From e06003af56c386018f0c209608ac6c6662228cc0 Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten <hartleys@visionengravers.com> Date: Sat, 18 Apr 2009 23:43:57 -0700 Subject: Input: add matrix keypad driver for Cirrus EP93xx This is a keyboard driver for the Cirrus Logic EP93xx keypad matrix peripheral. This driver is based on the pxa27x_keypad driver. [dtor@mail.ru: Plug in input_dev->keycode so keymap can be changed from userspace.] Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> --- arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h | 42 +++++++++++++++++++++++ 1 file changed, 42 insertions(+) create mode 100644 arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h (limited to 'arch') diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h b/arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h new file mode 100644 index 0000000..83f31cd --- /dev/null +++ b/arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h @@ -0,0 +1,42 @@ +/* + * arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h + */ + +#ifndef __ASM_ARCH_EP93XX_KEYPAD_H +#define __ASM_ARCH_EP93XX_KEYPAD_H + +#define MAX_MATRIX_KEY_ROWS (8) +#define MAX_MATRIX_KEY_COLS (8) + +/* flags for the ep93xx_keypad driver */ +#define EP93XX_KEYPAD_DISABLE_3_KEY (1<<0) /* disable 3-key reset */ +#define EP93XX_KEYPAD_DIAG_MODE (1<<1) /* diagnostic mode */ +#define EP93XX_KEYPAD_BACK_DRIVE (1<<2) /* back driving mode */ +#define EP93XX_KEYPAD_TEST_MODE (1<<3) /* scan only column 0 */ +#define EP93XX_KEYPAD_KDIV (1<<4) /* 1/4 clock or 1/16 clock */ +#define EP93XX_KEYPAD_AUTOREPEAT (1<<5) /* enable key autorepeat */ + +/** + * struct ep93xx_keypad_platform_data - platform specific device structure + * @matrix_key_rows: number of rows in the keypad matrix + * @matrix_key_cols: number of columns in the keypad matrix + * @matrix_key_map: array of keycodes defining the keypad matrix + * @matrix_key_map_size: ARRAY_SIZE(matrix_key_map) + * @debounce: debounce start count; terminal count is 0xff + * @prescale: row/column counter pre-scaler load value + * @flags: see above + */ +struct ep93xx_keypad_platform_data { + unsigned int matrix_key_rows; + unsigned int matrix_key_cols; + unsigned int *matrix_key_map; + int matrix_key_map_size; + unsigned int debounce; + unsigned int prescale; + unsigned int flags; +}; + +/* macro for creating the matrix_key_map table */ +#define KEY(row, col, val) (((row) << 28) | ((col) << 24) | (val)) + +#endif /* __ASM_ARCH_EP93XX_KEYPAD_H */ -- cgit v1.1 From 4ed0d3e6c64cfd9ba4ceb2099b10d1cf8ece4320 Mon Sep 17 00:00:00 2001 From: Fenghua Yu <fenghua.yu@intel.com> Date: Fri, 24 Apr 2009 17:30:20 -0700 Subject: Intel IOMMU Pass Through Support The patch adds kernel parameter intel_iommu=pt to set up pass through mode in context mapping entry. This disables DMAR in linux kernel; but KVM still runs on VT-d and interrupt remapping still works. In this mode, kernel uses swiotlb for DMA API functions but other VT-d functionalities are enabled for KVM. KVM always uses multi level translation page table in VT-d. By default, pass though mode is disabled in kernel. This is useful when people don't want to enable VT-d DMAR in kernel but still want to use KVM and interrupt remapping for reasons like DMAR performance concern or debug purpose. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Acked-by: Weidong Han <weidong@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> --- arch/ia64/include/asm/iommu.h | 1 + arch/ia64/kernel/pci-swiotlb.c | 2 +- arch/x86/include/asm/iommu.h | 1 + arch/x86/kernel/pci-dma.c | 6 ++++++ arch/x86/kernel/pci-swiotlb.c | 3 ++- 5 files changed, 11 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/ia64/include/asm/iommu.h b/arch/ia64/include/asm/iommu.h index 0490794..37d41ca 100644 --- a/arch/ia64/include/asm/iommu.h +++ b/arch/ia64/include/asm/iommu.h @@ -9,6 +9,7 @@ extern void pci_iommu_shutdown(void); extern void no_iommu_init(void); extern int force_iommu, no_iommu; extern int iommu_detected; +extern int iommu_pass_through; extern void iommu_dma_init(void); extern void machvec_init(const char *name); diff --git a/arch/ia64/kernel/pci-swiotlb.c b/arch/ia64/kernel/pci-swiotlb.c index 285aae8..223abb1 100644 --- a/arch/ia64/kernel/pci-swiotlb.c +++ b/arch/ia64/kernel/pci-swiotlb.c @@ -46,7 +46,7 @@ void __init swiotlb_dma_init(void) void __init pci_swiotlb_init(void) { - if (!iommu_detected) { + if (!iommu_detected || iommu_pass_through) { #ifdef CONFIG_IA64_GENERIC swiotlb = 1; printk(KERN_INFO "PCI-DMA: Re-initialize machine vector.\n"); diff --git a/arch/x86/include/asm/iommu.h b/arch/x86/include/asm/iommu.h index af326a2..fd6d21b 100644 --- a/arch/x86/include/asm/iommu.h +++ b/arch/x86/include/asm/iommu.h @@ -6,6 +6,7 @@ extern void no_iommu_init(void); extern struct dma_map_ops nommu_dma_ops; extern int force_iommu, no_iommu; extern int iommu_detected; +extern int iommu_pass_through; /* 10 seconds */ #define DMAR_OPERATION_TIMEOUT ((cycles_t) tsc_khz*10*1000) diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c index 745579b..8cad0d8 100644 --- a/arch/x86/kernel/pci-dma.c +++ b/arch/x86/kernel/pci-dma.c @@ -160,6 +160,8 @@ again: return page_address(page); } +extern int iommu_pass_through; + /* * See <Documentation/x86_64/boot-options.txt> for the iommu kernel parameter * documentation. @@ -209,6 +211,10 @@ static __init int iommu_setup(char *p) #ifdef CONFIG_SWIOTLB if (!strncmp(p, "soft", 4)) swiotlb = 1; + if (!strncmp(p, "pt", 2)) { + iommu_pass_through = 1; + return 1; + } #endif gart_parse_options(p); diff --git a/arch/x86/kernel/pci-swiotlb.c b/arch/x86/kernel/pci-swiotlb.c index 221a385..3a0c51e 100644 --- a/arch/x86/kernel/pci-swiotlb.c +++ b/arch/x86/kernel/pci-swiotlb.c @@ -71,7 +71,8 @@ void __init pci_swiotlb_init(void) { /* don't initialize swiotlb if iommu=off (no_iommu=1) */ #ifdef CONFIG_X86_64 - if (!iommu_detected && !no_iommu && max_pfn > MAX_DMA32_PFN) + if ((!iommu_detected && !no_iommu && max_pfn > MAX_DMA32_PFN) || + iommu_pass_through) swiotlb = 1; #endif if (swiotlb_force) -- cgit v1.1 From aed5d5f4c5ea5da01a774e42cff08c4b4fa59072 Mon Sep 17 00:00:00 2001 From: Fenghua Yu <fenghua.yu@intel.com> Date: Thu, 30 Apr 2009 17:57:11 -0700 Subject: Fix !CONFIG_DMAR build failure introduced by Intel IOMMU Pass Through Support This updated patch should fix the compiling errors and remove the extern iommu_pass_through from drivers/pci/intel-iommu.c file. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> --- arch/ia64/kernel/pci-dma.c | 2 ++ arch/x86/kernel/pci-dma.c | 4 ++-- 2 files changed, 4 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/pci-dma.c b/arch/ia64/kernel/pci-dma.c index eb98738..ecdde25 100644 --- a/arch/ia64/kernel/pci-dma.c +++ b/arch/ia64/kernel/pci-dma.c @@ -32,6 +32,8 @@ int force_iommu __read_mostly = 1; int force_iommu __read_mostly; #endif +int iommu_pass_through; + /* Dummy device used for NULL arguments (normally ISA). Better would be probably a smaller DMA mask, but this is bug-to-bug compatible to i386. */ diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c index 8cad0d8..049005e 100644 --- a/arch/x86/kernel/pci-dma.c +++ b/arch/x86/kernel/pci-dma.c @@ -32,6 +32,8 @@ int no_iommu __read_mostly; /* Set this to 1 if there is a HW IOMMU in the system */ int iommu_detected __read_mostly = 0; +int iommu_pass_through; + dma_addr_t bad_dma_address __read_mostly = 0; EXPORT_SYMBOL(bad_dma_address); @@ -160,8 +162,6 @@ again: return page_address(page); } -extern int iommu_pass_through; - /* * See <Documentation/x86_64/boot-options.txt> for the iommu kernel parameter * documentation. -- cgit v1.1 From ee1ca48fae7e575d5e399d4fdcfe0afc1212a64c Mon Sep 17 00:00:00 2001 From: "Pallipadi, Venkatesh" <venkatesh.pallipadi@intel.com> Date: Thu, 21 May 2009 17:09:10 -0700 Subject: ACPI: Disable ARB_DISABLE on platforms where it is not needed ARB_DISABLE is a NOP on all of the recent Intel platforms. For such platforms, reduce contention on c3_lock by skipping the fake ARB_DISABLE. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> --- arch/x86/kernel/acpi/cstate.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/acpi/cstate.c b/arch/x86/kernel/acpi/cstate.c index bbbe4bb..8c44c23 100644 --- a/arch/x86/kernel/acpi/cstate.c +++ b/arch/x86/kernel/acpi/cstate.c @@ -34,12 +34,22 @@ void acpi_processor_power_init_bm_check(struct acpi_processor_flags *flags, flags->bm_check = 1; else if (c->x86_vendor == X86_VENDOR_INTEL) { /* - * Today all CPUs that support C3 share cache. - * TBD: This needs to look at cache shared map, once - * multi-core detection patch makes to the base. + * Today all MP CPUs that support C3 share cache. + * And caches should not be flushed by software while + * entering C3 type state. */ flags->bm_check = 1; } + + /* + * On all recent Intel platforms, ARB_DISABLE is a nop. + * So, set bm_control to zero to indicate that ARB_DISABLE + * is not required while entering C3 type state on + * P4, Core and beyond CPUs + */ + if (c->x86_vendor == X86_VENDOR_INTEL && + (c->x86 > 0x6 || (c->x86 == 6 && c->x86_model >= 14))) + flags->bm_control = 0; } EXPORT_SYMBOL(acpi_processor_power_init_bm_check); -- cgit v1.1 From fb6ea3258742f41be8dd527ebd58a1a1e2cef23a Mon Sep 17 00:00:00 2001 From: Nelson Castillo <arhuaco@freaks-unidos.net> Date: Sun, 10 May 2009 15:41:32 -0500 Subject: [MTD] [NAND] S3C2410: Small colon cleanup checkpatch would complain with "disable_ecc : 1". Signed-off-by: Nelson Castillo <arhuaco@freaks-unidos.net> [ben-linux@fluff.org: subject cleanup] Signed-off-by: Ben Dooks <ben-linux@fluff.org> --- arch/arm/plat-s3c/include/plat/nand.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-s3c/include/plat/nand.h b/arch/arm/plat-s3c/include/plat/nand.h index f4dcd14..9855467 100644 --- a/arch/arm/plat-s3c/include/plat/nand.h +++ b/arch/arm/plat-s3c/include/plat/nand.h @@ -22,7 +22,7 @@ */ struct s3c2410_nand_set { - unsigned int disable_ecc : 1; + unsigned int disable_ecc:1; int nr_chips; int nr_partitions; @@ -39,7 +39,7 @@ struct s3c2410_platform_nand { int twrph0; /* active time for nWE/nOE */ int twrph1; /* time for release CLE/ALE from nWE/nOE inactive */ - unsigned int ignore_unset_ecc : 1; + unsigned int ignore_unset_ecc:1; int nr_sets; struct s3c2410_nand_set *sets; -- cgit v1.1 From 6a4123e581b3112ff4ea7439ab9ae5cb271a9dbd Mon Sep 17 00:00:00 2001 From: David Brownell <dbrownell@users.sourceforge.net> Date: Tue, 21 Apr 2009 19:58:13 -0700 Subject: mtd: nand: davinci_nand, 4-bit ECC for smallpage Minimal support for the 4-bit ECC engine found on DM355, DM365, DA830/OMAP-L137, and similar recent DaVinci-family chips. This is limited to small-page flash for now; there are some page layout issues for large page chips. Note that most boards using this engine (like the DM355 EVM) include 2GiB large page chips. Sanity tested on DM355 EVM after swapping the socketed NAND for a small-page one. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> --- arch/arm/mach-davinci/include/mach/nand.h | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-davinci/include/mach/nand.h b/arch/arm/mach-davinci/include/mach/nand.h index aa48284..b520c4b 100644 --- a/arch/arm/mach-davinci/include/mach/nand.h +++ b/arch/arm/mach-davinci/include/mach/nand.h @@ -68,10 +68,14 @@ struct davinci_nand_pdata { /* platform_data */ /* none == NAND_ECC_NONE (strongly *not* advised!!) * soft == NAND_ECC_SOFT - * 1-bit == NAND_ECC_HW - * 4-bit == NAND_ECC_HW_SYNDROME (not on all chips) + * else == NAND_ECC_HW, according to ecc_bits + * + * All DaVinci-family chips support 1-bit hardware ECC. + * Newer ones also support 4-bit ECC, but are awkward + * using it with large page chips. */ nand_ecc_modes_t ecc_mode; + u8 ecc_bits; /* e.g. NAND_BUSWIDTH_16 or NAND_USE_FLASH_BBT */ unsigned options; -- cgit v1.1 From 008fe148cb0fb51d266baabe2c09997b21cf90c6 Mon Sep 17 00:00:00 2001 From: "Luck, Tony" <tony.luck@intel.com> Date: Tue, 26 May 2009 15:45:12 -0700 Subject: intel-iommu: Fix one last ia64 build problem in Pass Through Support On ia64 with CONFIG_DMAR=n and CONFIG_SWIOTLB=y (as used in arch/ia64/configs/tiger_defconfig) there is still a link error with iommu_pass_through listed as an undefined symbol: arch/ia64/kernel/built-in.o: In function `pci_swiotlb_init': (.init.text+0x7f70): undefined reference to `iommu_pass_through' Fix it by #defining iommu_pass_through away in asm/iommu.h Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> --- arch/ia64/include/asm/iommu.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/ia64/include/asm/iommu.h b/arch/ia64/include/asm/iommu.h index 37d41ca..745e095 100644 --- a/arch/ia64/include/asm/iommu.h +++ b/arch/ia64/include/asm/iommu.h @@ -9,7 +9,11 @@ extern void pci_iommu_shutdown(void); extern void no_iommu_init(void); extern int force_iommu, no_iommu; extern int iommu_detected; +#ifdef CONFIG_DMAR extern int iommu_pass_through; +#else +#define iommu_pass_through (0) +#endif extern void iommu_dma_init(void); extern void machvec_init(const char *name); -- cgit v1.1 From b0903ee8e4853eea35cb24cfb4dda1b60c7948dc Mon Sep 17 00:00:00 2001 From: Roel Kluin <roel.kluin@gmail.com> Date: Mon, 8 Jun 2009 13:04:43 +0200 Subject: CRIS: assignment/is equal confusion Somehow, the assignments of rw->lock got written as comparisons. The effect probably was that the read-write spinlocks never locked. However, since the locks are only used in CONFIG_SMP and SMP CRIS is experimental, it has never been identified as a problem. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> --- arch/cris/include/arch-v32/arch/spinlock.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/cris/include/arch-v32/arch/spinlock.h b/arch/cris/include/arch-v32/arch/spinlock.h index 129756b..367a53e 100644 --- a/arch/cris/include/arch-v32/arch/spinlock.h +++ b/arch/cris/include/arch-v32/arch/spinlock.h @@ -78,7 +78,7 @@ static inline void __raw_write_lock(raw_rwlock_t *rw) { __raw_spin_lock(&rw->slock); while (rw->lock != RW_LOCK_BIAS); - rw->lock == 0; + rw->lock = 0; __raw_spin_unlock(&rw->slock); } @@ -93,7 +93,7 @@ static inline void __raw_write_unlock(raw_rwlock_t *rw) { __raw_spin_lock(&rw->slock); while (rw->lock != RW_LOCK_BIAS); - rw->lock == RW_LOCK_BIAS; + rw->lock = RW_LOCK_BIAS; __raw_spin_unlock(&rw->slock); } @@ -114,7 +114,7 @@ static inline int __raw_write_trylock(raw_rwlock_t *rw) int ret = 0; __raw_spin_lock(&rw->slock); if (rw->lock == RW_LOCK_BIAS) { - rw->lock == 0; + rw->lock = 0; ret = 1; } __raw_spin_unlock(&rw->slock); -- cgit v1.1 From a4536b19df92adda215f6fc225b52dc4cee4cf83 Mon Sep 17 00:00:00 2001 From: Michel Pollet <buserror@gmail.com> Date: Wed, 13 May 2009 16:54:13 +0100 Subject: [MTD] [NAND] S3C2410: Added a kerneldoc for s3c2410_nand_set Converted the old comnent to kerneldoc. Signed-off-by: Michel Pollet <buserror@gmail.com> [ben-linux@fluff.org: updated subject, spello fix] Signed-off-by: Ben Dooks <ben-linux@fluff.org> --- arch/arm/plat-s3c/include/plat/nand.h | 22 ++++++++++++---------- 1 file changed, 12 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-s3c/include/plat/nand.h b/arch/arm/plat-s3c/include/plat/nand.h index 9855467..9356516 100644 --- a/arch/arm/plat-s3c/include/plat/nand.h +++ b/arch/arm/plat-s3c/include/plat/nand.h @@ -10,17 +10,19 @@ * published by the Free Software Foundation. */ -/* struct s3c2410_nand_set +/** + * struct s3c2410_nand_set - define a set of one or more nand chips + * @disable_ecc: Entirely disable ECC - Dangerous + * @nr_chips: Number of chips in this set + * @nr_partitions: Number of partitions pointed to by @partitions + * @name: Name of set (optional) + * @nr_map: Map for low-layer logical to physical chip numbers (option) + * @partitions: The mtd partition list * - * define an set of one or more nand chips registered with an unique mtd - * - * nr_chips = number of chips in this set - * nr_partitions = number of partitions pointed to be partitoons (or zero) - * name = name of set (optional) - * nr_map = map for low-layer logical to physical chip numbers (option) - * partitions = mtd partition list -*/ - + * define a set of one or more nand chips registered with an unique mtd. Also + * allows to pass flag to the underlying NAND layer. 'disable_ecc' will trigger + * a warning at boot time. + */ struct s3c2410_nand_set { unsigned int disable_ecc:1; -- cgit v1.1 From 9db41f9edcb87ae050fcb171c44be7f212728d54 Mon Sep 17 00:00:00 2001 From: Michel Pollet <buserror@gmail.com> Date: Wed, 13 May 2009 16:54:14 +0100 Subject: [MTD] [NAND] S3C2410: Allow the machine code to get the BBT table from NAND Added a flag to allow the machine code to tell the NAND subsystem that it should try to pickup a BBT from the flash, and also skip the NAND full scan at startup. Signed-off-by: Michel Pollet <buserror@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> --- arch/arm/plat-s3c/include/plat/nand.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/arm/plat-s3c/include/plat/nand.h b/arch/arm/plat-s3c/include/plat/nand.h index 9356516..18f9588 100644 --- a/arch/arm/plat-s3c/include/plat/nand.h +++ b/arch/arm/plat-s3c/include/plat/nand.h @@ -13,6 +13,10 @@ /** * struct s3c2410_nand_set - define a set of one or more nand chips * @disable_ecc: Entirely disable ECC - Dangerous + * @flash_bbt: Openmoko u-boot can create a Bad Block Table + * Setting this flag will allow the kernel to + * look for it at boot time and also skip the NAND + * scan. * @nr_chips: Number of chips in this set * @nr_partitions: Number of partitions pointed to by @partitions * @name: Name of set (optional) @@ -25,6 +29,7 @@ */ struct s3c2410_nand_set { unsigned int disable_ecc:1; + unsigned int flash_bbt:1; int nr_chips; int nr_partitions; -- cgit v1.1 From 7f2ff23db1de53ea8695bb4a7c1cfab88886e3fd Mon Sep 17 00:00:00 2001 From: Jesper Nilsson <jesper.nilsson@axis.com> Date: Wed, 10 Jun 2009 15:06:55 +0200 Subject: CRISv32: Add arch optimized strcmp. Add an optimized strcmp for CRISv32. This improves strcmp performance with about 25% when comparing a 55 character string with itself. Signed-off-by: Edgar Iglesias <edgar@axis.com> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> --- arch/cris/arch-v32/lib/Makefile | 2 +- arch/cris/arch-v32/lib/strcmp.S | 21 +++++++++++++++++++++ arch/cris/include/asm/string.h | 6 ++++++ 3 files changed, 28 insertions(+), 1 deletion(-) create mode 100644 arch/cris/arch-v32/lib/strcmp.S (limited to 'arch') diff --git a/arch/cris/arch-v32/lib/Makefile b/arch/cris/arch-v32/lib/Makefile index eb4aad1..dd296b9 100644 --- a/arch/cris/arch-v32/lib/Makefile +++ b/arch/cris/arch-v32/lib/Makefile @@ -3,5 +3,5 @@ # lib-y = checksum.o checksumcopy.o string.o usercopy.o memset.o \ - csumcpfruser.o spinlock.o delay.o + csumcpfruser.o spinlock.o delay.o strcmp.o diff --git a/arch/cris/arch-v32/lib/strcmp.S b/arch/cris/arch-v32/lib/strcmp.S new file mode 100644 index 0000000..8f7a1ee --- /dev/null +++ b/arch/cris/arch-v32/lib/strcmp.S @@ -0,0 +1,21 @@ +; strcmp.S -- CRISv32 version. +; Copyright (C) 2008 AXIS Communications AB +; Written by Edgar E. Iglesias +; +; This source code is licensed under the GNU General Public License, +; Version 2. See the file COPYING for more details. + + .global strcmp + .type strcmp,@function +strcmp: +1: + move.b [$r10+], $r12 + seq $r13 + sub.b [$r11+], $r12 + or.b $r12, $r13 + beq 1b + nop + + ret + movs.b $r12, $r10 + .size strcmp, . - strcmp diff --git a/arch/cris/include/asm/string.h b/arch/cris/include/asm/string.h index 691190e..d5db39f 100644 --- a/arch/cris/include/asm/string.h +++ b/arch/cris/include/asm/string.h @@ -11,4 +11,10 @@ extern void *memcpy(void *, const void *, size_t); #define __HAVE_ARCH_MEMSET extern void *memset(void *, int, size_t); +#ifdef CONFIG_ETRAX_ARCH_V32 +/* For v32 we provide strcmp. */ +#define __HAVE_ARCH_STRCMP +extern int strcmp(const char *s1, const char *s2); +#endif + #endif -- cgit v1.1 From 7780b6a2990e2fbb697bb900e01ca7361943c7da Mon Sep 17 00:00:00 2001 From: Matt Fleming <matt@console-pimps.org> Date: Thu, 11 Jun 2009 09:26:43 +0100 Subject: sh: Update my email address Use my current email address as my gentoo account will be closed at some point. Signed-off-by: Matt Fleming <matt@console-pimps.org> --- arch/sh/kernel/ftrace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sh/kernel/ftrace.c b/arch/sh/kernel/ftrace.c index 4c32474..040cdc6 100644 --- a/arch/sh/kernel/ftrace.c +++ b/arch/sh/kernel/ftrace.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2008 Matt Fleming <mjf@gentoo.org> + * Copyright (C) 2008 Matt Fleming <matt@console-pimps.org> * Copyright (C) 2008 Paul Mundt <lethal@linux-sh.org> * * Code for replacing ftrace calls with jumps. -- cgit v1.1 From 91a120d03fd901fc8b95e85af7903358c5862d65 Mon Sep 17 00:00:00 2001 From: Jesper Nilsson <jesper.nilsson@axis.com> Date: Thu, 11 Jun 2009 19:09:00 +0200 Subject: CRISv32: Fix potential null reference in cryptocop driver. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The code didn't test the pointer to the newly allocated memory, but a parameter sent in as value. Since the input parameter was most often set, the code would have used a null pointer if the kmalloc failed. If the input parameter was not set, the code would leak the allocated buffer. http://bugzilla.kernel.org/show_bug.cgi?id=11363 Reported-by: Daniel Marjamäki <danielm77@spray.se> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> --- arch/cris/arch-v32/drivers/cryptocop.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/cris/arch-v32/drivers/cryptocop.c b/arch/cris/arch-v32/drivers/cryptocop.c index 67c61ea..fd529a0 100644 --- a/arch/cris/arch-v32/drivers/cryptocop.c +++ b/arch/cris/arch-v32/drivers/cryptocop.c @@ -1395,7 +1395,7 @@ static int create_md5_pad(int alloc_flag, unsigned long long hashed_length, char if (padlen < MD5_MIN_PAD_LENGTH) padlen += MD5_BLOCK_LENGTH; p = kmalloc(padlen, alloc_flag); - if (!pad) return -ENOMEM; + if (!p) return -ENOMEM; *p = 0x80; memset(p+1, 0, padlen - 1); @@ -1427,7 +1427,7 @@ static int create_sha1_pad(int alloc_flag, unsigned long long hashed_length, cha if (padlen < SHA1_MIN_PAD_LENGTH) padlen += SHA1_BLOCK_LENGTH; p = kmalloc(padlen, alloc_flag); - if (!pad) return -ENOMEM; + if (!p) return -ENOMEM; *p = 0x80; memset(p+1, 0, padlen - 1); -- cgit v1.1 From 768c31495abe49227a96261b5aa19f34b30882b1 Mon Sep 17 00:00:00 2001 From: Jesper Nilsson <jesper.nilsson@axis.com> Date: Wed, 10 Jun 2009 11:45:47 +0200 Subject: CRISv32: irq.c - Move end brace outside #endif The end brace for a larger for statement was placed inside the #else part of #ifdef TIMER_VECT1. However, for all current chips, the define TIMER_VECT1 is always unset, and the error was never triggered. Move the brace down below the #endif. Fixes: http://bugzilla.kernel.org/show_bug.cgi?id=13476 Reported-by: Martin Ettl <ettl.martin@gmx.de> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Mikael Starvik <mikael.starvik@axis.com> --- arch/cris/arch-v32/kernel/irq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/cris/arch-v32/kernel/irq.c b/arch/cris/arch-v32/kernel/irq.c index df3925c..9c9eb5b 100644 --- a/arch/cris/arch-v32/kernel/irq.c +++ b/arch/cris/arch-v32/kernel/irq.c @@ -428,8 +428,8 @@ crisv32_do_multiple(struct pt_regs* regs) masked[i] &= ~TIMER_MASK; do_IRQ(TIMER0_INTR_VECT, regs); } - } #endif + } #ifdef IGNORE_MASK /* Remove IRQs that can't be handled as multiple. */ -- cgit v1.1 From 9e28c46b7dd116a607ffb054c5545c468c77d779 Mon Sep 17 00:00:00 2001 From: Matt Fleming <matt@console-pimps.org> Date: Wed, 10 Jun 2009 22:07:53 +0100 Subject: sh: Fix dynamic ftrace's NOP action. Ftrace on sh handles nop'ing out trace function calls differently than other architectures. Instead of inserting NOP instructions in place of the call to the function tracer we branch over the call instructions and continue executing the main body of the function. This patch fixes a bug in the implementation of ftrace_modify_code() where we check that the old value of the code we're about to replace is an expected one. In the ftrace_make_call() code path ftrace_modify_code() was comparing the old instruction value with NOP instructions. The compare was failing because we never actually insert NOP instructions. It makes sense to just get rid of the NOP instructions in ftrace_nop and compare the old code with the address of the function body if we're expecting ftrace to have nop'd out the function trace call. Signed-off-by: Matt Fleming <matt@console-pimps.org> --- arch/sh/kernel/ftrace.c | 58 ++++++++++++++++++++++++------------------------- 1 file changed, 29 insertions(+), 29 deletions(-) (limited to 'arch') diff --git a/arch/sh/kernel/ftrace.c b/arch/sh/kernel/ftrace.c index 040cdc6..066f37d 100644 --- a/arch/sh/kernel/ftrace.c +++ b/arch/sh/kernel/ftrace.c @@ -19,30 +19,37 @@ #include <asm/ftrace.h> #include <asm/cacheflush.h> -static unsigned char ftrace_nop[] = { - 0x09, 0x00, /* nop */ - 0x09, 0x00, /* nop */ -}; - static unsigned char ftrace_replaced_code[MCOUNT_INSN_SIZE]; -unsigned char *ftrace_nop_replace(void) +static unsigned char ftrace_nop[4]; +/* + * If we're trying to nop out a call to a function, we instead + * place a call to the address after the memory table. + * + * 8c011060 <a>: + * 8c011060: 02 d1 mov.l 8c01106c <a+0xc>,r1 + * 8c011062: 22 4f sts.l pr,@-r15 + * 8c011064: 02 c7 mova 8c011070 <a+0x10>,r0 + * 8c011066: 2b 41 jmp @r1 + * 8c011068: 2a 40 lds r0,pr + * 8c01106a: 09 00 nop + * 8c01106c: 68 24 .word 0x2468 <--- ip + * 8c01106e: 1d 8c .word 0x8c1d + * 8c011070: 26 4f lds.l @r15+,pr <--- ip + MCOUNT_INSN_SIZE + * + * We write 0x8c011070 to 0x8c01106c so that on entry to a() we branch + * past the _mcount call and continue executing code like normal. + */ +static unsigned char *ftrace_nop_replace(unsigned long ip) { + __raw_writel(ip + MCOUNT_INSN_SIZE, ftrace_nop); return ftrace_nop; } -static int is_sh_nop(unsigned char *ip) -{ - return strncmp(ip, ftrace_nop, sizeof(ftrace_nop)); -} - -unsigned char *ftrace_call_replace(unsigned long ip, unsigned long addr) +static unsigned char *ftrace_call_replace(unsigned long ip, unsigned long addr) { /* Place the address in the memory table. */ - if (addr == CALLER_ADDR) - __raw_writel(addr + MCOUNT_INSN_OFFSET, ftrace_replaced_code); - else - __raw_writel(addr, ftrace_replaced_code); + __raw_writel(addr, ftrace_replaced_code); /* * No locking needed, this must be called via kstop_machine @@ -51,7 +58,7 @@ unsigned char *ftrace_call_replace(unsigned long ip, unsigned long addr) return ftrace_replaced_code; } -int ftrace_modify_code(unsigned long ip, unsigned char *old_code, +static int ftrace_modify_code(unsigned long ip, unsigned char *old_code, unsigned char *new_code) { unsigned char replaced[MCOUNT_INSN_SIZE]; @@ -66,13 +73,6 @@ int ftrace_modify_code(unsigned long ip, unsigned char *old_code, * kstop_machine, or before SMP starts. */ - /* - * If we're trying to nop out a call to a function, we instead - * place a call to the address after the memory table. - */ - if (is_sh_nop(new_code) == 0) - __raw_writel(ip + MCOUNT_INSN_SIZE, (unsigned long)new_code); - /* read the text we want to modify */ if (probe_kernel_read(replaced, (void *)ip, MCOUNT_INSN_SIZE)) return -EFAULT; @@ -92,13 +92,13 @@ int ftrace_modify_code(unsigned long ip, unsigned char *old_code, int ftrace_update_ftrace_func(ftrace_func_t func) { - unsigned long ip = (unsigned long)(&ftrace_call); + unsigned long ip = (unsigned long)(&ftrace_call) + MCOUNT_INSN_OFFSET; unsigned char old[MCOUNT_INSN_SIZE], *new; - memcpy(old, (unsigned char *)(ip + MCOUNT_INSN_OFFSET), MCOUNT_INSN_SIZE); + memcpy(old, (unsigned char *)ip, MCOUNT_INSN_SIZE); new = ftrace_call_replace(ip, (unsigned long)func); - return ftrace_modify_code(ip + MCOUNT_INSN_OFFSET, old, new); + return ftrace_modify_code(ip, old, new); } int ftrace_make_nop(struct module *mod, @@ -108,7 +108,7 @@ int ftrace_make_nop(struct module *mod, unsigned long ip = rec->ip; old = ftrace_call_replace(ip, addr); - new = ftrace_nop_replace(); + new = ftrace_nop_replace(ip); return ftrace_modify_code(rec->ip, old, new); } @@ -118,7 +118,7 @@ int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) unsigned char *new, *old; unsigned long ip = rec->ip; - old = ftrace_nop_replace(); + old = ftrace_nop_replace(ip); new = ftrace_call_replace(ip, addr); return ftrace_modify_code(rec->ip, old, new); -- cgit v1.1 From 1f82de10d6b1d845155363c895c552e61b36b51a Mon Sep 17 00:00:00 2001 From: Yinghai Lu <yinghai@kernel.org> Date: Thu, 23 Apr 2009 20:48:32 -0700 Subject: PCI/x86: don't assume prefetchable ranges are 64bit We should not assign 64bit ranges to PCI devices that only take 32bit prefetchable addresses. Try to set IORESOURCE_MEM_64 in 64bit resource of pci_device/pci_bridge and make the bus resource only have that bit set when all devices under it support 64bit prefetchable memory. Use that flag to allocate resources from that range. Reported-by: Yannick <yannick.roehlly@free.fr> Reviewed-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> --- arch/x86/include/asm/pci.h | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h index b51a1e8..927958d 100644 --- a/arch/x86/include/asm/pci.h +++ b/arch/x86/include/asm/pci.h @@ -130,6 +130,7 @@ extern void pci_iommu_alloc(void); /* generic pci stuff */ #include <asm-generic/pci.h> +#define PCIBIOS_MAX_MEM_32 0xffffffff #ifdef CONFIG_NUMA /* Returns the node based on pci bus */ -- cgit v1.1 From 9e9f46c44e487af0a82eb61b624553e2f7118f5b Mon Sep 17 00:00:00 2001 From: Jesse Barnes <jbarnes@virtuousgeek.org> Date: Thu, 11 Jun 2009 10:58:28 -0700 Subject: PCI: use ACPI _CRS data by default At this point, it seems to solve more problems than it causes, so let's try using it by default. It's an easy revert if it ends up causing trouble. Reviewed-by: Yinghai Lu <yhlu.kernel@gmail.com> Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> --- arch/x86/include/asm/pci_x86.h | 2 +- arch/x86/pci/acpi.c | 2 +- arch/x86/pci/amd_bus.c | 2 +- arch/x86/pci/common.c | 4 ++-- 4 files changed, 5 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/pci_x86.h b/arch/x86/include/asm/pci_x86.h index e60fd3e..cb739cc 100644 --- a/arch/x86/include/asm/pci_x86.h +++ b/arch/x86/include/asm/pci_x86.h @@ -25,7 +25,7 @@ #define PCI_BIOS_IRQ_SCAN 0x2000 #define PCI_ASSIGN_ALL_BUSSES 0x4000 #define PCI_CAN_SKIP_ISA_ALIGN 0x8000 -#define PCI_USE__CRS 0x10000 +#define PCI_NO_ROOT_CRS 0x10000 #define PCI_CHECK_ENABLE_AMD_MMCONF 0x20000 #define PCI_HAS_IO_ECS 0x40000 #define PCI_NOASSIGN_ROMS 0x80000 diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c index c0ecf25..8d898e0 100644 --- a/arch/x86/pci/acpi.c +++ b/arch/x86/pci/acpi.c @@ -217,7 +217,7 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do #endif } - if (bus && (pci_probe & PCI_USE__CRS)) + if (bus && !(pci_probe & PCI_NO_ROOT_CRS)) get_current_resources(device, busnum, domain, bus); return bus; } diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c index f893d6a..2255f88 100644 --- a/arch/x86/pci/amd_bus.c +++ b/arch/x86/pci/amd_bus.c @@ -101,7 +101,7 @@ void x86_pci_root_bus_res_quirks(struct pci_bus *b) struct pci_root_info *info; /* don't go for it if _CRS is used */ - if (pci_probe & PCI_USE__CRS) + if (!(pci_probe & PCI_NO_ROOT_CRS)) return; /* if only one root bus, don't need to anything */ diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c index 2202b62..4740119 100644 --- a/arch/x86/pci/common.c +++ b/arch/x86/pci/common.c @@ -515,8 +515,8 @@ char * __devinit pcibios_setup(char *str) } else if (!strcmp(str, "assign-busses")) { pci_probe |= PCI_ASSIGN_ALL_BUSSES; return NULL; - } else if (!strcmp(str, "use_crs")) { - pci_probe |= PCI_USE__CRS; + } else if (!strcmp(str, "nocrs")) { + pci_probe |= PCI_NO_ROOT_CRS; return NULL; } else if (!strcmp(str, "earlydump")) { pci_early_dump_regs = 1; -- cgit v1.1 From 19470e185a088591c228e1e8473006567719aa1c Mon Sep 17 00:00:00 2001 From: Paul Mundt <lethal@linux-sh.org> Date: Fri, 12 Jun 2009 01:33:22 +0300 Subject: sh: Wire up sys_perf_counter_open. Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/include/asm/unistd_32.h | 3 ++- arch/sh/include/asm/unistd_64.h | 3 ++- arch/sh/kernel/syscalls_32.S | 1 + arch/sh/kernel/syscalls_64.S | 1 + 4 files changed, 6 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/sh/include/asm/unistd_32.h b/arch/sh/include/asm/unistd_32.h index 6519708..61d6ad9 100644 --- a/arch/sh/include/asm/unistd_32.h +++ b/arch/sh/include/asm/unistd_32.h @@ -344,8 +344,9 @@ #define __NR_preadv 333 #define __NR_pwritev 334 #define __NR_rt_tgsigqueueinfo 335 +#define __NR_perf_counter_open 336 -#define NR_syscalls 336 +#define NR_syscalls 337 #ifdef __KERNEL__ diff --git a/arch/sh/include/asm/unistd_64.h b/arch/sh/include/asm/unistd_64.h index 8014aea..a751699 100644 --- a/arch/sh/include/asm/unistd_64.h +++ b/arch/sh/include/asm/unistd_64.h @@ -384,10 +384,11 @@ #define __NR_preadv 361 #define __NR_pwritev 362 #define __NR_rt_tgsigqueueinfo 363 +#define __NR_perf_counter_open 364 #ifdef __KERNEL__ -#define NR_syscalls 364 +#define NR_syscalls 365 #define __ARCH_WANT_IPC_PARSE_VERSION #define __ARCH_WANT_OLD_READDIR diff --git a/arch/sh/kernel/syscalls_32.S b/arch/sh/kernel/syscalls_32.S index a9fff9f..f9e21fa 100644 --- a/arch/sh/kernel/syscalls_32.S +++ b/arch/sh/kernel/syscalls_32.S @@ -352,3 +352,4 @@ ENTRY(sys_call_table) .long sys_preadv .long sys_pwritev .long sys_rt_tgsigqueueinfo /* 335 */ + .long sys_perf_counter_open diff --git a/arch/sh/kernel/syscalls_64.S b/arch/sh/kernel/syscalls_64.S index 75c1889..bf420b6 100644 --- a/arch/sh/kernel/syscalls_64.S +++ b/arch/sh/kernel/syscalls_64.S @@ -390,3 +390,4 @@ sys_call_table: .long sys_preadv .long sys_pwritev .long sys_rt_tgsigqueueinfo + .long sys_perf_counter_open -- cgit v1.1 From 41d840e224170d2768493e320f290ed060491727 Mon Sep 17 00:00:00 2001 From: Shaohua Li <shaohua.li@intel.com> Date: Fri, 12 Jun 2009 12:57:52 +0800 Subject: x86: change kernel_physical_mapping_init() __init to __meminit kernel_physical_mapping_init() could be called in memory hotplug path. [ Impact: fix potential crash with memory hotplug ] Signed-off-by: Shaohua Li <shaohua.li@intel.com> LKML-Reference: <20090612045752.GA827@sli10-desk.sh.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/mm/init_64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index 52bb951..52e1bff 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -527,7 +527,7 @@ phys_pud_update(pgd_t *pgd, unsigned long addr, unsigned long end, return phys_pud_init(pud, addr, end, page_size_mask); } -unsigned long __init +unsigned long __meminit kernel_physical_mapping_init(unsigned long start, unsigned long end, unsigned long page_size_mask) -- cgit v1.1 From c636f753b5b943f08fb3490e7f1a9b47aa5cc7d3 Mon Sep 17 00:00:00 2001 From: Len Brown <len.brown@intel.com> Date: Tue, 19 May 2009 23:47:38 -0400 Subject: ACPI: delete dead acpi_disabled setting code Testing CONFIG_ACPI inside boot.c is a waste of text, since boot.c is built only when CONFIG_ACPI=y Signed-off-by: Len Brown <len.brown@intel.com> --- arch/x86/kernel/acpi/boot.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 723989d..d4acedf 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -43,11 +43,7 @@ static int __initdata acpi_force = 0; u32 acpi_rsdt_forced; -#ifdef CONFIG_ACPI -int acpi_disabled = 0; -#else -int acpi_disabled = 1; -#endif +int acpi_disabled; EXPORT_SYMBOL(acpi_disabled); #ifdef CONFIG_X86_64 -- cgit v1.1 From d023e49118b9c93bbab9aaf798b25f78f1a5803c Mon Sep 17 00:00:00 2001 From: Olivier Berger <oberger@ouvaton.org> Date: Thu, 21 May 2009 16:07:38 +0200 Subject: ACPI: Remove Asus P4B266 from blacklist See http://marc.info/?l=linux-acpi&m=124068823904429&w=2 for discussion Signed-off-by: Olivier Berger <oberger@ouvaton.org> Signed-off-by: Len Brown <len.brown@intel.com> --- arch/x86/kernel/acpi/boot.c | 8 -------- 1 file changed, 8 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index d4acedf..817d6a5 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -1565,14 +1565,6 @@ static struct dmi_system_id __initdata acpi_dmi_table[] = { }, { .callback = force_acpi_ht, - .ident = "ASUS P4B266", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), - DMI_MATCH(DMI_BOARD_NAME, "P4B266"), - }, - }, - { - .callback = force_acpi_ht, .ident = "ASUS P2B-DS", .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), -- cgit v1.1 From c4bf2f372db09ef8d16a25a60d523bfa1c50f7b5 Mon Sep 17 00:00:00 2001 From: Len Brown <len.brown@intel.com> Date: Thu, 11 Jun 2009 23:53:55 -0400 Subject: ACPI, PCI, x86: move MCFG parsing routine from ACPI to PCI file Move arch/x86/kernel/acpi/boot.c: acpi_parse_mcfg() to arch/x86/pci/mmconfig-shared.c: pci_parse_mcfg() where it is used, and make it static. Move associated globals and helper routine with it. No functional change. This code move is in preparation for SFI support, which will allow the PCI code to find the MCFG table on systems which do not support ACPI. Signed-off-by: Len Brown <len.brown@intel.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> --- arch/x86/include/asm/pci_x86.h | 3 ++ arch/x86/kernel/acpi/boot.c | 66 ------------------------------------------ arch/x86/pci/mmconfig-shared.c | 65 ++++++++++++++++++++++++++++++++++++++++- 3 files changed, 67 insertions(+), 67 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/pci_x86.h b/arch/x86/include/asm/pci_x86.h index e60fd3e..b399988 100644 --- a/arch/x86/include/asm/pci_x86.h +++ b/arch/x86/include/asm/pci_x86.h @@ -121,6 +121,9 @@ extern int __init pcibios_init(void); extern int __init pci_mmcfg_arch_init(void); extern void __init pci_mmcfg_arch_free(void); +extern struct acpi_mcfg_allocation *pci_mmcfg_config; +extern int pci_mmcfg_config_num; + /* * AMD Fam10h CPUs are buggy, and cannot access MMIO config space * on their northbrige except through the * %eax register. As such, you MUST diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 817d6a5..f54e0e5 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -117,72 +117,6 @@ void __init __acpi_unmap_table(char *map, unsigned long size) early_iounmap(map, size); } -#ifdef CONFIG_PCI_MMCONFIG - -static int acpi_mcfg_64bit_base_addr __initdata = FALSE; - -/* The physical address of the MMCONFIG aperture. Set from ACPI tables. */ -struct acpi_mcfg_allocation *pci_mmcfg_config; -int pci_mmcfg_config_num; - -static int __init acpi_mcfg_oem_check(struct acpi_table_mcfg *mcfg) -{ - if (!strcmp(mcfg->header.oem_id, "SGI")) - acpi_mcfg_64bit_base_addr = TRUE; - - return 0; -} - -int __init acpi_parse_mcfg(struct acpi_table_header *header) -{ - struct acpi_table_mcfg *mcfg; - unsigned long i; - int config_size; - - if (!header) - return -EINVAL; - - mcfg = (struct acpi_table_mcfg *)header; - - /* how many config structures do we have */ - pci_mmcfg_config_num = 0; - i = header->length - sizeof(struct acpi_table_mcfg); - while (i >= sizeof(struct acpi_mcfg_allocation)) { - ++pci_mmcfg_config_num; - i -= sizeof(struct acpi_mcfg_allocation); - }; - if (pci_mmcfg_config_num == 0) { - printk(KERN_ERR PREFIX "MMCONFIG has no entries\n"); - return -ENODEV; - } - - config_size = pci_mmcfg_config_num * sizeof(*pci_mmcfg_config); - pci_mmcfg_config = kmalloc(config_size, GFP_KERNEL); - if (!pci_mmcfg_config) { - printk(KERN_WARNING PREFIX - "No memory for MCFG config tables\n"); - return -ENOMEM; - } - - memcpy(pci_mmcfg_config, &mcfg[1], config_size); - - acpi_mcfg_oem_check(mcfg); - - for (i = 0; i < pci_mmcfg_config_num; ++i) { - if ((pci_mmcfg_config[i].address > 0xFFFFFFFF) && - !acpi_mcfg_64bit_base_addr) { - printk(KERN_ERR PREFIX - "MMCONFIG not in low 4GB of memory\n"); - kfree(pci_mmcfg_config); - pci_mmcfg_config_num = 0; - return -ENODEV; - } - } - - return 0; -} -#endif /* CONFIG_PCI_MMCONFIG */ - #ifdef CONFIG_X86_LOCAL_APIC static int __init acpi_parse_madt(struct acpi_table_header *table) { diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c index 8766b0e..712443e 100644 --- a/arch/x86/pci/mmconfig-shared.c +++ b/arch/x86/pci/mmconfig-shared.c @@ -523,6 +523,69 @@ reject: static int __initdata known_bridge; +static int acpi_mcfg_64bit_base_addr __initdata = FALSE; + +/* The physical address of the MMCONFIG aperture. Set from ACPI tables. */ +struct acpi_mcfg_allocation *pci_mmcfg_config; +int pci_mmcfg_config_num; + +static int __init acpi_mcfg_oem_check(struct acpi_table_mcfg *mcfg) +{ + if (!strcmp(mcfg->header.oem_id, "SGI")) + acpi_mcfg_64bit_base_addr = TRUE; + + return 0; +} + +static int __init pci_parse_mcfg(struct acpi_table_header *header) +{ + struct acpi_table_mcfg *mcfg; + unsigned long i; + int config_size; + + if (!header) + return -EINVAL; + + mcfg = (struct acpi_table_mcfg *)header; + + /* how many config structures do we have */ + pci_mmcfg_config_num = 0; + i = header->length - sizeof(struct acpi_table_mcfg); + while (i >= sizeof(struct acpi_mcfg_allocation)) { + ++pci_mmcfg_config_num; + i -= sizeof(struct acpi_mcfg_allocation); + }; + if (pci_mmcfg_config_num == 0) { + printk(KERN_ERR PREFIX "MMCONFIG has no entries\n"); + return -ENODEV; + } + + config_size = pci_mmcfg_config_num * sizeof(*pci_mmcfg_config); + pci_mmcfg_config = kmalloc(config_size, GFP_KERNEL); + if (!pci_mmcfg_config) { + printk(KERN_WARNING PREFIX + "No memory for MCFG config tables\n"); + return -ENOMEM; + } + + memcpy(pci_mmcfg_config, &mcfg[1], config_size); + + acpi_mcfg_oem_check(mcfg); + + for (i = 0; i < pci_mmcfg_config_num; ++i) { + if ((pci_mmcfg_config[i].address > 0xFFFFFFFF) && + !acpi_mcfg_64bit_base_addr) { + printk(KERN_ERR PREFIX + "MMCONFIG not in low 4GB of memory\n"); + kfree(pci_mmcfg_config); + pci_mmcfg_config_num = 0; + return -ENODEV; + } + } + + return 0; +} + static void __init __pci_mmcfg_init(int early) { /* MMCONFIG disabled */ @@ -543,7 +606,7 @@ static void __init __pci_mmcfg_init(int early) } if (!known_bridge) - acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg); + acpi_table_parse(ACPI_SIG_MCFG, pci_parse_mcfg); pci_mmcfg_reject_broken(early); -- cgit v1.1 From ab46feae865c5b96dbf5e261be8638165932bfb1 Mon Sep 17 00:00:00 2001 From: Len Brown <len.brown@intel.com> Date: Fri, 12 Jun 2009 20:47:50 -0400 Subject: ACPI: #define acpi_disabled 1 for CONFIG_ACPI=n SFI will need to test acpi_disabled no matter the value of CONFIG_ACPI. Signed-off-by: Len Brown <len.brown@intel.com> --- arch/x86/include/asm/acpi.h | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h index 4518dc5..20d1465 100644 --- a/arch/x86/include/asm/acpi.h +++ b/arch/x86/include/asm/acpi.h @@ -144,6 +144,7 @@ static inline unsigned int acpi_processor_cstate_check(unsigned int max_cstate) #else /* !CONFIG_ACPI */ +#define acpi_disabled 1 #define acpi_lapic 0 #define acpi_ioapic 0 static inline void acpi_noirq_set(void) { } -- cgit v1.1 From 4d2be1267fcfb3a4d2198fd696aec5e3dcbce60e Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput <jaswinder@kernel.org> Date: Thu, 11 Jun 2009 15:28:09 +0530 Subject: perf_counter, x86: Check old-AMD performance monitoring support AMD supports performance monitoring start from K7 (i.e. family 6), so disable it for earlier AMD CPUs. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <1244714289.6923.0.camel@ht.satnam> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/kernel/cpu/perf_counter.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c index 275bc14..3c37c39 100644 --- a/arch/x86/kernel/cpu/perf_counter.c +++ b/arch/x86/kernel/cpu/perf_counter.c @@ -1459,6 +1459,10 @@ static int intel_pmu_init(void) static int amd_pmu_init(void) { + /* Performance-monitoring supported from K7 and later: */ + if (boot_cpu_data.x86 < 6) + return -ENODEV; + x86_pmu = amd_pmu; switch (boot_cpu_data.x86) { -- cgit v1.1 From f4db43a38f7387c3b19c9565124c06ab0c5d6e9a Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput <jaswinder@kernel.org> Date: Sat, 13 Jun 2009 01:06:21 +0530 Subject: perf_counter, x86: Update AMD hw caching related event table All AMD models share the same hw caching related event table. Also complete the table with more events. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <1244835381.2802.2.camel@ht.satnam> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/kernel/cpu/perf_counter.c | 36 +++++++++++++++--------------------- 1 file changed, 15 insertions(+), 21 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c index 3c37c39..77a59a5 100644 --- a/arch/x86/kernel/cpu/perf_counter.c +++ b/arch/x86/kernel/cpu/perf_counter.c @@ -389,23 +389,23 @@ static u64 intel_pmu_raw_event(u64 event) return event & CORE_EVNTSEL_MASK; } -static const u64 amd_0f_hw_cache_event_ids +static const u64 amd_hw_cache_event_ids [PERF_COUNT_HW_CACHE_MAX] [PERF_COUNT_HW_CACHE_OP_MAX] [PERF_COUNT_HW_CACHE_RESULT_MAX] = { [ C(L1D) ] = { [ C(OP_READ) ] = { - [ C(RESULT_ACCESS) ] = 0, - [ C(RESULT_MISS) ] = 0, + [ C(RESULT_ACCESS) ] = 0x0040, /* Data Cache Accesses */ + [ C(RESULT_MISS) ] = 0x0041, /* Data Cache Misses */ }, [ C(OP_WRITE) ] = { - [ C(RESULT_ACCESS) ] = 0, + [ C(RESULT_ACCESS) ] = 0x0042, /* Data Cache Refills from L2 */ [ C(RESULT_MISS) ] = 0, }, [ C(OP_PREFETCH) ] = { - [ C(RESULT_ACCESS) ] = 0, - [ C(RESULT_MISS) ] = 0, + [ C(RESULT_ACCESS) ] = 0x0267, /* Data Prefetcher :attempts */ + [ C(RESULT_MISS) ] = 0x0167, /* Data Prefetcher :cancelled */ }, }, [ C(L1I ) ] = { @@ -418,17 +418,17 @@ static const u64 amd_0f_hw_cache_event_ids [ C(RESULT_MISS) ] = -1, }, [ C(OP_PREFETCH) ] = { - [ C(RESULT_ACCESS) ] = 0, + [ C(RESULT_ACCESS) ] = 0x014B, /* Prefetch Instructions :Load */ [ C(RESULT_MISS) ] = 0, }, }, [ C(LL ) ] = { [ C(OP_READ) ] = { - [ C(RESULT_ACCESS) ] = 0, - [ C(RESULT_MISS) ] = 0, + [ C(RESULT_ACCESS) ] = 0x037D, /* Requests to L2 Cache :IC+DC */ + [ C(RESULT_MISS) ] = 0x037E, /* L2 Cache Misses : IC+DC */ }, [ C(OP_WRITE) ] = { - [ C(RESULT_ACCESS) ] = 0, + [ C(RESULT_ACCESS) ] = 0x017F, /* L2 Fill/Writeback */ [ C(RESULT_MISS) ] = 0, }, [ C(OP_PREFETCH) ] = { @@ -438,8 +438,8 @@ static const u64 amd_0f_hw_cache_event_ids }, [ C(DTLB) ] = { [ C(OP_READ) ] = { - [ C(RESULT_ACCESS) ] = 0, - [ C(RESULT_MISS) ] = 0, + [ C(RESULT_ACCESS) ] = 0x0040, /* Data Cache Accesses */ + [ C(RESULT_MISS) ] = 0x0046, /* L1 DTLB and L2 DLTB Miss */ }, [ C(OP_WRITE) ] = { [ C(RESULT_ACCESS) ] = 0, @@ -1465,16 +1465,10 @@ static int amd_pmu_init(void) x86_pmu = amd_pmu; - switch (boot_cpu_data.x86) { - case 0x0f: - case 0x10: - case 0x11: - memcpy(hw_cache_event_ids, amd_0f_hw_cache_event_ids, - sizeof(hw_cache_event_ids)); + /* Events are common for all AMDs */ + memcpy(hw_cache_event_ids, amd_hw_cache_event_ids, + sizeof(hw_cache_event_ids)); - pr_cont("AMD Family 0f/10/11 events, "); - break; - } return 0; } -- cgit v1.1 From 46e443283891dbd45fba7fa037baab831f5d8f3f Mon Sep 17 00:00:00 2001 From: Randy Dunlap <randy.dunlap@oracle.com> Date: Sat, 13 Jun 2009 20:00:54 -0700 Subject: x86: atomic_32.h: Fix kernel-doc warnings Fix kernel-doc warnings in atomic_32.h: Warning(arch/x86/include/asm/atomic_32.h:265): No description found for parameter 'ptr' Warning(arch/x86/include/asm/atomic_32.h:265): Excess function parameter 'v' description in '__atomic64_read' Warning(arch/x86/include/asm/atomic_32.h:305): Excess function parameter 'old_val' description in 'atomic64_xchg' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> LKML-Reference: <4A3467E6.6010907@oracle.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/include/asm/atomic_32.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/atomic_32.h b/arch/x86/include/asm/atomic_32.h index aff9f1f..a6a4b35 100644 --- a/arch/x86/include/asm/atomic_32.h +++ b/arch/x86/include/asm/atomic_32.h @@ -257,7 +257,7 @@ typedef struct { /** * atomic64_read - read atomic64 variable - * @v: pointer of type atomic64_t + * @ptr: pointer of type atomic64_t * * Atomically reads the value of @v. * Doesn't imply a read memory barrier. @@ -294,7 +294,6 @@ atomic64_cmpxchg(atomic64_t *ptr, unsigned long long old_val, * atomic64_xchg - xchg atomic64 variable * @ptr: pointer to type atomic64_t * @new_val: value to assign - * @old_val: old value that was there * * Atomically xchgs the value of @ptr to @new_val and returns * the old value. -- cgit v1.1 From 78c99ba1b180a794f35a4d701693fbc1b00fe9e1 Mon Sep 17 00:00:00 2001 From: Huang Weiyi <weiyi.huang@gmail.com> Date: Sat, 13 Jun 2009 12:21:11 +0000 Subject: sh: pci: remove duplicated #include's Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/boards/mach-se/7780/irq.c | 1 - arch/sh/drivers/pci/ops-dreamcast.c | 1 - 2 files changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/sh/boards/mach-se/7780/irq.c b/arch/sh/boards/mach-se/7780/irq.c index b8d43b6..121744c 100644 --- a/arch/sh/boards/mach-se/7780/irq.c +++ b/arch/sh/boards/mach-se/7780/irq.c @@ -12,7 +12,6 @@ #include <linux/init.h> #include <linux/irq.h> #include <linux/interrupt.h> -#include <linux/irq.h> #include <linux/io.h> #include <mach-se/mach/se7780.h> diff --git a/arch/sh/drivers/pci/ops-dreamcast.c b/arch/sh/drivers/pci/ops-dreamcast.c index e83d0d3..16e0a1b 100644 --- a/arch/sh/drivers/pci/ops-dreamcast.c +++ b/arch/sh/drivers/pci/ops-dreamcast.c @@ -18,7 +18,6 @@ #include <linux/pci.h> #include <linux/module.h> #include <linux/io.h> -#include <linux/irq.h> #include <mach/pci.h> /* -- cgit v1.1 From 0cb73f4c4667bec8648c32c11f728b81180720d9 Mon Sep 17 00:00:00 2001 From: Rusty Russell <rusty@rustcorp.com.au> Date: Fri, 12 Jun 2009 22:31:04 +0930 Subject: cpumask: remove the now-obsoleted pcibus_to_cpumask(): sh cpumask_of_pcibus() is the new version. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/include/asm/topology.h | 3 --- 1 file changed, 3 deletions(-) (limited to 'arch') diff --git a/arch/sh/include/asm/topology.h b/arch/sh/include/asm/topology.h index 8489a09..b69ee85 100644 --- a/arch/sh/include/asm/topology.h +++ b/arch/sh/include/asm/topology.h @@ -35,9 +35,6 @@ #define cpumask_of_node(node) ((void)node, cpu_online_mask) #define pcibus_to_node(bus) ((void)(bus), -1) -#define pcibus_to_cpumask(bus) (pcibus_to_node(bus) == -1 ? \ - CPU_MASK_ALL : \ - node_to_cpumask(pcibus_to_node(bus))) #define cpumask_of_pcibus(bus) (pcibus_to_node(bus) == -1 ? \ CPU_MASK_ALL_PTR : \ cpumask_of_node(pcibus_to_node(bus))) -- cgit v1.1 From 819807df6e60d415a73cd25038814dc9c88d376f Mon Sep 17 00:00:00 2001 From: Rusty Russell <rusty@rustcorp.com.au> Date: Fri, 12 Jun 2009 22:32:35 +0930 Subject: cpumask: arch_send_call_function_ipi_mask: sh We're weaning the core code off handing cpumask's around on-stack. This introduces arch_send_call_function_ipi_mask(), and by defining it, the old arch_send_call_function_ipi is defined by the core code. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/include/asm/smp.h | 3 ++- arch/sh/kernel/smp.c | 4 ++-- 2 files changed, 4 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/sh/include/asm/smp.h b/arch/sh/include/asm/smp.h index c24e9c6..ca64f43 100644 --- a/arch/sh/include/asm/smp.h +++ b/arch/sh/include/asm/smp.h @@ -43,7 +43,8 @@ void plat_start_cpu(unsigned int cpu, unsigned long entry_point); void plat_send_ipi(unsigned int cpu, unsigned int message); void arch_send_call_function_single_ipi(int cpu); -void arch_send_call_function_ipi(cpumask_t mask); +extern void arch_send_call_function_ipi_mask(const struct cpumask *mask); +#define arch_send_call_function_ipi_mask arch_send_call_function_ipi_mask #else diff --git a/arch/sh/kernel/smp.c b/arch/sh/kernel/smp.c index 8f40274..576aad3 100644 --- a/arch/sh/kernel/smp.c +++ b/arch/sh/kernel/smp.c @@ -171,11 +171,11 @@ void smp_send_stop(void) smp_call_function(stop_this_cpu, 0, 0); } -void arch_send_call_function_ipi(cpumask_t mask) +void arch_send_call_function_ipi_mask(const struct cpumask *mask) { int cpu; - for_each_cpu_mask(cpu, mask) + for_each_cpu(cpu, mask) plat_send_ipi(cpu, SMP_MSG_FUNCTION); } -- cgit v1.1 From 74c86d6757c8782e076f15aa87b8b509742c9927 Mon Sep 17 00:00:00 2001 From: Rusty Russell <rusty@rustcorp.com.au> Date: Fri, 12 Jun 2009 22:33:14 +0930 Subject: cpumask: use mm_cpumask() wrapper: sh Makes code futureproof against the impending change to mm->cpu_vm_mask. It's also a chance to use the new cpumask_ ops which take a pointer (the older ones are deprecated, but there's no hurry for arch code). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/include/asm/mmu_context.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/sh/include/asm/mmu_context.h b/arch/sh/include/asm/mmu_context.h index 2a9c55f..2c987f5 100644 --- a/arch/sh/include/asm/mmu_context.h +++ b/arch/sh/include/asm/mmu_context.h @@ -122,11 +122,11 @@ static inline void switch_mm(struct mm_struct *prev, unsigned int cpu = smp_processor_id(); if (likely(prev != next)) { - cpu_set(cpu, next->cpu_vm_mask); + cpumask_set_cpu(cpu, mm_cpumask(next)); set_TTB(next->pgd); activate_context(next, cpu); } else - if (!cpu_test_and_set(cpu, next->cpu_vm_mask)) + if (!cpumask_test_and_set_cpu(cpu, mm_cpumask(next))) activate_context(next, cpu); } #else -- cgit v1.1 From e09377bae410247f2ba35a2edc7ab637a5c79170 Mon Sep 17 00:00:00 2001 From: Rusty Russell <rusty@rustcorp.com.au> Date: Fri, 12 Jun 2009 22:33:14 +0930 Subject: cpumask: Use accessors for cpu_*_mask: sh Use the accessors rather than frobbing bits directly (the new versions are const). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/kernel/cpu/sh4a/smp-shx3.c | 5 ++--- arch/sh/kernel/smp.c | 6 +++--- 2 files changed, 5 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/sh/kernel/cpu/sh4a/smp-shx3.c b/arch/sh/kernel/cpu/sh4a/smp-shx3.c index b8869aa..2b6b0d5 100644 --- a/arch/sh/kernel/cpu/sh4a/smp-shx3.c +++ b/arch/sh/kernel/cpu/sh4a/smp-shx3.c @@ -35,8 +35,7 @@ void __init plat_smp_setup(void) unsigned int cpu = 0; int i, num; - cpus_clear(cpu_possible_map); - cpu_set(cpu, cpu_possible_map); + init_cpu_possible(cpumask_of(cpu)); __cpu_number_map[0] = 0; __cpu_logical_map[0] = 0; @@ -46,7 +45,7 @@ void __init plat_smp_setup(void) * for the total number of cores. */ for (i = 1, num = 0; i < NR_CPUS; i++) { - cpu_set(i, cpu_possible_map); + set_cpu_possible(i, true); __cpu_number_map[i] = ++num; __cpu_logical_map[num] = i; } diff --git a/arch/sh/kernel/smp.c b/arch/sh/kernel/smp.c index 576aad3..442d8d4 100644 --- a/arch/sh/kernel/smp.c +++ b/arch/sh/kernel/smp.c @@ -47,7 +47,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus) plat_prepare_cpus(max_cpus); #ifndef CONFIG_HOTPLUG_CPU - cpu_present_map = cpu_possible_map; + init_cpu_present(&cpu_possible_map); #endif } @@ -58,8 +58,8 @@ void __devinit smp_prepare_boot_cpu(void) __cpu_number_map[0] = cpu; __cpu_logical_map[0] = cpu; - cpu_set(cpu, cpu_online_map); - cpu_set(cpu, cpu_possible_map); + set_cpu_online(cpu, true); + set_cpu_possible(cpu, true); } asmlinkage void __cpuinit start_secondary(void) -- cgit v1.1 From 1d29ebebcb951ab6b04d22807cafb24b893310a2 Mon Sep 17 00:00:00 2001 From: Paul Mundt <lethal@linux-sh.org> Date: Sun, 14 Jun 2009 19:45:40 +0900 Subject: sh: Bump the earlytimer bits back to time_init(). These were handled through late_time_init due to kmalloc() and friends not being available earlier on previously. Now with slab caches being available much earlier, this is no longer necessary, and we can move the initialization up to an earlier point. One of the benefits with this is that printk times are available a bit earlier! Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/kernel/time.c | 17 ++++++----------- 1 file changed, 6 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/sh/kernel/time.c b/arch/sh/kernel/time.c index 2edde32..0eecbe8 100644 --- a/arch/sh/kernel/time.c +++ b/arch/sh/kernel/time.c @@ -96,16 +96,6 @@ unsigned long long sched_clock(void) return (jiffies_64 - INITIAL_JIFFIES) * (NSEC_PER_SEC / HZ); } -static void __init sh_late_time_init(void) -{ - /* - * Make sure all compiled-in early timers register themselves. - * Run probe() for one "earlytimer" device. - */ - early_platform_driver_register_all("earlytimer"); - early_platform_driver_probe("earlytimer", 1, 0); -} - void __init time_init(void) { if (board_time_init) @@ -121,5 +111,10 @@ void __init time_init(void) local_timer_setup(smp_processor_id()); #endif - late_time_init = sh_late_time_init; + /* + * Make sure all compiled-in early timers register themselves. + * Run probe() for one "earlytimer" device. + */ + early_platform_driver_register_all("earlytimer"); + early_platform_driver_probe("earlytimer", 1, 0); } -- cgit v1.1 From a34c7e3e7b0e7db67ffef21ba3056eb2f807ba4a Mon Sep 17 00:00:00 2001 From: Paul Mundt <lethal@linux-sh.org> Date: Sun, 14 Jun 2009 19:48:48 +0900 Subject: sh: Use generic sched_clock(). The generic sched_clock() handles INITIAL_JIFFIES now as well, so we can just use that instead. Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/kernel/time.c | 5 ----- 1 file changed, 5 deletions(-) (limited to 'arch') diff --git a/arch/sh/kernel/time.c b/arch/sh/kernel/time.c index 0eecbe8..960d9ab 100644 --- a/arch/sh/kernel/time.c +++ b/arch/sh/kernel/time.c @@ -91,11 +91,6 @@ module_init(rtc_generic_init); void (*board_time_init)(void); -unsigned long long sched_clock(void) -{ - return (jiffies_64 - INITIAL_JIFFIES) * (NSEC_PER_SEC / HZ); -} - void __init time_init(void) { if (board_time_init) -- cgit v1.1 From 6fe32a468521d45edc35d92cdc05cd74e930426a Mon Sep 17 00:00:00 2001 From: Paul Mundt <lethal@linux-sh.org> Date: Sun, 14 Jun 2009 20:02:30 +0900 Subject: sh: Bump the earlytimer probe devices up. Presently the earlytimer probe handles the clockevents driver, which requires that the clockevents driver be registered first. This bumps it up by 1 to include the clocksource device, which can be safely ignored if it doesn't exist, as we will simply error out on that path and defer to the jiffies clocksource. Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/kernel/time.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/sh/kernel/time.c b/arch/sh/kernel/time.c index 960d9ab..9b352a1 100644 --- a/arch/sh/kernel/time.c +++ b/arch/sh/kernel/time.c @@ -108,8 +108,13 @@ void __init time_init(void) /* * Make sure all compiled-in early timers register themselves. - * Run probe() for one "earlytimer" device. + * + * Run probe() for two "earlytimer" devices, these will be the + * clockevents and clocksource devices respectively. In the event + * that only a clockevents device is available, we -ENODEV on the + * clocksource and the jiffies clocksource is used transparently + * instead. No error handling is necessary here. */ early_platform_driver_register_all("earlytimer"); - early_platform_driver_probe("earlytimer", 1, 0); + early_platform_driver_probe("earlytimer", 2, 0); } -- cgit v1.1 From 4822994a238b44ab5d162243077fe6273171fbab Mon Sep 17 00:00:00 2001 From: Paul Mundt <lethal@linux-sh.org> Date: Sun, 14 Jun 2009 21:34:26 +0900 Subject: sh: Convert to asm-generic/current.h. Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/include/asm/current.h | 21 +-------------------- 1 file changed, 1 insertion(+), 20 deletions(-) (limited to 'arch') diff --git a/arch/sh/include/asm/current.h b/arch/sh/include/asm/current.h index 62b6388..4c51401 100644 --- a/arch/sh/include/asm/current.h +++ b/arch/sh/include/asm/current.h @@ -1,20 +1 @@ -#ifndef __ASM_SH_CURRENT_H -#define __ASM_SH_CURRENT_H - -/* - * Copyright (C) 1999 Niibe Yutaka - * - */ - -#include <linux/thread_info.h> - -struct task_struct; - -static __inline__ struct task_struct * get_current(void) -{ - return current_thread_info()->task; -} - -#define current get_current() - -#endif /* __ASM_SH_CURRENT_H */ +#include <asm-generic/current.h> -- cgit v1.1 From 9deaa3bcff657f6e54e869ac1507c7ea8088fd09 Mon Sep 17 00:00:00 2001 From: Paul Mundt <lethal@linux-sh.org> Date: Sun, 14 Jun 2009 21:45:06 +0900 Subject: sh: Convert to asm-generic/dma.h. Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/include/asm/dma.h | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/sh/include/asm/dma.h b/arch/sh/include/asm/dma.h index 6bd1784..04ad0e1 100644 --- a/arch/sh/include/asm/dma.h +++ b/arch/sh/include/asm/dma.h @@ -16,13 +16,7 @@ #include <linux/sched.h> #include <linux/sysdev.h> #include <cpu/dma.h> - -/* The maximum address that we can perform a DMA transfer to on this platform */ -/* Don't define MAX_DMA_ADDRESS; it's useless on the SuperH and any - occurrence should be flagged as an error. */ -/* But... */ -/* XXX: This is not applicable to SuperH, just needed for alloc_bootmem */ -#define MAX_DMA_ADDRESS (PAGE_OFFSET+0x10000000) +#include <asm-generic/dma.h> #ifdef CONFIG_NR_DMA_CHANNELS # define MAX_DMA_CHANNELS (CONFIG_NR_DMA_CHANNELS) @@ -137,8 +131,6 @@ extern int dma_xfer(unsigned int chan, unsigned long from, extern int request_dma_bycap(const char **dmac, const char **caps, const char *dev_id); -extern int request_dma(unsigned int chan, const char *dev_id); -extern void free_dma(unsigned int chan); extern int get_dma_residue(unsigned int chan); extern struct dma_info *get_dma_info(unsigned int chan); extern struct dma_channel *get_dma_channel(unsigned int chan); -- cgit v1.1 From bc8d422d1158a338a567e1b878dedd52efeba9a1 Mon Sep 17 00:00:00 2001 From: Paul Mundt <lethal@linux-sh.org> Date: Sun, 14 Jun 2009 23:16:27 +0900 Subject: sh: Convert to asm-generic/posix_types.h. Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/include/asm/posix_types_32.h | 119 +++++--------------------------- arch/sh/include/asm/posix_types_64.h | 127 +++++------------------------------ 2 files changed, 32 insertions(+), 214 deletions(-) (limited to 'arch') diff --git a/arch/sh/include/asm/posix_types_32.h b/arch/sh/include/asm/posix_types_32.h index 2172732..6a9ceaa 100644 --- a/arch/sh/include/asm/posix_types_32.h +++ b/arch/sh/include/asm/posix_types_32.h @@ -1,118 +1,29 @@ -#ifndef __ASM_SH_POSIX_TYPES_H -#define __ASM_SH_POSIX_TYPES_H +#ifndef __ASM_SH_POSIX_TYPES_32_H +#define __ASM_SH_POSIX_TYPES_32_H -/* - * This file is generally used by user-level software, so you need to - * be a little careful about namespace pollution etc. Also, we cannot - * assume GCC is being used. - */ - -typedef unsigned long __kernel_ino_t; typedef unsigned short __kernel_mode_t; +#define __kernel_mode_t __kernel_mode_t typedef unsigned short __kernel_nlink_t; -typedef long __kernel_off_t; -typedef int __kernel_pid_t; +#define __kernel_nlink_t __kernel_nlink_t typedef unsigned short __kernel_ipc_pid_t; +#define __kernel_ipc_pid_t __kernel_ipc_pid_t typedef unsigned short __kernel_uid_t; +#define __kernel_uid_t __kernel_uid_t typedef unsigned short __kernel_gid_t; -typedef unsigned int __kernel_size_t; -typedef int __kernel_ssize_t; -typedef int __kernel_ptrdiff_t; -typedef long __kernel_time_t; -typedef long __kernel_suseconds_t; -typedef long __kernel_clock_t; -typedef int __kernel_timer_t; -typedef int __kernel_clockid_t; -typedef int __kernel_daddr_t; -typedef char * __kernel_caddr_t; -typedef unsigned short __kernel_uid16_t; -typedef unsigned short __kernel_gid16_t; +#define __kernel_gid_t __kernel_gid_t + typedef unsigned int __kernel_uid32_t; +#define __kernel_uid32_t __kernel_uid32_t typedef unsigned int __kernel_gid32_t; +#define __kernel_gid32_t __kernel_gid32_t typedef unsigned short __kernel_old_uid_t; +#define __kernel_old_uid_t __kernel_old_uid_t typedef unsigned short __kernel_old_gid_t; +#define __kernel_old_gid_t __kernel_old_gid_t typedef unsigned short __kernel_old_dev_t; +#define __kernel_old_dev_t __kernel_old_dev_t -#ifdef __GNUC__ -typedef long long __kernel_loff_t; -#endif - -typedef struct { - int val[2]; -} __kernel_fsid_t; - -#if defined(__KERNEL__) - -#undef __FD_SET -static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp) -{ - unsigned long __tmp = __fd / __NFDBITS; - unsigned long __rem = __fd % __NFDBITS; - __fdsetp->fds_bits[__tmp] |= (1UL<<__rem); -} - -#undef __FD_CLR -static __inline__ void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp) -{ - unsigned long __tmp = __fd / __NFDBITS; - unsigned long __rem = __fd % __NFDBITS; - __fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem); -} - - -#undef __FD_ISSET -static __inline__ int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p) -{ - unsigned long __tmp = __fd / __NFDBITS; - unsigned long __rem = __fd % __NFDBITS; - return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0; -} - -/* - * This will unroll the loop for the normal constant case (8 ints, - * for a 256-bit fd_set) - */ -#undef __FD_ZERO -static __inline__ void __FD_ZERO(__kernel_fd_set *__p) -{ - unsigned long *__tmp = __p->fds_bits; - int __i; - - if (__builtin_constant_p(__FDSET_LONGS)) { - switch (__FDSET_LONGS) { - case 16: - __tmp[ 0] = 0; __tmp[ 1] = 0; - __tmp[ 2] = 0; __tmp[ 3] = 0; - __tmp[ 4] = 0; __tmp[ 5] = 0; - __tmp[ 6] = 0; __tmp[ 7] = 0; - __tmp[ 8] = 0; __tmp[ 9] = 0; - __tmp[10] = 0; __tmp[11] = 0; - __tmp[12] = 0; __tmp[13] = 0; - __tmp[14] = 0; __tmp[15] = 0; - return; - - case 8: - __tmp[ 0] = 0; __tmp[ 1] = 0; - __tmp[ 2] = 0; __tmp[ 3] = 0; - __tmp[ 4] = 0; __tmp[ 5] = 0; - __tmp[ 6] = 0; __tmp[ 7] = 0; - return; - - case 4: - __tmp[ 0] = 0; __tmp[ 1] = 0; - __tmp[ 2] = 0; __tmp[ 3] = 0; - return; - } - } - __i = __FDSET_LONGS; - while (__i) { - __i--; - *__tmp = 0; - __tmp++; - } -} - -#endif /* defined(__KERNEL__) */ +#include <asm-generic/posix_types.h> -#endif /* __ASM_SH_POSIX_TYPES_H */ +#endif /* __ASM_SH_POSIX_TYPES_32_H */ diff --git a/arch/sh/include/asm/posix_types_64.h b/arch/sh/include/asm/posix_types_64.h index f83e9bd..8cd1148 100644 --- a/arch/sh/include/asm/posix_types_64.h +++ b/arch/sh/include/asm/posix_types_64.h @@ -1,127 +1,34 @@ -#ifndef __ASM_SH64_POSIX_TYPES_H -#define __ASM_SH64_POSIX_TYPES_H +#ifndef __ASM_SH_POSIX_TYPES_64_H +#define __ASM_SH_POSIX_TYPES_64_H -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * include/asm-sh64/posix_types.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2003 Paul Mundt - * - * This file is generally used by user-level software, so you need to - * be a little careful about namespace pollution etc. Also, we cannot - * assume GCC is being used. - */ - -typedef unsigned long __kernel_ino_t; typedef unsigned short __kernel_mode_t; +#define __kernel_mode_t __kernel_mode_t typedef unsigned short __kernel_nlink_t; -typedef long __kernel_off_t; -typedef int __kernel_pid_t; +#define __kernel_nlink_t __kernel_nlink_t typedef unsigned short __kernel_ipc_pid_t; +#define __kernel_ipc_pid_t __kernel_ipc_pid_t typedef unsigned short __kernel_uid_t; +#define __kernel_uid_t __kernel_uid_t typedef unsigned short __kernel_gid_t; +#define __kernel_gid_t __kernel_gid_t typedef long unsigned int __kernel_size_t; +#define __kernel_size_t __kernel_size_t typedef int __kernel_ssize_t; +#define __kernel_ssize_t __kernel_ssize_t typedef int __kernel_ptrdiff_t; -typedef long __kernel_time_t; -typedef long __kernel_suseconds_t; -typedef long __kernel_clock_t; -typedef int __kernel_timer_t; -typedef int __kernel_clockid_t; -typedef int __kernel_daddr_t; -typedef char * __kernel_caddr_t; -typedef unsigned short __kernel_uid16_t; -typedef unsigned short __kernel_gid16_t; +#define __kernel_ptrdiff_t __kernel_ptrdiff_t typedef unsigned int __kernel_uid32_t; +#define __kernel_uid32_t __kernel_uid32_t typedef unsigned int __kernel_gid32_t; +#define __kernel_gid32_t __kernel_gid32_t typedef unsigned short __kernel_old_uid_t; +#define __kernel_old_uid_t __kernel_old_uid_t typedef unsigned short __kernel_old_gid_t; +#define __kernel_old_gid_t __kernel_old_gid_t typedef unsigned short __kernel_old_dev_t; +#define __kernel_old_dev_t __kernel_old_dev_t -#ifdef __GNUC__ -typedef long long __kernel_loff_t; -#endif - -typedef struct { - int val[2]; -} __kernel_fsid_t; - -#if defined(__KERNEL__) - -#undef __FD_SET -static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp) -{ - unsigned long __tmp = __fd / __NFDBITS; - unsigned long __rem = __fd % __NFDBITS; - __fdsetp->fds_bits[__tmp] |= (1UL<<__rem); -} - -#undef __FD_CLR -static __inline__ void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp) -{ - unsigned long __tmp = __fd / __NFDBITS; - unsigned long __rem = __fd % __NFDBITS; - __fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem); -} - - -#undef __FD_ISSET -static __inline__ int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p) -{ - unsigned long __tmp = __fd / __NFDBITS; - unsigned long __rem = __fd % __NFDBITS; - return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0; -} - -/* - * This will unroll the loop for the normal constant case (8 ints, - * for a 256-bit fd_set) - */ -#undef __FD_ZERO -static __inline__ void __FD_ZERO(__kernel_fd_set *__p) -{ - unsigned long *__tmp = __p->fds_bits; - int __i; - - if (__builtin_constant_p(__FDSET_LONGS)) { - switch (__FDSET_LONGS) { - case 16: - __tmp[ 0] = 0; __tmp[ 1] = 0; - __tmp[ 2] = 0; __tmp[ 3] = 0; - __tmp[ 4] = 0; __tmp[ 5] = 0; - __tmp[ 6] = 0; __tmp[ 7] = 0; - __tmp[ 8] = 0; __tmp[ 9] = 0; - __tmp[10] = 0; __tmp[11] = 0; - __tmp[12] = 0; __tmp[13] = 0; - __tmp[14] = 0; __tmp[15] = 0; - return; - - case 8: - __tmp[ 0] = 0; __tmp[ 1] = 0; - __tmp[ 2] = 0; __tmp[ 3] = 0; - __tmp[ 4] = 0; __tmp[ 5] = 0; - __tmp[ 6] = 0; __tmp[ 7] = 0; - return; - - case 4: - __tmp[ 0] = 0; __tmp[ 1] = 0; - __tmp[ 2] = 0; __tmp[ 3] = 0; - return; - } - } - __i = __FDSET_LONGS; - while (__i) { - __i--; - *__tmp = 0; - __tmp++; - } -} - -#endif /* defined(__KERNEL__) */ +#include <asm-generic/posix_types.h> -#endif /* __ASM_SH64_POSIX_TYPES_H */ +#endif /* __ASM_SH_POSIX_TYPES_64_H */ -- cgit v1.1 From 4b1239559ee96850889343bbf902de5129bac2ce Mon Sep 17 00:00:00 2001 From: Paul Mundt <lethal@linux-sh.org> Date: Sun, 14 Jun 2009 23:17:57 +0900 Subject: sh: Convert to asm-generic/termbits.h and termios.h. Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/include/asm/termbits.h | 199 +---------------------------------------- arch/sh/include/asm/termios.h | 91 +------------------ 2 files changed, 2 insertions(+), 288 deletions(-) (limited to 'arch') diff --git a/arch/sh/include/asm/termbits.h b/arch/sh/include/asm/termbits.h index 77db116..3935b10 100644 --- a/arch/sh/include/asm/termbits.h +++ b/arch/sh/include/asm/termbits.h @@ -1,198 +1 @@ -#ifndef __ASM_SH_TERMBITS_H -#define __ASM_SH_TERMBITS_H - -#include <linux/posix_types.h> - -typedef unsigned char cc_t; -typedef unsigned int speed_t; -typedef unsigned int tcflag_t; - -#define NCCS 19 -struct termios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ -}; - -struct termios2 { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -struct ktermios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -/* c_cc characters */ -#define VINTR 0 -#define VQUIT 1 -#define VERASE 2 -#define VKILL 3 -#define VEOF 4 -#define VTIME 5 -#define VMIN 6 -#define VSWTC 7 -#define VSTART 8 -#define VSTOP 9 -#define VSUSP 10 -#define VEOL 11 -#define VREPRINT 12 -#define VDISCARD 13 -#define VWERASE 14 -#define VLNEXT 15 -#define VEOL2 16 - -/* c_iflag bits */ -#define IGNBRK 0000001 -#define BRKINT 0000002 -#define IGNPAR 0000004 -#define PARMRK 0000010 -#define INPCK 0000020 -#define ISTRIP 0000040 -#define INLCR 0000100 -#define IGNCR 0000200 -#define ICRNL 0000400 -#define IUCLC 0001000 -#define IXON 0002000 -#define IXANY 0004000 -#define IXOFF 0010000 -#define IMAXBEL 0020000 -#define IUTF8 0040000 - -/* c_oflag bits */ -#define OPOST 0000001 -#define OLCUC 0000002 -#define ONLCR 0000004 -#define OCRNL 0000010 -#define ONOCR 0000020 -#define ONLRET 0000040 -#define OFILL 0000100 -#define OFDEL 0000200 -#define NLDLY 0000400 -#define NL0 0000000 -#define NL1 0000400 -#define CRDLY 0003000 -#define CR0 0000000 -#define CR1 0001000 -#define CR2 0002000 -#define CR3 0003000 -#define TABDLY 0014000 -#define TAB0 0000000 -#define TAB1 0004000 -#define TAB2 0010000 -#define TAB3 0014000 -#define XTABS 0014000 -#define BSDLY 0020000 -#define BS0 0000000 -#define BS1 0020000 -#define VTDLY 0040000 -#define VT0 0000000 -#define VT1 0040000 -#define FFDLY 0100000 -#define FF0 0000000 -#define FF1 0100000 - -/* c_cflag bit meaning */ -#define CBAUD 0010017 -#define B0 0000000 /* hang up */ -#define B50 0000001 -#define B75 0000002 -#define B110 0000003 -#define B134 0000004 -#define B150 0000005 -#define B200 0000006 -#define B300 0000007 -#define B600 0000010 -#define B1200 0000011 -#define B1800 0000012 -#define B2400 0000013 -#define B4800 0000014 -#define B9600 0000015 -#define B19200 0000016 -#define B38400 0000017 -#define EXTA B19200 -#define EXTB B38400 -#define CSIZE 0000060 -#define CS5 0000000 -#define CS6 0000020 -#define CS7 0000040 -#define CS8 0000060 -#define CSTOPB 0000100 -#define CREAD 0000200 -#define PARENB 0000400 -#define PARODD 0001000 -#define HUPCL 0002000 -#define CLOCAL 0004000 -#define CBAUDEX 0010000 -#define BOTHER 0010000 -#define B57600 0010001 -#define B115200 0010002 -#define B230400 0010003 -#define B460800 0010004 -#define B500000 0010005 -#define B576000 0010006 -#define B921600 0010007 -#define B1000000 0010010 -#define B1152000 0010011 -#define B1500000 0010012 -#define B2000000 0010013 -#define B2500000 0010014 -#define B3000000 0010015 -#define B3500000 0010016 -#define B4000000 0010017 -#define CIBAUD 002003600000 /* input baud rate */ -#define CMSPAR 010000000000 /* mark or space (stick) parity */ -#define CRTSCTS 020000000000 /* flow control */ - -#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ - -/* c_lflag bits */ -#define ISIG 0000001 -#define ICANON 0000002 -#define XCASE 0000004 -#define ECHO 0000010 -#define ECHOE 0000020 -#define ECHOK 0000040 -#define ECHONL 0000100 -#define NOFLSH 0000200 -#define TOSTOP 0000400 -#define ECHOCTL 0001000 -#define ECHOPRT 0002000 -#define ECHOKE 0004000 -#define FLUSHO 0010000 -#define PENDIN 0040000 -#define IEXTEN 0100000 - -/* tcflow() and TCXONC use these */ -#define TCOOFF 0 -#define TCOON 1 -#define TCIOFF 2 -#define TCION 3 - -/* tcflush() and TCFLSH use these */ -#define TCIFLUSH 0 -#define TCOFLUSH 1 -#define TCIOFLUSH 2 - -/* tcsetattr uses these */ -#define TCSANOW 0 -#define TCSADRAIN 1 -#define TCSAFLUSH 2 - -#endif /* __ASM_SH_TERMBITS_H */ +#include <asm-generic/termbits.h> diff --git a/arch/sh/include/asm/termios.h b/arch/sh/include/asm/termios.h index 0a8c793..280d78a 100644 --- a/arch/sh/include/asm/termios.h +++ b/arch/sh/include/asm/termios.h @@ -1,90 +1 @@ -#ifndef __ASM_SH_TERMIOS_H -#define __ASM_SH_TERMIOS_H - -#include <asm/termbits.h> -#include <asm/ioctls.h> - -struct winsize { - unsigned short ws_row; - unsigned short ws_col; - unsigned short ws_xpixel; - unsigned short ws_ypixel; -}; - -#define NCC 8 -struct termio { - unsigned short c_iflag; /* input mode flags */ - unsigned short c_oflag; /* output mode flags */ - unsigned short c_cflag; /* control mode flags */ - unsigned short c_lflag; /* local mode flags */ - unsigned char c_line; /* line discipline */ - unsigned char c_cc[NCC]; /* control characters */ -}; - -/* modem lines */ -#define TIOCM_LE 0x001 -#define TIOCM_DTR 0x002 -#define TIOCM_RTS 0x004 -#define TIOCM_ST 0x008 -#define TIOCM_SR 0x010 -#define TIOCM_CTS 0x020 -#define TIOCM_CAR 0x040 -#define TIOCM_RNG 0x080 -#define TIOCM_DSR 0x100 -#define TIOCM_CD TIOCM_CAR -#define TIOCM_RI TIOCM_RNG -#define TIOCM_OUT1 0x2000 -#define TIOCM_OUT2 0x4000 -#define TIOCM_LOOP 0x8000 - -/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ - -#ifdef __KERNEL__ - -/* intr=^C quit=^\ erase=del kill=^U - eof=^D vtime=\0 vmin=\1 sxtc=\0 - start=^Q stop=^S susp=^Z eol=\0 - reprint=^R discard=^U werase=^W lnext=^V - eol2=\0 -*/ -#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" - -/* - * Translate a "termio" structure into a "termios". Ugh. - */ -#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \ - unsigned short __tmp; \ - get_user(__tmp,&(termio)->x); \ - *(unsigned short *) &(termios)->x = __tmp; \ -} - -#define user_termio_to_kernel_termios(termios, termio) \ -({ \ - SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \ - copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \ -}) - -/* - * Translate a "termios" structure into a "termio". Ugh. - */ -#define kernel_termios_to_user_termio(termio, termios) \ -({ \ - put_user((termios)->c_iflag, &(termio)->c_iflag); \ - put_user((termios)->c_oflag, &(termio)->c_oflag); \ - put_user((termios)->c_cflag, &(termio)->c_cflag); \ - put_user((termios)->c_lflag, &(termio)->c_lflag); \ - put_user((termios)->c_line, &(termio)->c_line); \ - copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ -}) - -#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2)) -#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2)) -#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios)) -#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios)) - -#endif /* __KERNEL__ */ - -#endif /* __ASM_SH_TERMIOS_H */ +#include <asm-generic/termios.h> -- cgit v1.1 From 6f2ea729756e09aa02d5ceb395c2a67323948ab2 Mon Sep 17 00:00:00 2001 From: Paul Mundt <lethal@linux-sh.org> Date: Sun, 14 Jun 2009 23:20:27 +0900 Subject: sh: Convert ipc/shm bits to their asm-generic versions. Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/include/asm/ipcbuf.h | 30 +----------------------------- arch/sh/include/asm/msgbuf.h | 32 +------------------------------- arch/sh/include/asm/sembuf.h | 26 +------------------------- arch/sh/include/asm/shmbuf.h | 43 +------------------------------------------ 4 files changed, 4 insertions(+), 127 deletions(-) (limited to 'arch') diff --git a/arch/sh/include/asm/ipcbuf.h b/arch/sh/include/asm/ipcbuf.h index 5ffc997..84c7e51 100644 --- a/arch/sh/include/asm/ipcbuf.h +++ b/arch/sh/include/asm/ipcbuf.h @@ -1,29 +1 @@ -#ifndef __ASM_SH_IPCBUF_H__ -#define __ASM_SH_IPCBUF_H__ - -/* - * The ipc64_perm structure for i386 architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 32-bit mode_t and seq - * - 2 miscellaneous 32-bit values - */ - -struct ipc64_perm -{ - __kernel_key_t key; - __kernel_uid32_t uid; - __kernel_gid32_t gid; - __kernel_uid32_t cuid; - __kernel_gid32_t cgid; - __kernel_mode_t mode; - unsigned short __pad1; - unsigned short seq; - unsigned short __pad2; - unsigned long __unused1; - unsigned long __unused2; -}; - -#endif /* __ASM_SH_IPCBUF_H__ */ +#include <asm-generic/ipcbuf.h> diff --git a/arch/sh/include/asm/msgbuf.h b/arch/sh/include/asm/msgbuf.h index 5174323..809134c 100644 --- a/arch/sh/include/asm/msgbuf.h +++ b/arch/sh/include/asm/msgbuf.h @@ -1,31 +1 @@ -#ifndef __ASM_SH_MSGBUF_H -#define __ASM_SH_MSGBUF_H - -/* - * The msqid64_ds structure for i386 architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct msqid64_ds { - struct ipc64_perm msg_perm; - __kernel_time_t msg_stime; /* last msgsnd time */ - unsigned long __unused1; - __kernel_time_t msg_rtime; /* last msgrcv time */ - unsigned long __unused2; - __kernel_time_t msg_ctime; /* last change time */ - unsigned long __unused3; - unsigned long msg_cbytes; /* current number of bytes on queue */ - unsigned long msg_qnum; /* number of messages in queue */ - unsigned long msg_qbytes; /* max number of bytes on queue */ - __kernel_pid_t msg_lspid; /* pid of last msgsnd */ - __kernel_pid_t msg_lrpid; /* last receive pid */ - unsigned long __unused4; - unsigned long __unused5; -}; - -#endif /* __ASM_SH_MSGBUF_H */ +#include <asm-generic/msgbuf.h> diff --git a/arch/sh/include/asm/sembuf.h b/arch/sh/include/asm/sembuf.h index d79f3bd..7673b83 100644 --- a/arch/sh/include/asm/sembuf.h +++ b/arch/sh/include/asm/sembuf.h @@ -1,25 +1 @@ -#ifndef __ASM_SH_SEMBUF_H -#define __ASM_SH_SEMBUF_H - -/* - * The semid64_ds structure for i386 architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct semid64_ds { - struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ - __kernel_time_t sem_otime; /* last semop time */ - unsigned long __unused1; - __kernel_time_t sem_ctime; /* last change time */ - unsigned long __unused2; - unsigned long sem_nsems; /* no. of semaphores in array */ - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* __ASM_SH_SEMBUF_H */ +#include <asm-generic/sembuf.h> diff --git a/arch/sh/include/asm/shmbuf.h b/arch/sh/include/asm/shmbuf.h index b2101f4..83c05fc 100644 --- a/arch/sh/include/asm/shmbuf.h +++ b/arch/sh/include/asm/shmbuf.h @@ -1,42 +1 @@ -#ifndef __ASM_SH_SHMBUF_H -#define __ASM_SH_SHMBUF_H - -/* - * The shmid64_ds structure for i386 architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct shmid64_ds { - struct ipc64_perm shm_perm; /* operation perms */ - size_t shm_segsz; /* size of segment (bytes) */ - __kernel_time_t shm_atime; /* last attach time */ - unsigned long __unused1; - __kernel_time_t shm_dtime; /* last detach time */ - unsigned long __unused2; - __kernel_time_t shm_ctime; /* last change time */ - unsigned long __unused3; - __kernel_pid_t shm_cpid; /* pid of creator */ - __kernel_pid_t shm_lpid; /* pid of last operator */ - unsigned long shm_nattch; /* no. of current attaches */ - unsigned long __unused4; - unsigned long __unused5; -}; - -struct shminfo64 { - unsigned long shmmax; - unsigned long shmmin; - unsigned long shmmni; - unsigned long shmseg; - unsigned long shmall; - unsigned long __unused1; - unsigned long __unused2; - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* __ASM_SH_SHMBUF_H */ +#include <asm-generic/shmbuf.h> -- cgit v1.1 From f8f06bc74b5afbb434b8f3982db19acdbf48dee9 Mon Sep 17 00:00:00 2001 From: Paul Mundt <lethal@linux-sh.org> Date: Sun, 14 Jun 2009 23:21:54 +0900 Subject: sh: Tidy up duplication in irq/swab/timex.h. The asm-generic versions have some helper definitions that we can use instead, drop our definitions and use those instead. Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/include/asm/irq.h | 2 +- arch/sh/include/asm/swab.h | 3 +-- arch/sh/include/asm/timex.h | 7 +------ 3 files changed, 3 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/sh/include/asm/irq.h b/arch/sh/include/asm/irq.h index a2b8c99..df8e150 100644 --- a/arch/sh/include/asm/irq.h +++ b/arch/sh/include/asm/irq.h @@ -39,7 +39,6 @@ static inline int generic_irq_demux(int irq) return irq; } -#define irq_canonicalize(irq) (irq) #define irq_demux(irq) sh_mv.mv_irq_demux(irq) void init_IRQ(void); @@ -54,6 +53,7 @@ extern void irq_ctx_exit(int cpu); # define irq_ctx_exit(cpu) do { } while (0) #endif +#include <asm-generic/irq.h> #ifdef CONFIG_CPU_SH5 #include <cpu/irq.h> #endif diff --git a/arch/sh/include/asm/swab.h b/arch/sh/include/asm/swab.h index 0e08fe5..1cd0976 100644 --- a/arch/sh/include/asm/swab.h +++ b/arch/sh/include/asm/swab.h @@ -7,8 +7,7 @@ */ #include <linux/compiler.h> #include <linux/types.h> - -#define __SWAB_64_THRU_32__ +#include <asm-generic/swab.h> static inline __attribute_const__ __u32 __arch_swab32(__u32 x) { diff --git a/arch/sh/include/asm/timex.h b/arch/sh/include/asm/timex.h index a873e24..b556d49 100644 --- a/arch/sh/include/asm/timex.h +++ b/arch/sh/include/asm/timex.h @@ -8,11 +8,6 @@ #define CLOCK_TICK_RATE (CONFIG_SH_PCLK_FREQ / 4) /* Underlying HZ */ -typedef unsigned long long cycles_t; - -static __inline__ cycles_t get_cycles (void) -{ - return 0; -} +#include <asm-generic/timex.h> #endif /* __ASM_SH_TIMEX_H */ -- cgit v1.1 From 7b2758228f2d554316288ef650fe5a08e3b2c559 Mon Sep 17 00:00:00 2001 From: Paul Mundt <lethal@linux-sh.org> Date: Sun, 14 Jun 2009 23:23:41 +0900 Subject: sh: Conver to asm-generic/mmu_context.h. Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/include/asm/mmu_context.h | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/sh/include/asm/mmu_context.h b/arch/sh/include/asm/mmu_context.h index 2c987f5..67d8946 100644 --- a/arch/sh/include/asm/mmu_context.h +++ b/arch/sh/include/asm/mmu_context.h @@ -129,23 +129,23 @@ static inline void switch_mm(struct mm_struct *prev, if (!cpumask_test_and_set_cpu(cpu, mm_cpumask(next))) activate_context(next, cpu); } + +#define activate_mm(prev, next) switch_mm((prev),(next),NULL) +#define deactivate_mm(tsk,mm) do { } while (0) +#define enter_lazy_tlb(mm,tsk) do { } while (0) + #else -#define get_mmu_context(mm) do { } while (0) -#define init_new_context(tsk,mm) (0) -#define destroy_context(mm) do { } while (0) + #define set_asid(asid) do { } while (0) #define get_asid() (0) #define cpu_asid(cpu, mm) ({ (void)cpu; NO_CONTEXT; }) #define switch_and_save_asid(asid) (0) #define set_TTB(pgd) do { } while (0) #define get_TTB() (0) -#define activate_context(mm,cpu) do { } while (0) -#define switch_mm(prev,next,tsk) do { } while (0) -#endif /* CONFIG_MMU */ -#define activate_mm(prev, next) switch_mm((prev),(next),NULL) -#define deactivate_mm(tsk,mm) do { } while (0) -#define enter_lazy_tlb(mm,tsk) do { } while (0) +#include <asm-generic/mmu_context.h> + +#endif /* CONFIG_MMU */ #if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4) /* -- cgit v1.1 From 5db455bd55654c8a963191d6458ff1c20993f8bb Mon Sep 17 00:00:00 2001 From: Paul Mundt <lethal@linux-sh.org> Date: Sun, 14 Jun 2009 23:24:14 +0900 Subject: sh: Convert to asm-generic/module.h. Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/include/asm/module.h | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/sh/include/asm/module.h b/arch/sh/include/asm/module.h index 46eccd3..068bf16 100644 --- a/arch/sh/include/asm/module.h +++ b/arch/sh/include/asm/module.h @@ -1,17 +1,7 @@ #ifndef _ASM_SH_MODULE_H #define _ASM_SH_MODULE_H -/* - * This file contains the SH architecture specific module code. - */ - -struct mod_arch_specific { - /* Nothing to see here .. */ -}; - -#define Elf_Shdr Elf32_Shdr -#define Elf_Sym Elf32_Sym -#define Elf_Ehdr Elf32_Ehdr +#include <asm-generic/module.h> #ifdef CONFIG_CPU_LITTLE_ENDIAN # ifdef CONFIG_CPU_SH2 -- cgit v1.1 From 508fb69886bde5a346f2fe0b550eb49e969f0ac5 Mon Sep 17 00:00:00 2001 From: Paul Mundt <lethal@linux-sh.org> Date: Sun, 14 Jun 2009 23:24:43 +0900 Subject: sh: Convert to asm-generic/unaligned.h. Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/include/asm/unaligned.h | 14 +------------- 1 file changed, 1 insertion(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/sh/include/asm/unaligned.h b/arch/sh/include/asm/unaligned.h index 8c0ad5e..7d14e06 100644 --- a/arch/sh/include/asm/unaligned.h +++ b/arch/sh/include/asm/unaligned.h @@ -6,19 +6,7 @@ #include <asm/unaligned-sh4a.h> #else /* Otherwise, SH can't handle unaligned accesses. */ -#ifdef __LITTLE_ENDIAN__ -# include <linux/unaligned/le_struct.h> -# include <linux/unaligned/be_byteshift.h> -# include <linux/unaligned/generic.h> -# define get_unaligned __get_unaligned_le -# define put_unaligned __put_unaligned_le -#else -# include <linux/unaligned/be_struct.h> -# include <linux/unaligned/le_byteshift.h> -# include <linux/unaligned/generic.h> -# define get_unaligned __get_unaligned_be -# define put_unaligned __put_unaligned_be -#endif +#include <asm-generic/unaligned.h> #endif #endif /* _ASM_SH_UNALIGNED_H */ -- cgit v1.1 From 84f8369015bd4ea9f487a164a3b08d5ec96d6fe1 Mon Sep 17 00:00:00 2001 From: Paul Mundt <lethal@linux-sh.org> Date: Sun, 14 Jun 2009 23:25:04 +0900 Subject: sh: Convert to asm-generic/scatterlist.h. Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/include/asm/scatterlist.h | 24 ++---------------------- 1 file changed, 2 insertions(+), 22 deletions(-) (limited to 'arch') diff --git a/arch/sh/include/asm/scatterlist.h b/arch/sh/include/asm/scatterlist.h index c693d26..327cc2e 100644 --- a/arch/sh/include/asm/scatterlist.h +++ b/arch/sh/include/asm/scatterlist.h @@ -1,28 +1,8 @@ #ifndef __ASM_SH_SCATTERLIST_H #define __ASM_SH_SCATTERLIST_H -#include <asm/types.h> - -struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif - unsigned long page_link; - unsigned int offset; /* for highmem, page offset */ - unsigned int length; - dma_addr_t dma_address; - unsigned int dma_length; -}; - #define ISA_DMA_THRESHOLD PHYS_ADDR_MASK -/* These macros should be used after a pci_map_sg call has been done - * to get bus addresses of each of the SG entries and their lengths. - * You should only work with the number of sg entries pci_map_sg - * returns, or alternatively stop on the first sg_dma_len(sg) which - * is 0. - */ -#define sg_dma_address(sg) ((sg)->dma_address) -#define sg_dma_len(sg) ((sg)->length) +#include <asm-generic/scatterlist.h> -#endif /* !(__ASM_SH_SCATTERLIST_H) */ +#endif /* __ASM_SH_SCATTERLIST_H */ -- cgit v1.1 From a8bd4683134affa76f2edd3a6b8b526832722242 Mon Sep 17 00:00:00 2001 From: Paul Mundt <lethal@linux-sh.org> Date: Sun, 14 Jun 2009 23:25:27 +0900 Subject: sh: Convert to asm-generic/types.h. Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/include/asm/types.h | 16 +--------------- 1 file changed, 1 insertion(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/sh/include/asm/types.h b/arch/sh/include/asm/types.h index b13caca..c7f3c94 100644 --- a/arch/sh/include/asm/types.h +++ b/arch/sh/include/asm/types.h @@ -1,27 +1,14 @@ #ifndef __ASM_SH_TYPES_H #define __ASM_SH_TYPES_H -#include <asm-generic/int-ll64.h> - -#ifndef __ASSEMBLY__ - -typedef unsigned short umode_t; - -#endif /* __ASSEMBLY__ */ +#include <asm-generic/types.h> /* * These aren't exported outside the kernel to avoid name space clashes */ #ifdef __KERNEL__ - -#define BITS_PER_LONG 32 - #ifndef __ASSEMBLY__ -/* Dma addresses are 32-bits wide. */ - -typedef u32 dma_addr_t; - #ifdef CONFIG_SUPERH32 typedef u16 insn_size_t; #else @@ -29,7 +16,6 @@ typedef u32 insn_size_t; #endif #endif /* __ASSEMBLY__ */ - #endif /* __KERNEL__ */ #endif /* __ASM_SH_TYPES_H */ -- cgit v1.1 From bdc90d461d576505114168c4b8237a3f6789ecba Mon Sep 17 00:00:00 2001 From: Paul Mundt <lethal@linux-sh.org> Date: Sun, 14 Jun 2009 23:25:57 +0900 Subject: sh: Convert to asm-generic/signal.h. Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/include/asm/signal.h | 147 +------------------------------------------ 1 file changed, 1 insertion(+), 146 deletions(-) (limited to 'arch') diff --git a/arch/sh/include/asm/signal.h b/arch/sh/include/asm/signal.h index 9cc5f01..9ac530a 100644 --- a/arch/sh/include/asm/signal.h +++ b/arch/sh/include/asm/signal.h @@ -1,114 +1,10 @@ #ifndef __ASM_SH_SIGNAL_H #define __ASM_SH_SIGNAL_H -#include <linux/types.h> - -/* Avoid too many header ordering problems. */ -struct pt_regs; -struct siginfo; - -#ifdef __KERNEL__ -/* Most things should be clean enough to redefine this at will, if care - is taken to make libc match. */ - -#define _NSIG 64 -#define _NSIG_BPW 32 -#define _NSIG_WORDS (_NSIG / _NSIG_BPW) - -typedef unsigned long old_sigset_t; /* at least 32 bits */ - -typedef struct { - unsigned long sig[_NSIG_WORDS]; -} sigset_t; - -#else -/* Here we must cater to libcs that poke about in kernel headers. */ - -#define NSIG 32 -typedef unsigned long sigset_t; - -#endif /* __KERNEL__ */ - -#define SIGHUP 1 -#define SIGINT 2 -#define SIGQUIT 3 -#define SIGILL 4 -#define SIGTRAP 5 -#define SIGABRT 6 -#define SIGIOT 6 -#define SIGBUS 7 -#define SIGFPE 8 -#define SIGKILL 9 -#define SIGUSR1 10 -#define SIGSEGV 11 -#define SIGUSR2 12 -#define SIGPIPE 13 -#define SIGALRM 14 -#define SIGTERM 15 -#define SIGSTKFLT 16 -#define SIGCHLD 17 -#define SIGCONT 18 -#define SIGSTOP 19 -#define SIGTSTP 20 -#define SIGTTIN 21 -#define SIGTTOU 22 -#define SIGURG 23 -#define SIGXCPU 24 -#define SIGXFSZ 25 -#define SIGVTALRM 26 -#define SIGPROF 27 -#define SIGWINCH 28 -#define SIGIO 29 -#define SIGPOLL SIGIO -/* -#define SIGLOST 29 -*/ -#define SIGPWR 30 -#define SIGSYS 31 -#define SIGUNUSED 31 - -/* These should not be considered constants from userland. */ -#define SIGRTMIN 32 -#define SIGRTMAX _NSIG - -/* - * SA_FLAGS values: - * - * SA_ONSTACK indicates that a registered stack_t will be used. - * SA_RESTART flag to get restarting signals (which were the default long ago) - * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. - * SA_RESETHAND clears the handler when the signal is delivered. - * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. - * SA_NODEFER prevents the current signal from being masked in the handler. - * - * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single - * Unix names RESETHAND and NODEFER respectively. - */ -#define SA_NOCLDSTOP 0x00000001 -#define SA_NOCLDWAIT 0x00000002 -#define SA_SIGINFO 0x00000004 -#define SA_ONSTACK 0x08000000 -#define SA_RESTART 0x10000000 -#define SA_NODEFER 0x40000000 -#define SA_RESETHAND 0x80000000 - -#define SA_NOMASK SA_NODEFER -#define SA_ONESHOT SA_RESETHAND - #define SA_RESTORER 0x04000000 -/* - * sigaltstack controls - */ -#define SS_ONSTACK 1 -#define SS_DISABLE 2 - -#define MINSIGSTKSZ 2048 -#define SIGSTKSZ 8192 +#include <asm-generic/signal.h> -#include <asm-generic/signal-defs.h> - -#ifdef __KERNEL__ struct old_sigaction { __sighandler_t sa_handler; old_sigset_t sa_mask; @@ -116,45 +12,4 @@ struct old_sigaction { void (*sa_restorer)(void); }; -struct sigaction { - __sighandler_t sa_handler; - unsigned long sa_flags; - void (*sa_restorer)(void); - sigset_t sa_mask; /* mask last for extensibility */ -}; - -struct k_sigaction { - struct sigaction sa; -}; -#else -/* Here we must cater to libcs that poke about in kernel headers. */ - -struct sigaction { - union { - __sighandler_t _sa_handler; - void (*_sa_sigaction)(int, struct siginfo *, void *); - } _u; - sigset_t sa_mask; - unsigned long sa_flags; - void (*sa_restorer)(void); -}; - -#define sa_handler _u._sa_handler -#define sa_sigaction _u._sa_sigaction - -#endif /* __KERNEL__ */ - -typedef struct sigaltstack { - void *ss_sp; - int ss_flags; - size_t ss_size; -} stack_t; - -#ifdef __KERNEL__ -#include <asm/sigcontext.h> - -#define ptrace_signal_deliver(regs, cookie) do { } while (0) - -#endif /* __KERNEL__ */ - #endif /* __ASM_SH_SIGNAL_H */ -- cgit v1.1 From 7fb8156d50c7bf3eb183c308cc63be827c6944a9 Mon Sep 17 00:00:00 2001 From: Paul Mundt <lethal@linux-sh.org> Date: Sun, 14 Jun 2009 23:26:48 +0900 Subject: sh: Switch to asm-generic versions for identical headers. This switches over mman/param/parport/serial/socket/ucontext.h. Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/include/asm/mman.h | 18 +------------ arch/sh/include/asm/param.h | 23 +--------------- arch/sh/include/asm/parport.h | 17 +----------- arch/sh/include/asm/serial.h | 20 +------------- arch/sh/include/asm/socket.h | 61 +----------------------------------------- arch/sh/include/asm/ucontext.h | 13 +-------- 6 files changed, 6 insertions(+), 146 deletions(-) (limited to 'arch') diff --git a/arch/sh/include/asm/mman.h b/arch/sh/include/asm/mman.h index 7d8b72c..8eebf89 100644 --- a/arch/sh/include/asm/mman.h +++ b/arch/sh/include/asm/mman.h @@ -1,17 +1 @@ -#ifndef __ASM_SH_MMAN_H -#define __ASM_SH_MMAN_H - -#include <asm-generic/mman-common.h> - -#define MAP_GROWSDOWN 0x0100 /* stack-like segment */ -#define MAP_DENYWRITE 0x0800 /* ETXTBSY */ -#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */ -#define MAP_LOCKED 0x2000 /* pages are locked */ -#define MAP_NORESERVE 0x4000 /* don't check for reservations */ -#define MAP_POPULATE 0x8000 /* populate (prefault) page tables */ -#define MAP_NONBLOCK 0x10000 /* do not block on IO */ - -#define MCL_CURRENT 1 /* lock all current mappings */ -#define MCL_FUTURE 2 /* lock all future mappings */ - -#endif /* __ASM_SH_MMAN_H */ +#include <asm-generic/mman.h> diff --git a/arch/sh/include/asm/param.h b/arch/sh/include/asm/param.h index ae245af..965d454 100644 --- a/arch/sh/include/asm/param.h +++ b/arch/sh/include/asm/param.h @@ -1,22 +1 @@ -#ifndef __ASM_SH_PARAM_H -#define __ASM_SH_PARAM_H - -#ifdef __KERNEL__ -# define HZ CONFIG_HZ -# define USER_HZ 100 /* User interfaces are in "ticks" */ -# define CLOCKS_PER_SEC (USER_HZ) /* frequency at which times() counts */ -#endif - -#ifndef HZ -#define HZ 100 -#endif - -#define EXEC_PAGESIZE 4096 - -#ifndef NOGROUP -#define NOGROUP (-1) -#endif - -#define MAXHOSTNAMELEN 64 /* max length of hostname */ - -#endif /* __ASM_SH_PARAM_H */ +#include <asm-generic/param.h> diff --git a/arch/sh/include/asm/parport.h b/arch/sh/include/asm/parport.h index f67ba60..cf252af 100644 --- a/arch/sh/include/asm/parport.h +++ b/arch/sh/include/asm/parport.h @@ -1,16 +1 @@ -/* - * Copyright (C) 1999, 2000 Tim Waugh <tim@cyberelk.demon.co.uk> - * - * This file should only be included by drivers/parport/parport_pc.c. - */ -#ifndef __ASM_SH_PARPORT_H -#define __ASM_SH_PARPORT_H - -static int __devinit parport_pc_find_isa_ports(int autoirq, int autodma); - -static int __devinit parport_pc_find_nonpci_ports(int autoirq, int autodma) -{ - return parport_pc_find_isa_ports(autoirq, autodma); -} - -#endif /* __ASM_SH_PARPORT_H */ +#include <asm-generic/parport.h> diff --git a/arch/sh/include/asm/serial.h b/arch/sh/include/asm/serial.h index 11f854d..a0cb0caf 100644 --- a/arch/sh/include/asm/serial.h +++ b/arch/sh/include/asm/serial.h @@ -1,19 +1 @@ -/* - * include/asm-sh/serial.h - * - * Configuration details for 8250, 16450, 16550, etc. serial ports - */ - -#ifndef _ASM_SERIAL_H -#define _ASM_SERIAL_H - -/* - * This assumes you have a 1.8432 MHz clock for your UART. - * - * It'd be nice if someone built a serial card with a 24.576 MHz - * clock, since the 16550A is capable of handling a top speed of 1.5 - * megabits/second; but this requires the faster clock. - */ -#define BASE_BAUD ( 1843200 / 16 ) - -#endif /* _ASM_SERIAL_H */ +#include <asm-generic/serial.h> diff --git a/arch/sh/include/asm/socket.h b/arch/sh/include/asm/socket.h index 345653b..6b71384 100644 --- a/arch/sh/include/asm/socket.h +++ b/arch/sh/include/asm/socket.h @@ -1,60 +1 @@ -#ifndef __ASM_SH_SOCKET_H -#define __ASM_SH_SOCKET_H - -#include <asm/sockios.h> - -/* For setsockopt(2) */ -#define SOL_SOCKET 1 - -#define SO_DEBUG 1 -#define SO_REUSEADDR 2 -#define SO_TYPE 3 -#define SO_ERROR 4 -#define SO_DONTROUTE 5 -#define SO_BROADCAST 6 -#define SO_SNDBUF 7 -#define SO_RCVBUF 8 -#define SO_RCVBUFFORCE 32 -#define SO_SNDBUFFORCE 33 -#define SO_KEEPALIVE 9 -#define SO_OOBINLINE 10 -#define SO_NO_CHECK 11 -#define SO_PRIORITY 12 -#define SO_LINGER 13 -#define SO_BSDCOMPAT 14 -/* To add :#define SO_REUSEPORT 15 */ -#define SO_PASSCRED 16 -#define SO_PEERCRED 17 -#define SO_RCVLOWAT 18 -#define SO_SNDLOWAT 19 -#define SO_RCVTIMEO 20 -#define SO_SNDTIMEO 21 - -/* Security levels - as per NRL IPv6 - don't actually do anything */ -#define SO_SECURITY_AUTHENTICATION 22 -#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 -#define SO_SECURITY_ENCRYPTION_NETWORK 24 - -#define SO_BINDTODEVICE 25 - -/* Socket filtering */ -#define SO_ATTACH_FILTER 26 -#define SO_DETACH_FILTER 27 - -#define SO_PEERNAME 28 -#define SO_TIMESTAMP 29 -#define SCM_TIMESTAMP SO_TIMESTAMP - -#define SO_ACCEPTCONN 30 - -#define SO_PEERSEC 31 -#define SO_PASSSEC 34 -#define SO_TIMESTAMPNS 35 -#define SCM_TIMESTAMPNS SO_TIMESTAMPNS - -#define SO_MARK 36 - -#define SO_TIMESTAMPING 37 -#define SCM_TIMESTAMPING SO_TIMESTAMPING - -#endif /* __ASM_SH_SOCKET_H */ +#include <asm-generic/socket.h> diff --git a/arch/sh/include/asm/ucontext.h b/arch/sh/include/asm/ucontext.h index 202ef1d..9bc07b9 100644 --- a/arch/sh/include/asm/ucontext.h +++ b/arch/sh/include/asm/ucontext.h @@ -1,12 +1 @@ -#ifndef __ASM_SH_UCONTEXT_H -#define __ASM_SH_UCONTEXT_H - -struct ucontext { - unsigned long uc_flags; - struct ucontext *uc_link; - stack_t uc_stack; - struct sigcontext uc_mcontext; - sigset_t uc_sigmask; /* mask last for extensibility */ -}; - -#endif /* __ASM_SH_UCONTEXT_H */ +#include <asm-generic/ucontext.h> -- cgit v1.1 From 2b74b85693c7c0772e8787883230cd15314555f8 Mon Sep 17 00:00:00 2001 From: Paul Mundt <lethal@linux-sh.org> Date: Sun, 14 Jun 2009 23:27:41 +0900 Subject: sh: Derive COMMAND_LINE_SIZE from asm-generic/setup.h. Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/include/asm/setup.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sh/include/asm/setup.h b/arch/sh/include/asm/setup.h index d450bcf..ce37435 100644 --- a/arch/sh/include/asm/setup.h +++ b/arch/sh/include/asm/setup.h @@ -1,7 +1,7 @@ #ifndef _SH_SETUP_H #define _SH_SETUP_H -#define COMMAND_LINE_SIZE 256 +#include <asm-generic/setup.h> #ifdef __KERNEL__ /* -- cgit v1.1 From 3767f3f1ee11da55760616a2c68a09c02babdd9b Mon Sep 17 00:00:00 2001 From: Paul Mundt <lethal@linux-sh.org> Date: Mon, 15 Jun 2009 00:00:42 +0900 Subject: sh: Convert sh64 to use the generic checksum code. This plugs in GENERIC_CSUM support on sh64, and kills off all of the old references. Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/Kconfig | 4 + arch/sh/include/asm/checksum.h | 2 +- arch/sh/include/asm/checksum_64.h | 78 -------------- arch/sh/kernel/sh_ksyms_64.c | 7 -- arch/sh/lib64/Makefile | 2 +- arch/sh/lib64/c-checksum.c | 214 -------------------------------------- 6 files changed, 6 insertions(+), 301 deletions(-) delete mode 100644 arch/sh/include/asm/checksum_64.h delete mode 100644 arch/sh/lib64/c-checksum.c (limited to 'arch') diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 586cd04..739a12d 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -50,6 +50,10 @@ config GENERIC_BUG def_bool y depends on BUG && SUPERH32 +config GENERIC_CSUM + def_bool y + depends on SUPERH64 + config GENERIC_FIND_NEXT_BIT def_bool y diff --git a/arch/sh/include/asm/checksum.h b/arch/sh/include/asm/checksum.h index 67496ab..fc26d1f 100644 --- a/arch/sh/include/asm/checksum.h +++ b/arch/sh/include/asm/checksum.h @@ -1,5 +1,5 @@ #ifdef CONFIG_SUPERH32 # include "checksum_32.h" #else -# include "checksum_64.h" +# include <asm-generic/checksum.h> #endif diff --git a/arch/sh/include/asm/checksum_64.h b/arch/sh/include/asm/checksum_64.h deleted file mode 100644 index 9c62a03..0000000 --- a/arch/sh/include/asm/checksum_64.h +++ /dev/null @@ -1,78 +0,0 @@ -#ifndef __ASM_SH_CHECKSUM_64_H -#define __ASM_SH_CHECKSUM_64_H - -/* - * include/asm-sh/checksum_64.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -/* - * computes the checksum of a memory block at buff, length len, - * and adds in "sum" (32-bit) - * - * returns a 32-bit number suitable for feeding into itself - * or csum_tcpudp_magic - * - * this function must be called with even lengths, except - * for the last fragment, which may be odd - * - * it's best to have buff aligned on a 32-bit boundary - */ -asmlinkage __wsum csum_partial(const void *buff, int len, __wsum sum); - -/* - * Note: when you get a NULL pointer exception here this means someone - * passed in an incorrect kernel address to one of these functions. - * - * If you use these functions directly please don't forget the - * access_ok(). - */ - - -__wsum csum_partial_copy_nocheck(const void *src, void *dst, int len, - __wsum sum); - -__wsum csum_partial_copy_from_user(const void __user *src, void *dst, - int len, __wsum sum, int *err_ptr); - -static inline __sum16 csum_fold(__wsum csum) -{ - u32 sum = (__force u32)csum; - sum = (sum & 0xffff) + (sum >> 16); - sum = (sum & 0xffff) + (sum >> 16); - return (__force __sum16)~sum; -} - -__sum16 ip_fast_csum(const void *iph, unsigned int ihl); - -__wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr, - unsigned short len, unsigned short proto, - __wsum sum); - -/* - * computes the checksum of the TCP/UDP pseudo-header - * returns a 16-bit checksum, already complemented - */ -static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr, - unsigned short len, - unsigned short proto, - __wsum sum) -{ - return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum)); -} - -/* - * this routine is used for miscellaneous IP-like checksums, mainly - * in icmp.c - */ -static inline __sum16 ip_compute_csum(const void *buff, int len) -{ - return csum_fold(csum_partial(buff, len, 0)); -} - -#endif /* __ASM_SH_CHECKSUM_64_H */ diff --git a/arch/sh/kernel/sh_ksyms_64.c b/arch/sh/kernel/sh_ksyms_64.c index 8f54ef0..f5bd156 100644 --- a/arch/sh/kernel/sh_ksyms_64.c +++ b/arch/sh/kernel/sh_ksyms_64.c @@ -38,13 +38,6 @@ EXPORT_SYMBOL(clear_user_page); EXPORT_SYMBOL(flush_dcache_page); #endif -/* Networking helper routines. */ -EXPORT_SYMBOL(csum_partial); -EXPORT_SYMBOL(csum_partial_copy_nocheck); -#ifdef CONFIG_IPV6 -EXPORT_SYMBOL(csum_ipv6_magic); -#endif - #ifdef CONFIG_VT EXPORT_SYMBOL(screen_info); #endif diff --git a/arch/sh/lib64/Makefile b/arch/sh/lib64/Makefile index 4bacb9e..334bb2d 100644 --- a/arch/sh/lib64/Makefile +++ b/arch/sh/lib64/Makefile @@ -10,7 +10,7 @@ # # Panic should really be compiled as PIC -lib-y := udelay.o c-checksum.o dbg.o panic.o memcpy.o memset.o \ +lib-y := udelay.o dbg.o panic.o memcpy.o memset.o \ copy_user_memcpy.o copy_page.o clear_page.o strcpy.o strlen.o # Extracted from libgcc diff --git a/arch/sh/lib64/c-checksum.c b/arch/sh/lib64/c-checksum.c deleted file mode 100644 index 73c0877..0000000 --- a/arch/sh/lib64/c-checksum.c +++ /dev/null @@ -1,214 +0,0 @@ -/* - * arch/sh/lib64/c-checksum.c - * - * This file contains network checksum routines that are better done - * in an architecture-specific manner due to speed.. - */ -#include <linux/string.h> -#include <linux/errno.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <asm/byteorder.h> -#include <asm/uaccess.h> - -static inline unsigned short from64to16(unsigned long long x) -{ - /* add up 32-bit words for 33 bits */ - x = (x & 0xffffffff) + (x >> 32); - /* add up 16-bit and 17-bit words for 17+c bits */ - x = (x & 0xffff) + (x >> 16); - /* add up 16-bit and 2-bit for 16+c bit */ - x = (x & 0xffff) + (x >> 16); - /* add up carry.. */ - x = (x & 0xffff) + (x >> 16); - return x; -} - -static inline unsigned short foldto16(unsigned long x) -{ - /* add up 16-bit for 17 bits */ - x = (x & 0xffff) + (x >> 16); - /* add up carry.. */ - x = (x & 0xffff) + (x >> 16); - return x; -} - -static inline unsigned short myfoldto16(unsigned long long x) -{ - /* Fold down to 32-bits so we don't lose in the typedef-less - network stack. */ - /* 64 to 33 */ - x = (x & 0xffffffff) + (x >> 32); - /* 33 to 32 */ - x = (x & 0xffffffff) + (x >> 32); - - /* add up 16-bit for 17 bits */ - x = (x & 0xffff) + (x >> 16); - /* add up carry.. */ - x = (x & 0xffff) + (x >> 16); - return x; -} - -#define odd(x) ((x)&1) -#define U16(x) ntohs(x) - -static unsigned long do_csum(const unsigned char *buff, int len) -{ - int odd, count; - unsigned long result = 0; - - pr_debug("do_csum buff %p, len %d (0x%x)\n", buff, len, len); -#ifdef DEBUG - for (i = 0; i < len; i++) { - if ((i % 26) == 0) - printk("\n"); - printk("%02X ", buff[i]); - } -#endif - - if (len <= 0) - goto out; - - odd = 1 & (unsigned long) buff; - if (odd) { - result = *buff << 8; - len--; - buff++; - } - count = len >> 1; /* nr of 16-bit words.. */ - if (count) { - if (2 & (unsigned long) buff) { - result += *(unsigned short *) buff; - count--; - len -= 2; - buff += 2; - } - count >>= 1; /* nr of 32-bit words.. */ - if (count) { - unsigned long carry = 0; - do { - unsigned long w = *(unsigned long *) buff; - buff += 4; - count--; - result += carry; - result += w; - carry = (w > result); - } while (count); - result += carry; - result = (result & 0xffff) + (result >> 16); - } - if (len & 2) { - result += *(unsigned short *) buff; - buff += 2; - } - } - if (len & 1) - result += *buff; - result = foldto16(result); - if (odd) - result = ((result >> 8) & 0xff) | ((result & 0xff) << 8); - - pr_debug("\nCHECKSUM is 0x%lx\n", result); - - out: - return result; -} - -/* computes the checksum of a memory block at buff, length len, - and adds in "sum" (32-bit) */ -__wsum csum_partial(const void *buff, int len, __wsum sum) -{ - unsigned long long result = do_csum(buff, len); - - /* add in old sum, and carry.. */ - result += (__force u32)sum; - /* 32+c bits -> 32 bits */ - result = (result & 0xffffffff) + (result >> 32); - - pr_debug("csum_partial, buff %p len %d sum 0x%x result=0x%016Lx\n", - buff, len, sum, result); - - return (__force __wsum)result; -} - -/* Copy while checksumming, otherwise like csum_partial. */ -__wsum -csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum) -{ - sum = csum_partial(src, len, sum); - memcpy(dst, src, len); - - return sum; -} - -/* Copy from userspace and compute checksum. If we catch an exception - then zero the rest of the buffer. */ -__wsum -csum_partial_copy_from_user(const void __user *src, void *dst, int len, - __wsum sum, int *err_ptr) -{ - int missing; - - pr_debug - ("csum_partial_copy_from_user src %p, dest %p, len %d, sum %08x, err_ptr %p\n", - src, dst, len, sum, err_ptr); - missing = copy_from_user(dst, src, len); - pr_debug(" access_ok %d\n", __access_ok((unsigned long) src, len)); - pr_debug(" missing %d\n", missing); - if (missing) { - memset(dst + len - missing, 0, missing); - *err_ptr = -EFAULT; - } - - return csum_partial(dst, len, sum); -} - -/* Copy to userspace and compute checksum. */ -__wsum -csum_partial_copy_to_user(const unsigned char *src, unsigned char *dst, int len, - __wsum sum, int *err_ptr) -{ - sum = csum_partial(src, len, sum); - - if (copy_to_user(dst, src, len)) - *err_ptr = -EFAULT; - - return sum; -} - -/* - * This is a version of ip_compute_csum() optimized for IP headers, - * which always checksum on 4 octet boundaries. - */ -__sum16 ip_fast_csum(const void *iph, unsigned int ihl) -{ - pr_debug("ip_fast_csum %p,%d\n", iph, ihl); - - return (__force __sum16)~do_csum(iph, ihl * 4); -} - -__wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr, - unsigned short len, - unsigned short proto, __wsum sum) -{ - unsigned long long result; - - pr_debug("ntohs(0x%x)=0x%x\n", 0xdead, ntohs(0xdead)); - pr_debug("htons(0x%x)=0x%x\n", 0xdead, htons(0xdead)); - - result = (__force u64) saddr + (__force u64) daddr + - (__force u64) sum + ((len + proto) << 8); - - /* Fold down to 32-bits so we don't lose in the typedef-less - network stack. */ - /* 64 to 33 */ - result = (result & 0xffffffff) + (result >> 32); - /* 33 to 32 */ - result = (result & 0xffffffff) + (result >> 32); - - pr_debug("%s saddr %x daddr %x len %x proto %x sum %x result %08Lx\n", - __func__, saddr, daddr, len, proto, sum, result); - - return (__wsum)result; -} -EXPORT_SYMBOL(csum_tcpudp_nofold); -- cgit v1.1 From 0c50f6f38399685d0c9ef0f5ffd6c4955e31cb26 Mon Sep 17 00:00:00 2001 From: Matt Fleming <matt@console-pimps.org> Date: Sat, 13 Jun 2009 22:23:27 +0100 Subject: sh: Make the atomic functions safe for irqsoff tracing The irqsoff tracer uses the atomic_* functions internally, but the implementations of those functions in arch/sh/include/asm/atomic-irq.h disable irqs to achieve atomicity. A continuous loop ensues where we disable interrupts, trace the interrupt disabling, call atomic_* functions, disable interrupts, trace the interrupt disabling, etc.. The simplest solution to all this is to just convert uses of local_irq_save()/local_irq_restore() the raw_* equivalents because the raw_* equivalents don't call trace_hardirqs_on()/trace_hardirqs_off(). Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/include/asm/atomic-irq.h | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/sh/include/asm/atomic-irq.h b/arch/sh/include/asm/atomic-irq.h index a0b3480..467d941 100644 --- a/arch/sh/include/asm/atomic-irq.h +++ b/arch/sh/include/asm/atomic-irq.h @@ -10,29 +10,29 @@ static inline void atomic_add(int i, atomic_t *v) { unsigned long flags; - local_irq_save(flags); + raw_local_irq_save(flags); v->counter += i; - local_irq_restore(flags); + raw_local_irq_restore(flags); } static inline void atomic_sub(int i, atomic_t *v) { unsigned long flags; - local_irq_save(flags); + raw_local_irq_save(flags); v->counter -= i; - local_irq_restore(flags); + raw_local_irq_restore(flags); } static inline int atomic_add_return(int i, atomic_t *v) { unsigned long temp, flags; - local_irq_save(flags); + raw_local_irq_save(flags); temp = v->counter; temp += i; v->counter = temp; - local_irq_restore(flags); + raw_local_irq_restore(flags); return temp; } @@ -41,11 +41,11 @@ static inline int atomic_sub_return(int i, atomic_t *v) { unsigned long temp, flags; - local_irq_save(flags); + raw_local_irq_save(flags); temp = v->counter; temp -= i; v->counter = temp; - local_irq_restore(flags); + raw_local_irq_restore(flags); return temp; } @@ -54,18 +54,18 @@ static inline void atomic_clear_mask(unsigned int mask, atomic_t *v) { unsigned long flags; - local_irq_save(flags); + raw_local_irq_save(flags); v->counter &= ~mask; - local_irq_restore(flags); + raw_local_irq_restore(flags); } static inline void atomic_set_mask(unsigned int mask, atomic_t *v) { unsigned long flags; - local_irq_save(flags); + raw_local_irq_save(flags); v->counter |= mask; - local_irq_restore(flags); + raw_local_irq_restore(flags); } #endif /* __ASM_SH_ATOMIC_IRQ_H */ -- cgit v1.1 From 507fa3a3d80365c595113a5ac3232309e3dbf5d8 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner <tglx@linutronix.de> Date: Sun, 14 Jun 2009 17:46:01 +0200 Subject: x86: hpet: Mark per cpu interrupts IRQF_TIMER to prevent resume failure timer interrupts are excluded from being disabled during suspend. The clock events code manages the disabling of clock events on its own because the timer interrupt needs to be functional before the resume code reenables the device interrupts. The hpet per cpu timers request their interrupt without setting the IRQF_TIMER flag so suspend_device_irqs() disables them as well which results in a fatal resume failure on the boot CPU. Adding IRQF_TIMER to the interupt flags when requesting the hpet per cpu timer interrupts solves the problem. Reported-by: Benjamin S. <sbenni@gmx.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Benjamin S. <sbenni@gmx.de> Cc: stable@kernel.org --- arch/x86/kernel/hpet.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c index 81408b9..dedc2bd 100644 --- a/arch/x86/kernel/hpet.c +++ b/arch/x86/kernel/hpet.c @@ -510,7 +510,8 @@ static int hpet_setup_irq(struct hpet_dev *dev) { if (request_irq(dev->irq, hpet_interrupt_handler, - IRQF_DISABLED|IRQF_NOBALANCING, dev->name, dev)) + IRQF_TIMER | IRQF_DISABLED | IRQF_NOBALANCING, + dev->name, dev)) return -1; disable_irq(dev->irq); -- cgit v1.1 From 5a6cec3abbdb74244caab68db100825a8c4ac02d Mon Sep 17 00:00:00 2001 From: Ingo Molnar <mingo@elte.hu> Date: Fri, 29 May 2009 11:25:09 +0200 Subject: perf_counter, x86: Fix call-chain walking Fix the ptregs variant when we hit user-mode tasks. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/kernel/cpu/perf_counter.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c index 77a59a5..09d8cb6 100644 --- a/arch/x86/kernel/cpu/perf_counter.c +++ b/arch/x86/kernel/cpu/perf_counter.c @@ -1644,7 +1644,9 @@ perf_callchain_user(struct pt_regs *regs, struct perf_callchain_entry *entry) const void __user *fp; int nr = entry->nr; - regs = (struct pt_regs *)current->thread.sp0 - 1; + if (!user_mode(regs)) + regs = task_pt_regs(current); + fp = (void __user *)regs->bp; callchain_store(entry, regs->ip); @@ -1656,7 +1658,7 @@ perf_callchain_user(struct pt_regs *regs, struct perf_callchain_entry *entry) if (!copy_stack_frame(fp, &frame)) break; - if ((unsigned long)fp < user_stack_pointer(regs)) + if ((unsigned long)fp < regs->sp) break; callchain_store(entry, frame.return_address); -- cgit v1.1 From 97f8a27a5cfb08c9ce3abc90aaafb791759aed94 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Date: Thu, 11 Jun 2009 22:51:12 -0400 Subject: [ARM] orion5x: increment window counter after adding sram mapping Without incrementing the counter the next window setup will overwrite the SRAM mapping. Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Signed-off-by: Nicolas Pitre <nico@marvell.com> --- arch/arm/mach-orion5x/addr-map.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c index 6f3f77d..d78731e 100644 --- a/arch/arm/mach-orion5x/addr-map.c +++ b/arch/arm/mach-orion5x/addr-map.c @@ -200,6 +200,6 @@ void __init orion5x_setup_pcie_wa_win(u32 base, u32 size) int __init orion5x_setup_sram_win(void) { - return setup_cpu_win(win_alloc_count, ORION5X_SRAM_PHYS_BASE, + return setup_cpu_win(win_alloc_count++, ORION5X_SRAM_PHYS_BASE, ORION5X_SRAM_SIZE, TARGET_SRAM, ATTR_SRAM, -1); } -- cgit v1.1 From 3fade49b734cca2d8c4f1bcd7c3023302b557f3b Mon Sep 17 00:00:00 2001 From: Nicolas Pitre <nico@cam.org> Date: Thu, 11 Jun 2009 22:27:20 +0200 Subject: [ARM] orion5x: register the crypto device on SOCs that support it Not all Orion variants do implement the crypto unit. Signed-off-by: Nicolas Pitre <nico@marvell.com> --- arch/arm/mach-orion5x/common.c | 10 +++++++++- arch/arm/mach-orion5x/common.h | 1 - 2 files changed, 9 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index eafcc49..f87fa12 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -562,7 +562,7 @@ static struct platform_device orion5x_crypto_device = { .resource = orion5x_crypto_res, }; -int __init orion5x_crypto_init(void) +static int __init orion5x_crypto_init(void) { int ret; @@ -697,6 +697,14 @@ void __init orion5x_init(void) } /* + * The 5082/5181l/5182/6082/6082l/6183 have crypto + * while 5180n/5181/5281 don't have crypto. + */ + if ((dev == MV88F5181_DEV_ID && rev >= MV88F5181L_REV_A0) || + dev == MV88F5182_DEV_ID || dev == MV88F6183_DEV_ID) + orion5x_crypto_init(); + + /* * Register watchdog driver */ orion5x_wdt_init(); diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h index de483e8..8f00450 100644 --- a/arch/arm/mach-orion5x/common.h +++ b/arch/arm/mach-orion5x/common.h @@ -38,7 +38,6 @@ void orion5x_spi_init(void); void orion5x_uart0_init(void); void orion5x_uart1_init(void); void orion5x_xor_init(void); -int orion5x_crypto_init(void); /* * PCIe/PCI functions. -- cgit v1.1 From 038e836e97e70c4ad2b5058b07fc7207f50b59dd Mon Sep 17 00:00:00 2001 From: Ingo Molnar <mingo@elte.hu> Date: Mon, 15 Jun 2009 09:57:59 +0200 Subject: perf_counter, x86: Fix kernel-space call-chains Kernel-space call-chains were trimmed at the first entry because we never processed anything beyond the first stack context. Allow the backtrace to jump from NMI to IRQ stack then to task stack and finally user-space stack. Also calculate the stack and bp variables correctly so that the stack walker does not exit early. We can get deep traces as a result, visible in perf report -D output: 0x32af0 [0xe0]: PERF_EVENT (IP, 5): 15134: 0xffffffff815225fd period: 1 ... chain: u:2, k:22, nr:24 ..... 0: 0xffffffff815225fd ..... 1: 0xffffffff810ac51c ..... 2: 0xffffffff81018e29 ..... 3: 0xffffffff81523939 ..... 4: 0xffffffff81524b8f ..... 5: 0xffffffff81524bd9 ..... 6: 0xffffffff8105e498 ..... 7: 0xffffffff8152315a ..... 8: 0xffffffff81522c3a ..... 9: 0xffffffff810d9b74 ..... 10: 0xffffffff810dbeec ..... 11: 0xffffffff810dc3fb This is a 22-entries kernel-space chain. (We still only record reliable stack entries.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/kernel/cpu/perf_counter.c | 22 +++++++++------------- 1 file changed, 9 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c index 09d8cb6..6d5e7cf 100644 --- a/arch/x86/kernel/cpu/perf_counter.c +++ b/arch/x86/kernel/cpu/perf_counter.c @@ -1575,8 +1575,8 @@ static void backtrace_warning(void *data, char *msg) static int backtrace_stack(void *data, char *name) { - /* Don't bother with IRQ stacks for now */ - return -1; + /* Process all stacks: */ + return 0; } static void backtrace_address(void *data, unsigned long addr, int reliable) @@ -1594,6 +1594,8 @@ static const struct stacktrace_ops backtrace_ops = { .address = backtrace_address, }; +#include "../dumpstack.h" + static void perf_callchain_kernel(struct pt_regs *regs, struct perf_callchain_entry *entry) { @@ -1601,26 +1603,20 @@ perf_callchain_kernel(struct pt_regs *regs, struct perf_callchain_entry *entry) char *stack; int nr = entry->nr; - callchain_store(entry, instruction_pointer(regs)); + callchain_store(entry, regs->ip); stack = ((char *)regs + sizeof(struct pt_regs)); #ifdef CONFIG_FRAME_POINTER - bp = frame_pointer(regs); + get_bp(bp); #else bp = 0; #endif - dump_trace(NULL, regs, (void *)stack, bp, &backtrace_ops, entry); + dump_trace(NULL, regs, (void *)&stack, bp, &backtrace_ops, entry); entry->kernel = entry->nr - nr; } - -struct stack_frame { - const void __user *next_fp; - unsigned long return_address; -}; - static int copy_stack_frame(const void __user *fp, struct stack_frame *frame) { int ret; @@ -1652,7 +1648,7 @@ perf_callchain_user(struct pt_regs *regs, struct perf_callchain_entry *entry) callchain_store(entry, regs->ip); while (entry->nr < MAX_STACK_DEPTH) { - frame.next_fp = NULL; + frame.next_frame = NULL; frame.return_address = 0; if (!copy_stack_frame(fp, &frame)) @@ -1662,7 +1658,7 @@ perf_callchain_user(struct pt_regs *regs, struct perf_callchain_entry *entry) break; callchain_store(entry, frame.return_address); - fp = frame.next_fp; + fp = frame.next_frame; } entry->user = entry->nr - nr; -- cgit v1.1 From 5d0e945a249c729caa69b3b0c6f19ba002c433b5 Mon Sep 17 00:00:00 2001 From: Paul Mundt <lethal@linux-sh.org> Date: Mon, 15 Jun 2009 19:02:37 +0900 Subject: sh: urquell: Add system FPGA mode pin support. Urquell has a system FPGA capable of reading the mode pin states from software, wire this up in the machvec. Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/boards/board-urquell.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/sh/boards/board-urquell.c b/arch/sh/boards/board-urquell.c index beb88c4..36b8bac 100644 --- a/arch/sh/boards/board-urquell.c +++ b/arch/sh/boards/board-urquell.c @@ -2,6 +2,7 @@ * Renesas Technology Corp. SH7786 Urquell Support. * * Copyright (C) 2008 Kuninori Morimoto <morimoto.kuninori@renesas.com> + * Copyright (C) 2009 Paul Mundt * * Based on board-sh7785lcr.c * Copyright (C) 2008 Yoshihiro Shimoda @@ -178,6 +179,11 @@ static void __init urquell_init_irq(void) plat_irq_setup_pins(IRQ_MODE_IRL3210_MASK); } +static int urquell_mode_pins(void) +{ + return __raw_readw(UBOARDREG(MDSWMR)); +} + /* Initialize the board */ static void __init urquell_setup(char **cmdline_p) { @@ -193,4 +199,5 @@ static struct sh_machine_vector mv_urquell __initmv = { .mv_name = "Urquell", .mv_setup = urquell_setup, .mv_init_irq = urquell_init_irq, + .mv_mode_pins = urquell_mode_pins, }; -- cgit v1.1 From 0975904276552c8e201dad0ad31152ba8a21505a Mon Sep 17 00:00:00 2001 From: Joerg Roedel <joerg.roedel@amd.com> Date: Tue, 9 Jun 2009 17:52:27 +0200 Subject: amd-iommu: disable IOMMU hardware on shutdown When the IOMMU stays enabled the BIOS may not be able to finish the machine shutdown properly. So disable the hardware on shutdown. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> --- arch/x86/include/asm/amd_iommu.h | 2 ++ arch/x86/kernel/amd_iommu_init.c | 5 +++++ arch/x86/kernel/pci-dma.c | 2 ++ 3 files changed, 9 insertions(+) (limited to 'arch') diff --git a/arch/x86/include/asm/amd_iommu.h b/arch/x86/include/asm/amd_iommu.h index 262e028..bdf96f1 100644 --- a/arch/x86/include/asm/amd_iommu.h +++ b/arch/x86/include/asm/amd_iommu.h @@ -29,9 +29,11 @@ extern void amd_iommu_detect(void); extern irqreturn_t amd_iommu_int_handler(int irq, void *data); extern void amd_iommu_flush_all_domains(void); extern void amd_iommu_flush_all_devices(void); +extern void amd_iommu_shutdown(void); #else static inline int amd_iommu_init(void) { return -ENODEV; } static inline void amd_iommu_detect(void) { } +static inline void amd_iommu_shutdown(void) { } #endif #endif /* _ASM_X86_AMD_IOMMU_H */ diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c index 238989e..575ca46 100644 --- a/arch/x86/kernel/amd_iommu_init.c +++ b/arch/x86/kernel/amd_iommu_init.c @@ -1273,6 +1273,11 @@ free: goto out; } +void amd_iommu_shutdown(void) +{ + disable_iommus(); +} + /**************************************************************************** * * Early detect code. This code runs at IOMMU detection time in the DMA diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c index 745579b..328592f 100644 --- a/arch/x86/kernel/pci-dma.c +++ b/arch/x86/kernel/pci-dma.c @@ -290,6 +290,8 @@ static int __init pci_iommu_init(void) void pci_iommu_shutdown(void) { gart_iommu_shutdown(); + + amd_iommu_shutdown(); } /* Must execute after PCI subsystem */ fs_initcall(pci_iommu_init); -- cgit v1.1 From 61d047be99757fd9b0af900d7abce9a13a337488 Mon Sep 17 00:00:00 2001 From: Joerg Roedel <joerg.roedel@amd.com> Date: Tue, 9 Jun 2009 17:56:09 +0200 Subject: x86: disable IOMMUs on kernel crash If the IOMMUs are still enabled when the kexec kernel boots access to the disk is not possible. This is bad for tools like kdump or anything else which wants to use PCI devices. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> --- arch/x86/kernel/crash.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/crash.c b/arch/x86/kernel/crash.c index ff95824..5e409dc 100644 --- a/arch/x86/kernel/crash.c +++ b/arch/x86/kernel/crash.c @@ -27,6 +27,7 @@ #include <asm/cpu.h> #include <asm/reboot.h> #include <asm/virtext.h> +#include <asm/iommu.h> #if defined(CONFIG_SMP) && defined(CONFIG_X86_LOCAL_APIC) @@ -103,5 +104,10 @@ void native_machine_crash_shutdown(struct pt_regs *regs) #ifdef CONFIG_HPET_TIMER hpet_disable(); #endif + +#ifdef CONFIG_X86_64 + pci_iommu_shutdown(); +#endif + crash_save_cpu(regs, safe_smp_processor_id()); } -- cgit v1.1 From 42a49f965a8d24ed92af04f5b564d63f17fd9c56 Mon Sep 17 00:00:00 2001 From: Chris Wright <chrisw@sous-sol.org> Date: Mon, 15 Jun 2009 15:42:00 +0200 Subject: amd-iommu: flush domain tlb when attaching a new device When kexec'ing to a new kernel (for example, when crashing and launching a kdump session), the AMD IOMMU may have cached translations. The kexec'd kernel, during initialization, will invalidate the IOMMU device table entries, but not the domain translations. These stale entries can cause a device's DMA to fail, makes it rough to write a dump to disk when the disk controller can't DMA ;-) Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> --- arch/x86/kernel/amd_iommu.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c index 1c60554..9372f04 100644 --- a/arch/x86/kernel/amd_iommu.c +++ b/arch/x86/kernel/amd_iommu.c @@ -434,6 +434,16 @@ static void iommu_flush_tlb(struct amd_iommu *iommu, u16 domid) iommu_queue_inv_iommu_pages(iommu, address, domid, 0, 1); } +/* Flush the whole IO/TLB for a given protection domain - including PDE */ +static void iommu_flush_tlb_pde(struct amd_iommu *iommu, u16 domid) +{ + u64 address = CMD_INV_IOMMU_ALL_PAGES_ADDRESS; + + INC_STATS_COUNTER(domain_flush_single); + + iommu_queue_inv_iommu_pages(iommu, address, domid, 1, 1); +} + /* * This function is used to flush the IO/TLB for a given protection domain * on every IOMMU in the system @@ -1078,7 +1088,13 @@ static void attach_device(struct amd_iommu *iommu, amd_iommu_pd_table[devid] = domain; write_unlock_irqrestore(&amd_iommu_devtable_lock, flags); + /* + * We might boot into a crash-kernel here. The crashed kernel + * left the caches in the IOMMU dirty. So we have to flush + * here to evict all dirty stuff. + */ iommu_queue_inv_dev_entry(iommu, devid); + iommu_flush_tlb_pde(iommu, domain->id); } /* -- cgit v1.1 From a8c485bb6857811807d42f9fd1fde2f5f89cc5c9 Mon Sep 17 00:00:00 2001 From: Chris Wright <chrisw@sous-sol.org> Date: Mon, 15 Jun 2009 15:53:45 +0200 Subject: amd-iommu: disable cmd buffer and evt logging before reprogramming iommu The IOMMU spec states that IOMMU behavior may be undefined when the IOMMU registers are rewritten while command or event buffer is enabled. Disable them in IOMMU disable path. Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> --- arch/x86/kernel/amd_iommu_init.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c index 575ca46..48a79b9 100644 --- a/arch/x86/kernel/amd_iommu_init.c +++ b/arch/x86/kernel/amd_iommu_init.c @@ -260,6 +260,14 @@ static void iommu_enable(struct amd_iommu *iommu) static void iommu_disable(struct amd_iommu *iommu) { + /* Disable command buffer */ + iommu_feature_disable(iommu, CONTROL_CMDBUF_EN); + + /* Disable event logging and event interrupts */ + iommu_feature_disable(iommu, CONTROL_EVT_INT_EN); + iommu_feature_disable(iommu, CONTROL_EVT_LOG_EN); + + /* Disable IOMMU hardware itself */ iommu_feature_disable(iommu, CONTROL_IOMMU_EN); } @@ -1042,6 +1050,7 @@ static void enable_iommus(void) struct amd_iommu *iommu; for_each_iommu(iommu) { + iommu_disable(iommu); iommu_set_device_table(iommu); iommu_enable_command_buffer(iommu); iommu_enable_event_buffer(iommu); -- cgit v1.1 From 465a454f254ee2ff7acc4aececbe31f8af046bc0 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra <a.p.zijlstra@chello.nl> Date: Mon, 15 Jun 2009 12:31:37 +0200 Subject: x86, mm: Add __get_user_pages_fast() Introduce a gup_fast() variant which is usable from IRQ/NMI context. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> CC: Nick Piggin <npiggin@suse.de> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/mm/gup.c | 56 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 56 insertions(+) (limited to 'arch') diff --git a/arch/x86/mm/gup.c b/arch/x86/mm/gup.c index 6340cef..697d572 100644 --- a/arch/x86/mm/gup.c +++ b/arch/x86/mm/gup.c @@ -219,6 +219,62 @@ static int gup_pud_range(pgd_t pgd, unsigned long addr, unsigned long end, return 1; } +/* + * Like get_user_pages_fast() except its IRQ-safe in that it won't fall + * back to the regular GUP. + */ +int __get_user_pages_fast(unsigned long start, int nr_pages, int write, + struct page **pages) +{ + struct mm_struct *mm = current->mm; + unsigned long addr, len, end; + unsigned long next; + unsigned long flags; + pgd_t *pgdp; + int nr = 0; + + start &= PAGE_MASK; + addr = start; + len = (unsigned long) nr_pages << PAGE_SHIFT; + end = start + len; + if (unlikely(!access_ok(write ? VERIFY_WRITE : VERIFY_READ, + (void __user *)start, len))) + return 0; + + /* + * XXX: batch / limit 'nr', to avoid large irq off latency + * needs some instrumenting to determine the common sizes used by + * important workloads (eg. DB2), and whether limiting the batch size + * will decrease performance. + * + * It seems like we're in the clear for the moment. Direct-IO is + * the main guy that batches up lots of get_user_pages, and even + * they are limited to 64-at-a-time which is not so many. + */ + /* + * This doesn't prevent pagetable teardown, but does prevent + * the pagetables and pages from being freed on x86. + * + * So long as we atomically load page table pointers versus teardown + * (which we do on x86, with the above PAE exception), we can follow the + * address down to the the page and take a ref on it. + */ + local_irq_save(flags); + pgdp = pgd_offset(mm, addr); + do { + pgd_t pgd = *pgdp; + + next = pgd_addr_end(addr, end); + if (pgd_none(pgd)) + break; + if (!gup_pud_range(pgd, addr, next, write, pages, &nr)) + break; + } while (pgdp++, addr = next, addr != end); + local_irq_restore(flags); + + return nr; +} + /** * get_user_pages_fast() - pin user pages in memory * @start: starting user address -- cgit v1.1 From 3ff0141aa3a03ca3388b40b36167d0a37919f3fd Mon Sep 17 00:00:00 2001 From: Peter Zijlstra <a.p.zijlstra@chello.nl> Date: Mon, 15 Jun 2009 12:40:41 +0200 Subject: x86: Add NMI types for kmap_atomic Two new kmap_atomic slots for NMI context. And teach pte_offset_map() about NMI context. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> CC: Nick Piggin <npiggin@suse.de> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/include/asm/kmap_types.h | 4 +++- arch/x86/include/asm/pgtable_32.h | 5 +++-- 2 files changed, 6 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/kmap_types.h b/arch/x86/include/asm/kmap_types.h index 5759c16..ff00a44 100644 --- a/arch/x86/include/asm/kmap_types.h +++ b/arch/x86/include/asm/kmap_types.h @@ -21,7 +21,9 @@ D(9) KM_IRQ0, D(10) KM_IRQ1, D(11) KM_SOFTIRQ0, D(12) KM_SOFTIRQ1, -D(13) KM_TYPE_NR +D(13) KM_NMI, +D(14) KM_NMI_PTE, +D(15) KM_TYPE_NR }; #undef D diff --git a/arch/x86/include/asm/pgtable_32.h b/arch/x86/include/asm/pgtable_32.h index 31bd120..8546497 100644 --- a/arch/x86/include/asm/pgtable_32.h +++ b/arch/x86/include/asm/pgtable_32.h @@ -49,13 +49,14 @@ extern void set_pmd_pfn(unsigned long, unsigned long, pgprot_t); #endif #if defined(CONFIG_HIGHPTE) +#define __KM_PTE (in_nmi() ? KM_NMI_PTE : KM_PTE0) #define pte_offset_map(dir, address) \ - ((pte_t *)kmap_atomic_pte(pmd_page(*(dir)), KM_PTE0) + \ + ((pte_t *)kmap_atomic_pte(pmd_page(*(dir)), __KM_PTE) + \ pte_index((address))) #define pte_offset_map_nested(dir, address) \ ((pte_t *)kmap_atomic_pte(pmd_page(*(dir)), KM_PTE1) + \ pte_index((address))) -#define pte_unmap(pte) kunmap_atomic((pte), KM_PTE0) +#define pte_unmap(pte) kunmap_atomic((pte), __KM_PTE) #define pte_unmap_nested(pte) kunmap_atomic((pte), KM_PTE1) #else #define pte_offset_map(dir, address) \ -- cgit v1.1 From 74193ef0ecab92535c8517f082f1f50504526c9b Mon Sep 17 00:00:00 2001 From: Peter Zijlstra <a.p.zijlstra@chello.nl> Date: Mon, 15 Jun 2009 13:07:24 +0200 Subject: perf_counter: x86: Fix call-chain support to use NMI-safe methods __copy_from_user_inatomic() isn't NMI safe in that it can trigger the page fault handler which is another trap and its return path invokes IRET which will also close the NMI context. Therefore use a GUP based approach to copy the stack frames over. We tried an alternative solution as well: we used a forward ported version of Mathieu Desnoyers's "NMI safe INT3 and Page Fault" patch that modifies the exception return path to use an open-coded IRET with explicit stack unrolling and TF checking. This didnt work as it interacted with faulting user-space instructions, causing them not to restart properly, which corrupts user-space registers. Solving that would probably involve disassembling those instructions and backtracing the RIP. But even without that, the code was deemed rather complex to the already non-trivial x86 entry assembly code, so instead we went for this GUP based method that does a software-walk of the pagetables. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Nick Piggin <npiggin@suse.de> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Vegard Nossum <vegard.nossum@gmail.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/kernel/cpu/perf_counter.c | 49 ++++++++++++++++++++++++++++++-------- 1 file changed, 39 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c index 6d5e7cf..e8c68a5 100644 --- a/arch/x86/kernel/cpu/perf_counter.c +++ b/arch/x86/kernel/cpu/perf_counter.c @@ -19,6 +19,7 @@ #include <linux/kdebug.h> #include <linux/sched.h> #include <linux/uaccess.h> +#include <linux/highmem.h> #include <asm/apic.h> #include <asm/stacktrace.h> @@ -1617,20 +1618,48 @@ perf_callchain_kernel(struct pt_regs *regs, struct perf_callchain_entry *entry) entry->kernel = entry->nr - nr; } -static int copy_stack_frame(const void __user *fp, struct stack_frame *frame) +/* + * best effort, GUP based copy_from_user() that assumes IRQ or NMI context + */ +static unsigned long +copy_from_user_nmi(void *to, const void __user *from, unsigned long n) { + unsigned long offset, addr = (unsigned long)from; + int type = in_nmi() ? KM_NMI : KM_IRQ0; + unsigned long size, len = 0; + struct page *page; + void *map; int ret; - if (!access_ok(VERIFY_READ, fp, sizeof(*frame))) - return 0; + do { + ret = __get_user_pages_fast(addr, 1, 0, &page); + if (!ret) + break; - ret = 1; - pagefault_disable(); - if (__copy_from_user_inatomic(frame, fp, sizeof(*frame))) - ret = 0; - pagefault_enable(); + offset = addr & (PAGE_SIZE - 1); + size = min(PAGE_SIZE - offset, n - len); - return ret; + map = kmap_atomic(page, type); + memcpy(to, map+offset, size); + kunmap_atomic(map, type); + put_page(page); + + len += size; + to += size; + addr += size; + + } while (len < n); + + return len; +} + +static int copy_stack_frame(const void __user *fp, struct stack_frame *frame) +{ + unsigned long bytes; + + bytes = copy_from_user_nmi(frame, fp, sizeof(*frame)); + + return bytes == sizeof(*frame); } static void @@ -1643,7 +1672,7 @@ perf_callchain_user(struct pt_regs *regs, struct perf_callchain_entry *entry) if (!user_mode(regs)) regs = task_pt_regs(current); - fp = (void __user *)regs->bp; + fp = (void __user *)regs->bp; callchain_store(entry, regs->ip); -- cgit v1.1 From 09067207f6eacb7f00c8f7f0623c3696083ce042 Mon Sep 17 00:00:00 2001 From: Joerg Roedel <joerg.roedel@amd.com> Date: Mon, 15 Jun 2009 16:06:48 +0200 Subject: amd-iommu: set event buffer head and tail to 0 manually These registers may contain values from previous kernels. So reset them to known values before enable the event buffer again. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> --- arch/x86/kernel/amd_iommu_init.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c index 48a79b9..068a356 100644 --- a/arch/x86/kernel/amd_iommu_init.c +++ b/arch/x86/kernel/amd_iommu_init.c @@ -486,6 +486,10 @@ static void iommu_enable_event_buffer(struct amd_iommu *iommu) memcpy_toio(iommu->mmio_base + MMIO_EVT_BUF_OFFSET, &entry, sizeof(entry)); + /* set head and tail to zero manually */ + writel(0x00, iommu->mmio_base + MMIO_EVT_HEAD_OFFSET); + writel(0x00, iommu->mmio_base + MMIO_EVT_TAIL_OFFSET); + iommu_feature_enable(iommu, CONTROL_EVT_LOG_EN); } -- cgit v1.1 From 90c8f954534ba15e4542ab00dd9f0e58b071518c Mon Sep 17 00:00:00 2001 From: Paul Mackerras <paulus@samba.org> Date: Mon, 15 Jun 2009 21:36:52 +1000 Subject: perf_counter: powerpc: Fix two compile warnings This fixes a couple of compile warnings that crept into the powerpc perf_counter code recently: CC arch/powerpc/kernel/perf_counter.o arch/powerpc/kernel/perf_counter.c: In function 'record_and_restart': arch/powerpc/kernel/perf_counter.c:1016: warning: unused variable 'addr' arch/powerpc/kernel/perf_counter.c: In function 'hw_perf_counter_init': arch/powerpc/kernel/perf_counter.c:891: warning: 'ev' may be used uninitialized in this function Stephen Rothwell reported this against linux-next as well. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <18998.12884.787039.22202@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/powerpc/kernel/perf_counter.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/perf_counter.c b/arch/powerpc/kernel/perf_counter.c index bb20238..e6dc185 100644 --- a/arch/powerpc/kernel/perf_counter.c +++ b/arch/powerpc/kernel/perf_counter.c @@ -913,6 +913,8 @@ const struct pmu *hw_perf_counter_init(struct perf_counter *counter) case PERF_TYPE_RAW: ev = counter->attr.config; break; + default: + return ERR_PTR(-EINVAL); } counter->hw.config_base = ev; counter->hw.idx = 0; @@ -1013,7 +1015,7 @@ static void record_and_restart(struct perf_counter *counter, long val, u64 period = counter->hw.sample_period; s64 prev, delta, left; int record = 0; - u64 addr, mmcra, sdsync; + u64 mmcra, sdsync; /* we don't have to worry about interrupts here */ prev = atomic64_read(&counter->hw.prev_count); -- cgit v1.1 From 9974458e2f9a11dbd2f4bd14fab5a79af4907b41 Mon Sep 17 00:00:00 2001 From: Paul Mackerras <paulus@samba.org> Date: Mon, 15 Jun 2009 21:45:16 +1000 Subject: perf_counter: Make set_perf_counter_pending() declaration common At present, every architecture that supports perf_counters has to declare set_perf_counter_pending() in its arch-specific headers. This consolidates the declarations into a single declaration in one common place, include/linux/perf_counter.h. On powerpc, we continue to provide a static inline definition of set_perf_counter_pending() in the powerpc hw_irq.h. Also, this removes from the x86 perf_counter.h the unused null definitions of {test,clear}_perf_counter_pending. Reported-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: benh@kernel.crashing.org LKML-Reference: <18998.13388.920691.523227@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/powerpc/include/asm/hw_irq.h | 1 - arch/powerpc/include/asm/perf_counter.h | 2 ++ arch/x86/include/asm/perf_counter.h | 5 ----- 3 files changed, 2 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h index 5351237..1974cf1 100644 --- a/arch/powerpc/include/asm/hw_irq.h +++ b/arch/powerpc/include/asm/hw_irq.h @@ -163,7 +163,6 @@ static inline unsigned long test_perf_counter_pending(void) return 0; } -static inline void set_perf_counter_pending(void) {} static inline void clear_perf_counter_pending(void) {} #endif /* CONFIG_PERF_COUNTERS */ diff --git a/arch/powerpc/include/asm/perf_counter.h b/arch/powerpc/include/asm/perf_counter.h index cc7c887..b398a84 100644 --- a/arch/powerpc/include/asm/perf_counter.h +++ b/arch/powerpc/include/asm/perf_counter.h @@ -10,6 +10,8 @@ */ #include <linux/types.h> +#include <asm/hw_irq.h> + #define MAX_HWCOUNTERS 8 #define MAX_EVENT_ALTERNATIVES 8 #define MAX_LIMITED_HWCOUNTERS 2 diff --git a/arch/x86/include/asm/perf_counter.h b/arch/x86/include/asm/perf_counter.h index 876ed97..5fb33e1 100644 --- a/arch/x86/include/asm/perf_counter.h +++ b/arch/x86/include/asm/perf_counter.h @@ -84,11 +84,6 @@ union cpuid10_edx { #define MSR_ARCH_PERFMON_FIXED_CTR2 0x30b #define X86_PMC_IDX_FIXED_BUS_CYCLES (X86_PMC_IDX_FIXED + 2) -extern void set_perf_counter_pending(void); - -#define clear_perf_counter_pending() do { } while (0) -#define test_perf_counter_pending() (0) - #ifdef CONFIG_PERF_COUNTERS extern void init_hw_perf_counters(void); extern void perf_counters_lapic_init(void); -- cgit v1.1 From 0990b1c65729012a63e0eeca93aaaafea4e9a064 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra <a.p.zijlstra@chello.nl> Date: Mon, 15 Jun 2009 16:46:05 +0200 Subject: x86: Add NMI types for kmap_atomic, fix I just realized this has a kmap_atomic bug in... The below would fix it - but it's complicating this code some more. Alternatively I would have to introduce something like pte_offset_map_irq() which would make the irq/nmi detection and leave the regular code paths alone, however that would mean either duplicating the gup_fast() pagewalk or passing down a pte function pointer, which would only duplicate the gup_pte_range() bit, neither is really attractive ... Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> CC: Nick Piggin <npiggin@suse.de> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/include/asm/kmap_types.h | 11 ++++++----- arch/x86/include/asm/pgtable_32.h | 5 ++++- 2 files changed, 10 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/kmap_types.h b/arch/x86/include/asm/kmap_types.h index ff00a44..f866138 100644 --- a/arch/x86/include/asm/kmap_types.h +++ b/arch/x86/include/asm/kmap_types.h @@ -19,11 +19,12 @@ D(7) KM_PTE0, D(8) KM_PTE1, D(9) KM_IRQ0, D(10) KM_IRQ1, -D(11) KM_SOFTIRQ0, -D(12) KM_SOFTIRQ1, -D(13) KM_NMI, -D(14) KM_NMI_PTE, -D(15) KM_TYPE_NR +D(11) KM_IRQ_PTE, +D(12) KM_SOFTIRQ0, +D(13) KM_SOFTIRQ1, +D(14) KM_NMI, +D(15) KM_NMI_PTE, +D(16) KM_TYPE_NR }; #undef D diff --git a/arch/x86/include/asm/pgtable_32.h b/arch/x86/include/asm/pgtable_32.h index 8546497..01fd946 100644 --- a/arch/x86/include/asm/pgtable_32.h +++ b/arch/x86/include/asm/pgtable_32.h @@ -49,7 +49,10 @@ extern void set_pmd_pfn(unsigned long, unsigned long, pgprot_t); #endif #if defined(CONFIG_HIGHPTE) -#define __KM_PTE (in_nmi() ? KM_NMI_PTE : KM_PTE0) +#define __KM_PTE \ + (in_nmi() ? KM_NMI_PTE : \ + in_irq() ? KM_IRQ_PTE : \ + KM_PTE0) #define pte_offset_map(dir, address) \ ((pte_t *)kmap_atomic_pte(pmd_page(*(dir)), __KM_PTE) + \ pte_index((address))) -- cgit v1.1 From 86e13684aa77f07c77db352f437d9e53a84dde90 Mon Sep 17 00:00:00 2001 From: Thomas Renninger <trenn@suse.de> Date: Wed, 22 Apr 2009 13:48:30 +0200 Subject: [CPUFREQ] powernow-k8: Set transition latency to 1 if ACPI tables export 0 This doesn't fix anything, but it's expected that a transition latency of 0 could cause trouble in the future. Signed-off-by: Thomas Renninger <trenn@suse.de> Cc: Langsdorf, Mark <mark.langsdorf@amd.com> Signed-off-by: Dave Jones <davej@redhat.com> --- arch/x86/kernel/cpu/cpufreq/powernow-k8.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c index cf52215..9359896 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c @@ -1046,6 +1046,19 @@ static int get_transition_latency(struct powernow_k8_data *data) if (cur_latency > max_latency) max_latency = cur_latency; } + if (max_latency == 0) { + /* + * Fam 11h always returns 0 as transition latency. + * This is intended and means "very fast". While cpufreq core + * and governors currently can handle that gracefully, better + * set it to 1 to avoid problems in the future. + * For all others it's a BIOS bug. + */ + if (!boot_cpu_data.x86 == 0x11) + printk(KERN_ERR FW_WARN PFX "Invalid zero transition " + "latency\n"); + max_latency = 1; + } /* value in usecs, needs to be in nanoseconds */ return 1000 * max_latency; } -- cgit v1.1 From 21335d021464c3ba3c20fc7207ffe2bdd2458568 Mon Sep 17 00:00:00 2001 From: Luis Henriques <henrix@sapo.pt> Date: Thu, 23 Apr 2009 19:45:04 +0100 Subject: [CPUFREQ] powernow-k8.c: mess cleanup Mess cleanup in powernow_k8_acpi_pst_values() function. Signed-off-by: Luis Henriques <henrix@sapo.pt> Signed-off-by: Dave Jones <davej@redhat.com> --- arch/x86/kernel/cpu/cpufreq/powernow-k8.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c index 9359896..a9d7ecb 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c @@ -1,3 +1,4 @@ + /* * (c) 2003-2006 Advanced Micro Devices, Inc. * Your use of this code is subject to the terms and conditions of the @@ -823,13 +824,14 @@ static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, if (!data->acpi_data.state_count || (cpu_family == CPU_HW_PSTATE)) return; - control = data->acpi_data.states[index].control; data->irt = (control - >> IRT_SHIFT) & IRT_MASK; data->rvo = (control >> - RVO_SHIFT) & RVO_MASK; data->exttype = (control - >> EXT_TYPE_SHIFT) & EXT_TYPE_MASK; - data->plllock = (control >> PLL_L_SHIFT) & PLL_L_MASK; data->vidmvs = 1 - << ((control >> MVS_SHIFT) & MVS_MASK); data->vstable = - (control >> VST_SHIFT) & VST_MASK; } + control = data->acpi_data.states[index].control; + data->irt = (control >> IRT_SHIFT) & IRT_MASK; + data->rvo = (control >> RVO_SHIFT) & RVO_MASK; + data->exttype = (control >> EXT_TYPE_SHIFT) & EXT_TYPE_MASK; + data->plllock = (control >> PLL_L_SHIFT) & PLL_L_MASK; + data->vidmvs = 1 << ((control >> MVS_SHIFT) & MVS_MASK); + data->vstable = (control >> VST_SHIFT) & VST_MASK; +} static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) { -- cgit v1.1 From 931db6a32dbfaad627e89d0524979ce9cb894691 Mon Sep 17 00:00:00 2001 From: Dave Jones <davej@redhat.com> Date: Mon, 1 Jun 2009 12:29:55 -0400 Subject: [CPUFREQ] Clean up convoluted code in arch/x86/kernel/tsc.c:time_cpufreq_notifier() Christoph Hellwig noticed the following potential uninitialised use: > arch/x86/kernel/tsc.c: In function 'time_cpufreq_notifier': > arch/x86/kernel/tsc.c:634: warning: 'dummy' may be used uninitialized in this function > > where we do have CONFIG_SMP set, freq->flags & CPUFREQ_CONST_LOOPS is > true and ref_freq is false. It seems plausable, though the circumstances for hitting it are really low. Nearly all SMP capable cpufreq drivers set CPUFREQ_CONST_LOOPS. powernow-k8 is really the only exception. The older CPUs were typically only ever UP. (powernow-k7 never supported SMP for eg) It's worth fixing regardless, as it cleans up the code. Fix possible uninitialized use of dummy, by just removing it, and making the setting of lpj more obvious. Signed-off-by: Dave Jones <davej@redhat.com> --- arch/x86/kernel/tsc.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c index 3e1c057..3fbd320 100644 --- a/arch/x86/kernel/tsc.c +++ b/arch/x86/kernel/tsc.c @@ -631,17 +631,15 @@ static int time_cpufreq_notifier(struct notifier_block *nb, unsigned long val, void *data) { struct cpufreq_freqs *freq = data; - unsigned long *lpj, dummy; + unsigned long *lpj; if (cpu_has(&cpu_data(freq->cpu), X86_FEATURE_CONSTANT_TSC)) return 0; - lpj = &dummy; - if (!(freq->flags & CPUFREQ_CONST_LOOPS)) + lpj = &boot_cpu_data.loops_per_jiffy; #ifdef CONFIG_SMP + if (!(freq->flags & CPUFREQ_CONST_LOOPS)) lpj = &cpu_data(freq->cpu).loops_per_jiffy; -#else - lpj = &boot_cpu_data.loops_per_jiffy; #endif if (!ref_freq) { -- cgit v1.1 From b394f1dfc070e6f50f5f33694000815e50ef319d Mon Sep 17 00:00:00 2001 From: Andrew Morton <akpm@linux-foundation.org> Date: Wed, 10 Jun 2009 12:41:37 -0700 Subject: [CPUFREQ] reduce scope of ACPI_PSS_BIOS_BUG_MSG[] This symbol doesn't need file-global scope. Cc: "Zhang, Rui" <rui.zhang@intel.com> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: Ingo Molnar <mingo@elte.hu> Cc: Langsdorf, Mark <mark.langsdorf@amd.com> Cc: Leo Milano <lmilano@gmx.net> Cc: Thomas Renninger <trenn@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Jones <davej@redhat.com> --- arch/x86/kernel/cpu/cpufreq/powernow-k8.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c index a9d7ecb..2709b3c 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c @@ -1250,13 +1250,12 @@ static int powernowk8_verify(struct cpufreq_policy *pol) return cpufreq_frequency_table_verify(pol, data->powernow_table); } -static const char ACPI_PSS_BIOS_BUG_MSG[] = - KERN_ERR FW_BUG PFX "No compatible ACPI _PSS objects found.\n" - KERN_ERR FW_BUG PFX "Try again with latest BIOS.\n"; - /* per CPU init entry point to the driver */ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) { + static const char ACPI_PSS_BIOS_BUG_MSG[] = + KERN_ERR FW_BUG PFX "No compatible ACPI _PSS objects found.\n" + KERN_ERR FW_BUG PFX "Try again with latest BIOS.\n"; struct powernow_k8_data *data; cpumask_t oldmask; int rc; -- cgit v1.1 From 532cfee6ba0a8efcf7c3ce38b9881292d79d516e Mon Sep 17 00:00:00 2001 From: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Date: Thu, 11 Jun 2009 15:26:48 +0000 Subject: [CPUFREQ] powernow-k8: read P-state from HW By definition, "cpuinfo_cur_freq" should report the value from HW. So, don't depend on the cached value. Instead read P-state directly from HW, while taking into account the erratum 311 workaround for Fam 11h processors. Cc: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Langsdorf, Mark <mark.langsdorf@amd.com> Cc: Thomas Renninger <trenn@suse.de> Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Reviewed-by: Andreas Herrmann <andreas.herrmann3@amd.com> Tested-by: Andreas Herrmann <andreas.herrmann3@amd.com> Acked-by: Langsdorf, Mark <mark.langsdorf@amd.com> Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Dave Jones <davej@redhat.com> --- arch/x86/kernel/cpu/cpufreq/powernow-k8.c | 25 +++++++++++-------------- 1 file changed, 11 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c index 2709b3c..3310211 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c @@ -118,20 +118,17 @@ static int query_current_values_with_pending_wait(struct powernow_k8_data *data) u32 i = 0; if (cpu_family == CPU_HW_PSTATE) { - if (data->currpstate == HW_PSTATE_INVALID) { - /* read (initial) hw pstate if not yet set */ - rdmsr(MSR_PSTATE_STATUS, lo, hi); - i = lo & HW_PSTATE_MASK; - - /* - * a workaround for family 11h erratum 311 might cause - * an "out-of-range Pstate if the core is in Pstate-0 - */ - if (i >= data->numps) - data->currpstate = HW_PSTATE_0; - else - data->currpstate = i; - } + rdmsr(MSR_PSTATE_STATUS, lo, hi); + i = lo & HW_PSTATE_MASK; + data->currpstate = i; + + /* + * a workaround for family 11h erratum 311 might cause + * an "out-of-range Pstate if the core is in Pstate-0 + */ + if ((boot_cpu_data.x86 == 0x11) && (i >= data->numps)) + data->currpstate = HW_PSTATE_0; + return 0; } do { -- cgit v1.1 From e15bc4559b397a611441a135b1f5992f07d0f436 Mon Sep 17 00:00:00 2001 From: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Date: Thu, 11 Jun 2009 15:26:54 +0000 Subject: [CPUFREQ] powernow-k8: get drv data for correct CPU Make powernowk8_get() similar to powernowk8_target() and powernowk8_verify() in the way it obtains "powernow_data" for a given CPU. Cc: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Langsdorf, Mark <mark.langsdorf@amd.com> Cc: Thomas Renninger <trenn@suse.de> Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Reviewed-by: Andreas Herrmann <andreas.herrmann3@amd.com> Tested-by: Andreas Herrmann <andreas.herrmann3@amd.com> Acked-by: Langsdorf, Mark <mark.langsdorf@amd.com> Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Dave Jones <davej@redhat.com> --- arch/x86/kernel/cpu/cpufreq/powernow-k8.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c index 3310211..20c7b99 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c @@ -1385,13 +1385,9 @@ static int __devexit powernowk8_cpu_exit(struct cpufreq_policy *pol) static unsigned int powernowk8_get(unsigned int cpu) { - struct powernow_k8_data *data; + struct powernow_k8_data *data = per_cpu(powernow_data, cpu); cpumask_t oldmask = current->cpus_allowed; unsigned int khz = 0; - unsigned int first; - - first = cpumask_first(cpu_core_mask(cpu)); - data = per_cpu(powernow_data, first); if (!data) return -EINVAL; -- cgit v1.1 From 394122ab144dae4b276d74644a2f11c44a60ac5c Mon Sep 17 00:00:00 2001 From: Rusty Russell <rusty@rustcorp.com.au> Date: Thu, 11 Jun 2009 22:59:58 +0930 Subject: [CPUFREQ] cpumask: avoid playing with cpus_allowed in speedstep-ich.c Impact: don't play with current's cpumask It's generally a very bad idea to mug some process's cpumask: it could legitimately and reasonably be changed by root, which could break us (if done before our code) or them (if we restore the wrong value). We use smp_call_function_single: this had the advantage of being more efficient, too. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> To: cpufreq@vger.kernel.org Cc: Dominik Brodowski <linux@brodo.de> Signed-off-by: Dave Jones <davej@redhat.com> --- arch/x86/kernel/cpu/cpufreq/speedstep-ich.c | 93 +++++++++++++++++------------ arch/x86/kernel/cpu/cpufreq/speedstep-lib.c | 1 + 2 files changed, 55 insertions(+), 39 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c b/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c index 016c1a4..6911e91 100644 --- a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c +++ b/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c @@ -89,7 +89,8 @@ static int speedstep_find_register(void) * speedstep_set_state - set the SpeedStep state * @state: new processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH) * - * Tries to change the SpeedStep state. + * Tries to change the SpeedStep state. Can be called from + * smp_call_function_single. */ static void speedstep_set_state(unsigned int state) { @@ -143,6 +144,11 @@ static void speedstep_set_state(unsigned int state) return; } +/* Wrapper for smp_call_function_single. */ +static void _speedstep_set_state(void *_state) +{ + speedstep_set_state(*(unsigned int *)_state); +} /** * speedstep_activate - activate SpeedStep control in the chipset @@ -226,22 +232,28 @@ static unsigned int speedstep_detect_chipset(void) return 0; } -static unsigned int _speedstep_get(const struct cpumask *cpus) -{ +struct get_freq_data { unsigned int speed; - cpumask_t cpus_allowed; - - cpus_allowed = current->cpus_allowed; - set_cpus_allowed_ptr(current, cpus); - speed = speedstep_get_frequency(speedstep_processor); - set_cpus_allowed_ptr(current, &cpus_allowed); - dprintk("detected %u kHz as current frequency\n", speed); - return speed; + unsigned int processor; +}; + +static void get_freq_data(void *_data) +{ + struct get_freq_data *data = _data; + + data->speed = speedstep_get_frequency(data->processor); } static unsigned int speedstep_get(unsigned int cpu) { - return _speedstep_get(cpumask_of(cpu)); + struct get_freq_data data = { .processor = cpu }; + + /* You're supposed to ensure CPU is online. */ + if (smp_call_function_single(cpu, get_freq_data, &data, 1) != 0) + BUG(); + + dprintk("detected %u kHz as current frequency\n", data.speed); + return data.speed; } /** @@ -257,16 +269,16 @@ static int speedstep_target(struct cpufreq_policy *policy, unsigned int target_freq, unsigned int relation) { - unsigned int newstate = 0; + unsigned int newstate = 0, policy_cpu; struct cpufreq_freqs freqs; - cpumask_t cpus_allowed; int i; if (cpufreq_frequency_table_target(policy, &speedstep_freqs[0], target_freq, relation, &newstate)) return -EINVAL; - freqs.old = _speedstep_get(policy->cpus); + policy_cpu = cpumask_any_and(policy->cpus, cpu_online_mask); + freqs.old = speedstep_get(policy_cpu); freqs.new = speedstep_freqs[newstate].frequency; freqs.cpu = policy->cpu; @@ -276,20 +288,13 @@ static int speedstep_target(struct cpufreq_policy *policy, if (freqs.old == freqs.new) return 0; - cpus_allowed = current->cpus_allowed; - for_each_cpu(i, policy->cpus) { freqs.cpu = i; cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); } - /* switch to physical CPU where state is to be changed */ - set_cpus_allowed_ptr(current, policy->cpus); - - speedstep_set_state(newstate); - - /* allow to be run on all CPUs */ - set_cpus_allowed_ptr(current, &cpus_allowed); + smp_call_function_single(policy_cpu, _speedstep_set_state, &newstate, + true); for_each_cpu(i, policy->cpus) { freqs.cpu = i; @@ -312,33 +317,43 @@ static int speedstep_verify(struct cpufreq_policy *policy) return cpufreq_frequency_table_verify(policy, &speedstep_freqs[0]); } +struct get_freqs { + struct cpufreq_policy *policy; + int ret; +}; + +static void get_freqs_on_cpu(void *_get_freqs) +{ + struct get_freqs *get_freqs = _get_freqs; + + get_freqs->ret = + speedstep_get_freqs(speedstep_processor, + &speedstep_freqs[SPEEDSTEP_LOW].frequency, + &speedstep_freqs[SPEEDSTEP_HIGH].frequency, + &get_freqs->policy->cpuinfo.transition_latency, + &speedstep_set_state); +} static int speedstep_cpu_init(struct cpufreq_policy *policy) { - int result = 0; - unsigned int speed; - cpumask_t cpus_allowed; + int result; + unsigned int policy_cpu, speed; + struct get_freqs gf; /* only run on CPU to be set, or on its sibling */ #ifdef CONFIG_SMP cpumask_copy(policy->cpus, cpu_sibling_mask(policy->cpu)); #endif - - cpus_allowed = current->cpus_allowed; - set_cpus_allowed_ptr(current, policy->cpus); + policy_cpu = cpumask_any_and(policy->cpus, cpu_online_mask); /* detect low and high frequency and transition latency */ - result = speedstep_get_freqs(speedstep_processor, - &speedstep_freqs[SPEEDSTEP_LOW].frequency, - &speedstep_freqs[SPEEDSTEP_HIGH].frequency, - &policy->cpuinfo.transition_latency, - &speedstep_set_state); - set_cpus_allowed_ptr(current, &cpus_allowed); - if (result) - return result; + gf.policy = policy; + smp_call_function_single(policy_cpu, get_freqs_on_cpu, &gf, 1); + if (gf.ret) + return gf.ret; /* get current speed setting */ - speed = _speedstep_get(policy->cpus); + speed = speedstep_get(policy_cpu); if (!speed) return -EIO; diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c index 2e3c686..f4c290b 100644 --- a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c +++ b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c @@ -226,6 +226,7 @@ static unsigned int pentium4_get_frequency(void) } +/* Warning: may get called from smp_call_function_single. */ unsigned int speedstep_get_frequency(unsigned int processor) { switch (processor) { -- cgit v1.1 From e3f996c26ff6c4c084aaaa64dce6e54d31f517be Mon Sep 17 00:00:00 2001 From: Rusty Russell <rusty@rustcorp.com.au> Date: Thu, 11 Jun 2009 22:59:58 +0930 Subject: [CPUFREQ] cpumask: avoid cpumask games in arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c Impact: don't play with current's cpumask It's generally a very bad idea to mug some process's cpumask: it could legitimately and reasonably be changed by root, which could break us (if done before our code) or them (if we restore the wrong value). Use rdmsr_on_cpu and wrmsr_on_cpu instead. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> To: cpufreq@vger.kernel.org Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Dave Jones <davej@redhat.com> --- arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c | 60 +++++++----------------- 1 file changed, 17 insertions(+), 43 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c index 55c831e..8d672ef 100644 --- a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c +++ b/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c @@ -323,14 +323,8 @@ static unsigned int get_cur_freq(unsigned int cpu) { unsigned l, h; unsigned clock_freq; - cpumask_t saved_mask; - saved_mask = current->cpus_allowed; - set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu)); - if (smp_processor_id() != cpu) - return 0; - - rdmsr(MSR_IA32_PERF_STATUS, l, h); + rdmsr_on_cpu(cpu, MSR_IA32_PERF_STATUS, &l, &h); clock_freq = extract_clock(l, cpu, 0); if (unlikely(clock_freq == 0)) { @@ -340,11 +334,9 @@ static unsigned int get_cur_freq(unsigned int cpu) * P-state transition (like TM2). Get the last freq set * in PERF_CTL. */ - rdmsr(MSR_IA32_PERF_CTL, l, h); + rdmsr_on_cpu(cpu, MSR_IA32_PERF_CTL, &l, &h); clock_freq = extract_clock(l, cpu, 1); } - - set_cpus_allowed_ptr(current, &saved_mask); return clock_freq; } @@ -467,15 +459,10 @@ static int centrino_target (struct cpufreq_policy *policy, struct cpufreq_freqs freqs; int retval = 0; unsigned int j, k, first_cpu, tmp; - cpumask_var_t saved_mask, covered_cpus; + cpumask_var_t covered_cpus; - if (unlikely(!alloc_cpumask_var(&saved_mask, GFP_KERNEL))) - return -ENOMEM; - if (unlikely(!zalloc_cpumask_var(&covered_cpus, GFP_KERNEL))) { - free_cpumask_var(saved_mask); + if (unlikely(!zalloc_cpumask_var(&covered_cpus, GFP_KERNEL))) return -ENOMEM; - } - cpumask_copy(saved_mask, ¤t->cpus_allowed); if (unlikely(per_cpu(centrino_model, cpu) == NULL)) { retval = -ENODEV; @@ -493,7 +480,7 @@ static int centrino_target (struct cpufreq_policy *policy, first_cpu = 1; for_each_cpu(j, policy->cpus) { - const struct cpumask *mask; + int good_cpu; /* cpufreq holds the hotplug lock, so we are safe here */ if (!cpu_online(j)) @@ -504,32 +491,30 @@ static int centrino_target (struct cpufreq_policy *policy, * Make sure we are running on CPU that wants to change freq */ if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY) - mask = policy->cpus; + good_cpu = cpumask_any_and(policy->cpus, + cpu_online_mask); else - mask = cpumask_of(j); + good_cpu = j; - set_cpus_allowed_ptr(current, mask); - preempt_disable(); - if (unlikely(!cpu_isset(smp_processor_id(), *mask))) { + if (good_cpu >= nr_cpu_ids) { dprintk("couldn't limit to CPUs in this domain\n"); retval = -EAGAIN; if (first_cpu) { /* We haven't started the transition yet. */ - goto migrate_end; + goto out; } - preempt_enable(); break; } msr = per_cpu(centrino_model, cpu)->op_points[newstate].index; if (first_cpu) { - rdmsr(MSR_IA32_PERF_CTL, oldmsr, h); + rdmsr_on_cpu(good_cpu, MSR_IA32_PERF_CTL, &oldmsr, &h); if (msr == (oldmsr & 0xffff)) { dprintk("no change needed - msr was and needs " "to be %x\n", oldmsr); retval = 0; - goto migrate_end; + goto out; } freqs.old = extract_clock(oldmsr, cpu, 0); @@ -553,14 +538,11 @@ static int centrino_target (struct cpufreq_policy *policy, oldmsr |= msr; } - wrmsr(MSR_IA32_PERF_CTL, oldmsr, h); - if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY) { - preempt_enable(); + wrmsr_on_cpu(good_cpu, MSR_IA32_PERF_CTL, oldmsr, h); + if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY) break; - } - cpu_set(j, *covered_cpus); - preempt_enable(); + cpumask_set_cpu(j, covered_cpus); } for_each_cpu(k, policy->cpus) { @@ -578,10 +560,8 @@ static int centrino_target (struct cpufreq_policy *policy, * Best effort undo.. */ - for_each_cpu_mask_nr(j, *covered_cpus) { - set_cpus_allowed_ptr(current, &cpumask_of_cpu(j)); - wrmsr(MSR_IA32_PERF_CTL, oldmsr, h); - } + for_each_cpu(j, covered_cpus) + wrmsr_on_cpu(j, MSR_IA32_PERF_CTL, oldmsr, h); tmp = freqs.new; freqs.new = freqs.old; @@ -593,15 +573,9 @@ static int centrino_target (struct cpufreq_policy *policy, cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); } } - set_cpus_allowed_ptr(current, saved_mask); retval = 0; - goto out; -migrate_end: - preempt_enable(); - set_cpus_allowed_ptr(current, saved_mask); out: - free_cpumask_var(saved_mask); free_cpumask_var(covered_cpus); return retval; } -- cgit v1.1 From 1ff6e97f1d993dff2f9b6f4a9173687370660232 Mon Sep 17 00:00:00 2001 From: Rusty Russell <rusty@rustcorp.com.au> Date: Fri, 12 Jun 2009 20:55:37 +0930 Subject: [CPUFREQ] cpumask: avoid playing with cpus_allowed in powernow-k8.c cpumask: avoid playing with cpus_allowed in powernow-k8.c It's generally a very bad idea to mug some process's cpumask: it could legitimately and reasonably be changed by root, which could break us (if done before our code) or them (if we restore the wrong value). I did not replace powernowk8_target; it needs fixing, but it grabs a mutex (so no smp_call_function_single here) but Mark points out it can be called multiple times per second, so work_on_cpu is too heavy. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> To: cpufreq@vger.kernel.org Acked-by: Mark Langsdorf <mark.langsdorf@amd.com> Tested-by: Mark Langsdorf <mark.langsdorf@amd.com> Signed-off-by: Dave Jones <davej@redhat.com> --- arch/x86/kernel/cpu/cpufreq/powernow-k8.c | 118 +++++++++++++++--------------- 1 file changed, 60 insertions(+), 58 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c index 20c7b99..1f55547 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c @@ -508,41 +508,34 @@ static int core_voltage_post_transition(struct powernow_k8_data *data, return 0; } -static int check_supported_cpu(unsigned int cpu) +static void check_supported_cpu(void *_rc) { - cpumask_t oldmask; u32 eax, ebx, ecx, edx; - unsigned int rc = 0; - - oldmask = current->cpus_allowed; - set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu)); + int *rc = _rc; - if (smp_processor_id() != cpu) { - printk(KERN_ERR PFX "limiting to cpu %u failed\n", cpu); - goto out; - } + *rc = -ENODEV; if (current_cpu_data.x86_vendor != X86_VENDOR_AMD) - goto out; + return; eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE); if (((eax & CPUID_XFAM) != CPUID_XFAM_K8) && ((eax & CPUID_XFAM) < CPUID_XFAM_10H)) - goto out; + return; if ((eax & CPUID_XFAM) == CPUID_XFAM_K8) { if (((eax & CPUID_USE_XFAM_XMOD) != CPUID_USE_XFAM_XMOD) || ((eax & CPUID_XMOD) > CPUID_XMOD_REV_MASK)) { printk(KERN_INFO PFX "Processor cpuid %x not supported\n", eax); - goto out; + return; } eax = cpuid_eax(CPUID_GET_MAX_CAPABILITIES); if (eax < CPUID_FREQ_VOLT_CAPABILITIES) { printk(KERN_INFO PFX "No frequency change capabilities detected\n"); - goto out; + return; } cpuid(CPUID_FREQ_VOLT_CAPABILITIES, &eax, &ebx, &ecx, &edx); @@ -550,21 +543,17 @@ static int check_supported_cpu(unsigned int cpu) != P_STATE_TRANSITION_CAPABLE) { printk(KERN_INFO PFX "Power state transitions not supported\n"); - goto out; + return; } } else { /* must be a HW Pstate capable processor */ cpuid(CPUID_FREQ_VOLT_CAPABILITIES, &eax, &ebx, &ecx, &edx); if ((edx & USE_HW_PSTATE) == USE_HW_PSTATE) cpu_family = CPU_HW_PSTATE; else - goto out; + return; } - rc = 1; - -out: - set_cpus_allowed_ptr(current, &oldmask); - return rc; + *rc = 0; } static int check_pst_table(struct powernow_k8_data *data, struct pst_s *pst, @@ -1247,6 +1236,32 @@ static int powernowk8_verify(struct cpufreq_policy *pol) return cpufreq_frequency_table_verify(pol, data->powernow_table); } +struct init_on_cpu { + struct powernow_k8_data *data; + int rc; +}; + +static void __cpuinit powernowk8_cpu_init_on_cpu(void *_init_on_cpu) +{ + struct init_on_cpu *init_on_cpu = _init_on_cpu; + + if (pending_bit_stuck()) { + printk(KERN_ERR PFX "failing init, change pending bit set\n"); + init_on_cpu->rc = -ENODEV; + return; + } + + if (query_current_values_with_pending_wait(init_on_cpu->data)) { + init_on_cpu->rc = -ENODEV; + return; + } + + if (cpu_family == CPU_OPTERON) + fidvid_msr_init(); + + init_on_cpu->rc = 0; +} + /* per CPU init entry point to the driver */ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) { @@ -1254,13 +1269,14 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) KERN_ERR FW_BUG PFX "No compatible ACPI _PSS objects found.\n" KERN_ERR FW_BUG PFX "Try again with latest BIOS.\n"; struct powernow_k8_data *data; - cpumask_t oldmask; + struct init_on_cpu init_on_cpu; int rc; if (!cpu_online(pol->cpu)) return -ENODEV; - if (!check_supported_cpu(pol->cpu)) + smp_call_function_single(pol->cpu, check_supported_cpu, &rc, 1); + if (rc) return -ENODEV; data = kzalloc(sizeof(struct powernow_k8_data), GFP_KERNEL); @@ -1300,27 +1316,12 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) pol->cpuinfo.transition_latency = get_transition_latency(data); /* only run on specific CPU from here on */ - oldmask = current->cpus_allowed; - set_cpus_allowed_ptr(current, &cpumask_of_cpu(pol->cpu)); - - if (smp_processor_id() != pol->cpu) { - printk(KERN_ERR PFX "limiting to cpu %u failed\n", pol->cpu); - goto err_out_unmask; - } - - if (pending_bit_stuck()) { - printk(KERN_ERR PFX "failing init, change pending bit set\n"); - goto err_out_unmask; - } - - if (query_current_values_with_pending_wait(data)) - goto err_out_unmask; - - if (cpu_family == CPU_OPTERON) - fidvid_msr_init(); - - /* run on any CPU again */ - set_cpus_allowed_ptr(current, &oldmask); + init_on_cpu.data = data; + smp_call_function_single(data->cpu, powernowk8_cpu_init_on_cpu, + &init_on_cpu, 1); + rc = init_on_cpu.rc; + if (rc != 0) + goto err_out_exit_acpi; if (cpu_family == CPU_HW_PSTATE) cpumask_copy(pol->cpus, cpumask_of(pol->cpu)); @@ -1357,8 +1358,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) return 0; -err_out_unmask: - set_cpus_allowed_ptr(current, &oldmask); +err_out_exit_acpi: powernow_k8_cpu_exit_acpi(data); err_out: @@ -1383,24 +1383,25 @@ static int __devexit powernowk8_cpu_exit(struct cpufreq_policy *pol) return 0; } +static void query_values_on_cpu(void *_err) +{ + int *err = _err; + struct powernow_k8_data *data = __get_cpu_var(powernow_data); + + *err = query_current_values_with_pending_wait(data); +} + static unsigned int powernowk8_get(unsigned int cpu) { struct powernow_k8_data *data = per_cpu(powernow_data, cpu); - cpumask_t oldmask = current->cpus_allowed; unsigned int khz = 0; + int err; if (!data) return -EINVAL; - set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu)); - if (smp_processor_id() != cpu) { - printk(KERN_ERR PFX - "limiting to CPU %d failed in powernowk8_get\n", cpu); - set_cpus_allowed_ptr(current, &oldmask); - return 0; - } - - if (query_current_values_with_pending_wait(data)) + smp_call_function_single(cpu, query_values_on_cpu, &err, true); + if (err) goto out; if (cpu_family == CPU_HW_PSTATE) @@ -1411,7 +1412,6 @@ static unsigned int powernowk8_get(unsigned int cpu) out: - set_cpus_allowed_ptr(current, &oldmask); return khz; } @@ -1437,7 +1437,9 @@ static int __cpuinit powernowk8_init(void) unsigned int i, supported_cpus = 0; for_each_online_cpu(i) { - if (check_supported_cpu(i)) + int rc; + smp_call_function_single(i, check_supported_cpu, &rc, 1); + if (rc == 0) supported_cpus++; } -- cgit v1.1 From 8e7c25971b1590776a90b249de3d859dd45e7414 Mon Sep 17 00:00:00 2001 From: Rusty Russell <rusty@rustcorp.com.au> Date: Fri, 12 Jun 2009 20:58:37 +0930 Subject: [CPUFREQ] cpumask: new cpumask operators for arch/x86/kernel/cpu/cpufreq/powernow-k8.c Remove all old-style cpumask operators, and cpumask_t. Also: get rid of the unused define_siblings function. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Mark Langsdorf <mark.langsdorf@amd.com> Tested-by: Mark Langsdorf <mark.langsdorf@amd.com> Signed-off-by: Dave Jones <davej@redhat.com> --- arch/x86/kernel/cpu/cpufreq/powernow-k8.c | 8 ++++---- arch/x86/kernel/cpu/cpufreq/powernow-k8.h | 11 ----------- 2 files changed, 4 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c index 1f55547..81cbe64 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c @@ -1094,7 +1094,7 @@ static int transition_frequency_fidvid(struct powernow_k8_data *data, freqs.old = find_khz_freq_from_fid(data->currfid); freqs.new = find_khz_freq_from_fid(fid); - for_each_cpu_mask_nr(i, *(data->available_cores)) { + for_each_cpu(i, data->available_cores) { freqs.cpu = i; cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); } @@ -1102,7 +1102,7 @@ static int transition_frequency_fidvid(struct powernow_k8_data *data, res = transition_fid_vid(data, fid, vid); freqs.new = find_khz_freq_from_fid(data->currfid); - for_each_cpu_mask_nr(i, *(data->available_cores)) { + for_each_cpu(i, data->available_cores) { freqs.cpu = i; cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); } @@ -1127,7 +1127,7 @@ static int transition_frequency_pstate(struct powernow_k8_data *data, data->currpstate); freqs.new = find_khz_freq_from_pstate(data->powernow_table, pstate); - for_each_cpu_mask_nr(i, *(data->available_cores)) { + for_each_cpu(i, data->available_cores) { freqs.cpu = i; cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); } @@ -1135,7 +1135,7 @@ static int transition_frequency_pstate(struct powernow_k8_data *data, res = transition_pstate(data, pstate); freqs.new = find_khz_freq_from_pstate(data->powernow_table, pstate); - for_each_cpu_mask_nr(i, *(data->available_cores)) { + for_each_cpu(i, data->available_cores) { freqs.cpu = i; cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); } diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h index 6c6698f..c9c1190 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h @@ -223,14 +223,3 @@ static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned static int fill_powernow_table_pstate(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table); static int fill_powernow_table_fidvid(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table); - -#ifdef CONFIG_SMP -static inline void define_siblings(int cpu, cpumask_t cpu_sharedcore_mask[]) -{ -} -#else -static inline void define_siblings(int cpu, cpumask_t cpu_sharedcore_mask[]) -{ - cpu_set(0, cpu_sharedcore_mask[0]); -} -#endif -- cgit v1.1 From 8b27fc6de184d66347e4aceeb5c0a4262732cc03 Mon Sep 17 00:00:00 2001 From: Paul Mundt <lethal@linux-sh.org> Date: Tue, 16 Jun 2009 03:58:25 +0900 Subject: sh: Set EARLY_SCIF_CONSOLE_PORT sanely for SH7786. Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/Kconfig.debug | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug index 8179cc9..8ece0b5 100644 --- a/arch/sh/Kconfig.debug +++ b/arch/sh/Kconfig.debug @@ -39,6 +39,7 @@ config EARLY_SCIF_CONSOLE_PORT CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7366 || \ CPU_SUBTYPE_SH7343 default "0xffea0000" if CPU_SUBTYPE_SH7785 + default "0xffeb0000" if CPU_SUBTYPE_SH7786 default "0xfffe8000" if CPU_SUBTYPE_SH7203 default "0xfffe9800" if CPU_SUBTYPE_SH7206 || CPU_SUBTYPE_SH7263 default "0xffe80000" if CPU_SH4 -- cgit v1.1 From 724cfb944007b7f8d346523a7810b53a35921bc5 Mon Sep 17 00:00:00 2001 From: Magnus Damm <damm@igel.co.jp> Date: Tue, 28 Apr 2009 08:02:13 +0000 Subject: sh: smsc911x support for the rsk7203 board This patch adds support for the LAN9118 ethernet on rsk7203. The LAN9118 controller is hooked up using a 16-bit data bus, but the rsk7203 board does not swap the byte lanes as needed between the sh7203 processor and the the ethernet controller. In the processor the CS memory window is configured in 16-bit mode but the smsc911x driver is told to do 32-bit accesses to improve performance. The SMSC911X_SWAP_FIFO flag is used to tell the driver to do software byte swapping of fifo data. Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/boards/mach-rsk/devices-rsk7203.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/sh/boards/mach-rsk/devices-rsk7203.c b/arch/sh/boards/mach-rsk/devices-rsk7203.c index d8a65ea..4af3a77 100644 --- a/arch/sh/boards/mach-rsk/devices-rsk7203.c +++ b/arch/sh/boards/mach-rsk/devices-rsk7203.c @@ -26,13 +26,13 @@ static struct smsc911x_platform_config smsc911x_config = { .phy_interface = PHY_INTERFACE_MODE_MII, .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, - .flags = SMSC911X_USE_16BIT, + .flags = SMSC911X_USE_32BIT | SMSC911X_SWAP_FIFO, }; static struct resource smsc911x_resources[] = { [0] = { .start = 0x24000000, - .end = 0x24000000 + 0x100, + .end = 0x240000ff, .flags = IORESOURCE_MEM, }, [1] = { @@ -99,6 +99,10 @@ static int __init rsk7203_devices_setup(void) gpio_request(GPIO_FN_TXD0, NULL); gpio_request(GPIO_FN_RXD0, NULL); + /* Setup LAN9118: CS1 in 16-bit Big Endian Mode, IRQ0 at Port B */ + ctrl_outl(0x36db0400, 0xfffc0008); /* CS1BCR */ + gpio_request(GPIO_FN_IRQ0_PB, NULL); + return platform_add_devices(rsk7203_devices, ARRAY_SIZE(rsk7203_devices)); } -- cgit v1.1 From 8c6b44d00aca45edf69b35220ba4dce962c482f8 Mon Sep 17 00:00:00 2001 From: Paul Mundt <lethal@linux-sh.org> Date: Tue, 16 Jun 2009 06:01:58 +0900 Subject: sh: pci: Allow register_pci_controller() to handle overlapping regions. Some host controllers (such as SH7786) have overlapping regions that are fixed in hardware. The resource allocator does the right thing in managing this space already, so the conflict case is non-fatal. Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/drivers/pci/pci.c | 14 ++------------ 1 file changed, 2 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c index 54d77cb..9a1c423 100644 --- a/arch/sh/drivers/pci/pci.c +++ b/arch/sh/drivers/pci/pci.c @@ -53,12 +53,8 @@ static DEFINE_MUTEX(pci_scan_mutex); void __devinit register_pci_controller(struct pci_channel *hose) { - if (request_resource(&iomem_resource, hose->mem_resource) < 0) - goto out; - if (request_resource(&ioport_resource, hose->io_resource) < 0) { - release_resource(hose->mem_resource); - goto out; - } + request_resource(&iomem_resource, hose->mem_resource); + request_resource(&ioport_resource, hose->io_resource); *hose_tail = hose; hose_tail = &hose->next; @@ -80,12 +76,6 @@ void __devinit register_pci_controller(struct pci_channel *hose) pcibios_scanbus(hose); mutex_unlock(&pci_scan_mutex); } - - return; - -out: - printk(KERN_WARNING - "Skipping PCI bus scan due to resource conflict\n"); } static int __init pcibios_init(void) -- cgit v1.1 From 5102aa4acdbde305646ae60c5eec7042b5016a0e Mon Sep 17 00:00:00 2001 From: Michel Pollet <buserror@gmail.com> Date: Wed, 25 Mar 2009 17:19:14 +0000 Subject: [ARM] MINI2440: Add machine support The MINI2440 is a chinese made s3c2440 development board with a large set of peripherals. This patch provides machine support for almost all the features of the board. Since it can come with various "options" fitted, a kernel parameter is used to specify the lcd size, backlight control and touchscreen. Signed-off-by: Michel Pollet <buserror@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> --- arch/arm/mach-s3c2440/Kconfig | 10 + arch/arm/mach-s3c2440/Makefile | 1 + arch/arm/mach-s3c2440/mach-mini2440.c | 706 ++++++++++++++++++++++++++++++++++ 3 files changed, 717 insertions(+) create mode 100644 arch/arm/mach-s3c2440/mach-mini2440.c (limited to 'arch') diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig index 5df73cb..8cfeaec 100644 --- a/arch/arm/mach-s3c2440/Kconfig +++ b/arch/arm/mach-s3c2440/Kconfig @@ -84,5 +84,15 @@ config MACH_AT2440EVB help Say Y here if you are using the AT2440EVB development board +config MACH_MINI2440 + bool "MINI2440 development board" + select CPU_S3C2440 + select EEPROM_AT24 + select LEDS_TRIGGER_BACKLIGHT + select SND_S3C24XX_SOC_S3C24XX_UDA134X + help + Say Y here to select support for the MINI2440. Is a 10cm x 10cm board + available via various sources. It can come with a 3.5" or 7" touch LCD. + endmenu diff --git a/arch/arm/mach-s3c2440/Makefile b/arch/arm/mach-s3c2440/Makefile index 0b4440e..bfadcf6 100644 --- a/arch/arm/mach-s3c2440/Makefile +++ b/arch/arm/mach-s3c2440/Makefile @@ -22,3 +22,4 @@ obj-$(CONFIG_MACH_RX3715) += mach-rx3715.o obj-$(CONFIG_ARCH_S3C2440) += mach-smdk2440.o obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o +obj-$(CONFIG_MACH_MINI2440) += mach-mini2440.o diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c new file mode 100644 index 0000000..eb4b245 --- /dev/null +++ b/arch/arm/mach-s3c2440/mach-mini2440.c @@ -0,0 +1,706 @@ +/* linux/arch/arm/mach-s3c2440/mach-mini2440.c + * + * Copyright (c) 2008 Ramax Lo <ramaxlo@gmail.com> + * Based on mach-anubis.c by Ben Dooks <ben@simtec.co.uk> + * and modifications by SBZ <sbz@spgui.org> and + * Weibing <http://weibing.blogbus.com> and + * Michel Pollet <buserror@gmail.com> + * + * For product information, visit http://code.google.com/p/mini2440/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/gpio.h> +#include <linux/input.h> +#include <linux/io.h> +#include <linux/serial_core.h> +#include <linux/dm9000.h> +#include <linux/i2c/at24.h> +#include <linux/platform_device.h> +#include <linux/gpio_keys.h> +#include <linux/i2c.h> +#include <linux/mmc/host.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <mach/hardware.h> +#include <mach/fb.h> +#include <asm/mach-types.h> + +#include <plat/regs-serial.h> +#include <mach/regs-gpio.h> +#include <mach/leds-gpio.h> +#include <mach/regs-mem.h> +#include <mach/regs-lcd.h> +#include <mach/irqs.h> +#include <plat/nand.h> +#include <plat/iic.h> +#include <plat/mci.h> +#include <plat/udc.h> + +#include <plat/regs-serial.h> +#include <mach/regs-gpio.h> +#include <mach/regs-mem.h> +#include <mach/regs-lcd.h> + +#include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/nand_ecc.h> +#include <linux/mtd/partitions.h> + +#include <plat/clock.h> +#include <plat/devs.h> +#include <plat/cpu.h> + +#include <sound/s3c24xx_uda134x.h> + +#define MACH_MINI2440_DM9K_BASE (S3C2410_CS4 + 0x300) + +static struct map_desc mini2440_iodesc[] __initdata = { + /* nothing to declare, move along */ +}; + +#define UCON S3C2410_UCON_DEFAULT +#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB +#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE + + +static struct s3c2410_uartcfg mini2440_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, +}; + +/* USB device UDC support */ + +static void mini2440_udc_pullup(enum s3c2410_udc_cmd_e cmd) +{ + pr_debug("udc: pullup(%d)\n", cmd); + + switch (cmd) { + case S3C2410_UDC_P_ENABLE : + s3c2410_gpio_setpin(S3C2410_GPC(5), 1); + break; + case S3C2410_UDC_P_DISABLE : + s3c2410_gpio_setpin(S3C2410_GPC(5), 0); + break; + case S3C2410_UDC_P_RESET : + break; + default: + break; + } +} + +static struct s3c2410_udc_mach_info mini2440_udc_cfg __initdata = { + .udc_command = mini2440_udc_pullup, +}; + + +/* LCD timing and setup */ + +/* + * This macro simplifies the table bellow + */ +#define _LCD_DECLARE(_clock,_xres,margin_left,margin_right,hsync, \ + _yres,margin_top,margin_bottom,vsync, refresh) \ + .width = _xres, \ + .xres = _xres, \ + .height = _yres, \ + .yres = _yres, \ + .left_margin = margin_left, \ + .right_margin = margin_right, \ + .upper_margin = margin_top, \ + .lower_margin = margin_bottom, \ + .hsync_len = hsync, \ + .vsync_len = vsync, \ + .pixclock = ((_clock*100000000000LL) / \ + ((refresh) * \ + (hsync + margin_left + _xres + margin_right) * \ + (vsync + margin_top + _yres + margin_bottom))), \ + .bpp = 16,\ + .type = (S3C2410_LCDCON1_TFT16BPP |\ + S3C2410_LCDCON1_TFT) + +struct s3c2410fb_display mini2440_lcd_cfg[] __initdata = { + [0] = { /* mini2440 + 3.5" TFT + touchscreen */ + _LCD_DECLARE( + 7, /* The 3.5 is quite fast */ + 240, 21, 38, 6, /* x timing */ + 320, 4, 4, 2, /* y timing */ + 60), /* refresh rate */ + .lcdcon5 = (S3C2410_LCDCON5_FRM565 | + S3C2410_LCDCON5_INVVLINE | + S3C2410_LCDCON5_INVVFRAME | + S3C2410_LCDCON5_INVVDEN | + S3C2410_LCDCON5_PWREN), + }, + [1] = { /* mini2440 + 7" TFT + touchscreen */ + _LCD_DECLARE( + 10, /* the 7" runs slower */ + 800, 40, 40, 48, /* x timing */ + 480, 29, 3, 3, /* y timing */ + 50), /* refresh rate */ + .lcdcon5 = (S3C2410_LCDCON5_FRM565 | + S3C2410_LCDCON5_INVVLINE | + S3C2410_LCDCON5_INVVFRAME | + S3C2410_LCDCON5_PWREN), + }, + /* The VGA shield can outout at several resolutions. All share + * the same timings, however, anything smaller than 1024x768 + * will only be displayed in the top left corner of a 1024x768 + * XGA output unless you add optional dip switches to the shield. + * Therefore timings for other resolutions have been ommited here. + */ + [2] = { + _LCD_DECLARE( + 10, + 1024, 1, 2, 2, /* y timing */ + 768, 200, 16, 16, /* x timing */ + 24), /* refresh rate, maximum stable, + tested with the FPGA shield */ + .lcdcon5 = (S3C2410_LCDCON5_FRM565 | + S3C2410_LCDCON5_HWSWP), + }, +}; + +/* todo - put into gpio header */ + +#define S3C2410_GPCCON_MASK(x) (3 << ((x) * 2)) +#define S3C2410_GPDCON_MASK(x) (3 << ((x) * 2)) + +struct s3c2410fb_mach_info mini2440_fb_info __initdata = { + .displays = &mini2440_lcd_cfg[0], /* not constant! see init */ + .num_displays = 1, + .default_display = 0, + + /* Enable VD[2..7], VD[10..15], VD[18..23] and VCLK, syncs, VDEN + * and disable the pull down resistors on pins we are using for LCD + * data. */ + + .gpcup = (0xf << 1) | (0x3f << 10), + + .gpccon = (S3C2410_GPC1_VCLK | S3C2410_GPC2_VLINE | + S3C2410_GPC3_VFRAME | S3C2410_GPC4_VM | + S3C2410_GPC10_VD2 | S3C2410_GPC11_VD3 | + S3C2410_GPC12_VD4 | S3C2410_GPC13_VD5 | + S3C2410_GPC14_VD6 | S3C2410_GPC15_VD7), + + .gpccon_mask = (S3C2410_GPCCON_MASK(1) | S3C2410_GPCCON_MASK(2) | + S3C2410_GPCCON_MASK(3) | S3C2410_GPCCON_MASK(4) | + S3C2410_GPCCON_MASK(10) | S3C2410_GPCCON_MASK(11) | + S3C2410_GPCCON_MASK(12) | S3C2410_GPCCON_MASK(13) | + S3C2410_GPCCON_MASK(14) | S3C2410_GPCCON_MASK(15)), + + .gpdup = (0x3f << 2) | (0x3f << 10), + + .gpdcon = (S3C2410_GPD2_VD10 | S3C2410_GPD3_VD11 | + S3C2410_GPD4_VD12 | S3C2410_GPD5_VD13 | + S3C2410_GPD6_VD14 | S3C2410_GPD7_VD15 | + S3C2410_GPD10_VD18 | S3C2410_GPD11_VD19 | + S3C2410_GPD12_VD20 | S3C2410_GPD13_VD21 | + S3C2410_GPD14_VD22 | S3C2410_GPD15_VD23), + + .gpdcon_mask = (S3C2410_GPDCON_MASK(2) | S3C2410_GPDCON_MASK(3) | + S3C2410_GPDCON_MASK(4) | S3C2410_GPDCON_MASK(5) | + S3C2410_GPDCON_MASK(6) | S3C2410_GPDCON_MASK(7) | + S3C2410_GPDCON_MASK(10) | S3C2410_GPDCON_MASK(11)| + S3C2410_GPDCON_MASK(12) | S3C2410_GPDCON_MASK(13)| + S3C2410_GPDCON_MASK(14) | S3C2410_GPDCON_MASK(15)), +}; + +/* MMC/SD */ + +static struct s3c24xx_mci_pdata mini2440_mmc_cfg __initdata = { + .gpio_detect = S3C2410_GPG(8), + .gpio_wprotect = S3C2410_GPH(8), + .set_power = NULL, + .ocr_avail = MMC_VDD_32_33|MMC_VDD_33_34, +}; + +/* NAND Flash on MINI2440 board */ + +static struct mtd_partition mini2440_default_nand_part[] __initdata = { + [0] = { + .name = "u-boot", + .size = SZ_256K, + .offset = 0, + }, + [1] = { + .name = "u-boot-env", + .size = SZ_128K, + .offset = SZ_256K, + }, + [2] = { + .name = "kernel", + /* 5 megabytes, for a kernel with no modules + * or a uImage with a ramdisk attached */ + .size = 0x00500000, + .offset = SZ_256K + SZ_128K, + }, + [3] = { + .name = "root", + .offset = SZ_256K + SZ_128K + 0x00500000, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct s3c2410_nand_set mini2440_nand_sets[] __initdata = { + [0] = { + .name = "nand", + .nr_chips = 1, + .nr_partitions = ARRAY_SIZE(mini2440_default_nand_part), + .partitions = mini2440_default_nand_part, + }, +}; + +static struct s3c2410_platform_nand mini2440_nand_info __initdata = { + .tacls = 0, + .twrph0 = 25, + .twrph1 = 15, + .nr_sets = ARRAY_SIZE(mini2440_nand_sets), + .sets = mini2440_nand_sets, + .ignore_unset_ecc = 1, +}; + +/* DM9000AEP 10/100 ethernet controller */ + +static struct resource mini2440_dm9k_resource[] __initdata = { + [0] = { + .start = MACH_MINI2440_DM9K_BASE, + .end = MACH_MINI2440_DM9K_BASE + 3, + .flags = IORESOURCE_MEM + }, + [1] = { + .start = MACH_MINI2440_DM9K_BASE + 4, + .end = MACH_MINI2440_DM9K_BASE + 7, + .flags = IORESOURCE_MEM + }, + [2] = { + .start = IRQ_EINT7, + .end = IRQ_EINT7, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, + } +}; + +/* + * The DM9000 has no eeprom, and it's MAC address is set by + * the bootloader before starting the kernel. + */ +static struct dm9000_plat_data mini2440_dm9k_pdata __initdata = { + .flags = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM), +}; + +static struct platform_device mini2440_device_eth __initdata = { + .name = "dm9000", + .id = -1, + .num_resources = ARRAY_SIZE(mini2440_dm9k_resource), + .resource = mini2440_dm9k_resource, + .dev = { + .platform_data = &mini2440_dm9k_pdata, + }, +}; + +/* CON5 + * +--+ /-----\ + * | | | | + * | | | BAT | + * | | \_____/ + * | | + * | | +----+ +----+ + * | | | K5 | | K1 | + * | | +----+ +----+ + * | | +----+ +----+ + * | | | K4 | | K2 | + * | | +----+ +----+ + * | | +----+ +----+ + * | | | K6 | | K3 | + * | | +----+ +----+ + * ..... + */ +static struct gpio_keys_button mini2440_buttons[] __initdata = { + { + .gpio = S3C2410_GPG(0), /* K1 */ + .code = KEY_F1, + .desc = "Button 1", + .active_low = 1, + }, + { + .gpio = S3C2410_GPG(3), /* K2 */ + .code = KEY_F2, + .desc = "Button 2", + .active_low = 1, + }, + { + .gpio = S3C2410_GPG(5), /* K3 */ + .code = KEY_F3, + .desc = "Button 3", + .active_low = 1, + }, + { + .gpio = S3C2410_GPG(6), /* K4 */ + .code = KEY_POWER, + .desc = "Power", + .active_low = 1, + }, + { + .gpio = S3C2410_GPG(7), /* K5 */ + .code = KEY_F5, + .desc = "Button 5", + .active_low = 1, + }, +#if 0 + /* this pin is also known as TCLK1 and seems to already + * marked as "in use" somehow in the kernel -- possibly wrongly */ + { + .gpio = S3C2410_GPG(11), /* K6 */ + .code = KEY_F6, + .desc = "Button 6", + .active_low = 1, + }, +#endif +}; + +static struct gpio_keys_platform_data mini2440_button_data __initdata = { + .buttons = mini2440_buttons, + .nbuttons = ARRAY_SIZE(mini2440_buttons), +}; + +static struct platform_device mini2440_button_device __initdata = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &mini2440_button_data, + } +}; + +/* LEDS */ + +static struct s3c24xx_led_platdata mini2440_led1_pdata __initdata = { + .name = "led1", + .gpio = S3C2410_GPB(5), + .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE, + .def_trigger = "heartbeat", +}; + +static struct s3c24xx_led_platdata mini2440_led2_pdata __initdata = { + .name = "led2", + .gpio = S3C2410_GPB(6), + .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE, + .def_trigger = "nand-disk", +}; + +static struct s3c24xx_led_platdata mini2440_led3_pdata __initdata = { + .name = "led3", + .gpio = S3C2410_GPB(7), + .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE, + .def_trigger = "mmc0", +}; + +static struct s3c24xx_led_platdata mini2440_led4_pdata __initdata = { + .name = "led4", + .gpio = S3C2410_GPB(8), + .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE, + .def_trigger = "", +}; + +static struct s3c24xx_led_platdata mini2440_led_backlight_pdata __initdata = { + .name = "backlight", + .gpio = S3C2410_GPG(4), + .def_trigger = "backlight", +}; + +static struct platform_device mini2440_led1 __initdata = { + .name = "s3c24xx_led", + .id = 1, + .dev = { + .platform_data = &mini2440_led1_pdata, + }, +}; + +static struct platform_device mini2440_led2 __initdata = { + .name = "s3c24xx_led", + .id = 2, + .dev = { + .platform_data = &mini2440_led2_pdata, + }, +}; + +static struct platform_device mini2440_led3 __initdata = { + .name = "s3c24xx_led", + .id = 3, + .dev = { + .platform_data = &mini2440_led3_pdata, + }, +}; + +static struct platform_device mini2440_led4 __initdata = { + .name = "s3c24xx_led", + .id = 4, + .dev = { + .platform_data = &mini2440_led4_pdata, + }, +}; + +static struct platform_device mini2440_led_backlight __initdata = { + .name = "s3c24xx_led", + .id = 5, + .dev = { + .platform_data = &mini2440_led_backlight_pdata, + }, +}; + +/* AUDIO */ + +static struct s3c24xx_uda134x_platform_data mini2440_audio_pins __initdata = { + .l3_clk = S3C2410_GPB(4), + .l3_mode = S3C2410_GPB(2), + .l3_data = S3C2410_GPB(3), + .model = UDA134X_UDA1341 +}; + +static struct platform_device mini2440_audio __initdata = { + .name = "s3c24xx_uda134x", + .id = 0, + .dev = { + .platform_data = &mini2440_audio_pins, + }, +}; + +/* + * I2C devices + */ +static struct at24_platform_data at24c08 = { + .byte_len = SZ_8K / 8, + .page_size = 16, +}; + +static struct i2c_board_info mini2440_i2c_devs[] __initdata = { + { + I2C_BOARD_INFO("24c08", 0x50), + .platform_data = &at24c08, + }, +}; + +static struct platform_device *mini2440_devices[] __initdata = { + &s3c_device_usb, + &s3c_device_wdt, +/* &s3c_device_adc,*/ /* ADC doesn't like living with touchscreen ! */ + &s3c_device_i2c0, + &s3c_device_rtc, + &s3c_device_usbgadget, + &mini2440_device_eth, + &mini2440_led1, + &mini2440_led2, + &mini2440_led3, + &mini2440_led4, + &mini2440_button_device, + &s3c_device_nand, + &s3c_device_sdi, + &s3c_device_iis, + &mini2440_audio, +/* &s3c_device_timer[0],*/ /* buzzer pwm, no API for it */ + /* remaining devices are optional */ +}; + +static void __init mini2440_map_io(void) +{ + s3c24xx_init_io(mini2440_iodesc, ARRAY_SIZE(mini2440_iodesc)); + s3c24xx_init_clocks(12000000); + s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs)); + + s3c_device_nand.dev.platform_data = &mini2440_nand_info; + s3c_device_sdi.dev.platform_data = &mini2440_mmc_cfg; +} + +/* + * mini2440_features string + * + * t = Touchscreen present + * b = backlight control + * c = camera [TODO] + * 0-9 LCD configuration + * + */ +static char mini2440_features_str[12] __initdata = "0tb"; + +static int __init mini2440_features_setup(char *str) +{ + if (str) + strlcpy(mini2440_features_str, str, sizeof(mini2440_features_str)); + return 1; +} + +__setup("mini2440=", mini2440_features_setup); + +#define FEATURE_SCREEN (1 << 0) +#define FEATURE_BACKLIGHT (1 << 1) +#define FEATURE_TOUCH (1 << 2) +#define FEATURE_CAMERA (1 << 3) + +struct mini2440_features_t { + int count; + int done; + int lcd_index; + struct platform_device *optional[8]; +}; + +static void mini2440_parse_features( + struct mini2440_features_t * features, + const char * features_str ) +{ + const char * fp = features_str; + + features->count = 0; + features->done = 0; + features->lcd_index = -1; + + while (*fp) { + char f = *fp++; + + switch (f) { + case '0'...'9': /* tft screen */ + if (features->done & FEATURE_SCREEN) { + printk(KERN_INFO "MINI2440: '%c' ignored, " + "screen type already set\n", f); + } else { + int li = f - '0'; + if (li >= ARRAY_SIZE(mini2440_lcd_cfg)) + printk(KERN_INFO "MINI2440: " + "'%c' out of range LCD mode\n", f); + else { + features->optional[features->count++] = + &s3c_device_lcd; + features->lcd_index = li; + } + } + features->done |= FEATURE_SCREEN; + break; + case 'b': + if (features->done & FEATURE_BACKLIGHT) + printk(KERN_INFO "MINI2440: '%c' ignored, " + "backlight already set\n", f); + else { + features->optional[features->count++] = + &mini2440_led_backlight; + } + features->done |= FEATURE_BACKLIGHT; + break; + case 't': + printk(KERN_INFO "MINI2440: '%c' ignored, " + "touchscreen not compiled in\n", f); + break; + case 'c': + if (features->done & FEATURE_CAMERA) + printk(KERN_INFO "MINI2440: '%c' ignored, " + "camera already registered\n", f); + else + features->optional[features->count++] = + &s3c_device_camif; + features->done |= FEATURE_CAMERA; + break; + } + } +} + +static void __init mini2440_init(void) +{ + struct mini2440_features_t features = { 0 }; + int i; + + printk(KERN_INFO "MINI2440: Option string mini2440=%s\n", + mini2440_features_str); + + /* Parse the feature string */ + mini2440_parse_features(&features, mini2440_features_str); + + /* turn LCD on */ + s3c2410_gpio_cfgpin(S3C2410_GPC(0), S3C2410_GPC0_LEND); + + /* Turn the backlight early on */ + s3c2410_gpio_setpin(S3C2410_GPG(4), 1); + s3c2410_gpio_cfgpin(S3C2410_GPG(4), S3C2410_GPIO_OUTPUT); + + /* remove pullup on optional PWM backlight -- unused on 3.5 and 7"s */ + s3c2410_gpio_pullup(S3C2410_GPB(1), 0); + s3c2410_gpio_setpin(S3C2410_GPB(1), 0); + s3c2410_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPIO_INPUT); + + /* Make sure the D+ pullup pin is output */ + s3c2410_gpio_cfgpin(S3C2410_GPC(5), S3C2410_GPIO_OUTPUT); + + /* mark the key as input, without pullups (there is one on the board) */ + for (i = 0; i < ARRAY_SIZE(mini2440_buttons); i++) { + s3c2410_gpio_pullup(mini2440_buttons[i].gpio, 0); + s3c2410_gpio_cfgpin(mini2440_buttons[i].gpio, + S3C2410_GPIO_INPUT); + } + if (features.lcd_index != -1) { + int li; + + mini2440_fb_info.displays = + &mini2440_lcd_cfg[features.lcd_index]; + + printk(KERN_INFO "MINI2440: LCD"); + for (li = 0; li < ARRAY_SIZE(mini2440_lcd_cfg); li++) + if (li == features.lcd_index) + printk(" [%d:%dx%d]", li, + mini2440_lcd_cfg[li].width, + mini2440_lcd_cfg[li].height); + else + printk(" %d:%dx%d", li, + mini2440_lcd_cfg[li].width, + mini2440_lcd_cfg[li].height); + printk("\n"); + s3c24xx_fb_set_platdata(&mini2440_fb_info); + } + s3c24xx_udc_set_platdata(&mini2440_udc_cfg); + s3c_i2c0_set_platdata(NULL); + i2c_register_board_info(0, mini2440_i2c_devs, + ARRAY_SIZE(mini2440_i2c_devs)); + + platform_add_devices(mini2440_devices, ARRAY_SIZE(mini2440_devices)); + + if (features.count) /* the optional features */ + platform_add_devices(features.optional, features.count); + +} + + +MACHINE_START(MINI2440, "MINI2440") + /* Maintainer: Michel Pollet <buserror@gmail.com> */ + .phys_io = S3C2410_PA_UART, + .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, + .boot_params = S3C2410_SDRAM_PA + 0x100, + .map_io = mini2440_map_io, + .init_machine = mini2440_init, + .init_irq = s3c24xx_init_irq, + .timer = &s3c24xx_timer, +MACHINE_END -- cgit v1.1 From bf4a59f1524202f887c4595aedb1aa489bcd9b64 Mon Sep 17 00:00:00 2001 From: Michel Pollet <buserror@gmail.com> Date: Wed, 25 Mar 2009 17:24:08 +0000 Subject: [ARM] MINI2440: Create a mini2440_defconfig file Just a working, starting point config file for the board. Signed-off-by: Michel Pollet <buserror@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> --- arch/arm/configs/mini2440_defconfig | 2097 +++++++++++++++++++++++++++++++++++ 1 file changed, 2097 insertions(+) create mode 100644 arch/arm/configs/mini2440_defconfig (limited to 'arch') diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig new file mode 100644 index 0000000..e49ed40 --- /dev/null +++ b/arch/arm/configs/mini2440_defconfig @@ -0,0 +1,2097 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.30-rc6 +# Wed May 20 12:29:51 2009 +# +CONFIG_ARM=y +CONFIG_HAVE_PWM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +# CONFIG_GENERIC_TIME is not set +# CONFIG_GENERIC_CLOCKEVENTS is not set +CONFIG_MMU=y +CONFIG_NO_IOPORT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +CONFIG_RELAY=y +CONFIG_NAMESPACES=y +CONFIG_UTS_NS=y +CONFIG_IPC_NS=y +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_STRIP_ASM_SYMS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_COMPAT_BRK is not set +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +CONFIG_LBD=y +# CONFIG_BLK_DEV_BSG is not set +CONFIG_BLK_DEV_INTEGRITY=y + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_FREEZER=y + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +CONFIG_ARCH_S3C2410=y +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set +CONFIG_PLAT_S3C24XX=y +CONFIG_S3C2410_CLOCK=y +CONFIG_CPU_S3C244X=y +CONFIG_S3C24XX_PWM=y +CONFIG_S3C24XX_GPIO_EXTRA=0 +CONFIG_S3C2410_DMA=y +# CONFIG_S3C2410_DMA_DEBUG is not set +CONFIG_S3C24XX_ADC=y +CONFIG_PLAT_S3C=y +CONFIG_CPU_LLSERIAL_S3C2440_ONLY=y +CONFIG_CPU_LLSERIAL_S3C2440=y + +# +# Boot options +# +# CONFIG_S3C_BOOT_WATCHDOG is not set +# CONFIG_S3C_BOOT_ERROR_RESET is not set +CONFIG_S3C_BOOT_UART_FORCE_FIFO=y + +# +# Power management +# +# CONFIG_S3C2410_PM_DEBUG is not set +# CONFIG_S3C2410_PM_CHECK is not set +CONFIG_S3C_LOWLEVEL_UART_PORT=0 +CONFIG_S3C_GPIO_SPACE=0 + +# +# S3C2400 Machines +# +CONFIG_S3C2410_PM=y +CONFIG_S3C2410_GPIO=y + +# +# S3C2410 Machines +# +# CONFIG_ARCH_SMDK2410 is not set +# CONFIG_ARCH_H1940 is not set +# CONFIG_MACH_N30 is not set +# CONFIG_ARCH_BAST is not set +# CONFIG_MACH_OTOM is not set +# CONFIG_MACH_AML_M5900 is not set +# CONFIG_MACH_TCT_HAMMER is not set +# CONFIG_MACH_VR1000 is not set +# CONFIG_MACH_QT2410 is not set + +# +# S3C2412 Machines +# +# CONFIG_MACH_JIVE is not set +# CONFIG_MACH_SMDK2413 is not set +# CONFIG_MACH_SMDK2412 is not set +# CONFIG_MACH_VSTMS is not set +CONFIG_CPU_S3C2440=y +CONFIG_S3C2440_DMA=y + +# +# S3C2440 Machines +# +# CONFIG_MACH_ANUBIS is not set +# CONFIG_MACH_OSIRIS is not set +# CONFIG_MACH_RX3715 is not set +# CONFIG_ARCH_S3C2440 is not set +# CONFIG_MACH_NEXCODER_2440 is not set +# CONFIG_MACH_AT2440EVB is not set +CONFIG_MACH_MINI2440=y + +# +# S3C2442 Machines +# + +# +# S3C2443 Machines +# +# CONFIG_MACH_SMDK2443 is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM920T=y +CONFIG_CPU_32v4T=y +CONFIG_CPU_ABRT_EV4T=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_V4WT=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT is not set +CONFIG_HZ=200 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0 +CONFIG_ZBOOT_ROM_BSS=0 +CONFIG_CMDLINE="" +# CONFIG_XIP_KERNEL is not set +CONFIG_KEXEC=y +CONFIG_ATAGS_PROC=y + +# +# CPU Power Management +# +CONFIG_CPU_IDLE=y +CONFIG_CPU_IDLE_GOV_LADDER=y + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +CONFIG_BINFMT_AOUT=m +CONFIG_BINFMT_MISC=m + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_APM_EMULATION=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_NET_KEY=m +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=m +CONFIG_INET_TCP_DIAG=m +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y +CONFIG_BRIDGE_NETFILTER=y + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set +# CONFIG_NF_CONNTRACK is not set +# CONFIG_NETFILTER_XTABLES is not set +# CONFIG_IP_VS is not set + +# +# IP: Netfilter Configuration +# +# CONFIG_NF_DEFRAG_IPV4 is not set +# CONFIG_IP_NF_QUEUE is not set +# CONFIG_IP_NF_IPTABLES is not set +# CONFIG_IP_NF_ARPTABLES is not set +# CONFIG_BRIDGE_NF_EBTABLES is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +CONFIG_STP=m +CONFIG_GARP=m +CONFIG_BRIDGE=m +# CONFIG_NET_DSA is not set +CONFIG_VLAN_8021Q=m +CONFIG_VLAN_8021Q_GVRP=y +# CONFIG_DECNET is not set +CONFIG_LLC=m +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +CONFIG_NET_PKTGEN=m +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=m + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIBTUSB=m +CONFIG_BT_HCIBTSDIO=m +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_H4=y +CONFIG_BT_HCIUART_BCSP=y +CONFIG_BT_HCIUART_LL=y +CONFIG_BT_HCIBCM203X=m +CONFIG_BT_HCIBPA10X=m +CONFIG_BT_HCIBFUSB=m +CONFIG_BT_HCIVHCI=m +# CONFIG_AF_RXRPC is not set +CONFIG_FIB_RULES=y +CONFIG_WIRELESS=y +CONFIG_CFG80211=m +CONFIG_CFG80211_REG_DEBUG=y +CONFIG_WIRELESS_OLD_REGULATORY=y +CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +CONFIG_LIB80211=m +CONFIG_LIB80211_CRYPT_WEP=m +CONFIG_LIB80211_CRYPT_CCMP=m +CONFIG_LIB80211_CRYPT_TKIP=m +# CONFIG_LIB80211_DEBUG is not set +CONFIG_MAC80211=m + +# +# Rate control algorithm selection +# +CONFIG_MAC80211_RC_MINSTREL=y +# CONFIG_MAC80211_RC_DEFAULT_PID is not set +CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y +CONFIG_MAC80211_RC_DEFAULT="minstrel" +CONFIG_MAC80211_MESH=y +CONFIG_MAC80211_LEDS=y +# CONFIG_MAC80211_DEBUGFS is not set +# CONFIG_MAC80211_DEBUG_MENU is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=m +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +CONFIG_FTL=y +CONFIG_NFTL=y +CONFIG_NFTL_RW=y +CONFIG_INFTL=y +CONFIG_RFD_FTL=y +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_STAA=y +CONFIG_MTD_CFI_UTIL=y +CONFIG_MTD_RAM=y +CONFIG_MTD_ROM=y +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_IMPA7 is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_VERIFY_WRITE=y +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_IDS=y +CONFIG_MTD_NAND_S3C2410=y +# CONFIG_MTD_NAND_S3C2410_DEBUG is not set +# CONFIG_MTD_NAND_S3C2410_HWECC is not set +# CONFIG_MTD_NAND_S3C2410_CLKSTOP is not set +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +CONFIG_MTD_NAND_PLATFORM=y +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +CONFIG_MTD_LPDDR=y +CONFIG_MTD_QINFO_PROBE=y + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_NBD=m +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=65536 +# CONFIG_BLK_DEV_XIP is not set +CONFIG_CDROM_PKTCDVD=m +CONFIG_CDROM_PKTCDVD_BUFFERS=8 +# CONFIG_CDROM_PKTCDVD_WCACHE is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +CONFIG_EEPROM_AT24=y +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=m +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_SCSI_PROC_FS is not set + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=m +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +CONFIG_DM9000=y +CONFIG_DM9000_DEBUGLEVEL=4 +# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set +# CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +CONFIG_WLAN_80211=y +CONFIG_LIBERTAS=m +# CONFIG_LIBERTAS_USB is not set +CONFIG_LIBERTAS_SDIO=m +# CONFIG_LIBERTAS_SPI is not set +# CONFIG_LIBERTAS_DEBUG is not set +# CONFIG_LIBERTAS_THINFIRM is not set +# CONFIG_AT76C50X_USB is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_USB_NET_RNDIS_WLAN is not set +# CONFIG_RTL8187 is not set +# CONFIG_MAC80211_HWSIM is not set +# CONFIG_P54_COMMON is not set +# CONFIG_AR9170_USB is not set +CONFIG_HOSTAP=m +CONFIG_HOSTAP_FIRMWARE=y +CONFIG_HOSTAP_FIRMWARE_NVRAM=y +# CONFIG_B43 is not set +# CONFIG_B43LEGACY is not set +CONFIG_ZD1211RW=m +CONFIG_ZD1211RW_DEBUG=y +# CONFIG_RT2X00 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +CONFIG_PPP=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_MPPE=m +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=m +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +CONFIG_INPUT_FF_MEMLESS=y +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +CONFIG_INPUT_EVBUG=m + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_GPIO=y +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_GPIO is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_AD7877 is not set +# CONFIG_TOUCHSCREEN_AD7879_I2C is not set +# CONFIG_TOUCHSCREEN_AD7879_SPI is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +CONFIG_SERIO_RAW=y +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SAMSUNG=y +CONFIG_SERIAL_SAMSUNG_UARTS=3 +CONFIG_SERIAL_SAMSUNG_CONSOLE=y +CONFIG_SERIAL_S3C2440=y +# CONFIG_SERIAL_MAX3100 is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=128 +CONFIG_IPMI_HANDLER=m +# CONFIG_IPMI_PANIC_EVENT is not set +CONFIG_IPMI_DEVICE_INTERFACE=m +CONFIG_IPMI_SI=m +CONFIG_IPMI_WATCHDOG=m +CONFIG_IPMI_POWEROFF=m +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y +CONFIG_I2C_ALGOBIT=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_S3C2410=y +CONFIG_I2C_SIMTEC=y + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_MAX6875 is not set +CONFIG_SENSORS_TSL2550=m +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BITBANG=y +# CONFIG_SPI_GPIO is not set +CONFIG_SPI_S3C24XX=y +# CONFIG_SPI_S3C24XX_GPIO is not set + +# +# SPI Protocol Masters +# +CONFIG_SPI_SPIDEV=y +# CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADCXX is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IBMAEM is not set +# CONFIG_SENSORS_IBMPEX is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +CONFIG_SENSORS_LM75=y +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set +# CONFIG_SENSORS_MAX1111 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3_SPI is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +CONFIG_THERMAL=m +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_S3C2410_WATCHDOG=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +CONFIG_VIDEO_DEV=m +CONFIG_VIDEO_V4L2_COMMON=m +CONFIG_VIDEO_ALLOW_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +CONFIG_DVB_CORE=m +CONFIG_VIDEO_MEDIA=m + +# +# Multimedia drivers +# +# CONFIG_MEDIA_ATTACH is not set +CONFIG_MEDIA_TUNER=m +# CONFIG_MEDIA_TUNER_CUSTOMISE is not set +CONFIG_MEDIA_TUNER_SIMPLE=m +CONFIG_MEDIA_TUNER_TDA8290=m +CONFIG_MEDIA_TUNER_TDA9887=m +CONFIG_MEDIA_TUNER_TEA5761=m +CONFIG_MEDIA_TUNER_TEA5767=m +CONFIG_MEDIA_TUNER_MT20XX=m +CONFIG_MEDIA_TUNER_XC2028=m +CONFIG_MEDIA_TUNER_XC5000=m +CONFIG_MEDIA_TUNER_MC44S803=m +CONFIG_VIDEO_V4L2=m +CONFIG_VIDEO_V4L1=m +CONFIG_VIDEOBUF_GEN=m +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_CPIA2 is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_VIDEO_AU0828 is not set +CONFIG_SOC_CAMERA=m +# CONFIG_SOC_CAMERA_MT9M001 is not set +# CONFIG_SOC_CAMERA_MT9M111 is not set +# CONFIG_SOC_CAMERA_MT9T031 is not set +# CONFIG_SOC_CAMERA_MT9V022 is not set +# CONFIG_SOC_CAMERA_TW9910 is not set +CONFIG_SOC_CAMERA_PLATFORM=m +# CONFIG_SOC_CAMERA_OV772X is not set +# CONFIG_VIDEO_SH_MOBILE_CEU is not set +CONFIG_V4L_USB_DRIVERS=y +# CONFIG_USB_VIDEO_CLASS is not set +CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y +CONFIG_USB_GSPCA=m +# CONFIG_USB_M5602 is not set +# CONFIG_USB_STV06XX is not set +# CONFIG_USB_GSPCA_CONEX is not set +# CONFIG_USB_GSPCA_ETOMS is not set +# CONFIG_USB_GSPCA_FINEPIX is not set +# CONFIG_USB_GSPCA_MARS is not set +# CONFIG_USB_GSPCA_MR97310A is not set +# CONFIG_USB_GSPCA_OV519 is not set +# CONFIG_USB_GSPCA_OV534 is not set +# CONFIG_USB_GSPCA_PAC207 is not set +# CONFIG_USB_GSPCA_PAC7311 is not set +# CONFIG_USB_GSPCA_SONIXB is not set +# CONFIG_USB_GSPCA_SONIXJ is not set +# CONFIG_USB_GSPCA_SPCA500 is not set +# CONFIG_USB_GSPCA_SPCA501 is not set +# CONFIG_USB_GSPCA_SPCA505 is not set +# CONFIG_USB_GSPCA_SPCA506 is not set +# CONFIG_USB_GSPCA_SPCA508 is not set +# CONFIG_USB_GSPCA_SPCA561 is not set +# CONFIG_USB_GSPCA_SQ905 is not set +# CONFIG_USB_GSPCA_SQ905C is not set +# CONFIG_USB_GSPCA_STK014 is not set +# CONFIG_USB_GSPCA_SUNPLUS is not set +# CONFIG_USB_GSPCA_T613 is not set +# CONFIG_USB_GSPCA_TV8532 is not set +# CONFIG_USB_GSPCA_VC032X is not set +CONFIG_USB_GSPCA_ZC3XX=m +# CONFIG_VIDEO_PVRUSB2 is not set +# CONFIG_VIDEO_HDPVR is not set +# CONFIG_VIDEO_EM28XX is not set +# CONFIG_VIDEO_CX231XX is not set +# CONFIG_VIDEO_USBVISION is not set +# CONFIG_USB_VICAM is not set +# CONFIG_USB_IBMCAM is not set +# CONFIG_USB_KONICAWC is not set +# CONFIG_USB_QUICKCAM_MESSENGER is not set +# CONFIG_USB_ET61X251 is not set +# CONFIG_VIDEO_OVCAMCHIP is not set +# CONFIG_USB_OV511 is not set +# CONFIG_USB_SE401 is not set +# CONFIG_USB_SN9C102 is not set +# CONFIG_USB_STV680 is not set +# CONFIG_USB_ZC0301 is not set +# CONFIG_USB_PWC is not set +# CONFIG_USB_PWC_INPUT_EVDEV is not set +# CONFIG_USB_ZR364XX is not set +# CONFIG_USB_STKWEBCAM is not set +# CONFIG_USB_S2255 is not set +CONFIG_RADIO_ADAPTERS=y +# CONFIG_USB_DSBR is not set +# CONFIG_USB_SI470X is not set +# CONFIG_USB_MR800 is not set +# CONFIG_RADIO_TEA5764 is not set +# CONFIG_DVB_DYNAMIC_MINORS is not set +CONFIG_DVB_CAPTURE_DRIVERS=y +# CONFIG_TTPCI_EEPROM is not set + +# +# Supported USB Adapters +# +# CONFIG_DVB_USB is not set +# CONFIG_DVB_SIANO_SMS1XXX is not set + +# +# Supported FlexCopII (B2C2) Adapters +# +# CONFIG_DVB_B2C2_FLEXCOP is not set + +# +# Supported DVB Frontends +# +# CONFIG_DVB_FE_CUSTOMISE is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=y +CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_UVESA is not set +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_S3C2410=y +# CONFIG_FB_S3C2410_DEBUG is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +# CONFIG_LCD_LTV350QV is not set +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_TDO24M is not set +# CONFIG_LCD_VGG2432A4 is not set +CONFIG_LCD_PLATFORM=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_GENERIC is not set +CONFIG_BACKLIGHT_PWM=y + +# +# Display device support +# +CONFIG_DISPLAY_SUPPORT=y + +# +# Display hardware drivers +# + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +# CONFIG_FONT_8x16 is not set +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +CONFIG_FONT_MINI_4x6=y +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_HWDEP=m +CONFIG_SND_RAWMIDI=m +CONFIG_SND_JACK=y +CONFIG_SND_SEQUENCER=m +CONFIG_SND_SEQ_DUMMY=m +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y +CONFIG_SND_SEQUENCER_OSS=y +CONFIG_SND_DYNAMIC_MINORS=y +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +# CONFIG_SND_DRIVERS is not set +# CONFIG_SND_ARM is not set +# CONFIG_SND_SPI is not set +CONFIG_SND_USB=y +CONFIG_SND_USB_AUDIO=m +CONFIG_SND_USB_CAIAQ=m +CONFIG_SND_USB_CAIAQ_INPUT=y +CONFIG_SND_SOC=y +CONFIG_SND_S3C24XX_SOC=y +CONFIG_SND_S3C24XX_SOC_I2S=y +# CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650 is not set +CONFIG_SND_S3C24XX_SOC_S3C24XX_UDA134X=y +CONFIG_SND_SOC_I2C_AND_SPI=y +# CONFIG_SND_SOC_ALL_CODECS is not set +CONFIG_SND_SOC_L3=y +CONFIG_SND_SOC_UDA134X=y +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +CONFIG_HIDRAW=y + +# +# USB Input Devices +# +CONFIG_USB_HID=y +CONFIG_HID_PID=y +CONFIG_USB_HIDDEV=y + +# +# Special HID drivers +# +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set +CONFIG_HID_EZKEY=y +CONFIG_HID_KYE=y +CONFIG_HID_GYRATION=y +CONFIG_HID_KENSINGTON=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_NTRIG=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +# CONFIG_GREENASIA_FF is not set +CONFIG_HID_TOPSEED=y +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set + +# +# USB Device Class drivers +# +CONFIG_USB_ACM=m +# CONFIG_USB_PRINTER is not set +CONFIG_USB_WDM=m +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +CONFIG_USB_STORAGE_DATAFAB=m +# CONFIG_USB_STORAGE_FREECOM is not set +CONFIG_USB_STORAGE_ISD200=m +CONFIG_USB_STORAGE_USBAT=m +CONFIG_USB_STORAGE_SDDR09=m +CONFIG_USB_STORAGE_SDDR55=m +CONFIG_USB_STORAGE_JUMPSHOT=m +CONFIG_USB_STORAGE_ALAUDA=m +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +CONFIG_USB_LIBUSUAL=y + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +CONFIG_USB_SERIAL=m +# CONFIG_USB_EZUSB is not set +# CONFIG_USB_SERIAL_GENERIC is not set +# CONFIG_USB_SERIAL_AIRCABLE is not set +# CONFIG_USB_SERIAL_ARK3116 is not set +# CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_CH341 is not set +# CONFIG_USB_SERIAL_WHITEHEAT is not set +# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +CONFIG_USB_SERIAL_CP210X=m +# CONFIG_USB_SERIAL_CYPRESS_M8 is not set +# CONFIG_USB_SERIAL_EMPEG is not set +CONFIG_USB_SERIAL_FTDI_SIO=m +# CONFIG_USB_SERIAL_FUNSOFT is not set +# CONFIG_USB_SERIAL_VISOR is not set +# CONFIG_USB_SERIAL_IPAQ is not set +# CONFIG_USB_SERIAL_IR is not set +# CONFIG_USB_SERIAL_EDGEPORT is not set +# CONFIG_USB_SERIAL_EDGEPORT_TI is not set +# CONFIG_USB_SERIAL_GARMIN is not set +# CONFIG_USB_SERIAL_IPW is not set +# CONFIG_USB_SERIAL_IUU is not set +# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set +# CONFIG_USB_SERIAL_KEYSPAN is not set +# CONFIG_USB_SERIAL_KLSI is not set +# CONFIG_USB_SERIAL_KOBIL_SCT is not set +# CONFIG_USB_SERIAL_MCT_U232 is not set +# CONFIG_USB_SERIAL_MOS7720 is not set +# CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_MOTOROLA is not set +# CONFIG_USB_SERIAL_NAVMAN is not set +# CONFIG_USB_SERIAL_PL2303 is not set +# CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_QUALCOMM is not set +CONFIG_USB_SERIAL_SPCP8X5=m +# CONFIG_USB_SERIAL_HP4X is not set +# CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_SIEMENS_MPI is not set +# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set +# CONFIG_USB_SERIAL_SYMBOL is not set +# CONFIG_USB_SERIAL_TI is not set +# CONFIG_USB_SERIAL_CYBERJACK is not set +# CONFIG_USB_SERIAL_XIRCOM is not set +# CONFIG_USB_SERIAL_OPTION is not set +# CONFIG_USB_SERIAL_OMNINET is not set +# CONFIG_USB_SERIAL_OPTICON is not set +# CONFIG_USB_SERIAL_DEBUG is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +# CONFIG_USB_GADGET_DEBUG_FS is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set +CONFIG_USB_GADGET_S3C2410=y +CONFIG_USB_S3C2410=y +# CONFIG_USB_S3C2410_DEBUG is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +CONFIG_USB_ZERO=m +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +CONFIG_USB_GADGETFS=m +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +CONFIG_USB_CDC_COMPOSITE=m + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +CONFIG_SDIO_UART=y +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SPI=y +CONFIG_MMC_S3C=y +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +CONFIG_LEDS_S3C24XX=y +# CONFIG_LEDS_PCA9532 is not set +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_GPIO_PLATFORM=y +# CONFIG_LEDS_LP5521 is not set +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_DAC124S085 is not set +# CONFIG_LEDS_PWM is not set +# CONFIG_LEDS_BD2802 is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_BACKLIGHT=y +CONFIG_LEDS_TRIGGER_GPIO=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y + +# +# iptables trigger is under Netfilter config (LED target) +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +CONFIG_RTC_INTF_DEV_UIE_EMUL=y +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_S3C=y +CONFIG_DMADEVICES=y + +# +# DMA Devices +# +# CONFIG_AUXDISPLAY is not set +# CONFIG_REGULATOR is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=m +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_AUTOFS_FS=y +CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set +CONFIG_GENERIC_ACL=y + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_CONFIGFS_FS=m +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=y +# CONFIG_ROMFS_BACKED_BY_BLOCK is not set +# CONFIG_ROMFS_BACKED_BY_MTD is not set +CONFIG_ROMFS_BACKED_BY_BOTH=y +CONFIG_ROMFS_ON_BLOCK=y +CONFIG_ROMFS_ON_MTD=y +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +CONFIG_LDM_PARTITION=y +# CONFIG_LDM_DEBUG is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +CONFIG_EFI_PARTITION=y +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="cp437" +CONFIG_NLS_CODEPAGE_437=m +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=m +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +# CONFIG_SCHED_DEBUG is not set +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +CONFIG_DEBUG_USER=y +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set +CONFIG_DEBUG_S3C_UART=0 + +# +# Security options +# +CONFIG_KEYS=y +# CONFIG_KEYS_DEBUG_PROC_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +CONFIG_SECURITY_FILE_CAPABILITIES=y +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_FIPS=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y +CONFIG_CRYPTO_CRYPTD=m +CONFIG_CRYPTO_AUTHENC=m +CONFIG_CRYPTO_TEST=m + +# +# Authenticated Encryption with Associated Data +# +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_GCM=m +CONFIG_CRYPTO_SEQIV=m + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_CTR=m +CONFIG_CRYPTO_CTS=m +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_XTS=m + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=m + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=y +CONFIG_CRYPTO_RMD128=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_RMD256=m +CONFIG_CRYPTO_RMD320=m +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_WP512=m + +# +# Ciphers +# +CONFIG_CRYPTO_AES=y +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=y +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_SALSA20=m +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_ZLIB=m +CONFIG_CRYPTO_LZO=m + +# +# Random Number Generation +# +CONFIG_CRYPTO_ANSI_CPRNG=m +CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=m +CONFIG_CRC16=m +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=y +CONFIG_CRC32=y +CONFIG_CRC7=y +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=m +CONFIG_LZO_DECOMPRESS=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y -- cgit v1.1 From 799ca065213ab5df92d787c36c99cb4222f4e717 Mon Sep 17 00:00:00 2001 From: Ben Dooks <ben-linux@fluff.org> Date: Mon, 15 Jun 2009 22:07:48 +0100 Subject: [ARM] MINI2440: Cleanup duplicated header includes Remove duplicate mach headers for gpio. Signed-off-by: Ben Dooks <ben-linux@fluff.org> --- arch/arm/mach-s3c2440/mach-mini2440.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c index eb4b245..6a5bc30 100644 --- a/arch/arm/mach-s3c2440/mach-mini2440.c +++ b/arch/arm/mach-s3c2440/mach-mini2440.c @@ -49,9 +49,6 @@ #include <plat/udc.h> #include <plat/regs-serial.h> -#include <mach/regs-gpio.h> -#include <mach/regs-mem.h> -#include <mach/regs-lcd.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> -- cgit v1.1 From 66765fe1b62e4c0eee3b7e3aa1eb34e5428f52ec Mon Sep 17 00:00:00 2001 From: Paul Mundt <lethal@linux-sh.org> Date: Tue, 16 Jun 2009 06:26:08 +0900 Subject: sh: pci: SH7786 PCI ops. This adds in preliminary support for the SH7786 PCIe module PCI ops, and the corresponding module definitions. Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/drivers/pci/Makefile | 1 + arch/sh/drivers/pci/ops-sh7786.c | 134 +++++++++ arch/sh/drivers/pci/pcie-sh7786.h | 589 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 724 insertions(+) create mode 100644 arch/sh/drivers/pci/ops-sh7786.c create mode 100644 arch/sh/drivers/pci/pcie-sh7786.h (limited to 'arch') diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile index d2ffc47..d6303d0 100644 --- a/arch/sh/drivers/pci/Makefile +++ b/arch/sh/drivers/pci/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7751R) += pci-sh7751.o ops-sh4.o obj-$(CONFIG_CPU_SUBTYPE_SH7763) += pci-sh7780.o ops-sh4.o obj-$(CONFIG_CPU_SUBTYPE_SH7780) += pci-sh7780.o ops-sh4.o obj-$(CONFIG_CPU_SUBTYPE_SH7785) += pci-sh7780.o ops-sh4.o +obj-$(CONFIG_CPU_SUBTYPE_SH7786) += ops-sh7786.o obj-$(CONFIG_CPU_SH5) += pci-sh5.o ops-sh5.o obj-$(CONFIG_SH_DREAMCAST) += ops-dreamcast.o fixups-dreamcast.o \ diff --git a/arch/sh/drivers/pci/ops-sh7786.c b/arch/sh/drivers/pci/ops-sh7786.c new file mode 100644 index 0000000..48f594b9 --- /dev/null +++ b/arch/sh/drivers/pci/ops-sh7786.c @@ -0,0 +1,134 @@ +/* + * Generic SH7786 PCI-Express operations. + * + * Copyright (C) 2009 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License v2. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/io.h> +#include <linux/spinlock.h> +#include "pcie-sh7786.h" + +enum { + PCI_ACCESS_READ, + PCI_ACCESS_WRITE, +}; + +static DEFINE_SPINLOCK(sh7786_pcie_lock); + +static int sh7786_pcie_config_access(unsigned char access_type, + struct pci_bus *bus, unsigned int devfn, int where, u32 *data) +{ + struct pci_channel *chan = bus->sysdata; + int dev, func; + + dev = PCI_SLOT(devfn); + func = PCI_FUNC(devfn); + + if (bus->number > 255 || dev > 31 || func > 7) + return PCIBIOS_FUNC_NOT_SUPPORTED; + if (devfn) + return PCIBIOS_DEVICE_NOT_FOUND; + + /* Set the PIO address */ + pci_write_reg(chan, (bus->number << 24) | (dev << 19) | + (func << 16) | (where & ~3), SH4A_PCIEPAR); + + /* Enable the configuration access */ + pci_write_reg(chan, (1 << 31), SH4A_PCIEPCTLR); + + if (access_type == PCI_ACCESS_READ) + *data = pci_read_reg(chan, SH4A_PCIEPDR); + else + pci_write_reg(chan, *data, SH4A_PCIEPDR); + + /* Check for master and target aborts */ + if (pci_read_reg(chan, SH4A_PCIEPCICONF1) & ((1 << 29) | (1 << 28))) + return PCIBIOS_DEVICE_NOT_FOUND; + + return PCIBIOS_SUCCESSFUL; +} + +static int sh7786_pcie_read(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 *val) +{ + unsigned long flags; + int ret; + u32 data; + + if ((size == 2) && (where & 1)) + return PCIBIOS_BAD_REGISTER_NUMBER; + else if ((size == 4) && (where & 3)) + return PCIBIOS_BAD_REGISTER_NUMBER; + + spin_lock_irqsave(&sh7786_pcie_lock, flags); + ret = sh7786_pcie_config_access(PCI_ACCESS_READ, bus, + devfn, where, &data); + if (ret != PCIBIOS_SUCCESSFUL) + goto out; + + if (size == 1) + *val = (data >> ((where & 3) << 3)) & 0xff; + else if (size == 2) + *val = (data >> ((where & 2) << 3)) & 0xffff; + else + *val = data; + + dev_dbg(&bus->dev, "pcie-config-read: bus=%3d devfn=0x%04x " + "where=0x%04x size=%d val=0x%08lx\n", bus->number, + devfn, where, size, (unsigned long)*val); + +out: + spin_unlock_irqrestore(&sh7786_pcie_lock, flags); + return ret; +} + +static int sh7786_pcie_write(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 val) +{ + unsigned long flags; + int shift, ret; + u32 data; + + if ((size == 2) && (where & 1)) + return PCIBIOS_BAD_REGISTER_NUMBER; + else if ((size == 4) && (where & 3)) + return PCIBIOS_BAD_REGISTER_NUMBER; + + spin_lock_irqsave(&sh7786_pcie_lock, flags); + ret = sh7786_pcie_config_access(PCI_ACCESS_READ, bus, + devfn, where, &data); + if (ret != PCIBIOS_SUCCESSFUL) + goto out; + + dev_dbg(&bus->dev, "pcie-config-write: bus=%3d devfn=0x%04x " + "where=0x%04x size=%d val=%08lx\n", bus->number, + devfn, where, size, (unsigned long)val); + + if (size == 1) { + shift = (where & 3) << 3; + data &= ~(0xff << shift); + data |= ((val & 0xff) << shift); + } else if (size == 2) { + shift = (where & 2) << 3; + data &= ~(0xffff << shift); + data |= ((val & 0xffff) << shift); + } else + data = val; + + ret = sh7786_pcie_config_access(PCI_ACCESS_WRITE, bus, + devfn, where, &data); +out: + spin_unlock_irqrestore(&sh7786_pcie_lock, flags); + return ret; +} + +struct pci_ops sh7786_pci_ops = { + .read = sh7786_pcie_read, + .write = sh7786_pcie_write, +}; diff --git a/arch/sh/drivers/pci/pcie-sh7786.h b/arch/sh/drivers/pci/pcie-sh7786.h new file mode 100644 index 0000000..c655290 --- /dev/null +++ b/arch/sh/drivers/pci/pcie-sh7786.h @@ -0,0 +1,589 @@ +/* + * SH7786 PCI-Express controller definitions. + * + * Copyright (C) 2008, 2009 Renesas Technology Corp. + * All rights reserved. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __PCI_SH7786_H +#define __PCI_SH7786_H + +/* PCIe bus-0(x4) on SH7786 */ // Rev1.171 +#define SH4A_PCIE_SPW_BASE 0xFE000000 /* spw config address for controller 0 */ +#define SH4A_PCIE_SPW_BASE1 0xFE200000 /* spw config address for controller 1 (Rev1.14)*/ +#define SH4A_PCIE_SPW_BASE2 0xFCC00000 /* spw config address for controller 2 (Rev1.171)*/ +#define SH4A_PCIE_SPW_BASE_LEN 0x00080000 + +#define SH4A_PCI_CNFG_BASE 0xFE040000 /* pci config address for controller 0 */ +#define SH4A_PCI_CNFG_BASE1 0xFE240000 /* pci config address for controller 1 (Rev1.14)*/ +#define SH4A_PCI_CNFG_BASE2 0xFCC40000 /* pci config address for controller 2 (Rev1.171)*/ +#define SH4A_PCI_CNFG_BASE_LEN 0x00040000 + +#define SH4A_PCIPIO_ADDR_OFFSET 0x000001c0 /* offset to pci config_address */ +#define SH4A_PCIPIO_DATA_OFFSET 0x00000220 /* offset to pci config_data */ + +/* + * for PEX8111(Max Payload Size=128B,PCIIO_SIZE=64K), + * for other(Max Payload Size=4096B,PCIIO_SIZE=8M) + */ + +/* PCI0-0: PCI I/O space */ +#define SH4A_PCIIO_BASE 0xFD000000 /* PCI I/O for controller 0 */ +#define SH4A_PCIIO_BASE1 0xFD800000 /* PCI I/O for controller 1 (Rev1.14)*/ +#define SH4A_PCIIO_BASE2 0xFC800000 /* PCI I/O for controller 2 (Rev1.171)*/ + +#define SH4A_PCIIO_SIZE64 0x00010000 /* PLX allows only 64K */ +#define SH4A_PCIIO_SIZE 0x00800000 /* 8M */ +#define SH4A_PCIIO_SIZE2 0x00400000 /* 4M (Rev1.171)*/ + +/* PCI0-1: PCI memory space 29-bit address */ +#define SH4A_PCIMEM_BASE 0x10000000 +#define SH4A_PCIMEM_SIZE 0x04000000 /* 64M */ + +/* PCI0-2: PCI memory space 32-bit address */ +#define SH4A_PCIMEM_BASEA 0xC0000000 /* for controller 0 */ +#define SH4A_PCIMEM_BASEA1 0xA0000000 /* for controller 1 (Rev1.14)*/ +#define SH4A_PCIMEM_BASEA2 0x80000000 /* for controller 2 (Rev1.171)*/ +#define SH4A_PCIMEM_SIZEA 0x20000000 /* 512M */ + +/* PCI0: PCI memory target transfer 32-bit address translation value(Rev1.11T)*/ +#define SH4A_PCIBMSTR_TRANSLATION 0x20000000 + +#define SH4A_PCI_DEVICE_ID 0x0002 +#define SH4A_PCI_VENDOR_ID 0x1912 + +// PCI compatible 000-03f +#define PCI_CMD 0x004 +#define PCI_RID 0x008 +#define PCI_IBAR 0x010 +#define PCI_MBAR0 0x014 +#define PCI_MBAR1 0x018 + +/* PCI power management/MSI/capablity 040-0ff */ +/* PCIE extended 100-fff */ + +/* SH7786 device identification */ // Rev1.171 +#define SH4A_PVR (0xFF000030) +#define SH4A_PVR_SHX3 (0x10400000) +#define SH4A_PRR (0xFF000044) +#define SH4A_PRR_SH7786 (0x00000400) // Rev1.171 + +/* SPVCR0 */ +#define SH4A_PCIEVCR0 (0x000000) /* R - 0x0000 0000 32 */ +#define BITS_TOP_MB (24) +#define MASK_TOP_MB (0xff<<BITS_TOP_MB) +#define BITS_BOT_MB (16) +#define MASK_BOT_MB (0xff<<BITS_BOT_MB) +#define BITS_VC_ID (0) +#define MASK_VC_ID (0xffff<<BITS_VC_ID) + +/* SPVCR1 */ +#define SH4A_PCIEVCR1 (0x000004) /* R - 0x0000 0000 32*/ +#define BITS_BADOPC (5) /* 5 BADOPC 0 R/W */ +#define MASK_BADOPC (1<<BITS_BADOPC) +#define BITS_BADDEST (4) /*4 BADDEST 0 R/W */ +#define MASK_BADDEST (1<<BITS_BADDEST) +#define BITS_UNSOLRESP (3) /* 3 UNSOLRESP 0 R/W */ +#define MASK_UNSOLRESP (1<<BITS_UNSOLRESP) +#define BITS_ERRSNT (1) /* 1 ERRSNT 0 */ +#define MASK_ERRSNT (1<<BITS_ERRSNT) +#define BITS_ERRRCV (0) /* 0 ERRRCV 0 */ +#define MASK_ERRRCV (1<<BITS_ERRRCV) + +/* PCIEECR */ +#define SH4A_PCIEECR (0x000008) /* R/W - 0x0000 0000 32 */ +#define BITS_ENBL (0) /* 0 ENBL 0 R/W */ +#define MASK_ENBL (1<<BITS_ENBL) + +/* PCIEPAR */ +#define SH4A_PCIEPAR (0x000010) /* R/W - 0x0000 0000 32 */ +#define BITS_BN (24) +#define MASK_BN (0xff<<BITS_BN) +#define BITS_DN (19) +#define MASK_DN (0x1f<<BITS_DN) +#define BITS_FN (16) +#define MASK_FN (0x7<<BITS_FN) +#define BITS_EREGNO (8) +#define MASK_EREGNO (0xff<<BITS_EREGNO) +#define BITS_REGNO (2) +#define MASK_REGNO (0x3f<<BITS_REGNO) + +/* PCIEPCTLR */ +#define SH4A_PCIEPCTLR (0x000018) /* R/W - 0x0000 0000 32 */ +#define BITS_CCIE (31) /* 31 CCIE */ +#define MASK_CCIE (1<<BITS_CCIE) +#define BITS_TYPE (8) +#define MASK_TYPE (1<<BITS_TYPE) +#define BITS_C_VC (0) +#define MASK_C_VC (1<<BITS_C_VC) + +/* PCIEPDR */ +#define SH4A_PCIEPDR (0x000020) /* R/W - 0x0000 0000 32 */ +#define BITS_PDR (0) +#define MASK_PDR (0xffffffff<<BITS_PDR) + +/* PCIEMSGALR */ +#define SH4A_PCIEMSGALR (0x000030) /* R/W - 0x0000 0000 32 */ +#define BITS_MSGADRL (0) +#define MASK_MSGADRL (0xffffffff<<BITS_MSGADRL) + +/* PCIEMSGAHR */ +#define SH4A_PCIEMSGAHR (0x000034) /* R/W - 0x0000 0000 32 */ +#define BITS_MSGADRH (0) +#define MASK_MSGADRH (0xffffffff<<BITS_MSGADRH) + +/* PCIEMSGCTLR */ +#define SH4A_PCIEMSGCTLR (0x000038) /* R/W - 0x0000 0000 32 */ +#define BITS_MSGIE (31) +#define MASK_MSGIE (1<<BITS_MSGIE) +#define BITS_MROUTE (16) +#define MASK_MROUTE (0x7<<BITS_MROUTE) +#define BITS_MCODE (8) +#define MASK_MCODE (0xff<<BITS_MCODE) +#define BITS_M_VC (0) +#define MASK_M_VC (1<<BITS_M_VC) + +/* PCIEMSG */ +#define SH4A_PCIEMSG (0x000040) /* W - - 32 */ +#define BITS_MDATA (0) +#define MASK_MDATA (0xffffffff<<BITS_MDATA) + +/* PCIEPHYCTLR */ +#define SH4A_PCIEPHYCTLR (0x010000) /* R/W - 0x0000 0000 32 */ +#define BITS_CKE (0) +#define MASK_CKE (1<<BITS_CKE) + +/* PCIERMSGIER */ +#define SH4A_PCIERMSGIER (0x004040) /* R/W - 0x0000 0000 32 */ + +/* PCIEPHYADRR */ +#define SH4A_PCIEPHYADRR (0x010004) /* R/W - 0x0000 0000 32 */ +#define BITS_ACK (24) // Rev1.171 +#define MASK_ACK (1<<BITS_ACK) // Rev1.171 +#define BITS_CMD (16) // Rev1.171 +#define MASK_CMD (0x03<<BITS_CMD) // Rev1.171 +#define BITS_LANE (8) +#define MASK_LANE (0x0f<<BITS_LANE) +#define BITS_ADR (0) +#define MASK_ADR (0xff<<BITS_ADR) + +/* PCIEPHYDINR */ // Rev1.171 start. +#define SH4A_PCIEPHYDINR (0x010008) /* R/W - 0x0000 0000 32 */ + +/* PCIEPHYDOUTR */ +#define SH4A_PCIEPHYDOUTR (0x01000C) /* R/W - 0x0000 0000 32 */ + +/* PCIEPHYSR */ +#define SH4A_PCIEPHYSR (0x010010) /* R/W - 0x0000 0000 32 */ // Rev1.171 end. + +/* PCIEPHYDATAR */ +#define SH4A_PCIEPHYDATAR (0x00008) /* R/W - 0xxxxx xxxx 32 */ +#define BITS_DATA (0) +#define MASK_DATA (0xffffffff<<BITS_DATA) + +/* PCIETCTLR */ +#define SH4A_PCIETCTLR (0x020000) /* R/W R/W 0x0000 0000 32 */ +#define BITS_CFINT (0) +#define MASK_CFINT (1<<BITS_CFINT) + +/* PCIETSTR */ +#define SH4A_PCIETSTR (0x020004) /* R/W R/W 0x0000 0000 32 */ + +/* PCIEINTR */ +#define SH4A_PCIEINTR (0x020008) /* R/W R/W 0x0000 0000 32 */ +#define BITS_INT_RX_ERP (31) +#define MASK_INT_RX_ERP (1<<BITS_INT_RX_ERP) +#define BITS_INT_RX_VCX_Posted (30) +#define MASK_INT_RX_VCX_Posted (1<<BITS_INT_RX_VCX_Posted) +#define BITS_INT_RX_VCX_NonPosted (29) +#define MASK_INT_RX_VCX_NonPosted (1<<BITS_INT_RX_VCX_NonPosted) +#define BITS_INT_RX_VCX_CPL (28) +#define MASK_INT_RX_VCX_CPL (1<<BITS_INT_RX_VCX_CPL) +#define BITS_INT_TX_VCX_Posted (26) +#define MASK_INT_TX_VCX_Posted (1<<BITS_INT_TX_VCX_Posted) +#define BITS_INT_TX_VCX_NonPosted (25) +#define MASK_INT_TX_VCX_NonPosted (1<<BITS_INT_TX_VCX_NonPosted) +#define BITS_INT_TX_VCX_CPL (24) +#define MASK_INT_TX_VCX_CPL (1<<BITS_INT_TX_VCX_CPL) +#define BITS_INT_RX_VC0_Posted (22) +#define MASK_INT_RX_VC0_Posted (1<<BITS_INT_RX_VC0_Posted) +#define BITS_INT_RX_VC0_NonPosted (21) +#define MASK_INT_RX_VC0_NonPosted (1<<BITS_INT_RX_VC0_NonPosted) +#define BITS_INT_RX_VC0_CPL (20) +#define MASK_INT_RX_VC0_CPL (1<<BITS_INT_RX_VC0_CPL) +#define BITS_INT_TX_VC0_Posted (18) +#define MASK_INT_TX_VC0_Posted (1<<BITS_INT_TX_VC0_Posted) +#define BITS_INT_TX_VC0_NonPosted (17) +#define MASK_INT_TX_VC0_NonPosted (1<<BITS_INT_TX_VC0_NonPosted) +#define BITS_INT_TX_VC0_CPL (16) +#define MASK_INT_TX_VC0_CPL (1<<BITS_INT_TX_VC0_CPL) +#define BITS_INT_RX_CTRL (15) +#define MASK_INT_RX_CTRL (1<<BITS_INT_RX_CTRL) +#define BITS_INT_TX_CTRL (14) +#define MASK_INT_TX_CTRL (1<<BITS_INT_TX_CTRL) +#define BITS_INTTL (11) +#define MASK_INTTL (1<<BITS_INTTL) +#define BITS_INTDL (10) +#define MASK_INTDL (1<<BITS_INTDL) +#define BITS_INTMAC (9) +#define MASK_INTMAC (1<<BITS_INTMAC) +#define BITS_INTPM (8) +#define MASK_INTPM (1<<BITS_INTPM) + +/* PCIEINTER */ +#define SH4A_PCIEINTER (0x02000C) /* R/W R/W 0x0000 0000 32 */ +#define BITS_INT_RX_ERP (31) +#define MASK_INT_RX_ERP (1<<BITS_INT_RX_ERP) +#define BITS_INT_RX_VCX_Posted (30) +#define MASK_INT_RX_VCX_Posted (1<<BITS_INT_RX_VCX_Posted) +#define BITS_INT_RX_VCX_NonPosted (29) +#define MASK_INT_RX_VCX_NonPosted (1<<BITS_INT_RX_VCX_NonPosted) +#define BITS_INT_RX_VCX_CPL (28) +#define MASK_INT_RX_VCX_CPL (1<<BITS_INT_RX_VCX_CPL) +#define BITS_INT_TX_VCX_Posted (26) +#define MASK_INT_TX_VCX_Posted (1<<BITS_INT_TX_VCX_Posted) +#define BITS_INT_TX_VCX_NonPosted (25) +#define MASK_INT_TX_VCX_NonPosted (1<<BITS_INT_TX_VCX_NonPosted) +#define BITS_INT_TX_VCX_CPL (24) +#define MASK_INT_TX_VCX_CPL (1<<BITS_INT_TX_VCX_CPL) +#define BITS_INT_RX_VC0_Posted (22) +#define MASK_INT_RX_VC0_Posted (1<<BITS_INT_RX_VC0_Posted) +#define BITS_INT_RX_VC0_NonPosted (21) +#define MASK_INT_RX_VC0_NonPosted (1<<BITS_INT_RX_VC0_NonPosted) +#define BITS_INT_RX_VC0_CPL (20) +#define MASK_INT_RX_VC0_CPL (1<<BITS_INT_RX_VC0_CPL) +#define BITS_INT_TX_VC0_Posted (18) +#define MASK_INT_TX_VC0_Posted (1<<BITS_INT_TX_VC0_Posted) +#define BITS_INT_TX_VC0_NonPosted (17) +#define MASK_INT_TX_VC0_NonPosted (1<<BITS_INT_TX_VC0_NonPosted) +#define BITS_INT_TX_VC0_CPL (16) +#define MASK_INT_TX_VC0_CPL (1<<BITS_INT_TX_VC0_CPL) +#define BITS_INT_RX_CTRL (15) +#define MASK_INT_RX_CTRL (1<<BITS_INT_RX_CTRL) +#define BITS_INT_TX_CTRL (14) +#define MASK_INT_TX_CTRL (1<<BITS_INT_TX_CTRL) +#define BITS_INTTL (11) +#define MASK_INTTL (1<<BITS_INTTL) +#define BITS_INTDL (10) +#define MASK_INTDL (1<<BITS_INTDL) +#define BITS_INTMAC (9) +#define MASK_INTMAC (1<<BITS_INTMAC) +#define BITS_INTPM (8) +#define MASK_INTPM (1<<BITS_INTPM) + +/* PCIEAIR */ +#define SH4A_PCIEAIR (SH4A_PCIE_BASE + 0x020010) /* R/W R/W 0xxxxx xxxx 32 */ + +/* PCIECIR */ +#define SH4A_PCIECIR (SH4A_PCIE_BASE) /* R/W R/W 0xxxxx xxxx 32 */ + +/* PCIEERRFR */ // Rev1.18 +#define SH4A_PCIEERRFR (0x020020) /* R/W R/W 0xxxxx xxxx 32 */ // Rev1.18 + // Rev1.18 +/* PCIELAR0 */ +#define SH4A_PCIELAR0 (0x020200) /* R/W R/W 0x0000 0000 32 */ +#define BITS_LARn (20) +#define MASK_LARn (0xfff<<BITS_LARn) + +#define SH4A_PCIE_020204 (0x020204) /* R/W R/W 0x0000 0000 32 */ + +/* PCIELAMR0 */ +#define SH4A_PCIELAMR0 (0x020208) /* R/W R/W 0x0000 0000 32 */ +#define BITS_LAMRn (20) +#define MASK_LAMRn (0x1ff<<BITS_LAMRn) +#define BITS_LAREn (0) +#define MASK_LAREn (0x1<<BITS_LAREn) + +/* PCIECSCR0 */ +#define SH4A_PCIECSCR0 (0x020210) /* R/W R/W 0x0000 0000 32 */ +#define BITS_RANGE (2) +#define MASK_RANGE (0x7<<BITS_RANGE) +#define BITS_SNPMD (0) +#define MASK_SNPMD (0x3<<BITS_SNPMD) + +/* PCIECSAR0 */ +#define SH4A_PCIECSAR0 (0x020214) /* R/W R/W 0x0000 0000 32 */ +#define BITS_CSADR (0) +#define MASK_CSADR (0xffffffff<<BITS_CSADR) + +/* PCIESTCTLR0 */ +#define SH4A_PCIESTCTLR0 (0x020218) /* R/W R/W 0x0000 0000 32 */ +#define BITS_SHPRI (8) +#define MASK_SHPRI (0x0f<<BITS_SHPRI) + +#define SH4A_PCIE_020224 (0x020224) /* R/W R/W 0x0000 0000 32 */ + +#define SH4A_PCIELAR1 (0x020220) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIELAMR1 (0x020228) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIECSCR1 (0x020230) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIECSAR1 (0x020234) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIESTCTLR1 (0x020238) /* R/W R/W 0x0000 0000 32 */ + +#define SH4A_PCIELAR2 (0x020240) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIE_020244 (0x020244) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIELAMR2 (0x020248) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIECSCR2 (0x020250) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIECSAR2 (0x020254) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIESTCTLR2 (0x020258) /* R/W R/W 0x0000 0000 32 */ + +#define SH4A_PCIELAR3 (0x020260) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIE_020264 (0x020264) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIELAMR3 (0x020268) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIECSCR3 (0x020270) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIECSAR3 (0x020274) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIESTCTLR3 (0x020278) /* R/W R/W 0x0000 0000 32 */ + +#define SH4A_PCIELAR4 (0x020280) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIE_020284 (0x020284) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIELAMR4 (0x020288) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIECSCR4 (0x020290) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIECSAR4 (0x020294) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIESTCTLR4 (0x020298) /* R/W R/W 0x0000 0000 32 */ + +#define SH4A_PCIELAR5 (0x0202A0) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIE_0202A4 (0x0202A4) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIELAMR5 (0x0202A8) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIECSCR5 (0x0202B0) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIECSAR5 (0x0202B4) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIESTCTLR5 (0x0202B8) /* R/W R/W 0x0000 0000 32 */ + +/* PCIEPARL0 */ +#define SH4A_PCIEPARL0 (0x020400) /* R/W R/W 0x0000 0000 32 */ +#define BITS_PAL (18) +#define MASK_PAL (0x3fff<<BITS_PAL) + +/* PCIEPARH0 */ +#define SH4A_PCIEPARH0 (0x020404) /* R/W R/W 0x0000 0000 32 */ +#define BITS_PAH (0) +#define MASK_PAH (0xffffffff<<BITS_PAH) + +/* PCIEPAMR0 */ +#define SH4A_PCIEPAMR0 (0x020408) /* R/W R/W 0x0000 0000 32 */ +#define BITS_PAM (18) +#define MASK_PAM (0x3fff<<BITS_PAM) + +/* PCIEPTCTLR0 */ +#define SH4A_PCIEPTCTLR0 (0x02040C) /* R/W R/W 0x0000 0000 32 */ +#define BITS_PARE (31) +#define MASK_PARE (0x1<<BITS_PARE) +#define BITS_TC (20) +#define MASK_TC (0x7<<BITS_TC) +#define BITS_T_VC (16) +#define MASK_T_VC (0x1<<BITS_T_VC) +#define BITS_LOCK (12) +#define MASK_LOCK (0x1<<BITS_LOCK) +#define BITS_SPC (8) +#define MASK_SPC (0x1<<BITS_SPC) + +#define SH4A_PCIEPARL1 (0x020420) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIEPARH1 (0x020424) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIEPAMR1 (0x020428) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIEPTCTLR1 (0x02042C) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIEPARL2 (0x020440) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIEPARH2 (0x020444) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIEPAMR2 (0x020448) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIEPTCTLR2 (0x02044C) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIEPARL3 (0x020460) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIEPARH3 (0x020464) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIEPAMR3 (0x020468) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIEPTCTLR3 (0x02046C) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIEPARL4 (0x020480) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIEPARH4 (0x020484) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIEPAMR4 (0x020488) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIEPTCTLR4 (0x02048C) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIEPARL5 (0x0204A0) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIEPARH5 (0x0204A4) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIEPAMR5 (0x0204A8) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIEPTCTLR5 (0x0204AC) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIEDMAOR (0x021000) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIEDMSAR0 (0x021100) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIEDMSAHR0 (0x021104) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIEDMDAR0 (0x021108) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIEDMDAHR0 (0x02110C) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIEDMBCNTR0 (0x021110) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIEDMSBCNTR0 (0x021114) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIEDMSTRR0 (0x021118) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIEDMCCAR0 (0x02111C) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIEDMCCR0 (0x021120) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIEDMCC2R0 (0x021124) /* R/W R/W 0x0000 0000 - */ +#define SH4A_PCIEDMCCCR0 (0x021128) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIEDMSAR1 (0x021140) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIEDMSAHR1 (0x021144) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIEDMDAR1 (0x021148) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIEDMDAHR1 (0x02114C) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIEDMBCNTR1 (0x021150) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIEDMSBCNTR1 (0x021154) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIEDMSTRR1 (0x021158) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIEDMCCAR1 (0x02115C) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIEDMCCR1 (0x021160) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIEDMCC2R1 (0x021164) /* R/W R/W 0x0000 0000 - */ +#define SH4A_PCIEDMCCCR1 (0x021168) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIEDMSAR2 (0x021180) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIEDMSAHR2 (0x021184) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIEDMDAR2 (0x021188) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIEDMDAHR2 (0x02118C) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIEDMBCNTR2 (0x021190) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIEDMSBCNTR2 (0x021194) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIEDMSTRR2 (0x021198) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIEDMCCAR2 (0x02119C) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIEDMCCR2 (0x0211A0) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIEDMCC2R2 (0x0211A4) /* R/W R/W 0x0000 0000 - */ +#define SH4A_PCIEDMCCCR2 (0x0211A8) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIEDMSAR3 (0x0211C0) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIEDMSAHR3 (0x0211C4) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIEDMDAR3 (0x0211C8) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIEDMDAHR3 (0x0211CC) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIEDMBCNTR3 (0x0211D0) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIEDMSBCNTR3 (0x0211D4) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIEDMSTRR3 (0x0211D8) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIEDMCCAR3 (0x0211DC) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIEDMCCR3 (0x0211E0) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIEDMCC2R3 (0x0211E4) /* R/W R/W 0x0000 0000 - */ +#define SH4A_PCIEDMCCCR3 (0x0211E8) /* R/W R/W 0x0000 0000 32 */ +#define SH4A_PCIEPCICONF0 (0x040000) /* R R - 8/16/32 */ +#define SH4A_PCIEPCICONF1 (0x040004) /* R/W R/W 0x0008 0000 8/16/32 */ +#define SH4A_PCIEPCICONF2 (0x040008) /* R/W R/W 0xFF00 0000 8/16/32 */ +#define SH4A_PCIEPCICONF3 (0x04000C) /* R/W R/W 0x0000 0000 8/16/32 */ +#define SH4A_PCIEPCICONF4 (0x040010) /* - R/W - 8/16/32 */ +#define SH4A_PCIEPCICONF5 (0x040014) /* - R/W - 8/16/32 */ +#define SH4A_PCIEPCICONF6 (0x040018) /* - R/W - 8/16/32 */ +#define SH4A_PCIEPCICONF7 (0x04001C) /* - R/W - 8/16/32 */ +#define SH4A_PCIEPCICONF8 (0x040020) /* - R/W - 8/16/32 */ +#define SH4A_PCIEPCICONF9 (0x040024) /* - R/W - 8/16/32 */ +#define SH4A_PCIEPCICONF10 (0x040028) /* R/W R/W 0x0000 0000 8/16/32 */ +#define SH4A_PCIEPCICONF11 (0x04002C) /* R/W R/W 0x0000 0000 8/16/32 */ +#define SH4A_PCIEPCICONF12 (0x040030) /* R/W R/W 0x0000 0000 8/16/32 */ +#define SH4A_PCIEPCICONF13 (0x040034) /* R/W R/W 0x0000 0040 8/16/32 */ +#define SH4A_PCIEPCICONF14 (0x040038) /* R/W R/W 0x0000 0000 8/16/32 */ +#define SH4A_PCIEPCICONF15 (0x04003C) /* R/W R/W 0x0000 00FF 8/16/32 */ +#define SH4A_PCIEPMCAP0 (0x040040) /* R/W R 0x0003 5001 8/16/32 */ +#define SH4A_PCIEPMCAP1 (0x040044) /* R/W R/W 0x0000 0000 8/16/32 */ +#define SH4A_PCIEMSICAP0 (0x040050) /* R/W R/W 0x0180 7005 8/16/32 */ +#define SH4A_PCIEMSICAP1 (0x040054) /* R/W R/W 0x0000 0000 8/16/32 */ +#define SH4A_PCIEMSICAP2 (0x040058) /* R/W R/W 0x0000 0000 8/16/32 */ +#define SH4A_PCIEMSICAP3 (0x04005C) /* R/W R/W 0x0000 0000 8/16/32 */ +#define SH4A_PCIEMSICAP4 (0x040060) /* R/W R/W 0x0000 0000 8/16/32 */ +#define SH4A_PCIEMSICAP5 (0x040064) /* R/W R/W 0x0000 0000 8/16/32 */ +#define SH4A_PCIEEXPCAP0 (0x040070) /* R/W R/W 0x0001 0010 8/16/32 */ +#define SH4A_PCIEEXPCAP1 (0x040074) /* R/W R 0x0000 0005 8/16/32 */ +#define SH4A_PCIEEXPCAP2 (0x040078) /* R/W R/W 0x0000 0801 8/16/32 */ +#define SH4A_PCIEEXPCAP3 (0x04007C) /* R/W R 0x0003 F421 8/16/32 */ +#define SH4A_PCIEEXPCAP4 (0x040080) /* R/W R/W 0x0041 0000 8/16/32 */ +#define SH4A_PCIEEXPCAP5 (0x040084) /* R/W R/W 0x0000 0000 8/16/32 */ +#define SH4A_PCIEEXPCAP6 (0x040088) /* R/W R/W 0x0000 03C0 8/16/32 */ +#define SH4A_PCIEEXPCAP7 (0x04008C) /* R/W R/W 0x0000 0000 8/16/32 */ +#define SH4A_PCIEEXPCAP8 (0x040090) /* R/W R/W 0x0000 0000 8/16/32 */ +#define SH4A_PCIEVCCAP0 (0x040100) /* R/W R 0x1B01 0002 8/16/32 */ +#define SH4A_PCIEVCCAP1 (0x040104) /* R R 0x0000 0001 8/16/32 */ +#define SH4A_PCIEVCCAP2 (0x040108) /* R R 0x0000 0000 8/16/32 */ +#define SH4A_PCIEVCCAP3 (0x04010C) /* R R/W 0x0000 0000 8/16/32 */ +#define SH4A_PCIEVCCAP4 (0x040110) /* R/W R/W 0x0000 0000 8/16/32 */ +#define SH4A_PCIEVCCAP5 (0x040114) /* R/W R/W 0x8000 00FF 8/16/32 */ +#define SH4A_PCIEVCCAP6 (0x040118) /* R/W R 0x0002 0000 8/16/32 */ +#define SH4A_PCIEVCCAP7 (0x04011C) /* R/W R/W 0x0000 0000 8/16/32 */ +#define SH4A_PCIEVCCAP8 (0x040120) /* R/W R/W 0x0000 0000 8/16/32 */ +#define SH4A_PCIEVCCAP9 (0x040124) /* R/W R 0x0002 0000 8/16/32 */ +#define SH4A_PCIENUMCAP0 (0x0001B0) /* RW R 0x0001 0003 8/16/32 */ +#define SH4A_PCIENUMCAP1 (0x0001B4) /* R R 0x0000 0000 8/16/32 */ +#define SH4A_PCIENUMCAP2 (0x0001B8) /* R R 0x0000 0000 8/16/32 */ +#define SH4A_PCIEIDSETR0 (0x041000) /* R/W R 0x0000 FFFF 16/32 */ +#define SH4A_PCIEIDSETR1 (0x041004) /* R/W R 0xFF00 0000 16/32 */ +#define SH4A_PCIEBAR0SETR (0x041008) /* R/W R 0x0000 0000 16/32 */ +#define SH4A_PCIEBAR1SETR (0x04100C) /* R/W R 0x0000 0000 16/32 */ +#define SH4A_PCIEBAR2SETR (0x041010) /* R/W R 0x0000 0000 16/32 */ +#define SH4A_PCIEBAR3SETR (0x041014) /* R/W R 0x0000 0000 16/32 */ +#define SH4A_PCIEBAR4SETR (0x041018) /* R/W R 0x0000 0000 16/32 */ +#define SH4A_PCIEBAR5SETR (0x04101C) /* R/W R 0x0000 0000 16/32 */ +#define SH4A_PCIECISSETR (0x041020) /* R/W R 0x0000 0000 16/32 */ +#define SH4A_PCIEIDSETR2 (0x041024) /* R/W R 0x0000 0000 16/32 */ +#define SH4A_PCIEEROMSETR (0x041028) /* R/W R 0x0000 0000 16/32 */ +#define SH4A_PCIEDSERSETR0 (0x04102C) /* R/W R 0x0000 0000 16/32 */ +#define SH4A_PCIEDSERSETR1 (0x041030) /* R/W R 0x0000 0000 16/32 */ +#define SH4A_PCIECTLR (0x041040) /* R/W R 0x0000 0000 16/32 */ +#define SH4A_PCIETLSR (0x041044) /* R/W1C R 0x0000 0000 16/32 */ +#define SH4A_PCIETLCTLR (0x041048) /* R/W R 0x0000 0000 16/32 */ +#define SH4A_PCIEDLSR (0x04104C) /* R/W1C R 0x4003 0000 16/32 */ +#define SH4A_PCIEDLCTLR (0x041050) /* R R 0x0000 0000 16/32 */ +#define SH4A_PCIEMACSR (0x041054) /* R/W1C R 0x0041 0000 16/32 */ +#define SH4A_PCIEMACCTLR (0x041058) /* R/W R 0x0000 0000 16/32 */ +#define PCIEMACCTLR_SCR_DIS (1 << 27) /* scramble disable */ +#define SH4A_PCIEPMSTR (0x04105C) /* R/W1C R 0x0000 0000 16/32 */ +#define SH4A_PCIEPMCTLR (0x041060) /* R/W R 0x0000 0000 16/32 */ +#define SH4A_PCIETLINTENR (0x041064) /* R/W R 0x0000 0000 16/32 */ +#define SH4A_PCIEDLINTENR (0x041068) /* R/W R 0x0000 0000 16/32 */ +#define PCIEDLINTENR_DLL_ACT_ENABLE (1 << 31) /* DL active irq */ +#define SH4A_PCIEMACINTENR (0x04106C) /* R/W R 0x0000 0000 16/32 */ +#define SH4A_PCIEPMINTENR (0x041070) /* R/W R 0x0000 0000 16/32 */ +#define SH4A_PCIETXDCTLR (0x044000) /* R/W - H'00000000_00000000 32/64 */ +#define SH4A_PCIETXCTLR (0x044020) /* R/W - H'00000000_00000000 32/64 */ +#define SH4A_PCIETXSR (0x044028) /* R - H'00000000_00000000 32/64 */ +#define SH4A_PCIETXVC0DCTLR (0x044100) /* R/W - H'00000000_00000000 32/64 */ +#define SH4A_PCIETXVC0SR (0x044108) /* R/W - H'00888000_00000000 32/64 */ +#define SH4A_PCIEVC0PDTXR (0x044110) /* W - H'00000000_00000000 32/64 */ +#define SH4A_PCIEVC0PHTXR (0x044118) /* W - H'00000000_00000000 32/64 */ +#define SH4A_PCIEVC0NPDTXR (0x044120) /* W - H'00000000_00000000 32/64 */ +#define SH4A_PCIEVC0NPHTXR (0x044128) /* W - H'00000000_00000000 32/64 */ +#define SH4A_PCIEVC0CDTXR (0x044130) /* W - H'00000000_00000000 32/64 */ +#define SH4A_PCIEVC0CHTXR (0x044138) /* W - H'00000000_00000000 32/64 */ +#define SH4A_PCIETXVCXDCTLR (0x044200) /* R/W - H'00000000_00000000 32/64 */ +#define SH4A_PCIETXVCXSR (0x044208) /* R/W - H'00000000_00000000 32/64 */ +#define SH4A_PCIEVCXPDTXR (0x044210) /* W - H'00000000_00000000 32/64 */ +#define SH4A_PCIEVCXPHTXR (0x044218) /* W - H'00000000_00000000 32/64 */ +#define SH4A_PCIEVCXNPDTXR (0x044220) /* W - H'00000000_00000000 32/64 */ +#define SH4A_PCIEVCXNPHTXR (0x044228) /* W - H'00000000_00000000 32/64 */ +#define SH4A_PCIEVCXCDTXR (0x044230) /* W - H'00000000_00000000 32/64 */ +#define SH4A_PCIEVCXCHTXR (0x044238) /* W - H'00000000_00000000 32/64 */ +#define SH4A_PCIERDCTLR (0x046000) /* RW - H'00000000_00000000 32/64 */ +#define SH4A_PCIEERPCTLR (0x046008) /* RW - H'00000000_00000000 32/64 */ +#define SH4A_PCIEERPHR (0x046010) /* R - H'00000000_00000000 32/64 */ +#define SH4A_PCIEERPERR (0x046018) /* R - H'00000000_00000000 32/64 */ +#define SH4A_PCIERXVC0DCTLR (0x046100) /* RW - H'00000000_00000000 32/64 */ +#define SH4A_PCIERXVC0SR (0x046108) /* RW - H'00000000_00000000 32/64 */ +#define SH4A_PCIEVC0PDRXR (0x046140) /* R - H'00000000_00000000 32/64 */ +#define SH4A_PCIEVC0PHRXR (0x046148) /* R - H'00000000_00000000 32/64 */ +#define SH4A_PCIEVC0PERR (0x046150) /* R - H'00000000_00000000 32/64 */ +#define SH4A_PCIEVC0NPDRXR (0x046158) /* R - H'00000000_00000000 32/64 */ +#define SH4A_PCIEVC0NPHRXR (0x046160) /* R - H'00000000_00000000 32/64 */ +#define SH4A_PCIEVC0NPERR (0x046168) /* R - H'00000000_00000000 32/64 */ +#define SH4A_PCIEVC0CDRXR (0x046170) /* R - H'00000000_00000000 32/64 */ +#define SH4A_PCIEVC0CHRXR (0x046178) /* R - H'00000000_00000000 32/64 */ +#define SH4A_PCIEVC0CERR (0x046180) /* R - H'00000000_00000000 32/64 */ +#define SH4A_PCIERXVCXDCTLR (0x046200) /* RW - H'00000000_00000000 32/64 */ +#define SH4A_PCIERXVCXSR (0x046208) /* RW - H'00000000_00000000 32/64 */ +#define SH4A_PCIEVCXPDRXR (0x046240) /* R - H'00000000_00000000 32/64 */ +#define SH4A_PCIEVCXPHRXR (0x046248) /* R H'00000000_00000000 32/64 */ +#define SH4A_PCIEVCXPERR (0x046250) /* R H'00000000_00000000 32/64 */ +#define SH4A_PCIEVCXNPDRXR (0x046258) /* R H'00000000_00000000 32/64 */ +#define SH4A_PCIEVCXNPHRXR (0x046260) /* R H'00000000_00000000 32/64 */ +#define SH4A_PCIEVCXNPERR (0x046268) /* R H'00000000_00000000 32/64 */ +#define SH4A_PCIEVCXCDRXR (0x046270) /* R H'00000000_00000000 32/64 */ +#define SH4A_PCIEVCXCHRXR (0x046278) /* R H'00000000_00000000 32/64 */ +#define SH4A_PCIEVCXCERR (0x046280) /* R H'00000000_00000000 32/64 */ + +/* SSI Register Definition for MSI WORK AROUND --hamada */ +#define SH4A_PCI_SSI_BASE 0xFFE00000 /* spw config address */ +#define SH4A_PCI_SSI_BASE_LEN 0x00100000 /* 1MB */ + +#define SH4A_SSICR0 (0x000000) +#define SH4A_SSICR1 (0x010000) +#define SH4A_SSICR2 (0x020000) +#define SH4A_SSICR3 (0x030000) + +#define PCI_REG(x) ((x) + 0x40000) + +static inline void +pci_write_reg(struct pci_channel *chan, unsigned long val, unsigned long reg) +{ + __raw_writel(val, chan->reg_base + reg); +} + +static inline unsigned long +pci_read_reg(struct pci_channel *chan, unsigned long reg) +{ + return __raw_readl(chan->reg_base + reg); +} + +#endif /* __PCI_SH7786_H */ -- cgit v1.1 From 78ddb274b9ad81e64f55b19baf83d4a67e351973 Mon Sep 17 00:00:00 2001 From: Sam Ravnborg <sam@ravnborg.org> Date: Mon, 8 Jun 2009 19:48:32 +0200 Subject: [IA64] unexport fpswa.h fpswa.h is not relevant for userspace, so do not export it. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Tony Luck <tony.luck@intel.com> --- arch/ia64/include/asm/Kbuild | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/ia64/include/asm/Kbuild b/arch/ia64/include/asm/Kbuild index ccbe8ae..c7d0a71 100644 --- a/arch/ia64/include/asm/Kbuild +++ b/arch/ia64/include/asm/Kbuild @@ -2,7 +2,6 @@ include include/asm-generic/Kbuild.asm header-y += break.h header-y += fpu.h -header-y += fpswa.h header-y += ia64regs.h header-y += intel_intrin.h header-y += perfmon_default_smpl.h -- cgit v1.1 From 8a7c3cd3123d9278d8c505a9c8d0f7a5d7a0b3ca Mon Sep 17 00:00:00 2001 From: Thomas Gleixner <tglx@linutronix.de> Date: Wed, 10 Jun 2009 12:44:59 -0700 Subject: [IA64] remove obsolete no_irq_type The defines and typedefs (hw_interrupt_type, no_irq_type, irq_desc_t) have been kept around for migration reasons. After more than two years it's time to remove them finally. This patch cleans up one of the remaining users. When all such patches hit mainline we can remove the defines and typedefs finally. Impact: cleanup convert the last remaining users to no_irq_chip Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Tony Luck <tony.luck@intel.com> --- arch/ia64/hp/sim/hpsim_irq.c | 2 +- arch/ia64/kernel/iosapic.c | 2 +- arch/ia64/sn/kernel/irq.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/ia64/hp/sim/hpsim_irq.c b/arch/ia64/hp/sim/hpsim_irq.c index acb5047..17e5832 100644 --- a/arch/ia64/hp/sim/hpsim_irq.c +++ b/arch/ia64/hp/sim/hpsim_irq.c @@ -46,7 +46,7 @@ hpsim_irq_init (void) for (i = 0; i < NR_IRQS; ++i) { idesc = irq_desc + i; - if (idesc->chip == &no_irq_type) + if (idesc->chip == &no_irq_chip) idesc->chip = &irq_type_hp_sim; } } diff --git a/arch/ia64/kernel/iosapic.c b/arch/ia64/kernel/iosapic.c index f92cef4..0900be6 100644 --- a/arch/ia64/kernel/iosapic.c +++ b/arch/ia64/kernel/iosapic.c @@ -650,7 +650,7 @@ register_intr (unsigned int gsi, int irq, unsigned char delivery, idesc = irq_desc + irq; if (irq_type != NULL && idesc->chip != irq_type) { - if (idesc->chip != &no_irq_type) + if (idesc->chip != &no_irq_chip) printk(KERN_WARNING "%s: changing vector %d from %s to %s\n", __func__, irq_to_vector(irq), diff --git a/arch/ia64/sn/kernel/irq.c b/arch/ia64/sn/kernel/irq.c index 764f26a..e117f19 100644 --- a/arch/ia64/sn/kernel/irq.c +++ b/arch/ia64/sn/kernel/irq.c @@ -301,7 +301,7 @@ void sn_irq_init(void) ia64_last_device_vector = IA64_SN2_LAST_DEVICE_VECTOR; for (i = 0; i < NR_IRQS; i++) { - if (base_desc[i].chip == &no_irq_type) { + if (base_desc[i].chip == &no_irq_chip) { base_desc[i].chip = &irq_type_sn; } } -- cgit v1.1 From 86bc3dfe6a76eb2fd332694f5052c862a3314efd Mon Sep 17 00:00:00 2001 From: Thomas Gleixner <tglx@linutronix.de> Date: Wed, 10 Jun 2009 12:45:00 -0700 Subject: [IA64] remove obsolete irq_desc_t typedef The defines and typedefs (hw_interrupt_type, no_irq_type, irq_desc_t) have been kept around for migration reasons. After more than two years it's time to remove them finally. This patch cleans up one of the remaining users. When all such patches hit mainline we can remove the defines and typedefs finally. Impact: cleanup Convert the last remaining users and remove the typedef. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Tony Luck <tony.luck@intel.com> --- arch/ia64/hp/sim/hpsim_irq.c | 2 +- arch/ia64/include/asm/hw_irq.h | 2 +- arch/ia64/kernel/iosapic.c | 6 +++--- arch/ia64/kernel/irq.c | 2 +- arch/ia64/kernel/irq_ia64.c | 2 +- arch/ia64/kernel/mca.c | 2 +- arch/ia64/kernel/smpboot.c | 2 +- arch/ia64/sn/kernel/irq.c | 4 ++-- arch/ia64/xen/irq_xen.c | 2 +- 9 files changed, 12 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/ia64/hp/sim/hpsim_irq.c b/arch/ia64/hp/sim/hpsim_irq.c index 17e5832..e14b8f2 100644 --- a/arch/ia64/hp/sim/hpsim_irq.c +++ b/arch/ia64/hp/sim/hpsim_irq.c @@ -41,7 +41,7 @@ static struct hw_interrupt_type irq_type_hp_sim = { void __init hpsim_irq_init (void) { - irq_desc_t *idesc; + struct irq_desc *idesc; int i; for (i = 0; i < NR_IRQS; ++i) { diff --git a/arch/ia64/include/asm/hw_irq.h b/arch/ia64/include/asm/hw_irq.h index 5c99cbc..276f9d4 100644 --- a/arch/ia64/include/asm/hw_irq.h +++ b/arch/ia64/include/asm/hw_irq.h @@ -146,7 +146,7 @@ static inline void ia64_native_resend_irq(unsigned int vector) * Default implementations for the irq-descriptor API: */ -extern irq_desc_t irq_desc[NR_IRQS]; +extern struct irq_desc irq_desc[NR_IRQS]; #ifndef CONFIG_IA64_GENERIC static inline ia64_vector __ia64_irq_to_vector(int irq) diff --git a/arch/ia64/kernel/iosapic.c b/arch/ia64/kernel/iosapic.c index 0900be6..a56f554 100644 --- a/arch/ia64/kernel/iosapic.c +++ b/arch/ia64/kernel/iosapic.c @@ -451,7 +451,7 @@ iosapic_startup_edge_irq (unsigned int irq) static void iosapic_ack_edge_irq (unsigned int irq) { - irq_desc_t *idesc = irq_desc + irq; + struct irq_desc *idesc = irq_desc + irq; irq_complete_move(irq); move_native_irq(irq); @@ -600,7 +600,7 @@ static int register_intr (unsigned int gsi, int irq, unsigned char delivery, unsigned long polarity, unsigned long trigger) { - irq_desc_t *idesc; + struct irq_desc *idesc; struct hw_interrupt_type *irq_type; int index; struct iosapic_rte_info *rte; @@ -828,7 +828,7 @@ iosapic_unregister_intr (unsigned int gsi) { unsigned long flags; int irq, index; - irq_desc_t *idesc; + struct irq_desc *idesc; u32 low32; unsigned long trigger, polarity; unsigned int dest; diff --git a/arch/ia64/kernel/irq.c b/arch/ia64/kernel/irq.c index 7429752..7d89512 100644 --- a/arch/ia64/kernel/irq.c +++ b/arch/ia64/kernel/irq.c @@ -130,7 +130,7 @@ unsigned int vectors_in_migration[NR_IRQS]; */ static void migrate_irqs(void) { - irq_desc_t *desc; + struct irq_desc *desc; int irq, new_cpu; for (irq=0; irq < NR_IRQS; irq++) { diff --git a/arch/ia64/kernel/irq_ia64.c b/arch/ia64/kernel/irq_ia64.c index b448197..dd9d7b5 100644 --- a/arch/ia64/kernel/irq_ia64.c +++ b/arch/ia64/kernel/irq_ia64.c @@ -630,7 +630,7 @@ static struct irqaction tlb_irqaction = { void ia64_native_register_percpu_irq (ia64_vector vec, struct irqaction *action) { - irq_desc_t *desc; + struct irq_desc *desc; unsigned int irq; irq = vec; diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c index 8f33a88..1cce4ce 100644 --- a/arch/ia64/kernel/mca.c +++ b/arch/ia64/kernel/mca.c @@ -2093,7 +2093,7 @@ ia64_mca_late_init(void) cpe_poll_timer.function = ia64_mca_cpe_poll; { - irq_desc_t *desc; + struct irq_desc *desc; unsigned int irq; if (cpe_vector >= 0) { diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c index 7700e23..2a70af4 100644 --- a/arch/ia64/kernel/smpboot.c +++ b/arch/ia64/kernel/smpboot.c @@ -678,7 +678,7 @@ extern void fixup_irqs(void); int migrate_platform_irqs(unsigned int cpu) { int new_cpei_cpu; - irq_desc_t *desc = NULL; + struct irq_desc *desc = NULL; const struct cpumask *mask; int retval = 0; diff --git a/arch/ia64/sn/kernel/irq.c b/arch/ia64/sn/kernel/irq.c index e117f19..40d6eed 100644 --- a/arch/ia64/sn/kernel/irq.c +++ b/arch/ia64/sn/kernel/irq.c @@ -295,7 +295,7 @@ unsigned int sn_local_vector_to_irq(u8 vector) void sn_irq_init(void) { int i; - irq_desc_t *base_desc = irq_desc; + struct irq_desc *base_desc = irq_desc; ia64_first_device_vector = IA64_SN2_FIRST_DEVICE_VECTOR; ia64_last_device_vector = IA64_SN2_LAST_DEVICE_VECTOR; @@ -377,7 +377,7 @@ void sn_irq_fixup(struct pci_dev *pci_dev, struct sn_irq_info *sn_irq_info) int cpu = nasid_slice_to_cpuid(nasid, slice); #ifdef CONFIG_SMP int cpuphys; - irq_desc_t *desc; + struct irq_desc *desc; #endif pci_dev_get(pci_dev); diff --git a/arch/ia64/xen/irq_xen.c b/arch/ia64/xen/irq_xen.c index af93aad..f042e19 100644 --- a/arch/ia64/xen/irq_xen.c +++ b/arch/ia64/xen/irq_xen.c @@ -138,7 +138,7 @@ static void __xen_register_percpu_irq(unsigned int cpu, unsigned int vec, struct irqaction *action, int save) { - irq_desc_t *desc; + struct irq_desc *desc; int irq = 0; if (xen_slab_ready) { -- cgit v1.1 From fb824f4838c3110c282268a3620f41da67b3f3fb Mon Sep 17 00:00:00 2001 From: Thomas Gleixner <tglx@linutronix.de> Date: Wed, 10 Jun 2009 12:45:00 -0700 Subject: [IA64] remove obsolete hw_interrupt_type The defines and typedefs (hw_interrupt_type, no_irq_type, irq_desc_t) have been kept around for migration reasons. After more than two years it's time to remove them finally. This patch cleans up one of the remaining users. When all such patches hit mainline we can remove the defines and typedefs finally. Impact: cleanup Convert the last remaining users to struct irq_chip and remove the define. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Tony Luck <tony.luck@intel.com> --- arch/ia64/hp/sim/hpsim_irq.c | 2 +- arch/ia64/include/asm/hw_irq.h | 2 +- arch/ia64/kernel/iosapic.c | 2 +- arch/ia64/kernel/irq_lsapic.c | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/ia64/hp/sim/hpsim_irq.c b/arch/ia64/hp/sim/hpsim_irq.c index e14b8f2..b272261 100644 --- a/arch/ia64/hp/sim/hpsim_irq.c +++ b/arch/ia64/hp/sim/hpsim_irq.c @@ -27,7 +27,7 @@ hpsim_set_affinity_noop(unsigned int a, const struct cpumask *b) return 0; } -static struct hw_interrupt_type irq_type_hp_sim = { +static struct irq_chip irq_type_hp_sim = { .name = "hpsim", .startup = hpsim_irq_startup, .shutdown = hpsim_irq_noop, diff --git a/arch/ia64/include/asm/hw_irq.h b/arch/ia64/include/asm/hw_irq.h index 276f9d4..91619b3 100644 --- a/arch/ia64/include/asm/hw_irq.h +++ b/arch/ia64/include/asm/hw_irq.h @@ -106,7 +106,7 @@ extern struct irq_cfg irq_cfg[NR_IRQS]; #define irq_to_domain(x) irq_cfg[(x)].domain DECLARE_PER_CPU(int[IA64_NUM_VECTORS], vector_irq); -extern struct hw_interrupt_type irq_type_ia64_lsapic; /* CPU-internal interrupt controller */ +extern struct irq_chip irq_type_ia64_lsapic; /* CPU-internal interrupt controller */ #ifdef CONFIG_PARAVIRT_GUEST #include <asm/paravirt.h> diff --git a/arch/ia64/kernel/iosapic.c b/arch/ia64/kernel/iosapic.c index a56f554..c48b03f 100644 --- a/arch/ia64/kernel/iosapic.c +++ b/arch/ia64/kernel/iosapic.c @@ -601,7 +601,7 @@ register_intr (unsigned int gsi, int irq, unsigned char delivery, unsigned long polarity, unsigned long trigger) { struct irq_desc *idesc; - struct hw_interrupt_type *irq_type; + struct irq_chip *irq_type; int index; struct iosapic_rte_info *rte; diff --git a/arch/ia64/kernel/irq_lsapic.c b/arch/ia64/kernel/irq_lsapic.c index e56a7a3..fc1549d 100644 --- a/arch/ia64/kernel/irq_lsapic.c +++ b/arch/ia64/kernel/irq_lsapic.c @@ -33,7 +33,7 @@ static int lsapic_retrigger(unsigned int irq) return 1; } -struct hw_interrupt_type irq_type_ia64_lsapic = { +struct irq_chip irq_type_ia64_lsapic = { .name = "LSAPIC", .startup = lsapic_noop_startup, .shutdown = lsapic_noop, -- cgit v1.1 From 9542b21e4f05a521a35752f49a522ef5a6221b4f Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput <jaswinder@kernel.org> Date: Wed, 10 Jun 2009 12:45:01 -0700 Subject: [IA64] msi_ia64.c dmar_msi_type should be static Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Tony Luck <tony.luck@intel.com> --- arch/ia64/kernel/msi_ia64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/ia64/kernel/msi_ia64.c b/arch/ia64/kernel/msi_ia64.c index 0f8ade9..6c89228 100644 --- a/arch/ia64/kernel/msi_ia64.c +++ b/arch/ia64/kernel/msi_ia64.c @@ -158,7 +158,7 @@ static int dmar_msi_set_affinity(unsigned int irq, const struct cpumask *mask) } #endif /* CONFIG_SMP */ -struct irq_chip dmar_msi_type = { +static struct irq_chip dmar_msi_type = { .name = "DMAR_MSI", .unmask = dmar_msi_unmask, .mask = dmar_msi_mask, -- cgit v1.1 From 5cef379b34ffcd96567066ddc1012bd40e6e7675 Mon Sep 17 00:00:00 2001 From: Becky Bruce <beckyb@kernel.crashing.org> Date: Thu, 14 May 2009 17:42:29 -0500 Subject: powerpc: Add 86xx support for SWIOTLB This is the final bit of code to allow enabling swiotlb on mpc86xx. The platform-specific code is very small and consists of enabling SWIOTLB in the config file, registering the swiotlb_setup_bus_notifier initcall, and setting pci_dma_ops to point to swiotlb_pci_dma_ops if we have more memory than can be mapped by the inbound PCI windows. Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> --- arch/powerpc/platforms/86xx/Kconfig | 1 + arch/powerpc/platforms/86xx/mpc86xx_hpcn.c | 15 +++++++++++++++ 2 files changed, 16 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig index fdaf4dd..9c7b64a 100644 --- a/arch/powerpc/platforms/86xx/Kconfig +++ b/arch/powerpc/platforms/86xx/Kconfig @@ -15,6 +15,7 @@ config MPC8641_HPCN select DEFAULT_UIMAGE select FSL_ULI1575 select HAS_RAPIDIO + select SWIOTLB help This option enables support for the MPC8641 HPCN board. diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c index 7e9e83c..6632702 100644 --- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c +++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c @@ -19,6 +19,7 @@ #include <linux/delay.h> #include <linux/seq_file.h> #include <linux/of_platform.h> +#include <linux/lmb.h> #include <asm/system.h> #include <asm/time.h> @@ -27,6 +28,7 @@ #include <asm/prom.h> #include <mm/mmu_decl.h> #include <asm/udbg.h> +#include <asm/swiotlb.h> #include <asm/mpic.h> @@ -70,7 +72,9 @@ mpc86xx_hpcn_setup_arch(void) { #ifdef CONFIG_PCI struct device_node *np; + struct pci_controller *hose; #endif + dma_addr_t max = 0xffffffff; if (ppc_md.progress) ppc_md.progress("mpc86xx_hpcn_setup_arch()", 0); @@ -83,6 +87,9 @@ mpc86xx_hpcn_setup_arch(void) fsl_add_bridge(np, 1); else fsl_add_bridge(np, 0); + hose = pci_find_hose_for_OF_device(np); + max = min(max, hose->dma_window_base_cur + + hose->dma_window_size); } ppc_md.pci_exclude_device = mpc86xx_exclude_device; @@ -94,6 +101,13 @@ mpc86xx_hpcn_setup_arch(void) #ifdef CONFIG_SMP mpc86xx_smp_init(); #endif + +#ifdef CONFIG_SWIOTLB + if (lmb_end_of_DRAM() > max) { + ppc_swiotlb_enable = 1; + set_pci_dma_ops(&swiotlb_pci_dma_ops); + } +#endif } @@ -158,6 +172,7 @@ static int __init declare_of_platform_devices(void) return 0; } machine_device_initcall(mpc86xx_hpcn, declare_of_platform_devices); +machine_arch_initcall(mpc86xx_hpcn, swiotlb_setup_bus_notifier); define_machine(mpc86xx_hpcn) { .name = "MPC86xx HPCN", -- cgit v1.1 From 152d0182822e871a3fe1f6d97949d83fad950e26 Mon Sep 17 00:00:00 2001 From: Kumar Gala <galak@kernel.crashing.org> Date: Fri, 15 May 2009 00:37:35 -0500 Subject: powerpc/85xx: Add SWIOTLB support to FSL boards Add the platform-specific code for enabling SWIOTLB if needed on P2020DS, MPC85xx DS, and MPC85xx MDS boards as they are capable of having >4G of memory. We determine if we need to enable swiotlb based on how much memory is in the board and if it exceeds 4G or what we can map via PCI inbound windows. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> --- arch/powerpc/platforms/85xx/Kconfig | 3 +++ arch/powerpc/platforms/85xx/mpc8536_ds.c | 17 +++++++++++++++++ arch/powerpc/platforms/85xx/mpc85xx_ds.c | 19 +++++++++++++++++++ arch/powerpc/platforms/85xx/mpc85xx_mds.c | 20 ++++++++++++++++++++ 4 files changed, 59 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index 43d385c..0ee5b12c 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -35,12 +35,14 @@ config MPC85xx_MDS select DEFAULT_UIMAGE select PHYLIB select HAS_RAPIDIO + select SWIOTLB help This option enables support for the MPC85xx MDS board config MPC8536_DS bool "Freescale MPC8536 DS" select DEFAULT_UIMAGE + select SWIOTLB help This option enables support for the MPC8536 DS board @@ -49,6 +51,7 @@ config MPC85xx_DS select PPC_I8259 select DEFAULT_UIMAGE select FSL_ULI1575 + select SWIOTLB help This option enables support for the MPC85xx DS (MPC8544 DS) board diff --git a/arch/powerpc/platforms/85xx/mpc8536_ds.c b/arch/powerpc/platforms/85xx/mpc8536_ds.c index 63efca2..055ff41 100644 --- a/arch/powerpc/platforms/85xx/mpc8536_ds.c +++ b/arch/powerpc/platforms/85xx/mpc8536_ds.c @@ -17,6 +17,7 @@ #include <linux/seq_file.h> #include <linux/interrupt.h> #include <linux/of_platform.h> +#include <linux/lmb.h> #include <asm/system.h> #include <asm/time.h> @@ -26,6 +27,7 @@ #include <asm/prom.h> #include <asm/udbg.h> #include <asm/mpic.h> +#include <asm/swiotlb.h> #include <sysdev/fsl_soc.h> #include <sysdev/fsl_pci.h> @@ -65,7 +67,9 @@ static void __init mpc8536_ds_setup_arch(void) { #ifdef CONFIG_PCI struct device_node *np; + struct pci_controller *hose; #endif + dma_addr_t max = 0xffffffff; if (ppc_md.progress) ppc_md.progress("mpc8536_ds_setup_arch()", 0); @@ -80,11 +84,22 @@ static void __init mpc8536_ds_setup_arch(void) fsl_add_bridge(np, 1); else fsl_add_bridge(np, 0); + + hose = pci_find_hose_for_OF_device(np); + max = min(max, hose->dma_window_base_cur + + hose->dma_window_size); } } #endif +#ifdef CONFIG_SWIOTLB + if (lmb_end_of_DRAM() > max) { + ppc_swiotlb_enable = 1; + set_pci_dma_ops(&swiotlb_pci_dma_ops); + } +#endif + printk("MPC8536 DS board from Freescale Semiconductor\n"); } @@ -102,6 +117,8 @@ static int __init mpc8536_ds_publish_devices(void) } machine_device_initcall(mpc8536_ds, mpc8536_ds_publish_devices); +machine_arch_initcall(mpc8536_ds, swiotlb_setup_bus_notifier); + /* * Called very early, device-tree isn't unflattened */ diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c index 53d5851..849c0ac 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c @@ -20,6 +20,7 @@ #include <linux/seq_file.h> #include <linux/interrupt.h> #include <linux/of_platform.h> +#include <linux/lmb.h> #include <asm/system.h> #include <asm/time.h> @@ -30,6 +31,7 @@ #include <asm/udbg.h> #include <asm/mpic.h> #include <asm/i8259.h> +#include <asm/swiotlb.h> #include <sysdev/fsl_soc.h> #include <sysdev/fsl_pci.h> @@ -155,7 +157,9 @@ static void __init mpc85xx_ds_setup_arch(void) { #ifdef CONFIG_PCI struct device_node *np; + struct pci_controller *hose; #endif + dma_addr_t max = 0xffffffff; if (ppc_md.progress) ppc_md.progress("mpc85xx_ds_setup_arch()", 0); @@ -171,6 +175,10 @@ static void __init mpc85xx_ds_setup_arch(void) fsl_add_bridge(np, 1); else fsl_add_bridge(np, 0); + + hose = pci_find_hose_for_OF_device(np); + max = min(max, hose->dma_window_base_cur + + hose->dma_window_size); } } @@ -181,6 +189,13 @@ static void __init mpc85xx_ds_setup_arch(void) mpc85xx_smp_init(); #endif +#ifdef CONFIG_SWIOTLB + if (lmb_end_of_DRAM() > max) { + ppc_swiotlb_enable = 1; + set_pci_dma_ops(&swiotlb_pci_dma_ops); + } +#endif + printk("MPC85xx DS board from Freescale Semiconductor\n"); } @@ -217,6 +232,10 @@ machine_device_initcall(mpc8544_ds, mpc85xxds_publish_devices); machine_device_initcall(mpc8572_ds, mpc85xxds_publish_devices); machine_device_initcall(p2020_ds, mpc85xxds_publish_devices); +machine_arch_initcall(mpc8544_ds, swiotlb_setup_bus_notifier); +machine_arch_initcall(mpc8572_ds, swiotlb_setup_bus_notifier); +machine_arch_initcall(p2020_ds, swiotlb_setup_bus_notifier); + /* * Called very early, device-tree isn't unflattened */ diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c index b2c0a43..77f90b3 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c @@ -33,6 +33,7 @@ #include <linux/of_platform.h> #include <linux/of_device.h> #include <linux/phy.h> +#include <linux/lmb.h> #include <asm/system.h> #include <asm/atomic.h> @@ -49,6 +50,7 @@ #include <asm/qe.h> #include <asm/qe_ic.h> #include <asm/mpic.h> +#include <asm/swiotlb.h> #undef DEBUG #ifdef DEBUG @@ -155,6 +157,10 @@ static void __init mpc85xx_mds_setup_arch(void) { struct device_node *np; static u8 __iomem *bcsr_regs = NULL; +#ifdef CONFIG_PCI + struct pci_controller *hose; +#endif + dma_addr_t max = 0xffffffff; if (ppc_md.progress) ppc_md.progress("mpc85xx_mds_setup_arch()", 0); @@ -179,6 +185,10 @@ static void __init mpc85xx_mds_setup_arch(void) fsl_add_bridge(np, 1); else fsl_add_bridge(np, 0); + + hose = pci_find_hose_for_OF_device(np); + max = min(max, hose->dma_window_base_cur + + hose->dma_window_size); } } #endif @@ -227,6 +237,13 @@ static void __init mpc85xx_mds_setup_arch(void) iounmap(bcsr_regs); } #endif /* CONFIG_QUICC_ENGINE */ + +#ifdef CONFIG_SWIOTLB + if (lmb_end_of_DRAM() > max) { + ppc_swiotlb_enable = 1; + set_pci_dma_ops(&swiotlb_pci_dma_ops); + } +#endif } @@ -281,6 +298,9 @@ static int __init mpc85xx_publish_devices(void) machine_device_initcall(mpc8568_mds, mpc85xx_publish_devices); machine_device_initcall(mpc8569_mds, mpc85xx_publish_devices); +machine_arch_initcall(mpc8568_mds, swiotlb_setup_bus_notifier); +machine_arch_initcall(mpc8569_mds, swiotlb_setup_bus_notifier); + static void __init mpc85xx_mds_pic_init(void) { struct mpic *mpic; -- cgit v1.1 From c7a7a5b9a27e28ce5f800ead9091ce68d37e8088 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk <wd@denx.de> Date: Tue, 12 May 2009 21:06:14 +0200 Subject: powerpc/mpc8272ads: fix device tree for 8 MB flash size The current device tree for the MPC8272ADS assumes a mapping of 32 MB of NOR flash at 0xFE00.0000, while there are actually only 8 MB on the boards, mapped at 0xFF80.0000. When booting an uImage with such a device tree, the kernel crashes because 0xFE00.0000 is not mapped. Also introduce aliases for serial[01] and ethernet[01]. