From 4a5e3638b11978262ab76bbb2062e57fefaaedba Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Tue, 15 Jul 2008 09:42:57 -0600 Subject: ACPI: stop complaints about interrupt link End Tags and blank IRQ descriptors Silently ignore _PRS End Tags. We already ignore Start Dependent Functions in _PRS, and we already ignore End Tags in _CRS, so we might as well ignore End Tags in _PRS as well. Silently ignore _PRS IRQ descriptors that mention no interrupts. The spec allows this (section 6.4.2.1 in ACPI 3.0b spec), and it probably means the interrupt link can't be configured at all. This patch doesn't change any functional behavior; it just removes confusing complaints like these: ACPI: Blank IRQ resource ACPI: Resource is not an IRQ entry when parsing _PRS data "23 00 00 18 79 00" from an IBM xSeries 335 dual Pentium IV Xeon 2.40 GHz machine. For more details, see http://bugzilla.kernel.org/show_bug.cgi?id=11049 The "23 00 00 18" part is a three-byte-long small IRQ resource with no bits set in the IRQ mask ("00 00"), and level-triggered, active low, shareable ("18"). The "79 00" is an End Tag (type 0x7). It is superfluous since there is no Start Dependent Function tag and there are no resources after it, but it is harmless. Thanks to Gabriele Trombetti (aka Kurk) for reporting this and testing the patch. Signed-off-by: Bjorn Helgaas Signed-off-by: Andi Kleen --- drivers/acpi/pci_link.c | 31 ++++++++++++++++++++----------- 1 file changed, 20 insertions(+), 11 deletions(-) (limited to 'drivers/acpi') diff --git a/drivers/acpi/pci_link.c b/drivers/acpi/pci_link.c index 233c40c..89f3b2a 100644 --- a/drivers/acpi/pci_link.c +++ b/drivers/acpi/pci_link.c @@ -113,20 +113,23 @@ acpi_pci_link_check_possible(struct acpi_resource *resource, void *context) switch (resource->type) { case ACPI_RESOURCE_TYPE_START_DEPENDENT: + case ACPI_RESOURCE_TYPE_END_TAG: return AE_OK; case ACPI_RESOURCE_TYPE_IRQ: { struct acpi_resource_irq *p = &resource->data.irq; if (!p || !p->interrupt_count) { - printk(KERN_WARNING PREFIX "Blank IRQ resource\n"); + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "Blank _PRS IRQ resource\n")); return AE_OK; } for (i = 0; (i < p->interrupt_count && i < ACPI_PCI_LINK_MAX_POSSIBLE); i++) { if (!p->interrupts[i]) { - printk(KERN_WARNING PREFIX "Invalid IRQ %d\n", - p->interrupts[i]); + printk(KERN_WARNING PREFIX + "Invalid _PRS IRQ %d\n", + p->interrupts[i]); continue; } link->irq.possible[i] = p->interrupts[i]; @@ -143,15 +146,16 @@ acpi_pci_link_check_possible(struct acpi_resource *resource, void *context) &resource->data.extended_irq; if (!p || !p->interrupt_count) { printk(KERN_WARNING PREFIX - "Blank EXT IRQ resource\n"); + "Blank _PRS EXT IRQ resource\n"); return AE_OK; } for (i = 0; (i < p->interrupt_count && i < ACPI_PCI_LINK_MAX_POSSIBLE); i++) { if (!p->interrupts[i]) { - printk(KERN_WARNING PREFIX "Invalid IRQ %d\n", - p->interrupts[i]); + printk(KERN_WARNING PREFIX + "Invalid _PRS IRQ %d\n", + p->interrupts[i]); continue; } link->irq.possible[i] = p->interrupts[i]; @@ -163,7 +167,8 @@ acpi_pci_link_check_possible(struct acpi_resource *resource, void *context) break; } default: - printk(KERN_ERR PREFIX "Resource is not an IRQ entry\n"); + printk(KERN_ERR PREFIX "_PRS resource type 0x%x isn't an IRQ\n", + resource->type); return AE_OK; } @@ -199,6 +204,9 @@ acpi_pci_link_check_current(struct acpi_resource *resource, void *context) switch (resource->type) { + case ACPI_RESOURCE_TYPE_START_DEPENDENT: + case ACPI_RESOURCE_TYPE_END_TAG: + return AE_OK; case ACPI_RESOURCE_TYPE_IRQ: { struct acpi_resource_irq *p = &resource->data.irq; @@ -208,7 +216,7 @@ acpi_pci_link_check_current(struct acpi_resource *resource, void *context) * particularly those those w/ _STA disabled */ ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Blank IRQ resource\n")); + "Blank _CRS IRQ resource\n")); return AE_OK; } *irq = p->interrupts[0]; @@ -224,7 +232,7 @@ acpi_pci_link_check_current(struct acpi_resource *resource, void *context) * return at least 1 IRQ */ printk(KERN_WARNING PREFIX - "Blank EXT IRQ resource\n"); + "Blank _CRS EXT IRQ resource\n"); return AE_OK; } *irq = p->interrupts[0]; @@ -232,10 +240,11 @@ acpi_pci_link_check_current(struct acpi_resource *resource, void *context) } break; default: - printk(KERN_ERR PREFIX "Resource %d isn't an IRQ\n", resource->type); - case ACPI_RESOURCE_TYPE_END_TAG: + printk(KERN_ERR PREFIX "_CRS