From 87809942d3fa60bafb7a58d0bdb1c79e90a6821d Mon Sep 17 00:00:00 2001 From: Michele Baldessari Date: Mon, 25 Nov 2013 19:00:14 +0000 Subject: libata: add ATA_HORKAGE_BROKEN_FPDMA_AA quirk for Seagate Momentus SpinPoint M8 We've received multiple reports in Fedora via (BZ 907193) that the Seagate Momentus SpinPoint M8 errors out when enabling AA: [ 2.555905] ata2.00: failed to enable AA (error_mask=0x1) [ 2.568482] ata2.00: failed to enable AA (error_mask=0x1) Add the ATA_HORKAGE_BROKEN_FPDMA_AA for this specific harddisk. Reported-by: Nicholas Signed-off-by: Michele Baldessari Tested-by: Nicholas Acked-by: Alan Cox Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org --- drivers/ata/libata-core.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/ata') diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 75b9367..dae73ef 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4156,6 +4156,9 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "ST3320[68]13AS", "SD1[5-9]", ATA_HORKAGE_NONCQ | ATA_HORKAGE_FIRMWARE_WARN }, + /* Seagate Momentus SpinPoint M8 seem to have FPMDA_AA issues */ + { "ST1000LM024 HN-M101MBB", "2AR10001", ATA_HORKAGE_BROKEN_FPDMA_AA }, + /* Blacklist entries taken from Silicon Image 3124/3132 Windows driver .inf file - also several Linux problem reports */ { "HTS541060G9SA00", "MB3OC60D", ATA_HORKAGE_NONCQ, }, -- cgit v1.1 From 10becdb402af4fd4808a0491a726b96128c41076 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Mon, 25 Nov 2013 09:47:00 +0100 Subject: ahci: imx: Explicitly clear IMX6Q_GPR13_SATA_MPLL_CLK_EN We must clear this IMX6Q_GPR13_SATA_MPLL_CLK_EN bit on i.MX6Q, otherwise Linux will fail to find the attached drive on some boards. This entire fix was: Reported-by: Eric Nelson Signed-off-by: Marek Vasut Reviewed-by: Shawn Guo Cc: Richard Zhu Cc: Linux-IDE Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org --- drivers/ata/ahci_imx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/ata') diff --git a/drivers/ata/ahci_imx.c b/drivers/ata/ahci_imx.c index ae2d73f..3e23e99 100644 --- a/drivers/ata/ahci_imx.c +++ b/drivers/ata/ahci_imx.c @@ -113,7 +113,7 @@ static int imx6q_sata_init(struct device *dev, void __iomem *mmio) /* * set PHY Paremeters, two steps to configure the GPR13, * one write for rest of parameters, mask of first write - * is 0x07fffffd, and the other one write for setting + * is 0x07ffffff, and the other one write for setting * the mpll_clk_en. */ regmap_update_bits(imxpriv->gpr, 0x34, IMX6Q_GPR13_SATA_RX_EQ_VAL_MASK @@ -124,6 +124,7 @@ static int imx6q_sata_init(struct device *dev, void __iomem *mmio) | IMX6Q_GPR13_SATA_TX_ATTEN_MASK | IMX6Q_GPR13_SATA_TX_BOOST_MASK | IMX6Q_GPR13_SATA_TX_LVL_MASK + | IMX6Q_GPR13_SATA_MPLL_CLK_EN | IMX6Q_GPR13_SATA_TX_EDGE_RATE , IMX6Q_GPR13_SATA_RX_EQ_VAL_3_0_DB | IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA2M -- cgit v1.1 From 6fec88712cea016b1fc929fee53f67e3993194a6 Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Mon, 16 Dec 2013 11:34:21 +0100 Subject: ahci: bail out on ICH6 before using AHCI BAR The check for "combined mode" (which disables ahci support) on ICH6 is done after the first use of AHCI BAR. But if ahci is not enabled AHCI BAR is initialized to 0x00000000. (At least it is on the ICH6-M I tested this on. If I understand the datasheet correctly it should also be on ICH6R.) This apparently makes the call of pcim_iomap_regions_request_all() return -EINVAL. And we end up with ahci: probe of 0000:00:1f.2 failed with error -22 (at warning level) in the logs. So check for "combined mode" before calling pcim_iomap_regions_request_all(). Signed-off-by: Paul Bolle Signed-off-by: Tejun Heo --- drivers/ata/ahci.