From 214a607a4f5bf5a14dab0304ba350cdaf3916795 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 10 Mar 2010 16:26:25 +0900 Subject: clocksource: Use dev_name() universally across the SH drivers. There is no need to copy in the name from the sh timer config now that dev_name() is available early. We prefer the dev_name() variant for consistent naming. Signed-off-by: Paul Mundt --- drivers/clocksource/sh_cmt.c | 32 ++++++++++++++------------------ drivers/clocksource/sh_mtu2.c | 24 +++++++++++------------- drivers/clocksource/sh_tmu.c | 28 ++++++++++++---------------- 3 files changed, 37 insertions(+), 47 deletions(-) (limited to 'drivers/clocksource') diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c index 578595c..a1d3811 100644 --- a/drivers/clocksource/sh_cmt.c +++ b/drivers/clocksource/sh_cmt.c @@ -149,13 +149,12 @@ static void sh_cmt_start_stop_ch(struct sh_cmt_priv *p, int start) static int sh_cmt_enable(struct sh_cmt_priv *p, unsigned long *rate) { - struct sh_timer_config *cfg = p->pdev->dev.platform_data; int ret; /* enable clock */ ret = clk_enable(p->clk); if (ret) { - pr_err("sh_cmt: cannot enable clock \"%s\"\n", cfg->clk); + dev_err(&p->pdev->dev, "cannot enable clock\n"); return ret; } @@ -278,7 +277,7 @@ static void sh_cmt_clock_event_program_verify(struct sh_cmt_priv *p, delay = 1; if (!delay) - pr_warning("sh_cmt: too long delay\n"); + dev_warn(&p->pdev->dev, "too long delay\n"); } while (delay); } @@ -288,7 +287,7 @@ static void sh_cmt_set_next(struct sh_cmt_priv *p, unsigned long delta) unsigned long flags; if (delta > p->max_match_value) - pr_warning("sh_cmt: delta out of range\n"); + dev_warn(&p->pdev->dev, "delta out of range\n"); spin_lock_irqsave(&p->lock, flags); p->next_match_value = delta; @@ -450,7 +449,7 @@ static int sh_cmt_register_clocksource(struct sh_cmt_priv *p, cs->resume = sh_cmt_clocksource_resume; cs->mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8); cs->flags = CLOCK_SOURCE_IS_CONTINUOUS; - pr_info("sh_cmt: %s used as clock source\n", cs->name); + dev_info(&p->pdev->dev, "used as clock source\n"); clocksource_register(cs); return 0; } @@ -496,13 +495,11 @@ static void sh_cmt_clock_event_mode(enum clock_event_mode mode, switch (mode) { case CLOCK_EVT_MODE_PERIODIC: - pr_info("sh_cmt: %s used for periodic clock events\n", - ced->name); + dev_info(&p->pdev->dev, "used for periodic clock events\n"); sh_cmt_clock_event_start(p, 1); break; case CLOCK_EVT_MODE_ONESHOT: - pr_info("sh_cmt: %s used for oneshot clock events\n", - ced->name); + dev_info(&p->pdev->dev, "used for oneshot clock events\n"); sh_cmt_clock_event_start(p, 0); break; case CLOCK_EVT_MODE_SHUTDOWN: @@ -543,7 +540,7 @@ static void sh_cmt_register_clockevent(struct sh_cmt_priv *p, ced->set_next_event = sh_cmt_clock_event_next; ced->set_mode = sh_cmt_clock_event_mode; - pr_info("sh_cmt: %s used for clock events\n", ced->name); + dev_info(&p->pdev->dev, "used for clock events\n"); clockevents_register_device(ced); } @@ -600,12 +597,12 @@ static int sh_cmt_setup(struct sh_cmt_priv *p, struct platform_device *pdev) /* map memory, let mapbase point to our channel */ p->mapbase = ioremap_nocache(res->start, resource_size(res)); if (p->mapbase == NULL) { - pr_err("sh_cmt: failed to remap I/O memory\n"); + dev_err(&p->pdev->dev, "failed to remap I/O memory\n"); goto err0; } /* request irq using setup_irq() (too early for request_irq()) */ - p->irqaction.name = cfg->name; + p->irqaction.name = dev_name(&p->pdev->dev); p->irqaction.handler = sh_cmt_interrupt; p->irqaction.dev_id = p; p->irqaction.