From ea51011a27db48ea0a80a5e20de3969b292d5d4d Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Mon, 14 Jul 2008 15:14:03 +0800 Subject: ACPI : Set FAN device to correct state in boot phase Subject:ACPI: Set FAN device to correct state in boot phase From: Zhao Yakui On some laptops when ACPI FAN driver is loaded, maybe the FAN device will be turned on. But if the temperature is below the threshold, the corresponding FAN device should be turned off in the course of loading thermal driver. So it is necessary to set the FAN device to the correct state in course of loading the thermal driver. http://bugzilla.kernel.org/show_bug.cgi?id=8049 Signed-off-by: Zhao Yakui Signed-off-by: Zhang Rui Signed-off-by: Andi Kleen --- drivers/acpi/thermal.c | 43 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+) (limited to 'drivers/acpi/thermal.c') diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index 84c795f..9adfd18 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -769,6 +769,47 @@ static void acpi_thermal_run(unsigned long data) acpi_os_execute(OSL_GPE_HANDLER, acpi_thermal_check, (void *)data); } +static void acpi_thermal_active_off(void *data) +{ + int result = 0; + struct acpi_thermal *tz = data; + int i = 0; + int j = 0; + struct acpi_thermal_active *active = NULL; + + if (!tz) { + printk(KERN_ERR PREFIX "Invalid (NULL) context\n"); + return; + } + + result = acpi_thermal_get_temperature(tz); + if (result) + return; + + for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) { + active = &(tz->trips.active[i]); + if (!active || !active->flags.valid) + break; + if (tz->temperature >= active->temperature) { + /* + * If the thermal temperature is greater than the + * active threshod, unnecessary to turn off the + * the active cooling device. + */ + continue; + } + /* + * Below Threshold? + * ---------------- + * Turn OFF all cooling devices associated with this + * threshold. + */ + for (j = 0; j < active->devices.count; j++) + result = acpi_bus_set_power(active->devices.handles[j], + ACPI_STATE_D3); + } +} + static void acpi_thermal_check(void *data) { int result = 0; @@ -1624,6 +1665,8 @@ static int acpi_thermal_add(struct acpi_device *device) init_timer(&tz->timer); + acpi_thermal_active_off(tz); + acpi_thermal_check(tz); status = acpi_install_notify_handler(device->handle, -- cgit v1.1 From fc3a8828b139c24aade3f9d608775e36c248f8f5 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 2 May 2008 06:02:41 +0200 Subject: driver core: fix a lot of printk usages of bus_id We have the dev_printk() variants for this kind of thing, use them instead of directly trying to access the bus_id field of struct device. This is done in order to remove bus_id entirely. Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/acpi/thermal.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/acpi/thermal.c') diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index 84c795f..30a3413 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -1179,8 +1179,8 @@ static int acpi_thermal_register_thermal_zone(struct acpi_thermal *tz) tz->tz_enabled = 1; - printk(KERN_INFO PREFIX "%s is registered as thermal_zone%d\n", - tz->device->dev.bus_id, tz->thermal_zone->id); + dev_info(&tz->device->dev, "registered as thermal_zone%d\n", + tz->thermal_zone->id); return 0; } -- cgit v1.1 From db89b4f0dbab837d0f3de2c3e9427a8d5393afa3 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Mon, 22 Sep 2008 14:37:34 -0700 Subject: ACPI: catch calls of acpi_driver_data on pointer of wrong type Catch attempts to use of acpi_driver_data on pointers of wrong type. akpm: rewritten to use proper C typechecking and remove the "function"-used-as-lvalue thing. Signed-off-by: Pavel Machek Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- drivers/acpi/thermal.