From 70dddeee8945a0e62525a278ae7b91778f82f765 Mon Sep 17 00:00:00 2001 From: Octavian Purdila Date: Mon, 2 Mar 2015 21:03:05 +0200 Subject: iio: fix drivers that check buffer->scan_mask If the in-kernel push interface is used we may have a different masks on the device buffer and the kernel buffer and in this case the device should generate data for the reunion of the buffers, which is available at indio_dev->active_scan_mask. Compiled tested only except for bmc150-accel which was tested at runtime with the hardware. Signed-off-by: Octavian Purdila Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/accel/bma180.c | 2 +- drivers/iio/accel/bmc150-accel.c | 2 +- drivers/iio/accel/kxcjk-1013.c | 2 +- drivers/iio/adc/at91_adc.c | 5 ++--- drivers/iio/adc/ti_am335x_adc.c | 3 +-- drivers/iio/gyro/bmg160.c | 2 +- drivers/iio/imu/kmx61.c | 2 +- drivers/iio/proximity/sx9500.c | 2 +- 8 files changed, 9 insertions(+), 11 deletions(-) (limited to 'drivers/iio') diff --git a/drivers/iio/accel/bma180.c b/drivers/iio/accel/bma180.c index 1096da3..75c6d21 100644 --- a/drivers/iio/accel/bma180.c +++ b/drivers/iio/accel/bma180.c @@ -659,7 +659,7 @@ static irqreturn_t bma180_trigger_handler(int irq, void *p) mutex_lock(&data->mutex); - for_each_set_bit(bit, indio_dev->buffer->scan_mask, + for_each_set_bit(bit, indio_dev->active_scan_mask, indio_dev->masklength) { ret = bma180_get_data_reg(data, bit); if (ret < 0) { diff --git a/drivers/iio/accel/bmc150-accel.c b/drivers/iio/accel/bmc150-accel.c index 066d0c0..7d1383d 100644 --- a/drivers/iio/accel/bmc150-accel.c +++ b/drivers/iio/accel/bmc150-accel.c @@ -986,7 +986,7 @@ static irqreturn_t bmc150_accel_trigger_handler(int irq, void *p) int bit, ret, i = 0; mutex_lock(&data->mutex); - for_each_set_bit(bit, indio_dev->buffer->scan_mask, + for_each_set_bit(bit, indio_dev->active_scan_mask, indio_dev->masklength) { ret = i2c_smbus_read_word_data(data->client, BMC150_ACCEL_AXIS_TO_REG(bit)); diff --git a/drivers/iio/accel/kxcjk-1013.c b/drivers/iio/accel/kxcjk-1013.c index 567de26..1a63795 100644 --- a/drivers/iio/accel/kxcjk-1013.c +++ b/drivers/iio/accel/kxcjk-1013.c @@ -956,7 +956,7 @@ static irqreturn_t kxcjk1013_trigger_handler(int irq, void *p) mutex_lock(&data->mutex); - for_each_set_bit(bit, indio_dev->buffer->scan_mask, + for_each_set_bit(bit, indio_dev->active_scan_mask, indio_dev->masklength) { ret = kxcjk1013_get_acc_reg(data, bit); if (ret < 0) { diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c index ff61ae5..8a0eb4a 100644 --- a/drivers/iio/adc/at91_adc.c +++ b/drivers/iio/adc/at91_adc.c @@ -544,7 +544,6 @@ static int at91_adc_configure_trigger(struct iio_trigger *trig, bool state) { struct iio_dev *idev = iio_trigger_get_drvdata(trig); struct at91_adc_state *st = iio_priv(idev); - struct iio_buffer *buffer = idev->buffer; struct at91_adc_reg_desc *reg = st->registers; u32 status = at91_adc_readl(st, reg->trigger_register); int value; @@ -564,7 +563,7 @@ static int at91_adc_configure_trigger(struct iio_trigger *trig, bool state) at91_adc_writel(st, reg->trigger_register, status | value); - for_each_set_bit(bit, buffer->scan_mask, + for_each_set_bit(bit, idev->active_scan_mask, st->num_channels) { struct iio_chan_spec const *chan = idev->channels + bit; at91_adc_writel(st, AT91_ADC_CHER, @@ -579,7 +578,7 @@ static int at91_adc_configure_trigger(struct iio_trigger *trig, bool state) at91_adc_writel(st, reg->trigger_register, status & ~value); - for_each_set_bit(bit, buffer->scan_mask, + for_each_set_bit(bit, idev->active_scan_mask, st->num_channels) { struct iio_chan_spec const *chan = idev->channels + bit; at91_adc_writel(st, AT91_ADC_CHDR, diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c index 2e5cc44..a0e7161 100644 --- a/drivers/iio/adc/ti_am335x_adc.c +++ b/drivers/iio/adc/ti_am335x_adc.c @@ -188,12 +188,11 @@ static int tiadc_buffer_preenable(struct iio_dev *indio_dev) static int tiadc_buffer_postenable(struct iio_dev *indio_dev) { struct tiadc_device *adc_dev = iio_priv(indio_dev); - struct iio_buffer *buffer = indio_dev->buffer; unsigned int enb = 0; u8 bit; tiadc_step_config(indio_dev); - for_each_set_bit(bit, buffer->scan_mask, adc_dev->channels) + for_each_set_bit(bit, indio_dev->active_scan_mask, adc_dev->channels) enb |= (get_adc_step_bit(adc_dev, bit) << 1); adc_dev->buffer_en_ch_steps = enb; diff --git a/drivers/iio/gyro/bmg160.c b/drivers/iio/gyro/bmg160.c index 60451b3..ccf3ea7 100644 --- a/drivers/iio/gyro/bmg160.c +++ b/drivers/iio/gyro/bmg160.c @@ -822,7 +822,7 @@ static irqreturn_t bmg160_trigger_handler(int irq, void *p) int bit, ret, i = 0; mutex_lock(&data->mutex); - for_each_set_bit(bit, indio_dev->buffer->scan_mask, + for_each_set_bit(bit, indio_dev->active_scan_mask, indio_dev->masklength) { ret = i2c_smbus_read_word_data(data->client, BMG160_AXIS_TO_REG(bit)); diff --git a/drivers/iio/imu/kmx61.c b/drivers/iio/imu/kmx61.c index 5cc3692..b3a3637 100644 --- a/drivers/iio/imu/kmx61.c +++ b/drivers/iio/imu/kmx61.c @@ -1227,7 +1227,7 @@ static irqreturn_t kmx61_trigger_handler(int irq, void *p) base = KMX61_MAG_XOUT_L; mutex_lock(&data->lock); - for_each_set_bit(bit, indio_dev->buffer->scan_mask, + for_each_set_bit(bit, indio_dev->active_scan_mask, indio_dev->masklength) { ret = kmx61_read_measurement(data, base, bit); if (ret < 0) { diff --git a/drivers/iio/proximity/sx9500.c b/drivers/iio/proximity/sx9500.c index 74dff4e..89fca3a 100644 --- a/drivers/iio/proximity/sx9500.c +++ b/drivers/iio/proximity/sx9500.c @@ -494,7 +494,7 @@ static irqreturn_t sx9500_trigger_handler(int irq, void *private) mutex_lock(&data->mutex); - for_each_set_bit(bit, indio_dev->buffer->scan_mask, + for_each_set_bit(bit, indio_dev->active_scan_mask, indio_dev->masklength) { ret = sx9500_read_proximity(data, &indio_dev->channels[bit], &val); -- cgit v1.1 From 0ba8da961bd868c67a8dae3dbbee145514515e9c Mon Sep 17 00:00:00 2001 From: Sathyanarayanan Kuppuswamy Date: Tue, 3 Mar 2015 18:17:56 +0200 Subject: iio: bmc150: change sampling frequency Currently driver reports device bandwidth list as available sampling frequency. But sampling frequency is actually twice the device bandwidth. This patch fixes this issue. Signed-off-by: Sathyanarayanan Kuppuswamy Signed-off-by: Octavian Purdila Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/accel/bmc150-accel.