From 4a63a8b3e8d2e4f56174deb728085010aa3ac2a1 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Fri, 21 Sep 2012 15:05:47 +0300 Subject: dw_dmac: autoconfigure block_size or use platform data The maximum block size is a configurable parameter for the chip. So, driver will try to get it from the encoded component parameters. Otherwise it will come from the platform data. Signed-off-by: Andy Shevchenko Acked-by: Viresh Kumar Signed-off-by: Vinod Koul --- drivers/dma/dw_dmac.c | 37 +++++++++++++++++++++---------------- drivers/dma/dw_dmac_regs.h | 3 +++ 2 files changed, 24 insertions(+), 16 deletions(-) (limited to 'drivers/dma') diff --git a/drivers/dma/dw_dmac.c b/drivers/dma/dw_dmac.c index d71bc71..c143b7e 100644 --- a/drivers/dma/dw_dmac.c +++ b/drivers/dma/dw_dmac.c @@ -56,16 +56,6 @@ }) /* - * This is configuration-dependent and usually a funny size like 4095. - * - * Note that this is a transfer count, i.e. if we transfer 32-bit - * words, we can do 16380 bytes per descriptor. - * - * This parameter is also system-specific. - */ -#define DWC_MAX_COUNT 4095U - -/* * Number of descriptors to allocate for each channel. This should be * made configurable somehow; preferably, the clients (at least the * ones using slave transfers) should be able to give us a hint. @@ -672,7 +662,7 @@ dwc_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src, for (offset = 0; offset < len; offset += xfer_count << src_width) { xfer_count = min_t(size_t, (len - offset) >> src_width, - DWC_MAX_COUNT); + dwc->block_size); desc = dwc_desc_get(dwc); if (!desc) @@ -773,8 +763,8 @@ slave_sg_todev_fill_desc: desc->lli.sar = mem; desc->lli.dar = reg; desc->lli.ctllo = ctllo | DWC_CTLL_SRC_WIDTH(mem_width); - if ((len >> mem_width) > DWC_MAX_COUNT) { - dlen = DWC_MAX_COUNT << mem_width; + if ((len >> mem_width) > dwc->block_size) { + dlen = dwc->block_size << mem_width; mem += dlen; len -= dlen; } else { @@ -833,8 +823,8 @@ slave_sg_fromdev_fill_desc: desc->lli.sar = reg; desc->lli.dar = mem; desc->lli.ctllo = ctllo | DWC_CTLL_DST_WIDTH(mem_width); - if ((len >> reg_width) > DWC_MAX_COUNT) { - dlen = DWC_MAX_COUNT << reg_width; + if ((len >> reg_width) > dwc->block_size) { + dlen = dwc->block_size << reg_width; mem += dlen; len -= dlen; } else { @@ -1217,7 +1207,7 @@ struct dw_cyclic_desc *dw_dma_cyclic_prep(struct dma_chan *chan, periods = buf_len / period_len; /* Check for too big/unaligned periods and unaligned DMA buffer. */ - if (period_len > (DWC_MAX_COUNT << reg_width)) + if (period_len > (dwc->block_size << reg_width)) goto out_err; if (unlikely(period_len & ((1 << reg_width) - 1))) goto out_err; @@ -1383,6 +1373,7 @@ static int __devinit dw_probe(struct platform_device *pdev) bool autocfg; unsigned int dw_params; unsigned int nr_channels; + unsigned int max_blk_size = 0; int irq; int err; int i; @@ -1423,6 +1414,10 @@ static int __devinit dw_probe(struct platform_device *pdev) dw->regs = regs; + /* get hardware configuration parameters */ + if (autocfg) + max_blk_size = dma_readl(dw, MAX_BLK_SIZE); + /* Calculate all channel mask before DMA setup */ dw->all_chan_mask = (1 << nr_channels) - 1; @@ -1468,6 +1463,16 @@ static int __devinit dw_probe(struct platform_device *pdev) INIT_LIST_HEAD(&dwc->free_list); channel_clear_bit(dw, CH_EN, dwc->mask); + + /* hardware configuration */ + if (autocfg) + /* Decode maximum block size for given channel. The + * stored 4 bit value represents blocks from 0x00 for 3 + * up to 0x0a for 4095. */ + dwc->block_size = + (4 << ((max_blk_size >> 4 * i) & 0xf)) - 1; + else + dwc->block_size = pdata->block_size; } /* Clear all interrupts on all channels. */ diff --git a/drivers/dma/dw_dmac_regs.h b/drivers/dma/dw_dmac_regs.h index 8a3a81a..2a1cc53 100644 --- a/drivers/dma/dw_dmac_regs.h +++ b/drivers/dma/dw_dmac_regs.h @@ -193,6 +193,9 @@ struct dw_dma_chan { unsigned int descs_allocated; + /* hardware configuration */ + unsigned int block_size; + /* configuration passed via DMA_SLAVE_CONFIG */ struct dma_slave_config dma_sconfig; }; -- cgit v1.1