From 49b26e0dfdaea23bdae182110c58d63d566b288a Mon Sep 17 00:00:00 2001 From: David Brown Date: Tue, 8 Nov 2011 09:40:07 -0800 Subject: ARM: msm: Remove call to missing FPGA init on 8660 A previous patch[1] added code to initialize an FPGA register on the 8660 "SURF" development platform. Since this development platform is not widely available, and there is now a more available device "the Dragonboard" based on the same core SOC, this change was dropped. However, the DT code kept a lingering call to this FPGA init function. Remove it. [1] https://lkml.org/lkml/2011/8/12/357 Signed-off-by: David Brown --- arch/arm/mach-msm/board-msm8x60.c | 5 ----- 1 file changed, 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c index e37a724..06003b4 100644 --- a/arch/arm/mach-msm/board-msm8x60.c +++ b/arch/arm/mach-msm/board-msm8x60.c @@ -93,11 +93,6 @@ static struct of_dev_auxdata msm_auxdata_lookup[] __initdata = { static void __init msm8x60_dt_init(void) { - if (of_machine_is_compatible("qcom,msm8660-surf")) { - printk(KERN_INFO "Init surf UART registers\n"); - msm8x60_init_uart12dm(); - } - of_platform_populate(NULL, of_default_bus_match_table, msm_auxdata_lookup, NULL); } -- cgit v1.1 From 460709a6f12cced5c7a7e675521812e63ba1e1be Mon Sep 17 00:00:00 2001 From: Rohit Vaswani Date: Fri, 10 Aug 2012 14:18:00 -0700 Subject: ARM: msm: io: Remove 7x30 iomap region from 7x00 This is redundant code. Signed-off-by: Rohit Vaswani Signed-off-by: David Brown --- arch/arm/mach-msm/io.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c index a1e7b11..2409c0b 100644 --- a/arch/arm/mach-msm/io.c +++ b/arch/arm/mach-msm/io.c @@ -51,9 +51,6 @@ static struct map_desc msm_io_desc[] __initdata = { defined(CONFIG_DEBUG_MSM_UART3) MSM_DEVICE(DEBUG_UART), #endif -#ifdef CONFIG_ARCH_MSM7X30 - MSM_DEVICE(GCC), -#endif { .virtual = (unsigned long) MSM_SHARED_RAM_BASE, .pfn = __phys_to_pfn(MSM_SHARED_RAM_PHYS), -- cgit v1.1 From 90eb385fd1bad5d4b7ad419d29763b28dd9d05a6 Mon Sep 17 00:00:00 2001 From: Rohit Vaswani Date: Fri, 7 Sep 2012 13:05:56 -0700 Subject: ARM: msm: io: Change the default static iomappings to be shared With 3.4 kernel the static iomappings can be shared with the ioremap mappings. If ioremap is called with an address for which a static mapping already exists, then that mapping should be used instead of creating a new one. However, the MT_DEVICE_NONSHARED flag prevents this. Hence, get rid of this flag. Some targets (7X00) that require the static iomappings to be NONSHARED use the MSM_DEVICE_TYPE and MSM_CHIP_DEVICE_TYPE macros. Signed-off-by: Rohit Vaswani Signed-off-by: David Brown --- arch/arm/mach-msm/io.c | 22 +++++++++++++--------- 1 file changed, 13 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c index 2409c0b..af43f6a 100644 --- a/arch/arm/mach-msm/io.c +++ b/arch/arm/mach-msm/io.c @@ -29,27 +29,31 @@ #include -#define MSM_CHIP_DEVICE(name, chip) { \ +#define MSM_CHIP_DEVICE_TYPE(name, chip, mem_type) { \ .virtual = (unsigned long) MSM_##name##_BASE, \ .pfn = __phys_to_pfn(chip##_##name##_PHYS), \ .length = chip##_##name##_SIZE, \ - .type = MT_DEVICE_NONSHARED, \ + .type = mem_type, \ } +#define MSM_DEVICE_TYPE(name, mem_type) \ + MSM_CHIP_DEVICE_TYPE(name, MSM, mem_type) +#define MSM_CHIP_DEVICE(name, chip) \ + MSM_CHIP_DEVICE_TYPE(name, chip, MT_DEVICE) #define MSM_DEVICE(name) MSM_CHIP_DEVICE(name, MSM) #if defined(CONFIG_ARCH_MSM7X00A) || defined(CONFIG_ARCH_MSM7X27) \ || defined(CONFIG_ARCH_MSM7X25) static struct map_desc msm_io_desc[] __initdata = { - MSM_DEVICE(VIC), - MSM_CHIP_DEVICE(CSR, MSM7X00), - MSM_DEVICE(DMOV), - MSM_CHIP_DEVICE(GPIO1, MSM7X00), - MSM_CHIP_DEVICE(GPIO2, MSM7X00), - MSM_DEVICE(CLK_CTL), + MSM_DEVICE_TYPE(VIC, MT_DEVICE_NONSHARED), + MSM_CHIP_DEVICE_TYPE(CSR, MSM7X00, MT_DEVICE_NONSHARED), + MSM_DEVICE_TYPE(DMOV, MT_DEVICE_NONSHARED), + MSM_CHIP_DEVICE_TYPE(GPIO1, MSM7X00, MT_DEVICE_NONSHARED), + MSM_CHIP_DEVICE_TYPE(GPIO2, MSM7X00, MT_DEVICE_NONSHARED), + MSM_DEVICE_TYPE(CLK_CTL, MT_DEVICE_NONSHARED), #if defined(CONFIG_DEBUG_MSM_UART1) || defined(CONFIG_DEBUG_MSM_UART2) || \ defined(CONFIG_DEBUG_MSM_UART3) - MSM_DEVICE(DEBUG_UART), + MSM_DEVICE_TYPE(DEBUG_UART, MT_DEVICE_NONSHARED), #endif { .virtual = (unsigned long) MSM_SHARED_RAM_BASE, -- cgit v1.1 From 085eea143effef565e6b508ccb793921d0d7f4d4 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Wed, 22 Aug 2012 15:55:43 -0700 Subject: ARM: msm: Remove msm_hw_reset_hook This reset hook is never assigned and is dead code. Remove it so we have one less header file in the mach directory. Signed-off-by: Stephen Boyd Signed-off-by: David Brown --- arch/arm/mach-msm/board-mahimahi.c | 1 - arch/arm/mach-msm/board-sapphire.c | 1 - arch/arm/mach-msm/include/mach/system.h | 19 ------------------- arch/arm/mach-msm/proc_comm.c | 1 - arch/arm/mach-msm/smd.c | 7 ------- 5 files changed, 29 deletions(-) delete mode 