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'drivers/iio') diff --git a/drivers/iio/accel/bmc150-accel.c b/drivers/iio/accel/bmc150-accel.c index 7d1383d..75567fd 100644 --- a/drivers/iio/accel/bmc150-accel.c +++ b/drivers/iio/accel/bmc150-accel.c @@ -168,14 +168,14 @@ static const struct { int val; int val2; u8 bw_bits; -} bmc150_accel_samp_freq_table[] = { {7, 810000, 0x08}, - {15, 630000, 0x09}, - {31, 250000, 0x0A}, - {62, 500000, 0x0B}, - {125, 0, 0x0C}, - {250, 0, 0x0D}, - {500, 0, 0x0E}, - {1000, 0, 0x0F} }; +} bmc150_accel_samp_freq_table[] = { {15, 620000, 0x08}, + {31, 260000, 0x09}, + {62, 500000, 0x0A}, + {125, 0, 0x0B}, + {250, 0, 0x0C}, + {500, 0, 0x0D}, + {1000, 0, 0x0E}, + {2000, 0, 0x0F} }; static const struct { int bw_bits; @@ -840,7 +840,7 @@ static int bmc150_accel_validate_trigger(struct iio_dev *indio_dev, } static IIO_CONST_ATTR_SAMP_FREQ_AVAIL( - "7.810000 15.630000 31.250000 62.500000 125 250 500 1000"); + "15.620000 31.260000 62.50000 125 250 500 1000 2000"); static struct attribute *bmc150_accel_attributes[] = { &iio_const_attr_sampling_frequency_available.dev_attr.attr, -- cgit v1.1 From 4dac0a8eefd55bb1f157d1a5a084531334a2d74c Mon Sep 17 00:00:00 2001 From: Viorel Suman Date: Wed, 18 Feb 2015 20:05:21 +0200 Subject: iio: inv_mpu6050: Clear timestamps fifo while resetting hardware fifo A hardware fifo reset always imply an invalidation of the existing timestamps, so we'll clear timestamps fifo on successfull hardware fifo reset. Signed-off-by: Viorel Suman Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c | 25 ++++++++++++++----------- 1 file changed, 14 insertions(+), 11 deletions(-) (limited to 'drivers/iio') diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c index 0cd306a..ba27e27 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c @@ -24,6 +24,16 @@ #include #include "inv_mpu_iio.h" +static void inv_clear_kfifo(struct inv_mpu6050_state *st) +{ + unsigned long flags; + + /* take the spin lock sem to avoid interrupt kick in */ + spin_lock_irqsave(&st->time_stamp_lock, flags); + kfifo_reset(&st->timestamps); + spin_unlock_irqrestore(&st->time_stamp_lock, flags); +} + int inv_reset_fifo(struct iio_dev *indio_dev) { int result; @@ -50,6 +60,10 @@ int inv_reset_fifo(struct iio_dev *indio_dev) INV_MPU6050_BIT_FIFO_RST); if (result) goto reset_fifo_fail; + + /* clear timestamps fifo */ + inv_clear_kfifo(st); + /* enable interrupt */ if (st->chip_config.accl_fifo_enable || st->chip_config.gyro_fifo_enable) { @@ -83,16 +97,6 @@ reset_fifo_fail: return result; } -static void inv_clear_kfifo(struct inv_mpu6050_state *st) -{ - unsigned long flags; - - /* take the spin lock sem to avoid interrupt kick in */ - spin_lock_irqsave(&st->time_stamp_lock, flags); - kfifo_reset(&st->timestamps); - spin_unlock_irqrestore(&st->time_stamp_lock, flags); -} - /** * inv_mpu6050_irq_handler() - Cache a timestamp at each data ready interrupt. */ @@ -184,7 +188,6 @@ end_session: flush_fifo: /* Flush HW and SW FIFOs. */ inv_reset_fifo(indio_dev); - inv_clear_kfifo(st); mutex_unlock(&indio_dev->mlock); iio_trigger_notify_done(indio_dev->trig); -- cgit v1.1 From af5e1a68318e2ed2de22fc2d7a02f2882abe073c Mon Sep 17 00:00:00 2001 From: Adriana Reus Date: Mon, 23 Feb 2015 16:40:51 +0200 Subject: iio:inv-mpu6050: Fix inconsistency for the scale channel Fix inconsistency in the semantics of the scale attribute. For scale the write_raw function was considering the scale table index and writing the appropriate value into the range register, while for read_raw it was outputting the