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> --- arch/powerpc/boot/dts/mpc8272ads.dts | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/boot/dts/mpc8272ads.dts b/arch/powerpc/boot/dts/mpc8272ads.dts index 2a1929a..60f3327 100644 --- a/arch/powerpc/boot/dts/mpc8272ads.dts +++ b/arch/powerpc/boot/dts/mpc8272ads.dts @@ -17,6 +17,13 @@ #address-cells = <1>; #size-cells = <1>; + aliases { + ethernet0 = ð0; + ethernet1 = ð1; + serial0 = &scc1; + serial1 = &scc4; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -46,13 +53,13 @@ #size-cells = <1>; reg = <0xf0010100 0x40>; - ranges = <0x0 0x0 0xfe000000 0x2000000 + ranges = <0x0 0x0 0xff800000 0x00800000 0x1 0x0 0xf4500000 0x8000 0x3 0x0 0xf8200000 0x8000>; flash@0,0 { compatible = "jedec-flash"; - reg = <0x0 0x0 0x2000000>; + reg = <0x0 0x0 0x00800000>; bank-width = <4>; device-width = <1>; }; @@ -144,7 +151,7 @@ reg = <0x119f0 0x10 0x115f0 0x10>; }; - serial@11a00 { + scc1: serial@11a00 { device_type = "serial"; compatible = "fsl,mpc8272-scc-uart", "fsl,cpm2-scc-uart"; @@ -155,7 +162,7 @@ fsl,cpm-command = <0x800000>; }; - serial@11a60 { + scc4: serial@11a60 { device_type = "serial"; compatible = "fsl,mpc8272-scc-uart", "fsl,cpm2-scc-uart"; @@ -192,7 +199,7 @@ }; }; - ethernet@11300 { + eth0: ethernet@11300 { device_type = "network"; compatible = "fsl,mpc8272-fcc-enet", "fsl,cpm2-fcc-enet"; @@ -205,7 +212,7 @@ fsl,cpm-command = <0x12000300>; }; - ethernet@11320 { + eth1: ethernet@11320 { device_type = "network"; compatible = "fsl,mpc8272-fcc-enet", "fsl,cpm2-fcc-enet"; -- cgit v1.1 From cab888e678d0986ebce95464d3842a6aeca1e3d8 Mon Sep 17 00:00:00 2001 From: Nate Case <ncase@xes-inc.com> Date: Wed, 10 Jun 2009 15:37:28 -0500 Subject: powerpc/fsl-booke: Enable L1 cache on e500v1/e500v2/e500mc CPUs Some boot loaders may not enable L1 instruction/data cache. Check if data and instruction caches are enabled, and enable them if needed. Signed-off-by: Nate Case <ncase@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> --- arch/powerpc/include/asm/reg_booke.h | 2 ++ arch/powerpc/kernel/cpu_setup_fsl_booke.S | 49 +++++++++++++++++++++++++++++-- 2 files changed, 48 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h index 601ddbc..6bcf364 100644 --- a/arch/powerpc/include/asm/reg_booke.h +++ b/arch/powerpc/include/asm/reg_booke.h @@ -389,12 +389,14 @@ #define ICCR_CACHE 1 /* Cacheable */ /* Bit definitions for L1CSR0. */ +#define L1CSR0_CPE 0x00010000 /* Data Cache Parity Enable */ #define L1CSR0_CLFC 0x00000100 /* Cache Lock Bits Flash Clear */ #define L1CSR0_DCFI 0x00000002 /* Data Cache Flash Invalidate */ #define L1CSR0_CFI 0x00000002 /* Cache Flash Invalidate */ #define L1CSR0_DCE 0x00000001 /* Data Cache Enable */ /* Bit definitions for L1CSR1. */ +#define L1CSR1_CPE 0x00010000 /* Instruction Cache Parity Enable */ #define L1CSR1_ICLFR 0x00000100 /* Instr Cache Lock Bits Flash Reset */ #define L1CSR1_ICFI 0x00000002 /* Instr Cache Flash Invalidate */ #define L1CSR1_ICE 0x00000001 /* Instr Cache Enable */ diff --git a/arch/powerpc/kernel/cpu_setup_fsl_booke.S b/arch/powerpc/kernel/cpu_setup_fsl_booke.S index eb4b9ad..0adb50a 100644 --- a/arch/powerpc/kernel/cpu_setup_fsl_booke.S +++ b/arch/powerpc/kernel/cpu_setup_fsl_booke.S @@ -17,6 +17,40 @@ #include <asm/cputable.h> #include <asm/ppc_asm.h> +_GLOBAL(__e500_icache_setup) + mfspr r0, SPRN_L1CSR1 + andi. r3, r0, L1CSR1_ICE + bnelr /* Already enabled */ + oris r0, r0, L1CSR1_CPE@h + ori r0, r0, (L1CSR1_ICFI | L1CSR1_ICLFR | L1CSR1_ICE) + mtspr SPRN_L1CSR1, r0 /* Enable I-Cache */ + isync + blr + +_GLOBAL(__e500_dcache_setup) + mfspr r0, SPRN_L1CSR0 + andi. r3, r0, L1CSR0_DCE + bnelr /* Already enabled */ + msync + isync + li r0, 0 + mtspr SPRN_L1CSR0, r0 /* Disable */ + msync + isync + li r0, (L1CSR0_DCFI | L1CSR0_CLFC) + mtspr SPRN_L1CSR0, r0 /* Invalidate */ + isync +1: mfspr r0, SPRN_L1CSR0 + andi. r3, r0, L1CSR0_CLFC + bne+ 1b /* Wait for lock bits reset */ + oris r0, r0, L1CSR0_CPE@h + ori r0, r0, L1CSR0_DCE + msync + isync + mtspr SPRN_L1CSR0, r0 /* Enable */ + isync + blr + _GLOBAL(__setup_cpu_e200) /* enable dedicated debug exception handling resources (Debug APU) */ mfspr r3,SPRN_HID0 @@ -25,7 +59,16 @@ _GLOBAL(__setup_cpu_e200) b __setup_e200_ivors _GLOBAL(__setup_cpu_e500v1) _GLOBAL(__setup_cpu_e500v2) - b __setup_e500_ivors + mflr r4 + bl __e500_icache_setup + bl __e500_dcache_setup + bl __setup_e500_ivors + mtlr r4 + blr _GLOBAL(__setup_cpu_e500mc) - b __setup_e500mc_ivors - + mflr r4 + bl __e500_icache_setup + bl __e500_dcache_setup + bl __setup_e500mc_ivors + mtlr r4 + blr -- cgit v1.1 From 1a2eceaacd3721336bc08ffdca546e1a8ff2429d Mon Sep 17 00:00:00 2001 From: Anton Vorontsov <avorontsov@ru.mvista.com> Date: Wed, 10 Jun 2009 19:19:26 +0400 Subject: powerpc/83xx: Update sdhci nodes per new bindings As of commit 404614728f857d0ac63d29c3a29d0cf392a15598 ("Update FSL esdhc binding"), we use "fsl,esdhc" compatible entry as a base match. U-Boot will use the same compatible to fixup esdhc nodes. This patch updates 83xx dts files so that they conform to the new bindings. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> --- arch/powerpc/boot/dts/mpc8377_mds.dts | 2 +- arch/powerpc/boot/dts/mpc8377_rdb.dts | 2 +- arch/powerpc/boot/dts/mpc8378_mds.dts | 2 +- arch/powerpc/boot/dts/mpc8378_rdb.dts | 2 +- arch/powerpc/boot/dts/mpc8379_mds.dts | 2 +- arch/powerpc/boot/dts/mpc8379_rdb.dts | 2 +- 6 files changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts index 67bb372..f32c281 100644 --- a/arch/powerpc/boot/dts/mpc8377_mds.dts +++ b/arch/powerpc/boot/dts/mpc8377_mds.dts @@ -155,7 +155,7 @@ }; sdhci@2e000 { - compatible = "fsl,mpc8377-esdhc", "fsl,mpc8379-esdhc"; + compatible = "fsl,mpc8377-esdhc", "fsl,esdhc"; reg = <0x2e000 0x1000>; interrupts = <42 0x8>; interrupt-parent = <&ipic>; diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts index 0533393..224b4f0 100644 --- a/arch/powerpc/boot/dts/mpc8377_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts @@ -169,7 +169,7 @@ }; sdhci@2e000 { - compatible = "fsl,mpc8377-esdhc", "fsl,mpc8379-esdhc"; + compatible = "fsl,mpc8377-esdhc", "fsl,esdhc"; reg = <0x2e000 0x1000>; interrupts = <42 0x8>; interrupt-parent = <&ipic>; diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/boot/dts/mpc8378_mds.dts index a955a57..f720ab9 100644 --- a/arch/powerpc/boot/dts/mpc8378_mds.dts +++ b/arch/powerpc/boot/dts/mpc8378_mds.dts @@ -155,7 +155,7 @@ }; sdhci@2e000 { - compatible = "fsl,mpc8378-esdhc", "fsl,mpc8379-esdhc"; + compatible = "fsl,mpc8378-esdhc", "fsl,esdhc"; reg = <0x2e000 0x1000>; interrupts = <42 0x8>; interrupt-parent = <&ipic>; diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts index 5d90e85..474ea2f 100644 --- a/arch/powerpc/boot/dts/mpc8378_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts @@ -169,7 +169,7 @@ }; sdhci@2e000 { - compatible = "fsl,mpc8378-esdhc", "fsl,mpc8379-esdhc"; + compatible = "fsl,mpc8378-esdhc", "fsl,esdhc"; reg = <0x2e000 0x1000>; interrupts = <42 0x8>; interrupt-parent = <&ipic>; diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts index d266ddb..4fa221f 100644 --- a/arch/powerpc/boot/dts/mpc8379_mds.dts +++ b/arch/powerpc/boot/dts/mpc8379_mds.dts @@ -153,7 +153,7 @@ }; sdhci@2e000 { - compatible = "fsl,mpc8379-esdhc"; + compatible = "fsl,mpc8379-esdhc", "fsl,esdhc"; reg = <0x2e000 0x1000>; interrupts = <42 0x8>; interrupt-parent = <&ipic>; diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts index 98ae95b..d4838af 100644 --- a/arch/powerpc/boot/dts/mpc8379_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts @@ -167,7 +167,7 @@ }; sdhci@2e000 { - compatible = "fsl,mpc8379-esdhc"; + compatible = "fsl,mpc8379-esdhc", "fsl,esdhc"; reg = <0x2e000 0x1000>; interrupts = <42 0x8>; interrupt-parent = <&ipic>; -- cgit v1.1 From b4a31c94b6445b9e2cfe62efbb8109ac6ebd11aa Mon Sep 17 00:00:00 2001 From: Haiying Wang <Haiying.Wang@freescale.com> Date: Tue, 2 Jun 2009 10:04:16 -0400 Subject: powerpc/85xx: Add UCC6 and UCC8 nodes in SGMII mode for MPC8569MDS Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> --- arch/powerpc/boot/dts/mpc8569mds.dts | 63 ++++++++++++++++++++++++++++++++++++ 1 file changed, 63 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/boot/dts/mpc8569mds.dts b/arch/powerpc/boot/dts/mpc8569mds.dts index 39c2927..4e95abd 100644 --- a/arch/powerpc/boot/dts/mpc8569mds.dts +++ b/arch/powerpc/boot/dts/mpc8569mds.dts @@ -24,6 +24,8 @@ ethernet1 = &enet1; ethernet2 = &enet2; ethernet3 = &enet3; + ethernet5 = &enet5; + ethernet7 = &enet7; pci1 = &pci1; rapidio0 = &rio0; }; @@ -466,6 +468,37 @@ reg = <0x3>; device_type = "ethernet-phy"; }; + qe_phy5: ethernet-phy@04 { + interrupt-parent = <&mpic>; + reg = <0x04>; + device_type = "ethernet-phy"; + }; + qe_phy7: ethernet-phy@06 { + interrupt-parent = <&mpic>; + reg = <0x6>; + device_type = "ethernet-phy"; + }; + }; + mdio@3520 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3520 0x18>; + compatible = "fsl,ucc-mdio"; + + tbi0: tbi-phy@15 { + reg = <0x15>; + device_type = "tbi-phy"; + }; + }; + mdio@3720 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3720 0x38>; + compatible = "fsl,ucc-mdio"; + tbi1: tbi-phy@17 { + reg = <0x17>; + device_type = "tbi-phy"; + }; }; enet2: ucc@2200 { @@ -513,6 +546,36 @@ phy-connection-type = "rgmii-id"; }; + enet5: ucc@3400 { + device_type = "network"; + compatible = "ucc_geth"; + cell-index = <6>; + reg = <0x3400 0x200>; + interrupts = <41>; + interrupt-parent = <&qeic>; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "none"; + tx-clock-name = "none"; + tbi-handle = <&tbi0>; + phy-handle = <&qe_phy5>; + phy-connection-type = "sgmii"; + }; + + enet7: ucc@3600 { + device_type = "network"; + compatible = "ucc_geth"; + cell-index = <8>; + reg = <0x3600 0x200>; + interrupts = <43>; + interrupt-parent = <&qeic>; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "none"; + tx-clock-name = "none"; + tbi-handle = <&tbi1>; + phy-handle = <&qe_phy7>; + phy-connection-type = "sgmii"; + }; + muram@10000 { #address-cells = <1>; #size-cells = <1>; -- cgit v1.1 From 7a5c62fbfb86e731eab0798a1a02ff0d915ea10a Mon Sep 17 00:00:00 2001 From: Martyn Welch <martyn.welch@gefanuc.com> Date: Tue, 19 May 2009 10:40:57 +0100 Subject: powerpc/86xx: Add I2C device mappings in DTS for SBC610 Mappings for temperature sensors (adt7461 and lm92) are missing from the SBC610's DTS file. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> --- arch/powerpc/boot/dts/gef_sbc610.dts | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/boot/dts/gef_sbc610.dts b/arch/powerpc/boot/dts/gef_sbc610.dts index 217f8aa..35a6318 100644 --- a/arch/powerpc/boot/dts/gef_sbc610.dts +++ b/arch/powerpc/boot/dts/gef_sbc610.dts @@ -152,6 +152,16 @@ interrupt-parent = <&mpic>; dfsrr; + hwmon@48 { + compatible = "national,lm92"; + reg = <0x48>; + }; + + hwmon@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + rtc@51 { compatible = "epson,rx8581"; reg = <0x00000051>; -- cgit v1.1 From 4dc2a6cf82746c1e632aad0cd38615a35f8df075 Mon Sep 17 00:00:00 2001 From: "leon.woestenberg@gmail.com" <leon.woestenberg@gmail.com> Date: Sat, 6 Jun 2009 09:15:13 -0700 Subject: powerpc/83xx: Add MSI interrupts to DTS of MPC8315E-RDB The PCIe MSI interrupts are missing from the device tree source, and thus were not enabled. This patch adds them. Tested to work on MPC8315E-RDB with custom FPGA PCIe device. Signed-off-by: Leon Woestenberg <leon@sidebranch.com> Tested-by: Leon Woestenberg <leon@sidebranch.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> --- arch/powerpc/boot/dts/mpc8315erdb.dts | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/boot/dts/mpc8315erdb.dts b/arch/powerpc/boot/dts/mpc8315erdb.dts index 3f4c5fb..32e10f5 100644 --- a/arch/powerpc/boot/dts/mpc8315erdb.dts +++ b/arch/powerpc/boot/dts/mpc8315erdb.dts @@ -322,6 +322,21 @@ reg = <0x700 0x100>; device_type = "ipic"; }; + + ipic-msi@7c0 { + compatible = "fsl,ipic-msi"; + reg = <0x7c0 0x40>; + msi-available-ranges = <0 0x100>; + interrupts = <0x43 0x8 + 0x4 0x8 + 0x51 0x8 + 0x52 0x8 + 0x56 0x8 + 0x57 0x8 + 0x58 0x8 + 0x59 0x8>; + interrupt-parent = < &ipic >; + }; }; pci0: pci@e0008500 { -- cgit v1.1 From b7d66c88c968379ebe683a28c4005895497ebbad Mon Sep 17 00:00:00 2001 From: Peter Korsgaard <jacmet@sunsite.dk> Date: Tue, 9 Jun 2009 13:43:32 +0200 Subject: powerpc/mpc83xx: Fix usb mux setup for mpc834x usb0 and usb1 mux settings in the sicrl register were swapped (twice!) in mpc834x_usb_cfg(), leading to various strange issues with fsl-ehci and full speed devices. The USB port config on mpc834x is done using 2 muxes: Port 0 is always used for MPH port 0, and port 1 can either be used for MPH port 1 or DR (unless DR uses UTMI phy or OTG, then it uses both ports) - See 8349 RM figure 1-4.. mpc8349_usb_cfg() had this inverted for the DR, and it also had the bit positions of the usb0 / usb1 mux settings swapped. It would basically work if you specified port1 instead of port0 for the MPH controller (and happened to use ULPI phys), which is what all the 834x dts have done, even though that configuration is physically invalid. Instead fix mpc8349_usb_cfg() and adjust the dts files to match reality. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> --- arch/powerpc/boot/dts/asp834x-redboot.dts | 2 +- arch/powerpc/boot/dts/mpc8349emitx.dts | 2 +- arch/powerpc/boot/dts/mpc834x_mds.dts | 2 +- arch/powerpc/boot/dts/sbc8349.dts | 2 +- arch/powerpc/platforms/83xx/mpc83xx.h | 4 ++-- arch/powerpc/platforms/83xx/usb.c | 10 +++++----- 6 files changed, 11 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/boot/dts/asp834x-redboot.dts b/arch/powerpc/boot/dts/asp834x-redboot.dts index 7da84fd..261d10c 100644 --- a/arch/powerpc/boot/dts/asp834x-redboot.dts +++ b/arch/powerpc/boot/dts/asp834x-redboot.dts @@ -167,7 +167,7 @@ interrupt-parent = <&ipic>; interrupts = <39 0x8>; phy_type = "ulpi"; - port1; + port0; }; /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ usb@23000 { diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts index e3eeaed..feeeb7f 100644 --- a/arch/powerpc/boot/dts/mpc8349emitx.dts +++ b/arch/powerpc/boot/dts/mpc8349emitx.dts @@ -156,7 +156,7 @@ interrupt-parent = <&ipic>; interrupts = <39 0x8>; phy_type = "ulpi"; - port1; + port0; }; usb@23000 { diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts index a2553a6..230febb 100644 --- a/arch/powerpc/boot/dts/mpc834x_mds.dts +++ b/arch/powerpc/boot/dts/mpc834x_mds.dts @@ -153,7 +153,7 @@ interrupt-parent = <&ipic>; interrupts = <39 0x8>; phy_type = "ulpi"; - port1; + port0; }; /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ usb@23000 { diff --git a/arch/powerpc/boot/dts/sbc8349.dts b/arch/powerpc/boot/dts/sbc8349.dts index 5fb6f66..2d9fa68 100644 --- a/arch/powerpc/boot/dts/sbc8349.dts +++ b/arch/powerpc/boot/dts/sbc8349.dts @@ -144,7 +144,7 @@ interrupt-parent = <&ipic>; interrupts = <39 0x8>; phy_type = "ulpi"; - port1; + port0; }; /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ usb@23000 { diff --git a/arch/powerpc/platforms/83xx/mpc83xx.h b/arch/powerpc/platforms/83xx/mpc83xx.h index 83cfe51..d1dc5b0 100644 --- a/arch/powerpc/platforms/83xx/mpc83xx.h +++ b/arch/powerpc/platforms/83xx/mpc83xx.h @@ -22,8 +22,8 @@ /* system i/o configuration register low */ #define MPC83XX_SICRL_OFFS 0x114 #define MPC834X_SICRL_USB_MASK 0x60000000 -#define MPC834X_SICRL_USB0 0x40000000 -#define MPC834X_SICRL_USB1 0x20000000 +#define MPC834X_SICRL_USB0 0x20000000 +#define MPC834X_SICRL_USB1 0x40000000 #define MPC831X_SICRL_USB_MASK 0x00000c00 #define MPC831X_SICRL_USB_ULPI 0x00000800 #define MPC8315_SICRL_USB_MASK 0x000000fc diff --git a/arch/powerpc/platforms/83xx/usb.c b/arch/powerpc/platforms/83xx/usb.c index 11e1fac..3ba4bb7 100644 --- a/arch/powerpc/platforms/83xx/usb.c +++ b/arch/powerpc/platforms/83xx/usb.c @@ -47,25 +47,25 @@ int mpc834x_usb_cfg(void) sccr |= MPC83XX_SCCR_USB_DRCM_11; /* 1:3 */ prop = of_get_property(np, "phy_type", NULL); + port1_is_dr = 1; if (prop && (!strcmp(prop, "utmi") || !strcmp(prop, "utmi_wide"))) { sicrl |= MPC834X_SICRL_USB0 | MPC834X_SICRL_USB1; sicrh |= MPC834X_SICRH_USB_UTMI; - port1_is_dr = 1; + port0_is_dr = 1; } else if (prop && !strcmp(prop, "serial")) { dr_mode = of_get_property(np, "dr_mode", NULL); if (dr_mode && !strcmp(dr_mode, "otg")) { sicrl |= MPC834X_SICRL_USB0 | MPC834X_SICRL_USB1; - port1_is_dr = 1; + port0_is_dr = 1; } else { - sicrl |= MPC834X_SICRL_USB0; + sicrl |= MPC834X_SICRL_USB1; } } else if (prop && !strcmp(prop, "ulpi")) { - sicrl |= MPC834X_SICRL_USB0; + sicrl |= MPC834X_SICRL_USB1; } else { printk(KERN_WARNING "834x USB PHY type not supported\n"); } - port0_is_dr = 1; of_node_put(np); } np = of_find_compatible_node(NULL, NULL, "fsl-usb2-mph"); -- cgit v1.1 From f1f8b4948d19ae84fe37e36601ae064102dfa5ab Mon Sep 17 00:00:00 2001 From: Gerhard Pircher <gerhard_pircher@gmx.net> Date: Sat, 6 Jun 2009 11:12:36 +0000 Subject: powerpc: Enable additional BAT registers in setup_745x_specifics() Currently the kernel expects the additional four IBAT and DBAT registers to be available, but doesn't enable these registers on 745x CPUs, which have them disabled after reset. Thus set the HIGH_BAT_EN bit in HID0 register, if the corresponding MMU feature is defined. Signed-off-by: Gerhard Pircher <gerhard_pircher@gmx.net> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> --- arch/powerpc/kernel/cpu_setup_6xx.S | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/kernel/cpu_setup_6xx.S b/arch/powerpc/kernel/cpu_setup_6xx.S index 54f767e..1e9949e 100644 --- a/arch/powerpc/kernel/cpu_setup_6xx.S +++ b/arch/powerpc/kernel/cpu_setup_6xx.S @@ -239,6 +239,9 @@ END_FTR_SECTION_IFSET(CPU_FTR_L3CR) ori r11,r11,HID0_SGE | HID0_FOLD | HID0_BHTE ori r11,r11,HID0_LRSTK | HID0_BTIC oris r11,r11,HID0_DPM@h +BEGIN_MMU_FTR_SECTION + oris r11,r11,HID0_HIGH_BAT@h +END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_HIGH_BATS) BEGIN_FTR_SECTION xori r11,r11,HID0_BTIC END_FTR_SECTION_IFSET(CPU_FTR_NO_BTIC) -- cgit v1.1 From 7b9edb9d619a1b3ecd35d832d4a93803d4f0ca5f Mon Sep 17 00:00:00 2001 From: Nate Case <ncase@xes-inc.com> Date: Mon, 8 Jun 2009 17:17:42 -0500 Subject: powerpc/85xx: cuboot - Fix up ethernet3 MAC address on MPC85xx Some MPC85xx platforms do support 4 ethernet ports, so make sure the boot wrapper fixes up all of them in the fdt. Since MAC addresses are at the end of the bd_t structure there is no harm in expanding to support 4 MAC address on older 85xx systems that might not have that many. Signed-off-by: Nate Case <ncase@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> --- arch/powerpc/boot/cuboot-85xx.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/boot/cuboot-85xx.c b/arch/powerpc/boot/cuboot-85xx.c index 6776a1a..277ba4a 100644 --- a/arch/powerpc/boot/cuboot-85xx.c +++ b/arch/powerpc/boot/cuboot-85xx.c @@ -15,6 +15,7 @@ #include "cuboot.h" #define TARGET_85xx +#define TARGET_HAS_ETH3 #include "ppcboot.h" static bd_t bd; @@ -27,6 +28,7 @@ static void platform_fixups(void) dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr); dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr); dt_fixup_mac_address_by_alias("ethernet2", bd.bi_enet2addr); + dt_fixup_mac_address_by_alias("ethernet3", bd.bi_enet3addr); dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 8, bd.bi_busfreq); /* Unfortunately, the specific model number is encoded in the -- cgit v1.1 From e86b4998f00b51f60b4baab9bbef5e07c9407614 Mon Sep 17 00:00:00 2001 From: "mware@internode.on.net" <mware@internode.on.net> Date: Wed, 10 Jun 2009 17:01:19 +0000 Subject: powerpc/fsl: Increase the number of possible localbus banks Currently the fsl,*lbc devices support 8 banks (ie OR and BR registers). This is adequate for most pq2 and pq3 processors, but not the MPC8280 which has 12 banks. Signed-Off-By: Mark Ware <mware@elphinstone.net> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> --- arch/powerpc/include/asm/fsl_lbc.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/fsl_lbc.h b/arch/powerpc/include/asm/fsl_lbc.h index 63a4f77..1b5a210 100644 --- a/arch/powerpc/include/asm/fsl_lbc.h +++ b/arch/powerpc/include/asm/fsl_lbc.h @@ -95,8 +95,8 @@ struct fsl_lbc_bank { }; struct fsl_lbc_regs { - struct fsl_lbc_bank bank[8]; - u8 res0[0x28]; + struct fsl_lbc_bank bank[12]; + u8 res0[0x8]; __be32 mar; /**< UPM Address Register */ u8 res1[0x4]; __be32 mamr; /**< UPMA Mode Register */ -- cgit v1.1 From 40aa7353355f2d2766b2c960aff2f93e3dac4bfa Mon Sep 17 00:00:00 2001 From: Kevin Hao <kexin.hao@windriver.com> Date: Wed, 27 May 2009 10:05:05 +0800 Subject: powerpc/85xx: Add nor flash partitions for mpc8569mds Add 4 partitions in nor flash. Also fix nor flash bank width bug. The flash is capable of x8/x16 width but is configured for x8. Signed-off-by: Kevin Hao <kexin.hao@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> --- arch/powerpc/boot/dts/mpc8569mds.dts | 24 +++++++++++++++++++++++- 1 file changed, 23 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/boot/dts/mpc8569mds.dts b/arch/powerpc/boot/dts/mpc8569mds.dts index 4e95abd..a8dcb01 100644 --- a/arch/powerpc/boot/dts/mpc8569mds.dts +++ b/arch/powerpc/boot/dts/mpc8569mds.dts @@ -72,8 +72,30 @@ #size-cells = <1>; compatible = "cfi-flash"; reg = <0x0 0x0 0x02000000>; - bank-width = <2>; + bank-width = <1>; device-width = <1>; + partition@0 { + label = "ramdisk"; + reg = <0x00000000 0x01c00000>; + }; + partition@1c00000 { + label = "kernel"; + reg = <0x01c00000 0x002e0000>; + }; + partiton@1ee0000 { + label = "dtb"; + reg = <0x01ee0000 0x00020000>; + }; + partition@1f00000 { + label = "firmware"; + reg = <0x01f00000 0x00080000>; + read-only; + }; + partition@1f80000 { + label = "u-boot"; + reg = <0x01f80000 0x00080000>; + read-only; + }; }; bcsr@1,0 { -- cgit v1.1 From 8159df72d43e237d5bfcff052a8337245b6ac53e Mon Sep 17 00:00:00 2001 From: Heiko Schocher <hs@denx.de> Date: Mon, 15 Jun 2009 09:38:18 +0200 Subject: 83xx: add support for the kmeter1 board. The following series implements basic board support for the kmeter1 board from keymile, based on a MPC8360. This series provides the following functionality: - The board can boot with a serial console on UART1 - Ethernet: UCC1 in RGMII mode UCC2 in RGMII mode UCC4 in RMII mode UCC5 in RMII mode UCC6 in RMII mode UCC7 in RMII mode UCC8 in RMII mode following patch is necessary for working UCC in RMII mode: http://lists.ozlabs.org/pipermail/linuxppc-dev/2009-April/070804.html - Flash accessed via MTD layer On this hardware there is an Intel P30 flash, following patch series is necessary for working with this hardware: http://lists.ozlabs.org/pipermail/linuxppc-dev/2009-April/070624.html - I2C using I2C Bus 1 from the MPC8360 cpu Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> --- arch/powerpc/boot/dts/kmeter1.dts | 520 ++++++++++++++++ arch/powerpc/configs/83xx/kmeter1_defconfig | 908 ++++++++++++++++++++++++++++ arch/powerpc/platforms/83xx/Kconfig | 7 + arch/powerpc/platforms/83xx/Makefile | 1 + arch/powerpc/platforms/83xx/kmeter1.c | 191 ++++++ 5 files changed, 1627 insertions(+) create mode 100644 arch/powerpc/boot/dts/kmeter1.dts create mode 100644 arch/powerpc/configs/83xx/kmeter1_defconfig create mode 100644 arch/powerpc/platforms/83xx/kmeter1.c (limited to 'arch') diff --git a/arch/powerpc/boot/dts/kmeter1.dts b/arch/powerpc/boot/dts/kmeter1.dts new file mode 100644 index 0000000..167044f --- /dev/null +++ b/arch/powerpc/boot/dts/kmeter1.dts @@ -0,0 +1,520 @@ +/* + * Keymile KMETER1 Device Tree Source + * + * 2008 DENX Software Engineering GmbH + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "KMETER1"; + compatible = "keymile,KMETER1"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet_piggy2; + ethernet1 = &enet_estar1; + ethernet2 = &enet_estar2; + ethernet3 = &enet_eth1; + ethernet4 = &enet_eth2; + ethernet5 = &enet_eth3; + ethernet6 = &enet_eth4; + serial0 = &serial0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8360@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <32768>; // L1, 32K + i-cache-size = <32768>; // L1, 32K + timebase-frequency = <0>; /* Filled in by U-Boot */ + bus-frequency = <0>; /* Filled in by U-Boot */ + clock-frequency = <0>; /* Filled in by U-Boot */ + }; + }; + + memory { + device_type = "memory"; + reg = <0 0>; /* Filled in by U-Boot */ + }; + + soc8360@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8360-immr", "simple-bus"; + ranges = <0x0 0xe0000000 0x00200000>; + reg = <0xe0000000 0x00000200>; + bus-frequency = <0>; /* Filled in by U-Boot */ + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <264000000>; + interrupts = <9 0x8>; + interrupt-parent = <&ipic>; + }; + + dma@82a8 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8360-dma", "fsl,elo-dma"; + reg = <0x82a8 4>; + ranges = <0 0x8100 0x1a8>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel"; + reg = <0 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@80 { + compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel"; + reg = <0x80 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@100 { + compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel"; + reg = <0x100 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@180 { + compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel"; + reg = <0x180 0x28>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + }; + + ipic: pic@700 { + #address-cells = <0>; + #interrupt-cells = <2>; + compatible = "fsl,pq2pro-pic", "fsl,ipic"; + interrupt-controller; + reg = <0x700 0x100>; + }; + + par_io@1400 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1400 0x100>; + compatible = "fsl,mpc8360-par_io"; + num-ports = <7>; + + pio_ucc1: ucc_pin@0 { + reg = <0>; + + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0 1 3 0 2 0 /* MDIO */ + 0 2 1 0 1 0 /* MDC */ + + 0 3 1 0 1 0 /* TxD0 */ + 0 4 1 0 1 0 /* TxD1 */ + 0 5 1 0 1 0 /* TxD2 */ + 0 6 1 0 1 0 /* TxD3 */ + 0 9 2 0 1 0 /* RxD0 */ + 0 10 2 0 1 0 /* RxD1 */ + 0 11 2 0 1 0 /* RxD2 */ + 0 12 2 0 1 0 /* RxD3 */ + 0 7 1 0 1 0 /* TX_EN */ + 0 8 1 0 1 0 /* TX_ER */ + 0 15 2 0 1 0 /* RX_DV */ + 0 16 2 0 1 0 /* RX_ER */ + 0 0 2 0 1 0 /* RX_CLK */ + 2 9 1 0 3 0 /* GTX_CLK - CLK10 */ + 2 8 2 0 1 0 /* GTX125 - CLK9 */ + >; + }; + + pio_ucc2: ucc_pin@1 { + reg = <1>; + + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0 1 3 0 2 0 /* MDIO */ + 0 2 1 0 1 0 /* MDC */ + + 0 17 1 0 1 0 /* TxD0 */ + 0 18 1 0 1 0 /* TxD1 */ + 0 19 1 0 1 0 /* TxD2 */ + 0 20 1 0 1 0 /* TxD3 */ + 0 23 2 0 1 0 /* RxD0 */ + 0 24 2 0 1 0 /* RxD1 */ + 0 25 2 0 1 0 /* RxD2 */ + 0 26 2 0 1 0 /* RxD3 */ + 0 21 1 0 1 0 /* TX_EN */ + 0 22 1 0 1 0 /* TX_ER */ + 0 29 2 0 1 0 /* RX_DV */ + 0 30 2 0 1 0 /* RX_ER */ + 0 31 2 0 1 0 /* RX_CLK */ + 2 2 1 0 2 0 /* GTX_CLK - CLK3 */ + 2 3 2 0 1 0 /* GTX125 - CLK4 */ + >; + }; + + pio_ucc4: ucc_pin@3 { + reg = <3>; + + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0 1 3 0 2 0 /* MDIO */ + 0 2 1 0 1 0 /* MDC */ + + 1 14 1 0 1 0 /* TxD0 (PB14, out, f1) */ + 1 15 1 0 1 0 /* TxD1 (PB15, out, f1) */ + 1 20 2 0 1 0 /* RxD0 (PB20, in, f1) */ + 1 21 2 0 1 0 /* RxD1 (PB21, in, f1) */ + 1 18 1 0 1 0 /* TX_EN (PB18, out, f1) */ + 1 26 2 0 1 0 /* RX_DV (PB26, in, f1) */ + 1 27 2 0 1 0 /* RX_ER (PB27, in, f1) */ + + 2 16 2 0 1 0 /* UCC4_RMII_CLK (CLK17) */ + >; + }; + + pio_ucc5: ucc_pin@4 { + reg = <4>; + + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0 1 3 0 2 0 /* MDIO */ + 0 2 1 0 1 0 /* MDC */ + + 3 0 1 0 1 0 /* TxD0 (PD0, out, f1) */ + 3 1 1 0 1 0 /* TxD1 (PD1, out, f1) */ + 3 6 2 0 1 0 /* RxD0 (PD6, in, f1) */ + 3 7 2 0 1 0 /* RxD1 (PD7, in, f1) */ + 3 4 1 0 1 0 /* TX_EN (PD4, out, f1) */ + 3 12 2 0 1 0 /* RX_DV (PD12, in, f1) */ + 3 13 2 0 1 0 /* RX_ER (PD13, in, f1) */ + >; + }; + + pio_ucc6: ucc_pin@5 { + reg = <5>; + + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0 1 3 0 2 0 /* MDIO */ + 0 2 1 0 1 0 /* MDC */ + + 3 14 1 0 1 0 /* TxD0 (PD14, out, f1) */ + 3 15 1 0 1 0 /* TxD1 (PD15, out, f1) */ + 3 20 2 0 1 0 /* RxD0 (PD20, in, f1) */ + 3 21 2 0 1 0 /* RxD1 (PD21, in, f1) */ + 3 18 1 0 1 0 /* TX_EN (PD18, out, f1) */ + 3 26 2 0 1 0 /* RX_DV (PD26, in, f1) */ + 3 27 2 0 1 0 /* RX_ER (PD27, in, f1) */ + >; + }; + + pio_ucc7: ucc_pin@6 { + reg = <6>; + + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0 1 3 0 2 0 /* MDIO */ + 0 2 1 0 1 0 /* MDC */ + + 4 0 1 0 1 0 /* TxD0 (PE0, out, f1) */ + 4 1 1 0 1 0 /* TxD1 (PE1, out, f1) */ + 4 6 2 0 1 0 /* RxD0 (PE6, in, f1) */ + 4 7 2 0 1 0 /* RxD1 (PE7, in, f1) */ + 4 4 1 0 1 0 /* TX_EN (PE4, out, f1) */ + 4 12 2 0 1 0 /* RX_DV (PE12, in, f1) */ + 4 13 2 0 1 0 /* RX_ER (PE13, in, f1) */ + >; + }; + + pio_ucc8: ucc_pin@7 { + reg = <7>; + + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0 1 3 0 2 0 /* MDIO */ + 0 2 1 0 1 0 /* MDC */ + + 4 14 1 0 2 0 /* TxD0 (PE14, out, f2) */ + 4 15 1 0 1 0 /* TxD1 (PE15, out, f1) */ + 4 20 2 0 1 0 /* RxD0 (PE20, in, f1) */ + 4 21 2 0 1 0 /* RxD1 (PE21, in, f1) */ + 4 18 1 0 1 0 /* TX_EN (PE18, out, f1) */ + 4 26 2 0 1 0 /* RX_DV (PE26, in, f1) */ + 4 27 2 0 1 0 /* RX_ER (PE27, in, f1) */ + + 2 15 2 0 1 0 /* UCCx_RMII_CLK (CLK16) */ + >; + }; + + }; + + qe@100000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,qe"; + ranges = <0x0 0x100000 0x100000>; + reg = <0x100000 0x480>; + clock-frequency = <0>; /* Filled in by U-Boot */ + brg-frequency = <0>; /* Filled in by U-Boot */ + bus-frequency = <0>; /* Filled in by U-Boot */ + + muram@10000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,qe-muram", "fsl,cpm-muram"; + ranges = <0x0 0x00010000 0x0000c000>; + + data-only@0 { + compatible = "fsl,qe-muram-data", + "fsl,cpm-muram-data"; + reg = <0x0 0xc000>; + }; + }; + + /* ESTAR-1 (UCC1, MDIO 0x10, RGMII) */ + enet_estar1: ucc@2000 { + device_type = "network"; + compatible = "ucc_geth"; + cell-index = <1>; + reg = <0x2000 0x200>; + interrupts = <32>; + interrupt-parent = <&qeic>; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "none"; + tx-clock-name = "clk9"; + phy-handle = <&phy_estar1>; + phy-connection-type = "rgmii-id"; + pio-handle = <&pio_ucc1>; + }; + + /* ESTAR-2 (UCC2, MDIO 0x11, RGMII) */ + enet_estar2: ucc@3000 { + device_type = "network"; + compatible = "ucc_geth"; + cell-index = <2>; + reg = <0x3000 0x200>; + interrupts = <33>; + interrupt-parent = <&qeic>; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "none"; + tx-clock-name = "clk4"; + phy-handle = <&phy_estar2>; + phy-connection-type = "rgmii-id"; + pio-handle = <&pio_ucc2>; + }; + + /* Piggy2 (UCC4, MDIO 0x00, RMII) */ + enet_piggy2: ucc@3200 { + device_type = "network"; + compatible = "ucc_geth"; + cell-index = <4>; + reg = <0x3200 0x200>; + interrupts = <35>; + interrupt-parent = <&qeic>; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "none"; + tx-clock-name = "clk17"; + phy-handle = <&phy_piggy2>; + phy-connection-type = "rmii"; + pio-handle = <&pio_ucc4>; + }; + + /* Eth-1 (UCC5, MDIO 0x08, RMII) */ + enet_eth1: ucc@2400 { + device_type = "network"; + compatible = "ucc_geth"; + cell-index = <5>; + reg = <0x2400 0x200>; + interrupts = <40>; + interrupt-parent = <&qeic>; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "none"; + tx-clock-name = "clk16"; + phy-handle = <&phy_eth1>; + phy-connection-type = "rmii"; + pio-handle = <&pio_ucc5>; + }; + + /* Eth-2 (UCC6, MDIO 0x09, RMII) */ + enet_eth2: ucc@3400 { + device_type = "network"; + compatible = "ucc_geth"; + cell-index = <6>; + reg = <0x3400 0x200>; + interrupts = <41>; + interrupt-parent = <&qeic>; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "none"; + tx-clock-name = "clk16"; + phy-handle = <&phy_eth2>; + phy-connection-type = "rmii"; + pio-handle = <&pio_ucc6>; + }; + + /* Eth-3 (UCC7, MDIO 0x0a, RMII) */ + enet_eth3: ucc@2600 { + device_type = "network"; + compatible = "ucc_geth"; + cell-index = <7>; + reg = <0x2600 0x200>; + interrupts = <42>; + interrupt-parent = <&qeic>; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "none"; + tx-clock-name = "clk16"; + phy-handle = <&phy_eth3>; + phy-connection-type = "rmii"; + pio-handle = <&pio_ucc7>; + }; + + /* Eth-4 (UCC8, MDIO 0x0b, RMII) */ + enet_eth4: ucc@3600 { + device_type = "network"; + compatible = "ucc_geth"; + cell-index = <8>; + reg = <0x3600 0x200>; + interrupts = <43>; + interrupt-parent = <&qeic>; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "none"; + tx-clock-name = "clk16"; + phy-handle = <&phy_eth4>; + phy-connection-type = "rmii"; + pio-handle = <&pio_ucc8>; + }; + + mdio@3320 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3320 0x18>; + compatible = "fsl,ucc-mdio"; + + /* Piggy2 (UCC4, MDIO 0x00, RMII) */ + phy_piggy2: ethernet-phy@00 { + reg = <0x0>; + }; + + /* Eth-1 (UCC5, MDIO 0x08, RMII) */ + phy_eth1: ethernet-phy@08 { + reg = <0x08>; + }; + + /* Eth-2 (UCC6, MDIO 0x09, RMII) */ + phy_eth2: ethernet-phy@09 { + reg = <0x09>; + }; + + /* Eth-3 (UCC7, MDIO 0x0a, RMII) */ + phy_eth3: ethernet-phy@0a { + reg = <0x0a>; + }; + + /* Eth-4 (UCC8, MDIO 0x0b, RMII) */ + phy_eth4: ethernet-phy@0b { + reg = <0x0b>; + }; + + /* ESTAR-1 (UCC1, MDIO 0x10, RGMII) */ + phy_estar1: ethernet-phy@10 { + interrupt-parent = <&ipic>; + interrupts = <17 0x8>; + reg = <0x10>; + }; + + /* ESTAR-2 (UCC2, MDIO 0x11, RGMII) */ + phy_estar2: ethernet-phy@11 { + interrupt-parent = <&ipic>; + interrupts = <18 0x8>; + reg = <0x11>; + }; + }; + + qeic: interrupt-controller@80 { + interrupt-controller; + compatible = "fsl,qe-ic"; + #address-cells = <0>; + #interrupt-cells = <1>; + reg = <0x80 0x80>; + interrupts = <32 8 33 8>; + interrupt-parent = <&ipic>; + }; + }; + }; + + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8360-localbus", "fsl,pq2pro-localbus", + "simple-bus"; + reg = <0xe0005000 0xd8>; + ranges = <0 0 0xf0000000 0x04000000>; /* Filled in by U-Boot */ + + flash@f0000000,0 { + compatible = "cfi-flash"; + /* + * The Intel P30 chip has 2 non-identical chips on + * one die, so we need to define 2 seperate regions + * that are scanned by physmap_of independantly. + */ + reg = <0 0x00000000 0x02000000 + 0 0x02000000 0x02000000>; /* Filled in by U-Boot */ + bank-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "u-boot"; + reg = <0 0x40000>; + }; + partition@40000 { + label = "env"; + reg = <0x40000 0x40000>; + }; + partition@80000 { + label = "dtb"; + reg = <0x80000 0x20000>; + }; + partition@a0000 { + label = "kernel"; + reg = <0xa0000 0x300000>; + }; + partition@3a0000 { + label = "ramdisk"; + reg = <0x3a0000 0x800000>; + }; + partition@ba0000 { + label = "user"; + reg = <0xba0000 0x3460000>; + }; + }; + }; +}; diff --git a/arch/powerpc/configs/83xx/kmeter1_defconfig b/arch/powerpc/configs/83xx/kmeter1_defconfig new file mode 100644 index 0000000..bf0853f --- /dev/null +++ b/arch/powerpc/configs/83xx/kmeter1_defconfig @@ -0,0 +1,908 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.28 +# Fri Apr 3 10:34:33 2009 +# +# CONFIG_PPC64 is not set + +# +# Processor support +# +CONFIG_6xx=y +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_8xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_E200 is not set +CONFIG_PPC_FPU=y +# CONFIG_FSL_EMB_PERFMON is not set +# CONFIG_ALTIVEC is not set +CONFIG_PPC_STD_MMU=y +CONFIG_PPC_STD_MMU_32=y +# CONFIG_PPC_MM_SLICES is not set +# CONFIG_SMP is not set +CONFIG_PPC32=y +CONFIG_WORD_SIZE=32 +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set +CONFIG_MMU=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +# CONFIG_ARCH_NO_VIRT_TO_BUS is not set +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_OF=y +CONFIG_PPC_UDBG_16550=y +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +CONFIG_DEFAULT_UIMAGE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_PPC_DCR_NATIVE is not set +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_HOTPLUG is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set + +# +# Platform support +# +CONFIG_PPC_MULTIPLATFORM=y +CONFIG_CLASSIC32=y +# CONFIG_PPC_CHRP is not set +# CONFIG_MPC5121_ADS is not set +# CONFIG_MPC5121_GENERIC is not set +# CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_PMAC is not set +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PPC_82xx is not set +# CONFIG_PQ2ADS is not set +CONFIG_PPC_83xx=y +# CONFIG_MPC831x_RDB is not set +# CONFIG_MPC832x_MDS is not set +# CONFIG_MPC832x_RDB is not set +# CONFIG_MPC834x_MDS is not set +# CONFIG_MPC834x_ITX is not set +# CONFIG_MPC836x_MDS is not set +# CONFIG_MPC836x_RDK is not set +# CONFIG_MPC837x_MDS is not set +# CONFIG_MPC837x_RDB is not set +# CONFIG_SBC834x is not set +# CONFIG_ASP834x is not set +CONFIG_KMETER1=y +# CONFIG_PPC_86xx is not set +# CONFIG_EMBEDDED6xx is not set +CONFIG_IPIC=y +# CONFIG_MPIC is not set +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_TAU is not set +CONFIG_QUICC_ENGINE=y +# CONFIG_QE_GPIO is not set +# CONFIG_FSL_ULI1575 is not set + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_SCHED_HRTICK=y +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +# CONFIG_PREEMPT_RCU is not set +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_IOMMU_HELPER is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +# CONFIG_KEXEC is not set +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y +# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_FORCE_MAX_ZONEORDER=11 +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" +# CONFIG_PM is not set +# CONFIG_SECCOMP is not set +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_ISA_DMA=y +CONFIG_FSL_SOC=y +CONFIG_PPC_PCI_CHOICE=y +# CONFIG_PCI is not set +# CONFIG_PCI_DOMAINS is not set +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_HAS_RAPIDIO is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_TASK_SIZE=0xc0000000 +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +CONFIG_STP=m +CONFIG_BRIDGE=m +# CONFIG_NET_DSA is not set +CONFIG_VLAN_8021Q=y +# CONFIG_VLAN_8021Q_GVRP is not set +# CONFIG_DECNET is not set +CONFIG_LLC=m +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PHYSMAP_OF=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +CONFIG_MTD_PHRAM=y +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_RESERVE=1 +CONFIG_MTD_UBI_GLUEBI=y + +# +# UBI debugging options +# +CONFIG_MTD_UBI_DEBUG=y +# CONFIG_MTD_UBI_DEBUG_MSG is not set +# CONFIG_MTD_UBI_DEBUG_PARANOID is not set +# CONFIG_MTD_UBI_DEBUG_DISABLE_BGT is not set +# CONFIG_MTD_UBI_DEBUG_USERSPACE_IO is not set +# CONFIG_MTD_UBI_DEBUG_EMULATE_BITFLIPS is not set +# CONFIG_MTD_UBI_DEBUG_EMULATE_WRITE_FAILURES is not set +# CONFIG_MTD_UBI_DEBUG_EMULATE_ERASE_FAILURES is not set + +# +# Additional UBI debugging messages +# +# CONFIG_MTD_UBI_DEBUG_MSG_BLD is not set +# CONFIG_MTD_UBI_DEBUG_MSG_EBA is not set +# CONFIG_MTD_UBI_DEBUG_MSG_WL is not set +# CONFIG_MTD_UBI_DEBUG_MSG_IO is not set +CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_MACINTOSH_DRIVERS is not set +CONFIG_NETDEVICES=y +CONFIG_DUMMY=y +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=y +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +CONFIG_MARVELL_PHY=y +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y +# CONFIG_GIANFAR is not set +CONFIG_UCC_GETH=y +# CONFIG_UGETH_MAGIC_PACKET is not set +# CONFIG_UGETH_FILTERING is not set +# CONFIG_UGETH_TX_ON_DEMAND is not set +# CONFIG_MV643XX_ETH is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set +CONFIG_WAN=y +CONFIG_HDLC=y +# CONFIG_HDLC_RAW is not set +# CONFIG_HDLC_RAW_ETH is not set +# CONFIG_HDLC_CISCO is not set +# CONFIG_HDLC_FR is not set +# CONFIG_HDLC_PPP is not set + +# +# X.25/LAPB support is disabled +# +CONFIG_HDLC_KM=y +CONFIG_FS_UCC_HDLC=y +# CONFIG_DLCI is not set +CONFIG_PPP=y +CONFIG_PPP_MULTILINK=y +# CONFIG_PPP_FILTER is not set +# CONFIG_PPP_ASYNC is not set +# CONFIG_PPP_SYNC_TTY is not set +# CONFIG_PPP_DEFLATE is not set +# CONFIG_PPP_BSDCOMP is not set +# CONFIG_PPP_MPPE is not set +CONFIG_PPPOE=y +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=y +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_DEVKMEM is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_QE is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_BOOTCOUNT=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_MPC=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_AT24 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_MCU_MPC8349EMITX is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_REGULATOR is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_SOUND is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_EDAC is not set +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +CONFIG_UIO=y +# CONFIG_UIO_PDRV is not set +# CONFIG_UIO_PDRV_GENIRQ is not set +# CONFIG_UIO_SMX is not set +# CONFIG_UIO_SERCOS3 is not set +# CONFIG_STAGING is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_DNOTIFY is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +# CONFIG_PROC_KCORE is not set +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_UBIFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +# CONFIG_MSDOS_PARTITION is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +# CONFIG_NLS is not set +# CONFIG_DLM is not set +CONFIG_UCC_FAST=y +CONFIG_UCC=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_IRQSTACKS is not set +# CONFIG_VIRQ_DEBUG is not set +# CONFIG_BOOTX_TEXT is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set +# CONFIG_PPC_CLOCK is not set +CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig index 437d29a..083ebee 100644 --- a/arch/powerpc/platforms/83xx/Kconfig +++ b/arch/powerpc/platforms/83xx/Kconfig @@ -96,6 +96,13 @@ config ASP834x This enables support for the Analogue & Micro ASP 83xx board. +config KMETER1 + bool "Keymile KMETER1" + select DEFAULT_UIMAGE + select QUICC_ENGINE + help + This enables support for the Keymile KMETER1 board. + endif diff --git a/arch/powerpc/platforms/83xx/Makefile b/arch/powerpc/platforms/83xx/Makefile index 051777c..e139c36 100644 --- a/arch/powerpc/platforms/83xx/Makefile +++ b/arch/powerpc/platforms/83xx/Makefile @@ -15,3 +15,4 @@ obj-$(CONFIG_MPC837x_MDS) += mpc837x_mds.o obj-$(CONFIG_SBC834x) += sbc834x.o obj-$(CONFIG_MPC837x_RDB) += mpc837x_rdb.o obj-$(CONFIG_ASP834x) += asp834x.o +obj-$(CONFIG_KMETER1) += kmeter1.o diff --git a/arch/powerpc/platforms/83xx/kmeter1.c b/arch/powerpc/platforms/83xx/kmeter1.c new file mode 100644 index 0000000..903acfd --- /dev/null +++ b/arch/powerpc/platforms/83xx/kmeter1.c @@ -0,0 +1,191 @@ +/* + * Copyright 2008 DENX Software Engineering GmbH + * Author: Heiko Schocher <hs@denx.de> + * + * Description: + * Keymile KMETER1 board specific routines. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/reboot.h> +#include <linux/pci.h> +#include <linux/kdev_t.h> +#include <linux/major.h> +#include <linux/console.h> +#include <linux/delay.h> +#include <linux/seq_file.h> +#include <linux/root_dev.h> +#include <linux/initrd.h> +#include <linux/of_platform.h> +#include <linux/of_device.h> + +#include <asm/system.h> +#include <asm/atomic.h> +#include <asm/time.h> +#include <asm/io.h> +#include <asm/machdep.h> +#include <asm/ipic.h> +#include <asm/irq.h> +#include <asm/prom.h> +#include <asm/udbg.h> +#include <sysdev/fsl_soc.h> +#include <sysdev/fsl_pci.h> +#include <asm/qe.h> +#include <asm/qe_ic.h> + +#include "mpc83xx.h" + +#define SVR_REV(svr) (((svr) >> 0) & 0xFFFF) /* Revision field */ +/* ************************************************************************ + * + * Setup the architecture + * + */ +static void __init kmeter1_setup_arch(void) +{ + struct device_node *np; + + if (ppc_md.progress) + ppc_md.progress("kmeter1_setup_arch()", 0); + +#ifdef CONFIG_PCI + for_each_compatible_node(np, "pci", "fsl,mpc8349-pci") + mpc83xx_add_bridge(np); +#endif + +#ifdef CONFIG_QUICC_ENGINE + qe_reset(); + + np = of_find_node_by_name(NULL, "par_io"); + if (np != NULL) { + par_io_init(np); + of_node_put(np); + + for (np = NULL; (np = of_find_node_by_name(np, "ucc")) != NULL;) + par_io_of_config(np); + } + + np = of_find_compatible_node(NULL, "network", "ucc_geth"); + if (np != NULL) { + uint svid; + + /* handle mpc8360ea rev.2.1 erratum 2: RGMII Timing */ + svid = mfspr(SPRN_SVR); + if (SVR_REV(svid) == 0x0021) { + struct device_node *np_par; + struct resource res; + void __iomem *base; + int ret; + + np_par = of_find_node_by_name(NULL, "par_io"); + if (np_par == NULL) { + printk(KERN_WARNING "%s couldn;t find par_io node\n", + __func__); + return; + } + /* Map Parallel I/O ports registers */ + ret = of_address_to_resource(np_par, 0, &res); + if (ret) { + printk(KERN_WARNING "%s couldn;t map par_io registers\n", + __func__); + return; + } + base = ioremap(res.start, res.end - res.start + 1); + + /* + * IMMR + 0x14A8[4:5] = 11 (clk delay for UCC 2) + * IMMR + 0x14A8[18:19] = 11 (clk delay for UCC 1) + */ + setbits32((base + 0xa8), 0x0c003000); + + /* + * IMMR + 0x14AC[20:27] = 10101010 + * (data delay for both UCC's) + */ + clrsetbits_be32((base + 0xac), 0xff0, 0xaa0); + iounmap(base); + of_node_put(np_par); + } + of_node_put(np); + } +#endif /* CONFIG_QUICC_ENGINE */ +} + +static struct of_device_id kmeter_ids[] = { + { .type = "soc", }, + { .compatible = "soc", }, + { .compatible = "simple-bus", }, + { .type = "qe", }, + { .compatible = "fsl,qe", }, + {}, +}; + +static int __init kmeter_declare_of_platform_devices(void) +{ + /* Publish the QE devices */ + of_platform_bus_probe(NULL, kmeter_ids, NULL); + + return 0; +} +machine_device_initcall(kmeter1, kmeter_declare_of_platform_devices); + +static void __init kmeter1_init_IRQ(void) +{ + struct device_node *np; + + np = of_find_compatible_node(NULL, NULL, "fsl,pq2pro-pic"); + if (!np) { + np = of_find_node_by_type(NULL, "ipic"); + if (!np) + return; + } + + ipic_init(np, 0); + + /* Initialize the default interrupt mapping priorities, + * in case the boot rom changed something on us. + */ + ipic_set_default_priority(); + of_node_put(np); + +#ifdef CONFIG_QUICC_ENGINE + np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic"); + if (!np) { + np = of_find_node_by_type(NULL, "qeic"); + if (!np) + return; + } + qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic); + of_node_put(np); +#endif /* CONFIG_QUICC_ENGINE */ +} + +/* + * Called very early, MMU is off, device-tree isn't unflattened + */ +static int __init kmeter1_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "keymile,KMETER1"); +} + +define_machine(kmeter1) { + .name = "KMETER1", + .probe = kmeter1_probe, + .setup_arch = kmeter1_setup_arch, + .init_IRQ = kmeter1_init_IRQ, + .get_irq = ipic_get_irq, + .restart = mpc83xx_restart, + .time_init = mpc83xx_time_init, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; -- cgit v1.1 From 3038acf9091ff265609af3524ed94cce797d8485 Mon Sep 17 00:00:00 2001 From: Nate Case <ncase@xes-inc.com> Date: Thu, 11 Jun 2009 14:42:58 -0500 Subject: powerpc/85xx: Add platform support for X-ES MPC85xx boards Add support for X-ES single-board computers based on the Freescale MPC85xx processors. Signed-off-by: Nate Case <ncase@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> --- arch/powerpc/platforms/85xx/Kconfig | 10 ++ arch/powerpc/platforms/85xx/Makefile | 1 + arch/powerpc/platforms/85xx/xes_mpc85xx.c | 282 ++++++++++++++++++++++++++++++ 3 files changed, 293 insertions(+) create mode 100644 arch/powerpc/platforms/85xx/xes_mpc85xx.c (limited to 'arch') diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index 0ee5b12c..a9b4166 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -67,6 +67,16 @@ config KSI8560 help This option enables support for the Emerson KSI8560 board +config XES_MPC85xx + bool "X-ES single-board computer" + select DEFAULT_UIMAGE + help + This option enables support for the various single-board + computers from Extreme Engineering Solutions (X-ES) based on + Freescale MPC85xx processors. + Manufacturer: Extreme Engineering Solutions, Inc. + URL: <http://www.xes-inc.com/> + config STX_GP3 bool "Silicon Turnkey Express GP3" help diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile index a857b35..835733f 100644 --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile @@ -15,3 +15,4 @@ obj-$(CONFIG_SBC8560) += sbc8560.o obj-$(CONFIG_SBC8548) += sbc8548.o obj-$(CONFIG_SOCRATES) += socrates.o socrates_fpga_pic.o obj-$(CONFIG_KSI8560) += ksi8560.o +obj-$(CONFIG_XES_MPC85xx) += xes_mpc85xx.o \ No newline at end of file diff --git a/arch/powerpc/platforms/85xx/xes_mpc85xx.c b/arch/powerpc/platforms/85xx/xes_mpc85xx.c new file mode 100644 index 0000000..ee01532 --- /dev/null +++ b/arch/powerpc/platforms/85xx/xes_mpc85xx.c @@ -0,0 +1,282 @@ +/* + * Copyright (C) 2009 Extreme Engineering Solutions, Inc. + * + * X-ES board-specific functionality + * + * Based on mpc85xx_ds code from Freescale Semiconductor, Inc. + * + * Author: Nate Case <ncase@xes-inc.com> + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/kdev_t.h> +#include <linux/delay.h> +#include <linux/seq_file.h> +#include <linux/interrupt.h> +#include <linux/of_platform.h> + +#include <asm/system.h> +#include <asm/time.h> +#include <asm/machdep.h> +#include <asm/pci-bridge.h> +#include <mm/mmu_decl.h> +#include <asm/prom.h> +#include <asm/udbg.h> +#include <asm/mpic.h> + +#include <sysdev/fsl_soc.h> +#include <sysdev/fsl_pci.h> +#include <linux/of_platform.h> + +/* A few bit definitions needed for fixups on some boards */ +#define MPC85xx_L2CTL_L2E 0x80000000 /* L2 enable */ +#define MPC85xx_L2CTL_L2I 0x40000000 /* L2 flash invalidate */ +#define MPC85xx_L2CTL_L2SIZ_MASK 0x30000000 /* L2 SRAM size (R/O) */ + +void __init xes_mpc85xx_pic_init(void) +{ + struct mpic *mpic; + struct resource r; + struct device_node *np; + + np = of_find_node_by_type(NULL, "open-pic"); + if (np == NULL) { + printk(KERN_ERR "Could not find open-pic node\n"); + return; + } + + if (of_address_to_resource(np, 0, &r)) { + printk(KERN_ERR "Failed to map mpic register space\n"); + of_node_put(np); + return; + } + + mpic = mpic_alloc(np, r.start, + MPIC_PRIMARY | MPIC_WANTS_RESET | + MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS, + 0, 256, " OpenPIC "); + BUG_ON(mpic == NULL); + of_node_put(np); + + mpic_init(mpic); +} + +static void xes_mpc85xx_configure_l2(void __iomem *l2_base) +{ + volatile uint32_t ctl, tmp; + + asm volatile("msync; isync"); + tmp = in_be32(l2_base); + + /* + * xMon may have enabled part of L2 as SRAM, so we need to set it + * up for all cache mode just to be safe. + */ + printk(KERN_INFO "xes_mpc85xx: Enabling L2 as cache\n"); + + ctl = MPC85xx_L2CTL_L2E | MPC85xx_L2CTL_L2I; + if (machine_is_compatible("MPC8540") || + machine_is_compatible("MPC8560")) + /* + * Assume L2 SRAM is used fully for cache, so set + * L2BLKSZ (bits 4:5) to match L2SIZ (bits 2:3). + */ + ctl |= (tmp & MPC85xx_L2CTL_L2SIZ_MASK) >> 2; + + asm volatile("msync; isync"); + out_be32(l2_base, ctl); + asm volatile("msync; isync"); +} + +static void xes_mpc85xx_fixups(void) +{ + struct device_node *np; + int err; + + /* + * Legacy xMon firmware on some X-ES boards does not enable L2 + * as cache. We must ensure that they get enabled here. + */ + for_each_node_by_name(np, "l2-cache-controller") { + struct resource r[2]; + void __iomem *l2_base; + + /* Only MPC8548, MPC8540, and MPC8560 boards are affected */ + if (!of_device_is_compatible(np, + "fsl,mpc8548-l2-cache-controller") && + !of_device_is_compatible(np, + "fsl,mpc8540-l2-cache-controller") && + !of_device_is_compatible(np, + "fsl,mpc8560-l2-cache-controller")) + continue; + + err = of_address_to_resource(np, 0, &r[0]); + if (err) { + printk(KERN_WARNING "xes_mpc85xx: Could not get " + "resource for device tree node '%s'", + np->full_name); + continue; + } + + l2_base = ioremap(r[0].start, r[0].end - r[0].start + 1); + + xes_mpc85xx_configure_l2(l2_base); + } +} + +#ifdef CONFIG_PCI +static int primary_phb_addr; +#endif + +/* + * Setup the architecture + */ +#ifdef CONFIG_SMP +extern void __init mpc85xx_smp_init(void); +#endif +static void __init xes_mpc85xx_setup_arch(void) +{ +#ifdef CONFIG_PCI + struct device_node *np; +#endif + struct device_node *root; + const char *model = "Unknown"; + + root = of_find_node_by_path("/"); + if (root == NULL) + return; + + model = of_get_property(root, "model", NULL); + + printk(KERN_INFO "X-ES MPC85xx-based single-board computer: %s\n", + model + strlen("xes,")); + + xes_mpc85xx_fixups(); + +#ifdef CONFIG_PCI + for_each_node_by_type(np, "pci") { + if (of_device_is_compatible(np, "fsl,mpc8540-pci") || + of_device_is_compatible(np, "fsl,mpc8548-pcie")) { + struct resource rsrc; + of_address_to_resource(np, 0, &rsrc); + if ((rsrc.start & 0xfffff) == primary_phb_addr) + fsl_add_bridge(np, 1); + else + fsl_add_bridge(np, 0); + } + } +#endif + +#ifdef CONFIG_SMP + mpc85xx_smp_init(); +#endif +} + +static struct of_device_id __initdata xes_mpc85xx_ids[] = { + { .type = "soc", }, + { .compatible = "soc", }, + { .compatible = "simple-bus", }, + { .compatible = "gianfar", }, + {}, +}; + +static int __init xes_mpc85xx_publish_devices(void) +{ + return of_platform_bus_probe(NULL, xes_mpc85xx_ids, NULL); +} +machine_device_initcall(xes_mpc8572, xes_mpc85xx_publish_devices); +machine_device_initcall(xes_mpc8548, xes_mpc85xx_publish_devices); +machine_device_initcall(xes_mpc8540, xes_mpc85xx_publish_devices); + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init xes_mpc8572_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + if (of_flat_dt_is_compatible(root, "xes,MPC8572")) { +#ifdef CONFIG_PCI + primary_phb_addr = 0x8000; +#endif + return 1; + } else { + return 0; + } +} + +static int __init xes_mpc8548_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + if (of_flat_dt_is_compatible(root, "xes,MPC8548")) { +#ifdef CONFIG_PCI + primary_phb_addr = 0xb000; +#endif + return 1; + } else { + return 0; + } +} + +static int __init xes_mpc8540_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + if (of_flat_dt_is_compatible(root, "xes,MPC8540")) { +#ifdef CONFIG_PCI + primary_phb_addr = 0xb000; +#endif + return 1; + } else { + return 0; + } +} + +define_machine(xes_mpc8572) { + .name = "X-ES MPC8572", + .probe = xes_mpc8572_probe, + .setup_arch = xes_mpc85xx_setup_arch, + .init_IRQ = xes_mpc85xx_pic_init, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, +#endif + .get_irq = mpic_get_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; + +define_machine(xes_mpc8548) { + .name = "X-ES MPC8548", + .probe = xes_mpc8548_probe, + .setup_arch = xes_mpc85xx_setup_arch, + .init_IRQ = xes_mpc85xx_pic_init, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, +#endif + .get_irq = mpic_get_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; + +define_machine(xes_mpc8540) { + .name = "X-ES MPC8540", + .probe = xes_mpc8540_probe, + .setup_arch = xes_mpc85xx_setup_arch, + .init_IRQ = xes_mpc85xx_pic_init, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, +#endif + .get_irq = mpic_get_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; -- cgit v1.1 From 317bf653a6700b0ae34cef5028b287d5205bdaf1 Mon Sep 17 00:00:00 2001 From: Nate Case <ncase@xes-inc.com> Date: Thu, 11 Jun 2009 14:42:59 -0500 Subject: powerpc/85xx: Add dts files for X-ES MPC85xx boards Add device tree source files for various MPC85xx boards from Extreme Engineering Solutions. Supported boards include XPedite5370, XPedite5200, XPedite5301, XPedite5330, and XCalibur1501. Signed-off-by: Nate Case <ncase@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> --- arch/powerpc/boot/dts/xcalibur1501.dts | 696 ++++++++++++++++++++++++++++ arch/powerpc/boot/dts/xpedite5200.dts | 466 +++++++++++++++++++ arch/powerpc/boot/dts/xpedite5200_xmon.dts | 506 +++++++++++++++++++++ arch/powerpc/boot/dts/xpedite5301.dts | 640 ++++++++++++++++++++++++++ arch/powerpc/boot/dts/xpedite5330.dts | 707 +++++++++++++++++++++++++++++ arch/powerpc/boot/dts/xpedite5370.dts | 638 ++++++++++++++++++++++++++ 6 files changed, 3653 insertions(+) create mode 100644 arch/powerpc/boot/dts/xcalibur1501.dts create mode 100644 arch/powerpc/boot/dts/xpedite5200.dts create mode 100644 arch/powerpc/boot/dts/xpedite5200_xmon.dts create mode 100644 arch/powerpc/boot/dts/xpedite5301.dts create mode 100644 arch/powerpc/boot/dts/xpedite5330.dts create mode 100644 arch/powerpc/boot/dts/xpedite5370.dts (limited to 'arch') diff --git a/arch/powerpc/boot/dts/xcalibur1501.dts b/arch/powerpc/boot/dts/xcalibur1501.dts new file mode 100644 index 0000000..ac0a617 --- /dev/null +++ b/arch/powerpc/boot/dts/xcalibur1501.dts @@ -0,0 +1,696 @@ +/* + * Copyright (C) 2008 Extreme Engineering Solutions, Inc. + * Based on MPC8572DS device tree from Freescale Semiconductor, Inc. + * + * XCalibur1501 6U CompactPCI single-board computer based on MPC8572E + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +/ { + model = "xes,xcalibur1501"; + compatible = "xes,xcalibur1501", "xes,MPC8572"; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + serial0 = &serial0; + serial1 = &serial1; + pci2 = &pci2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8572@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + next-level-cache = <&L2>; + }; + + PowerPC,8572@1 { + device_type = "cpu"; + reg = <0x1>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x0>; // Filled in by U-Boot + }; + + localbus@ef005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus"; + reg = <0 0xef005000 0 0x1000>; + interrupts = <19 2>; + interrupt-parent = <&mpic>; + /* Local bus region mappings */ + ranges = <0 0 0 0xf8000000 0x8000000 /* CS0: Flash 1 */ + 1 0 0 0xf0000000 0x8000000 /* CS1: Flash 2 */ + 2 0 0 0xef800000 0x40000 /* CS2: NAND CE1 */ + 3 0 0 0xef840000 0x40000 /* CS3: NAND CE2 */ + 4 0 0 0xe9000000 0x100000>; /* CS4: USB */ + + nor-boot@0,0 { + compatible = "amd,s29gl01gp", "cfi-flash"; + bank-width = <2>; + reg = <0 0 0x8000000>; /* 128MB */ + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "Primary user space"; + reg = <0x00000000 0x6f00000>; /* 111 MB */ + }; + partition@6f00000 { + label = "Primary kernel"; + reg = <0x6f00000 0x1000000>; /* 16 MB */ + }; + partition@7f00000 { + label = "Primary DTB"; + reg = <0x7f00000 0x40000>; /* 256 KB */ + }; + partition@7f40000 { + label = "Primary U-Boot environment"; + reg = <0x7f40000 0x40000>; /* 256 KB */ + }; + partition@7f80000 { + label = "Primary U-Boot"; + reg = <0x7f80000 0x80000>; /* 512 KB */ + read-only; + }; + }; + + nor-alternate@1,0 { + compatible = "amd,s29gl01gp", "cfi-flash"; + bank-width = <2>; + //reg = <0xf0000000 0x08000000>; /* 128MB */ + reg = <1 0 0x8000000>; /* 128MB */ + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "Secondary user space"; + reg = <0x00000000 0x6f00000>; /* 111 MB */ + }; + partition@6f00000 { + label = "Secondary kernel"; + reg = <0x6f00000 0x1000000>; /* 16 MB */ + }; + partition@7f00000 { + label = "Secondary DTB"; + reg = <0x7f00000 0x40000>; /* 256 KB */ + }; + partition@7f40000 { + label = "Secondary U-Boot environment"; + reg = <0x7f40000 0x40000>; /* 256 KB */ + }; + partition@7f80000 { + label = "Secondary U-Boot"; + reg = <0x7f80000 0x80000>; /* 512 KB */ + read-only; + }; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + /* + * Actual part could be ST Micro NAND08GW3B2A (1 GB), + * Micron MT29F8G08DAA (2x 512 MB), or Micron + * MT29F16G08FAA (2x 1 GB), depending on the build + * configuration + */ + compatible = "fsl,mpc8572-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <2 0 0x40000>; + /* U-Boot should fix this up if chip size > 1 GB */ + partition@0 { + label = "NAND Filesystem"; + reg = <0 0x40000000>; + }; + }; + + usb@4,0 { + compatible = "nxp,usb-isp1761"; + reg = <4 0 0x100000>; + bus-width = <32>; + interrupt-parent = <&mpic>; + interrupts = <10 1>; + }; + }; + + soc8572@ef000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8572-immr", "simple-bus"; + ranges = <0x0 0 0xef000000 0x100000>; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,mpc8572-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8572-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + memory-controller@6000 { + compatible = "fsl,mpc8572-memory-controller"; + reg = <0x6000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8572-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x100000>; // L2, 1M + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + + temp-sensor@48 { + compatible = "dallas,ds1631", "dallas,ds1621"; + reg = <0x48>; + }; + + temp-sensor@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + + cpu-supervisor@51 { + compatible = "dallas,ds4510"; + reg = <0x51>; + }; + + eeprom@54 { + compatible = "atmel,at24c128b"; + reg = <0x54>; + }; + + rtc@68 { + compatible = "stm,m41t00", + "dallas,ds1338"; + reg = <0x68>; + }; + + pcie-switch@6a { + compatible = "plx,pex8648"; + reg = <0x6a>; + }; + + /* On-board signals for VID, flash, serial */ + gpio1: gpio@18 { + compatible = "nxp,pca9557"; + reg = <0x18>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + + /* PMC0/XMC0 signals */ + gpio2: gpio@1c { + compatible = "nxp,pca9557"; + reg = <0x1c>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + + /* PMC1/XMC1 signals */ + gpio3: gpio@1d { + compatible = "nxp,pca9557"; + reg = <0x1d>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + + /* CompactPCI signals (sysen, GA[4:0]) */ + gpio4: gpio@1e { + compatible = "nxp,pca9557"; + reg = <0x1e>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + + /* CompactPCI J5 GPIO and FAL/DEG/PRST */ + gpio5: gpio@1f { + compatible = "nxp,pca9557"; + reg = <0x1f>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + dma@c300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma"; + reg = <0xc300 0x4>; + ranges = <0x0 0xc100 0x200>; + cell-index = <1>; + dma-channel@0 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <76 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <77 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <78 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <79 2>; + }; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + /* eTSEC 1 front panel 0 */ + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + phy-connection-type = "sgmii"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <4 1>; + reg = <0x1>; + }; + phy1: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <4 1>; + reg = <0x2>; + }; + phy2: ethernet-phy@3 { + interrupt-parent = <&mpic>; + interrupts = <5 1>; + reg = <0x3>; + }; + phy3: ethernet-phy@4 { + interrupt-parent = <&mpic>; + interrupts = <5 1>; + reg = <0x4>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + /* eTSEC 2 front panel 1 */ + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 36 2 40 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + phy-connection-type = "sgmii"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + /* eTSEC 3 PICMG2.16 backplane port 0 */ + enet2: ethernet@26000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <2>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x26000 0x1000>; + ranges = <0x0 0x26000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <31 2 32 2 33 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi2>; + phy-handle = <&phy2>; + phy-connection-type = "sgmii"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + /* eTSEC 4 PICMG2.16 backplane port 1 */ + enet3: ethernet@27000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <3>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x27000 0x1000>; + ranges = <0x0 0x27000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <37 2 38 2 39 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi3>; + phy-handle = <&phy3>; + phy-connection-type = "sgmii"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi3: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + /* UART0 */ + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + /* UART1 */ + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + global-utilities@e0000 { //global utilities block + compatible = "fsl,mpc8572-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + + msi@41600 { + compatible = "fsl,mpc8572-msi", "fsl,mpic-msi"; + reg = <0x41600 0x80>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe0 0 + 0xe1 0 + 0xe2 0 + 0xe3 0 + 0xe4 0 + 0xe5 0 + 0xe6 0 + 0xe7 0>; + interrupt-parent = <&mpic>; + }; + + crypto@30000 { + compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2", + "fsl,sec2.1", "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2 58 2>; + interrupt-parent = <&mpic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x9fe>; + fsl,descriptor-types-mask = <0x3ab0ebf>; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + + gpio0: gpio@f000 { + compatible = "fsl,mpc8572-gpio"; + reg = <0xf000 0x1000>; + interrupts = <47 2>; + interrupt-parent = <&mpic>; + #gpio-cells = <2>; + gpio-controller; + }; + + gpio-leds { + compatible = "gpio-leds"; + + heartbeat { + label = "Heartbeat"; + gpios = <&gpio0 4 1>; + linux,default-trigger = "heartbeat"; + }; + + yellow { + label = "Yellow"; + gpios = <&gpio0 5 1>; + }; + + red { + label = "Red"; + gpios = <&gpio0 6 1>; + }; + + green { + label = "Green"; + gpios = <&gpio0 7 1>; + }; + }; + + /* PME (pattern-matcher) */ + pme@10000 { + compatible = "fsl,mpc8572-pme", "pme8572"; + reg = <0x10000 0x5000>; + interrupts = <57 2 64 2 65 2 66 2 67 2>; + interrupt-parent = <&mpic>; + }; + + tlu@2f000 { + compatible = "fsl,mpc8572-tlu", "fsl_tlu"; + reg = <0x2f000 0x1000>; + interupts = <61 2 >; + interrupt-parent = <&mpic>; + }; + + tlu@15000 { + compatible = "fsl,mpc8572-tlu", "fsl_tlu"; + reg = <0x15000 0x1000>; + interupts = <75 2>; + interrupt-parent = <&mpic>; + }; + }; + + /* + * PCI Express controller 3 @ ef008000 is not used. + * This would have been pci0 on other mpc85xx platforms. + * + * PCI Express controller 2 @ ef009000 is not used. + * This would have been pci1 on other mpc85xx platforms. + */ + + /* PCI Express controller 1, wired to PEX8648 PCIe switch */ + pci2: pcie@ef00a000 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0 0xef00a000 0 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x40000000 + 0x1000000 0x0 0x00000000 0 0xe8000000 0x0 0x10000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <26 2>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0x0 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x0 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x0 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x0 0x0 0x0 0x4 &mpic 0x3 0x1 + >; + pcie@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x40000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/xpedite5200.dts b/arch/powerpc/boot/dts/xpedite5200.dts new file mode 100644 index 0000000..a0cf53f --- /dev/null +++ b/arch/powerpc/boot/dts/xpedite5200.dts @@ -0,0 +1,466 @@ +/* + * Copyright (C) 2009 Extreme Engineering Solutions, Inc. + * Based on TQM8548 device tree + * + * XPedite5200 PrPMC/XMC module based on MPC8548E + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +/ { + model = "xes,xpedite5200"; + compatible = "xes,xpedite5200", "xes,MPC8548"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8548@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x0>; // Filled in by U-Boot + }; + + soc@ef000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0x0 0xef000000 0x100000>; + bus-frequency = <0>; + compatible = "fsl,mpc8548-immr", "simple-bus"; + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,mpc8548-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8548-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8548-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x80000>; // L2, 512K + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + /* On-card I2C */ + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + + /* + * Board GPIO: + * 0: BRD_CFG0 (1: P14 IO present) + * 1: BRD_CFG1 (1: FP ethernet present) + * 2: BRD_CFG2 (1: XMC IO present) + * 3: XMC root complex indicator + * 4: Flash boot device indicator + * 5: Flash write protect enable + * 6: PMC monarch indicator + * 7: PMC EREADY + */ + gpio1: gpio@18 { + compatible = "nxp,pca9556"; + reg = <0x18>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + + /* P14 GPIO */ + gpio2: gpio@19 { + compatible = "nxp,pca9556"; + reg = <0x19>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + + eeprom@50 { + compatible = "atmel,at24c16"; + reg = <0x50>; + }; + + rtc@68 { + compatible = "stm,m41t00", + "dallas,ds1338"; + reg = <0x68>; + }; + + dtt@48 { + compatible = "maxim,max1237"; + reg = <0x34>; + }; + }; + + /* Off-card I2C */ + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + /* eTSEC1: Front panel port 0 */ + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <0x1>; + }; + phy1: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <0x2>; + }; + phy2: ethernet-phy@3 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <0x3>; + }; + phy3: ethernet-phy@4 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <0x4>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + /* eTSEC2: Front panel port 1 */ + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 36 2 40 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + /* eTSEC3: Rear panel port 2 */ + enet2: ethernet@26000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <2>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x26000 0x1000>; + ranges = <0x0 0x26000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <31 2 32 2 33 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi2>; + phy-handle = <&phy2>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + /* eTSEC4: Rear panel port 3 */ + enet3: ethernet@27000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <3>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x27000 0x1000>; + ranges = <0x0 0x27000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <37 2 38 2 39 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi3>; + phy-handle = <&phy3>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi3: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + current-speed = <115200>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + current-speed = <115200>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + global-utilities@e0000 { // global utilities reg + compatible = "fsl,mpc8548-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + }; + + localbus@ef005000 { + compatible = "fsl,mpc8548-localbus", "fsl,pq3-localbus", + "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0xef005000 0x100>; // BRx, ORx, etc. + + ranges = < + 0 0x0 0xfc000000 0x04000000 // NOR boot flash + 1 0x0 0xf8000000 0x04000000 // NOR expansion flash + 2 0x0 0xef800000 0x00010000 // NAND CE1 + 3 0x0 0xef840000 0x00010000 // NAND CE2 + >; + + nor-boot@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0 0x0 0x4000000>; + bank-width = <2>; + + partition@0 { + label = "Primary OS"; + reg = <0x00000000 0x180000>; + }; + partition@180000 { + label = "Secondary OS"; + reg = <0x00180000 0x180000>; + }; + partition@300000 { + label = "User"; + reg = <0x00300000 0x3c80000>; + }; + partition@3f80000 { + label = "Boot firmware"; + reg = <0x03f80000 0x80000>; + }; + }; + + nor-alternate@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <1 0x0 0x4000000>; + bank-width = <2>; + + partition@0 { + label = "Filesystem"; + reg = <0x00000000 0x3f80000>; + }; + partition@3f80000 { + label = "Alternate boot firmware"; + reg = <0x03f80000 0x80000>; + }; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "xes,address-ctl-nand"; + reg = <2 0x0 0x10000>; + cle-line = <0x8>; /* CLE tied to A3 */ + ale-line = <0x10>; /* ALE tied to A4 */ + + /* U-Boot should fix this up */ + partition@0 { + label = "NAND Filesystem"; + reg = <0 0x40000000>; + }; + }; + }; + + /* PMC interface */ + pci0: pci@ef008000 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; + device_type = "pci"; + reg = <0xef008000 0x1000>; + clock-frequency = <33333333>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL */ + 0xe000 0 0 1 &mpic 2 1 + 0xe000 0 0 2 &mpic 3 1>; + + interrupt-parent = <&mpic>; + interrupts = <24 2>; + bus-range = <0 0>; + ranges = <0x02000000 0 0x80000000 0x80000000 0 0x40000000 + 0x01000000 0 0x00000000 0xe8000000 0 0x00800000>; + }; + + /* XMC PCIe is not yet enabled in U-Boot on XPedite5200 */ +}; diff --git a/arch/powerpc/boot/dts/xpedite5200_xmon.dts b/arch/powerpc/boot/dts/xpedite5200_xmon.dts new file mode 100644 index 0000000..c5b2975 --- /dev/null +++ b/arch/powerpc/boot/dts/xpedite5200_xmon.dts @@ -0,0 +1,506 @@ +/* + * Copyright (C) 2009 Extreme Engineering Solutions, Inc. + * Based on TQM8548 device tree + * + * XPedite5200 PrPMC/XMC module based on MPC8548E. This dts is for the + * xMon boot loader memory map which differs from U-Boot's. + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +/ { + model = "xes,xpedite5200"; + compatible = "xes,xpedite5200", "xes,MPC8548"; + #address-cells = <1>; + #size-cells = <1>; + form-factor = "PMC/XMC"; + boot-bank = <0x0>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8548@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x0>; // Filled in by boot loader + }; + + soc@ef000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0x0 0xef000000 0x100000>; + bus-frequency = <0>; + compatible = "fsl,mpc8548-immr", "simple-bus"; + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,mpc8548-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8548-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8548-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x80000>; // L2, 512K + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + /* On-card I2C */ + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + + /* + * Board GPIO: + * 0: BRD_CFG0 (1: P14 IO present) + * 1: BRD_CFG1 (1: FP ethernet present) + * 2: BRD_CFG2 (1: XMC IO present) + * 3: XMC root complex indicator + * 4: Flash boot device indicator + * 5: Flash write protect enable + * 6: PMC monarch indicator + * 7: PMC EREADY + */ + gpio1: gpio@18 { + compatible = "nxp,pca9556"; + reg = <0x18>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + + /* P14 GPIO */ + gpio2: gpio@19 { + compatible = "nxp,pca9556"; + reg = <0x19>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + + eeprom@50 { + compatible = "atmel,at24c16"; + reg = <0x50>; + }; + + rtc@68 { + compatible = "stm,m41t00", + "dallas,ds1338"; + reg = <0x68>; + }; + + dtt@48 { + compatible = "maxim,max1237"; + reg = <0x34>; + }; + }; + + /* Off-card I2C */ + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + /* eTSEC1: Front panel port 0 */ + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <0x1>; + }; + phy1: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <0x2>; + }; + phy2: ethernet-phy@3 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <0x3>; + }; + phy3: ethernet-phy@4 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <0x4>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + /* eTSEC2: Front panel port 1 */ + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 36 2 40 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + /* eTSEC3: Rear panel port 2 */ + enet2: ethernet@26000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <2>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x26000 0x1000>; + ranges = <0x0 0x26000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <31 2 32 2 33 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi2>; + phy-handle = <&phy2>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + /* eTSEC4: Rear panel port 3 */ + enet3: ethernet@27000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <3>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x27000 0x1000>; + ranges = <0x0 0x27000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <37 2 38 2 39 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi3>; + phy-handle = <&phy3>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi3: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + current-speed = <9600>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + current-speed = <9600>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + global-utilities@e0000 { // global utilities reg + compatible = "fsl,mpc8548-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + }; + + localbus@ef005000 { + compatible = "fsl,mpc8548-localbus", "fsl,pq3-localbus", + "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0xef005000 0x100>; // BRx, ORx, etc. + + ranges = < + 0 0x0 0xf8000000 0x08000000 // NOR boot flash + 1 0x0 0xf0000000 0x08000000 // NOR expansion flash + 2 0x0 0xe8000000 0x00010000 // NAND CE1 + 3 0x0 0xe8010000 0x00010000 // NAND CE2 + >; + + nor-boot@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0 0x0 0x4000000>; + bank-width = <2>; + + partition@0 { + label = "Primary OS"; + reg = <0x00000000 0x180000>; + }; + partition@180000 { + label = "Secondary OS"; + reg = <0x00180000 0x180000>; + }; + partition@300000 { + label = "User"; + reg = <0x00300000 0x3c80000>; + }; + partition@3f80000 { + label = "Boot firmware"; + reg = <0x03f80000 0x80000>; + }; + }; + + nor-alternate@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <1 0x0 0x4000000>; + bank-width = <2>; + + partition@0 { + label = "Filesystem"; + reg = <0x00000000 0x3f80000>; + }; + partition@3f80000 { + label = "Alternate boot firmware"; + reg = <0x03f80000 0x80000>; + }; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "xes,address-ctl-nand"; + reg = <2 0x0 0x10000>; + cle-line = <0x8>; /* CLE tied to A3 */ + ale-line = <0x10>; /* ALE tied to A4 */ + + partition@0 { + label = "NAND Filesystem"; + reg = <0 0x40000000>; + }; + }; + }; + + /* PMC interface */ + pci0: pci@ef008000 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; + device_type = "pci"; + reg = <0xef008000 0x1000>; + clock-frequency = <33333333>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL */ + 0xe000 0 0 1 &mpic 2 1 + 0xe000 0 0 2 &mpic 3 1>; + + interrupt-parent = <&mpic>; + interrupts = <24 2>; + bus-range = <0 0>; + ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000 + 0x01000000 0 0x00000000 0xd0000000 0 0x01000000>; + }; + + /* XMC PCIe */ + pci1: pcie@ef00a000 { + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0x00000 0 0 1 &mpic 0 1 + 0x00000 0 0 2 &mpic 1 1 + 0x00000 0 0 3 &mpic 2 1 + 0x00000 0 0 4 &mpic 3 1>; + + interrupt-parent = <&mpic>; + interrupts = <26 2>; + bus-range = <0 0xff>; + ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x20000000 + 0x01000000 0 0x00000000 0xd1000000 0 0x01000000>; + clock-frequency = <33333333>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xef00a000 0x1000>; + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + pcie@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x02000000 0 0xc0000000 0x02000000 0 + 0xc0000000 0 0x20000000 + 0x01000000 0 0x00000000 0x01000000 0 + 0x00000000 0 0x08000000>; + }; + }; + + /* Needed for dtbImage boot wrapper compatibility */ + chosen { + linux,stdout-path = &serial0; + }; +}; diff --git a/arch/powerpc/boot/dts/xpedite5301.dts b/arch/powerpc/boot/dts/xpedite5301.dts new file mode 100644 index 0000000..db7faf5 --- /dev/null +++ b/arch/powerpc/boot/dts/xpedite5301.dts @@ -0,0 +1,640 @@ +/* + * Copyright (C) 2008 Extreme Engineering Solutions, Inc. + * Based on MPC8572DS device tree from Freescale Semiconductor, Inc. + * + * XPedite5301 PMC/XMC module based on MPC8572E + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +/ { + model = "xes,xpedite5301"; + compatible = "xes,xpedite5301", "xes,MPC8572"; + #address-cells = <2>; + #size-cells = <2>; + form-factor = "PMC/XMC"; + boot-bank = <0x0>; /* 0: Primary flash, 1: Secondary flash */ + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci1 = &pci1; + pci2 = &pci2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8572@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + next-level-cache = <&L2>; + }; + + PowerPC,8572@1 { + device_type = "cpu"; + reg = <0x1>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x0>; // Filled in by U-Boot + }; + + localbus@ef005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus"; + reg = <0 0xef005000 0 0x1000>; + interrupts = <19 2>; + interrupt-parent = <&mpic>; + /* Local bus region mappings */ + ranges = <0 0 0 0xf8000000 0x8000000 /* CS0: Boot flash */ + 1 0 0 0xf0000000 0x8000000 /* CS1: Alternate flash */ + 2 0 0 0xef800000 0x40000 /* CS2: NAND CE1 */ + 3 0 0 0xef840000 0x40000>; /* CS3: NAND CE2 */ + + nor-boot@0,0 { + compatible = "amd,s29gl01gp", "cfi-flash"; + bank-width = <2>; + reg = <0 0 0x8000000>; /* 128MB */ + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "Primary user space"; + reg = <0x00000000 0x6f00000>; /* 111 MB */ + }; + partition@6f00000 { + label = "Primary kernel"; + reg = <0x6f00000 0x1000000>; /* 16 MB */ + }; + partition@7f00000 { + label = "Primary DTB"; + reg = <0x7f00000 0x40000>; /* 256 KB */ + }; + partition@7f40000 { + label = "Primary U-Boot environment"; + reg = <0x7f40000 0x40000>; /* 256 KB */ + }; + partition@7f80000 { + label = "Primary U-Boot"; + reg = <0x7f80000 0x80000>; /* 512 KB */ + read-only; + }; + }; + + nor-alternate@1,0 { + compatible = "amd,s29gl01gp", "cfi-flash"; + bank-width = <2>; + //reg = <0xf0000000 0x08000000>; /* 128MB */ + reg = <1 0 0x8000000>; /* 128MB */ + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "Secondary user space"; + reg = <0x00000000 0x6f00000>; /* 111 MB */ + }; + partition@6f00000 { + label = "Secondary kernel"; + reg = <0x6f00000 0x1000000>; /* 16 MB */ + }; + partition@7f00000 { + label = "Secondary DTB"; + reg = <0x7f00000 0x40000>; /* 256 KB */ + }; + partition@7f40000 { + label = "Secondary U-Boot environment"; + reg = <0x7f40000 0x40000>; /* 256 KB */ + }; + partition@7f80000 { + label = "Secondary U-Boot"; + reg = <0x7f80000 0x80000>; /* 512 KB */ + read-only; + }; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + /* + * Actual part could be ST Micro NAND08GW3B2A (1 GB), + * Micron MT29F8G08DAA (2x 512 MB), or Micron + * MT29F16G08FAA (2x 1 GB), depending on the build + * configuration + */ + compatible = "fsl,mpc8572-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <2 0 0x40000>; + /* U-Boot should fix this up if chip size > 1 GB */ + partition@0 { + label = "NAND Filesystem"; + reg = <0 0x40000000>; + }; + }; + + }; + + soc8572@ef000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8572-immr", "simple-bus"; + ranges = <0x0 0 0xef000000 0x100000>; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,mpc8572-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8572-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + memory-controller@6000 { + compatible = "fsl,mpc8572-memory-controller"; + reg = <0x6000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8572-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x100000>; // L2, 1M + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + + temp-sensor@48 { + compatible = "dallas,ds1631", "dallas,ds1621"; + reg = <0x48>; + }; + + temp-sensor@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + + cpu-supervisor@51 { + compatible = "dallas,ds4510"; + reg = <0x51>; + }; + + eeprom@54 { + compatible = "atmel,at24c128b"; + reg = <0x54>; + }; + + rtc@68 { + compatible = "stm,m41t00", + "dallas,ds1338"; + reg = <0x68>; + }; + + pcie-switch@70 { + compatible = "plx,pex8518"; + reg = <0x70>; + }; + + gpio1: gpio@18 { + compatible = "nxp,pca9557"; + reg = <0x18>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + + gpio2: gpio@1c { + compatible = "nxp,pca9557"; + reg = <0x1c>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + + gpio3: gpio@1e { + compatible = "nxp,pca9557"; + reg = <0x1e>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + + gpio4: gpio@1f { + compatible = "nxp,pca9557"; + reg = <0x1f>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + dma@c300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma"; + reg = <0xc300 0x4>; + ranges = <0x0 0xc100 0x200>; + cell-index = <1>; + dma-channel@0 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <76 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <77 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <78 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <79 2>; + }; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + /* eTSEC 1 */ + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + phy-connection-type = "sgmii"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <0x1>; + }; + phy1: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <0x2>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + /* eTSEC 2 */ + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 36 2 40 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + phy-connection-type = "sgmii"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + /* UART0 */ + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + /* UART1 */ + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + global-utilities@e0000 { //global utilities block + compatible = "fsl,mpc8572-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + + msi@41600 { + compatible = "fsl,mpc8572-msi", "fsl,mpic-msi"; + reg = <0x41600 0x80>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe0 0 + 0xe1 0 + 0xe2 0 + 0xe3 0 + 0xe4 0 + 0xe5 0 + 0xe6 0 + 0xe7 0>; + interrupt-parent = <&mpic>; + }; + + crypto@30000 { + compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2", + "fsl,sec2.1", "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2 58 2>; + interrupt-parent = <&mpic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x9fe>; + fsl,descriptor-types-mask = <0x3ab0ebf>; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + + gpio0: gpio@f000 { + compatible = "fsl,mpc8572-gpio"; + reg = <0xf000 0x1000>; + interrupts = <47 2>; + interrupt-parent = <&mpic>; + #gpio-cells = <2>; + gpio-controller; + }; + + gpio-leds { + compatible = "gpio-leds"; + + heartbeat { + label = "Heartbeat"; + gpios = <&gpio0 4 1>; + linux,default-trigger = "heartbeat"; + }; + + yellow { + label = "Yellow"; + gpios = <&gpio0 5 1>; + }; + + red { + label = "Red"; + gpios = <&gpio0 6 1>; + }; + + green { + label = "Green"; + gpios = <&gpio0 7 1>; + }; + }; + + /* PME (pattern-matcher) */ + pme@10000 { + compatible = "fsl,mpc8572-pme", "pme8572"; + reg = <0x10000 0x5000>; + interrupts = <57 2 64 2 65 2 66 2 67 2>; + interrupt-parent = <&mpic>; + }; + + tlu@2f000 { + compatible = "fsl,mpc8572-tlu", "fsl_tlu"; + reg = <0x2f000 0x1000>; + interupts = <61 2 >; + interrupt-parent = <&mpic>; + }; + + tlu@15000 { + compatible = "fsl,mpc8572-tlu", "fsl_tlu"; + reg = <0x15000 0x1000>; + interupts = <75 2>; + interrupt-parent = <&mpic>; + }; + }; + + /* + * PCI Express controller 3 @ ef008000 is not used. + * This would have been pci0 on other mpc85xx platforms. + */ + + /* PCI Express controller 2, wired to XMC P15 connector */ + pci1: pcie@ef009000 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0 0xef009000 0 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x10000000 + 0x1000000 0x0 0x00000000 0 0xe8800000 0x0 0x00010000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <25 2>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0x0 0x0 0x0 0x1 &mpic 0x4 0x1 + 0x0 0x0 0x0 0x2 &mpic 0x5 0x1 + 0x0 0x0 0x0 0x3 &mpic 0x6 0x1 + 0x0 0x0 0x0 0x4 &mpic 0x7 0x1 + >; + pcie@0 { + reg = <0x00000000 0x00000000 0x00000000 0x00000000 0x00000000>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x10000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + /* PCI Express controller 1, wired to PEX8112 for PMC interface */ + pci2: pcie@ef00a000 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0 0xef00a000 0 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x40000000 + 0x1000000 0x0 0x00000000 0 0xe8000000 0x0 0x10000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <26 2>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0x0 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x0 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x0 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x0 0x0 0x0 0x4 &mpic 0x3 0x1 + >; + pcie@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x40000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/xpedite5330.dts b/arch/powerpc/boot/dts/xpedite5330.dts new file mode 100644 index 0000000..c364ca6 --- /dev/null +++ b/arch/powerpc/boot/dts/xpedite5330.dts @@ -0,0 +1,707 @@ +/* + * Copyright (C) 2008 Extreme Engineering Solutions, Inc. + * Based on MPC8572DS device tree from Freescale Semiconductor, Inc. + * + * XPedite5330 3U CompactPCI module based on MPC8572E + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +/ { + model = "xes,xpedite5330"; + compatible = "xes,xpedite5330", "xes,MPC8572"; + #address-cells = <2>; + #size-cells = <2>; + form-factor = "3U CompactPCI"; + boot-bank = <0x0>; /* 0: Primary flash, 1: Secondary flash */ + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + }; + + pmcslots { + #address-cells = <1>; + #size-cells = <0>; + + pmcslot@0 { + cell-index = <0>; + /* + * boolean properties (true if defined): + * monarch; + * module-present; + */ + }; + }; + + xmcslots { + #address-cells = <1>; + #size-cells = <0>; + + xmcslot@0 { + cell-index = <0>; + /* + * boolean properties (true if defined): + * module-present; + */ + }; + }; + + cpci { + /* + * boolean properties (true if defined): + * system-controller; + */ + system-controller; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8572@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + next-level-cache = <&L2>; + }; + + PowerPC,8572@1 { + device_type = "cpu"; + reg = <0x1>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x0>; // Filled in by U-Boot + }; + + localbus@ef005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus"; + reg = <0 0xef005000 0 0x1000>; + interrupts = <19 2>; + interrupt-parent = <&mpic>; + /* Local bus region mappings */ + ranges = <0 0 0 0xf8000000 0x8000000 /* CS0: Boot flash */ + 1 0 0 0xf0000000 0x8000000 /* CS1: Alternate flash */ + 2 0 0 0xef800000 0x40000 /* CS2: NAND CE1 */ + 3 0 0 0xef840000 0x40000>; /* CS3: NAND CE2 */ + + nor-boot@0,0 { + compatible = "amd,s29gl01gp", "cfi-flash"; + bank-width = <2>; + reg = <0 0 0x8000000>; /* 128MB */ + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "Primary user space"; + reg = <0x00000000 0x6f00000>; /* 111 MB */ + }; + partition@6f00000 { + label = "Primary kernel"; + reg = <0x6f00000 0x1000000>; /* 16 MB */ + }; + partition@7f00000 { + label = "Primary DTB"; + reg = <0x7f00000 0x40000>; /* 256 KB */ + }; + partition@7f40000 { + label = "Primary U-Boot environment"; + reg = <0x7f40000 0x40000>; /* 256 KB */ + }; + partition@7f80000 { + label = "Primary U-Boot"; + reg = <0x7f80000 0x80000>; /* 512 KB */ + read-only; + }; + }; + + nor-alternate@1,0 { + compatible = "amd,s29gl01gp", "cfi-flash"; + bank-width = <2>; + //reg = <0xf0000000 0x08000000>; /* 128MB */ + reg = <1 0 0x8000000>; /* 128MB */ + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "Secondary user space"; + reg = <0x00000000 0x6f00000>; /* 111 MB */ + }; + partition@6f00000 { + label = "Secondary kernel"; + reg = <0x6f00000 0x1000000>; /* 16 MB */ + }; + partition@7f00000 { + label = "Secondary DTB"; + reg = <0x7f00000 0x40000>; /* 256 KB */ + }; + partition@7f40000 { + label = "Secondary U-Boot environment"; + reg = <0x7f40000 0x40000>; /* 256 KB */ + }; + partition@7f80000 { + label = "Secondary U-Boot"; + reg = <0x7f80000 0x80000>; /* 512 KB */ + read-only; + }; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + /* + * Actual part could be ST Micro NAND08GW3B2A (1 GB), + * Micron MT29F8G08DAA (2x 512 MB), or Micron + * MT29F16G08FAA (2x 1 GB), depending on the build + * configuration + */ + compatible = "fsl,mpc8572-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <2 0 0x40000>; + /* U-Boot should fix this up if chip size > 1 GB */ + partition@0 { + label = "NAND Filesystem"; + reg = <0 0x40000000>; + }; + }; + + }; + + soc8572@ef000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8572-immr", "simple-bus"; + ranges = <0x0 0 0xef000000 0x100000>; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,mpc8572-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8572-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + memory-controller@6000 { + compatible = "fsl,mpc8572-memory-controller"; + reg = <0x6000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8572-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x100000>; // L2, 1M + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + + temp-sensor@48 { + compatible = "dallas,ds1631", "dallas,ds1621"; + reg = <0x48>; + }; + + temp-sensor@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + + cpu-supervisor@51 { + compatible = "dallas,ds4510"; + reg = <0x51>; + }; + + eeprom@54 { + compatible = "atmel,at24c128b"; + reg = <0x54>; + }; + + rtc@68 { + compatible = "stm,m41t00", + "dallas,ds1338"; + reg = <0x68>; + }; + + pcie-switch@70 { + compatible = "plx,pex8518"; + reg = <0x70>; + }; + + gpio1: gpio@18 { + compatible = "nxp,pca9557"; + reg = <0x18>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + + gpio2: gpio@1c { + compatible = "nxp,pca9557"; + reg = <0x1c>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + + gpio3: gpio@1e { + compatible = "nxp,pca9557"; + reg = <0x1e>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + + gpio4: gpio@1f { + compatible = "nxp,pca9557"; + reg = <0x1f>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + dma@c300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma"; + reg = <0xc300 0x4>; + ranges = <0x0 0xc100 0x200>; + cell-index = <1>; + dma-channel@0 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <76 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <77 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <78 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <79 2>; + }; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + /* eTSEC 1 */ + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + phy-connection-type = "sgmii"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <0x1>; + }; + phy1: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <0x2>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + /* eTSEC 2 */ + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 36 2 40 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + phy-connection-type = "sgmii"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + /* UART0 */ + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + /* UART1 */ + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + global-utilities@e0000 { //global utilities block + compatible = "fsl,mpc8572-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + + msi@41600 { + compatible = "fsl,mpc8572-msi", "fsl,mpic-msi"; + reg = <0x41600 0x80>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe0 0 + 0xe1 0 + 0xe2 0 + 0xe3 0 + 0xe4 0 + 0xe5 0 + 0xe6 0 + 0xe7 0>; + interrupt-parent = <&mpic>; + }; + + crypto@30000 { + compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2", + "fsl,sec2.1", "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2 58 2>; + interrupt-parent = <&mpic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x9fe>; + fsl,descriptor-types-mask = <0x3ab0ebf>; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + + gpio0: gpio@f000 { + compatible = "fsl,mpc8572-gpio"; + reg = <0xf000 0x1000>; + interrupts = <47 2>; + interrupt-parent = <&mpic>; + #gpio-cells = <2>; + gpio-controller; + }; + + gpio-leds { + compatible = "gpio-leds"; + + heartbeat { + label = "Heartbeat"; + gpios = <&gpio0 4 1>; + linux,default-trigger = "heartbeat"; + }; + + yellow { + label = "Yellow"; + gpios = <&gpio0 5 1>; + }; + + red { + label = "Red"; + gpios = <&gpio0 6 1>; + }; + + green { + label = "Green"; + gpios = <&gpio0 7 1>; + }; + }; + + /* PME (pattern-matcher) */ + pme@10000 { + compatible = "fsl,mpc8572-pme", "pme8572"; + reg = <0x10000 0x5000>; + interrupts = <57 2 64 2 65 2 66 2 67 2>; + interrupt-parent = <&mpic>; + }; + + tlu@2f000 { + compatible = "fsl,mpc8572-tlu", "fsl_tlu"; + reg = <0x2f000 0x1000>; + interupts = <61 2 >; + interrupt-parent = <&mpic>; + }; + + tlu@15000 { + compatible = "fsl,mpc8572-tlu", "fsl_tlu"; + reg = <0x15000 0x1000>; + interupts = <75 2>; + interrupt-parent = <&mpic>; + }; + }; + + /* PCI Express controller 3 - CompactPCI bus via PEX8112 bridge */ + pci0: pcie@ef008000 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0 0xef008000 0 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0xe0000000 0 0xe0000000 0x0 0x10000000 + 0x1000000 0x0 0x00000000 0 0xe9000000 0x0 0x10000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <24 2>; + interrupt-map-mask = <0xff00 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x0 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x0 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x0 0x0 0x0 0x4 &mpic 0x3 0x1 + >; + pcie@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x02000000 0x0 0xe0000000 + 0x02000000 0x0 0xe0000000 + 0x0 0x10000000 + + 0x01000000 0x0 0x0 + 0x01000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + /* PCI Express controller 2, PMC module via PEX8112 bridge */ + pci1: pcie@ef009000 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0 0xef009000 0 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x10000000 + 0x1000000 0x0 0x00000000 0 0xe8800000 0x0 0x10000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <25 2>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0x0 0x0 0x0 0x1 &mpic 0x4 0x1 + 0x0 0x0 0x0 0x2 &mpic 0x5 0x1 + 0x0 0x0 0x0 0x3 &mpic 0x6 0x1 + 0x0 0x0 0x0 0x4 &mpic 0x7 0x1 + >; + pcie@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x10000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + /* PCI Express controller 1, XMC P15 */ + pci2: pcie@ef00a000 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0 0xef00a000 0 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x40000000 + 0x1000000 0x0 0x00000000 0 0xe8000000 0x0 0x10000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <26 2>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0x0 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x0 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x0 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x0 0x0 0x0 0x4 &mpic 0x3 0x1 + >; + pcie@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x40000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/xpedite5370.dts b/arch/powerpc/boot/dts/xpedite5370.dts new file mode 100644 index 0000000..7a8a4afd --- /dev/null +++ b/arch/powerpc/boot/dts/xpedite5370.dts @@ -0,0 +1,638 @@ +/* + * Copyright (C) 2008 Extreme Engineering Solutions, Inc. + * Based on MPC8572DS device tree from Freescale Semiconductor, Inc. + * + * XPedite5370 3U VPX single-board computer based on MPC8572E + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +/ { + model = "xes,xpedite5370"; + compatible = "xes,xpedite5370", "xes,MPC8572"; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci1 = &pci1; + pci2 = &pci2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8572@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + next-level-cache = <&L2>; + }; + + PowerPC,8572@1 { + device_type = "cpu"; + reg = <0x1>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x0>; // Filled in by U-Boot + }; + + localbus@ef005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus"; + reg = <0 0xef005000 0 0x1000>; + interrupts = <19 2>; + interrupt-parent = <&mpic>; + /* Local bus region mappings */ + ranges = <0 0 0 0xf8000000 0x8000000 /* CS0: Boot flash */ + 1 0 0 0xf0000000 0x8000000 /* CS1: Alternate flash */ + 2 0 0 0xef800000 0x40000 /* CS2: NAND CE1 */ + 3 0 0 0xef840000 0x40000>; /* CS3: NAND CE2 */ + + nor-boot@0,0 { + compatible = "amd,s29gl01gp", "cfi-flash"; + bank-width = <2>; + reg = <0 0 0x8000000>; /* 128MB */ + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "Primary user space"; + reg = <0x00000000 0x6f00000>; /* 111 MB */ + }; + partition@6f00000 { + label = "Primary kernel"; + reg = <0x6f00000 0x1000000>; /* 16 MB */ + }; + partition@7f00000 { + label = "Primary DTB"; + reg = <0x7f00000 0x40000>; /* 256 KB */ + }; + partition@7f40000 { + label = "Primary U-Boot environment"; + reg = <0x7f40000 0x40000>; /* 256 KB */ + }; + partition@7f80000 { + label = "Primary U-Boot"; + reg = <0x7f80000 0x80000>; /* 512 KB */ + read-only; + }; + }; + + nor-alternate@1,0 { + compatible = "amd,s29gl01gp", "cfi-flash"; + bank-width = <2>; + //reg = <0xf0000000 0x08000000>; /* 128MB */ + reg = <1 0 0x8000000>; /* 128MB */ + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "Secondary user space"; + reg = <0x00000000 0x6f00000>; /* 111 MB */ + }; + partition@6f00000 { + label = "Secondary kernel"; + reg = <0x6f00000 0x1000000>; /* 16 MB */ + }; + partition@7f00000 { + label = "Secondary DTB"; + reg = <0x7f00000 0x40000>; /* 256 KB */ + }; + partition@7f40000 { + label = "Secondary U-Boot environment"; + reg = <0x7f40000 0x40000>; /* 256 KB */ + }; + partition@7f80000 { + label = "Secondary U-Boot"; + reg = <0x7f80000 0x80000>; /* 512 KB */ + read-only; + }; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + /* + * Actual part could be ST Micro NAND08GW3B2A (1 GB), + * Micron MT29F8G08DAA (2x 512 MB), or Micron + * MT29F16G08FAA (2x 1 GB), depending on the build + * configuration + */ + compatible = "fsl,mpc8572-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <2 0 0x40000>; + /* U-Boot should fix this up if chip size > 1 GB */ + partition@0 { + label = "NAND Filesystem"; + reg = <0 0x40000000>; + }; + }; + + }; + + soc8572@ef000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8572-immr", "simple-bus"; + ranges = <0x0 0 0xef000000 0x100000>; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,mpc8572-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8572-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + memory-controller@6000 { + compatible = "fsl,mpc8572-memory-controller"; + reg = <0x6000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8572-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x100000>; // L2, 1M + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + + temp-sensor@48 { + compatible = "dallas,ds1631", "dallas,ds1621"; + reg = <0x48>; + }; + + temp-sensor@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + + cpu-supervisor@51 { + compatible = "dallas,ds4510"; + reg = <0x51>; + }; + + eeprom@54 { + compatible = "atmel,at24c128b"; + reg = <0x54>; + }; + + rtc@68 { + compatible = "stm,m41t00", + "dallas,ds1338"; + reg = <0x68>; + }; + + pcie-switch@70 { + compatible = "plx,pex8518"; + reg = <0x70>; + }; + + gpio1: gpio@18 { + compatible = "nxp,pca9557"; + reg = <0x18>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + + gpio2: gpio@1c { + compatible = "nxp,pca9557"; + reg = <0x1c>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + + gpio3: gpio@1e { + compatible = "nxp,pca9557"; + reg = <0x1e>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + + gpio4: gpio@1f { + compatible = "nxp,pca9557"; + reg = <0x1f>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + dma@c300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma"; + reg = <0xc300 0x4>; + ranges = <0x0 0xc100 0x200>; + cell-index = <1>; + dma-channel@0 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <76 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <77 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <78 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <79 2>; + }; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + /* eTSEC 1 */ + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + phy-connection-type = "sgmii"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <0x1>; + }; + phy1: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <0x2>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + /* eTSEC 2 */ + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 36 2 40 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + phy-connection-type = "sgmii"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + /* UART0 */ + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + /* UART1 */ + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + global-utilities@e0000 { //global utilities block + compatible = "fsl,mpc8572-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + + msi@41600 { + compatible = "fsl,mpc8572-msi", "fsl,mpic-msi"; + reg = <0x41600 0x80>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe0 0 + 0xe1 0 + 0xe2 0 + 0xe3 0 + 0xe4 0 + 0xe5 0 + 0xe6 0 + 0xe7 0>; + interrupt-parent = <&mpic>; + }; + + crypto@30000 { + compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2", + "fsl,sec2.1", "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2 58 2>; + interrupt-parent = <&mpic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x9fe>; + fsl,descriptor-types-mask = <0x3ab0ebf>; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + + gpio0: gpio@f000 { + compatible = "fsl,mpc8572-gpio"; + reg = <0xf000 0x1000>; + interrupts = <47 2>; + interrupt-parent = <&mpic>; + #gpio-cells = <2>; + gpio-controller; + }; + + gpio-leds { + compatible = "gpio-leds"; + + heartbeat { + label = "Heartbeat"; + gpios = <&gpio0 4 1>; + linux,default-trigger = "heartbeat"; + }; + + yellow { + label = "Yellow"; + gpios = <&gpio0 5 1>; + }; + + red { + label = "Red"; + gpios = <&gpio0 6 1>; + }; + + green { + label = "Green"; + gpios = <&gpio0 7 1>; + }; + }; + + /* PME (pattern-matcher) */ + pme@10000 { + compatible = "fsl,mpc8572-pme", "pme8572"; + reg = <0x10000 0x5000>; + interrupts = <57 2 64 2 65 2 66 2 67 2>; + interrupt-parent = <&mpic>; + }; + + tlu@2f000 { + compatible = "fsl,mpc8572-tlu", "fsl_tlu"; + reg = <0x2f000 0x1000>; + interupts = <61 2 >; + interrupt-parent = <&mpic>; + }; + + tlu@15000 { + compatible = "fsl,mpc8572-tlu", "fsl_tlu"; + reg = <0x15000 0x1000>; + interupts = <75 2>; + interrupt-parent = <&mpic>; + }; + }; + + /* + * PCI Express controller 3 @ ef008000 is not used. + * This would have been pci0 on other mpc85xx platforms. + */ + + /* PCI Express controller 2, wired to VPX P1,P2 backplane */ + pci1: pcie@ef009000 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0 0xef009000 0 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x10000000 + 0x1000000 0x0 0x00000000 0 0xe8800000 0x0 0x00010000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <25 2>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0x0 0x0 0x0 0x1 &mpic 0x4 0x1 + 0x0 0x0 0x0 0x2 &mpic 0x5 0x1 + 0x0 0x0 0x0 0x3 &mpic 0x6 0x1 + 0x0 0x0 0x0 0x4 &mpic 0x7 0x1 + >; + pcie@0 { + reg = <0x00000000 0x00000000 0x00000000 0x00000000 0x00000000>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x10000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + /* PCI Express controller 1, wired to PEX8518 PCIe switch */ + pci2: pcie@ef00a000 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0 0xef00a000 0 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x40000000 + 0x1000000 0x0 0x00000000 0 0xe8000000 0x0 0x10000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <26 2>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0x0 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x0 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x0 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x0 0x0 0x0 0x4 &mpic 0x3 0x1 + >; + pcie@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x40000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; -- cgit v1.1 From 6277597819f07945d8ef234518d970aa51ef17d8 Mon Sep 17 00:00:00 2001 From: Nate Case <ncase@xes-inc.com> Date: Thu, 11 Jun 2009 14:43:00 -0500 Subject: powerpc/85xx: Add defconfig for X-ES MPC85xx boards Signed-off-by: Nate Case <ncase@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> --- arch/powerpc/configs/85xx/xes_mpc85xx_defconfig | 1821 +++++++++++++++++++++++ 1 file changed, 1821 insertions(+) create mode 100644 arch/powerpc/configs/85xx/xes_mpc85xx_defconfig (limited to 'arch') diff --git a/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig b/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig new file mode 100644 index 0000000..2552cbe --- /dev/null +++ b/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig @@ -0,0 +1,1821 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.30-rc6 +# Thu Jun 11 11:25:17 2009 +# +# CONFIG_PPC64 is not set + +# +# Processor support +# +# CONFIG_6xx is not set +CONFIG_PPC_85xx=y +# CONFIG_PPC_8xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_E200 is not set +CONFIG_E500=y +# CONFIG_PPC_E500MC is not set +CONFIG_BOOKE=y +CONFIG_FSL_BOOKE=y +CONFIG_FSL_EMB_PERFMON=y +# CONFIG_PHYS_64BIT is not set +CONFIG_SPE=y +CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_BOOK3E_MMU=y +# CONFIG_PPC_MM_SLICES is not set +CONFIG_SMP=y +CONFIG_NR_CPUS=2 +CONFIG_PPC32=y +CONFIG_WORD_SIZE=32 +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set +CONFIG_MMU=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_GPIO=y +# CONFIG_ARCH_NO_VIRT_TO_BUS is not set +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_OF=y +CONFIG_PPC_UDBG_16550=y +CONFIG_GENERIC_TBSYNC=y +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +CONFIG_DTC=y +CONFIG_DEFAULT_UIMAGE=y +# CONFIG_PPC_DCR_NATIVE is not set +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +CONFIG_AUDIT=y +# CONFIG_AUDITSYSCALL is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_EXTRA_PASS=y +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y +CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_USE_GENERIC_SMP_HELPERS=y +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_STOP_MACHINE=y +CONFIG_BLOCK=y +CONFIG_LBD=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_FREEZER is not set +CONFIG_PPC_MSI_BITMAP=y + +# +# Platform support +# +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PQ2ADS is not set +CONFIG_MPC85xx=y +# CONFIG_MPC8540_ADS is not set +# CONFIG_MPC8560_ADS is not set +# CONFIG_MPC85xx_CDS is not set +# CONFIG_MPC85xx_MDS is not set +# CONFIG_MPC8536_DS is not set +# CONFIG_MPC85xx_DS is not set +# CONFIG_SOCRATES is not set +# CONFIG_KSI8560 is not set +CONFIG_XES_MPC85xx=y +# CONFIG_STX_GP3 is not set +# CONFIG_TQM8540 is not set +# CONFIG_TQM8541 is not set +# CONFIG_TQM8548 is not set +# CONFIG_TQM8555 is not set +# CONFIG_TQM8560 is not set +# CONFIG_SBC8548 is not set +# CONFIG_SBC8560 is not set +# CONFIG_IPIC is not set +CONFIG_MPIC=y +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_QUICC_ENGINE is not set +# CONFIG_CPM2 is not set +# CONFIG_FSL_ULI1575 is not set +CONFIG_MPC8xxx_GPIO=y +# CONFIG_SIMPLE_GPIO is not set + +# +# Kernel options +# +CONFIG_HIGHMEM=y +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set +# CONFIG_BINFMT_MISC is not set +CONFIG_MATH_EMULATION=y +# CONFIG_IOMMU_HELPER is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +# CONFIG_IRQ_ALL_CPUS is not set +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set +CONFIG_FORCE_MAX_ZONEORDER=11 +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" +# CONFIG_PM is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_FSL_SOC=y +CONFIG_FSL_PCI=y +CONFIG_FSL_LBC=y +CONFIG_PPC_PCI_CHOICE=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_SYSCALL=y +CONFIG_PCIEPORTBUS=y +CONFIG_PCIEAER=y +# CONFIG_PCIEASPM is not set +CONFIG_ARCH_SUPPORTS_MSI=y +CONFIG_PCI_MSI=y +CONFIG_PCI_LEGACY=y +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set + +# +# Advanced setup +# +CONFIG_ADVANCED_OPTIONS=y +CONFIG_LOWMEM_SIZE_BOOL=y +CONFIG_LOWMEM_SIZE=0x40000000 +# CONFIG_LOWMEM_CAM_NUM_BOOL is not set +CONFIG_LOWMEM_CAM_NUM=3 +# CONFIG_RELOCATABLE is not set +CONFIG_PAGE_OFFSET_BOOL=y +CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_KERNEL_START_BOOL=y +CONFIG_KERNEL_START=0x80000000 +# CONFIG_PHYSICAL_START_BOOL is not set +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_PHYSICAL_ALIGN=0x04000000 +CONFIG_TASK_SIZE_BOOL=y +CONFIG_TASK_SIZE=0x80000000 +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=y +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +CONFIG_NET_IPIP=y +CONFIG_NET_IPGRE=y +CONFIG_NET_IPGRE_BROADCAST=y +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +CONFIG_ARPD=y +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=y +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=y +CONFIG_INET6_XFRM_MODE_TUNNEL=y +CONFIG_INET6_XFRM_MODE_BEET=y +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +CONFIG_FIB_RULES=y +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +CONFIG_MTD_REDBOOT_PARTS=y +CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 +# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set +# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_STAA=y +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PHYSMAP_OF=y +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_CAFE is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +CONFIG_MTD_NAND_FSL_ELBC=y +CONFIG_MTD_NAND_FSL_UPM=y +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +CONFIG_OF_DEVICE=y +CONFIG_OF_GPIO=y +CONFIG_OF_I2C=y +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_NBD=y +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=131072 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=y +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +CONFIG_SCSI_LOGGING=y +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_FCOE is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y +CONFIG_SATA_AHCI=y +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_FSL is not set +CONFIG_ATA_SFF=y +# CONFIG_SATA_SVW is not set +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set +CONFIG_PATA_ALI=y +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set +# CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set +# CONFIG_MD is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# Enable only one of the two stacks, unless you know what you are doing +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +# CONFIG_MACINTOSH_DRIVERS is not set +CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y +CONFIG_DUMMY=y +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_ARCNET is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +CONFIG_BROADCOM_PHY=y +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_NET_PCI is not set +# CONFIG_B44 is not set +# CONFIG_ATL2 is not set +CONFIG_NETDEV_1000=y +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +CONFIG_E1000=y +# CONFIG_E1000E is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set +# CONFIG_IGBVF is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y +CONFIG_GIANFAR=y +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set +# CONFIG_JME is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_XILINX_XPS_PS2 is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_NR_UARTS=2 +CONFIG_SERIAL_8250_RUNTIME_UARTS=2 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +# CONFIG_SERIAL_OF_PLATFORM is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +CONFIG_NVRAM=y +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# PC SMBus host controller drivers +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_ISCH is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_MPC=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# +# CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# +# CONFIG_GPIO_XILINX is not set + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +CONFIG_GPIO_PCA953X=y +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# +# CONFIG_GPIO_BT8XX is not set + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ATXP1 is not set +CONFIG_SENSORS_DS1621=y +# CONFIG_SENSORS_I5K_AMB is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +CONFIG_SENSORS_LM90=y +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_ALIM7101_WDT is not set +# CONFIG_BOOKE_WDT is not set + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_REGULATOR is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=y +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +CONFIG_VGA_CONSOLE=y +# CONFIG_VGACON_SOFT_SCROLLBACK is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +# CONFIG_HID_A4TECH is not set +# CONFIG_HID_APPLE is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_CYPRESS is not set +# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_EZKEY is not set +# CONFIG_HID_KYE is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_KENSINGTON is not set +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MONTEREY is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_ISP1760_HCD=y +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_UWB is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_PCA9532 is not set +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_GPIO_PLATFORM=y +CONFIG_LEDS_GPIO_OF=y +# CONFIG_LEDS_LP5521 is not set +CONFIG_LEDS_PCA955X=y +# CONFIG_LEDS_BD2802 is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +CONFIG_LEDS_TRIGGER_GPIO=y +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set + +# +# iptables trigger is under Netfilter config (LED target) +# +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set +CONFIG_EDAC=y + +# +# Reporting subsystems +# +# CONFIG_EDAC_DEBUG is not set +CONFIG_EDAC_MM_EDAC=y +CONFIG_EDAC_MPC85XX=y +# CONFIG_EDAC_AMD8131 is not set +# CONFIG_EDAC_AMD8111 is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +CONFIG_RTC_DRV_DS1307=y +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +CONFIG_RTC_DRV_CMOS=y +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_RTC_DRV_GENERIC is not set +CONFIG_DMADEVICES=y + +# +# DMA Devices +# +CONFIG_FSL_DMA=y +CONFIG_DMA_ENGINE=y + +# +# DMA Clients +# +CONFIG_NET_DMA=y +# CONFIG_ASYNC_TX_DMA is not set +# CONFIG_DMATEST is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=y +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_SUMMARY=y +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +CONFIG_NFSD=y +# CONFIG_NFSD_V3 is not set +# CONFIG_NFSD_V4 is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=y +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_HIGHMEM is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_DEBUG_PAGEALLOC is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set +# CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set +# CONFIG_BDI_SWITCH is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_CRYPTO_DEV_TALITOS is not set +# CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set -- cgit v1.1 From 247608234e944e3e8e4d503c54c19ccb63dd27f2 Mon Sep 17 00:00:00 2001 From: Nate Case <ncase@xes-inc.com> Date: Thu, 11 Jun 2009 14:43:01 -0500 Subject: powerpc/bootwrapper: Custom build options for XPedite52xx targets Some XPedite52xx boards have a legacy boot loader requiring some special care in the boot wrapper. The use of cuboot-85xx is needed to fix up embedded device trees, and a custom link address is specified to accommodate the boot loader and larger kernel image sizes used on X-ES MPC85xx platforms. Signed-off-by: Nate Case <ncase@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> --- arch/powerpc/boot/wrapper | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper index 3ac75ae..4db487d 100755 --- a/arch/powerpc/boot/wrapper +++ b/arch/powerpc/boot/wrapper @@ -225,6 +225,10 @@ asp834x-redboot) platformo="$object/fixed-head.o $object/redboot-83xx.o" binary=y ;; +xpedite52*) + link_address='0x1400000' + platformo=$object/cuboot-85xx.o + ;; esac vmz="$tmpdir/`basename \"$kernel\"`.$ext" -- cgit v1.1 From 79290e4b692af8a76273bab38e41a3a385dedc7b Mon Sep 17 00:00:00 2001 From: Sean MacLennan <smaclennan@pikatech.com> Date: Wed, 10 Jun 2009 15:09:23 +0000 Subject: powerpc/warp: Fix ISA_DMA_THRESHOLD default If no device is passed to __dma_alloc_coherent, it defaults to using ISA_DMA_THRESHOLD for the mask. This patch provides a reasonable default rather than 0. Signed-off-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> --- arch/powerpc/platforms/44x/warp.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/44x/warp.c b/arch/powerpc/platforms/44x/warp.c index c511880..42e09a9 100644 --- a/arch/powerpc/platforms/44x/warp.c +++ b/arch/powerpc/platforms/44x/warp.c @@ -43,7 +43,13 @@ static int __init warp_probe(void) { unsigned long root = of_get_flat_dt_root(); - return of_flat_dt_is_compatible(root, "pika,warp"); + if (!of_flat_dt_is_compatible(root, "pika,warp")) + return 0; + + /* For __dma_alloc_coherent */ + ISA_DMA_THRESHOLD = ~0L; + + return 1; } define_machine(warp) { -- cgit v1.1 From 9317726de42a157c377f7fe9110a63260800582f Mon Sep 17 00:00:00 2001 From: Timur Tabi <timur@freescale.com> Date: Tue, 26 May 2009 05:21:41 +0000 Subject: powerpc: Introduce macro spin_event_timeout() The macro spin_event_timeout() takes a condition and timeout value (in microseconds) as parameters. It spins until either the condition is true or the timeout expires. It returns the result of the condition when the loop was terminated. This primary purpose of this macro is to poll on a hardware register until a status bit changes. The timeout ensures that the loop still terminates if the bit doesn't change as expected. This macro makes it easier for driver developers to perform this kind of operation properly. Signed-off-by: Timur Tabi <timur@freescale.com> Acked-by: Geoff Thorpe <Geoff.Thorpe@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> --- arch/powerpc/include/asm/delay.h | 36 ++++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/include/asm/delay.h b/arch/powerpc/include/asm/delay.h index f9200a6..1e2eb41 100644 --- a/arch/powerpc/include/asm/delay.h +++ b/arch/powerpc/include/asm/delay.h @@ -2,8 +2,11 @@ #define _ASM_POWERPC_DELAY_H #ifdef __KERNEL__ +#include <asm/time.h> + /* * Copyright 1996, Paul Mackerras. + * Copyright (C) 2009 Freescale Semiconductor, Inc. All rights reserved. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -30,5 +33,38 @@ extern void udelay(unsigned long usecs); #define mdelay(n) udelay((n) * 1000) #endif +/** + * spin_event_timeout - spin until a condition gets true or a timeout elapses + * @condition: a C expression to evalate + * @timeout: timeout, in microseconds + * @delay: the number of microseconds to delay between each evaluation of + * @condition + * + * The process spins until the condition evaluates to true (non-zero) or the + * timeout elapses. The return value of this macro is the value of + * @condition when the loop terminates. This allows you to determine the cause + * of the loop terminates. If the return value is zero, then you know a + * timeout has occurred. + * + * This primary purpose of this macro is to poll on a hardware register + * until a status bit changes. The timeout ensures that the loop still + * terminates even if the bit never changes. The delay is for devices that + * need a delay in between successive reads. + * + * gcc will optimize out the if-statement if @delay is a constant. + */ +#define spin_event_timeout(condition, timeout, delay) \ +({ \ + typeof(condition) __ret; \ + unsigned long __loops = tb_ticks_per_usec * timeout; \ + unsigned long __start = get_tbl(); \ + while (!(__ret = (condition)) && (tb_ticks_since(__start) <= __loops)) \ + if (delay) \ + udelay(delay); \ + else \ + cpu_relax(); \ + __ret; \ +}) + #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_DELAY_H */ -- cgit v1.1 From ba55bd74360ea4b8b95e73ed79474d37ff482b36 Mon Sep 17 00:00:00 2001 From: Michael Ellerman <michael@ellerman.id.au> Date: Tue, 9 Jun 2009 20:48:51 +0000 Subject: powerpc: Add configurable -Werror for arch/powerpc Add the option to build the code under arch/powerpc with -Werror. The intention is to make it harder for people to inadvertantly introduce warnings in the arch/powerpc code. It needs to be configurable so that if a warning is introduced, people can easily work around it while it's being fixed. The option is a negative, ie. don't enable -Werror, so that it will be turned on for allyes and allmodconfig builds. The default is n, in the hope that developers will build with -Werror, that will probably lead to some build breaks, I am prepared to be flamed. It's not enabled for math-emu, which is a steaming pile of warnings. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> --- arch/powerpc/Kconfig.debug | 17 +++++++++++++++++ arch/powerpc/kernel/Makefile | 2 ++ arch/powerpc/kvm/Makefile | 2 ++ arch/powerpc/lib/Makefile | 2 ++ arch/powerpc/mm/Makefile | 2 ++ arch/powerpc/oprofile/Makefile | 2 ++ arch/powerpc/platforms/Makefile | 2 ++ arch/powerpc/sysdev/Makefile | 2 ++ arch/powerpc/xmon/Makefile | 2 ++ 9 files changed, 33 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug index d79a902..3b10051 100644 --- a/arch/powerpc/Kconfig.debug +++ b/arch/powerpc/Kconfig.debug @@ -2,6 +2,23 @@ menu "Kernel hacking" source "lib/Kconfig.debug" +config PPC_DISABLE_WERROR + bool "Don't build arch/powerpc code with -Werror" + default n + help + This option tells the compiler NOT to build the code under + arch/powerpc with the -Werror flag (which means warnings + are treated as errors). + + Only enable this if you are hitting a build failure in the + arch/powerpc code caused by a warning, and you don't feel + inclined to fix it. + +config PPC_WERROR + bool + depends on !PPC_DISABLE_WERROR + default y + config PRINT_STACK_DEPTH int "Stack depth to print" if DEBUG_KERNEL default 64 diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 612b0c4..6a4fb29 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -4,6 +4,8 @@ CFLAGS_ptrace.o += -DUTS_MACHINE='"$(UTS_MACHINE)"' +subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror + ifeq ($(CONFIG_PPC64),y) CFLAGS_prom_init.o += -mno-minimal-toc endif diff --git a/arch/powerpc/kvm/Makefile b/arch/powerpc/kvm/Makefile index 4b2df66..459c7ee 100644 --- a/arch/powerpc/kvm/Makefile +++ b/arch/powerpc/kvm/Makefile @@ -2,6 +2,8 @@ # Makefile for Kernel-based Virtual Machine module # +subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror + EXTRA_CFLAGS += -Ivirt/kvm -Iarch/powerpc/kvm common-objs-y = $(addprefix ../../../virt/kvm/, kvm_main.o coalesced_mmio.o) diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile index 29b742b..3040dac 100644 --- a/arch/powerpc/lib/Makefile +++ b/arch/powerpc/lib/Makefile @@ -2,6 +2,8 @@ # Makefile for ppc-specific library files.. # +subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror + ifeq ($(CONFIG_PPC64),y) EXTRA_CFLAGS += -mno-minimal-toc endif diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile index c4bcf07..2d2192e 100644 --- a/arch/powerpc/mm/Makefile +++ b/arch/powerpc/mm/Makefile @@ -2,6 +2,8 @@ # Makefile for the linux ppc-specific parts of the memory manager. # +subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror + ifeq ($(CONFIG_PPC64),y) EXTRA_CFLAGS += -mno-minimal-toc endif diff --git a/arch/powerpc/oprofile/Makefile b/arch/powerpc/oprofile/Makefile index 2ef6b0d..73e1c2c 100644 --- a/arch/powerpc/oprofile/Makefile +++ b/arch/powerpc/oprofile/Makefile @@ -1,3 +1,5 @@ +subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror + ifeq ($(CONFIG_PPC64),y) EXTRA_CFLAGS += -mno-minimal-toc endif diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile index f741919..a6812ee 100644 --- a/arch/powerpc/platforms/Makefile +++ b/arch/powerpc/platforms/Makefile @@ -1,4 +1,6 @@ +subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror + obj-$(CONFIG_FSL_ULI1575) += fsl_uli1575.o obj-$(CONFIG_PPC_PMAC) += powermac/ diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index 2d1c87d..d073bfd 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -1,3 +1,5 @@ +subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror + ifeq ($(CONFIG_PPC64),y) EXTRA_CFLAGS += -mno-minimal-toc endif diff --git a/arch/powerpc/xmon/Makefile b/arch/powerpc/xmon/Makefile index 9cb03b7..85ab97a 100644 --- a/arch/powerpc/xmon/Makefile +++ b/arch/powerpc/xmon/Makefile @@ -1,5 +1,7 @@ # Makefile for xmon +subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror + ifdef CONFIG_PPC64 EXTRA_CFLAGS += -mno-minimal-toc endif -- cgit v1.1 From 48c931125bf228a529b8d05218e9fdda899dfa93 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt <benh@kernel.crashing.org> Date: Sun, 14 Jun 2009 14:45:50 +0000 Subject: powerpc: Fix invalid construct in our CPU selection Kconfig commit 5b7c3c918c9c26c50d220b2b50359208cb5a1dbe introduced an invalid construct in our CPU selection. This caused warnings, though it still appeared to do the right thing. This fixes it properly by having separate formal definitions of PPC_BOOK3S_32 and PPC_BOOK3S_64 and one statement defining PPC_BOOK3S based on the two above. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> --- arch/powerpc/platforms/Kconfig.cputype | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype index cca6b4f..c419254 100644 --- a/arch/powerpc/platforms/Kconfig.cputype +++ b/arch/powerpc/platforms/Kconfig.cputype @@ -21,7 +21,7 @@ choice If unsure, select 52xx/6xx/7xx/74xx/82xx/83xx/86xx. -config PPC_BOOK3S +config PPC_BOOK3S_32 bool "512x/52xx/6xx/7xx/74xx/82xx/83xx/86xx" select PPC_FPU @@ -57,11 +57,14 @@ config E200 endchoice -config PPC_BOOK3S - default y +config PPC_BOOK3S_64 + def_bool y depends on PPC64 select PPC_FPU +config PPC_BOOK3S + def_bool y + depends on PPC_BOOK3S_32 || PPC_BOOK3S_64 config POWER4_ONLY bool "Optimize for POWER4" -- cgit v1.1 From 2fae0a524b193e200b71778407ad29b22417056a Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt <benh@kernel.crashing.org> Date: Sun, 14 Jun 2009 16:16:10 +0000 Subject: powerpc: Add memory clobber to mtspr() Without this clobber, mtspr can be re-ordered by gcc vs. surrounding memory accesses. While this might be ok for some cases, it's not in others and I'm not confident that all callers get it right (In fact I'm sure some of them don't). So for now, let's make mtspr() itself contain a memory clobber until we can audit and fix everything, at which point we can remove it if we think it's worth doing so. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> --- arch/powerpc/include/asm/reg.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index a3c28e4..1170267 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -755,7 +755,8 @@ #define mfspr(rn) ({unsigned long rval; \ asm volatile("mfspr %0," __stringify(rn) \ : "=r" (rval)); rval;}) -#define mtspr(rn, v) asm volatile("mtspr " __stringify(rn) ",%0" : : "r" (v)) +#define mtspr(rn, v) asm volatile("mtspr " __stringify(rn) ",%0" : : "r" (v)\ + : "memory") #ifdef __powerpc64__ #ifdef CONFIG_PPC_CELL -- cgit v1.1 From 15ba400ebb9d958afb3d2a7aa079a56e9ad2fe7a Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Date: Tue, 16 Jun 2009 07:42:20 +0000 Subject: sh: Add support mtd mapping for highlander Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/boards/mach-highlander/setup.c | 49 +++++++++++++++++++++++++++ arch/sh/include/mach-common/mach/highlander.h | 3 ++ 2 files changed, 52 insertions(+) (limited to 'arch') diff --git a/arch/sh/boards/mach-highlander/setup.c b/arch/sh/boards/mach-highlander/setup.c index 20fe72c..df054e5 100644 --- a/arch/sh/boards/mach-highlander/setup.c +++ b/arch/sh/boards/mach-highlander/setup.c @@ -17,6 +17,7 @@ #include <linux/platform_device.h> #include <linux/ata_platform.h> #include <linux/types.h> +#include <linux/mtd/physmap.h> #include <linux/i2c.h> #include <linux/irq.h> #include <net/ax88796.h> @@ -178,6 +179,53 @@ static struct platform_device ax88796_device = { .resource = ax88796_resources, }; +static struct mtd_partition nor_flash_partitions[] = { + { + .name = "loader", + .offset = 0x00000000, + .size = 512 * 1024, + }, + { + .name = "bootenv", + .offset = MTDPART_OFS_APPEND, + .size = 512 * 1024, + }, + { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = 4 * 1024 * 1024, + }, + { + .name = "data", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct physmap_flash_data nor_flash_data = { + .width = 4, + .parts = nor_flash_partitions, + .nr_parts = ARRAY_SIZE(nor_flash_partitions), +}; + +/* This config is flash board for mass production. */ +static struct resource nor_flash_resources[] = { + [0] = { + .start = PA_NORFLASH_ADDR, + .end = PA_NORFLASH_ADDR + PA_NORFLASH_SIZE - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device nor_flash_device = { + .name = "physmap-flash", + .dev = { + .platform_data = &nor_flash_data, + }, + .num_resources = ARRAY_SIZE(nor_flash_resources), + .resource = nor_flash_resources, +}; + static struct resource smbus_resources[] = { [0] = { .start = PA_SMCR, @@ -209,6 +257,7 @@ static struct platform_device *r7780rp_devices[] __initdata = { &m66592_usb_peripheral_device, &heartbeat_device, &smbus_device, + &nor_flash_device, #ifndef CONFIG_SH_R7780RP &ax88796_device, #endif diff --git a/arch/sh/include/mach-common/mach/highlander.h b/arch/sh/include/mach-common/mach/highlander.h index bd26a84..5d9d4d5 100644 --- a/arch/sh/include/mach-common/mach/highlander.h +++ b/arch/sh/include/mach-common/mach/highlander.h @@ -2,6 +2,9 @@ #define __ASM_SH_RENESAS_R7780RP_H /* Box specific addresses. */ +#define PA_NORFLASH_ADDR 0x00000000 +#define PA_NORFLASH_SIZE 0x04000000 + #if defined(CONFIG_SH_R7780MP) #define PA_BCR 0xa4000000 /* FPGA */ #define PA_SDPOW (-1) -- cgit v1.1 From 02a146dffa471fec4c095c3810645df26ac86d5d Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Date: Tue, 16 Jun 2009 07:43:21 +0000 Subject: sh: Update r7780mp defconfig Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/configs/r7780mp_defconfig | 143 +++++++++++++++++++++++++++++++------- 1 file changed, 118 insertions(+), 25 deletions(-) (limited to 'arch') diff --git a/arch/sh/configs/r7780mp_defconfig b/arch/sh/configs/r7780mp_defconfig index 943da63..d393d9e 100644 --- a/arch/sh/configs/r7780mp_defconfig +++ b/arch/sh/configs/r7780mp_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Mon Apr 27 12:53:28 2009 +# Linux kernel version: 2.6.30 +# Tue Jun 16 16:08:44 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -20,6 +20,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_ARCH_SUSPEND_POSSIBLE is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_SYS_SUPPORTS_PCI=y +CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -92,6 +93,10 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_COMPAT_BRK=y @@ -100,7 +105,7 @@ CONFIG_SLAB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y CONFIG_TRACEPOINTS=y -# CONFIG_MARKERS is not set +CONFIG_MARKERS=y CONFIG_OPROFILE=m CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set @@ -185,6 +190,7 @@ CONFIG_CPU_SUBTYPE_SH7780=y CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MEMORY_START=0x08000000 CONFIG_MEMORY_SIZE=0x08000000 # CONFIG_29BIT is not set @@ -203,7 +209,6 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set -CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_HUGETLB_PAGE_SIZE_64K=y # CONFIG_HUGETLB_PAGE_SIZE_256K is not set # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set @@ -225,6 +230,7 @@ CONFIG_NR_QUICK=2 CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # # Cache configuration @@ -258,9 +264,10 @@ CONFIG_SH_R7780MP=y # # Timer and clock configuration # -CONFIG_SH_TMU=y -CONFIG_SH_TIMER_IRQ=28 +CONFIG_SH_TIMER_TMU=y CONFIG_SH_PCLK_FREQ=33333333 +CONFIG_SH_CLK_CPG=y +CONFIG_SH_CLK_CPG_LEGACY=y # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -301,12 +308,14 @@ CONFIG_KEXEC=y # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y CONFIG_GUSA=y +# CONFIG_SPARSE_IRQ is not set # # Boot options # CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1" @@ -445,7 +454,91 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set -# CONFIG_MTD is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +# CONFIG_MTD_CHAR is not set +# CONFIG_MTD_BLKDEVS is not set +# CONFIG_MTD_BLOCK is not set +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_PCI is not set +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_CPQ_CISS_DA is not set @@ -500,10 +593,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_BLK_DEV_SR is not set CONFIG_CHR_DEV_SG=m # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -521,6 +610,7 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -529,6 +619,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set @@ -543,7 +634,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -1111,6 +1201,7 @@ CONFIG_RTC_DRV_RS5C372=y # on-CPU RTC drivers # CONFIG_RTC_DRV_SH=y +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set @@ -1138,6 +1229,7 @@ CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1145,6 +1237,7 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set CONFIG_FUSE_FS=m +# CONFIG_CUSE is not set # # Caches @@ -1190,6 +1283,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1328,41 +1422,40 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_RING_BUFFER=y +CONFIG_EVENT_TRACING=y +CONFIG_CONTEXT_SWITCH_TRACER=y CONFIG_TRACING=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_RING_BUFFER_BENCHMARK is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -CONFIG_SH_STANDARD_BIOS=y -# CONFIG_EARLY_SCIF_CONSOLE is not set -CONFIG_EARLY_PRINTK=y +# CONFIG_SH_STANDARD_BIOS is not set +CONFIG_EARLY_SCIF_CONSOLE=y +CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe00000 +# CONFIG_EARLY_PRINTK is not set # CONFIG_DEBUG_BOOTMEM is not set CONFIG_DEBUG_STACKOVERFLOW=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_4KSTACKS is not set -# CONFIG_IRQSTACKS is not set CONFIG_DUMP_CODE=y # CONFIG_SH_NO_BSS_INIT is not set -# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options -- cgit v1.1 From 39f4490c70eae62cfed62081243110607069d3f9 Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Date: Tue, 16 Jun 2009 07:44:10 +0000 Subject: sh: Revised clock function in highlander Clock function was changed, but highlander used old function. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/boards/mach-highlander/setup.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sh/boards/mach-highlander/setup.c b/arch/sh/boards/mach-highlander/setup.c index df054e5..dd297d8 100644 --- a/arch/sh/boards/mach-highlander/setup.c +++ b/arch/sh/boards/mach-highlander/setup.c @@ -296,9 +296,10 @@ device_initcall(r7780rp_devices_setup); /* * Platform specific clocks */ -static void ivdr_clk_enable(struct clk *clk) +static int ivdr_clk_enable(struct clk *clk) { ctrl_outw(ctrl_inw(PA_IVDRCTL) | (1 << IVDR_CK_ON), PA_IVDRCTL); + return 0; } static void ivdr_clk_disable(struct clk *clk) -- cgit v1.1 From 6a047d8b9efc4b7d0c57ca4835f7e519e5c90d3f Mon Sep 17 00:00:00 2001 From: Chris Wright <chrisw@sous-sol.org> Date: Tue, 16 Jun 2009 03:01:37 -0400 Subject: amd-iommu: resume cleanup Now that enable_iommus() will call iommu_disable() for each iommu, the call to disable_iommus() during resume is redundant. Also, the order for an invalidation is to invalidate device table entries first, then domain translations. Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> --- arch/x86/kernel/amd_iommu_init.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c index 068a356..10b2acc 100644 --- a/arch/x86/kernel/amd_iommu_init.c +++ b/arch/x86/kernel/amd_iommu_init.c @@ -1079,12 +1079,6 @@ static void disable_iommus(void) static int amd_iommu_resume(struct sys_device *dev) { - /* - * Disable IOMMUs before reprogramming the hardware registers. - * IOMMU is still enabled from the resume kernel. - */ - disable_iommus(); - /* re-load the hardware */ enable_iommus(); @@ -1092,8 +1086,8 @@ static int amd_iommu_resume(struct sys_device *dev) * we have to flush after the IOMMUs are enabled because a * disabled IOMMU will never execute the commands we send */ - amd_iommu_flush_all_domains(); amd_iommu_flush_all_devices(); + amd_iommu_flush_all_domains(); return 0; } -- cgit v1.1 From 5dfaf90f8052327c92fbe3c470a2e6634be296c0 Mon Sep 17 00:00:00 2001 From: Ingo Molnar <mingo@elte.hu> Date: Tue, 16 Jun 2009 10:23:32 +0200 Subject: x86: mm: Read cr2 before prefetching the mmap_lock Prefetch instructions can generate spurious faults on certain models of older CPUs. The faults themselves cannot be stopped and they can occur pretty much anywhere - so the way we solve them is that we detect certain patterns and ignore the fault. There is one small path of code where we must not take faults though: the #PF handler execution leading up to the reading of the CR2 (the faulting address). If we take a fault there then we destroy the CR2 value (with that of the prefetching instruction's) and possibly mishandle user-space or kernel-space pagefaults. It turns out that in current upstream we do exactly that: prefetchw(&mm->mmap_sem); /* Get the faulting address: */ address = read_cr2(); This is not good. So turn around the order: first read the cr2 then prefetch the lock address. Reading cr2 is plenty fast (2 cycles) so delaying the prefetch by this amount shouldnt be a big issue performance-wise. [ And this might explain a mystery fault.c warning that sometimes occurs on one an old AMD/Semptron based test-system i have - which does have such prefetch problems. ] Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Nick Piggin <npiggin@suse.de> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Vegard Nossum <vegard.nossum@gmail.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> LKML-Reference: <20090616030522.GA22162@Krystal> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/mm/fault.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c index c6acc63..0482fa6 100644 --- a/arch/x86/mm/fault.c +++ b/arch/x86/mm/fault.c @@ -951,11 +951,11 @@ do_page_fault(struct pt_regs *regs, unsigned long error_code) tsk = current; mm = tsk->mm; - prefetchw(&mm->mmap_sem); - /* Get the faulting address: */ address = read_cr2(); + prefetchw(&mm->mmap_sem); + if (unlikely(kmmio_fault(regs, address))) return; -- cgit v1.1 From eb73e6221c5013b32647bcf44bcc570232ba2804 Mon Sep 17 00:00:00 2001 From: Marek Vasut <marek.vasut@gmail.com> Date: Mon, 1 Jun 2009 22:34:14 +0200 Subject: [ARM] pxa/palm: various fixes for PalmZ72 (mostly audio asoc and usb) Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com> --- arch/arm/mach-pxa/include/mach/palmz72.h | 5 +-- arch/arm/mach-pxa/palmz72.c | 65 +++++++++++++++++++++++++++++++- 2 files changed, 65 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-pxa/include/mach/palmz72.h b/arch/arm/mach-pxa/include/mach/palmz72.h index 5032307..2806ef6 100644 --- a/arch/arm/mach-pxa/include/mach/palmz72.h +++ b/arch/arm/mach-pxa/include/mach/palmz72.h @@ -21,7 +21,7 @@ /* SD/MMC */ #define GPIO_NR_PALMZ72_SD_DETECT_N 14 #define GPIO_NR_PALMZ72_SD_POWER_N 98 -#define GPIO_NR_PALMZ72_SD_RO 115 +#define GPIO_NR_PALMZ72_SD_RO 115 /* Touchscreen */ #define GPIO_NR_PALMZ72_WM9712_IRQ 27 @@ -31,8 +31,7 @@ /* USB */ #define GPIO_NR_PALMZ72_USB_DETECT_N 15 -#define GPIO_NR_PALMZ72_USB_POWER 95 -#define GPIO_NR_PALMZ72_USB_PULLUP 12 +#define GPIO_NR_PALMZ72_USB_PULLUP 95 /* LCD/Backlight */ #define GPIO_NR_PALMZ72_BL_POWER 20 diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c index b88eb4d..c3645aa 100644 --- a/arch/arm/mach-pxa/palmz72.c +++ b/arch/arm/mach-pxa/palmz72.c @@ -27,7 +27,9 @@ #include <linux/pda_power.h> #include <linux/pwm_backlight.h> #include <linux/gpio.h> +#include <linux/wm97xx_batt.h> #include <linux/power_supply.h> +#include <linux/usb/gpio_vbus.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -41,6 +43,8 @@ #include <mach/irda.h> #include <mach/pxa27x_keypad.h> #include <mach/udc.h> +#include <mach/palmasoc.h> + #include <mach/pm.h> #include "generic.h" @@ -66,6 +70,8 @@ static unsigned long palmz72_pin_config[] __initdata = { GPIO29_AC97_SDATA_IN_0, GPIO30_AC97_SDATA_OUT, GPIO31_AC97_SYNC, + GPIO89_AC97_SYSCLK, + GPIO113_AC97_nRESET, /* IrDA */ GPIO49_GPIO, /* ir disable */ @@ -77,8 +83,7 @@ static unsigned long palmz72_pin_config[] __initdata = { /* USB */ GPIO15_GPIO, /* usb detect */ - GPIO12_GPIO, /* usb pullup */ - GPIO95_GPIO, /* usb power */ + GPIO95_GPIO, /* usb pullup */ /* Matrix keypad */ GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH, @@ -355,6 +360,22 @@ static struct platform_device palmz72_leds = { }; /****************************************************************************** + * UDC + ******************************************************************************/ +static struct gpio_vbus_mach_info palmz72_udc_info = { + .gpio_vbus = GPIO_NR_PALMZ72_USB_DETECT_N, + .gpio_pullup = GPIO_NR_PALMZ72_USB_PULLUP, +}; + +static struct platform_device palmz72_gpio_vbus = { + .name = "gpio-vbus", + .id = -1, + .dev = { + .platform_data = &palmz72_udc_info, + }, +}; + +/****************************************************************************** * Power supply ******************************************************************************/ static int power_supply_init(struct device *dev) @@ -422,6 +443,31 @@ static struct platform_device power_supply = { }; /****************************************************************************** + * WM97xx battery + ******************************************************************************/ +static struct wm97xx_batt_info wm97xx_batt_pdata = { + .batt_aux = WM97XX_AUX_ID3, + .temp_aux = WM97XX_AUX_ID2, + .charge_gpio = -1, + .max_voltage = PALMZ72_BAT_MAX_VOLTAGE, + .min_voltage = PALMZ72_BAT_MIN_VOLTAGE, + .batt_mult = 1000, + .batt_div = 414, + .temp_mult = 1, + .temp_div = 1, + .batt_tech = POWER_SUPPLY_TECHNOLOGY_LIPO, + .batt_name = "main-batt", +}; + +/****************************************************************************** + * aSoC audio + ******************************************************************************/ +static struct platform_device palmz72_asoc = { + .name = "palm27x-asoc", + .id = -1, +}; + +/****************************************************************************** * Framebuffer ******************************************************************************/ static struct pxafb_mode_info palmz72_lcd_modes[] = { @@ -527,17 +573,32 @@ device_initcall(palmz72_pm_init); static struct platform_device *devices[] __initdata = { &palmz72_backlight, &palmz72_leds, + &palmz72_asoc, &power_supply, + &palmz72_gpio_vbus, }; +/* setup udc GPIOs initial state */ +static void __init palmz72_udc_init(void) +{ + if (!gpio_request(GPIO_NR_PALMZ72_USB_PULLUP, "USB Pullup")) { + gpio_direction_output(GPIO_NR_PALMZ72_USB_PULLUP, 0); + gpio_free(GPIO_NR_PALMZ72_USB_PULLUP); + } +} + static void __init palmz72_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(palmz72_pin_config)); + set_pxa_fb_info(&palmz72_lcd_screen); pxa_set_mci_info(&palmz72_mci_platform_data); + palmz72_udc_init(); pxa_set_ac97_info(NULL); pxa_set_ficp_info(&palmz72_ficp_platform_data); pxa_set_keypad_info(&palmz72_keypad_platform_data); + wm97xx_bat_set_pdata(&wm97xx_batt_pdata); + platform_add_devices(devices, ARRAY_SIZE(devices)); } -- cgit v1.1 From 3cb05c97ad38aab0858fc176fd1577ac4a947bad Mon Sep 17 00:00:00 2001 From: Mike Rapoport <mike@compulab.co.il> Date: Tue, 16 Jun 2009 15:19:24 +0300 Subject: [ARM] pxa/em-x270: remove .gpio_cs from em_x270_libertas_pdata Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com> --- arch/arm/mach-pxa/em-x270.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index 243e080..b2d5a53 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -735,6 +735,7 @@ static struct pxa2xx_spi_chip em_x270_libertas_chip = { .rx_threshold = 1, .tx_threshold = 1, .timeout = 1000, + .gpio_cs = 14, }; static unsigned long em_x270_libertas_pin_config[] = { @@ -803,7 +804,6 @@ static int em_x270_libertas_teardown(struct spi_device *spi) struct libertas_spi_platform_data em_x270_libertas_pdata = { .use_dummy_writes = 1, - .gpio_cs = 14, .setup = em_x270_libertas_setup, .teardown = em_x270_libertas_teardown, }; -- cgit v1.1 From a37ed43115b70e832c7e8cc7dabd026d127ad9db Mon Sep 17 00:00:00 2001 From: Mike Rapoport <mike@compulab.co.il> Date: Mon, 18 May 2009 08:53:56 +0300 Subject: [ARM] pxa/em-x270: add ability to control GPS and GPRS power Register userspace-consumer devices to allow userspace control of voltage regulators supplying GPS and GPRS modules Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.miao@marvell.com> --- arch/arm/mach-pxa/em-x270.c | 53 +++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 51 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index b2d5a53..5184a57 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -30,6 +30,7 @@ #include <linux/apm-emulation.h> #include <linux/i2c.h> #include <linux/i2c/pca953x.h> +#include <linux/regulator/userspace-consumer.h> #include <media/soc_camera.h> @@ -1038,6 +1039,52 @@ static void __init em_x270_init_camera(void) static inline void em_x270_init_camera(void) {} #endif +static struct regulator_bulk_data em_x270_gps_consumer_supply = { + .supply = "vcc gps", +}; + +static struct regulator_userspace_consumer_data em_x270_gps_consumer_data = { + .name = "vcc gps", + .num_supplies = 1, + .supplies = &em_x270_gps_consumer_supply, +}; + +static struct platform_device em_x270_gps_userspace_consumer = { + .name = "reg-userspace-consumer", + .id = 0, + .dev = { + .platform_data = &em_x270_gps_consumer_data, + }, +}; + +static struct regulator_bulk_data em_x270_gprs_consumer_supply = { + .supply = "vcc gprs", +}; + +static struct regulator_userspace_consumer_data em_x270_gprs_consumer_data = { + .name = "vcc gprs", + .num_supplies = 1, + .supplies = &em_x270_gprs_consumer_supply +}; + +static struct platform_device em_x270_gprs_userspace_consumer = { + .name = "reg-userspace-consumer", + .id = 1, + .dev = { + .platform_data = &em_x270_gprs_consumer_data, + } +}; + +static struct platform_device *em_x270_userspace_consumers[] = { + &em_x270_gps_userspace_consumer, + &em_x270_gprs_userspace_consumer, +}; + +static void __init em_x270_userspace_consumers_init(void) +{ + platform_add_devices(ARRAY_AND_SIZE(em_x270_userspace_consumers)); +} + /* DA9030 related initializations */ #define REGULATOR_CONSUMER(_name, _dev, _supply) \ static struct regulator_consumer_supply _name##_consumers[] = { \ @@ -1047,11 +1094,11 @@ static inline void em_x270_init_camera(void) {} }, \ } -REGULATOR_CONSUMER(ldo3, NULL, "vcc gps"); +REGULATOR_CONSUMER(ldo3, &em_x270_gps_userspace_consumer.dev, "vcc gps"); REGULATOR_CONSUMER(ldo5, NULL, "vcc cam"); REGULATOR_CONSUMER(ldo10, &pxa_device_mci.dev, "vcc sdio"); REGULATOR_CONSUMER(ldo12, NULL, "vcc usb"); -REGULATOR_CONSUMER(ldo19, NULL, "vcc gprs"); +REGULATOR_CONSUMER(ldo19, &em_x270_gprs_userspace_consumer.dev, "vcc gprs"); #define REGULATOR_INIT(_ldo, _min_uV, _max_uV, _ops_mask) \ static struct regulator_init_data _ldo##_data = { \ @@ -1062,6 +1109,7 @@ REGULATOR_CONSUMER(ldo19, NULL, "vcc gprs"); .enabled = 0, \ }, \ .valid_ops_mask = _ops_mask, \ + .apply_uV = 1, \ }, \ .num_consumer_supplies = ARRAY_SIZE(_ldo##_consumers), \ .consumer_supplies = _ldo##_consumers, \ @@ -1240,6 +1288,7 @@ static void __init em_x270_init(void) em_x270_init_spi(); em_x270_init_i2c(); em_x270_init_camera(); + em_x270_userspace_consumers_init(); } MACHINE_START(EM_X270, "Compulab EM-X270") -- cgit v1.1 From c63a5751d971b07d8cd80f4d4aae75c676665a3b Mon Sep 17 00:00:00 2001 From: Mike Rapoport <mike@compulab.co.il> Date: Mon, 11 May 2009 15:06:16 +0300 Subject: [ARM] pxa/em-x270: always register AC97 controller device After commit 6b849bcff0004aa5dd216b4d3eb56f51c9df8a72 (ASoC: Convert PXA AC97 driver to probe with the platform device) AC97 controller device should be registered explicitly for both ASoC and generic AC97 drivers Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com> --- arch/arm/mach-pxa/em-x270.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index 5184a57..5343d1f 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -839,10 +839,14 @@ static void __init em_x270_init_spi(void) static inline void em_x270_init_spi(void) {} #endif -#if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE) +#if defined(CONFIG_SND_PXA2XX_AC97_LIB) +static pxa2xx_audio_ops_t em_x270_ac97_info = { + .reset_gpio = 113, +}; + static void __init em_x270_init_ac97(void) { - pxa_set_ac97_info(NULL); + pxa_set_ac97_info(&em_x270_ac97_info); } #else static inline void em_x270_init_ac97(void) {} -- cgit v1.1 From 303f2d7dc8eddc65de27d97eab0fc1c04ec4d2e1 Mon Sep 17 00:00:00 2001 From: Mike Rapoport <mike@compulab.co.il> Date: Sun, 14 Jun 2009 12:04:19 +0300 Subject: [ARM] pxa/em-x270: fix type in SND_PXA2XX_LIB_AC97 Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com> --- arch/arm/mach-pxa/em-x270.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index 5343d1f..63b10d9 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -839,7 +839,7 @@ static void __init em_x270_init_spi(void) static inline void em_x270_init_spi(void) {} #endif -#if defined(CONFIG_SND_PXA2XX_AC97_LIB) +#if defined(CONFIG_SND_PXA2XX_LIB_AC97) static pxa2xx_audio_ops_t em_x270_ac97_info = { .reset_gpio = 113, }; -- cgit v1.1 From e6c3f4b89bf3698a6994d30de7a16ae395a81dab Mon Sep 17 00:00:00 2001 From: Tomas 'Sleep_Walker' Cech <sleep_walker@suse.cz> Date: Mon, 18 May 2009 15:24:14 +0200 Subject: [ARM] pxa/treo680: initial support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Tomáš Čech <sleep_walker@suse.cz> Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com> --- arch/arm/mach-pxa/Kconfig | 10 + arch/arm/mach-pxa/Makefile | 1 + arch/arm/mach-pxa/include/mach/treo680.h | 49 +++ arch/arm/mach-pxa/treo680.c | 612 +++++++++++++++++++++++++++++++ arch/arm/mm/mmu.c | 7 + 5 files changed, 679 insertions(+) create mode 100644 arch/arm/mach-pxa/include/mach/treo680.h create mode 100644 arch/arm/mach-pxa/treo680.c (limited to 'arch') diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index f4533f8..89c992b 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -401,6 +401,16 @@ config MACH_PALMZ72 Say Y here if you intend to run this kernel on Palm Zire 72 handheld computer. +config MACH_TREO680 + bool "Palm Treo 680" + default y + depends on ARCH_PXA_PALM + select PXA27x + select IWMMXT + help + Say Y here if you intend to run this kernel on Palm Treo 680 + smartphone. + config MACH_PALMLD bool "Palm LifeDrive" default y diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index d18ffef..d4c6122 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -62,6 +62,7 @@ obj-$(CONFIG_MACH_PALMT5) += palmt5.o obj-$(CONFIG_MACH_PALMTX) += palmtx.o obj-$(CONFIG_MACH_PALMLD) += palmld.o obj-$(CONFIG_MACH_PALMZ72) += palmz72.o +obj-$(CONFIG_MACH_TREO680) += treo680.o obj-$(CONFIG_ARCH_VIPER) += viper.o ifeq ($(CONFIG_MACH_ZYLONITE),y) diff --git a/arch/arm/mach-pxa/include/mach/treo680.h b/arch/arm/mach-pxa/include/mach/treo680.h new file mode 100644 index 0000000..af443b2 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/treo680.h @@ -0,0 +1,49 @@ +/* + * GPIOs and interrupts for Palm Treo 680 smartphone + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef _INCLUDE_TREO680_H_ +#define _INCLUDE_TREO680_H_ + +/* GPIOs */ +#define GPIO_NR_TREO680_POWER_DETECT 0 +#define GPIO_NR_TREO680_AMP_EN 27 +#define GPIO_NR_TREO680_KEYB_BL 24 +#define GPIO_NR_TREO680_VIBRATE_EN 44 +#define GPIO_NR_TREO680_GREEN_LED 20 +#define GPIO_NR_TREO680_RED_LED 79 +#define GPIO_NR_TREO680_SD_DETECT_N 113 +#define GPIO_NR_TREO680_SD_READONLY 33 +#define GPIO_NR_TREO680_EP_DETECT_N 116 +#define GPIO_NR_TREO680_SD_POWER 42 +#define GPIO_NR_TREO680_USB_DETECT 1 +#define GPIO_NR_TREO680_USB_PULLUP 114 +#define GPIO_NR_TREO680_GSM_POWER 40 +#define GPIO_NR_TREO680_GSM_RESET 87 +#define GPIO_NR_TREO680_GSM_WAKE 57 +#define GPIO_NR_TREO680_GSM_HOST_WAKE 14 +#define GPIO_NR_TREO680_GSM_TRIGGER 10 +#define GPIO_NR_TREO680_BT_EN 43 +#define GPIO_NR_TREO680_IR_EN 115 +#define GPIO_NR_TREO680_IR_TXD 47 +#define GPIO_NR_TREO680_BL_POWER 38 +#define GPIO_NR_TREO680_LCD_POWER 25 + +/* Various addresses */ +#define TREO680_PHYS_RAM_START 0xa0000000 +#define TREO680_PHYS_IO_START 0x40000000 +#define TREO680_STR_BASE 0xa2000000 + +/* BACKLIGHT */ +#define TREO680_MAX_INTENSITY 254 +#define TREO680_DEFAULT_INTENSITY 160 +#define TREO680_LIMIT_MASK 0x7F +#define TREO680_PRESCALER 63 +#define TREO680_PERIOD_NS 3500 + +#endif diff --git a/arch/arm/mach-pxa/treo680.c b/arch/arm/mach-pxa/treo680.c new file mode 100644 index 0000000..a06f19e --- /dev/null +++ b/arch/arm/mach-pxa/treo680.c @@ -0,0 +1,612 @@ +/* + * Hardware definitions for Palm Treo 680 + * + * Author: Tomas Cech <sleep_walker@suse.cz> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * (find more info at www.hackndev.com) + * + */ + +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/irq.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> +#include <linux/pda_power.h> +#include <linux/pwm_backlight.h> +#include <linux/gpio.h> +#include <linux/wm97xx_batt.h> +#include <linux/power_supply.h> +#include <linux/sysdev.h> +#include <linux/w1-gpio.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <mach/pxa27x.h> +#include <mach/pxa27x-udc.h> +#include <mach/audio.h> +#include <mach/treo680.h> +#include <mach/mmc.h> +#include <mach/pxafb.h> +#include <mach/irda.h> +#include <mach/pxa27x_keypad.h> +#include <mach/udc.h> +#include <mach/ohci.h> +#include <mach/pxa2xx-regs.h> +#include <mach/palmasoc.h> +#include <mach/camera.h> + +#include <sound/pxa2xx-lib.h> + +#include "generic.h" +#include "devices.h" + +/****************************************************************************** + * Pin configuration + ******************************************************************************/ +static unsigned long treo680_pin_config[] __initdata = { + /* MMC */ + GPIO32_MMC_CLK, + GPIO92_MMC_DAT_0, + GPIO109_MMC_DAT_1, + GPIO110_MMC_DAT_2, + GPIO111_MMC_DAT_3, + GPIO112_MMC_CMD, + GPIO33_GPIO, /* SD read only */ + GPIO113_GPIO, /* SD detect */ + + /* AC97 */ + GPIO28_AC97_BITCLK, + GPIO29_AC97_SDATA_IN_0, + GPIO30_AC97_SDATA_OUT, + GPIO31_AC97_SYNC, + GPIO89_AC97_SYSCLK, + GPIO95_AC97_nRESET, + + /* IrDA */ + GPIO46_FICP_RXD, + GPIO47_FICP_TXD, + + /* PWM */ + GPIO16_PWM0_OUT, + + /* USB */ + GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH, /* usb detect */ + + /* MATRIX KEYPAD */ + GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH, + GPIO101_KP_MKIN_1, + GPIO102_KP_MKIN_2, + GPIO97_KP_MKIN_3, + GPIO98_KP_MKIN_4, + GPIO99_KP_MKIN_5, + GPIO91_KP_MKIN_6, + GPIO13_KP_MKIN_7, + GPIO103_KP_MKOUT_0 | MFP_LPM_DRIVE_HIGH, + GPIO104_KP_MKOUT_1, + GPIO105_KP_MKOUT_2, + GPIO106_KP_MKOUT_3, + GPIO107_KP_MKOUT_4, + GPIO108_KP_MKOUT_5, + GPIO96_KP_MKOUT_6, + GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH, /* Hotsync button */ + + /* LCD */ + GPIO58_LCD_LDD_0, + GPIO59_LCD_LDD_1, + GPIO60_LCD_LDD_2, + GPIO61_LCD_LDD_3, + GPIO62_LCD_LDD_4, + GPIO63_LCD_LDD_5, + GPIO64_LCD_LDD_6, + GPIO65_LCD_LDD_7, + GPIO66_LCD_LDD_8, + GPIO67_LCD_LDD_9, + GPIO68_LCD_LDD_10, + GPIO69_LCD_LDD_11, + GPIO70_LCD_LDD_12, + GPIO71_LCD_LDD_13, + GPIO72_LCD_LDD_14, + GPIO73_LCD_LDD_15, + GPIO74_LCD_FCLK, + GPIO75_LCD_LCLK, + GPIO76_LCD_PCLK, + + /* Quick Capture Interface */ + GPIO84_CIF_FV, + GPIO85_CIF_LV, + GPIO53_CIF_MCLK, + GPIO54_CIF_PCLK, + GPIO81_CIF_DD_0, + GPIO55_CIF_DD_1, + GPIO51_CIF_DD_2, + GPIO50_CIF_DD_3, + GPIO52_CIF_DD_4, + GPIO48_CIF_DD_5, + GPIO17_CIF_DD_6, + GPIO12_CIF_DD_7, + + /* I2C */ + GPIO117_I2C_SCL, + GPIO118_I2C_SDA, + + /* GSM */ + GPIO14_GPIO | WAKEUP_ON_EDGE_BOTH, /* GSM host wake up */ + GPIO34_FFUART_RXD, + GPIO35_FFUART_CTS, + GPIO39_FFUART_TXD, + GPIO41_FFUART_RTS, + + /* MISC. */ + GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH, /* external power detect */ + GPIO15_GPIO | WAKEUP_ON_EDGE_BOTH, /* silent switch */ + GPIO116_GPIO, /* headphone detect */ + GPIO11_GPIO | WAKEUP_ON_EDGE_BOTH, /* bluetooth host wake up */ +}; + +/****************************************************************************** + * SD/MMC card controller + ******************************************************************************/ +static int treo680_mci_init(struct device *dev, + irq_handler_t treo680_detect_int, void *data) +{ + int err = 0; + + /* Setup an interrupt for detecting card insert/remove events */ + err = gpio_request(GPIO_NR_TREO680_SD_DETECT_N, "SD IRQ"); + + if (err) + goto err; + + err = gpio_direction_input(GPIO_NR_TREO680_SD_DETECT_N); + if (err) + goto err2; + + err = request_irq(gpio_to_irq(GPIO_NR_TREO680_SD_DETECT_N), + treo680_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM | + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, + "SD/MMC card detect", data); + + if (err) { + dev_err(dev, "%s: cannot request SD/MMC card detect IRQ\n", + __func__); + goto err2; + } + + err = gpio_request(GPIO_NR_TREO680_SD_POWER, "SD_POWER"); + if (err) + goto err3; + + err = gpio_direction_output(GPIO_NR_TREO680_SD_POWER, 1); + if (err) + goto err4; + + err = gpio_request(GPIO_NR_TREO680_SD_READONLY, "SD_READONLY"); + if (err) + goto err4; + + err = gpio_direction_input(GPIO_NR_TREO680_SD_READONLY); + if (err) + goto err5; + + return 0; + +err5: + gpio_free(GPIO_NR_TREO680_SD_READONLY); +err4: + gpio_free(GPIO_NR_TREO680_SD_POWER); +err3: + free_irq(gpio_to_irq(GPIO_NR_TREO680_SD_DETECT_N), data); +err2: + gpio_free(GPIO_NR_TREO680_SD_DETECT_N); +err: + return err; +} + +static void treo680_mci_exit(struct device *dev, void *data) +{ + gpio_free(GPIO_NR_TREO680_SD_READONLY); + gpio_free(GPIO_NR_TREO680_SD_POWER); + free_irq(gpio_to_irq(GPIO_NR_TREO680_SD_DETECT_N), data); + gpio_free(GPIO_NR_TREO680_SD_DETECT_N); +} + +static void treo680_mci_power(struct device *dev, unsigned int vdd) +{ + struct pxamci_platform_data *p_d = dev->platform_data; + gpio_set_value(GPIO_NR_TREO680_SD_POWER, p_d->ocr_mask & (1 << vdd)); +} + +static int treo680_mci_get_ro(struct device *dev) +{ + return gpio_get_value(GPIO_NR_TREO680_SD_READONLY); +} + +static struct pxamci_platform_data treo680_mci_platform_data = { + .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, + .setpower = treo680_mci_power, + .get_ro = treo680_mci_get_ro, + .init = treo680_mci_init, + .exit = treo680_mci_exit, +}; + +/****************************************************************************** + * GPIO keyboard + ******************************************************************************/ +static unsigned int treo680_matrix_keys[] = { + KEY(0, 0, KEY_F8), /* Red/Off/Power */ + KEY(0, 1, KEY_LEFT), + KEY(0, 2, KEY_LEFTCTRL), /* Alternate */ + KEY(0, 3, KEY_L), + KEY(0, 4, KEY_A), + KEY(0, 5, KEY_Q), + KEY(0, 6, KEY_P), + + KEY(1, 0, KEY_RIGHTCTRL), /* Menu */ + KEY(1, 1, KEY_RIGHT), + KEY(1, 2, KEY_LEFTSHIFT), /* Left shift */ + KEY(1, 3, KEY_Z), + KEY(1, 4, KEY_S), + KEY(1, 5, KEY_W), + + KEY(2, 0, KEY_F1), /* Phone */ + KEY(2, 1, KEY_UP), + KEY(2, 2, KEY_0), + KEY(2, 3, KEY_X), + KEY(2, 4, KEY_D), + KEY(2, 5, KEY_E), + + KEY(3, 0, KEY_F10), /* Calendar */ + KEY(3, 1, KEY_DOWN), + KEY(3, 2, KEY_SPACE), + KEY(3, 3, KEY_C), + KEY(3, 4, KEY_F), + KEY(3, 5, KEY_R), + + KEY(4, 0, KEY_F12), /* Mail */ + KEY(4, 1, KEY_KPENTER), + KEY(4, 2, KEY_RIGHTALT), /* Alt */ + KEY(4, 3, KEY_V), + KEY(4, 4, KEY_G), + KEY(4, 5, KEY_T), + + KEY(5, 0, KEY_F9), /* Home */ + KEY(5, 1, KEY_PAGEUP), /* Side up */ + KEY(5, 2, KEY_DOT), + KEY(5, 3, KEY_B), + KEY(5, 4, KEY_H), + KEY(5, 5, KEY_Y), + + KEY(6, 0, KEY_TAB), /* Side Activate */ + KEY(6, 1, KEY_PAGEDOWN), /* Side down */ + KEY(6, 2, KEY_ENTER), + KEY(6, 3, KEY_N), + KEY(6, 4, KEY_J), + KEY(6, 5, KEY_U), + + KEY(7, 0, KEY_F6), /* Green/Call */ + KEY(7, 1, KEY_O), + KEY(7, 2, KEY_BACKSPACE), + KEY(7, 3, KEY_M), + KEY(7, 4, KEY_K), + KEY(7, 5, KEY_I), +}; + +static struct pxa27x_keypad_platform_data treo680_keypad_platform_data = { + .matrix_key_rows = 8, + .matrix_key_cols = 7, + .matrix_key_map = treo680_matrix_keys, + .matrix_key_map_size = ARRAY_SIZE(treo680_matrix_keys), + .direct_key_map = { KEY_CONNECT }, + .direct_key_num = 1, + + .debounce_interval = 30, +}; + +/****************************************************************************** + * aSoC audio + ******************************************************************************/ + +static pxa2xx_audio_ops_t treo680_ac97_pdata = { + .reset_gpio = 95, +}; + +/****************************************************************************** + * Backlight + ******************************************************************************/ +static int treo680_backlight_init(struct device *dev) +{ + int ret; + + ret = gpio_request(GPIO_NR_TREO680_BL_POWER, "BL POWER"); + if (ret) + goto err; + ret = gpio_direction_output(GPIO_NR_TREO680_BL_POWER, 0); + if (ret) + goto err2; + ret = gpio_request(GPIO_NR_TREO680_LCD_POWER, "LCD POWER"); + if (ret) + goto err2; + ret = gpio_direction_output(GPIO_NR_TREO680_LCD_POWER, 0); + if (ret) + goto err3; + + return 0; +err3: + gpio_free(GPIO_NR_TREO680_LCD_POWER); +err2: + gpio_free(GPIO_NR_TREO680_BL_POWER); +err: + return ret; +} + +static int treo680_backlight_notify(int brightness) +{ + gpio_set_value(GPIO_NR_TREO680_BL_POWER, brightness); + return TREO680_MAX_INTENSITY - brightness; +}; + +static void treo680_backlight_exit(struct device *dev) +{ + gpio_free(GPIO_NR_TREO680_BL_POWER); + gpio_free(GPIO_NR_TREO680_LCD_POWER); +} + +static struct platform_pwm_backlight_data treo680_backlight_data = { + .pwm_id = 0, + .max_brightness = TREO680_MAX_INTENSITY, + .dft_brightness = TREO680_DEFAULT_INTENSITY, + .pwm_period_ns = TREO680_PERIOD_NS, + .init = treo680_backlight_init, + .notify = treo680_backlight_notify, + .exit = treo680_backlight_exit, +}; + +static struct platform_device treo680_backlight = { + .name = "pwm-backlight", + .dev = { + .parent = &pxa27x_device_pwm0.dev, + .platform_data = &treo680_backlight_data, + }, +}; + +/****************************************************************************** + * IrDA + ******************************************************************************/ +static void treo680_transceiver_mode(struct device *dev, int mode) +{ + gpio_set_value(GPIO_NR_TREO680_IR_EN, mode & IR_OFF); + pxa2xx_transceiver_mode(dev, mode); +} + +static int treo680_irda_startup(struct device *dev) +{ + int err; + + err = gpio_request(GPIO_NR_TREO680_IR_EN, "Ir port disable"); + if (err) + goto err1; + + err = gpio_direction_output(GPIO_NR_TREO680_IR_EN, 1); + if (err) + goto err2; + + return 0; + +err2: + dev_err(dev, "treo680_irda: cannot change IR gpio direction\n"); + gpio_free(GPIO_NR_TREO680_IR_EN); +err1: + dev_err(dev, "treo680_irda: cannot allocate IR gpio\n"); + return err; +} + +static void treo680_irda_shutdown(struct device *dev) +{ + gpio_free(GPIO_NR_TREO680_AMP_EN); +} + +static struct pxaficp_platform_data treo680_ficp_info = { + .transceiver_cap = IR_FIRMODE | IR_SIRMODE | IR_OFF, + .startup = treo680_irda_startup, + .shutdown = treo680_irda_shutdown, + .transceiver_mode = treo680_transceiver_mode, +}; + +/****************************************************************************** + * UDC + ******************************************************************************/ +static struct pxa2xx_udc_mach_info treo680_udc_info __initdata = { + .gpio_vbus = GPIO_NR_TREO680_USB_DETECT, + .gpio_vbus_inverted = 1, + .gpio_pullup = GPIO_NR_TREO680_USB_PULLUP, +}; + + +/****************************************************************************** + * USB host + ******************************************************************************/ +static struct pxaohci_platform_data treo680_ohci_info = { + .port_mode = PMM_PERPORT_MODE, + .flags = ENABLE_PORT1 | ENABLE_PORT3, + .power_budget = 0, +}; + +/****************************************************************************** + * Power supply + ******************************************************************************/ +static int power_supply_init(struct device *dev) +{ + int ret; + + ret = gpio_request(GPIO_NR_TREO680_POWER_DETECT, "CABLE_STATE_AC"); + if (ret) + goto err1; + ret = gpio_direction_input(GPIO_NR_TREO680_POWER_DETECT); + if (ret) + goto err2; + + return 0; + +err2: + gpio_free(GPIO_NR_TREO680_POWER_DETECT); +err1: + return ret; +} + +static int treo680_is_ac_online(void) +{ + return gpio_get_value(GPIO_NR_TREO680_POWER_DETECT); +} + +static void power_supply_exit(struct device *dev) +{ + gpio_free(GPIO_NR_TREO680_POWER_DETECT); +} + +static char *treo680_supplicants[] = { + "main-battery", +}; + +static struct pda_power_pdata power_supply_info = { + .init = power_supply_init, + .is_ac_online = treo680_is_ac_online, + .exit = power_supply_exit, + .supplied_to = treo680_supplicants, + .num_supplicants = ARRAY_SIZE(treo680_supplicants), +}; + +static struct platform_device power_supply = { + .name = "pda-power", + .id = -1, + .dev = { + .platform_data = &power_supply_info, + }, +}; + +/****************************************************************************** + * Vibra and LEDs + ******************************************************************************/ +static struct gpio_led gpio_leds[] = { + { + .name = "treo680:vibra:vibra", + .default_trigger = "none", + .gpio = GPIO_NR_TREO680_VIBRATE_EN, + }, + { + .name = "treo680:green:led", + .default_trigger = "mmc0", + .gpio = GPIO_NR_TREO680_GREEN_LED, + }, + { + .name = "treo680:keybbl:keybbl", + .default_trigger = "none", + .gpio = GPIO_NR_TREO680_KEYB_BL, + }, +}; + +static struct gpio_led_platform_data gpio_led_info = { + .leds = gpio_leds, + .num_leds = ARRAY_SIZE(gpio_leds), +}; + +static struct platform_device treo680_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &gpio_led_info, + } +}; + + +/****************************************************************************** + * Framebuffer + ******************************************************************************/ +/* TODO: add support for 324x324 */ +static struct pxafb_mode_info treo680_lcd_modes[] = { +{ + .pixclock = 86538, + .xres = 320, + .yres = 320, + .bpp = 16, + + .left_margin = 20, + .right_margin = 8, + .upper_margin = 8, + .lower_margin = 5, + + .hsync_len = 4, + .vsync_len = 1, +}, +}; + +static struct pxafb_mach_info treo680_lcd_screen = { + .modes = treo680_lcd_modes, + .num_modes = ARRAY_SIZE(treo680_lcd_modes), + .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL, +}; + +/****************************************************************************** + * Power management - standby + ******************************************************************************/ +static void __init treo680_pm_init(void) +{ + static u32 resume[] = { + 0xe3a00101, /* mov r0, #0x40000000 */ + 0xe380060f, /* orr r0, r0, #0x00f00000 */ + 0xe590f008, /* ldr pc, [r0, #0x08] */ + }; + + /* this is where the bootloader jumps */ + memcpy(phys_to_virt(TREO680_STR_BASE), resume, sizeof(resume)); +} + +/****************************************************************************** + * Machine init + ******************************************************************************/ +static struct platform_device *devices[] __initdata = { + &treo680_backlight, + &treo680_leds, + &power_supply, +}; + +/* setup udc GPIOs initial state */ +static void __init treo680_udc_init(void) +{ + if (!gpio_request(GPIO_NR_TREO680_USB_PULLUP, "UDC Vbus")) { + gpio_direction_output(GPIO_NR_TREO680_USB_PULLUP, 1); + gpio_free(GPIO_NR_TREO680_USB_PULLUP); + } +} + +static void __init treo680_init(void) +{ + treo680_pm_init(); + pxa2xx_mfp_config(ARRAY_AND_SIZE(treo680_pin_config)); + pxa_set_keypad_info(&treo680_keypad_platform_data); + set_pxa_fb_info(&treo680_lcd_screen); + pxa_set_mci_info(&treo680_mci_platform_data); + treo680_udc_init(); + pxa_set_udc_info(&treo680_udc_info); + pxa_set_ac97_info(&treo680_ac97_pdata); + pxa_set_ficp_info(&treo680_ficp_info); + pxa_set_ohci_info(&treo680_ohci_info); + + platform_add_devices(devices, ARRAY_SIZE(devices)); +} + +MACHINE_START(TREO680, "Palm Treo 680") + .phys_io = TREO680_PHYS_IO_START, + .io_pg_offst = io_p2v(0x40000000), + .boot_params = 0xa0000100, + .map_io = pxa_map_io, + .init_irq = pxa27x_init_irq, + .timer = &pxa_timer, + .init_machine = treo680_init, +MACHINE_END diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index e6344ec..0b91bb2 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -835,6 +835,13 @@ void __init reserve_node_zero(pg_data_t *pgdat) BOOTMEM_EXCLUSIVE); } + if (machine_is_treo680()) { + reserve_bootmem_node(pgdat, 0xa0000000, 0x1000, + BOOTMEM_EXCLUSIVE); + reserve_bootmem_node(pgdat, 0xa2000000, 0x1000, + BOOTMEM_EXCLUSIVE); + } + if (machine_is_palmt5()) reserve_bootmem_node(pgdat, 0xa0200000, 0x1000, BOOTMEM_EXCLUSIVE); -- cgit v1.1 From 6ea0414fc748ab5b1d83a414c7ee3a60190363aa Mon Sep 17 00:00:00 2001 From: Philipp Zabel <philipp.zabel@gmail.com> Date: Thu, 28 May 2009 07:15:18 +0200 Subject: [ARM] pxa/hx4700: add Maxim 1587A voltage regulator On this board, the PXA270 CPU voltage VCC_CORE is provided by a Maxim 1587A voltage regulator configured to provide 1.55 V maximum voltage for 624 MHz operation. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com> --- arch/arm/mach-pxa/hx4700.c | 41 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 41 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index 7fff467..81359d5 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -30,6 +30,7 @@ #include <linux/pwm_backlight.h> #include <linux/regulator/bq24022.h> #include <linux/regulator/machine.h> +#include <linux/regulator/max1586.h> #include <linux/spi/ads7846.h> #include <linux/spi/spi.h> #include <linux/usb/gpio_vbus.h> @@ -775,6 +776,45 @@ static struct platform_device strataflash = { }; /* + * Maxim MAX1587A on PI2C + */ + +static struct regulator_consumer_supply max1587a_consumer = { + .supply = "vcc_core", +}; + +static struct regulator_init_data max1587a_v3_info = { + .constraints = { + .name = "vcc_core range", + .min_uV = 900000, + .max_uV = 1705000, + .always_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &max1587a_consumer, +}; + +static struct max1586_subdev_data max1587a_subdev = { + .name = "vcc_core", + .id = MAX1586_V3, + .platform_data = &max1587a_v3_info, +}; + +static struct max1586_platform_data max1587a_info = { + .num_subdevs = 1, + .subdevs = &max1587a_subdev, + .v3_gain = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */ +}; + +static struct i2c_board_info __initdata pi2c_board_info[] = { + { + I2C_BOARD_INFO("max1586", 0x14), + .platform_data = &max1587a_info, + }, +}; + +/* * PCMCIA */ @@ -828,6 +868,7 @@ static void __init hx4700_init(void) pxa_set_ficp_info(&ficp_info); pxa27x_set_i2c_power_info(NULL); pxa_set_i2c_info(NULL); + i2c_register_board_info(1, ARRAY_AND_SIZE(pi2c_board_info)); pxa2xx_set_spi_info(2, &pxa_ssp2_master_info); spi_register_board_info(ARRAY_AND_SIZE(tsc2046_board_info)); -- cgit v1.1 From 9752e14898102063a67b44e6db5b758092e769a4 Mon Sep 17 00:00:00 2001 From: Robert Jarzmik <robert.jarzmik@free.fr> Date: Thu, 30 Apr 2009 11:53:30 +0800 Subject: [ARM] pxa/mioa701: add Maxim 1586 voltage regulator On this board, the PXA272 CPU voltage VCC_CORE is provided by a Maxim 1586 voltage regulator. Use the regulator framework to provide VCC_CORE control. When cpufreq will be updated to ask for vcc_core, this will optimize power drained by the board. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Eric Miao <eric.miao@marvell.com> --- arch/arm/mach-pxa/mioa701.c | 41 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 41 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index 4dc8c2e..99e5a88 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -37,6 +37,7 @@ #include <linux/wm97xx_batt.h> #include <linux/mtd/physmap.h> #include <linux/usb/gpio_vbus.h> +#include <linux/regulator/max1586.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -717,6 +718,37 @@ static struct wm97xx_batt_info mioa701_battery_data = { }; /* + * Voltage regulation + */ +static struct regulator_consumer_supply max1586_consumers[] = { + { + .supply = "vcc_core", + } +}; + +static struct regulator_init_data max1586_v3_info = { + .constraints = { + .name = "vcc_core range", + .min_uV = 1000000, + .max_uV = 1705000, + .always_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + }, + .num_consumer_supplies = ARRAY_SIZE(max1586_consumers), + .consumer_supplies = max1586_consumers, +}; + +static struct max1586_subdev_data max1586_subdevs[] = { + { .name = "vcc_core", .id = MAX1586_V3, + .platform_data = &max1586_v3_info }, +}; + +static struct max1586_platform_data max1586_info = { + .subdevs = max1586_subdevs, + .num_subdevs = ARRAY_SIZE(max1586_subdevs), +}; + +/* * Camera interface */ struct pxacamera_platform_data mioa701_pxacamera_platform_data = { @@ -725,6 +757,13 @@ struct pxacamera_platform_data mioa701_pxacamera_platform_data = { .mclk_10khz = 5000, }; +static struct i2c_board_info __initdata mioa701_pi2c_devices[] = { + { + I2C_BOARD_INFO("max1586", 0x14), + .platform_data = &max1586_info, + }, +}; + static struct soc_camera_link iclink = { .bus_id = 0, /* Must match id in pxa27x_device_camera in device.c */ }; @@ -825,7 +864,9 @@ static void __init mioa701_machine_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); gsm_init(); + i2c_register_board_info(1, ARRAY_AND_SIZE(mioa701_pi2c_devices)); pxa_set_i2c_info(&i2c_pdata); + pxa27x_set_i2c_power_info(NULL); pxa_set_camera_info(&mioa701_pxacamera_platform_data); i2c_register_board_info(0, ARRAY_AND_SIZE(mioa701_i2c_devices)); } -- cgit v1.1 From e567b74caff03c0ed66b3d3e11c0acd17fbcfb9a Mon Sep 17 00:00:00 2001 From: Philipp Zabel <philipp.zabel@gmail.com> Date: Thu, 28 May 2009 07:15:17 +0200 Subject: [ARM] pxa/mioa701: add V3 gain configuration for Maxim 1586 voltage regulator Maxim 1586 V3 gain can be configured by external resistors (R24, R25) connected to the FB3 pin. To avoid accidental overvoltage, it now requires this gain to be configured explicitly. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Eric Miao <eric.miao@marvell.com> --- arch/arm/mach-pxa/mioa701.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index 99e5a88..2d28132 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -746,6 +746,7 @@ static struct max1586_subdev_data max1586_subdevs[] = { static struct max1586_platform_data max1586_info = { .subdevs = max1586_subdevs, .num_subdevs = ARRAY_SIZE(max1586_subdevs), + .v3_gain = MAX1586_GAIN_NO_R24, /* 700..1475 mV */ }; /* -- cgit v1.1 From 8776b268c6b0b671c2c744b06fee021b6da3e45f Mon Sep 17 00:00:00 2001 From: Mark Brown <broonie@opensource.wolfsonmicro.com> Date: Sun, 26 Apr 2009 12:53:58 +0100 Subject: [ARM] pxa: register wm8731 explicitly for corgi and poodle The wm8731 driver has been converted to register using the standard I2C device registration mechanism so we can now do the registration in the arch/arm code as normal. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com> --- arch/arm/mach-pxa/corgi.c | 6 ++++++ arch/arm/mach-pxa/poodle.c | 6 ++++++ 2 files changed, 12 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index 962dda2..5363e1a 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -23,6 +23,7 @@ #include <linux/pm.h> #include <linux/gpio.h> #include <linux/backlight.h> +#include <linux/i2c.h> #include <linux/io.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> @@ -600,6 +601,10 @@ static struct platform_device *devices[] __initdata = { &sharpsl_rom_device, }; +static struct i2c_board_info __initdata corgi_i2c_devices[] = { + { I2C_BOARD_INFO("wm8731", 0x1b) }, +}; + static void corgi_poweroff(void) { if (!machine_is_corgi()) @@ -634,6 +639,7 @@ static void __init corgi_init(void) pxa_set_mci_info(&corgi_mci_platform_data); pxa_set_ficp_info(&corgi_ficp_platform_data); pxa_set_i2c_info(NULL); + i2c_register_board_info(0, ARRAY_AND_SIZE(corgi_i2c_devices)); platform_scoop_config = &corgi_pcmcia_config; diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index ac431ed..9352d4a 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -22,6 +22,7 @@ #include <linux/delay.h> #include <linux/mtd/physmap.h> #include <linux/gpio.h> +#include <linux/i2c.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> #include <linux/mtd/sharpsl.h> @@ -486,6 +487,10 @@ static struct platform_device *devices[] __initdata = { &sharpsl_rom_device, }; +static struct i2c_board_info __initdata poodle_i2c_devices[] = { + { I2C_BOARD_INFO("wm8731", 0x1b) }, +}; + static void poodle_poweroff(void) { arm_machine_restart('h', NULL); @@ -519,6 +524,7 @@ static void __init poodle_init(void) pxa_set_mci_info(&poodle_mci_platform_data); pxa_set_ficp_info(&poodle_ficp_platform_data); pxa_set_i2c_info(NULL); + i2c_register_board_info(0, ARRAY_AND_SIZE(poodle_i2c_devices)); poodle_init_spi(); } -- cgit v1.1 From 97de6ad196db75a26077171014493c9d26be8a5d Mon Sep 17 00:00:00 2001 From: Tony Luck <tony.luck@intel.com> Date: Mon, 15 Jun 2009 16:11:43 -0700 Subject: [IA64] hook up new rt_tgsigqueueinfo syscall Assign syscall #1321 for rt_tgsigqueueinfo. Signed-off-by: Tony Luck <tony.luck@intel.com> --- arch/ia64/include/asm/unistd.h | 3 ++- arch/ia64/kernel/entry.S | 1 + 2 files changed, 3 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/ia64/include/asm/unistd.h b/arch/ia64/include/asm/unistd.h index 10a9eb0..61474f9 100644 --- a/arch/ia64/include/asm/unistd.h +++ b/arch/ia64/include/asm/unistd.h @@ -310,11 +310,12 @@ #define __NR_inotify_init1 1318 #define __NR_preadv 1319 #define __NR_pwritev 1320 +#define __NR_rt_tgsigqueueinfo 1321 #ifdef __KERNEL__ -#define NR_syscalls 297 /* length of syscall table */ +#define NR_syscalls 298 /* length of syscall table */ /* * The following defines stop scripts/checksyscalls.sh from complaining about diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S index 7bebac0..d0e7d37 100644 --- a/arch/ia64/kernel/entry.S +++ b/arch/ia64/kernel/entry.S @@ -1805,6 +1805,7 @@ sys_call_table: data8 sys_inotify_init1 data8 sys_preadv data8 sys_pwritev // 1320 + data8 sys_rt_tgsigqueueinfo .org sys_call_table + 8*NR_syscalls // guard against failures to increase NR_syscalls #endif /* __IA64_ASM_PARAVIRTUALIZED_NATIVE */ -- cgit v1.1 From e56e2dcd381d9ec35379328f332221581eda4787 Mon Sep 17 00:00:00 2001 From: Tony Luck <tony.luck@intel.com> Date: Mon, 15 Jun 2009 16:22:09 -0700 Subject: [IA64] ia64 does not need umount2() syscall ia64 doesn't have old and new versions of the umount system call. It just has the new version. Fixes this build warning: <stdin>:395:2: warning: #warning syscall umount2 not implemented Signed-off-by: Tony Luck <tony.luck@intel.com> --- arch/ia64/include/asm/unistd.h | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/ia64/include/asm/unistd.h b/arch/ia64/include/asm/unistd.h index 61474f9..5a5347f 100644 --- a/arch/ia64/include/asm/unistd.h +++ b/arch/ia64/include/asm/unistd.h @@ -329,6 +329,7 @@ #define __IGNORE_utime /* utimes() */ #define __IGNORE_getpgrp /* getpgid() */ #define __IGNORE_vfork /* clone() */ +#define __IGNORE_umount2 /* umount() */ #define __ARCH_WANT_SYS_RT_SIGACTION #define __ARCH_WANT_SYS_RT_SIGSUSPEND -- cgit v1.1 From 70298c6e6c1ba68346336b4ea54bd5c0abbf73c8 Mon Sep 17 00:00:00 2001 From: "Zhang, Yanmin" <yanmin_zhang@linux.intel.com> Date: Tue, 16 Jun 2009 13:34:38 +0800 Subject: PCI AER: support Multiple Error Received and no error source id Based on PCI Express AER specs, a root port might receive multiple TLP errors while it could only save a correctable error source id and an uncorrectable error source id at the same time. In addition, some root port hardware might be unable to provide a correct source id, i.e., the source id, or the bus id part of the source id provided by root port might be equal to 0. The patchset implements the support in kernel by searching the device tree under the root port. Patch 1 changes parameter cb of function pci_walk_bus to return a value. When cb return non-zero, pci_walk_bus stops more searching on the device tree. Reviewed-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Zhang Yanmin <yanmin_zhang@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> --- arch/powerpc/platforms/pseries/eeh_driver.c | 38 ++++++++++++++++++----------- 1 file changed, 24 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/pseries/eeh_driver.c b/arch/powerpc/platforms/pseries/eeh_driver.c index 9a2a6e3..0e8db67 100644 --- a/arch/powerpc/platforms/pseries/eeh_driver.c +++ b/arch/powerpc/platforms/pseries/eeh_driver.c @@ -122,7 +122,7 @@ static void eeh_enable_irq(struct pci_dev *dev) * passed back in "userdata". */ -static void eeh_report_error(struct pci_dev *dev, void *userdata) +static int eeh_report_error(struct pci_dev *dev, void *userdata) { enum pci_ers_result rc, *res = userdata; struct pci_driver *driver = dev->driver; @@ -130,19 +130,21 @@ static void eeh_report_error(struct pci_dev *dev, void *userdata) dev->error_state = pci_channel_io_frozen; if (!driver) - return; + return 0; eeh_disable_irq(dev); if (!driver->err_handler || !driver->err_handler->error_detected) - return; + return 0; rc = driver->err_handler->error_detected (dev, pci_channel_io_frozen); /* A driver that needs a reset trumps all others */ if (rc == PCI_ERS_RESULT_NEED_RESET) *res = rc; if (*res == PCI_ERS_RESULT_NONE) *res = rc; + + return 0; } /** @@ -153,7 +155,7 @@ static void eeh_report_error(struct pci_dev *dev, void *userdata) * Cumulative response passed back in "userdata". */ -static void eeh_report_mmio_enabled(struct pci_dev *dev, void *userdata) +static int eeh_report_mmio_enabled(struct pci_dev *dev, void *userdata) { enum pci_ers_result rc, *res = userdata; struct pci_driver *driver = dev->driver; @@ -161,26 +163,28 @@ static void eeh_report_mmio_enabled(struct pci_dev *dev, void *userdata) if (!driver || !driver->err_handler || !driver->err_handler->mmio_enabled) - return; + return 0; rc = driver->err_handler->mmio_enabled (dev); /* A driver that needs a reset trumps all others */ if (rc == PCI_ERS_RESULT_NEED_RESET) *res = rc; if (*res == PCI_ERS_RESULT_NONE) *res = rc; + + return 0; } /** * eeh_report_reset - tell device that slot has been reset */ -static void eeh_report_reset(struct pci_dev *dev, void *userdata) +static int eeh_report_reset(struct pci_dev *dev, void *userdata) { enum pci_ers_result rc, *res = userdata; struct pci_driver *driver = dev->driver; if (!driver) - return; + return 0; dev->error_state = pci_channel_io_normal; @@ -188,35 +192,39 @@ static void eeh_report_reset(struct pci_dev *dev, void *userdata) if (!driver->err_handler || !driver->err_handler->slot_reset) - return; + return 0; rc = driver->err_handler->slot_reset(dev); if ((*res == PCI_ERS_RESULT_NONE) || (*res == PCI_ERS_RESULT_RECOVERED)) *res = rc; if (*res == PCI_ERS_RESULT_DISCONNECT && rc == PCI_ERS_RESULT_NEED_RESET) *res = rc; + + return 0; } /** * eeh_report_resume - tell device to resume normal operations */ -static void eeh_report_resume(struct pci_dev *dev, void *userdata) +static int eeh_report_resume(struct pci_dev *dev, void *userdata) { struct pci_driver *driver = dev->driver; dev->error_state = pci_channel_io_normal; if (!driver) - return; + return 0; eeh_enable_irq(dev); if (!driver->err_handler || !driver->err_handler->resume) - return; + return 0; driver->err_handler->resume(dev); + + return 0; } /** @@ -226,22 +234,24 @@ static void eeh_report_resume(struct pci_dev *dev, void *userdata) * dead, and that no further recovery attempts will be made on it. */ -static void eeh_report_failure(struct pci_dev *dev, void *userdata) +static int eeh_report_failure(struct pci_dev *dev, void *userdata) { struct pci_driver *driver = dev->driver; dev->error_state = pci_channel_io_perm_failure; if (!driver) - return; + return 0; eeh_disable_irq(dev); if (!driver->err_handler || !driver->err_handler->error_detected) - return; + return 0; driver->err_handler->error_detected(dev, pci_channel_io_perm_failure); + + return 0; } /* ------------------------------------------------------- */ -- cgit v1.1 From f9cde5ffed17bf74f6bef042d99edb0622f58576 Mon Sep 17 00:00:00 2001 From: Gary Hade <garyhade@us.ibm.com> Date: Wed, 27 May 2009 12:41:44 -0700 Subject: x86/ACPI: Correct maximum allowed _CRS returned resources and warn if exceeded Issue a warning if _CRS returns too many resource descriptors to be accommodated by the fixed size resource array instances. If there is no transparent bridge on the root bus "too many" is the PCI_BUS_NUM_RESOURCES size of the resource array. Otherwise, the last 3 slots of the resource array must be excluded making the maximum (PCI_BUS_NUM_RESOURCES - 3). The current code: - is silent when _CRS returns too many resource descriptors and - incorrectly allows use of the last 3 slots of the resource array for a root bus with a transparent bridge Signed-off-by: Gary Hade <garyhade@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> --- arch/x86/pci/acpi.c | 33 +++++++++++++++++++++++++++------ 1 file changed, 27 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c index 8d898e0..16c3fda 100644 --- a/arch/x86/pci/acpi.c +++ b/arch/x86/pci/acpi.c @@ -38,15 +38,26 @@ count_resource(struct acpi_resource *acpi_res, void *data) struct acpi_resource_address64 addr; acpi_status status; - if (info->res_num >= PCI_BUS_NUM_RESOURCES) - return AE_OK; - status = resource_to_addr(acpi_res, &addr); if (ACPI_SUCCESS(status)) info->res_num++; return AE_OK; } +static int +bus_has_transparent_bridge(struct pci_bus *bus) +{ + struct pci_dev *dev; + + list_for_each_entry(dev, &bus->devices, bus_list) { + u16 class = dev->class >> 8; + + if (class == PCI_CLASS_BRIDGE_PCI && dev->transparent) + return true; + } + return false; +} + static acpi_status setup_resource(struct acpi_resource *acpi_res, void *data) { @@ -56,9 +67,7 @@ setup_resource(struct acpi_resource *acpi_res, void *data) acpi_status status; unsigned long flags; struct resource *root; - - if (info->res_num >= PCI_BUS_NUM_RESOURCES) - return AE_OK; + int max_root_bus_resources = PCI_BUS_NUM_RESOURCES; status = resource_to_addr(acpi_res, &addr); if (!ACPI_SUCCESS(status)) @@ -82,6 +91,18 @@ setup_resource(struct acpi_resource *acpi_res, void *data) res->end = res->start + addr.address_length - 1; res->child = NULL; + if (bus_has_transparent_bridge(info->bus)) + max_root_bus_resources -= 3; + if (info->res_num >= max_root_bus_resources) { + printk(KERN_WARNING "PCI: Failed to allocate 0x%lx-0x%lx " + "from %s for %s due to _CRS returning more than " + "%d resource descriptors\n", (unsigned long) res->start, + (unsigned long) res->end, root->name, info->name, + max_root_bus_resources); + info->res_num++; + return AE_OK; + } + if (insert_resource(root, res)) { printk(KERN_ERR "PCI: Failed to allocate 0x%lx-0x%lx " "from %s for %s\n", (unsigned long) res->start, -- cgit v1.1 From 3f1a567d8a4ed7a5d105bd049343606f5273b603 Mon Sep 17 00:00:00 2001 From: Ben Dooks <ben-linux@fluff.org> Date: Tue, 2 Jun 2009 09:31:03 +0100 Subject: [ARM] VIC: Fix resume sources usage The resume_mask wasn't being checked in vic_set_wake() to see if the IRQ was a valid wakeup source. Signed-off-by: Ben Dooks <ben-linux@fluff.org> --- arch/arm/common/vic.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c index 887c6eb..6ed8983 100644 --- a/arch/arm/common/vic.c +++ b/arch/arm/common/vic.c @@ -229,14 +229,18 @@ static int vic_set_wake(unsigned int irq, unsigned int on) { struct vic_device *v = vic_from_irq(irq); unsigned int off = irq & 31; + u32 bit = 1 << off; if (!v) return -EINVAL; + if (!(bit & v->resume_sources)) + return -EINVAL; + if (on) - v->resume_irqs |= 1 << off; + v->resume_irqs |= bit; else - v->resume_irqs &= ~(1 << off); + v->resume_irqs &= ~bit; return 0; } -- cgit v1.1 From 9492b272820ac8f32a6ad4fcabd571d8305a6d47 Mon Sep 17 00:00:00 2001 From: Huang Weiyi <weiyi.huang@gmail.com> Date: Tue, 16 Jun 2009 16:56:34 +0800 Subject: [ARM] S3C24XX: remove duplicated #include Remove duplicated #include in arch/arm/mach-s3c2410/usb-simtec.c. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> --- arch/arm/mach-s3c2410/usb-simtec.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c index 6cd9377..50e25fc 100644 --- a/arch/arm/mach-s3c2410/usb-simtec.c +++ b/arch/arm/mach-s3c2410/usb-simtec.c @@ -22,7 +22,6 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/device.h> -#include <linux/gpio.h> #include <linux/io.h> #include <asm/mach/arch.h> -- cgit v1.1 From 52da219e9664e537a745877b0efa7cf2b1ff2996 Mon Sep 17 00:00:00 2001 From: Mark Brown <broonie@opensource.wolfsonmicro.com> Date: Wed, 3 Jun 2009 20:08:38 +0100 Subject: [ARM] S3C64XX: Provide device for IIS ports This allows the S3C64XX IIS drivers to be converted to the standard driver model and allows fixes there for problems with attempting to acquire the clocks for the IIS blocks via the clock API. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> --- arch/arm/plat-s3c/Makefile | 1 + arch/arm/plat-s3c/dev-audio.c | 52 +++++++++++++++++++++++++++++++++++ arch/arm/plat-s3c/include/plat/devs.h | 4 ++- 3 files changed, 56 insertions(+), 1 deletion(-) create mode 100644 arch/arm/plat-s3c/dev-audio.c (limited to 'arch') diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile index 6106514..74bb7cb 100644 --- a/arch/arm/plat-s3c/Makefile +++ b/arch/arm/plat-s3c/Makefile @@ -34,6 +34,7 @@ obj-$(CONFIG_S3C_DEV_HSMMC) += dev-hsmmc.o obj-$(CONFIG_S3C_DEV_HSMMC1) += dev-hsmmc1.o obj-y += dev-i2c0.o obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o +obj-$(CONFIG_SND_S3C24XX_SOC) += dev-audio.o obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o obj-$(CONFIG_S3C_DEV_USB_HOST) += dev-usb.o obj-$(CONFIG_S3C_DEV_USB_HSOTG) += dev-usb-hsotg.o diff --git a/arch/arm/plat-s3c/dev-audio.c b/arch/arm/plat-s3c/dev-audio.c new file mode 100644 index 0000000..ccdd815 --- /dev/null +++ b/arch/arm/plat-s3c/dev-audio.c @@ -0,0 +1,52 @@ +/* linux/arch/arm/plat-s3c/dev-audio.c + * + * Copyright 2009 Wolfson Microelectronics + * Mark Brown <broonie@opensource.wolfsonmicro.com> + * + + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/platform_device.h> + +#include <mach/irqs.h> +#include <mach/map.h> + +#include <plat/devs.h> + + +static struct resource s3c64xx_iis0_resource[] = { + [0] = { + .start = S3C64XX_PA_IIS0, + .end = S3C64XX_PA_IIS0 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device s3c64xx_device_iis0 = { + .name = "s3c64xx-iis", + .id = 0, + .num_resources = ARRAY_SIZE(s3c64xx_iis0_resource), + .resource = s3c64xx_iis0_resource, +}; +EXPORT_SYMBOL(s3c64xx_device_iis0); + +static struct resource s3c64xx_iis1_resource[] = { + [0] = { + .start = S3C64XX_PA_IIS1, + .end = S3C64XX_PA_IIS1 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device s3c64xx_device_iis1 = { + .name = "s3c64xx-iis", + .id = 1, + .num_resources = ARRAY_SIZE(s3c64xx_iis1_resource), + .resource = s3c64xx_iis1_resource, +}; +EXPORT_SYMBOL(s3c64xx_device_iis1); diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h index a0b6768..91de11b 100644 --- a/arch/arm/plat-s3c/include/plat/devs.h +++ b/arch/arm/plat-s3c/include/plat/devs.h @@ -24,13 +24,15 @@ extern struct platform_device *s3c24xx_uart_src[]; extern struct platform_device s3c_device_timer[]; +extern struct platform_device s3c64xx_device_iis0; +extern struct platform_device s3c64xx_device_iis1; + extern struct platform_device s3c_device_fb; extern struct platform_device s3c_device_usb; extern struct platform_device s3c_device_lcd; extern struct platform_device s3c_device_wdt; extern struct platform_device s3c_device_i2c0; extern struct platform_device s3c_device_i2c1; -extern struct platform_device s3c_device_iis; extern struct platform_device s3c_device_rtc; extern struct platform_device s3c_device_adc; extern struct platform_device s3c_device_sdi; -- cgit v1.1 From d06a49eec97718949acfdc26110701d28b1872c0 Mon Sep 17 00:00:00 2001 From: Mark Brown <broonie@opensource.wolfsonmicro.com> Date: Wed, 3 Jun 2009 20:08:39 +0100 Subject: [ARM] S3C64XX: Add device for IISv4 port Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> --- arch/arm/plat-s3c/dev-audio.c | 16 ++++++++++++++++ arch/arm/plat-s3c/include/plat/devs.h | 1 + 2 files changed, 17 insertions(+) (limited to 'arch') diff --git a/arch/arm/plat-s3c/dev-audio.c b/arch/arm/plat-s3c/dev-audio.c index ccdd815..1322beb 100644 --- a/arch/arm/plat-s3c/dev-audio.c +++ b/arch/arm/plat-s3c/dev-audio.c @@ -50,3 +50,19 @@ struct platform_device s3c64xx_device_iis1 = { .resource = s3c64xx_iis1_resource, }; EXPORT_SYMBOL(s3c64xx_device_iis1); + +static struct resource s3c64xx_iisv4_resource[] = { + [0] = { + .start = S3C64XX_PA_IISV4, + .end = S3C64XX_PA_IISV4 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device s3c64xx_device_iisv4 = { + .name = "s3c64xx-iis-v4", + .id = -1, + .num_resources = ARRAY_SIZE(s3c64xx_iisv4_resource), + .resource = s3c64xx_iisv4_resource, +}; +EXPORT_SYMBOL(s3c64xx_device_iisv4); diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h index 91de11b..b5b9c4d 100644 --- a/arch/arm/plat-s3c/include/plat/devs.h +++ b/arch/arm/plat-s3c/include/plat/devs.h @@ -26,6 +26,7 @@ extern struct platform_device s3c_device_timer[]; extern struct platform_device s3c64xx_device_iis0; extern struct platform_device s3c64xx_device_iis1; +extern struct platform_device s3c64xx_device_iisv4; extern struct platform_device s3c_device_fb; extern struct platform_device s3c_device_usb; -- cgit v1.1 From b3748ddd80569ec753f62e709629b8c639143222 Mon Sep 17 00:00:00 2001 From: Mark Brown <broonie@opensource.wolfsonmicro.com> Date: Mon, 15 Jun 2009 11:23:20 +0100 Subject: [ARM] S3C64XX: Initial support for DVFS This patch provides initial support for CPU frequency scaling on the Samsung S3C ARM processors. Currently only S3C6410 processors are supported, though addition of another data table with supported clock rates should be sufficient to enable support for further CPUs. Use the regulator framework to provide optional support for DVFS in the S3C cpufreq driver. When a software controllable regulator is configured the driver will use it to lower the supply voltage when running at a lower frequency, giving improved power savings. When regulator support is disabled or no regulator can be obtained for VDDARM the driver will fall back to scaling only the frequency. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> --- arch/arm/Kconfig | 6 +- arch/arm/plat-s3c64xx/Makefile | 1 + arch/arm/plat-s3c64xx/cpufreq.c | 262 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 268 insertions(+), 1 deletion(-) create mode 100644 arch/arm/plat-s3c64xx/cpufreq.c (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 2947510..aef63c8 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1241,7 +1241,7 @@ endmenu menu "CPU Power Management" -if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_PXA) +if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_PXA || ARCH_S3C64XX) source "drivers/cpufreq/Kconfig" @@ -1272,6 +1272,10 @@ config CPU_FREQ_PXA default y select CPU_FREQ_DEFAULT_GOV_USERSPACE +config CPU_FREQ_S3C64XX + bool "CPUfreq support for Samsung S3C64XX CPUs" + depends on CPU_FREQ && CPU_S3C6410 + endif source "drivers/cpuidle/Kconfig" diff --git a/arch/arm/plat-s3c64xx/Makefile b/arch/arm/plat-s3c64xx/Makefile index 2ed5df3..3c8882c 100644 --- a/arch/arm/plat-s3c64xx/Makefile +++ b/arch/arm/plat-s3c64xx/Makefile @@ -23,6 +23,7 @@ obj-y += gpiolib.o obj-$(CONFIG_CPU_S3C6400_INIT) += s3c6400-init.o obj-$(CONFIG_CPU_S3C6400_CLOCK) += s3c6400-clock.o +obj-$(CONFIG_CPU_FREQ_S3C64XX) += cpufreq.o # PM support diff --git a/arch/arm/plat-s3c64xx/cpufreq.c b/arch/arm/plat-s3c64xx/cpufreq.c new file mode 100644 index 0000000..e6e0843 --- /dev/null +++ b/arch/arm/plat-s3c64xx/cpufreq.c @@ -0,0 +1,262 @@ +/* linux/arch/arm/plat-s3c64xx/cpufreq.c + * + * Copyright 2009 Wolfson Microelectronics plc + * + * S3C64xx CPUfreq Support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/cpufreq.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/regulator/consumer.h> + +static struct clk *armclk; +static struct regulator *vddarm; + +#ifdef CONFIG_CPU_S3C6410 +struct s3c64xx_dvfs { + unsigned int vddarm_min; + unsigned int vddarm_max; +}; + +static struct s3c64xx_dvfs s3c64xx_dvfs_table[] = { + [0] = { 1000000, 1000000 }, + [1] = { 1000000, 1050000 }, + [2] = { 1050000, 1100000 }, + [3] = { 1050000, 1150000 }, + [4] = { 1250000, 1350000 }, +}; + +static struct cpufreq_frequency_table s3c64xx_freq_table[] = { + { 0, 66000 }, + { 0, 133000 }, + { 1, 222000 }, + { 1, 266000 }, + { 2, 333000 }, + { 2, 400000 }, + { 3, 532000 }, + { 3, 533000 }, + { 4, 667000 }, + { 0, CPUFREQ_TABLE_END }, +}; +#endif + +static int s3c64xx_cpufreq_verify_speed(struct cpufreq_policy *policy) +{ + if (policy->cpu != 0) + return -EINVAL; + + return cpufreq_frequency_table_verify(policy, s3c64xx_freq_table); +} + +static unsigned int s3c64xx_cpufreq_get_speed(unsigned int cpu) +{ + if (cpu != 0) + return 0; + + return clk_get_rate(armclk) / 1000; +} + +static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + int ret; + unsigned int i; + struct cpufreq_freqs freqs; + struct s3c64xx_dvfs *dvfs; + + ret = cpufreq_frequency_table_target(policy, s3c64xx_freq_table, + target_freq, relation, &i); + if (ret != 0) + return ret; + + freqs.cpu = 0; + freqs.old = clk_get_rate(armclk) / 1000; + freqs.new = s3c64xx_freq_table[i].frequency; + freqs.flags = 0; + dvfs = &s3c64xx_dvfs_table[s3c64xx_freq_table[i].index]; + + if (freqs.old == freqs.new) + return 0; + + pr_debug("cpufreq: Transition %d-%dkHz\n", freqs.old, freqs.new); + + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + +#ifdef CONFIG_REGULATOR + if (vddarm && freqs.new > freqs.old) { + ret = regulator_set_voltage(vddarm, + dvfs->vddarm_min, + dvfs->vddarm_max); + if (ret != 0) { + pr_err("cpufreq: Failed to set VDDARM for %dkHz: %d\n", + freqs.new, ret); + goto err; + } + } +#endif + + ret = clk_set_rate(armclk, freqs.new * 1000); + if (ret < 0) { + pr_err("cpufreq: Failed to set rate %dkHz: %d\n", + freqs.new, ret); + goto err; + } + +#ifdef CONFIG_REGULATOR + if (vddarm && freqs.new < freqs.old) { + ret = regulator_set_voltage(vddarm, + dvfs->vddarm_min, + dvfs->vddarm_max); + if (ret != 0) { + pr_err("cpufreq: Failed to set VDDARM for %dkHz: %d\n", + freqs.new, ret); + goto err_clk; + } + } +#endif + + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + + pr_debug("cpufreq: Set actual frequency %lukHz\n", + clk_get_rate(armclk) / 1000); + + return 0; + +err_clk: + if (clk_set_rate(armclk, freqs.old * 1000) < 0) + pr_err("Failed to restore original clock rate\n"); +err: + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + + return ret; +} + +#ifdef CONFIG_REGULATOR +static void __init s3c64xx_cpufreq_constrain_voltages(void) +{ + int count, v, i, found; + struct cpufreq_frequency_table *freq; + struct s3c64xx_dvfs *dvfs; + + count = regulator_count_voltages(vddarm); + if (count < 0) { + pr_err("cpufreq: Unable to check supported voltages\n"); + return; + } + + freq = s3c64xx_freq_table; + while (freq->frequency != CPUFREQ_TABLE_END) { + if (freq->frequency == CPUFREQ_ENTRY_INVALID) + continue; + + dvfs = &s3c64xx_dvfs_table[freq->index]; + found = 0; + + for (i = 0; i < count; i++) { + v = regulator_list_voltage(vddarm, i); + if (v >= dvfs->vddarm_min && v <= dvfs->vddarm_max) + found = 1; + } + + if (!found) { + pr_debug("cpufreq: %dkHz unsupported by regulator\n", + freq->frequency); + freq->frequency = CPUFREQ_ENTRY_INVALID; + } + + freq++; + } +} +#endif + +static int __init s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy) +{ + int ret; + struct cpufreq_frequency_table *freq; + + if (policy->cpu != 0) + return -EINVAL; + + if (s3c64xx_freq_table == NULL) { + pr_err("cpufreq: No frequency information for this CPU\n"); + return -ENODEV; + } + + armclk = clk_get(NULL, "armclk"); + if (IS_ERR(armclk)) { + pr_err("cpufreq: Unable to obtain ARMCLK: %ld\n", + PTR_ERR(armclk)); + return PTR_ERR(armclk); + } + +#ifdef CONFIG_REGULATOR + vddarm = regulator_get(NULL, "vddarm"); + if (IS_ERR(vddarm)) { + ret = PTR_ERR(vddarm); + pr_err("cpufreq: Failed to obtain VDDARM: %d\n", ret); + pr_err("cpufreq: Only frequency scaling available\n"); + vddarm = NULL; + } else { + s3c64xx_cpufreq_constrain_voltages(); + } +#endif + + freq = s3c64xx_freq_table; + while (freq->frequency != CPUFREQ_TABLE_END) { + unsigned long r; + + /* Check for frequencies we can generate */ + r = clk_round_rate(armclk, freq->frequency * 1000); + r /= 1000; + if (r != freq->frequency) + freq->frequency = CPUFREQ_ENTRY_INVALID; + + /* If we have no regulator then assume startup + * frequency is the maximum we can support. */ + if (!vddarm && freq->frequency > s3c64xx_cpufreq_get_speed(0)) + freq->frequency = CPUFREQ_ENTRY_INVALID; + + freq++; + } + + policy->cur = clk_get_rate(armclk) / 1000; + + /* Pick a conservative guess in ns: we'll need ~1 I2C/SPI + * write plus clock reprogramming. */ + policy->cpuinfo.transition_latency = 2 * 1000 * 1000; + + ret = cpufreq_frequency_table_cpuinfo(policy, s3c64xx_freq_table); + if (ret != 0) { + pr_err("cpufreq: Failed to configure frequency table: %d\n", + ret); + regulator_put(vddarm); + clk_put(armclk); + } + + return ret; +} + +static struct cpufreq_driver s3c64xx_cpufreq_driver = { + .owner = THIS_MODULE, + .flags = 0, + .verify = s3c64xx_cpufreq_verify_speed, + .target = s3c64xx_cpufreq_set_target, + .get = s3c64xx_cpufreq_get_speed, + .init = s3c64xx_cpufreq_driver_init, + .name = "s3c", +}; + +static int __init s3c64xx_cpufreq_init(void) +{ + return cpufreq_register_driver(&s3c64xx_cpufreq_driver); +} +module_init(s3c64xx_cpufreq_init); -- cgit v1.1 From 9d76295ac6082449a64fd6fa981d2615a34e243d Mon Sep 17 00:00:00 2001 From: Andy Green <andy@warmcat.com> Date: Tue, 19 May 2009 06:41:42 -0300 Subject: [ARM] GTA02/FreeRunner: Add machine definition This patch introduces the Openmoko GTA02 machine definition. Much of the code is based on Harald Welte's work, although it has been largely rewritten several times. This is intended to be the minimum machine definition to boot and be able to run a rootfs from NAND on GTA02 / FreeRunner. It does not bring up the framebuffer / Glamo and lacks many other peripheral drivers from outside the SoC. But once we have this basis in mainline kernel, we will be able to introduce the other drivers and add them here. Thanks to Sven Rebhan <odinshorse@googlemail.com> for his fixes to this patch (Kconfig and defconfig files). Signed-off-by: Andy Green <andy@warmcat.com> Signed-off-by: Nelson Castillo <arhuaco@freaks-unidos.net> [ben-linux@fluff.org: Fix the GPIO definitions] Signed-off-by: Ben Dooks <ben-linux@fluff.org> --- arch/arm/mach-s3c2442/Kconfig | 12 + arch/arm/mach-s3c2442/Makefile | 2 + arch/arm/mach-s3c2442/include/mach/gta02.h | 84 ++++ arch/arm/mach-s3c2442/mach-gta02.c | 646 +++++++++++++++++++++++++++++ 4 files changed, 744 insertions(+) create mode 100644 arch/arm/mach-s3c2442/include/mach/gta02.h create mode 100644 arch/arm/mach-s3c2442/mach-gta02.c (limited to 'arch') diff --git a/arch/arm/mach-s3c2442/Kconfig b/arch/arm/mach-s3c2442/Kconfig index b289d19..103e913 100644 --- a/arch/arm/mach-s3c2442/Kconfig +++ b/arch/arm/mach-s3c2442/Kconfig @@ -24,6 +24,18 @@ config SMDK2440_CPU2442 depends on ARCH_S3C2440 select CPU_S3C2442 +config MACH_NEO1973_GTA02 + bool "Openmoko GTA02 / Freerunner phone" + select CPU_S3C2442 + select MFD_PCF50633 + select PCF50633_GPIO + select I2C + select POWER_SUPPLY + select MACH_NEO1973 + select S3C2410_PWM + help + Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone + endmenu diff --git a/arch/arm/mach-s3c2442/Makefile b/arch/arm/mach-s3c2442/Makefile index 2a909c6..2a19113 100644 --- a/arch/arm/mach-s3c2442/Makefile +++ b/arch/arm/mach-s3c2442/Makefile @@ -12,5 +12,7 @@ obj- := obj-$(CONFIG_CPU_S3C2442) += s3c2442.o obj-$(CONFIG_CPU_S3C2442) += clock.o +obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o + # Machine support diff --git a/arch/arm/mach-s3c2442/include/mach/gta02.h b/arch/arm/mach-s3c2442/include/mach/gta02.h new file mode 100644 index 0000000..953331d --- /dev/null +++ b/arch/arm/mach-s3c2442/include/mach/gta02.h @@ -0,0 +1,84 @@ +#ifndef _GTA02_H +#define _GTA02_H + +#include <mach/regs-gpio.h> + +/* Different hardware revisions, passed in ATAG_REVISION by u-boot */ +#define GTA02v1_SYSTEM_REV 0x00000310 +#define GTA02v2_SYSTEM_REV 0x00000320 +#define GTA02v3_SYSTEM_REV 0x00000330 +#define GTA02v4_SYSTEM_REV 0x00000340 +#define GTA02v5_SYSTEM_REV 0x00000350 +/* since A7 is basically same as A6, we use A6 PCB ID */ +#define GTA02v6_SYSTEM_REV 0x00000360 + +#define GTA02_GPIO_n3DL_GSM S3C2410_GPA(13) /* v1 + v2 + v3 only */ + +#define GTA02_GPIO_PWR_LED1 S3C2410_GPB(0) +#define GTA02_GPIO_PWR_LED2 S3C2410_GPB(1) +#define GTA02_GPIO_AUX_LED S3C2410_GPB(2) +#define GTA02_GPIO_VIBRATOR_ON S3C2410_GPB(3) +#define GTA02_GPIO_MODEM_RST S3C2410_GPB(5) +#define GTA02_GPIO_BT_EN S3C2410_GPB(6) +#define GTA02_GPIO_MODEM_ON S3C2410_GPB(7) +#define GTA02_GPIO_EXTINT8 S3C2410_GPB(8) +#define GTA02_GPIO_USB_PULLUP S3C2410_GPB(9) + +#define GTA02_GPIO_PIO5 S3C2410_GPC(5) /* v3 + v4 only */ + +#define GTA02v3_GPIO_nG1_CS S3C2410_GPD(12) /* v3 + v4 only */ +#define GTA02v3_GPIO_nG2_CS S3C2410_GPD(13) /* v3 + v4 only */ +#define GTA02v5_GPIO_HDQ S3C2410_GPD(14) /* v5 + */ + +#define GTA02_GPIO_nG1_INT S3C2410_GPF(0) +#define GTA02_GPIO_IO1 S3C2410_GPF(1) +#define GTA02_GPIO_PIO_2 S3C2410_GPF(2) /* v2 + v3 + v4 only */ +#define GTA02_GPIO_JACK_INSERT S3C2410_GPF(4) +#define GTA02_GPIO_WLAN_GPIO1 S3C2410_GPF(5) /* v2 + v3 + v4 only */ +#define GTA02_GPIO_AUX_KEY S3C2410_GPF(6) +#define GTA02_GPIO_HOLD_KEY S3C2410_GPF(7) + +#define GTA02_GPIO_3D_IRQ S3C2410_GPG(4) +#define GTA02v2_GPIO_nG2_INT S3C2410_GPG(8) /* v2 + v3 + v4 only */ +#define GTA02v3_GPIO_nUSB_OC S3C2410_GPG(9) /* v3 + v4 only */ +#define GTA02v3_GPIO_nUSB_FLT S3C2410_GPG(10) /* v3 + v4 only */ +#define GTA02v3_GPIO_nGSM_OC S3C2410_GPG(11) /* v3 + v4 only */ + +#define GTA02_GPIO_AMP_SHUT S3C2440_GPJ1 /* v2 + v3 + v4 only */ +#define GTA02v1_GPIO_WLAN_GPIO10 S3C2440_GPJ2 +#define GTA02_GPIO_HP_IN S3C2440_GPJ2 /* v2 + v3 + v4 only */ +#define GTA02_GPIO_INT0 S3C2440_GPJ3 /* v2 + v3 + v4 only */ +#define GTA02_GPIO_nGSM_EN S3C2440_GPJ4 +#define GTA02_GPIO_3D_RESET S3C2440_GPJ5 +#define GTA02_GPIO_nDL_GSM S3C2440_GPJ6 /* v4 + v5 only */ +#define GTA02_GPIO_WLAN_GPIO0 S3C2440_GPJ7 +#define GTA02v1_GPIO_BAT_ID S3C2440_GPJ8 +#define GTA02_GPIO_KEEPACT S3C2440_GPJ8 +#define GTA02v1_GPIO_HP_IN S3C2440_GPJ10 +#define GTA02_CHIP_PWD S3C2440_GPJ11 /* v2 + v3 + v4 only */ +#define GTA02_GPIO_nWLAN_RESET S3C2440_GPJ12 /* v2 + v3 + v4 only */ + +#define GTA02_IRQ_GSENSOR_1 IRQ_EINT0 +#define GTA02_IRQ_MODEM IRQ_EINT1 +#define GTA02_IRQ_PIO_2 IRQ_EINT2 /* v2 + v3 + v4 only */ +#define GTA02_IRQ_nJACK_INSERT IRQ_EINT4 +#define GTA02_IRQ_WLAN_GPIO1 IRQ_EINT5 +#define GTA02_IRQ_AUX IRQ_EINT6 +#define GTA02_IRQ_nHOLD IRQ_EINT7 +#define GTA02_IRQ_PCF50633 IRQ_EINT9 +#define GTA02_IRQ_3D IRQ_EINT12 +#define GTA02_IRQ_GSENSOR_2 IRQ_EINT16 /* v2 + v3 + v4 only */ +#define GTA02v3_IRQ_nUSB_OC IRQ_EINT17 /* v3 + v4 only */ +#define GTA02v3_IRQ_nUSB_FLT IRQ_EINT18 /* v3 + v4 only */ +#define GTA02v3_IRQ_nGSM_OC IRQ_EINT19 /* v3 + v4 only */ + +/* returns 00 000 on GTA02 A5 and earlier, A6 returns 01 001 */ +#define GTA02_PCB_ID1_0 S3C2410_GPC(13) +#define GTA02_PCB_ID1_1 S3C2410_GPC(15) +#define GTA02_PCB_ID1_2 S3C2410_GPD(0) +#define GTA02_PCB_ID2_0 S3C2410_GPD(3) +#define GTA02_PCB_ID2_1 S3C2410_GPD(4) + +int gta02_get_pcb_revision(void); + +#endif /* _GTA02_H */ diff --git a/arch/arm/mach-s3c2442/mach-gta02.c b/arch/arm/mach-s3c2442/mach-gta02.c new file mode 100644 index 0000000..e23b581 --- /dev/null +++ b/arch/arm/mach-s3c2442/mach-gta02.c @@ -0,0 +1,646 @@ +/* + * linux/arch/arm/mach-s3c2442/mach-gta02.c + * + * S3C2442 Machine Support for Openmoko GTA02 / FreeRunner. + * + * Copyright (C) 2006-2009 by Openmoko, Inc. + * Authors: Harald Welte <laforge@openmoko.org> + * Andy Green <andy@openmoko.org> + * Werner Almesberger <werner@openmoko.org> + * All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/delay.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/gpio.h> +#include <linux/workqueue.h> +#include <linux/platform_device.h> +#include <linux/serial_core.h> +#include <linux/spi/spi.h> + +#include <linux/mmc/host.h> + +#include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/nand_ecc.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/io.h> + +#include <linux/i2c.h> +#include <linux/backlight.h> +#include <linux/regulator/machine.h> + +#include <linux/mfd/pcf50633/core.h> +#include <linux/mfd/pcf50633/mbc.h> +#include <linux/mfd/pcf50633/adc.h> +#include <linux/mfd/pcf50633/gpio.h> +#include <linux/mfd/pcf50633/pmic.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <asm/irq.h> +#include <asm/mach-types.h> + +#include <mach/regs-irq.h> +#include <mach/regs-gpio.h> +#include <mach/regs-gpioj.h> +#include <mach/fb.h> + +#include <mach/spi.h> +#include <mach/spi-gpio.h> +#include <plat/usb-control.h> +#include <mach/regs-mem.h> +#include <mach/hardware.h> + +#include <mach/gta02.h> + +#include <plat/regs-serial.h> +#include <plat/nand.h> +#include <plat/devs.h> +#include <plat/cpu.h> +#include <plat/pm.h> +#include <plat/udc.h> +#include <plat/gpio-cfg.h> +#include <plat/iic.h> + +static struct pcf50633 *gta02_pcf; + +/* + * This gets called every 1ms when we paniced. + */ + +static long gta02_panic_blink(long count) +{ + long delay = 0; + static long last_blink; + static char led; + + /* Fast blink: 200ms period. */ + if (count - last_blink < 100) + return 0; + + led ^= 1; + gpio_direction_output(GTA02_GPIO_AUX_LED, led); + + last_blink = count; + + return delay; +} + + +static struct map_desc gta02_iodesc[] __initdata = { + { + .virtual = 0xe0000000, + .pfn = __phys_to_pfn(S3C2410_CS3 + 0x01000000), + .length = SZ_1M, + .type = MT_DEVICE + }, +}; + +#define UCON (S3C2410_UCON_DEFAULT | S3C2443_UCON_RXERR_IRQEN) +#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB) +#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE) + +static struct s3c2410_uartcfg gta02_uartcfgs[] = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, +}; + +#ifdef CONFIG_CHARGER_PCF50633 +/* + * On GTA02 the 1A charger features a 48K resistor to 0V on the ID pin. + * We use this to recognize that we can pull 1A from the USB socket. + * + * These constants are the measured pcf50633 ADC levels with the 1A + * charger / 48K resistor, and with no pulldown resistor. + */ + +#define ADC_NOM_CHG_DETECT_1A 6 +#define ADC_NOM_CHG_DETECT_USB 43 + +static void +gta02_configure_pmu_for_charger(struct pcf50633 *pcf, void *unused, int res) +{ + int ma; + + /* Interpret charger type */ + if (res < ((ADC_NOM_CHG_DETECT_USB + ADC_NOM_CHG_DETECT_1A) / 2)) { + + /* + * Sanity - stop GPO driving out now that we have a 1A charger + * GPO controls USB Host power generation on GTA02 + */ + pcf50633_gpio_set(pcf, PCF50633_GPO, 0); + + ma = 1000; + } else + ma = 100; + + pcf50633_mbc_usb_curlim_set(pcf, ma); +} + +static struct delayed_work gta02_charger_work; +static int gta02_usb_vbus_draw; + +static void gta02_charger_worker(struct work_struct *work) +{ + if (gta02_usb_vbus_draw) { + pcf50633_mbc_usb_curlim_set(gta02_pcf, gta02_usb_vbus_draw); + return; + } + +#ifdef CONFIG_PCF50633_ADC + pcf50633_adc_async_read(gta02_pcf, + PCF50633_ADCC1_MUX_ADCIN1, + PCF50633_ADCC1_AVERAGE_16, + gta02_configure_pmu_for_charger, + NULL); +#else + /* + * If the PCF50633 ADC is disabled we fallback to a + * 100mA limit for safety. + */ + pcf50633_mbc_usb_curlim_set(pcf, 100); +#endif +} + +#define GTA02_CHARGER_CONFIGURE_TIMEOUT ((3000 * HZ) / 1000) + +static void gta02_pmu_event_callback(struct pcf50633 *pcf, int irq) +{ + if (irq == PCF50633_IRQ_USBINS) { + schedule_delayed_work(>a02_charger_work, + GTA02_CHARGER_CONFIGURE_TIMEOUT); + + return; + } + + if (irq == PCF50633_IRQ_USBREM) { + cancel_delayed_work_sync(>a02_charger_work); + gta02_usb_vbus_draw = 0; + } +} + +static void gta02_udc_vbus_draw(unsigned int ma) +{ + if (!gta02_pcf) + return; + + gta02_usb_vbus_draw = ma; + + schedule_delayed_work(>a02_charger_work, + GTA02_CHARGER_CONFIGURE_TIMEOUT); +} +#else /* !CONFIG_CHARGER_PCF50633 */ +#define gta02_pmu_event_callback NULL +#define gta02_udc_vbus_draw NULL +#endif + +/* + * This is called when pc50633 is probed, unfortunately quite late in the + * day since it is an I2C bus device. Here we can belatedly define some + * platform devices with the advantage that we can mark the pcf50633 as the + * parent. This makes them get suspended and resumed with their parent + * the pcf50633 still around. + */ + +static void gta02_pmu_attach_child_devices(struct pcf50633 *pcf); + + +static char *gta02_batteries[] = { + "battery", +}; + +struct pcf50633_platform_data gta02_pcf_pdata = { + .resumers = { + [0] = PCF50633_INT1_USBINS | + PCF50633_INT1_USBREM | + PCF50633_INT1_ALARM, + [1] = PCF50633_INT2_ONKEYF, + [2] = PCF50633_INT3_ONKEY1S, + [3] = PCF50633_INT4_LOWSYS | + PCF50633_INT4_LOWBAT | + PCF50633_INT4_HIGHTMP, + }, + + .batteries = gta02_batteries, + .num_batteries = ARRAY_SIZE(gta02_batteries), + .reg_init_data = { + [PCF50633_REGULATOR_AUTO] = { + .constraints = { + .min_uV = 3300000, + .max_uV = 3300000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .always_on = 1, + .apply_uV = 1, + .state_mem = { + .enabled = 1, + }, + }, + }, + [PCF50633_REGULATOR_DOWN1] = { + .constraints = { + .min_uV = 1300000, + .max_uV = 1600000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .always_on = 1, + .apply_uV = 1, + }, + }, + [PCF50633_REGULATOR_DOWN2] = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .apply_uV = 1, + .always_on = 1, + .state_mem = { + .enabled = 1, + }, + }, + }, + [PCF50633_REGULATOR_HCLDO] = { + .constraints = { + .min_uV = 2000000, + .max_uV = 3300000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .always_on = 1, + }, + }, + [PCF50633_REGULATOR_LDO1] = { + .constraints = { + .min_uV = 3300000, + .max_uV = 3300000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .apply_uV = 1, + .state_mem = { + .enabled = 0, + }, + }, + }, + [PCF50633_REGULATOR_LDO2] = { + .constraints = { + .min_uV = 3300000, + .max_uV = 3300000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .apply_uV = 1, + }, + }, + [PCF50633_REGULATOR_LDO3] = { + .constraints = { + .min_uV = 3000000, + .max_uV = 3000000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .apply_uV = 1, + }, + }, + [PCF50633_REGULATOR_LDO4] = { + .constraints = { + .min_uV = 3200000, + .max_uV = 3200000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .apply_uV = 1, + }, + }, + [PCF50633_REGULATOR_LDO5] = { + .constraints = { + .min_uV = 3000000, + .max_uV = 3000000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .apply_uV = 1, + .state_mem = { + .enabled = 1, + }, + }, + }, + [PCF50633_REGULATOR_LDO6] = { + .constraints = { + .min_uV = 3000000, + .max_uV = 3000000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + }, + }, + [PCF50633_REGULATOR_MEMLDO] = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .state_mem = { + .enabled = 1, + }, + }, + }, + + }, + .probe_done = gta02_pmu_attach_child_devices, + .mbc_event_callback = gta02_pmu_event_callback, +}; + + +/* NOR Flash. */ + +#define GTA02_FLASH_BASE 0x18000000 /* GCS3 */ +#define GTA02_FLASH_SIZE 0x200000 /* 2MBytes */ + +static struct physmap_flash_data gta02_nor_flash_data = { + .width = 2, +}; + +static struct resource gta02_nor_flash_resource = { + .start = GTA02_FLASH_BASE, + .end = GTA02_FLASH_BASE + GTA02_FLASH_SIZE - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device gta02_nor_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = >a02_nor_flash_data, + }, + .resource = >a02_nor_flash_resource, + .num_resources = 1, +}; + + +struct platform_device s3c24xx_pwm_device = { + .name = "s3c24xx_pwm", + .num_resources = 0, +}; + +static struct i2c_board_info gta02_i2c_devs[] __initdata = { + { + I2C_BOARD_INFO("pcf50633", 0x73), + .irq = GTA02_IRQ_PCF50633, + .platform_data = >a02_pcf_pdata, + }, + { + I2C_BOARD_INFO("wm8753", 0x1a), + }, +}; + +static struct s3c2410_nand_set gta02_nand_sets[] = { + [0] = { + /* + * This name is also hard-coded in the boot loaders, so + * changing it would would require all users to upgrade + * their boot loaders, some of which are stored in a NOR + * that is considered to be immutable. + */ + .name = "neo1973-nand", + .nr_chips = 1, + .use_bbt = 1, + .force_soft_ecc = 1, + }, +}; + +/* + * Choose a set of timings derived from S3C@2442B MCP54 + * data sheet (K5D2G13ACM-D075 MCP Memory). + */ + +static struct s3c2410_platform_nand gta02_nand_info = { + .tacls = 0, + .twrph0 = 25, + .twrph1 = 15, + .nr_sets = ARRAY_SIZE(gta02_nand_sets), + .sets = gta02_nand_sets, +}; + + +static void gta02_udc_command(enum s3c2410_udc_cmd_e cmd) +{ + switch (cmd) { + case S3C2410_UDC_P_ENABLE: + pr_debug("%s S3C2410_UDC_P_ENABLE\n", __func__); + gpio_direction_output(GTA02_GPIO_USB_PULLUP, 1); + break; + case S3C2410_UDC_P_DISABLE: + pr_debug("%s S3C2410_UDC_P_DISABLE\n", __func__); + gpio_direction_output(GTA02_GPIO_USB_PULLUP, 0); + break; + case S3C2410_UDC_P_RESET: + pr_debug("%s S3C2410_UDC_P_RESET\n", __func__); + /* FIXME: Do something here. */ + } +} + +/* Get PMU to set USB current limit accordingly. */ +static struct s3c2410_udc_mach_info gta02_udc_cfg = { + .vbus_draw = gta02_udc_vbus_draw, + .udc_command = gta02_udc_command, + +}; + + + +static void gta02_bl_set_intensity(int intensity) +{ + struct pcf50633 *pcf = gta02_pcf; + int old_intensity = pcf50633_reg_read(pcf, PCF50633_REG_LEDOUT); + + /* We map 8-bit intensity to 6-bit intensity in hardware. */ + intensity >>= 2; + + /* + * This can happen during, eg, print of panic on blanked console, + * but we can't service i2c without interrupts active, so abort. + */ + if (in_atomic()) { + printk(KERN_ERR "gta02_bl_set_intensity called while atomic\n"); + return; + } + + old_intensity = pcf50633_reg_read(pcf, PCF50633_REG_LEDOUT); + if (intensity == old_intensity) + return; + + /* We can't do this anywhere else. */ + pcf50633_reg_write(pcf, PCF50633_REG_LEDDIM, 5); + + if (!(pcf50633_reg_read(pcf, PCF50633_REG_LEDENA) & 3)) + old_intensity = 0; + + /* + * The PCF50633 cannot handle LEDOUT = 0 (datasheet p60) + * if seen, you have to re-enable the LED unit. + */ + if (!intensity || !old_intensity) + pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 0); + + /* Illegal to set LEDOUT to 0. */ + if (!intensity) + pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_LEDOUT, 0x3f, 2); + else + pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_LEDOUT, 0x3f, + intensity); + + if (intensity) + pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 2); + +} + +static struct generic_bl_info gta02_bl_info = { + .name = "gta02-bl", + .max_intensity = 0xff, + .default_intensity = 0xff, + .set_bl_intensity = gta02_bl_set_intensity, +}; + +static struct platform_device gta02_bl_dev = { + .name = "generic-bl", + .id = 1, + .dev = { + .platform_data = >a02_bl_info, + }, +}; + + + +/* USB */ +static struct s3c2410_hcd_info gta02_usb_info = { + .port[0] = { + .flags = S3C_HCDFLG_USED, + }, + .port[1] = { + .flags = 0, + }, +}; + + +static void __init gta02_map_io(void) +{ + s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc)); + s3c24xx_init_clocks(12000000); + s3c24xx_init_uarts(gta02_uartcfgs, ARRAY_SIZE(gta02_uartcfgs)); +} + + +/* These are the guys that don't need to be children of PMU. */ + +static struct platform_device *gta02_devices[] __initdata = { + &s3c_device_usb, + &s3c_device_wdt, + &s3c_device_sdi, + &s3c_device_usbgadget, + &s3c_device_nand, + >a02_nor_flash, + &s3c24xx_pwm_device, + &s3c_device_iis, + &s3c_device_i2c0, +}; + +/* These guys DO need to be children of PMU. */ + +static struct platform_device *gta02_devices_pmu_children[] = { + >a02_bl_dev, +}; + + +/* + * This is called when pc50633 is probed, quite late in the day since it is an + * I2C bus device. Here we can define platform devices with the advantage that + * we can mark the pcf50633 as the parent. This makes them get suspended and + * resumed with their parent the pcf50633 still around. All devices whose + * operation depends on something from pcf50633 must have this relationship + * made explicit like this, or suspend and resume will become an unreliable + * hellworld. + */ + +static void gta02_pmu_attach_child_devices(struct pcf50633 *pcf) +{ + int n; + + /* Grab a copy of the now probed PMU pointer. */ + gta02_pcf = pcf; + + for (n = 0; n < ARRAY_SIZE(gta02_devices_pmu_children); n++) + gta02_devices_pmu_children[n]->dev.parent = pcf->dev; + + platform_add_devices(gta02_devices_pmu_children, + ARRAY_SIZE(gta02_devices_pmu_children)); +} + +static void gta02_poweroff(void) +{ + pcf50633_reg_set_bit_mask(gta02_pcf, PCF50633_REG_OOCSHDWN, 1, 1); +} + +static void __init gta02_machine_init(void) +{ + /* Set the panic callback to make AUX LED blink at ~5Hz. */ + panic_blink = gta02_panic_blink; + + s3c_pm_init(); + +#ifdef CONFIG_CHARGER_PCF50633 + INIT_DELAYED_WORK(>a02_charger_work, gta02_charger_worker); +#endif + + s3c_device_usb.dev.platform_data = >a02_usb_info; + s3c_device_nand.dev.platform_data = >a02_nand_info; + + s3c24xx_udc_set_platdata(>a02_udc_cfg); + s3c_i2c0_set_platdata(NULL); + + i2c_register_board_info(0, gta02_i2c_devs, ARRAY_SIZE(gta02_i2c_devs)); + + platform_add_devices(gta02_devices, ARRAY_SIZE(gta02_devices)); + pm_power_off = gta02_poweroff; +} + + +MACHINE_START(NEO1973_GTA02, "GTA02") + /* Maintainer: Nelson Castillo <arhuaco@freaks-unidos.net> */ + .phys_io = S3C2410_PA_UART, + .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, + .boot_params = S3C2410_SDRAM_PA + 0x100, + .map_io = gta02_map_io, + .init_irq = s3c24xx_init_irq, + .init_machine = gta02_machine_init, + .timer = &s3c24xx_timer, +MACHINE_END -- cgit v1.1 From 184e1fdfea066ab8f12a1e8912f402d2d6556d11 Mon Sep 17 00:00:00 2001 From: Huang Ying <ying.huang@intel.com> Date: Mon, 15 Jun 2009 15:37:07 +0800 Subject: x86, mce: fix a race condition about mce_callin and no_way_out If one CPU has no_way_out == 1, all other CPUs should have no_way_out == 1. But despite global_nwo is read after mce_callin, global_nwo is updated after mce_callin too. So it is possible that some CPU read global_nwo before some other CPU update global_nwo, so that no_way_out == 1 for some CPU, while no_way_out == 0 for some other CPU. This patch fixes this race condition via moving mce_callin updating after global_nwo updating, with a smp_wmb in between. A smp_rmb is added between their reading too. Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Andi Kleen <ak@linux.intel.com> Acked-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> --- arch/x86/kernel/cpu/mcheck/mce.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index fabba15..19294b8 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -703,6 +703,11 @@ static int mce_start(int no_way_out, int *order) } atomic_add(no_way_out, &global_nwo); + /* + * global_nwo should be updated before mce_callin + */ + smp_wmb(); + *order = atomic_add_return(1, &mce_callin); /* * Wait for everyone. @@ -717,6 +722,10 @@ static int mce_start(int no_way_out, int *order) } /* + * mce_callin should be read before global_nwo + */ + smp_rmb(); + /* * Cache the global no_way_out state. */ nwo = atomic_read(&global_nwo); @@ -862,7 +871,7 @@ void do_machine_check(struct pt_regs *regs, long error_code) * Establish sequential order between the CPUs entering the machine * check handler. */ - int order; + int order = -1; /* * If no_way_out gets set, there is no safe way to recover from this @@ -887,7 +896,6 @@ void do_machine_check(struct pt_regs *regs, long error_code) if (!banks) goto out; - order = atomic_add_return(1, &mce_callin); mce_setup(&m); m.mcgstatus = mce_rdmsrl(MSR_IA32_MCG_STATUS); -- cgit v1.1 From 33edbf02a92771fa2a81e41084a44ba874e3a5a5 Mon Sep 17 00:00:00 2001 From: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Date: Mon, 15 Jun 2009 17:18:45 +0900 Subject: x86, mce: don't init timer if !mce_available In mce_cpu_restart, mce_init_timer is called unconditionally. If !mce_available (e.g. mce is disabled), there are no useful work for timer. Stop running it. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> --- arch/x86/kernel/cpu/mcheck/mce.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index 19294b8..dda7721 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -1617,8 +1617,9 @@ static int mce_resume(struct sys_device *dev) static void mce_cpu_restart(void *data) { del_timer_sync(&__get_cpu_var(mce_timer)); - if (mce_available(¤t_cpu_data)) - mce_init(); + if (!mce_available(¤t_cpu_data)) + return; + mce_init(); mce_init_timer(); } -- cgit v1.1 From 7fb06fc9672b947424e05871243a4c8e19ec3bce Mon Sep 17 00:00:00 2001 From: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Date: Mon, 15 Jun 2009 18:18:43 +0900 Subject: x86, mce: cleanup mce_start() Simplify interface of mce_start(): - no_way_out = mce_start(no_way_out, &order); + order = mce_start(&no_way_out); Now Monarch and Subjects share same exit(return) in usual path. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> --- arch/x86/kernel/cpu/mcheck/mce.c | 66 +++++++++++++++++++--------------------- 1 file changed, 31 insertions(+), 35 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index dda7721..739fd7e 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -691,23 +691,21 @@ static atomic_t global_nwo; * in the entry order. * TBD double check parallel CPU hotunplug */ -static int mce_start(int no_way_out, int *order) +static int mce_start(int *no_way_out) { - int nwo; + int order; int cpus = num_online_cpus(); u64 timeout = (u64)monarch_timeout * NSEC_PER_USEC; - if (!timeout) { - *order = -1; - return no_way_out; - } + if (!timeout) + return -1; - atomic_add(no_way_out, &global_nwo); + atomic_add(*no_way_out, &global_nwo); /* * global_nwo should be updated before mce_callin */ smp_wmb(); - *order = atomic_add_return(1, &mce_callin); + order = atomic_add_return(1, &mce_callin); /* * Wait for everyone. @@ -715,8 +713,7 @@ static int mce_start(int no_way_out, int *order) while (atomic_read(&mce_callin) != cpus) { if (mce_timed_out(&timeout)) { atomic_set(&global_nwo, 0); - *order = -1; - return no_way_out; + return -1; } ndelay(SPINUNIT); } @@ -725,34 +722,34 @@ static int mce_start(int no_way_out, int *order) * mce_callin should be read before global_nwo */ smp_rmb(); - /* - * Cache the global no_way_out state. - */ - nwo = atomic_read(&global_nwo); - /* - * Monarch starts executing now, the others wait. - */ - if (*order == 1) { + if (order == 1) { + /* + * Monarch: Starts executing now, the others wait. + */ atomic_set(&mce_executing, 1); - return nwo; + } else { + /* + * Subject: Now start the scanning loop one by one in + * the original callin order. + * This way when there are any shared banks it will be + * only seen by one CPU before cleared, avoiding duplicates. + */ + while (atomic_read(&mce_executing) < order) { + if (mce_timed_out(&timeout)) { + atomic_set(&global_nwo, 0); + return -1; + } + ndelay(SPINUNIT); + } } /* - * Now start the scanning loop one by one - * in the original callin order. - * This way when there are any shared banks it will - * be only seen by one CPU before cleared, avoiding duplicates. + * Cache the global no_way_out state. */ - while (atomic_read(&mce_executing) < *order) { - if (mce_timed_out(&timeout)) { - atomic_set(&global_nwo, 0); - *order = -1; - return no_way_out; - } - ndelay(SPINUNIT); - } - return nwo; + *no_way_out = atomic_read(&global_nwo); + + return order; } /* @@ -871,8 +868,7 @@ void do_machine_check(struct pt_regs *regs, long error_code) * Establish sequential order between the CPUs entering the machine * check handler. */ - int order = -1; - + int order; /* * If no_way_out gets set, there is no safe way to recover from this * MCE. If tolerant is cranked up, we'll try anyway. @@ -917,7 +913,7 @@ void do_machine_check(struct pt_regs *regs, long error_code) * This way we don't report duplicated events on shared banks * because the first one to see it will clear it. */ - no_way_out = mce_start(no_way_out, &order); + order = mce_start(&no_way_out); for (i = 0; i < banks; i++) { __clear_bit(i, toclear); if (!bank[i]) -- cgit v1.1 From 4e5b3e690dda890523e93af9c545261f5916a3a6 Mon Sep 17 00:00:00 2001 From: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Date: Mon, 15 Jun 2009 17:20:20 +0900 Subject: x86, mce: add __read_mostly Add __read_mostly to data written during setup. Suggested-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> --- arch/x86/kernel/cpu/mcheck/mce.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index 739fd7e..2d2e0b5 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -57,7 +57,7 @@ static void unexpected_machine_check(struct pt_regs *regs, long error_code) void (*machine_check_vector)(struct pt_regs *, long error_code) = unexpected_machine_check; -int mce_disabled; +int mce_disabled __read_mostly; #ifdef CONFIG_X86_NEW_MCE @@ -76,19 +76,19 @@ DEFINE_PER_CPU(unsigned, mce_exception_count); * 2: SIGBUS or log uncorrected errors (if possible), log corrected errors * 3: never panic or SIGBUS, log all errors (for testing only) */ -static int tolerant = 1; -static int banks; -static u64 *bank; -static unsigned long notify_user; -static int rip_msr; -static int mce_bootlog = -1; -static int monarch_timeout = -1; -static int mce_panic_timeout; -static int mce_dont_log_ce; -int mce_cmci_disabled; -int mce_ignore_ce; -int mce_ser; +static int tolerant __read_mostly = 1; +static int banks __read_mostly; +static u64 *bank __read_mostly; +static int rip_msr __read_mostly; +static int mce_bootlog __read_mostly = -1; +static int monarch_timeout __read_mostly = -1; +static int mce_panic_timeout __read_mostly; +static int mce_dont_log_ce __read_mostly; +int mce_cmci_disabled __read_mostly; +int mce_ignore_ce __read_mostly; +int mce_ser __read_mostly; +static unsigned long notify_user; static char trigger[128]; static char *trigger_argv[2] = { trigger, NULL }; -- cgit v1.1 From 1020bcbcc7da36001d9226c5d57e999949cb80c5 Mon Sep 17 00:00:00 2001 From: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Date: Mon, 15 Jun 2009 17:20:57 +0900 Subject: x86, mce: rename static variables around trigger "trigger" is not straight forward name for valiable that holds name of user mode helper program which triggered by machine check events. This patch renames this valiable and kins to more recognizable names. trigger => mce_helper trigger_argv => mce_helper_argv notify_user => mce_need_notify No functional changes. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> --- arch/x86/kernel/cpu/mcheck/mce.c | 27 ++++++++++++++------------- 1 file changed, 14 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index 2d2e0b5..e8b893e 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -88,9 +88,10 @@ int mce_cmci_disabled __read_mostly; int mce_ignore_ce __read_mostly; int mce_ser __read_mostly; -static unsigned long notify_user; -static char trigger[128]; -static char *trigger_argv[2] = { trigger, NULL }; +/* User mode helper program triggered by machine check event */ +static unsigned long mce_need_notify; +static char mce_helper[128]; +static char *mce_helper_argv[2] = { mce_helper, NULL }; static unsigned long dont_init_banks; @@ -180,7 +181,7 @@ void mce_log(struct mce *mce) wmb(); mce->finished = 1; - set_bit(0, ¬ify_user); + set_bit(0, &mce_need_notify); } static void print_mce(struct mce *m) @@ -1122,7 +1123,7 @@ static void mcheck_timer(unsigned long data) static void mce_do_trigger(struct work_struct *work) { - call_usermodehelper(trigger, trigger_argv, NULL, UMH_NO_WAIT); + call_usermodehelper(mce_helper, mce_helper_argv, NULL, UMH_NO_WAIT); } static DECLARE_WORK(mce_trigger_work, mce_do_trigger); @@ -1139,7 +1140,7 @@ int mce_notify_irq(void) clear_thread_flag(TIF_MCE_NOTIFY); - if (test_and_clear_bit(0, ¬ify_user)) { + if (test_and_clear_bit(0, &mce_need_notify)) { wake_up_interruptible(&mce_wait); /* @@ -1147,7 +1148,7 @@ int mce_notify_irq(void) * work_pending is always cleared before the function is * executed. */ - if (trigger[0] && !work_pending(&mce_trigger_work)) + if (mce_helper[0] && !work_pending(&mce_trigger_work)) schedule_work(&mce_trigger_work); if (__ratelimit(&ratelimit)) @@ -1664,9 +1665,9 @@ static ssize_t set_bank(struct sys_device *s, struct sysdev_attribute *attr, static ssize_t show_trigger(struct sys_device *s, struct sysdev_attribute *attr, char *buf) { - strcpy(buf, trigger); + strcpy(buf, mce_helper); strcat(buf, "\n"); - return strlen(trigger) + 1; + return strlen(mce_helper) + 1; } static ssize_t set_trigger(struct sys_device *s, struct sysdev_attribute *attr, @@ -1675,10 +1676,10 @@ static ssize_t set_trigger(struct sys_device *s, struct sysdev_attribute *attr, char *p; int len; - strncpy(trigger, buf, sizeof(trigger)); - trigger[sizeof(trigger)-1] = 0; - len = strlen(trigger); - p = strchr(trigger, '\n'); + strncpy(mce_helper, buf, sizeof(mce_helper)); + mce_helper[sizeof(mce_helper)-1] = 0; + len = strlen(mce_helper); + p = strchr(mce_helper, '\n'); if (*p) *p = 0; -- cgit v1.1 From 9af43b54ab4509f1dac49637d6917d57292e6518 Mon Sep 17 00:00:00 2001 From: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Date: Mon, 15 Jun 2009 17:21:36 +0900 Subject: x86, mce: sysfs entries for new mce options Add sysfs interface for admins who want to tweak these options without rebooting the system. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> --- arch/x86/kernel/cpu/mcheck/mce.c | 84 +++++++++++++++++++++++++++++++++++++++- 1 file changed, 83 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index e8b893e..4b62443 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -1626,6 +1626,26 @@ static void mce_restart(void) on_each_cpu(mce_cpu_restart, NULL, 1); } +/* Toggle features for corrected errors */ +static void mce_disable_ce(void *all) +{ + if (!mce_available(¤t_cpu_data)) + return; + if (all) + del_timer_sync(&__get_cpu_var(mce_timer)); + cmci_clear(); +} + +static void mce_enable_ce(void *all) +{ + if (!mce_available(¤t_cpu_data)) + return; + cmci_reenable(); + cmci_recheck(); + if (all) + mce_init_timer(); +} + static struct sysdev_class mce_sysclass = { .suspend = mce_suspend, .shutdown = mce_shutdown, @@ -1687,6 +1707,52 @@ static ssize_t set_trigger(struct sys_device *s, struct sysdev_attribute *attr, return len; } +static ssize_t set_ignore_ce(struct sys_device *s, + struct sysdev_attribute *attr, + const char *buf, size_t size) +{ + u64 new; + + if (strict_strtoull(buf, 0, &new) < 0) + return -EINVAL; + + if (mce_ignore_ce ^ !!new) { + if (new) { + /* disable ce features */ + on_each_cpu(mce_disable_ce, (void *)1, 1); + mce_ignore_ce = 1; + } else { + /* enable ce features */ + mce_ignore_ce = 0; + on_each_cpu(mce_enable_ce, (void *)1, 1); + } + } + return size; +} + +static ssize_t set_cmci_disabled(struct sys_device *s, + struct sysdev_attribute *attr, + const char *buf, size_t size) +{ + u64 new; + + if (strict_strtoull(buf, 0, &new) < 0) + return -EINVAL; + + if (mce_cmci_disabled ^ !!new) { + if (new) { + /* disable cmci */ + on_each_cpu(mce_disable_ce, NULL, 1); + mce_cmci_disabled = 1; + } else { + /* enable cmci */ + mce_cmci_disabled = 0; + on_each_cpu(mce_enable_ce, NULL, 1); + } + } + return size; +} + static ssize_t store_int_with_restart(struct sys_device *s, struct sysdev_attribute *attr, const char *buf, size_t size) @@ -1699,6 +1765,7 @@ static ssize_t store_int_with_restart(struct sys_device *s, static SYSDEV_ATTR(trigger, 0644, show_trigger, set_trigger); static SYSDEV_INT_ATTR(tolerant, 0644, tolerant); static SYSDEV_INT_ATTR(monarch_timeout, 0644, monarch_timeout); +static SYSDEV_INT_ATTR(dont_log_ce, 0644, mce_dont_log_ce); static struct sysdev_ext_attribute attr_check_interval = { _SYSDEV_ATTR(check_interval, 0644, sysdev_show_int, @@ -1706,9 +1773,24 @@ static struct sysdev_ext_attribute attr_check_interval = { &check_interval }; +static struct sysdev_ext_attribute attr_ignore_ce = { + _SYSDEV_ATTR(ignore_ce, 0644, sysdev_show_int, set_ignore_ce), + &mce_ignore_ce +}; + +static struct sysdev_ext_attribute attr_cmci_disabled = { + _SYSDEV_ATTR(ignore_ce, 0644, sysdev_show_int, set_cmci_disabled), + &mce_cmci_disabled +}; + static struct sysdev_attribute *mce_attrs[] = { - &attr_tolerant.attr, &attr_check_interval.attr, &attr_trigger, + &attr_tolerant.attr, + &attr_check_interval.attr, + &attr_trigger, &attr_monarch_timeout.attr, + &attr_dont_log_ce.attr, + &attr_ignore_ce.attr, + &attr_cmci_disabled.attr, NULL }; -- cgit v1.1 From 9e55e44e39798541ba39d57f4b569deb555ae1ce Mon Sep 17 00:00:00 2001 From: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Date: Mon, 15 Jun 2009 17:22:15 +0900 Subject: x86, mce: unify mce.h There are 2 headers: arch/x86/include/asm/mce.h arch/x86/kernel/cpu/mcheck/mce.h and in the latter small header: #include <asm/mce.h> This patch move all contents in the latter header into the former, and fix all files using the latter to include the former instead. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> --- arch/x86/include/asm/mce.h | 36 +++++++++++++++++++++++++++-- arch/x86/kernel/cpu/mcheck/k7.c | 3 +-- arch/x86/kernel/cpu/mcheck/mce.c | 1 - arch/x86/kernel/cpu/mcheck/mce.h | 38 ------------------------------- arch/x86/kernel/cpu/mcheck/mce_intel.c | 3 +-- arch/x86/kernel/cpu/mcheck/mce_intel_64.c | 2 -- arch/x86/kernel/cpu/mcheck/non-fatal.c | 3 +-- arch/x86/kernel/cpu/mcheck/p4.c | 3 +-- arch/x86/kernel/cpu/mcheck/p5.c | 3 +-- arch/x86/kernel/cpu/mcheck/p6.c | 3 +-- arch/x86/kernel/cpu/mcheck/winchip.c | 3 +-- arch/x86/kernel/traps.c | 3 +-- 12 files changed, 42 insertions(+), 59 deletions(-) delete mode 100644 arch/x86/kernel/cpu/mcheck/mce.h (limited to 'arch') diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h index 540a466..aae6fe2 100644 --- a/arch/x86/include/asm/mce.h +++ b/arch/x86/include/asm/mce.h @@ -102,10 +102,42 @@ struct mce_log { #ifdef __KERNEL__ +#include <linux/percpu.h> +#include <linux/init.h> +#include <asm/atomic.h> + extern int mce_disabled; -#include <asm/atomic.h> -#include <linux/percpu.h> +#ifdef CONFIG_X86_OLD_MCE +void amd_mcheck_init(struct cpuinfo_x86 *c); +void intel_p4_mcheck_init(struct cpuinfo_x86 *c); +void intel_p6_mcheck_init(struct cpuinfo_x86 *c); +#endif + +#ifdef CONFIG_X86_ANCIENT_MCE +void intel_p5_mcheck_init(struct cpuinfo_x86 *c); +void winchip_mcheck_init(struct cpuinfo_x86 *c); +extern int mce_p5_enable; +static inline int mce_p5_enabled(void) { return mce_p5_enable; } +static inline void enable_p5_mce(void) { mce_p5_enable = 1; } +#else +static inline void intel_p5_mcheck_init(struct cpuinfo_x86 *c) {} +static inline void winchip_mcheck_init(struct cpuinfo_x86 *c) {} +static inline int mce_p5_enabled(void) { return 0; } +static inline void enable_p5_mce(void) { } +#endif + +/* Call the installed machine check handler for this CPU setup. */ +extern void (*machine_check_vector)(struct pt_regs *, long error_code); + +#ifdef CONFIG_X86_OLD_MCE +extern int nr_mce_banks; +extern void intel_set_thermal_handler(void); +#else +static inline void intel_set_thermal_handler(void) { } +#endif + +void intel_init_thermal(struct cpuinfo_x86 *c); void mce_setup(struct mce *m); void mce_log(struct mce *m); diff --git a/arch/x86/kernel/cpu/mcheck/k7.c b/arch/x86/kernel/cpu/mcheck/k7.c index 89e5104..b945d5d 100644 --- a/arch/x86/kernel/cpu/mcheck/k7.c +++ b/arch/x86/kernel/cpu/mcheck/k7.c @@ -10,10 +10,9 @@ #include <asm/processor.h> #include <asm/system.h> +#include <asm/mce.h> #include <asm/msr.h> -#include "mce.h" - /* Machine Check Handler For AMD Athlon/Duron: */ static void k7_machine_check(struct pt_regs *regs, long error_code) { diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index 4b62443..faedd77 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -44,7 +44,6 @@ #include <asm/msr.h> #include "mce-internal.h" -#include "mce.h" /* Handle unconfigured int18 (should never happen) */ static void unexpected_machine_check(struct pt_regs *regs, long error_code) diff --git a/arch/x86/kernel/cpu/mcheck/mce.h b/arch/x86/kernel/cpu/mcheck/mce.h deleted file mode 100644 index 84a552b..0000000 --- a/arch/x86/kernel/cpu/mcheck/mce.h +++ /dev/null @@ -1,38 +0,0 @@ -#include <linux/init.h> -#include <asm/mce.h> - -#ifdef CONFIG_X86_OLD_MCE -void amd_mcheck_init(struct cpuinfo_x86 *c); -void intel_p4_mcheck_init(struct cpuinfo_x86 *c); -void intel_p6_mcheck_init(struct cpuinfo_x86 *c); -#endif - -#ifdef CONFIG_X86_ANCIENT_MCE -void intel_p5_mcheck_init(struct cpuinfo_x86 *c); -void winchip_mcheck_init(struct cpuinfo_x86 *c); -extern int mce_p5_enable; -static inline int mce_p5_enabled(void) { return mce_p5_enable; } -static inline void enable_p5_mce(void) { mce_p5_enable = 1; } -#else -static inline void intel_p5_mcheck_init(struct cpuinfo_x86 *c) {} -static inline void winchip_mcheck_init(struct cpuinfo_x86 *c) {} -static inline int mce_p5_enabled(void) { return 0; } -static inline void enable_p5_mce(void) { } -#endif - -/* Call the installed machine check handler for this CPU setup. */ -extern void (*machine_check_vector)(struct pt_regs *, long error_code); - -#ifdef CONFIG_X86_OLD_MCE - -extern int nr_mce_banks; - -void intel_set_thermal_handler(void); - -#else - -static inline void intel_set_thermal_handler(void) { } - -#endif - -void intel_init_thermal(struct cpuinfo_x86 *c); diff --git a/arch/x86/kernel/cpu/mcheck/mce_intel.c b/arch/x86/kernel/cpu/mcheck/mce_intel.c index 2b011d2..475478b 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_intel.c +++ b/arch/x86/kernel/cpu/mcheck/mce_intel.c @@ -11,10 +11,9 @@ #include <asm/processor.h> #include <asm/system.h> #include <asm/apic.h> +#include <asm/mce.h> #include <asm/msr.h> -#include "mce.h" - void intel_init_thermal(struct cpuinfo_x86 *c) { unsigned int cpu = smp_processor_id(); diff --git a/arch/x86/kernel/cpu/mcheck/mce_intel_64.c b/arch/x86/kernel/cpu/mcheck/mce_intel_64.c index f2ef695..c548111 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_intel_64.c +++ b/arch/x86/kernel/cpu/mcheck/mce_intel_64.c @@ -16,8 +16,6 @@ #include <asm/idle.h> #include <asm/therm_throt.h> -#include "mce.h" - asmlinkage void smp_thermal_interrupt(void) { __u64 msr_val; diff --git a/arch/x86/kernel/cpu/mcheck/non-fatal.c b/arch/x86/kernel/cpu/mcheck/non-fatal.c index 70b7104..f5f2d6f 100644 --- a/arch/x86/kernel/cpu/mcheck/non-fatal.c +++ b/arch/x86/kernel/cpu/mcheck/non-fatal.c @@ -17,10 +17,9 @@ #include <asm/processor.h> #include <asm/system.h> +#include <asm/mce.h> #include <asm/msr.h> -#include "mce.h" - static int firstbank; #define MCE_RATE (15*HZ) /* timer rate is 15s */ diff --git a/arch/x86/kernel/cpu/mcheck/p4.c b/arch/x86/kernel/cpu/mcheck/p4.c index 82cee10..8d3e40e 100644 --- a/arch/x86/kernel/cpu/mcheck/p4.c +++ b/arch/x86/kernel/cpu/mcheck/p4.c @@ -12,10 +12,9 @@ #include <asm/processor.h> #include <asm/system.h> #include <asm/apic.h> +#include <asm/mce.h> #include <asm/msr.h> -#include "mce.h" - /* as supported by the P4/Xeon family */ struct intel_mce_extended_msrs { u32 eax; diff --git a/arch/x86/kernel/cpu/mcheck/p5.c b/arch/x86/kernel/cpu/mcheck/p5.c index 015f481..747853f 100644 --- a/arch/x86/kernel/cpu/mcheck/p5.c +++ b/arch/x86/kernel/cpu/mcheck/p5.c @@ -10,10 +10,9 @@ #include <asm/processor.h> #include <asm/system.h> +#include <asm/mce.h> #include <asm/msr.h> -#include "mce.h" - /* By default disabled */ int mce_p5_enable; diff --git a/arch/x86/kernel/cpu/mcheck/p6.c b/arch/x86/kernel/cpu/mcheck/p6.c index 43c24e6..01e4f81 100644 --- a/arch/x86/kernel/cpu/mcheck/p6.c +++ b/arch/x86/kernel/cpu/mcheck/p6.c @@ -10,10 +10,9 @@ #include <asm/processor.h> #include <asm/system.h> +#include <asm/mce.h> #include <asm/msr.h> -#include "mce.h" - /* Machine Check Handler For PII/PIII */ static void intel_machine_check(struct pt_regs *regs, long error_code) { diff --git a/arch/x86/kernel/cpu/mcheck/winchip.c b/arch/x86/kernel/cpu/mcheck/winchip.c index 81b0248..54060f5 100644 --- a/arch/x86/kernel/cpu/mcheck/winchip.c +++ b/arch/x86/kernel/cpu/mcheck/winchip.c @@ -9,10 +9,9 @@ #include <asm/processor.h> #include <asm/system.h> +#include <asm/mce.h> #include <asm/msr.h> -#include "mce.h" - /* Machine check handler for WinChip C6: */ static void winchip_machine_check(struct pt_regs *regs, long error_code) { diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c index 1e1e27b..71f9c74 100644 --- a/arch/x86/kernel/traps.c +++ b/arch/x86/kernel/traps.c @@ -53,6 +53,7 @@ #include <asm/traps.h> #include <asm/desc.h> #include <asm/i387.h> +#include <asm/mce.h> #include <asm/mach_traps.h> @@ -64,8 +65,6 @@ #include <asm/setup.h> #include <asm/traps.h> -#include "cpu/mcheck/mce.h" - asmlinkage int system_call(void); /* Do we ignore FPU interrupts ? */ -- cgit v1.1 From c697836985e18d9c34897428ba563b13044a6dcd Mon Sep 17 00:00:00 2001 From: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Date: Mon, 15 Jun 2009 17:22:49 +0900 Subject: x86, mce: make mce_disabled boolean The mce_disabled on 32bit is a tristate variable [1,0,-1], while 64bit version is boolean [0,1]. This patch makes mce_disabled always boolean, and use mce_p5_enabled to indicate the third state instead. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> --- arch/x86/include/asm/mce.h | 8 +++----- arch/x86/kernel/cpu/mcheck/mce.c | 8 +++----- arch/x86/kernel/cpu/mcheck/p5.c | 12 +++++------- 3 files changed, 11 insertions(+), 17 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h index aae6fe2..6568cde 100644 --- a/arch/x86/include/asm/mce.h +++ b/arch/x86/include/asm/mce.h @@ -107,6 +107,7 @@ struct mce_log { #include <asm/atomic.h> extern int mce_disabled; +extern int mce_p5_enabled; #ifdef CONFIG_X86_OLD_MCE void amd_mcheck_init(struct cpuinfo_x86 *c); @@ -117,14 +118,11 @@ void intel_p6_mcheck_init(struct cpuinfo_x86 *c); #ifdef CONFIG_X86_ANCIENT_MCE void intel_p5_mcheck_init(struct cpuinfo_x86 *c); void winchip_mcheck_init(struct cpuinfo_x86 *c); -extern int mce_p5_enable; -static inline int mce_p5_enabled(void) { return mce_p5_enable; } -static inline void enable_p5_mce(void) { mce_p5_enable = 1; } +static inline void enable_p5_mce(void) { mce_p5_enabled = 1; } #else static inline void intel_p5_mcheck_init(struct cpuinfo_x86 *c) {} static inline void winchip_mcheck_init(struct cpuinfo_x86 *c) {} -static inline int mce_p5_enabled(void) { return 0; } -static inline void enable_p5_mce(void) { } +static inline void enable_p5_mce(void) {} #endif /* Call the installed machine check handler for this CPU setup. */ diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index faedd77..6095e02 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -1286,8 +1286,7 @@ static void __cpuinit mce_ancient_init(struct cpuinfo_x86 *c) return; switch (c->x86_vendor) { case X86_VENDOR_INTEL: - if (mce_p5_enabled()) - intel_p5_mcheck_init(c); + intel_p5_mcheck_init(c); break; case X86_VENDOR_CENTAUR: winchip_mcheck_init(c); @@ -2002,7 +2001,7 @@ EXPORT_SYMBOL_GPL(nr_mce_banks); /* non-fatal.o */ /* This has to be run for each processor */ void mcheck_init(struct cpuinfo_x86 *c) { - if (mce_disabled == 1) + if (mce_disabled) return; switch (c->x86_vendor) { @@ -2032,10 +2031,9 @@ void mcheck_init(struct cpuinfo_x86 *c) static int __init mcheck_enable(char *str) { - mce_disabled = -1; + mce_p5_enabled = 1; return 1; } - __setup("mce", mcheck_enable); #endif /* CONFIG_X86_OLD_MCE */ diff --git a/arch/x86/kernel/cpu/mcheck/p5.c b/arch/x86/kernel/cpu/mcheck/p5.c index 747853f..5c0e653 100644 --- a/arch/x86/kernel/cpu/mcheck/p5.c +++ b/arch/x86/kernel/cpu/mcheck/p5.c @@ -14,7 +14,7 @@ #include <asm/msr.h> /* By default disabled */ -int mce_p5_enable; +int mce_p5_enabled __read_mostly; /* Machine check handler for Pentium class Intel CPUs: */ static void pentium_machine_check(struct pt_regs *regs, long error_code) @@ -42,15 +42,13 @@ void intel_p5_mcheck_init(struct cpuinfo_x86 *c) { u32 l, h; - /* Check for MCE support: */ - if (!cpu_has(c, X86_FEATURE_MCE)) + /* Default P5 to off as its often misconnected: */ + if (!mce_p5_enabled) return; -#ifdef CONFIG_X86_OLD_MCE - /* Default P5 to off as its often misconnected: */ - if (mce_disabled != -1) + /* Check for MCE support: */ + if (!cpu_has(c, X86_FEATURE_MCE)) return; -#endif machine_check_vector = pentium_machine_check; /* Make sure the vector pointer is visible before we enable MCEs: */ -- cgit v1.1 From 3adacb70d32046ccc9f0333b50bb2ba1582ccdf4 Mon Sep 17 00:00:00 2001 From: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Date: Mon, 15 Jun 2009 17:23:28 +0900 Subject: x86, mce: unify smp_thermal_interrupt, prepare p4 Remove unused argument regs from handlers, and use inc_irq_stat. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> --- arch/x86/kernel/cpu/mcheck/p4.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/mcheck/p4.c b/arch/x86/kernel/cpu/mcheck/p4.c index 8d3e40e..ddeed6e 100644 --- a/arch/x86/kernel/cpu/mcheck/p4.c +++ b/arch/x86/kernel/cpu/mcheck/p4.c @@ -35,7 +35,7 @@ static int mce_num_extended_msrs; #ifdef CONFIG_X86_MCE_P4THERMAL -static void unexpected_thermal_interrupt(struct pt_regs *regs) +static void unexpected_thermal_interrupt(void) { printk(KERN_ERR "CPU%d: Unexpected LVT TMR interrupt!\n", smp_processor_id()); @@ -43,7 +43,7 @@ static void unexpected_thermal_interrupt(struct pt_regs *regs) } /* P4/Xeon Thermal transition interrupt handler: */ -static void intel_thermal_interrupt(struct pt_regs *regs) +static void intel_thermal_interrupt(void) { __u64 msr_val; @@ -54,14 +54,13 @@ static void intel_thermal_interrupt(struct pt_regs *regs) } /* Thermal interrupt handler for this CPU setup: */ -static void (*vendor_thermal_interrupt)(struct pt_regs *regs) = - unexpected_thermal_interrupt; +static void (*vendor_thermal_interrupt)(void) = unexpected_thermal_interrupt; void smp_thermal_interrupt(struct pt_regs *regs) { irq_enter(); - vendor_thermal_interrupt(regs); - __get_cpu_var(irq_stat).irq_thermal_count++; + vendor_thermal_interrupt(); + inc_irq_stat(irq_thermal_count); irq_exit(); } -- cgit v1.1 From 5335612a574a45beab14193ec641ed2f45e7a523 Mon Sep 17 00:00:00 2001 From: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Date: Mon, 15 Jun 2009 17:24:09 +0900 Subject: x86, mce: unify smp_thermal_interrupt, prepare mce_intel_64 Break smp_thermal_interrupt() into two functions. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> --- arch/x86/kernel/cpu/mcheck/mce_intel_64.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/mcheck/mce_intel_64.c b/arch/x86/kernel/cpu/mcheck/mce_intel_64.c index c548111..a5232b2 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_intel_64.c +++ b/arch/x86/kernel/cpu/mcheck/mce_intel_64.c @@ -16,19 +16,21 @@ #include <asm/idle.h> #include <asm/therm_throt.h> -asmlinkage void smp_thermal_interrupt(void) +static void intel_thermal_interrupt(void) { __u64 msr_val; - ack_APIC_irq(); - - exit_idle(); - irq_enter(); - rdmsrl(MSR_IA32_THERM_STATUS, msr_val); if (therm_throt_process(msr_val & THERM_STATUS_PROCHOT)) mce_log_therm_throt_event(msr_val); +} +asmlinkage void smp_thermal_interrupt(void) +{ + ack_APIC_irq(); + exit_idle(); + irq_enter(); + intel_thermal_interrupt(); inc_irq_stat(irq_thermal_count); irq_exit(); } -- cgit v1.1 From e8ce2c5ee826b3787202493effcd08d4b1e1e639 Mon Sep 17 00:00:00 2001 From: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Date: Mon, 15 Jun 2009 17:24:40 +0900 Subject: x86, mce: unify smp_thermal_interrupt, prepare Let them in same shape. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> --- arch/x86/include/asm/mce.h | 25 ++++++++++++++----------- arch/x86/kernel/cpu/mcheck/mce_intel_64.c | 20 ++++++++++++++++++-- arch/x86/kernel/cpu/mcheck/p4.c | 10 ++++++---- 3 files changed, 38 insertions(+), 17 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h index 6568cde..3bc827c 100644 --- a/arch/x86/include/asm/mce.h +++ b/arch/x86/include/asm/mce.h @@ -110,6 +110,7 @@ extern int mce_disabled; extern int mce_p5_enabled; #ifdef CONFIG_X86_OLD_MCE +extern int nr_mce_banks; void amd_mcheck_init(struct cpuinfo_x86 *c); void intel_p4_mcheck_init(struct cpuinfo_x86 *c); void intel_p6_mcheck_init(struct cpuinfo_x86 *c); @@ -128,15 +129,6 @@ static inline void enable_p5_mce(void) {} /* Call the installed machine check handler for this CPU setup. */ extern void (*machine_check_vector)(struct pt_regs *, long error_code); -#ifdef CONFIG_X86_OLD_MCE -extern int nr_mce_banks; -extern void intel_set_thermal_handler(void); -#else -static inline void intel_set_thermal_handler(void) { } -#endif - -void intel_init_thermal(struct cpuinfo_x86 *c); - void mce_setup(struct mce *m); void mce_log(struct mce *m); DECLARE_PER_CPU(struct sys_device, mce_dev); @@ -175,8 +167,6 @@ int mce_available(struct cpuinfo_x86 *c); DECLARE_PER_CPU(unsigned, mce_exception_count); DECLARE_PER_CPU(unsigned, mce_poll_count); -void mce_log_therm_throt_event(__u64 status); - extern atomic_t mce_entry; void do_machine_check(struct pt_regs *, long); @@ -205,5 +195,18 @@ void mcheck_init(struct cpuinfo_x86 *c); extern void (*mce_threshold_vector)(void); +/* + * Thermal handler + */ + +void intel_set_thermal_handler(void); +void intel_init_thermal(struct cpuinfo_x86 *c); + +#ifdef CONFIG_X86_NEW_MCE +void mce_log_therm_throt_event(__u64 status); +#else +static inline void mce_log_therm_throt_event(__u64 status) {} +#endif + #endif /* __KERNEL__ */ #endif /* _ASM_X86_MCE_H */ diff --git a/arch/x86/kernel/cpu/mcheck/mce_intel_64.c b/arch/x86/kernel/cpu/mcheck/mce_intel_64.c index a5232b2..922e3a4 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_intel_64.c +++ b/arch/x86/kernel/cpu/mcheck/mce_intel_64.c @@ -16,6 +16,14 @@ #include <asm/idle.h> #include <asm/therm_throt.h> +static void unexpected_thermal_interrupt(void) +{ + printk(KERN_ERR "CPU%d: Unexpected LVT TMR interrupt!\n", + smp_processor_id()); + add_taint(TAINT_MACHINE_CHECK); +} + +/* P4/Xeon Thermal transition interrupt handler: */ static void intel_thermal_interrupt(void) { __u64 msr_val; @@ -25,14 +33,22 @@ static void intel_thermal_interrupt(void) mce_log_therm_throt_event(msr_val); } +/* Thermal interrupt handler for this CPU setup: */ +static void (*vendor_thermal_interrupt)(void) = unexpected_thermal_interrupt; + asmlinkage void smp_thermal_interrupt(void) { - ack_APIC_irq(); exit_idle(); irq_enter(); - intel_thermal_interrupt(); inc_irq_stat(irq_thermal_count); + intel_thermal_interrupt(); irq_exit(); + ack_APIC_irq(); +} + +void intel_set_thermal_handler(void) +{ + vendor_thermal_interrupt = intel_thermal_interrupt; } /* diff --git a/arch/x86/kernel/cpu/mcheck/p4.c b/arch/x86/kernel/cpu/mcheck/p4.c index ddeed6e..75313f5 100644 --- a/arch/x86/kernel/cpu/mcheck/p4.c +++ b/arch/x86/kernel/cpu/mcheck/p4.c @@ -12,6 +12,7 @@ #include <asm/processor.h> #include <asm/system.h> #include <asm/apic.h> +#include <asm/idle.h> #include <asm/mce.h> #include <asm/msr.h> @@ -47,10 +48,9 @@ static void intel_thermal_interrupt(void) { __u64 msr_val; - ack_APIC_irq(); - rdmsrl(MSR_IA32_THERM_STATUS, msr_val); - therm_throt_process(msr_val & THERM_STATUS_PROCHOT); + if (therm_throt_process(msr_val & THERM_STATUS_PROCHOT)) + mce_log_therm_throt_event(msr_val); } /* Thermal interrupt handler for this CPU setup: */ @@ -58,10 +58,12 @@ static void (*vendor_thermal_interrupt)(void) = unexpected_thermal_interrupt; void smp_thermal_interrupt(struct pt_regs *regs) { + exit_idle(); irq_enter(); - vendor_thermal_interrupt(); inc_irq_stat(irq_thermal_count); + vendor_thermal_interrupt(); irq_exit(); + ack_APIC_irq(); } void intel_set_thermal_handler(void) -- cgit v1.1 From a65c88dd2c83b569dbd13778da689861bdf977f2 Mon Sep 17 00:00:00 2001 From: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Date: Mon, 15 Jun 2009 17:25:27 +0900 Subject: x86, mce: unify smp_thermal_interrupt Put common functions into therm_throt.c, modify Makefile. unexpected_thermal_interrupt intel_thermal_interrupt smp_thermal_interrupt intel_set_thermal_handler Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> --- arch/x86/kernel/cpu/mcheck/Makefile | 7 ++--- arch/x86/kernel/cpu/mcheck/mce_intel_64.c | 38 -------------------------- arch/x86/kernel/cpu/mcheck/p4.c | 45 ------------------------------- arch/x86/kernel/cpu/mcheck/therm_throt.c | 40 ++++++++++++++++++++++++++- 4 files changed, 43 insertions(+), 87 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/mcheck/Makefile b/arch/x86/kernel/cpu/mcheck/Makefile index 45004fa..53df57d 100644 --- a/arch/x86/kernel/cpu/mcheck/Makefile +++ b/arch/x86/kernel/cpu/mcheck/Makefile @@ -1,11 +1,12 @@ -obj-y = mce.o therm_throt.o +obj-y = mce.o obj-$(CONFIG_X86_NEW_MCE) += mce-severity.o obj-$(CONFIG_X86_OLD_MCE) += k7.o p4.o p6.o obj-$(CONFIG_X86_ANCIENT_MCE) += winchip.o p5.o -obj-$(CONFIG_X86_MCE_P4THERMAL) += mce_intel.o -obj-$(CONFIG_X86_MCE_INTEL) += mce_intel_64.o mce_intel.o +obj-$(CONFIG_X86_MCE_INTEL) += mce_intel_64.o obj-$(CONFIG_X86_MCE_AMD) += mce_amd_64.o obj-$(CONFIG_X86_MCE_NONFATAL) += non-fatal.o obj-$(CONFIG_X86_MCE_THRESHOLD) += threshold.o obj-$(CONFIG_X86_MCE_INJECT) += mce-inject.o + +obj-$(CONFIG_X86_THERMAL_VECTOR) += therm_throt.o mce_intel.o diff --git a/arch/x86/kernel/cpu/mcheck/mce_intel_64.c b/arch/x86/kernel/cpu/mcheck/mce_intel_64.c index 922e3a4..3b7a057 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_intel_64.c +++ b/arch/x86/kernel/cpu/mcheck/mce_intel_64.c @@ -9,48 +9,10 @@ #include <linux/interrupt.h> #include <linux/percpu.h> #include <asm/processor.h> -#include <asm/apic.h> #include <asm/msr.h> #include <asm/mce.h> -#include <asm/hw_irq.h> -#include <asm/idle.h> #include <asm/therm_throt.h> -static void unexpected_thermal_interrupt(void) -{ - printk(KERN_ERR "CPU%d: Unexpected LVT TMR interrupt!\n", - smp_processor_id()); - add_taint(TAINT_MACHINE_CHECK); -} - -/* P4/Xeon Thermal transition interrupt handler: */ -static void intel_thermal_interrupt(void) -{ - __u64 msr_val; - - rdmsrl(MSR_IA32_THERM_STATUS, msr_val); - if (therm_throt_process(msr_val & THERM_STATUS_PROCHOT)) - mce_log_therm_throt_event(msr_val); -} - -/* Thermal interrupt handler for this CPU setup: */ -static void (*vendor_thermal_interrupt)(void) = unexpected_thermal_interrupt; - -asmlinkage void smp_thermal_interrupt(void) -{ - exit_idle(); - irq_enter(); - inc_irq_stat(irq_thermal_count); - intel_thermal_interrupt(); - irq_exit(); - ack_APIC_irq(); -} - -void intel_set_thermal_handler(void) -{ - vendor_thermal_interrupt = intel_thermal_interrupt; -} - /* * Support for Intel Correct Machine Check Interrupts. This allows * the CPU to raise an interrupt when a corrected machine check happened. diff --git a/arch/x86/kernel/cpu/mcheck/p4.c b/arch/x86/kernel/cpu/mcheck/p4.c index 75313f5..76c5f03 100644 --- a/arch/x86/kernel/cpu/mcheck/p4.c +++ b/arch/x86/kernel/cpu/mcheck/p4.c @@ -1,8 +1,6 @@ /* * P4 specific Machine Check Exception Reporting */ - -#include <linux/interrupt.h> #include <linux/kernel.h> #include <linux/types.h> #include <linux/init.h> @@ -10,9 +8,6 @@ #include <asm/therm_throt.h> #include <asm/processor.h> -#include <asm/system.h> -#include <asm/apic.h> -#include <asm/idle.h> #include <asm/mce.h> #include <asm/msr.h> @@ -33,46 +28,6 @@ struct intel_mce_extended_msrs { static int mce_num_extended_msrs; - -#ifdef CONFIG_X86_MCE_P4THERMAL - -static void unexpected_thermal_interrupt(void) -{ - printk(KERN_ERR "CPU%d: Unexpected LVT TMR interrupt!\n", - smp_processor_id()); - add_taint(TAINT_MACHINE_CHECK); -} - -/* P4/Xeon Thermal transition interrupt handler: */ -static void intel_thermal_interrupt(void) -{ - __u64 msr_val; - - rdmsrl(MSR_IA32_THERM_STATUS, msr_val); - if (therm_throt_process(msr_val & THERM_STATUS_PROCHOT)) - mce_log_therm_throt_event(msr_val); -} - -/* Thermal interrupt handler for this CPU setup: */ -static void (*vendor_thermal_interrupt)(void) = unexpected_thermal_interrupt; - -void smp_thermal_interrupt(struct pt_regs *regs) -{ - exit_idle(); - irq_enter(); - inc_irq_stat(irq_thermal_count); - vendor_thermal_interrupt(); - irq_exit(); - ack_APIC_irq(); -} - -void intel_set_thermal_handler(void) -{ - vendor_thermal_interrupt = intel_thermal_interrupt; -} - -#endif /* CONFIG_X86_MCE_P4THERMAL */ - /* P4/Xeon Extended MCE MSR retrieval, return 0 if unsupported */ static void intel_get_extended_msrs(struct intel_mce_extended_msrs *r) { diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c index 7b1ae2e..b3792b1 100644 --- a/arch/x86/kernel/cpu/mcheck/therm_throt.c +++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c @@ -13,6 +13,7 @@ * Credits: Adapted from Zwane Mwaikambo's original code in mce_intel.c. * Inspired by Ross Biro's and Al Borchers' counter code. */ +#include <linux/interrupt.h> #include <linux/notifier.h> #include <linux/jiffies.h> #include <linux/percpu.h> @@ -20,6 +21,8 @@ #include <linux/cpu.h> #include <asm/therm_throt.h> +#include <asm/idle.h> +#include <asm/mce.h> /* How long to wait between reporting thermal events */ #define CHECK_INTERVAL (300 * HZ) @@ -186,6 +189,41 @@ static __init int thermal_throttle_init_device(void) return 0; } - device_initcall(thermal_throttle_init_device); + #endif /* CONFIG_SYSFS */ + +/* Thermal transition interrupt handler */ +void intel_thermal_interrupt(void) +{ + __u64 msr_val; + + rdmsrl(MSR_IA32_THERM_STATUS, msr_val); + if (therm_throt_process(msr_val & THERM_STATUS_PROCHOT)) + mce_log_therm_throt_event(msr_val); +} + +static void unexpected_thermal_interrupt(void) +{ + printk(KERN_ERR "CPU%d: Unexpected LVT TMR interrupt!\n", + smp_processor_id()); + add_taint(TAINT_MACHINE_CHECK); +} + +static void (*smp_thermal_vector)(void) = unexpected_thermal_interrupt; + +asmlinkage void smp_thermal_interrupt(struct pt_regs *regs) +{ + exit_idle(); + irq_enter(); + inc_irq_stat(irq_thermal_count); + smp_thermal_vector(); + irq_exit(); + /* Ack only at the end to avoid potential reentry */ + ack_APIC_irq(); +} + +void intel_set_thermal_handler(void) +{ + smp_thermal_vector = intel_thermal_interrupt; +} -- cgit v1.1 From 895287c0a6aa571160c47ee10de11b542166c4f9 Mon Sep 17 00:00:00 2001 From: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Date: Mon, 15 Jun 2009 17:26:10 +0900 Subject: x86, mce: squash mce_intel.c into therm_throt.c move intel_init_thermal() into therm_throt.c Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> --- arch/x86/kernel/cpu/mcheck/Makefile | 2 +- arch/x86/kernel/cpu/mcheck/mce_intel.c | 73 -------------------------------- arch/x86/kernel/cpu/mcheck/therm_throt.c | 66 +++++++++++++++++++++++++++++ 3 files changed, 67 insertions(+), 74 deletions(-) delete mode 100644 arch/x86/kernel/cpu/mcheck/mce_intel.c (limited to 'arch') diff --git a/arch/x86/kernel/cpu/mcheck/Makefile b/arch/x86/kernel/cpu/mcheck/Makefile index 53df57d..659564e 100644 --- a/arch/x86/kernel/cpu/mcheck/Makefile +++ b/arch/x86/kernel/cpu/mcheck/Makefile @@ -9,4 +9,4 @@ obj-$(CONFIG_X86_MCE_NONFATAL) += non-fatal.o obj-$(CONFIG_X86_MCE_THRESHOLD) += threshold.o obj-$(CONFIG_X86_MCE_INJECT) += mce-inject.o -obj-$(CONFIG_X86_THERMAL_VECTOR) += therm_throt.o mce_intel.o +obj-$(CONFIG_X86_THERMAL_VECTOR) += therm_throt.o diff --git a/arch/x86/kernel/cpu/mcheck/mce_intel.c b/arch/x86/kernel/cpu/mcheck/mce_intel.c deleted file mode 100644 index 475478b..0000000 --- a/arch/x86/kernel/cpu/mcheck/mce_intel.c +++ /dev/null @@ -1,73 +0,0 @@ -/* - * Common code for Intel machine checks - */ -#include <linux/interrupt.h> -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/smp.h> - -#include <asm/therm_throt.h> -#include <asm/processor.h> -#include <asm/system.h> -#include <asm/apic.h> -#include <asm/mce.h> -#include <asm/msr.h> - -void intel_init_thermal(struct cpuinfo_x86 *c) -{ - unsigned int cpu = smp_processor_id(); - int tm2 = 0; - u32 l, h; - - /* Thermal monitoring depends on ACPI and clock modulation*/ - if (!cpu_has(c, X86_FEATURE_ACPI) || !cpu_has(c, X86_FEATURE_ACC)) - return; - - /* - * First check if its enabled already, in which case there might - * be some SMM goo which handles it, so we can't even put a handler - * since it might be delivered via SMI already: - */ - rdmsr(MSR_IA32_MISC_ENABLE, l, h); - h = apic_read(APIC_LVTTHMR); - if ((l & MSR_IA32_MISC_ENABLE_TM1) && (h & APIC_DM_SMI)) { - printk(KERN_DEBUG - "CPU%d: Thermal monitoring handled by SMI\n", cpu); - return; - } - - if (cpu_has(c, X86_FEATURE_TM2) && (l & MSR_IA32_MISC_ENABLE_TM2)) - tm2 = 1; - - /* Check whether a vector already exists */ - if (h & APIC_VECTOR_MASK) { - printk(KERN_DEBUG - "CPU%d: Thermal LVT vector (%#x) already installed\n", - cpu, (h & APIC_VECTOR_MASK)); - return; - } - - /* We'll mask the thermal vector in the lapic till we're ready: */ - h = THERMAL_APIC_VECTOR | APIC_DM_FIXED | APIC_LVT_MASKED; - apic_write(APIC_LVTTHMR, h); - - rdmsr(MSR_IA32_THERM_INTERRUPT, l, h); - wrmsr(MSR_IA32_THERM_INTERRUPT, - l | (THERM_INT_LOW_ENABLE | THERM_INT_HIGH_ENABLE), h); - - intel_set_thermal_handler(); - - rdmsr(MSR_IA32_MISC_ENABLE, l, h); - wrmsr(MSR_IA32_MISC_ENABLE, l | MSR_IA32_MISC_ENABLE_TM1, h); - - /* Unmask the thermal vector: */ - l = apic_read(APIC_LVTTHMR); - apic_write(APIC_LVTTHMR, l & ~APIC_LVT_MASKED); - - printk(KERN_INFO "CPU%d: Thermal monitoring enabled (%s)\n", - cpu, tm2 ? "TM2" : "TM1"); - - /* enable thermal throttle processing */ - atomic_set(&therm_throt_en, 1); -} diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c index b3792b1..7a508aa 100644 --- a/arch/x86/kernel/cpu/mcheck/therm_throt.c +++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c @@ -16,13 +16,21 @@ #include <linux/interrupt.h> #include <linux/notifier.h> #include <linux/jiffies.h> +#include <linux/kernel.h> #include <linux/percpu.h> #include <linux/sysdev.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/smp.h> #include <linux/cpu.h> #include <asm/therm_throt.h> +#include <asm/processor.h> +#include <asm/system.h> +#include <asm/apic.h> #include <asm/idle.h> #include <asm/mce.h> +#include <asm/msr.h> /* How long to wait between reporting thermal events */ #define CHECK_INTERVAL (300 * HZ) @@ -227,3 +235,61 @@ void intel_set_thermal_handler(void) { smp_thermal_vector = intel_thermal_interrupt; } + +void intel_init_thermal(struct cpuinfo_x86 *c) +{ + unsigned int cpu = smp_processor_id(); + int tm2 = 0; + u32 l, h; + + /* Thermal monitoring depends on ACPI and clock modulation*/ + if (!cpu_has(c, X86_FEATURE_ACPI) || !cpu_has(c, X86_FEATURE_ACC)) + return; + + /* + * First check if its enabled already, in which case there might + * be some SMM goo which handles it, so we can't even put a handler + * since it might be delivered via SMI already: + */ + rdmsr(MSR_IA32_MISC_ENABLE, l, h); + h = apic_read(APIC_LVTTHMR); + if ((l & MSR_IA32_MISC_ENABLE_TM1) && (h & APIC_DM_SMI)) { + printk(KERN_DEBUG + "CPU%d: Thermal monitoring handled by SMI\n", cpu); + return; + } + + if (cpu_has(c, X86_FEATURE_TM2) && (l & MSR_IA32_MISC_ENABLE_TM2)) + tm2 = 1; + + /* Check whether a vector already exists */ + if (h & APIC_VECTOR_MASK) { + printk(KERN_DEBUG + "CPU%d: Thermal LVT vector (%#x) already installed\n", + cpu, (h & APIC_VECTOR_MASK)); + return; + } + + /* We'll mask the thermal vector in the lapic till we're ready: */ + h = THERMAL_APIC_VECTOR | APIC_DM_FIXED | APIC_LVT_MASKED; + apic_write(APIC_LVTTHMR, h); + + rdmsr(MSR_IA32_THERM_INTERRUPT, l, h); + wrmsr(MSR_IA32_THERM_INTERRUPT, + l | (THERM_INT_LOW_ENABLE | THERM_INT_HIGH_ENABLE), h); + + intel_set_thermal_handler(); + + rdmsr(MSR_IA32_MISC_ENABLE, l, h); + wrmsr(MSR_IA32_MISC_ENABLE, l | MSR_IA32_MISC_ENABLE_TM1, h); + + /* Unmask the thermal vector: */ + l = apic_read(APIC_LVTTHMR); + apic_write(APIC_LVTTHMR, l & ~APIC_LVT_MASKED); + + printk(KERN_INFO "CPU%d: Thermal monitoring enabled (%s)\n", + cpu, tm2 ? "TM2" : "TM1"); + + /* enable thermal throttle processing */ + atomic_set(&therm_throt_en, 1); +} -- cgit v1.1 From 8363fc82d36c0886292e33925391dca93f03bd50 Mon Sep 17 00:00:00 2001 From: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Date: Mon, 15 Jun 2009 17:26:36 +0900 Subject: x86, mce: remove intel_set_thermal_handler() and make intel_thermal_interrupt() static. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> --- arch/x86/include/asm/mce.h | 1 - arch/x86/kernel/cpu/mcheck/therm_throt.c | 9 ++------- 2 files changed, 2 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h index 3bc827c..365a594 100644 --- a/arch/x86/include/asm/mce.h +++ b/arch/x86/include/asm/mce.h @@ -199,7 +199,6 @@ extern void (*mce_threshold_vector)(void); * Thermal handler */ -void intel_set_thermal_handler(void); void intel_init_thermal(struct cpuinfo_x86 *c); #ifdef CONFIG_X86_NEW_MCE diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c index 7a508aa..7c7944c 100644 --- a/arch/x86/kernel/cpu/mcheck/therm_throt.c +++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c @@ -202,7 +202,7 @@ device_initcall(thermal_throttle_init_device); #endif /* CONFIG_SYSFS */ /* Thermal transition interrupt handler */ -void intel_thermal_interrupt(void) +static void intel_thermal_interrupt(void) { __u64 msr_val; @@ -231,11 +231,6 @@ asmlinkage void smp_thermal_interrupt(struct pt_regs *regs) ack_APIC_irq(); } -void intel_set_thermal_handler(void) -{ - smp_thermal_vector = intel_thermal_interrupt; -} - void intel_init_thermal(struct cpuinfo_x86 *c) { unsigned int cpu = smp_processor_id(); @@ -278,7 +273,7 @@ void intel_init_thermal(struct cpuinfo_x86 *c) wrmsr(MSR_IA32_THERM_INTERRUPT, l | (THERM_INT_LOW_ENABLE | THERM_INT_HIGH_ENABLE), h); - intel_set_thermal_handler(); + smp_thermal_vector = intel_thermal_interrupt; rdmsr(MSR_IA32_MISC_ENABLE, l, h); wrmsr(MSR_IA32_MISC_ENABLE, l | MSR_IA32_MISC_ENABLE_TM1, h); -- cgit v1.1 From 1149e7264528723b8c3b075a90386ceb2e07070a Mon Sep 17 00:00:00 2001 From: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Date: Mon, 15 Jun 2009 17:27:13 +0900 Subject: x86, mce: remove therm_throt.h Now all symbols in the header are static. Remove the header. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> --- arch/x86/include/asm/therm_throt.h | 9 --------- arch/x86/kernel/cpu/mcheck/mce_intel_64.c | 1 - arch/x86/kernel/cpu/mcheck/p4.c | 1 - arch/x86/kernel/cpu/mcheck/therm_throt.c | 5 ++--- 4 files changed, 2 insertions(+), 14 deletions(-) delete mode 100644 arch/x86/include/asm/therm_throt.h (limited to 'arch') diff --git a/arch/x86/include/asm/therm_throt.h b/arch/x86/include/asm/therm_throt.h deleted file mode 100644 index c62349e..0000000 --- a/arch/x86/include/asm/therm_throt.