100644 arch/arm/mach-msm/include/mach/system.h (limited to 'arch') diff --git a/arch/arm/mach-msm/board-mahimahi.c b/arch/arm/mach-msm/board-mahimahi.c index cf1f89a..df00bc0 100644 --- a/arch/arm/mach-msm/board-mahimahi.c +++ b/arch/arm/mach-msm/board-mahimahi.c @@ -30,7 +30,6 @@ #include #include -#include #include "board-mahimahi.h" #include "devices.h" diff --git a/arch/arm/mach-msm/board-sapphire.c b/arch/arm/mach-msm/board-sapphire.c index 2e569ab..b7b0fc7 100644 --- a/arch/arm/mach-msm/board-sapphire.c +++ b/arch/arm/mach-msm/board-sapphire.c @@ -27,7 +27,6 @@ #include #include #include -#include #include #include diff --git a/arch/arm/mach-msm/include/mach/system.h b/arch/arm/mach-msm/include/mach/system.h deleted file mode 100644 index f5fb2ec..0000000 --- a/arch/arm/mach-msm/include/mach/system.h +++ /dev/null @@ -1,19 +0,0 @@ -/* arch/arm/mach-msm/include/mach/system.h - * - * Copyright (C) 2007 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -/* low level hardware reset hook -- for example, hitting the - * PSHOLD line on the PMIC to hard reset the system - */ -extern void (*msm_hw_reset_hook)(void); diff --git a/arch/arm/mach-msm/proc_comm.c b/arch/arm/mach-msm/proc_comm.c index 9980dc7..8f1eecd 100644 --- a/arch/arm/mach-msm/proc_comm.c +++ b/arch/arm/mach-msm/proc_comm.c @@ -19,7 +19,6 @@ #include #include #include -#include #include "proc_comm.h" diff --git a/arch/arm/mach-msm/smd.c b/arch/arm/mach-msm/smd.c index 657be73..84183ed 100644 --- a/arch/arm/mach-msm/smd.c +++ b/arch/arm/mach-msm/smd.c @@ -30,7 +30,6 @@ #include #include -#include #include "smd_private.h" #include "proc_comm.h" @@ -39,8 +38,6 @@ #define CONFIG_QDSP6 1 #endif -void (*msm_hw_reset_hook)(void); - #define MODULE_NAME "msm_smd" enum { @@ -101,10 +98,6 @@ static void handle_modem_crash(void) pr_err("ARM9 has CRASHED\n"); smd_diag(); - /* hard reboot if possible */ - if (msm_hw_reset_hook) - msm_hw_reset_hook(); - /* in this case the modem or watchdog should reboot us */ for (;;) ; -- cgit v1.1 From 56417056622794710e6dfc6559c01277a1164561 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Wed, 22 Aug 2012 15:55:44 -0700 Subject: ARM: msm: clock-pcom: Mark functions static These functions are only used within clock-pcom.c, therefore mark them as static. Signed-off-by: Stephen Boyd Signed-off-by: David Brown --- arch/arm/mach-msm/clock-pcom.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-msm/clock-pcom.c b/arch/arm/mach-msm/clock-pcom.c index 63b7113..a52c970 100644 --- a/arch/arm/mach-msm/clock-pcom.c +++ b/arch/arm/mach-msm/clock-pcom.c @@ -25,7 +25,7 @@ /* * glue for the proc_comm interface */ -int pc_clk_enable(unsigned id) +static int pc_clk_enable(unsigned id) { int rc = msm_proc_comm(PCOM_CLKCTL_RPC_ENABLE, &id, NULL); if (rc < 0) @@ -34,7 +34,7 @@ int pc_clk_enable(unsigned id) return (int)id < 0 ? -EINVAL : 0; } -void pc_clk_disable(unsigned id) +static void pc_clk_disable(unsigned id) { msm_proc_comm(PCOM_CLKCTL_RPC_DISABLE, &id, NULL); } @@ -54,7 +54,7 @@ int pc_clk_reset(unsigned id, enum clk_reset_action action) return (int)id < 0 ? -EINVAL : 0; } -int pc_clk_set_rate(unsigned id, unsigned rate) +static int pc_clk_set_rate(unsigned id, unsigned rate) { /* The rate _might_ be rounded off to the nearest KHz value by the * remote function. So a return value of 0 doesn't necessarily mean @@ -67,7 +67,7 @@ int pc_clk_set_rate(unsigned id, unsigned rate) return (int)id < 0 ? -EINVAL : 0; } -int pc_clk_set_min_rate(unsigned id, unsigned rate) +static int pc_clk_set_min_rate(unsigned id, unsigned rate) { int rc = msm_proc_comm(PCOM_CLKCTL_RPC_MIN_RATE, &id, &rate); if (rc < 0) @@ -76,7 +76,7 @@ int pc_clk_set_min_rate(unsigned id, unsigned rate) return (int)id < 0 ? -EINVAL : 0; } -int pc_clk_set_max_rate(unsigned id, unsigned rate) +static int pc_clk_set_max_rate(unsigned id, unsigned rate) { int rc = msm_proc_comm(PCOM_CLKCTL_RPC_MAX_RATE, &id, &rate); if (rc < 0) @@ -85,7 +85,7 @@ int pc_clk_set_max_rate(unsigned id, unsigned rate) return (int)id < 0 ? -EINVAL : 0; } -int pc_clk_set_flags(unsigned id, unsigned flags) +static int pc_clk_set_flags(unsigned id, unsigned flags) { int rc = msm_proc_comm(PCOM_CLKCTL_RPC_SET_FLAGS, &id, &flags); if (rc < 0) @@ -94,7 +94,7 @@ int pc_clk_set_flags(unsigned id, unsigned flags) return (int)id < 0 ? -EINVAL : 0; } -unsigned pc_clk_get_rate(unsigned id) +static unsigned pc_clk_get_rate(unsigned id) { if (msm_proc_comm(PCOM_CLKCTL_RPC_RATE, &id, NULL)) return 0; @@ -102,7 +102,7 @@ unsigned pc_clk_get_rate(unsigned id) return id; } -unsigned pc_clk_is_enabled(unsigned id) +static unsigned pc_clk_is_enabled(unsigned id) { if (msm_proc_comm(PCOM_CLKCTL_RPC_ENABLED, &id, NULL)) return 0; @@ -110,7 +110,7 @@ unsigned pc_clk_is_enabled(unsigned id) return id; } -long pc_clk_round_rate(unsigned id, unsigned rate) +static long pc_clk_round_rate(unsigned