From f2bc114b82ecbd32b3581bebdf40f1f2c4e9941b Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Thu, 3 Sep 2015 10:47:25 -0700 Subject: Input: cyttsp - remove unnecessary MODULE_ALIAS() The drivers have a I2C device ID table that is used to create the module aliases and also "cyttsp" and "cyttsp4" are not supported I2C device IDs so these module aliases are never used. Signed-off-by: Javier Martinez Canillas Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/cyttsp4_i2c.c | 1 - drivers/input/touchscreen/cyttsp_i2c.c | 1 - 2 files changed, 2 deletions(-) (limited to 'drivers/input/touchscreen') diff --git a/drivers/input/touchscreen/cyttsp4_i2c.c b/drivers/input/touchscreen/cyttsp4_i2c.c index 9a323dd..a9f95c7 100644 --- a/drivers/input/touchscreen/cyttsp4_i2c.c +++ b/drivers/input/touchscreen/cyttsp4_i2c.c @@ -86,4 +86,3 @@ module_i2c_driver(cyttsp4_i2c_driver); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Cypress TrueTouch(R) Standard Product (TTSP) I2C driver"); MODULE_AUTHOR("Cypress"); -MODULE_ALIAS("i2c:cyttsp4"); diff --git a/drivers/input/touchscreen/cyttsp_i2c.c b/drivers/input/touchscreen/cyttsp_i2c.c index 519e2de..eee51b3 100644 --- a/drivers/input/touchscreen/cyttsp_i2c.c +++ b/drivers/input/touchscreen/cyttsp_i2c.c @@ -86,4 +86,3 @@ module_i2c_driver(cyttsp_i2c_driver); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Cypress TrueTouch(R) Standard Product (TTSP) I2C driver"); MODULE_AUTHOR("Cypress"); -MODULE_ALIAS("i2c:cyttsp"); -- cgit v1.1 From 22c15e5e008297c90daa8657fea1a3f0e0675454 Mon Sep 17 00:00:00 2001 From: James Chen Date: Thu, 3 Sep 2015 22:12:38 -0700 Subject: Input: elants_i2c - extend the calibration timeout to 12 seconds The 23 inch device found in Chrome project buddy requires 9.2~10.5 seconds to complete calibration. Let's increase calibration timeout to 12 seconds to give the device enough time. Signed-off-by: James Chen Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/elants_i2c.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/input/touchscreen') diff --git a/drivers/input/touchscreen/elants_i2c.c b/drivers/input/touchscreen/elants_i2c.c index ddac134..17cc20e 100644 --- a/drivers/input/touchscreen/elants_i2c.c +++ b/drivers/input/touchscreen/elants_i2c.c @@ -102,7 +102,7 @@ #define ELAN_FW_PAGESIZE 132 /* calibration timeout definition */ -#define ELAN_CALI_TIMEOUT_MSEC 10000 +#define ELAN_CALI_TIMEOUT_MSEC 12000 #define ELAN_POWERON_DELAY_USEC 500 #define ELAN_RESET_DELAY_MSEC 20 -- cgit v1.1 From 48ead50c1dd8e5cdb7ead067558a834c1e895e6e Mon Sep 17 00:00:00 2001 From: Sanchayan Maity Date: Sat, 5 Sep 2015 10:32:09 -0700 Subject: Input: Add touchscreen support for Colibri VF50 The Colibri Vybrid VF50 module supports 4-wire touchscreens using FETs and ADC inputs. This driver uses the IIO consumer interface and relies on the vf610_adc driver based on the IIO framework. Signed-off-by: Sanchayan Maity Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/Kconfig | 12 + drivers/input/touchscreen/Makefile | 1 + drivers/input/touchscreen/colibri-vf50-ts.c | 386 ++++++++++++++++++++++++++++ 3 files changed, 399 insertions(+) create mode 100644 drivers/input/touchscreen/colibri-vf50-ts.c (limited to 'drivers/input/touchscreen') diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 059edeb..a6d7a4d 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -1040,4 +1040,16 @@ config TOUCHSCREEN_ZFORCE To compile this driver as a module, choose M here: the module will be called zforce_ts. +config TOUCHSCREEN_COLIBRI_VF50 + tristate "Toradex Colibri on board touchscreen driver" + depends on GPIOLIB && IIO && VF610_ADC + help + Say Y here if you have a Colibri VF50 and plan to use + the on-board provided 4-wire touchscreen driver. