From e2b35f3dbfc080f15b72834d08f04f0269dbe9be Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 1 Feb 2012 16:12:27 +0530 Subject: dmaengine/dw_dmac: Fix dw_dmac user drivers to adapt to slave_config changes There are few existing user drivers of dw_dmac. They will break as soon as we remove unused fields from struct dw_dma_slave. This patch focuses to fix these user drivers to use dma_slave_config() routine. Signed-off-by: Viresh Kumar Signed-off-by: Vinod Koul --- arch/avr32/mach-at32ap/at32ap700x.c | 13 ------------- arch/avr32/mach-at32ap/include/mach/atmel-mci.h | 7 ------- 2 files changed, 20 deletions(-) (limited to 'arch') diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c index 402a7bb..43c44e7 100644 --- a/arch/avr32/mach-at32ap/at32ap700x.c +++ b/arch/avr32/mach-at32ap/at32ap700x.c @@ -1353,7 +1353,6 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data) goto fail; slave->sdata.dma_dev = &dw_dmac0_device.dev; - slave->sdata.reg_width = DW_DMA_SLAVE_WIDTH_32BIT; slave->sdata.cfg_hi = (DWC_CFGH_SRC_PER(0) | DWC_CFGH_DST_PER(1)); slave->sdata.cfg_lo &= ~(DWC_CFGL_HS_DST_POL @@ -2048,27 +2047,19 @@ at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data, /* Check if DMA slave interface for capture should be configured. */ if (flags & AC97C_CAPTURE) { rx_dws->dma_dev = &dw_dmac0_device.dev; - rx_dws->reg_width = DW_DMA_SLAVE_WIDTH_16BIT; rx_dws->cfg_hi = DWC_CFGH_SRC_PER(3); rx_dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL | DWC_CFGL_HS_SRC_POL); rx_dws->src_master = 0; rx_dws->dst_master = 1; - rx_dws->src_msize = DW_DMA_MSIZE_1; - rx_dws->dst_msize = DW_DMA_MSIZE_1; - rx_dws->fc = DW_DMA_FC_D_P2M; } /* Check if DMA slave interface for playback should be configured. */ if (flags & AC97C_PLAYBACK) { tx_dws->dma_dev = &dw_dmac0_device.dev; - tx_dws->reg_width = DW_DMA_SLAVE_WIDTH_16BIT; tx_dws->cfg_hi = DWC_CFGH_DST_PER(4); tx_dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL | DWC_CFGL_HS_SRC_POL); tx_dws->src_master = 0; tx_dws->dst_master = 1; - tx_dws->src_msize = DW_DMA_MSIZE_1; - tx_dws->dst_msize = DW_DMA_MSIZE_1; - tx_dws->fc = DW_DMA_FC_D_M2P; } if (platform_device_add_data(pdev, data, @@ -2138,14 +2129,10 @@ at32_add_device_abdac(unsigned int id, struct atmel_abdac_pdata *data) dws = &data->dws; dws->dma_dev = &dw_dmac0_device.dev; - dws->reg_width = DW_DMA_SLAVE_WIDTH_32BIT; dws->cfg_hi = DWC_CFGH_DST_PER(2); dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL | DWC_CFGL_HS_SRC_POL); dws->src_master = 0; dws->dst_master = 1; - dws->src_msize = DW_DMA_MSIZE_1; - dws->dst_msize = DW_DMA_MSIZE_1; - dws->fc = DW_DMA_FC_D_M2P; if (platform_device_add_data(pdev, data, sizeof(struct atmel_abdac_pdata))) diff --git a/arch/avr32/mach-at32ap/include/mach/atmel-mci.h b/arch/avr32/mach-at32ap/include/mach/atmel-mci.h index a9b3896..4bba585 100644 --- a/arch/avr32/mach-at32ap/include/mach/atmel-mci.h +++ b/arch/avr32/mach-at32ap/include/mach/atmel-mci.h @@ -14,11 +14,4 @@ struct mci_dma_data { #define slave_data_ptr(s) (&(s)->sdata) #define find_slave_dev(s) ((s)->sdata.dma_dev) -#define setup_dma_addr(s, t, r) do { \ - if (s) { \ - (s)->sdata.tx_reg = (t); \ - (s)->sdata.rx_reg = (r); \ - } \ -} while (0) - #endif /* __MACH_ATMEL_MCI_H */ -- cgit v1.1 From b7d861d9394534db94f0fb8f4b9d984f996d0528 Mon Sep 17 00:00:00 2001 From: Boojin Kim Date: Mon, 26 Dec 2011 18:49:52 +0900 Subject: DMA: PL330: Merge PL330 driver into drivers/dma/ Currently there were two part of DMAC PL330 driver for support old styled s3c-pl330 which has been merged into drivers/dma/pl330.c driver. Actually, there is no reason to separate them now. Basically this patch merges arch/arm/common/pl330.c into drivers/dma/pl330.c driver and removes useless exported symbol, externed function and so on. The newer pl330 driver tested on SMDKV310 and SMDK4212 boards Cc: Jassi Brar Cc: Russell King Acked-by: Linus Walleij Acked-by: Vinod Koul Signed-off-by: Boojin Kim Signed-off-by: Kukjin Kim Acked-by: Jassi Brar Signed-off-by: Vinod Koul --- arch/arm/common/Kconfig | 3 - arch/arm/common/Makefile | 1 - arch/arm/common/pl330.c | 1959 --------------------------------- arch/arm/include/asm/hardware/pl330.h | 217 ---- 4 files changed, 2180 deletions(-) delete mode 100644 arch/arm/common/pl330.c delete mode 100644 arch/arm/include/asm/hardware/pl330.h (limited to 'arch') diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig index 81a933e..a43c758 100644 --- a/arch/arm/common/Kconfig +++ b/arch/arm/common/Kconfig @@ -24,9 +24,6 @@ config ARM_VIC_NR config ICST bool -config PL330 - bool - config SA1111 bool select DMABOUNCE if !ARCH_PXA diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile index 6ea9b6f..107d6d9 100644 --- a/arch/arm/common/Makefile +++ b/arch/arm/common/Makefile @@ -5,7 +5,6 @@ obj-$(CONFIG_ARM_GIC) += gic.o obj-$(CONFIG_ARM_VIC) += vic.o obj-$(CONFIG_ICST) += icst.o -obj-$(CONFIG_PL330) += pl330.o obj-$(CONFIG_SA1111) += sa1111.o obj-$(CONFIG_PCI_HOST_VIA82C505) += via82c505.o obj-$(CONFIG_DMABOUNCE) += dmabounce.o diff --git a/arch/arm/common/pl330.c b/arch/arm/common/pl330.c deleted file mode 100644 index d8e44a4..0000000 --- a/arch/arm/common/pl330.c +++ /dev/null @@ -1,1959 +0,0 @@ -/* linux/arch/arm/common/pl330.c - * - * Copyright (C) 2010 Samsung Electronics Co Ltd. - * Jaswinder Singh - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -/* Register and Bit field Definitions */ -#define DS 0x0 -#define DS_ST_STOP 0x0 -#define DS_ST_EXEC 0x1 -#define DS_ST_CMISS 0x2 -#define DS_ST_UPDTPC 0x3 -#define DS_ST_WFE 0x4 -#define DS_ST_ATBRR 0x5 -#define DS_ST_QBUSY 0x6 -#define DS_ST_WFP 0x7 -#define DS_ST_KILL 0x8 -#define DS_ST_CMPLT 0x9 -#define DS_ST_FLTCMP 0xe -#define DS_ST_FAULT 0xf - -#define DPC 0x4 -#define INTEN 0x20 -#define ES 0x24 -#define INTSTATUS 0x28 -#define INTCLR 0x2c -#define FSM 0x30 -#define FSC 0x34 -#define FTM 0x38 - -#define _FTC 0x40 -#define FTC(n) (_FTC + (n)*0x4) - -#define _CS 0x100 -#define CS(n) (_CS + (n)*0x8) -#define CS_CNS (1 << 21) - -#define _CPC 0x104 -#define CPC(n) (_CPC + (n)*0x8) - -#define _SA 0x400 -#define SA(n) (_SA + (n)*0x20) - -#define _DA 0x404 -#define DA(n) (_DA + (n)*0x20) - -#define _CC 0x408 -#define CC(n) (_CC + (n)*0x20) - -#define CC_SRCINC (1 << 0) -#define CC_DSTINC (1 << 14) -#define CC_SRCPRI (1 << 8) -#define CC_DSTPRI (1 << 22) -#define CC_SRCNS (1 << 9) -#define CC_DSTNS (1 << 23) -#define CC_SRCIA (1 << 10) -#define CC_DSTIA (1 << 24) -#define CC_SRCBRSTLEN_SHFT 4 -#define CC_DSTBRSTLEN_SHFT 18 -#define CC_SRCBRSTSIZE_SHFT 1 -#define CC_DSTBRSTSIZE_SHFT 15 -#define CC_SRCCCTRL_SHFT 11 -#define CC_SRCCCTRL_MASK 0x7 -#define CC_DSTCCTRL_SHFT 25 -#define CC_DRCCCTRL_MASK 0x7 -#define CC_SWAP_SHFT 28 - -#define _LC0 0x40c -#define LC0(n) (_LC0 + (n)*0x20) - -#define _LC1 0x410 -#define LC1(n) (_LC1 + (n)*0x20) - -#define DBGSTATUS 0xd00 -#define DBG_BUSY (1 << 0) - -#define DBGCMD 0xd04 -#define DBGINST0 0xd08 -#define DBGINST1 0xd0c - -#define CR0 0xe00 -#define CR1 0xe04 -#define CR2 0xe08 -#define CR3 0xe0c -#define CR4 0xe10 -#define CRD 0xe14 - -#define PERIPH_ID 0xfe0 -#define PCELL_ID 0xff0 - -#define CR0_PERIPH_REQ_SET (1 << 0) -#define CR0_BOOT_EN_SET (1 << 1) -#define CR0_BOOT_MAN_NS (1 << 2) -#define CR0_NUM_CHANS_SHIFT 4 -#define CR0_NUM_CHANS_MASK 0x7 -#define CR0_NUM_PERIPH_SHIFT 12 -#define CR0_NUM_PERIPH_MASK 0x1f -#define CR0_NUM_EVENTS_SHIFT 17 -#define CR0_NUM_EVENTS_MASK 0x1f - -#define CR1_ICACHE_LEN_SHIFT 0 -#define CR1_ICACHE_LEN_MASK 0x7 -#define CR1_NUM_ICACHELINES_SHIFT 4 -#define CR1_NUM_ICACHELINES_MASK 0xf - -#define CRD_DATA_WIDTH_SHIFT 0 -#define CRD_DATA_WIDTH_MASK 0x7 -#define CRD_WR_CAP_SHIFT 4 -#define CRD_WR_CAP_MASK 0x7 -#define CRD_WR_Q_DEP_SHIFT 8 -#define CRD_WR_Q_DEP_MASK 0xf -#define CRD_RD_CAP_SHIFT 12 -#define CRD_RD_CAP_MASK 0x7 -#define CRD_RD_Q_DEP_SHIFT 16 -#define CRD_RD_Q_DEP_MASK 0xf -#define CRD_DATA_BUFF_SHIFT 20 -#define CRD_DATA_BUFF_MASK 0x3ff - -#define PART 0x330 -#define DESIGNER 0x41 -#define REVISION 0x0 -#define INTEG_CFG 0x0 -#define PERIPH_ID_VAL ((PART << 0) | (DESIGNER << 12)) - -#define PCELL_ID_VAL 0xb105f00d - -#define PL330_STATE_STOPPED (1 << 0) -#define PL330_STATE_EXECUTING (1 << 1) -#define PL330_STATE_WFE (1 << 2) -#define PL330_STATE_FAULTING (1 << 3) -#define PL330_STATE_COMPLETING (1 << 4) -#define PL330_STATE_WFP (1 << 5) -#define PL330_STATE_KILLING (1 << 6) -#define PL330_STATE_FAULT_COMPLETING (1 << 7) -#define PL330_STATE_CACHEMISS (1 << 8) -#define PL330_STATE_UPDTPC (1 << 9) -#define PL330_STATE_ATBARRIER (1 << 10) -#define PL330_STATE_QUEUEBUSY (1 << 11) -#define PL330_STATE_INVALID (1 << 15) - -#define PL330_STABLE_STATES (PL330_STATE_STOPPED | PL330_STATE_EXECUTING \ - | PL330_STATE_WFE | PL330_STATE_FAULTING) - -#define CMD_DMAADDH 0x54 -#define CMD_DMAEND 0x00 -#define CMD_DMAFLUSHP 0x35 -#define CMD_DMAGO 0xa0 -#define CMD_DMALD 0x04 -#define CMD_DMALDP 0x25 -#define CMD_DMALP 0x20 -#define CMD_DMALPEND 0x28 -#define CMD_DMAKILL 0x01 -#define CMD_DMAMOV 0xbc -#define CMD_DMANOP 0x18 -#define CMD_DMARMB 0x12 -#define CMD_DMASEV 0x34 -#define CMD_DMAST 0x08 -#define CMD_DMASTP 0x29 -#define CMD_DMASTZ 0x0c -#define CMD_DMAWFE 0x36 -#define CMD_DMAWFP 0x30 -#define CMD_DMAWMB 0x13 - -#define SZ_DMAADDH 3 -#define SZ_DMAEND 1 -#define SZ_DMAFLUSHP 2 -#define SZ_DMALD 1 -#define SZ_DMALDP 2 -#define SZ_DMALP 2 -#define SZ_DMALPEND 2 -#define SZ_DMAKILL 1 -#define SZ_DMAMOV 6 -#define SZ_DMANOP 1 -#define SZ_DMARMB 1 -#define SZ_DMASEV 2 -#define SZ_DMAST 1 -#define SZ_DMASTP 2 -#define SZ_DMASTZ 1 -#define SZ_DMAWFE 2 -#define SZ_DMAWFP 2 -#define SZ_DMAWMB 1 -#define SZ_DMAGO 6 - -#define BRST_LEN(ccr) ((((ccr) >> CC_SRCBRSTLEN_SHFT) & 0xf) + 1) -#define BRST_SIZE(ccr) (1 << (((ccr) >> CC_SRCBRSTSIZE_SHFT) & 0x7)) - -#define BYTE_TO_BURST(b, ccr) ((b) / BRST_SIZE(ccr) / BRST_LEN(ccr)) -#define BURST_TO_BYTE(c, ccr) ((c) * BRST_SIZE(ccr) * BRST_LEN(ccr)) - -/* - * With 256 bytes, we can do more than 2.5MB and 5MB xfers per req - * at 1byte/burst for P<->M and M<->M respectively. - * For typical scenario, at 1word/burst, 10MB and 20MB xfers per req - * should be enough for P<->M and M<->M respectively. - */ -#define MCODE_BUFF_PER_REQ 256 - -/* If the _pl330_req is available to the client */ -#define IS_FREE(req) (*((u8 *)((req)->mc_cpu)) == CMD_DMAEND) - -/* Use this _only_ to wait on transient states */ -#define UNTIL(t, s) while (!