resource type 0x%x isn't an IRQ\n", + resource->type); return AE_OK; } + return AE_CTRL_TERMINATE; } -- cgit v1.1 From c2c789057f075022658b38b498755c29c1ba8055 Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Thu, 17 Jul 2008 10:46:05 +0800 Subject: ACPI: Ignore _BQC object when registering backlight device According to acpi spec , the objectes of _BCL and _BCM are required if integrated LCD is present and supports brightness level and the _BQC is the optional object. So the _BQC object will be ignored when the backlight device is registered. At the same time when there is no _BQC object, the current brightness will be set to the maximum. http://bugzilla.kernel.org/show_bug.cgi?id=10206 Signed-off-by: Zhao Yakui Signed-off-by: Zhang Rui Signed-off-by: Andi Kleen --- drivers/acpi/video.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) (limited to 'drivers/acpi') diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 64c8893..e32b6c1 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -741,7 +741,7 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device) max_level = acpi_video_init_brightness(device); - if (device->cap._BCL && device->cap._BCM && device->cap._BQC && max_level > 0){ + if (device->cap._BCL && device->cap._BCM && max_level > 0) { int result; static int count = 0; char *name; @@ -753,7 +753,17 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device) device->backlight = backlight_device_register(name, NULL, device, &acpi_backlight_ops); device->backlight->props.max_brightness = device->brightness->count-3; - device->backlight->props.brightness = acpi_video_get_brightness(device->backlight); + /* + * If there exists the _BQC object, the _BQC object will be + * called to get the current backlight brightness. Otherwise + * the brightness will be set to the maximum. + */ + if (device->cap._BQC) + device->backlight->props.brightness = + acpi_video_get_brightness(device->backlight); + else + device->backlight->props.brightness = + device->backlight->props.max_brightness; backlight_update_status(device->backlight); kfree(name); -- cgit v1.1 From ea51011a27db48ea0a80a5e20de3969b292d5d4d Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Mon, 14 Jul 2008 15:14:03 +0800 Subject: ACPI : Set FAN device to correct state in boot phase Subject:ACPI: Set FAN device to correct state in boot phase From: Zhao Yakui On some laptops when ACPI FAN driver is loaded, maybe the FAN device will be turned on. But if the temperature is below the threshold, the corresponding FAN device should be turned off in the course of loading thermal driver. So it is necessary to set the FAN device to the correct state in course of loading the thermal driver. http://bugzilla.kernel.org/show_bug.cgi?id=8049 Signed-off-by: Zhao Yakui Signed-off-by: Zhang Rui Signed-off-by: Andi Kleen --- drivers/acpi/thermal.c | 43 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+) (limited to 'drivers/acpi') diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index 84c795f..9adfd18 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -769,6 +769,47 @@ static void acpi_thermal_run(unsigned long data) acpi_os_execute(OSL_GPE_HANDLER, acpi_thermal_check, (void *)data); } +static void acpi_thermal_active_off(void *data) +{ + int result = 0; + struct acpi_thermal *tz = data; + int i = 0; + int j = 0; + struct acpi_thermal_active *active = NULL; + + if (!tz) { + printk(KERN_ERR PREFIX "Invalid (NULL) context\n"); + return; + } + + result = acpi_thermal_get_temperature(tz); + if (result) + return; + + for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) { + active = &(tz->trips.active[i]); + if (!active || !active->flags.valid) + break; + if (tz->temperature >= active->temperature) { + /* + * If the thermal temperature is greater than the + * active threshod, unnecessary to turn off the + * the active cooling device. + */ + continue; + } + /* + * Below Threshold? + * ---------------- + * Turn OFF all cooling devices associated with this + * threshold. + */ + for (j = 0; j < active->devices.count; j++) + result = acpi_bus_set_power(active->devices.handles[j], + ACPI_STATE_D3); + } +} + static void acpi_thermal_check(void *data) { int result = 0; @@ -1624,6 +1665,8 @@ static int acpi_thermal_add(struct acpi_device *device) init_timer(&tz->timer); + acpi_thermal_active_off(tz); + acpi_thermal_check(tz); status = acpi_install_notify_handler(device->handle, -- cgit v1.1