actual scale. Fix this behaviour and adhere to the iio ABI specification. Signed-off-by: Adriana Reus Reviewed-by: Viorel Suman Signed-off-by: Jonathan Cameron --- drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 56 ++++++++++++++++-------------- 1 file changed, 30 insertions(+), 26 deletions(-) (limited to 'drivers/iio') diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c index d8d5bed..ef76afe 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c @@ -410,42 +410,46 @@ error_read_raw: } } -static int inv_mpu6050_write_fsr(struct inv_mpu6050_state *st, int fsr) +static int inv_mpu6050_write_gyro_scale(struct inv_mpu6050_state *st, int val) { - int result; + int result, i; u8 d; - if (fsr < 0 || fsr > INV_MPU6050_MAX_GYRO_FS_PARAM) - return -EINVAL; - if (fsr == st->chip_config.fsr) - return 0; + for (i = 0; i < ARRAY_SIZE(gyro_scale_6050); ++i) { + if (gyro_scale_6050[i] == val) { + d = (i << INV_MPU6050_GYRO_CONFIG_FSR_SHIFT); + result = inv_mpu6050_write_reg(st, + st->reg->gyro_config, d); + if (result) + return result; - d = (fsr << INV_MPU6050_GYRO_CONFIG_FSR_SHIFT); - result = inv_mpu6050_write_reg(st, st->reg->gyro_config, d); - if (result) - return result; - st->chip_config.fsr = fsr; + st->chip_config.fsr = i; + return 0; + } + } - return 0; + return -EINVAL; } -static int inv_mpu6050_write_accel_fs(struct inv_mpu6050_state *st, int fs) +static int inv_mpu6050_write_accel_scale(struct inv_mpu6050_state *st, int val) { - int result; + int result, i; u8 d; - if (fs < 0 || fs > INV_MPU6050_MAX_ACCL_FS_PARAM) - return -EINVAL; - if (fs == st->chip_config.accl_fs) - return 0; + for (i = 0; i < ARRAY_SIZE(accel_scale); ++i) { + if (accel_scale[i] == val) { + d = (i << INV_MPU6050_ACCL_CONFIG_FSR_SHIFT); + result = inv_mpu6050_write_reg(st, + st->reg->accl_config, d); + if (result) + return result; - d = (fs << INV_MPU6050_ACCL_CONFIG_FSR_SHIFT); - result = inv_mpu6050_write_reg(st, st->reg->accl_config, d); - if (result) - return result; - st->chip_config.accl_fs = fs; + st->chip_config.accl_fs = i; + return 0; + } + } - return 0; + return -EINVAL; } static int inv_mpu6050_write_raw(struct iio_dev *indio_dev, @@ -471,10 +475,10 @@ static int inv_mpu6050_write_raw(struct iio_dev *indio_dev, case IIO_CHAN_INFO_SCALE: switch (chan->type) { case IIO_ANGL_VEL: - result = inv_mpu6050_write_fsr(st, val); + result = inv_mpu6050_write_gyro_scale(st, val2); break; case IIO_ACCEL: - result = inv_mpu6050_write_accel_fs(st, val); + result = inv_mpu6050_write_accel_scale(st, val2); break; default: result = -EINVAL; -- cgit v1.1 From c1b03ab5e886760bdd38c9c7a27af149046ffe01 Mon Sep 17 00:00:00 2001 From: Martin Fuzzey Date: Thu, 19 Feb 2015 15:17:44 +0100 Subject: iio: core: Fix double free. When an error occurred during event registration memory was freed twice resulting in kernel memory corruption and a crash in unrelated code. The problem was caused by iio_device_unregister_eventset() iio_device_unregister_sysfs() being called twice, once on the error path and then again via iio_dev_release(). Fix this by making these two functions idempotent so they may be called multiple times. The problem was observed before applying 78b33216 iio:core: Handle error when mask type is not separate Signed-off-by: Martin