(_state(t) & (s))) cpu_relax(); - -#ifdef PL330_DEBUG_MCGEN -static unsigned cmd_line; -#define PL330_DBGCMD_DUMP(off, x...) do { \ - printk("%x:", cmd_line); \ - printk(x); \ - cmd_line += off; \ - } while (0) -#define PL330_DBGMC_START(addr) (cmd_line = addr) -#else -#define PL330_DBGCMD_DUMP(off, x...) do {} while (0) -#define PL330_DBGMC_START(addr) do {} while (0) -#endif - -struct _xfer_spec { - u32 ccr; - struct pl330_req *r; - struct pl330_xfer *x; -}; - -enum dmamov_dst { - SAR = 0, - CCR, - DAR, -}; - -enum pl330_dst { - SRC = 0, - DST, -}; - -enum pl330_cond { - SINGLE, - BURST, - ALWAYS, -}; - -struct _pl330_req { - u32 mc_bus; - void *mc_cpu; - /* Number of bytes taken to setup MC for the req */ - u32 mc_len; - struct pl330_req *r; - /* Hook to attach to DMAC's list of reqs with due callback */ - struct list_head rqd; -}; - -/* ToBeDone for tasklet */ -struct _pl330_tbd { - bool reset_dmac; - bool reset_mngr; - u8 reset_chan; -}; - -/* A DMAC Thread */ -struct pl330_thread { - u8 id; - int ev; - /* If the channel is not yet acquired by any client */ - bool free; - /* Parent DMAC */ - struct pl330_dmac *dmac; - /* Only two at a time */ - struct _pl330_req req[2]; - /* Index of the last enqueued request */ - unsigned lstenq; - /* Index of the last submitted request or -1 if the DMA is stopped */ - int req_running; -}; - -enum pl330_dmac_state { - UNINIT, - INIT, - DYING, -}; - -/* A DMAC */ -struct pl330_dmac { - spinlock_t lock; - /* Holds list of reqs with due callbacks */ - struct list_head req_done; - /* Pointer to platform specific stuff */ - struct pl330_info *pinfo; - /* Maximum possible events/irqs */ - int events[32]; - /* BUS address of MicroCode buffer */ - u32 mcode_bus; - /* CPU address of MicroCode buffer */ - void *mcode_cpu; - /* List of all Channel threads */ - struct pl330_thread *channels; - /* Pointer to the MANAGER thread */ - struct pl330_thread *manager; - /* To handle bad news in interrupt */ - struct tasklet_struct tasks; - struct _pl330_tbd dmac_tbd; - /* State of DMAC operation */ - enum pl330_dmac_state state; -}; - -static inline void _callback(struct pl330_req *r, enum pl330_op_err err) -{ - if (r && r->xfer_cb) - r->xfer_cb(r->token, err); -} - -static inline bool _queue_empty(struct pl330_thread *thrd) -{ - return (IS_FREE(&thrd->req[0]) && IS_FREE(&thrd->req[1])) - ? true : false; -} - -static inline bool _queue_full(struct pl330_thread *thrd) -{ - return (IS_FREE(&thrd->req[0]) || IS_FREE(&thrd->req[1])) - ? false : true; -} - -static inline bool is_manager(struct pl330_thread *thrd) -{ - struct pl330_dmac *pl330 = thrd->dmac; - - /* MANAGER is indexed at the end */ - if (thrd->id == pl330->pinfo->pcfg.num_chan) - return true; - else - return false; -} - -/* If manager of the thread is in Non-Secure mode */ -static inline bool _manager_ns(struct pl330_thread *thrd) -{ - struct pl330_dmac *pl330 = thrd->dmac; - - return (pl330->pinfo->pcfg.mode & DMAC_MODE_NS) ? true : false; -} - -static inline u32 get_id(struct pl330_info *pi, u32 off) -{ - void __iomem *regs = pi->base; - u32 id = 0; - - id |= (readb(regs + off + 0x0) << 0); - id |= (readb(regs + off + 0x4) << 8); - id |= (readb(regs + off + 0x8) << 16); - id |= (readb(regs + off + 0xc) << 24); - - return id; -} - -static inline u32 _emit_ADDH(unsigned dry_run, u8 buf[], - enum pl330_dst da, u16 val) -{ - if (dry_run) - return SZ_DMAADDH; - - buf[0] = CMD_DMAADDH; - buf[0] |= (da << 1); - *((u16 *)&buf[1]) = val; - - PL330_DBGCMD_DUMP(SZ_DMAADDH, "\tDMAADDH %s %u\n", - da == 1 ? "DA" : "SA", val); - - return SZ_DMAADDH; -} - -static inline u32 _emit_END(unsigned dry_run, u8 buf[]) -{ - if (dry_run) - return SZ_DMAEND; - - buf[0] = CMD_DMAEND; - - PL330_DBGCMD_DUMP(SZ_DMAEND, "\tDMAEND\n"); - - return SZ_DMAEND; -} - -static inline u32 _emit_FLUSHP(unsigned dry_run, u8 buf[], u8 peri) -{ - if (dry_run) - return SZ_DMAFLUSHP; - - buf[0] = CMD_DMAFLUSHP; - - peri &= 0x1f; - peri <<= 3; - buf[1] = peri; - - PL330_DBGCMD_DUMP(SZ_DMAFLUSHP, "\tDMAFLUSHP %u\n", peri >> 3); - - return SZ_DMAFLUSHP; -} - -static inline u32 _emit_LD(unsigned dry_run, u8 buf[], enum pl330_cond cond) -{ - if (dry_run) - return SZ_DMALD; - - buf[0] = CMD_DMALD; - - if (cond == SINGLE) - buf[0] |= (0 << 1) | (1 << 0); - else if (cond == BURST) - buf[0] |= (1 << 1) | (1 << 0); - - PL330_DBGCMD_DUMP(SZ_DMALD, "\tDMALD%c\n", - cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A')); - - return SZ_DMALD; -} - -static inline u32 _emit_LDP(unsigned dry_run, u8 buf[], - enum pl330_cond cond, u8 peri) -{ - if (dry_run) - return SZ_DMALDP; - - buf[0] = CMD_DMALDP; - - if (cond == BURST) - buf[0] |= (1 << 1); - - peri &= 0x1f; - peri <<= 3; - buf[1] = peri; - - PL330_DBGCMD_DUMP(SZ_DMALDP, "\tDMALDP%c %u\n", - cond == SINGLE ? 'S' : 'B', peri >> 3); - - return SZ_DMALDP; -} - -static inline u32 _emit_LP(unsigned dry_run, u8 buf[], - unsigned loop, u8 cnt) -{ - if (dry_run) - return SZ_DMALP; - - buf[0] = CMD_DMALP; - - if (loop) - buf[0] |= (1 << 1); - - cnt--; /* DMAC increments by 1 internally */ - buf[1] = cnt; - - PL330_DBGCMD_DUMP(SZ_DMALP, "\tDMALP_%c %u\n", loop ? '1' : '0', cnt); - - return SZ_DMALP; -} - -struct _arg_LPEND { - enum pl330_cond cond; - bool forever; - unsigned loop; - u8 bjump; -}; - -static inline u32 _emit_LPEND(unsigned dry_run, u8 buf[], - const struct _arg_LPEND *arg) -{ - enum pl330_cond cond = arg->cond; - bool forever = arg->forever; - unsigned loop = arg->loop; - u8 bjump = arg->bjump; - - if (dry_run) - return SZ_DMALPEND; - - buf[0] = CMD_DMALPEND; - - if (loop) - buf[0] |= (1 << 2); - - if (!forever) - buf[0] |= (1 << 4); - - if (cond == SINGLE) - buf[0] |= (0 << 1) | (1 << 0); - else if (cond == BURST) - buf[0] |= (1 << 1) | (1 << 0); - - buf[1] = bjump; - - PL330_DBGCMD_DUMP(SZ_DMALPEND, "\tDMALP%s%c_%c bjmpto_%x\n", - forever ? "FE" : "END", - cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'), - loop ? '1' : '0', - bjump); - - return SZ_DMALPEND; -} - -static inline u32 _emit_KILL(unsigned dry_run, u8 buf[]) -{ - if (dry_run) - return SZ_DMAKILL; - - buf[0] = CMD_DMAKILL; - - return SZ_DMAKILL; -} - -static inline u32 _emit_MOV(unsigned dry_run, u8 buf[], - enum dmamov_dst dst, u32 val) -{ - if (dry_run) - return SZ_DMAMOV; - - buf[0] = CMD_DMAMOV; - buf[1] = dst; - *((u32 *)&buf[2]) = val; - - PL330_DBGCMD_DUMP(SZ_DMAMOV, "\tDMAMOV %s 0x%x\n", - dst == SAR ? "SAR" : (dst == DAR ? "DAR" : "CCR"), val); - - return SZ_DMAMOV; -} - -static inline u32 _emit_NOP(unsigned dry_run, u8 buf[]) -{ - if (dry_run) - return SZ_DMANOP; - - buf[0] = CMD_DMANOP; - - PL330_DBGCMD_DUMP(SZ_DMANOP, "\tDMANOP\n"); - - return SZ_DMANOP; -} - -static inline u32 _emit_RMB(unsigned dry_run, u8 buf[]) -{ - if (dry_run) - return SZ_DMARMB; - - buf[0] = CMD_DMARMB; - - PL330_DBGCMD_DUMP(SZ_DMARMB, "\tDMARMB\n"); - - return SZ_DMARMB; -} - -static inline u32 _emit_SEV(unsigned dry_run, u8 buf[], u8 ev) -{ - if (dry_run) - return SZ_DMASEV; - - buf[0] = CMD_DMASEV; - - ev &= 0x1f; - ev <<= 3; - buf[1] = ev; - - PL330_DBGCMD_DUMP(SZ_DMASEV, "\tDMASEV %u\n", ev >> 3); - - return SZ_DMASEV; -} - -static inline u32 _emit_ST(unsigned dry_run, u8 buf[], enum pl330_cond cond) -{ - if (dry_run) - return SZ_DMAST; - - buf[0] = CMD_DMAST; - - if (cond == SINGLE) - buf[0] |= (0 << 1) | (1 << 0); - else if (cond == BURST) - buf[0] |= (1 << 1) | (1 << 0); - - PL330_DBGCMD_DUMP(SZ_DMAST, "\tDMAST%c\n", - cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A')); - - return SZ_DMAST; -} - -static inline u32 _emit_STP(unsigned dry_run, u8 buf[], - enum pl330_cond cond, u8 peri) -{ - if (dry_run) - return SZ_DMASTP; - - buf[0] = CMD_DMASTP; - - if (cond == BURST) - buf[0] |= (1 << 1); - - peri &= 0x1f; - peri <<= 3; - buf[1] = peri; - - PL330_DBGCMD_DUMP(SZ_DMASTP, "\tDMASTP%c %u\n", - cond == SINGLE ? 'S' : 'B', peri >> 3); - - return SZ_DMASTP; -} - -static inline u32 _emit_STZ(unsigned dry_run, u8 buf[]) -{ - if (dry_run) - return SZ_DMASTZ; - - buf[0] = CMD_DMASTZ; - - PL330_DBGCMD_DUMP(SZ_DMASTZ, "\tDMASTZ\n"); - - return SZ_DMASTZ; -} - -static inline u32 _emit_WFE(unsigned dry_run, u8 buf[], u8 ev, - unsigned invalidate) -{ - if (dry_run) - return SZ_DMAWFE; - - buf[0] = CMD_DMAWFE; - - ev &= 0x1f; - ev <<= 3; - buf[1] = ev; - - if (invalidate) - buf[1] |= (1 << 1); - - PL330_DBGCMD_DUMP(SZ_DMAWFE, "\tDMAWFE %u%s\n", - ev >> 3, invalidate ? ", I" : ""); - - return SZ_DMAWFE; -} - -static inline u32 _emit_WFP(unsigned dry_run, u8 buf[], - enum pl330_cond cond, u8 peri) -{ - if (dry_run) - return SZ_DMAWFP; - - buf[0] = CMD_DMAWFP; - - if (cond == SINGLE) - buf[0] |= (0 << 1) | (0 << 0); - else if (cond == BURST) - buf[0] |= (1 << 1) | (0 << 0); - else - buf[0] |= (0 << 1) | (1 << 0); - - peri &= 0x1f; - peri <<= 3; - buf[1] = peri; - - PL330_DBGCMD_DUMP(SZ_DMAWFP, "\tDMAWFP%c %u\n", - cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'P'), peri >> 3); - - return SZ_DMAWFP; -} - -static inline u32 _emit_WMB(unsigned dry_run, u8 buf[]) -{ - if (dry_run) - return SZ_DMAWMB; - - buf[0] = CMD_DMAWMB; - - PL330_DBGCMD_DUMP(SZ_DMAWMB, "\tDMAWMB\n"); - - return SZ_DMAWMB; -} - -struct _arg_GO { - u8 chan; - u32 addr; - unsigned ns; -}; - -static inline u32 _emit_GO(unsigned dry_run, u8 buf[], - const struct _arg_GO *arg) -{ - u8 chan = arg->chan; - u32 addr = arg->addr; - unsigned ns = arg->ns; - - if (dry_run) - return SZ_DMAGO; - - buf[0] = CMD_DMAGO; - buf[0] |= (ns << 1); - - buf[1] = chan & 0x7; - - *((u32 *)&buf[2]) = addr; - - return SZ_DMAGO; -} - -#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t) - -/* Returns Time-Out */ -static bool _until_dmac_idle(struct pl330_thread *thrd) -{ - void __iomem *regs = thrd->dmac->pinfo->base; - unsigned long loops = msecs_to_loops(5); - - do { - /* Until Manager is Idle */ - if (!(readl(regs + DBGSTATUS) & DBG_BUSY)) - break; - - cpu_relax(); - } while (--loops); - - if (!loops) - return true; - - return false; -} - -static inline void _execute_DBGINSN(struct pl330_thread *thrd, - u8 insn[], bool as_manager) -{ - void __iomem *regs = thrd->dmac->pinfo->base; - u32 val; - - val = (insn[0] << 16) | (insn[1] << 24); - if (!as_manager) { - val |= (1 << 0); - val |= (thrd->id << 8); /* Channel Number */ - } - writel(val, regs + DBGINST0); - - val = *((u32 *)&insn[2]); - writel(val, regs + DBGINST1); - - /* If timed out due to halted state-machine */ - if (_until_dmac_idle(thrd)) { - dev_err(thrd->dmac->pinfo->dev, "DMAC halted!