id, unsigned rate) { /* Not really supported; pc_clk_set_rate() does rounding on it's own. */ -- cgit v1.1 From b07609cf88e51043d81809845384f96cffb3ab3e Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Wed, 22 Aug 2012 15:55:45 -0700 Subject: ARM: msm: Remove unused idle.c Forcing arm_pm_idle to be msm_idle() doesn't make sense in configurations that don't have CONFIG_MSM7X00A_IDLE=y (i.e. any targets that aren't 7x00a). Furthermore, that config doesn't even exist, so this entire file is dead code. Just remove it so we can use the default idle support on MSM. Signed-off-by: Stephen Boyd Signed-off-by: David Brown --- arch/arm/mach-msm/Makefile | 2 +- arch/arm/mach-msm/idle.c | 49 ---------------------------------------------- 2 files changed, 1 insertion(+), 50 deletions(-) delete mode 100644 arch/arm/mach-msm/idle.c (limited to 'arch') diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile index 4ad3969..5fd0464 100644 --- a/arch/arm/mach-msm/Makefile +++ b/arch/arm/mach-msm/Makefile @@ -1,4 +1,4 @@ -obj-y += io.o idle.o timer.o +obj-y += io.o timer.o obj-y += clock.o obj-$(CONFIG_DEBUG_FS) += clock-debug.o diff --git a/arch/arm/mach-msm/idle.c b/arch/arm/mach-msm/idle.c deleted file mode 100644 index 0c9e13c..0000000 --- a/arch/arm/mach-msm/idle.c +++ /dev/null @@ -1,49 +0,0 @@ -/* arch/arm/mach-msm/idle.c - * - * Idle processing for MSM7K - work around bugs with SWFI. - * - * Copyright (c) 2007 QUALCOMM Incorporated. - * Copyright (C) 2007 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include -#include - -static void msm_idle(void) -{ -#ifdef CONFIG_MSM7X00A_IDLE - asm volatile ( - - "mrc p15, 0, r1, c1, c0, 0 /* read current CR */ \n\t" - "bic r0, r1, #(1 << 2) /* clear dcache bit */ \n\t" - "bic r0, r0, #(1 << 12) /* clear icache bit */ \n\t" - "mcr p15, 0, r0, c1, c0, 0 /* disable d/i cache */ \n\t" - - "mov r0, #0 /* prepare wfi value */ \n\t" - "mcr p15, 0, r0, c7, c10, 0 /* flush the cache */ \n\t" - "mcr p15, 0, r0, c7, c10, 4 /* memory barrier */ \n\t" - "mcr p15, 0, r0, c7, c0, 4 /* wait for interrupt */ \n\t" - - "mcr p15, 0, r1, c1, c0, 0 /* restore d/i cache */ \n\t" - - : : : "r0","r1" ); -#endif -} - -static int __init msm_idle_init(void) -{ - arm_pm_idle = msm_idle; - return 0; -} - -arch_initcall(msm_idle_init); -- cgit v1.1 From 10717e04d3502cf4a8aa6408d59093e2bbb4645b Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Mon, 27 Aug 2012 16:35:21 -0700 Subject: ARM: msm: Fix early debug uart mapping on some memory configs The uart mapping runs into the space allocated for lowmem on some 8960 boards when we have more than 512Mb of memory. We were getting lucky before and our mapping wasn't part of DDR. Move the mapping up into the vmalloc area which will always be outside of the lowmem mapping regardless of how much lowmem actually exists. Signed-off-by: Stephen Boyd Signed-off-by: David Brown --- arch/arm/mach-msm/include/mach/msm_iomap-8960.h | 2 +- arch/arm/mach-msm/include/mach/msm_iomap-8x60.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8960.h b/arch/arm/mach-msm/include/mach/msm_iomap-8960.h index a1752c0..facf434 100644 --- a/arch/arm/mach-msm/include/mach/msm_iomap-8960.h +++ b/arch/arm/mach-msm/include/mach/msm_iomap-8960.h @@ -46,7 +46,7 @@ #define MSM8960_TMR0_SIZE SZ_4K #ifdef CONFIG_DEBUG_MSM8960_UART -#define MSM_DEBUG_UART_BASE 0xE1040000 +#define MSM_DEBUG_UART_BASE 0xF0040000 #define MSM_DEBUG_UART_PHYS 0x16440000 #endif diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h b/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h index 5aed57d..21a2a88 100644 --- a/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h +++ b/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h @@ -63,7 +63,7 @@ #define MSM8X60_TMR0_SIZE SZ_4K #ifdef CONFIG_DEBUG_MSM8660_UART -#define MSM_DEBUG_UART_BASE 0xE1040000 +#define MSM_DEBUG_UART_BASE 0xF0040000 #define MSM_DEBUG_UART_PHYS 0x19C40000 #endif -- cgit v1.1 From 3b5909deb3ed276727d248a5289954a142b2c686 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Tue, 4 Sep 2012 13:17:33 -0700 Subject: ARM: msm: Fix sparse warnings due to incorrect type arch/arm/mach-msm/timer.c:153:3: warning: incorrect type in initializer (different address spaces) arch/arm/mach-msm/timer.c:153:3: expected void const [noderef] *__vpp_verify arch/arm/mach-msm/timer.c:153:3: got struct clock_event_device [noderef] ** arch/arm/mach-msm/timer.c:153:38: warning: incorrect type in assignment (different address spaces) arch/arm/mach-msm/timer.c:153:38: expected struct clock_event_device [noderef] * arch/arm/mach-msm/timer.c:153:38: got struct clock_event_device *evt arch/arm/mach-msm/timer.c:191:22: warning: incorrect type in assignment (different address spaces) arch/arm/mach-msm/timer.c:191:22: expected struct clock_event_device [noderef] **static [toplevel] percpu_evt arch/arm/mach-msm/timer.c:191:22: got struct