Fuzzey Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/industrialio-core.c | 5 +++-- drivers/iio/industrialio-event.c | 1 + 2 files changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers/iio') diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c index aaba9d3..4df97f6 100644 --- a/drivers/iio/industrialio-core.c +++ b/drivers/iio/industrialio-core.c @@ -847,8 +847,7 @@ static int iio_device_add_channel_sysfs(struct iio_dev *indio_dev, * @attr_list: List of IIO device attributes * * This function frees the memory allocated for each of the IIO device - * attributes in the list. Note: if you want to reuse the list after calling - * this function you have to reinitialize it using INIT_LIST_HEAD(). + * attributes in the list. */ void iio_free_chan_devattr_list(struct list_head *attr_list) { @@ -856,6 +855,7 @@ void iio_free_chan_devattr_list(struct list_head *attr_list) list_for_each_entry_safe(p, n, attr_list, l) { kfree(p->dev_attr.attr.name); + list_del(&p->l); kfree(p); } } @@ -936,6 +936,7 @@ static void iio_device_unregister_sysfs(struct iio_dev *indio_dev) iio_free_chan_devattr_list(&indio_dev->channel_attr_list); kfree(indio_dev->chan_attr_group.attrs); + indio_dev->chan_attr_group.attrs = NULL; } static void iio_dev_release(struct device *device) diff --git a/drivers/iio/industrialio-event.c b/drivers/iio/industrialio-event.c index a4b3970..a99692b 100644 --- a/drivers/iio/industrialio-event.c +++ b/drivers/iio/industrialio-event.c @@ -500,6 +500,7 @@ int iio_device_register_eventset(struct iio_dev *indio_dev) error_free_setup_event_lines: iio_free_chan_devattr_list(&indio_dev->event_interface->dev_attr_list); kfree(indio_dev->event_interface); + indio_dev->event_interface = NULL; return ret; } -- cgit v1.1 From bbc45f3ab78edb8c97e563ddd351f851da47dab1 Mon Sep 17 00:00:00 2001 From: Richard Weinberger Date: Mon, 16 Mar 2015 22:27:10 +0100 Subject: iio/adc/cc10001_adc.c: Fix !HAS_IOMEM build Fixes: drivers/built-in.o: In function `cc10001_adc_probe': cc10001_adc.c:(.text+0x412e92): undefined reference to `devm_ioremap_resource' Signed-off-by: Richard Weinberger Signed-off-by: Jonathan Cameron --- drivers/iio/adc/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/iio') diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 202daf8..46379b1 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -137,7 +137,8 @@ config AXP288_ADC config CC10001_ADC tristate "Cosmic Circuits 10001 ADC driver" - depends on HAS_IOMEM || HAVE_CLK || REGULATOR + depends on HAVE_CLK || REGULATOR + depends on HAS_IOMEM select IIO_BUFFER select IIO_TRIGGERED_BUFFER help -- cgit v1.1 From f54e9f2be312a4e71b54aea865b2e33ccb95ef0c Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Tue, 24 Mar 2015 13:47:47 +0100 Subject: iio: adc: vf610: use ADC clock within specification Depending on conversion mode used, the ADC clock (ADCK) needs to be below a maximum frequency. According to Vybrid's data sheet this is 20MHz for the low power conversion mode. The ADC clock is depending on input clock, which is the bus clock by default. Vybrid SoC are typically clocked at at 400MHz or 500MHz, which leads to 66MHz or 83MHz bus clock respectively. Hence, a divider of 8 is required to stay below the specified maximum clock of 20MHz. Due to the different bus clock speeds, the resulting