From 1faf7f25b2aa4fcd2ae0ec2fd2e9fb9ff4bfee10 Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Tue, 24 Jun 2008 00:48:05 +0200 Subject: [MIPS] IP32: Fix unexpected irq 71 It's possible that the crime interrupt handler is called without pending interrupts (probably a hardware issue). To avoid irritating "unexpected irq 71" messages, we now just ignore the spurious crime interrupts. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle --- arch/mips/sgi-ip32/ip32-irq.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/mips/sgi-ip32/ip32-irq.c b/arch/mips/sgi-ip32/ip32-irq.c index b0ea0e4..0d6b666 100644 --- a/arch/mips/sgi-ip32/ip32-irq.c +++ b/arch/mips/sgi-ip32/ip32-irq.c @@ -425,6 +425,11 @@ static void ip32_irq0(void) BUILD_BUG_ON(MACEISA_SERIAL2_RDMAOR_IRQ - MACEISA_AUDIO_SW_IRQ != 31); crime_int = crime->istat & crime_mask; + + /* crime sometime delivers spurious interrupts, ignore them */ + if (unlikely(crime_int == 0)) + return; + irq = MACE_VID_IN1_IRQ + __ffs(crime_int); if (crime_int & CRIME_MACEISA_INT_MASK) { -- cgit v1.1 From 7e3297dc280f88ec0c6619a895f3d449776f952e Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Fri, 27 Jun 2008 23:52:26 +0200 Subject: [MIPS] IP22: Fix crashes due to wrong L1_CACHE_BYTES The introduction of a real dma cache invalidate makes it important to have a correct cache line size, otherwise the kernel will gives out two memory segment, which might share one cache line. The R4400 Indy/Indigo2 CPU modules are using a second level cache line size of 128 bytes, so MIPS_L1_CACHE_SHIFT needs to be bumped up to 7 for IP22. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index e5a7c5d..24c5dee 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1006,7 +1006,7 @@ config BOOT_ELF32 config MIPS_L1_CACHE_SHIFT int default "4" if MACH_DECSTATION - default "7" if SGI_IP27 || SGI_IP28 || SNI_RM + default "7" if SGI_IP22 || SGI_IP27 || SGI_IP28 || SNI_RM default "4" if PMC_MSP4200_EVAL default "5" -- cgit v1.1 From 8986d2f50e1a9ba63f64ccbf59181886aa7898c3 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Tue, 24 Jun 2008 23:26:38 +0900 Subject: [MIPS] cevt-txx9: Reset timer counter on initialization The txx9_tmr_init() will not clear a timer counter register in a certain case. The counter register is cleared on 1->0 transition of TCE bit if CRE=1. So just clearing the TCE bit is not enough. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/kernel/cevt-txx9.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/mips/kernel/cevt-txx9.c b/arch/mips/kernel/cevt-txx9.c index 795cb8f..b5fc4eb 100644 --- a/arch/mips/kernel/cevt-txx9.c +++ b/arch/mips/kernel/cevt-txx9.c @@ -161,6 +161,9 @@ void __init txx9_tmr_init(unsigned long baseaddr) struct txx9_tmr_reg __iomem *tmrptr; tmrptr = ioremap(baseaddr, sizeof(struct txx9_tmr_reg)); + /* Start once to make CounterResetEnable effective */ + __raw_writel(TXx9_TMTCR_CRE | TXx9_TMTCR_TCE, &tmrptr->tcr); + /* Stop and reset the counter */ __raw_writel(TXx9_TMTCR_CRE, &tmrptr->tcr); __raw_writel(0, &tmrptr->tisr); __raw_writel(0xffffffff, &tmrptr->cpra); -- cgit v1.1 From 63dd10846d4917534e9ec7bddf43be786effe8b8 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Sat, 5 Jul 2008 10:02:43 +0200 Subject: MXC: do not include board specific header from architecture include do not include board-mx31ads.h from hardware.h, instead include it directly only where needed. Signed-off-by: Sascha Hauer --- arch/arm/mach-mx3/mx31ads.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c index 7e89bdc..5addbb7 100644 --- a/arch/arm/mach-mx3/mx31ads.c +++ b/arch/arm/mach-mx3/mx31ads.c @@ -29,6 +29,7 @@ #include #include #include +#include /*! * @file mx31ads.c -- cgit v1.1 From dbff4e9ea2e83fda89143389bfb229cb29425a32 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Sat, 5 Jul 2008 10:02:45 +0200 Subject: IMX UART: remove statically initialized tables This patch removes the statically initialized tables from the i.MX serial driver and makes the driver fully dependent on the information provided by the platform_device. Signed-off-by: Sascha Hauer --- arch/arm/mach-imx/mx1ads.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-imx/mx1ads.c b/arch/arm/mach-imx/mx1ads.c index a9778c1..9635d58 100644 --- a/arch/arm/mach-imx/mx1ads.c +++ b/arch/arm/mach-imx/mx1ads.c @@ -69,6 +69,11 @@ static struct resource imx_uart1_resources[] = { .end = (UART1_MINT_TX), .flags = IORESOURCE_IRQ, }, + [3] = { + .start = UART1_MINT_RTS, + .end = UART1_MINT_RTS, + .flags = IORESOURCE_IRQ, + }, }; static struct platform_device imx_uart1_device = { @@ -97,6 +102,11 @@ static struct resource imx_uart2_resources[] = { .end = (UART2_MINT_TX), .flags = IORESOURCE_IRQ, }, + [3] = { + .start = UART2_MINT_RTS, + .end = UART2_MINT_RTS, + .flags = IORESOURCE_IRQ, + }, }; static struct platform_device imx_uart2_device = { -- cgit v1.1 From 38a41fdf94c449c165213e4665c3f8a0d30f8aba Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Sat, 5 Jul 2008 10:02:46 +0200 Subject: IMX: introduce clock API This patch introduces the clock API for i.MX and converts all in-Kernel drivers to use it. Signed-off-by: Sascha Hauer --- arch/arm/mach-imx/Makefile | 2 +- arch/arm/mach-imx/clock.c | 205 ++++++++++++++++++++++++++++++++++++++++++++ arch/arm/mach-imx/cpufreq.c | 20 ++++- arch/arm/mach-imx/generic.c | 76 ---------------- arch/arm/mach-imx/time.c | 23 +++-- 5 files changed, 240 insertions(+), 86 deletions(-) create mode 100644 arch/arm/mach-imx/clock.c (limited to 'arch') diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 88d5e61..b047c7e 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -4,7 +4,7 @@ # Object file lists. -obj-y += irq.o time.o dma.o generic.o +obj-y += irq.o time.o dma.o generic.o clock.o obj-$(CONFIG_CPU_FREQ_IMX) += cpufreq.o diff --git a/arch/arm/mach-imx/clock.c b/arch/arm/mach-imx/clock.c new file mode 100644 index 0000000..6a90fe5 --- /dev/null +++ b/arch/arm/mach-imx/clock.c @@ -0,0 +1,205 @@ +/* + * Copyright (C) 2008 Sascha Hauer , Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include + +#include +#include + +/* + * Very simple approach: We can't disable clocks, so we do + * not need refcounting + */ + +struct clk { + struct list_head node; + const char *name; + unsigned long (*get_rate)(void); +}; + +/* + * get the system pll clock in Hz + * + * mfi + mfn / (mfd +1) + * f = 2 * f_ref * -------------------- + * pd + 1 + */ +static unsigned long imx_decode_pll(unsigned int pll, u32 f_ref) +{ + unsigned long long ll; + unsigned long quot; + + u32 mfi = (pll >> 10) & 0xf; + u32 mfn = pll & 0x3ff; + u32 mfd = (pll >> 16) & 0x3ff; + u32 pd = (pll >> 26) & 0xf; + + mfi = mfi <= 5 ? 5 : mfi; + + ll = 2 * (unsigned long long)f_ref * + ((mfi << 16) + (mfn << 16) / (mfd + 1)); + quot = (pd + 1) * (1 << 16); + ll += quot / 2; + do_div(ll, quot); + return (unsigned long)ll; +} + +static unsigned long imx_get_system_clk(void) +{ + u32 f_ref = (CSCR & CSCR_SYSTEM_SEL) ? 16000000 : (CLK32 * 512); + + return imx_decode_pll(SPCTL0, f_ref); +} + +static unsigned long imx_get_mcu_clk(void) +{ + return imx_decode_pll(MPCTL0, CLK32 * 512); +} + +/* + * get peripheral clock 1 ( UART[12], Timer[12], PWM ) + */ +static unsigned long imx_get_perclk1(void) +{ + return imx_get_system_clk() / (((PCDR) & 0xf)+1); +} + +/* + * get peripheral clock 2 ( LCD, SD, SPI[12] ) + */ +static unsigned long imx_get_perclk2(void) +{ + return imx_get_system_clk() / (((PCDR>>4) & 0xf)+1); +} + +/* + * get peripheral clock 3 ( SSI ) + */ +static unsigned long imx_get_perclk3(void) +{ + return imx_get_system_clk() / (((PCDR>>16) & 0x7f)+1); +} + +/* + * get hclk ( SDRAM, CSI, Memory Stick, I2C, DMA ) + */ +static unsigned long imx_get_hclk(void) +{ + return imx_get_system_clk() / (((CSCR>>10) & 0xf)+1); +} + +static struct clk clk_system_clk = { + .name = "system_clk", + .get_rate = imx_get_system_clk, +}; + +static struct clk clk_hclk = { + .name = "hclk", + .get_rate = imx_get_hclk, +}; + +static struct clk clk_mcu_clk = { + .name = "mcu_clk", + .get_rate = imx_get_mcu_clk, +}; + +static struct clk clk_perclk1 = { + .name = "perclk1", + .get_rate = imx_get_perclk1, +}; + +static struct clk clk_uart_clk = { + .name = "uart_clk", + .get_rate = imx_get_perclk1, +}; + +static struct clk clk_perclk2 = { + .name = "perclk2", + .get_rate = imx_get_perclk2, +}; + +static struct clk clk_perclk3 = { + .name = "perclk3", + .get_rate = imx_get_perclk3, +}; + +static struct clk *clks[] = { + &clk_perclk1, + &clk_perclk2, + &clk_perclk3, + &clk_system_clk, + &clk_hclk, + &clk_mcu_clk, + &clk_uart_clk, +}; + +static LIST_HEAD(clocks); +static DEFINE_MUTEX(clocks_mutex); + +struct clk *clk_get(struct device *dev, const char *id) +{ + struct clk *p, *clk = ERR_PTR(-ENOENT); + + mutex_lock(&clocks_mutex); + list_for_each_entry(p, &clocks, node) { + if (!strcmp(p->name, id)) { + clk = p; + goto found; + } + } + +found: + mutex_unlock(&clocks_mutex); + + return clk; +} + +void clk_put(struct clk *clk) +{ +} + +int clk_enable(struct clk *clk) +{ + return 0; +} + +void clk_disable(struct clk *clk) +{ +} + +unsigned long clk_get_rate(struct clk *clk) +{ + return clk->get_rate(); +} + +int imx_clocks_init(void) +{ + int i; + + mutex_lock(&clocks_mutex); + for (i = 0; i < ARRAY_SIZE(clks); i++) + list_add(&clks[i]->node, &clocks); + mutex_unlock(&clocks_mutex); + + return 0; +} + diff --git a/arch/arm/mach-imx/cpufreq.c b/arch/arm/mach-imx/cpufreq.c index e548ba7..be0809b 100644 --- a/arch/arm/mach-imx/cpufreq.c +++ b/arch/arm/mach-imx/cpufreq.c @@ -32,6 +32,8 @@ #include #include #include +#include +#include #include #include @@ -52,6 +54,8 @@ static u32 mpctl0_at_boot; static u32 bclk_div_at_boot; +static struct clk *system_clk, *mcu_clk; + static void imx_set_async_mode(void) { adjust_cr(CR_920T_CLOCK_MODE, CR_920T_ASYNC_MODE); @@ -160,10 +164,10 @@ static unsigned int imx_get_speed(unsigned int cpu) cr = get_cr(); if((cr & CR_920T_CLOCK_MODE) == CR_920T_FASTBUS_MODE) { - freq = imx_get_system_clk(); + freq = clk_get_rate(system_clk); freq = (freq + bclk_div/2) / bclk_div; } else { - freq = imx_get_mcu_clk(); + freq = clk_get_rate(mcu_clk); if (cscr & CSCR_MPU_PRESC) freq /= 2; } @@ -201,7 +205,7 @@ static int imx_set_target(struct cpufreq_policy *policy, pr_debug(KERN_DEBUG "imx: requested frequency %ld Hz, mpctl0 at boot 0x%08x\n", freq, mpctl0_at_boot); - sysclk = imx_get_system_clk(); + sysclk = clk_get_rate(system_clk); if (freq > sysclk / bclk_div_at_boot + 1000000) { freq = imx_compute_mpctl(&mpctl0, mpctl0_at_boot, CLK32 * 512, freq, relation); @@ -290,6 +294,16 @@ static int __init imx_cpufreq_init(void) bclk_div_at_boot = __mfld2val(CSCR_BCLK_DIV, CSCR) + 1; mpctl0_at_boot = 0; + system_clk = clk_get(NULL, "system_clk"); + if (IS_ERR(system_clk)) + return PTR_ERR(system_clk); + + mcu_clk = clk_get(NULL, "mcu_clk"); + if (IS_ERR(mcu_clk)) { + clk_put(system_clk); + return PTR_ERR(mcu_clk); + } + if((CSCR & CSCR_MPEN) && ((get_cr() & CR_920T_CLOCK_MODE) != CR_920T_FASTBUS_MODE)) mpctl0_at_boot = MPCTL0; diff --git a/arch/arm/mach-imx/generic.c b/arch/arm/mach-imx/generic.c index 4cfc9d3..98ddd8a 100644 --- a/arch/arm/mach-imx/generic.c +++ b/arch/arm/mach-imx/generic.c @@ -214,82 +214,6 @@ int imx_irq_to_gpio(unsigned irq) EXPORT_SYMBOL(imx_irq_to_gpio); -/* - * get the system pll clock in Hz - * - * mfi + mfn / (mfd +1) - * f = 2 * f_ref * -------------------- - * pd + 1 - */ -static unsigned int imx_decode_pll(unsigned int pll, u32 f_ref) -{ - unsigned long long ll; - unsigned long quot; - - u32 mfi = (pll >> 10) & 0xf; - u32 mfn = pll & 0x3ff; - u32 mfd = (pll >> 16) & 0x3ff; - u32 pd = (pll >> 26) & 0xf; - - mfi = mfi <= 5 ? 5 : mfi; - - ll = 2 * (unsigned long long)f_ref * ( (mfi<<16) + (mfn<<16) / (mfd+1) ); - quot = (pd+1) * (1<<16); - ll += quot / 2; - do_div(ll, quot); - return (unsigned int) ll; -} - -unsigned int imx_get_system_clk(void) -{ - u32 f_ref = (CSCR & CSCR_SYSTEM_SEL) ? 16000000 : (CLK32 * 512); - - return imx_decode_pll(SPCTL0, f_ref); -} -EXPORT_SYMBOL(imx_get_system_clk); - -unsigned int imx_get_mcu_clk(void) -{ - return imx_decode_pll(MPCTL0, CLK32 * 512); -} -EXPORT_SYMBOL(imx_get_mcu_clk); - -/* - * get peripheral clock 1 ( UART[12], Timer[12], PWM ) - */ -unsigned int imx_get_perclk1(void) -{ - return imx_get_system_clk() / (((PCDR) & 0xf)+1); -} -EXPORT_SYMBOL(imx_get_perclk1); - -/* - * get peripheral clock 2 ( LCD, SD, SPI[12] ) - */ -unsigned int imx_get_perclk2(void) -{ - return imx_get_system_clk() / (((PCDR>>4) & 0xf)+1); -} -EXPORT_SYMBOL(imx_get_perclk2); - -/* - * get peripheral clock 3 ( SSI ) - */ -unsigned int imx_get_perclk3(void) -{ - return imx_get_system_clk() / (((PCDR>>16) & 0x7f)+1); -} -EXPORT_SYMBOL(imx_get_perclk3); - -/* - * get hclk ( SDRAM, CSI, Memory Stick, I2C, DMA ) - */ -unsigned int imx_get_hclk(void) -{ - return imx_get_system_clk() / (((CSCR>>10) & 0xf)+1); -} -EXPORT_SYMBOL(imx_get_hclk); - static struct resource imx_mmc_resources[] = { [0] = { .start = 0x00214000, diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c index d86d124..5a41e96 100644 --- a/arch/arm/mach-imx/time.c +++ b/arch/arm/mach-imx/time.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include @@ -86,10 +87,10 @@ static struct clocksource clocksource_imx = { .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; -static int __init imx_clocksource_init(void) +static int __init imx_clocksource_init(unsigned long rate) { clocksource_imx.mult = - clocksource_hz2mult(imx_get_perclk1(), clocksource_imx.shift); + clocksource_hz2mult(rate, clocksource_imx.shift); clocksource_register(&clocksource_imx); return 0; @@ -174,9 +175,9 @@ static struct clock_event_device clockevent_imx = { .rating = 200, }; -static int __init imx_clockevent_init(void) +static int __init imx_clockevent_init(unsigned long rate) { - clockevent_imx.mult = div_sc(imx_get_perclk1(), NSEC_PER_SEC, + clockevent_imx.mult = div_sc(rate, NSEC_PER_SEC, clockevent_imx.shift); clockevent_imx.max_delta_ns = clockevent_delta2ns(0xfffffffe, &clockevent_imx); @@ -190,13 +191,23 @@ static int __init imx_clockevent_init(void) return 0; } +extern int imx_clocks_init(void); static void __init imx_timer_init(void) { + struct clk *clk; + unsigned long rate; + + imx_clocks_init(); + + clk = clk_get(NULL, "perclk1"); + clk_enable(clk); + rate = clk_get_rate(clk); + imx_timer_hardware_init(); - imx_clocksource_init(); + imx_clocksource_init(rate); - imx_clockevent_init(); + imx_clockevent_init(rate); /* * Make irqs happen for the system timer -- cgit v1.1 From c0db2ea4e366c94dd3f880928c02534156e3d1b9 Mon Sep 17 00:00:00 2001 From: Juergen Beisert Date: Sat, 5 Jul 2008 10:02:47 +0200 Subject: MXC family: Add clock handling Internal clock path handling for the mxc CPUs. Changed against the original Freescale code (and against clocklib for example): - clock rate is always calculated whenever one ask for the current rate (means struct clk has no more a member called "rate"). So switching the PLL base frequency will propagate immediately to all other clocks that are depending on this frequency. Signed-off-by: Juergen Beisert --- arch/arm/plat-mxc/Makefile | 2 +- arch/arm/plat-mxc/clock.c | 331 +++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 332 insertions(+), 1 deletion(-) create mode 100644 arch/arm/plat-mxc/clock.c (limited to 'arch') diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile index f96dc03..3eb181c 100644 --- a/arch/arm/plat-mxc/Makefile +++ b/arch/arm/plat-mxc/Makefile @@ -3,4 +3,4 @@ # # Common support -obj-y := irq.o +obj-y := irq.o clock.o diff --git a/arch/arm/plat-mxc/clock.c b/arch/arm/plat-mxc/clock.c new file mode 100644 index 0000000..1aa86fd --- /dev/null +++ b/arch/arm/plat-mxc/clock.c @@ -0,0 +1,331 @@ +/* + * Based on arch/arm/plat-omap/clock.c + * + * Copyright (C) 2004 - 2005 Nokia corporation + * Written by Tuukka Tikkanen + * Modified for omap shared clock framework by Tony Lindgren + * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +/* #define DEBUG */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +static LIST_HEAD(clocks); +static DEFINE_MUTEX(clocks_mutex); + +/*------------------------------------------------------------------------- + * Standard clock functions defined in include/linux/clk.h + *-------------------------------------------------------------------------*/ + +/* + * Retrieve a clock by name. + * + * Note that we first try to use device id on the bus + * and clock name. If this fails, we try to use ".". If this fails, + * we try to use clock name only. + * The reference count to the clock's module owner ref count is incremented. + */ +struct clk *clk_get(struct device *dev, const char *id) +{ + struct clk *p, *clk = ERR_PTR(-ENOENT); + int idno; + const char *str; + + if (id == NULL) + return clk; + + if (dev == NULL || dev->bus != &platform_bus_type) + idno = -1; + else + idno = to_platform_device(dev)->id; + + mutex_lock(&clocks_mutex); + + list_for_each_entry(p, &clocks, node) { + if (p->id == idno && + strcmp(id, p->name) == 0 && try_module_get(p->owner)) { + clk = p; + goto found; + } + } + + str = strrchr(id, '.'); + if (str) { + int cnt = str - id; + str++; + idno = simple_strtol(str, NULL, 10); + list_for_each_entry(p, &clocks, node) { + if (p->id == idno && + strlen(p->name) == cnt && + strncmp(id, p->name, cnt) == 0 && + try_module_get(p->owner)) { + clk = p; + goto found; + } + } + } + + list_for_each_entry(p, &clocks, node) { + if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) { + clk = p; + goto found; + } + } + + printk(KERN_WARNING "clk: Unable to get requested clock: %s\n", id); + +found: + mutex_unlock(&clocks_mutex); + + return clk; +} +EXPORT_SYMBOL(clk_get); + +static void __clk_disable(struct clk *clk) +{ + if (clk == NULL || IS_ERR(clk)) + return; + + __clk_disable(clk->parent); + __clk_disable(clk->secondary); + + if (!(--clk->usecount) && clk->disable) + clk->disable(clk); +} + +static int __clk_enable(struct clk *clk) +{ + if (clk == NULL || IS_ERR(clk)) + return -EINVAL; + + __clk_enable(clk->parent); + __clk_enable(clk->secondary); + + if (clk->usecount++ == 0 && clk->enable) + clk->enable(clk); + + return 0; +} + +/* This function increments the reference count on the clock and enables the + * clock if not already enabled. The parent clock tree is recursively enabled + */ +int clk_enable(struct clk *clk) +{ + int ret = 0; + + if (clk == NULL || IS_ERR(clk)) + return -EINVAL; + + mutex_lock(&clocks_mutex); + ret = __clk_enable(clk); + mutex_unlock(&clocks_mutex); + + return ret; +} +EXPORT_SYMBOL(clk_enable); + +/* This function decrements the reference count on the clock and disables + * the clock when reference count is 0. The parent clock tree is + * recursively disabled + */ +void clk_disable(struct clk *clk) +{ + if (clk == NULL || IS_ERR(clk)) + return; + + mutex_lock(&clocks_mutex); + __clk_disable(clk); + mutex_unlock(&clocks_mutex); +} +EXPORT_SYMBOL(clk_disable); + +/* Retrieve the *current* clock rate. If the clock itself + * does not provide a special calculation routine, ask + * its parent and so on, until one is able to return + * a valid clock rate + */ +unsigned long clk_get_rate(struct clk *clk) +{ + if (clk == NULL || IS_ERR(clk)) + return 0UL; + + if (clk->get_rate) + return clk->get_rate(clk); + + return clk_get_rate(clk->parent); +} +EXPORT_SYMBOL(clk_get_rate); + +/* Decrement the clock's module reference count */ +void clk_put(struct clk *clk) +{ + if (clk && !IS_ERR(clk)) + module_put(clk->owner); +} +EXPORT_SYMBOL(clk_put); + +/* Round the requested clock rate to the nearest supported + * rate that is less than or equal to the requested rate. + * This is dependent on the clock's current parent. + */ +long clk_round_rate(struct clk *clk, unsigned long rate) +{ + if (clk == NULL || IS_ERR(clk) || !clk->round_rate) + return 0; + + return clk->round_rate(clk, rate); +} +EXPORT_SYMBOL(clk_round_rate); + +/* Set the clock to the requested clock rate. The rate must + * match a supported rate exactly based on what clk_round_rate returns + */ +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + int ret = -EINVAL; + + if (clk == NULL || IS_ERR(clk) || clk->set_rate == NULL || rate == 0) + return ret; + + mutex_lock(&clocks_mutex); + ret = clk->set_rate(clk, rate); + mutex_unlock(&clocks_mutex); + + return ret; +} +EXPORT_SYMBOL(clk_set_rate); + +/* Set the clock's parent to another clock source */ +int clk_set_parent(struct clk *clk, struct clk *parent) +{ + int ret = -EINVAL; + + if (clk == NULL || IS_ERR(clk) || parent == NULL || + IS_ERR(parent) || clk->set_parent == NULL) + return ret; + + mutex_lock(&clocks_mutex); + ret = clk->set_parent(clk, parent); + if (ret == 0) + clk->parent = parent; + mutex_unlock(&clocks_mutex); + + return ret; +} +EXPORT_SYMBOL(clk_set_parent); + +/* Retrieve the clock's parent clock source */ +struct clk *clk_get_parent(struct clk *clk) +{ + struct clk *ret = NULL; + + if (clk == NULL || IS_ERR(clk)) + return ret; + + return clk->parent; +} +EXPORT_SYMBOL(clk_get_parent); + +/* + * Add a new clock to the clock tree. + */ +int clk_register(struct clk *clk) +{ + if (clk == NULL || IS_ERR(clk)) + return -EINVAL; + + mutex_lock(&clocks_mutex); + list_add(&clk->node, &clocks); + mutex_unlock(&clocks_mutex); + + return 0; +} +EXPORT_SYMBOL(clk_register); + +/* Remove a clock from the clock tree */ +void clk_unregister(struct clk *clk) +{ + if (clk == NULL || IS_ERR(clk)) + return; + + mutex_lock(&clocks_mutex); + list_del(&clk->node); + mutex_unlock(&clocks_mutex); +} +EXPORT_SYMBOL(clk_unregister); + +#ifdef CONFIG_PROC_FS +static int mxc_clock_read_proc(char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + struct clk *clkp; + char *p = page; + int len; + + list_for_each_entry(clkp, &clocks, node) { + p += sprintf(p, "%s-%d:\t\t%lu, %d", clkp->name, clkp->id, + clk_get_rate(clkp), clkp->usecount); + if (clkp->parent) + p += sprintf(p, ", %s-%d\n", clkp->parent->name, + clkp->parent->id); + else + p += sprintf(p, "\n"); + } + + len = (p - page) - off; + if (len < 0) + len = 0; + + *eof = (len <= count) ? 1 : 0; + *start = page + off; + + return len; +} + +static int __init mxc_setup_proc_entry(void) +{ + struct proc_dir_entry *res; + + res = create_proc_read_entry("cpu/clocks", 0, NULL, + mxc_clock_read_proc, NULL); + if (!res) { + printk(KERN_ERR "Failed to create proc/cpu/clocks\n"); + return -ENOMEM; + } + return 0; +} + +late_initcall(mxc_setup_proc_entry); +#endif -- cgit v1.1 From df1bf4bdb2a3a26d4bde8ae1aefc16385dd4898f Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Sat, 5 Jul 2008 10:02:48 +0200 Subject: i.MX3: introduce clock API This patch introduces the clock API for for arch-mxc Signed-off-by: Sascha Hauer --- arch/arm/mach-mx3/Makefile | 2 +- arch/arm/mach-mx3/clock.c | 1147 ++++++++++++++++++++++++++++++++++++++++++ arch/arm/mach-mx3/crm_regs.h | 401 +++++++++++++++ 3 files changed, 1549 insertions(+), 1 deletion(-) create mode 100644 arch/arm/mach-mx3/clock.c create mode 100644 arch/arm/mach-mx3/crm_regs.h (limited to 'arch') diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile index cbec997..febb37f 100644 --- a/arch/arm/mach-mx3/Makefile +++ b/arch/arm/mach-mx3/Makefile @@ -4,5 +4,5 @@ # Object file lists. -obj-y := mm.o time.o +obj-y := mm.o time.o clock.o obj-$(CONFIG_MACH_MX31ADS) += mx31ads.o diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c new file mode 100644 index 0000000..2f36359 --- /dev/null +++ b/arch/arm/mach-mx3/clock.c @@ -0,0 +1,1147 @@ +/* + * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2008 by Sascha Hauer + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "crm_regs.h" + +#define PRE_DIV_MIN_FREQ 10000000 /* Minimum Frequency after Predivider */ + +static void __calc_pre_post_dividers(u32 div, u32 *pre, u32 *post) +{ + u32 min_pre, temp_pre, old_err, err; + + if (div >= 512) { + *pre = 8; + *post = 64; + } else if (div >= 64) { + min_pre = (div - 1) / 64 + 1; + old_err = 8; + for (temp_pre = 8; temp_pre >= min_pre; temp_pre--) { + err = div % temp_pre; + if (err == 0) { + *pre = temp_pre; + break; + } + err = temp_pre - err; + if (err < old_err) { + old_err = err; + *pre = temp_pre; + } + } + *post = (div + *pre - 1) / *pre; + } else if (div <= 8) { + *pre = div; + *post = 1; + } else { + *pre = 1; + *post = div; + } +} + +static struct clk mcu_pll_clk; +static struct clk mcu_main_clk; +static struct clk usb_pll_clk; +static struct clk serial_pll_clk; +static struct clk ipg_clk; +static struct clk ckih_clk; +static struct clk ahb_clk; + +static int _clk_enable(struct clk *clk) +{ + u32 reg; + + reg = __raw_readl(clk->enable_reg); + reg |= 3 << clk->enable_shift; + __raw_writel(reg, clk->enable_reg); + + return 0; +} + +static void _clk_disable(struct clk *clk) +{ + u32 reg; + + reg = __raw_readl(clk->enable_reg); + reg &= ~(3 << clk->enable_shift); + __raw_writel(reg, clk->enable_reg); +} + +static void _clk_emi_disable(struct clk *clk) +{ + u32 reg; + + reg = __raw_readl(clk->enable_reg); + reg &= ~(3 << clk->enable_shift); + reg |= (1 << clk->enable_shift); + __raw_writel(reg, clk->enable_reg); +} + +static int _clk_pll_set_rate(struct clk *clk, unsigned long rate) +{ + u32 reg; + signed long pd = 1; /* Pre-divider */ + signed long mfi; /* Multiplication Factor (Integer part) */ + signed long mfn; /* Multiplication Factor (Integer part) */ + signed long mfd; /* Multiplication Factor (Denominator Part) */ + signed long tmp; + u32 ref_freq = clk_get_rate(clk->parent); + + while (((ref_freq / pd) * 10) > rate) + pd++; + + if ((ref_freq / pd) < PRE_DIV_MIN_FREQ) + return -EINVAL; + + /* the ref_freq/2 in the following is to round up */ + mfi = (((rate / 2) * pd) + (ref_freq / 2)) / ref_freq; + if (mfi < 5 || mfi > 15) + return -EINVAL; + + /* pick a mfd value that will work + * then solve for mfn */ + mfd = ref_freq / 50000; + + /* + * pll_freq * pd * mfd + * mfn = -------------------- - (mfi * mfd) + * 2 * ref_freq + */ + /* the tmp/2 is for rounding */ + tmp = ref_freq / 10000; + mfn = + ((((((rate / 2) + (tmp / 2)) / tmp) * pd) * mfd) / 10000) - + (mfi * mfd); + + mfn = mfn & 0x3ff; + pd--; + mfd--; + + /* Change the Pll value */ + reg = (mfi << MXC_CCM_PCTL_MFI_OFFSET) | + (mfn << MXC_CCM_PCTL_MFN_OFFSET) | + (mfd << MXC_CCM_PCTL_MFD_OFFSET) | (pd << MXC_CCM_PCTL_PD_OFFSET); + + if (clk == &mcu_pll_clk) + __raw_writel(reg, MXC_CCM_MPCTL); + else if (clk == &usb_pll_clk) + __raw_writel(reg, MXC_CCM_UPCTL); + else if (clk == &serial_pll_clk) + __raw_writel(reg, MXC_CCM_SRPCTL); + + return 0; +} + +static unsigned long _clk_pll_get_rate(struct clk *clk) +{ + long mfi, mfn, mfd, pdf, ref_clk, mfn_abs; + unsigned long reg, ccmr; + s64 temp; + unsigned int prcs; + + ccmr = __raw_readl(MXC_CCM_CCMR); + prcs = (ccmr & MXC_CCM_CCMR_PRCS_MASK) >> MXC_CCM_CCMR_PRCS_OFFSET; + if (prcs == 0x1) + ref_clk = CKIL_CLK_FREQ * 1024; + else + ref_clk = clk_get_rate(&ckih_clk); + + if (clk == &mcu_pll_clk) { + if ((ccmr & MXC_CCM_CCMR_MPE) == 0) + return ref_clk; + if ((ccmr & MXC_CCM_CCMR_MDS) != 0) + return ref_clk; + reg = __raw_readl(MXC_CCM_MPCTL); + } else if (clk == &usb_pll_clk) + reg = __raw_readl(MXC_CCM_UPCTL); + else if (clk == &serial_pll_clk) + reg = __raw_readl(MXC_CCM_SRPCTL); + else { + BUG(); + return 0; + } + + pdf = (reg & MXC_CCM_PCTL_PD_MASK) >> MXC_CCM_PCTL_PD_OFFSET; + mfd = (reg & MXC_CCM_PCTL_MFD_MASK) >> MXC_CCM_PCTL_MFD_OFFSET; + mfi = (reg & MXC_CCM_PCTL_MFI_MASK) >> MXC_CCM_PCTL_MFI_OFFSET; + mfi = (mfi <= 5) ? 