\n"); - return; - } - - /* Get going */ - writel(0, regs + DBGCMD); -} - -/* - * Mark a _pl330_req as free. - * We do it by writing DMAEND as the first instruction - * because no valid request is going to have DMAEND as - * its first instruction to execute. - */ -static void mark_free(struct pl330_thread *thrd, int idx) -{ - struct _pl330_req *req = &thrd->req[idx]; - - _emit_END(0, req->mc_cpu); - req->mc_len = 0; - - thrd->req_running = -1; -} - -static inline u32 _state(struct pl330_thread *thrd) -{ - void __iomem *regs = thrd->dmac->pinfo->base; - u32 val; - - if (is_manager(thrd)) - val = readl(regs + DS) & 0xf; - else - val = readl(regs + CS(thrd->id)) & 0xf; - - switch (val) { - case DS_ST_STOP: - return PL330_STATE_STOPPED; - case DS_ST_EXEC: - return PL330_STATE_EXECUTING; - case DS_ST_CMISS: - return PL330_STATE_CACHEMISS; - case DS_ST_UPDTPC: - return PL330_STATE_UPDTPC; - case DS_ST_WFE: - return PL330_STATE_WFE; - case DS_ST_FAULT: - return PL330_STATE_FAULTING; - case DS_ST_ATBRR: - if (is_manager(thrd)) - return PL330_STATE_INVALID; - else - return PL330_STATE_ATBARRIER; - case DS_ST_QBUSY: - if (is_manager(thrd)) - return PL330_STATE_INVALID; - else - return PL330_STATE_QUEUEBUSY; - case DS_ST_WFP: - if (is_manager(thrd)) - return PL330_STATE_INVALID; - else - return PL330_STATE_WFP; - case DS_ST_KILL: - if (is_manager(thrd)) - return PL330_STATE_INVALID; - else - return PL330_STATE_KILLING; - case DS_ST_CMPLT: - if (is_manager(thrd)) - return PL330_STATE_INVALID; - else - return PL330_STATE_COMPLETING; - case DS_ST_FLTCMP: - if (is_manager(thrd)) - return PL330_STATE_INVALID; - else - return PL330_STATE_FAULT_COMPLETING; - default: - return PL330_STATE_INVALID; - } -} - -static void _stop(struct pl330_thread *thrd) -{ - void __iomem *regs = thrd->dmac->pinfo->base; - u8 insn[6] = {0, 0, 0, 0, 0, 0}; - - if (_state(thrd) == PL330_STATE_FAULT_COMPLETING) - UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING); - - /* Return if nothing needs to be done */ - if (_state(thrd) == PL330_STATE_COMPLETING - || _state(thrd) == PL330_STATE_KILLING - || _state(thrd) == PL330_STATE_STOPPED) - return; - - _emit_KILL(0, insn); - - /* Stop generating interrupts for SEV */ - writel(readl(regs + INTEN) & ~(1 << thrd->ev), regs + INTEN); - - _execute_DBGINSN(thrd, insn, is_manager(thrd)); -} - -/* Start doing req 'idx' of thread 'thrd' */ -static bool _trigger(struct pl330_thread *thrd) -{ - void __iomem *regs = thrd->dmac->pinfo->base; - struct _pl330_req *req; - struct pl330_req *r; - struct _arg_GO go; - unsigned ns; - u8 insn[6] = {0, 0, 0, 0, 0, 0}; - int idx; - - /* Return if already ACTIVE */ - if (_state(thrd) != PL330_STATE_STOPPED) - return true; - - idx = 1 - thrd->lstenq; - if (!IS_FREE(&thrd->req[idx])) - req = &thrd->req[idx]; - else { - idx = thrd->lstenq; - if (!IS_FREE(&thrd->req[idx])) - req = &thrd->req[idx]; - else - req = NULL; - } - - /* Return if no request */ - if (!req || !req->r) - return true; - - r = req->r; - - if (r->cfg) - ns = r->cfg->nonsecure ? 1 : 0; - else if (readl(regs + CS(thrd->id)) & CS_CNS) - ns = 1; - else - ns = 0; - - /* See 'Abort Sources' point-4 at Page 2-25 */ - if (_manager_ns(thrd) && !ns) - dev_info(thrd->dmac->pinfo->dev, "%s:%d Recipe for ABORT!\n", - __func__, __LINE__); - - go.chan = thrd->id; - go.addr = req->mc_bus; - go.ns = ns; - _emit_GO(0, insn, &go); - - /* Set to generate interrupts for SEV */ - writel(readl(regs + INTEN) | (1 << thrd->ev), regs + INTEN); - - /* Only manager can execute GO */ - _execute_DBGINSN(thrd, insn, true); - - thrd->req_running = idx; - - return true; -} - -static bool _start(struct pl330_thread *thrd) -{ - switch (_state(thrd)) { - case PL330_STATE_FAULT_COMPLETING: - UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING); - - if (_state(thrd) == PL330_STATE_KILLING) - UNTIL(thrd, PL330_STATE_STOPPED) - - case PL330_STATE_FAULTING: - _stop(thrd); - - case PL330_STATE_KILLING: - case PL330_STATE_COMPLETING: - UNTIL(thrd, PL330_STATE_STOPPED) - - case PL330_STATE_STOPPED: - return _trigger(thrd); - - case PL330_STATE_WFP: - case PL330_STATE_QUEUEBUSY: - case PL330_STATE_ATBARRIER: - case PL330_STATE_UPDTPC: - case PL330_STATE_CACHEMISS: - case PL330_STATE_EXECUTING: - return true; - - case PL330_STATE_WFE: /* For RESUME, nothing yet */ - default: - return false; - } -} - -static inline int _ldst_memtomem(unsigned dry_run, u8 buf[], - const struct _xfer_spec *pxs, int cyc) -{ - int off = 0; - - while (cyc--) { - off += _emit_LD(dry_run, &buf[off], ALWAYS); - off += _emit_RMB(dry_run, &buf[off]); - off += _emit_ST(dry_run, &buf[off], ALWAYS); - off += _emit_WMB(dry_run, &buf[off]); - } - - return off; -} - -static inline int _ldst_devtomem(unsigned dry_run, u8 buf[], - const struct _xfer_spec *pxs, int cyc) -{ - int off = 0; - - while (cyc--) { - off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->r->peri); - off += _emit_LDP(dry_run, &buf[off], SINGLE, pxs->r->peri); - off += _emit_ST(dry_run, &buf[off], ALWAYS); - off += _emit_FLUSHP(dry_run, &buf[off], pxs->r->peri); - } - - return off; -} - -static inline int _ldst_memtodev(unsigned dry_run, u8 buf[], - const struct _xfer_spec *pxs, int cyc) -{ - int off = 0; - - while (cyc--) { - off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->r->peri); - off += _emit_LD(dry_run, &buf[off], ALWAYS); - off += _emit_STP(dry_run, &buf[off], SINGLE, pxs->r->peri); - off += _emit_FLUSHP(dry_run, &buf[off], pxs->r->peri); - } - - return off; -} - -static int _bursts(unsigned dry_run, u8 buf[], - const struct _xfer_spec *pxs, int cyc) -{ - int off = 0; - - switch (pxs->r->rqtype) { - case MEMTODEV: - off += _ldst_memtodev(dry_run, &buf[off], pxs, cyc); - break; - case DEVTOMEM: - off += _ldst_devtomem(dry_run, &buf[off], pxs, cyc); - break; - case MEMTOMEM: - off += _ldst_memtomem(dry_run, &buf[off], pxs, cyc); - break; - default: - off += 0x40000000; /* Scare off the Client */ - break; - } - - return off; -} - -/* Returns bytes consumed and updates bursts */ -static inline int _loop(unsigned dry_run, u8 buf[], - unsigned long *bursts, const struct _xfer_spec *pxs) -{ - int cyc, cycmax, szlp, szlpend, szbrst, off; - unsigned lcnt0, lcnt1, ljmp0, ljmp1; - struct _arg_LPEND lpend; - - /* Max iterations possible in DMALP is 256 */ - if (*bursts >= 256*256) { - lcnt1 = 256; - lcnt0 = 256; - cyc = *bursts / lcnt1 / lcnt0; - } else if (*bursts > 256) { - lcnt1 = 256; - lcnt0 = *bursts / lcnt1; - cyc = 1; - } else { - lcnt1 = *bursts; - lcnt0 = 0; - cyc = 1; - } - - szlp = _emit_LP(1, buf, 0, 0); - szbrst = _bursts(1, buf, pxs, 1); - - lpend.cond = ALWAYS; - lpend.forever = false; - lpend.loop = 0; - lpend.bjump = 0; - szlpend = _emit_LPEND(1, buf, &lpend); - - if (lcnt0) { - szlp *= 2; - szlpend *= 2; - } - - /* - * Max bursts that we can unroll due to limit on the - * size of backward jump that can be encoded in DMALPEND - * which is 8-bits and hence 255 - */ - cycmax = (255 - (szlp + szlpend)) / szbrst; - - cyc = (cycmax < cyc) ? cycmax : cyc; - - off = 0; - - if (lcnt0) { - off += _emit_LP(dry_run, &buf[off], 0, lcnt0); - ljmp0 = off; - } - - off += _emit_LP(dry_run, &buf[off], 1, lcnt1); - ljmp1 = off; - - off += _bursts(dry_run, &buf[off], pxs, cyc); - - lpend.cond = ALWAYS; - lpend.forever = false; - lpend.loop = 1; - lpend.bjump = off - ljmp1; - off += _emit_LPEND(dry_run, &buf[off], &lpend); - - if (lcnt0) { - lpend.cond = ALWAYS; - lpend.forever = false; - lpend.loop = 0; - lpend.bjump = off - ljmp0; - off += _emit_LPEND(dry_run, &buf[off], &lpend); - } - - *bursts = lcnt1 * cyc; - if (lcnt0) - *bursts *= lcnt0; - - return off; -} - -static inline int _setup_loops(unsigned dry_run, u8 buf[], - const struct _xfer_spec *pxs) -{ - struct pl330_xfer *x = pxs->x; - u32 ccr = pxs->ccr; - unsigned long c, bursts = BYTE_TO_BURST(x->bytes, ccr); - int off = 0; - - while (bursts) { - c = bursts; - off += _loop(dry_run, &buf[off], &c, pxs); - bursts -= c; - } - - return off; -} - -static inline int _setup_xfer(unsigned dry_run, u8 buf[], - const struct _xfer_spec *pxs) -{ - struct pl330_xfer *x = pxs->x; - int off = 0; - - /* DMAMOV SAR, x->src_addr */ - off += _emit_MOV(dry_run, &buf[off], SAR, x->src_addr); - /* DMAMOV DAR, x->dst_addr */ - off += _emit_MOV(dry_run, &buf[off], DAR, x->dst_addr); - - /* Setup Loop(s) */ - off += _setup_loops(dry_run, &buf[off], pxs); - - return off; -} - -/* - * A req is a sequence of one or more xfer units. - * Returns the number of bytes taken to setup the MC for the req. - */ -static int _setup_req(unsigned dry_run, struct pl330_thread *thrd, - unsigned index, struct _xfer_spec *pxs) -{ - struct _pl330_req *req = &thrd->req[index]; - struct pl330_xfer *x; - u8 *buf = req->mc_cpu; - int off = 0; - - PL330_DBGMC_START(req->mc_bus); - - /* DMAMOV CCR, ccr */ - off += _emit_MOV(dry_run, &buf[off], CCR, pxs->ccr); - - x = pxs->r->x; - do { - /* Error if xfer length is not aligned at burst size */ - if (x->bytes % (BRST_SIZE(pxs->ccr) * BRST_LEN(pxs->ccr))) - return -EINVAL; - - pxs->x = x; - off += _setup_xfer(dry_run, &buf[off], pxs); - - x = x->next; - } while (x); - - /* DMASEV peripheral/event */ - off += _emit_SEV(dry_run, &buf[off], thrd->ev); - /* DMAEND */ - off += _emit_END(dry_run, &buf[off]); - - return off; -} - -static inline u32 _prepare_ccr(const struct pl330_reqcfg *rqc) -{ - u32 ccr = 0; - - if (rqc->src_inc) - ccr |= CC_SRCINC; - - if (rqc->dst_inc) - ccr |= CC_DSTINC; - - /* We set same protection levels for Src and DST for now */ - if (rqc->privileged) - ccr |= CC_SRCPRI | CC_DSTPRI; - if (rqc->nonsecure) - ccr |= CC_SRCNS | CC_DSTNS; - if (rqc->insnaccess) - ccr |= CC_SRCIA | CC_DSTIA; - - ccr |= (((rqc->brst_len - 1) & 0xf) << CC_SRCBRSTLEN_SHFT); - ccr |= (((rqc->brst_len - 1) & 0xf) << CC_DSTBRSTLEN_SHFT); - - ccr |= (rqc->brst_size << CC_SRCBRSTSIZE_SHFT); - ccr |= (rqc->brst_size << CC_DSTBRSTSIZE_SHFT); - - ccr |= (rqc->scctl << CC_SRCCCTRL_SHFT); - ccr |= (rqc->dcctl << CC_DSTCCTRL_SHFT); - - ccr |= (rqc->swap << CC_SWAP_SHFT); - - return ccr; -} - -static inline bool _is_valid(u32 ccr) -{ - enum pl330_dstcachectrl dcctl; - enum pl330_srccachectrl scctl; - - dcctl = (ccr >> CC_DSTCCTRL_SHFT) & CC_DRCCCTRL_MASK; - scctl = (ccr >> CC_SRCCCTRL_SHFT) & CC_SRCCCTRL_MASK; - - if (dcctl == DINVALID1 || dcctl == DINVALID2 - || scctl == SINVALID1 || scctl == SINVALID2) - return false; - else - return true; -} - -/* - * Submit a list of xfers after which the client wants notification. - * Client is not notified after each xfer unit, just once after all - * xfer units are done or some error occurs. - */ -int pl330_submit_req(void *ch_id, struct pl330_req *r) -{ - struct pl330_thread *thrd = ch_id; - struct pl330_dmac *pl330; - struct pl330_info *pi; - struct _xfer_spec xs; - unsigned long flags; - void __iomem *regs; - unsigned idx; - u32 ccr; - int ret = 0; - - /* No Req or Unacquired Channel or DMAC */ - if (!r || !thrd || thrd->free) - return -EINVAL; - - pl330 = thrd->dmac; - pi = pl330->pinfo; - regs = pi->base; - - if (pl330->state == DYING - || pl330->dmac_tbd.reset_chan & (1 << thrd->id)) { - dev_info(thrd->dmac->pinfo->dev, "%s:%d\n", - __func__, __LINE__); - return -EAGAIN; - } - - /* If request for non-existing peripheral */ - if (r->rqtype != MEMTOMEM && r->peri >= pi->pcfg.num_peri) { - dev_info(thrd->dmac->pinfo->dev, - "%s:%d Invalid peripheral(%u)!\n", - __func__, __LINE__, r->peri); - return -EINVAL; - } - - spin_lock_irqsave(&pl330->lock, flags); - - if (_queue_full(thrd)) { - ret = -EAGAIN; - goto xfer_exit; - } - - /* Prefer Secure Channel */ - if (!