From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/eisa/eisa-bus.c | 430 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 430 insertions(+) create mode 100644 drivers/eisa/eisa-bus.c (limited to 'drivers/eisa/eisa-bus.c') diff --git a/drivers/eisa/eisa-bus.c b/drivers/eisa/eisa-bus.c new file mode 100644 index 0000000..6381ba5 --- /dev/null +++ b/drivers/eisa/eisa-bus.c @@ -0,0 +1,430 @@ +/* + * EISA bus support functions for sysfs. + * + * (C) 2002, 2003 Marc Zyngier + * + * This code is released under the GPL version 2. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define SLOT_ADDRESS(r,n) (r->bus_base_addr + (0x1000 * n)) + +#define EISA_DEVINFO(i,s) { .id = { .sig = i }, .name = s } + +struct eisa_device_info { + struct eisa_device_id id; + char name[DEVICE_NAME_SIZE]; +}; + +#ifdef CONFIG_EISA_NAMES +static struct eisa_device_info __initdata eisa_table[] = { +#include "devlist.h" +}; +#define EISA_INFOS (sizeof (eisa_table) / (sizeof (struct eisa_device_info))) +#endif + +#define EISA_MAX_FORCED_DEV 16 + +static int enable_dev[EISA_MAX_FORCED_DEV]; +static int enable_dev_count; +static int disable_dev[EISA_MAX_FORCED_DEV]; +static int disable_dev_count; + +static int is_forced_dev (int *forced_tab, + int forced_count, + struct eisa_root_device *root, + struct eisa_device *edev) +{ + int i, x; + + for (i = 0; i < forced_count; i++) { + x = (root->bus_nr << 8) | edev->slot; + if (forced_tab[i] == x) + return 1; + } + + return 0; +} + +static void __init eisa_name_device (struct eisa_device *edev) +{ +#ifdef CONFIG_EISA_NAMES + int i; + for (i = 0; i < EISA_INFOS; i++) { + if (!strcmp (edev->id.sig, eisa_table[i].id.sig)) { + strlcpy (edev->pretty_name, + eisa_table[i].name, + DEVICE_NAME_SIZE); + return; + } + } + + /* No name was found */ + sprintf (edev->pretty_name, "EISA device %.7s", edev->id.sig); +#endif +} + +static char __init *decode_eisa_sig(unsigned long addr) +{ + static char sig_str[EISA_SIG_LEN]; + u8 sig[4]; + u16 rev; + int i; + + for (i = 0; i < 4; i++) { +#ifdef CONFIG_EISA_VLB_PRIMING + /* + * This ugly stuff is used to wake up VL-bus cards + * (AHA-284x is the only known example), so we can + * read the EISA id. + * + * Thankfully, this only exists on x86... + */ + outb(0x80 + i, addr); +#endif + sig[i] = inb (addr + i); + + if (!i && (sig[0] & 0x80)) + return NULL; + } + + sig_str[0] = ((sig[0] >> 2) & 0x1f) + ('A' - 1); + sig_str[1] = (((sig[0] & 3) << 3) | (sig[1] >> 5)) + ('A' - 1); + sig_str[2] = (sig[1] & 0x1f) + ('A' - 1); + rev = (sig[2] << 8) | sig[3]; + sprintf(sig_str + 3, "%04X", rev); + + return sig_str; +} + +static int eisa_bus_match (struct device *dev, struct device_driver *drv) +{ + struct eisa_device *edev = to_eisa_device (dev); + struct eisa_driver *edrv = to_eisa_driver (drv); + const struct eisa_device_id *eids = edrv->id_table; + + if (!eids) + return 0; + + while (strlen (eids->sig)) { + if (!strcmp (eids->sig, edev->id.sig) && + edev->state & EISA_CONFIG_ENABLED) { + edev->id.driver_data = eids->driver_data; + return 1; + } + + eids++; + } + + return 0; +} + +struct bus_type eisa_bus_type = { + .name = "eisa", + .match = eisa_bus_match, +}; + +int eisa_driver_register (struct eisa_driver *edrv) +{ + int r; + + edrv->driver.bus = &eisa_bus_type; + if ((r = driver_register (&edrv->driver)) < 0) + return r; + + return 0; +} + +void eisa_driver_unregister (struct eisa_driver *edrv) +{ + driver_unregister (&edrv->driver); +} + +static ssize_t eisa_show_sig (struct device *dev, char *buf) +{ + struct eisa_device *edev = to_eisa_device (dev); + return sprintf (buf,"%s\n", edev->id.sig); +} + +static DEVICE_ATTR(signature, S_IRUGO, eisa_show_sig, NULL); + +static ssize_t eisa_show_state (struct device *dev, char *buf) +{ + struct eisa_device *edev = to_eisa_device (dev); + return sprintf (buf,"%d\n", edev->state & EISA_CONFIG_ENABLED); +} + +static DEVICE_ATTR(enabled, S_IRUGO, eisa_show_state, NULL); + +static int __init eisa_init_device (struct eisa_root_device *root, + struct eisa_device *edev, + int slot) +{ + char *sig; + unsigned long sig_addr; + int i; + + sig_addr = SLOT_ADDRESS (root, slot) + EISA_VENDOR_ID_OFFSET; + + if (!(sig = decode_eisa_sig (sig_addr))) + return -1; /* No EISA device here */ + + memcpy (edev->id.sig, sig, EISA_SIG_LEN); + edev->slot = slot; + edev->state = inb (SLOT_ADDRESS (root, slot) + EISA_CONFIG_OFFSET) & EISA_CONFIG_ENABLED; + edev->base_addr = SLOT_ADDRESS (root, slot); + edev->dma_mask = root->dma_mask; /* Default DMA mask */ + eisa_name_device (edev); + edev->dev.parent = root->dev; + edev->dev.bus = &eisa_bus_type; + edev->dev.dma_mask = &edev->dma_mask; + edev->dev.coherent_dma_mask = edev->dma_mask; + sprintf (edev->dev.bus_id, "%02X:%02X", root->bus_nr, slot); + + for (i = 0; i < EISA_MAX_RESOURCES; i++) { +#ifdef CONFIG_EISA_NAMES + edev->res[i].name = edev->pretty_name; +#else + edev->res[i].name = edev->id.sig; +#endif + } + + if (is_forced_dev (enable_dev, enable_dev_count, root, edev)) + edev->state = EISA_CONFIG_ENABLED | EISA_CONFIG_FORCED; + + if (is_forced_dev (disable_dev, disable_dev_count, root, edev)) + edev->state = EISA_CONFIG_FORCED; + + return 0; +} + +static int __init eisa_register_device (struct eisa_device *edev) +{ + if (device_register (&edev->dev)) + return -1; + + device_create_file (&edev->dev, &dev_attr_signature); + device_create_file (&edev->dev, &dev_attr_enabled); + + return 0; +} + +static int __init eisa_request_resources (struct eisa_root_device *root, + struct eisa_device *edev, + int slot) +{ + int i; + + for (i = 0; i < EISA_MAX_RESOURCES; i++) { + /* Don't register resource for slot 0, since this is + * very likely to fail... :-( Instead, grab the EISA + * id, now we can display something in /proc/ioports. + */ + + /* Only one region for mainboard */ + if (!slot && i > 0) { + edev->res[i].start = edev->res[i].end = 0; + continue; + } + + if (slot) { + edev->res[i].name = NULL; + edev->res[i].start = SLOT_ADDRESS (root, slot) + (i * 0x400); + edev->res[i].end = edev->res[i].start + 0xff; + edev->res[i].flags = IORESOURCE_IO; + } else { + edev->res[i].name = NULL; + edev->res[i].start = SLOT_ADDRESS (root, slot) + EISA_VENDOR_ID_OFFSET; + edev->res[i].end = edev->res[i].start + 3; + edev->res[i].flags = IORESOURCE_BUSY; + } + + if (request_resource (root->res, &edev->res[i])) + goto failed; + } + + return 0; + + failed: + while (--i >= 0) + release_resource (&edev->res[i]); + + return -1; +} + +static void __init eisa_release_resources (struct eisa_device *edev) +{ + int i; + + for (i = 0; i < EISA_MAX_RESOURCES; i++) + if (edev->res[i].start || edev->res[i].end) + release_resource (&edev->res[i]); +} + +static int __init eisa_probe (struct eisa_root_device *root) +{ + int i, c; + struct eisa_device *edev; + + printk (KERN_INFO "EISA: Probing bus %d at %s\n", + root->bus_nr, root->dev->bus_id); + + /* First try to get hold of slot 0. If there is no device + * here, simply fail, unless root->force_probe is set. */ + + if (!