5 : mfi; + mfn = mfn_abs = reg & MXC_CCM_PCTL_MFN_MASK; + + if (mfn >= 0x200) { + mfn |= 0xFFFFFE00; + mfn_abs = -mfn; + } + + ref_clk *= 2; + ref_clk /= pdf + 1; + + temp = (u64) ref_clk * mfn_abs; + do_div(temp, mfd + 1); + if (mfn < 0) + temp = -temp; + temp = (ref_clk * mfi) + temp; + + return temp; +} + +static int _clk_usb_pll_enable(struct clk *clk) +{ + u32 reg; + + reg = __raw_readl(MXC_CCM_CCMR); + reg |= MXC_CCM_CCMR_UPE; + __raw_writel(reg, MXC_CCM_CCMR); + + /* No lock bit on MX31, so using max time from spec */ + udelay(80); + + return 0; +} + +static void _clk_usb_pll_disable(struct clk *clk) +{ + u32 reg; + + reg = __raw_readl(MXC_CCM_CCMR); + reg &= ~MXC_CCM_CCMR_UPE; + __raw_writel(reg, MXC_CCM_CCMR); +} + +static int _clk_serial_pll_enable(struct clk *clk) +{ + u32 reg; + + reg = __raw_readl(MXC_CCM_CCMR); + reg |= MXC_CCM_CCMR_SPE; + __raw_writel(reg, MXC_CCM_CCMR); + + /* No lock bit on MX31, so using max time from spec */ + udelay(80); + + return 0; +} + +static void _clk_serial_pll_disable(struct clk *clk) +{ + u32 reg; + + reg = __raw_readl(MXC_CCM_CCMR); + reg &= ~MXC_CCM_CCMR_SPE; + __raw_writel(reg, MXC_CCM_CCMR); +} + +#define PDR0(mask, off) ((__raw_readl(MXC_CCM_PDR0) & mask) >> off) +#define PDR1(mask, off) ((__raw_readl(MXC_CCM_PDR1) & mask) >> off) +#define PDR2(mask, off) ((__raw_readl(MXC_CCM_PDR2) & mask) >> off) + +static unsigned long _clk_mcu_main_get_rate(struct clk *clk) +{ + u32 pmcr0 = __raw_readl(MXC_CCM_PMCR0); + + if ((pmcr0 & MXC_CCM_PMCR0_DFSUP1) == MXC_CCM_PMCR0_DFSUP1_SPLL) + return clk_get_rate(&serial_pll_clk); + else + return clk_get_rate(&mcu_pll_clk); +} + +static unsigned long _clk_hclk_get_rate(struct clk *clk) +{ + unsigned long max_pdf; + + max_pdf = PDR0(MXC_CCM_PDR0_MAX_PODF_MASK, + MXC_CCM_PDR0_MAX_PODF_OFFSET); + return clk_get_rate(clk->parent) / (max_pdf + 1); +} + +static unsigned long _clk_ipg_get_rate(struct clk *clk) +{ + unsigned long ipg_pdf; + + ipg_pdf = PDR0(MXC_CCM_PDR0_IPG_PODF_MASK, + MXC_CCM_PDR0_IPG_PODF_OFFSET); + return clk_get_rate(clk->parent) / (ipg_pdf + 1); +} + +static unsigned long _clk_nfc_get_rate(struct clk *clk) +{ + unsigned long nfc_pdf; + + nfc_pdf = PDR0(MXC_CCM_PDR0_NFC_PODF_MASK, + MXC_CCM_PDR0_NFC_PODF_OFFSET); + return clk_get_rate(clk->parent) / (nfc_pdf + 1); +} + +static unsigned long _clk_hsp_get_rate(struct clk *clk) +{ + unsigned long hsp_pdf; + + hsp_pdf = PDR0(MXC_CCM_PDR0_HSP_PODF_MASK, + MXC_CCM_PDR0_HSP_PODF_OFFSET); + return clk_get_rate(clk->parent) / (hsp_pdf + 1); +} + +static unsigned long _clk_usb_get_rate(struct clk *clk) +{ + unsigned long usb_pdf, usb_prepdf; + + usb_pdf = PDR1(MXC_CCM_PDR1_USB_PODF_MASK, + MXC_CCM_PDR1_USB_PODF_OFFSET); + usb_prepdf = PDR1(MXC_CCM_PDR1_USB_PRDF_MASK, + MXC_CCM_PDR1_USB_PRDF_OFFSET); + return clk_get_rate(clk->parent) / (usb_prepdf + 1) / (usb_pdf + 1); +} + +static unsigned long _clk_csi_get_rate(struct clk *clk) +{ + u32 reg, pre, post; + + reg = __raw_readl(MXC_CCM_PDR0); + pre = (reg & MXC_CCM_PDR0_CSI_PRDF_MASK) >> + MXC_CCM_PDR0_CSI_PRDF_OFFSET; + pre++; + post = (reg & MXC_CCM_PDR0_CSI_PODF_MASK) >> + MXC_CCM_PDR0_CSI_PODF_OFFSET; + post++; + return clk_get_rate(clk->parent) / (pre * post); +} + +static unsigned long _clk_csi_round_rate(struct clk *clk, unsigned long rate) +{ + u32 pre, post, parent = clk_get_rate(clk->parent); + u32 div = parent / rate; + + if (parent % rate) + div++; + + __calc_pre_post_dividers(div, &pre, &post); + + return parent / (pre * post); +} + +static int _clk_csi_set_rate(struct clk *clk, unsigned long rate) +{ + u32 reg, div, pre, post, parent = clk_get_rate(clk->parent); + + div = parent / rate; + + if ((parent / div) != rate) + return -EINVAL; + + __calc_pre_post_dividers(div, &pre, &post); + + /* Set CSI clock divider */ + reg = __raw_readl(MXC_CCM_PDR0) & + ~(MXC_CCM_PDR0_CSI_PODF_MASK | MXC_CCM_PDR0_CSI_PRDF_MASK); + reg |= (post - 1) << MXC_CCM_PDR0_CSI_PODF_OFFSET; + reg |= (pre - 1) << MXC_CCM_PDR0_CSI_PRDF_OFFSET; + __raw_writel(reg, MXC_CCM_PDR0); + + return 0; +} + +static unsigned long _clk_per_get_rate(struct clk *clk) +{ + unsigned long per_pdf; + + per_pdf = PDR0(MXC_CCM_PDR0_PER_PODF_MASK, + MXC_CCM_PDR0_PER_PODF_OFFSET); + return clk_get_rate(clk->parent) / (per_pdf + 1); +} + +static unsigned long _clk_ssi1_get_rate(struct clk *clk) +{ + unsigned long ssi1_pdf, ssi1_prepdf; + + ssi1_pdf = PDR1(MXC_CCM_PDR1_SSI1_PODF_MASK, + MXC_CCM_PDR1_SSI1_PODF_OFFSET); + ssi1_prepdf = PDR1(MXC_CCM_PDR1_SSI1_PRE_PODF_MASK, + MXC_CCM_PDR1_SSI1_PRE_PODF_OFFSET); + return clk_get_rate(clk->parent) / (ssi1_prepdf + 1) / (ssi1_pdf + 1); +} + +static unsigned long _clk_ssi2_get_rate(struct clk *clk) +{ + unsigned long ssi2_pdf, ssi2_prepdf; + + ssi2_pdf = PDR1(MXC_CCM_PDR1_SSI2_PODF_MASK, + MXC_CCM_PDR1_SSI2_PODF_OFFSET); + ssi2_prepdf = PDR1(MXC_CCM_PDR1_SSI2_PRE_PODF_MASK, + MXC_CCM_PDR1_SSI2_PRE_PODF_OFFSET); + return clk_get_rate(clk->parent) / (ssi2_prepdf + 1) / (ssi2_pdf + 1); +} + +static unsigned long _clk_firi_get_rate(struct clk *clk) +{ + unsigned long firi_pdf, firi_prepdf; + + firi_pdf = PDR1(MXC_CCM_PDR1_FIRI_PODF_MASK, + MXC_CCM_PDR1_FIRI_PODF_OFFSET); + firi_prepdf = PDR1(MXC_CCM_PDR1_FIRI_PRE_PODF_MASK, + MXC_CCM_PDR1_FIRI_PRE_PODF_OFFSET); + return clk_get_rate(clk->parent) / (firi_prepdf + 1) / (firi_pdf + 1); +} + +static unsigned long _clk_firi_round_rate(struct clk *clk, unsigned long rate) +{ + u32 pre, post; + u32 parent = clk_get_rate(clk->parent); + u32 div = parent / rate; + + if (parent % rate) + div++; + + __calc_pre_post_dividers(div, &pre, &post); + + return parent / (pre * post); + +} + +static int _clk_firi_set_rate(struct clk *clk, unsigned long rate) +{ + u32 reg, div, pre, post, parent = clk_get_rate(clk->parent); + + div = parent / rate; + + if ((parent / div) != rate) + return -EINVAL; + + __calc_pre_post_dividers(div, &pre, &post); + + /* Set FIRI clock divider */ + reg = __raw_readl(MXC_CCM_PDR1) & + ~(MXC_CCM_PDR1_FIRI_PODF_MASK | MXC_CCM_PDR1_FIRI_PRE_PODF_MASK); + reg |= (pre - 1) << MXC_CCM_PDR1_FIRI_PRE_PODF_OFFSET; + reg |= (post - 1) << MXC_CCM_PDR1_FIRI_PODF_OFFSET; + __raw_writel(reg, MXC_CCM_PDR1); + + return 0; +} + +static unsigned long _clk_mbx_get_rate(struct clk *clk) +{ + return clk_get_rate(clk->parent) / 2; +} + +static unsigned long _clk_mstick1_get_rate(struct clk *clk) +{ + unsigned long msti_pdf; + + msti_pdf = PDR2(MXC_CCM_PDR2_MST1_PDF_MASK, + MXC_CCM_PDR2_MST1_PDF_OFFSET); + return clk_get_rate(clk->parent) / (msti_pdf + 1); +} + +static unsigned long _clk_mstick2_get_rate(struct clk *clk) +{ + unsigned long msti_pdf; + + msti_pdf = PDR2(MXC_CCM_PDR2_MST2_PDF_MASK, + MXC_CCM_PDR2_MST2_PDF_OFFSET); + return clk_get_rate(clk->parent) / (msti_pdf + 1); +} + +static unsigned long ckih_rate; + +static unsigned long clk_ckih_get_rate(struct clk *clk) +{ + return ckih_rate; +} + +static struct clk ckih_clk = { + .name = "ckih", + .get_rate = clk_ckih_get_rate, +}; + +static unsigned long clk_ckil_get_rate(struct clk *clk) +{ + return CKIL_CLK_FREQ; +} + +static struct clk ckil_clk = { + .name = "ckil", + .get_rate = clk_ckil_get_rate, +}; + +static struct clk mcu_pll_clk = { + .name = "mcu_pll", + .parent = &ckih_clk, + .set_rate = _clk_pll_set_rate, + .get_rate = _clk_pll_get_rate, +}; + +static struct clk mcu_main_clk = { + .name = "mcu_main_clk", + .parent = &mcu_pll_clk, + .get_rate = _clk_mcu_main_get_rate, +}; + +static struct clk serial_pll_clk = { + .name = "serial_pll", + .parent = &ckih_clk, + .set_rate = _clk_pll_set_rate, + .get_rate = _clk_pll_get_rate, + .enable = _clk_serial_pll_enable, + .disable = _clk_serial_pll_disable, +}; + +static struct clk usb_pll_clk = { + .name = "usb_pll", + .parent = &ckih_clk, + .set_rate = _clk_pll_set_rate, + .get_rate = _clk_pll_get_rate, + .enable = _clk_usb_pll_enable, + .disable = _clk_usb_pll_disable, +}; + +static struct clk ahb_clk = { + .name = "ahb_clk", + .parent = &mcu_main_clk, + .get_rate = _clk_hclk_get_rate, +}; + +static struct clk per_clk = { + .name = "per_clk", + .parent = &usb_pll_clk, + .get_rate = _clk_per_get_rate, +}; + +static struct clk perclk_clk = { + .name = "perclk_clk", + .parent = &ipg_clk, +}; + +static struct clk cspi_clk[] = { + { + .name = "cspi_clk", + .id = 0, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR2, + .enable_shift = MXC_CCM_CGR2_CSPI1_OFFSET, + .disable = _clk_disable,}, + { + .name = "cspi_clk", + .id = 1, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR2, + .enable_shift = MXC_CCM_CGR2_CSPI2_OFFSET, + .disable = _clk_disable,}, + { + .name = "cspi_clk", + .id = 2, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR0, + .enable_shift = MXC_CCM_CGR0_CSPI3_OFFSET, + .disable = _clk_disable,}, +}; + +static struct clk ipg_clk = { + .name = "ipg_clk", + .parent = &ahb_clk, + .get_rate = _clk_ipg_get_rate, +}; + +static struct clk emi_clk = { + .name = "emi_clk", + .parent = &ahb_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR2, + .enable_shift = MXC_CCM_CGR2_EMI_OFFSET, + .disable = _clk_emi_disable, +}; + +static struct clk gpt_clk = { + .name = "gpt_clk", + .parent = &perclk_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR0, + .enable_shift = MXC_CCM_CGR0_GPT_OFFSET, + .disable = _clk_disable, +}; + +static struct clk pwm_clk = { + .name = "pwm_clk", + .parent = &perclk_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR0, + .enable_shift = MXC_CCM_CGR1_PWM_OFFSET, + .disable = _clk_disable, +}; + +static struct clk epit_clk[] = { + { + .name = "epit_clk", + .id = 0, + .parent = &perclk_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR0, + .enable_shift = MXC_CCM_CGR0_EPIT1_OFFSET, + .disable = _clk_disable,}, + { + .name = "epit_clk", + .id = 1, + .parent = &perclk_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR0, + .enable_shift = MXC_CCM_CGR0_EPIT2_OFFSET, + .disable = _clk_disable,}, +}; + +static struct clk nfc_clk = { + .name = "nfc_clk", + .parent = &ahb_clk, + .get_rate = _clk_nfc_get_rate, +}; + +static struct clk scc_clk = { + .name = "scc_clk", + .parent = &ipg_clk, +}; + +static struct clk ipu_clk = { + .name = "ipu_clk", + .parent = &mcu_main_clk, + .get_rate = _clk_hsp_get_rate, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR1, + .enable_shift = MXC_CCM_CGR1_IPU_OFFSET, + .disable = _clk_disable, +}; + +static struct clk kpp_clk = { + .name = "kpp_clk", + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR1, + .enable_shift = MXC_CCM_CGR1_KPP_OFFSET, + .disable = _clk_disable, +}; + +static struct clk wdog_clk = { + .name = "wdog_clk", + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR1, + .enable_shift = MXC_CCM_CGR1_WDOG_OFFSET, + .disable = _clk_disable, +}; +static struct clk rtc_clk = { + .name = "rtc_clk", + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR1, + .enable_shift = MXC_CCM_CGR1_RTC_OFFSET, + .disable = _clk_disable, +}; + +static struct clk usb_clk[] = { + { + .name = "usb_clk", + .parent = &usb_pll_clk, + .get_rate = _clk_usb_get_rate,}, + { + .name = "usb_ahb_clk", + .parent = &ahb_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR1, + .enable_shift = MXC_CCM_CGR1_USBOTG_OFFSET, + .disable = _clk_disable,}, +}; + +static struct clk csi_clk = { + .name = "csi_clk", + .parent = &serial_pll_clk, + .get_rate = _clk_csi_get_rate, + .round_rate = _clk_csi_round_rate, + .set_rate = _clk_csi_set_rate, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR1, + .enable_shift = MXC_CCM_CGR1_CSI_OFFSET, + .disable = _clk_disable, +}; + +static struct clk uart_clk[] = { + { + .name = "uart_clk", + .id = 0, + .parent = &perclk_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR0, + .enable_shift = MXC_CCM_CGR0_UART1_OFFSET, + .disable = _clk_disable,}, + { + .name = "uart_clk", + .id = 1, + .parent = &perclk_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR0, + .enable_shift = MXC_CCM_CGR0_UART2_OFFSET, + .disable = _clk_disable,}, + { + .name = "uart_clk", + .id = 2, + .parent = &perclk_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR1, + .enable_shift = MXC_CCM_CGR1_UART3_OFFSET, + .disable = _clk_disable,}, + { + .name = "uart_clk", + .id = 3, + .parent = &perclk_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR1, + .enable_shift = MXC_CCM_CGR1_UART4_OFFSET, + .disable = _clk_disable,}, + { + .name = "uart_clk", + .id = 4, + .parent = &perclk_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR1, + .enable_shift = MXC_CCM_CGR1_UART5_OFFSET, + .disable = _clk_disable,}, +}; + +static struct clk i2c_clk[] = { + { + .name = "i2c_clk", + .id = 0, + .parent = &perclk_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR0, + .enable_shift = MXC_CCM_CGR0_I2C1_OFFSET, + .disable = _clk_disable,}, + { + .name = "i2c_clk", + .id = 1, + .parent = &perclk_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR0, + .enable_shift = MXC_CCM_CGR0_I2C2_OFFSET, + .disable = _clk_disable,}, + { + .name = "i2c_clk", + .id = 2, + .parent = &perclk_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR0, + .enable_shift = MXC_CCM_CGR0_I2C3_OFFSET, + .disable = _clk_disable,}, +}; + +static struct clk owire_clk = { + .name = "owire_clk", + .parent = &perclk_clk, + .enable_reg = MXC_CCM_CGR1, + .enable_shift = MXC_CCM_CGR1_OWIRE_OFFSET, + .enable = _clk_enable, + .disable = _clk_disable, +}; + +static struct clk sdhc_clk[] = { + { + .name = "sdhc_clk", + .id = 0, + .parent = &perclk_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR0, + .enable_shift = MXC_CCM_CGR0_SD_MMC1_OFFSET, + .disable = _clk_disable,}, + { + .name = "sdhc_clk", + .id = 1, + .parent = &perclk_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR0, + .enable_shift = MXC_CCM_CGR0_SD_MMC2_OFFSET, + .disable = _clk_disable,}, +}; + +static struct clk ssi_clk[] = { + { + .name = "ssi_clk", + .parent = &serial_pll_clk, + .get_rate = _clk_ssi1_get_rate, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR0, + .enable_shift = MXC_CCM_CGR0_SSI1_OFFSET, + .disable = _clk_disable,}, + { + .name = "ssi_clk", + .id = 1, + .parent = &serial_pll_clk, + .get_rate = _clk_ssi2_get_rate, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR2, + .enable_shift = MXC_CCM_CGR2_SSI2_OFFSET, + .disable = _clk_disable,}, +}; + +static struct clk firi_clk = { + .name = "firi_clk", + .parent = &usb_pll_clk, + .round_rate = _clk_firi_round_rate, + .set_rate = _clk_firi_set_rate, + .get_rate = _clk_firi_get_rate, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR2, + .enable_shift = MXC_CCM_CGR2_FIRI_OFFSET, + .disable = _clk_disable, +}; + +static struct clk ata_clk = { + .name = "ata_clk", + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR0, + .enable_shift = MXC_CCM_CGR0_ATA_OFFSET, + .disable = _clk_disable, +}; + +static struct clk mbx_clk = { + .name = "mbx_clk", + .parent = &ahb_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR2, + .enable_shift = MXC_CCM_CGR2_GACC_OFFSET, + .get_rate = _clk_mbx_get_rate, +}; + +static struct clk vpu_clk = { + .name = "vpu_clk", + .parent = &ahb_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR2, + .enable_shift = MXC_CCM_CGR2_GACC_OFFSET, + .get_rate = _clk_mbx_get_rate, +}; + +static struct clk rtic_clk = { + .name = "rtic_clk", + .parent = &ahb_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR2, + .enable_shift = MXC_CCM_CGR2_RTIC_OFFSET, + .disable = _clk_disable, +}; + +static struct clk rng_clk = { + .name = "rng_clk", + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR0, + .enable_shift = MXC_CCM_CGR0_RNG_OFFSET, + .disable = _clk_disable, +}; + +static struct clk sdma_clk[] = { + { + .name = "sdma_ahb_clk", + .parent = &ahb_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR0, + .enable_shift = MXC_CCM_CGR0_SDMA_OFFSET, + .disable = _clk_disable,}, + { + .name = "sdma_ipg_clk", + .parent = &ipg_clk,} +}; + +static struct clk mpeg4_clk = { + .name = "mpeg4_clk", + .parent = &ahb_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR1, + .enable_shift = MXC_CCM_CGR1_HANTRO_OFFSET, + .disable = _clk_disable, +}; + +static struct clk vl2cc_clk = { + .name = "vl2cc_clk", + .parent = &ahb_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR1, + .enable_shift = MXC_CCM_CGR1_HANTRO_OFFSET, + .disable = _clk_disable, +}; + +static struct clk mstick_clk[] = { + { + .name = "mstick_clk", + .id = 0, + .parent = &usb_pll_clk, + .get_rate = _clk_mstick1_get_rate, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR1, + .enable_shift = MXC_CCM_CGR1_MEMSTICK1_OFFSET, + .disable = _clk_disable,}, + { + .name = "mstick_clk", + .id = 1, + .parent = &usb_pll_clk, + .get_rate = _clk_mstick2_get_rate, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR1, + .enable_shift = MXC_CCM_CGR1_MEMSTICK2_OFFSET, + .disable = _clk_disable,}, +}; + +static struct clk iim_clk = { + .name = "iim_clk", + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR0, + .enable_shift = MXC_CCM_CGR0_IIM_OFFSET, + .disable = _clk_disable, +}; + +static unsigned long _clk_cko1_round_rate(struct clk *clk, unsigned long rate) +{ + u32 div, parent = clk_get_rate(clk->parent); + + div = parent / rate; + if (parent % rate) + div++; + + if (div > 8) + div = 16; + else if (div > 4) + div = 8; + else if (div > 2) + div = 4; + + return parent / div; +} + +static int _clk_cko1_set_rate(struct clk *clk, unsigned long rate) +{ + u32 reg, div, parent = clk_get_rate(clk->parent); + + div = parent / rate; + + if (div == 16) + div = 4; + else if (div == 8) + div = 3; + else if (div == 4) + div = 2; + else if (div == 2) + div = 1; + else if (div == 1) + div = 0; + else + return -EINVAL; + + reg = __raw_readl(MXC_CCM_COSR) & ~MXC_CCM_COSR_CLKOUTDIV_MASK; + reg |= div << MXC_CCM_COSR_CLKOUTDIV_OFFSET; + __raw_writel(reg, MXC_CCM_COSR); + + return 0; +} + +static unsigned long _clk_cko1_get_rate(struct clk *clk) +{ + u32 div; + + div = __raw_readl(MXC_CCM_COSR) & MXC_CCM_COSR_CLKOUTDIV_MASK >> + MXC_CCM_COSR_CLKOUTDIV_OFFSET; + + return clk_get_rate(clk->parent) / (1 << div); +} + +static int _clk_cko1_set_parent(struct clk *clk, struct clk *parent) +{ + u32 reg; + + reg = __raw_readl(MXC_CCM_COSR) & ~MXC_CCM_COSR_CLKOSEL_MASK; + + if (parent == &mcu_main_clk) + reg |= 0 << MXC_CCM_COSR_CLKOSEL_OFFSET; + else if (parent == &ipg_clk) + reg |= 1 << MXC_CCM_COSR_CLKOSEL_OFFSET; + else if (parent == &usb_pll_clk) + reg |= 2 << MXC_CCM_COSR_CLKOSEL_OFFSET; + else if (parent == mcu_main_clk.parent) + reg |= 3 << MXC_CCM_COSR_CLKOSEL_OFFSET; + else if (parent == &ahb_clk) + reg |= 5 << MXC_CCM_COSR_CLKOSEL_OFFSET; + else if (parent == &serial_pll_clk) + reg |= 7 << MXC_CCM_COSR_CLKOSEL_OFFSET; + else if (parent == &ckih_clk) + reg |= 8 << MXC_CCM_COSR_CLKOSEL_OFFSET; + else if (parent == &emi_clk) + reg |= 9 << MXC_CCM_COSR_CLKOSEL_OFFSET; + else if (parent == &ipu_clk) + reg |= 0xA << MXC_CCM_COSR_CLKOSEL_OFFSET; + else if (parent == &nfc_clk) + reg |= 0xB << MXC_CCM_COSR_CLKOSEL_OFFSET; + else if (parent == &uart_clk[0]) + reg |= 0xC << MXC_CCM_COSR_CLKOSEL_OFFSET; + else + return -EINVAL; + + __raw_writel(reg, MXC_CCM_COSR); + + return 0; +} + +static int _clk_cko1_enable(struct clk *clk) +{ + u32 reg; + + reg = __raw_readl(MXC_CCM_COSR) | MXC_CCM_COSR_CLKOEN; + __raw_writel(reg, MXC_CCM_COSR); + + return 0; +} + +static void _clk_cko1_disable(struct clk *clk) +{ + u32 reg; + + reg = __raw_readl(MXC_CCM_COSR) & ~MXC_CCM_COSR_CLKOEN; + __raw_writel(reg, MXC_CCM_COSR); +} + +static struct clk cko1_clk = { + .name = "cko1_clk", + .get_rate = _clk_cko1_get_rate, + .set_rate = _clk_cko1_set_rate, + .round_rate = _clk_cko1_round_rate, + .set_parent = _clk_cko1_set_parent, + .enable = _clk_cko1_enable, + .disable = _clk_cko1_disable, +}; + +static struct clk *mxc_clks[] = { + &ckih_clk, + &ckil_clk, + &mcu_pll_clk, + &usb_pll_clk, + &serial_pll_clk, + &mcu_main_clk, + &ahb_clk, + &per_clk, + &perclk_clk, + &cko1_clk, + &emi_clk, + &cspi_clk[0], + &cspi_clk[1], + &cspi_clk[2], + &ipg_clk, + &gpt_clk, + &pwm_clk, + &wdog_clk, + &rtc_clk, + &epit_clk[0], + &epit_clk[1], + &nfc_clk, + &ipu_clk, + &kpp_clk, + &usb_clk[0], + &usb_clk[1], + &csi_clk, + &uart_clk[0], + &uart_clk[1], + &uart_clk[2], + &uart_clk[3], + &uart_clk[4], + &i2c_clk[0], + &i2c_clk[1], + &i2c_clk[2], + &owire_clk, + &sdhc_clk[0], + &sdhc_clk[1], + &ssi_clk[0], + &ssi_clk[1], + &firi_clk, + &ata_clk, + &rtic_clk, + &rng_clk, + &sdma_clk[0], + &sdma_clk[1], + &mstick_clk[0], + &mstick_clk[1], + &scc_clk, + &iim_clk, +}; + +int __init mxc_clocks_init(unsigned long fref) +{ + u32 reg; + struct clk **clkp; + + ckih_rate = fref; + + for (clkp = mxc_clks; clkp < mxc_clks + ARRAY_SIZE(mxc_clks); clkp++) + clk_register(*clkp); + + if (cpu_is_mx31()) { + clk_register(&mpeg4_clk); + clk_register(&mbx_clk); + } else { + clk_register(&vpu_clk); + clk_register(&vl2cc_clk); + } + + /* Turn off all possible clocks */ + __raw_writel(MXC_CCM_CGR0_GPT_MASK, MXC_CCM_CGR0); + __raw_writel(0, MXC_CCM_CGR1); + + __raw_writel(MXC_CCM_CGR2_EMI_MASK | + MXC_CCM_CGR2_IPMUX1_MASK | + MXC_CCM_CGR2_IPMUX2_MASK | + MXC_CCM_CGR2_MXCCLKENSEL_MASK | /* for MX32 */ + MXC_CCM_CGR2_CHIKCAMPEN_MASK | /* for MX32 */ + MXC_CCM_CGR2_OVRVPUBUSY_MASK | /* for MX32 */ + 1 << 27 | 1 << 28, /* Bit 27 and 28 are not defined for + MX32, but still required to be set */ + MXC_CCM_CGR2); + + clk_disable(&cko1_clk); + clk_disable(&usb_pll_clk); + + pr_info("Clock input source is %ld\n", clk_get_rate(&ckih_clk)); + + clk_enable(&gpt_clk); + clk_enable(&emi_clk); + clk_enable(&iim_clk); + + clk_enable(&serial_pll_clk); + + if (mx31_revision() >= CHIP_REV_2_0) { + reg = __raw_readl(MXC_CCM_PMCR1); + /* No PLL restart on DVFS switch; enable auto EMI handshake */ + reg |= MXC_CCM_PMCR1_PLLRDIS | MXC_CCM_PMCR1_EMIRQ_EN; + __raw_writel(reg, MXC_CCM_PMCR1); + } + + return 0; +} + diff --git a/arch/arm/mach-mx3/crm_regs.h b/arch/arm/mach-mx3/crm_regs.h new file mode 100644 index 0000000..4a0e0ed --- /dev/null +++ b/arch/arm/mach-mx3/crm_regs.h @@ -0,0 +1,401 @@ +/* + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2008 by Sascha Hauer + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __ARCH_ARM_MACH_MX3_CRM_REGS_H__ +#define __ARCH_ARM_MACH_MX3_CRM_REGS_H__ + +#define CKIH_CLK_FREQ 26000000 +#define CKIH_CLK_FREQ_27MHZ 27000000 +#define CKIL_CLK_FREQ 32768 + +#define MXC_CCM_BASE IO_ADDRESS(CCM_BASE_ADDR) + +/* Register addresses */ +#define MXC_CCM_CCMR (MXC_CCM_BASE + 0x00) +#define MXC_CCM_PDR0 (MXC_CCM_BASE + 0x04) +#define MXC_CCM_PDR1 (MXC_CCM_BASE + 0x08) +#define MXC_CCM_RCSR (MXC_CCM_BASE + 0x0C) +#define MXC_CCM_MPCTL (MXC_CCM_BASE + 0x10) +#define MXC_CCM_UPCTL (MXC_CCM_BASE + 0x14) +#define MXC_CCM_SRPCTL (MXC_CCM_BASE + 0x18) +#define MXC_CCM_COSR (MXC_CCM_BASE + 0x1C) +#define MXC_CCM_CGR0 (MXC_CCM_BASE + 0x20) +#define MXC_CCM_CGR1 (MXC_CCM_BASE + 0x24) +#define MXC_CCM_CGR2 (MXC_CCM_BASE + 0x28) +#define MXC_CCM_WIMR (MXC_CCM_BASE + 0x2C) +#define MXC_CCM_LDC (MXC_CCM_BASE + 0x30) +#define MXC_CCM_DCVR0 (MXC_CCM_BASE + 0x34) +#define MXC_CCM_DCVR1 (MXC_CCM_BASE + 0x38) +#define MXC_CCM_DCVR2 (MXC_CCM_BASE + 0x3C) +#define MXC_CCM_DCVR3 (MXC_CCM_BASE + 0x40) +#define MXC_CCM_LTR0 (MXC_CCM_BASE + 0x44) +#define MXC_CCM_LTR1 (MXC_CCM_BASE + 0x48) +#define MXC_CCM_LTR2 (MXC_CCM_BASE + 0x4C) +#define MXC_CCM_LTR3 (MXC_CCM_BASE + 0x50) +#define MXC_CCM_LTBR0 (MXC_CCM_BASE + 0x54) +#define MXC_CCM_LTBR1 (MXC_CCM_BASE + 0x58) +#define MXC_CCM_PMCR0 (MXC_CCM_BASE + 0x5C) +#define MXC_CCM_PMCR1 (MXC_CCM_BASE + 0x60) +#define MXC_CCM_PDR2 (MXC_CCM_BASE + 0x64) + +/* Register bit definitions */ +#define MXC_CCM_CCMR_WBEN (1 << 27) +#define MXC_CCM_CCMR_CSCS (1 << 25) +#define MXC_CCM_CCMR_PERCS (1 << 24) +#define MXC_CCM_CCMR_SSI1S_OFFSET 18 +#define MXC_CCM_CCMR_SSI1S_MASK (0x3 << 18) +#define MXC_CCM_CCMR_SSI2S_OFFSET 21 +#define MXC_CCM_CCMR_SSI2S_MASK (0x3 << 21) +#define MXC_CCM_CCMR_LPM_OFFSET 14 +#define MXC_CCM_CCMR_LPM_MASK (0x3 << 14) +#define MXC_CCM_CCMR_FIRS_OFFSET 11 +#define MXC_CCM_CCMR_FIRS_MASK (0x3 << 11) +#define MXC_CCM_CCMR_UPE (1 << 9) +#define MXC_CCM_CCMR_SPE (1 << 8) +#define MXC_CCM_CCMR_MDS (1 << 7) +#define MXC_CCM_CCMR_SBYCS (1 << 4) +#define MXC_CCM_CCMR_MPE (1 << 3) +#define MXC_CCM_CCMR_PRCS_OFFSET 1 +#define MXC_CCM_CCMR_PRCS_MASK (0x3 << 1) + +#define MXC_CCM_PDR0_CSI_PODF_OFFSET 26 +#define MXC_CCM_PDR0_CSI_PODF_MASK (0x3F << 26) +#define MXC_CCM_PDR0_CSI_PRDF_OFFSET 23 +#define MXC_CCM_PDR0_CSI_PRDF_MASK (0x7 << 23) +#define MXC_CCM_PDR0_PER_PODF_OFFSET 16 +#define MXC_CCM_PDR0_PER_PODF_MASK (0x1F << 16) +#define MXC_CCM_PDR0_HSP_PODF_OFFSET 11 +#define MXC_CCM_PDR0_HSP_PODF_MASK (0x7 << 11) +#define MXC_CCM_PDR0_NFC_PODF_OFFSET 8 +#define MXC_CCM_PDR0_NFC_PODF_MASK (0x7 << 8) +#define MXC_CCM_PDR0_IPG_PODF_OFFSET 6 +#define MXC_CCM_PDR0_IPG_PODF_MASK (0x3 << 6) +#define MXC_CCM_PDR0_MAX_PODF_OFFSET 3 +#define MXC_CCM_PDR0_MAX_PODF_MASK (0x7 << 3) +#define MXC_CCM_PDR0_MCU_PODF_OFFSET 0 +#define MXC_CCM_PDR0_MCU_PODF_MASK 0x7 + +#define MXC_CCM_PDR0_HSP_DIV_1 (0x0 << 11) +#define MXC_CCM_PDR0_HSP_DIV_2 (0x1 << 11) +#define MXC_CCM_PDR0_HSP_DIV_3 (0x2 << 11) +#define MXC_CCM_PDR0_HSP_DIV_4 (0x3 << 11) +#define MXC_CCM_PDR0_HSP_DIV_5 (0x4 << 11) +#define MXC_CCM_PDR0_HSP_DIV_6 (0x5 << 11) +#define MXC_CCM_PDR0_HSP_DIV_7 (0x6 << 11) +#define MXC_CCM_PDR0_HSP_DIV_8 (0x7 << 11) + +#define MXC_CCM_PDR0_IPG_DIV_1 (0x0 << 6) +#define MXC_CCM_PDR0_IPG_DIV_2 (0x1 << 6) +#define MXC_CCM_PDR0_IPG_DIV_3 (0x2 << 6) +#define MXC_CCM_PDR0_IPG_DIV_4 (0x3 << 6) + +#define MXC_CCM_PDR0_MAX_DIV_1 (0x0 << 3) +#define MXC_CCM_PDR0_MAX_DIV_2 (0x1 << 3) +#define MXC_CCM_PDR0_MAX_DIV_3 (0x2 << 3) +#define MXC_CCM_PDR0_MAX_DIV_4 (0x3 << 3) +#define MXC_CCM_PDR0_MAX_DIV_5 (0x4 << 3) +#define MXC_CCM_PDR0_MAX_DIV_6 (0x5 << 3) +#define MXC_CCM_PDR0_MAX_DIV_7 (0x6 << 3) +#define MXC_CCM_PDR0_MAX_DIV_8 (0x7 << 3) + +#define MXC_CCM_PDR0_NFC_DIV_1 (0x0 << 8) +#define MXC_CCM_PDR0_NFC_DIV_2 (0x1 << 8) +#define MXC_CCM_PDR0_NFC_DIV_3 (0x2 << 8) +#define MXC_CCM_PDR0_NFC_DIV_4 (0x3 << 8) +#define MXC_CCM_PDR0_NFC_DIV_5 (0x4 << 8) +#define MXC_CCM_PDR0_NFC_DIV_6 (0x5 << 8) +#define MXC_CCM_PDR0_NFC_DIV_7 (0x6 << 8) +#define MXC_CCM_PDR0_NFC_DIV_8 (0x7 << 8) + +#define MXC_CCM_PDR0_MCU_DIV_1 0x0 +#define MXC_CCM_PDR0_MCU_DIV_2 0x1 +#define MXC_CCM_PDR0_MCU_DIV_3 0x2 +#define MXC_CCM_PDR0_MCU_DIV_4 0x3 +#define MXC_CCM_PDR0_MCU_DIV_5 0x4 +#define MXC_CCM_PDR0_MCU_DIV_6 0x5 +#define MXC_CCM_PDR0_MCU_DIV_7 0x6 +#define MXC_CCM_PDR0_MCU_DIV_8 0x7 + +#define MXC_CCM_PDR1_USB_PRDF_OFFSET 30 +#define MXC_CCM_PDR1_USB_PRDF_MASK (0x3 << 30) +#define MXC_CCM_PDR1_USB_PODF_OFFSET 27 +#define MXC_CCM_PDR1_USB_PODF_MASK (0x7 << 27) +#define MXC_CCM_PDR1_FIRI_PRE_PODF_OFFSET 24 +#define MXC_CCM_PDR1_FIRI_PRE_PODF_MASK (0x7 << 24) +#define MXC_CCM_PDR1_FIRI_PODF_OFFSET 18 +#define MXC_CCM_PDR1_FIRI_PODF_MASK (0x3F << 18) +#define MXC_CCM_PDR1_SSI2_PRE_PODF_OFFSET 15 +#define MXC_CCM_PDR1_SSI2_PRE_PODF_MASK (0x7 << 15) +#define MXC_CCM_PDR1_SSI2_PODF_OFFSET 9 +#define MXC_CCM_PDR1_SSI2_PODF_MASK (0x3F << 9) +#define MXC_CCM_PDR1_SSI1_PRE_PODF_OFFSET 6 +#define MXC_CCM_PDR1_SSI1_PRE_PODF_MASK (0x7 << 6) +#define MXC_CCM_PDR1_SSI1_PODF_OFFSET 0 +#define MXC_CCM_PDR1_SSI1_PODF_MASK 0x3F + +/* Bit definitions for RCSR */ +#define MXC_CCM_RCSR_NF16B 0x80000000 + +/* Bit definitions for both MCU, USB and SR PLL control registers */ +#define MXC_CCM_PCTL_BRM 0x80000000 +#define MXC_CCM_PCTL_PD_OFFSET 26 +#define MXC_CCM_PCTL_PD_MASK (0xF << 26) +#define MXC_CCM_PCTL_MFD_OFFSET 16 +#define MXC_CCM_PCTL_MFD_MASK (0x3FF << 16) +#define MXC_CCM_PCTL_MFI_OFFSET 10 +#define MXC_CCM_PCTL_MFI_MASK (0xF << 10) +#define MXC_CCM_PCTL_MFN_OFFSET 0 +#define MXC_CCM_PCTL_MFN_MASK 0x3FF + +#define MXC_CCM_CGR0_SD_MMC1_OFFSET 0 +#define MXC_CCM_CGR0_SD_MMC1_MASK (0x3 << 0) +#define MXC_CCM_CGR0_SD_MMC2_OFFSET 2 +#define MXC_CCM_CGR0_SD_MMC2_MASK (0x3 << 2) +#define MXC_CCM_CGR0_GPT_OFFSET 4 +#define MXC_CCM_CGR0_GPT_MASK (0x3 << 4) +#define MXC_CCM_CGR0_EPIT1_OFFSET 6 +#define MXC_CCM_CGR0_EPIT1_MASK (0x3 << 6) +#define MXC_CCM_CGR0_EPIT2_OFFSET 8 +#define MXC_CCM_CGR0_EPIT2_MASK (0x3 << 8) +#define MXC_CCM_CGR0_IIM_OFFSET 10 +#define MXC_CCM_CGR0_IIM_MASK (0x3 << 10) +#define MXC_CCM_CGR0_ATA_OFFSET 12 +#define MXC_CCM_CGR0_ATA_MASK (0x3 << 12) +#define MXC_CCM_CGR0_SDMA_OFFSET 14 +#define MXC_CCM_CGR0_SDMA_MASK (0x3 << 14) +#define MXC_CCM_CGR0_CSPI3_OFFSET 16 +#define MXC_CCM_CGR0_CSPI3_MASK (0x3 << 16) +#define MXC_CCM_CGR0_RNG_OFFSET 18 +#define MXC_CCM_CGR0_RNG_MASK (0x3 << 18) +#define MXC_CCM_CGR0_UART1_OFFSET 20 +#define MXC_CCM_CGR0_UART1_MASK (0x3 << 20) +#define MXC_CCM_CGR0_UART2_OFFSET 22 +#define MXC_CCM_CGR0_UART2_MASK (0x3 << 22) +#define MXC_CCM_CGR0_SSI1_OFFSET 24 +#define MXC_CCM_CGR0_SSI1_MASK (0x3 << 24) +#define MXC_CCM_CGR0_I2C1_OFFSET 26 +#define MXC_CCM_CGR0_I2C1_MASK (0x3 << 26) +#define MXC_CCM_CGR0_I2C2_OFFSET 28 +#define MXC_CCM_CGR0_I2C2_MASK (0x3 << 28) +#define MXC_CCM_CGR0_I2C3_OFFSET 30 +#define MXC_CCM_CGR0_I2C3_MASK (0x3 << 30) + +#define MXC_CCM_CGR1_HANTRO_OFFSET 0 +#define MXC_CCM_CGR1_HANTRO_MASK (0x3 << 0) +#define MXC_CCM_CGR1_MEMSTICK1_OFFSET 2 +#define MXC_CCM_CGR1_MEMSTICK1_MASK (0x3 << 2) +#define MXC_CCM_CGR1_MEMSTICK2_OFFSET 4 +#define MXC_CCM_CGR1_MEMSTICK2_MASK (0x3 << 4) +#define MXC_CCM_CGR1_CSI_OFFSET 6 +#define MXC_CCM_CGR1_CSI_MASK (0x3 << 6) +#define MXC_CCM_CGR1_RTC_OFFSET 8 +#define MXC_CCM_CGR1_RTC_MASK (0x3 << 8) +#define MXC_CCM_CGR1_WDOG_OFFSET 10 +#define MXC_CCM_CGR1_WDOG_MASK (0x3 << 10) +#define MXC_CCM_CGR1_PWM_OFFSET 12 +#define MXC_CCM_CGR1_PWM_MASK (0x3 << 12) +#define MXC_CCM_CGR1_SIM_OFFSET 14 +#define MXC_CCM_CGR1_SIM_MASK (0x3 << 14) +#define MXC_CCM_CGR1_ECT_OFFSET 16 +#define MXC_CCM_CGR1_ECT_MASK (0x3 << 16) +#define MXC_CCM_CGR1_USBOTG_OFFSET 18 +#define MXC_CCM_CGR1_USBOTG_MASK (0x3 << 18) +#define MXC_CCM_CGR1_KPP_OFFSET 20 +#define MXC_CCM_CGR1_KPP_MASK (0x3 << 20) +#define MXC_CCM_CGR1_IPU_OFFSET 22 +#define MXC_CCM_CGR1_IPU_MASK (0x3 << 22) +#define MXC_CCM_CGR1_UART3_OFFSET 24 +#define MXC_CCM_CGR1_UART3_MASK (0x3 << 24) +#define MXC_CCM_CGR1_UART4_OFFSET 26 +#define MXC_CCM_CGR1_UART4_MASK (0x3 << 26) +#define MXC_CCM_CGR1_UART5_OFFSET 28 +#define MXC_CCM_CGR1_UART5_MASK (0x3 << 28) +#define MXC_CCM_CGR1_OWIRE_OFFSET 30 +#define MXC_CCM_CGR1_OWIRE_MASK (0x3 << 30) + +#define MXC_CCM_CGR2_SSI2_OFFSET 0 +#define MXC_CCM_CGR2_SSI2_MASK (0x3 << 0) +#define MXC_CCM_CGR2_CSPI1_OFFSET 2 +#define MXC_CCM_CGR2_CSPI1_MASK (0x3 << 2) +#define MXC_CCM_CGR2_CSPI2_OFFSET 4 +#define MXC_CCM_CGR2_CSPI2_MASK (0x3 << 4) +#define MXC_CCM_CGR2_GACC_OFFSET 6 +#define MXC_CCM_CGR2_GACC_MASK (0x3 << 6) +#define MXC_CCM_CGR2_EMI_OFFSET 8 +#define MXC_CCM_CGR2_EMI_MASK (0x3 << 8) +#define MXC_CCM_CGR2_RTIC_OFFSET 10 +#define MXC_CCM_CGR2_RTIC_MASK (0x3 << 10) +#define MXC_CCM_CGR2_FIRI_OFFSET 12 +#define MXC_CCM_CGR2_FIRI_MASK (0x3 << 12) +#define MXC_CCM_CGR2_IPMUX1_OFFSET 14 +#define MXC_CCM_CGR2_IPMUX1_MASK (0x3 << 14) +#define MXC_CCM_CGR2_IPMUX2_OFFSET 16 +#define MXC_CCM_CGR2_IPMUX2_MASK (0x3 << 16) + +/* These new CGR2 bits are added in MX32 */ +#define MXC_CCM_CGR2_APMSYSCLKSEL_OFFSET 18 +#define MXC_CCM_CGR2_APMSYSCLKSEL_MASK (0x3 << 18) +#define MXC_CCM_CGR2_APMSSICLKSEL_OFFSET 20 +#define MXC_CCM_CGR2_APMSSICLKSEL_MASK (0x3 << 20) +#define MXC_CCM_CGR2_APMPERCLKSEL_OFFSET 22 +#define MXC_CCM_CGR2_APMPERCLKSEL_MASK (0x3 << 22) +#define MXC_CCM_CGR2_MXCCLKENSEL_OFFSET 24 +#define MXC_CCM_CGR2_MXCCLKENSEL_MASK (0x1 << 24) +#define MXC_CCM_CGR2_CHIKCAMPEN_OFFSET 25 +#define MXC_CCM_CGR2_CHIKCAMPEN_MASK (0x1 << 25) +#define MXC_CCM_CGR2_OVRVPUBUSY_OFFSET 26 +#define MXC_CCM_CGR2_OVRVPUBUSY_MASK (0x1 << 26) +#define MXC_CCM_CGR2_APMENA_OFFSET 30 +#define MXC_CCM_CGR2_AOMENA_MASK (0x1 << 30) + +/* + * LTR0 register offsets + */ +#define MXC_CCM_LTR0_DIV3CK_OFFSET 1 +#define MXC_CCM_LTR0_DIV3CK_MASK (0x3 << 1) +#define MXC_CCM_LTR0_DNTHR_OFFSET 16 +#define MXC_CCM_LTR0_DNTHR_MASK (0x3F << 16) +#define MXC_CCM_LTR0_UPTHR_OFFSET 22 +#define MXC_CCM_LTR0_UPTHR_MASK (0x3F << 22) + +/* + * LTR1 register offsets + */ +#define MXC_CCM_LTR1_PNCTHR_OFFSET 0 +#define MXC_CCM_LTR1_PNCTHR_MASK 0x3F +#define MXC_CCM_LTR1_UPCNT_OFFSET 6 +#define MXC_CCM_LTR1_UPCNT_MASK (0xFF << 6) +#define MXC_CCM_LTR1_DNCNT_OFFSET 14 +#define MXC_CCM_LTR1_DNCNT_MASK (0xFF << 14) +#define MXC_CCM_LTR1_LTBRSR_MASK 0x400000 +#define MXC_CCM_LTR1_LTBRSR_OFFSET 22 +#define MXC_CCM_LTR1_LTBRSR 0x400000 +#define MXC_CCM_LTR1_LTBRSH 0x800000 + +/* + * LTR2 bit definitions. x ranges from 0 for WSW9 to 6 for WSW15 + */ +#define MXC_CCM_LTR2_WSW_OFFSET(x) (11 + (x) * 3) +#define MXC_CCM_LTR2_WSW_MASK(x) (0x7 << \ + MXC_CCM_LTR2_WSW_OFFSET((x))) +#define MXC_CCM_LTR2_EMAC_OFFSET 0 +#define MXC_CCM_LTR2_EMAC_MASK 0x1FF + +/* + * LTR3 bit definitions. x ranges from 0 for WSW0 to 8 for WSW8 + */ +#define MXC_CCM_LTR3_WSW_OFFSET(x) (5 + (x) * 3) +#define MXC_CCM_LTR3_WSW_MASK(x) (0x7 << \ + MXC_CCM_LTR3_WSW_OFFSET((x))) + +#define MXC_CCM_PMCR0_DFSUP1 0x80000000 +#define MXC_CCM_PMCR0_DFSUP1_SPLL (0 << 31) +#define MXC_CCM_PMCR0_DFSUP1_MPLL (1 << 31) +#define MXC_CCM_PMCR0_DFSUP0 0x40000000 +#define MXC_CCM_PMCR0_DFSUP0_PLL (0 << 30) +#define MXC_CCM_PMCR0_DFSUP0_PDR (1 << 30) +#define MXC_CCM_PMCR0_DFSUP_MASK (0x3 << 30) + +#define DVSUP_TURBO 0 +#define DVSUP_HIGH 1 +#define DVSUP_MEDIUM 2 +#define DVSUP_LOW 3 +#define MXC_CCM_PMCR0_DVSUP_TURBO (DVSUP_TURBO << 28) +#define MXC_CCM_PMCR0_DVSUP_HIGH (DVSUP_HIGH << 28) +#define MXC_CCM_PMCR0_DVSUP_MEDIUM (DVSUP_MEDIUM << 28) +#define MXC_CCM_PMCR0_DVSUP_LOW (DVSUP_LOW << 28) +#define MXC_CCM_PMCR0_DVSUP_OFFSET 28 +#define MXC_CCM_PMCR0_DVSUP_MASK (0x3 << 28) +#define MXC_CCM_PMCR0_UDSC 0x08000000 +#define MXC_CCM_PMCR0_UDSC_MASK (1 << 27) +#define MXC_CCM_PMCR0_UDSC_UP (1 << 27) +#define MXC_CCM_PMCR0_UDSC_DOWN (0 << 27) + +#define MXC_CCM_PMCR0_VSCNT_1 (0x0 << 24) +#define MXC_CCM_PMCR0_VSCNT_2 (0x1 << 24) +#define MXC_CCM_PMCR0_VSCNT_3 (0x2 << 24) +#define MXC_CCM_PMCR0_VSCNT_4 (0x3 << 24) +#define MXC_CCM_PMCR0_VSCNT_5 (0x4 << 24) +#define MXC_CCM_PMCR0_VSCNT_6 (0x5 << 24) +#define MXC_CCM_PMCR0_VSCNT_7 (0x6 << 24) +#define MXC_CCM_PMCR0_VSCNT_8 (0x7 << 24) +#define MXC_CCM_PMCR0_VSCNT_OFFSET 24 +#define MXC_CCM_PMCR0_VSCNT_MASK (0x7 << 24) +#define MXC_CCM_PMCR0_DVFEV 0x00800000 +#define MXC_CCM_PMCR0_DVFIS 0x00400000 +#define MXC_CCM_PMCR0_LBMI 0x00200000 +#define MXC_CCM_PMCR0_LBFL 0x00100000 +#define MXC_CCM_PMCR0_LBCF_4 (0x0 << 18) +#define MXC_CCM_PMCR0_LBCF_8 (0x1 << 18) +#define MXC_CCM_PMCR0_LBCF_12 (0x2 << 18) +#define MXC_CCM_PMCR0_LBCF_16 (0x3 << 18) +#define MXC_CCM_PMCR0_LBCF_OFFSET 18 +#define MXC_CCM_PMCR0_LBCF_MASK (0x3 << 18) +#define MXC_CCM_PMCR0_PTVIS 0x00020000 +#define MXC_CCM_PMCR0_UPDTEN 0x00010000 +#define MXC_CCM_PMCR0_UPDTEN_MASK (0x1 << 16) +#define MXC_CCM_PMCR0_FSVAIM 0x00008000 +#define MXC_CCM_PMCR0_FSVAI_OFFSET 13 +#define MXC_CCM_PMCR0_FSVAI_MASK (0x3 << 13) +#define MXC_CCM_PMCR0_DPVCR 0x00001000 +#define MXC_CCM_PMCR0_DPVV 0x00000800 +#define MXC_CCM_PMCR0_WFIM 0x00000400 +#define MXC_CCM_PMCR0_DRCE3 0x00000200 +#define MXC_CCM_PMCR0_DRCE2 0x00000100 +#define MXC_CCM_PMCR0_DRCE1 0x00000080 +#define MXC_CCM_PMCR0_DRCE0 0x00000040 +#define MXC_CCM_PMCR0_DCR 0x00000020 +#define MXC_CCM_PMCR0_DVFEN 0x00000010 +#define MXC_CCM_PMCR0_PTVAIM 0x00000008 +#define MXC_CCM_PMCR0_PTVAI_OFFSET 1 +#define MXC_CCM_PMCR0_PTVAI_MASK (0x3 << 1) +#define MXC_CCM_PMCR0_DPTEN 0x00000001 + +#define MXC_CCM_PMCR1_DVGP_OFFSET 0 +#define MXC_CCM_PMCR1_DVGP_MASK (0xF) + +#define MXC_CCM_PMCR1_PLLRDIS (0x1 << 7) +#define MXC_CCM_PMCR1_EMIRQ_EN (0x1 << 8) + +#define MXC_CCM_DCVR_ULV_MASK (0x3FF << 22) +#define MXC_CCM_DCVR_ULV_OFFSET 22 +#define MXC_CCM_DCVR_LLV_MASK (0x3FF << 12) +#define MXC_CCM_DCVR_LLV_OFFSET 12 +#define MXC_CCM_DCVR_ELV_MASK (0x3FF << 2) +#define MXC_CCM_DCVR_ELV_OFFSET 2 + +#define MXC_CCM_PDR2_MST2_PDF_MASK (0x3F << 7) +#define MXC_CCM_PDR2_MST2_PDF_OFFSET 7 +#define MXC_CCM_PDR2_MST1_PDF_MASK 0x3F +#define MXC_CCM_PDR2_MST1_PDF_OFFSET 0 + +#define MXC_CCM_COSR_CLKOSEL_MASK 0x0F +#define MXC_CCM_COSR_CLKOSEL_OFFSET 0 +#define MXC_CCM_COSR_CLKOUTDIV_MASK (0x07 << 6) +#define MXC_CCM_COSR_CLKOUTDIV_OFFSET 6 +#define MXC_CCM_COSR_CLKOEN (1 << 9) + +/* + * PMCR0 register offsets + */ +#define MXC_CCM_PMCR0_LBFL_OFFSET 20 +#define MXC_CCM_PMCR0_DFSUP0_OFFSET 30 +#define MXC_CCM_PMCR0_DFSUP1_OFFSET 31 + +#endif /* __ARCH_ARM_MACH_MX3_CRM_REGS_H__ */ -- cgit v1.1 From e3d13ff4b9d3b05d7a969153e2c049548e25deea Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Sat, 5 Jul 2008 10:02:48 +0200 Subject: mxc: add MX3 support for i.MX internal UART driver This patch adds MX3 support for the i.MX internal uart driver. Signed-off-by: Sascha Hauer --- arch/arm/mach-mx3/Makefile | 2 +- arch/arm/mach-mx3/devices.c | 153 ++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 154 insertions(+), 1 deletion(-) create mode 100644 arch/arm/mach-mx3/devices.c (limited to 'arch') diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile index febb37f..a788cb0 100644 --- a/arch/arm/mach-mx3/Makefile +++ b/arch/arm/mach-mx3/Makefile @@ -4,5 +4,5 @@ # Object file lists. -obj-y := mm.o time.o clock.o +obj-y := mm.o time.o clock.o devices.o obj-$(CONFIG_MACH_MX31ADS) += mx31ads.o diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c new file mode 100644 index 0000000..1bc6d23 --- /dev/null +++ b/arch/arm/mach-mx3/devices.c @@ -0,0 +1,153 @@ +/* + * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Sascha Hauer, kernel@pengutronix.de + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + */ + +#include +#include +#include +#include +#include + +static struct resource uart0[] = { + { + .start = UART1_BASE_ADDR, + .end = UART1_BASE_ADDR + 0x0B5, + .flags = IORESOURCE_MEM, + }, { + .start = MXC_INT_UART1, + .end = MXC_INT_UART1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device mxc_uart_device0 = { + .name = "imx-uart", + .id = 0, + .resource = uart0, + .num_resources = ARRAY_SIZE(uart0), +}; + +static struct resource uart1[] = { + { + .start = UART2_BASE_ADDR, + .end = UART2_BASE_ADDR + 0x0B5, + .flags = IORESOURCE_MEM, + }, { + .start = MXC_INT_UART2, + .end = MXC_INT_UART2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device mxc_uart_device1 = { + .name = "imx-uart", + .id = 1, + .resource = uart1, + .num_resources = ARRAY_SIZE(uart1), +}; + +static struct resource uart2[] = { + { + .start = UART3_BASE_ADDR, + .end = UART3_BASE_ADDR + 0x0B5, + .flags = IORESOURCE_MEM, + }, { + .start = MXC_INT_UART3, + .end = MXC_INT_UART3, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device mxc_uart_device2 = { + .name = "imx-uart", + .id = 2, + .resource = uart2, + .num_resources = ARRAY_SIZE(uart2), +}; + +static struct resource uart3[] = { + { + .start = UART4_BASE_ADDR, + .end = UART4_BASE_ADDR + 0x0B5, + .flags = IORESOURCE_MEM, + }, { + .start = MXC_INT_UART4, + .end = MXC_INT_UART4, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device mxc_uart_device3 = { + .name = "imx-uart", + .id = 3, + .resource = uart3, + .num_resources = ARRAY_SIZE(uart3), +}; + +static struct resource uart4[] = { + { + .start = UART5_BASE_ADDR, + .end = UART5_BASE_ADDR + 0x0B5, + .flags = IORESOURCE_MEM, + }, { + .start = MXC_INT_UART5, + .end = MXC_INT_UART5, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device mxc_uart_device4 = { + .name = "imx-uart", + .id = 4, + .resource = uart4, + .num_resources = ARRAY_SIZE(uart4), +}; + +/* + * Register only those UARTs that physically exist + */ +int __init imx_init_uart(int uart_no, struct imxuart_platform_data *pdata) +{ + switch (uart_no) { + case 0: + mxc_uart_device0.dev.platform_data = pdata; + platform_device_register(&mxc_uart_device0); + break; + case 1: + mxc_uart_device1.dev.platform_data = pdata; + platform_device_register(&mxc_uart_device1); + break; + case 2: + mxc_uart_device2.dev.platform_data = pdata; + platform_device_register(&mxc_uart_device2); + break; + case 3: + mxc_uart_device3.dev.platform_data = pdata; + platform_device_register(&mxc_uart_device3); + break; + case 4: + mxc_uart_device4.dev.platform_data = pdata; + platform_device_register(&mxc_uart_device4); + break; + default: + return -ENODEV; + } + + return 0; +} + -- cgit v1.1 From 07bd1a6cc7cbb3f373fbe49b204c6cde5e9155fc Mon Sep 17 00:00:00 2001 From: Juergen Beisert Date: Sat, 5 Jul 2008 10:02:49 +0200 Subject: MXC arch: Add gpio support for the whole platform This patch bases on the one from Daniel Mack. The most important change to Daniel's patch is to be more generic. This gpio routine supports at least the i.MX27 and i.MX31 processors. Signed-off-by: Juergen Beisert Acked-by: Daniel Mack --- arch/arm/Kconfig | 2 + arch/arm/mach-mx3/devices.c | 27 +++++ arch/arm/plat-mxc/Makefile | 2 +- arch/arm/plat-mxc/gpio.c | 253 ++++++++++++++++++++++++++++++++++++++++++++ arch/arm/plat-mxc/irq.c | 3 + 5 files changed, 286 insertions(+), 1 deletion(-) create mode 100644 arch/arm/plat-mxc/gpio.c (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index b786e68..5c8c1a8 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -368,6 +368,8 @@ config ARCH_NS9XXX config ARCH_MXC bool "Freescale MXC/iMX-based" select ARCH_MTD_XIP + select GENERIC_GPIO + select HAVE_GPIO_LIB help Support for Freescale MXC/iMX-based family of processors diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c index 1bc6d23..5c0320f 100644 --- a/arch/arm/mach-mx3/devices.c +++ b/arch/arm/mach-mx3/devices.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include @@ -151,3 +152,29 @@ int __init imx_init_uart(int uart_no, struct imxuart_platform_data *pdata) return 0; } +/* GPIO port description */ +static struct mxc_gpio_port imx_gpio_ports[] = { + [0] = { + .chip.label = "gpio-0", + .base = IO_ADDRESS(GPIO1_BASE_ADDR), + .irq = MXC_INT_GPIO1, + .virtual_irq_start = MXC_GPIO_INT_BASE + }, + [1] = { + .chip.label = "gpio-1", + .base = IO_ADDRESS(GPIO2_BASE_ADDR), + .irq = MXC_INT_GPIO2, + .virtual_irq_start = MXC_GPIO_INT_BASE + GPIO_NUM_PIN + }, + [2] = { + .chip.label = "gpio-2", + .base = IO_ADDRESS(GPIO3_BASE_ADDR), + .irq = MXC_INT_GPIO3, + .virtual_irq_start = MXC_GPIO_INT_BASE + GPIO_NUM_PIN * 2 + } +}; + +int __init mxc_register_gpios(void) +{ + return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports)); +} diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile index 3eb181c..66272a6 100644 --- a/arch/arm/plat-mxc/Makefile +++ b/arch/arm/plat-mxc/Makefile @@ -3,4 +3,4 @@ # # Common support -obj-y := irq.o clock.o +obj-y := irq.o clock.o gpio.o diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c new file mode 100644 index 0000000..4a77367 --- /dev/null +++ b/arch/arm/plat-mxc/gpio.c @@ -0,0 +1,253 @@ +/* + * MXC GPIO support. (c) 2008 Daniel Mack + * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * + * Based on code from Freescale, + * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#include +#include +#include +#include +#include +#include + +static struct mxc_gpio_port *mxc_gpio_ports; +static int gpio_table_size; + +/* Note: This driver assumes 32 GPIOs are handled in one register */ + +static void _clear_gpio_irqstatus(struct mxc_gpio_port *port, u32 index) +{ + __raw_writel(1 << index, port->base + GPIO_ISR); +} + +static void _set_gpio_irqenable(struct mxc_gpio_port *port, u32 index, + int enable) +{ + u32 l; + + l = __raw_readl(port->base + GPIO_IMR); + l = (l & (~(1 << index))) | (!!enable << index); + __raw_writel(l, port->base + GPIO_IMR); +} + +static void gpio_ack_irq(u32 irq) +{ + u32 gpio = irq_to_gpio(irq); + _clear_gpio_irqstatus(&mxc_gpio_ports[gpio / 32], gpio & 0x1f); +} + +static void gpio_mask_irq(u32 irq) +{ + u32 gpio = irq_to_gpio(irq); + _set_gpio_irqenable(&mxc_gpio_ports[gpio / 32], gpio & 0x1f, 0); +} + +static void gpio_unmask_irq(u32 irq) +{ + u32 gpio = irq_to_gpio(irq); + _set_gpio_irqenable(&mxc_gpio_ports[gpio / 32], gpio & 0x1f, 1); +} + +static int gpio_set_irq_type(u32 irq, u32 type) +{ + u32 gpio = irq_to_gpio(irq); + struct mxc_gpio_port *port = &mxc_gpio_ports[gpio / 32]; + u32 bit, val; + int edge; + void __iomem *reg = port->base; + + switch (type) { + case IRQT_RISING: + edge = GPIO_INT_RISE_EDGE; + break; + case IRQT_FALLING: + edge = GPIO_INT_FALL_EDGE; + break; + case IRQT_LOW: + edge = GPIO_INT_LOW_LEV; + break; + case IRQT_HIGH: + edge = GPIO_INT_HIGH_LEV; + break; + default: /* this includes IRQT_BOTHEDGE */ + return -EINVAL; + } + + reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */ + bit = gpio & 0xf; + val = __raw_readl(reg) & ~(0x3 << (bit << 1)); + __raw_writel(val | (edge << (bit << 1)), reg); + _clear_gpio_irqstatus(port, gpio & 0x1f); + + return 0; +} + +/* handle n interrupts in one status register */ +static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat) +{ + u32 gpio_irq_no; + + gpio_irq_no = port->virtual_irq_start; + for (; irq_stat != 0; irq_stat >>= 1, gpio_irq_no++) { + + if ((irq_stat & 1) == 0) + continue; + + BUG_ON(!