_manager_ns(thrd)) - r->cfg->nonsecure = 0; - else - r->cfg->nonsecure = 1; - - /* Use last settings, if not provided */ - if (r->cfg) - ccr = _prepare_ccr(r->cfg); - else - ccr = readl(regs + CC(thrd->id)); - - /* If this req doesn't have valid xfer settings */ - if (!_is_valid(ccr)) { - ret = -EINVAL; - dev_info(thrd->dmac->pinfo->dev, "%s:%d Invalid CCR(%x)!\n", - __func__, __LINE__, ccr); - goto xfer_exit; - } - - idx = IS_FREE(&thrd->req[0]) ? 0 : 1; - - xs.ccr = ccr; - xs.r = r; - - /* First dry run to check if req is acceptable */ - ret = _setup_req(1, thrd, idx, &xs); - if (ret < 0) - goto xfer_exit; - - if (ret > pi->mcbufsz / 2) { - dev_info(thrd->dmac->pinfo->dev, - "%s:%d Trying increasing mcbufsz\n", - __func__, __LINE__); - ret = -ENOMEM; - goto xfer_exit; - } - - /* Hook the request */ - thrd->lstenq = idx; - thrd->req[idx].mc_len = _setup_req(0, thrd, idx, &xs); - thrd->req[idx].r = r; - - ret = 0; - -xfer_exit: - spin_unlock_irqrestore(&pl330->lock, flags); - - return ret; -} -EXPORT_SYMBOL(pl330_submit_req); - -static void pl330_dotask(unsigned long data) -{ - struct pl330_dmac *pl330 = (struct pl330_dmac *) data; - struct pl330_info *pi = pl330->pinfo; - unsigned long flags; - int i; - - spin_lock_irqsave(&pl330->lock, flags); - - /* The DMAC itself gone nuts */ - if (pl330->dmac_tbd.reset_dmac) { - pl330->state = DYING; - /* Reset the manager too */ - pl330->dmac_tbd.reset_mngr = true; - /* Clear the reset flag */ - pl330->dmac_tbd.reset_dmac = false; - } - - if (pl330->dmac_tbd.reset_mngr) { - _stop(pl330->manager); - /* Reset all channels */ - pl330->dmac_tbd.reset_chan = (1 << pi->pcfg.num_chan) - 1; - /* Clear the reset flag */ - pl330->dmac_tbd.reset_mngr = false; - } - - for (i = 0; i < pi->pcfg.num_chan; i++) { - - if (pl330->dmac_tbd.reset_chan & (1 << i)) { - struct pl330_thread *thrd = &pl330->channels[i]; - void __iomem *regs = pi->base; - enum pl330_op_err err; - - _stop(thrd); - - if (readl(regs + FSC) & (1 << thrd->id)) - err = PL330_ERR_FAIL; - else - err = PL330_ERR_ABORT; - - spin_unlock_irqrestore(&pl330->lock, flags); - - _callback(thrd->req[1 - thrd->lstenq].r, err); - _callback(thrd->req[thrd->lstenq].r, err); - - spin_lock_irqsave(&pl330->lock, flags); - - thrd->req[0].r = NULL; - thrd->req[1].r = NULL; - mark_free(thrd, 0); - mark_free(thrd, 1); - - /* Clear the reset flag */ - pl330->dmac_tbd.reset_chan &= ~(1 << i); - } - } - - spin_unlock_irqrestore(&pl330->lock, flags); - - return; -} - -/* Returns 1 if state was updated, 0 otherwise */ -int pl330_update(const struct pl330_info *pi) -{ - struct _pl330_req *rqdone; - struct pl330_dmac *pl330; - unsigned long flags; - void __iomem *regs; - u32 val; - int id, ev, ret = 0; - - if (!pi || !pi->pl330_data) - return 0; - - regs = pi->base; - pl330 = pi->pl330_data; - - spin_lock_irqsave(&pl330->lock, flags); - - val = readl(regs + FSM) & 0x1; - if (val) - pl330->dmac_tbd.reset_mngr = true; - else - pl330->dmac_tbd.reset_mngr = false; - - val = readl(regs + FSC) & ((1 << pi->pcfg.num_chan) - 1); - pl330->dmac_tbd.reset_chan |= val; - if (val) { - int i = 0; - while (i < pi->pcfg.num_chan) { - if (val & (1 << i)) { - dev_info(pi->dev, - "Reset Channel-%d\t CS-%x FTC-%x\n", - i, readl(regs + CS(i)), - readl(regs + FTC(i))); - _stop(&pl330->channels[i]); - } - i++; - } - } - - /* Check which event happened i.e, thread notified */ - val = readl(regs + ES); - if (pi->pcfg.num_events < 32 - && val & ~((1 << pi->pcfg.num_events) - 1)) { - pl330->dmac_tbd.reset_dmac = true; - dev_err(pi->dev, "%s:%d Unexpected!\n", __func__, __LINE__); - ret = 1; - goto updt_exit; - } - - for (ev = 0; ev < pi->pcfg.num_events; ev++) { - if (val & (1 << ev)) { /* Event occurred */ - struct pl330_thread *thrd; - u32 inten = readl(regs + INTEN); - int active; - - /* Clear the event */ - if (inten & (1 << ev)) - writel(1 << ev, regs + INTCLR); - - ret = 1; - - id = pl330->events[ev]; - - thrd = &pl330->channels[id]; - - active = thrd->req_running; - if (active == -1) /* Aborted */ - continue; - - rqdone = &thrd->req[active]; - mark_free(thrd, active); - - /* Get going again ASAP */ - _start(thrd); - - /* For now, just make a list of callbacks to be done */ - list_add_tail(&rqdone->rqd, &pl330->req_done); - } - } - - /* Now that we are in no hurry, do the callbacks */ - while (!list_empty(&pl330->req_done)) { - struct pl330_req *r; - - rqdone = container_of(pl330->req_done.next, - struct _pl330_req, rqd); - - list_del_init(&rqdone->rqd); - - /* Detach the req */ - r = rqdone->r; - rqdone->r = NULL; - - spin_unlock_irqrestore(&pl330->lock, flags); - _callback(r, PL330_ERR_NONE); - spin_lock_irqsave(&pl330->lock, flags); - } - -updt_exit: - spin_unlock_irqrestore(&pl330->lock, flags); - - if (pl330->dmac_tbd.reset_dmac - || pl330->dmac_tbd.reset_mngr - || pl330->dmac_tbd.reset_chan) { - ret = 1; - tasklet_schedule(&pl330->tasks); - } - - return ret; -} -EXPORT_SYMBOL(pl330_update); - -int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op) -{ - struct pl330_thread *thrd = ch_id; - struct pl330_dmac *pl330; - unsigned long flags; - int ret = 0, active = thrd->req_running; - - if (!thrd || thrd->free || thrd->dmac->state == DYING) - return -EINVAL; - - pl330 = thrd->dmac; - - spin_lock_irqsave(&pl330->lock, flags); - - switch (op) { - case PL330_OP_FLUSH: - /* Make sure the channel is stopped */ - _stop(thrd); - - thrd->req[0].r = NULL; - thrd->req[1].r = NULL; - mark_free(thrd, 0); - mark_free(thrd, 1); - break; - - case PL330_OP_ABORT: - /* Make sure the channel is stopped */ - _stop(thrd); - - /* ABORT is only for the active req */ - if (active == -1) - break; - - thrd->req[active].r = NULL; - mark_free(thrd, active); - - /* Start the next */ - case PL330_OP_START: - if ((active == -1) && !_start(thrd)) - ret = -EIO; - break; - - default: - ret = -EINVAL; - } - - spin_unlock_irqrestore(&pl330->lock, flags); - return ret; -} -EXPORT_SYMBOL(pl330_chan_ctrl); - -int pl330_chan_status(void *ch_id, struct pl330_chanstatus *pstatus) -{ - struct pl330_thread *thrd = ch_id; - struct pl330_dmac *pl330; - struct pl330_info *pi; - void __iomem *regs; - int active; - u32 val; - - if (!pstatus || !thrd || thrd->free) - return -EINVAL; - - pl330 = thrd->dmac; - pi = pl330->pinfo; - regs = pi->base; - - /* The client should remove the DMAC and add again */ - if (pl330->state == DYING) - pstatus->dmac_halted = true; - else - pstatus->dmac_halted = false; - - val = readl(regs + FSC); - if (val & (1 << thrd->id)) - pstatus->faulting = true; - else - pstatus->faulting = false; - - active = thrd->req_running; - - if (active == -1) { - /* Indicate that the thread is not running */ - pstatus->top_req = NULL; - pstatus->wait_req = NULL; - } else { - pstatus->top_req = thrd->req[active].r; - pstatus->wait_req = !IS_FREE(&thrd->req[1 - active]) - ? thrd->req[1 - active].r : NULL; - } - - pstatus->src_addr = readl(regs + SA(thrd->id)); - pstatus->dst_addr = readl(regs + DA(thrd->id)); - - return 0; -} -EXPORT_SYMBOL(pl330_chan_status); - -/* Reserve an event */ -static inline int _alloc_event(struct pl330_thread *thrd) -{ - struct pl330_dmac *pl330 = thrd->dmac; - struct pl330_info *pi = pl330->pinfo; - int ev; - - for (ev = 0; ev < pi->pcfg.num_events; ev++) - if (pl330->events[ev] == -1) { - pl330->events[ev] = thrd->id; - return ev; - } - - return -1; -} - -static bool _chan_ns(const struct pl330_info *pi, int i) -{ - return pi->pcfg.irq_ns & (1 << i); -} - -/* Upon success, returns IdentityToken for the - * allocated channel, NULL otherwise. - */ -void *pl330_request_channel(const struct pl330_info *pi) -{ - struct pl330_thread *thrd = NULL; - struct pl330_dmac *pl330; - unsigned long flags; - int chans, i; - - if (!pi || !pi->pl330_data) - return NULL; - - pl330 = pi->pl330_data; - - if (pl330->state == DYING) - return NULL; - - chans = pi->pcfg.num_chan; - - spin_lock_irqsave(&pl330->lock, flags); - - for (i = 0; i < chans; i++) { - thrd = &pl330->channels[i]; - if ((thrd->free) && (!_manager_ns(thrd) || - _chan_ns(pi, i))) { - thrd->ev = _alloc_event(thrd); - if (thrd->ev >= 0) { - thrd->free = false; - thrd->lstenq = 1; - thrd->req[0].r = NULL; - mark_free(thrd, 0); - thrd->req[1].r = NULL; - mark_free(thrd, 1); - break; - } - } - thrd = NULL; - } - - spin_unlock_irqrestore(&pl330->lock, flags); - - return thrd; -} -EXPORT_SYMBOL(pl330_request_channel); - -/* Release an event */ -static inline void _free_event(struct pl330_thread *thrd, int ev) -{ - struct pl330_dmac *pl330 = thrd->dmac; - struct pl330_info *pi = pl330->pinfo; - - /* If the event is valid and was held by the thread */ - if (ev >= 0 && ev < pi->pcfg.num_events - && pl330->events[ev] == thrd->id) - pl330->events[ev] = -1; -} - -void pl330_release_channel(void *ch_id) -{ - struct pl330_thread *thrd = ch_id; - struct pl330_dmac *pl330; - unsigned long flags; - - if (!thrd || thrd->free) - return; - - _stop(thrd); - - _callback(thrd->req[1 - thrd->lstenq].r, PL330_ERR_ABORT); - _callback(thrd->req[thrd->lstenq].r, PL330_ERR_ABORT); - - pl330 = thrd->dmac; - - spin_lock_irqsave(&pl330->lock, flags); - _free_event(thrd, thrd->ev); - thrd->free = true; - spin_unlock_irqrestore(&pl330->lock, flags); -} -EXPORT_SYMBOL(pl330_release_channel); - -/* Initialize the structure for PL330 configuration, that can be used - * by the client driver the make best use of the DMAC - */ -static void read_dmac_config(struct pl330_info *pi) -{ - void __iomem *regs = pi->base; - u32 val; - - val = readl(regs + CRD) >> CRD_DATA_WIDTH_SHIFT; - val &= CRD_DATA_WIDTH_MASK; - pi->pcfg.data_bus_width = 8 * (1 << val); - - val = readl(regs + CRD) >> CRD_DATA_BUFF_SHIFT; - val &= CRD_DATA_BUFF_MASK; - pi->pcfg.data_buf_dep = val + 1; - - val = readl(regs + CR0) >> CR0_NUM_CHANS_SHIFT; - val &= CR0_NUM_CHANS_MASK; - val += 1; - pi->pcfg.num_chan = val; - - val = readl(regs + CR0); - if (val & CR0_PERIPH_REQ_SET) { - val = (val >> CR0_NUM_PERIPH_SHIFT) & CR0_NUM_PERIPH_MASK; - val += 1; - pi->pcfg.num_peri = val; - pi->pcfg.peri_ns = readl(regs + CR4); - } else { - pi->pcfg.num_peri = 0; - } - - val = readl(regs + CR0); - if (val & CR0_BOOT_MAN_NS) - pi->pcfg.mode |= DMAC_MODE_NS; - else - pi->pcfg.mode &= ~DMAC_MODE_NS; - - val = readl(regs + CR0) >> CR0_NUM_EVENTS_SHIFT; - val &= CR0_NUM_EVENTS_MASK; - val += 1; - pi->pcfg.num_events = val; - - pi->pcfg.irq_ns = readl(regs + CR3); - - pi->pcfg.periph_id = get_id(pi, PERIPH_ID); - pi->pcfg.pcell_id = get_id(pi, PCELL_ID); -} - -static inline void _reset_thread(struct pl330_thread *thrd) -{ - struct pl330_dmac *pl330 = thrd->dmac; - struct pl330_info *pi = pl330->pinfo; - - thrd->req[0].mc_cpu = pl330->mcode_cpu - + (thrd->id * pi->mcbufsz); - thrd->req[0].mc_bus = pl330->mcode_bus - + (thrd->id * pi->mcbufsz); - thrd->req[0].r = NULL; - mark_free(thrd, 0); - - thrd->req[1].mc_cpu = thrd->req[0].mc_cpu - + pi->mcbufsz / 2; - thrd->req[1].mc_bus = thrd->req[0].mc_bus - + pi->mcbufsz / 2; - thrd->req[1].r = NULL; - mark_free(thrd, 1); -} - -static int dmac_alloc_threads(struct pl330_dmac *pl330) -{ - struct pl330_info *pi = pl330->pinfo; - int chans = pi->pcfg.num_chan; - struct pl330_thread *thrd; - int i; - - /* Allocate 1 Manager and 'chans' Channel threads */ - pl330->channels = kzalloc((1 + chans) * sizeof(*thrd), - GFP_KERNEL); - if (!pl330->channels) - return -ENOMEM; - - /* Init Channel threads */ - for (i = 0; i < chans; i++) { - thrd = &pl330->channels[i]; - thrd->id = i; - thrd->dmac = pl330; - _reset_thread(thrd); - thrd->free = true; - } - - /* MANAGER is indexed at the end */ - thrd = &pl330->channels[chans]; - thrd->id = chans; - thrd->dmac = pl330; - thrd->free = false; - pl330->manager = thrd; - - return 0; -} - -static int dmac_alloc_resources(struct pl330_dmac *pl330) -{ - struct pl330_info *pi = pl330->pinfo; - int chans = pi->pcfg.num_chan; - int ret; - - /* - * Alloc MicroCode buffer for 'chans' Channel threads. - * A channel's buffer offset is (Channel_Id * MCODE_BUFF_PERCHAN) - */ - pl330->mcode_cpu = dma_alloc_coherent(pi->dev, - chans * pi->mcbufsz, - &pl330->mcode_bus, GFP_KERNEL); - if (!pl330->mcode_cpu) { - dev_err(pi->dev, "%s:%d Can't allocate memory!