From 60ed99961469a3683b52d09bc0771053fb484ae0 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 22 Dec 2017 13:36:15 +0100 Subject: extcon: axp288: Redo charger type detection a couple of seconds after probe() The axp288 extcon code depends on other drivers to do things like mux the data lines, enable/disable vbus based on the id-pin, etc. Sometimes the BIOS has not set these things up correctly resulting in the initial charger cable type detection giving a wrong result and we end up not charging or charging at only 0.5A. This commit starts a second charger-detection cycle a couple of seconds after the first one finishes, giving the other drivers time to load and do their thing. Signed-off-by: Hans de Goede Signed-off-by: Chanwoo Choi --- drivers/extcon/extcon-axp288.c | 32 ++++++++++++++++++++++++++++++-- 1 file changed, 30 insertions(+), 2 deletions(-) (limited to 'drivers/extcon/extcon-axp288.c') diff --git a/drivers/extcon/extcon-axp288.c b/drivers/extcon/extcon-axp288.c index 1621f2f..74d5be0 100644 --- a/drivers/extcon/extcon-axp288.c +++ b/drivers/extcon/extcon-axp288.c @@ -1,6 +1,7 @@ /* * extcon-axp288.c - X-Power AXP288 PMIC extcon cable detection driver * + * Copyright (C) 2016-2017 Hans de Goede * Copyright (C) 2015 Intel Corporation * Author: Ramakrishna Pallala * @@ -97,9 +98,11 @@ struct axp288_extcon_info { struct device *dev; struct regmap *regmap; struct regmap_irq_chip_data *regmap_irqc; + struct delayed_work det_work; int irq[EXTCON_IRQ_END]; struct extcon_dev *edev; unsigned int previous_cable; + bool first_detect_done; }; /* Power up/down reason string array */ @@ -137,6 +140,25 @@ static void axp288_extcon_log_rsi(struct axp288_extcon_info *info) regmap_write(info->regmap, AXP288_PS_BOOT_REASON_REG, clear_mask); } +static void axp288_chrg_detect_complete(struct axp288_extcon_info *info) +{ + /* + * We depend on other drivers to do things like mux the data lines, + * enable/disable vbus based on the id-pin, etc. Sometimes the BIOS has + * not set these things up correctly resulting in the initial charger + * cable type detection giving a wrong result and we end up not charging + * or charging at only 0.5A. + * + * So we schedule a second cable type detection after 2 seconds to + * give the other drivers time to load and do their thing. + */ + if (!info->first_detect_done) { + queue_delayed_work(system_wq, &info->det_work, + msecs_to_jiffies(2000)); + info->first_detect_done = true; + } +} + static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info) { int ret, stat, cfg, pwr_stat; @@ -201,6 +223,8 @@ no_vbus: info->previous_cable = cable; } + axp288_chrg_detect_complete(info); + return 0; dev_det_ret: @@ -222,8 +246,11 @@ static irqreturn_t axp288_extcon_isr(int irq, void *data) return IRQ_HANDLED; } -static void axp288_extcon_enable(struct axp288_extcon_info *info) +static void axp288_extcon_det_work(struct work_struct *work) { + struct axp288_extcon_info *info = + container_of(work, struct axp288_extcon_info, det_work.work); + regmap_update_bits(info->regmap, AXP288_BC_GLOBAL_REG, BC_GLOBAL_RUN, 0); /* Enable the charger detection logic */ @@ -245,6 +272,7 @@ static int axp288_extcon_probe(struct platform_device *pdev) info->regmap = axp20x->regmap; info->regmap_irqc = axp20x->regmap_irqc; info->previous_cable = EXTCON_NONE; + INIT_DELAYED_WORK(&info->det_work, axp288_extcon_det_work); platform_set_drvdata(pdev, info); @@ -290,7 +318,7 @@ static int axp288_extcon_probe(struct platform_device *pdev) } /* Start charger cable type detection */ - axp288_extcon_enable(info); + queue_delayed_work(system_wq, &info->det_work, 0); return 0; } -- cgit v1.1