clock_event_device *[noderef] * arch/arm/mach-msm/timer.c:196:4: warning: incorrect type in initializer (different address spaces) arch/arm/mach-msm/timer.c:196:4: expected void const [noderef] *__vpp_verify arch/arm/mach-msm/timer.c:196:4: got struct clock_event_device [noderef] ** arch/arm/mach-msm/timer.c:196:39: warning: incorrect type in assignment (different address spaces) arch/arm/mach-msm/timer.c:196:39: expected struct clock_event_device [noderef] * arch/arm/mach-msm/timer.c:196:39: got struct clock_event_device *ce arch/arm/mach-msm/timer.c:198:24: warning: incorrect type in argument 4 (different address spaces) arch/arm/mach-msm/timer.c:198:24: expected void [noderef] *percpu_dev_id arch/arm/mach-msm/timer.c:198:24: got struct clock_event_device [noderef] **static [toplevel] percpu_evt Signed-off-by: Stephen Boyd Signed-off-by: David Brown --- arch/arm/mach-msm/timer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c index 81280825..004f935 100644 --- a/arch/arm/mach-msm/timer.c +++ b/arch/arm/mach-msm/timer.c @@ -101,7 +101,7 @@ static struct clock_event_device msm_clockevent = { static union { struct clock_event_device *evt; - struct clock_event_device __percpu **percpu_evt; + struct clock_event_device * __percpu *percpu_evt; } msm_evt; static void __iomem *source_base; -- cgit v1.1 From 6eebf2de9e315dbad4f5f5d8f9faa249a38f5f09 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 5 Sep 2012 14:53:46 +0800 Subject: ARM: msm: dma: use list_move_tail instead of list_del/list_add_tail Using list_move_tail() instead of list_del() + list_add_tail(). spatch with a semantic match is used to found this problem. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun Signed-off-by: David Brown --- arch/arm/mach-msm/dma.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-msm/dma.c b/arch/arm/mach-msm/dma.c index 02cae5e..354b91d 100644 --- a/arch/arm/mach-msm/dma.c +++ b/arch/arm/mach-msm/dma.c @@ -223,8 +223,7 @@ static irqreturn_t msm_datamover_irq_handler(int irq, void *dev_id) PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n", id, ch_status); if ((ch_status & DMOV_STATUS_CMD_PTR_RDY) && !list_empty(&ready_commands[id])) { cmd = list_entry(ready_commands[id].next, typeof(*cmd), list); - list_del(&cmd->list); - list_add_tail(&cmd->list, &active_commands[id]); + list_move_tail(&cmd->list, &active_commands[id]); if (cmd->execute_func) cmd->execute_func(cmd); PRINT_FLOW("msm_datamover_irq_handler id %d, start command\n", id); -- cgit v1.1 From 07901bb0379f146863e00fe09200502206e225f3 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Thu, 6 Sep 2012 19:48:40 -0700 Subject: ARM: msm: Remove unused acpuclock-arm11 This is dead code that isn't initialized or setup (although it is compiled). Remove it and the data structures it references. Signed-off-by: Stephen Boyd Signed-off-by: David Brown --- arch/arm/mach-msm/Makefile | 2 +- arch/arm/mach-msm/acpuclock-arm11.c | 525 --------------------------------- arch/arm/mach-msm/acpuclock.h | 32 -- arch/arm/mach-msm/include/mach/board.h | 10 - 4 files changed, 1 insertion(+), 568 deletions(-) delete mode 100644 arch/arm/mach-msm/acpuclock-arm11.c delete mode 100644 arch/arm/mach-msm/acpuclock.h (limited to 'arch') diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile index 5fd0464..6a6c197 100644 --- a/arch/arm/mach-msm/Makefile +++ b/arch/arm/mach-msm/Makefile @@ -5,7 +5,7 @@ obj-$(CONFIG_DEBUG_FS) += clock-debug.o obj-$(CONFIG_MSM_VIC) += irq-vic.o obj-$(CONFIG_MSM_IOMMU) += devices-iommu.o -obj-$(CONFIG_ARCH_MSM7X00A) += dma.o irq.o acpuclock-arm11.o +obj-$(CONFIG_ARCH_MSM7X00A) += dma.o irq.o obj-$(CONFIG_ARCH_MSM7X30) += dma.o obj-$(CONFIG_ARCH_QSD8X50) += dma.o sirc.o diff --git a/arch/arm/mach-msm/acpuclock-arm11.c b/arch/arm/mach-msm/acpuclock-arm11.c deleted file mode 100644 index 805d4ee..0000000 --- a/arch/arm/mach-msm/acpuclock-arm11.c +++ /dev/null @@ -1,525 +0,0 @@ -/* arch/arm/mach-msm/acpuclock.c - * - * MSM architecture clock driver - * - * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2007 QUALCOMM Incorporated - * Author: San Mehat - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "proc_comm.h" -#include "acpuclock.h" - - -#define A11S_CLK_CNTL_ADDR (MSM_CSR_BASE + 0x100) -#define A11S_CLK_SEL_ADDR (MSM_CSR_BASE + 0x104) -#define A11S_VDD_SVS_PLEVEL_ADDR (MSM_CSR_BASE + 0x124) - -/* - * ARM11 clock configuration for specific ACPU speeds - */ - -#define ACPU_PLL_TCXO -1 -#define ACPU_PLL_0 0 -#define ACPU_PLL_1 1 -#define ACPU_PLL_2 2 -#define ACPU_PLL_3 3 - -#define PERF_SWITCH_DEBUG 0 -#define PERF_SWITCH_STEP_DEBUG 0 - -struct clock_state -{ - struct clkctl_acpu_speed *current_speed; - struct mutex lock; - uint32_t acpu_switch_time_us; - uint32_t max_speed_delta_khz; - uint32_t vdd_switch_time_us; - unsigned long power_collapse_khz; - unsigned long wait_for_irq_khz; -}; - -static struct clk *ebi1_clk; -static