From fe7173c206de63fc28475ee6ae42ff95c05692de Mon Sep 17 00:00:00 2001 From: Hannes Reinecke Date: Fri, 27 Mar 2015 16:46:36 +0100 Subject: libata: Implement support for sense data reporting ACS-4 defines a sense data reporting feature set. This patch implements support for it. Signed-off-by: Hannes Reinecke Signed-off-by: Tejun Heo --- drivers/ata/libata-core.c | 20 ++++++++++- drivers/ata/libata-eh.c | 86 +++++++++++++++++++++++++++++++++++++++++++++-- 2 files changed, 102 insertions(+), 4 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 4c35f08..aebb7e3 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -2144,6 +2144,24 @@ static int ata_dev_config_ncq(struct ata_device *dev, return 0; } +static void ata_dev_config_sense_reporting(struct ata_device *dev) +{ + unsigned int err_mask; + + if (!ata_id_has_sense_reporting(dev->id)) + return; + + if (ata_id_sense_reporting_enabled(dev->id)) + return; + + err_mask = ata_dev_set_feature(dev, SETFEATURE_SENSE_DATA, 0x1); + if (err_mask) { + ata_dev_dbg(dev, + "failed to enable Sense Data Reporting, Emask 0x%x\n", + err_mask); + } +} + /** * ata_dev_configure - Configure the specified ATA/ATAPI device * @dev: Target device to configure @@ -2366,7 +2384,7 @@ int ata_dev_configure(struct ata_device *dev) dev->devslp_timing[i] = sata_setting[j]; } } - + ata_dev_config_sense_reporting(dev); dev->cdb_len = 16; } diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index c9b1994..9fa81d9 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -1618,6 +1618,70 @@ unsigned int atapi_eh_tur(struct ata_device *dev, u8 *r_sense_key) } /** + * ata_eh_request_sense - perform REQUEST_SENSE_DATA_EXT + * @dev: device to perform REQUEST_SENSE_SENSE_DATA_EXT to + * @sense_buf: result sense data buffer (SCSI_SENSE_BUFFERSIZE bytes long) + * @dfl_sense_key: default sense key to use + * + * Perform REQUEST_SENSE_DATA_EXT after the device reported CHECK + * SENSE. This function is EH helper. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * encoded sense data on success, 0 on failure or if sense data + * is not available. + */ +static u32 ata_eh_request_sense(struct ata_queued_cmd *qc, + struct scsi_cmnd *cmd) +{ + struct ata_device *dev = qc->dev; + struct ata_taskfile tf; + unsigned int err_mask; + + if (!cmd) + return 0; + + DPRINTK("ATA request sense\n"); + ata_dev_warn(dev, "request sense\n"); + if (!ata_id_sense_reporting_enabled(dev->id)) { + ata_dev_warn(qc->dev, "sense data reporting disabled\n"); + return 0; + } + ata_tf_init(dev, &tf); + + tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; + tf.flags |= ATA_TFLAG_LBA | ATA_TFLAG_LBA48; + tf.command = ATA_CMD_REQ_SENSE_DATA; + tf.protocol = ATA_PROT_NODATA; + + err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0); + /* + * ACS-4 states: + * The device may set the SENSE DATA AVAILABLE bit to one in the + * STATUS field and clear the ERROR bit to zero in the STATUS field + * to indicate that the command returned completion without an error + * and the sense data described in table 306 is available. + * + * IOW the 'ATA_SENSE' bit might not be set even though valid + * sense data is available. + * So check for both. + */ + if ((tf.command & ATA_SENSE) || + tf.lbah != 0 || tf.lbam != 0 || tf.lbal != 0) { + ata_scsi_set_sense(cmd, tf.lbah, tf.lbam, tf.lbal); + qc->flags |= ATA_QCFLAG_SENSE_VALID; + ata_dev_warn(dev, "sense data %02x/%02x/%02x\n", + tf.lbah, tf.lbam, tf.lbal); + } else { + ata_dev_warn(dev, "request sense failed stat %02x emask %x\n", + tf.command, err_mask); + } + return err_mask; +} + +/** * atapi_eh_request_sense - perform ATAPI REQUEST_SENSE * @dev: device to perform REQUEST_SENSE to * @sense_buf: result sense data buffer (SCSI_SENSE_BUFFERSIZE bytes long) @@ -1820,7 +1884,22 @@ static unsigned int ata_eh_analyze_tf(struct ata_queued_cmd *qc, return ATA_EH_RESET; } - /* Set by NCQ autosense */ + /* + * Sense data reporting does not work if the + * device fault bit is set. + */ + if ((stat & ATA_SENSE) && !(stat & ATA_DF) && + !(qc->flags & ATA_QCFLAG_SENSE_VALID)) { + if (!(qc->ap->pflags & ATA_PFLAG_FROZEN)) { + tmp = ata_eh_request_sense(qc, qc->scsicmd); + if (tmp) + qc->err_mask |= tmp; + } else { + ata_dev_warn(qc->dev, "sense data available but port frozen\n"); + } + } + + /* Set by NCQ autosense or request sense above */ if (qc->flags & ATA_QCFLAG_SENSE_VALID) return 0; @@ -2566,14 +2645,15 @@ static void ata_eh_link_report(struct ata_link *link) #ifdef CONFIG_ATA_VERBOSE_ERROR if (res->command & (ATA_BUSY | ATA_DRDY | ATA_DF | ATA_DRQ | - ATA_ERR)) { + ATA_SENSE | ATA_ERR)) { if (res->command & ATA_BUSY) ata_dev_err(qc->dev, "status: { Busy }\n"); else - ata_dev_err(qc->dev, "status: { %s%s%s%s}\n", + ata_dev_err(qc->dev, "status: { %s%s%s%s%s}\n", res->command & ATA_DRDY ? "DRDY " : "", res->command & ATA_DF ? "DF " : "", res->command & ATA_DRQ ? "DRQ " : "", + res->command & ATA_SENSE ? "SENSE " : "", res->command & ATA_ERR ? "ERR " : ""); } -- cgit v1.1