From 2b7a5056a0a7ff17d5d2004c29c852a92a6bd632 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Mon, 14 Jul 2008 22:38:35 +0200 Subject: i2c: New-style EEPROM driver using device IDs Add a new-style driver for most I2C EEPROMs, giving sysfs read/write access to their data. Tested with various chips and clock rates. Signed-off-by: Wolfram Sang Signed-off-by: Jean Delvare --- drivers/i2c/chips/Kconfig | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) (limited to 'drivers/i2c/chips/Kconfig') diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig index 6326468..50e0a46 100644 --- a/drivers/i2c/chips/Kconfig +++ b/drivers/i2c/chips/Kconfig @@ -14,6 +14,32 @@ config DS1682 This driver can also be built as a module. If so, the module will be called ds1682. +config AT24 + tristate "EEPROMs from most vendors" + depends on SYSFS && EXPERIMENTAL + help + Enable this driver to get read/write support to most I2C EEPROMs, + after you configure the driver to know about each EEPROM on + your target board. Use these generic chip names, instead of + vendor-specific ones like at24c64 or 24lc02: + + 24c00, 24c01, 24c02, spd (readonly 24c02), 24c04, 24c08, + 24c16, 24c32, 24c64, 24c128, 24c256, 24c512, 24c1024 + + Unless you like data loss puzzles, always be sure that any chip + you configure as a 24c32 (32 kbit) or larger is NOT really a + 24c16 (16 kbit) or smaller, and vice versa. Marking the chip + as read-only won't help recover from this. Also, if your chip + has any software write-protect mechanism you may want to review the + code to make sure this driver won't turn it on by accident. + + If you use this with an SMBus adapter instead of an I2C adapter, + full functionality is not available. Only smaller devices are + supported (24c16 and below, max 4 kByte). + + This driver can also be built as a module. If so, the module + will be called at24. + config SENSORS_EEPROM tristate "EEPROM reader" depends on EXPERIMENTAL -- cgit v1.1