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 14f1e95..c0ed4f27 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -1238,15 +1238,6 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) if (rc) return rc; - /* AHCI controllers often implement SFF compatible interface. - * Grab all PCI BARs just in case. - */ - rc = pcim_iomap_regions_request_all(pdev, 1 << ahci_pci_bar, DRV_NAME); - if (rc == -EBUSY) - pcim_pin_device(pdev); - if (rc) - return rc; - if (pdev->vendor == PCI_VENDOR_ID_INTEL && (pdev->device == 0x2652 || pdev->device == 0x2653)) { u8 map; @@ -1263,6 +1254,15 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) } } + /* AHCI controllers often implement SFF compatible interface. + * Grab all PCI BARs just in case. + */ + rc = pcim_iomap_regions_request_all(pdev, 1 << ahci_pci_bar, DRV_NAME); + if (rc == -EBUSY) + pcim_pin_device(pdev); + if (rc) + return rc; + hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL); if (!hpriv) return -ENOMEM; -- cgit v1.1 From b8bd6dc36186fe99afa7b73e9e2d9a98ad5c4865 Mon Sep 17 00:00:00 2001 From: "Robin H. Johnson" Date: Mon, 16 Dec 2013 09:31:19 -0800 Subject: libata: disable a disk via libata.force params A user on StackExchange had a failing SSD that's soldered directly onto the motherboard of his system. The BIOS does not give any option to disable it at all, so he can't just hide it from the OS via the BIOS. The old IDE layer had hdX=noprobe override for situations like this, but that was never ported to the libata layer. This patch implements a disable flag for libata.force. Example use: libata.force=2.0:disable [v2 of the patch, removed the nodisable flag per Tejun Heo] Signed-off-by: Robin H. Johnson Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org Link: http://unix.stackexchange.com/questions/102648/how-to-tell-linux-kernel-3-0-to-completely-ignore-a-failing-disk Link: http://askubuntu.com/questions/352836/how-can-i-tell-linux-kernel-to-completely-ignore-a-disk-as-if-it-was-not-even-co Link: http://superuser.com/questions/599333/how-to-disable-kernel-probing-for-drive --- drivers/ata/libata-core.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/ata') diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index dae73ef..ff01584 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -6522,6 +6522,7 @@ static int __init ata_parse_force_one(char **cur, { "norst", .lflags = ATA_LFLAG_NO_HRST | ATA_LFLAG_NO_SRST }, { "rstonce", .lflags = ATA_LFLAG_RST_ONCE }, { "atapi_dmadir", .horkage_on = ATA_HORKAGE_ATAPI_DMADIR }, + { "disable", .horkage_on = ATA_HORKAGE_DISABLE }, }; char *start = *cur, *p = *cur; char *id, *val, *endp; -- cgit v1.1 From f78dea064c5f7de07de4912a6e5136dbc443d614 Mon Sep 17 00:00:00 2001 From: Marc Carino Date: Mon, 16 Dec 2013 18:15:53 -0800 Subject: libata: implement ATA_HORKAGE_NO_NCQ_TRIM and apply it to Micro M500 SSDs Certain drives cannot handle queued TRIM commands properly, even though support is indicated in the IDENTIFY DEVICE buffer. This patch allows for disabling the commands for the affected drives and apply it to the Micron/Crucial M500 SSDs which exhibit incorrect protocol behavior when issued queued TRIM commands, which could lead to silent data corruption. tj: Merged two unnecessarily split patches and made minor edits including shortening horkage name. Signed-off-by: Marc Carino Signed-off-by: Tejun Heo Link: http://lkml.kernel.org/g/1387246554-7311-1-git-send-email-marc.ceeeee@gmail.com Cc: stable@vger.kernel.org # 3.12+ --- drivers/ata/libata-core.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index ff01584..1393a58 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -2149,9 +2149,16 @@ static int ata_dev_config_ncq(struct ata_device *dev, "failed to get NCQ Send/Recv Log Emask 0x%x\n", err_mask); } else { + u8 *cmds = dev->ncq_send_recv_cmds; + dev->flags |= ATA_DFLAG_NCQ_SEND_RECV; - memcpy(dev->ncq_send_recv_cmds, ap->sector_buf, - ATA_LOG_NCQ_SEND_RECV_SIZE); + memcpy(cmds, ap->sector_buf, ATA_LOG_NCQ_SEND_RECV_SIZE); + + if (dev->horkage & ATA_HORKAGE_NO_NCQ_TRIM) { + ata_dev_dbg(dev, "disabling queued TRIM support\n"); + cmds[ATA_LOG_NCQ_SEND_RECV_DSM_OFFSET] &= + ~ATA_LOG_NCQ_SEND_RECV_DSM_TRIM; + } } } @@ -4205,6 +4212,10 