From 1b2c357c301b76118973763e886d9f70a7f50f7e Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 5 Jan 2009 14:13:22 +0000 Subject: pata_ali: force initialise a few bits We can't assume some of the setup here on non x86 boxes. Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/pata_ali.c | 71 +++++++++++++++++++++++++++----------------------- 1 file changed, 38 insertions(+), 33 deletions(-) (limited to 'drivers/ata/pata_ali.c') diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c index 73c466e..d2ea2db 100644 --- a/drivers/ata/pata_ali.c +++ b/drivers/ata/pata_ali.c @@ -19,7 +19,9 @@ * * TODO/CHECK * Cannot have ATAPI on both master & slave for rev < c2 (???) but - * otherwise should do atapi DMA. + * otherwise should do atapi DMA (For now for old we do PIO only for + * ATAPI) + * Review Sunblade workaround. */ #include @@ -33,12 +35,14 @@ #include #define DRV_NAME "pata_ali" -#define DRV_VERSION "0.7.5" +#define DRV_VERSION "0.7.7" static int ali_atapi_dma = 0; module_param_named(atapi_dma, ali_atapi_dma, int, 0644); MODULE_PARM_DESC(atapi_dma, "Enable ATAPI DMA (0=disable, 1=enable)"); +static struct pci_dev *isa_bridge; + /* * Cable special cases */ @@ -401,52 +405,49 @@ static struct ata_port_operations ali_c5_port_ops = { static void ali_init_chipset(struct pci_dev *pdev) { u8 tmp; - struct pci_dev *north, *isa_bridge; + struct pci_dev *north; /* * The chipset revision selects the driver operations and * mode data. */ - if (pdev->revision >= 0x20 && pdev->revision < 0xC2) { - /* 1543-E/F, 1543C-C, 1543C-D, 1543C-E */ - pci_read_config_byte(pdev, 0x4B, &tmp); - /* Clear CD-ROM DMA write bit */ - tmp &= 0x7F; - pci_write_config_byte(pdev, 0x4B, tmp); - } else if (pdev->revision >= 0xC2) { - /* Enable cable detection logic */ + if (pdev->revision <= 0x20) { + pci_read_config_byte(pdev, 0x53, &tmp); + tmp |= 0x03; + pci_write_config_byte(pdev, 0x53, tmp); + } else { + pci_read_config_byte(pdev, 0x4a, &tmp); + pci_write_config_byte(pdev, 0x4a, tmp | 0x20); pci_read_config_byte(pdev, 0x4B, &tmp); - pci_write_config_byte(pdev, 0x4B, tmp | 0x08); - } - north = pci_get_bus_and_slot(0, PCI_DEVFN(0,0)); - isa_bridge = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL); - - if (north && north->vendor == PCI_VENDOR_ID_AL && isa_bridge) { - /* Configure the ALi bridge logic. For non ALi rely on BIOS. - Set the south bridge enable bit */ - pci_read_config_byte(isa_bridge, 0x79, &tmp); - if (pdev->revision == 0xC2) - pci_write_config_byte(isa_bridge, 0x79, tmp | 0x04); - else if (pdev->revision > 0xC2 && pdev->revision < 0xC5) - pci_write_config_byte(isa_bridge, 0x79, tmp | 0x02); - } - if (pdev->revision >= 0x20) { + if (pdev->revision < 0xC2) + /* 1543-E/F, 1543C-C, 1543C-D, 1543C-E */ + /* Clear CD-ROM DMA write bit */ + tmp &= 0x7F; + /* Cable and UDMA */ + pci_write_config_byte(pdev, 0x4B, tmp | 0x09); /* * CD_ROM DMA on (0x53 bit 0). Enable this even if we want * to use PIO. 0x53 bit 1 (rev 20 only) - enable FIFO control * via 0x54/55. */ pci_read_config_byte(pdev, 0x53, &tmp); - if (pdev->revision <= 0x20) - tmp &= ~0x02; if (pdev->revision >= 0xc7) tmp |= 0x03; else tmp |= 0x01; /* CD_ROM enable for DMA */ pci_write_config_byte(pdev, 0x53, tmp); } - pci_dev_put(isa_bridge); + north = pci_get_bus_and_slot(0, PCI_DEVFN(0,0)); + if (north && north->vendor == PCI_VENDOR_ID_AL && isa_bridge) { + /* Configure the ALi bridge logic. For non ALi rely on BIOS. + Set the south bridge enable bit */ + pci_read_config_byte(isa_bridge, 0x79, &tmp); + if (pdev->revision == 0xC2) + pci_write_config_byte(isa_bridge, 0x79, tmp | 0x04); + else if (pdev->revision > 0xC2 && pdev->revision < 0xC5) + pci_write_config_byte(isa_bridge, 0x79, tmp | 0x02); + } pci_dev_put(north); ata_pci_bmdma_clear_simplex(pdev); } @@ -516,7 +517,6 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) const struct ata_port_info *ppi[] = { NULL, NULL }; u8 tmp; - struct pci_dev *isa_bridge; int rc; rc = pcim_enable_device(pdev); @@ -543,14 +543,12 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) ali_init_chipset(pdev); - isa_bridge = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL); if (isa_bridge && pdev->revision >= 0x20 && pdev->revision < 0xC2) { /* Are we paired with a UDMA capable chip */ pci_read_config_byte(isa_bridge, 0x5E, &tmp); if ((tmp & 0x1E) == 0x12) ppi[0] = &info_20_udma; } - pci_dev_put(isa_bridge); return ata_pci_sff_init_one(pdev, ppi, &ali_sht, NULL); } @@ -590,13 +588,20 @@ static struct pci_driver ali_pci_driver = { static int __init ali_init(void) { - return pci_register_driver(&ali_pci_driver); + int ret; + isa_bridge = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL); + + ret = pci_register_driver(&ali_pci_driver); + if (ret < 0) + pci_dev_put(isa_bridge); + return ret; } static void __exit ali_exit(void) { pci_unregister_driver(&ali_pci_driver); + pci_dev_put(isa_bridge); } -- cgit v1.1