From 51d3082fe6e55aecfa17113dbe98077c749f724c Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Wed, 23 Nov 2005 17:57:25 +1100
Subject: [PATCH] powerpc: Unify udbg (#2)

This patch unifies udbg for both ppc32 and ppc64 when building the
merged achitecture. xmon now has a single "back end". The powermac udbg
stuff gets enriched with some ADB capabilities and btext output. In
addition, the early_init callback is now called on ppc32 as well,
approx. in the same order as ppc64 regarding device-tree manipulations.
The init sequences of ppc32 and ppc64 are getting closer, I'll unify
them in a later patch.

For now, you can force udbg to the scc using "sccdbg" or to btext using
"btextdbg" on powermacs. I'll implement a cleaner way of forcing udbg
output to something else than the autodetected OF output device in a
later patch.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 drivers/macintosh/via-cuda.c | 48 ++++++++++++------------
 drivers/macintosh/via-pmu.c  | 87 ++++++++++++++++++++++++++++----------------
 2 files changed, 79 insertions(+), 56 deletions(-)

(limited to 'drivers/macintosh')

diff --git a/drivers/macintosh/via-cuda.c b/drivers/macintosh/via-cuda.c
index d843a6c..18ff770 100644
--- a/drivers/macintosh/via-cuda.c
+++ b/drivers/macintosh/via-cuda.c
@@ -127,39 +127,34 @@ struct adb_driver via_cuda_driver = {
 #endif /* CONFIG_ADB */
 
 #ifdef CONFIG_PPC
-int __init
-find_via_cuda(void)
+int __init find_via_cuda(void)
 {
-    int err;
     struct adb_request req;
+    phys_addr_t taddr;
+    u32 *reg;
+    int err;
 
     if (vias != 0)
 	return 1;
-    vias = find_devices("via-cuda");
+    vias = of_find_node_by_name(NULL, "via-cuda");
     if (vias == 0)
 	return 0;
-    if (vias->next != 0)
-	printk(KERN_WARNING "Warning: only using 1st via-cuda\n");
-
-#if 0
-    { int i;
-
-    printk("find_via_cuda: node = %p, addrs =", vias->node);
-    for (i = 0; i < vias->n_addrs; ++i)
-	printk(" %x(%x)", vias->addrs[i].address, vias->addrs[i].size);
-    printk(", intrs =");
-    for (i = 0; i < vias->n_intrs; ++i)
-	printk(" %x", vias->intrs[i].line);
-    printk("\n"); }
-#endif
 
-    if (vias->n_addrs != 1 || vias->n_intrs != 1) {
-	printk(KERN_ERR "via-cuda: expecting 1 address (%d) and 1 interrupt (%d)\n",
-	       vias->n_addrs, vias->n_intrs);
-	if (vias->n_addrs < 1 || vias->n_intrs < 1)
-	    return 0;
+    reg = (u32 *)get_property(vias, "reg", NULL);
+    if (reg == NULL) {
+	    printk(KERN_ERR "via-cuda: No \"reg\" property !\n");
+	    goto fail;
+    }
+    taddr = of_translate_address(vias, reg);
+    if (taddr == 0) {
+	    printk(KERN_ERR "via-cuda: Can't translate address !\n");
+	    goto fail;
+    }
+    via = ioremap(taddr, 0x2000);
+    if (via == NULL) {
+	    printk(KERN_ERR "via-cuda: Can't map address !\n");
+	    goto fail;
     }
-    via = ioremap(vias->addrs->address, 0x2000);
 
     cuda_state = idle;
     sys_ctrler = SYS_CTRLER_CUDA;
@@ -185,6 +180,11 @@ find_via_cuda(void)
 	cuda_poll();
 
     return 1;
+
+ fail:
+    of_node_put(vias);
+    vias = NULL;
+    return 0;
 }
 #endif /* CONFIG_PPC */
 
diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c
index 5640435..13881f1 100644
--- a/drivers/macintosh/via-pmu.c
+++ b/drivers/macintosh/via-pmu.c
@@ -147,6 +147,7 @@ static struct device_node *vias;
 static int pmu_kind = PMU_UNKNOWN;
 static int pmu_fully_inited = 0;
 static int pmu_has_adb;
+static struct device_node *gpio_node;
 static unsigned char __iomem *gpio_reg = NULL;
 static int gpio_irq = -1;
 static int gpio_irq_enabled = -1;
@@ -295,22 +296,26 @@ static struct backlight_controller pmu_backlight_controller = {
 };
 #endif /* CONFIG_PMAC_BACKLIGHT */
 
-int
-find_via_pmu(void)
+int __init find_via_pmu(void)
 {
+	phys_addr_t taddr;
+	u32 *reg;
+
 	if (via != 0)
 		return 1;
-	vias = find_devices("via-pmu");
-	if (vias == 0)
+	vias = of_find_node_by_name(NULL, "via-pmu");
+	if (vias == NULL)
 		return 0;
-	if (vias->next != 0)
-		printk(KERN_WARNING "Warning: only using 1st via-pmu\n");
 
-	if (vias->n_addrs < 1 || vias->n_intrs < 1) {
-		printk(KERN_ERR "via-pmu: %d addresses, %d interrupts!\n",
-		       vias->n_addrs, vias->n_intrs);
-		if (vias->n_addrs < 1 || vias->n_intrs < 1)
-			return 0;
+	reg = (u32 *)get_property(vias, "reg", NULL);
+	if (reg == NULL) {
+		printk(KERN_ERR "via-pmu: No \"reg\" property !\n");
+		goto fail;
+	}
+	taddr = of_translate_address(vias, reg);
+	if (taddr == 0) {
+		printk(KERN_ERR "via-pmu: Can't translate address !\n");
+		goto fail;
 	}
 
 	spin_lock_init(&pmu_lock);
@@ -331,7 +336,8 @@ find_via_pmu(void)
 		pmu_kind = PMU_HEATHROW_BASED;
 	else if (device_is_compatible(vias->parent, "Keylargo")
 		 || device_is_compatible(vias->parent, "K2-Keylargo")) {
-		struct device_node *gpio, *gpiop;
+		struct device_node *gpiop;
+		phys_addr_t gaddr = 0;
 
 		pmu_kind = PMU_KEYLARGO_BASED;
 		pmu_has_adb = (find_type_devices("adb") != NULL);
@@ -341,19 +347,24 @@ find_via_pmu(void)
 				PMU_INT_TICK |
 				PMU_INT_ENVIRONMENT;
 		
-		gpiop = find_devices("gpio");
-		if (gpiop && gpiop->n_addrs) {
-			gpio_reg = ioremap(gpiop->addrs->address, 0x10);
-			gpio = find_devices("extint-gpio1");
-			if (gpio == NULL)
-				gpio = find_devices("pmu-interrupt");
-			if (gpio && gpio->parent == gpiop && gpio->n_intrs)
-				gpio_irq = gpio->intrs[0].line;
+		gpiop = of_find_node_by_name(NULL, "gpio");
+		if (gpiop) {
+			reg = (u32 *)get_property(gpiop, "reg", NULL);
+			if (reg)
+				gaddr = of_translate_address(gpiop, reg);
+			if (gaddr != 0)
+				gpio_reg = ioremap(gaddr, 0x10);
 		}
+		if (gpio_reg == NULL)
+			printk(KERN_ERR "via-pmu: Can't find GPIO reg !\n");
 	} else
 		pmu_kind = PMU_UNKNOWN;
 
-	via = ioremap(vias->addrs->address, 0x2000);
+	via = ioremap(taddr, 0x2000);
+	if (via == NULL) {
+		printk(KERN_ERR "via-pmu: Can't map address !\n");
+		goto fail;
+	}
 	
 	out_8(&via[IER], IER_CLR | 0x7f);	/* disable all intrs */
 	out_8(&via[IFR], 0x7f);			/* clear IFR */
@@ -371,17 +382,19 @@ find_via_pmu(void)
 	sys_ctrler = SYS_CTRLER_PMU;
 	
 	return 1;
+ fail:
+	of_node_put(vias);
+	vias = NULL;
+	return 0;
 }
 
 #ifdef CONFIG_ADB
-static int
-pmu_probe(void)
+static int pmu_probe(void)
 {
 	return vias == NULL? -ENODEV: 0;
 }
 
-static int __init
-pmu_init(void)
+static int __init pmu_init(void)
 {
 	if (vias == NULL)
 		return -ENODEV;
@@ -405,7 +418,7 @@ static int __init via_pmu_start(void)
 	bright_req_2.complete = 1;
 	batt_req.complete = 1;
 