\n", - __func__, __LINE__); - return -ENOMEM; - } - - ret = dmac_alloc_threads(pl330); - if (ret) { - dev_err(pi->dev, "%s:%d Can't to create channels for DMAC!\n", - __func__, __LINE__); - dma_free_coherent(pi->dev, - chans * pi->mcbufsz, - pl330->mcode_cpu, pl330->mcode_bus); - return ret; - } - - return 0; -} - -int pl330_add(struct pl330_info *pi) -{ - struct pl330_dmac *pl330; - void __iomem *regs; - int i, ret; - - if (!pi || !pi->dev) - return -EINVAL; - - /* If already added */ - if (pi->pl330_data) - return -EINVAL; - - /* - * If the SoC can perform reset on the DMAC, then do it - * before reading its configuration. - */ - if (pi->dmac_reset) - pi->dmac_reset(pi); - - regs = pi->base; - - /* Check if we can handle this DMAC */ - if ((get_id(pi, PERIPH_ID) & 0xfffff) != PERIPH_ID_VAL - || get_id(pi, PCELL_ID) != PCELL_ID_VAL) { - dev_err(pi->dev, "PERIPH_ID 0x%x, PCELL_ID 0x%x !\n", - get_id(pi, PERIPH_ID), get_id(pi, PCELL_ID)); - return -EINVAL; - } - - /* Read the configuration of the DMAC */ - read_dmac_config(pi); - - if (pi->pcfg.num_events == 0) { - dev_err(pi->dev, "%s:%d Can't work without events!\n", - __func__, __LINE__); - return -EINVAL; - } - - pl330 = kzalloc(sizeof(*pl330), GFP_KERNEL); - if (!pl330) { - dev_err(pi->dev, "%s:%d Can't allocate memory!\n", - __func__, __LINE__); - return -ENOMEM; - } - - /* Assign the info structure and private data */ - pl330->pinfo = pi; - pi->pl330_data = pl330; - - spin_lock_init(&pl330->lock); - - INIT_LIST_HEAD(&pl330->req_done); - - /* Use default MC buffer size if not provided */ - if (!pi->mcbufsz) - pi->mcbufsz = MCODE_BUFF_PER_REQ * 2; - - /* Mark all events as free */ - for (i = 0; i < pi->pcfg.num_events; i++) - pl330->events[i] = -1; - - /* Allocate resources needed by the DMAC */ - ret = dmac_alloc_resources(pl330); - if (ret) { - dev_err(pi->dev, "Unable to create channels for DMAC\n"); - kfree(pl330); - return ret; - } - - tasklet_init(&pl330->tasks, pl330_dotask, (unsigned long) pl330); - - pl330->state = INIT; - - return 0; -} -EXPORT_SYMBOL(pl330_add); - -static int dmac_free_threads(struct pl330_dmac *pl330) -{ - struct pl330_info *pi = pl330->pinfo; - int chans = pi->pcfg.num_chan; - struct pl330_thread *thrd; - int i; - - /* Release Channel threads */ - for (i = 0; i < chans; i++) { - thrd = &pl330->channels[i]; - pl330_release_channel((void *)thrd); - } - - /* Free memory */ - kfree(pl330->channels); - - return 0; -} - -static void dmac_free_resources(struct pl330_dmac *pl330) -{ - struct pl330_info *pi = pl330->pinfo; - int chans = pi->pcfg.num_chan; - - dmac_free_threads(pl330); - - dma_free_coherent(pi->dev, chans * pi->mcbufsz, - pl330->mcode_cpu, pl330->mcode_bus); -} - -void pl330_del(struct pl330_info *pi) -{ - struct pl330_dmac *pl330; - - if (!pi || !pi->pl330_data) - return; - - pl330 = pi->pl330_data; - - pl330->state = UNINIT; - - tasklet_kill(&pl330->tasks); - - /* Free DMAC resources */ - dmac_free_resources(pl330); - - kfree(pl330); - pi->pl330_data = NULL; -} -EXPORT_SYMBOL(pl330_del); diff --git a/arch/arm/include/asm/hardware/pl330.h b/arch/arm/include/asm/hardware/pl330.h deleted file mode 100644 index 575fa81..0000000 --- a/arch/arm/include/asm/hardware/pl330.h +++ /dev/null @@ -1,217 +0,0 @@ -/* linux/include/asm/hardware/pl330.h - * - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __PL330_CORE_H -#define __PL330_CORE_H - -#define PL330_MAX_CHAN 8 -#define PL330_MAX_IRQS 32 -#define PL330_MAX_PERI 32 - -enum pl330_srccachectrl { - SCCTRL0 = 0, /* Noncacheable and nonbufferable */ - SCCTRL1, /* Bufferable only */ - SCCTRL2, /* Cacheable, but do not allocate */ - SCCTRL3, /* Cacheable and bufferable, but do not allocate */ - SINVALID1, - SINVALID2, - SCCTRL6, /* Cacheable write-through, allocate on reads only */ - SCCTRL7, /* Cacheable write-back, allocate on reads only */ -}; - -enum pl330_dstcachectrl { - DCCTRL0 = 0, /* Noncacheable and nonbufferable */ - DCCTRL1, /* Bufferable only */ - DCCTRL2, /* Cacheable, but do not allocate */ - DCCTRL3, /* Cacheable and bufferable, but do not allocate */ - DINVALID1 = 8, - DINVALID2, - DCCTRL6, /* Cacheable write-through, allocate on writes only */ - DCCTRL7, /* Cacheable write-back, allocate on writes only */ -}; - -/* Populated by the PL330 core driver for DMA API driver's info */ -struct pl330_config { - u32 periph_id; - u32 pcell_id; -#define DMAC_MODE_NS (1 << 0) - unsigned int mode; - unsigned int data_bus_width:10; /* In number of bits */ - unsigned int data_buf_dep:10; - unsigned int num_chan:4; - unsigned int num_peri:6; - u32 peri_ns; - unsigned int num_events:6; - u32 irq_ns; -}; - -/* Handle to the DMAC provided to the PL330 core */ -struct pl330_info { - /* Owning device */ - struct device *dev; - /* Size of MicroCode buffers for each channel. */ - unsigned mcbufsz; - /* ioremap'ed address of PL330 registers. */ - void __iomem *base; - /* Client can freely use it. */ - void *client_data; - /* PL330 core data, Client must not touch it. */ - void *pl330_data; - /* Populated by the PL330 core driver during pl330_add */ - struct pl330_config pcfg; - /* - * If the DMAC has some reset mechanism, then the - * client may want to provide pointer to the method. - */ - void (*dmac_reset)(struct pl330_info *pi); -}; - -enum pl330_byteswap { - SWAP_NO = 0, - SWAP_2, - SWAP_4, - SWAP_8, - SWAP_16, -}; - -/** - * Request Configuration. - * The PL330 core does not modify this and uses the last - * working configuration if the request doesn't provide any. - * - * The Client may want to provide this info only for the - * first request and a request with new settings. - */ -struct pl330_reqcfg { - /* Address Incrementing */ - unsigned dst_inc:1; - unsigned src_inc:1; - - /* - * For now, the SRC & DST protection levels - * and burst size/length are assumed same. - */ - bool nonsecure; - bool privileged; - bool insnaccess; - unsigned brst_len:5; - unsigned brst_size:3; /* in power of 2 */ - - enum pl330_dstcachectrl dcctl; - enum pl330_srccachectrl scctl; - enum pl330_byteswap swap; -}; - -/* - * One cycle of DMAC operation. - * There may be more than one xfer in a request. - */ -struct pl330_xfer { - u32 src_addr; - u32 dst_addr; - /* Size to xfer */ - u32 bytes; - /* - * Pointer to next xfer in the list. - * The last xfer in the req must point to NULL. - */ - struct pl330_xfer *next; -}; - -/* The xfer callbacks are made with one of these arguments. */ -enum pl330_op_err { - /* The all xfers in the request were success. */ - PL330_ERR_NONE, - /* If req aborted due to global error. */ - PL330_ERR_ABORT, - /* If req failed due to problem with Channel. */ - PL330_ERR_FAIL, -}; - -enum pl330_reqtype { - MEMTOMEM, - MEMTODEV, - DEVTOMEM, - DEVTODEV, -}; - -/* A request defining Scatter-Gather List ending with NULL xfer. */ -struct pl330_req { - enum pl330_reqtype rqtype; - /* Index of peripheral for the xfer. */ - unsigned peri:5; - /* Unique token for this xfer, set by the client. */ - void *token; - /* Callback to be called after xfer. */ - void (*xfer_cb)(void *token, enum pl330_op_err err); - /* If NULL, req will be done at last set parameters. */ - struct pl330_reqcfg *cfg; - /* Pointer to first xfer in the request. */ - struct pl330_xfer *x; -}; - -/* - * To know the status of the channel and DMAC, the client - * provides a pointer to this structure. The PL330 core - * fills it with current information. - */ -struct pl330_chanstatus { - /* - * If the DMAC engine halted due to some error, - * the client should remove-add DMAC. - */ - bool dmac_halted; - /* - * If channel is halted due to some error, - * the client should ABORT/FLUSH and START the channel. - */ - bool faulting; - /* Location of last load */ - u32 src_addr; - /* Location of last store */ - u32 dst_addr; - /* - * Pointer to the currently active req, NULL if channel is - * inactive, even though the requests may be present. - */ - struct pl330_req *top_req; - /* Pointer to req waiting second in the queue if any. */ - struct pl330_req *wait_req; -}; - -enum pl330_chan_op { - /* Start the channel */ - PL330_OP_START, - /* Abort the active xfer */ - PL330_OP_ABORT, - /* Stop xfer and flush queue */ - PL330_OP_FLUSH, -}; - -extern int pl330_add(struct pl330_info *); -extern void pl330_del(struct pl330_info *pi); -extern int pl330_update(const struct pl330_info *pi); -extern void pl330_release_channel(void *ch_id); -extern void *pl330_request_channel(const struct pl330_info *pi); -extern int pl330_chan_status(void *ch_id, struct pl330_chanstatus *pstatus); -extern int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op); -extern int pl330_submit_req(void *ch_id, struct pl330_req *r); - -#endif /* __PL330_CORE_H */ -- cgit v1.1 From 4d4e58de32a192fea65ab84509d17d199bd291c8 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Tue, 6 Mar 2012 22:34:06 +0000 Subject: dmaengine: move last completed cookie into generic dma_chan structure Every DMA engine implementation declares a last completed dma cookie in their private dma channel structures. This is pointless, and forces driver specific code. Move this out into the common dma_chan structure. Signed-off-by: Russell King Tested-by: Linus Walleij Reviewed-by: Linus Walleij Acked-by: Jassi Brar [imx-sdma.c & mxs-dma.c] Tested-by: Shawn Guo Signed-off-by: Vinod Koul --- arch/arm/include/asm/hardware/iop_adma.