From 5afe278114a8dd9480813377c75b5e40a42c5066 Mon Sep 17 00:00:00 2001 From: "Stephen M. Cameron" Date: Tue, 3 May 2011 14:53:52 -0500 Subject: cciss: do soft reset if hard reset is broken on driver load, if reset_devices is set, and the hard reset attempts fail, try to bring up the controller to the point that a command can be sent, and send it a soft reset command, then after the reset undo whatever driver initialization was done to get it to the point to take a command, and re-do it after the reset. This is to get kdump to work on all the "non-resettable" controllers (except 64xx controllers which can't be reset due to the potentially shared cache module.) Signed-off-by: Stephen M. Cameron Signed-off-by: Jens Axboe --- drivers/block/cciss.c | 236 ++++++++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 221 insertions(+), 15 deletions(-) (limited to 'drivers/block/cciss.c') diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index df58c59..23b0ba4 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -2477,6 +2477,31 @@ static int deregister_disk(ctlr_info_t *h, int drv_index, return 0; } +static int __devinit cciss_send_reset(ctlr_info_t *h, unsigned char *scsi3addr, + u8 reset_type) +{ + CommandList_struct *c; + int return_status; + + c = cmd_alloc(h); + if (!c) + return -ENOMEM; + return_status = fill_cmd(h, c, CCISS_RESET_MSG, NULL, 0, 0, + CTLR_LUNID, TYPE_MSG); + c->Request.CDB[1] = reset_type; /* fill_cmd defaults to target reset */ + if (return_status != IO_OK) { + cmd_special_free(h, c); + return return_status; + } + c->waiting = NULL; + enqueue_cmd_and_start_io(h, c); + /* Don't wait for completion, the reset won't complete. Don't free + * the command either. This is the last command we will send before + * re-initializing everything, so it doesn't matter and won't leak. + */ + return 0; +} + static int fill_cmd(ctlr_info_t *h, CommandList_struct *c, __u8 cmd, void *buff, size_t size, __u8 page_code, unsigned char *scsi3addr, int cmd_type) @@ -3463,6 +3488,63 @@ static inline u32 process_nonindexed_cmd(ctlr_info_t *h, u32 raw_tag) return next_command(h); } +/* Some controllers, like p400, will give us one interrupt + * after a soft reset, even if we turned interrupts off. + * Only need to check for this in the cciss_xxx_discard_completions + * functions. + */ +static int ignore_bogus_interrupt(ctlr_info_t *h) +{ + if (likely(!reset_devices)) + return 0; + + if (likely(h->interrupts_enabled)) + return 0; + + dev_info(&h->pdev->dev, "Received interrupt while interrupts disabled " + "(known firmware bug.) Ignoring.\n"); + + return 1; +} + +static irqreturn_t cciss_intx_discard_completions(int irq, void *dev_id) +{ + ctlr_info_t *h = dev_id; + unsigned long flags; + u32 raw_tag; + + if (ignore_bogus_interrupt(h)) + return IRQ_NONE; + + if (interrupt_not_for_us(h)) + return IRQ_NONE; + spin_lock_irqsave(&h->lock, flags); + while (interrupt_pending(h)) { + raw_tag = get_next_completion(h); + while (raw_tag != FIFO_EMPTY) + raw_tag = next_command(h); + } + spin_unlock_irqrestore(&h->lock, flags); + return IRQ_HANDLED; +} + +static irqreturn_t cciss_msix_discard_completions(int irq, void *dev_id) +{ + ctlr_info_t *h = dev_id; + unsigned long flags; + u32 raw_tag; + + if (ignore_bogus_interrupt(h)) + return IRQ_NONE; + + spin_lock_irqsave(&h->lock, flags); + raw_tag = get_next_completion(h); + while (raw_tag != FIFO_EMPTY) + raw_tag = next_command(h); + spin_unlock_irqrestore(&h->lock, flags); + return IRQ_HANDLED; +} + static irqreturn_t do_cciss_intx(int irq, void *dev_id) { ctlr_info_t *h = dev_id; @@ -4380,7 +4462,6 @@ static __devinit int cciss_message(struct pci_dev *pdev, unsigned char opcode, u return 0; } -#define cciss_soft_reset_controller(p) cciss_message(p, 1, 0) #define cciss_noop(p) cciss_message(p, 3, 0) static int cciss_controller_hard_reset(struct pci_dev *pdev, @@ -4591,13 +4672,17 @@ static __devinit int cciss_kdump_hard_reset_controller(struct pci_dev *pdev) /* Wait for board to become not ready, then ready. */ dev_info(&pdev->dev, "Waiting for board to reset.\n"); rc = cciss_wait_for_board_state(pdev, vaddr, BOARD_NOT_READY); - if (rc) /* Don't bail, might be E500, etc. which can't be reset */ - dev_warn(&pdev->dev, - "failed waiting for board to reset\n"); + if (rc) { + dev_warn(&pdev->dev, "Failed waiting for board to hard reset." + " Will try soft reset.\n"); + rc = -ENOTSUPP; /* Not expected, but try soft reset later */ + goto unmap_cfgtable; + } rc = cciss_wait_for_board_state(pdev, vaddr, BOARD_READY); if (rc) { dev_warn(&pdev->dev, - "failed waiting for board to become ready\n"); + "failed waiting for board to become ready " + "after hard reset\n"); goto unmap_cfgtable; } @@ -4605,16 +4690,13 @@ static __devinit int cciss_kdump_hard_reset_controller(struct pci_dev *pdev) if (rc < 0) goto unmap_cfgtable; if (rc) { - dev_warn(&pdev->dev, "Unable to successfully reset controller," - " Ignoring controller.\n"); - rc = -ENODEV; - goto unmap_cfgtable; + dev_warn(&pdev->dev, "Unable to successfully hard reset " + "controller. Will try soft reset.\n"); + rc = -ENOTSUPP; /* Not expected, but try soft reset later */ } else { - dev_info(&pdev->dev, "board ready.\n"); + dev_info(&pdev->dev, "Board ready after hard reset.\n"); } - dev_info(&pdev->dev, "board ready.\n"); - unmap_cfgtable: iounmap(cfgtable); @@ -4639,7 +4721,7 @@ static __devinit int cciss_init_reset_devices(struct pci_dev *pdev) * due to concerns about shared bbwc between 6402/6404 pair. */ if (rc == -ENOTSUPP) - return 0; /* just try to do the kdump anyhow. */ + return rc; /* just try to do the kdump anyhow. */ if (rc) return -ENODEV; @@ -4745,6 +4827,60 @@ static int cciss_request_irq(ctlr_info_t *h, return -1; } +static int __devinit cciss_kdump_soft_reset(ctlr_info_t *h) +{ + if (cciss_send_reset(h, CTLR_LUNID, CCISS_RESET_TYPE_CONTROLLER)) { + dev_warn(&h->pdev->dev, "Resetting array controller failed.\n"); + return -EIO; + } + + dev_info(&h->pdev->dev, "Waiting for board to soft reset.\n"); + if (cciss_wait_for_board_state(h->pdev, h->vaddr, BOARD_NOT_READY)) { + dev_warn(&h->pdev->dev, "Soft reset had no effect.\n"); + return -1; + } + + dev_info(&h->pdev->dev, "Board reset, awaiting READY status.\n"); + if (cciss_wait_for_board_state(h->pdev, h->vaddr, BOARD_READY)) { + dev_warn(&h->pdev->dev, "Board failed to become ready " + "after soft reset.