From 1ab52cf910bbbee92861227e6ed77c56b1dc233c Mon Sep 17 00:00:00 2001 From: Baruch Siach Date: Mon, 22 Jun 2009 16:36:29 +0300 Subject: i2c: driver for the Synopsys DesignWare I2C controller The i2c Linux driver for the DesignWare i2c block of Synopsys, which is meant for AMBA Peripheral Bus. This i2c block is used on SoC chips like the ARM9 based PVG610. Signed-off-by: Baruch Siach Signed-off-by: Ben Dooks --- drivers/i2c/busses/Kconfig | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers/i2c/busses/Kconfig') diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 3c259ee..aa87b6a 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -326,6 +326,15 @@ config I2C_DAVINCI devices such as DaVinci NIC. For details please see http://www.ti.com/davinci +config I2C_DESIGNWARE + tristate "Synopsys DesignWare" + help + If you say yes to this option, support will be included for the + Synopsys DesignWare I2C adapter. Only master mode is supported. + + This driver can also be built as a module. If so, the module + will be called i2c-designware. + config I2C_GPIO tristate "GPIO-based bitbanging I2C" depends on GENERIC_GPIO -- cgit v1.1