From ded6a1a341cb38c4cfeb09d3d01ffe16b5c804b3 Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Sat, 20 Mar 2010 19:35:12 +0100 Subject: pcmcia: dev_node removal (drivers with updated printk call) As a second step, remove any usage of dev_node_t from drivers which only wrote to this typedef/struct, except one printk() which can easily be replaced by a dev_info()/dev_warn() call. CC: Harald Welte CC: linux-ide@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: netdev@vger.kernel.org CC: linux-usb@vger.kernel.org Acked-by: Karsten Keil Signed-off-by: Dominik Brodowski --- drivers/isdn/hardware/avm/avm_cs.c | 60 ++++---------------------------------- drivers/isdn/hisax/elsa_cs.c | 27 ++--------------- drivers/isdn/hisax/sedlbauer_cs.c | 37 ++--------------------- drivers/isdn/hisax/teles_cs.c | 37 ++--------------------- 4 files changed, 11 insertions(+), 150 deletions(-) (limited to 'drivers/isdn') diff --git a/drivers/isdn/hardware/avm/avm_cs.c b/drivers/isdn/hardware/avm/avm_cs.c index 0d485f6..8bbc452 100644 --- a/drivers/isdn/hardware/avm/avm_cs.c +++ b/drivers/isdn/hardware/avm/avm_cs.c @@ -61,31 +61,6 @@ static void avmcs_release(struct pcmcia_device *link); static void avmcs_detach(struct pcmcia_device *p_dev); -/* - A linked list of "instances" of the skeleton device. Each actual - PCMCIA card corresponds to one device instance, and is described - by one struct pcmcia_device structure (defined in ds.h). - - You may not want to use a linked list for this -- for example, the - memory card driver uses an array of struct pcmcia_device pointers, where minor - device numbers are used to derive the corresponding array index. -*/ - -/* - A driver needs to provide a dev_node_t structure for each device - on a card. In some cases, there is only one device per card (for - example, ethernet cards, modems). In other cases, there may be - many actual or logical devices (SCSI adapters, memory cards with - multiple partitions). The dev_node_t structures need to be kept - in a linked list starting at the 'dev' field of a struct pcmcia_device - structure. We allocate them in the card's private data structure, - because they generally can't be allocated dynamically. -*/ - -typedef struct local_info_t { - dev_node_t node; -} local_info_t; - /*====================================================================== avmcs_attach() creates an "instance" of the driver, allocating @@ -100,7 +75,6 @@ typedef struct local_info_t { static int avmcs_probe(struct pcmcia_device *p_dev) { - local_info_t *local; /* The io structure describes IO port mapping */ p_dev->io.NumPorts1 = 16; @@ -113,16 +87,7 @@ static int avmcs_probe(struct pcmcia_device *p_dev) p_dev->conf.ConfigIndex = 1; p_dev->conf.Present = PRESENT_OPTION; - /* Allocate space for private device-specific data */ - local = kzalloc(sizeof(local_info_t), GFP_KERNEL); - if (!local) - goto err; - p_dev->priv = local; - return avmcs_config(p_dev); - - err: - return -ENOMEM; } /* avmcs_attach */ /*====================================================================== @@ -137,7 +102,6 @@ static int avmcs_probe(struct pcmcia_device *p_dev) static void avmcs_detach(struct pcmcia_device *link) { avmcs_release(link); - kfree(link->priv); } /* avmcs_detach */ /*====================================================================== @@ -168,14 +132,11 @@ static int avmcs_configcheck(struct pcmcia_device *p_dev, static int avmcs_config(struct pcmcia_device *link) { - local_info_t *dev; int i = -1; char devname[128]; int cardtype; int (*addcard)(unsigned int port, unsigned irq); - dev = link->priv; - devname[0] = 0; if (link->prod_id[1]) strlcpy(devname, link->prod_id[1], sizeof(devname)); @@ -204,15 +165,11 @@ static int avmcs_config(struct pcmcia_device *link) } while (0); - /* At this point, the dev_node_t structure(s) should be - initialized and arranged in a linked