-#if defined(CONFIG_PPC32) && !defined(CONFIG_PPC_MERGE)
+#ifndef CONFIG_PPC_MERGE
 	if (pmu_kind == PMU_KEYLARGO_BASED)
 		openpic_set_irq_priority(vias->intrs[0].line,
 					 OPENPIC_PRIORITY_DEFAULT + 1);
@@ -418,10 +431,22 @@ static int __init via_pmu_start(void)
 		return -EAGAIN;
 	}
 
-	if (pmu_kind == PMU_KEYLARGO_BASED && gpio_irq != -1) {
-		if (request_irq(gpio_irq, gpio1_interrupt, 0, "GPIO1 ADB", (void *)0))
-			printk(KERN_ERR "pmu: can't get irq %d (GPIO1)\n", gpio_irq);
-		gpio_irq_enabled = 1;
+	if (pmu_kind == PMU_KEYLARGO_BASED) {
+		gpio_node = of_find_node_by_name(NULL, "extint-gpio1");
+		if (gpio_node == NULL)
+			gpio_node = of_find_node_by_name(NULL,
+							 "pmu-interrupt");
+		if (gpio_node && gpio_node->n_intrs > 0)
+			gpio_irq = gpio_node->intrs[0].line;
+
+		if (gpio_irq != -1) {
+			if (request_irq(gpio_irq, gpio1_interrupt, 0,
+					"GPIO1 ADB", (void *)0))
+				printk(KERN_ERR "pmu: can't get irq %d"
+				       " (GPIO1)\n", gpio_irq);
+			else
+				gpio_irq_enabled = 1;
+		}
 	}
 
 	/* Enable interrupts */
@@ -1371,7 +1396,6 @@ next:
 			}
 			pmu_done(req);
 		} else {
-#if defined(CONFIG_XMON) && !defined(CONFIG_PPC64)
 			if (len == 4 && data[1] == 0x2c) {
 				extern int xmon_wants_key, xmon_adb_keycode;
 				if (xmon_wants_key) {
@@ -1379,7 +1403,6 @@ next:
 					return;
 				}
 			}
-#endif /* defined(CONFIG_XMON) && !defined(CONFIG_PPC64) */
 #ifdef CONFIG_ADB
 			/*
 			 * XXX On the [23]400 the PMU gives us an up
-- 
cgit v1.1


From 2c5bd01f8f5d7c655d9d1aa60b696d980947e3be Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Wed, 23 Nov 2005 17:59:04 +1100
Subject: [PATCH] powerpc: convert macio_asic to use prom_parse

Converts the macio_asic core to use the new OF parsing routines instead
of relying on the pre-parsed values in struct device_node.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 drivers/macintosh/macio_asic.c | 234 ++++++++++++++++++++++++-----------------
 1 file changed, 140 insertions(+), 94 deletions(-)

(limited to 'drivers/macintosh')

diff --git a/drivers/macintosh/macio_asic.c b/drivers/macintosh/macio_asic.c
index 228e185..f14c744 100644
--- a/drivers/macintosh/macio_asic.c
+++ b/drivers/macintosh/macio_asic.c
@@ -3,6 +3,13 @@
  * a MacIO ASIC. Interface to new driver model mostly
  * stolen from the PCI version.
  * 
+ *  Copyright (C) 2005 Ben. Herrenschmidt (benh@kernel.crashing.org)
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
  * TODO:
  * 
  *  - Don't probe below media bay by default, but instead provide
@@ -218,12 +225,14 @@ postcore_initcall(macio_bus_driver_init);
 
 
 /**
- * macio_release_dev - free a macio device structure when all users of it are finished.
+ * macio_release_dev - free a macio device structure when all users of it are
+ * finished.
  * @dev: device that's been disconnected
  *
- * Will be called only by the device core when all users of this macio device are
- * done. This currently means never as we don't hot remove any macio device yet,
- * though that will happen with mediabay based devices in a later implementation.
+ * Will be called only by the device core when all users of this macio device
+ * are done. This currently means never as we don't hot remove any macio
+ * device yet, though that will happen with mediabay based devices in a later
+ * implementation.
  */
 static void macio_release_dev(struct device *dev)
 {
@@ -242,7 +251,8 @@ static void macio_release_dev(struct device *dev)
  * If this routine returns non-null, then the resource is completely
  * skipped.
  */
-static int macio_resource_quirks(struct device_node *np, struct resource *res, int index)
+static int macio_resource_quirks(struct device_node *np, struct resource *res,
+				 int index)
 {
 	if (res->flags & IORESOURCE_MEM) {
 		/* Grand Central has too large resource 0 on some machines */
@@ -258,12 +268,15 @@ static int macio_resource_quirks(struct device_node *np, struct resource *res, i
 			np->addrs[index].size = 0x100;
 			res->end = res->start + 0xff;
 		}
-		/* ESCC parent eats child resources. We could have added a level of hierarchy,
-		 * but I don't really feel the need for it */
+		/* ESCC parent eats child resources. We could have added a
+		 * level of hierarchy, but I don't really feel the need
+		 * for it
+		 */
 		if (!strcmp(np->name, "escc"))
 			return 1;
 		/* ESCC has bogus resources >= 3 */
-		if (index >= 3 && !(strcmp(np->name, "ch-a") && strcmp(np->name, "ch-b")))
+		if (index >= 3 && !(strcmp(np->name, "ch-a") &&
+				    strcmp(np->name, "ch-b")))
 			return 1;
 		/* Media bay has too many resources, keep only first one */
 		if (index > 0 && !strcmp(np->name, "media-bay"))
@@ -285,6 +298,71 @@ static int macio_resource_quirks(struct device_node *np, struct resource *res, i
 }
 
 
+static void macio_setup_interrupts(struct macio_dev *dev)
+{
+	struct device_node *np = dev->ofdev.node;
+	int i,j;
+
+	/* For now, we use pre-parsed entries in the device-tree for
+	 * interrupt routing and addresses, but we should change that
+	 * to dynamically parsed entries and so get rid of most of the
+	 * clutter in struct device_node
+	 */
+	for (i = j = 0; i < np->n_intrs; i++) {
+		struct resource *res = &dev->interrupt[j];
+
+		if (j >= MACIO_DEV_COUNT_IRQS)
+			break;
+		res->start = np->intrs[i].line;
+		res->flags = IORESOURCE_IO;
+		if (np->intrs[j].sense)
+			res->flags |= IORESOURCE_IRQ_LOWLEVEL;
+		else
+			res->flags |= IORESOURCE_IRQ_HIGHEDGE;
+		res->name = dev->ofdev.dev.bus_id;
+		if (macio_resource_quirks(np, res, i))
+			memset(res, 0, sizeof(struct resource));
+		else
+			j++;
+	}
+	dev->n_interrupts = j;
+}
+
+static void macio_setup_resources(struct macio_dev *dev,
+				  struct resource *parent_res)
+{
+	struct device_node *np = dev->ofdev.node;
+	u32 *addr;
+	u64 size;
+	int index;
+
+	for (index = 0; (addr = of_get_address(np, index, &size)) != NULL;
+	     index++) {
+		struct resource *res = &dev->resource[index];
+		if (index >= MACIO_DEV_COUNT_RESOURCES)
+			break;
+		res->start = of_translate_address(np, addr);
+		res->end = res->start + (unsigned long)size - 1;
+		res->flags = IORESOURCE_MEM;
+		res->name = dev->ofdev.dev.bus_id;
+
+		if (macio_resource_quirks(np, res, index)) {
+			memset(res, 0, sizeof(struct resource));
+			continue;
+		}
+		/* Currently, we consider failure as harmless, this may
+		 * change in the future, once I've found all the device
+		 * tree bugs in older machines & worked around them
+		 */
+		if (insert_resource(parent_res, res)) {
+			printk(KERN_WARNING "Can't request resource "
+			       "%d for MacIO device %s\n",
+			       index, dev->ofdev.dev.bus_id);
+		}
+	}
+	dev->n_resources = index;
+}
+
 /**
  * macio_add_one_device - Add one device from OF node to the device tree
  * @chip: pointer to the macio_chip holding the device
@@ -294,12 +372,13 @@ static int macio_resource_quirks(struct device_node *np, struct resource *res, i
  * When media-bay is changed to hotswap drivers, this function will
  * be exposed to the bay driver some way...
  */
-static struct macio_dev * macio_add_one_device(struct macio_chip *chip, struct device *parent,
-					       struct device_node *np, struct macio_dev *in_bay,
+static struct macio_dev * macio_add_one_device(struct macio_chip *chip,
+					       struct device *parent,
+					       struct device_node *np,
+					       struct macio_dev *in_bay,
 					       struct resource *parent_res)
 {
 	struct macio_dev *dev;
-	int i, j;
 	u32 *reg;
 	
 	if (np == NULL)
@@ -326,7 +405,8 @@ static struct macio_dev * macio_add_one_device(struct macio_chip *chip, struct d
 