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef _ASM_X86_THERM_THROT_H -#define _ASM_X86_THERM_THROT_H - -#include <asm/atomic.h> - -extern atomic_t therm_throt_en; -int therm_throt_process(int curr); - -#endif /* _ASM_X86_THERM_THROT_H */ diff --git a/arch/x86/kernel/cpu/mcheck/mce_intel_64.c b/arch/x86/kernel/cpu/mcheck/mce_intel_64.c index 3b7a057..663a88e 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_intel_64.c +++ b/arch/x86/kernel/cpu/mcheck/mce_intel_64.c @@ -11,7 +11,6 @@ #include <asm/processor.h> #include <asm/msr.h> #include <asm/mce.h> -#include <asm/therm_throt.h> /* * Support for Intel Correct Machine Check Interrupts. This allows diff --git a/arch/x86/kernel/cpu/mcheck/p4.c b/arch/x86/kernel/cpu/mcheck/p4.c index 76c5f03..4482aea 100644 --- a/arch/x86/kernel/cpu/mcheck/p4.c +++ b/arch/x86/kernel/cpu/mcheck/p4.c @@ -6,7 +6,6 @@ #include <linux/init.h> #include <linux/smp.h> -#include <asm/therm_throt.h> #include <asm/processor.h> #include <asm/mce.h> #include <asm/msr.h> diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c index 7c7944c..bff8dd1 100644 --- a/arch/x86/kernel/cpu/mcheck/therm_throt.c +++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c @@ -24,7 +24,6 @@ #include <linux/smp.h> #include <linux/cpu.h> -#include <asm/therm_throt.h> #include <asm/processor.h> #include <asm/system.h> #include <asm/apic.h> @@ -38,7 +37,7 @@ static DEFINE_PER_CPU(__u64, next_check) = INITIAL_JIFFIES; static DEFINE_PER_CPU(unsigned long, thermal_throttle_count); -atomic_t therm_throt_en = ATOMIC_INIT(0); +static atomic_t therm_throt_en = ATOMIC_INIT(0); #ifdef CONFIG_SYSFS #define define_therm_throt_sysdev_one_ro(_name) \ @@ -93,7 +92,7 @@ static struct attribute_group thermal_throttle_attr_group = { * 1 : Event should be logged further, and a message has been * printed to the syslog. */ -int therm_throt_process(int curr) +static int therm_throt_process(int curr) { unsigned int cpu = smp_processor_id(); __u64 tmp_jiffs = get_jiffies_64(); -- cgit v1.1 From 58995d2d58e8e555bc92582abe7554921deea3aa Mon Sep 17 00:00:00 2001 From: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Date: Mon, 15 Jun 2009 17:27:47 +0900 Subject: x86, mce: mce.h cleanup Reorder definitions. - static inline dummy mcheck_init() for !CONFIG_X86_MCE - gather defs for exception, threshold handler Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> --- arch/x86/include/asm/mce.h | 29 ++++++++++++++++++----------- 1 file changed, 18 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h index 365a594..5cdd8d1 100644 --- a/arch/x86/include/asm/mce.h +++ b/arch/x86/include/asm/mce.h @@ -109,6 +109,12 @@ struct mce_log { extern int mce_disabled; extern int mce_p5_enabled; +#ifdef CONFIG_X86_MCE +void mcheck_init(struct cpuinfo_x86 *c); +#else +static inline void mcheck_init(struct cpuinfo_x86 *c) {} +#endif + #ifdef CONFIG_X86_OLD_MCE extern int nr_mce_banks; void amd_mcheck_init(struct cpuinfo_x86 *c); @@ -126,13 +132,9 @@ static inline void winchip_mcheck_init(struct cpuinfo_x86 *c) {} static inline void enable_p5_mce(void) {} #endif -/* Call the installed machine check handler for this CPU setup. */ -extern void (*machine_check_vector)(struct pt_regs *, long error_code); - void mce_setup(struct mce *m); void mce_log(struct mce *m); DECLARE_PER_CPU(struct sys_device, mce_dev); -extern void (*threshold_cpu_callback)(unsigned long action, unsigned int cpu); /* * To support more than 128 would need to escape the predefined @@ -169,8 +171,6 @@ DECLARE_PER_CPU(unsigned, mce_poll_count); extern atomic_t mce_entry; -void do_machine_check(struct pt_regs *, long); - typedef DECLARE_BITMAP(mce_banks_t, MAX_NR_BANKS); DECLARE_PER_CPU(mce_banks_t, mce_poll_banks); @@ -187,13 +187,20 @@ void mce_notify_process(void); DECLARE_PER_CPU(struct mce, injectm); extern struct file_operations mce_chrdev_ops; -#ifdef CONFIG_X86_MCE -void mcheck_init(struct cpuinfo_x86 *c); -#else -#define mcheck_init(c) do { } while (0) -#endif +/* + * Exception handler + */ + +/* Call the installed machine check handler for this CPU setup. */ +extern void (*machine_check_vector)(struct pt_regs *, long error_code); +void do_machine_check(struct pt_regs *, long); + +/* + * Threshold handler + */ extern void (*mce_threshold_vector)(void); +extern void (*threshold_cpu_callback)(unsigned long action, unsigned int cpu); /* * Thermal handler -- cgit v1.1 From 1af0815f9639752409a9c15ba6a3dc0f322fd114 Mon Sep 17 00:00:00 2001 From: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Date: Mon, 15 Jun 2009 17:28:38 +0900 Subject: x86, mce: rename _64.c files which are no longer 64-bit-specific Rename files that are no longer 64bit specific: mce_amd_64.c => mce_amd.c mce_intel_64.c => mce_intel.c Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> --- arch/x86/kernel/cpu/mcheck/Makefile | 4 +- arch/x86/kernel/cpu/mcheck/mce_amd.c | 703 ++++++++++++++++++++++++++++++ arch/x86/kernel/cpu/mcheck/mce_amd_64.c | 703 ------------------------------ arch/x86/kernel/cpu/mcheck/mce_intel.c | 225 ++++++++++ arch/x86/kernel/cpu/mcheck/mce_intel_64.c | 225 ---------- 5 files changed, 930 insertions(+), 930 deletions(-) create mode 100644 arch/x86/kernel/cpu/mcheck/mce_amd.c delete mode 100644 arch/x86/kernel/cpu/mcheck/mce_amd_64.c create mode 100644 arch/x86/kernel/cpu/mcheck/mce_intel.c delete mode 100644 arch/x86/kernel/cpu/mcheck/mce_intel_64.c (limited to 'arch') diff --git a/arch/x86/kernel/cpu/mcheck/Makefile b/arch/x86/kernel/cpu/mcheck/Makefile index 659564e..188a1ca 100644 --- a/arch/x86/kernel/cpu/mcheck/Makefile +++ b/arch/x86/kernel/cpu/mcheck/Makefile @@ -3,8 +3,8 @@ obj-y = mce.o obj-$(CONFIG_X86_NEW_MCE) += mce-severity.o obj-$(CONFIG_X86_OLD_MCE) += k7.o p4.o p6.o obj-$(CONFIG_X86_ANCIENT_MCE) += winchip.o p5.o -obj-$(CONFIG_X86_MCE_INTEL) += mce_intel_64.o -obj-$(CONFIG_X86_MCE_AMD) += mce_amd_64.o +obj-$(CONFIG_X86_MCE_INTEL) += mce_intel.o +obj-$(CONFIG_X86_MCE_AMD) += mce_amd.o obj-$(CONFIG_X86_MCE_NONFATAL) += non-fatal.o obj-$(CONFIG_X86_MCE_THRESHOLD) += threshold.o obj-$(CONFIG_X86_MCE_INJECT) += mce-inject.o diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd.c b/arch/x86/kernel/cpu/mcheck/mce_amd.c new file mode 100644 index 0000000..ddae216 --- /dev/null +++ b/arch/x86/kernel/cpu/mcheck/mce_amd.c @@ -0,0 +1,703 @@ +/* + * (c) 2005, 2006 Advanced Micro Devices, Inc. + * Your use of this code is subject to the terms and conditions of the + * GNU general public license version 2. See "COPYING" or + * http://www.gnu.org/licenses/gpl.html + * + * Written by Jacob Shin - AMD, Inc. + * + * Support : jacob.shin@amd.com + * + * April 2006 + * - added support for AMD Family 0x10 processors + * + * All MC4_MISCi registers are shared between multi-cores + */ +#include <linux/interrupt.h> +#include <linux/notifier.h> +#include <linux/kobject.h> +#include <linux/percpu.h> +#include <linux/sysdev.h> +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/sysfs.h> +#include <linux/init.h> +#include <linux/cpu.h> +#include <linux/smp.h> + +#include <asm/apic.h> +#include <asm/idle.h> +#include <asm/mce.h> +#include <asm/msr.h> + +#define PFX "mce_threshold: " +#define VERSION "version 1.1.1" +#define NR_BANKS 6 +#define NR_BLOCKS 9 +#define THRESHOLD_MAX 0xFFF +#define INT_TYPE_APIC 0x00020000 +#define MASK_VALID_HI 0x80000000 +#define MASK_CNTP_HI 0x40000000 +#define MASK_LOCKED_HI 0x20000000 +#define MASK_LVTOFF_HI 0x00F00000 +#define MASK_COUNT_EN_HI 0x00080000 +#define MASK_INT_TYPE_HI 0x00060000 +#define MASK_OVERFLOW_HI 0x00010000 +#define MASK_ERR_COUNT_HI 0x00000FFF +#define MASK_BLKPTR_LO 0xFF000000 +#define MCG_XBLK_ADDR 0xC0000400 + +struct threshold_block { + unsigned int block; + unsigned int bank; + unsigned int cpu; + u32 address; + u16 interrupt_enable; + u16 threshold_limit; + struct kobject kobj; + struct list_head miscj; +}; + +/* defaults used early on boot */ +static struct threshold_block threshold_defaults = { + .interrupt_enable = 0, + .threshold_limit = THRESHOLD_MAX, +}; + +struct threshold_bank { + struct kobject *kobj; + struct threshold_block *blocks; + cpumask_var_t cpus; +}; +static DEFINE_PER_CPU(struct threshold_bank *, threshold_banks[NR_BANKS]); + +#ifdef CONFIG_SMP +static unsigned char shared_bank[NR_BANKS] = { + 0, 0, 0, 0, 1 +}; +#endif + +static DEFINE_PER_CPU(unsigned char, bank_map); /* see which banks are on */ + +static void amd_threshold_interrupt(void); + +/* + * CPU Initialization + */ + +struct thresh_restart { + struct threshold_block *b; + int reset; + u16 old_limit; +}; + +/* must be called with correct cpu affinity */ +/* Called via smp_call_function_single() */ +static void threshold_restart_bank(void *_tr) +{ + struct thresh_restart *tr = _tr; + u32 mci_misc_hi, mci_misc_lo; + + rdmsr(tr->b->address, mci_misc_lo, mci_misc_hi); + + if (tr->b->threshold_limit < (mci_misc_hi & THRESHOLD_MAX)) + tr->reset = 1; /* limit cannot be lower than err count */ + + if (tr->reset) { /* reset err count and overflow bit */ + mci_misc_hi = + (mci_misc_hi & ~(MASK_ERR_COUNT_HI | MASK_OVERFLOW_HI)) | + (THRESHOLD_MAX - tr->b->threshold_limit); + } else if (tr->old_limit) { /* change limit w/o reset */ + int new_count = (mci_misc_hi & THRESHOLD_MAX) + + (tr->old_limit - tr->b->threshold_limit); + + mci_misc_hi = (mci_misc_hi & ~MASK_ERR_COUNT_HI) | + (new_count & THRESHOLD_MAX); + } + + tr->b->interrupt_enable ? + (mci_misc_hi = (mci_misc_hi & ~MASK_INT_TYPE_HI) | INT_TYPE_APIC) : + (mci_misc_hi &= ~MASK_INT_TYPE_HI); + + mci_misc_hi |= MASK_COUNT_EN_HI; + wrmsr(tr->b->address, mci_misc_lo, mci_misc_hi); +} + +/* cpu init entry point, called from mce.c with preempt off */ +void mce_amd_feature_init(struct cpuinfo_x86 *c) +{ + unsigned int cpu = smp_processor_id(); + u32 low = 0, high = 0, address = 0; + unsigned int bank, block; + struct thresh_restart tr; + u8 lvt_off; + + for (bank = 0; bank < NR_BANKS; ++bank) { + for (block = 0; block < NR_BLOCKS; ++block) { + if (block == 0) + address = MSR_IA32_MC0_MISC + bank * 4; + else if (block == 1) { + address = (low & MASK_BLKPTR_LO) >> 21; + if (!address) + break; + address += MCG_XBLK_ADDR; + } else + ++address; + + if (rdmsr_safe(address, &low, &high)) + break; + + if (!(high & MASK_VALID_HI)) { + if (block) + continue; + else + break; + } + + if (!(high & MASK_CNTP_HI) || + (high & MASK_LOCKED_HI)) + continue; + + if (!block) + per_cpu(bank_map, cpu) |= (1 << bank); +#ifdef CONFIG_SMP + if (shared_bank[bank] && c->cpu_core_id) + break; +#endif + lvt_off = setup_APIC_eilvt_mce(THRESHOLD_APIC_VECTOR, + APIC_EILVT_MSG_FIX, 0); + + high &= ~MASK_LVTOFF_HI; + high |= lvt_off << 20; + wrmsr(address, low, high); + + threshold_defaults.address = address; + tr.b = &threshold_defaults; + tr.reset = 0; + tr.old_limit = 0; + threshold_restart_bank(&tr); + + mce_threshold_vector = amd_threshold_interrupt; + } + } +} + +/* + * APIC Interrupt Handler + */ + +/* + * threshold interrupt handler will service THRESHOLD_APIC_VECTOR. + * the interrupt goes off when error_count reaches threshold_limit. + * the handler will simply log mcelog w/ software defined bank number. + */ +static void amd_threshold_interrupt(void) +{ + u32 low = 0, high = 0, address = 0; + unsigned int bank, block; + struct mce m; + + mce_setup(&m); + + /* assume first bank caused it */ + for (bank = 0; bank < NR_BANKS; ++bank) { + if (!(per_cpu(bank_map, m.cpu) & (1 << bank))) + continue; + for (block = 0; block < NR_BLOCKS; ++block) { + if (block == 0) { + address = MSR_IA32_MC0_MISC + bank * 4; + } else if (block == 1) { + address = (low & MASK_BLKPTR_LO) >> 21; + if (!address) + break; + address += MCG_XBLK_ADDR; + } else { + ++address; + } + + if (rdmsr_safe(address, &low, &high)) + break; + + if (!(high & MASK_VALID_HI)) { + if (block) + continue; + else + break; + } + + if (!(high & MASK_CNTP_HI) || + (high & MASK_LOCKED_HI)) + continue; + + /* + * Log the machine check that caused the threshold + * event. + */ + machine_check_poll(MCP_TIMESTAMP, + &__get_cpu_var(mce_poll_banks)); + + if (high & MASK_OVERFLOW_HI) { + rdmsrl(address, m.misc); + rdmsrl(MSR_IA32_MC0_STATUS + bank * 4, + m.status); + m.bank = K8_MCE_THRESHOLD_BASE + + bank * NR_BLOCKS + + block; + mce_log(&m); + return; + } + } + } +} + +/* + * Sysfs Interface + */ + +struct threshold_attr { + struct attribute attr; + ssize_t (*show) (struct threshold_block *, char *); + ssize_t (*store) (struct threshold_block *, const char *, size_t count); +}; + +#define SHOW_FIELDS(name) \ +static ssize_t show_ ## name(struct threshold_block *b, char *buf) \ +{ \ + return sprintf(buf, "%lx\n", (unsigned long) b->name); \ +} +SHOW_FIELDS(interrupt_enable) +SHOW_FIELDS(threshold_limit) + +static ssize_t +store_interrupt_enable(struct threshold_block *b, const char *buf, size_t size) +{ + struct thresh_restart tr; + unsigned long new; + + if (strict_strtoul(buf, 0, &new) < 0) + return -EINVAL; + + b->interrupt_enable = !!new; + + tr.b = b; + tr.reset = 0; + tr.old_limit = 0; + + smp_call_function_single(b->cpu, threshold_restart_bank, &tr, 1); + + return size; +} + +static ssize_t +store_threshold_limit(struct threshold_block *b, const char *buf, size_t size) +{ + struct thresh_restart tr; + unsigned long new; + + if (strict_strtoul(buf, 0, &new) < 0) + return -EINVAL; + + if (new > THRESHOLD_MAX) + new = THRESHOLD_MAX; + if (new < 1) + new = 1; + + tr.old_limit = b->threshold_limit; + b->threshold_limit = new; + tr.b = b; + tr.reset = 0; + + smp_call_function_single(b->cpu, threshold_restart_bank, &tr, 1); + + return size; +} + +struct threshold_block_cross_cpu { + struct threshold_block *tb; + long retval; +}; + +static void local_error_count_handler(void *_tbcc) +{ + struct threshold_block_cross_cpu *tbcc = _tbcc; + struct threshold_block *b = tbcc->tb; + u32 low, high; + + rdmsr(b->address, low, high); + tbcc->retval = (high & 0xFFF) - (THRESHOLD_MAX - b->threshold_limit); +} + +static ssize_t show_error_count(struct threshold_block *b, char *buf) +{ + struct threshold_block_cross_cpu tbcc = { .tb = b, }; + + smp_call_function_single(b->cpu, local_error_count_handler, &tbcc, 1); + return sprintf(buf, "%lx\n", tbcc.retval); +} + +static ssize_t store_error_count(struct threshold_block *b, + const char *buf, size_t count) +{ + struct thresh_restart tr = { .b = b, .reset = 1, .old_limit = 0 }; + + smp_call_function_single(b->cpu, threshold_restart_bank, &tr, 1); + return 1; +} + +#define RW_ATTR(val) \ +static struct threshold_attr val = { \ + .attr = {.name = __stringify(val), .mode = 0644 }, \ + .show = show_## val, \ + .store = store_## val, \ +}; + +RW_ATTR(interrupt_enable); +RW_ATTR(threshold_limit); +RW_ATTR(error_count); + +static struct attribute *default_attrs[] = { + &interrupt_enable.attr, + &threshold_limit.attr, + &error_count.attr, + NULL +}; + +#define to_block(k) container_of(k, struct threshold_block, kobj) +#define to_attr(a) container_of(a, struct threshold_attr, attr) + +static ssize_t show(struct kobject *kobj, struct attribute *attr, char *buf) +{ + struct threshold_block *b = to_block(kobj); + struct threshold_attr *a = to_attr(attr); + ssize_t ret; + + ret = a->show ? a->show(b, buf) : -EIO; + + return ret; +} + +static ssize_t store(struct kobject *kobj, struct attribute *attr, + const char *buf, size_t count) +{ + struct threshold_block *b = to_block(kobj); + struct threshold_attr *a = to_attr(attr); + ssize_t ret; + + ret = a->store ? a->store(b, buf, count) : -EIO; + + return ret; +} + +static struct sysfs_ops threshold_ops = { + .show = show, + .store = store, +}; + +static struct kobj_type threshold_ktype = { + .sysfs_ops = &threshold_ops, + .default_attrs = default_attrs, +}; + +static __cpuinit int allocate_threshold_blocks(unsigned int cpu, + unsigned int bank, + unsigned int block, + u32 address) +{ + struct threshold_block *b = NULL; + u32 low, high; + int err; + + if ((bank >= NR_BANKS) || (block >= NR_BLOCKS)) + return 0; + + if (rdmsr_safe_on_cpu(cpu, address, &low, &high)) + return 0; + + if (!(high & MASK_VALID_HI)) { + if (block) + goto recurse; + else + return 0; + } + + if (!(high & MASK_CNTP_HI) || + (high & MASK_LOCKED_HI)) + goto recurse; + + b = kzalloc(sizeof(struct threshold_block), GFP_KERNEL); + if (!b) + return -ENOMEM; + + b->block = block; + b->bank = bank; + b->cpu = cpu; + b->address = address; + b->interrupt_enable = 0; + b->threshold_limit = THRESHOLD_MAX; + + INIT_LIST_HEAD(&b->miscj); + + if (per_cpu(threshold_banks, cpu)[bank]->blocks) { + list_add(&b->miscj, + &per_cpu(threshold_banks, cpu)[bank]->blocks->miscj); + } else { + per_cpu(threshold_banks, cpu)[bank]->blocks = b; + } + + err = kobject_init_and_add(&b->kobj, &threshold_ktype, + per_cpu(threshold_banks, cpu)[bank]->kobj, + "misc%i", block); + if (err) + goto out_free; +recurse: + if (!block) { + address = (low & MASK_BLKPTR_LO) >> 21; + if (!address) + return 0; + address += MCG_XBLK_ADDR; + } else { + ++address; + } + + err = allocate_threshold_blocks(cpu, bank, ++block, address); + if (err) + goto out_free; + + if (b) + kobject_uevent(&b->kobj, KOBJ_ADD); + + return err; + +out_free: + if (b) { + kobject_put(&b->kobj); + kfree(b); + } + return err; +} + +static __cpuinit long +local_allocate_threshold_blocks(int cpu, unsigned int bank) +{ + return allocate_threshold_blocks(cpu, bank, 0, + MSR_IA32_MC0_MISC + bank * 4); +} + +/* symlinks sibling shared banks to first core. first core owns dir/files. */ +static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank) +{ + int i, err = 0; + struct threshold_bank *b = NULL; + char name[32]; + + sprintf(name, "threshold_bank%i", bank); + +#ifdef CONFIG_SMP + if (cpu_data(cpu).cpu_core_id && shared_bank[bank]) { /* symlink */ + i = cpumask_first(cpu_core_mask(cpu)); + + /* first core not up yet */ + if (cpu_data(i).cpu_core_id) + goto out; + + /* already linked */ + if (per_cpu(threshold_banks, cpu)[bank]) + goto out; + + b = per_cpu(threshold_banks, i)[bank]; + + if (!b) + goto out; + + err = sysfs_create_link(&per_cpu(mce_dev, cpu).kobj, + b->kobj, name); + if (err) + goto out; + + cpumask_copy(b->cpus, cpu_core_mask(cpu)); + per_cpu(threshold_banks, cpu)[bank] = b; + + goto out; + } +#endif + + b = kzalloc(sizeof(struct threshold_bank), GFP_KERNEL); + if (!b) { + err = -ENOMEM; + goto out; + } + if (!alloc_cpumask_var(&b->cpus, GFP_KERNEL)) { + kfree(b); + err = -ENOMEM; + goto out; + } + + b->kobj = kobject_create_and_add(name, &per_cpu(mce_dev, cpu).kobj); + if (!b->kobj) + goto out_free; + +#ifndef CONFIG_SMP + cpumask_setall(b->cpus); +#else + cpumask_copy(b->cpus, cpu_core_mask(cpu)); +#endif + + per_cpu(threshold_banks, cpu)[bank] = b; + + err = local_allocate_threshold_blocks(cpu, bank); + if (err) + goto out_free; + + for_each_cpu(i, b->cpus) { + if (i == cpu) + continue; + + err = sysfs_create_link(&per_cpu(mce_dev, i).kobj, + b->kobj, name); + if (err) + goto out; + + per_cpu(threshold_banks, i)[bank] = b; + } + + goto out; + +out_free: + per_cpu(threshold_banks, cpu)[bank] = NULL; + free_cpumask_var(b->cpus); + kfree(b); +out: + return err; +} + +/* create dir/files for all valid threshold banks */ +static __cpuinit int threshold_create_device(unsigned int cpu) +{ + unsigned int bank; + int err = 0; + + for (bank = 0; bank < NR_BANKS; ++bank) { + if (!(per_cpu(bank_map, cpu) & (1 << bank))) + continue; + err = threshold_create_bank(cpu, bank); + if (err) + goto out; + } +out: + return err; +} + +/* + * let's be hotplug friendly. + * in case of multiple core processors, the first core always takes ownership + * of shared sysfs dir/files, and rest of the cores will be symlinked to it. + */ + +static void deallocate_threshold_block(unsigned int cpu, + unsigned int bank) +{ + struct threshold_block *pos = NULL; + struct threshold_block *tmp = NULL; + struct threshold_bank *head = per_cpu(threshold_banks, cpu)[bank]; + + if (!head) + return; + + list_for_each_entry_safe(pos, tmp, &head->blocks->miscj, miscj) { + kobject_put(&pos->kobj); + list_del(&pos->miscj); + kfree(pos); + } + + kfree(per_cpu(threshold_banks, cpu)[bank]->blocks); + per_cpu(threshold_banks, cpu)[bank]->blocks = NULL; +} + +static void threshold_remove_bank(unsigned int cpu, int bank) +{ + struct threshold_bank *b; + char name[32]; + int i = 0; + + b = per_cpu(threshold_banks, cpu)[bank]; + if (!b) + return; + if (!b->blocks) + goto free_out; + + sprintf(name, "threshold_bank%i", bank); + +#ifdef CONFIG_SMP + /* sibling symlink */ + if (shared_bank[bank] && b->blocks->cpu != cpu) { + sysfs_remove_link(&per_cpu(mce_dev, cpu).kobj, name); + per_cpu(threshold_banks, cpu)[bank] = NULL; + + return; + } +#endif + + /* remove all sibling symlinks before unregistering */ + for_each_cpu(i, b->cpus) { + if (i == cpu) + continue; + + sysfs_remove_link(&per_cpu(mce_dev, i).kobj, name); + per_cpu(threshold_banks, i)[bank] = NULL; + } + + deallocate_threshold_block(cpu, bank); + +free_out: + kobject_del(b->kobj); + kobject_put(b->kobj); + free_cpumask_var(b->cpus); + kfree(b); + per_cpu(threshold_banks, cpu)[bank] = NULL; +} + +static void threshold_remove_device(unsigned int cpu) +{ + unsigned int bank; + + for (bank = 0; bank < NR_BANKS; ++bank) { + if (!(per_cpu(bank_map, cpu) & (1 << bank))) + continue; + threshold_remove_bank(cpu, bank); + } +} + +/* get notified when a cpu comes on/off */ +static void __cpuinit +amd_64_threshold_cpu_callback(unsigned long action, unsigned int cpu) +{ + switch (action) { + case CPU_ONLINE: + case CPU_ONLINE_FROZEN: + threshold_create_device(cpu); + break; + case CPU_DEAD: + case CPU_DEAD_FROZEN: + threshold_remove_device(cpu); + break; + default: + break; + } +} + +static __init int threshold_init_device(void) +{ + unsigned lcpu = 0; + + /* to hit CPUs online before the notifier is up */ + for_each_online_cpu(lcpu) { + int err = threshold_create_device(lcpu); + + if (err) + return err; + } + threshold_cpu_callback = amd_64_threshold_cpu_callback; + + return 0; +} +device_initcall(threshold_init_device); diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd_64.c b/arch/x86/kernel/cpu/mcheck/mce_amd_64.c deleted file mode 100644 index ddae216..0000000 --- a/arch/x86/kernel/cpu/mcheck/mce_amd_64.c +++ /dev/null @@ -1,703 +0,0 @@ -/* - * (c) 2005, 2006 Advanced Micro Devices, Inc. - * Your use of this code is subject to the terms and conditions of the - * GNU general public license version 2. See "COPYING" or - * http://www.gnu.org/licenses/gpl.html - * - * Written by Jacob Shin - AMD, Inc. - * - * Support : jacob.shin@amd.com - * - * April 2006 - * - added support for AMD Family 0x10 processors - * - * All MC4_MISCi registers are shared between multi-cores - */ -#include <linux/interrupt.h> -#include <linux/notifier.h> -#include <linux/kobject.h> -#include <linux/percpu.h> -#include <linux/sysdev.h> -#include <linux/errno.h> -#include <linux/sched.h> -#include <linux/sysfs.h> -#include <linux/init.h> -#include <linux/cpu.h> -#include <linux/smp.h> - -#include <asm/apic.h> -#include <asm/idle.h> -#include <asm/mce.h> -#include <asm/msr.h> - -#define PFX "mce_threshold: " -#define VERSION "version 1.1.1" -#define NR_BANKS 6 -#define NR_BLOCKS 9 -#define THRESHOLD_MAX 0xFFF -#define INT_TYPE_APIC 0x00020000 -#define MASK_VALID_HI 0x80000000 -#define MASK_CNTP_HI 0x40000000 -#define MASK_LOCKED_HI 0x20000000 -#define MASK_LVTOFF_HI 0x00F00000 -#define MASK_COUNT_EN_HI 0x00080000 -#define MASK_INT_TYPE_HI 0x00060000 -#define MASK_OVERFLOW_HI 0x00010000 -#define MASK_ERR_COUNT_HI 0x00000FFF -#define MASK_BLKPTR_LO 0xFF000000 -#define MCG_XBLK_ADDR 0xC0000400 - -struct threshold_block { - unsigned int block; - unsigned int bank; - unsigned int cpu; - u32 address; - u16 interrupt_enable; - u16 threshold_limit; - struct kobject kobj; - struct list_head miscj; -}; - -/* defaults used early on boot */ -static struct threshold_block threshold_defaults = { - .interrupt_enable = 0, - .threshold_limit = THRESHOLD_MAX, -}; - -struct threshold_bank { - struct kobject *kobj; - struct threshold_block *blocks; - cpumask_var_t cpus; -}; -static DEFINE_PER_CPU(struct threshold_bank *, threshold_banks[NR_BANKS]); - -#ifdef CONFIG_SMP -static unsigned char shared_bank[NR_BANKS] = { - 0, 0, 0, 0, 1 -}; -#endif - -static DEFINE_PER_CPU(unsigned char, bank_map); /* see which banks are on */ - -static void amd_threshold_interrupt(void); - -/* - * CPU Initialization - */ - -struct thresh_restart { - struct threshold_block *b; - int reset; - u16 old_limit; -}; - -/* must be called with correct cpu affinity */ -/* Called via smp_call_function_single() */ -static void threshold_restart_bank(void *_tr) -{ - struct thresh_restart *tr = _tr; - u32 mci_misc_hi, mci_misc_lo; - - rdmsr(tr->b->address, mci_misc_lo, mci_misc_hi); - - if (tr->b->threshold_limit < (mci_misc_hi & THRESHOLD_MAX)) - tr->reset = 1; /* limit cannot be lower than err count */ - - if (tr->reset) { /* reset err count and overflow bit */ - mci_misc_hi = - (mci_misc_hi & ~(MASK_ERR_COUNT_HI | MASK_OVERFLOW_HI)) | - (THRESHOLD_MAX - tr->b->threshold_limit); - } else if (tr->old_limit) { /* change limit w/o reset */ - int new_count = (mci_misc_hi & THRESHOLD_MAX) + - (tr->old_limit - tr->b->threshold_limit); - - mci_misc_hi = (mci_misc_hi & ~MASK_ERR_COUNT_HI) | - (new_count & THRESHOLD_MAX); - } - - tr->b->interrupt_enable ? - (mci_misc_hi = (mci_misc_hi & ~MASK_INT_TYPE_HI) | INT_TYPE_APIC) : - (mci_misc_hi &= ~MASK_INT_TYPE_HI); - - mci_misc_hi |= MASK_COUNT_EN_HI; - wrmsr(tr->b->address, mci_misc_lo, mci_misc_hi); -} - -/* cpu init entry point, called from mce.c with preempt off */ -void mce_amd_feature_init(struct cpuinfo_x86 *c) -{ - unsigned int cpu = smp_processor_id(); - u32 low = 0, high = 0, address = 0; - unsigned int bank, block; - struct thresh_restart tr; - u8 lvt_off; - - for (bank = 0; bank < NR_BANKS; ++bank) { - for (block = 0; block < NR_BLOCKS; ++block) { - if (block == 0) - address = MSR_IA32_MC0_MISC + bank * 4; - else if (block == 1) { - address = (low & MASK_BLKPTR_LO) >> 21; - if (!address) - break; - address += MCG_XBLK_ADDR; - } else - ++address; - - if (rdmsr_safe(address, &low, &high)) - break; - - if (!(high & MASK_VALID_HI)) { - if (block) - continue; - else - break; - } - - if (!(high & MASK_CNTP_HI) || - (high & MASK_LOCKED_HI)) - continue; - - if (!block) - per_cpu(bank_map, cpu) |= (1 << bank); -#ifdef CONFIG_SMP - if (shared_bank[bank] && c->cpu_core_id) - break; -#endif - lvt_off = setup_APIC_eilvt_mce(THRESHOLD_APIC_VECTOR, - APIC_EILVT_MSG_FIX, 0); - - high &= ~MASK_LVTOFF_HI; - high |= lvt_off << 20; - wrmsr(address, low, high); - - threshold_defaults.address = address; - tr.b = &threshold_defaults; - tr.reset = 0; - tr.old_limit = 0; - threshold_restart_bank(&tr); - - mce_threshold_vector = amd_threshold_interrupt; - } - } -} - -/* - * APIC Interrupt Handler - */ - -/* - * threshold interrupt handler will service THRESHOLD_APIC_VECTOR. - * the interrupt goes off when error_count reaches threshold_limit. - * the handler will simply log mcelog w/ software defined bank number. - */ -static void amd_threshold_interrupt(void) -{ - u32 low = 0, high = 0, address = 0; - unsigned int bank, block; - struct mce m; - - mce_setup(&m); - - /* assume first bank caused it */ - for (bank = 0; bank < NR_BANKS; ++bank) { - if (!(per_cpu(bank_map, m.cpu) & (1 << bank))) - continue; - for (block = 0; block < NR_BLOCKS; ++block) { - if (block == 0) { - address = MSR_IA32_MC0_MISC + bank * 4; - } else if (block == 1) { - address = (low & MASK_BLKPTR_LO) >> 21; - if (!address) - break; - address += MCG_XBLK_ADDR; - } else { - ++address; - } - - if (rdmsr_safe(address, &low, &high)) - break; - - if (!(high & MASK_VALID_HI)) { - if (block) - continue; - else - break; - } - - if (!(high & MASK_CNTP_HI) || - (high & MASK_LOCKED_HI)) - continue; - - /* - * Log the machine check that caused the threshold - * event. - */ - machine_check_poll(MCP_TIMESTAMP, - &__get_cpu_var(mce_poll_banks)); - - if (high & MASK_OVERFLOW_HI) { - rdmsrl(address, m.misc); - rdmsrl(MSR_IA32_MC0_STATUS + bank * 4, - m.status); - m.bank = K8_MCE_THRESHOLD_BASE - + bank * NR_BLOCKS - + block; - mce_log(&m); - return; - } - } - } -} - -/* - * Sysfs Interface - */ - -struct threshold_attr { - struct attribute attr; - ssize_t (*show) (struct threshold_block *, char *); - ssize_t (*store) (struct threshold_block *, const char *, size_t count); -}; - -#define SHOW_FIELDS(name) \ -static ssize_t show_ ## name(struct threshold_block *b, char *buf) \ -{ \ - return sprintf(buf, "%lx\n", (unsigned long) b->name); \ -} -SHOW_FIELDS(interrupt_enable) -SHOW_FIELDS(threshold_limit) - -static ssize_t -store_interrupt_enable(struct threshold_block *b, const char *buf, size_t size) -{ - struct thresh_restart tr; - unsigned long new; - - if (strict_strtoul(buf, 0, &new) < 0) - return -EINVAL; - - b->interrupt_enable = !!new; - - tr.b = b; - tr.reset = 0; - tr.old_limit = 0; - - smp_call_function_single(b->cpu, threshold_restart_bank, &tr, 1); - - return size; -} - -static ssize_t -store_threshold_limit(struct threshold_block *b, const char *buf, size_t size) -{ - struct thresh_restart tr; - unsigned long new; - - if (strict_strtoul(buf, 0, &new) < 0) - return -EINVAL; - - if (new > THRESHOLD_MAX) - new = THRESHOLD_MAX; - if (new < 1) - new = 1; - - tr.old_limit = b->threshold_limit; - b->threshold_limit = new; - tr.b = b; - tr.reset = 0; - - smp_call_function_single(b->cpu, threshold_restart_bank, &tr, 1); - - return size; -} - -struct threshold_block_cross_cpu { - struct threshold_block *tb; - long retval; -}; - -static void local_error_count_handler(void *_tbcc) -{ - struct threshold_block_cross_cpu *tbcc = _tbcc; - struct threshold_block *b = tbcc->tb; - u32 low, high; - - rdmsr(b->address, low, high); - tbcc->retval = (high & 0xFFF) - (THRESHOLD_MAX - b->threshold_limit); -} - -static ssize_t show_error_count(struct threshold_block *b, char *buf) -{ - struct threshold_block_cross_cpu tbcc = { .tb = b, }; - - smp_call_function_single(b->cpu, local_error_count_handler, &tbcc, 1); - return sprintf(buf, "%lx\n", tbcc.retval); -} - -static ssize_t store_error_count(struct threshold_block *b, - const char *buf, size_t count) -{ - struct thresh_restart tr = { .b = b, .reset = 1, .old_limit = 0 }; - - smp_call_function_single(b->cpu, threshold_restart_bank, &tr, 1); - return 1; -} - -#define RW_ATTR(val) \ -static struct threshold_attr val = { \ - .attr = {.name = __stringify(val), .mode = 0644 }, \ - .show = show_## val, \ - .store = store_## val, \ -}; - -RW_ATTR(interrupt_enable); -RW_ATTR(threshold_limit); -RW_ATTR(error_count); - -static struct attribute *default_attrs[] = { - &interrupt_enable.attr, - &threshold_limit.attr, - &error_count.attr, - NULL -}; - -#define to_block(k) container_of(k, struct threshold_block, kobj) -#define to_attr(a) container_of(a, struct threshold_attr, attr) - -static ssize_t show(struct kobject *kobj, struct attribute *attr, char *buf) -{ - struct threshold_block *b = to_block(kobj); - struct threshold_attr *a = to_attr(attr); - ssize_t ret; - - ret = a->show ? a->show(b, buf) : -EIO; - - return ret; -} - -static ssize_t store(struct kobject *kobj, struct attribute *attr, - const char *buf, size_t count) -{ - struct threshold_block *b = to_block(kobj); - struct threshold_attr *a = to_attr(attr); - ssize_t ret; - - ret = a->store ? a->store(b, buf, count) : -EIO; - - return ret; -} - -static struct sysfs_ops threshold_ops = { - .show = show, - .store = store, -}; - -static struct kobj_type threshold_ktype = { - .sysfs_ops = &threshold_ops, - .default_attrs = default_attrs, -}; - -static __cpuinit int allocate_threshold_blocks(unsigned int cpu, - unsigned int bank, - unsigned int block, - u32 address) -{ - struct threshold_block *b = NULL; - u32 low, high; - int err; - - if ((bank >= NR_BANKS) || (block >= NR_BLOCKS)) - return 0; - - if (rdmsr_safe_on_cpu(cpu, address, &low, &high)) - return 0; - - if (!(high & MASK_VALID_HI)) { - if (block) - goto recurse; - else - return 0; - } - - if (!(high & MASK_CNTP_HI) || - (high & MASK_LOCKED_HI)) - goto recurse; - - b = kzalloc(sizeof(struct threshold_block), GFP_KERNEL); - if (!b) - return -ENOMEM; - - b->block = block; - b->bank = bank; - b->cpu = cpu; - b->address = address; - b->interrupt_enable = 0; - b->threshold_limit = THRESHOLD_MAX; - - INIT_LIST_HEAD(&b->miscj); - - if (per_cpu(threshold_banks, cpu)[bank]->blocks) { - list_add(&b->miscj, - &per_cpu(threshold_banks, cpu)[bank]->blocks->miscj); - } else { - per_cpu(threshold_banks, cpu)[bank]->blocks = b; - } - - err = kobject_init_and_add(&b->kobj, &threshold_ktype, - per_cpu(threshold_banks, cpu)[bank]->kobj, - "misc%i", block); - if (err) - goto out_free; -recurse: - if (!block) { - address = (low & MASK_BLKPTR_LO) >> 21; - if (!address) - return 0; - address += MCG_XBLK_ADDR; - } else { - ++address; - } - - err = allocate_threshold_blocks(cpu, bank, ++block, address); - if (err) - goto out_free; - - if (b) - kobject_uevent(&b->kobj, KOBJ_ADD); - - return err; - -out_free: - if (b) { - kobject_put(&b->kobj); - kfree(b); - } - return err; -} - -static __cpuinit long -local_allocate_threshold_blocks(int cpu, unsigned int bank) -{ - return allocate_threshold_blocks(cpu, bank, 0, - MSR_IA32_MC0_MISC + bank * 4); -} - -/* symlinks sibling shared banks to first core. first core owns dir/files. */ -static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank) -{ - int i, err = 0; - struct threshold_bank *b = NULL; - char name[32]; - - sprintf(name, "threshold_bank%i", bank); - -#ifdef CONFIG_SMP - if (cpu_data(cpu).cpu_core_id && shared_bank[bank]) { /* symlink */ - i = cpumask_first(cpu_core_mask(cpu)); - - /* first core not up yet */ - if (cpu_data(i).cpu_core_id) - goto out; - - /* already linked */ - if (per_cpu(threshold_banks, cpu)[bank]) - goto out; - - b = per_cpu(threshold_banks, i)[bank]; - - if (!b) - goto out; - - err = sysfs_create_link(&per_cpu(mce_dev, cpu).kobj, - b->kobj, name); - if (err) - goto out; - - cpumask_copy(b->cpus, cpu_core_mask(cpu)); - per_cpu(threshold_banks, cpu)[bank] = b; - - goto out; - } -#endif - - b = kzalloc(sizeof(struct threshold_bank), GFP_KERNEL); - if (!b) { - err = -ENOMEM; - goto out; - } - if (!alloc_cpumask_var(&b->cpus, GFP_KERNEL)) { - kfree(b); - err = -ENOMEM; - goto out; - } - - b->kobj = kobject_create_and_add(name, &per_cpu(mce_dev, cpu).kobj); - if (!b->kobj) - goto out_free; - -#ifndef CONFIG_SMP - cpumask_setall(b->cpus); -#else - cpumask_copy(b->cpus, cpu_core_mask(cpu)); -#endif - - per_cpu(threshold_banks, cpu)[bank] = b; - - err = local_allocate_threshold_blocks(cpu, bank); - if (err) - goto out_free; - - for_each_cpu(i, b->cpus) { - if (i == cpu) - continue; - - err = sysfs_create_link(&per_cpu(mce_dev, i).kobj, - b->kobj, name); - if (err) - goto out; - - per_cpu(threshold_banks, i)[bank] = b; - } - - goto out; - -out_free: - per_cpu(threshold_banks, cpu)[bank] = NULL; - free_cpumask_var(b->cpus); - kfree(b); -out: - return err; -} - -/* create dir/files for all valid threshold banks */ -static __cpuinit int threshold_create_device(unsigned int cpu) -{ - unsigned int bank; - int err = 0; - - for (bank = 0; bank < NR_BANKS; ++bank) { - if (!(per_cpu(bank_map, cpu) & (1 << bank))) - continue; - err = threshold_create_bank(cpu, bank); - if (err) - goto out; - } -out: - return err; -} - -/* - * let's be hotplug friendly. - * in case of multiple core processors, the first core always takes ownership - * of shared sysfs dir/files, and rest of the cores will be symlinked to it. - */ - -static void deallocate_threshold_block(unsigned int cpu, - unsigned int bank) -{ - struct threshold_block *pos = NULL; - struct threshold_block *tmp = NULL; - struct threshold_bank *head = per_cpu(threshold_banks, cpu)[bank]; - - if (!head) - return; - - list_for_each_entry_safe(pos, tmp, &head->blocks->miscj, miscj) { - kobject_put(&pos->kobj); - list_del(&pos->miscj); - kfree(pos); - } - - kfree(per_cpu(threshold_banks, cpu)[bank]->blocks); - per_cpu(threshold_banks, cpu)[bank]->blocks = NULL; -} - -static void threshold_remove_bank(unsigned int cpu, int bank) -{ - struct threshold_bank *b; - char name[32]; - int i = 0; - - b = per_cpu(threshold_banks, cpu)[bank]; - if (!b) - return; - if (!b->blocks) - goto free_out; - - sprintf(name, "threshold_bank%i", bank); - -#ifdef CONFIG_SMP - /* sibling symlink */ - if (shared_bank[bank] && b->blocks->cpu != cpu) { - sysfs_remove_link(&per_cpu(mce_dev, cpu).kobj, name); - per_cpu(threshold_banks, cpu)[bank] = NULL; - - return; - } -#endif - - /* remove all sibling symlinks before unregistering */ - for_each_cpu(i, b->cpus) { - if (i == cpu) - continue; - - sysfs_remove_link(&per_cpu(mce_dev, i).kobj, name); - per_cpu(threshold_banks, i)[bank] = NULL; - } - - deallocate_threshold_block(cpu, bank); - -free_out: - kobject_del(b->kobj); - kobject_put(b->kobj); - free_cpumask_var(b->cpus); - kfree(b); - per_cpu(threshold_banks, cpu)[bank] = NULL; -} - -static void threshold_remove_device(unsigned int cpu) -{ - unsigned int bank; - - for (bank = 0; bank < NR_BANKS; ++bank) { - if (!(per_cpu(bank_map, cpu) & (1 << bank))) - continue; - threshold_remove_bank(cpu, bank); - } -} - -/* get notified when a cpu comes on/off */ -static void __cpuinit -amd_64_threshold_cpu_callback(unsigned long action, unsigned int cpu) -{ - switch (action) { - case CPU_ONLINE: - case CPU_ONLINE_FROZEN: - threshold_create_device(cpu); - break; - case CPU_DEAD: - case CPU_DEAD_FROZEN: - threshold_remove_device(cpu); - break; - default: - break; - } -} - -static __init int threshold_init_device(void) -{ - unsigned lcpu = 0; - - /* to hit CPUs online before the notifier is up */ - for_each_online_cpu(lcpu) { - int err = threshold_create_device(lcpu); - - if (err) - return err; - } - threshold_cpu_callback = amd_64_threshold_cpu_callback; - - return 0; -} -device_initcall(threshold_init_device); diff --git a/arch/x86/kernel/cpu/mcheck/mce_intel.c b/arch/x86/kernel/cpu/mcheck/mce_intel.c new file mode 100644 index 0000000..663a88e --- /dev/null +++ b/arch/x86/kernel/cpu/mcheck/mce_intel.c @@ -0,0 +1,225 @@ +/* + * Intel specific MCE features. + * Copyright 2004 Zwane Mwaikambo <zwane@linuxpower.ca> + * Copyright (C) 2008, 2009 Intel Corporation + * Author: Andi Kleen + */ + +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/percpu.h> +#include <asm/processor.h> +#include <asm/msr.h> +#include <asm/mce.h> + +/* + * Support for Intel Correct Machine Check Interrupts. This allows + * the CPU to raise an interrupt when a corrected machine check happened. + * Normally we pick those up using a regular polling timer. + * Also supports reliable discovery of shared banks. + */ + +static DEFINE_PER_CPU(mce_banks_t, mce_banks_owned); + +/* + * cmci_discover_lock protects against parallel discovery attempts + * which could race against each other. + */ +static DEFINE_SPINLOCK(cmci_discover_lock); + +#define CMCI_THRESHOLD 1 + +static int cmci_supported(int *banks) +{ + u64 cap; + + if (mce_cmci_disabled || mce_ignore_ce) + return 0; + + /* + * Vendor check is not strictly needed, but the initial + * initialization is vendor keyed and this + * makes sure none of the backdoors are entered otherwise. + */ + if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL) + return 0; + if (!cpu_has_apic || lapic_get_maxlvt() < 6) + return 0; + rdmsrl(MSR_IA32_MCG_CAP, cap); + *banks = min_t(unsigned, MAX_NR_BANKS, cap & 0xff); + return !!(cap & MCG_CMCI_P); +} + +/* + * The interrupt handler. This is called on every event. + * Just call the poller directly to log any events. + * This could in theory increase the threshold under high load, + * but doesn't for now. + */ +static void intel_threshold_interrupt(void) +{ + machine_check_poll(MCP_TIMESTAMP, &__get_cpu_var(mce_banks_owned)); + mce_notify_irq(); +} + +static void print_update(char *type, int *hdr, int num) +{ + if (*hdr == 0) + printk(KERN_INFO "CPU %d MCA banks", smp_processor_id()); + *hdr = 1; + printk(KERN_CONT " %s:%d", type, num); +} + +/* + * Enable CMCI (Corrected Machine Check Interrupt) for available MCE banks + * on this CPU. Use the algorithm recommended in the SDM to discover shared + * banks. + */ +static void cmci_discover(int banks, int boot) +{ + unsigned long *owned = (void *)&__get_cpu_var(mce_banks_owned); + unsigned long flags; + int hdr = 0; + int i; + + spin_lock_irqsave(&cmci_discover_lock, flags); + for (i = 0; i < banks; i++) { + u64 val; + + if (test_bit(i, owned)) + continue; + + rdmsrl(MSR_IA32_MC0_CTL2 + i, val); + + /* Already owned by someone else? */ + if (val & CMCI_EN) { + if (test_and_clear_bit(i, owned) || boot) + print_update("SHD", &hdr, i); + __clear_bit(i, __get_cpu_var(mce_poll_banks)); + continue; + } + + val |= CMCI_EN | CMCI_THRESHOLD; + wrmsrl(MSR_IA32_MC0_CTL2 + i, val); + rdmsrl(MSR_IA32_MC0_CTL2 + i, val); + + /* Did the enable bit stick? -- the bank supports CMCI */ + if (val & CMCI_EN) { + if (!test_and_set_bit(i, owned) || boot) + print_update("CMCI", &hdr, i); + __clear_bit(i, __get_cpu_var(mce_poll_banks)); + } else { + WARN_ON(!test_bit(i, __get_cpu_var(mce_poll_banks))); + } + } + spin_unlock_irqrestore(&cmci_discover_lock, flags); + if (hdr) + printk(KERN_CONT "\n"); +} + +/* + * Just in case we missed an event during initialization check + * all the CMCI owned banks. + */ +void cmci_recheck(void) +{ + unsigned long flags; + int banks; + + if (!mce_available(¤t_cpu_data) || !cmci_supported(&banks)) + return; + local_irq_save(flags); + machine_check_poll(MCP_TIMESTAMP, &__get_cpu_var(mce_banks_owned)); + local_irq_restore(flags); +} + +/* + * Disable CMCI on this CPU for all banks it owns when it goes down. + * This allows other CPUs to claim the banks on rediscovery. + */ +void cmci_clear(void) +{ + unsigned long flags; + int i; + int banks; + u64 val; + + if (!cmci_supported(&banks)) + return; + spin_lock_irqsave(&cmci_discover_lock, flags); + for (i = 0; i < banks; i++) { + if (!test_bit(i, __get_cpu_var(mce_banks_owned))) + continue; + /* Disable CMCI */ + rdmsrl(MSR_IA32_MC0_CTL2 + i, val); + val &= ~(CMCI_EN|CMCI_THRESHOLD_MASK); + wrmsrl(MSR_IA32_MC0_CTL2 + i, val); + __clear_bit(i, __get_cpu_var(mce_banks_owned)); + } + spin_unlock_irqrestore(&cmci_discover_lock, flags); +} + +/* + * After a CPU went down cycle through all the others and rediscover + * Must run in process context. + */ +void cmci_rediscover(int dying) +{ + int banks; + int cpu; + cpumask_var_t old; + + if (!cmci_supported(&banks)) + return; + if (!alloc_cpumask_var(&old, GFP_KERNEL)) + return; + cpumask_copy(old, ¤t->cpus_allowed); + + for_each_online_cpu(cpu) { + if (cpu == dying) + continue; + if (set_cpus_allowed_ptr(current, cpumask_of(cpu))) + continue; + /* Recheck banks in case CPUs don't all have the same */ + if (cmci_supported(&banks)) + cmci_discover(banks, 0); + } + + set_cpus_allowed_ptr(current, old); + free_cpumask_var(old); +} + +/* + * Reenable CMCI on this CPU in case a CPU down failed. + */ +void cmci_reenable(void) +{ + int banks; + if (cmci_supported(&banks)) + cmci_discover(banks, 0); +} + +static void intel_init_cmci(void) +{ + int banks; + + if (!cmci_supported(&banks)) + return; + + mce_threshold_vector = intel_threshold_interrupt; + cmci_discover(banks, 1); + /* + * For CPU #0 this runs with still disabled APIC, but that's + * ok because only the vector is set up. We still do another + * check for the banks later for CPU #0 just to make sure + * to not miss any events. + */ + apic_write(APIC_LVTCMCI, THRESHOLD_APIC_VECTOR|APIC_DM_FIXED); + cmci_recheck(); +} + +void mce_intel_feature_init(struct cpuinfo_x86 *c) +{ + intel_init_thermal(c); + intel_init_cmci(); +} diff --git a/arch/x86/kernel/cpu/mcheck/mce_intel_64.c b/arch/x86/kernel/cpu/mcheck/mce_intel_64.c deleted file mode 100644 index 663a88e..0000000 --- a/arch/x86/kernel/cpu/mcheck/mce_intel_64.c +++ /dev/null @@ -1,225 +0,0 @@ -/* - * Intel specific MCE features. - * Copyright 2004 Zwane Mwaikambo <zwane@linuxpower.ca> - * Copyright (C) 2008, 2009 Intel Corporation - * Author: Andi Kleen - */ - -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/percpu.h> -#include <asm/processor.h> -#include <asm/msr.h> -#include <asm/mce.h> - -/* - * Support for Intel Correct Machine Check Interrupts. This allows - * the CPU to raise an interrupt when a corrected machine check happened. - * Normally we pick those up using a regular polling timer. - * Also supports reliable discovery of shared banks. - */ - -static DEFINE_PER_CPU(mce_banks_t, mce_banks_owned); - -/* - * cmci_discover_lock protects against parallel discovery attempts - * which could race against each other. - */ -static DEFINE_SPINLOCK(cmci_discover_lock); - -#define CMCI_THRESHOLD 1 - -static int cmci_supported(int *banks) -{ - u64 cap; - - if (mce_cmci_disabled || mce_ignore_ce) - return 0; - - /* - * Vendor check is not strictly needed, but the initial - * initialization is vendor keyed and this - * makes sure none of the backdoors are entered otherwise. - */ - if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL) - return 0; - if (!cpu_has_apic || lapic_get_maxlvt() < 6) - return 0; - rdmsrl(MSR_IA32_MCG_CAP, cap); - *banks = min_t(unsigned, MAX_NR_BANKS, cap & 0xff); - return !!(cap & MCG_CMCI_P); -} - -/* - * The interrupt handler. This is called on every event. - * Just call the poller directly to log any events. - * This could in theory increase the threshold under high load, - * but doesn't for now. - */ -static void intel_threshold_interrupt(void) -{ - machine_check_poll(MCP_TIMESTAMP, &__get_cpu_var(mce_banks_owned)); - mce_notify_irq(); -} - -static void print_update(char *type, int *hdr, int num) -{ - if (*hdr == 0) - printk(KERN_INFO "CPU %d MCA banks", smp_processor_id()); - *hdr = 1; - printk(KERN_CONT " %s:%d", type, num); -} - -/* - * Enable CMCI (Corrected Machine Check Interrupt) for available MCE banks - * on this CPU. Use the algorithm recommended in the SDM to discover shared - * banks. - */ -static void cmci_discover(int banks, int boot) -{ - unsigned long *owned = (void *)&__get_cpu_var(mce_banks_owned); - unsigned long flags; - int hdr = 0; - int i; - - spin_lock_irqsave(&cmci_discover_lock, flags); - for (i = 0; i < banks; i++) { - u64 val; - - if (test_bit(i, owned)) - continue; - - rdmsrl(MSR_IA32_MC0_CTL2 + i, val); - - /* Already owned by someone else? */ - if (val & CMCI_EN) { - if (test_and_clear_bit(i, owned) || boot) - print_update("SHD", &hdr, i); - __clear_bit(i, __get_cpu_var(mce_poll_banks)); - continue; - } - - val |= CMCI_EN | CMCI_THRESHOLD; - wrmsrl(MSR_IA32_MC0_CTL2 + i, val); - rdmsrl(MSR_IA32_MC0_CTL2 + i, val); - - /* Did the enable bit stick? -- the bank supports CMCI */ - if (val & CMCI_EN) { - if (!test_and_set_bit(i, owned) || boot) - print_update("CMCI", &hdr, i); - __clear_bit(i, __get_cpu_var(mce_poll_banks)); - } else { - WARN_ON(!test_bit(i, __get_cpu_var(mce_poll_banks))); - } - } - spin_unlock_irqrestore(&cmci_discover_lock, flags); - if (hdr) - printk(KERN_CONT "\n"); -} - -/* - * Just in case we missed an event during initialization check - * all the CMCI owned banks. - */ -void cmci_recheck(void) -{ - unsigned long flags; - int banks; - - if (!mce_available(¤t_cpu_data) || !cmci_supported(&banks)) - return; - local_irq_save(flags); - machine_check_poll(MCP_TIMESTAMP, &__get_cpu_var(mce_banks_owned)); - local_irq_restore(flags); -} - -/* - * Disable CMCI on this CPU for all banks it owns when it goes down. - * This allows other CPUs to claim the banks on rediscovery. - */ -void cmci_clear(void) -{ - unsigned long flags; - int i; - int banks; - u64 val; - - if (!cmci_supported(&banks)) - return; - spin_lock_irqsave(&cmci_discover_lock, flags); - for (i = 0; i < banks; i++) { - if (!test_bit(i, __get_cpu_var(mce_banks_owned))) - continue; - /* Disable CMCI */ - rdmsrl(MSR_IA32_MC0_CTL2 + i, val); - val &= ~(CMCI_EN|CMCI_THRESHOLD_MASK); - wrmsrl(MSR_IA32_MC0_CTL2 + i, val); - __clear_bit(i, __get_cpu_var(mce_banks_owned)); - } - spin_unlock_irqrestore(&cmci_discover_lock, flags); -} - -/* - * After a CPU went down cycle through all the others and rediscover - * Must run in process context. - */ -void cmci_rediscover(int dying) -{ - int banks; - int cpu; - cpumask_var_t old; - - if (!cmci_supported(&banks)) - return; - if (!alloc_cpumask_var(&old, GFP_KERNEL)) - return; - cpumask_copy(old, ¤t->cpus_allowed); - - for_each_online_cpu(cpu) { - if (cpu == dying) - continue; - if (set_cpus_allowed_ptr(current, cpumask_of(cpu))) - continue; - /* Recheck banks in case CPUs don't all have the same */ - if (cmci_supported(&banks)) - cmci_discover(banks, 0); - } - - set_cpus_allowed_ptr(current, old); - free_cpumask_var(old); -} - -/* - * Reenable CMCI on this CPU in case a CPU down failed. - */ -void cmci_reenable(void) -{ - int banks; - if (cmci_supported(&banks)) - cmci_discover(banks, 0); -} - -static void intel_init_cmci(void) -{ - int banks; - - if (!cmci_supported(&banks)) - return; - - mce_threshold_vector = intel_threshold_interrupt; - cmci_discover(banks, 1); - /* - * For CPU #0 this runs with still disabled APIC, but that's - * ok because only the vector is set up. We still do another - * check for the banks later for CPU #0 just to make sure - * to not miss any events. - */ - apic_write(APIC_LVTCMCI, THRESHOLD_APIC_VECTOR|APIC_DM_FIXED); - cmci_recheck(); -} - -void mce_intel_feature_init(struct cpuinfo_x86 *c) -{ - intel_init_thermal(c); - intel_init_cmci(); -} -- cgit v1.1 From 95ee14e4379c5e19c0897c872350570402014742 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" <hpa@zytor.com> Date: Tue, 9 Jun 2009 18:20:39 -0700 Subject: x86: cap iomem_resource to addressable physical memory iomem_resource is by default initialized to -1, which means 64 bits of physical address space if 64-bit resources are enabled. However, x86 CPUs cannot address 64 bits of physical address space. Thus, we want to cap the physical address space to what the union of all CPU can actually address. Without this patch, we may end up assigning inaccessible values to uninitialized 64-bit PCI memory resources. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Martin Mares <mj@ucw.cz> Cc: stable@kernel.org --- arch/x86/kernel/cpu/common.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index 3ffdcfa..5b9cb88 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -853,6 +853,9 @@ static void __cpuinit identify_cpu(struct cpuinfo_x86 *c) #if defined(CONFIG_NUMA) && defined(CONFIG_X86_64) numa_add_cpu(smp_processor_id()); #endif + + /* Cap the iomem address space to what is addressable on all CPUs */ + iomem_resource.end &= (1ULL << c->x86_phys_bits) - 1; } #ifdef CONFIG_X86_64 -- cgit v1.1 From e2a7147640a54eb812c8ab5f3ee4424b92db4856 Mon Sep 17 00:00:00 2001 From: Cliff Wickman <cpw@sgi.com> Date: Tue, 16 Jun 2009 16:43:40 -0500 Subject: x86: correct the conversion of EFI memory types This patch causes all the EFI_RESERVED_TYPE memory reservations to be recorded in the e820 table as type E820_RESERVED. (This patch replaces one called 'x86: vendor reserved memory type'. This version has been discussed a bit with Peter and Yinghai but not given a final opinion.) Without this patch EFI_RESERVED_TYPE memory reservations may be marked usable in the e820 table. There may be a collision between kernel use and some reserver's use of this memory. (An example use of this functionality is the UV system, which will access extremely large areas of memory with a memory engine that allows a user to address beyond the processor's range. Such areas are reserved in the EFI table by the BIOS. Some loaders have a restricted number of entries possible in the e820 table, hence the need to record the reservations in the unrestricted EFI table.) The call to do_add_efi_memmap() is only made if "add_efi_memmap" is specified on the kernel command line. Signed-off-by: Cliff Wickman <cpw@sgi.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> --- arch/x86/kernel/efi.c | 31 ++++++++++++++++++++++++++++--- 1 file changed, 28 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/efi.c b/arch/x86/kernel/efi.c index 1736acc..96f7ac0 100644 --- a/arch/x86/kernel/efi.c +++ b/arch/x86/kernel/efi.c @@ -240,10 +240,35 @@ static void __init do_add_efi_memmap(void) unsigned long long size = md->num_pages << EFI_PAGE_SHIFT; int e820_type; - if (md->attribute & EFI_MEMORY_WB) - e820_type = E820_RAM; - else + switch (md->type) { + case EFI_LOADER_CODE: + case EFI_LOADER_DATA: + case EFI_BOOT_SERVICES_CODE: + case EFI_BOOT_SERVICES_DATA: + case EFI_CONVENTIONAL_MEMORY: + if (md->attribute & EFI_MEMORY_WB) + e820_type = E820_RAM; + else + e820_type = E820_RESERVED; + break; + case EFI_ACPI_RECLAIM_MEMORY: + e820_type = E820_ACPI; + break; + case EFI_ACPI_MEMORY_NVS: + e820_type = E820_NVS; + break; + case EFI_UNUSABLE_MEMORY: + e820_type = E820_UNUSABLE; + break; + default: + /* + * EFI_RESERVED_TYPE EFI_RUNTIME_SERVICES_CODE + * EFI_RUNTIME_SERVICES_DATA EFI_MEMORY_MAPPED_IO + * EFI_MEMORY_MAPPED_IO_PORT_SPACE EFI_PAL_CODE + */ e820_type = E820_RESERVED; + break; + } e820_add_region(start, size, e820_type); } sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map); -- cgit v1.1 From 28b4868820a56de661f54742ff91b78e12f1e582 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" <hpa@zytor.com> Date: Tue, 16 Jun 2009 17:39:04 -0700 Subject: x86, boot: use .code16gcc instead of .code16 Use .code16gcc to compile arch/x86/boot/bioscall.S rather than .code16, since some older versions of binutils can't generate 32-bit addressing expressions (67 prefixes) in .code16 mode, only in .code16gcc mode. Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: H. Peter Anvin <hpa@zytor.com> --- arch/x86/boot/bioscall.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/boot/bioscall.S b/arch/x86/boot/bioscall.S index 5077937..1dfbf64 100644 --- a/arch/x86/boot/bioscall.S +++ b/arch/x86/boot/bioscall.S @@ -13,7 +13,7 @@ * touching registers they shouldn't be. */ - .code16 + .code16gcc .text .globl intcall .type intcall, @function -- cgit v1.1 From f01789c68882d846946cf9b972cf090b283d1f73 Mon Sep 17 00:00:00 2001 From: Paul Mundt <lethal@linux-sh.org> Date: Wed, 17 Jun 2009 10:43:13 +0900 Subject: sh: Use generic atomic64_t implementation. Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/Kconfig | 1 + arch/sh/include/asm/atomic.h | 2 ++ 2 files changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 586cd04..a6f9eaa 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -16,6 +16,7 @@ config SUPERH select HAVE_ARCH_TRACEHOOK select HAVE_DMA_API_DEBUG select RTC_LIB + select GENERIC_ATOMIC64 help The SuperH is a RISC processor targeted for use in embedded systems and consumer electronics; it was also used in the Sega Dreamcast diff --git a/arch/sh/include/asm/atomic.h b/arch/sh/include/asm/atomic.h index 157c320..e8e7813 100644 --- a/arch/sh/include/asm/atomic.h +++ b/arch/sh/include/asm/atomic.h @@ -85,4 +85,6 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u) #define smp_mb__after_atomic_inc() barrier() #include <asm-generic/atomic-long.h> +#include <asm-generic/atomic64.h> + #endif /* __ASM_SH_ATOMIC_H */ -- cgit v1.1 From c155ee10c212254e9cdfe7b3eab4e8c13990c231 Mon Sep 17 00:00:00 2001 From: Wolfram Sang <w.sang@pengutronix.de> Date: Wed, 17 Jun 2009 00:30:17 -0600 Subject: powerpc/5200: Update pcm030.dts to add i2c eeprom and delete cruft Add a node for the i2c eeprom and delete the superflous gpio-example. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> --- arch/powerpc/boot/dts/pcm030.dts | 26 ++++---------------------- 1 file changed, 4 insertions(+), 22 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/boot/dts/pcm030.dts b/arch/powerpc/boot/dts/pcm030.dts index 8958347..30bfdc0 100644 --- a/arch/powerpc/boot/dts/pcm030.dts +++ b/arch/powerpc/boot/dts/pcm030.dts @@ -258,34 +258,16 @@ compatible = "nxp,pcf8563"; reg = <0x51>; }; - /* FIXME: EEPROM */ + eeprom@52 { + compatible = "catalyst,24c32"; + reg = <0x52>; + }; }; sram@8000 { compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram"; reg = <0x8000 0x4000>; }; - - /* This is only an example device to show the usage of gpios. It maps all available - * gpios to the "gpio-provider" device. - */ - gpio { - compatible = "gpio-provider"; - - /* mpc52xx exp.con patchfield */ - gpios = <&gpio_wkup 0 0 /* GPIO_WKUP_7 11d jp13-3 */ - &gpio_wkup 1 0 /* GPIO_WKUP_6 14c */ - &gpio_wkup 6 0 /* PSC2_4 43c x5-11 */ - &gpio_simple 2 0 /* IRDA_1 24c x7-6 set GPS_PORT_CONFIG[IRDA] = 0 */ - &gpio_simple 3 0 /* IRDA_0 x8-5 set GPS_PORT_CONFIG[IRDA] = 0 */ - &gpt2 0 0 /* timer2 12d x4-4 */ - &gpt3 0 0 /* timer3 13d x6-4 */ - &gpt4 0 0 /* timer4 61c x2-16 */ - &gpt5 0 0 /* timer5 44c x7-11 */ - &gpt6 0 0 /* timer6 60c x8-15 */ - &gpt7 0 0 /* timer7 36a x17-9 */ - >; - }; }; pci@f0000d00 { -- cgit v1.1 From 87c441e54dfcf9f45593ecaf68e7e18ea53d5e13 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk <wd@denx.de> Date: Wed, 17 Jun 2009 00:30:22 -0600 Subject: powerpc/5xxx: Add common mpc5xxx_get_bus_frequency() function So far, MPC512x used mpc512x_find_ips_freq() to get the bus frequency, while MPC52xx used mpc52xx_find_ipb_freq(). Despite the different clock names (IPS vs. IPB) the code was identical. Use common code for both processor families. Signed-off-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> --- arch/powerpc/include/asm/mpc512x.h | 22 ------------------- arch/powerpc/include/asm/mpc52xx.h | 2 +- arch/powerpc/include/asm/mpc5xxx.h | 22 +++++++++++++++++++ arch/powerpc/platforms/512x/clock.c | 2 +- arch/powerpc/platforms/512x/mpc512x.h | 1 - arch/powerpc/platforms/512x/mpc512x_shared.c | 23 ------------------- arch/powerpc/platforms/52xx/mpc52xx_common.c | 32 +-------------------------- arch/powerpc/sysdev/Makefile | 3 +++ arch/powerpc/sysdev/mpc5xxx_clocks.c | 33 ++++++++++++++++++++++++++++ 9 files changed, 61 insertions(+), 79 deletions(-) delete mode 100644 arch/powerpc/include/asm/mpc512x.h create mode 100644 arch/powerpc/include/asm/mpc5xxx.h create mode 100644 arch/powerpc/sysdev/mpc5xxx_clocks.c (limited to 'arch') diff --git a/arch/powerpc/include/asm/mpc512x.h b/arch/powerpc/include/asm/mpc512x.h deleted file mode 100644 index c48a165..0000000 --- a/arch/powerpc/include/asm/mpc512x.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved. - * - * Author: John Rigby, <jrigby@freescale.com>, Friday Apr 13 2007 - * - * Description: - * MPC5121 Prototypes and definitions - * - * This is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ - -#ifndef __ASM_POWERPC_MPC512x_H__ -#define __ASM_POWERPC_MPC512x_H__ - -extern unsigned long mpc512x_find_ips_freq(struct device_node *node); - -#endif /* __ASM_POWERPC_MPC512x_H__ */ - diff --git a/arch/powerpc/include/asm/mpc52xx.h b/arch/powerpc/include/asm/mpc52xx.h index 52e049c..1b4f697 100644 --- a/arch/powerpc/include/asm/mpc52xx.h +++ b/arch/powerpc/include/asm/mpc52xx.h @@ -16,6 +16,7 @@ #ifndef __ASSEMBLY__ #include <asm/types.h> #include <asm/prom.h> +#include <asm/mpc5xxx.h> #endif /* __ASSEMBLY__ */ #include <linux/suspend.h> @@ -268,7 +269,6 @@ struct mpc52xx_intr { #ifndef __ASSEMBLY__ /* mpc52xx_common.c */ -extern unsigned int mpc52xx_find_ipb_freq(struct device_node *node); extern void mpc5200_setup_xlb_arbiter(void); extern void mpc52xx_declare_of_platform_devices(void); extern void mpc52xx_map_common_devices(void); diff --git a/arch/powerpc/include/asm/mpc5xxx.h b/arch/powerpc/include/asm/mpc5xxx.h new file mode 100644 index 0000000..5ce9c5f --- /dev/null +++ b/arch/powerpc/include/asm/mpc5xxx.h @@ -0,0 +1,22 @@ +/* + * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved. + * + * Author: John Rigby, <jrigby@freescale.com>, Friday Apr 13 2007 + * + * Description: + * MPC5xxx Prototypes and definitions + * + * This is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#ifndef __ASM_POWERPC_MPC5xxx_H__ +#define __ASM_POWERPC_MPC5xxx_H__ + +extern unsigned long mpc5xxx_get_bus_frequency(struct device_node *node); + +#endif /* __ASM_POWERPC_MPC5xxx_H__ */ + diff --git a/arch/powerpc/platforms/512x/clock.c b/arch/powerpc/platforms/512x/clock.c index 1bcff94..f4c4c6f 100644 --- a/arch/powerpc/platforms/512x/clock.c +++ b/arch/powerpc/platforms/512x/clock.c @@ -24,7 +24,7 @@ #include <linux/io.h> #include <linux/of_platform.h> -#include <asm/mpc512x.h> +#include <asm/mpc5xxx.h> #include <asm/clk_interface.h> #undef CLK_DEBUG diff --git a/arch/powerpc/platforms/512x/mpc512x.h b/arch/powerpc/platforms/512x/mpc512x.h index 9c03693..22a5352 100644 --- a/arch/powerpc/platforms/512x/mpc512x.h +++ b/arch/powerpc/platforms/512x/mpc512x.h @@ -11,7 +11,6 @@ #ifndef __MPC512X_H__ #define __MPC512X_H__ -extern unsigned long mpc512x_find_ips_freq(struct device_node *node); extern void __init mpc512x_init_IRQ(void); void __init mpc512x_declare_of_platform_devices(void); #endif /* __MPC512X_H__ */ diff --git a/arch/powerpc/platforms/512x/mpc512x_shared.c b/arch/powerpc/platforms/512x/mpc512x_shared.c index d8cd579..434d683 100644 --- a/arch/powerpc/platforms/512x/mpc512x_shared.c +++ b/arch/powerpc/platforms/512x/mpc512x_shared.c @@ -24,29 +24,6 @@ #include "mpc512x.h" -unsigned long -mpc512x_find_ips_freq(struct device_node *node) -{ - struct device_node *np; - const unsigned int *p_ips_freq = NULL; - - of_node_get(node); - while (node) { - p_ips_freq = of_get_property(node, "bus-frequency", NULL); - if (p_ips_freq) - break; - - np = of_get_parent(node); - of_node_put(node); - node = np; - } - if (node) - of_node_put(node); - - return p_ips_freq ? *p_ips_freq : 0; -} -EXPORT_SYMBOL(mpc512x_find_ips_freq); - void __init mpc512x_init_IRQ(void) { struct device_node *np; diff --git a/arch/powerpc/platforms/52xx/mpc52xx_common.c b/arch/powerpc/platforms/52xx/mpc52xx_common.c index 8e3dd5a..a46bad0 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_common.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_common.c @@ -47,36 +47,6 @@ static DEFINE_SPINLOCK(mpc52xx_lock); static struct mpc52xx_gpt __iomem *mpc52xx_wdt; static struct mpc52xx_cdm __iomem *mpc52xx_cdm; -/** - * mpc52xx_find_ipb_freq - Find the IPB bus frequency for a device - * @node: device node - * - * Returns IPB bus frequency, or 0 if the bus frequency cannot be found. - */ -unsigned int -mpc52xx_find_ipb_freq(struct device_node *node) -{ - struct device_node *np; - const unsigned int *p_ipb_freq = NULL; - - of_node_get(node); - while (node) { - p_ipb_freq = of_get_property(node, "bus-frequency", NULL); - if (p_ipb_freq) - break; - - np = of_get_parent(node); - of_node_put(node); - node = np; - } - if (node) - of_node_put(node); - - return p_ipb_freq ? *p_ipb_freq : 0; -} -EXPORT_SYMBOL(mpc52xx_find_ipb_freq); - - /* * Configure the XLB arbiter settings to match what Linux expects. */ @@ -221,7 +191,7 @@ unsigned int mpc52xx_get_xtal_freq(struct device_node *node) if (!mpc52xx_cdm) return 0; - freq = mpc52xx_find_ipb_freq(node); + freq = mpc5xxx_get_bus_frequency(node); if (!freq) return 0; diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index d073bfd..9d4b174 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -50,6 +50,9 @@ obj-$(CONFIG_PPC_DCR) += dcr.o obj-$(CONFIG_8xx) += mpc8xx_pic.o cpm1.o obj-$(CONFIG_UCODE_PATCH) += micropatch.o +obj-$(CONFIG_PPC_MPC512x) += mpc5xxx_clocks.o +obj-$(CONFIG_PPC_MPC52xx) += mpc5xxx_clocks.o + ifeq ($(CONFIG_SUSPEND),y) obj-$(CONFIG_6xx) += 6xx-suspend.o endif diff --git a/arch/powerpc/sysdev/mpc5xxx_clocks.c b/arch/powerpc/sysdev/mpc5xxx_clocks.c new file mode 100644 index 0000000..34e12f9 --- /dev/null +++ b/arch/powerpc/sysdev/mpc5xxx_clocks.c @@ -0,0 +1,33 @@ +/** + * mpc5xxx_get_bus_frequency - Find the bus frequency for a device + * @node: device node + * + * Returns bus frequency (IPS on MPC512x, IPB on MPC52xx), + * or 0 if the bus frequency cannot be found. + */ + +#include <linux/kernel.h> +#include <linux/of_platform.h> + +unsigned int +mpc5xxx_get_bus_frequency(struct device_node *node) +{ + struct device_node *np; + const unsigned int *p_bus_freq = NULL; + + of_node_get(node); + while (node) { + p_bus_freq = of_get_property(node, "bus-frequency", NULL); + if (p_bus_freq) + break; + + np = of_get_parent(node); + of_node_put(node); + node = np; + } + if (node) + of_node_put(node); + + return p_bus_freq ? *p_bus_freq : 0; +} +EXPORT_SYMBOL(mpc5xxx_get_bus_frequency); -- cgit v1.1 From 0ec39885b237c35109644f5d8232228026a72715 Mon Sep 17 00:00:00 2001 From: Magnus Damm <damm@igel.co.jp> Date: Wed, 17 Jun 2009 04:48:20 +0000 Subject: sh: unbreak WARN_ON() Fix WARN_ON() by modifying the bug trap handling code to always return in the in-kernel instruction pointer case. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/kernel/traps.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/sh/kernel/traps.c b/arch/sh/kernel/traps.c index 46348ed0..b3e0067 100644 --- a/arch/sh/kernel/traps.c +++ b/arch/sh/kernel/traps.c @@ -69,6 +69,7 @@ BUILD_TRAP_HANDLER(bug) insn_size_t insn = *(insn_size_t *)instruction_pointer(regs); if (insn == TRAPA_BUG_OPCODE) handle_BUG(regs); + return; } #endif -- cgit v1.1 From 4c7eb4ebc9001ce343969f58fa538e164e82000b Mon Sep 17 00:00:00 2001 From: Magnus Damm <damm@igel.co.jp> Date: Wed, 17 Jun 2009 04:55:42 +0000 Subject: sh: use kzalloc() for cpg clocks Convert the shared clock cpg code from bootmem to slab. Without this patch the current bootmem code triggers WARN_ON() because the slab is available. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/kernel/cpu/clock-cpg.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/sh/kernel/cpu/clock-cpg.c b/arch/sh/kernel/cpu/clock-cpg.c index 275942e..6dfe2cc 100644 --- a/arch/sh/kernel/cpu/clock-cpg.c +++ b/arch/sh/kernel/cpu/clock-cpg.c @@ -1,6 +1,6 @@ #include <linux/clk.h> #include <linux/compiler.h> -#include <linux/bootmem.h> +#include <linux/slab.h> #include <linux/io.h> #include <asm/clock.h> @@ -127,10 +127,11 @@ int __init sh_clk_div6_register(struct clk *clks, int nr) int k; freq_table_size *= (nr_divs + 1); - - freq_table = alloc_bootmem(freq_table_size * nr); - if (!freq_table) + freq_table = kzalloc(freq_table_size * nr, GFP_KERNEL); + if (!freq_table) { + pr_err("sh_clk_div6_register: unable to alloc memory\n"); return -ENOMEM; + } for (k = 0; !ret && (k < nr); k++) { clkp = clks + k; @@ -175,10 +176,11 @@ int __init sh_clk_div4_register(struct clk *clks, int nr, int k; freq_table_size *= (nr_divs + 1); - - freq_table = alloc_bootmem(freq_table_size * nr); - if (!freq_table) + freq_table = kzalloc(freq_table_size * nr, GFP_KERNEL); + if (!freq_table) { + pr_err("sh_clk_div4_register: unable to alloc memory\n"); return -ENOMEM; + } for (k = 0; !ret && (k < nr); k++) { clkp = clks + k; -- cgit v1.1 From 203abd67b75f7714ce98ab0cdbd6cfd7ad79dec4 Mon Sep 17 00:00:00 2001 From: Andi Kleen <andi@firstfloor.org> Date: Mon, 15 Jun 2009 14:52:01 +0200 Subject: x86: mce: Handle banks == 0 case in K7 quirk Vegard Nossum reported: > I get an MCE-related crash like this in latest linus tree: > > [ 0.115341] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > [ 0.116396] CPU: L2 Cache: 512K (64 bytes/line) > [ 0.120570] mce: CPU supports 0 MCE banks > [ 0.124870] BUG: unable to handle kernel NULL pointer dereference at 00000000 00000010 > [ 0.128001] IP: [<ffffffff813b98ad>] mcheck_init+0x278/0x320 > [ 0.128001] PGD 0 > [ 0.128001] Thread overran stack, or stack corrupted > [ 0.128001] Oops: 0002 [#1] PREEMPT SMP > [ 0.128001] last sysfs file: > [ 0.128001] CPU 0 > [ 0.128001] Modules linked in: > [ 0.128001] Pid: 0, comm: swapper Not tainted 2.6.30 #426 > [ 0.128001] RIP: 0010:[<ffffffff813b98ad>] [<ffffffff813b98ad>] mcheck_init+0x278/0x320 > [ 0.128001] RSP: 0018:ffffffff81595e38 EFLAGS: 00000246 > [ 0.128001] RAX: 0000000000000010 RBX: ffffffff8158f900 RCX: 0000000000000000 > [ 0.128001] RDX: 0000000000000000 RSI: 00000000000000ff RDI: 0000000000000010 > [ 0.128001] RBP: ffffffff81595e68 R08: 0000000000000001 R09: 0000000000000000 > [ 0.128001] R10: 0000000000000010 R11: 0000000000000000 R12: 0000000000000000 > [ 0.128001] R13: 00000000ffffffff R14: 0000000000000000 R15: 0000000000000000 > [ 0.128001] FS: 0000000000000000(0000) GS:ffff880002288000(0000) knlGS:00000 > 00000000000 > [ 0.128001] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b > [ 0.128001] CR2: 0000000000000010 CR3: 0000000001001000 CR4: 00000000000006b0 > [ 0.128001] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > [ 0.128001] DR3: 0000000000000000 DR6: 0000000000000000 DR7: 0000000000000000 > [ 0.128001] Process swapper (pid: 0, threadinfo ffffffff81594000, task ffffff > ff8152a4a0) > [ 0.128001] Stack: > [ 0.128001] 0000000081595e68 5aa50ed3b4ddbe6e ffffffff8158f900 ffffffff8158f > 914 > [ 0.128001] ffffffff8158f948 0000000000000000 ffffffff81595eb8 ffffffff813b8 > 69c > [ 0.128001] 5aa50ed3b4ddbe6e 00000001078bfbfd 0000062300000800 5aa50ed3b4ddb > e6e > [ 0.128001] Call Trace: > [ 0.128001] [<ffffffff813b869c>] identify_cpu+0x331/0x392 > [ 0.128001] [<ffffffff815a1445>] identify_boot_cpu+0x23/0x6e > [ 0.128001] [<ffffffff815a14ac>] check_bugs+0x1c/0x60 > [ 0.128001] [<ffffffff8159c075>] start_kernel+0x403/0x46e > [ 0.128001] [<ffffffff8159b2ac>] x86_64_start_reservations+0xac/0xd5 > [ 0.128001] [<ffffffff8159b3ea>] x86_64_start_kernel+0x115/0x14b > [ 0.128001] [<ffffffff8159b140>] ? early_idt_handler+0x0/0x71 This happens on QEMU which reports MCA capability, but no banks. Without this patch there is a buffer overrun and boot ops because the code would try to initialize the 0 element of a zero length kmalloc() buffer. Reported-by: Vegard Nossum <vegard.nossum@gmail.com> Tested-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Andi Kleen <ak@linux.intel.com> LKML-Reference: <20090615125200.GD31969@one.firstfloor.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/kernel/cpu/mcheck/mce.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index fabba15..d9d77cf 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -1245,7 +1245,7 @@ static void mce_cpu_quirks(struct cpuinfo_x86 *c) * Various K7s with broken bank 0 around. Always disable * by default. */ - if (c->x86 == 6) + if (c->x86 == 6 && banks > 0) bank[0] = 0; } -- cgit v1.1 From 5a62a22514f97c04b434163195820cbe31ded888 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Date: Tue, 26 May 2009 09:33:02 +0000 Subject: sh: sh7785lcr: add platform data for r8a66597-hcd and remove redundant parameter for r8a66597-hcd. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/boards/board-sh7785lcr.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/sh/boards/board-sh7785lcr.c b/arch/sh/boards/board-sh7785lcr.c index 7be56fb..42410a1 100644 --- a/arch/sh/boards/board-sh7785lcr.c +++ b/arch/sh/boards/board-sh7785lcr.c @@ -15,16 +15,18 @@ #include <linux/fb.h> #include <linux/mtd/physmap.h> #include <linux/delay.h> +#include <linux/interrupt.h> #include <linux/i2c.h> #include <linux/i2c-pca-platform.h> #include <linux/i2c-algo-pca.h> +#include <linux/usb/r8a66597.h> #include <linux/irq.h> #include <linux/clk.h> #include <linux/errno.h> #include <mach/sh7785lcr.h> +#include <cpu/sh7785.h> #include <asm/heartbeat.h> #include <asm/clock.h> -#include <cpu/sh7785.h> /* * NOTE: This board has 2 physical memory maps. @@ -98,18 +100,21 @@ static struct platform_device nor_flash_device = { .resource = nor_flash_resources, }; +static struct r8a66597_platdata r8a66597_data = { + .xtal = R8A66597_PLATDATA_XTAL_12MHZ, + .vif = 1, +}; + static struct resource r8a66597_usb_host_resources[] = { [0] = { - .name = "r8a66597_hcd", .start = R8A66597_ADDR, .end = R8A66597_ADDR + R8A66597_SIZE - 1, .flags = IORESOURCE_MEM, }, [1] = { - .name = "r8a66597_hcd", .start = 2, .end = 2, - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW, }, }; @@ -119,6 +124,7 @@ static struct platform_device r8a66597_usb_host_device = { .dev = { .dma_mask = NULL, .coherent_dma_mask = 0xffffffff, + .platform_data = &r8a66597_data, }, .num_resources = ARRAY_SIZE(r8a66597_usb_host_resources), .resource = r8a66597_usb_host_resources, -- cgit v1.1 From 6239b20d1ba60810c122390e79f968ccb69908a6 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Date: Tue, 26 May 2009 09:33:05 +0000 Subject: sh: highlander: add platform data for r8a66597-hcd and remove redundant parameter for r8a66597-hcd. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/boards/mach-highlander/setup.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/sh/boards/mach-highlander/setup.c b/arch/sh/boards/mach-highlander/setup.c index 20fe72c..920ea76 100644 --- a/arch/sh/boards/mach-highlander/setup.c +++ b/arch/sh/boards/mach-highlander/setup.c @@ -19,6 +19,8 @@ #include <linux/types.h> #include <linux/i2c.h> #include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/usb/r8a66597.h> #include <net/ax88796.h> #include <asm/machvec.h> #include <mach/highlander.h> @@ -27,18 +29,21 @@ #include <asm/io.h> #include <asm/io_trapped.h> +static struct r8a66597_platdata r8a66597_data = { + .xtal = R8A66597_PLATDATA_XTAL_12MHZ, + .vif = 1, +}; + static struct resource r8a66597_usb_host_resources[] = { [0] = { - .name = "r8a66597_hcd", .start = 0xA4200000, .end = 0xA42000FF, .flags = IORESOURCE_MEM, }, [1] = { - .name = "r8a66597_hcd", .start = IRQ_EXT1, /* irq number */ .end = IRQ_EXT1, - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW, }, }; @@ -48,6 +53,7 @@ static struct platform_device r8a66597_usb_host_device = { .dev = { .dma_mask = NULL, /* don't use dma */ .coherent_dma_mask = 0xffffffff, + .platform_data = &r8a66597_data, }, .num_resources = ARRAY_SIZE(r8a66597_usb_host_resources), .resource = r8a66597_usb_host_resources, -- cgit v1.1 From fcaf99d20d86995cfa1a4f01b1273f9f7d74717e Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Date: Tue, 26 May 2009 09:33:08 +0000 Subject: sh: x3proto: add platform data for r8a66597-hcd and remove redundant parameter for r8a66597-hcd. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/boards/mach-x3proto/setup.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/sh/boards/mach-x3proto/setup.c b/arch/sh/boards/mach-x3proto/setup.c index a340492..8913ae3 100644 --- a/arch/sh/boards/mach-x3proto/setup.c +++ b/arch/sh/boards/mach-x3proto/setup.c @@ -15,6 +15,8 @@ #include <linux/io.h> #include <linux/smc91x.h> #include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/usb/r8a66597.h> #include <asm/ilsel.h> static struct resource heartbeat_resources[] = { @@ -58,17 +60,20 @@ static struct platform_device smc91x_device = { }, }; +static struct r8a66597_platdata r8a66597_data = { + .xtal = R8A66597_PLATDATA_XTAL_12MHZ, + .vif = 1, +}; + static struct resource r8a66597_usb_host_resources[] = { [0] = { - .name = "r8a66597_hcd", .start = 0x18040000, .end = 0x18080000 - 1, .flags = IORESOURCE_MEM, }, [1] = { - .name = "r8a66597_hcd", /* Filled in by ilsel */ - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW, }, }; @@ -78,6 +83,7 @@ static struct platform_device r8a66597_usb_host_device = { .dev = { .dma_mask = NULL, /* don't use dma */ .coherent_dma_mask = 0xffffffff, + .platform_data = &r8a66597_data, }, .num_resources = ARRAY_SIZE(r8a66597_usb_host_resources), .resource = r8a66597_usb_host_resources, -- cgit v1.1 From 6b64929c1e696090f32c31782e44d3b51754126f Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Date: Tue, 26 May 2009 09:33:11 +0000 Subject: sh: add platform data for r8a66597-hcd in setup-sh7366 and remove redundant parameter for r8a66597-hcd. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/kernel/cpu/sh4a/setup-sh7366.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c index 318516f..c18f7d0 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c @@ -15,6 +15,7 @@ #include <linux/serial_sci.h> #include <linux/uio_driver.h> #include <linux/sh_timer.h> +#include <linux/usb/r8a66597.h> #include <asm/clock.h> static struct resource iic_resources[] = { @@ -38,18 +39,20 @@ static struct platform_device iic_device = { .resource = iic_resources, }; +static struct r8a66597_platdata r8a66597_data = { + /* This set zero to all members */ +}; + static struct resource usb_host_resources[] = { [0] = { - .name = "r8a66597_hcd", .start = 0xa4d80000, .end = 0xa4d800ff, .flags = IORESOURCE_MEM, }, [1] = { - .name = "r8a66597_hcd", .start = 65, .end = 65, - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW, }, }; @@ -59,6 +62,7 @@ static struct platform_device usb_host_device = { .dev = { .dma_mask = NULL, .coherent_dma_mask = 0xffffffff, + .platform_data = &r8a66597_data, }, .num_resources = ARRAY_SIZE(usb_host_resources), .resource = usb_host_resources, -- cgit v1.1 From f73c8f53ccc13ae13c6dbfa002083448a5ad0c81 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Date: Tue, 26 May 2009 09:33:14 +0000 Subject: sh: add platform data for r8a66597-hcd in setup-sh7723 and remove redundant parameter for r8a66597-hcd. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/kernel/cpu/sh4a/setup-sh7723.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c index d8f4a13..e1bb80b 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c @@ -13,6 +13,7 @@ #include <linux/mm.h> #include <linux/serial_sci.h> #include <linux/uio_driver.h> +#include <linux/usb/r8a66597.h> #include <linux/sh_timer.h> #include <linux/io.h> #include <asm/clock.h> @@ -396,9 +397,12 @@ static struct platform_device rtc_device = { .resource = rtc_resources, }; +static struct r8a66597_platdata r8a66597_data = { + /* This set zero to all members */ +}; + static struct resource sh7723_usb_host_resources[] = { [0] = { - .name = "r8a66597_hcd", .start = 0xa4d80000, .end = 0xa4d800ff, .flags = IORESOURCE_MEM, @@ -406,7 +410,7 @@ static struct resource sh7723_usb_host_resources[] = { [1] = { .start = 65, .end = 65, - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW, }, }; @@ -416,6 +420,7 @@ static struct platform_device sh7723_usb_host_device = { .dev = { .dma_mask = NULL, /* not use dma */ .coherent_dma_mask = 0xffffffff, + .platform_data = &r8a66597_data, }, .num_resources = ARRAY_SIZE(sh7723_usb_host_resources), .resource = sh7723_usb_host_resources, -- cgit v1.1 From 0a861e9eb76c68b23be1aa4758269c5b412089a9 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Date: Tue, 12 May 2009 15:13:32 +0000 Subject: soc-camera: unify i2c camera device platform data Unify i2c camera device platform data to point to struct soc_camera_link for a smooth transition to soc-camera as a platform driver. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/boards/board-ap325rxa.c | 2 +- arch/sh/boards/mach-migor/setup.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c index 1c4d83e..8cc4687 100644 --- a/arch/sh/boards/board-ap325rxa.c +++ b/arch/sh/boards/board-ap325rxa.c @@ -417,7 +417,7 @@ static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = { }, { I2C_BOARD_INFO("ov772x", 0x21), - .platform_data = &ov7725_info, + .platform_data = &ov7725_info.link, }, }; diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c index 6ed401c..95d9021 100644 --- a/arch/sh/boards/mach-migor/setup.c +++ b/arch/sh/boards/mach-migor/setup.c @@ -430,11 +430,11 @@ static struct i2c_board_info migor_i2c_devices[] = { }, { I2C_BOARD_INFO("ov772x", 0x21), - .platform_data = &ov7725_info, + .platform_data = &ov7725_info.link, }, { I2C_BOARD_INFO("tw9910", 0x45), - .platform_data = &tw9910_info, + .platform_data = &tw9910_info.link, }, }; -- cgit v1.1 From 194a17305cb0b5e0686261b645d3fd537d2fc58d Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Date: Tue, 12 May 2009 15:13:36 +0000 Subject: SH: convert ap325rxa to soc-camera as platform-device Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/boards/board-ap325rxa.c | 50 ++++++++++++++++++++++++++--------------- 1 file changed, 32 insertions(+), 18 deletions(-) (limited to 'arch') diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c index 8cc4687..7ffd1b43 100644 --- a/arch/sh/boards/board-ap325rxa.c +++ b/arch/sh/boards/board-ap325rxa.c @@ -349,15 +349,6 @@ static int ov7725_power(struct device *dev, int mode) return 0; } -static struct ov772x_camera_info ov7725_info = { - .buswidth = SOCAM_DATAWIDTH_8, - .flags = OV772X_FLAG_VFLIP | OV772X_FLAG_HFLIP, - .edgectrl = OV772X_AUTO_EDGECTRL(0xf, 0), - .link = { - .power = ov7725_power, - }, -}; - static struct sh_mobile_ceu_info sh_mobile_ceu_info = { .flags = SH_CEU_FLAG_USE_8BIT_BUS, }; @@ -402,25 +393,48 @@ static struct platform_device sdcard_cn3_device = { }, }; -static struct platform_device *ap325rxa_devices[] __initdata = { - &smsc9118_device, - &ap325rxa_nor_flash_device, - &lcdc_device, - &ceu_device, - &nand_flash_device, - &sdcard_cn3_device, -}; - static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = { { I2C_BOARD_INFO("pcf8563", 0x51), }, +}; + +static struct i2c_board_info ap325rxa_i2c_camera[] = { { I2C_BOARD_INFO("ov772x", 0x21), + }, +}; + +static struct ov772x_camera_info ov7725_info = { + .buswidth = SOCAM_DATAWIDTH_8, + .flags = OV772X_FLAG_VFLIP | OV772X_FLAG_HFLIP, + .edgectrl = OV772X_AUTO_EDGECTRL(0xf, 0), + .link = { + .power = ov7725_power, + .board_info = &ap325rxa_i2c_camera[0], + .i2c_adapter_id = 0, + .module_name = "ov772x", + }, +}; + +static struct platform_device ap325rxa_camera = { + .name = "soc-camera-pdrv", + .id = 0, + .dev = { .platform_data = &ov7725_info.link, }, }; +static struct platform_device *ap325rxa_devices[] __initdata = { + &smsc9118_device, + &ap325rxa_nor_flash_device, + &lcdc_device, + &ceu_device, + &nand_flash_device, + &sdcard_cn3_device, + &ap325rxa_camera, +}; + static struct spi_board_info ap325rxa_spi_devices[] = { { .modalias = "mmc_spi", -- cgit v1.1 From 2cb582ca0d6bd0274b15c9ee9549fc2251b7b599 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Date: Tue, 12 May 2009 15:13:40 +0000 Subject: SH: convert migor to soc-camera as platform-device Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/boards/mach-migor/setup.c | 79 ++++++++++++++++++++++++++------------- 1 file changed, 52 insertions(+), 27 deletions(-) (limited to 'arch') diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c index 95d9021..f70f4644 100644 --- a/arch/sh/boards/mach-migor/setup.c +++ b/arch/sh/boards/mach-migor/setup.c @@ -381,21 +381,6 @@ static struct platform_device migor_ceu_device = { }, }; -static struct ov772x_camera_info ov7725_info = { - .buswidth = SOCAM_DATAWIDTH_8, - .link = { - .power = ov7725_power, - }, -}; - -static struct tw9910_video_info tw9910_info = { - .buswidth = SOCAM_DATAWIDTH_8, - .mpout = TW9910_MPO_FIELD, - .link = { - .power = tw9910_power, - } -}; - struct spi_gpio_platform_data sdcard_cn9_platform_data = { .sck = GPIO_PTD0, .mosi = GPIO_PTD1, @@ -410,16 +395,6 @@ static struct platform_device sdcard_cn9_device = { }, }; -static struct platform_device *migor_devices[] __initdata = { - &smc91x_eth_device, - &sh_keysc_device, - &migor_lcdc_device, - &migor_ceu_device, - &migor_nor_flash_device, - &migor_nand_flash_device, - &sdcard_cn9_device, -}; - static struct i2c_board_info migor_i2c_devices[] = { { I2C_BOARD_INFO("rs5c372b", 0x32), @@ -428,16 +403,66 @@ static struct i2c_board_info migor_i2c_devices[] = { I2C_BOARD_INFO("migor_ts", 0x51), .irq = 38, /* IRQ6 */ }, +}; + +static struct i2c_board_info migor_i2c_camera[] = { { I2C_BOARD_INFO("ov772x", 0x21), - .platform_data = &ov7725_info.link, }, { I2C_BOARD_INFO("tw9910", 0x45), - .platform_data = &tw9910_info.link, }, }; +static struct ov772x_camera_info ov7725_info = { + .buswidth = SOCAM_DATAWIDTH_8, + .link = { + .power = ov7725_power, + .board_info = &migor_i2c_camera[0], + .i2c_adapter_id = 0, + .module_name = "ov772x", + }, +}; + +static struct tw9910_video_info tw9910_info = { + .buswidth = SOCAM_DATAWIDTH_8, + .mpout = TW9910_MPO_FIELD, + .link = { + .power = tw9910_power, + .board_info = &migor_i2c_camera[1], + .i2c_adapter_id = 0, + .module_name = "tw9910", + } +}; + +static struct platform_device migor_camera[] = { + { + .name = "soc-camera-pdrv", + .id = 0, + .dev = { + .platform_data = &ov7725_info.link, + }, + }, { + .name = "soc-camera-pdrv", + .id = 1, + .dev = { + .platform_data = &tw9910_info.link, + }, + }, +}; + +static struct platform_device *migor_devices[] __initdata = { + &smc91x_eth_device, + &sh_keysc_device, + &migor_lcdc_device, + &migor_ceu_device, + &migor_nor_flash_device, + &migor_nand_flash_device, + &sdcard_cn9_device, + &migor_camera[0], + &migor_camera[1], +}; + static struct spi_board_info migor_spi_devices[] = { { .modalias = "mmc_spi", -- cgit v1.1 From e7c5a4f292e0d1f4ba9a3a94b2c8e8b71e35b25a Mon Sep 17 00:00:00 2001 From: Wolfram Sang <w.sang@pengutronix.de> Date: Wed, 17 Jun 2009 06:30:31 -0600 Subject: powerpc/5121: make clock debug output more readable This patch refactors clock.c by replacing printk calls with pr_info/pr_cont, and uses '=' in output to connect key/value pairs Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> --- arch/powerpc/platforms/512x/clock.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/512x/clock.c b/arch/powerpc/platforms/512x/clock.c index f4c4c6f..84544d0 100644 --- a/arch/powerpc/platforms/512x/clock.c +++ b/arch/powerpc/platforms/512x/clock.c @@ -83,13 +83,13 @@ static void dump_clocks(void) mutex_lock(&clocks_mutex); printk(KERN_INFO "CLOCKS:\n"); list_for_each_entry(p, &clocks, node) { - printk(KERN_INFO " %s %ld", p->name, p->rate); + pr_info(" %s=%ld", p->name, p->rate); if (p->parent) - printk(KERN_INFO " %s %ld", p->parent->name, + pr_cont(" %s=%ld", p->parent->name, p->parent->rate); if (p->flags & CLK_HAS_CTRL) - printk(KERN_INFO " reg/bit %d/%d", p->reg, p->bit); - printk("\n"); + pr_cont(" reg/bit=%d/%d", p->reg, p->bit); + pr_cont("\n"); } mutex_unlock(&clocks_mutex); } -- cgit v1.1 From 9c93e596979021b159736a1273987c3e52d809e0 Mon Sep 17 00:00:00 2001 From: Paul Mundt <lethal@linux-sh.org> Date: Wed, 17 Jun 2009 16:34:45 +0900 Subject: sh: Generic HAVE_PERF_COUNTER support. This enables support for the generic software-based perf counters. Hardware counter support could be added in the future, but the lack of a performance counter IRQ makes this rather dubious. Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/Kconfig | 1 + arch/sh/include/asm/perf_counter.h | 7 +++++++ 2 files changed, 8 insertions(+) create mode 100644 arch/sh/include/asm/perf_counter.h (limited to 'arch') diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index a6f9eaa..e487e6d 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -15,6 +15,7 @@ config SUPERH select HAVE_IOREMAP_PROT if MMU select HAVE_ARCH_TRACEHOOK select HAVE_DMA_API_DEBUG + select HAVE_PERF_COUNTER select RTC_LIB select GENERIC_ATOMIC64 help diff --git a/arch/sh/include/asm/perf_counter.h b/arch/sh/include/asm/perf_counter.h new file mode 100644 index 0000000..a8153c2 --- /dev/null +++ b/arch/sh/include/asm/perf_counter.h @@ -0,0 +1,7 @@ +#ifndef __ASM_SH_PERF_COUNTER_H +#define __ASM_SH_PERF_COUNTER_H + +/* SH only supports software counters through this interface. */ +#define set_perf_counter_pending() do { } while (0) + +#endif /* __ASM_SH_PERF_COUNTER_H */ -- cgit v1.1 From 5713e602106545ff601c158d0864ce8e79de6d0a Mon Sep 17 00:00:00 2001 From: Paul Mundt <lethal@linux-sh.org> Date: Wed, 17 Jun 2009 18:20:48 +0900 Subject: sh: pci: Initial PCI-Express support for SH7786 Urquell board. This adds initial support for the PCI-Express module in the SH7786, particularly as it relates to the urquell platform. Presently it is only supported in root complex mode, with endpoint mode still requiring more debugging. 29/32-bit mode and lane configurations are selectable via board mode pins, and are otherwise fixed. Only 4x and 1x PCI channels are presently handled, the PCI bridge still requires additional debugging and stabilization in hardware. Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/boards/Kconfig | 1 + arch/sh/drivers/pci/Makefile | 1 + arch/sh/drivers/pci/pcie-sh7786.c | 355 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 357 insertions(+) create mode 100644 arch/sh/drivers/pci/pcie-sh7786.c (limited to 'arch') diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig index 1c91b1f..2b1af0e 100644 --- a/arch/sh/boards/Kconfig +++ b/arch/sh/boards/Kconfig @@ -175,6 +175,7 @@ config SH_URQUELL bool "Urquell" depends on CPU_SUBTYPE_SH7786 select ARCH_REQUIRE_GPIOLIB + select SYS_SUPPORTS_PCI config SH_MIGOR bool "Migo-R" diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile index d6303d0..08af1f4 100644 --- a/arch/sh/drivers/pci/Makefile +++ b/arch/sh/drivers/pci/Makefile @@ -25,3 +25,4 @@ obj-$(CONFIG_SH_TITAN) += fixups-titan.o obj-$(CONFIG_SH_LANDISK) += fixups-landisk.o obj-$(CONFIG_SH_LBOX_RE2) += fixups-rts7751r2d.o obj-$(CONFIG_SH_CAYMAN) += fixups-cayman.o +obj-$(CONFIG_SH_URQUELL) += pcie-sh7786.o diff --git a/arch/sh/drivers/pci/pcie-sh7786.c b/arch/sh/drivers/pci/pcie-sh7786.c new file mode 100644 index 0000000..ac37ee8 --- /dev/null +++ b/arch/sh/drivers/pci/pcie-sh7786.c @@ -0,0 +1,355 @@ +/* + * Low-Level PCI Express Support for the SH7786 + * + * Copyright (C) 2009 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/io.h> +#include <linux/delay.h> +#include "pcie-sh7786.h" +#include <asm/sizes.h> + +struct sh7786_pcie_port { + struct pci_channel *hose; + unsigned int index; + int endpoint; + int link; +}; + +static struct sh7786_pcie_port *sh7786_pcie_ports; +static unsigned int nr_ports; + +static struct sh7786_pcie_hwops { + int (*core_init)(void); + int (*port_init_hw)(struct sh7786_pcie_port *port); +} *sh7786_pcie_hwops; + +static struct resource sh7786_pci_32bit_mem_resources[] = { + { + .name = "pci0_mem", + .start = SH4A_PCIMEM_BASEA, + .end = SH4A_PCIMEM_BASEA + SZ_64M - 1, + .flags = IORESOURCE_MEM, + }, { + .name = "pci1_mem", + .start = SH4A_PCIMEM_BASEA1, + .end = SH4A_PCIMEM_BASEA1 + SZ_64M - 1, + .flags = IORESOURCE_MEM, + }, { + .name = "pci2_mem", + .start = SH4A_PCIMEM_BASEA2, + .end = SH4A_PCIMEM_BASEA2 + SZ_64M - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct resource sh7786_pci_29bit_mem_resource = { + .start = SH4A_PCIMEM_BASE, + .end = SH4A_PCIMEM_BASE + SZ_64M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct resource sh7786_pci_io_resources[] = { + { + .name = "pci0_io", + .start = SH4A_PCIIO_BASE, + .end = SH4A_PCIIO_BASE + SZ_8M - 1, + .flags = IORESOURCE_IO, + }, { + .name = "pci1_io", + .start = SH4A_PCIIO_BASE1, + .end = SH4A_PCIIO_BASE1 + SZ_8M - 1, + .flags = IORESOURCE_IO, + }, { + .name = "pci2_io", + .start = SH4A_PCIIO_BASE2, + .end = SH4A_PCIIO_BASE2 + SZ_4M - 1, + .flags = IORESOURCE_IO, + }, +}; + +extern struct pci_ops sh7786_pci_ops; + +#define DEFINE_CONTROLLER(start, idx) \ +{ \ + .pci_ops = &sh7786_pci_ops, \ + .reg_base = start, \ + /* mem_resource filled in at probe time */ \ + .mem_offset = 0, \ + .io_resource = &sh7786_pci_io_resources[idx], \ + .io_offset = 0, \ +} + +static struct pci_channel sh7786_pci_channels[] = { + DEFINE_CONTROLLER(0xfe000000, 0), + DEFINE_CONTROLLER(0xfe200000, 1), + DEFINE_CONTROLLER(0xfcc00000, 2), +}; + +static int phy_wait_for_ack(struct pci_channel *chan) +{ + unsigned int timeout = 100; + + while (timeout--) { + if (pci_read_reg(chan, SH4A_PCIEPHYADRR) & (1 << BITS_ACK)) + return 0; + + udelay(100); + } + + return -ETIMEDOUT; +} + +static int pci_wait_for_irq(struct pci_channel *chan, unsigned int mask) +{ + unsigned int timeout = 100; + + while (timeout--) { + if ((pci_read_reg(chan, SH4A_PCIEINTR) & mask) == mask) + return 0; + + udelay(100); + } + + return -ETIMEDOUT; +} + +static void phy_write_reg(struct pci_channel *chan, unsigned int addr, + unsigned int lane, unsigned int data) +{ + unsigned long phyaddr, ctrl; + + phyaddr = (1 << BITS_CMD) + ((lane & 0xf) << BITS_LANE) + + ((addr & 0xff) << BITS_ADR); + + /* Enable clock */ + ctrl = pci_read_reg(chan, SH4A_PCIEPHYCTLR); + ctrl |= (1 << BITS_CKE); + pci_write_reg(chan, ctrl, SH4A_PCIEPHYCTLR); + + /* Set write data */ + pci_write_reg(chan, data, SH4A_PCIEPHYDOUTR); + pci_write_reg(chan, phyaddr, SH4A_PCIEPHYADRR); + + phy_wait_for_ack(chan); + + /* Clear command */ + pci_write_reg(chan, 0, SH4A_PCIEPHYADRR); + + phy_wait_for_ack(chan); + + /* Disable clock */ + ctrl = pci_read_reg(chan, SH4A_PCIEPHYCTLR); + ctrl &= ~(1 << BITS_CKE); + pci_write_reg(chan, ctrl, SH4A_PCIEPHYCTLR); +} + +static int phy_init(struct pci_channel *chan) +{ + unsigned int timeout = 100; + + /* Initialize the phy */ + phy_write_reg(chan, 0x60, 0xf, 0x004b008b); + phy_write_reg(chan, 0x61, 0xf, 0x00007b41); + phy_write_reg(chan, 0x64, 0xf, 0x00ff4f00); + phy_write_reg(chan, 0x65, 0xf, 0x09070907); + phy_write_reg(chan, 0x66, 0xf, 0x00000010); + phy_write_reg(chan, 0x74, 0xf, 0x0007001c); + phy_write_reg(chan, 0x79, 0xf, 0x01fc000d); + + /* Deassert Standby */ + phy_write_reg(chan, 0x67, 0xf, 0x00000400); + + while (timeout--) { + if (pci_read_reg(chan, SH4A_PCIEPHYSR)) + return 0; + + udelay(100); + } + + return -ETIMEDOUT; +} + +static int pcie_init(struct sh7786_pcie_port *port) +{ + struct pci_channel *chan = port->hose; + unsigned int data; + int ret; + + /* Begin initialization */ + pci_write_reg(chan, 0, SH4A_PCIETCTLR); + + /* Initialize as type1. */ + data = pci_read_reg(chan, SH4A_PCIEPCICONF3); + data &= ~(0x7f << 16); + data |= PCI_HEADER_TYPE_BRIDGE << 16; + pci_write_reg(chan, data, SH4A_PCIEPCICONF3); + + /* Initialize default capabilities. */ + data = pci_read_reg(chan, SH4A_PCIEEXPCAP0); + data &= ~(PCI_EXP_FLAGS_TYPE << 16); + + if (port->endpoint) + data |= PCI_EXP_TYPE_ENDPOINT << 20; + else + data |= PCI_EXP_TYPE_ROOT_PORT << 20; + + data |= PCI_CAP_ID_EXP; + pci_write_reg(chan, data, SH4A_PCIEEXPCAP0); + + /* Enable x4 link width and extended sync. */ + data = pci_read_reg(chan, SH4A_PCIEEXPCAP4); + data &= ~(PCI_EXP_LNKSTA_NLW << 16); + data |= (1 << 22) | PCI_EXP_LNKCTL_ES; + pci_write_reg(chan, data, SH4A_PCIEEXPCAP4); + + /* Set the completion timer timeout to the maximum 32ms. */ + data = pci_read_reg(chan, SH4A_PCIETLCTLR); + data &= ~0xffff; + data |= 0x32 << 8; + pci_write_reg(chan, data, SH4A_PCIETLCTLR); + + /* + * Set fast training sequences to the maximum 255, + * and enable MAC data scrambling. + */ + data = pci_read_reg(chan, SH4A_PCIEMACCTLR); + data &= ~PCIEMACCTLR_SCR_DIS; + data |= (0xff << 16); + pci_write_reg(chan, data, SH4A_PCIEMACCTLR); + + /* Finish initialization */ + data = pci_read_reg(chan, SH4A_PCIETCTLR); + data |= 0x1; + pci_write_reg(chan, data, SH4A_PCIETCTLR); + + /* Enable DL_Active Interrupt generation */ + data = pci_read_reg(chan, SH4A_PCIEDLINTENR); + data |= PCIEDLINTENR_DLL_ACT_ENABLE; + pci_write_reg(chan, data, SH4A_PCIEDLINTENR); + + /* Disable MAC data scrambling. */ + data = pci_read_reg(chan, SH4A_PCIEMACCTLR); + data |= PCIEMACCTLR_SCR_DIS | (0xff << 16); + pci_write_reg(chan, data, SH4A_PCIEMACCTLR); + + ret = pci_wait_for_irq(chan, MASK_INT_TX_CTRL); + if (unlikely(ret != 0)) + return -ENODEV; + + pci_write_reg(chan, 0x00100007, SH4A_PCIEPCICONF1); + pci_write_reg(chan, 0x80888000, SH4A_PCIETXVC0DCTLR); + pci_write_reg(chan, 0x00222000, SH4A_PCIERXVC0DCTLR); + pci_write_reg(chan, 0x000050A0, SH4A_PCIEEXPCAP2); + + wmb(); + + data = pci_read_reg(chan, SH4A_PCIEMACSR); + printk(KERN_NOTICE "PCI: PCIe#%d link width %d\n", + port->index, (data >> 20) & 0x3f); + + pci_write_reg(chan, 0x007c0000, SH4A_PCIEPAMR0); + pci_write_reg(chan, 0x00000000, SH4A_PCIEPARH0); + pci_write_reg(chan, 0x00000000, SH4A_PCIEPARL0); + pci_write_reg(chan, 0x80000100, SH4A_PCIEPTCTLR0); + + pci_write_reg(chan, 0x03fc0000, SH4A_PCIEPAMR2); + pci_write_reg(chan, 0x00000000, SH4A_PCIEPARH2); + pci_write_reg(chan, 0x00000000, SH4A_PCIEPARL2); + pci_write_reg(chan, 0x80000000, SH4A_PCIEPTCTLR2); + + return 0; +} + +int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) +{ + return 71; +} + +static int sh7786_pcie_core_init(void) +{ + /* Return the number of ports */ + return test_mode_pin(MODE_PIN12) ? 3 : 2; +} + +static int __devinit sh7786_pcie_init_hw(struct sh7786_pcie_port *port) +{ + int ret; + + ret = phy_init(port->hose); + if (unlikely(ret < 0)) + return ret; + + /* + * Check if we are configured in endpoint or root complex mode, + * this is a fixed pin setting that applies to all PCIe ports. + */ + port->endpoint = test_mode_pin(MODE_PIN11); + + ret = pcie_init(port); + if (unlikely(ret < 0)) + return ret; + + register_pci_controller(port->hose); + + return 0; +} + +static struct sh7786_pcie_hwops sh7786_65nm_pcie_hwops __initdata = { + .core_init = sh7786_pcie_core_init, + .port_init_hw = sh7786_pcie_init_hw, +}; + +static int __init sh7786_pcie_init(void) +{ + int ret = 0, i; + + printk(KERN_NOTICE "PCI: Starting intialization.\n"); + + sh7786_pcie_hwops = &sh7786_65nm_pcie_hwops; + + nr_ports = sh7786_pcie_hwops->core_init(); + BUG_ON(nr_ports > ARRAY_SIZE(sh7786_pci_channels)); + + if (unlikely(nr_ports == 0)) + return -ENODEV; + + sh7786_pcie_ports = kzalloc(nr_ports * sizeof(struct sh7786_pcie_port), + GFP_KERNEL); + if (unlikely(!sh7786_pcie_ports)) + return -ENOMEM; + + printk(KERN_NOTICE "PCI: probing %d ports.\n", nr_ports); + + for (i = 0; i < nr_ports; i++) { + struct sh7786_pcie_port *port = sh7786_pcie_ports + i; + + port->index = i; + port->hose = sh7786_pci_channels + i; + port->hose->io_map_base = port->hose->io_resource->start; + + /* + * Check if we are booting in 29 or 32-bit mode + * + * 32-bit mode provides each controller with its own + * memory window, while 29-bit mode uses a shared one. + */ + port->hose->mem_resource = test_mode_pin(MODE_PIN10) ? + &sh7786_pci_32bit_mem_resources[i] : + &sh7786_pci_29bit_mem_resource; + + ret |= sh7786_pcie_hwops->port_init_hw(port); + } + + if (unlikely(ret)) + return ret; + + return 0; +} +arch_initcall(sh7786_pcie_init); -- cgit v1.1 From 39027ff07b572d5015f29a5bbbc36394f4e6f32e Mon Sep 17 00:00:00 2001 From: Ralf Baechle <ralf@linux-mips.org> Date: Fri, 12 Jun 2009 17:28:00 +0100 Subject: MIPS: Fix typo resulting in far too long ndelay times. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/include/asm/delay.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/include/asm/delay.h b/arch/mips/include/asm/delay.h index a07e51b..d2d8949 100644 --- a/arch/mips/include/asm/delay.h +++ b/arch/mips/include/asm/delay.h @@ -15,7 +15,7 @@ extern void __delay(unsigned int loops); extern void __ndelay(unsigned int ns); extern void __udelay(unsigned int us); -#define ndelay(ns) __udelay(ns) +#define ndelay(ns) __ndelay(ns) #define udelay(us) __udelay(us) /* make sure "usecs *= ..." in udelay do not overflow. */ -- cgit v1.1 From dbc1d911b4392982d5ec69eaed6b617758a148d9 Mon Sep 17 00:00:00 2001 From: Ralf Baechle <ralf@linux-mips.org> Date: Wed, 17 Jun 2009 11:06:24 +0100 Subject: MIPS: SMTC: Fix formatting difference to linux-mips.org code Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/kernel/smtc.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c index 5f5af7d..37d51cd 100644 --- a/arch/mips/kernel/smtc.c +++ b/arch/mips/kernel/smtc.c @@ -924,6 +924,7 @@ void ipi_decode(struct smtc_ipi *pipi) int irq = MIPS_CPU_IRQ_BASE + 1; smtc_ipi_nq(&freeIPIq, pipi); + switch (type_copy) { case SMTC_CLOCK_TICK: irq_enter(); -- cgit v1.1 From 3cb3a66cf7559d9c5d47ddf58481530b8943052f Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto <nemoto@toshiba-tops.co.jp> Date: Tue, 9 Jun 2009 11:12:48 +0900 Subject: MIPS: Fix __ndelay build error and add 'ull' suffix for 32-bit kernel Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/lib/delay.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/mips/lib/delay.c b/arch/mips/lib/delay.c index f69c6b5..6b3b1de9 100644 --- a/arch/mips/lib/delay.c +++ b/arch/mips/lib/delay.c @@ -43,7 +43,7 @@ void __udelay(unsigned long us) { unsigned int lpj = current_cpu_data.udelay_val; - __delay((us * 0x000010c7 * HZ * lpj) >> 32); + __delay((us * 0x000010c7ull * HZ * lpj) >> 32); } EXPORT_SYMBOL(__udelay); @@ -51,6 +51,6 @@ void __ndelay(unsigned long ns) { unsigned int lpj = current_cpu_data.udelay_val; - __delay((us * 0x00000005 * HZ * lpj) >> 32); + __delay((ns * 0x00000005ull * HZ * lpj) >> 32); } EXPORT_SYMBOL(__ndelay); -- cgit v1.1 From 7762f206a3f3a19a38ed91a3d87f019d8b4eafc1 Mon Sep 17 00:00:00 2001 From: Ralf Baechle <ralf@linux-mips.org> Date: Wed, 17 Jun 2009 11:06:24 +0100 Subject: MIPS: SB1250: Sort out merge mistake. A wrong resolution of a merge conflict made the recently deleted wrong error check in sb1250_set_affinity. Send the zombie back to the empire of the undead. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/sibyte/sb1250/irq.c | 5 ----- 1 file changed, 5 deletions(-) (limited to 'arch') diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c index 409dec7..5e7f201 100644 --- a/arch/mips/sibyte/sb1250/irq.c +++ b/arch/mips/sibyte/sb1250/irq.c @@ -111,11 +111,6 @@ static int sb1250_set_affinity(unsigned int irq, const struct cpumask *mask) i = cpumask_first(mask); - if (cpumask_weight(mask) > 1) { - printk("attempted to set irq affinity for irq %d to multiple CPUs\n", irq); - return -1; - } - /* Convert logical CPU to physical CPU */ cpu = cpu_logical_map(i); -- cgit v1.1 From d3f634b96a86521f51bbaf04a81e34e7adb0eeb4 Mon Sep 17 00:00:00 2001 From: Kevin Cernekee <cernekee@gmail.com> Date: Thu, 23 Apr 2009 17:03:43 -0700 Subject: MIPS: Add size and direction arguments to plat_unmap_dma_mem() Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h | 3 ++- arch/mips/include/asm/mach-generic/dma-coherence.h | 3 ++- arch/mips/include/asm/mach-ip27/dma-coherence.h | 3 ++- arch/mips/include/asm/mach-ip32/dma-coherence.h | 3 ++- arch/mips/include/asm/mach-jazz/dma-coherence.h | 3 ++- arch/mips/include/asm/mach-lemote/dma-coherence.h | 3 ++- arch/mips/mm/dma-default.c | 8 ++++---- 7 files changed, 16 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h b/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h index f30fce9..7289e67 100644 --- a/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h +++ b/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h @@ -35,7 +35,8 @@ static inline unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr) return dma_addr; } -static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr) +static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr, + size_t size, enum dma_data_direction direction) { octeon_unmap_dma_mem(dev, dma_addr); } diff --git a/arch/mips/include/asm/mach-generic/dma-coherence.h b/arch/mips/include/asm/mach-generic/dma-coherence.h index 36c611b..804c2de 100644 --- a/arch/mips/include/asm/mach-generic/dma-coherence.h +++ b/arch/mips/include/asm/mach-generic/dma-coherence.h @@ -28,7 +28,8 @@ static inline unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr) return dma_addr; } -static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr) +static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr, + size_t size, enum dma_data_direction direction) { } diff --git a/arch/mips/include/asm/mach-ip27/dma-coherence.h b/arch/mips/include/asm/mach-ip27/dma-coherence.h index 4c21bfc..8676673 100644 --- a/arch/mips/include/asm/mach-ip27/dma-coherence.h +++ b/arch/mips/include/asm/mach-ip27/dma-coherence.h @@ -38,7 +38,8 @@ static unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr) return dma_addr & ~(0xffUL << 56); } -static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr) +static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr, + size_t size, enum dma_data_direction direction) { } diff --git a/arch/mips/include/asm/mach-ip32/dma-coherence.h b/arch/mips/include/asm/mach-ip32/dma-coherence.h index 7ae40f4..d41805e 100644 --- a/arch/mips/include/asm/mach-ip32/dma-coherence.h +++ b/arch/mips/include/asm/mach-ip32/dma-coherence.h @@ -60,7 +60,8 @@ static unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr) return addr; } -static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr) +static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr, + size_t size, enum dma_data_direction direction) { } diff --git a/arch/mips/include/asm/mach-jazz/dma-coherence.h b/arch/mips/include/asm/mach-jazz/dma-coherence.h index 1c7cd27..5f3d7ea 100644 --- a/arch/mips/include/asm/mach-jazz/dma-coherence.h +++ b/arch/mips/include/asm/mach-jazz/dma-coherence.h @@ -27,7 +27,8 @@ static unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr) return vdma_log2phys(dma_addr); } -static void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr) +static void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr, + size_t size, enum dma_data_direction direction) { vdma_free(dma_addr); } diff --git a/arch/mips/include/asm/mach-lemote/dma-coherence.h b/arch/mips/include/asm/mach-lemote/dma-coherence.h index 38fad7d..c78f1d8 100644 --- a/arch/mips/include/asm/mach-lemote/dma-coherence.h +++ b/arch/mips/include/asm/mach-lemote/dma-coherence.h @@ -30,7 +30,8 @@ static inline unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr) return dma_addr & 0x7fffffff; } -static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr) +static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr, + size_t size, enum dma_data_direction direction) { } diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c index 4fdb7f5..30b108c 100644 --- a/arch/mips/mm/dma-default.c +++ b/arch/mips/mm/dma-default.c @@ -111,7 +111,7 @@ EXPORT_SYMBOL(dma_alloc_coherent); void dma_free_noncoherent(struct device *dev, size_t size, void *vaddr, dma_addr_t dma_handle) { - plat_unmap_dma_mem(dev, dma_handle); + plat_unmap_dma_mem(dev, dma_handle, size, DMA_BIDIRECTIONAL); free_pages((unsigned long) vaddr, get_order(size)); } @@ -122,7 +122,7 @@ void dma_free_coherent(struct device *dev, size_t size, void *vaddr, { unsigned long addr = (unsigned long) vaddr; - plat_unmap_dma_mem(dev, dma_handle); + plat_unmap_dma_mem(dev, dma_handle, size, DMA_BIDIRECTIONAL); if (!plat_device_is_coherent(dev)) addr = CAC_ADDR(addr); @@ -173,7 +173,7 @@ void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, __dma_sync(dma_addr_to_virt(dma_addr), size, direction); - plat_unmap_dma_mem(dev, dma_addr); + plat_unmap_dma_mem(dev, dma_addr, size, direction); } EXPORT_SYMBOL(dma_unmap_single); @@ -232,7 +232,7 @@ void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries, if (addr) __dma_sync(addr, sg->length, direction); } - plat_unmap_dma_mem(dev, sg->dma_address); + plat_unmap_dma_mem(dev, sg->dma_address, sg->length, direction); } } -- cgit v1.1 From 3807ef3f61e094c9417d1a12f18d6b3c8e27d96f Mon Sep 17 00:00:00 2001 From: Kevin Cernekee <cernekee@gmail.com> Date: Thu, 23 Apr 2009 17:25:12 -0700 Subject: MIPS: Pass struct device to plat_dma_addr_to_phys() Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h | 3 ++- arch/mips/include/asm/mach-generic/dma-coherence.h | 3 ++- arch/mips/include/asm/mach-ip27/dma-coherence.h | 3 ++- arch/mips/include/asm/mach-ip32/dma-coherence.h | 3 ++- arch/mips/include/asm/mach-jazz/dma-coherence.h | 3 ++- arch/mips/include/asm/mach-lemote/dma-coherence.h | 3 ++- arch/mips/mm/dma-default.c | 15 ++++++++------- 7 files changed, 20 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h b/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h index 7289e67..17d5794 100644 --- a/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h +++ b/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h @@ -30,7 +30,8 @@ static inline dma_addr_t plat_map_dma_mem_page(struct device *dev, return octeon_map_dma_mem(dev, page_address(page), PAGE_SIZE); } -static inline unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr) +static inline unsigned long plat_dma_addr_to_phys(struct device *dev, + dma_addr_t dma_addr) { return dma_addr; } diff --git a/arch/mips/include/asm/mach-generic/dma-coherence.h b/arch/mips/include/asm/mach-generic/dma-coherence.h index 804c2de..8da9807 100644 --- a/arch/mips/include/asm/mach-generic/dma-coherence.h +++ b/arch/mips/include/asm/mach-generic/dma-coherence.h @@ -23,7 +23,8 @@ static inline dma_addr_t plat_map_dma_mem_page(struct device *dev, return page_to_phys(page); } -static inline unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr) +static inline unsigned long plat_dma_addr_to_phys(struct device *dev, + dma_addr_t dma_addr) { return dma_addr; } diff --git a/arch/mips/include/asm/mach-ip27/dma-coherence.h b/arch/mips/include/asm/mach-ip27/dma-coherence.h index 8676673..d3d0401 100644 --- a/arch/mips/include/asm/mach-ip27/dma-coherence.h +++ b/arch/mips/include/asm/mach-ip27/dma-coherence.h @@ -33,7 +33,8 @@ static dma_addr_t plat_map_dma_mem_page(struct device *dev, struct page *page) return pa; } -static unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr) +static unsigned long plat_dma_addr_to_phys(struct device *dev, + dma_addr_t dma_addr) { return dma_addr & ~(0xffUL << 56); } diff --git a/arch/mips/include/asm/mach-ip32/dma-coherence.h b/arch/mips/include/asm/mach-ip32/dma-coherence.h index d41805e..3785595 100644 --- a/arch/mips/include/asm/mach-ip32/dma-coherence.h +++ b/arch/mips/include/asm/mach-ip32/dma-coherence.h @@ -50,7 +50,8 @@ static dma_addr_t plat_map_dma_mem_page(struct device *dev, struct page *page) } /* This is almost certainly wrong but it's what dma-ip32.c used to use */ -static unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr) +static unsigned long plat_dma_addr_to_phys(struct device *dev, + dma_addr_t dma_addr) { unsigned long addr = dma_addr & RAM_OFFSET_MASK; diff --git a/arch/mips/include/asm/mach-jazz/dma-coherence.h b/arch/mips/include/asm/mach-jazz/dma-coherence.h index 5f3d7ea..f93aee5 100644 --- a/arch/mips/include/asm/mach-jazz/dma-coherence.h +++ b/arch/mips/include/asm/mach-jazz/dma-coherence.h @@ -22,7 +22,8 @@ static dma_addr_t plat_map_dma_mem_page(struct device *dev, struct page *page) return vdma_alloc(page_to_phys(page), PAGE_SIZE); } -static unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr) +static unsigned long plat_dma_addr_to_phys(struct device *dev, + dma_addr_t dma_addr) { return vdma_log2phys(dma_addr); } diff --git a/arch/mips/include/asm/mach-lemote/dma-coherence.h b/arch/mips/include/asm/mach-lemote/dma-coherence.h index c78f1d8..c8de5e7 100644 --- a/arch/mips/include/asm/mach-lemote/dma-coherence.h +++ b/arch/mips/include/asm/mach-lemote/dma-coherence.h @@ -25,7 +25,8 @@ static inline dma_addr_t plat_map_dma_mem_page(struct device *dev, return page_to_phys(page) | 0x80000000; } -static inline unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr) +static inline unsigned long plat_dma_addr_to_phys(struct device *dev, + dma_addr_t dma_addr) { return dma_addr & 0x7fffffff; } diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c index 30b108c..7e48e76 100644 --- a/arch/mips/mm/dma-default.c +++ b/arch/mips/mm/dma-default.c @@ -20,9 +20,10 @@ #include <dma-coherence.h> -static inline unsigned long dma_addr_to_virt(dma_addr_t dma_addr) +static inline unsigned long dma_addr_to_virt(struct device *dev, + dma_addr_t dma_addr) { - unsigned long addr = plat_dma_addr_to_phys(dma_addr); + unsigned long addr = plat_dma_addr_to_phys(dev, dma_addr); return (unsigned long)phys_to_virt(addr); } @@ -170,7 +171,7 @@ void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, enum dma_data_direction direction) { if (cpu_is_noncoherent_r10000(dev)) - __dma_sync(dma_addr_to_virt(dma_addr), size, + __dma_sync(dma_addr_to_virt(dev, dma_addr), size, direction); plat_unmap_dma_mem(dev, dma_addr, size, direction); @@ -246,7 +247,7 @@ void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, if (cpu_is_noncoherent_r10000(dev)) { unsigned long addr; - addr = dma_addr_to_virt(dma_handle); + addr = dma_addr_to_virt(dev, dma_handle); __dma_sync(addr, size, direction); } } @@ -262,7 +263,7 @@ void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, if (!plat_device_is_coherent(dev)) { unsigned long addr; - addr = dma_addr_to_virt(dma_handle); + addr = dma_addr_to_virt(dev, dma_handle); __dma_sync(addr, size, direction); } } @@ -277,7 +278,7 @@ void dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle, if (cpu_is_noncoherent_r10000(dev)) { unsigned long addr; - addr = dma_addr_to_virt(dma_handle); + addr = dma_addr_to_virt(dev, dma_handle); __dma_sync(addr + offset, size, direction); } } @@ -293,7 +294,7 @@ void dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle, if (!plat_device_is_coherent(dev)) { unsigned long addr; - addr = dma_addr_to_virt(dma_handle); + addr = dma_addr_to_virt(dev, dma_handle); __dma_sync(addr + offset, size, direction); } } -- cgit v1.1 From 605b7ef7b79cee8e36ae5c48700e1a1eec74d38a Mon Sep 17 00:00:00 2001 From: Kevin Cernekee <cernekee@gmail.com> Date: Thu, 23 Apr 2009 17:36:53 -0700 Subject: MIPS: Support 64-byte D-cache line size Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/include/asm/r4kcache.h | 1 + arch/mips/mm/c-r4k.c | 12 ++++++++++++ 2 files changed, 13 insertions(+) (limited to 'arch') diff --git a/arch/mips/include/asm/r4kcache.h b/arch/mips/include/asm/r4kcache.h index 4c140db..387bf59 100644 --- a/arch/mips/include/asm/r4kcache.h +++ b/arch/mips/include/asm/r4kcache.h @@ -399,6 +399,7 @@ __BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16) __BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32) __BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32) __BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32) +__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 64) __BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64) __BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64) __BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128) diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index 171951d..71fe4cb 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -100,6 +100,12 @@ static inline void r4k_blast_dcache_page_dc32(unsigned long addr) blast_dcache32_page(addr); } +static inline void r4k_blast_dcache_page_dc64(unsigned long addr) +{ + R4600_HIT_CACHEOP_WAR_IMPL; + blast_dcache64_page(addr); +} + static void __cpuinit r4k_blast_dcache_page_setup(void) { unsigned long dc_lsize = cpu_dcache_line_size(); @@ -110,6 +116,8 @@ static void __cpuinit r4k_blast_dcache_page_setup(void) r4k_blast_dcache_page = blast_dcache16_page; else if (dc_lsize == 32) r4k_blast_dcache_page = r4k_blast_dcache_page_dc32; + else if (dc_lsize == 64) + r4k_blast_dcache_page = r4k_blast_dcache_page_dc64; } static void (* r4k_blast_dcache_page_indexed)(unsigned long addr); @@ -124,6 +132,8 @@ static void __cpuinit r4k_blast_dcache_page_indexed_setup(void) r4k_blast_dcache_page_indexed = blast_dcache16_page_indexed; else if (dc_lsize == 32) r4k_blast_dcache_page_indexed = blast_dcache32_page_indexed; + else if (dc_lsize == 64) + r4k_blast_dcache_page_indexed = blast_dcache64_page_indexed; } static void (* r4k_blast_dcache)(void); @@ -138,6 +148,8 @@ static void __cpuinit r4k_blast_dcache_setup(void) r4k_blast_dcache = blast_dcache16; else if (dc_lsize == 32) r4k_blast_dcache = blast_dcache32; + else if (dc_lsize == 64) + r4k_blast_dcache = blast_dcache64; } /* force code alignment (used for TX49XX_ICACHE_INDEX_INV_WAR) */ -- cgit v1.1 From a43da03ca4719276b9601730627d20b2a71fb6ba Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Date: Fri, 24 Apr 2009 00:10:36 +0900 Subject: MIPS: TXx9: micro optimization for clocksource and clock_event Use container structure for clocksource, clock_event_device and hold a pointer to txx9_tmr_reg in it. This saves a few instructions in clocksource and clock_event handlers. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/kernel/cevt-txx9.c | 67 ++++++++++++++++++++++++++++---------------- 1 file changed, 43 insertions(+), 24 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/cevt-txx9.c b/arch/mips/kernel/cevt-txx9.c index 2e911e3..0037f21 100644 --- a/arch/mips/kernel/cevt-txx9.c +++ b/arch/mips/kernel/cevt-txx9.c @@ -20,22 +20,29 @@ #define TIMER_CCD 0 /* 1/2 */ #define TIMER_CLK(imclk) ((imclk) / (2 << TIMER_CCD)) -static struct txx9_tmr_reg __iomem *txx9_cs_tmrptr; +struct txx9_clocksource { + struct clocksource cs; + struct txx9_tmr_reg __iomem *tmrptr; +}; static cycle_t txx9_cs_read(struct clocksource *cs) { - return __raw_readl(&txx9_cs_tmrptr->trr); + struct txx9_clocksource *txx9_cs = + container_of(cs, struct txx9_clocksource, cs); + return __raw_readl(&txx9_cs->tmrptr->trr); } /* Use 1 bit smaller width to use full bits in that width */ #define TXX9_CLOCKSOURCE_BITS (TXX9_TIMER_BITS - 1) -static struct clocksource txx9_clocksource = { - .name = "TXx9", - .rating = 200, - .read = txx9_cs_read, - .mask = CLOCKSOURCE_MASK(TXX9_CLOCKSOURCE_BITS), - .flags = CLOCK_SOURCE_IS_CONTINUOUS, +static struct txx9_clocksource txx9_clocksource = { + .cs = { + .name = "TXx9", + .rating = 200, + .read = txx9_cs_read, + .mask = CLOCKSOURCE_MASK(TXX9_CLOCKSOURCE_BITS), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, + }, }; void __init txx9_clocksource_init(unsigned long baseaddr, @@ -43,8 +50,8 @@ void __init txx9_clocksource_init(unsigned long baseaddr, { struct txx9_tmr_reg __iomem *tmrptr; - clocksource_set_clock(&txx9_clocksource, TIMER_CLK(imbusclk)); - clocksource_register(&txx9_clocksource); + clocksource_set_clock(&txx9_clocksource.cs, TIMER_CLK(imbusclk)); + clocksource_register(&txx9_clocksource.cs); tmrptr = ioremap(baseaddr, sizeof(struct txx9_tmr_reg)); __raw_writel(TCR_BASE, &tmrptr->tcr); @@ -53,10 +60,13 @@ void __init txx9_clocksource_init(unsigned long baseaddr, __raw_writel(TXx9_TMITMR_TZCE, &tmrptr->itmr); __raw_writel(1 << TXX9_CLOCKSOURCE_BITS, &tmrptr->cpra); __raw_writel(TCR_BASE | TXx9_TMTCR_TCE, &tmrptr->tcr); - txx9_cs_tmrptr = tmrptr; + txx9_clocksource.tmrptr = tmrptr; } -static struct txx9_tmr_reg __iomem *txx9_tmrptr; +struct txx9_clock_event_device { + struct clock_event_device cd; + struct txx9_tmr_reg __iomem *tmrptr; +}; static void txx9tmr_stop_and_clear(struct txx9_tmr_reg __iomem *tmrptr) { @@ -69,7 +79,9 @@ static void txx9tmr_stop_and_clear(struct txx9_tmr_reg __iomem *tmrptr) static void txx9tmr_set_mode(enum clock_event_mode mode, struct clock_event_device *evt) { - struct txx9_tmr_reg __iomem *tmrptr = txx9_tmrptr; + struct txx9_clock_event_device *txx9_cd = + container_of(evt, struct txx9_clock_event_device, cd); + struct txx9_tmr_reg __iomem *tmrptr = txx9_cd->tmrptr; txx9tmr_stop_and_clear(tmrptr); switch (mode) { @@ -99,7 +111,9 @@ static void txx9tmr_set_mode(enum clock_event_mode mode, static int txx9tmr_set_next_event(unsigned long delta, struct clock_event_device *evt) { - struct txx9_tmr_reg __iomem *tmrptr = txx9_tmrptr; + struct txx9_clock_event_device *txx9_cd = + container_of(evt, struct txx9_clock_event_device, cd); + struct txx9_tmr_reg __iomem *tmrptr = txx9_cd->tmrptr; txx9tmr_stop_and_clear(tmrptr); /* start timer */ @@ -108,18 +122,22 @@ static int txx9tmr_set_next_event(unsigned long delta, return 0; } -static struct clock_event_device txx9tmr_clock_event_device = { - .name = "TXx9", - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .rating = 200, - .set_mode = txx9tmr_set_mode, - .set_next_event = txx9tmr_set_next_event, +static struct txx9_clock_event_device txx9_clock_event_device = { + .cd = { + .name = "TXx9", + .features = CLOCK_EVT_FEAT_PERIODIC | + CLOCK_EVT_FEAT_ONESHOT, + .rating = 200, + .set_mode = txx9tmr_set_mode, + .set_next_event = txx9tmr_set_next_event, + }, }; static irqreturn_t txx9tmr_interrupt(int irq, void *dev_id) { - struct clock_event_device *cd = &txx9tmr_clock_event_device; - struct txx9_tmr_reg __iomem *tmrptr = txx9_tmrptr; + struct txx9_clock_event_device *txx9_cd = dev_id; + struct clock_event_device *cd = &txx9_cd->cd; + struct txx9_tmr_reg __iomem *tmrptr = txx9_cd->tmrptr; __raw_writel(0, &tmrptr->tisr); /* ack interrupt */ cd->event_handler(cd); @@ -130,19 +148,20 @@ static struct irqaction txx9tmr_irq = { .handler = txx9tmr_interrupt, .flags = IRQF_DISABLED | IRQF_PERCPU, .name = "txx9tmr", + .dev_id = &txx9_clock_event_device, }; void __init txx9_clockevent_init(unsigned long baseaddr, int irq, unsigned int imbusclk) { - struct clock_event_device *cd = &txx9tmr_clock_event_device; + struct clock_event_device *cd = &txx9_clock_event_device.cd; struct txx9_tmr_reg __iomem *tmrptr; tmrptr = ioremap(baseaddr, sizeof(struct txx9_tmr_reg)); txx9tmr_stop_and_clear(tmrptr); __raw_writel(TIMER_CCD, &tmrptr->ccdr); __raw_writel(0, &tmrptr->itmr); - txx9_tmrptr = tmrptr; + txx9_clock_event_device.tmrptr = tmrptr; clockevent_set_clock(cd, TIMER_CLK(imbusclk)); cd->max_delta_ns = -- cgit v1.1 From ea76f0b3759283ec3cc06c86e266bf0fa6a981d2 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Date: Thu, 23 Apr 2009 00:40:30 +0900 Subject: DMA: TXx9 Soc DMA Controller driver This patch adds support for the integrated DMAC of the TXx9 family. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/include/asm/txx9/dmac.h | 48 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 48 insertions(+) create mode 100644 arch/mips/include/asm/txx9/dmac.h (limited to 'arch') diff --git a/arch/mips/include/asm/txx9/dmac.h b/arch/mips/include/asm/txx9/dmac.h new file mode 100644 index 0000000..a87d1c3 --- /dev/null +++ b/arch/mips/include/asm/txx9/dmac.h @@ -0,0 +1,48 @@ +/* + * TXx9 SoC DMA Controller + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_TXX9_DMAC_H +#define __ASM_TXX9_DMAC_H + +#include <linux/dmaengine.h> + +#define TXX9_DMA_MAX_NR_CHANNELS 4 + +/** + * struct txx9dmac_platform_data - Controller configuration parameters + * @memcpy_chan: Channel used for DMA_MEMCPY + * @have_64bit_regs: DMAC have 64 bit registers + */ +struct txx9dmac_platform_data { + int memcpy_chan; + bool have_64bit_regs; +}; + +/** + * struct txx9dmac_chan_platform_data - Channel configuration parameters + * @dmac_dev: A platform device for DMAC + */ +struct txx9dmac_chan_platform_data { + struct platform_device *dmac_dev; +}; + +/** + * struct txx9dmac_slave - Controller-specific information about a slave + * @tx_reg: physical address of data register used for + * memory-to-peripheral transfers + * @rx_reg: physical address of data register used for + * peripheral-to-memory transfers + * @reg_width: peripheral register width + */ +struct txx9dmac_slave { + u64 tx_reg; + u64 rx_reg; + unsigned int reg_width; +}; + +#endif /* __ASM_TXX9_DMAC_H */ -- cgit v1.1 From f48c8c958a2d39f13dace880d15a6e711aafe577 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Date: Thu, 23 Apr 2009 00:40:31 +0900 Subject: MIPS: TXx9: Add DMAC support Add platform support for DMAC of TXx9 SoCs. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/include/asm/txx9/dmac.h | 3 ++ arch/mips/include/asm/txx9/tx4927.h | 2 ++ arch/mips/include/asm/txx9/tx4938.h | 1 + arch/mips/include/asm/txx9/tx4939.h | 1 + arch/mips/txx9/generic/setup.c | 55 +++++++++++++++++++++++++++++++++++ arch/mips/txx9/generic/setup_tx4927.c | 12 ++++++++ arch/mips/txx9/generic/setup_tx4938.c | 21 +++++++++---- arch/mips/txx9/generic/setup_tx4939.c | 21 +++++++++---- arch/mips/txx9/rbtx4927/setup.c | 4 +++ arch/mips/txx9/rbtx4938/setup.c | 1 + arch/mips/txx9/rbtx4939/setup.c | 1 + 11 files changed, 112 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/mips/include/asm/txx9/dmac.h b/arch/mips/include/asm/txx9/dmac.h index a87d1c3..5e9151f 100644 --- a/arch/mips/include/asm/txx9/dmac.h +++ b/arch/mips/include/asm/txx9/dmac.h @@ -45,4 +45,7 @@ struct txx9dmac_slave { unsigned int reg_width; }; +void txx9_dmac_init(int id, unsigned long baseaddr, int irq, + const struct txx9dmac_platform_data *pdata); + #endif /* __ASM_TXX9_DMAC_H */ diff --git a/arch/mips/include/asm/txx9/tx4927.h b/arch/mips/include/asm/txx9/tx4927.h index 7d813f1..d92ae07 100644 --- a/arch/mips/include/asm/txx9/tx4927.h +++ b/arch/mips/include/asm/txx9/tx4927.h @@ -41,6 +41,7 @@ #define TX4927_SDRAMC_REG (TX4927_REG_BASE + 0x8000) #define TX4927_EBUSC_REG (TX4927_REG_BASE + 0x9000) +#define TX4927_DMA_REG (TX4927_REG_BASE + 0xb000) #define TX4927_PCIC_REG (TX4927_REG_BASE + 0xd000) #define TX4927_CCFG_REG (TX4927_REG_BASE + 0xe000) #define TX4927_IRC_REG (TX4927_REG_BASE + 0xf600) @@ -265,5 +266,6 @@ int tx4927_pciclk66_setup(void); void tx4927_setup_pcierr_irq(void); void tx4927_irq_init(void); void tx4927_mtd_init(int ch); +void tx4927_dmac_init(int memcpy_chan); #endif /* __ASM_TXX9_TX4927_H */ diff --git a/arch/mips/include/asm/txx9/tx4938.h b/arch/mips/include/asm/txx9/tx4938.h index cd8bc20..0758a0c 100644 --- a/arch/mips/include/asm/txx9/tx4938.h +++ b/arch/mips/include/asm/txx9/tx4938.h @@ -305,5 +305,6 @@ struct tx4938ide_platform_info { }; void tx4938_ata_init(unsigned int irq, unsigned int shift, int tune); +void tx4938_dmac_init(int memcpy_chan0, int memcpy_chan1); #endif diff --git a/arch/mips/include/asm/txx9/tx4939.h b/arch/mips/include/asm/txx9/tx4939.h index f02c50b..1be9798 100644 --- a/arch/mips/include/asm/txx9/tx4939.h +++ b/arch/mips/include/asm/txx9/tx4939.h @@ -544,5 +544,6 @@ void tx4939_ata_init(void); void tx4939_rtc_init(void); void tx4939_ndfmc_init(unsigned int hold, unsigned int spw, unsigned char ch_mask, unsigned char wide_mask); +void tx4939_dmac_init(int memcpy_chan0, int memcpy_chan1); #endif /* __ASM_TXX9_TX4939_H */ diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c index 8a266c6..369d863 100644 --- a/arch/mips/txx9/generic/setup.c +++ b/arch/mips/txx9/generic/setup.c @@ -33,6 +33,7 @@ #include <asm/txx9/pci.h> #include <asm/txx9tmr.h> #include <asm/txx9/ndfmc.h> +#include <asm/txx9/dmac.h> #ifdef CONFIG_CPU_TX49XX #include <asm/txx9/tx4938.h> #endif @@ -821,3 +822,57 @@ void __init txx9_iocled_init(unsigned long baseaddr, { } #endif /* CONFIG_LEDS_GPIO */ + +void __init txx9_dmac_init(int id, unsigned long baseaddr, int irq, + const struct txx9dmac_platform_data *pdata) +{ +#if defined(CONFIG_TXX9_DMAC) || defined(CONFIG_TXX9_DMAC_MODULE) + struct resource res[] = { + { + .start = baseaddr, + .end = baseaddr + 0x800 - 1, + .flags = IORESOURCE_MEM, +#ifndef CONFIG_MACH_TX49XX + }, { + .start = irq, + .flags = IORESOURCE_IRQ, +#endif + } + }; +#ifdef CONFIG_MACH_TX49XX + struct resource chan_res[] = { + { + .flags = IORESOURCE_IRQ, + } + }; +#endif + struct platform_device *pdev = platform_device_alloc("txx9dmac", id); + struct txx9dmac_chan_platform_data cpdata; + int i; + + if (!pdev || + platform_device_add_resources(pdev, res, ARRAY_SIZE(res)) || + platform_device_add_data(pdev, pdata, sizeof(*pdata)) || + platform_device_add(pdev)) { + platform_device_put(pdev); + return; + } + memset(&cpdata, 0, sizeof(cpdata)); + cpdata.dmac_dev = pdev; + for (i = 0; i < TXX9_DMA_MAX_NR_CHANNELS; i++) { +#ifdef CONFIG_MACH_TX49XX + chan_res[0].start = irq + i; +#endif + pdev = platform_device_alloc("txx9dmac-chan", + id * TXX9_DMA_MAX_NR_CHANNELS + i); + if (!pdev || +#ifdef CONFIG_MACH_TX49XX + platform_device_add_resources(pdev, chan_res, + ARRAY_SIZE(chan_res)) || +#endif + platform_device_add_data(pdev, &cpdata, sizeof(cpdata)) || + platform_device_add(pdev)) + platform_device_put(pdev); + } +#endif +} diff --git a/arch/mips/txx9/generic/setup_tx4927.c b/arch/mips/txx9/generic/setup_tx4927.c index 1093549..6b681cd 100644 --- a/arch/mips/txx9/generic/setup_tx4927.c +++ b/arch/mips/txx9/generic/setup_tx4927.c @@ -22,6 +22,7 @@ #include <asm/txx9tmr.h> #include <asm/txx9pio.h> #include <asm/txx9/generic.h> +#include <asm/txx9/dmac.h> #include <asm/txx9/tx4927.h> static void __init tx4927_wdr_init(void) @@ -253,6 +254,17 @@ void __init tx4927_mtd_init(int ch) txx9_physmap_flash_init(ch, start, size, &pdata); } +void __init tx4927_dmac_init(int memcpy_chan) +{ + struct txx9dmac_platform_data plat_data = { + .memcpy_chan = memcpy_chan, + .have_64bit_regs = true, + }; + + txx9_dmac_init(0, TX4927_DMA_REG & 0xfffffffffULL, + TXX9_IRQ_BASE + TX4927_IR_DMA(0), &plat_data); +} + static void __init tx4927_stop_unused_modules(void) { __u64 pcfg, rst = 0, ckd = 0; diff --git a/arch/mips/txx9/generic/setup_tx4938.c b/arch/mips/txx9/generic/setup_tx4938.c index 3925219..b2b8529 100644 --- a/arch/mips/txx9/generic/setup_tx4938.c +++ b/arch/mips/txx9/generic/setup_tx4938.c @@ -24,6 +24,7 @@ #include <asm/txx9pio.h> #include <asm/txx9/generic.h> #include <asm/txx9/ndfmc.h> +#include <asm/txx9/dmac.h> #include <asm/txx9/tx4938.h> static void __init tx4938_wdr_init(void) @@ -239,11 +240,6 @@ void __init tx4938_setup(void) for (i = 0; i < TX4938_NR_TMR; i++) txx9_tmr_init(TX4938_TMR_REG(i) & 0xfffffffffULL); - /* DMA */ - for (i = 0; i < 2; i++) - ____raw_writeq(TX4938_DMA_MCR_MSTEN, - (void __iomem *)(TX4938_DMA_REG(i) + 0x50)); - /* PIO */ txx9_gpio_init(TX4938_PIO_REG & 0xfffffffffULL, 0, TX4938_NUM_PIO); __raw_writel(0, &tx4938_pioptr->maskcpu); @@ -403,6 +399,21 @@ void __init tx4938_ndfmc_init(unsigned int hold, unsigned int spw) txx9_ndfmc_init(baseaddr, &plat_data); } +void __init tx4938_dmac_init(int memcpy_chan0, int memcpy_chan1) +{ + struct txx9dmac_platform_data plat_data = { + .have_64bit_regs = true, + }; + int i; + + for (i = 0; i < 2; i++) { + plat_data.memcpy_chan = i ? memcpy_chan1 : memcpy_chan0; + txx9_dmac_init(i, TX4938_DMA_REG(i) & 0xfffffffffULL, + TXX9_IRQ_BASE + TX4938_IR_DMA(i, 0), + &plat_data); + } +} + static void __init tx4938_stop_unused_modules(void) { __u64 pcfg, rst = 0, ckd = 0; diff --git a/arch/mips/txx9/generic/setup_tx4939.c b/arch/mips/txx9/generic/setup_tx4939.c index c2bf150..98effef 100644 --- a/arch/mips/txx9/generic/setup_tx4939.c +++ b/arch/mips/txx9/generic/setup_tx4939.c @@ -28,6 +28,7 @@ #include <asm/txx9tmr.h> #include <asm/txx9/generic.h> #include <asm/txx9/ndfmc.h> +#include <asm/txx9/dmac.h> #include <asm/txx9/tx4939.h> static void __init tx4939_wdr_init(void) @@ -259,11 +260,6 @@ void __init tx4939_setup(void) for (i = 0; i < TX4939_NR_TMR; i++) txx9_tmr_init(TX4939_TMR_REG(i) & 0xfffffffffULL); - /* DMA */ - for (i = 0; i < 2; i++) - ____raw_writeq(TX4938_DMA_MCR_MSTEN, - (void __iomem *)(TX4939_DMA_REG(i) + 0x50)); - /* set PCIC1 reset (required to prevent hangup on BIST) */ txx9_set64(&tx4939_ccfgptr->clkctr, TX4939_CLKCTR_PCI1RST); pcfg = ____raw_readq(&tx4939_ccfgptr->pcfg); @@ -474,6 +470,21 @@ void __init tx4939_ndfmc_init(unsigned int hold, unsigned int spw, txx9_ndfmc_init(TX4939_NDFMC_REG & 0xfffffffffULL, &plat_data); } +void __init tx4939_dmac_init(int memcpy_chan0, int memcpy_chan1) +{ + struct txx9dmac_platform_data plat_data = { + .have_64bit_regs = true, + }; + int i; + + for (i = 0; i < 2; i++) { + plat_data.memcpy_chan = i ? memcpy_chan1 : memcpy_chan0; + txx9_dmac_init(i, TX4939_DMA_REG(i) & 0xfffffffffULL, + TXX9_IRQ_BASE + TX4939_IR_DMA(i, 0), + &plat_data); + } +} + static void __init tx4939_stop_unused_modules(void) { __u64 pcfg, rst = 0, ckd = 0; diff --git a/arch/mips/txx9/rbtx4927/setup.c b/arch/mips/txx9/rbtx4927/setup.c index 01129a9..332cdbc 100644 --- a/arch/mips/txx9/rbtx4927/setup.c +++ b/arch/mips/txx9/rbtx4927/setup.c @@ -337,6 +337,10 @@ static void __init rbtx4927_device_init(void) rbtx4927_ne_init(); tx4927_wdt_init(); rbtx4927_mtd_init(); + if (TX4927_REV_PCODE() == 0x4927) + tx4927_dmac_init(2); + else + tx4938_dmac_init(0, 2); txx9_iocled_init(RBTX4927_LED_ADDR - IO_BASE, -1, 3, 1, "green", NULL); rbtx4927_gpioled_init(); } diff --git a/arch/mips/txx9/rbtx4938/setup.c b/arch/mips/txx9/rbtx4938/setup.c index 65d13df..37c5e3d 100644 --- a/arch/mips/txx9/rbtx4938/setup.c +++ b/arch/mips/txx9/rbtx4938/setup.c @@ -355,6 +355,7 @@ static void __init rbtx4938_device_init(void) /* TC58DVM82A1FT: tDH=10ns, tWP=tRP=tREADID=35ns */ tx4938_ndfmc_init(10, 35); tx4938_ata_init(RBTX4938_IRQ_IOC_ATA, 0, 1); + tx4938_dmac_init(0, 2); txx9_iocled_init(RBTX4938_LED_ADDR - IO_BASE, -1, 8, 1, "green", NULL); } diff --git a/arch/mips/txx9/rbtx4939/setup.c b/arch/mips/txx9/rbtx4939/setup.c index 4199c6f..91f2ec8 100644 --- a/arch/mips/txx9/rbtx4939/setup.c +++ b/arch/mips/txx9/rbtx4939/setup.c @@ -498,6 +498,7 @@ static void __init rbtx4939_device_init(void) tx4939_wdt_init(); tx4939_ata_init(); tx4939_rtc_init(); + tx4939_dmac_init(0, 2); } static void __init rbtx4939_setup(void) -- cgit v1.1 From 8860fb8210b06720d5fe3c23b2803a211c26feb1 Mon Sep 17 00:00:00 2001 From: David Daney <ddaney@caviumnetworks.com> Date: Thu, 23 Apr 2009 17:44:37 -0700 Subject: MIPS: Add register definitions for PCI. Here we add the register definitions for the processor blocks used by the following PCI support patch. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/include/asm/octeon/cvmx-npei-defs.h | 2560 ++++++++++++++++++++++ arch/mips/include/asm/octeon/cvmx-npi-defs.h | 1735 +++++++++++++++ arch/mips/include/asm/octeon/cvmx-pci-defs.h | 1645 ++++++++++++++ arch/mips/include/asm/octeon/cvmx-pcieep-defs.h | 1365 ++++++++++++ arch/mips/include/asm/octeon/cvmx-pciercx-defs.h | 1397 ++++++++++++ arch/mips/include/asm/octeon/cvmx-pescx-defs.h | 410 ++++ arch/mips/include/asm/octeon/cvmx-pexp-defs.h | 229 ++ 7 files changed, 9341 insertions(+) create mode 100644 arch/mips/include/asm/octeon/cvmx-npei-defs.h create mode 100644 arch/mips/include/asm/octeon/cvmx-npi-defs.h create mode 100644 arch/mips/include/asm/octeon/cvmx-pci-defs.h create mode 100644 arch/mips/include/asm/octeon/cvmx-pcieep-defs.h create mode 100644 arch/mips/include/asm/octeon/cvmx-pciercx-defs.h create mode 100644 arch/mips/include/asm/octeon/cvmx-pescx-defs.h create mode 100644 arch/mips/include/asm/octeon/cvmx-pexp-defs.h (limited to 'arch') diff --git a/arch/mips/include/asm/octeon/cvmx-npei-defs.h b/arch/mips/include/asm/octeon/cvmx-npei-defs.h new file mode 100644 index 0000000..4b347bb --- /dev/null +++ b/arch/mips/include/asm/octeon/cvmx-npei-defs.h @@ -0,0 +1,2560 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +#ifndef __CVMX_NPEI_DEFS_H__ +#define __CVMX_NPEI_DEFS_H__ + +#define CVMX_NPEI_BAR1_INDEXX(offset) \ + (0x0000000000000000ull + (((offset) & 31) * 16)) +#define CVMX_NPEI_BIST_STATUS \ + (0x0000000000000580ull) +#define CVMX_NPEI_BIST_STATUS2 \ + (0x0000000000000680ull) +#define CVMX_NPEI_CTL_PORT0 \ + (0x0000000000000250ull) +#define CVMX_NPEI_CTL_PORT1 \ + (0x0000000000000260ull) +#define CVMX_NPEI_CTL_STATUS \ + (0x0000000000000570ull) +#define CVMX_NPEI_CTL_STATUS2 \ + (0x0000000000003C00ull) +#define CVMX_NPEI_DATA_OUT_CNT \ + (0x00000000000005F0ull) +#define CVMX_NPEI_DBG_DATA \ + (0x0000000000000510ull) +#define CVMX_NPEI_DBG_SELECT \ + (0x0000000000000500ull) +#define CVMX_NPEI_DMA0_INT_LEVEL \ + (0x00000000000005C0ull) +#define CVMX_NPEI_DMA1_INT_LEVEL \ + (0x00000000000005D0ull) +#define CVMX_NPEI_DMAX_COUNTS(offset) \ + (0x0000000000000450ull + (((offset) & 7) * 16)) +#define CVMX_NPEI_DMAX_DBELL(offset) \ + (0x00000000000003B0ull + (((offset) & 7) * 16)) +#define CVMX_NPEI_DMAX_IBUFF_SADDR(offset) \ + (0x0000000000000400ull + (((offset) & 7) * 16)) +#define CVMX_NPEI_DMAX_NADDR(offset) \ + (0x00000000000004A0ull + (((offset) & 7) * 16)) +#define CVMX_NPEI_DMA_CNTS \ + (0x00000000000005E0ull) +#define CVMX_NPEI_DMA_CONTROL \ + (0x00000000000003A0ull) +#define CVMX_NPEI_INT_A_ENB \ + (0x0000000000000560ull) +#define CVMX_NPEI_INT_A_ENB2 \ + (0x0000000000003CE0ull) +#define CVMX_NPEI_INT_A_SUM \ + (0x0000000000000550ull) +#define CVMX_NPEI_INT_ENB \ + (0x0000000000000540ull) +#define CVMX_NPEI_INT_ENB2 \ + (0x0000000000003CD0ull) +#define CVMX_NPEI_INT_INFO \ + (0x0000000000000590ull) +#define CVMX_NPEI_INT_SUM \ + (0x0000000000000530ull) +#define CVMX_NPEI_INT_SUM2 \ + (0x0000000000003CC0ull) +#define CVMX_NPEI_LAST_WIN_RDATA0 \ + (0x0000000000000600ull) +#define CVMX_NPEI_LAST_WIN_RDATA1 \ + (0x0000000000000610ull) +#define CVMX_NPEI_MEM_ACCESS_CTL \ + (0x00000000000004F0ull) +#define CVMX_NPEI_MEM_ACCESS_SUBIDX(offset) \ + (0x0000000000000340ull + (((offset) & 31) * 16) - 16 * 12) +#define CVMX_NPEI_MSI_ENB0 \ + (0x0000000000003C50ull) +#define CVMX_NPEI_MSI_ENB1 \ + (0x0000000000003C60ull) +#define CVMX_NPEI_MSI_ENB2 \ + (0x0000000000003C70ull) +#define CVMX_NPEI_MSI_ENB3 \ + (0x0000000000003C80ull) +#define CVMX_NPEI_MSI_RCV0 \ + (0x0000000000003C10ull) +#define CVMX_NPEI_MSI_RCV1 \ + (0x0000000000003C20ull) +#define CVMX_NPEI_MSI_RCV2 \ + (0x0000000000003C30ull) +#define CVMX_NPEI_MSI_RCV3 \ + (0x0000000000003C40ull) +#define CVMX_NPEI_MSI_RD_MAP \ + (0x0000000000003CA0ull) +#define CVMX_NPEI_MSI_W1C_ENB0 \ + (0x0000000000003CF0ull) +#define CVMX_NPEI_MSI_W1C_ENB1 \ + (0x0000000000003D00ull) +#define CVMX_NPEI_MSI_W1C_ENB2 \ + (0x0000000000003D10ull) +#define CVMX_NPEI_MSI_W1C_ENB3 \ + (0x0000000000003D20ull) +#define CVMX_NPEI_MSI_W1S_ENB0 \ + (0x0000000000003D30ull) +#define CVMX_NPEI_MSI_W1S_ENB1 \ + (0x0000000000003D40ull) +#define CVMX_NPEI_MSI_W1S_ENB2 \ + (0x0000000000003D50ull) +#define CVMX_NPEI_MSI_W1S_ENB3 \ + (0x0000000000003D60ull) +#define CVMX_NPEI_MSI_WR_MAP \ + (0x0000000000003C90ull) +#define CVMX_NPEI_PCIE_CREDIT_CNT \ + (0x0000000000003D70ull) +#define CVMX_NPEI_PCIE_MSI_RCV \ + (0x0000000000003CB0ull) +#define CVMX_NPEI_PCIE_MSI_RCV_B1 \ + (0x0000000000000650ull) +#define CVMX_NPEI_PCIE_MSI_RCV_B2 \ + (0x0000000000000660ull) +#define CVMX_NPEI_PCIE_MSI_RCV_B3 \ + (0x0000000000000670ull) +#define CVMX_NPEI_PKTX_CNTS(offset) \ + (0x0000000000002400ull + (((offset) & 31) * 16)) +#define CVMX_NPEI_PKTX_INSTR_BADDR(offset) \ + (0x0000000000002800ull + (((offset) & 31) * 16)) +#define CVMX_NPEI_PKTX_INSTR_BAOFF_DBELL(offset) \ + (0x0000000000002C00ull + (((offset) & 31) * 16)) +#define CVMX_NPEI_PKTX_INSTR_FIFO_RSIZE(offset) \ + (0x0000000000003000ull + (((offset) & 31) * 16)) +#define CVMX_NPEI_PKTX_INSTR_HEADER(offset) \ + (0x0000000000003400ull + (((offset) & 31) * 16)) +#define CVMX_NPEI_PKTX_IN_BP(offset) \ + (0x0000000000003800ull + (((offset) & 31) * 16)) +#define CVMX_NPEI_PKTX_SLIST_BADDR(offset) \ + (0x0000000000001400ull + (((offset) & 31) * 16)) +#define CVMX_NPEI_PKTX_SLIST_BAOFF_DBELL(offset) \ + (0x0000000000001800ull + (((offset) & 31) * 16)) +#define CVMX_NPEI_PKTX_SLIST_FIFO_RSIZE(offset) \ + (0x0000000000001C00ull + (((offset) & 31) * 16)) +#define CVMX_NPEI_PKT_CNT_INT \ + (0x0000000000001110ull) +#define CVMX_NPEI_PKT_CNT_INT_ENB \ + (0x0000000000001130ull) +#define CVMX_NPEI_PKT_DATA_OUT_ES \ + (0x00000000000010B0ull) +#define CVMX_NPEI_PKT_DATA_OUT_NS \ + (0x00000000000010A0ull) +#define CVMX_NPEI_PKT_DATA_OUT_ROR \ + (0x0000000000001090ull) +#define CVMX_NPEI_PKT_DPADDR \ + (0x0000000000001080ull) +#define CVMX_NPEI_PKT_INPUT_CONTROL \ + (0x0000000000001150ull) +#define CVMX_NPEI_PKT_INSTR_ENB \ + (0x0000000000001000ull) +#define CVMX_NPEI_PKT_INSTR_RD_SIZE \ + (0x0000000000001190ull) +#define CVMX_NPEI_PKT_INSTR_SIZE \ + (0x0000000000001020ull) +#define CVMX_NPEI_PKT_INT_LEVELS \ + (0x0000000000001100ull) +#define CVMX_NPEI_PKT_IN_BP \ + (0x00000000000006B0ull) +#define CVMX_NPEI_PKT_IN_DONEX_CNTS(offset) \ + (0x0000000000002000ull + (((offset) & 31) * 16)) +#define CVMX_NPEI_PKT_IN_INSTR_COUNTS \ + (0x00000000000006A0ull) +#define CVMX_NPEI_PKT_IN_PCIE_PORT \ + (0x00000000000011A0ull) +#define CVMX_NPEI_PKT_IPTR \ + (0x0000000000001070ull) +#define CVMX_NPEI_PKT_OUTPUT_WMARK \ + (0x0000000000001160ull) +#define CVMX_NPEI_PKT_OUT_BMODE \ + (0x00000000000010D0ull) +#define CVMX_NPEI_PKT_OUT_ENB \ + (0x0000000000001010ull) +#define CVMX_NPEI_PKT_PCIE_PORT \ + (0x00000000000010E0ull) +#define CVMX_NPEI_PKT_PORT_IN_RST \ + (0x0000000000000690ull) +#define CVMX_NPEI_PKT_SLIST_ES \ + (0x0000000000001050ull) +#define CVMX_NPEI_PKT_SLIST_ID_SIZE \ + (0x0000000000001180ull) +#define CVMX_NPEI_PKT_SLIST_NS \ + (0x0000000000001040ull) +#define CVMX_NPEI_PKT_SLIST_ROR \ + (0x0000000000001030ull) +#define CVMX_NPEI_PKT_TIME_INT \ + (0x0000000000001120ull) +#define CVMX_NPEI_PKT_TIME_INT_ENB \ + (0x0000000000001140ull) +#define CVMX_NPEI_RSL_INT_BLOCKS \ + (0x0000000000000520ull) +#define CVMX_NPEI_SCRATCH_1 \ + (0x0000000000000270ull) +#define CVMX_NPEI_STATE1 \ + (0x0000000000000620ull) +#define CVMX_NPEI_STATE2 \ + (0x0000000000000630ull) +#define CVMX_NPEI_STATE3 \ + (0x0000000000000640ull) +#define CVMX_NPEI_WINDOW_CTL \ + (0x0000000000000380ull) +#define CVMX_NPEI_WIN_RD_ADDR \ + (0x0000000000000210ull) +#define CVMX_NPEI_WIN_RD_DATA \ + (0x0000000000000240ull) +#define CVMX_NPEI_WIN_WR_ADDR \ + (0x0000000000000200ull) +#define CVMX_NPEI_WIN_WR_DATA \ + (0x0000000000000220ull) +#define CVMX_NPEI_WIN_WR_MASK \ + (0x0000000000000230ull) + +union cvmx_npei_bar1_indexx { + uint32_t u32; + struct cvmx_npei_bar1_indexx_s { + uint32_t reserved_18_31:14; + uint32_t addr_idx:14; + uint32_t ca:1; + uint32_t end_swp:2; + uint32_t addr_v:1; + } s; + struct cvmx_npei_bar1_indexx_s cn52xx; + struct cvmx_npei_bar1_indexx_s cn52xxp1; + struct cvmx_npei_bar1_indexx_s cn56xx; + struct cvmx_npei_bar1_indexx_s cn56xxp1; +}; + +union cvmx_npei_bist_status { + uint64_t u64; + struct cvmx_npei_bist_status_s { + uint64_t pkt_rdf:1; + uint64_t pkt_pmem:1; + uint64_t pkt_p1:1; + uint64_t reserved_60_60:1; + uint64_t pcr_gim:1; + uint64_t pkt_pif:1; + uint64_t pcsr_int:1; + uint64_t pcsr_im:1; + uint64_t pcsr_cnt:1; + uint64_t pcsr_id:1; + uint64_t pcsr_sl:1; + uint64_t reserved_50_52:3; + uint64_t pkt_ind:1; + uint64_t pkt_slm:1; + uint64_t reserved_36_47:12; + uint64_t d0_pst:1; + uint64_t d1_pst:1; + uint64_t d2_pst:1; + uint64_t d3_pst:1; + uint64_t reserved_31_31:1; + uint64_t n2p0_c:1; + uint64_t n2p0_o:1; + uint64_t n2p1_c:1; + uint64_t n2p1_o:1; + uint64_t cpl_p0:1; + uint64_t cpl_p1:1; + uint64_t p2n1_po:1; + uint64_t p2n1_no:1; + uint64_t p2n1_co:1; + uint64_t p2n0_po:1; + uint64_t p2n0_no:1; + uint64_t p2n0_co:1; + uint64_t p2n0_c0:1; + uint64_t p2n0_c1:1; + uint64_t p2n0_n:1; + uint64_t p2n0_p0:1; + uint64_t p2n0_p1:1; + uint64_t p2n1_c0:1; + uint64_t p2n1_c1:1; + uint64_t p2n1_n:1; + uint64_t p2n1_p0:1; + uint64_t p2n1_p1:1; + uint64_t csm0:1; + uint64_t csm1:1; + uint64_t dif0:1; + uint64_t dif1:1; + uint64_t dif2:1; + uint64_t dif3:1; + uint64_t reserved_2_2:1; + uint64_t msi:1; + uint64_t ncb_cmd:1; + } s; + struct cvmx_npei_bist_status_cn52xx { + uint64_t pkt_rdf:1; + uint64_t pkt_pmem:1; + uint64_t pkt_p1:1; + uint64_t reserved_60_60:1; + uint64_t pcr_gim:1; + uint64_t pkt_pif:1; + uint64_t pcsr_int:1; + uint64_t pcsr_im:1; + uint64_t pcsr_cnt:1; + uint64_t pcsr_id:1; + uint64_t pcsr_sl:1; + uint64_t pkt_imem:1; + uint64_t pkt_pfm:1; + uint64_t pkt_pof:1; + uint64_t reserved_48_49:2; + uint64_t pkt_pop0:1; + uint64_t pkt_pop1:1; + uint64_t d0_mem:1; + uint64_t d1_mem:1; + uint64_t d2_mem:1; + uint64_t d3_mem:1; + uint64_t d4_mem:1; + uint64_t ds_mem:1; + uint64_t reserved_36_39:4; + uint64_t d0_pst:1; + uint64_t d1_pst:1; + uint64_t d2_pst:1; + uint64_t d3_pst:1; + uint64_t d4_pst:1; + uint64_t n2p0_c:1; + uint64_t n2p0_o:1; + uint64_t n2p1_c:1; + uint64_t n2p1_o:1; + uint64_t cpl_p0:1; + uint64_t cpl_p1:1; + uint64_t p2n1_po:1; + uint64_t p2n1_no:1; + uint64_t p2n1_co:1; + uint64_t p2n0_po:1; + uint64_t p2n0_no:1; + uint64_t p2n0_co:1; + uint64_t p2n0_c0:1; + uint64_t p2n0_c1:1; + uint64_t p2n0_n:1; + uint64_t p2n0_p0:1; + uint64_t p2n0_p1:1; + uint64_t p2n1_c0:1; + uint64_t p2n1_c1:1; + uint64_t p2n1_n:1; + uint64_t p2n1_p0:1; + uint64_t p2n1_p1:1; + uint64_t csm0:1; + uint64_t csm1:1; + uint64_t dif0:1; + uint64_t dif1:1; + uint64_t dif2:1; + uint64_t dif3:1; + uint64_t dif4:1; + uint64_t msi:1; + uint64_t ncb_cmd:1; + } cn52xx; + struct cvmx_npei_bist_status_cn52xxp1 { + uint64_t reserved_46_63:18; + uint64_t d0_mem0:1; + uint64_t d1_mem1:1; + uint64_t d2_mem2:1; + uint64_t d3_mem3:1; + uint64_t dr0_mem:1; + uint64_t d0_mem:1; + uint64_t d1_mem:1; + uint64_t d2_mem:1; + uint64_t d3_mem:1; + uint64_t dr1_mem:1; + uint64_t d0_pst:1; + uint64_t d1_pst:1; + uint64_t d2_pst:1; + uint64_t d3_pst:1; + uint64_t dr2_mem:1; + uint64_t n2p0_c:1; + uint64_t n2p0_o:1; + uint64_t n2p1_c:1; + uint64_t n2p1_o:1; + uint64_t cpl_p0:1; + uint64_t cpl_p1:1; + uint64_t p2n1_po:1; + uint64_t p2n1_no:1; + uint64_t p2n1_co:1; + uint64_t p2n0_po:1; + uint64_t p2n0_no:1; + uint64_t p2n0_co:1; + uint64_t p2n0_c0:1; + uint64_t p2n0_c1:1; + uint64_t p2n0_n:1; + uint64_t p2n0_p0:1; + uint64_t p2n0_p1:1; + uint64_t p2n1_c0:1; + uint64_t p2n1_c1:1; + uint64_t p2n1_n:1; + uint64_t p2n1_p0:1; + uint64_t p2n1_p1:1; + uint64_t csm0:1; + uint64_t csm1:1; + uint64_t dif0:1; + uint64_t dif1:1; + uint64_t dif2:1; + uint64_t dif3:1; + uint64_t dr3_mem:1; + uint64_t msi:1; + uint64_t ncb_cmd:1; + } cn52xxp1; + struct cvmx_npei_bist_status_cn56xx { + uint64_t pkt_rdf:1; + uint64_t reserved_60_62:3; + uint64_t pcr_gim:1; + uint64_t pkt_pif:1; + uint64_t pcsr_int:1; + uint64_t pcsr_im:1; + uint64_t pcsr_cnt:1; + uint64_t pcsr_id:1; + uint64_t pcsr_sl:1; + uint64_t pkt_imem:1; + uint64_t pkt_pfm:1; + uint64_t pkt_pof:1; + uint64_t reserved_48_49:2; + uint64_t pkt_pop0:1; + uint64_t pkt_pop1:1; + uint64_t d0_mem:1; + uint64_t d1_mem:1; + uint64_t d2_mem:1; + uint64_t d3_mem:1; + uint64_t d4_mem:1; + uint64_t ds_mem:1; + uint64_t reserved_36_39:4; + uint64_t d0_pst:1; + uint64_t d1_pst:1; + uint64_t d2_pst:1; + uint64_t d3_pst:1; + uint64_t d4_pst:1; + uint64_t n2p0_c:1; + uint64_t n2p0_o:1; + uint64_t n2p1_c:1; + uint64_t n2p1_o:1; + uint64_t cpl_p0:1; + uint64_t cpl_p1:1; + uint64_t p2n1_po:1; + uint64_t p2n1_no:1; + uint64_t p2n1_co:1; + uint64_t p2n0_po:1; + uint64_t p2n0_no:1; + uint64_t p2n0_co:1; + uint64_t p2n0_c0:1; + uint64_t p2n0_c1:1; + uint64_t p2n0_n:1; + uint64_t p2n0_p0:1; + uint64_t p2n0_p1:1; + uint64_t p2n1_c0:1; + uint64_t p2n1_c1:1; + uint64_t p2n1_n:1; + uint64_t p2n1_p0:1; + uint64_t p2n1_p1:1; + uint64_t csm0:1; + uint64_t csm1:1; + uint64_t dif0:1; + uint64_t dif1:1; + uint64_t dif2:1; + uint64_t dif3:1; + uint64_t dif4:1; + uint64_t msi:1; + uint64_t ncb_cmd:1; + } cn56xx; + struct cvmx_npei_bist_status_cn56xxp1 { + uint64_t reserved_58_63:6; + uint64_t pcsr_int:1; + uint64_t pcsr_im:1; + uint64_t pcsr_cnt:1; + uint64_t pcsr_id:1; + uint64_t pcsr_sl:1; + uint64_t pkt_pout:1; + uint64_t pkt_imem:1; + uint64_t pkt_cntm:1; + uint64_t pkt_ind:1; + uint64_t pkt_slm:1; + uint64_t pkt_odf:1; + uint64_t pkt_oif:1; + uint64_t pkt_out:1; + uint64_t pkt_i0:1; + uint64_t pkt_i1:1; + uint64_t pkt_s0:1; + uint64_t pkt_s1:1; + uint64_t d0_mem:1; + uint64_t d1_mem:1; + uint64_t d2_mem:1; + uint64_t d3_mem:1; + uint64_t d4_mem:1; + uint64_t d0_pst:1; + uint64_t d1_pst:1; + uint64_t d2_pst:1; + uint64_t d3_pst:1; + uint64_t d4_pst:1; + uint64_t n2p0_c:1; + uint64_t n2p0_o:1; + uint64_t n2p1_c:1; + uint64_t n2p1_o:1; + uint64_t cpl_p0:1; + uint64_t cpl_p1:1; + uint64_t p2n1_po:1; + uint64_t p2n1_no:1; + uint64_t p2n1_co:1; + uint64_t p2n0_po:1; + uint64_t p2n0_no:1; + uint64_t p2n0_co:1; + uint64_t p2n0_c0:1; + uint64_t p2n0_c1:1; + uint64_t p2n0_n:1; + uint64_t p2n0_p0:1; + uint64_t p2n0_p1:1; + uint64_t p2n1_c0:1; + uint64_t p2n1_c1:1; + uint64_t p2n1_n:1; + uint64_t p2n1_p0:1; + uint64_t p2n1_p1:1; + uint64_t csm0:1; + uint64_t csm1:1; + uint64_t dif0:1; + uint64_t dif1:1; + uint64_t dif2:1; + uint64_t dif3:1; + uint64_t dif4:1; + uint64_t msi:1; + uint64_t ncb_cmd:1; + } cn56xxp1; +}; + +union cvmx_npei_bist_status2 { + uint64_t u64; + struct cvmx_npei_bist_status2_s { + uint64_t reserved_5_63:59; + uint64_t psc_p0:1; + uint64_t psc_p1:1; + uint64_t pkt_gd:1; + uint64_t pkt_gl:1; + uint64_t pkt_blk:1; + } s; + struct cvmx_npei_bist_status2_s cn52xx; + struct cvmx_npei_bist_status2_s cn56xx; +}; + +union cvmx_npei_ctl_port0 { + uint64_t u64; + struct cvmx_npei_ctl_port0_s { + uint64_t reserved_21_63:43; + uint64_t waitl_com:1; + uint64_t intd:1; + uint64_t intc:1; + uint64_t intb:1; + uint64_t inta:1; + uint64_t intd_map:2; + uint64_t intc_map:2; + uint64_t intb_map:2; + uint64_t inta_map:2; + uint64_t ctlp_ro:1; + uint64_t reserved_6_6:1; + uint64_t ptlp_ro:1; + uint64_t bar2_enb:1; + uint64_t bar2_esx:2; + uint64_t bar2_cax:1; + uint64_t wait_com:1; + } s; + struct cvmx_npei_ctl_port0_s cn52xx; + struct cvmx_npei_ctl_port0_s cn52xxp1; + struct cvmx_npei_ctl_port0_s cn56xx; + struct cvmx_npei_ctl_port0_s cn56xxp1; +}; + +union cvmx_npei_ctl_port1 { + uint64_t u64; + struct cvmx_npei_ctl_port1_s { + uint64_t reserved_21_63:43; + uint64_t waitl_com:1; + uint64_t intd:1; + uint64_t intc:1; + uint64_t intb:1; + uint64_t inta:1; + uint64_t intd_map:2; + uint64_t intc_map:2; + uint64_t intb_map:2; + uint64_t inta_map:2; + uint64_t ctlp_ro:1; + uint64_t reserved_6_6:1; + uint64_t ptlp_ro:1; + uint64_t bar2_enb:1; + uint64_t bar2_esx:2; + uint64_t bar2_cax:1; + uint64_t wait_com:1; + } s; + struct cvmx_npei_ctl_port1_s cn52xx; + struct cvmx_npei_ctl_port1_s cn52xxp1; + struct cvmx_npei_ctl_port1_s cn56xx; + struct cvmx_npei_ctl_port1_s cn56xxp1; +}; + +union cvmx_npei_ctl_status { + uint64_t u64; + struct cvmx_npei_ctl_status_s { + uint64_t reserved_44_63:20; + uint64_t p1_ntags:6; + uint64_t p0_ntags:6; + uint64_t cfg_rtry:16; + uint64_t ring_en:1; + uint64_t lnk_rst:1; + uint64_t arb:1; + uint64_t pkt_bp:4; + uint64_t host_mode:1; + uint64_t chip_rev:8; + } s; + struct cvmx_npei_ctl_status_s cn52xx; + struct cvmx_npei_ctl_status_cn52xxp1 { + uint64_t reserved_44_63:20; + uint64_t p1_ntags:6; + uint64_t p0_ntags:6; + uint64_t cfg_rtry:16; + uint64_t reserved_15_15:1; + uint64_t lnk_rst:1; + uint64_t arb:1; + uint64_t reserved_9_12:4; + uint64_t host_mode:1; + uint64_t chip_rev:8; + } cn52xxp1; + struct cvmx_npei_ctl_status_s cn56xx; + struct cvmx_npei_ctl_status_cn56xxp1 { + uint64_t reserved_16_63:48; + uint64_t ring_en:1; + uint64_t lnk_rst:1; + uint64_t arb:1; + uint64_t pkt_bp:4; + uint64_t host_mode:1; + uint64_t chip_rev:8; + } cn56xxp1; +}; + +union cvmx_npei_ctl_status2 { + uint64_t u64; + struct cvmx_npei_ctl_status2_s { + uint64_t reserved_16_63:48; + uint64_t mps:1; + uint64_t mrrs:3; + uint64_t c1_w_flt:1; + uint64_t c0_w_flt:1; + uint64_t c1_b1_s:3; + uint64_t c0_b1_s:3; + uint64_t c1_wi_d:1; + uint64_t c1_b0_d:1; + uint64_t c0_wi_d:1; + uint64_t c0_b0_d:1; + } s; + struct cvmx_npei_ctl_status2_s cn52xx; + struct cvmx_npei_ctl_status2_s cn52xxp1; + struct cvmx_npei_ctl_status2_s cn56xx; + struct cvmx_npei_ctl_status2_s cn56xxp1; +}; + +union cvmx_npei_data_out_cnt { + uint64_t u64; + struct cvmx_npei_data_out_cnt_s { + uint64_t reserved_44_63:20; + uint64_t p1_ucnt:16; + uint64_t p1_fcnt:6; + uint64_t p0_ucnt:16; + uint64_t p0_fcnt:6; + } s; + struct cvmx_npei_data_out_cnt_s cn52xx; + struct cvmx_npei_data_out_cnt_s cn52xxp1; + struct cvmx_npei_data_out_cnt_s cn56xx; + struct cvmx_npei_data_out_cnt_s cn56xxp1; +}; + +union cvmx_npei_dbg_data { + uint64_t u64; + struct cvmx_npei_dbg_data_s { + uint64_t reserved_28_63:36; + uint64_t qlm0_rev_lanes:1; + uint64_t reserved_25_26:2; + uint64_t qlm1_spd:2; + uint64_t c_mul:5; + uint64_t dsel_ext:1; + uint64_t data:17; + } s; + struct cvmx_npei_dbg_data_cn52xx { + uint64_t reserved_29_63:35; + uint64_t qlm0_link_width:1; + uint64_t qlm0_rev_lanes:1; + uint64_t qlm1_mode:2; + uint64_t qlm1_spd:2; + uint64_t c_mul:5; + uint64_t dsel_ext:1; + uint64_t data:17; + } cn52xx; + struct cvmx_npei_dbg_data_cn52xx cn52xxp1; + struct cvmx_npei_dbg_data_cn56xx { + uint64_t reserved_29_63:35; + uint64_t qlm2_rev_lanes:1; + uint64_t qlm0_rev_lanes:1; + uint64_t qlm3_spd:2; + uint64_t qlm1_spd:2; + uint64_t c_mul:5; + uint64_t dsel_ext:1; + uint64_t data:17; + } cn56xx; + struct cvmx_npei_dbg_data_cn56xx cn56xxp1; +}; + +union cvmx_npei_dbg_select { + uint64_t u64; + struct cvmx_npei_dbg_select_s { + uint64_t reserved_16_63:48; + uint64_t dbg_sel:16; + } s; + struct cvmx_npei_dbg_select_s cn52xx; + struct cvmx_npei_dbg_select_s cn52xxp1; + struct cvmx_npei_dbg_select_s cn56xx; + struct cvmx_npei_dbg_select_s cn56xxp1; +}; + +union cvmx_npei_dmax_counts { + uint64_t u64; + struct cvmx_npei_dmax_counts_s { + uint64_t reserved_39_63:25; + uint64_t fcnt:7; + uint64_t dbell:32; + } s; + struct cvmx_npei_dmax_counts_s cn52xx; + struct cvmx_npei_dmax_counts_s cn52xxp1; + struct cvmx_npei_dmax_counts_s cn56xx; + struct cvmx_npei_dmax_counts_s cn56xxp1; +}; + +union cvmx_npei_dmax_dbell { + uint32_t u32; + struct cvmx_npei_dmax_dbell_s { + uint32_t reserved_16_31:16; + uint32_t dbell:16; + } s; + struct cvmx_npei_dmax_dbell_s cn52xx; + struct cvmx_npei_dmax_dbell_s cn52xxp1; + struct cvmx_npei_dmax_dbell_s cn56xx; + struct cvmx_npei_dmax_dbell_s cn56xxp1; +}; + +union cvmx_npei_dmax_ibuff_saddr { + uint64_t u64; + struct cvmx_npei_dmax_ibuff_saddr_s { + uint64_t reserved_37_63:27; + uint64_t idle:1; + uint64_t saddr:29; + uint64_t reserved_0_6:7; + } s; + struct cvmx_npei_dmax_ibuff_saddr_cn52xx { + uint64_t reserved_36_63:28; + uint64_t saddr:29; + uint64_t reserved_0_6:7; + } cn52xx; + struct cvmx_npei_dmax_ibuff_saddr_cn52xx cn52xxp1; + struct cvmx_npei_dmax_ibuff_saddr_s cn56xx; + struct cvmx_npei_dmax_ibuff_saddr_cn52xx cn56xxp1; +}; + +union cvmx_npei_dmax_naddr { + uint64_t u64; + struct cvmx_npei_dmax_naddr_s { + uint64_t reserved_36_63:28; + uint64_t addr:36; + } s; + struct cvmx_npei_dmax_naddr_s cn52xx; + struct cvmx_npei_dmax_naddr_s cn52xxp1; + struct cvmx_npei_dmax_naddr_s cn56xx; + struct cvmx_npei_dmax_naddr_s cn56xxp1; +}; + +union cvmx_npei_dma0_int_level { + uint64_t u64; + struct cvmx_npei_dma0_int_level_s { + uint64_t time:32; + uint64_t cnt:32; + } s; + struct cvmx_npei_dma0_int_level_s cn52xx; + struct cvmx_npei_dma0_int_level_s cn52xxp1; + struct cvmx_npei_dma0_int_level_s cn56xx; + struct cvmx_npei_dma0_int_level_s cn56xxp1; +}; + +union cvmx_npei_dma1_int_level { + uint64_t u64; + struct cvmx_npei_dma1_int_level_s { + uint64_t time:32; + uint64_t cnt:32; + } s; + struct cvmx_npei_dma1_int_level_s cn52xx; + struct cvmx_npei_dma1_int_level_s cn52xxp1; + struct cvmx_npei_dma1_int_level_s cn56xx; + struct cvmx_npei_dma1_int_level_s cn56xxp1; +}; + +union cvmx_npei_dma_cnts { + uint64_t u64; + struct cvmx_npei_dma_cnts_s { + uint64_t dma1:32; + uint64_t dma0:32; + } s; + struct cvmx_npei_dma_cnts_s cn52xx; + struct cvmx_npei_dma_cnts_s cn52xxp1; + struct cvmx_npei_dma_cnts_s cn56xx; + struct cvmx_npei_dma_cnts_s cn56xxp1; +}; + +union cvmx_npei_dma_control { + uint64_t u64; + struct cvmx_npei_dma_control_s { + uint64_t reserved_39_63:25; + uint64_t dma4_enb:1; + uint64_t dma3_enb:1; + uint64_t dma2_enb:1; + uint64_t dma1_enb:1; + uint64_t dma0_enb:1; + uint64_t b0_lend:1; + uint64_t dwb_denb:1; + uint64_t dwb_ichk:9; + uint64_t fpa_que:3; + uint64_t o_add1:1; + uint64_t o_ro:1; + uint64_t o_ns:1; + uint64_t o_es:2; + uint64_t o_mode:1; + uint64_t csize:14; + } s; + struct cvmx_npei_dma_control_s cn52xx; + struct cvmx_npei_dma_control_cn52xxp1 { + uint64_t reserved_38_63:26; + uint64_t dma3_enb:1; + uint64_t dma2_enb:1; + uint64_t dma1_enb:1; + uint64_t dma0_enb:1; + uint64_t b0_lend:1; + uint64_t dwb_denb:1; + uint64_t dwb_ichk:9; + uint64_t fpa_que:3; + uint64_t o_add1:1; + uint64_t o_ro:1; + uint64_t o_ns:1; + uint64_t o_es:2; + uint64_t o_mode:1; + uint64_t csize:14; + } cn52xxp1; + struct cvmx_npei_dma_control_s cn56xx; + struct cvmx_npei_dma_control_s cn56xxp1; +}; + +union cvmx_npei_int_a_enb { + uint64_t u64; + struct cvmx_npei_int_a_enb_s { + uint64_t reserved_10_63:54; + uint64_t pout_err:1; + uint64_t pin_bp:1; + uint64_t p1_rdlk:1; + uint64_t p0_rdlk:1; + uint64_t pgl_err:1; + uint64_t pdi_err:1; + uint64_t pop_err:1; + uint64_t pins_err:1; + uint64_t dma1_cpl:1; + uint64_t dma0_cpl:1; + } s; + struct cvmx_npei_int_a_enb_cn52xx { + uint64_t reserved_8_63:56; + uint64_t p1_rdlk:1; + uint64_t p0_rdlk:1; + uint64_t pgl_err:1; + uint64_t pdi_err:1; + uint64_t pop_err:1; + uint64_t pins_err:1; + uint64_t dma1_cpl:1; + uint64_t dma0_cpl:1; + } cn52xx; + struct cvmx_npei_int_a_enb_cn52xxp1 { + uint64_t reserved_2_63:62; + uint64_t dma1_cpl:1; + uint64_t dma0_cpl:1; + } cn52xxp1; + struct cvmx_npei_int_a_enb_s cn56xx; +}; + +union cvmx_npei_int_a_enb2 { + uint64_t u64; + struct cvmx_npei_int_a_enb2_s { + uint64_t reserved_10_63:54; + uint64_t pout_err:1; + uint64_t pin_bp:1; + uint64_t p1_rdlk:1; + uint64_t p0_rdlk:1; + uint64_t pgl_err:1; + uint64_t pdi_err:1; + uint64_t pop_err:1; + uint64_t pins_err:1; + uint64_t dma1_cpl:1; + uint64_t dma0_cpl:1; + } s; + struct cvmx_npei_int_a_enb2_cn52xx { + uint64_t reserved_8_63:56; + uint64_t p1_rdlk:1; + uint64_t p0_rdlk:1; + uint64_t pgl_err:1; + uint64_t pdi_err:1; + uint64_t pop_err:1; + uint64_t pins_err:1; + uint64_t reserved_0_1:2; + } cn52xx; + struct cvmx_npei_int_a_enb2_cn52xxp1 { + uint64_t reserved_2_63:62; + uint64_t dma1_cpl:1; + uint64_t dma0_cpl:1; + } cn52xxp1; + struct cvmx_npei_int_a_enb2_s cn56xx; +}; + +union cvmx_npei_int_a_sum { + uint64_t u64; + struct cvmx_npei_int_a_sum_s { + uint64_t reserved_10_63:54; + uint64_t pout_err:1; + uint64_t pin_bp:1; + uint64_t p1_rdlk:1; + uint64_t p0_rdlk:1; + uint64_t pgl_err:1; + uint64_t pdi_err:1; + uint64_t pop_err:1; + uint64_t pins_err:1; + uint64_t dma1_cpl:1; + uint64_t dma0_cpl:1; + } s; + struct cvmx_npei_int_a_sum_cn52xx { + uint64_t reserved_8_63:56; + uint64_t p1_rdlk:1; + uint64_t p0_rdlk:1; + uint64_t pgl_err:1; + uint64_t pdi_err:1; + uint64_t pop_err:1; + uint64_t pins_err:1; + uint64_t dma1_cpl:1; + uint64_t dma0_cpl:1; + } cn52xx; + struct cvmx_npei_int_a_sum_cn52xxp1 { + uint64_t reserved_2_63:62; + uint64_t dma1_cpl:1; + uint64_t dma0_cpl:1; + } cn52xxp1; + struct cvmx_npei_int_a_sum_s cn56xx; +}; + +union cvmx_npei_int_enb { + uint64_t u64; + struct cvmx_npei_int_enb_s { + uint64_t mio_inta:1; + uint64_t reserved_62_62:1; + uint64_t int_a:1; + uint64_t c1_ldwn:1; + uint64_t c0_ldwn:1; + uint64_t c1_exc:1; + uint64_t c0_exc:1; + uint64_t c1_up_wf:1; + uint64_t c0_up_wf:1; + uint64_t c1_un_wf:1; + uint64_t c0_un_wf:1; + uint64_t c1_un_bx:1; + uint64_t c1_un_wi:1; + uint64_t c1_un_b2:1; + uint64_t c1_un_b1:1; + uint64_t c1_un_b0:1; + uint64_t c1_up_bx:1; + uint64_t c1_up_wi:1; + uint64_t c1_up_b2:1; + uint64_t c1_up_b1:1; + uint64_t c1_up_b0:1; + uint64_t c0_un_bx:1; + uint64_t c0_un_wi:1; + uint64_t c0_un_b2:1; + uint64_t c0_un_b1:1; + uint64_t c0_un_b0:1; + uint64_t c0_up_bx:1; + uint64_t c0_up_wi:1; + uint64_t c0_up_b2:1; + uint64_t c0_up_b1:1; + uint64_t c0_up_b0:1; + uint64_t c1_hpint:1; + uint64_t c1_pmei:1; + uint64_t c1_wake:1; + uint64_t crs1_dr:1; + uint64_t c1_se:1; + uint64_t crs1_er:1; + uint64_t c1_aeri:1; + uint64_t c0_hpint:1; + uint64_t c0_pmei:1; + uint64_t c0_wake:1; + uint64_t crs0_dr:1; + uint64_t c0_se:1; + uint64_t crs0_er:1; + uint64_t c0_aeri:1; + uint64_t ptime:1; + uint64_t pcnt:1; + uint64_t pidbof:1; + uint64_t psldbof:1; + uint64_t dtime1:1; + uint64_t dtime0:1; + uint64_t dcnt1:1; + uint64_t dcnt0:1; + uint64_t dma1fi:1; + uint64_t dma0fi:1; + uint64_t dma4dbo:1; + uint64_t dma3dbo:1; + uint64_t dma2dbo:1; + uint64_t dma1dbo:1; + uint64_t dma0dbo:1; + uint64_t iob2big:1; + uint64_t bar0_to:1; + uint64_t rml_wto:1; + uint64_t rml_rto:1; + } s; + struct cvmx_npei_int_enb_s cn52xx; + struct cvmx_npei_int_enb_cn52xxp1 { + uint64_t mio_inta:1; + uint64_t reserved_62_62:1; + uint64_t int_a:1; + uint64_t c1_ldwn:1; + uint64_t c0_ldwn:1; + uint64_t c1_exc:1; + uint64_t c0_exc:1; + uint64_t c1_up_wf:1; + uint64_t c0_up_wf:1; + uint64_t c1_un_wf:1; + uint64_t c0_un_wf:1; + uint64_t c1_un_bx:1; + uint64_t c1_un_wi:1; + uint64_t c1_un_b2:1; + uint64_t c1_un_b1:1; + uint64_t c1_un_b0:1; + uint64_t c1_up_bx:1; + uint64_t c1_up_wi:1; + uint64_t c1_up_b2:1; + uint64_t c1_up_b1:1; + uint64_t c1_up_b0:1; + uint64_t c0_un_bx:1; + uint64_t c0_un_wi:1; + uint64_t c0_un_b2:1; + uint64_t c0_un_b1:1; + uint64_t c0_un_b0:1; + uint64_t c0_up_bx:1; + uint64_t c0_up_wi:1; + uint64_t c0_up_b2:1; + uint64_t c0_up_b1:1; + uint64_t c0_up_b0:1; + uint64_t c1_hpint:1; + uint64_t c1_pmei:1; + uint64_t c1_wake:1; + uint64_t crs1_dr:1; + uint64_t c1_se:1; + uint64_t crs1_er:1; + uint64_t c1_aeri:1; + uint64_t c0_hpint:1; + uint64_t c0_pmei:1; + uint64_t c0_wake:1; + uint64_t crs0_dr:1; + uint64_t c0_se:1; + uint64_t crs0_er:1; + uint64_t c0_aeri:1; + uint64_t ptime:1; + uint64_t pcnt:1; + uint64_t pidbof:1; + uint64_t psldbof:1; + uint64_t dtime1:1; + uint64_t dtime0:1; + uint64_t dcnt1:1; + uint64_t dcnt0:1; + uint64_t dma1fi:1; + uint64_t dma0fi:1; + uint64_t reserved_8_8:1; + uint64_t dma3dbo:1; + uint64_t dma2dbo:1; + uint64_t dma1dbo:1; + uint64_t dma0dbo:1; + uint64_t iob2big:1; + uint64_t bar0_to:1; + uint64_t rml_wto:1; + uint64_t rml_rto:1; + } cn52xxp1; + struct cvmx_npei_int_enb_s cn56xx; + struct cvmx_npei_int_enb_cn56xxp1 { + uint64_t mio_inta:1; + uint64_t reserved_61_62:2; + uint64_t c1_ldwn:1; + uint64_t c0_ldwn:1; + uint64_t c1_exc:1; + uint64_t c0_exc:1; + uint64_t c1_up_wf:1; + uint64_t c0_up_wf:1; + uint64_t c1_un_wf:1; + uint64_t c0_un_wf:1; + uint64_t c1_un_bx:1; + uint64_t c1_un_wi:1; + uint64_t c1_un_b2:1; + uint64_t c1_un_b1:1; + uint64_t c1_un_b0:1; + uint64_t c1_up_bx:1; + uint64_t c1_up_wi:1; + uint64_t c1_up_b2:1; + uint64_t c1_up_b1:1; + uint64_t c1_up_b0:1; + uint64_t c0_un_bx:1; + uint64_t c0_un_wi:1; + uint64_t c0_un_b2:1; + uint64_t c0_un_b1:1; + uint64_t c0_un_b0:1; + uint64_t c0_up_bx:1; + uint64_t c0_up_wi:1; + uint64_t c0_up_b2:1; + uint64_t c0_up_b1:1; + uint64_t c0_up_b0:1; + uint64_t c1_hpint:1; + uint64_t c1_pmei:1; + uint64_t c1_wake:1; + uint64_t reserved_29_29:1; + uint64_t c1_se:1; + uint64_t reserved_27_27:1; + uint64_t c1_aeri:1; + uint64_t c0_hpint:1; + uint64_t c0_pmei:1; + uint64_t c0_wake:1; + uint64_t reserved_22_22:1; + uint64_t c0_se:1; + uint64_t reserved_20_20:1; + uint64_t c0_aeri:1; + uint64_t ptime:1; + uint64_t pcnt:1; + uint64_t pidbof:1; + uint64_t psldbof:1; + uint64_t dtime1:1; + uint64_t dtime0:1; + uint64_t dcnt1:1; + uint64_t dcnt0:1; + uint64_t dma1fi:1; + uint64_t dma0fi:1; + uint64_t dma4dbo:1; + uint64_t dma3dbo:1; + uint64_t dma2dbo:1; + uint64_t dma1dbo:1; + uint64_t dma0dbo:1; + uint64_t iob2big:1; + uint64_t bar0_to:1; + uint64_t rml_wto:1; + uint64_t rml_rto:1; + } cn56xxp1; +}; + +union cvmx_npei_int_enb2 { + uint64_t u64; + struct cvmx_npei_int_enb2_s { + uint64_t reserved_62_63:2; + uint64_t int_a:1; + uint64_t c1_ldwn:1; + uint64_t c0_ldwn:1; + uint64_t c1_exc:1; + uint64_t c0_exc:1; + uint64_t c1_up_wf:1; + uint64_t c0_up_wf:1; + uint64_t c1_un_wf:1; + uint64_t c0_un_wf:1; + uint64_t c1_un_bx:1; + uint64_t c1_un_wi:1; + uint64_t c1_un_b2:1; + uint64_t c1_un_b1:1; + uint64_t c1_un_b0:1; + uint64_t c1_up_bx:1; + uint64_t c1_up_wi:1; + uint64_t c1_up_b2:1; + uint64_t c1_up_b1:1; + uint64_t c1_up_b0:1; + uint64_t c0_un_bx:1; + uint64_t c0_un_wi:1; + uint64_t c0_un_b2:1; + uint64_t c0_un_b1:1; + uint64_t c0_un_b0:1; + uint64_t c0_up_bx:1; + uint64_t c0_up_wi:1; + uint64_t c0_up_b2:1; + uint64_t c0_up_b1:1; + uint64_t c0_up_b0:1; + uint64_t c1_hpint:1; + uint64_t c1_pmei:1; + uint64_t c1_wake:1; + uint64_t crs1_dr:1; + uint64_t c1_se:1; + uint64_t crs1_er:1; + uint64_t c1_aeri:1; + uint64_t c0_hpint:1; + uint64_t c0_pmei:1; + uint64_t c0_wake:1; + uint64_t crs0_dr:1; + uint64_t c0_se:1; + uint64_t crs0_er:1; + uint64_t c0_aeri:1; + uint64_t ptime:1; + uint64_t pcnt:1; + uint64_t pidbof:1; + uint64_t psldbof:1; + uint64_t dtime1:1; + uint64_t dtime0:1; + uint64_t dcnt1:1; + uint64_t dcnt0:1; + uint64_t dma1fi:1; + uint64_t dma0fi:1; + uint64_t dma4dbo:1; + uint64_t dma3dbo:1; + uint64_t dma2dbo:1; + uint64_t dma1dbo:1; + uint64_t dma0dbo:1; + uint64_t iob2big:1; + uint64_t bar0_to:1; + uint64_t rml_wto:1; + uint64_t rml_rto:1; + } s; + struct cvmx_npei_int_enb2_s cn52xx; + struct cvmx_npei_int_enb2_cn52xxp1 { + uint64_t reserved_62_63:2; + uint64_t int_a:1; + uint64_t c1_ldwn:1; + uint64_t c0_ldwn:1; + uint64_t c1_exc:1; + uint64_t c0_exc:1; + uint64_t c1_up_wf:1; + uint64_t c0_up_wf:1; + uint64_t c1_un_wf:1; + uint64_t c0_un_wf:1; + uint64_t c1_un_bx:1; + uint64_t c1_un_wi:1; + uint64_t c1_un_b2:1; + uint64_t c1_un_b1:1; + uint64_t c1_un_b0:1; + uint64_t c1_up_bx:1; + uint64_t c1_up_wi:1; + uint64_t c1_up_b2:1; + uint64_t c1_up_b1:1; + uint64_t c1_up_b0:1; + uint64_t c0_un_bx:1; + uint64_t c0_un_wi:1; + uint64_t c0_un_b2:1; + uint64_t c0_un_b1:1; + uint64_t c0_un_b0:1; + uint64_t c0_up_bx:1; + uint64_t c0_up_wi:1; + uint64_t c0_up_b2:1; + uint64_t c0_up_b1:1; + uint64_t c0_up_b0:1; + uint64_t c1_hpint:1; + uint64_t c1_pmei:1; + uint64_t c1_wake:1; + uint64_t crs1_dr:1; + uint64_t c1_se:1; + uint64_t crs1_er:1; + uint64_t c1_aeri:1; + uint64_t c0_hpint:1; + uint64_t c0_pmei:1; + uint64_t c0_wake:1; + uint64_t crs0_dr:1; + uint64_t c0_se:1; + uint64_t crs0_er:1; + uint64_t c0_aeri:1; + uint64_t ptime:1; + uint64_t pcnt:1; + uint64_t pidbof:1; + uint64_t psldbof:1; + uint64_t dtime1:1; + uint64_t dtime0:1; + uint64_t dcnt1:1; + uint64_t dcnt0:1; + uint64_t dma1fi:1; + uint64_t dma0fi:1; + uint64_t reserved_8_8:1; + uint64_t dma3dbo:1; + uint64_t dma2dbo:1; + uint64_t dma1dbo:1; + uint64_t dma0dbo:1; + uint64_t iob2big:1; + uint64_t bar0_to:1; + uint64_t rml_wto:1; + uint64_t rml_rto:1; + } cn52xxp1; + struct cvmx_npei_int_enb2_s cn56xx; + struct cvmx_npei_int_enb2_cn56xxp1 { + uint64_t reserved_61_63:3; + uint64_t c1_ldwn:1; + uint64_t c0_ldwn:1; + uint64_t c1_exc:1; + uint64_t c0_exc:1; + uint64_t c1_up_wf:1; + uint64_t c0_up_wf:1; + uint64_t c1_un_wf:1; + uint64_t c0_un_wf:1; + uint64_t c1_un_bx:1; + uint64_t c1_un_wi:1; + uint64_t c1_un_b2:1; + uint64_t c1_un_b1:1; + uint64_t c1_un_b0:1; + uint64_t c1_up_bx:1; + uint64_t c1_up_wi:1; + uint64_t c1_up_b2:1; + uint64_t c1_up_b1:1; + uint64_t c1_up_b0:1; + uint64_t c0_un_bx:1; + uint64_t c0_un_wi:1; + uint64_t c0_un_b2:1; + uint64_t c0_un_b1:1; + uint64_t c0_un_b0:1; + uint64_t c0_up_bx:1; + uint64_t c0_up_wi:1; + uint64_t c0_up_b2:1; + uint64_t c0_up_b1:1; + uint64_t c0_up_b0:1; + uint64_t c1_hpint:1; + uint64_t c1_pmei:1; + uint64_t c1_wake:1; + uint64_t reserved_29_29:1; + uint64_t c1_se:1; + uint64_t reserved_27_27:1; + uint64_t c1_aeri:1; + uint64_t c0_hpint:1; + uint64_t c0_pmei:1; + uint64_t c0_wake:1; + uint64_t reserved_22_22:1; + uint64_t c0_se:1; + uint64_t reserved_20_20:1; + uint64_t c0_aeri:1; + uint64_t ptime:1; + uint64_t pcnt:1; + uint64_t pidbof:1; + uint64_t psldbof:1; + uint64_t dtime1:1; + uint64_t dtime0:1; + uint64_t dcnt1:1; + uint64_t dcnt0:1; + uint64_t dma1fi:1; + uint64_t dma0fi:1; + uint64_t dma4dbo:1; + uint64_t dma3dbo:1; + uint64_t dma2dbo:1; + uint64_t dma1dbo:1; + uint64_t dma0dbo:1; + uint64_t iob2big:1; + uint64_t bar0_to:1; + uint64_t rml_wto:1; + uint64_t rml_rto:1; + } cn56xxp1; +}; + +union cvmx_npei_int_info { + uint64_t u64; + struct cvmx_npei_int_info_s { + uint64_t reserved_12_63:52; + uint64_t pidbof:6; + uint64_t psldbof:6; + } s; + struct cvmx_npei_int_info_s cn52xx; + struct cvmx_npei_int_info_s cn56xx; + struct cvmx_npei_int_info_s cn56xxp1; +}; + +union cvmx_npei_int_sum { + uint64_t u64; + struct cvmx_npei_int_sum_s { + uint64_t mio_inta:1; + uint64_t reserved_62_62:1; + uint64_t int_a:1; + uint64_t c1_ldwn:1; + uint64_t c0_ldwn:1; + uint64_t c1_exc:1; + uint64_t c0_exc:1; + uint64_t c1_up_wf:1; + uint64_t c0_up_wf:1; + uint64_t c1_un_wf:1; + uint64_t c0_un_wf:1; + uint64_t c1_un_bx:1; + uint64_t c1_un_wi:1; + uint64_t c1_un_b2:1; + uint64_t c1_un_b1:1; + uint64_t c1_un_b0:1; + uint64_t c1_up_bx:1; + uint64_t c1_up_wi:1; + uint64_t c1_up_b2:1; + uint64_t c1_up_b1:1; + uint64_t c1_up_b0:1; + uint64_t c0_un_bx:1; + uint64_t c0_un_wi:1; + uint64_t c0_un_b2:1; + uint64_t c0_un_b1:1; + uint64_t c0_un_b0:1; + uint64_t c0_up_bx:1; + uint64_t c0_up_wi:1; + uint64_t c0_up_b2:1; + uint64_t c0_up_b1:1; + uint64_t c0_up_b0:1; + uint64_t c1_hpint:1; + uint64_t c1_pmei:1; + uint64_t c1_wake:1; + uint64_t crs1_dr:1; + uint64_t c1_se:1; + uint64_t crs1_er:1; + uint64_t c1_aeri:1; + uint64_t c0_hpint:1; + uint64_t c0_pmei:1; + uint64_t c0_wake:1; + uint64_t crs0_dr:1; + uint64_t c0_se:1; + uint64_t crs0_er:1; + uint64_t c0_aeri:1; + uint64_t ptime:1; + uint64_t pcnt:1; + uint64_t pidbof:1; + uint64_t psldbof:1; + uint64_t dtime1:1; + uint64_t dtime0:1; + uint64_t dcnt1:1; + uint64_t dcnt0:1; + uint64_t dma1fi:1; + uint64_t dma0fi:1; + uint64_t dma4dbo:1; + uint64_t dma3dbo:1; + uint64_t dma2dbo:1; + uint64_t dma1dbo:1; + uint64_t dma0dbo:1; + uint64_t iob2big:1; + uint64_t bar0_to:1; + uint64_t rml_wto:1; + uint64_t rml_rto:1; + } s; + struct cvmx_npei_int_sum_s cn52xx; + struct cvmx_npei_int_sum_cn52xxp1 { + uint64_t mio_inta:1; + uint64_t reserved_62_62:1; + uint64_t int_a:1; + uint64_t c1_ldwn:1; + uint64_t c0_ldwn:1; + uint64_t c1_exc:1; + uint64_t c0_exc:1; + uint64_t c1_up_wf:1; + uint64_t c0_up_wf:1; + uint64_t c1_un_wf:1; + uint64_t c0_un_wf:1; + uint64_t c1_un_bx:1; + uint64_t c1_un_wi:1; + uint64_t c1_un_b2:1; + uint64_t c1_un_b1:1; + uint64_t c1_un_b0:1; + uint64_t c1_up_bx:1; + uint64_t c1_up_wi:1; + uint64_t c1_up_b2:1; + uint64_t c1_up_b1:1; + uint64_t c1_up_b0:1; + uint64_t c0_un_bx:1; + uint64_t c0_un_wi:1; + uint64_t c0_un_b2:1; + uint64_t c0_un_b1:1; + uint64_t c0_un_b0:1; + uint64_t c0_up_bx:1; + uint64_t c0_up_wi:1; + uint64_t c0_up_b2:1; + uint64_t c0_up_b1:1; + uint64_t c0_up_b0:1; + uint64_t c1_hpint:1; + uint64_t c1_pmei:1; + uint64_t c1_wake:1; + uint64_t crs1_dr:1; + uint64_t c1_se:1; + uint64_t crs1_er:1; + uint64_t c1_aeri:1; + uint64_t c0_hpint:1; + uint64_t c0_pmei:1; + uint64_t c0_wake:1; + uint64_t crs0_dr:1; + uint64_t c0_se:1; + uint64_t crs0_er:1; + uint64_t c0_aeri:1; + uint64_t reserved_15_18:4; + uint64_t dtime1:1; + uint64_t dtime0:1; + uint64_t dcnt1:1; + uint64_t dcnt0:1; + uint64_t dma1fi:1; + uint64_t dma0fi:1; + uint64_t reserved_8_8:1; + uint64_t dma3dbo:1; + uint64_t dma2dbo:1; + uint64_t dma1dbo:1; + uint64_t dma0dbo:1; + uint64_t iob2big:1; + uint64_t bar0_to:1; + uint64_t rml_wto:1; + uint64_t rml_rto:1; + } cn52xxp1; + struct cvmx_npei_int_sum_s cn56xx; + struct cvmx_npei_int_sum_cn56xxp1 { + uint64_t mio_inta:1; + uint64_t reserved_61_62:2; + uint64_t c1_ldwn:1; + uint64_t c0_ldwn:1; + uint64_t c1_exc:1; + uint64_t c0_exc:1; + uint64_t c1_up_wf:1; + uint64_t c0_up_wf:1; + uint64_t c1_un_wf:1; + uint64_t c0_un_wf:1; + uint64_t c1_un_bx:1; + uint64_t c1_un_wi:1; + uint64_t c1_un_b2:1; + uint64_t c1_un_b1:1; + uint64_t c1_un_b0:1; + uint64_t c1_up_bx:1; + uint64_t c1_up_wi:1; + uint64_t c1_up_b2:1; + uint64_t c1_up_b1:1; + uint64_t c1_up_b0:1; + uint64_t c0_un_bx:1; + uint64_t c0_un_wi:1; + uint64_t c0_un_b2:1; + uint64_t c0_un_b1:1; + uint64_t c0_un_b0:1; + uint64_t c0_up_bx:1; + uint64_t c0_up_wi:1; + uint64_t c0_up_b2:1; + uint64_t c0_up_b1:1; + uint64_t c0_up_b0:1; + uint64_t c1_hpint:1; + uint64_t c1_pmei:1; + uint64_t c1_wake:1; + uint64_t reserved_29_29:1; + uint64_t c1_se:1; + uint64_t reserved_27_27:1; + uint64_t c1_aeri:1; + uint64_t c0_hpint:1; + uint64_t c0_pmei:1; + uint64_t c0_wake:1; + uint64_t reserved_22_22:1; + uint64_t c0_se:1; + uint64_t reserved_20_20:1; + uint64_t c0_aeri:1; + uint64_t ptime:1; + uint64_t pcnt:1; + uint64_t pidbof:1; + uint64_t psldbof:1; + uint64_t dtime1:1; + uint64_t dtime0:1; + uint64_t dcnt1:1; + uint64_t dcnt0:1; + uint64_t dma1fi:1; + uint64_t dma0fi:1; + uint64_t dma4dbo:1; + uint64_t dma3dbo:1; + uint64_t dma2dbo:1; + uint64_t dma1dbo:1; + uint64_t dma0dbo:1; + uint64_t iob2big:1; + uint64_t bar0_to:1; + uint64_t rml_wto:1; + uint64_t rml_rto:1; + } cn56xxp1; +}; + +union cvmx_npei_int_sum2 { + uint64_t u64; + struct cvmx_npei_int_sum2_s { + uint64_t mio_inta:1; + uint64_t reserved_62_62:1; + uint64_t int_a:1; + uint64_t c1_ldwn:1; + uint64_t c0_ldwn:1; + uint64_t c1_exc:1; + uint64_t c0_exc:1; + uint64_t c1_up_wf:1; + uint64_t c0_up_wf:1; + uint64_t c1_un_wf:1; + uint64_t c0_un_wf:1; + uint64_t c1_un_bx:1; + uint64_t c1_un_wi:1; + uint64_t c1_un_b2:1; + uint64_t c1_un_b1:1; + uint64_t c1_un_b0:1; + uint64_t c1_up_bx:1; + uint64_t c1_up_wi:1; + uint64_t c1_up_b2:1; + uint64_t c1_up_b1:1; + uint64_t c1_up_b0:1; + uint64_t c0_un_bx:1; + uint64_t c0_un_wi:1; + uint64_t c0_un_b2:1; + uint64_t c0_un_b1:1; + uint64_t c0_un_b0:1; + uint64_t c0_up_bx:1; + uint64_t c0_up_wi:1; + uint64_t c0_up_b2:1; + uint64_t c0_up_b1:1; + uint64_t c0_up_b0:1; + uint64_t c1_hpint:1; + uint64_t c1_pmei:1; + uint64_t c1_wake:1; + uint64_t crs1_dr:1; + uint64_t c1_se:1; + uint64_t crs1_er:1; + uint64_t c1_aeri:1; + uint64_t c0_hpint:1; + uint64_t c0_pmei:1; + uint64_t c0_wake:1; + uint64_t crs0_dr:1; + uint64_t c0_se:1; + uint64_t crs0_er:1; + uint64_t c0_aeri:1; + uint64_t reserved_15_18:4; + uint64_t dtime1:1; + uint64_t dtime0:1; + uint64_t dcnt1:1; + uint64_t dcnt0:1; + uint64_t dma1fi:1; + uint64_t dma0fi:1; + uint64_t reserved_8_8:1; + uint64_t dma3dbo:1; + uint64_t dma2dbo:1; + uint64_t dma1dbo:1; + uint64_t dma0dbo:1; + uint64_t iob2big:1; + uint64_t bar0_to:1; + uint64_t rml_wto:1; + uint64_t rml_rto:1; + } s; + struct cvmx_npei_int_sum2_s cn52xx; + struct cvmx_npei_int_sum2_s cn52xxp1; + struct cvmx_npei_int_sum2_s cn56xx; +}; + +union cvmx_npei_last_win_rdata0 { + uint64_t u64; + struct cvmx_npei_last_win_rdata0_s { + uint64_t data:64; + } s; + struct cvmx_npei_last_win_rdata0_s cn52xx; + struct cvmx_npei_last_win_rdata0_s cn52xxp1; + struct cvmx_npei_last_win_rdata0_s cn56xx; + struct cvmx_npei_last_win_rdata0_s cn56xxp1; +}; + +union cvmx_npei_last_win_rdata1 { + uint64_t u64; + struct cvmx_npei_last_win_rdata1_s { + uint64_t data:64; + } s; + struct cvmx_npei_last_win_rdata1_s cn52xx; + struct cvmx_npei_last_win_rdata1_s cn52xxp1; + struct cvmx_npei_last_win_rdata1_s cn56xx; + struct cvmx_npei_last_win_rdata1_s cn56xxp1; +}; + +union cvmx_npei_mem_access_ctl { + uint64_t u64; + struct cvmx_npei_mem_access_ctl_s { + uint64_t reserved_14_63:50; + uint64_t max_word:4; + uint64_t timer:10; + } s; + struct cvmx_npei_mem_access_ctl_s cn52xx; + struct cvmx_npei_mem_access_ctl_s cn52xxp1; + struct cvmx_npei_mem_access_ctl_s cn56xx; + struct cvmx_npei_mem_access_ctl_s cn56xxp1; +}; + +union cvmx_npei_mem_access_subidx { + uint64_t u64; + struct cvmx_npei_mem_access_subidx_s { + uint64_t reserved_42_63:22; + uint64_t zero:1; + uint64_t port:2; + uint64_t nmerge:1; + uint64_t esr:2; + uint64_t esw:2; + uint64_t nsr:1; + uint64_t nsw:1; + uint64_t ror:1; + uint64_t row:1; + uint64_t ba:30; + } s; + struct cvmx_npei_mem_access_subidx_s cn52xx; + struct cvmx_npei_mem_access_subidx_s cn52xxp1; + struct cvmx_npei_mem_access_subidx_s cn56xx; + struct cvmx_npei_mem_access_subidx_s cn56xxp1; +}; + +union cvmx_npei_msi_enb0 { + uint64_t u64; + struct cvmx_npei_msi_enb0_s { + uint64_t enb:64; + } s; + struct cvmx_npei_msi_enb0_s cn52xx; + struct cvmx_npei_msi_enb0_s cn52xxp1; + struct cvmx_npei_msi_enb0_s cn56xx; + struct cvmx_npei_msi_enb0_s cn56xxp1; +}; + +union cvmx_npei_msi_enb1 { + uint64_t u64; + struct cvmx_npei_msi_enb1_s { + uint64_t enb:64; + } s; + struct cvmx_npei_msi_enb1_s cn52xx; + struct cvmx_npei_msi_enb1_s cn52xxp1; + struct cvmx_npei_msi_enb1_s cn56xx; + struct cvmx_npei_msi_enb1_s cn56xxp1; +}; + +union cvmx_npei_msi_enb2 { + uint64_t u64; + struct cvmx_npei_msi_enb2_s { + uint64_t enb:64; + } s; + struct cvmx_npei_msi_enb2_s cn52xx; + struct cvmx_npei_msi_enb2_s cn52xxp1; + struct cvmx_npei_msi_enb2_s cn56xx; + struct cvmx_npei_msi_enb2_s cn56xxp1; +}; + +union cvmx_npei_msi_enb3 { + uint64_t u64; + struct cvmx_npei_msi_enb3_s { + uint64_t enb:64; + } s; + struct cvmx_npei_msi_enb3_s cn52xx; + struct cvmx_npei_msi_enb3_s cn52xxp1; + struct cvmx_npei_msi_enb3_s cn56xx; + struct cvmx_npei_msi_enb3_s cn56xxp1; +}; + +union cvmx_npei_msi_rcv0 { + uint64_t u64; + struct cvmx_npei_msi_rcv0_s { + uint64_t intr:64; + } s; + struct cvmx_npei_msi_rcv0_s cn52xx; + struct cvmx_npei_msi_rcv0_s cn52xxp1; + struct cvmx_npei_msi_rcv0_s cn56xx; + struct cvmx_npei_msi_rcv0_s cn56xxp1; +}; + +union cvmx_npei_msi_rcv1 { + uint64_t u64; + struct cvmx_npei_msi_rcv1_s { + uint64_t intr:64; + } s; + struct cvmx_npei_msi_rcv1_s cn52xx; + struct cvmx_npei_msi_rcv1_s cn52xxp1; + struct cvmx_npei_msi_rcv1_s cn56xx; + struct cvmx_npei_msi_rcv1_s cn56xxp1; +}; + +union cvmx_npei_msi_rcv2 { + uint64_t u64; + struct cvmx_npei_msi_rcv2_s { + uint64_t intr:64; + } s; + struct cvmx_npei_msi_rcv2_s cn52xx; + struct cvmx_npei_msi_rcv2_s cn52xxp1; + struct cvmx_npei_msi_rcv2_s cn56xx; + struct cvmx_npei_msi_rcv2_s cn56xxp1; +}; + +union cvmx_npei_msi_rcv3 { + uint64_t u64; + struct cvmx_npei_msi_rcv3_s { + uint64_t intr:64; + } s; + struct cvmx_npei_msi_rcv3_s cn52xx; + struct cvmx_npei_msi_rcv3_s cn52xxp1; + struct cvmx_npei_msi_rcv3_s cn56xx; + struct cvmx_npei_msi_rcv3_s cn56xxp1; +}; + +union cvmx_npei_msi_rd_map { + uint64_t u64; + struct cvmx_npei_msi_rd_map_s { + uint64_t reserved_16_63:48; + uint64_t rd_int:8; + uint64_t msi_int:8; + } s; + struct cvmx_npei_msi_rd_map_s cn52xx; + struct cvmx_npei_msi_rd_map_s cn52xxp1; + struct cvmx_npei_msi_rd_map_s cn56xx; + struct cvmx_npei_msi_rd_map_s cn56xxp1; +}; + +union cvmx_npei_msi_w1c_enb0 { + uint64_t u64; + struct cvmx_npei_msi_w1c_enb0_s { + uint64_t clr:64; + } s; + struct cvmx_npei_msi_w1c_enb0_s cn52xx; + struct cvmx_npei_msi_w1c_enb0_s cn56xx; +}; + +union cvmx_npei_msi_w1c_enb1 { + uint64_t u64; + struct cvmx_npei_msi_w1c_enb1_s { + uint64_t clr:64; + } s; + struct cvmx_npei_msi_w1c_enb1_s cn52xx; + struct cvmx_npei_msi_w1c_enb1_s cn56xx; +}; + +union cvmx_npei_msi_w1c_enb2 { + uint64_t u64; + struct cvmx_npei_msi_w1c_enb2_s { + uint64_t clr:64; + } s; + struct cvmx_npei_msi_w1c_enb2_s cn52xx; + struct cvmx_npei_msi_w1c_enb2_s cn56xx; +}; + +union cvmx_npei_msi_w1c_enb3 { + uint64_t u64; + struct cvmx_npei_msi_w1c_enb3_s { + uint64_t clr:64; + } s; + struct cvmx_npei_msi_w1c_enb3_s cn52xx; + struct cvmx_npei_msi_w1c_enb3_s cn56xx; +}; + +union cvmx_npei_msi_w1s_enb0 { + uint64_t u64; + struct cvmx_npei_msi_w1s_enb0_s { + uint64_t set:64; + } s; + struct cvmx_npei_msi_w1s_enb0_s cn52xx; + struct cvmx_npei_msi_w1s_enb0_s cn56xx; +}; + +union cvmx_npei_msi_w1s_enb1 { + uint64_t u64; + struct cvmx_npei_msi_w1s_enb1_s { + uint64_t set:64; + } s; + struct cvmx_npei_msi_w1s_enb1_s cn52xx; + struct cvmx_npei_msi_w1s_enb1_s cn56xx; +}; + +union cvmx_npei_msi_w1s_enb2 { + uint64_t u64; + struct cvmx_npei_msi_w1s_enb2_s { + uint64_t set:64; + } s; + struct cvmx_npei_msi_w1s_enb2_s cn52xx; + struct cvmx_npei_msi_w1s_enb2_s cn56xx; +}; + +union cvmx_npei_msi_w1s_enb3 { + uint64_t u64; + struct cvmx_npei_msi_w1s_enb3_s { + uint64_t set:64; + } s; + struct cvmx_npei_msi_w1s_enb3_s cn52xx; + struct cvmx_npei_msi_w1s_enb3_s cn56xx; +}; + +union cvmx_npei_msi_wr_map { + uint64_t u64; + struct cvmx_npei_msi_wr_map_s { + uint64_t reserved_16_63:48; + uint64_t ciu_int:8; + uint64_t msi_int:8; + } s; + struct cvmx_npei_msi_wr_map_s cn52xx; + struct cvmx_npei_msi_wr_map_s cn52xxp1; + struct cvmx_npei_msi_wr_map_s cn56xx; + struct cvmx_npei_msi_wr_map_s cn56xxp1; +}; + +union cvmx_npei_pcie_credit_cnt { + uint64_t u64; + struct cvmx_npei_pcie_credit_cnt_s { + uint64_t reserved_48_63:16; + uint64_t p1_ccnt:8; + uint64_t p1_ncnt:8; + uint64_t p1_pcnt:8; + uint64_t p0_ccnt:8; + uint64_t p0_ncnt:8; + uint64_t p0_pcnt:8; + } s; + struct cvmx_npei_pcie_credit_cnt_s cn52xx; + struct cvmx_npei_pcie_credit_cnt_s cn56xx; +}; + +union cvmx_npei_pcie_msi_rcv { + uint64_t u64; + struct cvmx_npei_pcie_msi_rcv_s { + uint64_t reserved_8_63:56; + uint64_t intr:8; + } s; + struct cvmx_npei_pcie_msi_rcv_s cn52xx; + struct cvmx_npei_pcie_msi_rcv_s cn52xxp1; + struct cvmx_npei_pcie_msi_rcv_s cn56xx; + struct cvmx_npei_pcie_msi_rcv_s cn56xxp1; +}; + +union cvmx_npei_pcie_msi_rcv_b1 { + uint64_t u64; + struct cvmx_npei_pcie_msi_rcv_b1_s { + uint64_t reserved_16_63:48; + uint64_t intr:8; + uint64_t reserved_0_7:8; + } s; + struct cvmx_npei_pcie_msi_rcv_b1_s cn52xx; + struct cvmx_npei_pcie_msi_rcv_b1_s cn52xxp1; + struct cvmx_npei_pcie_msi_rcv_b1_s cn56xx; + struct cvmx_npei_pcie_msi_rcv_b1_s cn56xxp1; +}; + +union cvmx_npei_pcie_msi_rcv_b2 { + uint64_t u64; + struct cvmx_npei_pcie_msi_rcv_b2_s { + uint64_t reserved_24_63:40; + uint64_t intr:8; + uint64_t reserved_0_15:16; + } s; + struct cvmx_npei_pcie_msi_rcv_b2_s cn52xx; + struct cvmx_npei_pcie_msi_rcv_b2_s cn52xxp1; + struct cvmx_npei_pcie_msi_rcv_b2_s cn56xx; + struct cvmx_npei_pcie_msi_rcv_b2_s cn56xxp1; +}; + +union cvmx_npei_pcie_msi_rcv_b3 { + uint64_t u64; + struct cvmx_npei_pcie_msi_rcv_b3_s { + uint64_t reserved_32_63:32; + uint64_t intr:8; + uint64_t reserved_0_23:24; + } s; + struct cvmx_npei_pcie_msi_rcv_b3_s cn52xx; + struct cvmx_npei_pcie_msi_rcv_b3_s cn52xxp1; + struct cvmx_npei_pcie_msi_rcv_b3_s cn56xx; + struct cvmx_npei_pcie_msi_rcv_b3_s cn56xxp1; +}; + +union cvmx_npei_pktx_cnts { + uint64_t u64; + struct cvmx_npei_pktx_cnts_s { + uint64_t reserved_54_63:10; + uint64_t timer:22; + uint64_t cnt:32; + } s; + struct cvmx_npei_pktx_cnts_s cn52xx; + struct cvmx_npei_pktx_cnts_s cn56xx; + struct cvmx_npei_pktx_cnts_s cn56xxp1; +}; + +union cvmx_npei_pktx_in_bp { + uint64_t u64; + struct cvmx_npei_pktx_in_bp_s { + uint64_t wmark:32; + uint64_t cnt:32; + } s; + struct cvmx_npei_pktx_in_bp_s cn52xx; + struct cvmx_npei_pktx_in_bp_s cn56xx; + struct cvmx_npei_pktx_in_bp_s cn56xxp1; +}; + +union cvmx_npei_pktx_instr_baddr { + uint64_t u64; + struct cvmx_npei_pktx_instr_baddr_s { + uint64_t addr:61; + uint64_t reserved_0_2:3; + } s; + struct cvmx_npei_pktx_instr_baddr_s cn52xx; + struct cvmx_npei_pktx_instr_baddr_s cn56xx; + struct cvmx_npei_pktx_instr_baddr_s cn56xxp1; +}; + +union cvmx_npei_pktx_instr_baoff_dbell { + uint64_t u64; + struct cvmx_npei_pktx_instr_baoff_dbell_s { + uint64_t aoff:32; + uint64_t dbell:32; + } s; + struct cvmx_npei_pktx_instr_baoff_dbell_s cn52xx; + struct cvmx_npei_pktx_instr_baoff_dbell_s cn56xx; + struct cvmx_npei_pktx_instr_baoff_dbell_s cn56xxp1; +}; + +union cvmx_npei_pktx_instr_fifo_rsize { + uint64_t u64; + struct cvmx_npei_pktx_instr_fifo_rsize_s { + uint64_t max:9; + uint64_t rrp:9; + uint64_t wrp:9; + uint64_t fcnt:5; + uint64_t rsize:32; + } s; + struct cvmx_npei_pktx_instr_fifo_rsize_s cn52xx; + struct cvmx_npei_pktx_instr_fifo_rsize_s cn56xx; + struct cvmx_npei_pktx_instr_fifo_rsize_s cn56xxp1; +}; + +union cvmx_npei_pktx_instr_header { + uint64_t u64; + struct cvmx_npei_pktx_instr_header_s { + uint64_t reserved_44_63:20; + uint64_t pbp:1; + uint64_t rsv_f:5; + uint64_t rparmode:2; + uint64_t rsv_e:1; + uint64_t rskp_len:7; + uint64_t rsv_d:6; + uint64_t use_ihdr:1; + uint64_t rsv_c:5; + uint64_t par_mode:2; + uint64_t rsv_b:1; + uint64_t skp_len:7; + uint64_t rsv_a:6; + } s; + struct cvmx_npei_pktx_instr_header_s cn52xx; + struct cvmx_npei_pktx_instr_header_s cn56xx; + struct cvmx_npei_pktx_instr_header_s cn56xxp1; +}; + +union cvmx_npei_pktx_slist_baddr { + uint64_t u64; + struct cvmx_npei_pktx_slist_baddr_s { + uint64_t addr:60; + uint64_t reserved_0_3:4; + } s; + struct cvmx_npei_pktx_slist_baddr_s cn52xx; + struct cvmx_npei_pktx_slist_baddr_s cn56xx; + struct cvmx_npei_pktx_slist_baddr_s cn56xxp1; +}; + +union cvmx_npei_pktx_slist_baoff_dbell { + uint64_t u64; + struct cvmx_npei_pktx_slist_baoff_dbell_s { + uint64_t aoff:32; + uint64_t dbell:32; + } s; + struct cvmx_npei_pktx_slist_baoff_dbell_s cn52xx; + struct cvmx_npei_pktx_slist_baoff_dbell_s cn56xx; + struct cvmx_npei_pktx_slist_baoff_dbell_s cn56xxp1; +}; + +union cvmx_npei_pktx_slist_fifo_rsize { + uint64_t u64; + struct cvmx_npei_pktx_slist_fifo_rsize_s { + uint64_t reserved_32_63:32; + uint64_t rsize:32; + } s; + struct cvmx_npei_pktx_slist_fifo_rsize_s cn52xx; + struct cvmx_npei_pktx_slist_fifo_rsize_s cn56xx; + struct cvmx_npei_pktx_slist_fifo_rsize_s cn56xxp1; +}; + +union cvmx_npei_pkt_cnt_int { + uint64_t u64; + struct cvmx_npei_pkt_cnt_int_s { + uint64_t reserved_32_63:32; + uint64_t port:32; + } s; + struct cvmx_npei_pkt_cnt_int_s cn52xx; + struct cvmx_npei_pkt_cnt_int_s cn56xx; + struct cvmx_npei_pkt_cnt_int_s cn56xxp1; +}; + +union cvmx_npei_pkt_cnt_int_enb { + uint64_t u64; + struct cvmx_npei_pkt_cnt_int_enb_s { + uint64_t reserved_32_63:32; + uint64_t port:32; + } s; + struct cvmx_npei_pkt_cnt_int_enb_s cn52xx; + struct cvmx_npei_pkt_cnt_int_enb_s cn56xx; + struct cvmx_npei_pkt_cnt_int_enb_s cn56xxp1; +}; + +union cvmx_npei_pkt_data_out_es { + uint64_t u64; + struct cvmx_npei_pkt_data_out_es_s { + uint64_t es:64; + } s; + struct cvmx_npei_pkt_data_out_es_s cn52xx; + struct cvmx_npei_pkt_data_out_es_s cn56xx; + struct cvmx_npei_pkt_data_out_es_s cn56xxp1; +}; + +union cvmx_npei_pkt_data_out_ns { + uint64_t u64; + struct cvmx_npei_pkt_data_out_ns_s { + uint64_t reserved_32_63:32; + uint64_t nsr:32; + } s; + struct cvmx_npei_pkt_data_out_ns_s cn52xx; + struct cvmx_npei_pkt_data_out_ns_s cn56xx; + struct cvmx_npei_pkt_data_out_ns_s cn56xxp1; +}; + +union cvmx_npei_pkt_data_out_ror { + uint64_t u64; + struct cvmx_npei_pkt_data_out_ror_s { + uint64_t reserved_32_63:32; + uint64_t ror:32; + } s; + struct cvmx_npei_pkt_data_out_ror_s cn52xx; + struct cvmx_npei_pkt_data_out_ror_s cn56xx; + struct cvmx_npei_pkt_data_out_ror_s cn56xxp1; +}; + +union cvmx_npei_pkt_dpaddr { + uint64_t u64; + struct cvmx_npei_pkt_dpaddr_s { + uint64_t reserved_32_63:32; + uint64_t dptr:32; + } s; + struct cvmx_npei_pkt_dpaddr_s cn52xx; + struct cvmx_npei_pkt_dpaddr_s cn56xx; + struct cvmx_npei_pkt_dpaddr_s cn56xxp1; +}; + +union cvmx_npei_pkt_in_bp { + uint64_t u64; + struct cvmx_npei_pkt_in_bp_s { + uint64_t reserved_32_63:32; + uint64_t bp:32; + } s; + struct cvmx_npei_pkt_in_bp_s cn56xx; +}; + +union cvmx_npei_pkt_in_donex_cnts { + uint64_t u64; + struct cvmx_npei_pkt_in_donex_cnts_s { + uint64_t reserved_32_63:32; + uint64_t cnt:32; + } s; + struct cvmx_npei_pkt_in_donex_cnts_s cn52xx; + struct cvmx_npei_pkt_in_donex_cnts_s cn56xx; + struct cvmx_npei_pkt_in_donex_cnts_s cn56xxp1; +}; + +union cvmx_npei_pkt_in_instr_counts { + uint64_t u64; + struct cvmx_npei_pkt_in_instr_counts_s { + uint64_t wr_cnt:32; + uint64_t rd_cnt:32; + } s; + struct cvmx_npei_pkt_in_instr_counts_s cn52xx; + struct cvmx_npei_pkt_in_instr_counts_s cn56xx; +}; + +union cvmx_npei_pkt_in_pcie_port { + uint64_t u64; + struct cvmx_npei_pkt_in_pcie_port_s { + uint64_t pp:64; + } s; + struct cvmx_npei_pkt_in_pcie_port_s cn52xx; + struct cvmx_npei_pkt_in_pcie_port_s cn56xx; +}; + +union cvmx_npei_pkt_input_control { + uint64_t u64; + struct cvmx_npei_pkt_input_control_s { + uint64_t reserved_23_63:41; + uint64_t pkt_rr:1; + uint64_t pbp_dhi:13; + uint64_t d_nsr:1; + uint64_t d_esr:2; + uint64_t d_ror:1; + uint64_t use_csr:1; + uint64_t nsr:1; + uint64_t esr:2; + uint64_t ror:1; + } s; + struct cvmx_npei_pkt_input_control_s cn52xx; + struct cvmx_npei_pkt_input_control_s cn56xx; + struct cvmx_npei_pkt_input_control_s cn56xxp1; +}; + +union cvmx_npei_pkt_instr_enb { + uint64_t u64; + struct cvmx_npei_pkt_instr_enb_s { + uint64_t reserved_32_63:32; + uint64_t enb:32; + } s; + struct cvmx_npei_pkt_instr_enb_s cn52xx; + struct cvmx_npei_pkt_instr_enb_s cn56xx; + struct cvmx_npei_pkt_instr_enb_s cn56xxp1; +}; + +union cvmx_npei_pkt_instr_rd_size { + uint64_t u64; + struct cvmx_npei_pkt_instr_rd_size_s { + uint64_t rdsize:64; + } s; + struct cvmx_npei_pkt_instr_rd_size_s cn52xx; + struct cvmx_npei_pkt_instr_rd_size_s cn56xx; +}; + +union cvmx_npei_pkt_instr_size { + uint64_t u64; + struct cvmx_npei_pkt_instr_size_s { + uint64_t reserved_32_63:32; + uint64_t is_64b:32; + } s; + struct cvmx_npei_pkt_instr_size_s cn52xx; + struct cvmx_npei_pkt_instr_size_s cn56xx; + struct cvmx_npei_pkt_instr_size_s cn56xxp1; +}; + +union cvmx_npei_pkt_int_levels { + uint64_t u64; + struct cvmx_npei_pkt_int_levels_s { + uint64_t reserved_54_63:10; + uint64_t time:22; + uint64_t cnt:32; + } s; + struct cvmx_npei_pkt_int_levels_s cn52xx; + struct cvmx_npei_pkt_int_levels_s cn56xx; + struct cvmx_npei_pkt_int_levels_s cn56xxp1; +}; + +union cvmx_npei_pkt_iptr { + uint64_t u64; + struct cvmx_npei_pkt_iptr_s { + uint64_t reserved_32_63:32; + uint64_t iptr:32; + } s; + struct cvmx_npei_pkt_iptr_s cn52xx; + struct cvmx_npei_pkt_iptr_s cn56xx; + struct cvmx_npei_pkt_iptr_s cn56xxp1; +}; + +union cvmx_npei_pkt_out_bmode { + uint64_t u64; + struct cvmx_npei_pkt_out_bmode_s { + uint64_t reserved_32_63:32; + uint64_t bmode:32; + } s; + struct cvmx_npei_pkt_out_bmode_s cn52xx; + struct cvmx_npei_pkt_out_bmode_s cn56xx; + struct cvmx_npei_pkt_out_bmode_s cn56xxp1; +}; + +union cvmx_npei_pkt_out_enb { + uint64_t u64; + struct cvmx_npei_pkt_out_enb_s { + uint64_t reserved_32_63:32; + uint64_t enb:32; + } s; + struct cvmx_npei_pkt_out_enb_s cn52xx; + struct cvmx_npei_pkt_out_enb_s cn56xx; + struct cvmx_npei_pkt_out_enb_s cn56xxp1; +}; + +union cvmx_npei_pkt_output_wmark { + uint64_t u64; + struct cvmx_npei_pkt_output_wmark_s { + uint64_t reserved_32_63:32; + uint64_t wmark:32; + } s; + struct cvmx_npei_pkt_output_wmark_s cn52xx; + struct cvmx_npei_pkt_output_wmark_s cn56xx; +}; + +union cvmx_npei_pkt_pcie_port { + uint64_t u64; + struct cvmx_npei_pkt_pcie_port_s { + uint64_t pp:64; + } s; + struct cvmx_npei_pkt_pcie_port_s cn52xx; + struct cvmx_npei_pkt_pcie_port_s cn56xx; + struct cvmx_npei_pkt_pcie_port_s cn56xxp1; +}; + +union cvmx_npei_pkt_port_in_rst { + uint64_t u64; + struct cvmx_npei_pkt_port_in_rst_s { + uint64_t in_rst:32; + uint64_t out_rst:32; + } s; + struct cvmx_npei_pkt_port_in_rst_s cn52xx; + struct cvmx_npei_pkt_port_in_rst_s cn56xx; +}; + +union cvmx_npei_pkt_slist_es { + uint64_t u64; + struct cvmx_npei_pkt_slist_es_s { + uint64_t es:64; + } s; + struct cvmx_npei_pkt_slist_es_s cn52xx; + struct cvmx_npei_pkt_slist_es_s cn56xx; + struct cvmx_npei_pkt_slist_es_s cn56xxp1; +}; + +union cvmx_npei_pkt_slist_id_size { + uint64_t u64; + struct cvmx_npei_pkt_slist_id_size_s { + uint64_t reserved_23_63:41; + uint64_t isize:7; + uint64_t bsize:16; + } s; + struct cvmx_npei_pkt_slist_id_size_s cn52xx; + struct cvmx_npei_pkt_slist_id_size_s cn56xx; + struct cvmx_npei_pkt_slist_id_size_s cn56xxp1; +}; + +union cvmx_npei_pkt_slist_ns { + uint64_t u64; + struct cvmx_npei_pkt_slist_ns_s { + uint64_t reserved_32_63:32; + uint64_t nsr:32; + } s; + struct cvmx_npei_pkt_slist_ns_s cn52xx; + struct cvmx_npei_pkt_slist_ns_s cn56xx; + struct cvmx_npei_pkt_slist_ns_s cn56xxp1; +}; + +union cvmx_npei_pkt_slist_ror { + uint64_t u64; + struct cvmx_npei_pkt_slist_ror_s { + uint64_t reserved_32_63:32; + uint64_t ror:32; + } s; + struct cvmx_npei_pkt_slist_ror_s cn52xx; + struct cvmx_npei_pkt_slist_ror_s cn56xx; + struct cvmx_npei_pkt_slist_ror_s cn56xxp1; +}; + +union cvmx_npei_pkt_time_int { + uint64_t u64; + struct cvmx_npei_pkt_time_int_s { + uint64_t reserved_32_63:32; + uint64_t port:32; + } s; + struct cvmx_npei_pkt_time_int_s cn52xx; + struct cvmx_npei_pkt_time_int_s cn56xx; + struct cvmx_npei_pkt_time_int_s cn56xxp1; +}; + +union cvmx_npei_pkt_time_int_enb { + uint64_t u64; + struct cvmx_npei_pkt_time_int_enb_s { + uint64_t reserved_32_63:32; + uint64_t port:32; + } s; + struct cvmx_npei_pkt_time_int_enb_s cn52xx; + struct cvmx_npei_pkt_time_int_enb_s cn56xx; + struct cvmx_npei_pkt_time_int_enb_s cn56xxp1; +}; + +union cvmx_npei_rsl_int_blocks { + uint64_t u64; + struct cvmx_npei_rsl_int_blocks_s { + uint64_t reserved_31_63:33; + uint64_t iob:1; + uint64_t lmc1:1; + uint64_t agl:1; + uint64_t reserved_24_27:4; + uint64_t asxpcs1:1; + uint64_t asxpcs0:1; + uint64_t reserved_21_21:1; + uint64_t pip:1; + uint64_t reserved_18_19:2; + uint64_t lmc0:1; + uint64_t l2c:1; + uint64_t usb1:1; + uint64_t rad:1; + uint64_t usb:1; + uint64_t pow:1; + uint64_t tim:1; + uint64_t pko:1; + uint64_t ipd:1; + uint64_t reserved_8_8:1; + uint64_t zip:1; + uint64_t reserved_6_6:1; + uint64_t fpa:1; + uint64_t key:1; + uint64_t npei:1; + uint64_t gmx1:1; + uint64_t gmx0:1; + uint64_t mio:1; + } s; + struct cvmx_npei_rsl_int_blocks_s cn52xx; + struct cvmx_npei_rsl_int_blocks_s cn52xxp1; + struct cvmx_npei_rsl_int_blocks_cn56xx { + uint64_t reserved_31_63:33; + uint64_t iob:1; + uint64_t lmc1:1; + uint64_t agl:1; + uint64_t reserved_24_27:4; + uint64_t asxpcs1:1; + uint64_t asxpcs0:1; + uint64_t reserved_21_21:1; + uint64_t pip:1; + uint64_t reserved_18_19:2; + uint64_t lmc0:1; + uint64_t l2c:1; + uint64_t reserved_15_15:1; + uint64_t rad:1; + uint64_t usb:1; + uint64_t pow:1; + uint64_t tim:1; + uint64_t pko:1; + uint64_t ipd:1; + uint64_t reserved_8_8:1; + uint64_t zip:1; + uint64_t reserved_6_6:1; + uint64_t fpa:1; + uint64_t key:1; + uint64_t npei:1; + uint64_t gmx1:1; + uint64_t gmx0:1; + uint64_t mio:1; + } cn56xx; + struct cvmx_npei_rsl_int_blocks_cn56xx cn56xxp1; +}; + +union cvmx_npei_scratch_1 { + uint64_t u64; + struct cvmx_npei_scratch_1_s { + uint64_t data:64; + } s; + struct cvmx_npei_scratch_1_s cn52xx; + struct cvmx_npei_scratch_1_s cn52xxp1; + struct cvmx_npei_scratch_1_s cn56xx; + struct cvmx_npei_scratch_1_s cn56xxp1; +}; + +union cvmx_npei_state1 { + uint64_t u64; + struct cvmx_npei_state1_s { + uint64_t cpl1:12; + uint64_t cpl0:12; + uint64_t arb:1; + uint64_t csr:39; + } s; + struct cvmx_npei_state1_s cn52xx; + struct cvmx_npei_state1_s cn52xxp1; + struct cvmx_npei_state1_s cn56xx; + struct cvmx_npei_state1_s cn56xxp1; +}; + +union cvmx_npei_state2 { + uint64_t u64; + struct cvmx_npei_state2_s { + uint64_t reserved_48_63:16; + uint64_t npei:1; + uint64_t rac:1; + uint64_t csm1:15; + uint64_t csm0:15; + uint64_t nnp0:8; + uint64_t nnd:8; + } s; + struct cvmx_npei_state2_s cn52xx; + struct cvmx_npei_state2_s cn52xxp1; + struct cvmx_npei_state2_s cn56xx; + struct cvmx_npei_state2_s cn56xxp1; +}; + +union cvmx_npei_state3 { + uint64_t u64; + struct cvmx_npei_state3_s { + uint64_t reserved_56_63:8; + uint64_t psm1:15; + uint64_t psm0:15; + uint64_t nsm1:13; + uint64_t nsm0:13; + } s; + struct cvmx_npei_state3_s cn52xx; + struct cvmx_npei_state3_s cn52xxp1; + struct cvmx_npei_state3_s cn56xx; + struct cvmx_npei_state3_s cn56xxp1; +}; + +union cvmx_npei_win_rd_addr { + uint64_t u64; + struct cvmx_npei_win_rd_addr_s { + uint64_t reserved_51_63:13; + uint64_t ld_cmd:2; + uint64_t iobit:1; + uint64_t rd_addr:48; + } s; + struct cvmx_npei_win_rd_addr_s cn52xx; + struct cvmx_npei_win_rd_addr_s cn52xxp1; + struct cvmx_npei_win_rd_addr_s cn56xx; + struct cvmx_npei_win_rd_addr_s cn56xxp1; +}; + +union cvmx_npei_win_rd_data { + uint64_t u64; + struct cvmx_npei_win_rd_data_s { + uint64_t rd_data:64; + } s; + struct cvmx_npei_win_rd_data_s cn52xx; + struct cvmx_npei_win_rd_data_s cn52xxp1; + struct cvmx_npei_win_rd_data_s cn56xx; + struct cvmx_npei_win_rd_data_s cn56xxp1; +}; + +union cvmx_npei_win_wr_addr { + uint64_t u64; + struct cvmx_npei_win_wr_addr_s { + uint64_t reserved_49_63:15; + uint64_t iobit:1; + uint64_t wr_addr:46; + uint64_t reserved_0_1:2; + } s; + struct cvmx_npei_win_wr_addr_s cn52xx; + struct cvmx_npei_win_wr_addr_s cn52xxp1; + struct cvmx_npei_win_wr_addr_s cn56xx; + struct cvmx_npei_win_wr_addr_s cn56xxp1; +}; + +union cvmx_npei_win_wr_data { + uint64_t u64; + struct cvmx_npei_win_wr_data_s { + uint64_t wr_data:64; + } s; + struct cvmx_npei_win_wr_data_s cn52xx; + struct cvmx_npei_win_wr_data_s cn52xxp1; + struct cvmx_npei_win_wr_data_s cn56xx; + struct cvmx_npei_win_wr_data_s cn56xxp1; +}; + +union cvmx_npei_win_wr_mask { + uint64_t u64; + struct cvmx_npei_win_wr_mask_s { + uint64_t reserved_8_63:56; + uint64_t wr_mask:8; + } s; + struct cvmx_npei_win_wr_mask_s cn52xx; + struct cvmx_npei_win_wr_mask_s cn52xxp1; + struct cvmx_npei_win_wr_mask_s cn56xx; + struct cvmx_npei_win_wr_mask_s cn56xxp1; +}; + +union cvmx_npei_window_ctl { + uint64_t u64; + struct cvmx_npei_window_ctl_s { + uint64_t reserved_32_63:32; + uint64_t time:32; + } s; + struct cvmx_npei_window_ctl_s cn52xx; + struct cvmx_npei_window_ctl_s cn52xxp1; + struct cvmx_npei_window_ctl_s cn56xx; + struct cvmx_npei_window_ctl_s cn56xxp1; +}; + +#endif diff --git a/arch/mips/include/asm/octeon/cvmx-npi-defs.h b/arch/mips/include/asm/octeon/cvmx-npi-defs.h new file mode 100644 index 0000000..4e03cd8 --- /dev/null +++ b/arch/mips/include/asm/octeon/cvmx-npi-defs.h @@ -0,0 +1,1735 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +#ifndef __CVMX_NPI_DEFS_H__ +#define __CVMX_NPI_DEFS_H__ + +#define CVMX_NPI_BASE_ADDR_INPUT0 \ + CVMX_ADD_IO_SEG(0x00011F0000000070ull) +#define CVMX_NPI_BASE_ADDR_INPUT1 \ + CVMX_ADD_IO_SEG(0x00011F0000000080ull) +#define CVMX_NPI_BASE_ADDR_INPUT2 \ + CVMX_ADD_IO_SEG(0x00011F0000000090ull) +#define CVMX_NPI_BASE_ADDR_INPUT3 \ + CVMX_ADD_IO_SEG(0x00011F00000000A0ull) +#define CVMX_NPI_BASE_ADDR_INPUTX(offset) \ + CVMX_ADD_IO_SEG(0x00011F0000000070ull + (((offset) & 3) * 16)) +#define CVMX_NPI_BASE_ADDR_OUTPUT0 \ + CVMX_ADD_IO_SEG(0x00011F00000000B8ull) +#define CVMX_NPI_BASE_ADDR_OUTPUT1 \ + CVMX_ADD_IO_SEG(0x00011F00000000C0ull) +#define CVMX_NPI_BASE_ADDR_OUTPUT2 \ + CVMX_ADD_IO_SEG(0x00011F00000000C8ull) +#define CVMX_NPI_BASE_ADDR_OUTPUT3 \ + CVMX_ADD_IO_SEG(0x00011F00000000D0ull) +#define CVMX_NPI_BASE_ADDR_OUTPUTX(offset) \ + CVMX_ADD_IO_SEG(0x00011F00000000B8ull + (((offset) & 3) * 8)) +#define CVMX_NPI_BIST_STATUS \ + CVMX_ADD_IO_SEG(0x00011F00000003F8ull) +#define CVMX_NPI_BUFF_SIZE_OUTPUT0 \ + CVMX_ADD_IO_SEG(0x00011F00000000E0ull) +#define CVMX_NPI_BUFF_SIZE_OUTPUT1 \ + CVMX_ADD_IO_SEG(0x00011F00000000E8ull) +#define CVMX_NPI_BUFF_SIZE_OUTPUT2 \ + CVMX_ADD_IO_SEG(0x00011F00000000F0ull) +#define CVMX_NPI_BUFF_SIZE_OUTPUT3 \ + CVMX_ADD_IO_SEG(0x00011F00000000F8ull) +#define CVMX_NPI_BUFF_SIZE_OUTPUTX(offset) \ + CVMX_ADD_IO_SEG(0x00011F00000000E0ull + (((offset) & 3) * 8)) +#define CVMX_NPI_COMP_CTL \ + CVMX_ADD_IO_SEG(0x00011F0000000218ull) +#define CVMX_NPI_CTL_STATUS \ + CVMX_ADD_IO_SEG(0x00011F0000000010ull) +#define CVMX_NPI_DBG_SELECT \ + CVMX_ADD_IO_SEG(0x00011F0000000008ull) +#define CVMX_NPI_DMA_CONTROL \ + CVMX_ADD_IO_SEG(0x00011F0000000128ull) +#define CVMX_NPI_DMA_HIGHP_COUNTS \ + CVMX_ADD_IO_SEG(0x00011F0000000148ull) +#define CVMX_NPI_DMA_HIGHP_NADDR \ + CVMX_ADD_IO_SEG(0x00011F0000000158ull) +#define CVMX_NPI_DMA_LOWP_COUNTS \ + CVMX_ADD_IO_SEG(0x00011F0000000140ull) +#define CVMX_NPI_DMA_LOWP_NADDR \ + CVMX_ADD_IO_SEG(0x00011F0000000150ull) +#define CVMX_NPI_HIGHP_DBELL \ + CVMX_ADD_IO_SEG(0x00011F0000000120ull) +#define CVMX_NPI_HIGHP_IBUFF_SADDR \ + CVMX_ADD_IO_SEG(0x00011F0000000110ull) +#define CVMX_NPI_INPUT_CONTROL \ + CVMX_ADD_IO_SEG(0x00011F0000000138ull) +#define CVMX_NPI_INT_ENB \ + CVMX_ADD_IO_SEG(0x00011F0000000020ull) +#define CVMX_NPI_INT_SUM \ + CVMX_ADD_IO_SEG(0x00011F0000000018ull) +#define CVMX_NPI_LOWP_DBELL \ + CVMX_ADD_IO_SEG(0x00011F0000000118ull) +#define CVMX_NPI_LOWP_IBUFF_SADDR \ + CVMX_ADD_IO_SEG(0x00011F0000000108ull) +#define CVMX_NPI_MEM_ACCESS_SUBID3 \ + CVMX_ADD_IO_SEG(0x00011F0000000028ull) +#define CVMX_NPI_MEM_ACCESS_SUBID4 \ + CVMX_ADD_IO_SEG(0x00011F0000000030ull) +#define CVMX_NPI_MEM_ACCESS_SUBID5 \ + CVMX_ADD_IO_SEG(0x00011F0000000038ull) +#define CVMX_NPI_MEM_ACCESS_SUBID6 \ + CVMX_ADD_IO_SEG(0x00011F0000000040ull) +#define CVMX_NPI_MEM_ACCESS_SUBIDX(offset) \ + CVMX_ADD_IO_SEG(0x00011F0000000028ull + (((offset) & 7) * 8) - 8 * 3) +#define CVMX_NPI_MSI_RCV \ + (0x0000000000000190ull) +#define CVMX_NPI_NPI_MSI_RCV \ + CVMX_ADD_IO_SEG(0x00011F0000001190ull) +#define CVMX_NPI_NUM_DESC_OUTPUT0 \ + CVMX_ADD_IO_SEG(0x00011F0000000050ull) +#define CVMX_NPI_NUM_DESC_OUTPUT1 \ + CVMX_ADD_IO_SEG(0x00011F0000000058ull) +#define CVMX_NPI_NUM_DESC_OUTPUT2 \ + CVMX_ADD_IO_SEG(0x00011F0000000060ull) +#define CVMX_NPI_NUM_DESC_OUTPUT3 \ + CVMX_ADD_IO_SEG(0x00011F0000000068ull) +#define CVMX_NPI_NUM_DESC_OUTPUTX(offset) \ + CVMX_ADD_IO_SEG(0x00011F0000000050ull + (((offset) & 3) * 8)) +#define CVMX_NPI_OUTPUT_CONTROL \ + CVMX_ADD_IO_SEG(0x00011F0000000100ull) +#define CVMX_NPI_P0_DBPAIR_ADDR \ + CVMX_ADD_IO_SEG(0x00011F0000000180ull) +#define CVMX_NPI_P0_INSTR_ADDR \ + CVMX_ADD_IO_SEG(0x00011F00000001C0ull) +#define CVMX_NPI_P0_INSTR_CNTS \ + CVMX_ADD_IO_SEG(0x00011F00000001A0ull) +#define CVMX_NPI_P0_PAIR_CNTS \ + CVMX_ADD_IO_SEG(0x00011F0000000160ull) +#define CVMX_NPI_P1_DBPAIR_ADDR \ + CVMX_ADD_IO_SEG(0x00011F0000000188ull) +#define CVMX_NPI_P1_INSTR_ADDR \ + CVMX_ADD_IO_SEG(0x00011F00000001C8ull) +#define CVMX_NPI_P1_INSTR_CNTS \ + CVMX_ADD_IO_SEG(0x00011F00000001A8ull) +#define CVMX_NPI_P1_PAIR_CNTS \ + CVMX_ADD_IO_SEG(0x00011F0000000168ull) +#define CVMX_NPI_P2_DBPAIR_ADDR \ + CVMX_ADD_IO_SEG(0x00011F0000000190ull) +#define CVMX_NPI_P2_INSTR_ADDR \ + CVMX_ADD_IO_SEG(0x00011F00000001D0ull) +#define CVMX_NPI_P2_INSTR_CNTS \ + CVMX_ADD_IO_SEG(0x00011F00000001B0ull) +#define CVMX_NPI_P2_PAIR_CNTS \ + CVMX_ADD_IO_SEG(0x00011F0000000170ull) +#define CVMX_NPI_P3_DBPAIR_ADDR \ + CVMX_ADD_IO_SEG(0x00011F0000000198ull) +#define CVMX_NPI_P3_INSTR_ADDR \ + CVMX_ADD_IO_SEG(0x00011F00000001D8ull) +#define CVMX_NPI_P3_INSTR_CNTS \ + CVMX_ADD_IO_SEG(0x00011F00000001B8ull) +#define CVMX_NPI_P3_PAIR_CNTS \ + CVMX_ADD_IO_SEG(0x00011F0000000178ull) +#define CVMX_NPI_PCI_BAR1_INDEXX(offset) \ + CVMX_ADD_IO_SEG(0x00011F0000001100ull + (((offset) & 31) * 4)) +#define CVMX_NPI_PCI_BIST_REG \ + CVMX_ADD_IO_SEG(0x00011F00000011C0ull) +#define CVMX_NPI_PCI_BURST_SIZE \ + CVMX_ADD_IO_SEG(0x00011F00000000D8ull) +#define CVMX_NPI_PCI_CFG00 \ + CVMX_ADD_IO_SEG(0x00011F0000001800ull) +#define CVMX_NPI_PCI_CFG01 \ + CVMX_ADD_IO_SEG(0x00011F0000001804ull) +#define CVMX_NPI_PCI_CFG02 \ + CVMX_ADD_IO_SEG(0x00011F0000001808ull) +#define CVMX_NPI_PCI_CFG03 \ + CVMX_ADD_IO_SEG(0x00011F000000180Cull) +#define CVMX_NPI_PCI_CFG04 \ + CVMX_ADD_IO_SEG(0x00011F0000001810ull) +#define CVMX_NPI_PCI_CFG05 \ + CVMX_ADD_IO_SEG(0x00011F0000001814ull) +#define CVMX_NPI_PCI_CFG06 \ + CVMX_ADD_IO_SEG(0x00011F0000001818ull) +#define CVMX_NPI_PCI_CFG07 \ + CVMX_ADD_IO_SEG(0x00011F000000181Cull) +#define CVMX_NPI_PCI_CFG08 \ + CVMX_ADD_IO_SEG(0x00011F0000001820ull) +#define CVMX_NPI_PCI_CFG09 \ + CVMX_ADD_IO_SEG(0x00011F0000001824ull) +#define CVMX_NPI_PCI_CFG10 \ + CVMX_ADD_IO_SEG(0x00011F0000001828ull) +#define CVMX_NPI_PCI_CFG11 \ + CVMX_ADD_IO_SEG(0x00011F000000182Cull) +#define CVMX_NPI_PCI_CFG12 \ + CVMX_ADD_IO_SEG(0x00011F0000001830ull) +#define CVMX_NPI_PCI_CFG13 \ + CVMX_ADD_IO_SEG(0x00011F0000001834ull) +#define CVMX_NPI_PCI_CFG15 \ + CVMX_ADD_IO_SEG(0x00011F000000183Cull) +#define CVMX_NPI_PCI_CFG16 \ + CVMX_ADD_IO_SEG(0x00011F0000001840ull) +#define CVMX_NPI_PCI_CFG17 \ + CVMX_ADD_IO_SEG(0x00011F0000001844ull) +#define CVMX_NPI_PCI_CFG18 \ + CVMX_ADD_IO_SEG(0x00011F0000001848ull) +#define CVMX_NPI_PCI_CFG19 \ + CVMX_ADD_IO_SEG(0x00011F000000184Cull) +#define CVMX_NPI_PCI_CFG20 \ + CVMX_ADD_IO_SEG(0x00011F0000001850ull) +#define CVMX_NPI_PCI_CFG21 \ + CVMX_ADD_IO_SEG(0x00011F0000001854ull) +#define CVMX_NPI_PCI_CFG22 \ + CVMX_ADD_IO_SEG(0x00011F0000001858ull) +#define CVMX_NPI_PCI_CFG56 \ + CVMX_ADD_IO_SEG(0x00011F00000018E0ull) +#define CVMX_NPI_PCI_CFG57 \ + CVMX_ADD_IO_SEG(0x00011F00000018E4ull) +#define CVMX_NPI_PCI_CFG58 \ + CVMX_ADD_IO_SEG(0x00011F00000018E8ull) +#define CVMX_NPI_PCI_CFG59 \ + CVMX_ADD_IO_SEG(0x00011F00000018ECull) +#define CVMX_NPI_PCI_CFG60 \ + CVMX_ADD_IO_SEG(0x00011F00000018F0ull) +#define CVMX_NPI_PCI_CFG61 \ + CVMX_ADD_IO_SEG(0x00011F00000018F4ull) +#define CVMX_NPI_PCI_CFG62 \ + CVMX_ADD_IO_SEG(0x00011F00000018F8ull) +#define CVMX_NPI_PCI_CFG63 \ + CVMX_ADD_IO_SEG(0x00011F00000018FCull) +#define CVMX_NPI_PCI_CNT_REG \ + CVMX_ADD_IO_SEG(0x00011F00000011B8ull) +#define CVMX_NPI_PCI_CTL_STATUS_2 \ + CVMX_ADD_IO_SEG(0x00011F000000118Cull) +#define CVMX_NPI_PCI_INT_ARB_CFG \ + CVMX_ADD_IO_SEG(0x00011F0000000130ull) +#define CVMX_NPI_PCI_INT_ENB2 \ + CVMX_ADD_IO_SEG(0x00011F00000011A0ull) +#define CVMX_NPI_PCI_INT_SUM2 \ + CVMX_ADD_IO_SEG(0x00011F0000001198ull) +#define CVMX_NPI_PCI_READ_CMD \ + CVMX_ADD_IO_SEG(0x00011F0000000048ull) +#define CVMX_NPI_PCI_READ_CMD_6 \ + CVMX_ADD_IO_SEG(0x00011F0000001180ull) +#define CVMX_NPI_PCI_READ_CMD_C \ + CVMX_ADD_IO_SEG(0x00011F0000001184ull) +#define CVMX_NPI_PCI_READ_CMD_E \ + CVMX_ADD_IO_SEG(0x00011F0000001188ull) +#define CVMX_NPI_PCI_SCM_REG \ + CVMX_ADD_IO_SEG(0x00011F00000011A8ull) +#define CVMX_NPI_PCI_TSR_REG \ + CVMX_ADD_IO_SEG(0x00011F00000011B0ull) +#define CVMX_NPI_PORT32_INSTR_HDR \ + CVMX_ADD_IO_SEG(0x00011F00000001F8ull) +#define CVMX_NPI_PORT33_INSTR_HDR \ + CVMX_ADD_IO_SEG(0x00011F0000000200ull) +#define CVMX_NPI_PORT34_INSTR_HDR \ + CVMX_ADD_IO_SEG(0x00011F0000000208ull) +#define CVMX_NPI_PORT35_INSTR_HDR \ + CVMX_ADD_IO_SEG(0x00011F0000000210ull) +#define CVMX_NPI_PORT_BP_CONTROL \ + CVMX_ADD_IO_SEG(0x00011F00000001F0ull) +#define CVMX_NPI_PX_DBPAIR_ADDR(offset) \ + CVMX_ADD_IO_SEG(0x00011F0000000180ull + (((offset) & 3) * 8)) +#define CVMX_NPI_PX_INSTR_ADDR(offset) \ + CVMX_ADD_IO_SEG(0x00011F00000001C0ull + (((offset) & 3) * 8)) +#define CVMX_NPI_PX_INSTR_CNTS(offset) \ + CVMX_ADD_IO_SEG(0x00011F00000001A0ull + (((offset) & 3) * 8)) +#define CVMX_NPI_PX_PAIR_CNTS(offset) \ + CVMX_ADD_IO_SEG(0x00011F0000000160ull + (((offset) & 3) * 8)) +#define CVMX_NPI_RSL_INT_BLOCKS \ + CVMX_ADD_IO_SEG(0x00011F0000000000ull) +#define CVMX_NPI_SIZE_INPUT0 \ + CVMX_ADD_IO_SEG(0x00011F0000000078ull) +#define CVMX_NPI_SIZE_INPUT1 \ + CVMX_ADD_IO_SEG(0x00011F0000000088ull) +#define CVMX_NPI_SIZE_INPUT2 \ + CVMX_ADD_IO_SEG(0x00011F0000000098ull) +#define CVMX_NPI_SIZE_INPUT3 \ + CVMX_ADD_IO_SEG(0x00011F00000000A8ull) +#define CVMX_NPI_SIZE_INPUTX(offset) \ + CVMX_ADD_IO_SEG(0x00011F0000000078ull + (((offset) & 3) * 16)) +#define CVMX_NPI_WIN_READ_TO \ + CVMX_ADD_IO_SEG(0x00011F00000001E0ull) + +union cvmx_npi_base_addr_inputx { + uint64_t u64; + struct cvmx_npi_base_addr_inputx_s { + uint64_t baddr:61; + uint64_t reserved_0_2:3; + } s; + struct cvmx_npi_base_addr_inputx_s cn30xx; + struct cvmx_npi_base_addr_inputx_s cn31xx; + struct cvmx_npi_base_addr_inputx_s cn38xx; + struct cvmx_npi_base_addr_inputx_s cn38xxp2; + struct cvmx_npi_base_addr_inputx_s cn50xx; + struct cvmx_npi_base_addr_inputx_s cn58xx; + struct cvmx_npi_base_addr_inputx_s cn58xxp1; +}; + +union cvmx_npi_base_addr_outputx { + uint64_t u64; + struct cvmx_npi_base_addr_outputx_s { + uint64_t baddr:61; + uint64_t reserved_0_2:3; + } s; + struct cvmx_npi_base_addr_outputx_s cn30xx; + struct cvmx_npi_base_addr_outputx_s cn31xx; + struct cvmx_npi_base_addr_outputx_s cn38xx; + struct cvmx_npi_base_addr_outputx_s cn38xxp2; + struct cvmx_npi_base_addr_outputx_s cn50xx; + struct cvmx_npi_base_addr_outputx_s cn58xx; + struct cvmx_npi_base_addr_outputx_s cn58xxp1; +}; + +union cvmx_npi_bist_status { + uint64_t u64; + struct cvmx_npi_bist_status_s { + uint64_t reserved_20_63:44; + uint64_t csr_bs:1; + uint64_t dif_bs:1; + uint64_t rdp_bs:1; + uint64_t pcnc_bs:1; + uint64_t pcn_bs:1; + uint64_t rdn_bs:1; + uint64_t pcac_bs:1; + uint64_t pcad_bs:1; + uint64_t rdnl_bs:1; + uint64_t pgf_bs:1; + uint64_t pig_bs:1; + uint64_t pof0_bs:1; + uint64_t pof1_bs:1; + uint64_t pof2_bs:1; + uint64_t pof3_bs:1; + uint64_t pos_bs:1; + uint64_t nus_bs:1; + uint64_t dob_bs:1; + uint64_t pdf_bs:1; + uint64_t dpi_bs:1; + } s; + struct cvmx_npi_bist_status_cn30xx { + uint64_t reserved_20_63:44; + uint64_t csr_bs:1; + uint64_t dif_bs:1; + uint64_t rdp_bs:1; + uint64_t pcnc_bs:1; + uint64_t pcn_bs:1; + uint64_t rdn_bs:1; + uint64_t pcac_bs:1; + uint64_t pcad_bs:1; + uint64_t rdnl_bs:1; + uint64_t pgf_bs:1; + uint64_t pig_bs:1; + uint64_t pof0_bs:1; + uint64_t reserved_5_7:3; + uint64_t pos_bs:1; + uint64_t nus_bs:1; + uint64_t dob_bs:1; + uint64_t pdf_bs:1; + uint64_t dpi_bs:1; + } cn30xx; + struct cvmx_npi_bist_status_s cn31xx; + struct cvmx_npi_bist_status_s cn38xx; + struct cvmx_npi_bist_status_s cn38xxp2; + struct cvmx_npi_bist_status_cn50xx { + uint64_t reserved_20_63:44; + uint64_t csr_bs:1; + uint64_t dif_bs:1; + uint64_t rdp_bs:1; + uint64_t pcnc_bs:1; + uint64_t pcn_bs:1; + uint64_t rdn_bs:1; + uint64_t pcac_bs:1; + uint64_t pcad_bs:1; + uint64_t rdnl_bs:1; + uint64_t pgf_bs:1; + uint64_t pig_bs:1; + uint64_t pof0_bs:1; + uint64_t pof1_bs:1; + uint64_t reserved_5_6:2; + uint64_t pos_bs:1; + uint64_t nus_bs:1; + uint64_t dob_bs:1; + uint64_t pdf_bs:1; + uint64_t dpi_bs:1; + } cn50xx; + struct cvmx_npi_bist_status_s cn58xx; + struct cvmx_npi_bist_status_s cn58xxp1; +}; + +union cvmx_npi_buff_size_outputx { + uint64_t u64; + struct cvmx_npi_buff_size_outputx_s { + uint64_t reserved_23_63:41; + uint64_t isize:7; + uint64_t bsize:16; + } s; + struct cvmx_npi_buff_size_outputx_s cn30xx; + struct cvmx_npi_buff_size_outputx_s cn31xx; + struct cvmx_npi_buff_size_outputx_s cn38xx; + struct cvmx_npi_buff_size_outputx_s cn38xxp2; + struct cvmx_npi_buff_size_outputx_s cn50xx; + struct cvmx_npi_buff_size_outputx_s cn58xx; + struct cvmx_npi_buff_size_outputx_s cn58xxp1; +}; + +union cvmx_npi_comp_ctl { + uint64_t u64; + struct cvmx_npi_comp_ctl_s { + uint64_t reserved_10_63:54; + uint64_t pctl:5; + uint64_t nctl:5; + } s; + struct cvmx_npi_comp_ctl_s cn50xx; + struct cvmx_npi_comp_ctl_s cn58xx; + struct cvmx_npi_comp_ctl_s cn58xxp1; +}; + +union cvmx_npi_ctl_status { + uint64_t u64; + struct cvmx_npi_ctl_status_s { + uint64_t reserved_63_63:1; + uint64_t chip_rev:8; + uint64_t dis_pniw:1; + uint64_t out3_enb:1; + uint64_t out2_enb:1; + uint64_t out1_enb:1; + uint64_t out0_enb:1; + uint64_t ins3_enb:1; + uint64_t ins2_enb:1; + uint64_t ins1_enb:1; + uint64_t ins0_enb:1; + uint64_t ins3_64b:1; + uint64_t ins2_64b:1; + uint64_t ins1_64b:1; + uint64_t ins0_64b:1; + uint64_t pci_wdis:1; + uint64_t wait_com:1; + uint64_t reserved_37_39:3; + uint64_t max_word:5; + uint64_t reserved_10_31:22; + uint64_t timer:10; + } s; + struct cvmx_npi_ctl_status_cn30xx { + uint64_t reserved_63_63:1; + uint64_t chip_rev:8; + uint64_t dis_pniw:1; + uint64_t reserved_51_53:3; + uint64_t out0_enb:1; + uint64_t reserved_47_49:3; + uint64_t ins0_enb:1; + uint64_t reserved_43_45:3; + uint64_t ins0_64b:1; + uint64_t pci_wdis:1; + uint64_t wait_com:1; + uint64_t reserved_37_39:3; + uint64_t max_word:5; + uint64_t reserved_10_31:22; + uint64_t timer:10; + } cn30xx; + struct cvmx_npi_ctl_status_cn31xx { + uint64_t reserved_63_63:1; + uint64_t chip_rev:8; + uint64_t dis_pniw:1; + uint64_t reserved_52_53:2; + uint64_t out1_enb:1; + uint64_t out0_enb:1; + uint64_t reserved_48_49:2; + uint64_t ins1_enb:1; + uint64_t ins0_enb:1; + uint64_t reserved_44_45:2; + uint64_t ins1_64b:1; + uint64_t ins0_64b:1; + uint64_t pci_wdis:1; + uint64_t wait_com:1; + uint64_t reserved_37_39:3; + uint64_t max_word:5; + uint64_t reserved_10_31:22; + uint64_t timer:10; + } cn31xx; + struct cvmx_npi_ctl_status_s cn38xx; + struct cvmx_npi_ctl_status_s cn38xxp2; + struct cvmx_npi_ctl_status_cn31xx cn50xx; + struct cvmx_npi_ctl_status_s cn58xx; + struct cvmx_npi_ctl_status_s cn58xxp1; +}; + +union cvmx_npi_dbg_select { + uint64_t u64; + struct cvmx_npi_dbg_select_s { + uint64_t reserved_16_63:48; + uint64_t dbg_sel:16; + } s; + struct cvmx_npi_dbg_select_s cn30xx; + struct cvmx_npi_dbg_select_s cn31xx; + struct cvmx_npi_dbg_select_s cn38xx; + struct cvmx_npi_dbg_select_s cn38xxp2; + struct cvmx_npi_dbg_select_s cn50xx; + struct cvmx_npi_dbg_select_s cn58xx; + struct cvmx_npi_dbg_select_s cn58xxp1; +}; + +union cvmx_npi_dma_control { + uint64_t u64; + struct cvmx_npi_dma_control_s { + uint64_t reserved_36_63:28; + uint64_t b0_lend:1; + uint64_t dwb_denb:1; + uint64_t dwb_ichk:9; + uint64_t fpa_que:3; + uint64_t o_add1:1; + uint64_t o_ro:1; + uint64_t o_ns:1; + uint64_t o_es:2; + uint64_t o_mode:1; + uint64_t hp_enb:1; + uint64_t lp_enb:1; + uint64_t csize:14; + } s; + struct cvmx_npi_dma_control_s cn30xx; + struct cvmx_npi_dma_control_s cn31xx; + struct cvmx_npi_dma_control_s cn38xx; + struct cvmx_npi_dma_control_s cn38xxp2; + struct cvmx_npi_dma_control_s cn50xx; + struct cvmx_npi_dma_control_s cn58xx; + struct cvmx_npi_dma_control_s cn58xxp1; +}; + +union cvmx_npi_dma_highp_counts { + uint64_t u64; + struct cvmx_npi_dma_highp_counts_s { + uint64_t reserved_39_63:25; + uint64_t fcnt:7; + uint64_t dbell:32; + } s; + struct cvmx_npi_dma_highp_counts_s cn30xx; + struct cvmx_npi_dma_highp_counts_s cn31xx; + struct cvmx_npi_dma_highp_counts_s cn38xx; + struct cvmx_npi_dma_highp_counts_s cn38xxp2; + struct cvmx_npi_dma_highp_counts_s cn50xx; + struct cvmx_npi_dma_highp_counts_s cn58xx; + struct cvmx_npi_dma_highp_counts_s cn58xxp1; +}; + +union cvmx_npi_dma_highp_naddr { + uint64_t u64; + struct cvmx_npi_dma_highp_naddr_s { + uint64_t reserved_40_63:24; + uint64_t state:4; + uint64_t addr:36; + } s; + struct cvmx_npi_dma_highp_naddr_s cn30xx; + struct cvmx_npi_dma_highp_naddr_s cn31xx; + struct cvmx_npi_dma_highp_naddr_s cn38xx; + struct cvmx_npi_dma_highp_naddr_s cn38xxp2; + struct cvmx_npi_dma_highp_naddr_s cn50xx; + struct cvmx_npi_dma_highp_naddr_s cn58xx; + struct cvmx_npi_dma_highp_naddr_s cn58xxp1; +}; + +union cvmx_npi_dma_lowp_counts { + uint64_t u64; + struct cvmx_npi_dma_lowp_counts_s { + uint64_t reserved_39_63:25; + uint64_t fcnt:7; + uint64_t dbell:32; + } s; + struct cvmx_npi_dma_lowp_counts_s cn30xx; + struct cvmx_npi_dma_lowp_counts_s cn31xx; + struct cvmx_npi_dma_lowp_counts_s cn38xx; + struct cvmx_npi_dma_lowp_counts_s cn38xxp2; + struct cvmx_npi_dma_lowp_counts_s cn50xx; + struct cvmx_npi_dma_lowp_counts_s cn58xx; + struct cvmx_npi_dma_lowp_counts_s cn58xxp1; +}; + +union cvmx_npi_dma_lowp_naddr { + uint64_t u64; + struct cvmx_npi_dma_lowp_naddr_s { + uint64_t reserved_40_63:24; + uint64_t state:4; + uint64_t addr:36; + } s; + struct cvmx_npi_dma_lowp_naddr_s cn30xx; + struct cvmx_npi_dma_lowp_naddr_s cn31xx; + struct cvmx_npi_dma_lowp_naddr_s cn38xx; + struct cvmx_npi_dma_lowp_naddr_s cn38xxp2; + struct cvmx_npi_dma_lowp_naddr_s cn50xx; + struct cvmx_npi_dma_lowp_naddr_s cn58xx; + struct cvmx_npi_dma_lowp_naddr_s cn58xxp1; +}; + +union cvmx_npi_highp_dbell { + uint64_t u64; + struct cvmx_npi_highp_dbell_s { + uint64_t reserved_16_63:48; + uint64_t dbell:16; + } s; + struct cvmx_npi_highp_dbell_s cn30xx; + struct cvmx_npi_highp_dbell_s cn31xx; + struct cvmx_npi_highp_dbell_s cn38xx; + struct cvmx_npi_highp_dbell_s cn38xxp2; + struct cvmx_npi_highp_dbell_s cn50xx; + struct cvmx_npi_highp_dbell_s cn58xx; + struct cvmx_npi_highp_dbell_s cn58xxp1; +}; + +union cvmx_npi_highp_ibuff_saddr { + uint64_t u64; + struct cvmx_npi_highp_ibuff_saddr_s { + uint64_t reserved_36_63:28; + uint64_t saddr:36; + } s; + struct cvmx_npi_highp_ibuff_saddr_s cn30xx; + struct cvmx_npi_highp_ibuff_saddr_s cn31xx; + struct cvmx_npi_highp_ibuff_saddr_s cn38xx; + struct cvmx_npi_highp_ibuff_saddr_s cn38xxp2; + struct cvmx_npi_highp_ibuff_saddr_s cn50xx; + struct cvmx_npi_highp_ibuff_saddr_s cn58xx; + struct cvmx_npi_highp_ibuff_saddr_s cn58xxp1; +}; + +union cvmx_npi_input_control { + uint64_t u64; + struct cvmx_npi_input_control_s { + uint64_t reserved_23_63:41; + uint64_t pkt_rr:1; + uint64_t pbp_dhi:13; + uint64_t d_nsr:1; + uint64_t d_esr:2; + uint64_t d_ror:1; + uint64_t use_csr:1; + uint64_t nsr:1; + uint64_t esr:2; + uint64_t ror:1; + } s; + struct cvmx_npi_input_control_cn30xx { + uint64_t reserved_22_63:42; + uint64_t pbp_dhi:13; + uint64_t d_nsr:1; + uint64_t d_esr:2; + uint64_t d_ror:1; + uint64_t use_csr:1; + uint64_t nsr:1; + uint64_t esr:2; + uint64_t ror:1; + } cn30xx; + struct cvmx_npi_input_control_cn30xx cn31xx; + struct cvmx_npi_input_control_s cn38xx; + struct cvmx_npi_input_control_cn30xx cn38xxp2; + struct cvmx_npi_input_control_s cn50xx; + struct cvmx_npi_input_control_s cn58xx; + struct cvmx_npi_input_control_s cn58xxp1; +}; + +union cvmx_npi_int_enb { + uint64_t u64; + struct cvmx_npi_int_enb_s { + uint64_t reserved_62_63:2; + uint64_t q1_a_f:1; + uint64_t q1_s_e:1; + uint64_t pdf_p_f:1; + uint64_t pdf_p_e:1; + uint64_t pcf_p_f:1; + uint64_t pcf_p_e:1; + uint64_t rdx_s_e:1; + uint64_t rwx_s_e:1; + uint64_t pnc_a_f:1; + uint64_t pnc_s_e:1; + uint64_t com_a_f:1; + uint64_t com_s_e:1; + uint64_t q3_a_f:1; + uint64_t q3_s_e:1; + uint64_t q2_a_f:1; + uint64_t q2_s_e:1; + uint64_t pcr_a_f:1; + uint64_t pcr_s_e:1; + uint64_t fcr_a_f:1; + uint64_t fcr_s_e:1; + uint64_t iobdma:1; + uint64_t p_dperr:1; + uint64_t win_rto:1; + uint64_t i3_pperr:1; + uint64_t i2_pperr:1; + uint64_t i1_pperr:1; + uint64_t i0_pperr:1; + uint64_t p3_ptout:1; + uint64_t p2_ptout:1; + uint64_t p1_ptout:1; + uint64_t p0_ptout:1; + uint64_t p3_pperr:1; + uint64_t p2_pperr:1; + uint64_t p1_pperr:1; + uint64_t p0_pperr:1; + uint64_t g3_rtout:1; + uint64_t g2_rtout:1; + uint64_t g1_rtout:1; + uint64_t g0_rtout:1; + uint64_t p3_perr:1; + uint64_t p2_perr:1; + uint64_t p1_perr:1; + uint64_t p0_perr:1; + uint64_t p3_rtout:1; + uint64_t p2_rtout:1; + uint64_t p1_rtout:1; + uint64_t p0_rtout:1; + uint64_t i3_overf:1; + uint64_t i2_overf:1; + uint64_t i1_overf:1; + uint64_t i0_overf:1; + uint64_t i3_rtout:1; + uint64_t i2_rtout:1; + uint64_t i1_rtout:1; + uint64_t i0_rtout:1; + uint64_t po3_2sml:1; + uint64_t po2_2sml:1; + uint64_t po1_2sml:1; + uint64_t po0_2sml:1; + uint64_t pci_rsl:1; + uint64_t rml_wto:1; + uint64_t rml_rto:1; + } s; + struct cvmx_npi_int_enb_cn30xx { + uint64_t reserved_62_63:2; + uint64_t q1_a_f:1; + uint64_t q1_s_e:1; + uint64_t pdf_p_f:1; + uint64_t pdf_p_e:1; + uint64_t pcf_p_f:1; + uint64_t pcf_p_e:1; + uint64_t rdx_s_e:1; + uint64_t rwx_s_e:1; + uint64_t pnc_a_f:1; + uint64_t pnc_s_e:1; + uint64_t com_a_f:1; + uint64_t com_s_e:1; + uint64_t q3_a_f:1; + uint64_t q3_s_e:1; + uint64_t q2_a_f:1; + uint64_t q2_s_e:1; + uint64_t pcr_a_f:1; + uint64_t pcr_s_e:1; + uint64_t fcr_a_f:1; + uint64_t fcr_s_e:1; + uint64_t iobdma:1; + uint64_t p_dperr:1; + uint64_t win_rto:1; + uint64_t reserved_36_38:3; + uint64_t i0_pperr:1; + uint64_t reserved_32_34:3; + uint64_t p0_ptout:1; + uint64_t reserved_28_30:3; + uint64_t p0_pperr:1; + uint64_t reserved_24_26:3; + uint64_t g0_rtout:1; + uint64_t reserved_20_22:3; + uint64_t p0_perr:1; + uint64_t reserved_16_18:3; + uint64_t p0_rtout:1; + uint64_t reserved_12_14:3; + uint64_t i0_overf:1; + uint64_t reserved_8_10:3; + uint64_t i0_rtout:1; + uint64_t reserved_4_6:3; + uint64_t po0_2sml:1; + uint64_t pci_rsl:1; + uint64_t rml_wto:1; + uint64_t rml_rto:1; + } cn30xx; + struct cvmx_npi_int_enb_cn31xx { + uint64_t reserved_62_63:2; + uint64_t q1_a_f:1; + uint64_t q1_s_e:1; + uint64_t pdf_p_f:1; + uint64_t pdf_p_e:1; + uint64_t pcf_p_f:1; + uint64_t pcf_p_e:1; + uint64_t rdx_s_e:1; + uint64_t rwx_s_e:1; + uint64_t pnc_a_f:1; + uint64_t pnc_s_e:1; + uint64_t com_a_f:1; + uint64_t com_s_e:1; + uint64_t q3_a_f:1; + uint64_t q3_s_e:1; + uint64_t q2_a_f:1; + uint64_t q2_s_e:1; + uint64_t pcr_a_f:1; + uint64_t pcr_s_e:1; + uint64_t fcr_a_f:1; + uint64_t fcr_s_e:1; + uint64_t iobdma:1; + uint64_t p_dperr:1; + uint64_t win_rto:1; + uint64_t reserved_37_38:2; + uint64_t i1_pperr:1; + uint64_t i0_pperr:1; + uint64_t reserved_33_34:2; + uint64_t p1_ptout:1; + uint64_t p0_ptout:1; + uint64_t reserved_29_30:2; + uint64_t p1_pperr:1; + uint64_t p0_pperr:1; + uint64_t reserved_25_26:2; + uint64_t g1_rtout:1; + uint64_t g0_rtout:1; + uint64_t reserved_21_22:2; + uint64_t p1_perr:1; + uint64_t p0_perr:1; + uint64_t reserved_17_18:2; + uint64_t p1_rtout:1; + uint64_t p0_rtout:1; + uint64_t reserved_13_14:2; + uint64_t i1_overf:1; + uint64_t i0_overf:1; + uint64_t reserved_9_10:2; + uint64_t i1_rtout:1; + uint64_t i0_rtout:1; + uint64_t reserved_5_6:2; + uint64_t po1_2sml:1; + uint64_t po0_2sml:1; + uint64_t pci_rsl:1; + uint64_t rml_wto:1; + uint64_t rml_rto:1; + } cn31xx; + struct cvmx_npi_int_enb_s cn38xx; + struct cvmx_npi_int_enb_cn38xxp2 { + uint64_t reserved_42_63:22; + uint64_t iobdma:1; + uint64_t p_dperr:1; + uint64_t win_rto:1; + uint64_t i3_pperr:1; + uint64_t i2_pperr:1; + uint64_t i1_pperr:1; + uint64_t i0_pperr:1; + uint64_t p3_ptout:1; + uint64_t p2_ptout:1; + uint64_t p1_ptout:1; + uint64_t p0_ptout:1; + uint64_t p3_pperr:1; + uint64_t p2_pperr:1; + uint64_t p1_pperr:1; + uint64_t p0_pperr:1; + uint64_t g3_rtout:1; + uint64_t g2_rtout:1; + uint64_t g1_rtout:1; + uint64_t g0_rtout:1; + uint64_t p3_perr:1; + uint64_t p2_perr:1; + uint64_t p1_perr:1; + uint64_t p0_perr:1; + uint64_t p3_rtout:1; + uint64_t p2_rtout:1; + uint64_t p1_rtout:1; + uint64_t p0_rtout:1; + uint64_t i3_overf:1; + uint64_t i2_overf:1; + uint64_t i1_overf:1; + uint64_t i0_overf:1; + uint64_t i3_rtout:1; + uint64_t i2_rtout:1; + uint64_t i1_rtout:1; + uint64_t i0_rtout:1; + uint64_t po3_2sml:1; + uint64_t po2_2sml:1; + uint64_t po1_2sml:1; + uint64_t po0_2sml:1; + uint64_t pci_rsl:1; + uint64_t rml_wto:1; + uint64_t rml_rto:1; + } cn38xxp2; + struct cvmx_npi_int_enb_cn31xx cn50xx; + struct cvmx_npi_int_enb_s cn58xx; + struct cvmx_npi_int_enb_s cn58xxp1; +}; + +union cvmx_npi_int_sum { + uint64_t u64; + struct cvmx_npi_int_sum_s { + uint64_t reserved_62_63:2; + uint64_t q1_a_f:1; + uint64_t q1_s_e:1; + uint64_t pdf_p_f:1; + uint64_t pdf_p_e:1; + uint64_t pcf_p_f:1; + uint64_t pcf_p_e:1; + uint64_t rdx_s_e:1; + uint64_t rwx_s_e:1; + uint64_t pnc_a_f:1; + uint64_t pnc_s_e:1; + uint64_t com_a_f:1; + uint64_t com_s_e:1; + uint64_t q3_a_f:1; + uint64_t q3_s_e:1; + uint64_t q2_a_f:1; + uint64_t q2_s_e:1; + uint64_t pcr_a_f:1; + uint64_t pcr_s_e:1; + uint64_t fcr_a_f:1; + uint64_t fcr_s_e:1; + uint64_t iobdma:1; + uint64_t p_dperr:1; + uint64_t win_rto:1; + uint64_t i3_pperr:1; + uint64_t i2_pperr:1; + uint64_t i1_pperr:1; + uint64_t i0_pperr:1; + uint64_t p3_ptout:1; + uint64_t p2_ptout:1; + uint64_t p1_ptout:1; + uint64_t p0_ptout:1; + uint64_t p3_pperr:1; + uint64_t p2_pperr:1; + uint64_t p1_pperr:1; + uint64_t p0_pperr:1; + uint64_t g3_rtout:1; + uint64_t g2_rtout:1; + uint64_t g1_rtout:1; + uint64_t g0_rtout:1; + uint64_t p3_perr:1; + uint64_t p2_perr:1; + uint64_t p1_perr:1; + uint64_t p0_perr:1; + uint64_t p3_rtout:1; + uint64_t p2_rtout:1; + uint64_t p1_rtout:1; + uint64_t p0_rtout:1; + uint64_t i3_overf:1; + uint64_t i2_overf:1; + uint64_t i1_overf:1; + uint64_t i0_overf:1; + uint64_t i3_rtout:1; + uint64_t i2_rtout:1; + uint64_t i1_rtout:1; + uint64_t i0_rtout:1; + uint64_t po3_2sml:1; + uint64_t po2_2sml:1; + uint64_t po1_2sml:1; + uint64_t po0_2sml:1; + uint64_t pci_rsl:1; + uint64_t rml_wto:1; + uint64_t rml_rto:1; + } s; + struct cvmx_npi_int_sum_cn30xx { + uint64_t reserved_62_63:2; + uint64_t q1_a_f:1; + uint64_t q1_s_e:1; + uint64_t pdf_p_f:1; + uint64_t pdf_p_e:1; + uint64_t pcf_p_f:1; + uint64_t pcf_p_e:1; + uint64_t rdx_s_e:1; + uint64_t rwx_s_e:1; + uint64_t pnc_a_f:1; + uint64_t pnc_s_e:1; + uint64_t com_a_f:1; + uint64_t com_s_e:1; + uint64_t q3_a_f:1; + uint64_t q3_s_e:1; + uint64_t q2_a_f:1; + uint64_t q2_s_e:1; + uint64_t pcr_a_f:1; + uint64_t pcr_s_e:1; + uint64_t fcr_a_f:1; + uint64_t fcr_s_e:1; + uint64_t iobdma:1; + uint64_t p_dperr:1; + uint64_t win_rto:1; + uint64_t reserved_36_38:3; + uint64_t i0_pperr:1; + uint64_t reserved_32_34:3; + uint64_t p0_ptout:1; + uint64_t reserved_28_30:3; + uint64_t p0_pperr:1; + uint64_t reserved_24_26:3; + uint64_t g0_rtout:1; + uint64_t reserved_20_22:3; + uint64_t p0_perr:1; + uint64_t reserved_16_18:3; + uint64_t p0_rtout:1; + uint64_t reserved_12_14:3; + uint64_t i0_overf:1; + uint64_t reserved_8_10:3; + uint64_t i0_rtout:1; + uint64_t reserved_4_6:3; + uint64_t po0_2sml:1; + uint64_t pci_rsl:1; + uint64_t rml_wto:1; + uint64_t rml_rto:1; + } cn30xx; + struct cvmx_npi_int_sum_cn31xx { + uint64_t reserved_62_63:2; + uint64_t q1_a_f:1; + uint64_t q1_s_e:1; + uint64_t pdf_p_f:1; + uint64_t pdf_p_e:1; + uint64_t pcf_p_f:1; + uint64_t pcf_p_e:1; + uint64_t rdx_s_e:1; + uint64_t rwx_s_e:1; + uint64_t pnc_a_f:1; + uint64_t pnc_s_e:1; + uint64_t com_a_f:1; + uint64_t com_s_e:1; + uint64_t q3_a_f:1; + uint64_t q3_s_e:1; + uint64_t q2_a_f:1; + uint64_t q2_s_e:1; + uint64_t pcr_a_f:1; + uint64_t pcr_s_e:1; + uint64_t fcr_a_f:1; + uint64_t fcr_s_e:1; + uint64_t iobdma:1; + uint64_t p_dperr:1; + uint64_t win_rto:1; + uint64_t reserved_37_38:2; + uint64_t i1_pperr:1; + uint64_t i0_pperr:1; + uint64_t reserved_33_34:2; + uint64_t p1_ptout:1; + uint64_t p0_ptout:1; + uint64_t reserved_29_30:2; + uint64_t p1_pperr:1; + uint64_t p0_pperr:1; + uint64_t reserved_25_26:2; + uint64_t g1_rtout:1; + uint64_t g0_rtout:1; + uint64_t reserved_21_22:2; + uint64_t p1_perr:1; + uint64_t p0_perr:1; + uint64_t reserved_17_18:2; + uint64_t p1_rtout:1; + uint64_t p0_rtout:1; + uint64_t reserved_13_14:2; + uint64_t i1_overf:1; + uint64_t i0_overf:1; + uint64_t reserved_9_10:2; + uint64_t i1_rtout:1; + uint64_t i0_rtout:1; + uint64_t reserved_5_6:2; + uint64_t po1_2sml:1; + uint64_t po0_2sml:1; + uint64_t pci_rsl:1; + uint64_t rml_wto:1; + uint64_t rml_rto:1; + } cn31xx; + struct cvmx_npi_int_sum_s cn38xx; + struct cvmx_npi_int_sum_cn38xxp2 { + uint64_t reserved_42_63:22; + uint64_t iobdma:1; + uint64_t p_dperr:1; + uint64_t win_rto:1; + uint64_t i3_pperr:1; + uint64_t i2_pperr:1; + uint64_t i1_pperr:1; + uint64_t i0_pperr:1; + uint64_t p3_ptout:1; + uint64_t p2_ptout:1; + uint64_t p1_ptout:1; + uint64_t p0_ptout:1; + uint64_t p3_pperr:1; + uint64_t p2_pperr:1; + uint64_t p1_pperr:1; + uint64_t p0_pperr:1; + uint64_t g3_rtout:1; + uint64_t g2_rtout:1; + uint64_t g1_rtout:1; + uint64_t g0_rtout:1; + uint64_t p3_perr:1; + uint64_t p2_perr:1; + uint64_t p1_perr:1; + uint64_t p0_perr:1; + uint64_t p3_rtout:1; + uint64_t p2_rtout:1; + uint64_t p1_rtout:1; + uint64_t p0_rtout:1; + uint64_t i3_overf:1; + uint64_t i2_overf:1; + uint64_t i1_overf:1; + uint64_t i0_overf:1; + uint64_t i3_rtout:1; + uint64_t i2_rtout:1; + uint64_t i1_rtout:1; + uint64_t i0_rtout:1; + uint64_t po3_2sml:1; + uint64_t po2_2sml:1; + uint64_t po1_2sml:1; + uint64_t po0_2sml:1; + uint64_t pci_rsl:1; + uint64_t rml_wto:1; + uint64_t rml_rto:1; + } cn38xxp2; + struct cvmx_npi_int_sum_cn31xx cn50xx; + struct cvmx_npi_int_sum_s cn58xx; + struct cvmx_npi_int_sum_s cn58xxp1; +}; + +union cvmx_npi_lowp_dbell { + uint64_t u64; + struct cvmx_npi_lowp_dbell_s { + uint64_t reserved_16_63:48; + uint64_t dbell:16; + } s; + struct cvmx_npi_lowp_dbell_s cn30xx; + struct cvmx_npi_lowp_dbell_s cn31xx; + struct cvmx_npi_lowp_dbell_s cn38xx; + struct cvmx_npi_lowp_dbell_s cn38xxp2; + struct cvmx_npi_lowp_dbell_s cn50xx; + struct cvmx_npi_lowp_dbell_s cn58xx; + struct cvmx_npi_lowp_dbell_s cn58xxp1; +}; + +union cvmx_npi_lowp_ibuff_saddr { + uint64_t u64; + struct cvmx_npi_lowp_ibuff_saddr_s { + uint64_t reserved_36_63:28; + uint64_t saddr:36; + } s; + struct cvmx_npi_lowp_ibuff_saddr_s cn30xx; + struct cvmx_npi_lowp_ibuff_saddr_s cn31xx; + struct cvmx_npi_lowp_ibuff_saddr_s cn38xx; + struct cvmx_npi_lowp_ibuff_saddr_s cn38xxp2; + struct cvmx_npi_lowp_ibuff_saddr_s cn50xx; + struct cvmx_npi_lowp_ibuff_saddr_s cn58xx; + struct cvmx_npi_lowp_ibuff_saddr_s cn58xxp1; +}; + +union cvmx_npi_mem_access_subidx { + uint64_t u64; + struct cvmx_npi_mem_access_subidx_s { + uint64_t reserved_38_63:26; + uint64_t shortl:1; + uint64_t nmerge:1; + uint64_t esr:2; + uint64_t esw:2; + uint64_t nsr:1; + uint64_t nsw:1; + uint64_t ror:1; + uint64_t row:1; + uint64_t ba:28; + } s; + struct cvmx_npi_mem_access_subidx_s cn30xx; + struct cvmx_npi_mem_access_subidx_cn31xx { + uint64_t reserved_36_63:28; + uint64_t esr:2; + uint64_t esw:2; + uint64_t nsr:1; + uint64_t nsw:1; + uint64_t ror:1; + uint64_t row:1; + uint64_t ba:28; + } cn31xx; + struct cvmx_npi_mem_access_subidx_s cn38xx; + struct cvmx_npi_mem_access_subidx_cn31xx cn38xxp2; + struct cvmx_npi_mem_access_subidx_s cn50xx; + struct cvmx_npi_mem_access_subidx_s cn58xx; + struct cvmx_npi_mem_access_subidx_s cn58xxp1; +}; + +union cvmx_npi_msi_rcv { + uint64_t u64; + struct cvmx_npi_msi_rcv_s { + uint64_t int_vec:64; + } s; + struct cvmx_npi_msi_rcv_s cn30xx; + struct cvmx_npi_msi_rcv_s cn31xx; + struct cvmx_npi_msi_rcv_s cn38xx; + struct cvmx_npi_msi_rcv_s cn38xxp2; + struct cvmx_npi_msi_rcv_s cn50xx; + struct cvmx_npi_msi_rcv_s cn58xx; + struct cvmx_npi_msi_rcv_s cn58xxp1; +}; + +union cvmx_npi_num_desc_outputx { + uint64_t u64; + struct cvmx_npi_num_desc_outputx_s { + uint64_t reserved_32_63:32; + uint64_t size:32; + } s; + struct cvmx_npi_num_desc_outputx_s cn30xx; + struct cvmx_npi_num_desc_outputx_s cn31xx; + struct cvmx_npi_num_desc_outputx_s cn38xx; + struct cvmx_npi_num_desc_outputx_s cn38xxp2; + struct cvmx_npi_num_desc_outputx_s cn50xx; + struct cvmx_npi_num_desc_outputx_s cn58xx; + struct cvmx_npi_num_desc_outputx_s cn58xxp1; +}; + +union cvmx_npi_output_control { + uint64_t u64; + struct cvmx_npi_output_control_s { + uint64_t reserved_49_63:15; + uint64_t pkt_rr:1; + uint64_t p3_bmode:1; + uint64_t p2_bmode:1; + uint64_t p1_bmode:1; + uint64_t p0_bmode:1; + uint64_t o3_es:2; + uint64_t o3_ns:1; + uint64_t o3_ro:1; + uint64_t o2_es:2; + uint64_t o2_ns:1; + uint64_t o2_ro:1; + uint64_t o1_es:2; + uint64_t o1_ns:1; + uint64_t o1_ro:1; + uint64_t o0_es:2; + uint64_t o0_ns:1; + uint64_t o0_ro:1; + uint64_t o3_csrm:1; + uint64_t o2_csrm:1; + uint64_t o1_csrm:1; + uint64_t o0_csrm:1; + uint64_t reserved_20_23:4; + uint64_t iptr_o3:1; + uint64_t iptr_o2:1; + uint64_t iptr_o1:1; + uint64_t iptr_o0:1; + uint64_t esr_sl3:2; + uint64_t nsr_sl3:1; + uint64_t ror_sl3:1; + uint64_t esr_sl2:2; + uint64_t nsr_sl2:1; + uint64_t ror_sl2:1; + uint64_t esr_sl1:2; + uint64_t nsr_sl1:1; + uint64_t ror_sl1:1; + uint64_t esr_sl0:2; + uint64_t nsr_sl0:1; + uint64_t ror_sl0:1; + } s; + struct cvmx_npi_output_control_cn30xx { + uint64_t reserved_45_63:19; + uint64_t p0_bmode:1; + uint64_t reserved_32_43:12; + uint64_t o0_es:2; + uint64_t o0_ns:1; + uint64_t o0_ro:1; + uint64_t reserved_25_27:3; + uint64_t o0_csrm:1; + uint64_t reserved_17_23:7; + uint64_t iptr_o0:1; + uint64_t reserved_4_15:12; + uint64_t esr_sl0:2; + uint64_t nsr_sl0:1; + uint64_t ror_sl0:1; + } cn30xx; + struct cvmx_npi_output_control_cn31xx { + uint64_t reserved_46_63:18; + uint64_t p1_bmode:1; + uint64_t p0_bmode:1; + uint64_t reserved_36_43:8; + uint64_t o1_es:2; + uint64_t o1_ns:1; + uint64_t o1_ro:1; + uint64_t o0_es:2; + uint64_t o0_ns:1; + uint64_t o0_ro:1; + uint64_t reserved_26_27:2; + uint64_t o1_csrm:1; + uint64_t o0_csrm:1; + uint64_t reserved_18_23:6; + uint64_t iptr_o1:1; + uint64_t iptr_o0:1; + uint64_t reserved_8_15:8; + uint64_t esr_sl1:2; + uint64_t nsr_sl1:1; + uint64_t ror_sl1:1; + uint64_t esr_sl0:2; + uint64_t nsr_sl0:1; + uint64_t ror_sl0:1; + } cn31xx; + struct cvmx_npi_output_control_s cn38xx; + struct cvmx_npi_output_control_cn38xxp2 { + uint64_t reserved_48_63:16; + uint64_t p3_bmode:1; + uint64_t p2_bmode:1; + uint64_t p1_bmode:1; + uint64_t p0_bmode:1; + uint64_t o3_es:2; + uint64_t o3_ns:1; + uint64_t o3_ro:1; + uint64_t o2_es:2; + uint64_t o2_ns:1; + uint64_t o2_ro:1; + uint64_t o1_es:2; + uint64_t o1_ns:1; + uint64_t o1_ro:1; + uint64_t o0_es:2; + uint64_t o0_ns:1; + uint64_t o0_ro:1; + uint64_t o3_csrm:1; + uint64_t o2_csrm:1; + uint64_t o1_csrm:1; + uint64_t o0_csrm:1; + uint64_t reserved_20_23:4; + uint64_t iptr_o3:1; + uint64_t iptr_o2:1; + uint64_t iptr_o1:1; + uint64_t iptr_o0:1; + uint64_t esr_sl3:2; + uint64_t nsr_sl3:1; + uint64_t ror_sl3:1; + uint64_t esr_sl2:2; + uint64_t nsr_sl2:1; + uint64_t ror_sl2:1; + uint64_t esr_sl1:2; + uint64_t nsr_sl1:1; + uint64_t ror_sl1:1; + uint64_t esr_sl0:2; + uint64_t nsr_sl0:1; + uint64_t ror_sl0:1; + } cn38xxp2; + struct cvmx_npi_output_control_cn50xx { + uint64_t reserved_49_63:15; + uint64_t pkt_rr:1; + uint64_t reserved_46_47:2; + uint64_t p1_bmode:1; + uint64_t p0_bmode:1; + uint64_t reserved_36_43:8; + uint64_t o1_es:2; + uint64_t o1_ns:1; + uint64_t o1_ro:1; + uint64_t o0_es:2; + uint64_t o0_ns:1; + uint64_t o0_ro:1; + uint64_t reserved_26_27:2; + uint64_t o1_csrm:1; + uint64_t o0_csrm:1; + uint64_t reserved_18_23:6; + uint64_t iptr_o1:1; + uint64_t iptr_o0:1; + uint64_t reserved_8_15:8; + uint64_t esr_sl1:2; + uint64_t nsr_sl1:1; + uint64_t ror_sl1:1; + uint64_t esr_sl0:2; + uint64_t nsr_sl0:1; + uint64_t ror_sl0:1; + } cn50xx; + struct cvmx_npi_output_control_s cn58xx; + struct cvmx_npi_output_control_s cn58xxp1; +}; + +union cvmx_npi_px_dbpair_addr { + uint64_t u64; + struct cvmx_npi_px_dbpair_addr_s { + uint64_t reserved_63_63:1; + uint64_t state:2; + uint64_t naddr:61; + } s; + struct cvmx_npi_px_dbpair_addr_s cn30xx; + struct cvmx_npi_px_dbpair_addr_s cn31xx; + struct cvmx_npi_px_dbpair_addr_s cn38xx; + struct cvmx_npi_px_dbpair_addr_s cn38xxp2; + struct cvmx_npi_px_dbpair_addr_s cn50xx; + struct cvmx_npi_px_dbpair_addr_s cn58xx; + struct cvmx_npi_px_dbpair_addr_s cn58xxp1; +}; + +union cvmx_npi_px_instr_addr { + uint64_t u64; + struct cvmx_npi_px_instr_addr_s { + uint64_t state:3; + uint64_t naddr:61; + } s; + struct cvmx_npi_px_instr_addr_s cn30xx; + struct cvmx_npi_px_instr_addr_s cn31xx; + struct cvmx_npi_px_instr_addr_s cn38xx; + struct cvmx_npi_px_instr_addr_s cn38xxp2; + struct cvmx_npi_px_instr_addr_s cn50xx; + struct cvmx_npi_px_instr_addr_s cn58xx; + struct cvmx_npi_px_instr_addr_s cn58xxp1; +}; + +union cvmx_npi_px_instr_cnts { + uint64_t u64; + struct cvmx_npi_px_instr_cnts_s { + uint64_t reserved_38_63:26; + uint64_t fcnt:6; + uint64_t avail:32; + } s; + struct cvmx_npi_px_instr_cnts_s cn30xx; + struct cvmx_npi_px_instr_cnts_s cn31xx; + struct cvmx_npi_px_instr_cnts_s cn38xx; + struct cvmx_npi_px_instr_cnts_s cn38xxp2; + struct cvmx_npi_px_instr_cnts_s cn50xx; + struct cvmx_npi_px_instr_cnts_s cn58xx; + struct cvmx_npi_px_instr_cnts_s cn58xxp1; +}; + +union cvmx_npi_px_pair_cnts { + uint64_t u64; + struct cvmx_npi_px_pair_cnts_s { + uint64_t reserved_37_63:27; + uint64_t fcnt:5; + uint64_t avail:32; + } s; + struct cvmx_npi_px_pair_cnts_s cn30xx; + struct cvmx_npi_px_pair_cnts_s cn31xx; + struct cvmx_npi_px_pair_cnts_s cn38xx; + struct cvmx_npi_px_pair_cnts_s cn38xxp2; + struct cvmx_npi_px_pair_cnts_s cn50xx; + struct cvmx_npi_px_pair_cnts_s cn58xx; + struct cvmx_npi_px_pair_cnts_s cn58xxp1; +}; + +union cvmx_npi_pci_burst_size { + uint64_t u64; + struct cvmx_npi_pci_burst_size_s { + uint64_t reserved_14_63:50; + uint64_t wr_brst:7; + uint64_t rd_brst:7; + } s; + struct cvmx_npi_pci_burst_size_s cn30xx; + struct cvmx_npi_pci_burst_size_s cn31xx; + struct cvmx_npi_pci_burst_size_s cn38xx; + struct cvmx_npi_pci_burst_size_s cn38xxp2; + struct cvmx_npi_pci_burst_size_s cn50xx; + struct cvmx_npi_pci_burst_size_s cn58xx; + struct cvmx_npi_pci_burst_size_s cn58xxp1; +}; + +union cvmx_npi_pci_int_arb_cfg { + uint64_t u64; + struct cvmx_npi_pci_int_arb_cfg_s { + uint64_t reserved_13_63:51; + uint64_t hostmode:1; + uint64_t pci_ovr:4; + uint64_t reserved_5_7:3; + uint64_t en:1; + uint64_t park_mod:1; + uint64_t park_dev:3; + } s; + struct cvmx_npi_pci_int_arb_cfg_cn30xx { + uint64_t reserved_5_63:59; + uint64_t en:1; + uint64_t park_mod:1; + uint64_t park_dev:3; + } cn30xx; + struct cvmx_npi_pci_int_arb_cfg_cn30xx cn31xx; + struct cvmx_npi_pci_int_arb_cfg_cn30xx cn38xx; + struct cvmx_npi_pci_int_arb_cfg_cn30xx cn38xxp2; + struct cvmx_npi_pci_int_arb_cfg_s cn50xx; + struct cvmx_npi_pci_int_arb_cfg_s cn58xx; + struct cvmx_npi_pci_int_arb_cfg_s cn58xxp1; +}; + +union cvmx_npi_pci_read_cmd { + uint64_t u64; + struct cvmx_npi_pci_read_cmd_s { + uint64_t reserved_11_63:53; + uint64_t cmd_size:11; + } s; + struct cvmx_npi_pci_read_cmd_s cn30xx; + struct cvmx_npi_pci_read_cmd_s cn31xx; + struct cvmx_npi_pci_read_cmd_s cn38xx; + struct cvmx_npi_pci_read_cmd_s cn38xxp2; + struct cvmx_npi_pci_read_cmd_s cn50xx; + struct cvmx_npi_pci_read_cmd_s cn58xx; + struct cvmx_npi_pci_read_cmd_s cn58xxp1; +}; + +union cvmx_npi_port32_instr_hdr { + uint64_t u64; + struct cvmx_npi_port32_instr_hdr_s { + uint64_t reserved_44_63:20; + uint64_t pbp:1; + uint64_t rsv_f:5; + uint64_t rparmode:2; + uint64_t rsv_e:1; + uint64_t rskp_len:7; + uint64_t rsv_d:6; + uint64_t use_ihdr:1; + uint64_t rsv_c:5; + uint64_t par_mode:2; + uint64_t rsv_b:1; + uint64_t skp_len:7; + uint64_t rsv_a:6; + } s; + struct cvmx_npi_port32_instr_hdr_s cn30xx; + struct cvmx_npi_port32_instr_hdr_s cn31xx; + struct cvmx_npi_port32_instr_hdr_s cn38xx; + struct cvmx_npi_port32_instr_hdr_s cn38xxp2; + struct cvmx_npi_port32_instr_hdr_s cn50xx; + struct cvmx_npi_port32_instr_hdr_s cn58xx; + struct cvmx_npi_port32_instr_hdr_s cn58xxp1; +}; + +union cvmx_npi_port33_instr_hdr { + uint64_t u64; + struct cvmx_npi_port33_instr_hdr_s { + uint64_t reserved_44_63:20; + uint64_t pbp:1; + uint64_t rsv_f:5; + uint64_t rparmode:2; + uint64_t rsv_e:1; + uint64_t rskp_len:7; + uint64_t rsv_d:6; + uint64_t use_ihdr:1; + uint64_t rsv_c:5; + uint64_t par_mode:2; + uint64_t rsv_b:1; + uint64_t skp_len:7; + uint64_t rsv_a:6; + } s; + struct cvmx_npi_port33_instr_hdr_s cn31xx; + struct cvmx_npi_port33_instr_hdr_s cn38xx; + struct cvmx_npi_port33_instr_hdr_s cn38xxp2; + struct cvmx_npi_port33_instr_hdr_s cn50xx; + struct cvmx_npi_port33_instr_hdr_s cn58xx; + struct cvmx_npi_port33_instr_hdr_s cn58xxp1; +}; + +union cvmx_npi_port34_instr_hdr { + uint64_t u64; + struct cvmx_npi_port34_instr_hdr_s { + uint64_t reserved_44_63:20; + uint64_t pbp:1; + uint64_t rsv_f:5; + uint64_t rparmode:2; + uint64_t rsv_e:1; + uint64_t rskp_len:7; + uint64_t rsv_d:6; + uint64_t use_ihdr:1; + uint64_t rsv_c:5; + uint64_t par_mode:2; + uint64_t rsv_b:1; + uint64_t skp_len:7; + uint64_t rsv_a:6; + } s; + struct cvmx_npi_port34_instr_hdr_s cn38xx; + struct cvmx_npi_port34_instr_hdr_s cn38xxp2; + struct cvmx_npi_port34_instr_hdr_s cn58xx; + struct cvmx_npi_port34_instr_hdr_s cn58xxp1; +}; + +union cvmx_npi_port35_instr_hdr { + uint64_t u64; + struct cvmx_npi_port35_instr_hdr_s { + uint64_t reserved_44_63:20; + uint64_t pbp:1; + uint64_t rsv_f:5; + uint64_t rparmode:2; + uint64_t rsv_e:1; + uint64_t rskp_len:7; + uint64_t rsv_d:6; + uint64_t use_ihdr:1; + uint64_t rsv_c:5; + uint64_t par_mode:2; + uint64_t rsv_b:1; + uint64_t skp_len:7; + uint64_t rsv_a:6; + } s; + struct cvmx_npi_port35_instr_hdr_s cn38xx; + struct cvmx_npi_port35_instr_hdr_s cn38xxp2; + struct cvmx_npi_port35_instr_hdr_s cn58xx; + struct cvmx_npi_port35_instr_hdr_s cn58xxp1; +}; + +union cvmx_npi_port_bp_control { + uint64_t u64; + struct cvmx_npi_port_bp_control_s { + uint64_t reserved_8_63:56; + uint64_t bp_on:4; + uint64_t enb:4; + } s; + struct cvmx_npi_port_bp_control_s cn30xx; + struct cvmx_npi_port_bp_control_s cn31xx; + struct cvmx_npi_port_bp_control_s cn38xx; + struct cvmx_npi_port_bp_control_s cn38xxp2; + struct cvmx_npi_port_bp_control_s cn50xx; + struct cvmx_npi_port_bp_control_s cn58xx; + struct cvmx_npi_port_bp_control_s cn58xxp1; +}; + +union cvmx_npi_rsl_int_blocks { + uint64_t u64; + struct cvmx_npi_rsl_int_blocks_s { + uint64_t reserved_32_63:32; + uint64_t rint_31:1; + uint64_t iob:1; + uint64_t reserved_28_29:2; + uint64_t rint_27:1; + uint64_t rint_26:1; + uint64_t rint_25:1; + uint64_t rint_24:1; + uint64_t asx1:1; + uint64_t asx0:1; + uint64_t rint_21:1; + uint64_t pip:1; + uint64_t spx1:1; + uint64_t spx0:1; + uint64_t lmc:1; + uint64_t l2c:1; + uint64_t rint_15:1; + uint64_t reserved_13_14:2; + uint64_t pow:1; + uint64_t tim:1; + uint64_t pko:1; + uint64_t ipd:1; + uint64_t rint_8:1; + uint64_t zip:1; + uint64_t dfa:1; + uint64_t fpa:1; + uint64_t key:1; + uint64_t npi:1; + uint64_t gmx1:1; + uint64_t gmx0:1; + uint64_t mio:1; + } s; + struct cvmx_npi_rsl_int_blocks_cn30xx { + uint64_t reserved_32_63:32; + uint64_t rint_31:1; + uint64_t iob:1; + uint64_t rint_29:1; + uint64_t rint_28:1; + uint64_t rint_27:1; + uint64_t rint_26:1; + uint64_t rint_25:1; + uint64_t rint_24:1; + uint64_t asx1:1; + uint64_t asx0:1; + uint64_t rint_21:1; + uint64_t pip:1; + uint64_t spx1:1; + uint64_t spx0:1; + uint64_t lmc:1; + uint64_t l2c:1; + uint64_t rint_15:1; + uint64_t rint_14:1; + uint64_t usb:1; + uint64_t pow:1; + uint64_t tim:1; + uint64_t pko:1; + uint64_t ipd:1; + uint64_t rint_8:1; + uint64_t zip:1; + uint64_t dfa:1; + uint64_t fpa:1; + uint64_t key:1; + uint64_t npi:1; + uint64_t gmx1:1; + uint64_t gmx0:1; + uint64_t mio:1; + } cn30xx; + struct cvmx_npi_rsl_int_blocks_cn30xx cn31xx; + struct cvmx_npi_rsl_int_blocks_cn38xx { + uint64_t reserved_32_63:32; + uint64_t rint_31:1; + uint64_t iob:1; + uint64_t rint_29:1; + uint64_t rint_28:1; + uint64_t rint_27:1; + uint64_t rint_26:1; + uint64_t rint_25:1; + uint64_t rint_24:1; + uint64_t asx1:1; + uint64_t asx0:1; + uint64_t rint_21:1; + uint64_t pip:1; + uint64_t spx1:1; + uint64_t spx0:1; + uint64_t lmc:1; + uint64_t l2c:1; + uint64_t rint_15:1; + uint64_t rint_14:1; + uint64_t rint_13:1; + uint64_t pow:1; + uint64_t tim:1; + uint64_t pko:1; + uint64_t ipd:1; + uint64_t rint_8:1; + uint64_t zip:1; + uint64_t dfa:1; + uint64_t fpa:1; + uint64_t key:1; + uint64_t npi:1; + uint64_t gmx1:1; + uint64_t gmx0:1; + uint64_t mio:1; + } cn38xx; + struct cvmx_npi_rsl_int_blocks_cn38xx cn38xxp2; + struct cvmx_npi_rsl_int_blocks_cn50xx { + uint64_t reserved_31_63:33; + uint64_t iob:1; + uint64_t lmc1:1; + uint64_t agl:1; + uint64_t reserved_24_27:4; + uint64_t asx1:1; + uint64_t asx0:1; + uint64_t reserved_21_21:1; + uint64_t pip:1; + uint64_t spx1:1; + uint64_t spx0:1; + uint64_t lmc:1; + uint64_t l2c:1; + uint64_t reserved_15_15:1; + uint64_t rad:1; + uint64_t usb:1; + uint64_t pow:1; + uint64_t tim:1; + uint64_t pko:1; + uint64_t ipd:1; + uint64_t reserved_8_8:1; + uint64_t zip:1; + uint64_t dfa:1; + uint64_t fpa:1; + uint64_t key:1; + uint64_t npi:1; + uint64_t gmx1:1; + uint64_t gmx0:1; + uint64_t mio:1; + } cn50xx; + struct cvmx_npi_rsl_int_blocks_cn38xx cn58xx; + struct cvmx_npi_rsl_int_blocks_cn38xx cn58xxp1; +}; + +union cvmx_npi_size_inputx { + uint64_t u64; + struct cvmx_npi_size_inputx_s { + uint64_t reserved_32_63:32; + uint64_t size:32; + } s; + struct cvmx_npi_size_inputx_s cn30xx; + struct cvmx_npi_size_inputx_s cn31xx; + struct cvmx_npi_size_inputx_s cn38xx; + struct cvmx_npi_size_inputx_s cn38xxp2; + struct cvmx_npi_size_inputx_s cn50xx; + struct cvmx_npi_size_inputx_s cn58xx; + struct cvmx_npi_size_inputx_s cn58xxp1; +}; + +union cvmx_npi_win_read_to { + uint64_t u64; + struct cvmx_npi_win_read_to_s { + uint64_t reserved_32_63:32; + uint64_t time:32; + } s; + struct cvmx_npi_win_read_to_s cn30xx; + struct cvmx_npi_win_read_to_s cn31xx; + struct cvmx_npi_win_read_to_s cn38xx; + struct cvmx_npi_win_read_to_s cn38xxp2; + struct cvmx_npi_win_read_to_s cn50xx; + struct cvmx_npi_win_read_to_s cn58xx; + struct cvmx_npi_win_read_to_s cn58xxp1; +}; + +#endif diff --git a/arch/mips/include/asm/octeon/cvmx-pci-defs.h b/arch/mips/include/asm/octeon/cvmx-pci-defs.h new file mode 100644 index 0000000..90f8d65 --- /dev/null +++ b/arch/mips/include/asm/octeon/cvmx-pci-defs.h @@ -0,0 +1,1645 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +#ifndef __CVMX_PCI_DEFS_H__ +#define __CVMX_PCI_DEFS_H__ + +#define CVMX_PCI_BAR1_INDEXX(offset) \ + (0x0000000000000100ull + (((offset) & 31) * 4)) +#define CVMX_PCI_BIST_REG \ + (0x00000000000001C0ull) +#define CVMX_PCI_CFG00 \ + (0x0000000000000000ull) +#define CVMX_PCI_CFG01 \ + (0x0000000000000004ull) +#define CVMX_PCI_CFG02 \ + (0x0000000000000008ull) +#define CVMX_PCI_CFG03 \ + (0x000000000000000Cull) +#define CVMX_PCI_CFG04 \ + (0x0000000000000010ull) +#define CVMX_PCI_CFG05 \ + (0x0000000000000014ull) +#define CVMX_PCI_CFG06 \ + (0x0000000000000018ull) +#define CVMX_PCI_CFG07 \ + (0x000000000000001Cull) +#define CVMX_PCI_CFG08 \ + (0x0000000000000020ull) +#define CVMX_PCI_CFG09 \ + (0x0000000000000024ull) +#define CVMX_PCI_CFG10 \ + (0x0000000000000028ull) +#define CVMX_PCI_CFG11 \ + (0x000000000000002Cull) +#define CVMX_PCI_CFG12 \ + (0x0000000000000030ull) +#define CVMX_PCI_CFG13 \ + (0x0000000000000034ull) +#define CVMX_PCI_CFG15 \ + (0x000000000000003Cull) +#define CVMX_PCI_CFG16 \ + (0x0000000000000040ull) +#define CVMX_PCI_CFG17 \ + (0x0000000000000044ull) +#define CVMX_PCI_CFG18 \ + (0x0000000000000048ull) +#define CVMX_PCI_CFG19 \ + (0x000000000000004Cull) +#define CVMX_PCI_CFG20 \ + (0x0000000000000050ull) +#define CVMX_PCI_CFG21 \ + (0x0000000000000054ull) +#define CVMX_PCI_CFG22 \ + (0x0000000000000058ull) +#define CVMX_PCI_CFG56 \ + (0x00000000000000E0ull) +#define CVMX_PCI_CFG57 \ + (0x00000000000000E4ull) +#define CVMX_PCI_CFG58 \ + (0x00000000000000E8ull) +#define CVMX_PCI_CFG59 \ + (0x00000000000000ECull) +#define CVMX_PCI_CFG60 \ + (0x00000000000000F0ull) +#define CVMX_PCI_CFG61 \ + (0x00000000000000F4ull) +#define CVMX_PCI_CFG62 \ + (0x00000000000000F8ull) +#define CVMX_PCI_CFG63 \ + (0x00000000000000FCull) +#define CVMX_PCI_CNT_REG \ + (0x00000000000001B8ull) +#define CVMX_PCI_CTL_STATUS_2 \ + (0x000000000000018Cull) +#define CVMX_PCI_DBELL_0 \ + (0x0000000000000080ull) +#define CVMX_PCI_DBELL_1 \ + (0x0000000000000088ull) +#define CVMX_PCI_DBELL_2 \ + (0x0000000000000090ull) +#define CVMX_PCI_DBELL_3 \ + (0x0000000000000098ull) +#define CVMX_PCI_DBELL_X(offset) \ + (0x0000000000000080ull + (((offset) & 3) * 8)) +#define CVMX_PCI_DMA_CNT0 \ + (0x00000000000000A0ull) +#define CVMX_PCI_DMA_CNT1 \ + (0x00000000000000A8ull) +#define CVMX_PCI_DMA_CNTX(offset) \ + (0x00000000000000A0ull + (((offset) & 1) * 8)) +#define CVMX_PCI_DMA_INT_LEV0 \ + (0x00000000000000A4ull) +#define CVMX_PCI_DMA_INT_LEV1 \ + (0x00000000000000ACull) +#define CVMX_PCI_DMA_INT_LEVX(offset) \ + (0x00000000000000A4ull + (((offset) & 1) * 8)) +#define CVMX_PCI_DMA_TIME0 \ + (0x00000000000000B0ull) +#define CVMX_PCI_DMA_TIME1 \ + (0x00000000000000B4ull) +#define CVMX_PCI_DMA_TIMEX(offset) \ + (0x00000000000000B0ull + (((offset) & 1) * 4)) +#define CVMX_PCI_INSTR_COUNT0 \ + (0x0000000000000084ull) +#define CVMX_PCI_INSTR_COUNT1 \ + (0x000000000000008Cull) +#define CVMX_PCI_INSTR_COUNT2 \ + (0x0000000000000094ull) +#define CVMX_PCI_INSTR_COUNT3 \ + (0x000000000000009Cull) +#define CVMX_PCI_INSTR_COUNTX(offset) \ + (0x0000000000000084ull + (((offset) & 3) * 8)) +#define CVMX_PCI_INT_ENB \ + (0x0000000000000038ull) +#define CVMX_PCI_INT_ENB2 \ + (0x00000000000001A0ull) +#define CVMX_PCI_INT_SUM \ + (0x0000000000000030ull) +#define CVMX_PCI_INT_SUM2 \ + (0x0000000000000198ull) +#define CVMX_PCI_MSI_RCV \ + (0x00000000000000F0ull) +#define CVMX_PCI_PKTS_SENT0 \ + (0x0000000000000040ull) +#define CVMX_PCI_PKTS_SENT1 \ + (0x0000000000000050ull) +#define CVMX_PCI_PKTS_SENT2 \ + (0x0000000000000060ull) +#define CVMX_PCI_PKTS_SENT3 \ + (0x0000000000000070ull) +#define CVMX_PCI_PKTS_SENTX(offset) \ + (0x0000000000000040ull + (((offset) & 3) * 16)) +#define CVMX_PCI_PKTS_SENT_INT_LEV0 \ + (0x0000000000000048ull) +#define CVMX_PCI_PKTS_SENT_INT_LEV1 \ + (0x0000000000000058ull) +#define CVMX_PCI_PKTS_SENT_INT_LEV2 \ + (0x0000000000000068ull) +#define CVMX_PCI_PKTS_SENT_INT_LEV3 \ + (0x0000000000000078ull) +#define CVMX_PCI_PKTS_SENT_INT_LEVX(offset) \ + (0x0000000000000048ull + (((offset) & 3) * 16)) +#define CVMX_PCI_PKTS_SENT_TIME0 \ + (0x000000000000004Cull) +#define CVMX_PCI_PKTS_SENT_TIME1 \ + (0x000000000000005Cull) +#define CVMX_PCI_PKTS_SENT_TIME2 \ + (0x000000000000006Cull) +#define CVMX_PCI_PKTS_SENT_TIME3 \ + (0x000000000000007Cull) +#define CVMX_PCI_PKTS_SENT_TIMEX(offset) \ + (0x000000000000004Cull + (((offset) & 3) * 16)) +#define CVMX_PCI_PKT_CREDITS0 \ + (0x0000000000000044ull) +#define CVMX_PCI_PKT_CREDITS1 \ + (0x0000000000000054ull) +#define CVMX_PCI_PKT_CREDITS2 \ + (0x0000000000000064ull) +#define CVMX_PCI_PKT_CREDITS3 \ + (0x0000000000000074ull) +#define CVMX_PCI_PKT_CREDITSX(offset) \ + (0x0000000000000044ull + (((offset) & 3) * 16)) +#define CVMX_PCI_READ_CMD_6 \ + (0x0000000000000180ull) +#define CVMX_PCI_READ_CMD_C \ + (0x0000000000000184ull) +#define CVMX_PCI_READ_CMD_E \ + (0x0000000000000188ull) +#define CVMX_PCI_READ_TIMEOUT \ + CVMX_ADD_IO_SEG(0x00011F00000000B0ull) +#define CVMX_PCI_SCM_REG \ + (0x00000000000001A8ull) +#define CVMX_PCI_TSR_REG \ + (0x00000000000001B0ull) +#define CVMX_PCI_WIN_RD_ADDR \ + (0x0000000000000008ull) +#define CVMX_PCI_WIN_RD_DATA \ + (0x0000000000000020ull) +#define CVMX_PCI_WIN_WR_ADDR \ + (0x0000000000000000ull) +#define CVMX_PCI_WIN_WR_DATA \ + (0x0000000000000010ull) +#define CVMX_PCI_WIN_WR_MASK \ + (0x0000000000000018ull) + +union cvmx_pci_bar1_indexx { + uint32_t u32; + struct cvmx_pci_bar1_indexx_s { + uint32_t reserved_18_31:14; + uint32_t addr_idx:14; + uint32_t ca:1; + uint32_t end_swp:2; + uint32_t addr_v:1; + } s; + struct cvmx_pci_bar1_indexx_s cn30xx; + struct cvmx_pci_bar1_indexx_s cn31xx; + struct cvmx_pci_bar1_indexx_s cn38xx; + struct cvmx_pci_bar1_indexx_s cn38xxp2; + struct cvmx_pci_bar1_indexx_s cn50xx; + struct cvmx_pci_bar1_indexx_s cn58xx; + struct cvmx_pci_bar1_indexx_s cn58xxp1; +}; + +union cvmx_pci_bist_reg { + uint64_t u64; + struct cvmx_pci_bist_reg_s { + uint64_t reserved_10_63:54; + uint64_t rsp_bs:1; + uint64_t dma0_bs:1; + uint64_t cmd0_bs:1; + uint64_t cmd_bs:1; + uint64_t csr2p_bs:1; + uint64_t csrr_bs:1; + uint64_t rsp2p_bs:1; + uint64_t csr2n_bs:1; + uint64_t dat2n_bs:1; + uint64_t dbg2n_bs:1; + } s; + struct cvmx_pci_bist_reg_s cn50xx; +}; + +union cvmx_pci_cfg00 { + uint32_t u32; + struct cvmx_pci_cfg00_s { + uint32_t devid:16; + uint32_t vendid:16; + } s; + struct cvmx_pci_cfg00_s cn30xx; + struct cvmx_pci_cfg00_s cn31xx; + struct cvmx_pci_cfg00_s cn38xx; + struct cvmx_pci_cfg00_s cn38xxp2; + struct cvmx_pci_cfg00_s cn50xx; + struct cvmx_pci_cfg00_s cn58xx; + struct cvmx_pci_cfg00_s cn58xxp1; +}; + +union cvmx_pci_cfg01 { + uint32_t u32; + struct cvmx_pci_cfg01_s { + uint32_t dpe:1; + uint32_t sse:1; + uint32_t rma:1; + uint32_t rta:1; + uint32_t sta:1; + uint32_t devt:2; + uint32_t mdpe:1; + uint32_t fbb:1; + uint32_t reserved_22_22:1; + uint32_t m66:1; + uint32_t cle:1; + uint32_t i_stat:1; + uint32_t reserved_11_18:8; + uint32_t i_dis:1; + uint32_t fbbe:1; + uint32_t see:1; + uint32_t ads:1; + uint32_t pee:1; + uint32_t vps:1; + uint32_t mwice:1; + uint32_t scse:1; + uint32_t me:1; + uint32_t msae:1; + uint32_t isae:1; + } s; + struct cvmx_pci_cfg01_s cn30xx; + struct cvmx_pci_cfg01_s cn31xx; + struct cvmx_pci_cfg01_s cn38xx; + struct cvmx_pci_cfg01_s cn38xxp2; + struct cvmx_pci_cfg01_s cn50xx; + struct cvmx_pci_cfg01_s cn58xx; + struct cvmx_pci_cfg01_s cn58xxp1; +}; + +union cvmx_pci_cfg02 { + uint32_t u32; + struct cvmx_pci_cfg02_s { + uint32_t cc:24; + uint32_t rid:8; + } s; + struct cvmx_pci_cfg02_s cn30xx; + struct cvmx_pci_cfg02_s cn31xx; + struct cvmx_pci_cfg02_s cn38xx; + struct cvmx_pci_cfg02_s cn38xxp2; + struct cvmx_pci_cfg02_s cn50xx; + struct cvmx_pci_cfg02_s cn58xx; + struct cvmx_pci_cfg02_s cn58xxp1; +}; + +union cvmx_pci_cfg03 { + uint32_t u32; + struct cvmx_pci_cfg03_s { + uint32_t bcap:1; + uint32_t brb:1; + uint32_t reserved_28_29:2; + uint32_t bcod:4; + uint32_t ht:8; + uint32_t lt:8; + uint32_t cls:8; + } s; + struct cvmx_pci_cfg03_s cn30xx; + struct cvmx_pci_cfg03_s cn31xx; + struct cvmx_pci_cfg03_s cn38xx; + struct cvmx_pci_cfg03_s cn38xxp2; + struct cvmx_pci_cfg03_s cn50xx; + struct cvmx_pci_cfg03_s cn58xx; + struct cvmx_pci_cfg03_s cn58xxp1; +}; + +union cvmx_pci_cfg04 { + uint32_t u32; + struct cvmx_pci_cfg04_s { + uint32_t lbase:20; + uint32_t lbasez:8; + uint32_t pf:1; + uint32_t typ:2; + uint32_t mspc:1; + } s; + struct cvmx_pci_cfg04_s cn30xx; + struct cvmx_pci_cfg04_s cn31xx; + struct cvmx_pci_cfg04_s cn38xx; + struct cvmx_pci_cfg04_s cn38xxp2; + struct cvmx_pci_cfg04_s cn50xx; + struct cvmx_pci_cfg04_s cn58xx; + struct cvmx_pci_cfg04_s cn58xxp1; +}; + +union cvmx_pci_cfg05 { + uint32_t u32; + struct cvmx_pci_cfg05_s { + uint32_t hbase:32; + } s; + struct cvmx_pci_cfg05_s cn30xx; + struct cvmx_pci_cfg05_s cn31xx; + struct cvmx_pci_cfg05_s cn38xx; + struct cvmx_pci_cfg05_s cn38xxp2; + struct cvmx_pci_cfg05_s cn50xx; + struct cvmx_pci_cfg05_s cn58xx; + struct cvmx_pci_cfg05_s cn58xxp1; +}; + +union cvmx_pci_cfg06 { + uint32_t u32; + struct cvmx_pci_cfg06_s { + uint32_t lbase:5; + uint32_t lbasez:23; + uint32_t pf:1; + uint32_t typ:2; + uint32_t mspc:1; + } s; + struct cvmx_pci_cfg06_s cn30xx; + struct cvmx_pci_cfg06_s cn31xx; + struct cvmx_pci_cfg06_s cn38xx; + struct cvmx_pci_cfg06_s cn38xxp2; + struct cvmx_pci_cfg06_s cn50xx; + struct cvmx_pci_cfg06_s cn58xx; + struct cvmx_pci_cfg06_s cn58xxp1; +}; + +union cvmx_pci_cfg07 { + uint32_t u32; + struct cvmx_pci_cfg07_s { + uint32_t hbase:32; + } s; + struct cvmx_pci_cfg07_s cn30xx; + struct cvmx_pci_cfg07_s cn31xx; + struct cvmx_pci_cfg07_s cn38xx; + struct cvmx_pci_cfg07_s cn38xxp2; + struct cvmx_pci_cfg07_s cn50xx; + struct cvmx_pci_cfg07_s cn58xx; + struct cvmx_pci_cfg07_s cn58xxp1; +}; + +union cvmx_pci_cfg08 { + uint32_t u32; + struct cvmx_pci_cfg08_s { + uint32_t lbasez:28; + uint32_t pf:1; + uint32_t typ:2; + uint32_t mspc:1; + } s; + struct cvmx_pci_cfg08_s cn30xx; + struct cvmx_pci_cfg08_s cn31xx; + struct cvmx_pci_cfg08_s cn38xx; + struct cvmx_pci_cfg08_s cn38xxp2; + struct cvmx_pci_cfg08_s cn50xx; + struct cvmx_pci_cfg08_s cn58xx; + struct cvmx_pci_cfg08_s cn58xxp1; +}; + +union cvmx_pci_cfg09 { + uint32_t u32; + struct cvmx_pci_cfg09_s { + uint32_t hbase:25; + uint32_t hbasez:7; + } s; + struct cvmx_pci_cfg09_s cn30xx; + struct cvmx_pci_cfg09_s cn31xx; + struct cvmx_pci_cfg09_s cn38xx; + struct cvmx_pci_cfg09_s cn38xxp2; + struct cvmx_pci_cfg09_s cn50xx; + struct cvmx_pci_cfg09_s cn58xx; + struct cvmx_pci_cfg09_s cn58xxp1; +}; + +union cvmx_pci_cfg10 { + uint32_t u32; + struct cvmx_pci_cfg10_s { + uint32_t cisp:32; + } s; + struct cvmx_pci_cfg10_s cn30xx; + struct cvmx_pci_cfg10_s cn31xx; + struct cvmx_pci_cfg10_s cn38xx; + struct cvmx_pci_cfg10_s cn38xxp2; + struct cvmx_pci_cfg10_s cn50xx; + struct cvmx_pci_cfg10_s cn58xx; + struct cvmx_pci_cfg10_s cn58xxp1; +}; + +union cvmx_pci_cfg11 { + uint32_t u32; + struct cvmx_pci_cfg11_s { + uint32_t ssid:16; + uint32_t ssvid:16; + } s; + struct cvmx_pci_cfg11_s cn30xx; + struct cvmx_pci_cfg11_s cn31xx; + struct cvmx_pci_cfg11_s cn38xx; + struct cvmx_pci_cfg11_s cn38xxp2; + struct cvmx_pci_cfg11_s cn50xx; + struct cvmx_pci_cfg11_s cn58xx; + struct cvmx_pci_cfg11_s cn58xxp1; +}; + +union cvmx_pci_cfg12 { + uint32_t u32; + struct cvmx_pci_cfg12_s { + uint32_t erbar:16; + uint32_t erbarz:5; + uint32_t reserved_1_10:10; + uint32_t erbar_en:1; + } s; + struct cvmx_pci_cfg12_s cn30xx; + struct cvmx_pci_cfg12_s cn31xx; + struct cvmx_pci_cfg12_s cn38xx; + struct cvmx_pci_cfg12_s cn38xxp2; + struct cvmx_pci_cfg12_s cn50xx; + struct cvmx_pci_cfg12_s cn58xx; + struct cvmx_pci_cfg12_s cn58xxp1; +}; + +union cvmx_pci_cfg13 { + uint32_t u32; + struct cvmx_pci_cfg13_s { + uint32_t reserved_8_31:24; + uint32_t cp:8; + } s; + struct cvmx_pci_cfg13_s cn30xx; + struct cvmx_pci_cfg13_s cn31xx; + struct cvmx_pci_cfg13_s cn38xx; + struct cvmx_pci_cfg13_s cn38xxp2; + struct cvmx_pci_cfg13_s cn50xx; + struct cvmx_pci_cfg13_s cn58xx; + struct cvmx_pci_cfg13_s cn58xxp1; +}; + +union cvmx_pci_cfg15 { + uint32_t u32; + struct cvmx_pci_cfg15_s { + uint32_t ml:8; + uint32_t mg:8; + uint32_t inta:8; + uint32_t il:8; + } s; + struct cvmx_pci_cfg15_s cn30xx; + struct cvmx_pci_cfg15_s cn31xx; + struct cvmx_pci_cfg15_s cn38xx; + struct cvmx_pci_cfg15_s cn38xxp2; + struct cvmx_pci_cfg15_s cn50xx; + struct cvmx_pci_cfg15_s cn58xx; + struct cvmx_pci_cfg15_s cn58xxp1; +}; + +union cvmx_pci_cfg16 { + uint32_t u32; + struct cvmx_pci_cfg16_s { + uint32_t trdnpr:1; + uint32_t trdard:1; + uint32_t rdsati:1; + uint32_t trdrs:1; + uint32_t trtae:1; + uint32_t twsei:1; + uint32_t twsen:1; + uint32_t twtae:1; + uint32_t tmae:1; + uint32_t tslte:3; + uint32_t tilt:4; + uint32_t pbe:12; + uint32_t dppmr:1; + uint32_t reserved_2_2:1; + uint32_t tswc:1; + uint32_t mltd:1; + } s; + struct cvmx_pci_cfg16_s cn30xx; + struct cvmx_pci_cfg16_s cn31xx; + struct cvmx_pci_cfg16_s cn38xx; + struct cvmx_pci_cfg16_s cn38xxp2; + struct cvmx_pci_cfg16_s cn50xx; + struct cvmx_pci_cfg16_s cn58xx; + struct cvmx_pci_cfg16_s cn58xxp1; +}; + +union cvmx_pci_cfg17 { + uint32_t u32; + struct cvmx_pci_cfg17_s { + uint32_t tscme:32; + } s; + struct cvmx_pci_cfg17_s cn30xx; + struct cvmx_pci_cfg17_s cn31xx; + struct cvmx_pci_cfg17_s cn38xx; + struct cvmx_pci_cfg17_s cn38xxp2; + struct cvmx_pci_cfg17_s cn50xx; + struct cvmx_pci_cfg17_s cn58xx; + struct cvmx_pci_cfg17_s cn58xxp1; +}; + +union cvmx_pci_cfg18 { + uint32_t u32; + struct cvmx_pci_cfg18_s { + uint32_t tdsrps:32; + } s; + struct cvmx_pci_cfg18_s cn30xx; + struct cvmx_pci_cfg18_s cn31xx; + struct cvmx_pci_cfg18_s cn38xx; + struct cvmx_pci_cfg18_s cn38xxp2; + struct cvmx_pci_cfg18_s cn50xx; + struct cvmx_pci_cfg18_s cn58xx; + struct cvmx_pci_cfg18_s cn58xxp1; +}; + +union cvmx_pci_cfg19 { + uint32_t u32; + struct cvmx_pci_cfg19_s { + uint32_t mrbcm:1; + uint32_t mrbci:1; + uint32_t mdwe:1; + uint32_t mdre:1; + uint32_t mdrimc:1; + uint32_t mdrrmc:3; + uint32_t tmes:8; + uint32_t teci:1; + uint32_t tmei:1; + uint32_t tmse:1; + uint32_t tmdpes:1; + uint32_t tmapes:1; + uint32_t reserved_9_10:2; + uint32_t tibcd:1; + uint32_t tibde:1; + uint32_t reserved_6_6:1; + uint32_t tidomc:1; + uint32_t tdomc:5; + } s; + struct cvmx_pci_cfg19_s cn30xx; + struct cvmx_pci_cfg19_s cn31xx; + struct cvmx_pci_cfg19_s cn38xx; + struct cvmx_pci_cfg19_s cn38xxp2; + struct cvmx_pci_cfg19_s cn50xx; + struct cvmx_pci_cfg19_s cn58xx; + struct cvmx_pci_cfg19_s cn58xxp1; +}; + +union cvmx_pci_cfg20 { + uint32_t u32; + struct cvmx_pci_cfg20_s { + uint32_t mdsp:32; + } s; + struct cvmx_pci_cfg20_s cn30xx; + struct cvmx_pci_cfg20_s cn31xx; + struct cvmx_pci_cfg20_s cn38xx; + struct cvmx_pci_cfg20_s cn38xxp2; + struct cvmx_pci_cfg20_s cn50xx; + struct cvmx_pci_cfg20_s cn58xx; + struct cvmx_pci_cfg20_s cn58xxp1; +}; + +union cvmx_pci_cfg21 { + uint32_t u32; + struct cvmx_pci_cfg21_s { + uint32_t scmre:32; + } s; + struct cvmx_pci_cfg21_s cn30xx; + struct cvmx_pci_cfg21_s cn31xx; + struct cvmx_pci_cfg21_s cn38xx; + struct cvmx_pci_cfg21_s cn38xxp2; + struct cvmx_pci_cfg21_s cn50xx; + struct cvmx_pci_cfg21_s cn58xx; + struct cvmx_pci_cfg21_s cn58xxp1; +}; + +union cvmx_pci_cfg22 { + uint32_t u32; + struct cvmx_pci_cfg22_s { + uint32_t mac:7; + uint32_t reserved_19_24:6; + uint32_t flush:1; + uint32_t mra:1; + uint32_t mtta:1; + uint32_t mrv:8; + uint32_t mttv:8; + } s; + struct cvmx_pci_cfg22_s cn30xx; + struct cvmx_pci_cfg22_s cn31xx; + struct cvmx_pci_cfg22_s cn38xx; + struct cvmx_pci_cfg22_s cn38xxp2; + struct cvmx_pci_cfg22_s cn50xx; + struct cvmx_pci_cfg22_s cn58xx; + struct cvmx_pci_cfg22_s cn58xxp1; +}; + +union cvmx_pci_cfg56 { + uint32_t u32; + struct cvmx_pci_cfg56_s { + uint32_t reserved_23_31:9; + uint32_t most:3; + uint32_t mmbc:2; + uint32_t roe:1; + uint32_t dpere:1; + uint32_t ncp:8; + uint32_t pxcid:8; + } s; + struct cvmx_pci_cfg56_s cn30xx; + struct cvmx_pci_cfg56_s cn31xx; + struct cvmx_pci_cfg56_s cn38xx; + struct cvmx_pci_cfg56_s cn38xxp2; + struct cvmx_pci_cfg56_s cn50xx; + struct cvmx_pci_cfg56_s cn58xx; + struct cvmx_pci_cfg56_s cn58xxp1; +}; + +union cvmx_pci_cfg57 { + uint32_t u32; + struct cvmx_pci_cfg57_s { + uint32_t reserved_30_31:2; + uint32_t scemr:1; + uint32_t mcrsd:3; + uint32_t mostd:3; + uint32_t mmrbcd:2; + uint32_t dc:1; + uint32_t usc:1; + uint32_t scd:1; + uint32_t m133:1; + uint32_t w64:1; + uint32_t bn:8; + uint32_t dn:5; + uint32_t fn:3; + } s; + struct cvmx_pci_cfg57_s cn30xx; + struct cvmx_pci_cfg57_s cn31xx; + struct cvmx_pci_cfg57_s cn38xx; + struct cvmx_pci_cfg57_s cn38xxp2; + struct cvmx_pci_cfg57_s cn50xx; + struct cvmx_pci_cfg57_s cn58xx; + struct cvmx_pci_cfg57_s cn58xxp1; +}; + +union cvmx_pci_cfg58 { + uint32_t u32; + struct cvmx_pci_cfg58_s { + uint32_t pmes:5; + uint32_t d2s:1; + uint32_t d1s:1; + uint32_t auxc:3; + uint32_t dsi:1; + uint32_t reserved_20_20:1; + uint32_t pmec:1; + uint32_t pcimiv:3; + uint32_t ncp:8; + uint32_t pmcid:8; + } s; + struct cvmx_pci_cfg58_s cn30xx; + struct cvmx_pci_cfg58_s cn31xx; + struct cvmx_pci_cfg58_s cn38xx; + struct cvmx_pci_cfg58_s cn38xxp2; + struct cvmx_pci_cfg58_s cn50xx; + struct cvmx_pci_cfg58_s cn58xx; + struct cvmx_pci_cfg58_s cn58xxp1; +}; + +union cvmx_pci_cfg59 { + uint32_t u32; + struct cvmx_pci_cfg59_s { + uint32_t pmdia:8; + uint32_t bpccen:1; + uint32_t bd3h:1; + uint32_t reserved_16_21:6; + uint32_t pmess:1; + uint32_t pmedsia:2; + uint32_t pmds:4; + uint32_t pmeens:1; + uint32_t reserved_2_7:6; + uint32_t ps:2; + } s; + struct cvmx_pci_cfg59_s cn30xx; + struct cvmx_pci_cfg59_s cn31xx; + struct cvmx_pci_cfg59_s cn38xx; + struct cvmx_pci_cfg59_s cn38xxp2; + struct cvmx_pci_cfg59_s cn50xx; + struct cvmx_pci_cfg59_s cn58xx; + struct cvmx_pci_cfg59_s cn58xxp1; +}; + +union cvmx_pci_cfg60 { + uint32_t u32; + struct cvmx_pci_cfg60_s { + uint32_t reserved_24_31:8; + uint32_t m64:1; + uint32_t mme:3; + uint32_t mmc:3; + uint32_t msien:1; + uint32_t ncp:8; + uint32_t msicid:8; + } s; + struct cvmx_pci_cfg60_s cn30xx; + struct cvmx_pci_cfg60_s cn31xx; + struct cvmx_pci_cfg60_s cn38xx; + struct cvmx_pci_cfg60_s cn38xxp2; + struct cvmx_pci_cfg60_s cn50xx; + struct cvmx_pci_cfg60_s cn58xx; + struct cvmx_pci_cfg60_s cn58xxp1; +}; + +union cvmx_pci_cfg61 { + uint32_t u32; + struct cvmx_pci_cfg61_s { + uint32_t msi31t2:30; + uint32_t reserved_0_1:2; + } s; + struct cvmx_pci_cfg61_s cn30xx; + struct cvmx_pci_cfg61_s cn31xx; + struct cvmx_pci_cfg61_s cn38xx; + struct cvmx_pci_cfg61_s cn38xxp2; + struct cvmx_pci_cfg61_s cn50xx; + struct cvmx_pci_cfg61_s cn58xx; + struct cvmx_pci_cfg61_s cn58xxp1; +}; + +union cvmx_pci_cfg62 { + uint32_t u32; + struct cvmx_pci_cfg62_s { + uint32_t msi:32; + } s; + struct cvmx_pci_cfg62_s cn30xx; + struct cvmx_pci_cfg62_s cn31xx; + struct cvmx_pci_cfg62_s cn38xx; + struct cvmx_pci_cfg62_s cn38xxp2; + struct cvmx_pci_cfg62_s cn50xx; + struct cvmx_pci_cfg62_s cn58xx; + struct cvmx_pci_cfg62_s cn58xxp1; +}; + +union cvmx_pci_cfg63 { + uint32_t u32; + struct cvmx_pci_cfg63_s { + uint32_t reserved_16_31:16; + uint32_t msimd:16; + } s; + struct cvmx_pci_cfg63_s cn30xx; + struct cvmx_pci_cfg63_s cn31xx; + struct cvmx_pci_cfg63_s cn38xx; + struct cvmx_pci_cfg63_s cn38xxp2; + struct cvmx_pci_cfg63_s cn50xx; + struct cvmx_pci_cfg63_s cn58xx; + struct cvmx_pci_cfg63_s cn58xxp1; +}; + +union cvmx_pci_cnt_reg { + uint64_t u64; + struct cvmx_pci_cnt_reg_s { + uint64_t reserved_38_63:26; + uint64_t hm_pcix:1; + uint64_t hm_speed:2; + uint64_t ap_pcix:1; + uint64_t ap_speed:2; + uint64_t pcicnt:32; + } s; + struct cvmx_pci_cnt_reg_s cn50xx; + struct cvmx_pci_cnt_reg_s cn58xx; + struct cvmx_pci_cnt_reg_s cn58xxp1; +}; + +union cvmx_pci_ctl_status_2 { + uint32_t u32; + struct cvmx_pci_ctl_status_2_s { + uint32_t reserved_29_31:3; + uint32_t bb1_hole:3; + uint32_t bb1_siz:1; + uint32_t bb_ca:1; + uint32_t bb_es:2; + uint32_t bb1:1; + uint32_t bb0:1; + uint32_t erst_n:1; + uint32_t bar2pres:1; + uint32_t scmtyp:1; + uint32_t scm:1; + uint32_t en_wfilt:1; + uint32_t reserved_14_14:1; + uint32_t ap_pcix:1; + uint32_t ap_64ad:1; + uint32_t b12_bist:1; + uint32_t pmo_amod:1; + uint32_t pmo_fpc:3; + uint32_t tsr_hwm:3; + uint32_t bar2_enb:1; + uint32_t bar2_esx:2; + uint32_t bar2_cax:1; + } s; + struct cvmx_pci_ctl_status_2_s cn30xx; + struct cvmx_pci_ctl_status_2_cn31xx { + uint32_t reserved_20_31:12; + uint32_t erst_n:1; + uint32_t bar2pres:1; + uint32_t scmtyp:1; + uint32_t scm:1; + uint32_t en_wfilt:1; + uint32_t reserved_14_14:1; + uint32_t ap_pcix:1; + uint32_t ap_64ad:1; + uint32_t b12_bist:1; + uint32_t pmo_amod:1; + uint32_t pmo_fpc:3; + uint32_t tsr_hwm:3; + uint32_t bar2_enb:1; + uint32_t bar2_esx:2; + uint32_t bar2_cax:1; + } cn31xx; + struct cvmx_pci_ctl_status_2_s cn38xx; + struct cvmx_pci_ctl_status_2_cn31xx cn38xxp2; + struct cvmx_pci_ctl_status_2_s cn50xx; + struct cvmx_pci_ctl_status_2_s cn58xx; + struct cvmx_pci_ctl_status_2_s cn58xxp1; +}; + +union cvmx_pci_dbellx { + uint32_t u32; + struct cvmx_pci_dbellx_s { + uint32_t reserved_16_31:16; + uint32_t inc_val:16; + } s; + struct cvmx_pci_dbellx_s cn30xx; + struct cvmx_pci_dbellx_s cn31xx; + struct cvmx_pci_dbellx_s cn38xx; + struct cvmx_pci_dbellx_s cn38xxp2; + struct cvmx_pci_dbellx_s cn50xx; + struct cvmx_pci_dbellx_s cn58xx; + struct cvmx_pci_dbellx_s cn58xxp1; +}; + +union cvmx_pci_dma_cntx { + uint32_t u32; + struct cvmx_pci_dma_cntx_s { + uint32_t dma_cnt:32; + } s; + struct cvmx_pci_dma_cntx_s cn30xx; + struct cvmx_pci_dma_cntx_s cn31xx; + struct cvmx_pci_dma_cntx_s cn38xx; + struct cvmx_pci_dma_cntx_s cn38xxp2; + struct cvmx_pci_dma_cntx_s cn50xx; + struct cvmx_pci_dma_cntx_s cn58xx; + struct cvmx_pci_dma_cntx_s cn58xxp1; +}; + +union cvmx_pci_dma_int_levx { + uint32_t u32; + struct cvmx_pci_dma_int_levx_s { + uint32_t pkt_cnt:32; + } s; + struct cvmx_pci_dma_int_levx_s cn30xx; + struct cvmx_pci_dma_int_levx_s cn31xx; + struct cvmx_pci_dma_int_levx_s cn38xx; + struct cvmx_pci_dma_int_levx_s cn38xxp2; + struct cvmx_pci_dma_int_levx_s cn50xx; + struct cvmx_pci_dma_int_levx_s cn58xx; + struct cvmx_pci_dma_int_levx_s cn58xxp1; +}; + +union cvmx_pci_dma_timex { + uint32_t u32; + struct cvmx_pci_dma_timex_s { + uint32_t dma_time:32; + } s; + struct cvmx_pci_dma_timex_s cn30xx; + struct cvmx_pci_dma_timex_s cn31xx; + struct cvmx_pci_dma_timex_s cn38xx; + struct cvmx_pci_dma_timex_s cn38xxp2; + struct cvmx_pci_dma_timex_s cn50xx; + struct cvmx_pci_dma_timex_s cn58xx; + struct cvmx_pci_dma_timex_s cn58xxp1; +}; + +union cvmx_pci_instr_countx { + uint32_t u32; + struct cvmx_pci_instr_countx_s { + uint32_t icnt:32; + } s; + struct cvmx_pci_instr_countx_s cn30xx; + struct cvmx_pci_instr_countx_s cn31xx; + struct cvmx_pci_instr_countx_s cn38xx; + struct cvmx_pci_instr_countx_s cn38xxp2; + struct cvmx_pci_instr_countx_s cn50xx; + struct cvmx_pci_instr_countx_s cn58xx; + struct cvmx_pci_instr_countx_s cn58xxp1; +}; + +union cvmx_pci_int_enb { + uint64_t u64; + struct cvmx_pci_int_enb_s { + uint64_t reserved_34_63:30; + uint64_t ill_rd:1; + uint64_t ill_wr:1; + uint64_t win_wr:1; + uint64_t dma1_fi:1; + uint64_t dma0_fi:1; + uint64_t idtime1:1; + uint64_t idtime0:1; + uint64_t idcnt1:1; + uint64_t idcnt0:1; + uint64_t iptime3:1; + uint64_t iptime2:1; + uint64_t iptime1:1; + uint64_t iptime0:1; + uint64_t ipcnt3:1; + uint64_t ipcnt2:1; + uint64_t ipcnt1:1; + uint64_t ipcnt0:1; + uint64_t irsl_int:1; + uint64_t ill_rrd:1; + uint64_t ill_rwr:1; + uint64_t idperr:1; + uint64_t iaperr:1; + uint64_t iserr:1; + uint64_t itsr_abt:1; + uint64_t imsc_msg:1; + uint64_t imsi_mabt:1; + uint64_t imsi_tabt:1; + uint64_t imsi_per:1; + uint64_t imr_tto:1; + uint64_t imr_abt:1; + uint64_t itr_abt:1; + uint64_t imr_wtto:1; + uint64_t imr_wabt:1; + uint64_t itr_wabt:1; + } s; + struct cvmx_pci_int_enb_cn30xx { + uint64_t reserved_34_63:30; + uint64_t ill_rd:1; + uint64_t ill_wr:1; + uint64_t win_wr:1; + uint64_t dma1_fi:1; + uint64_t dma0_fi:1; + uint64_t idtime1:1; + uint64_t idtime0:1; + uint64_t idcnt1:1; + uint64_t idcnt0:1; + uint64_t reserved_22_24:3; + uint64_t iptime0:1; + uint64_t reserved_18_20:3; + uint64_t ipcnt0:1; + uint64_t irsl_int:1; + uint64_t ill_rrd:1; + uint64_t ill_rwr:1; + uint64_t idperr:1; + uint64_t iaperr:1; + uint64_t iserr:1; + uint64_t itsr_abt:1; + uint64_t imsc_msg:1; + uint64_t imsi_mabt:1; + uint64_t imsi_tabt:1; + uint64_t imsi_per:1; + uint64_t imr_tto:1; + uint64_t imr_abt:1; + uint64_t itr_abt:1; + uint64_t imr_wtto:1; + uint64_t imr_wabt:1; + uint64_t itr_wabt:1; + } cn30xx; + struct cvmx_pci_int_enb_cn31xx { + uint64_t reserved_34_63:30; + uint64_t ill_rd:1; + uint64_t ill_wr:1; + uint64_t win_wr:1; + uint64_t dma1_fi:1; + uint64_t dma0_fi:1; + uint64_t idtime1:1; + uint64_t idtime0:1; + uint64_t idcnt1:1; + uint64_t idcnt0:1; + uint64_t reserved_23_24:2; + uint64_t iptime1:1; + uint64_t iptime0:1; + uint64_t reserved_19_20:2; + uint64_t ipcnt1:1; + uint64_t ipcnt0:1; + uint64_t irsl_int:1; + uint64_t ill_rrd:1; + uint64_t ill_rwr:1; + uint64_t idperr:1; + uint64_t iaperr:1; + uint64_t iserr:1; + uint64_t itsr_abt:1; + uint64_t imsc_msg:1; + uint64_t imsi_mabt:1; + uint64_t imsi_tabt:1; + uint64_t imsi_per:1; + uint64_t imr_tto:1; + uint64_t imr_abt:1; + uint64_t itr_abt:1; + uint64_t imr_wtto:1; + uint64_t imr_wabt:1; + uint64_t itr_wabt:1; + } cn31xx; + struct cvmx_pci_int_enb_s cn38xx; + struct cvmx_pci_int_enb_s cn38xxp2; + struct cvmx_pci_int_enb_cn31xx cn50xx; + struct cvmx_pci_int_enb_s cn58xx; + struct cvmx_pci_int_enb_s cn58xxp1; +}; + +union cvmx_pci_int_enb2 { + uint64_t u64; + struct cvmx_pci_int_enb2_s { + uint64_t reserved_34_63:30; + uint64_t ill_rd:1; + uint64_t ill_wr:1; + uint64_t win_wr:1; + uint64_t dma1_fi:1; + uint64_t dma0_fi:1; + uint64_t rdtime1:1; + uint64_t rdtime0:1; + uint64_t rdcnt1:1; + uint64_t rdcnt0:1; + uint64_t rptime3:1; + uint64_t rptime2:1; + uint64_t rptime1:1; + uint64_t rptime0:1; + uint64_t rpcnt3:1; + uint64_t rpcnt2:1; + uint64_t rpcnt1:1; + uint64_t rpcnt0:1; + uint64_t rrsl_int:1; + uint64_t ill_rrd:1; + uint64_t ill_rwr:1; + uint64_t rdperr:1; + uint64_t raperr:1; + uint64_t rserr:1; + uint64_t rtsr_abt:1; + uint64_t rmsc_msg:1; + uint64_t rmsi_mabt:1; + uint64_t rmsi_tabt:1; + uint64_t rmsi_per:1; + uint64_t rmr_tto:1; + uint64_t rmr_abt:1; + uint64_t rtr_abt:1; + uint64_t rmr_wtto:1; + uint64_t rmr_wabt:1; + uint64_t rtr_wabt:1; + } s; + struct cvmx_pci_int_enb2_cn30xx { + uint64_t reserved_34_63:30; + uint64_t ill_rd:1; + uint64_t ill_wr:1; + uint64_t win_wr:1; + uint64_t dma1_fi:1; + uint64_t dma0_fi:1; + uint64_t rdtime1:1; + uint64_t rdtime0:1; + uint64_t rdcnt1:1; + uint64_t rdcnt0:1; + uint64_t reserved_22_24:3; + uint64_t rptime0:1; + uint64_t reserved_18_20:3; + uint64_t rpcnt0:1; + uint64_t rrsl_int:1; + uint64_t ill_rrd:1; + uint64_t ill_rwr:1; + uint64_t rdperr:1; + uint64_t raperr:1; + uint64_t rserr:1; + uint64_t rtsr_abt:1; + uint64_t rmsc_msg:1; + uint64_t rmsi_mabt:1; + uint64_t rmsi_tabt:1; + uint64_t rmsi_per:1; + uint64_t rmr_tto:1; + uint64_t rmr_abt:1; + uint64_t rtr_abt:1; + uint64_t rmr_wtto:1; + uint64_t rmr_wabt:1; + uint64_t rtr_wabt:1; + } cn30xx; + struct cvmx_pci_int_enb2_cn31xx { + uint64_t reserved_34_63:30; + uint64_t ill_rd:1; + uint64_t ill_wr:1; + uint64_t win_wr:1; + uint64_t dma1_fi:1; + uint64_t dma0_fi:1; + uint64_t rdtime1:1; + uint64_t rdtime0:1; + uint64_t rdcnt1:1; + uint64_t rdcnt0:1; + uint64_t reserved_23_24:2; + uint64_t rptime1:1; + uint64_t rptime0:1; + uint64_t reserved_19_20:2; + uint64_t rpcnt1:1; + uint64_t rpcnt0:1; + uint64_t rrsl_int:1; + uint64_t ill_rrd:1; + uint64_t ill_rwr:1; + uint64_t rdperr:1; + uint64_t raperr:1; + uint64_t rserr:1; + uint64_t rtsr_abt:1; + uint64_t rmsc_msg:1; + uint64_t rmsi_mabt:1; + uint64_t rmsi_tabt:1; + uint64_t rmsi_per:1; + uint64_t rmr_tto:1; + uint64_t rmr_abt:1; + uint64_t rtr_abt:1; + uint64_t rmr_wtto:1; + uint64_t rmr_wabt:1; + uint64_t rtr_wabt:1; + } cn31xx; + struct cvmx_pci_int_enb2_s cn38xx; + struct cvmx_pci_int_enb2_s cn38xxp2; + struct cvmx_pci_int_enb2_cn31xx cn50xx; + struct cvmx_pci_int_enb2_s cn58xx; + struct cvmx_pci_int_enb2_s cn58xxp1; +}; + +union cvmx_pci_int_sum { + uint64_t u64; + struct cvmx_pci_int_sum_s { + uint64_t reserved_34_63:30; + uint64_t ill_rd:1; + uint64_t ill_wr:1; + uint64_t win_wr:1; + uint64_t dma1_fi:1; + uint64_t dma0_fi:1; + uint64_t dtime1:1; + uint64_t dtime0:1; + uint64_t dcnt1:1; + uint64_t dcnt0:1; + uint64_t ptime3:1; + uint64_t ptime2:1; + uint64_t ptime1:1; + uint64_t ptime0:1; + uint64_t pcnt3:1; + uint64_t pcnt2:1; + uint64_t pcnt1:1; + uint64_t pcnt0:1; + uint64_t rsl_int:1; + uint64_t ill_rrd:1; + uint64_t ill_rwr:1; + uint64_t dperr:1; + uint64_t aperr:1; + uint64_t serr:1; + uint64_t tsr_abt:1; + uint64_t msc_msg:1; + uint64_t msi_mabt:1; + uint64_t msi_tabt:1; + uint64_t msi_per:1; + uint64_t mr_tto:1; + uint64_t mr_abt:1; + uint64_t tr_abt:1; + uint64_t mr_wtto:1; + uint64_t mr_wabt:1; + uint64_t tr_wabt:1; + } s; + struct cvmx_pci_int_sum_cn30xx { + uint64_t reserved_34_63:30; + uint64_t ill_rd:1; + uint64_t ill_wr:1; + uint64_t win_wr:1; + uint64_t dma1_fi:1; + uint64_t dma0_fi:1; + uint64_t dtime1:1; + uint64_t dtime0:1; + uint64_t dcnt1:1; + uint64_t dcnt0:1; + uint64_t reserved_22_24:3; + uint64_t ptime0:1; + uint64_t reserved_18_20:3; + uint64_t pcnt0:1; + uint64_t rsl_int:1; + uint64_t ill_rrd:1; + uint64_t ill_rwr:1; + uint64_t dperr:1; + uint64_t aperr:1; + uint64_t serr:1; + uint64_t tsr_abt:1; + uint64_t msc_msg:1; + uint64_t msi_mabt:1; + uint64_t msi_tabt:1; + uint64_t msi_per:1; + uint64_t mr_tto:1; + uint64_t mr_abt:1; + uint64_t tr_abt:1; + uint64_t mr_wtto:1; + uint64_t mr_wabt:1; + uint64_t tr_wabt:1; + } cn30xx; + struct cvmx_pci_int_sum_cn31xx { + uint64_t reserved_34_63:30; + uint64_t ill_rd:1; + uint64_t ill_wr:1; + uint64_t win_wr:1; + uint64_t dma1_fi:1; + uint64_t dma0_fi:1; + uint64_t dtime1:1; + uint64_t dtime0:1; + uint64_t dcnt1:1; + uint64_t dcnt0:1; + uint64_t reserved_23_24:2; + uint64_t ptime1:1; + uint64_t ptime0:1; + uint64_t reserved_19_20:2; + uint64_t pcnt1:1; + uint64_t pcnt0:1; + uint64_t rsl_int:1; + uint64_t ill_rrd:1; + uint64_t ill_rwr:1; + uint64_t dperr:1; + uint64_t aperr:1; + uint64_t serr:1; + uint64_t tsr_abt:1; + uint64_t msc_msg:1; + uint64_t msi_mabt:1; + uint64_t msi_tabt:1; + uint64_t msi_per:1; + uint64_t mr_tto:1; + uint64_t mr_abt:1; + uint64_t tr_abt:1; + uint64_t mr_wtto:1; + uint64_t mr_wabt:1; + uint64_t tr_wabt:1; + } cn31xx; + struct cvmx_pci_int_sum_s cn38xx; + struct cvmx_pci_int_sum_s cn38xxp2; + struct cvmx_pci_int_sum_cn31xx cn50xx; + struct cvmx_pci_int_sum_s cn58xx; + struct cvmx_pci_int_sum_s cn58xxp1; +}; + +union cvmx_pci_int_sum2 { + uint64_t u64; + struct cvmx_pci_int_sum2_s { + uint64_t reserved_34_63:30; + uint64_t ill_rd:1; + uint64_t ill_wr:1; + uint64_t win_wr:1; + uint64_t dma1_fi:1; + uint64_t dma0_fi:1; + uint64_t dtime1:1; + uint64_t dtime0:1; + uint64_t dcnt1:1; + uint64_t dcnt0:1; + uint64_t ptime3:1; + uint64_t ptime2:1; + uint64_t ptime1:1; + uint64_t ptime0:1; + uint64_t pcnt3:1; + uint64_t pcnt2:1; + uint64_t pcnt1:1; + uint64_t pcnt0:1; + uint64_t rsl_int:1; + uint64_t ill_rrd:1; + uint64_t ill_rwr:1; + uint64_t dperr:1; + uint64_t aperr:1; + uint64_t serr:1; + uint64_t tsr_abt:1; + uint64_t msc_msg:1; + uint64_t msi_mabt:1; + uint64_t msi_tabt:1; + uint64_t msi_per:1; + uint64_t mr_tto:1; + uint64_t mr_abt:1; + uint64_t tr_abt:1; + uint64_t mr_wtto:1; + uint64_t mr_wabt:1; + uint64_t tr_wabt:1; + } s; + struct cvmx_pci_int_sum2_cn30xx { + uint64_t reserved_34_63:30; + uint64_t ill_rd:1; + uint64_t ill_wr:1; + uint64_t win_wr:1; + uint64_t dma1_fi:1; + uint64_t dma0_fi:1; + uint64_t dtime1:1; + uint64_t dtime0:1; + uint64_t dcnt1:1; + uint64_t dcnt0:1; + uint64_t reserved_22_24:3; + uint64_t ptime0:1; + uint64_t reserved_18_20:3; + uint64_t pcnt0:1; + uint64_t rsl_int:1; + uint64_t ill_rrd:1; + uint64_t ill_rwr:1; + uint64_t dperr:1; + uint64_t aperr:1; + uint64_t serr:1; + uint64_t tsr_abt:1; + uint64_t msc_msg:1; + uint64_t msi_mabt:1; + uint64_t msi_tabt:1; + uint64_t msi_per:1; + uint64_t mr_tto:1; + uint64_t mr_abt:1; + uint64_t tr_abt:1; + uint64_t mr_wtto:1; + uint64_t mr_wabt:1; + uint64_t tr_wabt:1; + } cn30xx; + struct cvmx_pci_int_sum2_cn31xx { + uint64_t reserved_34_63:30; + uint64_t ill_rd:1; + uint64_t ill_wr:1; + uint64_t win_wr:1; + uint64_t dma1_fi:1; + uint64_t dma0_fi:1; + uint64_t dtime1:1; + uint64_t dtime0:1; + uint64_t dcnt1:1; + uint64_t dcnt0:1; + uint64_t reserved_23_24:2; + uint64_t ptime1:1; + uint64_t ptime0:1; + uint64_t reserved_19_20:2; + uint64_t pcnt1:1; + uint64_t pcnt0:1; + uint64_t rsl_int:1; + uint64_t ill_rrd:1; + uint64_t ill_rwr:1; + uint64_t dperr:1; + uint64_t aperr:1; + uint64_t serr:1; + uint64_t tsr_abt:1; + uint64_t msc_msg:1; + uint64_t msi_mabt:1; + uint64_t msi_tabt:1; + uint64_t msi_per:1; + uint64_t mr_tto:1; + uint64_t mr_abt:1; + uint64_t tr_abt:1; + uint64_t mr_wtto:1; + uint64_t mr_wabt:1; + uint64_t tr_wabt:1; + } cn31xx; + struct cvmx_pci_int_sum2_s cn38xx; + struct cvmx_pci_int_sum2_s cn38xxp2; + struct cvmx_pci_int_sum2_cn31xx cn50xx; + struct cvmx_pci_int_sum2_s cn58xx; + struct cvmx_pci_int_sum2_s cn58xxp1; +}; + +union cvmx_pci_msi_rcv { + uint32_t u32; + struct cvmx_pci_msi_rcv_s { + uint32_t reserved_6_31:26; + uint32_t intr:6; + } s; + struct cvmx_pci_msi_rcv_s cn30xx; + struct cvmx_pci_msi_rcv_s cn31xx; + struct cvmx_pci_msi_rcv_s cn38xx; + struct cvmx_pci_msi_rcv_s cn38xxp2; + struct cvmx_pci_msi_rcv_s cn50xx; + struct cvmx_pci_msi_rcv_s cn58xx; + struct cvmx_pci_msi_rcv_s cn58xxp1; +}; + +union cvmx_pci_pkt_creditsx { + uint32_t u32; + struct cvmx_pci_pkt_creditsx_s { + uint32_t pkt_cnt:16; + uint32_t ptr_cnt:16; + } s; + struct cvmx_pci_pkt_creditsx_s cn30xx; + struct cvmx_pci_pkt_creditsx_s cn31xx; + struct cvmx_pci_pkt_creditsx_s cn38xx; + struct cvmx_pci_pkt_creditsx_s cn38xxp2; + struct cvmx_pci_pkt_creditsx_s cn50xx; + struct cvmx_pci_pkt_creditsx_s cn58xx; + struct cvmx_pci_pkt_creditsx_s cn58xxp1; +}; + +union cvmx_pci_pkts_sentx { + uint32_t u32; + struct cvmx_pci_pkts_sentx_s { + uint32_t pkt_cnt:32; + } s; + struct cvmx_pci_pkts_sentx_s cn30xx; + struct cvmx_pci_pkts_sentx_s cn31xx; + struct cvmx_pci_pkts_sentx_s cn38xx; + struct cvmx_pci_pkts_sentx_s cn38xxp2; + struct cvmx_pci_pkts_sentx_s cn50xx; + struct cvmx_pci_pkts_sentx_s cn58xx; + struct cvmx_pci_pkts_sentx_s cn58xxp1; +}; + +union cvmx_pci_pkts_sent_int_levx { + uint32_t u32; + struct cvmx_pci_pkts_sent_int_levx_s { + uint32_t pkt_cnt:32; + } s; + struct cvmx_pci_pkts_sent_int_levx_s cn30xx; + struct cvmx_pci_pkts_sent_int_levx_s cn31xx; + struct cvmx_pci_pkts_sent_int_levx_s cn38xx; + struct cvmx_pci_pkts_sent_int_levx_s cn38xxp2; + struct cvmx_pci_pkts_sent_int_levx_s cn50xx; + struct cvmx_pci_pkts_sent_int_levx_s cn58xx; + struct cvmx_pci_pkts_sent_int_levx_s cn58xxp1; +}; + +union cvmx_pci_pkts_sent_timex { + uint32_t u32; + struct cvmx_pci_pkts_sent_timex_s { + uint32_t pkt_time:32; + } s; + struct cvmx_pci_pkts_sent_timex_s cn30xx; + struct cvmx_pci_pkts_sent_timex_s cn31xx; + struct cvmx_pci_pkts_sent_timex_s cn38xx; + struct cvmx_pci_pkts_sent_timex_s cn38xxp2; + struct cvmx_pci_pkts_sent_timex_s cn50xx; + struct cvmx_pci_pkts_sent_timex_s cn58xx; + struct cvmx_pci_pkts_sent_timex_s cn58xxp1; +}; + +union cvmx_pci_read_cmd_6 { + uint32_t u32; + struct cvmx_pci_read_cmd_6_s { + uint32_t reserved_9_31:23; + uint32_t min_data:6; + uint32_t prefetch:3; + } s; + struct cvmx_pci_read_cmd_6_s cn30xx; + struct cvmx_pci_read_cmd_6_s cn31xx; + struct cvmx_pci_read_cmd_6_s cn38xx; + struct cvmx_pci_read_cmd_6_s cn38xxp2; + struct cvmx_pci_read_cmd_6_s cn50xx; + struct cvmx_pci_read_cmd_6_s cn58xx; + struct cvmx_pci_read_cmd_6_s cn58xxp1; +}; + +union cvmx_pci_read_cmd_c { + uint32_t u32; + struct cvmx_pci_read_cmd_c_s { + uint32_t reserved_9_31:23; + uint32_t min_data:6; + uint32_t prefetch:3; + } s; + struct cvmx_pci_read_cmd_c_s cn30xx; + struct cvmx_pci_read_cmd_c_s cn31xx; + struct cvmx_pci_read_cmd_c_s cn38xx; + struct cvmx_pci_read_cmd_c_s cn38xxp2; + struct cvmx_pci_read_cmd_c_s cn50xx; + struct cvmx_pci_read_cmd_c_s cn58xx; + struct cvmx_pci_read_cmd_c_s cn58xxp1; +}; + +union cvmx_pci_read_cmd_e { + uint32_t u32; + struct cvmx_pci_read_cmd_e_s { + uint32_t reserved_9_31:23; + uint32_t min_data:6; + uint32_t prefetch:3; + } s; + struct cvmx_pci_read_cmd_e_s cn30xx; + struct cvmx_pci_read_cmd_e_s cn31xx; + struct cvmx_pci_read_cmd_e_s cn38xx; + struct cvmx_pci_read_cmd_e_s cn38xxp2; + struct cvmx_pci_read_cmd_e_s cn50xx; + struct cvmx_pci_read_cmd_e_s cn58xx; + struct cvmx_pci_read_cmd_e_s cn58xxp1; +}; + +union cvmx_pci_read_timeout { + uint64_t u64; + struct cvmx_pci_read_timeout_s { + uint64_t reserved_32_63:32; + uint64_t enb:1; + uint64_t cnt:31; + } s; + struct cvmx_pci_read_timeout_s cn30xx; + struct cvmx_pci_read_timeout_s cn31xx; + struct cvmx_pci_read_timeout_s cn38xx; + struct cvmx_pci_read_timeout_s cn38xxp2; + struct cvmx_pci_read_timeout_s cn50xx; + struct cvmx_pci_read_timeout_s cn58xx; + struct cvmx_pci_read_timeout_s cn58xxp1; +}; + +union cvmx_pci_scm_reg { + uint64_t u64; + struct cvmx_pci_scm_reg_s { + uint64_t reserved_32_63:32; + uint64_t scm:32; + } s; + struct cvmx_pci_scm_reg_s cn30xx; + struct cvmx_pci_scm_reg_s cn31xx; + struct cvmx_pci_scm_reg_s cn38xx; + struct cvmx_pci_scm_reg_s cn38xxp2; + struct cvmx_pci_scm_reg_s cn50xx; + struct cvmx_pci_scm_reg_s cn58xx; + struct cvmx_pci_scm_reg_s cn58xxp1; +}; + +union cvmx_pci_tsr_reg { + uint64_t u64; + struct cvmx_pci_tsr_reg_s { + uint64_t reserved_36_63:28; + uint64_t tsr:36; + } s; + struct cvmx_pci_tsr_reg_s cn30xx; + struct cvmx_pci_tsr_reg_s cn31xx; + struct cvmx_pci_tsr_reg_s cn38xx; + struct cvmx_pci_tsr_reg_s cn38xxp2; + struct cvmx_pci_tsr_reg_s cn50xx; + struct cvmx_pci_tsr_reg_s cn58xx; + struct cvmx_pci_tsr_reg_s cn58xxp1; +}; + +union cvmx_pci_win_rd_addr { + uint64_t u64; + struct cvmx_pci_win_rd_addr_s { + uint64_t reserved_49_63:15; + uint64_t iobit:1; + uint64_t reserved_0_47:48; + } s; + struct cvmx_pci_win_rd_addr_cn30xx { + uint64_t reserved_49_63:15; + uint64_t iobit:1; + uint64_t rd_addr:46; + uint64_t reserved_0_1:2; + } cn30xx; + struct cvmx_pci_win_rd_addr_cn30xx cn31xx; + struct cvmx_pci_win_rd_addr_cn38xx { + uint64_t reserved_49_63:15; + uint64_t iobit:1; + uint64_t rd_addr:45; + uint64_t