From 250eac8027c90b881408c40eeeb7b9cb8249304e Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Fri, 4 Jan 2013 13:42:35 +0100 Subject: dma: coh901318: remove hardcoded target addresses Nowadays the clients should use the dmaengine framework to tell the DMA driver what target address to use, so delete these addresses, they are for an out-of-tree driver anyway. Acked-by: Vinod Koul Signed-off-by: Linus Walleij --- drivers/dma/coh901318.c | 19 ------------------- 1 file changed, 19 deletions(-) (limited to 'drivers/dma/coh901318.c') diff --git a/drivers/dma/coh901318.c b/drivers/dma/coh901318.c index 06d9795..15e314a 100644 --- a/drivers/dma/coh901318.c +++ b/drivers/dma/coh901318.c @@ -23,7 +23,6 @@ #include #include #include -#include #include "coh901318_lli.h" #include "dmaengine.h" @@ -99,13 +98,11 @@ const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = { .number = U300_DMA_MSL_TX_0, .name = "MSL TX 0", .priority_high = 0, - .dev_addr = U300_MSL_BASE + 0 * 0x40 + 0x20, }, { .number = U300_DMA_MSL_TX_1, .name = "MSL TX 1", .priority_high = 0, - .dev_addr = U300_MSL_BASE + 1 * 0x40 + 0x20, .param.config = COH901318_CX_CFG_CH_DISABLE | COH901318_CX_CFG_LCR_DISABLE | COH901318_CX_CFG_TC_IRQ_ENABLE | @@ -157,7 +154,6 @@ const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = { .number = U300_DMA_MSL_TX_2, .name = "MSL TX 2", .priority_high = 0, - .dev_addr = U300_MSL_BASE + 2 * 0x40 + 0x20, .param.config = COH901318_CX_CFG_CH_DISABLE | COH901318_CX_CFG_LCR_DISABLE | COH901318_CX_CFG_TC_IRQ_ENABLE | @@ -210,7 +206,6 @@ const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = { .number = U300_DMA_MSL_TX_3, .name = "MSL TX 3", .priority_high = 0, - .dev_addr = U300_MSL_BASE + 3 * 0x40 + 0x20, .param.config = COH901318_CX_CFG_CH_DISABLE | COH901318_CX_CFG_LCR_DISABLE | COH901318_CX_CFG_TC_IRQ_ENABLE | @@ -262,7 +257,6 @@ const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = { .number = U300_DMA_MSL_TX_4, .name = "MSL TX 4", .priority_high = 0, - .dev_addr = U300_MSL_BASE + 4 * 0x40 + 0x20, .param.config = COH901318_CX_CFG_CH_DISABLE | COH901318_CX_CFG_LCR_DISABLE | COH901318_CX_CFG_TC_IRQ_ENABLE | @@ -314,25 +308,21 @@ const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = { .number = U300_DMA_MSL_TX_5, .name = "MSL TX 5", .priority_high = 0, - .dev_addr = U300_MSL_BASE + 5 * 0x40 + 0x20, }, { .number = U300_DMA_MSL_TX_6, .name = "MSL TX 6", .priority_high = 0, - .dev_addr = U300_MSL_BASE + 6 * 0x40 + 0x20, }, { .number = U300_DMA_MSL_RX_0, .name = "MSL RX 0", .priority_high = 0, - .dev_addr = U300_MSL_BASE + 0 * 0x40 + 0x220, }, { .number = U300_DMA_MSL_RX_1, .name = "MSL RX 1", .priority_high = 0, - .dev_addr = U300_MSL_BASE + 1 * 0x40 + 0x220, .param.config = COH901318_CX_CFG_CH_DISABLE | COH901318_CX_CFG_LCR_DISABLE | COH901318_CX_CFG_TC_IRQ_ENABLE | @@ -371,7 +361,6 @@ const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = { .number = U300_DMA_MSL_RX_2, .name = "MSL RX 2", .priority_high = 0, - .dev_addr = U300_MSL_BASE + 2 * 0x40 + 0x220, .param.config = COH901318_CX_CFG_CH_DISABLE | COH901318_CX_CFG_LCR_DISABLE | COH901318_CX_CFG_TC_IRQ_ENABLE | @@ -423,7 +412,6 @@ const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = { .number = U300_DMA_MSL_RX_3, .name = "MSL RX 3", .priority_high = 0, - .dev_addr = U300_MSL_BASE + 3 * 0x40 + 0x220, .param.config = COH901318_CX_CFG_CH_DISABLE | COH901318_CX_CFG_LCR_DISABLE | COH901318_CX_CFG_TC_IRQ_ENABLE | @@ -475,7 +463,6 @@ const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = { .number = U300_DMA_MSL_RX_4, .name = "MSL RX 4", .priority_high = 0, - .dev_addr = U300_MSL_BASE + 4 * 0x40 + 0x220, .param.config = COH901318_CX_CFG_CH_DISABLE | COH901318_CX_CFG_LCR_DISABLE | COH901318_CX_CFG_TC_IRQ_ENABLE | @@ -527,7 +514,6 @@ const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = { .number = U300_DMA_MSL_RX_5, .name = "MSL RX 5", .priority_high = 0, - .dev_addr = U300_MSL_BASE + 5 * 0x40 + 0x220, .param.config = COH901318_CX_CFG_CH_DISABLE | COH901318_CX_CFG_LCR_DISABLE | COH901318_CX_CFG_TC_IRQ_ENABLE | @@ -579,7 +565,6 @@ const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = { .number = U300_DMA_MSL_RX_6, .name = "MSL RX 6", .priority_high = 0, - .dev_addr = U300_MSL_BASE + 6 * 0x40 + 0x220, }, /* * Don't set up device address, burst count or size of src @@ -715,7 +700,6 @@ const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = { .number = U300_DMA_PCM_I2S0_TX, .name = "PCM I2S0 TX", .priority_high = 1, - .dev_addr = U300_PCM_I2S0_BASE + 0x14, .param.config = COH901318_CX_CFG_CH_DISABLE | COH901318_CX_CFG_LCR_DISABLE | COH901318_CX_CFG_TC_IRQ_ENABLE | @@ -767,7 +751,6 @@ const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = { .number = U300_DMA_PCM_I2S0_RX, .name = "PCM I2S0 RX", .priority_high = 1, - .dev_addr = U300_PCM_I2S0_BASE + 0x10, .param.config = COH901318_CX_CFG_CH_DISABLE | COH901318_CX_CFG_LCR_DISABLE | COH901318_CX_CFG_TC_IRQ_ENABLE | @@ -819,7 +802,6 @@ const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = { .number = U300_DMA_PCM_I2S1_TX, .name = "PCM I2S1 TX", .priority_high = 1, - .dev_addr = U300_PCM_I2S1_BASE + 0x14, .param.config = COH901318_CX_CFG_CH_DISABLE | COH901318_CX_CFG_LCR_DISABLE | COH901318_CX_CFG_TC_IRQ_ENABLE | @@ -871,7 +853,6 @@ const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = { .number = U300_DMA_PCM_I2S1_RX, .name = "PCM I2S1 RX", .priority_high = 1, - .dev_addr = U300_PCM_I2S1_BASE + 0x10, .param.config = COH901318_CX_CFG_CH_DISABLE | COH901318_CX_CFG_LCR_DISABLE | COH901318_CX_CFG_TC_IRQ_ENABLE | -- cgit v1.1