(irq_desc[gpio_irq_no].handle_irq)); + irq_desc[gpio_irq_no].handle_irq(gpio_irq_no, + &irq_desc[gpio_irq_no]); + } +} + +#ifdef CONFIG_ARCH_MX3 +/* MX3 has one interrupt *per* gpio port */ +static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc) +{ + u32 irq_stat; + struct mxc_gpio_port *port = (struct mxc_gpio_port *)get_irq_data(irq); + + irq_stat = __raw_readl(port->base + GPIO_ISR) & + __raw_readl(port->base + GPIO_IMR); + BUG_ON(!irq_stat); + mxc_gpio_irq_handler(port, irq_stat); +} +#endif + +#ifdef CONFIG_ARCH_MX2 +/* MX2 has one interrupt *for all* gpio ports */ +static void mx2_gpio_irq_handler(u32 irq, struct irq_desc *desc) +{ + int i; + u32 irq_msk, irq_stat; + struct mxc_gpio_port *port = (struct mxc_gpio_port *)get_irq_data(irq); + + /* walk through all interrupt status registers */ + for (i = 0; i < gpio_table_size; i++) { + irq_msk = __raw_readl(port[i].base + GPIO_IMR); + if (!irq_msk) + continue; + + irq_stat = __raw_readl(port[i].base + GPIO_ISR) & irq_msk; + if (irq_stat) + mxc_gpio_irq_handler(&port[i], irq_stat); + } +} +#endif + +static struct irq_chip gpio_irq_chip = { + .ack = gpio_ack_irq, + .mask = gpio_mask_irq, + .unmask = gpio_unmask_irq, + .set_type = gpio_set_irq_type, +}; + +static void _set_gpio_direction(struct gpio_chip *chip, unsigned offset, + int dir) +{ + struct mxc_gpio_port *port = + container_of(chip, struct mxc_gpio_port, chip); + u32 l; + + l = __raw_readl(port->base + GPIO_GDIR); + if (dir) + l |= 1 << offset; + else + l &= ~(1 << offset); + __raw_writel(l, port->base + GPIO_GDIR); +} + +static void mxc_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct mxc_gpio_port *port = + container_of(chip, struct mxc_gpio_port, chip); + void __iomem *reg = port->base + GPIO_DR; + u32 l; + + l = (__raw_readl(reg) & (~(1 << offset))) | (value << offset); + __raw_writel(l, reg); +} + +static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct mxc_gpio_port *port = + container_of(chip, struct mxc_gpio_port, chip); + + return (__raw_readl(port->base + GPIO_DR) >> offset) & 1; +} + +static int mxc_gpio_direction_input(struct gpio_chip *chip, unsigned offset) +{ + _set_gpio_direction(chip, offset, 0); + return 0; +} + +static int mxc_gpio_direction_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + _set_gpio_direction(chip, offset, 1); + mxc_gpio_set(chip, offset, value); + return 0; +} + +int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt) +{ + int i, j; + + /* save for local usage */ + mxc_gpio_ports = port; + gpio_table_size = cnt; + + printk(KERN_INFO "MXC GPIO hardware\n"); + + for (i = 0; i < cnt; i++) { + /* disable the interrupt and clear the status */ + __raw_writel(0, port[i].base + GPIO_IMR); + __raw_writel(~0, port[i].base + GPIO_ISR); + for (j = port[i].virtual_irq_start; + j < port[i].virtual_irq_start + 32; j++) { + set_irq_chip(j, &gpio_irq_chip); + set_irq_handler(j, handle_edge_irq); + set_irq_flags(j, IRQF_VALID); + } + + /* register gpio chip */ + port[i].chip.direction_input = mxc_gpio_direction_input; + port[i].chip.direction_output = mxc_gpio_direction_output; + port[i].chip.get = mxc_gpio_get; + port[i].chip.set = mxc_gpio_set; + port[i].chip.base = i * 32; + port[i].chip.ngpio = 32; + + /* its a serious configuration bug when it fails */ + BUG_ON( gpiochip_add(&port[i].chip) < 0 ); + +#ifdef CONFIG_ARCH_MX3 + /* setup one handler for each entry */ + set_irq_chained_handler(port[i].irq, mx3_gpio_irq_handler); + set_irq_data(port[i].irq, &port[i]); +#endif + } + +#ifdef CONFIG_ARCH_MX2 + /* setup one handler for all GPIO interrupts */ + set_irq_chained_handler(port[0].irq, mx2_gpio_irq_handler); + set_irq_data(port[0].irq, port); +#endif + return 0; +} diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c index 2ad5a69..88f0cfa 100644 --- a/arch/arm/plat-mxc/irq.c +++ b/arch/arm/plat-mxc/irq.c @@ -71,5 +71,8 @@ void __init mxc_init_irq(void) reg |= (0xF << 28); __raw_writel(reg, AVIC_NIPRIORITY6); + /* init architectures chained interrupt handler */ + mxc_register_gpios(); + printk(KERN_INFO "MXC IRQ initialized\n"); } -- cgit v1.1 From 90292ea60f1c730efb9fea02b2e12676da89ebef Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Sat, 5 Jul 2008 10:02:50 +0200 Subject: MXC: add io multiplexing functions for mx3 This patch adds functions to use the io multiplexer on mx3 platforms. Signed-off-by: Sascha Hauer --- arch/arm/mach-mx3/Makefile | 2 +- arch/arm/mach-mx3/iomux.c | 111 +++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 112 insertions(+), 1 deletion(-) create mode 100644 arch/arm/mach-mx3/iomux.c (limited to 'arch') diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile index a788cb0..68f062b 100644 --- a/arch/arm/mach-mx3/Makefile +++ b/arch/arm/mach-mx3/Makefile @@ -4,5 +4,5 @@ # Object file lists. -obj-y := mm.o time.o clock.o devices.o +obj-y := mm.o time.o clock.o devices.o iomux.o obj-$(CONFIG_MACH_MX31ADS) += mx31ads.o diff --git a/arch/arm/mach-mx3/iomux.c b/arch/arm/mach-mx3/iomux.c new file mode 100644 index 0000000..adc51fe --- /dev/null +++ b/arch/arm/mach-mx3/iomux.c @@ -0,0 +1,111 @@ +/* + * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2008 by Sascha Hauer + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#include +#include +#include +#include +#include +#include +#include + +/* + * IOMUX register (base) addresses + */ +#define IOMUX_BASE IO_ADDRESS(IOMUXC_BASE_ADDR) +#define IOMUXINT_OBS1 (IOMUX_BASE + 0x000) +#define IOMUXINT_OBS2 (IOMUX_BASE + 0x004) +#define IOMUXGPR (IOMUX_BASE + 0x008) +#define IOMUXSW_MUX_CTL (IOMUX_BASE + 0x00C) +#define IOMUXSW_PAD_CTL (IOMUX_BASE + 0x154) + +static DEFINE_SPINLOCK(gpio_mux_lock); + +#define IOMUX_REG_MASK (IOMUX_PADNUM_MASK & ~0x3) +/* + * set the mode for a IOMUX pin. + */ +int mxc_iomux_mode(unsigned int pin_mode) +{ + u32 reg, field, l, mode, ret = 0; + + reg = IOMUXSW_MUX_CTL + (pin_mode & IOMUX_REG_MASK); + field = pin_mode & 0x3; + mode = (pin_mode & IOMUX_MODE_MASK) >> IOMUX_MODE_SHIFT; + + pr_debug("%s: reg offset = 0x%x field = %d mode = 0x%02x\n", + __func__, (pin_mode & IOMUX_REG_MASK), field, mode); + + spin_lock(&gpio_mux_lock); + + l = __raw_readl(reg); + l &= ~(0xff << (field * 8)); + l |= mode << (field * 8); + __raw_writel(l, reg); + + spin_unlock(&gpio_mux_lock); + + return ret; +} +EXPORT_SYMBOL(mxc_iomux_mode); + +/* + * This function configures the pad value for a IOMUX pin. + */ +void mxc_iomux_set_pad(enum iomux_pins pin, u32 config) +{ + u32 reg, field, l; + + reg = IOMUXSW_PAD_CTL + (pin + 2) / 3; + field = (pin + 2) % 3; + + pr_debug("%s: reg offset = 0x%x field = %d\n", + __func__, (pin + 2) / 3, field); + + spin_lock(&gpio_mux_lock); + + l = __raw_readl(reg); + l &= ~(0x1ff << (field * 9)); + l |= config << (field * 9); + __raw_writel(l, reg); + + spin_unlock(&gpio_mux_lock); +} +EXPORT_SYMBOL(mxc_iomux_set_pad); + +/* + * This function enables/disables the general purpose function for a particular + * signal. + */ +void mxc_iomux_set_gpr(enum iomux_gp_func gp, bool en) +{ + u32 l; + + spin_lock(&gpio_mux_lock); + l = __raw_readl(IOMUXGPR); + if (en) + l |= gp; + else + l &= ~gp; + + __raw_writel(l, IOMUXGPR); + spin_unlock(&gpio_mux_lock); +} +EXPORT_SYMBOL(mxc_iomux_set_gpr); + -- cgit v1.1 From d0f349fbce2905607e0473d2358f97f48866e52c Mon Sep 17 00:00:00 2001 From: Juergen Beisert Date: Sat, 5 Jul 2008 10:02:50 +0200 Subject: i.MXC family: Adding timer support This patch adds timer support for the i.MX machine family. This code can be used on the following machs: - i.MX1 (tested) - i.MX2 (i.MX21 (to be tested), i.MX27 (tested)) - i.MX3 (i.MX31 (tested)) TODO: It seems impossible to build a kernel for more than one CPU because the timer do not follow the platform device rules. So it does only work if timer 1 can be accessed on all CPUs at the same address. Signed-off-by: Juergen Beisert Signed-off-by: Sascha Hauer --- arch/arm/Kconfig | 2 + arch/arm/mach-mx3/Makefile | 2 +- arch/arm/mach-mx3/mx31ads.c | 13 ++- arch/arm/mach-mx3/time.c | 148 ---------------------------- arch/arm/plat-mxc/Makefile | 2 +- arch/arm/plat-mxc/time.c | 228 ++++++++++++++++++++++++++++++++++++++++++++ 6 files changed, 244 insertions(+), 151 deletions(-) delete mode 100644 arch/arm/mach-mx3/time.c create mode 100644 arch/arm/plat-mxc/time.c (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 5c8c1a8..8a9a84c 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -367,6 +367,8 @@ config ARCH_NS9XXX config ARCH_MXC bool "Freescale MXC/iMX-based" + select GENERIC_TIME + select GENERIC_CLOCKEVENTS select ARCH_MTD_XIP select GENERIC_GPIO select HAVE_GPIO_LIB diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile index 68f062b..562c75d 100644 --- a/arch/arm/mach-mx3/Makefile +++ b/arch/arm/mach-mx3/Makefile @@ -4,5 +4,5 @@ # Object file lists. -obj-y := mm.o time.o clock.o devices.o iomux.o +obj-y := mm.o clock.o devices.o iomux.o obj-$(CONFIG_MACH_MX31ADS) += mx31ads.o diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c index 5addbb7..eba3e0c 100644 --- a/arch/arm/mach-mx3/mx31ads.c +++ b/arch/arm/mach-mx3/mx31ads.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include #include @@ -127,6 +128,16 @@ static void __init mxc_board_init(void) mxc_init_extuart(); } +static void __init mx31ads_timer_init(void) +{ + mxc_clocks_init(26000000); + mxc_timer_init("ipg_clk.0"); +} + +struct sys_timer mx31ads_timer = { + .init = mx31ads_timer_init, +}; + /* * The following uses standard kernel macros defined in arch.h in order to * initialize __mach_desc_MX31ADS data structure. @@ -139,5 +150,5 @@ MACHINE_START(MX31ADS, "Freescale MX31ADS") .map_io = mx31ads_map_io, .init_irq = mxc_init_irq, .init_machine = mxc_board_init, - .timer = &mxc_timer, + .timer = &mx31ads_timer, MACHINE_END diff --git a/arch/arm/mach-mx3/time.c b/arch/arm/mach-mx3/time.c deleted file mode 100644 index fb565c9..0000000 --- a/arch/arm/mach-mx3/time.c +++ /dev/null @@ -1,148 +0,0 @@ -/* - * System Timer Interrupt reconfigured to run in free-run mode. - * Author: Vitaly Wool - * Copyright 2004 MontaVista Software Inc. - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -/*! - * @file time.c - * @brief This file contains OS tick and wdog timer implementations. - * - * This file contains OS tick and wdog timer implementations. - * - * @ingroup Timers - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -/*! - * This is the timer interrupt service routine to do required tasks. - * It also services the WDOG timer at the frequency of twice per WDOG - * timeout value. For example, if the WDOG's timeout value is 4 (2 - * seconds since the WDOG runs at 0.5Hz), it will be serviced once - * every 2/2=1 second. - * - * @param irq GPT interrupt source number (not used) - * @param dev_id this parameter is not used - * @return always returns \b IRQ_HANDLED as defined in - * include/linux/interrupt.h. - */ -static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id) -{ - unsigned int next_match; - - if (__raw_readl(MXC_GPT_GPTSR) & GPTSR_OF1) { - do { - timer_tick(); - next_match = __raw_readl(MXC_GPT_GPTOCR1) + LATCH; - __raw_writel(GPTSR_OF1, MXC_GPT_GPTSR); - __raw_writel(next_match, MXC_GPT_GPTOCR1); - } while ((signed long)(next_match - - __raw_readl(MXC_GPT_GPTCNT)) <= 0); - } - - return IRQ_HANDLED; -} - -/*! - * This function is used to obtain the number of microseconds since the last - * timer interrupt. Note that interrupts is disabled by do_gettimeofday(). - * - * @return the number of microseconds since the last timer interrupt. - */ -static unsigned long mxc_gettimeoffset(void) -{ - unsigned long ticks_to_match, elapsed, usec, tick_usec, i; - - /* Get ticks before next timer match */ - ticks_to_match = - __raw_readl(MXC_GPT_GPTOCR1) - __raw_readl(MXC_GPT_GPTCNT); - - /* We need elapsed ticks since last match */ - elapsed = LATCH - ticks_to_match; - - /* Now convert them to usec */ - /* Insure no overflow when calculating the usec below */ - for (i = 1, tick_usec = tick_nsec / 1000;; i *= 2) { - tick_usec /= i; - if ((0xFFFFFFFF / tick_usec) > elapsed) - break; - } - usec = (unsigned long)(elapsed * tick_usec) / (LATCH / i); - - return usec; -} - -/*! - * The OS tick timer interrupt structure. - */ -static struct irqaction timer_irq = { - .name = "MXC Timer Tick", - .flags = IRQF_DISABLED | IRQF_TIMER, - .handler = mxc_timer_interrupt -}; - -/*! - * This function is used to initialize the GPT to produce an interrupt - * based on HZ. It is called by start_kernel() during system startup. - */ -void __init mxc_init_time(void) -{ - u32 reg, v; - reg = __raw_readl(MXC_GPT_GPTCR); - reg &= ~GPTCR_ENABLE; - __raw_writel(reg, MXC_GPT_GPTCR); - reg |= GPTCR_SWR; - __raw_writel(reg, MXC_GPT_GPTCR); - - while ((__raw_readl(MXC_GPT_GPTCR) & GPTCR_SWR) != 0) - cpu_relax(); - - reg = GPTCR_FRR | GPTCR_CLKSRC_HIGHFREQ; - __raw_writel(reg, MXC_GPT_GPTCR); - - /* TODO: get timer rate from clk driver */ - v = 66500000; - - __raw_writel((v / CLOCK_TICK_RATE) - 1, MXC_GPT_GPTPR); - - if ((v % CLOCK_TICK_RATE) != 0) { - pr_info("\nWARNING: Can't generate CLOCK_TICK_RATE at %d Hz\n", - CLOCK_TICK_RATE); - } - pr_info("Actual CLOCK_TICK_RATE is %d Hz\n", - v / ((__raw_readl(MXC_GPT_GPTPR) & 0xFFF) + 1)); - - reg = __raw_readl(MXC_GPT_GPTCNT); - reg += LATCH; - __raw_writel(reg, MXC_GPT_GPTOCR1); - - setup_irq(MXC_INT_GPT, &timer_irq); - - reg = __raw_readl(MXC_GPT_GPTCR); - reg = - GPTCR_FRR | GPTCR_CLKSRC_HIGHFREQ | GPTCR_STOPEN | GPTCR_DOZEN | - GPTCR_WAITEN | GPTCR_ENMOD | GPTCR_ENABLE; - __raw_writel(reg, MXC_GPT_GPTCR); - - __raw_writel(GPTIR_OF1IE, MXC_GPT_GPTIR); -} - -struct sys_timer mxc_timer = { - .init = mxc_init_time, - .offset = mxc_gettimeoffset, -}; diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile index 66272a6..e3cc25c 100644 --- a/arch/arm/plat-mxc/Makefile +++ b/arch/arm/plat-mxc/Makefile @@ -3,4 +3,4 @@ # # Common support -obj-y := irq.o clock.o gpio.o +obj-y := irq.o clock.o gpio.o time.o diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c new file mode 100644 index 0000000..3bf8634 --- /dev/null +++ b/arch/arm/plat-mxc/time.c @@ -0,0 +1,228 @@ +/* + * linux/arch/arm/plat-mxc/time.c + * + * Copyright (C) 2000-2001 Deep Blue Solutions + * Copyright (C) 2002 Shane Nay (shane@minirl.com) + * Copyright (C) 2006-2007 Pavel Pisa (ppisa@pikron.com) + * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#include +#include +#include +#include + +#include +#include +#include +#include + +static struct clock_event_device clockevent_mxc; +static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED; + +/* clock source for the timer */ +static struct clk *timer_clk; + +/* clock source */ + +static cycle_t mxc_get_cycles(void) +{ + return __raw_readl(TIMER_BASE + MXC_TCN); +} + +static struct clocksource clocksource_mxc = { + .name = "mxc_timer1", + .rating = 200, + .read = mxc_get_cycles, + .mask = CLOCKSOURCE_MASK(32), + .shift = 20, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +static int __init mxc_clocksource_init(void) +{ + unsigned int clock; + + clock = clk_get_rate(timer_clk); + + clocksource_mxc.mult = clocksource_hz2mult(clock, + clocksource_mxc.shift); + clocksource_register(&clocksource_mxc); + + return 0; +} + +/* clock event */ + +static int mxc_set_next_event(unsigned long evt, + struct clock_event_device *unused) +{ + unsigned long tcmp; + + tcmp = __raw_readl(TIMER_BASE + MXC_TCN) + evt; + __raw_writel(tcmp, TIMER_BASE + MXC_TCMP); + + return (int)(tcmp - __raw_readl(TIMER_BASE + MXC_TCN)) < 0 ? + -ETIME : 0; +} + +#ifdef DEBUG +static const char *clock_event_mode_label[] = { + [CLOCK_EVT_MODE_PERIODIC] = "CLOCK_EVT_MODE_PERIODIC", + [CLOCK_EVT_MODE_ONESHOT] = "CLOCK_EVT_MODE_ONESHOT", + [CLOCK_EVT_MODE_SHUTDOWN] = "CLOCK_EVT_MODE_SHUTDOWN", + [CLOCK_EVT_MODE_UNUSED] = "CLOCK_EVT_MODE_UNUSED" +}; +#endif /* DEBUG */ + +static void mxc_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + unsigned long flags; + + /* + * The timer interrupt generation is disabled at least + * for enough time to call mxc_set_next_event() + */ + local_irq_save(flags); + + /* Disable interrupt in GPT module */ + gpt_irq_disable(); + + if (mode != clockevent_mode) { + /* Set event time into far-far future */ + __raw_writel(__raw_readl(TIMER_BASE + MXC_TCN) - 3, + TIMER_BASE + MXC_TCMP); + /* Clear pending interrupt */ + gpt_irq_acknowledge(); + } + +#ifdef DEBUG + printk(KERN_INFO "mxc_set_mode: changing mode from %s to %s\n", + clock_event_mode_label[clockevent_mode], + clock_event_mode_label[mode]); +#endif /* DEBUG */ + + /* Remember timer mode */ + clockevent_mode = mode; + local_irq_restore(flags); + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + printk(KERN_ERR"mxc_set_mode: Periodic mode is not " + "supported for i.MX\n"); + break; + case CLOCK_EVT_MODE_ONESHOT: + /* + * Do not put overhead of interrupt enable/disable into + * mxc_set_next_event(), the core has about 4 minutes + * to call mxc_set_next_event() or shutdown clock after + * mode switching + */ + local_irq_save(flags); + gpt_irq_enable(); + local_irq_restore(flags); + break; + case CLOCK_EVT_MODE_SHUTDOWN: + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_RESUME: + /* Left event sources disabled, no more interrupts appear */ + break; + } +} + +/* + * IRQ handler for the timer + */ +static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = &clockevent_mxc; + uint32_t tstat; + + tstat = __raw_readl(TIMER_BASE + MXC_TSTAT); + + gpt_irq_acknowledge(); + + evt->event_handler(evt); + + return IRQ_HANDLED; +} + +static struct irqaction mxc_timer_irq = { + .name = "i.MX Timer Tick", + .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .handler = mxc_timer_interrupt, +}; + +static struct clock_event_device clockevent_mxc = { + .name = "mxc_timer1", + .features = CLOCK_EVT_FEAT_ONESHOT, + .shift = 32, + .set_mode = mxc_set_mode, + .set_next_event = mxc_set_next_event, + .rating = 200, +}; + +static int __init mxc_clockevent_init(void) +{ + unsigned int clock; + + clock = clk_get_rate(timer_clk); + + clockevent_mxc.mult = div_sc(clock, NSEC_PER_SEC, + clockevent_mxc.shift); + clockevent_mxc.max_delta_ns = + clockevent_delta2ns(0xfffffffe, &clockevent_mxc); + clockevent_mxc.min_delta_ns = + clockevent_delta2ns(0xff, &clockevent_mxc); + + clockevent_mxc.cpumask = cpumask_of_cpu(0); + + clockevents_register_device(&clockevent_mxc); + + return 0; +} + +void __init mxc_timer_init(const char *clk_timer) +{ + timer_clk = clk_get(NULL, clk_timer); + if (!timer_clk) { + printk(KERN_ERR"Cannot determine timer clock. Giving up.\n"); + return; + } + + clk_enable(timer_clk); + + /* + * Initialise to a known state (all timers off, and timing reset) + */ + __raw_writel(0, TIMER_BASE + MXC_TCTL); + __raw_writel(0, TIMER_BASE + MXC_TPRER); /* see datasheet note */ + + __raw_writel(TCTL_FRR | /* free running */ + TCTL_VAL | /* set clocksource and arch specific bits */ + TCTL_TEN, /* start the timer */ + TIMER_BASE + MXC_TCTL); + + /* init and register the timer to the framework */ + mxc_clocksource_init(); + mxc_clockevent_init(); + + /* Make irqs happen */ + setup_irq(TIMER_INTERRUPT, &mxc_timer_irq); +} + -- cgit v1.1 From 1b53218bfa4c0e17fc16ff7fadb85b82bbd3c77c Mon Sep 17 00:00:00 2001 From: Juergen Beisert Date: Sat, 5 Jul 2008 10:02:51 +0200 Subject: i.MX3: Add a basic default config for the imx31ads (reference only) Currently there is a mx31ads BSP file in the kernel, but no default config file. This patch adds a basic default config for the imx31ads but it is for test purposes only to ensure the i.MX2 patch stack doesn't break the i.MX3. Note: For reference only. This configuration is untested as I have no access to an mx31ads. Signed-off-by: Juergen Beisert --- arch/arm/configs/mx31ads_defconfig | 839 +++++++++++++++++++++++++++++++++++++ 1 file changed, 839 insertions(+) create mode 100644 arch/arm/configs/mx31ads_defconfig (limited to 'arch') diff --git a/arch/arm/configs/mx31ads_defconfig b/arch/arm/configs/mx31ads_defconfig new file mode 100644 index 0000000..e052717 --- /dev/null +++ b/arch/arm/configs/mx31ads_defconfig @@ -0,0 +1,839 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.26-rc6 +# Fri Jun 20 16:21:11 2008 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_ZONE_DMA=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +CONFIG_ARCH_MXC=y +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM7X00A is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Freescale MXC Implementations +# +# CONFIG_ARCH_MX2 is not set +CONFIG_ARCH_MX3=y + +# +# MX3 Options +# +CONFIG_MACH_MX31ADS=y +# CONFIG_MACH_PCM037 is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_V6=y +# CONFIG_CPU_32v6K is not set +CONFIG_CPU_32v6=y +CONFIG_CPU_ABRT_EV6=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_V6=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V6=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_VFP=y + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_REDBOOT_PARTS=y +CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 +# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set +# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +CONFIG_MTD_MAP_BANK_WIDTH_2=y +# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +# CONFIG_MTD_CFI_I2 is not set +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +CONFIG_MTD_RAM=y +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_XIP is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +# CONFIG_BLK_DEV is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_IMX=y +CONFIG_SERIAL_IMX_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +CONFIG_HAVE_GPIO_LIB=y + +# +# GPIO Support +# + +# +# I2C GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_UIO is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_DNOTIFY is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_PRINTK_TIME=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_FRAME_POINTER=y +# CONFIG_SAMPLES is not set +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +# CONFIG_CRYPTO_HW is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_GENERIC_FIND_NEXT_BIT is not set +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y -- cgit v1.1 From ce8ffef0bfd6e55d5da3923d8e9af27c3b5c4eff Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Sat, 5 Jul 2008 10:02:52 +0200 Subject: MX31: add basic pcm037 board support This patch adds basic board support for phytecs pmc037 board. Signed-off-by: Sascha Hauer --- arch/arm/configs/pcm037_defconfig | 748 ++++++++++++++++++++++++++++++++++++++ arch/arm/mach-mx3/Kconfig | 6 + arch/arm/mach-mx3/Makefile | 1 + arch/arm/mach-mx3/pcm037.c | 130 +++++++ 4 files changed, 885 insertions(+) create mode 100644 arch/arm/configs/pcm037_defconfig create mode 100644 arch/arm/mach-mx3/pcm037.c (limited to 'arch') diff --git a/arch/arm/configs/pcm037_defconfig b/arch/arm/configs/pcm037_defconfig new file mode 100644 index 0000000..6274745 --- /dev/null +++ b/arch/arm/configs/pcm037_defconfig @@ -0,0 +1,748 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.26-rc6 +# Wed Jun 25 11:52:42 2008 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_ZONE_DMA=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +CONFIG_ARCH_MXC=y +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM7X00A is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Freescale MXC Implementations +# +CONFIG_ARCH_MX3=y + +# +# MX3 Options +# +# CONFIG_MACH_MX31ADS is not set +CONFIG_MACH_PCM037=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_V6=y +# CONFIG_CPU_32v6K is not set +CONFIG_CPU_32v6=y +CONFIG_CPU_ABRT_EV6=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_V6=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V6=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_VFP=y + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +# CONFIG_MTD_CFI_NOSWAP is not set +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x0 +CONFIG_MTD_PHYSMAP_LEN=0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +# CONFIG_BLK_DEV is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +CONFIG_SMC91X=y +# CONFIG_DM9000 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_IMX=y +CONFIG_SERIAL_IMX_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +CONFIG_HAVE_GPIO_LIB=y + +# +# GPIO Support +# + +# +# I2C GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_UIO is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_DNOTIFY is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_FRAME_POINTER=y +# CONFIG_SAMPLES is not set +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_GENERIC_FIND_NEXT_BIT is not set +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig index 5fe8606..8b7b49a 100644 --- a/arch/arm/mach-mx3/Kconfig +++ b/arch/arm/mach-mx3/Kconfig @@ -8,5 +8,11 @@ config MACH_MX31ADS Include support for MX31ADS platform. This includes specific configurations for the board and its peripherals. +config MACH_PCM037 + bool "Support Phytec pcm037 platforms" + help + Include support for Phytec pcm037 platform. This includes + specific configurations for the board and its peripherals. + endmenu diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile index 562c75d..b09ca60 100644 --- a/arch/arm/mach-mx3/Makefile +++ b/arch/arm/mach-mx3/Makefile @@ -6,3 +6,4 @@ obj-y := mm.o clock.o devices.o iomux.o obj-$(CONFIG_MACH_MX31ADS) += mx31ads.o +obj-$(CONFIG_MACH_PCM037) += pcm037.o diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c new file mode 100644 index 0000000..a34ae6d --- /dev/null +++ b/arch/arm/mach-mx3/pcm037.c @@ -0,0 +1,130 @@ +/* + * Copyright (C) 2008 Sascha Hauer, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include + +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static struct physmap_flash_data pcm037_flash_data = { + .width = 2, +}; + +static struct resource pcm037_flash_resource = { + .start = 0xa0000000, + .end = 0xa1ffffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device pcm037_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &pcm037_flash_data, + }, + .resource = &pcm037_flash_resource, + .num_resources = 1, +}; + +static struct imxuart_platform_data uart_pdata = { + .flags = 0, +}; + +static struct platform_device *devices[] __initdata = { + &pcm037_flash, +}; + +/* + * Board specific initialization. + */ +static void __init mxc_board_init(void) +{ + platform_add_devices(devices, ARRAY_SIZE(devices)); + + mxc_iomux_mode(MX31_PIN_CTS1__CTS1); + mxc_iomux_mode(MX31_PIN_RTS1__RTS1); + mxc_iomux_mode(MX31_PIN_TXD1__TXD1); + mxc_iomux_mode(MX31_PIN_RXD1__RXD1); + + imx_init_uart(0, &uart_pdata); + + mxc_iomux_mode(MX31_PIN_CSPI3_MOSI__RXD3); + mxc_iomux_mode(MX31_PIN_CSPI3_MISO__TXD3); + + imx_init_uart(2, &uart_pdata); +} + +/* + * This structure defines static mappings for the pcm037 board. + */ +static struct map_desc pcm037_io_desc[] __initdata = { + { + .virtual = AIPS1_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(AIPS1_BASE_ADDR), + .length = AIPS1_SIZE, + .type = MT_DEVICE + }, { + .virtual = AIPS2_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(AIPS2_BASE_ADDR), + .length = AIPS2_SIZE, + .type = MT_DEVICE + }, +}; + +/* + * Set up static virtual mappings. + */ +void __init pcm037_map_io(void) +{ + mxc_map_io(); + iotable_init(pcm037_io_desc, ARRAY_SIZE(pcm037_io_desc)); +} + +static void __init pcm037_timer_init(void) +{ + mxc_clocks_init(26000000); + mxc_timer_init("ipg_clk.0"); +} + +struct sys_timer pcm037_timer = { + .init = pcm037_timer_init, +}; + +MACHINE_START(PCM037, "Phytec Phycore pcm037") + /* Maintainer: Pengutronix */ + .phys_io = AIPS1_BASE_ADDR, + .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = PHYS_OFFSET + 0x100, + .map_io = pcm037_map_io, + .init_irq = mxc_init_irq, + .init_machine = mxc_board_init, + .timer = &pcm037_timer, +MACHINE_END + -- cgit v1.1 From 9a4cd7a5c836e189a1712c9ffd2d76b2302ce212 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Sat, 5 Jul 2008 10:02:53 +0200 Subject: MX3: Add basic support for LogicPD i.MX31 LiteKit MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch adds basic support for i.MX31 LiteKit by LogicPD. With printascii() in kernel/printk.c, it boots right into the rootfs-panic. Note: This is a modified version of Daniel's patch to fit into this patch stack. > On 09.06.2008, at 17:26, Russell King - ARM Linux wrote: > > > I would much prefer it if board specific includes were included by the > > code which needs them rather than in asm/arch/hardware.h.  