From 242ce41fc92214c3430495edd43783c3ba3dcd2b Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Fri, 29 Dec 2006 16:49:18 -0800 Subject: [PATCH] PIIX: remove check for broken MW DMA mode 0 There's no need to check in piix_config_drive_for_dma() for broken MW DMA mode 0 as this mode is not supported by the driver (it sets hwif->mwdma_mask to 0x6), and hence can't be selected by ide_dma_speed(). (Alan sayeth "Probably right but if not you've got a subtle corruptor. Should at least stick a BUG_ON mode 0 setting right close when the mode is set.") Signed-off-by: Sergei Shtylyov Cc: Alan Cox Acked-by: Bartlomiej Zolnierkiewicz Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/ide/pci/piix.c | 31 ------------------------------- 1 file changed, 31 deletions(-) (limited to 'drivers/ide/pci') diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c index b1e9a8e..8ecd2d6 100644 --- a/drivers/ide/pci/piix.c +++ b/drivers/ide/pci/piix.c @@ -353,33 +353,6 @@ static int piix_tune_chipset (ide_drive_t *drive, u8 xferspeed) } /** - * piix_faulty_dma0 - check for DMA0 errata - * @hwif: IDE interface to check - * - * If an ICH/ICH0/ICH2 interface is is operating in multi-word - * DMA mode with 600nS cycle time the IDE PIO prefetch buffer will - * inadvertently provide an extra piece of secondary data to the primary - * device resulting in data corruption. - * - * With such a device this test function returns true. This allows - * our tuning code to follow Intel recommendations and use PIO on - * such devices. - */ - -static int piix_faulty_dma0(ide_hwif_t *hwif) -{ - switch(hwif->pci_dev->device) - { - case PCI_DEVICE_ID_INTEL_82801AA_1: /* ICH */ - case PCI_DEVICE_ID_INTEL_82801AB_1: /* ICH0 */ - case PCI_DEVICE_ID_INTEL_82801BA_8: /* ICH2 */ - case PCI_DEVICE_ID_INTEL_82801BA_9: /* ICH2 */ - return 1; - } - return 0; -} - -/** * piix_config_drive_for_dma - configure drive for DMA * @drive: IDE drive to configure * @@ -391,10 +364,6 @@ static int piix_faulty_dma0(ide_hwif_t *hwif) static int piix_config_drive_for_dma (ide_drive_t *drive) { u8 speed = ide_dma_speed(drive, piix_ratemask(drive)); - - /* Some ICH devices cannot support DMA mode 0 */ - if(speed == XFER_MW_DMA_0 && piix_faulty_dma0(HWIF(drive))) - speed = 0; /* If no DMA speed was available or the chipset has DMA bugs then disable DMA and use PIO */ -- cgit v1.1