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called colibri_vf50_ts. + endif diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index c85aae2..fb27f7e 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -85,3 +85,4 @@ obj-$(CONFIG_TOUCHSCREEN_W90X900) += w90p910_ts.o obj-$(CONFIG_TOUCHSCREEN_SX8654) += sx8654.o obj-$(CONFIG_TOUCHSCREEN_TPS6507X) += tps6507x-ts.o obj-$(CONFIG_TOUCHSCREEN_ZFORCE) += zforce_ts.o +obj-$(CONFIG_TOUCHSCREEN_COLIBRI_VF50) += colibri-vf50-ts.o diff --git a/drivers/input/touchscreen/colibri-vf50-ts.c b/drivers/input/touchscreen/colibri-vf50-ts.c new file mode 100644 index 0000000..5d4903a --- /dev/null +++ b/drivers/input/touchscreen/colibri-vf50-ts.c @@ -0,0 +1,386 @@ +/* + * Toradex Colibri VF50 Touchscreen driver + * + * Copyright 2015 Toradex AG + * + * Originally authored by Stefan Agner for 3.0 kernel + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRIVER_NAME "colibri-vf50-ts" +#define DRV_VERSION "1.0" + +#define VF_ADC_MAX ((1 << 12) - 1) + +#define COLI_TOUCH_MIN_DELAY_US 1000 +#define COLI_TOUCH_MAX_DELAY_US 2000 +#define COLI_PULLUP_MIN_DELAY_US 10000 +#define COLI_PULLUP_MAX_DELAY_US 11000 +#define COLI_TOUCH_NO_OF_AVGS 5 +#define COLI_TOUCH_REQ_ADC_CHAN 4 + +struct vf50_touch_device { + struct platform_device *pdev; + struct input_dev *ts_input; + struct iio_channel *channels; + struct gpio_desc *gpio_xp; + struct gpio_desc *gpio_xm; + struct gpio_desc *gpio_yp; + struct gpio_desc *gpio_ym; + int pen_irq; + int min_pressure; + bool stop_touchscreen; +}; + +/* + * Enables given plates and measures touch parameters using ADC + */ +static int adc_ts_measure(struct iio_channel *channel, + struct gpio_desc *plate_p, struct gpio_desc *plate_m) +{ + int i, value = 0, val = 0; + int error; + + gpiod_set_value(plate_p, 1); + gpiod_set_value(plate_m, 1); + + usleep_range(COLI_TOUCH_MIN_DELAY_US, COLI_TOUCH_MAX_DELAY_US); + + for (i = 0; i < COLI_TOUCH_NO_OF_AVGS; i++) { + error = iio_read_channel_raw(channel, &val); + if (error < 0) { + value = error; + goto error_iio_read; + } + + value += val; + } + + value /= COLI_TOUCH_NO_OF_AVGS; + +error_iio_read: + gpiod_set_value(plate_p, 0); + gpiod_set_value(plate_m, 0); + + return value; +} + +/* + * Enable touch detection using falling edge detection on XM + */ +static void vf50_ts_enable_touch_detection(struct vf50_touch_device *vf50_ts) +{ + /* Enable plate YM (needs to be strong GND, high active) */ + gpiod_set_value(vf50_ts->gpio_ym, 1); + + /* + * Let the platform mux to idle state in order to enable + * Pull-Up on GPIO + */ + pinctrl_pm_select_idle_state(&vf50_ts->pdev->dev); + + /* Wait for the pull-up to be stable on high */ + usleep_range(COLI_PULLUP_MIN_DELAY_US, COLI_PULLUP_MAX_DELAY_US); +} + +/* + * ADC touch screen sampling bottom half irq handler + */ +static irqreturn_t vf50_ts_irq_bh(int irq, void *private) +{ + struct vf50_touch_device *vf50_ts = private; + struct device *dev = &vf50_ts->pdev->dev; + int val_x, val_y, val_z1, val_z2, val_p = 0; + bool discard_val_on_start = true; + + /* Disable the touch detection plates */ + gpiod_set_value(vf50_ts->gpio_ym, 0); + + /* Let the platform mux to default state in order to mux as ADC */ + pinctrl_pm_select_default_state(dev); + + while (!vf50_ts->stop_touchscreen) { + /* X-Direction */ + val_x = adc_ts_measure(&vf50_ts->channels[0], + vf50_ts->gpio_xp, vf50_ts->gpio_xm); + if (val_x < 0) + break; + + /* Y-Direction */ + val_y = adc_ts_measure(&vf50_ts->channels[1], + vf50_ts->gpio_yp, vf50_ts->gpio_ym); + if (val_y < 0) + break; + + /* + * Touch pressure + * Measure on XP/YM + */ + val_z1 = adc_ts_measure(&vf50_ts->channels[2], + vf50_ts->gpio_yp, vf50_ts->gpio_xm); + if (val_z1 < 0) + break; + val_z2 = adc_ts_measure(&vf50_ts->channels[3], + vf50_ts->gpio_yp, vf50_ts->gpio_xm); + if (val_z2 < 0) + break; + + /* Validate signal (avoid calculation using noise) */ + if (val_z1 > 64 && val_x > 64) { + /* + * Calculate resistance between the plates + * lower resistance means higher pressure + */ + int r_x = (1000 * val_x) / VF_ADC_MAX; + + val_p = (r_x * val_z2) / val_z1 - r_x; + + } else { + val_p = 2000; + } + + val_p = 2000 - val_p; + dev_dbg(dev, + "Measured values: x: %d, y: %d, z1: %d, z2: %d, p: %d\n", + val_x, val_y, val_z1, val_z2, val_p); + + /* + * If touch pressure is too low, stop measuring and reenable + * touch detection + */ + if (val_p < vf50_ts->min_pressure || val_p > 2000) + break; + + /* + * The pressure may not be enough for the first x and the + * second y measurement, but, the pressure is ok when the + * driver is doing the third and fourth measurement. To + * take care of this, we drop the first measurement always. + */ + if (discard_val_on_start) { + discard_val_on_start = false; + } else { + /* + * Report touch position and sleep for + * the next measurement. + */ + input_report_abs(vf50_ts->ts_input, + ABS_X, VF_ADC_MAX - val_x); + input_report_abs(vf50_ts->ts_input, + ABS_Y, VF_ADC_MAX - val_y); + input_report_abs(vf50_ts->ts_input, + ABS_PRESSURE, val_p); + input_report_key(vf50_ts->ts_input, BTN_TOUCH, 1); + input_sync(vf50_ts->ts_input); + } + + usleep_range(COLI_PULLUP_MIN_DELAY_US, + COLI_PULLUP_MAX_DELAY_US); + } + + /* Report no more touch, re-enable touch detection */ + input_report_abs(vf50_ts->ts_input, ABS_PRESSURE, 0); + input_report_key(vf50_ts->ts_input, BTN_TOUCH, 0); + input_sync(vf50_ts->ts_input); + + vf50_ts_enable_touch_detection(vf50_ts); + + return IRQ_HANDLED; +} + +static int vf50_ts_open(struct input_dev *dev_input) +{ + struct vf50_touch_device *touchdev = input_get_drvdata(dev_input); + struct device *dev = &touchdev->pdev->dev; + + dev_dbg(dev, "Input device %s opened, starting touch detection\n", + dev_input->name); + + touchdev->stop_touchscreen = false; + + /* Mux detection before request IRQ, wait for pull-up to settle */ + vf50_ts_enable_touch_detection(touchdev); + + return 0; +} + +static void vf50_ts_close(struct input_dev *dev_input) +{ + struct vf50_touch_device *touchdev = input_get_drvdata(dev_input); + struct device *dev = &touchdev->pdev->dev; + + touchdev->stop_touchscreen = true; + + /* Make sure IRQ is not running past close */ + mb(); + synchronize_irq(touchdev->pen_irq); + + gpiod_set_value(touchdev->gpio_ym, 0); + pinctrl_pm_select_default_state(dev); + + dev_dbg(dev, "Input device %s closed, disable touch detection\n", + dev_input->name); +} + +static int vf50_ts_get_gpiod(struct device *dev, struct gpio_desc **gpio_d, + const char *con_id, enum gpiod_flags flags) +{ + int error; + + *gpio_d = devm_gpiod_get(dev, con_id, flags); + if (IS_ERR(*gpio_d)) { + error = PTR_ERR(*gpio_d); + dev_err(dev, "Could not get gpio_%s %d\n", con_id, error); + return error; + } + + return 0; +} + +static void vf50_ts_channel_release(void *data) +{ + struct iio_channel *channels = data; + + iio_channel_release_all(channels); +} + +static int vf50_ts_probe(struct platform_device *pdev) +{ + struct input_dev *input; + struct iio_channel *channels; + struct device *dev = &pdev->dev; + struct