From 02c5ba1ee99cd67b27f562c120ae659e8acadded Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Fri, 13 May 2016 10:49:14 +0530 Subject: gpio: max77620: add gpio driver for MAX77620/MAX20024 MAXIM Semiconductor's PMIC, MAX77620/MAX20024 has 8 GPIO pins. It also supports interrupts from these pins. Add GPIO driver for these pins to control via GPIO APIs. Signed-off-by: Laxman Dewangan Reviewed-by: Linus Walleij Signed-off-by: Linus Walleij --- drivers/gpio/Kconfig | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers/gpio/Kconfig') diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 48da857..9244381 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -870,6 +870,15 @@ config GPIO_LP3943 LP3943 can be used as a GPIO expander which provides up to 16 GPIOs. Open drain outputs are required for this usage. +config GPIO_MAX77620 + tristate "GPIO support for PMIC MAX77620 and MAX20024" + depends on MFD_MAX77620 + help + GPIO driver for MAX77620 and MAX20024 PMIC from Maxim Semiconductor. + MAX77620 PMIC has 8 pins that can be configured as GPIOs. The + driver also provides interrupt support for each of the gpios. + Say yes here to enable the max77620 to be used as gpio controller. + config GPIO_MSIC bool "Intel MSIC mixed signal gpio support" depends on MFD_INTEL_MSIC -- cgit v1.1