reserved_0_2:3; + } cn38xx; + struct cvmx_pci_win_rd_addr_cn38xx cn38xxp2; + struct cvmx_pci_win_rd_addr_cn30xx cn50xx; + struct cvmx_pci_win_rd_addr_cn38xx cn58xx; + struct cvmx_pci_win_rd_addr_cn38xx cn58xxp1; +}; + +union cvmx_pci_win_rd_data { + uint64_t u64; + struct cvmx_pci_win_rd_data_s { + uint64_t rd_data:64; + } s; + struct cvmx_pci_win_rd_data_s cn30xx; + struct cvmx_pci_win_rd_data_s cn31xx; + struct cvmx_pci_win_rd_data_s cn38xx; + struct cvmx_pci_win_rd_data_s cn38xxp2; + struct cvmx_pci_win_rd_data_s cn50xx; + struct cvmx_pci_win_rd_data_s cn58xx; + struct cvmx_pci_win_rd_data_s cn58xxp1; +}; + +union cvmx_pci_win_wr_addr { + uint64_t u64; + struct cvmx_pci_win_wr_addr_s { + uint64_t reserved_49_63:15; + uint64_t iobit:1; + uint64_t wr_addr:45; + uint64_t reserved_0_2:3; + } s; + struct cvmx_pci_win_wr_addr_s cn30xx; + struct cvmx_pci_win_wr_addr_s cn31xx; + struct cvmx_pci_win_wr_addr_s cn38xx; + struct cvmx_pci_win_wr_addr_s cn38xxp2; + struct cvmx_pci_win_wr_addr_s cn50xx; + struct cvmx_pci_win_wr_addr_s cn58xx; + struct cvmx_pci_win_wr_addr_s cn58xxp1; +}; + +union cvmx_pci_win_wr_data { + uint64_t u64; + struct cvmx_pci_win_wr_data_s { + uint64_t wr_data:64; + } s; + struct cvmx_pci_win_wr_data_s cn30xx; + struct cvmx_pci_win_wr_data_s cn31xx; + struct cvmx_pci_win_wr_data_s cn38xx; + struct cvmx_pci_win_wr_data_s cn38xxp2; + struct cvmx_pci_win_wr_data_s cn50xx; + struct cvmx_pci_win_wr_data_s cn58xx; + struct cvmx_pci_win_wr_data_s cn58xxp1; +}; + +union cvmx_pci_win_wr_mask { + uint64_t u64; + struct cvmx_pci_win_wr_mask_s { + uint64_t reserved_8_63:56; + uint64_t wr_mask:8; + } s; + struct cvmx_pci_win_wr_mask_s cn30xx; + struct cvmx_pci_win_wr_mask_s cn31xx; + struct cvmx_pci_win_wr_mask_s cn38xx; + struct cvmx_pci_win_wr_mask_s cn38xxp2; + struct cvmx_pci_win_wr_mask_s cn50xx; + struct cvmx_pci_win_wr_mask_s cn58xx; + struct cvmx_pci_win_wr_mask_s cn58xxp1; +}; + +#endif diff --git a/arch/mips/include/asm/octeon/cvmx-pcieep-defs.h b/arch/mips/include/asm/octeon/cvmx-pcieep-defs.h new file mode 100644 index 0000000..d553f8e --- /dev/null +++ b/arch/mips/include/asm/octeon/cvmx-pcieep-defs.h @@ -0,0 +1,1365 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +#ifndef __CVMX_PCIEEP_DEFS_H__ +#define __CVMX_PCIEEP_DEFS_H__ + +#define CVMX_PCIEEP_CFG000 \ + (0x0000000000000000ull) +#define CVMX_PCIEEP_CFG001 \ + (0x0000000000000004ull) +#define CVMX_PCIEEP_CFG002 \ + (0x0000000000000008ull) +#define CVMX_PCIEEP_CFG003 \ + (0x000000000000000Cull) +#define CVMX_PCIEEP_CFG004 \ + (0x0000000000000010ull) +#define CVMX_PCIEEP_CFG004_MASK \ + (0x0000000080000010ull) +#define CVMX_PCIEEP_CFG005 \ + (0x0000000000000014ull) +#define CVMX_PCIEEP_CFG005_MASK \ + (0x0000000080000014ull) +#define CVMX_PCIEEP_CFG006 \ + (0x0000000000000018ull) +#define CVMX_PCIEEP_CFG006_MASK \ + (0x0000000080000018ull) +#define CVMX_PCIEEP_CFG007 \ + (0x000000000000001Cull) +#define CVMX_PCIEEP_CFG007_MASK \ + (0x000000008000001Cull) +#define CVMX_PCIEEP_CFG008 \ + (0x0000000000000020ull) +#define CVMX_PCIEEP_CFG008_MASK \ + (0x0000000080000020ull) +#define CVMX_PCIEEP_CFG009 \ + (0x0000000000000024ull) +#define CVMX_PCIEEP_CFG009_MASK \ + (0x0000000080000024ull) +#define CVMX_PCIEEP_CFG010 \ + (0x0000000000000028ull) +#define CVMX_PCIEEP_CFG011 \ + (0x000000000000002Cull) +#define CVMX_PCIEEP_CFG012 \ + (0x0000000000000030ull) +#define CVMX_PCIEEP_CFG012_MASK \ + (0x0000000080000030ull) +#define CVMX_PCIEEP_CFG013 \ + (0x0000000000000034ull) +#define CVMX_PCIEEP_CFG015 \ + (0x000000000000003Cull) +#define CVMX_PCIEEP_CFG016 \ + (0x0000000000000040ull) +#define CVMX_PCIEEP_CFG017 \ + (0x0000000000000044ull) +#define CVMX_PCIEEP_CFG020 \ + (0x0000000000000050ull) +#define CVMX_PCIEEP_CFG021 \ + (0x0000000000000054ull) +#define CVMX_PCIEEP_CFG022 \ + (0x0000000000000058ull) +#define CVMX_PCIEEP_CFG023 \ + (0x000000000000005Cull) +#define CVMX_PCIEEP_CFG028 \ + (0x0000000000000070ull) +#define CVMX_PCIEEP_CFG029 \ + (0x0000000000000074ull) +#define CVMX_PCIEEP_CFG030 \ + (0x0000000000000078ull) +#define CVMX_PCIEEP_CFG031 \ + (0x000000000000007Cull) +#define CVMX_PCIEEP_CFG032 \ + (0x0000000000000080ull) +#define CVMX_PCIEEP_CFG033 \ + (0x0000000000000084ull) +#define CVMX_PCIEEP_CFG034 \ + (0x0000000000000088ull) +#define CVMX_PCIEEP_CFG037 \ + (0x0000000000000094ull) +#define CVMX_PCIEEP_CFG038 \ + (0x0000000000000098ull) +#define CVMX_PCIEEP_CFG039 \ + (0x000000000000009Cull) +#define CVMX_PCIEEP_CFG040 \ + (0x00000000000000A0ull) +#define CVMX_PCIEEP_CFG041 \ + (0x00000000000000A4ull) +#define CVMX_PCIEEP_CFG042 \ + (0x00000000000000A8ull) +#define CVMX_PCIEEP_CFG064 \ + (0x0000000000000100ull) +#define CVMX_PCIEEP_CFG065 \ + (0x0000000000000104ull) +#define CVMX_PCIEEP_CFG066 \ + (0x0000000000000108ull) +#define CVMX_PCIEEP_CFG067 \ + (0x000000000000010Cull) +#define CVMX_PCIEEP_CFG068 \ + (0x0000000000000110ull) +#define CVMX_PCIEEP_CFG069 \ + (0x0000000000000114ull) +#define CVMX_PCIEEP_CFG070 \ + (0x0000000000000118ull) +#define CVMX_PCIEEP_CFG071 \ + (0x000000000000011Cull) +#define CVMX_PCIEEP_CFG072 \ + (0x0000000000000120ull) +#define CVMX_PCIEEP_CFG073 \ + (0x0000000000000124ull) +#define CVMX_PCIEEP_CFG074 \ + (0x0000000000000128ull) +#define CVMX_PCIEEP_CFG448 \ + (0x0000000000000700ull) +#define CVMX_PCIEEP_CFG449 \ + (0x0000000000000704ull) +#define CVMX_PCIEEP_CFG450 \ + (0x0000000000000708ull) +#define CVMX_PCIEEP_CFG451 \ + (0x000000000000070Cull) +#define CVMX_PCIEEP_CFG452 \ + (0x0000000000000710ull) +#define CVMX_PCIEEP_CFG453 \ + (0x0000000000000714ull) +#define CVMX_PCIEEP_CFG454 \ + (0x0000000000000718ull) +#define CVMX_PCIEEP_CFG455 \ + (0x000000000000071Cull) +#define CVMX_PCIEEP_CFG456 \ + (0x0000000000000720ull) +#define CVMX_PCIEEP_CFG458 \ + (0x0000000000000728ull) +#define CVMX_PCIEEP_CFG459 \ + (0x000000000000072Cull) +#define CVMX_PCIEEP_CFG460 \ + (0x0000000000000730ull) +#define CVMX_PCIEEP_CFG461 \ + (0x0000000000000734ull) +#define CVMX_PCIEEP_CFG462 \ + (0x0000000000000738ull) +#define CVMX_PCIEEP_CFG463 \ + (0x000000000000073Cull) +#define CVMX_PCIEEP_CFG464 \ + (0x0000000000000740ull) +#define CVMX_PCIEEP_CFG465 \ + (0x0000000000000744ull) +#define CVMX_PCIEEP_CFG466 \ + (0x0000000000000748ull) +#define CVMX_PCIEEP_CFG467 \ + (0x000000000000074Cull) +#define CVMX_PCIEEP_CFG468 \ + (0x0000000000000750ull) +#define CVMX_PCIEEP_CFG490 \ + (0x00000000000007A8ull) +#define CVMX_PCIEEP_CFG491 \ + (0x00000000000007ACull) +#define CVMX_PCIEEP_CFG492 \ + (0x00000000000007B0ull) +#define CVMX_PCIEEP_CFG516 \ + (0x0000000000000810ull) +#define CVMX_PCIEEP_CFG517 \ + (0x0000000000000814ull) + +union cvmx_pcieep_cfg000 { + uint32_t u32; + struct cvmx_pcieep_cfg000_s { + uint32_t devid:16; + uint32_t vendid:16; + } s; + struct cvmx_pcieep_cfg000_s cn52xx; + struct cvmx_pcieep_cfg000_s cn52xxp1; + struct cvmx_pcieep_cfg000_s cn56xx; + struct cvmx_pcieep_cfg000_s cn56xxp1; +}; + +union cvmx_pcieep_cfg001 { + uint32_t u32; + struct cvmx_pcieep_cfg001_s { + uint32_t dpe:1; + uint32_t sse:1; + uint32_t rma:1; + uint32_t rta:1; + uint32_t sta:1; + uint32_t devt:2; + uint32_t mdpe:1; + uint32_t fbb:1; + uint32_t reserved_22_22:1; + uint32_t m66:1; + uint32_t cl:1; + uint32_t i_stat:1; + uint32_t reserved_11_18:8; + uint32_t i_dis:1; + uint32_t fbbe:1; + uint32_t see:1; + uint32_t ids_wcc:1; + uint32_t per:1; + uint32_t vps:1; + uint32_t mwice:1; + uint32_t scse:1; + uint32_t me:1; + uint32_t msae:1; + uint32_t isae:1; + } s; + struct cvmx_pcieep_cfg001_s cn52xx; + struct cvmx_pcieep_cfg001_s cn52xxp1; + struct cvmx_pcieep_cfg001_s cn56xx; + struct cvmx_pcieep_cfg001_s cn56xxp1; +}; + +union cvmx_pcieep_cfg002 { + uint32_t u32; + struct cvmx_pcieep_cfg002_s { + uint32_t bcc:8; + uint32_t sc:8; + uint32_t pi:8; + uint32_t rid:8; + } s; + struct cvmx_pcieep_cfg002_s cn52xx; + struct cvmx_pcieep_cfg002_s cn52xxp1; + struct cvmx_pcieep_cfg002_s cn56xx; + struct cvmx_pcieep_cfg002_s cn56xxp1; +}; + +union cvmx_pcieep_cfg003 { + uint32_t u32; + struct cvmx_pcieep_cfg003_s { + uint32_t bist:8; + uint32_t mfd:1; + uint32_t chf:7; + uint32_t lt:8; + uint32_t cls:8; + } s; + struct cvmx_pcieep_cfg003_s cn52xx; + struct cvmx_pcieep_cfg003_s cn52xxp1; + struct cvmx_pcieep_cfg003_s cn56xx; + struct cvmx_pcieep_cfg003_s cn56xxp1; +}; + +union cvmx_pcieep_cfg004 { + uint32_t u32; + struct cvmx_pcieep_cfg004_s { + uint32_t lbab:18; + uint32_t reserved_4_13:10; + uint32_t pf:1; + uint32_t typ:2; + uint32_t mspc:1; + } s; + struct cvmx_pcieep_cfg004_s cn52xx; + struct cvmx_pcieep_cfg004_s cn52xxp1; + struct cvmx_pcieep_cfg004_s cn56xx; + struct cvmx_pcieep_cfg004_s cn56xxp1; +}; + +union cvmx_pcieep_cfg004_mask { + uint32_t u32; + struct cvmx_pcieep_cfg004_mask_s { + uint32_t lmask:31; + uint32_t enb:1; + } s; + struct cvmx_pcieep_cfg004_mask_s cn52xx; + struct cvmx_pcieep_cfg004_mask_s cn52xxp1; + struct cvmx_pcieep_cfg004_mask_s cn56xx; + struct cvmx_pcieep_cfg004_mask_s cn56xxp1; +}; + +union cvmx_pcieep_cfg005 { + uint32_t u32; + struct cvmx_pcieep_cfg005_s { + uint32_t ubab:32; + } s; + struct cvmx_pcieep_cfg005_s cn52xx; + struct cvmx_pcieep_cfg005_s cn52xxp1; + struct cvmx_pcieep_cfg005_s cn56xx; + struct cvmx_pcieep_cfg005_s cn56xxp1; +}; + +union cvmx_pcieep_cfg005_mask { + uint32_t u32; + struct cvmx_pcieep_cfg005_mask_s { + uint32_t umask:32; + } s; + struct cvmx_pcieep_cfg005_mask_s cn52xx; + struct cvmx_pcieep_cfg005_mask_s cn52xxp1; + struct cvmx_pcieep_cfg005_mask_s cn56xx; + struct cvmx_pcieep_cfg005_mask_s cn56xxp1; +}; + +union cvmx_pcieep_cfg006 { + uint32_t u32; + struct cvmx_pcieep_cfg006_s { + uint32_t lbab:6; + uint32_t reserved_4_25:22; + uint32_t pf:1; + uint32_t typ:2; + uint32_t mspc:1; + } s; + struct cvmx_pcieep_cfg006_s cn52xx; + struct cvmx_pcieep_cfg006_s cn52xxp1; + struct cvmx_pcieep_cfg006_s cn56xx; + struct cvmx_pcieep_cfg006_s cn56xxp1; +}; + +union cvmx_pcieep_cfg006_mask { + uint32_t u32; + struct cvmx_pcieep_cfg006_mask_s { + uint32_t lmask:31; + uint32_t enb:1; + } s; + struct cvmx_pcieep_cfg006_mask_s cn52xx; + struct cvmx_pcieep_cfg006_mask_s cn52xxp1; + struct cvmx_pcieep_cfg006_mask_s cn56xx; + struct cvmx_pcieep_cfg006_mask_s cn56xxp1; +}; + +union cvmx_pcieep_cfg007 { + uint32_t u32; + struct cvmx_pcieep_cfg007_s { + uint32_t ubab:32; + } s; + struct cvmx_pcieep_cfg007_s cn52xx; + struct cvmx_pcieep_cfg007_s cn52xxp1; + struct cvmx_pcieep_cfg007_s cn56xx; + struct cvmx_pcieep_cfg007_s cn56xxp1; +}; + +union cvmx_pcieep_cfg007_mask { + uint32_t u32; + struct cvmx_pcieep_cfg007_mask_s { + uint32_t umask:32; + } s; + struct cvmx_pcieep_cfg007_mask_s cn52xx; + struct cvmx_pcieep_cfg007_mask_s cn52xxp1; + struct cvmx_pcieep_cfg007_mask_s cn56xx; + struct cvmx_pcieep_cfg007_mask_s cn56xxp1; +}; + +union cvmx_pcieep_cfg008 { + uint32_t u32; + struct cvmx_pcieep_cfg008_s { + uint32_t reserved_4_31:28; + uint32_t pf:1; + uint32_t typ:2; + uint32_t mspc:1; + } s; + struct cvmx_pcieep_cfg008_s cn52xx; + struct cvmx_pcieep_cfg008_s cn52xxp1; + struct cvmx_pcieep_cfg008_s cn56xx; + struct cvmx_pcieep_cfg008_s cn56xxp1; +}; + +union cvmx_pcieep_cfg008_mask { + uint32_t u32; + struct cvmx_pcieep_cfg008_mask_s { + uint32_t lmask:31; + uint32_t enb:1; + } s; + struct cvmx_pcieep_cfg008_mask_s cn52xx; + struct cvmx_pcieep_cfg008_mask_s cn52xxp1; + struct cvmx_pcieep_cfg008_mask_s cn56xx; + struct cvmx_pcieep_cfg008_mask_s cn56xxp1; +}; + +union cvmx_pcieep_cfg009 { + uint32_t u32; + struct cvmx_pcieep_cfg009_s { + uint32_t ubab:25; + uint32_t reserved_0_6:7; + } s; + struct cvmx_pcieep_cfg009_s cn52xx; + struct cvmx_pcieep_cfg009_s cn52xxp1; + struct cvmx_pcieep_cfg009_s cn56xx; + struct cvmx_pcieep_cfg009_s cn56xxp1; +}; + +union cvmx_pcieep_cfg009_mask { + uint32_t u32; + struct cvmx_pcieep_cfg009_mask_s { + uint32_t umask:32; + } s; + struct cvmx_pcieep_cfg009_mask_s cn52xx; + struct cvmx_pcieep_cfg009_mask_s cn52xxp1; + struct cvmx_pcieep_cfg009_mask_s cn56xx; + struct cvmx_pcieep_cfg009_mask_s cn56xxp1; +}; + +union cvmx_pcieep_cfg010 { + uint32_t u32; + struct cvmx_pcieep_cfg010_s { + uint32_t cisp:32; + } s; + struct cvmx_pcieep_cfg010_s cn52xx; + struct cvmx_pcieep_cfg010_s cn52xxp1; + struct cvmx_pcieep_cfg010_s cn56xx; + struct cvmx_pcieep_cfg010_s cn56xxp1; +}; + +union cvmx_pcieep_cfg011 { + uint32_t u32; + struct cvmx_pcieep_cfg011_s { + uint32_t ssid:16; + uint32_t ssvid:16; + } s; + struct cvmx_pcieep_cfg011_s cn52xx; + struct cvmx_pcieep_cfg011_s cn52xxp1; + struct cvmx_pcieep_cfg011_s cn56xx; + struct cvmx_pcieep_cfg011_s cn56xxp1; +}; + +union cvmx_pcieep_cfg012 { + uint32_t u32; + struct cvmx_pcieep_cfg012_s { + uint32_t eraddr:16; + uint32_t reserved_1_15:15; + uint32_t er_en:1; + } s; + struct cvmx_pcieep_cfg012_s cn52xx; + struct cvmx_pcieep_cfg012_s cn52xxp1; + struct cvmx_pcieep_cfg012_s cn56xx; + struct cvmx_pcieep_cfg012_s cn56xxp1; +}; + +union cvmx_pcieep_cfg012_mask { + uint32_t u32; + struct cvmx_pcieep_cfg012_mask_s { + uint32_t mask:31; + uint32_t enb:1; + } s; + struct cvmx_pcieep_cfg012_mask_s cn52xx; + struct cvmx_pcieep_cfg012_mask_s cn52xxp1; + struct cvmx_pcieep_cfg012_mask_s cn56xx; + struct cvmx_pcieep_cfg012_mask_s cn56xxp1; +}; + +union cvmx_pcieep_cfg013 { + uint32_t u32; + struct cvmx_pcieep_cfg013_s { + uint32_t reserved_8_31:24; + uint32_t cp:8; + } s; + struct cvmx_pcieep_cfg013_s cn52xx; + struct cvmx_pcieep_cfg013_s cn52xxp1; + struct cvmx_pcieep_cfg013_s cn56xx; + struct cvmx_pcieep_cfg013_s cn56xxp1; +}; + +union cvmx_pcieep_cfg015 { + uint32_t u32; + struct cvmx_pcieep_cfg015_s { + uint32_t ml:8; + uint32_t mg:8; + uint32_t inta:8; + uint32_t il:8; + } s; + struct cvmx_pcieep_cfg015_s cn52xx; + struct cvmx_pcieep_cfg015_s cn52xxp1; + struct cvmx_pcieep_cfg015_s cn56xx; + struct cvmx_pcieep_cfg015_s cn56xxp1; +}; + +union cvmx_pcieep_cfg016 { + uint32_t u32; + struct cvmx_pcieep_cfg016_s { + uint32_t pmes:5; + uint32_t d2s:1; + uint32_t d1s:1; + uint32_t auxc:3; + uint32_t dsi:1; + uint32_t reserved_20_20:1; + uint32_t pme_clock:1; + uint32_t pmsv:3; + uint32_t ncp:8; + uint32_t pmcid:8; + } s; + struct cvmx_pcieep_cfg016_s cn52xx; + struct cvmx_pcieep_cfg016_s cn52xxp1; + struct cvmx_pcieep_cfg016_s cn56xx; + struct cvmx_pcieep_cfg016_s cn56xxp1; +}; + +union cvmx_pcieep_cfg017 { + uint32_t u32; + struct cvmx_pcieep_cfg017_s { + uint32_t pmdia:8; + uint32_t bpccee:1; + uint32_t bd3h:1; + uint32_t reserved_16_21:6; + uint32_t pmess:1; + uint32_t pmedsia:2; + uint32_t pmds:4; + uint32_t pmeens:1; + uint32_t reserved_4_7:4; + uint32_t nsr:1; + uint32_t reserved_2_2:1; + uint32_t ps:2; + } s; + struct cvmx_pcieep_cfg017_s cn52xx; + struct cvmx_pcieep_cfg017_s cn52xxp1; + struct cvmx_pcieep_cfg017_s cn56xx; + struct cvmx_pcieep_cfg017_s cn56xxp1; +}; + +union cvmx_pcieep_cfg020 { + uint32_t u32; + struct cvmx_pcieep_cfg020_s { + uint32_t reserved_24_31:8; + uint32_t m64:1; + uint32_t mme:3; + uint32_t mmc:3; + uint32_t msien:1; + uint32_t ncp:8; + uint32_t msicid:8; + } s; + struct cvmx_pcieep_cfg020_s cn52xx; + struct cvmx_pcieep_cfg020_s cn52xxp1; + struct cvmx_pcieep_cfg020_s cn56xx; + struct cvmx_pcieep_cfg020_s cn56xxp1; +}; + +union cvmx_pcieep_cfg021 { + uint32_t u32; + struct cvmx_pcieep_cfg021_s { + uint32_t lmsi:30; + uint32_t reserved_0_1:2; + } s; + struct cvmx_pcieep_cfg021_s cn52xx; + struct cvmx_pcieep_cfg021_s cn52xxp1; + struct cvmx_pcieep_cfg021_s cn56xx; + struct cvmx_pcieep_cfg021_s cn56xxp1; +}; + +union cvmx_pcieep_cfg022 { + uint32_t u32; + struct cvmx_pcieep_cfg022_s { + uint32_t umsi:32; + } s; + struct cvmx_pcieep_cfg022_s cn52xx; + struct cvmx_pcieep_cfg022_s cn52xxp1; + struct cvmx_pcieep_cfg022_s cn56xx; + struct cvmx_pcieep_cfg022_s cn56xxp1; +}; + +union cvmx_pcieep_cfg023 { + uint32_t u32; + struct cvmx_pcieep_cfg023_s { + uint32_t reserved_16_31:16; + uint32_t msimd:16; + } s; + struct cvmx_pcieep_cfg023_s cn52xx; + struct cvmx_pcieep_cfg023_s cn52xxp1; + struct cvmx_pcieep_cfg023_s cn56xx; + struct cvmx_pcieep_cfg023_s cn56xxp1; +}; + +union cvmx_pcieep_cfg028 { + uint32_t u32; + struct cvmx_pcieep_cfg028_s { + uint32_t reserved_30_31:2; + uint32_t imn:5; + uint32_t si:1; + uint32_t dpt:4; + uint32_t pciecv:4; + uint32_t ncp:8; + uint32_t pcieid:8; + } s; + struct cvmx_pcieep_cfg028_s cn52xx; + struct cvmx_pcieep_cfg028_s cn52xxp1; + struct cvmx_pcieep_cfg028_s cn56xx; + struct cvmx_pcieep_cfg028_s cn56xxp1; +}; + +union cvmx_pcieep_cfg029 { + uint32_t u32; + struct cvmx_pcieep_cfg029_s { + uint32_t reserved_28_31:4; + uint32_t cspls:2; + uint32_t csplv:8; + uint32_t reserved_16_17:2; + uint32_t rber:1; + uint32_t reserved_12_14:3; + uint32_t el1al:3; + uint32_t el0al:3; + uint32_t etfs:1; + uint32_t pfs:2; + uint32_t mpss:3; + } s; + struct cvmx_pcieep_cfg029_s cn52xx; + struct cvmx_pcieep_cfg029_s cn52xxp1; + struct cvmx_pcieep_cfg029_s cn56xx; + struct cvmx_pcieep_cfg029_s cn56xxp1; +}; + +union cvmx_pcieep_cfg030 { + uint32_t u32; + struct cvmx_pcieep_cfg030_s { + uint32_t reserved_22_31:10; + uint32_t tp:1; + uint32_t ap_d:1; + uint32_t ur_d:1; + uint32_t fe_d:1; + uint32_t nfe_d:1; + uint32_t ce_d:1; + uint32_t reserved_15_15:1; + uint32_t mrrs:3; + uint32_t ns_en:1; + uint32_t ap_en:1; + uint32_t pf_en:1; + uint32_t etf_en:1; + uint32_t mps:3; + uint32_t ro_en:1; + uint32_t ur_en:1; + uint32_t fe_en:1; + uint32_t nfe_en:1; + uint32_t ce_en:1; + } s; + struct cvmx_pcieep_cfg030_s cn52xx; + struct cvmx_pcieep_cfg030_s cn52xxp1; + struct cvmx_pcieep_cfg030_s cn56xx; + struct cvmx_pcieep_cfg030_s cn56xxp1; +}; + +union cvmx_pcieep_cfg031 { + uint32_t u32; + struct cvmx_pcieep_cfg031_s { + uint32_t pnum:8; + uint32_t reserved_22_23:2; + uint32_t lbnc:1; + uint32_t dllarc:1; + uint32_t sderc:1; + uint32_t cpm:1; + uint32_t l1el:3; + uint32_t l0el:3; + uint32_t aslpms:2; + uint32_t mlw:6; + uint32_t mls:4; + } s; + struct cvmx_pcieep_cfg031_s cn52xx; + struct cvmx_pcieep_cfg031_s cn52xxp1; + struct cvmx_pcieep_cfg031_s cn56xx; + struct cvmx_pcieep_cfg031_s cn56xxp1; +}; + +union cvmx_pcieep_cfg032 { + uint32_t u32; + struct cvmx_pcieep_cfg032_s { + uint32_t reserved_30_31:2; + uint32_t dlla:1; + uint32_t scc:1; + uint32_t lt:1; + uint32_t reserved_26_26:1; + uint32_t nlw:6; + uint32_t ls:4; + uint32_t reserved_10_15:6; + uint32_t hawd:1; + uint32_t ecpm:1; + uint32_t es:1; + uint32_t ccc:1; + uint32_t rl:1; + uint32_t ld:1; + uint32_t rcb:1; + uint32_t reserved_2_2:1; + uint32_t aslpc:2; + } s; + struct cvmx_pcieep_cfg032_s cn52xx; + struct cvmx_pcieep_cfg032_s cn52xxp1; + struct cvmx_pcieep_cfg032_s cn56xx; + struct cvmx_pcieep_cfg032_s cn56xxp1; +}; + +union cvmx_pcieep_cfg033 { + uint32_t u32; + struct cvmx_pcieep_cfg033_s { + uint32_t ps_num:13; + uint32_t nccs:1; + uint32_t emip:1; + uint32_t sp_ls:2; + uint32_t sp_lv:8; + uint32_t hp_c:1; + uint32_t hp_s:1; + uint32_t pip:1; + uint32_t aip:1; + uint32_t mrlsp:1; + uint32_t pcp:1; + uint32_t abp:1; + } s; + struct cvmx_pcieep_cfg033_s cn52xx; + struct cvmx_pcieep_cfg033_s cn52xxp1; + struct cvmx_pcieep_cfg033_s cn56xx; + struct cvmx_pcieep_cfg033_s cn56xxp1; +}; + +union cvmx_pcieep_cfg034 { + uint32_t u32; + struct cvmx_pcieep_cfg034_s { + uint32_t reserved_25_31:7; + uint32_t dlls_c:1; + uint32_t emis:1; + uint32_t pds:1; + uint32_t mrlss:1; + uint32_t ccint_d:1; + uint32_t pd_c:1; + uint32_t mrls_c:1; + uint32_t pf_d:1; + uint32_t abp_d:1; + uint32_t reserved_13_15:3; + uint32_t dlls_en:1; + uint32_t emic:1; + uint32_t pcc:1; + uint32_t pic:2; + uint32_t aic:2; + uint32_t hpint_en:1; + uint32_t ccint_en:1; + uint32_t pd_en:1; + uint32_t mrls_en:1; + uint32_t pf_en:1; + uint32_t abp_en:1; + } s; + struct cvmx_pcieep_cfg034_s cn52xx; + struct cvmx_pcieep_cfg034_s cn52xxp1; + struct cvmx_pcieep_cfg034_s cn56xx; + struct cvmx_pcieep_cfg034_s cn56xxp1; +}; + +union cvmx_pcieep_cfg037 { + uint32_t u32; + struct cvmx_pcieep_cfg037_s { + uint32_t reserved_5_31:27; + uint32_t ctds:1; + uint32_t ctrs:4; + } s; + struct cvmx_pcieep_cfg037_s cn52xx; + struct cvmx_pcieep_cfg037_s cn52xxp1; + struct cvmx_pcieep_cfg037_s cn56xx; + struct cvmx_pcieep_cfg037_s cn56xxp1; +}; + +union cvmx_pcieep_cfg038 { + uint32_t u32; + struct cvmx_pcieep_cfg038_s { + uint32_t reserved_5_31:27; + uint32_t ctd:1; + uint32_t ctv:4; + } s; + struct cvmx_pcieep_cfg038_s cn52xx; + struct cvmx_pcieep_cfg038_s cn52xxp1; + struct cvmx_pcieep_cfg038_s cn56xx; + struct cvmx_pcieep_cfg038_s cn56xxp1; +}; + +union cvmx_pcieep_cfg039 { + uint32_t u32; + struct cvmx_pcieep_cfg039_s { + uint32_t reserved_0_31:32; + } s; + struct cvmx_pcieep_cfg039_s cn52xx; + struct cvmx_pcieep_cfg039_s cn52xxp1; + struct cvmx_pcieep_cfg039_s cn56xx; + struct cvmx_pcieep_cfg039_s cn56xxp1; +}; + +union cvmx_pcieep_cfg040 { + uint32_t u32; + struct cvmx_pcieep_cfg040_s { + uint32_t reserved_0_31:32; + } s; + struct cvmx_pcieep_cfg040_s cn52xx; + struct cvmx_pcieep_cfg040_s cn52xxp1; + struct cvmx_pcieep_cfg040_s cn56xx; + struct cvmx_pcieep_cfg040_s cn56xxp1; +}; + +union cvmx_pcieep_cfg041 { + uint32_t u32; + struct cvmx_pcieep_cfg041_s { + uint32_t reserved_0_31:32; + } s; + struct cvmx_pcieep_cfg041_s cn52xx; + struct cvmx_pcieep_cfg041_s cn52xxp1; + struct cvmx_pcieep_cfg041_s cn56xx; + struct cvmx_pcieep_cfg041_s cn56xxp1; +}; + +union cvmx_pcieep_cfg042 { + uint32_t u32; + struct cvmx_pcieep_cfg042_s { + uint32_t reserved_0_31:32; + } s; + struct cvmx_pcieep_cfg042_s cn52xx; + struct cvmx_pcieep_cfg042_s cn52xxp1; + struct cvmx_pcieep_cfg042_s cn56xx; + struct cvmx_pcieep_cfg042_s cn56xxp1; +}; + +union cvmx_pcieep_cfg064 { + uint32_t u32; + struct cvmx_pcieep_cfg064_s { + uint32_t nco:12; + uint32_t cv:4; + uint32_t pcieec:16; + } s; + struct cvmx_pcieep_cfg064_s cn52xx; + struct cvmx_pcieep_cfg064_s cn52xxp1; + struct cvmx_pcieep_cfg064_s cn56xx; + struct cvmx_pcieep_cfg064_s cn56xxp1; +}; + +union cvmx_pcieep_cfg065 { + uint32_t u32; + struct cvmx_pcieep_cfg065_s { + uint32_t reserved_21_31:11; + uint32_t ures:1; + uint32_t ecrces:1; + uint32_t mtlps:1; + uint32_t ros:1; + uint32_t ucs:1; + uint32_t cas:1; + uint32_t cts:1; + uint32_t fcpes:1; + uint32_t ptlps:1; + uint32_t reserved_6_11:6; + uint32_t sdes:1; + uint32_t dlpes:1; + uint32_t reserved_0_3:4; + } s; + struct cvmx_pcieep_cfg065_s cn52xx; + struct cvmx_pcieep_cfg065_s cn52xxp1; + struct cvmx_pcieep_cfg065_s cn56xx; + struct cvmx_pcieep_cfg065_s cn56xxp1; +}; + +union cvmx_pcieep_cfg066 { + uint32_t u32; + struct cvmx_pcieep_cfg066_s { + uint32_t reserved_21_31:11; + uint32_t urem:1; + uint32_t ecrcem:1; + uint32_t mtlpm:1; + uint32_t rom:1; + uint32_t ucm:1; + uint32_t cam:1; + uint32_t ctm:1; + uint32_t fcpem:1; + uint32_t ptlpm:1; + uint32_t reserved_6_11:6; + uint32_t sdem:1; + uint32_t dlpem:1; + uint32_t reserved_0_3:4; + } s; + struct cvmx_pcieep_cfg066_s cn52xx; + struct cvmx_pcieep_cfg066_s cn52xxp1; + struct cvmx_pcieep_cfg066_s cn56xx; + struct cvmx_pcieep_cfg066_s cn56xxp1; +}; + +union cvmx_pcieep_cfg067 { + uint32_t u32; + struct cvmx_pcieep_cfg067_s { + uint32_t reserved_21_31:11; + uint32_t ures:1; + uint32_t ecrces:1; + uint32_t mtlps:1; + uint32_t ros:1; + uint32_t ucs:1; + uint32_t cas:1; + uint32_t cts:1; + uint32_t fcpes:1; + uint32_t ptlps:1; + uint32_t reserved_6_11:6; + uint32_t sdes:1; + uint32_t dlpes:1; + uint32_t reserved_0_3:4; + } s; + struct cvmx_pcieep_cfg067_s cn52xx; + struct cvmx_pcieep_cfg067_s cn52xxp1; + struct cvmx_pcieep_cfg067_s cn56xx; + struct cvmx_pcieep_cfg067_s cn56xxp1; +}; + +union cvmx_pcieep_cfg068 { + uint32_t u32; + struct cvmx_pcieep_cfg068_s { + uint32_t reserved_14_31:18; + uint32_t anfes:1; + uint32_t rtts:1; + uint32_t reserved_9_11:3; + uint32_t rnrs:1; + uint32_t bdllps:1; + uint32_t btlps:1; + uint32_t reserved_1_5:5; + uint32_t res:1; + } s; + struct cvmx_pcieep_cfg068_s cn52xx; + struct cvmx_pcieep_cfg068_s cn52xxp1; + struct cvmx_pcieep_cfg068_s cn56xx; + struct cvmx_pcieep_cfg068_s cn56xxp1; +}; + +union cvmx_pcieep_cfg069 { + uint32_t u32; + struct cvmx_pcieep_cfg069_s { + uint32_t reserved_14_31:18; + uint32_t anfem:1; + uint32_t rttm:1; + uint32_t reserved_9_11:3; + uint32_t rnrm:1; + uint32_t bdllpm:1; + uint32_t btlpm:1; + uint32_t reserved_1_5:5; + uint32_t rem:1; + } s; + struct cvmx_pcieep_cfg069_s cn52xx; + struct cvmx_pcieep_cfg069_s cn52xxp1; + struct cvmx_pcieep_cfg069_s cn56xx; + struct cvmx_pcieep_cfg069_s cn56xxp1; +}; + +union cvmx_pcieep_cfg070 { + uint32_t u32; + struct cvmx_pcieep_cfg070_s { + uint32_t reserved_9_31:23; + uint32_t ce:1; + uint32_t cc:1; + uint32_t ge:1; + uint32_t gc:1; + uint32_t fep:5; + } s; + struct cvmx_pcieep_cfg070_s cn52xx; + struct cvmx_pcieep_cfg070_s cn52xxp1; + struct cvmx_pcieep_cfg070_s cn56xx; + struct cvmx_pcieep_cfg070_s cn56xxp1; +}; + +union cvmx_pcieep_cfg071 { + uint32_t u32; + struct cvmx_pcieep_cfg071_s { + uint32_t dword1:32; + } s; + struct cvmx_pcieep_cfg071_s cn52xx; + struct cvmx_pcieep_cfg071_s cn52xxp1; + struct cvmx_pcieep_cfg071_s cn56xx; + struct cvmx_pcieep_cfg071_s cn56xxp1; +}; + +union cvmx_pcieep_cfg072 { + uint32_t u32; + struct cvmx_pcieep_cfg072_s { + uint32_t dword2:32; + } s; + struct cvmx_pcieep_cfg072_s cn52xx; + struct cvmx_pcieep_cfg072_s cn52xxp1; + struct cvmx_pcieep_cfg072_s cn56xx; + struct cvmx_pcieep_cfg072_s cn56xxp1; +}; + +union cvmx_pcieep_cfg073 { + uint32_t u32; + struct cvmx_pcieep_cfg073_s { + uint32_t dword3:32; + } s; + struct cvmx_pcieep_cfg073_s cn52xx; + struct cvmx_pcieep_cfg073_s cn52xxp1; + struct cvmx_pcieep_cfg073_s cn56xx; + struct cvmx_pcieep_cfg073_s cn56xxp1; +}; + +union cvmx_pcieep_cfg074 { + uint32_t u32; + struct cvmx_pcieep_cfg074_s { + uint32_t dword4:32; + } s; + struct cvmx_pcieep_cfg074_s cn52xx; + struct cvmx_pcieep_cfg074_s cn52xxp1; + struct cvmx_pcieep_cfg074_s cn56xx; + struct cvmx_pcieep_cfg074_s cn56xxp1; +}; + +union cvmx_pcieep_cfg448 { + uint32_t u32; + struct cvmx_pcieep_cfg448_s { + uint32_t rtl:16; + uint32_t rtltl:16; + } s; + struct cvmx_pcieep_cfg448_s cn52xx; + struct cvmx_pcieep_cfg448_s cn52xxp1; + struct cvmx_pcieep_cfg448_s cn56xx; + struct cvmx_pcieep_cfg448_s cn56xxp1; +}; + +union cvmx_pcieep_cfg449 { + uint32_t u32; + struct cvmx_pcieep_cfg449_s { + uint32_t omr:32; + } s; + struct cvmx_pcieep_cfg449_s cn52xx; + struct cvmx_pcieep_cfg449_s cn52xxp1; + struct cvmx_pcieep_cfg449_s cn56xx; + struct cvmx_pcieep_cfg449_s cn56xxp1; +}; + +union cvmx_pcieep_cfg450 { + uint32_t u32; + struct cvmx_pcieep_cfg450_s { + uint32_t lpec:8; + uint32_t reserved_22_23:2; + uint32_t link_state:6; + uint32_t force_link:1; + uint32_t reserved_8_14:7; + uint32_t link_num:8; + } s; + struct cvmx_pcieep_cfg450_s cn52xx; + struct cvmx_pcieep_cfg450_s cn52xxp1; + struct cvmx_pcieep_cfg450_s cn56xx; + struct cvmx_pcieep_cfg450_s cn56xxp1; +}; + +union cvmx_pcieep_cfg451 { + uint32_t u32; + struct cvmx_pcieep_cfg451_s { + uint32_t reserved_30_31:2; + uint32_t l1el:3; + uint32_t l0el:3; + uint32_t n_fts_cc:8; + uint32_t n_fts:8; + uint32_t ack_freq:8; + } s; + struct cvmx_pcieep_cfg451_s cn52xx; + struct cvmx_pcieep_cfg451_s cn52xxp1; + struct cvmx_pcieep_cfg451_s cn56xx; + struct cvmx_pcieep_cfg451_s cn56xxp1; +}; + +union cvmx_pcieep_cfg452 { + uint32_t u32; + struct cvmx_pcieep_cfg452_s { + uint32_t reserved_26_31:6; + uint32_t eccrc:1; + uint32_t reserved_22_24:3; + uint32_t lme:6; + uint32_t reserved_8_15:8; + uint32_t flm:1; + uint32_t reserved_6_6:1; + uint32_t dllle:1; + uint32_t reserved_4_4:1; + uint32_t ra:1; + uint32_t le:1; + uint32_t sd:1; + uint32_t omr:1; + } s; + struct cvmx_pcieep_cfg452_s cn52xx; + struct cvmx_pcieep_cfg452_s cn52xxp1; + struct cvmx_pcieep_cfg452_s cn56xx; + struct cvmx_pcieep_cfg452_s cn56xxp1; +}; + +union cvmx_pcieep_cfg453 { + uint32_t u32; + struct cvmx_pcieep_cfg453_s { + uint32_t dlld:1; + uint32_t reserved_26_30:5; + uint32_t ack_nak:1; + uint32_t fcd:1; + uint32_t ilst:24; + } s; + struct cvmx_pcieep_cfg453_s cn52xx; + struct cvmx_pcieep_cfg453_s cn52xxp1; + struct cvmx_pcieep_cfg453_s cn56xx; + struct cvmx_pcieep_cfg453_s cn56xxp1; +}; + +union cvmx_pcieep_cfg454 { + uint32_t u32; + struct cvmx_pcieep_cfg454_s { + uint32_t reserved_29_31:3; + uint32_t tmfcwt:5; + uint32_t tmanlt:5; + uint32_t tmrt:5; + uint32_t reserved_11_13:3; + uint32_t nskps:3; + uint32_t reserved_4_7:4; + uint32_t ntss:4; + } s; + struct cvmx_pcieep_cfg454_s cn52xx; + struct cvmx_pcieep_cfg454_s cn52xxp1; + struct cvmx_pcieep_cfg454_s cn56xx; + struct cvmx_pcieep_cfg454_s cn56xxp1; +}; + +union cvmx_pcieep_cfg455 { + uint32_t u32; + struct cvmx_pcieep_cfg455_s { + uint32_t m_cfg0_filt:1; + uint32_t m_io_filt:1; + uint32_t msg_ctrl:1; + uint32_t m_cpl_ecrc_filt:1; + uint32_t m_ecrc_filt:1; + uint32_t m_cpl_len_err:1; + uint32_t m_cpl_attr_err:1; + uint32_t m_cpl_tc_err:1; + uint32_t m_cpl_fun_err:1; + uint32_t m_cpl_rid_err:1; + uint32_t m_cpl_tag_err:1; + uint32_t m_lk_filt:1; + uint32_t m_cfg1_filt:1; + uint32_t m_bar_match:1; + uint32_t m_pois_filt:1; + uint32_t m_fun:1; + uint32_t dfcwt:1; + uint32_t reserved_11_14:4; + uint32_t skpiv:11; + } s; + struct cvmx_pcieep_cfg455_s cn52xx; + struct cvmx_pcieep_cfg455_s cn52xxp1; + struct cvmx_pcieep_cfg455_s cn56xx; + struct cvmx_pcieep_cfg455_s cn56xxp1; +}; + +union cvmx_pcieep_cfg456 { + uint32_t u32; + struct cvmx_pcieep_cfg456_s { + uint32_t reserved_2_31:30; + uint32_t m_vend1_drp:1; + uint32_t m_vend0_drp:1; + } s; + struct cvmx_pcieep_cfg456_s cn52xx; + struct cvmx_pcieep_cfg456_s cn52xxp1; + struct cvmx_pcieep_cfg456_s cn56xx; + struct cvmx_pcieep_cfg456_s cn56xxp1; +}; + +union cvmx_pcieep_cfg458 { + uint32_t u32; + struct cvmx_pcieep_cfg458_s { + uint32_t dbg_info_l32:32; + } s; + struct cvmx_pcieep_cfg458_s cn52xx; + struct cvmx_pcieep_cfg458_s cn52xxp1; + struct cvmx_pcieep_cfg458_s cn56xx; + struct cvmx_pcieep_cfg458_s cn56xxp1; +}; + +union cvmx_pcieep_cfg459 { + uint32_t u32; + struct cvmx_pcieep_cfg459_s { + uint32_t dbg_info_u32:32; + } s; + struct cvmx_pcieep_cfg459_s cn52xx; + struct cvmx_pcieep_cfg459_s cn52xxp1; + struct cvmx_pcieep_cfg459_s cn56xx; + struct cvmx_pcieep_cfg459_s cn56xxp1; +}; + +union cvmx_pcieep_cfg460 { + uint32_t u32; + struct cvmx_pcieep_cfg460_s { + uint32_t reserved_20_31:12; + uint32_t tphfcc:8; + uint32_t tpdfcc:12; + } s; + struct cvmx_pcieep_cfg460_s cn52xx; + struct cvmx_pcieep_cfg460_s cn52xxp1; + struct cvmx_pcieep_cfg460_s cn56xx; + struct cvmx_pcieep_cfg460_s cn56xxp1; +}; + +union cvmx_pcieep_cfg461 { + uint32_t u32; + struct cvmx_pcieep_cfg461_s { + uint32_t reserved_20_31:12; + uint32_t tchfcc:8; + uint32_t tcdfcc:12; + } s; + struct cvmx_pcieep_cfg461_s cn52xx; + struct cvmx_pcieep_cfg461_s cn52xxp1; + struct cvmx_pcieep_cfg461_s cn56xx; + struct cvmx_pcieep_cfg461_s cn56xxp1; +}; + +union cvmx_pcieep_cfg462 { + uint32_t u32; + struct cvmx_pcieep_cfg462_s { + uint32_t reserved_20_31:12; + uint32_t tchfcc:8; + uint32_t tcdfcc:12; + } s; + struct cvmx_pcieep_cfg462_s cn52xx; + struct cvmx_pcieep_cfg462_s cn52xxp1; + struct cvmx_pcieep_cfg462_s cn56xx; + struct cvmx_pcieep_cfg462_s cn56xxp1; +}; + +union cvmx_pcieep_cfg463 { + uint32_t u32; + struct cvmx_pcieep_cfg463_s { + uint32_t reserved_3_31:29; + uint32_t rqne:1; + uint32_t trbne:1; + uint32_t rtlpfccnr:1; + } s; + struct cvmx_pcieep_cfg463_s cn52xx; + struct cvmx_pcieep_cfg463_s cn52xxp1; + struct cvmx_pcieep_cfg463_s cn56xx; + struct cvmx_pcieep_cfg463_s cn56xxp1; +}; + +union cvmx_pcieep_cfg464 { + uint32_t u32; + struct cvmx_pcieep_cfg464_s { + uint32_t wrr_vc3:8; + uint32_t wrr_vc2:8; + uint32_t wrr_vc1:8; + uint32_t wrr_vc0:8; + } s; + struct cvmx_pcieep_cfg464_s cn52xx; + struct cvmx_pcieep_cfg464_s cn52xxp1; + struct cvmx_pcieep_cfg464_s cn56xx; + struct cvmx_pcieep_cfg464_s cn56xxp1; +}; + +union cvmx_pcieep_cfg465 { + uint32_t u32; + struct cvmx_pcieep_cfg465_s { + uint32_t wrr_vc7:8; + uint32_t wrr_vc6:8; + uint32_t wrr_vc5:8; + uint32_t wrr_vc4:8; + } s; + struct cvmx_pcieep_cfg465_s cn52xx; + struct cvmx_pcieep_cfg465_s cn52xxp1; + struct cvmx_pcieep_cfg465_s cn56xx; + struct cvmx_pcieep_cfg465_s cn56xxp1; +}; + +union cvmx_pcieep_cfg466 { + uint32_t u32; + struct cvmx_pcieep_cfg466_s { + uint32_t rx_queue_order:1; + uint32_t type_ordering:1; + uint32_t reserved_24_29:6; + uint32_t queue_mode:3; + uint32_t reserved_20_20:1; + uint32_t header_credits:8; + uint32_t data_credits:12; + } s; + struct cvmx_pcieep_cfg466_s cn52xx; + struct cvmx_pcieep_cfg466_s cn52xxp1; + struct cvmx_pcieep_cfg466_s cn56xx; + struct cvmx_pcieep_cfg466_s cn56xxp1; +}; + +union cvmx_pcieep_cfg467 { + uint32_t u32; + struct cvmx_pcieep_cfg467_s { + uint32_t reserved_24_31:8; + uint32_t queue_mode:3; + uint32_t reserved_20_20:1; + uint32_t header_credits:8; + uint32_t data_credits:12; + } s; + struct cvmx_pcieep_cfg467_s cn52xx; + struct cvmx_pcieep_cfg467_s cn52xxp1; + struct cvmx_pcieep_cfg467_s cn56xx; + struct cvmx_pcieep_cfg467_s cn56xxp1; +}; + +union cvmx_pcieep_cfg468 { + uint32_t u32; + struct cvmx_pcieep_cfg468_s { + uint32_t reserved_24_31:8; + uint32_t queue_mode:3; + uint32_t reserved_20_20:1; + uint32_t header_credits:8; + uint32_t data_credits:12; + } s; + struct cvmx_pcieep_cfg468_s cn52xx; + struct cvmx_pcieep_cfg468_s cn52xxp1; + struct cvmx_pcieep_cfg468_s cn56xx; + struct cvmx_pcieep_cfg468_s cn56xxp1; +}; + +union cvmx_pcieep_cfg490 { + uint32_t u32; + struct cvmx_pcieep_cfg490_s { + uint32_t reserved_26_31:6; + uint32_t header_depth:10; + uint32_t reserved_14_15:2; + uint32_t data_depth:14; + } s; + struct cvmx_pcieep_cfg490_s cn52xx; + struct cvmx_pcieep_cfg490_s cn52xxp1; + struct cvmx_pcieep_cfg490_s cn56xx; + struct cvmx_pcieep_cfg490_s cn56xxp1; +}; + +union cvmx_pcieep_cfg491 { + uint32_t u32; + struct cvmx_pcieep_cfg491_s { + uint32_t reserved_26_31:6; + uint32_t header_depth:10; + uint32_t reserved_14_15:2; + uint32_t data_depth:14; + } s; + struct cvmx_pcieep_cfg491_s cn52xx; + struct cvmx_pcieep_cfg491_s cn52xxp1; + struct cvmx_pcieep_cfg491_s cn56xx; + struct cvmx_pcieep_cfg491_s cn56xxp1; +}; + +union cvmx_pcieep_cfg492 { + uint32_t u32; + struct cvmx_pcieep_cfg492_s { + uint32_t reserved_26_31:6; + uint32_t header_depth:10; + uint32_t reserved_14_15:2; + uint32_t data_depth:14; + } s; + struct cvmx_pcieep_cfg492_s cn52xx; + struct cvmx_pcieep_cfg492_s cn52xxp1; + struct cvmx_pcieep_cfg492_s cn56xx; + struct cvmx_pcieep_cfg492_s cn56xxp1; +}; + +union cvmx_pcieep_cfg516 { + uint32_t u32; + struct cvmx_pcieep_cfg516_s { + uint32_t phy_stat:32; + } s; + struct cvmx_pcieep_cfg516_s cn52xx; + struct cvmx_pcieep_cfg516_s cn52xxp1; + struct cvmx_pcieep_cfg516_s cn56xx; + struct cvmx_pcieep_cfg516_s cn56xxp1; +}; + +union cvmx_pcieep_cfg517 { + uint32_t u32; + struct cvmx_pcieep_cfg517_s { + uint32_t phy_ctrl:32; + } s; + struct cvmx_pcieep_cfg517_s cn52xx; + struct cvmx_pcieep_cfg517_s cn52xxp1; + struct cvmx_pcieep_cfg517_s cn56xx; + struct cvmx_pcieep_cfg517_s cn56xxp1; +}; + +#endif diff --git a/arch/mips/include/asm/octeon/cvmx-pciercx-defs.h b/arch/mips/include/asm/octeon/cvmx-pciercx-defs.h new file mode 100644 index 0000000..75574c9 --- /dev/null +++ b/arch/mips/include/asm/octeon/cvmx-pciercx-defs.h @@ -0,0 +1,1397 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +#ifndef __CVMX_PCIERCX_DEFS_H__ +#define __CVMX_PCIERCX_DEFS_H__ + +#define CVMX_PCIERCX_CFG000(offset) \ + (0x0000000000000000ull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG001(offset) \ + (0x0000000000000004ull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG002(offset) \ + (0x0000000000000008ull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG003(offset) \ + (0x000000000000000Cull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG004(offset) \ + (0x0000000000000010ull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG005(offset) \ + (0x0000000000000014ull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG006(offset) \ + (0x0000000000000018ull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG007(offset) \ + (0x000000000000001Cull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG008(offset) \ + (0x0000000000000020ull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG009(offset) \ + (0x0000000000000024ull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG010(offset) \ + (0x0000000000000028ull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG011(offset) \ + (0x000000000000002Cull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG012(offset) \ + (0x0000000000000030ull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG013(offset) \ + (0x0000000000000034ull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG014(offset) \ + (0x0000000000000038ull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG015(offset) \ + (0x000000000000003Cull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG016(offset) \ + (0x0000000000000040ull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG017(offset) \ + (0x0000000000000044ull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG020(offset) \ + (0x0000000000000050ull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG021(offset) \ + (0x0000000000000054ull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG022(offset) \ + (0x0000000000000058ull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG023(offset) \ + (0x000000000000005Cull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG028(offset) \ + (0x0000000000000070ull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG029(offset) \ + (0x0000000000000074ull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG030(offset) \ + (0x0000000000000078ull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG031(offset) \ + (0x000000000000007Cull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG032(offset) \ + (0x0000000000000080ull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG033(offset) \ + (0x0000000000000084ull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG034(offset) \ + (0x0000000000000088ull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG035(offset) \ + (0x000000000000008Cull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG036(offset) \ + (0x0000000000000090ull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG037(offset) \ + (0x0000000000000094ull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG038(offset) \ + (0x0000000000000098ull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG039(offset) \ + (0x000000000000009Cull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG040(offset) \ + (0x00000000000000A0ull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG041(offset) \ + (0x00000000000000A4ull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG042(offset) \ + (0x00000000000000A8ull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG064(offset) \ + (0x0000000000000100ull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG065(offset) \ + (0x0000000000000104ull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG066(offset) \ + (0x0000000000000108ull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG067(offset) \ + (0x000000000000010Cull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG068(offset) \ + (0x0000000000000110ull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG069(offset) \ + (0x0000000000000114ull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG070(offset) \ + (0x0000000000000118ull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG071(offset) \ + (0x000000000000011Cull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG072(offset) \ + (0x0000000000000120ull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG073(offset) \ + (0x0000000000000124ull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG074(offset) \ + (0x0000000000000128ull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG075(offset) \ + (0x000000000000012Cull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG076(offset) \ + (0x0000000000000130ull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG077(offset) \ + (0x0000000000000134ull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG448(offset) \ + (0x0000000000000700ull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG449(offset) \ + (0x0000000000000704ull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG450(offset) \ + (0x0000000000000708ull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG451(offset) \ + (0x000000000000070Cull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG452(offset) \ + (0x0000000000000710ull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG453(offset) \ + (0x0000000000000714ull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG454(offset) \ + (0x0000000000000718ull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG455(offset) \ + (0x000000000000071Cull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG456(offset) \ + (0x0000000000000720ull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG458(offset) \ + (0x0000000000000728ull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG459(offset) \ + (0x000000000000072Cull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG460(offset) \ + (0x0000000000000730ull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG461(offset) \ + (0x0000000000000734ull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG462(offset) \ + (0x0000000000000738ull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG463(offset) \ + (0x000000000000073Cull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG464(offset) \ + (0x0000000000000740ull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG465(offset) \ + (0x0000000000000744ull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG466(offset) \ + (0x0000000000000748ull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG467(offset) \ + (0x000000000000074Cull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG468(offset) \ + (0x0000000000000750ull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG490(offset) \ + (0x00000000000007A8ull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG491(offset) \ + (0x00000000000007ACull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG492(offset) \ + (0x00000000000007B0ull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG516(offset) \ + (0x0000000000000810ull + (((offset) & 1) * 0)) +#define CVMX_PCIERCX_CFG517(offset) \ + (0x0000000000000814ull + (((offset) & 1) * 0)) + +union cvmx_pciercx_cfg000 { + uint32_t u32; + struct cvmx_pciercx_cfg000_s { + uint32_t devid:16; + uint32_t vendid:16; + } s; + struct cvmx_pciercx_cfg000_s cn52xx; + struct cvmx_pciercx_cfg000_s cn52xxp1; + struct cvmx_pciercx_cfg000_s cn56xx; + struct cvmx_pciercx_cfg000_s cn56xxp1; +}; + +union cvmx_pciercx_cfg001 { + uint32_t u32; + struct cvmx_pciercx_cfg001_s { + uint32_t dpe:1; + uint32_t sse:1; + uint32_t rma:1; + uint32_t rta:1; + uint32_t sta:1; + uint32_t devt:2; + uint32_t mdpe:1; + uint32_t fbb:1; + uint32_t reserved_22_22:1; + uint32_t m66:1; + uint32_t cl:1; + uint32_t i_stat:1; + uint32_t reserved_11_18:8; + uint32_t i_dis:1; + uint32_t fbbe:1; + uint32_t see:1; + uint32_t ids_wcc:1; + uint32_t per:1; + uint32_t vps:1; + uint32_t mwice:1; + uint32_t scse:1; + uint32_t me:1; + uint32_t msae:1; + uint32_t isae:1; + } s; + struct cvmx_pciercx_cfg001_s cn52xx; + struct cvmx_pciercx_cfg001_s cn52xxp1; + struct cvmx_pciercx_cfg001_s cn56xx; + struct cvmx_pciercx_cfg001_s cn56xxp1; +}; + +union cvmx_pciercx_cfg002 { + uint32_t u32; + struct cvmx_pciercx_cfg002_s { + uint32_t bcc:8; + uint32_t sc:8; + uint32_t pi:8; + uint32_t rid:8; + } s; + struct cvmx_pciercx_cfg002_s cn52xx; + struct cvmx_pciercx_cfg002_s cn52xxp1; + struct cvmx_pciercx_cfg002_s cn56xx; + struct cvmx_pciercx_cfg002_s cn56xxp1; +}; + +union cvmx_pciercx_cfg003 { + uint32_t u32; + struct cvmx_pciercx_cfg003_s { + uint32_t bist:8; + uint32_t mfd:1; + uint32_t chf:7; + uint32_t lt:8; + uint32_t cls:8; + } s; + struct cvmx_pciercx_cfg003_s cn52xx; + struct cvmx_pciercx_cfg003_s cn52xxp1; + struct cvmx_pciercx_cfg003_s cn56xx; + struct cvmx_pciercx_cfg003_s cn56xxp1; +}; + +union cvmx_pciercx_cfg004 { + uint32_t u32; + struct cvmx_pciercx_cfg004_s { + uint32_t reserved_0_31:32; + } s; + struct cvmx_pciercx_cfg004_s cn52xx; + struct cvmx_pciercx_cfg004_s cn52xxp1; + struct cvmx_pciercx_cfg004_s cn56xx; + struct cvmx_pciercx_cfg004_s cn56xxp1; +}; + +union cvmx_pciercx_cfg005 { + uint32_t u32; + struct cvmx_pciercx_cfg005_s { + uint32_t reserved_0_31:32; + } s; + struct cvmx_pciercx_cfg005_s cn52xx; + struct cvmx_pciercx_cfg005_s cn52xxp1; + struct cvmx_pciercx_cfg005_s cn56xx; + struct cvmx_pciercx_cfg005_s cn56xxp1; +}; + +union cvmx_pciercx_cfg006 { + uint32_t u32; + struct cvmx_pciercx_cfg006_s { + uint32_t slt:8; + uint32_t subbnum:8; + uint32_t sbnum:8; + uint32_t pbnum:8; + } s; + struct cvmx_pciercx_cfg006_s cn52xx; + struct cvmx_pciercx_cfg006_s cn52xxp1; + struct cvmx_pciercx_cfg006_s cn56xx; + struct cvmx_pciercx_cfg006_s cn56xxp1; +}; + +union cvmx_pciercx_cfg007 { + uint32_t u32; + struct cvmx_pciercx_cfg007_s { + uint32_t dpe:1; + uint32_t sse:1; + uint32_t rma:1; + uint32_t rta:1; + uint32_t sta:1; + uint32_t devt:2; + uint32_t mdpe:1; + uint32_t fbb:1; + uint32_t reserved_22_22:1; + uint32_t m66:1; + uint32_t reserved_16_20:5; + uint32_t lio_limi:4; + uint32_t reserved_9_11:3; + uint32_t io32b:1; + uint32_t lio_base:4; + uint32_t reserved_1_3:3; + uint32_t io32a:1; + } s; + struct cvmx_pciercx_cfg007_s cn52xx; + struct cvmx_pciercx_cfg007_s cn52xxp1; + struct cvmx_pciercx_cfg007_s cn56xx; + struct cvmx_pciercx_cfg007_s cn56xxp1; +}; + +union cvmx_pciercx_cfg008 { + uint32_t u32; + struct cvmx_pciercx_cfg008_s { + uint32_t ml_addr:12; + uint32_t reserved_16_19:4; + uint32_t mb_addr:12; + uint32_t reserved_0_3:4; + } s; + struct cvmx_pciercx_cfg008_s cn52xx; + struct cvmx_pciercx_cfg008_s cn52xxp1; + struct cvmx_pciercx_cfg008_s cn56xx; + struct cvmx_pciercx_cfg008_s cn56xxp1; +}; + +union cvmx_pciercx_cfg009 { + uint32_t u32; + struct cvmx_pciercx_cfg009_s { + uint32_t lmem_limit:12; + uint32_t reserved_17_19:3; + uint32_t mem64b:1; + uint32_t lmem_base:12; + uint32_t reserved_1_3:3; + uint32_t mem64a:1; + } s; + struct cvmx_pciercx_cfg009_s cn52xx; + struct cvmx_pciercx_cfg009_s cn52xxp1; + struct cvmx_pciercx_cfg009_s cn56xx; + struct cvmx_pciercx_cfg009_s cn56xxp1; +}; + +union cvmx_pciercx_cfg010 { + uint32_t u32; + struct cvmx_pciercx_cfg010_s { + uint32_t umem_base:32; + } s; + struct cvmx_pciercx_cfg010_s cn52xx; + struct cvmx_pciercx_cfg010_s cn52xxp1; + struct cvmx_pciercx_cfg010_s cn56xx; + struct cvmx_pciercx_cfg010_s cn56xxp1; +}; + +union cvmx_pciercx_cfg011 { + uint32_t u32; + struct cvmx_pciercx_cfg011_s { + uint32_t umem_limit:32; + } s; + struct cvmx_pciercx_cfg011_s cn52xx; + struct cvmx_pciercx_cfg011_s cn52xxp1; + struct cvmx_pciercx_cfg011_s cn56xx; + struct cvmx_pciercx_cfg011_s cn56xxp1; +}; + +union cvmx_pciercx_cfg012 { + uint32_t u32; + struct cvmx_pciercx_cfg012_s { + uint32_t uio_limit:16; + uint32_t uio_base:16; + } s; + struct cvmx_pciercx_cfg012_s cn52xx; + struct cvmx_pciercx_cfg012_s cn52xxp1; + struct cvmx_pciercx_cfg012_s cn56xx; + struct cvmx_pciercx_cfg012_s cn56xxp1; +}; + +union cvmx_pciercx_cfg013 { + uint32_t u32; + struct cvmx_pciercx_cfg013_s { + uint32_t reserved_8_31:24; + uint32_t cp:8; + } s; + struct cvmx_pciercx_cfg013_s cn52xx; + struct cvmx_pciercx_cfg013_s cn52xxp1; + struct cvmx_pciercx_cfg013_s cn56xx; + struct cvmx_pciercx_cfg013_s cn56xxp1; +}; + +union cvmx_pciercx_cfg014 { + uint32_t u32; + struct cvmx_pciercx_cfg014_s { + uint32_t reserved_0_31:32; + } s; + struct cvmx_pciercx_cfg014_s cn52xx; + struct cvmx_pciercx_cfg014_s cn52xxp1; + struct cvmx_pciercx_cfg014_s cn56xx; + struct cvmx_pciercx_cfg014_s cn56xxp1; +}; + +union cvmx_pciercx_cfg015 { + uint32_t u32; + struct cvmx_pciercx_cfg015_s { + uint32_t reserved_28_31:4; + uint32_t dtsees:1; + uint32_t dts:1; + uint32_t sdt:1; + uint32_t pdt:1; + uint32_t fbbe:1; + uint32_t sbrst:1; + uint32_t mam:1; + uint32_t vga16d:1; + uint32_t vgae:1; + uint32_t isae:1; + uint32_t see:1; + uint32_t pere:1; + uint32_t inta:8; + uint32_t il:8; + } s; + struct cvmx_pciercx_cfg015_s cn52xx; + struct cvmx_pciercx_cfg015_s cn52xxp1; + struct cvmx_pciercx_cfg015_s cn56xx; + struct cvmx_pciercx_cfg015_s cn56xxp1; +}; + +union cvmx_pciercx_cfg016 { + uint32_t u32; + struct cvmx_pciercx_cfg016_s { + uint32_t pmes:5; + uint32_t d2s:1; + uint32_t d1s:1; + uint32_t auxc:3; + uint32_t dsi:1; + uint32_t reserved_20_20:1; + uint32_t pme_clock:1; + uint32_t pmsv:3; + uint32_t ncp:8; + uint32_t pmcid:8; + } s; + struct cvmx_pciercx_cfg016_s cn52xx; + struct cvmx_pciercx_cfg016_s cn52xxp1; + struct cvmx_pciercx_cfg016_s cn56xx; + struct cvmx_pciercx_cfg016_s cn56xxp1; +}; + +union cvmx_pciercx_cfg017 { + uint32_t u32; + struct cvmx_pciercx_cfg017_s { + uint32_t pmdia:8; + uint32_t bpccee:1; + uint32_t bd3h:1; + uint32_t reserved_16_21:6; + uint32_t pmess:1; + uint32_t pmedsia:2; + uint32_t pmds:4; + uint32_t pmeens:1; + uint32_t reserved_4_7:4; + uint32_t nsr:1; + uint32_t reserved_2_2:1; + uint32_t ps:2; + } s; + struct cvmx_pciercx_cfg017_s cn52xx; + struct cvmx_pciercx_cfg017_s cn52xxp1; + struct cvmx_pciercx_cfg017_s cn56xx; + struct cvmx_pciercx_cfg017_s cn56xxp1; +}; + +union cvmx_pciercx_cfg020 { + uint32_t u32; + struct cvmx_pciercx_cfg020_s { + uint32_t reserved_24_31:8; + uint32_t m64:1; + uint32_t mme:3; + uint32_t mmc:3; + uint32_t msien:1; + uint32_t ncp:8; + uint32_t msicid:8; + } s; + struct cvmx_pciercx_cfg020_s cn52xx; + struct cvmx_pciercx_cfg020_s cn52xxp1; + struct cvmx_pciercx_cfg020_s cn56xx; + struct cvmx_pciercx_cfg020_s cn56xxp1; +}; + +union cvmx_pciercx_cfg021 { + uint32_t u32; + struct cvmx_pciercx_cfg021_s { + uint32_t lmsi:30; + uint32_t reserved_0_1:2; + } s; + struct cvmx_pciercx_cfg021_s cn52xx; + struct cvmx_pciercx_cfg021_s cn52xxp1; + struct cvmx_pciercx_cfg021_s cn56xx; + struct cvmx_pciercx_cfg021_s cn56xxp1; +}; + +union cvmx_pciercx_cfg022 { + uint32_t u32; + struct cvmx_pciercx_cfg022_s { + uint32_t umsi:32; + } s; + struct cvmx_pciercx_cfg022_s cn52xx; + struct cvmx_pciercx_cfg022_s cn52xxp1; + struct cvmx_pciercx_cfg022_s cn56xx; + struct cvmx_pciercx_cfg022_s cn56xxp1; +}; + +union cvmx_pciercx_cfg023 { + uint32_t u32; + struct cvmx_pciercx_cfg023_s { + uint32_t reserved_16_31:16; + uint32_t msimd:16; + } s; + struct cvmx_pciercx_cfg023_s cn52xx; + struct cvmx_pciercx_cfg023_s cn52xxp1; + struct cvmx_pciercx_cfg023_s cn56xx; + struct cvmx_pciercx_cfg023_s cn56xxp1; +}; + +union cvmx_pciercx_cfg028 { + uint32_t u32; + struct cvmx_pciercx_cfg028_s { + uint32_t reserved_30_31:2; + uint32_t imn:5; + uint32_t si:1; + uint32_t dpt:4; + uint32_t pciecv:4; + uint32_t ncp:8; + uint32_t pcieid:8; + } s; + struct cvmx_pciercx_cfg028_s cn52xx; + struct cvmx_pciercx_cfg028_s cn52xxp1; + struct cvmx_pciercx_cfg028_s cn56xx; + struct cvmx_pciercx_cfg028_s cn56xxp1; +}; + +union cvmx_pciercx_cfg029 { + uint32_t u32; + struct cvmx_pciercx_cfg029_s { + uint32_t reserved_28_31:4; + uint32_t cspls:2; + uint32_t csplv:8; + uint32_t reserved_16_17:2; + uint32_t rber:1; + uint32_t reserved_12_14:3; + uint32_t el1al:3; + uint32_t el0al:3; + uint32_t etfs:1; + uint32_t pfs:2; + uint32_t mpss:3; + } s; + struct cvmx_pciercx_cfg029_s cn52xx; + struct cvmx_pciercx_cfg029_s cn52xxp1; + struct cvmx_pciercx_cfg029_s cn56xx; + struct cvmx_pciercx_cfg029_s cn56xxp1; +}; + +union cvmx_pciercx_cfg030 { + uint32_t u32; + struct cvmx_pciercx_cfg030_s { + uint32_t reserved_22_31:10; + uint32_t tp:1; + uint32_t ap_d:1; + uint32_t ur_d:1; + uint32_t fe_d:1; + uint32_t nfe_d:1; + uint32_t ce_d:1; + uint32_t reserved_15_15:1; + uint32_t mrrs:3; + uint32_t ns_en:1; + uint32_t ap_en:1; + uint32_t pf_en:1; + uint32_t etf_en:1; + uint32_t mps:3; + uint32_t ro_en:1; + uint32_t ur_en:1; + uint32_t fe_en:1; + uint32_t nfe_en:1; + uint32_t ce_en:1; + } s; + struct cvmx_pciercx_cfg030_s cn52xx; + struct cvmx_pciercx_cfg030_s cn52xxp1; + struct cvmx_pciercx_cfg030_s cn56xx; + struct cvmx_pciercx_cfg030_s cn56xxp1; +}; + +union cvmx_pciercx_cfg031 { + uint32_t u32; + struct cvmx_pciercx_cfg031_s { + uint32_t pnum:8; + uint32_t reserved_22_23:2; + uint32_t lbnc:1; + uint32_t dllarc:1; + uint32_t sderc:1; + uint32_t cpm:1; + uint32_t l1el:3; + uint32_t l0el:3; + uint32_t aslpms:2; + uint32_t mlw:6; + uint32_t mls:4; + } s; + struct cvmx_pciercx_cfg031_s cn52xx; + struct cvmx_pciercx_cfg031_s cn52xxp1; + struct cvmx_pciercx_cfg031_s cn56xx; + struct cvmx_pciercx_cfg031_s cn56xxp1; +}; + +union cvmx_pciercx_cfg032 { + uint32_t u32; + struct cvmx_pciercx_cfg032_s { + uint32_t lab:1; + uint32_t lbm:1; + uint32_t dlla:1; + uint32_t scc:1; + uint32_t lt:1; + uint32_t reserved_26_26:1; + uint32_t nlw:6; + uint32_t ls:4; + uint32_t reserved_12_15:4; + uint32_t lab_int_enb:1; + uint32_t lbm_int_enb:1; + uint32_t hawd:1; + uint32_t ecpm:1; + uint32_t es:1; + uint32_t ccc:1; + uint32_t rl:1; + uint32_t ld:1; + uint32_t rcb:1; + uint32_t reserved_2_2:1; + uint32_t aslpc:2; + } s; + struct cvmx_pciercx_cfg032_s cn52xx; + struct cvmx_pciercx_cfg032_s cn52xxp1; + struct cvmx_pciercx_cfg032_s cn56xx; + struct cvmx_pciercx_cfg032_s cn56xxp1; +}; + +union cvmx_pciercx_cfg033 { + uint32_t u32; + struct cvmx_pciercx_cfg033_s { + uint32_t ps_num:13; + uint32_t nccs:1; + uint32_t emip:1; + uint32_t sp_ls:2; + uint32_t sp_lv:8; + uint32_t hp_c:1; + uint32_t hp_s:1; + uint32_t pip:1; + uint32_t aip:1; + uint32_t mrlsp:1; + uint32_t pcp:1; + uint32_t abp:1; + } s; + struct cvmx_pciercx_cfg033_s cn52xx; + struct cvmx_pciercx_cfg033_s cn52xxp1; + struct cvmx_pciercx_cfg033_s cn56xx; + struct cvmx_pciercx_cfg033_s cn56xxp1; +}; + +union cvmx_pciercx_cfg034 { + uint32_t u32; + struct cvmx_pciercx_cfg034_s { + uint32_t reserved_25_31:7; + uint32_t dlls_c:1; + uint32_t emis:1; + uint32_t pds:1; + uint32_t mrlss:1; + uint32_t ccint_d:1; + uint32_t pd_c:1; + uint32_t mrls_c:1; + uint32_t pf_d:1; + uint32_t abp_d:1; + uint32_t reserved_13_15:3; + uint32_t dlls_en:1; + uint32_t emic:1; + uint32_t pcc:1; + uint32_t pic:2; + uint32_t aic:2; + uint32_t hpint_en:1; + uint32_t ccint_en:1; + uint32_t pd_en:1; + uint32_t mrls_en:1; + uint32_t pf_en:1; + uint32_t abp_en:1; + } s; + struct cvmx_pciercx_cfg034_s cn52xx; + struct cvmx_pciercx_cfg034_s cn52xxp1; + struct cvmx_pciercx_cfg034_s cn56xx; + struct cvmx_pciercx_cfg034_s cn56xxp1; +}; + +union cvmx_pciercx_cfg035 { + uint32_t u32; + struct cvmx_pciercx_cfg035_s { + uint32_t reserved_17_31:15; + uint32_t crssv:1; + uint32_t reserved_5_15:11; + uint32_t crssve:1; + uint32_t pmeie:1; + uint32_t sefee:1; + uint32_t senfee:1; + uint32_t secee:1; + } s; + struct cvmx_pciercx_cfg035_s cn52xx; + struct cvmx_pciercx_cfg035_s cn52xxp1; + struct cvmx_pciercx_cfg035_s cn56xx; + struct cvmx_pciercx_cfg035_s cn56xxp1; +}; + +union cvmx_pciercx_cfg036 { + uint32_t u32; + struct cvmx_pciercx_cfg036_s { + uint32_t reserved_18_31:14; + uint32_t pme_pend:1; + uint32_t pme_stat:1; + uint32_t pme_rid:16; + } s; + struct cvmx_pciercx_cfg036_s cn52xx; + struct cvmx_pciercx_cfg036_s cn52xxp1; + struct cvmx_pciercx_cfg036_s cn56xx; + struct cvmx_pciercx_cfg036_s cn56xxp1; +}; + +union cvmx_pciercx_cfg037 { + uint32_t u32; + struct cvmx_pciercx_cfg037_s { + uint32_t reserved_5_31:27; + uint32_t ctds:1; + uint32_t ctrs:4; + } s; + struct cvmx_pciercx_cfg037_s cn52xx; + struct cvmx_pciercx_cfg037_s cn52xxp1; + struct cvmx_pciercx_cfg037_s cn56xx; + struct cvmx_pciercx_cfg037_s cn56xxp1; +}; + +union cvmx_pciercx_cfg038 { + uint32_t u32; + struct cvmx_pciercx_cfg038_s { + uint32_t reserved_5_31:27; + uint32_t ctd:1; + uint32_t ctv:4; + } s; + struct cvmx_pciercx_cfg038_s cn52xx; + struct cvmx_pciercx_cfg038_s cn52xxp1; + struct cvmx_pciercx_cfg038_s cn56xx; + struct cvmx_pciercx_cfg038_s cn56xxp1; +}; + +union cvmx_pciercx_cfg039 { + uint32_t u32; + struct cvmx_pciercx_cfg039_s { + uint32_t reserved_0_31:32; + } s; + struct cvmx_pciercx_cfg039_s cn52xx; + struct cvmx_pciercx_cfg039_s cn52xxp1; + struct cvmx_pciercx_cfg039_s cn56xx; + struct cvmx_pciercx_cfg039_s cn56xxp1; +}; + +union cvmx_pciercx_cfg040 { + uint32_t u32; + struct cvmx_pciercx_cfg040_s { + uint32_t reserved_0_31:32; + } s; + struct cvmx_pciercx_cfg040_s cn52xx; + struct cvmx_pciercx_cfg040_s cn52xxp1; + struct cvmx_pciercx_cfg040_s cn56xx; + struct cvmx_pciercx_cfg040_s cn56xxp1; +}; + +union cvmx_pciercx_cfg041 { + uint32_t u32; + struct cvmx_pciercx_cfg041_s { + uint32_t reserved_0_31:32; + } s; + struct cvmx_pciercx_cfg041_s cn52xx; + struct cvmx_pciercx_cfg041_s cn52xxp1; + struct cvmx_pciercx_cfg041_s cn56xx; + struct cvmx_pciercx_cfg041_s cn56xxp1; +}; + +union cvmx_pciercx_cfg042 { + uint32_t u32; + struct cvmx_pciercx_cfg042_s { + uint32_t reserved_0_31:32; + } s; + struct cvmx_pciercx_cfg042_s cn52xx; + struct cvmx_pciercx_cfg042_s cn52xxp1; + struct cvmx_pciercx_cfg042_s cn56xx; + struct cvmx_pciercx_cfg042_s cn56xxp1; +}; + +union cvmx_pciercx_cfg064 { + uint32_t u32; + struct cvmx_pciercx_cfg064_s { + uint32_t nco:12; + uint32_t cv:4; + uint32_t pcieec:16; + } s; + struct cvmx_pciercx_cfg064_s cn52xx; + struct cvmx_pciercx_cfg064_s cn52xxp1; + struct cvmx_pciercx_cfg064_s cn56xx; + struct cvmx_pciercx_cfg064_s cn56xxp1; +}; + +union cvmx_pciercx_cfg065 { + uint32_t u32; + struct cvmx_pciercx_cfg065_s { + uint32_t reserved_21_31:11; + uint32_t ures:1; + uint32_t ecrces:1; + uint32_t mtlps:1; + uint32_t ros:1; + uint32_t ucs:1; + uint32_t cas:1; + uint32_t cts:1; + uint32_t fcpes:1; + uint32_t ptlps:1; + uint32_t reserved_6_11:6; + uint32_t sdes:1; + uint32_t dlpes:1; + uint32_t reserved_0_3:4; + } s; + struct cvmx_pciercx_cfg065_s cn52xx; + struct cvmx_pciercx_cfg065_s cn52xxp1; + struct cvmx_pciercx_cfg065_s cn56xx; + struct cvmx_pciercx_cfg065_s cn56xxp1; +}; + +union cvmx_pciercx_cfg066 { + uint32_t u32; + struct cvmx_pciercx_cfg066_s { + uint32_t reserved_21_31:11; + uint32_t urem:1; + uint32_t ecrcem:1; + uint32_t mtlpm:1; + uint32_t rom:1; + uint32_t ucm:1; + uint32_t cam:1; + uint32_t ctm:1; + uint32_t fcpem:1; + uint32_t ptlpm:1; + uint32_t reserved_6_11:6; + uint32_t sdem:1; + uint32_t dlpem:1; + uint32_t reserved_0_3:4; + } s; + struct cvmx_pciercx_cfg066_s cn52xx; + struct cvmx_pciercx_cfg066_s cn52xxp1; + struct cvmx_pciercx_cfg066_s cn56xx; + struct cvmx_pciercx_cfg066_s cn56xxp1; +}; + +union cvmx_pciercx_cfg067 { + uint32_t u32; + struct cvmx_pciercx_cfg067_s { + uint32_t reserved_21_31:11; + uint32_t ures:1; + uint32_t ecrces:1; + uint32_t mtlps:1; + uint32_t ros:1; + uint32_t ucs:1; + uint32_t cas:1; + uint32_t cts:1; + uint32_t fcpes:1; + uint32_t ptlps:1; + uint32_t reserved_6_11:6; + uint32_t sdes:1; + uint32_t dlpes:1; + uint32_t reserved_0_3:4; + } s; + struct cvmx_pciercx_cfg067_s cn52xx; + struct cvmx_pciercx_cfg067_s cn52xxp1; + struct cvmx_pciercx_cfg067_s cn56xx; + struct cvmx_pciercx_cfg067_s cn56xxp1; +}; + +union cvmx_pciercx_cfg068 { + uint32_t u32; + struct cvmx_pciercx_cfg068_s { + uint32_t reserved_14_31:18; + uint32_t anfes:1; + uint32_t rtts:1; + uint32_t reserved_9_11:3; + uint32_t rnrs:1; + uint32_t bdllps:1; + uint32_t btlps:1; + uint32_t reserved_1_5:5; + uint32_t res:1; + } s; + struct cvmx_pciercx_cfg068_s cn52xx; + struct cvmx_pciercx_cfg068_s cn52xxp1; + struct cvmx_pciercx_cfg068_s cn56xx; + struct cvmx_pciercx_cfg068_s cn56xxp1; +}; + +union cvmx_pciercx_cfg069 { + uint32_t u32; + struct cvmx_pciercx_cfg069_s { + uint32_t reserved_14_31:18; + uint32_t anfem:1; + uint32_t rttm:1; + uint32_t reserved_9_11:3; + uint32_t rnrm:1; + uint32_t bdllpm:1; + uint32_t btlpm:1; + uint32_t reserved_1_5:5; + uint32_t rem:1; + } s; + struct cvmx_pciercx_cfg069_s cn52xx; + struct cvmx_pciercx_cfg069_s cn52xxp1; + struct cvmx_pciercx_cfg069_s cn56xx; + struct cvmx_pciercx_cfg069_s cn56xxp1; +}; + +union cvmx_pciercx_cfg070 { + uint32_t u32; + struct cvmx_pciercx_cfg070_s { + uint32_t reserved_9_31:23; + uint32_t ce:1; + uint32_t cc:1; + uint32_t ge:1; + uint32_t gc:1; + uint32_t fep:5; + } s; + struct cvmx_pciercx_cfg070_s cn52xx; + struct cvmx_pciercx_cfg070_s cn52xxp1; + struct cvmx_pciercx_cfg070_s cn56xx; + struct cvmx_pciercx_cfg070_s cn56xxp1; +}; + +union cvmx_pciercx_cfg071 { + uint32_t u32; + struct cvmx_pciercx_cfg071_s { + uint32_t dword1:32; + } s; + struct cvmx_pciercx_cfg071_s cn52xx; + struct cvmx_pciercx_cfg071_s cn52xxp1; + struct cvmx_pciercx_cfg071_s cn56xx; + struct cvmx_pciercx_cfg071_s cn56xxp1; +}; + +union cvmx_pciercx_cfg072 { + uint32_t u32; + struct cvmx_pciercx_cfg072_s { + uint32_t dword2:32; + } s; + struct cvmx_pciercx_cfg072_s cn52xx; + struct cvmx_pciercx_cfg072_s cn52xxp1; + struct cvmx_pciercx_cfg072_s cn56xx; + struct cvmx_pciercx_cfg072_s cn56xxp1; +}; + +union cvmx_pciercx_cfg073 { + uint32_t u32; + struct cvmx_pciercx_cfg073_s { + uint32_t dword3:32; + } s; + struct cvmx_pciercx_cfg073_s cn52xx; + struct cvmx_pciercx_cfg073_s cn52xxp1; + struct cvmx_pciercx_cfg073_s cn56xx; + struct cvmx_pciercx_cfg073_s cn56xxp1; +}; + +union cvmx_pciercx_cfg074 { + uint32_t u32; + struct cvmx_pciercx_cfg074_s { + uint32_t dword4:32; + } s; + struct cvmx_pciercx_cfg074_s cn52xx; + struct cvmx_pciercx_cfg074_s cn52xxp1; + struct cvmx_pciercx_cfg074_s cn56xx; + struct cvmx_pciercx_cfg074_s cn56xxp1; +}; + +union cvmx_pciercx_cfg075 { + uint32_t u32; + struct cvmx_pciercx_cfg075_s { + uint32_t reserved_3_31:29; + uint32_t fere:1; + uint32_t nfere:1; + uint32_t cere:1; + } s; + struct cvmx_pciercx_cfg075_s cn52xx; + struct cvmx_pciercx_cfg075_s cn52xxp1; + struct cvmx_pciercx_cfg075_s cn56xx; + struct cvmx_pciercx_cfg075_s cn56xxp1; +}; + +union cvmx_pciercx_cfg076 { + uint32_t u32; + struct cvmx_pciercx_cfg076_s { + uint32_t aeimn:5; + uint32_t reserved_7_26:20; + uint32_t femr:1; + uint32_t nfemr:1; + uint32_t fuf:1; + uint32_t multi_efnfr:1; + uint32_t efnfr:1; + uint32_t multi_ecr:1; + uint32_t ecr:1; + } s; + struct cvmx_pciercx_cfg076_s cn52xx; + struct cvmx_pciercx_cfg076_s cn52xxp1; + struct cvmx_pciercx_cfg076_s cn56xx; + struct cvmx_pciercx_cfg076_s cn56xxp1; +}; + +union cvmx_pciercx_cfg077 { + uint32_t u32; + struct cvmx_pciercx_cfg077_s { + uint32_t efnfsi:16; + uint32_t ecsi:16; + } s; + struct cvmx_pciercx_cfg077_s cn52xx; + struct cvmx_pciercx_cfg077_s cn52xxp1; + struct cvmx_pciercx_cfg077_s cn56xx; + struct cvmx_pciercx_cfg077_s cn56xxp1; +}; + +union cvmx_pciercx_cfg448 { + uint32_t u32; + struct cvmx_pciercx_cfg448_s { + uint32_t rtl:16; + uint32_t rtltl:16; + } s; + struct cvmx_pciercx_cfg448_s cn52xx; + struct cvmx_pciercx_cfg448_s cn52xxp1; + struct cvmx_pciercx_cfg448_s cn56xx; + struct cvmx_pciercx_cfg448_s cn56xxp1; +}; + +union cvmx_pciercx_cfg449 { + uint32_t u32; + struct cvmx_pciercx_cfg449_s { + uint32_t omr:32; + } s; + struct cvmx_pciercx_cfg449_s cn52xx; + struct cvmx_pciercx_cfg449_s cn52xxp1; + struct cvmx_pciercx_cfg449_s cn56xx; + struct cvmx_pciercx_cfg449_s cn56xxp1; +}; + +union cvmx_pciercx_cfg450 { + uint32_t u32; + struct cvmx_pciercx_cfg450_s { + uint32_t lpec:8; + uint32_t reserved_22_23:2; + uint32_t link_state:6; + uint32_t force_link:1; + uint32_t reserved_8_14:7; + uint32_t link_num:8; + } s; + struct cvmx_pciercx_cfg450_s cn52xx; + struct cvmx_pciercx_cfg450_s cn52xxp1; + struct cvmx_pciercx_cfg450_s cn56xx; + struct cvmx_pciercx_cfg450_s cn56xxp1; +}; + +union cvmx_pciercx_cfg451 { + uint32_t u32; + struct cvmx_pciercx_cfg451_s { + uint32_t reserved_30_31:2; + uint32_t l1el:3; + uint32_t l0el:3; + uint32_t n_fts_cc:8; + uint32_t n_fts:8; + uint32_t ack_freq:8; + } s; + struct cvmx_pciercx_cfg451_s cn52xx; + struct cvmx_pciercx_cfg451_s cn52xxp1; + struct cvmx_pciercx_cfg451_s cn56xx; + struct cvmx_pciercx_cfg451_s cn56xxp1; +}; + +union cvmx_pciercx_cfg452 { + uint32_t u32; + struct cvmx_pciercx_cfg452_s { + uint32_t reserved_26_31:6; + uint32_t eccrc:1; + uint32_t reserved_22_24:3; + uint32_t lme:6; + uint32_t reserved_8_15:8; + uint32_t flm:1; + uint32_t reserved_6_6:1; + uint32_t dllle:1; + uint32_t reserved_4_4:1; + uint32_t ra:1; + uint32_t le:1; + uint32_t sd:1; + uint32_t omr:1; + } s; + struct cvmx_pciercx_cfg452_s cn52xx; + struct cvmx_pciercx_cfg452_s cn52xxp1; + struct cvmx_pciercx_cfg452_s cn56xx; + struct cvmx_pciercx_cfg452_s cn56xxp1; +}; + +union cvmx_pciercx_cfg453 { + uint32_t u32; + struct cvmx_pciercx_cfg453_s { + uint32_t dlld:1; + uint32_t reserved_26_30:5; + uint32_t ack_nak:1; + uint32_t fcd:1; + uint32_t ilst:24; + } s; + struct cvmx_pciercx_cfg453_s cn52xx; + struct cvmx_pciercx_cfg453_s cn52xxp1; + struct cvmx_pciercx_cfg453_s cn56xx; + struct cvmx_pciercx_cfg453_s cn56xxp1; +}; + +union cvmx_pciercx_cfg454 { + uint32_t u32; + struct cvmx_pciercx_cfg454_s { + uint32_t reserved_29_31:3; + uint32_t tmfcwt:5; + uint32_t tmanlt:5; + uint32_t tmrt:5; + uint32_t reserved_11_13:3; + uint32_t nskps:3; + uint32_t reserved_4_7:4; + uint32_t ntss:4; + } s; + struct cvmx_pciercx_cfg454_s cn52xx; + struct cvmx_pciercx_cfg454_s cn52xxp1; + struct cvmx_pciercx_cfg454_s cn56xx; + struct cvmx_pciercx_cfg454_s cn56xxp1; +}; + +union cvmx_pciercx_cfg455 { + uint32_t u32; + struct cvmx_pciercx_cfg455_s { + uint32_t m_cfg0_filt:1; + uint32_t m_io_filt:1; + uint32_t msg_ctrl:1; + uint32_t m_cpl_ecrc_filt:1; + uint32_t m_ecrc_filt:1; + uint32_t m_cpl_len_err:1; + uint32_t m_cpl_attr_err:1; + uint32_t m_cpl_tc_err:1; + uint32_t m_cpl_fun_err:1; + uint32_t m_cpl_rid_err:1; + uint32_t m_cpl_tag_err:1; + uint32_t m_lk_filt:1; + uint32_t m_cfg1_filt:1; + uint32_t m_bar_match:1; + uint32_t m_pois_filt:1; + uint32_t m_fun:1; + uint32_t dfcwt:1; + uint32_t reserved_11_14:4; + uint32_t skpiv:11; + } s; + struct cvmx_pciercx_cfg455_s cn52xx; + struct cvmx_pciercx_cfg455_s cn52xxp1; + struct cvmx_pciercx_cfg455_s cn56xx; + struct cvmx_pciercx_cfg455_s cn56xxp1; +}; + +union cvmx_pciercx_cfg456 { + uint32_t u32; + struct cvmx_pciercx_cfg456_s { + uint32_t reserved_2_31:30; + uint32_t m_vend1_drp:1; + uint32_t m_vend0_drp:1; + } s; + struct cvmx_pciercx_cfg456_s cn52xx; + struct cvmx_pciercx_cfg456_s cn52xxp1; + struct cvmx_pciercx_cfg456_s cn56xx; + struct cvmx_pciercx_cfg456_s cn56xxp1; +}; + +union cvmx_pciercx_cfg458 { + uint32_t u32; + struct cvmx_pciercx_cfg458_s { + uint32_t dbg_info_l32:32; + } s; + struct cvmx_pciercx_cfg458_s cn52xx; + struct cvmx_pciercx_cfg458_s cn52xxp1; + struct cvmx_pciercx_cfg458_s cn56xx; + struct cvmx_pciercx_cfg458_s cn56xxp1; +}; + +union cvmx_pciercx_cfg459 { + uint32_t u32; + struct cvmx_pciercx_cfg459_s { + uint32_t dbg_info_u32:32; + } s; + struct cvmx_pciercx_cfg459_s cn52xx; + struct cvmx_pciercx_cfg459_s cn52xxp1; + struct cvmx_pciercx_cfg459_s cn56xx; + struct cvmx_pciercx_cfg459_s cn56xxp1; +}; + +union cvmx_pciercx_cfg460 { + uint32_t u32; + struct cvmx_pciercx_cfg460_s { + uint32_t reserved_20_31:12; + uint32_t tphfcc:8; + uint32_t tpdfcc:12; + } s; + struct cvmx_pciercx_cfg460_s cn52xx; + struct cvmx_pciercx_cfg460_s cn52xxp1; + struct cvmx_pciercx_cfg460_s cn56xx; + struct cvmx_pciercx_cfg460_s cn56xxp1; +}; + +union cvmx_pciercx_cfg461 { + uint32_t u32; + struct cvmx_pciercx_cfg461_s { + uint32_t reserved_20_31:12; + uint32_t tchfcc:8; + uint32_t tcdfcc:12; + } s; + struct cvmx_pciercx_cfg461_s cn52xx; + struct cvmx_pciercx_cfg461_s cn52xxp1; + struct cvmx_pciercx_cfg461_s cn56xx; + struct cvmx_pciercx_cfg461_s cn56xxp1; +}; + +union cvmx_pciercx_cfg462 { + uint32_t u32; + struct cvmx_pciercx_cfg462_s { + uint32_t reserved_20_31:12; + uint32_t tchfcc:8; + uint32_t tcdfcc:12; + } s; + struct cvmx_pciercx_cfg462_s cn52xx; + struct cvmx_pciercx_cfg462_s cn52xxp1; + struct cvmx_pciercx_cfg462_s cn56xx; + struct cvmx_pciercx_cfg462_s cn56xxp1; +}; + +union cvmx_pciercx_cfg463 { + uint32_t u32; + struct cvmx_pciercx_cfg463_s { + uint32_t reserved_3_31:29; + uint32_t rqne:1; + uint32_t trbne:1; + uint32_t rtlpfccnr:1; + } s; + struct cvmx_pciercx_cfg463_s cn52xx; + struct cvmx_pciercx_cfg463_s cn52xxp1; + struct cvmx_pciercx_cfg463_s cn56xx; + struct cvmx_pciercx_cfg463_s cn56xxp1; +}; + +union cvmx_pciercx_cfg464 { + uint32_t u32; + struct cvmx_pciercx_cfg464_s { + uint32_t wrr_vc3:8; + uint32_t wrr_vc2:8; + uint32_t wrr_vc1:8; + uint32_t wrr_vc0:8; + } s; + struct cvmx_pciercx_cfg464_s cn52xx; + struct cvmx_pciercx_cfg464_s cn52xxp1; + struct cvmx_pciercx_cfg464_s cn56xx; + struct cvmx_pciercx_cfg464_s cn56xxp1; +}; + +union cvmx_pciercx_cfg465 { + uint32_t u32; + struct cvmx_pciercx_cfg465_s { + uint32_t wrr_vc7:8; + uint32_t wrr_vc6:8; + uint32_t wrr_vc5:8; + uint32_t wrr_vc4:8; + } s; + struct cvmx_pciercx_cfg465_s cn52xx; + struct cvmx_pciercx_cfg465_s cn52xxp1; + struct cvmx_pciercx_cfg465_s cn56xx; + struct cvmx_pciercx_cfg465_s cn56xxp1; +}; + +union cvmx_pciercx_cfg466 { + uint32_t u32; + struct cvmx_pciercx_cfg466_s { + uint32_t rx_queue_order:1; + uint32_t type_ordering:1; + uint32_t reserved_24_29:6; + uint32_t queue_mode:3; + uint32_t reserved_20_20:1; + uint32_t header_credits:8; + uint32_t data_credits:12; + } s; + struct cvmx_pciercx_cfg466_s cn52xx; + struct cvmx_pciercx_cfg466_s cn52xxp1; + struct cvmx_pciercx_cfg466_s cn56xx; + struct cvmx_pciercx_cfg466_s cn56xxp1; +}; + +union cvmx_pciercx_cfg467 { + uint32_t u32; + struct cvmx_pciercx_cfg467_s { + uint32_t reserved_24_31:8; + uint32_t queue_mode:3; + uint32_t reserved_20_20:1; + uint32_t header_credits:8; + uint32_t data_credits:12; + } s; + struct cvmx_pciercx_cfg467_s cn52xx; + struct cvmx_pciercx_cfg467_s cn52xxp1; + struct cvmx_pciercx_cfg467_s cn56xx; + struct cvmx_pciercx_cfg467_s cn56xxp1; +}; + +union cvmx_pciercx_cfg468 { + uint32_t u32; + struct cvmx_pciercx_cfg468_s { + uint32_t reserved_24_31:8; + uint32_t queue_mode:3; + uint32_t reserved_20_20:1; + uint32_t header_credits:8; + uint32_t data_credits:12; + } s; + struct cvmx_pciercx_cfg468_s cn52xx; + struct cvmx_pciercx_cfg468_s cn52xxp1; + struct cvmx_pciercx_cfg468_s cn56xx; + struct cvmx_pciercx_cfg468_s cn56xxp1; +}; + +union cvmx_pciercx_cfg490 { + uint32_t u32; + struct cvmx_pciercx_cfg490_s { + uint32_t reserved_26_31:6; + uint32_t header_depth:10; + uint32_t reserved_14_15:2; + uint32_t data_depth:14; + } s; + struct cvmx_pciercx_cfg490_s cn52xx; + struct cvmx_pciercx_cfg490_s cn52xxp1; + struct cvmx_pciercx_cfg490_s cn56xx; + struct cvmx_pciercx_cfg490_s cn56xxp1; +}; + +union cvmx_pciercx_cfg491 { + uint32_t u32; + struct cvmx_pciercx_cfg491_s { + uint32_t reserved_26_31:6; + uint32_t header_depth:10; + uint32_t reserved_14_15:2; + uint32_t data_depth:14; + } s; + struct cvmx_pciercx_cfg491_s cn52xx; + struct cvmx_pciercx_cfg491_s cn52xxp1; + struct cvmx_pciercx_cfg491_s cn56xx; + struct cvmx_pciercx_cfg491_s cn56xxp1; +}; + +union cvmx_pciercx_cfg492 { + uint32_t u32; + struct cvmx_pciercx_cfg492_s { + uint32_t reserved_26_31:6; + uint32_t header_depth:10; + uint32_t reserved_14_15:2; + uint32_t data_depth:14; + } s; + struct cvmx_pciercx_cfg492_s cn52xx; + struct cvmx_pciercx_cfg492_s cn52xxp1; + struct cvmx_pciercx_cfg492_s cn56xx; + struct cvmx_pciercx_cfg492_s cn56xxp1; +}; + +union cvmx_pciercx_cfg516 { + uint32_t u32; + struct cvmx_pciercx_cfg516_s { + uint32_t phy_stat:32; + } s; + struct cvmx_pciercx_cfg516_s cn52xx; + struct cvmx_pciercx_cfg516_s cn52xxp1; + struct cvmx_pciercx_cfg516_s cn56xx; + struct cvmx_pciercx_cfg516_s cn56xxp1; +}; + +union cvmx_pciercx_cfg517 { + uint32_t u32; + struct cvmx_pciercx_cfg517_s { + uint32_t phy_ctrl:32; + } s; + struct cvmx_pciercx_cfg517_s cn52xx; + struct cvmx_pciercx_cfg517_s cn52xxp1; + struct cvmx_pciercx_cfg517_s cn56xx; + struct cvmx_pciercx_cfg517_s cn56xxp1; +}; + +#endif diff --git a/arch/mips/include/asm/octeon/cvmx-pescx-defs.h b/arch/mips/include/asm/octeon/cvmx-pescx-defs.h new file mode 100644 index 0000000..f40cfaf --- /dev/null +++ b/arch/mips/include/asm/octeon/cvmx-pescx-defs.h @@ -0,0 +1,410 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +#ifndef __CVMX_PESCX_DEFS_H__ +#define __CVMX_PESCX_DEFS_H__ + +#define CVMX_PESCX_BIST_STATUS(block_id) \ + CVMX_ADD_IO_SEG(0x00011800C8000018ull + (((block_id) & 1) * 0x8000000ull)) +#define CVMX_PESCX_BIST_STATUS2(block_id) \ + CVMX_ADD_IO_SEG(0x00011800C8000418ull + (((block_id) & 1) * 0x8000000ull)) +#define CVMX_PESCX_CFG_RD(block_id) \ + CVMX_ADD_IO_SEG(0x00011800C8000030ull + (((block_id) & 1) * 0x8000000ull)) +#define CVMX_PESCX_CFG_WR(block_id) \ + CVMX_ADD_IO_SEG(0x00011800C8000028ull + (((block_id) & 1) * 0x8000000ull)) +#define CVMX_PESCX_CPL_LUT_VALID(block_id) \ + CVMX_ADD_IO_SEG(0x00011800C8000098ull + (((block_id) & 1) * 0x8000000ull)) +#define CVMX_PESCX_CTL_STATUS(block_id) \ + CVMX_ADD_IO_SEG(0x00011800C8000000ull + (((block_id) & 1) * 0x8000000ull)) +#define CVMX_PESCX_CTL_STATUS2(block_id) \ + CVMX_ADD_IO_SEG(0x00011800C8000400ull + (((block_id) & 1) * 0x8000000ull)) +#define CVMX_PESCX_DBG_INFO(block_id) \ + CVMX_ADD_IO_SEG(0x00011800C8000008ull + (((block_id) & 1) * 0x8000000ull)) +#define CVMX_PESCX_DBG_INFO_EN(block_id) \ + CVMX_ADD_IO_SEG(0x00011800C80000A0ull + (((block_id) & 1) * 0x8000000ull)) +#define CVMX_PESCX_DIAG_STATUS(block_id) \ + CVMX_ADD_IO_SEG(0x00011800C8000020ull + (((block_id) & 1) * 0x8000000ull)) +#define CVMX_PESCX_P2N_BAR0_START(block_id) \ + CVMX_ADD_IO_SEG(0x00011800C8000080ull + (((block_id) & 1) * 0x8000000ull)) +#define CVMX_PESCX_P2N_BAR1_START(block_id) \ + CVMX_ADD_IO_SEG(0x00011800C8000088ull + (((block_id) & 1) * 0x8000000ull)) +#define CVMX_PESCX_P2N_BAR2_START(block_id) \ + CVMX_ADD_IO_SEG(0x00011800C8000090ull + (((block_id) & 1) * 0x8000000ull)) +#define CVMX_PESCX_P2P_BARX_END(offset, block_id) \ + CVMX_ADD_IO_SEG(0x00011800C8000048ull + (((offset) & 3) * 16) + (((block_id) & 1) * 0x8000000ull)) +#define CVMX_PESCX_P2P_BARX_START(offset, block_id) \ + CVMX_ADD_IO_SEG(0x00011800C8000040ull + (((offset) & 3) * 16) + (((block_id) & 1) * 0x8000000ull)) +#define CVMX_PESCX_TLP_CREDITS(block_id) \ + CVMX_ADD_IO_SEG(0x00011800C8000038ull + (((block_id) & 1) * 0x8000000ull)) + +union cvmx_pescx_bist_status { + uint64_t u64; + struct cvmx_pescx_bist_status_s { + uint64_t reserved_13_63:51; + uint64_t rqdata5:1; + uint64_t ctlp_or:1; + uint64_t ntlp_or:1; + uint64_t ptlp_or:1; + uint64_t retry:1; + uint64_t rqdata0:1; + uint64_t rqdata1:1; + uint64_t rqdata2:1; + uint64_t rqdata3:1; + uint64_t rqdata4:1; + uint64_t rqhdr1:1; + uint64_t rqhdr0:1; + uint64_t sot:1; + } s; + struct cvmx_pescx_bist_status_s cn52xx; + struct cvmx_pescx_bist_status_cn52xxp1 { + uint64_t reserved_12_63:52; + uint64_t ctlp_or:1; + uint64_t ntlp_or:1; + uint64_t ptlp_or:1; + uint64_t retry:1; + uint64_t rqdata0:1; + uint64_t rqdata1:1; + uint64_t rqdata2:1; + uint64_t rqdata3:1; + uint64_t rqdata4:1; + uint64_t rqhdr1:1; + uint64_t rqhdr0:1; + uint64_t sot:1; + } cn52xxp1; + struct cvmx_pescx_bist_status_s cn56xx; + struct cvmx_pescx_bist_status_cn52xxp1 cn56xxp1; +}; + +union cvmx_pescx_bist_status2 { + uint64_t u64; + struct cvmx_pescx_bist_status2_s { + uint64_t reserved_14_63:50; + uint64_t cto_p2e:1; + uint64_t e2p_cpl:1; + uint64_t e2p_n:1; + uint64_t e2p_p:1; + uint64_t e2p_rsl:1; + uint64_t dbg_p2e:1; + uint64_t peai_p2e:1; + uint64_t rsl_p2e:1; + uint64_t pef_tpf1:1; + uint64_t pef_tpf0:1; + uint64_t pef_tnf:1; + uint64_t pef_tcf1:1; + uint64_t pef_tc0:1; + uint64_t ppf:1; + } s; + struct cvmx_pescx_bist_status2_s cn52xx; + struct cvmx_pescx_bist_status2_s cn52xxp1; + struct cvmx_pescx_bist_status2_s cn56xx; + struct cvmx_pescx_bist_status2_s cn56xxp1; +}; + +union cvmx_pescx_cfg_rd { + uint64_t u64; + struct cvmx_pescx_cfg_rd_s { + uint64_t data:32; + uint64_t addr:32; + } s; + struct cvmx_pescx_cfg_rd_s cn52xx; + struct cvmx_pescx_cfg_rd_s cn52xxp1; + struct cvmx_pescx_cfg_rd_s cn56xx; + struct cvmx_pescx_cfg_rd_s cn56xxp1; +}; + +union cvmx_pescx_cfg_wr { + uint64_t u64; + struct cvmx_pescx_cfg_wr_s { + uint64_t data:32; + uint64_t addr:32; + } s; + struct cvmx_pescx_cfg_wr_s cn52xx; + struct cvmx_pescx_cfg_wr_s cn52xxp1; + struct cvmx_pescx_cfg_wr_s cn56xx; + struct cvmx_pescx_cfg_wr_s cn56xxp1; +}; + +union cvmx_pescx_cpl_lut_valid { + uint64_t u64; + struct cvmx_pescx_cpl_lut_valid_s { + uint64_t reserved_32_63:32; + uint64_t tag:32; + } s; + struct cvmx_pescx_cpl_lut_valid_s cn52xx; + struct cvmx_pescx_cpl_lut_valid_s cn52xxp1; + struct cvmx_pescx_cpl_lut_valid_s cn56xx; + struct cvmx_pescx_cpl_lut_valid_s cn56xxp1; +}; + +union cvmx_pescx_ctl_status { + uint64_t u64; + struct cvmx_pescx_ctl_status_s { + uint64_t reserved_28_63:36; + uint64_t dnum:5; + uint64_t pbus:8; + uint64_t qlm_cfg:2; + uint64_t lane_swp:1; + uint64_t pm_xtoff:1; + uint64_t pm_xpme:1; + uint64_t ob_p_cmd:1; + uint64_t reserved_7_8:2; + uint64_t nf_ecrc:1; + uint64_t dly_one:1; + uint64_t lnk_enb:1; + uint64_t ro_ctlp:1; + uint64_t reserved_2_2:1; + uint64_t inv_ecrc:1; + uint64_t inv_lcrc:1; + } s; + struct cvmx_pescx_ctl_status_s cn52xx; + struct cvmx_pescx_ctl_status_s cn52xxp1; + struct cvmx_pescx_ctl_status_cn56xx { + uint64_t reserved_28_63:36; + uint64_t dnum:5; + uint64_t pbus:8; + uint64_t qlm_cfg:2; + uint64_t reserved_12_12:1; + uint64_t pm_xtoff:1; + uint64_t pm_xpme:1; + uint64_t ob_p_cmd:1; + uint64_t reserved_7_8:2; + uint64_t nf_ecrc:1; + uint64_t dly_one:1; + uint64_t lnk_enb:1; + uint64_t ro_ctlp:1; + uint64_t reserved_2_2:1; + uint64_t inv_ecrc:1; + uint64_t inv_lcrc:1; + } cn56xx; + struct cvmx_pescx_ctl_status_cn56xx cn56xxp1; +}; + +union cvmx_pescx_ctl_status2 { + uint64_t u64; + struct cvmx_pescx_ctl_status2_s { + uint64_t reserved_2_63:62; + uint64_t pclk_run:1; + uint64_t pcierst:1; + } s; + struct cvmx_pescx_ctl_status2_s cn52xx; + struct cvmx_pescx_ctl_status2_cn52xxp1 { + uint64_t reserved_1_63:63; + uint64_t pcierst:1; + } cn52xxp1; + struct cvmx_pescx_ctl_status2_s cn56xx; + struct cvmx_pescx_ctl_status2_cn52xxp1 cn56xxp1; +}; + +union cvmx_pescx_dbg_info { + uint64_t u64; + struct cvmx_pescx_dbg_info_s { + uint64_t reserved_31_63:33; + uint64_t ecrc_e:1; + uint64_t rawwpp:1; + uint64_t racpp:1; + uint64_t ramtlp:1; + uint64_t rarwdns:1; + uint64_t caar:1; + uint64_t racca:1; + uint64_t racur:1; + uint64_t rauc:1; + uint64_t rqo:1; + uint64_t fcuv:1; + uint64_t rpe:1; + uint64_t fcpvwt:1; + uint64_t dpeoosd:1; + uint64_t rtwdle:1; + uint64_t rdwdle:1; + uint64_t mre:1; + uint64_t rte:1; + uint64_t acto:1; + uint64_t rvdm:1; + uint64_t rumep:1; + uint64_t rptamrc:1; + uint64_t rpmerc:1; + uint64_t rfemrc:1; + uint64_t rnfemrc:1; + uint64_t rcemrc:1; + uint64_t rpoison:1; + uint64_t recrce:1; + uint64_t rtlplle:1; + uint64_t rtlpmal:1; + uint64_t spoison:1; + } s; + struct cvmx_pescx_dbg_info_s cn52xx; + struct cvmx_pescx_dbg_info_s cn52xxp1; + struct cvmx_pescx_dbg_info_s cn56xx; + struct cvmx_pescx_dbg_info_s cn56xxp1; +}; + +union cvmx_pescx_dbg_info_en { + uint64_t u64; + struct cvmx_pescx_dbg_info_en_s { + uint64_t reserved_31_63:33; + uint64_t ecrc_e:1; + uint64_t rawwpp:1; + uint64_t racpp:1; + uint64_t ramtlp:1; + uint64_t rarwdns:1; + uint64_t caar:1; + uint64_t racca:1; + uint64_t racur:1; + uint64_t rauc:1; + uint64_t rqo:1; + uint64_t fcuv:1; + uint64_t rpe:1; + uint64_t fcpvwt:1; + uint64_t dpeoosd:1; + uint64_t rtwdle:1; + uint64_t rdwdle:1; + uint64_t mre:1; + uint64_t rte:1; + uint64_t acto:1; + uint64_t rvdm:1; + uint64_t rumep:1; + uint64_t rptamrc:1; + uint64_t rpmerc:1; + uint64_t rfemrc:1; + uint64_t rnfemrc:1; + uint64_t rcemrc:1; + uint64_t rpoison:1; + uint64_t recrce:1; + uint64_t rtlplle:1; + uint64_t rtlpmal:1; + uint64_t spoison:1; + } s; + struct cvmx_pescx_dbg_info_en_s cn52xx; + struct cvmx_pescx_dbg_info_en_s cn52xxp1; + struct cvmx_pescx_dbg_info_en_s cn56xx; + struct cvmx_pescx_dbg_info_en_s cn56xxp1; +}; + +union cvmx_pescx_diag_status { + uint64_t u64; + struct cvmx_pescx_diag_status_s { + uint64_t reserved_4_63:60; + uint64_t pm_dst:1; + uint64_t pm_stat:1; + uint64_t pm_en:1; + uint64_t aux_en:1; + } s; + struct cvmx_pescx_diag_status_s cn52xx; + struct cvmx_pescx_diag_status_s cn52xxp1; + struct cvmx_pescx_diag_status_s cn56xx; + struct cvmx_pescx_diag_status_s cn56xxp1; +}; + +union cvmx_pescx_p2n_bar0_start { + uint64_t u64; + struct cvmx_pescx_p2n_bar0_start_s { + uint64_t addr:50; + uint64_t reserved_0_13:14; + } s; + struct cvmx_pescx_p2n_bar0_start_s cn52xx; + struct cvmx_pescx_p2n_bar0_start_s cn52xxp1; + struct cvmx_pescx_p2n_bar0_start_s cn56xx; + struct cvmx_pescx_p2n_bar0_start_s cn56xxp1; +}; + +union cvmx_pescx_p2n_bar1_start { + uint64_t u64; + struct cvmx_pescx_p2n_bar1_start_s { + uint64_t addr:38; + uint64_t reserved_0_25:26; + } s; + struct cvmx_pescx_p2n_bar1_start_s cn52xx; + struct cvmx_pescx_p2n_bar1_start_s cn52xxp1; + struct cvmx_pescx_p2n_bar1_start_s cn56xx; + struct cvmx_pescx_p2n_bar1_start_s cn56xxp1; +}; + +union cvmx_pescx_p2n_bar2_start { + uint64_t u64; + struct cvmx_pescx_p2n_bar2_start_s { + uint64_t addr:25; + uint64_t reserved_0_38:39; + } s; + struct cvmx_pescx_p2n_bar2_start_s cn52xx; + struct cvmx_pescx_p2n_bar2_start_s cn52xxp1; + struct cvmx_pescx_p2n_bar2_start_s cn56xx; + struct cvmx_pescx_p2n_bar2_start_s cn56xxp1; +}; + +union cvmx_pescx_p2p_barx_end { + uint64_t u64; + struct cvmx_pescx_p2p_barx_end_s { + uint64_t addr:52; + uint64_t reserved_0_11:12; + } s; + struct cvmx_pescx_p2p_barx_end_s cn52xx; + struct cvmx_pescx_p2p_barx_end_s cn52xxp1; + struct cvmx_pescx_p2p_barx_end_s cn56xx; + struct cvmx_pescx_p2p_barx_end_s cn56xxp1; +}; + +union cvmx_pescx_p2p_barx_start { + uint64_t u64; + struct cvmx_pescx_p2p_barx_start_s { + uint64_t addr:52; + uint64_t reserved_0_11:12; + } s; + struct cvmx_pescx_p2p_barx_start_s cn52xx; + struct cvmx_pescx_p2p_barx_start_s cn52xxp1; + struct cvmx_pescx_p2p_barx_start_s cn56xx; + struct cvmx_pescx_p2p_barx_start_s cn56xxp1; +}; + +union cvmx_pescx_tlp_credits { + uint64_t u64; + struct cvmx_pescx_tlp_credits_s { + uint64_t reserved_0_63:64; + } s; + struct cvmx_pescx_tlp_credits_cn52xx { + uint64_t reserved_56_63:8; + uint64_t peai_ppf:8; + uint64_t pesc_cpl:8; + uint64_t pesc_np:8; + uint64_t pesc_p:8; + uint64_t npei_cpl:8; + uint64_t npei_np:8; + uint64_t npei_p:8; + } cn52xx; + struct cvmx_pescx_tlp_credits_cn52xxp1 { + uint64_t reserved_38_63:26; + uint64_t peai_ppf:8; + uint64_t pesc_cpl:5; + uint64_t pesc_np:5; + uint64_t pesc_p:5; + uint64_t npei_cpl:5; + uint64_t npei_np:5; + uint64_t npei_p:5; + } cn52xxp1; + struct cvmx_pescx_tlp_credits_cn52xx cn56xx; + struct cvmx_pescx_tlp_credits_cn52xxp1 cn56xxp1; +}; + +#endif diff --git a/arch/mips/include/asm/octeon/cvmx-pexp-defs.h b/arch/mips/include/asm/octeon/cvmx-pexp-defs.h new file mode 100644 index 0000000..5ea5dc5 --- /dev/null +++ b/arch/mips/include/asm/octeon/cvmx-pexp-defs.h @@ -0,0 +1,229 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +/** + * cvmx-pexp-defs.h + * + * Configuration and status register (CSR) definitions for + * OCTEON PEXP. + * + */ +#ifndef __CVMX_PEXP_DEFS_H__ +#define __CVMX_PEXP_DEFS_H__ + +#define CVMX_PEXP_NPEI_BAR1_INDEXX(offset) \ + CVMX_ADD_IO_SEG(0x00011F0000008000ull + (((offset) & 31) * 16)) +#define CVMX_PEXP_NPEI_BIST_STATUS \ + CVMX_ADD_IO_SEG(0x00011F0000008580ull) +#define CVMX_PEXP_NPEI_BIST_STATUS2 \ + CVMX_ADD_IO_SEG(0x00011F0000008680ull) +#define CVMX_PEXP_NPEI_CTL_PORT0 \ + CVMX_ADD_IO_SEG(0x00011F0000008250ull) +#define CVMX_PEXP_NPEI_CTL_PORT1 \ + CVMX_ADD_IO_SEG(0x00011F0000008260ull) +#define CVMX_PEXP_NPEI_CTL_STATUS \ + CVMX_ADD_IO_SEG(0x00011F0000008570ull) +#define CVMX_PEXP_NPEI_CTL_STATUS2 \ + CVMX_ADD_IO_SEG(0x00011F000000BC00ull) +#define CVMX_PEXP_NPEI_DATA_OUT_CNT \ + CVMX_ADD_IO_SEG(0x00011F00000085F0ull) +#define CVMX_PEXP_NPEI_DBG_DATA \ + CVMX_ADD_IO_SEG(0x00011F0000008510ull) +#define CVMX_PEXP_NPEI_DBG_SELECT \ + CVMX_ADD_IO_SEG(0x00011F0000008500ull) +#define CVMX_PEXP_NPEI_DMA0_INT_LEVEL \ + CVMX_ADD_IO_SEG(0x00011F00000085C0ull) +#define CVMX_PEXP_NPEI_DMA1_INT_LEVEL \ + CVMX_ADD_IO_SEG(0x00011F00000085D0ull) +#define CVMX_PEXP_NPEI_DMAX_COUNTS(offset) \ + CVMX_ADD_IO_SEG(0x00011F0000008450ull + (((offset) & 7) * 16)) +#define CVMX_PEXP_NPEI_DMAX_DBELL(offset) \ + CVMX_ADD_IO_SEG(0x00011F00000083B0ull + (((offset) & 7) * 16)) +#define CVMX_PEXP_NPEI_DMAX_IBUFF_SADDR(offset) \ + CVMX_ADD_IO_SEG(0x00011F0000008400ull + (((offset) & 7) * 16)) +#define CVMX_PEXP_NPEI_DMAX_NADDR(offset) \ + CVMX_ADD_IO_SEG(0x00011F00000084A0ull + (((offset) & 7) * 16)) +#define CVMX_PEXP_NPEI_DMA_CNTS \ + CVMX_ADD_IO_SEG(0x00011F00000085E0ull) +#define CVMX_PEXP_NPEI_DMA_CONTROL \ + CVMX_ADD_IO_SEG(0x00011F00000083A0ull) +#define CVMX_PEXP_NPEI_INT_A_ENB \ + CVMX_ADD_IO_SEG(0x00011F0000008560ull) +#define CVMX_PEXP_NPEI_INT_A_ENB2 \ + CVMX_ADD_IO_SEG(0x00011F000000BCE0ull) +#define CVMX_PEXP_NPEI_INT_A_SUM \ + CVMX_ADD_IO_SEG(0x00011F0000008550ull) +#define CVMX_PEXP_NPEI_INT_ENB \ + CVMX_ADD_IO_SEG(0x00011F0000008540ull) +#define CVMX_PEXP_NPEI_INT_ENB2 \ + CVMX_ADD_IO_SEG(0x00011F000000BCD0ull) +#define CVMX_PEXP_NPEI_INT_INFO \ + CVMX_ADD_IO_SEG(0x00011F0000008590ull) +#define CVMX_PEXP_NPEI_INT_SUM \ + CVMX_ADD_IO_SEG(0x00011F0000008530ull) +#define CVMX_PEXP_NPEI_INT_SUM2 \ + CVMX_ADD_IO_SEG(0x00011F000000BCC0ull) +#define CVMX_PEXP_NPEI_LAST_WIN_RDATA0 \ + CVMX_ADD_IO_SEG(0x00011F0000008600ull) +#define CVMX_PEXP_NPEI_LAST_WIN_RDATA1 \ + CVMX_ADD_IO_SEG(0x00011F0000008610ull) +#define CVMX_PEXP_NPEI_MEM_ACCESS_CTL \ + CVMX_ADD_IO_SEG(0x00011F00000084F0ull) +#define CVMX_PEXP_NPEI_MEM_ACCESS_SUBIDX(offset) \ + CVMX_ADD_IO_SEG(0x00011F0000008280ull + (((offset) & 31) * 16) - 16 * 12) +#define CVMX_PEXP_NPEI_MSI_ENB0 \ + CVMX_ADD_IO_SEG(0x00011F000000BC50ull) +#define CVMX_PEXP_NPEI_MSI_ENB1 \ + CVMX_ADD_IO_SEG(0x00011F000000BC60ull) +#define CVMX_PEXP_NPEI_MSI_ENB2 \ + CVMX_ADD_IO_SEG(0x00011F000000BC70ull) +#define CVMX_PEXP_NPEI_MSI_ENB3 \ + CVMX_ADD_IO_SEG(0x00011F000000BC80ull) +#define CVMX_PEXP_NPEI_MSI_RCV0 \ + CVMX_ADD_IO_SEG(0x00011F000000BC10ull) +#define CVMX_PEXP_NPEI_MSI_RCV1 \ + CVMX_ADD_IO_SEG(0x00011F000000BC20ull) +#define CVMX_PEXP_NPEI_MSI_RCV2 \ + CVMX_ADD_IO_SEG(0x00011F000000BC30ull) +#define CVMX_PEXP_NPEI_MSI_RCV3 \ + CVMX_ADD_IO_SEG(0x00011F000000BC40ull) +#define CVMX_PEXP_NPEI_MSI_RD_MAP \ + CVMX_ADD_IO_SEG(0x00011F000000BCA0ull) +#define CVMX_PEXP_NPEI_MSI_W1C_ENB0 \ + CVMX_ADD_IO_SEG(0x00011F000000BCF0ull) +#define CVMX_PEXP_NPEI_MSI_W1C_ENB1 \ + CVMX_ADD_IO_SEG(0x00011F000000BD00ull) +#define CVMX_PEXP_NPEI_MSI_W1C_ENB2 \ + CVMX_ADD_IO_SEG(0x00011F000000BD10ull) +#define CVMX_PEXP_NPEI_MSI_W1C_ENB3 \ + CVMX_ADD_IO_SEG(0x00011F000000BD20ull) +#define CVMX_PEXP_NPEI_MSI_W1S_ENB0 \ + CVMX_ADD_IO_SEG(0x00011F000000BD30ull) +#define CVMX_PEXP_NPEI_MSI_W1S_ENB1 \ + CVMX_ADD_IO_SEG(0x00011F000000BD40ull) +#define CVMX_PEXP_NPEI_MSI_W1S_ENB2 \ + CVMX_ADD_IO_SEG(0x00011F000000BD50ull) +#define CVMX_PEXP_NPEI_MSI_W1S_ENB3 \ + CVMX_ADD_IO_SEG(0x00011F000000BD60ull) +#define CVMX_PEXP_NPEI_MSI_WR_MAP \ + CVMX_ADD_IO_SEG(0x00011F000000BC90ull) +#define CVMX_PEXP_NPEI_PCIE_CREDIT_CNT \ + CVMX_ADD_IO_SEG(0x00011F000000BD70ull) +#define CVMX_PEXP_NPEI_PCIE_MSI_RCV \ + CVMX_ADD_IO_SEG(0x00011F000000BCB0ull) +#define CVMX_PEXP_NPEI_PCIE_MSI_RCV_B1 \ + CVMX_ADD_IO_SEG(0x00011F0000008650ull) +#define CVMX_PEXP_NPEI_PCIE_MSI_RCV_B2 \ + CVMX_ADD_IO_SEG(0x00011F0000008660ull) +#define CVMX_PEXP_NPEI_PCIE_MSI_RCV_B3 \ + CVMX_ADD_IO_SEG(0x00011F0000008670ull) +#define CVMX_PEXP_NPEI_PKTX_CNTS(offset) \ + CVMX_ADD_IO_SEG(0x00011F000000A400ull + (((offset) & 31) * 16)) +#define CVMX_PEXP_NPEI_PKTX_INSTR_BADDR(offset) \ + CVMX_ADD_IO_SEG(0x00011F000000A800ull + (((offset) & 31) * 16)) +#define CVMX_PEXP_NPEI_PKTX_INSTR_BAOFF_DBELL(offset) \ + CVMX_ADD_IO_SEG(0x00011F000000AC00ull + (((offset) & 31) * 16)) +#define CVMX_PEXP_NPEI_PKTX_INSTR_FIFO_RSIZE(offset) \ + CVMX_ADD_IO_SEG(0x00011F000000B000ull + (((offset) & 31) * 16)) +#define CVMX_PEXP_NPEI_PKTX_INSTR_HEADER(offset) \ + CVMX_ADD_IO_SEG(0x00011F000000B400ull + (((offset) & 31) * 16)) +#define CVMX_PEXP_NPEI_PKTX_IN_BP(offset) \ + CVMX_ADD_IO_SEG(0x00011F000000B800ull + (((offset) & 31) * 16)) +#define CVMX_PEXP_NPEI_PKTX_SLIST_BADDR(offset) \ + CVMX_ADD_IO_SEG(0x00011F0000009400ull + (((offset) & 31) * 16)) +#define CVMX_PEXP_NPEI_PKTX_SLIST_BAOFF_DBELL(offset) \ + CVMX_ADD_IO_SEG(0x00011F0000009800ull + (((offset) & 31) * 16)) +#define CVMX_PEXP_NPEI_PKTX_SLIST_FIFO_RSIZE(offset) \ + CVMX_ADD_IO_SEG(0x00011F0000009C00ull + (((offset) & 31) * 16)) +#define CVMX_PEXP_NPEI_PKT_CNT_INT \ + CVMX_ADD_IO_SEG(0x00011F0000009110ull) +#define CVMX_PEXP_NPEI_PKT_CNT_INT_ENB \ + CVMX_ADD_IO_SEG(0x00011F0000009130ull) +#define CVMX_PEXP_NPEI_PKT_DATA_OUT_ES \ + CVMX_ADD_IO_SEG(0x00011F00000090B0ull) +#define CVMX_PEXP_NPEI_PKT_DATA_OUT_NS \ + CVMX_ADD_IO_SEG(0x00011F00000090A0ull) +#define CVMX_PEXP_NPEI_PKT_DATA_OUT_ROR \ + CVMX_ADD_IO_SEG(0x00011F0000009090ull) +#define CVMX_PEXP_NPEI_PKT_DPADDR \ + CVMX_ADD_IO_SEG(0x00011F0000009080ull) +#define CVMX_PEXP_NPEI_PKT_INPUT_CONTROL \ + CVMX_ADD_IO_SEG(0x00011F0000009150ull) +#define CVMX_PEXP_NPEI_PKT_INSTR_ENB \ + CVMX_ADD_IO_SEG(0x00011F0000009000ull) +#define CVMX_PEXP_NPEI_PKT_INSTR_RD_SIZE \ + CVMX_ADD_IO_SEG(0x00011F0000009190ull) +#define CVMX_PEXP_NPEI_PKT_INSTR_SIZE \ + CVMX_ADD_IO_SEG(0x00011F0000009020ull) +#define CVMX_PEXP_NPEI_PKT_INT_LEVELS \ + CVMX_ADD_IO_SEG(0x00011F0000009100ull) +#define CVMX_PEXP_NPEI_PKT_IN_BP \ + CVMX_ADD_IO_SEG(0x00011F00000086B0ull) +#define CVMX_PEXP_NPEI_PKT_IN_DONEX_CNTS(offset) \ + CVMX_ADD_IO_SEG(0x00011F000000A000ull + (((offset) & 31) * 16)) +#define CVMX_PEXP_NPEI_PKT_IN_INSTR_COUNTS \ + CVMX_ADD_IO_SEG(0x00011F00000086A0ull) +#define CVMX_PEXP_NPEI_PKT_IN_PCIE_PORT \ + CVMX_ADD_IO_SEG(0x00011F00000091A0ull) +#define CVMX_PEXP_NPEI_PKT_IPTR \ + CVMX_ADD_IO_SEG(0x00011F0000009070ull) +#define CVMX_PEXP_NPEI_PKT_OUTPUT_WMARK \ + CVMX_ADD_IO_SEG(0x00011F0000009160ull) +#define CVMX_PEXP_NPEI_PKT_OUT_BMODE \ + CVMX_ADD_IO_SEG(0x00011F00000090D0ull) +#define CVMX_PEXP_NPEI_PKT_OUT_ENB \ + CVMX_ADD_IO_SEG(0x00011F0000009010ull) +#define CVMX_PEXP_NPEI_PKT_PCIE_PORT \ + CVMX_ADD_IO_SEG(0x00011F00000090E0ull) +#define CVMX_PEXP_NPEI_PKT_PORT_IN_RST \ + CVMX_ADD_IO_SEG(0x00011F0000008690ull) +#define CVMX_PEXP_NPEI_PKT_SLIST_ES \ + CVMX_ADD_IO_SEG(0x00011F0000009050ull) +#define CVMX_PEXP_NPEI_PKT_SLIST_ID_SIZE \ + CVMX_ADD_IO_SEG(0x00011F0000009180ull) +#define CVMX_PEXP_NPEI_PKT_SLIST_NS \ + CVMX_ADD_IO_SEG(0x00011F0000009040ull) +#define CVMX_PEXP_NPEI_PKT_SLIST_ROR \ + CVMX_ADD_IO_SEG(0x00011F0000009030ull) +#define CVMX_PEXP_NPEI_PKT_TIME_INT \ + CVMX_ADD_IO_SEG(0x00011F0000009120ull) +#define CVMX_PEXP_NPEI_PKT_TIME_INT_ENB \ + CVMX_ADD_IO_SEG(0x00011F0000009140ull) +#define CVMX_PEXP_NPEI_RSL_INT_BLOCKS \ + CVMX_ADD_IO_SEG(0x00011F0000008520ull) +#define CVMX_PEXP_NPEI_SCRATCH_1 \ + CVMX_ADD_IO_SEG(0x00011F0000008270ull) +#define CVMX_PEXP_NPEI_STATE1 \ + CVMX_ADD_IO_SEG(0x00011F0000008620ull) +#define CVMX_PEXP_NPEI_STATE2 \ + CVMX_ADD_IO_SEG(0x00011F0000008630ull) +#define CVMX_PEXP_NPEI_STATE3 \ + CVMX_ADD_IO_SEG(0x00011F0000008640ull) +#define CVMX_PEXP_NPEI_WINDOW_CTL \ + CVMX_ADD_IO_SEG(0x00011F0000008380ull) + +#endif -- cgit v1.1 From e8635b484f644c7873e6091f15330c49396f2cbc Mon Sep 17 00:00:00 2001 From: David Daney <ddaney@caviumnetworks.com> Date: Thu, 23 Apr 2009 17:44:38 -0700 Subject: MIPS: Add Cavium OCTEON PCI support. This patch adds support for PCI and PCIe to the base Cavium OCTEON processor support. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/Kconfig | 2 + arch/mips/cavium-octeon/Makefile | 4 + arch/mips/cavium-octeon/dma-octeon.c | 311 ++++- arch/mips/cavium-octeon/executive/Makefile | 1 + .../cavium-octeon/executive/cvmx-helper-errata.c | 70 + .../cavium-octeon/executive/cvmx-helper-jtag.c | 144 ++ arch/mips/cavium-octeon/msi.c | 288 ++++ arch/mips/cavium-octeon/octeon-irq.c | 2 + arch/mips/cavium-octeon/pci-common.c | 137 ++ arch/mips/cavium-octeon/pci-common.h | 39 + arch/mips/cavium-octeon/pci.c | 568 ++++++++ arch/mips/cavium-octeon/pcie.c | 1370 ++++++++++++++++++++ arch/mips/include/asm/octeon/cvmx-helper-errata.h | 33 + arch/mips/include/asm/octeon/cvmx-helper-jtag.h | 43 + arch/mips/include/asm/octeon/cvmx.h | 12 + arch/mips/include/asm/octeon/octeon.h | 2 + 16 files changed, 3024 insertions(+), 2 deletions(-) create mode 100644 arch/mips/cavium-octeon/executive/cvmx-helper-errata.c create mode 100644 arch/mips/cavium-octeon/executive/cvmx-helper-jtag.c create mode 100644 arch/mips/cavium-octeon/msi.c create mode 100644 arch/mips/cavium-octeon/pci-common.c create mode 100644 arch/mips/cavium-octeon/pci-common.h create mode 100644 arch/mips/cavium-octeon/pci.c create mode 100644 arch/mips/cavium-octeon/pcie.c create mode 100644 arch/mips/include/asm/octeon/cvmx-helper-errata.h create mode 100644 arch/mips/include/asm/octeon/cvmx-helper-jtag.h (limited to 'arch') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 25f3b0a..96f05e5 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -618,6 +618,8 @@ config CAVIUM_OCTEON_REFERENCE_BOARD select SYS_HAS_EARLY_PRINTK select SYS_HAS_CPU_CAVIUM_OCTEON select SWAP_IO_SPACE + select HW_HAS_PCI + select ARCH_SUPPORTS_MSI help This option supports all of the Octeon reference boards from Cavium Networks. It builds a kernel that dynamically determines the Octeon diff --git a/arch/mips/cavium-octeon/Makefile b/arch/mips/cavium-octeon/Makefile index d6903c3..7c0528b 100644 --- a/arch/mips/cavium-octeon/Makefile +++ b/arch/mips/cavium-octeon/Makefile @@ -14,5 +14,9 @@ obj-y += dma-octeon.o flash_setup.o obj-y += octeon-memcpy.o obj-$(CONFIG_SMP) += smp.o +obj-$(CONFIG_PCI) += pci-common.o +obj-$(CONFIG_PCI) += pci.o +obj-$(CONFIG_PCI) += pcie.o +obj-$(CONFIG_PCI_MSI) += msi.o EXTRA_CFLAGS += -Werror diff --git a/arch/mips/cavium-octeon/dma-octeon.c b/arch/mips/cavium-octeon/dma-octeon.c index 01b1ef9..627c162 100644 --- a/arch/mips/cavium-octeon/dma-octeon.c +++ b/arch/mips/cavium-octeon/dma-octeon.c @@ -13,20 +13,327 @@ */ #include <linux/types.h> #include <linux/mm.h> +#include <linux/module.h> +#include <linux/string.h> +#include <linux/dma-mapping.h> +#include <linux/platform_device.h> +#include <linux/scatterlist.h> + +#include <linux/cache.h> +#include <linux/io.h> + +#include <asm/octeon/octeon.h> +#include <asm/octeon/cvmx-npi-defs.h> +#include <asm/octeon/cvmx-pci-defs.h> #include <dma-coherence.h> +#ifdef CONFIG_PCI +#include "pci-common.h" +#endif + +#define BAR2_PCI_ADDRESS 0x8000000000ul + +struct bar1_index_state { + int16_t ref_count; /* Number of PCI mappings using this index */ + uint16_t address_bits; /* Upper bits of physical address. This is + shifted 22 bits */ +}; + +#ifdef CONFIG_PCI +static DEFINE_SPINLOCK(bar1_lock); +static struct bar1_index_state bar1_state[32]; +#endif + dma_addr_t octeon_map_dma_mem(struct device *dev, void *ptr, size_t size) { +#ifndef CONFIG_PCI /* Without PCI/PCIe this function can be called for Octeon internal devices such as USB. These devices all support 64bit addressing */ mb(); return virt_to_phys(ptr); +#else + unsigned long flags; + uint64_t dma_mask; + int64_t start_index; + dma_addr_t result = -1; + uint64_t physical = virt_to_phys(ptr); + int64_t index; + + mb(); + /* + * Use the DMA masks to determine the allowed memory + * region. For us it doesn't limit the actual memory, just the + * address visible over PCI. Devices with limits need to use + * lower indexed Bar1 entries. + */ + if (dev) { + dma_mask = dev->coherent_dma_mask; + if (dev->dma_mask) + dma_mask = *dev->dma_mask; + } else { + dma_mask = 0xfffffffful; + } + + /* + * Platform devices, such as the internal USB, skip all + * translation and use Octeon physical addresses directly. + */ + if (!dev || dev->bus == &platform_bus_type) + return physical; + + switch (octeon_dma_bar_type) { + case OCTEON_DMA_BAR_TYPE_PCIE: + if (unlikely(physical < (16ul << 10))) + panic("dma_map_single: Not allowed to map first 16KB." + " It interferes with BAR0 special area\n"); + else if ((physical + size >= (256ul << 20)) && + (physical < (512ul << 20))) + panic("dma_map_single: Not allowed to map bootbus\n"); + else if ((physical + size >= 0x400000000ull) && + physical < 0x410000000ull) + panic("dma_map_single: " + "Attempt to map illegal memory address 0x%llx\n", + physical); + else if (physical >= 0x420000000ull) + panic("dma_map_single: " + "Attempt to map illegal memory address 0x%llx\n", + physical); + else if ((physical + size >= + (4ull<<30) - (OCTEON_PCI_BAR1_HOLE_SIZE<<20)) + && physical < (4ull<<30)) + pr_warning("dma_map_single: Warning: " + "Mapping memory address that might " + "conflict with devices 0x%llx-0x%llx\n", + physical, physical+size-1); + /* The 2nd 256MB is mapped at 256<<20 instead of 0x410000000 */ + if ((physical >= 0x410000000ull) && physical < 0x420000000ull) + result = physical - 0x400000000ull; + else + result = physical; + if (((result+size-1) & dma_mask) != result+size-1) + panic("dma_map_single: Attempt to map address " + "0x%llx-0x%llx, which can't be accessed " + "according to the dma mask 0x%llx\n", + physical, physical+size-1, dma_mask); + goto done; + + case OCTEON_DMA_BAR_TYPE_BIG: +#ifdef CONFIG_64BIT + /* If the device supports 64bit addressing, then use BAR2 */ + if (dma_mask > BAR2_PCI_ADDRESS) { + result = physical + BAR2_PCI_ADDRESS; + goto done; + } +#endif + if (unlikely(physical < (4ul << 10))) { + panic("dma_map_single: Not allowed to map first 4KB. " + "It interferes with BAR0 special area\n"); + } else if (physical < (256ul << 20)) { + if (unlikely(physical + size > (256ul << 20))) + panic("dma_map_single: Requested memory spans " + "Bar0 0:256MB and bootbus\n"); + result = physical; + goto done; + } else if (unlikely(physical < (512ul << 20))) { + panic("dma_map_single: Not allowed to map bootbus\n"); + } else if (physical < (2ul << 30)) { + if (unlikely(physical + size > (2ul << 30))) + panic("dma_map_single: Requested memory spans " + "Bar0 512MB:2GB and BAR1\n"); + result = physical; + goto done; + } else if (physical < (2ul << 30) + (128 << 20)) { + /* Fall through */ + } else if (physical < + (4ul << 30) - (OCTEON_PCI_BAR1_HOLE_SIZE << 20)) { + if (unlikely + (physical + size > + (4ul << 30) - (OCTEON_PCI_BAR1_HOLE_SIZE << 20))) + panic("dma_map_single: Requested memory " + "extends past Bar1 (4GB-%luMB)\n", + OCTEON_PCI_BAR1_HOLE_SIZE); + result = physical; + goto done; + } else if ((physical >= 0x410000000ull) && + (physical < 0x420000000ull)) { + if (unlikely(physical + size > 0x420000000ull)) + panic("dma_map_single: Requested memory spans " + "non existant memory\n"); + /* BAR0 fixed mapping 256MB:512MB -> + * 16GB+256MB:16GB+512MB */ + result = physical - 0x400000000ull; + goto done; + } else { + /* Continued below switch statement */ + } + break; + + case OCTEON_DMA_BAR_TYPE_SMALL: +#ifdef CONFIG_64BIT + /* If the device supports 64bit addressing, then use BAR2 */ + if (dma_mask > BAR2_PCI_ADDRESS) { + result = physical + BAR2_PCI_ADDRESS; + goto done; + } +#endif + /* Continued below switch statement */ + break; + + default: + panic("dma_map_single: Invalid octeon_dma_bar_type\n"); + } + + /* Don't allow mapping to span multiple Bar entries. The hardware guys + won't guarantee that DMA across boards work */ + if (unlikely((physical >> 22) != ((physical + size - 1) >> 22))) + panic("dma_map_single: " + "Requested memory spans more than one Bar1 entry\n"); + + if (octeon_dma_bar_type == OCTEON_DMA_BAR_TYPE_BIG) + start_index = 31; + else if (unlikely(dma_mask < (1ul << 27))) + start_index = (dma_mask >> 22); + else + start_index = 31; + + /* Only one processor can access the Bar register at once */ + spin_lock_irqsave(&bar1_lock, flags); + + /* Look through Bar1 for existing mapping that will work */ + for (index = start_index; index >= 0; index--) { + if ((bar1_state[index].address_bits == physical >> 22) && + (bar1_state[index].ref_count)) { + /* An existing mapping will work, use it */ + bar1_state[index].ref_count++; + if (unlikely(bar1_state[index].ref_count < 0)) + panic("dma_map_single: " + "Bar1[%d] reference count overflowed\n", + (int) index); + result = (index << 22) | (physical & ((1 << 22) - 1)); + /* Large BAR1 is offset at 2GB */ + if (octeon_dma_bar_type == OCTEON_DMA_BAR_TYPE_BIG) + result += 2ul << 30; + goto done_unlock; + } + } + + /* No existing mappings, look for a free entry */ + for (index = start_index; index >= 0; index--) { + if (unlikely(bar1_state[index].ref_count == 0)) { + union cvmx_pci_bar1_indexx bar1_index; + /* We have a free entry, use it */ + bar1_state[index].ref_count = 1; + bar1_state[index].address_bits = physical >> 22; + bar1_index.u32 = 0; + /* Address bits[35:22] sent to L2C */ + bar1_index.s.addr_idx = physical >> 22; + /* Don't put PCI accesses in L2. */ + bar1_index.s.ca = 1; + /* Endian Swap Mode */ + bar1_index.s.end_swp = 1; + /* Set '1' when the selected address range is valid. */ + bar1_index.s.addr_v = 1; + octeon_npi_write32(CVMX_NPI_PCI_BAR1_INDEXX(index), + bar1_index.u32); + /* An existing mapping will work, use it */ + result = (index << 22) | (physical & ((1 << 22) - 1)); + /* Large BAR1 is offset at 2GB */ + if (octeon_dma_bar_type == OCTEON_DMA_BAR_TYPE_BIG) + result += 2ul << 30; + goto done_unlock; + } + } + + pr_err("dma_map_single: " + "Can't find empty BAR1 index for physical mapping 0x%llx\n", + (unsigned long long) physical); + +done_unlock: + spin_unlock_irqrestore(&bar1_lock, flags); +done: + pr_debug("dma_map_single 0x%llx->0x%llx\n", physical, result); + return result; +#endif } void octeon_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr) { - /* Without PCI/PCIe this function can be called for Octeon internal - * devices such as USB. These devices all support 64bit addressing */ +#ifndef CONFIG_PCI + /* + * Without PCI/PCIe this function can be called for Octeon internal + * devices such as USB. These devices all support 64bit addressing. + */ + return; +#else + unsigned long flags; + uint64_t index; + + /* + * Platform devices, such as the internal USB, skip all + * translation and use Octeon physical addresses directly. + */ + if (dev->bus == &platform_bus_type) + return; + + switch (octeon_dma_bar_type) { + case OCTEON_DMA_BAR_TYPE_PCIE: + /* Nothing to do, all mappings are static */ + goto done; + + case OCTEON_DMA_BAR_TYPE_BIG: +#ifdef CONFIG_64BIT + /* Nothing to do for addresses using BAR2 */ + if (dma_addr >= BAR2_PCI_ADDRESS) + goto done; +#endif + if (unlikely(dma_addr < (4ul << 10))) + panic("dma_unmap_single: Unexpect DMA address 0x%llx\n", + dma_addr); + else if (dma_addr < (2ul << 30)) + /* Nothing to do for addresses using BAR0 */ + goto done; + else if (dma_addr < (2ul << 30) + (128ul << 20)) + /* Need to unmap, fall through */ + index = (dma_addr - (2ul << 30)) >> 22; + else if (dma_addr < + (4ul << 30) - (OCTEON_PCI_BAR1_HOLE_SIZE << 20)) + goto done; /* Nothing to do for the rest of BAR1 */ + else + panic("dma_unmap_single: Unexpect DMA address 0x%llx\n", + dma_addr); + /* Continued below switch statement */ + break; + + case OCTEON_DMA_BAR_TYPE_SMALL: +#ifdef CONFIG_64BIT + /* Nothing to do for addresses using BAR2 */ + if (dma_addr >= BAR2_PCI_ADDRESS) + goto done; +#endif + index = dma_addr >> 22; + /* Continued below switch statement */ + break; + + default: + panic("dma_unmap_single: Invalid octeon_dma_bar_type\n"); + } + + if (unlikely(index > 31)) + panic("dma_unmap_single: " + "Attempt to unmap an invalid address (0x%llx)\n", + dma_addr); + + spin_lock_irqsave(&bar1_lock, flags); + bar1_state[index].ref_count--; + if (bar1_state[index].ref_count == 0) + octeon_npi_write32(CVMX_NPI_PCI_BAR1_INDEXX(index), 0); + else if (unlikely(bar1_state[index].ref_count < 0)) + panic("dma_unmap_single: Bar1[%u] reference count < 0\n", + (int) index); + spin_unlock_irqrestore(&bar1_lock, flags); +done: + pr_debug("dma_unmap_single 0x%llx\n", dma_addr); return; +#endif } diff --git a/arch/mips/cavium-octeon/executive/Makefile b/arch/mips/cavium-octeon/executive/Makefile index 80d6cb2..2fd66db 100644 --- a/arch/mips/cavium-octeon/executive/Makefile +++ b/arch/mips/cavium-octeon/executive/Makefile @@ -11,3 +11,4 @@ obj-y += cvmx-bootmem.o cvmx-l2c.o cvmx-sysinfo.o octeon-model.o +obj-$(CONFIG_PCI) += cvmx-helper-errata.o cvmx-helper-jtag.o diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-errata.c b/arch/mips/cavium-octeon/executive/cvmx-helper-errata.c new file mode 100644 index 0000000..8fb8205 --- /dev/null +++ b/arch/mips/cavium-octeon/executive/cvmx-helper-errata.c @@ -0,0 +1,70 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +/** + * + * Fixes and workaround for Octeon chip errata. This file + * contains functions called by cvmx-helper to workaround known + * chip errata. For the most part, code doesn't need to call + * these functions directly. + * + */ +#include <asm/octeon/octeon.h> + +#include <asm/octeon/cvmx-helper-jtag.h> + +/** + * Due to errata G-720, the 2nd order CDR circuit on CN52XX pass + * 1 doesn't work properly. The following code disables 2nd order + * CDR for the specified QLM. + * + * @qlm: QLM to disable 2nd order CDR for. + */ +void __cvmx_helper_errata_qlm_disable_2nd_order_cdr(int qlm) +{ + int lane; + cvmx_helper_qlm_jtag_init(); + /* We need to load all four lanes of the QLM, a total of 1072 bits */ + for (lane = 0; lane < 4; lane++) { + /* + * Each lane has 268 bits. We need to set + * cfg_cdr_incx<67:64> = 3 and cfg_cdr_secord<77> = + * 1. All other bits are zero. Bits go in LSB first, + * so start off with the zeros for bits <63:0>. + */ + cvmx_helper_qlm_jtag_shift_zeros(qlm, 63 - 0 + 1); + /* cfg_cdr_incx<67:64>=3 */ + cvmx_helper_qlm_jtag_shift(qlm, 67 - 64 + 1, 3); + /* Zeros for bits <76:68> */ + cvmx_helper_qlm_jtag_shift_zeros(qlm, 76 - 68 + 1); + /* cfg_cdr_secord<77>=1 */ + cvmx_helper_qlm_jtag_shift(qlm, 77 - 77 + 1, 1); + /* Zeros for bits <267:78> */ + cvmx_helper_qlm_jtag_shift_zeros(qlm, 267 - 78 + 1); + } + cvmx_helper_qlm_jtag_update(qlm); +} diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-jtag.c b/arch/mips/cavium-octeon/executive/cvmx-helper-jtag.c new file mode 100644 index 0000000..c1c5489 --- /dev/null +++ b/arch/mips/cavium-octeon/executive/cvmx-helper-jtag.c @@ -0,0 +1,144 @@ + +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +/** + * + * Helper utilities for qlm_jtag. + * + */ + +#include <asm/octeon/octeon.h> +#include <asm/octeon/cvmx-helper-jtag.h> + + +/** + * Initialize the internal QLM JTAG logic to allow programming + * of the JTAG chain by the cvmx_helper_qlm_jtag_*() functions. + * These functions should only be used at the direction of Cavium + * Networks. Programming incorrect values into the JTAG chain + * can cause chip damage. + */ +void cvmx_helper_qlm_jtag_init(void) +{ + union cvmx_ciu_qlm_jtgc jtgc; + uint32_t clock_div = 0; + uint32_t divisor = cvmx_sysinfo_get()->cpu_clock_hz / (25 * 1000000); + divisor = (divisor - 1) >> 2; + /* Convert the divisor into a power of 2 shift */ + while (divisor) { + clock_div++; + divisor = divisor >> 1; + } + + /* + * Clock divider for QLM JTAG operations. eclk is divided by + * 2^(CLK_DIV + 2) + */ + jtgc.u64 = 0; + jtgc.s.clk_div = clock_div; + jtgc.s.mux_sel = 0; + if (OCTEON_IS_MODEL(OCTEON_CN52XX)) + jtgc.s.bypass = 0x3; + else + jtgc.s.bypass = 0xf; + cvmx_write_csr(CVMX_CIU_QLM_JTGC, jtgc.u64); + cvmx_read_csr(CVMX_CIU_QLM_JTGC); +} + +/** + * Write up to 32bits into the QLM jtag chain. Bits are shifted + * into the MSB and out the LSB, so you should shift in the low + * order bits followed by the high order bits. The JTAG chain is + * 4 * 268 bits long, or 1072. + * + * @qlm: QLM to shift value into + * @bits: Number of bits to shift in (1-32). + * @data: Data to shift in. Bit 0 enters the chain first, followed by + * bit 1, etc. + * + * Returns The low order bits of the JTAG chain that shifted out of the + * circle. + */ +uint32_t cvmx_helper_qlm_jtag_shift(int qlm, int bits, uint32_t data) +{ + union cvmx_ciu_qlm_jtgd jtgd; + jtgd.u64 = 0; + jtgd.s.shift = 1; + jtgd.s.shft_cnt = bits - 1; + jtgd.s.shft_reg = data; + if (!OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_X)) + jtgd.s.select = 1 << qlm; + cvmx_write_csr(CVMX_CIU_QLM_JTGD, jtgd.u64); + do { + jtgd.u64 = cvmx_read_csr(CVMX_CIU_QLM_JTGD); + } while (jtgd.s.shift); + return jtgd.s.shft_reg >> (32 - bits); +} + +/** + * Shift long sequences of zeros into the QLM JTAG chain. It is + * common to need to shift more than 32 bits of zeros into the + * chain. This function is a convience wrapper around + * cvmx_helper_qlm_jtag_shift() to shift more than 32 bits of + * zeros at a time. + * + * @qlm: QLM to shift zeros into + * @bits: + */ +void cvmx_helper_qlm_jtag_shift_zeros(int qlm, int bits) +{ + while (bits > 0) { + int n = bits; + if (n > 32) + n = 32; + cvmx_helper_qlm_jtag_shift(qlm, n, 0); + bits -= n; + } +} + +/** + * Program the QLM JTAG chain into all lanes of the QLM. You must + * have already shifted in 268*4, or 1072 bits into the JTAG + * chain. Updating invalid values can possibly cause chip damage. + * + * @qlm: QLM to program + */ +void cvmx_helper_qlm_jtag_update(int qlm) +{ + union cvmx_ciu_qlm_jtgd jtgd; + + /* Update the new data */ + jtgd.u64 = 0; + jtgd.s.update = 1; + if (!OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_X)) + jtgd.s.select = 1 << qlm; + cvmx_write_csr(CVMX_CIU_QLM_JTGD, jtgd.u64); + do { + jtgd.u64 = cvmx_read_csr(CVMX_CIU_QLM_JTGD); + } while (jtgd.s.update); +} diff --git a/arch/mips/cavium-octeon/msi.c b/arch/mips/cavium-octeon/msi.c new file mode 100644 index 0000000..964b03b --- /dev/null +++ b/arch/mips/cavium-octeon/msi.c @@ -0,0 +1,288 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2005-2007 Cavium Networks + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/msi.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> + +#include <asm/octeon/octeon.h> +#include <asm/octeon/cvmx-npi-defs.h> +#include <asm/octeon/cvmx-pci-defs.h> +#include <asm/octeon/cvmx-npei-defs.h> +#include <asm/octeon/cvmx-pexp-defs.h> + +#include "pci-common.h" + +/* + * Each bit in msi_free_irq_bitmask represents a MSI interrupt that is + * in use. + */ +static uint64_t msi_free_irq_bitmask; + +/* + * Each bit in msi_multiple_irq_bitmask tells that the device using + * this bit in msi_free_irq_bitmask is also using the next bit. This + * is used so we can disable all of the MSI interrupts when a device + * uses multiple. + */ +static uint64_t msi_multiple_irq_bitmask; + +/* + * This lock controls updates to msi_free_irq_bitmask and + * msi_multiple_irq_bitmask. + */ +static DEFINE_SPINLOCK(msi_free_irq_bitmask_lock); + + +/** + * Called when a driver request MSI interrupts instead of the + * legacy INT A-D. This routine will allocate multiple interrupts + * for MSI devices that support them. A device can override this by + * programming the MSI control bits [6:4] before calling + * pci_enable_msi(). + * + * @param dev Device requesting MSI interrupts + * @param desc MSI descriptor + * + * Returns 0 on success. + */ +int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc) +{ + struct msi_msg msg; + uint16_t control; + int configured_private_bits; + int request_private_bits; + int irq; + int irq_step; + uint64_t search_mask; + + /* + * Read the MSI config to figure out how many IRQs this device + * wants. Most devices only want 1, which will give + * configured_private_bits and request_private_bits equal 0. + */ + pci_read_config_word(dev, desc->msi_attrib.pos + PCI_MSI_FLAGS, + &control); + + /* + * If the number of private bits has been configured then use + * that value instead of the requested number. This gives the + * driver the chance to override the number of interrupts + * before calling pci_enable_msi(). + */ + configured_private_bits = (control & PCI_MSI_FLAGS_QSIZE) >> 4; + if (configured_private_bits == 0) { + /* Nothing is configured, so use the hardware requested size */ + request_private_bits = (control & PCI_MSI_FLAGS_QMASK) >> 1; + } else { + /* + * Use the number of configured bits, assuming the + * driver wanted to override the hardware request + * value. + */ + request_private_bits = configured_private_bits; + } + + /* + * The PCI 2.3 spec mandates that there are at most 32 + * interrupts. If this device asks for more, only give it one. + */ + if (request_private_bits > 5) + request_private_bits = 0; + +try_only_one: + /* + * The IRQs have to be aligned on a power of two based on the + * number being requested. + */ + irq_step = 1 << request_private_bits; + + /* Mask with one bit for each IRQ */ + search_mask = (1 << irq_step) - 1; + + /* + * We're going to search msi_free_irq_bitmask_lock for zero + * bits. This represents an MSI interrupt number that isn't in + * use. + */ + spin_lock(&msi_free_irq_bitmask_lock); + for (irq = 0; irq < 64; irq += irq_step) { + if ((msi_free_irq_bitmask & (search_mask << irq)) == 0) { + msi_free_irq_bitmask |= search_mask << irq; + msi_multiple_irq_bitmask |= (search_mask >> 1) << irq; + break; + } + } + spin_unlock(&msi_free_irq_bitmask_lock); + + /* Make sure the search for available interrupts didn't fail */ + if (irq >= 64) { + if (request_private_bits) { + pr_err("arch_setup_msi_irq: Unable to find %d free " + "interrupts, trying just one", + 1 << request_private_bits); + request_private_bits = 0; + goto try_only_one; + } else + panic("arch_setup_msi_irq: Unable to find a free MSI " + "interrupt"); + } + + /* MSI interrupts start at logical IRQ OCTEON_IRQ_MSI_BIT0 */ + irq += OCTEON_IRQ_MSI_BIT0; + + switch (octeon_dma_bar_type) { + case OCTEON_DMA_BAR_TYPE_SMALL: + /* When not using big bar, Bar 0 is based at 128MB */ + msg.address_lo = + ((128ul << 20) + CVMX_PCI_MSI_RCV) & 0xffffffff; + msg.address_hi = ((128ul << 20) + CVMX_PCI_MSI_RCV) >> 32; + case OCTEON_DMA_BAR_TYPE_BIG: + /* When using big bar, Bar 0 is based at 0 */ + msg.address_lo = (0 + CVMX_PCI_MSI_RCV) & 0xffffffff; + msg.address_hi = (0 + CVMX_PCI_MSI_RCV) >> 32; + break; + case OCTEON_DMA_BAR_TYPE_PCIE: + /* When using PCIe, Bar 0 is based at 0 */ + /* FIXME CVMX_NPEI_MSI_RCV* other than 0? */ + msg.address_lo = (0 + CVMX_NPEI_PCIE_MSI_RCV) & 0xffffffff; + msg.address_hi = (0 + CVMX_NPEI_PCIE_MSI_RCV) >> 32; + break; + default: + panic("arch_setup_msi_irq: Invalid octeon_dma_bar_type\n"); + } + msg.data = irq - OCTEON_IRQ_MSI_BIT0; + + /* Update the number of IRQs the device has available to it */ + control &= ~PCI_MSI_FLAGS_QSIZE; + control |= request_private_bits << 4; + pci_write_config_word(dev, desc->msi_attrib.pos + PCI_MSI_FLAGS, + control); + + set_irq_msi(irq, desc); + write_msi_msg(irq, &msg); + return 0; +} + + +/** + * Called when a device no longer needs its MSI interrupts. All + * MSI interrupts for the device are freed. + * + * @irq: The devices first irq number. There may be multple in sequence. + */ +void arch_teardown_msi_irq(unsigned int irq) +{ + int number_irqs; + uint64_t bitmask; + + if ((irq < OCTEON_IRQ_MSI_BIT0) || (irq > OCTEON_IRQ_MSI_BIT63)) + panic("arch_teardown_msi_irq: Attempted to teardown illegal " + "MSI interrupt (%d)", irq); + irq -= OCTEON_IRQ_MSI_BIT0; + + /* + * Count the number of IRQs we need to free by looking at the + * msi_multiple_irq_bitmask. Each bit set means that the next + * IRQ is also owned by this device. + */ + number_irqs = 0; + while ((irq+number_irqs < 64) && + (msi_multiple_irq_bitmask & (1ull << (irq + number_irqs)))) + number_irqs++; + number_irqs++; + /* Mask with one bit for each IRQ */ + bitmask = (1 << number_irqs) - 1; + /* Shift the mask to the correct bit location */ + bitmask <<= irq; + if ((msi_free_irq_bitmask & bitmask) != bitmask) + panic("arch_teardown_msi_irq: Attempted to teardown MSI " + "interrupt (%d) not in use", irq); + + /* Checks are done, update the in use bitmask */ + spin_lock(&msi_free_irq_bitmask_lock); + msi_free_irq_bitmask &= ~bitmask; + msi_multiple_irq_bitmask &= ~bitmask; + spin_unlock(&msi_free_irq_bitmask_lock); +} + + +/** + * Called by the interrupt handling code when an MSI interrupt + * occurs. + * + * @param cpl + * @param dev_id + * + * @return + */ +static irqreturn_t octeon_msi_interrupt(int cpl, void *dev_id) +{ + uint64_t msi_bits; + int irq; + + if (octeon_dma_bar_type == OCTEON_DMA_BAR_TYPE_PCIE) + msi_bits = cvmx_read_csr(CVMX_PEXP_NPEI_MSI_RCV0); + else + msi_bits = cvmx_read_csr(CVMX_NPI_NPI_MSI_RCV); + irq = fls64(msi_bits); + if (irq) { + irq += OCTEON_IRQ_MSI_BIT0 - 1; + if (irq_desc[irq].action) { + do_IRQ(irq); + return IRQ_HANDLED; + } else { + pr_err("Spurious MSI interrupt %d\n", irq); + if (octeon_has_feature(OCTEON_FEATURE_PCIE)) { + /* These chips have PCIe */ + cvmx_write_csr(CVMX_PEXP_NPEI_MSI_RCV0, + 1ull << (irq - + OCTEON_IRQ_MSI_BIT0)); + } else { + /* These chips have PCI */ + cvmx_write_csr(CVMX_NPI_NPI_MSI_RCV, + 1ull << (irq - + OCTEON_IRQ_MSI_BIT0)); + } + } + } + return IRQ_NONE; +} + + +/** + * Initializes the MSI interrupt handling code + * + * @return + */ +int octeon_msi_initialize(void) +{ + int r; + if (octeon_has_feature(OCTEON_FEATURE_PCIE)) { + r = request_irq(OCTEON_IRQ_PCI_MSI0, octeon_msi_interrupt, + IRQF_SHARED, + "MSI[0:63]", octeon_msi_interrupt); + } else if (octeon_is_pci_host()) { + r = request_irq(OCTEON_IRQ_PCI_MSI0, octeon_msi_interrupt, + IRQF_SHARED, + "MSI[0:15]", octeon_msi_interrupt); + r += request_irq(OCTEON_IRQ_PCI_MSI1, octeon_msi_interrupt, + IRQF_SHARED, + "MSI[16:31]", octeon_msi_interrupt); + r += request_irq(OCTEON_IRQ_PCI_MSI2, octeon_msi_interrupt, + IRQF_SHARED, + "MSI[32:47]", octeon_msi_interrupt); + r += request_irq(OCTEON_IRQ_PCI_MSI3, octeon_msi_interrupt, + IRQF_SHARED, + "MSI[48:63]", octeon_msi_interrupt); + } + return 0; +} + +subsys_initcall(octeon_msi_initialize); diff --git a/arch/mips/cavium-octeon/octeon-irq.c b/arch/mips/cavium-octeon/octeon-irq.c index d3a0c81..8dfa009 100644 --- a/arch/mips/cavium-octeon/octeon-irq.c +++ b/arch/mips/cavium-octeon/octeon-irq.c @@ -10,6 +10,8 @@ #include <linux/hardirq.h> #include <asm/octeon/octeon.h> +#include <asm/octeon/cvmx-pexp-defs.h> +#include <asm/octeon/cvmx-npi-defs.h> DEFINE_RWLOCK(octeon_irq_ciu0_rwlock); DEFINE_RWLOCK(octeon_irq_ciu1_rwlock); diff --git a/arch/mips/cavium-octeon/pci-common.c b/arch/mips/cavium-octeon/pci-common.c new file mode 100644 index 0000000..cd029f8 --- /dev/null +++ b/arch/mips/cavium-octeon/pci-common.c @@ -0,0 +1,137 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2005-2007 Cavium Networks + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/interrupt.h> +#include <linux/time.h> +#include <linux/delay.h> +#include "pci-common.h" + +typeof(pcibios_map_irq) *octeon_pcibios_map_irq; +enum octeon_dma_bar_type octeon_dma_bar_type = OCTEON_DMA_BAR_TYPE_INVALID; + +/** + * Map a PCI device to the appropriate interrupt line + * + * @param dev The Linux PCI device structure for the device to map + * @param slot The slot number for this device on __BUS 0__. Linux + * enumerates through all the bridges and figures out the + * slot on Bus 0 where this device eventually hooks to. + * @param pin The PCI interrupt pin read from the device, then swizzled + * as it goes through each bridge. + * @return Interrupt number for the device + */ +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + if (octeon_pcibios_map_irq) + return octeon_pcibios_map_irq(dev, slot, pin); + else + panic("octeon_pcibios_map_irq doesn't point to a " + "pcibios_map_irq() function"); +} + + +/** + * Called to perform platform specific PCI setup + * + * @param dev + * @return + */ +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + uint16_t config; + uint32_t dconfig; + int pos; + /* + * Force the Cache line setting to 64 bytes. The standard + * Linux bus scan doesn't seem to set it. Octeon really has + * 128 byte lines, but Intel bridges get really upset if you + * try and set values above 64 bytes. Value is specified in + * 32bit words. + */ + pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 64 / 4); + /* Set latency timers for all devices */ + pci_write_config_byte(dev, PCI_LATENCY_TIMER, 48); + + /* Enable reporting System errors and parity errors on all devices */ + /* Enable parity checking and error reporting */ + pci_read_config_word(dev, PCI_COMMAND, &config); + config |= PCI_COMMAND_PARITY | PCI_COMMAND_SERR; + pci_write_config_word(dev, PCI_COMMAND, config); + + if (dev->subordinate) { + /* Set latency timers on sub bridges */ + pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, 48); + /* More bridge error detection */ + pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &config); + config |= PCI_BRIDGE_CTL_PARITY | PCI_BRIDGE_CTL_SERR; + pci_write_config_word(dev, PCI_BRIDGE_CONTROL, config); + } + + /* Enable the PCIe normal error reporting */ + pos = pci_find_capability(dev, PCI_CAP_ID_EXP); + if (pos) { + /* Update Device Control */ + pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &config); + /* Correctable Error Reporting */ + config |= PCI_EXP_DEVCTL_CERE; + /* Non-Fatal Error Reporting */ + config |= PCI_EXP_DEVCTL_NFERE; + /* Fatal Error Reporting */ + config |= PCI_EXP_DEVCTL_FERE; + /* Unsupported Request */ + config |= PCI_EXP_DEVCTL_URRE; + pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, config); + } + + /* Find the Advanced Error Reporting capability */ + pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR); + if (pos) { + /* Clear Uncorrectable Error Status */ + pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, + &dconfig); + pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, + dconfig); + /* Enable reporting of all uncorrectable errors */ + /* Uncorrectable Error Mask - turned on bits disable errors */ + pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, 0); + /* + * Leave severity at HW default. This only controls if + * errors are reported as uncorrectable or + * correctable, not if the error is reported. + */ + /* PCI_ERR_UNCOR_SEVER - Uncorrectable Error Severity */ + /* Clear Correctable Error Status */ + pci_read_config_dword(dev, pos + PCI_ERR_COR_STATUS, &dconfig); + pci_write_config_dword(dev, pos + PCI_ERR_COR_STATUS, dconfig); + /* Enable reporting of all correctable errors */ + /* Correctable Error Mask - turned on bits disable errors */ + pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, 0); + /* Advanced Error Capabilities */ + pci_read_config_dword(dev, pos + PCI_ERR_CAP, &dconfig); + /* ECRC Generation Enable */ + if (config & PCI_ERR_CAP_ECRC_GENC) + config |= PCI_ERR_CAP_ECRC_GENE; + /* ECRC Check Enable */ + if (config & PCI_ERR_CAP_ECRC_CHKC) + config |= PCI_ERR_CAP_ECRC_CHKE; + pci_write_config_dword(dev, pos + PCI_ERR_CAP, dconfig); + /* PCI_ERR_HEADER_LOG - Header Log Register (16 bytes) */ + /* Report all errors to the root complex */ + pci_write_config_dword(dev, pos + PCI_ERR_ROOT_COMMAND, + PCI_ERR_ROOT_CMD_COR_EN | + PCI_ERR_ROOT_CMD_NONFATAL_EN | + PCI_ERR_ROOT_CMD_FATAL_EN); + /* Clear the Root status register */ + pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, &dconfig); + pci_write_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, dconfig); + } + + return 0; +} diff --git a/arch/mips/cavium-octeon/pci-common.h b/arch/mips/cavium-octeon/pci-common.h new file mode 100644 index 0000000..74ae799 --- /dev/null +++ b/arch/mips/cavium-octeon/pci-common.h @@ -0,0 +1,39 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2005-2007 Cavium Networks + */ +#ifndef __OCTEON_PCI_COMMON_H__ +#define __OCTEON_PCI_COMMON_H__ + +#include <linux/pci.h> + +/* Some PCI cards require delays when accessing config space. */ +#define PCI_CONFIG_SPACE_DELAY 10000 + +/* pcibios_map_irq() is defined inside pci-common.c. All it does is call the + Octeon specific version pointed to by this variable. This function needs to + change for PCI or PCIe based hosts */ +extern typeof(pcibios_map_irq) *octeon_pcibios_map_irq; + +/* The following defines are only used when octeon_dma_bar_type = + OCTEON_DMA_BAR_TYPE_BIG */ +#define OCTEON_PCI_BAR1_HOLE_BITS 5 +#define OCTEON_PCI_BAR1_HOLE_SIZE (1ul<<(OCTEON_PCI_BAR1_HOLE_BITS+3)) + +enum octeon_dma_bar_type { + OCTEON_DMA_BAR_TYPE_INVALID, + OCTEON_DMA_BAR_TYPE_SMALL, + OCTEON_DMA_BAR_TYPE_BIG, + OCTEON_DMA_BAR_TYPE_PCIE +}; + +/** + * This is a variable to tell the DMA mapping system in dma-octeon.c + * how to map PCI DMA addresses. + */ +extern enum octeon_dma_bar_type octeon_dma_bar_type; + +#endif diff --git a/arch/mips/cavium-octeon/pci.c b/arch/mips/cavium-octeon/pci.c new file mode 100644 index 0000000..67c0ff5 --- /dev/null +++ b/arch/mips/cavium-octeon/pci.c @@ -0,0 +1,568 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2005-2007 Cavium Networks + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/interrupt.h> +#include <linux/time.h> +#include <linux/delay.h> + +#include <asm/time.h> + +#include <asm/octeon/octeon.h> +#include <asm/octeon/cvmx-npi-defs.h> +#include <asm/octeon/cvmx-pci-defs.h> + +#include "pci-common.h" + +#define USE_OCTEON_INTERNAL_ARBITER + +/* + * Octeon's PCI controller uses did=3, subdid=2 for PCI IO + * addresses. Use PCI endian swapping 1 so no address swapping is + * necessary. The Linux io routines will endian swap the data. + */ +#define OCTEON_PCI_IOSPACE_BASE 0x80011a0400000000ull +#define OCTEON_PCI_IOSPACE_SIZE (1ull<<32) + +/* Octeon't PCI controller uses did=3, subdid=3 for PCI memory. */ +#define OCTEON_PCI_MEMSPACE_OFFSET (0x00011b0000000000ull) + +/** + * This is the bit decoding used for the Octeon PCI controller addresses + */ +union octeon_pci_address { + uint64_t u64; + struct { + uint64_t upper:2; + uint64_t reserved:13; + uint64_t io:1; + uint64_t did:5; + uint64_t subdid:3; + uint64_t reserved2:4; + uint64_t endian_swap:2; + uint64_t reserved3:10; + uint64_t bus:8; + uint64_t dev:5; + uint64_t func:3; + uint64_t reg:8; + } s; +}; + +/** + * Return the mapping of PCI device number to IRQ line. Each + * character in the return string represents the interrupt + * line for the device at that position. Device 1 maps to the + * first character, etc. The characters A-D are used for PCI + * interrupts. + * + * Returns PCI interrupt mapping + */ +const char *octeon_get_pci_interrupts(void) +{ + /* + * Returning an empty string causes the interrupts to be + * routed based on the PCI specification. From the PCI spec: + * + * INTA# of Device Number 0 is connected to IRQW on the system + * board. (Device Number has no significance regarding being + * located on the system board or in a connector.) INTA# of + * Device Number 1 is connected to IRQX on the system + * board. INTA# of Device Number 2 is connected to IRQY on the + * system board. INTA# of Device Number 3 is connected to IRQZ + * on the system board. The table below describes how each + * agent's INTx# lines are connected to the system board + * interrupt lines. The following equation can be used to + * determine to which INTx# signal on the system board a given + * device's INTx# line(s) is connected. + * + * MB = (D + I) MOD 4 MB = System board Interrupt (IRQW = 0, + * IRQX = 1, IRQY = 2, and IRQZ = 3) D = Device Number I = + * Interrupt Number (INTA# = 0, INTB# = 1, INTC# = 2, and + * INTD# = 3) + */ + switch (octeon_bootinfo->board_type) { + case CVMX_BOARD_TYPE_NAO38: + /* This is really the NAC38 */ + return "AAAAADABAAAAAAAAAAAAAAAAAAAAAAAA"; + case CVMX_BOARD_TYPE_THUNDER: + return ""; + case CVMX_BOARD_TYPE_EBH3000: + return ""; + case CVMX_BOARD_TYPE_EBH3100: + case CVMX_BOARD_TYPE_CN3010_EVB_HS5: + case CVMX_BOARD_TYPE_CN3005_EVB_HS5: + return "AAABAAAAAAAAAAAAAAAAAAAAAAAAAAAA"; + case CVMX_BOARD_TYPE_BBGW_REF: + return "AABCD"; + default: + return ""; + } +} + +/** + * Map a PCI device to the appropriate interrupt line + * + * @dev: The Linux PCI device structure for the device to map + * @slot: The slot number for this device on __BUS 0__. Linux + * enumerates through all the bridges and figures out the + * slot on Bus 0 where this device eventually hooks to. + * @pin: The PCI interrupt pin read from the device, then swizzled + * as it goes through each bridge. + * Returns Interrupt number for the device + */ +int __init octeon_pci_pcibios_map_irq(const struct pci_dev *dev, + u8 slot, u8 pin) +{ + int irq_num; + const char *interrupts; + int dev_num; + + /* Get the board specific interrupt mapping */ + interrupts = octeon_get_pci_interrupts(); + + dev_num = dev->devfn >> 3; + if (dev_num < strlen(interrupts)) + irq_num = ((interrupts[dev_num] - 'A' + pin - 1) & 3) + + OCTEON_IRQ_PCI_INT0; + else + irq_num = ((slot + pin - 3) & 3) + OCTEON_IRQ_PCI_INT0; + return irq_num; +} + + +/** + * Read a value from configuration space + * + */ +static int octeon_read_config(struct pci_bus *bus, unsigned int devfn, + int reg, int size, u32 *val) +{ + union octeon_pci_address pci_addr; + + pci_addr.u64 = 0; + pci_addr.s.upper = 2; + pci_addr.s.io = 1; + pci_addr.s.did = 3; + pci_addr.s.subdid = 1; + pci_addr.s.endian_swap = 1; + pci_addr.s.bus = bus->number; + pci_addr.s.dev = devfn >> 3; + pci_addr.s.func = devfn & 0x7; + pci_addr.s.reg = reg; + +#if PCI_CONFIG_SPACE_DELAY + udelay(PCI_CONFIG_SPACE_DELAY); +#endif + switch (size) { + case 4: + *val = le32_to_cpu(cvmx_read64_uint32(pci_addr.u64)); + return PCIBIOS_SUCCESSFUL; + case 2: + *val = le16_to_cpu(cvmx_read64_uint16(pci_addr.u64)); + return PCIBIOS_SUCCESSFUL; + case 1: + *val = cvmx_read64_uint8(pci_addr.u64); + return PCIBIOS_SUCCESSFUL; + } + return PCIBIOS_FUNC_NOT_SUPPORTED; +} + + +/** + * Write a value to PCI configuration space + * + * @bus: + * @devfn: + * @reg: + * @size: + * @val: + * Returns + */ +static int octeon_write_config(struct pci_bus *bus, unsigned int devfn, + int reg, int size, u32 val) +{ + union octeon_pci_address pci_addr; + + pci_addr.u64 = 0; + pci_addr.s.upper = 2; + pci_addr.s.io = 1; + pci_addr.s.did = 3; + pci_addr.s.subdid = 1; + pci_addr.s.endian_swap = 1; + pci_addr.s.bus = bus->number; + pci_addr.s.dev = devfn >> 3; + pci_addr.s.func = devfn & 0x7; + pci_addr.s.reg = reg; + +#if PCI_CONFIG_SPACE_DELAY + udelay(PCI_CONFIG_SPACE_DELAY); +#endif + switch (size) { + case 4: + cvmx_write64_uint32(pci_addr.u64, cpu_to_le32(val)); + return PCIBIOS_SUCCESSFUL; + case 2: + cvmx_write64_uint16(pci_addr.u64, cpu_to_le16(val)); + return PCIBIOS_SUCCESSFUL; + case 1: + cvmx_write64_uint8(pci_addr.u64, val); + return PCIBIOS_SUCCESSFUL; + } + return PCIBIOS_FUNC_NOT_SUPPORTED; +} + + +static struct pci_ops octeon_pci_ops = { + octeon_read_config, + octeon_write_config, +}; + +static struct resource octeon_pci_mem_resource = { + .start = 0, + .end = 0, + .name = "Octeon PCI MEM", + .flags = IORESOURCE_MEM, +}; + +/* + * PCI ports must be above 16KB so the ISA bus filtering in the PCI-X to PCI + * bridge + */ +static struct resource octeon_pci_io_resource = { + .start = 0x4000, + .end = OCTEON_PCI_IOSPACE_SIZE - 1, + .name = "Octeon PCI IO", + .flags = IORESOURCE_IO, +}; + +static struct pci_controller octeon_pci_controller = { + .pci_ops = &octeon_pci_ops, + .mem_resource = &octeon_pci_mem_resource, + .mem_offset = OCTEON_PCI_MEMSPACE_OFFSET, + .io_resource = &octeon_pci_io_resource, + .io_offset = 0, + .io_map_base = OCTEON_PCI_IOSPACE_BASE, +}; + + +/** + * Low level initialize the Octeon PCI controller + * + * Returns + */ +static void octeon_pci_initialize(void) +{ + union cvmx_pci_cfg01 cfg01; + union cvmx_npi_ctl_status ctl_status; + union cvmx_pci_ctl_status_2 ctl_status_2; + union cvmx_pci_cfg19 cfg19; + union cvmx_pci_cfg16 cfg16; + union cvmx_pci_cfg22 cfg22; + union cvmx_pci_cfg56 cfg56; + + /* Reset the PCI Bus */ + cvmx_write_csr(CVMX_CIU_SOFT_PRST, 0x1); + cvmx_read_csr(CVMX_CIU_SOFT_PRST); + + udelay(2000); /* Hold PCI reset for 2 ms */ + + ctl_status.u64 = 0; /* cvmx_read_csr(CVMX_NPI_CTL_STATUS); */ + ctl_status.s.max_word = 1; + ctl_status.s.timer = 1; + cvmx_write_csr(CVMX_NPI_CTL_STATUS, ctl_status.u64); + + /* Deassert PCI reset and advertize PCX Host Mode Device Capability + (64b) */ + cvmx_write_csr(CVMX_CIU_SOFT_PRST, 0x4); + cvmx_read_csr(CVMX_CIU_SOFT_PRST); + + udelay(2000); /* Wait 2 ms after deasserting PCI reset */ + + ctl_status_2.u32 = 0; + ctl_status_2.s.tsr_hwm = 1; /* Initializes to 0. Must be set + before any PCI reads. */ + ctl_status_2.s.bar2pres = 1; /* Enable BAR2 */ + ctl_status_2.s.bar2_enb = 1; + ctl_status_2.s.bar2_cax = 1; /* Don't use L2 */ + ctl_status_2.s.bar2_esx = 1; + ctl_status_2.s.pmo_amod = 1; /* Round robin priority */ + if (octeon_dma_bar_type == OCTEON_DMA_BAR_TYPE_BIG) { + /* BAR1 hole */ + ctl_status_2.s.bb1_hole = OCTEON_PCI_BAR1_HOLE_BITS; + ctl_status_2.s.bb1_siz = 1; /* BAR1 is 2GB */ + ctl_status_2.s.bb_ca = 1; /* Don't use L2 with big bars */ + ctl_status_2.s.bb_es = 1; /* Big bar in byte swap mode */ + ctl_status_2.s.bb1 = 1; /* BAR1 is big */ + ctl_status_2.s.bb0 = 1; /* BAR0 is big */ + } + + octeon_npi_write32(CVMX_NPI_PCI_CTL_STATUS_2, ctl_status_2.u32); + udelay(2000); /* Wait 2 ms before doing PCI reads */ + + ctl_status_2.u32 = octeon_npi_read32(CVMX_NPI_PCI_CTL_STATUS_2); + pr_notice("PCI Status: %s %s-bit\n", + ctl_status_2.s.ap_pcix ? "PCI-X" : "PCI", + ctl_status_2.s.ap_64ad ? "64" : "32"); + + if (OCTEON_IS_MODEL(OCTEON_CN58XX) || OCTEON_IS_MODEL(OCTEON_CN50XX)) { + union cvmx_pci_cnt_reg cnt_reg_start; + union cvmx_pci_cnt_reg cnt_reg_end; + unsigned long cycles, pci_clock; + + cnt_reg_start.u64 = cvmx_read_csr(CVMX_NPI_PCI_CNT_REG); + cycles = read_c0_cvmcount(); + udelay(1000); + cnt_reg_end.u64 = cvmx_read_csr(CVMX_NPI_PCI_CNT_REG); + cycles = read_c0_cvmcount() - cycles; + pci_clock = (cnt_reg_end.s.pcicnt - cnt_reg_start.s.pcicnt) / + (cycles / (mips_hpt_frequency / 1000000)); + pr_notice("PCI Clock: %lu MHz\n", pci_clock); + } + + /* + * TDOMC must be set to one in PCI mode. TDOMC should be set to 4 + * in PCI-X mode to allow four oustanding splits. Otherwise, + * should not change from its reset value. Don't write PCI_CFG19 + * in PCI mode (0x82000001 reset value), write it to 0x82000004 + * after PCI-X mode is known. MRBCI,MDWE,MDRE -> must be zero. + * MRBCM -> must be one. + */ + if (ctl_status_2.s.ap_pcix) { + cfg19.u32 = 0; + /* + * Target Delayed/Split request outstanding maximum + * count. [1..31] and 0=32. NOTE: If the user + * programs these bits beyond the Designed Maximum + * outstanding count, then the designed maximum table + * depth will be used instead. No additional + * Deferred/Split transactions will be accepted if + * this outstanding maximum count is + * reached. Furthermore, no additional deferred/split + * transactions will be accepted if the I/O delay/ I/O + * Split Request outstanding maximum is reached. + */ + cfg19.s.tdomc = 4; + /* + * Master Deferred Read Request Outstanding Max Count + * (PCI only). CR4C[26:24] Max SAC cycles MAX DAC + * cycles 000 8 4 001 1 0 010 2 1 011 3 1 100 4 2 101 + * 5 2 110 6 3 111 7 3 For example, if these bits are + * programmed to 100, the core can support 2 DAC + * cycles, 4 SAC cycles or a combination of 1 DAC and + * 2 SAC cycles. NOTE: For the PCI-X maximum + * outstanding split transactions, refer to + * CRE0[22:20]. + */ + cfg19.s.mdrrmc = 2; + /* + * Master Request (Memory Read) Byte Count/Byte Enable + * select. 0 = Byte Enables valid. In PCI mode, a + * burst transaction cannot be performed using Memory + * Read command=4?h6. 1 = DWORD Byte Count valid + * (default). In PCI Mode, the memory read byte + * enables are automatically generated by the + * core. Note: N3 Master Request transaction sizes are + * always determined through the + * am_attr[<35:32>|<7:0>] field. + */ + cfg19.s.mrbcm = 1; + octeon_npi_write32(CVMX_NPI_PCI_CFG19, cfg19.u32); + } + + + cfg01.u32 = 0; + cfg01.s.msae = 1; /* Memory Space Access Enable */ + cfg01.s.me = 1; /* Master Enable */ + cfg01.s.pee = 1; /* PERR# Enable */ + cfg01.s.see = 1; /* System Error Enable */ + cfg01.s.fbbe = 1; /* Fast Back to Back Transaction Enable */ + + octeon_npi_write32(CVMX_NPI_PCI_CFG01, cfg01.u32); + +#ifdef USE_OCTEON_INTERNAL_ARBITER + /* + * When OCTEON is a PCI host, most systems will use OCTEON's + * internal arbiter, so must enable it before any PCI/PCI-X + * traffic can occur. + */ + { + union cvmx_npi_pci_int_arb_cfg pci_int_arb_cfg; + + pci_int_arb_cfg.u64 = 0; + pci_int_arb_cfg.s.en = 1; /* Internal arbiter enable */ + cvmx_write_csr(CVMX_NPI_PCI_INT_ARB_CFG, pci_int_arb_cfg.u64); + } +#endif /* USE_OCTEON_INTERNAL_ARBITER */ + + /* + * Preferrably written to 1 to set MLTD. [RDSATI,TRTAE, + * TWTAE,TMAE,DPPMR -> must be zero. TILT -> must not be set to + * 1..7. + */ + cfg16.u32 = 0; + cfg16.s.mltd = 1; /* Master Latency Timer Disable */ + octeon_npi_write32(CVMX_NPI_PCI_CFG16, cfg16.u32); + + /* + * Should be written to 0x4ff00. MTTV -> must be zero. + * FLUSH -> must be 1. MRV -> should be 0xFF. + */ + cfg22.u32 = 0; + /* Master Retry Value [1..255] and 0=infinite */ + cfg22.s.mrv = 0xff; + /* + * AM_DO_FLUSH_I control NOTE: This bit MUST BE ONE for proper + * N3K operation. + */ + cfg22.s.flush = 1; + octeon_npi_write32(CVMX_NPI_PCI_CFG22, cfg22.u32); + + /* + * MOST Indicates the maximum number of outstanding splits (in -1 + * notation) when OCTEON is in PCI-X mode. PCI-X performance is + * affected by the MOST selection. Should generally be written + * with one of 0x3be807, 0x2be807, 0x1be807, or 0x0be807, + * depending on the desired MOST of 3, 2, 1, or 0, respectively. + */ + cfg56.u32 = 0; + cfg56.s.pxcid = 7; /* RO - PCI-X Capability ID */ + cfg56.s.ncp = 0xe8; /* RO - Next Capability Pointer */ + cfg56.s.dpere = 1; /* Data Parity Error Recovery Enable */ + cfg56.s.roe = 1; /* Relaxed Ordering Enable */ + cfg56.s.mmbc = 1; /* Maximum Memory Byte Count + [0=512B,1=1024B,2=2048B,3=4096B] */ + cfg56.s.most = 3; /* Maximum outstanding Split transactions [0=1 + .. 7=32] */ + + octeon_npi_write32(CVMX_NPI_PCI_CFG56, cfg56.u32); + + /* + * Affects PCI performance when OCTEON services reads to its + * BAR1/BAR2. Refer to Section 10.6.1. The recommended values are + * 0x22, 0x33, and 0x33 for PCI_READ_CMD_6, PCI_READ_CMD_C, and + * PCI_READ_CMD_E, respectively. Unfortunately due to errata DDR-700, + * these values need to be changed so they won't possibly prefetch off + * of the end of memory if PCI is DMAing a buffer at the end of + * memory. Note that these values differ from their reset values. + */ + octeon_npi_write32(CVMX_NPI_PCI_READ_CMD_6, 0x21); + octeon_npi_write32(CVMX_NPI_PCI_READ_CMD_C, 0x31); + octeon_npi_write32(CVMX_NPI_PCI_READ_CMD_E, 0x31); +} + + +/** + * Initialize the Octeon PCI controller + * + * Returns + */ +static int __init octeon_pci_setup(void) +{ + union cvmx_npi_mem_access_subidx mem_access; + int index; + + /* Only these chips have PCI */ + if (octeon_has_feature(OCTEON_FEATURE_PCIE)) + return 0; + + /* Point pcibios_map_irq() to the PCI version of it */ + octeon_pcibios_map_irq = octeon_pci_pcibios_map_irq; + + /* Only use the big bars on chips that support it */ + if (OCTEON_IS_MODEL(OCTEON_CN31XX) || + OCTEON_IS_MODEL(OCTEON_CN38XX_PASS2) || + OCTEON_IS_MODEL(OCTEON_CN38XX_PASS1)) + octeon_dma_bar_type = OCTEON_DMA_BAR_TYPE_SMALL; + else + octeon_dma_bar_type = OCTEON_DMA_BAR_TYPE_BIG; + + /* PCI I/O and PCI MEM values */ + set_io_port_base(OCTEON_PCI_IOSPACE_BASE); + ioport_resource.start = 0; + ioport_resource.end = OCTEON_PCI_IOSPACE_SIZE - 1; + if (!octeon_is_pci_host()) { + pr_notice("Not in host mode, PCI Controller not initialized\n"); + return 0; + } + + pr_notice("%s Octeon big bar support\n", + (octeon_dma_bar_type == + OCTEON_DMA_BAR_TYPE_BIG) ? "Enabling" : "Disabling"); + + octeon_pci_initialize(); + + mem_access.u64 = 0; + mem_access.s.esr = 1; /* Endian-Swap on read. */ + mem_access.s.esw = 1; /* Endian-Swap on write. */ + mem_access.s.nsr = 0; /* No-Snoop on read. */ + mem_access.s.nsw = 0; /* No-Snoop on write. */ + mem_access.s.ror = 0; /* Relax Read on read. */ + mem_access.s.row = 0; /* Relax Order on write. */ + mem_access.s.ba = 0; /* PCI Address bits [63:36]. */ + cvmx_write_csr(CVMX_NPI_MEM_ACCESS_SUBID3, mem_access.u64); + + /* + * Remap the Octeon BAR 2 above all 32 bit devices + * (0x8000000000ul). This is done here so it is remapped + * before the readl()'s below. We don't want BAR2 overlapping + * with BAR0/BAR1 during these reads. + */ + octeon_npi_write32(CVMX_NPI_PCI_CFG08, 0); + octeon_npi_write32(CVMX_NPI_PCI_CFG09, 0x80); + + /* Disable the BAR1 movable mappings */ + for (index = 0; index < 32; index++) + octeon_npi_write32(CVMX_NPI_PCI_BAR1_INDEXX(index), 0); + + if (octeon_dma_bar_type == OCTEON_DMA_BAR_TYPE_BIG) { + /* Remap the Octeon BAR 0 to 0-2GB */ + octeon_npi_write32(CVMX_NPI_PCI_CFG04, 0); + octeon_npi_write32(CVMX_NPI_PCI_CFG05, 0); + + /* + * Remap the Octeon BAR 1 to map 2GB-4GB (minus the + * BAR 1 hole). + */ + octeon_npi_write32(CVMX_NPI_PCI_CFG06, 2ul << 30); + octeon_npi_write32(CVMX_NPI_PCI_CFG07, 0); + + /* Devices go after BAR1 */ + octeon_pci_mem_resource.start = + OCTEON_PCI_MEMSPACE_OFFSET + (4ul << 30) - + (OCTEON_PCI_BAR1_HOLE_SIZE << 20); + octeon_pci_mem_resource.end = + octeon_pci_mem_resource.start + (1ul << 30); + } else { + /* Remap the Octeon BAR 0 to map 128MB-(128MB+4KB) */ + octeon_npi_write32(CVMX_NPI_PCI_CFG04, 128ul << 20); + octeon_npi_write32(CVMX_NPI_PCI_CFG05, 0); + + /* Remap the Octeon BAR 1 to map 0-128MB */ + octeon_npi_write32(CVMX_NPI_PCI_CFG06, 0); + octeon_npi_write32(CVMX_NPI_PCI_CFG07, 0); + + /* Devices go after BAR0 */ + octeon_pci_mem_resource.start = + OCTEON_PCI_MEMSPACE_OFFSET + (128ul << 20) + + (4ul << 10); + octeon_pci_mem_resource.end = + octeon_pci_mem_resource.start + (1ul << 30); + } + + register_pci_controller(&octeon_pci_controller); + + /* + * Clear any errors that might be pending from before the bus + * was setup properly. + */ + cvmx_write_csr(CVMX_NPI_PCI_INT_SUM2, -1); + return 0; +} + +arch_initcall(octeon_pci_setup); diff --git a/arch/mips/cavium-octeon/pcie.c b/arch/mips/cavium-octeon/pcie.c new file mode 100644 index 0000000..49d1408 --- /dev/null +++ b/arch/mips/cavium-octeon/pcie.c @@ -0,0 +1,1370 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2007, 2008 Cavium Networks + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/interrupt.h> +#include <linux/time.h> +#include <linux/delay.h> + +#include <asm/octeon/octeon.h> +#include <asm/octeon/cvmx-npei-defs.h> +#include <asm/octeon/cvmx-pciercx-defs.h> +#include <asm/octeon/cvmx-pescx-defs.h> +#include <asm/octeon/cvmx-pexp-defs.h> +#include <asm/octeon/cvmx-helper-errata.h> + +#include "pci-common.h" + +union cvmx_pcie_address { + uint64_t u64; + struct { + uint64_t upper:2; /* Normally 2 for XKPHYS */ + uint64_t reserved_49_61:13; /* Must be zero */ + uint64_t io:1; /* 1 for IO space access */ + uint64_t did:5; /* PCIe DID = 3 */ + uint64_t subdid:3; /* PCIe SubDID = 1 */ + uint64_t reserved_36_39:4; /* Must be zero */ + uint64_t es:2; /* Endian swap = 1 */ + uint64_t port:2; /* PCIe port 0,1 */ + uint64_t reserved_29_31:3; /* Must be zero */ + /* + * Selects the type of the configuration request (0 = type 0, + * 1 = type 1). + */ + uint64_t ty:1; + /* Target bus number sent in the ID in the request. */ + uint64_t bus:8; + /* + * Target device number sent in the ID in the + * request. Note that Dev must be zero for type 0 + * configuration requests. + */ + uint64_t dev:5; + /* Target function number sent in the ID in the request. */ + uint64_t func:3; + /* + * Selects a register in the configuration space of + * the target. + */ + uint64_t reg:12; + } config; + struct { + uint64_t upper:2; /* Normally 2 for XKPHYS */ + uint64_t reserved_49_61:13; /* Must be zero */ + uint64_t io:1; /* 1 for IO space access */ + uint64_t did:5; /* PCIe DID = 3 */ + uint64_t subdid:3; /* PCIe SubDID = 2 */ + uint64_t reserved_36_39:4; /* Must be zero */ + uint64_t es:2; /* Endian swap = 1 */ + uint64_t port:2; /* PCIe port 0,1 */ + uint64_t address:32; /* PCIe IO address */ + } io; + struct { + uint64_t upper:2; /* Normally 2 for XKPHYS */ + uint64_t reserved_49_61:13; /* Must be zero */ + uint64_t io:1; /* 1 for IO space access */ + uint64_t did:5; /* PCIe DID = 3 */ + uint64_t subdid:3; /* PCIe SubDID = 3-6 */ + uint64_t reserved_36_39:4; /* Must be zero */ + uint64_t address:36; /* PCIe Mem address */ + } mem; +}; + +/** + * Return the Core virtual base address for PCIe IO access. IOs are + * read/written as an offset from this address. + * + * @pcie_port: PCIe port the IO is for + * + * Returns 64bit Octeon IO base address for read/write + */ +static inline uint64_t cvmx_pcie_get_io_base_address(int pcie_port) +{ + union cvmx_pcie_address pcie_addr; + pcie_addr.u64 = 0; + pcie_addr.io.upper = 0; + pcie_addr.io.io = 1; + pcie_addr.io.did = 3; + pcie_addr.io.subdid = 2; + pcie_addr.io.es = 1; + pcie_addr.io.port = pcie_port; + return pcie_addr.u64; +} + +/** + * Size of the IO address region returned at address + * cvmx_pcie_get_io_base_address() + * + * @pcie_port: PCIe port the IO is for + * + * Returns Size of the IO window + */ +static inline uint64_t cvmx_pcie_get_io_size(int pcie_port) +{ + return 1ull << 32; +} + +/** + * Return the Core virtual base address for PCIe MEM access. Memory is + * read/written as an offset from this address. + * + * @pcie_port: PCIe port the IO is for + * + * Returns 64bit Octeon IO base address for read/write + */ +static inline uint64_t cvmx_pcie_get_mem_base_address(int pcie_port) +{ + union cvmx_pcie_address pcie_addr; + pcie_addr.u64 = 0; + pcie_addr.mem.upper = 0; + pcie_addr.mem.io = 1; + pcie_addr.mem.did = 3; + pcie_addr.mem.subdid = 3 + pcie_port; + return pcie_addr.u64; +} + +/** + * Size of the Mem address region returned at address + * cvmx_pcie_get_mem_base_address() + * + * @pcie_port: PCIe port the IO is for + * + * Returns Size of the Mem window + */ +static inline uint64_t cvmx_pcie_get_mem_size(int pcie_port) +{ + return 1ull << 36; +} + +/** + * Read a PCIe config space register indirectly. This is used for + * registers of the form PCIEEP_CFG??? and PCIERC?_CFG???. + * + * @pcie_port: PCIe port to read from + * @cfg_offset: Address to read + * + * Returns Value read + */ +static uint32_t cvmx_pcie_cfgx_read(int pcie_port, uint32_t cfg_offset) +{ + union cvmx_pescx_cfg_rd pescx_cfg_rd; + pescx_cfg_rd.u64 = 0; + pescx_cfg_rd.s.addr = cfg_offset; + cvmx_write_csr(CVMX_PESCX_CFG_RD(pcie_port), pescx_cfg_rd.u64); + pescx_cfg_rd.u64 = cvmx_read_csr(CVMX_PESCX_CFG_RD(pcie_port)); + return pescx_cfg_rd.s.data; +} + +/** + * Write a PCIe config space register indirectly. This is used for + * registers of the form PCIEEP_CFG??? and PCIERC?_CFG???. + * + * @pcie_port: PCIe port to write to + * @cfg_offset: Address to write + * @val: Value to write + */ +static void cvmx_pcie_cfgx_write(int pcie_port, uint32_t cfg_offset, + uint32_t val) +{ + union cvmx_pescx_cfg_wr pescx_cfg_wr; + pescx_cfg_wr.u64 = 0; + pescx_cfg_wr.s.addr = cfg_offset; + pescx_cfg_wr.s.data = val; + cvmx_write_csr(CVMX_PESCX_CFG_WR(pcie_port), pescx_cfg_wr.u64); +} + +/** + * Build a PCIe config space request address for a device + * + * @pcie_port: PCIe port to access + * @bus: Sub bus + * @dev: Device ID + * @fn: Device sub function + * @reg: Register to access + * + * Returns 64bit Octeon IO address + */ +static inline uint64_t __cvmx_pcie_build_config_addr(int pcie_port, int bus, + int dev, int fn, int reg) +{ + union cvmx_pcie_address pcie_addr; + union cvmx_pciercx_cfg006 pciercx_cfg006; + + pciercx_cfg006.u32 = + cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG006(pcie_port)); + if ((bus <= pciercx_cfg006.s.pbnum) && (dev != 0)) + return 0; + + pcie_addr.u64 = 0; + pcie_addr.config.upper = 2; + pcie_addr.config.io = 1; + pcie_addr.config.did = 3; + pcie_addr.config.subdid = 1; + pcie_addr.config.es = 1; + pcie_addr.config.port = pcie_port; + pcie_addr.config.ty = (bus > pciercx_cfg006.s.pbnum); + pcie_addr.config.bus = bus; + pcie_addr.config.dev = dev; + pcie_addr.config.func = fn; + pcie_addr.config.reg = reg; + return pcie_addr.u64; +} + +/** + * Read 8bits from a Device's config space + * + * @pcie_port: PCIe port the device is on + * @bus: Sub bus + * @dev: Device ID + * @fn: Device sub function + * @reg: Register to access + * + * Returns Result of the read + */ +static uint8_t cvmx_pcie_config_read8(int pcie_port, int bus, int dev, + int fn, int reg) +{ + uint64_t address = + __cvmx_pcie_build_config_addr(pcie_port, bus, dev, fn, reg); + if (address) + return cvmx_read64_uint8(address); + else + return 0xff; +} + +/** + * Read 16bits from a Device's config space + * + * @pcie_port: PCIe port the device is on + * @bus: Sub bus + * @dev: Device ID + * @fn: Device sub function + * @reg: Register to access + * + * Returns Result of the read + */ +static uint16_t cvmx_pcie_config_read16(int pcie_port, int bus, int dev, + int fn, int reg) +{ + uint64_t address = + __cvmx_pcie_build_config_addr(pcie_port, bus, dev, fn, reg); + if (address) + return le16_to_cpu(cvmx_read64_uint16(address)); + else + return 0xffff; +} + +/** + * Read 32bits from a Device's config space + * + * @pcie_port: PCIe port the device is on + * @bus: Sub bus + * @dev: Device ID + * @fn: Device sub function + * @reg: Register to access + * + * Returns Result of the read + */ +static uint32_t cvmx_pcie_config_read32(int pcie_port, int bus, int dev, + int fn, int reg) +{ + uint64_t address = + __cvmx_pcie_build_config_addr(pcie_port, bus, dev, fn, reg); + if (address) + return le32_to_cpu(cvmx_read64_uint32(address)); + else + return 0xffffffff; +} + +/** + * Write 8bits to a Device's config space + * + * @pcie_port: PCIe port the device is on + * @bus: Sub bus + * @dev: Device ID + * @fn: Device sub function + * @reg: Register to access + * @val: Value to write + */ +static void cvmx_pcie_config_write8(int pcie_port, int bus, int dev, int fn, + int reg, uint8_t val) +{ + uint64_t address = + __cvmx_pcie_build_config_addr(pcie_port, bus, dev, fn, reg); + if (address) + cvmx_write64_uint8(address, val); +} + +/** + * Write 16bits to a Device's config space + * + * @pcie_port: PCIe port the device is on + * @bus: Sub bus + * @dev: Device ID + * @fn: Device sub function + * @reg: Register to access + * @val: Value to write + */ +static void cvmx_pcie_config_write16(int pcie_port, int bus, int dev, int fn, + int reg, uint16_t val) +{ + uint64_t address = + __cvmx_pcie_build_config_addr(pcie_port, bus, dev, fn, reg); + if (address) + cvmx_write64_uint16(address, cpu_to_le16(val)); +} + +/** + * Write 32bits to a Device's config space + * + * @pcie_port: PCIe port the device is on + * @bus: Sub bus + * @dev: Device ID + * @fn: Device sub function + * @reg: Register to access + * @val: Value to write + */ +static void cvmx_pcie_config_write32(int pcie_port, int bus, int dev, int fn, + int reg, uint32_t val) +{ + uint64_t address = + __cvmx_pcie_build_config_addr(pcie_port, bus, dev, fn, reg); + if (address) + cvmx_write64_uint32(address, cpu_to_le32(val)); +} + +/** + * Initialize the RC config space CSRs + * + * @pcie_port: PCIe port to initialize + */ +static void __cvmx_pcie_rc_initialize_config_space(int pcie_port) +{ + union cvmx_pciercx_cfg030 pciercx_cfg030; + union cvmx_npei_ctl_status2 npei_ctl_status2; + union cvmx_pciercx_cfg070 pciercx_cfg070; + union cvmx_pciercx_cfg001 pciercx_cfg001; + union cvmx_pciercx_cfg032 pciercx_cfg032; + union cvmx_pciercx_cfg006 pciercx_cfg006; + union cvmx_pciercx_cfg008 pciercx_cfg008; + union cvmx_pciercx_cfg009 pciercx_cfg009; + union cvmx_pciercx_cfg010 pciercx_cfg010; + union cvmx_pciercx_cfg011 pciercx_cfg011; + union cvmx_pciercx_cfg035 pciercx_cfg035; + union cvmx_pciercx_cfg075 pciercx_cfg075; + union cvmx_pciercx_cfg034 pciercx_cfg034; + + /* Max Payload Size (PCIE*_CFG030[MPS]) */ + /* Max Read Request Size (PCIE*_CFG030[MRRS]) */ + /* Relaxed-order, no-snoop enables (PCIE*_CFG030[RO_EN,NS_EN] */ + /* Error Message Enables (PCIE*_CFG030[CE_EN,NFE_EN,FE_EN,UR_EN]) */ + pciercx_cfg030.u32 = + cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG030(pcie_port)); + /* + * Max payload size = 128 bytes for best Octeon DMA + * performance. + */ + pciercx_cfg030.s.mps = 0; + /* + * Max read request size = 128 bytes for best Octeon DMA + * performance. + */ + pciercx_cfg030.s.mrrs = 0; + /* Enable relaxed ordering. */ + pciercx_cfg030.s.ro_en = 1; + /* Enable no snoop. */ + pciercx_cfg030.s.ns_en = 1; + /* Correctable error reporting enable. */ + pciercx_cfg030.s.ce_en = 1; + /* Non-fatal error reporting enable. */ + pciercx_cfg030.s.nfe_en = 1; + /* Fatal error reporting enable. */ + pciercx_cfg030.s.fe_en = 1; + /* Unsupported request reporting enable. */ + pciercx_cfg030.s.ur_en = 1; + cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG030(pcie_port), + pciercx_cfg030.u32); + + /* + * Max Payload Size (NPEI_CTL_STATUS2[MPS]) must match + * PCIE*_CFG030[MPS] + * + * Max Read Request Size (NPEI_CTL_STATUS2[MRRS]) must not + * exceed PCIE*_CFG030[MRRS]. + */ + npei_ctl_status2.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_CTL_STATUS2); + /* Max payload size = 128 bytes for best Octeon DMA performance */ + npei_ctl_status2.s.mps = 0; + /* Max read request size = 128 bytes for best Octeon DMA performance */ + npei_ctl_status2.s.mrrs = 0; + cvmx_write_csr(CVMX_PEXP_NPEI_CTL_STATUS2, npei_ctl_status2.u64); + + /* ECRC Generation (PCIE*_CFG070[GE,CE]) */ + pciercx_cfg070.u32 = + cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG070(pcie_port)); + pciercx_cfg070.s.ge = 1; /* ECRC generation enable. */ + pciercx_cfg070.s.ce = 1; /* ECRC check enable. */ + cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG070(pcie_port), + pciercx_cfg070.u32); + + /* + * Access Enables (PCIE*_CFG001[MSAE,ME]) ME and MSAE should + * always be set. + * + * Interrupt Disable (PCIE*_CFG001[I_DIS]) System Error + * Message Enable (PCIE*_CFG001[SEE]) + */ + pciercx_cfg001.u32 = + cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG001(pcie_port)); + pciercx_cfg001.s.msae = 1; /* Memory space enable. */ + pciercx_cfg001.s.me = 1; /* Bus master enable. */ + pciercx_cfg001.s.i_dis = 1; /* INTx assertion disable. */ + pciercx_cfg001.s.see = 1; /* SERR# enable */ + cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG001(pcie_port), + pciercx_cfg001.u32); + + /* Advanced Error Recovery Message Enables */ + /* (PCIE*_CFG066,PCIE*_CFG067,PCIE*_CFG069) */ + cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG066(pcie_port), 0); + /* Use CVMX_PCIERCX_CFG067 hardware default */ + cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG069(pcie_port), 0); + + /* Active State Power Management (PCIE*_CFG032[ASLPC]) */ + pciercx_cfg032.u32 = + cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG032(pcie_port)); + pciercx_cfg032.s.aslpc = 0; /* Active state Link PM control. */ + cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG032(pcie_port), + pciercx_cfg032.u32); + + /* Entrance Latencies (PCIE*_CFG451[L0EL,L1EL]) */ + + /* + * Link Width Mode (PCIERCn_CFG452[LME]) - Set during + * cvmx_pcie_rc_initialize_link() + * + * Primary Bus Number (PCIERCn_CFG006[PBNUM]) + * + * We set the primary bus number to 1 so IDT bridges are + * happy. They don't like zero. + */ + pciercx_cfg006.u32 = 0; + pciercx_cfg006.s.pbnum = 1; + pciercx_cfg006.s.sbnum = 1; + pciercx_cfg006.s.subbnum = 1; + cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG006(pcie_port), + pciercx_cfg006.u32); + + /* + * Memory-mapped I/O BAR (PCIERCn_CFG008) + * Most applications should disable the memory-mapped I/O BAR by + * setting PCIERCn_CFG008[ML_ADDR] < PCIERCn_CFG008[MB_ADDR] + */ + pciercx_cfg008.u32 = 0; + pciercx_cfg008.s.mb_addr = 0x100; + pciercx_cfg008.s.ml_addr = 0; + cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG008(pcie_port), + pciercx_cfg008.u32); + + /* + * Prefetchable BAR (PCIERCn_CFG009,PCIERCn_CFG010,PCIERCn_CFG011) + * Most applications should disable the prefetchable BAR by setting + * PCIERCn_CFG011[UMEM_LIMIT],PCIERCn_CFG009[LMEM_LIMIT] < + * PCIERCn_CFG010[UMEM_BASE],PCIERCn_CFG009[LMEM_BASE] + */ + pciercx_cfg009.u32 = + cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG009(pcie_port)); + pciercx_cfg010.u32 = + cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG010(pcie_port)); + pciercx_cfg011.u32 = + cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG011(pcie_port)); + pciercx_cfg009.s.lmem_base = 0x100; + pciercx_cfg009.s.lmem_limit = 0; + pciercx_cfg010.s.umem_base = 0x100; + pciercx_cfg011.s.umem_limit = 0; + cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG009(pcie_port), + pciercx_cfg009.u32); + cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG010(pcie_port), + pciercx_cfg010.u32); + cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG011(pcie_port), + pciercx_cfg011.u32); + + /* + * System Error Interrupt Enables (PCIERCn_CFG035[SECEE,SEFEE,SENFEE]) + * PME Interrupt Enables (PCIERCn_CFG035[PMEIE]) + */ + pciercx_cfg035.u32 = + cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG035(pcie_port)); + /* System error on correctable error enable. */ + pciercx_cfg035.s.secee = 1; + /* System error on fatal error enable. */ + pciercx_cfg035.s.sefee = 1; + /* System error on non-fatal error enable. */ + pciercx_cfg035.s.senfee = 1; + /* PME interrupt enable. */ + pciercx_cfg035.s.pmeie = 1; + cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG035(pcie_port), + pciercx_cfg035.u32); + + /* + * Advanced Error Recovery Interrupt Enables + * (PCIERCn_CFG075[CERE,NFERE,FERE]) + */ + pciercx_cfg075.u32 = + cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG075(pcie_port)); + /* Correctable error reporting enable. */ + pciercx_cfg075.s.cere = 1; + /* Non-fatal error reporting enable. */ + pciercx_cfg075.s.nfere = 1; + /* Fatal error reporting enable. */ + pciercx_cfg075.s.fere = 1; + cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG075(pcie_port), + pciercx_cfg075.u32); + + /* HP Interrupt Enables (PCIERCn_CFG034[HPINT_EN], + * PCIERCn_CFG034[DLLS_EN,CCINT_EN]) + */ + pciercx_cfg034.u32 = + cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG034(pcie_port)); + /* Hot-plug interrupt enable. */ + pciercx_cfg034.s.hpint_en = 1; + /* Data Link Layer state changed enable */ + pciercx_cfg034.s.dlls_en = 1; + /* Command completed interrupt enable. */ + pciercx_cfg034.s.ccint_en = 1; + cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG034(pcie_port), + pciercx_cfg034.u32); +} + +/** + * Initialize a host mode PCIe link. This function takes a PCIe + * port from reset to a link up state. Software can then begin + * configuring the rest of the link. + * + * @pcie_port: PCIe port to initialize + * + * Returns Zero on success + */ +static int __cvmx_pcie_rc_initialize_link(int pcie_port) +{ + uint64_t start_cycle; + union cvmx_pescx_ctl_status pescx_ctl_status; + union cvmx_pciercx_cfg452 pciercx_cfg452; + union cvmx_pciercx_cfg032 pciercx_cfg032; + union cvmx_pciercx_cfg448 pciercx_cfg448; + + /* Set the lane width */ + pciercx_cfg452.u32 = + cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG452(pcie_port)); + pescx_ctl_status.u64 = cvmx_read_csr(CVMX_PESCX_CTL_STATUS(pcie_port)); + if (pescx_ctl_status.s.qlm_cfg == 0) { + /* We're in 8 lane (56XX) or 4 lane (54XX) mode */ + pciercx_cfg452.s.lme = 0xf; + } else { + /* We're in 4 lane (56XX) or 2 lane (52XX) mode */ + pciercx_cfg452.s.lme = 0x7; + } + cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG452(pcie_port), + pciercx_cfg452.u32); + + /* + * CN52XX pass 1.x has an errata where length mismatches on UR + * responses can cause bus errors on 64bit memory + * reads. Turning off length error checking fixes this. + */ + if (OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_X)) { + union cvmx_pciercx_cfg455 pciercx_cfg455; + pciercx_cfg455.u32 = + cvmx_pcie_cfgx_read(pcie_port, + CVMX_PCIERCX_CFG455(pcie_port)); + pciercx_cfg455.s.m_cpl_len_err = 1; + cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG455(pcie_port), + pciercx_cfg455.u32); + } + + /* Lane swap needs to be manually enabled for CN52XX */ + if (OCTEON_IS_MODEL(OCTEON_CN52XX) && (pcie_port == 1)) { + pescx_ctl_status.s.lane_swp = 1; + cvmx_write_csr(CVMX_PESCX_CTL_STATUS(pcie_port), + pescx_ctl_status.u64); + } + + /* Bring up the link */ + pescx_ctl_status.u64 = cvmx_read_csr(CVMX_PESCX_CTL_STATUS(pcie_port)); + pescx_ctl_status.s.lnk_enb = 1; + cvmx_write_csr(CVMX_PESCX_CTL_STATUS(pcie_port), pescx_ctl_status.u64); + + /* + * CN52XX pass 1.0: Due to a bug in 2nd order CDR, it needs to + * be disabled. + */ + if (OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_0)) + __cvmx_helper_errata_qlm_disable_2nd_order_cdr(0); + + /* Wait for the link to come up */ + cvmx_dprintf("PCIe: Waiting for port %d link\n", pcie_port); + start_cycle = cvmx_get_cycle(); + do { + if (cvmx_get_cycle() - start_cycle > + 2 * cvmx_sysinfo_get()->cpu_clock_hz) { + cvmx_dprintf("PCIe: Port %d link timeout\n", + pcie_port); + return -1; + } + cvmx_wait(10000); + pciercx_cfg032.u32 = + cvmx_pcie_cfgx_read(pcie_port, + CVMX_PCIERCX_CFG032(pcie_port)); + } while (pciercx_cfg032.s.dlla == 0); + + /* Display the link status */ + cvmx_dprintf("PCIe: Port %d link active, %d lanes\n", pcie_port, + pciercx_cfg032.s.nlw); + + /* + * Update the Replay Time Limit. Empirically, some PCIe + * devices take a little longer to respond than expected under + * load. As a workaround for this we configure the Replay Time + * Limit to the value expected for a 512 byte MPS instead of + * our actual 256 byte MPS. The numbers below are directly + * from the PCIe spec table 3-4. + */ + pciercx_cfg448.u32 = + cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG448(pcie_port)); + switch (pciercx_cfg032.s.nlw) { + case 1: /* 1 lane */ + pciercx_cfg448.s.rtl = 1677; + break; + case 2: /* 2 lanes */ + pciercx_cfg448.s.rtl = 867; + break; + case 4: /* 4 lanes */ + pciercx_cfg448.s.rtl = 462; + break; + case 8: /* 8 lanes */ + pciercx_cfg448.s.rtl = 258; + break; + } + cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG448(pcie_port), + pciercx_cfg448.u32); + + return 0; +} + +/** + * Initialize a PCIe port for use in host(RC) mode. It doesn't + * enumerate the bus. + * + * @pcie_port: PCIe port to initialize + * + * Returns Zero on success + */ +static int cvmx_pcie_rc_initialize(int pcie_port) +{ + int i; + union cvmx_ciu_soft_prst ciu_soft_prst; + union cvmx_pescx_bist_status pescx_bist_status; + union cvmx_pescx_bist_status2 pescx_bist_status2; + union cvmx_npei_ctl_status npei_ctl_status; + union cvmx_npei_mem_access_ctl npei_mem_access_ctl; + union cvmx_npei_mem_access_subidx mem_access_subid; + union cvmx_npei_dbg_data npei_dbg_data; + union cvmx_pescx_ctl_status2 pescx_ctl_status2; + + /* + * Make sure we aren't trying to setup a target mode interface + * in host mode. + */ + npei_ctl_status.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_CTL_STATUS); + if ((pcie_port == 0) && !npei_ctl_status.s.host_mode) { + cvmx_dprintf("PCIe: ERROR: cvmx_pcie_rc_initialize() called " + "on port0, but port0 is not in host mode\n"); + return -1; + } + + /* + * Make sure a CN52XX isn't trying to bring up port 1 when it + * is disabled. + */ + if (OCTEON_IS_MODEL(OCTEON_CN52XX)) { + npei_dbg_data.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_DBG_DATA); + if ((pcie_port == 1) && npei_dbg_data.cn52xx.qlm0_link_width) { + cvmx_dprintf("PCIe: ERROR: cvmx_pcie_rc_initialize() " + "called on port1, but port1 is " + "disabled\n"); + return -1; + } + } + + /* + * PCIe switch arbitration mode. '0' == fixed priority NPEI, + * PCIe0, then PCIe1. '1' == round robin. + */ + npei_ctl_status.s.arb = 1; + /* Allow up to 0x20 config retries */ + npei_ctl_status.s.cfg_rtry = 0x20; + /* + * CN52XX pass1.x has an errata where P0_NTAGS and P1_NTAGS + * don't reset. + */ + if (OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_X)) { + npei_ctl_status.s.p0_ntags = 0x20; + npei_ctl_status.s.p1_ntags = 0x20; + } + cvmx_write_csr(CVMX_PEXP_NPEI_CTL_STATUS, npei_ctl_status.u64); + + /* Bring the PCIe out of reset */ + if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_EBH5200) { + /* + * The EBH5200 board swapped the PCIe reset lines on + * the board. As a workaround for this bug, we bring + * both PCIe ports out of reset at the same time + * instead of on separate calls. So for port 0, we + * bring both out of reset and do nothing on port 1. + */ + if (pcie_port == 0) { + ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST); + /* + * After a chip reset the PCIe will also be in + * reset. If it isn't, most likely someone is + * trying to init it again without a proper + * PCIe reset. + */ + if (ciu_soft_prst.s.soft_prst == 0) { + /* Reset the ports */ + ciu_soft_prst.s.soft_prst = 1; + cvmx_write_csr(CVMX_CIU_SOFT_PRST, + ciu_soft_prst.u64); + ciu_soft_prst.u64 = + cvmx_read_csr(CVMX_CIU_SOFT_PRST1); + ciu_soft_prst.s.soft_prst = 1; + cvmx_write_csr(CVMX_CIU_SOFT_PRST1, + ciu_soft_prst.u64); + /* Wait until pcie resets the ports. */ + udelay(2000); + } + ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST1); + ciu_soft_prst.s.soft_prst = 0; + cvmx_write_csr(CVMX_CIU_SOFT_PRST1, ciu_soft_prst.u64); + ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST); + ciu_soft_prst.s.soft_prst = 0; + cvmx_write_csr(CVMX_CIU_SOFT_PRST, ciu_soft_prst.u64); + } + } else { + /* + * The normal case: The PCIe ports are completely + * separate and can be brought out of reset + * independently. + */ + if (pcie_port) + ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST1); + else + ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST); + /* + * After a chip reset the PCIe will also be in + * reset. If it isn't, most likely someone is trying + * to init it again without a proper PCIe reset. + */ + if (ciu_soft_prst.s.soft_prst == 0) { + /* Reset the port */ + ciu_soft_prst.s.soft_prst = 1; + if (pcie_port) + cvmx_write_csr(CVMX_CIU_SOFT_PRST1, + ciu_soft_prst.u64); + else + cvmx_write_csr(CVMX_CIU_SOFT_PRST, + ciu_soft_prst.u64); + /* Wait until pcie resets the ports. */ + udelay(2000); + } + if (pcie_port) { + ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST1); + ciu_soft_prst.s.soft_prst = 0; + cvmx_write_csr(CVMX_CIU_SOFT_PRST1, ciu_soft_prst.u64); + } else { + ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST); + ciu_soft_prst.s.soft_prst = 0; + cvmx_write_csr(CVMX_CIU_SOFT_PRST, ciu_soft_prst.u64); + } + } + + /* + * Wait for PCIe reset to complete. Due to errata PCIE-700, we + * don't poll PESCX_CTL_STATUS2[PCIERST], but simply wait a + * fixed number of cycles. + */ + cvmx_wait(400000); + + /* PESCX_BIST_STATUS2[PCLK_RUN] was missing on pass 1 of CN56XX and + CN52XX, so we only probe it on newer chips */ + if (!OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_X) + && !OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_X)) { + /* Clear PCLK_RUN so we can check if the clock is running */ + pescx_ctl_status2.u64 = + cvmx_read_csr(CVMX_PESCX_CTL_STATUS2(pcie_port)); + pescx_ctl_status2.s.pclk_run = 1; + cvmx_write_csr(CVMX_PESCX_CTL_STATUS2(pcie_port), + pescx_ctl_status2.u64); + /* + * Now that we cleared PCLK_RUN, wait for it to be set + * again telling us the clock is running. + */ + if (CVMX_WAIT_FOR_FIELD64(CVMX_PESCX_CTL_STATUS2(pcie_port), + union cvmx_pescx_ctl_status2, + pclk_run, ==, 1, 10000)) { + cvmx_dprintf("PCIe: Port %d isn't clocked, skipping.\n", + pcie_port); + return -1; + } + } + + /* + * Check and make sure PCIe came out of reset. If it doesn't + * the board probably hasn't wired the clocks up and the + * interface should be skipped. + */ + pescx_ctl_status2.u64 = + cvmx_read_csr(CVMX_PESCX_CTL_STATUS2(pcie_port)); + if (pescx_ctl_status2.s.pcierst) { + cvmx_dprintf("PCIe: Port %d stuck in reset, skipping.\n", + pcie_port); + return -1; + } + + /* + * Check BIST2 status. If any bits are set skip this interface. This + * is an attempt to catch PCIE-813 on pass 1 parts. + */ + pescx_bist_status2.u64 = + cvmx_read_csr(CVMX_PESCX_BIST_STATUS2(pcie_port)); + if (pescx_bist_status2.u64) { + cvmx_dprintf("PCIe: Port %d BIST2 failed. Most likely this " + "port isn't hooked up, skipping.\n", + pcie_port); + return -1; + } + + /* Check BIST status */ + pescx_bist_status.u64 = + cvmx_read_csr(CVMX_PESCX_BIST_STATUS(pcie_port)); + if (pescx_bist_status.u64) + cvmx_dprintf("PCIe: BIST FAILED for port %d (0x%016llx)\n", + pcie_port, CAST64(pescx_bist_status.u64)); + + /* Initialize the config space CSRs */ + __cvmx_pcie_rc_initialize_config_space(pcie_port); + + /* Bring the link up */ + if (__cvmx_pcie_rc_initialize_link(pcie_port)) { + cvmx_dprintf + ("PCIe: ERROR: cvmx_pcie_rc_initialize_link() failed\n"); + return -1; + } + + /* Store merge control (NPEI_MEM_ACCESS_CTL[TIMER,MAX_WORD]) */ + npei_mem_access_ctl.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_MEM_ACCESS_CTL); + /* Allow 16 words to combine */ + npei_mem_access_ctl.s.max_word = 0; + /* Wait up to 127 cycles for more data */ + npei_mem_access_ctl.s.timer = 127; + cvmx_write_csr(CVMX_PEXP_NPEI_MEM_ACCESS_CTL, npei_mem_access_ctl.u64); + + /* Setup Mem access SubDIDs */ + mem_access_subid.u64 = 0; + /* Port the request is sent to. */ + mem_access_subid.s.port = pcie_port; + /* Due to an errata on pass 1 chips, no merging is allowed. */ + mem_access_subid.s.nmerge = 1; + /* Endian-swap for Reads. */ + mem_access_subid.s.esr = 1; + /* Endian-swap for Writes. */ + mem_access_subid.s.esw = 1; + /* No Snoop for Reads. */ + mem_access_subid.s.nsr = 1; + /* No Snoop for Writes. */ + mem_access_subid.s.nsw = 1; + /* Disable Relaxed Ordering for Reads. */ + mem_access_subid.s.ror = 0; + /* Disable Relaxed Ordering for Writes. */ + mem_access_subid.s.row = 0; + /* PCIe Adddress Bits <63:34>. */ + mem_access_subid.s.ba = 0; + + /* + * Setup mem access 12-15 for port 0, 16-19 for port 1, + * supplying 36 bits of address space. + */ + for (i = 12 + pcie_port * 4; i < 16 + pcie_port * 4; i++) { + cvmx_write_csr(CVMX_PEXP_NPEI_MEM_ACCESS_SUBIDX(i), + mem_access_subid.u64); + /* Set each SUBID to extend the addressable range */ + mem_access_subid.s.ba += 1; + } + + /* + * Disable the peer to peer forwarding register. This must be + * setup by the OS after it enumerates the bus and assigns + * addresses to the PCIe busses. + */ + for (i = 0; i < 4; i++) { + cvmx_write_csr(CVMX_PESCX_P2P_BARX_START(i, pcie_port), -1); + cvmx_write_csr(CVMX_PESCX_P2P_BARX_END(i, pcie_port), -1); + } + + /* Set Octeon's BAR0 to decode 0-16KB. It overlaps with Bar2 */ + cvmx_write_csr(CVMX_PESCX_P2N_BAR0_START(pcie_port), 0); + + /* + * Disable Octeon's BAR1. It isn't needed in RC mode since + * BAR2 maps all of memory. BAR2 also maps 256MB-512MB into + * the 2nd 256MB of memory. + */ + cvmx_write_csr(CVMX_PESCX_P2N_BAR1_START(pcie_port), -1); + + /* + * Set Octeon's BAR2 to decode 0-2^39. Bar0 and Bar1 take + * precedence where they overlap. It also overlaps with the + * device addresses, so make sure the peer to peer forwarding + * is set right. + */ + cvmx_write_csr(CVMX_PESCX_P2N_BAR2_START(pcie_port), 0); + + /* + * Setup BAR2 attributes + * + * Relaxed Ordering (NPEI_CTL_PORTn[PTLP_RO,CTLP_RO, WAIT_COM]) + * - PTLP_RO,CTLP_RO should normally be set (except for debug). + * - WAIT_COM=0 will likely work for all applications. + * + * Load completion relaxed ordering (NPEI_CTL_PORTn[WAITL_COM]). + */ + if (pcie_port) { + union cvmx_npei_ctl_port1 npei_ctl_port; + npei_ctl_port.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_CTL_PORT1); + npei_ctl_port.s.bar2_enb = 1; + npei_ctl_port.s.bar2_esx = 1; + npei_ctl_port.s.bar2_cax = 0; + npei_ctl_port.s.ptlp_ro = 1; + npei_ctl_port.s.ctlp_ro = 1; + npei_ctl_port.s.wait_com = 0; + npei_ctl_port.s.waitl_com = 0; + cvmx_write_csr(CVMX_PEXP_NPEI_CTL_PORT1, npei_ctl_port.u64); + } else { + union cvmx_npei_ctl_port0 npei_ctl_port; + npei_ctl_port.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_CTL_PORT0); + npei_ctl_port.s.bar2_enb = 1; + npei_ctl_port.s.bar2_esx = 1; + npei_ctl_port.s.bar2_cax = 0; + npei_ctl_port.s.ptlp_ro = 1; + npei_ctl_port.s.ctlp_ro = 1; + npei_ctl_port.s.wait_com = 0; + npei_ctl_port.s.waitl_com = 0; + cvmx_write_csr(CVMX_PEXP_NPEI_CTL_PORT0, npei_ctl_port.u64); + } + return 0; +} + + +/* Above was cvmx-pcie.c, below original pcie.c */ + + +/** + * Map a PCI device to the appropriate interrupt line + * + * @param dev The Linux PCI device structure for the device to map + * @param slot The slot number for this device on __BUS 0__. Linux + * enumerates through all the bridges and figures out the + * slot on Bus 0 where this device eventually hooks to. + * @param pin The PCI interrupt pin read from the device, then swizzled + * as it goes through each bridge. + * @return Interrupt number for the device + */ +int __init octeon_pcie_pcibios_map_irq(const struct pci_dev *dev, + u8 slot, u8 pin) +{ + /* + * The EBH5600 board with the PCI to PCIe bridge mistakenly + * wires the first slot for both device id 2 and interrupt + * A. According to the PCI spec, device id 2 should be C. The + * following kludge attempts to fix this. + */ + if (strstr(octeon_board_type_string(), "EBH5600") && + dev->bus && dev->bus->parent) { + /* + * Iterate all the way up the device chain and find + * the root bus. + */ + while (dev->bus && dev->bus->parent) + dev = to_pci_dev(dev->bus->bridge); + /* If the root bus is number 0 and the PEX 8114 is the + * root, assume we are behind the miswired bus. We + * need to correct the swizzle level by two. Yuck. + */ + if ((dev->bus->number == 0) && + (dev->vendor == 0x10b5) && (dev->device == 0x8114)) { + /* + * The pin field is one based, not zero. We + * need to swizzle it by minus two. + */ + pin = ((pin - 3) & 3) + 1; + } + } + /* + * The -1 is because pin starts with one, not zero. It might + * be that this equation needs to include the slot number, but + * I don't have hardware to check that against. + */ + return pin - 1 + OCTEON_IRQ_PCI_INT0; +} + +/** + * Read a value from configuration space + * + * @param bus + * @param devfn + * @param reg + * @param size + * @param val + * @return + */ +static inline int octeon_pcie_read_config(int pcie_port, struct pci_bus *bus, + unsigned int devfn, int reg, int size, + u32 *val) +{ + union octeon_cvmemctl cvmmemctl; + union octeon_cvmemctl cvmmemctl_save; + int bus_number = bus->number; + + /* + * We need to force the bus number to be zero on the root + * bus. Linux numbers the 2nd root bus to start after all + * buses on root 0. + */ + if (bus->parent == NULL) + bus_number = 0; + + /* + * PCIe only has a single device connected to Octeon. It is + * always device ID 0. Don't bother doing reads for other + * device IDs on the first segment. + */ + if ((bus_number == 0) && (devfn >> 3 != 0)) + return PCIBIOS_FUNC_NOT_SUPPORTED; + + /* + * The following is a workaround for the CN57XX, CN56XX, + * CN55XX, and CN54XX errata with PCIe config reads from non + * existent devices. These chips will hang the PCIe link if a + * config read is performed that causes a UR response. + */ + if (OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1) || + OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_1)) { + /* + * For our EBH5600 board, port 0 has a bridge with two + * PCI-X slots. We need a new special checks to make + * sure we only probe valid stuff. The PCIe->PCI-X + * bridge only respondes to device ID 0, function + * 0-1 + */ + if ((bus_number == 0) && (devfn >= 2)) + return PCIBIOS_FUNC_NOT_SUPPORTED; + /* + * The PCI-X slots are device ID 2,3. Choose one of + * the below "if" blocks based on what is plugged into + * the board. + */ +#if 1 + /* Use this option if you aren't using either slot */ + if (bus_number == 1) + return PCIBIOS_FUNC_NOT_SUPPORTED; +#elif 0 + /* + * Use this option if you are using the first slot but + * not the second. + */ + if ((bus_number == 1) && (devfn >> 3 != 2)) + return PCIBIOS_FUNC_NOT_SUPPORTED; +#elif 0 + /* + * Use this option if you are using the second slot + * but not the first. + */ + if ((bus_number == 1) && (devfn >> 3 != 3)) + return PCIBIOS_FUNC_NOT_SUPPORTED; +#elif 0 + /* Use this opion if you are using both slots */ + if ((bus_number == 1) && + !((devfn == (2 << 3)) || (devfn == (3 << 3)))) + return PCIBIOS_FUNC_NOT_SUPPORTED; +#endif + + /* + * Shorten the DID timeout so bus errors for PCIe + * config reads from non existent devices happen + * faster. This allows us to continue booting even if + * the above "if" checks are wrong. Once one of these + * errors happens, the PCIe port is dead. + */ + cvmmemctl_save.u64 = __read_64bit_c0_register($11, 7); + cvmmemctl.u64 = cvmmemctl_save.u64; + cvmmemctl.s.didtto = 2; + __write_64bit_c0_register($11, 7, cvmmemctl.u64); + } + + switch (size) { + case 4: + *val = cvmx_pcie_config_read32(pcie_port, bus_number, + devfn >> 3, devfn & 0x7, reg); + break; + case 2: + *val = cvmx_pcie_config_read16(pcie_port, bus_number, + devfn >> 3, devfn & 0x7, reg); + break; + case 1: + *val = cvmx_pcie_config_read8(pcie_port, bus_number, devfn >> 3, + devfn & 0x7, reg); + break; + default: + return PCIBIOS_FUNC_NOT_SUPPORTED; + } + + if (OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1) || + OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_1)) + __write_64bit_c0_register($11, 7, cvmmemctl_save.u64); + return PCIBIOS_SUCCESSFUL; +} + +static int octeon_pcie0_read_config(struct pci_bus *bus, unsigned int devfn, + int reg, int size, u32 *val) +{ + return octeon_pcie_read_config(0, bus, devfn, reg, size, val); +} + +static int octeon_pcie1_read_config(struct pci_bus *bus, unsigned int devfn, + int reg, int size, u32 *val) +{ + return octeon_pcie_read_config(1, bus, devfn, reg, size, val); +} + + + +/** + * Write a value to PCI configuration space + * + * @param bus + * @param devfn + * @param reg + * @param size + * @param val + * @return + */ +static inline int octeon_pcie_write_config(int pcie_port, struct pci_bus *bus, + unsigned int devfn, int reg, + int size, u32 val) +{ + int bus_number = bus->number; + /* + * We need to force the bus number to be zero on the root + * bus. Linux numbers the 2nd root bus to start after all + * busses on root 0. + */ + if (bus->parent == NULL) + bus_number = 0; + + switch (size) { + case 4: + cvmx_pcie_config_write32(pcie_port, bus_number, devfn >> 3, + devfn & 0x7, reg, val); + return PCIBIOS_SUCCESSFUL; + case 2: + cvmx_pcie_config_write16(pcie_port, bus_number, devfn >> 3, + devfn & 0x7, reg, val); + return PCIBIOS_SUCCESSFUL; + case 1: + cvmx_pcie_config_write8(pcie_port, bus_number, devfn >> 3, + devfn & 0x7, reg, val); + return PCIBIOS_SUCCESSFUL; + } +#if PCI_CONFIG_SPACE_DELAY + udelay(PCI_CONFIG_SPACE_DELAY); +#endif + return PCIBIOS_FUNC_NOT_SUPPORTED; +} + +static int octeon_pcie0_write_config(struct pci_bus *bus, unsigned int devfn, + int reg, int size, u32 val) +{ + return octeon_pcie_write_config(0, bus, devfn, reg, size, val); +} + +static int octeon_pcie1_write_config(struct pci_bus *bus, unsigned int devfn, + int reg, int size, u32 val) +{ + return octeon_pcie_write_config(1, bus, devfn, reg, size, val); +} + +static struct pci_ops octeon_pcie0_ops = { + octeon_pcie0_read_config, + octeon_pcie0_write_config, +}; + +static struct resource octeon_pcie0_mem_resource = { + .name = "Octeon PCIe0 MEM", + .flags = IORESOURCE_MEM, +}; + +static struct resource octeon_pcie0_io_resource = { + .name = "Octeon PCIe0 IO", + .flags = IORESOURCE_IO, +}; + +static struct pci_controller octeon_pcie0_controller = { + .pci_ops = &octeon_pcie0_ops, + .mem_resource = &octeon_pcie0_mem_resource, + .io_resource = &octeon_pcie0_io_resource, +}; + +static struct pci_ops octeon_pcie1_ops = { + octeon_pcie1_read_config, + octeon_pcie1_write_config, +}; + +static struct resource octeon_pcie1_mem_resource = { + .name = "Octeon PCIe1 MEM", + .flags = IORESOURCE_MEM, +}; + +static struct resource octeon_pcie1_io_resource = { + .name = "Octeon PCIe1 IO", + .flags = IORESOURCE_IO, +}; + +static struct pci_controller octeon_pcie1_controller = { + .pci_ops = &octeon_pcie1_ops, + .mem_resource = &octeon_pcie1_mem_resource, + .io_resource = &octeon_pcie1_io_resource, +}; + + +/** + * Initialize the Octeon PCIe controllers + * + * @return + */ +static int __init octeon_pcie_setup(void) +{ + union cvmx_npei_ctl_status npei_ctl_status; + int result; + + /* These chips don't have PCIe */ + if (!octeon_has_feature(OCTEON_FEATURE_PCIE)) + return 0; + + /* Point pcibios_map_irq() to the PCIe version of it */ + octeon_pcibios_map_irq = octeon_pcie_pcibios_map_irq; + + /* Use the PCIe based DMA mappings */ + octeon_dma_bar_type = OCTEON_DMA_BAR_TYPE_PCIE; + + /* + * PCIe I/O range. It is based on port 0 but includes up until + * port 1's end. + */ + set_io_port_base(CVMX_ADD_IO_SEG(cvmx_pcie_get_io_base_address(0))); + ioport_resource.start = 0; + ioport_resource.end = + cvmx_pcie_get_io_base_address(1) - + cvmx_pcie_get_io_base_address(0) + cvmx_pcie_get_io_size(1) - 1; + + npei_ctl_status.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_CTL_STATUS); + if (npei_ctl_status.s.host_mode) { + pr_notice("PCIe: Initializing port 0\n"); + result = cvmx_pcie_rc_initialize(0); + if (result == 0) { + /* Memory offsets are physical addresses */ + octeon_pcie0_controller.mem_offset = + cvmx_pcie_get_mem_base_address(0); + /* IO offsets are Mips virtual addresses */ + octeon_pcie0_controller.io_map_base = + CVMX_ADD_IO_SEG(cvmx_pcie_get_io_base_address + (0)); + octeon_pcie0_controller.io_offset = 0; + /* + * To keep things similar to PCI, we start + * device addresses at the same place as PCI + * uisng big bar support. This normally + * translates to 4GB-256MB, which is the same + * as most x86 PCs. + */ + octeon_pcie0_controller.mem_resource->start = + cvmx_pcie_get_mem_base_address(0) + + (4ul << 30) - (OCTEON_PCI_BAR1_HOLE_SIZE << 20); + octeon_pcie0_controller.mem_resource->end = + cvmx_pcie_get_mem_base_address(0) + + cvmx_pcie_get_mem_size(0) - 1; + /* + * Ports must be above 16KB for the ISA bus + * filtering in the PCI-X to PCI bridge. + */ + octeon_pcie0_controller.io_resource->start = 4 << 10; + octeon_pcie0_controller.io_resource->end = + cvmx_pcie_get_io_size(0) - 1; + register_pci_controller(&octeon_pcie0_controller); + } + } else { + pr_notice("PCIe: Port 0 in endpoint mode, skipping.\n"); + } + + /* Skip the 2nd port on CN52XX if port 0 is in 4 lane mode */ + if (OCTEON_IS_MODEL(OCTEON_CN52XX)) { + union cvmx_npei_dbg_data npei_dbg_data; + npei_dbg_data.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_DBG_DATA); + if (npei_dbg_data.cn52xx.qlm0_link_width) + return 0; + } + + pr_notice("PCIe: Initializing port 1\n"); + result = cvmx_pcie_rc_initialize(1); + if (result == 0) { + /* Memory offsets are physical addresses */ + octeon_pcie1_controller.mem_offset = + cvmx_pcie_get_mem_base_address(1); + /* IO offsets are Mips virtual addresses */ + octeon_pcie1_controller.io_map_base = + CVMX_ADD_IO_SEG(cvmx_pcie_get_io_base_address(1)); + octeon_pcie1_controller.io_offset = + cvmx_pcie_get_io_base_address(1) - + cvmx_pcie_get_io_base_address(0); + /* + * To keep things similar to PCI, we start device + * addresses at the same place as PCI uisng big bar + * support. This normally translates to 4GB-256MB, + * which is the same as most x86 PCs. + */ + octeon_pcie1_controller.mem_resource->start = + cvmx_pcie_get_mem_base_address(1) + (4ul << 30) - + (OCTEON_PCI_BAR1_HOLE_SIZE << 20); + octeon_pcie1_controller.mem_resource->end = + cvmx_pcie_get_mem_base_address(1) + + cvmx_pcie_get_mem_size(1) - 1; + /* + * Ports must be above 16KB for the ISA bus filtering + * in the PCI-X to PCI bridge. + */ + octeon_pcie1_controller.io_resource->start = + cvmx_pcie_get_io_base_address(1) - + cvmx_pcie_get_io_base_address(0); + octeon_pcie1_controller.io_resource->end = + octeon_pcie1_controller.io_resource->start + + cvmx_pcie_get_io_size(1) - 1; + register_pci_controller(&octeon_pcie1_controller); + } + return 0; +} + +arch_initcall(octeon_pcie_setup); diff --git a/arch/mips/include/asm/octeon/cvmx-helper-errata.h b/arch/mips/include/asm/octeon/cvmx-helper-errata.h new file mode 100644 index 0000000..5fc9918 --- /dev/null +++ b/arch/mips/include/asm/octeon/cvmx-helper-errata.h @@ -0,0 +1,33 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +#ifndef __CVMX_HELPER_ERRATA_H__ +#define __CVMX_HELPER_ERRATA_H__ + +extern void __cvmx_helper_errata_qlm_disable_2nd_order_cdr(int qlm); + +#endif diff --git a/arch/mips/include/asm/octeon/cvmx-helper-jtag.h b/arch/mips/include/asm/octeon/cvmx-helper-jtag.h new file mode 100644 index 0000000..29f016d --- /dev/null +++ b/arch/mips/include/asm/octeon/cvmx-helper-jtag.h @@ -0,0 +1,43 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +/** + * @file + * + * Helper utilities for qlm_jtag. + * + */ + +#ifndef __CVMX_HELPER_JTAG_H__ +#define __CVMX_HELPER_JTAG_H__ + +extern void cvmx_helper_qlm_jtag_init(void); +extern uint32_t cvmx_helper_qlm_jtag_shift(int qlm, int bits, uint32_t data); +extern void cvmx_helper_qlm_jtag_shift_zeros(int qlm, int bits); +extern void cvmx_helper_qlm_jtag_update(int qlm); + +#endif /* __CVMX_HELPER_JTAG_H__ */ diff --git a/arch/mips/include/asm/octeon/cvmx.h b/arch/mips/include/asm/octeon/cvmx.h index 03fddfa..e31e3fe 100644 --- a/arch/mips/include/asm/octeon/cvmx.h +++ b/arch/mips/include/asm/octeon/cvmx.h @@ -376,6 +376,18 @@ static inline uint64_t cvmx_get_cycle(void) } /** + * Wait for the specified number of cycle + * + */ +static inline void cvmx_wait(uint64_t cycles) +{ + uint64_t done = cvmx_get_cycle() + cycles; + + while (cvmx_get_cycle() < done) + ; /* Spin */ +} + +/** * Reads a chip global cycle counter. This counts CPU cycles since * chip reset. The counter is 64 bit. * This register does not exist on CN38XX pass 1 silicion diff --git a/arch/mips/include/asm/octeon/octeon.h b/arch/mips/include/asm/octeon/octeon.h index edc6760..cac9b1a 100644 --- a/arch/mips/include/asm/octeon/octeon.h +++ b/arch/mips/include/asm/octeon/octeon.h @@ -245,4 +245,6 @@ static inline uint32_t octeon_npi_read32(uint64_t address) return cvmx_read64_uint32(address ^ 4); } +extern struct cvmx_bootinfo *octeon_bootinfo; + #endif /* __ASM_OCTEON_OCTEON_H */ -- cgit v1.1 From 742cd5867b2ef7ce865d7ab67574c4e3aa1fb155 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Date: Tue, 19 May 2009 22:12:22 +0900 Subject: MIPS: TXx9: Add ACLC support Add platform support for ACLC of TXx9 SoCs. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/include/asm/txx9/generic.h | 5 ++++ arch/mips/include/asm/txx9/tx4927.h | 2 ++ arch/mips/include/asm/txx9/tx4938.h | 1 + arch/mips/include/asm/txx9/tx4939.h | 1 + arch/mips/txx9/Kconfig | 3 +++ arch/mips/txx9/generic/setup.c | 36 +++++++++++++++++++++++++++++ arch/mips/txx9/generic/setup_tx4927.c | 43 +++++++++++++++++++++++++++++++++++ arch/mips/txx9/generic/setup_tx4938.c | 11 +++++++++ arch/mips/txx9/generic/setup_tx4939.c | 9 ++++++++ arch/mips/txx9/rbtx4927/setup.c | 8 +++++-- arch/mips/txx9/rbtx4938/setup.c | 2 ++ arch/mips/txx9/rbtx4939/setup.c | 2 ++ 12 files changed, 121 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/mips/include/asm/txx9/generic.h b/arch/mips/include/asm/txx9/generic.h index 9cde009..8169477 100644 --- a/arch/mips/include/asm/txx9/generic.h +++ b/arch/mips/include/asm/txx9/generic.h @@ -91,4 +91,9 @@ void txx9_7segled_init(unsigned int num, void (*putc)(unsigned int pos, unsigned char val)); int txx9_7segled_putc(unsigned int pos, char c); +void __init txx9_aclc_init(unsigned long baseaddr, int irq, + unsigned int dmac_id, + unsigned int dma_chan_out, + unsigned int dma_chan_in); + #endif /* __ASM_TXX9_GENERIC_H */ diff --git a/arch/mips/include/asm/txx9/tx4927.h b/arch/mips/include/asm/txx9/tx4927.h index d92ae07..18c98c5 100644 --- a/arch/mips/include/asm/txx9/tx4927.h +++ b/arch/mips/include/asm/txx9/tx4927.h @@ -50,6 +50,7 @@ #define TX4927_NR_SIO 2 #define TX4927_SIO_REG(ch) (TX4927_REG_BASE + 0xf300 + (ch) * 0x100) #define TX4927_PIO_REG (TX4927_REG_BASE + 0xf500) +#define TX4927_ACLC_REG (TX4927_REG_BASE + 0xf700) #define TX4927_IR_ECCERR 0 #define TX4927_IR_WTOERR 1 @@ -267,5 +268,6 @@ void tx4927_setup_pcierr_irq(void); void tx4927_irq_init(void); void tx4927_mtd_init(int ch); void tx4927_dmac_init(int memcpy_chan); +void tx4927_aclc_init(unsigned int dma_chan_out, unsigned int dma_chan_in); #endif /* __ASM_TXX9_TX4927_H */ diff --git a/arch/mips/include/asm/txx9/tx4938.h b/arch/mips/include/asm/txx9/tx4938.h index 0758a0c..54e4674 100644 --- a/arch/mips/include/asm/txx9/tx4938.h +++ b/arch/mips/include/asm/txx9/tx4938.h @@ -306,5 +306,6 @@ struct tx4938ide_platform_info { void tx4938_ata_init(unsigned int irq, unsigned int shift, int tune); void tx4938_dmac_init(int memcpy_chan0, int memcpy_chan1); +void tx4938_aclc_init(void); #endif diff --git a/arch/mips/include/asm/txx9/tx4939.h b/arch/mips/include/asm/txx9/tx4939.h index 1be9798..f13b708 100644 --- a/arch/mips/include/asm/txx9/tx4939.h +++ b/arch/mips/include/asm/txx9/tx4939.h @@ -545,5 +545,6 @@ void tx4939_rtc_init(void); void tx4939_ndfmc_init(unsigned int hold, unsigned int spw, unsigned char ch_mask, unsigned char wide_mask); void tx4939_dmac_init(int memcpy_chan0, int memcpy_chan1); +void tx4939_aclc_init(void); #endif /* __ASM_TXX9_TX4939_H */ diff --git a/arch/mips/txx9/Kconfig b/arch/mips/txx9/Kconfig index 0db7cf3..852ae4b 100644 --- a/arch/mips/txx9/Kconfig +++ b/arch/mips/txx9/Kconfig @@ -69,6 +69,7 @@ config SOC_TX4927 select IRQ_TXX9 select PCI_TX4927 select GPIO_TXX9 + select HAS_TXX9_ACLC config SOC_TX4938 bool @@ -78,6 +79,7 @@ config SOC_TX4938 select IRQ_TXX9 select PCI_TX4927 select GPIO_TXX9 + select HAS_TXX9_ACLC config SOC_TX4939 bool @@ -85,6 +87,7 @@ config SOC_TX4939 select HAS_TXX9_SERIAL select HW_HAS_PCI select PCI_TX4927 + select HAS_TXX9_ACLC config TXX9_7SEGLED bool diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c index 369d863..7f91012 100644 --- a/arch/mips/txx9/generic/setup.c +++ b/arch/mips/txx9/generic/setup.c @@ -876,3 +876,39 @@ void __init txx9_dmac_init(int id, unsigned long baseaddr, int irq, } #endif } + +void __init txx9_aclc_init(unsigned long baseaddr, int irq, + unsigned int dmac_id, + unsigned int dma_chan_out, + unsigned int dma_chan_in) +{ +#if defined(CONFIG_SND_SOC_TXX9ACLC) || \ + defined(CONFIG_SND_SOC_TXX9ACLC_MODULE) + unsigned int dma_base = dmac_id * TXX9_DMA_MAX_NR_CHANNELS; + struct resource res[] = { + { + .start = baseaddr, + .end = baseaddr + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, { + .start = irq, + .flags = IORESOURCE_IRQ, + }, { + .name = "txx9dmac-chan", + .start = dma_base + dma_chan_out, + .flags = IORESOURCE_DMA, + }, { + .name = "txx9dmac-chan", + .start = dma_base + dma_chan_in, + .flags = IORESOURCE_DMA, + } + }; + struct platform_device *pdev = + platform_device_alloc("txx9aclc-ac97", -1); + + if (!pdev || + platform_device_add_resources(pdev, res, ARRAY_SIZE(res)) || + platform_device_add(pdev)) + platform_device_put(pdev); +#endif +} diff --git a/arch/mips/txx9/generic/setup_tx4927.c b/arch/mips/txx9/generic/setup_tx4927.c index 6b681cd..3418b2a 100644 --- a/arch/mips/txx9/generic/setup_tx4927.c +++ b/arch/mips/txx9/generic/setup_tx4927.c @@ -265,6 +265,49 @@ void __init tx4927_dmac_init(int memcpy_chan) TXX9_IRQ_BASE + TX4927_IR_DMA(0), &plat_data); } +void __init tx4927_aclc_init(unsigned int dma_chan_out, + unsigned int dma_chan_in) +{ + u64 pcfg = __raw_readq(&tx4927_ccfgptr->pcfg); + __u64 dmasel_mask = 0, dmasel = 0; + unsigned long flags; + + if (!(pcfg & TX4927_PCFG_SEL2)) + return; + /* setup DMASEL (playback:ACLC ch0, capture:ACLC ch1) */ + switch (dma_chan_out) { + case 0: + dmasel_mask |= TX4927_PCFG_DMASEL0_MASK; + dmasel |= TX4927_PCFG_DMASEL0_ACL0; + break; + case 2: + dmasel_mask |= TX4927_PCFG_DMASEL2_MASK; + dmasel |= TX4927_PCFG_DMASEL2_ACL0; + break; + default: + return; + } + switch (dma_chan_in) { + case 1: + dmasel_mask |= TX4927_PCFG_DMASEL1_MASK; + dmasel |= TX4927_PCFG_DMASEL1_ACL1; + break; + case 3: + dmasel_mask |= TX4927_PCFG_DMASEL3_MASK; + dmasel |= TX4927_PCFG_DMASEL3_ACL1; + break; + default: + return; + } + local_irq_save(flags); + txx9_clear64(&tx4927_ccfgptr->pcfg, dmasel_mask); + txx9_set64(&tx4927_ccfgptr->pcfg, dmasel); + local_irq_restore(flags); + txx9_aclc_init(TX4927_ACLC_REG & 0xfffffffffULL, + TXX9_IRQ_BASE + TX4927_IR_ACLC, + 0, dma_chan_out, dma_chan_in); +} + static void __init tx4927_stop_unused_modules(void) { __u64 pcfg, rst = 0, ckd = 0; diff --git a/arch/mips/txx9/generic/setup_tx4938.c b/arch/mips/txx9/generic/setup_tx4938.c index b2b8529..4dfdb52 100644 --- a/arch/mips/txx9/generic/setup_tx4938.c +++ b/arch/mips/txx9/generic/setup_tx4938.c @@ -414,6 +414,17 @@ void __init tx4938_dmac_init(int memcpy_chan0, int memcpy_chan1) } } +void __init tx4938_aclc_init(void) +{ + u64 pcfg = __raw_readq(&tx4938_ccfgptr->pcfg); + + if ((pcfg & TX4938_PCFG_SEL2) && + !(pcfg & TX4938_PCFG_ETH0_SEL)) + txx9_aclc_init(TX4938_ACLC_REG & 0xfffffffffULL, + TXX9_IRQ_BASE + TX4938_IR_ACLC, + 1, 0, 1); +} + static void __init tx4938_stop_unused_modules(void) { __u64 pcfg, rst = 0, ckd = 0; diff --git a/arch/mips/txx9/generic/setup_tx4939.c b/arch/mips/txx9/generic/setup_tx4939.c index 98effef..7139686 100644 --- a/arch/mips/txx9/generic/setup_tx4939.c +++ b/arch/mips/txx9/generic/setup_tx4939.c @@ -485,6 +485,15 @@ void __init tx4939_dmac_init(int memcpy_chan0, int memcpy_chan1) } } +void __init tx4939_aclc_init(void) +{ + u64 pcfg = __raw_readq(&tx4939_ccfgptr->pcfg); + + if ((pcfg & TX4939_PCFG_I2SMODE_MASK) == TX4939_PCFG_I2SMODE_ACLC) + txx9_aclc_init(TX4939_ACLC_REG & 0xfffffffffULL, + TXX9_IRQ_BASE + TX4939_IR_ACLC, 1, 0, 1); +} + static void __init tx4939_stop_unused_modules(void) { __u64 pcfg, rst = 0, ckd = 0; diff --git a/arch/mips/txx9/rbtx4927/setup.c b/arch/mips/txx9/rbtx4927/setup.c index 332cdbc..ee468ea 100644 --- a/arch/mips/txx9/rbtx4927/setup.c +++ b/arch/mips/txx9/rbtx4927/setup.c @@ -337,10 +337,14 @@ static void __init rbtx4927_device_init(void) rbtx4927_ne_init(); tx4927_wdt_init(); rbtx4927_mtd_init(); - if (TX4927_REV_PCODE() == 0x4927) + if (TX4927_REV_PCODE() == 0x4927) { tx4927_dmac_init(2); - else + tx4927_aclc_init(0, 1); + } else { tx4938_dmac_init(0, 2); + tx4938_aclc_init(); + } + platform_device_register_simple("txx9aclc-generic", -1, NULL, 0); txx9_iocled_init(RBTX4927_LED_ADDR - IO_BASE, -1, 3, 1, "green", NULL); rbtx4927_gpioled_init(); } diff --git a/arch/mips/txx9/rbtx4938/setup.c b/arch/mips/txx9/rbtx4938/setup.c index 37c5e3d..8da66e9 100644 --- a/arch/mips/txx9/rbtx4938/setup.c +++ b/arch/mips/txx9/rbtx4938/setup.c @@ -356,6 +356,8 @@ static void __init rbtx4938_device_init(void) tx4938_ndfmc_init(10, 35); tx4938_ata_init(RBTX4938_IRQ_IOC_ATA, 0, 1); tx4938_dmac_init(0, 2); + tx4938_aclc_init(); + platform_device_register_simple("txx9aclc-generic", -1, NULL, 0); txx9_iocled_init(RBTX4938_LED_ADDR - IO_BASE, -1, 8, 1, "green", NULL); } diff --git a/arch/mips/txx9/rbtx4939/setup.c b/arch/mips/txx9/rbtx4939/setup.c index 91f2ec8..d5ad5ab 100644 --- a/arch/mips/txx9/rbtx4939/setup.c +++ b/arch/mips/txx9/rbtx4939/setup.c @@ -499,6 +499,8 @@ static void __init rbtx4939_device_init(void) tx4939_ata_init(); tx4939_rtc_init(); tx4939_dmac_init(0, 2); + tx4939_aclc_init(); + platform_device_register_simple("txx9aclc-generic", -1, NULL, 0); } static void __init rbtx4939_setup(void) -- cgit v1.1 From e6f72d3abafd50984decc2833c706e717f5ba04e Mon Sep 17 00:00:00 2001 From: David Daney <ddaney@caviumnetworks.com> Date: Wed, 20 May 2009 11:40:58 -0700 Subject: MIPS: Replace some magic numbers with symbolic values in tlbex.c The logic used to split the r4000 refill handler is liberally sprinkled with magic numbers. We attempt to explain what they are and normalize them against a new symbolic value (MIPS64_REFILL_INSNS). CC: David VomLehn <dvomlehn@cisco.com> Reviewed-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/mm/tlbex.c | 34 ++++++++++++++++++++++++++-------- 1 file changed, 26 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index 0615b62..678e633 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -649,6 +649,14 @@ static void __cpuinit build_update_entries(u32 **p, unsigned int tmp, #endif } +/* + * For a 64-bit kernel, we are using the 64-bit XTLB refill exception + * because EXL == 0. If we wrap, we can also use the 32 instruction + * slots before the XTLB refill exception handler which belong to the + * unused TLB refill exception. + */ +#define MIPS64_REFILL_INSNS 32 + static void __cpuinit build_r4000_tlb_refill_handler(void) { u32 *p = tlb_handler; @@ -702,9 +710,10 @@ static void __cpuinit build_r4000_tlb_refill_handler(void) if ((p - tlb_handler) > 64) panic("TLB refill handler space exceeded"); #else - if (((p - tlb_handler) > 63) - || (((p - tlb_handler) > 61) - && uasm_insn_has_bdelay(relocs, tlb_handler + 29))) + if (((p - tlb_handler) > (MIPS64_REFILL_INSNS * 2) - 1) + || (((p - tlb_handler) > (MIPS64_REFILL_INSNS * 2) - 3) + && uasm_insn_has_bdelay(relocs, + tlb_handler + MIPS64_REFILL_INSNS - 3))) panic("TLB refill handler space exceeded"); #endif @@ -717,16 +726,24 @@ static void __cpuinit build_r4000_tlb_refill_handler(void) uasm_copy_handler(relocs, labels, tlb_handler, p, f); final_len = p - tlb_handler; #else /* CONFIG_64BIT */ - f = final_handler + 32; - if ((p - tlb_handler) <= 32) { + f = final_handler + MIPS64_REFILL_INSNS; + if ((p - tlb_handler) <= MIPS64_REFILL_INSNS) { /* Just copy the handler. */ uasm_copy_handler(relocs, labels, tlb_handler, p, f); final_len = p - tlb_handler; } else { - u32 *split = tlb_handler + 30; + /* + * Split two instructions before the end. One for the + * branch and one for the instruction in the delay + * slot. + */ + u32 *split = tlb_handler + MIPS64_REFILL_INSNS - 2; /* - * Find the split point. + * Find the split point. If the branch would fall in + * a delay slot, we must back up an additional + * instruction so that it is no longer in a delay + * slot. */ if (uasm_insn_has_bdelay(relocs, split - 1)) split--; @@ -749,7 +766,8 @@ static void __cpuinit build_r4000_tlb_refill_handler(void) /* Copy the rest of the handler. */ uasm_copy_handler(relocs, labels, split, p, final_handler); - final_len = (f - (final_handler + 32)) + (p - split); + final_len = (f - (final_handler + MIPS64_REFILL_INSNS)) + + (p - split); } #endif /* CONFIG_64BIT */ -- cgit v1.1 From 95affdda9bfba0ac17025d48c622e1f30964e316 Mon Sep 17 00:00:00 2001 From: David Daney <ddaney@caviumnetworks.com> Date: Wed, 20 May 2009 11:40:59 -0700 Subject: MIPS: Fold the TLB refill at the vmalloc path if possible. Try to fold the 64-bit TLB refill handler opportunistically at the beginning of the vmalloc path so as to avoid splitting execution flow in half and wasting cycles for a branch required at that point then. Resort to doing the split if either of the newly created parts would not fit into its designated slot. Original-patch-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/mm/tlbex.c | 73 +++++++++++++++++++++++++++++++++++----------------- 1 file changed, 49 insertions(+), 24 deletions(-) (limited to 'arch') diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index 678e633..d9a18b2 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -6,7 +6,7 @@ * Synthesize TLB refill handlers at runtime. * * Copyright (C) 2004, 2005, 2006, 2008 Thiemo Seufer - * Copyright (C) 2005, 2007 Maciej W. Rozycki + * Copyright (C) 2005, 2007, 2008, 2009 Maciej W. Rozycki * Copyright (C) 2006 Ralf Baechle (ralf@linux-mips.org) * * ... and the days got worse and worse and now you see @@ -19,6 +19,7 @@ * (Condolences to Napoleon XIV) */ +#include <linux/bug.h> #include <linux/kernel.h> #include <linux/types.h> #include <linux/string.h> @@ -732,36 +733,60 @@ static void __cpuinit build_r4000_tlb_refill_handler(void) uasm_copy_handler(relocs, labels, tlb_handler, p, f); final_len = p - tlb_handler; } else { - /* - * Split two instructions before the end. One for the - * branch and one for the instruction in the delay - * slot. - */ - u32 *split = tlb_handler + MIPS64_REFILL_INSNS - 2; +#ifdef MODULE_START + const enum label_id ls = label_module_alloc; +#else + const enum label_id ls = label_vmalloc; +#endif + u32 *split; + int ov = 0; + int i; + + for (i = 0; i < ARRAY_SIZE(labels) && labels[i].lab != ls; i++) + ; + BUG_ON(i == ARRAY_SIZE(labels)); + split = labels[i].addr; /* - * Find the split point. If the branch would fall in - * a delay slot, we must back up an additional - * instruction so that it is no longer in a delay - * slot. + * See if we have overflown one way or the other. */ - if (uasm_insn_has_bdelay(relocs, split - 1)) - split--; - + if (split > tlb_handler + MIPS64_REFILL_INSNS || + split < p - MIPS64_REFILL_INSNS) + ov = 1; + + if (ov) { + /* + * Split two instructions before the end. One + * for the branch and one for the instruction + * in the delay slot. + */ + split = tlb_handler + MIPS64_REFILL_INSNS - 2; + + /* + * If the branch would fall in a delay slot, + * we must back up an additional instruction + * so that it is no longer in a delay slot. + */ + if (uasm_insn_has_bdelay(relocs, split - 1)) + split--; + } /* Copy first part of the handler. */ uasm_copy_handler(relocs, labels, tlb_handler, split, f); f += split - tlb_handler; - /* Insert branch. */ - uasm_l_split(&l, final_handler); - uasm_il_b(&f, &r, label_split); - if (uasm_insn_has_bdelay(relocs, split)) - uasm_i_nop(&f); - else { - uasm_copy_handler(relocs, labels, split, split + 1, f); - uasm_move_labels(labels, f, f + 1, -1); - f++; - split++; + if (ov) { + /* Insert branch. */ + uasm_l_split(&l, final_handler); + uasm_il_b(&f, &r, label_split); + if (uasm_insn_has_bdelay(relocs, split)) + uasm_i_nop(&f); + else { + uasm_copy_handler(relocs, labels, + split, split + 1, f); + uasm_move_labels(labels, f, f + 1, -1); + f++; + split++; + } } /* Copy the rest of the handler. */ -- cgit v1.1 From 41f0e4d041aa30507a34998c29d0b7ac0bede277 Mon Sep 17 00:00:00 2001 From: David Daney <ddaney@caviumnetworks.com> Date: Tue, 12 May 2009 12:41:53 -0700 Subject: MIPS: Allow R2 CPUs to turn off generation of 'ehb' instructions. Some CPUs do not need ehb instructions after writing CP0 registers. By allowing ehb generation to be overridden in cpu-feature-overrides.h, we can save a few instructions in the TLB handler hot paths. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/include/asm/cpu-features.h | 4 ++++ arch/mips/mm/tlbex.c | 3 ++- 2 files changed, 6 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/include/asm/cpu-features.h b/arch/mips/include/asm/cpu-features.h index c0047f8..1cba4b2 100644 --- a/arch/mips/include/asm/cpu-features.h +++ b/arch/mips/include/asm/cpu-features.h @@ -147,6 +147,10 @@ #define cpu_has_mips_r (cpu_has_mips32r1 | cpu_has_mips32r2 | \ cpu_has_mips64r1 | cpu_has_mips64r2) +#ifndef cpu_has_mips_r2_exec_hazard +#define cpu_has_mips_r2_exec_hazard cpu_has_mips_r2 +#endif + /* * MIPS32, MIPS64, VR5500, IDT32332, IDT32334 and maybe a few other * pre-MIPS32/MIPS53 processors have CLO, CLZ. For 64-bit kernels diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index d9a18b2..0e34faa 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -259,7 +259,8 @@ static void __cpuinit build_tlb_write_entry(u32 **p, struct uasm_label **l, } if (cpu_has_mips_r2) { - uasm_i_ehb(p); + if (cpu_has_mips_r2_exec_hazard) + uasm_i_ehb(p); tlbw(p); return; } -- cgit v1.1 From 9e290a19f21f4d6c305090d3c61fbfad65908188 Mon Sep 17 00:00:00 2001 From: David Daney <ddaney@caviumnetworks.com> Date: Tue, 12 May 2009 12:41:54 -0700 Subject: MIPS: Remove execution hazard barriers for Octeon. The Octeon has no execution hazards, so we can remove them and save an instruction per TLB handler invocation. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Reviewed by: David VomLehn <dvomlehn@cisco.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h b/arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h index 04ce6e6..bb291f4 100644 --- a/arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h +++ b/arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h @@ -47,6 +47,7 @@ #define cpu_has_mips32r2 0 #define cpu_has_mips64r1 0 #define cpu_has_mips64r2 1 +#define cpu_has_mips_r2_exec_hazard 0 #define cpu_has_dsp 0 #define cpu_has_mipsmt 0 #define cpu_has_userlocal 0 -- cgit v1.1 From faed5288af0f05aa61ac1e8d47306d855a2868f0 Mon Sep 17 00:00:00 2001 From: David Daney <ddaney@caviumnetworks.com> Date: Tue, 12 May 2009 12:41:55 -0700 Subject: MIPS: Remove dead case label. CPU_CAVIUM_OCTEON is mips_r2 which is handled before the switch. This label in the switch statement is dead code, so we remove it. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Reviewed by: David VomLehn <dvomlehn@cisco.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/mm/tlbex.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index 0e34faa..2104aa0 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -312,7 +312,6 @@ static void __cpuinit build_tlb_write_entry(u32 **p, struct uasm_label **l, case CPU_BCM3302: case CPU_BCM4710: case CPU_LOONGSON2: - case CPU_CAVIUM_OCTEON: case CPU_R5500: if (m4kc_tlbp_war()) uasm_i_nop(p); -- cgit v1.1 From 1c99dac8bf0dd5bd1a7600e81d1e5691f7338250 Mon Sep 17 00:00:00 2001 From: Florian Fainelli <florian@openwrt.org> Date: Thu, 21 May 2009 19:49:39 +0200 Subject: MIPS: RB532: Cleanup cpu-features-overrides Remove commented out definitions. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/include/asm/mach-rc32434/cpu-feature-overrides.h | 5 ----- 1 file changed, 5 deletions(-) (limited to 'arch') diff --git a/arch/mips/include/asm/mach-rc32434/cpu-feature-overrides.h b/arch/mips/include/asm/mach-rc32434/cpu-feature-overrides.h index f3bc7ef..c3e4d3a 100644 --- a/arch/mips/include/asm/mach-rc32434/cpu-feature-overrides.h +++ b/arch/mips/include/asm/mach-rc32434/cpu-feature-overrides.h @@ -53,11 +53,6 @@ #define cpu_has_smartmips 0 #define cpu_has_vtag_icache 0 -/* #define cpu_has_dc_aliases ? */ -/* #define cpu_has_ic_fills_f_dc ? */ -/* #define cpu_has_pindexed_dcache ? */ - -/* #define cpu_icache_snoops_remote_store ? */ #define cpu_has_mips32r1 1 #define cpu_has_mips32r2 0 -- cgit v1.1 From d36773e53f4919627d43b1010df096c5d518a1f5 Mon Sep 17 00:00:00 2001 From: Florian Fainelli <florian@openwrt.org> Date: Thu, 21 May 2009 19:49:47 +0200 Subject: MIPS: RB532: Check irq number when handling GPIO interrupts This patch makes sure that we are not going to clear or change the interrupt status of a GPIO interrupt superior to 13 as this is the maximum number of GPIO interrupt source (p.232 of the RC32434 reference manual). Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/rb532/irq.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/mips/rb532/irq.c b/arch/mips/rb532/irq.c index 53eeb5e..f078820 100644 --- a/arch/mips/rb532/irq.c +++ b/arch/mips/rb532/irq.c @@ -151,7 +151,8 @@ static void rb532_disable_irq(unsigned int irq_nr) mask |= intr_bit; WRITE_MASK(addr, mask); - if (group == GPIO_MAPPED_IRQ_GROUP) + /* There is a maximum of 14 GPIO interrupts */ + if (group == GPIO_MAPPED_IRQ_GROUP && irq_nr <= (GROUP4_IRQ_BASE + 13)) rb532_gpio_set_istat(0, irq_nr - GPIO_MAPPED_IRQ_BASE); /* @@ -174,7 +175,7 @@ static int rb532_set_type(unsigned int irq_nr, unsigned type) int gpio = irq_nr - GPIO_MAPPED_IRQ_BASE; int group = irq_to_group(irq_nr); - if (group != GPIO_MAPPED_IRQ_GROUP) + if (group != GPIO_MAPPED_IRQ_GROUP || irq_nr > (GROUP4_IRQ_BASE + 13)) return (type == IRQ_TYPE_LEVEL_HIGH) ? 0 : -EINVAL; switch (type) { -- cgit v1.1 From 435f81f4a24206f82ce10d430fa6f312cee80669 Mon Sep 17 00:00:00 2001 From: Imre Kaloz <kaloz@openwrt.org> Date: Tue, 2 Jun 2009 14:22:00 +0200 Subject: MIPS: Sibyte: Remove simulator option This patch removes the SiByte simulation Kconfig option, which only modified a printk. Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/sibyte/Kconfig | 7 ------- arch/mips/sibyte/swarm/setup.c | 4 ---- 2 files changed, 11 deletions(-) (limited to 'arch') diff --git a/arch/mips/sibyte/Kconfig b/arch/mips/sibyte/Kconfig index 366b19d..989d1a9 100644 --- a/arch/mips/sibyte/Kconfig +++ b/arch/mips/sibyte/Kconfig @@ -128,13 +128,6 @@ config SIBYTE_ENABLE_LDT_IF_PCI bool select SIBYTE_HAS_LDT if PCI -config SIMULATION - bool "Running under simulation" - depends on SIBYTE_SB1xxx_SOC - help - Build a kernel suitable for running under the GDB simulator. - Primarily adjusts the kernel's notion of time. - config SB1_CEX_ALWAYS_FATAL bool "All cache exceptions considered fatal (no recovery attempted)" depends on SIBYTE_SB1xxx_SOC diff --git a/arch/mips/sibyte/swarm/setup.c b/arch/mips/sibyte/swarm/setup.c index 080c966..cffa30a 100644 --- a/arch/mips/sibyte/swarm/setup.c +++ b/arch/mips/sibyte/swarm/setup.c @@ -137,11 +137,7 @@ void __init plat_mem_setup(void) swarm_rtc_type = RTC_M4LT81; printk("This kernel optimized for " -#ifdef CONFIG_SIMULATION - "simulation" -#else "board" -#endif " runs " #ifdef CONFIG_SIBYTE_CFE "with" -- cgit v1.1 From 05f94eebd55ef69a354d3ea70179e40ea4c34de6 Mon Sep 17 00:00:00 2001 From: Imre Kaloz <kaloz@openwrt.org> Date: Tue, 2 Jun 2009 14:22:06 +0200 Subject: MIPS: Sibyte: Remove standalone kernel support CFE is the only supported and used bootloader on the SiByte boards, the standalone kernel support has been never used outside Broadcom. Remove it and make the kernel use CFE by default. Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/Makefile | 1 - arch/mips/sibyte/Kconfig | 24 +-- arch/mips/sibyte/cfe/Makefile | 2 - arch/mips/sibyte/cfe/console.c | 79 -------- arch/mips/sibyte/cfe/setup.c | 344 ---------------------------------- arch/mips/sibyte/common/Makefile | 4 +- arch/mips/sibyte/common/cfe.c | 344 ++++++++++++++++++++++++++++++++++ arch/mips/sibyte/common/cfe_console.c | 79 ++++++++ arch/mips/sibyte/sb1250/Makefile | 1 - arch/mips/sibyte/sb1250/prom.c | 96 ---------- arch/mips/sibyte/swarm/setup.c | 10 - 11 files changed, 428 insertions(+), 556 deletions(-) delete mode 100644 arch/mips/sibyte/cfe/Makefile delete mode 100644 arch/mips/sibyte/cfe/console.c delete mode 100644 arch/mips/sibyte/cfe/setup.c create mode 100644 arch/mips/sibyte/common/cfe.c create mode 100644 arch/mips/sibyte/common/cfe_console.c delete mode 100644 arch/mips/sibyte/sb1250/prom.c (limited to 'arch') diff --git a/arch/mips/Makefile b/arch/mips/Makefile index c4cae9e..52a3509 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -167,7 +167,6 @@ libs-$(CONFIG_ARC) += arch/mips/fw/arc/ libs-$(CONFIG_CFE) += arch/mips/fw/cfe/ libs-$(CONFIG_SNIPROM) += arch/mips/fw/sni/ libs-y += arch/mips/fw/lib/ -libs-$(CONFIG_SIBYTE_CFE) += arch/mips/sibyte/cfe/ # # Board-dependent options and extra files diff --git a/arch/mips/sibyte/Kconfig b/arch/mips/sibyte/Kconfig index 989d1a9..3e639bd 100644 --- a/arch/mips/sibyte/Kconfig +++ b/arch/mips/sibyte/Kconfig @@ -75,6 +75,8 @@ config SIBYTE_SB1xxx_SOC select SWAP_IO_SPACE select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL + select CFE + select SYS_HAS_EARLY_PRINTK choice prompt "SiByte SOC Stepping" @@ -136,34 +138,14 @@ config SB1_CERR_STALL bool "Stall (rather than panic) on fatal cache error" depends on SIBYTE_SB1xxx_SOC -config SIBYTE_CFE - bool "Booting from CFE" - depends on SIBYTE_SB1xxx_SOC - select CFE - select SYS_HAS_EARLY_PRINTK - help - Make use of the CFE API for enumerating available memory, - controlling secondary CPUs, and possibly console output. - config SIBYTE_CFE_CONSOLE bool "Use firmware console" - depends on SIBYTE_CFE + depends on SIBYTE_SB1xxx_SOC help Use the CFE API's console write routines during boot. Other console options (VT console, sb1250 duart console, etc.) should not be configured. -config SIBYTE_STANDALONE - bool - depends on SIBYTE_SB1xxx_SOC && !SIBYTE_CFE - select SYS_HAS_EARLY_PRINTK - default y - -config SIBYTE_STANDALONE_RAM_SIZE - int "Memory size (in megabytes)" - depends on SIBYTE_STANDALONE - default "32" - config SIBYTE_BUS_WATCHER bool "Support for Bus Watcher statistics" depends on SIBYTE_SB1xxx_SOC diff --git a/arch/mips/sibyte/cfe/Makefile b/arch/mips/sibyte/cfe/Makefile deleted file mode 100644 index 02b32e1..0000000 --- a/arch/mips/sibyte/cfe/Makefile +++ /dev/null @@ -1,2 +0,0 @@ -lib-y = setup.o -lib-$(CONFIG_SIBYTE_CFE_CONSOLE) += console.o diff --git a/arch/mips/sibyte/cfe/console.c b/arch/mips/sibyte/cfe/console.c deleted file mode 100644 index 81e3d54..0000000 --- a/arch/mips/sibyte/cfe/console.c +++ /dev/null @@ -1,79 +0,0 @@ -#include <linux/init.h> -#include <linux/errno.h> -#include <linux/console.h> - -#include <asm/sibyte/board.h> - -#include <asm/fw/cfe/cfe_api.h> -#include <asm/fw/cfe/cfe_error.h> - -extern int cfe_cons_handle; - -static void cfe_console_write(struct console *cons, const char *str, - unsigned int count) -{ - int i, last, written; - - for (i=0, last=0; i<count; i++) { - if (!str[i]) - /* XXXKW can/should this ever happen? */ - return; - if (str[i] == '\n') { - do { - written = cfe_write(cfe_cons_handle, &str[last], i-last); - if (written < 0) - ; - last += written; - } while (last < i); - while (cfe_write(cfe_cons_handle, "\r", 1) <= 0) - ; - } - } - if (last != count) { - do { - written = cfe_write(cfe_cons_handle, &str[last], count-last); - if (written < 0) - ; - last += written; - } while (last < count); - } - -} - -static int cfe_console_setup(struct console *cons, char *str) -{ - char consdev[32]; - /* XXXKW think about interaction with 'console=' cmdline arg */ - /* If none of the console options are configured, the build will break. */ - if (cfe_getenv("BOOT_CONSOLE", consdev, 32) >= 0) { -#ifdef CONFIG_SERIAL_SB1250_DUART - if (!strcmp(consdev, "uart0")) { - setleds("u0cn"); - } else if (!strcmp(consdev, "uart1")) { - setleds("u1cn"); -#endif -#ifdef CONFIG_VGA_CONSOLE - } else if (!strcmp(consdev, "pcconsole0")) { - setleds("pccn"); -#endif - } else - return -ENODEV; - } - return 0; -} - -static struct console sb1250_cfe_cons = { - .name = "cfe", - .write = cfe_console_write, - .setup = cfe_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, -}; - -static int __init sb1250_cfe_console_init(void) -{ - register_console(&sb1250_cfe_cons); - return 0; -} - -console_initcall(sb1250_cfe_console_init); diff --git a/arch/mips/sibyte/cfe/setup.c b/arch/mips/sibyte/cfe/setup.c deleted file mode 100644 index eb5396c..0000000 --- a/arch/mips/sibyte/cfe/setup.c +++ /dev/null @@ -1,344 +0,0 @@ -/* - * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/linkage.h> -#include <linux/mm.h> -#include <linux/blkdev.h> -#include <linux/bootmem.h> -#include <linux/pm.h> -#include <linux/smp.h> - -#include <asm/bootinfo.h> -#include <asm/reboot.h> -#include <asm/sibyte/board.h> -#include <asm/smp-ops.h> - -#include <asm/fw/cfe/cfe_api.h> -#include <asm/fw/cfe/cfe_error.h> - -/* Max ram addressable in 32-bit segments */ -#ifdef CONFIG_64BIT -#define MAX_RAM_SIZE (~0ULL) -#else -#ifdef CONFIG_HIGHMEM -#ifdef CONFIG_64BIT_PHYS_ADDR -#define MAX_RAM_SIZE (~0ULL) -#else -#define MAX_RAM_SIZE (0xffffffffULL) -#endif -#else -#define MAX_RAM_SIZE (0x1fffffffULL) -#endif -#endif - -#define SIBYTE_MAX_MEM_REGIONS 8 -phys_t board_mem_region_addrs[SIBYTE_MAX_MEM_REGIONS]; -phys_t board_mem_region_sizes[SIBYTE_MAX_MEM_REGIONS]; -unsigned int board_mem_region_count; - -int cfe_cons_handle; - -#ifdef CONFIG_BLK_DEV_INITRD -extern unsigned long initrd_start, initrd_end; -#endif - -static void __noreturn cfe_linux_exit(void *arg) -{ - int warm = *(int *)arg; - - if (smp_processor_id()) { - static int reboot_smp; - - /* Don't repeat the process from another CPU */ - if (!reboot_smp) { - /* Get CPU 0 to do the cfe_exit */ - reboot_smp = 1; - smp_call_function(cfe_linux_exit, arg, 0); - } - } else { - printk("Passing control back to CFE...\n"); - cfe_exit(warm, 0); - printk("cfe_exit returned??\n"); - } - while (1); -} - -static void __noreturn cfe_linux_restart(char *command) -{ - static const int zero; - - cfe_linux_exit((void *)&zero); -} - -static void __noreturn cfe_linux_halt(void) -{ - static const int one = 1; - - cfe_linux_exit((void *)&one); -} - -static __init void prom_meminit(void) -{ - u64 addr, size, type; /* regardless of 64BIT_PHYS_ADDR */ - int mem_flags = 0; - unsigned int idx; - int rd_flag; -#ifdef CONFIG_BLK_DEV_INITRD - unsigned long initrd_pstart; - unsigned long initrd_pend; - - initrd_pstart = CPHYSADDR(initrd_start); - initrd_pend = CPHYSADDR(initrd_end); - if (initrd_start && - ((initrd_pstart > MAX_RAM_SIZE) - || (initrd_pend > MAX_RAM_SIZE))) { - panic("initrd out of addressable memory"); - } - -#endif /* INITRD */ - - for (idx = 0; cfe_enummem(idx, mem_flags, &addr, &size, &type) != CFE_ERR_NOMORE; - idx++) { - rd_flag = 0; - if (type == CFE_MI_AVAILABLE) { - /* - * See if this block contains (any portion of) the - * ramdisk - */ -#ifdef CONFIG_BLK_DEV_INITRD - if (initrd_start) { - if ((initrd_pstart > addr) && - (initrd_pstart < (addr + size))) { - add_memory_region(addr, - initrd_pstart - addr, - BOOT_MEM_RAM); - rd_flag = 1; - } - if ((initrd_pend > addr) && - (initrd_pend < (addr + size))) { - add_memory_region(initrd_pend, - (addr + size) - initrd_pend, - BOOT_MEM_RAM); - rd_flag = 1; - } - } -#endif - if (!rd_flag) { - if (addr > MAX_RAM_SIZE) - continue; - if (addr+size > MAX_RAM_SIZE) - size = MAX_RAM_SIZE - (addr+size) + 1; - /* - * memcpy/__copy_user prefetch, which - * will cause a bus error for - * KSEG/KUSEG addrs not backed by RAM. - * Hence, reserve some padding for the - * prefetch distance. - */ - if (size > 512) - size -= 512; - add_memory_region(addr, size, BOOT_MEM_RAM); - } - board_mem_region_addrs[board_mem_region_count] = addr; - board_mem_region_sizes[board_mem_region_count] = size; - board_mem_region_count++; - if (board_mem_region_count == - SIBYTE_MAX_MEM_REGIONS) { - /* - * Too many regions. Need to configure more - */ - while(1); - } - } - } -#ifdef CONFIG_BLK_DEV_INITRD - if (initrd_start) { - add_memory_region(initrd_pstart, initrd_pend - initrd_pstart, - BOOT_MEM_RESERVED); - } -#endif -} - -#ifdef CONFIG_BLK_DEV_INITRD -static int __init initrd_setup(char *str) -{ - char rdarg[64]; - int idx; - char *tmp, *endptr; - unsigned long initrd_size; - - /* Make a copy of the initrd argument so we can smash it up here */ - for (idx = 0; idx < sizeof(rdarg)-1; idx++) { - if (!str[idx] || (str[idx] == ' ')) break; - rdarg[idx] = str[idx]; - } - - rdarg[idx] = 0; - str = rdarg; - - /* - *Initrd location comes in the form "<hex size of ramdisk in bytes>@<location in memory>" - * e.g. initrd=3abfd@80010000. This is set up by the loader. - */ - for (tmp = str; *tmp != '@'; tmp++) { - if (!*tmp) { - goto fail; - } - } - *tmp = 0; - tmp++; - if (!*tmp) { - goto fail; - } - initrd_size = simple_strtoul(str, &endptr, 16); - if (*endptr) { - *(tmp-1) = '@'; - goto fail; - } - *(tmp-1) = '@'; - initrd_start = simple_strtoul(tmp, &endptr, 16); - if (*endptr) { - goto fail; - } - initrd_end = initrd_start + initrd_size; - printk("Found initrd of %lx@%lx\n", initrd_size, initrd_start); - return 1; - fail: - printk("Bad initrd argument. Disabling initrd\n"); - initrd_start = 0; - initrd_end = 0; - return 1; -} - -#endif - -extern struct plat_smp_ops sb_smp_ops; -extern struct plat_smp_ops bcm1480_smp_ops; - -/* - * prom_init is called just after the cpu type is determined, from setup_arch() - */ -void __init prom_init(void) -{ - uint64_t cfe_ept, cfe_handle; - unsigned int cfe_eptseal; - int argc = fw_arg0; - char **envp = (char **) fw_arg2; - int *prom_vec = (int *) fw_arg3; - - _machine_restart = cfe_linux_restart; - _machine_halt = cfe_linux_halt; - pm_power_off = cfe_linux_halt; - - /* - * Check if a loader was used; if NOT, the 4 arguments are - * what CFE gives us (handle, 0, EPT and EPTSEAL) - */ - if (argc < 0) { - cfe_handle = (uint64_t)(long)argc; - cfe_ept = (long)envp; - cfe_eptseal = (uint32_t)(unsigned long)prom_vec; - } else { - if ((int32_t)(long)prom_vec < 0) { - /* - * Old loader; all it gives us is the handle, - * so use the "known" entrypoint and assume - * the seal. - */ - cfe_handle = (uint64_t)(long)prom_vec; - cfe_ept = (uint64_t)((int32_t)0x9fc00500); - cfe_eptseal = CFE_EPTSEAL; - } else { - /* - * Newer loaders bundle the handle/ept/eptseal - * Note: prom_vec is in the loader's useg - * which is still alive in the TLB. - */ - cfe_handle = (uint64_t)((int32_t *)prom_vec)[0]; - cfe_ept = (uint64_t)((int32_t *)prom_vec)[2]; - cfe_eptseal = (unsigned int)((uint32_t *)prom_vec)[3]; - } - } - if (cfe_eptseal != CFE_EPTSEAL) { - /* too early for panic to do any good */ - printk("CFE's entrypoint seal doesn't match. Spinning."); - while (1) ; - } - cfe_init(cfe_handle, cfe_ept); - /* - * Get the handle for (at least) prom_putchar, possibly for - * boot console - */ - cfe_cons_handle = cfe_getstdhandle(CFE_STDHANDLE_CONSOLE); - if (cfe_getenv("LINUX_CMDLINE", arcs_cmdline, CL_SIZE) < 0) { - if (argc >= 0) { - /* The loader should have set the command line */ - /* too early for panic to do any good */ - printk("LINUX_CMDLINE not defined in cfe."); - while (1) ; - } - } - -#ifdef CONFIG_BLK_DEV_INITRD - { - char *ptr; - /* Need to find out early whether we've got an initrd. So scan - the list looking now */ - for (ptr = arcs_cmdline; *ptr; ptr++) { - while (*ptr == ' ') { - ptr++; - } - if (!strncmp(ptr, "initrd=", 7)) { - initrd_setup(ptr+7); - break; - } else { - while (*ptr && (*ptr != ' ')) { - ptr++; - } - } - } - } -#endif /* CONFIG_BLK_DEV_INITRD */ - - /* Not sure this is needed, but it's the safe way. */ - arcs_cmdline[CL_SIZE-1] = 0; - - prom_meminit(); - -#if defined(CONFIG_SIBYTE_BCM112X) || defined(CONFIG_SIBYTE_SB1250) - register_smp_ops(&sb_smp_ops); -#endif -#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80) - register_smp_ops(&bcm1480_smp_ops); -#endif -} - -void __init prom_free_prom_memory(void) -{ - /* Not sure what I'm supposed to do here. Nothing, I think */ -} - -void prom_putchar(char c) -{ - int ret; - - while ((ret = cfe_write(cfe_cons_handle, &c, 1)) == 0) - ; -} diff --git a/arch/mips/sibyte/common/Makefile b/arch/mips/sibyte/common/Makefile index 48a91b9..4f65983 100644 --- a/arch/mips/sibyte/common/Makefile +++ b/arch/mips/sibyte/common/Makefile @@ -1,5 +1,5 @@ -obj-y := - +obj-y := cfe.o +obj-$(CONFIG_SIBYTE_CFE_CONSOLE) += cfe_console.o obj-$(CONFIG_SIBYTE_TBPROF) += sb_tbprof.o EXTRA_CFLAGS += -Werror diff --git a/arch/mips/sibyte/common/cfe.c b/arch/mips/sibyte/common/cfe.c new file mode 100644 index 0000000..eb5396c --- /dev/null +++ b/arch/mips/sibyte/common/cfe.c @@ -0,0 +1,344 @@ +/* + * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/linkage.h> +#include <linux/mm.h> +#include <linux/blkdev.h> +#include <linux/bootmem.h> +#include <linux/pm.h> +#include <linux/smp.h> + +#include <asm/bootinfo.h> +#include <asm/reboot.h> +#include <asm/sibyte/board.h> +#include <asm/smp-ops.h> + +#include <asm/fw/cfe/cfe_api.h> +#include <asm/fw/cfe/cfe_error.h> + +/* Max ram addressable in 32-bit segments */ +#ifdef CONFIG_64BIT +#define MAX_RAM_SIZE (~0ULL) +#else +#ifdef CONFIG_HIGHMEM +#ifdef CONFIG_64BIT_PHYS_ADDR +#define MAX_RAM_SIZE (~0ULL) +#else +#define MAX_RAM_SIZE (0xffffffffULL) +#endif +#else +#define MAX_RAM_SIZE (0x1fffffffULL) +#endif +#endif + +#define SIBYTE_MAX_MEM_REGIONS 8 +phys_t board_mem_region_addrs[SIBYTE_MAX_MEM_REGIONS]; +phys_t board_mem_region_sizes[SIBYTE_MAX_MEM_REGIONS]; +unsigned int board_mem_region_count; + +int cfe_cons_handle; + +#ifdef CONFIG_BLK_DEV_INITRD +extern unsigned long initrd_start, initrd_end; +#endif + +static void __noreturn cfe_linux_exit(void *arg) +{ + int warm = *(int *)arg; + + if (smp_processor_id()) { + static int reboot_smp; + + /* Don't repeat the process from another CPU */ + if (!reboot_smp) { + /* Get CPU 0 to do the cfe_exit */ + reboot_smp = 1; + smp_call_function(cfe_linux_exit, arg, 0); + } + } else { + printk("Passing control back to CFE...\n"); + cfe_exit(warm, 0); + printk("cfe_exit returned??\n"); + } + while (1); +} + +static void __noreturn cfe_linux_restart(char *command) +{ + static const int zero; + + cfe_linux_exit((void *)&zero); +} + +static void __noreturn cfe_linux_halt(void) +{ + static const int one = 1; + + cfe_linux_exit((void *)&one); +} + +static __init void prom_meminit(void) +{ + u64 addr, size, type; /* regardless of 64BIT_PHYS_ADDR */ + int mem_flags = 0; + unsigned int idx; + int rd_flag; +#ifdef CONFIG_BLK_DEV_INITRD + unsigned long initrd_pstart; + unsigned long initrd_pend; + + initrd_pstart = CPHYSADDR(initrd_start); + initrd_pend = CPHYSADDR(initrd_end); + if (initrd_start && + ((initrd_pstart > MAX_RAM_SIZE) + || (initrd_pend > MAX_RAM_SIZE))) { + panic("initrd out of addressable memory"); + } + +#endif /* INITRD */ + + for (idx = 0; cfe_enummem(idx, mem_flags, &addr, &size, &type) != CFE_ERR_NOMORE; + idx++) { + rd_flag = 0; + if (type == CFE_MI_AVAILABLE) { + /* + * See if this block contains (any portion of) the + * ramdisk + */ +#ifdef CONFIG_BLK_DEV_INITRD + if (initrd_start) { + if ((initrd_pstart > addr) && + (initrd_pstart < (addr + size))) { + add_memory_region(addr, + initrd_pstart - addr, + BOOT_MEM_RAM); + rd_flag = 1; + } + if ((initrd_pend > addr) && + (initrd_pend < (addr + size))) { + add_memory_region(initrd_pend, + (addr + size) - initrd_pend, + BOOT_MEM_RAM); + rd_flag = 1; + } + } +#endif + if (!rd_flag) { + if (addr > MAX_RAM_SIZE) + continue; + if (addr+size > MAX_RAM_SIZE) + size = MAX_RAM_SIZE - (addr+size) + 1; + /* + * memcpy/__copy_user prefetch, which + * will cause a bus error for + * KSEG/KUSEG addrs not backed by RAM. + * Hence, reserve some padding for the + * prefetch distance. + */ + if (size > 512) + size -= 512; + add_memory_region(addr, size, BOOT_MEM_RAM); + } + board_mem_region_addrs[board_mem_region_count] = addr; + board_mem_region_sizes[board_mem_region_count] = size; + board_mem_region_count++; + if (board_mem_region_count == + SIBYTE_MAX_MEM_REGIONS) { + /* + * Too many regions. Need to configure more + */ + while(1); + } + } + } +#ifdef CONFIG_BLK_DEV_INITRD + if (initrd_start) { + add_memory_region(initrd_pstart, initrd_pend - initrd_pstart, + BOOT_MEM_RESERVED); + } +#endif +} + +#ifdef CONFIG_BLK_DEV_INITRD +static int __init initrd_setup(char *str) +{ + char rdarg[64]; + int idx; + char *tmp, *endptr; + unsigned long initrd_size; + + /* Make a copy of the initrd argument so we can smash it up here */ + for (idx = 0; idx < sizeof(rdarg)-1; idx++) { + if (!str[idx] || (str[idx] == ' ')) break; + rdarg[idx] = str[idx]; + } + + rdarg[idx] = 0; + str = rdarg; + + /* + *Initrd location comes in the form "<hex size of ramdisk in bytes>@<location in memory>" + * e.g. initrd=3abfd@80010000. This is set up by the loader. + */ + for (tmp = str; *tmp != '@'; tmp++) { + if (!*tmp) { + goto fail; + } + } + *tmp = 0; + tmp++; + if (!*tmp) { + goto fail; + } + initrd_size = simple_strtoul(str, &endptr, 16); + if (*endptr) { + *(tmp-1) = '@'; + goto fail; + } + *(tmp-1) = '@'; + initrd_start = simple_strtoul(tmp, &endptr, 16); + if (*endptr) { + goto fail; + } + initrd_end = initrd_start + initrd_size; + printk("Found initrd of %lx@%lx\n", initrd_size, initrd_start); + return 1; + fail: + printk("Bad initrd argument. Disabling initrd\n"); + initrd_start = 0; + initrd_end = 0; + return 1; +} + +#endif + +extern struct plat_smp_ops sb_smp_ops; +extern struct plat_smp_ops bcm1480_smp_ops; + +/* + * prom_init is called just after the cpu type is determined, from setup_arch() + */ +void __init prom_init(void) +{ + uint64_t cfe_ept, cfe_handle; + unsigned int cfe_eptseal; + int argc = fw_arg0; + char **envp = (char **) fw_arg2; + int *prom_vec = (int *) fw_arg3; + + _machine_restart = cfe_linux_restart; + _machine_halt = cfe_linux_halt; + pm_power_off = cfe_linux_halt; + + /* + * Check if a loader was used; if NOT, the 4 arguments are + * what CFE gives us (handle, 0, EPT and EPTSEAL) + */ + if (argc < 0) { + cfe_handle = (uint64_t)(long)argc; + cfe_ept = (long)envp; + cfe_eptseal = (uint32_t)(unsigned long)prom_vec; + } else { + if ((int32_t)(long)prom_vec < 0) { + /* + * Old loader; all it gives us is the handle, + * so use the "known" entrypoint and assume + * the seal. + */ + cfe_handle = (uint64_t)(long)prom_vec; + cfe_ept = (uint64_t)((int32_t)0x9fc00500); + cfe_eptseal = CFE_EPTSEAL; + } else { + /* + * Newer loaders bundle the handle/ept/eptseal + * Note: prom_vec is in the loader's useg + * which is still alive in the TLB. + */ + cfe_handle = (uint64_t)((int32_t *)prom_vec)[0]; + cfe_ept = (uint64_t)((int32_t *)prom_vec)[2]; + cfe_eptseal = (unsigned int)((uint32_t *)prom_vec)[3]; + } + } + if (cfe_eptseal != CFE_EPTSEAL) { + /* too early for panic to do any good */ + printk("CFE's entrypoint seal doesn't match. Spinning."); + while (1) ; + } + cfe_init(cfe_handle, cfe_ept); + /* + * Get the handle for (at least) prom_putchar, possibly for + * boot console + */ + cfe_cons_handle = cfe_getstdhandle(CFE_STDHANDLE_CONSOLE); + if (cfe_getenv("LINUX_CMDLINE", arcs_cmdline, CL_SIZE) < 0) { + if (argc >= 0) { + /* The loader should have set the command line */ + /* too early for panic to do any good */ + printk("LINUX_CMDLINE not defined in cfe."); + while (1) ; + } + } + +#ifdef CONFIG_BLK_DEV_INITRD + { + char *ptr; + /* Need to find out early whether we've got an initrd. So scan + the list looking now */ + for (ptr = arcs_cmdline; *ptr; ptr++) { + while (*ptr == ' ') { + ptr++; + } + if (!strncmp(ptr, "initrd=", 7)) { + initrd_setup(ptr+7); + break; + } else { + while (*ptr && (*ptr != ' ')) { + ptr++; + } + } + } + } +#endif /* CONFIG_BLK_DEV_INITRD */ + + /* Not sure this is needed, but it's the safe way. */ + arcs_cmdline[CL_SIZE-1] = 0; + + prom_meminit(); + +#if defined(CONFIG_SIBYTE_BCM112X) || defined(CONFIG_SIBYTE_SB1250) + register_smp_ops(&sb_smp_ops); +#endif +#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80) + register_smp_ops(&bcm1480_smp_ops); +#endif +} + +void __init prom_free_prom_memory(void) +{ + /* Not sure what I'm supposed to do here. Nothing, I think */ +} + +void prom_putchar(char c) +{ + int ret; + + while ((ret = cfe_write(cfe_cons_handle, &c, 1)) == 0) + ; +} diff --git a/arch/mips/sibyte/common/cfe_console.c b/arch/mips/sibyte/common/cfe_console.c new file mode 100644 index 0000000..81e3d54 --- /dev/null +++ b/arch/mips/sibyte/common/cfe_console.c @@ -0,0 +1,79 @@ +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/console.h> + +#include <asm/sibyte/board.h> + +#include <asm/fw/cfe/cfe_api.h> +#include <asm/fw/cfe/cfe_error.h> + +extern int cfe_cons_handle; + +static void cfe_console_write(struct console *cons, const char *str, + unsigned int count) +{ + int i, last, written; + + for (i=0, last=0; i<count; i++) { + if (!str[i]) + /* XXXKW can/should this ever happen? */ + return; + if (str[i] == '\n') { + do { + written = cfe_write(cfe_cons_handle, &str[last], i-last); + if (written < 0) + ; + last += written; + } while (last < i); + while (cfe_write(cfe_cons_handle, "\r", 1) <= 0) + ; + } + } + if (last != count) { + do { + written = cfe_write(cfe_cons_handle, &str[last], count-last); + if (written < 0) + ; + last += written; + } while (last < count); + } + +} + +static int cfe_console_setup(struct console *cons, char *str) +{ + char consdev[32]; + /* XXXKW think about interaction with 'console=' cmdline arg */ + /* If none of the console options are configured, the build will break. */ + if (cfe_getenv("BOOT_CONSOLE", consdev, 32) >= 0) { +#ifdef CONFIG_SERIAL_SB1250_DUART + if (!strcmp(consdev, "uart0")) { + setleds("u0cn"); + } else if (!strcmp(consdev, "uart1")) { + setleds("u1cn"); +#endif +#ifdef CONFIG_VGA_CONSOLE + } else if (!strcmp(consdev, "pcconsole0")) { + setleds("pccn"); +#endif + } else + return -ENODEV; + } + return 0; +} + +static struct console sb1250_cfe_cons = { + .name = "cfe", + .write = cfe_console_write, + .setup = cfe_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, +}; + +static int __init sb1250_cfe_console_init(void) +{ + register_console(&sb1250_cfe_cons); + return 0; +} + +console_initcall(sb1250_cfe_console_init); diff --git a/arch/mips/sibyte/sb1250/Makefile b/arch/mips/sibyte/sb1250/Makefile index 6977937..1896f4e 100644 --- a/arch/mips/sibyte/sb1250/Makefile +++ b/arch/mips/sibyte/sb1250/Makefile @@ -1,7 +1,6 @@ obj-y := setup.o irq.o time.o obj-$(CONFIG_SMP) += smp.o -obj-$(CONFIG_SIBYTE_STANDALONE) += prom.o obj-$(CONFIG_SIBYTE_BUS_WATCHER) += bus_watcher.o EXTRA_CFLAGS += -Werror diff --git a/arch/mips/sibyte/sb1250/prom.c b/arch/mips/sibyte/sb1250/prom.c deleted file mode 100644 index 65b1af6..0000000 --- a/arch/mips/sibyte/sb1250/prom.c +++ /dev/null @@ -1,96 +0,0 @@ -/* - * Copyright (C) 2000, 2001 Broadcom Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/blkdev.h> -#include <linux/bootmem.h> -#include <linux/smp.h> -#include <linux/initrd.h> -#include <linux/pm.h> - -#include <asm/bootinfo.h> -#include <asm/reboot.h> - -#define MAX_RAM_SIZE ((CONFIG_SIBYTE_STANDALONE_RAM_SIZE * 1024 * 1024) - 1) - -static __init void prom_meminit(void) -{ -#ifdef CONFIG_BLK_DEV_INITRD - unsigned long initrd_pstart; - unsigned long initrd_pend; - - initrd_pstart = __pa(initrd_start); - initrd_pend = __pa(initrd_end); - if (initrd_start && - ((initrd_pstart > MAX_RAM_SIZE) - || (initrd_pend > MAX_RAM_SIZE))) { - panic("initrd out of addressable memory"); - } - - add_memory_region(0, initrd_pstart, - BOOT_MEM_RAM); - add_memory_region(initrd_pstart, initrd_pend - initrd_pstart, - BOOT_MEM_RESERVED); - add_memory_region(initrd_pend, - (CONFIG_SIBYTE_STANDALONE_RAM_SIZE * 1024 * 1024) - initrd_pend, - BOOT_MEM_RAM); -#else - add_memory_region(0, CONFIG_SIBYTE_STANDALONE_RAM_SIZE * 1024 * 1024, - BOOT_MEM_RAM); -#endif -} - -void prom_cpu0_exit(void *unused) -{ - while (1) ; -} - -static void prom_linux_exit(void) -{ -#ifdef CONFIG_SMP - if (smp_processor_id()) { - smp_call_function(prom_cpu0_exit, NULL, 1); - } -#endif - while(1); -} - -/* - * prom_init is called just after the cpu type is determined, from setup_arch() - */ -void __init prom_init(void) -{ - _machine_restart = (void (*)(char *))prom_linux_exit; - _machine_halt = prom_linux_exit; - pm_power_off = prom_linux_exit; - - strcpy(arcs_cmdline, "root=/dev/ram0 "); - - prom_meminit(); -} - -void __init prom_free_prom_memory(void) -{ - /* Not sure what I'm supposed to do here. Nothing, I think */ -} - -void prom_putchar(char c) -{ -} diff --git a/arch/mips/sibyte/swarm/setup.c b/arch/mips/sibyte/swarm/setup.c index cffa30a..672e45d 100644 --- a/arch/mips/sibyte/swarm/setup.c +++ b/arch/mips/sibyte/swarm/setup.c @@ -136,16 +136,6 @@ void __init plat_mem_setup(void) if (m41t81_probe()) swarm_rtc_type = RTC_M4LT81; - printk("This kernel optimized for " - "board" - " runs " -#ifdef CONFIG_SIBYTE_CFE - "with" -#else - "without" -#endif - " CFE\n"); - #ifdef CONFIG_VT screen_info = (struct screen_info) { 0, 0, /* orig-x, orig-y */ -- cgit v1.1 From c3b28ae260d99a5364a31210a36a3246bd9647f7 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Date: Mon, 25 May 2009 22:04:02 +0900 Subject: MIPS: TXx9: Add SRAMC support Add a sysdev to access SRAM in TXx9 SoCs via sysfs. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/include/asm/txx9/generic.h | 1 + arch/mips/include/asm/txx9/tx4938.h | 1 + arch/mips/include/asm/txx9/tx4939.h | 1 + arch/mips/txx9/generic/setup.c | 84 +++++++++++++++++++++++++++++++++++ arch/mips/txx9/generic/setup_tx4938.c | 6 +++ arch/mips/txx9/generic/setup_tx4939.c | 6 +++ arch/mips/txx9/rbtx4938/setup.c | 1 + arch/mips/txx9/rbtx4939/setup.c | 1 + 8 files changed, 101 insertions(+) (limited to 'arch') diff --git a/arch/mips/include/asm/txx9/generic.h b/arch/mips/include/asm/txx9/generic.h index 8169477..827dc22 100644 --- a/arch/mips/include/asm/txx9/generic.h +++ b/arch/mips/include/asm/txx9/generic.h @@ -95,5 +95,6 @@ void __init txx9_aclc_init(unsigned long baseaddr, int irq, unsigned int dmac_id, unsigned int dma_chan_out, unsigned int dma_chan_in); +void __init txx9_sramc_init(struct resource *r); #endif /* __ASM_TXX9_GENERIC_H */ diff --git a/arch/mips/include/asm/txx9/tx4938.h b/arch/mips/include/asm/txx9/tx4938.h index 54e4674..8a178f1 100644 --- a/arch/mips/include/asm/txx9/tx4938.h +++ b/arch/mips/include/asm/txx9/tx4938.h @@ -307,5 +307,6 @@ struct tx4938ide_platform_info { void tx4938_ata_init(unsigned int irq, unsigned int shift, int tune); void tx4938_dmac_init(int memcpy_chan0, int memcpy_chan1); void tx4938_aclc_init(void); +void tx4938_sramc_init(void); #endif diff --git a/arch/mips/include/asm/txx9/tx4939.h b/arch/mips/include/asm/txx9/tx4939.h index f13b708..050364d 100644 --- a/arch/mips/include/asm/txx9/tx4939.h +++ b/arch/mips/include/asm/txx9/tx4939.h @@ -546,5 +546,6 @@ void tx4939_ndfmc_init(unsigned int hold, unsigned int spw, unsigned char ch_mask, unsigned char wide_mask); void tx4939_dmac_init(int memcpy_chan0, int memcpy_chan1); void tx4939_aclc_init(void); +void tx4939_sramc_init(void); #endif /* __ASM_TXX9_TX4939_H */ diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c index 7f91012..3b7d77d 100644 --- a/arch/mips/txx9/generic/setup.c +++ b/arch/mips/txx9/generic/setup.c @@ -24,6 +24,7 @@ #include <linux/serial_core.h> #include <linux/mtd/physmap.h> #include <linux/leds.h> +#include <linux/sysdev.h> #include <asm/bootinfo.h> #include <asm/time.h> #include <asm/reboot.h> @@ -912,3 +913,86 @@ void __init txx9_aclc_init(unsigned long baseaddr, int irq, platform_device_put(pdev); #endif } + +static struct sysdev_class txx9_sramc_sysdev_class; + +struct txx9_sramc_sysdev { + struct sys_device dev; + struct bin_attribute bindata_attr; + void __iomem *base; +}; + +static ssize_t txx9_sram_read(struct kobject *kobj, + struct bin_attribute *bin_attr, + char *buf, loff_t pos, size_t size) +{ + struct txx9_sramc_sysdev *dev = bin_attr->private; + size_t ramsize = bin_attr->size; + + if (pos >= ramsize) + return 0; + if (pos + size > ramsize) + size = ramsize - pos; + memcpy_fromio(buf, dev->base + pos, size); + return size; +} + +static ssize_t txx9_sram_write(struct kobject *kobj, + struct bin_attribute *bin_attr, + char *buf, loff_t pos, size_t size) +{ + struct txx9_sramc_sysdev *dev = bin_attr->private; + size_t ramsize = bin_attr->size; + + if (pos >= ramsize) + return 0; + if (pos + size > ramsize) + size = ramsize - pos; + memcpy_toio(dev->base + pos, buf, size); + return size; +} + +void __init txx9_sramc_init(struct resource *r) +{ + struct txx9_sramc_sysdev *dev; + size_t size; + int err; + + if (!txx9_sramc_sysdev_class.name) { + txx9_sramc_sysdev_class.name = "txx9_sram"; + err = sysdev_class_register(&txx9_sramc_sysdev_class); + if (err) { + txx9_sramc_sysdev_class.name = NULL; + return; + } + } + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (!dev) + return; + size = resource_size(r); + dev->base = ioremap(r->start, size); + if (!dev->base) + goto exit; + dev->dev.cls = &txx9_sramc_sysdev_class; + dev->bindata_attr.attr.name = "bindata"; + dev->bindata_attr.attr.mode = S_IRUSR | S_IWUSR; + dev->bindata_attr.read = txx9_sram_read; + dev->bindata_attr.write = txx9_sram_write; + dev->bindata_attr.size = size; + dev->bindata_attr.private = dev; + err = sysdev_register(&dev->dev); + if (err) + goto exit; + err = sysfs_create_bin_file(&dev->dev.kobj, &dev->bindata_attr); + if (err) { + sysdev_unregister(&dev->dev); + goto exit; + } + return; +exit: + if (dev) { + if (dev->base) + iounmap(dev->base); + kfree(dev); + } +} diff --git a/arch/mips/txx9/generic/setup_tx4938.c b/arch/mips/txx9/generic/setup_tx4938.c index 4dfdb52..eb20801 100644 --- a/arch/mips/txx9/generic/setup_tx4938.c +++ b/arch/mips/txx9/generic/setup_tx4938.c @@ -425,6 +425,12 @@ void __init tx4938_aclc_init(void) 1, 0, 1); } +void __init tx4938_sramc_init(void) +{ + if (tx4938_sram_resource.start) + txx9_sramc_init(&tx4938_sram_resource); +} + static void __init tx4938_stop_unused_modules(void) { __u64 pcfg, rst = 0, ckd = 0; diff --git a/arch/mips/txx9/generic/setup_tx4939.c b/arch/mips/txx9/generic/setup_tx4939.c index 7139686..df13a89 100644 --- a/arch/mips/txx9/generic/setup_tx4939.c +++ b/arch/mips/txx9/generic/setup_tx4939.c @@ -494,6 +494,12 @@ void __init tx4939_aclc_init(void) TXX9_IRQ_BASE + TX4939_IR_ACLC, 1, 0, 1); } +void __init tx4939_sramc_init(void) +{ + if (tx4939_sram_resource.start) + txx9_sramc_init(&tx4939_sram_resource); +} + static void __init tx4939_stop_unused_modules(void) { __u64 pcfg, rst = 0, ckd = 0; diff --git a/arch/mips/txx9/rbtx4938/setup.c b/arch/mips/txx9/rbtx4938/setup.c index 8da66e9..d66509b 100644 --- a/arch/mips/txx9/rbtx4938/setup.c +++ b/arch/mips/txx9/rbtx4938/setup.c @@ -358,6 +358,7 @@ static void __init rbtx4938_device_init(void) tx4938_dmac_init(0, 2); tx4938_aclc_init(); platform_device_register_simple("txx9aclc-generic", -1, NULL, 0); + tx4938_sramc_init(); txx9_iocled_init(RBTX4938_LED_ADDR - IO_BASE, -1, 8, 1, "green", NULL); } diff --git a/arch/mips/txx9/rbtx4939/setup.c b/arch/mips/txx9/rbtx4939/setup.c index d5ad5ab..b919696 100644 --- a/arch/mips/txx9/rbtx4939/setup.c +++ b/arch/mips/txx9/rbtx4939/setup.c @@ -501,6 +501,7 @@ static void __init rbtx4939_device_init(void) tx4939_dmac_init(0, 2); tx4939_aclc_init(); platform_device_register_simple("txx9aclc-generic", -1, NULL, 0); + tx4939_sramc_init(); } static void __init rbtx4939_setup(void) -- cgit v1.1 From 923e3819005e60449ed6c9c8a86fd8e5cd9e6d77 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Date: Tue, 2 Jun 2009 23:54:22 +0900 Subject: MIPS: TXx9: Add TX4939 RNG support Add platform support for RNG of TX4939 SoC. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/include/asm/txx9/tx4939.h | 3 +++ arch/mips/txx9/generic/setup_tx4939.c | 17 +++++++++++++++++ arch/mips/txx9/rbtx4939/setup.c | 1 + 3 files changed, 21 insertions(+) (limited to 'arch') diff --git a/arch/mips/include/asm/txx9/tx4939.h b/arch/mips/include/asm/txx9/tx4939.h index 050364d..d4f342c 100644 --- a/arch/mips/include/asm/txx9/tx4939.h +++ b/arch/mips/include/asm/txx9/tx4939.h @@ -45,6 +45,8 @@ #define TX4939_RTC_REG (TX4939_REG_BASE + 0xfb00) #define TX4939_CIR_REG (TX4939_REG_BASE + 0xfc00) +#define TX4939_RNG_REG (TX4939_CRYPTO_REG + 0xb0) + struct tx4939_le_reg { __u32 r; __u32 unused; @@ -547,5 +549,6 @@ void tx4939_ndfmc_init(unsigned int hold, unsigned int spw, void tx4939_dmac_init(int memcpy_chan0, int memcpy_chan1); void tx4939_aclc_init(void); void tx4939_sramc_init(void); +void tx4939_rng_init(void); #endif /* __ASM_TXX9_TX4939_H */ diff --git a/arch/mips/txx9/generic/setup_tx4939.c b/arch/mips/txx9/generic/setup_tx4939.c index df13a89..3dc19f4 100644 --- a/arch/mips/txx9/generic/setup_tx4939.c +++ b/arch/mips/txx9/generic/setup_tx4939.c @@ -500,6 +500,23 @@ void __init tx4939_sramc_init(void) txx9_sramc_init(&tx4939_sram_resource); } +void __init tx4939_rng_init(void) +{ + static struct resource res = { + .start = TX4939_RNG_REG & 0xfffffffffULL, + .end = (TX4939_RNG_REG & 0xfffffffffULL) + 0x30 - 1, + .flags = IORESOURCE_MEM, + }; + static struct platform_device pdev = { + .name = "tx4939-rng", + .id = -1, + .num_resources = 1, + .resource = &res, + }; + + platform_device_register(&pdev); +} + static void __init tx4939_stop_unused_modules(void) { __u64 pcfg, rst = 0, ckd = 0; diff --git a/arch/mips/txx9/rbtx4939/setup.c b/arch/mips/txx9/rbtx4939/setup.c index b919696..c033ffe 100644 --- a/arch/mips/txx9/rbtx4939/setup.c +++ b/arch/mips/txx9/rbtx4939/setup.c @@ -502,6 +502,7 @@ static void __init rbtx4939_device_init(void) tx4939_aclc_init(); platform_device_register_simple("txx9aclc-generic", -1, NULL, 0); tx4939_sramc_init(); + tx4939_rng_init(); } static void __init rbtx4939_setup(void) -- cgit v1.1 From cc906f8e237770cf22d132dfa27ea586d67f7bf2 Mon Sep 17 00:00:00 2001 From: Ralf Baechle <ralf@linux-mips.org> Date: Wed, 17 Jun 2009 11:06:28 +0100 Subject: MIPS: ioctl.h: Cleanup. o Rewrite to use <asm-generic/ioctl.h>. Cuts down the file from 40 to 16 lines. o Delete _IOC_VOID, _IOC_OUT, _IOC_IN and _IOC_INOUT. They were added for 2.1.14 but I was not able to find any user - not even historical ones. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/include/asm/ioctl.h | 85 ++++--------------------------------------- 1 file changed, 7 insertions(+), 78 deletions(-) (limited to 'arch') diff --git a/arch/mips/include/asm/ioctl.h b/arch/mips/include/asm/ioctl.h index 9161634..c515a1a 100644 --- a/arch/mips/include/asm/ioctl.h +++ b/arch/mips/include/asm/ioctl.h @@ -3,40 +3,16 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 1995, 96, 99, 2001 Ralf Baechle + * Copyright (C) 1995, 96, 99, 2001 Ralf Baechle <ralf@linux-mips.org> + * Copyright (C) 2009 Wind River Systems + * Written by Ralf Baechle <ralf@linux-mips.org> */ -#ifndef _ASM_IOCTL_H -#define _ASM_IOCTL_H +#ifndef __ASM_IOCTL_H +#define __ASM_IOCTL_H -/* - * The original linux ioctl numbering scheme was just a general - * "anything goes" setup, where more or less random numbers were - * assigned. Sorry, I was clueless when I started out on this. - * - * On the alpha, we'll try to clean it up a bit, using a more sane - * ioctl numbering, and also trying to be compatible with OSF/1 in - * the process. I'd like to clean it up for the i386 as well, but - * it's so painful recognizing both the new and the old numbers.. - * - * The same applies for for the MIPS ABI; in fact even the macros - * from Linux/Alpha fit almost perfectly. - */ - -#define _IOC_NRBITS 8 -#define _IOC_TYPEBITS 8 #define _IOC_SIZEBITS 13 #define _IOC_DIRBITS 3 -#define _IOC_NRMASK ((1 << _IOC_NRBITS)-1) -#define _IOC_TYPEMASK ((1 << _IOC_TYPEBITS)-1) -#define _IOC_SIZEMASK ((1 << _IOC_SIZEBITS)-1) -#define _IOC_DIRMASK ((1 << _IOC_DIRBITS)-1) - -#define _IOC_NRSHIFT 0 -#define _IOC_TYPESHIFT (_IOC_NRSHIFT+_IOC_NRBITS) -#define _IOC_SIZESHIFT (_IOC_TYPESHIFT+_IOC_TYPEBITS) -#define _IOC_DIRSHIFT (_IOC_SIZESHIFT+_IOC_SIZEBITS) - /* * Direction bits _IOC_NONE could be 0, but OSF/1 gives it a bit. * And this turns out useful to catch old ioctl numbers in header @@ -46,53 +22,6 @@ #define _IOC_READ 2U #define _IOC_WRITE 4U -/* - * The following are included for compatibility - */ -#define _IOC_VOID 0x20000000 -#define _IOC_OUT 0x40000000 -#define _IOC_IN 0x80000000 -#define _IOC_INOUT (IOC_IN|IOC_OUT) - -#define _IOC(dir, type, nr, size) \ - (((dir) << _IOC_DIRSHIFT) | \ - ((type) << _IOC_TYPESHIFT) | \ - ((nr) << _IOC_NRSHIFT) | \ - ((size) << _IOC_SIZESHIFT)) - -#ifdef __KERNEL__ -/* provoke compile error for invalid uses of size argument */ -extern unsigned int __invalid_size_argument_for_IOC; -#define _IOC_TYPECHECK(t) \ - ((sizeof(t) == sizeof(t[1]) && \ - sizeof(t) < (1 << _IOC_SIZEBITS)) ? \ - sizeof(t) : __invalid_size_argument_for_IOC) -#else -#define _IOC_TYPECHECK(t) (sizeof(t)) -#endif - -/* used to create numbers */ -#define _IO(type, nr) _IOC(_IOC_NONE, (type), (nr), 0) -#define _IOR(type, nr, size) _IOC(_IOC_READ, (type), (nr), (_IOC_TYPECHECK(size))) -#define _IOW(type, nr, size) _IOC(_IOC_WRITE, (type), (nr), (_IOC_TYPECHECK(size))) -#define _IOWR(type, nr, size) _IOC(_IOC_READ|_IOC_WRITE, (type), (nr), (_IOC_TYPECHECK(size))) -#define _IOR_BAD(type, nr, size) _IOC(_IOC_READ, (type), (nr), sizeof(size)) -#define _IOW_BAD(type, nr, size) _IOC(_IOC_WRITE, (type), (nr), sizeof(size)) -#define _IOWR_BAD(type, nr, size) _IOC(_IOC_READ|_IOC_WRITE, (type), (nr), sizeof(size)) - - -/* used to decode them.. */ -#define _IOC_DIR(nr) (((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK) -#define _IOC_TYPE(nr) (((nr) >> _IOC_TYPESHIFT) & _IOC_TYPEMASK) -#define _IOC_NR(nr) (((nr) >> _IOC_NRSHIFT) & _IOC_NRMASK) -#define _IOC_SIZE(nr) (((nr) >> _IOC_SIZESHIFT) & _IOC_SIZEMASK) - -/* ...and for the drivers/sound files... */ - -#define IOC_IN (_IOC_WRITE << _IOC_DIRSHIFT) -#define IOC_OUT (_IOC_READ << _IOC_DIRSHIFT) -#define IOC_INOUT ((_IOC_WRITE|_IOC_READ) << _IOC_DIRSHIFT) -#define IOCSIZE_MASK (_IOC_SIZEMASK << _IOC_SIZESHIFT) -#define IOCSIZE_SHIFT (_IOC_SIZESHIFT) +#include <asm-generic/ioctl.h> -#endif /* _ASM_IOCTL_H */ +#endif /* __ASM_IOCTL_H */ -- cgit v1.1 From f203b7cacb96e4bb44b6995c03152cbedfb1857f Mon Sep 17 00:00:00 2001 From: Matthieu Castet <castet.matthieu@free.fr> Date: Sun, 24 May 2009 19:48:51 +0200 Subject: MIPS: BCM47xx: Fix gpio_direction_output gpio_direction_output should also set an output value according to the API. Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> Acked-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/include/asm/mach-bcm47xx/gpio.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/mips/include/asm/mach-bcm47xx/gpio.h b/arch/mips/include/asm/mach-bcm47xx/gpio.h index 1784fde..9850414 100644 --- a/arch/mips/include/asm/mach-bcm47xx/gpio.h +++ b/arch/mips/include/asm/mach-bcm47xx/gpio.h @@ -37,6 +37,9 @@ static inline int gpio_direction_input(unsigned gpio) static inline int gpio_direction_output(unsigned gpio, int value) { + /* first set the gpio out value */ + ssb_gpio_out(&ssb_bcm47xx, 1 << gpio, value ? 1 << gpio : 0); + /* then set the gpio mode */ ssb_gpio_outen(&ssb_bcm47xx, 1 << gpio, 1 << gpio); return 0; } -- cgit v1.1 From eeb09e6545bf68222798ccf3f355560a9e406435 Mon Sep 17 00:00:00 2001 From: Manuel Lauss <manuel.lauss@googlemail.com> Date: Sat, 6 Jun 2009 14:09:54 +0200 Subject: MIPS: Alchemy: Remove unused au1000_gpio.h header Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/include/asm/mach-au1x00/au1000_gpio.h | 56 ------------------------- 1 file changed, 56 deletions(-) delete mode 100644 arch/mips/include/asm/mach-au1x00/au1000_gpio.h (limited to 'arch') diff --git a/arch/mips/include/asm/mach-au1x00/au1000_gpio.h b/arch/mips/include/asm/mach-au1x00/au1000_gpio.h deleted file mode 100644 index d8c96fd..0000000 --- a/arch/mips/include/asm/mach-au1x00/au1000_gpio.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * FILE NAME au1000_gpio.h - * - * BRIEF MODULE DESCRIPTION - * API to Alchemy Au1xx0 GPIO device. - * - * Author: MontaVista Software, Inc. <source@mvista.com> - * Steve Longerbeam - * - * Copyright 2001, 2008 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __AU1000_GPIO_H -#define __AU1000_GPIO_H - -#include <linux/ioctl.h> - -#define AU1000GPIO_IOC_MAGIC 'A' - -#define AU1000GPIO_IN _IOR(AU1000GPIO_IOC_MAGIC, 0, int) -#define AU1000GPIO_SET _IOW(AU1000GPIO_IOC_MAGIC, 1, int) -#define AU1000GPIO_CLEAR _IOW(AU1000GPIO_IOC_MAGIC, 2, int) -#define AU1000GPIO_OUT _IOW(AU1000GPIO_IOC_MAGIC, 3, int) -#define AU1000GPIO_TRISTATE _IOW(AU1000GPIO_IOC_MAGIC, 4, int) -#define AU1000GPIO_AVAIL_MASK _IOR(AU1000GPIO_IOC_MAGIC, 5, int) - -#ifdef __KERNEL__ -extern u32 get_au1000_avail_gpio_mask(void); -extern int au1000gpio_tristate(u32 data); -extern int au1000gpio_in(u32 *data); -extern int au1000gpio_set(u32 data); -extern int au1000gpio_clear(u32 data); -extern int au1000gpio_out(u32 data); -#endif - -#endif -- cgit v1.1 From 51e02b02e650183ff1277bcbad6a01d6ea0e9edb Mon Sep 17 00:00:00 2001 From: Manuel Lauss <manuel.lauss@googlemail.com> Date: Sat, 6 Jun 2009 14:09:55 +0200 Subject: MIPS: Alchemy: Rewrite GPIO support. The current in-kernel Alchemy GPIO support is far too inflexible for all my use cases. To address this, the following changes are made: * create generic functions which deal with manipulating the on-chip GPIO1/2 blocks. Such functions are universally useful. * Macros for GPIO2 shared interrupt management and block control. * support for both built-in CONFIG_GPIOLIB and fast, inlined GPIO macros. If CONFIG_GPIOLIB is not enabled, provide linux gpio framework compatibility by directly inlining the GPIO1/2 functions. GPIO access is limited to on-chip ones and they can be accessed as documented in the datasheets (GPIO0-31 and 200-215). If CONFIG_GPIOLIB is selected, two (2) gpio_chip-s, one for GPIO1 and one for GPIO2, are registered. GPIOs can still be accessed by using the numberspace established in the databooks. However this is not yet flexible enough for my uses: My Alchemy systems have a documented "external" gpio interface (fixed, different numberspace) and can support a variety of baseboards, some of which are equipped with I2C gpio expanders. I want to be able to provide the default 16 GPIOs of the CPU board numbered as 0..15 and also support gpio expanders, if present, starting as gpio16. To achieve this, a new Kconfig symbol for Alchemy is introduced, CONFIG_ALCHEMY_GPIO_INDIRECT, which boards can enable to signal that they don't want the Alchemy numberspace exposed to the outside world, but instead want to provide their own. Boards are now respon- sible for providing the linux gpio interface glue code (either in a custom gpio.h header (in board include directory) or with gpio_chips). To make the board-specific inlined gpio functions work, the MIPS Makefile must be changed so that the mach-au1x00/gpio.h header is included _after_ the board headers, by moving the inclusion of the mach-au1x00/ to the end of the header list. See arch/mips/include/asm/mach-au1x00/gpio.h for more info. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/Makefile | 5 +- arch/mips/alchemy/Kconfig | 19 +- arch/mips/alchemy/common/Makefile | 9 +- arch/mips/alchemy/common/gpio.c | 201 -------- arch/mips/alchemy/common/gpiolib-au1000.c | 130 +++++ arch/mips/include/asm/mach-au1x00/gpio-au1000.h | 604 ++++++++++++++++++++++++ arch/mips/include/asm/mach-au1x00/gpio.h | 35 +- 7 files changed, 770 insertions(+), 233 deletions(-) delete mode 100644 arch/mips/alchemy/common/gpio.c create mode 100644 arch/mips/alchemy/common/gpiolib-au1000.c create mode 100644 arch/mips/include/asm/mach-au1x00/gpio-au1000.h (limited to 'arch') diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 52a3509..e5ccc34 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -183,7 +183,6 @@ load-$(CONFIG_MACH_JAZZ) += 0xffffffff80080000 # Common Alchemy Au1x00 stuff # core-$(CONFIG_SOC_AU1X00) += arch/mips/alchemy/common/ -cflags-$(CONFIG_SOC_AU1X00) += -I$(srctree)/arch/mips/include/asm/mach-au1x00 # # AMD Alchemy Pb1000 eval board @@ -281,6 +280,10 @@ load-$(CONFIG_MIPS_MTX1) += 0xffffffff80100000 libs-$(CONFIG_MIPS_XXS1500) += arch/mips/alchemy/xxs1500/ load-$(CONFIG_MIPS_XXS1500) += 0xffffffff80100000 +# must be last for Alchemy systems for GPIO to work properly +cflags-$(CONFIG_SOC_AU1X00) += -I$(srctree)/arch/mips/include/asm/mach-au1x00 + + # # Cobalt Server # diff --git a/arch/mips/alchemy/Kconfig b/arch/mips/alchemy/Kconfig index 8128aeb..00b498e 100644 --- a/arch/mips/alchemy/Kconfig +++ b/arch/mips/alchemy/Kconfig @@ -1,3 +1,14 @@ +# au1000-style gpio +config ALCHEMY_GPIO_AU1000 + bool + +# select this in your board config if you don't want to use the gpio +# namespace as documented in the manuals. In this case however you need +# to create the necessary gpio_* functions in your board code/headers! +# see arch/mips/include/asm/mach-au1x00/gpio.h for more information. +config ALCHEMY_GPIO_INDIRECT + def_bool n + choice prompt "Machine type" depends on MACH_ALCHEMY @@ -108,22 +119,27 @@ endchoice config SOC_AU1000 bool select SOC_AU1X00 + select ALCHEMY_GPIO_AU1000 config SOC_AU1100 bool select SOC_AU1X00 + select ALCHEMY_GPIO_AU1000 config SOC_AU1500 bool select SOC_AU1X00 + select ALCHEMY_GPIO_AU1000 config SOC_AU1550 bool select SOC_AU1X00 + select ALCHEMY_GPIO_AU1000 config SOC_AU1200 bool select SOC_AU1X00 + select ALCHEMY_GPIO_AU1000 config SOC_AU1X00 bool @@ -134,4 +150,5 @@ config SOC_AU1X00 select SYS_HAS_CPU_MIPS32_R1 select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_APM_EMULATION - select ARCH_REQUIRE_GPIOLIB + select GENERIC_GPIO + select ARCH_WANT_OPTIONAL_GPIOLIB diff --git a/arch/mips/alchemy/common/Makefile b/arch/mips/alchemy/common/Makefile index d50d476..b67fb51 100644 --- a/arch/mips/alchemy/common/Makefile +++ b/arch/mips/alchemy/common/Makefile @@ -7,7 +7,14 @@ obj-y += prom.o irq.o puts.o time.o reset.o \ clocks.o platform.o power.o setup.o \ - sleeper.o dma.o dbdma.o gpio.o + sleeper.o dma.o dbdma.o + +# optional gpiolib support +ifeq ($(CONFIG_ALCHEMY_GPIO_INDIRECT),) + ifeq ($(CONFIG_GPIOLIB),y) + obj-$(CONFIG_ALCHEMY_GPIO_AU1000) += gpiolib-au1000.o + endif +endif obj-$(CONFIG_PCI) += pci.o diff --git a/arch/mips/alchemy/common/gpio.c b/arch/mips/alchemy/common/gpio.c deleted file mode 100644 index 91a9c44..0000000 --- a/arch/mips/alchemy/common/gpio.c +++ /dev/null @@ -1,201 +0,0 @@ -/* - * Copyright (C) 2007-2009, OpenWrt.org, Florian Fainelli <florian@openwrt.org> - * Architecture specific GPIO support - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Notes : - * au1000 SoC have only one GPIO line : GPIO1 - * others have a second one : GPIO2 - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/types.h> -#include <linux/platform_device.h> -#include <linux/gpio.h> - -#include <asm/mach-au1x00/au1000.h> -#include <asm/gpio.h> - -struct au1000_gpio_chip { - struct gpio_chip chip; - void __iomem *regbase; -}; - -#if !defined(CONFIG_SOC_AU1000) -static int au1000_gpio2_get(struct gpio_chip *chip, unsigned offset) -{ - u32 mask = 1 << offset; - struct au1000_gpio_chip *gpch; - - gpch = container_of(chip, struct au1000_gpio_chip, chip); - return readl(gpch->regbase + AU1000_GPIO2_ST) & mask; -} - -static void au1000_gpio2_set(struct gpio_chip *chip, - unsigned offset, int value) -{ - u32 mask = ((GPIO2_OUT_EN_MASK << offset) | (!!value << offset)); - struct au1000_gpio_chip *gpch; - unsigned long flags; - - gpch = container_of(chip, struct au1000_gpio_chip, chip); - - local_irq_save(flags); - writel(mask, gpch->regbase + AU1000_GPIO2_OUT); - local_irq_restore(flags); -} - -static int au1000_gpio2_direction_input(struct gpio_chip *chip, unsigned offset) -{ - u32 mask = 1 << offset; - u32 tmp; - struct au1000_gpio_chip *gpch; - unsigned long flags; - - gpch = container_of(chip, struct au1000_gpio_chip, chip); - - local_irq_save(flags); - tmp = readl(gpch->regbase + AU1000_GPIO2_DIR); - tmp &= ~mask; - writel(tmp, gpch->regbase + AU1000_GPIO2_DIR); - local_irq_restore(flags); - - return 0; -} - -static int au1000_gpio2_direction_output(struct gpio_chip *chip, - unsigned offset, int value) -{ - u32 mask = 1 << offset; - u32 out_mask = ((GPIO2_OUT_EN_MASK << offset) | (!!value << offset)); - u32 tmp; - struct au1000_gpio_chip *gpch; - unsigned long flags; - - gpch = container_of(chip, struct au1000_gpio_chip, chip); - - local_irq_save(flags); - tmp = readl(gpch->regbase + AU1000_GPIO2_DIR); - tmp |= mask; - writel(tmp, gpch->regbase + AU1000_GPIO2_DIR); - writel(out_mask, gpch->regbase + AU1000_GPIO2_OUT); - local_irq_restore(flags); - - return 0; -} -#endif /* !defined(CONFIG_SOC_AU1000) */ - -static int au1000_gpio1_get(struct gpio_chip *chip, unsigned offset) -{ - u32 mask = 1 << offset; - struct au1000_gpio_chip *gpch; - - gpch = container_of(chip, struct au1000_gpio_chip, chip); - return readl(gpch->regbase + AU1000_GPIO1_ST) & mask; -} - -static void au1000_gpio1_set(struct gpio_chip *chip, - unsigned offset, int value) -{ - u32 mask = 1 << offset; - u32 reg_offset; - struct au1000_gpio_chip *gpch; - unsigned long flags; - - gpch = container_of(chip, struct au1000_gpio_chip, chip); - - if (value) - reg_offset = AU1000_GPIO1_OUT; - else - reg_offset = AU1000_GPIO1_CLR; - - local_irq_save(flags); - writel(mask, gpch->regbase + reg_offset); - local_irq_restore(flags); -} - -static int au1000_gpio1_direction_input(struct gpio_chip *chip, unsigned offset) -{ - u32 mask = 1 << offset; - struct au1000_gpio_chip *gpch; - - gpch = container_of(chip, struct au1000_gpio_chip, chip); - writel(mask, gpch->regbase + AU1000_GPIO1_ST); - - return 0; -} - -static int au1000_gpio1_direction_output(struct gpio_chip *chip, - unsigned offset, int value) -{ - u32 mask = 1 << offset; - struct au1000_gpio_chip *gpch; - - gpch = container_of(chip, struct au1000_gpio_chip, chip); - - writel(mask, gpch->regbase + AU1000_GPIO1_TRI_OUT); - au1000_gpio1_set(chip, offset, value); - - return 0; -} - -struct au1000_gpio_chip au1000_gpio_chip[] = { - [0] = { - .regbase = (void __iomem *)SYS_BASE, - .chip = { - .label = "au1000-gpio1", - .direction_input = au1000_gpio1_direction_input, - .direction_output = au1000_gpio1_direction_output, - .get = au1000_gpio1_get, - .set = au1000_gpio1_set, - .base = 0, - .ngpio = 32, - }, - }, -#if !defined(CONFIG_SOC_AU1000) - [1] = { - .regbase = (void __iomem *)GPIO2_BASE, - .chip = { - .label = "au1000-gpio2", - .direction_input = au1000_gpio2_direction_input, - .direction_output = au1000_gpio2_direction_output, - .get = au1000_gpio2_get, - .set = au1000_gpio2_set, - .base = AU1XXX_GPIO_BASE, - .ngpio = 32, - }, - }, -#endif -}; - -static int __init au1000_gpio_init(void) -{ - gpiochip_add(&au1000_gpio_chip[0].chip); -#if !defined(CONFIG_SOC_AU1000) - gpiochip_add(&au1000_gpio_chip[1].chip); -#endif - - return 0; -} -arch_initcall(au1000_gpio_init); - diff --git a/arch/mips/alchemy/common/gpiolib-au1000.c b/arch/mips/alchemy/common/gpiolib-au1000.c new file mode 100644 index 0000000..1bfa91f --- /dev/null +++ b/arch/mips/alchemy/common/gpiolib-au1000.c @@ -0,0 +1,130 @@ +/* + * Copyright (C) 2007-2009, OpenWrt.org, Florian Fainelli <florian@openwrt.org> + * GPIOLIB support for Au1000, Au1500, Au1100, Au1550 and Au12x0. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Notes : + * au1000 SoC have only one GPIO block : GPIO1 + * Au1100, Au15x0, Au12x0 have a second one : GPIO2 + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> + +#include <asm/mach-au1x00/au1000.h> +#include <asm/mach-au1x00/gpio.h> + +#if !defined(CONFIG_SOC_AU1000) +static int gpio2_get(struct gpio_chip *chip, unsigned offset) +{ + return alchemy_gpio2_get_value(offset + ALCHEMY_GPIO2_BASE); +} + +static void gpio2_set(struct gpio_chip *chip, unsigned offset, int value) +{ + alchemy_gpio2_set_value(offset + ALCHEMY_GPIO2_BASE, value); +} + +static int gpio2_direction_input(struct gpio_chip *chip, unsigned offset) +{ + return alchemy_gpio2_direction_input(offset + ALCHEMY_GPIO2_BASE); +} + +static int gpio2_direction_output(struct gpio_chip *chip, unsigned offset, + int value) +{ + return alchemy_gpio2_direction_output(offset + ALCHEMY_GPIO2_BASE, + value); +} + +static int gpio2_to_irq(struct gpio_chip *chip, unsigned offset) +{ + return alchemy_gpio2_to_irq(offset + ALCHEMY_GPIO2_BASE); +} +#endif /* !defined(CONFIG_SOC_AU1000) */ + +static int gpio1_get(struct gpio_chip *chip, unsigned offset) +{ + return alchemy_gpio1_get_value(offset + ALCHEMY_GPIO1_BASE); +} + +static void gpio1_set(struct gpio_chip *chip, + unsigned offset, int value) +{ + alchemy_gpio1_set_value(offset + ALCHEMY_GPIO1_BASE, value); +} + +static int gpio1_direction_input(struct gpio_chip *chip, unsigned offset) +{ + return alchemy_gpio1_direction_input(offset + ALCHEMY_GPIO1_BASE); +} + +static int gpio1_direction_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + return alchemy_gpio1_direction_output(offset + ALCHEMY_GPIO1_BASE, + value); +} + +static int gpio1_to_irq(struct gpio_chip *chip, unsigned offset) +{ + return alchemy_gpio1_to_irq(offset + ALCHEMY_GPIO1_BASE); +} + +struct gpio_chip alchemy_gpio_chip[] = { + [0] = { + .label = "alchemy-gpio1", + .direction_input = gpio1_direction_input, + .direction_output = gpio1_direction_output, + .get = gpio1_get, + .set = gpio1_set, + .to_irq = gpio1_to_irq, + .base = ALCHEMY_GPIO1_BASE, + .ngpio = ALCHEMY_GPIO1_NUM, + }, +#if !defined(CONFIG_SOC_AU1000) + [1] = { + .label = "alchemy-gpio2", + .direction_input = gpio2_direction_input, + .direction_output = gpio2_direction_output, + .get = gpio2_get, + .set = gpio2_set, + .to_irq = gpio2_to_irq, + .base = ALCHEMY_GPIO2_BASE, + .ngpio = ALCHEMY_GPIO2_NUM, + }, +#endif +}; + +static int __init alchemy_gpiolib_init(void) +{ + gpiochip_add(&alchemy_gpio_chip[0]); +#if !defined(CONFIG_SOC_AU1000) + gpiochip_add(&alchemy_gpio_chip[1]); +#endif + + return 0; +} +arch_initcall(alchemy_gpiolib_init); diff --git a/arch/mips/include/asm/mach-au1x00/gpio-au1000.h b/arch/mips/include/asm/mach-au1x00/gpio-au1000.h new file mode 100644 index 0000000..127d4ed --- /dev/null +++ b/arch/mips/include/asm/mach-au1x00/gpio-au1000.h @@ -0,0 +1,604 @@ +/* + * GPIO functions for Au1000, Au1500, Au1100, Au1550, Au1200 + * + * Copyright (c) 2009 Manuel Lauss. + * + * Licensed under the terms outlined in the file COPYING. + */ + +#ifndef _ALCHEMY_GPIO_AU1000_H_ +#define _ALCHEMY_GPIO_AU1000_H_ + +#include <asm/mach-au1x00/au1000.h> + +/* The default GPIO numberspace as documented in the Alchemy manuals. + * GPIO0-31 from GPIO1 block, GPIO200-215 from GPIO2 block. + */ +#define ALCHEMY_GPIO1_BASE 0 +#define ALCHEMY_GPIO2_BASE 200 + +#define ALCHEMY_GPIO1_NUM 32 +#define ALCHEMY_GPIO2_NUM 16 +#define ALCHEMY_GPIO1_MAX (ALCHEMY_GPIO1_BASE + ALCHEMY_GPIO1_NUM - 1) +#define ALCHEMY_GPIO2_MAX (ALCHEMY_GPIO2_BASE + ALCHEMY_GPIO2_NUM - 1) + +#define MAKE_IRQ(intc, off) (AU1000_INTC##intc##_INT_BASE + (off)) + + +static inline int au1000_gpio1_to_irq(int gpio) +{ + return MAKE_IRQ(1, gpio - ALCHEMY_GPIO1_BASE); +} + +static inline int au1000_gpio2_to_irq(int gpio) +{ + return -ENXIO; +} + +#ifdef CONFIG_SOC_AU1000 +static inline int au1000_irq_to_gpio(int irq) +{ + if ((irq >= AU1000_GPIO_0) && (irq <= AU1000_GPIO_31)) + return ALCHEMY_GPIO1_BASE + (irq - AU1000_GPIO_0) + 0; + + return -ENXIO; +} +#endif + +static inline int au1500_gpio1_to_irq(int gpio) +{ + gpio -= ALCHEMY_GPIO1_BASE; + + switch (gpio) { + case 0 ... 15: + case 20: + case 23 ... 28: return MAKE_IRQ(1, gpio); + } + + return -ENXIO; +} + +static inline int au1500_gpio2_to_irq(int gpio) +{ + gpio -= ALCHEMY_GPIO2_BASE; + + switch (gpio) { + case 0 ... 3: return MAKE_IRQ(1, 16 + gpio - 0); + case 4 ... 5: return MAKE_IRQ(1, 21 + gpio - 4); + case 6 ... 7: return MAKE_IRQ(1, 29 + gpio - 6); + } + + return -ENXIO; +} + +#ifdef CONFIG_SOC_AU1500 +static inline int au1500_irq_to_gpio(int irq) +{ + switch (irq) { + case AU1000_GPIO_0 ... AU1000_GPIO_15: + case AU1500_GPIO_20: + case AU1500_GPIO_23 ... AU1500_GPIO_28: + return ALCHEMY_GPIO1_BASE + (irq - AU1000_GPIO_0) + 0; + case AU1500_GPIO_200 ... AU1500_GPIO_203: + return ALCHEMY_GPIO2_BASE + (irq - AU1500_GPIO_200) + 0; + case AU1500_GPIO_204 ... AU1500_GPIO_205: + return ALCHEMY_GPIO2_BASE + (irq - AU1500_GPIO_204) + 4; + case AU1500_GPIO_206 ... AU1500_GPIO_207: + return ALCHEMY_GPIO2_BASE + (irq - AU1500_GPIO_206) + 6; + case AU1500_GPIO_208_215: + return ALCHEMY_GPIO2_BASE + 8; + } + + return -ENXIO; +} +#endif + +static inline int au1100_gpio1_to_irq(int gpio) +{ + return MAKE_IRQ(1, gpio - ALCHEMY_GPIO1_BASE); +} + +static inline int au1100_gpio2_to_irq(int gpio) +{ + gpio -= ALCHEMY_GPIO2_BASE; + + if ((gpio >= 8) && (gpio <= 15)) + return MAKE_IRQ(0, 29); /* shared GPIO208_215 */ +} + +#ifdef CONFIG_SOC_AU1100 +static inline int au1100_irq_to_gpio(int irq) +{ + switch (irq) { + case AU1000_GPIO_0 ... AU1000_GPIO_31: + return ALCHEMY_GPIO1_BASE + (irq - AU1000_GPIO_0) + 0; + case AU1100_GPIO_208_215: + return ALCHEMY_GPIO2_BASE + 8; + } + + return -ENXIO; +} +#endif + +static inline int au1550_gpio1_to_irq(int gpio) +{ + gpio -= ALCHEMY_GPIO1_BASE; + + switch (gpio) { + case 0 ... 15: + case 20 ... 28: return MAKE_IRQ(1, gpio); + case 16 ... 17: return MAKE_IRQ(1, 18 + gpio - 16); + } + + return -ENXIO; +} + +static inline int au1550_gpio2_to_irq(int gpio) +{ + gpio -= ALCHEMY_GPIO2_BASE; + + switch (gpio) { + case 0: return MAKE_IRQ(1, 16); + case 1 ... 5: return MAKE_IRQ(1, 17); /* shared GPIO201_205 */ + case 6 ... 7: return MAKE_IRQ(1, 29 + gpio - 6); + case 8 ... 15: return MAKE_IRQ(1, 31); /* shared GPIO208_215 */ + } + + return -ENXIO; +} + +#ifdef CONFIG_SOC_AU1550 +static inline int au1550_irq_to_gpio(int irq) +{ + switch (irq) { + case AU1000_GPIO_0 ... AU1000_GPIO_15: + return ALCHEMY_GPIO1_BASE + (irq - AU1000_GPIO_0) + 0; + case AU1550_GPIO_200: + case AU1500_GPIO_201_205: + return ALCHEMY_GPIO2_BASE + (irq - AU1550_GPIO_200) + 0; + case AU1500_GPIO_16 ... AU1500_GPIO_28: + return ALCHEMY_GPIO1_BASE + (irq - AU1500_GPIO_16) + 16; + case AU1500_GPIO_206 ... AU1500_GPIO_208_218: + return ALCHEMY_GPIO2_BASE + (irq - AU1500_GPIO_206) + 6; + } + + return -ENXIO; +} +#endif + +static inline int au1200_gpio1_to_irq(int gpio) +{ + return MAKE_IRQ(1, gpio - ALCHEMY_GPIO1_BASE); +} + +static inline int au1200_gpio2_to_irq(int gpio) +{ + gpio -= ALCHEMY_GPIO2_BASE; + + switch (gpio) { + case 0 ... 2: return MAKE_IRQ(0, 5 + gpio - 0); + case 3: return MAKE_IRQ(0, 22); + case 4 ... 7: return MAKE_IRQ(0, 24 + gpio - 4); + case 8 ... 15: return MAKE_IRQ(0, 28); /* shared GPIO208_215 */ + } + + return -ENXIO; +} + +#ifdef CONFIG_SOC_AU1200 +static inline int au1200_irq_to_gpio(int irq) +{ + switch (irq) { + case AU1000_GPIO_0 ... AU1000_GPIO_31: + return ALCHEMY_GPIO1_BASE + (irq - AU1000_GPIO_0) + 0; + case AU1200_GPIO_200 ... AU1200_GPIO_202: + return ALCHEMY_GPIO2_BASE + (irq - AU1200_GPIO_200) + 0; + case AU1200_GPIO_203: + return ALCHEMY_GPIO2_BASE + 3; + case AU1200_GPIO_204 ... AU1200_GPIO_208_215: + return ALCHEMY_GPIO2_BASE + (irq - AU1200_GPIO_204) + 4; + } + + return -ENXIO; +} +#endif + +/* + * GPIO1 block macros for common linux gpio functions. + */ +static inline void alchemy_gpio1_set_value(int gpio, int v) +{ + unsigned long mask = 1 << (gpio - ALCHEMY_GPIO1_BASE); + unsigned long r = v ? SYS_OUTPUTSET : SYS_OUTPUTCLR; + au_writel(mask, r); + au_sync(); +} + +static inline int alchemy_gpio1_get_value(int gpio) +{ + unsigned long mask = 1 << (gpio - ALCHEMY_GPIO1_BASE); + return au_readl(SYS_PINSTATERD) & mask; +} + +static inline int alchemy_gpio1_direction_input(int gpio) +{ + unsigned long mask = 1 << (gpio - ALCHEMY_GPIO1_BASE); + au_writel(mask, SYS_TRIOUTCLR); + au_sync(); + return 0; +} + +static inline int alchemy_gpio1_direction_output(int gpio, int v) +{ + /* hardware switches to "output" mode when one of the two + * "set_value" registers is accessed. + */ + alchemy_gpio1_set_value(gpio, v); + return 0; +} + +static inline int alchemy_gpio1_is_valid(int gpio) +{ + return ((gpio >= ALCHEMY_GPIO1_BASE) && (gpio <= ALCHEMY_GPIO1_MAX)); +} + +static inline int alchemy_gpio1_to_irq(int gpio) +{ +#if defined(CONFIG_SOC_AU1000) + return au1000_gpio1_to_irq(gpio); +#elif defined(CONFIG_SOC_AU1100) + return au1100_gpio1_to_irq(gpio); +#elif defined(CONFIG_SOC_AU1500) + return au1500_gpio1_to_irq(gpio); +#elif defined(CONFIG_SOC_AU1550) + return au1550_gpio1_to_irq(gpio); +#elif defined(CONFIG_SOC_AU1200) + return au1200_gpio1_to_irq(gpio); +#else + return -ENXIO; +#endif +} + +/* + * GPIO2 block macros for common linux GPIO functions. The 'gpio' + * parameter must be in range of ALCHEMY_GPIO2_BASE..ALCHEMY_GPIO2_MAX. + */ +static inline void __alchemy_gpio2_mod_dir(int gpio, int to_out) +{ + unsigned long mask = 1 << (gpio - ALCHEMY_GPIO2_BASE); + unsigned long d = au_readl(GPIO2_DIR); + if (to_out) + d |= mask; + else + d &= ~mask; + au_writel(d, GPIO2_DIR); + au_sync(); +} + +static inline void alchemy_gpio2_set_value(int gpio, int v) +{ + unsigned long mask; + mask = ((v) ? 0x00010001 : 0x00010000) << (gpio - ALCHEMY_GPIO2_BASE); + au_writel(mask, GPIO2_OUTPUT); + au_sync(); +} + +static inline int alchemy_gpio2_get_value(int gpio) +{ + return au_readl(GPIO2_PINSTATE) & (1 << (gpio - ALCHEMY_GPIO2_BASE)); +} + +static inline int alchemy_gpio2_direction_input(int gpio) +{ + unsigned long flags; + local_irq_save(flags); + __alchemy_gpio2_mod_dir(gpio, 0); + local_irq_restore(flags); + return 0; +} + +static inline int alchemy_gpio2_direction_output(int gpio, int v) +{ + unsigned long flags; + alchemy_gpio2_set_value(gpio, v); + local_irq_save(flags); + __alchemy_gpio2_mod_dir(gpio, 1); + local_irq_restore(flags); + return 0; +} + +static inline int alchemy_gpio2_is_valid(int gpio) +{ + return ((gpio >= ALCHEMY_GPIO2_BASE) && (gpio <= ALCHEMY_GPIO2_MAX)); +} + +static inline int alchemy_gpio2_to_irq(int gpio) +{ +#if defined(CONFIG_SOC_AU1000) + return au1000_gpio2_to_irq(gpio); +#elif defined(CONFIG_SOC_AU1100) + return au1100_gpio2_to_irq(gpio); +#elif defined(CONFIG_SOC_AU1500) + return au1500_gpio2_to_irq(gpio); +#elif defined(CONFIG_SOC_AU1550) + return au1550_gpio2_to_irq(gpio); +#elif defined(CONFIG_SOC_AU1200) + return au1200_gpio2_to_irq(gpio); +#else + return -ENXIO; +#endif +} + +/**********************************************************************/ + +/* On Au1000, Au1500 and Au1100 GPIOs won't work as inputs before + * SYS_PININPUTEN is written to at least once. On Au1550/Au1200 this + * register enables use of GPIOs as wake source. + */ +static inline void alchemy_gpio1_input_enable(void) +{ + au_writel(0, SYS_PININPUTEN); /* the write op is key */ + au_sync(); +} + +/* GPIO2 shared interrupts and control */ + +static inline void __alchemy_gpio2_mod_int(int gpio2, int en) +{ + unsigned long r = au_readl(GPIO2_INTENABLE); + if (en) + r |= 1 << gpio2; + else + r &= ~(1 << gpio2); + au_writel(r, GPIO2_INTENABLE); + au_sync(); +} + +/** + * alchemy_gpio2_enable_int - Enable a GPIO2 pins' shared irq contribution. + * @gpio2: The GPIO2 pin to activate (200...215). + * + * GPIO208-215 have one shared interrupt line to the INTC. They are + * and'ed with a per-pin enable bit and finally or'ed together to form + * a single irq request (useful for active-high sources). + * With this function, a pins' individual contribution to the int request + * can be enabled. As with all other GPIO-based interrupts, the INTC + * must be programmed to accept the GPIO208_215 interrupt as well. + * + * NOTE: Calling this macro is only necessary for GPIO208-215; all other + * GPIO2-based interrupts have their own request to the INTC. Please + * consult your Alchemy databook for more information! + * + * NOTE: On the Au1550, GPIOs 201-205 also have a shared interrupt request + * line to the INTC, GPIO201_205. This function can be used for those + * as well. + * + * NOTE: 'gpio2' parameter must be in range of the GPIO2 numberspace + * (200-215 by default). No sanity checks are made, + */ +static inline void alchemy_gpio2_enable_int(int gpio2) +{ + unsigned long flags; + + gpio2 -= ALCHEMY_GPIO2_BASE; + +#if defined(CONFIG_SOC_AU1100) || defined(CONFIG_SOC_AU1500) + /* Au1100/Au1500 have GPIO208-215 enable bits at 0..7 */ + gpio2 -= 8; +#endif + local_irq_save(flags); + __alchemy_gpio2_mod_int(gpio2, 1); + local_irq_restore(flags); +} + +/** + * alchemy_gpio2_disable_int - Disable a GPIO2 pins' shared irq contribution. + * @gpio2: The GPIO2 pin to activate (200...215). + * + * see function alchemy_gpio2_enable_int() for more information. + */ +static inline void alchemy_gpio2_disable_int(int gpio2) +{ + unsigned long flags; + + gpio2 -= ALCHEMY_GPIO2_BASE; + +#if defined(CONFIG_SOC_AU1100) || defined(CONFIG_SOC_AU1500) + /* Au1100/Au1500 have GPIO208-215 enable bits at 0..7 */ + gpio2 -= 8; +#endif + local_irq_save(flags); + __alchemy_gpio2_mod_int(gpio2, 0); + local_irq_restore(flags); +} + +/** + * alchemy_gpio2_enable - Activate GPIO2 block. + * + * The GPIO2 block must be enabled excplicitly to work. On systems + * where this isn't done by the bootloader, this macro can be used. + */ +static inline void alchemy_gpio2_enable(void) +{ + au_writel(3, GPIO2_ENABLE); /* reset, clock enabled */ + au_sync(); + au_writel(1, GPIO2_ENABLE); /* clock enabled */ + au_sync(); +} + +/** + * alchemy_gpio2_disable - disable GPIO2 block. + * + * Disable and put GPIO2 block in low-power mode. + */ +static inline void alchemy_gpio2_disable(void) +{ + au_writel(2, GPIO2_ENABLE); /* reset, clock disabled */ + au_sync(); +} + +/**********************************************************************/ + +/* wrappers for on-chip gpios; can be used before gpio chips have been + * registered with gpiolib. + */ +static inline int alchemy_gpio_direction_input(int gpio) +{ + return (gpio >= ALCHEMY_GPIO2_BASE) ? + alchemy_gpio2_direction_input(gpio) : + alchemy_gpio1_direction_input(gpio); +} + +static inline int alchemy_gpio_direction_output(int gpio, int v) +{ + return (gpio >= ALCHEMY_GPIO2_BASE) ? + alchemy_gpio2_direction_output(gpio, v) : + alchemy_gpio1_direction_output(gpio, v); +} + +static inline int alchemy_gpio_get_value(int gpio) +{ + return (gpio >= ALCHEMY_GPIO2_BASE) ? + alchemy_gpio2_get_value(gpio) : + alchemy_gpio1_get_value(gpio); +} + +static inline void alchemy_gpio_set_value(int gpio, int v) +{ + if (gpio >= ALCHEMY_GPIO2_BASE) + alchemy_gpio2_set_value(gpio, v); + else + alchemy_gpio1_set_value(gpio, v); +} + +static inline int alchemy_gpio_is_valid(int gpio) +{ + return (gpio >= ALCHEMY_GPIO2_BASE) ? + alchemy_gpio2_is_valid(gpio) : + alchemy_gpio1_is_valid(gpio); +} + +static inline int alchemy_gpio_cansleep(int gpio) +{ + return 0; /* Alchemy never gets tired */ +} + +static inline int alchemy_gpio_to_irq(int gpio) +{ + return (gpio >= ALCHEMY_GPIO2_BASE) ? + alchemy_gpio2_to_irq(gpio) : + alchemy_gpio1_to_irq(gpio); +} + +static inline int alchemy_irq_to_gpio(int irq) +{ +#if defined(CONFIG_SOC_AU1000) + return au1000_irq_to_gpio(irq); +#elif defined(CONFIG_SOC_AU1100) + return au1100_irq_to_gpio(irq); +#elif defined(CONFIG_SOC_AU1500) + return au1500_irq_to_gpio(irq); +#elif defined(CONFIG_SOC_AU1550) + return au1550_irq_to_gpio(irq); +#elif defined(CONFIG_SOC_AU1200) + return au1200_irq_to_gpio(irq); +#else + return -ENXIO; +#endif +} + +/**********************************************************************/ + +/* Linux gpio framework integration. + * + * 4 use cases of Au1000-Au1200 GPIOS: + *(1) GPIOLIB=y, ALCHEMY_GPIO_INDIRECT=y: + * Board must register gpiochips. + *(2) GPIOLIB=y, ALCHEMY_GPIO_INDIRECT=n: + * 2 (1 for Au1000) gpio_chips are registered. + * + *(3) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=y: + * the boards' gpio.h must provide the linux gpio wrapper functions, + * + *(4) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=n: + * inlinable gpio functions are provided which enable access to the + * Au1000 gpios only by using the numbers straight out of the data- + * sheets. + + * Cases 1 and 3 are intended for boards which want to provide their own + * GPIO namespace and -operations (i.e. for example you have 8 GPIOs + * which are in part provided by spare Au1000 GPIO pins and in part by + * an external FPGA but you still want them to be accssible in linux + * as gpio0-7. The board can of course use the alchemy_gpioX_* functions + * as required). + */ + +#ifndef CONFIG_GPIOLIB + + +#ifndef CONFIG_ALCHEMY_GPIO_INDIRECT /* case (4) */ + +static inline int gpio_direction_input(int gpio) +{ + return alchemy_gpio_direction_input(gpio); +} + +static inline int gpio_direction_output(int gpio, int v) +{ + return alchemy_gpio_direction_output(gpio, v); +} + +static inline int gpio_get_value(int gpio) +{ + return alchemy_gpio_get_value(gpio); +} + +static inline void gpio_set_value(int gpio, int v) +{ + alchemy_gpio_set_value(gpio, v); +} + +static inline int gpio_is_valid(int gpio) +{ + return alchemy_gpio_is_valid(gpio); +} + +static inline int gpio_cansleep(int gpio) +{ + return alchemy_gpio_cansleep(gpio); +} + +static inline int gpio_to_irq(int gpio) +{ + return alchemy_gpio_to_irq(gpio); +} + +static inline int irq_to_gpio(int irq) +{ + return alchemy_irq_to_gpio(irq); +} + +#endif /* !CONFIG_ALCHEMY_GPIO_INDIRECT */ + + +#else /* CONFIG GPIOLIB */ + + + /* using gpiolib to provide up to 2 gpio_chips for on-chip gpios */ +#ifndef CONFIG_ALCHEMY_GPIO_INDIRECT /* case (2) */ + +/* get everything through gpiolib */ +#define gpio_to_irq __gpio_to_irq +#define gpio_get_value __gpio_get_value +#define gpio_set_value __gpio_set_value +#define gpio_cansleep __gpio_cansleep +#define irq_to_gpio alchemy_irq_to_gpio + +#include <asm-generic/gpio.h> + +#endif /* !CONFIG_ALCHEMY_GPIO_INDIRECT */ + + +#endif /* !CONFIG_GPIOLIB */ + +#endif /* _ALCHEMY_GPIO_AU1000_H_ */ diff --git a/arch/mips/include/asm/mach-au1x00/gpio.h b/arch/mips/include/asm/mach-au1x00/gpio.h index 34d9b72..f9b7d41 100644 --- a/arch/mips/include/asm/mach-au1x00/gpio.h +++ b/arch/mips/include/asm/mach-au1x00/gpio.h @@ -1,33 +1,10 @@ -#ifndef _AU1XXX_GPIO_H_ -#define _AU1XXX_GPIO_H_ +#ifndef _ALCHEMY_GPIO_H_ +#define _ALCHEMY_GPIO_H_ -#include <linux/types.h> +#if defined(CONFIG_ALCHEMY_GPIO_AU1000) -#define AU1XXX_GPIO_BASE 200 +#include <asm/mach-au1x00/gpio-au1000.h> -/* GPIO bank 1 offsets */ -#define AU1000_GPIO1_TRI_OUT 0x0100 -#define AU1000_GPIO1_OUT 0x0108 -#define AU1000_GPIO1_ST 0x0110 -#define AU1000_GPIO1_CLR 0x010C +#endif -/* GPIO bank 2 offsets */ -#define AU1000_GPIO2_DIR 0x00 -#define AU1000_GPIO2_RSVD 0x04 -#define AU1000_GPIO2_OUT 0x08 -#define AU1000_GPIO2_ST 0x0C -#define AU1000_GPIO2_INT 0x10 -#define AU1000_GPIO2_EN 0x14 - -#define GPIO2_OUT_EN_MASK 0x00010000 - -#define gpio_to_irq(gpio) NULL - -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value - -#define gpio_cansleep __gpio_cansleep - -#include <asm-generic/gpio.h> - -#endif /* _AU1XXX_GPIO_H_ */ +#endif /* _ALCHEMY_GPIO_H_ */ -- cgit v1.1 From bb706b28bbd647c2fd7f22d6bf03a18b9552be05 Mon Sep 17 00:00:00 2001 From: Manuel Lauss <manuel.lauss@googlemail.com> Date: Sat, 6 Jun 2009 14:09:56 +0200 Subject: MIPS: Alchemy: MTX-1: Use linux gpio api. Replace a few GPIO register accesses in the board init code with calls to the gpio api. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/alchemy/mtx-1/board_setup.c | 24 +++++++++++++----------- 1 file changed, 13 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/mips/alchemy/mtx-1/board_setup.c b/arch/mips/alchemy/mtx-1/board_setup.c index 8ed1ae1..cc32c69 100644 --- a/arch/mips/alchemy/mtx-1/board_setup.c +++ b/arch/mips/alchemy/mtx-1/board_setup.c @@ -28,6 +28,7 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include <linux/gpio.h> #include <linux/init.h> #include <asm/mach-au1x00/au1000.h> @@ -55,10 +56,11 @@ void __init board_setup(void) } #endif + alchemy_gpio2_enable(); + #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) /* Enable USB power switch */ - au_writel(au_readl(GPIO2_DIR) | 0x10, GPIO2_DIR); - au_writel(0x100000, GPIO2_OUTPUT); + alchemy_gpio_direction_output(204, 0); #endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */ #ifdef CONFIG_PCI @@ -74,14 +76,14 @@ void __init board_setup(void) /* Initialize GPIO */ au_writel(0xFFFFFFFF, SYS_TRIOUTCLR); - au_writel(0x00000001, SYS_OUTPUTCLR); /* set M66EN (PCI 66MHz) to OFF */ - au_writel(0x00000008, SYS_OUTPUTSET); /* set PCI CLKRUN# to OFF */ - au_writel(0x00000002, SYS_OUTPUTSET); /* set EXT_IO3 ON */ - au_writel(0x00000020, SYS_OUTPUTCLR); /* set eth PHY TX_ER to OFF */ + alchemy_gpio_direction_output(0, 0); /* Disable M66EN (PCI 66MHz) */ + alchemy_gpio_direction_output(3, 1); /* Disable PCI CLKRUN# */ + alchemy_gpio_direction_output(1, 1); /* Enable EXT_IO3 */ + alchemy_gpio_direction_output(5, 0); /* Disable eth PHY TX_ER */ /* Enable LED and set it to green */ - au_writel(au_readl(GPIO2_DIR) | 0x1800, GPIO2_DIR); - au_writel(0x18000800, GPIO2_OUTPUT); + alchemy_gpio_direction_output(211, 1); /* green on */ + alchemy_gpio_direction_output(212, 0); /* red off */ board_pci_idsel = mtx1_pci_idsel; @@ -101,10 +103,10 @@ mtx1_pci_idsel(unsigned int devsel, int assert) if (assert && devsel != 0) /* Suppress signal to Cardbus */ - au_writel(0x00000002, SYS_OUTPUTCLR); /* set EXT_IO3 OFF */ + gpio_set_value(1, 0); /* set EXT_IO3 OFF */ else - au_writel(0x00000002, SYS_OUTPUTSET); /* set EXT_IO3 ON */ + gpio_set_value(1, 1); /* set EXT_IO3 ON */ + au_sync_udelay(1); return 1; } - -- cgit v1.1 From b6c9f10517e99d806bebd04555801c787b9a3a23 Mon Sep 17 00:00:00 2001 From: Manuel Lauss <manuel.lauss@googlemail.com> Date: Sat, 6 Jun 2009 14:09:57 +0200 Subject: MIPS: Alchemy: xxs1500: use linux gpio api. Replace a few GPIO register accesses in the board init code with calls to the gpio api. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/alchemy/xxs1500/board_setup.c | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/mips/alchemy/xxs1500/board_setup.c b/arch/mips/alchemy/xxs1500/board_setup.c index a2634fa..4de2d48 100644 --- a/arch/mips/alchemy/xxs1500/board_setup.c +++ b/arch/mips/alchemy/xxs1500/board_setup.c @@ -23,6 +23,7 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include <linux/gpio.h> #include <linux/init.h> #include <linux/delay.h> @@ -50,6 +51,9 @@ void __init board_setup(void) } #endif + alchemy_gpio1_input_enable(); + alchemy_gpio2_enable(); + /* Set multiple use pins (UART3/GPIO) to UART (it's used as UART too) */ pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_UR3; pin_func |= SYS_PF_UR3; @@ -65,20 +69,19 @@ void __init board_setup(void) au_writel(0x01, UART3_ADDR + UART_MCR); /* UART_MCR_DTR is 0x01??? */ #ifdef CONFIG_PCMCIA_XXS1500 - /* Setup PCMCIA signals */ - au_writel(0, SYS_PININPUTEN); - /* GPIO 0, 1, and 4 are inputs */ - au_writel(1 | (1 << 1) | (1 << 4), SYS_TRIOUTCLR); + alchemy_gpio_direction_input(0); + alchemy_gpio_direction_input(1); + alchemy_gpio_direction_input(4); - /* Enable GPIO2 if not already enabled */ - au_writel(1, GPIO2_ENABLE); /* GPIO2 208/9/10/11 are inputs */ - au_writel((1 << 8) | (1 << 9) | (1 << 10) | (1 << 11), GPIO2_DIR); + alchemy_gpio_direction_input(208); + alchemy_gpio_direction_input(209); + alchemy_gpio_direction_input(210); + alchemy_gpio_direction_input(211); /* Turn off power */ - au_writel((au_readl(GPIO2_PINSTATE) & ~(1 << 14)) | (1 << 30), - GPIO2_OUTPUT); + alchemy_gpio_direction_output(214, 0); #endif #ifdef CONFIG_PCI -- cgit v1.1 From ce65cc8fe22a572ea9ec88e203388558b6b863af Mon Sep 17 00:00:00 2001 From: Manuel Lauss <manuel.lauss@googlemail.com> Date: Sat, 6 Jun 2009 14:09:58 +0200 Subject: MIPS: Alchemy: devboards: Convert to gpio calls. Replace a few open-coded GPIO register accesses with gpio calls. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/alchemy/common/reset.c | 5 +++-- arch/mips/alchemy/devboards/db1x00/board_setup.c | 12 ++++++------ arch/mips/alchemy/devboards/pb1000/board_setup.c | 10 +++++++--- arch/mips/alchemy/devboards/pb1100/board_setup.c | 3 ++- arch/mips/alchemy/devboards/pb1500/board_setup.c | 10 ++++++---- arch/mips/alchemy/devboards/pm.c | 3 ++- 6 files changed, 26 insertions(+), 17 deletions(-) (limited to 'arch') diff --git a/arch/mips/alchemy/common/reset.c b/arch/mips/alchemy/common/reset.c index 0191c93..4791011 100644 --- a/arch/mips/alchemy/common/reset.c +++ b/arch/mips/alchemy/common/reset.c @@ -27,8 +27,9 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <asm/cacheflush.h> +#include <linux/gpio.h> +#include <asm/cacheflush.h> #include <asm/mach-au1x00/au1000.h> void au1000_restart(char *command) @@ -161,7 +162,7 @@ void au1000_halt(void) #else printk(KERN_NOTICE "\n** You can safely turn off the power\n"); #ifdef CONFIG_MIPS_MIRAGE - au_writel((1 << 26) | (1 << 10), GPIO2_OUTPUT); + gpio_direction_output(210, 1); #endif #ifdef CONFIG_MIPS_DB1200 au_writew(au_readw(0xB980001C) | (1 << 14), 0xB980001C); diff --git a/arch/mips/alchemy/devboards/db1x00/board_setup.c b/arch/mips/alchemy/devboards/db1x00/board_setup.c index a75ffbf..de30d8e 100644 --- a/arch/mips/alchemy/devboards/db1x00/board_setup.c +++ b/arch/mips/alchemy/devboards/db1x00/board_setup.c @@ -27,6 +27,7 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include <linux/gpio.h> #include <linux/init.h> #include <asm/mach-au1x00/au1000.h> @@ -94,12 +95,12 @@ void __init board_setup(void) #endif bcsr->pcmcia = 0x0000; /* turn off PCMCIA power */ -#ifdef CONFIG_MIPS_MIRAGE /* Enable GPIO[31:0] inputs */ - au_writel(0, SYS_PININPUTEN); + alchemy_gpio1_input_enable(); - /* GPIO[20] is output, tristate the other input primary GPIOs */ - au_writel(~(1 << 20), SYS_TRIOUTCLR); +#ifdef CONFIG_MIPS_MIRAGE + /* GPIO[20] is output */ + alchemy_gpio_direction_output(20, 0); /* Set GPIO[210:208] instead of SSI_0 */ pin_func = au_readl(SYS_PINFUNC) | SYS_PF_S0; @@ -118,8 +119,7 @@ void __init board_setup(void) * Enable speaker amplifier. This should * be part of the audio driver. */ - au_writel(au_readl(GPIO2_DIR) | 0x200, GPIO2_DIR); - au_writel(0x02000200, GPIO2_OUTPUT); + alchemy_gpio_direction_output(209, 1); #endif au_sync(); diff --git a/arch/mips/alchemy/devboards/pb1000/board_setup.c b/arch/mips/alchemy/devboards/pb1000/board_setup.c index aed2fde..cd273545 100644 --- a/arch/mips/alchemy/devboards/pb1000/board_setup.c +++ b/arch/mips/alchemy/devboards/pb1000/board_setup.c @@ -24,6 +24,7 @@ */ #include <linux/delay.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/interrupt.h> #include <asm/mach-au1x00/au1000.h> @@ -130,8 +131,11 @@ void __init board_setup(void) pin_func |= SYS_PF_USB; au_writel(pin_func, SYS_PINFUNC); - au_writel(0x2800, SYS_TRIOUTCLR); - au_writel(0x0030, SYS_OUTPUTCLR); + + alchemy_gpio_direction_input(11); + alchemy_gpio_direction_input(13); + alchemy_gpio_direction_output(4, 0); + alchemy_gpio_direction_output(5, 0); #endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */ /* Make GPIO 15 an input (for interrupt line) */ @@ -140,7 +144,7 @@ void __init board_setup(void) pin_func |= SYS_PF_I2S; au_writel(pin_func, SYS_PINFUNC); - au_writel(0x8000, SYS_TRIOUTCLR); + alchemy_gpio_direction_input(15); static_cfg0 = au_readl(MEM_STCFG0) & ~0xc00; au_writel(static_cfg0, MEM_STCFG0); diff --git a/arch/mips/alchemy/devboards/pb1100/board_setup.c b/arch/mips/alchemy/devboards/pb1100/board_setup.c index 4df57fa..6126308 100644 --- a/arch/mips/alchemy/devboards/pb1100/board_setup.c +++ b/arch/mips/alchemy/devboards/pb1100/board_setup.c @@ -23,6 +23,7 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include <linux/gpio.h> #include <linux/init.h> #include <linux/delay.h> #include <linux/interrupt.h> @@ -88,7 +89,7 @@ void __init board_setup(void) /* Set AUX clock to 12 MHz * 8 = 96 MHz */ au_writel(8, SYS_AUXPLL); - au_writel(0, SYS_PININPUTEN); + alchemy_gpio1_input_enable(); udelay(100); #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) diff --git a/arch/mips/alchemy/devboards/pb1500/board_setup.c b/arch/mips/alchemy/devboards/pb1500/board_setup.c index fed3b09..d7a5656 100644 --- a/arch/mips/alchemy/devboards/pb1500/board_setup.c +++ b/arch/mips/alchemy/devboards/pb1500/board_setup.c @@ -23,8 +23,9 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <linux/init.h> #include <linux/delay.h> +#include <linux/gpio.h> +#include <linux/init.h> #include <linux/interrupt.h> #include <asm/mach-au1x00/au1000.h> @@ -90,11 +91,12 @@ void __init board_setup(void) au_writel(0, SYS_PINSTATERD); udelay(100); -#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) - /* GPIO201 is input for PCMCIA card detect */ /* GPIO203 is input for PCMCIA interrupt request */ - au_writel(au_readl(GPIO2_DIR) & ~((1 << 1) | (1 << 3)), GPIO2_DIR); + alchemy_gpio_direction_input(201); + alchemy_gpio_direction_input(203); + +#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) /* Zero and disable FREQ2 */ sys_freqctrl = au_readl(SYS_FREQCTRL0); diff --git a/arch/mips/alchemy/devboards/pm.c b/arch/mips/alchemy/devboards/pm.c index d5eb9c3..632f986 100644 --- a/arch/mips/alchemy/devboards/pm.c +++ b/arch/mips/alchemy/devboards/pm.c @@ -9,6 +9,7 @@ #include <linux/suspend.h> #include <linux/sysfs.h> #include <asm/mach-au1x00/au1000.h> +#include <asm/mach-au1x00/gpio.h> /* * Generic suspend userspace interface for Alchemy development boards. @@ -26,7 +27,7 @@ static unsigned long db1x_pm_last_wakesrc; static int db1x_pm_enter(suspend_state_t state) { /* enable GPIO based wakeup */ - au_writel(1, SYS_PININPUTEN); + alchemy_gpio1_input_enable(); /* clear and setup wake cause and source */ au_writel(0, SYS_WAKEMSK); -- cgit v1.1 From 6fa044ab8ab609bf95423b2841e20a2f4bb3a86d Mon Sep 17 00:00:00 2001 From: David Daney <ddaney@caviumnetworks.com> Date: Tue, 5 May 2009 17:35:16 -0700 Subject: MIPS: Add named alloc functions to OCTEON boot monitor memory allocator. The various Octeon ethernet drivers use these new functions. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/cavium-octeon/executive/cvmx-bootmem.c | 104 +++++++++++++++++++++++ arch/mips/include/asm/octeon/cvmx-bootmem.h | 85 ++++++++++++++++++ 2 files changed, 189 insertions(+) (limited to 'arch') diff --git a/arch/mips/cavium-octeon/executive/cvmx-bootmem.c b/arch/mips/cavium-octeon/executive/cvmx-bootmem.c index 4f5a08b..25666da 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-bootmem.c +++ b/arch/mips/cavium-octeon/executive/cvmx-bootmem.c @@ -31,6 +31,7 @@ */ #include <linux/kernel.h> +#include <linux/module.h> #include <asm/octeon/cvmx.h> #include <asm/octeon/cvmx-spinlock.h> @@ -97,6 +98,33 @@ void *cvmx_bootmem_alloc(uint64_t size, uint64_t alignment) return cvmx_bootmem_alloc_range(size, alignment, 0, 0); } +void *cvmx_bootmem_alloc_named_range(uint64_t size, uint64_t min_addr, + uint64_t max_addr, uint64_t align, + char *name) +{ + int64_t addr; + + addr = cvmx_bootmem_phy_named_block_alloc(size, min_addr, max_addr, + align, name, 0); + if (addr >= 0) + return cvmx_phys_to_ptr(addr); + else + return NULL; +} + +void *cvmx_bootmem_alloc_named_address(uint64_t size, uint64_t address, + char *name) +{ + return cvmx_bootmem_alloc_named_range(size, address, address + size, + 0, name); +} + +void *cvmx_bootmem_alloc_named(uint64_t size, uint64_t alignment, char *name) +{ + return cvmx_bootmem_alloc_named_range(size, 0, 0, alignment, name); +} +EXPORT_SYMBOL(cvmx_bootmem_alloc_named); + int cvmx_bootmem_free_named(char *name) { return cvmx_bootmem_phy_named_block_free(name, 0); @@ -106,6 +134,7 @@ struct cvmx_bootmem_named_block_desc *cvmx_bootmem_find_named_block(char *name) { return cvmx_bootmem_phy_named_block_find(name, 0); } +EXPORT_SYMBOL(cvmx_bootmem_find_named_block); void cvmx_bootmem_lock(void) { @@ -584,3 +613,78 @@ int cvmx_bootmem_phy_named_block_free(char *name, uint32_t flags) cvmx_bootmem_unlock(); return named_block_ptr != NULL; /* 0 on failure, 1 on success */ } + +int64_t cvmx_bootmem_phy_named_block_alloc(uint64_t size, uint64_t min_addr, + uint64_t max_addr, + uint64_t alignment, + char *name, + uint32_t flags) +{ + int64_t addr_allocated; + struct cvmx_bootmem_named_block_desc *named_block_desc_ptr; + +#ifdef DEBUG + cvmx_dprintf("cvmx_bootmem_phy_named_block_alloc: size: 0x%llx, min: " + "0x%llx, max: 0x%llx, align: 0x%llx, name: %s\n", + (unsigned long long)size, + (unsigned long long)min_addr, + (unsigned long long)max_addr, + (unsigned long long)alignment, + name); +#endif + if (cvmx_bootmem_desc->major_version != 3) { + cvmx_dprintf("ERROR: Incompatible bootmem descriptor version: " + "%d.%d at addr: %p\n", + (int)cvmx_bootmem_desc->major_version, + (int)cvmx_bootmem_desc->minor_version, + cvmx_bootmem_desc); + return -1; + } + + /* + * Take lock here, as name lookup/block alloc/name add need to + * be atomic. + */ + if (!(flags & CVMX_BOOTMEM_FLAG_NO_LOCKING)) + cvmx_spinlock_lock((cvmx_spinlock_t *)&(cvmx_bootmem_desc->lock)); + + /* Get pointer to first available named block descriptor */ + named_block_desc_ptr = + cvmx_bootmem_phy_named_block_find(NULL, + flags | CVMX_BOOTMEM_FLAG_NO_LOCKING); + + /* + * Check to see if name already in use, return error if name + * not available or no more room for blocks. + */ + if (cvmx_bootmem_phy_named_block_find(name, + flags | CVMX_BOOTMEM_FLAG_NO_LOCKING) || !named_block_desc_ptr) { + if (!(flags & CVMX_BOOTMEM_FLAG_NO_LOCKING)) + cvmx_spinlock_unlock((cvmx_spinlock_t *)&(cvmx_bootmem_desc->lock)); + return -1; + } + + + /* + * Round size up to mult of minimum alignment bytes We need + * the actual size allocated to allow for blocks to be + * coallesced when they are freed. The alloc routine does the + * same rounding up on all allocations. + */ + size = __ALIGN_MASK(size, (CVMX_BOOTMEM_ALIGNMENT_SIZE - 1)); + + addr_allocated = cvmx_bootmem_phy_alloc(size, min_addr, max_addr, + alignment, + flags | CVMX_BOOTMEM_FLAG_NO_LOCKING); + if (addr_allocated >= 0) { + named_block_desc_ptr->base_addr = addr_allocated; + named_block_desc_ptr->size = size; + strncpy(named_block_desc_ptr->name, name, + cvmx_bootmem_desc->named_block_name_len); + named_block_desc_ptr->name[cvmx_bootmem_desc->named_block_name_len - 1] = 0; + } + + if (!(flags & CVMX_BOOTMEM_FLAG_NO_LOCKING)) + cvmx_spinlock_unlock((cvmx_spinlock_t *)&(cvmx_bootmem_desc->lock)); + return addr_allocated; +} diff --git a/arch/mips/include/asm/octeon/cvmx-bootmem.h b/arch/mips/include/asm/octeon/cvmx-bootmem.h index 1cbe4b5..8e708bd 100644 --- a/arch/mips/include/asm/octeon/cvmx-bootmem.h +++ b/arch/mips/include/asm/octeon/cvmx-bootmem.h @@ -183,6 +183,64 @@ extern void *cvmx_bootmem_alloc_range(uint64_t size, uint64_t alignment, * Returns 0 on failure, * !0 on success */ + + +/** + * Allocate a block of memory from the free list that was passed + * to the application by the bootloader, and assign it a name in the + * global named block table. (part of the cvmx_bootmem_descriptor_t structure) + * Named blocks can later be freed. + * + * @size: Size in bytes of block to allocate + * @alignment: Alignment required - must be power of 2 + * @name: name of block - must be less than CVMX_BOOTMEM_NAME_LEN bytes + * + * Returns a pointer to block of memory, NULL on error + */ +extern void *cvmx_bootmem_alloc_named(uint64_t size, uint64_t alignment, + char *name); + + + +/** + * Allocate a block of memory from the free list that was passed + * to the application by the bootloader, and assign it a name in the + * global named block table. (part of the cvmx_bootmem_descriptor_t structure) + * Named blocks can later be freed. + * + * @size: Size in bytes of block to allocate + * @address: Physical address to allocate memory at. If this + * memory is not available, the allocation fails. + * @name: name of block - must be less than CVMX_BOOTMEM_NAME_LEN + * bytes + * + * Returns a pointer to block of memory, NULL on error + */ +extern void *cvmx_bootmem_alloc_named_address(uint64_t size, uint64_t address, + char *name); + + + +/** + * Allocate a block of memory from a specific range of the free list + * that was passed to the application by the bootloader, and assign it + * a name in the global named block table. (part of the + * cvmx_bootmem_descriptor_t structure) Named blocks can later be + * freed. If request cannot be satisfied within the address range + * specified, NULL is returned + * + * @size: Size in bytes of block to allocate + * @min_addr: minimum address of range + * @max_addr: maximum address of range + * @align: Alignment of memory to be allocated. (must be a power of 2) + * @name: name of block - must be less than CVMX_BOOTMEM_NAME_LEN bytes + * + * Returns a pointer to block of memory, NULL on error + */ +extern void *cvmx_bootmem_alloc_named_range(uint64_t size, uint64_t min_addr, + uint64_t max_addr, uint64_t align, + char *name); + extern int cvmx_bootmem_free_named(char *name); /** @@ -224,6 +282,33 @@ int64_t cvmx_bootmem_phy_alloc(uint64_t req_size, uint64_t address_min, uint32_t flags); /** + * Allocates a named block of physical memory from the free list, at + * (optional) requested address and alignment. + * + * @param size size of region to allocate. All requests are rounded + * up to be a multiple CVMX_BOOTMEM_ALIGNMENT_SIZE + * bytes size + * @param min_addr Minimum address that block can occupy. + * @param max_addr Specifies the maximum address_min (inclusive) that + * the allocation can use. + * @param alignment Requested alignment of the block. If this + * alignment cannot be met, the allocation fails. + * This must be a power of 2. (Note: Alignment of + * CVMX_BOOTMEM_ALIGNMENT_SIZE bytes is required, and + * internally enforced. Requested alignments of less + * than CVMX_BOOTMEM_ALIGNMENT_SIZE are set to + * CVMX_BOOTMEM_ALIGNMENT_SIZE.) + * @param name name to assign to named block + * @param flags Flags to control options for the allocation. + * + * @return physical address of block allocated, or -1 on failure + */ +int64_t cvmx_bootmem_phy_named_block_alloc(uint64_t size, uint64_t min_addr, + uint64_t max_addr, + uint64_t alignment, + char *name, uint32_t flags); + +/** * Finds a named memory block by name. * Also used for finding an unused entry in the named block table. * -- cgit v1.1 From 3e903bd9b192fe9739bb960191402d3b97ef4f6c Mon Sep 17 00:00:00 2001 From: David Daney <ddaney@caviumnetworks.com> Date: Tue, 5 May 2009 17:35:17 -0700 Subject: MIPS: Export cvmx_sysinfo_get needed by octeon-ethernet driver. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/cavium-octeon/executive/cvmx-sysinfo.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/mips/cavium-octeon/executive/cvmx-sysinfo.c b/arch/mips/cavium-octeon/executive/cvmx-sysinfo.c index 48123707..e583889 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-sysinfo.c +++ b/arch/mips/cavium-octeon/executive/cvmx-sysinfo.c @@ -29,6 +29,7 @@ * This module provides system/board/application information obtained * by the bootloader. */ +#include <linux/module.h> #include <asm/octeon/cvmx.h> #include <asm/octeon/cvmx-spinlock.h> @@ -69,6 +70,7 @@ struct cvmx_sysinfo *cvmx_sysinfo_get(void) { return &(state.sysinfo); } +EXPORT_SYMBOL(cvmx_sysinfo_get); /** * This function is used in non-simple executive environments (such as -- cgit v1.1 From 2b1b62e841867326fa260a581d97941c32abc35b Mon Sep 17 00:00:00 2001 From: David Daney <ddaney@caviumnetworks.com> Date: Tue, 5 May 2009 17:35:18 -0700 Subject: MIPS: Cavium-Octeon: Add more board type constants. The bootloader now uses additional board type constants. The octeon-ethernet driver needs some of the new values. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/include/asm/octeon/cvmx-bootinfo.h | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'arch') diff --git a/arch/mips/include/asm/octeon/cvmx-bootinfo.h b/arch/mips/include/asm/octeon/cvmx-bootinfo.h index 692989a..f3c23a4 100644 --- a/arch/mips/include/asm/octeon/cvmx-bootinfo.h +++ b/arch/mips/include/asm/octeon/cvmx-bootinfo.h @@ -157,6 +157,13 @@ enum cvmx_board_types_enum { CVMX_BOARD_TYPE_NIC_XLE_4G = 21, CVMX_BOARD_TYPE_EBT5600 = 22, CVMX_BOARD_TYPE_EBH5201 = 23, + CVMX_BOARD_TYPE_EBT5200 = 24, + CVMX_BOARD_TYPE_CB5600 = 25, + CVMX_BOARD_TYPE_CB5601 = 26, + CVMX_BOARD_TYPE_CB5200 = 27, + /* Special 'generic' board type, supports many boards */ + CVMX_BOARD_TYPE_GENERIC = 28, + CVMX_BOARD_TYPE_EBH5610 = 29, CVMX_BOARD_TYPE_MAX, /* @@ -228,6 +235,12 @@ static inline const char *cvmx_board_type_to_string(enum ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_NIC_XLE_4G) ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_EBT5600) ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_EBH5201) + ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_EBT5200) + ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CB5600) + ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CB5601) + ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CB5200) + ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_GENERIC) + ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_EBH5610) ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_MAX) /* Customer boards listed here */ -- cgit v1.1 From f1f1f5902be0cec3b5026610f360cd471765c157 Mon Sep 17 00:00:00 2001 From: David Daney <ddaney@caviumnetworks.com> Date: Tue, 5 May 2009 17:35:19 -0700 Subject: MIPS: Cavium-Octeon: Add more chip specific feature tests. The octeon-ethernet driver needs to check for additional chip specific features, we add them to the octeon_has_feature() framework. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/include/asm/octeon/octeon-feature.h | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) (limited to 'arch') diff --git a/arch/mips/include/asm/octeon/octeon-feature.h b/arch/mips/include/asm/octeon/octeon-feature.h index 04fac68..ef24a7b 100644 --- a/arch/mips/include/asm/octeon/octeon-feature.h +++ b/arch/mips/include/asm/octeon/octeon-feature.h @@ -57,6 +57,13 @@ enum octeon_feature { OCTEON_FEATURE_RAID, /* Octeon has a builtin USB */ OCTEON_FEATURE_USB, + /* Octeon IPD can run without using work queue entries */ + OCTEON_FEATURE_NO_WPTR, + /* Octeon has DFA state machines */ + OCTEON_FEATURE_DFA, + /* Octeon MDIO block supports clause 45 transactions for 10 + * Gig support */ + OCTEON_FEATURE_MDIO_CLAUSE_45, }; static inline int cvmx_fuse_read(int fuse); @@ -112,6 +119,26 @@ static inline int octeon_has_feature(enum octeon_feature feature) case OCTEON_FEATURE_USB: return !(OCTEON_IS_MODEL(OCTEON_CN38XX) || OCTEON_IS_MODEL(OCTEON_CN58XX)); + case OCTEON_FEATURE_NO_WPTR: + return (OCTEON_IS_MODEL(OCTEON_CN56XX) + || OCTEON_IS_MODEL(OCTEON_CN52XX)) + && !OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_X) + && !OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_X); + case OCTEON_FEATURE_DFA: + if (!OCTEON_IS_MODEL(OCTEON_CN38XX) + && !OCTEON_IS_MODEL(OCTEON_CN31XX) + && !OCTEON_IS_MODEL(OCTEON_CN58XX)) + return 0; + else if (OCTEON_IS_MODEL(OCTEON_CN3020)) + return 0; + else if (OCTEON_IS_MODEL(OCTEON_CN38XX_PASS1)) + return 1; + else + return !cvmx_fuse_read(120); + case OCTEON_FEATURE_MDIO_CLAUSE_45: + return !(OCTEON_IS_MODEL(OCTEON_CN3XXX) + || OCTEON_IS_MODEL(OCTEON_CN58XX) + || OCTEON_IS_MODEL(OCTEON_CN50XX)); } return 0; } -- cgit v1.1 From 38295fb2a09264671c82d490ce77c17d492378e0 Mon Sep 17 00:00:00 2001 From: David Daney <ddaney@caviumnetworks.com> Date: Tue, 5 May 2009 17:35:20 -0700 Subject: MIPS: Export erratum function needed by octeon-ethernet driver. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/cavium-octeon/executive/cvmx-helper-errata.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-errata.c b/arch/mips/cavium-octeon/executive/cvmx-helper-errata.c index 8fb8205..868659e 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-helper-errata.c +++ b/arch/mips/cavium-octeon/executive/cvmx-helper-errata.c @@ -33,6 +33,8 @@ * these functions directly. * */ +#include <linux/module.h> + #include <asm/octeon/octeon.h> #include <asm/octeon/cvmx-helper-jtag.h> @@ -68,3 +70,4 @@ void __cvmx_helper_errata_qlm_disable_2nd_order_cdr(int qlm) } cvmx_helper_qlm_jtag_update(qlm); } +EXPORT_SYMBOL(__cvmx_helper_errata_qlm_disable_2nd_order_cdr); -- cgit v1.1 From bd1437e49d80fa3369ffbea9e73cde7f6d69e550 Mon Sep 17 00:00:00 2001 From: David Daney <ddaney@caviumnetworks.com> Date: Fri, 8 May 2009 15:10:50 -0700 Subject: MIPS: Remove unused parameters from iPTE_LW. The l parameter to iPTE_LW() is unused. Remove it and from some of its callers as well. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/mm/tlbex.c | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index 2104aa0..62fbd0d 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -825,7 +825,7 @@ u32 handle_tlbs[FASTPATH_SIZE] __cacheline_aligned; u32 handle_tlbm[FASTPATH_SIZE] __cacheline_aligned; static void __cpuinit -iPTE_LW(u32 **p, struct uasm_label **l, unsigned int pte, unsigned int ptr) +iPTE_LW(u32 **p, unsigned int pte, unsigned int ptr) { #ifdef CONFIG_SMP # ifdef CONFIG_64BIT_PHYS_ADDR @@ -905,13 +905,13 @@ iPTE_SW(u32 **p, struct uasm_reloc **r, unsigned int pte, unsigned int ptr, * with it's original value. */ static void __cpuinit -build_pte_present(u32 **p, struct uasm_label **l, struct uasm_reloc **r, +build_pte_present(u32 **p, struct uasm_reloc **r, unsigned int pte, unsigned int ptr, enum label_id lid) { uasm_i_andi(p, pte, pte, _PAGE_PRESENT | _PAGE_READ); uasm_i_xori(p, pte, pte, _PAGE_PRESENT | _PAGE_READ); uasm_il_bnez(p, r, pte, lid); - iPTE_LW(p, l, pte, ptr); + iPTE_LW(p, pte, ptr); } /* Make PTE valid, store result in PTR. */ @@ -929,13 +929,13 @@ build_make_valid(u32 **p, struct uasm_reloc **r, unsigned int pte, * restore PTE with value from PTR when done. */ static void __cpuinit -build_pte_writable(u32 **p, struct uasm_label **l, struct uasm_reloc **r, +build_pte_writable(u32 **p, struct uasm_reloc **r, unsigned int pte, unsigned int ptr, enum label_id lid) { uasm_i_andi(p, pte, pte, _PAGE_PRESENT | _PAGE_WRITE); uasm_i_xori(p, pte, pte, _PAGE_PRESENT | _PAGE_WRITE); uasm_il_bnez(p, r, pte, lid); - iPTE_LW(p, l, pte, ptr); + iPTE_LW(p, pte, ptr); } /* Make PTE writable, update software status bits as well, then store @@ -956,12 +956,12 @@ build_make_write(u32 **p, struct uasm_reloc **r, unsigned int pte, * restore PTE with value from PTR when done. */ static void __cpuinit -build_pte_modifiable(u32 **p, struct uasm_label **l, struct uasm_reloc **r, +build_pte_modifiable(u32 **p, struct uasm_reloc **r, unsigned int pte, unsigned int ptr, enum label_id lid) { uasm_i_andi(p, pte, pte, _PAGE_WRITE); uasm_il_beqz(p, r, pte, lid); - iPTE_LW(p, l, pte, ptr); + iPTE_LW(p, pte, ptr); } /* @@ -1037,7 +1037,7 @@ static void __cpuinit build_r3000_tlb_load_handler(void) memset(relocs, 0, sizeof(relocs)); build_r3000_tlbchange_handler_head(&p, K0, K1); - build_pte_present(&p, &l, &r, K0, K1, label_nopage_tlbl); + build_pte_present(&p, &r, K0, K1, label_nopage_tlbl); uasm_i_nop(&p); /* load delay */ build_make_valid(&p, &r, K0, K1); build_r3000_tlb_reload_write(&p, &l, &r, K0, K1); @@ -1067,7 +1067,7 @@ static void __cpuinit build_r3000_tlb_store_handler(void) memset(relocs, 0, sizeof(relocs)); build_r3000_tlbchange_handler_head(&p, K0, K1); - build_pte_writable(&p, &l, &r, K0, K1, label_nopage_tlbs); + build_pte_writable(&p, &r, K0, K1, label_nopage_tlbs); uasm_i_nop(&p); /* load delay */ build_make_write(&p, &r, K0, K1); build_r3000_tlb_reload_write(&p, &l, &r, K0, K1); @@ -1097,7 +1097,7 @@ static void __cpuinit build_r3000_tlb_modify_handler(void) memset(relocs, 0, sizeof(relocs)); build_r3000_tlbchange_handler_head(&p, K0, K1); - build_pte_modifiable(&p, &l, &r, K0, K1, label_nopage_tlbm); + build_pte_modifiable(&p, &r, K0, K1, label_nopage_tlbm); uasm_i_nop(&p); /* load delay */ build_make_write(&p, &r, K0, K1); build_r3000_pte_reload_tlbwi(&p, K0, K1); @@ -1139,7 +1139,7 @@ build_r4000_tlbchange_handler_head(u32 **p, struct uasm_label **l, #ifdef CONFIG_SMP uasm_l_smp_pgtable_change(l, *p); #endif - iPTE_LW(p, l, pte, ptr); /* get even pte */ + iPTE_LW(p, pte, ptr); /* get even pte */ if (!m4kc_tlbp_war()) build_tlb_probe_entry(p); } @@ -1181,7 +1181,7 @@ static void __cpuinit build_r4000_tlb_load_handler(void) } build_r4000_tlbchange_handler_head(&p, &l, &r, K0, K1); - build_pte_present(&p, &l, &r, K0, K1, label_nopage_tlbl); + build_pte_present(&p, &r, K0, K1, label_nopage_tlbl); if (m4kc_tlbp_war()) build_tlb_probe_entry(&p); build_make_valid(&p, &r, K0, K1); @@ -1212,7 +1212,7 @@ static void __cpuinit build_r4000_tlb_store_handler(void) memset(relocs, 0, sizeof(relocs)); build_r4000_tlbchange_handler_head(&p, &l, &r, K0, K1); - build_pte_writable(&p, &l, &r, K0, K1, label_nopage_tlbs); + build_pte_writable(&p, &r, K0, K1, label_nopage_tlbs); if (m4kc_tlbp_war()) build_tlb_probe_entry(&p); build_make_write(&p, &r, K0, K1); @@ -1243,7 +1243,7 @@ static void __cpuinit build_r4000_tlb_modify_handler(void) memset(relocs, 0, sizeof(relocs)); build_r4000_tlbchange_handler_head(&p, &l, &r, K0, K1); - build_pte_modifiable(&p, &l, &r, K0, K1, label_nopage_tlbm); + build_pte_modifiable(&p, &r, K0, K1, label_nopage_tlbm); if (m4kc_tlbp_war()) build_tlb_probe_entry(&p); /* Present and writable bits set, set accessed and dirty bits. */ -- cgit v1.1 From 50a41ff292fafe1e937102be23464b54fed8b78c Mon Sep 17 00:00:00 2001 From: David Daney <ddaney@caviumnetworks.com> Date: Wed, 27 May 2009 17:47:42 -0700 Subject: MIPS: Add support files for hugetlbfs. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/include/asm/hugetlb.h | 114 ++++++++++++++++++++++++++++++++++++++++ arch/mips/mm/Makefile | 1 + arch/mips/mm/hugetlbpage.c | 101 +++++++++++++++++++++++++++++++++++ 3 files changed, 216 insertions(+) create mode 100644 arch/mips/include/asm/hugetlb.h create mode 100644 arch/mips/mm/hugetlbpage.c (limited to 'arch') diff --git a/arch/mips/include/asm/hugetlb.h b/arch/mips/include/asm/hugetlb.h new file mode 100644 index 0000000..f5e85601 --- /dev/null +++ b/arch/mips/include/asm/hugetlb.h @@ -0,0 +1,114 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008, 2009 Cavium Networks, Inc. + */ + +#ifndef __ASM_HUGETLB_H +#define __ASM_HUGETLB_H + +#include <asm/page.h> + + +static inline int is_hugepage_only_range(struct mm_struct *mm, + unsigned long addr, + unsigned long len) +{ + return 0; +} + +static inline int prepare_hugepage_range(struct file *file, + unsigned long addr, + unsigned long len) +{ + unsigned long task_size = STACK_TOP; + struct hstate *h = hstate_file(file); + + if (len & ~huge_page_mask(h)) + return -EINVAL; + if (addr & ~huge_page_mask(h)) + return -EINVAL; + if (len > task_size) + return -ENOMEM; + if (task_size - len < addr) + return -EINVAL; + return 0; +} + +static inline void hugetlb_prefault_arch_hook(struct mm_struct *mm) +{ +} + +static inline void hugetlb_free_pgd_range(struct mmu_gather *tlb, + unsigned long addr, + unsigned long end, + unsigned long floor, + unsigned long ceiling) +{ + free_pgd_range(tlb, addr, end, floor, ceiling); +} + +static inline void set_huge_pte_at(struct mm_struct *mm, unsigned long addr, + pte_t *ptep, pte_t pte) +{ + set_pte_at(mm, addr, ptep, pte); +} + +static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm, + unsigned long addr, pte_t *ptep) +{ + pte_t clear; + pte_t pte = *ptep; + + pte_val(clear) = (unsigned long)invalid_pte_table; + set_pte_at(mm, addr, ptep, clear); + return pte; +} + +static inline void huge_ptep_clear_flush(struct vm_area_struct *vma, + unsigned long addr, pte_t *ptep) +{ +} + +static inline int huge_pte_none(pte_t pte) +{ + unsigned long val = pte_val(pte) & ~_PAGE_GLOBAL; + return !val || (val == (unsigned long)invalid_pte_table); +} + +static inline pte_t huge_pte_wrprotect(pte_t pte) +{ + return pte_wrprotect(pte); +} + +static inline void huge_ptep_set_wrprotect(struct mm_struct *mm, + unsigned long addr, pte_t *ptep) +{ + ptep_set_wrprotect(mm, addr, ptep); +} + +static inline int huge_ptep_set_access_flags(struct vm_area_struct *vma, + unsigned long addr, + pte_t *ptep, pte_t pte, + int dirty) +{ + return ptep_set_access_flags(vma, addr, ptep, pte, dirty); +} + +static inline pte_t huge_ptep_get(pte_t *ptep) +{ + return *ptep; +} + +static inline int arch_prepare_hugepage(struct page *page) +{ + return 0; +} + +static inline void arch_release_hugepage(struct page *page) +{ +} + +#endif /* __ASM_HUGETLB_H */ diff --git a/arch/mips/mm/Makefile b/arch/mips/mm/Makefile index d7ec955..f0e4355 100644 --- a/arch/mips/mm/Makefile +++ b/arch/mips/mm/Makefile @@ -8,6 +8,7 @@ obj-y += cache.o dma-default.o extable.o fault.o \ obj-$(CONFIG_32BIT) += ioremap.o pgtable-32.o obj-$(CONFIG_64BIT) += pgtable-64.o obj-$(CONFIG_HIGHMEM) += highmem.o +obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o obj-$(CONFIG_CPU_LOONGSON2) += c-r4k.o cex-gen.o tlb-r4k.o obj-$(CONFIG_CPU_MIPS32) += c-r4k.o cex-gen.o tlb-r4k.o diff --git a/arch/mips/mm/hugetlbpage.c b/arch/mips/mm/hugetlbpage.c new file mode 100644 index 0000000..471c09a --- /dev/null +++ b/arch/mips/mm/hugetlbpage.c @@ -0,0 +1,101 @@ +/* + * MIPS Huge TLB Page Support for Kernel. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, Rohit Seth <rohit.seth@intel.com> + * Copyright 2005, Embedded Alley Solutions, Inc. + * Matt Porter <mporter@embeddedalley.com> + * Copyright (C) 2008, 2009 Cavium Networks, Inc. + */ + +#include <linux/init.h> +#include <linux/fs.h> +#include <linux/mm.h> +#include <linux/hugetlb.h> +#include <linux/pagemap.h> +#include <linux/smp_lock.h> +#include <linux/slab.h> +#include <linux/err.h> +#include <linux/sysctl.h> +#include <asm/mman.h> +#include <asm/tlb.h> +#include <asm/tlbflush.h> + +pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr, + unsigned long sz) +{ + pgd_t *pgd; + pud_t *pud; + pte_t *pte = NULL; + + pgd = pgd_offset(mm, addr); + pud = pud_alloc(mm, pgd, addr); + if (pud) + pte = (pte_t *)pmd_alloc(mm, pud, addr); + + return pte; +} + +pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr) +{ + pgd_t *pgd; + pud_t *pud; + pmd_t *pmd = NULL; + + pgd = pgd_offset(mm, addr); + if (pgd_present(*pgd)) { + pud = pud_offset(pgd, addr); + if (pud_present(*pud)) + pmd = pmd_offset(pud, addr); + } + return (pte_t *) pmd; +} + +int huge_pmd_unshare(struct mm_struct *mm, unsigned long *addr, pte_t *ptep) +{ + return 0; +} + +/* + * This function checks for proper alignment of input addr and len parameters. + */ +int is_aligned_hugepage_range(unsigned long addr, unsigned long len) +{ + if (len & ~HPAGE_MASK) + return -EINVAL; + if (addr & ~HPAGE_MASK) + return -EINVAL; + return 0; +} + +struct page * +follow_huge_addr(struct mm_struct *mm, unsigned long address, int write) +{ + return ERR_PTR(-EINVAL); +} + +int pmd_huge(pmd_t pmd) +{ + return (pmd_val(pmd) & _PAGE_HUGE) != 0; +} + +int pud_huge(pud_t pud) +{ + return (pud_val(pud) & _PAGE_HUGE) != 0; +} + +struct page * +follow_huge_pmd(struct mm_struct *mm, unsigned long address, + pmd_t *pmd, int write) +{ + struct page *page; + + page = pte_page(*(pte_t *)pmd); + if (page) + page += ((address & ~HPAGE_MASK) >> PAGE_SHIFT); + return page; +} + -- cgit v1.1 From dd7943920b492d9d8a79080fe05e25ecd7e10bc3 Mon Sep 17 00:00:00 2001 From: David Daney <ddaney@caviumnetworks.com> Date: Wed, 27 May 2009 17:47:43 -0700 Subject: MIPS: Add hugetlbfs page defines. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/include/asm/mipsregs.h | 16 ++++++++++++++++ arch/mips/include/asm/page.h | 5 +++++ arch/mips/include/asm/pgtable-bits.h | 1 + arch/mips/include/asm/pgtable.h | 10 ++++++++++ 4 files changed, 32 insertions(+) (limited to 'arch') diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h index 32ef8be..a581d60 100644 --- a/arch/mips/include/asm/mipsregs.h +++ b/arch/mips/include/asm/mipsregs.h @@ -220,6 +220,22 @@ #error Bad page size configuration! #endif +/* + * Default huge tlb size for a given kernel configuration + */ +#ifdef CONFIG_PAGE_SIZE_4KB +#define PM_HUGE_MASK PM_1M +#elif defined(CONFIG_PAGE_SIZE_8KB) +#define PM_HUGE_MASK PM_4M +#elif defined(CONFIG_PAGE_SIZE_16KB) +#define PM_HUGE_MASK PM_16M +#elif defined(CONFIG_PAGE_SIZE_32KB) +#define PM_HUGE_MASK PM_64M +#elif defined(CONFIG_PAGE_SIZE_64KB) +#define PM_HUGE_MASK PM_256M +#elif defined(CONFIG_HUGETLB_PAGE) +#error Bad page size configuration for hugetlbfs! +#endif /* * Values used for computation of new tlb entries diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h index 72c80d2..dc0eaa7 100644 --- a/arch/mips/include/asm/page.h +++ b/arch/mips/include/asm/page.h @@ -32,6 +32,11 @@ #define PAGE_SIZE (1UL << PAGE_SHIFT) #define PAGE_MASK (~((1 << PAGE_SHIFT) - 1)) +#define HPAGE_SHIFT (PAGE_SHIFT + PAGE_SHIFT - 3) +#define HPAGE_SIZE ((1UL) << HPAGE_SHIFT) +#define HPAGE_MASK (~(HPAGE_SIZE - 1)) +#define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT) + #ifndef __ASSEMBLY__ #include <linux/pfn.h> diff --git a/arch/mips/include/asm/pgtable-bits.h b/arch/mips/include/asm/pgtable-bits.h index 51b34a4..1073e6d 100644 --- a/arch/mips/include/asm/pgtable-bits.h +++ b/arch/mips/include/asm/pgtable-bits.h @@ -72,6 +72,7 @@ #else #define _PAGE_R4KBUG (1<<5) /* workaround for r4k bug */ +#define _PAGE_HUGE (1<<5) /* huge tlb page */ #define _PAGE_GLOBAL (1<<6) #define _PAGE_VALID (1<<7) #define _PAGE_SILENT_READ (1<<7) /* synonym */ diff --git a/arch/mips/include/asm/pgtable.h b/arch/mips/include/asm/pgtable.h index 6a0edf7..1a9f9b2 100644 --- a/arch/mips/include/asm/pgtable.h +++ b/arch/mips/include/asm/pgtable.h @@ -292,6 +292,16 @@ static inline pte_t pte_mkyoung(pte_t pte) pte_val(pte) |= _PAGE_SILENT_READ; return pte; } + +#ifdef _PAGE_HUGE +static inline int pte_huge(pte_t pte) { return pte_val(pte) & _PAGE_HUGE; } + +static inline pte_t pte_mkhuge(pte_t pte) +{ + pte_val(pte) |= _PAGE_HUGE; + return pte; +} +#endif /* _PAGE_HUGE */ #endif static inline int pte_special(pte_t pte) { return 0; } static inline pte_t pte_mkspecial(pte_t pte) { return pte; } -- cgit v1.1 From fd062c847a8cea2821347d7e18165dfa658f7dce Mon Sep 17 00:00:00 2001 From: David Daney <ddaney@caviumnetworks.com> Date: Wed, 27 May 2009 17:47:44 -0700 Subject: MIPS: TLB support for hugetlbfs. The TLB handlers need to check for huge pages and give them special handling. Huge pages consist of two contiguous sub-pages of physical memory. * Loading entrylo0 and entrylo1 need to be handled specially. * The page mask must be set for huge pages and then restored after writing the TLB entries. * The PTE for huge pages resides in the PMD, we halt traversal of the tables there. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/mm/tlb-r4k.c | 43 +++++++++---- arch/mips/mm/tlbex.c | 165 ++++++++++++++++++++++++++++++++++++++++++++++++- 2 files changed, 196 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c index 892be42..f60fe51 100644 --- a/arch/mips/mm/tlb-r4k.c +++ b/arch/mips/mm/tlb-r4k.c @@ -11,6 +11,7 @@ #include <linux/init.h> #include <linux/sched.h> #include <linux/mm.h> +#include <linux/hugetlb.h> #include <asm/cpu.h> #include <asm/bootinfo.h> @@ -295,21 +296,41 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte) pudp = pud_offset(pgdp, address); pmdp = pmd_offset(pudp, address); idx = read_c0_index(); - ptep = pte_offset_map(pmdp, address); +#ifdef CONFIG_HUGETLB_PAGE + /* this could be a huge page */ + if (pmd_huge(*pmdp)) { + unsigned long lo; + write_c0_pagemask(PM_HUGE_MASK); + ptep = (pte_t *)pmdp; + lo = pte_val(*ptep) >> 6; + write_c0_entrylo0(lo); + write_c0_entrylo1(lo + (HPAGE_SIZE >> 7)); + + mtc0_tlbw_hazard(); + if (idx < 0) + tlb_write_random(); + else + tlb_write_indexed(); + write_c0_pagemask(PM_DEFAULT_MASK); + } else +#endif + { + ptep = pte_offset_map(pmdp, address); #if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) - write_c0_entrylo0(ptep->pte_high); - ptep++; - write_c0_entrylo1(ptep->pte_high); + write_c0_entrylo0(ptep->pte_high); + ptep++; + write_c0_entrylo1(ptep->pte_high); #else - write_c0_entrylo0(pte_val(*ptep++) >> 6); - write_c0_entrylo1(pte_val(*ptep) >> 6); + write_c0_entrylo0(pte_val(*ptep++) >> 6); + write_c0_entrylo1(pte_val(*ptep) >> 6); #endif - mtc0_tlbw_hazard(); - if (idx < 0) - tlb_write_random(); - else - tlb_write_indexed(); + mtc0_tlbw_hazard(); + if (idx < 0) + tlb_write_random(); + else + tlb_write_indexed(); + } tlbw_use_hazard(); FLUSH_ITLB_VM(vma); EXIT_CRITICAL(flags); diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index 62fbd0d..8f606ea 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -8,6 +8,7 @@ * Copyright (C) 2004, 2005, 2006, 2008 Thiemo Seufer * Copyright (C) 2005, 2007, 2008, 2009 Maciej W. Rozycki * Copyright (C) 2006 Ralf Baechle (ralf@linux-mips.org) + * Copyright (C) 2008, 2009 Cavium Networks, Inc. * * ... and the days got worse and worse and now you see * I've gone completly out of my mind. @@ -83,6 +84,9 @@ enum label_id { label_nopage_tlbm, label_smp_pgtable_change, label_r3000_write_probe_fail, +#ifdef CONFIG_HUGETLB_PAGE + label_tlb_huge_update, +#endif }; UASM_L_LA(_second_part) @@ -99,6 +103,9 @@ UASM_L_LA(_nopage_tlbs) UASM_L_LA(_nopage_tlbm) UASM_L_LA(_smp_pgtable_change) UASM_L_LA(_r3000_write_probe_fail) +#ifdef CONFIG_HUGETLB_PAGE +UASM_L_LA(_tlb_huge_update) +#endif /* * For debug purposes. @@ -126,6 +133,7 @@ static inline void dump_handler(const u32 *handler, int count) #define C0_TCBIND 2, 2 #define C0_ENTRYLO1 3, 0 #define C0_CONTEXT 4, 0 +#define C0_PAGEMASK 5, 0 #define C0_BADVADDR 8, 0 #define C0_ENTRYHI 10, 0 #define C0_EPC 14, 0 @@ -383,6 +391,98 @@ static void __cpuinit build_tlb_write_entry(u32 **p, struct uasm_label **l, } } +#ifdef CONFIG_HUGETLB_PAGE +static __cpuinit void build_huge_tlb_write_entry(u32 **p, + struct uasm_label **l, + struct uasm_reloc **r, + unsigned int tmp, + enum tlb_write_entry wmode) +{ + /* Set huge page tlb entry size */ + uasm_i_lui(p, tmp, PM_HUGE_MASK >> 16); + uasm_i_ori(p, tmp, tmp, PM_HUGE_MASK & 0xffff); + uasm_i_mtc0(p, tmp, C0_PAGEMASK); + + build_tlb_write_entry(p, l, r, wmode); + + /* Reset default page size */ + if (PM_DEFAULT_MASK >> 16) { + uasm_i_lui(p, tmp, PM_DEFAULT_MASK >> 16); + uasm_i_ori(p, tmp, tmp, PM_DEFAULT_MASK & 0xffff); + uasm_il_b(p, r, label_leave); + uasm_i_mtc0(p, tmp, C0_PAGEMASK); + } else if (PM_DEFAULT_MASK) { + uasm_i_ori(p, tmp, 0, PM_DEFAULT_MASK); + uasm_il_b(p, r, label_leave); + uasm_i_mtc0(p, tmp, C0_PAGEMASK); + } else { + uasm_il_b(p, r, label_leave); + uasm_i_mtc0(p, 0, C0_PAGEMASK); + } +} + +/* + * Check if Huge PTE is present, if so then jump to LABEL. + */ +static void __cpuinit +build_is_huge_pte(u32 **p, struct uasm_reloc **r, unsigned int tmp, + unsigned int pmd, int lid) +{ + UASM_i_LW(p, tmp, 0, pmd); + uasm_i_andi(p, tmp, tmp, _PAGE_HUGE); + uasm_il_bnez(p, r, tmp, lid); +} + +static __cpuinit void build_huge_update_entries(u32 **p, + unsigned int pte, + unsigned int tmp) +{ + int small_sequence; + + /* + * A huge PTE describes an area the size of the + * configured huge page size. This is twice the + * of the large TLB entry size we intend to use. + * A TLB entry half the size of the configured + * huge page size is configured into entrylo0 + * and entrylo1 to cover the contiguous huge PTE + * address space. + */ + small_sequence = (HPAGE_SIZE >> 7) < 0x10000; + + /* We can clobber tmp. It isn't used after this.*/ + if (!small_sequence) + uasm_i_lui(p, tmp, HPAGE_SIZE >> (7 + 16)); + + UASM_i_SRL(p, pte, pte, 6); /* convert to entrylo */ + uasm_i_mtc0(p, pte, C0_ENTRYLO0); /* load it */ + /* convert to entrylo1 */ + if (small_sequence) + UASM_i_ADDIU(p, pte, pte, HPAGE_SIZE >> 7); + else + UASM_i_ADDU(p, pte, pte, tmp); + + uasm_i_mtc0(p, pte, C0_ENTRYLO1); /* load it */ +} + +static __cpuinit void build_huge_handler_tail(u32 **p, + struct uasm_reloc **r, + struct uasm_label **l, + unsigned int pte, + unsigned int ptr) +{ +#ifdef CONFIG_SMP + UASM_i_SC(p, pte, 0, ptr); + uasm_il_beqz(p, r, pte, label_tlb_huge_update); + UASM_i_LW(p, pte, 0, ptr); /* Needed because SC killed our PTE */ +#else + UASM_i_SW(p, pte, 0, ptr); +#endif + build_huge_update_entries(p, pte, ptr); + build_huge_tlb_write_entry(p, l, r, pte, tlb_indexed); +} +#endif /* CONFIG_HUGETLB_PAGE */ + #ifdef CONFIG_64BIT /* * TMP and PTR are scratch. @@ -689,12 +789,23 @@ static void __cpuinit build_r4000_tlb_refill_handler(void) build_get_pgde32(&p, K0, K1); /* get pgd in K1 */ #endif +#ifdef CONFIG_HUGETLB_PAGE + build_is_huge_pte(&p, &r, K0, K1, label_tlb_huge_update); +#endif + build_get_ptep(&p, K0, K1); build_update_entries(&p, K0, K1); build_tlb_write_entry(&p, &l, &r, tlb_random); uasm_l_leave(&l, p); uasm_i_eret(&p); /* return from trap */ +#ifdef CONFIG_HUGETLB_PAGE + uasm_l_tlb_huge_update(&l, p); + UASM_i_LW(&p, K0, 0, K1); + build_huge_update_entries(&p, K0, K1); + build_huge_tlb_write_entry(&p, &l, &r, K0, tlb_random); +#endif + #ifdef CONFIG_64BIT build_get_pgd_vmalloc64(&p, &l, &r, K0, K1); #endif @@ -733,7 +844,9 @@ static void __cpuinit build_r4000_tlb_refill_handler(void) uasm_copy_handler(relocs, labels, tlb_handler, p, f); final_len = p - tlb_handler; } else { -#ifdef MODULE_START +#if defined(CONFIG_HUGETLB_PAGE) + const enum label_id ls = label_tlb_huge_update; +#elif defined(MODULE_START) const enum label_id ls = label_module_alloc; #else const enum label_id ls = label_vmalloc; @@ -1130,6 +1243,15 @@ build_r4000_tlbchange_handler_head(u32 **p, struct uasm_label **l, build_get_pgde32(p, pte, ptr); /* get pgd in ptr */ #endif +#ifdef CONFIG_HUGETLB_PAGE + /* + * For huge tlb entries, pmd doesn't contain an address but + * instead contains the tlb pte. Check the PAGE_HUGE bit and + * see if we need to jump to huge tlb processing. + */ + build_is_huge_pte(p, r, pte, ptr, label_tlb_huge_update); +#endif + UASM_i_MFC0(p, pte, C0_BADVADDR); UASM_i_LW(p, ptr, 0, ptr); UASM_i_SRL(p, pte, pte, PAGE_SHIFT + PTE_ORDER - PTE_T_LOG2); @@ -1187,6 +1309,19 @@ static void __cpuinit build_r4000_tlb_load_handler(void) build_make_valid(&p, &r, K0, K1); build_r4000_tlbchange_handler_tail(&p, &l, &r, K0, K1); +#ifdef CONFIG_HUGETLB_PAGE + /* + * This is the entry point when build_r4000_tlbchange_handler_head + * spots a huge page. + */ + uasm_l_tlb_huge_update(&l, p); + iPTE_LW(&p, K0, K1); + build_pte_present(&p, &r, K0, K1, label_nopage_tlbl); + build_tlb_probe_entry(&p); + uasm_i_ori(&p, K0, K0, (_PAGE_ACCESSED | _PAGE_VALID)); + build_huge_handler_tail(&p, &r, &l, K0, K1); +#endif + uasm_l_nopage_tlbl(&l, p); uasm_i_j(&p, (unsigned long)tlb_do_page_fault_0 & 0x0fffffff); uasm_i_nop(&p); @@ -1218,6 +1353,20 @@ static void __cpuinit build_r4000_tlb_store_handler(void) build_make_write(&p, &r, K0, K1); build_r4000_tlbchange_handler_tail(&p, &l, &r, K0, K1); +#ifdef CONFIG_HUGETLB_PAGE + /* + * This is the entry point when + * build_r4000_tlbchange_handler_head spots a huge page. + */ + uasm_l_tlb_huge_update(&l, p); + iPTE_LW(&p, K0, K1); + build_pte_writable(&p, &r, K0, K1, label_nopage_tlbs); + build_tlb_probe_entry(&p); + uasm_i_ori(&p, K0, K0, + _PAGE_ACCESSED | _PAGE_MODIFIED | _PAGE_VALID | _PAGE_DIRTY); + build_huge_handler_tail(&p, &r, &l, K0, K1); +#endif + uasm_l_nopage_tlbs(&l, p); uasm_i_j(&p, (unsigned long)tlb_do_page_fault_1 & 0x0fffffff); uasm_i_nop(&p); @@ -1250,6 +1399,20 @@ static void __cpuinit build_r4000_tlb_modify_handler(void) build_make_write(&p, &r, K0, K1); build_r4000_tlbchange_handler_tail(&p, &l, &r, K0, K1); +#ifdef CONFIG_HUGETLB_PAGE + /* + * This is the entry point when + * build_r4000_tlbchange_handler_head spots a huge page. + */ + uasm_l_tlb_huge_update(&l, p); + iPTE_LW(&p, K0, K1); + build_pte_modifiable(&p, &r, K0, K1, label_nopage_tlbm); + build_tlb_probe_entry(&p); + uasm_i_ori(&p, K0, K0, + _PAGE_ACCESSED | _PAGE_MODIFIED | _PAGE_VALID | _PAGE_DIRTY); + build_huge_handler_tail(&p, &r, &l, K0, K1); +#endif + uasm_l_nopage_tlbm(&l, p); uasm_i_j(&p, (unsigned long)tlb_do_page_fault_1 & 0x0fffffff); uasm_i_nop(&p); -- cgit v1.1 From 9cffd154cf6817b130762501b91e753524ba2cd4 Mon Sep 17 00:00:00 2001 From: David Daney <ddaney@caviumnetworks.com> Date: Wed, 27 May 2009 17:47:46 -0700 Subject: MIPS: Kconfig Add SYS_SUPPORTS_HUGETLBFS and enable it for some systems. Add new kconfig variables SYS_SUPPORTS_HUGETLBFS and CPU_SUPPORTS_HUGEPAGES. They are enabled for systems that are known to support huge pages. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/Kconfig | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'arch') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 96f05e5..cebebf1 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -853,6 +853,11 @@ config SYS_SUPPORTS_BIG_ENDIAN config SYS_SUPPORTS_LITTLE_ENDIAN bool +config SYS_SUPPORTS_HUGETLBFS + bool + depends on CPU_SUPPORTS_HUGEPAGES && 64BIT + default y + config IRQ_CPU bool @@ -1057,6 +1062,7 @@ config CPU_MIPS64_R1 select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL select CPU_SUPPORTS_HIGHMEM + select CPU_SUPPORTS_HUGEPAGES help Choose this option to build a kernel for release 1 or later of the MIPS64 architecture. Many modern embedded systems with a 64-bit @@ -1076,6 +1082,7 @@ config CPU_MIPS64_R2 select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL select CPU_SUPPORTS_HIGHMEM + select CPU_SUPPORTS_HUGEPAGES help Choose this option to build a kernel for release 2 or later of the MIPS64 architecture. Many modern embedded systems with a 64-bit @@ -1162,6 +1169,7 @@ config CPU_R5500 select CPU_HAS_LLSC select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL + select CPU_SUPPORTS_HUGEPAGES help NEC VR5500 and VR5500A series processors implement 64-bit MIPS IV instruction set. @@ -1247,6 +1255,7 @@ config CPU_CAVIUM_OCTEON select WEAK_ORDERING select WEAK_REORDERING_BEYOND_LLSC select CPU_SUPPORTS_HIGHMEM + select CPU_SUPPORTS_HUGEPAGES help The Cavium Octeon processor is a highly integrated chip containing many ethernet hardware widgets for networking tasks. The processor @@ -1366,6 +1375,8 @@ config CPU_SUPPORTS_32BIT_KERNEL bool config CPU_SUPPORTS_64BIT_KERNEL bool +config CPU_SUPPORTS_HUGEPAGES + bool # # Set to y for ptrace access to watch registers. -- cgit v1.1 From fbeda19f82aa07082d2e1607a9f5114141dae2ac Mon Sep 17 00:00:00 2001 From: David Daney <ddaney@caviumnetworks.com> Date: Wed, 13 May 2009 15:59:55 -0700 Subject: MIPS: Allow CPU specific overriding of CP0 hwrena impl bits. Some CPUs have implementation dependent rdhwr registers. Allow them to be enabled on a per CPU basis. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/include/asm/cpu-features.h | 4 ++++ arch/mips/kernel/traps.c | 2 +- 2 files changed, 5 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/include/asm/cpu-features.h b/arch/mips/include/asm/cpu-features.h index 1cba4b2..8ab1d12 100644 --- a/arch/mips/include/asm/cpu-features.h +++ b/arch/mips/include/asm/cpu-features.h @@ -234,4 +234,8 @@ #define cpu_scache_line_size() cpu_data[0].scache.linesz #endif +#ifndef cpu_hwrena_impl_bits +#define cpu_hwrena_impl_bits 0 +#endif + #endif /* __ASM_CPU_FEATURES_H */ diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index e83da17..f548717 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -1502,7 +1502,7 @@ void __cpuinit per_cpu_trap_init(void) status_set); if (cpu_has_mips_r2) { - unsigned int enable = 0x0000000f; + unsigned int enable = 0x0000000f | cpu_hwrena_impl_bits; if (!noulri && cpu_has_userlocal) enable |= (1 << 29); -- cgit v1.1 From 4bb1a1089e321d685967032497f4363081eab3a9 Mon Sep 17 00:00:00 2001 From: David Daney <ddaney@caviumnetworks.com> Date: Wed, 13 May 2009 15:59:56 -0700 Subject: MIPS: Move Cavium CP0 hwrena impl bits to cpu-feature-overrides.h We had an ugly #ifdef for Cavium Octeon hwrena bits in traps.c, remove it to mach-cavium-octeon/cpu-feature-overrides.h Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h | 1 + arch/mips/kernel/traps.c | 4 ---- 2 files changed, 1 insertion(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h b/arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h index bb291f4..3d830756 100644 --- a/arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h +++ b/arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h @@ -53,6 +53,7 @@ #define cpu_has_userlocal 0 #define cpu_has_vint 0 #define cpu_has_veic 0 +#define cpu_hwrena_impl_bits 0xc0000000 #define ARCH_HAS_READ_CURRENT_TIMER 1 #define ARCH_HAS_IRQ_PER_CPU 1 #define ARCH_HAS_SPINLOCK_PREFETCH 1 diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index f548717..08f1edf 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -1510,10 +1510,6 @@ void __cpuinit per_cpu_trap_init(void) write_c0_hwrena(enable); } -#ifdef CONFIG_CPU_CAVIUM_OCTEON - write_c0_hwrena(0xc000000f); /* Octeon has register 30 and 31 */ -#endif - #ifdef CONFIG_MIPS_MT_SMTC if (!secondaryTC) { #endif /* CONFIG_MIPS_MT_SMTC */ -- cgit v1.1 From 363c55cae53742f3f685a1814912c6d4fda245b4 Mon Sep 17 00:00:00 2001 From: Wu Zhangjin <wuzj@lemote.com> Date: Thu, 4 Jun 2009 20:27:10 +0800 Subject: MIPS: Add hibernation support [Ralf: SMP support requires CPU hotplugging which MIPS currently doesn't support. As implemented in this patch cache and tlb flushing will also be invoked with interrupts disabled so smp_call_function() will blow up in charming ways. So limit to !SMP.] Reviewed-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Yan Hua <yanh@lemote.com> Reviewed-by: Arnaud Patard <apatard@mandriva.com> Reviewed-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Wu Zhangjin <wuzj@lemote.com> Signed-off-by: Hu Hongbing <huhb@lemote.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/Kconfig | 4 +++ arch/mips/Makefile | 3 ++ arch/mips/include/asm/suspend.h | 9 ++++++ arch/mips/kernel/asm-offsets.c | 13 ++++++++ arch/mips/power/Makefile | 1 + arch/mips/power/cpu.c | 43 +++++++++++++++++++++++++ arch/mips/power/hibernate.S | 70 +++++++++++++++++++++++++++++++++++++++++ 7 files changed, 143 insertions(+) create mode 100644 arch/mips/include/asm/suspend.h create mode 100644 arch/mips/power/Makefile create mode 100644 arch/mips/power/cpu.c create mode 100644 arch/mips/power/hibernate.S (limited to 'arch') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index cebebf1..b29f028 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -2134,6 +2134,10 @@ endmenu menu "Power management options" +config ARCH_HIBERNATION_POSSIBLE + def_bool y + depends on !SMP + config ARCH_SUSPEND_POSSIBLE def_bool y depends on !SMP diff --git a/arch/mips/Makefile b/arch/mips/Makefile index e5ccc34..807572a 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -677,6 +677,9 @@ core-y += arch/mips/kernel/ arch/mips/mm/ arch/mips/math-emu/ drivers-$(CONFIG_OPROFILE) += arch/mips/oprofile/ +# suspend and hibernation support +drivers-$(CONFIG_PM) += arch/mips/power/ + ifdef CONFIG_LASAT rom.bin rom.sw: vmlinux $(Q)$(MAKE) $(build)=arch/mips/lasat/image $@ diff --git a/arch/mips/include/asm/suspend.h b/arch/mips/include/asm/suspend.h new file mode 100644 index 0000000..294cdb6 --- /dev/null +++ b/arch/mips/include/asm/suspend.h @@ -0,0 +1,9 @@ +#ifndef __ASM_SUSPEND_H +#define __ASM_SUSPEND_H + +static inline int arch_prepare_suspend(void) { return 0; } + +/* References to section boundaries */ +extern const void __nosave_begin, __nosave_end; + +#endif /* __ASM_SUSPEND_H */ diff --git a/arch/mips/kernel/asm-offsets.c b/arch/mips/kernel/asm-offsets.c index c901c22..8d006ec 100644 --- a/arch/mips/kernel/asm-offsets.c +++ b/arch/mips/kernel/asm-offsets.c @@ -14,6 +14,7 @@ #include <linux/mm.h> #include <linux/interrupt.h> #include <linux/kbuild.h> +#include <linux/suspend.h> #include <asm/ptrace.h> #include <asm/processor.h> @@ -326,3 +327,15 @@ void output_octeon_cop2_state_defines(void) BLANK(); } #endif + +#ifdef CONFIG_HIBERNATION +void output_pbe_defines(void) +{ + COMMENT(" Linux struct pbe offsets. "); + OFFSET(PBE_ADDRESS, pbe, address); + OFFSET(PBE_ORIG_ADDRESS, pbe, orig_address); + OFFSET(PBE_NEXT, pbe, next); + DEFINE(PBE_SIZE, sizeof(struct pbe)); + BLANK(); +} +#endif diff --git a/arch/mips/power/Makefile b/arch/mips/power/Makefile new file mode 100644 index 0000000..73d56b8 --- /dev/null +++ b/arch/mips/power/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_HIBERNATION) += cpu.o hibernate.o diff --git a/arch/mips/power/cpu.c b/arch/mips/power/cpu.c new file mode 100644 index 0000000..7995df4 --- /dev/null +++ b/arch/mips/power/cpu.c @@ -0,0 +1,43 @@ +/* + * Suspend support specific for mips. + * + * Licensed under the GPLv2 + * + * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology + * Author: Hu Hongbing <huhb@lemote.com> + * Wu Zhangjin <wuzj@lemote.com> + */ +#include <asm/suspend.h> +#include <asm/fpu.h> +#include <asm/dsp.h> + +static u32 saved_status; +struct pt_regs saved_regs; + +void save_processor_state(void) +{ + saved_status = read_c0_status(); + + if (is_fpu_owner()) + save_fp(current); + if (cpu_has_dsp) + save_dsp(current); +} + +void restore_processor_state(void) +{ + write_c0_status(saved_status); + + if (is_fpu_owner()) + restore_fp(current); + if (cpu_has_dsp) + restore_dsp(current); +} + +int pfn_is_nosave(unsigned long pfn) +{ + unsigned long nosave_begin_pfn = PFN_DOWN(__pa(&__nosave_begin)); + unsigned long nosave_end_pfn = PFN_UP(__pa(&__nosave_end)); + + return (pfn >= nosave_begin_pfn) && (pfn < nosave_end_pfn); +} diff --git a/arch/mips/power/hibernate.S b/arch/mips/power/hibernate.S new file mode 100644 index 0000000..486bd3f --- /dev/null +++ b/arch/mips/power/hibernate.S @@ -0,0 +1,70 @@ +/* + * Hibernation support specific for mips - temporary page tables + * + * Licensed under the GPLv2 + * + * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology + * Author: Hu Hongbing <huhb@lemote.com> + * Wu Zhangjin <wuzj@lemote.com> + */ +#include <asm/asm-offsets.h> +#include <asm/regdef.h> +#include <asm/asm.h> + +.text +LEAF(swsusp_arch_suspend) + PTR_LA t0, saved_regs + PTR_S ra, PT_R31(t0) + PTR_S sp, PT_R29(t0) + PTR_S fp, PT_R30(t0) + PTR_S gp, PT_R28(t0) + PTR_S s0, PT_R16(t0) + PTR_S s1, PT_R17(t0) + PTR_S s2, PT_R18(t0) + PTR_S s3, PT_R19(t0) + PTR_S s4, PT_R20(t0) + PTR_S s5, PT_R21(t0) + PTR_S s6, PT_R22(t0) + PTR_S s7, PT_R23(t0) + j swsusp_save +END(swsusp_arch_suspend) + +LEAF(swsusp_arch_resume) + PTR_L t0, restore_pblist +0: + PTR_L t1, PBE_ADDRESS(t0) /* source */ + PTR_L t2, PBE_ORIG_ADDRESS(t0) /* destination */ + PTR_ADDIU t3, t1, _PAGE_SIZE +1: + REG_L t8, (t1) + REG_S t8, (t2) + PTR_ADDIU t1, t1, SZREG + PTR_ADDIU t2, t2, SZREG + bne t1, t3, 1b + PTR_L t0, PBE_NEXT(t0) + bnez t0, 0b + /* flush caches to make sure context is in memory */ + PTR_L t0, __flush_cache_all + jalr t0 + /* flush tlb entries */ +#ifdef CONFIG_SMP + jal flush_tlb_all +#else + jal local_flush_tlb_all +#endif + PTR_LA t0, saved_regs + PTR_L ra, PT_R31(t0) + PTR_L sp, PT_R29(t0) + PTR_L fp, PT_R30(t0) + PTR_L gp, PT_R28(t0) + PTR_L s0, PT_R16(t0) + PTR_L s1, PT_R17(t0) + PTR_L s2, PT_R18(t0) + PTR_L s3, PT_R19(t0) + PTR_L s4, PT_R20(t0) + PTR_L s5, PT_R21(t0) + PTR_L s6, PT_R22(t0) + PTR_L s7, PT_R23(t0) + PTR_LI v0, 0x0 + jr ra +END(swsusp_arch_resume) -- cgit v1.1 From 84599f8a59e77699f18f06948cea171a349a3f0f Mon Sep 17 00:00:00 2001 From: Peter Zijlstra <peterz@infradead.org> Date: Tue, 16 Jun 2009 12:34:17 -0700 Subject: sched, x86: Fix cpufreq + sched_clock() TSC scaling For freqency dependent TSCs we only scale the cycles, we do not account for the discrepancy in absolute value. Our current formula is: time = cycles * mult (where mult is a function of the cpu-speed on variable tsc machines) Suppose our current cycle count is 10, and we have a multiplier of 5, then our time value would end up being 50. Now cpufreq comes along and changes the multiplier to say 3 or 7, which would result in our time being resp. 30 or 70. That means that we can observe random jumps in the time value due to frequency changes in both fwd and bwd direction. So what this patch does is change the formula to: time = cycles * frequency + offset And we calculate offset so that time_before == time_after, thereby ridding us of these jumps in time. [ Impact: fix/reduce sched_clock() jumps across frequency changing events ] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu> Chucked-on-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> --- arch/x86/include/asm/timer.h | 6 +++++- arch/x86/kernel/tsc.c | 8 ++++++-- 2 files changed, 11 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/timer.h b/arch/x86/include/asm/timer.h index bd37ed4..20ca9c4 100644 --- a/arch/x86/include/asm/timer.h +++ b/arch/x86/include/asm/timer.h @@ -45,12 +45,16 @@ extern int no_timer_check; */ DECLARE_PER_CPU(unsigned long, cyc2ns); +DECLARE_PER_CPU(unsigned long long, cyc2ns_offset); #define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */ static inline unsigned long long __cycles_2_ns(unsigned long long cyc) { - return cyc * per_cpu(cyc2ns, smp_processor_id()) >> CYC2NS_SCALE_FACTOR; + int cpu = smp_processor_id(); + unsigned long long ns = per_cpu(cyc2ns_offset, cpu); + ns += cyc * per_cpu(cyc2ns, cpu) >> CYC2NS_SCALE_FACTOR; + return ns; } static inline unsigned long long cycles_2_ns(unsigned long long cyc) diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c index 3e1c057..ef4dac5 100644 --- a/arch/x86/kernel/tsc.c +++ b/arch/x86/kernel/tsc.c @@ -589,22 +589,26 @@ EXPORT_SYMBOL(recalibrate_cpu_khz); */ DEFINE_PER_CPU(unsigned long, cyc2ns); +DEFINE_PER_CPU(unsigned long long, cyc2ns_offset); static void set_cyc2ns_scale(unsigned long cpu_khz, int cpu) { - unsigned long long tsc_now, ns_now; + unsigned long long tsc_now, ns_now, *offset; unsigned long flags, *scale; local_irq_save(flags); sched_clock_idle_sleep_event(); scale = &per_cpu(cyc2ns, cpu); + offset = &per_cpu(cyc2ns_offset, cpu); rdtscll(tsc_now); ns_now = __cycles_2_ns(tsc_now); - if (cpu_khz) + if (cpu_khz) { *scale = (NSEC_PER_MSEC << CYC2NS_SCALE_FACTOR)/cpu_khz; + *offset = ns_now - (tsc_now * *scale >> CYC2NS_SCALE_FACTOR); + } sched_clock_idle_wakeup_event(0); local_irq_restore(flags); -- cgit v1.1 From 5ce4243dcefbbc43791ffc36e1be55067ceec916 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov <gorcunov@gmail.com> Date: Mon, 15 Jun 2009 22:26:33 +0400 Subject: x86: mce: Don't touch THERMAL_APIC_VECTOR if no active APIC present MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If APIC was disabled (for some reason) and as result it's not even mapped we should not try to enable thermal interrupts at all. Reported-by: Simon Holm Thøgersen <odie@cs.aau.dk> Tested-by: Simon Holm Thøgersen <odie@cs.aau.dk> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> LKML-Reference: <20090615182633.GA7606@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/kernel/cpu/mcheck/mce_intel.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/mcheck/mce_intel.c b/arch/x86/kernel/cpu/mcheck/mce_intel.c index 2b011d2..61e3288 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_intel.c +++ b/arch/x86/kernel/cpu/mcheck/mce_intel.c @@ -21,9 +21,15 @@ void intel_init_thermal(struct cpuinfo_x86 *c) int tm2 = 0; u32 l, h; - /* Thermal monitoring depends on ACPI and clock modulation*/ - if (!cpu_has(c, X86_FEATURE_ACPI) || !cpu_has(c, X86_FEATURE_ACC)) + /* + * Thermal monitoring depends on ACPI, clock modulation + * and APIC as well + */ + if (!cpu_has(c, X86_FEATURE_ACPI) || !cpu_has(c, X86_FEATURE_ACC) || + !cpu_has(c, X86_FEATURE_APIC)) { + pr_debug("Thermal monitoring disabled\n"); return; + } /* * First check if its enabled already, in which case there might -- cgit v1.1 From 50a8d4d29735ec99139e58ea3cb11bed3331cf87 Mon Sep 17 00:00:00 2001 From: "Figo.zhang" <figo1802@gmail.com> Date: Wed, 17 Jun 2009 22:25:20 +0800 Subject: x86, io_apic.c: Work around compiler warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This compiler warning: arch/x86/kernel/apic/io_apic.c: In function ‘ioapic_write_entry’: arch/x86/kernel/apic/io_apic.c:466: warning: ‘eu’ is used uninitialized in this function arch/x86/kernel/apic/io_apic.c:465: note: ‘eu’ was declared here Is bogus as 'eu' is always initialized. But annotate it away by initializing the variable, to make it easier for people to notice real warnings. A compiler that sees through this logic will optimize away the initialization. Signed-off-by: Figo.zhang <figo1802@gmail.com> LKML-Reference: <1245248720.3312.27.camel@myhost> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/kernel/apic/io_apic.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index ef8d929..95e0370 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -462,7 +462,8 @@ static struct IO_APIC_route_entry ioapic_read_entry(int apic, int pin) static void __ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e) { - union entry_union eu; + union entry_union eu = {{0, 0}}; + eu.entry = e; io_apic_write(apic, 0x11 + 2*pin, eu.w2); io_apic_write(apic, 0x10 + 2*pin, eu.w1); -- cgit v1.1 From 8f7007aabee22d6c186070e9532b0965f6036bb7 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput <jaswinder@kernel.org> Date: Wed, 10 Jun 2009 12:41:01 -0700 Subject: x86: apic/io_apic.c: dmar_msi_type should be static Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/kernel/apic/io_apic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 95e0370..29d0752 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -3568,7 +3568,7 @@ static int dmar_msi_set_affinity(unsigned int irq, const struct cpumask *mask) #endif /* CONFIG_SMP */ -struct irq_chip dmar_msi_type = { +static struct irq_chip dmar_msi_type = { .name = "DMAR_MSI", .unmask = dmar_msi_unmask, .mask = dmar_msi_mask, -- cgit v1.1 From 1bf7b31efa0c322d93cb3f772cd9bc743e8bb42d Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" <hpa@zytor.com> Date: Wed, 17 Jun 2009 08:31:15 -0700 Subject: x86, mce: mce_intel.c needs <asm/apic.h> mce_intel.c uses apic_write() and lapic_get_maxlvt(), and so it needs <asm/apic.h>. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> --- arch/x86/kernel/cpu/mcheck/mce_intel.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/mcheck/mce_intel.c b/arch/x86/kernel/cpu/mcheck/mce_intel.c index 663a88e..e1acec0f 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_intel.c +++ b/arch/x86/kernel/cpu/mcheck/mce_intel.c @@ -8,6 +8,7 @@ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/percpu.h> +#include <asm/apic.h> #include <asm/processor.h> #include <asm/msr.h> #include <asm/mce.h> -- cgit v1.1 From d186b86ffcad713a1dd3d03e9d4ce2d59f61a1ed Mon Sep 17 00:00:00 2001 From: Jes Sorensen <jes@sgi.com> Date: Wed, 17 Jun 2009 09:04:40 -0700 Subject: [IA64] Fix build error in paravirt_patchlist.c Andrew cleaned up some #include tangles in: commit 0d9c25dde878a636ee9a9b53923569171bf9a55b headers: move module_bug_finalize()/module_bug_cleanup() definitions into module.h which resulted in this build error for ia64: CC arch/ia64/kernel/paravirt_patchlist.o arch/ia64/kernel/paravirt_patchlist.c:43: error: expected '=', ',', ';', 'asm' or '__attribute__' before '__initdata' arch/ia64/kernel/paravirt_patchlist.c:54: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'paravirt_get_gate_patchlist' arch/ia64/kernel/paravirt_patchlist.c:76: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'paravirt_get_gate_section' make[1]: *** [arch/ia64/kernel/paravirt_patchlist.o] Error 1 The problem was that paravirt_patchlist.c was relying on some of the nested includes (specifically that linux/bug.h included linux/module.h Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com> --- arch/ia64/kernel/paravirt_patchlist.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/ia64/kernel/paravirt_patchlist.c b/arch/ia64/kernel/paravirt_patchlist.c index b28082a..0a70720 100644 --- a/arch/ia64/kernel/paravirt_patchlist.c +++ b/arch/ia64/kernel/paravirt_patchlist.c @@ -19,6 +19,8 @@ */ #include <linux/bug.h> +#include <linux/init.h> +#include <linux/kernel.h> #include <asm/paravirt.h> #define DECLARE(name) \ -- cgit v1.1 From fe955e5c793aab398794be4c5ede172d48446c4a Mon Sep 17 00:00:00 2001 From: Prarit Bhargava <prarit@redhat.com> Date: Wed, 10 Jun 2009 12:41:02 -0700 Subject: x86: nmi: Add Intel processor 0x6f4 to NMI perfctr1 workaround Expand Intel NMI perfctr1 workaround to include a Core2 processor stepping (cpuid family-6, model-f, stepping-4). Resolves a situation where the NMI would not enable on these processors. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Acked-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: prarit@redhat.com Cc: suresh.b.siddha@intel.com Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/kernel/cpu/perfctr-watchdog.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/perfctr-watchdog.c b/arch/x86/kernel/cpu/perfctr-watchdog.c index d6f5b9f..5c481f6 100644 --- a/arch/x86/kernel/cpu/perfctr-watchdog.c +++ b/arch/x86/kernel/cpu/perfctr-watchdog.c @@ -716,11 +716,15 @@ static void probe_nmi_watchdog(void) wd_ops = &k7_wd_ops; break; case X86_VENDOR_INTEL: - /* - * Work around Core Duo (Yonah) errata AE49 where perfctr1 - * doesn't have a working enable bit. + /* Work around where perfctr1 doesn't have a working enable + * bit as described in the following errata: + * AE49 Core Duo and Intel Core Solo 65 nm + * AN49 Intel Pentium Dual-Core + * AF49 Dual-Core Intel Xeon Processor LV */ - if (boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 14) { + if ((boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 14) || + ((boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 15 && + boot_cpu_data.x86_mask == 4))) { intel_arch_wd_ops.perfctr = MSR_ARCH_PERFMON_PERFCTR0; intel_arch_wd_ops.evntsel = MSR_ARCH_PERFMON_EVENTSEL0; } -- cgit v1.1 From e088a4ad7fa53c3dc3c29f930025f41ccf01953e Mon Sep 17 00:00:00 2001 From: Matthew Wilcox <matthew@wil.cx> Date: Fri, 22 May 2009 13:49:49 -0700 Subject: [IA64] Convert ia64 to use int-ll64.h It is generally agreed that it would be beneficial for u64 to be an unsigned long long on all architectures. ia64 (in common with several other 64-bit architectures) currently uses unsigned long. Migrating piecemeal is too painful; this giant patch fixes all compilation warnings and errors that come as a result of switching to use int-ll64.h. Note that userspace will still see __u64 defined as unsigned long. This is important as it affects C++ name mangling. [Updated by Tony Luck to change efi.h:efi_freemem_callback_t to use u64 for start/end rather than unsigned long] Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> --- arch/ia64/hp/common/sba_iommu.c | 2 +- arch/ia64/include/asm/gcc_intrin.h | 18 ++++----- arch/ia64/include/asm/mca.h | 38 +++++++++--------- arch/ia64/include/asm/meminit.h | 18 ++++----- arch/ia64/include/asm/pal.h | 24 ++++++------ arch/ia64/include/asm/processor.h | 56 +++++++++++++-------------- arch/ia64/include/asm/sal.h | 8 ++-- arch/ia64/include/asm/sn/sn_sal.h | 2 +- arch/ia64/include/asm/types.h | 13 +++++-- arch/ia64/kernel/efi.c | 10 ++--- arch/ia64/kernel/mca.c | 18 ++++----- arch/ia64/kernel/module.c | 14 ++++--- arch/ia64/kernel/palinfo.c | 68 ++++++++++++++++----------------- arch/ia64/kernel/pci-dma.c | 2 +- arch/ia64/kernel/perfmon.c | 6 +-- arch/ia64/kernel/setup.c | 32 ++++++++-------- arch/ia64/kernel/smp.c | 2 +- arch/ia64/kernel/smpboot.c | 2 +- arch/ia64/kernel/time.c | 2 +- arch/ia64/kernel/topology.c | 4 +- arch/ia64/kernel/uncached.c | 3 +- arch/ia64/mm/contig.c | 9 ++--- arch/ia64/mm/init.c | 15 +++----- arch/ia64/mm/tlb.c | 4 +- arch/ia64/pci/pci.c | 12 +++--- arch/ia64/sn/kernel/io_acpi_init.c | 4 +- arch/ia64/sn/kernel/io_common.c | 2 +- arch/ia64/sn/kernel/sn2/sn_hwperf.c | 4 +- arch/ia64/sn/kernel/sn2/sn_proc_fs.c | 2 +- arch/ia64/sn/kernel/tiocx.c | 2 +- arch/ia64/sn/pci/pcibr/pcibr_provider.c | 2 +- arch/ia64/sn/pci/tioca_provider.c | 6 +-- arch/ia64/sn/pci/tioce_provider.c | 6 +-- 33 files changed, 206 insertions(+), 204 deletions(-) (limited to 'arch') diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c index 56ceb68..21c0411 100644 --- a/arch/ia64/hp/common/sba_iommu.c +++ b/arch/ia64/hp/common/sba_iommu.c @@ -1787,7 +1787,7 @@ static struct ioc_iommu ioc_iommu_info[] __initdata = { }; static struct ioc * __init -ioc_init(u64 hpa, void *handle) +ioc_init(unsigned long hpa, void *handle) { struct ioc *ioc; struct ioc_iommu *info; diff --git a/arch/ia64/include/asm/gcc_intrin.h b/arch/ia64/include/asm/gcc_intrin.h index c2c5fd8..21ddee5 100644 --- a/arch/ia64/include/asm/gcc_intrin.h +++ b/arch/ia64/include/asm/gcc_intrin.h @@ -388,7 +388,7 @@ register unsigned long ia64_r13 asm ("r13") __used; #define ia64_native_thash(addr) \ ({ \ - __u64 ia64_intri_res; \ + unsigned long ia64_intri_res; \ asm volatile ("thash %0=%1" : "=r"(ia64_intri_res) : "r" (addr)); \ ia64_intri_res; \ }) @@ -419,7 +419,7 @@ register unsigned long ia64_r13 asm ("r13") __used; #define ia64_tpa(addr) \ ({ \ - __u64 ia64_pa; \ + unsigned long ia64_pa; \ asm volatile ("tpa %0 = %1" : "=r"(ia64_pa) : "r"(addr) : "memory"); \ ia64_pa; \ }) @@ -444,35 +444,35 @@ register unsigned long ia64_r13 asm ("r13") __used; #define ia64_native_get_cpuid(index) \ ({ \ - __u64 ia64_intri_res; \ + unsigned long ia64_intri_res; \ asm volatile ("mov %0=cpuid[%r1]" : "=r"(ia64_intri_res) : "rO"(index)); \ ia64_intri_res; \ }) #define __ia64_get_dbr(index) \ ({ \ - __u64 ia64_intri_res; \ + unsigned long ia64_intri_res; \ asm volatile ("mov %0=dbr[%1]" : "=r"(ia64_intri_res) : "r"(index)); \ ia64_intri_res; \ }) #define ia64_get_ibr(index) \ ({ \ - __u64 ia64_intri_res; \ + unsigned long ia64_intri_res; \ asm volatile ("mov %0=ibr[%1]" : "=r"(ia64_intri_res) : "r"(index)); \ ia64_intri_res; \ }) #define ia64_get_pkr(index) \ ({ \ - __u64 ia64_intri_res; \ + unsigned long ia64_intri_res; \ asm volatile ("mov %0=pkr[%1]" : "=r"(ia64_intri_res) : "r"(index)); \ ia64_intri_res; \ }) #define ia64_get_pmc(index) \ ({ \ - __u64 ia64_intri_res; \ + unsigned long ia64_intri_res; \ asm volatile ("mov %0=pmc[%1]" : "=r"(ia64_intri_res) : "r"(index)); \ ia64_intri_res; \ }) @@ -480,14 +480,14 @@ register unsigned long ia64_r13 asm ("r13") __used; #define ia64_native_get_pmd(index) \ ({ \ - __u64 ia64_intri_res; \ + unsigned long ia64_intri_res; \ asm volatile ("mov %0=pmd[%1]" : "=r"(ia64_intri_res) : "r"(index)); \ ia64_intri_res; \ }) #define ia64_native_get_rr(index) \ ({ \ - __u64 ia64_intri_res; \ + unsigned long ia64_intri_res; \ asm volatile ("mov %0=rr[%1]" : "=r"(ia64_intri_res) : "r" (index)); \ ia64_intri_res; \ }) diff --git a/arch/ia64/include/asm/mca.h b/arch/ia64/include/asm/mca.h index 18a4321..44a0b53 100644 --- a/arch/ia64/include/asm/mca.h +++ b/arch/ia64/include/asm/mca.h @@ -72,39 +72,39 @@ typedef struct ia64_mc_info_s { struct ia64_sal_os_state { /* SAL to OS */ - u64 os_gp; /* GP of the os registered with the SAL, physical */ - u64 pal_proc; /* PAL_PROC entry point, physical */ - u64 sal_proc; /* SAL_PROC entry point, physical */ - u64 rv_rc; /* MCA - Rendezvous state, INIT - reason code */ - u64 proc_state_param; /* from R18 */ - u64 monarch; /* 1 for a monarch event, 0 for a slave */ + unsigned long os_gp; /* GP of the os registered with the SAL, physical */ + unsigned long pal_proc; /* PAL_PROC entry point, physical */ + unsigned long sal_proc; /* SAL_PROC entry point, physical */ + unsigned long rv_rc; /* MCA - Rendezvous state, INIT - reason code */ + unsigned long proc_state_param; /* from R18 */ + unsigned long monarch; /* 1 for a monarch event, 0 for a slave */ /* common */ - u64 sal_ra; /* Return address in SAL, physical */ - u64 sal_gp; /* GP of the SAL - physical */ + unsigned long sal_ra; /* Return address in SAL, physical */ + unsigned long sal_gp; /* GP of the SAL - physical */ pal_min_state_area_t *pal_min_state; /* from R17. physical in asm, virtual in C */ /* Previous values of IA64_KR(CURRENT) and IA64_KR(CURRENT_STACK). * Note: if the MCA/INIT recovery code wants to resume to a new context * then it must change these values to reflect the new kernel stack. */ - u64 prev_IA64_KR_CURRENT; /* previous value of IA64_KR(CURRENT) */ - u64 prev_IA64_KR_CURRENT_STACK; + unsigned long prev_IA64_KR_CURRENT; /* previous value of IA64_KR(CURRENT) */ + unsigned long prev_IA64_KR_CURRENT_STACK; struct task_struct *prev_task; /* previous task, NULL if it is not useful */ /* Some interrupt registers are not saved in minstate, pt_regs or * switch_stack. Because MCA/INIT can occur when interrupts are * disabled, we need to save the additional interrupt registers over * MCA/INIT and resume. */ - u64 isr; - u64 ifa; - u64 itir; - u64 iipa; - u64 iim; - u64 iha; + unsigned long isr; + unsigned long ifa; + unsigned long itir; + unsigned long iipa; + unsigned long iim; + unsigned long iha; /* OS to SAL */ - u64 os_status; /* OS status to SAL, enum below */ - u64 context; /* 0 if return to same context + unsigned long os_status; /* OS status to SAL, enum below */ + unsigned long context; /* 0 if return to same context 1 if return to new context */ }; @@ -150,7 +150,7 @@ extern void ia64_slave_init_handler(void); extern void ia64_mca_cmc_vector_setup(void); extern int ia64_reg_MCA_extension(int (*fn)(void *, struct ia64_sal_os_state *)); extern void ia64_unreg_MCA_extension(void); -extern u64 ia64_get_rnat(u64 *); +extern unsigned long ia64_get_rnat(unsigned long *); extern void ia64_mca_printk(const char * fmt, ...) __attribute__ ((format (printf, 1, 2))); diff --git a/arch/ia64/include/asm/meminit.h b/arch/ia64/include/asm/meminit.h index c0cea37..688a812 100644 --- a/arch/ia64/include/asm/meminit.h +++ b/arch/ia64/include/asm/meminit.h @@ -25,8 +25,8 @@ #define IA64_MAX_RSVD_REGIONS 9 struct rsvd_region { - unsigned long start; /* virtual address of beginning of element */ - unsigned long end; /* virtual address of end of element + 1 */ + u64 start; /* virtual address of beginning of element */ + u64 end; /* virtual address of end of element + 1 */ }; extern struct rsvd_region rsvd_region[IA64_MAX_RSVD_REGIONS + 1]; @@ -35,13 +35,13 @@ extern int num_rsvd_regions; extern void find_memory (void); extern void reserve_memory (void); extern void find_initrd (void); -extern int filter_rsvd_memory (unsigned long start, unsigned long end, void *arg); -extern int filter_memory (unsigned long start, unsigned long end, void *arg); -extern unsigned long efi_memmap_init(unsigned long *s, unsigned long *e); -extern int find_max_min_low_pfn (unsigned long , unsigned long, void *); +extern int filter_rsvd_memory (u64 start, u64 end, void *arg); +extern int filter_memory (u64 start, u64 end, void *arg); +extern unsigned long efi_memmap_init(u64 *s, u64 *e); +extern int find_max_min_low_pfn (u64, u64, void *); extern unsigned long vmcore_find_descriptor_size(unsigned long address); -extern int reserve_elfcorehdr(unsigned long *start, unsigned long *end); +extern int reserve_elfcorehdr(u64 *start, u64 *end); /* * For rounding an address to the next IA64_GRANULE_SIZE or order @@ -63,8 +63,8 @@ extern int register_active_ranges(u64 start, u64 len, int nid); # define LARGE_GAP 0x40000000 /* Use virtual mem map if hole is > than this */ extern unsigned long vmalloc_end; extern struct page *vmem_map; - extern int find_largest_hole (u64 start, u64 end, void *arg); - extern int create_mem_map_page_table (u64 start, u64 end, void *arg); + extern int find_largest_hole(u64 start, u64 end, void *arg); + extern int create_mem_map_page_table(u64 start, u64 end, void *arg); extern int vmemmap_find_next_valid_pfn(int, int); #else static inline int vmemmap_find_next_valid_pfn(int node, int i) diff --git a/arch/ia64/include/asm/pal.h b/arch/ia64/include/asm/pal.h index 67b0290..6a29250 100644 --- a/arch/ia64/include/asm/pal.h +++ b/arch/ia64/include/asm/pal.h @@ -989,8 +989,8 @@ ia64_pal_cache_read (pal_cache_line_id_u_t line_id, u64 physical_addr) } /* Return summary information about the hierarchy of caches controlled by the processor */ -static inline s64 -ia64_pal_cache_summary (u64 *cache_levels, u64 *unique_caches) +static inline long ia64_pal_cache_summary(unsigned long *cache_levels, + unsigned long *unique_caches) { struct ia64_pal_retval iprv; PAL_CALL(iprv, PAL_CACHE_SUMMARY, 0, 0, 0); @@ -1038,8 +1038,8 @@ ia64_pal_copy_pal (u64 target_addr, u64 alloc_size, u64 processor, u64 *pal_proc } /* Return the number of instruction and data debug register pairs */ -static inline s64 -ia64_pal_debug_info (u64 *inst_regs, u64 *data_regs) +static inline long ia64_pal_debug_info(unsigned long *inst_regs, + unsigned long *data_regs) { struct ia64_pal_retval iprv; PAL_CALL(iprv, PAL_DEBUG_INFO, 0, 0, 0); @@ -1074,8 +1074,7 @@ ia64_pal_fixed_addr (u64 *global_unique_addr) } /* Get base frequency of the platform if generated by the processor */ -static inline s64 -ia64_pal_freq_base (u64 *platform_base_freq) +static inline long ia64_pal_freq_base(unsigned long *platform_base_freq) { struct ia64_pal_retval iprv; PAL_CALL(iprv, PAL_FREQ_BASE, 0, 0, 0); @@ -1437,7 +1436,7 @@ ia64_pal_proc_set_features (u64 feature_select) * possible. */ typedef struct ia64_ptce_info_s { - u64 base; + unsigned long base; u32 count[2]; u32 stride[2]; } ia64_ptce_info_t; @@ -1478,9 +1477,9 @@ ia64_pal_register_info (u64 info_request, u64 *reg_info_1, u64 *reg_info_2) } typedef union pal_hints_u { - u64 ph_data; + unsigned long ph_data; struct { - u64 si : 1, + unsigned long si : 1, li : 1, reserved : 62; } pal_hints_s; @@ -1489,8 +1488,8 @@ typedef union pal_hints_u { /* Return information about the register stack and RSE for this processor * implementation. */ -static inline s64 -ia64_pal_rse_info (u64 *num_phys_stacked, pal_hints_u_t *hints) +static inline long ia64_pal_rse_info(unsigned long *num_phys_stacked, + pal_hints_u_t *hints) { struct ia64_pal_retval iprv; PAL_CALL(iprv, PAL_RSE_INFO, 0, 0, 0); @@ -1608,8 +1607,7 @@ ia64_pal_vm_info (u64 tc_level, u64 tc_type, pal_tc_info_u_t *tc_info, u64 *tc_ /* Get page size information about the virtual memory characteristics of the processor * implementation. */ -static inline s64 -ia64_pal_vm_page_size (u64 *tr_pages, u64 *vw_pages) +static inline s64 ia64_pal_vm_page_size(u64 *tr_pages, u64 *vw_pages) { struct ia64_pal_retval iprv; PAL_CALL(iprv, PAL_VM_PAGE_SIZE, 0, 0, 0); diff --git a/arch/ia64/include/asm/processor.h b/arch/ia64/include/asm/processor.h index f88fa05..3eaeedf1 100644 --- a/arch/ia64/include/asm/processor.h +++ b/arch/ia64/include/asm/processor.h @@ -187,40 +187,40 @@ union ia64_rr { * state comes earlier: */ struct cpuinfo_ia64 { - __u32 softirq_pending; - __u64 itm_delta; /* # of clock cycles between clock ticks */ - __u64 itm_next; /* interval timer mask value to use for next clock tick */ - __u64 nsec_per_cyc; /* (1000000000<<IA64_NSEC_PER_CYC_SHIFT)/itc_freq */ - __u64 unimpl_va_mask; /* mask of unimplemented virtual address bits (from PAL) */ - __u64 unimpl_pa_mask; /* mask of unimplemented physical address bits (from PAL) */ - __u64 itc_freq; /* frequency of ITC counter */ - __u64 proc_freq; /* frequency of processor */ - __u64 cyc_per_usec; /* itc_freq/1000000 */ - __u64 ptce_base; - __u32 ptce_count[2]; - __u32 ptce_stride[2]; + unsigned int softirq_pending; + unsigned long itm_delta; /* # of clock cycles between clock ticks */ + unsigned long itm_next; /* interval timer mask value to use for next clock tick */ + unsigned long nsec_per_cyc; /* (1000000000<<IA64_NSEC_PER_CYC_SHIFT)/itc_freq */ + unsigned long unimpl_va_mask; /* mask of unimplemented virtual address bits (from PAL) */ + unsigned long unimpl_pa_mask; /* mask of unimplemented physical address bits (from PAL) */ + unsigned long itc_freq; /* frequency of ITC counter */ + unsigned long proc_freq; /* frequency of processor */ + unsigned long cyc_per_usec; /* itc_freq/1000000 */ + unsigned long ptce_base; + unsigned int ptce_count[2]; + unsigned int ptce_stride[2]; struct task_struct *ksoftirqd; /* kernel softirq daemon for this CPU */ #ifdef CONFIG_SMP - __u64 loops_per_jiffy; + unsigned long loops_per_jiffy; int cpu; - __u32 socket_id; /* physical processor socket id */ - __u16 core_id; /* core id */ - __u16 thread_id; /* thread id */ - __u16 num_log; /* Total number of logical processors on + unsigned int socket_id; /* physical processor socket id */ + unsigned short core_id; /* core id */ + unsigned short thread_id; /* thread id */ + unsigned short num_log; /* Total number of logical processors on * this socket that were successfully booted */ - __u8 cores_per_socket; /* Cores per processor socket */ - __u8 threads_per_core; /* Threads per core */ + unsigned char cores_per_socket; /* Cores per processor socket */ + unsigned char threads_per_core; /* Threads per core */ #endif /* CPUID-derived information: */ - __u64 ppn; - __u64 features; - __u8 number; - __u8 revision; - __u8 model; - __u8 family; - __u8 archrev; + unsigned long ppn; + unsigned long features; + unsigned char number; + unsigned char revision; + unsigned char model; + unsigned char family; + unsigned char archrev; char vendor[16]; char *model_name; @@ -329,8 +329,8 @@ struct thread_struct { #else # define INIT_THREAD_PM #endif - __u64 dbr[IA64_NUM_DBG_REGS]; - __u64 ibr[IA64_NUM_DBG_REGS]; + unsigned long dbr[IA64_NUM_DBG_REGS]; + unsigned long ibr[IA64_NUM_DBG_REGS]; struct ia64_fpreg fph[96]; /* saved/loaded on demand */ }; diff --git a/arch/ia64/include/asm/sal.h b/arch/ia64/include/asm/sal.h index 966797a..d19ddba 100644 --- a/arch/ia64/include/asm/sal.h +++ b/arch/ia64/include/asm/sal.h @@ -106,10 +106,10 @@ struct ia64_sal_retval { * informational value should be printed (e.g., "reboot for * change to take effect"). */ - s64 status; - u64 v0; - u64 v1; - u64 v2; + long status; + unsigned long v0; + unsigned long v1; + unsigned long v2; }; typedef struct ia64_sal_retval (*ia64_sal_handler) (u64, ...); diff --git a/arch/ia64/include/asm/sn/sn_sal.h b/arch/ia64/include/asm/sn/sn_sal.h index e310fc0..1f5ff47 100644 --- a/arch/ia64/include/asm/sn/sn_sal.h +++ b/arch/ia64/include/asm/sn/sn_sal.h @@ -929,7 +929,7 @@ ia64_sn_sysctl_tio_clock_reset(nasid_t nasid) /* * Get the associated ioboard type for a given nasid. */ -static inline s64 +static inline long ia64_sn_sysctl_ioboard_get(nasid_t nasid, u16 *ioboard) { struct ia64_sal_retval isrv; diff --git a/arch/ia64/include/asm/types.h b/arch/ia64/include/asm/types.h index fbf1ed3..bcd260e 100644 --- a/arch/ia64/include/asm/types.h +++ b/arch/ia64/include/asm/types.h @@ -2,10 +2,11 @@ #define _ASM_IA64_TYPES_H /* - * This file is never included by application software unless explicitly requested (e.g., - * via linux/types.h) in which case the application is Linux specific so (user-) name - * space pollution is not a major issue. However, for interoperability, libraries still - * need to be careful to avoid a name clashes. + * This file is never included by application software unless explicitly + * requested (e.g., via linux/types.h) in which case the application is + * Linux specific so (user-) name space pollution is not a major issue. + * However, for interoperability, libraries still need to be careful to + * avoid naming clashes. * * Based on <asm-alpha/types.h>. * @@ -13,7 +14,11 @@ * David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co */ +#ifdef __KERNEL__ +#include <asm-generic/int-ll64.h> +#else #include <asm-generic/int-l64.h> +#endif #ifdef __ASSEMBLY__ # define __IA64_UL(x) (x) diff --git a/arch/ia64/kernel/efi.c b/arch/ia64/kernel/efi.c index 7ef80e8..c745d0a 100644 --- a/arch/ia64/kernel/efi.c +++ b/arch/ia64/kernel/efi.c @@ -46,7 +46,7 @@ extern efi_status_t efi_call_phys (void *, ...); struct efi efi; EXPORT_SYMBOL(efi); static efi_runtime_services_t *runtime; -static unsigned long mem_limit = ~0UL, max_addr = ~0UL, min_addr = 0UL; +static u64 mem_limit = ~0UL, max_addr = ~0UL, min_addr = 0UL; #define efi_call_virt(f, args...) (*(f))(args) @@ -356,7 +356,7 @@ efi_get_pal_addr (void) if (++pal_code_count > 1) { printk(KERN_ERR "Too many EFI Pal Code memory ranges, " - "dropped @ %lx\n", md->phys_addr); + "dropped @ %llx\n", md->phys_addr); continue; } /* @@ -490,10 +490,10 @@ efi_init (void) } } if (min_addr != 0UL) - printk(KERN_INFO "Ignoring memory below %luMB\n", + printk(KERN_INFO "Ignoring memory below %lluMB\n", min_addr >> 20); if (max_addr != ~0UL) - printk(KERN_INFO "Ignoring memory above %luMB\n", + printk(KERN_INFO "Ignoring memory above %lluMB\n", max_addr >> 20); efi.systab = __va(ia64_boot_param->efi_systab); @@ -1066,7 +1066,7 @@ find_memmap_space (void) * parts exist, and are WB. */ unsigned long -efi_memmap_init(unsigned long *s, unsigned long *e) +efi_memmap_init(u64 *s, u64 *e) { struct kern_memdesc *k, *prev = NULL; u64 contig_low=0, contig_high=0; diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c index 1cce4ce..c259b94 100644 --- a/arch/ia64/kernel/mca.c +++ b/arch/ia64/kernel/mca.c @@ -850,7 +850,7 @@ EXPORT_SYMBOL(ia64_unreg_MCA_extension); static inline void -copy_reg(const u64 *fr, u64 fnat, u64 *tr, u64 *tnat) +copy_reg(const u64 *fr, u64 fnat, unsigned long *tr, unsigned long *tnat) { u64 fslot, tslot, nat; *tr = *fr; @@ -914,9 +914,9 @@ ia64_mca_modify_original_stack(struct pt_regs *regs, struct switch_stack *old_sw; unsigned size = sizeof(struct pt_regs) + sizeof(struct switch_stack) + 16; - u64 *old_bspstore, *old_bsp; - u64 *new_bspstore, *new_bsp; - u64 old_unat, old_rnat, new_rnat, nat; + unsigned long *old_bspstore, *old_bsp; + unsigned long *new_bspstore, *new_bsp; + unsigned long old_unat, old_rnat, new_rnat, nat; u64 slots, loadrs = regs->loadrs; u64 r12 = ms->pmsa_gr[12-1], r13 = ms->pmsa_gr[13-1]; u64 ar_bspstore = regs->ar_bspstore; @@ -968,10 +968,10 @@ ia64_mca_modify_original_stack(struct pt_regs *regs, * loadrs for the new stack and save it in the new pt_regs, where * ia64_old_stack() can get it. */ - old_bspstore = (u64 *)ar_bspstore; - old_bsp = (u64 *)ar_bsp; + old_bspstore = (unsigned long *)ar_bspstore; + old_bsp = (unsigned long *)ar_bsp; slots = ia64_rse_num_regs(old_bspstore, old_bsp); - new_bspstore = (u64 *)((u64)current + IA64_RBS_OFFSET); + new_bspstore = (unsigned long *)((u64)current + IA64_RBS_OFFSET); new_bsp = ia64_rse_skip_regs(new_bspstore, slots); regs->loadrs = (new_bsp - new_bspstore) * 8 << 16; @@ -1918,9 +1918,9 @@ ia64_mca_init(void) ia64_fptr_t *init_hldlr_ptr_slave = (ia64_fptr_t *)ia64_os_init_dispatch_slave; ia64_fptr_t *mca_hldlr_ptr = (ia64_fptr_t *)ia64_os_mca_dispatch; int i; - s64 rc; + long rc; struct ia64_sal_retval isrv; - u64 timeout = IA64_MCA_RENDEZ_TIMEOUT; /* platform specific */ + unsigned long timeout = IA64_MCA_RENDEZ_TIMEOUT; /* platform specific */ static struct notifier_block default_init_monarch_nb = { .notifier_call = default_monarch_init_process, .priority = 0/* we need to notified last */ diff --git a/arch/ia64/kernel/module.c b/arch/ia64/kernel/module.c index da3b0cf..1481b0a 100644 --- a/arch/ia64/kernel/module.c +++ b/arch/ia64/kernel/module.c @@ -171,7 +171,8 @@ apply_imm60 (struct module *mod, struct insn *insn, uint64_t val) return 0; } if (val + ((uint64_t) 1 << 59) >= (1UL << 60)) { - printk(KERN_ERR "%s: value %ld out of IMM60 range\n", mod->name, (int64_t) val); + printk(KERN_ERR "%s: value %ld out of IMM60 range\n", + mod->name, (long) val); return 0; } ia64_patch_imm60((u64) insn, val); @@ -182,7 +183,8 @@ static int apply_imm22 (struct module *mod, struct insn *insn, uint64_t val) { if (val + (1 << 21) >= (1 << 22)) { - printk(KERN_ERR "%s: value %li out of IMM22 range\n", mod->name, (int64_t)val); + printk(KERN_ERR "%s: value %li out of IMM22 range\n", + mod->name, (long)val); return 0; } ia64_patch((u64) insn, 0x01fffcfe000UL, ( ((val & 0x200000UL) << 15) /* bit 21 -> 36 */ @@ -196,7 +198,8 @@ static int apply_imm21b (struct module *mod, struct insn *insn, uint64_t val) { if (val + (1 << 20) >= (1 << 21)) { - printk(KERN_ERR "%s: value %li out of IMM21b range\n", mod->name, (int64_t)val); + printk(KERN_ERR "%s: value %li out of IMM21b range\n", + mod->name, (long)val); return 0; } ia64_patch((u64) insn, 0x11ffffe000UL, ( ((val & 0x100000UL) << 16) /* bit 20 -> 36 */ @@ -701,8 +704,9 @@ do_reloc (struct module *mod, uint8_t r_type, Elf64_Sym *sym, uint64_t addend, case RV_PCREL2: if (r_type == R_IA64_PCREL21BI) { if (!is_internal(mod, val)) { - printk(KERN_ERR "%s: %s reloc against non-local symbol (%lx)\n", - __func__, reloc_name[r_type], val); + printk(KERN_ERR "%s: %s reloc against " + "non-local symbol (%lx)\n", __func__, + reloc_name[r_type], (unsigned long)val); return -ENOEXEC; } format = RF_INSN21B; diff --git a/arch/ia64/kernel/palinfo.c b/arch/ia64/kernel/palinfo.c index a4f19c7..fdf6f9d 100644 --- a/arch/ia64/kernel/palinfo.c +++ b/arch/ia64/kernel/palinfo.c @@ -218,10 +218,10 @@ static int cache_info(char *page) { char *p = page; - u64 i, levels, unique_caches; + unsigned long i, levels, unique_caches; pal_cache_config_info_t cci; int j, k; - s64 status; + long status; if ((status = ia64_pal_cache_summary(&levels, &unique_caches)) != 0) { printk(KERN_ERR "ia64_pal_cache_summary=%ld\n", status); @@ -303,7 +303,7 @@ vm_info(char *page) ia64_ptce_info_t ptce; const char *sep; int i, j; - s64 status; + long status; if ((status = ia64_pal_vm_summary(&vm_info_1, &vm_info_2)) !=0) { printk(KERN_ERR "ia64_pal_vm_summary=%ld\n", status); @@ -431,9 +431,9 @@ register_info(char *page) char *p = page; u64 reg_info[2]; u64 info; - u64 phys_stacked; + unsigned long phys_stacked; pal_hints_u_t hints; - u64 iregs, dregs; + unsigned long iregs, dregs; char *info_type[]={ "Implemented AR(s)", "AR(s) with read side-effects", @@ -530,8 +530,8 @@ static char **proc_features[]={ NULL, NULL, NULL, NULL, }; -static char * -feature_set_info(char *page, u64 avail, u64 status, u64 control, u64 set) +static char * feature_set_info(char *page, u64 avail, u64 status, u64 control, + unsigned long set) { char *p = page; char **vf, **v; @@ -714,7 +714,7 @@ frequency_info(char *page) { char *p = page; struct pal_freq_ratio proc, itc, bus; - u64 base; + unsigned long base; if (ia64_pal_freq_base(&base) == -1) p += sprintf(p, "Output clock : not implemented\n"); @@ -736,43 +736,43 @@ static int tr_info(char *page) { char *p = page; - s64 status; + long status; pal_tr_valid_u_t tr_valid; u64 tr_buffer[4]; pal_vm_info_1_u_t vm_info_1; pal_vm_info_2_u_t vm_info_2; - u64 i, j; - u64 max[3], pgm; + unsigned long i, j; + unsigned long max[3], pgm; struct ifa_reg { - u64 valid:1; - u64 ig:11; - u64 vpn:52; + unsigned long valid:1; + unsigned long ig:11; + unsigned long vpn:52; } *ifa_reg; struct itir_reg { - u64 rv1:2; - u64 ps:6; - u64 key:24; - u64 rv2:32; + unsigned long rv1:2; + unsigned long ps:6; + unsigned long key:24; + unsigned long rv2:32; } *itir_reg; struct gr_reg { - u64 p:1; - u64 rv1:1; - u64 ma:3; - u64 a:1; - u64 d:1; - u64 pl:2; - u64 ar:3; - u64 ppn:38; - u64 rv2:2; - u64 ed:1; - u64 ig:11; + unsigned long p:1; + unsigned long rv1:1; + unsigned long ma:3; + unsigned long a:1; + unsigned long d:1; + unsigned long pl:2; + unsigned long ar:3; + unsigned long ppn:38; + unsigned long rv2:2; + unsigned long ed:1; + unsigned long ig:11; } *gr_reg; struct rid_reg { - u64 ig1:1; - u64 rv1:1; - u64 ig2:6; - u64 rid:24; - u64 rv2:32; + unsigned long ig1:1; + unsigned long rv1:1; + unsigned long ig2:6; + unsigned long rid:24; + unsigned long rv2:32; } *rid_reg; if ((status = ia64_pal_vm_summary(&vm_info_1, &vm_info_2)) !=0) { diff --git a/arch/ia64/kernel/pci-dma.c b/arch/ia64/kernel/pci-dma.c index eb98738..1376da4 100644 --- a/arch/ia64/kernel/pci-dma.c +++ b/arch/ia64/kernel/pci-dma.c @@ -91,7 +91,7 @@ int iommu_dma_supported(struct device *dev, u64 mask) type. Normally this doesn't make any difference, but gives more gentle handling of IOMMU overflow. */ if (iommu_sac_force && (mask >= DMA_BIT_MASK(40))) { - dev_info(dev, "Force SAC with mask %lx\n", mask); + dev_info(dev, "Force SAC with mask %llx\n", mask); return 0; } diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c index 8a06dc48..89ad0bb 100644 --- a/arch/ia64/kernel/perfmon.c +++ b/arch/ia64/kernel/perfmon.c @@ -312,7 +312,7 @@ typedef struct pfm_context { unsigned long th_pmcs[PFM_NUM_PMC_REGS]; /* PMC thread save state */ unsigned long th_pmds[PFM_NUM_PMD_REGS]; /* PMD thread save state */ - u64 ctx_saved_psr_up; /* only contains psr.up value */ + unsigned long ctx_saved_psr_up; /* only contains psr.up value */ unsigned long ctx_last_activation; /* context last activation number for last_cpu */ unsigned int ctx_last_cpu; /* CPU id of current or last CPU used (SMP only) */ @@ -5213,8 +5213,8 @@ pfm_end_notify_user(pfm_context_t *ctx) * main overflow processing routine. * it can be called from the interrupt path or explicitly during the context switch code */ -static void -pfm_overflow_handler(struct task_struct *task, pfm_context_t *ctx, u64 pmc0, struct pt_regs *regs) +static void pfm_overflow_handler(struct task_struct *task, pfm_context_t *ctx, + unsigned long pmc0, struct pt_regs *regs) { pfm_ovfl_arg_t *ovfl_arg; unsigned long mask; diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index 714066a..1b23ec12 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -151,9 +151,9 @@ int num_rsvd_regions __initdata; * This routine does not assume the incoming segments are sorted. */ int __init -filter_rsvd_memory (unsigned long start, unsigned long end, void *arg) +filter_rsvd_memory (u64 start, u64 end, void *arg) { - unsigned long range_start, range_end, prev_start; + u64 range_start, range_end, prev_start; void (*func)(unsigned long, unsigned long, int); int i; @@ -191,7 +191,7 @@ filter_rsvd_memory (unsigned long start, unsigned long end, void *arg) * are not filtered out. */ int __init -filter_memory(unsigned long start, unsigned long end, void *arg) +filter_memory(u64 start, u64 end, void *arg) { void (*func)(unsigned long, unsigned long, int); @@ -397,7 +397,7 @@ find_initrd (void) initrd_start = (unsigned long)__va(ia64_boot_param->initrd_start); initrd_end = initrd_start+ia64_boot_param->initrd_size; - printk(KERN_INFO "Initial ramdisk at: 0x%lx (%lu bytes)\n", + printk(KERN_INFO "Initial ramdisk at: 0x%lx (%llu bytes)\n", initrd_start, ia64_boot_param->initrd_size); } #endif @@ -505,9 +505,9 @@ static int __init parse_elfcorehdr(char *arg) } early_param("elfcorehdr", parse_elfcorehdr); -int __init reserve_elfcorehdr(unsigned long *start, unsigned long *end) +int __init reserve_elfcorehdr(u64 *start, u64 *end) { - unsigned long length; + u64 length; /* We get the address using the kernel command line, * but the size is extracted from the EFI tables. @@ -588,7 +588,7 @@ setup_arch (char **cmdline_p) ia64_patch_rse((u64) __start___rse_patchlist, (u64) __end___rse_patchlist); #else { - u64 num_phys_stacked; + unsigned long num_phys_stacked; if (ia64_pal_rse_info(&num_phys_stacked, 0) == 0 && num_phys_stacked > 96) ia64_patch_rse((u64) __start___rse_patchlist, (u64) __end___rse_patchlist); @@ -872,9 +872,9 @@ static void __cpuinit get_cache_info(void) { unsigned long line_size, max = 1; - u64 l, levels, unique_caches; - pal_cache_config_info_t cci; - s64 status; + unsigned long l, levels, unique_caches; + pal_cache_config_info_t cci; + long status; status = ia64_pal_cache_summary(&levels, &unique_caches); if (status != 0) { @@ -892,9 +892,9 @@ get_cache_info(void) /* cache_type (data_or_unified)=2 */ status = ia64_pal_cache_config_info(l, 2, &cci); if (status != 0) { - printk(KERN_ERR - "%s: ia64_pal_cache_config_info(l=%lu, 2) failed (status=%ld)\n", - __func__, l, status); + printk(KERN_ERR "%s: ia64_pal_cache_config_info" + "(l=%lu, 2) failed (status=%ld)\n", + __func__, l, status); max = SMP_CACHE_BYTES; /* The safest setup for "flush_icache_range()" */ cci.pcci_stride = I_CACHE_STRIDE_SHIFT; @@ -914,10 +914,10 @@ get_cache_info(void) /* cache_type (instruction)=1*/ status = ia64_pal_cache_config_info(l, 1, &cci); if (status != 0) { - printk(KERN_ERR - "%s: ia64_pal_cache_config_info(l=%lu, 1) failed (status=%ld)\n", + printk(KERN_ERR "%s: ia64_pal_cache_config_info" + "(l=%lu, 1) failed (status=%ld)\n", __func__, l, status); - /* The safest setup for "flush_icache_range()" */ + /* The safest setup for flush_icache_range() */ cci.pcci_stride = I_CACHE_STRIDE_SHIFT; } } diff --git a/arch/ia64/kernel/smp.c b/arch/ia64/kernel/smp.c index 5230eaa..f0c521b 100644 --- a/arch/ia64/kernel/smp.c +++ b/arch/ia64/kernel/smp.c @@ -66,7 +66,7 @@ static DEFINE_PER_CPU(unsigned short, shadow_flush_counts[NR_CPUS]) ____cachelin #define IPI_KDUMP_CPU_STOP 3 /* This needs to be cacheline aligned because it is written to by *other* CPUs. */ -static DEFINE_PER_CPU_SHARED_ALIGNED(u64, ipi_operation); +static DEFINE_PER_CPU_SHARED_ALIGNED(unsigned long, ipi_operation); extern void cpu_halt (void); diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c index 2a70af4..de100aa 100644 --- a/arch/ia64/kernel/smpboot.c +++ b/arch/ia64/kernel/smpboot.c @@ -865,7 +865,7 @@ init_smp_config(void) void __devinit identify_siblings(struct cpuinfo_ia64 *c) { - s64 status; + long status; u16 pltid; pal_logical_to_physical_t info; diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c index 604c1a3..4990495 100644 --- a/arch/ia64/kernel/time.c +++ b/arch/ia64/kernel/time.c @@ -385,7 +385,7 @@ ia64_init_itm (void) static cycle_t itc_get_cycles(struct clocksource *cs) { - u64 lcycle, now, ret; + unsigned long lcycle, now, ret; if (!itc_jitter_data.itc_jitter) return get_cycles(); diff --git a/arch/ia64/kernel/topology.c b/arch/ia64/kernel/topology.c index a8d61a3..bc80dff 100644 --- a/arch/ia64/kernel/topology.c +++ b/arch/ia64/kernel/topology.c @@ -306,10 +306,10 @@ static void __cpuinit cpu_cache_sysfs_exit(unsigned int cpu) static int __cpuinit cpu_cache_sysfs_init(unsigned int cpu) { - u64 i, levels, unique_caches; + unsigned long i, levels, unique_caches; pal_cache_config_info_t cci; int j; - s64 status; + long status; struct cache_info *this_cache; int num_cache_leaves = 0; diff --git a/arch/ia64/kernel/uncached.c b/arch/ia64/kernel/uncached.c index 8eff8c1..e6ac3c3 100644 --- a/arch/ia64/kernel/uncached.c +++ b/arch/ia64/kernel/uncached.c @@ -249,8 +249,7 @@ EXPORT_SYMBOL(uncached_free_page); * Called at boot time to build a map of pages that can be used for * memory special operations. */ -static int __init uncached_build_memmap(unsigned long uc_start, - unsigned long uc_end, void *arg) +static int __init uncached_build_memmap(u64 uc_start, u64 uc_end, void *arg) { int nid = paddr_to_nid(uc_start - __IA64_UNCACHED_OFFSET); struct gen_pool *pool = uncached_pools[nid].pool; diff --git a/arch/ia64/mm/contig.c b/arch/ia64/mm/contig.c index 0ee085e..2f724d2 100644 --- a/arch/ia64/mm/contig.c +++ b/arch/ia64/mm/contig.c @@ -107,10 +107,10 @@ unsigned long bootmap_start; * bootmap_start. This address must be page-aligned. */ static int __init -find_bootmap_location (unsigned long start, unsigned long end, void *arg) +find_bootmap_location (u64 start, u64 end, void *arg) { - unsigned long needed = *(unsigned long *)arg; - unsigned long range_start, range_end, free_start; + u64 needed = *(unsigned long *)arg; + u64 range_start, range_end, free_start; int i; #if IGNORE_PFN0 @@ -229,8 +229,7 @@ find_memory (void) alloc_per_cpu_data(); } -static int -count_pages (u64 start, u64 end, void *arg) +static int count_pages(u64 start, u64 end, void *arg) { unsigned long *count = arg; diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c index c0f3bee..b115b3b 100644 --- a/arch/ia64/mm/init.c +++ b/arch/ia64/mm/init.c @@ -422,8 +422,7 @@ retry_pte: return hole_next_pfn - pgdat->node_start_pfn; } -int __init -create_mem_map_page_table (u64 start, u64 end, void *arg) +int __init create_mem_map_page_table(u64 start, u64 end, void *arg) { unsigned long address, start_page, end_page; struct page *map_start, *map_end; @@ -469,7 +468,7 @@ struct memmap_init_callback_data { }; static int __meminit -virtual_memmap_init (u64 start, u64 end, void *arg) +virtual_memmap_init(u64 start, u64 end, void *arg) { struct memmap_init_callback_data *args; struct page *map_start, *map_end; @@ -531,8 +530,7 @@ ia64_pfn_valid (unsigned long pfn) } EXPORT_SYMBOL(ia64_pfn_valid); -int __init -find_largest_hole (u64 start, u64 end, void *arg) +int __init find_largest_hole(u64 start, u64 end, void *arg) { u64 *max_gap = arg; @@ -548,8 +546,7 @@ find_largest_hole (u64 start, u64 end, void *arg) #endif /* CONFIG_VIRTUAL_MEM_MAP */ -int __init -register_active_ranges(u64 start, u64 len, int nid) +int __init register_active_ranges(u64 start, u64 len, int nid) { u64 end = start + len; @@ -567,7 +564,7 @@ register_active_ranges(u64 start, u64 len, int nid) } static int __init -count_reserved_pages (u64 start, u64 end, void *arg) +count_reserved_pages(u64 start, u64 end, void *arg) { unsigned long num_reserved = 0; unsigned long *count = arg; @@ -580,7 +577,7 @@ count_reserved_pages (u64 start, u64 end, void *arg) } int -find_max_min_low_pfn (unsigned long start, unsigned long end, void *arg) +find_max_min_low_pfn (u64 start, u64 end, void *arg) { unsigned long pfn_start, pfn_end; #ifdef CONFIG_FLATMEM diff --git a/arch/ia64/mm/tlb.c b/arch/ia64/mm/tlb.c index b9f3d7b..f426dc7 100644 --- a/arch/ia64/mm/tlb.c +++ b/arch/ia64/mm/tlb.c @@ -34,7 +34,7 @@ #include <asm/tlb.h> static struct { - unsigned long mask; /* mask of supported purge page-sizes */ + u64 mask; /* mask of supported purge page-sizes */ unsigned long max_bits; /* log2 of largest supported purge page-size */ } purge; @@ -328,7 +328,7 @@ void __devinit ia64_tlb_init (void) { ia64_ptce_info_t uninitialized_var(ptce_info); /* GCC be quiet */ - unsigned long tr_pgbits; + u64 tr_pgbits; long status; pal_vm_info_1_u_t vm_info_1; pal_vm_info_2_u_t vm_info_2; diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c index 61f1af5..e643373 100644 --- a/arch/ia64/pci/pci.c +++ b/arch/ia64/pci/pci.c @@ -163,7 +163,7 @@ add_io_space (struct pci_root_info *info, struct acpi_resource_address64 *addr) { struct resource *resource; char *name; - u64 base, min, max, base_port; + unsigned long base, min, max, base_port; unsigned int sparse = 0, space_nr, len; resource = kzalloc(sizeof(*resource), GFP_KERNEL); @@ -292,7 +292,7 @@ static __devinit acpi_status add_window(struct acpi_resource *res, void *data) window->offset = offset; if (insert_resource(root, &window->resource)) { - printk(KERN_ERR "alloc 0x%lx-0x%lx from %s for %s failed\n", + printk(KERN_ERR "alloc 0x%llx-0x%llx from %s for %s failed\n", window->resource.start, window->resource.end, root->name, info->name); } @@ -314,8 +314,8 @@ pcibios_setup_root_windows(struct pci_bus *bus, struct pci_controller *ctrl) (res->end - res->start < 16)) continue; if (j >= PCI_BUS_NUM_RESOURCES) { - printk("Ignoring range [%lx-%lx] (%lx)\n", res->start, - res->end, res->flags); + printk("Ignoring range [%#llx-%#llx] (%lx)\n", + res->start, res->end, res->flags); continue; } bus->resource[j++] = res; @@ -728,8 +728,8 @@ extern u8 pci_cache_line_size; */ static void __init set_pci_cacheline_size(void) { - u64 levels, unique_caches; - s64 status; + unsigned long levels, unique_caches; + long status; pal_cache_config_info_t cci; status = ia64_pal_cache_summary(&levels, &unique_caches); diff --git a/arch/ia64/sn/kernel/io_acpi_init.c b/arch/ia64/sn/kernel/io_acpi_init.c index d0223ab..fd50ff9 100644 --- a/arch/ia64/sn/kernel/io_acpi_init.c +++ b/arch/ia64/sn/kernel/io_acpi_init.c @@ -40,7 +40,7 @@ struct sn_pcidev_match { /* * Perform the early IO init in PROM. */ -static s64 +static long sal_ioif_init(u64 *result) { struct ia64_sal_retval isrv = {0,0,0,0}; @@ -492,7 +492,7 @@ void __init sn_io_acpi_init(void) { u64 result; - s64 status; + long status; /* SN Altix does not follow the IOSAPIC IRQ routing model */ acpi_irq_model = ACPI_IRQ_MODEL_PLATFORM; diff --git a/arch/ia64/sn/kernel/io_common.c b/arch/ia64/sn/kernel/io_common.c index 57f280d..76645cf 100644 --- a/arch/ia64/sn/kernel/io_common.c +++ b/arch/ia64/sn/kernel/io_common.c @@ -342,7 +342,7 @@ sn_common_bus_fixup(struct pci_bus *bus, struct pcibus_bussoft *b = SN_PCIBUS_BUSSOFT(bus); printk(KERN_WARNING "Device ASIC=%u XID=%u PBUSNUM=%u " - "L_IO=%lx L_MEM=%lx BASE=%lx\n", + "L_IO=%llx L_MEM=%llx BASE=%llx\n", b->bs_asic_type, b->bs_xid, b->bs_persist_busnum, b->bs_legacy_io, b->bs_legacy_mem, b->bs_base); printk(KERN_WARNING "on node %d but only %d nodes online." diff --git a/arch/ia64/sn/kernel/sn2/sn_hwperf.c b/arch/ia64/sn/kernel/sn2/sn_hwperf.c index 9e6491c..4c7e747 100644 --- a/arch/ia64/sn/kernel/sn2/sn_hwperf.c +++ b/arch/ia64/sn/kernel/sn2/sn_hwperf.c @@ -414,7 +414,7 @@ static int sn_topology_show(struct seq_file *s, void *d) } seq_printf(s, "partition %u %s local " "shubtype %s, " - "nasid_mask 0x%016lx, " + "nasid_mask 0x%016llx, " "nasid_bits %d:%d, " "system_size %d, " "sharing_size %d, " @@ -683,7 +683,7 @@ static int sn_hwperf_map_err(int hwperf_err) * ioctl for "sn_hwperf" misc device */ static int -sn_hwperf_ioctl(struct inode *in, struct file *fp, u32 op, u64 arg) +sn_hwperf_ioctl(struct inode *in, struct file *fp, u32 op, unsigned long arg) { struct sn_hwperf_ioctl_args a; struct cpuinfo_ia64 *cdata; diff --git a/arch/ia64/sn/kernel/sn2/sn_proc_fs.c b/arch/ia64/sn/kernel/sn2/sn_proc_fs.c index 2526e5c..c76d8dc 100644 --- a/arch/ia64/sn/kernel/sn2/sn_proc_fs.c +++ b/arch/ia64/sn/kernel/sn2/sn_proc_fs.c @@ -36,7 +36,7 @@ static int system_serial_number_open(struct inode *inode, struct file *file) static int licenseID_show(struct seq_file *s, void *p) { - seq_printf(s, "0x%lx\n", sn_partition_serial_number_val()); + seq_printf(s, "0x%llx\n", sn_partition_serial_number_val()); return 0; } diff --git a/arch/ia64/sn/kernel/tiocx.c b/arch/ia64/sn/kernel/tiocx.c index 3f86423..c1bd1cf 100644 --- a/arch/ia64/sn/kernel/tiocx.c +++ b/arch/ia64/sn/kernel/tiocx.c @@ -368,7 +368,7 @@ static void tio_corelet_reset(nasid_t nasid, int corelet) static int is_fpga_tio(int nasid, int *bt) { u16 uninitialized_var(ioboard_type); /* GCC be quiet */ - s64 rc; + long rc; rc = ia64_sn_sysctl_ioboard_get(nasid, &ioboard_type); if (rc) { diff --git a/arch/ia64/sn/pci/pcibr/pcibr_provider.c b/arch/ia64/sn/pci/pcibr/pcibr_provider.c index 2c676cc..d13e5a2 100644 --- a/arch/ia64/sn/pci/pcibr/pcibr_provider.c +++ b/arch/ia64/sn/pci/pcibr/pcibr_provider.c @@ -79,7 +79,7 @@ static int sal_pcibr_error_interrupt(struct pcibus_info *soft) u16 sn_ioboard_to_pci_bus(struct pci_bus *pci_bus) { - s64 rc; + long rc; u16 uninitialized_var(ioboard); /* GCC be quiet */ nasid_t nasid = NASID_GET(SN_PCIBUS_BUSSOFT(pci_bus)->bs_base); diff --git a/arch/ia64/sn/pci/tioca_provider.c b/arch/ia64/sn/pci/tioca_provider.c index 79165122..35b2a27 100644 --- a/arch/ia64/sn/pci/tioca_provider.c +++ b/arch/ia64/sn/pci/tioca_provider.c @@ -123,7 +123,7 @@ tioca_gart_init(struct tioca_kernel *tioca_kern) if (!tmp) { printk(KERN_ERR "%s: Could not allocate " - "%lu bytes (order %d) for GART\n", + "%llu bytes (order %d) for GART\n", __func__, tioca_kern->ca_gart_size, get_order(tioca_kern->ca_gart_size)); @@ -348,7 +348,7 @@ tioca_dma_d48(struct pci_dev *pdev, u64 paddr) agp_dma_extn = __sn_readq_relaxed(&ca_base->ca_agp_dma_addr_extn); if (node_upper != (agp_dma_extn >> CA_AGP_DMA_NODE_ID_SHFT)) { printk(KERN_ERR "%s: coretalk upper node (%u) " - "mismatch with ca_agp_dma_addr_extn (%lu)\n", + "mismatch with ca_agp_dma_addr_extn (%llu)\n", __func__, node_upper, (agp_dma_extn >> CA_AGP_DMA_NODE_ID_SHFT)); return 0; @@ -367,7 +367,7 @@ tioca_dma_d48(struct pci_dev *pdev, u64 paddr) * dma_addr_t is guaranteed to be contiguous in CA bus space. */ static dma_addr_t -tioca_dma_mapped(struct pci_dev *pdev, u64 paddr, size_t req_size) +tioca_dma_mapped(struct pci_dev *pdev, unsigned long paddr, size_t req_size) { int i, ps, ps_shift, entry, entries, mapsize, last_entry; u64 xio_addr, end_xio_addr; diff --git a/arch/ia64/sn/pci/tioce_provider.c b/arch/ia64/sn/pci/tioce_provider.c index 94e5845..012f3b8 100644 --- a/arch/ia64/sn/pci/tioce_provider.c +++ b/arch/ia64/sn/pci/tioce_provider.c @@ -493,7 +493,7 @@ tioce_dma_unmap(struct pci_dev *pdev, dma_addr_t bus_addr, int dir) if (&map->ce_dmamap_list == &ce_kern->ce_dmamap_list) { printk(KERN_WARNING - "%s: %s - no map found for bus_addr 0x%lx\n", + "%s: %s - no map found for bus_addr 0x%llx\n", __func__, pci_name(pdev), bus_addr); } else if (--map->refcnt == 0) { for (i = 0; i < map->ate_count; i++) { @@ -642,7 +642,7 @@ dma_map_done: * in the address. */ static u64 -tioce_dma(struct pci_dev *pdev, u64 paddr, size_t byte_count, int dma_flags) +tioce_dma(struct pci_dev *pdev, unsigned long paddr, size_t byte_count, int dma_flags) { return tioce_do_dma_map(pdev, paddr, byte_count, 0, dma_flags); } @@ -657,7 +657,7 @@ tioce_dma(struct pci_dev *pdev, u64 paddr, size_t byte_count, int dma_flags) * in the address. */ static u64 -tioce_dma_consistent(struct pci_dev *pdev, u64 paddr, size_t byte_count, int dma_flags) +tioce_dma_consistent(struct pci_dev *pdev, unsigned long paddr, size_t byte_count, int dma_flags) { return tioce_do_dma_map(pdev, paddr, byte_count, 1, dma_flags); } -- cgit v1.1 From 8fa62ad9d24e24707164ac7a97cbe59fe78a8591 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput <jaswinder@kernel.org> Date: Wed, 17 Jun 2009 14:11:10 +0530 Subject: x86: msr.h linux/types.h is only required for __KERNEL__ <linux/types.h> is only required for __KERNEL__ as whole file is covered with it Also fixed some spacing issues for usr/include/asm-x86/msr.h Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Cc: "H. Peter Anvin" <hpa@kernel.org> LKML-Reference: <1245228070.2662.1.camel@ht.satnam> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/include/asm/msr.h | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/msr.h b/arch/x86/include/asm/msr.h index 2260376..48ad9d2 100644 --- a/arch/x86/include/asm/msr.h +++ b/arch/x86/include/asm/msr.h @@ -3,13 +3,10 @@ #include <asm/msr-index.h> -#ifndef __ASSEMBLY__ -# include <linux/types.h> -#endif - #ifdef __KERNEL__ #ifndef __ASSEMBLY__ +#include <linux/types.h> #include <asm/asm.h> #include <asm/errno.h> #include <asm/cpumask.h> @@ -264,6 +261,4 @@ static inline int wrmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h) #endif /* CONFIG_SMP */ #endif /* __ASSEMBLY__ */ #endif /* __KERNEL__ */ - - #endif /* _ASM_X86_MSR_H */ -- cgit v1.1 From 8653f88ff93ba6bd6df4bac48908d41ad09dba7e Mon Sep 17 00:00:00 2001 From: Huang Weiyi <weiyi.huang@gmail.com> Date: Sat, 13 Jun 2009 20:21:26 +0800 Subject: x86: Remove duplicated #include's Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> LKML-Reference: <1244895686-2348-1-git-send-email-weiyi.huang@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/kernel/apic/probe_32.c | 11 ----------- arch/x86/kernel/apic/summit_32.c | 1 - 2 files changed, 12 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/probe_32.c b/arch/x86/kernel/apic/probe_32.c index 440a8bc..0c0182c 100644 --- a/arch/x86/kernel/apic/probe_32.c +++ b/arch/x86/kernel/apic/probe_32.c @@ -20,23 +20,12 @@ #include <asm/apic.h> #include <asm/setup.h> -#include <linux/threads.h> -#include <linux/cpumask.h> -#include <asm/mpspec.h> -#include <asm/fixmap.h> -#include <asm/apicdef.h> -#include <linux/kernel.h> -#include <linux/string.h> #include <linux/smp.h> -#include <linux/init.h> #include <asm/ipi.h> -#include <linux/smp.h> -#include <linux/init.h> #include <linux/interrupt.h> #include <asm/acpi.h> #include <asm/e820.h> -#include <asm/setup.h> #ifdef CONFIG_HOTPLUG_CPU #define DEFAULT_SEND_IPI (1) diff --git a/arch/x86/kernel/apic/summit_32.c b/arch/x86/kernel/apic/summit_32.c index 344eee4..eafdfbd1 100644 --- a/arch/x86/kernel/apic/summit_32.c +++ b/arch/x86/kernel/apic/summit_32.c @@ -44,7 +44,6 @@ #include <asm/ipi.h> #include <linux/kernel.h> #include <linux/string.h> -#include <linux/init.h> #include <linux/gfp.h> #include <linux/smp.h> -- cgit v1.1 From 60f916dee612130c9977a8edd4abee98334202ba Mon Sep 17 00:00:00 2001 From: Peter Zijlstra <a.p.zijlstra@chello.nl> Date: Mon, 15 Jun 2009 19:00:20 +0200 Subject: perf_counter: x86: Set the period in the intel overflow handler Commit 9e350de37ac960 ("perf_counter: Accurate period data") missed a spot, which caused all Intel-PMU samples to have a period of 0. This broke auto-freq sampling. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/kernel/cpu/perf_counter.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c index e8c68a5..ce1ae3f 100644 --- a/arch/x86/kernel/cpu/perf_counter.c +++ b/arch/x86/kernel/cpu/perf_counter.c @@ -1224,6 +1224,8 @@ again: if (!intel_pmu_save_and_restart(counter)) continue; + data.period = counter->hw.last_period; + if (perf_counter_overflow(counter, 1, &data)) intel_pmu_disable_counter(&counter->hw, bit); } -- cgit v1.1 From 3f4c3955ea320bde870ac2ce587466295aba5710 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov <gorcunov@gmail.com> Date: Wed, 17 Jun 2009 22:13:22 +0400 Subject: x86, ioapic: Don't call disconnect_bsp_APIC if no APIC present Vegard Nossum reported: [ 503.576724] ACPI: Preparing to enter system sleep state S5 [ 503.710857] Disabling non-boot CPUs ... [ 503.716853] Power down. [ 503.717770] ------------[ cut here ]------------ [ 503.717770] WARNING: at arch/x86/kernel/apic/apic.c:249 native_apic_write_du) [ 503.717770] Hardware name: OptiPlex GX100 [ 503.717770] Modules linked in: [ 503.717770] Pid: 2136, comm: halt Not tainted 2.6.30 #443 [ 503.717770] Call Trace: [ 503.717770] [<c154d327>] ? printk+0x18/0x1a [ 503.717770] [<c1017358>] ? native_apic_write_dummy+0x38/0x50 [ 503.717770] [<c10360fc>] warn_slowpath_common+0x6c/0xc0 [ 503.717770] [<c1017358>] ? native_apic_write_dummy+0x38/0x50 [ 503.717770] [<c1036165>] warn_slowpath_null+0x15/0x20 [ 503.717770] [<c1017358>] native_apic_write_dummy+0x38/0x50 [ 503.717770] [<c1017173>] disconnect_bsp_APIC+0x63/0x100 [ 503.717770] [<c1019e48>] disable_IO_APIC+0xb8/0xc0 [ 503.717770] [<c1214231>] ? acpi_power_off+0x0/0x29 [ 503.717770] [<c1015e55>] native_machine_shutdown+0x65/0x80 [ 503.717770] [<c1015c36>] native_machine_power_off+0x26/0x30 [ 503.717770] [<c1015c49>] machine_power_off+0x9/0x10 [ 503.717770] [<c1046596>] kernel_power_off+0x36/0x40 [ 503.717770] [<c104680d>] sys_reboot+0xfd/0x1f0 [ 503.717770] [<c109daa0>] ? perf_swcounter_event+0xb0/0x130 [ 503.717770] [<c109db7d>] ? perf_counter_task_sched_out+0x5d/0x120 [ 503.717770] [<c102dfc6>] ? finish_task_switch+0x56/0xd0 [ 503.717770] [<c154da1e>] ? schedule+0x49e/0xb40 [ 503.717770] [<c10444b0>] ? sys_kill+0x70/0x160 [ 503.717770] [<c119d9db>] ? selinux_file_ioctl+0x3b/0x50 [ 503.717770] [<c10dd443>] ? sys_ioctl+0x63/0x70 [ 503.717770] [<c1003024>] sysenter_do_call+0x12/0x22 [ 503.717770] ---[ end trace 8157b5d0ed378f15 ]--- | | That's including this commit: | | commit 103428e57be323c3c5545db8ad12667099bc6005 |Author: Cyrill Gorcunov <gorcunov@openvz.org> |Date: Sun Jun 7 16:48:40 2009 +0400 | | x86, apic: Fix dummy apic read operation together with broken MP handling | If we have apic disabled we don't even switch to APIC mode and do not calling for connect_bsp_APIC. Though on SMP compiled kernel the native_machine_shutdown does try to write the apic register anyway. Fix it with explicit check if we really should touch apic registers. Reported-by: Vegard Nossum <vegard.nossum@gmail.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <20090617181322.GG10822@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/kernel/apic/io_apic.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 29d0752..b7a7920 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -2004,7 +2004,9 @@ void disable_IO_APIC(void) /* * Use virtual wire A mode when interrupt remapping is enabled. */ - disconnect_bsp_APIC(!intr_remapping_enabled && ioapic_i8259.pin != -1); + if (cpu_has_apic) + disconnect_bsp_APIC(!intr_remapping_enabled && + ioapic_i8259.pin != -1); } #ifdef CONFIG_X86_32 -- cgit v1.1 From a6c140969b4685f9b9f6773c0760f55ca66d1825 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox <willy@linux.intel.com> Date: Wed, 17 Jun 2009 16:33:34 -0400 Subject: Delete pcibios_select_root This function was only used by pci_claim_resource(), and the last commit deleted that use. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> --- arch/alpha/include/asm/pci.h | 13 ------------- arch/arm/include/asm/pci.h | 13 ------------- arch/ia64/include/asm/pci.h | 13 ------------- arch/mips/include/asm/pci.h | 13 ------------- arch/mn10300/include/asm/pci.h | 13 ------------- arch/parisc/include/asm/pci.h | 13 ------------- arch/powerpc/include/asm/pci.h | 13 ------------- arch/sh/include/asm/pci.h | 13 ------------- arch/sparc/include/asm/pci_64.h | 2 -- arch/sparc/kernel/pci.c | 13 ------------- 10 files changed, 119 deletions(-) (limited to 'arch') diff --git a/arch/alpha/include/asm/pci.h b/arch/alpha/include/asm/pci.h index cb04eaa..d22ace9 100644 --- a/arch/alpha/include/asm/pci.h +++ b/arch/alpha/include/asm/pci.h @@ -237,19 +237,6 @@ extern void pcibios_resource_to_bus(struct pci_dev *, struct pci_bus_region *, extern void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, struct pci_bus_region *region); -static inline struct resource * -pcibios_select_root(struct pci_dev *pdev, struct resource *res) -{ - struct resource *root = NULL; - - if (res->flags & IORESOURCE_IO) - root = &ioport_resource; - if (res->flags & IORESOURCE_MEM) - root = &iomem_resource; - - return root; -} - #define pci_domain_nr(bus) ((struct pci_controller *)(bus)->sysdata)->index static inline int pci_proc_domain(struct pci_bus *bus) diff --git a/arch/arm/include/asm/pci.h b/arch/arm/include/asm/pci.h index 918d0cb..0abf386 100644 --- a/arch/arm/include/asm/pci.h +++ b/arch/arm/include/asm/pci.h @@ -65,19 +65,6 @@ extern void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, struct pci_bus_region *region); -static inline struct resource * -pcibios_select_root(struct pci_dev *pdev, struct resource *res) -{ - struct resource *root = NULL; - - if (res->flags & IORESOURCE_IO) - root = &ioport_resource; - if (res->flags & IORESOURCE_MEM) - root = &iomem_resource; - - return root; -} - /* * Dummy implementation; always return 0. */ diff --git a/arch/ia64/include/asm/pci.h b/arch/ia64/include/asm/pci.h index 1d660d8..fcfca56 100644 --- a/arch/ia64/include/asm/pci.h +++ b/arch/ia64/include/asm/pci.h @@ -135,19 +135,6 @@ extern void pcibios_resource_to_bus(struct pci_dev *dev, extern void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, struct pci_bus_region *region); -static inline struct resource * -pcibios_select_root(struct pci_dev *pdev, struct resource *res) -{ - struct resource *root = NULL; - - if (res->flags & IORESOURCE_IO) - root = &ioport_resource; - if (res->flags & IORESOURCE_MEM) - root = &iomem_resource; - - return root; -} - #define pcibios_scan_all_fns(a, b) 0 #define HAVE_ARCH_PCI_GET_LEGACY_IDE_IRQ diff --git a/arch/mips/include/asm/pci.h b/arch/mips/include/asm/pci.h index 053e463..a68d111 100644 --- a/arch/mips/include/asm/pci.h +++ b/arch/mips/include/asm/pci.h @@ -142,19 +142,6 @@ extern void pcibios_resource_to_bus(struct pci_dev *dev, extern void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, struct pci_bus_region *region); -static inline struct resource * -pcibios_select_root(struct pci_dev *pdev, struct resource *res) -{ - struct resource *root = NULL; - - if (res->flags & IORESOURCE_IO) - root = &ioport_resource; - if (res->flags & IORESOURCE_MEM) - root = &iomem_resource; - - return root; -} - #define pci_domain_nr(bus) ((struct pci_controller *)(bus)->sysdata)->index static inline int pci_proc_domain(struct pci_bus *bus) diff --git a/arch/mn10300/include/asm/pci.h b/arch/mn10300/include/asm/pci.h index 0517b45..e58b9a4 100644 --- a/arch/mn10300/include/asm/pci.h +++ b/arch/mn10300/include/asm/pci.h @@ -106,19 +106,6 @@ extern void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, struct pci_bus_region *region); -static inline struct resource * -pcibios_select_root(struct pci_dev *pdev, struct resource *res) -{ - struct resource *root = NULL; - - if (res->flags & IORESOURCE_IO) - root = &ioport_resource; - if (res->flags & IORESOURCE_MEM) - root = &iomem_resource; - - return root; -} - #define pcibios_scan_all_fns(a, b) 0 static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) diff --git a/arch/parisc/include/asm/pci.h b/arch/parisc/include/asm/pci.h index 4ba868f..7d842d6 100644 --- a/arch/parisc/include/asm/pci.h +++ b/arch/parisc/include/asm/pci.h @@ -268,19 +268,6 @@ extern void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, struct pci_bus_region *region); -static inline struct resource * -pcibios_select_root(struct pci_dev *pdev, struct resource *res) -{ - struct resource *root = NULL; - - if (res->flags & IORESOURCE_IO) - root = &ioport_resource; - if (res->flags & IORESOURCE_MEM) - root = &iomem_resource; - - return root; -} - static inline void pcibios_penalize_isa_irq(int irq, int active) { /* We don't need to penalize isa irq's */ diff --git a/arch/powerpc/include/asm/pci.h b/arch/powerpc/include/asm/pci.h index ba17d5d..d9483c5 100644 --- a/arch/powerpc/include/asm/pci.h +++ b/arch/powerpc/include/asm/pci.h @@ -195,19 +195,6 @@ extern void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, struct pci_bus_region *region); -static inline struct resource *pcibios_select_root(struct pci_dev *pdev, - struct resource *res) -{ - struct resource *root = NULL; - - if (res->flags & IORESOURCE_IO) - root = &ioport_resource; - if (res->flags & IORESOURCE_MEM) - root = &iomem_resource; - - return root; -} - extern void pcibios_claim_one_bus(struct pci_bus *b); extern void pcibios_finish_adding_to_bus(struct pci_bus *bus); diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h index ae0da6f..d3633f5 100644 --- a/arch/sh/include/asm/pci.h +++ b/arch/sh/include/asm/pci.h @@ -137,19 +137,6 @@ extern void pcibios_resource_to_bus(struct pci_dev *dev, extern void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, struct pci_bus_region *region); -static inline struct resource * -pcibios_select_root(struct pci_dev *pdev, struct resource *res) -{ - struct resource *root = NULL; - - if (res->flags & IORESOURCE_IO) - root = &ioport_resource; - if (res->flags & IORESOURCE_MEM) - root = &iomem_resource; - - return root; -} - /* Chances are this interrupt is wired PC-style ... */ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) { diff --git a/arch/sparc/include/asm/pci_64.h b/arch/sparc/include/asm/pci_64.h index 4f79a54..7a1e356 100644 --- a/arch/sparc/include/asm/pci_64.h +++ b/arch/sparc/include/asm/pci_64.h @@ -191,8 +191,6 @@ extern void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, struct pci_bus_region *region); -extern struct resource *pcibios_select_root(struct pci_dev *, struct resource *); - static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) { return PCI_IRQ_NONE; diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c index 4638fba..57859ad 100644 --- a/arch/sparc/kernel/pci.c +++ b/arch/sparc/kernel/pci.c @@ -711,19 +711,6 @@ void __devinit pcibios_fixup_bus(struct pci_bus *pbus) pbus->resource[1] = &pbm->mem_space; } -struct resource *pcibios_select_root(struct pci_dev *pdev, struct resource *r) -{ - struct pci_pbm_info *pbm = pdev->bus->sysdata; - struct resource *root = NULL; - - if (r->flags & IORESOURCE_IO) - root = &pbm->io_space; - if (r->flags & IORESOURCE_MEM) - root = &pbm->mem_space; - - return root; -} - void pcibios_update_irq(struct pci_dev *pdev, int irq) { } -- cgit v1.1 From a76117dfd687ec4be0a9a05214f3009cc5f73a42 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox <willy@linux.intel.com> Date: Wed, 17 Jun 2009 16:33:35 -0400 Subject: x86: Use pci_claim_resource Instead of open-coding pci_find_parent_resource and request_resource, just call pci_claim_resource. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> --- arch/x86/pci/i386.c | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c index a85bef2..0fb56db 100644 --- a/arch/x86/pci/i386.c +++ b/arch/x86/pci/i386.c @@ -116,7 +116,7 @@ static void __init pcibios_allocate_bus_resources(struct list_head *bus_list) struct pci_bus *bus; struct pci_dev *dev; int idx; - struct resource *r, *pr; + struct resource *r; /* Depth-First Search on bus tree */ list_for_each_entry(bus, bus_list, node) { @@ -126,9 +126,8 @@ static void __init pcibios_allocate_bus_resources(struct list_head *bus_list) r = &dev->resource[idx]; if (!r->flags) continue; - pr = pci_find_parent_resource(dev, r); - if (!r->start || !pr || - request_resource(pr, r) < 0) { + if (!r->start || + pci_claim_resource(dev, idx) < 0) { dev_info(&dev->dev, "BAR %d: can't allocate resource\n", idx); /* * Something is wrong with the region. @@ -149,7 +148,7 @@ static void __init pcibios_allocate_resources(int pass) struct pci_dev *dev = NULL; int idx, disabled; u16 command; - struct resource *r, *pr; + struct resource *r; for_each_pci_dev(dev) { pci_read_config_word(dev, PCI_COMMAND, &command); @@ -168,8 +167,7 @@ static void __init pcibios_allocate_resources(int pass) (unsigned long long) r->start, (unsigned long long) r->end, r->flags, disabled, pass); - pr = pci_find_parent_resource(dev, r); - if (!pr || request_resource(pr, r) < 0) { + if (pci_claim_resource(dev, idx) < 0) { dev_info(&dev->dev, "BAR %d: can't allocate resource\n", idx); /* We'll assign a new address later */ r->end -= r->start; @@ -197,7 +195,7 @@ static void __init pcibios_allocate_resources(int pass) static int __init pcibios_assign_resources(void) { struct pci_dev *dev = NULL; - struct resource *r, *pr; + struct resource *r; if (!(pci_probe & PCI_ASSIGN_ROMS)) { /* @@ -209,8 +207,7 @@ static int __init pcibios_assign_resources(void) r = &dev->resource[PCI_ROM_RESOURCE]; if (!r->flags || !r->start) continue; - pr = pci_find_parent_resource(dev, r); - if (!pr || request_resource(pr, r) < 0) { + if (pci_claim_resource(dev, PCI_ROM_RESOURCE) < 0) { r->end -= r->start; r->start = 0; } -- cgit v1.1 From 1d89b30cc9be41af87881682ec82e2c107849dbe Mon Sep 17 00:00:00 2001 From: Matthew Wilcox <willy@linux.intel.com> Date: Wed, 17 Jun 2009 16:33:36 -0400 Subject: ia64: Fix resource assignment for root busses ia64 was assigning resources to root busses after allocations had been made for child busses. Calling pcibios_setup_root_windows() from pcibios_fixup_bus() solves this problem by assigning the resources to the root bus before child busses are scanned. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Tested-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> --- arch/ia64/pci/pci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c index e643373..729298f 100644 --- a/arch/ia64/pci/pci.c +++ b/arch/ia64/pci/pci.c @@ -371,8 +371,6 @@ pci_acpi_scan_root(struct acpi_device *device, int domain, int bus) * such quirk. So we just ignore the case now. */ pbus = pci_scan_bus_parented(NULL, bus, &pci_root_ops, controller); - if (pbus) - pcibios_setup_root_windows(pbus, controller); return pbus; @@ -490,6 +488,8 @@ pcibios_fixup_bus (struct pci_bus *b) if (b->self) { pci_read_bridge_bases(b); pcibios_fixup_bridge_resources(b->self); + } else { + pcibios_setup_root_windows(b, b->sysdata); } list_for_each_entry(dev, &b->devices, bus_list) pcibios_fixup_device_resources(dev); -- cgit v1.1 From b7d3740ace895b85e802c618b2edfed1bba67d9e Mon Sep 17 00:00:00 2001 From: Paul Mundt <lethal@linux-sh.org> Date: Thu, 18 Jun 2009 13:28:09 +0900 Subject: sh: defconfig updates. Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/configs/ap325rxa_defconfig | 117 ++---- arch/sh/configs/cayman_defconfig | 165 +++------ arch/sh/configs/dreamcast_defconfig | 78 ++-- arch/sh/configs/edosk7705_defconfig | 62 ++-- arch/sh/configs/edosk7760_defconfig | 79 ++-- arch/sh/configs/espt_defconfig | 78 ++-- arch/sh/configs/hp6xx_defconfig | 70 ++-- arch/sh/configs/landisk_defconfig | 136 +++---- arch/sh/configs/lboxre2_defconfig | 83 ++--- arch/sh/configs/magicpanelr2_defconfig | 75 ++-- arch/sh/configs/microdev_defconfig | 76 ++-- arch/sh/configs/migor_defconfig | 125 ++----- arch/sh/configs/polaris_defconfig | 67 ++-- arch/sh/configs/r7780mp_defconfig | 42 +-- arch/sh/configs/r7785rp_defconfig | 89 ++--- arch/sh/configs/rsk7201_defconfig | 77 ++-- arch/sh/configs/rsk7203_defconfig | 141 +++++--- arch/sh/configs/rts7751r2d1_defconfig | 106 +++--- arch/sh/configs/rts7751r2dplus_defconfig | 107 +++--- arch/sh/configs/sdk7780_defconfig | 88 ++--- arch/sh/configs/se7206_defconfig | 93 ++--- arch/sh/configs/se7343_defconfig | 219 +++++------ arch/sh/configs/se7619_defconfig | 70 ++-- arch/sh/configs/se7705_defconfig | 74 ++-- arch/sh/configs/se7712_defconfig | 78 ++-- arch/sh/configs/se7721_defconfig | 87 ++--- arch/sh/configs/se7722_defconfig | 80 ++-- arch/sh/configs/se7724_defconfig | 161 ++------ arch/sh/configs/se7750_defconfig | 80 ++-- arch/sh/configs/se7751_defconfig | 75 ++-- arch/sh/configs/se7780_defconfig | 90 ++--- arch/sh/configs/sh03_defconfig | 90 ++--- arch/sh/configs/sh7710voipgw_defconfig | 75 ++-- arch/sh/configs/sh7724_generic_defconfig | 72 ++-- arch/sh/configs/sh7763rdp_defconfig | 84 ++--- arch/sh/configs/sh7770_generic_defconfig | 66 ++-- arch/sh/configs/sh7785lcr_32bit_defconfig | 85 ++--- arch/sh/configs/sh7785lcr_defconfig | 85 ++--- arch/sh/configs/shmin_defconfig | 74 ++-- arch/sh/configs/shx3_defconfig | 125 ++++--- arch/sh/configs/snapgear_defconfig | 76 ++-- arch/sh/configs/systemh_defconfig | 66 ++-- arch/sh/configs/titan_defconfig | 91 ++--- arch/sh/configs/ul2_defconfig | 79 ++-- arch/sh/configs/urquell_defconfig | 584 +++++++++++++++++++++++++----- 45 files changed, 2245 insertions(+), 2375 deletions(-) (limited to 'arch') diff --git a/arch/sh/configs/ap325rxa_defconfig b/arch/sh/configs/ap325rxa_defconfig index 022f70e..929edf7 100644 --- a/arch/sh/configs/ap325rxa_defconfig +++ b/arch/sh/configs/ap325rxa_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Mon Apr 27 12:42:06 2009 +# Linux kernel version: 2.6.30 +# Thu Jun 18 12:20:40 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -20,6 +20,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_SYS_SUPPORTS_CMT=y +CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -75,7 +76,6 @@ CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -88,7 +88,12 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -180,6 +185,7 @@ CONFIG_CPU_SUBTYPE_SH7723=y CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MEMORY_START=0x08000000 CONFIG_MEMORY_SIZE=0x08000000 CONFIG_29BIT=y @@ -195,7 +201,6 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set -CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -208,9 +213,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # # Cache configuration @@ -228,7 +233,6 @@ CONFIG_SH_FPU=y # CONFIG_SH_STORE_QUEUES is not set CONFIG_CPU_HAS_INTEVT=y CONFIG_CPU_HAS_SR_RB=y -CONFIG_CPU_HAS_PTEA=y CONFIG_CPU_HAS_FPU=y # @@ -239,10 +243,10 @@ CONFIG_SH_AP325RXA=y # # Timer and clock configuration # -CONFIG_SH_TMU=y +CONFIG_SH_TIMER_TMU=y # CONFIG_SH_TIMER_CMT is not set -CONFIG_SH_TIMER_IRQ=16 CONFIG_SH_PCLK_FREQ=33333333 +CONFIG_SH_CLK_CPG=y CONFIG_TICK_ONESHOT=y # CONFIG_NO_HZ is not set CONFIG_HIGH_RES_TIMERS=y @@ -284,12 +288,14 @@ CONFIG_SECCOMP=y # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y CONFIG_GUSA=y +# CONFIG_SPARSE_IRQ is not set # # Boot options # CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=tty1 console=ttySC5,38400 root=/dev/nfs ip=dhcp" @@ -372,6 +378,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -389,7 +396,11 @@ CONFIG_WIRELESS=y # CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -532,6 +543,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_AT25 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -555,10 +567,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -575,6 +583,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_LIBFC is not set # CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set @@ -583,7 +592,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -628,6 +636,7 @@ CONFIG_SMSC911X=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -751,7 +760,6 @@ CONFIG_I2C_SH_MOBILE=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -823,57 +831,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -CONFIG_VIDEO_DEV=y -CONFIG_VIDEO_V4L2_COMMON=y -# CONFIG_VIDEO_ALLOW_V4L1 is not set -CONFIG_VIDEO_V4L1_COMPAT=y -# CONFIG_DVB_CORE is not set -CONFIG_VIDEO_MEDIA=y - -# -# Multimedia drivers -# -# CONFIG_MEDIA_ATTACH is not set -CONFIG_MEDIA_TUNER=y -# CONFIG_MEDIA_TUNER_CUSTOMISE is not set -CONFIG_MEDIA_TUNER_SIMPLE=y -CONFIG_MEDIA_TUNER_TDA8290=y -CONFIG_MEDIA_TUNER_TDA9887=y -CONFIG_MEDIA_TUNER_TEA5761=y -CONFIG_MEDIA_TUNER_TEA5767=y -CONFIG_MEDIA_TUNER_MT20XX=y -CONFIG_MEDIA_TUNER_XC2028=y -CONFIG_MEDIA_TUNER_XC5000=y -CONFIG_MEDIA_TUNER_MC44S803=y -CONFIG_VIDEO_V4L2=y -CONFIG_VIDEOBUF_GEN=y -CONFIG_VIDEOBUF_DMA_CONTIG=y -CONFIG_VIDEO_CAPTURE_DRIVERS=y -# CONFIG_VIDEO_ADV_DEBUG is not set -# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set -CONFIG_VIDEO_HELPER_CHIPS_AUTO=y -# CONFIG_VIDEO_VIVI is not set -# CONFIG_VIDEO_SAA5246A is not set -# CONFIG_VIDEO_SAA5249 is not set -CONFIG_SOC_CAMERA=y -# CONFIG_SOC_CAMERA_MT9M001 is not set -# CONFIG_SOC_CAMERA_MT9M111 is not set -# CONFIG_SOC_CAMERA_MT9T031 is not set -# CONFIG_SOC_CAMERA_MT9V022 is not set -# CONFIG_SOC_CAMERA_TW9910 is not set -CONFIG_SOC_CAMERA_PLATFORM=y -CONFIG_SOC_CAMERA_OV772X=y -CONFIG_VIDEO_SH_MOBILE_CEU=y -# CONFIG_RADIO_ADAPTERS is not set -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1017,6 +975,7 @@ CONFIG_RTC_DRV_PCF8563=y # on-CPU RTC drivers # # CONFIG_RTC_DRV_SH is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set CONFIG_UIO=y @@ -1024,6 +983,10 @@ CONFIG_UIO=y CONFIG_UIO_PDRV_GENIRQ=y # CONFIG_UIO_SMX is not set # CONFIG_UIO_SERCOS3 is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1045,10 +1008,11 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1204,28 +1168,12 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_PREEMPT_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set -# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -1347,3 +1295,4 @@ CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y diff --git a/arch/sh/configs/cayman_defconfig b/arch/sh/configs/cayman_defconfig index 40301f8..6b863cb 100644 --- a/arch/sh/configs/cayman_defconfig +++ b/arch/sh/configs/cayman_defconfig @@ -1,24 +1,26 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Mon Apr 27 13:42:53 2009 +# Linux kernel version: 2.6.30 +# Thu Jun 18 12:21:54 2009 # CONFIG_SUPERH=y # CONFIG_SUPERH32 is not set CONFIG_SUPERH64=y CONFIG_ARCH_DEFCONFIG="arch/sh/configs/cayman_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CSUM=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y # CONFIG_GENERIC_GPIO is not set -# CONFIG_GENERIC_TIME is not set -# CONFIG_GENERIC_CLOCKEVENTS is not set +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_ARCH_SUSPEND_POSSIBLE is not set # CONFIG_ARCH_HIBERNATION_POSSIBLE is not set CONFIG_SYS_SUPPORTS_PCI=y +CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -71,7 +73,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -84,8 +85,13 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -140,6 +146,7 @@ CONFIG_CPU_SUBTYPE_SH5_101=y CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x20000000 +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MEMORY_START=0x80000000 CONFIG_MEMORY_SIZE=0x00400000 CONFIG_32BIT=y @@ -153,7 +160,6 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set -CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_HUGETLB_PAGE_SIZE_64K=y # CONFIG_HUGETLB_PAGE_SIZE_256K is not set # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set @@ -172,9 +178,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # # Cache configuration @@ -190,7 +196,6 @@ CONFIG_CPU_LITTLE_ENDIAN=y # CONFIG_CPU_BIG_ENDIAN is not set CONFIG_SH_FPU=y # CONFIG_SH64_FPU_DENORM_FLUSH is not set -CONFIG_SH64_USER_MISALIGNED_FIXUP=y CONFIG_SH64_ID2815_WORKAROUND=y CONFIG_CPU_HAS_FPU=y @@ -202,8 +207,13 @@ CONFIG_SH_CAYMAN=y # # Timer and clock configuration # -CONFIG_SH_TIMER_IRQ=16 +CONFIG_SH_TIMER_TMU=y CONFIG_SH_PCLK_FREQ=50000000 +CONFIG_SH_CLK_CPG=y +CONFIG_SH_CLK_CPG_LEGACY=y +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # # CPU Frequency scaling @@ -237,12 +247,14 @@ CONFIG_HZ=250 # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y +# CONFIG_SPARSE_IRQ is not set # # Boot options # CONFIG_ZERO_PAGE_OFFSET=0x00001000 -CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_BOOT_LINK_OFFSET=0x00400000 +CONFIG_ENTRY_OFFSET=0x00001000 # CONFIG_CMDLINE_BOOL is not set # @@ -332,6 +344,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -349,7 +362,11 @@ CONFIG_WIRELESS=y # CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -402,7 +419,9 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -425,10 +444,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -446,6 +461,7 @@ CONFIG_SCSI_SPI_ATTRS=y CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -454,6 +470,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set @@ -468,7 +485,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_QLOGIC_1280 is not set @@ -497,7 +513,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -530,6 +545,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -722,7 +738,6 @@ CONFIG_I2C_HELPER_AUTO=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -781,6 +796,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -827,92 +843,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -CONFIG_VIDEO_DEV=m -CONFIG_VIDEO_V4L2_COMMON=m -CONFIG_VIDEO_ALLOW_V4L1=y -CONFIG_VIDEO_V4L1_COMPAT=y -CONFIG_DVB_CORE=y -CONFIG_VIDEO_MEDIA=m - -# -# Multimedia drivers -# -# CONFIG_MEDIA_ATTACH is not set -CONFIG_MEDIA_TUNER=m -# CONFIG_MEDIA_TUNER_CUSTOMISE is not set -CONFIG_MEDIA_TUNER_SIMPLE=m -CONFIG_MEDIA_TUNER_TDA8290=m -CONFIG_MEDIA_TUNER_TDA9887=m -CONFIG_MEDIA_TUNER_TEA5761=m -CONFIG_MEDIA_TUNER_TEA5767=m -CONFIG_MEDIA_TUNER_MT20XX=m -CONFIG_MEDIA_TUNER_XC2028=m -CONFIG_MEDIA_TUNER_XC5000=m -CONFIG_MEDIA_TUNER_MC44S803=m -CONFIG_VIDEO_V4L2=m -CONFIG_VIDEO_V4L1=m -CONFIG_VIDEO_CAPTURE_DRIVERS=y -# CONFIG_VIDEO_ADV_DEBUG is not set -# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set -CONFIG_VIDEO_HELPER_CHIPS_AUTO=y -# CONFIG_VIDEO_VIVI is not set -# CONFIG_VIDEO_BT848 is not set -# CONFIG_VIDEO_CPIA is not set -# CONFIG_VIDEO_SAA5246A is not set -# CONFIG_VIDEO_SAA5249 is not set -# CONFIG_VIDEO_SAA7134 is not set -# CONFIG_VIDEO_MXB is not set -# CONFIG_VIDEO_HEXIUM_ORION is not set -# CONFIG_VIDEO_HEXIUM_GEMINI is not set -# CONFIG_VIDEO_CX88 is not set -# CONFIG_VIDEO_CX23885 is not set -# CONFIG_VIDEO_IVTV is not set -# CONFIG_VIDEO_CX18 is not set -# CONFIG_VIDEO_CAFE_CCIC is not set -# CONFIG_SOC_CAMERA is not set -# CONFIG_RADIO_ADAPTERS is not set -# CONFIG_DVB_DYNAMIC_MINORS is not set -CONFIG_DVB_CAPTURE_DRIVERS=y - -# -# Supported SAA7146 based PCI Adapters -# -# CONFIG_TTPCI_EEPROM is not set -# CONFIG_DVB_AV7110 is not set -# CONFIG_DVB_BUDGET_CORE is not set - -# -# Supported FlexCopII (B2C2) Adapters -# -# CONFIG_DVB_B2C2_FLEXCOP is not set - -# -# Supported BT878 Adapters -# - -# -# Supported Pluto2 Adapters -# -# CONFIG_DVB_PLUTO2 is not set - -# -# Supported SDMC DM1105 Adapters -# -# CONFIG_DVB_DM1105 is not set - -# -# Supported DVB Frontends -# -# CONFIG_DVB_FE_CUSTOMISE is not set -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1041,10 +972,15 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set +CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1065,10 +1001,11 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1228,29 +1165,28 @@ CONFIG_FRAME_POINTER=y # CONFIG_SYSCTL_SYSCALL_CHECK is not set # CONFIG_PAGE_POISONING is not set CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set +# CONFIG_KMEMCHECK is not set # CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_DEBUG_BOOTMEM is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_4KSTACKS is not set # CONFIG_SH_NO_BSS_INIT is not set -# CONFIG_MORE_COMPILE_OPTIONS is not set CONFIG_SH64_SR_WATCH=y -# CONFIG_POOR_MANS_STRACE is not set # # Security options @@ -1364,3 +1300,4 @@ CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y diff --git a/arch/sh/configs/dreamcast_defconfig b/arch/sh/configs/dreamcast_defconfig index 1f3cc98..95717a0 100644 --- a/arch/sh/configs/dreamcast_defconfig +++ b/arch/sh/configs/dreamcast_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Mon Apr 27 12:44:27 2009 +# Linux kernel version: 2.6.30 +# Thu Jun 18 12:24:48 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -17,9 +17,11 @@ CONFIG_GENERIC_IRQ_PROBE=y # CONFIG_GENERIC_GPIO is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CMOS_UPDATE=y # CONFIG_ARCH_SUSPEND_POSSIBLE is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_SYS_SUPPORTS_PCI=y +CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -72,7 +74,6 @@ CONFIG_UID16=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -85,8 +86,13 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -177,6 +183,7 @@ CONFIG_CPU_SUBTYPE_SH7091=y CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x01000000 CONFIG_29BIT=y @@ -191,7 +198,6 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set -CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_HUGETLB_PAGE_SIZE_64K=y # CONFIG_HUGETLB_PAGE_SIZE_256K is not set # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set @@ -210,9 +216,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # # Cache configuration @@ -230,7 +236,6 @@ CONFIG_SH_FPU=y CONFIG_SH_STORE_QUEUES=y CONFIG_CPU_HAS_INTEVT=y CONFIG_CPU_HAS_SR_RB=y -CONFIG_CPU_HAS_PTEA=y CONFIG_CPU_HAS_FPU=y # @@ -241,9 +246,10 @@ CONFIG_SH_DREAMCAST=y # # Timer and clock configuration # -CONFIG_SH_TMU=y -CONFIG_SH_TIMER_IRQ=16 +CONFIG_SH_TIMER_TMU=y CONFIG_SH_PCLK_FREQ=49876504 +CONFIG_SH_CLK_CPG=y +CONFIG_SH_CLK_CPG_LEGACY=y # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -307,12 +313,14 @@ CONFIG_SECCOMP=y CONFIG_PREEMPT=y CONFIG_GUSA=y # CONFIG_GUSA_RB is not set +# CONFIG_SPARSE_IRQ is not set # # Boot options # CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_ENTRY_OFFSET=0x00001000 # CONFIG_UBC_WAKEUP is not set CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttySC1,115200 panic=3" @@ -401,6 +409,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -418,7 +427,11 @@ CONFIG_WIRELESS=y # CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -463,6 +476,7 @@ CONFIG_MISC_DEVICES=y # EEPROM support # # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -488,7 +502,6 @@ CONFIG_HAVE_IDE=y # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -541,6 +554,7 @@ CONFIG_8139TOO=y # CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set +# CONFIG_KS8842 is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set @@ -697,22 +711,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -841,10 +840,15 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set +CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -856,10 +860,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -956,28 +961,12 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_PREEMPT_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set -# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -1091,3 +1080,4 @@ CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y diff --git a/arch/sh/configs/edosk7705_defconfig b/arch/sh/configs/edosk7705_defconfig index d709245..497414c 100644 --- a/arch/sh/configs/edosk7705_defconfig +++ b/arch/sh/configs/edosk7705_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Mon Apr 27 12:45:04 2009 +# Linux kernel version: 2.6.30 +# Thu Jun 18 12:25:35 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -18,6 +18,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_ARCH_SUSPEND_POSSIBLE is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -57,7 +58,6 @@ CONFIG_EMBEDDED=y # CONFIG_UID16 is not set # CONFIG_SYSCTL_SYSCALL is not set # CONFIG_KALLSYMS is not set -# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set # CONFIG_PRINTK is not set # CONFIG_BUG is not set @@ -70,7 +70,12 @@ CONFIG_EMBEDDED=y # CONFIG_EVENTFD is not set CONFIG_SHMEM=y # CONFIG_AIO is not set + +# +# Performance Counters +# # CONFIG_VM_EVENT_COUNTERS is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_COMPAT_BRK is not set # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -136,6 +141,7 @@ CONFIG_CPU_SUBTYPE_SH7705=y CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MEMORY_START=0x08000000 CONFIG_MEMORY_SIZE=0x04000000 CONFIG_29BIT=y @@ -152,7 +158,6 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set -CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y # CONFIG_FLATMEM_MANUAL is not set # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -166,9 +171,9 @@ CONFIG_MIGRATION=y # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # # Cache configuration @@ -196,9 +201,10 @@ CONFIG_SH_EDOSK7705=y # # Timer and clock configuration # -CONFIG_SH_TMU=y -CONFIG_SH_TIMER_IRQ=16 +CONFIG_SH_TIMER_TMU=y CONFIG_SH_PCLK_FREQ=31250000 +CONFIG_SH_CLK_CPG=y +CONFIG_SH_CLK_CPG_LEGACY=y # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -243,6 +249,7 @@ CONFIG_GUSA=y # CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_ENTRY_OFFSET=0x00001000 # CONFIG_CMDLINE_BOOL is not set # @@ -335,21 +342,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -369,17 +362,25 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # # File systems # +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set @@ -418,26 +419,12 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_FTRACE is not set # CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set -# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -462,3 +449,4 @@ CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_GENERIC_ATOMIC64=y diff --git a/arch/sh/configs/edosk7760_defconfig b/arch/sh/configs/edosk7760_defconfig index a822b1d..77684ed 100644 --- a/arch/sh/configs/edosk7760_defconfig +++ b/arch/sh/configs/edosk7760_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Mon Apr 27 12:45:25 2009 +# Linux kernel version: 2.6.30 +# Thu Jun 18 12:25:55 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -19,6 +19,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_ARCH_SUSPEND_POSSIBLE is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -78,7 +79,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -91,8 +91,13 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -182,6 +187,7 @@ CONFIG_CPU_SUBTYPE_SH7760=y CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x04000000 CONFIG_29BIT=y @@ -196,7 +202,6 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set -CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -209,9 +214,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # # Cache configuration @@ -229,7 +234,6 @@ CONFIG_SH_FPU=y CONFIG_SH_STORE_QUEUES=y CONFIG_CPU_HAS_INTEVT=y CONFIG_CPU_HAS_SR_RB=y -CONFIG_CPU_HAS_PTEA=y CONFIG_CPU_HAS_FPU=y # @@ -240,9 +244,10 @@ CONFIG_SH_EDOSK7760=y # # Timer and clock configuration # -CONFIG_SH_TMU=y -CONFIG_SH_TIMER_IRQ=16 +CONFIG_SH_TIMER_TMU=y CONFIG_SH_PCLK_FREQ=33333333 +CONFIG_SH_CLK_CPG=y +CONFIG_SH_CLK_CPG_LEGACY=y CONFIG_TICK_ONESHOT=y # CONFIG_NO_HZ is not set CONFIG_HIGH_RES_TIMERS=y @@ -258,6 +263,7 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_SH_DMA_API=y CONFIG_SH_DMA=y +CONFIG_SH_DMA_IRQ_MULTI=y CONFIG_NR_ONCHIP_DMA_CHANNELS=8 # CONFIG_NR_DMA_CHANNELS_BOOL is not set # CONFIG_SH_DMABRG is not set @@ -289,12 +295,14 @@ CONFIG_SCHED_HRTICK=y CONFIG_PREEMPT=y CONFIG_GUSA=y # CONFIG_GUSA_RB is not set +# CONFIG_SPARSE_IRQ is not set # # Boot options # CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x02000000 +CONFIG_ENTRY_OFFSET=0x00001000 # CONFIG_UBC_WAKEUP is not set CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="mem=64M console=ttySC2,115200 root=/dev/nfs rw nfsroot=192.168.0.3:/scripts/filesys ip=192.168.0.4" @@ -373,6 +381,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -390,7 +399,11 @@ CONFIG_WIRELESS=y # CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -523,7 +536,6 @@ CONFIG_HAVE_IDE=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -548,6 +560,7 @@ CONFIG_SMC91X=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -670,7 +683,6 @@ CONFIG_I2C_SH7760=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set CONFIG_I2C_DEBUG_CORE=y CONFIG_I2C_DEBUG_ALGO=y @@ -703,22 +715,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -783,6 +780,11 @@ CONFIG_SND_JACK=y # CONFIG_SND_VERBOSE_PROCFS is not set CONFIG_SND_VERBOSE_PRINTK=y # CONFIG_SND_DEBUG is not set +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_MTPAV is not set @@ -803,10 +805,15 @@ CONFIG_SND_SOC_I2C_AND_SPI=y # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -829,10 +836,11 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1015,18 +1023,16 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -1043,10 +1049,8 @@ CONFIG_EARLY_PRINTK=y CONFIG_DEBUG_STACKOVERFLOW=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_4KSTACKS is not set -# CONFIG_IRQSTACKS is not set CONFIG_DUMP_CODE=y # CONFIG_SH_NO_BSS_INIT is not set -# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -1165,3 +1169,4 @@ CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y diff --git a/arch/sh/configs/espt_defconfig b/arch/sh/configs/espt_defconfig index c5b5007..881128e 100644 --- a/arch/sh/configs/espt_defconfig +++ b/arch/sh/configs/espt_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Mon Apr 27 12:46:26 2009 +# Linux kernel version: 2.6.30 +# Thu Jun 18 12:27:21 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -19,6 +19,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_ARCH_SUSPEND_POSSIBLE is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -79,7 +80,6 @@ CONFIG_UID16=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -92,14 +92,19 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set CONFIG_PROFILING=y CONFIG_TRACEPOINTS=y -# CONFIG_MARKERS is not set +CONFIG_MARKERS=y CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set @@ -184,6 +189,7 @@ CONFIG_CPU_SUBTYPE_SH7763=y CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x04000000 CONFIG_29BIT=y @@ -200,7 +206,6 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set -CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y # CONFIG_FLATMEM_MANUAL is not set # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -215,9 +220,9 @@ CONFIG_MIGRATION=y # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # # Cache configuration @@ -246,9 +251,10 @@ CONFIG_SH_ESPT=y # # Timer and clock configuration # -CONFIG_SH_TMU=y -CONFIG_SH_TIMER_IRQ=28 +CONFIG_SH_TIMER_TMU=y CONFIG_SH_PCLK_FREQ=66666666 +CONFIG_SH_CLK_CPG=y +CONFIG_SH_CLK_CPG_LEGACY=y # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -289,12 +295,14 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_GUSA=y +# CONFIG_SPARSE_IRQ is not set # # Boot options # CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/nfs ip=bootp" @@ -377,6 +385,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -529,10 +538,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -549,6 +554,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_LIBFC is not set # CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set @@ -557,7 +563,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -602,6 +607,7 @@ CONFIG_SH_ETH=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -720,22 +726,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -909,10 +900,15 @@ CONFIG_USB_STORAGE=y # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -933,10 +929,11 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1088,31 +1085,17 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_RING_BUFFER=y +CONFIG_EVENT_TRACING=y +CONFIG_CONTEXT_SWITCH_TRACER=y CONFIG_TRACING=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_FTRACE is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set -# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -1226,3 +1209,4 @@ CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y diff --git a/arch/sh/configs/hp6xx_defconfig b/arch/sh/configs/hp6xx_defconfig index 8e13027..3249d46 100644 --- a/arch/sh/configs/hp6xx_defconfig +++ b/arch/sh/configs/hp6xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Mon Apr 27 12:47:15 2009 +# Linux kernel version: 2.6.30 +# Thu Jun 18 12:28:12 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -20,6 +20,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -68,7 +69,6 @@ CONFIG_UID16=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -81,7 +81,12 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -165,6 +170,7 @@ CONFIG_CPU_SUBTYPE_SH7709=y CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MEMORY_START=0x0d000000 CONFIG_MEMORY_SIZE=0x00400000 CONFIG_29BIT=y @@ -179,7 +185,6 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set -CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -192,9 +197,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # # Cache configuration @@ -223,9 +228,10 @@ CONFIG_SH_HP6XX=y # # Timer and clock configuration # -CONFIG_SH_TMU=y -CONFIG_SH_TIMER_IRQ=16 +CONFIG_SH_TIMER_TMU=y CONFIG_SH_PCLK_FREQ=22110000 +CONFIG_SH_CLK_CPG=y +CONFIG_SH_CLK_CPG_LEGACY=y # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -249,7 +255,6 @@ CONFIG_NR_ONCHIP_DMA_CHANNELS=6 CONFIG_HD6446X_SERIES=y CONFIG_HD64461=y CONFIG_HD64461_IRQ=36 -CONFIG_HD64461_IOBASE=0xb0000000 CONFIG_HD64461_ENABLER=y # @@ -275,12 +280,14 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT is not set CONFIG_GUSA=y # CONFIG_GUSA_RB is not set +# CONFIG_SPARSE_IRQ is not set # # Boot options # CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_ENTRY_OFFSET=0x00001000 # CONFIG_CMDLINE_BOOL is not set # @@ -370,10 +377,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -387,6 +390,7 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_LIBFC is not set # CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set @@ -524,21 +528,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -651,9 +641,14 @@ CONFIG_RTC_INTF_DEV=y # on-CPU RTC drivers # CONFIG_RTC_DRV_SH=y +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -667,9 +662,10 @@ CONFIG_EXT2_FS=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -798,27 +794,12 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set -# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -939,3 +920,4 @@ CONFIG_CRC32=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_GENERIC_ATOMIC64=y diff --git a/arch/sh/configs/landisk_defconfig b/arch/sh/configs/landisk_defconfig index 7f549ae..ba05739 100644 --- a/arch/sh/configs/landisk_defconfig +++ b/arch/sh/configs/landisk_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Mon Apr 27 12:47:48 2009 +# Linux kernel version: 2.6.30 +# Thu Jun 18 12:28:45 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -20,6 +20,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_ARCH_SUSPEND_POSSIBLE is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_SYS_SUPPORTS_PCI=y +CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -70,7 +71,6 @@ CONFIG_UID16=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y CONFIG_KALLSYMS_EXTRA_PASS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -83,8 +83,13 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -174,6 +179,7 @@ CONFIG_CPU_SUBTYPE_SH7751R=y CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x04000000 CONFIG_29BIT=y @@ -188,7 +194,6 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set -CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -201,9 +206,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # # Cache configuration @@ -221,7 +226,6 @@ CONFIG_SH_FPU=y # CONFIG_SH_STORE_QUEUES is not set CONFIG_CPU_HAS_INTEVT=y CONFIG_CPU_HAS_SR_RB=y -CONFIG_CPU_HAS_PTEA=y CONFIG_CPU_HAS_FPU=y # @@ -237,9 +241,10 @@ CONFIG_SH_LANDISK=y # # Timer and clock configuration # -CONFIG_SH_TMU=y -CONFIG_SH_TIMER_IRQ=16 +CONFIG_SH_TIMER_TMU=y CONFIG_SH_PCLK_FREQ=33333333 +CONFIG_SH_CLK_CPG=y +CONFIG_SH_CLK_CPG_LEGACY=y # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -281,12 +286,14 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT is not set CONFIG_GUSA=y # CONFIG_GUSA_RB is not set +# CONFIG_SPARSE_IRQ is not set # # Boot options # CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_ENTRY_OFFSET=0x00001000 # CONFIG_UBC_WAKEUP is not set # CONFIG_CMDLINE_BOOL is not set @@ -420,6 +427,7 @@ CONFIG_ATALK=m # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -437,7 +445,11 @@ CONFIG_WIRELESS=y # CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -488,6 +500,7 @@ CONFIG_MISC_DEVICES=y # EEPROM support # # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y @@ -567,10 +580,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -588,6 +597,7 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -596,6 +606,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set @@ -610,7 +621,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_QLOGIC_1280 is not set @@ -649,7 +659,6 @@ CONFIG_MD_RAID1=m # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -698,6 +707,7 @@ CONFIG_8139CP=y # CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set +# CONFIG_KS8842 is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set @@ -895,65 +905,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -CONFIG_VIDEO_DEV=m -CONFIG_VIDEO_V4L2_COMMON=m -CONFIG_VIDEO_ALLOW_V4L1=y -CONFIG_VIDEO_V4L1_COMPAT=y -# CONFIG_DVB_CORE is not set -CONFIG_VIDEO_MEDIA=m - -# -# Multimedia drivers -# -# CONFIG_MEDIA_ATTACH is not set -CONFIG_VIDEO_V4L2=m -CONFIG_VIDEO_V4L1=m -CONFIG_VIDEO_CAPTURE_DRIVERS=y -# CONFIG_VIDEO_ADV_DEBUG is not set -# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set -CONFIG_VIDEO_HELPER_CHIPS_AUTO=y -# CONFIG_VIDEO_VIVI is not set -# CONFIG_VIDEO_CPIA is not set -# CONFIG_VIDEO_CPIA2 is not set -# CONFIG_SOC_CAMERA is not set -CONFIG_V4L_USB_DRIVERS=y -# CONFIG_USB_VIDEO_CLASS is not set -CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y -# CONFIG_USB_GSPCA is not set -# CONFIG_VIDEO_HDPVR is not set -CONFIG_VIDEO_USBVIDEO=m -CONFIG_USB_VICAM=m -CONFIG_USB_IBMCAM=m -CONFIG_USB_KONICAWC=m -# CONFIG_USB_QUICKCAM_MESSENGER is not set -# CONFIG_USB_ET61X251 is not set -CONFIG_USB_OV511=m -CONFIG_USB_SE401=m -CONFIG_USB_SN9C102=m -CONFIG_USB_STV680=m -# CONFIG_USB_ZC0301 is not set -CONFIG_USB_PWC=m -# CONFIG_USB_PWC_DEBUG is not set -CONFIG_USB_PWC_INPUT_EVDEV=y -# CONFIG_USB_ZR364XX is not set -# CONFIG_USB_STKWEBCAM is not set -# CONFIG_USB_S2255 is not set -CONFIG_RADIO_ADAPTERS=y -# CONFIG_RADIO_GEMTEK_PCI is not set -# CONFIG_RADIO_MAXIRADIO is not set -# CONFIG_RADIO_MAESTRO is not set -CONFIG_USB_DSBR=m -# CONFIG_USB_SI470X is not set -# CONFIG_USB_MR800 is not set -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1005,7 +957,7 @@ CONFIG_HID_BELKIN=m CONFIG_HID_CHERRY=m CONFIG_HID_CHICONY=m CONFIG_HID_CYPRESS=m -# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_DRAGONRISE is not set CONFIG_HID_EZKEY=m # CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=m @@ -1022,10 +974,11 @@ CONFIG_HID_PETALYNX=m CONFIG_HID_SAMSUNG=m CONFIG_HID_SONY=m CONFIG_HID_SUNPLUS=m -# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set # CONFIG_HID_TOPSEED is not set -CONFIG_THRUSTMASTER_FF=m -CONFIG_ZEROPLUS_FF=m +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1051,6 +1004,7 @@ CONFIG_USB_MON=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set @@ -1191,10 +1145,15 @@ CONFIG_USB_SISUSBVGA_CON=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set +CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1217,10 +1176,11 @@ CONFIG_REISERFS_FS=y # CONFIG_REISERFS_FS_XATTR is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1383,28 +1343,13 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_SH_STANDARD_BIOS=y # CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_EARLY_PRINTK is not set -# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -1518,3 +1463,4 @@ CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y diff --git a/arch/sh/configs/lboxre2_defconfig b/arch/sh/configs/lboxre2_defconfig index a7db539..c0bc2fd 100644 --- a/arch/sh/configs/lboxre2_defconfig +++ b/arch/sh/configs/lboxre2_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Mon Apr 27 12:48:54 2009 +# Linux kernel version: 2.6.30 +# Thu Jun 18 12:29:50 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -20,6 +20,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_ARCH_SUSPEND_POSSIBLE is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_SYS_SUPPORTS_PCI=y +CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -70,7 +71,6 @@ CONFIG_UID16=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y CONFIG_KALLSYMS_EXTRA_PASS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -83,8 +83,13 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -174,6 +179,7 @@ CONFIG_CPU_SUBTYPE_SH7751R=y CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x04000000 CONFIG_29BIT=y @@ -188,7 +194,6 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set -CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -201,9 +206,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # # Cache configuration @@ -221,7 +226,6 @@ CONFIG_SH_FPU=y # CONFIG_SH_STORE_QUEUES is not set CONFIG_CPU_HAS_INTEVT=y CONFIG_CPU_HAS_SR_RB=y -CONFIG_CPU_HAS_PTEA=y CONFIG_CPU_HAS_FPU=y # @@ -237,9 +241,10 @@ CONFIG_SH_LBOX_RE2=y # # Timer and clock configuration # -CONFIG_SH_TMU=y -CONFIG_SH_TIMER_IRQ=16 +CONFIG_SH_TIMER_TMU=y CONFIG_SH_PCLK_FREQ=40000000 +CONFIG_SH_CLK_CPG=y +CONFIG_SH_CLK_CPG_LEGACY=y # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -281,12 +286,14 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT is not set CONFIG_GUSA=y # CONFIG_GUSA_RB is not set +# CONFIG_SPARSE_IRQ is not set # # Boot options # CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_ENTRY_OFFSET=0x00001000 # CONFIG_UBC_WAKEUP is not set CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttySC1,115200 root=/dev/sda1" @@ -418,6 +425,7 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -435,7 +443,11 @@ CONFIG_WIRELESS=y # CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -485,6 +497,7 @@ CONFIG_MISC_DEVICES=y # EEPROM support # # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -507,10 +520,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -528,6 +537,7 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -536,6 +546,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set @@ -550,7 +561,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -641,7 +651,6 @@ CONFIG_PATA_PLATFORM=y # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -694,6 +703,7 @@ CONFIG_8139TOO_TUNE_TWISTER=y # CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set +# CONFIG_KS8842 is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set @@ -890,22 +900,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -998,9 +993,14 @@ CONFIG_RTC_INTF_DEV=y # on-CPU RTC drivers # # CONFIG_RTC_DRV_SH is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1020,10 +1020,11 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1166,28 +1167,13 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_SH_STANDARD_BIOS=y # CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_EARLY_PRINTK is not set -# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -1301,3 +1287,4 @@ CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y diff --git a/arch/sh/configs/magicpanelr2_defconfig b/arch/sh/configs/magicpanelr2_defconfig index 58bec61..c5859e8 100644 --- a/arch/sh/configs/magicpanelr2_defconfig +++ b/arch/sh/configs/magicpanelr2_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Mon Apr 27 12:49:32 2009 +# Linux kernel version: 2.6.30 +# Thu Jun 18 12:30:31 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -19,6 +19,8 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_ARCH_SUSPEND_POSSIBLE is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_SYS_SUPPORTS_CMT=y +CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -77,7 +79,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -90,7 +91,12 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -180,6 +186,7 @@ CONFIG_CPU_SUBTYPE_SH7720=y CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MEMORY_START=0x0C000000 CONFIG_MEMORY_SIZE=0x03F00000 CONFIG_29BIT=y @@ -194,7 +201,6 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set -CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -207,9 +213,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # # Cache configuration @@ -243,9 +249,11 @@ CONFIG_SH_MAGIC_PANEL_R2_VERSION=3 # # Timer and clock configuration # -CONFIG_SH_TMU=y -CONFIG_SH_TIMER_IRQ=16 +CONFIG_SH_TIMER_TMU=y +CONFIG_SH_TIMER_CMT=y CONFIG_SH_PCLK_FREQ=24000000 +CONFIG_SH_CLK_CPG=y +CONFIG_SH_CLK_CPG_LEGACY=y # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -290,12 +298,14 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT is not set CONFIG_GUSA=y # CONFIG_GUSA_RB is not set +# CONFIG_SPARSE_IRQ is not set # # Boot options # CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_ENTRY_OFFSET=0x00001000 # CONFIG_CMDLINE_BOOL is not set # @@ -372,6 +382,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -389,7 +400,11 @@ CONFIG_WIRELESS=y # CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -528,7 +543,6 @@ CONFIG_HAVE_IDE=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -572,6 +586,7 @@ CONFIG_SMSC911X=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -727,22 +742,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -804,9 +804,14 @@ CONFIG_RTC_INTF_DEV=y # on-CPU RTC drivers # CONFIG_RTC_DRV_SH=y +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -823,12 +828,14 @@ CONFIG_JBD=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set @@ -1012,17 +1019,15 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -1031,6 +1036,7 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set # CONFIG_SH_STANDARD_BIOS is not set CONFIG_EARLY_SCIF_CONSOLE=y CONFIG_EARLY_SCIF_CONSOLE_PORT=0xa4430000 @@ -1039,10 +1045,8 @@ CONFIG_EARLY_PRINTK=y # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_4KSTACKS is not set -# CONFIG_IRQSTACKS is not set CONFIG_DUMP_CODE=y # CONFIG_SH_NO_BSS_INIT is not set -# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -1074,3 +1078,4 @@ CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y diff --git a/arch/sh/configs/microdev_defconfig b/arch/sh/configs/microdev_defconfig index 2886fc8..e5a21e1 100644 --- a/arch/sh/configs/microdev_defconfig +++ b/arch/sh/configs/microdev_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Mon Apr 27 12:50:51 2009 +# Linux kernel version: 2.6.30 +# Thu Jun 18 12:31:56 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -19,6 +19,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_ARCH_SUSPEND_POSSIBLE is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -74,7 +75,6 @@ CONFIG_UID16=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -87,7 +87,12 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -171,6 +176,7 @@ CONFIG_CPU_SUBTYPE_SH4_202=y CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MEMORY_START=0x08000000 CONFIG_MEMORY_SIZE=0x04000000 CONFIG_29BIT=y @@ -185,7 +191,6 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set -CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_HUGETLB_PAGE_SIZE_64K=y # CONFIG_HUGETLB_PAGE_SIZE_256K is not set # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set @@ -204,9 +209,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # # Cache configuration @@ -224,7 +229,6 @@ CONFIG_SH_FPU=y # CONFIG_SH_STORE_QUEUES is not set CONFIG_CPU_HAS_INTEVT=y CONFIG_CPU_HAS_SR_RB=y -CONFIG_CPU_HAS_PTEA=y CONFIG_CPU_HAS_FPU=y # @@ -235,9 +239,10 @@ CONFIG_SH_SH4202_MICRODEV=y # # Timer and clock configuration # -CONFIG_SH_TMU=y -CONFIG_SH_TIMER_IRQ=16 +CONFIG_SH_TIMER_TMU=y CONFIG_SH_PCLK_FREQ=66000000 +CONFIG_SH_CLK_CPG=y +CONFIG_SH_CLK_CPG_LEGACY=y # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -282,12 +287,14 @@ CONFIG_HZ=250 CONFIG_PREEMPT=y CONFIG_GUSA=y # CONFIG_GUSA_RB is not set +# CONFIG_SPARSE_IRQ is not set # # Boot options # CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_ENTRY_OFFSET=0x00001000 # CONFIG_UBC_WAKEUP is not set CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/hda1" @@ -371,6 +378,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -388,7 +396,11 @@ CONFIG_WIRELESS=y # CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -460,7 +472,6 @@ CONFIG_IDE_PROC_FS=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -485,6 +496,7 @@ CONFIG_SMC91X=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set CONFIG_NETDEV_1000=y CONFIG_NETDEV_10000=y @@ -582,22 +594,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -636,10 +633,15 @@ CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -659,10 +661,11 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -812,28 +815,12 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_PREEMPT_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set -# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -957,3 +944,4 @@ CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig index 8ecceb4..0596c2b 100644 --- a/arch/sh/configs/migor_defconfig +++ b/arch/sh/configs/migor_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Mon Apr 27 12:51:34 2009 +# Linux kernel version: 2.6.30 +# Thu Jun 18 12:32:45 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -21,6 +21,7 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_SYS_SUPPORTS_NUMA=y CONFIG_SYS_SUPPORTS_CMT=y +CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -76,7 +77,6 @@ CONFIG_UID16=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -89,14 +89,19 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set CONFIG_PROFILING=y CONFIG_TRACEPOINTS=y -# CONFIG_MARKERS is not set +CONFIG_MARKERS=y CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set @@ -184,6 +189,7 @@ CONFIG_CPU_SUBTYPE_SH7722=y CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x04000000 CONFIG_29BIT=y @@ -202,7 +208,6 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set -CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y # CONFIG_FLATMEM_MANUAL is not set # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -217,9 +222,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # # Cache configuration @@ -238,7 +243,6 @@ CONFIG_SH_DSP=y # CONFIG_SH_STORE_QUEUES is not set CONFIG_CPU_HAS_INTEVT=y CONFIG_CPU_HAS_SR_RB=y -CONFIG_CPU_HAS_PTEA=y CONFIG_CPU_HAS_DSP=y # @@ -252,10 +256,10 @@ CONFIG_SH_MIGOR_QVGA=y # # Timer and clock configuration # -CONFIG_SH_TMU=y +CONFIG_SH_TIMER_TMU=y # CONFIG_SH_TIMER_CMT is not set -CONFIG_SH_TIMER_IRQ=16 CONFIG_SH_PCLK_FREQ=33333333 +CONFIG_SH_CLK_CPG=y # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -296,12 +300,14 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_GUSA=y +# CONFIG_SPARSE_IRQ is not set # # Boot options # CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ip=on root=/dev/nfs ip=dhcp" @@ -384,6 +390,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -403,7 +410,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -534,6 +545,7 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -557,10 +569,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -577,6 +585,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_LIBFC is not set # CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set @@ -585,7 +594,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -610,6 +618,7 @@ CONFIG_SMC91X=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -740,7 +749,6 @@ CONFIG_I2C_SH_MOBILE=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -796,57 +804,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -CONFIG_VIDEO_DEV=y -CONFIG_VIDEO_V4L2_COMMON=y -# CONFIG_VIDEO_ALLOW_V4L1 is not set -CONFIG_VIDEO_V4L1_COMPAT=y -# CONFIG_DVB_CORE is not set -CONFIG_VIDEO_MEDIA=y - -# -# Multimedia drivers -# -# CONFIG_MEDIA_ATTACH is not set -CONFIG_MEDIA_TUNER=y -# CONFIG_MEDIA_TUNER_CUSTOMISE is not set -CONFIG_MEDIA_TUNER_SIMPLE=y -CONFIG_MEDIA_TUNER_TDA8290=y -CONFIG_MEDIA_TUNER_TDA9887=y -CONFIG_MEDIA_TUNER_TEA5761=y -CONFIG_MEDIA_TUNER_TEA5767=y -CONFIG_MEDIA_TUNER_MT20XX=y -CONFIG_MEDIA_TUNER_XC2028=y -CONFIG_MEDIA_TUNER_XC5000=y -CONFIG_MEDIA_TUNER_MC44S803=y -CONFIG_VIDEO_V4L2=y -CONFIG_VIDEOBUF_GEN=y -CONFIG_VIDEOBUF_DMA_CONTIG=y -CONFIG_VIDEO_CAPTURE_DRIVERS=y -# CONFIG_VIDEO_ADV_DEBUG is not set -# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set -CONFIG_VIDEO_HELPER_CHIPS_AUTO=y -# CONFIG_VIDEO_VIVI is not set -# CONFIG_VIDEO_SAA5246A is not set -# CONFIG_VIDEO_SAA5249 is not set -CONFIG_SOC_CAMERA=y -# CONFIG_SOC_CAMERA_MT9M001 is not set -# CONFIG_SOC_CAMERA_MT9M111 is not set -# CONFIG_SOC_CAMERA_MT9T031 is not set -# CONFIG_SOC_CAMERA_MT9V022 is not set -CONFIG_SOC_CAMERA_TW9910=y -# CONFIG_SOC_CAMERA_PLATFORM is not set -CONFIG_SOC_CAMERA_OV772X=y -CONFIG_VIDEO_SH_MOBILE_CEU=y -# CONFIG_RADIO_ADAPTERS is not set -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -899,6 +857,7 @@ CONFIG_USB_GADGET_SELECTED=y # CONFIG_USB_GADGET_OMAP is not set # CONFIG_USB_GADGET_PXA25X is not set # CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C_HSOTG is not set # CONFIG_USB_GADGET_S3C2410 is not set # CONFIG_USB_GADGET_IMX is not set CONFIG_USB_GADGET_M66592=y @@ -909,9 +868,11 @@ CONFIG_SUPERH_BUILT_IN_M66592=y # CONFIG_USB_GADGET_CI13XXX is not set # CONFIG_USB_GADGET_NET2280 is not set # CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LANGWELL is not set # CONFIG_USB_GADGET_DUMMY_HCD is not set CONFIG_USB_GADGET_DUALSPEED=y # CONFIG_USB_ZERO is not set +# CONFIG_USB_AUDIO is not set # CONFIG_USB_ETH is not set # CONFIG_USB_GADGETFS is not set # CONFIG_USB_FILE_STORAGE is not set @@ -983,6 +944,7 @@ CONFIG_RTC_DRV_RS5C372=y # on-CPU RTC drivers # CONFIG_RTC_DRV_SH=y +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set CONFIG_UIO=y @@ -990,6 +952,10 @@ CONFIG_UIO=y CONFIG_UIO_PDRV_GENIRQ=y # CONFIG_UIO_SMX is not set # CONFIG_UIO_SERCOS3 is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1001,12 +967,14 @@ CONFIG_UIO_PDRV_GENIRQ=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set @@ -1111,24 +1079,11 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_RING_BUFFER=y +CONFIG_EVENT_TRACING=y +CONFIG_CONTEXT_SWITCH_TRACER=y CONFIG_TRACING=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_FTRACE is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set @@ -1137,7 +1092,6 @@ CONFIG_HAVE_ARCH_KGDB=y CONFIG_EARLY_SCIF_CONSOLE=y CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe00000 CONFIG_EARLY_PRINTK=y -# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -1259,3 +1213,4 @@ CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y diff --git a/arch/sh/configs/polaris_defconfig b/arch/sh/configs/polaris_defconfig index 2b95072..67edd3f 100644 --- a/arch/sh/configs/polaris_defconfig +++ b/arch/sh/configs/polaris_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Mon Apr 27 12:52:19 2009 +# Linux kernel version: 2.6.30 +# Thu Jun 18 12:33:28 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -19,6 +19,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_ARCH_SUSPEND_POSSIBLE is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -78,7 +79,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -91,7 +91,12 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -181,6 +186,7 @@ CONFIG_CPU_SUBTYPE_SH7709=y CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MEMORY_START=0x0C000000 CONFIG_MEMORY_SIZE=0x04000000 CONFIG_29BIT=y @@ -195,7 +201,6 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set -CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -208,9 +213,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # # Cache configuration @@ -240,9 +245,10 @@ CONFIG_SH_POLARIS=y # # Timer and clock configuration # -CONFIG_SH_TMU=y -CONFIG_SH_TIMER_IRQ=16 +CONFIG_SH_TIMER_TMU=y CONFIG_SH_PCLK_FREQ=33000000 +CONFIG_SH_CLK_CPG=y +CONFIG_SH_CLK_CPG_LEGACY=y CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y @@ -288,12 +294,14 @@ CONFIG_SCHED_HRTICK=y CONFIG_PREEMPT=y CONFIG_GUSA=y # CONFIG_GUSA_RB is not set +# CONFIG_SPARSE_IRQ is not set # # Boot options # CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttySC1,115200 root=/dev/mtdblock2 rootfstype=jffs2 mem=63M mtdparts=physmap-flash.0:0x00100000(bootloader)ro,0x00500000(Kernel)ro,0x00A00000(Filesystem)" @@ -369,6 +377,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -522,7 +531,6 @@ CONFIG_HAVE_IDE=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -566,6 +574,7 @@ CONFIG_SMSC911X=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -678,22 +687,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -756,9 +750,14 @@ CONFIG_RTC_INTF_DEV=y # on-CPU RTC drivers # CONFIG_RTC_DRV_SH=y +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -770,12 +769,14 @@ CONFIG_RTC_DRV_SH=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set @@ -928,18 +929,16 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -948,6 +947,7 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set # CONFIG_SH_STANDARD_BIOS is not set CONFIG_EARLY_SCIF_CONSOLE=y CONFIG_EARLY_SCIF_CONSOLE_PORT=0x00000000 @@ -956,10 +956,8 @@ CONFIG_EARLY_PRINTK=y # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_4KSTACKS is not set -# CONFIG_IRQSTACKS is not set CONFIG_DUMP_CODE=y # CONFIG_SH_NO_BSS_INIT is not set -# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -990,3 +988,4 @@ CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y diff --git a/arch/sh/configs/r7780mp_defconfig b/arch/sh/configs/r7780mp_defconfig index d393d9e..107a8e3 100644 --- a/arch/sh/configs/r7780mp_defconfig +++ b/arch/sh/configs/r7780mp_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.30 -# Tue Jun 16 16:08:44 2009 +# Thu Jun 18 12:34:44 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -80,7 +80,6 @@ CONFIG_UID16=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -99,6 +98,7 @@ CONFIG_AIO=y # CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -227,7 +227,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 @@ -413,6 +412,7 @@ CONFIG_LLC=m # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -432,7 +432,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -570,7 +574,9 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set CONFIG_EEPROM_93CX6=y +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -722,7 +728,6 @@ CONFIG_PATA_PLATFORM=y # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -776,6 +781,7 @@ CONFIG_8139TOO_8129=y # CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set +# CONFIG_KS8842 is not set CONFIG_VIA_RHINE=m CONFIG_VIA_RHINE_MMIO=y # CONFIG_SC92031 is not set @@ -984,7 +990,6 @@ CONFIG_I2C_HIGHLANDER=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1043,6 +1048,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1078,22 +1084,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1205,6 +1196,10 @@ CONFIG_RTC_DRV_SH=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1225,10 +1220,10 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -1579,3 +1574,4 @@ CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y diff --git a/arch/sh/configs/r7785rp_defconfig b/arch/sh/configs/r7785rp_defconfig index 82658f6..8a3dc30 100644 --- a/arch/sh/configs/r7785rp_defconfig +++ b/arch/sh/configs/r7785rp_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Mon Apr 27 12:55:10 2009 +# Linux kernel version: 2.6.30 +# Thu Jun 18 12:37:20 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -21,6 +21,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_SYS_SUPPORTS_NUMA=y CONFIG_SYS_SUPPORTS_PCI=y +CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -80,7 +81,6 @@ CONFIG_UID16=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -93,15 +93,20 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set CONFIG_PROFILING=y CONFIG_TRACEPOINTS=y -# CONFIG_MARKERS is not set +CONFIG_MARKERS=y CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y @@ -189,6 +194,7 @@ CONFIG_CPU_SUBTYPE_SH7785=y CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MEMORY_START=0x08000000 CONFIG_MEMORY_SIZE=0x08000000 # CONFIG_29BIT is not set @@ -211,7 +217,6 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set -CONFIG_ENTRY_OFFSET=0x00001000 # CONFIG_HUGETLB_PAGE_SIZE_64K is not set # CONFIG_HUGETLB_PAGE_SIZE_256K is not set CONFIG_HUGETLB_PAGE_SIZE_1MB=y @@ -232,9 +237,9 @@ CONFIG_MIGRATION=y # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # # Cache configuration @@ -252,7 +257,6 @@ CONFIG_SH_FPU=y CONFIG_SH_STORE_QUEUES=y CONFIG_CPU_HAS_INTEVT=y CONFIG_CPU_HAS_SR_RB=y -CONFIG_CPU_HAS_PTEA=y CONFIG_CPU_HAS_FPU=y # @@ -267,9 +271,9 @@ CONFIG_SH_R7785RP=y # # Timer and clock configuration # -CONFIG_SH_TMU=y -CONFIG_SH_TIMER_IRQ=28 +CONFIG_SH_TIMER_TMU=y CONFIG_SH_PCLK_FREQ=33333333 +CONFIG_SH_CLK_CPG=y CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y @@ -326,12 +330,14 @@ CONFIG_KEXEC=y # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y CONFIG_GUSA=y +# CONFIG_SPARSE_IRQ is not set # # Boot options # CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1" @@ -429,6 +435,7 @@ CONFIG_LLC=m # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -449,7 +456,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -503,7 +514,9 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set CONFIG_EEPROM_93CX6=y +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -526,10 +539,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_BLK_DEV_SR is not set CONFIG_CHR_DEV_SG=m # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -547,6 +556,7 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -555,6 +565,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set @@ -569,7 +580,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -658,7 +668,6 @@ CONFIG_PATA_PLATFORM=y # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -692,6 +701,7 @@ CONFIG_AX88796_93CX6=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -899,7 +909,6 @@ CONFIG_I2C_HIGHLANDER=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -983,6 +992,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1019,22 +1029,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1195,9 +1190,14 @@ CONFIG_RTC_DRV_RS5C372=y # on-CPU RTC drivers # CONFIG_RTC_DRV_SH=y +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1218,10 +1218,11 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1229,6 +1230,7 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set CONFIG_FUSE_FS=m +# CONFIG_CUSE is not set # # Caches @@ -1413,25 +1415,25 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_RING_BUFFER=y +CONFIG_EVENT_TRACING=y +CONFIG_CONTEXT_SWITCH_TRACER=y CONFIG_TRACING=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_RING_BUFFER_BENCHMARK is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set @@ -1444,10 +1446,8 @@ CONFIG_EARLY_PRINTK=y CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACK_USAGE=y CONFIG_4KSTACKS=y -# CONFIG_IRQSTACKS is not set CONFIG_DUMP_CODE=y # CONFIG_SH_NO_BSS_INIT is not set -# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -1572,3 +1572,4 @@ CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y diff --git a/arch/sh/configs/rsk7201_defconfig b/arch/sh/configs/rsk7201_defconfig index fa43957..55c3656 100644 --- a/arch/sh/configs/rsk7201_defconfig +++ b/arch/sh/configs/rsk7201_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Mon Apr 27 12:56:29 2009 +# Linux kernel version: 2.6.30 +# Thu Jun 18 12:39:54 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -15,10 +15,11 @@ CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y # CONFIG_GENERIC_GPIO is not set -# CONFIG_GENERIC_TIME is not set -# CONFIG_GENERIC_CLOCKEVENTS is not set +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_ARCH_SUSPEND_POSSIBLE is not set # CONFIG_ARCH_HIBERNATION_POSSIBLE is not set +CONFIG_SYS_SUPPORTS_MTU2=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -74,7 +75,6 @@ CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -86,14 +86,19 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y # CONFIG_AIO is not set + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set # CONFIG_SLUB is not set CONFIG_SLOB=y CONFIG_PROFILING=y CONFIG_TRACEPOINTS=y -# CONFIG_MARKERS is not set +CONFIG_MARKERS=y CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set @@ -175,6 +180,7 @@ CONFIG_CPU_SUBTYPE_SH7201=y # CONFIG_QUICKLIST=y CONFIG_PAGE_OFFSET=0x00000000 +CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_MEMORY_START=0x08000000 CONFIG_MEMORY_SIZE=0x01000000 CONFIG_29BIT=y @@ -188,7 +194,6 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set -CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -201,7 +206,8 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_UNEVICTABLE_LRU=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_NOMMU_INITIAL_TRIM_EXCESS=1 # # Cache configuration @@ -228,10 +234,14 @@ CONFIG_SH_RSK7201=y # # Timer and clock configuration # -CONFIG_SH_MTU2=y -CONFIG_SH_TIMER_IRQ=16 +CONFIG_SH_TIMER_MTU2=y CONFIG_SH_PCLK_FREQ=40000000 +CONFIG_SH_CLK_CPG=y +CONFIG_SH_CLK_CPG_LEGACY=y CONFIG_SH_CLK_MD=0 +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # # CPU Frequency scaling @@ -267,12 +277,14 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_GUSA=y +# CONFIG_SPARSE_IRQ is not set # # Boot options # CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ignore_loglevel" @@ -506,21 +518,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -578,9 +576,14 @@ CONFIG_RTC_INTF_DEV=y # on-CPU RTC drivers # CONFIG_RTC_DRV_SH=y +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -593,11 +596,13 @@ CONFIG_EXT2_FS=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -# CONFIG_FILE_LOCKING is not set # CONFIG_XFS_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_FILE_LOCKING is not set +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set @@ -696,30 +701,17 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_RING_BUFFER=y +CONFIG_EVENT_TRACING=y +CONFIG_CONTEXT_SWITCH_TRACER=y CONFIG_TRACING=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_FTRACE is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set -# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -749,3 +741,4 @@ CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_GENERIC_ATOMIC64=y diff --git a/arch/sh/configs/rsk7203_defconfig b/arch/sh/configs/rsk7203_defconfig index e3a65f8..69e6199 100644 --- a/arch/sh/configs/rsk7203_defconfig +++ b/arch/sh/configs/rsk7203_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Mon Apr 27 12:57:06 2009 +# Linux kernel version: 2.6.30 +# Thu Jun 18 12:40:44 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -15,11 +15,12 @@ CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_GPIO=y -# CONFIG_GENERIC_TIME is not set -# CONFIG_GENERIC_CLOCKEVENTS is not set +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_ARCH_SUSPEND_POSSIBLE is not set # CONFIG_ARCH_HIBERNATION_POSSIBLE is not set CONFIG_SYS_SUPPORTS_CMT=y +CONFIG_SYS_SUPPORTS_MTU2=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -81,7 +82,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -93,14 +93,19 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_AIO=y + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set # CONFIG_SLUB is not set CONFIG_SLOB=y CONFIG_PROFILING=y CONFIG_TRACEPOINTS=y -# CONFIG_MARKERS is not set +CONFIG_MARKERS=y CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set @@ -182,6 +187,7 @@ CONFIG_CPU_SUBTYPE_SH7203=y # CONFIG_QUICKLIST=y CONFIG_PAGE_OFFSET=0x00000000 +CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x01000000 CONFIG_29BIT=y @@ -195,7 +201,6 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set -CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -208,7 +213,8 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_UNEVICTABLE_LRU=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_NOMMU_INITIAL_TRIM_EXCESS=1 # # Cache configuration @@ -235,11 +241,15 @@ CONFIG_SH_RSK7203=y # # Timer and clock configuration # -CONFIG_SH_CMT=y -# CONFIG_SH_MTU2 is not set -CONFIG_SH_TIMER_IRQ=142 +CONFIG_SH_TIMER_CMT=y +CONFIG_SH_TIMER_MTU2=y CONFIG_SH_PCLK_FREQ=16670800 +CONFIG_SH_CLK_CPG=y +CONFIG_SH_CLK_CPG_LEGACY=y CONFIG_SH_CLK_MD=0 +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # # CPU Frequency scaling @@ -290,12 +300,14 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_GUSA=y +# CONFIG_SPARSE_IRQ is not set # # Boot options # CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ignore_loglevel" @@ -375,6 +387,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -393,7 +406,11 @@ CONFIG_WIRELESS=y # CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -528,7 +545,6 @@ CONFIG_HAVE_IDE=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -572,6 +588,7 @@ CONFIG_SMSC911X=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -705,24 +722,9 @@ CONFIG_REGULATOR=y # CONFIG_REGULATOR_DEBUG is not set # CONFIG_REGULATOR_FIXED_VOLTAGE is not set # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set # CONFIG_REGULATOR_BQ24022 is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -758,7 +760,7 @@ CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y -# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_DRAGONRISE is not set CONFIG_HID_EZKEY=y # CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y @@ -775,10 +777,11 @@ CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y -# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set # CONFIG_HID_TOPSEED is not set -CONFIG_THRUSTMASTER_FF=m -CONFIG_ZEROPLUS_FF=m +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set @@ -931,9 +934,14 @@ CONFIG_RTC_INTF_DEV=y # on-CPU RTC drivers # CONFIG_RTC_DRV_SH=y +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -945,12 +953,14 @@ CONFIG_RTC_DRV_SH=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set @@ -1029,7 +1039,46 @@ CONFIG_SUNRPC=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y -# CONFIG_NLS is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set # @@ -1094,23 +1143,24 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_RING_BUFFER=y +CONFIG_EVENT_TRACING=y +CONFIG_CONTEXT_SWITCH_TRACER=y CONFIG_TRACING=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_RING_BUFFER_BENCHMARK is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set @@ -1123,10 +1173,8 @@ CONFIG_EARLY_PRINTK=y CONFIG_DEBUG_BOOTMEM=y CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACK_USAGE=y -# CONFIG_IRQSTACKS is not set CONFIG_DUMP_CODE=y # CONFIG_SH_NO_BSS_INIT is not set -# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -1156,3 +1204,4 @@ CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y diff --git a/arch/sh/configs/rts7751r2d1_defconfig b/arch/sh/configs/rts7751r2d1_defconfig index a4a59f6..c6e9b1c 100644 --- a/arch/sh/configs/rts7751r2d1_defconfig +++ b/arch/sh/configs/rts7751r2d1_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Mon Apr 27 12:58:13 2009 +# Linux kernel version: 2.6.30 +# Thu Jun 18 12:42:26 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -20,6 +20,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_ARCH_SUSPEND_POSSIBLE is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_SYS_SUPPORTS_PCI=y +CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -71,7 +72,6 @@ CONFIG_UID16=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -84,15 +84,20 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set CONFIG_PROFILING=y CONFIG_TRACEPOINTS=y -# CONFIG_MARKERS is not set +CONFIG_MARKERS=y CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set @@ -176,6 +181,7 @@ CONFIG_CPU_SUBTYPE_SH7751R=y CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x04000000 CONFIG_29BIT=y @@ -190,7 +196,6 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set -CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -203,9 +208,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # # Cache configuration @@ -223,7 +228,6 @@ CONFIG_SH_FPU=y # CONFIG_SH_STORE_QUEUES is not set CONFIG_CPU_HAS_INTEVT=y CONFIG_CPU_HAS_SR_RB=y -CONFIG_CPU_HAS_PTEA=y CONFIG_CPU_HAS_FPU=y # @@ -245,9 +249,10 @@ CONFIG_RTS7751R2D_1=y # # Timer and clock configuration # -CONFIG_SH_TMU=y -CONFIG_SH_TIMER_IRQ=16 +CONFIG_SH_TIMER_TMU=y CONFIG_SH_PCLK_FREQ=60000000 +CONFIG_SH_CLK_CPG=y +CONFIG_SH_CLK_CPG_LEGACY=y # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -289,12 +294,14 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT is not set CONFIG_GUSA=y # CONFIG_GUSA_RB is not set +# CONFIG_SPARSE_IRQ is not set # # Boot options # CONFIG_ZERO_PAGE_OFFSET=0x00010000 CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_ENTRY_OFFSET=0x00001000 # CONFIG_UBC_WAKEUP is not set CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=tty0 console=ttySC0,115200 root=/dev/sda1 earlyprintk=serial" @@ -385,6 +392,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -404,7 +412,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -455,6 +467,7 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT25 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -477,10 +490,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -498,6 +507,7 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -506,6 +516,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set @@ -520,7 +531,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -609,7 +619,6 @@ CONFIG_PATA_PLATFORM=y # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -663,6 +672,7 @@ CONFIG_8139TOO=y # CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set +# CONFIG_KS8842 is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set @@ -871,23 +881,7 @@ CONFIG_MFD_SM501=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -989,6 +983,11 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set CONFIG_SND_VMASTER=y +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set CONFIG_SND_MPU401_UART=m CONFIG_SND_OPL3_LIB=m CONFIG_SND_AC97_CODEC=m @@ -1015,6 +1014,7 @@ CONFIG_SND_PCI=y # CONFIG_SND_OXYGEN is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set +# CONFIG_SND_CTXFI is not set # CONFIG_SND_DARLA20 is not set # CONFIG_SND_GINA20 is not set # CONFIG_SND_LAYLA20 is not set @@ -1045,6 +1045,7 @@ CONFIG_SND_PCI=y # CONFIG_SND_INTEL8X0 is not set # CONFIG_SND_INTEL8X0M is not set # CONFIG_SND_KORG1212 is not set +# CONFIG_SND_LX6464ES is not set # CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_MIXART is not set # CONFIG_SND_NM256 is not set @@ -1089,7 +1090,7 @@ CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y -# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_DRAGONRISE is not set CONFIG_HID_EZKEY=y # CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y @@ -1106,10 +1107,11 @@ CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y -# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set # CONFIG_HID_TOPSEED is not set -CONFIG_THRUSTMASTER_FF=m -CONFIG_ZEROPLUS_FF=m +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1135,6 +1137,7 @@ CONFIG_USB_DEVICE_CLASS=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set # CONFIG_USB_EHCI_HCD is not set # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set @@ -1268,9 +1271,14 @@ CONFIG_RTC_DRV_R9701=y # on-CPU RTC drivers # # CONFIG_RTC_DRV_SH is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1284,10 +1292,11 @@ CONFIG_EXT2_FS=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1428,24 +1437,11 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_RING_BUFFER=y +CONFIG_EVENT_TRACING=y +CONFIG_CONTEXT_SWITCH_TRACER=y CONFIG_TRACING=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_FTRACE is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set @@ -1454,7 +1450,6 @@ CONFIG_HAVE_ARCH_KGDB=y CONFIG_EARLY_SCIF_CONSOLE=y CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe80000 CONFIG_EARLY_PRINTK=y -# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -1568,3 +1563,4 @@ CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y diff --git a/arch/sh/configs/rts7751r2dplus_defconfig b/arch/sh/configs/rts7751r2dplus_defconfig index a860435..bc10469d 100644 --- a/arch/sh/configs/rts7751r2dplus_defconfig +++ b/arch/sh/configs/rts7751r2dplus_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Mon Apr 27 12:59:01 2009 +# Linux kernel version: 2.6.30 +# Thu Jun 18 12:43:19 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -20,6 +20,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_ARCH_SUSPEND_POSSIBLE is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_SYS_SUPPORTS_PCI=y +CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -71,7 +72,6 @@ CONFIG_UID16=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -84,15 +84,20 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set CONFIG_PROFILING=y CONFIG_TRACEPOINTS=y -# CONFIG_MARKERS is not set +CONFIG_MARKERS=y CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set @@ -176,6 +181,7 @@ CONFIG_CPU_SUBTYPE_SH7751R=y CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x04000000 CONFIG_29BIT=y @@ -190,7 +196,6 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set -CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -203,9 +208,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # # Cache configuration @@ -223,7 +228,6 @@ CONFIG_SH_FPU=y # CONFIG_SH_STORE_QUEUES is not set CONFIG_CPU_HAS_INTEVT=y CONFIG_CPU_HAS_SR_RB=y -CONFIG_CPU_HAS_PTEA=y CONFIG_CPU_HAS_FPU=y # @@ -245,9 +249,10 @@ CONFIG_RTS7751R2D_PLUS=y # # Timer and clock configuration # -CONFIG_SH_TMU=y -CONFIG_SH_TIMER_IRQ=16 +CONFIG_SH_TIMER_TMU=y CONFIG_SH_PCLK_FREQ=60000000 +CONFIG_SH_CLK_CPG=y +CONFIG_SH_CLK_CPG_LEGACY=y # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -289,12 +294,14 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT is not set CONFIG_GUSA=y # CONFIG_GUSA_RB is not set +# CONFIG_SPARSE_IRQ is not set # # Boot options # CONFIG_ZERO_PAGE_OFFSET=0x00010000 CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_ENTRY_OFFSET=0x00001000 # CONFIG_UBC_WAKEUP is not set CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=tty0 console=ttySC0,115200 root=/dev/sda1 earlyprintk=serial" @@ -385,6 +392,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -404,7 +412,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -540,6 +552,7 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT25 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -562,10 +575,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -583,6 +592,7 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -591,6 +601,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set @@ -605,7 +616,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -694,7 +704,6 @@ CONFIG_PATA_PLATFORM=y # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -748,6 +757,7 @@ CONFIG_8139TOO=y # CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set +# CONFIG_KS8842 is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set @@ -956,23 +966,7 @@ CONFIG_MFD_SM501=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1074,6 +1068,11 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set CONFIG_SND_VMASTER=y +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set CONFIG_SND_MPU401_UART=m CONFIG_SND_OPL3_LIB=m CONFIG_SND_AC97_CODEC=m @@ -1100,6 +1099,7 @@ CONFIG_SND_PCI=y # CONFIG_SND_OXYGEN is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set +# CONFIG_SND_CTXFI is not set # CONFIG_SND_DARLA20 is not set # CONFIG_SND_GINA20 is not set # CONFIG_SND_LAYLA20 is not set @@ -1130,6 +1130,7 @@ CONFIG_SND_PCI=y # CONFIG_SND_INTEL8X0 is not set # CONFIG_SND_INTEL8X0M is not set # CONFIG_SND_KORG1212 is not set +# CONFIG_SND_LX6464ES is not set # CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_MIXART is not set # CONFIG_SND_NM256 is not set @@ -1174,7 +1175,7 @@ CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y -# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_DRAGONRISE is not set CONFIG_HID_EZKEY=y # CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y @@ -1191,10 +1192,11 @@ CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y -# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set # CONFIG_HID_TOPSEED is not set -CONFIG_THRUSTMASTER_FF=m -CONFIG_ZEROPLUS_FF=m +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1220,6 +1222,7 @@ CONFIG_USB_DEVICE_CLASS=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set # CONFIG_USB_EHCI_HCD is not set # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set @@ -1353,9 +1356,14 @@ CONFIG_RTC_DRV_R9701=y # on-CPU RTC drivers # # CONFIG_RTC_DRV_SH is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1369,10 +1377,11 @@ CONFIG_EXT2_FS=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1423,6 +1432,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1513,24 +1523,11 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_RING_BUFFER=y +CONFIG_EVENT_TRACING=y +CONFIG_CONTEXT_SWITCH_TRACER=y CONFIG_TRACING=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_FTRACE is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set @@ -1539,7 +1536,6 @@ CONFIG_HAVE_ARCH_KGDB=y CONFIG_EARLY_SCIF_CONSOLE=y CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe80000 CONFIG_EARLY_PRINTK=y -# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -1653,3 +1649,4 @@ CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y diff --git a/arch/sh/configs/sdk7780_defconfig b/arch/sh/configs/sdk7780_defconfig index a629b79..753fb27 100644 --- a/arch/sh/configs/sdk7780_defconfig +++ b/arch/sh/configs/sdk7780_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Mon Apr 27 12:59:32 2009 +# Linux kernel version: 2.6.30 +# Thu Jun 18 12:43:54 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -20,6 +20,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_ARCH_SUSPEND_POSSIBLE is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_SYS_SUPPORTS_PCI=y +CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -75,7 +76,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -88,9 +88,14 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -181,6 +186,7 @@ CONFIG_CPU_SUBTYPE_SH7780=y CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MEMORY_START=0x08000000 CONFIG_MEMORY_SIZE=0x08000000 # CONFIG_29BIT is not set @@ -199,7 +205,6 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set -CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_HUGETLB_PAGE_SIZE_64K=y # CONFIG_HUGETLB_PAGE_SIZE_256K is not set # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set @@ -218,9 +223,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # # Cache configuration @@ -252,9 +257,10 @@ CONFIG_SH_SDK7780_BASE=y # # Timer and clock configuration # -CONFIG_SH_TMU=y -CONFIG_SH_TIMER_IRQ=28 +CONFIG_SH_TIMER_TMU=y CONFIG_SH_PCLK_FREQ=33333333 +CONFIG_SH_CLK_CPG=y +CONFIG_SH_CLK_CPG_LEGACY=y CONFIG_TICK_ONESHOT=y # CONFIG_NO_HZ is not set CONFIG_HIGH_RES_TIMERS=y @@ -300,12 +306,14 @@ CONFIG_SCHED_HRTICK=y # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y CONFIG_GUSA=y +# CONFIG_SPARSE_IRQ is not set # # Boot options # CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x01800000 +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="mem=128M console=tty0 console=ttySC0,115200 ip=bootp root=/dev/nfs nfsroot=192.168.0.1:/home/rootfs" @@ -441,6 +449,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set CONFIG_NET_SCHED=y # @@ -490,7 +499,11 @@ CONFIG_WIRELESS=y # CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -613,10 +626,6 @@ CONFIG_BLK_DEV_SR=y # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -633,6 +642,7 @@ CONFIG_SCSI_FC_ATTRS=y # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -641,6 +651,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set @@ -655,7 +666,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -756,7 +766,6 @@ CONFIG_BLK_DEV_DM=y # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -789,6 +798,7 @@ CONFIG_SMC91X=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_NET_POCKET is not set # CONFIG_ATL2 is not set # CONFIG_NETDEV_1000 is not set @@ -971,22 +981,7 @@ CONFIG_SSB_DRIVER_PCICORE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1100,7 +1095,7 @@ CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y -# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_DRAGONRISE is not set CONFIG_HID_EZKEY=y # CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y @@ -1117,10 +1112,11 @@ CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y -# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set # CONFIG_HID_TOPSEED is not set -CONFIG_THRUSTMASTER_FF=m -CONFIG_ZEROPLUS_FF=m +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1146,6 +1142,7 @@ CONFIG_USB_MON=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set @@ -1247,10 +1244,15 @@ CONFIG_LEDS_CLASS=y # CONFIG_LEDS_TRIGGERS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set +CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1272,11 +1274,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1471,18 +1474,16 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -1498,10 +1499,8 @@ CONFIG_SH_STANDARD_BIOS=y CONFIG_DEBUG_STACKOVERFLOW=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_4KSTACKS is not set -# CONFIG_IRQSTACKS is not set CONFIG_DUMP_CODE=y # CONFIG_SH_NO_BSS_INIT is not set -# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -1619,3 +1618,4 @@ CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y diff --git a/arch/sh/configs/se7206_defconfig b/arch/sh/configs/se7206_defconfig index 5caf85a..8dd2f13 100644 --- a/arch/sh/configs/se7206_defconfig +++ b/arch/sh/configs/se7206_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Mon Apr 27 13:01:02 2009 +# Linux kernel version: 2.6.30 +# Thu Jun 18 12:46:15 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -15,11 +15,12 @@ CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y # CONFIG_GENERIC_GPIO is not set -# CONFIG_GENERIC_TIME is not set -# CONFIG_GENERIC_CLOCKEVENTS is not set +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_ARCH_SUSPEND_POSSIBLE is not set # CONFIG_ARCH_HIBERNATION_POSSIBLE is not set CONFIG_SYS_SUPPORTS_CMT=y +CONFIG_SYS_SUPPORTS_MTU2=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -47,6 +48,7 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_TASKSTATS is not set CONFIG_AUDIT=y CONFIG_AUDITSYSCALL=y +CONFIG_AUDIT_TREE=y # # RCU Subsystem @@ -92,7 +94,6 @@ CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -104,14 +105,19 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_AIO=y + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_COMPAT_BRK is not set # CONFIG_SLAB is not set # CONFIG_SLUB is not set CONFIG_SLOB=y CONFIG_PROFILING=y CONFIG_TRACEPOINTS=y -# CONFIG_MARKERS is not set +CONFIG_MARKERS=y CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set @@ -194,6 +200,7 @@ CONFIG_CPU_SUBTYPE_SH7206=y # CONFIG_QUICKLIST=y CONFIG_PAGE_OFFSET=0x00000000 +CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x04000000 CONFIG_29BIT=y @@ -207,7 +214,6 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set -CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -220,7 +226,8 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_UNEVICTABLE_LRU=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_NOMMU_INITIAL_TRIM_EXCESS=1 # # Cache configuration @@ -245,11 +252,15 @@ CONFIG_SH_7206_SOLUTION_ENGINE=y # # Timer and clock configuration # -CONFIG_SH_CMT=y -# CONFIG_SH_MTU2 is not set -CONFIG_SH_TIMER_IRQ=140 +CONFIG_SH_TIMER_CMT=y +CONFIG_SH_TIMER_MTU2=y CONFIG_SH_PCLK_FREQ=33333333 +CONFIG_SH_CLK_CPG=y +CONFIG_SH_CLK_CPG_LEGACY=y CONFIG_SH_CLK_MD=6 +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # # CPU Frequency scaling @@ -300,12 +311,14 @@ CONFIG_HZ=1000 # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y CONFIG_GUSA=y +# CONFIG_SPARSE_IRQ is not set # # Boot options # CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttySC3,115200 ignore_loglevel earlyprintk=serial" @@ -390,6 +403,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -408,7 +422,11 @@ CONFIG_WIRELESS=y # CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -543,7 +561,6 @@ CONFIG_HAVE_IDE=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -568,6 +585,7 @@ CONFIG_SMC91X=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -650,22 +668,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -722,9 +725,14 @@ CONFIG_RTC_INTF_DEV=y # on-CPU RTC drivers # CONFIG_RTC_DRV_SH=y +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -737,12 +745,14 @@ CONFIG_EXT2_FS=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set -# CONFIG_INOTIFY is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set @@ -884,23 +894,25 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_RING_BUFFER=y +CONFIG_EVENT_TRACING=y +CONFIG_CONTEXT_SWITCH_TRACER=y CONFIG_TRACING=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_RING_BUFFER_BENCHMARK is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set @@ -911,10 +923,8 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_BOOTMEM is not set CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACK_USAGE=y -# CONFIG_IRQSTACKS is not set CONFIG_DUMP_CODE=y # CONFIG_SH_NO_BSS_INIT is not set -# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -1037,3 +1047,4 @@ CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y diff --git a/arch/sh/configs/se7343_defconfig b/arch/sh/configs/se7343_defconfig index 004d531..18f46de 100644 --- a/arch/sh/configs/se7343_defconfig +++ b/arch/sh/configs/se7343_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Mon Apr 27 13:01:44 2009 +# Linux kernel version: 2.6.30 +# Thu Jun 18 12:47:07 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -20,6 +20,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_SYS_SUPPORTS_CMT=y +CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -75,7 +76,6 @@ CONFIG_UID16=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -88,7 +88,12 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y # CONFIG_SHMEM is not set CONFIG_AIO=y + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -180,6 +185,7 @@ CONFIG_CPU_SUBTYPE_SH7343=y CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x01000000 CONFIG_29BIT=y @@ -194,7 +200,6 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set -CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -207,9 +212,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # # Cache configuration @@ -239,10 +244,10 @@ CONFIG_SH_7343_SOLUTION_ENGINE=y # # Timer and clock configuration # -CONFIG_SH_TMU=y +CONFIG_SH_TIMER_TMU=y # CONFIG_SH_TIMER_CMT is not set -CONFIG_SH_TIMER_IRQ=16 CONFIG_SH_PCLK_FREQ=33333333 +CONFIG_SH_CLK_CPG=y # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -283,12 +288,14 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_GUSA=y +# CONFIG_SPARSE_IRQ is not set # # Boot options # CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttySC0,115200" @@ -367,6 +374,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -384,7 +392,11 @@ CONFIG_WIRELESS=y # CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -518,10 +530,6 @@ CONFIG_SCSI_PROC_FS=y # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -542,7 +550,6 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -574,6 +581,7 @@ CONFIG_MII=y CONFIG_USB_USBNET=y # CONFIG_USB_NET_AX8817X is not set CONFIG_USB_NET_CDCETHER=y +# CONFIG_USB_NET_CDC_EEM is not set CONFIG_USB_NET_DM9601=y # CONFIG_USB_NET_SMSC95XX is not set # CONFIG_USB_NET_GL620A is not set @@ -583,6 +591,7 @@ CONFIG_USB_NET_DM9601=y # CONFIG_USB_NET_RNDIS_HOST is not set # CONFIG_USB_NET_CDC_SUBSET is not set # CONFIG_USB_NET_ZAURUS is not set +# CONFIG_USB_NET_INT51X1 is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -696,7 +705,6 @@ CONFIG_I2C_SH_MOBILE=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -729,106 +737,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -CONFIG_VIDEO_DEV=y -CONFIG_VIDEO_V4L2_COMMON=y -CONFIG_VIDEO_ALLOW_V4L1=y -CONFIG_VIDEO_V4L1_COMPAT=y -# CONFIG_DVB_CORE is not set -CONFIG_VIDEO_MEDIA=y - -# -# Multimedia drivers -# -# CONFIG_MEDIA_ATTACH is not set -CONFIG_MEDIA_TUNER=y -# CONFIG_MEDIA_TUNER_CUSTOMISE is not set -CONFIG_MEDIA_TUNER_SIMPLE=y -CONFIG_MEDIA_TUNER_TDA8290=y -CONFIG_MEDIA_TUNER_TDA9887=y -CONFIG_MEDIA_TUNER_TEA5761=y -CONFIG_MEDIA_TUNER_TEA5767=y -CONFIG_MEDIA_TUNER_MT20XX=y -CONFIG_MEDIA_TUNER_XC2028=y -CONFIG_MEDIA_TUNER_XC5000=y -CONFIG_MEDIA_TUNER_MC44S803=y -CONFIG_VIDEO_V4L2=y -CONFIG_VIDEO_V4L1=y -CONFIG_VIDEO_CAPTURE_DRIVERS=y -# CONFIG_VIDEO_ADV_DEBUG is not set -# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set -CONFIG_VIDEO_HELPER_CHIPS_AUTO=y -# CONFIG_VIDEO_VIVI is not set -# CONFIG_VIDEO_CPIA is not set -# CONFIG_VIDEO_CPIA2 is not set -# CONFIG_VIDEO_SAA5246A is not set -# CONFIG_VIDEO_SAA5249 is not set -# CONFIG_SOC_CAMERA is not set -CONFIG_V4L_USB_DRIVERS=y -# CONFIG_USB_VIDEO_CLASS is not set -CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y -CONFIG_USB_GSPCA=m -# CONFIG_USB_M5602 is not set -# CONFIG_USB_STV06XX is not set -# CONFIG_USB_GSPCA_CONEX is not set -# CONFIG_USB_GSPCA_ETOMS is not set -# CONFIG_USB_GSPCA_FINEPIX is not set -# CONFIG_USB_GSPCA_MARS is not set -# CONFIG_USB_GSPCA_MR97310A is not set -# CONFIG_USB_GSPCA_OV519 is not set -# CONFIG_USB_GSPCA_OV534 is not set -# CONFIG_USB_GSPCA_PAC207 is not set -# CONFIG_USB_GSPCA_PAC7311 is not set -# CONFIG_USB_GSPCA_SONIXB is not set -# CONFIG_USB_GSPCA_SONIXJ is not set -# CONFIG_USB_GSPCA_SPCA500 is not set -# CONFIG_USB_GSPCA_SPCA501 is not set -# CONFIG_USB_GSPCA_SPCA505 is not set -# CONFIG_USB_GSPCA_SPCA506 is not set -# CONFIG_USB_GSPCA_SPCA508 is not set -# CONFIG_USB_GSPCA_SPCA561 is not set -# CONFIG_USB_GSPCA_SQ905 is not set -# CONFIG_USB_GSPCA_SQ905C is not set -# CONFIG_USB_GSPCA_STK014 is not set -# CONFIG_USB_GSPCA_SUNPLUS is not set -# CONFIG_USB_GSPCA_T613 is not set -# CONFIG_USB_GSPCA_TV8532 is not set -# CONFIG_USB_GSPCA_VC032X is not set -# CONFIG_USB_GSPCA_ZC3XX is not set -# CONFIG_VIDEO_PVRUSB2 is not set -# CONFIG_VIDEO_HDPVR is not set -# CONFIG_VIDEO_EM28XX is not set -# CONFIG_VIDEO_CX231XX is not set -# CONFIG_VIDEO_USBVISION is not set -# CONFIG_USB_VICAM is not set -# CONFIG_USB_IBMCAM is not set -# CONFIG_USB_KONICAWC is not set -# CONFIG_USB_QUICKCAM_MESSENGER is not set -# CONFIG_USB_ET61X251 is not set -# CONFIG_VIDEO_OVCAMCHIP is not set -# CONFIG_USB_OV511 is not set -# CONFIG_USB_SE401 is not set -# CONFIG_USB_SN9C102 is not set -# CONFIG_USB_STV680 is not set -# CONFIG_USB_ZC0301 is not set -# CONFIG_USB_PWC is not set -CONFIG_USB_PWC_INPUT_EVDEV=y -# CONFIG_USB_ZR364XX is not set -# CONFIG_USB_STKWEBCAM is not set -# CONFIG_USB_S2255 is not set -CONFIG_RADIO_ADAPTERS=y -# CONFIG_USB_DSBR is not set -# CONFIG_USB_SI470X is not set -# CONFIG_USB_MR800 is not set -# CONFIG_RADIO_TEA5764 is not set -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -894,6 +803,11 @@ CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_VIRMIDI is not set @@ -927,7 +841,7 @@ CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y -# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_DRAGONRISE is not set CONFIG_HID_EZKEY=y # CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y @@ -944,10 +858,11 @@ CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y -# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set # CONFIG_HID_TOPSEED is not set -# CONFIG_THRUSTMASTER_FF is not set -# CONFIG_ZEROPLUS_FF is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set @@ -1042,6 +957,7 @@ CONFIG_USB_ISP116X_HCD=y # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set @@ -1050,6 +966,10 @@ CONFIG_UIO=y # CONFIG_UIO_PDRV_GENIRQ is not set # CONFIG_UIO_SMX is not set # CONFIG_UIO_SERCOS3 is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1069,12 +989,14 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set @@ -1167,7 +1089,46 @@ CONFIG_SUNRPC=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y -# CONFIG_NLS is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set # @@ -1191,21 +1152,7 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y @@ -1213,7 +1160,6 @@ CONFIG_HAVE_ARCH_KGDB=y CONFIG_EARLY_SCIF_CONSOLE=y CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe00000 CONFIG_EARLY_PRINTK=y -# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -1328,3 +1274,4 @@ CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y diff --git a/arch/sh/configs/se7619_defconfig b/arch/sh/configs/se7619_defconfig index edbece5..724bb77 100644 --- a/arch/sh/configs/se7619_defconfig +++ b/arch/sh/configs/se7619_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Mon Apr 27 13:02:32 2009 +# Linux kernel version: 2.6.30 +# Thu Jun 18 12:47:56 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -15,8 +15,8 @@ CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y # CONFIG_GENERIC_GPIO is not set -# CONFIG_GENERIC_TIME is not set -# CONFIG_GENERIC_CLOCKEVENTS is not set +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_ARCH_SUSPEND_POSSIBLE is not set # CONFIG_ARCH_HIBERNATION_POSSIBLE is not set CONFIG_SYS_SUPPORTS_CMT=y @@ -62,7 +62,6 @@ CONFIG_EMBEDDED=y # CONFIG_UID16 is not set # CONFIG_SYSCTL_SYSCALL is not set # CONFIG_KALLSYMS is not set -# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y @@ -74,7 +73,12 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_AIO=y + +# +# Performance Counters +# # CONFIG_VM_EVENT_COUNTERS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -155,6 +159,7 @@ CONFIG_CPU_SUBTYPE_SH7619=y # CONFIG_QUICKLIST=y CONFIG_PAGE_OFFSET=0x00000000 +CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x04000000 CONFIG_29BIT=y @@ -168,7 +173,6 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set -CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -181,7 +185,8 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_UNEVICTABLE_LRU=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_NOMMU_INITIAL_TRIM_EXCESS=1 # # Cache configuration @@ -206,10 +211,14 @@ CONFIG_SH_7619_SOLUTION_ENGINE=y # # Timer and clock configuration # -CONFIG_SH_CMT=y -CONFIG_SH_TIMER_IRQ=86 +CONFIG_SH_TIMER_CMT=y CONFIG_SH_PCLK_FREQ=31250000 +CONFIG_SH_CLK_CPG=y +CONFIG_SH_CLK_CPG_LEGACY=y CONFIG_SH_CLK_MD=5 +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # # CPU Frequency scaling @@ -245,12 +254,14 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_GUSA=y +# CONFIG_SPARSE_IRQ is not set # # Boot options # CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_ENTRY_OFFSET=0x00001000 # CONFIG_CMDLINE_BOOL is not set # @@ -479,21 +490,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -541,10 +538,15 @@ CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -556,11 +558,13 @@ CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set @@ -644,25 +648,12 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_FTRACE is not set # CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set -# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -689,3 +680,4 @@ CONFIG_ZLIB_INFLATE=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_GENERIC_ATOMIC64=y diff --git a/arch/sh/configs/se7705_defconfig b/arch/sh/configs/se7705_defconfig index bae161c..6ca6a2f 100644 --- a/arch/sh/configs/se7705_defconfig +++ b/arch/sh/configs/se7705_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Mon Apr 27 13:02:52 2009 +# Linux kernel version: 2.6.30 +# Thu Jun 18 12:48:18 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -19,6 +19,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_ARCH_SUSPEND_POSSIBLE is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -70,7 +71,6 @@ CONFIG_EMBEDDED=y CONFIG_UID16=y # CONFIG_SYSCTL_SYSCALL is not set # CONFIG_KALLSYMS is not set -# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y @@ -83,7 +83,12 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -171,6 +176,7 @@ CONFIG_CPU_SUBTYPE_SH7705=y CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x02000000 CONFIG_29BIT=y @@ -185,7 +191,6 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set -CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -198,9 +203,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # # Cache configuration @@ -231,9 +236,10 @@ CONFIG_SH_SOLUTION_ENGINE=y # # Timer and clock configuration # -CONFIG_SH_TMU=y -CONFIG_SH_TIMER_IRQ=16 +CONFIG_SH_TIMER_TMU=y CONFIG_SH_PCLK_FREQ=33333333 +CONFIG_SH_CLK_CPG=y +CONFIG_SH_CLK_CPG_LEGACY=y # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -275,12 +281,14 @@ CONFIG_HZ=250 CONFIG_PREEMPT=y CONFIG_GUSA=y # CONFIG_GUSA_RB is not set +# CONFIG_SPARSE_IRQ is not set # # Boot options # CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_ENTRY_OFFSET=0x00001000 # CONFIG_CMDLINE_BOOL is not set # @@ -361,6 +369,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -378,7 +387,11 @@ CONFIG_WIRELESS=y # CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -507,7 +520,6 @@ CONFIG_HAVE_IDE=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -532,6 +544,7 @@ CONFIG_STNIC=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set CONFIG_NETDEV_1000=y CONFIG_NETDEV_10000=y @@ -662,22 +675,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -725,10 +723,15 @@ CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -742,9 +745,10 @@ CONFIG_EXT2_FS=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -856,27 +860,12 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_PREEMPT_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_FTRACE is not set # CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set -# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -991,3 +980,4 @@ CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y diff --git a/arch/sh/configs/se7712_defconfig b/arch/sh/configs/se7712_defconfig index 330043f..b8aae11 100644 --- a/arch/sh/configs/se7712_defconfig +++ b/arch/sh/configs/se7712_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Mon Apr 27 13:03:27 2009 +# Linux kernel version: 2.6.30 +# Thu Jun 18 12:49:00 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -18,6 +18,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_ARCH_SUSPEND_POSSIBLE is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -71,7 +72,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y # CONFIG_BUG is not set @@ -84,7 +84,12 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y # CONFIG_SHMEM is not set CONFIG_AIO=y + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -173,6 +178,7 @@ CONFIG_CPU_SUBTYPE_SH7712=y CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x02000000 CONFIG_29BIT=y @@ -187,7 +193,6 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set -CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -200,9 +205,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # # Cache configuration @@ -233,9 +238,10 @@ CONFIG_SH_SOLUTION_ENGINE=y # # Timer and clock configuration # -CONFIG_SH_TMU=y -CONFIG_SH_TIMER_IRQ=16 +CONFIG_SH_TIMER_TMU=y CONFIG_SH_PCLK_FREQ=66666666 +CONFIG_SH_CLK_CPG=y +CONFIG_SH_CLK_CPG_LEGACY=y # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -277,12 +283,14 @@ CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set CONFIG_GUSA=y # CONFIG_GUSA_RB is not set +# CONFIG_SPARSE_IRQ is not set # # Boot options # CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1" @@ -374,6 +382,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set CONFIG_NET_SCHED=y # @@ -427,7 +436,11 @@ CONFIG_WIRELESS=y # CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -568,10 +581,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -588,6 +597,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_LIBFC is not set # CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set @@ -601,7 +611,6 @@ CONFIG_ATA_SFF=y CONFIG_PATA_PLATFORM=y # CONFIG_MD is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -646,6 +655,7 @@ CONFIG_SH_ETH=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set CONFIG_NETDEV_1000=y CONFIG_NETDEV_10000=y @@ -730,22 +740,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -802,10 +797,15 @@ CONFIG_LEDS_TRIGGERS=y # iptables trigger is under Netfilter config (LED target) # # CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -827,12 +827,14 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set @@ -975,17 +977,15 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -994,16 +994,15 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_DEBUG_BOOTMEM is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_4KSTACKS is not set -# CONFIG_IRQSTACKS is not set # CONFIG_DUMP_CODE is not set # CONFIG_SH_NO_BSS_INIT is not set -# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -1129,3 +1128,4 @@ CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y diff --git a/arch/sh/configs/se7721_defconfig b/arch/sh/configs/se7721_defconfig index 5647891..306e21c 100644 --- a/arch/sh/configs/se7721_defconfig +++ b/arch/sh/configs/se7721_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Mon Apr 27 13:04:19 2009 +# Linux kernel version: 2.6.30 +# Thu Jun 18 12:50:49 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -18,6 +18,8 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_ARCH_SUSPEND_POSSIBLE is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_SYS_SUPPORTS_CMT=y +CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -75,7 +77,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y # CONFIG_BUG is not set @@ -88,7 +89,12 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y # CONFIG_SHMEM is not set CONFIG_AIO=y + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -177,6 +183,7 @@ CONFIG_CPU_SUBTYPE_SH7721=y CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x02000000 CONFIG_29BIT=y @@ -191,7 +198,6 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set -CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -204,9 +210,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # # Cache configuration @@ -236,9 +242,11 @@ CONFIG_SH_7721_SOLUTION_ENGINE=y # # Timer and clock configuration # -CONFIG_SH_TMU=y -CONFIG_SH_TIMER_IRQ=16 +CONFIG_SH_TIMER_TMU=y +CONFIG_SH_TIMER_CMT=y CONFIG_SH_PCLK_FREQ=33333333 +CONFIG_SH_CLK_CPG=y +CONFIG_SH_CLK_CPG_LEGACY=y # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -280,12 +288,14 @@ CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set CONFIG_GUSA=y # CONFIG_GUSA_RB is not set +# CONFIG_SPARSE_IRQ is not set # # Boot options # CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda2" @@ -377,6 +387,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set CONFIG_NET_SCHED=y # @@ -430,7 +441,11 @@ CONFIG_WIRELESS=y # CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -572,10 +587,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -601,7 +612,6 @@ CONFIG_ATA_SFF=y CONFIG_PATA_PLATFORM=y # CONFIG_MD is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -735,22 +745,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -786,7 +781,7 @@ CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y -# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_DRAGONRISE is not set CONFIG_HID_EZKEY=y # CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y @@ -803,10 +798,11 @@ CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y -# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set # CONFIG_HID_TOPSEED is not set -CONFIG_THRUSTMASTER_FF=m -CONFIG_ZEROPLUS_FF=m +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -934,10 +930,15 @@ CONFIG_LEDS_TRIGGERS=y # iptables trigger is under Netfilter config (LED target) # # CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -959,12 +960,14 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set @@ -1134,17 +1137,15 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -1153,16 +1154,15 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_DEBUG_BOOTMEM is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_4KSTACKS is not set -# CONFIG_IRQSTACKS is not set # CONFIG_DUMP_CODE is not set # CONFIG_SH_NO_BSS_INIT is not set -# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -1288,3 +1288,4 @@ CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y diff --git a/arch/sh/configs/se7722_defconfig b/arch/sh/configs/se7722_defconfig index 726fdbdb..6194382 100644 --- a/arch/sh/configs/se7722_defconfig +++ b/arch/sh/configs/se7722_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Mon Apr 27 13:05:29 2009 +# Linux kernel version: 2.6.30 +# Thu Jun 18 12:54:24 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -21,6 +21,7 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_SYS_SUPPORTS_NUMA=y CONFIG_SYS_SUPPORTS_CMT=y +CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -78,7 +79,6 @@ CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -91,8 +91,13 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -187,6 +192,7 @@ CONFIG_CPU_SUBTYPE_SH7722=y CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x04000000 CONFIG_29BIT=y @@ -205,7 +211,6 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set -CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_HUGETLB_PAGE_SIZE_64K=y # CONFIG_HUGETLB_PAGE_SIZE_256K is not set # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set @@ -226,9 +231,9 @@ CONFIG_MIGRATION=y # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # # Cache configuration @@ -247,7 +252,6 @@ CONFIG_SH_DSP=y CONFIG_SH_STORE_QUEUES=y CONFIG_CPU_HAS_INTEVT=y CONFIG_CPU_HAS_SR_RB=y -CONFIG_CPU_HAS_PTEA=y CONFIG_CPU_HAS_DSP=y # @@ -260,10 +264,10 @@ CONFIG_SH_7722_SOLUTION_ENGINE=y # # Timer and clock configuration # -CONFIG_SH_TMU=y +CONFIG_SH_TIMER_TMU=y # CONFIG_SH_TIMER_CMT is not set -CONFIG_SH_TIMER_IRQ=16 CONFIG_SH_PCLK_FREQ=33333333 +CONFIG_SH_CLK_CPG=y CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y @@ -305,12 +309,14 @@ CONFIG_KEXEC=y # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y CONFIG_GUSA=y +# CONFIG_SPARSE_IRQ is not set # # Boot options # CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_ENTRY_OFFSET=0x00001000 # CONFIG_CMDLINE_BOOL is not set # @@ -389,6 +395,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -406,7 +413,11 @@ CONFIG_WIRELESS=y # CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -467,10 +478,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -487,6 +494,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_LIBFC is not set # CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set @@ -500,7 +508,6 @@ CONFIG_ATA_SFF=y CONFIG_PATA_PLATFORM=y # CONFIG_MD is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -525,6 +532,7 @@ CONFIG_SMC91X=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set CONFIG_NETDEV_1000=y CONFIG_NETDEV_10000=y @@ -656,22 +664,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -756,9 +749,14 @@ CONFIG_RTC_INTF_DEV=y # on-CPU RTC drivers # CONFIG_RTC_DRV_SH=y +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -779,10 +777,11 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -882,22 +881,7 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_PREEMPT_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set @@ -905,7 +889,6 @@ CONFIG_HAVE_ARCH_KGDB=y CONFIG_SH_STANDARD_BIOS=y # CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_EARLY_PRINTK is not set -# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -1020,3 +1003,4 @@ CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y diff --git a/arch/sh/configs/se7724_defconfig b/arch/sh/configs/se7724_defconfig index 96d2587..c5f005f 100644 --- a/arch/sh/configs/se7724_defconfig +++ b/arch/sh/configs/se7724_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc6 -# Tue May 26 13:18:09 2009 +# Linux kernel version: 2.6.30 +# Thu Jun 18 12:56:56 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -76,7 +76,6 @@ CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -89,7 +88,12 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -209,9 +213,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # # Cache configuration @@ -229,7 +233,6 @@ CONFIG_SH_FPU=y # CONFIG_SH_STORE_QUEUES is not set CONFIG_CPU_HAS_INTEVT=y CONFIG_CPU_HAS_SR_RB=y -CONFIG_CPU_HAS_PTEA=y CONFIG_CPU_HAS_FPU=y # @@ -244,6 +247,7 @@ CONFIG_SH_7724_SOLUTION_ENGINE=y CONFIG_SH_TIMER_TMU=y # CONFIG_SH_TIMER_CMT is not set CONFIG_SH_PCLK_FREQ=33333333 +CONFIG_SH_CLK_CPG=y # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -284,6 +288,7 @@ CONFIG_SECCOMP=y # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y CONFIG_GUSA=y +# CONFIG_SPARSE_IRQ is not set # # Boot options @@ -373,6 +378,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -390,7 +396,11 @@ CONFIG_WIRELESS=y # CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -534,6 +544,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_AT25 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -557,10 +568,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -577,6 +584,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_LIBFC is not set # CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set @@ -585,7 +593,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -617,6 +624,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set # CONFIG_STNIC is not set +# CONFIG_SH_ETH is not set CONFIG_SMC91X=y # CONFIG_ENC28J60 is not set # CONFIG_ETHOC is not set @@ -631,6 +639,7 @@ CONFIG_SMC91X=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -772,7 +781,6 @@ CONFIG_I2C_SH_MOBILE=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -844,100 +852,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -CONFIG_VIDEO_DEV=y -CONFIG_VIDEO_V4L2_COMMON=y -# CONFIG_VIDEO_ALLOW_V4L1 is not set -CONFIG_VIDEO_V4L1_COMPAT=y -# CONFIG_DVB_CORE is not set -CONFIG_VIDEO_MEDIA=y - -# -# Multimedia drivers -# -# CONFIG_MEDIA_ATTACH is not set -CONFIG_MEDIA_TUNER=y -# CONFIG_MEDIA_TUNER_CUSTOMISE is not set -CONFIG_MEDIA_TUNER_SIMPLE=y -CONFIG_MEDIA_TUNER_TDA8290=y -CONFIG_MEDIA_TUNER_TDA9887=y -CONFIG_MEDIA_TUNER_TEA5761=y -CONFIG_MEDIA_TUNER_TEA5767=y -CONFIG_MEDIA_TUNER_MT20XX=y -CONFIG_MEDIA_TUNER_XC2028=y -CONFIG_MEDIA_TUNER_XC5000=y -CONFIG_MEDIA_TUNER_MC44S803=y -CONFIG_VIDEO_V4L2=y -CONFIG_VIDEOBUF_GEN=y -CONFIG_VIDEOBUF_DMA_CONTIG=y -CONFIG_VIDEO_CAPTURE_DRIVERS=y -# CONFIG_VIDEO_ADV_DEBUG is not set -# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set -CONFIG_VIDEO_HELPER_CHIPS_AUTO=y -# CONFIG_VIDEO_VIVI is not set -# CONFIG_VIDEO_SAA5246A is not set -# CONFIG_VIDEO_SAA5249 is not set -CONFIG_SOC_CAMERA=y -# CONFIG_SOC_CAMERA_MT9M001 is not set -# CONFIG_SOC_CAMERA_MT9M111 is not set -# CONFIG_SOC_CAMERA_MT9T031 is not set -# CONFIG_SOC_CAMERA_MT9V022 is not set -# CONFIG_SOC_CAMERA_TW9910 is not set -# CONFIG_SOC_CAMERA_PLATFORM is not set -CONFIG_SOC_CAMERA_OV772X=y -CONFIG_VIDEO_SH_MOBILE_CEU=y -CONFIG_V4L_USB_DRIVERS=y -# CONFIG_USB_VIDEO_CLASS is not set -CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y -CONFIG_USB_GSPCA=m -# CONFIG_USB_M5602 is not set -# CONFIG_USB_STV06XX is not set -# CONFIG_USB_GSPCA_CONEX is not set -# CONFIG_USB_GSPCA_ETOMS is not set -# CONFIG_USB_GSPCA_FINEPIX is not set -# CONFIG_USB_GSPCA_MARS is not set -# CONFIG_USB_GSPCA_MR97310A is not set -# CONFIG_USB_GSPCA_OV519 is not set -# CONFIG_USB_GSPCA_OV534 is not set -# CONFIG_USB_GSPCA_PAC207 is not set -# CONFIG_USB_GSPCA_PAC7311 is not set -# CONFIG_USB_GSPCA_SONIXB is not set -# CONFIG_USB_GSPCA_SONIXJ is not set -# CONFIG_USB_GSPCA_SPCA500 is not set -# CONFIG_USB_GSPCA_SPCA501 is not set -# CONFIG_USB_GSPCA_SPCA505 is not set -# CONFIG_USB_GSPCA_SPCA506 is not set -# CONFIG_USB_GSPCA_SPCA508 is not set -# CONFIG_USB_GSPCA_SPCA561 is not set -# CONFIG_USB_GSPCA_SQ905 is not set -# CONFIG_USB_GSPCA_SQ905C is not set -# CONFIG_USB_GSPCA_STK014 is not set -# CONFIG_USB_GSPCA_SUNPLUS is not set -# CONFIG_USB_GSPCA_T613 is not set -# CONFIG_USB_GSPCA_TV8532 is not set -# CONFIG_USB_GSPCA_VC032X is not set -# CONFIG_USB_GSPCA_ZC3XX is not set -# CONFIG_VIDEO_PVRUSB2 is not set -# CONFIG_VIDEO_HDPVR is not set -# CONFIG_VIDEO_EM28XX is not set -# CONFIG_VIDEO_CX231XX is not set -# CONFIG_VIDEO_USBVISION is not set -# CONFIG_USB_ET61X251 is not set -# CONFIG_USB_SN9C102 is not set -# CONFIG_USB_ZC0301 is not set -CONFIG_USB_PWC_INPUT_EVDEV=y -# CONFIG_USB_ZR364XX is not set -# CONFIG_USB_STKWEBCAM is not set -# CONFIG_USB_S2255 is not set -# CONFIG_RADIO_ADAPTERS is not set -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1019,7 +934,7 @@ CONFIG_USB_HID=y # CONFIG_HID_CHERRY is not set # CONFIG_HID_CHICONY is not set # CONFIG_HID_CYPRESS is not set -# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_DRAGONRISE is not set # CONFIG_HID_EZKEY is not set # CONFIG_HID_KYE is not set # CONFIG_HID_GYRATION is not set @@ -1033,10 +948,11 @@ CONFIG_USB_HID=y # CONFIG_HID_SAMSUNG is not set # CONFIG_HID_SONY is not set # CONFIG_HID_SUNPLUS is not set -# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set # CONFIG_HID_TOPSEED is not set -# CONFIG_THRUSTMASTER_FF is not set -# CONFIG_ZEROPLUS_FF is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set @@ -1228,6 +1144,10 @@ CONFIG_UIO=y CONFIG_UIO_PDRV_GENIRQ=y # CONFIG_UIO_SMX is not set # CONFIG_UIO_SERCOS3 is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1249,10 +1169,11 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1408,22 +1329,7 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_PREEMPT_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y @@ -1550,3 +1456,4 @@ CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y diff --git a/arch/sh/configs/se7750_defconfig b/arch/sh/configs/se7750_defconfig index ed1a123..564bf7b 100644 --- a/arch/sh/configs/se7750_defconfig +++ b/arch/sh/configs/se7750_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Mon Apr 27 13:06:02 2009 +# Linux kernel version: 2.6.30 +# Thu Jun 18 13:00:01 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -19,6 +19,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_ARCH_SUSPEND_POSSIBLE is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -71,7 +72,6 @@ CONFIG_UID16=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y @@ -84,7 +84,12 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -173,6 +178,7 @@ CONFIG_CPU_SUBTYPE_SH7750=y CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x02000000 CONFIG_29BIT=y @@ -187,7 +193,6 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set -CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -200,9 +205,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # # Cache configuration @@ -221,7 +226,6 @@ CONFIG_SH_FPU=y CONFIG_CPU_HAS_INTEVT=y CONFIG_CPU_HAS_IPR_IRQ=y CONFIG_CPU_HAS_SR_RB=y -CONFIG_CPU_HAS_PTEA=y CONFIG_CPU_HAS_FPU=y # @@ -233,9 +237,10 @@ CONFIG_SH_SOLUTION_ENGINE=y # # Timer and clock configuration # -CONFIG_SH_TMU=y -CONFIG_SH_TIMER_IRQ=16 +CONFIG_SH_TIMER_TMU=y CONFIG_SH_PCLK_FREQ=33333333 +CONFIG_SH_CLK_CPG=y +CONFIG_SH_CLK_CPG_LEGACY=y # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -277,12 +282,14 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT is not set CONFIG_GUSA=y # CONFIG_GUSA_RB is not set +# CONFIG_SPARSE_IRQ is not set # # Boot options # CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_ENTRY_OFFSET=0x00001000 # CONFIG_UBC_WAKEUP is not set # CONFIG_CMDLINE_BOOL is not set @@ -365,6 +372,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -382,7 +390,11 @@ CONFIG_WIRELESS=y # CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -535,10 +547,6 @@ CONFIG_SCSI_PROC_FS=y # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -555,6 +563,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_LIBFC is not set # CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set @@ -563,7 +572,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -588,6 +596,7 @@ CONFIG_STNIC=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set CONFIG_NETDEV_1000=y CONFIG_NETDEV_10000=y @@ -697,22 +706,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -751,10 +745,15 @@ CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -766,10 +765,11 @@ CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -897,27 +897,12 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set -# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -1032,3 +1017,4 @@ CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y diff --git a/arch/sh/configs/se7751_defconfig b/arch/sh/configs/se7751_defconfig index 55f3b78..eb431c4 100644 --- a/arch/sh/configs/se7751_defconfig +++ b/arch/sh/configs/se7751_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Mon Apr 27 13:06:44 2009 +# Linux kernel version: 2.6.30 +# Thu Jun 18 13:02:26 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -19,6 +19,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_ARCH_SUSPEND_POSSIBLE is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -74,7 +75,6 @@ CONFIG_UID16=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y @@ -87,7 +87,12 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -176,6 +181,7 @@ CONFIG_CPU_SUBTYPE_SH7751=y CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x04000000 CONFIG_29BIT=y @@ -190,7 +196,6 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set -CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -203,9 +208,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # # Cache configuration @@ -224,7 +229,6 @@ CONFIG_SH_FPU=y CONFIG_CPU_HAS_INTEVT=y CONFIG_CPU_HAS_IPR_IRQ=y CONFIG_CPU_HAS_SR_RB=y -CONFIG_CPU_HAS_PTEA=y CONFIG_CPU_HAS_FPU=y # @@ -237,9 +241,10 @@ CONFIG_SH_7751_SOLUTION_ENGINE=y # # Timer and clock configuration # -CONFIG_SH_TMU=y -CONFIG_SH_TIMER_IRQ=16 +CONFIG_SH_TIMER_TMU=y CONFIG_SH_PCLK_FREQ=60000000 +CONFIG_SH_CLK_CPG=y +CONFIG_SH_CLK_CPG_LEGACY=y # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -281,12 +286,14 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT is not set CONFIG_GUSA=y # CONFIG_GUSA_RB is not set +# CONFIG_SPARSE_IRQ is not set # # Boot options # CONFIG_ZERO_PAGE_OFFSET=0x00010000 CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_ENTRY_OFFSET=0x00001000 # CONFIG_UBC_WAKEUP is not set CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttySC1,38400" @@ -389,6 +396,7 @@ CONFIG_IP_NF_QUEUE=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -406,7 +414,11 @@ CONFIG_WIRELESS=y # CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -535,7 +547,6 @@ CONFIG_HAVE_IDE=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -560,6 +571,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set CONFIG_NETDEV_1000=y CONFIG_NETDEV_10000=y @@ -660,22 +672,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -714,10 +711,15 @@ CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -731,10 +733,11 @@ CONFIG_EXT2_FS=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -842,27 +845,12 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set -# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -978,3 +966,4 @@ CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y diff --git a/arch/sh/configs/se7780_defconfig b/arch/sh/configs/se7780_defconfig index c4f0af3..756beec 100644 --- a/arch/sh/configs/se7780_defconfig +++ b/arch/sh/configs/se7780_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Mon Apr 27 13:07:14 2009 +# Linux kernel version: 2.6.30 +# Thu Jun 18 13:03:56 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -20,6 +20,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_ARCH_SUSPEND_POSSIBLE is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_SYS_SUPPORTS_PCI=y +CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -68,7 +69,6 @@ CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set -# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y @@ -81,8 +81,13 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -170,6 +175,7 @@ CONFIG_CPU_SUBTYPE_SH7780=y CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MEMORY_START=0x08000000 CONFIG_MEMORY_SIZE=0x08000000 CONFIG_29BIT=y @@ -186,7 +192,6 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set -CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y # CONFIG_FLATMEM_MANUAL is not set # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -200,9 +205,9 @@ CONFIG_MIGRATION=y # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # # Cache configuration @@ -233,9 +238,10 @@ CONFIG_SH_7780_SOLUTION_ENGINE=y # # Timer and clock configuration # -CONFIG_SH_TMU=y -CONFIG_SH_TIMER_IRQ=28 +CONFIG_SH_TIMER_TMU=y CONFIG_SH_PCLK_FREQ=33333333 +CONFIG_SH_CLK_CPG=y +CONFIG_SH_CLK_CPG_LEGACY=y # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -280,6 +286,7 @@ CONFIG_GUSA=y # CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00810000 +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttySC0.115200 root=/dev/sda1" @@ -323,6 +330,7 @@ CONFIG_IP_PNP=y # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set # CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set @@ -377,7 +385,11 @@ CONFIG_WIRELESS=y # CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set @@ -503,6 +515,7 @@ CONFIG_MISC_DEVICES=y # EEPROM support # # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -524,10 +537,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_BLK_DEV_SR is not set CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -544,6 +553,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -552,6 +562,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set @@ -566,7 +577,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -643,7 +653,6 @@ CONFIG_SATA_SIL=y # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set @@ -709,6 +718,7 @@ CONFIG_NET_PCI=y # CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set +# CONFIG_KS8842 is not set # CONFIG_VIA_RHINE is not set # CONFIG_ATL2 is not set # CONFIG_NETDEV_1000 is not set @@ -842,22 +852,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -965,7 +960,7 @@ CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y -# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_DRAGONRISE is not set CONFIG_HID_EZKEY=y # CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y @@ -982,10 +977,11 @@ CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y -# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set # CONFIG_HID_TOPSEED is not set -CONFIG_THRUSTMASTER_FF=m -CONFIG_ZEROPLUS_FF=m +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1097,10 +1093,15 @@ CONFIG_USB_STORAGE=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set +CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1114,9 +1115,10 @@ CONFIG_EXT2_FS=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1254,28 +1256,13 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set -# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -1385,3 +1372,4 @@ CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y diff --git a/arch/sh/configs/sh03_defconfig b/arch/sh/configs/sh03_defconfig index f9c6e51..7fedaae 100644 --- a/arch/sh/configs/sh03_defconfig +++ b/arch/sh/configs/sh03_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Mon Apr 27 13:07:56 2009 +# Linux kernel version: 2.6.30 +# Thu Jun 18 13:04:41 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -17,9 +17,11 @@ CONFIG_GENERIC_IRQ_PROBE=y # CONFIG_GENERIC_GPIO is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CMOS_UPDATE=y # CONFIG_ARCH_SUSPEND_POSSIBLE is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_SYS_SUPPORTS_PCI=y +CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -77,7 +79,6 @@ CONFIG_UID16=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -90,15 +91,20 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set CONFIG_PROFILING=y CONFIG_TRACEPOINTS=y -# CONFIG_MARKERS is not set +CONFIG_MARKERS=y CONFIG_OPROFILE=m CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set @@ -183,6 +189,7 @@ CONFIG_CPU_SUBTYPE_SH7751=y CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MEMORY_START=0x08000000 CONFIG_MEMORY_SIZE=0x08000000 CONFIG_29BIT=y @@ -197,7 +204,6 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set -CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -210,9 +216,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # # Cache configuration @@ -231,7 +237,6 @@ CONFIG_SH_FPU=y CONFIG_CPU_HAS_INTEVT=y CONFIG_CPU_HAS_IPR_IRQ=y CONFIG_CPU_HAS_SR_RB=y -CONFIG_CPU_HAS_PTEA=y CONFIG_CPU_HAS_FPU=y # @@ -243,9 +248,10 @@ CONFIG_SH_SH03=y # # Timer and clock configuration # -CONFIG_SH_TMU=y -CONFIG_SH_TIMER_IRQ=16 +CONFIG_SH_TIMER_TMU=y CONFIG_SH_PCLK_FREQ=60000000 +CONFIG_SH_CLK_CPG=y +CONFIG_SH_CLK_CPG_LEGACY=y # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -287,12 +293,14 @@ CONFIG_HZ=250 CONFIG_PREEMPT=y CONFIG_GUSA=y # CONFIG_GUSA_RB is not set +# CONFIG_SPARSE_IRQ is not set # # Boot options # CONFIG_ZERO_PAGE_OFFSET=0x00004000 CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_ENTRY_OFFSET=0x00001000 # CONFIG_UBC_WAKEUP is not set CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttySC1,115200 mem=64M root=/dev/nfs" @@ -388,6 +396,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -406,7 +415,11 @@ CONFIG_WIRELESS=y # CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -454,6 +467,7 @@ CONFIG_MISC_DEVICES=y # EEPROM support # # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y @@ -526,10 +540,6 @@ CONFIG_BLK_DEV_SR=m CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -547,6 +557,7 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -555,6 +566,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set @@ -569,7 +581,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_QLOGIC_1280 is not set @@ -598,7 +609,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -647,6 +657,7 @@ CONFIG_8139CP=y # CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set +# CONFIG_KS8842 is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set @@ -845,22 +856,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -916,10 +912,15 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set +CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -942,10 +943,11 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1120,25 +1122,11 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_RING_BUFFER=y +CONFIG_EVENT_TRACING=y +CONFIG_CONTEXT_SWITCH_TRACER=y CONFIG_TRACING=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_PREEMPT_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_FTRACE is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set @@ -1146,7 +1134,6 @@ CONFIG_HAVE_ARCH_KGDB=y CONFIG_SH_STANDARD_BIOS=y # CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_EARLY_PRINTK is not set -# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -1273,3 +1260,4 @@ CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y diff --git a/arch/sh/configs/sh7710voipgw_defconfig b/arch/sh/configs/sh7710voipgw_defconfig index 48b5809..c296ca5 100644 --- a/arch/sh/configs/sh7710voipgw_defconfig +++ b/arch/sh/configs/sh7710voipgw_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Mon Apr 27 13:09:16 2009 +# Linux kernel version: 2.6.30 +# Thu Jun 18 13:06:13 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -19,6 +19,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_ARCH_SUSPEND_POSSIBLE is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -74,7 +75,6 @@ CONFIG_UID16=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -87,7 +87,12 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y # CONFIG_SHMEM is not set CONFIG_AIO=y + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -176,6 +181,7 @@ CONFIG_CPU_SUBTYPE_SH7710=y CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x00800000 CONFIG_29BIT=y @@ -190,7 +196,6 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set -CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -203,9 +208,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # # Cache configuration @@ -234,9 +239,10 @@ CONFIG_CPU_HAS_DSP=y # # Timer and clock configuration # -CONFIG_SH_TMU=y -CONFIG_SH_TIMER_IRQ=16 +CONFIG_SH_TIMER_TMU=y CONFIG_SH_PCLK_FREQ=32768000 +CONFIG_SH_CLK_CPG=y +CONFIG_SH_CLK_CPG_LEGACY=y # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -278,12 +284,14 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT is not set CONFIG_GUSA=y # CONFIG_GUSA_RB is not set +# CONFIG_SPARSE_IRQ is not set # # Boot options # CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_ENTRY_OFFSET=0x00001000 # CONFIG_CMDLINE_BOOL is not set # @@ -380,6 +388,7 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set CONFIG_NET_SCHED=y # @@ -434,7 +443,11 @@ CONFIG_WIRELESS=y # CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -564,7 +577,6 @@ CONFIG_HAVE_IDE=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -590,6 +602,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set CONFIG_NETDEV_1000=y CONFIG_NETDEV_10000=y @@ -693,22 +706,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -756,10 +754,15 @@ CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -771,12 +774,14 @@ CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set @@ -881,28 +886,13 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set -# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -1017,3 +1007,4 @@ CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y diff --git a/arch/sh/configs/sh7724_generic_defconfig b/arch/sh/configs/sh7724_generic_defconfig index ec8f18c..ba26be1 100644 --- a/arch/sh/configs/sh7724_generic_defconfig +++ b/arch/sh/configs/sh7724_generic_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Mon Apr 27 13:09:47 2009 +# Linux kernel version: 2.6.30 +# Thu Jun 18 13:06:48 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -20,6 +20,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_SYS_SUPPORTS_CMT=y +CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -79,7 +80,6 @@ CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -92,14 +92,19 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_COMPAT_BRK is not set # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y CONFIG_TRACEPOINTS=y -# CONFIG_MARKERS is not set +CONFIG_MARKERS=y CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_IOREMAP_PROT=y @@ -180,6 +185,7 @@ CONFIG_CPU_SUBTYPE_SH7724=y CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MEMORY_START=0x08000000 CONFIG_MEMORY_SIZE=0x04000000 CONFIG_29BIT=y @@ -197,7 +203,6 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set -CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y # CONFIG_FLATMEM_MANUAL is not set # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -215,9 +220,9 @@ CONFIG_MIGRATION=y # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # # Cache configuration @@ -235,20 +240,20 @@ CONFIG_SH_FPU=y # CONFIG_SH_STORE_QUEUES is not set CONFIG_CPU_HAS_INTEVT=y CONFIG_CPU_HAS_SR_RB=y -CONFIG_CPU_HAS_PTEA=y CONFIG_CPU_HAS_FPU=y # # Board support # +# CONFIG_SH_7724_SOLUTION_ENGINE is not set # # Timer and clock configuration # -CONFIG_SH_TMU=y +CONFIG_SH_TIMER_TMU=y CONFIG_SH_TIMER_CMT=y -CONFIG_SH_TIMER_IRQ=16 CONFIG_SH_PCLK_FREQ=41666666 +CONFIG_SH_CLK_CPG=y CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y @@ -305,12 +310,14 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_GUSA=y +# CONFIG_SPARSE_IRQ is not set # # Boot options # CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_ENTRY_OFFSET=0x00001000 # CONFIG_CMDLINE_BOOL is not set # @@ -335,6 +342,7 @@ CONFIG_PM=y CONFIG_PM_SLEEP=y CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y +CONFIG_HIBERNATION_NVS=y CONFIG_HIBERNATION=y CONFIG_PM_STD_PARTITION="" CONFIG_CPU_IDLE=y @@ -451,7 +459,6 @@ CONFIG_I2C_SH_MOBILE=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -484,21 +491,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -570,6 +563,7 @@ CONFIG_RTC_INTF_DEV=y # on-CPU RTC drivers # CONFIG_RTC_DRV_SH=y +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set CONFIG_UIO=y @@ -577,6 +571,10 @@ CONFIG_UIO=y CONFIG_UIO_PDRV_GENIRQ=y # CONFIG_UIO_SMX is not set # CONFIG_UIO_SERCOS3 is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -588,11 +586,13 @@ CONFIG_UIO_PDRV_GENIRQ=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set @@ -657,30 +657,17 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_RING_BUFFER=y +CONFIG_EVENT_TRACING=y +CONFIG_CONTEXT_SWITCH_TRACER=y CONFIG_TRACING=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_FTRACE is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set -# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -705,3 +692,4 @@ CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_GENERIC_ATOMIC64=y diff --git a/arch/sh/configs/sh7763rdp_defconfig b/arch/sh/configs/sh7763rdp_defconfig index f77bc79..b1d9b23 100644 --- a/arch/sh/configs/sh7763rdp_defconfig +++ b/arch/sh/configs/sh7763rdp_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Mon Apr 27 13:10:12 2009 +# Linux kernel version: 2.6.30 +# Thu Jun 18 13:07:15 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -19,6 +19,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_ARCH_SUSPEND_POSSIBLE is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -79,7 +80,6 @@ CONFIG_UID16=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -92,14 +92,19 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set CONFIG_PROFILING=y CONFIG_TRACEPOINTS=y -# CONFIG_MARKERS is not set +CONFIG_MARKERS=y CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set @@ -184,6 +189,7 @@ CONFIG_CPU_SUBTYPE_SH7763=y CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x04000000 CONFIG_29BIT=y @@ -200,7 +206,6 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set -CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y # CONFIG_FLATMEM_MANUAL is not set # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -215,9 +220,9 @@ CONFIG_MIGRATION=y # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # # Cache configuration @@ -246,9 +251,10 @@ CONFIG_SH_SH7763RDP=y # # Timer and clock configuration # -CONFIG_SH_TMU=y -CONFIG_SH_TIMER_IRQ=28 +CONFIG_SH_TIMER_TMU=y CONFIG_SH_PCLK_FREQ=66666666 +CONFIG_SH_CLK_CPG=y +CONFIG_SH_CLK_CPG_LEGACY=y # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -289,12 +295,14 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_GUSA=y +# CONFIG_SPARSE_IRQ is not set # # Boot options # CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttySC2,115200 root=/dev/sda1 rootdelay=10" @@ -377,6 +385,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -396,7 +405,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -536,10 +549,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -556,6 +565,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_LIBFC is not set # CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set @@ -564,7 +574,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -609,6 +618,7 @@ CONFIG_SH_ETH=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -727,22 +737,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -931,10 +926,15 @@ CONFIG_MMC_BLOCK_BOUNCE=y # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -955,10 +955,11 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1109,31 +1110,17 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_RING_BUFFER=y +CONFIG_EVENT_TRACING=y +CONFIG_CONTEXT_SWITCH_TRACER=y CONFIG_TRACING=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_FTRACE is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set -# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -1246,3 +1233,4 @@ CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y diff --git a/arch/sh/configs/sh7770_generic_defconfig b/arch/sh/configs/sh7770_generic_defconfig index d6489b4..426a88f 100644 --- a/arch/sh/configs/sh7770_generic_defconfig +++ b/arch/sh/configs/sh7770_generic_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc4 -# Tue May 12 14:48:21 2009 +# Linux kernel version: 2.6.30 +# Thu Jun 18 13:08:05 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -79,7 +79,6 @@ CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -92,14 +91,19 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_COMPAT_BRK is not set # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y CONFIG_TRACEPOINTS=y -# CONFIG_MARKERS is not set +CONFIG_MARKERS=y CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_IOREMAP_PROT=y @@ -178,6 +182,7 @@ CONFIG_CPU_SUBTYPE_SH7770=y CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MEMORY_START=0x08000000 CONFIG_MEMORY_SIZE=0x04000000 CONFIG_29BIT=y @@ -211,9 +216,9 @@ CONFIG_MIGRATION=y # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # # Cache configuration @@ -240,9 +245,10 @@ CONFIG_CPU_HAS_FPU=y # # Timer and clock configuration # -CONFIG_SH_TMU=y -CONFIG_SH_TIMER_IRQ=16 +CONFIG_SH_TIMER_TMU=y CONFIG_SH_PCLK_FREQ=41666666 +CONFIG_SH_CLK_CPG=y +CONFIG_SH_CLK_CPG_LEGACY=y CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y @@ -299,6 +305,7 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_GUSA=y +# CONFIG_SPARSE_IRQ is not set # # Boot options @@ -328,6 +335,7 @@ CONFIG_BINFMT_ELF=y CONFIG_PM=y # CONFIG_PM_DEBUG is not set CONFIG_PM_SLEEP=y +CONFIG_HIBERNATION_NVS=y CONFIG_HIBERNATION=y CONFIG_PM_STD_PARTITION="" CONFIG_CPU_IDLE=y @@ -444,7 +452,6 @@ CONFIG_I2C_SH_MOBILE=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -477,21 +484,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -571,6 +564,10 @@ CONFIG_UIO=y CONFIG_UIO_PDRV_GENIRQ=y # CONFIG_UIO_SMX is not set # CONFIG_UIO_SERCOS3 is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -582,11 +579,13 @@ CONFIG_UIO_PDRV_GENIRQ=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set @@ -651,23 +650,11 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_RING_BUFFER=y +CONFIG_EVENT_TRACING=y +CONFIG_CONTEXT_SWITCH_TRACER=y CONFIG_TRACING=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_FTRACE is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set @@ -698,3 +685,4 @@ CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_GENERIC_ATOMIC64=y diff --git a/arch/sh/configs/sh7785lcr_32bit_defconfig b/arch/sh/configs/sh7785lcr_32bit_defconfig index 1c55b80..ed316f6 100644 --- a/arch/sh/configs/sh7785lcr_32bit_defconfig +++ b/arch/sh/configs/sh7785lcr_32bit_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Mon Apr 27 13:10:53 2009 +# Linux kernel version: 2.6.30 +# Thu Jun 18 13:08:29 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -21,6 +21,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_SYS_SUPPORTS_NUMA=y CONFIG_SYS_SUPPORTS_PCI=y +CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -80,7 +81,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -93,8 +93,13 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -187,6 +192,7 @@ CONFIG_CPU_SUBTYPE_SH7785=y CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MEMORY_START=0x40000000 CONFIG_MEMORY_SIZE=0x20000000 # CONFIG_29BIT is not set @@ -209,7 +215,6 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set -CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y # CONFIG_FLATMEM_MANUAL is not set # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -224,9 +229,9 @@ CONFIG_MIGRATION=y # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # # Cache configuration @@ -244,7 +249,6 @@ CONFIG_SH_FPU=y CONFIG_SH_STORE_QUEUES=y CONFIG_CPU_HAS_INTEVT=y CONFIG_CPU_HAS_SR_RB=y -CONFIG_CPU_HAS_PTEA=y CONFIG_CPU_HAS_FPU=y # @@ -256,9 +260,9 @@ CONFIG_SH_SH7785LCR=y # # Timer and clock configuration # -CONFIG_SH_TMU=y -CONFIG_SH_TIMER_IRQ=28 +CONFIG_SH_TIMER_TMU=y CONFIG_SH_PCLK_FREQ=50000000 +CONFIG_SH_CLK_CPG=y CONFIG_TICK_ONESHOT=y # CONFIG_NO_HZ is not set CONFIG_HIGH_RES_TIMERS=y @@ -300,12 +304,14 @@ CONFIG_KEXEC=y # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y CONFIG_GUSA=y +# CONFIG_SPARSE_IRQ is not set # # Boot options # CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_ENTRY_OFFSET=0x00001000 # CONFIG_CMDLINE_BOOL is not set # @@ -400,6 +406,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -418,7 +425,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -561,10 +572,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -656,7 +663,6 @@ CONFIG_SATA_SIL=y # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -861,7 +867,6 @@ CONFIG_I2C_PCA_PLATFORM=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -894,22 +899,7 @@ CONFIG_MFD_SM501=y # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1017,7 +1007,7 @@ CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y -# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_DRAGONRISE is not set CONFIG_HID_EZKEY=y # CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y @@ -1034,10 +1024,11 @@ CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y -# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set # CONFIG_HID_TOPSEED is not set -CONFIG_THRUSTMASTER_FF=m -CONFIG_ZEROPLUS_FF=m +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1063,6 +1054,7 @@ CONFIG_USB_MON=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=m # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set @@ -1210,9 +1202,14 @@ CONFIG_RTC_DRV_RS5C372=y # on-CPU RTC drivers # # CONFIG_RTC_DRV_SH is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1232,10 +1229,11 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1428,18 +1426,16 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -1454,10 +1450,8 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_4KSTACKS is not set -# CONFIG_IRQSTACKS is not set # CONFIG_DUMP_CODE is not set # CONFIG_SH_NO_BSS_INIT is not set -# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -1580,3 +1574,4 @@ CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y diff --git a/arch/sh/configs/sh7785lcr_defconfig b/arch/sh/configs/sh7785lcr_defconfig index 4385fe9..004e6f5 100644 --- a/arch/sh/configs/sh7785lcr_defconfig +++ b/arch/sh/configs/sh7785lcr_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Mon Apr 27 13:11:48 2009 +# Linux kernel version: 2.6.30 +# Thu Jun 18 13:09:34 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -21,6 +21,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_SYS_SUPPORTS_NUMA=y CONFIG_SYS_SUPPORTS_PCI=y +CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -80,7 +81,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -93,8 +93,13 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -187,6 +192,7 @@ CONFIG_CPU_SUBTYPE_SH7785=y CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MEMORY_START=0x08000000 CONFIG_MEMORY_SIZE=0x08000000 CONFIG_29BIT=y @@ -204,7 +210,6 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set -CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -217,9 +222,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # # Cache configuration @@ -237,7 +242,6 @@ CONFIG_SH_FPU=y CONFIG_SH_STORE_QUEUES=y CONFIG_CPU_HAS_INTEVT=y CONFIG_CPU_HAS_SR_RB=y -CONFIG_CPU_HAS_PTEA=y CONFIG_CPU_HAS_FPU=y # @@ -250,9 +254,9 @@ CONFIG_SH_SH7785LCR_29BIT_PHYSMAPS=y # # Timer and clock configuration # -CONFIG_SH_TMU=y -CONFIG_SH_TIMER_IRQ=28 +CONFIG_SH_TIMER_TMU=y CONFIG_SH_PCLK_FREQ=50000000 +CONFIG_SH_CLK_CPG=y CONFIG_TICK_ONESHOT=y # CONFIG_NO_HZ is not set CONFIG_HIGH_RES_TIMERS=y @@ -294,12 +298,14 @@ CONFIG_KEXEC=y # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y CONFIG_GUSA=y +# CONFIG_SPARSE_IRQ is not set # # Boot options # CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_ENTRY_OFFSET=0x00001000 # CONFIG_CMDLINE_BOOL is not set # @@ -394,6 +400,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -412,7 +419,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -555,10 +566,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -650,7 +657,6 @@ CONFIG_SATA_SIL=y # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -855,7 +861,6 @@ CONFIG_I2C_PCA_PLATFORM=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -888,22 +893,7 @@ CONFIG_MFD_SM501=y # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1011,7 +1001,7 @@ CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y -# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_DRAGONRISE is not set CONFIG_HID_EZKEY=y # CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y @@ -1028,10 +1018,11 @@ CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y -# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set # CONFIG_HID_TOPSEED is not set -CONFIG_THRUSTMASTER_FF=m -CONFIG_ZEROPLUS_FF=m +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1057,6 +1048,7 @@ CONFIG_USB_MON=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=m # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set @@ -1204,9 +1196,14 @@ CONFIG_RTC_DRV_RS5C372=y # on-CPU RTC drivers # # CONFIG_RTC_DRV_SH is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1226,10 +1223,11 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1422,18 +1420,16 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -1448,10 +1444,8 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_4KSTACKS is not set -# CONFIG_IRQSTACKS is not set # CONFIG_DUMP_CODE is not set # CONFIG_SH_NO_BSS_INIT is not set -# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -1574,3 +1568,4 @@ CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y diff --git a/arch/sh/configs/shmin_defconfig b/arch/sh/configs/shmin_defconfig index 4e12025..ad7d609 100644 --- a/arch/sh/configs/shmin_defconfig +++ b/arch/sh/configs/shmin_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Mon Apr 27 13:12:41 2009 +# Linux kernel version: 2.6.30 +# Thu Jun 18 13:10:33 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -18,6 +18,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_ARCH_SUSPEND_POSSIBLE is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -64,7 +65,6 @@ CONFIG_EMBEDDED=y # CONFIG_UID16 is not set # CONFIG_SYSCTL_SYSCALL is not set # CONFIG_KALLSYMS is not set -# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y # CONFIG_BUG is not set @@ -77,7 +77,12 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y # CONFIG_SHMEM is not set CONFIG_AIO=y + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set # CONFIG_SLUB is not set @@ -159,6 +164,7 @@ CONFIG_CPU_SUBTYPE_SH7706=y CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x00800000 CONFIG_29BIT=y @@ -173,7 +179,6 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set -CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -186,9 +191,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # # Cache configuration @@ -216,9 +221,10 @@ CONFIG_SH_SHMIN=y # # Timer and clock configuration # -CONFIG_SH_TMU=y -CONFIG_SH_TIMER_IRQ=16 +CONFIG_SH_TIMER_TMU=y CONFIG_SH_PCLK_FREQ=32000000 +CONFIG_SH_CLK_CPG=y +CONFIG_SH_CLK_CPG_LEGACY=y # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -260,12 +266,14 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT is not set CONFIG_GUSA=y # CONFIG_GUSA_RB is not set +# CONFIG_SPARSE_IRQ is not set # # Boot options # CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00210000 +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttySC1,115200 root=1f01 mtdparts=phys_mapped_flash:64k(firm)ro,-(sys) netdev=34,0x300,eth0 " @@ -345,6 +353,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -362,7 +371,11 @@ CONFIG_WIRELESS=y # CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -489,7 +502,6 @@ CONFIG_HAVE_IDE=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -514,6 +526,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set CONFIG_NETDEV_1000=y CONFIG_NETDEV_10000=y @@ -599,22 +612,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -653,10 +651,15 @@ CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -668,11 +671,13 @@ CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set @@ -773,27 +778,13 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_FTRACE is not set # CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_SH_STANDARD_BIOS=y # CONFIG_EARLY_SCIF_CONSOLE is not set CONFIG_EARLY_PRINTK=y -# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -905,3 +896,4 @@ CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y diff --git a/arch/sh/configs/shx3_defconfig b/arch/sh/configs/shx3_defconfig index c088144..207b0c9 100644 --- a/arch/sh/configs/shx3_defconfig +++ b/arch/sh/configs/shx3_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Mon Apr 27 13:13:12 2009 +# Linux kernel version: 2.6.30 +# Thu Jun 18 13:11:03 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -23,6 +23,7 @@ CONFIG_GENERIC_LOCKBREAK=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_SYS_SUPPORTS_SMP=y CONFIG_SYS_SUPPORTS_NUMA=y +CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set @@ -98,7 +99,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -111,14 +111,19 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set # CONFIG_SLUB is not set CONFIG_SLOB=y CONFIG_PROFILING=y CONFIG_TRACEPOINTS=y -# CONFIG_MARKERS is not set +CONFIG_MARKERS=y CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y @@ -207,6 +212,7 @@ CONFIG_CPU_SUBTYPE_SHX3=y CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_FORCE_MAX_ZONEORDER=7 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x04000000 CONFIG_29BIT=y @@ -226,7 +232,6 @@ CONFIG_ARCH_MEMORY_PROBE=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set CONFIG_PAGE_SIZE_64KB=y -CONFIG_ENTRY_OFFSET=0x00010000 # CONFIG_HUGETLB_PAGE_SIZE_64K is not set # CONFIG_HUGETLB_PAGE_SIZE_256K is not set CONFIG_HUGETLB_PAGE_SIZE_1MB=y @@ -249,9 +254,9 @@ CONFIG_MIGRATION=y # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # # Cache configuration @@ -279,9 +284,10 @@ CONFIG_SH_X3PROTO=y # # Timer and clock configuration # -CONFIG_SH_TMU=y -CONFIG_SH_TIMER_IRQ=16 +CONFIG_SH_TIMER_TMU=y CONFIG_SH_PCLK_FREQ=50000000 +CONFIG_SH_CLK_CPG=y +CONFIG_SH_CLK_CPG_LEGACY=y CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y @@ -339,12 +345,14 @@ CONFIG_NR_CPUS=4 # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y +# CONFIG_SPARSE_IRQ is not set # # Boot options # -CONFIG_ZERO_PAGE_OFFSET=0x00001000 +CONFIG_ZERO_PAGE_OFFSET=0x00010000 CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_ENTRY_OFFSET=0x00010000 CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=bios ignore_loglevel" @@ -444,6 +452,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -462,6 +471,7 @@ CONFIG_CAN_BCM=m # CAN Device Drivers # CONFIG_CAN_VCAN=m +# CONFIG_CAN_DEV is not set # CONFIG_CAN_DEBUG_DEVICES is not set # CONFIG_IRDA is not set # CONFIG_BT is not set @@ -512,6 +522,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_AT25 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -535,10 +546,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -555,6 +562,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_LIBFC is not set # CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set @@ -568,7 +576,6 @@ CONFIG_ATA_SFF=y CONFIG_PATA_PLATFORM=y # CONFIG_MD is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -594,6 +601,7 @@ CONFIG_SMC91X=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -701,7 +709,6 @@ CONFIG_I2C_HELPER_AUTO=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -758,22 +765,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -885,6 +877,7 @@ CONFIG_USB_GADGET_SELECTED=y # CONFIG_USB_GADGET_OMAP is not set # CONFIG_USB_GADGET_PXA25X is not set # CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C_HSOTG is not set # CONFIG_USB_GADGET_S3C2410 is not set # CONFIG_USB_GADGET_IMX is not set CONFIG_USB_GADGET_M66592=y @@ -894,9 +887,11 @@ CONFIG_USB_M66592=y # CONFIG_USB_GADGET_CI13XXX is not set # CONFIG_USB_GADGET_NET2280 is not set # CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LANGWELL is not set # CONFIG_USB_GADGET_DUMMY_HCD is not set CONFIG_USB_GADGET_DUALSPEED=y # CONFIG_USB_ZERO is not set +# CONFIG_USB_AUDIO is not set # CONFIG_USB_ETH is not set # CONFIG_USB_GADGETFS is not set # CONFIG_USB_FILE_STORAGE is not set @@ -974,6 +969,7 @@ CONFIG_RTC_INTF_DEV=y # on-CPU RTC drivers # CONFIG_RTC_DRV_SH=y +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set CONFIG_UIO=m @@ -981,6 +977,10 @@ CONFIG_UIO=m # CONFIG_UIO_PDRV_GENIRQ is not set # CONFIG_UIO_SMX is not set # CONFIG_UIO_SERCOS3 is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1001,10 +1001,11 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1077,7 +1078,46 @@ CONFIG_NETWORK_FILESYSTEMS=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y -# CONFIG_NLS is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set # @@ -1138,25 +1178,25 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_RING_BUFFER=y +CONFIG_EVENT_TRACING=y +CONFIG_CONTEXT_SWITCH_TRACER=y CONFIG_TRACING=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_RING_BUFFER_BENCHMARK is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set @@ -1168,10 +1208,8 @@ CONFIG_EARLY_PRINTK=y # CONFIG_DEBUG_BOOTMEM is not set CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACK_USAGE=y -# CONFIG_IRQSTACKS is not set CONFIG_DUMP_CODE=y # CONFIG_SH_NO_BSS_INIT is not set -# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -1285,3 +1323,4 @@ CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y diff --git a/arch/sh/configs/snapgear_defconfig b/arch/sh/configs/snapgear_defconfig index 54a7a3c..ca3c88a 100644 --- a/arch/sh/configs/snapgear_defconfig +++ b/arch/sh/configs/snapgear_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Mon Apr 27 13:14:00 2009 +# Linux kernel version: 2.6.30 +# Thu Jun 18 13:11:58 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -20,6 +20,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_ARCH_SUSPEND_POSSIBLE is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_SYS_SUPPORTS_PCI=y +CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -73,7 +74,6 @@ CONFIG_UID16=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y @@ -86,8 +86,13 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -171,6 +176,7 @@ CONFIG_CPU_SUBTYPE_SH7751R=y CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MEMORY_START=0x08000000 CONFIG_MEMORY_SIZE=0x01000000 CONFIG_29BIT=y @@ -185,7 +191,6 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set -CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -198,9 +203,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # # Cache configuration @@ -219,7 +224,6 @@ CONFIG_SH_FPU=y CONFIG_CPU_HAS_INTEVT=y CONFIG_CPU_HAS_IPR_IRQ=y CONFIG_CPU_HAS_SR_RB=y -CONFIG_CPU_HAS_PTEA=y CONFIG_CPU_HAS_FPU=y # @@ -235,9 +239,10 @@ CONFIG_SH_SECUREEDGE5410=y # # Timer and clock configuration # -CONFIG_SH_TMU=y -CONFIG_SH_TIMER_IRQ=16 +CONFIG_SH_TIMER_TMU=y CONFIG_SH_PCLK_FREQ=60000000 +CONFIG_SH_CLK_CPG=y +CONFIG_SH_CLK_CPG_LEGACY=y # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -283,12 +288,14 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT is not set CONFIG_GUSA=y # CONFIG_GUSA_RB is not set +# CONFIG_SPARSE_IRQ is not set # # Boot options # CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_ENTRY_OFFSET=0x00001000 # CONFIG_UBC_WAKEUP is not set # CONFIG_CMDLINE_BOOL is not set @@ -366,6 +373,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -383,7 +391,11 @@ CONFIG_WIRELESS=y # CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -528,7 +540,6 @@ CONFIG_HAVE_IDE=y # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -581,6 +592,7 @@ CONFIG_8139TOO_PIO=y # CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set +# CONFIG_KS8842 is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set @@ -695,22 +707,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -734,10 +731,15 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set +CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -751,12 +753,14 @@ CONFIG_EXT2_FS=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set @@ -855,27 +859,12 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set -# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -905,3 +894,4 @@ CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y diff --git a/arch/sh/configs/systemh_defconfig b/arch/sh/configs/systemh_defconfig index dbe7e54..5d97026 100644 --- a/arch/sh/configs/systemh_defconfig +++ b/arch/sh/configs/systemh_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Mon Apr 27 13:14:33 2009 +# Linux kernel version: 2.6.30 +# Thu Jun 18 13:12:28 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -19,6 +19,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_ARCH_SUSPEND_POSSIBLE is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -70,7 +71,6 @@ CONFIG_UID16=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y @@ -83,7 +83,12 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -173,6 +178,7 @@ CONFIG_CPU_SUBTYPE_SH7751R=y CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x00400000 CONFIG_29BIT=y @@ -187,7 +193,6 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set -CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -200,9 +205,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # # Cache configuration @@ -220,7 +225,6 @@ CONFIG_SH_FPU=y # CONFIG_SH_STORE_QUEUES is not set CONFIG_CPU_HAS_INTEVT=y CONFIG_CPU_HAS_SR_RB=y -CONFIG_CPU_HAS_PTEA=y CONFIG_CPU_HAS_FPU=y # @@ -236,9 +240,10 @@ CONFIG_SH_7751_SYSTEMH=y # # Timer and clock configuration # -CONFIG_SH_TMU=y -CONFIG_SH_TIMER_IRQ=16 +CONFIG_SH_TIMER_TMU=y CONFIG_SH_PCLK_FREQ=60000000 +CONFIG_SH_CLK_CPG=y +CONFIG_SH_CLK_CPG_LEGACY=y # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -280,12 +285,14 @@ CONFIG_HZ=250 CONFIG_PREEMPT=y CONFIG_GUSA=y # CONFIG_GUSA_RB is not set +# CONFIG_SPARSE_IRQ is not set # # Boot options # CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_ENTRY_OFFSET=0x00001000 # CONFIG_UBC_WAKEUP is not set # CONFIG_CMDLINE_BOOL is not set @@ -428,21 +435,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -481,10 +474,15 @@ CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -496,9 +494,10 @@ CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -590,28 +589,12 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_PREEMPT_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set -# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -640,3 +623,4 @@ CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_GENERIC_ATOMIC64=y diff --git a/arch/sh/configs/titan_defconfig b/arch/sh/configs/titan_defconfig index 8ca94ef..7ad080e 100644 --- a/arch/sh/configs/titan_defconfig +++ b/arch/sh/configs/titan_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Mon Apr 27 13:14:55 2009 +# Linux kernel version: 2.6.30 +# Thu Jun 18 13:12:54 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -20,6 +20,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_ARCH_SUSPEND_POSSIBLE is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_SYS_SUPPORTS_PCI=y +CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -77,7 +78,6 @@ CONFIG_UID16=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -90,8 +90,13 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -181,6 +186,7 @@ CONFIG_CPU_SUBTYPE_SH7751R=y CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MEMORY_START=0x08030000 CONFIG_MEMORY_SIZE=0x7fd0000 CONFIG_29BIT=y @@ -195,7 +201,6 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set -CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -208,9 +213,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # # Cache configuration @@ -229,7 +234,6 @@ CONFIG_SH_FPU=y CONFIG_CPU_HAS_INTEVT=y CONFIG_CPU_HAS_IPR_IRQ=y CONFIG_CPU_HAS_SR_RB=y -CONFIG_CPU_HAS_PTEA=y CONFIG_CPU_HAS_FPU=y # @@ -245,9 +249,10 @@ CONFIG_SH_TITAN=y # # Timer and clock configuration # -CONFIG_SH_TMU=y -CONFIG_SH_TIMER_IRQ=16 +CONFIG_SH_TIMER_TMU=y CONFIG_SH_PCLK_FREQ=30000000 +CONFIG_SH_CLK_CPG=y +CONFIG_SH_CLK_CPG_LEGACY=y # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -293,12 +298,14 @@ CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set CONFIG_GUSA=y # CONFIG_GUSA_RB is not set +# CONFIG_SPARSE_IRQ is not set # # Boot options # CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x009e0000 +CONFIG_ENTRY_OFFSET=0x00001000 # CONFIG_UBC_WAKEUP is not set CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttySC1,38400N81 root=/dev/nfs ip=:::::eth1:autoconf rw" @@ -417,6 +424,7 @@ CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m # CONFIG_NF_CONNTRACK is not set +# CONFIG_NETFILTER_TPROXY is not set CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m # CONFIG_NETFILTER_XT_TARGET_DSCP is not set @@ -454,6 +462,7 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # CONFIG_NETFILTER_XT_MATCH_TIME is not set # CONFIG_NETFILTER_XT_MATCH_U32 is not set +# CONFIG_NETFILTER_XT_MATCH_OSF is not set # CONFIG_IP_VS is not set # @@ -517,6 +526,7 @@ CONFIG_LLC=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set CONFIG_NET_SCHED=y # @@ -589,7 +599,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -731,6 +745,7 @@ CONFIG_MISC_DEVICES=y # EEPROM support # # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -754,10 +769,6 @@ CONFIG_BLK_DEV_SR=m # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=m # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -775,6 +786,7 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -783,6 +795,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set @@ -797,7 +810,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_QLOGIC_1280 is not set @@ -826,7 +838,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_IFB is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set @@ -898,6 +909,7 @@ CONFIG_8139_OLD_RX_RESET=y # CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set +# CONFIG_KS8842 is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set @@ -965,6 +977,7 @@ CONFIG_USB_RTL8150=m CONFIG_USB_USBNET=m CONFIG_USB_NET_AX8817X=m CONFIG_USB_NET_CDCETHER=m +# CONFIG_USB_NET_CDC_EEM is not set # CONFIG_USB_NET_DM9601 is not set # CONFIG_USB_NET_SMSC95XX is not set # CONFIG_USB_NET_GL620A is not set @@ -974,6 +987,7 @@ CONFIG_USB_NET_PLUSB=m # CONFIG_USB_NET_RNDIS_HOST is not set # CONFIG_USB_NET_CDC_SUBSET is not set CONFIG_USB_NET_ZAURUS=m +# CONFIG_USB_NET_INT51X1 is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -1130,22 +1144,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1211,6 +1210,7 @@ CONFIG_USB_MON=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y @@ -1350,7 +1350,7 @@ CONFIG_USB_SERIAL_PL2303=m # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set -CONFIG_RTC_LIB=m +CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=m # @@ -1384,9 +1384,14 @@ CONFIG_RTC_INTF_DEV=y # on-CPU RTC drivers # CONFIG_RTC_DRV_SH=m +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1406,7 +1411,6 @@ CONFIG_REISERFS_FS=m # CONFIG_REISERFS_FS_XATTR is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y CONFIG_XFS_FS=m # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_POSIX_ACL is not set @@ -1414,6 +1418,8 @@ CONFIG_XFS_FS=m # CONFIG_XFS_DEBUG is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1421,6 +1427,7 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set CONFIG_FUSE_FS=m +# CONFIG_CUSE is not set # # Caches @@ -1533,7 +1540,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # CONFIG_SYSV68_PARTITION is not set -CONFIG_NLS=m +CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=m # CONFIG_NLS_CODEPAGE_737 is not set @@ -1626,17 +1633,15 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -1645,16 +1650,15 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_DEBUG_BOOTMEM is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_4KSTACKS is not set -# CONFIG_IRQSTACKS is not set # CONFIG_DUMP_CODE is not set # CONFIG_SH_NO_BSS_INIT is not set -# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -1787,3 +1791,4 @@ CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y diff --git a/arch/sh/configs/ul2_defconfig b/arch/sh/configs/ul2_defconfig index bfb4d98..608fe56 100644 --- a/arch/sh/configs/ul2_defconfig +++ b/arch/sh/configs/ul2_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Mon Apr 27 13:17:05 2009 +# Linux kernel version: 2.6.30 +# Thu Jun 18 13:14:36 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -21,6 +21,7 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_SYS_SUPPORTS_NUMA=y CONFIG_SYS_SUPPORTS_CMT=y +CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -78,7 +79,6 @@ CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -91,8 +91,13 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -187,6 +192,7 @@ CONFIG_CPU_SUBTYPE_SH7366=y CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MEMORY_START=0x08000000 CONFIG_MEMORY_SIZE=0x01f00000 CONFIG_29BIT=y @@ -205,7 +211,6 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set -CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_HUGETLB_PAGE_SIZE_64K=y # CONFIG_HUGETLB_PAGE_SIZE_256K is not set # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set @@ -226,9 +231,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # # Cache configuration @@ -247,7 +252,6 @@ CONFIG_CPU_LITTLE_ENDIAN=y # CONFIG_SH_STORE_QUEUES is not set CONFIG_CPU_HAS_INTEVT=y CONFIG_CPU_HAS_SR_RB=y -CONFIG_CPU_HAS_PTEA=y CONFIG_CPU_HAS_DSP=y # @@ -257,10 +261,10 @@ CONFIG_CPU_HAS_DSP=y # # Timer and clock configuration # -CONFIG_SH_TMU=y +CONFIG_SH_TIMER_TMU=y # CONFIG_SH_TIMER_CMT is not set -CONFIG_SH_TIMER_IRQ=16 CONFIG_SH_PCLK_FREQ=33333333 +CONFIG_SH_CLK_CPG=y CONFIG_TICK_ONESHOT=y # CONFIG_NO_HZ is not set CONFIG_HIGH_RES_TIMERS=y @@ -302,12 +306,14 @@ CONFIG_KEXEC=y # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y CONFIG_GUSA=y +# CONFIG_SPARSE_IRQ is not set # # Boot options # CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/nfs ip=dhcp" @@ -390,6 +396,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -411,6 +418,8 @@ CONFIG_WIRELESS_EXT_SYSFS=y CONFIG_LIB80211=m # CONFIG_LIB80211_DEBUG is not set CONFIG_MAC80211=y +CONFIG_MAC80211_DEFAULT_PS=y +CONFIG_MAC80211_DEFAULT_PS_VALUE=1 # # Rate control algorithm selection @@ -565,10 +574,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -585,6 +590,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_LIBFC is not set # CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set @@ -598,7 +604,6 @@ CONFIG_ATA_SFF=y CONFIG_PATA_PLATFORM=y # CONFIG_MD is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -623,6 +628,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -648,6 +654,7 @@ CONFIG_LIBERTAS_DEBUG=y # CONFIG_B43LEGACY is not set # CONFIG_ZD1211RW is not set # CONFIG_RT2X00 is not set +# CONFIG_IWM is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -663,6 +670,7 @@ CONFIG_LIBERTAS_DEBUG=y CONFIG_USB_USBNET=y CONFIG_USB_NET_AX8817X=y CONFIG_USB_NET_CDCETHER=y +# CONFIG_USB_NET_CDC_EEM is not set # CONFIG_USB_NET_DM9601 is not set # CONFIG_USB_NET_SMSC95XX is not set # CONFIG_USB_NET_GL620A is not set @@ -672,6 +680,7 @@ CONFIG_USB_NET_CDCETHER=y # CONFIG_USB_NET_RNDIS_HOST is not set # CONFIG_USB_NET_CDC_SUBSET is not set # CONFIG_USB_NET_ZAURUS is not set +# CONFIG_USB_NET_INT51X1 is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -774,22 +783,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -926,10 +920,15 @@ CONFIG_MMC_BLOCK_BOUNCE=y # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -949,10 +948,11 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1106,28 +1106,12 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_PREEMPT_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set -# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -1252,3 +1236,4 @@ CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y diff --git a/arch/sh/configs/urquell_defconfig b/arch/sh/configs/urquell_defconfig index 512664f..ee1987e 100644 --- a/arch/sh/configs/urquell_defconfig +++ b/arch/sh/configs/urquell_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Mon Apr 27 14:02:55 2009 +# Linux kernel version: 2.6.30 +# Thu Jun 18 13:15:28 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -20,6 +20,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_ARCH_SUSPEND_POSSIBLE is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_SYS_SUPPORTS_NUMA=y +CONFIG_SYS_SUPPORTS_PCI=y +CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -34,25 +36,30 @@ CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set -# CONFIG_AUDIT is not set +CONFIG_AUDIT=y +CONFIG_AUDITSYSCALL=y +CONFIG_AUDIT_TREE=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set +# CONFIG_CLASSIC_RCU is not set +CONFIG_TREE_RCU=y # CONFIG_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set # CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y @@ -60,15 +67,29 @@ CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set -# CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_RT_GROUP_SCHED=y +# CONFIG_USER_SCHED is not set +CONFIG_CGROUP_SCHED=y +CONFIG_CGROUPS=y +CONFIG_CGROUP_DEBUG=y +CONFIG_CGROUP_NS=y +CONFIG_CGROUP_FREEZER=y +CONFIG_CGROUP_DEVICE=y +CONFIG_CPUSETS=y +# CONFIG_PROC_PID_CPUSET is not set +CONFIG_CGROUP_CPUACCT=y +CONFIG_RESOURCE_COUNTERS=y +CONFIG_CGROUP_MEM_RES_CTLR=y +CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y +CONFIG_MM_OWNER=y +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set -# CONFIG_BLK_DEV_INITRD is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -76,8 +97,8 @@ CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -90,13 +111,20 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set CONFIG_PROFILING=y -# CONFIG_MARKERS is not set +CONFIG_TRACEPOINTS=y +CONFIG_MARKERS=y # CONFIG_OPROFILE is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set @@ -129,12 +157,12 @@ CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set +CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="cfq" -# CONFIG_FREEZER is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_FREEZER=y # # System type @@ -183,6 +211,7 @@ CONFIG_CPU_SUBTYPE_SH7786=y CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MEMORY_START=0x08000000 CONFIG_MEMORY_SIZE=0x08000000 CONFIG_29BIT=y @@ -201,7 +230,12 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set -CONFIG_ENTRY_OFFSET=0x00001000 +CONFIG_HUGETLB_PAGE_SIZE_64K=y +# CONFIG_HUGETLB_PAGE_SIZE_256K is not set +# CONFIG_HUGETLB_PAGE_SIZE_1MB is not set +# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set +# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set +# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set CONFIG_SELECT_MEMORY_MODEL=y # CONFIG_FLATMEM_MANUAL is not set # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -216,9 +250,9 @@ CONFIG_MIGRATION=y # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # # Cache configuration @@ -247,9 +281,10 @@ CONFIG_SH_URQUELL=y # # Timer and clock configuration # -CONFIG_SH_TMU=y -CONFIG_SH_TIMER_IRQ=16 +CONFIG_SH_TIMER_TMU=y CONFIG_SH_PCLK_FREQ=33333333 +CONFIG_SH_CLK_CPG=y +CONFIG_SH_CLK_CPG_LEGACY=y CONFIG_TICK_ONESHOT=y # CONFIG_NO_HZ is not set CONFIG_HIGH_RES_TIMERS=y @@ -286,25 +321,37 @@ CONFIG_HZ=250 CONFIG_SCHED_HRTICK=y CONFIG_KEXEC=y # CONFIG_CRASH_DUMP is not set -# CONFIG_SECCOMP is not set -# CONFIG_PREEMPT_NONE is not set +CONFIG_SECCOMP=y +CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set -CONFIG_PREEMPT=y +# CONFIG_PREEMPT is not set CONFIG_GUSA=y +CONFIG_SPARSE_IRQ=y # # Boot options # CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 -CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="console=ttySC1, 38400 earlyprintk=serial ip=on ignore_loglevel root=/dev/nfs ip=dhcp memchunk.vpu=4m" +CONFIG_ENTRY_OFFSET=0x00001000 +# CONFIG_CMDLINE_BOOL is not set # # Bus options # +CONFIG_PCI=y +# CONFIG_SH_PCIDMA_NONCOHERENT is not set +CONFIG_PCIEPORTBUS=y +CONFIG_PCIEAER=y +CONFIG_PCIEASPM=y +CONFIG_PCIEASPM_DEBUG=y # CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCI_LEGACY is not set +CONFIG_PCI_DEBUG=y +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set # # Executable file formats @@ -312,13 +359,16 @@ CONFIG_CMDLINE="console=ttySC1, 38400 earlyprintk=serial ip=on ignore_loglevel r CONFIG_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_HAVE_AOUT is not set -# CONFIG_BINFMT_MISC is not set +CONFIG_BINFMT_MISC=y # # Power management options (EXPERIMENTAL) # -# CONFIG_PM is not set -# CONFIG_CPU_IDLE is not set +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +# CONFIG_HIBERNATION is not set +CONFIG_CPU_IDLE=y +CONFIG_CPU_IDLE_GOV_LADDER=y CONFIG_NET=y # @@ -384,6 +434,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -391,6 +442,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # Network testing # # CONFIG_NET_PKTGEN is not set +# CONFIG_NET_DROP_MONITOR is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set @@ -402,7 +454,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -418,6 +474,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=y @@ -473,11 +531,13 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_PHYSMAP=y # CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_INTEL_VR_NOR is not set # CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers # +# CONFIG_MTD_PMC551 is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -503,9 +563,13 @@ CONFIG_MTD_PHYSMAP=y # CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 @@ -537,10 +601,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -561,24 +621,90 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y +# CONFIG_SATA_AHCI is not set +CONFIG_SATA_SIL24=y CONFIG_ATA_SFF=y +# CONFIG_SATA_SVW is not set +# CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set # CONFIG_MD is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# Enable only one of the two stacks, unless you know what you are doing +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set +# CONFIG_ARCNET is not set CONFIG_PHYLIB=y # # MII PHY device drivers # -# CONFIG_MARVELL_PHY is not set +CONFIG_MARVELL_PHY=y # CONFIG_DAVICOM_PHY is not set # CONFIG_QSEMI_PHY is not set # CONFIG_LXT_PHY is not set @@ -597,11 +723,17 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set # CONFIG_STNIC is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set CONFIG_SMC91X=y # CONFIG_ETHOC is not set # CONFIG_SMC911X is not set # CONFIG_SMSC911X is not set # CONFIG_DNET is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -609,9 +741,54 @@ CONFIG_SMC91X=y # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set -# CONFIG_NETDEV_1000 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_E100 is not set +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +CONFIG_8139CP=y +# CONFIG_8139TOO is not set +# CONFIG_R6040 is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_KS8842 is not set +# CONFIG_VIA_RHINE is not set +# CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set +CONFIG_NETDEV_1000=y +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set +# CONFIG_IGBVF is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +CONFIG_SKY2=y +CONFIG_SKY2_DEBUG=y +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set +# CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set +# CONFIG_TR is not set # # Wireless LAN @@ -632,8 +809,11 @@ CONFIG_SMC91X=y # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set # CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set +# CONFIG_NET_FC is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -692,6 +872,7 @@ CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -706,6 +887,7 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=6 CONFIG_SERIAL_SH_SCI_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -714,8 +896,10 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_HW_RANDOM=y # CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y # CONFIG_I2C_CHARDEV is not set @@ -727,6 +911,24 @@ CONFIG_I2C_ALGOPCA=y # # +# PC SMBus host controller drivers +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_ISCH is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set + +# # I2C system bus drivers (mostly embedded / system-on-chip) # # CONFIG_I2C_GPIO is not set @@ -742,6 +944,11 @@ CONFIG_I2C_ALGOPCA=y # CONFIG_I2C_TINY_USB is not set # +# Graphics adapter I2C/DDC channel drivers +# +# CONFIG_I2C_VOODOO3 is not set + +# # Other I2C/SMBus bus drivers # CONFIG_I2C_PCA_PLATFORM=y @@ -754,7 +961,6 @@ CONFIG_I2C_PCA_PLATFORM=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -763,6 +969,7 @@ CONFIG_I2C_PCA_PLATFORM=y # CONFIG_SPI is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set # CONFIG_GPIO_SYSFS is not set # @@ -779,15 +986,79 @@ CONFIG_GPIOLIB=y # # PCI GPIO expanders: # +# CONFIG_GPIO_BT8XX is not set # # SPI GPIO expanders: # # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_I5K_AMB is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set +CONFIG_THERMAL_HWMON=y # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -811,10 +1082,7 @@ CONFIG_MFD_SM501=y # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# +CONFIG_MEDIA_SUPPORT=y # # Multimedia core support @@ -831,6 +1099,7 @@ CONFIG_MFD_SM501=y # # Graphics support # +# CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set CONFIG_FB=y @@ -856,7 +1125,31 @@ CONFIG_FB_DEFERRED_IO=y # # Frame buffer hardware drivers # +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set # CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set CONFIG_FB_SH_MOBILE_LCDC=m CONFIG_FB_SM501=y # CONFIG_FB_VIRTUAL is not set @@ -909,7 +1202,7 @@ CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y -# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_DRAGONRISE is not set CONFIG_HID_EZKEY=y # CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y @@ -926,14 +1219,15 @@ CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y -# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set # CONFIG_HID_TOPSEED is not set -CONFIG_THRUSTMASTER_FF=m -CONFIG_ZEROPLUS_FF=m +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y -# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set CONFIG_USB_ANNOUNCE_NEW_DEVICES=y @@ -944,6 +1238,7 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set @@ -955,12 +1250,19 @@ CONFIG_USB_MON=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set +# CONFIG_USB_EHCI_HCD is not set # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set -# CONFIG_USB_OHCI_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set # CONFIG_USB_HWA_HCD is not set # @@ -1034,14 +1336,74 @@ CONFIG_USB_STORAGE=y # # CONFIG_USB_GPIO_VBUS is not set # CONFIG_NOP_USB_XCEIV is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set -# CONFIG_RTC_CLASS is not set +# CONFIG_INFINIBAND is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_SH=y +CONFIG_RTC_DRV_GENERIC=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1055,16 +1417,25 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4_FS is not set +CONFIG_EXT4_FS=y +# CONFIG_EXT4DEV_COMPAT is not set +CONFIG_EXT4_FS_XATTR=y +# CONFIG_EXT4_FS_POSIX_ACL is not set +# CONFIG_EXT4_FS_SECURITY is not set CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_JBD2=y +# CONFIG_JBD2_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y -CONFIG_FILE_LOCKING=y +# CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_BTRFS_FS is not set +CONFIG_BTRFS_FS=y +# CONFIG_BTRFS_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1106,9 +1477,9 @@ CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLBFS is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set +CONFIG_HUGETLBFS=y +CONFIG_HUGETLB_PAGE=y +CONFIG_CONFIGFS_FS=y CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set @@ -1121,7 +1492,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set -CONFIG_MINIX_FS=y +# CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set @@ -1135,13 +1506,9 @@ CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y -CONFIG_NFSD=y -CONFIG_NFSD_V3=y -# CONFIG_NFSD_V3_ACL is not set -CONFIG_NFSD_V4=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y @@ -1204,46 +1571,74 @@ CONFIG_NLS_ISO8859_1=y # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y -# CONFIG_PRINTK_TIME is not set +CONFIG_PRINTK_TIME=y # CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +CONFIG_FRAME_POINTER=y +# CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_PAGE_POISONING is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_PREEMPT_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_SH_STANDARD_BIOS is not set -# CONFIG_EARLY_SCIF_CONSOLE is not set -# CONFIG_MORE_COMPILE_OPTIONS is not set +CONFIG_EARLY_SCIF_CONSOLE=y +CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffeb0000 +CONFIG_EARLY_PRINTK=y +# CONFIG_DEBUG_BOOTMEM is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_4KSTACKS is not set +# CONFIG_DUMP_CODE is not set +# CONFIG_SH_NO_BSS_INIT is not set # # Security options @@ -1303,7 +1698,7 @@ CONFIG_CRYPTO_HMAC=y # # Digest # -# CONFIG_CRYPTO_CRC32C is not set +CONFIG_CRYPTO_CRC32C=y # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set @@ -1356,13 +1751,18 @@ CONFIG_CRYPTO_DES=y CONFIG_BITREVERSE=y CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set +CONFIG_CRC16=y # CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set -# CONFIG_LIBCRC32C is not set +CONFIG_LIBCRC32C=y +CONFIG_AUDIT_GENERIC=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y -- cgit v1.1 From 2e04bc76560decd9270be2a805927316f617ef56 Mon Sep 17 00:00:00 2001 From: Alexander van Heukelum <heukelum@fastmail.fm> Date: Thu, 18 Jun 2009 00:35:57 +0200 Subject: i386: fix return to 16-bit stack from NMI handler Returning to a task with a 16-bit stack requires special care: the iret instruction does not restore the high word of esp in that case. The espfix code fixes this, but currently is not invoked on NMIs. This means that a running task gets the upper word of esp clobbered due intervening NMIs. To reproduce, compile and run the following program with the nmi watchdog enabled (nmi_watchdog=2 on the command line). Using gdb you can see that the high bits of esp contain garbage, while the low bits are still correct. This patch puts the espfix code back into the NMI code path. The patch is slightly complicated due to the irqtrace infrastructure not being NMI-safe. The NMI return path cannot call TRACE_IRQS_IRET. Otherwise, the tail of the normal iret-code is correct for the nmi code path too. To be able to share this code-path, the TRACE_IRQS_IRET was move up a bit. The espfix code exists after the TRACE_IRQS_IRET, but this code explicitly disables interrupts. This short interrupts-off section is now not traced anymore. The return-to-kernel path now always includes the preliminary test to decide if the espfix code should be called. This is never the case, but doing it this way keeps the patch as simple as possible and the few extra instructions should not affect timing in any significant way. #define _GNU_SOURCE #include <stdio.h> #include <sys/types.h> #include <sys/mman.h> #include <unistd.h> #include <sys/syscall.h> #include <asm/ldt.h> int modify_ldt(int func, void *ptr, unsigned long bytecount) { return syscall(SYS_modify_ldt, func, ptr, bytecount); } /* this is assumed to be usable */ #define SEGBASEADDR 0x10000 #define SEGLIMIT 0x20000 /* 16-bit segment */ struct user_desc desc = { .entry_number = 0, .base_addr = SEGBASEADDR, .limit = SEGLIMIT, .seg_32bit = 0, .contents = 0, /* ??? */ .read_exec_only = 0, .limit_in_pages = 0, .seg_not_present = 0, .useable = 1 }; int main(void) { setvbuf(stdout, NULL, _IONBF, 0); /* map a 64 kb segment */ char *pointer = mmap((void *)SEGBASEADDR, SEGLIMIT+1, PROT_EXEC|PROT_READ|PROT_WRITE, MAP_SHARED|MAP_ANONYMOUS, -1, 0); if (pointer == NULL) { printf("could not map space\n"); return 0; } /* write ldt, new mode */ int err = modify_ldt(0x11, &desc, sizeof(desc)); if (err) { printf("error modifying ldt: %i\n", err); return 0; } for (int i=0; i<1000; i++) { asm volatile ( "pusha\n\t" "mov %ss, %eax\n\t" /* preserve ss:esp */ "mov %esp, %ebp\n\t" "push $7\n\t" /* index 0, ldt, user mode */ "push $65536-4096\n\t" /* esp */ "lss (%esp), %esp\n\t" /* switch to new stack */ "push %eax\n\t" /* save old ss:esp on new stack */ "push %ebp\n\t" "add $17*65536, %esp\n\t" /* set high bits */ "mov %esp, %edx\n\t" "mov $10000000, %ecx\n\t" /* wait... */ "1: loop 1b\n\t" /* ... a bit */ "cmp %esp, %edx\n\t" "je 1f\n\t" "ud2\n\t" /* esp changed inexplicably! */ "1:\n\t" "sub $17*65536, %esp\n\t" /* restore high bits */ "lss (%esp), %esp\n\t" /* restore old ss:esp */ "popa\n\t"); printf("\rx%ix", i); } return 0; } Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Acked-by: Stas Sergeev <stsp@aknet.ru> Signed-off-by: H. Peter Anvin <hpa@zytor.com> --- arch/x86/kernel/entry_32.S | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S index c929add..d7d1c7d 100644 --- a/arch/x86/kernel/entry_32.S +++ b/arch/x86/kernel/entry_32.S @@ -84,7 +84,7 @@ #define preempt_stop(clobbers) DISABLE_INTERRUPTS(clobbers); TRACE_IRQS_OFF #else #define preempt_stop(clobbers) -#define resume_kernel restore_nocheck +#define resume_kernel restore_all #endif .macro TRACE_IRQS_IRET @@ -372,7 +372,7 @@ END(ret_from_exception) ENTRY(resume_kernel) DISABLE_INTERRUPTS(CLBR_ANY) cmpl $0,TI_preempt_count(%ebp) # non-zero preempt_count ? - jnz restore_nocheck + jnz restore_all need_resched: movl TI_flags(%ebp), %ecx # need_resched set ? testb $_TIF_NEED_RESCHED, %cl @@ -540,6 +540,8 @@ syscall_exit: jne syscall_exit_work restore_all: + TRACE_IRQS_IRET +restore_all_notrace: movl PT_EFLAGS(%esp), %eax # mix EFLAGS, SS and CS # Warning: PT_OLDSS(%esp) contains the wrong/random values if we # are returning to the kernel. @@ -551,8 +553,6 @@ restore_all: CFI_REMEMBER_STATE je ldt_ss # returning to user-space with LDT SS restore_nocheck: - TRACE_IRQS_IRET -restore_nocheck_notrace: RESTORE_REGS 4 # skip orig_eax/error_code CFI_ADJUST_CFA_OFFSET -4 irq_return: @@ -601,8 +601,10 @@ ldt_ss: CFI_ADJUST_CFA_OFFSET 4 pushl %eax CFI_ADJUST_CFA_OFFSET 4 + /* Disable interrupts, but do not irqtrace this section: we + * will soon execute iret and the tracer was already set to + * the irqstate after the iret */ DISABLE_INTERRUPTS(CLBR_EAX) - TRACE_IRQS_OFF lss (%esp), %esp CFI_ADJUST_CFA_OFFSET -8 jmp restore_nocheck @@ -1329,7 +1331,7 @@ nmi_stack_correct: xorl %edx,%edx # zero error code movl %esp,%eax # pt_regs pointer call do_nmi - jmp restore_nocheck_notrace + jmp restore_all_notrace CFI_ENDPROC nmi_stack_fixup: -- cgit v1.1 From dc4c2a0aed3b09f6e255bd5c3faa50fe6e0b2ded Mon Sep 17 00:00:00 2001 From: Alexander van Heukelum <heukelum@fastmail.fm> Date: Thu, 18 Jun 2009 00:35:58 +0200 Subject: i386: fix/simplify espfix stack switching, move it into assembly The espfix code triggers if we have a protected mode userspace application with a 16-bit stack. On returning to userspace, with iret, the CPU doesn't restore the high word of the stack pointer. This is an "official" bug, and the work-around used in the kernel is to temporarily switch to a 32-bit stack segment/pointer pair where the high word of the pointer is equal to the high word of the userspace stackpointer. The current implementation uses THREAD_SIZE to determine the cut-off, but there is no good reason not to use the more natural 64kb... However, implementing this by simply substituting THREAD_SIZE with 65536 in patch_espfix_desc crashed the test application. patch_espfix_desc tries to do what is described above, but gets it subtly wrong if the userspace stack pointer is just below a multiple of THREAD_SIZE: an overflow occurs to bit 13... With a bit of luck, when the kernelspace stackpointer is just below a 64kb-boundary, the overflow then ripples trough to bit 16 and userspace will see its stack pointer changed by 65536. This patch moves all espfix code into entry_32.S. Selecting a 16-bit cut-off simplifies the code. The game with changing the limit dynamically is removed too. It complicates matters and I see no value in it. Changing only the top 16-bit word of ESP is one instruction and it also implies that only two bytes of the ESPFIX GDT entry need to be changed and this can be implemented in just a handful simple to understand instructions. As a side effect, the operation to compute the original ESP from the ESPFIX ESP and the GDT entry simplifies a bit too, and the remaining three instructions have been expanded inline in entry_32.S. impact: can now reliably run userspace with ESP=xxxxfffc on 16-bit stack segment Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Acked-by: Stas Sergeev <stsp@aknet.ru> Signed-off-by: H. Peter Anvin <hpa@zytor.com> --- arch/x86/kernel/cpu/common.c | 2 +- arch/x86/kernel/entry_32.S | 49 ++++++++++++++++++++++++++++++-------------- 2 files changed, 35 insertions(+), 16 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index 5b9cb88..ba1131a 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -108,7 +108,7 @@ DEFINE_PER_CPU_PAGE_ALIGNED(struct gdt_page, gdt_page) = { .gdt = { /* data */ [GDT_ENTRY_APMBIOS_BASE+2] = { { { 0x0000ffff, 0x00409200 } } }, - [GDT_ENTRY_ESPFIX_SS] = { { { 0x00000000, 0x00c09200 } } }, + [GDT_ENTRY_ESPFIX_SS] = { { { 0x0000ffff, 0x00cf9200 } } }, [GDT_ENTRY_PERCPU] = { { { 0x0000ffff, 0x00cf9200 } } }, GDT_STACK_CANARY_INIT #endif diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S index d7d1c7d..848f73f 100644 --- a/arch/x86/kernel/entry_32.S +++ b/arch/x86/kernel/entry_32.S @@ -588,24 +588,34 @@ ldt_ss: jne restore_nocheck #endif - /* If returning to userspace with 16bit stack, - * try to fix the higher word of ESP, as the CPU - * won't restore it. - * This is an "official" bug of all the x86-compatible - * CPUs, which we can try to work around to make - * dosemu and wine happy. */ - movl PT_OLDESP(%esp), %eax - movl %esp, %edx - call patch_espfix_desc +/* + * Setup and switch to ESPFIX stack + * + * We're returning to userspace with a 16 bit stack. The CPU will not + * restore the high word of ESP for us on executing iret... This is an + * "official" bug of all the x86-compatible CPUs, which we can work + * around to make dosemu and wine happy. We do this by preloading the + * high word of ESP with the high word of the userspace ESP while + * compensating for the offset by changing to the ESPFIX segment with + * a base address that matches for the difference. + */ + mov %esp, %edx /* load kernel esp */ + mov PT_OLDESP(%esp), %eax /* load userspace esp */ + mov %dx, %ax /* eax: new kernel esp */ + sub %eax, %edx /* offset (low word is 0) */ + PER_CPU(gdt_page, %ebx) + shr $16, %edx + mov %dl, GDT_ENTRY_ESPFIX_SS * 8 + 4(%ebx) /* bits 16..23 */ + mov %dh, GDT_ENTRY_ESPFIX_SS * 8 + 7(%ebx) /* bits 24..31 */ pushl $__ESPFIX_SS CFI_ADJUST_CFA_OFFSET 4 - pushl %eax + push %eax /* new kernel esp */ CFI_ADJUST_CFA_OFFSET 4 /* Disable interrupts, but do not irqtrace this section: we * will soon execute iret and the tracer was already set to * the irqstate after the iret */ DISABLE_INTERRUPTS(CLBR_EAX) - lss (%esp), %esp + lss (%esp), %esp /* switch to espfix segment */ CFI_ADJUST_CFA_OFFSET -8 jmp restore_nocheck CFI_ENDPROC @@ -718,15 +728,24 @@ PTREGSCALL(vm86) PTREGSCALL(vm86old) .macro FIXUP_ESPFIX_STACK - /* since we are on a wrong stack, we cant make it a C code :( */ +/* + * Switch back for ESPFIX stack to the normal zerobased stack + * + * We can't call C functions using the ESPFIX stack. This code reads + * the high word of the segment base from the GDT and swiches to the + * normal stack and adjusts ESP with the matching offset. + */ + /* fixup the stack */ PER_CPU(gdt_page, %ebx) - GET_DESC_BASE(GDT_ENTRY_ESPFIX_SS, %ebx, %eax, %ax, %al, %ah) - addl %esp, %eax + mov GDT_ENTRY_ESPFIX_SS * 8 + 4(%ebx), %al /* bits 16..23 */ + mov GDT_ENTRY_ESPFIX_SS * 8 + 7(%ebx), %ah /* bits 24..31 */ + shl $16, %eax + addl %esp, %eax /* the adjusted stack pointer */ pushl $__KERNEL_DS CFI_ADJUST_CFA_OFFSET 4 pushl %eax CFI_ADJUST_CFA_OFFSET 4 - lss (%esp), %esp + lss (%esp), %esp /* switch to the normal stack segment */ CFI_ADJUST_CFA_OFFSET -8 .endm .macro UNWIND_ESPFIX_STACK -- cgit v1.1 From bc3f5d3dbd576da94a575b1477b8e38551bf11da Mon Sep 17 00:00:00 2001 From: Alexander van Heukelum <heukelum@fastmail.fm> Date: Thu, 18 Jun 2009 00:35:59 +0200 Subject: x86: de-assembler-ize asm/desc.h asm/desc.h is included in three assembly files, but the only macro it defines, GET_DESC_BASE, is never used. This patch removes the includes, removes the macro GET_DESC_BASE and the ASSEMBLY guard from asm/desc.h. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: H. Peter Anvin <hpa@zytor.com> --- arch/x86/include/asm/desc.h | 26 -------------------------- arch/x86/kernel/entry_32.S | 1 - arch/x86/kernel/head_32.S | 1 - arch/x86/kernel/head_64.S | 1 - 4 files changed, 29 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/desc.h b/arch/x86/include/asm/desc.h index c45f415..c993e9e 100644 --- a/arch/x86/include/asm/desc.h +++ b/arch/x86/include/asm/desc.h @@ -1,7 +1,6 @@ #ifndef _ASM_X86_DESC_H #define _ASM_X86_DESC_H -#ifndef __ASSEMBLY__ #include <asm/desc_defs.h> #include <asm/ldt.h> #include <asm/mmu.h> @@ -380,29 +379,4 @@ static inline void set_system_intr_gate_ist(int n, void *addr, unsigned ist) _set_gate(n, GATE_INTERRUPT, addr, 0x3, ist, __KERNEL_CS); } -#else -/* - * GET_DESC_BASE reads the descriptor base of the specified segment. - * - * Args: - * idx - descriptor index - * gdt - GDT pointer - * base - 32bit register to which the base will be written - * lo_w - lo word of the "base" register - * lo_b - lo byte of the "base" register - * hi_b - hi byte of the low word of the "base" register - * - * Example: - * GET_DESC_BASE(GDT_ENTRY_ESPFIX_SS, %ebx, %eax, %ax, %al, %ah) - * Will read the base address of GDT_ENTRY_ESPFIX_SS and put it into %eax. - */ -#define GET_DESC_BASE(idx, gdt, base, lo_w, lo_b, hi_b) \ - movb idx * 8 + 4(gdt), lo_b; \ - movb idx * 8 + 7(gdt), hi_b; \ - shll $16, base; \ - movw idx * 8 + 2(gdt), lo_w; - - -#endif /* __ASSEMBLY__ */ - #endif /* _ASM_X86_DESC_H */ diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S index 848f73f..9f8ce77 100644 --- a/arch/x86/kernel/entry_32.S +++ b/arch/x86/kernel/entry_32.S @@ -48,7 +48,6 @@ #include <asm/segment.h> #include <asm/smp.h> #include <asm/page_types.h> -#include <asm/desc.h> #include <asm/percpu.h> #include <asm/dwarf2.h> #include <asm/processor-flags.h> diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S index dc5ed4b..8663afb 100644 --- a/arch/x86/kernel/head_32.S +++ b/arch/x86/kernel/head_32.S @@ -13,7 +13,6 @@ #include <asm/segment.h> #include <asm/page_types.h> #include <asm/pgtable_types.h> -#include <asm/desc.h> #include <asm/cache.h> #include <asm/thread_info.h> #include <asm/asm-offsets.h> diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S index 54b29bb..fa54f78 100644 --- a/arch/x86/kernel/head_64.S +++ b/arch/x86/kernel/head_64.S @@ -12,7 +12,6 @@ #include <linux/linkage.h> #include <linux/threads.h> #include <linux/init.h> -#include <asm/desc.h> #include <asm/segment.h> #include <asm/pgtable.h> #include <asm/page.h> -- cgit v1.1 From 4505ffda54b352a08eb08ebad62ac48725c41966 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig <hch@lst.de> Date: Thu, 18 Jun 2009 13:38:26 +0900 Subject: sh: remove stray markers. arch/sh has a couple of stray markers without any users introduced in commit 3d58695edbfac785161bf282dc11fd42a483d6c9. Remove them in preparation of removing the markers in favour of the TRACE_EVENT macro (and also because we don't keep dead code around). Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/kernel/process_32.c | 2 -- arch/sh/kernel/process_64.c | 7 +------ arch/sh/kernel/sys_sh.c | 2 -- arch/sh/mm/fault_32.c | 4 ---- 4 files changed, 1 insertion(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/sh/kernel/process_32.c b/arch/sh/kernel/process_32.c index 9289ede..eea4cf9 100644 --- a/arch/sh/kernel/process_32.c +++ b/arch/sh/kernel/process_32.c @@ -119,8 +119,6 @@ int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags) pid = do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, ®s, 0, NULL, NULL); - trace_mark(kernel_arch_kthread_create, "pid %d fn %p", pid, fn); - return pid; } diff --git a/arch/sh/kernel/process_64.c b/arch/sh/kernel/process_64.c index 96be839..44c8077 100644 --- a/arch/sh/kernel/process_64.c +++ b/arch/sh/kernel/process_64.c @@ -323,7 +323,6 @@ ATTRIB_NORET void kernel_thread_helper(void *arg, int (*fn)(void *)) int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags) { struct pt_regs regs; - int pid; memset(®s, 0, sizeof(regs)); regs.regs[2] = (unsigned long)arg; @@ -333,12 +332,8 @@ int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags) regs.sr = (1 << 30); /* Ok, create the new process.. */ - pid = do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, + return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, ®s, 0, NULL, NULL); - - trace_mark(kernel_arch_kthread_create, "pid %d fn %p", pid, fn); - - return pid; } /* diff --git a/arch/sh/kernel/sys_sh.c b/arch/sh/kernel/sys_sh.c index e3a7e36..90d00e4 100644 --- a/arch/sh/kernel/sys_sh.c +++ b/arch/sh/kernel/sys_sh.c @@ -88,8 +88,6 @@ asmlinkage int sys_ipc(uint call, int first, int second, version = call >> 16; /* hack for backward compatibility */ call &= 0xffff; - trace_mark(kernel_arch_ipc_call, "call %u first %d", call, first); - if (call <= SEMTIMEDOP) switch (call) { case SEMOP: diff --git a/arch/sh/mm/fault_32.c b/arch/sh/mm/fault_32.c index 31a33eb..2c50f80 100644 --- a/arch/sh/mm/fault_32.c +++ b/arch/sh/mm/fault_32.c @@ -249,9 +249,6 @@ static inline int notify_page_fault(struct pt_regs *regs, int trap) { int ret = 0; - trace_mark(kernel_arch_trap_entry, "trap_id %d ip #p%ld", - trap >> 5, instruction_pointer(regs)); - #ifdef CONFIG_KPROBES if (!user_mode(regs)) { preempt_disable(); @@ -327,6 +324,5 @@ asmlinkage int __kprobes __do_page_fault(struct pt_regs *regs, ret = 0; out: - trace_mark(kernel_arch_trap_exit, MARK_NOARGS); return ret; } -- cgit v1.1 From 74b602c7147212a7495879ec23fe6c2d3b470e06 Mon Sep 17 00:00:00 2001 From: Yinghai Lu <yinghai@kernel.org> Date: Wed, 17 Jun 2009 14:43:32 -0700 Subject: x86: fix duplicated sysfs attribute The sysfs attribute cmci_disabled was accidentall turned into a duplicate of ignore_ce, breaking all other attributes. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> --- arch/x86/kernel/cpu/mcheck/mce.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index 2a560ce..5aac9e4 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -1777,7 +1777,7 @@ static struct sysdev_ext_attribute attr_ignore_ce = { }; static struct sysdev_ext_attribute attr_cmci_disabled = { - _SYSDEV_ATTR(ignore_ce, 0644, sysdev_show_int, set_cmci_disabled), + _SYSDEV_ATTR(cmci_disabled, 0644, sysdev_show_int, set_cmci_disabled), &mce_cmci_disabled }; -- cgit v1.1 From e92fae064ae42b2a4a77646f7655bca4c87bb1eb Mon Sep 17 00:00:00 2001 From: Yinghai Lu <yinghai@kernel.org> Date: Wed, 17 Jun 2009 16:21:33 -0700 Subject: x86: use zalloc_cpumask_var for mce_dev_initialized We need a cleared cpu_mask to record if mce is initialized, especially when MAXSMP is used. used zalloc_... instead Signed-off-by: Yinghai Lu <yinghai@kernel.org> Reviewed-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Cc: stable@kernel.org Signed-off-by: H. Peter Anvin <hpa@zytor.com> --- arch/x86/kernel/cpu/mcheck/mce.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index 5aac9e4..c2fb70d 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -1969,7 +1969,7 @@ static __init int mce_init_device(void) if (!mce_available(&boot_cpu_data)) return -EIO; - alloc_cpumask_var(&mce_dev_initialized, GFP_KERNEL); + zalloc_cpumask_var(&mce_dev_initialized, GFP_KERNEL); err = mce_init_banks(); if (err) -- cgit v1.1 From 99d921c2ff28c6396c5fa9a5360b3005bc6abba7 Mon Sep 17 00:00:00 2001 From: Paul Mundt <lethal@linux-sh.org> Date: Thu, 18 Jun 2009 16:09:38 +0900 Subject: sh: Enable soc-camera in ap325rxa/migor/se7724 defconfigs. The MEDIA_SUPPORT option disabled soc-camera support, so re-enable it for the impacted defconfigs. Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/configs/ap325rxa_defconfig | 51 ++++++++++++++++++++- arch/sh/configs/migor_defconfig | 51 ++++++++++++++++++++- arch/sh/configs/se7724_defconfig | 94 +++++++++++++++++++++++++++++++++++++- 3 files changed, 190 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/sh/configs/ap325rxa_defconfig b/arch/sh/configs/ap325rxa_defconfig index 929edf7..6c38a43 100644 --- a/arch/sh/configs/ap325rxa_defconfig +++ b/arch/sh/configs/ap325rxa_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.30 -# Thu Jun 18 12:20:40 2009 +# Thu Jun 18 16:04:11 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -831,7 +831,54 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set -# CONFIG_MEDIA_SUPPORT is not set +CONFIG_MEDIA_SUPPORT=y + +# +# Multimedia core support +# +CONFIG_VIDEO_DEV=y +CONFIG_VIDEO_V4L2_COMMON=y +# CONFIG_VIDEO_ALLOW_V4L1 is not set +CONFIG_VIDEO_V4L1_COMPAT=y +# CONFIG_DVB_CORE is not set +CONFIG_VIDEO_MEDIA=y + +# +# Multimedia drivers +# +# CONFIG_MEDIA_ATTACH is not set +CONFIG_MEDIA_TUNER=y +# CONFIG_MEDIA_TUNER_CUSTOMISE is not set +CONFIG_MEDIA_TUNER_SIMPLE=y +CONFIG_MEDIA_TUNER_TDA8290=y +CONFIG_MEDIA_TUNER_TDA9887=y +CONFIG_MEDIA_TUNER_TEA5761=y +CONFIG_MEDIA_TUNER_TEA5767=y +CONFIG_MEDIA_TUNER_MT20XX=y +CONFIG_MEDIA_TUNER_XC2028=y +CONFIG_MEDIA_TUNER_XC5000=y +CONFIG_MEDIA_TUNER_MC44S803=y +CONFIG_VIDEO_V4L2=y +CONFIG_VIDEOBUF_GEN=y +CONFIG_VIDEOBUF_DMA_CONTIG=y +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +CONFIG_SOC_CAMERA=y +# CONFIG_SOC_CAMERA_MT9M001 is not set +# CONFIG_SOC_CAMERA_MT9M111 is not set +# CONFIG_SOC_CAMERA_MT9T031 is not set +# CONFIG_SOC_CAMERA_MT9V022 is not set +# CONFIG_SOC_CAMERA_TW9910 is not set +CONFIG_SOC_CAMERA_PLATFORM=y +CONFIG_SOC_CAMERA_OV772X=y +CONFIG_VIDEO_SH_MOBILE_CEU=y +# CONFIG_RADIO_ADAPTERS is not set +# CONFIG_DAB is not set # # Graphics support diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig index 0596c2b..da627d2 100644 --- a/arch/sh/configs/migor_defconfig +++ b/arch/sh/configs/migor_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.30 -# Thu Jun 18 12:32:45 2009 +# Thu Jun 18 16:06:48 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -804,7 +804,54 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set -# CONFIG_MEDIA_SUPPORT is not set +CONFIG_MEDIA_SUPPORT=y + +# +# Multimedia core support +# +CONFIG_VIDEO_DEV=y +CONFIG_VIDEO_V4L2_COMMON=y +# CONFIG_VIDEO_ALLOW_V4L1 is not set +CONFIG_VIDEO_V4L1_COMPAT=y +# CONFIG_DVB_CORE is not set +CONFIG_VIDEO_MEDIA=y + +# +# Multimedia drivers +# +# CONFIG_MEDIA_ATTACH is not set +CONFIG_MEDIA_TUNER=y +# CONFIG_MEDIA_TUNER_CUSTOMISE is not set +CONFIG_MEDIA_TUNER_SIMPLE=y +CONFIG_MEDIA_TUNER_TDA8290=y +CONFIG_MEDIA_TUNER_TDA9887=y +CONFIG_MEDIA_TUNER_TEA5761=y +CONFIG_MEDIA_TUNER_TEA5767=y +CONFIG_MEDIA_TUNER_MT20XX=y +CONFIG_MEDIA_TUNER_XC2028=y +CONFIG_MEDIA_TUNER_XC5000=y +CONFIG_MEDIA_TUNER_MC44S803=y +CONFIG_VIDEO_V4L2=y +CONFIG_VIDEOBUF_GEN=y +CONFIG_VIDEOBUF_DMA_CONTIG=y +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +CONFIG_SOC_CAMERA=y +# CONFIG_SOC_CAMERA_MT9M001 is not set +# CONFIG_SOC_CAMERA_MT9M111 is not set +# CONFIG_SOC_CAMERA_MT9T031 is not set +# CONFIG_SOC_CAMERA_MT9V022 is not set +CONFIG_SOC_CAMERA_TW9910=y +# CONFIG_SOC_CAMERA_PLATFORM is not set +CONFIG_SOC_CAMERA_OV772X=y +CONFIG_VIDEO_SH_MOBILE_CEU=y +# CONFIG_RADIO_ADAPTERS is not set +# CONFIG_DAB is not set # # Graphics support diff --git a/arch/sh/configs/se7724_defconfig b/arch/sh/configs/se7724_defconfig index c5f005f..3840270 100644 --- a/arch/sh/configs/se7724_defconfig +++ b/arch/sh/configs/se7724_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.30 -# Thu Jun 18 12:56:56 2009 +# Thu Jun 18 16:09:05 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -852,7 +852,97 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set -# CONFIG_MEDIA_SUPPORT is not set +CONFIG_MEDIA_SUPPORT=y + +# +# Multimedia core support +# +CONFIG_VIDEO_DEV=y +CONFIG_VIDEO_V4L2_COMMON=y +# CONFIG_VIDEO_ALLOW_V4L1 is not set +CONFIG_VIDEO_V4L1_COMPAT=y +# CONFIG_DVB_CORE is not set +CONFIG_VIDEO_MEDIA=y + +# +# Multimedia drivers +# +# CONFIG_MEDIA_ATTACH is not set +CONFIG_MEDIA_TUNER=y +# CONFIG_MEDIA_TUNER_CUSTOMISE is not set +CONFIG_MEDIA_TUNER_SIMPLE=y +CONFIG_MEDIA_TUNER_TDA8290=y +CONFIG_MEDIA_TUNER_TDA9887=y +CONFIG_MEDIA_TUNER_TEA5761=y +CONFIG_MEDIA_TUNER_TEA5767=y +CONFIG_MEDIA_TUNER_MT20XX=y +CONFIG_MEDIA_TUNER_XC2028=y +CONFIG_MEDIA_TUNER_XC5000=y +CONFIG_MEDIA_TUNER_MC44S803=y +CONFIG_VIDEO_V4L2=y +CONFIG_VIDEOBUF_GEN=y +CONFIG_VIDEOBUF_DMA_CONTIG=y +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +CONFIG_SOC_CAMERA=y +# CONFIG_SOC_CAMERA_MT9M001 is not set +# CONFIG_SOC_CAMERA_MT9M111 is not set +# CONFIG_SOC_CAMERA_MT9T031 is not set +# CONFIG_SOC_CAMERA_MT9V022 is not set +# CONFIG_SOC_CAMERA_TW9910 is not set +# CONFIG_SOC_CAMERA_PLATFORM is not set +CONFIG_SOC_CAMERA_OV772X=y +CONFIG_VIDEO_SH_MOBILE_CEU=y +CONFIG_V4L_USB_DRIVERS=y +# CONFIG_USB_VIDEO_CLASS is not set +CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y +CONFIG_USB_GSPCA=m +# CONFIG_USB_M5602 is not set +# CONFIG_USB_STV06XX is not set +# CONFIG_USB_GSPCA_CONEX is not set +# CONFIG_USB_GSPCA_ETOMS is not set +# CONFIG_USB_GSPCA_FINEPIX is not set +# CONFIG_USB_GSPCA_MARS is not set +# CONFIG_USB_GSPCA_MR97310A is not set +# CONFIG_USB_GSPCA_OV519 is not set +# CONFIG_USB_GSPCA_OV534 is not set +# CONFIG_USB_GSPCA_PAC207 is not set +# CONFIG_USB_GSPCA_PAC7311 is not set +# CONFIG_USB_GSPCA_SONIXB is not set +# CONFIG_USB_GSPCA_SONIXJ is not set +# CONFIG_USB_GSPCA_SPCA500 is not set +# CONFIG_USB_GSPCA_SPCA501 is not set +# CONFIG_USB_GSPCA_SPCA505 is not set +# CONFIG_USB_GSPCA_SPCA506 is not set +# CONFIG_USB_GSPCA_SPCA508 is not set +# CONFIG_USB_GSPCA_SPCA561 is not set +# CONFIG_USB_GSPCA_SQ905 is not set +# CONFIG_USB_GSPCA_SQ905C is not set +# CONFIG_USB_GSPCA_STK014 is not set +# CONFIG_USB_GSPCA_SUNPLUS is not set +# CONFIG_USB_GSPCA_T613 is not set +# CONFIG_USB_GSPCA_TV8532 is not set +# CONFIG_USB_GSPCA_VC032X is not set +# CONFIG_USB_GSPCA_ZC3XX is not set +# CONFIG_VIDEO_PVRUSB2 is not set +# CONFIG_VIDEO_HDPVR is not set +# CONFIG_VIDEO_EM28XX is not set +# CONFIG_VIDEO_CX231XX is not set +# CONFIG_VIDEO_USBVISION is not set +# CONFIG_USB_ET61X251 is not set +# CONFIG_USB_SN9C102 is not set +# CONFIG_USB_ZC0301 is not set +CONFIG_USB_PWC_INPUT_EVDEV=y +# CONFIG_USB_ZR364XX is not set +# CONFIG_USB_STKWEBCAM is not set +# CONFIG_USB_S2255 is not set +# CONFIG_RADIO_ADAPTERS is not set +# CONFIG_DAB is not set # # Graphics support -- cgit v1.1 From 105988c015943e77092a6568bc5fb7e386df6ccd Mon Sep 17 00:00:00 2001 From: Paul Mackerras <paulus@samba.org> Date: Wed, 17 Jun 2009 21:50:04 +1000 Subject: perf_counter: powerpc: Enable use of software counters on 32-bit powerpc This enables the perf_counter subsystem on 32-bit powerpc. Since we don't have any support for hardware counters on 32-bit powerpc yet, only software counters can be used. Besides selecting HAVE_PERF_COUNTERS for 32-bit powerpc as well as 64-bit, the main thing this does is add an implementation of set_perf_counter_pending(). This needs to arrange for perf_counter_do_pending() to be called when interrupts are enabled. Rather than add code to local_irq_restore as 64-bit does, the 32-bit set_perf_counter_pending() generates an interrupt by setting the decrementer to 1 so that a decrementer interrupt will become pending in 1 or 2 timebase ticks (if a decrementer interrupt isn't already pending). When interrupts are enabled, timer_interrupt() will be called, and some new code in there calls perf_counter_do_pending(). We use a per-cpu array of flags to indicate whether we need to call perf_counter_do_pending() or not. This introduces a couple of new Kconfig symbols: PPC_HAVE_PMU_SUPPORT, which is selected by processor families for which we have hardware PMU support (currently only PPC64), and PPC_PERF_CTRS, which enables the powerpc-specific perf_counter back-end. Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: linuxppc-dev@ozlabs.org Cc: benh@kernel.crashing.org LKML-Reference: <19000.55404.103840.393470@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/powerpc/Kconfig | 1 + arch/powerpc/include/asm/hw_irq.h | 5 ++++- arch/powerpc/include/asm/perf_counter.h | 10 ++++++++-- arch/powerpc/kernel/Makefile | 6 +++--- arch/powerpc/kernel/time.c | 25 +++++++++++++++++++++++++ arch/powerpc/platforms/Kconfig.cputype | 11 ++++++++++- 6 files changed, 51 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 9fb344d..bf6cedf 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -126,6 +126,7 @@ config PPC select HAVE_OPROFILE select HAVE_SYSCALL_WRAPPERS if PPC64 select GENERIC_ATOMIC64 if PPC32 + select HAVE_PERF_COUNTERS config EARLY_PRINTK bool diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h index 10a642d..867ab8e 100644 --- a/arch/powerpc/include/asm/hw_irq.h +++ b/arch/powerpc/include/asm/hw_irq.h @@ -131,6 +131,8 @@ static inline int irqs_disabled_flags(unsigned long flags) struct irq_chip; #ifdef CONFIG_PERF_COUNTERS + +#ifdef CONFIG_PPC64 static inline unsigned long test_perf_counter_pending(void) { unsigned long x; @@ -154,8 +156,9 @@ static inline void clear_perf_counter_pending(void) "r" (0), "i" (offsetof(struct paca_struct, perf_counter_pending))); } +#endif /* CONFIG_PPC64 */ -#else +#else /* CONFIG_PERF_COUNTERS */ static inline unsigned long test_perf_counter_pending(void) { diff --git a/arch/powerpc/include/asm/perf_counter.h b/arch/powerpc/include/asm/perf_counter.h index b398a84..2c2d9f6 100644 --- a/arch/powerpc/include/asm/perf_counter.h +++ b/arch/powerpc/include/asm/perf_counter.h @@ -57,11 +57,17 @@ extern struct power_pmu *ppmu; struct pt_regs; extern unsigned long perf_misc_flags(struct pt_regs *regs); -#define perf_misc_flags(regs) perf_misc_flags(regs) - extern unsigned long perf_instruction_pointer(struct pt_regs *regs); /* + * Only override the default definitions in include/linux/perf_counter.h + * if we have hardware PMU support. + */ +#ifdef CONFIG_PPC_PERF_CTRS +#define perf_misc_flags(regs) perf_misc_flags(regs) +#endif + +/* * The power_pmu.get_constraint function returns a 64-bit value and * a 64-bit mask that express the constraints between this event and * other events. diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 612b0c4..c5f93f0 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -95,9 +95,9 @@ obj64-$(CONFIG_AUDIT) += compat_audit.o obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o -obj-$(CONFIG_PERF_COUNTERS) += perf_counter.o power4-pmu.o ppc970-pmu.o \ - power5-pmu.o power5+-pmu.o power6-pmu.o \ - power7-pmu.o +obj-$(CONFIG_PPC_PERF_CTRS) += perf_counter.o +obj64-$(CONFIG_PPC_PERF_CTRS) += power4-pmu.o ppc970-pmu.o power5-pmu.o \ + power5+-pmu.o power6-pmu.o power7-pmu.o obj-$(CONFIG_8XX_MINIMAL_FPEMU) += softemu8xx.o diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 15391c2..eae4511 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -53,6 +53,7 @@ #include <linux/posix-timers.h> #include <linux/irq.h> #include <linux/delay.h> +#include <linux/perf_counter.h> #include <asm/io.h> #include <asm/processor.h> @@ -525,6 +526,26 @@ void __init iSeries_time_init_early(void) } #endif /* CONFIG_PPC_ISERIES */ +#if defined(CONFIG_PERF_COUNTERS) && defined(CONFIG_PPC32) +DEFINE_PER_CPU(u8, perf_counter_pending); + +void set_perf_counter_pending(void) +{ + get_cpu_var(perf_counter_pending) = 1; + set_dec(1); + put_cpu_var(perf_counter_pending); +} + +#define test_perf_counter_pending() __get_cpu_var(perf_counter_pending) +#define clear_perf_counter_pending() __get_cpu_var(perf_counter_pending) = 0 + +#else /* CONFIG_PERF_COUNTERS && CONFIG_PPC32 */ + +#define test_perf_counter_pending() 0 +#define clear_perf_counter_pending() + +#endif /* CONFIG_PERF_COUNTERS && CONFIG_PPC32 */ + /* * For iSeries shared processors, we have to let the hypervisor * set the hardware decrementer. We set a virtual decrementer @@ -551,6 +572,10 @@ void timer_interrupt(struct pt_regs * regs) set_dec(DECREMENTER_MAX); #ifdef CONFIG_PPC32 + if (test_perf_counter_pending()) { + clear_perf_counter_pending(); + perf_counter_do_pending(); + } if (atomic_read(&ppc_n_lost_interrupts) != 0) do_IRQ(regs); #endif diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype index cca6b4f..dd9f3ec 100644 --- a/arch/powerpc/platforms/Kconfig.cputype +++ b/arch/powerpc/platforms/Kconfig.cputype @@ -1,7 +1,7 @@ config PPC64 bool "64-bit kernel" default n - select HAVE_PERF_COUNTERS + select PPC_HAVE_PMU_SUPPORT help This option selects whether a 32-bit or a 64-bit kernel will be built. @@ -243,6 +243,15 @@ config VIRT_CPU_ACCOUNTING If in doubt, say Y here. +config PPC_HAVE_PMU_SUPPORT + bool + +config PPC_PERF_CTRS + def_bool y + depends on PERF_COUNTERS && PPC_HAVE_PMU_SUPPORT + help + This enables the powerpc-specific perf_counter back-end. + config SMP depends on PPC_STD_MMU || FSL_BOOKE bool "Symmetric multi-processing support" -- cgit v1.1 From 448d64f8f4c147db466c549550767cc515a4d34c Mon Sep 17 00:00:00 2001 From: Paul Mackerras <paulus@samba.org> Date: Wed, 17 Jun 2009 21:51:13 +1000 Subject: perf_counter: powerpc: Use unsigned long for register and constraint values This changes the powerpc perf_counter back-end to use unsigned long types for hardware register values and for the value/mask pairs used in checking whether a given set of events fit within the hardware constraints. This is in preparation for adding support for the PMU on some 32-bit powerpc processors. On 32-bit processors the hardware registers are only 32 bits wide, and the PMU structure is generally simpler, so 32 bits should be ample for expressing the hardware constraints. On 64-bit processors, unsigned long is 64 bits wide, so using unsigned long vs. u64 (unsigned long long) makes no actual difference. This makes some other very minor changes: adjusting whitespace to line things up in initialized structures, and simplifying some code in hw_perf_disable(). Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: linuxppc-dev@ozlabs.org Cc: benh@kernel.crashing.org LKML-Reference: <19000.55473.26174.331511@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/powerpc/include/asm/perf_counter.h | 35 +++++++------- arch/powerpc/kernel/perf_counter.c | 20 ++++---- arch/powerpc/kernel/power4-pmu.c | 74 +++++++++++++++-------------- arch/powerpc/kernel/power5+-pmu.c | 79 ++++++++++++++++--------------- arch/powerpc/kernel/power5-pmu.c | 83 +++++++++++++++++---------------- arch/powerpc/kernel/power6-pmu.c | 57 +++++++++++----------- arch/powerpc/kernel/power7-pmu.c | 46 +++++++++--------- arch/powerpc/kernel/ppc970-pmu.c | 47 ++++++++++--------- 8 files changed, 229 insertions(+), 212 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/perf_counter.h b/arch/powerpc/include/asm/perf_counter.h index 2c2d9f6..2ceb0fe 100644 --- a/arch/powerpc/include/asm/perf_counter.h +++ b/arch/powerpc/include/asm/perf_counter.h @@ -21,21 +21,22 @@ * describe the PMU on a particular POWER-family CPU. */ struct power_pmu { - int n_counter; - int max_alternatives; - u64 add_fields; - u64 test_adder; - int (*compute_mmcr)(u64 events[], int n_ev, - unsigned int hwc[], u64 mmcr[]); - int (*get_constraint)(u64 event, u64 *mskp, u64 *valp); - int (*get_alternatives)(u64 event, unsigned int flags, - u64 alt[]); - void (*disable_pmc)(unsigned int pmc, u64 mmcr[]); - int (*limited_pmc_event)(u64 event); - u32 flags; - int n_generic; - int *generic_events; - int (*cache_events)[PERF_COUNT_HW_CACHE_MAX] + int n_counter; + int max_alternatives; + unsigned long add_fields; + unsigned long test_adder; + int (*compute_mmcr)(u64 events[], int n_ev, + unsigned int hwc[], unsigned long mmcr[]); + int (*get_constraint)(u64 event, unsigned long *mskp, + unsigned long *valp); + int (*get_alternatives)(u64 event, unsigned int flags, + u64 alt[]); + void (*disable_pmc)(unsigned int pmc, unsigned long mmcr[]); + int (*limited_pmc_event)(u64 event); + u32 flags; + int n_generic; + int *generic_events; + int (*cache_events)[PERF_COUNT_HW_CACHE_MAX] [PERF_COUNT_HW_CACHE_OP_MAX] [PERF_COUNT_HW_CACHE_RESULT_MAX]; }; @@ -68,8 +69,8 @@ extern unsigned long perf_instruction_pointer(struct pt_regs *regs); #endif /* - * The power_pmu.get_constraint function returns a 64-bit value and - * a 64-bit mask that express the constraints between this event and + * The power_pmu.get_constraint function returns a 32/64-bit value and + * a 32/64-bit mask that express the constraints between this event and * other events. * * The value and mask are divided up into (non-overlapping) bitfields diff --git a/arch/powerpc/kernel/perf_counter.c b/arch/powerpc/kernel/perf_counter.c index e6dc185..9300638 100644 --- a/arch/powerpc/kernel/perf_counter.c +++ b/arch/powerpc/kernel/perf_counter.c @@ -29,7 +29,7 @@ struct cpu_hw_counters { struct perf_counter *counter[MAX_HWCOUNTERS]; u64 events[MAX_HWCOUNTERS]; unsigned int flags[MAX_HWCOUNTERS]; - u64 mmcr[3]; + unsigned long mmcr[3]; struct perf_counter *limited_counter[MAX_LIMITED_HWCOUNTERS]; u8 limited_hwidx[MAX_LIMITED_HWCOUNTERS]; }; @@ -135,15 +135,15 @@ static void write_pmc(int idx, unsigned long val) static int power_check_constraints(u64 event[], unsigned int cflags[], int n_ev) { - u64 mask, value, nv; + unsigned long mask, value, nv; u64 alternatives[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES]; - u64 amasks[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES]; - u64 avalues[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES]; - u64 smasks[MAX_HWCOUNTERS], svalues[MAX_HWCOUNTERS]; + unsigned long amasks[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES]; + unsigned long avalues[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES]; + unsigned long smasks[MAX_HWCOUNTERS], svalues[MAX_HWCOUNTERS]; int n_alt[MAX_HWCOUNTERS], choice[MAX_HWCOUNTERS]; int i, j; - u64 addf = ppmu->add_fields; - u64 tadd = ppmu->test_adder; + unsigned long addf = ppmu->add_fields; + unsigned long tadd = ppmu->test_adder; if (n_ev > ppmu->n_counter) return -1; @@ -403,14 +403,12 @@ static void write_mmcr0(struct cpu_hw_counters *cpuhw, unsigned long mmcr0) void hw_perf_disable(void) { struct cpu_hw_counters *cpuhw; - unsigned long ret; unsigned long flags; local_irq_save(flags); cpuhw = &__get_cpu_var(cpu_hw_counters); - ret = cpuhw->disabled; - if (!ret) { + if (!cpuhw->disabled) { cpuhw->disabled = 1; cpuhw->n_added = 0; @@ -1013,9 +1011,9 @@ static void record_and_restart(struct perf_counter *counter, long val, struct pt_regs *regs, int nmi) { u64 period = counter->hw.sample_period; + unsigned long mmcra, sdsync; s64 prev, delta, left; int record = 0; - u64 mmcra, sdsync; /* we don't have to worry about interrupts here */ prev = atomic64_read(&counter->hw.prev_count); diff --git a/arch/powerpc/kernel/power4-pmu.c b/arch/powerpc/kernel/power4-pmu.c index 07bd308..81a1708 100644 --- a/arch/powerpc/kernel/power4-pmu.c +++ b/arch/powerpc/kernel/power4-pmu.c @@ -179,22 +179,22 @@ static short mmcr1_adder_bits[8] = { */ static struct unitinfo { - u64 value, mask; - int unit; - int lowerbit; + unsigned long value, mask; + int unit; + int lowerbit; } p4_unitinfo[16] = { - [PM_FPU] = { 0x44000000000000ull, 0x88000000000000ull, PM_FPU, 0 }, - [PM_ISU1] = { 0x20080000000000ull, 0x88000000000000ull, PM_ISU1, 0 }, + [PM_FPU] = { 0x44000000000000ul, 0x88000000000000ul, PM_FPU, 0 }, + [PM_ISU1] = { 0x20080000000000ul, 0x88000000000000ul, PM_ISU1, 0 }, [PM_ISU1_ALT] = - { 0x20080000000000ull, 0x88000000000000ull, PM_ISU1, 0 }, - [PM_IFU] = { 0x02200000000000ull, 0x08820000000000ull, PM_IFU, 41 }, + { 0x20080000000000ul, 0x88000000000000ul, PM_ISU1, 0 }, + [PM_IFU] = { 0x02200000000000ul, 0x08820000000000ul, PM_IFU, 41 }, [PM_IFU_ALT] = - { 0x02200000000000ull, 0x08820000000000ull, PM_IFU, 41 }, - [PM_IDU0] = { 0x10100000000000ull, 0x80840000000000ull, PM_IDU0, 1 }, - [PM_ISU2] = { 0x10140000000000ull, 0x80840000000000ull, PM_ISU2, 0 }, - [PM_LSU0] = { 0x01400000000000ull, 0x08800000000000ull, PM_LSU0, 0 }, - [PM_LSU1] = { 0x00000000000000ull, 0x00010000000000ull, PM_LSU1, 40 }, - [PM_GPS] = { 0x00000000000000ull, 0x00000000000000ull, PM_GPS, 0 } + { 0x02200000000000ul, 0x08820000000000ul, PM_IFU, 41 }, + [PM_IDU0] = { 0x10100000000000ul, 0x80840000000000ul, PM_IDU0, 1 }, + [PM_ISU2] = { 0x10140000000000ul, 0x80840000000000ul, PM_ISU2, 0 }, + [PM_LSU0] = { 0x01400000000000ul, 0x08800000000000ul, PM_LSU0, 0 }, + [PM_LSU1] = { 0x00000000000000ul, 0x00010000000000ul, PM_LSU1, 40 }, + [PM_GPS] = { 0x00000000000000ul, 0x00000000000000ul, PM_GPS, 0 } }; static unsigned char direct_marked_event[8] = { @@ -249,10 +249,11 @@ static int p4_marked_instr_event(u64 event) return (mask >> (byte * 8 + bit)) & 1; } -static int p4_get_constraint(u64 event, u64 *maskp, u64 *valp) +static int p4_get_constraint(u64 event, unsigned long *maskp, + unsigned long *valp) { int pmc, byte, unit, lower, sh; - u64 mask = 0, value = 0; + unsigned long mask = 0, value = 0; int grp = -1; pmc = (event >> PM_PMC_SH) & PM_PMC_MSK; @@ -282,14 +283,14 @@ static int p4_get_constraint(u64 event, u64 *maskp, u64 *valp) value |= p4_unitinfo[unit].value; sh = p4_unitinfo[unit].lowerbit; if (sh > 1) - value |= (u64)lower << sh; + value |= (unsigned long)lower << sh; else if (lower != sh) return -1; unit = p4_unitinfo[unit].unit; /* Set byte lane select field */ mask |= 0xfULL << (28 - 4 * byte); - value |= (u64)unit << (28 - 4 * byte); + value |= (unsigned long)unit << (28 - 4 * byte); } if (grp == 0) { /* increment PMC1/2/5/6 field */ @@ -353,9 +354,9 @@ static int p4_get_alternatives(u64 event, unsigned int flags, u64 alt[]) } static int p4_compute_mmcr(u64 event[], int n_ev, - unsigned int hwc[], u64 mmcr[]) + unsigned int hwc[], unsigned long mmcr[]) { - u64 mmcr0 = 0, mmcr1 = 0, mmcra = 0; + unsigned long mmcr0 = 0, mmcr1 = 0, mmcra = 0; unsigned int pmc, unit, byte, psel, lower; unsigned int ttm, grp; unsigned int pmc_inuse = 0; @@ -429,9 +430,11 @@ static int p4_compute_mmcr(u64 event[], int n_ev, return -1; /* Set TTMxSEL fields. Note, units 1-3 => TTM0SEL codes 0-2 */ - mmcr1 |= (u64)(unituse[3] * 2 + unituse[2]) << MMCR1_TTM0SEL_SH; - mmcr1 |= (u64)(unituse[7] * 3 + unituse[6] * 2) << MMCR1_TTM1SEL_SH; - mmcr1 |= (u64)unituse[9] << MMCR1_TTM2SEL_SH; + mmcr1 |= (unsigned long)(unituse[3] * 2 + unituse[2]) + << MMCR1_TTM0SEL_SH; + mmcr1 |= (unsigned long)(unituse[7] * 3 + unituse[6] * 2) + << MMCR1_TTM1SEL_SH; + mmcr1 |= (unsigned long)unituse[9] << MMCR1_TTM2SEL_SH; /* Set TTCxSEL fields. */ if (unitlower & 0xe) @@ -456,7 +459,8 @@ static int p4_compute_mmcr(u64 event[], int n_ev, ttm = unit - 1; /* 2->1, 3->2 */ else ttm = unit >> 2; - mmcr1 |= (u64)ttm << (MMCR1_TD_CP_DBG0SEL_SH - 2*byte); + mmcr1 |= (unsigned long)ttm + << (MMCR1_TD_CP_DBG0SEL_SH - 2 * byte); } } @@ -519,7 +523,7 @@ static int p4_compute_mmcr(u64 event[], int n_ev, return 0; } -static void p4_disable_pmc(unsigned int pmc, u64 mmcr[]) +static void p4_disable_pmc(unsigned int pmc, unsigned long mmcr[]) { /* * Setting the PMCxSEL field to 0 disables PMC x. @@ -584,15 +588,15 @@ static int power4_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = { }; struct power_pmu power4_pmu = { - .n_counter = 8, - .max_alternatives = 5, - .add_fields = 0x0000001100005555ull, - .test_adder = 0x0011083300000000ull, - .compute_mmcr = p4_compute_mmcr, - .get_constraint = p4_get_constraint, - .get_alternatives = p4_get_alternatives, - .disable_pmc = p4_disable_pmc, - .n_generic = ARRAY_SIZE(p4_generic_events), - .generic_events = p4_generic_events, - .cache_events = &power4_cache_events, + .n_counter = 8, + .max_alternatives = 5, + .add_fields = 0x0000001100005555ul, + .test_adder = 0x0011083300000000ul, + .compute_mmcr = p4_compute_mmcr, + .get_constraint = p4_get_constraint, + .get_alternatives = p4_get_alternatives, + .disable_pmc = p4_disable_pmc, + .n_generic = ARRAY_SIZE(p4_generic_events), + .generic_events = p4_generic_events, + .cache_events = &power4_cache_events, }; diff --git a/arch/powerpc/kernel/power5+-pmu.c b/arch/powerpc/kernel/power5+-pmu.c index 41e5d2d..aef144d 100644 --- a/arch/powerpc/kernel/power5+-pmu.c +++ b/arch/powerpc/kernel/power5+-pmu.c @@ -126,20 +126,21 @@ static const int grsel_shift[8] = { }; /* Masks and values for using events from the various units */ -static u64 unit_cons[PM_LASTUNIT+1][2] = { - [PM_FPU] = { 0x3200000000ull, 0x0100000000ull }, - [PM_ISU0] = { 0x0200000000ull, 0x0080000000ull }, - [PM_ISU1] = { 0x3200000000ull, 0x3100000000ull }, - [PM_IFU] = { 0x3200000000ull, 0x2100000000ull }, - [PM_IDU] = { 0x0e00000000ull, 0x0040000000ull }, - [PM_GRS] = { 0x0e00000000ull, 0x0c40000000ull }, +static unsigned long unit_cons[PM_LASTUNIT+1][2] = { + [PM_FPU] = { 0x3200000000ul, 0x0100000000ul }, + [PM_ISU0] = { 0x0200000000ul, 0x0080000000ul }, + [PM_ISU1] = { 0x3200000000ul, 0x3100000000ul }, + [PM_IFU] = { 0x3200000000ul, 0x2100000000ul }, + [PM_IDU] = { 0x0e00000000ul, 0x0040000000ul }, + [PM_GRS] = { 0x0e00000000ul, 0x0c40000000ul }, }; -static int power5p_get_constraint(u64 event, u64 *maskp, u64 *valp) +static int power5p_get_constraint(u64 event, unsigned long *maskp, + unsigned long *valp) { int pmc, byte, unit, sh; int bit, fmask; - u64 mask = 0, value = 0; + unsigned long mask = 0, value = 0; pmc = (event >> PM_PMC_SH) & PM_PMC_MSK; if (pmc) { @@ -171,17 +172,18 @@ static int power5p_get_constraint(u64 event, u64 *maskp, u64 *valp) bit = event & 7; fmask = (bit == 6)? 7: 3; sh = grsel_shift[bit]; - mask |= (u64)fmask << sh; - value |= (u64)((event >> PM_GRS_SH) & fmask) << sh; + mask |= (unsigned long)fmask << sh; + value |= (unsigned long)((event >> PM_GRS_SH) & fmask) + << sh; } /* Set byte lane select field */ - mask |= 0xfULL << (24 - 4 * byte); - value |= (u64)unit << (24 - 4 * byte); + mask |= 0xfUL << (24 - 4 * byte); + value |= (unsigned long)unit << (24 - 4 * byte); } if (pmc < 5) { /* need a counter from PMC1-4 set */ - mask |= 0x8000000000000ull; - value |= 0x1000000000000ull; + mask |= 0x8000000000000ul; + value |= 0x1000000000000ul; } *maskp = mask; *valp = value; @@ -452,10 +454,10 @@ static int power5p_marked_instr_event(u64 event) } static int power5p_compute_mmcr(u64 event[], int n_ev, - unsigned int hwc[], u64 mmcr[]) + unsigned int hwc[], unsigned long mmcr[]) { - u64 mmcr1 = 0; - u64 mmcra = 0; + unsigned long mmcr1 = 0; + unsigned long mmcra = 0; unsigned int pmc, unit, byte, psel; unsigned int ttm; int i, isbus, bit, grsel; @@ -517,7 +519,7 @@ static int power5p_compute_mmcr(u64 event[], int n_ev, continue; if (ttmuse++) return -1; - mmcr1 |= (u64)i << MMCR1_TTM0SEL_SH; + mmcr1 |= (unsigned long)i << MMCR1_TTM0SEL_SH; } ttmuse = 0; for (; i <= PM_GRS; ++i) { @@ -525,7 +527,7 @@ static int power5p_compute_mmcr(u64 event[], int n_ev, continue; if (ttmuse++) return -1; - mmcr1 |= (u64)(i & 3) << MMCR1_TTM1SEL_SH; + mmcr1 |= (unsigned long)(i & 3) << MMCR1_TTM1SEL_SH; } if (ttmuse > 1) return -1; @@ -540,10 +542,11 @@ static int power5p_compute_mmcr(u64 event[], int n_ev, unit = PM_ISU0_ALT; } else if (unit == PM_LSU1 + 1) { /* select lower word of LSU1 for this byte */ - mmcr1 |= 1ull << (MMCR1_TTM3SEL_SH + 3 - byte); + mmcr1 |= 1ul << (MMCR1_TTM3SEL_SH + 3 - byte); } ttm = unit >> 2; - mmcr1 |= (u64)ttm << (MMCR1_TD_CP_DBG0SEL_SH - 2 * byte); + mmcr1 |= (unsigned long)ttm + << (MMCR1_TD_CP_DBG0SEL_SH - 2 * byte); } /* Second pass: assign PMCs, set PMCxSEL and PMCx_ADDER_SEL fields */ @@ -568,7 +571,7 @@ static int power5p_compute_mmcr(u64 event[], int n_ev, if (isbus && (byte & 2) && (psel == 8 || psel == 0x10 || psel == 0x28)) /* add events on higher-numbered bus */ - mmcr1 |= 1ull << (MMCR1_PMC1_ADDER_SEL_SH - pmc); + mmcr1 |= 1ul << (MMCR1_PMC1_ADDER_SEL_SH - pmc); } else { /* Instructions or run cycles on PMC5/6 */ --pmc; @@ -576,7 +579,7 @@ static int power5p_compute_mmcr(u64 event[], int n_ev, if (isbus && unit == PM_GRS) { bit = psel & 7; grsel = (event[i] >> PM_GRS_SH) & PM_GRS_MSK; - mmcr1 |= (u64)grsel << grsel_shift[bit]; + mmcr1 |= (unsigned long)grsel << grsel_shift[bit]; } if (power5p_marked_instr_event(event[i])) mmcra |= MMCRA_SAMPLE_ENABLE; @@ -599,7 +602,7 @@ static int power5p_compute_mmcr(u64 event[], int n_ev, return 0; } -static void power5p_disable_pmc(unsigned int pmc, u64 mmcr[]) +static void power5p_disable_pmc(unsigned int pmc, unsigned long mmcr[]) { if (pmc <= 3) mmcr[1] &= ~(0x7fUL << MMCR1_PMCSEL_SH(pmc)); @@ -655,17 +658,17 @@ static int power5p_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = { }; struct power_pmu power5p_pmu = { - .n_counter = 6, - .max_alternatives = MAX_ALT, - .add_fields = 0x7000000000055ull, - .test_adder = 0x3000040000000ull, - .compute_mmcr = power5p_compute_mmcr, - .get_constraint = power5p_get_constraint, - .get_alternatives = power5p_get_alternatives, - .disable_pmc = power5p_disable_pmc, - .limited_pmc_event = power5p_limited_pmc_event, - .flags = PPMU_LIMITED_PMC5_6, - .n_generic = ARRAY_SIZE(power5p_generic_events), - .generic_events = power5p_generic_events, - .cache_events = &power5p_cache_events, + .n_counter = 6, + .max_alternatives = MAX_ALT, + .add_fields = 0x7000000000055ul, + .test_adder = 0x3000040000000ul, + .compute_mmcr = power5p_compute_mmcr, + .get_constraint = power5p_get_constraint, + .get_alternatives = power5p_get_alternatives, + .disable_pmc = power5p_disable_pmc, + .limited_pmc_event = power5p_limited_pmc_event, + .flags = PPMU_LIMITED_PMC5_6, + .n_generic = ARRAY_SIZE(power5p_generic_events), + .generic_events = power5p_generic_events, + .cache_events = &power5p_cache_events, }; diff --git a/arch/powerpc/kernel/power5-pmu.c b/arch/powerpc/kernel/power5-pmu.c index 05600b6..8694c73 100644 --- a/arch/powerpc/kernel/power5-pmu.c +++ b/arch/powerpc/kernel/power5-pmu.c @@ -130,20 +130,21 @@ static const int grsel_shift[8] = { }; /* Masks and values for using events from the various units */ -static u64 unit_cons[PM_LASTUNIT+1][2] = { - [PM_FPU] = { 0xc0002000000000ull, 0x00001000000000ull }, - [PM_ISU0] = { 0x00002000000000ull, 0x00000800000000ull }, - [PM_ISU1] = { 0xc0002000000000ull, 0xc0001000000000ull }, - [PM_IFU] = { 0xc0002000000000ull, 0x80001000000000ull }, - [PM_IDU] = { 0x30002000000000ull, 0x00000400000000ull }, - [PM_GRS] = { 0x30002000000000ull, 0x30000400000000ull }, +static unsigned long unit_cons[PM_LASTUNIT+1][2] = { + [PM_FPU] = { 0xc0002000000000ul, 0x00001000000000ul }, + [PM_ISU0] = { 0x00002000000000ul, 0x00000800000000ul }, + [PM_ISU1] = { 0xc0002000000000ul, 0xc0001000000000ul }, + [PM_IFU] = { 0xc0002000000000ul, 0x80001000000000ul }, + [PM_IDU] = { 0x30002000000000ul, 0x00000400000000ul }, + [PM_GRS] = { 0x30002000000000ul, 0x30000400000000ul }, }; -static int power5_get_constraint(u64 event, u64 *maskp, u64 *valp) +static int power5_get_constraint(u64 event, unsigned long *maskp, + unsigned long *valp) { int pmc, byte, unit, sh; int bit, fmask; - u64 mask = 0, value = 0; + unsigned long mask = 0, value = 0; int grp = -1; pmc = (event >> PM_PMC_SH) & PM_PMC_MSK; @@ -178,8 +179,9 @@ static int power5_get_constraint(u64 event, u64 *maskp, u64 *valp) bit = event & 7; fmask = (bit == 6)? 7: 3; sh = grsel_shift[bit]; - mask |= (u64)fmask << sh; - value |= (u64)((event >> PM_GRS_SH) & fmask) << sh; + mask |= (unsigned long)fmask << sh; + value |= (unsigned long)((event >> PM_GRS_SH) & fmask) + << sh; } /* * Bus events on bytes 0 and 2 can be counted @@ -188,22 +190,22 @@ static int power5_get_constraint(u64 event, u64 *maskp, u64 *valp) if (!pmc) grp = byte & 1; /* Set byte lane select field */ - mask |= 0xfULL << (24 - 4 * byte); - value |= (u64)unit << (24 - 4 * byte); + mask |= 0xfUL << (24 - 4 * byte); + value |= (unsigned long)unit << (24 - 4 * byte); } if (grp == 0) { /* increment PMC1/2 field */ - mask |= 0x200000000ull; - value |= 0x080000000ull; + mask |= 0x200000000ul; + value |= 0x080000000ul; } else if (grp == 1) { /* increment PMC3/4 field */ - mask |= 0x40000000ull; - value |= 0x10000000ull; + mask |= 0x40000000ul; + value |= 0x10000000ul; } if (pmc < 5) { /* need a counter from PMC1-4 set */ - mask |= 0x8000000000000ull; - value |= 0x1000000000000ull; + mask |= 0x8000000000000ul; + value |= 0x1000000000000ul; } *maskp = mask; *valp = value; @@ -383,10 +385,10 @@ static int power5_marked_instr_event(u64 event) } static int power5_compute_mmcr(u64 event[], int n_ev, - unsigned int hwc[], u64 mmcr[]) + unsigned int hwc[], unsigned long mmcr[]) { - u64 mmcr1 = 0; - u64 mmcra = 0; + unsigned long mmcr1 = 0; + unsigned long mmcra = 0; unsigned int pmc, unit, byte, psel; unsigned int ttm, grp; int i, isbus, bit, grsel; @@ -457,7 +459,7 @@ static int power5_compute_mmcr(u64 event[], int n_ev, continue; if (ttmuse++) return -1; - mmcr1 |= (u64)i << MMCR1_TTM0SEL_SH; + mmcr1 |= (unsigned long)i << MMCR1_TTM0SEL_SH; } ttmuse = 0; for (; i <= PM_GRS; ++i) { @@ -465,7 +467,7 @@ static int power5_compute_mmcr(u64 event[], int n_ev, continue; if (ttmuse++) return -1; - mmcr1 |= (u64)(i & 3) << MMCR1_TTM1SEL_SH; + mmcr1 |= (unsigned long)(i & 3) << MMCR1_TTM1SEL_SH; } if (ttmuse > 1) return -1; @@ -480,10 +482,11 @@ static int power5_compute_mmcr(u64 event[], int n_ev, unit = PM_ISU0_ALT; } else if (unit == PM_LSU1 + 1) { /* select lower word of LSU1 for this byte */ - mmcr1 |= 1ull << (MMCR1_TTM3SEL_SH + 3 - byte); + mmcr1 |= 1ul << (MMCR1_TTM3SEL_SH + 3 - byte); } ttm = unit >> 2; - mmcr1 |= (u64)ttm << (MMCR1_TD_CP_DBG0SEL_SH - 2 * byte); + mmcr1 |= (unsigned long)ttm + << (MMCR1_TD_CP_DBG0SEL_SH - 2 * byte); } /* Second pass: assign PMCs, set PMCxSEL and PMCx_ADDER_SEL fields */ @@ -513,7 +516,7 @@ static int power5_compute_mmcr(u64 event[], int n_ev, --pmc; if ((psel == 8 || psel == 0x10) && isbus && (byte & 2)) /* add events on higher-numbered bus */ - mmcr1 |= 1ull << (MMCR1_PMC1_ADDER_SEL_SH - pmc); + mmcr1 |= 1ul << (MMCR1_PMC1_ADDER_SEL_SH - pmc); } else { /* Instructions or run cycles on PMC5/6 */ --pmc; @@ -521,7 +524,7 @@ static int power5_compute_mmcr(u64 event[], int n_ev, if (isbus && unit == PM_GRS) { bit = psel & 7; grsel = (event[i] >> PM_GRS_SH) & PM_GRS_MSK; - mmcr1 |= (u64)grsel << grsel_shift[bit]; + mmcr1 |= (unsigned long)grsel << grsel_shift[bit]; } if (power5_marked_instr_event(event[i])) mmcra |= MMCRA_SAMPLE_ENABLE; @@ -541,7 +544,7 @@ static int power5_compute_mmcr(u64 event[], int n_ev, return 0; } -static void power5_disable_pmc(unsigned int pmc, u64 mmcr[]) +static void power5_disable_pmc(unsigned int pmc, unsigned long mmcr[]) { if (pmc <= 3) mmcr[1] &= ~(0x7fUL << MMCR1_PMCSEL_SH(pmc)); @@ -597,15 +600,15 @@ static int power5_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = { }; struct power_pmu power5_pmu = { - .n_counter = 6, - .max_alternatives = MAX_ALT, - .add_fields = 0x7000090000555ull, - .test_adder = 0x3000490000000ull, - .compute_mmcr = power5_compute_mmcr, - .get_constraint = power5_get_constraint, - .get_alternatives = power5_get_alternatives, - .disable_pmc = power5_disable_pmc, - .n_generic = ARRAY_SIZE(power5_generic_events), - .generic_events = power5_generic_events, - .cache_events = &power5_cache_events, + .n_counter = 6, + .max_alternatives = MAX_ALT, + .add_fields = 0x7000090000555ul, + .test_adder = 0x3000490000000ul, + .compute_mmcr = power5_compute_mmcr, + .get_constraint = power5_get_constraint, + .get_alternatives = power5_get_alternatives, + .disable_pmc = power5_disable_pmc, + .n_generic = ARRAY_SIZE(power5_generic_events), + .generic_events = power5_generic_events, + .cache_events = &power5_cache_events, }; diff --git a/arch/powerpc/kernel/power6-pmu.c b/arch/powerpc/kernel/power6-pmu.c index 46f74be..8898622 100644 --- a/arch/powerpc/kernel/power6-pmu.c +++ b/arch/powerpc/kernel/power6-pmu.c @@ -41,9 +41,9 @@ #define MMCR1_NESTSEL_SH 45 #define MMCR1_NESTSEL_MSK 0x7 #define MMCR1_NESTSEL(m) (((m) >> MMCR1_NESTSEL_SH) & MMCR1_NESTSEL_MSK) -#define MMCR1_PMC1_LLA ((u64)1 << 44) -#define MMCR1_PMC1_LLA_VALUE ((u64)1 << 39) -#define MMCR1_PMC1_ADDR_SEL ((u64)1 << 35) +#define MMCR1_PMC1_LLA (1ul << 44) +#define MMCR1_PMC1_LLA_VALUE (1ul << 39) +#define MMCR1_PMC1_ADDR_SEL (1ul << 35) #define MMCR1_PMC1SEL_SH 24 #define MMCR1_PMCSEL_SH(n) (MMCR1_PMC1SEL_SH - (n) * 8) #define MMCR1_PMCSEL_MSK 0xff @@ -173,10 +173,10 @@ static int power6_marked_instr_event(u64 event) * Assign PMC numbers and compute MMCR1 value for a set of events */ static int p6_compute_mmcr(u64 event[], int n_ev, - unsigned int hwc[], u64 mmcr[]) + unsigned int hwc[], unsigned long mmcr[]) { - u64 mmcr1 = 0; - u64 mmcra = 0; + unsigned long mmcr1 = 0; + unsigned long mmcra = 0; int i; unsigned int pmc, ev, b, u, s, psel; unsigned int ttmset = 0; @@ -215,7 +215,7 @@ static int p6_compute_mmcr(u64 event[], int n_ev, /* check for conflict on this byte of event bus */ if ((ttmset & (1 << b)) && MMCR1_TTMSEL(mmcr1, b) != u) return -1; - mmcr1 |= (u64)u << MMCR1_TTMSEL_SH(b); + mmcr1 |= (unsigned long)u << MMCR1_TTMSEL_SH(b); ttmset |= 1 << b; if (u == 5) { /* Nest events have a further mux */ @@ -224,7 +224,7 @@ static int p6_compute_mmcr(u64 event[], int n_ev, MMCR1_NESTSEL(mmcr1) != s) return -1; ttmset |= 0x10; - mmcr1 |= (u64)s << MMCR1_NESTSEL_SH; + mmcr1 |= (unsigned long)s << MMCR1_NESTSEL_SH; } if (0x30 <= psel && psel <= 0x3d) { /* these need the PMCx_ADDR_SEL bits */ @@ -243,7 +243,7 @@ static int p6_compute_mmcr(u64 event[], int n_ev, if (power6_marked_instr_event(event[i])) mmcra |= MMCRA_SAMPLE_ENABLE; if (pmc < 4) - mmcr1 |= (u64)psel << MMCR1_PMCSEL_SH(pmc); + mmcr1 |= (unsigned long)psel << MMCR1_PMCSEL_SH(pmc); } mmcr[0] = 0; if (pmc_inuse & 1) @@ -265,10 +265,11 @@ static int p6_compute_mmcr(u64 event[], int n_ev, * 20-23, 24-27, 28-31 ditto for bytes 1, 2, 3 * 32-34 select field: nest (subunit) event selector */ -static int p6_get_constraint(u64 event, u64 *maskp, u64 *valp) +static int p6_get_constraint(u64 event, unsigned long *maskp, + unsigned long *valp) { int pmc, byte, sh, subunit; - u64 mask = 0, value = 0; + unsigned long mask = 0, value = 0; pmc = (event >> PM_PMC_SH) & PM_PMC_MSK; if (pmc) { @@ -282,11 +283,11 @@ static int p6_get_constraint(u64 event, u64 *maskp, u64 *valp) byte = (event >> PM_BYTE_SH) & PM_BYTE_MSK; sh = byte * 4 + (16 - PM_UNIT_SH); mask |= PM_UNIT_MSKS << sh; - value |= (u64)(event & PM_UNIT_MSKS) << sh; + value |= (unsigned long)(event & PM_UNIT_MSKS) << sh; if ((event & PM_UNIT_MSKS) == (5 << PM_UNIT_SH)) { subunit = (event >> PM_SUBUNIT_SH) & PM_SUBUNIT_MSK; - mask |= (u64)PM_SUBUNIT_MSK << 32; - value |= (u64)subunit << 32; + mask |= (unsigned long)PM_SUBUNIT_MSK << 32; + value |= (unsigned long)subunit << 32; } } if (pmc <= 4) { @@ -458,7 +459,7 @@ static int p6_get_alternatives(u64 event, unsigned int flags, u64 alt[]) return nalt; } -static void p6_disable_pmc(unsigned int pmc, u64 mmcr[]) +static void p6_disable_pmc(unsigned int pmc, unsigned long mmcr[]) { /* Set PMCxSEL to 0 to disable PMCx */ if (pmc <= 3) @@ -516,17 +517,17 @@ static int power6_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = { }; struct power_pmu power6_pmu = { - .n_counter = 6, - .max_alternatives = MAX_ALT, - .add_fields = 0x1555, - .test_adder = 0x3000, - .compute_mmcr = p6_compute_mmcr, - .get_constraint = p6_get_constraint, - .get_alternatives = p6_get_alternatives, - .disable_pmc = p6_disable_pmc, - .limited_pmc_event = p6_limited_pmc_event, - .flags = PPMU_LIMITED_PMC5_6 | PPMU_ALT_SIPR, - .n_generic = ARRAY_SIZE(power6_generic_events), - .generic_events = power6_generic_events, - .cache_events = &power6_cache_events, + .n_counter = 6, + .max_alternatives = MAX_ALT, + .add_fields = 0x1555, + .test_adder = 0x3000, + .compute_mmcr = p6_compute_mmcr, + .get_constraint = p6_get_constraint, + .get_alternatives = p6_get_alternatives, + .disable_pmc = p6_disable_pmc, + .limited_pmc_event = p6_limited_pmc_event, + .flags = PPMU_LIMITED_PMC5_6 | PPMU_ALT_SIPR, + .n_generic = ARRAY_SIZE(power6_generic_events), + .generic_events = power6_generic_events, + .cache_events = &power6_cache_events, }; diff --git a/arch/powerpc/kernel/power7-pmu.c b/arch/powerpc/kernel/power7-pmu.c index b72e7a1..658d1ae4 100644 --- a/arch/powerpc/kernel/power7-pmu.c +++ b/arch/powerpc/kernel/power7-pmu.c @@ -71,10 +71,11 @@ * 0-9: Count of events needing PMC1..PMC5 */ -static int power7_get_constraint(u64 event, u64 *maskp, u64 *valp) +static int power7_get_constraint(u64 event, unsigned long *maskp, + unsigned long *valp) { int pmc, sh; - u64 mask = 0, value = 0; + unsigned long mask = 0, value = 0; pmc = (event >> PM_PMC_SH) & PM_PMC_MSK; if (pmc) { @@ -224,10 +225,10 @@ static int power7_marked_instr_event(u64 event) } static int power7_compute_mmcr(u64 event[], int n_ev, - unsigned int hwc[], u64 mmcr[]) + unsigned int hwc[], unsigned long mmcr[]) { - u64 mmcr1 = 0; - u64 mmcra = 0; + unsigned long mmcr1 = 0; + unsigned long mmcra = 0; unsigned int pmc, unit, combine, l2sel, psel; unsigned int pmc_inuse = 0; int i; @@ -265,11 +266,14 @@ static int power7_compute_mmcr(u64 event[], int n_ev, --pmc; } if (pmc <= 3) { - mmcr1 |= (u64) unit << (MMCR1_TTM0SEL_SH - 4 * pmc); - mmcr1 |= (u64) combine << (MMCR1_PMC1_COMBINE_SH - pmc); + mmcr1 |= (unsigned long) unit + << (MMCR1_TTM0SEL_SH - 4 * pmc); + mmcr1 |= (unsigned long) combine + << (MMCR1_PMC1_COMBINE_SH - pmc); mmcr1 |= psel << MMCR1_PMCSEL_SH(pmc); if (unit == 6) /* L2 events */ - mmcr1 |= (u64) l2sel << MMCR1_L2SEL_SH; + mmcr1 |= (unsigned long) l2sel + << MMCR1_L2SEL_SH; } if (power7_marked_instr_event(event[i])) mmcra |= MMCRA_SAMPLE_ENABLE; @@ -287,10 +291,10 @@ static int power7_compute_mmcr(u64 event[], int n_ev, return 0; } -static void power7_disable_pmc(unsigned int pmc, u64 mmcr[]) +static void power7_disable_pmc(unsigned int pmc, unsigned long mmcr[]) { if (pmc <= 3) - mmcr[1] &= ~(0xffULL << MMCR1_PMCSEL_SH(pmc)); + mmcr[1] &= ~(0xffUL << MMCR1_PMCSEL_SH(pmc)); } static int power7_generic_events[] = { @@ -343,15 +347,15 @@ static int power7_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = { }; struct power_pmu power7_pmu = { - .n_counter = 6, - .max_alternatives = MAX_ALT + 1, - .add_fields = 0x1555ull, - .test_adder = 0x3000ull, - .compute_mmcr = power7_compute_mmcr, - .get_constraint = power7_get_constraint, - .get_alternatives = power7_get_alternatives, - .disable_pmc = power7_disable_pmc, - .n_generic = ARRAY_SIZE(power7_generic_events), - .generic_events = power7_generic_events, - .cache_events = &power7_cache_events, + .n_counter = 6, + .max_alternatives = MAX_ALT + 1, + .add_fields = 0x1555ul, + .test_adder = 0x3000ul, + .compute_mmcr = power7_compute_mmcr, + .get_constraint = power7_get_constraint, + .get_alternatives = power7_get_alternatives, + .disable_pmc = power7_disable_pmc, + .n_generic = ARRAY_SIZE(power7_generic_events), + .generic_events = power7_generic_events, + .cache_events = &power7_cache_events, }; diff --git a/arch/powerpc/kernel/ppc970-pmu.c b/arch/powerpc/kernel/ppc970-pmu.c index ba0a357..3ed8833 100644 --- a/arch/powerpc/kernel/ppc970-pmu.c +++ b/arch/powerpc/kernel/ppc970-pmu.c @@ -183,7 +183,7 @@ static int p970_marked_instr_event(u64 event) } /* Masks and values for using events from the various units */ -static u64 unit_cons[PM_LASTUNIT+1][2] = { +static unsigned long unit_cons[PM_LASTUNIT+1][2] = { [PM_FPU] = { 0xc80000000000ull, 0x040000000000ull }, [PM_VPU] = { 0xc80000000000ull, 0xc40000000000ull }, [PM_ISU] = { 0x080000000000ull, 0x020000000000ull }, @@ -192,10 +192,11 @@ static u64 unit_cons[PM_LASTUNIT+1][2] = { [PM_STS] = { 0x380000000000ull, 0x310000000000ull }, }; -static int p970_get_constraint(u64 event, u64 *maskp, u64 *valp) +static int p970_get_constraint(u64 event, unsigned long *maskp, + unsigned long *valp) { int pmc, byte, unit, sh, spcsel; - u64 mask = 0, value = 0; + unsigned long mask = 0, value = 0; int grp = -1; pmc = (event >> PM_PMC_SH) & PM_PMC_MSK; @@ -222,7 +223,7 @@ static int p970_get_constraint(u64 event, u64 *maskp, u64 *valp) grp = byte & 1; /* Set byte lane select field */ mask |= 0xfULL << (28 - 4 * byte); - value |= (u64)unit << (28 - 4 * byte); + value |= (unsigned long)unit << (28 - 4 * byte); } if (grp == 0) { /* increment PMC1/2/5/6 field */ @@ -236,7 +237,7 @@ static int p970_get_constraint(u64 event, u64 *maskp, u64 *valp) spcsel = (event >> PM_SPCSEL_SH) & PM_SPCSEL_MSK; if (spcsel) { mask |= 3ull << 48; - value |= (u64)spcsel << 48; + value |= (unsigned long)spcsel << 48; } *maskp = mask; *valp = value; @@ -257,9 +258,9 @@ static int p970_get_alternatives(u64 event, unsigned int flags, u64 alt[]) } static int p970_compute_mmcr(u64 event[], int n_ev, - unsigned int hwc[], u64 mmcr[]) + unsigned int hwc[], unsigned long mmcr[]) { - u64 mmcr0 = 0, mmcr1 = 0, mmcra = 0; + unsigned long mmcr0 = 0, mmcr1 = 0, mmcra = 0; unsigned int pmc, unit, byte, psel; unsigned int ttm, grp; unsigned int pmc_inuse = 0; @@ -320,7 +321,7 @@ static int p970_compute_mmcr(u64 event[], int n_ev, continue; ttm = unitmap[i]; ++ttmuse[(ttm >> 2) & 1]; - mmcr1 |= (u64)(ttm & ~4) << MMCR1_TTM1SEL_SH; + mmcr1 |= (unsigned long)(ttm & ~4) << MMCR1_TTM1SEL_SH; } /* Check only one unit per TTMx */ if (ttmuse[0] > 1 || ttmuse[1] > 1) @@ -340,7 +341,8 @@ static int p970_compute_mmcr(u64 event[], int n_ev, if (unit == PM_LSU1L && byte >= 2) mmcr1 |= 1ull << (MMCR1_TTM3SEL_SH + 3 - byte); } - mmcr1 |= (u64)ttm << (MMCR1_TD_CP_DBG0SEL_SH - 2 * byte); + mmcr1 |= (unsigned long)ttm + << (MMCR1_TD_CP_DBG0SEL_SH - 2 * byte); } /* Second pass: assign PMCs, set PMCxSEL and PMCx_ADDER_SEL fields */ @@ -386,7 +388,8 @@ static int p970_compute_mmcr(u64 event[], int n_ev, for (pmc = 0; pmc < 2; ++pmc) mmcr0 |= pmcsel[pmc] << (MMCR0_PMC1SEL_SH - 7 * pmc); for (; pmc < 8; ++pmc) - mmcr1 |= (u64)pmcsel[pmc] << (MMCR1_PMC3SEL_SH - 5 * (pmc - 2)); + mmcr1 |= (unsigned long)pmcsel[pmc] + << (MMCR1_PMC3SEL_SH - 5 * (pmc - 2)); if (pmc_inuse & 1) mmcr0 |= MMCR0_PMC1CE; if (pmc_inuse & 0xfe) @@ -401,7 +404,7 @@ static int p970_compute_mmcr(u64 event[], int n_ev, return 0; } -static void p970_disable_pmc(unsigned int pmc, u64 mmcr[]) +static void p970_disable_pmc(unsigned int pmc, unsigned long mmcr[]) { int shift, i; @@ -468,15 +471,15 @@ static int ppc970_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = { }; struct power_pmu ppc970_pmu = { - .n_counter = 8, - .max_alternatives = 2, - .add_fields = 0x001100005555ull, - .test_adder = 0x013300000000ull, - .compute_mmcr = p970_compute_mmcr, - .get_constraint = p970_get_constraint, - .get_alternatives = p970_get_alternatives, - .disable_pmc = p970_disable_pmc, - .n_generic = ARRAY_SIZE(ppc970_generic_events), - .generic_events = ppc970_generic_events, - .cache_events = &ppc970_cache_events, + .n_counter = 8, + .max_alternatives = 2, + .add_fields = 0x001100005555ull, + .test_adder = 0x013300000000ull, + .compute_mmcr = p970_compute_mmcr, + .get_constraint = p970_get_constraint, + .get_alternatives = p970_get_alternatives, + .disable_pmc = p970_disable_pmc, + .n_generic = ARRAY_SIZE(ppc970_generic_events), + .generic_events = ppc970_generic_events, + .cache_events = &ppc970_cache_events, }; -- cgit v1.1 From 079b3c569c87819e7a19d9b9f51d4746fc47bf9a Mon Sep 17 00:00:00 2001 From: Paul Mackerras <paulus@samba.org> Date: Wed, 17 Jun 2009 21:52:09 +1000 Subject: perf_counter: powerpc: Change how processor-specific back-ends get selected At present, the powerpc generic (processor-independent) perf_counter code has list of processor back-end modules, and at initialization, it looks at the PVR (processor version register) and has a switch statement to select a suitable processor-specific back-end. This is going to become inconvenient as we add more processor-specific back-ends, so this inverts the order: now each back-end checks whether it applies to the current processor, and registers itself if so. Furthermore, instead of looking at the PVR, back-ends now check the cur_cpu_spec->oprofile_cpu_type string and match on that. Lastly, each back-end now specifies a name for itself so the core can print a nice message when a back-end registers itself. This doesn't provide any support for unregistering back-ends, but that wouldn't be hard to do and would allow back-ends to be modules. Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: linuxppc-dev@ozlabs.org Cc: benh@kernel.crashing.org LKML-Reference: <19000.55529.762227.518531@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/powerpc/include/asm/perf_counter.h | 5 ++-- arch/powerpc/kernel/perf_counter.c | 44 ++++++--------------------------- arch/powerpc/kernel/power4-pmu.c | 15 ++++++++++- arch/powerpc/kernel/power5+-pmu.c | 16 +++++++++++- arch/powerpc/kernel/power5-pmu.c | 15 ++++++++++- arch/powerpc/kernel/power6-pmu.c | 15 ++++++++++- arch/powerpc/kernel/power7-pmu.c | 15 ++++++++++- arch/powerpc/kernel/ppc970-pmu.c | 16 +++++++++++- 8 files changed, 96 insertions(+), 45 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/perf_counter.h b/arch/powerpc/include/asm/perf_counter.h index 2ceb0fe..8ccd4e1 100644 --- a/arch/powerpc/include/asm/perf_counter.h +++ b/arch/powerpc/include/asm/perf_counter.h @@ -21,6 +21,7 @@ * describe the PMU on a particular POWER-family CPU. */ struct power_pmu { + const char *name; int n_counter; int max_alternatives; unsigned long add_fields; @@ -41,8 +42,6 @@ struct power_pmu { [PERF_COUNT_HW_CACHE_RESULT_MAX]; }; -extern struct power_pmu *ppmu; - /* * Values for power_pmu.flags */ @@ -56,6 +55,8 @@ extern struct power_pmu *ppmu; #define PPMU_LIMITED_PMC_REQD 2 /* have to put this on a limited PMC */ #define PPMU_ONLY_COUNT_RUN 4 /* only counting in run state */ +extern int register_power_pmu(struct power_pmu *); + struct pt_regs; extern unsigned long perf_misc_flags(struct pt_regs *regs); extern unsigned long perf_instruction_pointer(struct pt_regs *regs); diff --git a/arch/powerpc/kernel/perf_counter.c b/arch/powerpc/kernel/perf_counter.c index 9300638..25e656c 100644 --- a/arch/powerpc/kernel/perf_counter.c +++ b/arch/powerpc/kernel/perf_counter.c @@ -1214,42 +1214,14 @@ void hw_perf_counter_setup(int cpu) cpuhw->mmcr[0] = MMCR0_FC; } -extern struct power_pmu power4_pmu; -extern struct power_pmu ppc970_pmu; -extern struct power_pmu power5_pmu; -extern struct power_pmu power5p_pmu; -extern struct power_pmu power6_pmu; -extern struct power_pmu power7_pmu; - -static int init_perf_counters(void) +int register_power_pmu(struct power_pmu *pmu) { - unsigned long pvr; - - /* XXX should get this from cputable */ - pvr = mfspr(SPRN_PVR); - switch (PVR_VER(pvr)) { - case PV_POWER4: - case PV_POWER4p: - ppmu = &power4_pmu; - break; - case PV_970: - case PV_970FX: - case PV_970MP: - ppmu = &ppc970_pmu; - break; - case PV_POWER5: - ppmu = &power5_pmu; - break; - case PV_POWER5p: - ppmu = &power5p_pmu; - break; - case 0x3e: - ppmu = &power6_pmu; - break; - case 0x3f: - ppmu = &power7_pmu; - break; - } + if (ppmu) + return -EBUSY; /* something's already registered */ + + ppmu = pmu; + pr_info("%s performance monitor hardware support registered\n", + pmu->name); /* * Use FCHV to ignore kernel events if MSR.HV is set. @@ -1259,5 +1231,3 @@ static int init_perf_counters(void) return 0; } - -arch_initcall(init_perf_counters); diff --git a/arch/powerpc/kernel/power4-pmu.c b/arch/powerpc/kernel/power4-pmu.c index 81a1708..db90b0c 100644 --- a/arch/powerpc/kernel/power4-pmu.c +++ b/arch/powerpc/kernel/power4-pmu.c @@ -10,7 +10,9 @@ */ #include <linux/kernel.h> #include <linux/perf_counter.h> +#include <linux/string.h> #include <asm/reg.h> +#include <asm/cputable.h> /* * Bits in event code for POWER4 @@ -587,7 +589,8 @@ static int power4_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = { }, }; -struct power_pmu power4_pmu = { +static struct power_pmu power4_pmu = { + .name = "POWER4/4+", .n_counter = 8, .max_alternatives = 5, .add_fields = 0x0000001100005555ul, @@ -600,3 +603,13 @@ struct power_pmu power4_pmu = { .generic_events = p4_generic_events, .cache_events = &power4_cache_events, }; + +static int init_power4_pmu(void) +{ + if (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power4")) + return -ENODEV; + + return register_power_pmu(&power4_pmu); +} + +arch_initcall(init_power4_pmu); diff --git a/arch/powerpc/kernel/power5+-pmu.c b/arch/powerpc/kernel/power5+-pmu.c index aef144d..f4adca8 100644 --- a/arch/powerpc/kernel/power5+-pmu.c +++ b/arch/powerpc/kernel/power5+-pmu.c @@ -10,7 +10,9 @@ */ #include <linux/kernel.h> #include <linux/perf_counter.h> +#include <linux/string.h> #include <asm/reg.h> +#include <asm/cputable.h> /* * Bits in event code for POWER5+ (POWER5 GS) and POWER5++ (POWER5 GS DD3) @@ -657,7 +659,8 @@ static int power5p_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = { }, }; -struct power_pmu power5p_pmu = { +static struct power_pmu power5p_pmu = { + .name = "POWER5+/++", .n_counter = 6, .max_alternatives = MAX_ALT, .add_fields = 0x7000000000055ul, @@ -672,3 +675,14 @@ struct power_pmu power5p_pmu = { .generic_events = power5p_generic_events, .cache_events = &power5p_cache_events, }; + +static int init_power5p_pmu(void) +{ + if (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power5+") + && strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power5++")) + return -ENODEV; + + return register_power_pmu(&power5p_pmu); +} + +arch_initcall(init_power5p_pmu); diff --git a/arch/powerpc/kernel/power5-pmu.c b/arch/powerpc/kernel/power5-pmu.c index 8694c73..29b2c6c 100644 --- a/arch/powerpc/kernel/power5-pmu.c +++ b/arch/powerpc/kernel/power5-pmu.c @@ -10,7 +10,9 @@ */ #include <linux/kernel.h> #include <linux/perf_counter.h> +#include <linux/string.h> #include <asm/reg.h> +#include <asm/cputable.h> /* * Bits in event code for POWER5 (not POWER5++) @@ -599,7 +601,8 @@ static int power5_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = { }, }; -struct power_pmu power5_pmu = { +static struct power_pmu power5_pmu = { + .name = "POWER5", .n_counter = 6, .max_alternatives = MAX_ALT, .add_fields = 0x7000090000555ul, @@ -612,3 +615,13 @@ struct power_pmu power5_pmu = { .generic_events = power5_generic_events, .cache_events = &power5_cache_events, }; + +static int init_power5_pmu(void) +{ + if (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power5")) + return -ENODEV; + + return register_power_pmu(&power5_pmu); +} + +arch_initcall(init_power5_pmu); diff --git a/arch/powerpc/kernel/power6-pmu.c b/arch/powerpc/kernel/power6-pmu.c index 8898622..09ae5bf 100644 --- a/arch/powerpc/kernel/power6-pmu.c +++ b/arch/powerpc/kernel/power6-pmu.c @@ -10,7 +10,9 @@ */ #include <linux/kernel.h> #include <linux/perf_counter.h> +#include <linux/string.h> #include <asm/reg.h> +#include <asm/cputable.h> /* * Bits in event code for POWER6 @@ -516,7 +518,8 @@ static int power6_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = { }, }; -struct power_pmu power6_pmu = { +static struct power_pmu power6_pmu = { + .name = "POWER6", .n_counter = 6, .max_alternatives = MAX_ALT, .add_fields = 0x1555, @@ -531,3 +534,13 @@ struct power_pmu power6_pmu = { .generic_events = power6_generic_events, .cache_events = &power6_cache_events, }; + +static int init_power6_pmu(void) +{ + if (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power6")) + return -ENODEV; + + return register_power_pmu(&power6_pmu); +} + +arch_initcall(init_power6_pmu); diff --git a/arch/powerpc/kernel/power7-pmu.c b/arch/powerpc/kernel/power7-pmu.c index 658d1ae4..5d755ef 100644 --- a/arch/powerpc/kernel/power7-pmu.c +++ b/arch/powerpc/kernel/power7-pmu.c @@ -10,7 +10,9 @@ */ #include <linux/kernel.h> #include <linux/perf_counter.h> +#include <linux/string.h> #include <asm/reg.h> +#include <asm/cputable.h> /* * Bits in event code for POWER7 @@ -346,7 +348,8 @@ static int power7_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = { }, }; -struct power_pmu power7_pmu = { +static struct power_pmu power7_pmu = { + .name = "POWER7", .n_counter = 6, .max_alternatives = MAX_ALT + 1, .add_fields = 0x1555ul, @@ -359,3 +362,13 @@ struct power_pmu power7_pmu = { .generic_events = power7_generic_events, .cache_events = &power7_cache_events, }; + +static int init_power7_pmu(void) +{ + if (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power7")) + return -ENODEV; + + return register_power_pmu(&power7_pmu); +} + +arch_initcall(init_power7_pmu); diff --git a/arch/powerpc/kernel/ppc970-pmu.c b/arch/powerpc/kernel/ppc970-pmu.c index 3ed8833..6637c87f 100644 --- a/arch/powerpc/kernel/ppc970-pmu.c +++ b/arch/powerpc/kernel/ppc970-pmu.c @@ -10,7 +10,9 @@ */ #include <linux/string.h> #include <linux/perf_counter.h> +#include <linux/string.h> #include <asm/reg.h> +#include <asm/cputable.h> /* * Bits in event code for PPC970 @@ -470,7 +472,8 @@ static int ppc970_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = { }, }; -struct power_pmu ppc970_pmu = { +static struct power_pmu ppc970_pmu = { + .name = "PPC970/FX/MP", .n_counter = 8, .max_alternatives = 2, .add_fields = 0x001100005555ull, @@ -483,3 +486,14 @@ struct power_pmu ppc970_pmu = { .generic_events = ppc970_generic_events, .cache_events = &ppc970_cache_events, }; + +static int init_ppc970_pmu(void) +{ + if (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/970") + && strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/970MP")) + return -ENODEV; + + return register_power_pmu(&ppc970_pmu); +} + +arch_initcall(init_ppc970_pmu); -- cgit v1.1 From 98fb1807b97e3e631b940f67544e265c64b984dc Mon Sep 17 00:00:00 2001 From: Paul Mackerras <paulus@samba.org> Date: Wed, 17 Jun 2009 21:53:10 +1000 Subject: perf_counter: powerpc: Make powerpc perf_counter code safe for 32-bit kernels This abstracts a few things in arch/powerpc/kernel/perf_counter.c that are specific to 64-bit kernels, and provides definitions for 32-bit kernels. In particular, * Only 64-bit has MMCRA and the bits in it that give information about a PMU interrupt (sampled PR, HV, slot number etc.) * Only 64-bit has the lppaca and the lppaca->pmcregs_in_use field * Use of SDAR is confined to 64-bit for now * Only 64-bit has soft/lazy interrupt disable and therefore pseudo-NMIs (interrupts that occur while interrupts are soft-disabled) * Only 64-bit has PMC7 and PMC8 * Only 64-bit has the MSR_HV bit. This also fixes the types used in a couple of places, where we were using long types for things that need to be 64-bit. Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: linuxppc-dev@ozlabs.org Cc: benh@kernel.crashing.org LKML-Reference: <19000.55590.634126.876084@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/powerpc/kernel/perf_counter.c | 193 +++++++++++++++++++++++++------------ 1 file changed, 133 insertions(+), 60 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/perf_counter.c b/arch/powerpc/kernel/perf_counter.c index 25e656c..809fdf9 100644 --- a/arch/powerpc/kernel/perf_counter.c +++ b/arch/powerpc/kernel/perf_counter.c @@ -46,6 +46,115 @@ struct power_pmu *ppmu; */ static unsigned int freeze_counters_kernel = MMCR0_FCS; +/* + * 32-bit doesn't have MMCRA but does have an MMCR2, + * and a few other names are different. + */ +#ifdef CONFIG_PPC32 + +#define MMCR0_FCHV 0 +#define MMCR0_PMCjCE MMCR0_PMCnCE + +#define SPRN_MMCRA SPRN_MMCR2 +#define MMCRA_SAMPLE_ENABLE 0 + +static inline unsigned long perf_ip_adjust(struct pt_regs *regs) +{ + return 0; +} +static inline void perf_set_pmu_inuse(int inuse) { } +static inline void perf_get_data_addr(struct pt_regs *regs, u64 *addrp) { } +static inline u32 perf_get_misc_flags(struct pt_regs *regs) +{ + return 0; +} +static inline void perf_read_regs(struct pt_regs *regs) { } +static inline int perf_intr_is_nmi(struct pt_regs *regs) +{ + return 0; +} + +#endif /* CONFIG_PPC32 */ + +/* + * Things that are specific to 64-bit implementations. + */ +#ifdef CONFIG_PPC64 + +static inline unsigned long perf_ip_adjust(struct pt_regs *regs) +{ + unsigned long mmcra = regs->dsisr; + + if ((mmcra & MMCRA_SAMPLE_ENABLE) && !(ppmu->flags & PPMU_ALT_SIPR)) { + unsigned long slot = (mmcra & MMCRA_SLOT) >> MMCRA_SLOT_SHIFT; + if (slot > 1) + return 4 * (slot - 1); + } + return 0; +} + +static inline void perf_set_pmu_inuse(int inuse) +{ + get_lppaca()->pmcregs_in_use = inuse; +} + +/* + * The user wants a data address recorded. + * If we're not doing instruction sampling, give them the SDAR + * (sampled data address). If we are doing instruction sampling, then + * only give them the SDAR if it corresponds to the instruction + * pointed to by SIAR; this is indicated by the [POWER6_]MMCRA_SDSYNC + * bit in MMCRA. + */ +static inline void perf_get_data_addr(struct pt_regs *regs, u64 *addrp) +{ + unsigned long mmcra = regs->dsisr; + unsigned long sdsync = (ppmu->flags & PPMU_ALT_SIPR) ? + POWER6_MMCRA_SDSYNC : MMCRA_SDSYNC; + + if (!(mmcra & MMCRA_SAMPLE_ENABLE) || (mmcra & sdsync)) + *addrp = mfspr(SPRN_SDAR); +} + +static inline u32 perf_get_misc_flags(struct pt_regs *regs) +{ + unsigned long mmcra = regs->dsisr; + + if (TRAP(regs) != 0xf00) + return 0; /* not a PMU interrupt */ + + if (ppmu->flags & PPMU_ALT_SIPR) { + if (mmcra & POWER6_MMCRA_SIHV) + return PERF_EVENT_MISC_HYPERVISOR; + return (mmcra & POWER6_MMCRA_SIPR) ? + PERF_EVENT_MISC_USER : PERF_EVENT_MISC_KERNEL; + } + if (mmcra & MMCRA_SIHV) + return PERF_EVENT_MISC_HYPERVISOR; + return (mmcra & MMCRA_SIPR) ? PERF_EVENT_MISC_USER : + PERF_EVENT_MISC_KERNEL; +} + +/* + * Overload regs->dsisr to store MMCRA so we only need to read it once + * on each interrupt. + */ +static inline void perf_read_regs(struct pt_regs *regs) +{ + regs->dsisr = mfspr(SPRN_MMCRA); +} + +/* + * If interrupts were soft-disabled when a PMU interrupt occurs, treat + * it as an NMI. + */ +static inline int perf_intr_is_nmi(struct pt_regs *regs) +{ + return !regs->softe; +} + +#endif /* CONFIG_PPC64 */ + static void perf_counter_interrupt(struct pt_regs *regs); void perf_counter_print_debug(void) @@ -78,12 +187,14 @@ static unsigned long read_pmc(int idx) case 6: val = mfspr(SPRN_PMC6); break; +#ifdef CONFIG_PPC64 case 7: val = mfspr(SPRN_PMC7); break; case 8: val = mfspr(SPRN_PMC8); break; +#endif /* CONFIG_PPC64 */ default: printk(KERN_ERR "oops trying to read PMC%d\n", idx); val = 0; @@ -115,12 +226,14 @@ static void write_pmc(int idx, unsigned long val) case 6: mtspr(SPRN_PMC6, val); break; +#ifdef CONFIG_PPC64 case 7: mtspr(SPRN_PMC7, val); break; case 8: mtspr(SPRN_PMC8, val); break; +#endif /* CONFIG_PPC64 */ default: printk(KERN_ERR "oops trying to write PMC%d\n", idx); } @@ -283,7 +396,7 @@ static int check_excludes(struct perf_counter **ctrs, unsigned int cflags[], static void power_pmu_read(struct perf_counter *counter) { - long val, delta, prev; + s64 val, delta, prev; if (!counter->hw.idx) return; @@ -477,7 +590,7 @@ void hw_perf_enable(void) mtspr(SPRN_MMCRA, cpuhw->mmcr[2] & ~MMCRA_SAMPLE_ENABLE); mtspr(SPRN_MMCR1, cpuhw->mmcr[1]); if (cpuhw->n_counters == 0) - get_lppaca()->pmcregs_in_use = 0; + perf_set_pmu_inuse(0); goto out_enable; } @@ -510,7 +623,7 @@ void hw_perf_enable(void) * bit set and set the hardware counters to their initial values. * Then unfreeze the counters. */ - get_lppaca()->pmcregs_in_use = 1; + perf_set_pmu_inuse(1); mtspr(SPRN_MMCRA, cpuhw->mmcr[2] & ~MMCRA_SAMPLE_ENABLE); mtspr(SPRN_MMCR1, cpuhw->mmcr[1]); mtspr(SPRN_MMCR0, (cpuhw->mmcr[0] & ~(MMCR0_PMC1CE | MMCR0_PMCjCE)) @@ -1007,11 +1120,10 @@ const struct pmu *hw_perf_counter_init(struct perf_counter *counter) * things if requested. Note that interrupts are hard-disabled * here so there is no possibility of being interrupted. */ -static void record_and_restart(struct perf_counter *counter, long val, +static void record_and_restart(struct perf_counter *counter, unsigned long val, struct pt_regs *regs, int nmi) { u64 period = counter->hw.sample_period; - unsigned long mmcra, sdsync; s64 prev, delta, left; int record = 0; @@ -1033,8 +1145,8 @@ static void record_and_restart(struct perf_counter *counter, long val, left = period; record = 1; } - if (left < 0x80000000L) - val = 0x80000000L - left; + if (left < 0x80000000LL) + val = 0x80000000LL - left; } /* @@ -1047,22 +1159,9 @@ static void record_and_restart(struct perf_counter *counter, long val, .period = counter->hw.last_period, }; - if (counter->attr.sample_type & PERF_SAMPLE_ADDR) { - /* - * The user wants a data address recorded. - * If we're not doing instruction sampling, - * give them the SDAR (sampled data address). - * If we are doing instruction sampling, then only - * give them the SDAR if it corresponds to the - * instruction pointed to by SIAR; this is indicated - * by the [POWER6_]MMCRA_SDSYNC bit in MMCRA. - */ - mmcra = regs->dsisr; - sdsync = (ppmu->flags & PPMU_ALT_SIPR) ? - POWER6_MMCRA_SDSYNC : MMCRA_SDSYNC; - if (!(mmcra & MMCRA_SAMPLE_ENABLE) || (mmcra & sdsync)) - data.addr = mfspr(SPRN_SDAR); - } + if (counter->attr.sample_type & PERF_SAMPLE_ADDR) + perf_get_data_addr(regs, &data.addr); + if (perf_counter_overflow(counter, nmi, &data)) { /* * Interrupts are coming too fast - throttle them @@ -1088,25 +1187,12 @@ static void record_and_restart(struct perf_counter *counter, long val, */ unsigned long perf_misc_flags(struct pt_regs *regs) { - unsigned long mmcra; + u32 flags = perf_get_misc_flags(regs); - if (TRAP(regs) != 0xf00) { - /* not a PMU interrupt */ - return user_mode(regs) ? PERF_EVENT_MISC_USER : - PERF_EVENT_MISC_KERNEL; - } - - mmcra = regs->dsisr; - if (ppmu->flags & PPMU_ALT_SIPR) { - if (mmcra & POWER6_MMCRA_SIHV) - return PERF_EVENT_MISC_HYPERVISOR; - return (mmcra & POWER6_MMCRA_SIPR) ? PERF_EVENT_MISC_USER : - PERF_EVENT_MISC_KERNEL; - } - if (mmcra & MMCRA_SIHV) - return PERF_EVENT_MISC_HYPERVISOR; - return (mmcra & MMCRA_SIPR) ? PERF_EVENT_MISC_USER : - PERF_EVENT_MISC_KERNEL; + if (flags) + return flags; + return user_mode(regs) ? PERF_EVENT_MISC_USER : + PERF_EVENT_MISC_KERNEL; } /* @@ -1115,20 +1201,12 @@ unsigned long perf_misc_flags(struct pt_regs *regs) */ unsigned long perf_instruction_pointer(struct pt_regs *regs) { - unsigned long mmcra; unsigned long ip; - unsigned long slot; if (TRAP(regs) != 0xf00) return regs->nip; /* not a PMU interrupt */ - ip = mfspr(SPRN_SIAR); - mmcra = regs->dsisr; - if ((mmcra & MMCRA_SAMPLE_ENABLE) && !(ppmu->flags & PPMU_ALT_SIPR)) { - slot = (mmcra & MMCRA_SLOT) >> MMCRA_SLOT_SHIFT; - if (slot > 1) - ip += 4 * (slot - 1); - } + ip = mfspr(SPRN_SIAR) + perf_ip_adjust(regs); return ip; } @@ -1140,7 +1218,7 @@ static void perf_counter_interrupt(struct pt_regs *regs) int i; struct cpu_hw_counters *cpuhw = &__get_cpu_var(cpu_hw_counters); struct perf_counter *counter; - long val; + unsigned long val; int found = 0; int nmi; @@ -1148,16 +1226,9 @@ static void perf_counter_interrupt(struct pt_regs *regs) freeze_limited_counters(cpuhw, mfspr(SPRN_PMC5), mfspr(SPRN_PMC6)); - /* - * Overload regs->dsisr to store MMCRA so we only need to read it once. - */ - regs->dsisr = mfspr(SPRN_MMCRA); + perf_read_regs(regs); - /* - * If interrupts were soft-disabled when this PMU interrupt - * occurred, treat it as an NMI. - */ - nmi = !regs->softe; + nmi = perf_intr_is_nmi(regs); if (nmi) nmi_enter(); else @@ -1223,11 +1294,13 @@ int register_power_pmu(struct power_pmu *pmu) pr_info("%s performance monitor hardware support registered\n", pmu->name); +#ifdef MSR_HV /* * Use FCHV to ignore kernel events if MSR.HV is set. */ if (mfmsr() & MSR_HV) freeze_counters_kernel = MMCR0_FCHV; +#endif /* CONFIG_PPC64 */ return 0; } -- cgit v1.1 From 7325927e5a20bfe0f006acf92801bf41c537d3d4 Mon Sep 17 00:00:00 2001 From: Paul Mackerras <paulus@samba.org> Date: Wed, 17 Jun 2009 21:53:51 +1000 Subject: perf_counter: powerpc: Add processor back-end for MPC7450 family This adds support for the performance monitor hardware on the MPC7450 family of processors (7450, 7451, 7455, 7447/7457, 7447A, 7448), used in the later Apple G4 powermacs/powerbooks and other machines. These machines have 6 hardware counters with a unique set of events which can be counted on each counter, with some events being available on multiple counters. Raw event codes for these processors are (PMC << 8) + PMCSEL. If PMC is non-zero then the event is that selected by the given PMCSEL value for that PMC (hardware counter). If PMC is zero then the event selected is one of the low-numbered ones that are common to several PMCs. In this case PMCSEL must be <= 22 and the event is what that PMCSEL value would select on PMC1 (but it may be placed any other PMC that has the same event for that PMCSEL value). For events that count cycles or occurrences that exceed a threshold, the threshold requested can be specified in the 0x3f000 bits of the raw event codes. If the event uses the threshold multiplier bit and that bit should be set, that is indicated with the 0x40000 bit of the raw event code. This fills in some of the generic cache events. Unfortunately there are quite a few blank spaces in the table, partly because these processors tend to count cache hits rather than cache accesses. Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: linuxppc-dev@ozlabs.org Cc: benh@kernel.crashing.org LKML-Reference: <19000.55631.802122.696927@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/powerpc/kernel/Makefile | 2 + arch/powerpc/kernel/mpc7450-pmu.c | 417 +++++++++++++++++++++++++++++++++ arch/powerpc/platforms/Kconfig.cputype | 1 + 3 files changed, 420 insertions(+) create mode 100644 arch/powerpc/kernel/mpc7450-pmu.c (limited to 'arch') diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index c5f93f0..a9f8829 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -98,6 +98,7 @@ obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o obj-$(CONFIG_PPC_PERF_CTRS) += perf_counter.o obj64-$(CONFIG_PPC_PERF_CTRS) += power4-pmu.o ppc970-pmu.o power5-pmu.o \ power5+-pmu.o power6-pmu.o power7-pmu.o +obj32-$(CONFIG_PPC_PERF_CTRS) += mpc7450-pmu.o obj-$(CONFIG_8XX_MINIMAL_FPEMU) += softemu8xx.o @@ -106,6 +107,7 @@ obj-y += iomap.o endif obj-$(CONFIG_PPC64) += $(obj64-y) +obj-$(CONFIG_PPC32) += $(obj32-y) ifneq ($(CONFIG_XMON)$(CONFIG_KEXEC),) obj-y += ppc_save_regs.o diff --git a/arch/powerpc/kernel/mpc7450-pmu.c b/arch/powerpc/kernel/mpc7450-pmu.c new file mode 100644 index 0000000..75ff47f --- /dev/null +++ b/arch/powerpc/kernel/mpc7450-pmu.c @@ -0,0 +1,417 @@ +/* + * Performance counter support for MPC7450-family processors. + * + * Copyright 2008-2009 Paul Mackerras, IBM Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include <linux/string.h> +#include <linux/perf_counter.h> +#include <linux/string.h> +#include <asm/reg.h> +#include <asm/cputable.h> + +#define N_COUNTER 6 /* Number of hardware counters */ +#define MAX_ALT 3 /* Maximum number of event alternative codes */ + +/* + * Bits in event code for MPC7450 family + */ +#define PM_THRMULT_MSKS 0x40000 +#define PM_THRESH_SH 12 +#define PM_THRESH_MSK 0x3f +#define PM_PMC_SH 8 +#define PM_PMC_MSK 7 +#define PM_PMCSEL_MSK 0x7f + +/* + * Classify events according to how specific their PMC requirements are. + * Result is: + * 0: can go on any PMC + * 1: can go on PMCs 1-4 + * 2: can go on PMCs 1,2,4 + * 3: can go on PMCs 1 or 2 + * 4: can only go on one PMC + * -1: event code is invalid + */ +#define N_CLASSES 5 + +static int mpc7450_classify_event(u32 event) +{ + int pmc; + + pmc = (event >> PM_PMC_SH) & PM_PMC_MSK; + if (pmc) { + if (pmc > N_COUNTER) + return -1; + return 4; + } + event &= PM_PMCSEL_MSK; + if (event <= 1) + return 0; + if (event <= 7) + return 1; + if (event <= 13) + return 2; + if (event <= 22) + return 3; + return -1; +} + +/* + * Events using threshold and possible threshold scale: + * code scale? name + * 11e N PM_INSTQ_EXCEED_CYC + * 11f N PM_ALTV_IQ_EXCEED_CYC + * 128 Y PM_DTLB_SEARCH_EXCEED_CYC + * 12b Y PM_LD_MISS_EXCEED_L1_CYC + * 220 N PM_CQ_EXCEED_CYC + * 30c N PM_GPR_RB_EXCEED_CYC + * 30d ? PM_FPR_IQ_EXCEED_CYC ? + * 311 Y PM_ITLB_SEARCH_EXCEED + * 410 N PM_GPR_IQ_EXCEED_CYC + */ + +/* + * Return use of threshold and threshold scale bits: + * 0 = uses neither, 1 = uses threshold, 2 = uses both + */ +static int mpc7450_threshold_use(u32 event) +{ + int pmc, sel; + + pmc = (event >> PM_PMC_SH) & PM_PMC_MSK; + sel = event & PM_PMCSEL_MSK; + switch (pmc) { + case 1: + if (sel == 0x1e || sel == 0x1f) + return 1; + if (sel == 0x28 || sel == 0x2b) + return 2; + break; + case 2: + if (sel == 0x20) + return 1; + break; + case 3: + if (sel == 0xc || sel == 0xd) + return 1; + if (sel == 0x11) + return 2; + break; + case 4: + if (sel == 0x10) + return 1; + break; + } + return 0; +} + +/* + * Layout of constraint bits: + * 33222222222211111111110000000000 + * 10987654321098765432109876543210 + * |< >< > < > < ><><><><><><> + * TS TV G4 G3 G2P6P5P4P3P2P1 + * + * P1 - P6 + * 0 - 11: Count of events needing PMC1 .. PMC6 + * + * G2 + * 12 - 14: Count of events needing PMC1 or PMC2 + * + * G3 + * 16 - 18: Count of events needing PMC1, PMC2 or PMC4 + * + * G4 + * 20 - 23: Count of events needing PMC1, PMC2, PMC3 or PMC4 + * + * TV + * 24 - 29: Threshold value requested + * + * TS + * 30: Threshold scale value requested + */ + +static u32 pmcbits[N_COUNTER][2] = { + { 0x00844002, 0x00111001 }, /* PMC1 mask, value: P1,G2,G3,G4 */ + { 0x00844008, 0x00111004 }, /* PMC2: P2,G2,G3,G4 */ + { 0x00800020, 0x00100010 }, /* PMC3: P3,G4 */ + { 0x00840080, 0x00110040 }, /* PMC4: P4,G3,G4 */ + { 0x00000200, 0x00000100 }, /* PMC5: P5 */ + { 0x00000800, 0x00000400 } /* PMC6: P6 */ +}; + +static u32 classbits[N_CLASSES - 1][2] = { + { 0x00000000, 0x00000000 }, /* class 0: no constraint */ + { 0x00800000, 0x00100000 }, /* class 1: G4 */ + { 0x00040000, 0x00010000 }, /* class 2: G3 */ + { 0x00004000, 0x00001000 }, /* class 3: G2 */ +}; + +static int mpc7450_get_constraint(u64 event, unsigned long *maskp, + unsigned long *valp) +{ + int pmc, class; + u32 mask, value; + int thresh, tuse; + + class = mpc7450_classify_event(event); + if (class < 0) + return -1; + if (class == 4) { + pmc = ((unsigned int)event >> PM_PMC_SH) & PM_PMC_MSK; + mask = pmcbits[pmc - 1][0]; + value = pmcbits[pmc - 1][1]; + } else { + mask = classbits[class][0]; + value = classbits[class][1]; + } + + tuse = mpc7450_threshold_use(event); + if (tuse) { + thresh = ((unsigned int)event >> PM_THRESH_SH) & PM_THRESH_MSK; + mask |= 0x3f << 24; + value |= thresh << 24; + if (tuse == 2) { + mask |= 0x40000000; + if ((unsigned int)event & PM_THRMULT_MSKS) + value |= 0x40000000; + } + } + + *maskp = mask; + *valp = value; + return 0; +} + +static const unsigned int event_alternatives[][MAX_ALT] = { + { 0x217, 0x317 }, /* PM_L1_DCACHE_MISS */ + { 0x418, 0x50f, 0x60f }, /* PM_SNOOP_RETRY */ + { 0x502, 0x602 }, /* PM_L2_HIT */ + { 0x503, 0x603 }, /* PM_L3_HIT */ + { 0x504, 0x604 }, /* PM_L2_ICACHE_MISS */ + { 0x505, 0x605 }, /* PM_L3_ICACHE_MISS */ + { 0x506, 0x606 }, /* PM_L2_DCACHE_MISS */ + { 0x507, 0x607 }, /* PM_L3_DCACHE_MISS */ + { 0x50a, 0x623 }, /* PM_LD_HIT_L3 */ + { 0x50b, 0x624 }, /* PM_ST_HIT_L3 */ + { 0x50d, 0x60d }, /* PM_L2_TOUCH_HIT */ + { 0x50e, 0x60e }, /* PM_L3_TOUCH_HIT */ + { 0x512, 0x612 }, /* PM_INT_LOCAL */ + { 0x513, 0x61d }, /* PM_L2_MISS */ + { 0x514, 0x61e }, /* PM_L3_MISS */ +}; + +/* + * Scan the alternatives table for a match and return the + * index into the alternatives table if found, else -1. + */ +static int find_alternative(u32 event) +{ + int i, j; + + for (i = 0; i < ARRAY_SIZE(event_alternatives); ++i) { + if (event < event_alternatives[i][0]) + break; + for (j = 0; j < MAX_ALT && event_alternatives[i][j]; ++j) + if (event == event_alternatives[i][j]) + return i; + } + return -1; +} + +static int mpc7450_get_alternatives(u64 event, unsigned int flags, u64 alt[]) +{ + int i, j, nalt = 1; + u32 ae; + + alt[0] = event; + nalt = 1; + i = find_alternative((u32)event); + if (i >= 0) { + for (j = 0; j < MAX_ALT; ++j) { + ae = event_alternatives[i][j]; + if (ae && ae != (u32)event) + alt[nalt++] = ae; + } + } + return nalt; +} + +/* + * Bitmaps of which PMCs each class can use for classes 0 - 3. + * Bit i is set if PMC i+1 is usable. + */ +static const u8 classmap[N_CLASSES] = { + 0x3f, 0x0f, 0x0b, 0x03, 0 +}; + +/* Bit position and width of each PMCSEL field */ +static const int pmcsel_shift[N_COUNTER] = { + 6, 0, 27, 22, 17, 11 +}; +static const u32 pmcsel_mask[N_COUNTER] = { + 0x7f, 0x3f, 0x1f, 0x1f, 0x1f, 0x3f +}; + +/* + * Compute MMCR0/1/2 values for a set of events. + */ +static int mpc7450_compute_mmcr(u64 event[], int n_ev, + unsigned int hwc[], unsigned long mmcr[]) +{ + u8 event_index[N_CLASSES][N_COUNTER]; + int n_classevent[N_CLASSES]; + int i, j, class, tuse; + u32 pmc_inuse = 0, pmc_avail; + u32 mmcr0 = 0, mmcr1 = 0, mmcr2 = 0; + u32 ev, pmc, thresh; + + if (n_ev > N_COUNTER) + return -1; + + /* First pass: count usage in each class */ + for (i = 0; i < N_CLASSES; ++i) + n_classevent[i] = 0; + for (i = 0; i < n_ev; ++i) { + class = mpc7450_classify_event(event[i]); + if (class < 0) + return -1; + j = n_classevent[class]++; + event_index[class][j] = i; + } + + /* Second pass: allocate PMCs from most specific event to least */ + for (class = N_CLASSES - 1; class >= 0; --class) { + for (i = 0; i < n_classevent[class]; ++i) { + ev = event[event_index[class][i]]; + if (class == 4) { + pmc = (ev >> PM_PMC_SH) & PM_PMC_MSK; + if (pmc_inuse & (1 << (pmc - 1))) + return -1; + } else { + /* Find a suitable PMC */ + pmc_avail = classmap[class] & ~pmc_inuse; + if (!pmc_avail) + return -1; + pmc = ffs(pmc_avail); + } + pmc_inuse |= 1 << (pmc - 1); + + tuse = mpc7450_threshold_use(ev); + if (tuse) { + thresh = (ev >> PM_THRESH_SH) & PM_THRESH_MSK; + mmcr0 |= thresh << 16; + if (tuse == 2 && (ev & PM_THRMULT_MSKS)) + mmcr2 = 0x80000000; + } + ev &= pmcsel_mask[pmc - 1]; + ev <<= pmcsel_shift[pmc - 1]; + if (pmc <= 2) + mmcr0 |= ev; + else + mmcr1 |= ev; + hwc[event_index[class][i]] = pmc - 1; + } + } + + if (pmc_inuse & 1) + mmcr0 |= MMCR0_PMC1CE; + if (pmc_inuse & 0x3e) + mmcr0 |= MMCR0_PMCnCE; + + /* Return MMCRx values */ + mmcr[0] = mmcr0; + mmcr[1] = mmcr1; + mmcr[2] = mmcr2; + return 0; +} + +/* + * Disable counting by a PMC. + * Note that the pmc argument is 0-based here, not 1-based. + */ +static void mpc7450_disable_pmc(unsigned int pmc, unsigned long mmcr[]) +{ + if (pmc <= 1) + mmcr[0] &= ~(pmcsel_mask[pmc] << pmcsel_shift[pmc]); + else + mmcr[1] &= ~(pmcsel_mask[pmc] << pmcsel_shift[pmc]); +} + +static int mpc7450_generic_events[] = { + [PERF_COUNT_HW_CPU_CYCLES] = 1, + [PERF_COUNT_HW_INSTRUCTIONS] = 2, + [PERF_COUNT_HW_CACHE_MISSES] = 0x217, /* PM_L1_DCACHE_MISS */ + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x122, /* PM_BR_CMPL */ + [PERF_COUNT_HW_BRANCH_MISSES] = 0x41c, /* PM_BR_MPRED */ +}; + +#define C(x) PERF_COUNT_HW_CACHE_##x + +/* + * Table of generalized cache-related events. + * 0 means not supported, -1 means nonsensical, other values + * are event codes. + */ +static int mpc7450_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = { + [C(L1D)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0, 0x225 }, + [C(OP_WRITE)] = { 0, 0x227 }, + [C(OP_PREFETCH)] = { 0, 0 }, + }, + [C(L1I)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0x129, 0x115 }, + [C(OP_WRITE)] = { -1, -1 }, + [C(OP_PREFETCH)] = { 0x634, 0 }, + }, + [C(LL)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0, 0 }, + [C(OP_WRITE)] = { 0, 0 }, + [C(OP_PREFETCH)] = { 0, 0 }, + }, + [C(DTLB)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0, 0x312 }, + [C(OP_WRITE)] = { -1, -1 }, + [C(OP_PREFETCH)] = { -1, -1 }, + }, + [C(ITLB)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0, 0x223 }, + [C(OP_WRITE)] = { -1, -1 }, + [C(OP_PREFETCH)] = { -1, -1 }, + }, + [C(BPU)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0x122, 0x41c }, + [C(OP_WRITE)] = { -1, -1 }, + [C(OP_PREFETCH)] = { -1, -1 }, + }, +}; + +struct power_pmu mpc7450_pmu = { + .name = "MPC7450 family", + .n_counter = N_COUNTER, + .max_alternatives = MAX_ALT, + .add_fields = 0x00111555ul, + .test_adder = 0x00301000ul, + .compute_mmcr = mpc7450_compute_mmcr, + .get_constraint = mpc7450_get_constraint, + .get_alternatives = mpc7450_get_alternatives, + .disable_pmc = mpc7450_disable_pmc, + .n_generic = ARRAY_SIZE(mpc7450_generic_events), + .generic_events = mpc7450_generic_events, + .cache_events = &mpc7450_cache_events, +}; + +static int init_mpc7450_pmu(void) +{ + if (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc/7450")) + return -ENODEV; + + return register_power_pmu(&mpc7450_pmu); +} + +arch_initcall(init_mpc7450_pmu); diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype index dd9f3ec..8485c8c 100644 --- a/arch/powerpc/platforms/Kconfig.cputype +++ b/arch/powerpc/platforms/Kconfig.cputype @@ -75,6 +75,7 @@ config POWER4_ONLY config 6xx def_bool y depends on PPC32 && PPC_BOOK3S + select PPC_HAVE_PMU_SUPPORT config POWER3 bool -- cgit v1.1 From 944557116908cbe835be41bfbd39d9706da9fd71 Mon Sep 17 00:00:00 2001 From: Matt Fleming <matt@console-pimps.org> Date: Thu, 18 Jun 2009 10:03:33 +0100 Subject: sh: Fix declaration of __kernel_sigreturn and __kernel_rt_sigreturn GCC 4.5.0 complains about the declaration of variables __kernel_sigreturn and __kernel_rt_sigreturn because they have type void. Correctly declare these symbols as functions to fix the following error, arch/sh/kernel/signal_32.c: In function 'setup_frame': arch/sh/kernel/signal_32.c:368:14: error: taking address of expression of type 'void' arch/sh/kernel/signal_32.c: In function 'setup_rt_frame': arch/sh/kernel/signal_32.c:452:14: error: taking address of expression of type 'void' make[1]: *** [arch/sh/kernel/signal_32.o] Error 1 make: *** [arch/sh/kernel] Error 2 Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/kernel/signal_32.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/sh/kernel/signal_32.c b/arch/sh/kernel/signal_32.c index 17784e1..b5afbec 100644 --- a/arch/sh/kernel/signal_32.c +++ b/arch/sh/kernel/signal_32.c @@ -332,8 +332,8 @@ get_sigframe(struct k_sigaction *ka, unsigned long sp, size_t frame_size) /* These symbols are defined with the addresses in the vsyscall page. See vsyscall-trapa.S. */ -extern void __user __kernel_sigreturn; -extern void __user __kernel_rt_sigreturn; +extern void __kernel_sigreturn(void); +extern void __kernel_rt_sigreturn(void); static int setup_frame(int sig, struct k_sigaction *ka, sigset_t *set, struct pt_regs *regs) -- cgit v1.1 From e6efaa025384f86a18814a6b9f4e5d54484ab9ff Mon Sep 17 00:00:00 2001 From: Huang Ying <ying.huang@intel.com> Date: Thu, 18 Jun 2009 19:33:57 +0800 Subject: crypto: aes-ni - Fix cbc mode IV saving Original implementation of aesni_cbc_dec do not save IV if input length % 4 == 0. This will make decryption of next block failed. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> --- arch/x86/crypto/aesni-intel_asm.S | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/crypto/aesni-intel_asm.S b/arch/x86/crypto/aesni-intel_asm.S index caba996..eb0566e 100644 --- a/arch/x86/crypto/aesni-intel_asm.S +++ b/arch/x86/crypto/aesni-intel_asm.S @@ -845,7 +845,7 @@ ENTRY(aesni_cbc_enc) */ ENTRY(aesni_cbc_dec) cmp $16, LEN - jb .Lcbc_dec_ret + jb .Lcbc_dec_just_ret mov 480(KEYP), KLEN add $240, KEYP movups (IVP), IV @@ -891,6 +891,7 @@ ENTRY(aesni_cbc_dec) add $16, OUTP cmp $16, LEN jge .Lcbc_dec_loop1 - movups IV, (IVP) .Lcbc_dec_ret: + movups IV, (IVP) +.Lcbc_dec_just_ret: ret -- cgit v1.1 From 9251b64fb2d2326d28f0e0646a9e4fb8bbb51d8e Mon Sep 17 00:00:00 2001 From: Huang Ying <ying.huang@intel.com> Date: Thu, 18 Jun 2009 19:41:27 +0800 Subject: crypto: aes-ni - Do not sleep when using the FPU Because AES-NI instructions will touch XMM state, corresponding code must be enclosed within kernel_fpu_begin/end, which used preempt_disable/enable. So sleep should be prevented between kernel_fpu_begin/end. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> --- arch/x86/crypto/aesni-intel_glue.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/x86/crypto/aesni-intel_glue.c b/arch/x86/crypto/aesni-intel_glue.c index 4e66339..c580c5e 100644 --- a/arch/x86/crypto/aesni-intel_glue.c +++ b/arch/x86/crypto/aesni-intel_glue.c @@ -198,6 +198,7 @@ static int ecb_encrypt(struct blkcipher_desc *desc, blkcipher_walk_init(&walk, dst, src, nbytes); err = blkcipher_walk_virt(desc, &walk); + desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP; kernel_fpu_begin(); while ((nbytes = walk.nbytes)) { @@ -221,6 +222,7 @@ static int ecb_decrypt(struct blkcipher_desc *desc, blkcipher_walk_init(&walk, dst, src, nbytes); err = blkcipher_walk_virt(desc, &walk); + desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP; kernel_fpu_begin(); while ((nbytes = walk.nbytes)) { @@ -266,6 +268,7 @@ static int cbc_encrypt(struct blkcipher_desc *desc, blkcipher_walk_init(&walk, dst, src, nbytes); err = blkcipher_walk_virt(desc, &walk); + desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP; kernel_fpu_begin(); while ((nbytes = walk.nbytes)) { @@ -289,6 +292,7 @@ static int cbc_decrypt(struct blkcipher_desc *desc, blkcipher_walk_init(&walk, dst, src, nbytes); err = blkcipher_walk_virt(desc, &walk); + desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP; kernel_fpu_begin(); while ((nbytes = walk.nbytes)) { -- cgit v1.1 From b6f34d44cb341ad32f08717d1a2c418e6053a031 Mon Sep 17 00:00:00 2001 From: Huang Ying <ying.huang@intel.com> Date: Thu, 18 Jun 2009 19:44:01 +0800 Subject: crypto: aes-ni - Remove CRYPTO_TFM_REQ_MAY_SLEEP from fpu template kernel_fpu_begin/end used preempt_disable/enable, so sleep should be prevented between kernel_fpu_begin/end. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> --- arch/x86/crypto/fpu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/crypto/fpu.c b/arch/x86/crypto/fpu.c index 5f9781a..daef6cd 100644 --- a/arch/x86/crypto/fpu.c +++ b/arch/x86/crypto/fpu.c @@ -48,7 +48,7 @@ static int crypto_fpu_encrypt(struct blkcipher_desc *desc_in, struct blkcipher_desc desc = { .tfm = child, .info = desc_in->info, - .flags = desc_in->flags, + .flags = desc_in->flags & ~CRYPTO_TFM_REQ_MAY_SLEEP, }; kernel_fpu_begin(); @@ -67,7 +67,7 @@ static int crypto_fpu_decrypt(struct blkcipher_desc *desc_in, struct blkcipher_desc desc = { .tfm = child, .info = desc_in->info, - .flags = desc_in->flags, + .flags = desc_in->flags & ~CRYPTO_TFM_REQ_MAY_SLEEP, }; kernel_fpu_begin(); -- cgit v1.1 From b1f49f9582f9be6de5055cfa97eabf6246f2eaf7 Mon Sep 17 00:00:00 2001 From: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Date: Thu, 18 Jun 2009 14:53:24 +0900 Subject: x86, mce: fix error path in mce_create_device() Don't skip removing mce_attrs in route from error2. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Huang Ying <ying.huang@intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> --- arch/x86/kernel/cpu/mcheck/mce.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index c2fb70d..284d1de 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -1798,7 +1798,7 @@ static cpumask_var_t mce_dev_initialized; static __cpuinit int mce_create_device(unsigned int cpu) { int err; - int i; + int i, j; if (!mce_available(&boot_cpu_data)) return -EIO; @@ -1816,9 +1816,9 @@ static __cpuinit int mce_create_device(unsigned int cpu) if (err) goto error; } - for (i = 0; i < banks; i++) { + for (j = 0; j < banks; j++) { err = sysdev_create_file(&per_cpu(mce_dev, cpu), - &bank_attrs[i]); + &bank_attrs[j]); if (err) goto error2; } @@ -1826,8 +1826,8 @@ static __cpuinit int mce_create_device(unsigned int cpu) return 0; error2: - while (--i >= 0) - sysdev_remove_file(&per_cpu(mce_dev, cpu), &bank_attrs[i]); + while (--j >= 0) + sysdev_remove_file(&per_cpu(mce_dev, cpu), &bank_attrs[j]); error: while (--i >= 0) sysdev_remove_file(&per_cpu(mce_dev, cpu), mce_attrs[i]); -- cgit v1.1 From 02e787494ada6026074189c5268b88b7ca5cd595 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov <oleg@redhat.com> Date: Wed, 17 Jun 2009 16:27:23 -0700 Subject: ptrace: remove PT_DTRACE from arch/h8300 h8300 defines PT_DTRACE for asm but never uses it. DEFINE(PT_PTRACED, PT_PTRACED) seems to be unused too. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Yoshinori Sato <ysato@users.sourceforge.jp> Acked-by: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> --- arch/h8300/kernel/asm-offsets.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/h8300/kernel/asm-offsets.c b/arch/h8300/kernel/asm-offsets.c index 2042552..fd961e0 100644 --- a/arch/h8300/kernel/asm-offsets.c +++ b/arch/h8300/kernel/asm-offsets.c @@ -55,7 +55,6 @@ int main(void) DEFINE(LRET, offsetof(struct pt_regs, pc) - sizeof(long)); DEFINE(PT_PTRACED, PT_PTRACED); - DEFINE(PT_DTRACE, PT_DTRACE); return 0; } -- cgit v1.1 From bba7fc0a21d76ef951cdac6d11896dc6b5a9ffa7 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov <oleg@redhat.com> Date: Wed, 17 Jun 2009 16:27:25 -0700 Subject: ptrace: remove PT_DTRACE from avr32, mn10300, parisc, s390, sh, xtensa avr32, mn10300, parisc, s390, sh, xtensa: They never set PT_DTRACE, but clear it after do_execve(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: David Howells <dhowells@redhat.com> Acked-by: Kyle McMartin <kyle@mcmartin.ca> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: Matthew Wilcox <matthew@wil.cx> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Chris Zankel <chris@zankel.net> Acked-by: Roland McGrath <roland@redhat.com> Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> --- arch/avr32/kernel/process.c | 2 -- arch/mn10300/kernel/process.c | 3 --- arch/parisc/hpux/fs.c | 5 ----- arch/parisc/kernel/process.c | 5 ----- arch/parisc/kernel/sys_parisc32.c | 5 ----- arch/s390/kernel/compat_linux.c | 3 --- arch/s390/kernel/process.c | 3 --- arch/sh/kernel/process_32.c | 5 ----- arch/sh/kernel/process_64.c | 5 ----- arch/xtensa/kernel/process.c | 5 ----- 10 files changed, 41 deletions(-) (limited to 'arch') diff --git a/arch/avr32/kernel/process.c b/arch/avr32/kernel/process.c index 1bbe1da..93c0342 100644 --- a/arch/avr32/kernel/process.c +++ b/arch/avr32/kernel/process.c @@ -394,8 +394,6 @@ asmlinkage int sys_execve(char __user *ufilename, char __user *__user *uargv, goto out; error = do_execve(filename, uargv, uenvp, regs); - if (error == 0) - current->ptrace &= ~PT_DTRACE; putname(filename); out: diff --git a/arch/mn10300/kernel/process.c b/arch/mn10300/kernel/process.c index 234cf34..892cce8 100644 --- a/arch/mn10300/kernel/process.c +++ b/arch/mn10300/kernel/process.c @@ -281,9 +281,6 @@ asmlinkage long sys_execve(char __user *name, error = PTR_ERR(filename); if (!IS_ERR(filename)) { error = do_execve(filename, argv, envp, __frame); - if (error == 0) - current->ptrace &= ~PT_DTRACE; - putname(filename); } diff --git a/arch/parisc/hpux/fs.c b/arch/parisc/hpux/fs.c index 5cbe9f9..5407536 100644 --- a/arch/parisc/hpux/fs.c +++ b/arch/parisc/hpux/fs.c @@ -44,11 +44,6 @@ int hpux_execve(struct pt_regs *regs) error = do_execve(filename, (char __user * __user *) regs->gr[25], (char __user * __user *) regs->gr[24], regs); - if (error == 0) { - task_lock(current); - current->ptrace &= ~PT_DTRACE; - task_unlock(current); - } putname(filename); out: diff --git a/arch/parisc/kernel/process.c b/arch/parisc/kernel/process.c index 6f69101..61c0707 100644 --- a/arch/parisc/kernel/process.c +++ b/arch/parisc/kernel/process.c @@ -349,11 +349,6 @@ asmlinkage int sys_execve(struct pt_regs *regs) goto out; error = do_execve(filename, (char __user * __user *) regs->gr[25], (char __user * __user *) regs->gr[24], regs); - if (error == 0) { - task_lock(current); - current->ptrace &= ~PT_DTRACE; - task_unlock(current); - } putname(filename); out: diff --git a/arch/parisc/kernel/sys_parisc32.c b/arch/parisc/kernel/sys_parisc32.c index 0838155..1adb40c 100644 --- a/arch/parisc/kernel/sys_parisc32.c +++ b/arch/parisc/kernel/sys_parisc32.c @@ -77,11 +77,6 @@ asmlinkage int sys32_execve(struct pt_regs *regs) goto out; error = compat_do_execve(filename, compat_ptr(regs->gr[25]), compat_ptr(regs->gr[24]), regs); - if (error == 0) { - task_lock(current); - current->ptrace &= ~PT_DTRACE; - task_unlock(current); - } putname(filename); out: diff --git a/arch/s390/kernel/compat_linux.c b/arch/s390/kernel/compat_linux.c index 002c70d..9ab188d 100644 --- a/arch/s390/kernel/compat_linux.c +++ b/arch/s390/kernel/compat_linux.c @@ -461,9 +461,6 @@ asmlinkage long sys32_execve(void) result = rc; goto out_putname; } - task_lock(current); - current->ptrace &= ~PT_DTRACE; - task_unlock(current); current->thread.fp_regs.fpc=0; asm volatile("sfpc %0,0" : : "d" (0)); result = regs->gprs[2]; diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c index 355f7a3..5a43f27 100644 --- a/arch/s390/kernel/process.c +++ b/arch/s390/kernel/process.c @@ -266,9 +266,6 @@ SYSCALL_DEFINE0(vfork) asmlinkage void execve_tail(void) { - task_lock(current); - current->ptrace &= ~PT_DTRACE; - task_unlock(current); current->thread.fp_regs.fpc = 0; if (MACHINE_HAS_IEEE) asm volatile("sfpc %0,%0" : : "d" (0)); diff --git a/arch/sh/kernel/process_32.c b/arch/sh/kernel/process_32.c index 9289ede..601bbc0 100644 --- a/arch/sh/kernel/process_32.c +++ b/arch/sh/kernel/process_32.c @@ -367,11 +367,6 @@ asmlinkage int sys_execve(char __user *ufilename, char __user * __user *uargv, goto out; error = do_execve(filename, uargv, uenvp, regs); - if (error == 0) { - task_lock(current); - current->ptrace &= ~PT_DTRACE; - task_unlock(current); - } putname(filename); out: return error; diff --git a/arch/sh/kernel/process_64.c b/arch/sh/kernel/process_64.c index 96be839..3826773 100644 --- a/arch/sh/kernel/process_64.c +++ b/arch/sh/kernel/process_64.c @@ -529,11 +529,6 @@ asmlinkage int sys_execve(char *ufilename, char **uargv, (char __user * __user *)uargv, (char __user * __user *)uenvp, pregs); - if (error == 0) { - task_lock(current); - current->ptrace &= ~PT_DTRACE; - task_unlock(current); - } putname(filename); out: return error; diff --git a/arch/xtensa/kernel/process.c b/arch/xtensa/kernel/process.c index 031f366..e1a04a3 100644 --- a/arch/xtensa/kernel/process.c +++ b/arch/xtensa/kernel/process.c @@ -331,11 +331,6 @@ long xtensa_execve(char __user *name, char __user * __user *argv, if (IS_ERR(filename)) goto out; error = do_execve(filename, argv, envp, regs); - if (error == 0) { - task_lock(current); - current->ptrace &= ~PT_DTRACE; - task_unlock(current); - } putname(filename); out: return error; -- cgit v1.1 From 9d35f8464dd51466e60447625784cf1740f03ff4 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov <oleg@redhat.com> Date: Wed, 17 Jun 2009 16:27:27 -0700 Subject: ptrace: remove PT_DTRACE from m68k, m68knommu m68k sets PT_DTRACE in trap_c() but never uses it. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Greg Ungerer <gerg@snapgear.com> Cc: Roman Zippel <zippel@linux-m68k.org> Acked-by: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> --- arch/m68k/kernel/traps.c | 1 - arch/m68knommu/kernel/asm-offsets.c | 1 - arch/m68knommu/kernel/traps.c | 1 - 3 files changed, 3 deletions(-) (limited to 'arch') diff --git a/arch/m68k/kernel/traps.c b/arch/m68k/kernel/traps.c index 184acc9..aacd6d1 100644 --- a/arch/m68k/kernel/traps.c +++ b/arch/m68k/kernel/traps.c @@ -1057,7 +1057,6 @@ asmlinkage void trap_c(struct frame *fp) if (fp->ptregs.sr & PS_S) { if ((fp->ptregs.vector >> 2) == VEC_TRACE) { /* traced a trapping instruction */ - current->ptrace |= PT_DTRACE; } else bad_super_trap(fp); return; diff --git a/arch/m68knommu/kernel/asm-offsets.c b/arch/m68knommu/kernel/asm-offsets.c index f500dd6..594ee0e 100644 --- a/arch/m68knommu/kernel/asm-offsets.c +++ b/arch/m68knommu/kernel/asm-offsets.c @@ -73,7 +73,6 @@ int main(void) DEFINE(TRAP_TRACE, TRAP_TRACE); DEFINE(PT_PTRACED, PT_PTRACED); - DEFINE(PT_DTRACE, PT_DTRACE); DEFINE(THREAD_SIZE, THREAD_SIZE); diff --git a/arch/m68knommu/kernel/traps.c b/arch/m68knommu/kernel/traps.c index 5d5d56b..51d3253 100644 --- a/arch/m68knommu/kernel/traps.c +++ b/arch/m68knommu/kernel/traps.c @@ -200,7 +200,6 @@ asmlinkage void trap_c(struct frame *fp) if (fp->ptregs.sr & PS_S) { if ((fp->ptregs.vector >> 2) == VEC_TRACE) { /* traced a trapping instruction */ - current->ptrace |= PT_DTRACE; } else bad_super_trap(fp); return; -- cgit v1.1 From 48597760fad3d6a3e30a14241a3ce5ccb1a0e9bc Mon Sep 17 00:00:00 2001 From: Oleg Nesterov <oleg@redhat.com> Date: Wed, 17 Jun 2009 16:27:27 -0700 Subject: ptrace: remove PT_DTRACE from arch/m32r m32r: PTRACE_SINGLESTEP sets PT_DTRACE, it is never used except cleared after do_execve(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Hirokazu Takata <takata@linux-m32r.org> Acked-by: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> --- arch/m32r/kernel/process.c | 5 ----- arch/m32r/kernel/ptrace.c | 4 ---- 2 files changed, 9 deletions(-) (limited to 'arch') diff --git a/arch/m32r/kernel/process.c b/arch/m32r/kernel/process.c index 3e876f0..67a01e1 100644 --- a/arch/m32r/kernel/process.c +++ b/arch/m32r/kernel/process.c @@ -302,11 +302,6 @@ asmlinkage int sys_execve(char __user *ufilename, char __user * __user *uargv, goto out; error = do_execve(filename, uargv, uenvp, ®s); - if (error == 0) { - task_lock(current); - current->ptrace &= ~PT_DTRACE; - task_unlock(current); - } putname(filename); out: return error; diff --git a/arch/m32r/kernel/ptrace.c b/arch/m32r/kernel/ptrace.c index 9aa615d..bf0abe9 100644 --- a/arch/m32r/kernel/ptrace.c +++ b/arch/m32r/kernel/ptrace.c @@ -676,10 +676,6 @@ arch_ptrace(struct task_struct *child, long request, long addr, long data) if (!valid_signal(data)) break; clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); - if ((child->ptrace & PT_DTRACE) == 0) { - /* Spurious delayed TF traps may occur */ - child->ptrace |= PT_DTRACE; - } /* Compute next pc. */ pc = get_stack_long(child, PT_BPC); -- cgit v1.1 From 8f101a051ef054c33186abcd54b30a88afea47ef Mon Sep 17 00:00:00 2001 From: Harry Ciao <qingtao.cao@windriver.com> Date: Wed, 17 Jun 2009 16:28:00 -0700 Subject: edac: cpc925 MC platform device setup Fix up the number of cells for the values of CPC925 Memory Controller, and setup related platform device during system booting up, against which CPC925 Memory Controller EDAC driver would be matched. Signed-off-by: Harry Ciao <qingtao.cao@windriver.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Michael Ellerman <michael@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kumar Gala <galak@gate.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> --- arch/powerpc/kernel/prom_init.c | 40 ++++++++++++++++++++++++ arch/powerpc/platforms/maple/setup.c | 59 ++++++++++++++++++++++++++++++++++++ 2 files changed, 99 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index ef6f649..a538824 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -1947,8 +1947,47 @@ static void __init fixup_device_tree_maple(void) prom_setprop(isa, name, "ranges", isa_ranges, sizeof(isa_ranges)); } + +#define CPC925_MC_START 0xf8000000 +#define CPC925_MC_LENGTH 0x1000000 +/* The values for memory-controller don't have right number of cells */ +static void __init fixup_device_tree_maple_memory_controller(void) +{ + phandle mc; + u32 mc_reg[4]; + char *name = "/hostbridge@f8000000"; + struct prom_t *_prom = &RELOC(prom); + u32 ac, sc; + + mc = call_prom("finddevice", 1, 1, ADDR(name)); + if (!PHANDLE_VALID(mc)) + return; + + if (prom_getproplen(mc, "reg") != 8) + return; + + prom_getprop(_prom->root, "#address-cells", &ac, sizeof(ac)); + prom_getprop(_prom->root, "#size-cells", &sc, sizeof(sc)); + if ((ac != 2) || (sc != 2)) + return; + + if (prom_getprop(mc, "reg", mc_reg, sizeof(mc_reg)) == PROM_ERROR) + return; + + if (mc_reg[0] != CPC925_MC_START || mc_reg[1] != CPC925_MC_LENGTH) + return; + + prom_printf("Fixing up bogus hostbridge on Maple...\n"); + + mc_reg[0] = 0x0; + mc_reg[1] = CPC925_MC_START; + mc_reg[2] = 0x0; + mc_reg[3] = CPC925_MC_LENGTH; + prom_setprop(mc, name, "reg", mc_reg, sizeof(mc_reg)); +} #else #define fixup_device_tree_maple() +#define fixup_device_tree_maple_memory_controller() #endif #ifdef CONFIG_PPC_CHRP @@ -2189,6 +2228,7 @@ static void __init fixup_device_tree_efika(void) static void __init fixup_device_tree(void) { fixup_device_tree_maple(); + fixup_device_tree_maple_memory_controller(); fixup_device_tree_chrp(); fixup_device_tree_pmac(); fixup_device_tree_efika(); diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c index bfd60e4..0636a3d 100644 --- a/arch/powerpc/platforms/maple/setup.c +++ b/arch/powerpc/platforms/maple/setup.c @@ -335,3 +335,62 @@ define_machine(maple) { .progress = maple_progress, .power_save = power4_idle, }; + +#ifdef CONFIG_EDAC +/* + * Register a platform device for CPC925 memory controller on + * Motorola ATCA-6101 blade. + */ +#define MAPLE_CPC925_MODEL "Motorola,ATCA-6101" +static int __init maple_cpc925_edac_setup(void) +{ + struct platform_device *pdev; + struct device_node *np = NULL; + struct resource r; + const unsigned char *model; + int ret; + + np = of_find_node_by_path("/"); + if (!np) { + printk(KERN_ERR "%s: Unable to get root node\n", __func__); + return -ENODEV; + } + + model = (const unsigned char *)of_get_property(np, "model", NULL); + if (!model) { + printk(KERN_ERR "%s: Unabel to get model info\n", __func__); + return -ENODEV; + } + + ret = strcmp(model, MAPLE_CPC925_MODEL); + of_node_put(np); + + if (ret != 0) + return 0; + + np = of_find_node_by_type(NULL, "memory-controller"); + if (!np) { + printk(KERN_ERR "%s: Unable to find memory-controller node\n", + __func__); + return -ENODEV; + } + + ret = of_address_to_resource(np, 0, &r); + of_node_put(np); + + if (ret < 0) { + printk(KERN_ERR "%s: Unable to get memory-controller reg\n", + __func__); + return -ENODEV; + } + + pdev = platform_device_register_simple("cpc925_edac", 0, &r, 1); + if (IS_ERR(pdev)) + return PTR_ERR(pdev); + + printk(KERN_INFO "%s: CPC925 platform device created\n", __func__); + + return 0; +} +machine_device_initcall(maple, maple_cpc925_edac_setup); +#endif -- cgit v1.1 From 2521f2c228ad750701ba4702484e31d876dbc386 Mon Sep 17 00:00:00 2001 From: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Date: Wed, 17 Jun 2009 16:28:08 -0700 Subject: gcov: add gcov profiling infrastructure Enable the use of GCC's coverage testing tool gcov [1] with the Linux kernel. gcov may be useful for: * debugging (has this code been reached at all?) * test improvement (how do I change my test to cover these lines?) * minimizing kernel configurations (do I need this option if the associated code is never run?) The profiling patch incorporates the following changes: * change kbuild to include profiling flags * provide functions needed by profiling code * present profiling data as files in debugfs Note that on some architectures, enabling gcc's profiling option "-fprofile-arcs" for the entire kernel may trigger compile/link/ run-time problems, some of which are caused by toolchain bugs and others which require adjustment of architecture code. For this reason profiling the entire kernel is initially restricted to those architectures for which it is known to work without changes. This restriction can be lifted once an architecture has been tested and found compatible with gcc's profiling. Profiling of single files or directories is still available on all platforms (see config help text). [1] http://gcc.gnu.org/onlinedocs/gcc/Gcov.html Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Huang Ying <ying.huang@intel.com> Cc: Li Wei <W.Li@Sun.COM> Cc: Michael Ellerman <michaele@au1.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Heiko Carstens <heicars2@linux.vnet.ibm.com> Cc: Martin Schwidefsky <mschwid2@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: WANG Cong <xiyou.wangcong@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> --- arch/Kconfig | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/Kconfig b/arch/Kconfig index 78a35e9..99193b1 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -112,3 +112,5 @@ config HAVE_DMA_API_DEBUG config HAVE_DEFAULT_NO_SPIN_MUTEXES bool + +source "kernel/gcov/Kconfig" -- cgit v1.1 From 7bf99fb673f18408be1ebc958321ef4c3f6da9e2 Mon Sep 17 00:00:00 2001 From: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Date: Wed, 17 Jun 2009 16:28:09 -0700 Subject: gcov: enable GCOV_PROFILE_ALL for x86_64 Enable gcov profiling of the entire kernel on x86_64. Required changes include disabling profiling for: * arch/kernel/acpi/realmode and arch/kernel/boot/compressed: not linked to main kernel * arch/vdso, arch/kernel/vsyscall_64 and arch/kernel/hpet: profiling causes segfaults during boot (incompatible context) Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Huang Ying <ying.huang@intel.com> Cc: Li Wei <W.Li@Sun.COM> Cc: Michael Ellerman <michaele@au1.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Heiko Carstens <heicars2@linux.vnet.ibm.com> Cc: Martin Schwidefsky <mschwid2@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: WANG Cong <xiyou.wangcong@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> --- arch/x86/boot/Makefile | 1 + arch/x86/boot/compressed/Makefile | 1 + arch/x86/kernel/Makefile | 2 ++ arch/x86/kernel/acpi/realmode/Makefile | 1 + arch/x86/vdso/Makefile | 1 + 5 files changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile index 8d16ada..ec749c2 100644 --- a/arch/x86/boot/Makefile +++ b/arch/x86/boot/Makefile @@ -70,6 +70,7 @@ KBUILD_CFLAGS := $(LINUXINCLUDE) -g -Os -D_SETUP -D__KERNEL__ \ $(call cc-option, -mpreferred-stack-boundary=2) KBUILD_CFLAGS += $(call cc-option, -m32) KBUILD_AFLAGS := $(KBUILD_CFLAGS) -D__ASSEMBLY__ +GCOV_PROFILE := n $(obj)/bzImage: asflags-y := $(SVGA_MODE) diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile index 49c8a4c..e2ff504 100644 --- a/arch/x86/boot/compressed/Makefile +++ b/arch/x86/boot/compressed/Makefile @@ -15,6 +15,7 @@ KBUILD_CFLAGS += $(call cc-option,-ffreestanding) KBUILD_CFLAGS += $(call cc-option,-fno-stack-protector) KBUILD_AFLAGS := $(KBUILD_CFLAGS) -D__ASSEMBLY__ +GCOV_PROFILE := n LDFLAGS := -m elf_$(UTS_MACHINE) LDFLAGS_vmlinux := -T diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index f3477bb..6c327b8 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -24,6 +24,8 @@ CFLAGS_vsyscall_64.o := $(PROFILING) -g0 $(nostackp) CFLAGS_hpet.o := $(nostackp) CFLAGS_tsc.o := $(nostackp) CFLAGS_paravirt.o := $(nostackp) +GCOV_PROFILE_vsyscall_64.o := n +GCOV_PROFILE_hpet.o := n obj-y := process_$(BITS).o signal.o entry_$(BITS).o obj-y += traps.o irq.o irq_$(BITS).o dumpstack_$(BITS).o diff --git a/arch/x86/kernel/acpi/realmode/Makefile b/arch/x86/kernel/acpi/realmode/Makefile index 167bc16..6a564ac 100644 --- a/arch/x86/kernel/acpi/realmode/Makefile +++ b/arch/x86/kernel/acpi/realmode/Makefile @@ -42,6 +42,7 @@ KBUILD_CFLAGS := $(LINUXINCLUDE) -g -Os -D_SETUP -D_WAKEUP -D__KERNEL__ \ $(call cc-option, -mpreferred-stack-boundary=2) KBUILD_CFLAGS += $(call cc-option, -m32) KBUILD_AFLAGS := $(KBUILD_CFLAGS) -D__ASSEMBLY__ +GCOV_PROFILE := n WAKEUP_OBJS = $(addprefix $(obj)/,$(wakeup-y)) diff --git a/arch/x86/vdso/Makefile b/arch/x86/vdso/Makefile index 16a9020..88112b49 100644 --- a/arch/x86/vdso/Makefile +++ b/arch/x86/vdso/Makefile @@ -123,6 +123,7 @@ quiet_cmd_vdso = VDSO $@ -Wl,-T,$(filter %.lds,$^) $(filter %.o,$^) VDSO_LDFLAGS = -fPIC -shared $(call ld-option, -Wl$(comma)--hash-style=sysv) +GCOV_PROFILE := n # # Install the unstripped copy of vdso*.so listed in $(vdso-install-y). -- cgit v1.1 From 7c095e4603dd6ce78ff5b9b70896fe3e05c13f5c Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Date: Wed, 17 Jun 2009 16:28:12 -0700 Subject: dma-mapping: x86: use asm-generic/dma-mapping-common.h Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Joerg Roedel <joerg.roedel@amd.com> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> --- arch/x86/Kconfig | 1 + arch/x86/include/asm/dma-mapping.h | 173 +------------------------------------ 2 files changed, 3 insertions(+), 171 deletions(-) (limited to 'arch') diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index cf42fc3..73c0bda 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -28,6 +28,7 @@ config X86 select HAVE_KPROBES select ARCH_WANT_OPTIONAL_GPIOLIB select ARCH_WANT_FRAME_POINTERS + select HAVE_DMA_ATTRS select HAVE_KRETPROBES select HAVE_FTRACE_MCOUNT_RECORD select HAVE_DYNAMIC_FTRACE diff --git a/arch/x86/include/asm/dma-mapping.h b/arch/x86/include/asm/dma-mapping.h index b93405b..1c3f943 100644 --- a/arch/x86/include/asm/dma-mapping.h +++ b/arch/x86/include/asm/dma-mapping.h @@ -33,6 +33,8 @@ static inline struct dma_map_ops *get_dma_ops(struct device *dev) #endif } +#include <asm-generic/dma-mapping-common.h> + /* Make sure we keep the same behaviour */ static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) { @@ -53,177 +55,6 @@ extern int dma_set_mask(struct device *dev, u64 mask); extern void *dma_generic_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_addr, gfp_t flag); -static inline dma_addr_t -dma_map_single(struct device *hwdev, void *ptr, size_t size, - enum dma_data_direction dir) -{ - struct dma_map_ops *ops = get_dma_ops(hwdev); - dma_addr_t addr; - - BUG_ON(!valid_dma_direction(dir)); - kmemcheck_mark_initialized(ptr, size); - addr = ops->map_page(hwdev, virt_to_page(ptr), - (unsigned long)ptr & ~PAGE_MASK, size, - dir, NULL); - debug_dma_map_page(hwdev, virt_to_page(ptr), - (unsigned long)ptr & ~PAGE_MASK, size, - dir, addr, true); - return addr; -} - -static inline void -dma_unmap_single(struct device *dev, dma_addr_t addr, size_t size, - enum dma_data_direction dir) -{ - struct dma_map_ops *ops = get_dma_ops(dev); - - BUG_ON(!valid_dma_direction(dir)); - if (ops->unmap_page) - ops->unmap_page(dev, addr, size, dir, NULL); - debug_dma_unmap_page(dev, addr, size, dir, true); -} - -static inline int -dma_map_sg(struct device *hwdev, struct scatterlist *sg, - int nents, enum dma_data_direction dir) -{ - struct dma_map_ops *ops = get_dma_ops(hwdev); - int ents; - struct scatterlist *s; - int i; - - BUG_ON(!valid_dma_direction(dir)); - for_each_sg(sg, s, nents, i) - kmemcheck_mark_initialized(sg_virt(s), s->length); - ents = ops->map_sg(hwdev, sg, nents, dir, NULL); - debug_dma_map_sg(hwdev, sg, nents, ents, dir); - - return ents; -} - -static inline void -dma_unmap_sg(struct device *hwdev, struct scatterlist *sg, int nents, - enum dma_data_direction dir) -{ - struct dma_map_ops *ops = get_dma_ops(hwdev); - - BUG_ON(!valid_dma_direction(dir)); - debug_dma_unmap_sg(hwdev, sg, nents, dir); - if (ops->unmap_sg) - ops->unmap_sg(hwdev, sg, nents, dir, NULL); -} - -static inline void -dma_sync_single_for_cpu(struct device *hwdev, dma_addr_t dma_handle, - size_t size, enum dma_data_direction dir) -{ - struct dma_map_ops *ops = get_dma_ops(hwdev); - - BUG_ON(!valid_dma_direction(dir)); - if (ops->sync_single_for_cpu) - ops->sync_single_for_cpu(hwdev, dma_handle, size, dir); - debug_dma_sync_single_for_cpu(hwdev, dma_handle, size, dir); - flush_write_buffers(); -} - -static inline void -dma_sync_single_for_device(struct device *hwdev, dma_addr_t dma_handle, - size_t size, enum dma_data_direction dir) -{ - struct dma_map_ops *ops = get_dma_ops(hwdev); - - BUG_ON(!valid_dma_direction(dir)); - if (ops->sync_single_for_device) - ops->sync_single_for_device(hwdev, dma_handle, size, dir); - debug_dma_sync_single_for_device(hwdev, dma_handle, size, dir); - flush_write_buffers(); -} - -static inline void -dma_sync_single_range_for_cpu(struct device *hwdev, dma_addr_t dma_handle, - unsigned long offset, size_t size, - enum dma_data_direction dir) -{ - struct dma_map_ops *ops = get_dma_ops(hwdev); - - BUG_ON(!valid_dma_direction(dir)); - if (ops->sync_single_range_for_cpu) - ops->sync_single_range_for_cpu(hwdev, dma_handle, offset, - size, dir); - debug_dma_sync_single_range_for_cpu(hwdev, dma_handle, - offset, size, dir); - flush_write_buffers(); -} - -static inline void -dma_sync_single_range_for_device(struct device *hwdev, dma_addr_t dma_handle, - unsigned long offset, size_t size, - enum dma_data_direction dir) -{ - struct dma_map_ops *ops = get_dma_ops(hwdev); - - BUG_ON(!valid_dma_direction(dir)); - if (ops->sync_single_range_for_device) - ops->sync_single_range_for_device(hwdev, dma_handle, - offset, size, dir); - debug_dma_sync_single_range_for_device(hwdev, dma_handle, - offset, size, dir); - flush_write_buffers(); -} - -static inline void -dma_sync_sg_for_cpu(struct device *hwdev, struct scatterlist *sg, - int nelems, enum dma_data_direction dir) -{ - struct dma_map_ops *ops = get_dma_ops(hwdev); - - BUG_ON(!valid_dma_direction(dir)); - if (ops->sync_sg_for_cpu) - ops->sync_sg_for_cpu(hwdev, sg, nelems, dir); - debug_dma_sync_sg_for_cpu(hwdev, sg, nelems, dir); - flush_write_buffers(); -} - -static inline void -dma_sync_sg_for_device(struct device *hwdev, struct scatterlist *sg, - int nelems, enum dma_data_direction dir) -{ - struct dma_map_ops *ops = get_dma_ops(hwdev); - - BUG_ON(!valid_dma_direction(dir)); - if (ops->sync_sg_for_device) - ops->sync_sg_for_device(hwdev, sg, nelems, dir); - debug_dma_sync_sg_for_device(hwdev, sg, nelems, dir); - - flush_write_buffers(); -} - -static inline dma_addr_t dma_map_page(struct device *dev, struct page *page, - size_t offset, size_t size, - enum dma_data_direction dir) -{ - struct dma_map_ops *ops = get_dma_ops(dev); - dma_addr_t addr; - - BUG_ON(!valid_dma_direction(dir)); - kmemcheck_mark_initialized(page_address(page) + offset, size); - addr = ops->map_page(dev, page, offset, size, dir, NULL); - debug_dma_map_page(dev, page, offset, size, dir, addr, false); - - return addr; -} - -static inline void dma_unmap_page(struct device *dev, dma_addr_t addr, - size_t size, enum dma_data_direction dir) -{ - struct dma_map_ops *ops = get_dma_ops(dev); - - BUG_ON(!valid_dma_direction(dir)); - if (ops->unmap_page) - ops->unmap_page(dev, addr, size, dir, NULL); - debug_dma_unmap_page(dev, addr, size, dir, false); -} - static inline void dma_cache_sync(struct device *dev, void *vaddr, size_t size, enum dma_data_direction dir) -- cgit v1.1 From d6d0a6aee252f004b06f27f74e401198f9c9ffb8 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Date: Wed, 17 Jun 2009 16:28:13 -0700 Subject: dma-mapping: ia64: use asm-generic/dma-mapping-common.h Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Joerg Roedel <joerg.roedel@amd.com> Cc: Ingo Molnar <mingo@elte.hu> Acked-by: "Luck, Tony" <tony.luck@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc; "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> --- arch/ia64/include/asm/dma-mapping.h | 102 ++---------------------------------- 1 file changed, 3 insertions(+), 99 deletions(-) (limited to 'arch') diff --git a/arch/ia64/include/asm/dma-mapping.h b/arch/ia64/include/asm/dma-mapping.h index 36c0009..2475c91 100644 --- a/arch/ia64/include/asm/dma-mapping.h +++ b/arch/ia64/include/asm/dma-mapping.h @@ -37,82 +37,10 @@ static inline void dma_free_coherent(struct device *dev, size_t size, #define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f) #define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h) -static inline dma_addr_t dma_map_single_attrs(struct device *dev, - void *caddr, size_t size, - enum dma_data_direction dir, - struct dma_attrs *attrs) -{ - struct dma_map_ops *ops = platform_dma_get_ops(dev); - return ops->map_page(dev, virt_to_page(caddr), - (unsigned long)caddr & ~PAGE_MASK, size, - dir, attrs); -} - -static inline void dma_unmap_single_attrs(struct device *dev, dma_addr_t daddr, - size_t size, - enum dma_data_direction dir, - struct dma_attrs *attrs) -{ - struct dma_map_ops *ops = platform_dma_get_ops(dev); - ops->unmap_page(dev, daddr, size, dir, attrs); -} - -#define dma_map_single(d, a, s, r) dma_map_single_attrs(d, a, s, r, NULL) -#define dma_unmap_single(d, a, s, r) dma_unmap_single_attrs(d, a, s, r, NULL) - -static inline int dma_map_sg_attrs(struct device *dev, struct scatterlist *sgl, - int nents, enum dma_data_direction dir, - struct dma_attrs *attrs) -{ - struct dma_map_ops *ops = platform_dma_get_ops(dev); - return ops->map_sg(dev, sgl, nents, dir, attrs); -} - -static inline void dma_unmap_sg_attrs(struct device *dev, - struct scatterlist *sgl, int nents, - enum dma_data_direction dir, - struct dma_attrs *attrs) -{ - struct dma_map_ops *ops = platform_dma_get_ops(dev); - ops->unmap_sg(dev, sgl, nents, dir, attrs); -} +#define get_dma_ops(dev) platform_dma_get_ops(dev) +#define flush_write_buffers() -#define dma_map_sg(d, s, n, r) dma_map_sg_attrs(d, s, n, r, NULL) -#define dma_unmap_sg(d, s, n, r) dma_unmap_sg_attrs(d, s, n, r, NULL) - -static inline void dma_sync_single_for_cpu(struct device *dev, dma_addr_t daddr, - size_t size, - enum dma_data_direction dir) -{ - struct dma_map_ops *ops = platform_dma_get_ops(dev); - ops->sync_single_for_cpu(dev, daddr, size, dir); -} - -static inline void dma_sync_sg_for_cpu(struct device *dev, - struct scatterlist *sgl, - int nents, enum dma_data_direction dir) -{ - struct dma_map_ops *ops = platform_dma_get_ops(dev); - ops->sync_sg_for_cpu(dev, sgl, nents, dir); -} - -static inline void dma_sync_single_for_device(struct device *dev, - dma_addr_t daddr, - size_t size, - enum dma_data_direction dir) -{ - struct dma_map_ops *ops = platform_dma_get_ops(dev); - ops->sync_single_for_device(dev, daddr, size, dir); -} - -static inline void dma_sync_sg_for_device(struct device *dev, - struct scatterlist *sgl, - int nents, - enum dma_data_direction dir) -{ - struct dma_map_ops *ops = platform_dma_get_ops(dev); - ops->sync_sg_for_device(dev, sgl, nents, dir); -} +#include <asm-generic/dma-mapping-common.h> static inline int dma_mapping_error(struct device *dev, dma_addr_t daddr) { @@ -120,30 +48,6 @@ static inline int dma_mapping_error(struct device *dev, dma_addr_t daddr) return ops->mapping_error(dev, daddr); } -static inline dma_addr_t dma_map_page(struct device *dev, struct page *page, - size_t offset, size_t size, - enum dma_data_direction dir) -{ - struct dma_map_ops *ops = platform_dma_get_ops(dev); - return ops->map_page(dev, page, offset, size, dir, NULL); -} - -static inline void dma_unmap_page(struct device *dev, dma_addr_t addr, - size_t size, enum dma_data_direction dir) -{ - dma_unmap_single(dev, addr, size, dir); -} - -/* - * Rest of this file is part of the "Advanced DMA API". Use at your own risk. - * See Documentation/DMA-API.txt for details. - */ - -#define dma_sync_single_range_for_cpu(dev, dma_handle, offset, size, dir) \ - dma_sync_single_for_cpu(dev, dma_handle, size, dir) -#define dma_sync_single_range_for_device(dev, dma_handle, offset, size, dir) \ - dma_sync_single_for_device(dev, dma_handle, size, dir) - static inline int dma_supported(struct device *dev, u64 mask) { struct dma_map_ops *ops = platform_dma_get_ops(dev); -- cgit v1.1 From 9916219579d078c80377dd3988c2cc213536d868 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Date: Wed, 17 Jun 2009 16:28:14 -0700 Subject: dma-mapping: ia64: add CONFIG_DMA_API_DEBUG support Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Joerg Roedel <joerg.roedel@amd.com> Cc: Ingo Molnar <mingo@elte.hu> Acked-by: "Luck, Tony" <tony.luck@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc; "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> --- arch/ia64/Kconfig | 1 + arch/ia64/include/asm/dma-mapping.h | 8 +++++++- 2 files changed, 8 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 294a3b1..170042b 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -28,6 +28,7 @@ config IA64 select HAVE_DMA_ATTRS select HAVE_KVM select HAVE_ARCH_TRACEHOOK + select HAVE_DMA_API_DEBUG default y help The Itanium Processor Family is Intel's 64-bit successor to diff --git a/arch/ia64/include/asm/dma-mapping.h b/arch/ia64/include/asm/dma-mapping.h index 2475c91..5a61b5c 100644 --- a/arch/ia64/include/asm/dma-mapping.h +++ b/arch/ia64/include/asm/dma-mapping.h @@ -8,6 +8,7 @@ #include <asm/machvec.h> #include <linux/scatterlist.h> #include <asm/swiotlb.h> +#include <linux/dma-debug.h> #define ARCH_HAS_DMA_GET_REQUIRED_MASK @@ -24,13 +25,18 @@ static inline void *dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *daddr, gfp_t gfp) { struct dma_map_ops *ops = platform_dma_get_ops(dev); - return ops->alloc_coherent(dev, size, daddr, gfp); + void *caddr; + + caddr = ops->alloc_coherent(dev, size, daddr, gfp); + debug_dma_alloc_coherent(dev, size, *daddr, caddr); + return caddr; } static inline void dma_free_coherent(struct device *dev, size_t size, void *caddr, dma_addr_t daddr) { struct dma_map_ops *ops = platform_dma_get_ops(dev); + debug_dma_free_coherent(dev, size, caddr, daddr); ops->free_coherent(dev, size, caddr, daddr); } -- cgit v1.1 From 5ae8606d5746bc84e19018fc3753cc1faf18843f Mon Sep 17 00:00:00 2001 From: Mark Salter <msalter@redhat.com> Date: Wed, 17 Jun 2009 22:51:11 +0100 Subject: MN10300: Add support for new ELF relocs in kernel modules Add support for new relocs which may show up in MN10300 kernel modules due to linker relaxation. Signed-off-by: Mark Salter <msalter@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> --- arch/mn10300/include/asm/elf.h | 2 ++ arch/mn10300/kernel/module.c | 39 ++++++++++++++++++++++++++++++++++++--- 2 files changed, 38 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/mn10300/include/asm/elf.h b/arch/mn10300/include/asm/elf.h index 4910546..75a70aa 100644 --- a/arch/mn10300/include/asm/elf.h +++ b/arch/mn10300/include/asm/elf.h @@ -28,6 +28,8 @@ #define R_MN10300_PCREL8 6 /* PC-relative 8-bit signed. */ #define R_MN10300_24 9 /* Direct 24 bit. */ #define R_MN10300_RELATIVE 23 /* Adjust by program base. */ +#define R_MN10300_SYM_DIFF 33 /* Adjustment when relaxing. */ +#define R_MN10300_ALIGN 34 /* Alignment requirement. */ /* * ELF register definitions.. diff --git a/arch/mn10300/kernel/module.c b/arch/mn10300/kernel/module.c index 4fa0e36..6aea7fd 100644 --- a/arch/mn10300/kernel/module.c +++ b/arch/mn10300/kernel/module.c @@ -1,6 +1,6 @@ /* MN10300 Kernel module helper routines * - * Copyright (C) 2007, 2008 Red Hat, Inc. All Rights Reserved. + * Copyright (C) 2007, 2008, 2009 Red Hat, Inc. All Rights Reserved. * Written by Mark Salter (msalter@redhat.com) * - Derived from arch/i386/kernel/module.c * @@ -103,10 +103,10 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, unsigned int relsec, struct module *me) { - unsigned int i; + unsigned int i, sym_diff_seen = 0; Elf32_Rela *rel = (void *)sechdrs[relsec].sh_addr; Elf32_Sym *sym; - Elf32_Addr relocation; + Elf32_Addr relocation, sym_diff_val = 0; uint8_t *location; uint32_t value; @@ -126,6 +126,22 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, /* this is the adjustment to be made */ relocation = sym->st_value + rel[i].r_addend; + if (sym_diff_seen) { + switch (ELF32_R_TYPE(rel[i].r_info)) { + case R_MN10300_32: + case R_MN10300_24: + case R_MN10300_16: + case R_MN10300_8: + relocation -= sym_diff_val; + sym_diff_seen = 0; + break; + default: + printk(KERN_ERR "module %s: Unexpected SYM_DIFF relocation: %u\n", + me->name, ELF32_R_TYPE(rel[i].r_info)); + return -ENOEXEC; + } + } + switch (ELF32_R_TYPE(rel[i].r_info)) { /* for the first four relocation types, we simply * store the adjustment at the location given */ @@ -157,12 +173,29 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, *location = relocation - (uint32_t) location; break; + case R_MN10300_SYM_DIFF: + /* This is used to adjust the next reloc as required + * by relaxation. */ + sym_diff_seen = 1; + sym_diff_val = sym->st_value; + break; + + case R_MN10300_ALIGN: + /* Just ignore the ALIGN relocs. + * Only interesting if kernel performed relaxation. */ + continue; + default: printk(KERN_ERR "module %s: Unknown relocation: %u\n", me->name, ELF32_R_TYPE(rel[i].r_info)); return -ENOEXEC; } } + if (sym_diff_seen) { + printk(KERN_ERR "module %s: Nothing follows SYM_DIFF relocation: %u\n", + me->name, ELF32_R_TYPE(rel[i].r_info)); + return -ENOEXEC; + } return 0; } -- cgit v1.1 From 71e308a239c098673570d0b417d42262bb535909 Mon Sep 17 00:00:00 2001 From: Steven Rostedt <srostedt@redhat.com> Date: Thu, 18 Jun 2009 12:45:08 -0400 Subject: function-graph: add stack frame test In case gcc does something funny with the stack frames, or the return from function code, we would like to detect that. An arch may implement passing of a variable that is unique to the function and can be saved on entering a function and can be tested when exiting the function. Usually the frame pointer can be used for this purpose. This patch also implements this for x86. Where it passes in the stack frame of the parent function, and will test that frame on exit. There was a case in x86_32 with optimize for size (-Os) where, for a few functions, gcc would align the stack frame and place a copy of the return address into it. The function graph tracer modified the copy and not the actual return address. On return from the funtion, it did not go to the tracer hook, but returned to the parent. This broke the function graph tracer, because the return of the parent (where gcc did not do this funky manipulation) returned to the location that the child function was suppose to. This caused strange kernel crashes. This test detected the problem and pointed out where the issue was. This modifies the parameters of one of the functions that the arch specific code calls, so it includes changes to arch code to accommodate the new prototype. Note, I notice that the parsic arch implements its own push_return_trace. This is now a generic function and the ftrace_push_return_trace should be used instead. This patch does not touch that code. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Helge Deller <deller@gmx.de> Cc: Kyle McMartin <kyle@mcmartin.ca> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> --- arch/powerpc/kernel/ftrace.c | 2 +- arch/s390/kernel/ftrace.c | 2 +- arch/x86/Kconfig | 1 + arch/x86/kernel/entry_32.S | 2 ++ arch/x86/kernel/entry_64.S | 2 ++ arch/x86/kernel/ftrace.c | 6 ++++-- 6 files changed, 11 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/ftrace.c b/arch/powerpc/kernel/ftrace.c index 2d182f1..58d6a61 100644 --- a/arch/powerpc/kernel/ftrace.c +++ b/arch/powerpc/kernel/ftrace.c @@ -605,7 +605,7 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr) return; } - if (ftrace_push_return_trace(old, self_addr, &trace.depth) == -EBUSY) { + if (ftrace_push_return_trace(old, self_addr, &trace.depth, 0) == -EBUSY) { *parent = old; return; } diff --git a/arch/s390/kernel/ftrace.c b/arch/s390/kernel/ftrace.c index 82ddfd3..3e298e6 100644 --- a/arch/s390/kernel/ftrace.c +++ b/arch/s390/kernel/ftrace.c @@ -190,7 +190,7 @@ unsigned long prepare_ftrace_return(unsigned long ip, unsigned long parent) goto out; if (unlikely(atomic_read(¤t->tracing_graph_pause))) goto out; - if (ftrace_push_return_trace(parent, ip, &trace.depth) == -EBUSY) + if (ftrace_push_return_trace(parent, ip, &trace.depth, 0) == -EBUSY) goto out; trace.func = ftrace_mcount_call_adjust(ip) & PSW_ADDR_INSN; /* Only trace if the calling function expects to. */ diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 356d2ec..fcf12af 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -33,6 +33,7 @@ config X86 select HAVE_DYNAMIC_FTRACE select HAVE_FUNCTION_TRACER select HAVE_FUNCTION_GRAPH_TRACER + select HAVE_FUNCTION_GRAPH_FP_TEST select HAVE_FUNCTION_TRACE_MCOUNT_TEST select HAVE_FTRACE_NMI_ENTER if DYNAMIC_FTRACE select HAVE_FTRACE_SYSCALLS diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S index c929add..0d4b285 100644 --- a/arch/x86/kernel/entry_32.S +++ b/arch/x86/kernel/entry_32.S @@ -1154,6 +1154,7 @@ ENTRY(ftrace_graph_caller) pushl %edx movl 0xc(%esp), %edx lea 0x4(%ebp), %eax + movl (%ebp), %ecx subl $MCOUNT_INSN_SIZE, %edx call prepare_ftrace_return popl %edx @@ -1168,6 +1169,7 @@ return_to_handler: pushl %eax pushl %ecx pushl %edx + movl %ebp, %eax call ftrace_return_to_handler movl %eax, 0xc(%esp) popl %edx diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S index de74f0a..c251be7 100644 --- a/arch/x86/kernel/entry_64.S +++ b/arch/x86/kernel/entry_64.S @@ -135,6 +135,7 @@ ENTRY(ftrace_graph_caller) leaq 8(%rbp), %rdi movq 0x38(%rsp), %rsi + movq (%rbp), %rdx subq $MCOUNT_INSN_SIZE, %rsi call prepare_ftrace_return @@ -150,6 +151,7 @@ GLOBAL(return_to_handler) /* Save the return values */ movq %rax, (%rsp) movq %rdx, 8(%rsp) + movq %rbp, %rdi call ftrace_return_to_handler diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c index b79c553..d94e1ea 100644 --- a/arch/x86/kernel/ftrace.c +++ b/arch/x86/kernel/ftrace.c @@ -408,7 +408,8 @@ int ftrace_disable_ftrace_graph_caller(void) * Hook the return address and push it in the stack of return addrs * in current thread info. */ -void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr) +void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr, + unsigned long frame_pointer) { unsigned long old; int faulted; @@ -453,7 +454,8 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr) return; } - if (ftrace_push_return_trace(old, self_addr, &trace.depth) == -EBUSY) { + if (ftrace_push_return_trace(old, self_addr, &trace.depth, + frame_pointer) == -EBUSY) { *parent = old; return; } -- cgit v1.1 From c36953419b40be301c9a7d8be933afdb6c892cfd Mon Sep 17 00:00:00 2001 From: Mike Frysinger <vapier@gentoo.org> Date: Sat, 13 Jun 2009 10:32:29 -0400 Subject: Blackfin: use common test_bit() rather than __test_bit() Convert to test_bit() as that is what pretty much everyone uses and allows us to migrate asm/bitops.h to the asm-generic version. Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- arch/blackfin/mach-common/ints-priority.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c index 351afd0..af70f09 100644 --- a/arch/blackfin/mach-common/ints-priority.c +++ b/arch/blackfin/mach-common/ints-priority.c @@ -472,7 +472,7 @@ static int bfin_gpio_irq_type(unsigned int irq, unsigned int type) if (type == IRQ_TYPE_PROBE) { /* only probe unenabled GPIO interrupt lines */ - if (__test_bit(gpionr, gpio_enabled)) + if (test_bit(gpionr, gpio_enabled)) return 0; type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; } @@ -782,7 +782,7 @@ static int bfin_gpio_irq_type(unsigned int irq, unsigned int type) if (type == IRQ_TYPE_PROBE) { /* only probe unenabled GPIO interrupt lines */ - if (__test_bit(gpionr, gpio_enabled)) + if (test_bit(gpionr, gpio_enabled)) return 0; type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; } -- cgit v1.1 From abea0bc3d990e5d80f6112985cecee68922a08a3 Mon Sep 17 00:00:00 2001 From: Mike Frysinger <vapier@gentoo.org> Date: Sat, 13 Jun 2009 10:35:10 -0400 Subject: Blackfin: pull in asm/io.h in ksyms for prototypes Make sure we pull in asm/io.h when exporting symbols for the I/O functions so we don't end up with a build failure due to missing prototypes. Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- arch/blackfin/kernel/bfin_ksyms.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/blackfin/kernel/bfin_ksyms.c b/arch/blackfin/kernel/bfin_ksyms.c index aa05e63..ed8392c 100644 --- a/arch/blackfin/kernel/bfin_ksyms.c +++ b/arch/blackfin/kernel/bfin_ksyms.c @@ -10,6 +10,7 @@ #include <linux/uaccess.h> #include <asm/cacheflush.h> +#include <asm/io.h> /* Allow people to have their own Blackfin exception handler in a module */ EXPORT_SYMBOL(bfin_return_from_exception); -- cgit v1.1 From cf8d943260528b669c9f0fa6fb4f1c17cab0ecda Mon Sep 17 00:00:00 2001 From: Mike Frysinger <vapier@gentoo.org> Date: Sat, 13 Jun 2009 10:14:24 -0400 Subject: Blackfin: only build irqpanic.c when needed The irq_panic function is only used when CONFIG_DEBUG_ICACHE_CHECK is enabled, so move the conditional build to the Makefile rather than wrapping all of the contents of the file. Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- arch/blackfin/mach-common/Makefile | 3 ++- arch/blackfin/mach-common/irqpanic.c | 11 ++--------- 2 files changed, 4 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/mach-common/Makefile b/arch/blackfin/mach-common/Makefile index 1f3228e..dd8b2dc 100644 --- a/arch/blackfin/mach-common/Makefile +++ b/arch/blackfin/mach-common/Makefile @@ -4,7 +4,7 @@ obj-y := \ cache.o cache-c.o entry.o head.o \ - interrupt.o irqpanic.o arch_checks.o ints-priority.o + interrupt.o arch_checks.o ints-priority.o obj-$(CONFIG_BFIN_ICACHE_LOCK) += lock.o obj-$(CONFIG_PM) += pm.o dpmc_modes.o @@ -12,3 +12,4 @@ obj-$(CONFIG_CPU_FREQ) += cpufreq.o obj-$(CONFIG_CPU_VOLTAGE) += dpmc.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_BFIN_KERNEL_CLOCK) += clocks-init.o +obj-$(CONFIG_DEBUG_ICACHE_CHECK) += irqpanic.o diff --git a/arch/blackfin/mach-common/irqpanic.c b/arch/blackfin/mach-common/irqpanic.c index 05004df..883e324 100644 --- a/arch/blackfin/mach-common/irqpanic.c +++ b/arch/blackfin/mach-common/irqpanic.c @@ -30,21 +30,17 @@ #include <linux/module.h> #include <linux/kernel_stat.h> #include <linux/sched.h> -#include <asm/traps.h> #include <asm/blackfin.h> -#ifdef CONFIG_DEBUG_ICACHE_CHECK #define L1_ICACHE_START 0xffa10000 #define L1_ICACHE_END 0xffa13fff -void irq_panic(int reason, struct pt_regs *regs) __attribute__ ((l1_text)); -#endif /* * irq_panic - calls panic with string setup */ +__attribute__ ((l1_text)) asmlinkage void irq_panic(int reason, struct pt_regs *regs) { -#ifdef CONFIG_DEBUG_ICACHE_CHECK unsigned int cmd, tag, ca, cache_hi, cache_lo, *pa; unsigned short i, j, die; unsigned int bad[10][6]; @@ -126,9 +122,6 @@ asmlinkage void irq_panic(int reason, struct pt_regs *regs) bad[j][3], bad[j][4], bad[j][5]); } panic("icache coherency error"); - } else { + } else printk(KERN_EMERG "icache checked, and OK\n"); - } -#endif - } -- cgit v1.1 From 83dab40350bda28603036d03d58f1faf0a2a5627 Mon Sep 17 00:00:00 2001 From: Mike Frysinger <vapier@gentoo.org> Date: Sat, 13 Jun 2009 07:42:26 -0400 Subject: Blackfin: convert asm/ioctls.h to asm-generic/ioctls.h Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- arch/blackfin/include/asm/ioctls.h | 84 +------------------------------------- 1 file changed, 2 insertions(+), 82 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/include/asm/ioctls.h b/arch/blackfin/include/asm/ioctls.h index 895e317..eca8d75 100644 --- a/arch/blackfin/include/asm/ioctls.h +++ b/arch/blackfin/include/asm/ioctls.h @@ -1,87 +1,7 @@ #ifndef __ARCH_BFIN_IOCTLS_H__ #define __ARCH_BFIN_IOCTLS_H__ -#include <asm/ioctl.h> - -/* 0x54 is just a magic number to make these relatively unique ('T') */ - -#define TCGETS 0x5401 -#define TCSETS 0x5402 -#define TCSETSW 0x5403 -#define TCSETSF 0x5404 -#define TCGETA 0x5405 -#define TCSETA 0x5406 -#define TCSETAW 0x5407 -#define TCSETAF 0x5408 -#define TCSBRK 0x5409 -#define TCXONC 0x540A -#define TCFLSH 0x540B -#define TIOCEXCL 0x540C -#define TIOCNXCL 0x540D -#define TIOCSCTTY 0x540E -#define TIOCGPGRP 0x540F -#define TIOCSPGRP 0x5410 -#define TIOCOUTQ 0x5411 -#define TIOCSTI 0x5412 -#define TIOCGWINSZ 0x5413 -#define TIOCSWINSZ 0x5414 -#define TIOCMGET 0x5415 -#define TIOCMBIS 0x5416 -#define TIOCMBIC 0x5417 -#define TIOCMSET 0x5418 -#define TIOCGSOFTCAR 0x5419 -#define TIOCSSOFTCAR 0x541A -#define FIONREAD 0x541B -#define TIOCINQ FIONREAD -#define TIOCLINUX 0x541C -#define TIOCCONS 0x541D -#define TIOCGSERIAL 0x541E -#define TIOCSSERIAL 0x541F -#define TIOCPKT 0x5420 -#define FIONBIO 0x5421 -#define TIOCNOTTY 0x5422 -#define TIOCSETD 0x5423 -#define TIOCGETD 0x5424 -#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */ -#define TIOCTTYGSTRUCT 0x5426 /* For debugging only */ -#define TIOCSBRK 0x5427 /* BSD compatibility */ -#define TIOCCBRK 0x5428 /* BSD compatibility */ -#define TIOCGSID 0x5429 /* Return the session ID of FD */ -#define TCGETS2 _IOR('T', 0x2A, struct termios2) -#define TCSETS2 _IOW('T', 0x2B, struct termios2) -#define TCSETSW2 _IOW('T', 0x2C, struct termios2) -#define TCSETSF2 _IOW('T', 0x2D, struct termios2) -/* Get Pty Number (of pty-mux device) */ -#define TIOCGPTN _IOR('T', 0x30, unsigned int) -#define TIOCSPTLCK _IOW('T', 0x31, int) /* Lock/unlock Pty */ - -#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */ -#define FIOCLEX 0x5451 -#define FIOASYNC 0x5452 -#define TIOCSERCONFIG 0x5453 -#define TIOCSERGWILD 0x5454 -#define TIOCSERSWILD 0x5455 -#define TIOCGLCKTRMIOS 0x5456 -#define TIOCSLCKTRMIOS 0x5457 -#define TIOCSERGSTRUCT 0x5458 /* For debugging only */ -#define TIOCSERGETLSR 0x5459 /* Get line status register */ -#define TIOCSERGETMULTI 0x545A /* Get multiport config */ -#define TIOCSERSETMULTI 0x545B /* Set multiport config */ - -#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */ -#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ - #define FIOQSIZE 0x545E +#include <asm-generic/ioctls.h> -/* Used for packet mode */ -#define TIOCPKT_DATA 0 -#define TIOCPKT_FLUSHREAD 1 -#define TIOCPKT_FLUSHWRITE 2 -#define TIOCPKT_STOP 4 -#define TIOCPKT_START 8 -#define TIOCPKT_NOSTOP 16 -#define TIOCPKT_DOSTOP 32 - -#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ - -#endif /* __ARCH_BFIN_IOCTLS_H__ */ +#endif -- cgit v1.1 From 71b844f163f8ab66227563c74ef012b4ea5049c8 Mon Sep 17 00:00:00 2001 From: Mike Frysinger <vapier@gentoo.org> Date: Sat, 13 Jun 2009 10:40:15 -0400 Subject: Blackfin: convert shm/sysv/ipc to asm-generic Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- arch/blackfin/include/asm/ipcbuf.h | 31 +------------------------- arch/blackfin/include/asm/msgbuf.h | 32 +-------------------------- arch/blackfin/include/asm/sembuf.h | 26 +--------------------- arch/blackfin/include/asm/shmbuf.h | 43 +----------------------------------- arch/blackfin/include/asm/shmparam.h | 7 +----- 5 files changed, 5 insertions(+), 134 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/include/asm/ipcbuf.h b/arch/blackfin/include/asm/ipcbuf.h index 8f0899c..84c7e51 100644 --- a/arch/blackfin/include/asm/ipcbuf.h +++ b/arch/blackfin/include/asm/ipcbuf.h @@ -1,30 +1 @@ -/* Changes origined from m68k version. Lineo Inc. May 2001 */ - -#ifndef __BFIN_IPCBUF_H__ -#define __BFIN_IPCBUF_H__ - -/* - * The user_ipc_perm structure for m68k architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 32-bit mode_t and seq - * - 2 miscellaneous 32-bit values - */ - -struct ipc64_perm { - __kernel_key_t key; - __kernel_uid32_t uid; - __kernel_gid32_t gid; - __kernel_uid32_t cuid; - __kernel_gid32_t cgid; - __kernel_mode_t mode; - unsigned short __pad1; - unsigned short seq; - unsigned short __pad2; - unsigned long __unused1; - unsigned long __unused2; -}; - -#endif /* __BFIN_IPCBUF_H__ */ +#include <asm-generic/ipcbuf.h> diff --git a/arch/blackfin/include/asm/msgbuf.h b/arch/blackfin/include/asm/msgbuf.h index 6fcbe8c..809134c 100644 --- a/arch/blackfin/include/asm/msgbuf.h +++ b/arch/blackfin/include/asm/msgbuf.h @@ -1,31 +1 @@ -#ifndef _BFIN_MSGBUF_H -#define _BFIN_MSGBUF_H - -/* - * The msqid64_ds structure for bfin architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct msqid64_ds { - struct ipc64_perm msg_perm; - __kernel_time_t msg_stime; /* last msgsnd time */ - unsigned long __unused1; - __kernel_time_t msg_rtime; /* last msgrcv time */ - unsigned long __unused2; - __kernel_time_t msg_ctime; /* last change time */ - unsigned long __unused3; - unsigned long msg_cbytes; /* current number of bytes on queue */ - unsigned long msg_qnum; /* number of messages in queue */ - unsigned long msg_qbytes; /* max number of bytes on queue */ - __kernel_pid_t msg_lspid; /* pid of last msgsnd */ - __kernel_pid_t msg_lrpid; /* last receive pid */ - unsigned long __unused4; - unsigned long __unused5; -}; - -#endif /* _BFIN_MSGBUF_H */ +#include <asm-generic/msgbuf.h> diff --git a/arch/blackfin/include/asm/sembuf.h b/arch/blackfin/include/asm/sembuf.h index 18deb5c..7673b83 100644 --- a/arch/blackfin/include/asm/sembuf.h +++ b/arch/blackfin/include/asm/sembuf.h @@ -1,25 +1 @@ -#ifndef _BFIN_SEMBUF_H -#define _BFIN_SEMBUF_H - -/* - * The semid64_ds structure for bfin architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct semid64_ds { - struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ - __kernel_time_t sem_otime; /* last semop time */ - unsigned long __unused1; - __kernel_time_t sem_ctime; /* last change time */ - unsigned long __unused2; - unsigned long sem_nsems; /* no. of semaphores in array */ - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* _BFIN_SEMBUF_H */ +#include <asm-generic/sembuf.h> diff --git a/arch/blackfin/include/asm/shmbuf.h b/arch/blackfin/include/asm/shmbuf.h index 6124363..83c05fc 100644 --- a/arch/blackfin/include/asm/shmbuf.h +++ b/arch/blackfin/include/asm/shmbuf.h @@ -1,42 +1 @@ -#ifndef _BFIN_SHMBUF_H -#define _BFIN_SHMBUF_H - -/* - * The shmid64_ds structure for bfin architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct shmid64_ds { - struct ipc64_perm shm_perm; /* operation perms */ - size_t shm_segsz; /* size of segment (bytes) */ - __kernel_time_t shm_atime; /* last attach time */ - unsigned long __unused1; - __kernel_time_t shm_dtime; /* last detach time */ - unsigned long __unused2; - __kernel_time_t shm_ctime; /* last change time */ - unsigned long __unused3; - __kernel_pid_t shm_cpid; /* pid of creator */ - __kernel_pid_t shm_lpid; /* pid of last operator */ - unsigned long shm_nattch; /* no. of current attaches */ - unsigned long __unused4; - unsigned long __unused5; -}; - -struct shminfo64 { - unsigned long shmmax; - unsigned long shmmin; - unsigned long shmmni; - unsigned long shmseg; - unsigned long shmall; - unsigned long __unused1; - unsigned long __unused2; - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* _BFIN_SHMBUF_H */ +#include <asm-generic/shmbuf.h> diff --git a/arch/blackfin/include/asm/shmparam.h b/arch/blackfin/include/asm/shmparam.h index 3c03906..93f30de 100644 --- a/arch/blackfin/include/asm/shmparam.h +++ b/arch/blackfin/include/asm/shmparam.h @@ -1,6 +1 @@ -#ifndef _BFIN_SHMPARAM_H -#define _BFIN_SHMPARAM_H - -#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */ - -#endif /* _BFIN_SHMPARAM_H */ +#include <asm-generic/shmparam.h> -- cgit v1.1 From 420b61f4a7e4ea85be8d9f8138fef99c6a55a888 Mon Sep 17 00:00:00 2001 From: Mike Frysinger <vapier@gentoo.org> Date: Sat, 13 Jun 2009 10:40:29 -0400 Subject: Blackfin: convert user/elf to asm-generic Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- arch/blackfin/include/asm/elf.h | 2 +- arch/blackfin/include/asm/user.h | 90 +--------------------------------------- 2 files changed, 2 insertions(+), 90 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/include/asm/elf.h b/arch/blackfin/include/asm/elf.h index 230e160..5a87baf 100644 --- a/arch/blackfin/include/asm/elf.h +++ b/arch/blackfin/include/asm/elf.h @@ -20,7 +20,7 @@ typedef unsigned long elf_greg_t; -#define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t)) +#define ELF_NGREG 40 /* (sizeof(struct user_regs_struct) / sizeof(elf_greg_t)) */ typedef elf_greg_t elf_gregset_t[ELF_NGREG]; typedef struct user_bfinfp_struct elf_fpregset_t; diff --git a/arch/blackfin/include/asm/user.h b/arch/blackfin/include/asm/user.h index afe6a0e..4792a60 100644 --- a/arch/blackfin/include/asm/user.h +++ b/arch/blackfin/include/asm/user.h @@ -1,89 +1 @@ -#ifndef _BFIN_USER_H -#define _BFIN_USER_H - -/* Changes by Tony Kou Lineo, Inc. July, 2001 - * - * Based include/asm-m68knommu/user.h - * - */ - -/* Core file format: The core file is written in such a way that gdb - can understand it and provide useful information to the user (under - linux we use the 'trad-core' bfd). There are quite a number of - obstacles to being able to view the contents of the floating point - registers, and until these are solved you will not be able to view the - contents of them. Actually, you can read in the core file and look at - the contents of the user struct to find out what the floating point - registers contain. - The actual file contents are as follows: - UPAGE: 1 page consisting of a user struct that tells gdb what is present - in the file. Directly after this is a copy of the task_struct, which - is currently not used by gdb, but it may come in useful at some point. - All of the registers are stored as part of the upage. The upage should - always be only one page. - DATA: The data area is stored. We use current->end_text to - current->brk to pick up all of the user variables, plus any memory - that may have been malloced. No attempt is made to determine if a page - is demand-zero or if a page is totally unused, we just cover the entire - range. All of the addresses are rounded in such a way that an integral - number of pages is written. - STACK: We need the stack information in order to get a meaningful - backtrace. We need to write the data from (esp) to - current->start_stack, so we round each of these off in order to be able - to write an integer number of pages. - The minimum core file size is 3 pages, or 12288 bytes. -*/ -struct user_bfinfp_struct { -}; - -/* This is the old layout of "struct pt_regs" as of Linux 1.x, and - is still the layout used by user (the new pt_regs doesn't have - all registers). */ -struct user_regs_struct { - long r0, r1, r2, r3, r4, r5, r6, r7; - long p0, p1, p2, p3, p4, p5, usp, fp; - long i0, i1, i2, i3; - long l0, l1, l2, l3; - long b0, b1, b2, b3; - long m0, m1, m2, m3; - long a0w, a1w; - long a0x, a1x; - unsigned long rets; - unsigned long astat; - unsigned long pc; - unsigned long orig_p0; -}; - -/* When the kernel dumps core, it starts by dumping the user struct - - this will be used by gdb to figure out where the data and stack segments - are within the file, and what virtual addresses to use. */ - -struct user { -/* We start with the registers, to mimic the way that "memory" is returned - from the ptrace(3,...) function. */ - - struct user_regs_struct regs; /* Where the registers are actually stored */ - -/* The rest of this junk is to help gdb figure out what goes where */ - unsigned long int u_tsize; /* Text segment size (pages). */ - unsigned long int u_dsize; /* Data segment size (pages). */ - unsigned long int u_ssize; /* Stack segment size (pages). */ - unsigned long start_code; /* Starting virtual address of text. */ - unsigned long start_stack; /* Starting virtual address of stack area. - This is actually the bottom of the stack, - the top of the stack is always found in the - esp register. */ - long int signal; /* Signal that caused the core dump. */ - int reserved; /* No longer used */ - unsigned long u_ar0; - /* Used by gdb to help find the values for */ - /* the registers. */ - unsigned long magic; /* To uniquely identify a core file */ - char u_comm[32]; /* User command that was responsible */ -}; -#define NBPG PAGE_SIZE -#define UPAGES 1 -#define HOST_TEXT_START_ADDR (u.start_code) -#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG) - -#endif +#include <asm-generic/user.h> -- cgit v1.1 From 3be5646c98169ee5d72847dff1fc459fcd8673d2 Mon Sep 17 00:00:00 2001 From: Mike Frysinger <vapier@gentoo.org> Date: Sat, 13 Jun 2009 10:41:25 -0400 Subject: Blackfin: convert socket/poll to asm-generic Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- arch/blackfin/include/asm/poll.h | 21 ++----------- arch/blackfin/include/asm/socket.h | 60 +------------------------------------ arch/blackfin/include/asm/sockios.h | 14 +-------- 3 files changed, 5 insertions(+), 90 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/include/asm/poll.h b/arch/blackfin/include/asm/poll.h index 94cc263..a055667 100644 --- a/arch/blackfin/include/asm/poll.h +++ b/arch/blackfin/include/asm/poll.h @@ -1,24 +1,9 @@ #ifndef __BFIN_POLL_H #define __BFIN_POLL_H -#define POLLIN 1 -#define POLLPRI 2 -#define POLLOUT 4 -#define POLLERR 8 -#define POLLHUP 16 -#define POLLNVAL 32 -#define POLLRDNORM 64 -#define POLLWRNORM POLLOUT -#define POLLRDBAND 128 +#define POLLWRNORM 4 /* POLLOUT */ #define POLLWRBAND 256 -#define POLLMSG 0x0400 -#define POLLREMOVE 0x1000 -#define POLLRDHUP 0x2000 -struct pollfd { - int fd; - short events; - short revents; -}; +#include <asm-generic/poll.h> -#endif /* __BFIN_POLL_H */ +#endif diff --git a/arch/blackfin/include/asm/socket.h b/arch/blackfin/include/asm/socket.h index fac7fe9..6b71384 100644 --- a/arch/blackfin/include/asm/socket.h +++ b/arch/blackfin/include/asm/socket.h @@ -1,59 +1 @@ -#ifndef _ASM_SOCKET_H -#define _ASM_SOCKET_H - -#include <asm/sockios.h> - -/* For setsockoptions(2) */ -#define SOL_SOCKET 1 - -#define SO_DEBUG 1 -#define SO_REUSEADDR 2 -#define SO_TYPE 3 -#define SO_ERROR 4 -#define SO_DONTROUTE 5 -#define SO_BROADCAST 6 -#define SO_SNDBUF 7 -#define SO_RCVBUF 8 -#define SO_SNDBUFFORCE 32 -#define SO_RCVBUFFORCE 33 -#define SO_KEEPALIVE 9 -#define SO_OOBINLINE 10 -#define SO_NO_CHECK 11 -#define SO_PRIORITY 12 -#define SO_LINGER 13 -#define SO_BSDCOMPAT 14 -/* To add :#define SO_REUSEPORT 15 */ -#define SO_PASSCRED 16 -#define SO_PEERCRED 17 -#define SO_RCVLOWAT 18 -#define SO_SNDLOWAT 19 -#define SO_RCVTIMEO 20 -#define SO_SNDTIMEO 21 - -/* Security levels - as per NRL IPv6 - don't actually do anything */ -#define SO_SECURITY_AUTHENTICATION 22 -#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 -#define SO_SECURITY_ENCRYPTION_NETWORK 24 - -#define SO_BINDTODEVICE 25 - -/* Socket filtering */ -#define SO_ATTACH_FILTER 26 -#define SO_DETACH_FILTER 27 - -#define SO_PEERNAME 28 -#define SO_TIMESTAMP 29 -#define SCM_TIMESTAMP SO_TIMESTAMP - -#define SO_ACCEPTCONN 30 -#define SO_PEERSEC 31 -#define SO_PASSSEC 34 -#define SO_TIMESTAMPNS 35 -#define SCM_TIMESTAMPNS SO_TIMESTAMPNS - -#define SO_MARK 36 - -#define SO_TIMESTAMPING 37 -#define SCM_TIMESTAMPING SO_TIMESTAMPING - -#endif /* _ASM_SOCKET_H */ +#include <asm-generic/socket.h> diff --git a/arch/blackfin/include/asm/sockios.h b/arch/blackfin/include/asm/sockios.h index 426b89b..def6d47 100644 --- a/arch/blackfin/include/asm/sockios.h +++ b/arch/blackfin/include/asm/sockios.h @@ -1,13 +1 @@ -#ifndef __ARCH_BFIN_SOCKIOS__ -#define __ARCH_BFIN_SOCKIOS__ - -/* Socket-level I/O control calls. */ -#define FIOSETOWN 0x8901 -#define SIOCSPGRP 0x8902 -#define FIOGETOWN 0x8903 -#define SIOCGPGRP 0x8904 -#define SIOCATMARK 0x8905 -#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */ -#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ - -#endif /* __ARCH_BFIN_SOCKIOS__ */ +#include <asm-generic/sockios.h> -- cgit v1.1 From 094167be1fe24a65ef1b4647b1ad22b3b7898621 Mon Sep 17 00:00:00 2001 From: Mike Frysinger <vapier@gentoo.org> Date: Sat, 13 Jun 2009 10:54:56 -0400 Subject: Blackfin: convert simple headers to asm-generic Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- arch/blackfin/include/asm/auxvec.h | 5 +---- arch/blackfin/include/asm/bugs.h | 17 +---------------- arch/blackfin/include/asm/cputime.h | 5 ----- arch/blackfin/include/asm/current.h | 24 +----------------------- arch/blackfin/include/asm/device.h | 6 ------ arch/blackfin/include/asm/emergency-restart.h | 5 ----- arch/blackfin/include/asm/errno.h | 7 +------ arch/blackfin/include/asm/fb.h | 13 +------------ arch/blackfin/include/asm/futex.h | 5 ----- arch/blackfin/include/asm/hw_irq.h | 7 +------ arch/blackfin/include/asm/kmap_types.h | 5 ----- arch/blackfin/include/asm/local.h | 5 ----- arch/blackfin/include/asm/param.h | 23 +---------------------- arch/blackfin/include/asm/percpu.h | 5 ----- arch/blackfin/include/asm/pgalloc.h | 9 +-------- arch/blackfin/include/asm/resource.h | 5 ----- arch/blackfin/include/asm/serial.h | 6 +----- arch/blackfin/include/asm/setup.h | 18 +----------------- arch/blackfin/include/asm/statfs.h | 5 ----- arch/blackfin/include/asm/topology.h | 5 ----- 20 files changed, 10 insertions(+), 170 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/include/asm/auxvec.h b/arch/blackfin/include/asm/auxvec.h index 215506c..41fa68b 100644 --- a/arch/blackfin/include/asm/auxvec.h +++ b/arch/blackfin/include/asm/auxvec.h @@ -1,4 +1 @@ -#ifndef __ASMBFIN_AUXVEC_H -#define __ASMBFIN_AUXVEC_H - -#endif +#include <asm-generic/auxvec.h> diff --git a/arch/blackfin/include/asm/bugs.h b/arch/blackfin/include/asm/bugs.h index 9093c9c..61791e1 100644 --- a/arch/blackfin/include/asm/bugs.h +++ b/arch/blackfin/include/asm/bugs.h @@ -1,16 +1 @@ -/* - * include/asm-blackfin/bugs.h - * - * Copyright (C) 1994 Linus Torvalds - */ - -/* - * This is included by init/main.c to check for architecture-dependent bugs. - * - * Needs: - * void check_bugs(void); - */ - -static void check_bugs(void) -{ -} +#include <asm-generic/bugs.h> diff --git a/arch/blackfin/include/asm/cputime.h b/arch/blackfin/include/asm/cputime.h index 2b19705..6d68ad7 100644 --- a/arch/blackfin/include/asm/cputime.h +++ b/arch/blackfin/include/asm/cputime.h @@ -1,6 +1 @@ -#ifndef __BLACKFIN_CPUTIME_H -#define __BLACKFIN_CPUTIME_H - #include <asm-generic/cputime.h> - -#endif /* __BLACKFIN_CPUTIME_H */ diff --git a/arch/blackfin/include/asm/current.h b/arch/blackfin/include/asm/current.h index 31918d2..4c51401 100644 --- a/arch/blackfin/include/asm/current.h +++ b/arch/blackfin/include/asm/current.h @@ -1,23 +1 @@ -#ifndef _BLACKFIN_CURRENT_H -#define _BLACKFIN_CURRENT_H -/* - * current.h - * (C) Copyright 2000, Lineo, David McCullough <davidm@lineo.com> - * - * rather than dedicate a register (as the m68k source does), we - * just keep a global, we should probably just change it all to be - * current and lose _current_task. - */ -#include <linux/thread_info.h> - -struct task_struct; - -static inline struct task_struct *get_current(void) __attribute__ ((__const__)); -static inline struct task_struct *get_current(void) -{ - return (current_thread_info()->task); -} - -#define current (get_current()) - -#endif /* _BLACKFIN_CURRENT_H */ +#include <asm-generic/current.h> diff --git a/arch/blackfin/include/asm/device.h b/arch/blackfin/include/asm/device.h index d8f9872..f0a4c25 100644 --- a/arch/blackfin/include/asm/device.h +++ b/arch/blackfin/include/asm/device.h @@ -1,7 +1 @@ -/* - * Arch specific extensions to struct device - * - * This file is released under the GPLv2 - */ #include <asm-generic/device.h> - diff --git a/arch/blackfin/include/asm/emergency-restart.h b/arch/blackfin/include/asm/emergency-restart.h index 27f6c78..3711bd9 100644 --- a/arch/blackfin/include/asm/emergency-restart.h +++ b/arch/blackfin/include/asm/emergency-restart.h @@ -1,6 +1 @@ -#ifndef _ASM_EMERGENCY_RESTART_H -#define _ASM_EMERGENCY_RESTART_H - #include <asm-generic/emergency-restart.h> - -#endif /* _ASM_EMERGENCY_RESTART_H */ diff --git a/arch/blackfin/include/asm/errno.h b/arch/blackfin/include/asm/errno.h index 164e4f3..4c82b50 100644 --- a/arch/blackfin/include/asm/errno.h +++ b/arch/blackfin/include/asm/errno.h @@ -1,6 +1 @@ -#ifndef _BFIN_ERRNO_H -#define _BFIN_ERRNO_H - -#include<asm-generic/errno.h> - -#endif /* _BFIN_ERRNO_H */ +#include <asm-generic/errno.h> diff --git a/arch/blackfin/include/asm/fb.h b/arch/blackfin/include/asm/fb.h index c7df380..3a4988e 100644 --- a/arch/blackfin/include/asm/fb.h +++ b/arch/blackfin/include/asm/fb.h @@ -1,12 +1 @@ -#ifndef _ASM_FB_H_ -#define _ASM_FB_H_ -#include <linux/fb.h> - -#define fb_pgprotect(...) do {} while (0) - -static inline int fb_is_primary_device(struct fb_info *info) -{ - return 0; -} - -#endif /* _ASM_FB_H_ */ +#include <asm-generic/fb.h> diff --git a/arch/blackfin/include/asm/futex.h b/arch/blackfin/include/asm/futex.h index 6a332a9..0b74582 100644 --- a/arch/blackfin/include/asm/futex.h +++ b/arch/blackfin/include/asm/futex.h @@ -1,6 +1 @@ -#ifndef _ASM_FUTEX_H -#define _ASM_FUTEX_H - #include <asm-generic/futex.h> - -#endif diff --git a/arch/blackfin/include/asm/hw_irq.h b/arch/blackfin/include/asm/hw_irq.h index 5b51eae..1f5ef7d 100644 --- a/arch/blackfin/include/asm/hw_irq.h +++ b/arch/blackfin/include/asm/hw_irq.h @@ -1,6 +1 @@ -#ifndef __ASM_BFIN_HW_IRQ_H -#define __ASM_BFIN_HW_IRQ_H - -/* Dummy include. */ - -#endif +#include <asm-generic/hw_irq.h> diff --git a/arch/blackfin/include/asm/kmap_types.h b/arch/blackfin/include/asm/kmap_types.h index 0a88622..3575c64 100644 --- a/arch/blackfin/include/asm/kmap_types.h +++ b/arch/blackfin/include/asm/kmap_types.h @@ -1,6 +1 @@ -#ifndef _ASM_KMAP_TYPES_H -#define _ASM_KMAP_TYPES_H - #include <asm-generic/kmap_types.h> - -#endif diff --git a/arch/blackfin/include/asm/local.h b/arch/blackfin/include/asm/local.h index 75afffb..c11c530 100644 --- a/arch/blackfin/include/asm/local.h +++ b/arch/blackfin/include/asm/local.h @@ -1,6 +1 @@ -#ifndef __BLACKFIN_LOCAL_H -#define __BLACKFIN_LOCAL_H - #include <asm-generic/local.h> - -#endif /* __BLACKFIN_LOCAL_H */ diff --git a/arch/blackfin/include/asm/param.h b/arch/blackfin/include/asm/param.h index 41564a6..965d454 100644 --- a/arch/blackfin/include/asm/param.h +++ b/arch/blackfin/include/asm/param.h @@ -1,22 +1 @@ -#ifndef _BLACKFIN_PARAM_H -#define _BLACKFIN_PARAM_H - -#ifdef __KERNEL__ -#define HZ CONFIG_HZ -#define USER_HZ 100 -#define CLOCKS_PER_SEC (USER_HZ) -#endif - -#ifndef HZ -#define HZ 100 -#endif - -#define EXEC_PAGESIZE 4096 - -#ifndef NOGROUP -#define NOGROUP (-1) -#endif - -#define MAXHOSTNAMELEN 64 /* max length of hostname */ - -#endif /* _BLACKFIN_PARAM_H */ +#include <asm-generic/param.h> diff --git a/arch/blackfin/include/asm/percpu.h b/arch/blackfin/include/asm/percpu.h index c94c7bc..06a959d 100644 --- a/arch/blackfin/include/asm/percpu.h +++ b/arch/blackfin/include/asm/percpu.h @@ -1,6 +1 @@ -#ifndef __ARCH_BLACKFIN_PERCPU__ -#define __ARCH_BLACKFIN_PERCPU__ - #include <asm-generic/percpu.h> - -#endif /* __ARCH_BLACKFIN_PERCPU__ */ diff --git a/arch/blackfin/include/asm/pgalloc.h b/arch/blackfin/include/asm/pgalloc.h index c686e05..f261cb7 100644 --- a/arch/blackfin/include/asm/pgalloc.h +++ b/arch/blackfin/include/asm/pgalloc.h @@ -1,8 +1 @@ -#ifndef _BLACKFIN_PGALLOC_H -#define _BLACKFIN_PGALLOC_H - -#include <asm/setup.h> - -#define check_pgt_cache() do { } while (0) - -#endif /* _BLACKFIN_PGALLOC_H */ +#include <asm-generic/pgalloc.h> diff --git a/arch/blackfin/include/asm/resource.h b/arch/blackfin/include/asm/resource.h index 091355a..04bc4db 100644 --- a/arch/blackfin/include/asm/resource.h +++ b/arch/blackfin/include/asm/resource.h @@ -1,6 +1 @@ -#ifndef _BFIN_RESOURCE_H -#define _BFIN_RESOURCE_H - #include <asm-generic/resource.h> - -#endif /* _BFIN_RESOURCE_H */ diff --git a/arch/blackfin/include/asm/serial.h b/arch/blackfin/include/asm/serial.h index 3a47606..94a4a12 100644 --- a/arch/blackfin/include/asm/serial.h +++ b/arch/blackfin/include/asm/serial.h @@ -1,6 +1,2 @@ -/* - * include/asm-blackfin/serial.h - */ - +#include <asm-generic/serial.h> #define SERIAL_EXTRA_IRQ_FLAGS IRQF_TRIGGER_HIGH -#define BASE_BAUD (1843200 / 16) diff --git a/arch/blackfin/include/asm/setup.h b/arch/blackfin/include/asm/setup.h index 01c8c6c..552df83 100644 --- a/arch/blackfin/include/asm/setup.h +++ b/arch/blackfin/include/asm/setup.h @@ -1,17 +1 @@ -/* -** asm/setup.h -- Definition of the Linux/bfin setup information -** -** This file is subject to the terms and conditions of the GNU General Public -** License. See the file COPYING in the main directory of this archive -** for more details. -** -** Copyright Lineo, Inc 2001 Tony Kou -** -*/ - -#ifndef _BFIN_SETUP_H -#define _BFIN_SETUP_H - -#define COMMAND_LINE_SIZE 512 - -#endif /* _BFIN_SETUP_H */ +#include <asm-generic/setup.h> diff --git a/arch/blackfin/include/asm/statfs.h b/arch/blackfin/include/asm/statfs.h index 3506720..0b91fe1 100644 --- a/arch/blackfin/include/asm/statfs.h +++ b/arch/blackfin/include/asm/statfs.h @@ -1,6 +1 @@ -#ifndef _BFIN_STATFS_H -#define _BFIN_STATFS_H - #include <asm-generic/statfs.h> - -#endif /* _BFIN_STATFS_H */ diff --git a/arch/blackfin/include/asm/topology.h b/arch/blackfin/include/asm/topology.h index acee239..5428f33 100644 --- a/arch/blackfin/include/asm/topology.h +++ b/arch/blackfin/include/asm/topology.h @@ -1,6 +1 @@ -#ifndef _ASM_BLACKFIN_TOPOLOGY_H -#define _ASM_BLACKFIN_TOPOLOGY_H - #include <asm-generic/topology.h> - -#endif /* _ASM_BLACKFIN_TOPOLOGY_H */ -- cgit v1.1 From 22a151c1bcfe28d8d9aea515155b2d5edada9811 Mon Sep 17 00:00:00 2001 From: Mike Frysinger <vapier@gentoo.org> Date: Sat, 13 Jun 2009 11:12:08 -0400 Subject: Blackfin: convert termios to asm-generic Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- arch/blackfin/include/asm/termbits.h | 199 +---------------------------------- arch/blackfin/include/asm/termios.h | 95 +---------------- 2 files changed, 2 insertions(+), 292 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/include/asm/termbits.h b/arch/blackfin/include/asm/termbits.h index f37feb7..3935b10 100644 --- a/arch/blackfin/include/asm/termbits.h +++ b/arch/blackfin/include/asm/termbits.h @@ -1,198 +1 @@ -#ifndef __ARCH_BFIN_TERMBITS_H__ -#define __ARCH_BFIN_TERMBITS_H__ - -#include <linux/posix_types.h> - -typedef unsigned char cc_t; -typedef unsigned int speed_t; -typedef unsigned int tcflag_t; - -#define NCCS 19 -struct termios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ -}; - -struct termios2 { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -struct ktermios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -/* c_cc characters */ -#define VINTR 0 -#define VQUIT 1 -#define VERASE 2 -#define VKILL 3 -#define VEOF 4 -#define VTIME 5 -#define VMIN 6 -#define VSWTC 7 -#define VSTART 8 -#define VSTOP 9 -#define VSUSP 10 -#define VEOL 11 -#define VREPRINT 12 -#define VDISCARD 13 -#define VWERASE 14 -#define VLNEXT 15 -#define VEOL2 16 - -/* c_iflag bits */ -#define IGNBRK 0000001 -#define BRKINT 0000002 -#define IGNPAR 0000004 -#define PARMRK 0000010 -#define INPCK 0000020 -#define ISTRIP 0000040 -#define INLCR 0000100 -#define IGNCR 0000200 -#define ICRNL 0000400 -#define IUCLC 0001000 -#define IXON 0002000 -#define IXANY 0004000 -#define IXOFF 0010000 -#define IMAXBEL 0020000 -#define IUTF8 0040000 - -/* c_oflag bits */ -#define OPOST 0000001 -#define OLCUC 0000002 -#define ONLCR 0000004 -#define OCRNL 0000010 -#define ONOCR 0000020 -#define ONLRET 0000040 -#define OFILL 0000100 -#define OFDEL 0000200 -#define NLDLY 0000400 -#define NL0 0000000 -#define NL1 0000400 -#define CRDLY 0003000 -#define CR0 0000000 -#define CR1 0001000 -#define CR2 0002000 -#define CR3 0003000 -#define TABDLY 0014000 -#define TAB0 0000000 -#define TAB1 0004000 -#define TAB2 0010000 -#define TAB3 0014000 -#define XTABS 0014000 -#define BSDLY 0020000 -#define BS0 0000000 -#define BS1 0020000 -#define VTDLY 0040000 -#define VT0 0000000 -#define VT1 0040000 -#define FFDLY 0100000 -#define FF0 0000000 -#define FF1 0100000 - -/* c_cflag bit meaning */ -#define CBAUD 0010017 -#define B0 0000000 /* hang up */ -#define B50 0000001 -#define B75 0000002 -#define B110 0000003 -#define B134 0000004 -#define B150 0000005 -#define B200 0000006 -#define B300 0000007 -#define B600 0000010 -#define B1200 0000011 -#define B1800 0000012 -#define B2400 0000013 -#define B4800 0000014 -#define B9600 0000015 -#define B19200 0000016 -#define B38400 0000017 -#define EXTA B19200 -#define EXTB B38400 -#define CSIZE 0000060 -#define CS5 0000000 -#define CS6 0000020 -#define CS7 0000040 -#define CS8 0000060 -#define CSTOPB 0000100 -#define CREAD 0000200 -#define PARENB 0000400 -#define PARODD 0001000 -#define HUPCL 0002000 -#define CLOCAL 0004000 -#define CBAUDEX 0010000 -#define BOTHER 0010000 -#define B57600 0010001 -#define B115200 0010002 -#define B230400 0010003 -#define B460800 0010004 -#define B500000 0010005 -#define B576000 0010006 -#define B921600 0010007 -#define B1000000 0010010 -#define B1152000 0010011 -#define B1500000 0010012 -#define B2000000 0010013 -#define B2500000 0010014 -#define B3000000 0010015 -#define B3500000 0010016 -#define B4000000 0010017 -#define CIBAUD 002003600000 /* input baud rate */ -#define CMSPAR 010000000000 /* mark or space (stick) parity */ -#define CRTSCTS 020000000000 /* flow control */ - -#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ - -/* c_lflag bits */ -#define ISIG 0000001 -#define ICANON 0000002 -#define XCASE 0000004 -#define ECHO 0000010 -#define ECHOE 0000020 -#define ECHOK 0000040 -#define ECHONL 0000100 -#define NOFLSH 0000200 -#define TOSTOP 0000400 -#define ECHOCTL 0001000 -#define ECHOPRT 0002000 -#define ECHOKE 0004000 -#define FLUSHO 0010000 -#define PENDIN 0040000 -#define IEXTEN 0100000 - -/* tcflow() and TCXONC use these */ -#define TCOOFF 0 -#define TCOON 1 -#define TCIOFF 2 -#define TCION 3 - -/* tcflush() and TCFLSH use these */ -#define TCIFLUSH 0 -#define TCOFLUSH 1 -#define TCIOFLUSH 2 - -/* tcsetattr uses these */ -#define TCSANOW 0 -#define TCSADRAIN 1 -#define TCSAFLUSH 2 - -#endif /* __ARCH_BFIN_TERMBITS_H__ */ +#include <asm-generic/termbits.h> diff --git a/arch/blackfin/include/asm/termios.h b/arch/blackfin/include/asm/termios.h index d50d063..280d78a 100644 --- a/arch/blackfin/include/asm/termios.h +++ b/arch/blackfin/include/asm/termios.h @@ -1,94 +1 @@ -#ifndef __BFIN_TERMIOS_H__ -#define __BFIN_TERMIOS_H__ - -#include <asm/termbits.h> -#include <asm/ioctls.h> - -struct winsize { - unsigned short ws_row; - unsigned short ws_col; - unsigned short ws_xpixel; - unsigned short ws_ypixel; -}; - -#define NCC 8 -struct termio { - unsigned short c_iflag; /* input mode flags */ - unsigned short c_oflag; /* output mode flags */ - unsigned short c_cflag; /* control mode flags */ - unsigned short c_lflag; /* local mode flags */ - unsigned char c_line; /* line discipline */ - unsigned char c_cc[NCC]; /* control characters */ -}; - -/* modem lines */ -#define TIOCM_LE 0x001 -#define TIOCM_DTR 0x002 -#define TIOCM_RTS 0x004 -#define TIOCM_ST 0x008 -#define TIOCM_SR 0x010 -#define TIOCM_CTS 0x020 -#define TIOCM_CAR 0x040 -#define TIOCM_RNG 0x080 -#define TIOCM_DSR 0x100 -#define TIOCM_CD TIOCM_CAR -#define TIOCM_RI TIOCM_RNG -#define TIOCM_OUT1 0x2000 -#define TIOCM_OUT2 0x4000 -#define TIOCM_LOOP 0x8000 - -/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ - -#ifdef __KERNEL__ - -/* intr=^C quit=^\ erase=del kill=^U - eof=^D vtime=\0 vmin=\1 sxtc=\0 - start=^Q stop=^S susp=^Z eol=\0 - reprint=^R discard=^U werase=^W lnext=^V - eol2=\0 -*/ -#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" - -/* - * Translate a "termio" structure into a "termios". Ugh. - */ -#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \ - unsigned short __tmp; \ - get_user(__tmp,&(termio)->x); \ - *(unsigned short *) &(termios)->x = __tmp; \ -} - -#define user_termio_to_kernel_termios(termios, termio) \ -({ \ - SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \ - copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \ -}) - -/* - * Translate a "termios" structure into a "termio". Ugh. - */ -#define kernel_termios_to_user_termio(termio, termios) \ -({ \ - put_user((termios)->c_iflag, &(termio)->c_iflag); \ - put_user((termios)->c_oflag, &(termio)->c_oflag); \ - put_user((termios)->c_cflag, &(termio)->c_cflag); \ - put_user((termios)->c_lflag, &(termio)->c_lflag); \ - put_user((termios)->c_line, &(termio)->c_line); \ - copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ -}) - -#define user_termios_to_kernel_termios(k, u) \ - copy_from_user(k, u, sizeof(struct termios2)) -#define kernel_termios_to_user_termios(u, k) \ - copy_to_user(u, k, sizeof(struct termios2)) -#define user_termios_to_kernel_termios_1(k, u) \ - copy_from_user(k, u, sizeof(struct termios)) -#define kernel_termios_to_user_termios_1(u, k) \ - copy_to_user(u, k, sizeof(struct termios)) - -#endif /* __KERNEL__ */ - -#endif /* __BFIN_TERMIOS_H__ */ +#include <asm-generic/termios.h> -- cgit v1.1 From 3d150630930c500926bd80d2c07872c9f0ee5db8 Mon Sep 17 00:00:00 2001 From: Mike Frysinger <vapier@gentoo.org> Date: Sat, 13 Jun 2009 11:21:51 -0400 Subject: Blackfin: convert locking primitives to asm-generic Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- arch/blackfin/include/asm/atomic.h | 109 ++----------------- arch/blackfin/include/asm/bitops.h | 198 ++-------------------------------- arch/blackfin/include/asm/mutex.h | 2 +- arch/blackfin/include/asm/spinlock.h | 6 ++ arch/blackfin/include/asm/swab.h | 6 +- arch/blackfin/include/asm/unaligned.h | 12 +-- 6 files changed, 25 insertions(+), 308 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/include/asm/atomic.h b/arch/blackfin/include/asm/atomic.h index b1d92f1..88f36d5 100644 --- a/arch/blackfin/include/asm/atomic.h +++ b/arch/blackfin/include/asm/atomic.h @@ -1,24 +1,21 @@ #ifndef __ARCH_BLACKFIN_ATOMIC__ #define __ARCH_BLACKFIN_ATOMIC__ +#ifndef CONFIG_SMP +# include <asm-generic/atomic.h> +#else + #include <linux/types.h> #include <asm/system.h> /* local_irq_XXX() */ /* * Atomic operations that C can't guarantee us. Useful for * resource counting etc.. - * - * Generally we do not concern about SMP BFIN systems, so we don't have - * to deal with that. - * - * Tony Kou (tonyko@lineo.ca) Lineo Inc. 2001 */ #define ATOMIC_INIT(i) { (i) } #define atomic_set(v, i) (((v)->counter) = i) -#ifdef CONFIG_SMP - #define atomic_read(v) __raw_uncached_fetch_asm(&(v)->counter) asmlinkage int __raw_uncached_fetch_asm(const volatile int *ptr); @@ -84,100 +81,6 @@ static inline int atomic_test_mask(int mask, atomic_t *v) #define smp_mb__before_atomic_inc() barrier() #define smp_mb__after_atomic_inc() barrier() -#else /* !CONFIG_SMP */ - -#define atomic_read(v) ((v)->counter) - -static inline void atomic_add(int i, atomic_t *v) -{ - unsigned long flags; - - local_irq_save_hw(flags); - v->counter += i; - local_irq_restore_hw(flags); -} - -static inline void atomic_sub(int i, atomic_t *v) -{ - unsigned long flags; - - local_irq_save_hw(flags); - v->counter -= i; - local_irq_restore_hw(flags); - -} - -static inline int atomic_add_return(int i, atomic_t *v) -{ - int __temp = 0; - unsigned long flags; - - local_irq_save_hw(flags); - v->counter += i; - __temp = v->counter; - local_irq_restore_hw(flags); - - - return __temp; -} - -static inline int atomic_sub_return(int i, atomic_t *v) -{ - int __temp = 0; - unsigned long flags; - - local_irq_save_hw(flags); - v->counter -= i; - __temp = v->counter; - local_irq_restore_hw(flags); - - return __temp; -} - -static inline void atomic_inc(volatile atomic_t *v) -{ - unsigned long flags; - - local_irq_save_hw(flags); - v->counter++; - local_irq_restore_hw(flags); -} - -static inline void atomic_dec(volatile atomic_t *v) -{ - unsigned long flags; - - local_irq_save_hw(flags); - v->counter--; - local_irq_restore_hw(flags); -} - -static inline void atomic_clear_mask(unsigned int mask, atomic_t *v) -{ - unsigned long flags; - - local_irq_save_hw(flags); - v->counter &= ~mask; - local_irq_restore_hw(flags); -} - -static inline void atomic_set_mask(unsigned int mask, atomic_t *v) -{ - unsigned long flags; - - local_irq_save_hw(flags); - v->counter |= mask; - local_irq_restore_hw(flags); -} - -/* Atomic operations are already serializing */ -#define smp_mb__before_atomic_dec() barrier() -#define smp_mb__after_atomic_dec() barrier() -#define smp_mb__before_atomic_inc() barrier() -#define smp_mb__after_atomic_inc() barrier() - -#endif /* !CONFIG_SMP */ - #define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0) #define atomic_dec_return(v) atomic_sub_return(1,(v)) #define atomic_inc_return(v) atomic_add_return(1,(v)) @@ -210,4 +113,6 @@ static inline void atomic_set_mask(unsigned int mask, atomic_t *v) #include <asm-generic/atomic-long.h> -#endif /* __ARCH_BLACKFIN_ATOMIC __ */ +#endif + +#endif diff --git a/arch/blackfin/include/asm/bitops.h b/arch/blackfin/include/asm/bitops.h index 75fee2f..daffa71 100644 --- a/arch/blackfin/include/asm/bitops.h +++ b/arch/blackfin/include/asm/bitops.h @@ -1,26 +1,22 @@ #ifndef _BLACKFIN_BITOPS_H #define _BLACKFIN_BITOPS_H -/* - * Copyright 1992, Linus Torvalds. - */ - -#include <linux/compiler.h> -#include <asm/byteorder.h> /* swab32 */ - -#ifdef __KERNEL__ +#ifndef CONFIG_SMP +# include <asm-generic/bitops.h> +#else #ifndef _LINUX_BITOPS_H #error only <linux/bitops.h> can be included directly #endif +#include <linux/compiler.h> +#include <asm/byteorder.h> /* swab32 */ + #include <asm-generic/bitops/ffs.h> #include <asm-generic/bitops/__ffs.h> #include <asm-generic/bitops/sched.h> #include <asm-generic/bitops/ffz.h> -#ifdef CONFIG_SMP - #include <linux/linkage.h> asmlinkage int __raw_bit_set_asm(volatile unsigned long *addr, int nr); @@ -79,189 +75,13 @@ static inline int test_and_change_bit(int nr, volatile unsigned long *addr) return __raw_bit_test_toggle_asm(a, nr & 0x1f); } -#else /* !CONFIG_SMP */ - -#include <asm/system.h> /* save_flags */ - -static inline void set_bit(int nr, volatile unsigned long *addr) -{ - int *a = (int *)addr; - int mask; - unsigned long flags; - a += nr >> 5; - mask = 1 << (nr & 0x1f); - local_irq_save_hw(flags); - *a |= mask; - local_irq_restore_hw(flags); -} - -static inline void clear_bit(int nr, volatile unsigned long *addr) -{ - int *a = (int *)addr; - int mask; - unsigned long flags; - a += nr >> 5; - mask = 1 << (nr & 0x1f); - local_irq_save_hw(flags); - *a &= ~mask; - local_irq_restore_hw(flags); -} - -static inline void change_bit(int nr, volatile unsigned long *addr) -{ - int mask; - unsigned long flags; - unsigned long *ADDR = (unsigned long *)addr; - - ADDR += nr >> 5; - mask = 1 << (nr & 31); - local_irq_save_hw(flags); - *ADDR ^= mask; - local_irq_restore_hw(flags); -} - -static inline int test_and_set_bit(int nr, volatile unsigned long *addr) -{ - int mask, retval; - volatile unsigned int *a = (volatile unsigned int *)addr; - unsigned long flags; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - local_irq_save_hw(flags); - retval = (mask & *a) != 0; - *a |= mask; - local_irq_restore_hw(flags); - - return retval; -} - -static inline int test_and_clear_bit(int nr, volatile unsigned long *addr) -{ - int mask, retval; - volatile unsigned int *a = (volatile unsigned int *)addr; - unsigned long flags; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - local_irq_save_hw(flags); - retval = (mask & *a) != 0; - *a &= ~mask; - local_irq_restore_hw(flags); - - return retval; -} - -static inline int test_and_change_bit(int nr, volatile unsigned long *addr) -{ - int mask, retval; - volatile unsigned int *a = (volatile unsigned int *)addr; - unsigned long flags; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - local_irq_save_hw(flags); - retval = (mask & *a) != 0; - *a ^= mask; - local_irq_restore_hw(flags); - return retval; -} - -#endif /* CONFIG_SMP */ - /* * clear_bit() doesn't provide any barrier for the compiler. */ #define smp_mb__before_clear_bit() barrier() #define smp_mb__after_clear_bit() barrier() -static inline void __set_bit(int nr, volatile unsigned long *addr) -{ - int *a = (int *)addr; - int mask; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - *a |= mask; -} - -static inline void __clear_bit(int nr, volatile unsigned long *addr) -{ - int *a = (int *)addr; - int mask; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - *a &= ~mask; -} - -static inline void __change_bit(int nr, volatile unsigned long *addr) -{ - int mask; - unsigned long *ADDR = (unsigned long *)addr; - - ADDR += nr >> 5; - mask = 1 << (nr & 31); - *ADDR ^= mask; -} - -static inline int __test_and_set_bit(int nr, volatile unsigned long *addr) -{ - int mask, retval; - volatile unsigned int *a = (volatile unsigned int *)addr; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - retval = (mask & *a) != 0; - *a |= mask; - return retval; -} - -static inline int __test_and_clear_bit(int nr, volatile unsigned long *addr) -{ - int mask, retval; - volatile unsigned int *a = (volatile unsigned int *)addr; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - retval = (mask & *a) != 0; - *a &= ~mask; - return retval; -} - -static inline int __test_and_change_bit(int nr, - volatile unsigned long *addr) -{ - int mask, retval; - volatile unsigned int *a = (volatile unsigned int *)addr; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - retval = (mask & *a) != 0; - *a ^= mask; - return retval; -} - -static inline int __test_bit(int nr, const void *addr) -{ - int *a = (int *)addr; - int mask; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - return ((mask & *a) != 0); -} - -#ifndef CONFIG_SMP -/* - * This routine doesn't need irq save and restore ops in UP - * context. - */ -static inline int test_bit(int nr, const void *addr) -{ - return __test_bit(nr, addr); -} -#endif +#include <asm-generic/bitops/non-atomic.h> #include <asm-generic/bitops/find.h> #include <asm-generic/bitops/hweight.h> @@ -272,10 +92,10 @@ static inline int test_bit(int nr, const void *addr) #include <asm-generic/bitops/minix.h> -#endif /* __KERNEL__ */ - #include <asm-generic/bitops/fls.h> #include <asm-generic/bitops/__fls.h> #include <asm-generic/bitops/fls64.h> +#endif /* CONFIG_SMP */ + #endif /* _BLACKFIN_BITOPS_H */ diff --git a/arch/blackfin/include/asm/mutex.h b/arch/blackfin/include/asm/mutex.h index 5d39925..5cc641c 100644 --- a/arch/blackfin/include/asm/mutex.h +++ b/arch/blackfin/include/asm/mutex.h @@ -10,7 +10,7 @@ #define _ASM_MUTEX_H #ifndef CONFIG_SMP -#include <asm-generic/mutex-dec.h> +#include <asm-generic/mutex.h> #else static inline void diff --git a/arch/blackfin/include/asm/spinlock.h b/arch/blackfin/include/asm/spinlock.h index 0249ac3..d6ff4b5 100644 --- a/arch/blackfin/include/asm/spinlock.h +++ b/arch/blackfin/include/asm/spinlock.h @@ -1,6 +1,10 @@ #ifndef __BFIN_SPINLOCK_H #define __BFIN_SPINLOCK_H +#ifndef CONFIG_SMP +# include <asm-generic/spinlock.h> +#else + #include <asm/atomic.h> asmlinkage int __raw_spin_is_locked_asm(volatile int *ptr); @@ -86,4 +90,6 @@ static inline void __raw_write_unlock(raw_rwlock_t *rw) #define _raw_read_relax(lock) cpu_relax() #define _raw_write_relax(lock) cpu_relax() +#endif + #endif /* !__BFIN_SPINLOCK_H */ diff --git a/arch/blackfin/include/asm/swab.h b/arch/blackfin/include/asm/swab.h index 6403ad2..d442113 100644 --- a/arch/blackfin/include/asm/swab.h +++ b/arch/blackfin/include/asm/swab.h @@ -2,11 +2,7 @@ #define _BLACKFIN_SWAB_H #include <linux/types.h> -#include <linux/compiler.h> - -#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__) -# define __SWAB_64_THRU_32__ -#endif +#include <asm-generic/swab.h> #ifdef __GNUC__ diff --git a/arch/blackfin/include/asm/unaligned.h b/arch/blackfin/include/asm/unaligned.h index fd8a1d6..6cecbbb 100644 --- a/arch/blackfin/include/asm/unaligned.h +++ b/arch/blackfin/include/asm/unaligned.h @@ -1,11 +1 @@ -#ifndef _ASM_BLACKFIN_UNALIGNED_H -#define _ASM_BLACKFIN_UNALIGNED_H - -#include <linux/unaligned/le_struct.h> -#include <linux/unaligned/be_byteshift.h> -#include <linux/unaligned/generic.h> - -#define get_unaligned __get_unaligned_le -#define put_unaligned __put_unaligned_le - -#endif /* _ASM_BLACKFIN_UNALIGNED_H */ +#include <asm-generic/unaligned.h> -- cgit v1.1 From 415f92da756423d564971b3e7afd1e2a54c9b7b0 Mon Sep 17 00:00:00 2001 From: Mike Frysinger <vapier@gentoo.org> Date: Sat, 13 Jun 2009 11:26:57 -0400 Subject: Blackfin: convert signal/mmap to asm-generic Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- arch/blackfin/include/asm/mman.h | 44 +--------- arch/blackfin/include/asm/signal.h | 159 +------------------------------------ 2 files changed, 4 insertions(+), 199 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/include/asm/mman.h b/arch/blackfin/include/asm/mman.h index b58f5ad..8eebf89 100644 --- a/arch/blackfin/include/asm/mman.h +++ b/arch/blackfin/include/asm/mman.h @@ -1,43 +1 @@ -#ifndef __BFIN_MMAN_H__ -#define __BFIN_MMAN_H__ - -#define PROT_READ 0x1 /* page can be read */ -#define PROT_WRITE 0x2 /* page can be written */ -#define PROT_EXEC 0x4 /* page can be executed */ -#define PROT_SEM 0x8 /* page may be used for atomic ops */ -#define PROT_NONE 0x0 /* page can not be accessed */ -#define PROT_GROWSDOWN 0x01000000 /* mprotect flag: extend change to start of growsdown vma */ -#define PROT_GROWSUP 0x02000000 /* mprotect flag: extend change to end of growsup vma */ - -#define MAP_SHARED 0x01 /* Share changes */ -#define MAP_PRIVATE 0x02 /* Changes are private */ -#define MAP_TYPE 0x0f /* Mask for type of mapping */ -#define MAP_FIXED 0x10 /* Interpret addr exactly */ -#define MAP_ANONYMOUS 0x20 /* don't use a file */ - -#define MAP_GROWSDOWN 0x0100 /* stack-like segment */ -#define MAP_DENYWRITE 0x0800 /* ETXTBSY */ -#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */ -#define MAP_LOCKED 0x2000 /* pages are locked */ -#define MAP_NORESERVE 0x4000 /* don't check for reservations */ -#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */ -#define MAP_NONBLOCK 0x10000 /* do not block on IO */ - -#define MS_ASYNC 1 /* sync memory asynchronously */ -#define MS_INVALIDATE 2 /* invalidate the caches */ -#define MS_SYNC 4 /* synchronous memory sync */ - -#define MCL_CURRENT 1 /* lock all current mappings */ -#define MCL_FUTURE 2 /* lock all future mappings */ - -#define MADV_NORMAL 0x0 /* default page-in behavior */ -#define MADV_RANDOM 0x1 /* page-in minimum required */ -#define MADV_SEQUENTIAL 0x2 /* read-ahead aggressively */ -#define MADV_WILLNEED 0x3 /* pre-fault pages */ -#define MADV_DONTNEED 0x4 /* discard these pages */ - -/* compatibility flags */ -#define MAP_ANON MAP_ANONYMOUS -#define MAP_FILE 0 - -#endif /* __BFIN_MMAN_H__ */ +#include <asm-generic/mman.h> diff --git a/arch/blackfin/include/asm/signal.h b/arch/blackfin/include/asm/signal.h index 2eea907..77a3bf3 100644 --- a/arch/blackfin/include/asm/signal.h +++ b/arch/blackfin/include/asm/signal.h @@ -1,160 +1,7 @@ #ifndef _BLACKFIN_SIGNAL_H #define _BLACKFIN_SIGNAL_H -#include <linux/types.h> +#define SA_RESTORER 0x04000000 +#include <asm-generic/signal.h> -/* Avoid too many header ordering problems. */ -struct siginfo; - -#ifdef __KERNEL__ -/* Most things should be clean enough to redefine this at will, if care - is taken to make libc match. */ - -#define _NSIG 64 -#define _NSIG_BPW 32 -#define _NSIG_WORDS (_NSIG / _NSIG_BPW) - -typedef unsigned long old_sigset_t; /* at least 32 bits */ - -typedef struct { - unsigned long sig[_NSIG_WORDS]; -} sigset_t; - -#else -/* Here we must cater to libcs that poke about in kernel headers. */ - -#define NSIG 32 -typedef unsigned long sigset_t; - -#endif /* __KERNEL__ */ - -#define SIGHUP 1 -#define SIGINT 2 -#define SIGQUIT 3 -#define SIGILL 4 -#define SIGTRAP 5 -#define SIGABRT 6 -#define SIGIOT 6 -#define SIGBUS 7 -#define SIGFPE 8 -#define SIGKILL 9 -#define SIGUSR1 10 -#define SIGSEGV 11 -#define SIGUSR2 12 -#define SIGPIPE 13 -#define SIGALRM 14 -#define SIGTERM 15 -#define SIGSTKFLT 16 -#define SIGCHLD 17 -#define SIGCONT 18 -#define SIGSTOP 19 -#define SIGTSTP 20 -#define SIGTTIN 21 -#define SIGTTOU 22 -#define SIGURG 23 -#define SIGXCPU 24 -#define SIGXFSZ 25 -#define SIGVTALRM 26 -#define SIGPROF 27 -#define SIGWINCH 28 -#define SIGIO 29 -#define SIGPOLL SIGIO -/* -#define SIGLOST 29 -*/ -#define SIGPWR 30 -#define SIGSYS 31 -#define SIGUNUSED 31 - -/* These should not be considered constants from userland. */ -#define SIGRTMIN 32 -#define SIGRTMAX _NSIG - -/* - * SA_FLAGS values: - * - * SA_ONSTACK indicates that a registered stack_t will be used. - * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the - * SA_RESTART flag to get restarting signals (which were the default long ago) - * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. - * SA_RESETHAND clears the handler when the signal is delivered. - * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. - * SA_NODEFER prevents the current signal from being masked in the handler. - * - * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single - * Unix names RESETHAND and NODEFER respectively. - */ -#define SA_NOCLDSTOP 0x00000001 -#define SA_NOCLDWAIT 0x00000002 /* not supported yet */ -#define SA_SIGINFO 0x00000004 -#define SA_ONSTACK 0x08000000 -#define SA_RESTART 0x10000000 -#define SA_NODEFER 0x40000000 -#define SA_RESETHAND 0x80000000 - -#define SA_NOMASK SA_NODEFER -#define SA_ONESHOT SA_RESETHAND - -/* - * sigaltstack controls - */ -#define SS_ONSTACK 1 -#define SS_DISABLE 2 - -#define MINSIGSTKSZ 2048 -#define SIGSTKSZ 8192 - -#include <asm-generic/signal-defs.h> - -#ifdef __KERNEL__ -struct old_sigaction { - __sighandler_t sa_handler; - old_sigset_t sa_mask; - unsigned long sa_flags; - void (*sa_restorer) (void); -}; - -struct sigaction { - __sighandler_t sa_handler; - unsigned long sa_flags; - void (*sa_restorer) (void); - sigset_t sa_mask; /* mask last for extensibility */ -}; - -struct k_sigaction { - struct sigaction sa; -}; -#else -/* Here we must cater to libcs that poke about in kernel headers. */ - -struct sigaction { - union { - __sighandler_t _sa_handler; - void (*_sa_sigaction) (int, struct siginfo *, void *); - } _u; - sigset_t sa_mask; - unsigned long sa_flags; - void (*sa_restorer) (void); -}; - -#define sa_handler _u._sa_handler -#define sa_sigaction _u._sa_sigaction - -#endif /* __KERNEL__ */ - -typedef struct sigaltstack { - void __user *ss_sp; - int ss_flags; - size_t ss_size; -} stack_t; - -#ifdef __KERNEL__ - -#include <asm/sigcontext.h> -#undef __HAVE_ARCH_SIG_BITOPS - -#define ptrace_signal_deliver(regs, cookie) do { } while (0) - -#endif /* __KERNEL__ */ - -#endif /* _BLACKFIN_SIGNAL_H */ +#endif -- cgit v1.1 From d5ce528c8e46fa5afb9ff021514a6658d1758b4e Mon Sep 17 00:00:00 2001 From: Mike Frysinger <vapier@gentoo.org> Date: Sat, 13 Jun 2009 11:32:34 -0400 Subject: Blackfin: convert irq/process to asm-generic Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- arch/blackfin/include/asm/hardirq.h | 42 +++-------------------------------- arch/blackfin/include/asm/irq.h | 5 +---- arch/blackfin/include/asm/processor.h | 35 +++-------------------------- arch/blackfin/kernel/process.c | 23 +++++++++++++++++++ 4 files changed, 30 insertions(+), 75 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/include/asm/hardirq.h b/arch/blackfin/include/asm/hardirq.h index 717181a..cbd52f8 100644 --- a/arch/blackfin/include/asm/hardirq.h +++ b/arch/blackfin/include/asm/hardirq.h @@ -1,47 +1,11 @@ #ifndef __BFIN_HARDIRQ_H #define __BFIN_HARDIRQ_H -#include <linux/cache.h> -#include <linux/threads.h> -#include <asm/irq.h> - -typedef struct { - unsigned int __softirq_pending; - unsigned int __syscall_count; - struct task_struct *__ksoftirqd_task; -} ____cacheline_aligned irq_cpustat_t; - -#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */ - -/* - * We put the hardirq and softirq counter into the preemption - * counter. The bitmask has the following meaning: - * - * - bits 0-7 are the preemption count (max preemption depth: 256) - * - bits 8-15 are the softirq count (max # of softirqs: 256) - * - bits 16-23 are the hardirq count (max # of hardirqs: 256) - * - * - ( bit 26 is the PREEMPT_ACTIVE flag. ) - * - * PREEMPT_MASK: 0x000000ff - * HARDIRQ_MASK: 0x0000ff00 - * SOFTIRQ_MASK: 0x00ff0000 - */ - -#if NR_IRQS > 256 -#define HARDIRQ_BITS 9 -#else -#define HARDIRQ_BITS 8 -#endif - -#ifdef NR_IRQS -# if (1 << HARDIRQ_BITS) < NR_IRQS -# error HARDIRQ_BITS is too low! -# endif -#endif - #define __ARCH_IRQ_EXIT_IRQS_DISABLED 1 extern void ack_bad_irq(unsigned int irq); +#define ack_bad_irq ack_bad_irq + +#include <asm-generic/hardirq.h> #endif diff --git a/arch/blackfin/include/asm/irq.h b/arch/blackfin/include/asm/irq.h index 400bdd5..9a7f63a 100644 --- a/arch/blackfin/include/asm/irq.h +++ b/arch/blackfin/include/asm/irq.h @@ -45,9 +45,6 @@ : "d" (bfin_irq_flags) \ ) -static inline int irq_canonicalize(int irq) -{ - return irq; -} +#include <asm-generic/irq.h> #endif /* _BFIN_IRQ_H_ */ diff --git a/arch/blackfin/include/asm/processor.h b/arch/blackfin/include/asm/processor.h index 3040415..d0be99b 100644 --- a/arch/blackfin/include/asm/processor.h +++ b/arch/blackfin/include/asm/processor.h @@ -7,9 +7,8 @@ */ #define current_text_addr() ({ __label__ _l; _l: &&_l;}) +#include <asm/ptrace.h> #include <asm/blackfin.h> -#include <asm/segment.h> -#include <linux/compiler.h> static inline unsigned long rdusp(void) { @@ -59,36 +58,8 @@ struct thread_struct { PS_S, 0, 0 \ } -/* - * Do necessary setup to start up a newly executed thread. - * - * pass the data segment into user programs if it exists, - * it can't hurt anything as far as I can tell - */ -#ifndef CONFIG_SMP -#define start_thread(_regs, _pc, _usp) \ -do { \ - set_fs(USER_DS); \ - (_regs)->pc = (_pc); \ - if (current->mm) \ - (_regs)->p5 = current->mm->start_data; \ - task_thread_info(current)->l1_task_info.stack_start \ - = (void *)current->mm->context.stack_start; \ - task_thread_info(current)->l1_task_info.lowest_sp = (void *)(_usp); \ - memcpy(L1_SCRATCH_TASK_INFO, &task_thread_info(current)->l1_task_info, \ - sizeof(*L1_SCRATCH_TASK_INFO)); \ - wrusp(_usp); \ -} while(0) -#else -#define start_thread(_regs, _pc, _usp) \ -do { \ - set_fs(USER_DS); \ - (_regs)->pc = (_pc); \ - if (current->mm) \ - (_regs)->p5 = current->mm->start_data; \ - wrusp(_usp); \ -} while (0) -#endif +extern void start_thread(struct pt_regs *regs, unsigned long new_ip, + unsigned long new_sp); /* Forward declaration, a strange C thing */ struct task_struct; diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c index 30d0843..3e1d86e 100644 --- a/arch/blackfin/kernel/process.c +++ b/arch/blackfin/kernel/process.c @@ -160,6 +160,29 @@ pid_t kernel_thread(int (*fn) (void *), void *arg, unsigned long flags) } EXPORT_SYMBOL(kernel_thread); +/* + * Do necessary setup to start up a newly executed thread. + * + * pass the data segment into user programs if it exists, + * it can't hurt anything as far as I can tell + */ +void start_thread(struct pt_regs *regs, unsigned long new_ip, unsigned long new_sp) +{ + set_fs(USER_DS); + regs->pc = new_ip; + if (current->mm) + regs->p5 = current->mm->start_data; +#ifdef CONFIG_SMP + task_thread_info(current)->l1_task_info.stack_start = + (void *)current->mm->context.stack_start; + task_thread_info(current)->l1_task_info.lowest_sp = (void *)new_sp; + memcpy(L1_SCRATCH_TASK_INFO, &task_thread_info(current)->l1_task_info, + sizeof(*L1_SCRATCH_TASK_INFO)); +#endif + wrusp(new_sp); +} +EXPORT_SYMBOL_GPL(start_thread); + void flush_thread(void) { } -- cgit v1.1 From 0f652859571b3f750c01c9d7c27938d3159ca96d Mon Sep 17 00:00:00 2001 From: Mike Frysinger <vapier@gentoo.org> Date: Sat, 13 Jun 2009 11:36:23 -0400 Subject: Blackfin: convert types to asm-generic Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- arch/blackfin/include/asm/posix_types.h | 56 +++++++-------------------------- arch/blackfin/include/asm/types.h | 37 +--------------------- 2 files changed, 12 insertions(+), 81 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/include/asm/posix_types.h b/arch/blackfin/include/asm/posix_types.h index 23aa1f8..80c9d64 100644 --- a/arch/blackfin/include/asm/posix_types.h +++ b/arch/blackfin/include/asm/posix_types.h @@ -1,61 +1,27 @@ #ifndef __ARCH_BFIN_POSIX_TYPES_H #define __ARCH_BFIN_POSIX_TYPES_H -/* - * This file is generally used by user-level software, so you need to - * be a little careful about namespace pollution etc. Also, we cannot - * assume GCC is being used. - */ - -typedef unsigned long __kernel_ino_t; typedef unsigned short __kernel_mode_t; +#define __kernel_mode_t __kernel_mode_t + typedef unsigned short __kernel_nlink_t; -typedef long __kernel_off_t; -typedef int __kernel_pid_t; +#define __kernel_nlink_t __kernel_nlink_t + typedef unsigned int __kernel_ipc_pid_t; -typedef unsigned int __kernel_uid_t; -typedef unsigned int __kernel_gid_t; +#define __kernel_ipc_pid_t __kernel_ipc_pid_t + typedef unsigned long __kernel_size_t; typedef long __kernel_ssize_t; typedef int __kernel_ptrdiff_t; -typedef long __kernel_time_t; -typedef long __kernel_suseconds_t; -typedef long __kernel_clock_t; -typedef int __kernel_timer_t; -typedef int __kernel_clockid_t; -typedef int __kernel_daddr_t; -typedef char *__kernel_caddr_t; -typedef unsigned short __kernel_uid16_t; -typedef unsigned short __kernel_gid16_t; -typedef unsigned int __kernel_uid32_t; -typedef unsigned int __kernel_gid32_t; +#define __kernel_size_t __kernel_size_t typedef unsigned short __kernel_old_uid_t; typedef unsigned short __kernel_old_gid_t; -typedef unsigned short __kernel_old_dev_t; - -#ifdef __GNUC__ -typedef long long __kernel_loff_t; -#endif +#define __kernel_old_uid_t __kernel_old_uid_t -typedef struct { - int val[2]; -} __kernel_fsid_t; - -#if defined(__KERNEL__) - -#undef __FD_SET -#define __FD_SET(d, set) ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d)) - -#undef __FD_CLR -#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d)) - -#undef __FD_ISSET -#define __FD_ISSET(d, set) ((set)->fds_bits[__FDELT(d)] & __FDMASK(d)) - -#undef __FD_ZERO -#define __FD_ZERO(fdsetp) (memset (fdsetp, 0, sizeof(*(fd_set *)fdsetp))) +typedef unsigned short __kernel_old_dev_t; +#define __kernel_old_dev_t __kernel_old_dev_t -#endif /* defined(__KERNEL__) */ +#include <asm-generic/posix_types.h> #endif diff --git a/arch/blackfin/include/asm/types.h b/arch/blackfin/include/asm/types.h index 8441cbc..b9e79bc 100644 --- a/arch/blackfin/include/asm/types.h +++ b/arch/blackfin/include/asm/types.h @@ -1,36 +1 @@ -#ifndef _BFIN_TYPES_H -#define _BFIN_TYPES_H - -/* - * This file is never included by application software unless - * explicitly requested (e.g., via linux/types.h) in which case the - * application is Linux specific so (user-) name space pollution is - * not a major issue. However, for interoperability, libraries still - * need to be careful to avoid a name clashes. - */ -#include <asm-generic/int-ll64.h> - -#ifndef __ASSEMBLY__ - -typedef unsigned short umode_t; - -#endif /* __ASSEMBLY__ */ -/* - * These aren't exported outside the kernel to avoid name space clashes - */ -#ifdef __KERNEL__ - -#define BITS_PER_LONG 32 - -#ifndef __ASSEMBLY__ - -/* Dma addresses are 32-bits wide. */ - -typedef u32 dma_addr_t; -typedef u64 dma64_addr_t; - -#endif /* __ASSEMBLY__ */ - -#endif /* __KERNEL__ */ - -#endif /* _BFIN_TYPES_H */ +#include <asm-generic/types.h> -- cgit v1.1 From eec511d75edd5139ea6de537f6908085b171e7a0 Mon Sep 17 00:00:00 2001 From: Mike Frysinger <vapier@gentoo.org> Date: Sat, 13 Jun 2009 11:39:55 -0400 Subject: Blackfin: convert page/tlb to asm-generic Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- arch/blackfin/include/asm/io.h | 1 - arch/blackfin/include/asm/page.h | 85 +----------------------------------- arch/blackfin/include/asm/tlbflush.h | 57 +----------------------- arch/blackfin/include/asm/ucontext.h | 18 +------- 4 files changed, 4 insertions(+), 157 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/include/asm/io.h b/arch/blackfin/include/asm/io.h index 3022b5c..37053ec 100644 --- a/arch/blackfin/include/asm/io.h +++ b/arch/blackfin/include/asm/io.h @@ -222,7 +222,6 @@ extern void blkfin_inv_cache_all(void); #define ioport_unmap(addr) /* Pages to physical address... */ -#define page_to_phys(page) ((page - mem_map) << PAGE_SHIFT) #define page_to_bus(page) ((page - mem_map) << PAGE_SHIFT) #define phys_to_virt(vaddr) ((void *) (vaddr)) diff --git a/arch/blackfin/include/asm/page.h b/arch/blackfin/include/asm/page.h index 3ea2016..29dcf75 100644 --- a/arch/blackfin/include/asm/page.h +++ b/arch/blackfin/include/asm/page.h @@ -1,88 +1,7 @@ #ifndef _BLACKFIN_PAGE_H #define _BLACKFIN_PAGE_H -/* PAGE_SHIFT determines the page size */ +#include <asm-generic/page.h> +#define MAP_NR(addr) (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT) -#define PAGE_SHIFT 12 -#ifdef __ASSEMBLY__ -#define PAGE_SIZE (1 << PAGE_SHIFT) -#else -#define PAGE_SIZE (1UL << PAGE_SHIFT) #endif -#define PAGE_MASK (~(PAGE_SIZE-1)) - -#include <asm/setup.h> - -#ifndef __ASSEMBLY__ - -#define get_user_page(vaddr) __get_free_page(GFP_KERNEL) -#define free_user_page(page, addr) free_page(addr) - -#define clear_page(page) memset((page), 0, PAGE_SIZE) -#define copy_page(to,from) memcpy((to), (from), PAGE_SIZE) - -#define clear_user_page(page, vaddr,pg) clear_page(page) -#define copy_user_page(to, from, vaddr,pg) copy_page(to, from) - -/* - * These are used to make use of C type-checking.. - */ -typedef struct { - unsigned long pte; -} pte_t; -typedef struct { - unsigned long pmd[16]; -} pmd_t; -typedef struct { - unsigned long pgd; -} pgd_t; -typedef struct { - unsigned long pgprot; -} pgprot_t; -typedef struct page *pgtable_t; - -#define pte_val(x) ((x).pte) -#define pmd_val(x) ((&x)->pmd[0]) -#define pgd_val(x) ((x).pgd) -#define pgprot_val(x) ((x).pgprot) - -#define __pte(x) ((pte_t) { (x) } ) -#define __pmd(x) ((pmd_t) { (x) } ) -#define __pgd(x) ((pgd_t) { (x) } ) -#define __pgprot(x) ((pgprot_t) { (x) } ) - -extern unsigned long memory_start; -extern unsigned long memory_end; - -#endif /* !__ASSEMBLY__ */ - -#include <asm/page_offset.h> -#include <asm/io.h> - -#define PAGE_OFFSET (PAGE_OFFSET_RAW) - -#ifndef __ASSEMBLY__ - -#define __pa(vaddr) virt_to_phys((void *)(vaddr)) -#define __va(paddr) phys_to_virt((unsigned long)(paddr)) - -#define MAP_NR(addr) (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT) - -#define virt_to_pfn(kaddr) (__pa(kaddr) >> PAGE_SHIFT) -#define pfn_to_virt(pfn) __va((pfn) << PAGE_SHIFT) -#define virt_to_page(addr) (mem_map + (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT)) -#define page_to_virt(page) ((((page) - mem_map) << PAGE_SHIFT) + PAGE_OFFSET) -#define VALID_PAGE(page) ((page - mem_map) < max_mapnr) - -#define pfn_to_page(pfn) virt_to_page(pfn_to_virt(pfn)) -#define page_to_pfn(page) virt_to_pfn(page_to_virt(page)) -#define pfn_valid(pfn) ((pfn) < max_mapnr) - -#define virt_addr_valid(kaddr) (((void *)(kaddr) >= (void *)PAGE_OFFSET) && \ - ((void *)(kaddr) < (void *)memory_end)) - -#include <asm-generic/getorder.h> - -#endif /* __ASSEMBLY__ */ - -#endif /* _BLACKFIN_PAGE_H */ diff --git a/arch/blackfin/include/asm/tlbflush.h b/arch/blackfin/include/asm/tlbflush.h index 277b400..f1a06c0 100644 --- a/arch/blackfin/include/asm/tlbflush.h +++ b/arch/blackfin/include/asm/tlbflush.h @@ -1,56 +1 @@ -#ifndef _BLACKFIN_TLBFLUSH_H -#define _BLACKFIN_TLBFLUSH_H - -/* - * Copyright (C) 2000 Lineo, David McCullough <davidm@uclinux.org> - * Copyright (C) 2000-2002, Greg Ungerer <gerg@snapgear.com> - */ - -#include <asm/setup.h> - -/* - * flush all user-space atc entries. - */ -static inline void __flush_tlb(void) -{ - BUG(); -} - -static inline void __flush_tlb_one(unsigned long addr) -{ - BUG(); -} - -#define flush_tlb() __flush_tlb() - -/* - * flush all atc entries (both kernel and user-space entries). - */ -static inline void flush_tlb_all(void) -{ - BUG(); -} - -static inline void flush_tlb_mm(struct mm_struct *mm) -{ - BUG(); -} - -static inline void flush_tlb_page(struct vm_area_struct *vma, - unsigned long addr) -{ - BUG(); -} - -static inline void flush_tlb_range(struct mm_struct *mm, - unsigned long start, unsigned long end) -{ - BUG(); -} - -static inline void flush_tlb_kernel_page(unsigned long addr) -{ - BUG(); -} - -#endif +#include <asm-generic/tlbflush.h> diff --git a/arch/blackfin/include/asm/ucontext.h b/arch/blackfin/include/asm/ucontext.h index 4a4e385..9bc07b9 100644 --- a/arch/blackfin/include/asm/ucontext.h +++ b/arch/blackfin/include/asm/ucontext.h @@ -1,17 +1 @@ -/** Changes made by Tony Kou Lineo Inc. May 2001 - * - * Based on: include/m68knommu/ucontext.h - */ - -#ifndef _BLACKFIN_UCONTEXT_H -#define _BLACKFIN_UCONTEXT_H - -struct ucontext { - unsigned long uc_flags; /* the others are necessary */ - struct ucontext *uc_link; - stack_t uc_stack; - struct sigcontext uc_mcontext; - sigset_t uc_sigmask; /* mask last for extensibility */ -}; - -#endif /* _BLACKFIN_UCONTEXT_H */ +#include <asm-generic/ucontext.h> -- cgit v1.1 From b99c6ebe8f53dce1f56f0d483f6a7c23edb19d4c Mon Sep 17 00:00:00 2001 From: "David S. Miller" <davem@davemloft.net> Date: Thu, 18 Jun 2009 01:44:19 -0700 Subject: sparc64: Fix UP bootup regression. Commit b696fdc259f0d94348a9327bed352fac44d4883d ("sparc64: Defer cpu_data() setup until end of per-cpu data initialization.") broke bootup for UP builds because the cpu_data() initialization only occurs in setup_per_cpu_areas() which is never compiled in nor called in UP builds. Fix this up by calling the setups directly from init_64.c when non-SMP. Reported-by: Alexander Beregalov <a.beregalov@gmail.com> Tested-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> --- arch/sparc/mm/init_64.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c index ca92e2f..ed6be6b 100644 --- a/arch/sparc/mm/init_64.c +++ b/arch/sparc/mm/init_64.c @@ -1796,10 +1796,16 @@ void __init paging_init(void) prom_build_devicetree(); of_populate_present_mask(); +#ifndef CONFIG_SMP + of_fill_in_cpu_data(); +#endif if (tlb_type == hypervisor) { sun4v_mdesc_init(); mdesc_populate_present_mask(cpu_all_mask); +#ifndef CONFIG_SMP + mdesc_fill_in_cpu_data(cpu_all_mask); +#endif } /* Once the OF device tree and MDESC have been setup, we know -- cgit v1.1 From f9188e023c248d73f5b4a589b480e065c1864068 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra <a.p.zijlstra@chello.nl> Date: Thu, 18 Jun 2009 22:20:52 +0200 Subject: perf_counter: Make callchain samples extensible Before exposing upstream tools to a callchain-samples ABI, tidy it up to make it more extensible in the future: Use markers in the IP chain to denote context, use (u64)-1..-4095 range for these context markers because we use them for ERR_PTR(), so these addresses are unlikely to be mapped. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/kernel/cpu/perf_counter.c | 29 ++++++----------------------- 1 file changed, 6 insertions(+), 23 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c index ce1ae3f..76dfef2 100644 --- a/arch/x86/kernel/cpu/perf_counter.c +++ b/arch/x86/kernel/cpu/perf_counter.c @@ -1555,9 +1555,9 @@ const struct pmu *hw_perf_counter_init(struct perf_counter *counter) */ static inline -void callchain_store(struct perf_callchain_entry *entry, unsigned long ip) +void callchain_store(struct perf_callchain_entry *entry, u64 ip) { - if (entry->nr < MAX_STACK_DEPTH) + if (entry->nr < PERF_MAX_STACK_DEPTH) entry->ip[entry->nr++] = ip; } @@ -1602,22 +1602,10 @@ static const struct stacktrace_ops backtrace_ops = { static void perf_callchain_kernel(struct pt_regs *regs, struct perf_callchain_entry *entry) { - unsigned long bp; - char *stack; - int nr = entry->nr; - + callchain_store(entry, PERF_CONTEXT_KERNEL); callchain_store(entry, regs->ip); - stack = ((char *)regs + sizeof(struct pt_regs)); -#ifdef CONFIG_FRAME_POINTER - get_bp(bp); -#else - bp = 0; -#endif - - dump_trace(NULL, regs, (void *)&stack, bp, &backtrace_ops, entry); - - entry->kernel = entry->nr - nr; + dump_trace(NULL, regs, NULL, 0, &backtrace_ops, entry); } /* @@ -1669,16 +1657,16 @@ perf_callchain_user(struct pt_regs *regs, struct perf_callchain_entry *entry) { struct stack_frame frame; const void __user *fp; - int nr = entry->nr; if (!user_mode(regs)) regs = task_pt_regs(current); fp = (void __user *)regs->bp; + callchain_store(entry, PERF_CONTEXT_USER); callchain_store(entry, regs->ip); - while (entry->nr < MAX_STACK_DEPTH) { + while (entry->nr < PERF_MAX_STACK_DEPTH) { frame.next_frame = NULL; frame.return_address = 0; @@ -1691,8 +1679,6 @@ perf_callchain_user(struct pt_regs *regs, struct perf_callchain_entry *entry) callchain_store(entry, frame.return_address); fp = frame.next_frame; } - - entry->user = entry->nr - nr; } static void @@ -1728,9 +1714,6 @@ struct perf_callchain_entry *perf_callchain(struct pt_regs *regs) entry = &__get_cpu_var(irq_entry); entry->nr = 0; - entry->hv = 0; - entry->kernel = 0; - entry->user = 0; perf_do_callchain(regs, entry); -- cgit v1.1 From c3c2174031def62eeb8433dee8ef7e8d9493b1cf Mon Sep 17 00:00:00 2001 From: Catalin Marinas <catalin.marinas@arm.com> Date: Fri, 19 Jun 2009 11:28:48 +0100 Subject: [ARM] 5555/1: RealView: Include asm/smp_twd.h in realview-pbx.c This header file is needed for twd_base. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> --- arch/arm/mach-realview/realview_pbx.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c index 1fe294d..ede2a57 100644 --- a/arch/arm/mach-realview/realview_pbx.c +++ b/arch/arm/mach-realview/realview_pbx.c @@ -27,6 +27,7 @@ #include <asm/irq.h> #include <asm/leds.h> #include <asm/mach-types.h> +#include <asm/smp_twd.h> #include <asm/hardware/gic.h> #include <asm/hardware/cache-l2x0.h> -- cgit v1.1 From 41184f6a5ef0d88529904d54f06f88b67fb76f4a Mon Sep 17 00:00:00 2001 From: Catalin Marinas <catalin.marinas@arm.com> Date: Fri, 19 Jun 2009 11:30:12 +0100 Subject: [ARM] 5556/1: Fix the irq_desc.cpu references The cpu member of struct irq_desc was recently renamed to node. The patch renames the ARM references to the old member. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> --- arch/arm/common/gic.c | 2 +- arch/arm/kernel/irq.c | 6 +++--- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index 664c7b8..337741f 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -117,7 +117,7 @@ static int gic_set_cpu(unsigned int irq, const struct cpumask *mask_val) u32 val; spin_lock(&irq_controller_lock); - irq_desc[irq].cpu = cpu; + irq_desc[irq].node = cpu; val = readl(reg) & ~(0xff << shift); val |= 1 << (cpu + shift); writel(val, reg); diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 6874c7d..096f600 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -167,7 +167,7 @@ void __init init_IRQ(void) #ifdef CONFIG_SMP cpumask_setall(bad_irq_desc.affinity); - bad_irq_desc.cpu = smp_processor_id(); + bad_irq_desc.node = smp_processor_id(); #endif init_arch_irq(); } @@ -176,7 +176,7 @@ void __init init_IRQ(void) static void route_irq(struct irq_desc *desc, unsigned int irq, unsigned int cpu) { - pr_debug("IRQ%u: moving from cpu%u to cpu%u\n", irq, desc->cpu, cpu); + pr_debug("IRQ%u: moving from cpu%u to cpu%u\n", irq, desc->node, cpu); spin_lock_irq(&desc->lock); desc->chip->set_affinity(irq, cpumask_of(cpu)); @@ -195,7 +195,7 @@ void migrate_irqs(void) for (i = 0; i < NR_IRQS; i++) { struct irq_desc *desc = irq_desc + i; - if (desc->cpu == cpu) { + if (desc->node == cpu) { unsigned int newcpu = cpumask_any_and(desc->affinity, cpu_online_mask); if (newcpu >= nr_cpu_ids) { -- cgit v1.1 From 0c87197142427063e096f11603543ca874045952 Mon Sep 17 00:00:00 2001 From: Ingo Molnar <mingo@elte.hu> Date: Mon, 15 Jun 2009 11:35:01 +0200 Subject: perf_counter, x86: Improve interactions with fast-gup Improve a few details in perfcounter call-chain recording that makes use of fast-GUP: - Use ACCESS_ONCE() to observe the pte value. ptes are fundamentally racy and can be changed on another CPU, so we have to be careful about how we access them. The PAE branch is already careful with read-barriers - but the non-PAE and 64-bit side needs an ACCESS_ONCE() to make sure the pte value is observed only once. - make the checks a bit stricter so that we can feed it any kind of cra^H^H^H user-space input ;-) Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/include/asm/uaccess.h | 7 ++++++- arch/x86/mm/gup.c | 2 +- 2 files changed, 7 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/uaccess.h b/arch/x86/include/asm/uaccess.h index b685ece..512ee87 100644 --- a/arch/x86/include/asm/uaccess.h +++ b/arch/x86/include/asm/uaccess.h @@ -25,7 +25,12 @@ #define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) #define KERNEL_DS MAKE_MM_SEG(-1UL) -#define USER_DS MAKE_MM_SEG(PAGE_OFFSET) + +#ifdef CONFIG_X86_32 +# define USER_DS MAKE_MM_SEG(PAGE_OFFSET) +#else +# define USER_DS MAKE_MM_SEG(__VIRTUAL_MASK) +#endif #define get_ds() (KERNEL_DS) #define get_fs() (current_thread_info()->addr_limit) diff --git a/arch/x86/mm/gup.c b/arch/x86/mm/gup.c index 697d572..2d1d784 100644 --- a/arch/x86/mm/gup.c +++ b/arch/x86/mm/gup.c @@ -14,7 +14,7 @@ static inline pte_t gup_get_pte(pte_t *ptep) { #ifndef CONFIG_X86_PAE - return *ptep; + return ACCESS_ONCE(*ptep); #else /* * With get_user_pages_fast, we walk down the pagetables without taking -- cgit v1.1 From c2860d43f5dfab599fc1308ab61b1d3e30801ceb Mon Sep 17 00:00:00 2001 From: "George G. Davis" <gdavis@mvista.com> Date: Thu, 4 Jun 2009 17:16:04 +0100 Subject: [ARM] 5540/1: 32-bit Thumb-2 {ld,st}{m,rd} alignment fault fixup support From: Min Zhang <mzhang@mvista.com> Add alignment fault fixup support for 32-bit Thumb-2 LDM, LDRD, POP, PUSH, STM and STRD instructions. Alignment fault fixup support for the remaining 32-bit Thumb-2 load/store instruction cases is not included since ARMv6 and later processors include hardware support for loads and stores of unaligned words and halfwords. Signed-off-by: Min Zhang <mzhang@mvista.com> Signed-off-by: George G. Davis <gdavis@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> --- arch/arm/mm/alignment.c | 139 +++++++++++++++++++++++++++++++++++++++++------- 1 file changed, 119 insertions(+), 20 deletions(-) (limited to 'arch') diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index 3a398be..03cd27d 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -62,6 +62,12 @@ #define SHIFT_ASR 0x40 #define SHIFT_RORRRX 0x60 +#define BAD_INSTR 0xdeadc0de + +/* Thumb-2 32 bit format per ARMv7 DDI0406A A6.3, either f800h,e800h,f800h */ +#define IS_T32(hi16) \ + (((hi16) & 0xe000) == 0xe000 && ((hi16) & 0x1800)) + static unsigned long ai_user; static unsigned long ai_sys; static unsigned long ai_skipped; @@ -332,38 +338,48 @@ do_alignment_ldrdstrd(unsigned long addr, unsigned long instr, struct pt_regs *regs) { unsigned int rd = RD_BITS(instr); - - if (((rd & 1) == 1) || (rd == 14)) + unsigned int rd2; + int load; + + if ((instr & 0xfe000000) == 0xe8000000) { + /* ARMv7 Thumb-2 32-bit LDRD/STRD */ + rd2 = (instr >> 8) & 0xf; + load = !!(LDST_L_BIT(instr)); + } else if (((rd & 1) == 1) || (rd == 14)) goto bad; + else { + load = ((instr & 0xf0) == 0xd0); + rd2 = rd + 1; + } ai_dword += 1; if (user_mode(regs)) goto user; - if ((instr & 0xf0) == 0xd0) { + if (load) { unsigned long val; get32_unaligned_check(val, addr); regs->uregs[rd] = val; get32_unaligned_check(val, addr + 4); - regs->uregs[rd + 1] = val; + regs->uregs[rd2] = val; } else { put32_unaligned_check(regs->uregs[rd], addr); - put32_unaligned_check(regs->uregs[rd + 1], addr + 4); + put32_unaligned_check(regs->uregs[rd2], addr + 4); } return TYPE_LDST; user: - if ((instr & 0xf0) == 0xd0) { + if (load) { unsigned long val; get32t_unaligned_check(val, addr); regs->uregs[rd] = val; get32t_unaligned_check(val, addr + 4); - regs->uregs[rd + 1] = val; + regs->uregs[rd2] = val; } else { put32t_unaligned_check(regs->uregs[rd], addr); - put32t_unaligned_check(regs->uregs[rd + 1], addr + 4); + put32t_unaligned_check(regs->uregs[rd2], addr + 4); } return TYPE_LDST; @@ -616,8 +632,72 @@ thumb2arm(u16 tinstr) /* Else fall through for illegal instruction case */ default: - return 0xdeadc0de; + return BAD_INSTR; + } +} + +/* + * Convert Thumb-2 32 bit LDM, STM, LDRD, STRD to equivalent instruction + * handlable by ARM alignment handler, also find the corresponding handler, + * so that we can reuse ARM userland alignment fault fixups for Thumb. + * + * @pinstr: original Thumb-2 instruction; returns new handlable instruction + * @regs: register context. + * @poffset: return offset from faulted addr for later writeback + * + * NOTES: + * 1. Comments below refer to ARMv7 DDI0406A Thumb Instruction sections. + * 2. Register name Rt from ARMv7 is same as Rd from ARMv6 (Rd is Rt) + */ +static void * +do_alignment_t32_to_handler(unsigned long *pinstr, struct pt_regs *regs, + union offset_union *poffset) +{ + unsigned long instr = *pinstr; + u16 tinst1 = (instr >> 16) & 0xffff; + u16 tinst2 = instr & 0xffff; + poffset->un = 0; + + switch (tinst1 & 0xffe0) { + /* A6.3.5 Load/Store multiple */ + case 0xe880: /* STM/STMIA/STMEA,LDM/LDMIA, PUSH/POP T2 */ + case 0xe8a0: /* ...above writeback version */ + case 0xe900: /* STMDB/STMFD, LDMDB/LDMEA */ + case 0xe920: /* ...above writeback version */ + /* no need offset decision since handler calculates it */ + return do_alignment_ldmstm; + + case 0xf840: /* POP/PUSH T3 (single register) */ + if (RN_BITS(instr) == 13 && (tinst2 & 0x09ff) == 0x0904) { + u32 L = !!(LDST_L_BIT(instr)); + const u32 subset[2] = { + 0xe92d0000, /* STMDB sp!,{registers} */ + 0xe8bd0000, /* LDMIA sp!,{registers} */ + }; + *pinstr = subset[L] | (1<<RD_BITS(instr)); + return do_alignment_ldmstm; + } + /* Else fall through for illegal instruction case */ + break; + + /* A6.3.6 Load/store double, STRD/LDRD(immed, lit, reg) */ + case 0xe860: + case 0xe960: + case 0xe8e0: + case 0xe9e0: + poffset->un = (tinst2 & 0xff) << 2; + case 0xe940: + case 0xe9c0: + return do_alignment_ldrdstrd; + + /* + * No need to handle load/store instructions up to word size + * since ARMv6 and later CPUs can perform unaligned accesses. + */ + default: + break; } + return NULL; } static int @@ -630,6 +710,8 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs) mm_segment_t fs; unsigned int fault; u16 tinstr = 0; + int isize = 4; + int thumb2_32b = 0; instrptr = instruction_pointer(regs); @@ -637,8 +719,19 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs) set_fs(KERNEL_DS); if (thumb_mode(regs)) { fault = __get_user(tinstr, (u16 *)(instrptr & ~1)); - if (!(fault)) - instr = thumb2arm(tinstr); + if (!fault) { + if (cpu_architecture() >= CPU_ARCH_ARMv7 && + IS_T32(tinstr)) { + /* Thumb-2 32-bit */ + u16 tinst2 = 0; + fault = __get_user(tinst2, (u16 *)(instrptr+2)); + instr = (tinstr << 16) | tinst2; + thumb2_32b = 1; + } else { + isize = 2; + instr = thumb2arm(tinstr); + } + } } else fault = __get_user(instr, (u32 *)instrptr); set_fs(fs); @@ -655,7 +748,7 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs) fixup: - regs->ARM_pc += thumb_mode(regs) ? 2 : 4; + regs->ARM_pc += isize; switch (CODING_BITS(instr)) { case 0x00000000: /* 3.13.4 load/store instruction extensions */ @@ -714,18 +807,25 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs) handler = do_alignment_ldrstr; break; - case 0x08000000: /* ldm or stm */ - handler = do_alignment_ldmstm; + case 0x08000000: /* ldm or stm, or thumb-2 32bit instruction */ + if (thumb2_32b) + handler = do_alignment_t32_to_handler(&instr, regs, &offset); + else + handler = do_alignment_ldmstm; break; default: goto bad; } + if (!handler) + goto bad; type = handler(addr, instr, regs); - if (type == TYPE_ERROR || type == TYPE_FAULT) + if (type == TYPE_ERROR || type == TYPE_FAULT) { + regs->ARM_pc -= isize; goto bad_or_fault; + } if (type == TYPE_LDST) do_alignment_finish_ldst(addr, instr, regs, offset); @@ -735,7 +835,6 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs) bad_or_fault: if (type == TYPE_ERROR) goto bad; - regs->ARM_pc -= thumb_mode(regs) ? 2 : 4; /* * We got a fault - fix it up, or die. */ @@ -751,8 +850,8 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs) */ printk(KERN_ERR "Alignment trap: not handling instruction " "%0*lx at [<%08lx>]\n", - thumb_mode(regs) ? 4 : 8, - thumb_mode(regs) ? tinstr : instr, instrptr); + isize << 1, + isize == 2 ? tinstr : instr, instrptr); ai_skipped += 1; return 1; @@ -763,8 +862,8 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs) printk("Alignment trap: %s (%d) PC=0x%08lx Instr=0x%0*lx " "Address=0x%08lx FSR 0x%03x\n", current->comm, task_pid_nr(current), instrptr, - thumb_mode(regs) ? 4 : 8, - thumb_mode(regs) ? tinstr : instr, + isize << 1, + isize == 2 ? tinstr : instr, addr, fsr); if (ai_usermode & UM_FIXUP) -- cgit v1.1 From 7436127ce9042f95a10bb5423f726fd63a61934d Mon Sep 17 00:00:00 2001 From: Catalin Marinas <catalin.marinas@arm.com> Date: Fri, 19 Jun 2009 16:39:29 +0100 Subject: [ARM] 5557/1: Discard some ARM.ex*.*exit.text sections when !HOTPLUG or !HOTPLUG_CPU Not discarding these sections when hotplug isn't available prevents the kernel from building. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> --- arch/arm/kernel/vmlinux.lds.S | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index 6c07797..4340bf3 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -84,6 +84,14 @@ SECTIONS *(.exitcall.exit) *(.ARM.exidx.exit.text) *(.ARM.extab.exit.text) +#ifndef CONFIG_HOTPLUG_CPU + *(.ARM.exidx.cpuexit.text) + *(.ARM.extab.cpuexit.text) +#endif +#ifndef CONFIG_HOTPLUG + *(.ARM.exidx.devexit.text) + *(.ARM.extab.devexit.text) +#endif #ifndef CONFIG_MMU *(.fixup) *(__ex_table) -- cgit v1.1 From c894ed6956f126d60d888e8efc5fb3a595ba89ae Mon Sep 17 00:00:00 2001 From: Catalin Marinas <catalin.marinas@arm.com> Date: Fri, 19 Jun 2009 16:42:11 +0100 Subject: [ARM] 5558/1: Add extra checks to ARM unwinder to avoid tracing corrupt stacks There are situations where the unwinder goes beyond stack boundaries and unwinds random data. This patch moves the stack boundaries check after the unwind_exec_insn() call and adds an extra check for possible infinite loops (like "mov pc, lr" with pc == lr). The patch also fixes a bug in the unwind instructions interpreter. The 0xb0 instruction can only set PC to LR if this wasn't already set by a previous instruction (this is used on exceptions taken while in kernel mode where svc_entry is annotated with ".save {r0 - pc}"). Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> --- arch/arm/kernel/unwind.c | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c index 1dedc2c..dd56e11 100644 --- a/arch/arm/kernel/unwind.c +++ b/arch/arm/kernel/unwind.c @@ -212,7 +212,8 @@ static int unwind_exec_insn(struct unwind_ctrl_block *ctrl) ctrl->vrs[14] = *vsp++; ctrl->vrs[SP] = (unsigned long)vsp; } else if (insn == 0xb0) { - ctrl->vrs[PC] = ctrl->vrs[LR]; + if (ctrl->vrs[PC] == 0) + ctrl->vrs[PC] = ctrl->vrs[LR]; /* no further processing */ ctrl->entries = 0; } else if (insn == 0xb1) { @@ -309,18 +310,20 @@ int unwind_frame(struct stackframe *frame) } while (ctrl.entries > 0) { - int urc; - - if (ctrl.vrs[SP] < low || ctrl.vrs[SP] >= high) - return -URC_FAILURE; - urc = unwind_exec_insn(&ctrl); + int urc = unwind_exec_insn(&ctrl); if (urc < 0) return urc; + if (ctrl.vrs[SP] < low || ctrl.vrs[SP] >= high) + return -URC_FAILURE; } if (ctrl.vrs[PC] == 0) ctrl.vrs[PC] = ctrl.vrs[LR]; + /* check for infinite loop */ + if (frame->pc == ctrl.vrs[PC]) + return -URC_FAILURE; + frame->fp = ctrl.vrs[FP]; frame->sp = ctrl.vrs[SP]; frame->lr = ctrl.vrs[LR]; @@ -332,7 +335,6 @@ int unwind_frame(struct stackframe *frame) void unwind_backtrace(struct pt_regs *regs, struct task_struct *tsk) { struct stackframe frame; - unsigned long high, low; register unsigned long current_sp asm ("sp"); pr_debug("%s(regs = %p tsk = %p)\n", __func__, regs, tsk); @@ -362,9 +364,6 @@ void unwind_backtrace(struct pt_regs *regs, struct task_struct *tsk) frame.pc = thread_saved_pc(tsk); } - low = frame.sp & ~(THREAD_SIZE - 1); - high = low + THREAD_SIZE; - while (1) { int urc; unsigned long where = frame.pc; -- cgit v1.1 From feb97c3644a560ffdf9a17c65b1df807b5b4432f Mon Sep 17 00:00:00 2001 From: Catalin Marinas <catalin.marinas@arm.com> Date: Fri, 19 Jun 2009 16:43:08 +0100 Subject: [ARM] 5559/1: Limit the stack unwinding caused by a kthread exit When a kthread function returns, it branches to do_exit(). However, the unwinding information isn't valid anymore and any stack trace caused by do_exit() may be incorrect. This patch adds a kernel_thread_exit() function and annotated with '.cantunwind' so that the unwinder stops when reaching it. Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> --- arch/arm/kernel/process.c | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 1585423..56820cc 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -352,6 +352,23 @@ asm( ".section .text\n" " .size kernel_thread_helper, . - kernel_thread_helper\n" " .previous"); +#ifdef CONFIG_ARM_UNWIND +extern void kernel_thread_exit(long code); +asm( ".section .text\n" +" .align\n" +" .type kernel_thread_exit, #function\n" +"kernel_thread_exit:\n" +" .fnstart\n" +" .cantunwind\n" +" bl do_exit\n" +" nop\n" +" .fnend\n" +" .size kernel_thread_exit, . - kernel_thread_exit\n" +" .previous"); +#else +#define kernel_thread_exit do_exit +#endif + /* * Create a kernel thread. */ @@ -363,7 +380,7 @@ pid_t kernel_thread(int (*fn)(void *), void *arg, unsigned long flags) regs.ARM_r1 = (unsigned long)arg; regs.ARM_r2 = (unsigned long)fn; - regs.ARM_r3 = (unsigned long)do_exit; + regs.ARM_r3 = (unsigned long)kernel_thread_exit; regs.ARM_pc = (unsigned long)kernel_thread_helper; regs.ARM_cpsr = SVC_MODE | PSR_ENDSTATE; -- cgit v1.1 From 5587931c30dcf778cf7071d1cbac8ea584706dd8 Mon Sep 17 00:00:00 2001 From: Joonyoung Shim <jy0922.shim@samsung.com> Date: Tue, 16 Jun 2009 20:05:57 +0900 Subject: [ARM] Add old Feroceon support to compressed/head.S This patch supports the cache handling for some old Feroceon cores for which the CPU ID is like 0x41159260. This is a complement to commit ab6d15d50637fc25ee941710b23fed09ceb28db3. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Nicolas Pitre <nico@marvell.com> --- arch/arm/boot/compressed/head.S | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 01d49be..4515728 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -674,6 +674,15 @@ proc_types: b __armv4_mmu_cache_off b __armv5tej_mmu_cache_flush +#ifdef CONFIG_CPU_FEROCEON_OLD_ID + /* this conflicts with the standard ARMv5TE entry */ + .long 0x41009260 @ Old Feroceon + .long 0xff00fff0 + b __armv4_mmu_cache_on + b __armv4_mmu_cache_off + b __armv5tej_mmu_cache_flush +#endif + .word 0x66015261 @ FA526 .word 0xff01fff1 b __fa526_cache_on -- cgit v1.1 From d2998c2c3608e6c674f9079b661583927fbe61b0 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov <avorontsov@ru.mvista.com> Date: Thu, 18 Jun 2009 16:49:02 -0700 Subject: powerpc/86xx: add MMC SPI support for MPC8610HPCD boards This patch adds spi and mmc-spi-slot nodes, plus a gpio-controller for PIXIS' sdcsr bank that is used for managing SPI chip-select and for reading card's states. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Kumar Gala <galak@gate.crashing.org> Cc: David Brownell <david-b@pacbell.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> --- arch/powerpc/boot/dts/mpc8610_hpcd.dts | 32 ++++++++++++++++++++++++++++++ arch/powerpc/platforms/86xx/mpc8610_hpcd.c | 4 ++++ 2 files changed, 36 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts index cfc2c60..f468d21 100644 --- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts +++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts @@ -100,8 +100,18 @@ }; board-control@3,0 { + #address-cells = <1>; + #size-cells = <1>; compatible = "fsl,fpga-pixis"; reg = <3 0 0x20>; + ranges = <0 3 0 0x20>; + + sdcsr_pio: gpio-controller@a { + #gpio-cells = <2>; + compatible = "fsl,fpga-pixis-gpio-bank"; + reg = <0xa 1>; + gpio-controller; + }; }; }; @@ -176,6 +186,28 @@ interrupt-parent = <&mpic>; }; + spi@7000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc8610-spi", "fsl,spi"; + reg = <0x7000 0x40>; + cell-index = <0>; + interrupts = <59 2>; + interrupt-parent = <&mpic>; + mode = "cpu"; + gpios = <&sdcsr_pio 7 0>; + + mmc-slot@0 { + compatible = "fsl,mpc8610hpcd-mmc-slot", + "mmc-spi-slot"; + reg = <0>; + gpios = <&sdcsr_pio 0 1 /* nCD */ + &sdcsr_pio 1 0>; /* WP */ + voltage-ranges = <3300 3300>; + spi-max-frequency = <50000000>; + }; + }; + display@2c000 { compatible = "fsl,diu"; reg = <0x2c000 100>; diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c index 51eec0c..627908a 100644 --- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c +++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c @@ -37,6 +37,7 @@ #include <linux/of_platform.h> #include <sysdev/fsl_pci.h> #include <sysdev/fsl_soc.h> +#include <sysdev/simple_gpio.h> #include "mpc86xx.h" @@ -51,6 +52,9 @@ static struct of_device_id __initdata mpc8610_ids[] = { static int __init mpc8610_declare_of_platform_devices(void) { + /* Firstly, register PIXIS GPIOs. */ + simple_gpiochip_init("fsl,fpga-pixis-gpio-bank"); + /* Without this call, the SSI device driver won't get probed. */ of_platform_bus_probe(NULL, mpc8610_ids, NULL); -- cgit v1.1 From 6adb8f388ef2f23d4a81e1e42d15f22d62749a06 Mon Sep 17 00:00:00 2001 From: Paul Walmsley <paul@pwsan.com> Date: Fri, 19 Jun 2009 19:08:24 -0600 Subject: OMAP3 clock: remove wait for DPLL3 M2 clock to stabilize The original CDP kernel that this code comes from waited for 0x800 loops after switching the CORE DPLL M2 divider. This does not appear to be necessary. Signed-off-by: Paul Walmsley <paul@pwsan.com> --- arch/arm/mach-omap2/sram34xx.S | 3 --- 1 file changed, 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S index c080c825..84781a6 100644 --- a/arch/arm/mach-omap2/sram34xx.S +++ b/arch/arm/mach-omap2/sram34xx.S @@ -102,9 +102,6 @@ configure_core_dpll: orr r12, r12, r3, lsl #0x1B @ r3 contains the M2 val str r12, [r11] ldr r12, [r11] @ posted-write barrier for CM - mov r12, #0x800 @ wait for the clock to stabilise - cmp r3, #2 - bne wait_clk_stable bx lr wait_clk_stable: subs r12, r12, #1 -- cgit v1.1 From 2f135eaf182761bb9a5cbd5138a447b0ad2a1fef Mon Sep 17 00:00:00 2001 From: Paul Walmsley <paul@pwsan.com> Date: Fri, 19 Jun 2009 19:08:25 -0600 Subject: OMAP3 clock: initialize SDRC timings at kernel start On the OMAP3, initialize SDRC timings when the kernel boots. This ensures that the kernel is running with known, optimized SDRC timings, rather than whatever was configured by the bootloader. Signed-off-by: Paul Walmsley <paul@pwsan.com> --- arch/arm/mach-omap2/clock34xx.c | 3 --- arch/arm/mach-omap2/io.c | 36 ++++++++++++++++++++++++++++++++++++ 2 files changed, 36 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index 9e43fe5..5458ab3 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -718,9 +718,6 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) if (clk != &dpll3_m2_ck) return -EINVAL; - if (rate == clk->rate) - return 0; - validrate = omap2_clksel_round_rate_div(clk, rate, &new_div); if (validrate != rate) return -EINVAL; diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 32afd94..3a86b0f 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -21,6 +21,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/io.h> +#include <linux/clk.h> #include <asm/tlb.h> @@ -241,6 +242,40 @@ void __init omap2_map_common_io(void) omapfb_reserve_sdram(); } +/* + * omap2_init_reprogram_sdrc - reprogram SDRC timing parameters + * + * Sets the CORE DPLL3 M2 divider to the same value that it's at + * currently. This has the effect of setting the SDRC SDRAM AC timing + * registers to the values currently defined by the kernel. Currently + * only defined for OMAP3; will return 0 if called on OMAP2. Returns + * -EINVAL if the dpll3_m2_ck cannot be found, 0 if called on OMAP2, + * or passes along the return value of clk_set_rate(). + */ +static int __init _omap2_init_reprogram_sdrc(void) +{ + struct clk *dpll3_m2_ck; + int v = -EINVAL; + long rate; + + if (!cpu_is_omap34xx()) + return 0; + + dpll3_m2_ck = clk_get(NULL, "dpll3_m2_ck"); + if (!dpll3_m2_ck) + return -EINVAL; + + rate = clk_get_rate(dpll3_m2_ck); + pr_info("Reprogramming SDRC clock to %ld Hz\n", rate); + v = clk_set_rate(dpll3_m2_ck, rate); + if (v) + pr_err("dpll3_m2_clk rate change failed: %d\n", v); + + clk_put(dpll3_m2_ck); + + return v; +} + void __init omap2_init_common_hw(struct omap_sdrc_params *sp) { omap2_mux_init(); @@ -249,6 +284,7 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sp) clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps); omap2_clk_init(); omap2_sdrc_init(sp); + _omap2_init_reprogram_sdrc(); #endif gpmc_init(); } -- cgit v1.1 From c9812d042a21eb492a36cfabf9f41107f5ecee3d Mon Sep 17 00:00:00 2001 From: Paul Walmsley <paul@pwsan.com> Date: Fri, 19 Jun 2009 19:08:26 -0600 Subject: OMAP3 clock: add a short delay when lowering CORE clk rate When changing the SDRAM clock from 166MHz to 83MHz via the CORE DPLL M2 divider, add a short delay before returning to SDRAM to allow the SDRC time to stabilize. Without this delay, the system is prone to random panics upon re-entering SDRAM. This time delay varies based on MPU frequency. At 500MHz MPU frequency at room temperature, 64 loops seems to work okay; so add another 32 loops for environmental and process variation. Signed-off-by: Paul Walmsley <paul@pwsan.com> --- arch/arm/mach-omap2/clock34xx.c | 30 ++++++++++++++++++++++++++++-- arch/arm/mach-omap2/sram34xx.S | 20 +++++++++----------- arch/arm/plat-omap/include/mach/sram.h | 4 ++-- arch/arm/plat-omap/sram.c | 8 +++++--- 4 files changed, 44 insertions(+), 18 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index 5458ab3..4bfa650 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -286,6 +286,20 @@ static struct omap_clk omap34xx_clks[] = { #define MIN_SDRC_DLL_LOCK_FREQ 83000000 +#define CYCLES_PER_MHZ 1000000 + +/* Scale factor for fixed-point arith in omap3_core_dpll_m2_set_rate() */ +#define SDRC_MPURATE_SCALE 8 + +/* 2^SDRC_MPURATE_BASE_SHIFT: MPU MHz that SDRC_MPURATE_LOOPS is defined for */ +#define SDRC_MPURATE_BASE_SHIFT 9 + +/* + * SDRC_MPURATE_LOOPS: Number of MPU loops to execute at + * 2^MPURATE_BASE_SHIFT MHz for SDRC to stabilize + */ +#define SDRC_MPURATE_LOOPS 96 + /** * omap3_dpll_recalc - recalculate DPLL rate * @clk: DPLL struct clk @@ -709,7 +723,8 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) { u32 new_div = 0; u32 unlock_dll = 0; - unsigned long validrate, sdrcrate; + u32 c; + unsigned long validrate, sdrcrate, mpurate; struct omap_sdrc_params *sp; if (!clk || !rate) @@ -737,6 +752,17 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) unlock_dll = 1; } + /* + * XXX This only needs to be done when the CPU frequency changes + */ + mpurate = arm_fck.rate / CYCLES_PER_MHZ; + c = (mpurate << SDRC_MPURATE_SCALE) >> SDRC_MPURATE_BASE_SHIFT; + c += 1; /* for safety */ + c *= SDRC_MPURATE_LOOPS; + c >>= SDRC_MPURATE_SCALE; + if (c == 0) + c = 1; + pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate, validrate); pr_debug("clock: SDRC timing params used: %08x %08x %08x\n", @@ -747,7 +773,7 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) /* REVISIT: Add SDRC_MR changing to this code also */ omap3_configure_core_dpll(sp->rfr_ctrl, sp->actim_ctrla, - sp->actim_ctrlb, new_div, unlock_dll); + sp->actim_ctrlb, new_div, unlock_dll, c); return 0; } diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S index 84781a6..8d4a88c 100644 --- a/arch/arm/mach-omap2/sram34xx.S +++ b/arch/arm/mach-omap2/sram34xx.S @@ -42,10 +42,14 @@ * r0 = sdrc_rfr_ctrl r1 = sdrc_actim_ctrla r2 = sdrc_actim_ctrlb r3 = M2 * r4 = Unlock SDRC DLL? (1 = yes, 0 = no) -- only unlock DLL for * SDRC rates < 83MHz + * r5 = number of MPU cycles to wait for SDRC to stabilize after + * reprogramming the SDRC when switching to a slower MPU speed + * */ ENTRY(omap3_sram_configure_core_dpll) stmfd sp!, {r1-r12, lr} @ store regs to stack ldr r4, [sp, #52] @ pull extra args off the stack + ldr r5, [sp, #56] @ load extra args from the stack dsb @ flush buffered writes to interconnect cmp r3, #0x2 blne configure_sdrc @@ -59,7 +63,11 @@ ENTRY(omap3_sram_configure_core_dpll) bleq wait_dll_unlock blne wait_dll_lock cmp r3, #0x1 - blne configure_sdrc + beq return_to_sdram + bl configure_sdrc + mov r12, r5 @ if slowing, wait for SDRC to stabilize + bl wait_clk_stable +return_to_sdram: isb @ prevent speculative exec past here mov r0, #0 @ return value ldmfd sp!, {r1-r12, pc} @ restore regs and return @@ -106,16 +114,6 @@ configure_core_dpll: wait_clk_stable: subs r12, r12, #1 bne wait_clk_stable - nop - nop - nop - nop - nop - nop - nop - nop - nop - nop bx lr enable_sdrc: ldr r11, omap3_cm_iclken1_core diff --git a/arch/arm/plat-omap/include/mach/sram.h b/arch/arm/plat-omap/include/mach/sram.h index dca7c16..c32fa0a 100644 --- a/arch/arm/plat-omap/include/mach/sram.h +++ b/arch/arm/plat-omap/include/mach/sram.h @@ -24,7 +24,7 @@ extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass); extern u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl, u32 sdrc_actim_ctrla, u32 sdrc_actim_ctrlb, u32 m2, - u32 unlock_dll); + u32 unlock_dll, u32 f); /* Do not use these */ extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl); @@ -62,7 +62,7 @@ extern unsigned long omap243x_sram_reprogram_sdrc_sz; extern u32 omap3_sram_configure_core_dpll(u32 sdrc_rfr_ctrl, u32 sdrc_actim_ctrla, u32 sdrc_actim_ctrlb, u32 m2, - u32 unlock_dll); + u32 unlock_dll, u32 f); extern unsigned long omap3_sram_configure_core_dpll_sz; #endif diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index a5b9bcd..79c0f02 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -371,15 +371,17 @@ static inline int omap243x_sram_init(void) static u32 (*_omap3_sram_configure_core_dpll)(u32 sdrc_rfr_ctrl, u32 sdrc_actim_ctrla, u32 sdrc_actim_ctrlb, - u32 m2, u32 unlock_dll); + u32 m2, u32 unlock_dll, + u32 f); u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl, u32 sdrc_actim_ctrla, - u32 sdrc_actim_ctrlb, u32 m2, u32 unlock_dll) + u32 sdrc_actim_ctrlb, u32 m2, u32 unlock_dll, + u32 f) { BUG_ON(!_omap3_sram_configure_core_dpll); return _omap3_sram_configure_core_dpll(sdrc_rfr_ctrl, sdrc_actim_ctrla, sdrc_actim_ctrlb, m2, - unlock_dll); + unlock_dll, f); } /* REVISIT: Should this be same as omap34xx_sram_init() after off-idle? */ -- cgit v1.1 From d0ba3922ae241a87d22a1c3ffad72b96fe993c9a Mon Sep 17 00:00:00 2001 From: Paul Walmsley <paul@pwsan.com> Date: Fri, 19 Jun 2009 19:08:27 -0600 Subject: OMAP3 clock/SDRC: program SDRC_MR register during SDRC clock change Program the SDRC_MR_0 register as well during SDRC clock changes. This register allows selection of the memory CAS latency. Some SDRAM chips, such as the Qimonda HYB18M512160AF6, have a lower CAS latency at lower clock rates. Signed-off-by: Paul Walmsley <paul@pwsan.com> --- arch/arm/mach-omap2/clock34xx.c | 4 ++-- arch/arm/mach-omap2/sram34xx.S | 8 +++++++- arch/arm/plat-omap/include/mach/sram.h | 4 ++-- arch/arm/plat-omap/sram.c | 6 +++--- 4 files changed, 14 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index 4bfa650..cf41ab5 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -771,9 +771,9 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) /* REVISIT: SRAM code doesn't support other M2 divisors yet */ WARN_ON(new_div != 1 && new_div != 2); - /* REVISIT: Add SDRC_MR changing to this code also */ omap3_configure_core_dpll(sp->rfr_ctrl, sp->actim_ctrla, - sp->actim_ctrlb, new_div, unlock_dll, c); + sp->actim_ctrlb, new_div, unlock_dll, c, + sp->mr); return 0; } diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S index 8d4a88c..d13f1cc4 100644 --- a/arch/arm/mach-omap2/sram34xx.S +++ b/arch/arm/mach-omap2/sram34xx.S @@ -44,12 +44,14 @@ * SDRC rates < 83MHz * r5 = number of MPU cycles to wait for SDRC to stabilize after * reprogramming the SDRC when switching to a slower MPU speed + * r6 = SDRC_MR_0 register value * */ ENTRY(omap3_sram_configure_core_dpll) stmfd sp!, {r1-r12, lr} @ store regs to stack ldr r4, [sp, #52] @ pull extra args off the stack ldr r5, [sp, #56] @ load extra args from the stack + ldr r6, [sp, #60] @ load extra args from the stack dsb @ flush buffered writes to interconnect cmp r3, #0x2 blne configure_sdrc @@ -151,7 +153,9 @@ configure_sdrc: str r1, [r11] ldr r11, omap3_sdrc_actim_ctrlb str r2, [r11] - ldr r2, [r11] @ posted-write barrier for SDRC + ldr r11, omap3_sdrc_mr_0 + str r6, [r11] + ldr r6, [r11] @ posted-write barrier for SDRC bx lr omap3_sdrc_power: @@ -168,6 +172,8 @@ omap3_sdrc_actim_ctrla: .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_0) omap3_sdrc_actim_ctrlb: .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_0) +omap3_sdrc_mr_0: + .word OMAP34XX_SDRC_REGADDR(SDRC_MR_0) omap3_sdrc_dlla_status: .word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS) omap3_sdrc_dlla_ctrl: diff --git a/arch/arm/plat-omap/include/mach/sram.h b/arch/arm/plat-omap/include/mach/sram.h index c32fa0a..4f87056 100644 --- a/arch/arm/plat-omap/include/mach/sram.h +++ b/arch/arm/plat-omap/include/mach/sram.h @@ -24,7 +24,7 @@ extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass); extern u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl, u32 sdrc_actim_ctrla, u32 sdrc_actim_ctrlb, u32 m2, - u32 unlock_dll, u32 f); + u32 unlock_dll, u32 f, u32 sdrc_mr); /* Do not use these */ extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl); @@ -62,7 +62,7 @@ extern unsigned long omap243x_sram_reprogram_sdrc_sz; extern u32 omap3_sram_configure_core_dpll(u32 sdrc_rfr_ctrl, u32 sdrc_actim_ctrla, u32 sdrc_actim_ctrlb, u32 m2, - u32 unlock_dll, u32 f); + u32 unlock_dll, u32 f, u32 sdrc_mr); extern unsigned long omap3_sram_configure_core_dpll_sz; #endif diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 79c0f02..7dadf1a 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -372,16 +372,16 @@ static u32 (*_omap3_sram_configure_core_dpll)(u32 sdrc_rfr_ctrl, u32 sdrc_actim_ctrla, u32 sdrc_actim_ctrlb, u32 m2, u32 unlock_dll, - u32 f); + u32 f, u32 sdrc_mr); u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl, u32 sdrc_actim_ctrla, u32 sdrc_actim_ctrlb, u32 m2, u32 unlock_dll, - u32 f) + u32 f, u32 sdrc_mr) { BUG_ON(!_omap3_sram_configure_core_dpll); return _omap3_sram_configure_core_dpll(sdrc_rfr_ctrl, sdrc_actim_ctrla, sdrc_actim_ctrlb, m2, - unlock_dll, f); + unlock_dll, f, sdrc_mr); } /* REVISIT: Should this be same as omap34xx_sram_init() after off-idle? */ -- cgit v1.1 From 4267b5d15269ea6b26736a2ccd4c213e63e547ab Mon Sep 17 00:00:00 2001 From: Paul Walmsley <paul@pwsan.com> Date: Fri, 19 Jun 2009 19:08:27 -0600 Subject: OMAP3 SRAM: add more comments on the SRAM code Clean up comments and copyrights on the CORE DPLL3 M2 divider change code. Signed-off-by: Paul Walmsley <paul@pwsan.com> --- arch/arm/mach-omap2/sram34xx.S | 45 ++++++++++++++++++++++-------------------- 1 file changed, 24 insertions(+), 21 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S index d13f1cc4..37a1e1f 100644 --- a/arch/arm/mach-omap2/sram34xx.S +++ b/arch/arm/mach-omap2/sram34xx.S @@ -3,13 +3,12 @@ * * Omap3 specific functions that need to be run in internal SRAM * - * (C) Copyright 2007 - * Texas Instruments Inc. - * Rajendra Nayak <rnayak@ti.com> + * Copyright (C) 2004, 2007, 2008 Texas Instruments, Inc. + * Copyright (C) 2008 Nokia Corporation * - * (C) Copyright 2004 - * Texas Instruments, <www.ti.com> + * Rajendra Nayak <rnayak@ti.com> * Richard Woodruff <r-woodruff2@ti.com> + * Paul Walmsley * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -38,13 +37,16 @@ .text /* - * Change frequency of core dpll - * r0 = sdrc_rfr_ctrl r1 = sdrc_actim_ctrla r2 = sdrc_actim_ctrlb r3 = M2 - * r4 = Unlock SDRC DLL? (1 = yes, 0 = no) -- only unlock DLL for + * omap3_sram_configure_core_dpll - change DPLL3 M2 divider + * r0 = new SDRC_RFR_CTRL register contents + * r1 = new SDRC_ACTIM_CTRLA register contents + * r2 = new SDRC_ACTIM_CTRLB register contents + * r3 = new M2 divider setting (only 1 and 2 supported right now) + * r4 = unlock SDRC DLL? (1 = yes, 0 = no). Only unlock DLL for * SDRC rates < 83MHz * r5 = number of MPU cycles to wait for SDRC to stabilize after * reprogramming the SDRC when switching to a slower MPU speed - * r6 = SDRC_MR_0 register value + * r6 = new SDRC_MR_0 register value * */ ENTRY(omap3_sram_configure_core_dpll) @@ -53,22 +55,22 @@ ENTRY(omap3_sram_configure_core_dpll) ldr r5, [sp, #56] @ load extra args from the stack ldr r6, [sp, #60] @ load extra args from the stack dsb @ flush buffered writes to interconnect - cmp r3, #0x2 - blne configure_sdrc - cmp r4, #0x1 + cmp r3, #0x2 @ if increasing SDRC clk rate, + blne configure_sdrc @ program the SDRC regs early (for RFR) + cmp r4, #0x1 @ set the intended DLL state bleq unlock_dll blne lock_dll - bl sdram_in_selfrefresh @ put the SDRAM in self refresh - bl configure_core_dpll - bl enable_sdrc - cmp r4, #0x1 + bl sdram_in_selfrefresh @ put SDRAM in self refresh, idle SDRC + bl configure_core_dpll @ change the DPLL3 M2 divider + bl enable_sdrc @ take SDRC out of idle + cmp r4, #0x1 @ wait for DLL status to change bleq wait_dll_unlock blne wait_dll_lock - cmp r3, #0x1 - beq return_to_sdram - bl configure_sdrc - mov r12, r5 @ if slowing, wait for SDRC to stabilize - bl wait_clk_stable + cmp r3, #0x1 @ if increasing SDRC clk rate, + beq return_to_sdram @ return to SDRAM code, otherwise, + bl configure_sdrc @ reprogram SDRC regs now + mov r12, r5 + bl wait_clk_stable @ wait for SDRC to stabilize return_to_sdram: isb @ prevent speculative exec past here mov r0, #0 @ return value @@ -93,6 +95,7 @@ sdram_in_selfrefresh: bic r12, r12, #0x4 @ clear PWDENA str r12, [r11] @ write back to SDRC_POWER register ldr r12, [r11] @ posted-write barrier for SDRC +idle_sdrc: ldr r11, omap3_cm_iclken1_core @ read the CM_ICLKEN1_CORE reg ldr r12, [r11] bic r12, r12, #0x2 @ disable iclk bit for SDRC -- cgit v1.1 From df14e4747aa58126a508ae26661c73d83127c831 Mon Sep 17 00:00:00 2001 From: Paul Walmsley <paul@pwsan.com> Date: Fri, 19 Jun 2009 19:08:28 -0600 Subject: OMAP3 SRAM: convert SRAM code to use macros rather than magic numbers Convert omap3_sram_configure_core_dpll() to use macros rather than magic numbers. Signed-off-by: Paul Walmsley <paul@pwsan.com> --- arch/arm/mach-omap2/sram34xx.S | 53 ++++++++++++++++++++++++++++++------------ 1 file changed, 38 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S index 37a1e1f..16eb4ef 100644 --- a/arch/arm/mach-omap2/sram34xx.S +++ b/arch/arm/mach-omap2/sram34xx.S @@ -36,6 +36,29 @@ .text +/* r4 parameters */ +#define SDRC_NO_UNLOCK_DLL 0x0 +#define SDRC_UNLOCK_DLL 0x1 + +/* SDRC_DLLA_CTRL bit settings */ +#define DLLIDLE_MASK 0x4 + +/* SDRC_DLLA_STATUS bit settings */ +#define LOCKSTATUS_MASK 0x4 + +/* SDRC_POWER bit settings */ +#define SRFRONIDLEREQ_MASK 0x40 +#define PWDENA_MASK 0x4 + +/* CM_IDLEST1_CORE bit settings */ +#define ST_SDRC_MASK 0x2 + +/* CM_ICLKEN1_CORE bit settings */ +#define EN_SDRC_MASK 0x2 + +/* CM_CLKSEL1_PLL bit settings */ +#define CORE_DPLL_CLKOUT_DIV_SHIFT 0x1b + /* * omap3_sram_configure_core_dpll - change DPLL3 M2 divider * r0 = new SDRC_RFR_CTRL register contents @@ -57,13 +80,13 @@ ENTRY(omap3_sram_configure_core_dpll) dsb @ flush buffered writes to interconnect cmp r3, #0x2 @ if increasing SDRC clk rate, blne configure_sdrc @ program the SDRC regs early (for RFR) - cmp r4, #0x1 @ set the intended DLL state + cmp r4, #SDRC_UNLOCK_DLL @ set the intended DLL state bleq unlock_dll blne lock_dll bl sdram_in_selfrefresh @ put SDRAM in self refresh, idle SDRC bl configure_core_dpll @ change the DPLL3 M2 divider bl enable_sdrc @ take SDRC out of idle - cmp r4, #0x1 @ wait for DLL status to change + cmp r4, #SDRC_UNLOCK_DLL @ wait for DLL status to change bleq wait_dll_unlock blne wait_dll_lock cmp r3, #0x1 @ if increasing SDRC clk rate, @@ -78,33 +101,33 @@ return_to_sdram: unlock_dll: ldr r11, omap3_sdrc_dlla_ctrl ldr r12, [r11] - orr r12, r12, #0x4 + orr r12, r12, #DLLIDLE_MASK str r12, [r11] @ (no OCP barrier needed) bx lr lock_dll: ldr r11, omap3_sdrc_dlla_ctrl ldr r12, [r11] - bic r12, r12, #0x4 + bic r12, r12, #DLLIDLE_MASK str r12, [r11] @ (no OCP barrier needed) bx lr sdram_in_selfrefresh: ldr r11, omap3_sdrc_power @ read the SDRC_POWER register ldr r12, [r11] @ read the contents of SDRC_POWER mov r9, r12 @ keep a copy of SDRC_POWER bits - orr r12, r12, #0x40 @ enable self refresh on idle req - bic r12, r12, #0x4 @ clear PWDENA + orr r12, r12, #SRFRONIDLEREQ_MASK @ enable self refresh on idle + bic r12, r12, #PWDENA_MASK @ clear PWDENA str r12, [r11] @ write back to SDRC_POWER register ldr r12, [r11] @ posted-write barrier for SDRC idle_sdrc: ldr r11, omap3_cm_iclken1_core @ read the CM_ICLKEN1_CORE reg ldr r12, [r11] - bic r12, r12, #0x2 @ disable iclk bit for SDRC + bic r12, r12, #EN_SDRC_MASK @ disable iclk bit for SDRC str r12, [r11] wait_sdrc_idle: ldr r11, omap3_cm_idlest1_core ldr r12, [r11] - and r12, r12, #0x2 @ check for SDRC idle - cmp r12, #2 + and r12, r12, #ST_SDRC_MASK @ check for SDRC idle + cmp r12, #ST_SDRC_MASK bne wait_sdrc_idle bx lr configure_core_dpll: @@ -112,7 +135,7 @@ configure_core_dpll: ldr r12, [r11] ldr r10, core_m2_mask_val @ modify m2 for core dpll and r12, r12, r10 - orr r12, r12, r3, lsl #0x1B @ r3 contains the M2 val + orr r12, r12, r3, lsl #CORE_DPLL_CLKOUT_DIV_SHIFT str r12, [r11] ldr r12, [r11] @ posted-write barrier for CM bx lr @@ -123,12 +146,12 @@ wait_clk_stable: enable_sdrc: ldr r11, omap3_cm_iclken1_core ldr r12, [r11] - orr r12, r12, #0x2 @ enable iclk bit for SDRC + orr r12, r12, #EN_SDRC_MASK @ enable iclk bit for SDRC str r12, [r11] wait_sdrc_idle1: ldr r11, omap3_cm_idlest1_core ldr r12, [r11] - and r12, r12, #0x2 + and r12, r12, #ST_SDRC_MASK cmp r12, #0 bne wait_sdrc_idle1 restore_sdrc_power_val: @@ -138,14 +161,14 @@ restore_sdrc_power_val: wait_dll_lock: ldr r11, omap3_sdrc_dlla_status ldr r12, [r11] - and r12, r12, #0x4 - cmp r12, #0x4 + and r12, r12, #LOCKSTATUS_MASK + cmp r12, #LOCKSTATUS_MASK bne wait_dll_lock bx lr wait_dll_unlock: ldr r11, omap3_sdrc_dlla_status ldr r12, [r11] - and r12, r12, #0x4 + and r12, r12, #LOCKSTATUS_MASK cmp r12, #0x0 bne wait_dll_unlock bx lr -- cgit v1.1 From 3afec6332e1e7cf2d74e0bf08160a68f43a59073 Mon Sep 17 00:00:00 2001 From: Tero Kristo <tero.kristo@nokia.com> Date: Fri, 19 Jun 2009 19:08:29 -0600 Subject: OMAP3: Add support for DPLL3 divisor values higher than 2 Previously only 1 and 2 was supported. This is needed for DVFS VDD2 control. Signed-off-by: Tero Kristo <tero.kristo@nokia.com> --- arch/arm/mach-omap2/clock34xx.c | 9 +++------ arch/arm/mach-omap2/sram34xx.S | 8 +++++--- arch/arm/plat-omap/include/mach/sram.h | 6 ++++-- arch/arm/plat-omap/sram.c | 6 +++--- 4 files changed, 15 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index cf41ab5..045da92 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -739,9 +739,9 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) sdrcrate = sdrc_ick.rate; if (rate > clk->rate) - sdrcrate <<= ((rate / clk->rate) - 1); + sdrcrate <<= ((rate / clk->rate) >> 1); else - sdrcrate >>= ((clk->rate / rate) - 1); + sdrcrate >>= ((clk->rate / rate) >> 1); sp = omap2_sdrc_get_params(sdrcrate); if (!sp) @@ -768,12 +768,9 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) pr_debug("clock: SDRC timing params used: %08x %08x %08x\n", sp->rfr_ctrl, sp->actim_ctrla, sp->actim_ctrlb); - /* REVISIT: SRAM code doesn't support other M2 divisors yet */ - WARN_ON(new_div != 1 && new_div != 2); - omap3_configure_core_dpll(sp->rfr_ctrl, sp->actim_ctrla, sp->actim_ctrlb, new_div, unlock_dll, c, - sp->mr); + sp->mr, rate > clk->rate); return 0; } diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S index 16eb4ef..487fa86 100644 --- a/arch/arm/mach-omap2/sram34xx.S +++ b/arch/arm/mach-omap2/sram34xx.S @@ -70,6 +70,7 @@ * r5 = number of MPU cycles to wait for SDRC to stabilize after * reprogramming the SDRC when switching to a slower MPU speed * r6 = new SDRC_MR_0 register value + * r7 = increasing SDRC rate? (1 = yes, 0 = no) * */ ENTRY(omap3_sram_configure_core_dpll) @@ -77,9 +78,10 @@ ENTRY(omap3_sram_configure_core_dpll) ldr r4, [sp, #52] @ pull extra args off the stack ldr r5, [sp, #56] @ load extra args from the stack ldr r6, [sp, #60] @ load extra args from the stack + ldr r7, [sp, #64] @ load extra args from the stack dsb @ flush buffered writes to interconnect - cmp r3, #0x2 @ if increasing SDRC clk rate, - blne configure_sdrc @ program the SDRC regs early (for RFR) + cmp r7, #1 @ if increasing SDRC clk rate, + bleq configure_sdrc @ program the SDRC regs early (for RFR) cmp r4, #SDRC_UNLOCK_DLL @ set the intended DLL state bleq unlock_dll blne lock_dll @@ -89,7 +91,7 @@ ENTRY(omap3_sram_configure_core_dpll) cmp r4, #SDRC_UNLOCK_DLL @ wait for DLL status to change bleq wait_dll_unlock blne wait_dll_lock - cmp r3, #0x1 @ if increasing SDRC clk rate, + cmp r7, #1 @ if increasing SDRC clk rate, beq return_to_sdram @ return to SDRAM code, otherwise, bl configure_sdrc @ reprogram SDRC regs now mov r12, r5 diff --git a/arch/arm/plat-omap/include/mach/sram.h b/arch/arm/plat-omap/include/mach/sram.h index 4f87056..4d53cc5 100644 --- a/arch/arm/plat-omap/include/mach/sram.h +++ b/arch/arm/plat-omap/include/mach/sram.h @@ -24,7 +24,8 @@ extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass); extern u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl, u32 sdrc_actim_ctrla, u32 sdrc_actim_ctrlb, u32 m2, - u32 unlock_dll, u32 f, u32 sdrc_mr); + u32 unlock_dll, u32 f, u32 sdrc_mr, + u32 inc); /* Do not use these */ extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl); @@ -62,7 +63,8 @@ extern unsigned long omap243x_sram_reprogram_sdrc_sz; extern u32 omap3_sram_configure_core_dpll(u32 sdrc_rfr_ctrl, u32 sdrc_actim_ctrla, u32 sdrc_actim_ctrlb, u32 m2, - u32 unlock_dll, u32 f, u32 sdrc_mr); + u32 unlock_dll, u32 f, u32 sdrc_mr, + u32 inc); extern unsigned long omap3_sram_configure_core_dpll_sz; #endif diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 7dadf1a..65006df 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -372,16 +372,16 @@ static u32 (*_omap3_sram_configure_core_dpll)(u32 sdrc_rfr_ctrl, u32 sdrc_actim_ctrla, u32 sdrc_actim_ctrlb, u32 m2, u32 unlock_dll, - u32 f, u32 sdrc_mr); + u32 f, u32 sdrc_mr, u32 inc); u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl, u32 sdrc_actim_ctrla, u32 sdrc_actim_ctrlb, u32 m2, u32 unlock_dll, - u32 f, u32 sdrc_mr) + u32 f, u32 sdrc_mr, u32 inc) { BUG_ON(!_omap3_sram_configure_core_dpll); return _omap3_sram_configure_core_dpll(sdrc_rfr_ctrl, sdrc_actim_ctrla, sdrc_actim_ctrlb, m2, - unlock_dll, f, sdrc_mr); + unlock_dll, f, sdrc_mr, inc); } /* REVISIT: Should this be same as omap34xx_sram_init() after off-idle? */ -- cgit v1.1 From 7b7bcefa35d62fec64c3615a6bef7866f34c7cc9 Mon Sep 17 00:00:00 2001 From: Paul Walmsley <paul@pwsan.com> Date: Fri, 19 Jun 2009 19:08:29 -0600 Subject: OMAP3 SDRC: set FIXEDDELAY when disabling SDRC DLL Correspondence with the TI OMAP hardware team indicates that SDRC_DLLA_CTRL.FIXEDDELAY should be initialized to 0x0f. This number was apparently derived from process validation. This is only used when the SDRC DLL is unlocked (e.g., SDRC clock frequency less than 83MHz). Signed-off-by: Paul Walmsley <paul@pwsan.com> --- arch/arm/mach-omap2/sram34xx.S | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S index 487fa86..f41f8d9 100644 --- a/arch/arm/mach-omap2/sram34xx.S +++ b/arch/arm/mach-omap2/sram34xx.S @@ -41,8 +41,18 @@ #define SDRC_UNLOCK_DLL 0x1 /* SDRC_DLLA_CTRL bit settings */ +#define FIXEDDELAY_SHIFT 24 +#define FIXEDDELAY_MASK (0xff << FIXEDDELAY_SHIFT) #define DLLIDLE_MASK 0x4 +/* + * SDRC_DLLA_CTRL default values: TI hardware team indicates that + * FIXEDDELAY should be initialized to 0xf. This apparently was + * empirically determined during process testing, so no derivation + * was provided. + */ +#define FIXEDDELAY_DEFAULT (0x0f << FIXEDDELAY_SHIFT) + /* SDRC_DLLA_STATUS bit settings */ #define LOCKSTATUS_MASK 0x4 @@ -103,6 +113,8 @@ return_to_sdram: unlock_dll: ldr r11, omap3_sdrc_dlla_ctrl ldr r12, [r11] + and r12, r12, #FIXEDDELAY_MASK + orr r12, r12, #FIXEDDELAY_DEFAULT orr r12, r12, #DLLIDLE_MASK str r12, [r11] @ (no OCP barrier needed) bx lr -- cgit v1.1 From 2687069f3ac297b820c58de7222e4d16adbca498 Mon Sep 17 00:00:00 2001 From: Roel Kluin <roel.kluin@gmail.com> Date: Fri, 19 Jun 2009 19:08:30 -0600 Subject: OMAP2 clock/powerdomain: off by 1 error in loop timeout comparisons with while (i++ < MAX_CLOCK_ENABLE_WAIT); i can reach MAX_CLOCK_ENABLE_WAIT + 1 after the loop, so if (i == MAX_CLOCK_ENABLE_WAIT) that's still success. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> --- arch/arm/mach-omap2/clock.c | 2 +- arch/arm/mach-omap2/powerdomain.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index ba528f8..b0665f1 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -302,7 +302,7 @@ int omap2_wait_clock_ready(void __iomem *reg, u32 mask, const char *name) udelay(1); } - if (i < MAX_CLOCK_ENABLE_WAIT) + if (i <= MAX_CLOCK_ENABLE_WAIT) pr_debug("Clock %s stable after %d loops\n", name, i); else printk(KERN_ERR "Clock %s didn't enable in %d tries\n", diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index 73e2971..983f1cb 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -1099,7 +1099,7 @@ int pwrdm_wait_transition(struct powerdomain *pwrdm) (c++ < PWRDM_TRANSITION_BAILOUT)) udelay(1); - if (c >= PWRDM_TRANSITION_BAILOUT) { + if (c > PWRDM_TRANSITION_BAILOUT) { printk(KERN_ERR "powerdomain: waited too long for " "powerdomain %s to complete transition\n", pwrdm->name); return -EAGAIN; -- cgit v1.1 From 7b768f07dce463a054c9dd84862d15ccc3d2b712 Mon Sep 17 00:00:00 2001 From: "Pallipadi, Venkatesh" <venkatesh.pallipadi@intel.com> Date: Fri, 19 Jun 2009 17:14:59 -0700 Subject: ACPI: pdc init related memory leak with physical CPU hotplug arch_acpi_processor_cleanup_pdc() in x86 and ia64 results in memory allocated for _PDC objects that is never freed and will cause memory leak in case of physical CPU remove and add. Patch fixes the memory leak by freeing the objects soon after _PDC is evaluated. Reported-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> --- arch/ia64/kernel/acpi-processor.c | 12 ++++++++++++ arch/x86/kernel/acpi/processor.c | 13 +++++++++++++ 2 files changed, 25 insertions(+) (limited to 'arch') diff --git a/arch/ia64/kernel/acpi-processor.c b/arch/ia64/kernel/acpi-processor.c index cbe6cee..dbda7bd 100644 --- a/arch/ia64/kernel/acpi-processor.c +++ b/arch/ia64/kernel/acpi-processor.c @@ -71,3 +71,15 @@ void arch_acpi_processor_init_pdc(struct acpi_processor *pr) } EXPORT_SYMBOL(arch_acpi_processor_init_pdc); + +void arch_acpi_processor_cleanup_pdc(struct acpi_processor *pr) +{ + if (pr->pdc) { + kfree(pr->pdc->pointer->buffer.pointer); + kfree(pr->pdc->pointer); + kfree(pr->pdc); + pr->pdc = NULL; + } +} + +EXPORT_SYMBOL(arch_acpi_processor_cleanup_pdc); diff --git a/arch/x86/kernel/acpi/processor.c b/arch/x86/kernel/acpi/processor.c index 7c074ee..d296f4a 100644 --- a/arch/x86/kernel/acpi/processor.c +++ b/arch/x86/kernel/acpi/processor.c @@ -72,6 +72,7 @@ static void init_intel_pdc(struct acpi_processor *pr, struct cpuinfo_x86 *c) return; } + /* Initialize _PDC data based on the CPU vendor */ void arch_acpi_processor_init_pdc(struct acpi_processor *pr) { @@ -85,3 +86,15 @@ void arch_acpi_processor_init_pdc(struct acpi_processor *pr) } EXPORT_SYMBOL(arch_acpi_processor_init_pdc); + +void arch_acpi_processor_cleanup_pdc(struct acpi_processor *pr) +{ + if (pr->pdc) { + kfree(pr->pdc->pointer->buffer.pointer); + kfree(pr->pdc->pointer); + kfree(pr->pdc); + pr->pdc = NULL; + } +} + +EXPORT_SYMBOL(arch_acpi_processor_cleanup_pdc); -- cgit v1.1 From 20f54c490c6547049d880d3666ebb5b24e234e77 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann <arnd@arndb.de> Date: Thu, 18 Jun 2009 19:55:26 +0200 Subject: microblaze: remove init_mm Alexey removed the definition for init_mm from all architectures but forgot microblaze, which was only recently added. This fixes the microblaze build by dropping it there as well. Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michal Simek <monstr@monstr.eu> --- arch/microblaze/kernel/init_task.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/microblaze/kernel/init_task.c b/arch/microblaze/kernel/init_task.c index 48eb9fb..67da225 100644 --- a/arch/microblaze/kernel/init_task.c +++ b/arch/microblaze/kernel/init_task.c @@ -18,8 +18,6 @@ static struct signal_struct init_signals = INIT_SIGNALS(init_signals); static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand); -struct mm_struct init_mm = INIT_MM(init_mm); -EXPORT_SYMBOL(init_mm); union thread_union init_thread_union __attribute__((__section__(".data.init_task"))) = -- cgit v1.1 From 05bf7d46316df6d12c608feb2a75dd41fc3385ae Mon Sep 17 00:00:00 2001 From: Michal Simek <monstr@monstr.eu> Date: Sat, 20 Jun 2009 14:24:01 +0200 Subject: microblaze: Add missing symbols for CONSTRUCTORS support Commit b99b87f70c7785ab1e253c6220f4b0b57ce3a7f7 add CONSTRUCTOR support to Linux but Microblaze not defined KERNEL_CTORS symbols which are used with that patch. This patch fixed it. Signed-off-by: Michal Simek <monstr@monstr.eu> --- arch/microblaze/kernel/vmlinux.lds.S | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/microblaze/kernel/vmlinux.lds.S b/arch/microblaze/kernel/vmlinux.lds.S index 8ae807a..d34d38d 100644 --- a/arch/microblaze/kernel/vmlinux.lds.S +++ b/arch/microblaze/kernel/vmlinux.lds.S @@ -62,7 +62,8 @@ SECTIONS { _sdata = . ; .data ALIGN (4096) : { /* page aligned when MMU used - origin 0x4 */ - *(.data) + DATA_DATA + CONSTRUCTORS } . = ALIGN(32); .data.cacheline_aligned : { *(.data.cacheline_aligned) } @@ -98,13 +99,13 @@ SECTIONS { . = ALIGN(4096); .init.text : { _sinittext = . ; - *(.init.text) - *(.exit.text) - *(.exit.data) + INIT_TEXT _einittext = .; } - .init.data : { *(.init.data) } + .init.data : { + INIT_DATA + } . = ALIGN(4); .init.ivt : { -- cgit v1.1 From 7f8189068726492950bf1a2dcfd9b51314560abf Mon Sep 17 00:00:00 2001 From: Linus Torvalds <torvalds@linux-foundation.org> Date: Sat, 20 Jun 2009 09:52:27 -0700 Subject: x86: don't use 'access_ok()' as a range check in get_user_pages_fast() It's really not right to use 'access_ok()', since that is meant for the normal "get_user()" and "copy_from/to_user()" accesses, which are done through the TLB, rather than through the page tables. Why? access_ok() does both too few, and too many checks. Too many, because it is meant for regular kernel accesses that will not honor the 'user' bit in the page tables, and because it honors the USER_DS vs KERNEL_DS distinction that we shouldn't care about in GUP. And too few, because it doesn't do the 'canonical' check on the address on x86-64, since the TLB will do that for us. So instead of using a function that isn't meant for this, and does something else and much more complicated, just do the real rules: we don't want the range to overflow, and on x86-64, we want it to be a canonical low address (on 32-bit, all addresses are canonical). Acked-by: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> --- arch/x86/mm/gup.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/mm/gup.c b/arch/x86/mm/gup.c index 6340cef..f974809 100644 --- a/arch/x86/mm/gup.c +++ b/arch/x86/mm/gup.c @@ -247,10 +247,15 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write, start &= PAGE_MASK; addr = start; len = (unsigned long) nr_pages << PAGE_SHIFT; + end = start + len; - if (unlikely(!access_ok(write ? VERIFY_WRITE : VERIFY_READ, - (void __user *)start, len))) + if (end < start) + goto slow_irqon; + +#ifdef CONFIG_X86_64 + if (end >> __VIRTUAL_MASK_SHIFT) goto slow_irqon; +#endif /* * XXX: batch / limit 'nr', to avoid large irq off latency -- cgit v1.1 From e01916e3e7834cb51327e5e4983ff76bfce8a91f Mon Sep 17 00:00:00 2001 From: Russell King <rmk@dyn-67.arm.linux.org.uk> Date: Sat, 20 Jun 2009 22:25:45 +0100 Subject: [ARM] wire up rt_tgsigqueueinfo and perf_counter_open Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> --- arch/arm/include/asm/unistd.h | 2 ++ arch/arm/kernel/calls.S | 2 ++ 2 files changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h index 94cc58e..0e97b8c 100644 --- a/arch/arm/include/asm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -389,6 +389,8 @@ #define __NR_inotify_init1 (__NR_SYSCALL_BASE+360) #define __NR_preadv (__NR_SYSCALL_BASE+361) #define __NR_pwritev (__NR_SYSCALL_BASE+362) +#define __NR_rt_tgsigqueueinfo (__NR_SYSCALL_BASE+363) +#define __NR_perf_counter_open (__NR_SYSCALL_BASE+364) /* * The following SWIs are ARM private. diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index 1680e9e..f776e72 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -372,6 +372,8 @@ /* 360 */ CALL(sys_inotify_init1) CALL(sys_preadv) CALL(sys_pwritev) + CALL(sys_rt_tgsigqueueinfo) + CALL(sys_perf_counter_open) #ifndef syscalls_counted .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls #define syscalls_counted -- cgit v1.1 From 3eadd3b21cec340dacdc24dd1f9735344290ca62 Mon Sep 17 00:00:00 2001 From: Russell King <rmk@dyn-67.arm.linux.org.uk> Date: Sat, 20 Jun 2009 22:28:41 +0100 Subject: [ARM] Update mach-types Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> --- arch/arm/tools/mach-types | 39 +++++++++++++++++++++++++++++++++++++-- 1 file changed, 37 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index fec6467..33026ef 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -12,7 +12,7 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Fri May 29 10:14:20 2009 +# Last update: Sat Jun 20 22:28:39 2009 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -1455,7 +1455,7 @@ gba MACH_GBA GBA 1457 h6044 MACH_H6044 H6044 1458 app MACH_APP APP 1459 tct_hammer MACH_TCT_HAMMER TCT_HAMMER 1460 -herald MACH_HERMES HERMES 1461 +herald MACH_HERALD HERALD 1461 artemis MACH_ARTEMIS ARTEMIS 1462 htctitan MACH_HTCTITAN HTCTITAN 1463 qranium MACH_QRANIUM QRANIUM 1464 @@ -2245,3 +2245,38 @@ str9 MACH_STR9 STR9 2257 omap3_wl_ff MACH_OMAP3_WL_FF OMAP3_WL_FF 2258 simcom MACH_SIMCOM SIMCOM 2259 mcwebio MACH_MCWEBIO MCWEBIO 2260 +omap3_phrazer MACH_OMAP3_PHRAZER OMAP3_PHRAZER 2261 +darwin MACH_DARWIN DARWIN 2262 +oratiscomu MACH_ORATISCOMU ORATISCOMU 2263 +rtsbc20 MACH_RTSBC20 RTSBC20 2264 +i780 MACH_I780 I780 2265 +gemini324 MACH_GEMINI324 GEMINI324 2266 +oratislan MACH_ORATISLAN ORATISLAN 2267 +oratisalog MACH_ORATISALOG ORATISALOG 2268 +oratismadi MACH_ORATISMADI ORATISMADI 2269 +oratisot16 MACH_ORATISOT16 ORATISOT16 2270 +oratisdesk MACH_ORATISDESK ORATISDESK 2271 +v2p_ca9 MACH_V2P_CA9 V2P_CA9 2272 +sintexo MACH_SINTEXO SINTEXO 2273 +cm3389 MACH_CM3389 CM3389 2274 +omap3_cio MACH_OMAP3_CIO OMAP3_CIO 2275 +sgh_i900 MACH_SGH_I900 SGH_I900 2276 +bst100 MACH_BST100 BST100 2277 +passion MACH_PASSION PASSION 2278 +indesign_at91sam MACH_INDESIGN_AT91SAM INDESIGN_AT91SAM 2279 +c4_badger MACH_C4_BADGER C4_BADGER 2280 +c4_viper MACH_C4_VIPER C4_VIPER 2281 +d2net MACH_D2NET D2NET 2282 +bigdisk MACH_BIGDISK BIGDISK 2283 +notalvision MACH_NOTALVISION NOTALVISION 2284 +omap3_kboc MACH_OMAP3_KBOC OMAP3_KBOC 2285 +cyclone MACH_CYCLONE CYCLONE 2286 +ninja MACH_NINJA NINJA 2287 +at91sam9g20ek_2mmc MACH_AT91SAM9G20EK_2MMC AT91SAM9G20EK_2MMC 2288 +bcmring MACH_BCMRING BCMRING 2289 +resol_dl2 MACH_RESOL_DL2 RESOL_DL2 2290 +ifosw MACH_IFOSW IFOSW 2291 +htcrhodium MACH_HTCRHODIUM HTCRHODIUM 2292 +htctopaz MACH_HTCTOPAZ HTCTOPAZ 2293 +matrix504 MACH_MATRIX504 MATRIX504 2294 +mrfsa MACH_MRFSA MRFSA 2295 -- cgit v1.1 From 9063c61fd5cbd6f42e95929aa0e02380c9e15656 Mon Sep 17 00:00:00 2001 From: Linus Torvalds <torvalds@linux-foundation.org> Date: Sat, 20 Jun 2009 15:40:00 -0700 Subject: x86, 64-bit: Clean up user address masking The discussion about using "access_ok()" in get_user_pages_fast() (see commit 7f8189068726492950bf1a2dcfd9b51314560abf: "x86: don't use 'access_ok()' as a range check in get_user_pages_fast()" for details and end result), made us notice that x86-64 was really being very sloppy about virtual address checking. So be way more careful and straightforward about masking x86-64 virtual addresses: - All the VIRTUAL_MASK* variants now cover half of the address space, it's not like we can use the full mask on a signed integer, and the larger mask just invites mistakes when applying it to either half of the 48-bit address space. - /proc/kcore's kc_offset_to_vaddr() becomes a lot more obvious when it transforms a file offset into a (kernel-half) virtual address. - Unify/simplify the 32-bit and 64-bit USER_DS definition to be based on TASK_SIZE_MAX. This cleanup and more careful/obvious user virtual address checking also uncovered a buglet in the x86-64 implementation of strnlen_user(): it would do an "access_ok()" check on the whole potential area, even if the string itself was much shorter, and thus return an error even for valid strings. Our sloppy checking had hidden this. So this fixes 'strnlen_user()' to do this properly, the same way we already handled user strings in 'strncpy_from_user()'. Namely by just checking the first byte, and then relying on fault handling for the rest. That always works, since we impose a guard page that cannot be mapped at the end of the user space address space (and even if we didn't, we'd have the address space hole). Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Nick Piggin <npiggin@suse.de> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> --- arch/x86/include/asm/page_64_types.h | 2 +- arch/x86/include/asm/pgtable_64.h | 5 +---- arch/x86/include/asm/uaccess.h | 7 +------ arch/x86/lib/usercopy_64.c | 2 +- 4 files changed, 4 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/page_64_types.h b/arch/x86/include/asm/page_64_types.h index 8d382d3..7639dbf 100644 --- a/arch/x86/include/asm/page_64_types.h +++ b/arch/x86/include/asm/page_64_types.h @@ -41,7 +41,7 @@ /* See Documentation/x86/x86_64/mm.txt for a description of the memory map. */ #define __PHYSICAL_MASK_SHIFT 46 -#define __VIRTUAL_MASK_SHIFT 48 +#define __VIRTUAL_MASK_SHIFT 47 /* * Kernel image size is limited to 512 MB (see level2_kernel_pgt in diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h index abde308..c57a301 100644 --- a/arch/x86/include/asm/pgtable_64.h +++ b/arch/x86/include/asm/pgtable_64.h @@ -165,10 +165,7 @@ extern void cleanup_highmap(void); /* fs/proc/kcore.c */ #define kc_vaddr_to_offset(v) ((v) & __VIRTUAL_MASK) -#define kc_offset_to_vaddr(o) \ - (((o) & (1UL << (__VIRTUAL_MASK_SHIFT - 1))) \ - ? ((o) | ~__VIRTUAL_MASK) \ - : (o)) +#define kc_offset_to_vaddr(o) ((o) | ~__VIRTUAL_MASK) #define __HAVE_ARCH_PTE_SAME #endif /* !__ASSEMBLY__ */ diff --git a/arch/x86/include/asm/uaccess.h b/arch/x86/include/asm/uaccess.h index 512ee87..20e6a79 100644 --- a/arch/x86/include/asm/uaccess.h +++ b/arch/x86/include/asm/uaccess.h @@ -25,12 +25,7 @@ #define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) #define KERNEL_DS MAKE_MM_SEG(-1UL) - -#ifdef CONFIG_X86_32 -# define USER_DS MAKE_MM_SEG(PAGE_OFFSET) -#else -# define USER_DS MAKE_MM_SEG(__VIRTUAL_MASK) -#endif +#define USER_DS MAKE_MM_SEG(TASK_SIZE_MAX) #define get_ds() (KERNEL_DS) #define get_fs() (current_thread_info()->addr_limit) diff --git a/arch/x86/lib/usercopy_64.c b/arch/x86/lib/usercopy_64.c index ec13cb5..b7c2849 100644 --- a/arch/x86/lib/usercopy_64.c +++ b/arch/x86/lib/usercopy_64.c @@ -127,7 +127,7 @@ EXPORT_SYMBOL(__strnlen_user); long strnlen_user(const char __user *s, long n) { - if (!access_ok(VERIFY_READ, s, n)) + if (!access_ok(VERIFY_READ, s, 1)) return 0; return __strnlen_user(s, n); } -- cgit v1.1 From 99bd0c0fc4b04da54cb311953ef9489931c19c63 Mon Sep 17 00:00:00 2001 From: Andreas Herrmann <andreas.herrmann3@amd.com> Date: Fri, 19 Jun 2009 10:59:09 +0200 Subject: x86: Set cpu_llc_id on AMD CPUs This counts when building sched domains in case NUMA information is not available. ( See cpu_coregroup_mask() which uses llc_shared_map which in turn is created based on cpu_llc_id. ) Currently Linux builds domains as follows: (example from a dual socket quad-core system) CPU0 attaching sched-domain: domain 0: span 0-7 level CPU groups: 0 1 2 3 4 5 6 7 ... CPU7 attaching sched-domain: domain 0: span 0-7 level CPU groups: 7 0 1 2 3 4 5 6 Ever since that is borked for multi-core AMD CPU systems. This patch fixes that and now we get a proper: CPU0 attaching sched-domain: domain 0: span 0-3 level MC groups: 0 1 2 3 domain 1: span 0-7 level CPU groups: 0-3 4-7 ... CPU7 attaching sched-domain: domain 0: span 4-7 level MC groups: 7 4 5 6 domain 1: span 0-7 level CPU groups: 4-7 0-3 This allows scheduler to assign tasks to cores on different sockets (i.e. that don't share last level cache) for performance reasons. Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> LKML-Reference: <20090619085909.GJ5218@alberich.amd.com> Cc: <stable@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/kernel/cpu/amd.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index e5b27d8..28e5f59 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -258,13 +258,15 @@ static void __cpuinit amd_detect_cmp(struct cpuinfo_x86 *c) { #ifdef CONFIG_X86_HT unsigned bits; + int cpu = smp_processor_id(); bits = c->x86_coreid_bits; - /* Low order bits define the core id (index of core in socket) */ c->cpu_core_id = c->initial_apicid & ((1 << bits)-1); /* Convert the initial APIC ID into the socket ID */ c->phys_proc_id = c->initial_apicid >> bits; + /* use socket ID also for last level cache */ + per_cpu(cpu_llc_id, cpu) = c->phys_proc_id; #endif } -- cgit v1.1 From d9f2a5ecb2846d0fd368fb4c45182e43f38e4471 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput <jaswinder@kernel.org> Date: Sat, 20 Jun 2009 13:19:25 +0530 Subject: perf_counter, x8: Fix L1-data-Cache-Store-Referencees for AMD Fix AMD's Data Cache Refills from System event. After this patch : ./tools/perf/perf stat -e l1d -e l1d-misses -e l1d-write -e l1d-prefetch -e l1d-prefetch-miss -e l1i -e l1i-misses -e l1i-prefetch -e l2 -e l2-misses -e l2-write -e dtlb -e dtlb-misses -e itlb -e itlb-misses -e bpu -e bpu-misses ls /dev/ > /dev/null Performance counter stats for 'ls /dev/': 2499484 L1-data-Cache-Load-Referencees (scaled from 3.97%) 70347 L1-data-Cache-Load-Misses (scaled from 7.30%) 9360 L1-data-Cache-Store-Referencees (scaled from 8.64%) 32804 L1-data-Cache-Prefetch-Referencees (scaled from 17.72%) 7693 L1-data-Cache-Prefetch-Misses (scaled from 22.97%) 2180945 L1-instruction-Cache-Load-Referencees (scaled from 28.48%) 14518 L1-instruction-Cache-Load-Misses (scaled from 35.00%) 2405 L1-instruction-Cache-Prefetch-Referencees (scaled from 34.89%) 71387 L2-Cache-Load-Referencees (scaled from 34.94%) 18732 L2-Cache-Load-Misses (scaled from 34.92%) 79918 L2-Cache-Store-Referencees (scaled from 36.02%) 1295294 Data-TLB-Cache-Load-Referencees (scaled from 35.99%) 30896 Data-TLB-Cache-Load-Misses (scaled from 33.36%) 1222030 Instruction-TLB-Cache-Load-Referencees (scaled from 29.46%) 357 Instruction-TLB-Cache-Load-Misses (scaled from 20.46%) 530888 Branch-Cache-Load-Referencees (scaled from 11.48%) 8638 Branch-Cache-Load-Misses (scaled from 5.09%) 0.011295149 seconds time elapsed. Earlier it always shows value 0. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> LKML-Reference: <1245484165.3102.6.camel@localhost.localdomain> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/kernel/cpu/perf_counter.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c index 76dfef2..22eb3a1 100644 --- a/arch/x86/kernel/cpu/perf_counter.c +++ b/arch/x86/kernel/cpu/perf_counter.c @@ -401,7 +401,7 @@ static const u64 amd_hw_cache_event_ids [ C(RESULT_MISS) ] = 0x0041, /* Data Cache Misses */ }, [ C(OP_WRITE) ] = { - [ C(RESULT_ACCESS) ] = 0x0042, /* Data Cache Refills from L2 */ + [ C(RESULT_ACCESS) ] = 0x0142, /* Data Cache Refills :system */ [ C(RESULT_MISS) ] = 0, }, [ C(OP_PREFETCH) ] = { -- cgit v1.1 From d06063cc221fdefcab86589e79ddfdb7c0e14b63 Mon Sep 17 00:00:00 2001 From: Linus Torvalds <torvalds@linux-foundation.org> Date: Fri, 10 Apr 2009 09:01:23 -0700 Subject: Move FAULT_FLAG_xyz into handle_mm_fault() callers This allows the callers to now pass down the full set of FAULT_FLAG_xyz flags to handle_mm_fault(). All callers have been (mechanically) converted to the new calling convention, there's almost certainly room for architectures to clean up their code and then add FAULT_FLAG_RETRY when that support is added. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> --- arch/alpha/mm/fault.c | 2 +- arch/arm/mm/fault.c | 2 +- arch/avr32/mm/fault.c | 2 +- arch/cris/mm/fault.c | 2 +- arch/frv/mm/fault.c | 2 +- arch/ia64/mm/fault.c | 2 +- arch/m32r/mm/fault.c | 2 +- arch/m68k/mm/fault.c | 2 +- arch/microblaze/mm/fault.c | 2 +- arch/mips/mm/fault.c | 2 +- arch/mn10300/mm/fault.c | 2 +- arch/parisc/mm/fault.c | 2 +- arch/powerpc/mm/fault.c | 2 +- arch/powerpc/platforms/cell/spu_fault.c | 2 +- arch/s390/lib/uaccess_pt.c | 2 +- arch/s390/mm/fault.c | 2 +- arch/sh/mm/fault_32.c | 2 +- arch/sh/mm/tlbflush_64.c | 2 +- arch/sparc/mm/fault_32.c | 4 ++-- arch/sparc/mm/fault_64.c | 2 +- arch/um/kernel/trap.c | 2 +- arch/x86/mm/fault.c | 2 +- arch/xtensa/mm/fault.c | 2 +- 23 files changed, 24 insertions(+), 24 deletions(-) (limited to 'arch') diff --git a/arch/alpha/mm/fault.c b/arch/alpha/mm/fault.c index 4829f96..00a31de 100644 --- a/arch/alpha/mm/fault.c +++ b/arch/alpha/mm/fault.c @@ -146,7 +146,7 @@ do_page_fault(unsigned long address, unsigned long mmcsr, /* If for any reason at all we couldn't handle the fault, make sure we exit gracefully rather than endlessly redo the fault. */ - fault = handle_mm_fault(mm, vma, address, cause > 0); + fault = handle_mm_fault(mm, vma, address, cause > 0 ? FAULT_FLAG_WRITE : 0); up_read(&mm->mmap_sem); if (unlikely(fault & VM_FAULT_ERROR)) { if (fault & VM_FAULT_OOM) diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index 0455557..6fdcbb7 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -208,7 +208,7 @@ good_area: * than endlessly redo the fault. */ survive: - fault = handle_mm_fault(mm, vma, addr & PAGE_MASK, fsr & (1 << 11)); + fault = handle_mm_fault(mm, vma, addr & PAGE_MASK, (fsr & (1 << 11)) ? FAULT_FLAG_WRITE : 0); if (unlikely(fault & VM_FAULT_ERROR)) { if (fault & VM_FAULT_OOM) goto out_of_memory; diff --git a/arch/avr32/mm/fault.c b/arch/avr32/mm/fault.c index 62d4abb..b61d86d 100644 --- a/arch/avr32/mm/fault.c +++ b/arch/avr32/mm/fault.c @@ -133,7 +133,7 @@ good_area: * fault. */ survive: - fault = handle_mm_fault(mm, vma, address, writeaccess); + fault = handle_mm_fault(mm, vma, address, writeaccess ? FAULT_FLAG_WRITE : 0); if (unlikely(fault & VM_FAULT_ERROR)) { if (fault & VM_FAULT_OOM) goto out_of_memory; diff --git a/arch/cris/mm/fault.c b/arch/cris/mm/fault.c index c4c76db..f925115 100644 --- a/arch/cris/mm/fault.c +++ b/arch/cris/mm/fault.c @@ -163,7 +163,7 @@ do_page_fault(unsigned long address, struct pt_regs *regs, * the fault. */ - fault = handle_mm_fault(mm, vma, address, writeaccess & 1); + fault = handle_mm_fault(mm, vma, address, (writeaccess & 1) ? FAULT_FLAG_WRITE : 0); if (unlikely(fault & VM_FAULT_ERROR)) { if (fault & VM_FAULT_OOM) goto out_of_memory; diff --git a/arch/frv/mm/fault.c b/arch/frv/mm/fault.c index 05093d4..30f5d10 100644 --- a/arch/frv/mm/fault.c +++ b/arch/frv/mm/fault.c @@ -163,7 +163,7 @@ asmlinkage void do_page_fault(int datammu, unsigned long esr0, unsigned long ear * make sure we exit gracefully rather than endlessly redo * the fault. */ - fault = handle_mm_fault(mm, vma, ear0, write); + fault = handle_mm_fault(mm, vma, ear0, write ? FAULT_FLAG_WRITE : 0); if (unlikely(fault & VM_FAULT_ERROR)) { if (fault & VM_FAULT_OOM) goto out_of_memory; diff --git a/arch/ia64/mm/fault.c b/arch/ia64/mm/fault.c index 23088be..19261a9 100644 --- a/arch/ia64/mm/fault.c +++ b/arch/ia64/mm/fault.c @@ -154,7 +154,7 @@ ia64_do_page_fault (unsigned long address, unsigned long isr, struct pt_regs *re * sure we exit gracefully rather than endlessly redo the * fault. */ - fault = handle_mm_fault(mm, vma, address, (mask & VM_WRITE) != 0); + fault = handle_mm_fault(mm, vma, address, (mask & VM_WRITE) ? FAULT_FLAG_WRITE : 0); if (unlikely(fault & VM_FAULT_ERROR)) { /* * We ran out of memory, or some other thing happened diff --git a/arch/m32r/mm/fault.c b/arch/m32r/mm/fault.c index 4a71df4..7274b47 100644 --- a/arch/m32r/mm/fault.c +++ b/arch/m32r/mm/fault.c @@ -196,7 +196,7 @@ survive: */ addr = (address & PAGE_MASK); set_thread_fault_code(error_code); - fault = handle_mm_fault(mm, vma, addr, write); + fault = handle_mm_fault(mm, vma, addr, write ? FAULT_FLAG_WRITE : 0); if (unlikely(fault & VM_FAULT_ERROR)) { if (fault & VM_FAULT_OOM) goto out_of_memory; diff --git a/arch/m68k/mm/fault.c b/arch/m68k/mm/fault.c index f493f03..d0e35cf 100644 --- a/arch/m68k/mm/fault.c +++ b/arch/m68k/mm/fault.c @@ -155,7 +155,7 @@ good_area: */ survive: - fault = handle_mm_fault(mm, vma, address, write); + fault = handle_mm_fault(mm, vma, address, write ? FAULT_FLAG_WRITE : 0); #ifdef DEBUG printk("handle_mm_fault returns %d\n",fault); #endif diff --git a/arch/microblaze/mm/fault.c b/arch/microblaze/mm/fault.c index 5e67cd1..956607a 100644 --- a/arch/microblaze/mm/fault.c +++ b/arch/microblaze/mm/fault.c @@ -232,7 +232,7 @@ good_area: * the fault. */ survive: - fault = handle_mm_fault(mm, vma, address, is_write); + fault = handle_mm_fault(mm, vma, address, is_write ? FAULT_FLAG_WRITE : 0); if (unlikely(fault & VM_FAULT_ERROR)) { if (fault & VM_FAULT_OOM) goto out_of_memory; diff --git a/arch/mips/mm/fault.c b/arch/mips/mm/fault.c index 55767ad..6751ce9 100644 --- a/arch/mips/mm/fault.c +++ b/arch/mips/mm/fault.c @@ -102,7 +102,7 @@ good_area: * make sure we exit gracefully rather than endlessly redo * the fault. */ - fault = handle_mm_fault(mm, vma, address, write); + fault = handle_mm_fault(mm, vma, address, write ? FAULT_FLAG_WRITE : 0); if (unlikely(fault & VM_FAULT_ERROR)) { if (fault & VM_FAULT_OOM) goto out_of_memory; diff --git a/arch/mn10300/mm/fault.c b/arch/mn10300/mm/fault.c index 33cf250..a62e1e1 100644 --- a/arch/mn10300/mm/fault.c +++ b/arch/mn10300/mm/fault.c @@ -258,7 +258,7 @@ good_area: * make sure we exit gracefully rather than endlessly redo * the fault. */ - fault = handle_mm_fault(mm, vma, address, write); + fault = handle_mm_fault(mm, vma, address, write ? FAULT_FLAG_WRITE : 0); if (unlikely(fault & VM_FAULT_ERROR)) { if (fault & VM_FAULT_OOM) goto out_of_memory; diff --git a/arch/parisc/mm/fault.c b/arch/parisc/mm/fault.c index 92c7fa4..bfb6dd6 100644 --- a/arch/parisc/mm/fault.c +++ b/arch/parisc/mm/fault.c @@ -202,7 +202,7 @@ good_area: * fault. */ - fault = handle_mm_fault(mm, vma, address, (acc_type & VM_WRITE) != 0); + fault = handle_mm_fault(mm, vma, address, (acc_type & VM_WRITE) ? FAULT_FLAG_WRITE : 0); if (unlikely(fault & VM_FAULT_ERROR)) { /* * We hit a shared mapping outside of the file, or some diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c index 5beffc8..830bef0 100644 --- a/arch/powerpc/mm/fault.c +++ b/arch/powerpc/mm/fault.c @@ -302,7 +302,7 @@ good_area: * the fault. */ survive: - ret = handle_mm_fault(mm, vma, address, is_write); + ret = handle_mm_fault(mm, vma, address, is_write ? FAULT_FLAG_WRITE : 0); if (unlikely(ret & VM_FAULT_ERROR)) { if (ret & VM_FAULT_OOM) goto out_of_memory; diff --git a/arch/powerpc/platforms/cell/spu_fault.c b/arch/powerpc/platforms/cell/spu_fault.c index 95d8dad..d06ba87 100644 --- a/arch/powerpc/platforms/cell/spu_fault.c +++ b/arch/powerpc/platforms/cell/spu_fault.c @@ -70,7 +70,7 @@ int spu_handle_mm_fault(struct mm_struct *mm, unsigned long ea, } ret = 0; - *flt = handle_mm_fault(mm, vma, ea, is_write); + *flt = handle_mm_fault(mm, vma, ea, is_write ? FAULT_FLAG_WRITE : 0); if (unlikely(*flt & VM_FAULT_ERROR)) { if (*flt & VM_FAULT_OOM) { ret = -ENOMEM; diff --git a/arch/s390/lib/uaccess_pt.c b/arch/s390/lib/uaccess_pt.c index b0b84c3..cb5d59e 100644 --- a/arch/s390/lib/uaccess_pt.c +++ b/arch/s390/lib/uaccess_pt.c @@ -66,7 +66,7 @@ static int __handle_fault(struct mm_struct *mm, unsigned long address, } survive: - fault = handle_mm_fault(mm, vma, address, write_access); + fault = handle_mm_fault(mm, vma, address, write_access ? FAULT_FLAG_WRITE : 0); if (unlikely(fault & VM_FAULT_ERROR)) { if (fault & VM_FAULT_OOM) goto out_of_memory; diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c index 220a152..74eb26b 100644 --- a/arch/s390/mm/fault.c +++ b/arch/s390/mm/fault.c @@ -352,7 +352,7 @@ good_area: * make sure we exit gracefully rather than endlessly redo * the fault. */ - fault = handle_mm_fault(mm, vma, address, write); + fault = handle_mm_fault(mm, vma, address, write ? FAULT_FLAG_WRITE : 0); if (unlikely(fault & VM_FAULT_ERROR)) { if (fault & VM_FAULT_OOM) { up_read(&mm->mmap_sem); diff --git a/arch/sh/mm/fault_32.c b/arch/sh/mm/fault_32.c index 2c50f80..cc8ddbd 100644 --- a/arch/sh/mm/fault_32.c +++ b/arch/sh/mm/fault_32.c @@ -133,7 +133,7 @@ good_area: * the fault. */ survive: - fault = handle_mm_fault(mm, vma, address, writeaccess); + fault = handle_mm_fault(mm, vma, address, writeaccess ? FAULT_FLAG_WRITE : 0); if (unlikely(fault & VM_FAULT_ERROR)) { if (fault & VM_FAULT_OOM) goto out_of_memory; diff --git a/arch/sh/mm/tlbflush_64.c b/arch/sh/mm/tlbflush_64.c index 7876997..fcbb6e1 100644 --- a/arch/sh/mm/tlbflush_64.c +++ b/arch/sh/mm/tlbflush_64.c @@ -187,7 +187,7 @@ good_area: * the fault. */ survive: - fault = handle_mm_fault(mm, vma, address, writeaccess); + fault = handle_mm_fault(mm, vma, address, writeaccess ? FAULT_FLAG_WRITE : 0); if (unlikely(fault & VM_FAULT_ERROR)) { if (fault & VM_FAULT_OOM) goto out_of_memory; diff --git a/arch/sparc/mm/fault_32.c b/arch/sparc/mm/fault_32.c index 12e447f..a5e30c6 100644 --- a/arch/sparc/mm/fault_32.c +++ b/arch/sparc/mm/fault_32.c @@ -241,7 +241,7 @@ good_area: * make sure we exit gracefully rather than endlessly redo * the fault. */ - fault = handle_mm_fault(mm, vma, address, write); + fault = handle_mm_fault(mm, vma, address, write ? FAULT_FLAG_WRITE : 0); if (unlikely(fault & VM_FAULT_ERROR)) { if (fault & VM_FAULT_OOM) goto out_of_memory; @@ -484,7 +484,7 @@ good_area: if(!(vma->vm_flags & (VM_READ | VM_EXEC))) goto bad_area; } - switch (handle_mm_fault(mm, vma, address, write)) { + switch (handle_mm_fault(mm, vma, address, write ? FAULT_FLAG_WRITE : 0)) { case VM_FAULT_SIGBUS: case VM_FAULT_OOM: goto do_sigbus; diff --git a/arch/sparc/mm/fault_64.c b/arch/sparc/mm/fault_64.c index 4ab8993..e5620b2 100644 --- a/arch/sparc/mm/fault_64.c +++ b/arch/sparc/mm/fault_64.c @@ -398,7 +398,7 @@ good_area: goto bad_area; } - fault = handle_mm_fault(mm, vma, address, (fault_code & FAULT_CODE_WRITE)); + fault = handle_mm_fault(mm, vma, address, (fault_code & FAULT_CODE_WRITE) ? FAULT_FLAG_WRITE : 0); if (unlikely(fault & VM_FAULT_ERROR)) { if (fault & VM_FAULT_OOM) goto out_of_memory; diff --git a/arch/um/kernel/trap.c b/arch/um/kernel/trap.c index 7384d8a..637c650 100644 --- a/arch/um/kernel/trap.c +++ b/arch/um/kernel/trap.c @@ -65,7 +65,7 @@ good_area: do { int fault; - fault = handle_mm_fault(mm, vma, address, is_write); + fault = handle_mm_fault(mm, vma, address, is_write ? FAULT_FLAG_WRITE : 0); if (unlikely(fault & VM_FAULT_ERROR)) { if (fault & VM_FAULT_OOM) { goto out_of_memory; diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c index c403526..78a5fff 100644 --- a/arch/x86/mm/fault.c +++ b/arch/x86/mm/fault.c @@ -1113,7 +1113,7 @@ good_area: * make sure we exit gracefully rather than endlessly redo * the fault: */ - fault = handle_mm_fault(mm, vma, address, write); + fault = handle_mm_fault(mm, vma, address, write ? FAULT_FLAG_WRITE : 0); if (unlikely(fault & VM_FAULT_ERROR)) { mm_fault_error(regs, error_code, address, fault); diff --git a/arch/xtensa/mm/fault.c b/arch/xtensa/mm/fault.c index bdd860d..bc07333 100644 --- a/arch/xtensa/mm/fault.c +++ b/arch/xtensa/mm/fault.c @@ -106,7 +106,7 @@ good_area: * the fault. */ survive: - fault = handle_mm_fault(mm, vma, address, is_write); + fault = handle_mm_fault(mm, vma, address, is_write ? FAULT_FLAG_WRITE : 0); if (unlikely(fault & VM_FAULT_ERROR)) { if (fault & VM_FAULT_OOM) goto out_of_memory; -- cgit v1.1 From c5806df9232d2a7f554b4839b57cac2e664fc256 Mon Sep 17 00:00:00 2001 From: Tejun Heo <tj@kernel.org> Date: Mon, 22 Jun 2009 11:56:24 +0900 Subject: x86: fix duplicate free in setup_pcpu_remap() failure path In the failure path, setup_pcpu_remap() tries to free the area which has already been freed to make holes in the large page. Fix it. [ Impact: fix duplicate free in failure path ] Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> --- arch/x86/kernel/setup_percpu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c index 9c3f082..dfbc7e6 100644 --- a/arch/x86/kernel/setup_percpu.c +++ b/arch/x86/kernel/setup_percpu.c @@ -228,7 +228,7 @@ static ssize_t __init setup_pcpu_remap(size_t static_size) enomem: for_each_possible_cpu(cpu) if (pcpur_ptrs[cpu]) - free_bootmem(__pa(pcpur_ptrs[cpu]), PMD_SIZE); + free_bootmem(__pa(pcpur_ptrs[cpu]), pcpur_size); ret = -ENOMEM; out_free_ar: free_bootmem(__pa(pcpur_ptrs), ptrs_size); -- cgit v1.1 From 97c9bf0618cd40b05b4859c1f8a90d8ad97fefb2 Mon Sep 17 00:00:00 2001 From: Tejun Heo <tj@kernel.org> Date: Mon, 22 Jun 2009 11:56:24 +0900 Subject: x86: rename remap percpu first chunk allocator to lpage The "remap" allocator remaps large pages to build the first chunk; however, the name isn't very good because 4k allocator remaps too and the whole point of the remap allocator is using large page mapping. The allocator will be generalized and exported outside of x86, rename it to lpage before that happens. percpu_alloc kernel parameter is updated to accept both "remap" and "lpage" for lpage allocator. [ Impact: code cleanup, kernel parameter argument updated ] Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> --- arch/x86/kernel/setup_percpu.c | 50 +++++++++++++++++++++--------------------- 1 file changed, 25 insertions(+), 25 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c index dfbc7e6..8794c0c 100644 --- a/arch/x86/kernel/setup_percpu.c +++ b/arch/x86/kernel/setup_percpu.c @@ -124,7 +124,7 @@ static void * __init pcpu_alloc_bootmem(unsigned int cpu, unsigned long size, } /* - * Remap allocator + * Large page remap allocator * * This allocator uses PMD page as unit. A PMD page is allocated for * each cpu and each is remapped into vmalloc area using PMD mapping. @@ -137,20 +137,20 @@ static void * __init pcpu_alloc_bootmem(unsigned int cpu, unsigned long size, * better than only using 4k mappings while still being NUMA friendly. */ #ifdef CONFIG_NEED_MULTIPLE_NODES -static size_t pcpur_size __initdata; -static void **pcpur_ptrs __initdata; +static size_t pcpul_size __initdata; +static void **pcpul_ptrs __initdata; -static struct page * __init pcpur_get_page(unsigned int cpu, int pageno) +static struct page * __init pcpul_get_page(unsigned int cpu, int pageno) { size_t off = (size_t)pageno << PAGE_SHIFT; - if (off >= pcpur_size) + if (off >= pcpul_size) return NULL; - return virt_to_page(pcpur_ptrs[cpu] + off); + return virt_to_page(pcpul_ptrs[cpu] + off); } -static ssize_t __init setup_pcpu_remap(size_t static_size) +static ssize_t __init setup_pcpu_lpage(size_t static_size) { static struct vm_struct vm; size_t ptrs_size, dyn_size; @@ -170,36 +170,36 @@ static ssize_t __init setup_pcpu_remap(size_t static_size) * Currently supports only single page. Supporting multiple * pages won't be too difficult if it ever becomes necessary. */ - pcpur_size = PFN_ALIGN(static_size + PERCPU_MODULE_RESERVE + + pcpul_size = PFN_ALIGN(static_size + PERCPU_MODULE_RESERVE + PERCPU_DYNAMIC_RESERVE); - if (pcpur_size > PMD_SIZE) { + if (pcpul_size > PMD_SIZE) { pr_warning("PERCPU: static data is larger than large page, " "can't use large page\n"); return -EINVAL; } - dyn_size = pcpur_size - static_size - PERCPU_FIRST_CHUNK_RESERVE; + dyn_size = pcpul_size - static_size - PERCPU_FIRST_CHUNK_RESERVE; /* allocate pointer array and alloc large pages */ - ptrs_size = PFN_ALIGN(num_possible_cpus() * sizeof(pcpur_ptrs[0])); - pcpur_ptrs = alloc_bootmem(ptrs_size); + ptrs_size = PFN_ALIGN(num_possible_cpus() * sizeof(pcpul_ptrs[0])); + pcpul_ptrs = alloc_bootmem(ptrs_size); for_each_possible_cpu(cpu) { - pcpur_ptrs[cpu] = pcpu_alloc_bootmem(cpu, PMD_SIZE, PMD_SIZE); - if (!pcpur_ptrs[cpu]) + pcpul_ptrs[cpu] = pcpu_alloc_bootmem(cpu, PMD_SIZE, PMD_SIZE); + if (!pcpul_ptrs[cpu]) goto enomem; /* - * Only use pcpur_size bytes and give back the rest. + * Only use pcpul_size bytes and give back the rest. * * Ingo: The 2MB up-rounding bootmem is needed to make * sure the partial 2MB page is still fully RAM - it's * not well-specified to have a PAT-incompatible area * (unmapped RAM, device memory, etc.) in that hole. */ - free_bootmem(__pa(pcpur_ptrs[cpu] + pcpur_size), - PMD_SIZE - pcpur_size); + free_bootmem(__pa(pcpul_ptrs[cpu] + pcpul_size), + PMD_SIZE - pcpul_size); - memcpy(pcpur_ptrs[cpu], __per_cpu_load, static_size); + memcpy(pcpul_ptrs[cpu], __per_cpu_load, static_size); } /* allocate address and map */ @@ -212,7 +212,7 @@ static ssize_t __init setup_pcpu_remap(size_t static_size) pmd = populate_extra_pmd((unsigned long)vm.addr + cpu * PMD_SIZE); - set_pmd(pmd, pfn_pmd(page_to_pfn(virt_to_page(pcpur_ptrs[cpu])), + set_pmd(pmd, pfn_pmd(page_to_pfn(virt_to_page(pcpul_ptrs[cpu])), PAGE_KERNEL_LARGE)); } @@ -220,22 +220,22 @@ static ssize_t __init setup_pcpu_remap(size_t static_size) pr_info("PERCPU: Remapped at %p with large pages, static data " "%zu bytes\n", vm.addr, static_size); - ret = pcpu_setup_first_chunk(pcpur_get_page, static_size, + ret = pcpu_setup_first_chunk(pcpul_get_page, static_size, PERCPU_FIRST_CHUNK_RESERVE, dyn_size, PMD_SIZE, vm.addr, NULL); goto out_free_ar; enomem: for_each_possible_cpu(cpu) - if (pcpur_ptrs[cpu]) - free_bootmem(__pa(pcpur_ptrs[cpu]), pcpur_size); + if (pcpul_ptrs[cpu]) + free_bootmem(__pa(pcpul_ptrs[cpu]), pcpul_size); ret = -ENOMEM; out_free_ar: - free_bootmem(__pa(pcpur_ptrs), ptrs_size); + free_bootmem(__pa(pcpul_ptrs), ptrs_size); return ret; } #else -static ssize_t __init setup_pcpu_remap(size_t static_size) +static ssize_t __init setup_pcpu_lpage(size_t static_size) { return -EINVAL; } @@ -367,7 +367,7 @@ void __init setup_per_cpu_areas(void) * of large page mappings. Please read comments on top of * each allocator for details. */ - ret = setup_pcpu_remap(static_size); + ret = setup_pcpu_lpage(static_size); if (ret < 0) ret = setup_pcpu_embed(static_size); if (ret < 0) -- cgit v1.1 From 0ff2587fd54bd6f66bc6914ada4eb77a7e819a5b Mon Sep 17 00:00:00 2001 From: Tejun Heo <tj@kernel.org> Date: Mon, 22 Jun 2009 11:56:24 +0900 Subject: x86: prepare setup_pcpu_lpage() for pageattr fix Make the following changes in preparation of coming pageattr updates. * Define and use array of struct pcpul_ent instead of array of pointers. The only difference is ->cpu field which is set but unused yet. * Rename variables according to the above change. * Rename local variable vm to pcpul_vm and move it out of the function. [ Impact: no functional difference ] Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jan Beulich <JBeulich@novell.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ingo Molnar <mingo@elte.hu> --- arch/x86/kernel/setup_percpu.c | 58 ++++++++++++++++++++++++------------------ 1 file changed, 33 insertions(+), 25 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c index 8794c0c..7d38941 100644 --- a/arch/x86/kernel/setup_percpu.c +++ b/arch/x86/kernel/setup_percpu.c @@ -137,8 +137,14 @@ static void * __init pcpu_alloc_bootmem(unsigned int cpu, unsigned long size, * better than only using 4k mappings while still being NUMA friendly. */ #ifdef CONFIG_NEED_MULTIPLE_NODES +struct pcpul_ent { + unsigned int cpu; + void *ptr; +}; + static size_t pcpul_size __initdata; -static void **pcpul_ptrs __initdata; +static struct pcpul_ent *pcpul_map __initdata; +static struct vm_struct pcpul_vm; static struct page * __init pcpul_get_page(unsigned int cpu, int pageno) { @@ -147,13 +153,12 @@ static struct page * __init pcpul_get_page(unsigned int cpu, int pageno) if (off >= pcpul_size) return NULL; - return virt_to_page(pcpul_ptrs[cpu] + off); + return virt_to_page(pcpul_map[cpu].ptr + off); } static ssize_t __init setup_pcpu_lpage(size_t static_size) { - static struct vm_struct vm; - size_t ptrs_size, dyn_size; + size_t map_size, dyn_size; unsigned int cpu; ssize_t ret; @@ -180,12 +185,14 @@ static ssize_t __init setup_pcpu_lpage(size_t static_size) dyn_size = pcpul_size - static_size - PERCPU_FIRST_CHUNK_RESERVE; /* allocate pointer array and alloc large pages */ - ptrs_size = PFN_ALIGN(num_possible_cpus() * sizeof(pcpul_ptrs[0])); - pcpul_ptrs = alloc_bootmem(ptrs_size); + map_size = PFN_ALIGN(num_possible_cpus() * sizeof(pcpul_map[0])); + pcpul_map = alloc_bootmem(map_size); for_each_possible_cpu(cpu) { - pcpul_ptrs[cpu] = pcpu_alloc_bootmem(cpu, PMD_SIZE, PMD_SIZE); - if (!pcpul_ptrs[cpu]) + pcpul_map[cpu].cpu = cpu; + pcpul_map[cpu].ptr = pcpu_alloc_bootmem(cpu, PMD_SIZE, + PMD_SIZE); + if (!pcpul_map[cpu].ptr) goto enomem; /* @@ -196,42 +203,43 @@ static ssize_t __init setup_pcpu_lpage(size_t static_size) * not well-specified to have a PAT-incompatible area * (unmapped RAM, device memory, etc.) in that hole. */ - free_bootmem(__pa(pcpul_ptrs[cpu] + pcpul_size), + free_bootmem(__pa(pcpul_map[cpu].ptr + pcpul_size), PMD_SIZE - pcpul_size); - memcpy(pcpul_ptrs[cpu], __per_cpu_load, static_size); + memcpy(pcpul_map[cpu].ptr, __per_cpu_load, static_size); } /* allocate address and map */ - vm.flags = VM_ALLOC; - vm.size = num_possible_cpus() * PMD_SIZE; - vm_area_register_early(&vm, PMD_SIZE); + pcpul_vm.flags = VM_ALLOC; + pcpul_vm.size = num_possible_cpus() * PMD_SIZE; + vm_area_register_early(&pcpul_vm, PMD_SIZE); for_each_possible_cpu(cpu) { - pmd_t *pmd; + pmd_t *pmd, pmd_v; - pmd = populate_extra_pmd((unsigned long)vm.addr - + cpu * PMD_SIZE); - set_pmd(pmd, pfn_pmd(page_to_pfn(virt_to_page(pcpul_ptrs[cpu])), - PAGE_KERNEL_LARGE)); + pmd = populate_extra_pmd((unsigned long)pcpul_vm.addr + + cpu * PMD_SIZE); + pmd_v = pfn_pmd(page_to_pfn(virt_to_page(pcpul_map[cpu].ptr)), + PAGE_KERNEL_LARGE); + set_pmd(pmd, pmd_v); } /* we're ready, commit */ pr_info("PERCPU: Remapped at %p with large pages, static data " - "%zu bytes\n", vm.addr, static_size); + "%zu bytes\n", pcpul_vm.addr, static_size); ret = pcpu_setup_first_chunk(pcpul_get_page, static_size, PERCPU_FIRST_CHUNK_RESERVE, dyn_size, - PMD_SIZE, vm.addr, NULL); - goto out_free_ar; + PMD_SIZE, pcpul_vm.addr, NULL); + goto out_free_map; enomem: for_each_possible_cpu(cpu) - if (pcpul_ptrs[cpu]) - free_bootmem(__pa(pcpul_ptrs[cpu]), pcpul_size); + if (pcpul_map[cpu].ptr) + free_bootmem(__pa(pcpul_map[cpu].ptr), pcpul_size); ret = -ENOMEM; -out_free_ar: - free_bootmem(__pa(pcpul_ptrs), ptrs_size); +out_free_map: + free_bootmem(__pa(pcpul_map), map_size); return ret; } #else -- cgit v1.1 From 992f4c1c2c1583cef3296ec4bf5205843a9a5f3d Mon Sep 17 00:00:00 2001 From: Tejun Heo <tj@kernel.org> Date: Mon, 22 Jun 2009 11:56:24 +0900 Subject: x86: reorganize cpa_process_alias() Reorganize cpa_process_alias() so that new alias condition can be added easily. Jan Beulich spotted problem in the original cleanup thread which incorrectly assumed the two existing conditions were mutially exclusive. [ Impact: code reorganization ] Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jan Beulich <JBeulich@novell.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ingo Molnar <mingo@elte.hu> --- arch/x86/mm/pageattr.c | 50 +++++++++++++++++++++++--------------------------- 1 file changed, 23 insertions(+), 27 deletions(-) (limited to 'arch') diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c index 3cfe9ce..2ab058b 100644 --- a/arch/x86/mm/pageattr.c +++ b/arch/x86/mm/pageattr.c @@ -681,8 +681,9 @@ static int __change_page_attr_set_clr(struct cpa_data *cpa, int checkalias); static int cpa_process_alias(struct cpa_data *cpa) { struct cpa_data alias_cpa; - int ret = 0; - unsigned long temp_cpa_vaddr, vaddr; + unsigned long laddr = (unsigned long)__va(cpa->pfn << PAGE_SHIFT); + unsigned long vaddr; + int ret; if (cpa->pfn >= max_pfn_mapped) return 0; @@ -706,42 +707,37 @@ static int cpa_process_alias(struct cpa_data *cpa) PAGE_OFFSET + (max_pfn_mapped << PAGE_SHIFT)))) { alias_cpa = *cpa; - temp_cpa_vaddr = (unsigned long) __va(cpa->pfn << PAGE_SHIFT); - alias_cpa.vaddr = &temp_cpa_vaddr; + alias_cpa.vaddr = &laddr; alias_cpa.flags &= ~(CPA_PAGES_ARRAY | CPA_ARRAY); - ret = __change_page_attr_set_clr(&alias_cpa, 0); + if (ret) + return ret; } #ifdef CONFIG_X86_64 - if (ret) - return ret; /* - * No need to redo, when the primary call touched the high - * mapping already: - */ - if (within(vaddr, (unsigned long) _text, _brk_end)) - return 0; - - /* - * If the physical address is inside the kernel map, we need + * If the primary call didn't touch the high mapping already + * and the physical address is inside the kernel map, we need * to touch the high mapped kernel as well: */ - if (!within(cpa->pfn, highmap_start_pfn(), highmap_end_pfn())) - return 0; - - alias_cpa = *cpa; - temp_cpa_vaddr = (cpa->pfn << PAGE_SHIFT) + __START_KERNEL_map - phys_base; - alias_cpa.vaddr = &temp_cpa_vaddr; - alias_cpa.flags &= ~(CPA_PAGES_ARRAY | CPA_ARRAY); + if (!within(vaddr, (unsigned long)_text, _brk_end) && + within(cpa->pfn, highmap_start_pfn(), highmap_end_pfn())) { + unsigned long temp_cpa_vaddr = (cpa->pfn << PAGE_SHIFT) + + __START_KERNEL_map - phys_base; + alias_cpa = *cpa; + alias_cpa.vaddr = &temp_cpa_vaddr; + alias_cpa.flags &= ~(CPA_PAGES_ARRAY | CPA_ARRAY); - /* - * The high mapping range is imprecise, so ignore the return value. - */ - __change_page_attr_set_clr(&alias_cpa, 0); + /* + * The high mapping range is imprecise, so ignore the + * return value. + */ + __change_page_attr_set_clr(&alias_cpa, 0); + } #endif - return ret; + + return 0; } static int __change_page_attr_set_clr(struct cpa_data *cpa, int checkalias) -- cgit v1.1 From e59a1bb2fdfb745c685f5b40ffbed126331d3223 Mon Sep 17 00:00:00 2001 From: Tejun Heo <tj@kernel.org> Date: Mon, 22 Jun 2009 11:56:24 +0900 Subject: x86: fix pageattr handling for lpage percpu allocator and re-enable it lpage allocator aliases a PMD page for each cpu and returns whatever is unused to the page allocator. When the pageattr of the recycled pages are changed, this makes the two aliases point to the overlapping regions with different attributes which isn't allowed and known to cause subtle data corruption in certain cases. This can be handled in simliar manner to the x86_64 highmap alias. pageattr code should detect if the target pages have PMD alias and split the PMD alias and synchronize the attributes. pcpur allocator is updated to keep the allocated PMD pages map sorted in ascending address order and provide pcpu_lpage_remapped() function which binary searches the array to determine whether the given address is aliased and if so to which address. pageattr is updated to use pcpu_lpage_remapped() to detect the PMD alias and split it up as necessary from cpa_process_alias(). Jan Beulich spotted the original problem and incorrect usage of vaddr instead of laddr for lookup. With this, lpage percpu allocator should work correctly. Re-enable it. [ Impact: fix subtle lpage pageattr bug and re-enable lpage ] Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Jan Beulich <JBeulich@novell.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ingo Molnar <mingo@elte.hu> --- arch/x86/include/asm/percpu.h | 10 ++++++ arch/x86/kernel/setup_percpu.c | 72 ++++++++++++++++++++++++++++++++++++------ arch/x86/mm/pageattr.c | 21 +++++++++++- 3 files changed, 93 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h index 02ecb30..103f1dd 100644 --- a/arch/x86/include/asm/percpu.h +++ b/arch/x86/include/asm/percpu.h @@ -42,6 +42,7 @@ #else /* ...!ASSEMBLY */ +#include <linux/kernel.h> #include <linux/stringify.h> #ifdef CONFIG_SMP @@ -155,6 +156,15 @@ do { \ /* We can use this directly for local CPU (faster). */ DECLARE_PER_CPU(unsigned long, this_cpu_off); +#ifdef CONFIG_NEED_MULTIPLE_NODES +void *pcpu_lpage_remapped(void *kaddr); +#else +static inline void *pcpu_lpage_remapped(void *kaddr) +{ + return NULL; +} +#endif + #endif /* !__ASSEMBLY__ */ #ifdef CONFIG_SMP diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c index 7d38941..bad2fd2 100644 --- a/arch/x86/kernel/setup_percpu.c +++ b/arch/x86/kernel/setup_percpu.c @@ -142,8 +142,8 @@ struct pcpul_ent { void *ptr; }; -static size_t pcpul_size __initdata; -static struct pcpul_ent *pcpul_map __initdata; +static size_t pcpul_size; +static struct pcpul_ent *pcpul_map; static struct vm_struct pcpul_vm; static struct page * __init pcpul_get_page(unsigned int cpu, int pageno) @@ -160,15 +160,14 @@ static ssize_t __init setup_pcpu_lpage(size_t static_size) { size_t map_size, dyn_size; unsigned int cpu; + int i, j; ssize_t ret; /* * If large page isn't supported, there's no benefit in doing * this. Also, on non-NUMA, embedding is better. - * - * NOTE: disabled for now. */ - if (true || !cpu_has_pse || !pcpu_need_numa()) + if (!cpu_has_pse || !pcpu_need_numa()) return -EINVAL; /* @@ -231,16 +230,71 @@ static ssize_t __init setup_pcpu_lpage(size_t static_size) ret = pcpu_setup_first_chunk(pcpul_get_page, static_size, PERCPU_FIRST_CHUNK_RESERVE, dyn_size, PMD_SIZE, pcpul_vm.addr, NULL); - goto out_free_map; + + /* sort pcpul_map array for pcpu_lpage_remapped() */ + for (i = 0; i < num_possible_cpus() - 1; i++) + for (j = i + 1; j < num_possible_cpus(); j++) + if (pcpul_map[i].ptr > pcpul_map[j].ptr) { + struct pcpul_ent tmp = pcpul_map[i]; + pcpul_map[i] = pcpul_map[j]; + pcpul_map[j] = tmp; + } + + return ret; enomem: for_each_possible_cpu(cpu) if (pcpul_map[cpu].ptr) free_bootmem(__pa(pcpul_map[cpu].ptr), pcpul_size); - ret = -ENOMEM; -out_free_map: free_bootmem(__pa(pcpul_map), map_size); - return ret; + return -ENOMEM; +} + +/** + * pcpu_lpage_remapped - determine whether a kaddr is in pcpul recycled area + * @kaddr: the kernel address in question + * + * Determine whether @kaddr falls in the pcpul recycled area. This is + * used by pageattr to detect VM aliases and break up the pcpu PMD + * mapping such that the same physical page is not mapped under + * different attributes. + * + * The recycled area is always at the tail of a partially used PMD + * page. + * + * RETURNS: + * Address of corresponding remapped pcpu address if match is found; + * otherwise, NULL. + */ +void *pcpu_lpage_remapped(void *kaddr) +{ + void *pmd_addr = (void *)((unsigned long)kaddr & PMD_MASK); + unsigned long offset = (unsigned long)kaddr & ~PMD_MASK; + int left = 0, right = num_possible_cpus() - 1; + int pos; + + /* pcpul in use at all? */ + if (!pcpul_map) + return NULL; + + /* okay, perform binary search */ + while (left <= right) { + pos = (left + right) / 2; + + if (pcpul_map[pos].ptr < pmd_addr) + left = pos + 1; + else if (pcpul_map[pos].ptr > pmd_addr) + right = pos - 1; + else { + /* it shouldn't be in the area for the first chunk */ + WARN_ON(offset < pcpul_size); + + return pcpul_vm.addr + + pcpul_map[pos].cpu * PMD_SIZE + offset; + } + } + + return NULL; } #else static ssize_t __init setup_pcpu_lpage(size_t static_size) diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c index 2ab058b..1b734d7 100644 --- a/arch/x86/mm/pageattr.c +++ b/arch/x86/mm/pageattr.c @@ -11,6 +11,7 @@ #include <linux/interrupt.h> #include <linux/seq_file.h> #include <linux/debugfs.h> +#include <linux/pfn.h> #include <asm/e820.h> #include <asm/processor.h> @@ -682,7 +683,7 @@ static int cpa_process_alias(struct cpa_data *cpa) { struct cpa_data alias_cpa; unsigned long laddr = (unsigned long)__va(cpa->pfn << PAGE_SHIFT); - unsigned long vaddr; + unsigned long vaddr, remapped; int ret; if (cpa->pfn >= max_pfn_mapped) @@ -737,6 +738,24 @@ static int cpa_process_alias(struct cpa_data *cpa) } #endif + /* + * If the PMD page was partially used for per-cpu remapping, + * the recycled area needs to be split and modified. Because + * the area is always proper subset of a PMD page + * cpa->numpages is guaranteed to be 1 for these areas, so + * there's no need to loop over and check for further remaps. + */ + remapped = (unsigned long)pcpu_lpage_remapped((void *)laddr); + if (remapped) { + WARN_ON(cpa->numpages > 1); + alias_cpa = *cpa; + alias_cpa.vaddr = &remapped; + alias_cpa.flags &= ~(CPA_PAGES_ARRAY | CPA_ARRAY); + ret = __change_page_attr_set_clr(&alias_cpa, 0); + if (ret) + return ret; + } + return 0; } -- cgit v1.1 From fa8a7094ba1679b4b9b443e0ac9f5e046c79ee8d Mon Sep 17 00:00:00 2001 From: Tejun Heo <tj@kernel.org> Date: Mon, 22 Jun 2009 11:56:24 +0900 Subject: x86: implement percpu_alloc kernel parameter According to Andi, it isn't clear whether lpage allocator is worth the trouble as there are many processors where PMD TLB is far scarcer than PTE TLB. The advantage or disadvantage probably depends on the actual size of percpu area and specific processor. As performance degradation due to TLB pressure tends to be highly workload specific and subtle, it is difficult to decide which way to go without more data. This patch implements percpu_alloc kernel parameter to allow selecting which first chunk allocator to use to ease debugging and testing. While at it, make sure all the failure paths report why something failed to help determining why certain allocator isn't working. Also, kill the "Great future plan" comment which had already been realized quite some time ago. [ Impact: allow explicit percpu first chunk allocator selection ] Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Jan Beulich <JBeulich@novell.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ingo Molnar <mingo@elte.hu> --- arch/x86/kernel/setup_percpu.c | 69 ++++++++++++++++++++++++++++++------------ 1 file changed, 50 insertions(+), 19 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c index bad2fd2..165ebd5 100644 --- a/arch/x86/kernel/setup_percpu.c +++ b/arch/x86/kernel/setup_percpu.c @@ -156,20 +156,23 @@ static struct page * __init pcpul_get_page(unsigned int cpu, int pageno) return virt_to_page(pcpul_map[cpu].ptr + off); } -static ssize_t __init setup_pcpu_lpage(size_t static_size) +static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen) { size_t map_size, dyn_size; unsigned int cpu; int i, j; ssize_t ret; - /* - * If large page isn't supported, there's no benefit in doing - * this. Also, on non-NUMA, embedding is better. - */ - if (!cpu_has_pse || !pcpu_need_numa()) + /* on non-NUMA, embedding is better */ + if (!chosen && !pcpu_need_numa()) return -EINVAL; + /* need PSE */ + if (!cpu_has_pse) { + pr_warning("PERCPU: lpage allocator requires PSE\n"); + return -EINVAL; + } + /* * Currently supports only single page. Supporting multiple * pages won't be too difficult if it ever becomes necessary. @@ -191,8 +194,11 @@ static ssize_t __init setup_pcpu_lpage(size_t static_size) pcpul_map[cpu].cpu = cpu; pcpul_map[cpu].ptr = pcpu_alloc_bootmem(cpu, PMD_SIZE, PMD_SIZE); - if (!pcpul_map[cpu].ptr) + if (!pcpul_map[cpu].ptr) { + pr_warning("PERCPU: failed to allocate large page " + "for cpu%u\n", cpu); goto enomem; + } /* * Only use pcpul_size bytes and give back the rest. @@ -297,7 +303,7 @@ void *pcpu_lpage_remapped(void *kaddr) return NULL; } #else -static ssize_t __init setup_pcpu_lpage(size_t static_size) +static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen) { return -EINVAL; } @@ -311,7 +317,7 @@ static ssize_t __init setup_pcpu_lpage(size_t static_size) * mapping so that it can use PMD mapping without additional TLB * pressure. */ -static ssize_t __init setup_pcpu_embed(size_t static_size) +static ssize_t __init setup_pcpu_embed(size_t static_size, bool chosen) { size_t reserve = PERCPU_MODULE_RESERVE + PERCPU_DYNAMIC_RESERVE; @@ -320,7 +326,7 @@ static ssize_t __init setup_pcpu_embed(size_t static_size) * this. Also, embedding allocation doesn't play well with * NUMA. */ - if (!cpu_has_pse || pcpu_need_numa()) + if (!chosen && (!cpu_has_pse || pcpu_need_numa())) return -EINVAL; return pcpu_embed_first_chunk(static_size, PERCPU_FIRST_CHUNK_RESERVE, @@ -370,8 +376,11 @@ static ssize_t __init setup_pcpu_4k(size_t static_size) void *ptr; ptr = pcpu_alloc_bootmem(cpu, PAGE_SIZE, PAGE_SIZE); - if (!ptr) + if (!ptr) { + pr_warning("PERCPU: failed to allocate " + "4k page for cpu%u\n", cpu); goto enomem; + } memcpy(ptr, __per_cpu_load + i * PAGE_SIZE, PAGE_SIZE); pcpu4k_pages[j++] = virt_to_page(ptr); @@ -395,6 +404,16 @@ out_free_ar: return ret; } +/* for explicit first chunk allocator selection */ +static char pcpu_chosen_alloc[16] __initdata; + +static int __init percpu_alloc_setup(char *str) +{ + strncpy(pcpu_chosen_alloc, str, sizeof(pcpu_chosen_alloc) - 1); + return 0; +} +early_param("percpu_alloc", percpu_alloc_setup); + static inline void setup_percpu_segment(int cpu) { #ifdef CONFIG_X86_32 @@ -408,11 +427,6 @@ static inline void setup_percpu_segment(int cpu) #endif } -/* - * Great future plan: - * Declare PDA itself and support (irqstack,tss,pgd) as per cpu data. - * Always point %gs to its beginning - */ void __init setup_per_cpu_areas(void) { size_t static_size = __per_cpu_end - __per_cpu_start; @@ -429,9 +443,26 @@ void __init setup_per_cpu_areas(void) * of large page mappings. Please read comments on top of * each allocator for details. */ - ret = setup_pcpu_lpage(static_size); - if (ret < 0) - ret = setup_pcpu_embed(static_size); + ret = -EINVAL; + if (strlen(pcpu_chosen_alloc)) { + if (strcmp(pcpu_chosen_alloc, "4k")) { + if (!strcmp(pcpu_chosen_alloc, "lpage")) + ret = setup_pcpu_lpage(static_size, true); + else if (!strcmp(pcpu_chosen_alloc, "embed")) + ret = setup_pcpu_embed(static_size, true); + else + pr_warning("PERCPU: unknown allocator %s " + "specified\n", pcpu_chosen_alloc); + if (ret < 0) + pr_warning("PERCPU: %s allocator failed (%zd), " + "falling back to 4k\n", + pcpu_chosen_alloc, ret); + } + } else { + ret = setup_pcpu_lpage(static_size, false); + if (ret < 0) + ret = setup_pcpu_embed(static_size, false); + } if (ret < 0) ret = setup_pcpu_4k(static_size); if (ret < 0) -- cgit v1.1 From 0017c869ddcb73069905d09f9e98e68627466237 Mon Sep 17 00:00:00 2001 From: Tejun Heo <tj@kernel.org> Date: Mon, 22 Jun 2009 11:56:24 +0900 Subject: x86: ensure percpu lpage doesn't consume too much vmalloc space On extreme configuration (e.g. 32bit 32-way NUMA machine), lpage percpu first chunk allocator can consume too much of vmalloc space. Make it fall back to 4k allocator if the consumption goes over 20%. [ Impact: add sanity check for lpage percpu first chunk allocator ] Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Jan Beulich <JBeulich@novell.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ingo Molnar <mingo@elte.hu> --- arch/x86/kernel/setup_percpu.c | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c index 165ebd5..29a3eef 100644 --- a/arch/x86/kernel/setup_percpu.c +++ b/arch/x86/kernel/setup_percpu.c @@ -163,9 +163,21 @@ static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen) int i, j; ssize_t ret; - /* on non-NUMA, embedding is better */ - if (!chosen && !pcpu_need_numa()) - return -EINVAL; + if (!chosen) { + size_t vm_size = VMALLOC_END - VMALLOC_START; + size_t tot_size = num_possible_cpus() * PMD_SIZE; + + /* on non-NUMA, embedding is better */ + if (!pcpu_need_numa()) + return -EINVAL; + + /* don't consume more than 20% of vmalloc area */ + if (tot_size > vm_size / 5) { + pr_info("PERCPU: too large chunk size %zuMB for " + "large page remap\n", tot_size >> 20); + return -EINVAL; + } + } /* need PSE */ if (!cpu_has_pse) { -- cgit v1.1 From bd974240c9a7c6c560504bf390cd8985a16b68f6 Mon Sep 17 00:00:00 2001 From: Oskar Schirmer <os@emlix.com> Date: Wed, 10 Jun 2009 12:58:45 -0700 Subject: xtensa: cache inquiry and unaligned cache handling functions The existing xtensa cache handling functions work on page-aligned memory regions. These functions are needed for the s6000 dma engine which can work on a byte-granularity. Signed-off-by: Oskar Schirmer <os@emlix.com> Cc: Johannes Weiner <jw@emlix.com> Cc: Daniel Glockner <dg@emlix.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Chris Zankel <chris@zankel.net> --- arch/xtensa/include/asm/cacheflush.h | 95 ++++++++++++++++++++++++++++++++++++ 1 file changed, 95 insertions(+) (limited to 'arch') diff --git a/arch/xtensa/include/asm/cacheflush.h b/arch/xtensa/include/asm/cacheflush.h index 8fc1c0c..b7b8fbe 100644 --- a/arch/xtensa/include/asm/cacheflush.h +++ b/arch/xtensa/include/asm/cacheflush.h @@ -155,5 +155,100 @@ extern void copy_from_user_page(struct vm_area_struct*, struct page*, #endif +#define XTENSA_CACHEBLK_LOG2 29 +#define XTENSA_CACHEBLK_SIZE (1 << XTENSA_CACHEBLK_LOG2) +#define XTENSA_CACHEBLK_MASK (7 << XTENSA_CACHEBLK_LOG2) + +#if XCHAL_HAVE_CACHEATTR +static inline u32 xtensa_get_cacheattr(void) +{ + u32 r; + asm volatile(" rsr %0, CACHEATTR" : "=a"(r)); + return r; +} + +static inline u32 xtensa_get_dtlb1(u32 addr) +{ + u32 r = addr & XTENSA_CACHEBLK_MASK; + return r | ((xtensa_get_cacheattr() >> (r >> (XTENSA_CACHEBLK_LOG2-2))) + & 0xF); +} +#else +static inline u32 xtensa_get_dtlb1(u32 addr) +{ + u32 r; + asm volatile(" rdtlb1 %0, %1" : "=a"(r) : "a"(addr)); + asm volatile(" dsync"); + return r; +} + +static inline u32 xtensa_get_cacheattr(void) +{ + u32 r = 0; + u32 a = 0; + do { + a -= XTENSA_CACHEBLK_SIZE; + r = (r << 4) | (xtensa_get_dtlb1(a) & 0xF); + } while (a); + return r; +} +#endif + +static inline int xtensa_need_flush_dma_source(u32 addr) +{ + return (xtensa_get_dtlb1(addr) & ((1 << XCHAL_CA_BITS) - 1)) >= 4; +} + +static inline int xtensa_need_invalidate_dma_destination(u32 addr) +{ + return (xtensa_get_dtlb1(addr) & ((1 << XCHAL_CA_BITS) - 1)) != 2; +} + +static inline void flush_dcache_unaligned(u32 addr, u32 size) +{ + u32 cnt; + if (size) { + cnt = (size + ((XCHAL_DCACHE_LINESIZE - 1) & addr) + + XCHAL_DCACHE_LINESIZE - 1) / XCHAL_DCACHE_LINESIZE; + while (cnt--) { + asm volatile(" dhwb %0, 0" : : "a"(addr)); + addr += XCHAL_DCACHE_LINESIZE; + } + asm volatile(" dsync"); + } +} + +static inline void invalidate_dcache_unaligned(u32 addr, u32 size) +{ + int cnt; + if (size) { + asm volatile(" dhwbi %0, 0 ;" : : "a"(addr)); + cnt = (size + ((XCHAL_DCACHE_LINESIZE - 1) & addr) + - XCHAL_DCACHE_LINESIZE - 1) / XCHAL_DCACHE_LINESIZE; + while (cnt-- > 0) { + asm volatile(" dhi %0, %1" : : "a"(addr), + "n"(XCHAL_DCACHE_LINESIZE)); + addr += XCHAL_DCACHE_LINESIZE; + } + asm volatile(" dhwbi %0, %1" : : "a"(addr), + "n"(XCHAL_DCACHE_LINESIZE)); + asm volatile(" dsync"); + } +} + +static inline void flush_invalidate_dcache_unaligned(u32 addr, u32 size) +{ + u32 cnt; + if (size) { + cnt = (size + ((XCHAL_DCACHE_LINESIZE - 1) & addr) + + XCHAL_DCACHE_LINESIZE - 1) / XCHAL_DCACHE_LINESIZE; + while (cnt--) { + asm volatile(" dhwbi %0, 0" : : "a"(addr)); + addr += XCHAL_DCACHE_LINESIZE; + } + asm volatile(" dsync"); + } +} + #endif /* __KERNEL__ */ #endif /* _XTENSA_CACHEFLUSH_H */ -- cgit v1.1 From 1beee21030ed3dc39a41c7b524dbc1a318b518bd Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Daniel=20Gl=C3=B6ckner?= <dg@emlix.com> Date: Tue, 5 May 2009 15:03:21 +0000 Subject: xtensa: allow variant to initialize own irq chips MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit There was already a PLATFORM_NR_IRQS define, which is now accompanied by a VARIANT_NR_IRQS. To be able to initialize these interrupts, init_IRQ now calls a variant specific hook. Changes compared to v1: - adapted to new CONFIG_VARIANT_IRQ_EXT - removed definition and call of platform_init_IRQ as there already is a platform_init_irq defined in asm/platform.h with a weak default in kernel/platform.c - renamed variant_init_IRQ to variant_init_irq Note that I could not find the call site of platform_init_irq although it is stated in platform.h that it is called from init_IRQ. Signed-off-by: Daniel Glöckner <dg@emlix.com> Signed-off-by: Chris Zankel <chris@zankel.net> --- arch/xtensa/include/asm/irq.h | 12 +++++++++++- arch/xtensa/kernel/irq.c | 2 ++ 2 files changed, 13 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/xtensa/include/asm/irq.h b/arch/xtensa/include/asm/irq.h index dfac82d..4c0ccc9 100644 --- a/arch/xtensa/include/asm/irq.h +++ b/arch/xtensa/include/asm/irq.h @@ -11,6 +11,7 @@ #ifndef _XTENSA_IRQ_H #define _XTENSA_IRQ_H +#include <linux/init.h> #include <platform/hardware.h> #include <variant/core.h> @@ -21,11 +22,20 @@ static inline void variant_irq_enable(unsigned int irq) { } static inline void variant_irq_disable(unsigned int irq) { } #endif +#ifndef VARIANT_NR_IRQS +# define VARIANT_NR_IRQS 0 +#endif #ifndef PLATFORM_NR_IRQS # define PLATFORM_NR_IRQS 0 #endif #define XTENSA_NR_IRQS XCHAL_NUM_INTERRUPTS -#define NR_IRQS (XTENSA_NR_IRQS + PLATFORM_NR_IRQS) +#define NR_IRQS (XTENSA_NR_IRQS + VARIANT_NR_IRQS + PLATFORM_NR_IRQS) + +#if VARIANT_NR_IRQS == 0 +static inline void variant_init_irq(void) { } +#else +void variant_init_irq(void) __init; +#endif static __inline__ int irq_canonicalize(int irq) { diff --git a/arch/xtensa/kernel/irq.c b/arch/xtensa/kernel/irq.c index a36c85ed..a1badb3 100644 --- a/arch/xtensa/kernel/irq.c +++ b/arch/xtensa/kernel/irq.c @@ -197,4 +197,6 @@ void __init init_IRQ(void) } cached_irq_mask = 0; + + variant_init_irq(); } -- cgit v1.1 From f24e552c2dc3221dc7bd2296fd8a705283c4b2d7 Mon Sep 17 00:00:00 2001 From: Oskar Schirmer <os@emlix.com> Date: Wed, 10 Jun 2009 12:58:45 -0700 Subject: xtensa: s6000 dma engine support There are four slightly different dma engines on the s6000 family. One for memory-memory transfers, the other three for memory-device. This patch implements a platform-specific kernel-API to control these engines. It is needed for the network, video, audio peripherals on s6000. Signed-off-by: Oskar Schirmer <os@emlix.com> Signed-off-by: Daniel Glockner <dg@emlix.com> Signed-off-by: Fabian Godehardt <fg@emlix.com> Cc: Daniel Glockner <dg@emlix.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Chris Zankel <chris@zankel.net> --- arch/xtensa/variants/s6000/Makefile | 2 +- arch/xtensa/variants/s6000/dmac.c | 173 ++++++++++ arch/xtensa/variants/s6000/include/variant/dmac.h | 387 ++++++++++++++++++++++ 3 files changed, 561 insertions(+), 1 deletion(-) create mode 100644 arch/xtensa/variants/s6000/dmac.c create mode 100644 arch/xtensa/variants/s6000/include/variant/dmac.h (limited to 'arch') diff --git a/arch/xtensa/variants/s6000/Makefile b/arch/xtensa/variants/s6000/Makefile index d83f380..3e7ef0a 100644 --- a/arch/xtensa/variants/s6000/Makefile +++ b/arch/xtensa/variants/s6000/Makefile @@ -1,4 +1,4 @@ # s6000 Makefile -obj-y += irq.o gpio.o +obj-y += irq.o gpio.o dmac.o obj-$(CONFIG_XTENSA_CALIBRATE_CCOUNT) += delay.o diff --git a/arch/xtensa/variants/s6000/dmac.c b/arch/xtensa/variants/s6000/dmac.c new file mode 100644 index 0000000..dc7f7c5 --- /dev/null +++ b/arch/xtensa/variants/s6000/dmac.c @@ -0,0 +1,173 @@ +/* + * Authors: Oskar Schirmer <os@emlix.com> + * Daniel Gloeckner <dg@emlix.com> + * (c) 2008 emlix GmbH http://www.emlix.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/io.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/spinlock.h> +#include <asm/cacheflush.h> +#include <variant/dmac.h> + +/* DMA engine lookup */ + +struct s6dmac_ctrl s6dmac_ctrl[S6_DMAC_NB]; + + +/* DMA control, per engine */ + +void s6dmac_put_fifo_cache(u32 dmac, int chan, u32 src, u32 dst, u32 size) +{ + if (xtensa_need_flush_dma_source(src)) { + u32 base = src; + u32 span = size; + u32 chunk = readl(DMA_CHNL(dmac, chan) + S6_DMA_CMONCHUNK); + if (chunk && (size > chunk)) { + s32 skip = + readl(DMA_CHNL(dmac, chan) + S6_DMA_SRCSKIP); + u32 gaps = (size+chunk-1)/chunk - 1; + if (skip >= 0) { + span += gaps * skip; + } else if (-skip > chunk) { + s32 decr = gaps * (chunk + skip); + base += decr; + span = chunk - decr; + } else { + span = max(span + gaps * skip, + (chunk + skip) * gaps - skip); + } + } + flush_dcache_unaligned(base, span); + } + if (xtensa_need_invalidate_dma_destination(dst)) { + u32 base = dst; + u32 span = size; + u32 chunk = readl(DMA_CHNL(dmac, chan) + S6_DMA_CMONCHUNK); + if (chunk && (size > chunk)) { + s32 skip = + readl(DMA_CHNL(dmac, chan) + S6_DMA_DSTSKIP); + u32 gaps = (size+chunk-1)/chunk - 1; + if (skip >= 0) { + span += gaps * skip; + } else if (-skip > chunk) { + s32 decr = gaps * (chunk + skip); + base += decr; + span = chunk - decr; + } else { + span = max(span + gaps * skip, + (chunk + skip) * gaps - skip); + } + } + invalidate_dcache_unaligned(base, span); + } + s6dmac_put_fifo(dmac, chan, src, dst, size); +} + +void s6dmac_disable_error_irqs(u32 dmac, u32 mask) +{ + unsigned long flags; + spinlock_t *spinl = &s6dmac_ctrl[_dmac_addr_index(dmac)].lock; + spin_lock_irqsave(spinl, flags); + _s6dmac_disable_error_irqs(dmac, mask); + spin_unlock_irqrestore(spinl, flags); +} + +u32 s6dmac_int_sources(u32 dmac, u32 channel) +{ + u32 mask, ret, tmp; + mask = 1 << channel; + + tmp = readl(dmac + S6_DMA_TERMCNTIRQSTAT); + tmp &= mask; + writel(tmp, dmac + S6_DMA_TERMCNTIRQCLR); + ret = tmp >> channel; + + tmp = readl(dmac + S6_DMA_PENDCNTIRQSTAT); + tmp &= mask; + writel(tmp, dmac + S6_DMA_PENDCNTIRQCLR); + ret |= (tmp >> channel) << 1; + + tmp = readl(dmac + S6_DMA_LOWWMRKIRQSTAT); + tmp &= mask; + writel(tmp, dmac + S6_DMA_LOWWMRKIRQCLR); + ret |= (tmp >> channel) << 2; + + tmp = readl(dmac + S6_DMA_INTRAW0); + tmp &= (mask << S6_DMA_INT0_OVER) | (mask << S6_DMA_INT0_UNDER); + writel(tmp, dmac + S6_DMA_INTCLEAR0); + + if (tmp & (mask << S6_DMA_INT0_UNDER)) + ret |= 1 << 3; + if (tmp & (mask << S6_DMA_INT0_OVER)) + ret |= 1 << 4; + + tmp = readl(dmac + S6_DMA_MASTERERRINFO); + mask <<= S6_DMA_INT1_CHANNEL; + if (((tmp >> S6_DMA_MASTERERR_CHAN(0)) & S6_DMA_MASTERERR_CHAN_MASK) + == channel) + mask |= 1 << S6_DMA_INT1_MASTER; + if (((tmp >> S6_DMA_MASTERERR_CHAN(1)) & S6_DMA_MASTERERR_CHAN_MASK) + == channel) + mask |= 1 << (S6_DMA_INT1_MASTER + 1); + if (((tmp >> S6_DMA_MASTERERR_CHAN(2)) & S6_DMA_MASTERERR_CHAN_MASK) + == channel) + mask |= 1 << (S6_DMA_INT1_MASTER + 2); + + tmp = readl(dmac + S6_DMA_INTRAW1) & mask; + writel(tmp, dmac + S6_DMA_INTCLEAR1); + ret |= ((tmp >> channel) & 1) << 5; + ret |= ((tmp >> S6_DMA_INT1_MASTER) & S6_DMA_INT1_MASTER_MASK) << 6; + + return ret; +} + +void s6dmac_release_chan(u32 dmac, int chan) +{ + if (chan >= 0) + s6dmac_disable_chan(dmac, chan); +} + + +/* global init */ + +static inline void __init dmac_init(u32 dmac, u8 chan_nb) +{ + s6dmac_ctrl[S6_DMAC_INDEX(dmac)].dmac = dmac; + spin_lock_init(&s6dmac_ctrl[S6_DMAC_INDEX(dmac)].lock); + s6dmac_ctrl[S6_DMAC_INDEX(dmac)].chan_nb = chan_nb; + writel(S6_DMA_INT1_MASTER_MASK << S6_DMA_INT1_MASTER, + dmac + S6_DMA_INTCLEAR1); +} + +static inline void __init dmac_master(u32 dmac, + u32 m0start, u32 m0end, u32 m1start, u32 m1end) +{ + writel(m0start, dmac + S6_DMA_MASTER0START); + writel(m0end - 1, dmac + S6_DMA_MASTER0END); + writel(m1start, dmac + S6_DMA_MASTER1START); + writel(m1end - 1, dmac + S6_DMA_MASTER1END); +} + +static void __init s6_dmac_init(void) +{ + dmac_init(S6_REG_LMSDMA, S6_LMSDMA_NB); + dmac_master(S6_REG_LMSDMA, + S6_MEM_DDR, S6_MEM_PCIE_APER, S6_MEM_EFI, S6_MEM_GMAC); + dmac_init(S6_REG_NIDMA, S6_NIDMA_NB); + dmac_init(S6_REG_DPDMA, S6_DPDMA_NB); + dmac_master(S6_REG_DPDMA, + S6_MEM_DDR, S6_MEM_PCIE_APER, S6_REG_DP, S6_REG_DPDMA); + dmac_init(S6_REG_HIFDMA, S6_HIFDMA_NB); + dmac_master(S6_REG_HIFDMA, + S6_MEM_GMAC, S6_MEM_PCIE_CFG, S6_MEM_PCIE_APER, S6_MEM_AUX); +} + +arch_initcall(s6_dmac_init); diff --git a/arch/xtensa/variants/s6000/include/variant/dmac.h b/arch/xtensa/variants/s6000/include/variant/dmac.h new file mode 100644 index 0000000..89ab948 --- /dev/null +++ b/arch/xtensa/variants/s6000/include/variant/dmac.h @@ -0,0 +1,387 @@ +/* + * include/asm-xtensa/variant-s6000/dmac.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2006 Tensilica Inc. + * Copyright (C) 2008 Emlix GmbH <info@emlix.com> + * Authors: Fabian Godehardt <fg@emlix.com> + * Oskar Schirmer <os@emlix.com> + * Daniel Gloeckner <dg@emlix.com> + */ + +#ifndef __ASM_XTENSA_S6000_DMAC_H +#define __ASM_XTENSA_S6000_DMAC_H +#include <linux/io.h> +#include <variant/hardware.h> + +/* DMA global */ + +#define S6_DMA_INTSTAT0 0x000 +#define S6_DMA_INTSTAT1 0x004 +#define S6_DMA_INTENABLE0 0x008 +#define S6_DMA_INTENABLE1 0x00C +#define S6_DMA_INTRAW0 0x010 +#define S6_DMA_INTRAW1 0x014 +#define S6_DMA_INTCLEAR0 0x018 +#define S6_DMA_INTCLEAR1 0x01C +#define S6_DMA_INTSET0 0x020 +#define S6_DMA_INTSET1 0x024 +#define S6_DMA_INT0_UNDER 0 +#define S6_DMA_INT0_OVER 16 +#define S6_DMA_INT1_CHANNEL 0 +#define S6_DMA_INT1_MASTER 16 +#define S6_DMA_INT1_MASTER_MASK 7 +#define S6_DMA_TERMCNTIRQSTAT 0x028 +#define S6_DMA_TERMCNTIRQCLR 0x02C +#define S6_DMA_TERMCNTIRQSET 0x030 +#define S6_DMA_PENDCNTIRQSTAT 0x034 +#define S6_DMA_PENDCNTIRQCLR 0x038 +#define S6_DMA_PENDCNTIRQSET 0x03C +#define S6_DMA_LOWWMRKIRQSTAT 0x040 +#define S6_DMA_LOWWMRKIRQCLR 0x044 +#define S6_DMA_LOWWMRKIRQSET 0x048 +#define S6_DMA_MASTERERRINFO 0x04C +#define S6_DMA_MASTERERR_CHAN(n) (4*(n)) +#define S6_DMA_MASTERERR_CHAN_MASK 0xF +#define S6_DMA_DESCRFIFO0 0x050 +#define S6_DMA_DESCRFIFO1 0x054 +#define S6_DMA_DESCRFIFO2 0x058 +#define S6_DMA_DESCRFIFO2_AUTODISABLE 24 +#define S6_DMA_DESCRFIFO3 0x05C +#define S6_DMA_MASTER0START 0x060 +#define S6_DMA_MASTER0END 0x064 +#define S6_DMA_MASTER1START 0x068 +#define S6_DMA_MASTER1END 0x06C +#define S6_DMA_NEXTFREE 0x070 +#define S6_DMA_NEXTFREE_CHAN 0 +#define S6_DMA_NEXTFREE_CHAN_MASK 0x1F +#define S6_DMA_NEXTFREE_ENA 16 +#define S6_DMA_NEXTFREE_ENA_MASK ((1 << 16) - 1) +#define S6_DMA_DPORTCTRLGRP(p) ((p) * 4 + 0x074) +#define S6_DMA_DPORTCTRLGRP_FRAMEREP 0 +#define S6_DMA_DPORTCTRLGRP_NRCHANS 1 +#define S6_DMA_DPORTCTRLGRP_NRCHANS_1 0 +#define S6_DMA_DPORTCTRLGRP_NRCHANS_3 1 +#define S6_DMA_DPORTCTRLGRP_NRCHANS_4 2 +#define S6_DMA_DPORTCTRLGRP_NRCHANS_2 3 +#define S6_DMA_DPORTCTRLGRP_ENA 31 + + +/* DMA per channel */ + +#define DMA_CHNL(dmac, n) ((dmac) + 0x1000 + (n) * 0x100) +#define DMA_INDEX_CHNL(addr) (((addr) >> 8) & 0xF) +#define DMA_MASK_DMAC(addr) ((addr) & 0xFFFF0000) +#define S6_DMA_CHNCTRL 0x000 +#define S6_DMA_CHNCTRL_ENABLE 0 +#define S6_DMA_CHNCTRL_PAUSE 1 +#define S6_DMA_CHNCTRL_PRIO 2 +#define S6_DMA_CHNCTRL_PRIO_MASK 3 +#define S6_DMA_CHNCTRL_PERIPHXFER 4 +#define S6_DMA_CHNCTRL_PERIPHENA 5 +#define S6_DMA_CHNCTRL_SRCINC 6 +#define S6_DMA_CHNCTRL_DSTINC 7 +#define S6_DMA_CHNCTRL_BURSTLOG 8 +#define S6_DMA_CHNCTRL_BURSTLOG_MASK 7 +#define S6_DMA_CHNCTRL_DESCFIFODEPTH 12 +#define S6_DMA_CHNCTRL_DESCFIFODEPTH_MASK 0x1F +#define S6_DMA_CHNCTRL_DESCFIFOFULL 17 +#define S6_DMA_CHNCTRL_BWCONSEL 18 +#define S6_DMA_CHNCTRL_BWCONENA 19 +#define S6_DMA_CHNCTRL_PENDGCNTSTAT 20 +#define S6_DMA_CHNCTRL_PENDGCNTSTAT_MASK 0x3F +#define S6_DMA_CHNCTRL_LOWWMARK 26 +#define S6_DMA_CHNCTRL_LOWWMARK_MASK 0xF +#define S6_DMA_CHNCTRL_TSTAMP 30 +#define S6_DMA_TERMCNTNB 0x004 +#define S6_DMA_TERMCNTNB_MASK 0xFFFF +#define S6_DMA_TERMCNTTMO 0x008 +#define S6_DMA_TERMCNTSTAT 0x00C +#define S6_DMA_TERMCNTSTAT_MASK 0xFF +#define S6_DMA_CMONCHUNK 0x010 +#define S6_DMA_SRCSKIP 0x014 +#define S6_DMA_DSTSKIP 0x018 +#define S6_DMA_CUR_SRC 0x024 +#define S6_DMA_CUR_DST 0x028 +#define S6_DMA_TIMESTAMP 0x030 + +/* DMA channel lists */ + +#define S6_DPDMA_CHAN(stream, channel) (4 * (stream) + (channel)) +#define S6_DPDMA_NB 16 + +#define S6_HIFDMA_GMACTX 0 +#define S6_HIFDMA_GMACRX 1 +#define S6_HIFDMA_I2S0 2 +#define S6_HIFDMA_I2S1 3 +#define S6_HIFDMA_EGIB 4 +#define S6_HIFDMA_PCITX 5 +#define S6_HIFDMA_PCIRX 6 +#define S6_HIFDMA_NB 7 + +#define S6_NIDMA_NB 4 + +#define S6_LMSDMA_NB 12 + +/* controller access */ + +#define S6_DMAC_NB 4 +#define S6_DMAC_INDEX(dmac) (((unsigned)(dmac) >> 18) % S6_DMAC_NB) + +struct s6dmac_ctrl { + u32 dmac; + spinlock_t lock; + u8 chan_nb; +}; + +extern struct s6dmac_ctrl s6dmac_ctrl[S6_DMAC_NB]; + + +/* DMA control, per channel */ + +static inline int s6dmac_fifo_full(u32 dmac, int chan) +{ + return (readl(DMA_CHNL(dmac, chan) + S6_DMA_CHNCTRL) + & (1 << S6_DMA_CHNCTRL_DESCFIFOFULL)) && 1; +} + +static inline int s6dmac_termcnt_irq(u32 dmac, int chan) +{ + u32 m = 1 << chan; + int r = (readl(dmac + S6_DMA_TERMCNTIRQSTAT) & m) && 1; + if (r) + writel(m, dmac + S6_DMA_TERMCNTIRQCLR); + return r; +} + +static inline int s6dmac_pendcnt_irq(u32 dmac, int chan) +{ + u32 m = 1 << chan; + int r = (readl(dmac + S6_DMA_PENDCNTIRQSTAT) & m) && 1; + if (r) + writel(m, dmac + S6_DMA_PENDCNTIRQCLR); + return r; +} + +static inline int s6dmac_lowwmark_irq(u32 dmac, int chan) +{ + int r = (readl(dmac + S6_DMA_LOWWMRKIRQSTAT) & (1 << chan)) ? 1 : 0; + if (r) + writel(1 << chan, dmac + S6_DMA_LOWWMRKIRQCLR); + return r; +} + +static inline u32 s6dmac_pending_count(u32 dmac, int chan) +{ + return (readl(DMA_CHNL(dmac, chan) + S6_DMA_CHNCTRL) + >> S6_DMA_CHNCTRL_PENDGCNTSTAT) + & S6_DMA_CHNCTRL_PENDGCNTSTAT_MASK; +} + +static inline void s6dmac_set_terminal_count(u32 dmac, int chan, u32 n) +{ + n &= S6_DMA_TERMCNTNB_MASK; + n |= readl(DMA_CHNL(dmac, chan) + S6_DMA_TERMCNTNB) + & ~S6_DMA_TERMCNTNB_MASK; + writel(n, DMA_CHNL(dmac, chan) + S6_DMA_TERMCNTNB); +} + +static inline u32 s6dmac_get_terminal_count(u32 dmac, int chan) +{ + return (readl(DMA_CHNL(dmac, chan) + S6_DMA_TERMCNTNB)) + & S6_DMA_TERMCNTNB_MASK; +} + +static inline u32 s6dmac_timestamp(u32 dmac, int chan) +{ + return readl(DMA_CHNL(dmac, chan) + S6_DMA_TIMESTAMP); +} + +static inline u32 s6dmac_cur_src(u32 dmac, int chan) +{ + return readl(DMA_CHNL(dmac, chan) + S6_DMA_CUR_SRC); +} + +static inline u32 s6dmac_cur_dst(u32 dmac, int chan) +{ + return readl(DMA_CHNL(dmac, chan) + S6_DMA_CUR_DST); +} + +static inline void s6dmac_disable_chan(u32 dmac, int chan) +{ + u32 ctrl; + writel(readl(DMA_CHNL(dmac, chan) + S6_DMA_CHNCTRL) + & ~(1 << S6_DMA_CHNCTRL_ENABLE), + DMA_CHNL(dmac, chan) + S6_DMA_CHNCTRL); + do + ctrl = readl(DMA_CHNL(dmac, chan) + S6_DMA_CHNCTRL); + while (ctrl & (1 << S6_DMA_CHNCTRL_ENABLE)); +} + +static inline void s6dmac_set_stride_skip(u32 dmac, int chan, + int comchunk, /* 0: disable scatter/gather */ + int srcskip, int dstskip) +{ + writel(comchunk, DMA_CHNL(dmac, chan) + S6_DMA_CMONCHUNK); + writel(srcskip, DMA_CHNL(dmac, chan) + S6_DMA_SRCSKIP); + writel(dstskip, DMA_CHNL(dmac, chan) + S6_DMA_DSTSKIP); +} + +static inline void s6dmac_enable_chan(u32 dmac, int chan, + int prio, /* 0 (highest) .. 3 (lowest) */ + int periphxfer, /* <0: disable p.req.line, 0..1: mode */ + int srcinc, int dstinc, /* 0: dont increment src/dst address */ + int comchunk, /* 0: disable scatter/gather */ + int srcskip, int dstskip, + int burstsize, /* 4 for I2S, 7 for everything else */ + int bandwidthconserve, /* <0: disable, 0..1: select */ + int lowwmark, /* 0..15 */ + int timestamp, /* 0: disable timestamp */ + int enable) /* 0: disable for now */ +{ + writel(1, DMA_CHNL(dmac, chan) + S6_DMA_TERMCNTNB); + writel(0, DMA_CHNL(dmac, chan) + S6_DMA_TERMCNTTMO); + writel(lowwmark << S6_DMA_CHNCTRL_LOWWMARK, + DMA_CHNL(dmac, chan) + S6_DMA_CHNCTRL); + s6dmac_set_stride_skip(dmac, chan, comchunk, srcskip, dstskip); + writel(((enable ? 1 : 0) << S6_DMA_CHNCTRL_ENABLE) | + (prio << S6_DMA_CHNCTRL_PRIO) | + (((periphxfer > 0) ? 1 : 0) << S6_DMA_CHNCTRL_PERIPHXFER) | + (((periphxfer < 0) ? 0 : 1) << S6_DMA_CHNCTRL_PERIPHENA) | + ((srcinc ? 1 : 0) << S6_DMA_CHNCTRL_SRCINC) | + ((dstinc ? 1 : 0) << S6_DMA_CHNCTRL_DSTINC) | + (burstsize << S6_DMA_CHNCTRL_BURSTLOG) | + (((bandwidthconserve > 0) ? 1 : 0) << S6_DMA_CHNCTRL_BWCONSEL) | + (((bandwidthconserve < 0) ? 0 : 1) << S6_DMA_CHNCTRL_BWCONENA) | + (lowwmark << S6_DMA_CHNCTRL_LOWWMARK) | + ((timestamp ? 1 : 0) << S6_DMA_CHNCTRL_TSTAMP), + DMA_CHNL(dmac, chan) + S6_DMA_CHNCTRL); +} + + +/* DMA control, per engine */ + +static inline unsigned _dmac_addr_index(u32 dmac) +{ + unsigned i = S6_DMAC_INDEX(dmac); + if (s6dmac_ctrl[i].dmac != dmac) + BUG(); + return i; +} + +static inline void _s6dmac_disable_error_irqs(u32 dmac, u32 mask) +{ + writel(mask, dmac + S6_DMA_TERMCNTIRQCLR); + writel(mask, dmac + S6_DMA_PENDCNTIRQCLR); + writel(mask, dmac + S6_DMA_LOWWMRKIRQCLR); + writel(readl(dmac + S6_DMA_INTENABLE0) + & ~((mask << S6_DMA_INT0_UNDER) | (mask << S6_DMA_INT0_OVER)), + dmac + S6_DMA_INTENABLE0); + writel(readl(dmac + S6_DMA_INTENABLE1) & ~(mask << S6_DMA_INT1_CHANNEL), + dmac + S6_DMA_INTENABLE1); + writel((mask << S6_DMA_INT0_UNDER) | (mask << S6_DMA_INT0_OVER), + dmac + S6_DMA_INTCLEAR0); + writel(mask << S6_DMA_INT1_CHANNEL, dmac + S6_DMA_INTCLEAR1); +} + +/* + * request channel from specified engine + * with chan<0, accept any channel + * further parameters see s6dmac_enable_chan + * returns < 0 upon error, channel nb otherwise + */ +static inline int s6dmac_request_chan(u32 dmac, int chan, + int prio, + int periphxfer, + int srcinc, int dstinc, + int comchunk, + int srcskip, int dstskip, + int burstsize, + int bandwidthconserve, + int lowwmark, + int timestamp, + int enable) +{ + int r = chan; + unsigned long flags; + spinlock_t *spinl = &s6dmac_ctrl[_dmac_addr_index(dmac)].lock; + spin_lock_irqsave(spinl, flags); + if (r < 0) { + r = (readl(dmac + S6_DMA_NEXTFREE) >> S6_DMA_NEXTFREE_CHAN) + & S6_DMA_NEXTFREE_CHAN_MASK; + } + if (r >= s6dmac_ctrl[_dmac_addr_index(dmac)].chan_nb) { + if (chan < 0) + r = -EBUSY; + else + r = -ENXIO; + } else if (((readl(dmac + S6_DMA_NEXTFREE) >> S6_DMA_NEXTFREE_ENA) + >> r) & 1) { + r = -EBUSY; + } else { + s6dmac_enable_chan(dmac, r, prio, periphxfer, + srcinc, dstinc, comchunk, srcskip, dstskip, burstsize, + bandwidthconserve, lowwmark, timestamp, enable); + } + spin_unlock_irqrestore(spinl, flags); + return r; +} + +static inline void s6dmac_put_fifo(u32 dmac, int chan, + u32 src, u32 dst, u32 size) +{ + unsigned long flags; + spinlock_t *spinl = &s6dmac_ctrl[_dmac_addr_index(dmac)].lock; + spin_lock_irqsave(spinl, flags); + writel(src, dmac + S6_DMA_DESCRFIFO0); + writel(dst, dmac + S6_DMA_DESCRFIFO1); + writel(size, dmac + S6_DMA_DESCRFIFO2); + writel(chan, dmac + S6_DMA_DESCRFIFO3); + spin_unlock_irqrestore(spinl, flags); +} + +static inline u32 s6dmac_channel_enabled(u32 dmac, int chan) +{ + return readl(DMA_CHNL(dmac, chan) + S6_DMA_CHNCTRL) & + (1 << S6_DMA_CHNCTRL_ENABLE); +} + +/* + * group 1-4 data port channels + * with port=0..3, nrch=1-4 channels, + * frrep=0/1 (dis- or enable frame repeat) + */ +static inline void s6dmac_dp_setup_group(u32 dmac, int port, + int nrch, int frrep) +{ + const static u8 mask[4] = {0, 3, 1, 2}; + BUG_ON(dmac != S6_REG_DPDMA); + if ((port < 0) || (port > 3) || (nrch < 1) || (nrch > 4)) + return; + writel((mask[nrch - 1] << S6_DMA_DPORTCTRLGRP_NRCHANS) + | ((frrep ? 1 : 0) << S6_DMA_DPORTCTRLGRP_FRAMEREP), + dmac + S6_DMA_DPORTCTRLGRP(port)); +} + +static inline void s6dmac_dp_switch_group(u32 dmac, int port, int enable) +{ + u32 tmp; + BUG_ON(dmac != S6_REG_DPDMA); + tmp = readl(dmac + S6_DMA_DPORTCTRLGRP(port)); + if (enable) + tmp |= (1 << S6_DMA_DPORTCTRLGRP_ENA); + else + tmp &= ~(1 << S6_DMA_DPORTCTRLGRP_ENA); + writel(tmp, dmac + S6_DMA_DPORTCTRLGRP(port)); +} + +extern void s6dmac_put_fifo_cache(u32 dmac, int chan, + u32 src, u32 dst, u32 size); +extern void s6dmac_disable_error_irqs(u32 dmac, u32 mask); +extern u32 s6dmac_int_sources(u32 dmac, u32 channel); +extern void s6dmac_release_chan(u32 dmac, int chan); + +#endif /* __ASM_XTENSA_S6000_DMAC_H */ -- cgit v1.1 From 0b3eb21b2f2222c4c1e3e21fc3cd427404d3991a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Daniel=20Gl=C3=B6ckner?= <dg@emlix.com> Date: Tue, 5 May 2009 15:03:22 +0000 Subject: xtensa: support s6000 gpio irqs and alternate function selection MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Implement an irq chip to handle interrupts via gpio. The GPIO chip initialization function now takes a bitmask denoting pins that should be configured for their alternate function. changes compared to v1: - fixed bug on edge interrupt configuration - accommodated to function name change - moved definition of VARIANT_NR_IRQS to this patch - renamed __XTENSA_S6000_IRQ_H to _XTENSA_S6000_IRQ_H as requested Signed-off-by: Daniel Glöckner <dg@emlix.com> Signed-off-by: Johannes Weiner <jw@emlix.com> Signed-off-by: Chris Zankel <chris@zankel.net> --- arch/xtensa/include/asm/gpio.h | 8 +- arch/xtensa/platforms/s6105/setup.c | 2 +- arch/xtensa/variants/s6000/gpio.c | 163 +++++++++++++++++++++- arch/xtensa/variants/s6000/include/variant/gpio.h | 2 +- arch/xtensa/variants/s6000/include/variant/irq.h | 6 +- 5 files changed, 171 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/xtensa/include/asm/gpio.h b/arch/xtensa/include/asm/gpio.h index 0763b07..a8c9fc4 100644 --- a/arch/xtensa/include/asm/gpio.h +++ b/arch/xtensa/include/asm/gpio.h @@ -38,14 +38,14 @@ static inline int gpio_cansleep(unsigned int gpio) return __gpio_cansleep(gpio); } -/* - * Not implemented, yet. - */ static inline int gpio_to_irq(unsigned int gpio) { - return -ENOSYS; + return __gpio_to_irq(gpio); } +/* + * Not implemented, yet. + */ static inline int irq_to_gpio(unsigned int irq) { return -EINVAL; diff --git a/arch/xtensa/platforms/s6105/setup.c b/arch/xtensa/platforms/s6105/setup.c index 855ddea..95fa23c 100644 --- a/arch/xtensa/platforms/s6105/setup.c +++ b/arch/xtensa/platforms/s6105/setup.c @@ -49,7 +49,7 @@ void __init platform_setup(char **cmdline) void __init platform_init(bp_tag_t *first) { - s6_gpio_init(); + s6_gpio_init(0); gpio_request(GPIO_LED1_NGREEN, "led1_green"); gpio_request(GPIO_LED1_RED, "led1_red"); gpio_direction_output(GPIO_LED1_NGREEN, 1); diff --git a/arch/xtensa/variants/s6000/gpio.c b/arch/xtensa/variants/s6000/gpio.c index 79317fd..380a70f 100644 --- a/arch/xtensa/variants/s6000/gpio.c +++ b/arch/xtensa/variants/s6000/gpio.c @@ -4,15 +4,20 @@ * Copyright (c) 2009 emlix GmbH * Authors: Oskar Schirmer <os@emlix.com> * Johannes Weiner <jw@emlix.com> + * Daniel Gloeckner <dg@emlix.com> */ +#include <linux/bitops.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/init.h> #include <linux/io.h> +#include <linux/irq.h> #include <linux/gpio.h> #include <variant/hardware.h> +#define IRQ_BASE XTENSA_NR_IRQS + #define S6_GPIO_DATA 0x000 #define S6_GPIO_IS 0x404 #define S6_GPIO_IBE 0x408 @@ -52,19 +57,175 @@ static void set(struct gpio_chip *chip, unsigned int off, int val) writeb(val ? ~0 : 0, S6_REG_GPIO + S6_GPIO_DATA + S6_GPIO_OFFSET(off)); } +static int to_irq(struct gpio_chip *chip, unsigned offset) +{ + if (offset < 8) + return offset + IRQ_BASE; + return -EINVAL; +} + static struct gpio_chip gpiochip = { .owner = THIS_MODULE, .direction_input = direction_input, .get = get, .direction_output = direction_output, .set = set, + .to_irq = to_irq, .base = 0, .ngpio = 24, .can_sleep = 0, /* no blocking io needed */ .exported = 0, /* no exporting to userspace */ }; -int s6_gpio_init(void) +int s6_gpio_init(u32 afsel) { + writeb(afsel, S6_REG_GPIO + S6_GPIO_BANK(0) + S6_GPIO_AFSEL); + writeb(afsel >> 8, S6_REG_GPIO + S6_GPIO_BANK(1) + S6_GPIO_AFSEL); + writeb(afsel >> 16, S6_REG_GPIO + S6_GPIO_BANK(2) + S6_GPIO_AFSEL); return gpiochip_add(&gpiochip); } + +static void ack(unsigned int irq) +{ + writeb(1 << (irq - IRQ_BASE), S6_REG_GPIO + S6_GPIO_IC); +} + +static void mask(unsigned int irq) +{ + u8 r = readb(S6_REG_GPIO + S6_GPIO_IE); + r &= ~(1 << (irq - IRQ_BASE)); + writeb(r, S6_REG_GPIO + S6_GPIO_IE); +} + +static void unmask(unsigned int irq) +{ + u8 m = readb(S6_REG_GPIO + S6_GPIO_IE); + m |= 1 << (irq - IRQ_BASE); + writeb(m, S6_REG_GPIO + S6_GPIO_IE); +} + +static int set_type(unsigned int irq, unsigned int type) +{ + const u8 m = 1 << (irq - IRQ_BASE); + irq_flow_handler_t handler; + struct irq_desc *desc; + u8 reg; + + if (type == IRQ_TYPE_PROBE) { + if ((readb(S6_REG_GPIO + S6_GPIO_BANK(0) + S6_GPIO_AFSEL) & m) + || (readb(S6_REG_GPIO + S6_GPIO_BANK(0) + S6_GPIO_IE) & m) + || readb(S6_REG_GPIO + S6_GPIO_BANK(0) + S6_GPIO_DIR + + S6_GPIO_MASK(irq - IRQ_BASE))) + return 0; + type = IRQ_TYPE_EDGE_BOTH; + } + + reg = readb(S6_REG_GPIO + S6_GPIO_BANK(0) + S6_GPIO_IS); + if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH)) { + reg |= m; + handler = handle_level_irq; + } else { + reg &= ~m; + handler = handle_edge_irq; + } + writeb(reg, S6_REG_GPIO + S6_GPIO_BANK(0) + S6_GPIO_IS); + desc = irq_to_desc(irq); + desc->handle_irq = handler; + + reg = readb(S6_REG_GPIO + S6_GPIO_BANK(0) + S6_GPIO_IEV); + if (type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)) + reg |= m; + else + reg &= ~m; + writeb(reg, S6_REG_GPIO + S6_GPIO_BANK(0) + S6_GPIO_IEV); + + reg = readb(S6_REG_GPIO + S6_GPIO_BANK(0) + S6_GPIO_IBE); + if ((type & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH) + reg |= m; + else + reg &= ~m; + writeb(reg, S6_REG_GPIO + S6_GPIO_BANK(0) + S6_GPIO_IBE); + return 0; +} + +static struct irq_chip gpioirqs = { + .name = "GPIO", + .ack = ack, + .mask = mask, + .unmask = unmask, + .set_type = set_type, +}; + +static u8 demux_masks[4]; + +static void demux_irqs(unsigned int irq, struct irq_desc *desc) +{ + u8 *mask = get_irq_desc_data(desc); + u8 pending; + int cirq; + + desc->chip->mask(irq); + desc->chip->ack(irq); + pending = readb(S6_REG_GPIO + S6_GPIO_BANK(0) + S6_GPIO_MIS) & *mask; + cirq = IRQ_BASE - 1; + while (pending) { + int n = ffs(pending); + cirq += n; + pending >>= n; + generic_handle_irq(cirq); + } + desc->chip->unmask(irq); +} + +extern const signed char *platform_irq_mappings[XTENSA_NR_IRQS]; + +void __init variant_init_irq(void) +{ + int irq, n; + writeb(0, S6_REG_GPIO + S6_GPIO_BANK(0) + S6_GPIO_IE); + for (irq = n = 0; irq < XTENSA_NR_IRQS; irq++) { + const signed char *mapping = platform_irq_mappings[irq]; + int alone = 1; + u8 mask; + if (!mapping) + continue; + for(mask = 0; *mapping != -1; mapping++) + switch (*mapping) { + case S6_INTC_GPIO(0): + mask |= 1 << 0; + break; + case S6_INTC_GPIO(1): + mask |= 1 << 1; + break; + case S6_INTC_GPIO(2): + mask |= 1 << 2; + break; + case S6_INTC_GPIO(3): + mask |= 0x1f << 3; + break; + default: + alone = 0; + } + if (mask) { + int cirq, i; + if (!alone) { + printk(KERN_ERR "chained irq chips can't share" + " parent irq %i\n", irq); + continue; + } + demux_masks[n] = mask; + cirq = IRQ_BASE - 1; + do { + i = ffs(mask); + cirq += i; + mask >>= i; + set_irq_chip(cirq, &gpioirqs); + set_irq_type(irq, IRQ_TYPE_LEVEL_LOW); + } while (mask); + set_irq_data(irq, demux_masks + n); + set_irq_chained_handler(irq, demux_irqs); + if (++n == ARRAY_SIZE(demux_masks)) + break; + } + } +} diff --git a/arch/xtensa/variants/s6000/include/variant/gpio.h b/arch/xtensa/variants/s6000/include/variant/gpio.h index 8327f62..8484ab0 100644 --- a/arch/xtensa/variants/s6000/include/variant/gpio.h +++ b/arch/xtensa/variants/s6000/include/variant/gpio.h @@ -1,6 +1,6 @@ #ifndef _XTENSA_VARIANT_S6000_GPIO_H #define _XTENSA_VARIANT_S6000_GPIO_H -extern int s6_gpio_init(void); +extern int s6_gpio_init(u32 afsel); #endif /* _XTENSA_VARIANT_S6000_GPIO_H */ diff --git a/arch/xtensa/variants/s6000/include/variant/irq.h b/arch/xtensa/variants/s6000/include/variant/irq.h index fa031cb..97d6fc4 100644 --- a/arch/xtensa/variants/s6000/include/variant/irq.h +++ b/arch/xtensa/variants/s6000/include/variant/irq.h @@ -1,9 +1,9 @@ -#ifndef __XTENSA_S6000_IRQ_H -#define __XTENSA_S6000_IRQ_H +#ifndef _XTENSA_S6000_IRQ_H +#define _XTENSA_S6000_IRQ_H #define NO_IRQ (-1) +#define VARIANT_NR_IRQS 8 /* GPIO interrupts */ extern void variant_irq_enable(unsigned int irq); -extern void variant_irq_disable(unsigned int irq); #endif /* __XTENSA_S6000_IRQ_H */ -- cgit v1.1 From 059cafe6df5d3b078c4b1be42623c62ab32de6fd Mon Sep 17 00:00:00 2001 From: Oskar Schirmer <os@emlix.com> Date: Wed, 10 Jun 2009 12:58:48 -0700 Subject: xtensa: s6105 specific configuration for s6gmac Platform-specific configuration for the s6gmac driver, including the PHY interrupt line. Signed-off-by: Daniel Glockner <dg@emlix.com> Signed-off-by: Oskar Schirmer <os@emlix.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Johannes Weiner <jw@emlix.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> --- arch/xtensa/platforms/s6105/device.c | 91 ++++++++++++++++++++++++++++++++++++ arch/xtensa/platforms/s6105/setup.c | 9 ++++ 2 files changed, 100 insertions(+) (limited to 'arch') diff --git a/arch/xtensa/platforms/s6105/device.c b/arch/xtensa/platforms/s6105/device.c index 78b08be..963634a 100644 --- a/arch/xtensa/platforms/s6105/device.c +++ b/arch/xtensa/platforms/s6105/device.c @@ -5,14 +5,27 @@ */ #include <linux/kernel.h> +#include <linux/gpio.h> #include <linux/init.h> +#include <linux/irq.h> +#include <linux/phy.h> #include <linux/platform_device.h> #include <linux/serial.h> #include <linux/serial_8250.h> #include <variant/hardware.h> +#include <variant/dmac.h> +#include <platform/gpio.h> + +#define GPIO3_INTNUM 3 #define UART_INTNUM 4 +#define GMAC_INTNUM 5 + +static const signed char gpio3_irq_mappings[] = { + S6_INTC_GPIO(3), + -1 +}; static const signed char uart_irq_mappings[] = { S6_INTC_UART(0), @@ -20,8 +33,18 @@ static const signed char uart_irq_mappings[] = { -1, }; +static const signed char gmac_irq_mappings[] = { + S6_INTC_GMAC_STAT, + S6_INTC_GMAC_ERR, + S6_INTC_DMA_HOSTTERMCNT(0), + S6_INTC_DMA_HOSTTERMCNT(1), + -1 +}; + const signed char *platform_irq_mappings[NR_IRQS] = { + [GPIO3_INTNUM] = gpio3_irq_mappings, [UART_INTNUM] = uart_irq_mappings, + [GMAC_INTNUM] = gmac_irq_mappings, }; static struct plat_serial8250_port serial_platform_data[] = { @@ -46,6 +69,66 @@ static struct plat_serial8250_port serial_platform_data[] = { { }, }; +static struct resource s6_gmac_resource[] = { + { + .name = "mem", + .start = (resource_size_t)S6_REG_GMAC, + .end = (resource_size_t)S6_REG_GMAC + 0x10000 - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "dma", + .start = (resource_size_t) + DMA_CHNL(S6_REG_HIFDMA, S6_HIFDMA_GMACTX), + .end = (resource_size_t) + DMA_CHNL(S6_REG_HIFDMA, S6_HIFDMA_GMACTX) + 0x100 - 1, + .flags = IORESOURCE_DMA, + }, + { + .name = "dma", + .start = (resource_size_t) + DMA_CHNL(S6_REG_HIFDMA, S6_HIFDMA_GMACRX), + .end = (resource_size_t) + DMA_CHNL(S6_REG_HIFDMA, S6_HIFDMA_GMACRX) + 0x100 - 1, + .flags = IORESOURCE_DMA, + }, + { + .name = "io", + .start = (resource_size_t)S6_MEM_GMAC, + .end = (resource_size_t)S6_MEM_GMAC + 0x2000000 - 1, + .flags = IORESOURCE_IO, + }, + { + .name = "irq", + .start = (resource_size_t)GMAC_INTNUM, + .flags = IORESOURCE_IRQ, + }, + { + .name = "irq", + .start = (resource_size_t)PHY_POLL, + .flags = IORESOURCE_IRQ, + }, +}; + +static int __init prepare_phy_irq(int pin) +{ + int irq; + if (gpio_request(pin, "s6gmac_phy") < 0) + goto fail; + if (gpio_direction_input(pin) < 0) + goto free; + irq = gpio_to_irq(pin); + if (irq < 0) + goto free; + if (set_irq_type(irq, IRQ_TYPE_LEVEL_LOW) < 0) + goto free; + return irq; +free: + gpio_free(pin); +fail: + return PHY_POLL; +} + static struct platform_device platform_devices[] = { { .name = "serial8250", @@ -54,12 +137,20 @@ static struct platform_device platform_devices[] = { .platform_data = serial_platform_data, }, }, + { + .name = "s6gmac", + .id = 0, + .resource = s6_gmac_resource, + .num_resources = ARRAY_SIZE(s6_gmac_resource), + }, }; static int __init device_init(void) { int i; + s6_gmac_resource[5].start = prepare_phy_irq(GPIO_PHY_IRQ); + for (i = 0; i < ARRAY_SIZE(platform_devices); i++) platform_device_register(&platform_devices[i]); return 0; diff --git a/arch/xtensa/platforms/s6105/setup.c b/arch/xtensa/platforms/s6105/setup.c index 95fa23c..86ce730 100644 --- a/arch/xtensa/platforms/s6105/setup.c +++ b/arch/xtensa/platforms/s6105/setup.c @@ -35,12 +35,21 @@ void __init platform_setup(char **cmdline) { unsigned long reg; + reg = readl(S6_REG_GREG1 + S6_GREG1_PLLSEL); + reg &= ~(S6_GREG1_PLLSEL_GMAC_MASK << S6_GREG1_PLLSEL_GMAC | + S6_GREG1_PLLSEL_GMII_MASK << S6_GREG1_PLLSEL_GMII); + reg |= S6_GREG1_PLLSEL_GMAC_125MHZ << S6_GREG1_PLLSEL_GMAC | + S6_GREG1_PLLSEL_GMII_125MHZ << S6_GREG1_PLLSEL_GMII; + writel(reg, S6_REG_GREG1 + S6_GREG1_PLLSEL); + reg = readl(S6_REG_GREG1 + S6_GREG1_CLKGATE); reg &= ~(1 << S6_GREG1_BLOCK_SB); + reg &= ~(1 << S6_GREG1_BLOCK_GMAC); writel(reg, S6_REG_GREG1 + S6_GREG1_CLKGATE); reg = readl(S6_REG_GREG1 + S6_GREG1_BLOCKENA); reg |= 1 << S6_GREG1_BLOCK_SB; + reg |= 1 << S6_GREG1_BLOCK_GMAC; writel(reg, S6_REG_GREG1 + S6_GREG1_BLOCKENA); printk(KERN_NOTICE "S6105 on Stretch S6000 - " -- cgit v1.1 From 607c2add0f3b2cc12567f658e9dfdb07df2b106e Mon Sep 17 00:00:00 2001 From: Daniel Glockner <dg@emlix.com> Date: Wed, 10 Jun 2009 12:58:49 -0700 Subject: xtensa: enable s6gmac in s6105_defconfig Signed-off-by: Daniel Glockner <dg@emlix.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Johannes Weiner <jw@emlix.com> Cc: Oskar Schirmer <os@emlix.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> --- arch/xtensa/configs/s6105_defconfig | 49 ++++++++++++++++++++++++++++++++++++- 1 file changed, 48 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/xtensa/configs/s6105_defconfig b/arch/xtensa/configs/s6105_defconfig index 768bee0..a1eca01 100644 --- a/arch/xtensa/configs/s6105_defconfig +++ b/arch/xtensa/configs/s6105_defconfig @@ -263,7 +263,54 @@ CONFIG_HAVE_IDE=y # CONFIG_SCSI_NETLINK is not set # CONFIG_ATA is not set # CONFIG_MD is not set -# CONFIG_NETDEVICES is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +CONFIG_SMSC_PHY=y +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +# CONFIG_NET_ETHERNET is not set +CONFIG_NETDEV_1000=y +CONFIG_S6GMAC=y +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set -- cgit v1.1 From 759c67e87bce54bd08e5fee1fdca975cebe5d3c2 Mon Sep 17 00:00:00 2001 From: Daniel Glockner <dg@emlix.com> Date: Wed, 10 Jun 2009 12:58:50 -0700 Subject: xtensa: add m41t62 rtc to s6105 platform Signed-off-by: Daniel Glockner <dg@emlix.com> Cc: David Brownell <david-b@pacbell.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> --- arch/xtensa/platforms/s6105/device.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/xtensa/platforms/s6105/device.c b/arch/xtensa/platforms/s6105/device.c index 963634a..65333ff 100644 --- a/arch/xtensa/platforms/s6105/device.c +++ b/arch/xtensa/platforms/s6105/device.c @@ -143,6 +143,9 @@ static struct platform_device platform_devices[] = { .resource = s6_gmac_resource, .num_resources = ARRAY_SIZE(s6_gmac_resource), }, + { + I2C_BOARD_INFO("m41t62", S6I2C_ADDR_M41T62), + }, }; static int __init device_init(void) -- cgit v1.1 From aafd1255d08fb26cab87d1b28ff35a15bdb2ed68 Mon Sep 17 00:00:00 2001 From: Daniel Glockner <dg@emlix.com> Date: Wed, 10 Jun 2009 12:58:51 -0700 Subject: xtensa: enable m41t80 driver in s6105_defconfig Signed-off-by: Daniel Glockner <dg@emlix.com> Cc: David Brownell <david-b@pacbell.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> --- arch/xtensa/configs/s6105_defconfig | 56 +++++++++++++++++++++++++++++++++++-- 1 file changed, 53 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/xtensa/configs/s6105_defconfig b/arch/xtensa/configs/s6105_defconfig index a1eca01..bb84fbc 100644 --- a/arch/xtensa/configs/s6105_defconfig +++ b/arch/xtensa/configs/s6105_defconfig @@ -351,8 +351,6 @@ CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set -# CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set @@ -434,7 +432,59 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set -# CONFIG_RTC_CLASS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +# CONFIG_RTC_INTF_SYSFS is not set +# CONFIG_RTC_INTF_PROC is not set +# CONFIG_RTC_INTF_DEV is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +CONFIG_RTC_DRV_M41T80=y +# CONFIG_RTC_DRV_M41T80_WDT is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -- cgit v1.1 From d7d1104fa40f66dbe50840f05b34268144f8a17a Mon Sep 17 00:00:00 2001 From: Heiko Carstens <heiko.carstens@de.ibm.com> Date: Mon, 22 Jun 2009 12:08:03 +0200 Subject: [S390] time: convert from bootmem to slab The slab allocator is earlier available so convert the bootmem allocations to slab/gfp allocations. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> --- arch/s390/kernel/time.c | 16 ++++------------ arch/s390/kernel/vtime.c | 5 +---- 2 files changed, 5 insertions(+), 16 deletions(-) (limited to 'arch') diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c index 215330a..d4c8e9c 100644 --- a/arch/s390/kernel/time.c +++ b/arch/s390/kernel/time.c @@ -36,7 +36,6 @@ #include <linux/notifier.h> #include <linux/clocksource.h> #include <linux/clockchips.h> -#include <linux/bootmem.h> #include <asm/uaccess.h> #include <asm/delay.h> #include <asm/s390_ext.h> @@ -62,9 +61,6 @@ u64 sched_clock_base_cc = -1; /* Force to data section. */ -static ext_int_info_t ext_int_info_cc; -static ext_int_info_t ext_int_etr_cc; - static DEFINE_PER_CPU(struct clock_event_device, comparators); /* @@ -255,15 +251,11 @@ void __init time_init(void) stp_reset(); /* request the clock comparator external interrupt */ - if (register_early_external_interrupt(0x1004, - clock_comparator_interrupt, - &ext_int_info_cc) != 0) + if (register_external_interrupt(0x1004, clock_comparator_interrupt)) panic("Couldn't request external interrupt 0x1004"); /* request the timing alert external interrupt */ - if (register_early_external_interrupt(0x1406, - timing_alert_interrupt, - &ext_int_etr_cc) != 0) + if (register_external_interrupt(0x1406, timing_alert_interrupt)) panic("Couldn't request external interrupt 0x1406"); if (clocksource_register(&clocksource_tod) != 0) @@ -1445,14 +1437,14 @@ static void __init stp_reset(void) { int rc; - stp_page = alloc_bootmem_pages(PAGE_SIZE); + stp_page = (void *) get_zeroed_page(GFP_ATOMIC); rc = chsc_sstpc(stp_page, STP_OP_CTRL, 0x0000); if (rc == 0) set_bit(CLOCK_SYNC_HAS_STP, &clock_sync_flags); else if (stp_online) { pr_warning("The real or virtual hardware system does " "not provide an STP interface\n"); - free_bootmem((unsigned long) stp_page, PAGE_SIZE); + free_page((unsigned long) stp_page); stp_page = NULL; stp_online = 0; } diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c index c8eb725..ade17e7 100644 --- a/arch/s390/kernel/vtime.c +++ b/arch/s390/kernel/vtime.c @@ -25,8 +25,6 @@ #include <asm/irq_regs.h> #include <asm/cputime.h> -static ext_int_info_t ext_int_info_timer; - static DEFINE_PER_CPU(struct vtimer_queue, virt_cpu_timer); DEFINE_PER_CPU(struct s390_idle_data, s390_idle) = { @@ -557,8 +555,7 @@ void init_cpu_vtimer(void) void __init vtime_init(void) { /* request the cpu timer external interrupt */ - if (register_early_external_interrupt(0x1005, do_cpu_timer_interrupt, - &ext_int_info_timer) != 0) + if (register_external_interrupt(0x1005, do_cpu_timer_interrupt)) panic("Couldn't request external interrupt 0x1005"); /* Enable cpu timer interrupts on the boot cpu. */ -- cgit v1.1 From 66d51f3e81b1067bdc836b3aba609eec957c693c Mon Sep 17 00:00:00 2001 From: Pekka Enberg <penberg@cs.helsinki.fi> Date: Mon, 22 Jun 2009 12:08:08 +0200 Subject: [S390] s390: remove DEBUG_MALLOC The kernel now has kmemleak and kmemtrace so there's no reason to keep this ugly s390 hack around. I am not sure how it's supposed to work on SMP anyway as it uses a global variable to temporarily store the return value of all kmalloc() calls: void *b; #define kmalloc(x...) (PRINT_INFO(" kmalloc %p\n",b=kmalloc(x)),b) Cc: <linux-s390@vger.kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> --- arch/s390/include/asm/debug.h | 9 --------- 1 file changed, 9 deletions(-) (limited to 'arch') diff --git a/arch/s390/include/asm/debug.h b/arch/s390/include/asm/debug.h index 9450ce6..31ed568 100644 --- a/arch/s390/include/asm/debug.h +++ b/arch/s390/include/asm/debug.h @@ -248,14 +248,5 @@ int debug_unregister_view(debug_info_t* id, struct debug_view* view); #define PRINT_FATAL(x...) printk ( KERN_DEBUG PRINTK_HEADER x ) #endif /* DASD_DEBUG */ -#undef DEBUG_MALLOC -#ifdef DEBUG_MALLOC -void *b; -#define kmalloc(x...) (PRINT_INFO(" kmalloc %p\n",b=kmalloc(x)),b) -#define kfree(x) PRINT_INFO(" kfree %p\n",x);kfree(x) -#define get_zeroed_page(x...) (PRINT_INFO(" gfp %p\n",b=get_zeroed_page(x)),b) -#define __get_free_pages(x...) (PRINT_INFO(" gfps %p\n",b=__get_free_pages(x)),b) -#endif /* DEBUG_MALLOC */ - #endif /* __KERNEL__ */ #endif /* DEBUG_H */ -- cgit v1.1 From 6618241b47cd131503610d8df68dd6f4948e5c1a Mon Sep 17 00:00:00 2001 From: Jan Glauber <jang@linux.vnet.ibm.com> Date: Mon, 22 Jun 2009 12:08:15 +0200 Subject: [S390] qdio: Sanitize do_QDIO sanity checks Remove unneeded sanity checks from do_QDIO since this is the hot path. Change the type of bufnr and count to unsigned int so the check for the maximum value works. Reported-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> --- arch/s390/include/asm/qdio.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/s390/include/asm/qdio.h b/arch/s390/include/asm/qdio.h index 402d6dc..79d849f 100644 --- a/arch/s390/include/asm/qdio.h +++ b/arch/s390/include/asm/qdio.h @@ -380,7 +380,7 @@ extern int qdio_establish(struct qdio_initialize *); extern int qdio_activate(struct ccw_device *); extern int do_QDIO(struct ccw_device *cdev, unsigned int callflags, - int q_nr, int bufnr, int count); + int q_nr, unsigned int bufnr, unsigned int count); extern int qdio_cleanup(struct ccw_device*, int); extern int qdio_shutdown(struct ccw_device*, int); extern int qdio_free(struct ccw_device *); -- cgit v1.1 From 4a9c75255e1fef4247cf960d3c3eb528c8cd8409 Mon Sep 17 00:00:00 2001 From: Heiko Carstens <heiko.carstens@de.ibm.com> Date: Mon, 22 Jun 2009 12:08:18 +0200 Subject: [S390] pm: fix build error for !SMP Fix build error for !SMP: arch/s390/power/built-in.o: In function `swsusp_arch_resume': (.text+0x1b4): undefined reference to `smp_get_phys_cpu_id' arch/s390/power/built-in.o: In function `swsusp_arch_resume': (.text+0x288): undefined reference to `smp_switch_boot_cpu_in_resume' make: *** [.tmp_vmlinux1] Error 1 Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> --- arch/s390/power/swsusp_asm64.S | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/s390/power/swsusp_asm64.S b/arch/s390/power/swsusp_asm64.S index 3c74e7d..76d688d 100644 --- a/arch/s390/power/swsusp_asm64.S +++ b/arch/s390/power/swsusp_asm64.S @@ -109,10 +109,11 @@ swsusp_arch_resume: aghi %r15,-STACK_FRAME_OVERHEAD stg %r1,__SF_BACKCHAIN(%r15) +#ifdef CONFIG_SMP /* Save boot cpu number */ brasl %r14,smp_get_phys_cpu_id lgr %r10,%r2 - +#endif /* Deactivate DAT */ stnsm __SF_EMPTY(%r15),0xfb @@ -177,11 +178,12 @@ swsusp_arch_resume: /* Pointer to save arae */ lghi %r13,0x1000 +#ifdef CONFIG_SMP /* Switch CPUs */ lgr %r2,%r10 /* get cpu id */ llgf %r3,0x318(%r13) brasl %r14,smp_switch_boot_cpu_in_resume - +#endif /* Restore prefix register */ spx 0x318(%r13) -- cgit v1.1 From e98bbaafcd1c47d30f3245517fb585f1aaaca4db Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky <schwidefsky@de.ibm.com> Date: Mon, 22 Jun 2009 12:08:20 +0200 Subject: [S390] lockless idle time accounting Replace the spinlock used in the idle time accounting with a sequence counter mechanism analog to seqlock. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> --- arch/s390/include/asm/cputime.h | 2 +- arch/s390/kernel/smp.c | 28 +++++++++++++++++++--------- arch/s390/kernel/vtime.c | 22 +++++++++++++++------- 3 files changed, 35 insertions(+), 17 deletions(-) (limited to 'arch') diff --git a/arch/s390/include/asm/cputime.h b/arch/s390/include/asm/cputime.h index ec917d4..7a3817a 100644 --- a/arch/s390/include/asm/cputime.h +++ b/arch/s390/include/asm/cputime.h @@ -178,7 +178,7 @@ cputime64_to_clock_t(cputime64_t cputime) } struct s390_idle_data { - spinlock_t lock; + unsigned int sequence; unsigned long long idle_count; unsigned long long idle_enter; unsigned long long idle_time; diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index fd8e311..2270730 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -856,13 +856,20 @@ static ssize_t show_idle_count(struct sys_device *dev, { struct s390_idle_data *idle; unsigned long long idle_count; + unsigned int sequence; idle = &per_cpu(s390_idle, dev->id); - spin_lock(&idle->lock); +repeat: + sequence = idle->sequence; + smp_rmb(); + if (sequence & 1) + goto repeat; idle_count = idle->idle_count; if (idle->idle_enter) idle_count++; - spin_unlock(&idle->lock); + smp_rmb(); + if (idle->sequence != sequence) + goto repeat; return sprintf(buf, "%llu\n", idle_count); } static SYSDEV_ATTR(idle_count, 0444, show_idle_count, NULL); @@ -872,15 +879,22 @@ static ssize_t show_idle_time(struct sys_device *dev, { struct s390_idle_data *idle; unsigned long long now, idle_time, idle_enter; + unsigned int sequence; idle = &per_cpu(s390_idle, dev->id); - spin_lock(&idle->lock); now = get_clock(); +repeat: + sequence = idle->sequence; + smp_rmb(); + if (sequence & 1) + goto repeat; idle_time = idle->idle_time; idle_enter = idle->idle_enter; if (idle_enter != 0ULL && idle_enter < now) idle_time += now - idle_enter; - spin_unlock(&idle->lock); + smp_rmb(); + if (idle->sequence != sequence) + goto repeat; return sprintf(buf, "%llu\n", idle_time >> 12); } static SYSDEV_ATTR(idle_time_us, 0444, show_idle_time, NULL); @@ -908,11 +922,7 @@ static int __cpuinit smp_cpu_notify(struct notifier_block *self, case CPU_ONLINE: case CPU_ONLINE_FROZEN: idle = &per_cpu(s390_idle, cpu); - spin_lock_irq(&idle->lock); - idle->idle_enter = 0; - idle->idle_time = 0; - idle->idle_count = 0; - spin_unlock_irq(&idle->lock); + memset(idle, 0, sizeof(struct s390_idle_data)); if (sysfs_create_group(&s->kobj, &cpu_online_attr_group)) return NOTIFY_BAD; break; diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c index ade17e7..c41bb0d 100644 --- a/arch/s390/kernel/vtime.c +++ b/arch/s390/kernel/vtime.c @@ -27,9 +27,7 @@ static DEFINE_PER_CPU(struct vtimer_queue, virt_cpu_timer); -DEFINE_PER_CPU(struct s390_idle_data, s390_idle) = { - .lock = __SPIN_LOCK_UNLOCKED(s390_idle.lock) -}; +DEFINE_PER_CPU(struct s390_idle_data, s390_idle); static inline __u64 get_vtimer(void) { @@ -151,11 +149,13 @@ void vtime_start_cpu(void) vq->elapsed -= vq->idle - S390_lowcore.async_enter_timer; } - spin_lock(&idle->lock); + idle->sequence++; + smp_wmb(); idle->idle_time += idle_time; idle->idle_enter = 0ULL; idle->idle_count++; - spin_unlock(&idle->lock); + smp_wmb(); + idle->sequence++; } void vtime_stop_cpu(void) @@ -242,15 +242,23 @@ cputime64_t s390_get_idle_time(int cpu) { struct s390_idle_data *idle; unsigned long long now, idle_time, idle_enter; + unsigned int sequence; idle = &per_cpu(s390_idle, cpu); - spin_lock(&idle->lock); + now = get_clock(); +repeat: + sequence = idle->sequence; + smp_rmb(); + if (sequence & 1) + goto repeat; idle_time = 0; idle_enter = idle->idle_enter; if (idle_enter != 0ULL && idle_enter < now) idle_time = now - idle_enter; - spin_unlock(&idle->lock); + smp_rmb(); + if (idle->sequence != sequence) + goto repeat; return idle_time; } -- cgit v1.1 From 12310e9c1b9a53896e4df0459039dd125f62aa9b Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky <schwidefsky@de.ibm.com> Date: Mon, 22 Jun 2009 12:08:22 +0200 Subject: [S390] Enable tick based perf_counter on s390. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> --- arch/s390/Kconfig | 1 + arch/s390/include/asm/perf_counter.h | 8 ++++++++ 2 files changed, 9 insertions(+) create mode 100644 arch/s390/include/asm/perf_counter.h (limited to 'arch') diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index a14dba0..e577839 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -94,6 +94,7 @@ config S390 select HAVE_KVM if 64BIT select HAVE_ARCH_TRACEHOOK select INIT_ALL_POSSIBLE + select HAVE_PERF_COUNTERS source "init/Kconfig" diff --git a/arch/s390/include/asm/perf_counter.h b/arch/s390/include/asm/perf_counter.h new file mode 100644 index 0000000..a7205a3 --- /dev/null +++ b/arch/s390/include/asm/perf_counter.h @@ -0,0 +1,8 @@ +/* + * Performance counter support - s390 specific definitions. + * + * Copyright 2009 Martin Schwidefsky, IBM Corporation. + */ + +static inline void set_perf_counter_pending(void) {} +static inline void clear_perf_counter_pending(void) {} -- cgit v1.1 From acf018004f76617dbab36ef4b5480d4351f9cdff Mon Sep 17 00:00:00 2001 From: Heiko Carstens <heiko.carstens@de.ibm.com> Date: Mon, 22 Jun 2009 12:08:23 +0200 Subject: [S390] kprobes: defer setting of ctlblk state get_krobe_ctlblk returns a per cpu kprobe control block which holds the state of the current cpu wrt to kprobe. When inserting/removing a kprobe the state of the cpu which replaces the code is changed to KPROBE_SWAP_INST. This however is done when preemption is still enabled. So the state of the current cpu doesn't necessarily reflect the real state. To fix this move the code that changes the state to non-preemptible context. Reported-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> --- arch/s390/kernel/kprobes.c | 18 +++++++----------- 1 file changed, 7 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/s390/kernel/kprobes.c b/arch/s390/kernel/kprobes.c index 9bb2f62..86783ef 100644 --- a/arch/s390/kernel/kprobes.c +++ b/arch/s390/kernel/kprobes.c @@ -154,39 +154,35 @@ void __kprobes get_instruction_type(struct arch_specific_insn *ainsn) static int __kprobes swap_instruction(void *aref) { + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + unsigned long status = kcb->kprobe_status; struct ins_replace_args *args = aref; + int rc; - return probe_kernel_write(args->ptr, &args->new, sizeof(args->new)); + kcb->kprobe_status = KPROBE_SWAP_INST; + rc = probe_kernel_write(args->ptr, &args->new, sizeof(args->new)); + kcb->kprobe_status = status; + return rc; } void __kprobes arch_arm_kprobe(struct kprobe *p) { - struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); - unsigned long status = kcb->kprobe_status; struct ins_replace_args args; args.ptr = p->addr; args.old = p->opcode; args.new = BREAKPOINT_INSTRUCTION; - - kcb->kprobe_status = KPROBE_SWAP_INST; stop_machine(swap_instruction, &args, NULL); - kcb->kprobe_status = status; } void __kprobes arch_disarm_kprobe(struct kprobe *p) { - struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); - unsigned long status = kcb->kprobe_status; struct ins_replace_args args; args.ptr = p->addr; args.old = BREAKPOINT_INSTRUCTION; args.new = p->opcode; - - kcb->kprobe_status = KPROBE_SWAP_INST; stop_machine(swap_instruction, &args, NULL); - kcb->kprobe_status = status; } void __kprobes arch_remove_kprobe(struct kprobe *p) -- cgit v1.1 From da6330fccc251db73945ee3eb6248985cf2574de Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky <schwidefsky@de.ibm.com> Date: Mon, 22 Jun 2009 12:08:24 +0200 Subject: [S390] Update default configuration. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> --- arch/s390/defconfig | 72 +++++++++++++++++++++++++++++++++++++++-------------- 1 file changed, 54 insertions(+), 18 deletions(-) (limited to 'arch') diff --git a/arch/s390/defconfig b/arch/s390/defconfig index d401d56..fcba206 100644 --- a/arch/s390/defconfig +++ b/arch/s390/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Thu Apr 23 09:29:52 2009 +# Linux kernel version: 2.6.30 +# Mon Jun 22 11:08:16 2009 # CONFIG_SCHED_MC=y CONFIG_MMU=y @@ -25,6 +25,7 @@ CONFIG_VIRT_CPU_ACCOUNTING=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_S390=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -90,7 +91,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -103,7 +103,14 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_COMPAT_BRK is not set CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -119,6 +126,11 @@ CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_HAVE_DEFAULT_NO_SPIN_MUTEXES=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -150,7 +162,7 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" CONFIG_PREEMPT_NOTIFIERS=y -# CONFIG_FREEZER is not set +CONFIG_FREEZER=y # # Base setup @@ -199,6 +211,7 @@ CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_SELECT_MEMORY_MODEL=y # CONFIG_FLATMEM_MANUAL is not set # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -218,9 +231,9 @@ CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # # I/O subsystem configuration @@ -257,6 +270,16 @@ CONFIG_KEXEC=y # CONFIG_ZFCPDUMP is not set CONFIG_S390_GUEST=y CONFIG_SECCOMP=y + +# +# Power Management +# +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP_SMP=y +CONFIG_PM_SLEEP=y +CONFIG_HIBERNATION=y +CONFIG_PM_STD_PARTITION="" CONFIG_NET=y # @@ -384,6 +407,7 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set CONFIG_NET_SCHED=y # @@ -446,6 +470,7 @@ CONFIG_CAN_BCM=m # CAN Device Drivers # CONFIG_CAN_VCAN=m +# CONFIG_CAN_DEV is not set # CONFIG_CAN_DEBUG_DEVICES is not set # CONFIG_AF_RXRPC is not set # CONFIG_WIMAX is not set @@ -524,10 +549,6 @@ CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y @@ -578,7 +599,6 @@ CONFIG_DM_MULTIPATH=m # CONFIG_DM_DELAY is not set # CONFIG_DM_UEVENT is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_IFB is not set CONFIG_DUMMY=m CONFIG_BONDING=m @@ -595,6 +615,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_KS8842 is not set CONFIG_NETDEV_1000=y CONFIG_NETDEV_10000=y # CONFIG_TR is not set @@ -674,6 +695,11 @@ CONFIG_S390_TAPE_34XX=m # CONFIG_MONREADER is not set CONFIG_MONWRITER=m CONFIG_S390_VMUR=m + +# +# PPS support +# +# CONFIG_PPS is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set @@ -683,6 +709,10 @@ CONFIG_S390_VMUR=m # CONFIG_NEW_LEDS is not set CONFIG_ACCESSIBILITY=y # CONFIG_AUXDISPLAY is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -703,11 +733,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -865,19 +896,23 @@ CONFIG_DEBUG_MEMORY_INIT=y CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_FTRACE_SYSCALLS=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set +# CONFIG_FTRACE_SYSCALLS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -886,6 +921,7 @@ CONFIG_TRACING_SUPPORT=y CONFIG_SAMPLES=y # CONFIG_SAMPLE_KOBJECT is not set # CONFIG_SAMPLE_KPROBES is not set +# CONFIG_KMEMCHECK is not set # # Security options -- cgit v1.1 From 6ade7fa7bb4484b4dc78e55700d0f62bacd491e9 Mon Sep 17 00:00:00 2001 From: Peter Korsgaard <jacmet@sunsite.dk> Date: Thu, 18 Jun 2009 23:54:43 +0200 Subject: [ARM] S3C64XX: fix HCLK gate defines A few typos seems to have sneaked into the HCLK gate defines, causing the usb host clock to not get enabled. Fix them according to the reference manual and throw in the 3d accel bit for good measure. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Ben Dooks <ben-linux@fluff.org> --- arch/arm/plat-s3c64xx/include/plat/regs-clock.h | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-clock.h b/arch/arm/plat-s3c64xx/include/plat/regs-clock.h index 52836d4..a8777a75 100644 --- a/arch/arm/plat-s3c64xx/include/plat/regs-clock.h +++ b/arch/arm/plat-s3c64xx/include/plat/regs-clock.h @@ -88,11 +88,11 @@ #define S3C6400_CLKDIV2_SPI0_SHIFT (0) /* HCLK GATE Registers */ -#define S3C_CLKCON_HCLK_BUS (1<<30) -#define S3C_CLKCON_HCLK_SECUR (1<<29) -#define S3C_CLKCON_HCLK_SDMA1 (1<<28) -#define S3C_CLKCON_HCLK_SDMA2 (1<<27) -#define S3C_CLKCON_HCLK_UHOST (1<<26) +#define S3C_CLKCON_HCLK_3DSE (1<<31) +#define S3C_CLKCON_HCLK_UHOST (1<<29) +#define S3C_CLKCON_HCLK_SECUR (1<<28) +#define S3C_CLKCON_HCLK_SDMA1 (1<<27) +#define S3C_CLKCON_HCLK_SDMA0 (1<<26) #define S3C_CLKCON_HCLK_IROM (1<<25) #define S3C_CLKCON_HCLK_DDR1 (1<<24) #define S3C_CLKCON_HCLK_DDR0 (1<<23) -- cgit v1.1 From 386f43517f8bf026320fd4b9e077140681d7e595 Mon Sep 17 00:00:00 2001 From: Peter Korsgaard <jacmet@sunsite.dk> Date: Thu, 18 Jun 2009 23:54:44 +0200 Subject: [ARM] S3C64XX: clock.c: fix typo in usb-host clock ctrlbit The usb-host clock was using the wrong define (the SCLK enable for the usb-host-bus) to change the HCLK register instead of the HCLK_UHOST bit. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Ben Dooks <ben-linux@fluff.org> --- arch/arm/plat-s3c64xx/clock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-s3c64xx/clock.c b/arch/arm/plat-s3c64xx/clock.c index 0bc2fa1..7a36e89 100644 --- a/arch/arm/plat-s3c64xx/clock.c +++ b/arch/arm/plat-s3c64xx/clock.c @@ -191,7 +191,7 @@ static struct clk init_clocks[] = { .id = -1, .parent = &clk_h, .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_SCLK_UHOST, + .ctrlbit = S3C_CLKCON_HCLK_UHOST, }, { .name = "hsmmc", .id = 0, -- cgit v1.1 From 0b495737f311cb8eb5e66404309ea16e4d7ded8a Mon Sep 17 00:00:00 2001 From: Marek Szyprowski <m.szyprowski@samsung.com> Date: Thu, 18 Jun 2009 13:30:27 +0200 Subject: [ARM] S3C64XX: add to_irq() support for EINT() GPIO N group Add to_irq() function to onvert gpio to irq for external interrupt group (GPN). Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> --- arch/arm/plat-s3c64xx/gpiolib.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/arm/plat-s3c64xx/gpiolib.c b/arch/arm/plat-s3c64xx/gpiolib.c index da7b60e..9285929 100644 --- a/arch/arm/plat-s3c64xx/gpiolib.c +++ b/arch/arm/plat-s3c64xx/gpiolib.c @@ -321,6 +321,11 @@ static struct s3c_gpio_cfg gpio_2bit_cfg_eint11 = { .get_pull = s3c_gpio_getpull_updown, }; +int s3c64xx_gpio2int_gpn(struct gpio_chip *chip, unsigned pin) +{ + return IRQ_EINT(0) + pin; +} + static struct s3c_gpio_chip gpio_2bit[] = { { .base = S3C64XX_GPF_BASE, @@ -353,6 +358,7 @@ static struct s3c_gpio_chip gpio_2bit[] = { .base = S3C64XX_GPN(0), .ngpio = S3C64XX_GPIO_N_NR, .label = "GPN", + .to_irq = s3c64xx_gpio2int_gpn, }, }, { .base = S3C64XX_GPO_BASE, -- cgit v1.1 From 49fb88af23f3344ba53d6dbe34ac0b1426d81006 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski <m.szyprowski@samsung.com> Date: Thu, 18 Jun 2009 13:30:16 +0200 Subject: [ARM] S3C: Fix gpio-config off-by-one bug Fix gpio-config off-by-one bug. Without this patch, touching GPA0 pin on S3C64XX platform causes kernel oops. Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> --- arch/arm/plat-s3c/gpio-config.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-s3c/gpio-config.c b/arch/arm/plat-s3c/gpio-config.c index 08044de..456969b 100644 --- a/arch/arm/plat-s3c/gpio-config.c +++ b/arch/arm/plat-s3c/gpio-config.c @@ -119,7 +119,7 @@ int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip, unsigned int shift = (off & 7) * 4; u32 con; - if (off < 8 && chip->chip.ngpio >= 8) + if (off < 8 && chip->chip.ngpio > 8) reg -= 4; if (s3c_gpio_is_cfg_special(cfg)) { -- cgit v1.1 From 2e8b5a09ebf1f98f02c1988a48415e89d4c25168 Mon Sep 17 00:00:00 2001 From: David Howells <dhowells@redhat.com> Date: Mon, 22 Jun 2009 15:32:36 +0100 Subject: MN10300: Fix the vmlinux ldscript Fix the MN10300 vmlinux ldscript. It needs to use various macros from asm-generic/vmlinux.lds.h to correctly include all that it needs to. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> --- arch/mn10300/kernel/vmlinux.lds.S | 60 +++++++++++---------------------------- 1 file changed, 16 insertions(+), 44 deletions(-) (limited to 'arch') diff --git a/arch/mn10300/kernel/vmlinux.lds.S b/arch/mn10300/kernel/vmlinux.lds.S index 24de6b9..bcebcef 100644 --- a/arch/mn10300/kernel/vmlinux.lds.S +++ b/arch/mn10300/kernel/vmlinux.lds.S @@ -38,14 +38,10 @@ SECTIONS _etext = .; /* End of text section */ - . = ALIGN(16); /* Exception table */ - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - + EXCEPTION_TABLE(16) BUG_TABLE - RODATA + RO_DATA(PAGE_SIZE) /* writeable */ .data : { /* Data */ @@ -53,27 +49,19 @@ SECTIONS CONSTRUCTORS } - . = ALIGN(PAGE_SIZE); - __nosave_begin = .; - .data_nosave : { *(.data.nosave) } - . = ALIGN(PAGE_SIZE); - __nosave_end = .; - - . = ALIGN(PAGE_SIZE); - .data.page_aligned : { *(.data.idt) } + .data_nosave : { NOSAVE_DATA; } - . = ALIGN(32); - .data.cacheline_aligned : { *(.data.cacheline_aligned) } + .data.page_aligned : { PAGE_ALIGNED_DATA(PAGE_SIZE); } + .data.cacheline_aligned : { CACHELINE_ALIGNED_DATA(32); } /* rarely changed data like cpu maps */ . = ALIGN(32); .data.read_mostly : AT(ADDR(.data.read_mostly)) { - *(.data.read_mostly) + READ_MOSTLY_DATA(32); _edata = .; /* End of data section */ } - . = ALIGN(THREAD_SIZE); /* init_task */ - .data.init_task : { *(.data.init_task) } + .data.init_task : { INIT_TASK(THREAD_SIZE); } /* might get freed after init */ . = ALIGN(PAGE_SIZE); @@ -88,23 +76,18 @@ SECTIONS __init_begin = .; .init.text : { _sinittext = .; - *(.init.text) + INIT_TEXT; _einittext = .; } - .init.data : { *(.init.data) } - . = ALIGN(16); - __setup_start = .; - .setup.init : { KEEP(*(.init.setup)) } - __setup_end = .; + .init.data : { INIT_DATA; } + .setup.init : { INIT_SETUP(16); } __initcall_start = .; .initcall.init : { INITCALLS } __initcall_end = .; - __con_initcall_start = .; - .con_initcall.init : { *(.con_initcall.init) } - __con_initcall_end = .; + .con_initcall.init : { CON_INITCALL; } SECURITY_INIT . = ALIGN(4); @@ -114,28 +97,17 @@ SECTIONS .altinstr_replacement : { *(.altinstr_replacement) } /* .exit.text is discard at runtime, not link time, to deal with references from .altinstructions and .eh_frame */ - .exit.text : { *(.exit.text) } - .exit.data : { *(.exit.data) } + .exit.text : { EXIT_TEXT; } + .exit.data : { EXIT_DATA; } -#ifdef CONFIG_BLK_DEV_INITRD - . = ALIGN(PAGE_SIZE); - __initramfs_start = .; - .init.ramfs : { *(.init.ramfs) } - __initramfs_end = .; -#endif + .init.ramfs : { INIT_RAM_FS; } PERCPU(32) . = ALIGN(PAGE_SIZE); __init_end = .; /* freed after init ends here */ - __bss_start = .; /* BSS */ - .bss : { - *(.bss.page_aligned) - *(.bss) - } - . = ALIGN(4); - __bss_stop = .; + BSS(4) _end = . ; @@ -145,7 +117,7 @@ SECTIONS /* Sections to be discarded */ /DISCARD/ : { - *(.exitcall.exit) + EXIT_CALL } STABS_DEBUG -- cgit v1.1 From 9ccdac3662dbf3c75e8f8851a214bdf7d365a4bd Mon Sep 17 00:00:00 2001 From: Russell King <rmk@dyn-67.arm.linux.org.uk> Date: Mon, 22 Jun 2009 22:34:55 +0100 Subject: [ARM] idle: clean up pm_idle calling, obey hlt_counter pm_idle is used by infrastructure (eg, cpuidle) which expects architectures to call it in a certain way. Arrange for ARM to follow x86's lead on this and call pm_idle() with interrupts already disabled. However, we expect pm_idle() to enable interrupts before it returns. Also, OMAP wants to be able to disable hlt-ing, so allow hlt_counter to prevent all calls to pm_idle. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> --- arch/arm/kernel/process.c | 58 ++++++++++++++++++++++++++--------------------- 1 file changed, 32 insertions(+), 26 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 56820cc..39196df 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -114,9 +114,6 @@ void arm_machine_restart(char mode, const char *cmd) /* * Function pointers to optional machine specific functions */ -void (*pm_idle)(void); -EXPORT_SYMBOL(pm_idle); - void (*pm_power_off)(void); EXPORT_SYMBOL(pm_power_off); @@ -130,20 +127,19 @@ EXPORT_SYMBOL_GPL(arm_pm_restart); */ static void default_idle(void) { - if (hlt_counter) - cpu_relax(); - else { - local_irq_disable(); - if (!need_resched()) - arch_idle(); - local_irq_enable(); - } + if (!need_resched()) + arch_idle(); + local_irq_enable(); } +void (*pm_idle)(void) = default_idle; +EXPORT_SYMBOL(pm_idle); + /* - * The idle thread. We try to conserve power, while trying to keep - * overall latency low. The architecture specific idle is passed - * a value to indicate the level of "idleness" of the system. + * The idle thread, has rather strange semantics for calling pm_idle, + * but this is what x86 does and we need to do the same, so that + * things like cpuidle get called in the same way. The only difference + * is that we always respect 'hlt_counter' to prevent low power idle. */ void cpu_idle(void) { @@ -151,21 +147,31 @@ void cpu_idle(void) /* endless idle loop with no priority at all */ while (1) { - void (*idle)(void) = pm_idle; - + tick_nohz_stop_sched_tick(1); + leds_event(led_idle_start); + while (!need_resched()) { #ifdef CONFIG_HOTPLUG_CPU - if (cpu_is_offline(smp_processor_id())) { - leds_event(led_idle_start); - cpu_die(); - } + if (cpu_is_offline(smp_processor_id())) + cpu_die(); #endif - if (!idle) - idle = default_idle; - leds_event(led_idle_start); - tick_nohz_stop_sched_tick(1); - while (!need_resched()) - idle(); + local_irq_disable(); + if (hlt_counter) { + local_irq_enable(); + cpu_relax(); + } else { + stop_critical_timings(); + pm_idle(); + start_critical_timings(); + /* + * This will eventually be removed - pm_idle + * functions should always return with IRQs + * enabled. + */ + WARN_ON(irqs_disabled()); + local_irq_enable(); + } + } leds_event(led_idle_end); tick_nohz_restart_sched_tick(); preempt_enable_no_resched(); -- cgit v1.1 From e56e03b0cfeb997a4be9ad874c193824364942e0 Mon Sep 17 00:00:00 2001 From: Mike Frysinger <vapier@gentoo.org> Date: Sun, 7 Jun 2009 16:31:52 -0400 Subject: Blackfin: unify memory region checks between kgdb and traps The kgdb (in multiple places) and traps code developed pretty much identical checks for how to access different regions of the Blackfin memory map, but each wasn't 100%, so unify them to avoid duplication, bitrot, and bugs with edge cases. Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- arch/blackfin/include/asm/uaccess.h | 22 +++ arch/blackfin/kernel/kgdb.c | 297 ++++++++++++------------------------ arch/blackfin/kernel/process.c | 151 ++++++++++++++---- arch/blackfin/kernel/traps.c | 60 +++----- 4 files changed, 256 insertions(+), 274 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/include/asm/uaccess.h b/arch/blackfin/include/asm/uaccess.h index 8894e9f..2f469a1 100644 --- a/arch/blackfin/include/asm/uaccess.h +++ b/arch/blackfin/include/asm/uaccess.h @@ -265,4 +265,26 @@ __clear_user(void *to, unsigned long n) #define clear_user(to, n) __clear_user(to, n) +/* How to interpret these return values: + * CORE: can be accessed by core load or dma memcpy + * CORE_ONLY: can only be accessed by core load + * DMA: can only be accessed by dma memcpy + * IDMA: can only be accessed by interprocessor dma memcpy (BF561) + * ITEST: can be accessed by isram memcpy or dma memcpy + */ +enum { + BFIN_MEM_ACCESS_CORE = 0, + BFIN_MEM_ACCESS_CORE_ONLY, + BFIN_MEM_ACCESS_DMA, + BFIN_MEM_ACCESS_IDMA, + BFIN_MEM_ACCESS_ITEST, +}; +/** + * bfin_mem_access_type() - what kind of memory access is required + * @addr: the address to check + * @size: number of bytes needed + * @return: <0 is error, >=0 is BFIN_MEM_ACCESS_xxx enum (see above) + */ +int bfin_mem_access_type(unsigned long addr, unsigned long size); + #endif /* _BLACKFIN_UACCESS_H */ diff --git a/arch/blackfin/kernel/kgdb.c b/arch/blackfin/kernel/kgdb.c index da28f79..cce79d0 100644 --- a/arch/blackfin/kernel/kgdb.c +++ b/arch/blackfin/kernel/kgdb.c @@ -34,15 +34,6 @@ int gdb_bfin_vector = -1; #error change the definition of slavecpulocks #endif -#define IN_MEM(addr, size, l1_addr, l1_size) \ -({ \ - unsigned long __addr = (unsigned long)(addr); \ - (l1_size && __addr >= l1_addr && __addr + (size) <= l1_addr + l1_size); \ -}) -#define ASYNC_BANK_SIZE \ - (ASYNC_BANK0_SIZE + ASYNC_BANK1_SIZE + \ - ASYNC_BANK2_SIZE + ASYNC_BANK3_SIZE) - void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs) { gdb_regs[BFIN_R0] = regs->r0; @@ -463,41 +454,88 @@ static int hex(char ch) static int validate_memory_access_address(unsigned long addr, int size) { - int cpu = raw_smp_processor_id(); - - if (size < 0) + if (size < 0 || addr == 0) return -EFAULT; - if (addr >= 0x1000 && (addr + size) <= physical_mem_end) - return 0; - if (addr >= SYSMMR_BASE) - return 0; - if (IN_MEM(addr, size, ASYNC_BANK0_BASE, ASYNC_BANK_SIZE)) - return 0; - if (cpu == 0) { - if (IN_MEM(addr, size, L1_SCRATCH_START, L1_SCRATCH_LENGTH)) - return 0; - if (IN_MEM(addr, size, L1_CODE_START, L1_CODE_LENGTH)) - return 0; - if (IN_MEM(addr, size, L1_DATA_A_START, L1_DATA_A_LENGTH)) - return 0; - if (IN_MEM(addr, size, L1_DATA_B_START, L1_DATA_B_LENGTH)) - return 0; -#ifdef CONFIG_SMP - } else if (cpu == 1) { - if (IN_MEM(addr, size, COREB_L1_SCRATCH_START, L1_SCRATCH_LENGTH)) + return bfin_mem_access_type(addr, size); +} + +static int bfin_probe_kernel_read(char *dst, char *src, int size) +{ + unsigned long lsrc = (unsigned long)src; + int mem_type; + + mem_type = validate_memory_access_address(lsrc, size); + if (mem_type < 0) + return mem_type; + + if (lsrc >= SYSMMR_BASE) { + if (size == 2 && lsrc % 2 == 0) { + u16 mmr = bfin_read16(src); + memcpy(dst, &mmr, sizeof(mmr)); return 0; - if (IN_MEM(addr, size, COREB_L1_CODE_START, L1_CODE_LENGTH)) + } else if (size == 4 && lsrc % 4 == 0) { + u32 mmr = bfin_read32(src); + memcpy(dst, &mmr, sizeof(mmr)); return 0; - if (IN_MEM(addr, size, COREB_L1_DATA_A_START, L1_DATA_A_LENGTH)) + } + } else { + switch (mem_type) { + case BFIN_MEM_ACCESS_CORE: + case BFIN_MEM_ACCESS_CORE_ONLY: + return probe_kernel_read(dst, src, size); + /* XXX: should support IDMA here with SMP */ + case BFIN_MEM_ACCESS_DMA: + if (dma_memcpy(dst, src, size)) + return 0; + break; + case BFIN_MEM_ACCESS_ITEST: + if (isram_memcpy(dst, src, size)) + return 0; + break; + } + } + + return -EFAULT; +} + +static int bfin_probe_kernel_write(char *dst, char *src, int size) +{ + unsigned long ldst = (unsigned long)dst; + int mem_type; + + mem_type = validate_memory_access_address(ldst, size); + if (mem_type < 0) + return mem_type; + + if (ldst >= SYSMMR_BASE) { + if (size == 2 && ldst % 2 == 0) { + u16 mmr; + memcpy(&mmr, src, sizeof(mmr)); + bfin_write16(dst, mmr); return 0; - if (IN_MEM(addr, size, COREB_L1_DATA_B_START, L1_DATA_B_LENGTH)) + } else if (size == 4 && ldst % 4 == 0) { + u32 mmr; + memcpy(&mmr, src, sizeof(mmr)); + bfin_write32(dst, mmr); return 0; -#endif + } + } else { + switch (mem_type) { + case BFIN_MEM_ACCESS_CORE: + case BFIN_MEM_ACCESS_CORE_ONLY: + return probe_kernel_write(dst, src, size); + /* XXX: should support IDMA here with SMP */ + case BFIN_MEM_ACCESS_DMA: + if (dma_memcpy(dst, src, size)) + return 0; + break; + case BFIN_MEM_ACCESS_ITEST: + if (isram_memcpy(dst, src, size)) + return 0; + break; + } } - if (IN_MEM(addr, size, L2_START, L2_LENGTH)) - return 0; - return -EFAULT; } @@ -509,14 +547,6 @@ int kgdb_mem2hex(char *mem, char *buf, int count) { char *tmp; int err; - unsigned char *pch; - unsigned short mmr16; - unsigned long mmr32; - int cpu = raw_smp_processor_id(); - - err = validate_memory_access_address((unsigned long)mem, count); - if (err) - return err; /* * We use the upper half of buf as an intermediate buffer for the @@ -524,44 +554,7 @@ int kgdb_mem2hex(char *mem, char *buf, int count) */ tmp = buf + count; - if ((unsigned int)mem >= SYSMMR_BASE) { /*access MMR registers*/ - switch (count) { - case 2: - if ((unsigned int)mem % 2 == 0) { - mmr16 = *(unsigned short *)mem; - pch = (unsigned char *)&mmr16; - *tmp++ = *pch++; - *tmp++ = *pch++; - tmp -= 2; - } else - err = -EFAULT; - break; - case 4: - if ((unsigned int)mem % 4 == 0) { - mmr32 = *(unsigned long *)mem; - pch = (unsigned char *)&mmr32; - *tmp++ = *pch++; - *tmp++ = *pch++; - *tmp++ = *pch++; - *tmp++ = *pch++; - tmp -= 4; - } else - err = -EFAULT; - break; - default: - err = -EFAULT; - } - } else if ((cpu == 0 && IN_MEM(mem, count, L1_CODE_START, L1_CODE_LENGTH)) -#ifdef CONFIG_SMP - || (cpu == 1 && IN_MEM(mem, count, COREB_L1_CODE_START, L1_CODE_LENGTH)) -#endif - ) { - /* access L1 instruction SRAM*/ - if (dma_memcpy(tmp, mem, count) == NULL) - err = -EFAULT; - } else - err = probe_kernel_read(tmp, mem, count); - + err = bfin_probe_kernel_read(tmp, mem, count); if (!err) { while (count > 0) { buf = pack_hex_byte(buf, *tmp); @@ -582,13 +575,8 @@ int kgdb_mem2hex(char *mem, char *buf, int count) */ int kgdb_ebin2mem(char *buf, char *mem, int count) { - char *tmp_old; - char *tmp_new; - unsigned short *mmr16; - unsigned long *mmr32; - int err; + char *tmp_old, *tmp_new; int size; - int cpu = raw_smp_processor_id(); tmp_old = tmp_new = buf; @@ -601,41 +589,7 @@ int kgdb_ebin2mem(char *buf, char *mem, int count) tmp_old++; } - err = validate_memory_access_address((unsigned long)mem, size); - if (err) - return err; - - if ((unsigned int)mem >= SYSMMR_BASE) { /*access MMR registers*/ - switch (size) { - case 2: - if ((unsigned int)mem % 2 == 0) { - mmr16 = (unsigned short *)buf; - *(unsigned short *)mem = *mmr16; - } else - err = -EFAULT; - break; - case 4: - if ((unsigned int)mem % 4 == 0) { - mmr32 = (unsigned long *)buf; - *(unsigned long *)mem = *mmr32; - } else - err = -EFAULT; - break; - default: - err = -EFAULT; - } - } else if ((cpu == 0 && IN_MEM(mem, count, L1_CODE_START, L1_CODE_LENGTH)) -#ifdef CONFIG_SMP - || (cpu == 1 && IN_MEM(mem, count, COREB_L1_CODE_START, L1_CODE_LENGTH)) -#endif - ) { - /* access L1 instruction SRAM */ - if (dma_memcpy(mem, buf, size) == NULL) - err = -EFAULT; - } else - err = probe_kernel_write(mem, buf, size); - - return err; + return bfin_probe_kernel_write(mem, buf, count); } /* @@ -645,16 +599,7 @@ int kgdb_ebin2mem(char *buf, char *mem, int count) */ int kgdb_hex2mem(char *buf, char *mem, int count) { - char *tmp_raw; - char *tmp_hex; - unsigned short *mmr16; - unsigned long *mmr32; - int err; - int cpu = raw_smp_processor_id(); - - err = validate_memory_access_address((unsigned long)mem, count); - if (err) - return err; + char *tmp_raw, *tmp_hex; /* * We use the upper half of buf as an intermediate buffer for the @@ -669,39 +614,18 @@ int kgdb_hex2mem(char *buf, char *mem, int count) *tmp_raw |= hex(*tmp_hex--) << 4; } - if ((unsigned int)mem >= SYSMMR_BASE) { /*access MMR registers*/ - switch (count) { - case 2: - if ((unsigned int)mem % 2 == 0) { - mmr16 = (unsigned short *)tmp_raw; - *(unsigned short *)mem = *mmr16; - } else - err = -EFAULT; - break; - case 4: - if ((unsigned int)mem % 4 == 0) { - mmr32 = (unsigned long *)tmp_raw; - *(unsigned long *)mem = *mmr32; - } else - err = -EFAULT; - break; - default: - err = -EFAULT; - } - } else if ((cpu == 0 && IN_MEM(mem, count, L1_CODE_START, L1_CODE_LENGTH)) -#ifdef CONFIG_SMP - || (cpu == 1 && IN_MEM(mem, count, COREB_L1_CODE_START, L1_CODE_LENGTH)) -#endif - ) { - /* access L1 instruction SRAM */ - if (dma_memcpy(mem, tmp_raw, count) == NULL) - err = -EFAULT; - } else - err = probe_kernel_write(mem, tmp_raw, count); - - return err; + return bfin_probe_kernel_write(mem, tmp_raw, count); } +#define IN_MEM(addr, size, l1_addr, l1_size) \ +({ \ + unsigned long __addr = (unsigned long)(addr); \ + (l1_size && __addr >= l1_addr && __addr + (size) <= l1_addr + l1_size); \ +}) +#define ASYNC_BANK_SIZE \ + (ASYNC_BANK0_SIZE + ASYNC_BANK1_SIZE + \ + ASYNC_BANK2_SIZE + ASYNC_BANK3_SIZE) + int kgdb_validate_break_address(unsigned long addr) { int cpu = raw_smp_processor_id(); @@ -724,46 +648,17 @@ int kgdb_validate_break_address(unsigned long addr) int kgdb_arch_set_breakpoint(unsigned long addr, char *saved_instr) { - int err; - int cpu = raw_smp_processor_id(); - - if ((cpu == 0 && IN_MEM(addr, BREAK_INSTR_SIZE, L1_CODE_START, L1_CODE_LENGTH)) -#ifdef CONFIG_SMP - || (cpu == 1 && IN_MEM(addr, BREAK_INSTR_SIZE, COREB_L1_CODE_START, L1_CODE_LENGTH)) -#endif - ) { - /* access L1 instruction SRAM */ - if (dma_memcpy(saved_instr, (void *)addr, BREAK_INSTR_SIZE) - == NULL) - return -EFAULT; - - if (dma_memcpy((void *)addr, arch_kgdb_ops.gdb_bpt_instr, - BREAK_INSTR_SIZE) == NULL) - return -EFAULT; - - return 0; - } else { - err = probe_kernel_read(saved_instr, (char *)addr, - BREAK_INSTR_SIZE); - if (err) - return err; - - return probe_kernel_write((char *)addr, - arch_kgdb_ops.gdb_bpt_instr, BREAK_INSTR_SIZE); - } + int err = bfin_probe_kernel_read(saved_instr, (char *)addr, + BREAK_INSTR_SIZE); + if (err) + return err; + return bfin_probe_kernel_write((char *)addr, arch_kgdb_ops.gdb_bpt_instr, + BREAK_INSTR_SIZE); } int kgdb_arch_remove_breakpoint(unsigned long addr, char *bundle) { - if (IN_MEM(addr, BREAK_INSTR_SIZE, L1_CODE_START, L1_CODE_LENGTH)) { - /* access L1 instruction SRAM */ - if (dma_memcpy((void *)addr, bundle, BREAK_INSTR_SIZE) == NULL) - return -EFAULT; - - return 0; - } else - return probe_kernel_write((char *)addr, - (char *)bundle, BREAK_INSTR_SIZE); + return bfin_probe_kernel_write((char *)addr, bundle, BREAK_INSTR_SIZE); } int kgdb_arch_init(void) diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c index 3e1d86e..79cad0a 100644 --- a/arch/blackfin/kernel/process.c +++ b/arch/blackfin/kernel/process.c @@ -344,6 +344,87 @@ void finish_atomic_sections (struct pt_regs *regs) } } +static inline +int in_mem(unsigned long addr, unsigned long size, + unsigned long start, unsigned long end) +{ + return addr >= start && addr + size <= end; +} +static inline +int in_mem_const_off(unsigned long addr, unsigned long size, unsigned long off, + unsigned long const_addr, unsigned long const_size) +{ + return const_size && + in_mem(addr, size, const_addr + off, const_addr + const_size); +} +static inline +int in_mem_const(unsigned long addr, unsigned long size, + unsigned long const_addr, unsigned long const_size) +{ + return in_mem_const_off(addr, 0, size, const_addr, const_size); +} +#define IN_ASYNC(bnum, bctlnum) \ +({ \ + (bfin_read_EBIU_AMGCTL() & 0xe) < ((bnum + 1) << 1) ? -EFAULT : \ + bfin_read_EBIU_AMBCTL##bctlnum() & B##bnum##RDYEN ? -EFAULT : \ + BFIN_MEM_ACCESS_CORE; \ +}) + +int bfin_mem_access_type(unsigned long addr, unsigned long size) +{ + int cpu = raw_smp_processor_id(); + + /* Check that things do not wrap around */ + if (addr > ULONG_MAX - size) + return -EFAULT; + + if (in_mem(addr, size, FIXED_CODE_START, physical_mem_end)) + return BFIN_MEM_ACCESS_CORE; + + if (in_mem_const(addr, size, L1_CODE_START, L1_CODE_LENGTH)) + return cpu == 0 ? BFIN_MEM_ACCESS_ITEST : BFIN_MEM_ACCESS_IDMA; + if (in_mem_const(addr, size, L1_SCRATCH_START, L1_SCRATCH_LENGTH)) + return cpu == 0 ? BFIN_MEM_ACCESS_CORE_ONLY : -EFAULT; + if (in_mem_const(addr, size, L1_DATA_A_START, L1_DATA_A_LENGTH)) + return cpu == 0 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA; + if (in_mem_const(addr, size, L1_DATA_B_START, L1_DATA_B_LENGTH)) + return cpu == 0 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA; +#ifdef COREB_L1_CODE_START + if (in_mem_const(addr, size, COREB_L1_CODE_START, L1_CODE_LENGTH)) + return cpu == 1 ? BFIN_MEM_ACCESS_ITEST : BFIN_MEM_ACCESS_IDMA; + if (in_mem_const(addr, size, COREB_L1_SCRATCH_START, L1_SCRATCH_LENGTH)) + return cpu == 1 ? BFIN_MEM_ACCESS_CORE_ONLY : -EFAULT; + if (in_mem_const(addr, size, COREB_L1_DATA_A_START, L1_DATA_A_LENGTH)) + return cpu == 1 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA; + if (in_mem_const(addr, size, COREB_L1_DATA_B_START, L1_DATA_B_LENGTH)) + return cpu == 1 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA; +#endif + if (in_mem_const(addr, size, L2_START, L2_LENGTH)) + return BFIN_MEM_ACCESS_CORE; + + if (addr >= SYSMMR_BASE) + return BFIN_MEM_ACCESS_CORE_ONLY; + + /* We can't read EBIU banks that aren't enabled or we end up hanging + * on the access to the async space. + */ + if (in_mem_const(addr, size, ASYNC_BANK0_BASE, ASYNC_BANK0_SIZE)) + return IN_ASYNC(0, 0); + if (in_mem_const(addr, size, ASYNC_BANK1_BASE, ASYNC_BANK1_SIZE)) + return IN_ASYNC(1, 0); + if (in_mem_const(addr, size, ASYNC_BANK2_BASE, ASYNC_BANK2_SIZE)) + return IN_ASYNC(2, 1); + if (in_mem_const(addr, size, ASYNC_BANK3_BASE, ASYNC_BANK3_SIZE)) + return IN_ASYNC(3, 1); + + if (in_mem_const(addr, size, BOOT_ROM_START, BOOT_ROM_LENGTH)) + return BFIN_MEM_ACCESS_CORE; + if (in_mem_const(addr, size, L1_ROM_START, L1_ROM_LENGTH)) + return BFIN_MEM_ACCESS_DMA; + + return -EFAULT; +} + #if defined(CONFIG_ACCESS_CHECK) #ifdef CONFIG_ACCESS_OK_L1 __attribute__((l1_text)) @@ -353,51 +434,61 @@ int _access_ok(unsigned long addr, unsigned long size) { if (size == 0) return 1; - if (addr > (addr + size)) + /* Check that things do not wrap around */ + if (addr > ULONG_MAX - size) return 0; if (segment_eq(get_fs(), KERNEL_DS)) return 1; #ifdef CONFIG_MTD_UCLINUX - if (addr >= memory_start && (addr + size) <= memory_end) - return 1; - if (addr >= memory_mtd_end && (addr + size) <= physical_mem_end) + if (1) +#else + if (0) +#endif + { + if (in_mem(addr, size, memory_start, memory_end)) + return 1; + if (in_mem(addr, size, memory_mtd_end, physical_mem_end)) + return 1; +# ifndef CONFIG_ROMFS_ON_MTD + if (0) +# endif + /* For XIP, allow user space to use pointers within the ROMFS. */ + if (in_mem(addr, size, memory_mtd_start, memory_mtd_end)) + return 1; + } else { + if (in_mem(addr, size, memory_start, physical_mem_end)) + return 1; + } + + if (in_mem(addr, size, (unsigned long)__init_begin, (unsigned long)__init_end)) return 1; -#ifdef CONFIG_ROMFS_ON_MTD - /* For XIP, allow user space to use pointers within the ROMFS. */ - if (addr >= memory_mtd_start && (addr + size) <= memory_mtd_end) + if (in_mem_const(addr, size, L1_CODE_START, L1_CODE_LENGTH)) return 1; -#endif -#else - if (addr >= memory_start && (addr + size) <= physical_mem_end) + if (in_mem_const_off(addr, size, _etext_l1 - _stext_l1, L1_CODE_START, L1_CODE_LENGTH)) return 1; -#endif - if (addr >= (unsigned long)__init_begin && - addr + size <= (unsigned long)__init_end) + if (in_mem_const_off(addr, size, _ebss_l1 - _sdata_l1, L1_DATA_A_START, L1_DATA_A_LENGTH)) return 1; - if (addr >= get_l1_scratch_start() - && addr + size <= get_l1_scratch_start() + L1_SCRATCH_LENGTH) + if (in_mem_const_off(addr, size, _ebss_b_l1 - _sdata_b_l1, L1_DATA_B_START, L1_DATA_B_LENGTH)) return 1; -#if L1_CODE_LENGTH != 0 - if (addr >= get_l1_code_start() + (_etext_l1 - _stext_l1) - && addr + size <= get_l1_code_start() + L1_CODE_LENGTH) +#ifdef COREB_L1_CODE_START + if (in_mem_const(addr, size, COREB_L1_CODE_START, L1_CODE_LENGTH)) return 1; -#endif -#if L1_DATA_A_LENGTH != 0 - if (addr >= get_l1_data_a_start() + (_ebss_l1 - _sdata_l1) - && addr + size <= get_l1_data_a_start() + L1_DATA_A_LENGTH) + if (in_mem_const(addr, size, COREB_L1_SCRATCH_START, L1_SCRATCH_LENGTH)) return 1; -#endif -#if L1_DATA_B_LENGTH != 0 - if (addr >= get_l1_data_b_start() + (_ebss_b_l1 - _sdata_b_l1) - && addr + size <= get_l1_data_b_start() + L1_DATA_B_LENGTH) + if (in_mem_const(addr, size, COREB_L1_DATA_A_START, L1_DATA_A_LENGTH)) return 1; -#endif -#if L2_LENGTH != 0 - if (addr >= L2_START + (_ebss_l2 - _stext_l2) - && addr + size <= L2_START + L2_LENGTH) + if (in_mem_const(addr, size, COREB_L1_DATA_B_START, L1_DATA_B_LENGTH)) return 1; #endif + if (in_mem_const_off(addr, size, _ebss_l2 - _stext_l2, L2_START, L2_LENGTH)) + return 1; + + if (in_mem_const(addr, size, BOOT_ROM_START, BOOT_ROM_LENGTH)) + return 1; + if (in_mem_const(addr, size, L1_ROM_START, L1_ROM_LENGTH)) + return 1; + return 0; } EXPORT_SYMBOL(_access_ok); diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index d279552..8eeb457 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -37,6 +37,7 @@ #include <asm/traps.h> #include <asm/cacheflush.h> #include <asm/cplb.h> +#include <asm/dma.h> #include <asm/blackfin.h> #include <asm/irq_handler.h> #include <linux/irq.h> @@ -636,57 +637,30 @@ asmlinkage void trap_c(struct pt_regs *fp) */ static bool get_instruction(unsigned short *val, unsigned short *address) { - - unsigned long addr; - - addr = (unsigned long)address; + unsigned long addr = (unsigned long)address; /* Check for odd addresses */ if (addr & 0x1) return false; - /* Check that things do not wrap around */ - if (addr > (addr + 2)) + /* MMR region will never have instructions */ + if (addr >= SYSMMR_BASE) return false; - /* - * Since we are in exception context, we need to do a little address checking - * We need to make sure we are only accessing valid memory, and - * we don't read something in the async space that can hang forever - */ - if ((addr >= FIXED_CODE_START && (addr + 2) <= physical_mem_end) || -#if L2_LENGTH != 0 - (addr >= L2_START && (addr + 2) <= (L2_START + L2_LENGTH)) || -#endif - (addr >= BOOT_ROM_START && (addr + 2) <= (BOOT_ROM_START + BOOT_ROM_LENGTH)) || -#if L1_DATA_A_LENGTH != 0 - (addr >= L1_DATA_A_START && (addr + 2) <= (L1_DATA_A_START + L1_DATA_A_LENGTH)) || -#endif -#if L1_DATA_B_LENGTH != 0 - (addr >= L1_DATA_B_START && (addr + 2) <= (L1_DATA_B_START + L1_DATA_B_LENGTH)) || -#endif - (addr >= L1_SCRATCH_START && (addr + 2) <= (L1_SCRATCH_START + L1_SCRATCH_LENGTH)) || - (!(bfin_read_EBIU_AMBCTL0() & B0RDYEN) && - addr >= ASYNC_BANK0_BASE && (addr + 2) <= (ASYNC_BANK0_BASE + ASYNC_BANK0_SIZE)) || - (!(bfin_read_EBIU_AMBCTL0() & B1RDYEN) && - addr >= ASYNC_BANK1_BASE && (addr + 2) <= (ASYNC_BANK1_BASE + ASYNC_BANK1_SIZE)) || - (!(bfin_read_EBIU_AMBCTL1() & B2RDYEN) && - addr >= ASYNC_BANK2_BASE && (addr + 2) <= (ASYNC_BANK2_BASE + ASYNC_BANK1_SIZE)) || - (!(bfin_read_EBIU_AMBCTL1() & B3RDYEN) && - addr >= ASYNC_BANK3_BASE && (addr + 2) <= (ASYNC_BANK3_BASE + ASYNC_BANK1_SIZE))) { - *val = *address; - return true; + switch (bfin_mem_access_type(addr, 2)) { + case BFIN_MEM_ACCESS_CORE: + case BFIN_MEM_ACCESS_CORE_ONLY: + *val = *address; + return true; + case BFIN_MEM_ACCESS_DMA: + dma_memcpy(val, address, 2); + return true; + case BFIN_MEM_ACCESS_ITEST: + isram_memcpy(val, address, 2); + return true; + default: /* invalid access */ + return false; } - -#if L1_CODE_LENGTH != 0 - if (addr >= L1_CODE_START && (addr + 2) <= (L1_CODE_START + L1_CODE_LENGTH)) { - isram_memcpy(val, address, 2); - return true; - } -#endif - - - return false; } /* -- cgit v1.1 From 2780cd64346782a6116e316c559d70a7655ab6e5 Mon Sep 17 00:00:00 2001 From: Mike Frysinger <vapier@gentoo.org> Date: Thu, 11 Jun 2009 09:22:02 -0400 Subject: Blackfin: bf518f-ezbrd: update DSA resources The common DSA code changed structure layout, so update the BF518F-EZBRD resources accordingly. Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- arch/blackfin/mach-bf518/boards/ezbrd.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c index 1382f03..d979110 100644 --- a/arch/blackfin/mach-bf518/boards/ezbrd.c +++ b/arch/blackfin/mach-bf518/boards/ezbrd.c @@ -119,13 +119,19 @@ static struct platform_device bfin_mac_device = { }; #if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE) -static struct dsa_platform_data ksz8893m_switch_data = { +static struct dsa_chip_data ksz8893m_switch_chip_data = { .mii_bus = &bfin_mii_bus.dev, + .port_names = { + NULL, + "eth%d", + "eth%d", + "cpu", + }, +}; +static struct dsa_platform_data ksz8893m_switch_data = { + .nr_chips = 1, .netdev = &bfin_mac_device.dev, - .port_names[0] = NULL, - .port_names[1] = "eth%d", - .port_names[2] = "eth%d", - .port_names[3] = "cpu", + .chip = &ksz8893m_switch_chip_data, }; static struct platform_device ksz8893m_switch_device = { -- cgit v1.1 From 4d5e6fd42c137dad3b1aced073c6fcb494a8e507 Mon Sep 17 00:00:00 2001 From: Mike Frysinger <vapier@gentoo.org> Date: Sat, 13 Jun 2009 06:34:49 -0400 Subject: Blackfin: bf533-ezkit: add resources for FISP devices The BF533-EZKIT has two Flash In-System Programming devices hooked up to the async memory bus, so add resources for the primary flashes and the SRAMs on the devices. Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- arch/blackfin/mach-bf533/boards/ezkit.c | 106 ++++++++++++++++++++++++++++++++ 1 file changed, 106 insertions(+) (limited to 'arch') diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c index 89a5ec4..4e3e511 100644 --- a/arch/blackfin/mach-bf533/boards/ezkit.c +++ b/arch/blackfin/mach-bf533/boards/ezkit.c @@ -32,6 +32,7 @@ #include <linux/platform_device.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> +#include <linux/mtd/plat-ram.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) @@ -86,6 +87,101 @@ static struct platform_device smc91x_device = { }; #endif +#if defined(CONFIG_MTD_PSD4256G) || defined(CONFIG_MTD_PSD4256G_MODULE) +static const char *map_probes[] = { + "stm_flash", + NULL, +}; + +static struct platdata_mtd_ram stm_pri_data_a = { + .mapname = "Flash A Primary", + .map_probes = map_probes, + .bankwidth = 2, +}; + +static struct resource stm_pri_resource_a = { + .start = 0x20000000, + .end = 0x200fffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device stm_pri_device_a = { + .name = "mtd-ram", + .id = 0, + .dev = { + .platform_data = &stm_pri_data_a, + }, + .num_resources = 1, + .resource = &stm_pri_resource_a, +}; + +static struct platdata_mtd_ram stm_pri_data_b = { + .mapname = "Flash B Primary", + .map_probes = map_probes, + .bankwidth = 2, +}; + +static struct resource stm_pri_resource_b = { + .start = 0x20100000, + .end = 0x201fffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device stm_pri_device_b = { + .name = "mtd-ram", + .id = 4, + .dev = { + .platform_data = &stm_pri_data_b, + }, + .num_resources = 1, + .resource = &stm_pri_resource_b, +}; +#endif + +#if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE) +static struct platdata_mtd_ram sram_data_a = { + .mapname = "Flash A SRAM", + .bankwidth = 2, +}; + +static struct resource sram_resource_a = { + .start = 0x20240000, + .end = 0x2024ffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device sram_device_a = { + .name = "mtd-ram", + .id = 8, + .dev = { + .platform_data = &sram_data_a, + }, + .num_resources = 1, + .resource = &sram_resource_a, +}; + +static struct platdata_mtd_ram sram_data_b = { + .mapname = "Flash B SRAM", + .bankwidth = 2, +}; + +static struct resource sram_resource_b = { + .start = 0x202c0000, + .end = 0x202cffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device sram_device_b = { + .name = "mtd-ram", + .id = 9, + .dev = { + .platform_data = &sram_data_b, + }, + .num_resources = 1, + .resource = &sram_resource_b, +}; +#endif + #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) static struct mtd_partition bfin_spi_flash_partitions[] = { { @@ -357,6 +453,16 @@ static struct platform_device *ezkit_devices[] __initdata = { &bfin_dpmc, +#if defined(CONFIG_MTD_PSD4256G) || defined(CONFIG_MTD_PSD4256G_MODULE) + &stm_pri_device_a, + &stm_pri_device_b, +#endif + +#if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE) + &sram_device_a, + &sram_device_b, +#endif + #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) &smc91x_device, #endif -- cgit v1.1 From a200ad22bb15fe01cf222fa631687876baad5e01 Mon Sep 17 00:00:00 2001 From: Mike Frysinger <vapier@gentoo.org> Date: Sat, 13 Jun 2009 06:37:14 -0400 Subject: Blackfin: update anomaly lists Update anomaly headers to match latest released anomaly sheets. Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- arch/blackfin/mach-bf518/include/mach/anomaly.h | 37 ++++++---- arch/blackfin/mach-bf527/include/mach/anomaly.h | 15 ++++- arch/blackfin/mach-bf533/include/mach/anomaly.h | 77 +++++++++++---------- arch/blackfin/mach-bf537/include/mach/anomaly.h | 41 +++++++----- arch/blackfin/mach-bf538/include/mach/anomaly.h | 24 ++++--- arch/blackfin/mach-bf548/include/mach/anomaly.h | 20 ++++-- arch/blackfin/mach-bf561/include/mach/anomaly.h | 89 +++++++++++++------------ 7 files changed, 178 insertions(+), 125 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/mach-bf518/include/mach/anomaly.h b/arch/blackfin/mach-bf518/include/mach/anomaly.h index b69bd9a..426e064 100644 --- a/arch/blackfin/mach-bf518/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf518/include/mach/anomaly.h @@ -7,7 +7,7 @@ */ /* This file should be up to date with: - * - Revision B, 02/03/2009; ADSP-BF512/BF514/BF516/BF518 Blackfin Processor Anomaly List + * - Revision C, 06/12/2009; ADSP-BF512/BF514/BF516/BF518 Blackfin Processor Anomaly List */ /* We plan on not supporting 0.0 silicon, but 0.1 isn't out yet - sorry */ @@ -18,7 +18,7 @@ #ifndef _MACH_ANOMALY_H_ #define _MACH_ANOMALY_H_ -/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */ +/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */ #define ANOMALY_05000074 (1) /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */ #define ANOMALY_05000122 (1) @@ -45,29 +45,31 @@ /* Speculative Fetches of Indirect-Pointer Instructions Can Cause False Hardware Errors */ #define ANOMALY_05000426 (1) /* Software System Reset Corrupts PLL_LOCKCNT Register */ -#define ANOMALY_05000430 (1) +#define ANOMALY_05000430 (__SILICON_REVISION__ < 1) /* Incorrect Use of Stack in Lockbox Firmware During Authentication */ #define ANOMALY_05000431 (1) /* Certain SIC Registers are not Reset After Soft or Core Double Fault Reset */ -#define ANOMALY_05000435 (1) +#define ANOMALY_05000435 (__SILICON_REVISION__ < 1) /* PORTx_DRIVE and PORTx_HYSTERESIS Registers Read Back Incorrect Values */ -#define ANOMALY_05000438 (1) +#define ANOMALY_05000438 (__SILICON_REVISION__ < 1) /* Preboot Cannot be Used to Alter the PLL_DIV Register */ -#define ANOMALY_05000439 (1) +#define ANOMALY_05000439 (__SILICON_REVISION__ < 1) /* bfrom_SysControl() Cannot be Used to Write the PLL_DIV Register */ -#define ANOMALY_05000440 (1) +#define ANOMALY_05000440 (__SILICON_REVISION__ < 1) /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */ #define ANOMALY_05000443 (1) /* Incorrect L1 Instruction Bank B Memory Map Location */ -#define ANOMALY_05000444 (1) +#define ANOMALY_05000444 (__SILICON_REVISION__ < 1) /* Incorrect Default Hysteresis Setting for RESET, NMI, and BMODE Signals */ -#define ANOMALY_05000452 (1) +#define ANOMALY_05000452 (__SILICON_REVISION__ < 1) /* PWM_TRIPB Signal Not Available on PG10 */ -#define ANOMALY_05000453 (1) +#define ANOMALY_05000453 (__SILICON_REVISION__ < 1) /* PPI_FS3 is Driven One Half Cycle Later Than PPI Data */ -#define ANOMALY_05000455 (1) -/* False Hardware Error when RETI points to invalid memory */ +#define ANOMALY_05000455 (__SILICON_REVISION__ < 1) +/* False Hardware Error when RETI Points to Invalid Memory */ #define ANOMALY_05000461 (1) +/* Synchronization Problem at Startup May Cause SPORT Transmit Channels to Misalign */ +#define ANOMALY_05000462 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000099 (0) @@ -78,24 +80,30 @@ #define ANOMALY_05000158 (0) #define ANOMALY_05000171 (0) #define ANOMALY_05000179 (0) +#define ANOMALY_05000182 (0) #define ANOMALY_05000183 (0) #define ANOMALY_05000198 (0) +#define ANOMALY_05000202 (0) #define ANOMALY_05000215 (0) #define ANOMALY_05000220 (0) #define ANOMALY_05000227 (0) #define ANOMALY_05000230 (0) #define ANOMALY_05000231 (0) #define ANOMALY_05000233 (0) +#define ANOMALY_05000234 (0) #define ANOMALY_05000242 (0) #define ANOMALY_05000244 (0) #define ANOMALY_05000248 (0) #define ANOMALY_05000250 (0) +#define ANOMALY_05000257 (0) #define ANOMALY_05000261 (0) #define ANOMALY_05000263 (0) #define ANOMALY_05000266 (0) #define ANOMALY_05000273 (0) #define ANOMALY_05000274 (0) #define ANOMALY_05000278 (0) +#define ANOMALY_05000281 (0) +#define ANOMALY_05000283 (0) #define ANOMALY_05000285 (0) #define ANOMALY_05000287 (0) #define ANOMALY_05000301 (0) @@ -103,10 +111,13 @@ #define ANOMALY_05000307 (0) #define ANOMALY_05000311 (0) #define ANOMALY_05000312 (0) +#define ANOMALY_05000315 (0) #define ANOMALY_05000323 (0) #define ANOMALY_05000353 (0) +#define ANOMALY_05000357 (0) #define ANOMALY_05000362 (1) #define ANOMALY_05000363 (0) +#define ANOMALY_05000371 (0) #define ANOMALY_05000380 (0) #define ANOMALY_05000386 (0) #define ANOMALY_05000389 (0) @@ -117,5 +128,7 @@ #define ANOMALY_05000448 (0) #define ANOMALY_05000456 (0) #define ANOMALY_05000450 (0) +#define ANOMALY_05000465 (0) +#define ANOMALY_05000467 (0) #endif diff --git a/arch/blackfin/mach-bf527/include/mach/anomaly.h b/arch/blackfin/mach-bf527/include/mach/anomaly.h index c84ddea..0d63f74 100644 --- a/arch/blackfin/mach-bf527/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf527/include/mach/anomaly.h @@ -34,7 +34,7 @@ #define _ANOMALY_BF527(rev527) (ANOMALY_BF527 && __SILICON_REVISION__ rev527) #define _ANOMALY_BF526_BF527(rev526, rev527) (_ANOMALY_BF526(rev526) || _ANOMALY_BF527(rev527)) -/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */ +/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */ #define ANOMALY_05000074 (1) /* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */ #define ANOMALY_05000119 (1) /* note: brokenness is noted in documentation, not anomaly sheet */ @@ -184,8 +184,12 @@ #define ANOMALY_05000456 (1) /* Host DMA Port Responds to Certain Bus Activity Without HOST_CE Assertion */ #define ANOMALY_05000457 (1) -/* False Hardware Error when RETI points to invalid memory */ +/* False Hardware Error when RETI Points to Invalid Memory */ #define ANOMALY_05000461 (1) +/* USB Rx DMA hang */ +#define ANOMALY_05000465 (1) +/* Possible RX data corruption when control & data EP FIFOs are accessed via the core */ +#define ANOMALY_05000467 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000099 (0) @@ -195,24 +199,30 @@ #define ANOMALY_05000158 (0) #define ANOMALY_05000171 (0) #define ANOMALY_05000179 (0) +#define ANOMALY_05000182 (0) #define ANOMALY_05000183 (0) #define ANOMALY_05000198 (0) +#define ANOMALY_05000202 (0) #define ANOMALY_05000215 (0) #define ANOMALY_05000220 (0) #define ANOMALY_05000227 (0) #define ANOMALY_05000230 (0) #define ANOMALY_05000231 (0) #define ANOMALY_05000233 (0) +#define ANOMALY_05000234 (0) #define ANOMALY_05000242 (0) #define ANOMALY_05000244 (0) #define ANOMALY_05000248 (0) #define ANOMALY_05000250 (0) +#define ANOMALY_05000257 (0) #define ANOMALY_05000261 (0) #define ANOMALY_05000263 (0) #define ANOMALY_05000266 (0) #define ANOMALY_05000273 (0) #define ANOMALY_05000274 (0) #define ANOMALY_05000278 (0) +#define ANOMALY_05000281 (0) +#define ANOMALY_05000283 (0) #define ANOMALY_05000285 (0) #define ANOMALY_05000287 (0) #define ANOMALY_05000301 (0) @@ -220,6 +230,7 @@ #define ANOMALY_05000307 (0) #define ANOMALY_05000311 (0) #define ANOMALY_05000312 (0) +#define ANOMALY_05000315 (0) #define ANOMALY_05000323 (0) #define ANOMALY_05000362 (1) #define ANOMALY_05000363 (0) diff --git a/arch/blackfin/mach-bf533/include/mach/anomaly.h b/arch/blackfin/mach-bf533/include/mach/anomaly.h index 31145b5..70a0ad6 100644 --- a/arch/blackfin/mach-bf533/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf533/include/mach/anomaly.h @@ -34,7 +34,7 @@ # define ANOMALY_BF533 0 #endif -/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */ +/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */ #define ANOMALY_05000074 (1) /* UART Line Status Register (UART_LSR) Bits Are Not Updated at the Same Time */ #define ANOMALY_05000099 (__SILICON_REVISION__ < 5) @@ -46,7 +46,7 @@ #define ANOMALY_05000122 (1) /* Instruction DMA Can Cause Data Cache Fills to Fail (Boot Implications) */ #define ANOMALY_05000158 (__SILICON_REVISION__ < 5) -/* PPI Data Lengths Between 8 and 16 Do Not Zero Out Upper Bits */ +/* PPI Data Lengths between 8 and 16 Do Not Zero Out Upper Bits */ #define ANOMALY_05000166 (1) /* Turning SPORTs on while External Frame Sync Is Active May Corrupt Data */ #define ANOMALY_05000167 (1) @@ -56,13 +56,13 @@ #define ANOMALY_05000180 (1) /* Timer Pin Limitations for PPI TX Modes with External Frame Syncs */ #define ANOMALY_05000183 (__SILICON_REVISION__ < 4) -/* False Protection Exceptions */ +/* False Protection Exceptions when Speculative Fetch Is Cancelled */ #define ANOMALY_05000189 (__SILICON_REVISION__ < 4) /* False I/O Pin Interrupts on Edge-Sensitive Inputs When Polarity Setting Is Changed */ #define ANOMALY_05000193 (__SILICON_REVISION__ < 4) /* Restarting SPORT in Specific Modes May Cause Data Corruption */ #define ANOMALY_05000194 (__SILICON_REVISION__ < 4) -/* Failing MMR Accesses When Stalled by Preceding Memory Read */ +/* Failing MMR Accesses when Preceding Memory Read Stalls */ #define ANOMALY_05000198 (__SILICON_REVISION__ < 5) /* Current DMA Address Shows Wrong Value During Carry Fix */ #define ANOMALY_05000199 (__SILICON_REVISION__ < 4) @@ -74,7 +74,7 @@ #define ANOMALY_05000202 (__SILICON_REVISION__ < 5) /* Specific Sequence That Can Cause DMA Error or DMA Stopping */ #define ANOMALY_05000203 (__SILICON_REVISION__ < 4) -/* Incorrect data read with write-through cache and allocate cache lines on reads only mode */ +/* Incorrect Data Read with Writethrough "Allocate Cache Lines on Reads Only" Cache Mode */ #define ANOMALY_05000204 (__SILICON_REVISION__ < 4 && ANOMALY_BF533) /* Recovery from "Brown-Out" Condition */ #define ANOMALY_05000207 (__SILICON_REVISION__ < 4) @@ -106,7 +106,7 @@ #define ANOMALY_05000244 (__SILICON_REVISION__ < 5) /* False Hardware Error from an Access in the Shadow of a Conditional Branch */ #define ANOMALY_05000245 (1) -/* Data CPLBs Should Prevent Spurious Hardware Errors */ +/* Data CPLBs Should Prevent False Hardware Errors */ #define ANOMALY_05000246 (__SILICON_REVISION__ < 5) /* Incorrect Bit Shift of Data Word in Multichannel (TDM) Mode in Certain Conditions */ #define ANOMALY_05000250 (__SILICON_REVISION__ == 4) @@ -148,21 +148,21 @@ #define ANOMALY_05000277 (__SILICON_REVISION__ < 6) /* Disabling Peripherals with DMA Running May Cause DMA System Instability */ #define ANOMALY_05000278 (__SILICON_REVISION__ < 6) -/* False Hardware Error Exception When ISR Context Is Not Restored */ +/* False Hardware Error Exception when ISR Context Is Not Restored */ #define ANOMALY_05000281 (__SILICON_REVISION__ < 6) /* Memory DMA Corruption with 32-Bit Data and Traffic Control */ #define ANOMALY_05000282 (__SILICON_REVISION__ < 6) -/* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */ +/* System MMR Write Is Stalled Indefinitely when Killed in a Particular Stage */ #define ANOMALY_05000283 (__SILICON_REVISION__ < 6) /* SPORTs May Receive Bad Data If FIFOs Fill Up */ #define ANOMALY_05000288 (__SILICON_REVISION__ < 6) /* Memory-To-Memory DMA Source/Destination Descriptors Must Be in Same Memory Space */ #define ANOMALY_05000301 (__SILICON_REVISION__ < 6) -/* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */ +/* SSYNCs after Writes to DMA MMR Registers May Not Be Handled Correctly */ #define ANOMALY_05000302 (__SILICON_REVISION__ < 5) /* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */ #define ANOMALY_05000305 (__SILICON_REVISION__ < 5) -/* New Feature: Additional PPI Frame Sync Sampling Options (Not Available On Older Silicon) */ +/* ALT_TIMING Bit in PPI_CONTROL Register Is Not Functional */ #define ANOMALY_05000306 (__SILICON_REVISION__ < 5) /* SCKELOW Bit Does Not Maintain State Through Hibernate */ #define ANOMALY_05000307 (1) /* note: brokenness is noted in documentation, not anomaly sheet */ @@ -170,11 +170,11 @@ #define ANOMALY_05000310 (1) /* Erroneous Flag (GPIO) Pin Operations under Specific Sequences */ #define ANOMALY_05000311 (__SILICON_REVISION__ < 6) -/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */ +/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */ #define ANOMALY_05000312 (__SILICON_REVISION__ < 6) /* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */ #define ANOMALY_05000313 (__SILICON_REVISION__ < 6) -/* Killed System MMR Write Completes Erroneously On Next System MMR Access */ +/* Killed System MMR Write Completes Erroneously on Next System MMR Access */ #define ANOMALY_05000315 (__SILICON_REVISION__ < 6) /* Internal Voltage Regulator Values of 1.05V, 1.10V and 1.15V Not Allowed for LQFP Packages */ #define ANOMALY_05000319 ((ANOMALY_BF531 || ANOMALY_BF532) && __SILICON_REVISION__ < 6) @@ -200,7 +200,7 @@ #define ANOMALY_05000426 (1) /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */ #define ANOMALY_05000443 (1) -/* False Hardware Error when RETI points to invalid memory */ +/* False Hardware Error when RETI Points to Invalid Memory */ #define ANOMALY_05000461 (1) /* These anomalies have been "phased" out of analog.com anomaly sheets and are @@ -215,17 +215,17 @@ #define ANOMALY_05000070 (__SILICON_REVISION__ < 2) /* Writing FIO_DIR can corrupt a programmable flag's data */ #define ANOMALY_05000079 (__SILICON_REVISION__ < 2) -/* Timer Auto-Baud Mode requires the UART clock to be enabled */ +/* Timer Auto-Baud Mode requires the UART clock to be enabled. */ #define ANOMALY_05000086 (__SILICON_REVISION__ < 2) /* Internal Clocking Modes on SPORT0 not supported */ #define ANOMALY_05000088 (__SILICON_REVISION__ < 2) /* Internal voltage regulator does not wake up from an RTC wakeup */ #define ANOMALY_05000092 (__SILICON_REVISION__ < 2) -/* The IFLUSH instruction must be preceded by a CSYNC instruction */ +/* The IFLUSH Instruction Must Be Preceded by a CSYNC Instruction */ #define ANOMALY_05000093 (__SILICON_REVISION__ < 2) -/* Vectoring to an instruction that is presently being filled into the instruction cache may cause erroneous behavior */ +/* Vectoring to instruction that is being filled into the i-cache may cause erroneous behavior */ #define ANOMALY_05000095 (__SILICON_REVISION__ < 2) -/* PREFETCH, FLUSH, and FLUSHINV must be followed by a CSYNC */ +/* PREFETCH, FLUSH, and FLUSHINV Instructions Must Be Followed by a CSYNC Instruction */ #define ANOMALY_05000096 (__SILICON_REVISION__ < 2) /* Performance Monitor 0 and 1 are swapped when monitoring memory events */ #define ANOMALY_05000097 (__SILICON_REVISION__ < 2) @@ -235,45 +235,45 @@ #define ANOMALY_05000100 (__SILICON_REVISION__ < 2) /* Reading X_MODIFY or Y_MODIFY while DMA channel is active */ #define ANOMALY_05000101 (__SILICON_REVISION__ < 2) -/* Descriptor-based MemDMA may lock up with 32-bit transfers or if transfers span 64KB buffers */ +/* Descriptor MemDMA may lock up with 32-bit transfers or if transfers span 64KB buffers */ #define ANOMALY_05000102 (__SILICON_REVISION__ < 2) -/* Incorrect value written to the cycle counters */ +/* Incorrect Value Written to the Cycle Counters */ #define ANOMALY_05000103 (__SILICON_REVISION__ < 2) -/* Stores to L1 Data memory incorrect when a specific sequence is followed */ +/* Stores to L1 Data Memory Incorrect when a Specific Sequence Is Followed */ #define ANOMALY_05000104 (__SILICON_REVISION__ < 2) /* Programmable Flag (PF3) functionality not supported in all PPI modes */ #define ANOMALY_05000106 (__SILICON_REVISION__ < 2) /* Data store can be lost when targeting a cache line fill */ #define ANOMALY_05000107 (__SILICON_REVISION__ < 2) -/* Reserved bits in SYSCFG register not set at power on */ +/* Reserved Bits in SYSCFG Register Not Set at Power-On */ #define ANOMALY_05000109 (__SILICON_REVISION__ < 3) /* Infinite Core Stall */ #define ANOMALY_05000114 (__SILICON_REVISION__ < 2) -/* PPI_FSx may glitch when generated by the on chip Timers */ +/* PPI_FSx may glitch when generated by the on chip Timers. */ #define ANOMALY_05000115 (__SILICON_REVISION__ < 2) -/* Trace Buffers may record discontinuities into emulation mode and/or exception, NMI, reset handlers */ +/* Trace Buffers May Contain Errors in Emulation Mode and/or Exception, NMI, Reset Handlers */ #define ANOMALY_05000116 (__SILICON_REVISION__ < 3) /* DTEST registers allow access to Data Cache when DTEST_COMMAND< 14 >= 0 */ #define ANOMALY_05000117 (__SILICON_REVISION__ < 2) /* Booting from an 8-bit or 24-bit Addressable SPI device is not supported */ #define ANOMALY_05000118 (__SILICON_REVISION__ < 2) -/* DTEST_COMMAND initiated memory access may be incorrect if data cache or DMA is active */ +/* DTEST_COMMAND Initiated Memory Access May Be Incorrect If Data Cache or DMA Is Active */ #define ANOMALY_05000123 (__SILICON_REVISION__ < 3) /* DMA Lock-up at CCLK to SCLK ratios of 4:1, 2:1, or 1:1 */ #define ANOMALY_05000124 (__SILICON_REVISION__ < 3) -/* Erroneous exception when enabling cache */ +/* Erroneous Exception when Enabling Cache */ #define ANOMALY_05000125 (__SILICON_REVISION__ < 3) /* SPI clock polarity and phase bits incorrect during booting */ #define ANOMALY_05000126 (__SILICON_REVISION__ < 3) -/* DMEM_CONTROL is not set on Reset */ +/* DMEM_CONTROL<12> Is Not Set on Reset */ #define ANOMALY_05000137 (__SILICON_REVISION__ < 3) /* SPI boot will not complete if there is a zero fill block in the loader file */ #define ANOMALY_05000138 (__SILICON_REVISION__ == 2) -/* Timerx_Config must be set for using the PPI in GP output mode with internal Frame Syncs */ +/* TIMERx_CONFIG[5] must be set for PPI in GP output mode with internal Frame Syncs */ #define ANOMALY_05000139 (__SILICON_REVISION__ < 2) /* Allowing the SPORT RX FIFO to fill will cause an overflow */ #define ANOMALY_05000140 (__SILICON_REVISION__ < 3) -/* An Infinite Stall occurs with a particular sequence of consecutive dual dag events */ +/* Infinite Stall may occur with a particular sequence of consecutive dual dag events */ #define ANOMALY_05000141 (__SILICON_REVISION__ < 3) /* Interrupts may be lost when a programmable input flag is configured to be edge sensitive */ #define ANOMALY_05000142 (__SILICON_REVISION__ < 3) @@ -287,7 +287,7 @@ #define ANOMALY_05000146 (__SILICON_REVISION__ < 3) /* Source MDMA descriptor may stop with a DMA Error near beginning of descriptor fetch */ #define ANOMALY_05000147 (__SILICON_REVISION__ < 3) -/* When booting from a 16-bit asynchronous memory device, the upper 8-bits of each word must be 0x00 */ +/* When booting from 16-bit asynchronous memory, the upper 8 bits of each word must be 0x00 */ #define ANOMALY_05000148 (__SILICON_REVISION__ < 3) /* Frame Delay in SPORT Multichannel Mode */ #define ANOMALY_05000153 (__SILICON_REVISION__ < 3) @@ -295,13 +295,13 @@ #define ANOMALY_05000154 (__SILICON_REVISION__ < 3) /* Timer1 can not be used for PWMOUT mode when a certain PPI mode is in use */ #define ANOMALY_05000155 (__SILICON_REVISION__ < 3) -/* Killed 32-bit MMR write leads to next system MMR access thinking it should be 32-bit */ +/* Killed 32-Bit MMR Write Leads to Next System MMR Access Thinking It Should Be 32-Bit */ #define ANOMALY_05000157 (__SILICON_REVISION__ < 3) -/* SPORT transmit data is not gated by external frame sync in certain conditions */ +/* SPORT Transmit Data Is Not Gated by External Frame Sync in Certain Conditions */ #define ANOMALY_05000163 (__SILICON_REVISION__ < 3) -/* SDRAM auto-refresh and subsequent Power Ups */ +/* Undefined Behavior when Power-Up Sequence Is Issued to SDRAM during Auto-Refresh */ #define ANOMALY_05000168 (__SILICON_REVISION__ < 3) -/* DATA CPLB page miss can result in lost write-through cache data writes */ +/* DATA CPLB Page Miss Can Result in Lost Write-Through Data Cache Writes */ #define ANOMALY_05000169 (__SILICON_REVISION__ < 3) /* DMA vs Core accesses to external memory */ #define ANOMALY_05000173 (__SILICON_REVISION__ < 3) @@ -309,15 +309,15 @@ #define ANOMALY_05000174 (__SILICON_REVISION__ < 3) /* Overlapping Sequencer and Memory Stalls */ #define ANOMALY_05000175 (__SILICON_REVISION__ < 3) -/* Multiplication of (-1) by (-1) followed by an accumulator saturation */ +/* Overflow Bit Asserted when Multiplication of -1 by -1 Followed by Accumulator Saturation */ #define ANOMALY_05000176 (__SILICON_REVISION__ < 3) -/* Disabling the PPI resets the PPI configuration registers */ +/* Disabling the PPI Resets the PPI Configuration Registers */ #define ANOMALY_05000181 (__SILICON_REVISION__ < 3) -/* PPI TX Mode with 2 External Frame Syncs */ +/* Early PPI Transmit when FS1 Asserts before FS2 in TX Mode with 2 External Frame Syncs */ #define ANOMALY_05000185 (__SILICON_REVISION__ < 3) /* PPI does not invert the Driving PPICLK edge in Transmit Modes */ #define ANOMALY_05000191 (__SILICON_REVISION__ < 3) -/* In PPI Transmit Modes with External Frame Syncs POLC */ +/* In PPI Transmit Modes with External Frame Syncs POLC bit must be set to 1 */ #define ANOMALY_05000192 (__SILICON_REVISION__ < 3) /* Internal Voltage Regulator may not start up */ #define ANOMALY_05000206 (__SILICON_REVISION__ < 3) @@ -326,6 +326,7 @@ #define ANOMALY_05000120 (0) #define ANOMALY_05000149 (0) #define ANOMALY_05000171 (0) +#define ANOMALY_05000182 (0) #define ANOMALY_05000220 (0) #define ANOMALY_05000248 (0) #define ANOMALY_05000266 (0) @@ -345,5 +346,7 @@ #define ANOMALY_05000448 (0) #define ANOMALY_05000456 (0) #define ANOMALY_05000450 (0) +#define ANOMALY_05000465 (0) +#define ANOMALY_05000467 (0) #endif diff --git a/arch/blackfin/mach-bf537/include/mach/anomaly.h b/arch/blackfin/mach-bf537/include/mach/anomaly.h index fc96634..57c128c 100644 --- a/arch/blackfin/mach-bf537/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf537/include/mach/anomaly.h @@ -34,13 +34,13 @@ # define ANOMALY_BF537 0 #endif -/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */ +/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */ #define ANOMALY_05000074 (1) /* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */ #define ANOMALY_05000119 (1) /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */ #define ANOMALY_05000122 (1) -/* Killed 32-bit MMR write leads to next system MMR access thinking it should be 32-bit */ +/* Killed 32-Bit MMR Write Leads to Next System MMR Access Thinking It Should Be 32-Bit */ #define ANOMALY_05000157 (__SILICON_REVISION__ < 2) /* PPI_DELAY Not Functional in PPI Modes with 0 Frame Syncs */ #define ANOMALY_05000180 (1) @@ -50,11 +50,11 @@ #define ANOMALY_05000244 (__SILICON_REVISION__ < 3) /* False Hardware Error from an Access in the Shadow of a Conditional Branch */ #define ANOMALY_05000245 (1) -/* CLKIN Buffer Output Enable Reset Behavior Is Changed */ +/* Buffered CLKIN Output Is Disabled by Default */ #define ANOMALY_05000247 (1) /* Incorrect Bit Shift of Data Word in Multichannel (TDM) Mode in Certain Conditions */ #define ANOMALY_05000250 (__SILICON_REVISION__ < 3) -/* EMAC Tx DMA error after an early frame abort */ +/* EMAC TX DMA Error After an Early Frame Abort */ #define ANOMALY_05000252 (__SILICON_REVISION__ < 3) /* Maximum External Clock Speed for Timers */ #define ANOMALY_05000253 (__SILICON_REVISION__ < 3) @@ -62,7 +62,7 @@ #define ANOMALY_05000254 (__SILICON_REVISION__ > 2) /* Entering Hibernate State with RTC Seconds Interrupt Not Functional */ #define ANOMALY_05000255 (__SILICON_REVISION__ < 3) -/* EMAC MDIO input latched on wrong MDC edge */ +/* EMAC MDIO Input Latched on Wrong MDC Edge */ #define ANOMALY_05000256 (__SILICON_REVISION__ < 3) /* Interrupt/Exception During Short Hardware Loop May Cause Bad Instruction Fetches */ #define ANOMALY_05000257 (__SILICON_REVISION__ < 3) @@ -80,7 +80,7 @@ #define ANOMALY_05000264 (__SILICON_REVISION__ < 3) /* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */ #define ANOMALY_05000265 (1) -/* Memory DMA error when peripheral DMA is running with non-zero DEB_TRAFFIC_PERIOD */ +/* Memory DMA Error when Peripheral DMA Is Running with Non-Zero DEB_TRAFFIC_PERIOD */ #define ANOMALY_05000268 (__SILICON_REVISION__ < 3) /* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Decrease */ #define ANOMALY_05000270 (__SILICON_REVISION__ < 3) @@ -92,15 +92,15 @@ #define ANOMALY_05000277 (__SILICON_REVISION__ < 3) /* Disabling Peripherals with DMA Running May Cause DMA System Instability */ #define ANOMALY_05000278 (((ANOMALY_BF536 || ANOMALY_BF537) && __SILICON_REVISION__ < 3) || (ANOMALY_BF534 && __SILICON_REVISION__ < 2)) -/* SPI Master boot mode does not work well with Atmel Data flash devices */ +/* SPI Master Boot Mode Does Not Work Well with Atmel Data Flash Devices */ #define ANOMALY_05000280 (1) -/* False Hardware Error Exception When ISR Context Is Not Restored */ +/* False Hardware Error Exception when ISR Context Is Not Restored */ #define ANOMALY_05000281 (__SILICON_REVISION__ < 3) /* Memory DMA Corruption with 32-Bit Data and Traffic Control */ #define ANOMALY_05000282 (__SILICON_REVISION__ < 3) -/* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */ +/* System MMR Write Is Stalled Indefinitely when Killed in a Particular Stage */ #define ANOMALY_05000283 (__SILICON_REVISION__ < 3) -/* New Feature: EMAC TX DMA Word Alignment (Not Available On Older Silicon) */ +/* TXDWA Bit in EMAC_SYSCTL Register Is Not Functional */ #define ANOMALY_05000285 (__SILICON_REVISION__ < 3) /* SPORTs May Receive Bad Data If FIFOs Fill Up */ #define ANOMALY_05000288 (__SILICON_REVISION__ < 3) @@ -112,25 +112,25 @@ #define ANOMALY_05000305 (__SILICON_REVISION__ < 3) /* SCKELOW Bit Does Not Maintain State Through Hibernate */ #define ANOMALY_05000307 (__SILICON_REVISION__ < 3) -/* Writing UART_THR while UART clock is disabled sends erroneous start bit */ +/* Writing UART_THR While UART Clock Is Disabled Sends Erroneous Start Bit */ #define ANOMALY_05000309 (__SILICON_REVISION__ < 3) /* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */ #define ANOMALY_05000310 (1) -/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */ +/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */ #define ANOMALY_05000312 (1) /* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */ #define ANOMALY_05000313 (1) -/* Killed System MMR Write Completes Erroneously On Next System MMR Access */ +/* Killed System MMR Write Completes Erroneously on Next System MMR Access */ #define ANOMALY_05000315 (__SILICON_REVISION__ < 3) -/* EMAC RMII mode: collisions occur in Full Duplex mode */ +/* EMAC RMII Mode: Collisions Occur in Full Duplex Mode */ #define ANOMALY_05000316 (__SILICON_REVISION__ < 3) -/* EMAC RMII mode: TX frames in half duplex fail with status No Carrier */ +/* EMAC RMII Mode: TX Frames in Half Duplex Fail with Status "No Carrier" */ #define ANOMALY_05000321 (__SILICON_REVISION__ < 3) -/* EMAC RMII mode at 10-Base-T speed: RX frames not received properly */ +/* EMAC RMII Mode at 10-Base-T Speed: RX Frames Not Received Properly */ #define ANOMALY_05000322 (1) /* Ethernet MAC MDIO Reads Do Not Meet IEEE Specification */ #define ANOMALY_05000341 (__SILICON_REVISION__ >= 3) -/* New Feature: UART Remains Enabled after UART Boot */ +/* UART Gets Disabled after UART Boot */ #define ANOMALY_05000350 (__SILICON_REVISION__ >= 3) /* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */ #define ANOMALY_05000355 (1) @@ -154,7 +154,7 @@ #define ANOMALY_05000426 (1) /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */ #define ANOMALY_05000443 (1) -/* False Hardware Error when RETI points to invalid memory */ +/* False Hardware Error when RETI Points to Invalid Memory */ #define ANOMALY_05000461 (1) /* Anomalies that don't exist on this proc */ @@ -165,14 +165,17 @@ #define ANOMALY_05000158 (0) #define ANOMALY_05000171 (0) #define ANOMALY_05000179 (0) +#define ANOMALY_05000182 (0) #define ANOMALY_05000183 (0) #define ANOMALY_05000198 (0) +#define ANOMALY_05000202 (0) #define ANOMALY_05000215 (0) #define ANOMALY_05000220 (0) #define ANOMALY_05000227 (0) #define ANOMALY_05000230 (0) #define ANOMALY_05000231 (0) #define ANOMALY_05000233 (0) +#define ANOMALY_05000234 (0) #define ANOMALY_05000242 (0) #define ANOMALY_05000248 (0) #define ANOMALY_05000266 (0) @@ -195,5 +198,7 @@ #define ANOMALY_05000448 (0) #define ANOMALY_05000456 (0) #define ANOMALY_05000450 (0) +#define ANOMALY_05000465 (0) +#define ANOMALY_05000467 (0) #endif diff --git a/arch/blackfin/mach-bf538/include/mach/anomaly.h b/arch/blackfin/mach-bf538/include/mach/anomaly.h index 175ca9e..c97acdf 100644 --- a/arch/blackfin/mach-bf538/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf538/include/mach/anomaly.h @@ -30,13 +30,13 @@ # define ANOMALY_BF539 0 #endif -/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */ +/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */ #define ANOMALY_05000074 (1) /* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */ #define ANOMALY_05000119 (1) /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */ #define ANOMALY_05000122 (1) -/* PPI Data Lengths Between 8 and 16 Do Not Zero Out Upper Bits */ +/* PPI Data Lengths between 8 and 16 Do Not Zero Out Upper Bits */ #define ANOMALY_05000166 (1) /* PPI_COUNT Cannot Be Programmed to 0 in General Purpose TX or RX Modes */ #define ANOMALY_05000179 (1) @@ -70,11 +70,11 @@ #define ANOMALY_05000277 (__SILICON_REVISION__ < 4) /* Disabling Peripherals with DMA Running May Cause DMA System Instability */ #define ANOMALY_05000278 (__SILICON_REVISION__ < 4) -/* False Hardware Error Exception When ISR Context Is Not Restored */ +/* False Hardware Error Exception when ISR Context Is Not Restored */ #define ANOMALY_05000281 (__SILICON_REVISION__ < 4) /* Memory DMA Corruption with 32-Bit Data and Traffic Control */ #define ANOMALY_05000282 (__SILICON_REVISION__ < 4) -/* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */ +/* System MMR Write Is Stalled Indefinitely when Killed in a Particular Stage */ #define ANOMALY_05000283 (__SILICON_REVISION__ < 4) /* SPORTs May Receive Bad Data If FIFOs Fill Up */ #define ANOMALY_05000288 (__SILICON_REVISION__ < 4) @@ -92,11 +92,11 @@ #define ANOMALY_05000307 (__SILICON_REVISION__ < 4) /* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */ #define ANOMALY_05000310 (1) -/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */ +/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */ #define ANOMALY_05000312 (__SILICON_REVISION__ < 5) /* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */ #define ANOMALY_05000313 (__SILICON_REVISION__ < 4) -/* Killed System MMR Write Completes Erroneously On Next System MMR Access */ +/* Killed System MMR Write Completes Erroneously on Next System MMR Access */ #define ANOMALY_05000315 (__SILICON_REVISION__ < 4) /* PFx Glitch on Write to FIO_FLAG_D or FIO_FLAG_T */ #define ANOMALY_05000318 (ANOMALY_BF539 && __SILICON_REVISION__ < 4) @@ -110,7 +110,7 @@ #define ANOMALY_05000371 (__SILICON_REVISION__ < 5) /* Entering Hibernate State with Peripheral Wakeups Enabled Draws Excess Current */ #define ANOMALY_05000374 (__SILICON_REVISION__ == 4) -/* New Feature: Open-Drain GPIO Outputs on PC1 and PC4 (Not Available on Older Silicon) */ +/* GPIO Pins PC1 and PC4 Can Function as Normal Outputs */ #define ANOMALY_05000375 (__SILICON_REVISION__ < 4) /* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */ #define ANOMALY_05000402 (__SILICON_REVISION__ < 4) @@ -126,26 +126,32 @@ #define ANOMALY_05000436 (__SILICON_REVISION__ > 3) /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */ #define ANOMALY_05000443 (1) -/* False Hardware Error when RETI points to invalid memory */ +/* False Hardware Error when RETI Points to Invalid Memory */ #define ANOMALY_05000461 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000099 (0) #define ANOMALY_05000120 (0) +#define ANOMALY_05000125 (0) #define ANOMALY_05000149 (0) #define ANOMALY_05000158 (0) #define ANOMALY_05000171 (0) +#define ANOMALY_05000182 (0) #define ANOMALY_05000198 (0) +#define ANOMALY_05000202 (0) #define ANOMALY_05000215 (0) #define ANOMALY_05000220 (0) #define ANOMALY_05000227 (0) #define ANOMALY_05000230 (0) #define ANOMALY_05000231 (0) +#define ANOMALY_05000234 (0) #define ANOMALY_05000242 (0) #define ANOMALY_05000248 (0) #define ANOMALY_05000250 (0) #define ANOMALY_05000254 (0) +#define ANOMALY_05000257 (0) #define ANOMALY_05000263 (0) +#define ANOMALY_05000266 (0) #define ANOMALY_05000274 (0) #define ANOMALY_05000287 (0) #define ANOMALY_05000305 (0) @@ -166,5 +172,7 @@ #define ANOMALY_05000448 (0) #define ANOMALY_05000456 (0) #define ANOMALY_05000450 (0) +#define ANOMALY_05000465 (0) +#define ANOMALY_05000467 (0) #endif diff --git a/arch/blackfin/mach-bf548/include/mach/anomaly.h b/arch/blackfin/mach-bf548/include/mach/anomaly.h index c510ae6..18a4cd24 100644 --- a/arch/blackfin/mach-bf548/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf548/include/mach/anomaly.h @@ -18,7 +18,7 @@ # error will not work on BF548 silicon version 0.0, or 0.1 #endif -/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */ +/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */ #define ANOMALY_05000074 (1) /* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */ #define ANOMALY_05000119 (1) @@ -30,17 +30,17 @@ #define ANOMALY_05000265 (1) /* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */ #define ANOMALY_05000272 (1) -/* False Hardware Error Exception When ISR Context Is Not Restored */ +/* False Hardware Error Exception when ISR Context Is Not Restored */ #define ANOMALY_05000281 (__SILICON_REVISION__ < 1) /* SSYNCs After Writes To CAN/DMA MMR Registers Are Not Always Handled Correctly */ #define ANOMALY_05000304 (__SILICON_REVISION__ < 1) /* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */ #define ANOMALY_05000310 (1) -/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */ +/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */ #define ANOMALY_05000312 (__SILICON_REVISION__ < 1) /* TWI Slave Boot Mode Is Not Functional */ #define ANOMALY_05000324 (__SILICON_REVISION__ < 1) -/* External FIFO Boot Mode Is Not Functional */ +/* FIFO Boot Mode Not Functional */ #define ANOMALY_05000325 (__SILICON_REVISION__ < 2) /* Data Lost When Core and DMA Accesses Are Made to the USB FIFO Simultaneously */ #define ANOMALY_05000327 (__SILICON_REVISION__ < 1) @@ -178,8 +178,12 @@ #define ANOMALY_05000450 (1) /* USB Receive Interrupt Is Not Generated in DMA Mode 1 */ #define ANOMALY_05000456 (__SILICON_REVISION__ < 3) -/* False Hardware Error when RETI points to invalid memory */ +/* False Hardware Error when RETI Points to Invalid Memory */ #define ANOMALY_05000461 (1) +/* USB Rx DMA hang */ +#define ANOMALY_05000465 (1) +/* Possible RX data corruption when control & data EP FIFOs are accessed via the core */ +#define ANOMALY_05000467 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000099 (0) @@ -189,30 +193,36 @@ #define ANOMALY_05000158 (0) #define ANOMALY_05000171 (0) #define ANOMALY_05000179 (0) +#define ANOMALY_05000182 (0) #define ANOMALY_05000183 (0) #define ANOMALY_05000198 (0) +#define ANOMALY_05000202 (0) #define ANOMALY_05000215 (0) #define ANOMALY_05000220 (0) #define ANOMALY_05000227 (0) #define ANOMALY_05000230 (0) #define ANOMALY_05000231 (0) #define ANOMALY_05000233 (0) +#define ANOMALY_05000234 (0) #define ANOMALY_05000242 (0) #define ANOMALY_05000244 (0) #define ANOMALY_05000248 (0) #define ANOMALY_05000250 (0) #define ANOMALY_05000254 (0) +#define ANOMALY_05000257 (0) #define ANOMALY_05000261 (0) #define ANOMALY_05000263 (0) #define ANOMALY_05000266 (0) #define ANOMALY_05000273 (0) #define ANOMALY_05000274 (0) #define ANOMALY_05000278 (0) +#define ANOMALY_05000283 (0) #define ANOMALY_05000287 (0) #define ANOMALY_05000301 (0) #define ANOMALY_05000305 (0) #define ANOMALY_05000307 (0) #define ANOMALY_05000311 (0) +#define ANOMALY_05000315 (0) #define ANOMALY_05000323 (0) #define ANOMALY_05000362 (1) #define ANOMALY_05000363 (0) diff --git a/arch/blackfin/mach-bf561/include/mach/anomaly.h b/arch/blackfin/mach-bf561/include/mach/anomaly.h index dccd396c..94b8e27 100644 --- a/arch/blackfin/mach-bf561/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf561/include/mach/anomaly.h @@ -18,19 +18,19 @@ # error will not work on BF561 silicon version 0.0, 0.1, 0.2, or 0.4 #endif -/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */ +/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */ #define ANOMALY_05000074 (1) /* UART Line Status Register (UART_LSR) Bits Are Not Updated at the Same Time */ #define ANOMALY_05000099 (__SILICON_REVISION__ < 5) -/* Trace Buffers may record discontinuities into emulation mode and/or exception, NMI, reset handlers */ +/* Trace Buffers May Contain Errors in Emulation Mode and/or Exception, NMI, Reset Handlers */ #define ANOMALY_05000116 (__SILICON_REVISION__ < 3) -/* Testset instructions restricted to 32-bit aligned memory locations */ +/* TESTSET Instructions Restricted to 32-Bit Aligned Memory Locations */ #define ANOMALY_05000120 (1) /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */ #define ANOMALY_05000122 (1) -/* Erroneous exception when enabling cache */ +/* Erroneous Exception when Enabling Cache */ #define ANOMALY_05000125 (__SILICON_REVISION__ < 3) -/* Signbits instruction not functional under certain conditions */ +/* SIGNBITS Instruction Not Functional under Certain Conditions */ #define ANOMALY_05000127 (1) /* Two bits in the Watchpoint Status Register (WPSTAT) are swapped */ #define ANOMALY_05000134 (__SILICON_REVISION__ < 3) @@ -40,7 +40,7 @@ #define ANOMALY_05000136 (__SILICON_REVISION__ < 3) /* Allowing the SPORT RX FIFO to fill will cause an overflow */ #define ANOMALY_05000140 (__SILICON_REVISION__ < 3) -/* An Infinite Stall occurs with a particular sequence of consecutive dual dag events */ +/* Infinite Stall may occur with a particular sequence of consecutive dual dag events */ #define ANOMALY_05000141 (__SILICON_REVISION__ < 3) /* Interrupts may be lost when a programmable input flag is configured to be edge sensitive */ #define ANOMALY_05000142 (__SILICON_REVISION__ < 3) @@ -52,7 +52,7 @@ #define ANOMALY_05000146 (__SILICON_REVISION__ < 3) /* Source MDMA descriptor may stop with a DMA Error near beginning of descriptor fetch */ #define ANOMALY_05000147 (__SILICON_REVISION__ < 3) -/* IMDMA S1/D1 channel may stall */ +/* IMDMA S1/D1 Channel May Stall */ #define ANOMALY_05000149 (1) /* DMA engine may lose data due to incorrect handshaking */ #define ANOMALY_05000150 (__SILICON_REVISION__ < 3) @@ -66,7 +66,7 @@ #define ANOMALY_05000154 (__SILICON_REVISION__ < 3) /* Timers in PWM-Out Mode with PPI GP Receive (Input) Mode with 0 Frame Syncs */ #define ANOMALY_05000156 (__SILICON_REVISION__ < 4) -/* Killed 32-bit MMR write leads to next system MMR access thinking it should be 32-bit */ +/* Killed 32-Bit MMR Write Leads to Next System MMR Access Thinking It Should Be 32-Bit */ #define ANOMALY_05000157 (__SILICON_REVISION__ < 3) /* DMA Lock-up at CCLK to SCLK ratios of 4:1, 2:1, or 1:1 */ #define ANOMALY_05000159 (__SILICON_REVISION__ < 3) @@ -76,17 +76,17 @@ #define ANOMALY_05000161 (__SILICON_REVISION__ < 3) /* DMEM_CONTROL<12> is not set on Reset */ #define ANOMALY_05000162 (__SILICON_REVISION__ < 3) -/* SPORT transmit data is not gated by external frame sync in certain conditions */ +/* SPORT Transmit Data Is Not Gated by External Frame Sync in Certain Conditions */ #define ANOMALY_05000163 (__SILICON_REVISION__ < 3) -/* PPI Data Lengths Between 8 and 16 Do Not Zero Out Upper Bits */ +/* PPI Data Lengths between 8 and 16 Do Not Zero Out Upper Bits */ #define ANOMALY_05000166 (1) /* Turning SPORTs on while External Frame Sync Is Active May Corrupt Data */ #define ANOMALY_05000167 (1) -/* SDRAM auto-refresh and subsequent Power Ups */ +/* Undefined Behavior when Power-Up Sequence Is Issued to SDRAM during Auto-Refresh */ #define ANOMALY_05000168 (__SILICON_REVISION__ < 5) -/* DATA CPLB page miss can result in lost write-through cache data writes */ +/* DATA CPLB Page Miss Can Result in Lost Write-Through Data Cache Writes */ #define ANOMALY_05000169 (__SILICON_REVISION__ < 5) -/* Boot-ROM code modifies SICA_IWRx wakeup registers */ +/* Boot-ROM Modifies SICA_IWRx Wakeup Registers */ #define ANOMALY_05000171 (__SILICON_REVISION__ < 5) /* DSPID register values incorrect */ #define ANOMALY_05000172 (__SILICON_REVISION__ < 3) @@ -96,29 +96,29 @@ #define ANOMALY_05000174 (__SILICON_REVISION__ < 5) /* Overlapping Sequencer and Memory Stalls */ #define ANOMALY_05000175 (__SILICON_REVISION__ < 5) -/* Multiplication of (-1) by (-1) followed by an accumulator saturation */ +/* Overflow Bit Asserted when Multiplication of -1 by -1 Followed by Accumulator Saturation */ #define ANOMALY_05000176 (__SILICON_REVISION__ < 5) /* PPI_COUNT Cannot Be Programmed to 0 in General Purpose TX or RX Modes */ #define ANOMALY_05000179 (__SILICON_REVISION__ < 5) /* PPI_DELAY Not Functional in PPI Modes with 0 Frame Syncs */ #define ANOMALY_05000180 (1) -/* Disabling the PPI resets the PPI configuration registers */ +/* Disabling the PPI Resets the PPI Configuration Registers */ #define ANOMALY_05000181 (__SILICON_REVISION__ < 5) -/* IMDMA does not operate to full speed for 600MHz and higher devices */ +/* Internal Memory DMA Does Not Operate at Full Speed */ #define ANOMALY_05000182 (1) -/* Timer Pin limitations for PPI TX Modes with External Frame Syncs */ +/* Timer Pin Limitations for PPI TX Modes with External Frame Syncs */ #define ANOMALY_05000184 (__SILICON_REVISION__ < 5) -/* PPI TX Mode with 2 External Frame Syncs */ +/* Early PPI Transmit when FS1 Asserts before FS2 in TX Mode with 2 External Frame Syncs */ #define ANOMALY_05000185 (__SILICON_REVISION__ < 5) -/* PPI packing with Data Length greater than 8 bits (not a meaningful mode) */ +/* Upper PPI Pins Driven when PPI Packing Enabled and Data Length >8 Bits */ #define ANOMALY_05000186 (__SILICON_REVISION__ < 5) /* IMDMA Corrupted Data after a Halt */ #define ANOMALY_05000187 (1) /* IMDMA Restrictions on Descriptor and Buffer Placement in Memory */ #define ANOMALY_05000188 (__SILICON_REVISION__ < 5) -/* False Protection Exceptions */ +/* False Protection Exceptions when Speculative Fetch Is Cancelled */ #define ANOMALY_05000189 (__SILICON_REVISION__ < 5) -/* PPI not functional at core voltage < 1Volt */ +/* PPI Not Functional at Core Voltage < 1Volt */ #define ANOMALY_05000190 (1) /* PPI does not invert the Driving PPICLK edge in Transmit Modes */ #define ANOMALY_05000191 (__SILICON_REVISION__ < 3) @@ -126,7 +126,7 @@ #define ANOMALY_05000193 (__SILICON_REVISION__ < 5) /* Restarting SPORT in Specific Modes May Cause Data Corruption */ #define ANOMALY_05000194 (__SILICON_REVISION__ < 5) -/* Failing MMR Accesses When Stalled by Preceding Memory Read */ +/* Failing MMR Accesses when Preceding Memory Read Stalls */ #define ANOMALY_05000198 (__SILICON_REVISION__ < 5) /* Current DMA Address Shows Wrong Value During Carry Fix */ #define ANOMALY_05000199 (__SILICON_REVISION__ < 5) @@ -134,9 +134,9 @@ #define ANOMALY_05000200 (__SILICON_REVISION__ < 5) /* Possible Infinite Stall with Specific Dual-DAG Situation */ #define ANOMALY_05000202 (__SILICON_REVISION__ < 5) -/* Incorrect data read with write-through cache and allocate cache lines on reads only mode */ +/* Incorrect Data Read with Writethrough "Allocate Cache Lines on Reads Only" Cache Mode */ #define ANOMALY_05000204 (__SILICON_REVISION__ < 5) -/* Specific sequence that can cause DMA error or DMA stopping */ +/* Specific Sequence that Can Cause DMA Error or DMA Stopping */ #define ANOMALY_05000205 (__SILICON_REVISION__ < 5) /* Recovery from "Brown-Out" Condition */ #define ANOMALY_05000207 (__SILICON_REVISION__ < 5) @@ -158,7 +158,7 @@ #define ANOMALY_05000230 (__SILICON_REVISION__ < 5) /* UART STB Bit Incorrectly Affects Receiver Setting */ #define ANOMALY_05000231 (__SILICON_REVISION__ < 5) -/* SPORT data transmit lines are incorrectly driven in multichannel mode */ +/* SPORT Data Transmit Lines Are Incorrectly Driven in Multichannel Mode */ #define ANOMALY_05000232 (__SILICON_REVISION__ < 5) /* DF Bit in PLL_CTL Register Does Not Respond to Hardware Reset */ #define ANOMALY_05000242 (__SILICON_REVISION__ < 5) @@ -166,7 +166,7 @@ #define ANOMALY_05000244 (__SILICON_REVISION__ < 5) /* False Hardware Error from an Access in the Shadow of a Conditional Branch */ #define ANOMALY_05000245 (__SILICON_REVISION__ < 5) -/* TESTSET operation forces stall on the other core */ +/* TESTSET Operation Forces Stall on the Other Core */ #define ANOMALY_05000248 (__SILICON_REVISION__ < 5) /* Incorrect Bit Shift of Data Word in Multichannel (TDM) Mode in Certain Conditions */ #define ANOMALY_05000250 (__SILICON_REVISION__ > 2 && __SILICON_REVISION__ < 5) @@ -192,9 +192,9 @@ #define ANOMALY_05000264 (__SILICON_REVISION__ < 5) /* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */ #define ANOMALY_05000265 (__SILICON_REVISION__ < 5) -/* IMDMA destination IRQ status must be read prior to using IMDMA */ +/* IMDMA Destination IRQ Status Must Be Read Prior to Using IMDMA */ #define ANOMALY_05000266 (__SILICON_REVISION__ > 3) -/* IMDMA may corrupt data under certain conditions */ +/* IMDMA May Corrupt Data under Certain Conditions */ #define ANOMALY_05000267 (1) /* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Increase */ #define ANOMALY_05000269 (1) @@ -202,7 +202,7 @@ #define ANOMALY_05000270 (1) /* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */ #define ANOMALY_05000272 (1) -/* Data cache write back to external synchronous memory may be lost */ +/* Data Cache Write Back to External Synchronous Memory May Be Lost */ #define ANOMALY_05000274 (1) /* PPI Timing and Sampling Information Updates */ #define ANOMALY_05000275 (__SILICON_REVISION__ > 2) @@ -212,17 +212,17 @@ #define ANOMALY_05000277 (__SILICON_REVISION__ < 3) /* Disabling Peripherals with DMA Running May Cause DMA System Instability */ #define ANOMALY_05000278 (__SILICON_REVISION__ < 5) -/* False Hardware Error Exception When ISR Context Is Not Restored */ +/* False Hardware Error Exception when ISR Context Is Not Restored */ #define ANOMALY_05000281 (__SILICON_REVISION__ < 5) -/* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */ +/* System MMR Write Is Stalled Indefinitely when Killed in a Particular Stage */ #define ANOMALY_05000283 (1) -/* A read will receive incorrect data under certain conditions */ +/* Reads Will Receive Incorrect Data under Certain Conditions */ #define ANOMALY_05000287 (__SILICON_REVISION__ < 5) /* SPORTs May Receive Bad Data If FIFOs Fill Up */ #define ANOMALY_05000288 (__SILICON_REVISION__ < 5) /* Memory-To-Memory DMA Source/Destination Descriptors Must Be in Same Memory Space */ #define ANOMALY_05000301 (1) -/* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */ +/* SSYNCs after Writes to DMA MMR Registers May Not Be Handled Correctly */ #define ANOMALY_05000302 (1) /* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */ #define ANOMALY_05000305 (__SILICON_REVISION__ < 5) @@ -230,25 +230,25 @@ #define ANOMALY_05000307 (__SILICON_REVISION__ < 5) /* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */ #define ANOMALY_05000310 (1) -/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */ +/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */ #define ANOMALY_05000312 (1) /* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */ #define ANOMALY_05000313 (1) -/* Killed System MMR Write Completes Erroneously On Next System MMR Access */ +/* Killed System MMR Write Completes Erroneously on Next System MMR Access */ #define ANOMALY_05000315 (1) -/* PF2 Output Remains Asserted After SPI Master Boot */ +/* PF2 Output Remains Asserted after SPI Master Boot */ #define ANOMALY_05000320 (__SILICON_REVISION__ > 3) -/* Erroneous GPIO Flag Pin Operations Under Specific Sequences */ +/* Erroneous GPIO Flag Pin Operations under Specific Sequences */ #define ANOMALY_05000323 (1) -/* SPORT Secondary Receive Channel Not Functional When Word Length Exceeds 16 Bits */ +/* SPORT Secondary Receive Channel Not Functional when Word Length >16 Bits */ #define ANOMALY_05000326 (__SILICON_REVISION__ > 3) -/* New Feature: 24-Bit SPI Boot Mode Support (Not Available On Older Silicon) */ +/* 24-Bit SPI Boot Mode Is Not Functional */ #define ANOMALY_05000331 (__SILICON_REVISION__ < 5) -/* New Feature: Slave SPI Boot Mode Supported (Not Available On Older Silicon) */ +/* Slave SPI Boot Mode Is Not Functional */ #define ANOMALY_05000332 (__SILICON_REVISION__ < 5) -/* Flag Data Register Writes One SCLK Cycle After Edge Is Detected May Clear Interrupt Status */ +/* Flag Data Register Writes One SCLK Cycle after Edge Is Detected May Clear Interrupt Status */ #define ANOMALY_05000333 (__SILICON_REVISION__ < 5) -/* New Feature: Additional PPI Frame Sync Sampling Options (Not Available on Older Silicon) */ +/* ALT_TIMING Bit in PLL_CTL Register Is Not Functional */ #define ANOMALY_05000339 (__SILICON_REVISION__ < 5) /* Memory DMA FIFO Causes Throughput Degradation on Writes to External Memory */ #define ANOMALY_05000343 (__SILICON_REVISION__ < 5) @@ -276,7 +276,7 @@ #define ANOMALY_05000428 (__SILICON_REVISION__ > 3) /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */ #define ANOMALY_05000443 (1) -/* False Hardware Error when RETI points to invalid memory */ +/* False Hardware Error when RETI Points to Invalid Memory */ #define ANOMALY_05000461 (1) /* Anomalies that don't exist on this proc */ @@ -284,6 +284,7 @@ #define ANOMALY_05000158 (0) #define ANOMALY_05000183 (0) #define ANOMALY_05000233 (0) +#define ANOMALY_05000234 (0) #define ANOMALY_05000273 (0) #define ANOMALY_05000311 (0) #define ANOMALY_05000353 (1) @@ -298,5 +299,7 @@ #define ANOMALY_05000448 (0) #define ANOMALY_05000456 (0) #define ANOMALY_05000450 (0) +#define ANOMALY_05000465 (0) +#define ANOMALY_05000467 (0) #endif -- cgit v1.1 From 26579216f3cdf1ae05f0af8412b444870a167510 Mon Sep 17 00:00:00 2001 From: Mike Frysinger <vapier@gentoo.org> Date: Mon, 15 Jun 2009 06:10:03 -0400 Subject: Blackfin: redo handling of bad irqs With the common IRQ code initializing much more of the irq_desc state, we can't blindly initialize it ourselves to the local bad_irq state. If we do, we end up wrongly clobbering many fields. So punt most of the bad irq code as the common layers will handle the default state, and simply call handle_bad_irq() directly when the IRQ we are processing is invalid. Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- arch/blackfin/kernel/irqchip.c | 53 +++++++++--------------------------------- 1 file changed, 11 insertions(+), 42 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/kernel/irqchip.c b/arch/blackfin/kernel/irqchip.c index 6e31e93..36bba30 100644 --- a/arch/blackfin/kernel/irqchip.c +++ b/arch/blackfin/kernel/irqchip.c @@ -38,38 +38,15 @@ #include <asm/pda.h> static atomic_t irq_err_count; -static spinlock_t irq_controller_lock; - -/* - * Dummy mask/unmask handler - */ -void dummy_mask_unmask_irq(unsigned int irq) -{ -} - void ack_bad_irq(unsigned int irq) { atomic_inc(&irq_err_count); printk(KERN_ERR "IRQ: spurious interrupt %d\n", irq); } -static struct irq_chip bad_chip = { - .ack = dummy_mask_unmask_irq, - .mask = dummy_mask_unmask_irq, - .unmask = dummy_mask_unmask_irq, -}; - -static int bad_stats; static struct irq_desc bad_irq_desc = { - .status = IRQ_DISABLED, - .chip = &bad_chip, .handle_irq = handle_bad_irq, - .depth = 1, .lock = __SPIN_LOCK_UNLOCKED(irq_desc->lock), - .kstat_irqs = &bad_stats, -#ifdef CONFIG_SMP - .affinity = CPU_MASK_ALL -#endif }; #ifdef CONFIG_CPUMASK_OFFSTACK @@ -119,21 +96,13 @@ __attribute__((l1_text)) #endif asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs) { - struct pt_regs *old_regs; - struct irq_desc *desc = irq_desc + irq; #ifndef CONFIG_IPIPE unsigned short pending, other_ints; #endif - old_regs = set_irq_regs(regs); - - /* - * Some hardware gives randomly wrong interrupts. Rather - * than crashing, do something sensible. - */ - if (irq >= NR_IRQS) - desc = &bad_irq_desc; + struct pt_regs *old_regs = set_irq_regs(regs); irq_enter(); + #ifdef CONFIG_DEBUG_STACKOVERFLOW /* Debugging check for stack overflow: is there less than STACK_WARN free? */ { @@ -149,7 +118,15 @@ asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs) } } #endif - generic_handle_irq(irq); + + /* + * Some hardware gives randomly wrong interrupts. Rather + * than crashing, do something sensible. + */ + if (irq >= NR_IRQS) + handle_bad_irq(irq, &bad_irq_desc); + else + generic_handle_irq(irq); #ifndef CONFIG_IPIPE /* @@ -173,14 +150,6 @@ asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs) void __init init_IRQ(void) { - struct irq_desc *desc; - int irq; - - spin_lock_init(&irq_controller_lock); - for (irq = 0, desc = irq_desc; irq < NR_IRQS; irq++, desc++) { - *desc = bad_irq_desc; - } - init_arch_irq(); #ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND -- cgit v1.1 From 46f288a0f983401ebadb918751d342cbf819cde5 Mon Sep 17 00:00:00 2001 From: Mike Frysinger <vapier@gentoo.org> Date: Mon, 15 Jun 2009 06:13:58 -0400 Subject: Blackfin: only build show_interrupts() when procfs is enabled Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- arch/blackfin/kernel/irqchip.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/blackfin/kernel/irqchip.c b/arch/blackfin/kernel/irqchip.c index 36bba30..8abb642 100644 --- a/arch/blackfin/kernel/irqchip.c +++ b/arch/blackfin/kernel/irqchip.c @@ -54,6 +54,7 @@ static struct irq_desc bad_irq_desc = { #error "Blackfin architecture does not support CONFIG_CPUMASK_OFFSTACK." #endif +#ifdef CONFIG_PROC_FS int show_interrupts(struct seq_file *p, void *v) { int i = *(loff_t *) v, j; @@ -85,6 +86,7 @@ int show_interrupts(struct seq_file *p, void *v) } return 0; } +#endif /* * do_IRQ handles all hardware IRQs. Decoded IRQs should not -- cgit v1.1 From 6f10fdabdce356aac3c948e659f39b6f1e2f7382 Mon Sep 17 00:00:00 2001 From: Mike Frysinger <vapier@gentoo.org> Date: Mon, 15 Jun 2009 06:18:38 -0400 Subject: Blackfin: simplify irq stack overflow checking Take a page from x86 and abstract the stack checking out of the asm_do_IRQ() function so that the result is easier to digest. Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- arch/blackfin/kernel/irqchip.c | 32 +++++++++++++++++--------------- 1 file changed, 17 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/kernel/irqchip.c b/arch/blackfin/kernel/irqchip.c index 8abb642..7378440 100644 --- a/arch/blackfin/kernel/irqchip.c +++ b/arch/blackfin/kernel/irqchip.c @@ -88,6 +88,22 @@ int show_interrupts(struct seq_file *p, void *v) } #endif +#ifdef CONFIG_DEBUG_STACKOVERFLOW +static void check_stack_overflow(int irq) +{ + /* Debugging check for stack overflow: is there less than STACK_WARN free? */ + long sp = __get_SP() & (THREAD_SIZE - 1); + + if (unlikely(sp < (sizeof(struct thread_info) + STACK_WARN))) { + dump_stack(); + pr_emerg("irq%i: possible stack overflow only %ld bytes free\n", + irq, sp - sizeof(struct thread_info)); + } +} +#else +static inline void check_stack_overflow(int irq) { } +#endif + /* * do_IRQ handles all hardware IRQs. Decoded IRQs should not * come via this function. Instead, they should provide their @@ -105,21 +121,7 @@ asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs) irq_enter(); -#ifdef CONFIG_DEBUG_STACKOVERFLOW - /* Debugging check for stack overflow: is there less than STACK_WARN free? */ - { - long sp; - - sp = __get_SP() & (THREAD_SIZE-1); - - if (unlikely(sp < (sizeof(struct thread_info) + STACK_WARN))) { - dump_stack(); - printk(KERN_EMERG "%s: possible stack overflow while handling irq %i " - " only %ld bytes free\n", - __func__, irq, sp - sizeof(struct thread_info)); - } - } -#endif + check_stack_overflow(irq); /* * Some hardware gives randomly wrong interrupts. Rather -- cgit v1.1 From 81b79c213d0200fdd16951a9fb18748fd511d810 Mon Sep 17 00:00:00 2001 From: Mike Frysinger <vapier@gentoo.org> Date: Mon, 15 Jun 2009 06:22:08 -0400 Subject: Blackfin: abstract irq14 lowering in do_irq Split out the optional IRQ14 lowering code to further simplify the asm_do_IRQ() function and keep the ifdef nest under control. Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- arch/blackfin/kernel/irqchip.c | 43 ++++++++++++++++++++++++------------------ 1 file changed, 25 insertions(+), 18 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/kernel/irqchip.c b/arch/blackfin/kernel/irqchip.c index 7378440..4b5fd36 100644 --- a/arch/blackfin/kernel/irqchip.c +++ b/arch/blackfin/kernel/irqchip.c @@ -104,6 +104,29 @@ static void check_stack_overflow(int irq) static inline void check_stack_overflow(int irq) { } #endif +#ifndef CONFIG_IPIPE +static void maybe_lower_to_irq14(void) +{ + unsigned short pending, other_ints; + + /* + * If we're the only interrupt running (ignoring IRQ15 which + * is for syscalls), lower our priority to IRQ14 so that + * softirqs run at that level. If there's another, + * lower-level interrupt, irq_exit will defer softirqs to + * that. If the interrupt pipeline is enabled, we are already + * running at IRQ14 priority, so we don't need this code. + */ + CSYNC(); + pending = bfin_read_IPEND() & ~0x8000; + other_ints = pending & (pending - 1); + if (other_ints == 0) + lower_to_irq14(); +} +#else +static inline void maybe_lower_to_irq14(void) { } +#endif + /* * do_IRQ handles all hardware IRQs. Decoded IRQs should not * come via this function. Instead, they should provide their @@ -114,9 +137,6 @@ __attribute__((l1_text)) #endif asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs) { -#ifndef CONFIG_IPIPE - unsigned short pending, other_ints; -#endif struct pt_regs *old_regs = set_irq_regs(regs); irq_enter(); @@ -132,21 +152,8 @@ asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs) else generic_handle_irq(irq); -#ifndef CONFIG_IPIPE - /* - * If we're the only interrupt running (ignoring IRQ15 which - * is for syscalls), lower our priority to IRQ14 so that - * softirqs run at that level. If there's another, - * lower-level interrupt, irq_exit will defer softirqs to - * that. If the interrupt pipeline is enabled, we are already - * running at IRQ14 priority, so we don't need this code. - */ - CSYNC(); - pending = bfin_read_IPEND() & ~0x8000; - other_ints = pending & (pending - 1); - if (other_ints == 0) - lower_to_irq14(); -#endif /* !CONFIG_IPIPE */ + maybe_lower_to_irq14(); + irq_exit(); set_irq_regs(old_regs); -- cgit v1.1 From 0de4adfb8c9674fa1572b0ff1371acc94b0be901 Mon Sep 17 00:00:00 2001 From: Sonic Zhang <sonic.zhang@analog.com> Date: Mon, 15 Jun 2009 07:39:19 +0000 Subject: Blackfin: fix accidental reset in some boot modes We read the SWRST (Software Reset) register to get at the last reset state, and then we may configure the DOUBLE_FAULT bit to control behavior when a double fault occurs. But if the lower bits of the register is already set (like UART boot mode on a BF54x), we inadvertently make the system reset by writing to the SYSTEM_RESET field at the same time. So make sure the lower 4 bits are always cleared. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- arch/blackfin/kernel/setup.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index 6454bab..b2782ea 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -837,7 +837,8 @@ void __init setup_arch(char **cmdline_p) defined(CONFIG_BF538) || defined(CONFIG_BF539) _bfin_swrst = bfin_read_SWRST(); #else - _bfin_swrst = bfin_read_SYSCR(); + /* Clear boot mode field */ + _bfin_swrst = bfin_read_SYSCR() & ~0xf; #endif #ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT -- cgit v1.1 From dc2c46bb702629d20a3786e10b540c7dcf2c017f Mon Sep 17 00:00:00 2001 From: Graf Yang <graf.yang@analog.com> Date: Mon, 15 Jun 2009 08:23:41 +0000 Subject: Blackfin: bf526-ezbrd: set SPI flash resources to SST device The BF526-EZBRD has a SST SPI flash on it, not a ST Micro. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- arch/blackfin/mach-bf527/boards/ezbrd.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c index 9f9c000..b2f30f0 100644 --- a/arch/blackfin/mach-bf527/boards/ezbrd.c +++ b/arch/blackfin/mach-bf527/boards/ezbrd.c @@ -237,10 +237,10 @@ static struct flash_platform_data bfin_spi_flash_data = { .name = "m25p80", .parts = bfin_spi_flash_partitions, .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions), - .type = "m25p16", + .type = "sst25wf040", }; -/* SPI flash chip (m25p64) */ +/* SPI flash chip (sst25wf040) */ static struct bfin5xx_spi_chip spi_flash_chip_info = { .enable_dma = 0, /* use dma transfer with this chip*/ .bits_per_word = 8, -- cgit v1.1 From 3d15f302d089d0583463745cbece077c1e8294b1 Mon Sep 17 00:00:00 2001 From: Mike Frysinger <vapier@gentoo.org> Date: Mon, 15 Jun 2009 16:21:44 +0000 Subject: Blackfin: allow people to select BF51x-0.1 silicon rev Now that 0.1 of the BF51x is coming out, allow people to build for it. Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- arch/blackfin/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index 8ea0d94..c2c4a62 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -274,7 +274,7 @@ config BF_REV_0_0 config BF_REV_0_1 bool "0.1" - depends on (BF52x || (BF54x && !BF54xM)) + depends on (BF51x || BF52x || (BF54x && !BF54xM)) config BF_REV_0_2 bool "0.2" -- cgit v1.1 From 06ecc190f3928850cb77c498f745fc8e9a7e2fd7 Mon Sep 17 00:00:00 2001 From: Philippe Gerum <rpm@xenomai.org> Date: Tue, 16 Jun 2009 05:25:37 +0200 Subject: Blackfin: convert interrupt pipeline to irqflags Signed-off-by: Philippe Gerum <rpm@xenomai.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- arch/blackfin/include/asm/ipipe_base.h | 30 +++--- arch/blackfin/include/asm/irq.h | 7 -- arch/blackfin/include/asm/irqflags.h | 164 +++++++++++++++++++++++++++++++-- arch/blackfin/include/asm/system.h | 4 +- arch/blackfin/kernel/ipipe.c | 2 +- 5 files changed, 177 insertions(+), 30 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/include/asm/ipipe_base.h b/arch/blackfin/include/asm/ipipe_base.h index 3e8acbd..490098f 100644 --- a/arch/blackfin/include/asm/ipipe_base.h +++ b/arch/blackfin/include/asm/ipipe_base.h @@ -51,23 +51,23 @@ extern unsigned long __ipipe_root_status; /* Alias to ipipe_root_cpudom_var(status) */ -static inline void __ipipe_stall_root(void) -{ - volatile unsigned long *p = &__ipipe_root_status; - set_bit(0, p); -} +#define __ipipe_stall_root() \ + do { \ + volatile unsigned long *p = &__ipipe_root_status; \ + set_bit(0, p); \ + } while (0) -static inline unsigned long __ipipe_test_and_stall_root(void) -{ - volatile unsigned long *p = &__ipipe_root_status; - return test_and_set_bit(0, p); -} +#define __ipipe_test_and_stall_root() \ + ({ \ + volatile unsigned long *p = &__ipipe_root_status; \ + test_and_set_bit(0, p); \ + }) -static inline unsigned long __ipipe_test_root(void) -{ - const unsigned long *p = &__ipipe_root_status; - return test_bit(0, p); -} +#define __ipipe_test_root() \ + ({ \ + const unsigned long *p = &__ipipe_root_status; \ + test_bit(0, p); \ + }) #endif /* !__ASSEMBLY__ */ diff --git a/arch/blackfin/include/asm/irq.h b/arch/blackfin/include/asm/irq.h index 9a7f63a..42a15f5 100644 --- a/arch/blackfin/include/asm/irq.h +++ b/arch/blackfin/include/asm/irq.h @@ -22,13 +22,6 @@ /* SYS_IRQS and NR_IRQS are defined in <mach-bf5xx/irq.h> */ #include <mach/irq.h> -/* Xenomai IPIPE helpers */ -#define local_irq_restore_hw(x) local_irq_restore(x) -#define local_irq_save_hw(x) local_irq_save(x) -#define local_irq_enable_hw(x) local_irq_enable(x) -#define local_irq_disable_hw(x) local_irq_disable(x) -#define irqs_disabled_hw(x) irqs_disabled(x) - #if ANOMALY_05000244 && defined(CONFIG_BFIN_ICACHE) # define NOP_PAD_ANOMALY_05000244 "nop; nop;" #else diff --git a/arch/blackfin/include/asm/irqflags.h b/arch/blackfin/include/asm/irqflags.h index 139cba4..9b19a19 100644 --- a/arch/blackfin/include/asm/irqflags.h +++ b/arch/blackfin/include/asm/irqflags.h @@ -31,6 +31,150 @@ static inline unsigned long bfin_cli(void) return flags; } +#ifdef CONFIG_IPIPE + +#include <linux/ipipe_base.h> +#include <linux/ipipe_trace.h> + +#ifdef CONFIG_DEBUG_HWERR +# define bfin_no_irqs 0x3f +#else +# define bfin_no_irqs 0x1f +#endif + +#define raw_local_irq_disable() \ + do { \ + ipipe_check_context(ipipe_root_domain); \ + __ipipe_stall_root(); \ + barrier(); \ + } while (0) + +static inline void raw_local_irq_enable(void) +{ + barrier(); + ipipe_check_context(ipipe_root_domain); + __ipipe_unstall_root(); +} + +#define raw_local_save_flags_ptr(x) \ + do { \ + *(x) = __ipipe_test_root() ? bfin_no_irqs : bfin_irq_flags; \ + } while (0) + +#define raw_local_save_flags(x) raw_local_save_flags_ptr(&(x)) + +#define raw_irqs_disabled_flags(x) ((x) == bfin_no_irqs) + +#define raw_local_irq_save_ptr(x) \ + do { \ + *(x) = __ipipe_test_and_stall_root() ? bfin_no_irqs : bfin_irq_flags; \ + barrier(); \ + } while (0) + +#define raw_local_irq_save(x) \ + do { \ + ipipe_check_context(ipipe_root_domain); \ + raw_local_irq_save_ptr(&(x)); \ + } while (0) + +static inline unsigned long raw_mangle_irq_bits(int virt, unsigned long real) +{ + /* + * Merge virtual and real interrupt mask bits into a single + * 32bit word. + */ + return (real & ~(1 << 31)) | ((virt != 0) << 31); +} + +static inline int raw_demangle_irq_bits(unsigned long *x) +{ + int virt = (*x & (1 << 31)) != 0; + *x &= ~(1L << 31); + return virt; +} + +static inline void local_irq_disable_hw_notrace(void) +{ + bfin_cli(); +} + +static inline void local_irq_enable_hw_notrace(void) +{ + bfin_sti(bfin_irq_flags); +} + +#define local_save_flags_hw(flags) \ + do { \ + (flags) = bfin_read_IMASK(); \ + } while (0) + +#define irqs_disabled_flags_hw(flags) (((flags) & ~0x3f) == 0) + +#define irqs_disabled_hw() \ + ({ \ + unsigned long flags; \ + local_save_flags_hw(flags); \ + irqs_disabled_flags_hw(flags); \ + }) + +static inline void local_irq_save_ptr_hw(unsigned long *flags) +{ + *flags = bfin_cli(); +#ifdef CONFIG_DEBUG_HWERR + bfin_sti(0x3f); +#endif +} + +#define local_irq_save_hw_notrace(flags) \ + do { \ + local_irq_save_ptr_hw(&(flags)); \ + } while (0) + +static inline void local_irq_restore_hw_notrace(unsigned long flags) +{ + if (!irqs_disabled_flags_hw(flags)) + local_irq_enable_hw_notrace(); +} + +#ifdef CONFIG_IPIPE_TRACE_IRQSOFF +# define local_irq_disable_hw() \ + do { \ + if (!irqs_disabled_hw()) { \ + local_irq_disable_hw_notrace(); \ + ipipe_trace_begin(0x80000000); \ + } \ + } while (0) +# define local_irq_enable_hw() \ + do { \ + if (irqs_disabled_hw()) { \ + ipipe_trace_end(0x80000000); \ + local_irq_enable_hw_notrace(); \ + } \ + } while (0) +# define local_irq_save_hw(flags) \ + do { \ + local_save_flags_hw(flags); \ + if (!irqs_disabled_flags_hw(flags)) { \ + local_irq_disable_hw_notrace(); \ + ipipe_trace_begin(0x80000001); \ + } \ + } while (0) +# define local_irq_restore_hw(flags) \ + do { \ + if (!irqs_disabled_flags_hw(flags)) { \ + ipipe_trace_end(0x80000001); \ + local_irq_enable_hw_notrace(); \ + } \ + } while (0) +#else /* !CONFIG_IPIPE_TRACE_IRQSOFF */ +# define local_irq_disable_hw() local_irq_disable_hw_notrace() +# define local_irq_enable_hw() local_irq_enable_hw_notrace() +# define local_irq_save_hw(flags) local_irq_save_hw_notrace(flags) +# define local_irq_restore_hw(flags) local_irq_restore_hw_notrace(flags) +#endif /* !CONFIG_IPIPE_TRACE_IRQSOFF */ + +#else /* CONFIG_IPIPE */ + static inline void raw_local_irq_disable(void) { bfin_cli(); @@ -44,12 +188,6 @@ static inline void raw_local_irq_enable(void) #define raw_irqs_disabled_flags(flags) (((flags) & ~0x3f) == 0) -static inline void raw_local_irq_restore(unsigned long flags) -{ - if (!raw_irqs_disabled_flags(flags)) - raw_local_irq_enable(); -} - static inline unsigned long __raw_local_irq_save(void) { unsigned long flags = bfin_cli(); @@ -60,4 +198,18 @@ static inline unsigned long __raw_local_irq_save(void) } #define raw_local_irq_save(flags) do { (flags) = __raw_local_irq_save(); } while (0) +#define local_irq_save_hw(flags) raw_local_irq_save(flags) +#define local_irq_restore_hw(flags) raw_local_irq_restore(flags) +#define local_irq_enable_hw() raw_local_irq_enable() +#define local_irq_disable_hw() raw_local_irq_disable() +#define irqs_disabled_hw() irqs_disabled() + +#endif /* !CONFIG_IPIPE */ + +static inline void raw_local_irq_restore(unsigned long flags) +{ + if (!raw_irqs_disabled_flags(flags)) + raw_local_irq_enable(); +} + #endif diff --git a/arch/blackfin/include/asm/system.h b/arch/blackfin/include/asm/system.h index 294dbda..85e8f16 100644 --- a/arch/blackfin/include/asm/system.h +++ b/arch/blackfin/include/asm/system.h @@ -135,11 +135,13 @@ struct __xchg_dummy { }; #define __xg(x) ((volatile struct __xchg_dummy *)(x)) +#include <mach/blackfin.h> + static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size) { unsigned long tmp = 0; - unsigned long flags = 0; + unsigned long flags; local_irq_save_hw(flags); diff --git a/arch/blackfin/kernel/ipipe.c b/arch/blackfin/kernel/ipipe.c index d8cde1f..2b979ed 100644 --- a/arch/blackfin/kernel/ipipe.c +++ b/arch/blackfin/kernel/ipipe.c @@ -52,7 +52,7 @@ EXPORT_SYMBOL(__ipipe_freq_scale); atomic_t __ipipe_irq_lvdepth[IVG15 + 1]; -unsigned long __ipipe_irq_lvmask = __all_masked_irq_flags; +unsigned long __ipipe_irq_lvmask = bfin_no_irqs; EXPORT_SYMBOL(__ipipe_irq_lvmask); static void __ipipe_ack_irq(unsigned irq, struct irq_desc *desc) -- cgit v1.1 From a40494a62a11dbaf326397aa94b2018ead09884d Mon Sep 17 00:00:00 2001 From: Philippe Gerum <rpm@xenomai.org> Date: Tue, 16 Jun 2009 05:25:42 +0200 Subject: Blackfin: allow CONFIG_TICKSOURCE_GPTMR0 with interrupt pipeline Signed-off-by: Philippe Gerum <rpm@xenomai.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- arch/blackfin/Kconfig | 1 - arch/blackfin/include/asm/ipipe.h | 7 ++++- arch/blackfin/mach-common/ints-priority.c | 47 +++++++++++++++---------------- 3 files changed, 28 insertions(+), 27 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index c2c4a62..8140a2f 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -623,7 +623,6 @@ choice config TICKSOURCE_GPTMR0 bool "Gptimer0 (SCLK domain)" select BFIN_GPTIMERS - depends on !IPIPE config TICKSOURCE_CORETMR bool "Core timer (CCLK domain)" diff --git a/arch/blackfin/include/asm/ipipe.h b/arch/blackfin/include/asm/ipipe.h index bbe1c37..ffa5e60 100644 --- a/arch/blackfin/include/asm/ipipe.h +++ b/arch/blackfin/include/asm/ipipe.h @@ -207,7 +207,7 @@ void ipipe_init_irq_threads(void); int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc); -#ifdef CONFIG_GENERIC_CLOCKEVENTS +#ifdef CONFIG_TICKSOURCE_CORETMR #define IRQ_SYSTMR IRQ_CORETMR #define IRQ_PRIOTMR IRQ_CORETMR #else @@ -240,8 +240,13 @@ int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc); #define ipipe_init_irq_threads() do { } while (0) #define ipipe_start_irq_thread(irq, desc) 0 +#ifndef CONFIG_TICKSOURCE_GPTMR0 #define IRQ_SYSTMR IRQ_CORETMR #define IRQ_PRIOTMR IRQ_CORETMR +#else +#define IRQ_SYSTMR IRQ_TIMER0 +#define IRQ_PRIOTMR CONFIG_IRQ_TIMER0 +#endif #define __ipipe_root_tick_p(regs) 1 diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c index af70f09..b421501 100644 --- a/arch/blackfin/mach-common/ints-priority.c +++ b/arch/blackfin/mach-common/ints-priority.c @@ -1052,35 +1052,34 @@ int __init init_arch_irq(void) set_irq_chained_handler(irq, bfin_demux_error_irq); break; #endif -#if defined(CONFIG_TICKSOURCE_GPTMR0) - case IRQ_TIMER0: - set_irq_handler(irq, handle_percpu_irq); - break; -#endif #ifdef CONFIG_SMP case IRQ_SUPPLE_0: case IRQ_SUPPLE_1: set_irq_handler(irq, handle_percpu_irq); break; #endif - default: #ifdef CONFIG_IPIPE - /* - * We want internal interrupt sources to be - * masked, because ISRs may trigger interrupts - * recursively (e.g. DMA), but interrupts are - * _not_ masked at CPU level. So let's handle - * most of them as level interrupts, except - * the timer interrupt which is special. - */ - if (irq == IRQ_SYSTMR || irq == IRQ_CORETMR) - set_irq_handler(irq, handle_simple_irq); - else - set_irq_handler(irq, handle_level_irq); +#ifndef CONFIG_TICKSOURCE_CORETMR + case IRQ_TIMER0: + set_irq_handler(irq, handle_simple_irq); + break; +#endif /* !CONFIG_TICKSOURCE_CORETMR */ + case IRQ_CORETMR: + set_irq_handler(irq, handle_simple_irq); + break; + default: + set_irq_handler(irq, handle_level_irq); + break; #else /* !CONFIG_IPIPE */ +#ifdef CONFIG_TICKSOURCE_GPTMR0 + case IRQ_TIMER0: + set_irq_handler(irq, handle_percpu_irq); + break; +#endif /* CONFIG_TICKSOURCE_GPTMR0 */ + default: set_irq_handler(irq, handle_simple_irq); -#endif /* !CONFIG_IPIPE */ break; +#endif /* !CONFIG_IPIPE */ } } @@ -1224,15 +1223,14 @@ __attribute__((l1_text)) asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs) { struct ipipe_percpu_domain_data *p = ipipe_root_cpudom_ptr(); - struct ipipe_domain *this_domain = ipipe_current_domain; + struct ipipe_domain *this_domain = __ipipe_current_domain; struct ivgx *ivg_stop = ivg7_13[vec-IVG7].istop; struct ivgx *ivg = ivg7_13[vec-IVG7].ifirst; int irq, s; - if (likely(vec == EVT_IVTMR_P)) { + if (likely(vec == EVT_IVTMR_P)) irq = IRQ_CORETMR; - - } else { + else { #if defined(SIC_ISR0) || defined(SICA_ISR0) unsigned long sic_status[3]; @@ -1262,12 +1260,11 @@ asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs) break; } #endif - irq = ivg->irqno; } if (irq == IRQ_SYSTMR) { -#ifndef CONFIG_GENERIC_CLOCKEVENTS +#if !defined(CONFIG_GENERIC_CLOCKEVENTS) || defined(CONFIG_TICKSOURCE_GPTMR0) bfin_write_TIMER_STATUS(1); /* Latch TIMIL0 */ #endif /* This is basically what we need from the register frame. */ -- cgit v1.1 From 5ba3b249c9e08100b0822f17276348b3447d6ee3 Mon Sep 17 00:00:00 2001 From: Philippe Gerum <rpm@xenomai.org> Date: Tue, 16 Jun 2009 05:25:50 +0200 Subject: Blackfin: remove obsolete mcount support from I-pipe code Signed-off-by: Philippe Gerum <rpm@xenomai.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- arch/blackfin/kernel/Makefile | 1 - arch/blackfin/kernel/ipipe.c | 5 ---- arch/blackfin/kernel/mcount.S | 70 ------------------------------------------- 3 files changed, 76 deletions(-) delete mode 100644 arch/blackfin/kernel/mcount.S (limited to 'arch') diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile index 3731088..141d928 100644 --- a/arch/blackfin/kernel/Makefile +++ b/arch/blackfin/kernel/Makefile @@ -20,7 +20,6 @@ obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o CFLAGS_REMOVE_ftrace.o = -pg obj-$(CONFIG_IPIPE) += ipipe.o -obj-$(CONFIG_IPIPE_TRACE_MCOUNT) += mcount.o obj-$(CONFIG_BFIN_GPTIMERS) += gptimers.o obj-$(CONFIG_CPLB_INFO) += cplbinfo.o obj-$(CONFIG_MODULES) += module.o diff --git a/arch/blackfin/kernel/ipipe.c b/arch/blackfin/kernel/ipipe.c index 2b979ed..b8d2203 100644 --- a/arch/blackfin/kernel/ipipe.c +++ b/arch/blackfin/kernel/ipipe.c @@ -342,8 +342,3 @@ void ___ipipe_sync_pipeline(unsigned long syncmask) } EXPORT_SYMBOL(show_stack); - -#ifdef CONFIG_IPIPE_TRACE_MCOUNT -void notrace _mcount(void); -EXPORT_SYMBOL(_mcount); -#endif /* CONFIG_IPIPE_TRACE_MCOUNT */ diff --git a/arch/blackfin/kernel/mcount.S b/arch/blackfin/kernel/mcount.S deleted file mode 100644 index edcfb38..0000000 --- a/arch/blackfin/kernel/mcount.S +++ /dev/null @@ -1,70 +0,0 @@ -/* - * linux/arch/blackfin/mcount.S - * - * Copyright (C) 2006 Analog Devices Inc. - * - * 2007/04/12 Save index, length, modify and base registers. --rpm - */ - -#include <linux/linkage.h> -#include <asm/blackfin.h> - -.text - -.align 4 /* just in case */ - -ENTRY(__mcount) - [--sp] = i0; - [--sp] = i1; - [--sp] = i2; - [--sp] = i3; - [--sp] = l0; - [--sp] = l1; - [--sp] = l2; - [--sp] = l3; - [--sp] = m0; - [--sp] = m1; - [--sp] = m2; - [--sp] = m3; - [--sp] = b0; - [--sp] = b1; - [--sp] = b2; - [--sp] = b3; - [--sp] = ( r7:0, p5:0 ); - [--sp] = ASTAT; - - p1.L = _ipipe_trace_enable; - p1.H = _ipipe_trace_enable; - r7 = [p1]; - CC = r7 == 0; - if CC jump out; - link 0x10; - r0 = 0x0; - [sp + 0xc] = r0; /* v */ - r0 = 0x0; /* type: IPIPE_TRACE_FN */ - r1 = rets; - p0 = [fp]; /* p0: Prior FP */ - r2 = [p0 + 4]; /* r2: Prior RETS */ - call ___ipipe_trace; - unlink; -out: - ASTAT = [sp++]; - ( r7:0, p5:0 ) = [sp++]; - b3 = [sp++]; - b2 = [sp++]; - b1 = [sp++]; - b0 = [sp++]; - m3 = [sp++]; - m2 = [sp++]; - m1 = [sp++]; - m0 = [sp++]; - l3 = [sp++]; - l2 = [sp++]; - l1 = [sp++]; - l0 = [sp++]; - i3 = [sp++]; - i2 = [sp++]; - i1 = [sp++]; - i0 = [sp++]; - rts; -ENDPROC(__mcount) -- cgit v1.1 From 7c039a90f02c3fdcab8d3ca170c05ad37014189e Mon Sep 17 00:00:00 2001 From: Philippe Gerum <rpm@xenomai.org> Date: Tue, 16 Jun 2009 05:25:54 +0200 Subject: Blackfin: update I-pipe patch level Signed-off-by: Philippe Gerum <rpm@xenomai.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- arch/blackfin/include/asm/ipipe.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/include/asm/ipipe.h b/arch/blackfin/include/asm/ipipe.h index ffa5e60..87ba9ad 100644 --- a/arch/blackfin/include/asm/ipipe.h +++ b/arch/blackfin/include/asm/ipipe.h @@ -35,9 +35,9 @@ #include <asm/atomic.h> #include <asm/traps.h> -#define IPIPE_ARCH_STRING "1.10-00" +#define IPIPE_ARCH_STRING "1.11-00" #define IPIPE_MAJOR_NUMBER 1 -#define IPIPE_MINOR_NUMBER 10 +#define IPIPE_MINOR_NUMBER 11 #define IPIPE_PATCH_NUMBER 0 #ifdef CONFIG_SMP -- cgit v1.1 From 41ba653f24a39a0e6a4afe9b2763a95a57e042c2 Mon Sep 17 00:00:00 2001 From: Jie Zhang <jie.zhang@analog.com> Date: Tue, 16 Jun 2009 09:48:33 +0000 Subject: Blackfin: decouple unrelated cache settings to get exact behavior The current cache options don't really represent the hardware features. They end up setting different aspects of the hardware so that the end result is to turn on/off the cache. Unfortunately, when we hit cache problems with the hardware, it's difficult to test different settings to root cause the problem. The current settings also don't cleanly allow for different caching behaviors with different regions of memory. So split the configure options such that they properly reflect the settings that are applied to the hardware. Signed-off-by: Jie Zhang <jie.