vf50_touch_device *touchdev; + int num_adc_channels; + int error; + + channels = iio_channel_get_all(dev); + if (IS_ERR(channels)) + return PTR_ERR(channels); + + error = devm_add_action(dev, vf50_ts_channel_release, channels); + if (error) { + iio_channel_release_all(channels); + dev_err(dev, "Failed to register iio channel release action"); + return error; + } + + num_adc_channels = 0; + while (channels[num_adc_channels].indio_dev) + num_adc_channels++; + + if (num_adc_channels != COLI_TOUCH_REQ_ADC_CHAN) { + dev_err(dev, "Inadequate ADC channels specified\n"); + return -EINVAL; + } + + touchdev = devm_kzalloc(dev, sizeof(*touchdev), GFP_KERNEL); + if (!touchdev) + return -ENOMEM; + + touchdev->pdev = pdev; + touchdev->channels = channels; + + error = of_property_read_u32(dev->of_node, "vf50-ts-min-pressure", + &touchdev->min_pressure); + if (error) + return error; + + input = devm_input_allocate_device(dev); + if (!input) { + dev_err(dev, "Failed to allocate TS input device\n"); + return -ENOMEM; + } + + platform_set_drvdata(pdev, touchdev); + + input->name = DRIVER_NAME; + input->id.bustype = BUS_HOST; + input->dev.parent = dev; + input->open = vf50_ts_open; + input->close = vf50_ts_close; + + input_set_capability(input, EV_KEY, BTN_TOUCH); + input_set_abs_params(input, ABS_X, 0, VF_ADC_MAX, 0, 0); + input_set_abs_params(input, ABS_Y, 0, VF_ADC_MAX, 0, 0); + input_set_abs_params(input, ABS_PRESSURE, 0, VF_ADC_MAX, 0, 0); + + touchdev->ts_input = input; + input_set_drvdata(input, touchdev); + + error = input_register_device(input); + if (error) { + dev_err(dev, "Failed to register input device\n"); + return error; + } + + error = vf50_ts_get_gpiod(dev, &touchdev->gpio_xp, "xp", GPIOD_OUT_LOW); + if (error) + return error; + + error = vf50_ts_get_gpiod(dev, &touchdev->gpio_xm, + "xm", GPIOD_OUT_LOW); + if (error) + return error; + + error = vf50_ts_get_gpiod(dev, &touchdev->gpio_yp, "yp", GPIOD_OUT_LOW); + if (error) + return error; + + error = vf50_ts_get_gpiod(dev, &touchdev->gpio_ym, "ym", GPIOD_OUT_LOW); + if (error) + return error; + + touchdev->pen_irq = platform_get_irq(pdev, 0); + if (touchdev->pen_irq < 0) + return touchdev->pen_irq; + + error = devm_request_threaded_irq(dev, touchdev->pen_irq, + NULL, vf50_ts_irq_bh, IRQF_ONESHOT, + "vf50 touch", touchdev); + if (error) { + dev_err(dev, "Failed to request IRQ %d: %d\n", + touchdev->pen_irq, error); + return error; + } + + return 0; +} + +static const struct of_device_id vf50_touch_of_match[] = { + { .compatible = "toradex,vf50-touchscreen", }, + { } +}; +MODULE_DEVICE_TABLE(of, vf50_touch_of_match); + +static struct platform_driver vf50_touch_driver = { + .driver = { + .name = "toradex,vf50_touchctrl", + .of_match_table = vf50_touch_of_match, + }, + .probe = vf50_ts_probe, +}; +module_platform_driver(vf50_touch_driver); + +MODULE_AUTHOR("Sanchayan Maity"); +MODULE_DESCRIPTION("Colibri VF50 Touchscreen driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); -- cgit v1.1 From 9a436d524d3533cd15ed5a189d2237ff1e4e5343 Mon Sep 17 00:00:00 2001 From: Haibo Chen Date: Sat, 5 Sep 2015 11:31:21 -0700 Subject: Input: touchscreen - add imx6ul_tsc driver support Freescale i.MX6UL contains a internal touchscreen controller, this patch add a driver to support this controller. Signed-off-by: Haibo Chen Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/Kconfig | 12 + drivers/input/touchscreen/Makefile | 1 + drivers/input/touchscreen/imx6ul_tsc.c | 523 +++++++++++++++++++++++++++++++++ 3 files changed, 536 insertions(+) create mode 100644 drivers/input/touchscreen/imx6ul_tsc.c (limited to 'drivers/input/touchscreen') diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index a6d7a4d..600dccef 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -479,6 +479,18 @@ config TOUCHSCREEN_MTOUCH To compile this driver as a module, choose M here: the module will be called mtouch. +config TOUCHSCREEN_IMX6UL_TSC + tristate "Freescale i.MX6UL touchscreen controller" + depends on (OF && GPIOLIB) || COMPILE_TEST + help + Say Y here if you have a Freescale i.MX6UL, and want to + use the internal touchscreen controller. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called imx6ul_tsc. + config TOUCHSCREEN_INEXIO tristate "iNexio serial touchscreens" select SERIO diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index fb27f7e..1b79cc0 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -38,6 +38,7 @@ obj-$(CONFIG_TOUCHSCREEN_EGALAX) += egalax_ts.o obj-$(CONFIG_TOUCHSCREEN_FUJITSU) += fujitsu_ts.o obj-$(CONFIG_TOUCHSCREEN_GOODIX) += goodix.o obj-$(CONFIG_TOUCHSCREEN_ILI210X) += ili210x.o +obj-$(CONFIG_TOUCHSCREEN_IMX6UL_TSC) += imx6ul_tsc.o obj-$(CONFIG_TOUCHSCREEN_INEXIO) += inexio.o obj-$(CONFIG_TOUCHSCREEN_INTEL_MID) += intel-mid-touch.o obj-$(CONFIG_TOUCHSCREEN_IPROC) += bcm_iproc_tsc.o diff --git a/drivers/input/touchscreen/imx6ul_tsc.c b/drivers/input/touchscreen/imx6ul_tsc.c new file mode 100644 index 0000000..ff0b758 --- /dev/null +++ b/drivers/input/touchscreen/imx6ul_tsc.c @@ -0,0 +1,523 @@ +/* + * Freescale i.MX6UL touchscreen controller driver + * + * Copyright (C) 2015 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* ADC configuration registers field define */ +#define ADC_AIEN (0x1 << 7) +#define ADC_CONV_DISABLE 0x1F +#define ADC_CAL (0x1 << 7) +#define ADC_CALF 0x2 +#define ADC_12BIT_MODE (0x2 << 2) +#define ADC_IPG_CLK 0x00 +#define ADC_CLK_DIV_8 (0x03 << 5) +#define ADC_SHORT_SAMPLE_MODE (0x0 << 4) +#define ADC_HARDWARE_TRIGGER (0x1 << 13) +#define SELECT_CHANNEL_4 0x04 +#define SELECT_CHANNEL_1 0x01 +#define DISABLE_CONVERSION_INT (0x0 << 7) + +/* ADC registers */ +#define REG_ADC_HC0 0x00 +#define REG_ADC_HC1 0x04 +#define REG_ADC_HC2 0x08 +#define REG_ADC_HC3 0x0C +#define REG_ADC_HC4 0x10 +#define REG_ADC_HS 0x14 +#define REG_ADC_R0 0x18 +#define REG_ADC_CFG 0x2C +#define REG_ADC_GC 0x30 +#define REG_ADC_GS 0x34 + +#define ADC_TIMEOUT msecs_to_jiffies(100) + +/* TSC registers */ +#define REG_TSC_BASIC_SETING 0x00 +#define REG_TSC_PRE_CHARGE_TIME 0x10 +#define REG_TSC_FLOW_CONTROL 0x20 +#define REG_TSC_MEASURE_VALUE 0x30 +#define REG_TSC_INT_EN 0x40 +#define REG_TSC_INT_SIG_EN 0x50 +#define REG_TSC_INT_STATUS 0x60 +#define REG_TSC_DEBUG_MODE 0x70 +#define REG_TSC_DEBUG_MODE2 0x80 + +/* TSC configuration registers field define */ +#define DETECT_4_WIRE_MODE (0x0 << 4) +#define AUTO_MEASURE 0x1 +#define MEASURE_SIGNAL 0x1 +#define DETECT_SIGNAL (0x1 << 4) +#define VALID_SIGNAL (0x1 << 8) +#define MEASURE_INT_EN 0x1 +#define MEASURE_SIG_EN 0x1 +#define VALID_SIG_EN (0x1 << 8) +#define DE_GLITCH_2 (0x2 << 29) +#define START_SENSE (0x1 << 12) +#define TSC_DISABLE (0x1 << 16) +#define DETECT_MODE 0x2 + +struct imx6ul_tsc { + struct device *dev; + struct input_dev *input; + void __iomem *tsc_regs; + void __iomem *adc_regs; + struct clk *tsc_clk; + struct clk *adc_clk; + struct gpio_desc *xnur_gpio; + + int measure_delay_time; + int pre_charge_time; + + struct completion completion; +}; + +/* + * TSC module need ADC to get the measure value. So + * before config TSC, we should initialize ADC module. + */ +static void imx6ul_adc_init(struct imx6ul_tsc *tsc) +{ + int adc_hc = 0; + int adc_gc; + int