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/acpi/thermal.c') diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index 9127036..e052a75 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -1647,7 +1647,7 @@ static int acpi_thermal_add(struct acpi_device *device) strcpy(tz->name, device->pnp.bus_id); strcpy(acpi_device_name(device), ACPI_THERMAL_DEVICE_NAME); strcpy(acpi_device_class(device), ACPI_THERMAL_CLASS); - acpi_driver_data(device) = tz; + device->driver_data = tz; mutex_init(&tz->lock); -- cgit v1.1 From 27663c5855b10af9ec67bc7dfba001426ba21222 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Fri, 10 Oct 2008 02:22:59 -0400 Subject: ACPI: Change acpi_evaluate_integer to support 64-bit on 32-bit kernels As of version 2.0, ACPI can return 64-bit integers. The current acpi_evaluate_integer only supports 64-bit integers on 64-bit platforms. Change the argument to take a pointer to an acpi_integer so we support 64-bit integers on all platforms. lenb: replaced use of "acpi_integer" with "unsigned long long" lenb: fixed bug in acpi_thermal_trips_update() Signed-off-by: Matthew Wilcox Signed-off-by: Len Brown --- drivers/acpi/thermal.c | 43 +++++++++++++++++++++++++++---------------- 1 file changed, 27 insertions(+), 16 deletions(-) (limited to 'drivers/acpi/thermal.c') diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index 9127036..47abb94 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -246,18 +246,18 @@ static const struct file_operations acpi_thermal_polling_fops = { static int acpi_thermal_get_temperature(struct acpi_thermal *tz) { acpi_status status = AE_OK; - + unsigned long long tmp; if (!tz) return -EINVAL; tz->last_temperature = tz->temperature; - status = - acpi_evaluate_integer(tz->device->handle, "_TMP", NULL, &tz->temperature); + status = acpi_evaluate_integer(tz->device->handle, "_TMP", NULL, &tmp); if (ACPI_FAILURE(status)) return -ENODEV; + tz->temperature = tmp; ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Temperature is %lu dK\n", tz->temperature)); @@ -267,17 +267,16 @@ static int acpi_thermal_get_temperature(struct acpi_thermal *tz) static int acpi_thermal_get_polling_frequency(struct acpi_thermal *tz) { acpi_status status = AE_OK; - + unsigned long long tmp; if (!tz) return -EINVAL; - status = - acpi_evaluate_integer(tz->device->handle, "_TZP", NULL, - &tz->polling_frequency); + status = acpi_evaluate_integer(tz->device->handle, "_TZP", NULL, &tmp); if (ACPI_FAILURE(status)) return -ENODEV; + tz->polling_frequency = tmp; ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Polling frequency is %lu dS\n", tz->polling_frequency)); @@ -356,6 +355,7 @@ do { \ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag) { acpi_status status = AE_OK; + unsigned long long tmp; struct acpi_handle_list devices; int valid = 0; int i; @@ -363,7 +363,8 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag) /* Critical Shutdown (required) */ if (flag & ACPI_TRIPS_CRITICAL) { status = acpi_evaluate_integer(tz->device->handle, - "_CRT", NULL, &tz->trips.critical.temperature); + "_CRT", NULL, &tmp); + tz->trips.critical.temperature = tmp; /* * Treat freezing temperatures as invalid as well; some * BIOSes return really low values and cause reboots at startup. @@ -399,12 +400,13 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag) /* Critical Sleep (optional) */ if (flag & ACPI_TRIPS_HOT) { status = acpi_evaluate_integer(tz->device->handle, - "_HOT", NULL, &tz->trips.hot.temperature); + "_HOT", NULL, &tmp); if (ACPI_FAILURE(status)) { tz->trips.hot.flags.valid = 0; ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No hot threshold\n")); } else { + tz->trips.hot.temperature = tmp; tz->trips.hot.flags.valid = 1; ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found hot threshold [%lu]\n", @@ -418,33 +420,40 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag) if (psv == -1) { status = AE_SUPPORT; } else if (psv > 0) { - tz->trips.passive.temperature = CELSIUS_TO_KELVIN(psv); + tmp = CELSIUS_TO_KELVIN(psv); status = AE_OK; } else { status = acpi_evaluate_integer(tz->device->handle, - "_PSV", NULL, &tz->trips.passive.temperature); + "_PSV", NULL, &tmp); } if (ACPI_FAILURE(status)) tz->trips.passive.flags.valid = 0; else { + tz->trips.passive.temperature = tmp; tz->trips.passive.flags.valid = 1; if (flag == ACPI_TRIPS_INIT) { status = acpi_evaluate_integer( tz->device->handle, "_TC1", - NULL, &tz->trips.passive.tc1); + NULL, &tmp); if (ACPI_FAILURE(status)) tz->trips.passive.flags.valid = 0; + else + tz->trips.passive.tc1 = tmp; status = acpi_evaluate_integer( tz->device->handle, "_TC2", - NULL, &tz->trips.passive.tc2); + NULL, &tmp); if (ACPI_FAILURE(status)) tz->trips.passive.flags.valid = 0; + else + tz->trips.passive.tc2 = tmp; status = acpi_evaluate_integer( tz->device->handle, "_TSP", - NULL, &tz->trips.passive.tsp); + NULL, &tmp); if (ACPI_FAILURE(status)) tz->trips.passive.flags.valid = 0; + else + tz->trips.passive.tsp = tmp; } } } @@ -479,7 +488,7 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag) if (flag & ACPI_TRIPS_ACTIVE) { status = acpi_evaluate_integer(tz->device->handle, - name, NULL, &tz->trips.active[i].temperature); + name, NULL, &tmp); if (ACPI_FAILURE(status)) { tz->trips.active[i].flags.valid = 0; if (i == 0) @@ -500,8 +509,10 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag) tz->trips.active[i - 2].temperature : CELSIUS_TO_KELVIN(act)); break; - } else + } else { + tz->trips.active[i].temperature = tmp; tz->trips.active[i].flags.valid = 1; + } } name[2] = 'L'; -- cgit v1.1 From 22a94d79a34bf010d11996d30eed8ee3fc1a4fbf Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Fri, 17 Oct 2008 02:41:20 -0400 Subject: ACPI: Allow overriding to higher critical trip point. http://bugzilla.kernel.org/show_bug.cgi?id=9129 lenb: Note that overriding a critical trip point may simply fool the user into thinking that they have control that they do not actually have. For it is EC firmware that decides when the EC sends Linux temperature change events, and the EC may or may not decide to send Linux these events anywhere in the neighborhood of the fake override trip points. Beware. note also that thermal.nocrt is already available to disable crtical trip point actios, and thermal.crt=-1 is already available to disabled critical trip points entirely. Signed-off-by: Zhang Rui Signed-off-by: Len Brown --- drivers/acpi/thermal.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers/acpi/thermal.c') diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index e052a75..e9e17df 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -388,10 +388,12 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag) } else if (crt > 0) { unsigned long crt_k = CELSIUS_TO_KELVIN(crt); /* - * Allow override to lower critical threshold + * Allow override critical threshold */ - if (crt_k < tz->trips.critical.temperature) - tz->trips.critical.temperature = crt_k; + if (crt_k > tz->trips.critical.temperature) + printk(KERN_WARNING PREFIX + "Critical threshold %d C\n", crt); + tz->trips.critical.temperature = crt_k; } } } -- cgit v1.1 From 55ac9a018f83e4f42f3c6ce98a8dbda73b985935 Mon Sep 17 00:00:00 2001 From: Lin Ming Date: Sun, 28 Sep 2008 14:51:56 +0800 Subject: ACPI: replace ACPI_DEBUG_PRINT((ACPI_DB_ERROR, ...) with printk ACPI_DB_ERROR and ACPI_DB_WARN were removed from ACPICA core. So replace ACPI_DEBUG_PRINT((ACPI_DB_ERROR, ...) with printk(KERN_ERR PREFIX ...) and ACPI_DEBUG_PRINT((ACPI_DB_WARN, ...) with printk(KERN_WARNING PREFIX ...) We do not use ACPI_ERROR/ACPI_WARNING since they're not exported, see ------------------------------------------------------------- commit 6468463abd7051fcc29f3ee7c931f9bbbb26f5a4 Author: Len Brown Date: Mon Jun 26 23:41:38 2006 -0400 ACPI: un-export ACPI_ERROR() -- use printk(KERN_ERR...) Signed-off-by: Len Brown ------------------------------------------------------------- Signed-off-by: Lin Ming Signed-off-by: Len Brown --- drivers/acpi/thermal.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/acpi/thermal.c') diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index 9127036..263ec08 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -1213,8 +1213,8 @@ static int acpi_thermal_register_thermal_zone(struct acpi_thermal *tz) acpi_bus_private_data_handler, tz->thermal_zone); if (ACPI_FAILURE(status)) { - ACPI_DEBUG_PRINT((ACPI_DB_ERROR, - "Error attaching device data\n")); + printk(KERN_ERR PREFIX + "Error attaching device data\n"); return -ENODEV; } -- cgit v1.1