 	/* MacIO itself has a different reg, we use it's PCI base */
 	if (np == chip->of_node) {
-		sprintf(dev->ofdev.dev.bus_id, "%1d.%08lx:%.*s", chip->lbus.index,
+		sprintf(dev->ofdev.dev.bus_id, "%1d.%08lx:%.*s",
+			chip->lbus.index,
 #ifdef CONFIG_PCI
 			pci_resource_start(chip->lbus.pdev, 0),
 #else
@@ -335,57 +415,16 @@ static struct macio_dev * macio_add_one_device(struct macio_chip *chip, struct d
 			MAX_NODE_NAME_SIZE, np->name);
 	} else {
 		reg = (u32 *)get_property(np, "reg", NULL);
-		sprintf(dev->ofdev.dev.bus_id, "%1d.%08x:%.*s", chip->lbus.index,
+		sprintf(dev->ofdev.dev.bus_id, "%1d.%08x:%.*s",
+			chip->lbus.index,
 			reg ? *reg : 0, MAX_NODE_NAME_SIZE, np->name);
 	}
 
-	/* For now, we use pre-parsed entries in the device-tree for
-	 * interrupt routing and addresses, but we should change that
-	 * to dynamically parsed entries and so get rid of most of the
-	 * clutter in struct device_node
-	 */
-	for (i = j = 0; i < np->n_intrs; i++) {
-		struct resource *res = &dev->interrupt[j];
-
-		if (j >= MACIO_DEV_COUNT_IRQS)
-			break;
-		res->start = np->intrs[i].line;
-		res->flags = IORESOURCE_IO;
-		if (np->intrs[j].sense)
-			res->flags |= IORESOURCE_IRQ_LOWLEVEL;
-		else
-			res->flags |= IORESOURCE_IRQ_HIGHEDGE;
-		res->name = dev->ofdev.dev.bus_id;
-		if (macio_resource_quirks(np, res, i))
-			memset(res, 0, sizeof(struct resource));
-		else
-			j++;
-	}
-	dev->n_interrupts = j;
-	for (i = j = 0; i < np->n_addrs; i++) {
-		struct resource *res = &dev->resource[j];
-		
-		if (j >= MACIO_DEV_COUNT_RESOURCES)
-			break;
-		res->start = np->addrs[i].address;
-		res->end = np->addrs[i].address + np->addrs[i].size - 1;
-		res->flags = IORESOURCE_MEM;
-		res->name = dev->ofdev.dev.bus_id;
-		if (macio_resource_quirks(np, res, i))
-			memset(res, 0, sizeof(struct resource));
-		else {
-			j++;
-			/* Currently, we consider failure as harmless, this may
-			 * change in the future, once I've found all the device
-			 * tree bugs in older machines & worked around them
-			 */
-			if (insert_resource(parent_res, res))
-       				printk(KERN_WARNING "Can't request resource %d for MacIO"
-				       " device %s\n", i, dev->ofdev.dev.bus_id);
-		}
-	}
-	dev->n_resources = j;
+	/* Setup interrupts & resources */
+	macio_setup_interrupts(dev);
+	macio_setup_resources(dev, parent_res);
 
+	/* Register with core */
 	if (of_device_register(&dev->ofdev) != 0) {
 		printk(KERN_DEBUG"macio: device registration error for %s!\n",
 		       dev->ofdev.dev.bus_id);
@@ -442,36 +481,42 @@ static void macio_pci_add_devices(struct macio_chip *chip)
 
 	/* First scan 1st level */
 	for (np = NULL; (np = of_get_next_child(pnode, np)) != NULL;) {
-		if (!macio_skip_device(np)) {
-			of_node_get(np);
-			mdev = macio_add_one_device(chip, &rdev->ofdev.dev, np, NULL, root_res);
-			if (mdev == NULL)
-				of_node_put(np);
-			else if (strncmp(np->name, "media-bay", 9) == 0)
-				mbdev = mdev;
-			else if (strncmp(np->name, "escc", 4) == 0)
-				sdev = mdev;
-		}
+		if (macio_skip_device(np))
+			continue;
+		of_node_get(np);
+		mdev = macio_add_one_device(chip, &rdev->ofdev.dev, np, NULL,
+					    root_res);
+		if (mdev == NULL)
+			of_node_put(np);
+		else if (strncmp(np->name, "media-bay", 9) == 0)
+			mbdev = mdev;
+		else if (strncmp(np->name, "escc", 4) == 0)
+			sdev = mdev;
 	}
 
 	/* Add media bay devices if any */
 	if (mbdev)
-		for (np = NULL; (np = of_get_next_child(mbdev->ofdev.node, np)) != NULL;)
-			if (!macio_skip_device(np)) {
-				of_node_get(np);
-				if (macio_add_one_device(chip, &mbdev->ofdev.dev, np, mbdev,
-							 root_res) == NULL)
-					of_node_put(np);
-			}
+		for (np = NULL; (np = of_get_next_child(mbdev->ofdev.node, np))
+			     != NULL;) {
+			if (macio_skip_device(np))
+				continue;
+			of_node_get(np);
+			if (macio_add_one_device(chip, &mbdev->ofdev.dev, np,
+						 mbdev,  root_res) == NULL)
+				of_node_put(np);
+		}
+
 	/* Add serial ports if any */
 	if (sdev) {
-		for (np = NULL; (np = of_get_next_child(sdev->ofdev.node, np)) != NULL;)
-			if (!macio_skip_device(np)) {
-				of_node_get(np);
-				if (macio_add_one_device(chip, &sdev->ofdev.dev, np, NULL,
-							 root_res) == NULL)
-					of_node_put(np);
-			}
+		for (np = NULL; (np = of_get_next_child(sdev->ofdev.node, np))
+			     != NULL;) {
+			if (macio_skip_device(np))
+				continue;
+			of_node_get(np);
+			if (macio_add_one_device(chip, &sdev->ofdev.dev, np,
+						 NULL, root_res) == NULL)
+				of_node_put(np);
+		}
 	}
 }
 
@@ -519,7 +564,8 @@ void macio_unregister_driver(struct macio_driver *drv)
  *	Returns 0 on success, or %EBUSY on error.  A warning
  *	message is also printed on failure.
  */
-int macio_request_resource(struct macio_dev *dev, int resource_no, const char *name)
+int macio_request_resource(struct macio_dev *dev, int resource_no,
+			   const char *name)
 {
 	if (macio_resource_len(dev, resource_no) == 0)
 		return 0;
@@ -606,20 +652,20 @@ static int __devinit macio_pci_probe(struct pci_dev *pdev, const struct pci_devi
 	if (ent->vendor != PCI_VENDOR_ID_APPLE)
 		return -ENODEV;
 
-	/* Note regarding refcounting: We assume pci_device_to_OF_node() is ported
-	 * to new OF APIs and returns a node with refcount incremented. This isn't
-	 * the case today, but on the other hand ppc32 doesn't do refcounting. This
-	 * will have to be fixed when going to ppc64. --BenH.
+	/* Note regarding refcounting: We assume pci_device_to_OF_node() is
+	 * ported to new OF APIs and returns a node with refcount incremented.
 	 */
 	np = pci_device_to_OF_node(pdev);
 	if (np == NULL)
 		return -ENODEV;
 
-	/* This assumption is wrong, fix that here for now until I fix the arch */
+	/* The above assumption is wrong !!!
+	 * fix that here for now until I fix the arch code
+	 */
 	of_node_get(np);
 
-	/* We also assume that pmac_feature will have done a get() on nodes stored
-	 * in the macio chips array
+	/* We also assume that pmac_feature will have done a get() on nodes
+	 * stored in the macio chips array
 	 */
 	chip = macio_find(np, macio_unknown);
        	of_node_put(np);
@@ -639,9 +685,9 @@ static int __devinit macio_pci_probe(struct pci_dev *pdev, const struct pci_devi
 
 	/*
 	 * HACK ALERT: The WallStreet PowerBook and some OHare based machines
-	 * have 2 macio ASICs. I must probe the "main" one first or IDE ordering
-	 * will be incorrect. So I put on "hold" the second one since it seem to
-	 * appear first on PCI
+	 * have 2 macio ASICs. I must probe the "main" one first or IDE
+	 * ordering will be incorrect. So I put on "hold" the second one since
+	 * it seem to appear first on PCI
 	 */
 	if (chip->type == macio_gatwick || chip->type == macio_ohareII)
 		if (macio_chips[0].lbus.pdev == NULL) {
-- 
cgit v1.1