With the > > device model, drivers shouldn't need to include any board specific > > includes - only the board specific C file should need it. > > The new version of this patch (#5102) has been uploaded to the patch > tracker this morning. Signed-off-by: Daniel Mack -- arch/arm/configs/mx31litekit_defconfig | 1100 ++++++++++++++++++++++++++++++ arch/arm/mach-mx3/Kconfig | 7 arch/arm/mach-mx3/Makefile | 1 arch/arm/mach-mx3/mx31lite.c | 96 ++ include/asm-arm/arch-mxc/board-mx31lite.h | 38 + include/asm-arm/arch-mxc/debug-macro.S | 3 6 files changed, 1245 insertions(+) --- arch/arm/configs/mx31litekit_defconfig | 1100 ++++++++++++++++++++++++++++++++ arch/arm/mach-mx3/Kconfig | 7 + arch/arm/mach-mx3/Makefile | 1 + arch/arm/mach-mx3/mx31lite.c | 96 +++ 4 files changed, 1204 insertions(+) create mode 100644 arch/arm/configs/mx31litekit_defconfig create mode 100644 arch/arm/mach-mx3/mx31lite.c (limited to 'arch') diff --git a/arch/arm/configs/mx31litekit_defconfig b/arch/arm/configs/mx31litekit_defconfig new file mode 100644 index 0000000..4f41c41 --- /dev/null +++ b/arch/arm/configs/mx31litekit_defconfig @@ -0,0 +1,1100 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.26-rc5 +# Fri Jun 13 14:23:39 2008 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +# CONFIG_GENERIC_GPIO is not set +# CONFIG_GENERIC_TIME is not set +# CONFIG_GENERIC_CLOCKEVENTS is not set +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_ZONE_DMA=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +CONFIG_ARCH_MXC=y +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM7X00A is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Freescale MXC Implementations +# +CONFIG_ARCH_MX3=y + +# +# MX3 Options +# +# CONFIG_MACH_MX31ADS is not set +CONFIG_MACH_MX31LITE=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_V6=y +# CONFIG_CPU_32v6K is not set +CONFIG_CPU_32v6=y +CONFIG_CPU_ABRT_EV6=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_V6=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V6=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCCARD=m +# CONFIG_PCMCIA_DEBUG is not set +# CONFIG_PCMCIA is not set + +# +# PC-card bridges +# + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +CONFIG_PREEMPT=y +# CONFIG_NO_IDLE_HZ is not set +CONFIG_HZ=100 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_VFP=y + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_AOUT=y +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +# CONFIG_SUSPEND is not set +# CONFIG_APM_EMULATION is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_REDBOOT_PARTS=y +CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 +# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set +# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +CONFIG_MTD_MAP_BANK_WIDTH_2=y +# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +# CONFIG_MTD_CFI_I2 is not set +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +CONFIG_MTD_RAM=y +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_XIP is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +# CONFIG_BLK_DEV is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_PASIC3 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +CONFIG_VIDEO_DEV=y +CONFIG_VIDEO_V4L2_COMMON=y +CONFIG_VIDEO_ALLOW_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +# CONFIG_DVB_CORE is not set +CONFIG_VIDEO_MEDIA=y + +# +# Multimedia drivers +# +# CONFIG_MEDIA_ATTACH is not set +CONFIG_VIDEO_V4L2=y +CONFIG_VIDEO_V4L1=y +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_CPIA2 is not set +CONFIG_V4L_USB_DRIVERS=y +# CONFIG_USB_VICAM is not set +# CONFIG_USB_IBMCAM is not set +# CONFIG_USB_KONICAWC is not set +# CONFIG_USB_QUICKCAM_MESSENGER is not set +# CONFIG_USB_ET61X251 is not set +# CONFIG_USB_OV511 is not set +# CONFIG_USB_SE401 is not set +# CONFIG_USB_SN9C102 is not set +# CONFIG_USB_STV680 is not set +# CONFIG_USB_ZC0301 is not set +# CONFIG_USB_PWC is not set +# CONFIG_USB_ZR364XX is not set +# CONFIG_USB_STKWEBCAM is not set +# CONFIG_SOC_CAMERA is not set +CONFIG_RADIO_ADAPTERS=y +# CONFIG_USB_DSBR is not set +# CONFIG_USB_SI470X is not set +CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y + +# +# Sound +# +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +# CONFIG_USB_STORAGE is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_UIO is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_DNOTIFY is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_PRINTK_TIME=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +# CONFIG_DEBUG_USER is not set +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_GENERIC_FIND_NEXT_BIT is not set +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig index 8b7b49a..db9431d 100644 --- a/arch/arm/mach-mx3/Kconfig +++ b/arch/arm/mach-mx3/Kconfig @@ -14,5 +14,12 @@ config MACH_PCM037 Include support for Phytec pcm037 platform. This includes specific configurations for the board and its peripherals. +config MACH_MX31LITE + bool "Support MX31 LITEKIT (LogicPD)" + default n + help + Include support for MX31 LITEKIT platform. This includes specific + configurations for the board and its peripherals. + endmenu diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile index b09ca60..8b21abb 100644 --- a/arch/arm/mach-mx3/Makefile +++ b/arch/arm/mach-mx3/Makefile @@ -6,4 +6,5 @@ obj-y := mm.o clock.o devices.o iomux.o obj-$(CONFIG_MACH_MX31ADS) += mx31ads.o +obj-$(CONFIG_MACH_MX31LITE) += mx31lite.o obj-$(CONFIG_MACH_PCM037) += pcm037.o diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mx31lite.c new file mode 100644 index 0000000..ea23a8e --- /dev/null +++ b/arch/arm/mach-mx3/mx31lite.c @@ -0,0 +1,96 @@ +/* + * Copyright (C) 2000 Deep Blue Solutions Ltd + * Copyright (C) 2002 Shane Nay (shane@minirl.com) + * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * This file contains the board-specific initialization routines. + */ + +/* + * This structure defines the MX31 memory map. + */ +static struct map_desc mx31lite_io_desc[] __initdata = { + { + .virtual = AIPS1_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(AIPS1_BASE_ADDR), + .length = AIPS1_SIZE, + .type = MT_NONSHARED_DEVICE + }, { + .virtual = SPBA0_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(SPBA0_BASE_ADDR), + .length = SPBA0_SIZE, + .type = MT_NONSHARED_DEVICE + }, { + .virtual = AIPS2_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(AIPS2_BASE_ADDR), + .length = AIPS2_SIZE, + .type = MT_NONSHARED_DEVICE + }, { + .virtual = CS4_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(CS4_BASE_ADDR), + .length = CS4_SIZE, + .type = MT_DEVICE + } +}; + +/* + * Set up static virtual mappings. + */ +void __init mx31lite_map_io(void) +{ + mxc_map_io(); + iotable_init(mx31lite_io_desc, ARRAY_SIZE(mx31lite_io_desc)); +} + +/* + * Board specific initialization. + */ +static void __init mxc_board_init(void) +{ +} + +/* + * The following uses standard kernel macros defined in arch.h in order to + * initialize __mach_desc_MX31LITE data structure. + */ + +MACHINE_START(MX31LITE, "LogicPD MX31 LITEKIT") + /* Maintainer: Freescale Semiconductor, Inc. */ + .phys_io = AIPS1_BASE_ADDR, + .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = PHYS_OFFSET + 0x100, + .map_io = mx31lite_map_io, + .init_irq = mxc_init_irq, + .init_machine = mxc_board_init, + .timer = &mxc_timer, +MACHINE_END -- cgit v1.1 From 9e8a30dce1bd38cf7b941c707da504d28a907f5c Mon Sep 17 00:00:00 2001 From: Juergen Beisert Date: Sat, 5 Jul 2008 10:02:53 +0200 Subject: MX3: Adapt mx31lite to new timer init style This patch converts the external "add_mx31lite-basic_defconfig.diff" to our MXC implementation. Note: This patch fixes a board reference only. Signed-off-by: Juergen Beisert --- arch/arm/mach-mx3/mx31lite.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mx31lite.c index ea23a8e..1372c1a 100644 --- a/arch/arm/mach-mx3/mx31lite.c +++ b/arch/arm/mach-mx3/mx31lite.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include #include @@ -79,6 +80,16 @@ static void __init mxc_board_init(void) { } +static void __init mx31lite_timer_init(void) +{ + mxc_clocks_init(26000000); + mxc_timer_init("ipg_clk.0"); +} + +struct sys_timer mx31lite_timer = { + .init = mx31lite_timer_init, +}; + /* * The following uses standard kernel macros defined in arch.h in order to * initialize __mach_desc_MX31LITE data structure. @@ -92,5 +103,5 @@ MACHINE_START(MX31LITE, "LogicPD MX31 LITEKIT") .map_io = mx31lite_map_io, .init_irq = mxc_init_irq, .init_machine = mxc_board_init, - .timer = &mxc_timer, + .timer = &mx31lite_timer, MACHINE_END -- cgit v1.1 From 259bcaae9a2f28d7e3303b202b64a1fb0a9ab9e4 Mon Sep 17 00:00:00 2001 From: Juergen Beisert Date: Sat, 5 Jul 2008 10:02:54 +0200 Subject: MXC arch: Simplify architecture's irq sources Simplify architecture's irq headers and sources, to share these files between MXC3 and MXC2. Signed-off-by: Juergen Beisert --- arch/arm/plat-mxc/irq.c | 67 +++++++++++++++++++++++++++++++++++++------------ 1 file changed, 51 insertions(+), 16 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c index 88f0cfa..1fbe01d 100644 --- a/arch/arm/plat-mxc/irq.c +++ b/arch/arm/plat-mxc/irq.c @@ -1,24 +1,59 @@ /* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. */ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include +#include #include -#include -#include #include +#define AVIC_BASE IO_ADDRESS(AVIC_BASE_ADDR) +#define AVIC_INTCNTL (AVIC_BASE + 0x00) /* int control reg */ +#define AVIC_NIMASK (AVIC_BASE + 0x04) /* int mask reg */ +#define AVIC_INTENNUM (AVIC_BASE + 0x08) /* int enable number reg */ +#define AVIC_INTDISNUM (AVIC_BASE + 0x0C) /* int disable number reg */ +#define AVIC_INTENABLEH (AVIC_BASE + 0x10) /* int enable reg high */ +#define AVIC_INTENABLEL (AVIC_BASE + 0x14) /* int enable reg low */ +#define AVIC_INTTYPEH (AVIC_BASE + 0x18) /* int type reg high */ +#define AVIC_INTTYPEL (AVIC_BASE + 0x1C) /* int type reg low */ +#define AVIC_NIPRIORITY7 (AVIC_BASE + 0x20) /* norm int priority lvl7 */ +#define AVIC_NIPRIORITY6 (AVIC_BASE + 0x24) /* norm int priority lvl6 */ +#define AVIC_NIPRIORITY5 (AVIC_BASE + 0x28) /* norm int priority lvl5 */ +#define AVIC_NIPRIORITY4 (AVIC_BASE + 0x2C) /* norm int priority lvl4 */ +#define AVIC_NIPRIORITY3 (AVIC_BASE + 0x30) /* norm int priority lvl3 */ +#define AVIC_NIPRIORITY2 (AVIC_BASE + 0x34) /* norm int priority lvl2 */ +#define AVIC_NIPRIORITY1 (AVIC_BASE + 0x38) /* norm int priority lvl1 */ +#define AVIC_NIPRIORITY0 (AVIC_BASE + 0x3C) /* norm int priority lvl0 */ +#define AVIC_NIVECSR (AVIC_BASE + 0x40) /* norm int vector/status */ +#define AVIC_FIVECSR (AVIC_BASE + 0x44) /* fast int vector/status */ +#define AVIC_INTSRCH (AVIC_BASE + 0x48) /* int source reg high */ +#define AVIC_INTSRCL (AVIC_BASE + 0x4C) /* int source reg low */ +#define AVIC_INTFRCH (AVIC_BASE + 0x50) /* int force reg high */ +#define AVIC_INTFRCL (AVIC_BASE + 0x54) /* int force reg low */ +#define AVIC_NIPNDH (AVIC_BASE + 0x58) /* norm int pending high */ +#define AVIC_NIPNDL (AVIC_BASE + 0x5C) /* norm int pending low */ +#define AVIC_FIPNDH (AVIC_BASE + 0x60) /* fast int pending high */ +#define AVIC_FIPNDL (AVIC_BASE + 0x64) /* fast int pending low */ + +#define SYSTEM_PREV_REG IO_ADDRESS(IIM_BASE_ADDR + 0x20) +#define SYSTEM_SREV_REG IO_ADDRESS(IIM_BASE_ADDR + 0x24) +#define IIM_PROD_REV_SH 3 +#define IIM_PROD_REV_LEN 5 + /* Disable interrupt number "irq" in the AVIC */ static void mxc_mask_irq(unsigned int irq) { @@ -32,7 +67,7 @@ static void mxc_unmask_irq(unsigned int irq) } static struct irq_chip mxc_avic_chip = { - .mask_ack = mxc_mask_irq, + .ack = mxc_mask_irq, .mask = mxc_mask_irq, .unmask = mxc_unmask_irq, }; -- cgit v1.1 From aa10abd381b9493a88f6b9e111adc79e33d548fa Mon Sep 17 00:00:00 2001 From: Juergen Beisert Date: Sat, 5 Jul 2008 10:02:55 +0200 Subject: i.MX2 family: Add GPIO multiplexing support This patch adds GPIO multiplexing support for the imx1/mxc2 family of procesors. Signed-off-by: Juergen Beisert --- arch/arm/plat-mxc/Makefile | 2 + arch/arm/plat-mxc/iomux-mx1-mx2.c | 156 ++++++++++++++++++++++++++++++++++++++ 2 files changed, 158 insertions(+) create mode 100644 arch/arm/plat-mxc/iomux-mx1-mx2.c (limited to 'arch') diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile index e3cc25c..db66e9a 100644 --- a/arch/arm/plat-mxc/Makefile +++ b/arch/arm/plat-mxc/Makefile @@ -4,3 +4,5 @@ # Common support obj-y := irq.o clock.o gpio.o time.o + +obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o diff --git a/arch/arm/plat-mxc/iomux-mx1-mx2.c b/arch/arm/plat-mxc/iomux-mx1-mx2.c new file mode 100644 index 0000000..1985571 --- /dev/null +++ b/arch/arm/plat-mxc/iomux-mx1-mx2.c @@ -0,0 +1,156 @@ +/* + * arch/arm/mach-mxc/generic.c + * + * author: Sascha Hauer + * Created: april 20th, 2004 + * Copyright: Synertronixx GmbH + * + * Common code for i.MX machines + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +void mxc_gpio_mode(int gpio_mode) +{ + unsigned int pin = gpio_mode & GPIO_PIN_MASK; + unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT; + unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> GPIO_OCR_SHIFT; + unsigned int tmp; + + /* Pullup enable */ + tmp = __raw_readl(VA_GPIO_BASE + MXC_PUEN(port)); + if (gpio_mode & GPIO_PUEN) + tmp |= (1 << pin); + else + tmp &= ~(1 << pin); + __raw_writel(tmp, VA_GPIO_BASE + MXC_PUEN(port)); + + /* Data direction */ + tmp = __raw_readl(VA_GPIO_BASE + MXC_DDIR(port)); + if (gpio_mode & GPIO_OUT) + tmp |= 1 << pin; + else + tmp &= ~(1 << pin); + __raw_writel(tmp, VA_GPIO_BASE + MXC_DDIR(port)); + + /* Primary / alternate function */ + tmp = __raw_readl(VA_GPIO_BASE + MXC_GPR(port)); + if (gpio_mode & GPIO_AF) + tmp |= (1 << pin); + else + tmp &= ~(1 << pin); + __raw_writel(tmp, VA_GPIO_BASE + MXC_GPR(port)); + + /* use as gpio? */ + tmp = __raw_readl(VA_GPIO_BASE + MXC_GIUS(port)); + if (gpio_mode & (GPIO_PF | GPIO_AF)) + tmp &= ~(1 << pin); + else + tmp |= (1 << pin); + __raw_writel(tmp, VA_GPIO_BASE + MXC_GIUS(port)); + + if (pin < 16) { + tmp = __raw_readl(VA_GPIO_BASE + MXC_OCR1(port)); + tmp &= ~(3 << (pin * 2)); + tmp |= (ocr << (pin * 2)); + __raw_writel(tmp, VA_GPIO_BASE + MXC_OCR1(port)); + + tmp = __raw_readl(VA_GPIO_BASE + MXC_ICONFA1(port)); + tmp &= ~(3 << (pin * 2)); + tmp |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << (pin * 2); + __raw_writel(tmp, VA_GPIO_BASE + MXC_ICONFA1(port)); + + tmp = __raw_readl(VA_GPIO_BASE + MXC_ICONFB1(port)); + tmp &= ~(3 << (pin * 2)); + tmp |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << (pin * 2); + __raw_writel(tmp, VA_GPIO_BASE + MXC_ICONFB1(port)); + } else { + pin -= 16; + + tmp = __raw_readl(VA_GPIO_BASE + MXC_OCR2(port)); + tmp &= ~(3 << (pin * 2)); + tmp |= (ocr << (pin * 2)); + __raw_writel(tmp, VA_GPIO_BASE + MXC_OCR2(port)); + + tmp = __raw_readl(VA_GPIO_BASE + MXC_ICONFA2(port)); + tmp &= ~(3 << (pin * 2)); + tmp |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << (pin * 2); + __raw_writel(tmp, VA_GPIO_BASE + MXC_ICONFA2(port)); + + tmp = __raw_readl(VA_GPIO_BASE + MXC_ICONFB2(port)); + tmp &= ~(3 << (pin * 2)); + tmp |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << (pin * 2); + __raw_writel(tmp, VA_GPIO_BASE + MXC_ICONFB2(port)); + } +} +EXPORT_SYMBOL(mxc_gpio_mode); + +int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count, + int alloc_mode, const char *label) +{ + const int *p = pin_list; + int i; + unsigned gpio; + unsigned mode; + + for (i = 0; i < count; i++) { + gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK); + mode = *p & ~(GPIO_PIN_MASK | GPIO_PORT_MASK); + + if (gpio >= (GPIO_PORT_MAX + 1) * 32) + goto setup_error; + + if (alloc_mode & MXC_GPIO_ALLOC_MODE_RELEASE) + gpio_free(gpio); + else if (!(alloc_mode & MXC_GPIO_ALLOC_MODE_NO_ALLOC)) + if (gpio_request(gpio, label) + && !(alloc_mode & MXC_GPIO_ALLOC_MODE_TRY_ALLOC)) + goto setup_error; + + if (!(alloc_mode & (MXC_GPIO_ALLOC_MODE_ALLOC_ONLY | + MXC_GPIO_ALLOC_MODE_RELEASE))) + mxc_gpio_mode(gpio | mode); + + p++; + } + return 0; + +setup_error: + if (alloc_mode & (MXC_GPIO_ALLOC_MODE_NO_ALLOC | + MXC_GPIO_ALLOC_MODE_TRY_ALLOC)) + return -EINVAL; + + while (p != pin_list) { + p--; + gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK); + gpio_free(gpio); + } + + return -EINVAL; +} +EXPORT_SYMBOL(mxc_gpio_setup_multiple_pins); + -- cgit v1.1 From eea643f7ff04fe17c3ff71d41a9487c0753bd821 Mon Sep 17 00:00:00 2001 From: Juergen Beisert Date: Sat, 5 Jul 2008 10:02:56 +0200 Subject: i.MX2 family: Add basic mach support (sources) This patch adds basic mach support for the mx2 processor family, based on the original freescale code and adapted to mainline kernel coding style. Signed-off-by: Juergen Beisert --- arch/arm/mach-mx2/Kconfig | 5 +++ arch/arm/mach-mx2/Makefile | 7 ++++ arch/arm/mach-mx2/Makefile.boot | 3 ++ arch/arm/mach-mx2/generic.c | 74 +++++++++++++++++++++++++++++++++++++++++ arch/arm/mach-mx2/system.c | 63 +++++++++++++++++++++++++++++++++++ 5 files changed, 152 insertions(+) create mode 100644 arch/arm/mach-mx2/Kconfig create mode 100644 arch/arm/mach-mx2/Makefile create mode 100644 arch/arm/mach-mx2/Makefile.boot create mode 100644 arch/arm/mach-mx2/generic.c create mode 100644 arch/arm/mach-mx2/system.c (limited to 'arch') diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig new file mode 100644 index 0000000..23def05 --- /dev/null +++ b/arch/arm/mach-mx2/Kconfig @@ -0,0 +1,5 @@ +comment "MX2 family CPU support" + depends on ARCH_MX2 + +comment "MX2 Platforms" + depends on ARCH_MX2 diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile new file mode 100644 index 0000000..937192d --- /dev/null +++ b/arch/arm/mach-mx2/Makefile @@ -0,0 +1,7 @@ +# +# Makefile for the linux kernel. +# + +# Object file lists. + +obj-y := system.o generic.o diff --git a/arch/arm/mach-mx2/Makefile.boot b/arch/arm/mach-mx2/Makefile.boot new file mode 100644 index 0000000..696831dcd --- /dev/null +++ b/arch/arm/mach-mx2/Makefile.boot @@ -0,0 +1,3 @@ + zreladdr-y := 0xA0008000 +params_phys-y := 0xA0000100 +initrd_phys-y := 0xA0800000 diff --git a/arch/arm/mach-mx2/generic.c b/arch/arm/mach-mx2/generic.c new file mode 100644 index 0000000..07875cf --- /dev/null +++ b/arch/arm/mach-mx2/generic.c @@ -0,0 +1,74 @@ +/* + * generic.c + * + * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#include +#include +#include +#include +#include + +/* MX27 memory map definition */ +static struct map_desc mxc_io_desc[] __initdata = { + /* + * this fixed mapping covers: + * - AIPI1 + * - AIPI2 + * - AITC + * - ROM Patch + * - and some reserved space + */ + { + .virtual = AIPI_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(AIPI_BASE_ADDR), + .length = AIPI_SIZE, + .type = MT_DEVICE + }, + /* + * this fixed mapping covers: + * - CSI + * - ATA + */ + { + .virtual = SAHB1_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(SAHB1_BASE_ADDR), + .length = SAHB1_SIZE, + .type = MT_DEVICE + }, + /* + * this fixed mapping covers: + * - EMI + */ + { + .virtual = X_MEMC_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(X_MEMC_BASE_ADDR), + .length = X_MEMC_SIZE, + .type = MT_DEVICE + } +}; + +/* + * Initialize the memory map. It is called during the + * system startup to create static physical to virtual + * memory map for the IO modules. + */ +void __init mxc_map_io(void) +{ + iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc)); +} diff --git a/arch/arm/mach-mx2/system.c b/arch/arm/mach-mx2/system.c new file mode 100644 index 0000000..9930464 --- /dev/null +++ b/arch/arm/mach-mx2/system.c @@ -0,0 +1,63 @@ +/* + * Copyright (C) 1999 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd + * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include + +#include +#include +#include + +/* + * Put the CPU into idle mode. It is called by default_idle() + * in process.c file. + */ +void arch_idle(void) +{ + /* + * This should do all the clock switching + * and wait for interrupt tricks. + */ + cpu_do_idle(); +} + +#define WDOG_WCR_REG IO_ADDRESS(WDOG_BASE_ADDR) +#define WDOG_WCR_SRS (1 << 4) + +/* + * Reset the system. It is called by machine_restart(). + */ +void arch_reset(char mode) +{ + struct clk *clk; + + clk = clk_get(NULL, "wdog_clk"); + if (!clk) { + printk(KERN_ERR"Cannot activate the watchdog. Giving up\n"); + return; + } + + clk_enable(clk); + + /* Assert SRS signal */ + __raw_writew(__raw_readw(WDOG_WCR_REG) & ~WDOG_WCR_SRS, WDOG_WCR_REG); +} -- cgit v1.1 From 32dc80c9cb13a7ce686bcc26efcf39e35719b466 Mon Sep 17 00:00:00 2001 From: Juergen Beisert Date: Sat, 5 Jul 2008 10:02:56 +0200 Subject: i.MX2 family: Add basic mach support (headers) This patch adds basic mach support for the mx2 processor family, based on the original freescale code and adapted to mainline kernel coding style. Signed-off-by: Juergen Beisert --- arch/arm/mach-mx2/crm_regs.h | 273 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 273 insertions(+) create mode 100644 arch/arm/mach-mx2/crm_regs.h (limited to 'arch') diff --git a/arch/arm/mach-mx2/crm_regs.h b/arch/arm/mach-mx2/crm_regs.h new file mode 100644 index 0000000..a40a9b9 --- /dev/null +++ b/arch/arm/mach-mx2/crm_regs.h @@ -0,0 +1,273 @@ +/* + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __ARCH_ARM_MACH_MX2_CRM_REGS_H__ +#define __ARCH_ARM_MACH_MX2_CRM_REGS_H__ + +#include + +/* Register offsets */ +#define CCM_CSCR (IO_ADDRESS(CCM_BASE_ADDR) + 0x0) +#define CCM_MPCTL0 (IO_ADDRESS(CCM_BASE_ADDR) + 0x4) +#define CCM_MPCTL1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x8) +#define CCM_SPCTL0 (IO_ADDRESS(CCM_BASE_ADDR) + 0xC) +#define CCM_SPCTL1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x10) +#define CCM_OSC26MCTL (IO_ADDRESS(CCM_BASE_ADDR) + 0x14) +#define CCM_PCDR0 (IO_ADDRESS(CCM_BASE_ADDR) + 0x18) +#define CCM_PCDR1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x1c) +#define CCM_PCCR0 (IO_ADDRESS(CCM_BASE_ADDR) + 0x20) +#define CCM_PCCR1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x24) +#define CCM_CCSR (IO_ADDRESS(CCM_BASE_ADDR) + 0x28) +#define CCM_PMCTL (IO_ADDRESS(CCM_BASE_ADDR) + 0x2c) +#define CCM_PMCOUNT (IO_ADDRESS(CCM_BASE_ADDR) + 0x30) +#define CCM_WKGDCTL (IO_ADDRESS(CCM_BASE_ADDR) + 0x34) + +#define CCM_CSCR_USB_OFFSET 28 +#define CCM_CSCR_USB_MASK (0x7 << 28) +#define CCM_CSCR_SD_OFFSET 24 +#define CCM_CSCR_SD_MASK (0x3 << 24) +#define CCM_CSCR_SSI2 (1 << 23) +#define CCM_CSCR_SSI2_OFFSET 23 +#define CCM_CSCR_SSI1 (1 << 22) +#define CCM_CSCR_SSI1_OFFSET 22 +#define CCM_CSCR_VPU (1 << 21) +#define CCM_CSCR_VPU_OFFSET 21 +#define CCM_CSCR_MSHC (1 << 20) +#define CCM_CSCR_SPLLRES (1 << 19) +#define CCM_CSCR_MPLLRES (1 << 18) +#define CCM_CSCR_SP (1 << 17) +#define CCM_CSCR_MCU (1 << 16) +/* CCM_CSCR_ARM_xxx just be avaliable on i.MX27 TO2*/ +#define CCM_CSCR_ARM_SRC (1 << 15) +#define CCM_CSCR_ARM_OFFSET 12 +#define CCM_CSCR_ARM_MASK (0x3 << 12) +/* CCM_CSCR_ARM_xxx just be avaliable on i.MX27 TO2*/ +#define CCM_CSCR_PRESC_OFFSET 13 +#define CCM_CSCR_PRESC_MASK (0x7 << 13) +#define CCM_CSCR_BCLK_OFFSET 9 +#define CCM_CSCR_BCLK_MASK (0xf << 9) +#define CCM_CSCR_IPDIV_OFFSET 8 +#define CCM_CSCR_IPDIV (1 << 8) +/* CCM_CSCR_AHB_xxx just be avaliable on i.MX27 TO2*/ +#define CCM_CSCR_AHB_OFFSET 8 +#define CCM_CSCR_AHB_MASK (0x3 << 8) +/* CCM_CSCR_AHB_xxx just be avaliable on i.MX27 TO2*/ +#define CCM_CSCR_OSC26MDIV (1 << 4) +#define CCM_CSCR_OSC26M (1 << 3) +#define CCM_CSCR_FPM (1 << 2) +#define CCM_CSCR_SPEN (1 << 1) +#define CCM_CSCR_MPEN 1 + +#define CCM_MPCTL0_CPLM (1 << 31) +#define CCM_MPCTL0_PD_OFFSET 26 +#define CCM_MPCTL0_PD_MASK (0xf << 26) +#define CCM_MPCTL0_MFD_OFFSET 16 +#define CCM_MPCTL0_MFD_MASK (0x3ff << 16) +#define CCM_MPCTL0_MFI_OFFSET 10 +#define CCM_MPCTL0_MFI_MASK (0xf << 10) +#define CCM_MPCTL0_MFN_OFFSET 0 +#define CCM_MPCTL0_MFN_MASK 0x3ff + +#define CCM_MPCTL1_LF (1 << 15) +#define CCM_MPCTL1_BRMO (1 << 6) + +#define CCM_SPCTL0_CPLM (1 << 31) +#define CCM_SPCTL0_PD_OFFSET 26 +#define CCM_SPCTL0_PD_MASK (0xf << 26) +#define CCM_SPCTL0_MFD_OFFSET 16 +#define CCM_SPCTL0_MFD_MASK (0x3ff << 16) +#define CCM_SPCTL0_MFI_OFFSET 10 +#define CCM_SPCTL0_MFI_MASK (0xf << 10) +#define CCM_SPCTL0_MFN_OFFSET 0 +#define CCM_SPCTL0_MFN_MASK 0x3ff + +#define CCM_SPCTL1_LF (1 << 15) +#define CCM_SPCTL1_BRMO (1 << 6) + +#define CCM_OSC26MCTL_PEAK_OFFSET 16 +#define CCM_OSC26MCTL_PEAK_MASK (0x3 << 16) +#define CCM_OSC26MCTL_AGC_OFFSET 8 +#define CCM_OSC26MCTL_AGC_MASK (0x3f << 8) +#define CCM_OSC26MCTL_ANATEST_OFFSET 0 +#define CCM_OSC26MCTL_ANATEST_MASK 0x3f + +#define CCM_PCDR0_SSI2BAUDDIV_OFFSET 26 +#define CCM_PCDR0_SSI2BAUDDIV_MASK (0x3f << 26) +#define CCM_PCDR0_CLKO_EN 25 +#define CCM_PCDR0_CLKODIV_OFFSET 22 +#define CCM_PCDR0_CLKODIV_MASK (0x7 << 22) +#define CCM_PCDR0_SSI1BAUDDIV_OFFSET 16 +#define CCM_PCDR0_SSI1BAUDDIV_MASK (0x3f << 16) +/*The difinition for i.MX27 TO2*/ +#define CCM_PCDR0_VPUDIV2_OFFSET 10 +#define CCM_PCDR0_VPUDIV2_MASK (0x3f << 10) +#define CCM_PCDR0_NFCDIV2_OFFSET 6 +#define CCM_PCDR0_NFCDIV2_MASK (0xf << 6) +#define CCM_PCDR0_MSHCDIV2_MASK 0x3f +/*The difinition for i.MX27 TO2*/ +#define CCM_PCDR0_NFCDIV_OFFSET 12 +#define CCM_PCDR0_NFCDIV_MASK (0xf << 12) +#define CCM_PCDR0_VPUDIV_OFFSET 8 +#define CCM_PCDR0_VPUDIV_MASK (0xf << 8) +#define CCM_PCDR0_MSHCDIV_OFFSET 0 +#define CCM_PCDR0_MSHCDIV_MASK 0x1f + +#define CCM_PCDR1_PERDIV4_OFFSET 24 +#define CCM_PCDR1_PERDIV4_MASK (0x3f << 24) +#define CCM_PCDR1_PERDIV3_OFFSET 16 +#define CCM_PCDR1_PERDIV3_MASK (0x3f << 16) +#define CCM_PCDR1_PERDIV2_OFFSET 8 +#define CCM_PCDR1_PERDIV2_MASK (0x3f << 8) +#define CCM_PCDR1_PERDIV1_OFFSET 0 +#define CCM_PCDR1_PERDIV1_MASK 0x3f + +#define CCM_PCCR0_CSPI1_OFFSET 31 +#define CCM_PCCR0_CSPI1_MASK (1 << 31) +#define CCM_PCCR0_CSPI2_OFFSET 30 +#define CCM_PCCR0_CSPI2_MASK (1 << 30) +#define CCM_PCCR0_CSPI3_OFFSET 29 +#define CCM_PCCR0_CSPI3_MASK (1 << 29) +#define CCM_PCCR0_DMA_OFFSET 28 +#define CCM_PCCR0_DMA_MASK (1 << 28) +#define CCM_PCCR0_EMMA_OFFSET 27 +#define CCM_PCCR0_EMMA_MASK (1 << 27) +#define CCM_PCCR0_FEC_OFFSET 26 +#define CCM_PCCR0_FEC_MASK (1 << 26) +#define CCM_PCCR0_GPIO_OFFSET 25 +#define CCM_PCCR0_GPIO_MASK (1 << 25) +#define CCM_PCCR0_GPT1_OFFSET 24 +#define CCM_PCCR0_GPT1_MASK (1 << 24) +#define CCM_PCCR0_GPT2_OFFSET 23 +#define CCM_PCCR0_GPT2_MASK (1 << 23) +#define CCM_PCCR0_GPT3_OFFSET 22 +#define CCM_PCCR0_GPT3_MASK (1 << 22) +#define CCM_PCCR0_GPT4_OFFSET 21 +#define CCM_PCCR0_GPT4_MASK (1 << 21) +#define CCM_PCCR0_GPT5_OFFSET 20 +#define CCM_PCCR0_GPT5_MASK (1 << 20) +#define CCM_PCCR0_GPT6_OFFSET 19 +#define CCM_PCCR0_GPT6_MASK (1 << 19) +#define CCM_PCCR0_I2C1_OFFSET 18 +#define CCM_PCCR0_I2C1_MASK (1 << 18) +#define CCM_PCCR0_I2C2_OFFSET 17 +#define CCM_PCCR0_I2C2_MASK (1 << 17) +#define CCM_PCCR0_IIM_OFFSET 16 +#define CCM_PCCR0_IIM_MASK (1 << 16) +#define CCM_PCCR0_KPP_OFFSET 15 +#define CCM_PCCR0_KPP_MASK (1 << 15) +#define CCM_PCCR0_LCDC_OFFSET 14 +#define CCM_PCCR0_LCDC_MASK (1 << 14) +#define CCM_PCCR0_MSHC_OFFSET 13 +#define CCM_PCCR0_MSHC_MASK (1 << 13) +#define CCM_PCCR0_OWIRE_OFFSET 12 +#define CCM_PCCR0_OWIRE_MASK (1 << 12) +#define CCM_PCCR0_PWM_OFFSET 11 +#define CCM_PCCR0_PWM_MASK (1 << 11) +#define CCM_PCCR0_RTC_OFFSET 9 +#define CCM_PCCR0_RTC_MASK (1 << 9) +#define CCM_PCCR0_RTIC_OFFSET 8 +#define CCM_PCCR0_RTIC_MASK (1 << 8) +#define CCM_PCCR0_SAHARA_OFFSET 7 +#define CCM_PCCR0_SAHARA_MASK (1 << 7) +#define CCM_PCCR0_SCC_OFFSET 6 +#define CCM_PCCR0_SCC_MASK (1 << 6) +#define CCM_PCCR0_SDHC1_OFFSET 5 +#define CCM_PCCR0_SDHC1_MASK (1 << 5) +#define CCM_PCCR0_SDHC2_OFFSET 4 +#define CCM_PCCR0_SDHC2_MASK (1 << 4) +#define CCM_PCCR0_SDHC3_OFFSET 3 +#define CCM_PCCR0_SDHC3_MASK (1 << 3) +#define CCM_PCCR0_SLCDC_OFFSET 2 +#define CCM_PCCR0_SLCDC_MASK (1 << 2) +#define CCM_PCCR0_SSI1_IPG_OFFSET 1 +#define CCM_PCCR0_SSI1_IPG_MASK (1 << 1) +#define CCM_PCCR0_SSI2_IPG_OFFSET 0 +#define CCM_PCCR0_SSI2_IPG_MASK (1 << 0) + +#define CCM_PCCR1_UART1_OFFSET 31 +#define CCM_PCCR1_UART1_MASK (1 << 31) +#define CCM_PCCR1_UART2_OFFSET 30 +#define CCM_PCCR1_UART2_MASK (1 << 30) +#define CCM_PCCR1_UART3_OFFSET 29 +#define CCM_PCCR1_UART3_MASK (1 << 29) +#define CCM_PCCR1_UART4_OFFSET 28 +#define CCM_PCCR1_UART4_MASK (1 << 28) +#define CCM_PCCR1_UART5_OFFSET 27 +#define CCM_PCCR1_UART5_MASK (1 << 27) +#define CCM_PCCR1_UART6_OFFSET 26 +#define CCM_PCCR1_UART6_MASK (1 << 26) +#define CCM_PCCR1_USBOTG_OFFSET 25 +#define CCM_PCCR1_USBOTG_MASK (1 << 25) +#define CCM_PCCR1_WDT_OFFSET 24 +#define CCM_PCCR1_WDT_MASK (1 << 24) +#define CCM_PCCR1_HCLK_ATA_OFFSET 23 +#define CCM_PCCR1_HCLK_ATA_MASK (1 << 23) +#define CCM_PCCR1_HCLK_BROM_OFFSET 22 +#define CCM_PCCR1_HCLK_BROM_MASK (1 << 22) +#define CCM_PCCR1_HCLK_CSI_OFFSET 21 +#define CCM_PCCR1_HCLK_CSI_MASK (1 << 21) +#define CCM_PCCR1_HCLK_DMA_OFFSET 20 +#define CCM_PCCR1_HCLK_DMA_MASK (1 << 20) +#define CCM_PCCR1_HCLK_EMI_OFFSET 19 +#define CCM_PCCR1_HCLK_EMI_MASK (1 << 19) +#define CCM_PCCR1_HCLK_EMMA_OFFSET 18 +#define CCM_PCCR1_HCLK_EMMA_MASK (1 << 18) +#define CCM_PCCR1_HCLK_FEC_OFFSET 17 +#define CCM_PCCR1_HCLK_FEC_MASK (1 << 17) +#define CCM_PCCR1_HCLK_VPU_OFFSET 16 +#define CCM_PCCR1_HCLK_VPU_MASK (1 << 16) +#define CCM_PCCR1_HCLK_LCDC_OFFSET 15 +#define CCM_PCCR1_HCLK_LCDC_MASK (1 << 15) +#define CCM_PCCR1_HCLK_RTIC_OFFSET 14 +#define CCM_PCCR1_HCLK_RTIC_MASK (1 << 14) +#define CCM_PCCR1_HCLK_SAHARA_OFFSET 13 +#define CCM_PCCR1_HCLK_SAHARA_MASK (1 << 13) +#define CCM_PCCR1_HCLK_SLCDC_OFFSET 12 +#define CCM_PCCR1_HCLK_SLCDC_MASK (1 << 12) +#define CCM_PCCR1_HCLK_USBOTG_OFFSET 11 +#define CCM_PCCR1_HCLK_USBOTG_MASK (1 << 11) +#define CCM_PCCR1_PERCLK1_OFFSET 10 +#define CCM_PCCR1_PERCLK1_MASK (1 << 10) +#define CCM_PCCR1_PERCLK2_OFFSET 9 +#define CCM_PCCR1_PERCLK2_MASK (1 << 9) +#define CCM_PCCR1_PERCLK3_OFFSET 8 +#define CCM_PCCR1_PERCLK3_MASK (1 << 8) +#define CCM_PCCR1_PERCLK4_OFFSET 7 +#define CCM_PCCR1_PERCLK4_MASK (1 << 7) +#define CCM_PCCR1_VPU_BAUD_OFFSET 6 +#define CCM_PCCR1_VPU_BAUD_MASK (1 << 6) +#define CCM_PCCR1_SSI1_BAUD_OFFSET 5 +#define CCM_PCCR1_SSI1_BAUD_MASK (1 << 5) +#define CCM_PCCR1_SSI2_BAUD_OFFSET 4 +#define CCM_PCCR1_SSI2_BAUD_MASK (1 << 4) +#define CCM_PCCR1_NFC_BAUD_OFFSET 3 +#define CCM_PCCR1_NFC_BAUD_MASK (1 << 3) +#define CCM_PCCR1_MSHC_BAUD_OFFSET 2 +#define CCM_PCCR1_MSHC_BAUD_MASK (1 << 2) + +#define CCM_CCSR_32KSR (1 << 15) +#define CCM_CCSR_CLKMODE1 (1 << 9) +#define CCM_CCSR_CLKMODE0 (1 << 8) +#define CCM_CCSR_CLKOSEL_OFFSET 0 +#define CCM_CCSR_CLKOSEL_MASK 0x1f + +#define SYS_FMCR 0x14 /* Functional Muxing Control Reg */ +#define SYS_CHIP_ID 0x00 /* The offset of CHIP ID register */ + +#endif /* __ARCH_ARM_MACH_MX2_CRM_REGS_H__ */ -- cgit v1.1 From fc80a5e3d0480d416e4f53b0680aaf525b5076d8 Mon Sep 17 00:00:00 2001 From: Juergen Beisert Date: Sat, 5 Jul 2008 10:02:57 +0200 Subject: i.MX2 family: Add basic device support This patch adds a few on-chip devices for i.MX21/i.MX27 procesors. Signed-off-by: Juergen Beisert --- arch/arm/mach-mx2/Makefile | 2 +- arch/arm/mach-mx2/devices.c | 231 ++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 232 insertions(+), 1 deletion(-) create mode 100644 arch/arm/mach-mx2/devices.c (limited to 'arch') diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile index 937192d..db4d9c6 100644 --- a/arch/arm/mach-mx2/Makefile +++ b/arch/arm/mach-mx2/Makefile @@ -4,4 +4,4 @@ # Object file lists. -obj-y := system.o generic.o +obj-y := system.o generic.o devices.o diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c new file mode 100644 index 0000000..a1f44c3 --- /dev/null +++ b/arch/arm/mach-mx2/devices.c @@ -0,0 +1,231 @@ +/* + * Author: MontaVista Software, Inc. + * + * + * Based on the OMAP devices.c + * + * 2005 (c) MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is + * licensed "as is" without any warranty of any kind, whether express + * or implied. + * + * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ +#include +#include +#include +#include +#include + +#include + +/* + * Resource definition for the MXC IrDA + */ +static struct resource mxc_irda_resources[] = { + [0] = { + .start = UART3_BASE_ADDR, + .end = UART3_BASE_ADDR + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = MXC_INT_UART3, + .end = MXC_INT_UART3, + .flags = IORESOURCE_IRQ, + }, +}; + +/* Platform Data for MXC IrDA */ +struct platform_device mxc_irda_device = { + .name = "mxc_irda", + .id = 0, + .num_resources = ARRAY_SIZE(mxc_irda_resources), + .resource = mxc_irda_resources, +}; + +/* + * General Purpose Timer + * - i.MX1: 2 timer (slighly different register handling) + * - i.MX21: 3 timer + * - i.MX27: 6 timer + */ + +/* We use gpt0 as system timer, so do not add a device for this one */ + +static struct resource timer1_resources[] = { + [0] = { + .start = GPT2_BASE_ADDR, + .end = GPT2_BASE_ADDR + 0x17, + .flags = IORESOURCE_MEM + }, + [1] = { + .start = MXC_INT_GPT2, + .end = MXC_INT_GPT2, + .flags = IORESOURCE_IRQ, + } +}; + +struct platform_device mxc_gpt1 = { + .name = "imx_gpt", + .id = 1, + .num_resources = ARRAY_SIZE(timer1_resources), + .resource = timer1_resources +}; + +static struct resource timer2_resources[] = { + [0] = { + .start = GPT3_BASE_ADDR, + .end = GPT3_BASE_ADDR + 0x17, + .flags = IORESOURCE_MEM + }, + [1] = { + .start = MXC_INT_GPT3, + .end = MXC_INT_GPT3, + .flags = IORESOURCE_IRQ, + } +}; + +struct platform_device mxc_gpt2 = { + .name = "imx_gpt", + .id = 2, + .num_resources = ARRAY_SIZE(timer2_resources), + .resource = timer2_resources +}; + +#ifdef CONFIG_MACH_MX27 +static struct resource timer3_resources[] = { + [0] = { + .start = GPT4_BASE_ADDR, + .end = GPT4_BASE_ADDR + 0x17, + .flags = IORESOURCE_MEM + }, + [1] = { + .start = MXC_INT_GPT4, + .end = MXC_INT_GPT4, + .flags = IORESOURCE_IRQ, + } +}; + +struct platform_device mxc_gpt3 = { + .name = "imx_gpt", + .id = 3, + .num_resources = ARRAY_SIZE(timer3_resources), + .resource = timer3_resources +}; + +static struct resource timer4_resources[] = { + [0] = { + .start = GPT5_BASE_ADDR, + .end = GPT5_BASE_ADDR + 0x17, + .flags = IORESOURCE_MEM + }, + [1] = { + .start = MXC_INT_GPT5, + .end = MXC_INT_GPT5, + .flags = IORESOURCE_IRQ, + } +}; + +struct platform_device mxc_gpt4 = { + .name = "imx_gpt", + .id = 4, + .num_resources = ARRAY_SIZE(timer4_resources), + .resource = timer4_resources +}; + +static struct resource timer5_resources[] = { + [0] = { + .start = GPT6_BASE_ADDR, + .end = GPT6_BASE_ADDR + 0x17, + .flags = IORESOURCE_MEM + }, + [1] = { + .start = MXC_INT_GPT6, + .end = MXC_INT_GPT6, + .flags = IORESOURCE_IRQ, + } +}; + +struct platform_device mxc_gpt5 = { + .name = "imx_gpt", + .id = 5, + .num_resources = ARRAY_SIZE(timer5_resources), + .resource = timer5_resources +}; +#endif + +/* + * Watchdog: + * - i.MX1 + * - i.MX21 + * - i.MX27 + */ +static struct resource mxc_wdt_resources[] = { + { + .start = WDOG_BASE_ADDR, + .end = WDOG_BASE_ADDR + 0x30, + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device mxc_wdt = { + .name = "mxc_wdt", + .id = 0, + .num_resources = ARRAY_SIZE(mxc_wdt_resources), + .resource = mxc_wdt_resources, +}; + +/* GPIO port description */ +static struct mxc_gpio_port imx_gpio_ports[] = { + [0] = { + .chip.label = "gpio-0", + .irq = MXC_INT_GPIO, + .base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 0), + .virtual_irq_start = MXC_MAX_INT_LINES, + }, + [1] = { + .chip.label = "gpio-1", + .base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 1), + .virtual_irq_start = MXC_MAX_INT_LINES + 32, + }, + [2] = { + .chip.label = "gpio-2", + .base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 2), + .virtual_irq_start = MXC_MAX_INT_LINES + 64, + }, + [3] = { + .chip.label = "gpio-3", + .base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 3), + .virtual_irq_start = MXC_MAX_INT_LINES + 96, + }, + [4] = { + .chip.label = "gpio-4", + .base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 4), + .virtual_irq_start = MXC_MAX_INT_LINES + 128, + }, + [5] = { + .chip.label = "gpio-5", + .base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 5), + .virtual_irq_start = MXC_MAX_INT_LINES + 160, + } +}; + +int __init mxc_register_gpios(void) +{ + return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports)); +} -- cgit v1.1 From 604cbadce2292d979749e2f5c6c3f75ee10f4c9e Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Sat, 5 Jul 2008 10:02:58 +0200 Subject: MX2 add support for mx2 in i.MX serial driver add support for mx2 in i.MX serial driver Signed-off-by: Sascha Hauer --- arch/arm/mach-mx2/Makefile | 2 +- arch/arm/mach-mx2/serial.c | 177 +++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 178 insertions(+), 1 deletion(-) create mode 100644 arch/arm/mach-mx2/serial.c (limited to 'arch') diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile index db4d9c6..f8f8ecb 100644 --- a/arch/arm/mach-mx2/Makefile +++ b/arch/arm/mach-mx2/Makefile @@ -4,4 +4,4 @@ # Object file lists. -obj-y := system.o generic.o devices.o +obj-y := system.o generic.o devices.o serial.o diff --git a/arch/arm/mach-mx2/serial.c b/arch/arm/mach-mx2/serial.c new file mode 100644 index 0000000..570c02b --- /dev/null +++ b/arch/arm/mach-mx2/serial.c @@ -0,0 +1,177 @@ +/* + * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#include +#include +#include +#include +#include + +static struct resource uart0[] = { + { + .start = UART1_BASE_ADDR, + .end = UART1_BASE_ADDR + 0x0B5, + .flags = IORESOURCE_MEM, + }, { + .start = MXC_INT_UART1, + .end = MXC_INT_UART1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device mxc_uart_device0 = { + .name = "imx-uart", + .id = 0, + .resource = uart0, + .num_resources = ARRAY_SIZE(uart0), +}; + +static struct resource uart1[] = { + { + .start = UART2_BASE_ADDR, + .end = UART2_BASE_ADDR + 0x0B5, + .flags = IORESOURCE_MEM, + }, { + .start = MXC_INT_UART2, + .end = MXC_INT_UART2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device mxc_uart_device1 = { + .name = "imx-uart", + .id = 1, + .resource = uart1, + .num_resources = ARRAY_SIZE(uart1), +}; + +static struct resource uart2[] = { + { + .start = UART3_BASE_ADDR, + .end = UART3_BASE_ADDR + 0x0B5, + .flags = IORESOURCE_MEM, + }, { + .start = MXC_INT_UART3, + .end = MXC_INT_UART3, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device mxc_uart_device2 = { + .name = "imx-uart", + .id = 2, + .resource = uart2, + .num_resources = ARRAY_SIZE(uart2), +}; + +static struct resource uart3[] = { + { + .start = UART4_BASE_ADDR, + .end = UART4_BASE_ADDR + 0x0B5, + .flags = IORESOURCE_MEM, + }, { + .start = MXC_INT_UART4, + .end = MXC_INT_UART4, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device mxc_uart_device3 = { + .name = "imx-uart", + .id = 3, + .resource = uart3, + .num_resources = ARRAY_SIZE(uart3), +}; + +static struct resource uart4[] = { + { + .start = UART5_BASE_ADDR, + .end = UART5_BASE_ADDR + 0x0B5, + .flags = IORESOURCE_MEM, + }, { + .start = MXC_INT_UART5, + .end = MXC_INT_UART5, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device mxc_uart_device4 = { + .name = "imx-uart", + .id = 4, + .resource = uart4, + .num_resources = ARRAY_SIZE(uart4), +}; + +static struct resource uart5[] = { + { + .start = UART6_BASE_ADDR, + .end = UART6_BASE_ADDR + 0x0B5, + .flags = IORESOURCE_MEM, + }, { + .start = MXC_INT_UART6, + .end = MXC_INT_UART6, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device mxc_uart_device5 = { + .name = "imx-uart", + .id = 5, + .resource = uart5, + .num_resources = ARRAY_SIZE(uart5), +}; + +/* + * Register only those UARTs that physically exists + */ +int __init imx_init_uart(int uart_no, struct imxuart_platform_data *pdata) +{ + switch (uart_no) { + case 0: + mxc_uart_device0.dev.platform_data = pdata; + platform_device_register(&mxc_uart_device0); + break; + case 1: + mxc_uart_device1.dev.platform_data = pdata; + platform_device_register(&mxc_uart_device1); + break; +#ifndef CONFIG_MXC_IRDA + case 2: + mxc_uart_device2.dev.platform_data = pdata; + platform_device_register(&mxc_uart_device2); + break; +#endif + case 3: + mxc_uart_device3.dev.platform_data = pdata; + platform_device_register(&mxc_uart_device3); + break; + case 4: + mxc_uart_device4.dev.platform_data = pdata; + platform_device_register(&mxc_uart_device4); + break; + case 5: + mxc_uart_device5.dev.platform_data = pdata; + platform_device_register(&mxc_uart_device5); + break; + default: + return -ENODEV; + } + + return 0; +} -- cgit v1.1 From f31405cc4cc568baad28273c7f45b0563b57a17d Mon Sep 17 00:00:00 2001 From: Juergen Beisert Date: Sat, 5 Jul 2008 10:02:59 +0200 Subject: i.MX27 CPU: Add basic i.MX27 CPU support Add basic i.MX27 CPU support Signed-off-by: Juergen Beisert --- arch/arm/mach-mx2/Kconfig | 6 +++++ arch/arm/mach-mx2/Makefile | 2 ++ arch/arm/mach-mx2/cpu_imx27.c | 63 +++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 71 insertions(+) create mode 100644 arch/arm/mach-mx2/cpu_imx27.c (limited to 'arch') diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig index 23def05..6e7d724 100644 --- a/arch/arm/mach-mx2/Kconfig +++ b/arch/arm/mach-mx2/Kconfig @@ -1,5 +1,11 @@ comment "MX2 family CPU support" depends on ARCH_MX2 +config MACH_MX27 + bool "i.MX27 support" + depends on ARCH_MX2 + help + This enables support for Freescale's MX2 based i.MX27 processor. + comment "MX2 Platforms" depends on ARCH_MX2 diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile index f8f8ecb..c9eac3b 100644 --- a/arch/arm/mach-mx2/Makefile +++ b/arch/arm/mach-mx2/Makefile @@ -5,3 +5,5 @@ # Object file lists. obj-y := system.o generic.o devices.o serial.o + +obj-$(CONFIG_MACH_MX27) += cpu_imx27.o diff --git a/arch/arm/mach-mx2/cpu_imx27.c b/arch/arm/mach-mx2/cpu_imx27.c new file mode 100644 index 0000000..d6b5c2e --- /dev/null +++ b/arch/arm/mach-mx2/cpu_imx27.c @@ -0,0 +1,63 @@ +/* + * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +/* + * i.MX27 specific CPU detection code + */ + +#include +#include + +#include + +#include "crm_regs.h" + +static int cpu_silicon_rev = -1; +static int cpu_partnumber; + +static void query_silicon_parameter(void) +{ + u32 val; + /* + * now we have access to the IO registers. As we need + * the silicon revision very early we read it here to + * avoid any further hooks + */ + val = __raw_readl(IO_ADDRESS(SYSCTRL_BASE_ADDR) + SYS_CHIP_ID); + + cpu_silicon_rev = (int)(val >> 28); + cpu_partnumber = (int)((val >> 12) & 0xFFFF); +} + +/* + * Returns: + * the silicon revision of the cpu + * -EINVAL - not a mx27 + */ +int mx27_revision(void) +{ + if (cpu_silicon_rev == -1) + query_silicon_parameter(); + + if (cpu_partnumber != 0x8821) + return -EINVAL; + + return cpu_silicon_rev; +} +EXPORT_SYMBOL(mx27_revision); -- cgit v1.1 From c46f5856517c2d4f438df87dac81f2295931ee93 Mon Sep 17 00:00:00 2001 From: Juergen Beisert Date: Sat, 5 Jul 2008 10:02:59 +0200 Subject: i.MX2 family: Add clock handling for i.MX27 CPU Internal clock path handling for the i.MX27 CPU. Changed against the original Freescale code (and against clocklib for example): - clock rate is always calculated whenever one ask for the current rate. (means no "rate" member in the clock structure). So switching the PLL base frequency will propagate immediately to all other clocks that are depending on this frequency. TODO: - Check if the i.MX21 CPU can share the same code. Signed-off-by: Juergen Beisert --- arch/arm/mach-mx2/Makefile | 1 + arch/arm/mach-mx2/clock_imx27.c | 1626 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 1627 insertions(+) create mode 100644 arch/arm/mach-mx2/clock_imx27.c (limited to 'arch') diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile index c9eac3b..74fb9b3 100644 --- a/arch/arm/mach-mx2/Makefile +++ b/arch/arm/mach-mx2/Makefile @@ -7,3 +7,4 @@ obj-y := system.o generic.o devices.o serial.o obj-$(CONFIG_MACH_MX27) += cpu_imx27.o +obj-$(CONFIG_MACH_MX27) += clock_imx27.o diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c new file mode 100644 index 0000000..0a29ef2 --- /dev/null +++ b/arch/arm/mach-mx2/clock_imx27.c @@ -0,0 +1,1626 @@ +/* + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "crm_regs.h" + +static struct clk ckil_clk; +static struct clk mpll_clk; +static struct clk mpll_main_clk[]; +static struct clk spll_clk; + +static int _clk_enable(struct clk *clk) +{ + unsigned long reg; + + reg = __raw_readl(clk->enable_reg); + reg |= 1 << clk->enable_shift; + __raw_writel(reg, clk->enable_reg); + + return 0; +} + +static void _clk_disable(struct clk *clk) +{ + unsigned long reg; + + reg = __raw_readl(clk->enable_reg); + reg &= ~(1 << clk->enable_shift); + __raw_writel(reg, clk->enable_reg); +} + +static int _clk_spll_enable(struct clk *clk) +{ + unsigned long reg; + + reg = __raw_readl(CCM_CSCR); + reg |= CCM_CSCR_SPEN; + __raw_writel(reg, CCM_CSCR); + + while ((__raw_readl(CCM_SPCTL1) & CCM_SPCTL1_LF) == 0) + ; + + return 0; +} + +static void _clk_spll_disable(struct clk *clk) +{ + unsigned long reg; + + reg = __raw_readl(CCM_CSCR); + reg &= ~CCM_CSCR_SPEN; + __raw_writel(reg, CCM_CSCR); +} + +static void _clk_pccr01_enable(unsigned long mask0, unsigned long mask1) +{ + unsigned long reg; + + reg = __raw_readl(CCM_PCCR0); + reg |= mask0; + __raw_writel(reg, CCM_PCCR0); + + reg = __raw_readl(CCM_PCCR1); + reg |= mask1; + __raw_writel(reg, CCM_PCCR1); + +} + +static void _clk_pccr01_disable(unsigned long mask0, unsigned long mask1) +{ + unsigned long reg; + + reg = __raw_readl(CCM_PCCR0); + reg &= ~mask0; + __raw_writel(reg, CCM_PCCR0); + + reg = __raw_readl(CCM_PCCR1); + reg &= ~mask1; + __raw_writel(reg, CCM_PCCR1); +} + +static void _clk_pccr10_enable(unsigned long mask1, unsigned long mask0) +{ + unsigned long reg; + + reg = __raw_readl(CCM_PCCR1); + reg |= mask1; + __raw_writel(reg, CCM_PCCR1); + + reg = __raw_readl(CCM_PCCR0); + reg |= mask0; + __raw_writel(reg, CCM_PCCR0); +} + +static void _clk_pccr10_disable(unsigned long mask1, unsigned long mask0) +{ + unsigned long reg; + + reg = __raw_readl(CCM_PCCR1); + reg &= ~mask1; + __raw_writel(reg, CCM_PCCR1); + + reg = __raw_readl(CCM_PCCR0); + reg &= ~mask0; + __raw_writel(reg, CCM_PCCR0); +} + +static int _clk_dma_enable(struct clk *clk) +{ + _clk_pccr01_enable(CCM_PCCR0_DMA_MASK, CCM_PCCR1_HCLK_DMA_MASK); + + return 0; +} + +static void _clk_dma_disable(struct clk *clk) +{ + _clk_pccr01_disable(CCM_PCCR0_DMA_MASK, CCM_PCCR1_HCLK_DMA_MASK); +} + +static int _clk_rtic_enable(struct clk *clk) +{ + _clk_pccr01_enable(CCM_PCCR0_RTIC_MASK, CCM_PCCR1_HCLK_RTIC_MASK); + + return 0; +} + +static void _clk_rtic_disable(struct clk *clk) +{ + _clk_pccr01_disable(CCM_PCCR0_RTIC_MASK, CCM_PCCR1_HCLK_RTIC_MASK); +} + +static int _clk_emma_enable(struct clk *clk) +{ + _clk_pccr01_enable(CCM_PCCR0_EMMA_MASK, CCM_PCCR1_HCLK_EMMA_MASK); + + return 0; +} + +static void _clk_emma_disable(struct clk *clk) +{ + _clk_pccr01_disable(CCM_PCCR0_EMMA_MASK, CCM_PCCR1_HCLK_EMMA_MASK); +} + +static int _clk_slcdc_enable(struct clk *clk) +{ + _clk_pccr01_enable(CCM_PCCR0_SLCDC_MASK, CCM_PCCR1_HCLK_SLCDC_MASK); + + return 0; +} + +static void _clk_slcdc_disable(struct clk *clk) +{ + _clk_pccr01_disable(CCM_PCCR0_SLCDC_MASK, CCM_PCCR1_HCLK_SLCDC_MASK); +} + +static int _clk_fec_enable(struct clk *clk) +{ + _clk_pccr01_enable(CCM_PCCR0_FEC_MASK, CCM_PCCR1_HCLK_FEC_MASK); + + return 0; +} + +static void _clk_fec_disable(struct clk *clk) +{ + _clk_pccr01_disable(CCM_PCCR0_FEC_MASK, CCM_PCCR1_HCLK_FEC_MASK); +} + +static int _clk_vpu_enable(struct clk *clk) +{ + unsigned long reg; + + reg = __raw_readl(CCM_PCCR1); + reg |= CCM_PCCR1_VPU_BAUD_MASK | CCM_PCCR1_HCLK_VPU_MASK; + __raw_writel(reg, CCM_PCCR1); + + return 0; +} + +static void _clk_vpu_disable(struct clk *clk) +{ + unsigned long reg; + + reg = __raw_readl(CCM_PCCR1); + reg &= ~(CCM_PCCR1_VPU_BAUD_MASK | CCM_PCCR1_HCLK_VPU_MASK); + __raw_writel(reg, CCM_PCCR1); +} + +static int _clk_sahara2_enable(struct clk *clk) +{ + _clk_pccr01_enable(CCM_PCCR0_SAHARA_MASK, CCM_PCCR1_HCLK_SAHARA_MASK); + + return 0; +} + +static void _clk_sahara2_disable(struct clk *clk) +{ + _clk_pccr01_disable(CCM_PCCR0_SAHARA_MASK, CCM_PCCR1_HCLK_SAHARA_MASK); +} + +static int _clk_mstick1_enable(struct clk *clk) +{ + _clk_pccr10_enable(CCM_PCCR1_MSHC_BAUD_MASK, CCM_PCCR0_MSHC_MASK); + + return 0; +} + +static void _clk_mstick1_disable(struct clk *clk) +{ + _clk_pccr10_disable(CCM_PCCR1_MSHC_BAUD_MASK, CCM_PCCR0_MSHC_MASK); +} + +#define CSCR() (__raw_readl(CCM_CSCR)) +#define PCDR0() (__raw_readl(CCM_PCDR0)) +#define PCDR1() (__raw_readl(CCM_PCDR1)) + +static int _clk_cpu_set_parent(struct clk *clk, struct clk *parent) +{ + int cscr = CSCR(); + + if (clk->parent == parent) + return 0; + + if (mx27_revision() >= CHIP_REV_2_0) { + if (parent == &mpll_main_clk[0]) { + cscr |= CCM_CSCR_ARM_SRC; + } else { + if (parent == &mpll_main_clk[1]) + cscr &= ~CCM_CSCR_ARM_SRC; + else + return -EINVAL; + } + __raw_writel(cscr, CCM_CSCR); + } else + return -ENODEV; + + clk->parent = parent; + return 0; +} + +static unsigned long _clk_cpu_round_rate(struct clk *clk, unsigned long rate) +{ + int div; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + div = parent_rate / rate; + if (parent_rate % rate) + div++; + + if (div > 4) + div = 4; + + return parent_rate / div; +} + +static int _clk_cpu_set_rate(struct clk *clk, unsigned long rate) +{ + unsigned int div; + uint32_t reg; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + div = parent_rate / rate; + + if (div > 4 || div < 1 || ((parent_rate / div) != rate)) + return -EINVAL; + + div--; + + reg = __raw_readl(CCM_CSCR); + if (mx27_revision() >= CHIP_REV_2_0) { + reg &= ~CCM_CSCR_ARM_MASK; + reg |= div << CCM_CSCR_ARM_OFFSET; + reg &= ~0x06; + __raw_writel(reg | 0x80000000, CCM_CSCR); + } else { + printk(KERN_ERR "Cant set CPU frequency!\n"); + } + + return 0; +} + +static unsigned long _clk_perclkx_round_rate(struct clk *clk, + unsigned long rate) +{ + u32 div; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + div = parent_rate / rate; + if (parent_rate % rate) + div++; + + if (div > 64) + div = 64; + + return parent_rate / div; +} + +static int _clk_perclkx_set_rate(struct clk *clk, unsigned long rate) +{ + u32 reg; + u32 div; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + if (clk->id < 0 || clk->id > 3) + return -EINVAL; + + div = parent_rate / rate; + if (div > 64 || div < 1 || ((parent_rate / div) != rate)) + return -EINVAL; + div--; + + reg = + __raw_readl(CCM_PCDR1) & ~(CCM_PCDR1_PERDIV1_MASK << + (clk->id << 3)); + reg |= div << (clk->id << 3); + __raw_writel(reg, CCM_PCDR1); + + return 0; +} + +static unsigned long _clk_usb_recalc(struct clk *clk) +{ + unsigned long usb_pdf; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + usb_pdf = (CSCR() & CCM_CSCR_USB_MASK) >> CCM_CSCR_USB_OFFSET; + + return parent_rate / (usb_pdf + 1U); +} + +static unsigned long _clk_ssi1_recalc(struct clk *clk) +{ + unsigned long ssi1_pdf; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + ssi1_pdf = (PCDR0() & CCM_PCDR0_SSI1BAUDDIV_MASK) >> + CCM_PCDR0_SSI1BAUDDIV_OFFSET; + + if (mx27_revision() >= CHIP_REV_2_0) + ssi1_pdf += 4; + else + ssi1_pdf = (ssi1_pdf < 2) ? 