From 85ad93ad56f4baf52e7c40f2e01c4df8e14d4c9c Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 19 Oct 2007 00:30:12 +0200 Subject: ide: set drive->autotune in ide_pci_setup_ports() Majority of host drivers using IDE PCI layer set drive->autotune, the only exceptions are: generic.c ns87415.c rz1000.c trm290.c * no ->set_pio_mode method it821x.c: * if memory allocation fails drive->autotune won't be set (but there also won't be ->set_pio_mode method in such case) piix.c: * MPIIX controller (no ->init_hwif method so also no ->set_pio_mode method) However if there is no ->set_pio_mode method there are no changes in behavior w.r.t. PIO tuning so always set drive->autotune in ide_pci_setup_ports(). Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/setup-pci.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/ide/setup-pci.c') diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c index 7989f52..fff567b 100644 --- a/drivers/ide/setup-pci.c +++ b/drivers/ide/setup-pci.c @@ -577,6 +577,9 @@ void ide_pci_setup_ports(struct pci_dev *dev, ide_pci_device_t *d, int pciirq, a hwif->ultra_mask = d->udma_mask; } + hwif->drives[0].autotune = 1; + hwif->drives[1].autotune = 1; + if (d->init_hwif) /* Call chipset-specific routine * for each enabled hwif -- cgit v1.1