From bb6b9b28d6847bc71f910e2e82c9040ff4b97ec0 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Wed, 30 Nov 2005 16:54:12 +1100
Subject: [PATCH] powerpc: udbg updates

The udbg low level io layer has an issue with udbg_getc() returning a
char (unsigned on ppc) instead of an int, thus the -1 if you had no
available input device could end up turned into 0xff, filling your
display with bogus characters. This fixes it, along with adding a little
blob to xmon to do a delay before exiting when getting an EOF and fixing
the detection of ADB keyboards in udbg_adb.c

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 drivers/macintosh/via-pmu.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/macintosh')

diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c
index 13881f1..d6dabee 100644
--- a/drivers/macintosh/via-pmu.c
+++ b/drivers/macintosh/via-pmu.c
@@ -313,7 +313,7 @@ int __init find_via_pmu(void)
 		goto fail;
 	}
 	taddr = of_translate_address(vias, reg);
-	if (taddr == 0) {
+	if (taddr == OF_BAD_ADDR) {
 		printk(KERN_ERR "via-pmu: Can't translate address !\n");
 		goto fail;
 	}
@@ -376,7 +376,7 @@ int __init find_via_pmu(void)
 		return 0;
 	}
 
-	printk(KERN_INFO "PMU driver %d initialized for %s, firmware: %02x\n",
+	printk(KERN_INFO "PMU driver v%d initialized for %s, firmware: %02x\n",
 	       PMU_DRIVER_VERSION, pbook_type[pmu_kind], pmu_version);
 	       
 	sys_ctrler = SYS_CTRLER_PMU;
-- 
cgit v1.1


From d2dd482bc17c3bc240045f80a7c4b4d5cea5e29c Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Wed, 30 Nov 2005 16:57:28 +1100
Subject: [PATCH] powerpc: Update OF address parsers

This updates the OF address parsers to return the IO flags
indicating the type of address obtained. It also adds a PCI
call for converting physical addresses that hit IO space into
into IO tokens, and add routines that return the translated
addresses into struct resource

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 drivers/macintosh/macio_asic.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

(limited to 'drivers/macintosh')

diff --git a/drivers/macintosh/macio_asic.c b/drivers/macintosh/macio_asic.c
index f14c744..0137ff2 100644
--- a/drivers/macintosh/macio_asic.c
+++ b/drivers/macintosh/macio_asic.c
@@ -332,18 +332,14 @@ static void macio_setup_resources(struct macio_dev *dev,
 				  struct resource *parent_res)
 {
 	struct device_node *np = dev->ofdev.node;
-	u32 *addr;
-	u64 size;
+	struct resource r;
 	int index;
 
-	for (index = 0; (addr = of_get_address(np, index, &size)) != NULL;
-	     index++) {
+	for (index = 0; of_address_to_resource(np, index, &r) == 0; index++) {
 		struct resource *res = &dev->resource[index];
 		if (index >= MACIO_DEV_COUNT_RESOURCES)
 			break;
-		res->start = of_translate_address(np, addr);
-		res->end = res->start + (unsigned long)size - 1;
-		res->flags = IORESOURCE_MEM;
+		*res = r;
 		res->name = dev->ofdev.dev.bus_id;
 
 		if (macio_resource_quirks(np, res, index)) {
@@ -353,7 +349,7 @@ static void macio_setup_resources(struct macio_dev *dev,
 		/* Currently, we consider failure as harmless, this may
 		 * change in the future, once I've found all the device
 		 * tree bugs in older machines & worked around them
-		 */
+l		 */
 		if (insert_resource(parent_res, res)) {
 			printk(KERN_WARNING "Can't request resource "
 			       "%d for MacIO device %s\n",
-- 
cgit v1.1


From cc5d0189b9ba95260857a5018a1c2fef90008507 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Tue, 13 Dec 2005 18:01:21 +1100
Subject: [PATCH] powerpc: Remove device_node addrs/n_addr

The pre-parsed addrs/n_addrs fields in struct device_node are finally
gone. Remove the dodgy heuristics that did that parsing at boot and
remove the fields themselves since we now have a good replacement with
the new OF parsing code. This patch also fixes a bunch of drivers to use
the new code instead, so that at least pmac32, pseries, iseries and g5
defconfigs build.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 drivers/macintosh/macio_asic.c | 26 +++++++++++++-------------
 drivers/macintosh/mediabay.c   |  8 +++++---
 drivers/macintosh/via-cuda.c   |  4 ----
 drivers/macintosh/via-pmu.c    |  9 +++------
 4 files changed, 21 insertions(+), 26 deletions(-)

(limited to 'drivers/macintosh')

diff --git a/drivers/macintosh/macio_asic.c b/drivers/macintosh/macio_asic.c
index 0137ff2..2a545ce 100644
--- a/drivers/macintosh/macio_asic.c
+++ b/drivers/macintosh/macio_asic.c
@@ -256,42 +256,42 @@ static int macio_resource_quirks(struct device_node *np, struct resource *res,
 {
 	if (res->flags & IORESOURCE_MEM) {
 		/* Grand Central has too large resource 0 on some machines */
-		if (index == 0 && !strcmp(np->name, "gc")) {
-			np->addrs[0].size = 0x20000;
+		if (index == 0 && !strcmp(np->name, "gc"))
 			res->end = res->start + 0x1ffff;
-		}
+
 		/* Airport has bogus resource 2 */
 		if (index >= 2 && !strcmp(np->name, "radio"))
 			return 1;
+
+#ifndef CONFIG_PPC64
 		/* DBDMAs may have bogus sizes */
-		if ((res->start & 0x0001f000) == 0x00008000) {
-			np->addrs[index].size = 0x100;
+		if ((res->start & 0x0001f000) == 0x00008000)
 			res->end = res->start + 0xff;
-		}
+#endif /* CONFIG_PPC64 */
+
 		/* ESCC parent eats child resources. We could have added a
 		 * level of hierarchy, but I don't really feel the need
 		 * for it
 		 */
 		if (!strcmp(np->name, "escc"))
 			return 1;
+
 		/* ESCC has bogus resources >= 3 */
 		if (index >= 3 && !(strcmp(np->name, "ch-a") &&
 				    strcmp(np->name, "ch-b")))
 			return 1;
+
 		/* Media bay has too many resources, keep only first one */
 		if (index > 0 && !strcmp(np->name, "media-bay"))
 			return 1;
+
 		/* Some older IDE resources have bogus sizes */
 		if (!(strcmp(np->name, "IDE") && strcmp(np->name, "ATA") &&
 		      strcmp(np->type, "ide") && strcmp(np->type, "ata"))) {
-			if (index == 0 && np->addrs[0].size > 0x1000) {
-				np->addrs[0].size = 0x1000;
+			if (index == 0 && (res->end - res->start) > 0xfff)
 				res->end = res->start + 0xfff;
-			}
-			if (index == 1 && np->addrs[1].size > 0x100) {
-				np->addrs[1].size = 0x100;
+			if (index == 1 && (res->end - res->start) > 0xff)
 				res->end = res->start + 0xff;
-			}
 		}
 	}
 	return 0;
@@ -349,7 +349,7 @@ static void macio_setup_resources(struct macio_dev *dev,
 		/* Currently, we consider failure as harmless, this may
 		 * change in the future, once I've found all the device
 		 * tree bugs in older machines & worked around them
-l		 */
+		 */
 		if (insert_resource(parent_res, res)) {
 			printk(KERN_WARNING "Can't request resource "
 			       "%d for MacIO device %s\n",
diff --git a/drivers/macintosh/mediabay.c b/drivers/macintosh/mediabay.c
index b856bb6..8dbf285 100644
--- a/drivers/macintosh/mediabay.c
+++ b/drivers/macintosh/mediabay.c
@@ -647,6 +647,7 @@ static int __devinit media_bay_attach(struct macio_dev *mdev, const struct of_de
 	struct media_bay_info* bay;
 	u32 __iomem *regbase;
 	struct device_node *ofnode;
+	unsigned long base;
 	int i;
 
 	ofnode = mdev->ofdev.node;
@@ -656,10 +657,11 @@ static int __devinit media_bay_attach(struct macio_dev *mdev, const struct of_de
 	if (macio_request_resources(mdev, "media-bay"))
 		return -EBUSY;
 	/* Media bay registers are located at the beginning of the
-         * mac-io chip, we get the parent address for now (hrm...)
+         * mac-io chip, for now, we trick and align down the first
+	 * resource passed in
          */
-	regbase = (u32 __iomem *)
-		ioremap(ofnode->parent->addrs[0].address, 0x100);
+	base = macio_resource_start(mdev, 0) & 0xffff0000u;
+	regbase = (u32 __iomem *)ioremap(base, 0x100);
 	if (regbase == NULL) {
 		macio_release_resources(mdev);
 		return -ENOMEM;
diff --git a/drivers/macintosh/via-cuda.c b/drivers/macintosh/via-cuda.c
index 18ff770..2d9d791 100644
--- a/drivers/macintosh/via-cuda.c
+++ b/drivers/macintosh/via-cuda.c
@@ -193,10 +193,6 @@ static int __init via_cuda_start(void)
     if (via == NULL)
 	return -ENODEV;
 