124UL : ssi1_pdf; + + return 2UL * parent_rate / ssi1_pdf; +} + +static unsigned long _clk_ssi2_recalc(struct clk *clk) +{ + unsigned long ssi2_pdf; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + ssi2_pdf = (PCDR0() & CCM_PCDR0_SSI2BAUDDIV_MASK) >> + CCM_PCDR0_SSI2BAUDDIV_OFFSET; + + if (mx27_revision() >= CHIP_REV_2_0) + ssi2_pdf += 4; + else + ssi2_pdf = (ssi2_pdf < 2) ? 124UL : ssi2_pdf; + + return 2UL * parent_rate / ssi2_pdf; +} + +static unsigned long _clk_nfc_recalc(struct clk *clk) +{ + unsigned long nfc_pdf; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + if (mx27_revision() >= CHIP_REV_2_0) { + nfc_pdf = + (PCDR0() & CCM_PCDR0_NFCDIV2_MASK) >> + CCM_PCDR0_NFCDIV2_OFFSET; + } else { + nfc_pdf = + (PCDR0() & CCM_PCDR0_NFCDIV_MASK) >> + CCM_PCDR0_NFCDIV_OFFSET; + } + + return parent_rate / (nfc_pdf + 1); +} + +static unsigned long _clk_vpu_recalc(struct clk *clk) +{ + unsigned long vpu_pdf; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + if (mx27_revision() >= CHIP_REV_2_0) { + vpu_pdf = + (PCDR0() & CCM_PCDR0_VPUDIV2_MASK) >> + CCM_PCDR0_VPUDIV2_OFFSET; + vpu_pdf += 4; + } else { + vpu_pdf = + (PCDR0() & CCM_PCDR0_VPUDIV_MASK) >> + CCM_PCDR0_VPUDIV_OFFSET; + vpu_pdf = (vpu_pdf < 2) ? 124 : vpu_pdf; + } + return 2UL * parent_rate / vpu_pdf; +} + +static unsigned long _clk_parent_round_rate(struct clk *clk, unsigned long rate) +{ + return clk->parent->round_rate(clk->parent, rate); +} + +static int _clk_parent_set_rate(struct clk *clk, unsigned long rate) +{ + return clk->parent->set_rate(clk->parent, rate); +} + +/* in Hz */ +static unsigned long external_high_reference = 26000000; + +static unsigned long get_high_reference_clock_rate(struct clk *clk) +{ + return external_high_reference; +} + +/* + * the high frequency external clock reference + * Default case is 26MHz. Could be changed at runtime + * with a call to change_external_high_reference() + */ +static struct clk ckih_clk = { + .name = "ckih", + .get_rate = get_high_reference_clock_rate, +}; + +/* in Hz */ +static unsigned long external_low_reference = 32768; + +static unsigned long get_low_reference_clock_rate(struct clk *clk) +{ + return external_low_reference; +} + +/* + * the low frequency external clock reference + * Default case is 32.768kHz Could be changed at runtime + * with a call to change_external_low_reference() + */ +static struct clk ckil_clk = { + .name = "ckil", + .get_rate = get_low_reference_clock_rate, +}; + +static unsigned long get_mpll_clk(struct clk *clk) +{ + uint32_t reg; + unsigned long ref_clk; + unsigned long mfi = 0, mfn = 0, mfd = 0, pdf = 0; + unsigned long long temp; + + ref_clk = clk_get_rate(clk->parent); + + reg = __raw_readl(CCM_MPCTL0); + pdf = (reg & CCM_MPCTL0_PD_MASK) >> CCM_MPCTL0_PD_OFFSET; + mfd = (reg & CCM_MPCTL0_MFD_MASK) >> CCM_MPCTL0_MFD_OFFSET; + mfi = (reg & CCM_MPCTL0_MFI_MASK) >> CCM_MPCTL0_MFI_OFFSET; + mfn = (reg & CCM_MPCTL0_MFN_MASK) >> CCM_MPCTL0_MFN_OFFSET; + + mfi = (mfi <= 5) ? 5 : mfi; + temp = 2LL * ref_clk * mfn; + do_div(temp, mfd + 1); + temp = 2LL * ref_clk * mfi + temp; + do_div(temp, pdf + 1); + + return (unsigned long)temp; +} + +static struct clk mpll_clk = { + .name = "mpll", + .parent = &ckih_clk, + .get_rate = get_mpll_clk, +}; + +static unsigned long _clk_mpll_main_get_rate(struct clk *clk) +{ + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + /* i.MX27 TO2: + * clk->id == 0: arm clock source path 1 which is from 2*MPLL/DIV_2 + * clk->id == 1: arm clock source path 2 which is from 2*MPLL/DIV_3 + */ + + if (mx27_revision() >= CHIP_REV_2_0 && clk->id == 1) + return 2UL * parent_rate / 3UL; + + return parent_rate; +} + +static struct clk mpll_main_clk[] = { + { + /* For i.MX27 TO2, it is the MPLL path 1 of ARM core + * It provide the clock source whose rate is same as MPLL + */ + .name = "mpll_main", + .id = 0, + .parent = &mpll_clk, + .get_rate = _clk_mpll_main_get_rate + }, { + /* For i.MX27 TO2, it is the MPLL path 2 of ARM core + * It provide the clock source whose rate is same MPLL * 2/3 + */ + .name = "mpll_main", + .id = 1, + .parent = &mpll_clk, + .get_rate = _clk_mpll_main_get_rate + } +}; + +static unsigned long get_spll_clk(struct clk *clk) +{ + uint32_t reg; + unsigned long ref_clk; + unsigned long mfi = 0, mfn = 0, mfd = 0, pdf = 0; + unsigned long long temp; + + ref_clk = clk_get_rate(clk->parent); + + reg = __raw_readl(CCM_SPCTL0); + /*TODO: This is TO2 Bug */ + if (mx27_revision() >= CHIP_REV_2_0) + __raw_writel(reg, CCM_SPCTL0); + + pdf = (reg & CCM_SPCTL0_PD_MASK) >> CCM_SPCTL0_PD_OFFSET; + mfd = (reg & CCM_SPCTL0_MFD_MASK) >> CCM_SPCTL0_MFD_OFFSET; + mfi = (reg & CCM_SPCTL0_MFI_MASK) >> CCM_SPCTL0_MFI_OFFSET; + mfn = (reg & CCM_SPCTL0_MFN_MASK) >> CCM_SPCTL0_MFN_OFFSET; + + mfi = (mfi <= 5) ? 5 : mfi; + temp = 2LL * ref_clk * mfn; + do_div(temp, mfd + 1); + temp = 2LL * ref_clk * mfi + temp; + do_div(temp, pdf + 1); + + return (unsigned long)temp; +} + +static struct clk spll_clk = { + .name = "spll", + .parent = &ckih_clk, + .get_rate = get_spll_clk, + .enable = _clk_spll_enable, + .disable = _clk_spll_disable, +}; + +static unsigned long get_cpu_clk(struct clk *clk) +{ + u32 div; + unsigned long rate; + + if (mx27_revision() >= CHIP_REV_2_0) + div = (CSCR() & CCM_CSCR_ARM_MASK) >> CCM_CSCR_ARM_OFFSET; + else + div = (CSCR() & CCM_CSCR_PRESC_MASK) >> CCM_CSCR_PRESC_OFFSET; + + rate = clk_get_rate(clk->parent); + return rate / (div + 1); +} + +static struct clk cpu_clk = { + .name = "cpu_clk", + .parent = &mpll_main_clk[1], + .set_parent = _clk_cpu_set_parent, + .round_rate = _clk_cpu_round_rate, + .get_rate = get_cpu_clk, + .set_rate = _clk_cpu_set_rate, +}; + +static unsigned long get_ahb_clk(struct clk *clk) +{ + unsigned long rate; + unsigned long bclk_pdf; + + if (mx27_revision() >= CHIP_REV_2_0) + bclk_pdf = (CSCR() & CCM_CSCR_AHB_MASK) + >> CCM_CSCR_AHB_OFFSET; + else + bclk_pdf = (CSCR() & CCM_CSCR_BCLK_MASK) + >> CCM_CSCR_BCLK_OFFSET; + + rate = clk_get_rate(clk->parent); + return rate / (bclk_pdf + 1); +} + +static struct clk ahb_clk = { + .name = "ahb_clk", + .parent = &mpll_main_clk[1], + .get_rate = get_ahb_clk, +}; + +static unsigned long get_ipg_clk(struct clk *clk) +{ + unsigned long rate; + unsigned long ipg_pdf; + + if (mx27_revision() >= CHIP_REV_2_0) + return clk_get_rate(clk->parent); + else + ipg_pdf = (CSCR() & CCM_CSCR_IPDIV) >> CCM_CSCR_IPDIV_OFFSET; + + rate = clk_get_rate(clk->parent); + return rate / (ipg_pdf + 1); +} + +static struct clk ipg_clk = { + .name = "ipg_clk", + .parent = &ahb_clk, + .get_rate = get_ipg_clk, +}; + +static unsigned long _clk_perclkx_recalc(struct clk *clk) +{ + unsigned long perclk_pdf; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + if (clk->id < 0 || clk->id > 3) + return 0; + + perclk_pdf = (PCDR1() >> (clk->id << 3)) & CCM_PCDR1_PERDIV1_MASK; + + return parent_rate / (perclk_pdf + 1); +} + +static struct clk per_clk[] = { + { + .name = "per_clk", + .id = 0, + .parent = &mpll_main_clk[1], + .get_rate = _clk_perclkx_recalc, + .enable = _clk_enable, + .enable_reg = CCM_PCCR1, + .enable_shift = CCM_PCCR1_PERCLK1_OFFSET, + .disable = _clk_disable, + }, { + .name = "per_clk", + .id = 1, + .parent = &mpll_main_clk[1], + .get_rate = _clk_perclkx_recalc, + .enable = _clk_enable, + .enable_reg = CCM_PCCR1, + .enable_shift = CCM_PCCR1_PERCLK2_OFFSET, + .disable = _clk_disable, + }, { + .name = "per_clk", + .id = 2, + .parent = &mpll_main_clk[1], + .round_rate = _clk_perclkx_round_rate, + .set_rate = _clk_perclkx_set_rate, + .get_rate = _clk_perclkx_recalc, + .enable = _clk_enable, + .enable_reg = CCM_PCCR1, + .enable_shift = CCM_PCCR1_PERCLK3_OFFSET, + .disable = _clk_disable, + }, { + .name = "per_clk", + .id = 3, + .parent = &mpll_main_clk[1], + .round_rate = _clk_perclkx_round_rate, + .set_rate = _clk_perclkx_set_rate, + .get_rate = _clk_perclkx_recalc, + .enable = _clk_enable, + .enable_reg = CCM_PCCR1, + .enable_shift = CCM_PCCR1_PERCLK4_OFFSET, + .disable = _clk_disable, + }, +}; + +struct clk uart1_clk[] = { + { + .name = "uart_clk", + .id = 0, + .parent = &per_clk[0], + .secondary = &uart1_clk[1], + }, { + .name = "uart_ipg_clk", + .id = 0, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR1, + .enable_shift = CCM_PCCR1_UART1_OFFSET, + .disable = _clk_disable, + }, +}; + +struct clk uart2_clk[] = { + { + .name = "uart_clk", + .id = 1, + .parent = &per_clk[0], + .secondary = &uart2_clk[1], + }, { + .name = "uart_ipg_clk", + .id = 1, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR1, + .enable_shift = CCM_PCCR1_UART2_OFFSET, + .disable = _clk_disable, + }, +}; + +struct clk uart3_clk[] = { + { + .name = "uart_clk", + .id = 2, + .parent = &per_clk[0], + .secondary = &uart3_clk[1], + }, { + .name = "uart_ipg_clk", + .id = 2, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR1, + .enable_shift = CCM_PCCR1_UART3_OFFSET, + .disable = _clk_disable, + }, +}; + +struct clk uart4_clk[] = { + { + .name = "uart_clk", + .id = 3, + .parent = &per_clk[0], + .secondary = &uart4_clk[1], + }, { + .name = "uart_ipg_clk", + .id = 3, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR1, + .enable_shift = CCM_PCCR1_UART4_OFFSET, + .disable = _clk_disable, + }, +}; + +struct clk uart5_clk[] = { + { + .name = "uart_clk", + .id = 4, + .parent = &per_clk[0], + .secondary = &uart5_clk[1], + }, { + .name = "uart_ipg_clk", + .id = 4, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR1, + .enable_shift = CCM_PCCR1_UART5_OFFSET, + .disable = _clk_disable, + }, +}; + +struct clk uart6_clk[] = { + { + .name = "uart_clk", + .id = 5, + .parent = &per_clk[0], + .secondary = &uart6_clk[1], + }, { + .name = "uart_ipg_clk", + .id = 5, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR1, + .enable_shift = CCM_PCCR1_UART6_OFFSET, + .disable = _clk_disable, + }, +}; + +static struct clk gpt1_clk[] = { + { + .name = "gpt_clk", + .id = 0, + .parent = &per_clk[0], + .secondary = &gpt1_clk[1], + }, { + .name = "gpt_ipg_clk", + .id = 0, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR0, + .enable_shift = CCM_PCCR0_GPT1_OFFSET, + .disable = _clk_disable, + }, +}; + +static struct clk gpt2_clk[] = { + { + .name = "gpt_clk", + .id = 1, + .parent = &per_clk[0], + .secondary = &gpt2_clk[1], + }, { + .name = "gpt_ipg_clk", + .id = 1, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR0, + .enable_shift = CCM_PCCR0_GPT2_OFFSET, + .disable = _clk_disable, + }, +}; + +static struct clk gpt3_clk[] = { + { + .name = "gpt_clk", + .id = 2, + .parent = &per_clk[0], + .secondary = &gpt3_clk[1], + }, { + .name = "gpt_ipg_clk", + .id = 2, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR0, + .enable_shift = CCM_PCCR0_GPT3_OFFSET, + .disable = _clk_disable, + }, +}; + +static struct clk gpt4_clk[] = { + { + .name = "gpt_clk", + .id = 3, + .parent = &per_clk[0], + .secondary = &gpt4_clk[1], + }, { + .name = "gpt_ipg_clk", + .id = 3, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR0, + .enable_shift = CCM_PCCR0_GPT4_OFFSET, + .disable = _clk_disable, + }, +}; + +static struct clk gpt5_clk[] = { + { + .name = "gpt_clk", + .id = 4, + .parent = &per_clk[0], + .secondary = &gpt5_clk[1], + }, { + .name = "gpt_ipg_clk", + .id = 4, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR0, + .enable_shift = CCM_PCCR0_GPT5_OFFSET, + .disable = _clk_disable, + }, +}; + +static struct clk gpt6_clk[] = { + { + .name = "gpt_clk", + .id = 5, + .parent = &per_clk[0], + .secondary = &gpt6_clk[1], + }, { + .name = "gpt_ipg_clk", + .id = 5, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR0, + .enable_shift = CCM_PCCR0_GPT6_OFFSET, + .disable = _clk_disable, + }, +}; + +static struct clk pwm_clk[] = { + { + .name = "pwm_clk", + .parent = &per_clk[0], + .secondary = &pwm_clk[1], + }, { + .name = "pwm_clk", + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR0, + .enable_shift = CCM_PCCR0_PWM_OFFSET, + .disable = _clk_disable, + }, +}; + +static struct clk sdhc1_clk[] = { + { + .name = "sdhc_clk", + .id = 0, + .parent = &per_clk[1], + .secondary = &sdhc1_clk[1], + }, { + .name = "sdhc_ipg_clk", + .id = 0, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR0, + .enable_shift = CCM_PCCR0_SDHC1_OFFSET, + .disable = _clk_disable, + }, +}; + +static struct clk sdhc2_clk[] = { + { + .name = "sdhc_clk", + .id = 1, + .parent = &per_clk[1], + .secondary = &sdhc2_clk[1], + }, { + .name = "sdhc_ipg_clk", + .id = 1, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR0, + .enable_shift = CCM_PCCR0_SDHC2_OFFSET, + .disable = _clk_disable, + }, +}; + +static struct clk sdhc3_clk[] = { + { + .name = "sdhc_clk", + .id = 2, + .parent = &per_clk[1], + .secondary = &sdhc3_clk[1], + }, { + .name = "sdhc_ipg_clk", + .id = 2, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR0, + .enable_shift = CCM_PCCR0_SDHC3_OFFSET, + .disable = _clk_disable, + }, +}; + +static struct clk cspi1_clk[] = { + { + .name = "cspi_clk", + .id = 0, + .parent = &per_clk[1], + .secondary = &cspi1_clk[1], + }, { + .name = "cspi_ipg_clk", + .id = 0, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR0, + .enable_shift = CCM_PCCR0_CSPI1_OFFSET, + .disable = _clk_disable, + }, +}; + +static struct clk cspi2_clk[] = { + { + .name = "cspi_clk", + .id = 1, + .parent = &per_clk[1], + .secondary = &cspi2_clk[1], + }, { + .name = "cspi_ipg_clk", + .id = 1, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR0, + .enable_shift = CCM_PCCR0_CSPI2_OFFSET, + .disable = _clk_disable, + }, +}; + +static struct clk cspi3_clk[] = { + { + .name = "cspi_clk", + .id = 2, + .parent = &per_clk[1], + .secondary = &cspi3_clk[1], + }, { + .name = "cspi_ipg_clk", + .id = 2, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR0, + .enable_shift = CCM_PCCR0_CSPI3_OFFSET, + .disable = _clk_disable, + }, +}; + +static struct clk lcdc_clk[] = { + { + .name = "lcdc_clk", + .parent = &per_clk[2], + .secondary = &lcdc_clk[1], + .round_rate = _clk_parent_round_rate, + .set_rate = _clk_parent_set_rate, + }, { + .name = "lcdc_ipg_clk", + .parent = &ipg_clk, + .secondary = &lcdc_clk[2], + .enable = _clk_enable, + .enable_reg = CCM_PCCR0, + .enable_shift = CCM_PCCR0_LCDC_OFFSET, + .disable = _clk_disable, + }, { + .name = "lcdc_ahb_clk", + .parent = &ahb_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR1, + .enable_shift = CCM_PCCR1_HCLK_LCDC_OFFSET, + .disable = _clk_disable, + }, +}; + +static struct clk csi_clk[] = { + { + .name = "csi_perclk", + .parent = &per_clk[3], + .secondary = &csi_clk[1], + .round_rate = _clk_parent_round_rate, + .set_rate = _clk_parent_set_rate, + }, { + .name = "csi_ahb_clk", + .parent = &ahb_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR1, + .enable_shift = CCM_PCCR1_HCLK_CSI_OFFSET, + .disable = _clk_disable, + }, +}; + +static struct clk usb_clk[] = { + { + .name = "usb_clk", + .parent = &spll_clk, + .get_rate = _clk_usb_recalc, + .enable = _clk_enable, + .enable_reg = CCM_PCCR1, + .enable_shift = CCM_PCCR1_USBOTG_OFFSET, + .disable = _clk_disable, + }, { + .name = "usb_ahb_clk", + .parent = &ahb_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR1, + .enable_shift = CCM_PCCR1_HCLK_USBOTG_OFFSET, + .disable = _clk_disable, + } +}; + +static struct clk ssi1_clk[] = { + { + .name = "ssi_clk", + .id = 0, + .parent = &mpll_main_clk[1], + .secondary = &ssi1_clk[1], + .get_rate = _clk_ssi1_recalc, + .enable = _clk_enable, + .enable_reg = CCM_PCCR1, + .enable_shift = CCM_PCCR1_SSI1_BAUD_OFFSET, + .disable = _clk_disable, + }, { + .name = "ssi_ipg_clk", + .id = 0, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR0, + .enable_shift = CCM_PCCR0_SSI1_IPG_OFFSET, + .disable = _clk_disable, + }, +}; + +static struct clk ssi2_clk[] = { + { + .name = "ssi_clk", + .id = 1, + .parent = &mpll_main_clk[1], + .secondary = &ssi2_clk[1], + .get_rate = _clk_ssi2_recalc, + .enable = _clk_enable, + .enable_reg = CCM_PCCR1, + .enable_shift = CCM_PCCR1_SSI2_BAUD_OFFSET, + .disable = _clk_disable, + }, { + .name = "ssi_ipg_clk", + .id = 1, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR0, + .enable_shift = CCM_PCCR0_SSI2_IPG_OFFSET, + .disable = _clk_disable, + }, +}; + +static struct clk nfc_clk = { + .name = "nfc_clk", + .parent = &cpu_clk, + .get_rate = _clk_nfc_recalc, + .enable = _clk_enable, + .enable_reg = CCM_PCCR1, + .enable_shift = CCM_PCCR1_NFC_BAUD_OFFSET, + .disable = _clk_disable, +}; + +static struct clk vpu_clk = { + .name = "vpu_clk", + .parent = &mpll_main_clk[1], + .get_rate = _clk_vpu_recalc, + .enable = _clk_vpu_enable, + .disable = _clk_vpu_disable, +}; + +static struct clk dma_clk = { + .name = "dma_clk", + .parent = &ahb_clk, + .enable = _clk_dma_enable, + .disable = _clk_dma_disable, +}; + +static struct clk rtic_clk = { + .name = "rtic_clk", + .parent = &ahb_clk, + .enable = _clk_rtic_enable, + .disable = _clk_rtic_disable, +}; + +static struct clk brom_clk = { + .name = "brom_clk", + .parent = &ahb_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR1, + .enable_shift = CCM_PCCR1_HCLK_BROM_OFFSET, + .disable = _clk_disable, +}; + +static struct clk emma_clk = { + .name = "emma_clk", + .parent = &ahb_clk, + .enable = _clk_emma_enable, + .disable = _clk_emma_disable, +}; + +static struct clk slcdc_clk = { + .name = "slcdc_clk", + .parent = &ahb_clk, + .enable = _clk_slcdc_enable, + .disable = _clk_slcdc_disable, +}; + +static struct clk fec_clk = { + .name = "fec_clk", + .parent = &ahb_clk, + .enable = _clk_fec_enable, + .disable = _clk_fec_disable, +}; + +static struct clk emi_clk = { + .name = "emi_clk", + .parent = &ahb_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR1, + .enable_shift = CCM_PCCR1_HCLK_EMI_OFFSET, + .disable = _clk_disable, +}; + +static struct clk sahara2_clk = { + .name = "sahara_clk", + .parent = &ahb_clk, + .enable = _clk_sahara2_enable, + .disable = _clk_sahara2_disable, +}; + +static struct clk ata_clk = { + .name = "ata_clk", + .parent = &ahb_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR1, + .enable_shift = CCM_PCCR1_HCLK_ATA_OFFSET, + .disable = _clk_disable, +}; + +static struct clk mstick1_clk = { + .name = "mstick1_clk", + .parent = &ipg_clk, + .enable = _clk_mstick1_enable, + .disable = _clk_mstick1_disable, +}; + +static struct clk wdog_clk = { + .name = "wdog_clk", + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR1, + .enable_shift = CCM_PCCR1_WDT_OFFSET, + .disable = _clk_disable, +}; + +static struct clk gpio_clk = { + .name = "gpio_clk", + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR1, + .enable_shift = CCM_PCCR0_GPIO_OFFSET, + .disable = _clk_disable, +}; + +static struct clk i2c_clk[] = { + { + .name = "i2c_clk", + .id = 0, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR0, + .enable_shift = CCM_PCCR0_I2C1_OFFSET, + .disable = _clk_disable, + }, { + .name = "i2c_clk", + .id = 1, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR0, + .enable_shift = CCM_PCCR0_I2C2_OFFSET, + .disable = _clk_disable, + }, +}; + +static struct clk iim_clk = { + .name = "iim_clk", + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR0, + .enable_shift = CCM_PCCR0_IIM_OFFSET, + .disable = _clk_disable, +}; + +static struct clk kpp_clk = { + .name = "kpp_clk", + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR0, + .enable_shift = CCM_PCCR0_KPP_OFFSET, + .disable = _clk_disable, +}; + +static struct clk owire_clk = { + .name = "owire_clk", + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR0, + .enable_shift = CCM_PCCR0_OWIRE_OFFSET, + .disable = _clk_disable, +}; + +static struct clk rtc_clk = { + .name = "rtc_clk", + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR0, + .enable_shift = CCM_PCCR0_RTC_OFFSET, + .disable = _clk_disable, +}; + +static struct clk scc_clk = { + .name = "scc_clk", + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR0, + .enable_shift = CCM_PCCR0_SCC_OFFSET, + .disable = _clk_disable, +}; + +static unsigned long _clk_clko_round_rate(struct clk *clk, unsigned long rate) +{ + u32 div; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + div = parent_rate / rate; + if (parent_rate % rate) + div++; + + if (div > 8) + div = 8; + + return parent_rate / div; +} + +static int _clk_clko_set_rate(struct clk *clk, unsigned long rate) +{ + u32 reg; + u32 div; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + div = parent_rate / rate; + + if (div > 8 || div < 1 || ((parent_rate / div) != rate)) + return -EINVAL; + div--; + + reg = __raw_readl(CCM_PCDR0) & ~CCM_PCDR0_CLKODIV_MASK; + reg |= div << CCM_PCDR0_CLKODIV_OFFSET; + __raw_writel(reg, CCM_PCDR0); + + return 0; +} + +static unsigned long _clk_clko_recalc(struct clk *clk) +{ + u32 div; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + div = __raw_readl(CCM_PCDR0) & CCM_PCDR0_CLKODIV_MASK >> + CCM_PCDR0_CLKODIV_OFFSET; + div++; + + return parent_rate / div; +} + +static int _clk_clko_set_parent(struct clk *clk, struct clk *parent) +{ + u32 reg; + + reg = __raw_readl(CCM_CCSR) & ~CCM_CCSR_CLKOSEL_MASK; + + if (parent == &ckil_clk) + reg |= 0 << CCM_CCSR_CLKOSEL_OFFSET; + else if (parent == &ckih_clk) + reg |= 2 << CCM_CCSR_CLKOSEL_OFFSET; + else if (parent == mpll_clk.parent) + reg |= 3 << CCM_CCSR_CLKOSEL_OFFSET; + else if (parent == spll_clk.parent) + reg |= 4 << CCM_CCSR_CLKOSEL_OFFSET; + else if (parent == &mpll_clk) + reg |= 5 << CCM_CCSR_CLKOSEL_OFFSET; + else if (parent == &spll_clk) + reg |= 6 << CCM_CCSR_CLKOSEL_OFFSET; + else if (parent == &cpu_clk) + reg |= 7 << CCM_CCSR_CLKOSEL_OFFSET; + else if (parent == &ahb_clk) + reg |= 8 << CCM_CCSR_CLKOSEL_OFFSET; + else if (parent == &ipg_clk) + reg |= 9 << CCM_CCSR_CLKOSEL_OFFSET; + else if (parent == &per_clk[0]) + reg |= 0xA << CCM_CCSR_CLKOSEL_OFFSET; + else if (parent == &per_clk[1]) + reg |= 0xB << CCM_CCSR_CLKOSEL_OFFSET; + else if (parent == &per_clk[2]) + reg |= 0xC << CCM_CCSR_CLKOSEL_OFFSET; + else if (parent == &per_clk[3]) + reg |= 0xD << CCM_CCSR_CLKOSEL_OFFSET; + else if (parent == &ssi1_clk[0]) + reg |= 0xE << CCM_CCSR_CLKOSEL_OFFSET; + else if (parent == &ssi2_clk[0]) + reg |= 0xF << CCM_CCSR_CLKOSEL_OFFSET; + else if (parent == &nfc_clk) + reg |= 0x10 << CCM_CCSR_CLKOSEL_OFFSET; + else if (parent == &mstick1_clk) + reg |= 0x11 << CCM_CCSR_CLKOSEL_OFFSET; + else if (parent == &vpu_clk) + reg |= 0x12 << CCM_CCSR_CLKOSEL_OFFSET; + else if (parent == &usb_clk[0]) + reg |= 0x15 << CCM_CCSR_CLKOSEL_OFFSET; + else + return -EINVAL; + + __raw_writel(reg, CCM_CCSR); + + return 0; +} + +static int _clk_clko_enable(struct clk *clk) +{ + u32 reg; + + reg = __raw_readl(CCM_PCDR0) | CCM_PCDR0_CLKO_EN; + __raw_writel(reg, CCM_PCDR0); + + return 0; +} + +static void _clk_clko_disable(struct clk *clk) +{ + u32 reg; + + reg = __raw_readl(CCM_PCDR0) & ~CCM_PCDR0_CLKO_EN; + __raw_writel(reg, CCM_PCDR0); +} + +static struct clk clko_clk = { + .name = "clko_clk", + .get_rate = _clk_clko_recalc, + .set_rate = _clk_clko_set_rate, + .round_rate = _clk_clko_round_rate, + .set_parent = _clk_clko_set_parent, + .enable = _clk_clko_enable, + .disable = _clk_clko_disable, +}; + +static struct clk *mxc_clks[] = { + &ckih_clk, + &ckil_clk, + &mpll_clk, + &mpll_main_clk[0], + &mpll_main_clk[1], + &spll_clk, + &cpu_clk, + &ahb_clk, + &ipg_clk, + &per_clk[0], + &per_clk[1], + &per_clk[2], + &per_clk[3], + &clko_clk, + &uart1_clk[0], + &uart1_clk[1], + &uart2_clk[0], + &uart2_clk[1], + &uart3_clk[0], + &uart3_clk[1], + &uart4_clk[0], + &uart4_clk[1], + &uart5_clk[0], + &uart5_clk[1], + &uart6_clk[0], + &uart6_clk[1], + &gpt1_clk[0], + &gpt1_clk[1], + &gpt2_clk[0], + &gpt2_clk[1], + &gpt3_clk[0], + &gpt3_clk[1], + &gpt4_clk[0], + &gpt4_clk[1], + &gpt5_clk[0], + &gpt5_clk[1], + &gpt6_clk[0], + &gpt6_clk[1], + &pwm_clk[0], + &pwm_clk[1], + &sdhc1_clk[0], + &sdhc1_clk[1], + &sdhc2_clk[0], + &sdhc2_clk[1], + &sdhc3_clk[0], + &sdhc3_clk[1], + &cspi1_clk[0], + &cspi1_clk[1], + &cspi2_clk[0], + &cspi2_clk[1], + &cspi3_clk[0], + &cspi3_clk[1], + &lcdc_clk[0], + &lcdc_clk[1], + &lcdc_clk[2], + &csi_clk[0], + &csi_clk[1], + &usb_clk[0], + &usb_clk[1], + &ssi1_clk[0], + &ssi1_clk[1], + &ssi2_clk[0], + &ssi2_clk[1], + &nfc_clk, + &vpu_clk, + &dma_clk, + &rtic_clk, + &brom_clk, + &emma_clk, + &slcdc_clk, + &fec_clk, + &emi_clk, + &sahara2_clk, + &ata_clk, + &mstick1_clk, + &wdog_clk, + &gpio_clk, + &i2c_clk[0], + &i2c_clk[1], + &iim_clk, + &kpp_clk, + &owire_clk, + &rtc_clk, + &scc_clk, +}; + +void __init change_external_low_reference(unsigned long new_ref) +{ + external_low_reference = new_ref; +} + +unsigned long __init clk_early_get_timer_rate(void) +{ + return clk_get_rate(&per_clk[0]); +} + +static void __init probe_mxc_clocks(void) +{ + int i; + + if (mx27_revision() >= CHIP_REV_2_0) { + if (CSCR() & 0x8000) + cpu_clk.parent = &mpll_main_clk[0]; + + if (!(CSCR() & 0x00800000)) + ssi2_clk[0].parent = &spll_clk; + + if (!(CSCR() & 0x00400000)) + ssi1_clk[0].parent = &spll_clk; + + if (!