From 8f3128e714ded7cf1e8c786c204a4f253b5d8ff4 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Tue, 16 Jun 2009 15:34:17 -0700 Subject: lis3: add click function The LIS302DL accelerometer chip has a 'click' feature which can be used to detect sudden motion on any of the three axis. Configuration data is passed via spi platform_data and no action is taken if that's not specified, so it won't harm any existing platform. To make the configuration effective, the IRQ lines need to be set up appropriately. This patch also adds a way to do that from board support code. The DD_* definitions were factored out to an own enum because they are specific to LIS3LV02D devices. Signed-off-by: Daniel Mack Acked-by: Pavel Machek Acked-by: Eric Piel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/hwmon/lis3lv02d.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'drivers/hwmon/lis3lv02d.c') diff --git a/drivers/hwmon/lis3lv02d.c b/drivers/hwmon/lis3lv02d.c index 3661906..271338b 100644 --- a/drivers/hwmon/lis3lv02d.c +++ b/drivers/hwmon/lis3lv02d.c @@ -438,6 +438,26 @@ int lis3lv02d_init_device(struct lis3lv02d *dev) if (lis3lv02d_joystick_enable()) printk(KERN_ERR DRIVER_NAME ": joystick initialization failed\n"); + /* passing in platform specific data is purely optional and only + * used by the SPI transport layer at the moment */ + if (dev->pdata) { + struct lis3lv02d_platform_data *p = dev->pdata; + + if (p->click_flags && (dev->whoami == LIS_SINGLE_ID)) { + dev->write(dev, CLICK_CFG, p->click_flags); + dev->write(dev, CLICK_TIMELIMIT, p->click_time_limit); + dev->write(dev, CLICK_LATENCY, p->click_latency); + dev->write(dev, CLICK_WINDOW, p->click_window); + dev->write(dev, CLICK_THSZ, p->click_thresh_z & 0xf); + dev->write(dev, CLICK_THSY_X, + (p->click_thresh_x & 0xf) | + (p->click_thresh_y << 4)); + } + + if (p->irq_cfg) + dev->write(dev, CTRL_REG3, p->irq_cfg); + } + /* bail if we did not get an IRQ from the bus layer */ if (!dev->irq) { printk(KERN_ERR DRIVER_NAME -- cgit v1.1