-#ifdef CONFIG_PPC
-    request_OF_resource(vias, 0, NULL);
-#endif
-
     if (request_irq(CUDA_IRQ, cuda_interrupt, 0, "ADB", cuda_interrupt)) {
 	printk(KERN_ERR "cuda_init: can't get irq %d\n", CUDA_IRQ);
 	return -EAGAIN;
diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c
index d6dabee..79c7b44 100644
--- a/drivers/macintosh/via-pmu.c
+++ b/drivers/macintosh/via-pmu.c
@@ -298,7 +298,7 @@ static struct backlight_controller pmu_backlight_controller = {
 
 int __init find_via_pmu(void)
 {
-	phys_addr_t taddr;
+	u64 taddr;
 	u32 *reg;
 
 	if (via != 0)
@@ -337,7 +337,7 @@ int __init find_via_pmu(void)
 	else if (device_is_compatible(vias->parent, "Keylargo")
 		 || device_is_compatible(vias->parent, "K2-Keylargo")) {
 		struct device_node *gpiop;
-		phys_addr_t gaddr = 0;
+		u64 gaddr = OF_BAD_ADDR;
 
 		pmu_kind = PMU_KEYLARGO_BASED;
 		pmu_has_adb = (find_type_devices("adb") != NULL);
@@ -352,7 +352,7 @@ int __init find_via_pmu(void)
 			reg = (u32 *)get_property(gpiop, "reg", NULL);
 			if (reg)
 				gaddr = of_translate_address(gpiop, reg);
-			if (gaddr != 0)
+			if (gaddr != OF_BAD_ADDR)
 				gpio_reg = ioremap(gaddr, 0x10);
 		}
 		if (gpio_reg == NULL)
@@ -479,9 +479,6 @@ static int __init via_pmu_dev_init(void)
 	if (vias == NULL)
 		return -ENODEV;
 
-#ifndef CONFIG_PPC64
-	request_OF_resource(vias, 0, NULL);
-#endif
 #ifdef CONFIG_PMAC_BACKLIGHT
 	/* Enable backlight */
 	register_backlight_controller(&pmu_backlight_controller, NULL, "pmu");
-- 
cgit v1.1


From 1beb6a7d6cbed3ac03500ce9b5b9bb632c512039 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Wed, 14 Dec 2005 13:10:10 +1100
Subject: [PATCH] powerpc: Experimental support for new G5 Macs (#2)

This adds some very basic support for the new machines, including the
Quad G5 (tested), and other new dual core based machines and iMac G5
iSight (untested). This is still experimental !  There is no thermal
control yet, there is no proper handing of MSIs, etc.. but it
boots, I have all 4 cores up on my machine. Compared to the previous
version of this patch, this one adds DART IOMMU support for the U4
chipset and thus should work fine on setups with more than 2Gb of RAM.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 drivers/macintosh/smu.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

(limited to 'drivers/macintosh')

diff --git a/drivers/macintosh/smu.c b/drivers/macintosh/smu.c
index e837827..9622611 100644
--- a/drivers/macintosh/smu.c
+++ b/drivers/macintosh/smu.c
@@ -53,7 +53,7 @@
 #undef DEBUG_SMU
 
 #ifdef DEBUG_SMU
-#define DPRINTK(fmt, args...) do { udbg_printf(KERN_DEBUG fmt , ##args); } while (0)
+#define DPRINTK(fmt, args...) do { printk(KERN_DEBUG fmt , ##args); } while (0)
 #else
 #define DPRINTK(fmt, args...) do { } while (0)
 #endif
@@ -909,10 +909,13 @@ static struct smu_sdbp_header *smu_create_sdb_partition(int id)
 	struct property *prop;
 
 	/* First query the partition info */
+	DPRINTK("SMU: Query partition infos ... (irq=%d)\n", smu->db_irq);
 	smu_queue_simple(&cmd, SMU_CMD_PARTITION_COMMAND, 2,
 			 smu_done_complete, &comp,
 			 SMU_CMD_PARTITION_LATEST, id);
 	wait_for_completion(&comp);
+	DPRINTK("SMU: done, status: %d, reply_len: %d\n",
+		cmd.cmd.status, cmd.cmd.reply_len);
 
 	/* Partition doesn't exist (or other error) */
 	if (cmd.cmd.status != 0 || cmd.cmd.reply_len != 6)
@@ -975,6 +978,8 @@ struct smu_sdbp_header *__smu_get_sdb_partition(int id, unsigned int *size,
 
 	sprintf(pname, "sdb-partition-%02x", id);
 
+	DPRINTK("smu_get_sdb_partition(%02x)\n", id);
+
 	if (interruptible) {
 		int rc;
 		rc = down_interruptible(&smu_part_access);
@@ -986,6 +991,7 @@ struct smu_sdbp_header *__smu_get_sdb_partition(int id, unsigned int *size,
 	part = (struct smu_sdbp_header *)get_property(smu->of_node,
 						      pname, size);
 	if (part == NULL) {
+		DPRINTK("trying to extract from SMU ...\n");
 		part = smu_create_sdb_partition(id);
 		if (part != NULL && size)
 			*size = part->len << 2;
-- 
cgit v1.1


From a04c8780fd234aeeba5e87f7e37beffd05ef21ae Mon Sep 17 00:00:00 2001
From: Kristian Mueller <Kristian-M@Kristian-M.de>
Date: Thu, 15 Dec 2005 12:31:55 +0800
Subject: [PATCH] via-pmu: compile without Power Management support

Fix compilation of via-pmu.c without Power Management support.

Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 drivers/macintosh/via-pmu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/macintosh')

diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c
index 79c7b44..3c05520 100644
--- a/drivers/macintosh/via-pmu.c
+++ b/drivers/macintosh/via-pmu.c
@@ -158,8 +158,8 @@ static int pmu_version;
 static int drop_interrupts;
 #if defined(CONFIG_PM) && defined(CONFIG_PPC32)
 static int option_lid_wakeup = 1;
-static int sleep_in_progress;
 #endif /* CONFIG_PM && CONFIG_PPC32 */
+static int sleep_in_progress;
 static unsigned long async_req_locks;
 static unsigned int pmu_irq_stats[11];
 
-- 
cgit v1.1


From 730745a5c45093982112ddc94cee6a9973455641 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Sat, 7 Jan 2006 11:30:44 +1100
Subject: [PATCH] 1/5 powerpc: Rework PowerMac i2c part 1

This is the first part of a rework of the PowerMac i2c code. It
completely reworks the "low_i2c" layer. It is now more flexible,
supports KeyWest, SMU and PMU i2c busses, and provides functions to
match device nodes to i2c busses and adapters.

This patch also extends & fix some bugs in the SMU driver related to i2c
support and removes the clock spreading hacks from the pmac feature code
rather than adapting them to the new API since they'll be replaced by
the platform function code completely in patch 3/5

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 drivers/macintosh/smu.c     |  58 ++++++----
 drivers/macintosh/via-pmu.c | 264 +-------------------------------------------
 2 files changed, 38 insertions(+), 284 deletions(-)

(limited to 'drivers/macintosh')

diff --git a/drivers/macintosh/smu.c b/drivers/macintosh/smu.c
index 9622611..9ecd768 100644
--- a/drivers/macintosh/smu.c
+++ b/drivers/macintosh/smu.c
@@ -94,6 +94,8 @@ struct smu_device {
 static struct smu_device	*smu;
 static DECLARE_MUTEX(smu_part_access);
 
+static void smu_i2c_retry(unsigned long data);
+
 /*
  * SMU driver low level stuff
  */
@@ -469,7 +471,6 @@ int __init smu_init (void)
 	smu->of_node = np;
 	smu->db_irq = NO_IRQ;
 	smu->msg_irq = NO_IRQ;
-	init_timer(&smu->i2c_timer);
 
 	/* smu_cmdbuf_abs is in the low 2G of RAM, can be converted to a
 	 * 32 bits value safely
@@ -544,6 +545,10 @@ static int smu_late_init(void)
 	if (!smu)
 		return 0;
 
