From b1314e3f85b36ce1311d7242085f6dd93709c694 Mon Sep 17 00:00:00 2001 From: Radha Mohan Chintakuntla Date: Tue, 10 Oct 2017 22:37:51 -0700 Subject: ahci: Add support for Cavium's fifth generation SATA controller This patch adds support for Cavium's fifth generation SATA controller. It is an on-chip controller and complies with AHCI 1.3.1. As the controller uses 64-bit addresses it cannot use the standard AHCI BAR5 and so uses BAR4. Signed-off-by: Radha Mohan Chintakuntla Signed-off-by: Tejun Heo --- drivers/ata/ahci.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index cb9b0e9..6e26c1c 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -57,6 +57,7 @@ enum { AHCI_PCI_BAR_STA2X11 = 0, AHCI_PCI_BAR_CAVIUM = 0, AHCI_PCI_BAR_ENMOTUS = 2, + AHCI_PCI_BAR_CAVIUM_GEN5 = 4, AHCI_PCI_BAR_STANDARD = 5, }; @@ -1567,8 +1568,12 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) ahci_pci_bar = AHCI_PCI_BAR_STA2X11; else if (pdev->vendor == 0x1c44 && pdev->device == 0x8000) ahci_pci_bar = AHCI_PCI_BAR_ENMOTUS; - else if (pdev->vendor == 0x177d && pdev->device == 0xa01c) - ahci_pci_bar = AHCI_PCI_BAR_CAVIUM; + else if (pdev->vendor == PCI_VENDOR_ID_CAVIUM) { + if (pdev->device == 0xa01c) + ahci_pci_bar = AHCI_PCI_BAR_CAVIUM; + if (pdev->device == 0xa084) + ahci_pci_bar = AHCI_PCI_BAR_CAVIUM_GEN5; + } /* acquire resources */ rc = pcim_enable_device(pdev); -- cgit v1.1