(edev = kmalloc (sizeof (*edev), GFP_KERNEL))) { + printk (KERN_ERR "EISA: Couldn't allocate mainboard slot\n"); + return -ENOMEM; + } + + memset (edev, 0, sizeof (*edev)); + + if (eisa_request_resources (root, edev, 0)) { + printk (KERN_WARNING \ + "EISA: Cannot allocate resource for mainboard\n"); + kfree (edev); + if (!root->force_probe) + return -EBUSY; + goto force_probe; + } + + if (eisa_init_device (root, edev, 0)) { + eisa_release_resources (edev); + kfree (edev); + if (!root->force_probe) + return -ENODEV; + goto force_probe; + } + + printk (KERN_INFO "EISA: Mainboard %s detected.\n", edev->id.sig); + + if (eisa_register_device (edev)) { + printk (KERN_ERR "EISA: Failed to register %s\n", + edev->id.sig); + eisa_release_resources (edev); + kfree (edev); + } + + force_probe: + + for (c = 0, i = 1; i <= root->slots; i++) { + if (!(edev = kmalloc (sizeof (*edev), GFP_KERNEL))) { + printk (KERN_ERR "EISA: Out of memory for slot %d\n", + i); + continue; + } + + memset (edev, 0, sizeof (*edev)); + + if (eisa_request_resources (root, edev, i)) { + printk (KERN_WARNING \ + "Cannot allocate resource for EISA slot %d\n", + i); + kfree (edev); + continue; + } + + if (eisa_init_device (root, edev, i)) { + eisa_release_resources (edev); + kfree (edev); + continue; + } + + printk (KERN_INFO "EISA: slot %d : %s detected", + i, edev->id.sig); + + switch (edev->state) { + case EISA_CONFIG_ENABLED | EISA_CONFIG_FORCED: + printk (" (forced enabled)"); + break; + + case EISA_CONFIG_FORCED: + printk (" (forced disabled)"); + break; + + case 0: + printk (" (disabled)"); + break; + } + + printk (".\n"); + + c++; + + if (eisa_register_device (edev)) { + printk (KERN_ERR "EISA: Failed to register %s\n", + edev->id.sig); + eisa_release_resources (edev); + kfree (edev); + } + } + + printk (KERN_INFO "EISA: Detected %d card%s.\n", c, c == 1 ? "" : "s"); + + return 0; +} + +static struct resource eisa_root_res = { + .name = "EISA root resource", + .start = 0, + .end = 0xffffffff, + .flags = IORESOURCE_IO, +}; + +static int eisa_bus_count; + +int __init eisa_root_register (struct eisa_root_device *root) +{ + int err; + + /* Use our own resources to check if this bus base address has + * been already registered. This prevents the virtual root + * device from registering after the real one has, for + * example... */ + + root->eisa_root_res.name = eisa_root_res.name; + root->eisa_root_res.start = root->res->start; + root->eisa_root_res.end = root->res->end; + root->eisa_root_res.flags = IORESOURCE_BUSY; + + if ((err = request_resource (&eisa_root_res, &root->eisa_root_res))) + return err; + + root->bus_nr = eisa_bus_count++; + + if ((err = eisa_probe (root))) + release_resource (&root->eisa_root_res); + + return err; +} + +static int __init eisa_init (void) +{ + int r; + + if ((r = bus_register (&eisa_bus_type))) + return r; + + printk (KERN_INFO "EISA bus registered\n"); + return 0; +} + +module_param_array(enable_dev, int, &enable_dev_count, 0444); +module_param_array(disable_dev, int, &disable_dev_count, 0444); + +postcore_initcall (eisa_init); + +int EISA_bus; /* for legacy drivers */ +EXPORT_SYMBOL (EISA_bus); +EXPORT_SYMBOL (eisa_bus_type); +EXPORT_SYMBOL (eisa_driver_register); +EXPORT_SYMBOL (eisa_driver_unregister); -- cgit v1.1