struct clock_state drv_state = { 0 }; - -static void __init acpuclk_init(void); - -/* MSM7201A Levels 3-6 all correspond to 1.2V, level 7 corresponds to 1.325V. */ -enum { - VDD_0 = 0, - VDD_1 = 1, - VDD_2 = 2, - VDD_3 = 3, - VDD_4 = 3, - VDD_5 = 3, - VDD_6 = 3, - VDD_7 = 7, - VDD_END -}; - -struct clkctl_acpu_speed { - unsigned int a11clk_khz; - int pll; - unsigned int a11clk_src_sel; - unsigned int a11clk_src_div; - unsigned int ahbclk_khz; - unsigned int ahbclk_div; - int vdd; - unsigned int axiclk_khz; - unsigned long lpj; /* loops_per_jiffy */ -/* Index in acpu_freq_tbl[] for steppings. */ - short down; - short up; -}; - -/* - * ACPU speed table. Complete table is shown but certain speeds are commented - * out to optimized speed switching. Initialize loops_per_jiffy to 0. - * - * Table stepping up/down is optimized for 256mhz jumps while staying on the - * same PLL. - */ -#if (0) -static struct clkctl_acpu_speed acpu_freq_tbl[] = { - { 19200, ACPU_PLL_TCXO, 0, 0, 19200, 0, VDD_0, 30720, 0, 0, 8 }, - { 61440, ACPU_PLL_0, 4, 3, 61440, 0, VDD_0, 30720, 0, 0, 8 }, - { 81920, ACPU_PLL_0, 4, 2, 40960, 1, VDD_0, 61440, 0, 0, 8 }, - { 96000, ACPU_PLL_1, 1, 7, 48000, 1, VDD_0, 61440, 0, 0, 9 }, - { 122880, ACPU_PLL_0, 4, 1, 61440, 1, VDD_3, 61440, 0, 0, 8 }, - { 128000, ACPU_PLL_1, 1, 5, 64000, 1, VDD_3, 61440, 0, 0, 12 }, - { 176000, ACPU_PLL_2, 2, 5, 88000, 1, VDD_3, 61440, 0, 0, 11 }, - { 192000, ACPU_PLL_1, 1, 3, 64000, 2, VDD_3, 61440, 0, 0, 12 }, - { 245760, ACPU_PLL_0, 4, 0, 81920, 2, VDD_4, 61440, 0, 0, 12 }, - { 256000, ACPU_PLL_1, 1, 2, 128000, 2, VDD_5, 128000, 0, 0, 12 }, - { 264000, ACPU_PLL_2, 2, 3, 88000, 2, VDD_5, 128000, 0, 6, 13 }, - { 352000, ACPU_PLL_2, 2, 2, 88000, 3, VDD_5, 128000, 0, 6, 13 }, - { 384000, ACPU_PLL_1, 1, 1, 128000, 2, VDD_6, 128000, 0, 5, -1 }, - { 528000, ACPU_PLL_2, 2, 1, 132000, 3, VDD_7, 128000, 0, 11, -1 }, - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, -}; -#else /* Table of freq we currently use. */ -static struct clkctl_acpu_speed acpu_freq_tbl[] = { - { 19200, ACPU_PLL_TCXO, 0, 0, 19200, 0, VDD_0, 30720, 0, 0, 4 }, - { 122880, ACPU_PLL_0, 4, 1, 61440, 1, VDD_3, 61440, 0, 0, 4 }, - { 128000, ACPU_PLL_1, 1, 5, 64000, 1, VDD_3, 61440, 0, 0, 6 }, - { 176000, ACPU_PLL_2, 2, 5, 88000, 1, VDD_3, 61440, 0, 0, 5 }, - { 245760, ACPU_PLL_0, 4, 0, 81920, 2, VDD_4, 61440, 0, 0, 5 }, - { 352000, ACPU_PLL_2, 2, 2, 88000, 3, VDD_5, 128000, 0, 3, 7 }, - { 384000, ACPU_PLL_1, 1, 1, 128000, 2, VDD_6, 128000, 0, 2, -1 }, - { 528000, ACPU_PLL_2, 2, 1, 132000, 3, VDD_7, 128000, 0, 5, -1 }, - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, -}; -#endif - - -#ifdef CONFIG_CPU_FREQ_TABLE -static struct cpufreq_frequency_table freq_table[] = { - { 0, 122880 }, - { 1, 128000 }, - { 2, 245760 }, - { 3, 384000 }, - { 4, 528000 }, - { 5, CPUFREQ_TABLE_END }, -}; -#endif - -static int pc_pll_request(unsigned id, unsigned on) -{ - int res; - on = !!on; - -#if PERF_SWITCH_DEBUG - if (on) - printk(KERN_DEBUG "Enabling PLL %d\n", id); - else - printk(KERN_DEBUG "Disabling PLL %d\n", id); -#endif - - res = msm_proc_comm(PCOM_CLKCTL_RPC_PLL_REQUEST, &id, &on); - if (res < 0) - return res; - -#if PERF_SWITCH_DEBUG - if (on) - printk(KERN_DEBUG "PLL %d enabled\n", id); - else - printk(KERN_DEBUG "PLL %d disabled\n", id); -#endif - return res; -} - - -/*---------------------------------------------------------------------------- - * ARM11 'owned' clock control - *---------------------------------------------------------------------------*/ - -unsigned long acpuclk_power_collapse(void) { - int ret = acpuclk_get_rate(); - ret *= 1000; - if (ret > drv_state.power_collapse_khz) - acpuclk_set_rate(drv_state.power_collapse_khz, 1); - return ret; -} - -unsigned long acpuclk_get_wfi_rate(void) -{ - return drv_state.wait_for_irq_khz; -} - -unsigned long acpuclk_wait_for_irq(void) { - int ret = acpuclk_get_rate(); - ret *= 1000; - if (ret > drv_state.wait_for_irq_khz) - acpuclk_set_rate(drv_state.wait_for_irq_khz, 1); - return ret; -} - -static int acpuclk_set_vdd_level(int vdd) -{ - uint32_t current_vdd; - - current_vdd = readl(A11S_VDD_SVS_PLEVEL_ADDR) & 0x07; - -#if PERF_SWITCH_DEBUG - printk(KERN_DEBUG "acpuclock: Switching VDD from %u -> %d\n", - current_vdd, vdd); -#endif - writel((1 << 7) | (vdd << 3), A11S_VDD_SVS_PLEVEL_ADDR); - udelay(drv_state.vdd_switch_time_us); - if ((readl(A11S_VDD_SVS_PLEVEL_ADDR) & 0x7) != vdd) { -#if PERF_SWITCH_DEBUG - printk(KERN_ERR "acpuclock: VDD set failed\n"); -#endif - return -EIO; - } - -#if PERF_SWITCH_DEBUG - printk(KERN_DEBUG "acpuclock: VDD switched\n"); -#endif - return 0; -} - -/* Set proper dividers for the given clock speed. */ -static void acpuclk_set_div(const struct clkctl_acpu_speed *hunt_s) { - uint32_t reg_clkctl, reg_clksel, clk_div; - - /* AHB_CLK_DIV */ - clk_div = (readl(A11S_CLK_SEL_ADDR) >> 1) & 0x03; - /* - * If