From 52df6440a29123eed912183fe785bbe174ef14b9 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 9 Dec 2009 20:35:57 +0100 Subject: hwmon: Clean up detect functions As kind is now hard-coded to -1, there is room for code clean-ups. Signed-off-by: Jean Delvare Acked-by: Corentin Labbe Cc: "Mark M. Hoffman" Cc: Juerg Haefliger Cc: Riku Voipio Acked-by: "Hans J. Koch" Cc: Rudolf Marek --- drivers/hwmon/max6650.c | 20 ++------------------ 1 file changed, 2 insertions(+), 18 deletions(-) (limited to 'drivers/hwmon/max6650.c') diff --git a/drivers/hwmon/max6650.c b/drivers/hwmon/max6650.c index 58f66be..1da561e 100644 --- a/drivers/hwmon/max6650.c +++ b/drivers/hwmon/max6650.c @@ -534,7 +534,7 @@ static int max6650_detect(struct i2c_client *client, int kind, struct i2c_adapter *adapter = client->adapter; int address = client->addr; - dev_dbg(&adapter->dev, "max6650_detect called, kind = %d\n", kind); + dev_dbg(&adapter->dev, "max6650_detect called\n"); if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { dev_dbg(&adapter->dev, "max6650: I2C bus doesn't support " @@ -542,23 +542,7 @@ static int max6650_detect(struct i2c_client *client, int kind, return -ENODEV; } - /* - * Now we do the remaining detection. A negative kind means that - * the driver was loaded with no force parameter (default), so we - * must both detect and identify the chip (actually there is only - * one possible kind of chip for now, max6650). A zero kind means that - * the driver was loaded with the force parameter, the detection - * step shall be skipped. A positive kind means that the driver - * was loaded with the force parameter and a given kind of chip is - * requested, so both the detection and the identification steps - * are skipped. - * - * Currently I can find no way to distinguish between a MAX6650 and - * a MAX6651. This driver has only been tried on the former. - */ - - if ((kind < 0) && - ( (i2c_smbus_read_byte_data(client, MAX6650_REG_CONFIG) & 0xC0) + if (((i2c_smbus_read_byte_data(client, MAX6650_REG_CONFIG) & 0xC0) ||(i2c_smbus_read_byte_data(client, MAX6650_REG_GPIO_STAT) & 0xE0) ||(i2c_smbus_read_byte_data(client, MAX6650_REG_ALARM_EN) & 0xE0) ||(i2c_smbus_read_byte_data(client, MAX6650_REG_ALARM) & 0xE0) -- cgit v1.1