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/include/asm/hardware/iop_adma.h b/arch/arm/include/asm/hardware/iop_adma.h index 59b8c38..122f86d 100644 --- a/arch/arm/include/asm/hardware/iop_adma.h +++ b/arch/arm/include/asm/hardware/iop_adma.h @@ -49,7 +49,6 @@ struct iop_adma_device { /** * struct iop_adma_chan - internal representation of an ADMA device * @pending: allows batching of hardware operations - * @completed_cookie: identifier for the most recently completed operation * @lock: serializes enqueue/dequeue operations to the slot pool * @mmr_base: memory mapped register base * @chain: device chain view of the descriptors @@ -62,7 +61,6 @@ struct iop_adma_device { */ struct iop_adma_chan { int pending; - dma_cookie_t completed_cookie; spinlock_t lock; /* protects the descriptor slot pool */ void __iomem *mmr_base; struct list_head chain; -- cgit v1.1 From 16052827d98fbc13c31ebad560af4bd53e2b4dd5 Mon Sep 17 00:00:00 2001 From: Alexandre Bounine Date: Thu, 8 Mar 2012 16:11:18 -0500 Subject: dmaengine/dma_slave: introduce inline wrappers Add inline wrappers for device_prep_slave_sg() and device_prep_dma_cyclic() interfaces to hide new parameter from current users of affected interfaces. Convert current users to use new wrappers instead of direct calls. Suggested by Russell King [https://lkml.org/lkml/2012/2/3/269]. Signed-off-by: Alexandre Bounine Signed-off-by: Vinod Koul --- arch/arm/plat-nomadik/include/plat/ste_dma40.h | 3 +-- arch/arm/plat-samsung/dma-ops.c | 4 ++-- 2 files changed, 3 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-nomadik/include/plat/ste_dma40.h b/arch/arm/plat-nomadik/include/plat/ste_dma40.h index fd0ee84..9ff93b0 100644 --- a/arch/arm/plat-nomadik/include/plat/ste_dma40.h +++ b/arch/arm/plat-nomadik/include/plat/ste_dma40.h @@ -200,8 +200,7 @@ dma_async_tx_descriptor *stedma40_slave_mem(struct dma_chan *chan, sg.dma_address = addr; sg.length = size; - return chan->device->device_prep_slave_sg(chan, &sg, 1, - direction, flags); + return dmaengine_prep_slave_sg(chan, &sg, 1, direction, flags); } #else diff --git a/arch/arm/plat-samsung/dma-ops.c b/arch/arm/plat-samsung/dma-ops.c index 0747c77..a6ef396 100644 --- a/arch/arm/plat-samsung/dma-ops.c +++ b/arch/arm/plat-samsung/dma-ops.c @@ -79,11 +79,11 @@ static int samsung_dmadev_prepare(unsigned ch, info->len, offset_in_page(info->buf)); sg_dma_address(&sg) = info->buf; - desc = chan->device->device_prep_slave_sg(chan, + desc = dmaengine_prep_slave_sg(chan, &sg, 1, info->direction, DMA_PREP_INTERRUPT); break; case DMA_CYCLIC: - desc = chan->device->device_prep_dma_cyclic(chan, + desc = dmaengine_prep_dma_cyclic(chan, info->buf, info->len, info->period, info->direction); break; default: -- cgit v1.1 From beeaa103eecc7a132682c40867f0ef70655383a5 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Wed, 14 Mar 2012 12:41:43 +0100 Subject: dmaengine: at_hdmac: add slave config operation This patch introduces DMA_SLAVE_CONFIG to at_hdmac Atmel DMA driver. It is needed to fix a regression in the use of atmel-mci.c driver on Atmel AT91 platforms brouth by e2b35f3: "dmaengine/dw_dmac: Fix dw_dmac user drivers to adapt to slave_config changes" We remove some parts of the private structure "at_dma_slave" and use the information provided by "struct dma_slave_config": source/destination peripheral registers and access width. AT_DMA_SLAVE_WIDTH_* values used previously are not needed anymore as we now use the standard ones. Although some conversion functions are needed to match register expected values. Some AT91 sub-architecture specific files are slightly touched by this patch but it cannot be split because it can break compilation. Signed-off-by: Nicolas Ferre Signed-off-by: Vinod Koul --- arch/arm/mach-at91/at91sam9g45_devices.c | 1 - arch/arm/mach-at91/include/mach/at_hdmac.h | 15 --------------- 2 files changed, 16 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index b7582dd..1f89b20 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -431,7 +431,6 @@ void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) /* DMA slave channel configuration */ atslave->dma_dev = &at_hdmac_device.dev; - atslave->reg_width = AT_DMA_SLAVE_WIDTH_32BIT; atslave->cfg = ATC_FIFOCFG_HALFFIFO | ATC_SRC_H2SEL_HW | ATC_DST_H2SEL_HW; atslave->ctrla = ATC_SCSIZE_16 | ATC_DCSIZE_16; diff --git a/arch/arm/mach-at91/include/mach/at_hdmac.h b/arch/arm/mach-at91/include/mach/at_hdmac.h index 187cb58..fff48d1 100644 --- a/arch/arm/mach-at91/include/mach/at_hdmac.h +++ b/arch/arm/mach-at91/include/mach/at_hdmac.h @@ -24,18 +24,6 @@ struct at_dma_platform_data { }; /** - * enum at_dma_slave_width - DMA slave register access width. - * @AT_DMA_SLAVE_WIDTH_8BIT: Do 8-bit slave register accesses - * @AT_DMA_SLAVE_WIDTH_16BIT: Do 16-bit slave register accesses - * @AT_DMA_SLAVE_WIDTH_32BIT: Do 32-bit slave register accesses - */ -enum at_dma_slave_width { - AT_DMA_SLAVE_WIDTH_8BIT = 0, - AT_DMA_SLAVE_WIDTH_16BIT, - AT_DMA_SLAVE_WIDTH_32BIT, -}; - -/** * struct at_dma_slave - Controller-specific information about a slave * @dma_dev: required DMA master device * @tx_reg: physical address of data register used for @@ -48,9 +36,6 @@ enum at_dma_slave_width { */ struct at_dma_slave { struct device *dma_dev; - dma_addr_t tx_reg; - dma_addr_t rx_reg; - enum at_dma_slave_width reg_width; u32 cfg; u32 ctrla; }; -- cgit v1.1 From 6bd081277ea03e2b165fc68534b61bc64db93990 Mon Sep 17 00:00:00 2001 From: Javier Martin Date: Thu, 22 Mar 2012 14:54:01 +0100 Subject: dmaengine: imx-dma: merge old dma-v1.c with imx-dma.c It is mainly a simple merge changing the prefix of some functions to fit the imx-dma namings. As there are no users of the old dma-v1.c api we can safely remove this file. Signed-off-by: Javier Martin Acked-by: Sascha Hauer Signed-off-by: Vinod Koul --- arch/arm/mach-imx/Kconfig | 6 - arch/arm/mach-imx/Makefile | 2 - arch/arm/mach-imx/dma-v1.c | 846 -------------------------------- arch/arm/mach-imx/include/mach/dma-v1.h | 103 ---- 4 files changed, 957 deletions(-) delete mode 100644 arch/arm/mach-imx/dma-v1.c delete mode 100644 arch/arm/mach-imx/include/mach/dma-v1.h (limited to 'arch') diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 0e6de36..3da1421 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -1,6 +1,3 @@ -config IMX_HAVE_DMA_V1 - bool - config HAVE_IMX_GPC bool @@ -26,7 +23,6 @@ config SOC_IMX1 bool select ARCH_MX1 select CPU_ARM920T - select IMX_HAVE_DMA_V1 select IMX_HAVE_IOMUX_V1 select MXC_AVIC @@ -35,7 +31,6 @@ config SOC_IMX21 select MACH_MX21 select CPU_ARM926T select ARCH_MXC_AUDMUX_V1 - select IMX_HAVE_DMA_V1 select IMX_HAVE_IOMUX_V1 select MXC_AVIC @@ -52,7 +47,6 @@ config SOC_IMX27 select MACH_MX27 select CPU_ARM926T select ARCH_MXC_AUDMUX_V1 - select IMX_HAVE_DMA_V1 select IMX_HAVE_IOMUX_V1 select MXC_AVIC diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index f5920c2..a62dc3a 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -1,5 +1,3 @@ -obj-$(CONFIG_IMX_HAVE_DMA_V1) += dma-v1.o - obj-$(CONFIG_SOC_IMX1) += clock-imx1.o mm-imx1.o obj-$(CONFIG_SOC_IMX21) += clock-imx21.o mm-imx21.o diff --git a/arch/arm/mach-imx/dma-v1.c b/arch/arm/mach-imx/dma-v1.c deleted file mode 100644 index 42afc29..0000000 --- a/arch/arm/mach-imx/dma-v1.c +++ /dev/null @@ -1,846 +0,0 @@ -/* - * linux/arch/arm/plat-mxc/dma-v1.c - * - * i.MX DMA registration and IRQ dispatching - * - * Copyright 2006 Pavel Pisa - * Copyright 2008 Juergen Beisert, - * Copyright 2008 Sascha Hauer, - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#define DMA_DCR 0x00 /* Control Register */ -#define DMA_DISR 0x04 /* Interrupt status Register */ -#define DMA_DIMR 0x08 /* Interrupt mask Register */ -#define DMA_DBTOSR 0x0c /* Burst timeout status Register */ -#define DMA_DRTOSR 0x10 /* Request timeout Register */ -#define DMA_DSESR 0x14 /* Transfer Error Status Register */ -#define DMA_DBOSR 0x18 /* Buffer overflow status Register */ -#define DMA_DBTOCR 0x1c /* Burst timeout control Register */ -#define DMA_WSRA 0x40 /* W-Size Register A */ -#define DMA_XSRA 0x44 /* X-Size Register A */ -#define DMA_YSRA 0x48 /* Y-Size Register A */ -#define DMA_WSRB 0x4c /* W-Size Register B */ -#define DMA_XSRB 0x50 /* X-Size Register B */ -#define DMA_YSRB 0x54 /* Y-Size Register B */ -#define DMA_SAR(x) (0x80 + ((x) << 6)) /* Source Address Registers */ -#define DMA_DAR(x) (0x84 + ((x) << 6)) /* Destination Address Registers */ -#define DMA_CNTR(x) (0x88 + ((x) << 6)) /* Count Registers */ -#define DMA_CCR(x) (0x8c + ((x) << 6)) /* Control Registers */ -#define DMA_RSSR(x) (0x90 + ((x) << 6)) /* Request source select Registers */ -#define DMA_BLR(x) (0x94 + ((x) << 6)) /* Burst length Registers */ -#define DMA_RTOR(x) (0x98 + ((x) << 6)) /* Request timeout Registers */ -#define DMA_BUCR(x) (0x98 + ((x) << 6)) /* Bus Utilization Registers */ -#define DMA_CCNR(x) (0x9C + ((x) << 6)) /* Channel counter Registers */ - -#define DCR_DRST (1<<1) -#define DCR_DEN (1<<0) -#define DBTOCR_EN (1<<15) -#define DBTOCR_CNT(x) ((x) & 0x7fff) -#define CNTR_CNT(x) ((x) & 0xffffff) -#define CCR_ACRPT (1<<14) -#define CCR_DMOD_LINEAR (0x0 << 12) -#define CCR_DMOD_2D (0x1 << 12) -#define CCR_DMOD_FIFO (0x2 << 12) -#define CCR_DMOD_EOBFIFO (0x3 << 12) -#define CCR_SMOD_LINEAR (0x0 << 10) -#define CCR_SMOD_2D (0x1 << 10) -#define CCR_SMOD_FIFO (0x2 << 10) -#define CCR_SMOD_EOBFIFO (0x3 << 10) -#define CCR_MDIR_DEC (1<<9) -#define CCR_MSEL_B (1<<8) -#define CCR_DSIZ_32 (0x0 << 6) -#define CCR_DSIZ_8 (0x1 << 6) -#define CCR_DSIZ_16 (0x2 << 6) -#define CCR_SSIZ_32 (0x0 << 4) -#define CCR_SSIZ_8 (0x1 << 4) -#define CCR_SSIZ_16 (0x2 << 4) -#define CCR_REN (1<<3) -#define CCR_RPT (1<<2) -#define CCR_FRC (1<<1) -#define CCR_CEN (1<<0) -#define RTOR_EN (1<<15) -#define RTOR_CLK (1<<14) -#define RTOR_PSC (1<<13) - -/* - * struct imx_dma_channel - i.MX specific DMA extension - * @name: name specified by DMA client - * @irq_handler: client callback for end of transfer - * @err_handler: client callback for error condition - * @data: clients context data for callbacks - * @dma_mode: direction of the transfer %DMA_MODE_READ or %DMA_MODE_WRITE - * @sg: pointer to the actual read/written chunk for scatter-gather emulation - * @resbytes: total residual number of bytes to transfer - * (it can be lower or same as sum of SG mapped chunk sizes) - * @sgcount: number of chunks to be read/written - * - * Structure is used for IMX DMA processing. It would be probably good - * @struct dma_struct in the future for external interfacing and use - * @struct imx_dma_channel only as extension to it. - */ - -struct imx_dma_channel { - const char *name; - void (*irq_handler) (int, void *); - void (*err_handler) (int, void *, int errcode); - void (*prog_handler) (int, void *, struct scatterlist *); - void *data; - unsigned int dma_mode; - struct scatterlist *sg; - unsigned int resbytes; - int dma_num; - - int in_use; - - u32 ccr_from_device; - u32 ccr_to_device; - - struct timer_list watchdog; - - int