sampling frequency is not static. Hence use the ADC clock and calculate the actual available sampling frequency dynamically. This fixes bogous values observed on some 500MHz clocked Vybrid SoC. The resulting value usually showed Bit 9 being stuck at 1, or 0, which lead to a value of +/-512. Signed-off-by: Stefan Agner Acked-by: Fugang Duan Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/vf610_adc.c | 91 ++++++++++++++++++++++++++++++--------------- 1 file changed, 61 insertions(+), 30 deletions(-) (limited to 'drivers/iio') diff --git a/drivers/iio/adc/vf610_adc.c b/drivers/iio/adc/vf610_adc.c index 8ec353c..e63b8e7 100644 --- a/drivers/iio/adc/vf610_adc.c +++ b/drivers/iio/adc/vf610_adc.c @@ -141,9 +141,13 @@ struct vf610_adc { struct regulator *vref; struct vf610_adc_feature adc_feature; + u32 sample_freq_avail[5]; + struct completion completion; }; +static const u32 vf610_hw_avgs[] = { 1, 4, 8, 16, 32 }; + #define VF610_ADC_CHAN(_idx, _chan_type) { \ .type = (_chan_type), \ .indexed = 1, \ @@ -180,35 +184,47 @@ static const struct iio_chan_spec vf610_adc_iio_channels[] = { /* sentinel */ }; -/* - * ADC sample frequency, unit is ADCK cycles. - * ADC clk source is ipg clock, which is the same as bus clock. - * - * ADC conversion time = SFCAdder + AverageNum x (BCT + LSTAdder) - * SFCAdder: fixed to 6 ADCK cycles - * AverageNum: 1, 4, 8, 16, 32 samples for hardware average. - * BCT (Base Conversion Time): fixed to 25 ADCK cycles for 12 bit mode - * LSTAdder(Long Sample Time): fixed to 3 ADCK cycles - * - * By default, enable 12 bit resolution mode, clock source - * set to ipg clock, So get below frequency group: - */ -static const u32 vf610_sample_freq_avail[5] = -{1941176, 559332, 286957, 145374, 73171}; +static inline void vf610_adc_calculate_rates(struct vf610_adc *info) +{ + unsigned long adck_rate, ipg_rate = clk_get_rate(info->clk); + int i; + + /* + * Calculate ADC sample frequencies + * Sample time unit is ADCK cycles. ADCK clk source is ipg clock, + * which is the same as bus clock. + * + * ADC conversion time = SFCAdder + AverageNum x (BCT + LSTAdder) + * SFCAdder: fixed to 6 ADCK cycles + * AverageNum: 1, 4, 8, 16, 32 samples for hardware average. + * BCT (Base Conversion Time): fixed to 25 ADCK cycles for 12 bit mode + * LSTAdder(Long Sample Time): fixed to 3 ADCK cycles + */ + adck_rate = ipg_rate / info->adc_feature.clk_div; + for (i = 0; i < ARRAY_SIZE(vf610_hw_avgs); i++) + info->sample_freq_avail[i] = + adck_rate / (6 + vf610_hw_avgs[i] * (25 + 3)); +} static inline void vf610_adc_cfg_init(struct vf610_adc *info) { + struct vf610_adc_feature *adc_feature = &info->adc_feature; + /* set default Configuration for ADC controller */ - info->adc_feature.clk_sel = VF610_ADCIOC_BUSCLK_SET; - info->adc_feature.vol_ref = VF610_ADCIOC_VR_VREF_SET; + adc_feature->clk_sel = VF610_ADCIOC_BUSCLK_SET; + adc_feature->vol_ref = VF610_ADCIOC_VR_VREF_SET; + + adc_feature->calibration = true; + adc_feature->ovwren = true; + + adc_feature->res_mode = 12; + adc_feature->sample_rate = 1; + adc_feature->lpm = true; - info->adc_feature.calibration = true; - info->adc_feature.ovwren = true; + /* Use a save ADCK which is below 20MHz on all devices */ + adc_feature->clk_div = 8; - info->adc_feature.clk_div = 1; - info->adc_feature.res_mode = 