From 811a498e5e9ab802cbd23a8ef9c844ec92450fa4 Mon Sep 17 00:00:00 2001 From: Archit Taneja Date: Sun, 28 Feb 2016 15:37:17 +0530 Subject: clk: qcom: Fix pre-divider usage for pixel RCG The clk_rcg_pixel_set_rate clk_op sets up the pre-divider by reading its current value from the NS register. Using the pre-divider wasn't really intended when creating these ops. The pixel RCG was only intended to achieve fractional multiplication provided in the pixel_table array. Leaving the pre-divider to the existing register value results in a wrong pixel clock when the bootloader sets up the display. This was left unidentified because the IFC6410 Plus board on which this was verified didn't have a bootloader that configured the display. Don't set the RCG pre-divider in freq_tbl to the existing NS register value. Force it to 1 and only use the M/N counter to achieve the desired fractional multiplication. Cc: Vinay Simha Signed-off-by: Archit Taneja Tested-by: John Stultz Signed-off-by: Stephen Boyd --- drivers/clk/qcom/clk-rcg.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/clk') diff --git a/drivers/clk/qcom/clk-rcg.c b/drivers/clk/qcom/clk-rcg.c index bfbb28f..67ce7c1 100644 --- a/drivers/clk/qcom/clk-rcg.c +++ b/drivers/clk/qcom/clk-rcg.c @@ -638,7 +638,6 @@ static int clk_rcg_pixel_set_rate(struct clk_hw *hw, unsigned long rate, return ret; src = ns_to_src(&rcg->s, ns); - f.pre_div = ns_to_pre_div(&rcg->p, ns) + 1; for (i = 0; i < num_parents; i++) { if (src == rcg->s.parent_map[i].cfg) { @@ -647,6 +646,9 @@ static int clk_rcg_pixel_set_rate(struct clk_hw *hw, unsigned long rate, } } + /* bypass the pre divider */ + f.pre_div = 1; + /* let us find appropriate m/n values for this */ for (; frac->num; frac++) { request = (rate * frac->den) / frac->num; -- cgit v1.1