hw_chaining; -}; - -static void __iomem *imx_dmav1_baseaddr; - -static void imx_dmav1_writel(unsigned val, unsigned offset) -{ - __raw_writel(val, imx_dmav1_baseaddr + offset); -} - -static unsigned imx_dmav1_readl(unsigned offset) -{ - return __raw_readl(imx_dmav1_baseaddr + offset); -} - -static struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS]; - -static struct clk *dma_clk; - -static int imx_dma_hw_chain(struct imx_dma_channel *imxdma) -{ - if (cpu_is_mx27()) - return imxdma->hw_chaining; - else - return 0; -} - -/* - * imx_dma_sg_next - prepare next chunk for scatter-gather DMA emulation - */ -static inline int imx_dma_sg_next(int channel, struct scatterlist *sg) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[channel]; - unsigned long now; - - if (!imxdma->name) { - printk(KERN_CRIT "%s: called for not allocated channel %d\n", - __func__, channel); - return 0; - } - - now = min(imxdma->resbytes, sg->length); - if (imxdma->resbytes != IMX_DMA_LENGTH_LOOP) - imxdma->resbytes -= now; - - if ((imxdma->dma_mode & DMA_MODE_MASK) == DMA_MODE_READ) - imx_dmav1_writel(sg->dma_address, DMA_DAR(channel)); - else - imx_dmav1_writel(sg->dma_address, DMA_SAR(channel)); - - imx_dmav1_writel(now, DMA_CNTR(channel)); - - pr_debug("imxdma%d: next sg chunk dst 0x%08x, src 0x%08x, " - "size 0x%08x\n", channel, - imx_dmav1_readl(DMA_DAR(channel)), - imx_dmav1_readl(DMA_SAR(channel)), - imx_dmav1_readl(DMA_CNTR(channel))); - - return now; -} - -/** - * imx_dma_setup_single - setup i.MX DMA channel for linear memory to/from - * device transfer - * - * @channel: i.MX DMA channel number - * @dma_address: the DMA/physical memory address of the linear data block - * to transfer - * @dma_length: length of the data block in bytes - * @dev_addr: physical device port address - * @dmamode: DMA transfer mode, %DMA_MODE_READ from the device to the memory - * or %DMA_MODE_WRITE from memory to the device - * - * Return value: if incorrect parameters are provided -%EINVAL. - * Zero indicates success. - */ -int -imx_dma_setup_single(int channel, dma_addr_t dma_address, - unsigned int dma_length, unsigned int dev_addr, - unsigned int dmamode) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[channel]; - - imxdma->sg = NULL; - imxdma->dma_mode = dmamode; - - if (!dma_address) { - printk(KERN_ERR "imxdma%d: imx_dma_setup_single null address\n", - channel); - return -EINVAL; - } - - if (!dma_length) { - printk(KERN_ERR "imxdma%d: imx_dma_setup_single zero length\n", - channel); - return -EINVAL; - } - - if ((dmamode & DMA_MODE_MASK) == DMA_MODE_READ) { - pr_debug("imxdma%d: %s dma_addressg=0x%08x dma_length=%d " - "dev_addr=0x%08x for read\n", - channel, __func__, (unsigned int)dma_address, - dma_length, dev_addr); - - imx_dmav1_writel(dev_addr, DMA_SAR(channel)); - imx_dmav1_writel(dma_address, DMA_DAR(channel)); - imx_dmav1_writel(imxdma->ccr_from_device, DMA_CCR(channel)); - } else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) { - pr_debug("imxdma%d: %s dma_addressg=0x%08x dma_length=%d " - "dev_addr=0x%08x for write\n", - channel, __func__, (unsigned int)dma_address, - dma_length, dev_addr); - - imx_dmav1_writel(dma_address, DMA_SAR(channel)); - imx_dmav1_writel(dev_addr, DMA_DAR(channel)); - imx_dmav1_writel(imxdma->ccr_to_device, - DMA_CCR(channel)); - } else { - printk(KERN_ERR "imxdma%d: imx_dma_setup_single bad dmamode\n", - channel); - return -EINVAL; - } - - imx_dmav1_writel(dma_length, DMA_CNTR(channel)); - - return 0; -} -EXPORT_SYMBOL(imx_dma_setup_single); - -/** - * imx_dma_setup_sg - setup i.MX DMA channel SG list to/from device transfer - * @channel: i.MX DMA channel number - * @sg: pointer to the scatter-gather list/vector - * @sgcount: scatter-gather list hungs count - * @dma_length: total length of the transfer request in bytes - * @dev_addr: physical device port address - * @dmamode: DMA transfer mode, %DMA_MODE_READ from the device to the memory - * or %DMA_MODE_WRITE from memory to the device - * - * The function sets up DMA channel state and registers to be ready for - * transfer specified by provided parameters. The scatter-gather emulation - * is set up according to the parameters. - * - * The full preparation of the transfer requires setup of more register - * by the caller before imx_dma_enable() can be called. - * - * %BLR(channel) holds transfer burst length in bytes, 0 means 64 bytes - * - * %RSSR(channel) has to be set to the DMA request line source %DMA_REQ_xxx - * - * %CCR(channel) has to specify transfer parameters, the next settings is - * typical for linear or simple scatter-gather transfers if %DMA_MODE_READ is - * specified - * - * %CCR_DMOD_LINEAR | %CCR_DSIZ_32 | %CCR_SMOD_FIFO | %CCR_SSIZ_x - * - * The typical setup for %DMA_MODE_WRITE is specified by next options - * combination - * - * %CCR_SMOD_LINEAR | %CCR_SSIZ_32 | %CCR_DMOD_FIFO | %CCR_DSIZ_x - * - * Be careful here and do not mistakenly mix source and target device - * port sizes constants, they are really different: - * %CCR_SSIZ_8, %CCR_SSIZ_16, %CCR_SSIZ_32, - * %CCR_DSIZ_8, %CCR_DSIZ_16, %CCR_DSIZ_32 - * - * Return value: if incorrect parameters are provided -%EINVAL. - * Zero indicates success. - */ -int -imx_dma_setup_sg(int channel, - struct scatterlist *sg, unsigned int sgcount, - unsigned int dma_length, unsigned int dev_addr, - unsigned int dmamode) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[channel]; - - if (imxdma->in_use) - return -EBUSY; - - imxdma->sg = sg; - imxdma->dma_mode = dmamode; - imxdma->resbytes = dma_length; - - if (!sg || !sgcount) { - printk(KERN_ERR "imxdma%d: imx_dma_setup_sg empty sg list\n", - channel); - return -EINVAL; - } - - if (!sg->length) { - printk(KERN_ERR "imxdma%d: imx_dma_setup_sg zero length\n", - channel); - return -EINVAL; - } - - if ((dmamode & DMA_MODE_MASK) == DMA_MODE_READ) { - pr_debug("imxdma%d: %s sg=%p sgcount=%d total length=%d " - "dev_addr=0x%08x for read\n", - channel, __func__, sg, sgcount, dma_length, dev_addr); - - imx_dmav1_writel(dev_addr, DMA_SAR(channel)); - imx_dmav1_writel(imxdma->ccr_from_device, DMA_CCR(channel)); - } else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) { - pr_debug("imxdma%d: %s sg=%p sgcount=%d total length=%d " - "dev_addr=0x%08x for write\n", - channel, __func__, sg, sgcount, dma_length, dev_addr); - - imx_dmav1_writel(dev_addr, DMA_DAR(channel)); - imx_dmav1_writel(imxdma->ccr_to_device, DMA_CCR(channel)); - } else { - printk(KERN_ERR "imxdma%d: imx_dma_setup_sg bad dmamode\n", - channel); - return -EINVAL; - } - - imx_dma_sg_next(channel, sg); - - return 0; -} -EXPORT_SYMBOL(imx_dma_setup_sg); - -int -imx_dma_config_channel(int channel, unsigned int config_port, - unsigned int config_mem, unsigned int dmareq, int hw_chaining) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[channel]; - u32 dreq = 0; - - imxdma->hw_chaining = 0; - - if (hw_chaining) { - imxdma->hw_chaining = 1; - if (!imx_dma_hw_chain(imxdma)) - return -EINVAL; - } - - if (dmareq) - dreq = CCR_REN; - - imxdma->ccr_from_device = config_port | (config_mem << 2) | dreq; - imxdma->ccr_to_device = config_mem | (config_port << 2) | dreq; - - imx_dmav1_writel(dmareq, DMA_RSSR(channel)); - - return 0; -} -EXPORT_SYMBOL(imx_dma_config_channel); - -void imx_dma_config_burstlen(int channel, unsigned int burstlen) -{ - imx_dmav1_writel(burstlen, DMA_BLR(channel)); -} -EXPORT_SYMBOL(imx_dma_config_burstlen); - -/** - * imx_dma_setup_handlers - setup i.MX DMA channel end and error notification - * handlers - * @channel: i.MX DMA channel number - * @irq_handler: the pointer to the function called if the transfer - * ends successfully - * @err_handler: the pointer to the function called if the premature - * end caused by error occurs - * @data: user specified value to be passed to the handlers - */ -int -imx_dma_setup_handlers(int channel, - void (*irq_handler) (int, void *), - void (*err_handler) (int, void *, int), - void *data) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[channel]; - unsigned long flags; - - if (!imxdma->name) { - printk(KERN_CRIT "%s: called for not allocated channel %d\n", - __func__, channel); - return -ENODEV; - } - - local_irq_save(flags); - imx_dmav1_writel(1 << channel, DMA_DISR); - imxdma->irq_handler = irq_handler; - imxdma->err_handler = err_handler; - imxdma->data = data; - local_irq_restore(flags); - return 0; -} -EXPORT_SYMBOL(imx_dma_setup_handlers); - -/** - * imx_dma_setup_progression_handler - setup i.MX DMA channel progression - * handlers - * @channel: i.MX DMA channel number - * @prog_handler: the pointer to the function called if the transfer progresses - */ -int -imx_dma_setup_progression_handler(int channel, - void (*prog_handler) (int, void*, struct scatterlist*)) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[channel]; - unsigned long flags; - - if (!imxdma->name) { - printk(KERN_CRIT "%s: called for not allocated channel %d\n", - __func__, channel); - return -ENODEV; - } - - local_irq_save(flags); - imxdma->prog_handler = prog_handler; - local_irq_restore(flags); - return 0; -} -EXPORT_SYMBOL(imx_dma_setup_progression_handler); - -/** - * imx_dma_enable - function to start i.MX DMA channel operation - * @channel: i.MX DMA channel number - * - * The channel has to be allocated by driver through imx_dma_request() - * or imx_dma_request_by_prio() function. - * The transfer parameters has to be set to the channel registers through - * call of the imx_dma_setup_single() or imx_dma_setup_sg() function - * and registers %BLR(channel), %RSSR(channel) and %CCR(channel) has to - * be set prior this function call by the channel user. - */ -void imx_dma_enable(int channel) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[channel]; - unsigned long flags; - - pr_debug("imxdma%d: imx_dma_enable\n", channel); - - if (!imxdma->name) { - printk(KERN_CRIT "%s: called for not allocated channel %d\n", - __func__, channel); - return; - } - - if (imxdma->in_use) - return; - - local_irq_save(flags); - - imx_dmav1_writel(1 << channel, DMA_DISR); - imx_dmav1_writel(imx_dmav1_readl(DMA_DIMR) & ~(1 << channel), DMA_DIMR); - imx_dmav1_writel(imx_dmav1_readl(DMA_CCR(channel)) | CCR_CEN | - CCR_ACRPT, DMA_CCR(channel)); - - if ((cpu_is_mx21() || cpu_is_mx27()) && - imxdma->sg && imx_dma_hw_chain(imxdma)) { - imxdma->sg = sg_next(imxdma->sg); - if (imxdma->sg) { - u32 tmp; - imx_dma_sg_next(channel, imxdma->sg); - tmp = imx_dmav1_readl(DMA_CCR(channel)); - imx_dmav1_writel(tmp | CCR_RPT | CCR_ACRPT, - DMA_CCR(channel)); - } - } - imxdma->in_use = 1; - - local_irq_restore(flags); -} -EXPORT_SYMBOL(imx_dma_enable); - -/** - * imx_dma_disable - stop, finish i.MX DMA channel operatin - * @channel: i.MX DMA channel number - */ -void imx_dma_disable(int channel) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[channel]; - unsigned long flags; - - pr_debug("imxdma%d: imx_dma_disable\n", channel); - - if (imx_dma_hw_chain(imxdma)) - del_timer(&imxdma->watchdog); - - local_irq_save(flags); - imx_dmav1_writel(imx_dmav1_readl(DMA_DIMR) | (1 << channel), DMA_DIMR); - imx_dmav1_writel(imx_dmav1_readl(DMA_CCR(channel)) & ~CCR_CEN, - DMA_CCR(channel)); - imx_dmav1_writel(1 << channel, DMA_DISR); - imxdma->in_use = 0; - local_irq_restore(flags); -} -EXPORT_SYMBOL(imx_dma_disable); - -static void imx_dma_watchdog(unsigned long chno) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[chno]; - - imx_dmav1_writel(0, DMA_CCR(chno)); - imxdma->in_use = 0; - imxdma->sg = NULL; - - if (imxdma->err_handler) - imxdma->err_handler(chno, imxdma->data, IMX_DMA_ERR_TIMEOUT); -} - -static irqreturn_t dma_err_handler(int irq, void *dev_id) -{ - int i, disr; - struct imx_dma_channel *imxdma; - unsigned int err_mask; - int errcode; - - disr = imx_dmav1_readl(DMA_DISR); - - err_mask = imx_dmav1_readl(DMA_DBTOSR) | - imx_dmav1_readl(DMA_DRTOSR) | - imx_dmav1_readl(DMA_DSESR) | - imx_dmav1_readl(DMA_DBOSR); - - if (!err_mask) - return IRQ_HANDLED; - - imx_dmav1_writel(disr & err_mask, DMA_DISR); - - for (i = 0; i < IMX_DMA_CHANNELS; i++) { - if (!