adc_gs; + int adc_cfg; + int timeout; + + reinit_completion(&tsc->completion); + + adc_cfg = readl(tsc->adc_regs + REG_ADC_CFG); + adc_cfg |= ADC_12BIT_MODE | ADC_IPG_CLK; + adc_cfg |= ADC_CLK_DIV_8 | ADC_SHORT_SAMPLE_MODE; + adc_cfg &= ~ADC_HARDWARE_TRIGGER; + writel(adc_cfg, tsc->adc_regs + REG_ADC_CFG); + + /* enable calibration interrupt */ + adc_hc |= ADC_AIEN; + adc_hc |= ADC_CONV_DISABLE; + writel(adc_hc, tsc->adc_regs + REG_ADC_HC0); + + /* start ADC calibration */ + adc_gc = readl(tsc->adc_regs + REG_ADC_GC); + adc_gc |= ADC_CAL; + writel(adc_gc, tsc->adc_regs + REG_ADC_GC); + + timeout = wait_for_completion_timeout + (&tsc->completion, ADC_TIMEOUT); + if (timeout == 0) + dev_err(tsc->dev, "Timeout for adc calibration\n"); + + adc_gs = readl(tsc->adc_regs + REG_ADC_GS); + if (adc_gs & ADC_CALF) + dev_err(tsc->dev, "ADC calibration failed\n"); + + /* TSC need the ADC work in hardware trigger */ + adc_cfg = readl(tsc->adc_regs + REG_ADC_CFG); + adc_cfg |= ADC_HARDWARE_TRIGGER; + writel(adc_cfg, tsc->adc_regs + REG_ADC_CFG); +} + +/* + * This is a TSC workaround. Currently TSC misconnect two + * ADC channels, this function remap channel configure for + * hardware trigger. + */ +static void imx6ul_tsc_channel_config(struct imx6ul_tsc *tsc) +{ + int adc_hc0, adc_hc1, adc_hc2, adc_hc3, adc_hc4; + + adc_hc0 = DISABLE_CONVERSION_INT; + writel(adc_hc0, tsc->adc_regs + REG_ADC_HC0); + + adc_hc1 = DISABLE_CONVERSION_INT | SELECT_CHANNEL_4; + writel(adc_hc1, tsc->adc_regs + REG_ADC_HC1); + + adc_hc2 = DISABLE_CONVERSION_INT; + writel(adc_hc2, tsc->adc_regs + REG_ADC_HC2); + + adc_hc3 = DISABLE_CONVERSION_INT | SELECT_CHANNEL_1; + writel(adc_hc3, tsc->adc_regs + REG_ADC_HC3); + + adc_hc4 = DISABLE_CONVERSION_INT; + writel(adc_hc4, tsc->adc_regs + REG_ADC_HC4); +} + +/* + * TSC setting, confige the pre-charge time and measure delay time. + * different touch screen may need different pre-charge time and + * measure delay time. + */ +static void imx6ul_tsc_set(struct imx6ul_tsc *tsc) +{ + int basic_setting = 0; + int start; + + basic_setting |= tsc->measure_delay_time << 8; + basic_setting |= DETECT_4_WIRE_MODE | AUTO_MEASURE; + writel(basic_setting, tsc->tsc_regs + REG_TSC_BASIC_SETING); + + writel(DE_GLITCH_2, tsc->tsc_regs + REG_TSC_DEBUG_MODE2); + + writel(tsc->pre_charge_time, tsc->tsc_regs + REG_TSC_PRE_CHARGE_TIME); + writel(MEASURE_INT_EN, tsc->tsc_regs + REG_TSC_INT_EN); + writel(MEASURE_SIG_EN | VALID_SIG_EN, + tsc->tsc_regs + REG_TSC_INT_SIG_EN); + + /* start sense detection */ + start = readl(tsc->tsc_regs + REG_TSC_FLOW_CONTROL); + start |= START_SENSE; + start &= ~TSC_DISABLE; + writel(start, tsc->tsc_regs + REG_TSC_FLOW_CONTROL); +} + +static void imx6ul_tsc_init(struct imx6ul_tsc *tsc) +{ + imx6ul_adc_init(tsc); + imx6ul_tsc_channel_config(tsc); + imx6ul_tsc_set(tsc); +} + +static void imx6ul_tsc_disable(struct imx6ul_tsc *tsc) +{ + int tsc_flow; + int adc_cfg; + + /* TSC controller enters to idle status */ + tsc_flow = readl(tsc->tsc_regs + REG_TSC_FLOW_CONTROL); + tsc_flow |= TSC_DISABLE; + writel(tsc_flow, tsc->tsc_regs + REG_TSC_FLOW_CONTROL); + + /* ADC controller enters to stop mode */ + adc_cfg = readl(tsc->adc_regs + REG_ADC_HC0); + adc_cfg |= ADC_CONV_DISABLE; + writel(adc_cfg, tsc->adc_regs + REG_ADC_HC0); +} + +/* Delay some time (max 2ms), wait the pre-charge done. */ +static bool tsc_wait_detect_mode(struct imx6ul_tsc *tsc) +{ + unsigned long timeout = jiffies + msecs_to_jiffies(2); + int state_machine; + int debug_mode2; + + do { + if (time_after(jiffies, timeout)) + return false; + + usleep_range(200, 