+	init_timer(&smu->i2c_timer);
+	smu->i2c_timer.function = smu_i2c_retry;
+	smu->i2c_timer.data = (unsigned long)smu;
+
 	/*
 	 * Try to request the interrupts
 	 */
@@ -570,28 +575,41 @@ static int smu_late_init(void)
 
 	return 0;
 }
-arch_initcall(smu_late_init);
+/* This has to be before arch_initcall as the low i2c stuff relies on the
+ * above having been done before we reach arch_initcalls
+ */
+core_initcall(smu_late_init);
 
 /*
  * sysfs visibility
  */
 
+static void smu_create_i2c(struct device_node *np)
+{
+	char name[32];
+	u32 *reg = (u32 *)get_property(np, "reg", NULL);
+
+	if (reg != NULL) {
+		sprintf(name, "smu-i2c-%02x", *reg);
+		of_platform_device_create(np, name, &smu->of_dev->dev);
+	}
+}
+
 static void smu_expose_childs(void *unused)
 {
-	struct device_node *np;
+	struct device_node *np, *gp;
 
 	for (np = NULL; (np = of_get_next_child(smu->of_node, np)) != NULL;) {
-		if (device_is_compatible(np, "smu-i2c")) {
-			char name[32];
-			u32 *reg = (u32 *)get_property(np, "reg", NULL);
-
-			if (reg == NULL)
-				continue;
-			sprintf(name, "smu-i2c-%02x", *reg);
-			of_platform_device_create(np, name, &smu->of_dev->dev);
-		}
+		if (device_is_compatible(np, "smu-i2c-control")) {
+			gp = NULL;
+			while ((gp = of_get_next_child(np, gp)) != NULL)
+				if (device_is_compatible(gp, "i2c-bus"))
+					smu_create_i2c(gp);
+		} else if (device_is_compatible(np, "smu-i2c"))
+			smu_create_i2c(np);
 		if (device_is_compatible(np, "smu-sensors"))
-			of_platform_device_create(np, "smu-sensors", &smu->of_dev->dev);
+			of_platform_device_create(np, "smu-sensors",
+						  &smu->of_dev->dev);
 	}
 
 }
@@ -712,13 +730,13 @@ static void smu_i2c_complete_command(struct smu_i2c_cmd *cmd, int fail)
 
 static void smu_i2c_retry(unsigned long data)
 {
-	struct smu_i2c_cmd	*cmd = (struct smu_i2c_cmd *)data;
+	struct smu_i2c_cmd	*cmd = smu->cmd_i2c_cur;
 
 	DPRINTK("SMU: i2c failure, requeuing...\n");
 
 	/* requeue command simply by resetting reply_len */
 	cmd->pdata[0] = 0xff;
-	cmd->scmd.reply_len = 0x10;
+	cmd->scmd.reply_len = sizeof(cmd->pdata);
 	smu_queue_cmd(&cmd->scmd);
 }
 
@@ -747,10 +765,8 @@ static void smu_i2c_low_completion(struct smu_cmd *scmd, void *misc)
 	 */
 	if (fail && --cmd->retries > 0) {
 		DPRINTK("SMU: i2c failure, starting timer...\n");
-		smu->i2c_timer.function = smu_i2c_retry;
-		smu->i2c_timer.data = (unsigned long)cmd;
-		smu->i2c_timer.expires = jiffies + msecs_to_jiffies(5);
-		add_timer(&smu->i2c_timer);
+		BUG_ON(cmd != smu->cmd_i2c_cur);
+		mod_timer(&smu->i2c_timer, jiffies + msecs_to_jiffies(5));
 		return;
 	}
 
@@ -764,7 +780,7 @@ static void smu_i2c_low_completion(struct smu_cmd *scmd, void *misc)
 
 	/* Ok, initial command complete, now poll status */
 	scmd->reply_buf = cmd->pdata;
-	scmd->reply_len = 0x10;
+	scmd->reply_len = sizeof(cmd->pdata);
 	scmd->data_buf = cmd->pdata;
 	scmd->data_len = 1;
 	cmd->pdata[0] = 0;
@@ -786,7 +802,7 @@ int smu_queue_i2c(struct smu_i2c_cmd *cmd)
 	cmd->scmd.done = smu_i2c_low_completion;
 	cmd->scmd.misc = cmd;
 	cmd->scmd.reply_buf = cmd->pdata;
-	cmd->scmd.reply_len = 0x10;
+	cmd->scmd.reply_len = sizeof(cmd->pdata);
 	cmd->scmd.data_buf = (u8 *)(char *)&cmd->info;
 	cmd->scmd.status = 1;
 	cmd->stage = 0;
diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c
index 3c05520..aa481a8 100644
--- a/drivers/macintosh/via-pmu.c
+++ b/drivers/macintosh/via-pmu.c
@@ -197,7 +197,6 @@ static int pmu_adb_reset_bus(void);
 #endif /* CONFIG_ADB */
 
 static int init_pmu(void);
-static int pmu_queue_request(struct adb_request *req);
 static void pmu_start(void);
 static irqreturn_t via_pmu_interrupt(int irq, void *arg, struct pt_regs *regs);
 static irqreturn_t gpio1_interrupt(int irq, void *arg, struct pt_regs *regs);
@@ -1802,258 +1801,6 @@ pmu_present(void)
 	return via != 0;
 }
 