\n"); + return -1; + } + + return 0; +} + +static void cciss_undo_allocations_after_kdump_soft_reset(ctlr_info_t *h) +{ + int ctlr = h->ctlr; + + free_irq(h->intr[PERF_MODE_INT], h); +#ifdef CONFIG_PCI_MSI + if (h->msix_vector) + pci_disable_msix(h->pdev); + else if (h->msi_vector) + pci_disable_msi(h->pdev); +#endif /* CONFIG_PCI_MSI */ + cciss_free_sg_chain_blocks(h->cmd_sg_list, h->nr_cmds); + cciss_free_scatterlists(h); + cciss_free_cmd_pool(h); + kfree(h->blockFetchTable); + if (h->reply_pool) + pci_free_consistent(h->pdev, h->max_commands * sizeof(__u64), + h->reply_pool, h->reply_pool_dhandle); + if (h->transtable) + iounmap(h->transtable); + if (h->cfgtable) + iounmap(h->cfgtable); + if (h->vaddr) + iounmap(h->vaddr); + unregister_blkdev(h->major, h->devname); + cciss_destroy_hba_sysfs_entry(h); + pci_release_regions(h->pdev); + kfree(h); + hba[ctlr] = NULL; +} + /* * This is it. Find all the controllers and register them. I really hate * stealing all these major device numbers. @@ -4756,13 +4892,27 @@ static int __devinit cciss_init_one(struct pci_dev *pdev, int i; int j = 0; int rc; + int try_soft_reset = 0; int dac, return_code; InquiryData_struct *inq_buff; ctlr_info_t *h; + unsigned long flags; rc = cciss_init_reset_devices(pdev); - if (rc) - return rc; + if (rc) { + if (rc != -ENOTSUPP) + return rc; + /* If the reset fails in a particular way (it has no way to do + * a proper hard reset, so returns -ENOTSUPP) we can try to do + * a soft reset once we get the controller configured up to the + * point that it can accept a command. + */ + try_soft_reset = 1; + rc = 0; + } + +reinit_after_soft_reset: + i = alloc_cciss_hba(pdev); if (i < 0) return -1; @@ -4852,6 +5002,62 @@ static int __devinit cciss_init_one(struct pci_dev *pdev, h->gendisk[j] = NULL; } + /* At this point, the controller is ready to take commands. + * Now, if reset_devices and the hard reset didn't work, try + * the soft reset and see if that works. + */ + if (try_soft_reset) { + + /* This is kind of gross. We may or may not get a completion + * from the soft reset command, and if we do, then the value + * from the fifo may or may not be valid. So, we wait 10 secs + * after the reset throwing away any completions we get during + * that time. Unregister the interrupt handler and register + * fake ones to scoop up any residual completions. + */ + spin_lock_irqsave(&h->lock, flags); + h->access.set_intr_mask(h, CCISS_INTR_OFF); + spin_unlock_irqrestore(&h->lock, flags); + free_irq(h->intr[PERF_MODE_INT], h); + rc = cciss_request_irq(h, cciss_msix_discard_completions, + cciss_intx_discard_completions); + if (rc) { + dev_warn(&h->pdev->dev, "Failed to request_irq after " + "soft reset.\n"); + goto clean4; + } + + rc = cciss_kdump_soft_reset(h); + if (rc) { + dev_warn(&h->pdev->dev, "Soft reset failed.\n"); + goto clean4; + } + + dev_info(&h->pdev->dev, "Board READY.\n"); + dev_info(&h->pdev->dev, + "Waiting for stale completions to drain.\n"); + h->access.set_intr_mask(h, CCISS_INTR_ON); + msleep(10000); + h->access.set_intr_mask(h, CCISS_INTR_OFF); + + rc = controller_reset_failed(h->cfgtable); + if (rc) + dev_info(&h->pdev->dev, + "Soft reset appears to have failed.\n"); + + /* since the controller's reset, we have to go back and re-init + * everything. Easiest to just forget what we've done and do it + * all over again. + */ + cciss_undo_allocations_after_kdump_soft_reset(h); + try_soft_reset = 0; + if (rc) + /* don't go to clean4, we already unallocated */ + return -ENODEV; + + goto reinit_after_soft_reset; + } + cciss_scsi_setup(h); /* Turn the interrupts on so we can service requests */ -- cgit v1.1