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "PIONEER DVD-RW DVR-212D", NULL, ATA_HORKAGE_NOSETXFER }, { "PIONEER DVD-RW DVR-216D", NULL, ATA_HORKAGE_NOSETXFER }, + /* devices that don't properly handle queued TRIM commands */ + { "Micron_M500*", NULL, ATA_HORKAGE_NO_NCQ_TRIM, }, + { "Crucial_CT???M500SSD1", NULL, ATA_HORKAGE_NO_NCQ_TRIM, }, + /* End Marker */ { } }; -- cgit v1.1 From 85fbd722ad0f5d64d1ad15888cd1eb2188bfb557 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 18 Dec 2013 07:07:32 -0500 Subject: libata, freezer: avoid block device removal while system is frozen MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Freezable kthreads and workqueues are fundamentally problematic in that they effectively introduce a big kernel lock widely used in the kernel and have already been the culprit of several deadlock scenarios. This is the latest occurrence. During resume, libata rescans all the ports and revalidates all pre-existing devices. If it determines that a device has gone missing, the device is removed from the system which involves invalidating block device and flushing bdi while holding driver core layer locks. Unfortunately, this can race with the rest of device resume. Because freezable kthreads and workqueues are thawed after device resume is complete and block device removal depends on freezable workqueues and kthreads (e.g. bdi_wq, jbd2) to make progress, this can lead to deadlock - block device removal can't proceed because kthreads are frozen and kthreads can't be thawed because device resume is blocked behind block device removal. 839a8e8660b6 ("writeback: replace custom worker pool implementation with unbound workqueue") made this particular deadlock scenario more visible but the underlying problem has always been there - the original forker task and jbd2 are freezable too. In fact, this is highly likely just one of many possible deadlock scenarios given that freezer behaves as a big kernel lock and we don't have any debug mechanism around it. I believe the right thing to do is getting rid of freezable kthreads and workqueues. This is something fundamentally broken. For now, implement a funny workaround in libata - just avoid doing block device hot[un]plug while the system is frozen. Kernel engineering at its finest. :( v2: Add EXPORT_SYMBOL_GPL(pm_freezing) for cases where libata is built as a module. v3: Comment updated and polling interval changed to 10ms as suggested by Rafael. v4: Add #ifdef CONFIG_FREEZER around the hack as pm_freezing is not defined when FREEZER is not configured thus breaking build. Reported by kbuild test robot. Signed-off-by: Tejun Heo Reported-by: Tomaž Šolc Reviewed-by: "Rafael J. Wysocki" Link: https://bugzilla.kernel.org/show_bug.cgi?id=62801 Link: http://lkml.kernel.org/r/20131213174932.GA27070@htj.dyndns.org Cc: Greg Kroah-Hartman Cc: Len Brown Cc: Oleg Nesterov Cc: stable@vger.kernel.org Cc: kbuild test robot --- drivers/ata/libata-scsi.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'drivers/ata') diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index db6dfcf..176f629 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -3871,6 +3871,27 @@ void ata_scsi_hotplug(struct work_struct *work) return; } + /* + * XXX - UGLY HACK + * + * The block layer suspend/resume path is fundamentally broken due + * to freezable kthreads and workqueue and may deadlock if a block + * device gets removed while resume is in progress. I don't know + * what the solution is short of removing freezable kthreads and + * workqueues altogether. + * + * The following is an ugly hack to avoid kicking off device + * removal while freezer is active. This is a joke but does avoid + * this particular deadlock scenario. + * + * https://bugzilla.kernel.org/show_bug.cgi?id=62801 + * http://marc.info/?l=linux-kernel&m=138695698516487 + */ +#ifdef CONFIG_FREEZER + while (pm_freezing) + msleep(10); +#endif + DPRINTK("ENTER\n"); mutex_lock(&ap->scsi_scan_mutex); -- cgit v1.1