-struct pmu_i2c_hdr {
-	u8	bus;
-	u8	mode;
-	u8	bus2;
-	u8	address;
-	u8	sub_addr;
-	u8	comb_addr;
-	u8	count;
-};
-
-int
-pmu_i2c_combined_read(int bus, int addr, int subaddr,  u8* data, int len)
-{
-	struct adb_request	req;
-	struct pmu_i2c_hdr	*hdr = (struct pmu_i2c_hdr *)&req.data[1];
-	int retry;
-	int rc;
-
-	for (retry=0; retry<16; retry++) {
-		memset(&req, 0, sizeof(req));
-
-		hdr->bus = bus;
-		hdr->address = addr & 0xfe;
-		hdr->mode = PMU_I2C_MODE_COMBINED;
-		hdr->bus2 = 0;
-		hdr->sub_addr = subaddr;
-		hdr->comb_addr = addr | 1;
-		hdr->count = len;
-		
-		req.nbytes = sizeof(struct pmu_i2c_hdr) + 1;
-		req.reply_expected = 0;
-		req.reply_len = 0;
-		req.data[0] = PMU_I2C_CMD;
-		req.reply[0] = 0xff;
-		rc = pmu_queue_request(&req);
-		if (rc)
-			return rc;
-		while(!req.complete)
-			pmu_poll();
-		if (req.reply[0] == PMU_I2C_STATUS_OK)
-			break;
-		mdelay(15);
-	}
-	if (req.reply[0] != PMU_I2C_STATUS_OK)
-		return -1;
-
-	for (retry=0; retry<16; retry++) {
-		memset(&req, 0, sizeof(req));
-
-		mdelay(15);
-
-		hdr->bus = PMU_I2C_BUS_STATUS;
-		req.reply[0] = 0xff;
-		
-		req.nbytes = 2;
-		req.reply_expected = 0;
-		req.reply_len = 0;
-		req.data[0] = PMU_I2C_CMD;
-		rc = pmu_queue_request(&req);
-		if (rc)
-			return rc;
-		while(!req.complete)
-			pmu_poll();
-		if (req.reply[0] == PMU_I2C_STATUS_DATAREAD) {
-			memcpy(data, &req.reply[1], req.reply_len - 1);
-			return req.reply_len - 1;
-		}
-	}
-	return -1;
-}
-
-int
-pmu_i2c_stdsub_write(int bus, int addr, int subaddr,  u8* data, int len)
-{
-	struct adb_request	req;
-	struct pmu_i2c_hdr	*hdr = (struct pmu_i2c_hdr *)&req.data[1];
-	int retry;
-	int rc;
-
-	for (retry=0; retry<16; retry++) {
-		memset(&req, 0, sizeof(req));
-
-		hdr->bus = bus;
-		hdr->address = addr & 0xfe;
-		hdr->mode = PMU_I2C_MODE_STDSUB;
-		hdr->bus2 = 0;
-		hdr->sub_addr = subaddr;
-		hdr->comb_addr = addr & 0xfe;
-		hdr->count = len;
-
-		req.data[0] = PMU_I2C_CMD;
-		memcpy(&req.data[sizeof(struct pmu_i2c_hdr) + 1], data, len);
-		req.nbytes = sizeof(struct pmu_i2c_hdr) + len + 1;
-		req.reply_expected = 0;
-		req.reply_len = 0;
-		req.reply[0] = 0xff;
-		rc = pmu_queue_request(&req);
-		if (rc)
-			return rc;
-		while(!req.complete)
-			pmu_poll();
-		if (req.reply[0] == PMU_I2C_STATUS_OK)
-			break;
-		mdelay(15);
-	}
-	if (req.reply[0] != PMU_I2C_STATUS_OK)
-		return -1;
-
-	for (retry=0; retry<16; retry++) {
-		memset(&req, 0, sizeof(req));
-
-		mdelay(15);
-
-		hdr->bus = PMU_I2C_BUS_STATUS;
-		req.reply[0] = 0xff;
-		
-		req.nbytes = 2;
-		req.reply_expected = 0;
-		req.reply_len = 0;
-		req.data[0] = PMU_I2C_CMD;
-		rc = pmu_queue_request(&req);
-		if (rc)
-			return rc;
-		while(!req.complete)
-			pmu_poll();
-		if (req.reply[0] == PMU_I2C_STATUS_OK)
-			return len;
-	}
-	return -1;
-}
-
-int
-pmu_i2c_simple_read(int bus, int addr,  u8* data, int len)
-{
-	struct adb_request	req;
-	struct pmu_i2c_hdr	*hdr = (struct pmu_i2c_hdr *)&req.data[1];
-	int retry;
-	int rc;
-
-	for (retry=0; retry<16; retry++) {
-		memset(&req, 0, sizeof(req));
-
-		hdr->bus = bus;
-		hdr->address = addr | 1;
-		hdr->mode = PMU_I2C_MODE_SIMPLE;
-		hdr->bus2 = 0;
-		hdr->sub_addr = 0;
-		hdr->comb_addr = 0;
-		hdr->count = len;
-
-		req.data[0] = PMU_I2C_CMD;
-		req.nbytes = sizeof(struct pmu_i2c_hdr) + 1;
-		req.reply_expected = 0;
-		req.reply_len = 0;
-		req.reply[0] = 0xff;
-		rc = pmu_queue_request(&req);
-		if (rc)
-			return rc;
-		while(!req.complete)
-			pmu_poll();
-		if (req.reply[0] == PMU_I2C_STATUS_OK)
-			break;
-		mdelay(15);
-	}
-	if (req.reply[0] != PMU_I2C_STATUS_OK)
-		return -1;
-
-	for (retry=0; retry<16; retry++) {
-		memset(&req, 0, sizeof(req));
-
-		mdelay(15);
-
-		hdr->bus = PMU_I2C_BUS_STATUS;
-		req.reply[0] = 0xff;
-		
-		req.nbytes = 2;
-		req.reply_expected = 0;
-		req.reply_len = 0;
-		req.data[0] = PMU_I2C_CMD;
-		rc = pmu_queue_request(&req);
-		if (rc)
-			return rc;
-		while(!req.complete)
-			pmu_poll();
-		if (req.reply[0] == PMU_I2C_STATUS_DATAREAD) {
-			memcpy(data, &req.reply[1], req.reply_len - 1);
-			return req.reply_len - 1;
-		}
-	}
-	return -1;
-}
-
-int
-pmu_i2c_simple_write(int bus, int addr,  u8* data, int len)
-{
-	struct adb_request	req;
-	struct pmu_i2c_hdr	*hdr = (struct pmu_i2c_hdr *)&req.data[1];
-	int retry;
-	int rc;
-
-	for (retry=0; retry<16; retry++) {
-		memset(&req, 0, sizeof(req));
-
-		hdr->bus = bus;
-		hdr->address = addr & 0xfe;
-		hdr->mode = PMU_I2C_MODE_SIMPLE;
-		hdr->bus2 = 0;
-		hdr->sub_addr = 0;
-		hdr->comb_addr = 0;
-		hdr->count = len;
-
-		req.data[0] = PMU_I2C_CMD;
-		memcpy(&req.data[sizeof(struct pmu_i2c_hdr) + 1], data, len);
-		req.nbytes = sizeof(struct pmu_i2c_hdr) + len + 1;
-		req.reply_expected = 0;
-		req.reply_len = 0;
-		req.reply[0] = 0xff;
-		rc = pmu_queue_request(&req);
-		if (rc)
-			return rc;
-		while(!req.complete)
-			pmu_poll();
-		if (req.reply[0] == PMU_I2C_STATUS_OK)
-			break;
-		mdelay(15);
-	}
-	if (req.reply[0] != PMU_I2C_STATUS_OK)
-		return -1;
-
-	for (retry=0; retry<16; retry++) {
-		memset(&req, 0, sizeof(req));
-
-		mdelay(15);
-
-		hdr->bus = PMU_I2C_BUS_STATUS;
-		req.reply[0] = 0xff;
-		
-		req.nbytes = 2;
-		req.reply_expected = 0;
-		req.reply_len = 0;
-		req.data[0] = PMU_I2C_CMD;
-		rc = pmu_queue_request(&req);
-		if (rc)
-			return rc;
-		while(!req.complete)
-			pmu_poll();
-		if (req.reply[0] == PMU_I2C_STATUS_OK)
-			return len;
-	}
-	return -1;
-}
-
 #ifdef CONFIG_PM
 
 static LIST_HEAD(sleep_notifiers);
@@ -2358,9 +2105,6 @@ pmac_suspend_devices(void)
 		return -EBUSY;
 	}
 
-	/* Disable clock spreading on some machines */
-	pmac_tweak_clock_spreading(0);
-
 	/* Stop preemption */
 	preempt_disable();
 
@@ -2431,9 +2175,6 @@ pmac_wakeup_devices(void)
 	mdelay(10);
 	preempt_enable();
 
-	/* Re-enable clock spreading on some machines */
-	pmac_tweak_clock_spreading(1);
-
 	/* Resume devices */
 	device_resume();
 
@@ -3150,16 +2891,13 @@ static int __init init_pmu_sysfs(void)
 subsys_initcall(init_pmu_sysfs);
 
 EXPORT_SYMBOL(pmu_request);
+EXPORT_SYMBOL(pmu_queue_request);
 EXPORT_SYMBOL(pmu_poll);
 EXPORT_SYMBOL(pmu_poll_adb);
 EXPORT_SYMBOL(pmu_wait_complete);
 EXPORT_SYMBOL(pmu_suspend);
 EXPORT_SYMBOL(pmu_resume);
 EXPORT_SYMBOL(pmu_unlock);
-EXPORT_SYMBOL(pmu_i2c_combined_read);
-EXPORT_SYMBOL(pmu_i2c_stdsub_write);
-EXPORT_SYMBOL(pmu_i2c_simple_read);
-EXPORT_SYMBOL(pmu_i2c_simple_write);
 #if defined(CONFIG_PM) && defined(CONFIG_PPC32)
 EXPORT_SYMBOL(pmu_enable_irled);
 EXPORT_SYMBOL(pmu_battery_count);
-- 
cgit v1.1


From a28d3af2a26c89aaa6470ca36edb212e05143d67 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Sat, 7 Jan 2006 11:35:26 +1100
Subject: [PATCH] 2/5 powerpc: Rework PowerMac i2c part 2

This is the continuation of the previous patch. This one removes the old
PowerMac i2c drivers (i2c-keywest and i2c-pmac-smu) and replaces them
both with a single stub driver that uses the new PowerMac low i2c layer.

Now that i2c-keywest is gone, the low-i2c code is extended to support
interrupt driver transfers. All i2c busses now appear as platform
devices. Compatibility with existing drivers should be maintained as the
i2c bus names have been kept identical, except for the SMU bus but in
that later case, all users has been fixed.

