From 90df2cb1c8822ef8d06a2b30627e7a810218b0dd Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 14 Jul 2008 22:38:32 +0200 Subject: i2c-i801: Remove verbose debugging messages Dumping the register values before and after every transaction was useful during driver development but now it's only spamming the log. Signed-off-by: Jean Delvare --- drivers/i2c/busses/i2c-i801.c | 18 ------------------ 1 file changed, 18 deletions(-) (limited to 'drivers/i2c') diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 9717ffe..965905f 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -138,11 +138,6 @@ static int i801_transaction(int xact) int result = 0; int timeout = 0; - dev_dbg(&I801_dev->dev, "Transaction (pre): CNT=%02x, CMD=%02x, " - "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT), - inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), - inb_p(SMBHSTDAT1)); - /* Make sure the SMBus host is ready to start transmitting */ /* 0x1f = Failed, Bus_Err, Dev_Err, Intr, Host_Busy */ if ((temp = (0x1f & inb_p(SMBHSTSTS))) != 0x00) { @@ -202,10 +197,6 @@ static int i801_transaction(int xact) dev_dbg(&I801_dev->dev, "Failed reset at end of transaction " "(%02x)\n", temp); } - dev_dbg(&I801_dev->dev, "Transaction (post): CNT=%02x, CMD=%02x, " - "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT), - inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), - inb_p(SMBHSTDAT1)); return result; } @@ -293,11 +284,6 @@ static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data, } outb_p(smbcmd | ENABLE_INT9, SMBHSTCNT); - dev_dbg(&I801_dev->dev, "Block (pre %d): CNT=%02x, CMD=%02x, " - "ADD=%02x, DAT0=%02x, DAT1=%02x, BLKDAT=%02x\n", i, - inb_p(SMBHSTCNT), inb_p(SMBHSTCMD), inb_p(SMBHSTADD), - inb_p(SMBHSTDAT0), inb_p(SMBHSTDAT1), inb_p(SMBBLKDAT)); - /* Make sure the SMBus host is ready to start transmitting */ temp = inb_p(SMBHSTSTS); if (i == 1) { @@ -381,10 +367,6 @@ static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data, "Bad status (%02x) at end of transaction\n", temp); } - dev_dbg(&I801_dev->dev, "Block (post %d): CNT=%02x, CMD=%02x, " - "ADD=%02x, DAT0=%02x, DAT1=%02x, BLKDAT=%02x\n", i, - inb_p(SMBHSTCNT), inb_p(SMBHSTCMD), inb_p(SMBHSTADD), - inb_p(SMBHSTDAT0), inb_p(SMBHSTDAT1), inb_p(SMBBLKDAT)); if (result < 0) return result; -- cgit v1.1