From 901b74a3c4044a07c7149365aa9c4eaa6c71964b Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Thu, 7 Mar 2013 18:39:04 -0800 Subject: leds: renesas: set gpio_request_one() flags param correctly The gpio_request_one() flags parameter was set to: GPIOF_DIR_OUT | !!brightness GPIOF_DIR_OUT and GPIOF_DIR_IN are defined as below: GPIOF_DIR_OUT (0 << 0) GPIOF_DIR_IN (1 << 0) So, when '!!brightness' is 1, the gpio pin can be set as input, instead of output. To prevent this problem, GPIOF_OUT_INIT flags should be used when using gpio_request_one(). Signed-off-by: Jingoo Han Signed-off-by: Bryan Wu --- drivers/leds/leds-renesas-tpu.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/leds') diff --git a/drivers/leds/leds-renesas-tpu.c b/drivers/leds/leds-renesas-tpu.c index d3c2b7e..9483f1c 100644 --- a/drivers/leds/leds-renesas-tpu.c +++ b/drivers/leds/leds-renesas-tpu.c @@ -205,7 +205,8 @@ static void r_tpu_set_pin(struct r_tpu_priv *p, enum r_tpu_pin new_state, gpio_free(cfg->pin_gpio_fn); if (new_state == R_TPU_PIN_GPIO) - gpio_request_one(cfg->pin_gpio, GPIOF_DIR_OUT | !!brightness, + gpio_request_one(cfg->pin_gpio, !!brightness ? + GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW, cfg->name); if (new_state == R_TPU_PIN_GPIO_FN) -- cgit v1.1