(CSCR() & 0x00200000)) + vpu_clk.parent = &spll_clk; + } else { + cpu_clk.parent = &mpll_clk; + cpu_clk.set_parent = NULL; + cpu_clk.round_rate = NULL; + cpu_clk.set_rate = NULL; + ahb_clk.parent = &mpll_clk; + + for (i = 0; i < sizeof(per_clk) / sizeof(per_clk[0]); i++) + per_clk[i].parent = &mpll_clk; + + ssi1_clk[0].parent = &mpll_clk; + ssi2_clk[0].parent = &mpll_clk; + + vpu_clk.parent = &mpll_clk; + } +} + +/* + * must be called very early to get information about the + * available clock rate when the timer framework starts + */ +int __init mxc_clocks_init(unsigned long fref) +{ + u32 cscr; + struct clk **clkp; + + external_high_reference = fref; + + /* detect clock reference for both system PLL */ + cscr = CSCR(); + if (cscr & CCM_CSCR_MCU) + mpll_clk.parent = &ckih_clk; + else + mpll_clk.parent = &ckil_clk; + + if (cscr & CCM_CSCR_SP) + spll_clk.parent = &ckih_clk; + else + spll_clk.parent = &ckil_clk; + + probe_mxc_clocks(); + + per_clk[0].enable(&per_clk[0]); + gpt1_clk[1].enable(&gpt1_clk[1]); + + for (clkp = mxc_clks; clkp < mxc_clks + ARRAY_SIZE(mxc_clks); clkp++) + clk_register(*clkp); + + /* Turn off all possible clocks */ + __raw_writel(CCM_PCCR0_GPT1_MASK, CCM_PCCR0); + __raw_writel(CCM_PCCR1_PERCLK1_MASK | CCM_PCCR1_HCLK_EMI_MASK, + CCM_PCCR1); + spll_clk.disable(&spll_clk); + + /* This will propagate to all children and init all the clock rates */ + + clk_enable(&emi_clk); + clk_enable(&gpio_clk); + clk_enable(&iim_clk); + clk_enable(&gpt1_clk[0]); +#ifdef CONFIG_DEBUG_LL_CONSOLE + clk_enable(&uart1_clk[0]); +#endif + return 0; +} -- cgit v1.1 From 80eedae6f0322dafc749140b67986b2472473745 Mon Sep 17 00:00:00 2001 From: Juergen Beisert Date: Sat, 5 Jul 2008 10:03:00 +0200 Subject: i.MX27: Add ADS platform support This patch adds basic support for the Freescale MX27ADS reference board. Currently only a serial console can be used. Signed-off-by: Juergen Beisert --- arch/arm/configs/imx27ads_defconfig | 826 ++++++++++++++++++++++++++++++++++++ arch/arm/mach-mx2/Kconfig | 7 + arch/arm/mach-mx2/Makefile | 2 + arch/arm/mach-mx2/mx27ads.c | 304 +++++++++++++ 4 files changed, 1139 insertions(+) create mode 100644 arch/arm/configs/imx27ads_defconfig create mode 100644 arch/arm/mach-mx2/mx27ads.c (limited to 'arch') diff --git a/arch/arm/configs/imx27ads_defconfig b/arch/arm/configs/imx27ads_defconfig new file mode 100644 index 0000000..bcd95b8 --- /dev/null +++ b/arch/arm/configs/imx27ads_defconfig @@ -0,0 +1,826 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.26-rc6 +# Fri Jun 20 16:29:34 2008 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_ZONE_DMA=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +CONFIG_CLASSIC_RCU=y + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +CONFIG_ARCH_MXC=y +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM7X00A is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Freescale MXC Implementations +# +CONFIG_ARCH_MX2=y +# CONFIG_ARCH_MX3 is not set + +# +# MX2 family CPU support +# +CONFIG_MACH_MX27=y + +# +# MX2 Platforms +# +CONFIG_MACH_MX27ADS=y +# CONFIG_MACH_PCM038 is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +CONFIG_MTD_MAP_BANK_WIDTH_2=y +# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +# CONFIG_MTD_CFI_I2 is not set +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_XIP is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x00000000 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_FEC_OLD is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_IMX is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +CONFIG_HAVE_GPIO_LIB=y + +# +# GPIO Support +# + +# +# I2C GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_UIO is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +CONFIG_NLS_CODEPAGE_850=m +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +CONFIG_NLS_ISO8859_15=m +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_FRAME_POINTER=y +# CONFIG_SAMPLES is not set +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_GENERIC_FIND_NEXT_BIT is not set +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig index 6e7d724..6f98355 100644 --- a/arch/arm/mach-mx2/Kconfig +++ b/arch/arm/mach-mx2/Kconfig @@ -9,3 +9,10 @@ config MACH_MX27 comment "MX2 Platforms" depends on ARCH_MX2 + +config MACH_MX27ADS + bool "MX27ADS platform" + depends on MACH_MX27 + help + Include support for MX27ADS platform. This includes specific + configurations for the board and its peripherals. diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile index 74fb9b3..f6764eb 100644 --- a/arch/arm/mach-mx2/Makefile +++ b/arch/arm/mach-mx2/Makefile @@ -8,3 +8,5 @@ obj-y := system.o generic.o devices.o serial.o obj-$(CONFIG_MACH_MX27) += cpu_imx27.o obj-$(CONFIG_MACH_MX27) += clock_imx27.o + +obj-$(CONFIG_MACH_MX27ADS) += mx27ads.o diff --git a/arch/arm/mach-mx2/mx27ads.c b/arch/arm/mach-mx2/mx27ads.c new file mode 100644 index 0000000..a9ff01f --- /dev/null +++ b/arch/arm/mach-mx2/mx27ads.c @@ -0,0 +1,304 @@ +/* + * Copyright (C) 2000 Deep Blue Solutions Ltd + * Copyright (C) 2002 Shane Nay (shane@minirl.com) + * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* ADS's NOR flash */ +static struct physmap_flash_data mx27ads_flash_data = { + .width = 2, +}; + +static struct resource mx27ads_flash_resource = { + .start = 0xc0000000, + .end = 0xc0000000 + 0x02000000 - 1, + .flags = IORESOURCE_MEM, + +}; + +static struct platform_device mx27ads_nor_mtd_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &mx27ads_flash_data, + }, + .num_resources = 1, + .resource = &mx27ads_flash_resource, +}; + +static int mxc_uart0_pins[] = { + PE12_PF_UART1_TXD, + PE13_PF_UART1_RXD, + PE14_PF_UART1_CTS, + PE15_PF_UART1_RTS +}; + +static int uart_mxc_port0_init(struct platform_device *pdev) +{ + return mxc_gpio_setup_multiple_pins(mxc_uart0_pins, + ARRAY_SIZE(mxc_uart0_pins), + MXC_GPIO_ALLOC_MODE_NORMAL, "UART0"); +} + +static int uart_mxc_port0_exit(struct platform_device *pdev) +{ + return mxc_gpio_setup_multiple_pins(mxc_uart0_pins, + ARRAY_SIZE(mxc_uart0_pins), + MXC_GPIO_ALLOC_MODE_RELEASE, "UART0"); +} + +static int mxc_uart1_pins[] = { + PE3_PF_UART2_CTS, + PE4_PF_UART2_RTS, + PE6_PF_UART2_TXD, + PE7_PF_UART2_RXD +}; + +static int uart_mxc_port1_init(struct platform_device *pdev) +{ + return mxc_gpio_setup_multiple_pins(mxc_uart1_pins, + ARRAY_SIZE(mxc_uart1_pins), + MXC_GPIO_ALLOC_MODE_NORMAL, "UART1"); +} + +static int uart_mxc_port1_exit(struct platform_device *pdev) +{ + return mxc_gpio_setup_multiple_pins(mxc_uart1_pins, + ARRAY_SIZE(mxc_uart1_pins), + MXC_GPIO_ALLOC_MODE_RELEASE, "UART1"); +} + +static int mxc_uart2_pins[] = { + PE8_PF_UART3_TXD, + PE9_PF_UART3_RXD, + PE10_PF_UART3_CTS, + PE11_PF_UART3_RTS +}; + +static int uart_mxc_port2_init(struct platform_device *pdev) +{ + return mxc_gpio_setup_multiple_pins(mxc_uart2_pins, + ARRAY_SIZE(mxc_uart2_pins), + MXC_GPIO_ALLOC_MODE_NORMAL, "UART2"); +} + +static int uart_mxc_port2_exit(struct platform_device *pdev) +{ + return mxc_gpio_setup_multiple_pins(mxc_uart2_pins, + ARRAY_SIZE(mxc_uart2_pins), + MXC_GPIO_ALLOC_MODE_RELEASE, "UART2"); +} + +static int mxc_uart3_pins[] = { + PB26_AF_UART4_RTS, + PB28_AF_UART4_TXD, + PB29_AF_UART4_CTS, + PB31_AF_UART4_RXD +}; + +static int uart_mxc_port3_init(struct platform_device *pdev) +{ + return mxc_gpio_setup_multiple_pins(mxc_uart3_pins, + ARRAY_SIZE(mxc_uart3_pins), + MXC_GPIO_ALLOC_MODE_NORMAL, "UART3"); +} + +static int uart_mxc_port3_exit(struct platform_device *pdev) +{ + return mxc_gpio_setup_multiple_pins(mxc_uart3_pins, + ARRAY_SIZE(mxc_uart3_pins), + MXC_GPIO_ALLOC_MODE_RELEASE, "UART3"); +} + +static int mxc_uart4_pins[] = { + PB18_AF_UART5_TXD, + PB19_AF_UART5_RXD, + PB20_AF_UART5_CTS, + PB21_AF_UART5_RTS +}; + +static int uart_mxc_port4_init(struct platform_device *pdev) +{ + return mxc_gpio_setup_multiple_pins(mxc_uart4_pins, + ARRAY_SIZE(mxc_uart4_pins), + MXC_GPIO_ALLOC_MODE_NORMAL, "UART4"); +} + +static int uart_mxc_port4_exit(struct platform_device *pdev) +{ + return mxc_gpio_setup_multiple_pins(mxc_uart4_pins, + ARRAY_SIZE(mxc_uart4_pins), + MXC_GPIO_ALLOC_MODE_RELEASE, "UART4"); +} + +static int mxc_uart5_pins[] = { + PB10_AF_UART6_TXD, + PB12_AF_UART6_CTS, + PB11_AF_UART6_RXD, + PB13_AF_UART6_RTS +}; + +static int uart_mxc_port5_init(struct platform_device *pdev) +{ + return mxc_gpio_setup_multiple_pins(mxc_uart5_pins, + ARRAY_SIZE(mxc_uart5_pins), + MXC_GPIO_ALLOC_MODE_NORMAL, "UART5"); +} + +static int uart_mxc_port5_exit(struct platform_device *pdev) +{ + return mxc_gpio_setup_multiple_pins(mxc_uart5_pins, + ARRAY_SIZE(mxc_uart5_pins), + MXC_GPIO_ALLOC_MODE_RELEASE, "UART5"); +} + +static struct platform_device *platform_devices[] __initdata = { + &mx27ads_nor_mtd_device, +}; + +static int mxc_fec_pins[] = { + PD0_AIN_FEC_TXD0, + PD1_AIN_FEC_TXD1, + PD2_AIN_FEC_TXD2, + PD3_AIN_FEC_TXD3, + PD4_AOUT_FEC_RX_ER, + PD5_AOUT_FEC_RXD1, + PD6_AOUT_FEC_RXD2, + PD7_AOUT_FEC_RXD3, + PD8_AF_FEC_MDIO, + PD9_AIN_FEC_MDC, + PD10_AOUT_FEC_CRS, + PD11_AOUT_FEC_TX_CLK, + PD12_AOUT_FEC_RXD0, + PD13_AOUT_FEC_RX_DV, + PD14_AOUT_FEC_CLR, + PD15_AOUT_FEC_COL, + PD16_AIN_FEC_TX_ER, + PF23_AIN_FEC_TX_EN +}; + +static void gpio_fec_active(void) +{ + mxc_gpio_setup_multiple_pins(mxc_fec_pins, + ARRAY_SIZE(mxc_fec_pins), + MXC_GPIO_ALLOC_MODE_NORMAL, "FEC"); +} + +static void gpio_fec_inactive(void) +{ + mxc_gpio_setup_multiple_pins(mxc_fec_pins, + ARRAY_SIZE(mxc_fec_pins), + MXC_GPIO_ALLOC_MODE_RELEASE, "FEC"); +} + +static struct imxuart_platform_data uart_pdata[] = { + { + .init = uart_mxc_port0_init, + .exit = uart_mxc_port0_exit, + .flags = IMXUART_HAVE_RTSCTS, + }, { + .init = uart_mxc_port1_init, + .exit = uart_mxc_port1_exit, + .flags = IMXUART_HAVE_RTSCTS, + }, { + .init = uart_mxc_port2_init, + .exit = uart_mxc_port2_exit, + .flags = IMXUART_HAVE_RTSCTS, + }, { + .init = uart_mxc_port3_init, + .exit = uart_mxc_port3_exit, + .flags = IMXUART_HAVE_RTSCTS, + }, { + .init = uart_mxc_port4_init, + .exit = uart_mxc_port4_exit, + .flags = IMXUART_HAVE_RTSCTS, + }, { + .init = uart_mxc_port5_init, + .exit = uart_mxc_port5_exit, + .flags = IMXUART_HAVE_RTSCTS, + }, +}; + +static void __init mx27ads_board_init(void) +{ + int i; + + gpio_fec_active(); + + for (i = 0; i < 6; i++) + imx_init_uart(i, &uart_pdata[i]); + + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); +} + +static void __init mx27ads_timer_init(void) +{ + unsigned long fref = 26000000; + + if ((__raw_readw(PBC_VERSION_REG) & CKIH_27MHZ_BIT_SET) == 0) + fref = 27000000; + + mxc_clocks_init(fref); + mxc_timer_init("gpt_clk.0"); +} + +struct sys_timer mx27ads_timer = { + .init = mx27ads_timer_init, +}; + +static struct map_desc mx27ads_io_desc[] __initdata = { + { + .virtual = PBC_BASE_ADDRESS, + .pfn = __phys_to_pfn(CS4_BASE_ADDR), + .length = SZ_1M, + .type = MT_DEVICE, + }, +}; + +void __init mx27ads_map_io(void) +{ + mxc_map_io(); + iotable_init(mx27ads_io_desc, ARRAY_SIZE(mx27ads_io_desc)); +} + +MACHINE_START(MX27ADS, "Freescale i.MX27ADS") + /* maintainer: Freescale Semiconductor, Inc. */ + .phys_io = AIPI_BASE_ADDR, + .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = PHYS_OFFSET + 0x100, + .map_io = mx27ads_map_io, + .init_irq = mxc_init_irq, + .init_machine = mx27ads_board_init, + .timer = &mx27ads_timer, +MACHINE_END + -- cgit v1.1 From 7e5e9f5457f5cd019fd7e2f3da94e9fc72cc9ff6 Mon Sep 17 00:00:00 2001 From: Juergen Beisert Date: Sat, 5 Jul 2008 10:03:00 +0200 Subject: i.MX27: Adding PCM038 platform support This patch adds support for the phyCORE-i.MX27 cpu module (aka pcm038). It is as generic as possible in order to support any kind of baseboard. Note: This CPU module implementation can't work without a baseboard support. Baseboard support can be added by the PCM-970 (included in this patch stack) or any custom variant. Signed-off-by: Juergen Beisert --- arch/arm/configs/pcm038_defconfig | 1008 +++++++++++++++++++++++++++++++++++++ arch/arm/mach-mx2/Kconfig | 7 + arch/arm/mach-mx2/Makefile | 1 + arch/arm/mach-mx2/pcm038.c | 200 ++++++++ 4 files changed, 1216 insertions(+) create mode 100644 arch/arm/configs/pcm038_defconfig create mode 100644 arch/arm/mach-mx2/pcm038.c (limited to 'arch') diff --git a/arch/arm/configs/pcm038_defconfig b/arch/arm/configs/pcm038_defconfig new file mode 100644 index 0000000..6b798c2 --- /dev/null +++ b/arch/arm/configs/pcm038_defconfig @@ -0,0 +1,1008 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.26-rc6 +# Fri Jun 20 16:38:36 2008 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_ZONE_DMA=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_RT_GROUP_SCHED=y +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +# CONFIG_COMPAT_BRK is not set +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_PROFILING=y +CONFIG_MARKERS=y +CONFIG_OPROFILE=y +CONFIG_HAVE_OPROFILE=y +CONFIG_KPROBES=y +CONFIG_KRETPROBES=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_PROC_PAGE_MONITOR is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +CONFIG_CLASSIC_RCU=y + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +CONFIG_ARCH_MXC=y +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM7X00A is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Freescale MXC Implementations +# +CONFIG_ARCH_MX2=y +# CONFIG_ARCH_MX3 is not set + +# +# MX2 family CPU support +# +CONFIG_MACH_MX27=y + +# +# MX2 Platforms +# +# CONFIG_MACH_MX27ADS is not set +CONFIG_MACH_PCM038=y +CONFIG_MACH_PCM970_BASEBOARD=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NET_TCPPROBE is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +CONFIG_MTD_MAP_BANK_WIDTH_2=y +# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +# CONFIG_MTD_CFI_I2 is not set +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_XIP is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x00000000 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +CONFIG_FEC_OLD=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_IMX=y +CONFIG_SERIAL_IMX_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_CHARDEV is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_PCA_PLATFORM is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_TPS65010 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BITBANG=y + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +CONFIG_HAVE_GPIO_LIB=y + +# +# GPIO Support +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +CONFIG_VIDEO_DEV=y +CONFIG_VIDEO_V4L2_COMMON=y +CONFIG_VIDEO_ALLOW_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +# CONFIG_DVB_CORE is not set +CONFIG_VIDEO_MEDIA=y + +# +# Multimedia drivers +# +# CONFIG_MEDIA_ATTACH is not set +CONFIG_MEDIA_TUNER=y +# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set +CONFIG_MEDIA_TUNER_SIMPLE=y +CONFIG_MEDIA_TUNER_TDA8290=y +CONFIG_MEDIA_TUNER_TDA9887=y +CONFIG_MEDIA_TUNER_TEA5761=y +CONFIG_MEDIA_TUNER_TEA5767=y +CONFIG_MEDIA_TUNER_MT20XX=y +CONFIG_MEDIA_TUNER_XC2028=y +CONFIG_MEDIA_TUNER_XC5000=y +CONFIG_VIDEO_V4L2=y +CONFIG_VIDEO_V4L1=y +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_TUNER_3036 is not set +# CONFIG_SOC_CAMERA is not set +# CONFIG_RADIO_ADAPTERS is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +# CONFIG_FONT_8x16 is not set +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +# CONFIG_LOGO is not set + +# +# Sound +# +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +CONFIG_RTC_DRV_PCF8563=y +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_UIO is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +CONFIG_NLS_CODEPAGE_850=m +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +CONFIG_NLS_ISO8859_15=m +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_FRAME_POINTER=y +# CONFIG_SAMPLES is not set +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_GENERIC_FIND_NEXT_BIT is not set +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig index 6f98355..4c19e1c 100644 --- a/arch/arm/mach-mx2/Kconfig +++ b/arch/arm/mach-mx2/Kconfig @@ -16,3 +16,10 @@ config MACH_MX27ADS help Include support for MX27ADS platform. This includes specific configurations for the board and its peripherals. + +config MACH_PCM038 + bool "Phytec phyCORE-i.MX27 CPU module (pcm038)" + depends on MACH_MX27 + help + Include support for phyCORE-i.MX27 (aka pcm038) platform. This + includes specific configurations for the module and its peripherals. diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile index f6764eb..f8d3836 100644 --- a/arch/arm/mach-mx2/Makefile +++ b/arch/arm/mach-mx2/Makefile @@ -10,3 +10,4 @@ obj-$(CONFIG_MACH_MX27) += cpu_imx27.o obj-$(CONFIG_MACH_MX27) += clock_imx27.o obj-$(CONFIG_MACH_MX27ADS) += mx27ads.o +obj-$(CONFIG_MACH_PCM038) += pcm038.o diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c new file mode 100644 index 0000000..46fc026 --- /dev/null +++ b/arch/arm/mach-mx2/pcm038.c @@ -0,0 +1,200 @@ +/* + * Copyright 2007 Robert Schwebel , Pengutronix + * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * Phytec's phyCORE-i.MX27 comes with 32MiB flash, + * 16 bit width + */ +static struct physmap_flash_data pcm038_flash_data = { + .width = 2, +}; + +static struct resource pcm038_flash_resource = { + .start = 0xc0000000, + .end = 0xc1ffffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device pcm038_nor_mtd_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &pcm038_flash_data, + }, + .num_resources = 1, + .resource = &pcm038_flash_resource, +}; + +static int mxc_uart0_pins[] = { + PE12_PF_UART1_TXD, + PE13_PF_UART1_RXD, + PE14_PF_UART1_CTS, + PE15_PF_UART1_RTS +}; + +static int uart_mxc_port0_init(struct platform_device *pdev) +{ + return mxc_gpio_setup_multiple_pins(mxc_uart0_pins, + ARRAY_SIZE(mxc_uart0_pins), + MXC_GPIO_ALLOC_MODE_NORMAL, "UART0"); +} + +static int uart_mxc_port0_exit(struct platform_device *pdev) +{ + return mxc_gpio_setup_multiple_pins(mxc_uart0_pins, + ARRAY_SIZE(mxc_uart0_pins), + MXC_GPIO_ALLOC_MODE_RELEASE, "UART0"); +} + +static int mxc_uart1_pins[] = { + PE3_PF_UART2_CTS, + PE4_PF_UART2_RTS, + PE6_PF_UART2_TXD, + PE7_PF_UART2_RXD +}; + +static int uart_mxc_port1_init(struct platform_device *pdev) +{ + return mxc_gpio_setup_multiple_pins(mxc_uart1_pins, + ARRAY_SIZE(mxc_uart1_pins), + MXC_GPIO_ALLOC_MODE_NORMAL, "UART1"); +} + +static int uart_mxc_port1_exit(struct platform_device *pdev) +{ + return mxc_gpio_setup_multiple_pins(mxc_uart1_pins, + ARRAY_SIZE(mxc_uart1_pins), + MXC_GPIO_ALLOC_MODE_RELEASE, "UART1"); +} + +static int mxc_uart2_pins[] = { PE10_PF_UART3_CTS, + PE9_PF_UART3_RXD, + PE10_PF_UART3_CTS, + PE9_PF_UART3_RXD }; + +static int uart_mxc_port2_init(struct platform_device *pdev) +{ + return mxc_gpio_setup_multiple_pins(mxc_uart2_pins, + ARRAY_SIZE(mxc_uart2_pins), + MXC_GPIO_ALLOC_MODE_NORMAL, "UART2"); +} + +static int uart_mxc_port2_exit(struct platform_device *pdev) +{ + return mxc_gpio_setup_multiple_pins(mxc_uart2_pins, + ARRAY_SIZE(mxc_uart2_pins), + MXC_GPIO_ALLOC_MODE_RELEASE, "UART2"); +} + +static struct imxuart_platform_data uart_pdata[] = { + { + .init = uart_mxc_port0_init, + .exit = uart_mxc_port0_exit, + .flags = IMXUART_HAVE_RTSCTS, + }, { + .init = uart_mxc_port1_init, + .exit = uart_mxc_port1_exit, + .flags = IMXUART_HAVE_RTSCTS, + }, { + .init = uart_mxc_port2_init, + .exit = uart_mxc_port2_exit, + .flags = IMXUART_HAVE_RTSCTS, + }, +}; + +static int mxc_fec_pins[] = { + PD0_AIN_FEC_TXD0, + PD1_AIN_FEC_TXD1, + PD2_AIN_FEC_TXD2, + PD3_AIN_FEC_TXD3, + PD4_AOUT_FEC_RX_ER, + PD5_AOUT_FEC_RXD1, + PD6_AOUT_FEC_RXD2, + PD7_AOUT_FEC_RXD3, + PD8_AF_FEC_MDIO, + PD9_AIN_FEC_MDC, + PD10_AOUT_FEC_CRS, + PD11_AOUT_FEC_TX_CLK, + PD12_AOUT_FEC_RXD0, + PD13_AOUT_FEC_RX_DV, + PD14_AOUT_FEC_CLR, + PD15_AOUT_FEC_COL, + PD16_AIN_FEC_TX_ER, + PF23_AIN_FEC_TX_EN +}; + +static void gpio_fec_active(void) +{ + mxc_gpio_setup_multiple_pins(mxc_fec_pins, + ARRAY_SIZE(mxc_fec_pins), + MXC_GPIO_ALLOC_MODE_NORMAL, "FEC"); +} + +static void gpio_fec_inactive(void) +{ + mxc_gpio_setup_multiple_pins(mxc_fec_pins, + ARRAY_SIZE(mxc_fec_pins), + MXC_GPIO_ALLOC_MODE_RELEASE, "FEC"); +} + +static struct platform_device *platform_devices[] __initdata = { + &pcm038_nor_mtd_device, +}; + +static void __init pcm038_init(void) +{ + int i; + gpio_fec_active(); + + for (i = 0; i < 3; i++) + imx_init_uart(i, &uart_pdata[i]); + + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); +} + +static void __init pcm038_timer_init(void) +{ + mxc_clocks_init(26000000); + mxc_timer_init("gpt_clk.0"); +} + +struct sys_timer pcm038_timer = { + .init = pcm038_timer_init, +}; + +MACHINE_START(PCM038, "phyCORE-i.MX27") + .phys_io = AIPI_BASE_ADDR, + .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = PHYS_OFFSET + 0x100, + .map_io = mxc_map_io, + .init_irq = mxc_init_irq, + .init_machine = pcm038_init, + .timer = &pcm038_timer, +MACHINE_END -- cgit v1.1 From ff6552e4f3505da9c2886098773146be71c872e3 Mon Sep 17 00:00:00 2001 From: Juergen Beisert Date: Sat, 5 Jul 2008 10:03:01 +0200 Subject: i.MX27 family: Add the Phytec PCM970 evaluation board The Phytec phyCORE-i.MX27 CPU module is delivered with the PCM970 baseboard by default. This patch adds support for the hardware. This code is only an empty stub; it is filled up with functionality in a later patch series. Signed-off-by: Juergen Beisert --- arch/arm/mach-mx2/Kconfig | 14 ++++++++++++++ arch/arm/mach-mx2/Makefile | 1 + arch/arm/mach-mx2/pcm038.c | 4 ++++ arch/arm/mach-mx2/pcm970-baseboard.c | 32 ++++++++++++++++++++++++++++++++ 4 files changed, 51 insertions(+) create mode 100644 arch/arm/mach-mx2/pcm970-baseboard.c (limited to 'arch') diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig index 4c19e1c..1eaa97c 100644 --- a/arch/arm/mach-mx2/Kconfig +++ b/arch/arm/mach-mx2/Kconfig @@ -23,3 +23,17 @@ config MACH_PCM038 help Include support for phyCORE-i.MX27 (aka pcm038) platform. This includes specific configurations for the module and its peripherals. + +choice + prompt "Baseboard" + depends on MACH_PCM038 + default MACH_PCM970_BASEBOARD + +config MACH_PCM970_BASEBOARD + prompt "PHYTEC PCM970 development board" + bool + help + This adds board specific devices that can be found on Phytec's + PCM970 evaluation board. + +endchoice diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile index f8d3836..382d860 100644 --- a/arch/arm/mach-mx2/Makefile +++ b/arch/arm/mach-mx2/Makefile @@ -11,3 +11,4 @@ obj-$(CONFIG_MACH_MX27) += clock_imx27.o obj-$(CONFIG_MACH_MX27ADS) += mx27ads.o obj-$(CONFIG_MACH_PCM038) += pcm038.o +obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c index 46fc026..a9a28f5 100644 --- a/arch/arm/mach-mx2/pcm038.c +++ b/arch/arm/mach-mx2/pcm038.c @@ -177,6 +177,10 @@ static void __init pcm038_init(void) imx_init_uart(i, &uart_pdata[i]); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); + +#ifdef CONFIG_MACH_PCM970_BASEBOARD + pcm970_baseboard_init(); +#endif } static void __init pcm038_timer_init(void) diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-mx2/pcm970-baseboard.c new file mode 100644 index 0000000..028ac4d --- /dev/null +++ b/arch/arm/mach-mx2/pcm970-baseboard.c @@ -0,0 +1,32 @@ +/* + * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#include +#include +#include +#include + +/* + * system init for baseboard usage. Will be called by pcm038 init. + * + * Add platform devices present on this baseboard and init + * them from CPU side as far as required to use them later on + */ +void __init pcm970_baseboard_init(void) +{ +} -- cgit v1.1 From 1bd55a436f1f90de0e7f476e514e01bd67497b88 Mon Sep 17 00:00:00 2001 From: Juergen Beisert Date: Sat, 5 Jul 2008 10:03:02 +0200 Subject: i.MX2 family: Add basic mach support This patch adds basic mach support for the mx2 processor family, based on the original freescale code and adapted to mainline kernel coding style. This part adds the global build only. Signed-off-by: Juergen Beisert --- arch/arm/Makefile | 1 + arch/arm/mm/Kconfig | 4 ++-- arch/arm/plat-mxc/Kconfig | 8 +++++++- 3 files changed, 10 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/Makefile b/arch/arm/Makefile index e72db27..009d4fe 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -137,6 +137,7 @@ endif machine-$(CONFIG_ARCH_DAVINCI) := davinci machine-$(CONFIG_ARCH_KS8695) := ks8695 incdir-$(CONFIG_ARCH_MXC) := mxc + machine-$(CONFIG_ARCH_MX2) := mx2 machine-$(CONFIG_ARCH_MX3) := mx3 machine-$(CONFIG_ARCH_ORION5X) := orion5x machine-$(CONFIG_ARCH_MSM7X00A) := msm diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 33ed048..68ea247 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -180,8 +180,8 @@ config CPU_ARM925T # ARM926T config CPU_ARM926T bool "Support ARM926T processor" - depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || ARCH_NS9XXX || ARCH_DAVINCI - default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || ARCH_NS9XXX || ARCH_DAVINCI + depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || ARCH_NS9XXX || ARCH_DAVINCI || ARCH_MX2 + default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || ARCH_NS9XXX || ARCH_DAVINCI || ARCH_MX2 select CPU_32v5 select CPU_ABRT_EV5TJ select CPU_PABRT_NOIFAR diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig index bb6e127..e14eaad 100644 --- a/arch/arm/plat-mxc/Kconfig +++ b/arch/arm/plat-mxc/Kconfig @@ -3,9 +3,14 @@ if ARCH_MXC menu "Freescale MXC Implementations" choice - prompt "MXC/iMX System Type" + prompt "MXC/iMX Base Type" default ARCH_MX3 +config ARCH_MX2 + bool "MX2-based" + help + This enables support for systems based on the Freescale i.MX2 family + config ARCH_MX3 bool "MX3-based" help @@ -13,6 +18,7 @@ config ARCH_MX3 endchoice +source "arch/arm/mach-mx2/Kconfig" source "arch/arm/mach-mx3/Kconfig" endmenu -- cgit v1.1