From f3b0ea6118b43ee6fa97fae7c3a5a63559130140 Mon Sep 17 00:00:00 2001 From: Troy Kisky Date: Mon, 16 Dec 2013 18:12:56 -0700 Subject: ARM: dts: imx6qdl-sabrelite: move phy reset to pinctrl_enet This patch moves pin EIM_D23 (phy reset) from pinctrl_hog to pinctrl_enet. It also explicitly sets the pad to 0x000b0. Before this patch, it has the value 0x1b0b0 if using mainline u-boot. So this patch also removes hysteresis and a 100K pullup since the pad is always an output. Signed-off-by: Troy Kisky Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index 9b78cf8..bbc0583 100644 --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi @@ -114,7 +114,6 @@ imx6q-sabrelite { pinctrl_hog: hoggrp { fsl,pins = < - MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000 MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x80000000 >; }; @@ -155,6 +154,8 @@ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + /* Phy reset */ + MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x000b0 >; }; -- cgit v1.1