From 7c6d0ee14cb7a4cfad4864dc196256da5749bc0c Mon Sep 17 00:00:00 2001 From: David Brownell Date: Wed, 2 Apr 2008 00:43:01 -0400 Subject: Input: ads7846 - simplify support of external vREF (and ads7843) This updates the ads7846 driver to handle external vREF (required on boards using ads7843 chips) without module parameters, and also removes a needless variable with its associated bogus gcc warning. Signed-off-by: David Brownell Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/ads7846.c | 22 ++++++++++------------ 1 file changed, 10 insertions(+), 12 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c index 57a1c28..a571aa9 100644 --- a/drivers/input/touchscreen/ads7846.c +++ b/drivers/input/touchscreen/ads7846.c @@ -87,6 +87,7 @@ struct ads7846 { #endif u16 model; + u16 vref_mv; u16 vref_delay_usecs; u16 x_plate_ohms; u16 pressure_max; @@ -184,9 +185,6 @@ struct ads7846 { * The range is GND..vREF. The ads7843 and ads7835 must use external vREF; * ads7846 lets that pin be unconnected, to use internal vREF. */ -static unsigned vREF_mV; -module_param(vREF_mV, uint, 0); -MODULE_PARM_DESC(vREF_mV, "external vREF voltage, in milliVolts"); struct ser_req { u8 ref_on; @@ -213,7 +211,6 @@ static int ads7846_read12_ser(struct device *dev, unsigned command) struct ads7846 *ts = dev_get_drvdata(dev); struct ser_req *req = kzalloc(sizeof *req, GFP_KERNEL); int status; - int uninitialized_var(sample); int use_internal; if (!req) @@ -270,13 +267,13 @@ static int ads7846_read12_ser(struct device *dev, unsigned command) if (status == 0) { /* on-wire is a must-ignore bit, a BE12 value, then padding */ - sample = be16_to_cpu(req->sample); - sample = sample >> 3; - sample &= 0x0fff; + status = be16_to_cpu(req->sample); + status = status >> 3; + status &= 0x0fff; } kfree(req); - return status ? status : sample; + return status; } #if defined(CONFIG_HWMON) || defined(CONFIG_HWMON_MODULE) @@ -317,7 +314,7 @@ static inline unsigned vaux_adjust(struct ads7846 *ts, ssize_t v) unsigned retval = v; /* external resistors may scale vAUX into 0..vREF */ - retval *= vREF_mV; + retval *= ts->vref_mv; retval = retval >> 12; return retval; } @@ -375,14 +372,14 @@ static int ads784x_hwmon_register(struct spi_device *spi, struct ads7846 *ts) /* hwmon sensors need a reference voltage */ switch (ts->model) { case 7846: - if (!vREF_mV) { + if (!ts->vref_mv) { dev_dbg(&spi->dev, "assuming 2.5V internal vREF\n"); - vREF_mV = 2500; + ts->vref_mv = 2500; } break; case 7845: case 7843: - if (!vREF_mV) { + if (!ts->vref_mv) { dev_warn(&spi->dev, "external vREF for ADS%d not specified\n", ts->model); @@ -875,6 +872,7 @@ static int __devinit ads7846_probe(struct spi_device *spi) ts->spi = spi; ts->input = input_dev; + ts->vref_mv = pdata->vref_mv; hrtimer_init(&ts->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); ts->timer.function = ads7846_timer; -- cgit v1.1