From 4a8dece21eea0ad6aca442272673d48693cd93b4 Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Mon, 5 Nov 2012 13:51:51 +0200 Subject: drm/i915/crt: fix DPMS standby and suspend mode handling MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit PCH platforms and VLV should map DPMS standby and suspend modes to off, but due to a buggy reversed comparison this is done on pre-PCH platforms instead. Reported-by: Loïc Yhuel Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=56754 Signed-off-by: Jani Nikula Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_crt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c index b726b47..6345878 100644 --- a/drivers/gpu/drm/i915/intel_crt.c +++ b/drivers/gpu/drm/i915/intel_crt.c @@ -143,7 +143,7 @@ static void intel_crt_dpms(struct drm_connector *connector, int mode) int old_dpms; /* PCH platforms and VLV only support on/off. */ - if (INTEL_INFO(dev)->gen < 5 && mode != DRM_MODE_DPMS_ON) + if (INTEL_INFO(dev)->gen >= 5 && mode != DRM_MODE_DPMS_ON) mode = DRM_MODE_DPMS_OFF; if (mode == connector->dpms) -- cgit v1.1 From d0ddfbd3d1346c1f481ec2289eef350cdba64b42 Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Mon, 12 Nov 2012 18:31:35 +0200 Subject: drm/i915/sdvo: clean up connectors on intel_sdvo_init() failures Any failures in intel_sdvo_init() after the intel_sdvo_setup_output() call left behind ghost connectors, attached (with a dangling pointer) to the sdvo that has been cleaned up and freed. Properly destroy any connectors attached to the encoder. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=46381 CC: Chris Wilson Signed-off-by: Jani Nikula Cc: stable@vger.kernel.org Tested-by: bjo@nord-west.org [danvet: added a comment to explain why we need to clean up connectors even when sdvo_output_setup fails.] Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_sdvo.c | 22 +++++++++++++++++++--- 1 file changed, 19 insertions(+), 3 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index 79d308d..c600fb0 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -2382,6 +2382,18 @@ intel_sdvo_output_setup(struct intel_sdvo *intel_sdvo, uint16_t flags) return true; } +static void intel_sdvo_output_cleanup(struct intel_sdvo *intel_sdvo) +{ + struct drm_device *dev = intel_sdvo->base.base.dev; + struct drm_connector *connector, *tmp; + + list_for_each_entry_safe(connector, tmp, + &dev->mode_config.connector_list, head) { + if (intel_attached_encoder(connector) == &intel_sdvo->base) + intel_sdvo_destroy(connector); + } +} + static bool intel_sdvo_tv_create_property(struct intel_sdvo *intel_sdvo, struct intel_sdvo_connector *intel_sdvo_connector, int type) @@ -2705,7 +2717,8 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob) intel_sdvo->caps.output_flags) != true) { DRM_DEBUG_KMS("SDVO output failed to setup on %s\n", SDVO_NAME(intel_sdvo)); - goto err; + /* Output_setup can leave behind connectors! */ + goto err_output; } /* Only enable the hotplug irq if we need it, to work around noisy @@ -2718,12 +2731,12 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob) /* Set the input timing to the screen. Assume always input 0. */ if (!intel_sdvo_set_target_input(intel_sdvo)) - goto err; + goto err_output; if (!intel_sdvo_get_input_pixel_clock_range(intel_sdvo, &intel_sdvo->pixel_clock_min, &intel_sdvo->pixel_clock_max)) - goto err; + goto err_output; DRM_DEBUG_KMS("%s device VID/DID: %02X:%02X.%02X, " "clock range %dMHz - %dMHz, " @@ -2743,6 +2756,9 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob) (SDVO_OUTPUT_TMDS1 | SDVO_OUTPUT_RGB1) ? 'Y' : 'N'); return true; +err_output: + intel_sdvo_output_cleanup(intel_sdvo); + err: drm_encoder_cleanup(&intel_encoder->base); i2c_del_adapter(&intel_sdvo->ddc); -- cgit v1.1 From 2f4f649a69a9eb51f6e98130e19dd90a260a4145 Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Mon, 12 Nov 2012 14:33:44 +0200 Subject: drm/i915: do not ignore eDP bpc settings from vbt There are laptops out there that need the eDP bpc from VBT. This is effectively a revert of commit 4344b813f105a19f793f1fd93ad775b784648b95 Author: Daniel Vetter Date: Fri Aug 10 11:10:20 2012 +0200 drm/i915: ignore eDP bpc settings from vbt but putting the VBT check after the EDID check to see them both in dmesg if this clamps more than the EDID. We have enough history with bpc clamping to warrant the extra debug info. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=47641 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=56401 Signed-off-by: Jani Nikula Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_display.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 461a637..4154bcd 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -3841,6 +3841,17 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc, } } + if (intel_encoder->type == INTEL_OUTPUT_EDP) { + /* Use VBT settings if we have an eDP panel */ + unsigned int edp_bpc = dev_priv->edp.bpp / 3; + + if (edp_bpc < display_bpc) { + DRM_DEBUG_KMS("clamping display bpc (was %d) to eDP (%d)\n", display_bpc, edp_bpc); + display_bpc = edp_bpc; + } + continue; + } + /* * HDMI is either 12 or 8, so if the display lets 10bpc sneak * through, clamp it down. (Note: >12bpc will be caught below.) -- cgit v1.1