With that patch added, matching a device node to an i2c_adapter becomes
trivial.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 drivers/macintosh/Kconfig                | 10 +++----
 drivers/macintosh/smu.c                  | 26 ++---------------
 drivers/macintosh/windfarm_lm75_sensor.c | 50 +++++---------------------------
 3 files changed, 16 insertions(+), 70 deletions(-)

(limited to 'drivers/macintosh')

diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig
index a0ea44c..7d4a0ac 100644
--- a/drivers/macintosh/Kconfig
+++ b/drivers/macintosh/Kconfig
@@ -149,14 +149,14 @@ config MAC_EMUMOUSEBTN
 
 config THERM_WINDTUNNEL
 	tristate "Support for thermal management on Windtunnel G4s"
-	depends on I2C && I2C_KEYWEST && PPC_PMAC && !PPC_PMAC64
+	depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64
 	help
 	  This driver provides some thermostat and fan control for the desktop
 	  G4 "Windtunnel"
 
 config THERM_ADT746X
 	tristate "Support for thermal mgmnt on laptops with ADT 746x chipset"
-	depends on I2C && I2C_KEYWEST && PPC_PMAC && !PPC_PMAC64
+	depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64
 	help
 	  This driver provides some thermostat and fan control for the
           iBook G4, and the ATI based aluminium PowerBooks, allowing slighlty
@@ -164,7 +164,7 @@ config THERM_ADT746X
 
 config THERM_PM72
 	tristate "Support for thermal management on PowerMac G5"
-	depends on I2C && I2C_KEYWEST && PPC_PMAC64
+	depends on I2C && I2C_POWERMAC && PPC_PMAC64
 	help
 	  This driver provides thermostat and fan control for the desktop
 	  G5 machines. 
@@ -175,14 +175,14 @@ config WINDFARM
 config WINDFARM_PM81
 	tristate "Support for thermal management on iMac G5"
 	depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU
-	select I2C_PMAC_SMU
+	select I2C_POWERMAC
 	help
 	  This driver provides thermal control for the iMacG5
 
 config WINDFARM_PM91
 	tristate "Support for thermal management on PowerMac9,1"
 	depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU
-	select I2C_PMAC_SMU
+	select I2C_POWERMAC
 	help
 	  This driver provides thermal control for the PowerMac9,1
           which is the recent (SMU based) single CPU desktop G5
diff --git a/drivers/macintosh/smu.c b/drivers/macintosh/smu.c
index 9ecd768..db2ae71 100644
--- a/drivers/macintosh/smu.c
+++ b/drivers/macintosh/smu.c
@@ -584,34 +584,14 @@ core_initcall(smu_late_init);
  * sysfs visibility
  */
 
-static void smu_create_i2c(struct device_node *np)
-{
-	char name[32];
-	u32 *reg = (u32 *)get_property(np, "reg", NULL);
-
-	if (reg != NULL) {
-		sprintf(name, "smu-i2c-%02x", *reg);
-		of_platform_device_create(np, name, &smu->of_dev->dev);
-	}
-}
-
 static void smu_expose_childs(void *unused)
 {
-	struct device_node *np, *gp;
-
-	for (np = NULL; (np = of_get_next_child(smu->of_node, np)) != NULL;) {
-		if (device_is_compatible(np, "smu-i2c-control")) {
-			gp = NULL;
-			while ((gp = of_get_next_child(np, gp)) != NULL)
-				if (device_is_compatible(gp, "i2c-bus"))
-					smu_create_i2c(gp);
-		} else if (device_is_compatible(np, "smu-i2c"))
-			smu_create_i2c(np);
+	struct device_node *np;
+
+	for (np = NULL; (np = of_get_next_child(smu->of_node, np)) != NULL;)
 		if (device_is_compatible(np, "smu-sensors"))
 			of_platform_device_create(np, "smu-sensors",
 						  &smu->of_dev->dev);
-	}
-
 }
 
 static DECLARE_WORK(smu_expose_childs_work, smu_expose_childs, NULL);
diff --git a/drivers/macintosh/windfarm_lm75_sensor.c b/drivers/macintosh/windfarm_lm75_sensor.c
index 57460e4..906d3ec 100644
--- a/drivers/macintosh/windfarm_lm75_sensor.c
+++ b/drivers/macintosh/windfarm_lm75_sensor.c
@@ -21,6 +21,7 @@
 #include <asm/io.h>
 #include <asm/system.h>
 #include <asm/sections.h>
+#include <asm/pmac_low_i2c.h>
 
 #include "windfarm.h"
 
@@ -157,53 +158,21 @@ static struct wf_lm75_sensor *wf_lm75_create(struct i2c_adapter *adapter,
 
 static int wf_lm75_attach(struct i2c_adapter *adapter)
 {
-	u8 bus_id;
-	struct device_node *smu, *bus, *dev;
-
-	/* We currently only deal with LM75's hanging off the SMU
-	 * i2c busses. If we extend that driver to other/older
-	 * machines, we should split this function into SMU-i2c,
-	 * keywest-i2c, PMU-i2c, ...
-	 */
+	struct device_node *busnode, *dev;
+	struct pmac_i2c_bus *bus;
 
 	DBG("wf_lm75: adapter %s detected\n", adapter->name);
 
-	if (strncmp(adapter->name, "smu-i2c-", 8) != 0)
-		return 0;
-	smu = of_find_node_by_type(NULL, "smu");
-	if (smu == NULL)
-		return 0;
-
-	/* Look for the bus in the device-tree */
-	bus_id = (u8)simple_strtoul(adapter->name + 8, NULL, 16);
-
-	DBG("wf_lm75: bus ID is %x\n", bus_id);
-
-	/* Look for sensors subdir */
-	for (bus = NULL;
-	     (bus = of_get_next_child(smu, bus)) != NULL;) {
-		u32 *reg;
-
-		if (strcmp(bus->name, "i2c"))
-			continue;
-		reg = (u32 *)get_property(bus, "reg", NULL);
-		if (reg == NULL)
-			continue;
-		if (bus_id == *reg)
-			break;
-	}
-	of_node_put(smu);
-	if (bus == NULL) {
-		printk(KERN_WARNING "windfarm: SMU i2c bus 0x%x not found"
-		       " in device-tree !\n", bus_id);
-		return 0;
-	}
+	bus = pmac_i2c_adapter_to_bus(adapter);
+	if (bus == NULL)
+		return -ENODEV;
+	busnode = pmac_i2c_get_bus_node(bus);
 
 	DBG("wf_lm75: bus found, looking for device...\n");
 
 	/* Now look for lm75(s) in there */
 	for (dev = NULL;
-	     (dev = of_get_next_child(bus, dev)) != NULL;) {
+	     (dev = of_get_next_child(busnode, dev)) != NULL;) {
 		const char *loc =
 			get_property(dev, "hwsensor-location", NULL);
 		u32 *reg = (u32 *)get_property(dev, "reg", NULL);
@@ -217,9 +186,6 @@ static int wf_lm75_attach(struct i2c_adapter *adapter)
 		else if (device_is_compatible(dev, "ds1775"))
 			wf_lm75_create(adapter, *reg, 1, loc);
 	}
-
-	of_node_put(bus);
-
 	return 0;
 }
 
-- 
cgit v1.1


From 5b9ca526917b7bc7d1da3beaccb2251a8f0b5fe2 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Sat, 7 Jan 2006 11:41:02 +1100
Subject: [PATCH] 3/5 powerpc: Add platform functions interpreter

This is the platform function interpreter itself along with the backends
for UniN/U3/U4, mac-io, GPIOs and i2c. It adds the ability to execute
those do-platform-* scripts in the device-tree (at least for most
devices for which a backend is provided). This should replace the clock
spreading hacks properly. It might also have an impact on all sort of
machines since some of the scripts marked "at init" will now be executed
on boot (or some other on sleep/wakeup), those will possibly do things
that the kernel didn't do at all, like setting some values into some i2c
devices (changing thermal sensor calibration or conversion rate) etc...
Thus regression testing is MUCH welcome. Also loook for errors in dmesg.
That's also why I've left rather verbose debugging enabled in this
version of the patch.

(I do expect some Windtunnel G4s to show some errors as they have an i2c
clock chip on the PMU bus that uses some primitives that the i2c backend
doesn't implement yet. I really need users that have one of those
machine to come back to me so we can get that done right, though the
errors themselves should be harmless, I suspect the machine might not
run at full speed).

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 drivers/macintosh/via-pmu.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

(limited to 'drivers/macintosh')

diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c
index aa481a8..6eb93e4 100644
--- a/drivers/macintosh/via-pmu.c
+++ b/drivers/macintosh/via-pmu.c
@@ -55,6 +55,8 @@
 #include <asm/sections.h>
 #include <asm/irq.h>
 #include <asm/pmac_feature.h>
+#include <asm/pmac_pfunc.h>
+#include <asm/pmac_low_i2c.h>
 #include <asm/uaccess.h>
 #include <asm/mmu_context.h>
 #include <asm/cputable.h>
@@ -2105,6 +2107,10 @@ pmac_suspend_devices(void)
 		return -EBUSY;
 	}
 
+	/* Call platform functions marked "on sleep" */
+	pmac_pfunc_i2c_suspend();
+	pmac_pfunc_base_suspend();
+
 	/* Stop preemption */
 	preempt_disable();
 
@@ -2175,6 +2181,10 @@ pmac_wakeup_devices(void)
 	mdelay(10);
 	preempt_enable();
 
+	/* Call platform functions marked "on wake" */
+	pmac_pfunc_base_resume();
+	pmac_pfunc_i2c_resume();
+
 	/* Resume devices */
 	device_resume();
 
-- 
cgit v1.1