list at link->dev. */ - if (devname[0]) { char *s = strrchr(devname, ' '); if (!s) s = devname; else s++; - strcpy(dev->node.dev_name, s); if (strcmp("M1", s) == 0) { cardtype = AVM_CARDTYPE_M1; } else if (strcmp("M2", s) == 0) { @@ -220,14 +177,8 @@ static int avmcs_config(struct pcmcia_device *link) } else { cardtype = AVM_CARDTYPE_B1; } - } else { - strcpy(dev->node.dev_name, "b1"); + } else cardtype = AVM_CARDTYPE_B1; - } - - dev->node.major = 64; - dev->node.minor = 0; - link->dev_node = &dev->node; /* If any step failed, release any partially configured state */ if (i != 0) { @@ -243,12 +194,11 @@ static int avmcs_config(struct pcmcia_device *link) case AVM_CARDTYPE_B1: addcard = b1pcmcia_addcard_b1; break; } if ((i = (*addcard)(link->io.BasePort1, link->irq)) < 0) { - printk(KERN_ERR "avm_cs: failed to add AVM-%s-Controller at i/o %#x, irq %d\n", - dev->node.dev_name, link->io.BasePort1, link->irq); - avmcs_release(link); - return -ENODEV; + dev_err(&link->dev, "avm_cs: failed to add AVM-Controller at i/o %#x, irq %d\n", + link->io.BasePort1, link->irq); + avmcs_release(link); + return -ENODEV; } - dev->node.minor = i; return 0; } /* avmcs_config */ diff --git a/drivers/isdn/hisax/elsa_cs.c b/drivers/isdn/hisax/elsa_cs.c index 8e170e4..218927e 100644 --- a/drivers/isdn/hisax/elsa_cs.c +++ b/drivers/isdn/hisax/elsa_cs.c @@ -87,24 +87,8 @@ static void elsa_cs_release(struct pcmcia_device *link); static void elsa_cs_detach(struct pcmcia_device *p_dev) __devexit; -/* - A driver needs to provide a dev_node_t structure for each device - on a card. In some cases, there is only one device per card (for - example, ethernet cards, modems). In other cases, there may be - many actual or logical devices (SCSI adapters, memory cards with - multiple partitions). The dev_node_t structures need to be kept - in a linked list starting at the 'dev' field of a struct pcmcia_device - structure. We allocate them in the card's private data structure, - because they generally shouldn't be allocated dynamically. - In this case, we also provide a flag to indicate if a device is - "stopped" due to a power management event, or card ejection. The - device IO routines can use a flag like this to throttle IO to a - card that is not ready to accept it. -*/ - typedef struct local_info_t { struct pcmcia_device *p_dev; - dev_node_t node; int busy; int cardnr; } local_info_t; @@ -226,16 +210,9 @@ static int __devinit elsa_cs_config(struct pcmcia_device *link) if (i != 0) goto failed; - /* At this point, the dev_node_t structure(s) should be - initialized and arranged in a linked list at link->dev. *//* */ - sprintf(dev->node.dev_name, "elsa"); - dev->node.major = dev->node.minor = 0x0; - - link->dev_node = &dev->node; - /* Finally, report what we've done */ - printk(KERN_INFO "%s: index 0x%02x: ", - dev->node.dev_name, link->conf.ConfigIndex); + dev_info(&link->dev, "index 0x%02x: ", + link->conf.ConfigIndex); if (link->conf.Attributes & CONF_ENABLE_IRQ) printk(", irq %d", link->irq); if (link->io.NumPorts1) diff --git a/drivers/isdn/hisax/sedlbauer_cs.c b/drivers/isdn/hisax/sedlbauer_cs.c index 7778385..1f4feaa 100644 --- a/drivers/isdn/hisax/sedlbauer_cs.c +++ b/drivers/isdn/hisax/sedlbauer_cs.c @@ -87,32 +87,8 @@ static void sedlbauer_release(struct pcmcia_device *link); static void sedlbauer_detach(struct pcmcia_device *p_dev) __devexit; -/* - You'll also need to prototype all the functions that will actually - be used to talk to your device. See 'memory_cs' for a good example - of a fully self-sufficient driver; the other drivers rely more or - less on other parts of the kernel. -*/ - -/* - A driver needs to provide a dev_node_t structure for each device - on a card. In some cases, there is only one device per card (for - example, ethernet cards, modems). In other cases, there may be - many actual or logical devices (SCSI adapters, memory cards with - multiple partitions). The dev_node_t structures need to be kept - in a linked list starting at the 'dev' field of a struct pcmcia_device - structure. We allocate them in the card's private data structure, - because they generally shouldn't be allocated dynamically. - - In this case, we also provide a flag to indicate if a device is - "stopped" due to a power management event, or card ejection. The - device IO routines can use a flag like this to throttle IO to a - card that is not ready to accept it. -*/ - typedef struct local_info_t { struct pcmcia_device *p_dev; - dev_node_t node; int stop; int cardnr; } local_info_t; @@ -279,7 +255,6 @@ static int sedlbauer_config_check(struct pcmcia_device *p_dev, static int __devinit sedlbauer_config(struct pcmcia_device *link) { - local_info_t *dev = link->priv; win_req_t *req; int ret; IsdnCard_t icard; @@ -315,17 +290,9 @@ static int __devinit sedlbauer_config(struct pcmcia_device *link) if (ret) goto failed; - /* - At this point, the dev_node_t structure(s) need to be - initialized and arranged in a linked list at link->dev. - */ - sprintf(dev->node.dev_name, "sedlbauer"); - dev->node.major = dev->node.minor = 0; - link->dev_node = &dev->node; - /* Finally, report what we've done */ - printk(KERN_INFO "%s: index 0x%02x:", - dev->node.dev_name, link->conf.ConfigIndex); + dev_info(&link->dev, "index 0x%02x:", + link->conf.ConfigIndex); if (link->conf.Vpp) printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10); if (link->conf.Attributes & CONF_ENABLE_IRQ) diff --git a/drivers/isdn/hisax/teles_cs.c b/drivers/isdn/hisax/teles_cs.c index 02dec13..5771955 100644 --- a/drivers/isdn/hisax/teles_cs.c +++ b/drivers/isdn/hisax/teles_cs.c @@ -68,34 +68,8 @@ static void teles_cs_release(struct pcmcia_device *link); static void teles_detach(struct pcmcia_device *p_dev) __devexit ; -/* - A linked list of "instances" of the teles_cs device. Each actual - PCMCIA card corresponds to one device instance, and is described - by one struct pcmcia_device structure (defined in ds.h). - - You may not want to use a linked list for this -- for example, the - memory card driver uses an array of struct pcmcia_device pointers, where minor - device numbers are used to derive the corresponding array index. -*/ - -/* - A driver needs to provide a dev_node_t structure for each device - on a card. In some cases, there is only one device per card (for - example, ethernet cards, modems). In other cases, there may be - many actual or logical devices (SCSI adapters, memory cards with - multiple partitions). The dev_node_t structures need to be kept - in a linked list starting at the 'dev' field of a struct pcmcia_device - structure. We allocate them in the card's private data structure, - because they generally shouldn't be allocated dynamically. - In this case, we also provide a flag to indicate if a device is - "stopped" due to a power management event, or card ejection. The - device IO routines can use a flag like this to throttle IO to a - card that is not ready to accept it. -*/ - typedef struct local_info_t { struct pcmcia_device *p_dev; - dev_node_t node; int busy; int cardnr; } local_info_t; @@ -216,16 +190,9 @@ static int __devinit teles_cs_config(struct pcmcia_device *link) if (i != 0) goto cs_failed; - /* At this point, the dev_node_t structure(s) should be - initialized and arranged in a linked list at link->dev. *//* */ - sprintf(dev->node.dev_name, "teles"); - dev->node.major = dev->node.minor = 0x0; - - link->dev_node = &dev->node; - /* Finally, report what we've done */ - printk(KERN_INFO "%s: index 0x%02x:", - dev->node.dev_name, link->conf.ConfigIndex); + dev_info(&link->dev, "index 0x%02x:", + link->conf.ConfigIndex); if (link->conf.Attributes & CONF_ENABLE_IRQ) printk(", irq %d", link->irq); if (link->io.NumPorts1) -- cgit v1.1