(err_mask & (1 << i))) - continue; - imxdma = &imx_dma_channels[i]; - errcode = 0; - - if (imx_dmav1_readl(DMA_DBTOSR) & (1 << i)) { - imx_dmav1_writel(1 << i, DMA_DBTOSR); - errcode |= IMX_DMA_ERR_BURST; - } - if (imx_dmav1_readl(DMA_DRTOSR) & (1 << i)) { - imx_dmav1_writel(1 << i, DMA_DRTOSR); - errcode |= IMX_DMA_ERR_REQUEST; - } - if (imx_dmav1_readl(DMA_DSESR) & (1 << i)) { - imx_dmav1_writel(1 << i, DMA_DSESR); - errcode |= IMX_DMA_ERR_TRANSFER; - } - if (imx_dmav1_readl(DMA_DBOSR) & (1 << i)) { - imx_dmav1_writel(1 << i, DMA_DBOSR); - errcode |= IMX_DMA_ERR_BUFFER; - } - if (imxdma->name && imxdma->err_handler) { - imxdma->err_handler(i, imxdma->data, errcode); - continue; - } - - imx_dma_channels[i].sg = NULL; - - printk(KERN_WARNING - "DMA timeout on channel %d (%s) -%s%s%s%s\n", - i, imxdma->name, - errcode & IMX_DMA_ERR_BURST ? " burst" : "", - errcode & IMX_DMA_ERR_REQUEST ? " request" : "", - errcode & IMX_DMA_ERR_TRANSFER ? " transfer" : "", - errcode & IMX_DMA_ERR_BUFFER ? " buffer" : ""); - } - return IRQ_HANDLED; -} - -static void dma_irq_handle_channel(int chno) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[chno]; - - if (!imxdma->name) { - /* - * IRQ for an unregistered DMA channel: - * let's clear the interrupts and disable it. - */ - printk(KERN_WARNING - "spurious IRQ for DMA channel %d\n", chno); - return; - } - - if (imxdma->sg) { - u32 tmp; - struct scatterlist *current_sg = imxdma->sg; - imxdma->sg = sg_next(imxdma->sg); - - if (imxdma->sg) { - imx_dma_sg_next(chno, imxdma->sg); - - tmp = imx_dmav1_readl(DMA_CCR(chno)); - - if (imx_dma_hw_chain(imxdma)) { - /* FIXME: The timeout should probably be - * configurable - */ - mod_timer(&imxdma->watchdog, - jiffies + msecs_to_jiffies(500)); - - tmp |= CCR_CEN | CCR_RPT | CCR_ACRPT; - imx_dmav1_writel(tmp, DMA_CCR(chno)); - } else { - imx_dmav1_writel(tmp & ~CCR_CEN, DMA_CCR(chno)); - tmp |= CCR_CEN; - } - - imx_dmav1_writel(tmp, DMA_CCR(chno)); - - if (imxdma->prog_handler) - imxdma->prog_handler(chno, imxdma->data, - current_sg); - - return; - } - - if (imx_dma_hw_chain(imxdma)) { - del_timer(&imxdma->watchdog); - return; - } - } - - imx_dmav1_writel(0, DMA_CCR(chno)); - imxdma->in_use = 0; - if (imxdma->irq_handler) - imxdma->irq_handler(chno, imxdma->data); -} - -static irqreturn_t dma_irq_handler(int irq, void *dev_id) -{ - int i, disr; - - if (cpu_is_mx21() || cpu_is_mx27()) - dma_err_handler(irq, dev_id); - - disr = imx_dmav1_readl(DMA_DISR); - - pr_debug("imxdma: dma_irq_handler called, disr=0x%08x\n", - disr); - - imx_dmav1_writel(disr, DMA_DISR); - for (i = 0; i < IMX_DMA_CHANNELS; i++) { - if (disr & (1 << i)) - dma_irq_handle_channel(i); - } - - return IRQ_HANDLED; -} - -/** - * imx_dma_request - request/allocate specified channel number - * @channel: i.MX DMA channel number - * @name: the driver/caller own non-%NULL identification - */ -int imx_dma_request(int channel, const char *name) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[channel]; - unsigned long flags; - int ret = 0; - - /* basic sanity checks */ - if (!name) - return -EINVAL; - - if (channel >= IMX_DMA_CHANNELS) { - printk(KERN_CRIT "%s: called for non-existed channel %d\n", - __func__, channel); - return -EINVAL; - } - - local_irq_save(flags); - if (imxdma->name) { - local_irq_restore(flags); - return -EBUSY; - } - memset(imxdma, 0, sizeof(*imxdma)); - imxdma->name = name; - local_irq_restore(flags); /* request_irq() can block */ - - if (cpu_is_mx21() || cpu_is_mx27()) { - ret = request_irq(MX2x_INT_DMACH0 + channel, - dma_irq_handler, 0, "DMA", NULL); - if (ret) { - imxdma->name = NULL; - pr_crit("Can't register IRQ %d for DMA channel %d\n", - MX2x_INT_DMACH0 + channel, channel); - return ret; - } - init_timer(&imxdma->watchdog); - imxdma->watchdog.function = &imx_dma_watchdog; - imxdma->watchdog.data = channel; - } - - return ret; -} -EXPORT_SYMBOL(imx_dma_request); - -/** - * imx_dma_free - release previously acquired channel - * @channel: i.MX DMA channel number - */ -void imx_dma_free(int channel) -{ - unsigned long flags; - struct imx_dma_channel *imxdma = &imx_dma_channels[channel]; - - if (!imxdma->name) { - printk(KERN_CRIT - "%s: trying to free free channel %d\n", - __func__, channel); - return; - } - - local_irq_save(flags); - /* Disable interrupts */ - imx_dma_disable(channel); - imxdma->name = NULL; - - if (cpu_is_mx21() || cpu_is_mx27()) - free_irq(MX2x_INT_DMACH0 + channel, NULL); - - local_irq_restore(flags); -} -EXPORT_SYMBOL(imx_dma_free); - -/** - * imx_dma_request_by_prio - find and request some of free channels best - * suiting requested priority - * @channel: i.MX DMA channel number - * @name: the driver/caller own non-%NULL identification - * - * This function tries to find a free channel in the specified priority group - * if the priority cannot be achieved it tries to look for free channel - * in the higher and then even lower priority groups. - * - * Return value: If there is no free channel to allocate, -%ENODEV is returned. - * On successful allocation channel is returned. - */ -int imx_dma_request_by_prio(const char *name, enum imx_dma_prio prio) -{ - int i; - int best; - - switch (prio) { - case (DMA_PRIO_HIGH): - best = 8; - break; - case (DMA_PRIO_MEDIUM): - best = 4; - break; - case (DMA_PRIO_LOW): - default: - best = 0; - break; - } - - for (i = best; i < IMX_DMA_CHANNELS; i++) - if (!imx_dma_request(i, name)) - return i; - - for (i = best - 1; i >= 0; i--) - if (!imx_dma_request(i, name)) - return i; - - printk(KERN_ERR "%s: no free DMA channel found\n", __func__); - - return -ENODEV; -} -EXPORT_SYMBOL(imx_dma_request_by_prio); - -static int __init imx_dma_init(void) -{ - int ret = 0; - int i; - - if (cpu_is_mx1()) - imx_dmav1_baseaddr = MX1_IO_ADDRESS(MX1_DMA_BASE_ADDR); - else if (cpu_is_mx21()) - imx_dmav1_baseaddr = MX21_IO_ADDRESS(MX21_DMA_BASE_ADDR); - else if (cpu_is_mx27()) - imx_dmav1_baseaddr = MX27_IO_ADDRESS(MX27_DMA_BASE_ADDR); - else - return 0; - - dma_clk = clk_get(NULL, "dma"); - if (IS_ERR(dma_clk)) - return PTR_ERR(dma_clk); - clk_enable(dma_clk); - - /* reset DMA module */ - imx_dmav1_writel(DCR_DRST, DMA_DCR); - - if (cpu_is_mx1()) { - ret = request_irq(MX1_DMA_INT, dma_irq_handler, 0, "DMA", NULL); - if (ret) { - pr_crit("Wow! Can't register IRQ for DMA\n"); - return ret; - } - - ret = request_irq(MX1_DMA_ERR, dma_err_handler, 0, "DMA", NULL); - if (ret) { - pr_crit("Wow! Can't register ERRIRQ for DMA\n"); - free_irq(MX1_DMA_INT, NULL); - return ret; - } - } - - /* enable DMA module */ - imx_dmav1_writel(DCR_DEN, DMA_DCR); - - /* clear all interrupts */ - imx_dmav1_writel((1 << IMX_DMA_CHANNELS) - 1, DMA_DISR); - - /* disable interrupts */ - imx_dmav1_writel((1 << IMX_DMA_CHANNELS) - 1, DMA_DIMR); - - for (i = 0; i < IMX_DMA_CHANNELS; i++) { - imx_dma_channels[i].sg = NULL; - imx_dma_channels[i].dma_num = i; - } - - return ret; -} - -arch_initcall(imx_dma_init); diff --git a/arch/arm/mach-imx/include/mach/dma-v1.h b/arch/arm/mach-imx/include/mach/dma-v1.h deleted file mode 100644 index ac6fd71..0000000 --- a/arch/arm/mach-imx/include/mach/dma-v1.h +++ /dev/null @@ -1,103 +0,0 @@ -/* - * linux/arch/arm/mach-imx/include/mach/dma-v1.h - * - * i.MX DMA registration and IRQ dispatching - * - * Copyright 2006 Pavel Pisa - * Copyright 2008 Juergen Beisert, - * Copyright 2008 Sascha Hauer, - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __MACH_DMA_V1_H__ -#define __MACH_DMA_V1_H__ - -#define imx_has_dma_v1() (cpu_is_mx1() || cpu_is_mx21() || cpu_is_mx27()) - -#include - -#define IMX_DMA_CHANNELS 16 - -#define DMA_MODE_READ 0 -#define DMA_MODE_WRITE 1 -#define DMA_MODE_MASK 1 - -#define MX1_DMA_REG(offset) MX1_IO_ADDRESS(MX1_DMA_BASE_ADDR + (offset)) - -/* DMA Interrupt Mask Register */ -#define MX1_DMA_DIMR MX1_DMA_REG(0x08) - -/* Channel Control Register */ -#define MX1_DMA_CCR(x) MX1_DMA_REG(0x8c + ((x) << 6)) - -#define IMX_DMA_MEMSIZE_32 (0 << 4) -#define IMX_DMA_MEMSIZE_8 (1 << 4) -#define IMX_DMA_MEMSIZE_16 (2 << 4) -#define IMX_DMA_TYPE_LINEAR (0 << 10) -#define IMX_DMA_TYPE_2D (1 << 10) -#define IMX_DMA_TYPE_FIFO (2 << 10) - -#define IMX_DMA_ERR_BURST (1 << 0) -#define IMX_DMA_ERR_REQUEST (1 << 1) -#define IMX_DMA_ERR_TRANSFER (1 << 2) -#define IMX_DMA_ERR_BUFFER (1 << 3) -#define IMX_DMA_ERR_TIMEOUT (1 << 4) - -int -imx_dma_config_channel(int channel, unsigned int config_port, - unsigned int config_mem, unsigned int dmareq, int hw_chaining); - -void -imx_dma_config_burstlen(int channel, unsigned int burstlen); - -int -imx_dma_setup_single(int channel, dma_addr_t dma_address, - unsigned int dma_length, unsigned int dev_addr, - unsigned int dmamode); - - -/* - * Use this flag as the dma_length argument to imx_dma_setup_sg() - * to create an endless running dma loop. The end of the scatterlist - * must be linked to the beginning for this to work. - */ -#define IMX_DMA_LENGTH_LOOP ((unsigned int)-1) - -int -imx_dma_setup_sg(int channel, struct scatterlist *sg, - unsigned int sgcount, unsigned int dma_length, - unsigned int dev_addr, unsigned int dmamode); - -int -imx_dma_setup_handlers(int channel, - void (*irq_handler) (int, void *), - void (*err_handler) (int, void *, int), void *data); - -int -imx_dma_setup_progression_handler(int channel, - void (*prog_handler) (int, void*, struct scatterlist*)); - -void imx_dma_enable(int channel); - -void imx_dma_disable(int channel); - -int imx_dma_request(int channel, const char *name); - -void imx_dma_free(int channel); - -int imx_dma_request_by_prio(const char *name, enum imx_dma_prio prio); - -#endif /* __MACH_DMA_V1_H__ */ -- cgit v1.1