From 63f57cd45b0811de9663edf4af6b170c5bd3860d Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Sat, 21 Sep 2013 20:39:49 +0200 Subject: gpio: pcf857x: Add OF support Add DT bindings for the pcf857x-compatible chips and parse the device tree node in the driver. Signed-off-by: Laurent Pinchart Signed-off-by: Linus Walleij --- drivers/gpio/gpio-pcf857x.c | 44 ++++++++++++++++++++++++++++++++++++-------- 1 file changed, 36 insertions(+), 8 deletions(-) (limited to 'drivers/gpio/gpio-pcf857x.c') diff --git a/drivers/gpio/gpio-pcf857x.c b/drivers/gpio/gpio-pcf857x.c index 54725a6..1535686 100644 --- a/drivers/gpio/gpio-pcf857x.c +++ b/drivers/gpio/gpio-pcf857x.c @@ -26,6 +26,8 @@ #include #include #include +#include +#include #include #include @@ -49,6 +51,27 @@ static const struct i2c_device_id pcf857x_id[] = { }; MODULE_DEVICE_TABLE(i2c, pcf857x_id); +#ifdef CONFIG_OF +static const struct of_device_id pcf857x_of_table[] = { + { .compatible = "nxp,pcf8574" }, + { .compatible = "nxp,pcf8574a" }, + { .compatible = "nxp,pca8574" }, + { .compatible = "nxp,pca9670" }, + { .compatible = "nxp,pca9672" }, + { .compatible = "nxp,pca9674" }, + { .compatible = "nxp,pcf8575" }, + { .compatible = "nxp,pca8575" }, + { .compatible = "nxp,pca9671" }, + { .compatible = "nxp,pca9673" }, + { .compatible = "nxp,pca9675" }, + { .compatible = "maxim,max7328" }, + { .compatible = "maxim,max7329" }, + { .compatible = "ti,tca9554" }, + { } +}; +MODULE_DEVICE_TABLE(of, pcf857x_of_table); +#endif + /* * The pcf857x, pca857x, and pca967x chips only expose one read and one * write register. Writing a "one" bit (to match the reset state) lets @@ -260,14 +283,18 @@ fail: static int pcf857x_probe(struct i2c_client *client, const struct i2c_device_id *id) { - struct pcf857x_platform_data *pdata; + struct pcf857x_platform_data *pdata = dev_get_platdata(&client->dev); + struct device_node *np = client->dev.of_node; struct pcf857x *gpio; + unsigned int n_latch = 0; int status; - pdata = dev_get_platdata(&client->dev); - if (!pdata) { + if (IS_ENABLED(CONFIG_OF) && np) + of_property_read_u32(np, "lines-initial-states", &n_latch); + else if (pdata) + n_latch = pdata->n_latch; + else dev_dbg(&client->dev, "no platform data\n"); - } /* Allocate, initialize, and register this gpio_chip. */ gpio = devm_kzalloc(&client->dev, sizeof(*gpio), GFP_KERNEL); @@ -360,11 +387,11 @@ static int pcf857x_probe(struct i2c_client *client, * may cause transient glitching since it can't know the last value * written (some pins may need to be driven low). * - * Using pdata->n_latch avoids that trouble. When left initialized - * to zero, our software copy of the "latch" then matches the chip's - * all-ones reset state. Otherwise it flags pins to be driven low. + * Using n_latch avoids that trouble. When left initialized to zero, + * our software copy of the "latch" then matches the chip's all-ones + * reset state. Otherwise it flags pins to be driven low. */ - gpio->out = pdata ? ~pdata->n_latch : ~0; + gpio->out = ~n_latch; gpio->status = gpio->out; status = gpiochip_add(&gpio->chip); @@ -426,6 +453,7 @@ static struct i2c_driver pcf857x_driver = { .driver = { .name = "pcf857x", .owner = THIS_MODULE, + .of_match_table = of_match_ptr(pcf857x_of_table), }, .probe = pcf857x_probe, .remove = pcf857x_remove, -- cgit v1.1