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL; @@ -613,7 +610,7 @@ static int sh_cmt_setup(struct sh_cmt_priv *p, struct platform_device *pdev) /* get hold of clock */ p->clk = clk_get(&p->pdev->dev, cfg->clk); if (IS_ERR(p->clk)) { - pr_err("sh_cmt: cannot get clock \"%s\"\n", cfg->clk); + dev_err(&p->pdev->dev, "cannot get clock\n"); ret = PTR_ERR(p->clk); goto err1; } @@ -628,17 +625,17 @@ static int sh_cmt_setup(struct sh_cmt_priv *p, struct platform_device *pdev) p->clear_bits = ~0xc000; } - ret = sh_cmt_register(p, cfg->name, + ret = sh_cmt_register(p, (char *)dev_name(&p->pdev->dev), cfg->clockevent_rating, cfg->clocksource_rating); if (ret) { - pr_err("sh_cmt: registration failed\n"); + dev_err(&p->pdev->dev, "registration failed\n"); goto err1; } ret = setup_irq(irq, &p->irqaction); if (ret) { - pr_err("sh_cmt: failed to request irq %d\n", irq); + dev_err(&p->pdev->dev, "failed to request irq %d\n", irq); goto err1; } @@ -653,11 +650,10 @@ err0: static int __devinit sh_cmt_probe(struct platform_device *pdev) { struct sh_cmt_priv *p = platform_get_drvdata(pdev); - struct sh_timer_config *cfg = pdev->dev.platform_data; int ret; if (p) { - pr_info("sh_cmt: %s kept as earlytimer\n", cfg->name); + dev_info(&pdev->dev, "kept as earlytimer\n"); return 0; } diff --git a/drivers/clocksource/sh_mtu2.c b/drivers/clocksource/sh_mtu2.c index 4c8a759..8ce3555 100644 --- a/drivers/clocksource/sh_mtu2.c +++ b/drivers/clocksource/sh_mtu2.c @@ -118,13 +118,12 @@ static void sh_mtu2_start_stop_ch(struct sh_mtu2_priv *p, int start) static int sh_mtu2_enable(struct sh_mtu2_priv *p) { - struct sh_timer_config *cfg = p->pdev->dev.platform_data; int ret; /* enable clock */ ret = clk_enable(p->clk); if (ret) { - pr_err("sh_mtu2: cannot enable clock \"%s\"\n", cfg->clk); + dev_err(&p->pdev->dev, "cannot enable clock\n"); return ret; } @@ -193,8 +192,7 @@ static void sh_mtu2_clock_event_mode(enum clock_event_mode mode, switch (mode) { case CLOCK_EVT_MODE_PERIODIC: - pr_info("sh_mtu2: %s used for periodic clock events\n", - ced->name); + dev_info(&p->pdev->dev, "used for periodic clock events\n"); sh_mtu2_enable(p); break; case CLOCK_EVT_MODE_UNUSED: @@ -221,13 +219,13 @@ static void sh_mtu2_register_clockevent(struct sh_mtu2_priv *p, ced->cpumask = cpumask_of(0); ced->set_mode = sh_mtu2_clock_event_mode; - pr_info("sh_mtu2: %s used for clock events\n", ced->name); + dev_info(&p->pdev->dev, "used for clock events\n"); clockevents_register_device(ced); ret = setup_irq(p->irqaction.irq, &p->irqaction); if (ret) { - pr_err("sh_mtu2: failed to request irq %d\n", - p->irqaction.irq); + dev_err(&p->pdev->dev, "failed to request irq %d\n", + p->irqaction.irq); return; } } @@ -273,12 +271,12 @@ static int sh_mtu2_setup(struct sh_mtu2_priv *p, struct platform_device *pdev) /* map memory, let mapbase point to our channel */ p->mapbase = ioremap_nocache(res->start, resource_size(res)); if (p->mapbase == NULL) { - pr_err("sh_mtu2: failed to remap I/O memory\n"); + dev_err(&p->pdev->dev, "failed to remap I/O memory\n"); goto err0; } /* setup data for setup_irq() (too early for request_irq()) */ - p->irqaction.name = cfg->name; + p->irqaction.name = dev_name(&p->pdev->dev); p->irqaction.handler = sh_mtu2_interrupt; p->irqaction.dev_id = p; p->irqaction.irq = irq; @@ -287,12 +285,13 @@ static int sh_mtu2_setup(struct sh_mtu2_priv *p, struct platform_device *pdev) /* get hold of clock */ p->clk = clk_get(&p->pdev->dev, cfg->clk); if (IS_ERR(p->clk)) { - pr_err("sh_mtu2: cannot get clock \"%s\"\n", cfg->clk); + dev_err(&p->pdev->dev, "cannot get clock\n"); ret = PTR_ERR(p->clk); goto err1; } - return sh_mtu2_register(p, cfg->name, cfg->clockevent_rating); + return sh_mtu2_register(p, (char *)dev_name(&p->pdev->dev), + cfg->clockevent_rating); err1: iounmap(p->mapbase); err0: @@ -302,11 +301,10 @@ static int sh_mtu2_setup(struct sh_mtu2_priv *p, struct platform_device *pdev) static int __devinit