the new clock divider is higher than the previous, then - * program the divider before switching the clock - */ - if (hunt_s->ahbclk_div > clk_div) { - reg_clksel = readl(A11S_CLK_SEL_ADDR); - reg_clksel &= ~(0x3 << 1); - reg_clksel |= (hunt_s->ahbclk_div << 1); - writel(reg_clksel, A11S_CLK_SEL_ADDR); - } - if ((readl(A11S_CLK_SEL_ADDR) & 0x01) == 0) { - /* SRC0 */ - - /* Program clock source */ - reg_clkctl = readl(A11S_CLK_CNTL_ADDR); - reg_clkctl &= ~(0x07 << 4); - reg_clkctl |= (hunt_s->a11clk_src_sel << 4); - writel(reg_clkctl, A11S_CLK_CNTL_ADDR); - - /* Program clock divider */ - reg_clkctl = readl(A11S_CLK_CNTL_ADDR); - reg_clkctl &= ~0xf; - reg_clkctl |= hunt_s->a11clk_src_div; - writel(reg_clkctl, A11S_CLK_CNTL_ADDR); - - /* Program clock source selection */ - reg_clksel = readl(A11S_CLK_SEL_ADDR); - reg_clksel |= 1; /* CLK_SEL_SRC1NO == SRC1 */ - writel(reg_clksel, A11S_CLK_SEL_ADDR); - } else { - /* SRC1 */ - - /* Program clock source */ - reg_clkctl = readl(A11S_CLK_CNTL_ADDR); - reg_clkctl &= ~(0x07 << 12); - reg_clkctl |= (hunt_s->a11clk_src_sel << 12); - writel(reg_clkctl, A11S_CLK_CNTL_ADDR); - - /* Program clock divider */ - reg_clkctl = readl(A11S_CLK_CNTL_ADDR); - reg_clkctl &= ~(0xf << 8); - reg_clkctl |= (hunt_s->a11clk_src_div << 8); - writel(reg_clkctl, A11S_CLK_CNTL_ADDR); - - /* Program clock source selection */ - reg_clksel = readl(A11S_CLK_SEL_ADDR); - reg_clksel &= ~1; /* CLK_SEL_SRC1NO == SRC0 */ - writel(reg_clksel, A11S_CLK_SEL_ADDR); - } - - /* - * If the new clock divider is lower than the previous, then - * program the divider after switching the clock - */ - if (hunt_s->ahbclk_div < clk_div) { - reg_clksel = readl(A11S_CLK_SEL_ADDR); - reg_clksel &= ~(0x3 << 1); - reg_clksel |= (hunt_s->ahbclk_div << 1); - writel(reg_clksel, A11S_CLK_SEL_ADDR); - } -} - -int acpuclk_set_rate(unsigned long rate, int for_power_collapse) -{ - uint32_t reg_clkctl; - struct clkctl_acpu_speed *cur_s, *tgt_s, *strt_s; - int rc = 0; - unsigned int plls_enabled = 0, pll; - - strt_s = cur_s = drv_state.current_speed; - - WARN_ONCE(cur_s == NULL, "acpuclk_set_rate: not initialized\n"); - if (cur_s == NULL) - return -ENOENT; - - if (rate == (cur_s->a11clk_khz * 1000)) - return 0; - - for (tgt_s = acpu_freq_tbl; tgt_s->a11clk_khz != 0; tgt_s++) { - if (tgt_s->a11clk_khz == (rate / 1000)) - break; - } - - if (tgt_s->a11clk_khz == 0) - return -EINVAL; - - /* Choose the highest speed speed at or below 'rate' with same PLL. */ - if (for_power_collapse && tgt_s->a11clk_khz < cur_s->a11clk_khz) { - while (tgt_s->pll != ACPU_PLL_TCXO && tgt_s->pll != cur_s->pll) - tgt_s--; - } - - if (strt_s->pll != ACPU_PLL_TCXO) - plls_enabled |= 1 << strt_s->pll; - - if (!for_power_collapse) { - mutex_lock(&drv_state.lock); - if (strt_s->pll != tgt_s->pll && tgt_s->pll != ACPU_PLL_TCXO) { - rc = pc_pll_request(tgt_s->pll, 1); - if (rc < 0) { - pr_err("PLL%d enable failed (%d)\n", - tgt_s->pll, rc); - goto out; - } - plls_enabled |= 1 << tgt_s->pll; - } - /* Increase VDD if needed. */ - if (tgt_s->vdd > cur_s->vdd) { - if ((rc = acpuclk_set_vdd_level(tgt_s->vdd)) < 0) { - printk(KERN_ERR "Unable to switch ACPU vdd\n"); - goto out; - } - } - } - - /* Set wait states for CPU between frequency changes */ - reg_clkctl = readl(A11S_CLK_CNTL_ADDR); - reg_clkctl |= (100 << 16); /* set WT_ST_CNT */ - writel(reg_clkctl, A11S_CLK_CNTL_ADDR); - -#if PERF_SWITCH_DEBUG - printk(KERN_INFO "acpuclock: Switching from ACPU rate %u -> %u\n", - strt_s->a11clk_khz * 1000, tgt_s->a11clk_khz * 1000); -#endif - - while (cur_s != tgt_s) { - /* - * Always jump to target freq if within 256mhz, regulardless of - * PLL. If differnece is greater, use the predefinied - * steppings in the table. - */ - int d = abs((int)(cur_s->a11clk_khz - tgt_s->a11clk_khz)); - if (d > drv_state.max_speed_delta_khz) { - /* Step up or down depending on target vs current. */ - int clk_index = tgt_s->a11clk_khz > cur_s->a11clk_khz ? - cur_s->up : cur_s->down; - if (clk_index < 0) { /* This should not happen. */ - printk(KERN_ERR "cur:%u target: %u\n", - cur_s->a11clk_khz, tgt_s->a11clk_khz); - rc = -EINVAL; - goto out; - } - cur_s = &acpu_freq_tbl[clk_index]; - } else { - cur_s = tgt_s; - } -#if PERF_SWITCH_STEP_DEBUG - printk(KERN_DEBUG "%s: STEP khz = %u, pll = %d\n", - __FUNCTION__, cur_s->a11clk_khz, cur_s->pll); -#endif - if (!for_power_collapse&& cur_s->pll != ACPU_PLL_TCXO - && !