400); + debug_mode2 = readl(tsc->tsc_regs + REG_TSC_DEBUG_MODE2); + state_machine = (debug_mode2 >> 20) & 0x7; + } while (state_machine != DETECT_MODE); + + usleep_range(200, 400); + return true; +} + +static irqreturn_t tsc_irq_fn(int irq, void *dev_id) +{ + struct imx6ul_tsc *tsc = dev_id; + int status; + int value; + int x, y; + int start; + + status = readl(tsc->tsc_regs + REG_TSC_INT_STATUS); + + /* write 1 to clear the bit measure-signal */ + writel(MEASURE_SIGNAL | DETECT_SIGNAL, + tsc->tsc_regs + REG_TSC_INT_STATUS); + + /* It's a HW self-clean bit. Set this bit and start sense detection */ + start = readl(tsc->tsc_regs + REG_TSC_FLOW_CONTROL); + start |= START_SENSE; + writel(start, tsc->tsc_regs + REG_TSC_FLOW_CONTROL); + + if (status & MEASURE_SIGNAL) { + value = readl(tsc->tsc_regs + REG_TSC_MEASURE_VALUE); + x = (value >> 16) & 0x0fff; + y = value & 0x0fff; + + /* + * In detect mode, we can get the xnur gpio value, + * otherwise assume contact is stiull active. + */ + if (!tsc_wait_detect_mode(tsc) || + gpiod_get_value_cansleep(tsc->xnur_gpio)) { + input_report_key(tsc->input, BTN_TOUCH, 1); + input_report_abs(tsc->input, ABS_X, x); + input_report_abs(tsc->input, ABS_Y, y); + } else { + input_report_key(tsc->input, BTN_TOUCH, 0); + } + + input_sync(tsc->input); + } + + return IRQ_HANDLED; +} + +static irqreturn_t adc_irq_fn(int irq, void *dev_id) +{ + struct imx6ul_tsc *tsc = dev_id; + int coco; + int value; + + coco = readl(tsc->adc_regs + REG_ADC_HS); + if (coco & 0x01) { + value = readl(tsc->adc_regs + REG_ADC_R0); + complete(&tsc->completion); + } + + return IRQ_HANDLED; +} + +static int imx6ul_tsc_open(struct input_dev *input_dev) +{ + struct imx6ul_tsc *tsc = input_get_drvdata(input_dev); + int err; + + err = clk_prepare_enable(tsc->adc_clk); + if (err) { + dev_err(tsc->dev, + "Could not prepare or enable the adc clock: %d\n", + err); + return err; + } + + err = clk_prepare_enable(tsc->tsc_clk); + if (err) { + dev_err(tsc->dev, + "Could not prepare or enable the tsc clock: %d\n", + err); + clk_disable_unprepare(tsc->adc_clk); + return err; + } + + imx6ul_tsc_init(tsc); + + return 0; +} + +static void imx6ul_tsc_close(struct input_dev *input_dev) +{ + struct imx6ul_tsc *tsc = input_get_drvdata(input_dev); + + imx6ul_tsc_disable(tsc); + + clk_disable_unprepare(tsc->tsc_clk); + clk_disable_unprepare(tsc->adc_clk); +} + +static int imx6ul_tsc_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct imx6ul_tsc *tsc; + struct input_dev *input_dev; + struct resource *tsc_mem; + struct resource *adc_mem; + int err; + int tsc_irq; + int adc_irq; + + tsc = devm_kzalloc(&pdev->dev, sizeof(struct imx6ul_tsc), GFP_KERNEL); + if (!tsc) + return -ENOMEM; + + input_dev = devm_input_allocate_device(&pdev->dev); + if (!input_dev) + return -ENOMEM; + + input_dev->name = "iMX6UL TouchScreen Controller"; + input_dev->id.bustype = BUS_HOST; + + input_dev->open = imx6ul_tsc_open; + input_dev->close = imx6ul_tsc_close; + + input_set_capability(input_dev, EV_KEY, BTN_TOUCH); + input_set_abs_params(input_dev, ABS_X, 0, 0xFFF, 0, 0); + input_set_abs_params(input_dev, ABS_Y, 0, 0xFFF, 0, 0); + + input_set_drvdata(input_dev, tsc); + + tsc->dev = &pdev->dev; + tsc->input = input_dev; + init_completion(&tsc->completion); + + tsc->xnur_gpio = devm_gpiod_get(&pdev->dev, "xnur", GPIOD_IN); + if (IS_ERR(tsc->xnur_gpio)) { + err = PTR_ERR(tsc->xnur_gpio); + dev_err(&pdev->dev, + "failed to request GPIO tsc_X- (xnur): %d\n", err); + return err; + } + + tsc_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + tsc->tsc_regs = devm_ioremap_resource(&pdev->dev, tsc_mem); + if (IS_ERR(tsc->tsc_regs)) { + err = PTR_ERR(tsc->tsc_regs); + dev_err(&pdev->dev, "failed to remap tsc memory: %d\n", err); + return err; + } + + adc_mem = platform_get_resource(pdev, IORESOURCE_MEM, 1); + tsc->adc_regs = devm_ioremap_resource(&pdev->dev, adc_mem); + if (IS_ERR(tsc->adc_regs)) { + err = PTR_ERR(tsc->adc_regs); + dev_err(&pdev->dev, "failed to remap adc memory: %d\n", err); + return err; + } + + tsc->tsc_clk = devm_clk_get(&pdev->dev, "tsc"); + if (IS_ERR(tsc->tsc_clk)) { + err = PTR_ERR(tsc->tsc_clk); + dev_err(&pdev->dev, "failed getting tsc clock: %d\n", err); + return err; + } + + tsc->adc_clk = devm_clk_get(&pdev->dev, "adc"); + if (IS_ERR(tsc->adc_clk)) { + err = PTR_ERR(tsc->adc_clk); + dev_err(&pdev->dev, "failed getting adc clock: %d\n", err); + return err; + } + + tsc_irq = platform_get_irq(pdev, 0); + if (tsc_irq < 0) { + dev_err(&pdev->dev, "no tsc irq resource?\n"); + return tsc_irq; + } + + adc_irq = platform_get_irq(pdev, 1); + if (adc_irq <= 0) { + dev_err(&pdev->dev, "no adc irq resource?\n"); + return adc_irq; + } + + err = devm_request_threaded_irq(tsc->dev, tsc_irq, + NULL, tsc_irq_fn, IRQF_ONESHOT, + dev_name(&pdev->dev), tsc); + if (err) { + dev_err(&pdev->dev, + "failed requesting tsc irq %d: %d\n", + tsc_irq, err); + return err; + } + + err = devm_request_irq(tsc->dev, adc_irq, adc_irq_fn, 0, + dev_name(&pdev->dev), tsc); + if (err) { + dev_err(&pdev->dev, + "failed requesting adc irq %d: %d\n", + adc_irq, err); + return err; + } + + err = of_property_read_u32(np, "measure-delay-time", + &tsc->measure_delay_time); + if (err) + tsc->measure_delay_time = 0xffff; + + err = of_property_read_u32(np, "pre-charge-time", + &tsc->pre_charge_time); + if (err) + tsc->pre_charge_time = 0xfff; + + err = input_register_device(tsc->input); + if (err) { + dev_err(&pdev->dev, + "failed to register input device: %d\n", err); + return err; + } + + platform_set_drvdata(pdev, tsc); + return 0; +} + +static int __maybe_unused imx6ul_tsc_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct imx6ul_tsc *tsc = platform_get_drvdata(pdev); + struct input_dev *input_dev = tsc->input; + + mutex_lock(&input_dev->mutex); + + if (input_dev->users) { + imx6ul_tsc_disable(tsc); + + clk_disable_unprepare(tsc->tsc_clk); + clk_disable_unprepare(tsc->adc_clk); + } + + mutex_unlock(&input_dev->mutex); + + return 0; +} + +static int __maybe_unused imx6ul_tsc_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct imx6ul_tsc *tsc = platform_get_drvdata(pdev); + struct input_dev *input_dev = tsc->input; + int retval = 0; + + mutex_lock(&input_dev->mutex); + + if (input_dev->users) { + retval = clk_prepare_enable(tsc->adc_clk); + if (retval) + goto out; + + retval = clk_prepare_enable(tsc->tsc_clk); + if (retval) { + clk_disable_unprepare(tsc->adc_clk); + goto out; + } + + imx6ul_tsc_init(tsc); + } + +out: + mutex_unlock(&input_dev->mutex); + return retval; +} + +static SIMPLE_DEV_PM_OPS(imx6ul_tsc_pm_ops, + imx6ul_tsc_suspend, imx6ul_tsc_resume); + +static const struct of_device_id imx6ul_tsc_match[] = { + { .compatible = "fsl,imx6ul-tsc", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, imx6ul_tsc_match); + +static struct platform_driver imx6ul_tsc_driver = { + .driver = { + .name = "imx6ul-tsc", + .of_match_table = imx6ul_tsc_match, + .pm = &imx6ul_tsc_pm_ops, + }, + .probe = imx6ul_tsc_probe, +}; +module_platform_driver(imx6ul_tsc_driver); + +MODULE_AUTHOR("Haibo Chen "); +MODULE_DESCRIPTION("Freescale i.MX6UL Touchscreen controller driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.1