sh_mtu2_probe(struct platform_device *pdev) { struct sh_mtu2_priv *p = platform_get_drvdata(pdev); - struct sh_timer_config *cfg = pdev->dev.platform_data; int ret; if (p) { - pr_info("sh_mtu2: %s kept as earlytimer\n", cfg->name); + dev_info(&pdev->dev, "kept as earlytimer\n"); return 0; } diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c index 961f5b5..3423945 100644 --- a/drivers/clocksource/sh_tmu.c +++ b/drivers/clocksource/sh_tmu.c @@ -106,13 +106,12 @@ static void sh_tmu_start_stop_ch(struct sh_tmu_priv *p, int start) static int sh_tmu_enable(struct sh_tmu_priv *p) { - struct sh_timer_config *cfg = p->pdev->dev.platform_data; int ret; /* enable clock */ ret = clk_enable(p->clk); if (ret) { - pr_err("sh_tmu: cannot enable clock \"%s\"\n", cfg->clk); + dev_err(&p->pdev->dev, "cannot enable clock\n"); return ret; } @@ -228,7 +227,7 @@ static int sh_tmu_register_clocksource(struct sh_tmu_priv *p, cs->disable = sh_tmu_clocksource_disable; cs->mask = CLOCKSOURCE_MASK(32); cs->flags = CLOCK_SOURCE_IS_CONTINUOUS; - pr_info("sh_tmu: %s used as clock source\n", cs->name); + dev_info(&p->pdev->dev, "used as clock source\n"); clocksource_register(cs); return 0; } @@ -276,13 +275,11 @@ static void sh_tmu_clock_event_mode(enum clock_event_mode mode, switch (mode) { case CLOCK_EVT_MODE_PERIODIC: - pr_info("sh_tmu: %s used for periodic clock events\n", - ced->name); + dev_info(&p->pdev->dev, "used for periodic clock events\n"); sh_tmu_clock_event_start(p, 1); break; case CLOCK_EVT_MODE_ONESHOT: - pr_info("sh_tmu: %s used for oneshot clock events\n", - ced->name); + dev_info(&p->pdev->dev, "used for oneshot clock events\n"); sh_tmu_clock_event_start(p, 0); break; case CLOCK_EVT_MODE_UNUSED: @@ -323,13 +320,13 @@ static void sh_tmu_register_clockevent(struct sh_tmu_priv *p, ced->set_next_event = sh_tmu_clock_event_next; ced->set_mode = sh_tmu_clock_event_mode; - pr_info("sh_tmu: %s used for clock events\n", ced->name); + dev_info(&p->pdev->dev, "used for clock events\n"); clockevents_register_device(ced); ret = setup_irq(p->irqaction.irq, &p->irqaction); if (ret) { - pr_err("sh_tmu: failed to request irq %d\n", - p->irqaction.irq); + dev_err(&p->pdev->dev, "failed to request irq %d\n", + p->irqaction.irq); return; } } @@ -378,12 +375,12 @@ static int sh_tmu_setup(struct sh_tmu_priv *p, struct platform_device *pdev) /* map memory, let mapbase point to our channel */ p->mapbase = ioremap_nocache(res->start, resource_size(res)); if (p->mapbase == NULL) { - pr_err("sh_tmu: failed to remap I/O memory\n"); + dev_err(&p->pdev->dev, "failed to remap I/O memory\n"); goto err0; } /* setup data for setup_irq() (too early for request_irq()) */ - p->irqaction.name = cfg->name; + p->irqaction.name = dev_name(&p->pdev->dev); p->irqaction.handler = sh_tmu_interrupt; p->irqaction.dev_id = p; p->irqaction.irq = irq; @@ -392,12 +389,12 @@ static int sh_tmu_setup(struct sh_tmu_priv *p, struct platform_device *pdev) /* get hold of clock */ p->clk = clk_get(&p->pdev->dev, cfg->clk); if (IS_ERR(p->clk)) { - pr_err("sh_tmu: cannot get clock \"%s\"\n", cfg->clk); + dev_err(&p->pdev->dev, "cannot get clock\n"); ret = PTR_ERR(p->clk); goto err1; } - return sh_tmu_register(p, cfg->name, + return sh_tmu_register(p, (char *)dev_name(&p->pdev->dev), cfg->clockevent_rating, cfg->clocksource_rating); err1: @@ -409,11 +406,10 @@ static int sh_tmu_setup(struct sh_tmu_priv *p, struct platform_device *pdev) static int __devinit sh_tmu_probe(struct platform_device *pdev) { struct sh_tmu_priv *p = platform_get_drvdata(pdev); - struct sh_timer_config *cfg = pdev->dev.platform_data; int ret; if (p) { - pr_info("sh_tmu: %s kept as earlytimer\n", cfg->name); + dev_info(&pdev->dev, "kept as earlytimer\n"); return 0; } -- cgit v1.1