From 5f33b3bcd7aac66a51e6bfaf35e8cff4eabafb06 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Mon, 1 Jun 2009 22:42:10 +0300 Subject: pata_efar: fix PIO2 underclocking Fix the PIO mode 2 using mode 0 timings -- this driver should enable the fast timing bank starting with PIO2, just like the PIIX/ICH drivers do. Also, fix/rephrase some comments while at it. Signed-off-by: Sergei Shtylyov Signed-off-by: Jeff Garzik --- drivers/ata/pata_efar.c | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c index 2085e0a..2a6412f 100644 --- a/drivers/ata/pata_efar.c +++ b/drivers/ata/pata_efar.c @@ -22,7 +22,7 @@ #include #define DRV_NAME "pata_efar" -#define DRV_VERSION "0.4.4" +#define DRV_VERSION "0.4.5" /** * efar_pre_reset - Enable bits @@ -98,18 +98,17 @@ static void efar_set_piomode (struct ata_port *ap, struct ata_device *adev) { 2, 1 }, { 2, 3 }, }; - if (pio > 2) - control |= 1; /* TIME1 enable */ + if (pio > 1) + control |= 1; /* TIME */ if (ata_pio_need_iordy(adev)) /* PIO 3/4 require IORDY */ - control |= 2; /* IE enable */ - /* Intel specifies that the PPE functionality is for disk only */ + control |= 2; /* IE */ + /* Intel specifies that the prefetch/posting is for disk only */ if (adev->class == ATA_DEV_ATA) - control |= 4; /* PPE enable */ + control |= 4; /* PPE */ pci_read_config_word(dev, idetm_port, &idetm_data); - /* Enable PPE, IE and TIME as appropriate */ - + /* Set PPE, IE, and TIME as appropriate */ if (adev->devno == 0) { idetm_data &= 0xCCF0; idetm_data |= control; @@ -129,7 +128,7 @@ static void efar_set_piomode (struct ata_port *ap, struct ata_device *adev) pci_write_config_byte(dev, 0x44, slave_data); } - idetm_data |= 0x4000; /* Ensure SITRE is enabled */ + idetm_data |= 0x4000; /* Ensure SITRE is set */ pci_write_config_word(dev, idetm_port, idetm_data); } -- cgit v1.1