(plls_enabled & (1 << cur_s->pll))) { - rc = pc_pll_request(cur_s->pll, 1); - if (rc < 0) { - pr_err("PLL%d enable failed (%d)\n", - cur_s->pll, rc); - goto out; - } - plls_enabled |= 1 << cur_s->pll; - } - - acpuclk_set_div(cur_s); - drv_state.current_speed = cur_s; - /* Re-adjust lpj for the new clock speed. */ - loops_per_jiffy = cur_s->lpj; - udelay(drv_state.acpu_switch_time_us); - } - - /* Nothing else to do for power collapse. */ - if (for_power_collapse) - return 0; - - /* Disable PLLs we are not using anymore. */ - plls_enabled &= ~(1 << tgt_s->pll); - for (pll = ACPU_PLL_0; pll <= ACPU_PLL_2; pll++) - if (plls_enabled & (1 << pll)) { - rc = pc_pll_request(pll, 0); - if (rc < 0) { - pr_err("PLL%d disable failed (%d)\n", pll, rc); - goto out; - } - } - - /* Change the AXI bus frequency if we can. */ - if (strt_s->axiclk_khz != tgt_s->axiclk_khz) { - rc = clk_set_rate(ebi1_clk, tgt_s->axiclk_khz * 1000); - if (rc < 0) - pr_err("Setting AXI min rate failed!\n"); - } - - /* Drop VDD level if we can. */ - if (tgt_s->vdd < strt_s->vdd) { - if (acpuclk_set_vdd_level(tgt_s->vdd) < 0) - printk(KERN_ERR "acpuclock: Unable to drop ACPU vdd\n"); - } - -#if PERF_SWITCH_DEBUG - printk(KERN_DEBUG "%s: ACPU speed change complete\n", __FUNCTION__); -#endif -out: - if (!for_power_collapse) - mutex_unlock(&drv_state.lock); - return rc; -} - -static void __init acpuclk_init(void) -{ - struct clkctl_acpu_speed *speed; - uint32_t div, sel; - int rc; - - /* - * Determine the rate of ACPU clock - */ - - if (!(readl(A11S_CLK_SEL_ADDR) & 0x01)) { /* CLK_SEL_SRC1N0 */ - /* CLK_SRC0_SEL */ - sel = (readl(A11S_CLK_CNTL_ADDR) >> 12) & 0x7; - /* CLK_SRC0_DIV */ - div = (readl(A11S_CLK_CNTL_ADDR) >> 8) & 0x0f; - } else { - /* CLK_SRC1_SEL */ - sel = (readl(A11S_CLK_CNTL_ADDR) >> 4) & 0x07; - /* CLK_SRC1_DIV */ - div = readl(A11S_CLK_CNTL_ADDR) & 0x0f; - } - - for (speed = acpu_freq_tbl; speed->a11clk_khz != 0; speed++) { - if (speed->a11clk_src_sel == sel - && (speed->a11clk_src_div == div)) - break; - } - if (speed->a11clk_khz == 0) { - printk(KERN_WARNING "Warning - ACPU clock reports invalid speed\n"); - return; - } - - drv_state.current_speed = speed; - - rc = clk_set_rate(ebi1_clk, speed->axiclk_khz * 1000); - if (rc < 0) - pr_err("Setting AXI min rate failed!\n"); - - printk(KERN_INFO "ACPU running at %d KHz\n", speed->a11clk_khz); -} - -unsigned long acpuclk_get_rate(void) -{ - WARN_ONCE(drv_state.current_speed == NULL, - "acpuclk_get_rate: not initialized\n"); - if (drv_state.current_speed) - return drv_state.current_speed->a11clk_khz; - else - return 0; -} - -uint32_t acpuclk_get_switch_time(void) -{ - return drv_state.acpu_switch_time_us; -} - -/*---------------------------------------------------------------------------- - * Clock driver initialization - *---------------------------------------------------------------------------*/ - -/* Initialize the lpj field in the acpu_freq_tbl. */ -static void __init lpj_init(void) -{ - int i; - const struct clkctl_acpu_speed *base_clk = drv_state.current_speed; - for (i = 0; acpu_freq_tbl[i].a11clk_khz; i++) { - acpu_freq_tbl[i].lpj = cpufreq_scale(loops_per_jiffy, - base_clk->a11clk_khz, - acpu_freq_tbl[i].a11clk_khz); - } -} - -void __init msm_acpu_clock_init(struct msm_acpu_clock_platform_data *clkdata) -{ - pr_info("acpu_clock_init()\n"); - - ebi1_clk = clk_get(NULL, "ebi1_clk"); - - mutex_init(&drv_state.lock); - drv_state.acpu_switch_time_us = clkdata->acpu_switch_time_us; - drv_state.max_speed_delta_khz = clkdata->max_speed_delta_khz; - drv_state.vdd_switch_time_us = clkdata->vdd_switch_time_us; - drv_state.power_collapse_khz = clkdata->power_collapse_khz; - drv_state.wait_for_irq_khz = clkdata->wait_for_irq_khz; - acpuclk_init(); - lpj_init(); -#ifdef CONFIG_CPU_FREQ_TABLE - cpufreq_frequency_table_get_attr(freq_table, smp_processor_id()); -#endif -} diff --git a/arch/arm/mach-msm/acpuclock.h b/arch/arm/mach-msm/acpuclock.h deleted file mode 100644 index 415de2e..0000000 --- a/arch/arm/mach-msm/acpuclock.h +++ /dev/null @@ -1,32 +0,0 @@ -/* arch/arm/mach-msm/acpuclock.h - * - * MSM architecture clock driver header - * - * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2007 QUALCOMM Incorporated - * Author: San Mehat - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __ARCH_ARM_MACH_MSM_ACPUCLOCK_H -#define __ARCH_ARM_MACH_MSM_ACPUCLOCK_H - -int acpuclk_set_rate(unsigned long rate, int for_power_collapse); -unsigned long acpuclk_get_rate(void); -uint32_t acpuclk_get_switch_time(void); -unsigned long acpuclk_wait_for_irq(void); -unsigned long acpuclk_power_collapse(void); -unsigned long acpuclk_get_wfi_rate(void); - - -#endif - diff --git a/arch/arm/mach-msm/include/mach/board.h b/arch/arm/mach-msm/include/mach/board.h index 435f8ed..5a0811a 100644 --- a/arch/arm/mach-msm/include/mach/board.h +++ b/arch/arm/mach-msm/include/mach/board.h @@ -22,15 +22,6 @@ /* platform device data structures */ -struct msm_acpu_clock_platform_data -{ - uint32_t acpu_switch_time_us; - uint32_t max_speed_delta_khz; - uint32_t vdd_switch_time_us; - unsigned long power_collapse_khz; - unsigned long wait_for_irq_khz; -}; - struct clk_lookup; extern struct sys_timer msm_timer; @@ -42,7 +33,6 @@ void __init msm_map_common_io(void); void __init msm_init_irq(void); void __init msm_init_gpio(void); void __init msm_clock_init(struct clk_lookup *clock_tbl, unsigned num_clocks); -void __init msm_acpu_clock_init(struct msm_acpu_clock_platform_data *); int __init msm_add_sdcc(unsigned int controller, struct msm_mmc_platform_data *plat, unsigned int stat_irq, unsigned long stat_irq_flags); -- cgit v1.1 From e63770acb3c1e7334885ed4673aed1375f93484a Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Thu, 6 Sep 2012 19:50:02 -0700 Subject: ARM: msm: Remove uncompiled board-msm7x27 This board file has never been compiled. Let's just remove it along with the one Kconfig reference to it in io.c. Signed-off-by: Stephen Boyd Signed-off-by: David Brown --- arch/arm/mach-msm/board-msm7x27.c | 170 -------------------------------------- arch/arm/mach-msm/io.c | 3 +- 2 files changed, 1 insertion(+), 172 deletions(-) delete mode 100644 arch/arm/mach-msm/board-msm7x27.c (limited to 'arch') diff --git a/arch/arm/mach-msm/board-msm7x27.c b/arch/arm/mach-msm/board-msm7x27.c deleted file mode 100644 index 451ab1d..0000000 --- a/arch/arm/mach-msm/board-msm7x27.c +++ /dev/null @@ -1,170 +0,0 @@ -/* - * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved. - * Author: Brian Swetland - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#ifdef CONFIG_CACHE_L2X0 -#include -#endif - -#include -#include -#include -#include - -#include -#include - -#include "devices.h" -#include "socinfo.h" -#include "clock.h" - -static struct resource smc91x_resources[] = { - [0] = { - .start = 0x9C004300, - .end = 0x9C0043ff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = MSM_GPIO_TO_INT(132), - .end = MSM_GPIO_TO_INT(132), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device smc91x_device = { - .name = "smc91x", - .id = 0, - .num_resources = ARRAY_SIZE(smc91x_resources), - .resource = smc91x_resources, -}; - -static struct platform_device *devices[] __initdata = { - &msm_device_uart3, - &msm_device_smd, - &msm_device_dmov, - &msm_device_nand, - &smc91x_device, -}; - -extern struct sys_timer msm_timer; - -static void __init msm7x2x_init_irq(void) -{ - msm_init_irq(); -} - -static void __init msm7x2x_init(void) -{ - if (socinfo_init() < 0) - BUG(); - - if (machine_is_msm7x25_ffa() || machine_is_msm7x27_ffa()) { - smc91x_resources[0].start = 0x98000300; - smc91x_resources[0].end = 0x980003ff; - smc91x_resources[1].start = MSM_GPIO_TO_INT(85); - smc91x_resources[1].end = MSM_GPIO_TO_INT(85); - if (gpio_tlmm_config(GPIO_CFG(85, 0, - GPIO_INPUT, - GPIO_PULL_DOWN, - GPIO_2MA), - GPIO_ENABLE)) { - printk(KERN_ERR - "%s: Err: Config GPIO-85 INT\n", - __func__); - } - } - - platform_add_devices(devices, ARRAY_SIZE(devices)); -} - -static void __init msm7x2x_map_io(void) -{ - msm_map_common_io(); - /* Technically dependent on the SoC but using machine_is - * macros since socinfo is not available this early and there - * are plans to restructure the code which will eliminate the - * need for socinfo. - */ - if (machine_is_msm7x27_surf() || machine_is_msm7x27_ffa()) - msm_clock_init(msm_clocks_7x27, msm_num_clocks_7x27); - - if (machine_is_msm7x25_surf() || machine_is_msm7x25_ffa()) - msm_clock_init(msm_clocks_7x25, msm_num_clocks_7x25); - -#ifdef CONFIG_CACHE_L2X0 - if (machine_is_msm7x27_surf() || machine_is_msm7x27_ffa()) { - /* 7x27 has 256KB L2 cache: - 64Kb/Way and 4-Way Associativity; - R/W latency: 3 cycles; - evmon/parity/share disabled. */ - l2x0_init(MSM_L2CC_BASE, 0x00068012, 0xfe000000); - } -#endif -} - -static void __init msm7x2x_init_late(void) -{ - smd_debugfs_init(); -} - -MACHINE_START(MSM7X27_SURF, "QCT MSM7x27 SURF") - .atag_offset = 0x100, - .map_io = msm7x2x_map_io, - .init_irq = msm7x2x_init_irq, - .init_machine = msm7x2x_init, - .init_late = msm7x2x_init_late, - .timer = &msm_timer, -MACHINE_END - -MACHINE_START(MSM7X27_FFA, "QCT MSM7x27 FFA") - .atag_offset = 0x100, - .map_io = msm7x2x_map_io, - .init_irq = msm7x2x_init_irq, - .init_machine = msm7x2x_init, - .init_late = msm7x2x_init_late, - .timer = &msm_timer, -MACHINE_END - -MACHINE_START(MSM7X25_SURF, "QCT MSM7x25 SURF") - .atag_offset = 0x100, - .map_io = msm7x2x_map_io, - .init_irq = msm7x2x_init_irq, - .init_machine = msm7x2x_init, - .init_late = msm7x2x_init_late, - .timer = &msm_timer, -MACHINE_END - -MACHINE_START(MSM7X25_FFA, "QCT MSM7x25 FFA") - .atag_offset = 0x100, - .map_io = msm7x2x_map_io, - .init_irq = msm7x2x_init_irq, - .init_machine = msm7x2x_init, - .init_late = msm7x2x_init_late, - .timer = &msm_timer, -MACHINE_END diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c index a1e7b11..9704233 100644 --- a/arch/arm/mach-msm/io.c +++ b/arch/arm/mach-msm/io.c @@ -38,8 +38,7 @@ #define MSM_DEVICE(name) MSM_CHIP_DEVICE(name, MSM) -#if defined(CONFIG_ARCH_MSM7X00A) || defined(CONFIG_ARCH_MSM7X27) \ - || defined(CONFIG_ARCH_MSM7X25) +#if defined(CONFIG_ARCH_MSM7X00A) static struct map_desc msm_io_desc[] __initdata = { MSM_DEVICE(VIC), MSM_CHIP_DEVICE(CSR, MSM7X00), -- cgit v1.1