12; - info->adc_feature.sample_rate = 1; - info->adc_feature.lpm = true; + vf610_adc_calculate_rates(info); } static void vf610_adc_cfg_post_set(struct vf610_adc *info) @@ -290,12 +306,10 @@ static void vf610_adc_cfg_set(struct vf610_adc *info) cfg_data = readl(info->regs + VF610_REG_ADC_CFG); - /* low power configuration */ cfg_data &= ~VF610_ADC_ADLPC_EN; if (adc_feature->lpm) cfg_data |= VF610_ADC_ADLPC_EN; - /* disable high speed */ cfg_data &= ~VF610_ADC_ADHSC_EN; writel(cfg_data, info->regs + VF610_REG_ADC_CFG); @@ -435,10 +449,27 @@ static irqreturn_t vf610_adc_isr(int irq, void *dev_id) return IRQ_HANDLED; } -static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("1941176, 559332, 286957, 145374, 73171"); +static ssize_t vf610_show_samp_freq_avail(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct vf610_adc *info = iio_priv(dev_to_iio_dev(dev)); + size_t len = 0; + int i; + + for (i = 0; i < ARRAY_SIZE(info->sample_freq_avail); i++) + len += scnprintf(buf + len, PAGE_SIZE - len, + "%u ", info->sample_freq_avail[i]); + + /* replace trailing space by newline */ + buf[len - 1] = '\n'; + + return len; +} + +static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(vf610_show_samp_freq_avail); static struct attribute *vf610_attributes[] = { - &iio_const_attr_sampling_frequency_available.dev_attr.attr, + &iio_dev_attr_sampling_frequency_available.dev_attr.attr, NULL }; @@ -502,7 +533,7 @@ static int vf610_read_raw(struct iio_dev *indio_dev, return IIO_VAL_FRACTIONAL_LOG2; case IIO_CHAN_INFO_SAMP_FREQ: - *val = vf610_sample_freq_avail[info->adc_feature.sample_rate]; + *val = info->sample_freq_avail[info->adc_feature.sample_rate]; *val2 = 0; return IIO_VAL_INT; @@ -525,9 +556,9 @@ static int vf610_write_raw(struct iio_dev *indio_dev, switch (mask) { case IIO_CHAN_INFO_SAMP_FREQ: for (i = 0; - i < ARRAY_SIZE(vf610_sample_freq_avail); + i < ARRAY_SIZE(info->sample_freq_avail); i++) - if (val == vf610_sample_freq_avail[i]) { + if (val == info->sample_freq_avail[i]) { info->adc_feature.sample_rate = i; vf610_adc_sample_set(info); return 0; -- cgit v1.1 From 4ce7ca89d6e8eae9e201cd0e972ba323f33e2fb4 Mon Sep 17 00:00:00 2001 From: Darshana Padmadas Date: Sat, 28 Mar 2015 12:07:14 +0530 Subject: iio: imu: Use iio_trigger_get for indio_dev->trig assignment This patch uses iio_trigger_get to increment the reference count of trigger device, to avoid incorrect assignment. Can result in a null pointer dereference during removal if the trigger has been changed before removal. This patch refers to a similar situation encountered through the following discussion: http://www.spinics.net/lists/linux-iio/msg13669.html Signed-off-by: Darshana Padmadas Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/imu/adis_trigger.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/iio') diff --git a/drivers/iio/imu/adis_trigger.c b/drivers/iio/imu/adis_trigger.c index e0017c2..f53e9a8 100644 --- a/drivers/iio/imu/adis_trigger.c +++ b/drivers/iio/imu/adis_trigger.c @@ -60,7 +60,7 @@ int adis_probe_trigger(struct adis *adis, struct iio_dev *indio_dev) iio_trigger_set_drvdata(adis->trig, adis); ret = iio_trigger_register(adis->trig); - indio_dev->trig = adis->trig; + indio_dev->trig = iio_trigger_get(adis->trig); if (ret) goto error_free_irq; -- cgit v1.1