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- arch/blackfin/Kconfig | 57 +++++++++++++------ arch/blackfin/include/asm/cache.h | 4 +- arch/blackfin/include/asm/cacheflush.h | 10 ++-- arch/blackfin/include/asm/cplb.h | 32 ++++++----- arch/blackfin/kernel/cplb-mpu/cplbinit.c | 10 ++-- arch/blackfin/kernel/cplb-mpu/cplbmgr.c | 36 ++++++++---- arch/blackfin/kernel/setup.c | 96 ++++++++++++++++++++++++++------ arch/blackfin/mach-common/arch_checks.c | 4 +- arch/blackfin/mach-common/cpufreq.c | 2 +- arch/blackfin/mach-common/pm.c | 4 +- arch/blackfin/mm/init.c | 2 +- 11 files changed, 176 insertions(+), 81 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index 8140a2f..220635a 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -907,23 +907,41 @@ endchoice comment "Cache Support" + config BFIN_ICACHE bool "Enable ICACHE" + default y +config BFIN_ICACHE_LOCK + bool "Enable Instruction Cache Locking" + depends on BFIN_ICACHE + default n +config BFIN_EXTMEM_ICACHEABLE + bool "Enable ICACHE for external memory" + depends on BFIN_ICACHE + default y +config BFIN_L2_ICACHEABLE + bool "Enable ICACHE for L2 SRAM" + depends on BFIN_ICACHE + depends on BF54x || BF561 + default n + config BFIN_DCACHE bool "Enable DCACHE" + default y config BFIN_DCACHE_BANKA bool "Enable only 16k BankA DCACHE - BankB is SRAM" depends on BFIN_DCACHE && !BF531 default n -config BFIN_ICACHE_LOCK - bool "Enable Instruction Cache Locking" - -choice - prompt "External memory cache policy" +config BFIN_EXTMEM_DCACHEABLE + bool "Enable DCACHE for external memory" depends on BFIN_DCACHE - default BFIN_WB if !SMP - default BFIN_WT if SMP -config BFIN_WB + default y +choice + prompt "External memory DCACHE policy" + depends on BFIN_EXTMEM_DCACHEABLE + default BFIN_EXTMEM_WRITEBACK if !SMP + default BFIN_EXTMEM_WRITETHROUGH if SMP +config BFIN_EXTMEM_WRITEBACK bool "Write back" depends on !SMP help @@ -941,7 +959,7 @@ config BFIN_WB If you are unsure of the options and you want to be safe, then go with Write Through. -config BFIN_WT +config BFIN_EXTMEM_WRITETHROUGH bool "Write through" help Write Back Policy: @@ -960,23 +978,26 @@ config BFIN_WT endchoice +config BFIN_L2_DCACHEABLE + bool "Enable DCACHE for L2 SRAM" + depends on BFIN_DCACHE + depends on BF54x || BF561 + default n choice - prompt "L2 SRAM cache policy" - depends on (BF54x || BF561) - default BFIN_L2_WT -config BFIN_L2_WB + prompt "L2 SRAM DCACHE policy" + depends on BFIN_L2_DCACHEABLE + default BFIN_L2_WRITEBACK +config BFIN_L2_WRITEBACK bool "Write back" depends on !SMP -config BFIN_L2_WT +config BFIN_L2_WRITETHROUGH bool "Write through" depends on !SMP - -config BFIN_L2_NOT_CACHED - bool "Not cached" - endchoice + +comment "Memory Protection Unit" config MPU bool "Enable the memory protection unit (EXPERIMENTAL)" default n diff --git a/arch/blackfin/include/asm/cache.h b/arch/blackfin/include/asm/cache.h index 2ef669e..477050a 100644 --- a/arch/blackfin/include/asm/cache.h +++ b/arch/blackfin/include/asm/cache.h @@ -35,10 +35,10 @@ #if defined(CONFIG_SMP) && \ !defined(CONFIG_BFIN_CACHE_COHERENT) -# if defined(CONFIG_BFIN_ICACHE) +# if defined(CONFIG_BFIN_ICACHEABLE) || defined(CONFIG_BFIN_L2_ICACHEABLE) # define __ARCH_SYNC_CORE_ICACHE # endif -# if defined(CONFIG_BFIN_DCACHE) +# if defined(CONFIG_BFIN_DCACHEABLE) || defined(CONFIG_BFIN_L2_DCACHEABLE) # define __ARCH_SYNC_CORE_DCACHE # endif #ifndef __ASSEMBLY__ diff --git a/arch/blackfin/include/asm/cacheflush.h b/arch/blackfin/include/asm/cacheflush.h index 5c17dee..7e55549e 100644 --- a/arch/blackfin/include/asm/cacheflush.h +++ b/arch/blackfin/include/asm/cacheflush.h @@ -56,7 +56,7 @@ extern void blackfin_invalidate_entire_icache(void); static inline void flush_icache_range(unsigned start, unsigned end) { -#if defined(CONFIG_BFIN_WB) +#if defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK) blackfin_dcache_flush_range(start, end); #endif @@ -87,9 +87,9 @@ do { memcpy(dst, src, len); \ #else # define invalidate_dcache_range(start,end) do { } while (0) #endif -#if defined(CONFIG_BFIN_DCACHE) && defined(CONFIG_BFIN_WB) +#if defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK) # define flush_dcache_range(start,end) blackfin_dcache_flush_range((start), (end)) -# define flush_dcache_page(page) blackfin_dflush_page(page_address(page)) +# define flush_dcache_page(page) blackfin_dflush_page(page_address(page)) #else # define flush_dcache_range(start,end) do { } while (0) # define flush_dcache_page(page) do { } while (0) @@ -100,7 +100,7 @@ extern unsigned long reserved_mem_icache_on; static inline int bfin_addr_dcacheable(unsigned long addr) { -#ifdef CONFIG_BFIN_DCACHE +#ifdef CONFIG_BFIN_EXTMEM_DCACHEABLE if (addr < (_ramend - DMA_UNCACHED_REGION)) return 1; #endif @@ -109,7 +109,7 @@ static inline int bfin_addr_dcacheable(unsigned long addr) addr >= _ramend && addr < physical_mem_end) return 1; -#ifndef CONFIG_BFIN_L2_NOT_CACHED +#ifdef CONFIG_BFIN_L2_DCACHEABLE if (addr >= L2_START && addr < L2_START + L2_LENGTH) return 1; #endif diff --git a/arch/blackfin/include/asm/cplb.h b/arch/blackfin/include/asm/cplb.h index a75a6a9..c5dacf8 100644 --- a/arch/blackfin/include/asm/cplb.h +++ b/arch/blackfin/include/asm/cplb.h @@ -37,8 +37,6 @@ #define L1_IMEMORY ( CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) #define SDRAM_INON_CHBL ( CPLB_USER_RD | CPLB_VALID) -/*Use the menuconfig cache policy here - CONFIG_BFIN_WT/CONFIG_BFIN_WB*/ - #if ANOMALY_05000158 #define ANOMALY_05000158_WORKAROUND 0x200 #else @@ -47,10 +45,12 @@ #define CPLB_COMMON (CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND) -#ifdef CONFIG_BFIN_WB /*Write Back Policy */ +#ifdef CONFIG_BFIN_EXTMEM_WRITEBACK #define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_COMMON) -#else /*Write Through */ +#elif defined(CONFIG_BFIN_EXTMEM_WRITETHROUGH) #define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_COMMON) +#else +#define SDRAM_DGENERIC (CPLB_COMMON) #endif #define SDRAM_DNON_CHBL (CPLB_COMMON) @@ -61,21 +61,23 @@ #ifdef CONFIG_SMP #define L2_ATTR (INITIAL_T | I_CPLB | D_CPLB) -#define L2_IMEMORY (CPLB_COMMON) -#define L2_DMEMORY (CPLB_LOCK | CPLB_COMMON) +#define L2_IMEMORY (CPLB_COMMON | PAGE_SIZE_1MB) +#define L2_DMEMORY (CPLB_LOCK | CPLB_COMMON | PAGE_SIZE_1MB) #else #define L2_ATTR (INITIAL_T | SWITCH_T | I_CPLB | D_CPLB) -#define L2_IMEMORY (SDRAM_IGENERIC) - -# if defined(CONFIG_BFIN_L2_WB) -# define L2_DMEMORY (CPLB_L1_CHBL | CPLB_COMMON) -# elif defined(CONFIG_BFIN_L2_WT) -# define L2_DMEMORY (CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_COMMON) -# elif defined(CONFIG_BFIN_L2_NOT_CACHED) -# define L2_DMEMORY (CPLB_COMMON) +# if defined(CONFIG_BFIN_L2_ICACHEABLE) +# define L2_IMEMORY (CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | PAGE_SIZE_1MB) +# else +# define L2_IMEMORY ( CPLB_USER_RD | CPLB_VALID | PAGE_SIZE_1MB) +# endif + +# if defined(CONFIG_BFIN_L2_WRITEBACK) +# define L2_DMEMORY (CPLB_L1_CHBL | CPLB_COMMON | PAGE_SIZE_1MB) +# elif defined(CONFIG_BFIN_L2_WRITETHROUGH) +# define L2_DMEMORY (CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_COMMON | PAGE_SIZE_1MB) # else -# define L2_DMEMORY (0) +# define L2_DMEMORY (CPLB_COMMON | PAGE_SIZE_1MB) # endif #endif /* CONFIG_SMP */ diff --git a/arch/blackfin/kernel/cplb-mpu/cplbinit.c b/arch/blackfin/kernel/cplb-mpu/cplbinit.c index c006a44..36193ee 100644 --- a/arch/blackfin/kernel/cplb-mpu/cplbinit.c +++ b/arch/blackfin/kernel/cplb-mpu/cplbinit.c @@ -46,13 +46,13 @@ void __init generate_cplb_tables_cpu(unsigned int cpu) printk(KERN_INFO "MPU: setting up cplb tables with memory protection\n"); -#ifdef CONFIG_BFIN_ICACHE +#ifdef CONFIG_BFIN_EXTMEM_ICACHEABLE i_cache = CPLB_L1_CHBL | ANOMALY_05000158_WORKAROUND; #endif -#ifdef CONFIG_BFIN_DCACHE +#ifdef CONFIG_BFIN_EXTMEM_DCACHEABLE d_cache = CPLB_L1_CHBL; -#ifdef CONFIG_BFIN_WT +#ifdef CONFIG_BFIN_EXTMEM_WRITETROUGH d_cache |= CPLB_L1_AOW | CPLB_WT; #endif #endif @@ -91,9 +91,9 @@ void __init generate_cplb_tables_cpu(unsigned int cpu) /* Cover L2 memory */ #if L2_LENGTH > 0 dcplb_tbl[cpu][i_d].addr = L2_START; - dcplb_tbl[cpu][i_d++].data = L2_DMEMORY | PAGE_SIZE_1MB; + dcplb_tbl[cpu][i_d++].data = L2_DMEMORY; icplb_tbl[cpu][i_i].addr = L2_START; - icplb_tbl[cpu][i_i++].data = L2_IMEMORY | PAGE_SIZE_1MB; + icplb_tbl[cpu][i_i++].data = L2_IMEMORY; #endif first_mask_dcplb = i_d; diff --git a/arch/blackfin/kernel/cplb-mpu/cplbmgr.c b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c index 784923e..bcdfe9b 100644 --- a/arch/blackfin/kernel/cplb-mpu/cplbmgr.c +++ b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c @@ -150,15 +150,19 @@ static noinline int dcplb_miss(unsigned int cpu) nr_dcplb_miss[cpu]++; d_data = CPLB_SUPV_WR | CPLB_VALID | CPLB_DIRTY | PAGE_SIZE_4KB; -#ifdef CONFIG_BFIN_DCACHE +#ifdef CONFIG_BFIN_EXTMEM_DCACHEABLE if (bfin_addr_dcacheable(addr)) { d_data |= CPLB_L1_CHBL | ANOMALY_05000158_WORKAROUND; -#ifdef CONFIG_BFIN_WT +# ifdef CONFIG_BFIN_EXTMEM_WRITETHROUGH d_data |= CPLB_L1_AOW | CPLB_WT; -#endif +# endif } #endif - if (addr >= physical_mem_end) { + + if (L2_LENGTH && addr >= L2_START && addr < L2_START + L2_LENGTH) { + addr = L2_START; + d_data = L2_DMEMORY; + } else if (addr >= physical_mem_end) { if (addr >= ASYNC_BANK0_BASE && addr < ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE && (status & FAULT_USERSUPV)) { addr &= ~0x3fffff; @@ -235,7 +239,7 @@ static noinline int icplb_miss(unsigned int cpu) i_data = CPLB_VALID | CPLB_PORTPRIO | PAGE_SIZE_4KB; -#ifdef CONFIG_BFIN_ICACHE +#ifdef CONFIG_BFIN_EXTMEM_ICACHEABLE /* * Normal RAM, and possibly the reserved memory area, are * cacheable. @@ -245,7 +249,10 @@ static noinline int icplb_miss(unsigned int cpu) i_data |= CPLB_L1_CHBL | ANOMALY_05000158_WORKAROUND; #endif - if (addr >= physical_mem_end) { + if (L2_LENGTH && addr >= L2_START && addr < L2_START + L2_LENGTH) { + addr = L2_START; + i_data = L2_IMEMORY; + } else if (addr >= physical_mem_end) { if (addr >= BOOT_ROM_START && addr < BOOT_ROM_START + BOOT_ROM_LENGTH && (status & FAULT_USERSUPV)) { addr &= ~(1 * 1024 * 1024 - 1); @@ -365,13 +372,18 @@ void set_mask_dcplbs(unsigned long *masks, unsigned int cpu) local_irq_save_hw(flags); current_rwx_mask[cpu] = masks; - d_data = CPLB_SUPV_WR | CPLB_VALID | CPLB_DIRTY | PAGE_SIZE_4KB; -#ifdef CONFIG_BFIN_DCACHE - d_data |= CPLB_L1_CHBL; -#ifdef CONFIG_BFIN_WT - d_data |= CPLB_L1_AOW | CPLB_WT; -#endif + if (L2_LENGTH && addr >= L2_START && addr < L2_START + L2_LENGTH) { + addr = L2_START; + d_data = L2_DMEMORY; + } else { + d_data = CPLB_SUPV_WR | CPLB_VALID | CPLB_DIRTY | PAGE_SIZE_4KB; +#ifdef CONFIG_BFIN_EXTMEM_DCACHEABLE + d_data |= CPLB_L1_CHBL; +# ifdef CONFIG_BFIN_EXTMEM_WRITETHROUGH + d_data |= CPLB_L1_AOW | CPLB_WT; +# endif #endif + } disable_dcplb(); for (i = first_mask_dcplb; i < first_switched_dcplb; i++) { diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index b2782ea..8d78928 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -117,15 +117,49 @@ void __cpuinit bfin_setup_caches(unsigned int cpu) */ #ifdef CONFIG_BFIN_ICACHE printk(KERN_INFO "Instruction Cache Enabled for CPU%u\n", cpu); + printk(KERN_INFO " External memory:" +# ifdef CONFIG_BFIN_EXTMEM_ICACHEABLE + " cacheable" +# else + " uncacheable" +# endif + " in instruction cache\n"); + if (L2_LENGTH) + printk(KERN_INFO " L2 SRAM :" +# ifdef CONFIG_BFIN_L2_ICACHEABLE + " cacheable" +# else + " uncacheable" +# endif + " in instruction cache\n"); + +#else + printk(KERN_INFO "Instruction Cache Disabled for CPU%u\n", cpu); #endif + #ifdef CONFIG_BFIN_DCACHE - printk(KERN_INFO "Data Cache Enabled for CPU%u" -# if defined CONFIG_BFIN_WB - " (write-back)" -# elif defined CONFIG_BFIN_WT - " (write-through)" + printk(KERN_INFO "Data Cache Enabled for CPU%u\n", cpu); + printk(KERN_INFO " External memory:" +# if defined CONFIG_BFIN_EXTMEM_WRITEBACK + " cacheable (write-back)" +# elif defined CONFIG_BFIN_EXTMEM_WRITETHROUGH + " cacheable (write-through)" +# else + " uncacheable" +# endif + " in data cache\n"); + if (L2_LENGTH) + printk(KERN_INFO " L2 SRAM :" +# if defined CONFIG_BFIN_L2_WRITEBACK + " cacheable (write-back)" +# elif defined CONFIG_BFIN_L2_WRITETHROUGH + " cacheable (write-through)" +# else + " uncacheable" # endif - "\n", cpu); + " in data cache\n"); +#else + printk(KERN_INFO "Data Cache Disabled for CPU%u\n", cpu); #endif } @@ -516,7 +550,7 @@ static __init void memory_setup(void) && ((unsigned long *)mtd_phys)[1] == ROMSB_WORD1) mtd_size = PAGE_ALIGN(be32_to_cpu(((unsigned long *)mtd_phys)[2])); -# if (defined(CONFIG_BFIN_ICACHE) && ANOMALY_05000263) +# if (defined(CONFIG_BFIN_EXTMEM_ICACHEABLE) && ANOMALY_05000263) /* Due to a Hardware Anomaly we need to limit the size of usable * instruction memory to max 60MB, 56 if HUNT_FOR_ZERO is on * 05000263 - Hardware loop corrupted when taking an ICPLB exception @@ -544,7 +578,7 @@ static __init void memory_setup(void) dma_memcpy((void *)uclinux_ram_map.phys, _end, uclinux_ram_map.size); #endif /* CONFIG_MTD_UCLINUX */ -#if (defined(CONFIG_BFIN_ICACHE) && ANOMALY_05000263) +#if (defined(CONFIG_BFIN_EXTMEM_ICACHEABLE) && ANOMALY_05000263) /* Due to a Hardware Anomaly we need to limit the size of usable * instruction memory to max 60MB, 56 if HUNT_FOR_ZERO is on * 05000263 - Hardware loop corrupted when taking an ICPLB exception @@ -1158,16 +1192,25 @@ static int show_cpuinfo(struct seq_file *m, void *v) icache_size = 0; seq_printf(m, "cache size\t: %d KB(L1 icache) " - "%d KB(L1 dcache%s) %d KB(L2 cache)\n", - icache_size, dcache_size, -#if defined CONFIG_BFIN_WB - "-wb" -#elif defined CONFIG_BFIN_WT - "-wt" -#endif - "", 0); - + "%d KB(L1 dcache) %d KB(L2 cache)\n", + icache_size, dcache_size, 0); seq_printf(m, "%s\n", cache); + seq_printf(m, "external memory\t: " +#if defined(CONFIG_BFIN_EXTMEM_ICACHEABLE) + "cacheable" +#else + "uncacheable" +#endif + " in instruction cache\n"); + seq_printf(m, "external memory\t: " +#if defined(CONFIG_BFIN_EXTMEM_WRITEBACK) + "cacheable (write-back)" +#elif defined(CONFIG_BFIN_EXTMEM_WRITETHROUGH) + "cacheable (write-through)" +#else + "uncacheable" +#endif + " in data cache\n"); if (icache_size) seq_printf(m, "icache setup\t: %d Sub-banks/%d Ways, %d Lines/Way\n", @@ -1240,8 +1283,25 @@ static int show_cpuinfo(struct seq_file *m, void *v) if (cpu_num != num_possible_cpus() - 1) return 0; - if (L2_LENGTH) + if (L2_LENGTH) { seq_printf(m, "L2 SRAM\t\t: %dKB\n", L2_LENGTH/0x400); + seq_printf(m, "L2 SRAM\t\t: " +#if defined(CONFIG_BFIN_L2_ICACHEABLE) + "cacheable" +#else + "uncacheable" +#endif + " in instruction cache\n"); + seq_printf(m, "L2 SRAM\t\t: " +#if defined(CONFIG_BFIN_L2_WRITEBACK) + "cacheable (write-back)" +#elif defined(CONFIG_BFIN_L2_WRITETHROUGH) + "cacheable (write-through)" +#else + "uncacheable" +#endif + " in data cache\n"); + } seq_printf(m, "board name\t: %s\n", bfin_board_name); seq_printf(m, "board memory\t: %ld kB (0x%p -> 0x%p)\n", physical_mem_end >> 10, (void *)0, (void *)physical_mem_end); diff --git a/arch/blackfin/mach-common/arch_checks.c b/arch/blackfin/mach-common/arch_checks.c index da93d92..5998d86 100644 --- a/arch/blackfin/mach-common/arch_checks.c +++ b/arch/blackfin/mach-common/arch_checks.c @@ -74,7 +74,7 @@ /* if 220 exists, can not set External Memory WB and L2 not_cached, either External Memory not_cached and L2 WB */ #if ANOMALY_05000220 && \ - ((defined(CONFIG_BFIN_WB) && defined(CONFIG_BFIN_L2_NOT_CACHED)) || \ - (!defined(CONFIG_BFIN_DCACHE) && defined(CONFIG_BFIN_L2_WB))) + ((defined(CONFIG_BFIN_EXTMEM_WRITEBACK) && !defined(CONFIG_BFIN_L2_DCACHEABLE)) || \ + (!defined(CONFIG_BFIN_EXTMEM_DCACHEABLE) && defined(CONFIG_BFIN_L2_WRITEBACK))) # error You are exposing Anomaly 220 in this config, either config L2 as Write Through, or make External Memory WB. #endif diff --git a/arch/blackfin/mach-common/cpufreq.c b/arch/blackfin/mach-common/cpufreq.c index 70e3411..85c6580 100644 --- a/arch/blackfin/mach-common/cpufreq.c +++ b/arch/blackfin/mach-common/cpufreq.c @@ -141,7 +141,7 @@ static int __init __bfin_cpu_init(struct cpufreq_policy *policy) sclk = get_sclk() / 1000; #if ANOMALY_05000273 || ANOMALY_05000274 || \ - (!defined(CONFIG_BF54x) && defined(CONFIG_BFIN_DCACHE)) + (!defined(CONFIG_BF54x) && defined(CONFIG_BFIN_EXTMEM_DCACHEABLE)) min_cclk = sclk * 2; #else min_cclk = sclk; diff --git a/arch/blackfin/mach-common/pm.c b/arch/blackfin/mach-common/pm.c index bce5a84..9e7e27b 100644 --- a/arch/blackfin/mach-common/pm.c +++ b/arch/blackfin/mach-common/pm.c @@ -132,7 +132,7 @@ int bf53x_resume_l1_mem(unsigned char *memptr) return 0; } -#ifdef CONFIG_BFIN_WB +#if defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK) static void flushinv_all_dcache(void) { u32 way, bank, subbank, set; @@ -175,7 +175,7 @@ static inline void dcache_disable(void) #ifdef CONFIG_BFIN_DCACHE unsigned long ctrl; -#ifdef CONFIG_BFIN_WB +#if defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK) flushinv_all_dcache(); #endif SSYNC(); diff --git a/arch/blackfin/mm/init.c b/arch/blackfin/mm/init.c index 014a55a..68bd0bd6 100644 --- a/arch/blackfin/mm/init.c +++ b/arch/blackfin/mm/init.c @@ -160,7 +160,7 @@ void __init mem_init(void) /* do not count in kernel image between _rambase and _ramstart */ reservedpages -= (_ramstart - _rambase) >> PAGE_SHIFT; -#if (defined(CONFIG_BFIN_ICACHE) && ANOMALY_05000263) +#if (defined(CONFIG_BFIN_EXTMEM_ICACHEABLE) && ANOMALY_05000263) reservedpages += (_ramend - memory_end - DMA_UNCACHED_REGION) >> PAGE_SHIFT; #endif -- cgit v1.1 From 841a534367c2cfdc325a11958c51406da17686c7 Mon Sep 17 00:00:00 2001 From: Mike Frysinger <vapier@gentoo.org> Date: Wed, 17 Jun 2009 07:11:42 +0000 Subject: Blackfin: update defconfigs Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- arch/blackfin/configs/BF518F-EZBRD_defconfig | 24 +++++++++++++++--------- arch/blackfin/configs/BF526-EZBRD_defconfig | 22 ++++++++++++---------- arch/blackfin/configs/BF527-EZKIT_defconfig | 22 ++++++++++++++-------- arch/blackfin/configs/BF533-EZKIT_defconfig | 25 +++++++++++++++++-------- arch/blackfin/configs/BF533-STAMP_defconfig | 22 ++++++++++++++-------- arch/blackfin/configs/BF537-STAMP_defconfig | 22 ++++++++++++++-------- arch/blackfin/configs/BF538-EZKIT_defconfig | 22 ++++++++++++++-------- arch/blackfin/configs/BF548-EZKIT_defconfig | 27 ++++++++++++++++----------- arch/blackfin/configs/BF561-EZKIT_defconfig | 27 ++++++++++++++++----------- arch/blackfin/configs/BlackStamp_defconfig | 12 +++++++++--- arch/blackfin/configs/CM-BF527_defconfig | 22 ++++++++++++++-------- arch/blackfin/configs/CM-BF533_defconfig | 23 ++++++++++++++--------- arch/blackfin/configs/CM-BF537E_defconfig | 22 ++++++++++++++-------- arch/blackfin/configs/CM-BF537U_defconfig | 23 ++++++++++++++--------- arch/blackfin/configs/CM-BF548_defconfig | 25 ++++++++++++++++--------- arch/blackfin/configs/CM-BF561_defconfig | 25 ++++++++++++++++--------- arch/blackfin/configs/H8606_defconfig | 14 ++++++++++---- arch/blackfin/configs/PNAV-10_defconfig | 20 +++++++++++++------- arch/blackfin/configs/SRV1_defconfig | 14 ++++++++++---- arch/blackfin/configs/TCM-BF537_defconfig | 14 ++++++++++---- 20 files changed, 272 insertions(+), 155 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/configs/BF518F-EZBRD_defconfig b/arch/blackfin/configs/BF518F-EZBRD_defconfig index baec133..dcfb488 100644 --- a/arch/blackfin/configs/BF518F-EZBRD_defconfig +++ b/arch/blackfin/configs/BF518F-EZBRD_defconfig @@ -326,11 +326,17 @@ CONFIG_DMA_UNCACHED_1M=y # Cache Support # CONFIG_BFIN_ICACHE=y +# CONFIG_BFIN_ICACHE_LOCK is not set CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -# CONFIG_BFIN_ICACHE_LOCK is not set -CONFIG_BFIN_WB=y -# CONFIG_BFIN_WT is not set +CONFIG_BFIN_EXTMEM_ICACHEABLE=y +CONFIG_BFIN_EXTMEM_DCACHEABLE=y +CONFIG_BFIN_EXTMEM_WRITEBACK=y +# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set + +# +# Memory Protection Unit +# # CONFIG_MPU is not set # @@ -413,11 +419,11 @@ CONFIG_IP_PNP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y +# CONFIG_INET_DIAG is not set CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y @@ -916,7 +922,7 @@ CONFIG_MMC_BLOCK_BOUNCE=y # CONFIG_MMC_SDHCI is not set CONFIG_SDH_BFIN=m CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND=y -CONFIG_SDH_BFIN_ENABLE_SDIO_IRQ=y +# CONFIG_SDH_BFIN_ENABLE_SDIO_IRQ is not set # CONFIG_MMC_SPI is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1147,7 +1153,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set diff --git a/arch/blackfin/configs/BF526-EZBRD_defconfig b/arch/blackfin/configs/BF526-EZBRD_defconfig index c06262e..48a3a7a 100644 --- a/arch/blackfin/configs/BF526-EZBRD_defconfig +++ b/arch/blackfin/configs/BF526-EZBRD_defconfig @@ -331,16 +331,18 @@ CONFIG_DMA_UNCACHED_1M=y # Cache Support # CONFIG_BFIN_ICACHE=y +# CONFIG_BFIN_ICACHE_LOCK is not set CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -# CONFIG_BFIN_ICACHE_LOCK is not set -CONFIG_BFIN_WB=y -# CONFIG_BFIN_WT is not set -# CONFIG_MPU is not set +CONFIG_BFIN_EXTMEM_ICACHEABLE=y +CONFIG_BFIN_EXTMEM_DCACHEABLE=y +CONFIG_BFIN_EXTMEM_WRITEBACK=y +# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set # -# Asynchonous Memory Configuration +# Memory Protection Unit # +# CONFIG_MPU is not set # # EBIU_AMGCTL Global Control @@ -418,11 +420,11 @@ CONFIG_IP_PNP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y +# CONFIG_INET_DIAG is not set CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y @@ -1424,7 +1426,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig index e9175c6..dd83527 100644 --- a/arch/blackfin/configs/BF527-EZKIT_defconfig +++ b/arch/blackfin/configs/BF527-EZKIT_defconfig @@ -331,11 +331,17 @@ CONFIG_DMA_UNCACHED_1M=y # Cache Support # CONFIG_BFIN_ICACHE=y +# CONFIG_BFIN_ICACHE_LOCK is not set CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -# CONFIG_BFIN_ICACHE_LOCK is not set -CONFIG_BFIN_WB=y -# CONFIG_BFIN_WT is not set +CONFIG_BFIN_EXTMEM_ICACHEABLE=y +CONFIG_BFIN_EXTMEM_DCACHEABLE=y +CONFIG_BFIN_EXTMEM_WRITEBACK=y +# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set + +# +# Memory Protection Unit +# # CONFIG_MPU is not set # @@ -418,11 +424,11 @@ CONFIG_IP_PNP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y +# CONFIG_INET_DIAG is not set CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y @@ -1505,7 +1511,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig index 5aa63ba..4c04480 100644 --- a/arch/blackfin/configs/BF533-EZKIT_defconfig +++ b/arch/blackfin/configs/BF533-EZKIT_defconfig @@ -292,12 +292,21 @@ CONFIG_DMA_UNCACHED_1M=y # # Cache Support # +# +# Cache Support +# CONFIG_BFIN_ICACHE=y +# CONFIG_BFIN_ICACHE_LOCK is not set CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -# CONFIG_BFIN_ICACHE_LOCK is not set -CONFIG_BFIN_WB=y -# CONFIG_BFIN_WT is not set +CONFIG_BFIN_EXTMEM_ICACHEABLE=y +CONFIG_BFIN_EXTMEM_DCACHEABLE=y +CONFIG_BFIN_EXTMEM_WRITEBACK=y +# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set + +# +# Memory Protection Unit +# # CONFIG_MPU is not set # @@ -391,11 +400,11 @@ CONFIG_IP_PNP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y +# CONFIG_INET_DIAG is not set CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y @@ -1052,7 +1061,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig index fed2532..c99bbcd 100644 --- a/arch/blackfin/configs/BF533-STAMP_defconfig +++ b/arch/blackfin/configs/BF533-STAMP_defconfig @@ -293,11 +293,17 @@ CONFIG_DMA_UNCACHED_1M=y # Cache Support # CONFIG_BFIN_ICACHE=y +# CONFIG_BFIN_ICACHE_LOCK is not set CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -# CONFIG_BFIN_ICACHE_LOCK is not set -CONFIG_BFIN_WB=y -# CONFIG_BFIN_WT is not set +CONFIG_BFIN_EXTMEM_ICACHEABLE=y +CONFIG_BFIN_EXTMEM_DCACHEABLE=y +CONFIG_BFIN_EXTMEM_WRITEBACK=y +# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set + +# +# Memory Protection Unit +# # CONFIG_MPU is not set # @@ -391,11 +397,11 @@ CONFIG_IP_PNP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y +# CONFIG_INET_DIAG is not set CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y @@ -1216,7 +1222,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig index f9ac20d..092ffda 100644 --- a/arch/blackfin/configs/BF537-STAMP_defconfig +++ b/arch/blackfin/configs/BF537-STAMP_defconfig @@ -300,11 +300,17 @@ CONFIG_DMA_UNCACHED_1M=y # Cache Support # CONFIG_BFIN_ICACHE=y +# CONFIG_BFIN_ICACHE_LOCK is not set CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -# CONFIG_BFIN_ICACHE_LOCK is not set -CONFIG_BFIN_WB=y -# CONFIG_BFIN_WT is not set +CONFIG_BFIN_EXTMEM_ICACHEABLE=y +CONFIG_BFIN_EXTMEM_DCACHEABLE=y +CONFIG_BFIN_EXTMEM_WRITEBACK=y +# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set + +# +# Memory Protection Unit +# # CONFIG_MPU is not set # @@ -399,11 +405,11 @@ CONFIG_IP_PNP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y +# CONFIG_INET_DIAG is not set CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y @@ -1269,7 +1275,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set diff --git a/arch/blackfin/configs/BF538-EZKIT_defconfig b/arch/blackfin/configs/BF538-EZKIT_defconfig index ee98e22..fa698a8 100644 --- a/arch/blackfin/configs/BF538-EZKIT_defconfig +++ b/arch/blackfin/configs/BF538-EZKIT_defconfig @@ -311,11 +311,17 @@ CONFIG_DMA_UNCACHED_1M=y # Cache Support # CONFIG_BFIN_ICACHE=y +# CONFIG_BFIN_ICACHE_LOCK is not set CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -# CONFIG_BFIN_ICACHE_LOCK is not set -CONFIG_BFIN_WB=y -# CONFIG_BFIN_WT is not set +CONFIG_BFIN_EXTMEM_ICACHEABLE=y +CONFIG_BFIN_EXTMEM_DCACHEABLE=y +CONFIG_BFIN_EXTMEM_WRITEBACK=y +# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set + +# +# Memory Protection Unit +# # CONFIG_MPU is not set # @@ -398,11 +404,11 @@ CONFIG_IP_PNP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y +# CONFIG_INET_DIAG is not set CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y @@ -1203,7 +1209,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig index deeabef..b3d3cab 100644 --- a/arch/blackfin/configs/BF548-EZKIT_defconfig +++ b/arch/blackfin/configs/BF548-EZKIT_defconfig @@ -366,14 +366,19 @@ CONFIG_DMA_UNCACHED_2M=y # Cache Support # CONFIG_BFIN_ICACHE=y +# CONFIG_BFIN_ICACHE_LOCK is not set CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -# CONFIG_BFIN_ICACHE_LOCK is not set -CONFIG_BFIN_WB=y -# CONFIG_BFIN_WT is not set -# CONFIG_BFIN_L2_WB is not set -CONFIG_BFIN_L2_WT=y -# CONFIG_BFIN_L2_NOT_CACHED is not set +CONFIG_BFIN_EXTMEM_ICACHEABLE=y +CONFIG_BFIN_EXTMEM_DCACHEABLE=y +CONFIG_BFIN_EXTMEM_WRITEBACK=y +# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set +# CONFIG_BFIN_L2_ICACHEABLE is not set +# CONFIG_BFIN_L2_DCACHEABLE is not set + +# +# Memory Protection Unit +# # CONFIG_MPU is not set # @@ -459,11 +464,11 @@ CONFIG_IP_PNP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y +# CONFIG_INET_DIAG is not set CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y @@ -1606,7 +1611,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig index dcfbe2e..0313cd1 100644 --- a/arch/blackfin/configs/BF561-EZKIT_defconfig +++ b/arch/blackfin/configs/BF561-EZKIT_defconfig @@ -331,14 +331,19 @@ CONFIG_DMA_UNCACHED_1M=y # Cache Support # CONFIG_BFIN_ICACHE=y +# CONFIG_BFIN_ICACHE_LOCK is not set CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -# CONFIG_BFIN_ICACHE_LOCK is not set -CONFIG_BFIN_WB=y -# CONFIG_BFIN_WT is not set -# CONFIG_BFIN_L2_WB is not set -CONFIG_BFIN_L2_WT=y -# CONFIG_BFIN_L2_NOT_CACHED is not set +CONFIG_BFIN_EXTMEM_ICACHEABLE=y +CONFIG_BFIN_EXTMEM_DCACHEABLE=y +CONFIG_BFIN_EXTMEM_WRITEBACK=y +# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set +# CONFIG_BFIN_L2_ICACHEABLE is not set +# CONFIG_BFIN_L2_DCACHEABLE is not set + +# +# Memory Protection Unit +# # CONFIG_MPU is not set # @@ -425,11 +430,11 @@ CONFIG_IP_PNP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y +# CONFIG_INET_DIAG is not set CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y @@ -1044,7 +1049,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set diff --git a/arch/blackfin/configs/BlackStamp_defconfig b/arch/blackfin/configs/BlackStamp_defconfig index 174c578..5d944ff 100644 --- a/arch/blackfin/configs/BlackStamp_defconfig +++ b/arch/blackfin/configs/BlackStamp_defconfig @@ -285,11 +285,17 @@ CONFIG_DMA_UNCACHED_1M=y # Cache Support # CONFIG_BFIN_ICACHE=y +# CONFIG_BFIN_ICACHE_LOCK is not set CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -# CONFIG_BFIN_ICACHE_LOCK is not set -CONFIG_BFIN_WB=y -# CONFIG_BFIN_WT is not set +CONFIG_BFIN_EXTMEM_ICACHEABLE=y +CONFIG_BFIN_EXTMEM_DCACHEABLE=y +CONFIG_BFIN_EXTMEM_WRITEBACK=y +# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set + +# +# Memory Protection Unit +# # CONFIG_MPU is not set # diff --git a/arch/blackfin/configs/CM-BF527_defconfig b/arch/blackfin/configs/CM-BF527_defconfig index e17875e..648a31d 100644 --- a/arch/blackfin/configs/CM-BF527_defconfig +++ b/arch/blackfin/configs/CM-BF527_defconfig @@ -329,11 +329,17 @@ CONFIG_DMA_UNCACHED_1M=y # Cache Support # CONFIG_BFIN_ICACHE=y +# CONFIG_BFIN_ICACHE_LOCK is not set CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -# CONFIG_BFIN_ICACHE_LOCK is not set -CONFIG_BFIN_WB=y -# CONFIG_BFIN_WT is not set +CONFIG_BFIN_EXTMEM_ICACHEABLE=y +CONFIG_BFIN_EXTMEM_DCACHEABLE=y +CONFIG_BFIN_EXTMEM_WRITEBACK=y +# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set + +# +# Memory Protection Unit +# # CONFIG_MPU is not set # @@ -417,11 +423,11 @@ CONFIG_IP_PNP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y +# CONFIG_INET_DIAG is not set CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y @@ -1246,7 +1252,7 @@ CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set diff --git a/arch/blackfin/configs/CM-BF533_defconfig b/arch/blackfin/configs/CM-BF533_defconfig index fafd95e..ae665b9 100644 --- a/arch/blackfin/configs/CM-BF533_defconfig +++ b/arch/blackfin/configs/CM-BF533_defconfig @@ -262,12 +262,17 @@ CONFIG_DMA_UNCACHED_1M=y # Cache Support # CONFIG_BFIN_ICACHE=y +# CONFIG_BFIN_ICACHE_LOCK is not set CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -# CONFIG_BFIN_ICACHE_LOCK is not set -CONFIG_BFIN_WB=y -# CONFIG_BFIN_WT is not set -CONFIG_L1_MAX_PIECE=16 +CONFIG_BFIN_EXTMEM_ICACHEABLE=y +CONFIG_BFIN_EXTMEM_DCACHEABLE=y +CONFIG_BFIN_EXTMEM_WRITEBACK=y +# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set + +# +# Memory Protection Unit +# # CONFIG_MPU is not set # @@ -353,10 +358,10 @@ CONFIG_IP_FIB_HASH=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y -CONFIG_INET_DIAG=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_DIAG is not set CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y @@ -873,7 +878,7 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MMRS=y CONFIG_DEBUG_HUNT_FOR_ZERO=y CONFIG_DEBUG_BFIN_HWTRACE_ON=y diff --git a/arch/blackfin/configs/CM-BF537E_defconfig b/arch/blackfin/configs/CM-BF537E_defconfig index e73aa5a..d74b6f4 100644 --- a/arch/blackfin/configs/CM-BF537E_defconfig +++ b/arch/blackfin/configs/CM-BF537E_defconfig @@ -297,11 +297,17 @@ CONFIG_DMA_UNCACHED_1M=y # Cache Support # CONFIG_BFIN_ICACHE=y +# CONFIG_BFIN_ICACHE_LOCK is not set CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -# CONFIG_BFIN_ICACHE_LOCK is not set -CONFIG_BFIN_WB=y -# CONFIG_BFIN_WT is not set +CONFIG_BFIN_EXTMEM_ICACHEABLE=y +CONFIG_BFIN_EXTMEM_DCACHEABLE=y +CONFIG_BFIN_EXTMEM_WRITEBACK=y +# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set + +# +# Memory Protection Unit +# # CONFIG_MPU is not set # @@ -383,11 +389,11 @@ CONFIG_IP_PNP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y +# CONFIG_INET_DIAG is not set CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y @@ -861,7 +867,7 @@ CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_SECTION_MISMATCH=y # CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set diff --git a/arch/blackfin/configs/CM-BF537U_defconfig b/arch/blackfin/configs/CM-BF537U_defconfig index 8021130..7fc8dfa1 100644 --- a/arch/blackfin/configs/CM-BF537U_defconfig +++ b/arch/blackfin/configs/CM-BF537U_defconfig @@ -270,12 +270,17 @@ CONFIG_DMA_UNCACHED_1M=y # Cache Support # CONFIG_BFIN_ICACHE=y +# CONFIG_BFIN_ICACHE_LOCK is not set CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -# CONFIG_BFIN_ICACHE_LOCK is not set -CONFIG_BFIN_WB=y -# CONFIG_BFIN_WT is not set -CONFIG_L1_MAX_PIECE=16 +CONFIG_BFIN_EXTMEM_ICACHEABLE=y +CONFIG_BFIN_EXTMEM_DCACHEABLE=y +CONFIG_BFIN_EXTMEM_WRITEBACK=y +# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set + +# +# Memory Protection Unit +# # CONFIG_MPU is not set # @@ -361,10 +366,10 @@ CONFIG_IP_FIB_HASH=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y -CONFIG_INET_DIAG=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_DIAG is not set CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y @@ -901,7 +906,7 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MMRS=y CONFIG_DEBUG_HUNT_FOR_ZERO=y CONFIG_DEBUG_BFIN_HWTRACE_ON=y diff --git a/arch/blackfin/configs/CM-BF548_defconfig b/arch/blackfin/configs/CM-BF548_defconfig index dd815f0..acca4e5 100644 --- a/arch/blackfin/configs/CM-BF548_defconfig +++ b/arch/blackfin/configs/CM-BF548_defconfig @@ -333,12 +333,19 @@ CONFIG_DMA_UNCACHED_1M=y # Cache Support # CONFIG_BFIN_ICACHE=y +# CONFIG_BFIN_ICACHE_LOCK is not set CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -# CONFIG_BFIN_ICACHE_LOCK is not set -CONFIG_BFIN_WB=y -# CONFIG_BFIN_WT is not set -CONFIG_L1_MAX_PIECE=16 +CONFIG_BFIN_EXTMEM_ICACHEABLE=y +CONFIG_BFIN_EXTMEM_DCACHEABLE=y +CONFIG_BFIN_EXTMEM_WRITEBACK=y +# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set +# CONFIG_BFIN_L2_ICACHEABLE is not set +# CONFIG_BFIN_L2_DCACHEABLE is not set + +# +# Memory Protection Unit +# # CONFIG_MPU is not set # @@ -428,11 +435,11 @@ CONFIG_IP_PNP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y +# CONFIG_INET_DIAG is not set CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y @@ -1334,7 +1341,7 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_SAMPLES is not set CONFIG_DEBUG_MMRS=y CONFIG_DEBUG_HUNT_FOR_ZERO=y diff --git a/arch/blackfin/configs/CM-BF561_defconfig b/arch/blackfin/configs/CM-BF561_defconfig index 16c198b..bae4ee6 100644 --- a/arch/blackfin/configs/CM-BF561_defconfig +++ b/arch/blackfin/configs/CM-BF561_defconfig @@ -308,12 +308,19 @@ CONFIG_DMA_UNCACHED_1M=y # Cache Support # CONFIG_BFIN_ICACHE=y +# CONFIG_BFIN_ICACHE_LOCK is not set CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -# CONFIG_BFIN_ICACHE_LOCK is not set -CONFIG_BFIN_WB=y -# CONFIG_BFIN_WT is not set -CONFIG_L1_MAX_PIECE=16 +CONFIG_BFIN_EXTMEM_ICACHEABLE=y +CONFIG_BFIN_EXTMEM_DCACHEABLE=y +CONFIG_BFIN_EXTMEM_WRITEBACK=y +# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set +# CONFIG_BFIN_L2_ICACHEABLE is not set +# CONFIG_BFIN_L2_DCACHEABLE is not set + +# +# Memory Protection Unit +# # CONFIG_MPU is not set # @@ -395,11 +402,11 @@ CONFIG_IP_FIB_HASH=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y +# CONFIG_INET_DIAG is not set CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y @@ -837,7 +844,7 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_SAMPLES is not set CONFIG_DEBUG_MMRS=y CONFIG_DEBUG_HUNT_FOR_ZERO=y diff --git a/arch/blackfin/configs/H8606_defconfig b/arch/blackfin/configs/H8606_defconfig index 6b4c1a9..a6a7c8e 100644 --- a/arch/blackfin/configs/H8606_defconfig +++ b/arch/blackfin/configs/H8606_defconfig @@ -258,12 +258,18 @@ CONFIG_DMA_UNCACHED_1M=y # Cache Support # CONFIG_BFIN_ICACHE=y +# CONFIG_BFIN_ICACHE_LOCK is not set CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -CONFIG_BFIN_ICACHE_LOCK=y -CONFIG_BFIN_WB=y -# CONFIG_BFIN_WT is not set -CONFIG_L1_MAX_PIECE=16 +CONFIG_BFIN_EXTMEM_ICACHEABLE=y +CONFIG_BFIN_EXTMEM_DCACHEABLE=y +CONFIG_BFIN_EXTMEM_WRITEBACK=y +# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set + +# +# Memory Protection Unit +# +# CONFIG_MPU is not set # # Asynchonous Memory Configuration diff --git a/arch/blackfin/configs/PNAV-10_defconfig b/arch/blackfin/configs/PNAV-10_defconfig index 09701f9..ff377fa 100644 --- a/arch/blackfin/configs/PNAV-10_defconfig +++ b/arch/blackfin/configs/PNAV-10_defconfig @@ -295,11 +295,17 @@ CONFIG_DMA_UNCACHED_1M=y # Cache Support # CONFIG_BFIN_ICACHE=y +# CONFIG_BFIN_ICACHE_LOCK is not set CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -# CONFIG_BFIN_ICACHE_LOCK is not set -CONFIG_BFIN_WB=y -# CONFIG_BFIN_WT is not set +CONFIG_BFIN_EXTMEM_ICACHEABLE=y +CONFIG_BFIN_EXTMEM_DCACHEABLE=y +CONFIG_BFIN_EXTMEM_WRITEBACK=y +# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set + +# +# Memory Protection Unit +# # CONFIG_MPU is not set # @@ -382,11 +388,11 @@ CONFIG_IP_PNP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y +# CONFIG_INET_DIAG is not set CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y diff --git a/arch/blackfin/configs/SRV1_defconfig b/arch/blackfin/configs/SRV1_defconfig index ec84a53..814f9ca 100644 --- a/arch/blackfin/configs/SRV1_defconfig +++ b/arch/blackfin/configs/SRV1_defconfig @@ -279,12 +279,18 @@ CONFIG_DMA_UNCACHED_2M=y # Cache Support # CONFIG_BFIN_ICACHE=y +# CONFIG_BFIN_ICACHE_LOCK is not set CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -# CONFIG_BFIN_ICACHE_LOCK is not set -CONFIG_BFIN_WB=y -# CONFIG_BFIN_WT is not set -CONFIG_L1_MAX_PIECE=16 +CONFIG_BFIN_EXTMEM_ICACHEABLE=y +CONFIG_BFIN_EXTMEM_DCACHEABLE=y +CONFIG_BFIN_EXTMEM_WRITEBACK=y +# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set + +# +# Memory Protection Unit +# +# CONFIG_MPU is not set # # Asynchonous Memory Configuration diff --git a/arch/blackfin/configs/TCM-BF537_defconfig b/arch/blackfin/configs/TCM-BF537_defconfig index 6e27962..375e75a 100644 --- a/arch/blackfin/configs/TCM-BF537_defconfig +++ b/arch/blackfin/configs/TCM-BF537_defconfig @@ -287,11 +287,17 @@ CONFIG_DMA_UNCACHED_1M=y # Cache Support # CONFIG_BFIN_ICACHE=y +# CONFIG_BFIN_ICACHE_LOCK is not set CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -# CONFIG_BFIN_ICACHE_LOCK is not set -CONFIG_BFIN_WB=y -# CONFIG_BFIN_WT is not set +CONFIG_BFIN_EXTMEM_ICACHEABLE=y +CONFIG_BFIN_EXTMEM_DCACHEABLE=y +CONFIG_BFIN_EXTMEM_WRITEBACK=y +# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set + +# +# Memory Protection Unit +# # CONFIG_MPU is not set # @@ -709,7 +715,7 @@ CONFIG_FRAME_WARN=1024 CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set -- cgit v1.1 From 985895bd8d1e41079b41da32cdc57876a4a74126 Mon Sep 17 00:00:00 2001 From: Robin Getz <rgetz@blackfin.uclinux.org> Date: Wed, 17 Jun 2009 08:12:54 -0400 Subject: Blackfin: stick the CPU name into boot image name Rather than use "Linux" in the boot image name (as this is redundant -- the image type is already set to "linux"), use the CPU name. This makes it fairly obvious when a wrong image is accidentally booted. Otherwise there is no kernel output and you waste time scratching your head wondering wtf just happened. Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- arch/blackfin/boot/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/blackfin/boot/Makefile b/arch/blackfin/boot/Makefile index 3ab6f23..fd9ccc5 100644 --- a/arch/blackfin/boot/Makefile +++ b/arch/blackfin/boot/Makefile @@ -13,7 +13,7 @@ extra-y += vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma quiet_cmd_uimage = UIMAGE $@ cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A $(ARCH) -O linux -T kernel \ - -C $(2) -n 'Linux-$(KERNELRELEASE)' -a $(CONFIG_BOOT_LOAD) \ + -C $(2) -n '$(MACHINE)-$(KERNELRELEASE)' -a $(CONFIG_BOOT_LOAD) \ -e $(shell $(NM) vmlinux | awk '$$NF == "__start" {print $$1}') \ -d $< $@ -- cgit v1.1 From fa48f84a8cc722ca48b32fa0c338b6c3b358717d Mon Sep 17 00:00:00 2001 From: Mike Frysinger <vapier@gentoo.org> Date: Wed, 17 Jun 2009 11:25:06 -0400 Subject: Blackfin: unify memory map headers Many aspects of the Blackfin memory map is exactly the same across all variants. Rather than copy and paste all of these duplicated values in each header, unify all of these into the common Blackfin memory map header file. In the process, push down BF561 SMP specific stuff to the BF561 specific header to keep the noise down. Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- arch/blackfin/include/asm/blackfin.h | 1 + arch/blackfin/include/asm/mem_map.h | 97 ++++++++++++------------ arch/blackfin/mach-bf518/include/mach/blackfin.h | 1 - arch/blackfin/mach-bf518/include/mach/mem_map.h | 56 +++----------- arch/blackfin/mach-bf527/include/mach/blackfin.h | 1 - arch/blackfin/mach-bf527/include/mach/mem_map.h | 56 +++----------- arch/blackfin/mach-bf533/include/mach/blackfin.h | 1 - arch/blackfin/mach-bf533/include/mach/mem_map.h | 56 +++----------- arch/blackfin/mach-bf537/include/mach/blackfin.h | 1 - arch/blackfin/mach-bf537/include/mach/mem_map.h | 56 +++----------- arch/blackfin/mach-bf538/include/mach/blackfin.h | 1 - arch/blackfin/mach-bf538/include/mach/mem_map.h | 57 +++----------- arch/blackfin/mach-bf548/include/mach/blackfin.h | 1 - arch/blackfin/mach-bf548/include/mach/mem_map.h | 51 +++---------- arch/blackfin/mach-bf561/include/mach/blackfin.h | 1 - arch/blackfin/mach-bf561/include/mach/mem_map.h | 58 ++++++++++---- 16 files changed, 145 insertions(+), 350 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/include/asm/blackfin.h b/arch/blackfin/include/asm/blackfin.h index 8bb2cb1..4d44395 100644 --- a/arch/blackfin/include/asm/blackfin.h +++ b/arch/blackfin/include/asm/blackfin.h @@ -86,6 +86,7 @@ static inline void CSYNC(void) #endif /* __ASSEMBLY__ */ +#include <asm/mem_map.h> #include <mach/blackfin.h> #include <asm/bfin-global.h> diff --git a/arch/blackfin/include/asm/mem_map.h b/arch/blackfin/include/asm/mem_map.h index e92b310..5e21627 100644 --- a/arch/blackfin/include/asm/mem_map.h +++ b/arch/blackfin/include/asm/mem_map.h @@ -1,87 +1,84 @@ /* - * mem_map.h - * Common header file for blackfin family of processors. + * Common Blackfin memory map * + * Copyright 2004-2009 Analog Devices Inc. + * Licensed under the GPL-2 or later. */ -#ifndef _MEM_MAP_H_ -#define _MEM_MAP_H_ +#ifndef __BFIN_MEM_MAP_H__ +#define __BFIN_MEM_MAP_H__ #include <mach/mem_map.h> -#ifndef __ASSEMBLY__ +/* Every Blackfin so far has MMRs like this */ +#ifndef COREMMR_BASE +# define COREMMR_BASE 0xFFE00000 +#endif +#ifndef SYSMMR_BASE +# define SYSMMR_BASE 0xFFC00000 +#endif -#ifdef CONFIG_SMP -static inline ulong get_l1_scratch_start_cpu(int cpu) -{ - return (cpu) ? COREB_L1_SCRATCH_START : COREA_L1_SCRATCH_START; -} -static inline ulong get_l1_code_start_cpu(int cpu) -{ - return (cpu) ? COREB_L1_CODE_START : COREA_L1_CODE_START; -} -static inline ulong get_l1_data_a_start_cpu(int cpu) -{ - return (cpu) ? COREB_L1_DATA_A_START : COREA_L1_DATA_A_START; -} -static inline ulong get_l1_data_b_start_cpu(int cpu) -{ - return (cpu) ? COREB_L1_DATA_B_START : COREA_L1_DATA_B_START; -} +/* Every Blackfin so far has on-chip Scratch Pad SRAM like this */ +#ifndef L1_SCRATCH_START +# define L1_SCRATCH_START 0xFFB00000 +# define L1_SCRATCH_LENGTH 0x1000 +#endif -static inline ulong get_l1_scratch_start(void) -{ - return get_l1_scratch_start_cpu(blackfin_core_id()); -} -static inline ulong get_l1_code_start(void) -{ - return get_l1_code_start_cpu(blackfin_core_id()); -} -static inline ulong get_l1_data_a_start(void) -{ - return get_l1_data_a_start_cpu(blackfin_core_id()); -} -static inline ulong get_l1_data_b_start(void) -{ - return get_l1_data_b_start_cpu(blackfin_core_id()); -} +/* Most parts lack on-chip L2 SRAM */ +#ifndef L2_START +# define L2_START 0 +# define L2_LENGTH 0 +#endif + +/* Most parts lack on-chip L1 ROM */ +#ifndef L1_ROM_START +# define L1_ROM_START 0 +# define L1_ROM_LENGTH 0 +#endif + +/* Allow wonky SMP ports to override this */ +#ifndef GET_PDA_SAFE +# define GET_PDA_SAFE(preg) \ + preg.l = _cpu_pda; \ + preg.h = _cpu_pda; +# define GET_PDA(preg, dreg) GET_PDA_SAFE(preg) -#else /* !CONFIG_SMP */ +# ifndef __ASSEMBLY__ -static inline ulong get_l1_scratch_start_cpu(int cpu) +static inline unsigned long get_l1_scratch_start_cpu(int cpu) { return L1_SCRATCH_START; } -static inline ulong get_l1_code_start_cpu(int cpu) +static inline unsigned long get_l1_code_start_cpu(int cpu) { return L1_CODE_START; } -static inline ulong get_l1_data_a_start_cpu(int cpu) +static inline unsigned long get_l1_data_a_start_cpu(int cpu) { return L1_DATA_A_START; } -static inline ulong get_l1_data_b_start_cpu(int cpu) +static inline unsigned long get_l1_data_b_start_cpu(int cpu) { return L1_DATA_B_START; } -static inline ulong get_l1_scratch_start(void) +static inline unsigned long get_l1_scratch_start(void) { return get_l1_scratch_start_cpu(0); } -static inline ulong get_l1_code_start(void) +static inline unsigned long get_l1_code_start(void) { return get_l1_code_start_cpu(0); } -static inline ulong get_l1_data_a_start(void) +static inline unsigned long get_l1_data_a_start(void) { return get_l1_data_a_start_cpu(0); } -static inline ulong get_l1_data_b_start(void) +static inline unsigned long get_l1_data_b_start(void) { return get_l1_data_b_start_cpu(0); } -#endif /* CONFIG_SMP */ -#endif /* __ASSEMBLY__ */ +# endif /* __ASSEMBLY__ */ +#endif /* !GET_PDA_SAFE */ -#endif /* _MEM_MAP_H_ */ +#endif diff --git a/arch/blackfin/mach-bf518/include/mach/blackfin.h b/arch/blackfin/mach-bf518/include/mach/blackfin.h index 267bb7c..e8e14c2 100644 --- a/arch/blackfin/mach-bf518/include/mach/blackfin.h +++ b/arch/blackfin/mach-bf518/include/mach/blackfin.h @@ -33,7 +33,6 @@ #define _MACH_BLACKFIN_H_ #include "bf518.h" -#include "mem_map.h" #include "defBF512.h" #include "anomaly.h" diff --git a/arch/blackfin/mach-bf518/include/mach/mem_map.h b/arch/blackfin/mach-bf518/include/mach/mem_map.h index 62bcc78..3c6777c 100644 --- a/arch/blackfin/mach-bf518/include/mach/mem_map.h +++ b/arch/blackfin/mach-bf518/include/mach/mem_map.h @@ -1,38 +1,16 @@ /* - * file: include/asm-blackfin/mach-bf518/mem_map.h - * based on: include/asm-blackfin/mach-bf527/mem_map.h - * author: Bryan Wu <cooloney@kernel.org> + * BF51x memory map * - * created: - * description: - * Memory MAP Common header file for blackfin BF518/6/4/2 of processors. - * rev: - * - * modified: - * - * bugs: enter bugs at http://blackfin.uclinux.org/ - * - * this program is free software; you can redistribute it and/or modify - * it under the terms of the gnu general public license as published by - * the free software foundation; either version 2, or (at your option) - * any later version. - * - * this program is distributed in the hope that it will be useful, - * but without any warranty; without even the implied warranty of - * merchantability or fitness for a particular purpose. see the - * gnu general public license for more details. - * - * you should have received a copy of the gnu general public license - * along with this program; see the file copying. - * if not, write to the free software foundation, - * 59 temple place - suite 330, boston, ma 02111-1307, usa. + * Copyright 2004-2009 Analog Devices Inc. + * Licensed under the GPL-2 or later. */ -#ifndef _MEM_MAP_518_H_ -#define _MEM_MAP_518_H_ +#ifndef __BFIN_MACH_MEM_MAP_H__ +#define __BFIN_MACH_MEM_MAP_H__ -#define COREMMR_BASE 0xFFE00000 /* Core MMRs */ -#define SYSMMR_BASE 0xFFC00000 /* System MMRs */ +#ifndef __BFIN_MEM_MAP_H__ +# error "do not include mach/mem_map.h directly -- use asm/mem_map.h" +#endif /* Async Memory Banks */ #define ASYNC_BANK3_BASE 0x20300000 /* Async Bank 3 */ @@ -89,20 +67,4 @@ #define BFIN_DSUPBANKS 0 #endif /*CONFIG_BFIN_DCACHE */ -/* Level 2 Memory - none */ - -#define L2_START 0 -#define L2_LENGTH 0 - -/* Scratch Pad Memory */ - -#define L1_SCRATCH_START 0xFFB00000 -#define L1_SCRATCH_LENGTH 0x1000 - -#define GET_PDA_SAFE(preg) \ - preg.l = _cpu_pda; \ - preg.h = _cpu_pda; - -#define GET_PDA(preg, dreg) GET_PDA_SAFE(preg) - -#endif /* _MEM_MAP_518_H_ */ +#endif diff --git a/arch/blackfin/mach-bf527/include/mach/blackfin.h b/arch/blackfin/mach-bf527/include/mach/blackfin.h index 417abcd..03665a8 100644 --- a/arch/blackfin/mach-bf527/include/mach/blackfin.h +++ b/arch/blackfin/mach-bf527/include/mach/blackfin.h @@ -33,7 +33,6 @@ #define _MACH_BLACKFIN_H_ #include "bf527.h" -#include "mem_map.h" #include "defBF522.h" #include "anomaly.h" diff --git a/arch/blackfin/mach-bf527/include/mach/mem_map.h b/arch/blackfin/mach-bf527/include/mach/mem_map.h index 019e001..d96e894 100644 --- a/arch/blackfin/mach-bf527/include/mach/mem_map.h +++ b/arch/blackfin/mach-bf527/include/mach/mem_map.h @@ -1,38 +1,16 @@ /* - * file: include/asm-blackfin/mach-bf527/mem_map.h - * based on: include/asm-blackfin/mach-bf537/mem_map.h - * author: Michael Hennerich (michael.hennerich@analog.com) + * BF52x memory map * - * created: - * description: - * Memory MAP Common header file for blackfin BF527/5/2 of processors. - * rev: - * - * modified: - * - * bugs: enter bugs at http://blackfin.uclinux.org/ - * - * this program is free software; you can redistribute it and/or modify - * it under the terms of the gnu general public license as published by - * the free software foundation; either version 2, or (at your option) - * any later version. - * - * this program is distributed in the hope that it will be useful, - * but without any warranty; without even the implied warranty of - * merchantability or fitness for a particular purpose. see the - * gnu general public license for more details. - * - * you should have received a copy of the gnu general public license - * along with this program; see the file copying. - * if not, write to the free software foundation, - * 59 temple place - suite 330, boston, ma 02111-1307, usa. + * Copyright 2004-2009 Analog Devices Inc. + * Licensed under the GPL-2 or later. */ -#ifndef _MEM_MAP_527_H_ -#define _MEM_MAP_527_H_ +#ifndef __BFIN_MACH_MEM_MAP_H__ +#define __BFIN_MACH_MEM_MAP_H__ -#define COREMMR_BASE 0xFFE00000 /* Core MMRs */ -#define SYSMMR_BASE 0xFFC00000 /* System MMRs */ +#ifndef __BFIN_MEM_MAP_H__ +# error "do not include mach/mem_map.h directly -- use asm/mem_map.h" +#endif /* Async Memory Banks */ #define ASYNC_BANK3_BASE 0x20300000 /* Async Bank 3 */ @@ -89,20 +67,4 @@ #define BFIN_DSUPBANKS 0 #endif /*CONFIG_BFIN_DCACHE */ -/* Level 2 Memory - none */ - -#define L2_START 0 -#define L2_LENGTH 0 - -/* Scratch Pad Memory */ - -#define L1_SCRATCH_START 0xFFB00000 -#define L1_SCRATCH_LENGTH 0x1000 - -#define GET_PDA_SAFE(preg) \ - preg.l = _cpu_pda; \ - preg.h = _cpu_pda; - -#define GET_PDA(preg, dreg) GET_PDA_SAFE(preg) - -#endif /* _MEM_MAP_527_H_ */ +#endif diff --git a/arch/blackfin/mach-bf533/include/mach/blackfin.h b/arch/blackfin/mach-bf533/include/mach/blackfin.h index 045184f..39aa175 100644 --- a/arch/blackfin/mach-bf533/include/mach/blackfin.h +++ b/arch/blackfin/mach-bf533/include/mach/blackfin.h @@ -34,7 +34,6 @@ #define BF533_FAMILY #include "bf533.h" -#include "mem_map.h" #include "defBF532.h" #include "anomaly.h" diff --git a/arch/blackfin/mach-bf533/include/mach/mem_map.h b/arch/blackfin/mach-bf533/include/mach/mem_map.h index fc33b7c..197af1a 100644 --- a/arch/blackfin/mach-bf533/include/mach/mem_map.h +++ b/arch/blackfin/mach-bf533/include/mach/mem_map.h @@ -1,38 +1,16 @@ /* - * File: include/asm-blackfin/mach-bf533/mem_map.h - * Based on: - * Author: + * BF533 memory map * - * Created: - * Description: - * - * Rev: - * - * Modified: - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Copyright 2004-2009 Analog Devices Inc. + * Licensed under the GPL-2 or later. */ -#ifndef _MEM_MAP_533_H_ -#define _MEM_MAP_533_H_ +#ifndef __BFIN_MACH_MEM_MAP_H__ +#define __BFIN_MACH_MEM_MAP_H__ -#define COREMMR_BASE 0xFFE00000 /* Core MMRs */ -#define SYSMMR_BASE 0xFFC00000 /* System MMRs */ +#ifndef __BFIN_MEM_MAP_H__ +# error "do not include mach/mem_map.h directly -- use asm/mem_map.h" +#endif /* Async Memory Banks */ #define ASYNC_BANK3_BASE 0x20300000 /* Async Bank 3 */ @@ -158,20 +136,4 @@ #endif -/* Level 2 Memory - none */ - -#define L2_START 0 -#define L2_LENGTH 0 - -/* Scratch Pad Memory */ - -#define L1_SCRATCH_START 0xFFB00000 -#define L1_SCRATCH_LENGTH 0x1000 - -#define GET_PDA_SAFE(preg) \ - preg.l = _cpu_pda; \ - preg.h = _cpu_pda; - -#define GET_PDA(preg, dreg) GET_PDA_SAFE(preg) - -#endif /* _MEM_MAP_533_H_ */ +#endif diff --git a/arch/blackfin/mach-bf537/include/mach/blackfin.h b/arch/blackfin/mach-bf537/include/mach/blackfin.h index 7d6069c..f5e5015 100644 --- a/arch/blackfin/mach-bf537/include/mach/blackfin.h +++ b/arch/blackfin/mach-bf537/include/mach/blackfin.h @@ -35,7 +35,6 @@ #define BF537_FAMILY #include "bf537.h" -#include "mem_map.h" #include "defBF534.h" #include "anomaly.h" diff --git a/arch/blackfin/mach-bf537/include/mach/mem_map.h b/arch/blackfin/mach-bf537/include/mach/mem_map.h index f9010c4b4..942f08d 100644 --- a/arch/blackfin/mach-bf537/include/mach/mem_map.h +++ b/arch/blackfin/mach-bf537/include/mach/mem_map.h @@ -1,38 +1,16 @@ /* - * file: include/asm-blackfin/mach-bf537/mem_map.h - * based on: - * author: + * BF537 memory map * - * created: - * description: - * Memory MAP Common header file for blackfin BF537/6/4 of processors. - * rev: - * - * modified: - * - * bugs: enter bugs at http://blackfin.uclinux.org/ - * - * this program is free software; you can redistribute it and/or modify - * it under the terms of the gnu general public license as published by - * the free software foundation; either version 2, or (at your option) - * any later version. - * - * this program is distributed in the hope that it will be useful, - * but without any warranty; without even the implied warranty of - * merchantability or fitness for a particular purpose. see the - * gnu general public license for more details. - * - * you should have received a copy of the gnu general public license - * along with this program; see the file copying. - * if not, write to the free software foundation, - * 59 temple place - suite 330, boston, ma 02111-1307, usa. + * Copyright 2004-2009 Analog Devices Inc. + * Licensed under the GPL-2 or later. */ -#ifndef _MEM_MAP_537_H_ -#define _MEM_MAP_537_H_ +#ifndef __BFIN_MACH_MEM_MAP_H__ +#define __BFIN_MACH_MEM_MAP_H__ -#define COREMMR_BASE 0xFFE00000 /* Core MMRs */ -#define SYSMMR_BASE 0xFFC00000 /* System MMRs */ +#ifndef __BFIN_MEM_MAP_H__ +# error "do not include mach/mem_map.h directly -- use asm/mem_map.h" +#endif /* Async Memory Banks */ #define ASYNC_BANK3_BASE 0x20300000 /* Async Bank 3 */ @@ -166,20 +144,4 @@ #endif -/* Level 2 Memory - none */ - -#define L2_START 0 -#define L2_LENGTH 0 - -/* Scratch Pad Memory */ - -#define L1_SCRATCH_START 0xFFB00000 -#define L1_SCRATCH_LENGTH 0x1000 - -#define GET_PDA_SAFE(preg) \ - preg.l = _cpu_pda; \ - preg.h = _cpu_pda; - -#define GET_PDA(preg, dreg) GET_PDA_SAFE(preg) - -#endif /* _MEM_MAP_537_H_ */ +#endif diff --git a/arch/blackfin/mach-bf538/include/mach/blackfin.h b/arch/blackfin/mach-bf538/include/mach/blackfin.h index 6f62835..9496196 100644 --- a/arch/blackfin/mach-bf538/include/mach/blackfin.h +++ b/arch/blackfin/mach-bf538/include/mach/blackfin.h @@ -35,7 +35,6 @@ #define BF538_FAMILY #include "bf538.h" -#include "mem_map.h" #include "defBF539.h" #include "anomaly.h" diff --git a/arch/blackfin/mach-bf538/include/mach/mem_map.h b/arch/blackfin/mach-bf538/include/mach/mem_map.h index 7681196..aff00f4 100644 --- a/arch/blackfin/mach-bf538/include/mach/mem_map.h +++ b/arch/blackfin/mach-bf538/include/mach/mem_map.h @@ -1,38 +1,16 @@ /* - * File: include/asm-blackfin/mach-bf538/mem_map.h - * Based on: - * Author: + * BF538 memory map * - * Created: - * Description: - * - * Rev: - * - * Modified: - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Copyright 2004-2009 Analog Devices Inc. + * Licensed under the GPL-2 or later. */ -#ifndef _MEM_MAP_538_H_ -#define _MEM_MAP_538_H_ +#ifndef __BFIN_MACH_MEM_MAP_H__ +#define __BFIN_MACH_MEM_MAP_H__ -#define COREMMR_BASE 0xFFE00000 /* Core MMRs */ -#define SYSMMR_BASE 0xFFC00000 /* System MMRs */ +#ifndef __BFIN_MEM_MAP_H__ +# error "do not include mach/mem_map.h directly -- use asm/mem_map.h" +#endif /* Async Memory Banks */ #define ASYNC_BANK3_BASE 0x20300000 /* Async Bank 3 */ @@ -93,21 +71,4 @@ #define BFIN_DSUPBANKS 0 #endif /*CONFIG_BFIN_DCACHE*/ - -/* Level 2 Memory - none */ - -#define L2_START 0 -#define L2_LENGTH 0 - -/* Scratch Pad Memory */ - -#define L1_SCRATCH_START 0xFFB00000 -#define L1_SCRATCH_LENGTH 0x1000 - -#define GET_PDA_SAFE(preg) \ - preg.l = _cpu_pda; \ - preg.h = _cpu_pda; - -#define GET_PDA(preg, dreg) GET_PDA_SAFE(preg) - -#endif /* _MEM_MAP_538_H_ */ +#endif diff --git a/arch/blackfin/mach-bf548/include/mach/blackfin.h b/arch/blackfin/mach-bf548/include/mach/blackfin.h index cf6c150..6b97396 100644 --- a/arch/blackfin/mach-bf548/include/mach/blackfin.h +++ b/arch/blackfin/mach-bf548/include/mach/blackfin.h @@ -33,7 +33,6 @@ #define _MACH_BLACKFIN_H_ #include "bf548.h" -#include "mem_map.h" #include "anomaly.h" #ifdef CONFIG_BF542 diff --git a/arch/blackfin/mach-bf548/include/mach/mem_map.h b/arch/blackfin/mach-bf548/include/mach/mem_map.h index 70b9c11..caac2df 100644 --- a/arch/blackfin/mach-bf548/include/mach/mem_map.h +++ b/arch/blackfin/mach-bf548/include/mach/mem_map.h @@ -1,38 +1,16 @@ /* - * file: include/asm-blackfin/mach-bf548/mem_map.h - * based on: - * author: + * BF548 memory map * - * created: - * description: - * Memory MAP Common header file for blackfin BF537/6/4 of processors. - * rev: - * - * modified: - * - * bugs: enter bugs at http://blackfin.uclinux.org/ - * - * this program is free software; you can redistribute it and/or modify - * it under the terms of the gnu general public license as published by - * the free software foundation; either version 2, or (at your option) - * any later version. - * - * this program is distributed in the hope that it will be useful, - * but without any warranty; without even the implied warranty of - * merchantability or fitness for a particular purpose. see the - * gnu general public license for more details. - * - * you should have received a copy of the gnu general public license - * along with this program; see the file copying. - * if not, write to the free software foundation, - * 59 temple place - suite 330, boston, ma 02111-1307, usa. + * Copyright 2004-2009 Analog Devices Inc. + * Licensed under the GPL-2 or later. */ -#ifndef _MEM_MAP_548_H_ -#define _MEM_MAP_548_H_ +#ifndef __BFIN_MACH_MEM_MAP_H__ +#define __BFIN_MACH_MEM_MAP_H__ -#define COREMMR_BASE 0xFFE00000 /* Core MMRs */ -#define SYSMMR_BASE 0xFFC00000 /* System MMRs */ +#ifndef __BFIN_MEM_MAP_H__ +# error "do not include mach/mem_map.h directly -- use asm/mem_map.h" +#endif /* Async Memory Banks */ #define ASYNC_BANK3_BASE 0x2C000000 /* Async Bank 3 */ @@ -103,15 +81,4 @@ # define L2_LENGTH 0x20000 #endif -/* Scratch Pad Memory */ - -#define L1_SCRATCH_START 0xFFB00000 -#define L1_SCRATCH_LENGTH 0x1000 - -#define GET_PDA_SAFE(preg) \ - preg.l = _cpu_pda; \ - preg.h = _cpu_pda; - -#define GET_PDA(preg, dreg) GET_PDA_SAFE(preg) - -#endif/* _MEM_MAP_548_H_ */ +#endif diff --git a/arch/blackfin/mach-bf561/include/mach/blackfin.h b/arch/blackfin/mach-bf561/include/mach/blackfin.h index f79f6626..8be3135 100644 --- a/arch/blackfin/mach-bf561/include/mach/blackfin.h +++ b/arch/blackfin/mach-bf561/include/mach/blackfin.h @@ -34,7 +34,6 @@ #define BF561_FAMILY #include "bf561.h" -#include "mem_map.h" #include "defBF561.h" #include "anomaly.h" diff --git a/arch/blackfin/mach-bf561/include/mach/mem_map.h b/arch/blackfin/mach-bf561/include/mach/mem_map.h index 419dffd..a63e15c 100644 --- a/arch/blackfin/mach-bf561/include/mach/mem_map.h +++ b/arch/blackfin/mach-bf561/include/mach/mem_map.h @@ -1,13 +1,16 @@ /* - * Memory MAP - * Common header file for blackfin BF561 of processors. + * BF561 memory map + * + * Copyright 2004-2009 Analog Devices Inc. + * Licensed under the GPL-2 or later. */ -#ifndef _MEM_MAP_561_H_ -#define _MEM_MAP_561_H_ +#ifndef __BFIN_MACH_MEM_MAP_H__ +#define __BFIN_MACH_MEM_MAP_H__ -#define COREMMR_BASE 0xFFE00000 /* Core MMRs */ -#define SYSMMR_BASE 0xFFC00000 /* System MMRs */ +#ifndef __BFIN_MEM_MAP_H__ +# error "do not include mach/mem_map.h directly -- use asm/mem_map.h" +#endif /* Async Memory Banks */ #define ASYNC_BANK3_BASE 0x2C000000 /* Async Bank 3 */ @@ -82,9 +85,6 @@ #define COREA_L1_SCRATCH_START 0xFFB00000 #define COREB_L1_SCRATCH_START 0xFF700000 -#define L1_SCRATCH_START COREA_L1_SCRATCH_START -#define L1_SCRATCH_LENGTH 0x1000 - #ifdef __ASSEMBLY__ /* @@ -155,14 +155,42 @@ dreg = ROT dreg BY -1; \ dreg = CC; -#else -#define GET_PDA_SAFE(preg) \ - preg.l = _cpu_pda; \ - preg.h = _cpu_pda; +static inline unsigned long get_l1_scratch_start_cpu(int cpu) +{ + return cpu ? COREB_L1_SCRATCH_START : COREA_L1_SCRATCH_START; +} +static inline unsigned long get_l1_code_start_cpu(int cpu) +{ + return cpu ? COREB_L1_CODE_START : COREA_L1_CODE_START; +} +static inline unsigned long get_l1_data_a_start_cpu(int cpu) +{ + return cpu ? COREB_L1_DATA_A_START : COREA_L1_DATA_A_START; +} +static inline unsigned long get_l1_data_b_start_cpu(int cpu) +{ + return cpu ? COREB_L1_DATA_B_START : COREA_L1_DATA_B_START; +} + +static inline unsigned long get_l1_scratch_start(void) +{ + return get_l1_scratch_start_cpu(blackfin_core_id()); +} +static inline unsigned long get_l1_code_start(void) +{ + return get_l1_code_start_cpu(blackfin_core_id()); +} +static inline unsigned long get_l1_data_a_start(void) +{ + return get_l1_data_a_start_cpu(blackfin_core_id()); +} +static inline unsigned long get_l1_data_b_start(void) +{ + return get_l1_data_b_start_cpu(blackfin_core_id()); +} -#define GET_PDA(preg, dreg) GET_PDA_SAFE(preg) #endif /* CONFIG_SMP */ #endif /* __ASSEMBLY__ */ -#endif /* _MEM_MAP_533_H_ */ +#endif -- cgit v1.1 From 8f580f7c82ed9edeb3629568aabcde2caff3f236 Mon Sep 17 00:00:00 2001 From: Graf Yang <graf.yang@analog.com> Date: Thu, 18 Jun 2009 04:21:39 +0000 Subject: Blackfin: fix typo in TRAS define in mem_init.h header We defined SDRAM_tRAS to TRAS_4, but then wrongly defined SDRAM_tRAS_num to 3. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- arch/blackfin/include/asm/mem_init.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/blackfin/include/asm/mem_init.h b/arch/blackfin/include/asm/mem_init.h index 61f7487..fc164b3 100644 --- a/arch/blackfin/include/asm/mem_init.h +++ b/arch/blackfin/include/asm/mem_init.h @@ -59,7 +59,7 @@ #define SDRAM_tRP TRP_1 #define SDRAM_tRP_num 1 #define SDRAM_tRAS TRAS_4 -#define SDRAM_tRAS_num 3 +#define SDRAM_tRAS_num 4 #define SDRAM_tRCD TRCD_1 #define SDRAM_tWR TWR_2 #endif -- cgit v1.1 From ee48efb5dc45aeb9786dea6469d3e1bea5105036 Mon Sep 17 00:00:00 2001 From: Graf Yang <graf.yang@analog.com> Date: Thu, 18 Jun 2009 04:32:04 +0000 Subject: Blackfin: bf526-ezbrd: handle different SDRAM chips The BF526-EZBRD changed SDRAM chips between board revisions, so create a timing table that can accommodate both. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- arch/blackfin/Kconfig | 7 ++- arch/blackfin/include/asm/mem_init.h | 86 ++++++++++++++++++++++++++++++++++++ 2 files changed, 92 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index 220635a..384f7cd 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -358,7 +358,7 @@ config MEM_MT48LC8M32B2B5_7 config MEM_MT48LC32M16A2TG_75 bool - depends on (BFIN527_EZKIT || BFIN532_IP0X || BLACKSTAMP || BFIN526_EZBRD) + depends on (BFIN527_EZKIT || BFIN532_IP0X || BLACKSTAMP) default y config MEM_MT48LC32M8A2_75 @@ -366,6 +366,11 @@ config MEM_MT48LC32M8A2_75 depends on (BFIN518F_EZBRD) default y +config MEM_MT48H32M16LFCJ_75 + bool + depends on (BFIN526_EZBRD) + default y + source "arch/blackfin/mach-bf518/Kconfig" source "arch/blackfin/mach-bf527/Kconfig" source "arch/blackfin/mach-bf533/Kconfig" diff --git a/arch/blackfin/include/asm/mem_init.h b/arch/blackfin/include/asm/mem_init.h index fc164b3..4179e32 100644 --- a/arch/blackfin/include/asm/mem_init.h +++ b/arch/blackfin/include/asm/mem_init.h @@ -89,6 +89,85 @@ #endif #endif +/* + * The BF526-EZ-Board changed SDRAM chips between revisions, + * so we use below timings to accommodate both. + */ +#if defined(CONFIG_MEM_MT48H32M16LFCJ_75) +#if (CONFIG_SCLK_HZ > 119402985) +#define SDRAM_tRP TRP_2 +#define SDRAM_tRP_num 2 +#define SDRAM_tRAS TRAS_8 +#define SDRAM_tRAS_num 8 +#define SDRAM_tRCD TRCD_2 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 104477612) && (CONFIG_SCLK_HZ <= 119402985) +#define SDRAM_tRP TRP_2 +#define SDRAM_tRP_num 2 +#define SDRAM_tRAS TRAS_7 +#define SDRAM_tRAS_num 7 +#define SDRAM_tRCD TRCD_2 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 89552239) && (CONFIG_SCLK_HZ <= 104477612) +#define SDRAM_tRP TRP_2 +#define SDRAM_tRP_num 2 +#define SDRAM_tRAS TRAS_6 +#define SDRAM_tRAS_num 6 +#define SDRAM_tRCD TRCD_2 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 74626866) && (CONFIG_SCLK_HZ <= 89552239) +#define SDRAM_tRP TRP_2 +#define SDRAM_tRP_num 2 +#define SDRAM_tRAS TRAS_5 +#define SDRAM_tRAS_num 5 +#define SDRAM_tRCD TRCD_2 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 66666667) && (CONFIG_SCLK_HZ <= 74626866) +#define SDRAM_tRP TRP_2 +#define SDRAM_tRP_num 2 +#define SDRAM_tRAS TRAS_4 +#define SDRAM_tRAS_num 4 +#define SDRAM_tRCD TRCD_2 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 59701493) && (CONFIG_SCLK_HZ <= 66666667) +#define SDRAM_tRP TRP_2 +#define SDRAM_tRP_num 2 +#define SDRAM_tRAS TRAS_4 +#define SDRAM_tRAS_num 4 +#define SDRAM_tRCD TRCD_1 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 44776119) && (CONFIG_SCLK_HZ <= 59701493) +#define SDRAM_tRP TRP_2 +#define SDRAM_tRP_num 2 +#define SDRAM_tRAS TRAS_3 +#define SDRAM_tRAS_num 3 +#define SDRAM_tRCD TRCD_1 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 29850746) && (CONFIG_SCLK_HZ <= 44776119) +#define SDRAM_tRP TRP_1 +#define SDRAM_tRP_num 1 +#define SDRAM_tRAS TRAS_3 +#define SDRAM_tRAS_num 3 +#define SDRAM_tRCD TRCD_1 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ <= 29850746) +#define SDRAM_tRP TRP_1 +#define SDRAM_tRP_num 1 +#define SDRAM_tRAS TRAS_2 +#define SDRAM_tRAS_num 2 +#define SDRAM_tRCD TRCD_1 +#define SDRAM_tWR TWR_2 +#endif +#endif + #if defined(CONFIG_MEM_MT48LC16M8A2TG_75) || \ defined(CONFIG_MEM_MT48LC8M32B2B5_7) /*SDRAM INFORMATION: */ @@ -109,6 +188,13 @@ #define SDRAM_CL CL_3 #endif +#if defined(CONFIG_MEM_MT48H32M16LFCJ_75) + /*SDRAM INFORMATION: */ +#define SDRAM_Tref 64 /* Refresh period in milliseconds */ +#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ +#define SDRAM_CL CL_2 +#endif + #ifdef CONFIG_BFIN_KERNEL_CLOCK_MEMINIT_CALC /* Equation from section 17 (p17-46) of BF533 HRM */ -- cgit v1.1 From 3a7f5b1605570f5259e71d1846be27588a00bbaf Mon Sep 17 00:00:00 2001 From: Mike Frysinger <vapier@gentoo.org> Date: Thu, 18 Jun 2009 19:13:03 +0000 Subject: Blackfin: drop unused ISP1760 port1_disable from board resources The port1 disable stuff was dropped from the USB ISP1760, so update the Blackfin boards accordingly. Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- arch/blackfin/mach-bf527/boards/cm_bf527.c | 1 - arch/blackfin/mach-bf527/boards/ezkit.c | 1 - arch/blackfin/mach-bf537/boards/stamp.c | 1 - arch/blackfin/mach-bf548/boards/ezkit.c | 1 - arch/blackfin/mach-bf561/boards/ezkit.c | 1 - 5 files changed, 5 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c index 1eaf27f..f4867ce 100644 --- a/arch/blackfin/mach-bf527/boards/cm_bf527.c +++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c @@ -78,7 +78,6 @@ static struct resource bfin_isp1760_resources[] = { static struct isp1760_platform_data isp1760_priv = { .is_isp1761 = 0, - .port1_disable = 0, .bus_width_16 = 1, .port1_otg = 0, .analog_oc = 0, diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c index 3e5b7db..799a1d1 100644 --- a/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/arch/blackfin/mach-bf527/boards/ezkit.c @@ -77,7 +77,6 @@ static struct resource bfin_isp1760_resources[] = { static struct isp1760_platform_data isp1760_priv = { .is_isp1761 = 0, - .port1_disable = 0, .bus_width_16 = 1, .port1_otg = 0, .analog_oc = 0, diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index ff7228c..c1f76dd 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -79,7 +79,6 @@ static struct resource bfin_isp1760_resources[] = { static struct isp1760_platform_data isp1760_priv = { .is_isp1761 = 0, - .port1_disable = 0, .bus_width_16 = 1, .port1_otg = 0, .analog_oc = 0, diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c index 805a57b..81f5b95 100644 --- a/arch/blackfin/mach-bf548/boards/ezkit.c +++ b/arch/blackfin/mach-bf548/boards/ezkit.c @@ -76,7 +76,6 @@ static struct resource bfin_isp1760_resources[] = { static struct isp1760_platform_data isp1760_priv = { .is_isp1761 = 0, - .port1_disable = 0, .bus_width_16 = 1, .port1_otg = 0, .analog_oc = 0, diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c index b5ef7ff..4df904f 100644 --- a/arch/blackfin/mach-bf561/boards/ezkit.c +++ b/arch/blackfin/mach-bf561/boards/ezkit.c @@ -62,7 +62,6 @@ static struct resource bfin_isp1760_resources[] = { static struct isp1760_platform_data isp1760_priv = { .is_isp1761 = 0, - .port1_disable = 0, .bus_width_16 = 1, .port1_otg = 0, .analog_oc = 0, -- cgit v1.1 From 3aca47c02097a78a566f67e7ec5fa3e0f2583a73 Mon Sep 17 00:00:00 2001 From: Mike Frysinger <vapier@gentoo.org> Date: Thu, 18 Jun 2009 19:40:47 +0000 Subject: Blackfin: fix GPTMR0_CLOCKSOURCE dependency on BFIN_GPTIMERS The GPTMR0_CLOCKSOURCE Kconfig option requires the gptimers framework, so make sure it is selected when this option is enabled. Reported-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- arch/blackfin/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index 384f7cd..7faa2f5 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -648,6 +648,7 @@ config CYCLES_CLOCKSOURCE config GPTMR0_CLOCKSOURCE bool "Use GPTimer0 as a clocksource (higher rating)" + select BFIN_GPTIMERS depends on GENERIC_CLOCKEVENTS depends on !TICKSOURCE_GPTMR0 -- cgit v1.1 From bd854c077e660b5f44b5049219645042bcba61ac Mon Sep 17 00:00:00 2001 From: Robin Getz <robin.getz@analog.com> Date: Thu, 18 Jun 2009 22:53:43 +0000 Subject: Blackfin: fix early crash when booting on wrong cpu Make sure we process the kernel command line before poking the hardware, so that we can process early printk. This helps ensure that if you boot a kernel configured for a different processor, something will be left in the log buffer. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- arch/blackfin/kernel/setup.c | 23 +++++++++++++++-------- 1 file changed, 15 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index 8d78928..298f023 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -477,9 +477,11 @@ static __init void parse_cmdline_early(char *cmdline_p) } else if (!memcmp(to, "clkin_hz=", 9)) { to += 9; early_init_clkin_hz(to); +#ifdef CONFIG_EARLY_PRINTK } else if (!memcmp(to, "earlyprintk=", 12)) { to += 12; setup_early_printk(to); +#endif } else if (!memcmp(to, "memmap=", 7)) { to += 7; parse_memmap(to); @@ -798,6 +800,11 @@ void __init setup_arch(char **cmdline_p) { unsigned long sclk, cclk; + /* Check to make sure we are running on the right processor */ + if (unlikely(CPUID != bfin_cpuid())) + printk(KERN_ERR "ERROR: Not running on ADSP-%s: unknown CPUID 0x%04x Rev 0.%d\n", + CPU, bfin_cpuid(), bfin_revid()); + #ifdef CONFIG_DUMMY_CONSOLE conswitchp = &dummy_con; #endif @@ -812,14 +819,17 @@ void __init setup_arch(char **cmdline_p) memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE); boot_command_line[COMMAND_LINE_SIZE - 1] = '\0'; - /* setup memory defaults from the user config */ - physical_mem_end = 0; - _ramend = get_mem_size() * 1024 * 1024; - memset(&bfin_memmap, 0, sizeof(bfin_memmap)); + /* If the user does not specify things on the command line, use + * what the bootloader set things up as + */ + physical_mem_end = 0; parse_cmdline_early(&command_line[0]); + if (_ramend == 0) + _ramend = get_mem_size() * 1024 * 1024; + if (physical_mem_end == 0) physical_mem_end = _ramend; @@ -910,10 +920,7 @@ void __init setup_arch(char **cmdline_p) else printk(KERN_INFO "Compiled for ADSP-%s Rev 0.%d\n", CPU, bfin_compiled_revid()); - if (unlikely(CPUID != bfin_cpuid())) - printk(KERN_ERR "ERROR: Not running on ADSP-%s: unknown CPUID 0x%04x Rev 0.%d\n", - CPU, bfin_cpuid(), bfin_revid()); - else { + if (likely(CPUID == bfin_cpuid())) { if (bfin_revid() != bfin_compiled_revid()) { if (bfin_compiled_revid() == -1) printk(KERN_ERR "Warning: Compiled for Rev none, but running on Rev %d\n", -- cgit v1.1 From 986d6c1e05642edac81cb8cc99f36a26d16ef220 Mon Sep 17 00:00:00 2001 From: Yi Li <yi.li@analog.com> Date: Fri, 19 Jun 2009 08:51:11 +0000 Subject: Blackfin: drop BF535-specific text for exception 0x2A (unaligned instruction) We don't support the BF535 at all, and the exception 0x2A text specific to it is pretty verbose and confusing (since the behavior is simply odd), so punt it to keep the noise down. Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- arch/blackfin/include/asm/traps.h | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/include/asm/traps.h b/arch/blackfin/include/asm/traps.h index 34f7295..3cdc454 100644 --- a/arch/blackfin/include/asm/traps.h +++ b/arch/blackfin/include/asm/traps.h @@ -111,9 +111,7 @@ level " bits in the Watchpoint Instruction Address Control register (WPIACTL) is set.\n" #define EXC_0x2A(level) \ "Instruction fetch misaligned address violation\n" \ - level " - Attempted misaligned instruction cache fetch. On a misaligned instruction fetch\n" \ - level " exception, the return address provided in RETX is the destination address which is\n" \ - level " misaligned, rather than the address of the offending instruction.\n" + level " - Attempted misaligned instruction cache fetch.\n" #define EXC_0x2B(level) \ "CPLB protection violation\n" \ level " - Illegal instruction fetch access (memory protection violation).\n" -- cgit v1.1 From 5ecf3e03cd513e8dba080d389b56bac11a2b0d8a Mon Sep 17 00:00:00 2001 From: Mike Frysinger <vapier@gentoo.org> Date: Fri, 19 Jun 2009 18:56:57 -0400 Subject: Blackfin: hook up new perf_counter_open syscall Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- arch/blackfin/include/asm/unistd.h | 3 ++- arch/blackfin/mach-common/entry.S | 1 + 2 files changed, 3 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/blackfin/include/asm/unistd.h b/arch/blackfin/include/asm/unistd.h index da35133..c8e7ee4 100644 --- a/arch/blackfin/include/asm/unistd.h +++ b/arch/blackfin/include/asm/unistd.h @@ -381,8 +381,9 @@ #define __NR_preadv 366 #define __NR_pwritev 367 #define __NR_rt_tgsigqueueinfo 368 +#define __NR_perf_counter_open 369 -#define __NR_syscall 369 +#define __NR_syscall 370 #define NR_syscalls __NR_syscall /* Old optional stuff no one actually uses */ diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index 31fa313..5a4e7c7 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -1609,6 +1609,7 @@ ENTRY(_sys_call_table) .long _sys_preadv .long _sys_pwritev .long _sys_rt_tgsigqueueinfo + .long _sys_perf_counter_open .rept NR_syscalls-(.-_sys_call_table)/4 .long _sys_ni_syscall -- cgit v1.1 From 42b86e06c7db365f1947dda9b75317cbb3c9fb5b Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Date: Mon, 22 Jun 2009 21:48:37 -0400 Subject: Blackfin: fix dma-mapping build errors The recent deprecation of dma_sync_{sg,single} ironically broke Blackfin systems. This is because we don't define dma_sync_sg_for_cpu at all, so until the DMA asm-generic conversion/cleanup is done after the next release, simply stub out the dma_sync_sg_for_{cpu,device} functions. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- arch/blackfin/include/asm/dma-mapping.h | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'arch') diff --git a/arch/blackfin/include/asm/dma-mapping.h b/arch/blackfin/include/asm/dma-mapping.h index d7d9148..ed6b1f3 100644 --- a/arch/blackfin/include/asm/dma-mapping.h +++ b/arch/blackfin/include/asm/dma-mapping.h @@ -95,4 +95,17 @@ static inline void dma_sync_single_for_device(struct device *dev, enum dma_data_direction dir) { } + +static inline void dma_sync_sg_for_cpu(struct device *dev, + struct scatterlist *sg, + int nents, enum dma_data_direction dir) +{ +} + +static inline void dma_sync_sg_for_device(struct device *dev, + struct scatterlist *sg, + int nents, enum dma_data_direction dir) +{ +} + #endif /* _BLACKFIN_DMA_MAPPING_H */ -- cgit v1.1 From 7b994836f09fc3ce7d073ad6f8259a1a84003e02 Mon Sep 17 00:00:00 2001 From: Roel Kluin <[mailto:roel.kluin@gmail.com]> Date: Tue, 23 Jun 2009 10:04:14 +0200 Subject: CRISv10: remove redundant tests on unsigned Since dmanr is unsigned, negatives are wrapped and caught by the other test. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> --- arch/cris/arch-v10/kernel/dma.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/cris/arch-v10/kernel/dma.c b/arch/cris/arch-v10/kernel/dma.c index 929e686..d31504b 100644 --- a/arch/cris/arch-v10/kernel/dma.c +++ b/arch/cris/arch-v10/kernel/dma.c @@ -24,7 +24,7 @@ int cris_request_dma(unsigned int dmanr, const char * device_id, unsigned long int gens; int fail = -EINVAL; - if ((dmanr < 0) || (dmanr >= MAX_DMA_CHANNELS)) { + if (dmanr >= MAX_DMA_CHANNELS) { printk(KERN_CRIT "cris_request_dma: invalid DMA channel %u\n", dmanr); return -EINVAL; } @@ -213,7 +213,7 @@ int cris_request_dma(unsigned int dmanr, const char * device_id, void cris_free_dma(unsigned int dmanr, const char * device_id) { unsigned long flags; - if ((dmanr < 0) || (dmanr >= MAX_DMA_CHANNELS)) { + if (dmanr >= MAX_DMA_CHANNELS) { printk(KERN_CRIT "cris_free_dma: invalid DMA channel %u\n", dmanr); return; } -- cgit v1.1 From 2e046b9487dcc60707cac77fb8f744ec830209cd Mon Sep 17 00:00:00 2001 From: Paul Mundt <lethal@linux-sh.org> Date: Fri, 19 Jun 2009 14:40:51 +0900 Subject: sh: Provide cpu_idle_wait() to fix up cpuidle/SMP build. Crib the x86 cpu_idle_wait() implementation and shove it in with the idle code, subsequently enabling ARCH_HAS_CPU_IDLE_WAIT. Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/Kconfig | 3 +++ arch/sh/include/asm/system.h | 1 + arch/sh/kernel/idle.c | 23 ++++++++++++++++++++++- 3 files changed, 26 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index ac1c620..09c0aef 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -151,6 +151,9 @@ config ARCH_NO_VIRT_TO_BUS config ARCH_HAS_DEFAULT_IDLE def_bool y +config ARCH_HAS_CPU_IDLE_WAIT + def_bool y + config IO_TRAPPED bool diff --git a/arch/sh/include/asm/system.h b/arch/sh/include/asm/system.h index a88895e..ab79e1f 100644 --- a/arch/sh/include/asm/system.h +++ b/arch/sh/include/asm/system.h @@ -154,6 +154,7 @@ extern struct dentry *sh_debugfs_root; void per_cpu_trap_init(void); void default_idle(void); +void cpu_idle_wait(void); asmlinkage void break_point_trap(void); diff --git a/arch/sh/kernel/idle.c b/arch/sh/kernel/idle.c index f35ed03..27ff2dc 100644 --- a/arch/sh/kernel/idle.c +++ b/arch/sh/kernel/idle.c @@ -1,7 +1,7 @@ /* * The idle loop for all SuperH platforms. * - * Copyright (C) 2002 - 2008 Paul Mundt + * Copyright (C) 2002 - 2009 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -15,6 +15,7 @@ #include <linux/preempt.h> #include <linux/thread_info.h> #include <linux/irqflags.h> +#include <linux/smp.h> #include <asm/pgalloc.h> #include <asm/system.h> #include <asm/atomic.h> @@ -79,3 +80,23 @@ void cpu_idle(void) check_pgt_cache(); } } + +static void do_nothing(void *unused) +{ +} + +/* + * cpu_idle_wait - Used to ensure that all the CPUs discard old value of + * pm_idle and update to new pm_idle value. Required while changing pm_idle + * handler on SMP systems. + * + * Caller must have changed pm_idle to the new value before the call. Old + * pm_idle value will not be used by any CPU after the return of this function. + */ +void cpu_idle_wait(void) +{ + smp_mb(); + /* kick all the CPUs so that they exit out of pm_idle */ + smp_call_function(do_nothing, NULL, 1); +} +EXPORT_SYMBOL_GPL(cpu_idle_wait); -- cgit v1.1 From 997d0030934f7722d81e5b1cdd7af85ac7ed960b Mon Sep 17 00:00:00 2001 From: Paul Mundt <lethal@linux-sh.org> Date: Fri, 19 Jun 2009 15:37:11 +0900 Subject: sh: Use local TLB flush in set_pte_phys(). set_pte_phys() presently uses the global flush_tlb_one(), which locks on SMP trying to do the IPI. As we have not even initialized the other CPUs at this point, switch to the local_ variant so the flush happens on the boot CPU. Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/mm/init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c index ee8e6bb..d1be042 100644 --- a/arch/sh/mm/init.c +++ b/arch/sh/mm/init.c @@ -70,7 +70,7 @@ static void set_pte_phys(unsigned long addr, unsigned long phys, pgprot_t prot) } set_pte(pte, pfn_pte(phys >> PAGE_SHIFT, prot)); - flush_tlb_one(get_asid(), addr); + local_flush_tlb_one(get_asid(), addr); } /* -- cgit v1.1 From b29fa1fbc210a51103c7a16af44df42cadce0361 Mon Sep 17 00:00:00 2001 From: Paul Mundt <lethal@linux-sh.org> Date: Fri, 19 Jun 2009 15:39:47 +0900 Subject: sh: Wire up the uncached fixmap on sh64 as well. Now that sh64 also can use the uncached section, wire up the fixmap for it as well. Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/mm/init.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c index d1be042..fe532ae 100644 --- a/arch/sh/mm/init.c +++ b/arch/sh/mm/init.c @@ -177,10 +177,8 @@ void __init paging_init(void) free_area_init_nodes(max_zone_pfns); -#ifdef CONFIG_SUPERH32 /* Set up the uncached fixmap */ set_fixmap_nocache(FIX_UNCACHED, __pa(&__uncached_start)); -#endif } static struct kcore_list kcore_mem, kcore_vmalloc; -- cgit v1.1 From 2eb2a4368273e123d2716a704c86f3130aa14c22 Mon Sep 17 00:00:00 2001 From: Paul Mundt <lethal@linux-sh.org> Date: Fri, 19 Jun 2009 16:00:00 +0900 Subject: sh: SH7786 SMP support. SH7786 is roughly identical to SH-X3 proto SMP, though there are only 2 CPUs. This just wraps in to the existing SH-X3 SMP code with some minor changes for SH7786, including wiring up the IPIs properly, enabling IRQ_PER_CPU, and so forth. Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/Kconfig | 7 ++++++- arch/sh/kernel/cpu/sh4a/Makefile | 6 +++--- arch/sh/kernel/cpu/sh4a/setup-sh7786.c | 29 +++++++++-------------------- 3 files changed, 18 insertions(+), 24 deletions(-) (limited to 'arch') diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 09c0aef..eff0f23 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -71,6 +71,9 @@ config GENERIC_HARDIRQS_NO__DO_IRQ config GENERIC_IRQ_PROBE def_bool y +config IRQ_PER_CPU + def_bool y + config GENERIC_GPIO def_bool n @@ -414,6 +417,8 @@ config CPU_SUBTYPE_SH7786 select CPU_HAS_PTEAEX select ARCH_SPARSEMEM_ENABLE select SYS_SUPPORTS_NUMA + select SYS_SUPPORTS_SMP + select GENERIC_CLOCKEVENTS_BROADCAST if SMP config CPU_SUBTYPE_SHX3 bool "Support SH-X3 processor" @@ -651,7 +656,7 @@ config NR_CPUS int "Maximum number of CPUs (2-32)" range 2 32 depends on SMP - default "4" if CPU_SHX3 + default "4" if CPU_SUBTYPE_SHX3 default "2" help This allows you to specify the maximum number of CPUs which this diff --git a/arch/sh/kernel/cpu/sh4a/Makefile b/arch/sh/kernel/cpu/sh4a/Makefile index 96ea09c..ebdd391 100644 --- a/arch/sh/kernel/cpu/sh4a/Makefile +++ b/arch/sh/kernel/cpu/sh4a/Makefile @@ -16,7 +16,7 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7366) += setup-sh7366.o obj-$(CONFIG_CPU_SUBTYPE_SHX3) += setup-shx3.o # SMP setup -smp-$(CONFIG_CPU_SUBTYPE_SHX3) := smp-shx3.o +smp-$(CONFIG_CPU_SHX3) := smp-shx3.o # Primary on-chip clocks (common) clock-$(CONFIG_CPU_SUBTYPE_SH7763) := clock-sh7763.o @@ -38,6 +38,6 @@ pinmux-$(CONFIG_CPU_SUBTYPE_SH7724) := pinmux-sh7724.o pinmux-$(CONFIG_CPU_SUBTYPE_SH7785) := pinmux-sh7785.o pinmux-$(CONFIG_CPU_SUBTYPE_SH7786) := pinmux-sh7786.o -obj-y += $(clock-y) -obj-$(CONFIG_SMP) += $(smp-y) +obj-y += $(clock-y) +obj-$(CONFIG_SMP) += $(smp-y) obj-$(CONFIG_GENERIC_GPIO) += $(pinmux-y) diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c index 93e0d2c..b700494 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c @@ -595,9 +595,8 @@ enum { HSPI, GPIO0, GPIO1, Thermal, - INTC0, INTC1, INTC2, INTC3, INTC4, INTC5, INTC6, INTC7, - - /* interrupt groups */ + INTICI0, INTICI1, INTICI2, INTICI3, + INTICI4, INTICI5, INTICI6, INTICI7, }; static struct intc_vect vectors[] __initdata = { @@ -638,10 +637,12 @@ static struct intc_vect vectors[] __initdata = { INTC_VECT(HSPI, 0xe80), INTC_VECT(GPIO0, 0xea0), INTC_VECT(GPIO1, 0xec0), INTC_VECT(Thermal, 0xee0), + INTC_VECT(INTICI0, 0xf00), INTC_VECT(INTICI1, 0xf20), + INTC_VECT(INTICI2, 0xf40), INTC_VECT(INTICI3, 0xf60), + INTC_VECT(INTICI4, 0xf80), INTC_VECT(INTICI5, 0xfa0), + INTC_VECT(INTICI6, 0xfc0), INTC_VECT(INTICI7, 0xfe0), }; -/* FIXME: Main CPU support only now */ -#if 1 /* Main CPU */ #define CnINTMSK0 0xfe410030 #define CnINTMSK1 0xfe410040 #define CnINTMSKCLR0 0xfe410050 @@ -654,21 +655,6 @@ static struct intc_vect vectors[] __initdata = { #define CnINT2MSKCR1 0xfe410a34 #define CnINT2MSKCR2 0xfe410a38 #define CnINT2MSKCR3 0xfe410a3c -#else /* Sub CPU */ -#define CnINTMSK0 0xfe410034 -#define CnINTMSK1 0xfe410044 -#define CnINTMSKCLR0 0xfe410054 -#define CnINTMSKCLR1 0xfe410064 -#define CnINT2MSKR0 0xfe410b20 -#define CnINT2MSKR1 0xfe410b24 -#define CnINT2MSKR2 0xfe410b28 -#define CnINT2MSKR3 0xfe410b2c -#define CnINT2MSKCR0 0xfe410b30 -#define CnINT2MSKCR1 0xfe410b34 -#define CnINT2MSKCR2 0xfe410b38 -#define CnINT2MSKCR3 0xfe410b3c -#endif - #define INTMSK2 0xfe410068 #define INTMSKCLR2 0xfe41006c @@ -753,6 +739,9 @@ static struct intc_prio_reg prio_registers[] __initdata = { GPIO1, Thermal } }, { 0xfe41085c, 0, 32, 8, /* INT2PRI23 */ { 0, 0, 0, 0 } }, { 0xfe410860, 0, 32, 8, /* INT2PRI24 */ { 0, 0, 0, 0 } }, + { 0xfe410090, 0xfe4100a0, 32, 4, /* CnICIPRI / CnICIPRICLR */ + { INTICI7, INTICI6, INTICI5, INTICI4, + INTICI3, INTICI2, INTICI1, INTICI0 }, INTC_SMP(4, 2) }, }; static DECLARE_INTC_DESC(intc_desc, "sh7786", vectors, NULL, -- cgit v1.1 From 854c879f5abf309ebd378bea1ee41acf4ddf7194 Mon Sep 17 00:00:00 2001 From: Pekka J Enberg <penberg@cs.helsinki.fi> Date: Mon, 22 Jun 2009 17:39:41 +0300 Subject: x86: Move init_gbpages() to setup_arch() The init_gbpages() function is conditionally called from init_memory_mapping() function. There are two call-sites where this 'after_bootmem' condition can be true: setup_arch() and mem_init() via pci_iommu_alloc(). Therefore, it's safe to move the call to init_gbpages() to setup_arch() as it's always called before mem_init(). This removes an after_bootmem use - paving the way to remove all uses of that state variable. Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Acked-by: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <Pine.LNX.4.64.0906221731210.19474@melkki.cs.Helsinki.FI> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/kernel/setup.c | 16 ++++++++++++++++ arch/x86/mm/init.c | 17 ----------------- 2 files changed, 16 insertions(+), 17 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index be5ae80..de2cab1 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -289,6 +289,20 @@ void * __init extend_brk(size_t size, size_t align) return ret; } +#ifdef CONFIG_X86_64 +static void __init init_gbpages(void) +{ + if (direct_gbpages && cpu_has_gbpages) + printk(KERN_INFO "Using GB pages for direct mapping\n"); + else + direct_gbpages = 0; +} +#else +static inline void init_gbpages(void) +{ +} +#endif + static void __init reserve_brk(void) { if (_brk_end > _brk_start) @@ -871,6 +885,8 @@ void __init setup_arch(char **cmdline_p) reserve_brk(); + init_gbpages(); + /* max_pfn_mapped is updated here */ max_low_pfn_mapped = init_memory_mapping(0, max_low_pfn<<PAGE_SHIFT); max_pfn_mapped = max_low_pfn_mapped; diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c index f53b57e..47ce9a2 100644 --- a/arch/x86/mm/init.c +++ b/arch/x86/mm/init.c @@ -177,20 +177,6 @@ static int __meminit save_mr(struct map_range *mr, int nr_range, return nr_range; } -#ifdef CONFIG_X86_64 -static void __init init_gbpages(void) -{ - if (direct_gbpages && cpu_has_gbpages) - printk(KERN_INFO "Using GB pages for direct mapping\n"); - else - direct_gbpages = 0; -} -#else -static inline void init_gbpages(void) -{ -} -#endif - /* * Setup the direct mapping of the physical memory at PAGE_OFFSET. * This runs before bootmem is initialized and gets pages directly from @@ -210,9 +196,6 @@ unsigned long __init_refok init_memory_mapping(unsigned long start, printk(KERN_INFO "init_memory_mapping: %016lx-%016lx\n", start, end); - if (!after_bootmem) - init_gbpages(); - #if defined(CONFIG_DEBUG_PAGEALLOC) || defined(CONFIG_KMEMCHECK) /* * For CONFIG_DEBUG_PAGEALLOC, identity mapping will use small pages. -- cgit v1.1 From 971121f27179508beb18b86b84e1f8399d7b3875 Mon Sep 17 00:00:00 2001 From: Paul Mundt <lethal@linux-sh.org> Date: Tue, 23 Jun 2009 17:36:23 +0900 Subject: sh: Fix up more dma-mapping fallout. commit dbe6f1869188b6e04e38aa861dd198befb08bcd7 ("dma-mapping: mark dma_sync_single and dma_sync_sg as deprecated" conveniently broke every single SH build. In the future it would be great if people could at least bother figuring out how to use grep. Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/include/asm/dma-mapping.h | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/sh/include/asm/dma-mapping.h b/arch/sh/include/asm/dma-mapping.h index ea9d4f4..69d56dd 100644 --- a/arch/sh/include/asm/dma-mapping.h +++ b/arch/sh/include/asm/dma-mapping.h @@ -97,7 +97,7 @@ static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address, dma_unmap_single(dev, dma_address, size, dir); } -static inline void dma_sync_single(struct device *dev, dma_addr_t dma_handle, +static inline void __dma_sync_single(struct device *dev, dma_addr_t dma_handle, size_t size, enum dma_data_direction dir) { #if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT) @@ -119,7 +119,7 @@ static inline void dma_sync_single_range(struct device *dev, dma_cache_sync(dev, phys_to_virt(dma_handle) + offset, size, dir); } -static inline void dma_sync_sg(struct device *dev, struct scatterlist *sg, +static inline void __dma_sync_sg(struct device *dev, struct scatterlist *sg, int nelems, enum dma_data_direction dir) { int i; @@ -137,7 +137,7 @@ static inline void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size, enum dma_data_direction dir) { - dma_sync_single(dev, dma_handle, size, dir); + __dma_sync_single(dev, dma_handle, size, dir); debug_dma_sync_single_for_cpu(dev, dma_handle, size, dir); } @@ -146,7 +146,7 @@ static inline void dma_sync_single_for_device(struct device *dev, size_t size, enum dma_data_direction dir) { - dma_sync_single(dev, dma_handle, size, dir); + __dma_sync_single(dev, dma_handle, size, dir); debug_dma_sync_single_for_device(dev, dma_handle, size, dir); } @@ -177,7 +177,7 @@ static inline void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems, enum dma_data_direction dir) { - dma_sync_sg(dev, sg, nelems, dir); + __dma_sync_sg(dev, sg, nelems, dir); debug_dma_sync_sg_for_cpu(dev, sg, nelems, dir); } @@ -185,7 +185,7 @@ static inline void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems, enum dma_data_direction dir) { - dma_sync_sg(dev, sg, nelems, dir); + __dma_sync_sg(dev, sg, nelems, dir); debug_dma_sync_sg_for_device(dev, sg, nelems, dir); } -- cgit v1.1 From 0c405b3346ea08098a82a1ee82912b018dfa9f96 Mon Sep 17 00:00:00 2001 From: Jonathan McDowell <noodles@earth.li> Date: Tue, 23 Jun 2009 13:30:21 +0300 Subject: OMAP1: Fix compilation of arch/arm/mach-omap1/mailbox.c This fixes the positioning of " in MODULE_AUTHOR, which is currently causing a build failure on latest git with CONFIG_OMAP_MBOX_FWK=m; the original breakage appears to date from the end of last year in a5abbbe52b7e89a7633319c5417bd4331f7ac8ed Signed-Off-By: Jonathan McDowell <noodles@earth.li> Acked-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com> --- arch/arm/mach-omap1/mailbox.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/mailbox.c b/arch/arm/mach-omap1/mailbox.c index 0af4d6c..6810b4a 100644 --- a/arch/arm/mach-omap1/mailbox.c +++ b/arch/arm/mach-omap1/mailbox.c @@ -203,5 +203,5 @@ module_exit(omap1_mbox_exit); MODULE_LICENSE("GPL v2"); MODULE_DESCRIPTION("omap mailbox: omap1 architecture specific functions"); -MODULE_AUTHOR("Hiroshi DOYU" <Hiroshi.DOYU@nokia.com>); +MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>"); MODULE_ALIAS("platform:omap1-mailbox"); -- cgit v1.1 From e4d24ec39c98cdc9cd97c26fdd426bbab0034fbe Mon Sep 17 00:00:00 2001 From: Andrew de Quincey <adq_dvb@lidskialf.net> Date: Tue, 23 Jun 2009 13:30:21 +0300 Subject: OMAP1: Fix N770 MMC support Some of the N770's MMC configuration options seem to have been dropped. This patch adds them back in again. Note that only the .ocr_mask change was /critical/, but I've added the .max_freq setting back as well, as the original sources had it. Can anyone confirm if this is unnecessary? Secondly, there is support in the original code for a 4wire/higher speed mode. As I don't have the requisite N770 hardware (I think it was a rev2 N770?) to test this, I can't really add it back. Signed-off-by: Andrew de Quincey <adq@lidskialf.net> Signed-off-by: Tony Lindgren <tony@atomide.com> --- arch/arm/mach-omap1/board-nokia770.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index e70fc7c..d9ebba0 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -205,9 +205,11 @@ static int nokia770_mmc_get_cover_state(struct device *dev, int slot) static struct omap_mmc_platform_data nokia770_mmc2_data = { .nr_slots = 1, .dma_mask = 0xffffffff, + .max_freq = 12000000, .slots[0] = { .set_power = nokia770_mmc_set_power, .get_cover_state = nokia770_mmc_get_cover_state, + .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, .name = "mmcblk", }, }; -- cgit v1.1 From d376f89701b0aa5b45d25fbfbeb1a0040399ad30 Mon Sep 17 00:00:00 2001 From: Huang Weiyi <weiyi.huang@gmail.com> Date: Tue, 23 Jun 2009 13:30:22 +0300 Subject: OMAP1: remove duplicated #include Remove duplicated #include in arch/arm/mach-omap1/board-nokia770.c. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> --- arch/arm/mach-omap1/board-nokia770.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index d9ebba0..ed2a48a 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -36,7 +36,6 @@ #include <mach/hwa742.h> #include <mach/lcd_mipid.h> #include <mach/mmc.h> -#include <mach/usb.h> #include <mach/clock.h> #define ADS7846_PENDOWN_GPIO 15 -- cgit v1.1 From 762ad3a476baa1831f732488e80960f4aa024393 Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas <notasas@gmail.com> Date: Tue, 23 Jun 2009 13:30:22 +0300 Subject: OMAP2/3: mmc-twl4030: use correct controller in twl_mmc23_set_power twl_mmc23_set_power() has MMC2 twl_mmc_controller hardcoded in it, which breaks MMC3. Find the right controller to use instead. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Tony Lindgren <tony@atomide.com> --- arch/arm/mach-omap2/mmc-twl4030.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c index 9756a87..1541fd4 100644 --- a/arch/arm/mach-omap2/mmc-twl4030.c +++ b/arch/arm/mach-omap2/mmc-twl4030.c @@ -263,8 +263,19 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on, static int twl_mmc23_set_power(struct device *dev, int slot, int power_on, int vdd) { int ret = 0; - struct twl_mmc_controller *c = &hsmmc[1]; + struct twl_mmc_controller *c = NULL; struct omap_mmc_platform_data *mmc = dev->platform_data; + int i; + + for (i = 1; i < ARRAY_SIZE(hsmmc); i++) { + if (mmc == hsmmc[i].mmc) { + c = &hsmmc[i]; + break; + } + } + + if (c == NULL) + return -ENODEV; /* If we don't see a Vcc regulator, assume it's a fixed * voltage always-on regulator. -- cgit v1.1 From 091a58af0ba1765d80b1e74382c7572baceb1bdc Mon Sep 17 00:00:00 2001 From: Roel Kluin <roel.kluin@gmail.com> Date: Tue, 23 Jun 2009 13:30:22 +0300 Subject: OMAP2/3: omap mailbox: platform_get_irq() error ignored platform_get_irq may return -ENXIO. but struct omap_mbox mbox_dsp_info.irq is unsigned, so the error was not noticed. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com> --- arch/arm/mach-omap2/mailbox.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c index fd5b8a5..6f71f37 100644 --- a/arch/arm/mach-omap2/mailbox.c +++ b/arch/arm/mach-omap2/mailbox.c @@ -282,12 +282,12 @@ static int __devinit omap2_mbox_probe(struct platform_device *pdev) return -ENOMEM; /* DSP or IVA2 IRQ */ - mbox_dsp_info.irq = platform_get_irq(pdev, 0); - if (mbox_dsp_info.irq < 0) { + ret = platform_get_irq(pdev, 0); + if (ret < 0) { dev_err(&pdev->dev, "invalid irq resource\n"); - ret = -ENODEV; goto err_dsp; } + mbox_dsp_info.irq = ret; ret = omap_mbox_register(&pdev->dev, &mbox_dsp_info); if (ret) -- cgit v1.1 From 8e25ad964aac0bf6b30dd013303750089f819679 Mon Sep 17 00:00:00 2001 From: Kevin Hilman <khilman@deeprootsystems.com> Date: Tue, 23 Jun 2009 13:30:23 +0300 Subject: OMAP2/3: Add omap_type() for determining GP/EMU/HS The omap_type() function is added and returns the DEVICETYPE field of the CONTROL_STATUS register. The result can be used for conditional code based on whether device is GP (general purpose), EMU or HS (high security). Also move the type defines so omap1 code compile does not require ifdefs for sections using these defines. This code is needed for the following fix to set the SRAM size correctly for HS omaps. Also at least PM and watchdog code will need this function. Signed-off-by: Kevin Hilman <khilman@ti.deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com> --- arch/arm/mach-omap2/id.c | 22 ++++++++++++++++++++++ arch/arm/plat-omap/include/mach/cpu.h | 22 +++++++++++----------- 2 files changed, 33 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 458990e..a98201c 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -48,6 +48,28 @@ int omap_chip_is(struct omap_chip_id oci) } EXPORT_SYMBOL(omap_chip_is); +int omap_type(void) +{ + u32 val = 0; + + if (cpu_is_omap24xx()) + val = omap_ctrl_readl(OMAP24XX_CONTROL_STATUS); + else if (cpu_is_omap34xx()) + val = omap_ctrl_readl(OMAP343X_CONTROL_STATUS); + else { + pr_err("Cannot detect omap type!\n"); + goto out; + } + + val &= OMAP2_DEVICETYPE_MASK; + val >>= 8; + +out: + return val; +} +EXPORT_SYMBOL(omap_type); + + /*----------------------------------------------------------------------------*/ #define OMAP_TAP_IDCODE 0x0204 diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h index fc60c4e..285eaa3 100644 --- a/arch/arm/plat-omap/include/mach/cpu.h +++ b/arch/arm/plat-omap/include/mach/cpu.h @@ -30,6 +30,17 @@ #ifndef __ASM_ARCH_OMAP_CPU_H #define __ASM_ARCH_OMAP_CPU_H +/* + * Omap device type i.e. EMU/HS/TST/GP/BAD + */ +#define OMAP2_DEVICE_TYPE_TEST 0 +#define OMAP2_DEVICE_TYPE_EMU 1 +#define OMAP2_DEVICE_TYPE_SEC 2 +#define OMAP2_DEVICE_TYPE_GP 3 +#define OMAP2_DEVICE_TYPE_BAD 4 + +int omap_type(void); + struct omap_chip_id { u8 oc; u8 type; @@ -424,17 +435,6 @@ IS_OMAP_TYPE(3430, 0x3430) int omap_chip_is(struct omap_chip_id oci); -int omap_type(void); - -/* - * Macro to detect device type i.e. EMU/HS/TST/GP/BAD - */ -#define OMAP2_DEVICE_TYPE_TEST 0 -#define OMAP2_DEVICE_TYPE_EMU 1 -#define OMAP2_DEVICE_TYPE_SEC 2 -#define OMAP2_DEVICE_TYPE_GP 3 -#define OMAP2_DEVICE_TYPE_BAD 4 - void omap2_check_revision(void); #endif /* defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) */ -- cgit v1.1 From 5b0acc59d1bc5c310dfd6976555664f9dcf4dacd Mon Sep 17 00:00:00 2001 From: Tero Kristo <tero.kristo@nokia.com> Date: Tue, 23 Jun 2009 13:30:23 +0300 Subject: OMAP3: SRAM size fix for HS/EMU devices SRAM size fix for HS/EMU devices Signed-off-by: Tero Kristo <tero.kristo@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com> --- arch/arm/plat-omap/sram.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 65006df..4ea7380 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -133,7 +133,12 @@ void __init omap_detect_sram(void) if (cpu_is_omap34xx()) { omap_sram_base = OMAP3_SRAM_PUB_VA; omap_sram_start = OMAP3_SRAM_PUB_PA; - omap_sram_size = 0x8000; /* 32K */ + if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) || + (omap_type() == OMAP2_DEVICE_TYPE_SEC)) { + omap_sram_size = 0x7000; /* 28K */ + } else { + omap_sram_size = 0x8000; /* 32K */ + } } else { omap_sram_base = OMAP2_SRAM_PUB_VA; omap_sram_start = OMAP2_SRAM_PUB_PA; -- cgit v1.1 From aecedb94b366d6fb5e2a17ca18a5dc78e593198e Mon Sep 17 00:00:00 2001 From: Kalle Jokiniemi <ext-kalle.jokiniemi@nokia.com> Date: Tue, 23 Jun 2009 13:30:24 +0300 Subject: OMAP3: DMA: Enable idlemodes for DMA OCP This patch enables MStandby smart-idle mode, autoidle smartidle mode, and the autoidle bit for DMA4_OCP_SYSCONFIG. Signed-off-by: Kalle Jokiniemi <ext-kalle.jokiniemi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kevin Hilman <khilman@ti.deeprootsystems.com> --- arch/arm/plat-omap/dma.c | 13 +++++++++++++ arch/arm/plat-omap/include/mach/dma.h | 15 +++++++++++++++ 2 files changed, 28 insertions(+) (limited to 'arch') diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index def14ec..7677a4a 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -2457,6 +2457,19 @@ static int __init omap_init_dma(void) setup_irq(irq, &omap24xx_dma_irq); } + /* Enable smartidle idlemodes and autoidle */ + if (cpu_is_omap34xx()) { + u32 v = dma_read(OCP_SYSCONFIG); + v &= ~(DMA_SYSCONFIG_MIDLEMODE_MASK | + DMA_SYSCONFIG_SIDLEMODE_MASK | + DMA_SYSCONFIG_AUTOIDLE); + v |= (DMA_SYSCONFIG_MIDLEMODE(DMA_IDLEMODE_SMARTIDLE) | + DMA_SYSCONFIG_SIDLEMODE(DMA_IDLEMODE_SMARTIDLE) | + DMA_SYSCONFIG_AUTOIDLE); + dma_write(v , OCP_SYSCONFIG); + } + + /* FIXME: Update LCD DMA to work on 24xx */ if (cpu_class_is_omap1()) { r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0, diff --git a/arch/arm/plat-omap/include/mach/dma.h b/arch/arm/plat-omap/include/mach/dma.h index 8c1eae8..7b939cc 100644 --- a/arch/arm/plat-omap/include/mach/dma.h +++ b/arch/arm/plat-omap/include/mach/dma.h @@ -389,6 +389,21 @@ #define DMA_THREAD_FIFO_25 (0x02 << 14) #define DMA_THREAD_FIFO_50 (0x03 << 14) +/* DMA4_OCP_SYSCONFIG bits */ +#define DMA_SYSCONFIG_MIDLEMODE_MASK (3 << 12) +#define DMA_SYSCONFIG_CLOCKACTIVITY_MASK (3 << 8) +#define DMA_SYSCONFIG_EMUFREE (1 << 5) +#define DMA_SYSCONFIG_SIDLEMODE_MASK (3 << 3) +#define DMA_SYSCONFIG_SOFTRESET (1 << 2) +#define DMA_SYSCONFIG_AUTOIDLE (1 << 0) + +#define DMA_SYSCONFIG_MIDLEMODE(n) ((n) << 12) +#define DMA_SYSCONFIG_SIDLEMODE(n) ((n) << 3) + +#define DMA_IDLEMODE_SMARTIDLE 0x2 +#define DMA_IDLEMODE_NO_IDLE 0x1 +#define DMA_IDLEMODE_FORCE_IDLE 0x0 + /* Chaining modes*/ #ifndef CONFIG_ARCH_OMAP1 #define OMAP_DMA_STATIC_CHAIN 0x1 -- cgit v1.1 From 6d453e84b587f38e4197bb2c6a37296c4a80cbac Mon Sep 17 00:00:00 2001 From: Adrian Hunter <adrian.hunter@nokia.com> Date: Tue, 23 Jun 2009 13:30:24 +0300 Subject: OMAP2/3: gpmc-onenand: correct use of async timings Use async timings when sync timings are not requested. Also ensure that OneNAND is in async mode when async timings are used. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com> --- arch/arm/mach-omap2/gpmc-onenand.c | 21 +++++++++++++++++++-- 1 file changed, 19 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c index 2fd22f9..54fec53 100644 --- a/arch/arm/mach-omap2/gpmc-onenand.c +++ b/arch/arm/mach-omap2/gpmc-onenand.c @@ -31,6 +31,8 @@ static struct platform_device gpmc_onenand_device = { static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base) { struct gpmc_timings t; + u32 reg; + int err; const int t_cer = 15; const int t_avdp = 12; @@ -43,6 +45,11 @@ static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base) const int t_wpl = 40; const int t_wph = 30; + /* Ensure sync read and sync write are disabled */ + reg = readw(onenand_base + ONENAND_REG_SYS_CFG1); + reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE; + writew(reg, onenand_base + ONENAND_REG_SYS_CFG1); + memset(&t, 0, sizeof(t)); t.sync_clk = 0; t.cs_on = 0; @@ -74,7 +81,16 @@ static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base) GPMC_CONFIG1_DEVICESIZE_16 | GPMC_CONFIG1_MUXADDDATA); - return gpmc_cs_set_timings(cs, &t); + err = gpmc_cs_set_timings(cs, &t); + if (err) + return err; + + /* Ensure sync read and sync write are disabled */ + reg = readw(onenand_base + ONENAND_REG_SYS_CFG1); + reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE; + writew(reg, onenand_base + ONENAND_REG_SYS_CFG1); + + return 0; } static void set_onenand_cfg(void __iomem *onenand_base, int latency, @@ -124,7 +140,8 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, } else if (cfg->flags & ONENAND_SYNC_READWRITE) { sync_read = 1; sync_write = 1; - } + } else + return omap2_onenand_set_async_mode(cs, onenand_base); if (!freq) { /* Very first call freq is not known */ -- cgit v1.1 From c8e6488f7b56d82453fc7d526118e9f1c2df133a Mon Sep 17 00:00:00 2001 From: Adrian Hunter <adrian.hunter@nokia.com> Date: Tue, 23 Jun 2009 13:30:25 +0300 Subject: OMAP3: RX51: Use OneNAND sync read / write Use OneNAND sync read / write Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com> --- arch/arm/mach-omap2/board-rx51-peripherals.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index da93b86..9a0bf67 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -362,6 +362,7 @@ static struct omap_onenand_platform_data board_onenand_data = { .gpio_irq = 65, .parts = onenand_partitions, .nr_parts = ARRAY_SIZE(onenand_partitions), + .flags = ONENAND_SYNC_READWRITE, }; static void __init board_onenand_init(void) -- cgit v1.1 From f48ef99ca14577f3ea0a48c0e05ed7f5f6d211e9 Mon Sep 17 00:00:00 2001 From: Fernando Guzman Lugo <x0095840@ti.com> Date: Tue, 23 Jun 2009 13:30:25 +0300 Subject: OMAP: IOMMU: function flush_iotlb_page is not flushing correct entry The function flush_iotlb_page is not loading the CAM register with the correct entry to be flushed, so it is flushing other entry Signed-off-by: Fernando Guzman Lugo <x0095840@ti.com> Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com> --- arch/arm/plat-omap/iommu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c index 4cf449f..4a03013 100644 --- a/arch/arm/plat-omap/iommu.c +++ b/arch/arm/plat-omap/iommu.c @@ -298,7 +298,7 @@ void flush_iotlb_page(struct iommu *obj, u32 da) if ((start <= da) && (da < start + bytes)) { dev_dbg(obj->dev, "%s: %08x<=%08x(%x)\n", __func__, start, da, bytes); - + iotlb_load_cr(obj, &cr); iommu_write_reg(obj, 1, MMU_FLUSH_ENTRY); } } -- cgit v1.1 From cb5793db5ecf108594d8006ae838e47996a76a19 Mon Sep 17 00:00:00 2001 From: janboe <janboe.ye@gmail.com> Date: Tue, 23 Jun 2009 13:30:25 +0300 Subject: OMAP2/3: Initialize gpio debounce register Some bootloader may initialize debounce register and this will make dbclk not consist with the debounce register after linux kernel boot up. Signed-off-by: janboe <janboe.ye@gmail.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com> --- arch/arm/plat-omap/gpio.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 7fd89ba..26b387c 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -1585,6 +1585,7 @@ static int __init _omap_gpio_init(void) __raw_writel(0x00000000, bank->base + OMAP24XX_GPIO_IRQENABLE1); __raw_writel(0xffffffff, bank->base + OMAP24XX_GPIO_IRQSTATUS1); __raw_writew(0x0015, bank->base + OMAP24XX_GPIO_SYSCONFIG); + __raw_writel(0x00000000, bank->base + OMAP24XX_GPIO_DEBOUNCE_EN); /* Initialize interface clock ungated, module enabled */ __raw_writel(0, bank->base + OMAP24XX_GPIO_CTRL); -- cgit v1.1 From 291e99a112f9bf34c027031de7ef8b94a2692937 Mon Sep 17 00:00:00 2001 From: Ben Dooks <ben-linux@fluff.org> Date: Mon, 4 May 2009 09:30:51 +0100 Subject: [ARM] S3C24XX: Fix use of CONFIG_S3C24XX_PWM CONFIG_S3C24XX_PWM was defined in arch/arm/plat-s3c24xx/Kconfig but not used anywhere else as the corresponding makefile used CONFIG_HAVE_PWM (selected by CONFIG_S3C24XX_PWM) to compile the PWM driver. Change the makefile to use CONFIG_S3C24XX_PWM to compile this driver to ensure it is only build when needed. Signed-off-by: Ben Dooks <ben-linux@fluff.org> --- arch/arm/plat-s3c24xx/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile index 636cb127..579a165 100644 --- a/arch/arm/plat-s3c24xx/Makefile +++ b/arch/arm/plat-s3c24xx/Makefile @@ -29,7 +29,7 @@ obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_PM) += irq-pm.o obj-$(CONFIG_PM) += sleep.o -obj-$(CONFIG_HAVE_PWM) += pwm.o +obj-$(CONFIG_S3C24XX_PWM) += pwm.o obj-$(CONFIG_S3C2410_CLOCK) += s3c2410-clock.o obj-$(CONFIG_S3C2410_DMA) += dma.o obj-$(CONFIG_S3C24XX_ADC) += adc.o -- cgit v1.1 From a18327f35a879a6467c3e901da7f68944b191732 Mon Sep 17 00:00:00 2001 From: Ben Dooks <ben-linux@fluff.org> Date: Mon, 4 May 2009 09:53:12 +0100 Subject: [ARM] S3C: Remove unused CONFIG_DEBUG_S3C_PORT Remove the unused CONFIG_DEBUG_S3C_PORT as we currently only have support for using the S3C UARTs via the low-level debug code. Signed-off-by: Ben Dooks <ben-linux@fluff.org> --- arch/arm/Kconfig.debug | 8 -------- arch/arm/configs/s3c2410_defconfig | 1 - arch/arm/configs/s3c6400_defconfig | 1 - arch/arm/configs/tct_hammer_defconfig | 1 - 4 files changed, 11 deletions(-) (limited to 'arch') diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index a71fd94..a89e473 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -99,14 +99,6 @@ config DEBUG_CLPS711X_UART2 output to the second serial port on these devices. Saying N will cause the debug messages to appear on the first serial port. -config DEBUG_S3C_PORT - depends on DEBUG_LL && PLAT_S3C - bool "Kernel low-level debugging messages via S3C UART" - help - Say Y here if you want debug print routines to go to one of the - S3C internal UARTs. The chosen UART must have been configured - before it is used. - config DEBUG_S3C_UART depends on PLAT_S3C int "S3C UART to use for low-level debug" diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index 2d58b8f..f4f1899 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -2298,7 +2298,6 @@ CONFIG_DEBUG_ERRORS=y # CONFIG_DEBUG_STACK_USAGE is not set CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set -CONFIG_DEBUG_S3C_PORT=y CONFIG_DEBUG_S3C_UART=0 # diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig index 2e8fa50..3286060 100644 --- a/arch/arm/configs/s3c6400_defconfig +++ b/arch/arm/configs/s3c6400_defconfig @@ -816,7 +816,6 @@ CONFIG_DEBUG_ERRORS=y # CONFIG_DEBUG_STACK_USAGE is not set CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set -CONFIG_DEBUG_S3C_PORT=y CONFIG_DEBUG_S3C_UART=0 # diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig index 07dfb98..9d32fae 100644 --- a/arch/arm/configs/tct_hammer_defconfig +++ b/arch/arm/configs/tct_hammer_defconfig @@ -857,7 +857,6 @@ CONFIG_DEBUG_ERRORS=y # CONFIG_DEBUG_STACK_USAGE is not set CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set -# CONFIG_DEBUG_S3C_PORT is not set CONFIG_DEBUG_S3C_UART=0 # -- cgit v1.1 From bc33dc5ae7ed7a422ab1141d3bf81c6cee2a5050 Mon Sep 17 00:00:00 2001 From: Huang Weiyi <weiyi.huang@gmail.com> Date: Tue, 16 Jun 2009 16:56:09 +0800 Subject: mx31: remove duplicated #include Remove duplicated #include in arch/arm/mach-mx3/devices.c. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> --- arch/arm/mach-mx3/devices.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c index d927edd..9e87e08 100644 --- a/arch/arm/mach-mx3/devices.c +++ b/arch/arm/mach-mx3/devices.c @@ -22,7 +22,6 @@ #include <linux/platform_device.h> #include <linux/serial.h> #include <linux/gpio.h> -#include <linux/dma-mapping.h> #include <mach/hardware.h> #include <mach/irqs.h> #include <mach/common.h> -- cgit v1.1 From c3a9c7f53a0eb1ec687ecf131f9cfb41bbdc26b5 Mon Sep 17 00:00:00 2001 From: Alberto Panizzo <maramaopercheseimorto@gmail.com> Date: Wed, 17 Jun 2009 15:05:21 +0200 Subject: ARM MXC: Armadillo 500 add NOR flash device support (resend). This patch add support for NOR flash mapping through the physmap driver. The purpose is to maintain the original Atmark partition model. Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> --- arch/arm/mach-mx3/armadillo5x0.c | 47 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 47 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-mx3/armadillo5x0.c b/arch/arm/mach-mx3/armadillo5x0.c index 54118109..38d99e6 100644 --- a/arch/arm/mach-mx3/armadillo5x0.c +++ b/arch/arm/mach-mx3/armadillo5x0.c @@ -31,6 +31,7 @@ #include <linux/smsc911x.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/mtd/physmap.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -97,6 +98,48 @@ static int armadillo5x0_pins[] = { }; /* + * MTD NOR Flash + */ +static struct mtd_partition armadillo5x0_nor_flash_partitions[] = { + { + .name = "nor.bootloader", + .offset = 0x00000000, + .size = 4*32*1024, + }, { + .name = "nor.kernel", + .offset = MTDPART_OFS_APPEND, + .size = 16*128*1024, + }, { + .name = "nor.userland", + .offset = MTDPART_OFS_APPEND, + .size = 110*128*1024, + }, { + .name = "nor.config", + .offset = MTDPART_OFS_APPEND, + .size = 1*128*1024, + }, +}; + +static struct physmap_flash_data armadillo5x0_nor_flash_pdata = { + .width = 2, + .parts = armadillo5x0_nor_flash_partitions, + .nr_parts = ARRAY_SIZE(armadillo5x0_nor_flash_partitions), +}; + +static struct resource armadillo5x0_nor_flash_resource = { + .flags = IORESOURCE_MEM, + .start = CS0_BASE_ADDR, + .end = CS0_BASE_ADDR + SZ_64M - 1, +}; + +static struct platform_device armadillo5x0_nor_flash = { + .name = "physmap-flash", + .id = -1, + .num_resources = 1, + .resource = &armadillo5x0_nor_flash_resource, +}; + +/* * FB support */ static const struct fb_videomode fb_modedb[] = { @@ -272,6 +315,10 @@ static void __init armadillo5x0_init(void) /* Register FB */ mxc_register_device(&mx3_ipu, &mx3_ipu_data); mxc_register_device(&mx3_fb, &mx3fb_pdata); + + /* Register NOR Flash */ + mxc_register_device(&armadillo5x0_nor_flash, + &armadillo5x0_nor_flash_pdata); } static void __init armadillo5x0_timer_init(void) -- cgit v1.1 From 0c8bad6a26aefbcb7b3d8d1e5d97c53076ac99af Mon Sep 17 00:00:00 2001 From: Alberto Panizzo <maramaopercheseimorto@gmail.com> Date: Wed, 17 Jun 2009 15:06:30 +0200 Subject: Armadillo 500 add NAND flash device support (resend). Since recent mxc_nand driver fixes from linux-mtd this patch add support for ST NAND02GW3B2CN6 (2k pages flash) placed on the armadillo 500 motherboard. Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> --- arch/arm/mach-mx3/armadillo5x0.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-mx3/armadillo5x0.c b/arch/arm/mach-mx3/armadillo5x0.c index 38d99e6..ee331fd 100644 --- a/arch/arm/mach-mx3/armadillo5x0.c +++ b/arch/arm/mach-mx3/armadillo5x0.c @@ -32,6 +32,7 @@ #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/mtd/physmap.h> +#include <linux/io.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -47,8 +48,10 @@ #include <mach/mmc.h> #include <mach/ipu.h> #include <mach/mx3fb.h> +#include <mach/mxc_nand.h> #include "devices.h" +#include "crm_regs.h" static int armadillo5x0_pins[] = { /* UART1 */ @@ -94,7 +97,14 @@ static int armadillo5x0_pins[] = { MX31_PIN_FPSHIFT__FPSHIFT, MX31_PIN_DRDY0__DRDY0, IOMUX_MODE(MX31_PIN_LCS1, IOMUX_CONFIG_GPIO), /*ADV7125_PSAVE*/ +}; +/* + * NAND Flash + */ +static struct mxc_nand_platform_data armadillo5x0_nand_flash_pdata = { + .width = 1, + .hw_ecc = 1, }; /* @@ -319,6 +329,12 @@ static void __init armadillo5x0_init(void) /* Register NOR Flash */ mxc_register_device(&armadillo5x0_nor_flash, &armadillo5x0_nor_flash_pdata); + + /* Register NAND Flash */ + mxc_register_device(&mxc_nand_device, &armadillo5x0_nand_flash_pdata); + + /* set NAND page size to 2k if not configured via boot mode pins */ + __raw_writel(__raw_readl(MXC_CCM_RCSR) | (1 << 30), MXC_CCM_RCSR); } static void __init armadillo5x0_timer_init(void) -- cgit v1.1 From 32c1ad9ab2ae4171d8f3dd0c70a611f799ad6775 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski <lg@denx.de> Date: Thu, 18 Jun 2009 12:40:48 +0200 Subject: pcm037: add MT9T031 camera support Add support for the MT9T031 CMOS camera sensor from Aptina to the PCM037 board. Also add two I2C iomux pin definitions, needed for pcm037. Also remove now unneeded #ifdef CONFIG_I2C_IMX. Signed-off-by: Guennadi Liakhovetski <lg@denx.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> --- arch/arm/mach-mx3/pcm037.c | 118 ++++++++++++++++++++++++++--- arch/arm/plat-mxc/include/mach/iomux-mx3.h | 2 + 2 files changed, 108 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c index c6f61a1..d7b29b7 100644 --- a/arch/arm/mach-mx3/pcm037.c +++ b/arch/arm/mach-mx3/pcm037.c @@ -18,7 +18,7 @@ #include <linux/types.h> #include <linux/init.h> - +#include <linux/dma-mapping.h> #include <linux/platform_device.h> #include <linux/mtd/physmap.h> #include <linux/mtd/plat-ram.h> @@ -33,22 +33,23 @@ #include <linux/irq.h> #include <linux/fsl_devices.h> -#include <mach/hardware.h> +#include <media/soc_camera.h> + #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/mach/map.h> +#include <mach/board-pcm037.h> #include <mach/common.h> +#include <mach/hardware.h> +#include <mach/i2c.h> #include <mach/imx-uart.h> #include <mach/iomux-mx3.h> #include <mach/ipu.h> -#include <mach/board-pcm037.h> +#include <mach/mmc.h> +#include <mach/mx3_camera.h> #include <mach/mx3fb.h> #include <mach/mxc_nand.h> -#include <mach/mmc.h> -#ifdef CONFIG_I2C_IMX -#include <mach/i2c.h> -#endif #include "devices.h" @@ -56,6 +57,8 @@ static unsigned int pcm037_pins[] = { /* I2C */ MX31_PIN_CSPI2_MOSI__SCL, MX31_PIN_CSPI2_MISO__SDA, + MX31_PIN_CSPI2_SS2__I2C3_SDA, + MX31_PIN_CSPI2_SCLK__I2C3_SCL, /* SDHC1 */ MX31_PIN_SD1_DATA3__SD1_DATA3, MX31_PIN_SD1_DATA2__SD1_DATA2, @@ -120,6 +123,22 @@ static unsigned int pcm037_pins[] = { MX31_PIN_D3_SPL__D3_SPL, MX31_PIN_D3_CLS__D3_CLS, MX31_PIN_LCS0__GPI03_23, + /* CSI */ + IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_GPIO), + MX31_PIN_CSI_D6__CSI_D6, + MX31_PIN_CSI_D7__CSI_D7, + MX31_PIN_CSI_D8__CSI_D8, + MX31_PIN_CSI_D9__CSI_D9, + MX31_PIN_CSI_D10__CSI_D10, + MX31_PIN_CSI_D11__CSI_D11, + MX31_PIN_CSI_D12__CSI_D12, + MX31_PIN_CSI_D13__CSI_D13, + MX31_PIN_CSI_D14__CSI_D14, + MX31_PIN_CSI_D15__CSI_D15, + MX31_PIN_CSI_HSYNC__CSI_HSYNC, + MX31_PIN_CSI_MCLK__CSI_MCLK, + MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, + MX31_PIN_CSI_VSYNC__CSI_VSYNC, }; static struct physmap_flash_data pcm037_flash_data = { @@ -250,19 +269,43 @@ static struct mxc_nand_platform_data pcm037_nand_board_info = { .hw_ecc = 1, }; -#ifdef CONFIG_I2C_IMX static struct imxi2c_platform_data pcm037_i2c_1_data = { .bitrate = 100000, }; +static struct imxi2c_platform_data pcm037_i2c_2_data = { + .bitrate = 20000, +}; + static struct at24_platform_data board_eeprom = { .byte_len = 4096, .page_size = 32, .flags = AT24_FLAG_ADDR16, }; +static int pcm037_camera_power(struct device *dev, int on) +{ + /* disable or enable the camera in X7 or X8 PCM970 connector */ + gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), !on); + return 0; +} + +static struct i2c_board_info pcm037_i2c_2_devices[] = { + { + I2C_BOARD_INFO("mt9t031", 0x5d), + }, +}; + +static struct soc_camera_link iclink = { + .bus_id = 0, /* Must match with the camera ID */ + .power = pcm037_camera_power, + .board_info = &pcm037_i2c_2_devices[0], + .i2c_adapter_id = 2, + .module_name = "mt9t031", +}; + static struct i2c_board_info pcm037_i2c_devices[] = { - { + { I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */ .platform_data = &board_eeprom, }, { @@ -270,7 +313,14 @@ static struct i2c_board_info pcm037_i2c_devices[] = { .type = "pcf8563", } }; -#endif + +static struct platform_device pcm037_camera = { + .name = "soc-camera-pdrv", + .id = 0, + .dev = { + .platform_data = &iclink, + }, +}; /* Not connected by default */ #ifdef PCM970_SDHC_RW_SWITCH @@ -334,9 +384,41 @@ static struct imxmmc_platform_data sdhc_pdata = { .exit = pcm970_sdhc1_exit, }; +struct mx3_camera_pdata camera_pdata = { + .dma_dev = &mx3_ipu.dev, + .flags = MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10, + .mclk_10khz = 2000, +}; + +static int __init pcm037_camera_alloc_dma(const size_t buf_size) +{ + dma_addr_t dma_handle; + void *buf; + int dma; + + if (buf_size < 2 * 1024 * 1024) + return -EINVAL; + + buf = dma_alloc_coherent(NULL, buf_size, &dma_handle, GFP_KERNEL); + if (!buf) { + pr_err("%s: cannot allocate camera buffer-memory\n", __func__); + return -ENOMEM; + } + + memset(buf, 0, buf_size); + + dma = dma_declare_coherent_memory(&mx3_camera.dev, + dma_handle, dma_handle, buf_size, + DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE); + + /* The way we call dma_declare_coherent_memory only a malloc can fail */ + return dma & DMA_MEMORY_MAP ? 0 : -ENOMEM; +} + static struct platform_device *devices[] __initdata = { &pcm037_flash, &pcm037_sram_device, + &pcm037_camera, }; static struct ipu_platform_data mx3_ipu_data = { @@ -415,18 +497,30 @@ static void __init mxc_board_init(void) } -#ifdef CONFIG_I2C_IMX + /* I2C adapters and devices */ i2c_register_board_info(1, pcm037_i2c_devices, ARRAY_SIZE(pcm037_i2c_devices)); mxc_register_device(&mxc_i2c_device1, &pcm037_i2c_1_data); -#endif + mxc_register_device(&mxc_i2c_device2, &pcm037_i2c_2_data); + mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info); mxc_register_device(&mxcsdhc_device0, &sdhc_pdata); mxc_register_device(&mx3_ipu, &mx3_ipu_data); mxc_register_device(&mx3_fb, &mx3fb_pdata); if (!gpio_usbotg_hs_activate()) mxc_register_device(&mxc_otg_udc_device, &usb_pdata); + + /* CSI */ + /* Camera power: default - off */ + ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), "mt9t031-power"); + if (!ret) + gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), 1); + else + iclink.power = NULL; + + if (!pcm037_camera_alloc_dma(4 * 1024 * 1024)) + mxc_register_device(&mx3_camera, &camera_pdata); } static void __init pcm037_timer_init(void) diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h index 27f8d1b..2eb182f 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h @@ -602,6 +602,8 @@ enum iomux_pins { #define MX31_PIN_I2C_DAT__SDA IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC) #define MX31_PIN_DCD_DTE1__I2C2_SDA IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT2) #define MX31_PIN_RI_DTE1__I2C2_SCL IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT2) +#define MX31_PIN_CSPI2_SS2__I2C3_SDA IOMUX_MODE(MX31_PIN_CSPI2_SS2, IOMUX_CONFIG_ALT1) +#define MX31_PIN_CSPI2_SCLK__I2C3_SCL IOMUX_MODE(MX31_PIN_CSPI2_SCLK, IOMUX_CONFIG_ALT1) #define MX31_PIN_CSI_D4__CSI_D4 IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_FUNC) #define MX31_PIN_CSI_D5__CSI_D5 IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_FUNC) #define MX31_PIN_CSI_D6__CSI_D6 IOMUX_MODE(MX31_PIN_CSI_D6, IOMUX_CONFIG_FUNC) -- cgit v1.1 From 574ec547c7771881e18e4e76ca970e323bcdc774 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski <lg@denx.de> Date: Tue, 23 Jun 2009 13:26:23 +0200 Subject: ARM: add support for the EET board, based on the i.MX31 pcm037 module The "EET" variant of the pcm037 board has an OLED display, using a S6E63D6 display controller on the first SPI interface, using GPIO57 as a chip-select for it. S6E63D6 is initialised in the boot-loader, so we only have to take care of the LCD. EET also adds several buttons and LEDs on GPIOs. This patch adds a "pcm037_variant=" kernel command line parameter to specify at boot-time which board the kernel is running on, default is "pcm970", specify "eet" for the EET board. Signed-off-by: Guennadi Liakhovetski <lg@denx.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> --- arch/arm/mach-mx3/Kconfig | 8 ++ arch/arm/mach-mx3/Makefile | 1 + arch/arm/mach-mx3/pcm037.c | 65 +++++++++++-- arch/arm/mach-mx3/pcm037.h | 11 +++ arch/arm/mach-mx3/pcm037_eet.c | 204 +++++++++++++++++++++++++++++++++++++++++ 5 files changed, 283 insertions(+), 6 deletions(-) create mode 100644 arch/arm/mach-mx3/pcm037.h create mode 100644 arch/arm/mach-mx3/pcm037_eet.c (limited to 'arch') diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig index 17a21a2..851f245 100644 --- a/arch/arm/mach-mx3/Kconfig +++ b/arch/arm/mach-mx3/Kconfig @@ -36,6 +36,14 @@ config MACH_PCM037 Include support for Phytec pcm037 platform. This includes specific configurations for the board and its peripherals. +config MACH_PCM037_EET + bool "Support pcm037 EET board extensions" + depends on MACH_PCM037 + help + Add support for PCM037 EET baseboard extensions. If you are using the + OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel + command-line parameter. + config MACH_MX31LITE bool "Support MX31 LITEKIT (LogicPD)" select ARCH_MX31 diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile index 0322696..6b97754 100644 --- a/arch/arm/mach-mx3/Makefile +++ b/arch/arm/mach-mx3/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_MACH_MX31ADS) += mx31ads.o obj-$(CONFIG_MACH_MX31LILLY) += mx31lilly.o mx31lilly-db.o obj-$(CONFIG_MACH_MX31LITE) += mx31lite.o obj-$(CONFIG_MACH_PCM037) += pcm037.o +obj-$(CONFIG_MACH_PCM037_EET) += pcm037_eet.o obj-$(CONFIG_MACH_MX31_3DS) += mx31pdk.o obj-$(CONFIG_MACH_MX31MOBOARD) += mx31moboard.o mx31moboard-devboard.o \ mx31moboard-marxbot.o diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c index d7b29b7..840cfda3 100644 --- a/arch/arm/mach-mx3/pcm037.c +++ b/arch/arm/mach-mx3/pcm037.c @@ -52,6 +52,41 @@ #include <mach/mxc_nand.h> #include "devices.h" +#include "pcm037.h" + +static enum pcm037_board_variant pcm037_instance = PCM037_PCM970; + +static int __init pcm037_variant_setup(char *str) +{ + if (!strcmp("eet", str)) + pcm037_instance = PCM037_EET; + else if (strcmp("pcm970", str)) + pr_warning("Unknown pcm037 baseboard variant %s\n", str); + + return 1; +} + +/* Supported values: "pcm970" (default) and "eet" */ +__setup("pcm037_variant=", pcm037_variant_setup); + +enum pcm037_board_variant pcm037_variant(void) +{ + return pcm037_instance; +} + +/* UART1 with RTS/CTS handshake signals */ +static unsigned int pcm037_uart1_handshake_pins[] = { + MX31_PIN_CTS1__CTS1, + MX31_PIN_RTS1__RTS1, + MX31_PIN_TXD1__TXD1, + MX31_PIN_RXD1__RXD1, +}; + +/* UART1 without RTS/CTS handshake signals */ +static unsigned int pcm037_uart1_pins[] = { + MX31_PIN_TXD1__TXD1, + MX31_PIN_RXD1__RXD1, +}; static unsigned int pcm037_pins[] = { /* I2C */ @@ -76,11 +111,6 @@ static unsigned int pcm037_pins[] = { MX31_PIN_CSPI1_SS0__SS0, MX31_PIN_CSPI1_SS1__SS1, MX31_PIN_CSPI1_SS2__SS2, - /* UART1 */ - MX31_PIN_CTS1__CTS1, - MX31_PIN_RTS1__RTS1, - MX31_PIN_TXD1__TXD1, - MX31_PIN_RXD1__RXD1, /* UART2 */ MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2, @@ -459,6 +489,22 @@ static const struct fb_videomode fb_modedb[] = { .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH, .vmode = FB_VMODE_NONINTERLACED, .flag = 0, + }, { + /* 240x320 @ 60 Hz */ + .name = "CMEL-OLED", + .refresh = 60, + .xres = 240, + .yres = 320, + .pixclock = 185925, + .left_margin = 9, + .right_margin = 16, + .upper_margin = 7, + .lower_margin = 9, + .hsync_len = 1, + .vsync_len = 1, + .sync = FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, }, }; @@ -479,6 +525,14 @@ static void __init mxc_board_init(void) mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins), "pcm037"); + if (pcm037_variant() == PCM037_EET) + mxc_iomux_setup_multiple_pins(pcm037_uart1_pins, + ARRAY_SIZE(pcm037_uart1_pins), "pcm037_uart1"); + else + mxc_iomux_setup_multiple_pins(pcm037_uart1_handshake_pins, + ARRAY_SIZE(pcm037_uart1_handshake_pins), + "pcm037_uart1"); + platform_add_devices(devices, ARRAY_SIZE(devices)); mxc_register_device(&mxc_uart_device0, &uart_pdata); @@ -542,4 +596,3 @@ MACHINE_START(PCM037, "Phytec Phycore pcm037") .init_machine = mxc_board_init, .timer = &pcm037_timer, MACHINE_END - diff --git a/arch/arm/mach-mx3/pcm037.h b/arch/arm/mach-mx3/pcm037.h new file mode 100644 index 0000000..d692972 --- /dev/null +++ b/arch/arm/mach-mx3/pcm037.h @@ -0,0 +1,11 @@ +#ifndef __PCM037_H__ +#define __PCM037_H__ + +enum pcm037_board_variant { + PCM037_PCM970, + PCM037_EET, +}; + +extern enum pcm037_board_variant pcm037_variant(void); + +#endif diff --git a/arch/arm/mach-mx3/pcm037_eet.c b/arch/arm/mach-mx3/pcm037_eet.c new file mode 100644 index 0000000..fe52fb1 --- /dev/null +++ b/arch/arm/mach-mx3/pcm037_eet.c @@ -0,0 +1,204 @@ +/* + * Copyright (C) 2009 + * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/gpio.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> + +#include <mach/common.h> +#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE) +#include <mach/spi.h> +#endif +#include <mach/iomux-mx3.h> + +#include <asm/mach-types.h> + +#include "pcm037.h" +#include "devices.h" + +static unsigned int pcm037_eet_pins[] = { + /* SPI #1 */ + MX31_PIN_CSPI1_MISO__MISO, + MX31_PIN_CSPI1_MOSI__MOSI, + MX31_PIN_CSPI1_SCLK__SCLK, + MX31_PIN_CSPI1_SPI_RDY__SPI_RDY, + MX31_PIN_CSPI1_SS0__SS0, + MX31_PIN_CSPI1_SS1__SS1, + MX31_PIN_CSPI1_SS2__SS2, + + /* Reserve and hardwire GPIO 57 high - S6E63D6 chipselect */ + IOMUX_MODE(MX31_PIN_KEY_COL7, IOMUX_CONFIG_GPIO), + /* GPIO keys */ + IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO), /* 0 */ + IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO), /* 1 */ + IOMUX_MODE(MX31_PIN_GPIO1_2, IOMUX_CONFIG_GPIO), /* 2 */ + IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO), /* 3 */ + IOMUX_MODE(MX31_PIN_SVEN0, IOMUX_CONFIG_GPIO), /* 32 */ + IOMUX_MODE(MX31_PIN_STX0, IOMUX_CONFIG_GPIO), /* 33 */ + IOMUX_MODE(MX31_PIN_SRX0, IOMUX_CONFIG_GPIO), /* 34 */ + IOMUX_MODE(MX31_PIN_SIMPD0, IOMUX_CONFIG_GPIO), /* 35 */ + IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_GPIO), /* 38 */ + IOMUX_MODE(MX31_PIN_CTS1, IOMUX_CONFIG_GPIO), /* 39 */ + IOMUX_MODE(MX31_PIN_KEY_ROW4, IOMUX_CONFIG_GPIO), /* 50 */ + IOMUX_MODE(MX31_PIN_KEY_ROW5, IOMUX_CONFIG_GPIO), /* 51 */ + IOMUX_MODE(MX31_PIN_KEY_ROW6, IOMUX_CONFIG_GPIO), /* 52 */ + IOMUX_MODE(MX31_PIN_KEY_ROW7, IOMUX_CONFIG_GPIO), /* 53 */ + + /* LEDs */ + IOMUX_MODE(MX31_PIN_DTR_DTE1, IOMUX_CONFIG_GPIO), /* 44 */ + IOMUX_MODE(MX31_PIN_DSR_DTE1, IOMUX_CONFIG_GPIO), /* 45 */ + IOMUX_MODE(MX31_PIN_KEY_COL5, IOMUX_CONFIG_GPIO), /* 55 */ + IOMUX_MODE(MX31_PIN_KEY_COL6, IOMUX_CONFIG_GPIO), /* 56 */ +}; + +/* SPI */ +static struct spi_board_info pcm037_spi_dev[] = { + { + .modalias = "dac124s085", + .max_speed_hz = 400000, + .bus_num = 0, + .chip_select = 0, /* Index in pcm037_spi1_cs[] */ + .mode = SPI_CPHA, + }, +}; + +/* Platform Data for MXC CSPI */ +#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE) +static int pcm037_spi1_cs[] = {MXC_SPI_CS(1), IOMUX_TO_GPIO(MX31_PIN_KEY_COL7)}; + +struct spi_imx_master pcm037_spi1_master = { + .chipselect = pcm037_spi1_cs, + .num_chipselect = ARRAY_SIZE(pcm037_spi1_cs), +}; +#endif + +/* GPIO-keys input device */ +static struct gpio_keys_button pcm037_gpio_keys[] = { + { + .type = EV_KEY, + .code = KEY_L, + .gpio = 0, + .desc = "Wheel Manual", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = KEY_A, + .gpio = 1, + .desc = "Wheel AF", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = KEY_V, + .gpio = 2, + .desc = "Wheel View", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = KEY_M, + .gpio = 3, + .desc = "Wheel Menu", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = KEY_UP, + .gpio = 32, + .desc = "Nav Pad Up", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = KEY_RIGHT, + .gpio = 33, + .desc = "Nav Pad Right", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = KEY_DOWN, + .gpio = 34, + .desc = "Nav Pad Down", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = KEY_LEFT, + .gpio = 35, + .desc = "Nav Pad Left", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = KEY_ENTER, + .gpio = 38, + .desc = "Nav Pad Ok", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = KEY_O, + .gpio = 39, + .desc = "Wheel Off", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = BTN_FORWARD, + .gpio = 50, + .desc = "Focus Forward", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = BTN_BACK, + .gpio = 51, + .desc = "Focus Backward", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = BTN_MIDDLE, + .gpio = 52, + .desc = "Release Half", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = BTN_EXTRA, + .gpio = 53, + .desc = "Release Full", + .wakeup = 0, + }, +}; + +static struct gpio_keys_platform_data pcm037_gpio_keys_platform_data = { + .buttons = pcm037_gpio_keys, + .nbuttons = ARRAY_SIZE(pcm037_gpio_keys), + .rep = 0, /* No auto-repeat */ +}; + +static struct platform_device pcm037_gpio_keys_device = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &pcm037_gpio_keys_platform_data, + }, +}; + +static int eet_init_devices(void) +{ + if (!machine_is_pcm037() || pcm037_variant() != PCM037_EET) + return 0; + + mxc_iomux_setup_multiple_pins(pcm037_eet_pins, + ARRAY_SIZE(pcm037_eet_pins), "pcm037_eet"); + + /* SPI */ + spi_register_board_info(pcm037_spi_dev, ARRAY_SIZE(pcm037_spi_dev)); +#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE) + mxc_register_device(&mxc_spi_device0, &pcm037_spi1_master); +#endif + + platform_device_register(&pcm037_gpio_keys_device); + + return 0; +} + +late_initcall(eet_init_devices); -- cgit v1.1 From f49156ea1bf3bccf45a01351cf3db2b5f6a8597e Mon Sep 17 00:00:00 2001 From: Timur Tabi <timur@freescale.com> Date: Tue, 26 May 2009 10:21:42 -0500 Subject: powerpc/qe: add polling timeout to qe_issue_cmd() The qe_issue_cmd() function (Freescale PowerPC QUICC Engine library) polls on a register until a status bit changes, but does not include a timeout to handle the situation if the bit never changes. Change the code to use the new spin_event_timeout() macro, which simplifies polling on a register without a timeout. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> --- arch/powerpc/sysdev/qe_lib/qe.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c index b28b0e5..237e365 100644 --- a/arch/powerpc/sysdev/qe_lib/qe.c +++ b/arch/powerpc/sysdev/qe_lib/qe.c @@ -112,6 +112,7 @@ int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input) { unsigned long flags; u8 mcn_shift = 0, dev_shift = 0; + u32 ret; spin_lock_irqsave(&qe_lock, flags); if (cmd == QE_RESET) { @@ -139,11 +140,13 @@ int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input) } /* wait for the QE_CR_FLG to clear */ - while(in_be32(&qe_immr->cp.cecr) & QE_CR_FLG) - cpu_relax(); + ret = spin_event_timeout((in_be32(&qe_immr->cp.cecr) & QE_CR_FLG) == 0, + 100, 0); + /* On timeout (e.g. failure), the expression will be false (ret == 0), + otherwise it will be true (ret == 1). */ spin_unlock_irqrestore(&qe_lock, flags); - return 0; + return ret == 1; } EXPORT_SYMBOL(qe_issue_cmd); -- cgit v1.1 From 5e10cf587a7b1aa34099cbfc244e6f04e96dc835 Mon Sep 17 00:00:00 2001 From: Kumar Gala <galak@kernel.crashing.org> Date: Tue, 19 May 2009 00:52:20 -0500 Subject: powerpc/cpm1: Remove IMAP_ADDR We no longer user IMAP_ADDR for anything so kill it off. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> --- arch/powerpc/include/asm/cpm1.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/cpm1.h b/arch/powerpc/include/asm/cpm1.h index 2ff79874..7685ffd 100644 --- a/arch/powerpc/include/asm/cpm1.h +++ b/arch/powerpc/include/asm/cpm1.h @@ -598,8 +598,6 @@ typedef struct risc_timer_pram { #define CICR_IEN ((uint)0x00000080) /* Int. enable */ #define CICR_SPS ((uint)0x00000001) /* SCC Spread */ -#define IMAP_ADDR (get_immrbase()) - #define CPM_PIN_INPUT 0 #define CPM_PIN_OUTPUT 1 #define CPM_PIN_PRIMARY 0 -- cgit v1.1 From a44a23ed4d144e4fb83d256b32021b732bda4787 Mon Sep 17 00:00:00 2001 From: Kumar Gala <galak@kernel.crashing.org> Date: Thu, 18 Jun 2009 23:28:34 -0500 Subject: powerpc/85xx: Stop using ppc_md.init on socrates Match what other 85xx platforms do for of_platform_bus_probe and use machine_device_initcall. This is one small step in killing of ppc_md.init. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> --- arch/powerpc/platforms/85xx/socrates.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/85xx/socrates.c b/arch/powerpc/platforms/85xx/socrates.c index d0e8443..747d8fb 100644 --- a/arch/powerpc/platforms/85xx/socrates.c +++ b/arch/powerpc/platforms/85xx/socrates.c @@ -102,10 +102,11 @@ static struct of_device_id __initdata socrates_of_bus_ids[] = { {}, }; -static void __init socrates_init(void) +static int __init socrates_publish_devices(void) { - of_platform_bus_probe(NULL, socrates_of_bus_ids, NULL); + return of_platform_bus_probe(NULL, socrates_of_bus_ids, NULL); } +machine_device_initcall(socrates, socrates_publish_devices); /* * Called very early, device-tree isn't unflattened @@ -124,7 +125,6 @@ define_machine(socrates) { .name = "Socrates", .probe = socrates_probe, .setup_arch = socrates_setup_arch, - .init = socrates_init, .init_IRQ = socrates_pic_init, .get_irq = mpic_get_irq, .restart = fsl_rstcr_restart, -- cgit v1.1 From fa874618c3155e4f255387987d630a203578b5ae Mon Sep 17 00:00:00 2001 From: Randy Vinson <rvinson@mvista.com> Date: Fri, 19 Jun 2009 03:22:08 +0400 Subject: powerpc/85xx: Fix FSL RapidIO probing on MDS boards FSL RapidIO won't probe without a proper compatible entry. This patch fixes the issue by adding fsl,rapidio-delta compatible to mpc85xx_ids. Signed-off-by: Randy Vinson <rvinson@mvista.com> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> --- arch/powerpc/platforms/85xx/mpc85xx_mds.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c index 77f90b3..60ed9c0 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c @@ -285,6 +285,7 @@ static struct of_device_id mpc85xx_ids[] = { { .type = "qe", }, { .compatible = "fsl,qe", }, { .compatible = "gianfar", }, + { .compatible = "fsl,rapidio-delta", }, {}, }; -- cgit v1.1 From cb1ffb6204712b04396ae0a9f3d1bf93cd8df8fb Mon Sep 17 00:00:00 2001 From: Kumar Gala <galak@kernel.crashing.org> Date: Fri, 19 Jun 2009 03:30:42 -0500 Subject: powerpc/85xx: Fix issue found by lockdep trace in smp_85xx_kick_cpu lockdep trace found the following: ------------[ cut here ]------------ Badness at c007baf0 [verbose debug info unavailable] NIP: c007baf0 LR: c007bad8 CTR: 00000000 REGS: ef855e00 TRAP: 0700 Tainted: G W (2.6.30-06736-g12a31df-dirty) MSR: 00021000 <ME,CE> CR: 24044022 XER: 20000000 TASK = ef858000[1] 'swapper' THREAD: ef854000 CPU: 0 GPR00: 00000000 ef855eb0 ef858000 00000001 000000d0 f1000000 ffbc8000 ffffffff GPR08: 000000d0 c0760000 c0710000 00000007 2fffffff 1004a388 7ffd9400 00000000 GPR16: 00000000 7ffcd100 7ffcd100 7ffcd100 c059cd78 c075c498 c057da7c ffffffff GPR24: ffbc8000 f1000000 00000001 c00bf8b0 c07595d4 000000d0 00021000 000000d0 NIP [c007baf0] lockdep_trace_alloc+0xc0/0xf0 LR [c007bad8] lockdep_trace_alloc+0xa8/0xf0 Call Trace: [ef855eb0] [c007ba60] lockdep_trace_alloc+0x30/0xf0 (unreliable) [ef855ec0] [c00cb3ac] kmem_cache_alloc+0x2c/0xf0 [ef855ee0] [c00bf8b0] __get_vm_area_node+0x80/0x1c0 [ef855f10] [c0017580] __ioremap_caller+0x1d0/0x1e0 [ef855f40] [c057da7c] smp_85xx_kick_cpu+0x64/0x124 [ef855f60] [c0599180] __cpu_up+0xd0/0x1a4 [ef855f80] [c05997c4] cpu_up+0x14c/0x1e0 [ef855fc0] [c05732a0] kernel_init+0x100/0x1c4 [ef855ff0] [c0011524] kernel_thread+0x4c/0x68 Instruction dump: 8009c174 2f800000 409e0048 73c08000 40820040 4818980d 2f830000 419effa0 3d20c076 8009c388 2f800000 409eff90 <0fe00000> 4bffff88 60000000 60000000 We were calling ioremap after we local_irq_restore(flags). A simple reorder fixes the problem. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> --- arch/powerpc/platforms/85xx/smp.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c index cc0b0db..62c592ede6 100644 --- a/arch/powerpc/platforms/85xx/smp.c +++ b/arch/powerpc/platforms/85xx/smp.c @@ -52,20 +52,19 @@ smp_85xx_kick_cpu(int nr) pr_debug("smp_85xx_kick_cpu: kick CPU #%d\n", nr); - local_irq_save(flags); - np = of_get_cpu_node(nr, NULL); cpu_rel_addr = of_get_property(np, "cpu-release-addr", NULL); if (cpu_rel_addr == NULL) { printk(KERN_ERR "No cpu-release-addr for cpu %d\n", nr); - local_irq_restore(flags); return; } /* Map the spin table */ bptr_vaddr = ioremap(*cpu_rel_addr, SIZE_BOOT_ENTRY); + local_irq_save(flags); + out_be32(bptr_vaddr + BOOT_ENTRY_PIR, nr); out_be32(bptr_vaddr + BOOT_ENTRY_ADDR_LOWER, __pa(__early_start)); @@ -73,10 +72,10 @@ smp_85xx_kick_cpu(int nr) while ((__secondary_hold_acknowledge != nr) && (++n < 1000)) mdelay(1); - iounmap(bptr_vaddr); - local_irq_restore(flags); + iounmap(bptr_vaddr); + pr_debug("waited %d msecs for CPU #%d.\n", n, nr); } -- cgit v1.1 From 6cc7959f385abc77abdeda5462f96407a556265a Mon Sep 17 00:00:00 2001 From: Huang Weiyi <weiyi.huang@gmail.com> Date: Sat, 20 Jun 2009 19:16:59 +0800 Subject: powerpc/85xx: remove duplicated #include Remove duplicated #include in arch/powerpc/platforms/85xx/xes_mpc85xx.c. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> --- arch/powerpc/platforms/85xx/xes_mpc85xx.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/85xx/xes_mpc85xx.c b/arch/powerpc/platforms/85xx/xes_mpc85xx.c index ee01532..1b42605 100644 --- a/arch/powerpc/platforms/85xx/xes_mpc85xx.c +++ b/arch/powerpc/platforms/85xx/xes_mpc85xx.c @@ -32,7 +32,6 @@ #include <sysdev/fsl_soc.h> #include <sysdev/fsl_pci.h> -#include <linux/of_platform.h> /* A few bit definitions needed for fixups on some boards */ #define MPC85xx_L2CTL_L2E 0x80000000 /* L2 enable */ -- cgit v1.1 From 66c6b856d8738278a4a6e558d25c90e9950aa112 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov <avorontsov@ru.mvista.com> Date: Fri, 19 Jun 2009 03:37:52 +0400 Subject: powerpc/85xx: Make eSDHC 1-bit only transfer mode default for MPC8569E-MDS For yet unknown reason 4-bit mode doesn't work on MPC8569E-MDS boards, so make 1-bit mode default. When we resolve the issue, u-boot will remove sdhci,1-bit-only property from the device tree, while SDHCI will still work with older u-boots. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> --- arch/powerpc/boot/dts/mpc8569mds.dts | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/powerpc/boot/dts/mpc8569mds.dts b/arch/powerpc/boot/dts/mpc8569mds.dts index a8dcb01..a680165 100644 --- a/arch/powerpc/boot/dts/mpc8569mds.dts +++ b/arch/powerpc/boot/dts/mpc8569mds.dts @@ -253,6 +253,7 @@ /* Filled in by U-Boot */ clock-frequency = <0>; status = "disabled"; + sdhci,1-bit-only; }; crypto@30000 { -- cgit v1.1 From 503dcbeba50fd3545283594bc391b4a400fa6c48 Mon Sep 17 00:00:00 2001 From: Tony Lindgren <tony@atomide.com> Date: Tue, 23 Jun 2009 16:55:30 +0300 Subject: OMAP: Fix IOMEM macro for assembly Otherwise IOMEM calculations can fail. Signed-off-by: Tony Lindgren <tony@atomide.com> --- arch/arm/plat-omap/include/mach/io.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h index 3b28147..73f483d 100644 --- a/arch/arm/plat-omap/include/mach/io.h +++ b/arch/arm/plat-omap/include/mach/io.h @@ -201,7 +201,7 @@ #define OMAP2_IO_ADDRESS(pa) IOMEM(__OMAP2_IO_ADDRESS(pa)) #ifdef __ASSEMBLER__ -#define IOMEM(x) x +#define IOMEM(x) (x) #else #define IOMEM(x) ((void __force __iomem *)(x)) -- cgit v1.1 From 927dbcd668ede8d2210cc59bea548ca9ff45b240 Mon Sep 17 00:00:00 2001 From: Ben Dooks <ben@simtec.co.uk> Date: Tue, 23 Jun 2009 16:15:38 +0100 Subject: [ARM] S3C24XX: Fix spi-bus configuration build errors The commit ec976d6eb021dc8f2994248c310a41540f4756bd removed a number of gpio definitions from <mach/hardware.h> but misssed updating these two files: Fix the following build errors by including <linux/gpio.h>: arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c: In function 's3c24xx_spi_gpiocfg_bus1_gpg5_6_7': arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c:25: error: implicit declaration of function 's3c2410_gpio_cfgpin' arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c:28: error: implicit declaration of function 's3c2410_gpio_pullup' arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c: In function 's3c24xx_spi_gpiocfg_bus0_gpe11_12_13': arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c:25: error: implicit declaration of function 's3c2410_gpio_cfgpin' arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c:28: error: implicit declaration of function 's3c2410_gpio_pullup' Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org> --- arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c | 3 +-- arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c | 3 +-- 2 files changed, 2 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c index 9edf789..da7a617 100644 --- a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c +++ b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c @@ -12,8 +12,7 @@ */ #include <linux/kernel.h> - -#include <mach/hardware.h> +#include <linux/gpio.h> #include <mach/spi.h> #include <mach/regs-gpio.h> diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c index f34d0fc..86b9edc 100644 --- a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c +++ b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c @@ -12,8 +12,7 @@ */ #include <linux/kernel.h> - -#include <mach/hardware.h> +#include <linux/gpio.h> #include <mach/spi.h> #include <mach/regs-gpio.h> -- cgit v1.1 From ffd14417bdf2a1650bcb16d37c7e658535d1681a Mon Sep 17 00:00:00 2001 From: Huang Weiyi <weiyi.huang@gmail.com> Date: Tue, 23 Jun 2009 20:58:57 +0800 Subject: [ARM] MINI2440: remove duplicated #include Remove duplicated #include('s) in arch/arm/mach-s3c2440/mach-mini2440.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> --- arch/arm/mach-s3c2440/mach-mini2440.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c index 6a5bc30..e714bfa 100644 --- a/arch/arm/mach-s3c2440/mach-mini2440.c +++ b/arch/arm/mach-s3c2440/mach-mini2440.c @@ -48,8 +48,6 @@ #include <plat/mci.h> #include <plat/udc.h> -#include <plat/regs-serial.h> - #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/nand_ecc.h> -- cgit v1.1 From a3c79901170aba0d3717c2602326bab639eb1344 Mon Sep 17 00:00:00 2001 From: Ben Dooks <ben-linux@fluff.org> Date: Tue, 23 Jun 2009 16:30:02 +0100 Subject: [ARM] S3C24XX: Fix missing s3c_iis_device. Commit 52da219e9664e537a745877b0efa7cf2b1ff2996 removed the s3c_device_iis, but didn't replace it with anything so a number of s3c24xx machines are currently failing to build. As a temporary fix, re-instate s3c_device_iis until a proper replacement can be done for it. Signed-off-by: Ben Dooks <ben-linux@fluff.org> --- arch/arm/plat-s3c/include/plat/devs.h | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h index b5b9c4d..2e17082 100644 --- a/arch/arm/plat-s3c/include/plat/devs.h +++ b/arch/arm/plat-s3c/include/plat/devs.h @@ -37,6 +37,7 @@ extern struct platform_device s3c_device_i2c1; extern struct platform_device s3c_device_rtc; extern struct platform_device s3c_device_adc; extern struct platform_device s3c_device_sdi; +extern struct platform_device s3c_device_iis; extern struct platform_device s3c_device_hwmon; extern struct platform_device s3c_device_hsmmc0; extern struct platform_device s3c_device_hsmmc1; -- cgit v1.1 From b647712f669f4fadf428a14ab45ab4c03558cdf5 Mon Sep 17 00:00:00 2001 From: Ben Dooks <ben-linux@fluff.org> Date: Tue, 23 Jun 2009 16:34:35 +0100 Subject: [ARM] S3C: Fix S3C24XX build to not include s3c64xx IIS devices Commit 52da219e9664e537a745877b0efa7cf2b1ff2996 added IIS platform devices, but these do not build on s3c24xx systems and the file depends on SND_S3C24XX_SOC, which is selected for all S3C64XX/S3C24XX systems. As a quick fix, make the dev-audio.o file depends on SND_S3C64XX_SOC_I2S instead. Signed-off-by: Ben Dooks <ben-linux@fluff.org> --- arch/arm/plat-s3c/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile index 74bb7cb..0761766 100644 --- a/arch/arm/plat-s3c/Makefile +++ b/arch/arm/plat-s3c/Makefile @@ -34,7 +34,7 @@ obj-$(CONFIG_S3C_DEV_HSMMC) += dev-hsmmc.o obj-$(CONFIG_S3C_DEV_HSMMC1) += dev-hsmmc1.o obj-y += dev-i2c0.o obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o -obj-$(CONFIG_SND_S3C24XX_SOC) += dev-audio.o +obj-$(CONFIG_SND_S3C64XX_SOC_I2S) += dev-audio.o obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o obj-$(CONFIG_S3C_DEV_USB_HOST) += dev-usb.o obj-$(CONFIG_S3C_DEV_USB_HSOTG) += dev-usb-hsotg.o -- cgit v1.1 From bb38c222e07cbe252cfbd99cd6a9c834b0a2639a Mon Sep 17 00:00:00 2001 From: Paul Mundt <lethal@linux-sh.org> Date: Wed, 24 Jun 2009 01:41:05 +0900 Subject: sh: Fix up HAVE_PERF_COUNTERS typo. That's HAVE_PERF_COUNTERS not HAVE_PERF_COUNTER. This was right initially but I seem to have screwed it up while re-typing it out by hand on another machine when I checked it in. Hmph. Reported-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index eff0f23..e2bdd7b 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -15,7 +15,7 @@ config SUPERH select HAVE_IOREMAP_PROT if MMU select HAVE_ARCH_TRACEHOOK select HAVE_DMA_API_DEBUG - select HAVE_PERF_COUNTER + select HAVE_PERF_COUNTERS select RTC_LIB select GENERIC_ATOMIC64 help -- cgit v1.1 From 622a8f5f7bf160507861cf05309020049f42976d Mon Sep 17 00:00:00 2001 From: Ben Dooks <ben-linux@fluff.org> Date: Tue, 23 Jun 2009 18:20:10 +0100 Subject: [ARM] s3c2410_defconfig: add MINI2440 machine to build Add the MINI2440 to the list of machines built by the central defconfig. Signed-off-by: Ben Dooks <ben-linux@fluff.org> --- arch/arm/configs/s3c2410_defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index f4f1899..b498104 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -260,6 +260,7 @@ CONFIG_MACH_NEXCODER_2440=y CONFIG_SMDK2440_CPU2440=y CONFIG_MACH_AT2440EVB=y CONFIG_CPU_S3C2442=y +CONFIG_MACH_MINI2440=y # # S3C2442 Machines -- cgit v1.1 From 51af243c631d9d03376d1454a24cf0a96e6f17cb Mon Sep 17 00:00:00 2001 From: Ben Dooks <ben-linux@fluff.org> Date: Tue, 23 Jun 2009 18:23:27 +0100 Subject: [ARM] MINI2440: Add missing flash_bbt flat to NAND The commit 9db41f9edcb87ae050fcb171c44be7f212728d54 added the .flash_bbt flag to the nand set, so add this back into the mach-mini2440.c file (taken out on initial commit to allow build). Signed-off-by: Ben Dooks <ben-linux@fluff.org> --- arch/arm/mach-s3c2440/mach-mini2440.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c index e714bfa..ec71a69 100644 --- a/arch/arm/mach-s3c2440/mach-mini2440.c +++ b/arch/arm/mach-s3c2440/mach-mini2440.c @@ -273,6 +273,7 @@ static struct s3c2410_nand_set mini2440_nand_sets[] __initdata = { .nr_chips = 1, .nr_partitions = ARRAY_SIZE(mini2440_default_nand_part), .partitions = mini2440_default_nand_part, + .flash_bbt = 1, /* we use u-boot to create a BBT */ }, }; -- cgit v1.1 From 840c516f9c395c64240ad35f858f37ea16270afa Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" <rpjday@crashcourse.ca> Date: Tue, 23 Jun 2009 12:37:06 -0700 Subject: h8/300: fix incorrect "select" directives in arch/h8300/Kconfig.cpu. Fix the incorrect "select" directives by dropping the "CONFIG_" prefixes, and correcting the typo "H8S2768" to "H8S2678". Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Acked-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> --- arch/h8300/Kconfig.cpu | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/h8300/Kconfig.cpu b/arch/h8300/Kconfig.cpu index b65dcfe..6e2ecff 100644 --- a/arch/h8300/Kconfig.cpu +++ b/arch/h8300/Kconfig.cpu @@ -13,7 +13,7 @@ config H8300H_GENERIC config H8300H_AKI3068NET bool "AE-3068/69" - select CONFIG_H83068 + select H83068 help AKI-H8/3068F / AKI-H8/3069F Flashmicom LAN Board Support More Information. (Japanese Only) @@ -24,7 +24,7 @@ config H8300H_AKI3068NET config H8300H_H8MAX bool "H8MAX" - select CONFIG_H83068 + select H83068 help H8MAX Evaluation Board Support More Information. (Japanese Only) @@ -32,7 +32,7 @@ config H8300H_H8MAX config H8300H_SIM bool "H8/300H Simulator" - select CONFIG_H83007 + select H83007 help GDB Simulator Support More Information. @@ -45,7 +45,7 @@ config H8S_GENERIC config H8S_EDOSK2674 bool "EDOSK-2674" - select CONFIG_H8S2768 + select H8S2678 help Renesas EDOSK-2674 Evaluation Board Support More Information. -- cgit v1.1 From 7262b6e4a4cc18d0f67df145d032c843e4bc382b Mon Sep 17 00:00:00 2001 From: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Date: Tue, 23 Jun 2009 12:40:54 +0900 Subject: x86, mce: Fix mce resume on 32bit Calling mcheck_init() on resume is required only with CONFIG_X86_OLD_MCE=y. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Acked-by: Andi Kleen <andi@firstfloor.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com> --- arch/x86/power/cpu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/power/cpu.c b/arch/x86/power/cpu.c index d277ef1..b3d20b9 100644 --- a/arch/x86/power/cpu.c +++ b/arch/x86/power/cpu.c @@ -244,7 +244,7 @@ static void __restore_processor_state(struct saved_context *ctxt) do_fpu_end(); mtrr_ap_init(); -#ifdef CONFIG_X86_32 +#ifdef CONFIG_X86_OLD_MCE mcheck_init(&boot_cpu_data); #endif } -- cgit v1.1 From f007e99c8e2e322b8331aba72414715119a2920d Mon Sep 17 00:00:00 2001 From: Weidong Han <weidong.han@intel.com> Date: Sat, 23 May 2009 00:41:15 +0800 Subject: Intel-IOMMU, intr-remap: source-id checking To support domain-isolation usages, the platform hardware must be capable of uniquely identifying the requestor (source-id) for each interrupt message. Without source-id checking for interrupt remapping , a rouge guest/VM with assigned devices can launch interrupt attacks to bring down anothe guest/VM or the VMM itself. This patch adds source-id checking for interrupt remapping, and then really isolates interrupts for guests/VMs with assigned devices. Because PCI subsystem is not initialized yet when set up IOAPIC entries, use read_pci_config_byte to access PCI config space directly. Signed-off-by: Weidong Han <weidong.han@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> --- arch/x86/kernel/apic/io_apic.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index b7a7920..4d0216f 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -1414,6 +1414,9 @@ int setup_ioapic_entry(int apic_id, int irq, irte.vector = vector; irte.dest_id = IRTE_DEST(destination); + /* Set source-id of interrupt request */ + set_ioapic_sid(&irte, apic_id); + modify_irte(irq, &irte); ir_entry->index2 = (index >> 15) & 0x1; @@ -3290,6 +3293,9 @@ static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_ms irte.vector = cfg->vector; irte.dest_id = IRTE_DEST(dest); + /* Set source-id of interrupt request */ + set_msi_sid(&irte, pdev); + modify_irte(irq, &irte); msg->address_hi = MSI_ADDR_BASE_HI; -- cgit v1.1 From 76609a6928bff29ca05a94420ae3e088fbb9c2f9 Mon Sep 17 00:00:00 2001 From: Nelson Castillo <arhuaco@freaks-unidos.net> Date: Tue, 23 Jun 2009 13:54:32 -0500 Subject: [ARM] GTA02: build fixes (s3c2410_nand_set usage) This patch fixes two errors we get when building GTA02 kernel. ~ use_bbt is incorrect, we need flash_bbt. ~ We do not need .force_soft_ecc because we can unset CONFIG_MTD_NAND_S3C2410_HWECC. Signed-off-by: Nelson Castillo <arhuaco@freaks-unidos.net> [ben-linux@fluff.org: updated patch description] Signed-off-by: Ben Dooks <ben-linux@fluff.org> --- arch/arm/mach-s3c2442/mach-gta02.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-s3c2442/mach-gta02.c b/arch/arm/mach-s3c2442/mach-gta02.c index e23b581..0fb385b 100644 --- a/arch/arm/mach-s3c2442/mach-gta02.c +++ b/arch/arm/mach-s3c2442/mach-gta02.c @@ -433,8 +433,7 @@ static struct s3c2410_nand_set gta02_nand_sets[] = { */ .name = "neo1973-nand", .nr_chips = 1, - .use_bbt = 1, - .force_soft_ecc = 1, + .flash_bbt = 1, }, }; -- cgit v1.1 From c14dab5c0782ef632742963a66276a195418a63c Mon Sep 17 00:00:00 2001 From: Yong Wang <yong.y.wang@linux.intel.com> Date: Wed, 24 Jun 2009 10:13:24 +0800 Subject: perf_counter, x86: Set global control MSR correctly Previous code made an assumption that the power on value of global control MSR has enabled all fixed and general purpose counters properly. However, this is not the case for certain Intel processors, such as Atom - and it might also be firmware dependent. Each enable bit in IA32_PERF_GLOBAL_CTRL is AND'ed with the enable bits for all privilege levels in the respective IA32_PERFEVTSELx or IA32_PERF_FIXED_CTR_CTRL MSRs to start/stop the counting of respective counters. Counting is enabled if the AND'ed results is true; counting is disabled when the result is false. The end result is that all fixed counters are always disabled on Atom processors because the assumption is just invalid. Fix this by not initializing the ctrl-mask out of the global MSR, but setting it to perf_counter_mask. Reported-by: Stephane Eranian <eranian@googlemail.com> Signed-off-by: Yong Wang <yong.y.wang@intel.com> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <20090624021324.GA2788@ywang-moblin2.bj.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/kernel/cpu/perf_counter.c | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c index 22eb3a1..a310d19 100644 --- a/arch/x86/kernel/cpu/perf_counter.c +++ b/arch/x86/kernel/cpu/perf_counter.c @@ -969,13 +969,6 @@ fixed_mode_idx(struct perf_counter *counter, struct hw_perf_counter *hwc) if (!x86_pmu.num_counters_fixed) return -1; - /* - * Quirk, IA32_FIXED_CTRs do not work on current Atom processors: - */ - if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL && - boot_cpu_data.x86_model == 28) - return -1; - event = hwc->config & ARCH_PERFMON_EVENT_MASK; if (unlikely(event == x86_pmu.event_map(PERF_COUNT_HW_INSTRUCTIONS))) @@ -1428,8 +1421,6 @@ static int intel_pmu_init(void) */ x86_pmu.num_counters_fixed = max((int)edx.split.num_counters_fixed, 3); - rdmsrl(MSR_CORE_PERF_GLOBAL_CTRL, x86_pmu.intel_ctrl); - /* * Install the hw-cache-events table: */ @@ -1514,6 +1505,7 @@ void __init init_hw_perf_counters(void) perf_counter_mask |= ((1LL << x86_pmu.num_counters_fixed)-1) << X86_PMC_IDX_FIXED; + x86_pmu.intel_ctrl = perf_counter_mask; perf_counters_lapic_init(); register_die_notifier(&perf_counter_nmi_notifier); -- cgit v1.1 From d94d4adb7dd05b4e25f3c317a1b932ec74272a12 Mon Sep 17 00:00:00 2001 From: Paul Mundt <lethal@linux-sh.org> Date: Wed, 24 Jun 2009 22:35:30 +0900 Subject: sh: make set_perf_counter_pending() static inline. Fixes up a recently introduced build error. Reported-by: Kyle McMartin <kyle@mcmartin.ca> Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/include/asm/perf_counter.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sh/include/asm/perf_counter.h b/arch/sh/include/asm/perf_counter.h index a8153c2..61c2b40 100644 --- a/arch/sh/include/asm/perf_counter.h +++ b/arch/sh/include/asm/perf_counter.h @@ -2,6 +2,6 @@ #define __ASM_SH_PERF_COUNTER_H /* SH only supports software counters through this interface. */ -#define set_perf_counter_pending() do { } while (0) +static inline void set_perf_counter_pending(void) {} #endif /* __ASM_SH_PERF_COUNTER_H */ -- cgit v1.1 From 9c26f52b900f7207135bafc8789e1a4f5d43e096 Mon Sep 17 00:00:00 2001 From: Cliff Wickman <cpw@sgi.com> Date: Wed, 24 Jun 2009 09:41:59 -0500 Subject: x86: Fix uv bau sending buffer initialization The initialization of the UV Broadcast Assist Unit's sending buffers was making an invalid assumption about the initialization of an MMR that defines its address. The BIOS will not be providing that MMR. So uv_activation_descriptor_init() should unconditionally set it. Tested on UV simulator. Signed-off-by: Cliff Wickman <cpw@sgi.com> Cc: <stable@kernel.org> # for v2.6.30.x LKML-Reference: <E1MJTfj-0005i1-W8@eag09.americas.sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/kernel/tlb_uv.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c index 124d40c..8ccabb8 100644 --- a/arch/x86/kernel/tlb_uv.c +++ b/arch/x86/kernel/tlb_uv.c @@ -711,7 +711,6 @@ uv_activation_descriptor_init(int node, int pnode) unsigned long pa; unsigned long m; unsigned long n; - unsigned long mmr_image; struct bau_desc *adp; struct bau_desc *ad2; @@ -727,12 +726,8 @@ uv_activation_descriptor_init(int node, int pnode) n = pa >> uv_nshift; m = pa & uv_mmask; - mmr_image = uv_read_global_mmr64(pnode, UVH_LB_BAU_SB_DESCRIPTOR_BASE); - if (mmr_image) { - uv_write_global_mmr64(pnode, (unsigned long) - UVH_LB_BAU_SB_DESCRIPTOR_BASE, - (n << UV_DESC_BASE_PNODE_SHIFT | m)); - } + uv_write_global_mmr64(pnode, UVH_LB_BAU_SB_DESCRIPTOR_BASE, + (n << UV_DESC_BASE_PNODE_SHIFT | m)); /* * initializing all 8 (UV_ITEMS_PER_DESCRIPTOR) descriptors for each -- cgit v1.1 From 7433ab770327b471399f7b5baacad78e160b5393 Mon Sep 17 00:00:00 2001 From: Paul Mundt <lethal@linux-sh.org> Date: Thu, 25 Jun 2009 02:30:10 +0900 Subject: sh: Hook up page fault events for software perf counters. This adds page fault instrumentation for the software performance counters. Follows the x86 and powerpc changes. Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/mm/fault_32.c | 61 +++++++++++++++++++++++++++------------------------ 1 file changed, 32 insertions(+), 29 deletions(-) (limited to 'arch') diff --git a/arch/sh/mm/fault_32.c b/arch/sh/mm/fault_32.c index cc8ddbd..7192594 100644 --- a/arch/sh/mm/fault_32.c +++ b/arch/sh/mm/fault_32.c @@ -15,12 +15,28 @@ #include <linux/mm.h> #include <linux/hardirq.h> #include <linux/kprobes.h> -#include <linux/marker.h> +#include <linux/perf_counter.h> #include <asm/io_trapped.h> #include <asm/system.h> #include <asm/mmu_context.h> #include <asm/tlbflush.h> +static inline int notify_page_fault(struct pt_regs *regs, int trap) +{ + int ret = 0; + +#ifdef CONFIG_KPROBES + if (!user_mode(regs)) { + preempt_disable(); + if (kprobe_running() && kprobe_fault_handler(regs, trap)) + ret = 1; + preempt_enable(); + } +#endif + + return ret; +} + /* * This routine handles page faults. It determines the address, * and the problem, and then passes it off to one of the appropriate @@ -87,13 +103,16 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, return; } + mm = tsk->mm; + + if (unlikely(notify_page_fault(regs, lookup_exception_vector()))) + return; + /* Only enable interrupts if they were on before the fault */ - if ((regs->sr & SR_IMASK) != SR_IMASK) { - trace_hardirqs_on(); + if ((regs->sr & SR_IMASK) != SR_IMASK) local_irq_enable(); - } - mm = tsk->mm; + perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address); /* * If we're in an interrupt or have no user @@ -141,10 +160,15 @@ survive: goto do_sigbus; BUG(); } - if (fault & VM_FAULT_MAJOR) + if (fault & VM_FAULT_MAJOR) { tsk->maj_flt++; - else + perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0, + regs, address); + } else { tsk->min_flt++; + perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0, + regs, address); + } up_read(&mm->mmap_sem); return; @@ -245,22 +269,6 @@ do_sigbus: goto no_context; } -static inline int notify_page_fault(struct pt_regs *regs, int trap) -{ - int ret = 0; - -#ifdef CONFIG_KPROBES - if (!user_mode(regs)) { - preempt_disable(); - if (kprobe_running() && kprobe_fault_handler(regs, trap)) - ret = 1; - preempt_enable(); - } -#endif - - return ret; -} - /* * Called with interrupts disabled. */ @@ -273,12 +281,7 @@ asmlinkage int __kprobes __do_page_fault(struct pt_regs *regs, pmd_t *pmd; pte_t *pte; pte_t entry; - int ret = 0; - - if (notify_page_fault(regs, lookup_exception_vector())) - goto out; - - ret = 1; + int ret = 1; /* * We don't take page faults for P1, P2, and parts of P4, these -- cgit v1.1 From 0ca5921e791fb2011d4d6de787f6485b3900703d Mon Sep 17 00:00:00 2001 From: Ralf Baechle <ralf@linux-mips.org> Date: Fri, 19 Jun 2009 13:51:28 +0100 Subject: MIPS: bug.h Build fix - include <linux/compiler.h>. In the past this file somehow used to be dragged in. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/include/asm/bug.h | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/mips/include/asm/bug.h b/arch/mips/include/asm/bug.h index 08ea468..6cf29c2 100644 --- a/arch/mips/include/asm/bug.h +++ b/arch/mips/include/asm/bug.h @@ -1,6 +1,7 @@ #ifndef __ASM_BUG_H #define __ASM_BUG_H +#include <linux/compiler.h> #include <asm/sgidefs.h> #ifdef CONFIG_BUG -- cgit v1.1 From 631330f5847b3f8a7ea67d689e9f7c56833ccaa6 Mon Sep 17 00:00:00 2001 From: Ralf Baechle <ralf@linux-mips.org> Date: Fri, 19 Jun 2009 14:05:26 +0100 Subject: MIPS: Build fix - include <linux/smp.h> into all smp_processor_id() users. Some of the were relying into smp.h being dragged in by another header which of course is fragile. <asm/cpu-info.h> uses smp_processor_id() only in macros and including smp.h there leads to an include loop, so don't change cpu-info.h. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/cavium-octeon/octeon-irq.c | 2 +- arch/mips/cavium-octeon/setup.c | 1 + arch/mips/include/asm/bugs.h | 1 + arch/mips/include/asm/irq.h | 1 + arch/mips/include/asm/mmu_context.h | 1 + arch/mips/include/asm/smp.h | 1 + arch/mips/include/asm/sn/addrs.h | 1 + arch/mips/jazz/irq.c | 1 + arch/mips/kernel/cevt-bcm1480.c | 1 + arch/mips/kernel/cevt-r4k.c | 1 + arch/mips/kernel/cevt-sb1250.c | 1 + arch/mips/kernel/cevt-smtc.c | 1 + arch/mips/kernel/cpu-probe.c | 1 + arch/mips/kernel/i8253.c | 1 + arch/mips/kernel/irq-gic.c | 1 + arch/mips/kernel/kgdb.c | 1 + arch/mips/kernel/smp-cmp.c | 1 + arch/mips/kernel/smp.c | 1 + arch/mips/kernel/smtc.c | 1 + arch/mips/mm/c-octeon.c | 1 + arch/mips/mm/c-r3k.c | 1 + arch/mips/mm/c-r4k.c | 1 + arch/mips/mm/c-tx39.c | 1 + arch/mips/mm/highmem.c | 1 + arch/mips/mm/init.c | 1 + arch/mips/mm/page.c | 1 + arch/mips/mm/tlb-r3k.c | 1 + arch/mips/mm/tlb-r4k.c | 1 + arch/mips/mm/tlb-r8k.c | 1 + arch/mips/mm/tlbex.c | 1 + arch/mips/mti-malta/malta-int.c | 1 + arch/mips/pci/pci-ip27.c | 1 + arch/mips/pmc-sierra/yosemite/smp.c | 1 + arch/mips/sgi-ip27/ip27-init.c | 1 + arch/mips/sgi-ip27/ip27-irq.c | 1 + arch/mips/sgi-ip27/ip27-timer.c | 1 + arch/mips/sgi-ip27/ip27-xtalk.c | 1 + arch/mips/sibyte/bcm1480/irq.c | 1 + arch/mips/sni/time.c | 1 + 39 files changed, 39 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/cavium-octeon/octeon-irq.c b/arch/mips/cavium-octeon/octeon-irq.c index 8dfa009..3090ee3 100644 --- a/arch/mips/cavium-octeon/octeon-irq.c +++ b/arch/mips/cavium-octeon/octeon-irq.c @@ -7,7 +7,7 @@ */ #include <linux/irq.h> #include <linux/interrupt.h> -#include <linux/hardirq.h> +#include <linux/smp.h> #include <asm/octeon/octeon.h> #include <asm/octeon/cvmx-pexp-defs.h> diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c index 5f4e49b..da55924 100644 --- a/arch/mips/cavium-octeon/setup.c +++ b/arch/mips/cavium-octeon/setup.c @@ -13,6 +13,7 @@ #include <linux/io.h> #include <linux/irq.h> #include <linux/serial.h> +#include <linux/smp.h> #include <linux/types.h> #include <linux/string.h> /* for memset */ #include <linux/tty.h> diff --git a/arch/mips/include/asm/bugs.h b/arch/mips/include/asm/bugs.h index 9dc10df..b160a70 100644 --- a/arch/mips/include/asm/bugs.h +++ b/arch/mips/include/asm/bugs.h @@ -11,6 +11,7 @@ #include <linux/bug.h> #include <linux/delay.h> +#include <linux/smp.h> #include <asm/cpu.h> #include <asm/cpu-info.h> diff --git a/arch/mips/include/asm/irq.h b/arch/mips/include/asm/irq.h index 4f1eed1..09b08d0 100644 --- a/arch/mips/include/asm/irq.h +++ b/arch/mips/include/asm/irq.h @@ -10,6 +10,7 @@ #define _ASM_IRQ_H #include <linux/linkage.h> +#include <linux/smp.h> #include <asm/mipsmtregs.h> diff --git a/arch/mips/include/asm/mmu_context.h b/arch/mips/include/asm/mmu_context.h index d7f3eb0..d3bea88 100644 --- a/arch/mips/include/asm/mmu_context.h +++ b/arch/mips/include/asm/mmu_context.h @@ -13,6 +13,7 @@ #include <linux/errno.h> #include <linux/sched.h> +#include <linux/smp.h> #include <linux/slab.h> #include <asm/cacheflush.h> #include <asm/tlbflush.h> diff --git a/arch/mips/include/asm/smp.h b/arch/mips/include/asm/smp.h index 40e5ef1..2f83fa8 100644 --- a/arch/mips/include/asm/smp.h +++ b/arch/mips/include/asm/smp.h @@ -13,6 +13,7 @@ #include <linux/bitops.h> #include <linux/linkage.h> +#include <linux/smp.h> #include <linux/threads.h> #include <linux/cpumask.h> diff --git a/arch/mips/include/asm/sn/addrs.h b/arch/mips/include/asm/sn/addrs.h index 3a56d90..2367b56 100644 --- a/arch/mips/include/asm/sn/addrs.h +++ b/arch/mips/include/asm/sn/addrs.h @@ -11,6 +11,7 @@ #ifndef __ASSEMBLY__ +#include <linux/smp.h> #include <linux/types.h> #endif /* !__ASSEMBLY__ */ diff --git a/arch/mips/jazz/irq.c b/arch/mips/jazz/irq.c index d9b6a5b..7fd170d 100644 --- a/arch/mips/jazz/irq.c +++ b/arch/mips/jazz/irq.c @@ -10,6 +10,7 @@ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/kernel.h> +#include <linux/smp.h> #include <linux/spinlock.h> #include <asm/irq_cpu.h> diff --git a/arch/mips/kernel/cevt-bcm1480.c b/arch/mips/kernel/cevt-bcm1480.c index a5182a2..e02f79b 100644 --- a/arch/mips/kernel/cevt-bcm1480.c +++ b/arch/mips/kernel/cevt-bcm1480.c @@ -18,6 +18,7 @@ #include <linux/clockchips.h> #include <linux/interrupt.h> #include <linux/percpu.h> +#include <linux/smp.h> #include <asm/addrspace.h> #include <asm/io.h> diff --git a/arch/mips/kernel/cevt-r4k.c b/arch/mips/kernel/cevt-r4k.c index 0015e44..2652362 100644 --- a/arch/mips/kernel/cevt-r4k.c +++ b/arch/mips/kernel/cevt-r4k.c @@ -9,6 +9,7 @@ #include <linux/clockchips.h> #include <linux/interrupt.h> #include <linux/percpu.h> +#include <linux/smp.h> #include <asm/smtc_ipi.h> #include <asm/time.h> diff --git a/arch/mips/kernel/cevt-sb1250.c b/arch/mips/kernel/cevt-sb1250.c index 340f53e..ac5903d 100644 --- a/arch/mips/kernel/cevt-sb1250.c +++ b/arch/mips/kernel/cevt-sb1250.c @@ -18,6 +18,7 @@ #include <linux/clockchips.h> #include <linux/interrupt.h> #include <linux/percpu.h> +#include <linux/smp.h> #include <asm/addrspace.h> #include <asm/io.h> diff --git a/arch/mips/kernel/cevt-smtc.c b/arch/mips/kernel/cevt-smtc.c index df6f5bc..98bd7de 100644 --- a/arch/mips/kernel/cevt-smtc.c +++ b/arch/mips/kernel/cevt-smtc.c @@ -10,6 +10,7 @@ #include <linux/clockchips.h> #include <linux/interrupt.h> #include <linux/percpu.h> +#include <linux/smp.h> #include <asm/smtc_ipi.h> #include <asm/time.h> diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index b13b8eb..1abe990 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -14,6 +14,7 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/ptrace.h> +#include <linux/smp.h> #include <linux/stddef.h> #include <asm/bugs.h> diff --git a/arch/mips/kernel/i8253.c b/arch/mips/kernel/i8253.c index ed20e7f..f7d8d5d 100644 --- a/arch/mips/kernel/i8253.c +++ b/arch/mips/kernel/i8253.c @@ -7,6 +7,7 @@ #include <linux/interrupt.h> #include <linux/jiffies.h> #include <linux/module.h> +#include <linux/smp.h> #include <linux/spinlock.h> #include <asm/delay.h> diff --git a/arch/mips/kernel/irq-gic.c b/arch/mips/kernel/irq-gic.c index 3f43c2e..39000f1 100644 --- a/arch/mips/kernel/irq-gic.c +++ b/arch/mips/kernel/irq-gic.c @@ -2,6 +2,7 @@ #include <linux/bitmap.h> #include <linux/init.h> +#include <linux/smp.h> #include <asm/io.h> #include <asm/gic.h> diff --git a/arch/mips/kernel/kgdb.c b/arch/mips/kernel/kgdb.c index 6e152c8..50c9bb8 100644 --- a/arch/mips/kernel/kgdb.c +++ b/arch/mips/kernel/kgdb.c @@ -26,6 +26,7 @@ #include <linux/kgdb.h> #include <linux/kdebug.h> #include <linux/sched.h> +#include <linux/smp.h> #include <asm/inst.h> #include <asm/fpu.h> #include <asm/cacheflush.h> diff --git a/arch/mips/kernel/smp-cmp.c b/arch/mips/kernel/smp-cmp.c index f27beca..653be06 100644 --- a/arch/mips/kernel/smp-cmp.c +++ b/arch/mips/kernel/smp-cmp.c @@ -20,6 +20,7 @@ #include <linux/kernel.h> #include <linux/sched.h> +#include <linux/smp.h> #include <linux/cpumask.h> #include <linux/interrupt.h> #include <linux/compiler.h> diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c index c937506..58f4679 100644 --- a/arch/mips/kernel/smp.c +++ b/arch/mips/kernel/smp.c @@ -22,6 +22,7 @@ #include <linux/delay.h> #include <linux/init.h> #include <linux/interrupt.h> +#include <linux/smp.h> #include <linux/spinlock.h> #include <linux/threads.h> #include <linux/module.h> diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c index 37d51cd..8a0626c 100644 --- a/arch/mips/kernel/smtc.c +++ b/arch/mips/kernel/smtc.c @@ -20,6 +20,7 @@ #include <linux/clockchips.h> #include <linux/kernel.h> #include <linux/sched.h> +#include <linux/smp.h> #include <linux/cpumask.h> #include <linux/interrupt.h> #include <linux/kernel_stat.h> diff --git a/arch/mips/mm/c-octeon.c b/arch/mips/mm/c-octeon.c index 44d01a0..b165cdc 100644 --- a/arch/mips/mm/c-octeon.c +++ b/arch/mips/mm/c-octeon.c @@ -8,6 +8,7 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/sched.h> +#include <linux/smp.h> #include <linux/mm.h> #include <linux/bitops.h> #include <linux/cpu.h> diff --git a/arch/mips/mm/c-r3k.c b/arch/mips/mm/c-r3k.c index 5500c20..54e5f7b 100644 --- a/arch/mips/mm/c-r3k.c +++ b/arch/mips/mm/c-r3k.c @@ -12,6 +12,7 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/sched.h> +#include <linux/smp.h> #include <linux/mm.h> #include <asm/page.h> diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index 71fe4cb..6721ee2b1 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -13,6 +13,7 @@ #include <linux/kernel.h> #include <linux/linkage.h> #include <linux/sched.h> +#include <linux/smp.h> #include <linux/mm.h> #include <linux/module.h> #include <linux/bitops.h> diff --git a/arch/mips/mm/c-tx39.c b/arch/mips/mm/c-tx39.c index f7c8f9c..6515b44 100644 --- a/arch/mips/mm/c-tx39.c +++ b/arch/mips/mm/c-tx39.c @@ -11,6 +11,7 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/sched.h> +#include <linux/smp.h> #include <linux/mm.h> #include <asm/cacheops.h> diff --git a/arch/mips/mm/highmem.c b/arch/mips/mm/highmem.c index 2b1309b..e274fda 100644 --- a/arch/mips/mm/highmem.c +++ b/arch/mips/mm/highmem.c @@ -1,5 +1,6 @@ #include <linux/module.h> #include <linux/highmem.h> +#include <linux/smp.h> #include <asm/fixmap.h> #include <asm/tlbflush.h> diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c index c551129..0e82050 100644 --- a/arch/mips/mm/init.c +++ b/arch/mips/mm/init.c @@ -13,6 +13,7 @@ #include <linux/module.h> #include <linux/signal.h> #include <linux/sched.h> +#include <linux/smp.h> #include <linux/kernel.h> #include <linux/errno.h> #include <linux/string.h> diff --git a/arch/mips/mm/page.c b/arch/mips/mm/page.c index 48060c6..f5c7375 100644 --- a/arch/mips/mm/page.c +++ b/arch/mips/mm/page.c @@ -10,6 +10,7 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/sched.h> +#include <linux/smp.h> #include <linux/mm.h> #include <linux/module.h> #include <linux/proc_fs.h> diff --git a/arch/mips/mm/tlb-r3k.c b/arch/mips/mm/tlb-r3k.c index 1c0048a..0f5ab23 100644 --- a/arch/mips/mm/tlb-r3k.c +++ b/arch/mips/mm/tlb-r3k.c @@ -13,6 +13,7 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/sched.h> +#include <linux/smp.h> #include <linux/mm.h> #include <asm/page.h> diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c index f60fe51..cee502c 100644 --- a/arch/mips/mm/tlb-r4k.c +++ b/arch/mips/mm/tlb-r4k.c @@ -10,6 +10,7 @@ */ #include <linux/init.h> #include <linux/sched.h> +#include <linux/smp.h> #include <linux/mm.h> #include <linux/hugetlb.h> diff --git a/arch/mips/mm/tlb-r8k.c b/arch/mips/mm/tlb-r8k.c index 4ec95cc..2b82f23 100644 --- a/arch/mips/mm/tlb-r8k.c +++ b/arch/mips/mm/tlb-r8k.c @@ -10,6 +10,7 @@ */ #include <linux/init.h> #include <linux/sched.h> +#include <linux/smp.h> #include <linux/mm.h> #include <asm/cpu.h> diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index 8f606ea..9a17bf8 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -23,6 +23,7 @@ #include <linux/bug.h> #include <linux/kernel.h> #include <linux/types.h> +#include <linux/smp.h> #include <linux/string.h> #include <linux/init.h> diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c index ea17611..b4eaf13 100644 --- a/arch/mips/mti-malta/malta-int.c +++ b/arch/mips/mti-malta/malta-int.c @@ -24,6 +24,7 @@ #include <linux/init.h> #include <linux/irq.h> #include <linux/sched.h> +#include <linux/smp.h> #include <linux/slab.h> #include <linux/interrupt.h> #include <linux/io.h> diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c index dda6f20..a0e726e 100644 --- a/arch/mips/pci/pci-ip27.c +++ b/arch/mips/pci/pci-ip27.c @@ -10,6 +10,7 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/pci.h> +#include <linux/smp.h> #include <asm/sn/arch.h> #include <asm/pci/bridge.h> #include <asm/paccess.h> diff --git a/arch/mips/pmc-sierra/yosemite/smp.c b/arch/mips/pmc-sierra/yosemite/smp.c index f78c29b..8ace277 100644 --- a/arch/mips/pmc-sierra/yosemite/smp.c +++ b/arch/mips/pmc-sierra/yosemite/smp.c @@ -1,5 +1,6 @@ #include <linux/linkage.h> #include <linux/sched.h> +#include <linux/smp.h> #include <asm/pmon.h> #include <asm/titan_dep.h> diff --git a/arch/mips/sgi-ip27/ip27-init.c b/arch/mips/sgi-ip27/ip27-init.c index 4a500e8..51d3a4f 100644 --- a/arch/mips/sgi-ip27/ip27-init.c +++ b/arch/mips/sgi-ip27/ip27-init.c @@ -9,6 +9,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/sched.h> +#include <linux/smp.h> #include <linux/mm.h> #include <linux/module.h> #include <linux/cpumask.h> diff --git a/arch/mips/sgi-ip27/ip27-irq.c b/arch/mips/sgi-ip27/ip27-irq.c index 1bb692a..c1c8e40 100644 --- a/arch/mips/sgi-ip27/ip27-irq.c +++ b/arch/mips/sgi-ip27/ip27-irq.c @@ -18,6 +18,7 @@ #include <linux/ioport.h> #include <linux/timex.h> #include <linux/slab.h> +#include <linux/smp.h> #include <linux/random.h> #include <linux/kernel.h> #include <linux/kernel_stat.h> diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c index f10a7cd..6d0e59f 100644 --- a/arch/mips/sgi-ip27/ip27-timer.c +++ b/arch/mips/sgi-ip27/ip27-timer.c @@ -10,6 +10,7 @@ #include <linux/interrupt.h> #include <linux/kernel_stat.h> #include <linux/param.h> +#include <linux/smp.h> #include <linux/time.h> #include <linux/timex.h> #include <linux/mm.h> diff --git a/arch/mips/sgi-ip27/ip27-xtalk.c b/arch/mips/sgi-ip27/ip27-xtalk.c index 6ae64e8..5e871e7 100644 --- a/arch/mips/sgi-ip27/ip27-xtalk.c +++ b/arch/mips/sgi-ip27/ip27-xtalk.c @@ -9,6 +9,7 @@ #include <linux/init.h> #include <linux/kernel.h> +#include <linux/smp.h> #include <asm/sn/types.h> #include <asm/sn/klconfig.h> #include <asm/sn/hub.h> diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c index 690de06..ba59839 100644 --- a/arch/mips/sibyte/bcm1480/irq.c +++ b/arch/mips/sibyte/bcm1480/irq.c @@ -19,6 +19,7 @@ #include <linux/init.h> #include <linux/linkage.h> #include <linux/interrupt.h> +#include <linux/smp.h> #include <linux/spinlock.h> #include <linux/mm.h> #include <linux/slab.h> diff --git a/arch/mips/sni/time.c b/arch/mips/sni/time.c index 69f5f88..0d9ec1a 100644 --- a/arch/mips/sni/time.c +++ b/arch/mips/sni/time.c @@ -1,5 +1,6 @@ #include <linux/types.h> #include <linux/interrupt.h> +#include <linux/smp.h> #include <linux/time.h> #include <linux/clockchips.h> -- cgit v1.1 From 44eeab67416711db9b84610ef18c99a60415dff8 Mon Sep 17 00:00:00 2001 From: Ralf Baechle <ralf@linux-mips.org> Date: Fri, 19 Jun 2009 15:01:44 +0100 Subject: MIPS: Hibernation: Remove SMP TLB and cacheflushing code. We can't perform any flushes on SMP from swsusp_arch_resume because interrupts are disabled. A cross-CPU flush is unnecessary anyway because all but the local CPU have already been disabled. A local flush is not needed either because we didn't change any mappings. So just delete the code. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/power/hibernate.S | 9 --------- 1 file changed, 9 deletions(-) (limited to 'arch') diff --git a/arch/mips/power/hibernate.S b/arch/mips/power/hibernate.S index 486bd3f..4b8174b 100644 --- a/arch/mips/power/hibernate.S +++ b/arch/mips/power/hibernate.S @@ -43,15 +43,6 @@ LEAF(swsusp_arch_resume) bne t1, t3, 1b PTR_L t0, PBE_NEXT(t0) bnez t0, 0b - /* flush caches to make sure context is in memory */ - PTR_L t0, __flush_cache_all - jalr t0 - /* flush tlb entries */ -#ifdef CONFIG_SMP - jal flush_tlb_all -#else - jal local_flush_tlb_all -#endif PTR_LA t0, saved_regs PTR_L ra, PT_R31(t0) PTR_L sp, PT_R29(t0) -- cgit v1.1 From ab7f6f3010a6c5ae147541168705a446cee511e7 Mon Sep 17 00:00:00 2001 From: Ralf Baechle <ralf@linux-mips.org> Date: Mon, 22 Jun 2009 15:48:27 +0100 Subject: MIPS: MIPSsim: Fix build error if MSC01E_INT_BASE is undefined. This fixes kernel.org bugzilla 13595, see http://bugzilla.kernel.org/show_bug.cgi?id=13595 Reported-by: dvice_null@yahoo.com Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/mipssim/sim_time.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/mips/mipssim/sim_time.c b/arch/mips/mipssim/sim_time.c index 881ecbc..0cea932 100644 --- a/arch/mips/mipssim/sim_time.c +++ b/arch/mips/mipssim/sim_time.c @@ -91,6 +91,7 @@ unsigned __cpuinit get_c0_compare_int(void) mips_cpu_timer_irq = MSC01E_INT_BASE + MSC01E_INT_CPUCTR; } else { #endif + { if (cpu_has_vint) set_vi_handler(cp0_compare_irq, mips_timer_dispatch); mips_cpu_timer_irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq; -- cgit v1.1 From 2e25406fb878e2313a9d8e302ed7ff3c2831198f Mon Sep 17 00:00:00 2001 From: Ralf Baechle <ralf@linux-mips.org> Date: Mon, 22 Jun 2009 16:17:52 +0100 Subject: MIPS: Sibyte: Fix build error if CONFIG_SERIAL_SB1250_DUART is undefined. This fixes kernel.org bugzilla 13596, see http://bugzilla.kernel.org/show_bug.cgi?id=13596 Reported-by: dvice_null@yahoo.com Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/sibyte/common/cfe_console.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/mips/sibyte/common/cfe_console.c b/arch/mips/sibyte/common/cfe_console.c index 81e3d54..1ad2da1 100644 --- a/arch/mips/sibyte/common/cfe_console.c +++ b/arch/mips/sibyte/common/cfe_console.c @@ -51,12 +51,13 @@ static int cfe_console_setup(struct console *cons, char *str) setleds("u0cn"); } else if (!strcmp(consdev, "uart1")) { setleds("u1cn"); + } else #endif #ifdef CONFIG_VGA_CONSOLE - } else if (!strcmp(consdev, "pcconsole0")) { - setleds("pccn"); -#endif + if (!strcmp(consdev, "pcconsole0")) { + setleds("pccn"); } else +#endif return -ENODEV; } return 0; -- cgit v1.1 From 1b2bc75c1bde6581d2694cb3ed7fb06b69685008 Mon Sep 17 00:00:00 2001 From: Ralf Baechle <ralf@linux-mips.org> Date: Tue, 23 Jun 2009 10:00:31 +0100 Subject: MIPS: Add arch generic CPU hotplug Each platform has to add support for CPU hotplugging itself by providing suitable definitions for the cpu_disable and cpu_die of the smp_ops methods and setting SYS_SUPPORTS_HOTPLUG_CPU. A platform should only set SYS_SUPPORTS_HOTPLUG_CPU once all it's smp_ops definitions have the necessary changes. This patch contains the changes to the dummy smp_ops definition for uni-processor systems. Parts of the code contributed by Cavium Inc. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/Kconfig | 11 ++++++++++- arch/mips/include/asm/smp-ops.h | 4 ++++ arch/mips/include/asm/smp.h | 19 +++++++++++++++++++ arch/mips/kernel/process.c | 13 ++++++++++++- arch/mips/kernel/smp-up.c | 16 ++++++++++++++++ arch/mips/kernel/smp.c | 17 +++++++++++++---- arch/mips/kernel/topology.c | 5 ++++- 7 files changed, 78 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index b29f028..eb7e8d7 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -784,8 +784,17 @@ config SYS_HAS_EARLY_PRINTK bool config HOTPLUG_CPU + bool "Support for hot-pluggable CPUs" + depends on SMP && HOTPLUG && SYS_SUPPORTS_HOTPLUG_CPU + help + Say Y here to allow turning CPUs off and on. CPUs can be + controlled through /sys/devices/system/cpu. + (Note: power management support will enable this option + automatically on SMP systems. ) + Say N if you want to disable CPU hotplug. + +config SYS_SUPPORTS_HOTPLUG_CPU bool - default n config I8259 bool diff --git a/arch/mips/include/asm/smp-ops.h b/arch/mips/include/asm/smp-ops.h index 64ffc02..fd54554 100644 --- a/arch/mips/include/asm/smp-ops.h +++ b/arch/mips/include/asm/smp-ops.h @@ -26,6 +26,10 @@ struct plat_smp_ops { void (*boot_secondary)(int cpu, struct task_struct *idle); void (*smp_setup)(void); void (*prepare_cpus)(unsigned int max_cpus); +#ifdef CONFIG_HOTPLUG_CPU + int (*cpu_disable)(void); + void (*cpu_die)(unsigned int cpu); +#endif }; extern void register_smp_ops(struct plat_smp_ops *ops); diff --git a/arch/mips/include/asm/smp.h b/arch/mips/include/asm/smp.h index 2f83fa8..01f813d 100644 --- a/arch/mips/include/asm/smp.h +++ b/arch/mips/include/asm/smp.h @@ -41,6 +41,7 @@ extern int __cpu_logical_map[NR_CPUS]; /* Octeon - Tell another core to flush its icache */ #define SMP_ICACHE_FLUSH 0x4 +extern cpumask_t cpu_callin_map; extern void asmlinkage smp_bootstrap(void); @@ -56,6 +57,24 @@ static inline void smp_send_reschedule(int cpu) mp_ops->send_ipi_single(cpu, SMP_RESCHEDULE_YOURSELF); } +#ifdef CONFIG_HOTPLUG_CPU +static inline int __cpu_disable(void) +{ + extern struct plat_smp_ops *mp_ops; /* private */ + + return mp_ops->cpu_disable(); +} + +static inline void __cpu_die(unsigned int cpu) +{ + extern struct plat_smp_ops *mp_ops; /* private */ + + mp_ops->cpu_die(cpu); +} + +extern void play_dead(void); +#endif + extern asmlinkage void smp_call_function_interrupt(void); extern void arch_send_call_function_single_ipi(int cpu); diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c index 1eaaa45..c09d681 100644 --- a/arch/mips/kernel/process.c +++ b/arch/mips/kernel/process.c @@ -50,10 +50,15 @@ */ void __noreturn cpu_idle(void) { + int cpu; + + /* CPU is going idle. */ + cpu = smp_processor_id(); + /* endless idle loop with no priority at all */ while (1) { tick_nohz_stop_sched_tick(1); - while (!need_resched()) { + while (!need_resched() && cpu_online(cpu)) { #ifdef CONFIG_MIPS_MT_SMTC extern void smtc_idle_loop_hook(void); @@ -62,6 +67,12 @@ void __noreturn cpu_idle(void) if (cpu_wait) (*cpu_wait)(); } +#ifdef CONFIG_HOTPLUG_CPU + if (!cpu_online(cpu) && !cpu_isset(cpu, cpu_callin_map) && + (system_state == SYSTEM_RUNNING || + system_state == SYSTEM_BOOTING)) + play_dead(); +#endif tick_nohz_restart_sched_tick(); preempt_enable_no_resched(); schedule(); diff --git a/arch/mips/kernel/smp-up.c b/arch/mips/kernel/smp-up.c index 878e373..2508d55 100644 --- a/arch/mips/kernel/smp-up.c +++ b/arch/mips/kernel/smp-up.c @@ -55,6 +55,18 @@ static void __init up_prepare_cpus(unsigned int max_cpus) { } +#ifdef CONFIG_HOTPLUG_CPU +static int up_cpu_disable(void) +{ + return -ENOSYS; +} + +static void up_cpu_die(unsigned int cpu) +{ + BUG(); +} +#endif + struct plat_smp_ops up_smp_ops = { .send_ipi_single = up_send_ipi_single, .send_ipi_mask = up_send_ipi_mask, @@ -64,4 +76,8 @@ struct plat_smp_ops up_smp_ops = { .boot_secondary = up_boot_secondary, .smp_setup = up_smp_setup, .prepare_cpus = up_prepare_cpus, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_disable = up_cpu_disable, + .cpu_die = up_cpu_die, +#endif }; diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c index 58f4679..bc7d9b0 100644 --- a/arch/mips/kernel/smp.c +++ b/arch/mips/kernel/smp.c @@ -45,7 +45,7 @@ #include <asm/mipsmtregs.h> #endif /* CONFIG_MIPS_MT_SMTC */ -static volatile cpumask_t cpu_callin_map; /* Bitmask of started secondaries */ +volatile cpumask_t cpu_callin_map; /* Bitmask of started secondaries */ int __cpu_number_map[NR_CPUS]; /* Map physical to logical */ int __cpu_logical_map[NR_CPUS]; /* Map logical to physical */ @@ -201,6 +201,8 @@ void __devinit smp_prepare_boot_cpu(void) * and keep control until "cpu_online(cpu)" is set. Note: cpu is * physical, not logical. */ +static struct task_struct *cpu_idle_thread[NR_CPUS]; + int __cpuinit __cpu_up(unsigned int cpu) { struct task_struct *idle; @@ -210,9 +212,16 @@ int __cpuinit __cpu_up(unsigned int cpu) * The following code is purely to make sure * Linux can schedule processes on this slave. */ - idle = fork_idle(cpu); - if (IS_ERR(idle)) - panic(KERN_ERR "Fork failed for CPU %d", cpu); + if (!cpu_idle_thread[cpu]) { + idle = fork_idle(cpu); + cpu_idle_thread[cpu] = idle; + + if (IS_ERR(idle)) + panic(KERN_ERR "Fork failed for CPU %d", cpu); + } else { + idle = cpu_idle_thread[cpu]; + init_idle(idle, cpu); + } mp_ops->boot_secondary(cpu, idle); diff --git a/arch/mips/kernel/topology.c b/arch/mips/kernel/topology.c index 660e44e..cf3eb61 100644 --- a/arch/mips/kernel/topology.c +++ b/arch/mips/kernel/topology.c @@ -17,7 +17,10 @@ static int __init topology_init(void) #endif /* CONFIG_NUMA */ for_each_present_cpu(i) { - ret = register_cpu(&per_cpu(cpu_devices, i), i); + struct cpu *c = &per_cpu(cpu_devices, i); + + c->hotpluggable = 1; + ret = register_cpu(c, i); if (ret) printk(KERN_WARNING "topology_init: register_cpu %d " "failed (%d)\n", i, ret); -- cgit v1.1 From 9801b321ecdb6708365b6825bf728c8e433fca00 Mon Sep 17 00:00:00 2001 From: Ralf Baechle <ralf@linux-mips.org> Date: Tue, 23 Jun 2009 10:20:56 +0100 Subject: MIPS: SMP: Allow suspend and hibernation if CPU hotplug is available The SMP implementation of suspend and hibernate depends on CPU hotplugging. In the past we didn't have CPU hotplug so suspend and hibernation were not possible on SMP systems. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index eb7e8d7..3cce4ed 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -2145,11 +2145,11 @@ menu "Power management options" config ARCH_HIBERNATION_POSSIBLE def_bool y - depends on !SMP + depends on SYS_SUPPORTS_HOTPLUG_CPU config ARCH_SUSPEND_POSSIBLE def_bool y - depends on !SMP + depends on SYS_SUPPORTS_HOTPLUG_CPU source "kernel/power/Kconfig" -- cgit v1.1 From 773cb77d0e32f0a3c36edf5aaeb9642c18038cd2 Mon Sep 17 00:00:00 2001 From: Ralf Baechle <ralf@linux-mips.org> Date: Tue, 23 Jun 2009 10:36:38 +0100 Subject: MIPS: Cavium: Add CPU hotplugging code. Thanks to Cavium Inc. for the code contribution and help. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/Kconfig | 2 + arch/mips/cavium-octeon/octeon-irq.c | 59 +++++++++ arch/mips/cavium-octeon/octeon_boot.h | 70 ++++++++++ arch/mips/cavium-octeon/smp.c | 234 +++++++++++++++++++++++++++++++++- arch/mips/include/asm/smp.h | 2 +- 5 files changed, 365 insertions(+), 2 deletions(-) create mode 100644 arch/mips/cavium-octeon/octeon_boot.h (limited to 'arch') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 3cce4ed..8c4be1f 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -601,6 +601,7 @@ config CAVIUM_OCTEON_SIMULATOR select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_HIGHMEM + select SYS_SUPPORTS_HOTPLUG_CPU select SYS_HAS_CPU_CAVIUM_OCTEON help The Octeon simulator is software performance model of the Cavium @@ -615,6 +616,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_HIGHMEM + select SYS_SUPPORTS_HOTPLUG_CPU select SYS_HAS_EARLY_PRINTK select SYS_HAS_CPU_CAVIUM_OCTEON select SWAP_IO_SPACE diff --git a/arch/mips/cavium-octeon/octeon-irq.c b/arch/mips/cavium-octeon/octeon-irq.c index 3090ee3..384f184 100644 --- a/arch/mips/cavium-octeon/octeon-irq.c +++ b/arch/mips/cavium-octeon/octeon-irq.c @@ -501,3 +501,62 @@ asmlinkage void plat_irq_dispatch(void) } } } + +#ifdef CONFIG_HOTPLUG_CPU +static int is_irq_enabled_on_cpu(unsigned int irq, unsigned int cpu) +{ + unsigned int isset; +#ifdef CONFIG_SMP + int coreid = cpu_logical_map(cpu); +#else + int coreid = cvmx_get_core_num(); +#endif + int bit = (irq < OCTEON_IRQ_WDOG0) ? + irq - OCTEON_IRQ_WORKQ0 : irq - OCTEON_IRQ_WDOG0; + if (irq < 64) { + isset = (cvmx_read_csr(CVMX_CIU_INTX_EN0(coreid * 2)) & + (1ull << bit)) >> bit; + } else { + isset = (cvmx_read_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1)) & + (1ull << bit)) >> bit; + } + return isset; +} + +void fixup_irqs(void) +{ + int irq; + + for (irq = OCTEON_IRQ_SW0; irq <= OCTEON_IRQ_TIMER; irq++) + octeon_irq_core_disable_local(irq); + + for (irq = OCTEON_IRQ_WORKQ0; irq <= OCTEON_IRQ_GPIO15; irq++) { + if (is_irq_enabled_on_cpu(irq, smp_processor_id())) { + /* ciu irq migrates to next cpu */ + octeon_irq_chip_ciu0.disable(irq); + octeon_irq_ciu0_set_affinity(irq, &cpu_online_map); + } + } + +#if 0 + for (irq = OCTEON_IRQ_MBOX0; irq <= OCTEON_IRQ_MBOX1; irq++) + octeon_irq_mailbox_mask(irq); +#endif + for (irq = OCTEON_IRQ_UART0; irq <= OCTEON_IRQ_BOOTDMA; irq++) { + if (is_irq_enabled_on_cpu(irq, smp_processor_id())) { + /* ciu irq migrates to next cpu */ + octeon_irq_chip_ciu0.disable(irq); + octeon_irq_ciu0_set_affinity(irq, &cpu_online_map); + } + } + + for (irq = OCTEON_IRQ_UART2; irq <= OCTEON_IRQ_RESERVED135; irq++) { + if (is_irq_enabled_on_cpu(irq, smp_processor_id())) { + /* ciu irq migrates to next cpu */ + octeon_irq_chip_ciu1.disable(irq); + octeon_irq_ciu1_set_affinity(irq, &cpu_online_map); + } + } +} + +#endif /* CONFIG_HOTPLUG_CPU */ diff --git a/arch/mips/cavium-octeon/octeon_boot.h b/arch/mips/cavium-octeon/octeon_boot.h new file mode 100644 index 0000000..0f7f84a --- /dev/null +++ b/arch/mips/cavium-octeon/octeon_boot.h @@ -0,0 +1,70 @@ +/* + * (C) Copyright 2004, 2005 Cavium Networks + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __OCTEON_BOOT_H__ +#define __OCTEON_BOOT_H__ + +#include <linux/types.h> + +struct boot_init_vector { + uint32_t stack_addr; + uint32_t code_addr; + uint32_t app_start_func_addr; + uint32_t k0_val; + uint32_t flags; + uint32_t boot_info_addr; + uint32_t pad; + uint32_t pad2; +}; + +/* similar to bootloader's linux_app_boot_info but without global data */ +struct linux_app_boot_info { + uint32_t labi_signature; + uint32_t start_core0_addr; + uint32_t avail_coremask; + uint32_t pci_console_active; + uint32_t icache_prefetch_disable; + uint32_t InitTLBStart_addr; + uint32_t start_app_addr; + uint32_t cur_exception_base; + uint32_t no_mark_private_data; + uint32_t compact_flash_common_base_addr; + uint32_t compact_flash_attribute_base_addr; + uint32_t led_display_base_addr; +}; + +/* If not to copy a lot of bootloader's structures + here is only offset of requested member */ +#define AVAIL_COREMASK_OFFSET_IN_LINUX_APP_BOOT_BLOCK 0x765c + +/* hardcoded in bootloader */ +#define LABI_ADDR_IN_BOOTLOADER 0x700 + +#define LINUX_APP_BOOT_BLOCK_NAME "linux-app-boot" + +#define LABI_SIGNATURE 0xAABBCCDD + +/* from uboot-headers/octeon_mem_map.h */ +#define EXCEPTION_BASE_INCR (4 * 1024) + /* Increment size for exception base addresses (4k minimum) */ +#define EXCEPTION_BASE_BASE 0 +#define BOOTLOADER_PRIV_DATA_BASE (EXCEPTION_BASE_BASE + 0x800) +#define BOOTLOADER_BOOT_VECTOR (BOOTLOADER_PRIV_DATA_BASE) + +#endif /* __OCTEON_BOOT_H__ */ diff --git a/arch/mips/cavium-octeon/smp.c b/arch/mips/cavium-octeon/smp.c index 24e0ad6..0b891a9 100644 --- a/arch/mips/cavium-octeon/smp.c +++ b/arch/mips/cavium-octeon/smp.c @@ -5,6 +5,7 @@ * * Copyright (C) 2004-2008 Cavium Networks */ +#include <linux/cpu.h> #include <linux/init.h> #include <linux/delay.h> #include <linux/smp.h> @@ -19,10 +20,16 @@ #include <asm/octeon/octeon.h> +#include "octeon_boot.h" + volatile unsigned long octeon_processor_boot = 0xff; volatile unsigned long octeon_processor_sp; volatile unsigned long octeon_processor_gp; +#ifdef CONFIG_HOTPLUG_CPU +static unsigned int InitTLBStart_addr; +#endif + static irqreturn_t mailbox_interrupt(int irq, void *dev_id) { const int coreid = cvmx_get_core_num(); @@ -67,8 +74,28 @@ static inline void octeon_send_ipi_mask(cpumask_t mask, unsigned int action) } /** - * Detect available CPUs, populate phys_cpu_present_map + * Detect available CPUs, populate cpu_possible_map */ +static void octeon_smp_hotplug_setup(void) +{ +#ifdef CONFIG_HOTPLUG_CPU + uint32_t labi_signature; + + labi_signature = + cvmx_read64_uint32(CVMX_ADD_SEG(CVMX_MIPS_SPACE_XKPHYS, + LABI_ADDR_IN_BOOTLOADER + + offsetof(struct linux_app_boot_info, + labi_signature))); + if (labi_signature != LABI_SIGNATURE) + pr_err("The bootloader version on this board is incorrect\n"); + InitTLBStart_addr = + cvmx_read64_uint32(CVMX_ADD_SEG(CVMX_MIPS_SPACE_XKPHYS, + LABI_ADDR_IN_BOOTLOADER + + offsetof(struct linux_app_boot_info, + InitTLBStart_addr))); +#endif +} + static void octeon_smp_setup(void) { const int coreid = cvmx_get_core_num(); @@ -91,6 +118,9 @@ static void octeon_smp_setup(void) cpus++; } } + cpu_present_map = cpu_possible_map; + + octeon_smp_hotplug_setup(); } /** @@ -128,6 +158,17 @@ static void octeon_init_secondary(void) const int coreid = cvmx_get_core_num(); union cvmx_ciu_intx_sum0 interrupt_enable; +#ifdef CONFIG_HOTPLUG_CPU + unsigned int cur_exception_base; + + cur_exception_base = cvmx_read64_uint32( + CVMX_ADD_SEG(CVMX_MIPS_SPACE_XKPHYS, + LABI_ADDR_IN_BOOTLOADER + + offsetof(struct linux_app_boot_info, + cur_exception_base))); + /* cur_exception_base is incremented in bootloader after setting */ + write_c0_ebase((unsigned int)(cur_exception_base - EXCEPTION_BASE_INCR)); +#endif octeon_check_cpu_bist(); octeon_init_cvmcount(); /* @@ -199,6 +240,193 @@ static void octeon_cpus_done(void) #endif } +#ifdef CONFIG_HOTPLUG_CPU + +/* State of each CPU. */ +DEFINE_PER_CPU(int, cpu_state); + +extern void fixup_irqs(void); + +static DEFINE_SPINLOCK(smp_reserve_lock); + +static int octeon_cpu_disable(void) +{ + unsigned int cpu = smp_processor_id(); + + if (cpu == 0) + return -EBUSY; + + spin_lock(&smp_reserve_lock); + + cpu_clear(cpu, cpu_online_map); + cpu_clear(cpu, cpu_callin_map); + local_irq_disable(); + fixup_irqs(); + local_irq_enable(); + + flush_cache_all(); + local_flush_tlb_all(); + + spin_unlock(&smp_reserve_lock); + + return 0; +} + +static void octeon_cpu_die(unsigned int cpu) +{ + int coreid = cpu_logical_map(cpu); + uint32_t avail_coremask; + struct cvmx_bootmem_named_block_desc *block_desc; + +#ifdef CONFIG_CAVIUM_OCTEON_WATCHDOG + /* Disable the watchdog */ + cvmx_ciu_wdogx_t ciu_wdog; + ciu_wdog.u64 = cvmx_read_csr(CVMX_CIU_WDOGX(cpu)); + ciu_wdog.s.mode = 0; + cvmx_write_csr(CVMX_CIU_WDOGX(cpu), ciu_wdog.u64); +#endif + + while (per_cpu(cpu_state, cpu) != CPU_DEAD) + cpu_relax(); + + /* + * This is a bit complicated strategics of getting/settig available + * cores mask, copied from bootloader + */ + /* LINUX_APP_BOOT_BLOCK is initialized in bootoct binary */ + block_desc = cvmx_bootmem_find_named_block(LINUX_APP_BOOT_BLOCK_NAME); + + if (!block_desc) { + avail_coremask = + cvmx_read64_uint32(CVMX_ADD_SEG(CVMX_MIPS_SPACE_XKPHYS, + LABI_ADDR_IN_BOOTLOADER + + offsetof + (struct linux_app_boot_info, + avail_coremask))); + } else { /* alternative, already initialized */ + avail_coremask = + cvmx_read64_uint32(CVMX_ADD_SEG(CVMX_MIPS_SPACE_XKPHYS, + block_desc->base_addr + + AVAIL_COREMASK_OFFSET_IN_LINUX_APP_BOOT_BLOCK)); + } + + avail_coremask |= 1 << coreid; + + /* Setting avail_coremask for bootoct binary */ + if (!block_desc) { + cvmx_write64_uint32(CVMX_ADD_SEG(CVMX_MIPS_SPACE_XKPHYS, + LABI_ADDR_IN_BOOTLOADER + + offsetof(struct linux_app_boot_info, + avail_coremask)), + avail_coremask); + } else { + cvmx_write64_uint32(CVMX_ADD_SEG(CVMX_MIPS_SPACE_XKPHYS, + block_desc->base_addr + + AVAIL_COREMASK_OFFSET_IN_LINUX_APP_BOOT_BLOCK), + avail_coremask); + } + + pr_info("Reset core %d. Available Coremask = %x \n", coreid, + avail_coremask); + cvmx_write_csr(CVMX_CIU_PP_RST, 1 << coreid); + cvmx_write_csr(CVMX_CIU_PP_RST, 0); +} + +void play_dead(void) +{ + int coreid = cvmx_get_core_num(); + + idle_task_exit(); + octeon_processor_boot = 0xff; + per_cpu(cpu_state, coreid) = CPU_DEAD; + + while (1) /* core will be reset here */ + ; +} + +extern void kernel_entry(unsigned long arg1, ...); + +static void start_after_reset(void) +{ + kernel_entry(0, 0, 0); /* set a2 = 0 for secondary core */ +} + +int octeon_update_boot_vector(unsigned int cpu) +{ + + int coreid = cpu_logical_map(cpu); + unsigned int avail_coremask; + struct cvmx_bootmem_named_block_desc *block_desc; + struct boot_init_vector *boot_vect = + (struct boot_init_vector *) cvmx_phys_to_ptr(0x0 + + BOOTLOADER_BOOT_VECTOR); + + block_desc = cvmx_bootmem_find_named_block(LINUX_APP_BOOT_BLOCK_NAME); + + if (!block_desc) { + avail_coremask = + cvmx_read64_uint32(CVMX_ADD_SEG(CVMX_MIPS_SPACE_XKPHYS, + LABI_ADDR_IN_BOOTLOADER + + offsetof(struct linux_app_boot_info, + avail_coremask))); + } else { /* alternative, already initialized */ + avail_coremask = + cvmx_read64_uint32(CVMX_ADD_SEG(CVMX_MIPS_SPACE_XKPHYS, + block_desc->base_addr + + AVAIL_COREMASK_OFFSET_IN_LINUX_APP_BOOT_BLOCK)); + } + + if (!(avail_coremask & (1 << coreid))) { + /* core not available, assume, that catched by simple-executive */ + cvmx_write_csr(CVMX_CIU_PP_RST, 1 << coreid); + cvmx_write_csr(CVMX_CIU_PP_RST, 0); + } + + boot_vect[coreid].app_start_func_addr = + (uint32_t) (unsigned long) start_after_reset; + boot_vect[coreid].code_addr = InitTLBStart_addr; + + CVMX_SYNC; + + cvmx_write_csr(CVMX_CIU_NMI, (1 << coreid) & avail_coremask); + + return 0; +} + +static int __cpuinit octeon_cpu_callback(struct notifier_block *nfb, + unsigned long action, void *hcpu) +{ + unsigned int cpu = (unsigned long)hcpu; + + switch (action) { + case CPU_UP_PREPARE: + octeon_update_boot_vector(cpu); + break; + case CPU_ONLINE: + pr_info("Cpu %d online\n", cpu); + break; + case CPU_DEAD: + break; + } + + return NOTIFY_OK; +} + +static struct notifier_block __cpuinitdata octeon_cpu_notifier = { + .notifier_call = octeon_cpu_callback, +}; + +static int __cpuinit register_cavium_notifier(void) +{ + register_hotcpu_notifier(&octeon_cpu_notifier); + + return 0; +} + +late_initcall(register_cavium_notifier); + +#endif /* CONFIG_HOTPLUG_CPU */ + struct plat_smp_ops octeon_smp_ops = { .send_ipi_single = octeon_send_ipi_single, .send_ipi_mask = octeon_send_ipi_mask, @@ -208,4 +436,8 @@ struct plat_smp_ops octeon_smp_ops = { .boot_secondary = octeon_boot_secondary, .smp_setup = octeon_smp_setup, .prepare_cpus = octeon_prepare_cpus, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_disable = octeon_cpu_disable, + .cpu_die = octeon_cpu_die, +#endif }; diff --git a/arch/mips/include/asm/smp.h b/arch/mips/include/asm/smp.h index 01f813d..aaa2d4a 100644 --- a/arch/mips/include/asm/smp.h +++ b/arch/mips/include/asm/smp.h @@ -41,7 +41,7 @@ extern int __cpu_logical_map[NR_CPUS]; /* Octeon - Tell another core to flush its icache */ #define SMP_ICACHE_FLUSH 0x4 -extern cpumask_t cpu_callin_map; +extern volatile cpumask_t cpu_callin_map; extern void asmlinkage smp_bootstrap(void); -- cgit v1.1 From 163b2f0ba93e9298b3d5fff2337d860c3872ec60 Mon Sep 17 00:00:00 2001 From: Paul Mundt <lethal@linux-sh.org> Date: Thu, 25 Jun 2009 02:49:03 +0900 Subject: sh64: Hook up page fault events for software perf counters. sh64 can use these as well, so tie them up there as well. Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/mm/tlbflush_64.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/sh/mm/tlbflush_64.c b/arch/sh/mm/tlbflush_64.c index fcbb6e1..3ce40ea 100644 --- a/arch/sh/mm/tlbflush_64.c +++ b/arch/sh/mm/tlbflush_64.c @@ -3,7 +3,7 @@ * * Copyright (C) 2000, 2001 Paolo Alberelli * Copyright (C) 2003 Richard Curnow (/proc/tlb, bug fixes) - * Copyright (C) 2003 Paul Mundt + * Copyright (C) 2003 - 2009 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -20,6 +20,7 @@ #include <linux/mman.h> #include <linux/mm.h> #include <linux/smp.h> +#include <linux/perf_counter.h> #include <linux/interrupt.h> #include <asm/system.h> #include <asm/io.h> @@ -115,6 +116,8 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long writeaccess, /* Not an IO address, so reenable interrupts */ local_irq_enable(); + perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address); + /* * If we're in an interrupt or have no user * context, we must not take the fault.. @@ -195,10 +198,16 @@ survive: goto do_sigbus; BUG(); } - if (fault & VM_FAULT_MAJOR) + + if (fault & VM_FAULT_MAJOR) { tsk->maj_flt++; - else + perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0, + regs, address); + } else { tsk->min_flt++; + perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0, + regs, address); + } /* If we get here, the page fault has been handled. Do the TLB refill now from the newly-setup PTE, to avoid having to fault again right -- cgit v1.1 From 236e946b53ffd5e2f5d7e6abebbe72a9f0826d15 Mon Sep 17 00:00:00 2001 From: Linus Torvalds <torvalds@linux-foundation.org> Date: Wed, 24 Jun 2009 16:23:03 -0700 Subject: Revert "PCI: use ACPI _CRS data by default" This reverts commit 9e9f46c44e487af0a82eb61b624553e2f7118f5b. Quoting from the commit message: "At this point, it seems to solve more problems than it causes, so let's try using it by default. It's an easy revert if it ends up causing trouble." And guess what? The _CRS code causes trouble. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> --- arch/x86/include/asm/pci_x86.h | 2 +- arch/x86/pci/acpi.c | 2 +- arch/x86/pci/amd_bus.c | 2 +- arch/x86/pci/common.c | 4 ++-- 4 files changed, 5 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/pci_x86.h b/arch/x86/include/asm/pci_x86.h index d419f5c..b399988 100644 --- a/arch/x86/include/asm/pci_x86.h +++ b/arch/x86/include/asm/pci_x86.h @@ -25,7 +25,7 @@ #define PCI_BIOS_IRQ_SCAN 0x2000 #define PCI_ASSIGN_ALL_BUSSES 0x4000 #define PCI_CAN_SKIP_ISA_ALIGN 0x8000 -#define PCI_NO_ROOT_CRS 0x10000 +#define PCI_USE__CRS 0x10000 #define PCI_CHECK_ENABLE_AMD_MMCONF 0x20000 #define PCI_HAS_IO_ECS 0x40000 #define PCI_NOASSIGN_ROMS 0x80000 diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c index 16c3fda..b26626d 100644 --- a/arch/x86/pci/acpi.c +++ b/arch/x86/pci/acpi.c @@ -238,7 +238,7 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do #endif } - if (bus && !(pci_probe & PCI_NO_ROOT_CRS)) + if (bus && (pci_probe & PCI_USE__CRS)) get_current_resources(device, busnum, domain, bus); return bus; } diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c index 2255f88..f893d6a 100644 --- a/arch/x86/pci/amd_bus.c +++ b/arch/x86/pci/amd_bus.c @@ -101,7 +101,7 @@ void x86_pci_root_bus_res_quirks(struct pci_bus *b) struct pci_root_info *info; /* don't go for it if _CRS is used */ - if (!(pci_probe & PCI_NO_ROOT_CRS)) + if (pci_probe & PCI_USE__CRS) return; /* if only one root bus, don't need to anything */ diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c index 4740119..2202b62 100644 --- a/arch/x86/pci/common.c +++ b/arch/x86/pci/common.c @@ -515,8 +515,8 @@ char * __devinit pcibios_setup(char *str) } else if (!strcmp(str, "assign-busses")) { pci_probe |= PCI_ASSIGN_ALL_BUSSES; return NULL; - } else if (!strcmp(str, "nocrs")) { - pci_probe |= PCI_NO_ROOT_CRS; + } else if (!strcmp(str, "use_crs")) { + pci_probe |= PCI_USE__CRS; return NULL; } else if (!strcmp(str, "earlydump")) { pci_early_dump_regs = 1; -- cgit v1.1 From 1fbcf37128cc19bd67d9a736fb634dc444e907d7 Mon Sep 17 00:00:00 2001 From: Paul Mundt <lethal@linux-sh.org> Date: Thu, 25 Jun 2009 21:17:19 +0900 Subject: sh: Kill off unused DEBUG_BOOTMEM symbol. This was killed off in generic code some time ago, kill off the left over symbol. Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/Kconfig.debug | 4 ---- 1 file changed, 4 deletions(-) (limited to 'arch') diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug index 8ece0b5..39224b5 100644 --- a/arch/sh/Kconfig.debug +++ b/arch/sh/Kconfig.debug @@ -61,10 +61,6 @@ config EARLY_PRINTK select both the EARLY_SCIF_CONSOLE and SH_STANDARD_BIOS, using the kernel command line option to toggle back and forth. -config DEBUG_BOOTMEM - depends on DEBUG_KERNEL - bool "Debug BOOTMEM initialization" - config DEBUG_STACKOVERFLOW bool "Check for stack overflows" depends on DEBUG_KERNEL && SUPERH32 -- cgit v1.1 From 7aa5514e7170c6179272bc638a980adc1738fd29 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen <aaro.koskinen@nokia.com> Date: Mon, 22 Jun 2009 09:23:36 +0100 Subject: [ARM] 5560/1: Avoid buffer overrun in case of an invalid IRQ handle_bad_irq() expects the IRQ number to be valid (used for statistics), so it cannot be called with an illegal vector. The problem was reported by a static analysis tool. The change makes bad_irq_desc redundant, so delete it. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> --- arch/arm/kernel/irq.c | 24 ++++++------------------ 1 file changed, 6 insertions(+), 18 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 096f600..b7c3490 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -98,17 +98,6 @@ unlock: return 0; } -/* Handle bad interrupts */ -static struct irq_desc bad_irq_desc = { - .handle_irq = handle_bad_irq, - .lock = __SPIN_LOCK_UNLOCKED(bad_irq_desc.lock), -}; - -#ifdef CONFIG_CPUMASK_OFFSTACK -/* We are not allocating bad_irq_desc.affinity or .pending_mask */ -#error "ARM architecture does not support CONFIG_CPUMASK_OFFSTACK." -#endif - /* * do_IRQ handles all hardware IRQ's. Decoded IRQs should not * come via this function. Instead, they should provide their @@ -124,10 +113,13 @@ asmlinkage void __exception asm_do_IRQ(unsigned int irq, struct pt_regs *regs) * Some hardware gives randomly wrong interrupts. Rather * than crashing, do something sensible. */ - if (irq >= NR_IRQS) - handle_bad_irq(irq, &bad_irq_desc); - else + if (unlikely(irq >= NR_IRQS)) { + if (printk_ratelimit()) + printk(KERN_WARNING "Bad IRQ%u\n", irq); + ack_bad_irq(irq); + } else { generic_handle_irq(irq); + } /* AT91 specific workaround */ irq_finish(irq); @@ -165,10 +157,6 @@ void __init init_IRQ(void) for (irq = 0; irq < NR_IRQS; irq++) irq_desc[irq].status |= IRQ_NOREQUEST | IRQ_NOPROBE; -#ifdef CONFIG_SMP - cpumask_setall(bad_irq_desc.affinity); - bad_irq_desc.node = smp_processor_id(); -#endif init_arch_irq(); } -- cgit v1.1 From f6430a938dc6d77e33722aaf6a58382b3423935d Mon Sep 17 00:00:00 2001 From: Linus Walleij <linus.walleij@stericsson.com> Date: Wed, 24 Jun 2009 23:38:56 +0100 Subject: [ARM] 5565/2: Use PAGE_SIZE and RO_DATA() in link script Update the link script for ARM to use PAGE_SIZE instead of hard- coded 4096. Also the old RODATA macro is deprecated for the RO_DATA(PAGE_SIZE) macro. As a consequence the PAGE_SIZE was changed from (1UL << PAGE_SHIFT) to (_AC(1,UL) << PAGE_SHIFT) because the linker does not understand the "UL" suffix to numeric constants. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> --- arch/arm/include/asm/page.h | 2 +- arch/arm/kernel/vmlinux.lds.S | 15 ++++++++------- 2 files changed, 9 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h index be962c1..9c746af 100644 --- a/arch/arm/include/asm/page.h +++ b/arch/arm/include/asm/page.h @@ -12,7 +12,7 @@ /* PAGE_SHIFT determines the page size */ #define PAGE_SHIFT 12 -#define PAGE_SIZE (1UL << PAGE_SHIFT) +#define PAGE_SIZE (_AC(1,UL) << PAGE_SHIFT) #define PAGE_MASK (~(PAGE_SIZE-1)) #ifndef __ASSEMBLY__ diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index 4340bf3..6937102 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -6,6 +6,7 @@ #include <asm-generic/vmlinux.lds.h> #include <asm/thread_info.h> #include <asm/memory.h> +#include <asm/page.h> OUTPUT_ARCH(arm) ENTRY(stext) @@ -63,7 +64,7 @@ SECTIONS usr/built-in.o(.init.ramfs) __initramfs_end = .; #endif - . = ALIGN(4096); + . = ALIGN(PAGE_SIZE); __per_cpu_load = .; __per_cpu_start = .; *(.data.percpu.page_aligned) @@ -73,7 +74,7 @@ SECTIONS #ifndef CONFIG_XIP_KERNEL __init_begin = _stext; INIT_DATA - . = ALIGN(4096); + . = ALIGN(PAGE_SIZE); __init_end = .; #endif } @@ -118,7 +119,7 @@ SECTIONS *(.got) /* Global offset table */ } - RODATA + RO_DATA(PAGE_SIZE) _etext = .; /* End of text and rodata section */ @@ -158,17 +159,17 @@ SECTIONS *(.data.init_task) #ifdef CONFIG_XIP_KERNEL - . = ALIGN(4096); + . = ALIGN(PAGE_SIZE); __init_begin = .; INIT_DATA - . = ALIGN(4096); + . = ALIGN(PAGE_SIZE); __init_end = .; #endif - . = ALIGN(4096); + . = ALIGN(PAGE_SIZE); __nosave_begin = .; *(.data.nosave) - . = ALIGN(4096); + . = ALIGN(PAGE_SIZE); __nosave_end = .; /* -- cgit v1.1 From ab420e6d9c2511b862d753b70efb4e979faa0714 Mon Sep 17 00:00:00 2001 From: Paul Menage <menage@google.com> Date: Thu, 25 Jun 2009 00:17:15 -0700 Subject: UML: Fix some apparent bitrot UML: Fix some apparent bitrot - migration of net_device methods into net_device_ops - dma_sync_single() changes Signed-off-by: Paul Menage <menage@google.com> Acked-by: Amerigo Wang <xiyou.wangcong@gmail.com> -- This version is split from my earlier patch, including just the portions that ar required for Linus' tree. Fixes the following compile errors: include/linux/dma-mapping.h:113: error: redefinition of 'dma_sync_single' arch/um/include/asm/dma-mapping.h:84: error: previous definition of 'dma_sync_single' was here include/linux/dma-mapping.h: In function 'dma_sync_single': include/linux/dma-mapping.h:117: error: implicit declaration of function 'dma_sync_single_for_cpu' include/linux/dma-mapping.h: At top level: include/linux/dma-mapping.h:120: error: redefinition of 'dma_sync_sg' arch/um/include/asm/dma-mapping.h:91: error: previous definition of 'dma_sync_sg' was here include/linux/dma-mapping.h: In function 'dma_sync_sg': include/linux/dma-mapping.h:124: error: implicit declaration of function 'dma_sync_sg_for_cpu' arch/um/drivers/slirp_kern.c: In function 'slirp_init': arch/um/drivers/slirp_kern.c:35: error: 'struct net_device' has no member named 'init' Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> --- arch/um/drivers/slip_kern.c | 1 - arch/um/drivers/slirp_kern.c | 1 - arch/um/include/asm/dma-mapping.h | 4 ++-- 3 files changed, 2 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/um/drivers/slip_kern.c b/arch/um/drivers/slip_kern.c index 5ec1756..dd2aadc 100644 --- a/arch/um/drivers/slip_kern.c +++ b/arch/um/drivers/slip_kern.c @@ -30,7 +30,6 @@ static void slip_init(struct net_device *dev, void *data) slip_proto_init(&spri->slip); - dev->init = NULL; dev->hard_header_len = 0; dev->header_ops = NULL; dev->addr_len = 0; diff --git a/arch/um/drivers/slirp_kern.c b/arch/um/drivers/slirp_kern.c index f15a6e7..e376284 100644 --- a/arch/um/drivers/slirp_kern.c +++ b/arch/um/drivers/slirp_kern.c @@ -32,7 +32,6 @@ void slirp_init(struct net_device *dev, void *data) slip_proto_init(&spri->slip); - dev->init = NULL; dev->hard_header_len = 0; dev->header_ops = NULL; dev->addr_len = 0; diff --git a/arch/um/include/asm/dma-mapping.h b/arch/um/include/asm/dma-mapping.h index 90fc708..378de4b 100644 --- a/arch/um/include/asm/dma-mapping.h +++ b/arch/um/include/asm/dma-mapping.h @@ -79,14 +79,14 @@ dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries, } static inline void -dma_sync_single(struct device *dev, dma_addr_t dma_handle, size_t size, +dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size, enum dma_data_direction direction) { BUG(); } static inline void -dma_sync_sg(struct device *dev, struct scatterlist *sg, int nelems, +dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems, enum dma_data_direction direction) { BUG(); -- cgit v1.1 From 194002b274e9169a04beb1b23dcc132159bb566c Mon Sep 17 00:00:00 2001 From: Peter Zijlstra <a.p.zijlstra@chello.nl> Date: Mon, 22 Jun 2009 16:35:24 +0200 Subject: perf_counter, x86: Add mmap counter read support Update the mmap control page with the needed information to use the userspace RDPMC instruction for self monitoring. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/powerpc/include/asm/perf_counter.h | 2 ++ arch/x86/include/asm/perf_counter.h | 3 +++ arch/x86/kernel/cpu/perf_counter.c | 6 ++++++ 3 files changed, 11 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/include/asm/perf_counter.h b/arch/powerpc/include/asm/perf_counter.h index 8ccd4e1..0ea0639 100644 --- a/arch/powerpc/include/asm/perf_counter.h +++ b/arch/powerpc/include/asm/perf_counter.h @@ -61,6 +61,8 @@ struct pt_regs; extern unsigned long perf_misc_flags(struct pt_regs *regs); extern unsigned long perf_instruction_pointer(struct pt_regs *regs); +#define PERF_COUNTER_INDEX_OFFSET 1 + /* * Only override the default definitions in include/linux/perf_counter.h * if we have hardware PMU support. diff --git a/arch/x86/include/asm/perf_counter.h b/arch/x86/include/asm/perf_counter.h index 5fb33e1..fa64e40 100644 --- a/arch/x86/include/asm/perf_counter.h +++ b/arch/x86/include/asm/perf_counter.h @@ -87,6 +87,9 @@ union cpuid10_edx { #ifdef CONFIG_PERF_COUNTERS extern void init_hw_perf_counters(void); extern void perf_counters_lapic_init(void); + +#define PERF_COUNTER_INDEX_OFFSET 0 + #else static inline void init_hw_perf_counters(void) { } static inline void perf_counters_lapic_init(void) { } diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c index a310d19..b83474b 100644 --- a/arch/x86/kernel/cpu/perf_counter.c +++ b/arch/x86/kernel/cpu/perf_counter.c @@ -912,6 +912,8 @@ x86_perf_counter_set_period(struct perf_counter *counter, err = checking_wrmsrl(hwc->counter_base + idx, (u64)(-left) & x86_pmu.counter_mask); + perf_counter_update_userpage(counter); + return ret; } @@ -1034,6 +1036,8 @@ try_generic: x86_perf_counter_set_period(counter, hwc, idx); x86_pmu.enable(hwc, idx); + perf_counter_update_userpage(counter); + return 0; } @@ -1126,6 +1130,8 @@ static void x86_pmu_disable(struct perf_counter *counter) x86_perf_counter_update(counter, hwc, idx); cpuc->counters[idx] = NULL; clear_bit(idx, cpuc->used_mask); + + perf_counter_update_userpage(counter); } /* -- cgit v1.1 From 5211a242d0cbdded372aee59da18f80552b0a80a Mon Sep 17 00:00:00 2001 From: Kurt Garloff <garloff@suse.de> Date: Wed, 24 Jun 2009 14:32:11 -0700 Subject: x86: Add sysctl to allow panic on IOCK NMI error This patch introduces a new sysctl: /proc/sys/kernel/panic_on_io_nmi which defaults to 0 (off). When enabled, the kernel panics when the kernel receives an NMI caused by an IO error. The IO error triggered NMI indicates a serious system condition, which could result in IO data corruption. Rather than contiuing, panicing and dumping might be a better choice, so one can figure out what's causing the IO error. This could be especially important to companies running IO intensive applications where corruption must be avoided, e.g. a bank's databases. [ SuSE has been shipping it for a while, it was done at the request of a large database vendor, for their users. ] Signed-off-by: Kurt Garloff <garloff@suse.de> Signed-off-by: Roberto Angelino <robertangelino@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> LKML-Reference: <20090624213211.GA11291@kroah.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/kernel/dumpstack.c | 1 + arch/x86/kernel/traps.c | 3 +++ 2 files changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/dumpstack.c b/arch/x86/kernel/dumpstack.c index 95ea5fa..c8405718 100644 --- a/arch/x86/kernel/dumpstack.c +++ b/arch/x86/kernel/dumpstack.c @@ -22,6 +22,7 @@ #include "dumpstack.h" int panic_on_unrecovered_nmi; +int panic_on_io_nmi; unsigned int code_bytes = 64; int kstack_depth_to_print = 3 * STACKSLOTS_PER_LINE; static int die_counter; diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c index a0f48f5..5204332 100644 --- a/arch/x86/kernel/traps.c +++ b/arch/x86/kernel/traps.c @@ -346,6 +346,9 @@ io_check_error(unsigned char reason, struct pt_regs *regs) printk(KERN_EMERG "NMI: IOCK error (debug interrupt?)\n"); show_registers(regs); + if (panic_on_io_nmi) + panic("NMI IOCK error: Not continuing"); + /* Re-enable the IOCK line, wait for a few seconds */ reason = (reason & 0xf) | 8; outb(reason, 0x61); -- cgit v1.1 From 5be6066a7f8d917db347d94f1b359b9b70dcb572 Mon Sep 17 00:00:00 2001 From: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Date: Wed, 24 Jun 2009 09:21:10 +0900 Subject: x86, mce: percpu mcheck_timer should be pinned If CONFIG_NO_HZ + CONFIG_SMP, timer added via add_timer() might be migrated on other cpu. Use add_timer_on() instead. Avoids the following failure: Maciej Rutecki wrote: > > After normal boot I try: > > > > echo 1 > /sys/devices/system/machinecheck/machinecheck0/check_interval > > > > I found this in dmesg: > > > > [ 141.704025] ------------[ cut here ]------------ > > [ 141.704039] WARNING: at arch/x86/kernel/cpu/mcheck/mce.c:1102 > > mcheck_timer+0xf5/0x100() Reported-by: Maciej Rutecki <maciej.rutecki@gmail.com> Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Tested-by: Maciej Rutecki <maciej.rutecki@gmail.com> Acked-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> --- arch/x86/kernel/cpu/mcheck/mce.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index 284d1de..af425b8 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -1117,7 +1117,7 @@ static void mcheck_timer(unsigned long data) *n = min(*n*2, (int)round_jiffies_relative(check_interval*HZ)); t->expires = jiffies + *n; - add_timer(t); + add_timer_on(t, smp_processor_id()); } static void mce_do_trigger(struct work_struct *work) @@ -1321,7 +1321,7 @@ static void mce_init_timer(void) return; setup_timer(t, mcheck_timer, smp_processor_id()); t->expires = round_jiffies(jiffies + *n); - add_timer(t); + add_timer_on(t, smp_processor_id()); } /* -- cgit v1.1 From 22f4319d6bc0155e6c0ae560729baa6c09dc09e7 Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" <rpjday@crashcourse.ca> Date: Thu, 25 Jun 2009 16:20:48 -0400 Subject: x86, setup: Fix typo "CONFIG_x86_64" in <asm/boot.h> CONFIG_X86_64 was misspelled (wrong case), which caused the x86-64 kernel to advertise itself as more relocatable than it really is. This could in theory cause boot failures once bootloaders start support the new relocation fields. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: H. Peter Anvin <hpa@zytor.com> --- arch/x86/include/asm/boot.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/include/asm/boot.h b/arch/x86/include/asm/boot.h index 418e632..6f02b9a 100644 --- a/arch/x86/include/asm/boot.h +++ b/arch/x86/include/asm/boot.h @@ -16,7 +16,7 @@ & ~(CONFIG_PHYSICAL_ALIGN - 1)) /* Minimum kernel alignment, as a power of two */ -#ifdef CONFIG_x86_64 +#ifdef CONFIG_X86_64 #define MIN_KERNEL_ALIGN_LG2 PMD_SHIFT #else #define MIN_KERNEL_ALIGN_LG2 (PAGE_SHIFT+1) -- cgit v1.1 From 658dbfeb5e7ab35d440c665d643a6285e43fddcd Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" <hpa@zytor.com> Date: Thu, 25 Jun 2009 15:16:06 -0700 Subject: x86, setup: correct include file in <asm/boot.h> <asm/boot.h> needs <asm/pgtable_types.h>, not <asm/page_types.h> in order to resolve PMD_SHIFT. Also, correct a +1 which really should be + THREAD_ORDER. This is a build error which was masked by a typoed #ifdef. Signed-off-by: H. Peter Anvin <hpa@zytor.com> --- arch/x86/include/asm/boot.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/boot.h b/arch/x86/include/asm/boot.h index 6f02b9a..7a10659 100644 --- a/arch/x86/include/asm/boot.h +++ b/arch/x86/include/asm/boot.h @@ -8,7 +8,7 @@ #ifdef __KERNEL__ -#include <asm/page_types.h> +#include <asm/pgtable_types.h> /* Physical address where kernel should be loaded. */ #define LOAD_PHYSICAL_ADDR ((CONFIG_PHYSICAL_START \ @@ -19,7 +19,7 @@ #ifdef CONFIG_X86_64 #define MIN_KERNEL_ALIGN_LG2 PMD_SHIFT #else -#define MIN_KERNEL_ALIGN_LG2 (PAGE_SHIFT+1) +#define MIN_KERNEL_ALIGN_LG2 (PAGE_SHIFT + THREAD_ORDER) #endif #define MIN_KERNEL_ALIGN (_AC(1, UL) << MIN_KERNEL_ALIGN_LG2) -- cgit v1.1 From e888d7facd1f1460a638151036d15b6cfb3ccc74 Mon Sep 17 00:00:00 2001 From: "Pallipadi, Venkatesh" <venkatesh.pallipadi@intel.com> Date: Thu, 25 Jun 2009 16:44:31 -0700 Subject: x86, delay: tsc based udelay should have rdtsc_barrier delay_tsc needs rdtsc_barrier to provide proper delay. Output from a test driver using hpet to cross check delay provided by udelay(). Before: [ 86.794363] Expected delay 5us actual 4679ns [ 87.154362] Expected delay 5us actual 698ns [ 87.514162] Expected delay 5us actual 4539ns [ 88.653716] Expected delay 5us actual 4539ns [ 94.664106] Expected delay 10us actual 9638ns [ 95.049351] Expected delay 10us actual 10126ns [ 95.416110] Expected delay 10us actual 9568ns [ 95.799216] Expected delay 10us actual 9638ns [ 103.624104] Expected delay 10us actual 9707ns [ 104.020619] Expected delay 10us actual 768ns [ 104.419951] Expected delay 10us actual 9707ns After: [ 50.983320] Expected delay 5us actual 5587ns [ 51.261807] Expected delay 5us actual 5587ns [ 51.565715] Expected delay 5us actual 5657ns [ 51.861171] Expected delay 5us actual 5587ns [ 52.164704] Expected delay 5us actual 5726ns [ 52.487457] Expected delay 5us actual 5657ns [ 52.789338] Expected delay 5us actual 5726ns [ 57.119680] Expected delay 10us actual 10755ns [ 57.893997] Expected delay 10us actual 10615ns [ 58.261287] Expected delay 10us actual 10755ns [ 58.620505] Expected delay 10us actual 10825ns [ 58.941035] Expected delay 10us actual 10755ns [ 59.320903] Expected delay 10us actual 10615ns [ 61.306311] Expected delay 10us actual 10755ns [ 61.520542] Expected delay 10us actual 10615ns Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> --- arch/x86/lib/delay.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/x86/lib/delay.c b/arch/x86/lib/delay.c index f456860..ff485d3 100644 --- a/arch/x86/lib/delay.c +++ b/arch/x86/lib/delay.c @@ -55,8 +55,10 @@ static void delay_tsc(unsigned long loops) preempt_disable(); cpu = smp_processor_id(); + rdtsc_barrier(); rdtscl(bclock); for (;;) { + rdtsc_barrier(); rdtscl(now); if ((now - bclock) >= loops) break; @@ -78,6 +80,7 @@ static void delay_tsc(unsigned long loops) if (unlikely(cpu != smp_processor_id())) { loops -= (now - bclock); cpu = smp_processor_id(); + rdtsc_barrier(); rdtscl(bclock); } } -- cgit v1.1 From 14a2ff6ed28931f796d2c2c8a440227a5d90f441 Mon Sep 17 00:00:00 2001 From: "David S. Miller" <davem@davemloft.net> Date: Thu, 25 Jun 2009 19:00:47 -0700 Subject: sparc64: Don't use alloc_bootmem() in init_IRQ() code paths. The page allocator and SLAB are available at this point now, and if we still try to use bootmem allocations here the kernel spits out warnings. Signed-off-by: David S. Miller <davem@davemloft.net> --- arch/sparc/kernel/irq_64.c | 45 +++++++++++++++++++-------------------------- 1 file changed, 19 insertions(+), 26 deletions(-) (limited to 'arch') diff --git a/arch/sparc/kernel/irq_64.c b/arch/sparc/kernel/irq_64.c index bd07505..f0ee790 100644 --- a/arch/sparc/kernel/irq_64.c +++ b/arch/sparc/kernel/irq_64.c @@ -20,7 +20,6 @@ #include <linux/delay.h> #include <linux/proc_fs.h> #include <linux/seq_file.h> -#include <linux/bootmem.h> #include <linux/irq.h> #include <asm/ptrace.h> @@ -914,25 +913,19 @@ void __cpuinit notrace sun4v_register_mondo_queues(int this_cpu) tb->nonresum_qmask); } -static void __init alloc_one_mondo(unsigned long *pa_ptr, unsigned long qmask) -{ - unsigned long size = PAGE_ALIGN(qmask + 1); - void *p = __alloc_bootmem(size, size, 0); - if (!p) { - prom_printf("SUN4V: Error, cannot allocate mondo queue.\n"); - prom_halt(); - } - - *pa_ptr = __pa(p); -} - -static void __init alloc_one_kbuf(unsigned long *pa_ptr, unsigned long qmask) +/* Each queue region must be a power of 2 multiple of 64 bytes in + * size. The base real address must be aligned to the size of the + * region. Thus, an 8KB queue must be 8KB aligned, for example. + */ +static void __init alloc_one_queue(unsigned long *pa_ptr, unsigned long qmask) { unsigned long size = PAGE_ALIGN(qmask + 1); - void *p = __alloc_bootmem(size, size, 0); + unsigned long order = get_order(size); + unsigned long p; + p = __get_free_pages(GFP_KERNEL, order); if (!p) { - prom_printf("SUN4V: Error, cannot allocate kbuf page.\n"); + prom_printf("SUN4V: Error, cannot allocate queue.\n"); prom_halt(); } @@ -942,11 +935,11 @@ static void __init alloc_one_kbuf(unsigned long *pa_ptr, unsigned long qmask) static void __init init_cpu_send_mondo_info(struct trap_per_cpu *tb) { #ifdef CONFIG_SMP - void *page; + unsigned long page; BUILD_BUG_ON((NR_CPUS * sizeof(u16)) > (PAGE_SIZE - 64)); - page = alloc_bootmem_pages(PAGE_SIZE); + page = get_zeroed_page(GFP_KERNEL); if (!page) { prom_printf("SUN4V: Error, cannot allocate cpu mondo page.\n"); prom_halt(); @@ -965,13 +958,13 @@ static void __init sun4v_init_mondo_queues(void) for_each_possible_cpu(cpu) { struct trap_per_cpu *tb = &trap_block[cpu]; - alloc_one_mondo(&tb->cpu_mondo_pa, tb->cpu_mondo_qmask); - alloc_one_mondo(&tb->dev_mondo_pa, tb->dev_mondo_qmask); - alloc_one_mondo(&tb->resum_mondo_pa, tb->resum_qmask); - alloc_one_kbuf(&tb->resum_kernel_buf_pa, tb->resum_qmask); - alloc_one_mondo(&tb->nonresum_mondo_pa, tb->nonresum_qmask); - alloc_one_kbuf(&tb->nonresum_kernel_buf_pa, - tb->nonresum_qmask); + alloc_one_queue(&tb->cpu_mondo_pa, tb->cpu_mondo_qmask); + alloc_one_queue(&tb->dev_mondo_pa, tb->dev_mondo_qmask); + alloc_one_queue(&tb->resum_mondo_pa, tb->resum_qmask); + alloc_one_queue(&tb->resum_kernel_buf_pa, tb->resum_qmask); + alloc_one_queue(&tb->nonresum_mondo_pa, tb->nonresum_qmask); + alloc_one_queue(&tb->nonresum_kernel_buf_pa, + tb->nonresum_qmask); } } @@ -999,7 +992,7 @@ void __init init_IRQ(void) kill_prom_timer(); size = sizeof(struct ino_bucket) * NUM_IVECS; - ivector_table = alloc_bootmem(size); + ivector_table = kzalloc(size, GFP_KERNEL); if (!ivector_table) { prom_printf("Fatal error, cannot allocate ivector_table\n"); prom_halt(); -- cgit v1.1 From 413ee282a510afb2f18975a189501f39d279a906 Mon Sep 17 00:00:00 2001 From: Julian Calaby <julian.calaby@gmail.com> Date: Sun, 21 Jun 2009 16:44:13 +0000 Subject: sparc64: Fix build warnings in piggyback_64.c This patch fixes the following build warnings: arch/sparc/boot/piggyback_64.c: In function 'main': arch/sparc/boot/piggyback_64.c:44: warning: 'end' may be used uninitialized in this function arch/sparc/boot/piggyback_64.c:44: warning: 'start' may be used uninitialized in this function Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> --- arch/sparc/boot/piggyback_64.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/sparc/boot/piggyback_64.c b/arch/sparc/boot/piggyback_64.c index de364bf..c63fd1b 100644 --- a/arch/sparc/boot/piggyback_64.c +++ b/arch/sparc/boot/piggyback_64.c @@ -46,6 +46,7 @@ int main(int argc,char **argv) struct stat s; int image, tail; + start = end = 0; if (stat (argv[3], &s) < 0) die (argv[3]); map = fopen (argv[2], "r"); if (!map) die(argv[2]); -- cgit v1.1 From 22b096a8907e5184f25fafd1b73f0b3633d52495 Mon Sep 17 00:00:00 2001 From: Robert Reif <reif@earthlink.net> Date: Sun, 21 Jun 2009 16:45:44 +0000 Subject: sparc32: Fix obvious build issues for tftpboot.img build. Signed-off-by: Robert Reif <reif@earthlink.net> Signed-off-by: David S. Miller <davem@davemloft.net> --- arch/sparc/boot/Makefile | 2 +- arch/sparc/boot/piggyback_32.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/sparc/boot/Makefile b/arch/sparc/boot/Makefile index 96041a8..5e2caeb 100644 --- a/arch/sparc/boot/Makefile +++ b/arch/sparc/boot/Makefile @@ -58,7 +58,7 @@ $(obj)/image: $(obj)/btfix.o FORCE $(obj)/zImage: $(obj)/image $(call if_changed,strip) -$(obj)/tftpboot.img: $(obj)/piggyback $(obj)/System.map $(obj)/image FORCE +$(obj)/tftpboot.img: $(obj)/piggyback_32 $(obj)/System.map $(obj)/image FORCE $(call if_changed,elftoaout) $(call if_changed,piggy) diff --git a/arch/sparc/boot/piggyback_32.c b/arch/sparc/boot/piggyback_32.c index c9f500c..3f0f933 100644 --- a/arch/sparc/boot/piggyback_32.c +++ b/arch/sparc/boot/piggyback_32.c @@ -70,7 +70,7 @@ void die(char *str) int main(int argc,char **argv) { static char aout_magic[] = { 0x01, 0x03, 0x01, 0x07 }; - unsigned char buffer[1024], *q, *r; + char buffer[1024], *q, *r; unsigned int i, j, k, start, end, offset; FILE *map; struct stat s; -- cgit v1.1 From 52da82cfb569b44e26e15395a6727277758580fe Mon Sep 17 00:00:00 2001 From: Sam Ravnborg <sam@ravnborg.org> Date: Sun, 21 Jun 2009 16:46:10 +0000 Subject: sparc: fix tftpboot.img build Kjetil Oftedal mentioned that piggyback_32 was failing when building a sparc image. I tracked this down to the fact that the kernel no longer provided an absolute symbol named "end". Commit 86ed40bd6fe511d26bb8f3fa65a84cb65c235366 ("sparc: unify sections.h") renamed end to _end but failed to update piggyback_32. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Kjetil Oftedal <oftedal@gmail.com> Cc: Robert Reif <reif@earthlink.net> Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> --- arch/sparc/boot/piggyback_32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sparc/boot/piggyback_32.c b/arch/sparc/boot/piggyback_32.c index 3f0f933..e8dc9ad 100644 --- a/arch/sparc/boot/piggyback_32.c +++ b/arch/sparc/boot/piggyback_32.c @@ -84,7 +84,7 @@ int main(int argc,char **argv) while (fgets (buffer, 1024, map)) { if (!strcmp (buffer + 8, " T start\n") || !strcmp (buffer + 16, " T start\n")) start = strtoul (buffer, NULL, 16); - else if (!strcmp (buffer + 8, " A end\n") || !strcmp (buffer + 16, " A end\n")) + else if (!strcmp (buffer + 8, " A _end\n") || !strcmp (buffer + 16, " A _end\n")) end = strtoul (buffer, NULL, 16); } fclose (map); -- cgit v1.1 From 3e05c5e2ce40066582dc34aa8335baa328815a09 Mon Sep 17 00:00:00 2001 From: Julian Calaby <julian.calaby@gmail.com> Date: Sun, 21 Jun 2009 16:45:01 +0000 Subject: sparc32: Fix tftpboot.img Makefile Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> --- arch/sparc/boot/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/sparc/boot/Makefile b/arch/sparc/boot/Makefile index 5e2caeb..500a2f8 100644 --- a/arch/sparc/boot/Makefile +++ b/arch/sparc/boot/Makefile @@ -15,7 +15,7 @@ quiet_cmd_elftoaout = ELFTOAOUT $@ ifeq ($(CONFIG_SPARC32),y) quiet_cmd_piggy = PIGGY $@ - cmd_piggy = $(obj)/piggyback_32 $@ $(obj)/System.map $(ROOT_IMG) + cmd_piggy = $(obj)/piggyback_32 $@ System.map $(ROOT_IMG) quiet_cmd_btfix = BTFIX $@ cmd_btfix = $(OBJDUMP) -x vmlinux | $(obj)/btfixupprep > $@ quiet_cmd_sysmap = SYSMAP $(obj)/System.map @@ -58,7 +58,7 @@ $(obj)/image: $(obj)/btfix.o FORCE $(obj)/zImage: $(obj)/image $(call if_changed,strip) -$(obj)/tftpboot.img: $(obj)/piggyback_32 $(obj)/System.map $(obj)/image FORCE +$(obj)/tftpboot.img: $(obj)/piggyback_32 System.map $(ROOT_IMG) FORCE $(call if_changed,elftoaout) $(call if_changed,piggy) -- cgit v1.1 From 8944146daa2c38dd85bc489d1b84fb9abc108837 Mon Sep 17 00:00:00 2001 From: Julian Calaby <julian.calaby@gmail.com> Date: Tue, 23 Jun 2009 01:45:46 +0000 Subject: sparc32: Fix makefile not generating required files The tftpboot build was failing with missing file errors. It turns out that $(obj)/image wasn't being generated which was causing the a.out conversion to be skipped and hence piggyback to be called with nonexistent files. Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> --- arch/sparc/boot/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/sparc/boot/Makefile b/arch/sparc/boot/Makefile index 500a2f8..1ff0fd9 100644 --- a/arch/sparc/boot/Makefile +++ b/arch/sparc/boot/Makefile @@ -58,7 +58,7 @@ $(obj)/image: $(obj)/btfix.o FORCE $(obj)/zImage: $(obj)/image $(call if_changed,strip) -$(obj)/tftpboot.img: $(obj)/piggyback_32 System.map $(ROOT_IMG) FORCE +$(obj)/tftpboot.img: $(obj)/image $(obj)/piggyback_32 System.map $(ROOT_IMG) FORCE $(call if_changed,elftoaout) $(call if_changed,piggy) @@ -79,7 +79,7 @@ $(obj)/image: vmlinux FORCE $(call if_changed,strip) @echo ' kernel: $@ is ready' -$(obj)/tftpboot.img: vmlinux $(obj)/piggyback_64 System.map $(ROOT_IMG) FORCE +$(obj)/tftpboot.img: $(obj)/image $(obj)/piggyback_64 System.map $(ROOT_IMG) FORCE $(call if_changed,elftoaout) $(call if_changed,piggy) @echo ' kernel: $@ is ready' -- cgit v1.1 From 6f0b1c6094b3e8eeeb13f8f16c1b2ef452a6f519 Mon Sep 17 00:00:00 2001 From: Michael Ellerman <michael@ellerman.id.au> Date: Mon, 22 Jun 2009 23:13:48 +0000 Subject: powerpc: Swiotlb breaks pseries Turning on SWIOTLB selects or enables PPC_NEED_DMA_SYNC_OPS, which means we get the non empty versions of dma_sync_* in asm/dma-mapping.h On my pseries machine the dma_ops have no such routines and we die with a null pointer - this patch gets it booting, is there a more elegant way to do it? Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> --- arch/powerpc/include/asm/dma-mapping.h | 24 ++++++++++++++++++------ 1 file changed, 18 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h index 3d9e887..b44aaab 100644 --- a/arch/powerpc/include/asm/dma-mapping.h +++ b/arch/powerpc/include/asm/dma-mapping.h @@ -309,7 +309,9 @@ static inline void dma_sync_single_for_cpu(struct device *dev, struct dma_mapping_ops *dma_ops = get_dma_ops(dev); BUG_ON(!dma_ops); - dma_ops->sync_single_range_for_cpu(dev, dma_handle, 0, + + if (dma_ops->sync_single_range_for_cpu) + dma_ops->sync_single_range_for_cpu(dev, dma_handle, 0, size, direction); } @@ -320,7 +322,9 @@ static inline void dma_sync_single_for_device(struct device *dev, struct dma_mapping_ops *dma_ops = get_dma_ops(dev); BUG_ON(!dma_ops); - dma_ops->sync_single_range_for_device(dev, dma_handle, + + if (dma_ops->sync_single_range_for_device) + dma_ops->sync_single_range_for_device(dev, dma_handle, 0, size, direction); } @@ -331,7 +335,9 @@ static inline void dma_sync_sg_for_cpu(struct device *dev, struct dma_mapping_ops *dma_ops = get_dma_ops(dev); BUG_ON(!dma_ops); - dma_ops->sync_sg_for_cpu(dev, sgl, nents, direction); + + if (dma_ops->sync_sg_for_cpu) + dma_ops->sync_sg_for_cpu(dev, sgl, nents, direction); } static inline void dma_sync_sg_for_device(struct device *dev, @@ -341,7 +347,9 @@ static inline void dma_sync_sg_for_device(struct device *dev, struct dma_mapping_ops *dma_ops = get_dma_ops(dev); BUG_ON(!dma_ops); - dma_ops->sync_sg_for_device(dev, sgl, nents, direction); + + if (dma_ops->sync_sg_for_device) + dma_ops->sync_sg_for_device(dev, sgl, nents, direction); } static inline void dma_sync_single_range_for_cpu(struct device *dev, @@ -351,7 +359,9 @@ static inline void dma_sync_single_range_for_cpu(struct device *dev, struct dma_mapping_ops *dma_ops = get_dma_ops(dev); BUG_ON(!dma_ops); - dma_ops->sync_single_range_for_cpu(dev, dma_handle, + + if (dma_ops->sync_single_range_for_cpu) + dma_ops->sync_single_range_for_cpu(dev, dma_handle, offset, size, direction); } @@ -362,7 +372,9 @@ static inline void dma_sync_single_range_for_device(struct device *dev, struct dma_mapping_ops *dma_ops = get_dma_ops(dev); BUG_ON(!dma_ops); - dma_ops->sync_single_range_for_device(dev, dma_handle, offset, + + if (dma_ops->sync_single_range_for_device) + dma_ops->sync_single_range_for_device(dev, dma_handle, offset, size, direction); } #else /* CONFIG_PPC_NEED_DMA_SYNC_OPS */ -- cgit v1.1 From 5a2642f620eb6e40792822fa0eafe23046fbb55e Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt <benh@kernel.crashing.org> Date: Mon, 22 Jun 2009 16:47:59 +0000 Subject: powerpc/mpic: Fix mapping of "DCR" based MPIC variants Commit 31207dab7d2e63795eb15823947bd2f7025b08e2 "Fix incorrect allocation of interrupt rev-map" introduced a regression crashing on boot on machines using a "DCR" based MPIC, such as the Cell blades. The reason is that the irq host data structure is initialized much later as a result of that patch, causing our calls to mpic_map() do be done before we have a host setup. Unfortunately, this breaks _mpic_map_dcr() which uses the mpic->irqhost to get to the device node. This fixes it by, instead, passing the device node explicitely to mpic_map(). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Akira Tsukamoto <akirat@rd.scei.sony.co.jp> --- arch/powerpc/sysdev/mpic.c | 29 ++++++++++++++++------------- 1 file changed, 16 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 9c3af50..32a2e95 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -279,28 +279,29 @@ static void _mpic_map_mmio(struct mpic *mpic, phys_addr_t phys_addr, } #ifdef CONFIG_PPC_DCR -static void _mpic_map_dcr(struct mpic *mpic, struct mpic_reg_bank *rb, +static void _mpic_map_dcr(struct mpic *mpic, struct device_node *node, + struct mpic_reg_bank *rb, unsigned int offset, unsigned int size) { const u32 *dbasep; - dbasep = of_get_property(mpic->irqhost->of_node, "dcr-reg", NULL); + dbasep = of_get_property(node, "dcr-reg", NULL); - rb->dhost = dcr_map(mpic->irqhost->of_node, *dbasep + offset, size); + rb->dhost = dcr_map(node, *dbasep + offset, size); BUG_ON(!DCR_MAP_OK(rb->dhost)); } -static inline void mpic_map(struct mpic *mpic, phys_addr_t phys_addr, - struct mpic_reg_bank *rb, unsigned int offset, - unsigned int size) +static inline void mpic_map(struct mpic *mpic, struct device_node *node, + phys_addr_t phys_addr, struct mpic_reg_bank *rb, + unsigned int offset, unsigned int size) { if (mpic->flags & MPIC_USES_DCR) - _mpic_map_dcr(mpic, rb, offset, size); + _mpic_map_dcr(mpic, node, rb, offset, size); else _mpic_map_mmio(mpic, phys_addr, rb, offset, size); } #else /* CONFIG_PPC_DCR */ -#define mpic_map(m,p,b,o,s) _mpic_map_mmio(m,p,b,o,s) +#define mpic_map(m,n,p,b,o,s) _mpic_map_mmio(m,p,b,o,s) #endif /* !CONFIG_PPC_DCR */ @@ -1152,8 +1153,8 @@ struct mpic * __init mpic_alloc(struct device_node *node, } /* Map the global registers */ - mpic_map(mpic, paddr, &mpic->gregs, MPIC_INFO(GREG_BASE), 0x1000); - mpic_map(mpic, paddr, &mpic->tmregs, MPIC_INFO(TIMER_BASE), 0x1000); + mpic_map(mpic, node, paddr, &mpic->gregs, MPIC_INFO(GREG_BASE), 0x1000); + mpic_map(mpic, node, paddr, &mpic->tmregs, MPIC_INFO(TIMER_BASE), 0x1000); /* Reset */ if (flags & MPIC_WANTS_RESET) { @@ -1194,7 +1195,7 @@ struct mpic * __init mpic_alloc(struct device_node *node, /* Map the per-CPU registers */ for (i = 0; i < mpic->num_cpus; i++) { - mpic_map(mpic, paddr, &mpic->cpuregs[i], + mpic_map(mpic, node, paddr, &mpic->cpuregs[i], MPIC_INFO(CPU_BASE) + i * MPIC_INFO(CPU_STRIDE), 0x1000); } @@ -1202,7 +1203,7 @@ struct mpic * __init mpic_alloc(struct device_node *node, /* Initialize main ISU if none provided */ if (mpic->isu_size == 0) { mpic->isu_size = mpic->num_sources; - mpic_map(mpic, paddr, &mpic->isus[0], + mpic_map(mpic, node, paddr, &mpic->isus[0], MPIC_INFO(IRQ_BASE), MPIC_INFO(IRQ_STRIDE) * mpic->isu_size); } mpic->isu_shift = 1 + __ilog2(mpic->isu_size - 1); @@ -1256,8 +1257,10 @@ void __init mpic_assign_isu(struct mpic *mpic, unsigned int isu_num, BUG_ON(isu_num >= MPIC_MAX_ISU); - mpic_map(mpic, paddr, &mpic->isus[isu_num], 0, + mpic_map(mpic, mpic->irqhost->of_node, + paddr, &mpic->isus[isu_num], 0, MPIC_INFO(IRQ_STRIDE) * mpic->isu_size); + if ((isu_first + mpic->isu_size) > mpic->num_sources) mpic->num_sources = isu_first + mpic->isu_size; } -- cgit v1.1 From b810c6ec5c659c80b3641580b112db877a0f1f45 Mon Sep 17 00:00:00 2001 From: Jon Smirl <jonsmirl@gmail.com> Date: Sun, 21 Jun 2009 15:28:00 +0000 Subject: powerpc: Have git ignore generated files from dtc compile Have git ignore generated files from dtc compile Signed-off-by: Jon Smirl <jonsmirl@gmail.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> --- arch/powerpc/boot/.gitignore | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/boot/.gitignore b/arch/powerpc/boot/.gitignore index 2f50acd..3d80c3e 100644 --- a/arch/powerpc/boot/.gitignore +++ b/arch/powerpc/boot/.gitignore @@ -36,3 +36,13 @@ zImage.pseries zconf.h zlib.h zutil.h +fdt.c +fdt.h +fdt_ro.c +fdt_rw.c +fdt_strerror.c +fdt_sw.c +fdt_wip.c +libfdt.h +libfdt_internal.h + -- cgit v1.1 From 3984114f056203d833251af85501721f7b00fd18 Mon Sep 17 00:00:00 2001 From: Sean MacLennan <smaclennan@pikatech.com> Date: Fri, 19 Jun 2009 19:43:59 +0000 Subject: powerpc/warp: Platform fix for i2c change A change to the i2c subsystem breaks the warp platform code. The patch is cleaner anyway, the old way was a bit crufty. For those with keen eyes, the gratuitous change in the string from PIKA to Warp is just so the logs look a bit nicer. The following two lines tend to be printed one after another. Warp POST OK Warp DTM thread running. Yeah, this will be the third patch to warp.c submitted in this release.... Cheers, Sean The i2c_client struct changed, breaking the code that looked for the ad7414 chip. Use the new of_find_i2c_device_by_node function added in 2.6.29. Signed-off-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> --- arch/powerpc/platforms/44x/warp.c | 44 +++++++++++++-------------------------- 1 file changed, 14 insertions(+), 30 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/44x/warp.c b/arch/powerpc/platforms/44x/warp.c index 42e09a9..0362c88 100644 --- a/arch/powerpc/platforms/44x/warp.c +++ b/arch/powerpc/platforms/44x/warp.c @@ -16,6 +16,7 @@ #include <linux/interrupt.h> #include <linux/delay.h> #include <linux/of_gpio.h> +#include <linux/of_i2c.h> #include <asm/machdep.h> #include <asm/prom.h> @@ -65,7 +66,6 @@ define_machine(warp) { static u32 post_info; -/* I am not sure this is the best place for this... */ static int __init warp_post_info(void) { struct device_node *np; @@ -194,9 +194,9 @@ static int pika_setup_leds(void) return 0; } -static void pika_setup_critical_temp(struct i2c_client *client) +static void pika_setup_critical_temp(struct device_node *np, + struct i2c_client *client) { - struct device_node *np; int irq, rc; /* Do this before enabling critical temp interrupt since we @@ -208,14 +208,7 @@ static void pika_setup_critical_temp(struct i2c_client *client) i2c_smbus_write_byte_data(client, 2, 65); /* Thigh */ i2c_smbus_write_byte_data(client, 3, 0); /* Tlow */ - np = of_find_compatible_node(NULL, NULL, "adi,ad7414"); - if (np == NULL) { - printk(KERN_ERR __FILE__ ": Unable to find ad7414\n"); - return; - } - irq = irq_of_parse_and_map(np, 0); - of_node_put(np); if (irq == NO_IRQ) { printk(KERN_ERR __FILE__ ": Unable to get ad7414 irq\n"); return; @@ -244,32 +237,24 @@ static inline void pika_dtm_check_fan(void __iomem *fpga) static int pika_dtm_thread(void __iomem *fpga) { - struct i2c_adapter *adap; + struct device_node *np; struct i2c_client *client; - /* We loop in case either driver was compiled as a module and - * has not been insmoded yet. - */ - while (!(adap = i2c_get_adapter(0))) { - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(HZ); - } - - while (1) { - list_for_each_entry(client, &adap->clients, list) - if (client->addr == 0x4a) - goto found_it; + np = of_find_compatible_node(NULL, NULL, "adi,ad7414"); + if (np == NULL) + return -ENOENT; - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(HZ); + client = of_find_i2c_device_by_node(np); + if (client == NULL) { + of_node_put(np); + return -ENOENT; } -found_it: - pika_setup_critical_temp(client); + pika_setup_critical_temp(np, client); - i2c_put_adapter(adap); + of_node_put(np); - printk(KERN_INFO "PIKA DTM thread running.\n"); + printk(KERN_INFO "Warp DTM thread running.\n"); while (!kthread_should_stop()) { int val; @@ -291,7 +276,6 @@ found_it: return 0; } - static int __init pika_dtm_start(void) { struct task_struct *dtm_thread; -- cgit v1.1 From 6bb2ae535f2eee0334802724a542701bd969d055 Mon Sep 17 00:00:00 2001 From: Gerhard Pircher <gerhard_pircher@gmx.net> Date: Fri, 19 Jun 2009 11:42:36 +0000 Subject: powerpc/amigaone: Limit ISA I/O range to 4k in the device tree The kernel reserves the I/O address space from 0x0 to 0xfff for legacy ISA devices. Change the ranges property for the PCI2ISA bridge to match the kernels behavior, even if the ranges property isn't used for now. Signed-off-by: Gerhard Pircher <gerhard_pircher@gmx.net> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> --- arch/powerpc/boot/dts/amigaone.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/boot/dts/amigaone.dts b/arch/powerpc/boot/dts/amigaone.dts index 26549fc..49ac36b 100644 --- a/arch/powerpc/boot/dts/amigaone.dts +++ b/arch/powerpc/boot/dts/amigaone.dts @@ -70,8 +70,8 @@ devsel-speed = <0x00000001>; min-grant = <0>; max-latency = <0>; - /* First 64k for I/O at 0x0 on PCI mapped to 0x0 on ISA. */ - ranges = <0x00000001 0 0x01000000 0 0x00000000 0x00010000>; + /* First 4k for I/O at 0x0 on PCI mapped to 0x0 on ISA. */ + ranges = <0x00000001 0 0x01000000 0 0x00000000 0x00001000>; interrupt-parent = <&i8259>; #interrupt-cells = <2>; #address-cells = <2>; -- cgit v1.1 From 7ccbe504b5ee766d33211a507189a06f3079b29b Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt <benh@kernel.crashing.org> Date: Thu, 18 Jun 2009 23:30:07 +0000 Subject: powerpc/pmac: Fix issues with PowerMac "PowerSurge" SMP The old PowerSurge SMP (ie, dual or quad 604 machines) code has numerous issues in modern world. One is cpu_possible_map is set too late (the device-tree is bogus) so we fail to allocate the interrupt stacks and crash. Another problem is the fact the timebase is frozen by the bringup of the second CPU so the delays in the generic code will hang, we need to move some of the calling procedure to inside the powermac code. This makes it boot again for me Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> --- arch/powerpc/kernel/smp.c | 3 +- arch/powerpc/platforms/powermac/setup.c | 41 ++------ arch/powerpc/platforms/powermac/smp.c | 166 ++++++++++++++++++++------------ 3 files changed, 112 insertions(+), 98 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index 65484b2..0b47de0 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -68,7 +68,8 @@ EXPORT_PER_CPU_SYMBOL(cpu_core_map); /* SMP operations for this machine */ struct smp_ops_t *smp_ops; -static volatile unsigned int cpu_callin_map[NR_CPUS]; +/* Can't be static due to PowerMac hackery */ +volatile unsigned int cpu_callin_map[NR_CPUS]; int smt_enabled_at_boot = 1; diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c index 86f69a4..c205226 100644 --- a/arch/powerpc/platforms/powermac/setup.c +++ b/arch/powerpc/platforms/powermac/setup.c @@ -103,11 +103,6 @@ unsigned long smu_cmdbuf_abs; EXPORT_SYMBOL(smu_cmdbuf_abs); #endif -#ifdef CONFIG_SMP -extern struct smp_ops_t psurge_smp_ops; -extern struct smp_ops_t core99_smp_ops; -#endif /* CONFIG_SMP */ - static void pmac_show_cpuinfo(struct seq_file *m) { struct device_node *np; @@ -341,34 +336,6 @@ static void __init pmac_setup_arch(void) ROOT_DEV = DEFAULT_ROOT_DEVICE; #endif -#ifdef CONFIG_SMP - /* Check for Core99 */ - ic = of_find_node_by_name(NULL, "uni-n"); - if (!ic) - ic = of_find_node_by_name(NULL, "u3"); - if (!ic) - ic = of_find_node_by_name(NULL, "u4"); - if (ic) { - of_node_put(ic); - smp_ops = &core99_smp_ops; - } -#ifdef CONFIG_PPC32 - else { - /* - * We have to set bits in cpu_possible_map here since the - * secondary CPU(s) aren't in the device tree, and - * setup_per_cpu_areas only allocates per-cpu data for - * CPUs in the cpu_possible_map. - */ - int cpu; - - for (cpu = 1; cpu < 4 && cpu < NR_CPUS; ++cpu) - cpu_set(cpu, cpu_possible_map); - smp_ops = &psurge_smp_ops; - } -#endif -#endif /* CONFIG_SMP */ - #ifdef CONFIG_ADB if (strstr(cmd_line, "adb_sync")) { extern int __adb_probe_sync; @@ -512,6 +479,14 @@ static void __init pmac_init_early(void) #ifdef CONFIG_PPC64 iommu_init_early_dart(); #endif + + /* SMP Init has to be done early as we need to patch up + * cpu_possible_map before interrupt stacks are allocated + * or kaboom... + */ +#ifdef CONFIG_SMP + pmac_setup_smp(); +#endif } static int __init pmac_declare_of_platform_devices(void) diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c index cf1dbe7..6d4da7b 100644 --- a/arch/powerpc/platforms/powermac/smp.c +++ b/arch/powerpc/platforms/powermac/smp.c @@ -64,10 +64,11 @@ extern void __secondary_start_pmac_0(void); extern int pmac_pfunc_base_install(void); -#ifdef CONFIG_PPC32 +static void (*pmac_tb_freeze)(int freeze); +static u64 timebase; +static int tb_req; -/* Sync flag for HW tb sync */ -static volatile int sec_tb_reset = 0; +#ifdef CONFIG_PPC32 /* * Powersurge (old powermac SMP) support. @@ -294,6 +295,9 @@ static int __init smp_psurge_probe(void) psurge_quad_init(); /* All released cards using this HW design have 4 CPUs */ ncpus = 4; + /* No sure how timebase sync works on those, let's use SW */ + smp_ops->give_timebase = smp_generic_give_timebase; + smp_ops->take_timebase = smp_generic_take_timebase; } else { iounmap(quad_base); if ((in_8(hhead_base + HHEAD_CONFIG) & 0x02) == 0) { @@ -308,18 +312,15 @@ static int __init smp_psurge_probe(void) psurge_start = ioremap(PSURGE_START, 4); psurge_pri_intr = ioremap(PSURGE_PRI_INTR, 4); - /* - * This is necessary because OF doesn't know about the + /* This is necessary because OF doesn't know about the * secondary cpu(s), and thus there aren't nodes in the * device tree for them, and smp_setup_cpu_maps hasn't - * set their bits in cpu_possible_map and cpu_present_map. + * set their bits in cpu_present_map. */ if (ncpus > NR_CPUS) ncpus = NR_CPUS; - for (i = 1; i < ncpus ; ++i) { + for (i = 1; i < ncpus ; ++i) cpu_set(i, cpu_present_map); - set_hard_smp_processor_id(i, i); - } if (ppc_md.progress) ppc_md.progress("smp_psurge_probe - done", 0x352); @@ -329,8 +330,14 @@ static int __init smp_psurge_probe(void) static void __init smp_psurge_kick_cpu(int nr) { unsigned long start = __pa(__secondary_start_pmac_0) + nr * 8; - unsigned long a; - int i; + unsigned long a, flags; + int i, j; + + /* Defining this here is evil ... but I prefer hiding that + * crap to avoid giving people ideas that they can do the + * same. + */ + extern volatile unsigned int cpu_callin_map[NR_CPUS]; /* may need to flush here if secondary bats aren't setup */ for (a = KERNELBASE; a < KERNELBASE + 0x800000; a += 32) @@ -339,47 +346,52 @@ static void __init smp_psurge_kick_cpu(int nr) if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu", 0x353); + /* This is going to freeze the timeebase, we disable interrupts */ + local_irq_save(flags); + out_be32(psurge_start, start); mb(); psurge_set_ipi(nr); + /* * We can't use udelay here because the timebase is now frozen. */ for (i = 0; i < 2000; ++i) - barrier(); + asm volatile("nop" : : : "memory"); psurge_clr_ipi(nr); - if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu - done", 0x354); -} - -/* - * With the dual-cpu powersurge board, the decrementers and timebases - * of both cpus are frozen after the secondary cpu is started up, - * until we give the secondary cpu another interrupt. This routine - * uses this to get the timebases synchronized. - * -- paulus. - */ -static void __init psurge_dual_sync_tb(int cpu_nr) -{ - int t; - - set_dec(tb_ticks_per_jiffy); - /* XXX fixme */ - set_tb(0, 0); - - if (cpu_nr > 0) { + /* + * Also, because the timebase is frozen, we must not return to the + * caller which will try to do udelay's etc... Instead, we wait -here- + * for the CPU to callin. + */ + for (i = 0; i < 100000 && !cpu_callin_map[nr]; ++i) { + for (j = 1; j < 10000; j++) + asm volatile("nop" : : : "memory"); + asm volatile("sync" : : : "memory"); + } + if (!cpu_callin_map[nr]) + goto stuck; + + /* And we do the TB sync here too for standard dual CPU cards */ + if (psurge_type == PSURGE_DUAL) { + while(!tb_req) + barrier(); + tb_req = 0; + mb(); + timebase = get_tb(); + mb(); + while (timebase) + barrier(); mb(); - sec_tb_reset = 1; - return; } + stuck: + /* now interrupt the secondary, restarting both TBs */ + if (psurge_type == PSURGE_DUAL) + psurge_set_ipi(1); - /* wait for the secondary to have reset its TB before proceeding */ - for (t = 10000000; t > 0 && !sec_tb_reset; --t) - ; - - /* now interrupt the secondary, starting both TBs */ - psurge_set_ipi(1); + if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu - done", 0x354); } static struct irqaction psurge_irqaction = { @@ -390,36 +402,35 @@ static struct irqaction psurge_irqaction = { static void __init smp_psurge_setup_cpu(int cpu_nr) { + if (cpu_nr != 0) + return; - if (cpu_nr == 0) { - /* If we failed to start the second CPU, we should still - * send it an IPI to start the timebase & DEC or we might - * have them stuck. - */ - if (num_online_cpus() < 2) { - if (psurge_type == PSURGE_DUAL) - psurge_set_ipi(1); - return; - } - /* reset the entry point so if we get another intr we won't - * try to startup again */ - out_be32(psurge_start, 0x100); - if (setup_irq(30, &psurge_irqaction)) - printk(KERN_ERR "Couldn't get primary IPI interrupt"); - } - - if (psurge_type == PSURGE_DUAL) - psurge_dual_sync_tb(cpu_nr); + /* reset the entry point so if we get another intr we won't + * try to startup again */ + out_be32(psurge_start, 0x100); + if (setup_irq(30, &psurge_irqaction)) + printk(KERN_ERR "Couldn't get primary IPI interrupt"); } void __init smp_psurge_take_timebase(void) { - /* Dummy implementation */ + if (psurge_type != PSURGE_DUAL) + return; + + tb_req = 1; + mb(); + while (!timebase) + barrier(); + mb(); + set_tb(timebase >> 32, timebase & 0xffffffff); + timebase = 0; + mb(); + set_dec(tb_ticks_per_jiffy/2); } void __init smp_psurge_give_timebase(void) { - /* Dummy implementation */ + /* Nothing to do here */ } /* PowerSurge-style Macs */ @@ -437,9 +448,6 @@ struct smp_ops_t psurge_smp_ops = { * Core 99 and later support */ -static void (*pmac_tb_freeze)(int freeze); -static u64 timebase; -static int tb_req; static void smp_core99_give_timebase(void) { @@ -478,7 +486,6 @@ static void __devinit smp_core99_take_timebase(void) set_tb(timebase >> 32, timebase & 0xffffffff); timebase = 0; mb(); - set_dec(tb_ticks_per_jiffy/2); local_irq_restore(flags); } @@ -920,3 +927,34 @@ struct smp_ops_t core99_smp_ops = { # endif #endif }; + +void __init pmac_setup_smp(void) +{ + struct device_node *np; + + /* Check for Core99 */ + np = of_find_node_by_name(NULL, "uni-n"); + if (!np) + np = of_find_node_by_name(NULL, "u3"); + if (!np) + np = of_find_node_by_name(NULL, "u4"); + if (np) { + of_node_put(np); + smp_ops = &core99_smp_ops; + } +#ifdef CONFIG_PPC32 + else { + /* We have to set bits in cpu_possible_map here since the + * secondary CPU(s) aren't in the device tree. Various + * things won't be initialized for CPUs not in the possible + * map, so we really need to fix it up here. + */ + int cpu; + + for (cpu = 1; cpu < 4 && cpu < NR_CPUS; ++cpu) + cpu_set(cpu, cpu_possible_map); + smp_ops = &psurge_smp_ops; + } +#endif /* CONFIG_PPC32 */ +} + -- cgit v1.1 From a2367194183d6ab6b05e5d7d9b40db6ba48afc06 Mon Sep 17 00:00:00 2001 From: Kumar Gala <galak@kernel.crashing.org> Date: Thu, 18 Jun 2009 22:29:55 +0000 Subject: powerpc: Fix output from show_regs For some reason we've had an explicit KERN_INFO for GPR dumps. With recent changes we get output like: <6>GPR00: 00000000 ef855eb0 ef858000 00000001 000000d0 f1000000 ffbc8000 ffffffff The KERN_INFO is causing the <6>. Don't see any reason to keep it around. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> --- arch/powerpc/kernel/process.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 3e7135bb..892a9f2 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -528,7 +528,7 @@ void show_regs(struct pt_regs * regs) for (i = 0; i < 32; i++) { if ((i % REGS_PER_LINE) == 0) - printk("\n" KERN_INFO "GPR%02d: ", i); + printk("\nGPR%02d: ", i); printk(REG " ", regs->gpr[i]); if (i == LAST_VOLATILE && !FULL_REGS(regs)) break; -- cgit v1.1 From 85355bb272db31a3f2dd99d547eef794805e1319 Mon Sep 17 00:00:00 2001 From: Kumar Gala <galak@kernel.crashing.org> Date: Thu, 18 Jun 2009 22:01:20 +0000 Subject: powerpc: Fix mpic alloc warning Since we can use kmalloc earlier we are getting the following since the mpic_alloc() code calls alloc_bootmem(). Move to using kzalloc() to remove the warning. ------------[ cut here ]------------ Badness at c0583248 [verbose debug info unavailable] NIP: c0583248 LR: c0583210 CTR: 00000004 REGS: c0741de0 TRAP: 0700 Not tainted (2.6.30-06736-g12a31df) MSR: 00021000 <ME,CE> CR: 22024024 XER: 00000000 TASK = c070d3b8[0] 'swapper' THREAD: c0740000 CPU: 0 <6>GPR00: 00000001 c0741e90 c070d3b8 00000001 00000210 00000020 3fffffff 00000000 <6>GPR08: 00000000 c0c85700 c04f8c40 0000002d 22044022 1004a388 7ffd9400 00000000 <6>GPR16: 00000000 7ffcd100 7ffcd100 7ffcd100 c04f8c40 00000000 c059f62c c075a0c0 <6>GPR24: c059f648 00000000 0000000f 00000210 00000020 00000000 3fffffff 00000210 NIP [c0583248] alloc_arch_preferred_bootmem+0x50/0x80 LR [c0583210] alloc_arch_preferred_bootmem+0x18/0x80 Call Trace: [c0741e90] [c07343b0] devtree_lock+0x0/0x24 (unreliable) [c0741ea0] [c0583b14] ___alloc_bootmem_nopanic+0x54/0x108 [c0741ee0] [c0583e18] ___alloc_bootmem+0x18/0x50 [c0741ef0] [c057b9cc] mpic_alloc+0x48/0x710 [c0741f40] [c057ecf4] mpc85xx_ds_pic_init+0x190/0x1b8 [c0741f90] [c057633c] init_IRQ+0x24/0x34 [c0741fa0] [c05738b8] start_kernel+0x260/0x3dc [c0741ff0] [c00003c8] skpinv+0x2e0/0x31c Instruction dump: 409e001c 7c030378 80010014 83e1000c 38210010 7c0803a6 4e800020 3d20c0c8 39295700 80090004 7c000034 5400d97e <0f000000> 2f800000 409e001c 38800000 BenH: Changed to use GFP_KERNEL, the allocator will do the right thing Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> --- arch/powerpc/sysdev/mpic.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 32a2e95..d46de1f 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -1053,11 +1053,10 @@ struct mpic * __init mpic_alloc(struct device_node *node, int intvec_top; u64 paddr = phys_addr; - mpic = alloc_bootmem(sizeof(struct mpic)); + mpic = kzalloc(sizeof(struct mpic), GFP_KERNEL); if (mpic == NULL) return NULL; - - memset(mpic, 0, sizeof(struct mpic)); + mpic->name = name; mpic->hc_irq = mpic_irq_chip; -- cgit v1.1 From 850f6ac316cf84bba63fdb775c897834eccbfaa3 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt <benh@kernel.crashing.org> Date: Thu, 18 Jun 2009 19:25:00 +0000 Subject: powerpc/mm: Make k(un)map_atomic out of line Those functions are way too big to be inline, besides, kmap_atomic() wants to call debug_kmap_atomic() which isn't exported for modules and causes module link failures. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> --- arch/powerpc/include/asm/highmem.h | 57 ++-------------------------- arch/powerpc/mm/Makefile | 1 + arch/powerpc/mm/highmem.c | 77 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 82 insertions(+), 53 deletions(-) create mode 100644 arch/powerpc/mm/highmem.c (limited to 'arch') diff --git a/arch/powerpc/include/asm/highmem.h b/arch/powerpc/include/asm/highmem.h index 684a73f..a74c4ee 100644 --- a/arch/powerpc/include/asm/highmem.h +++ b/arch/powerpc/include/asm/highmem.h @@ -22,9 +22,7 @@ #ifdef __KERNEL__ -#include <linux/init.h> #include <linux/interrupt.h> -#include <linux/highmem.h> #include <asm/kmap_types.h> #include <asm/tlbflush.h> #include <asm/page.h> @@ -62,6 +60,9 @@ extern pte_t *pkmap_page_table; extern void *kmap_high(struct page *page); extern void kunmap_high(struct page *page); +extern void *kmap_atomic_prot(struct page *page, enum km_type type, + pgprot_t prot); +extern void kunmap_atomic(void *kvaddr, enum km_type type); static inline void *kmap(struct page *page) { @@ -79,62 +80,11 @@ static inline void kunmap(struct page *page) kunmap_high(page); } -/* - * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap - * gives a more generic (and caching) interface. But kmap_atomic can - * be used in IRQ contexts, so in some (very limited) cases we need - * it. - */ -static inline void *kmap_atomic_prot(struct page *page, enum km_type type, pgprot_t prot) -{ - unsigned int idx; - unsigned long vaddr; - - /* even !CONFIG_PREEMPT needs this, for in_atomic in do_page_fault */ - pagefault_disable(); - if (!PageHighMem(page)) - return page_address(page); - - debug_kmap_atomic(type); - idx = type + KM_TYPE_NR*smp_processor_id(); - vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx); -#ifdef CONFIG_DEBUG_HIGHMEM - BUG_ON(!pte_none(*(kmap_pte-idx))); -#endif - __set_pte_at(&init_mm, vaddr, kmap_pte-idx, mk_pte(page, prot), 1); - local_flush_tlb_page(NULL, vaddr); - - return (void*) vaddr; -} - static inline void *kmap_atomic(struct page *page, enum km_type type) { return kmap_atomic_prot(page, type, kmap_prot); } -static inline void kunmap_atomic(void *kvaddr, enum km_type type) -{ -#ifdef CONFIG_DEBUG_HIGHMEM - unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK; - enum fixed_addresses idx = type + KM_TYPE_NR*smp_processor_id(); - - if (vaddr < __fix_to_virt(FIX_KMAP_END)) { - pagefault_enable(); - return; - } - - BUG_ON(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx)); - - /* - * force other mappings to Oops if they'll try to access - * this pte without first remap it - */ - pte_clear(&init_mm, vaddr, kmap_pte-idx); - local_flush_tlb_page(NULL, vaddr); -#endif - pagefault_enable(); -} - static inline struct page *kmap_atomic_to_page(void *ptr) { unsigned long idx, vaddr = (unsigned long) ptr; @@ -148,6 +98,7 @@ static inline struct page *kmap_atomic_to_page(void *ptr) return pte_page(*pte); } + #define flush_cache_kmaps() flush_cache_all() #endif /* __KERNEL__ */ diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile index 2d2192e..3e68363 100644 --- a/arch/powerpc/mm/Makefile +++ b/arch/powerpc/mm/Makefile @@ -30,3 +30,4 @@ obj-$(CONFIG_PPC_MM_SLICES) += slice.o obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o obj-$(CONFIG_PPC_SUBPAGE_PROT) += subpage-prot.o obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-noncoherent.o +obj-$(CONFIG_HIGHMEM) += highmem.o diff --git a/arch/powerpc/mm/highmem.c b/arch/powerpc/mm/highmem.c new file mode 100644 index 0000000..c2186c7 --- /dev/null +++ b/arch/powerpc/mm/highmem.c @@ -0,0 +1,77 @@ +/* + * highmem.c: virtual kernel memory mappings for high memory + * + * PowerPC version, stolen from the i386 version. + * + * Used in CONFIG_HIGHMEM systems for memory pages which + * are not addressable by direct kernel virtual addresses. + * + * Copyright (C) 1999 Gerhard Wichert, Siemens AG + * Gerhard.Wichert@pdb.siemens.de + * + * + * Redesigned the x86 32-bit VM architecture to deal with + * up to 16 Terrabyte physical memory. With current x86 CPUs + * we now support up to 64 Gigabytes physical RAM. + * + * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com> + * + * Reworked for PowerPC by various contributors. Moved from + * highmem.h by Benjamin Herrenschmidt (c) 2009 IBM Corp. + */ + +#include <linux/highmem.h> +#include <linux/module.h> + +/* + * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap + * gives a more generic (and caching) interface. But kmap_atomic can + * be used in IRQ contexts, so in some (very limited) cases we need + * it. + */ +void *kmap_atomic_prot(struct page *page, enum km_type type, pgprot_t prot) +{ + unsigned int idx; + unsigned long vaddr; + + /* even !CONFIG_PREEMPT needs this, for in_atomic in do_page_fault */ + pagefault_disable(); + if (!PageHighMem(page)) + return page_address(page); + + debug_kmap_atomic(type); + idx = type + KM_TYPE_NR*smp_processor_id(); + vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx); +#ifdef CONFIG_DEBUG_HIGHMEM + BUG_ON(!pte_none(*(kmap_pte-idx))); +#endif + __set_pte_at(&init_mm, vaddr, kmap_pte-idx, mk_pte(page, prot), 1); + local_flush_tlb_page(NULL, vaddr); + + return (void*) vaddr; +} +EXPORT_SYMBOL(kmap_atomic_prot); + +void kunmap_atomic(void *kvaddr, enum km_type type) +{ +#ifdef CONFIG_DEBUG_HIGHMEM + unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK; + enum fixed_addresses idx = type + KM_TYPE_NR*smp_processor_id(); + + if (vaddr < __fix_to_virt(FIX_KMAP_END)) { + pagefault_enable(); + return; + } + + BUG_ON(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx)); + + /* + * force other mappings to Oops if they'll try to access + * this pte without first remap it + */ + pte_clear(&init_mm, vaddr, kmap_pte-idx); + local_flush_tlb_page(NULL, vaddr); +#endif + pagefault_enable(); +} +EXPORT_SYMBOL(kunmap_atomic); -- cgit v1.1 From 4a5cbf17c49a6024a6d7baf03efdffb8ed252bb1 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt <benh@kernel.crashing.org> Date: Thu, 18 Jun 2009 19:17:39 +0000 Subject: powerpc: Map more memory early on 601 processors The 32-bit kernel relies on some memory being mapped covering the kernel text,data and bss at least, early during boot before the full MMU setup is done. On 32-bit "classic" processors, this is done using BAT registers. On 601, the size of BATs is limited to 8M and we use 2 of them for that initial mapping. This can become quite tight when enabling features like lockdep, so let's use a 3rd one to bump that mapping from 16M to 24M. We keep the 4th BAT free as it can be useful for debugging early boot code to map things like serial ports. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> --- arch/powerpc/kernel/head_32.S | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S index 4846946..fc21329 100644 --- a/arch/powerpc/kernel/head_32.S +++ b/arch/powerpc/kernel/head_32.S @@ -1124,9 +1124,8 @@ mmu_off: RFI /* - * Use the first pair of BAT registers to map the 1st 16MB - * of RAM to PAGE_OFFSET. From this point on we can't safely - * call OF any more. + * On 601, we use 3 BATs to map up to 24M of RAM at _PAGE_OFFSET + * (we keep one for debugging) and on others, we use one 256M BAT. */ initial_bats: lis r11,PAGE_OFFSET@h @@ -1136,12 +1135,16 @@ initial_bats: bne 4f ori r11,r11,4 /* set up BAT registers for 601 */ li r8,0x7f /* valid, block length = 8MB */ - oris r9,r11,0x800000@h /* set up BAT reg for 2nd 8M */ - oris r10,r8,0x800000@h /* set up BAT reg for 2nd 8M */ mtspr SPRN_IBAT0U,r11 /* N.B. 601 has valid bit in */ mtspr SPRN_IBAT0L,r8 /* lower BAT register */ - mtspr SPRN_IBAT1U,r9 - mtspr SPRN_IBAT1L,r10 + addis r11,r11,0x800000@h + addis r8,r8,0x800000@h + mtspr SPRN_IBAT1U,r11 + mtspr SPRN_IBAT1L,r8 + addis r11,r11,0x800000@h + addis r8,r8,0x800000@h + mtspr SPRN_IBAT2U,r11 + mtspr SPRN_IBAT2L,r8 isync blr -- cgit v1.1 From 5d38902c483881645ba16058cffaa478b81e5cfa Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt <benh@kernel.crashing.org> Date: Wed, 17 Jun 2009 17:43:59 +0000 Subject: powerpc: Add irqtrace support for 32-bit powerpc Based on initial work from: Dale Farnsworth <dale@farnsworth.org> Add the low level irq tracing hooks for 32-bit powerpc needed to enable full lockdep functionality. The approach taken to deal with the code in entry_32.S is that we don't trace all the transitions of MSR:EE when we just turn it off to peek at TI_FLAGS without races. Only when we are calling into C code or returning from exceptions with a state that have changed from what lockdep thinks. There's a little bugger though: If we take an exception that keeps interrupts enabled (such as an alignment exception) while interrupts are enabled, we will call trace_hardirqs_on() on the way back spurriously. Not a big deal, but to get rid of it would require remembering in pt_regs that the exception was one of the type that kept interrupts enabled which we don't know at this stage. (Well, we could test all cases for regs->trap but that sucks too much). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Tested-by: Kumar Gala <galak@kernel.crashing.org> --- arch/powerpc/Kconfig | 1 - arch/powerpc/include/asm/hw_irq.h | 20 +++--- arch/powerpc/kernel/entry_32.S | 127 ++++++++++++++++++++++++++++++++++++-- arch/powerpc/kernel/setup_32.c | 2 + 4 files changed, 135 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index bf6cedf..d00131c 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -62,7 +62,6 @@ config HAVE_LATENCYTOP_SUPPORT config TRACE_IRQFLAGS_SUPPORT bool - depends on PPC64 default y config LOCKDEP_SUPPORT diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h index 867ab8e..8b505ea 100644 --- a/arch/powerpc/include/asm/hw_irq.h +++ b/arch/powerpc/include/asm/hw_irq.h @@ -68,13 +68,13 @@ static inline int irqs_disabled_flags(unsigned long flags) #if defined(CONFIG_BOOKE) #define SET_MSR_EE(x) mtmsr(x) -#define local_irq_restore(flags) __asm__ __volatile__("wrtee %0" : : "r" (flags) : "memory") +#define raw_local_irq_restore(flags) __asm__ __volatile__("wrtee %0" : : "r" (flags) : "memory") #else #define SET_MSR_EE(x) mtmsr(x) -#define local_irq_restore(flags) mtmsr(flags) +#define raw_local_irq_restore(flags) mtmsr(flags) #endif -static inline void local_irq_disable(void) +static inline void raw_local_irq_disable(void) { #ifdef CONFIG_BOOKE __asm__ __volatile__("wrteei 0": : :"memory"); @@ -86,7 +86,7 @@ static inline void local_irq_disable(void) #endif } -static inline void local_irq_enable(void) +static inline void raw_local_irq_enable(void) { #ifdef CONFIG_BOOKE __asm__ __volatile__("wrteei 1": : :"memory"); @@ -98,7 +98,7 @@ static inline void local_irq_enable(void) #endif } -static inline void local_irq_save_ptr(unsigned long *flags) +static inline void raw_local_irq_save_ptr(unsigned long *flags) { unsigned long msr; msr = mfmsr(); @@ -110,12 +110,12 @@ static inline void local_irq_save_ptr(unsigned long *flags) #endif } -#define local_save_flags(flags) ((flags) = mfmsr()) -#define local_irq_save(flags) local_irq_save_ptr(&flags) -#define irqs_disabled() ((mfmsr() & MSR_EE) == 0) +#define raw_local_save_flags(flags) ((flags) = mfmsr()) +#define raw_local_irq_save(flags) raw_local_irq_save_ptr(&flags) +#define raw_irqs_disabled() ((mfmsr() & MSR_EE) == 0) +#define raw_irqs_disabled_flags(flags) (((flags) & MSR_EE) == 0) -#define hard_irq_enable() local_irq_enable() -#define hard_irq_disable() local_irq_disable() +#define hard_irq_disable() raw_local_irq_disable() static inline int irqs_disabled_flags(unsigned long flags) { diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S index 4dd38f1..3cadba6 100644 --- a/arch/powerpc/kernel/entry_32.S +++ b/arch/powerpc/kernel/entry_32.S @@ -191,11 +191,49 @@ transfer_to_handler_cont: mflr r9 lwz r11,0(r9) /* virtual address of handler */ lwz r9,4(r9) /* where to go when done */ +#ifdef CONFIG_TRACE_IRQFLAGS + lis r12,reenable_mmu@h + ori r12,r12,reenable_mmu@l + mtspr SPRN_SRR0,r12 + mtspr SPRN_SRR1,r10 + SYNC + RFI +reenable_mmu: /* re-enable mmu so we can */ + mfmsr r10 + lwz r12,_MSR(r1) + xor r10,r10,r12 + andi. r10,r10,MSR_EE /* Did EE change? */ + beq 1f + + /* Save handler and return address into the 2 unused words + * of the STACK_FRAME_OVERHEAD (sneak sneak sneak). Everything + * else can be recovered from the pt_regs except r3 which for + * normal interrupts has been set to pt_regs and for syscalls + * is an argument, so we temporarily use ORIG_GPR3 to save it + */ + stw r9,8(r1) + stw r11,12(r1) + stw r3,ORIG_GPR3(r1) + bl trace_hardirqs_off + lwz r0,GPR0(r1) + lwz r3,ORIG_GPR3(r1) + lwz r4,GPR4(r1) + lwz r5,GPR5(r1) + lwz r6,GPR6(r1) + lwz r7,GPR7(r1) + lwz r8,GPR8(r1) + lwz r9,8(r1) + lwz r11,12(r1) +1: mtctr r11 + mtlr r9 + bctr /* jump to handler */ +#else /* CONFIG_TRACE_IRQFLAGS */ mtspr SPRN_SRR0,r11 mtspr SPRN_SRR1,r10 mtlr r9 SYNC RFI /* jump to handler, enable MMU */ +#endif /* CONFIG_TRACE_IRQFLAGS */ #if defined (CONFIG_6xx) || defined(CONFIG_E500) 4: rlwinm r12,r12,0,~_TLF_NAPPING @@ -251,6 +289,31 @@ _GLOBAL(DoSyscall) #ifdef SHOW_SYSCALLS bl do_show_syscall #endif /* SHOW_SYSCALLS */ +#ifdef CONFIG_TRACE_IRQFLAGS + /* Return from syscalls can (and generally will) hard enable + * interrupts. You aren't supposed to call a syscall with + * interrupts disabled in the first place. However, to ensure + * that we get it right vs. lockdep if it happens, we force + * that hard enable here with appropriate tracing if we see + * that we have been called with interrupts off + */ + mfmsr r11 + andi. r12,r11,MSR_EE + bne+ 1f + /* We came in with interrupts disabled, we enable them now */ + bl trace_hardirqs_on + mfmsr r11 + lwz r0,GPR0(r1) + lwz r3,GPR3(r1) + lwz r4,GPR4(r1) + ori r11,r11,MSR_EE + lwz r5,GPR5(r1) + lwz r6,GPR6(r1) + lwz r7,GPR7(r1) + lwz r8,GPR8(r1) + mtmsr r11 +1: +#endif /* CONFIG_TRACE_IRQFLAGS */ rlwinm r10,r1,0,0,(31-THREAD_SHIFT) /* current_thread_info() */ lwz r11,TI_FLAGS(r10) andi. r11,r11,_TIF_SYSCALL_T_OR_A @@ -275,6 +338,7 @@ ret_from_syscall: rlwinm r12,r1,0,0,(31-THREAD_SHIFT) /* current_thread_info() */ /* disable interrupts so current_thread_info()->flags can't change */ LOAD_MSR_KERNEL(r10,MSR_KERNEL) /* doesn't include MSR_EE */ + /* Note: We don't bother telling lockdep about it */ SYNC MTMSRD(r10) lwz r9,TI_FLAGS(r12) @@ -288,6 +352,19 @@ ret_from_syscall: oris r11,r11,0x1000 /* Set SO bit in CR */ stw r11,_CCR(r1) syscall_exit_cont: + lwz r8,_MSR(r1) +#ifdef CONFIG_TRACE_IRQFLAGS + /* If we are going to return from the syscall with interrupts + * off, we trace that here. It shouldn't happen though but we + * want to catch the bugger if it does right ? + */ + andi. r10,r8,MSR_EE + bne+ 1f + stw r3,GPR3(r1) + bl trace_hardirqs_off + lwz r3,GPR3(r1) +1: +#endif /* CONFIG_TRACE_IRQFLAGS */ #if defined(CONFIG_4xx) || defined(CONFIG_BOOKE) /* If the process has its own DBCR0 value, load it up. The internal debug mode bit tells us that dbcr0 should be loaded. */ @@ -311,7 +388,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX) mtlr r4 mtcr r5 lwz r7,_NIP(r1) - lwz r8,_MSR(r1) FIX_SRR1(r8, r0) lwz r2,GPR2(r1) lwz r1,GPR1(r1) @@ -394,7 +470,9 @@ syscall_exit_work: andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP) beq ret_from_except - /* Re-enable interrupts */ + /* Re-enable interrupts. There is no need to trace that with + * lockdep as we are supposed to have IRQs on at this point + */ ori r10,r10,MSR_EE SYNC MTMSRD(r10) @@ -705,6 +783,7 @@ ret_from_except: /* Hard-disable interrupts so that current_thread_info()->flags * can't change between when we test it and when we return * from the interrupt. */ + /* Note: We don't bother telling lockdep about it */ LOAD_MSR_KERNEL(r10,MSR_KERNEL) SYNC /* Some chip revs have problems here... */ MTMSRD(r10) /* disable interrupts */ @@ -744,11 +823,24 @@ resume_kernel: beq+ restore andi. r0,r3,MSR_EE /* interrupts off? */ beq restore /* don't schedule if so */ +#ifdef CONFIG_TRACE_IRQFLAGS + /* Lockdep thinks irqs are enabled, we need to call + * preempt_schedule_irq with IRQs off, so we inform lockdep + * now that we -did- turn them off already + */ + bl trace_hardirqs_off +#endif 1: bl preempt_schedule_irq rlwinm r9,r1,0,0,(31-THREAD_SHIFT) lwz r3,TI_FLAGS(r9) andi. r0,r3,_TIF_NEED_RESCHED bne- 1b +#ifdef CONFIG_TRACE_IRQFLAGS + /* And now, to properly rebalance the above, we tell lockdep they + * are being turned back on, which will happen when we return + */ + bl trace_hardirqs_on +#endif #else resume_kernel: #endif /* CONFIG_PREEMPT */ @@ -765,6 +857,28 @@ restore: stw r6,icache_44x_need_flush@l(r4) 1: #endif /* CONFIG_44x */ + + lwz r9,_MSR(r1) +#ifdef CONFIG_TRACE_IRQFLAGS + /* Lockdep doesn't know about the fact that IRQs are temporarily turned + * off in this assembly code while peeking at TI_FLAGS() and such. However + * we need to inform it if the exception turned interrupts off, and we + * are about to trun them back on. + * + * The problem here sadly is that we don't know whether the exceptions was + * one that turned interrupts off or not. So we always tell lockdep about + * turning them on here when we go back to wherever we came from with EE + * on, even if that may meen some redudant calls being tracked. Maybe later + * we could encode what the exception did somewhere or test the exception + * type in the pt_regs but that sounds overkill + */ + andi. r10,r9,MSR_EE + beq 1f + bl trace_hardirqs_on + lwz r9,_MSR(r1) +1: +#endif /* CONFIG_TRACE_IRQFLAGS */ + lwz r0,GPR0(r1) lwz r2,GPR2(r1) REST_4GPRS(3, r1) @@ -782,7 +896,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX) stwcx. r0,0,r1 /* to clear the reservation */ #if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE)) - lwz r9,_MSR(r1) andi. r10,r9,MSR_RI /* check if this exception occurred */ beql nonrecoverable /* at a bad place (MSR:RI = 0) */ @@ -805,7 +918,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX) MTMSRD(r10) /* clear the RI bit */ .globl exc_exit_restart exc_exit_restart: - lwz r9,_MSR(r1) lwz r12,_NIP(r1) FIX_SRR1(r9,r10) mtspr SPRN_SRR0,r12 @@ -1035,11 +1147,18 @@ do_work: /* r10 contains MSR_KERNEL here */ beq do_user_signal do_resched: /* r10 contains MSR_KERNEL here */ + /* Note: We don't need to inform lockdep that we are enabling + * interrupts here. As far as it knows, they are already enabled + */ ori r10,r10,MSR_EE SYNC MTMSRD(r10) /* hard-enable interrupts */ bl schedule recheck: + /* Note: And we don't tell it we are disabling them again + * neither. Those disable/enable cycles used to peek at + * TI_FLAGS aren't advertised. + */ LOAD_MSR_KERNEL(r10,MSR_KERNEL) SYNC MTMSRD(r10) /* disable interrupts */ diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index 1d15424..e1e3059 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -119,6 +119,8 @@ notrace unsigned long __init early_init(unsigned long dt_ptr) */ notrace void __init machine_init(unsigned long dt_ptr) { + lockdep_init(); + /* Enable early debugging if any specified (see udbg.h) */ udbg_early_init(); -- cgit v1.1 From f97bb36f705da0a86b3ea77bfeee3415fee0b025 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt <benh@kernel.crashing.org> Date: Tue, 16 Jun 2009 16:42:49 +0000 Subject: powerpc/rtas: Turn rtas lock into a raw spinlock RTAS currently uses a normal spinlock. However it can be called from contexts where this is not necessarily a good idea. For example, it can be called while syncing timebases, with the core timebase being frozen. Unfortunately, that will deadlock in case of lock contention when spinlock debugging is enabled as the spin lock debugging code will try to use __delay() which ... relies on the timebase being enabled. Also RTAS can be used in some low level IRQ handling code path so it may as well be a raw spinlock for -rt sake. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> --- arch/powerpc/include/asm/rtas.h | 2 +- arch/powerpc/kernel/rtas.c | 38 +++++++++++++++++++++++++++++--------- 2 files changed, 30 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/rtas.h b/arch/powerpc/include/asm/rtas.h index 01c1233..0af42d2 100644 --- a/arch/powerpc/include/asm/rtas.h +++ b/arch/powerpc/include/asm/rtas.h @@ -58,7 +58,7 @@ struct rtas_t { unsigned long entry; /* physical address pointer */ unsigned long base; /* physical address pointer */ unsigned long size; - spinlock_t lock; + raw_spinlock_t lock; struct rtas_args args; struct device_node *dev; /* virtual address pointer */ }; diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c index ee4c760..d9a9974 100644 --- a/arch/powerpc/kernel/rtas.c +++ b/arch/powerpc/kernel/rtas.c @@ -40,7 +40,7 @@ #include <asm/atomic.h> struct rtas_t rtas = { - .lock = SPIN_LOCK_UNLOCKED + .lock = __RAW_SPIN_LOCK_UNLOCKED }; EXPORT_SYMBOL(rtas); @@ -67,6 +67,28 @@ unsigned long rtas_rmo_buf; void (*rtas_flash_term_hook)(int); EXPORT_SYMBOL(rtas_flash_term_hook); +/* RTAS use home made raw locking instead of spin_lock_irqsave + * because those can be called from within really nasty contexts + * such as having the timebase stopped which would lockup with + * normal locks and spinlock debugging enabled + */ +static unsigned long lock_rtas(void) +{ + unsigned long flags; + + local_irq_save(flags); + preempt_disable(); + __raw_spin_lock_flags(&rtas.lock, flags); + return flags; +} + +static void unlock_rtas(unsigned long flags) +{ + __raw_spin_unlock(&rtas.lock); + local_irq_restore(flags); + preempt_enable(); +} + /* * call_rtas_display_status and call_rtas_display_status_delay * are designed only for very early low-level debugging, which @@ -79,7 +101,7 @@ static void call_rtas_display_status(char c) if (!rtas.base) return; - spin_lock_irqsave(&rtas.lock, s); + s = lock_rtas(); args->token = 10; args->nargs = 1; @@ -89,7 +111,7 @@ static void call_rtas_display_status(char c) enter_rtas(__pa(args)); - spin_unlock_irqrestore(&rtas.lock, s); + unlock_rtas(s); } static void call_rtas_display_status_delay(char c) @@ -411,8 +433,7 @@ int rtas_call(int token, int nargs, int nret, int *outputs, ...) if (!rtas.entry || token == RTAS_UNKNOWN_SERVICE) return -1; - /* Gotta do something different here, use global lock for now... */ - spin_lock_irqsave(&rtas.lock, s); + s = lock_rtas(); rtas_args = &rtas.args; rtas_args->token = token; @@ -439,8 +460,7 @@ int rtas_call(int token, int nargs, int nret, int *outputs, ...) outputs[i] = rtas_args->rets[i+1]; ret = (nret > 0)? rtas_args->rets[0]: 0; - /* Gotta do something different here, use global lock for now... */ - spin_unlock_irqrestore(&rtas.lock, s); + unlock_rtas(s); if (buff_copy) { log_error(buff_copy, ERR_TYPE_RTAS_LOG, 0); @@ -837,7 +857,7 @@ asmlinkage int ppc_rtas(struct rtas_args __user *uargs) buff_copy = get_errorlog_buffer(); - spin_lock_irqsave(&rtas.lock, flags); + flags = lock_rtas(); rtas.args = args; enter_rtas(__pa(&rtas.args)); @@ -848,7 +868,7 @@ asmlinkage int ppc_rtas(struct rtas_args __user *uargs) if (args.rets[0] == -1) errbuf = __fetch_rtas_last_error(buff_copy); - spin_unlock_irqrestore(&rtas.lock, flags); + unlock_rtas(flags); if (buff_copy) { if (errbuf) -- cgit v1.1 From c4007a2fbf5f82b7e694c22b5929c87e38415a56 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt <benh@kernel.crashing.org> Date: Tue, 16 Jun 2009 16:42:50 +0000 Subject: powerpc: Use one common impl. of RTAS timebase sync and use raw spinlock Several platforms use their own copy of what is essentially the same code, using RTAS to synchronize the timebases when bringing up new CPUs. This moves it all into a single common implementation and additionally turns the spinlock into a raw spinlock since the former can rely on the timebase not being frozen when spinlock debugging is enabled, and finally masks interrupts while the timebase is disabled. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> --- arch/powerpc/include/asm/rtas.h | 3 +++ arch/powerpc/kernel/rtas.c | 31 +++++++++++++++++++++++++++++++ arch/powerpc/platforms/cell/smp.c | 30 ++---------------------------- arch/powerpc/platforms/chrp/smp.c | 33 ++------------------------------- arch/powerpc/platforms/pseries/smp.c | 30 ++---------------------------- 5 files changed, 40 insertions(+), 87 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/rtas.h b/arch/powerpc/include/asm/rtas.h index 0af42d2..168fce7 100644 --- a/arch/powerpc/include/asm/rtas.h +++ b/arch/powerpc/include/asm/rtas.h @@ -245,5 +245,8 @@ static inline u32 rtas_config_addr(int busno, int devfn, int reg) (devfn << 8) | (reg & 0xff); } +extern void __cpuinit rtas_give_timebase(void); +extern void __cpuinit rtas_take_timebase(void); + #endif /* __KERNEL__ */ #endif /* _POWERPC_RTAS_H */ diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c index d9a9974..c434823 100644 --- a/arch/powerpc/kernel/rtas.c +++ b/arch/powerpc/kernel/rtas.c @@ -38,6 +38,7 @@ #include <asm/syscalls.h> #include <asm/smp.h> #include <asm/atomic.h> +#include <asm/time.h> struct rtas_t rtas = { .lock = __RAW_SPIN_LOCK_UNLOCKED @@ -971,3 +972,33 @@ int __init early_init_dt_scan_rtas(unsigned long node, /* break now */ return 1; } + +static raw_spinlock_t timebase_lock; +static u64 timebase = 0; + +void __cpuinit rtas_give_timebase(void) +{ + unsigned long flags; + + local_irq_save(flags); + hard_irq_disable(); + __raw_spin_lock(&timebase_lock); + rtas_call(rtas_token("freeze-time-base"), 0, 1, NULL); + timebase = get_tb(); + __raw_spin_unlock(&timebase_lock); + + while (timebase) + barrier(); + rtas_call(rtas_token("thaw-time-base"), 0, 1, NULL); + local_irq_restore(flags); +} + +void __cpuinit rtas_take_timebase(void) +{ + while (!timebase) + barrier(); + __raw_spin_lock(&timebase_lock); + set_tb(timebase >> 32, timebase & 0xffffffff); + timebase = 0; + __raw_spin_unlock(&timebase_lock); +} diff --git a/arch/powerpc/platforms/cell/smp.c b/arch/powerpc/platforms/cell/smp.c index 9046803..bc97fad 100644 --- a/arch/powerpc/platforms/cell/smp.c +++ b/arch/powerpc/platforms/cell/smp.c @@ -36,7 +36,6 @@ #include <asm/prom.h> #include <asm/smp.h> #include <asm/paca.h> -#include <asm/time.h> #include <asm/machdep.h> #include <asm/cputable.h> #include <asm/firmware.h> @@ -140,31 +139,6 @@ static void __devinit smp_cell_setup_cpu(int cpu) mtspr(SPRN_DABRX, DABRX_KERNEL | DABRX_USER); } -static DEFINE_SPINLOCK(timebase_lock); -static unsigned long timebase = 0; - -static void __devinit cell_give_timebase(void) -{ - spin_lock(&timebase_lock); - rtas_call(rtas_token("freeze-time-base"), 0, 1, NULL); - timebase = get_tb(); - spin_unlock(&timebase_lock); - - while (timebase) - barrier(); - rtas_call(rtas_token("thaw-time-base"), 0, 1, NULL); -} - -static void __devinit cell_take_timebase(void) -{ - while (!timebase) - barrier(); - spin_lock(&timebase_lock); - set_tb(timebase >> 32, timebase & 0xffffffff); - timebase = 0; - spin_unlock(&timebase_lock); -} - static void __devinit smp_cell_kick_cpu(int nr) { BUG_ON(nr < 0 || nr >= NR_CPUS); @@ -224,8 +198,8 @@ void __init smp_init_cell(void) /* Non-lpar has additional take/give timebase */ if (rtas_token("freeze-time-base") != RTAS_UNKNOWN_SERVICE) { - smp_ops->give_timebase = cell_give_timebase; - smp_ops->take_timebase = cell_take_timebase; + smp_ops->give_timebase = rtas_give_timebase; + smp_ops->take_timebase = rtas_take_timebase; } DBG(" <- smp_init_cell()\n"); diff --git a/arch/powerpc/platforms/chrp/smp.c b/arch/powerpc/platforms/chrp/smp.c index 10a4a4d..02cafec 100644 --- a/arch/powerpc/platforms/chrp/smp.c +++ b/arch/powerpc/platforms/chrp/smp.c @@ -26,7 +26,6 @@ #include <asm/io.h> #include <asm/prom.h> #include <asm/smp.h> -#include <asm/time.h> #include <asm/machdep.h> #include <asm/mpic.h> #include <asm/rtas.h> @@ -42,40 +41,12 @@ static void __devinit smp_chrp_setup_cpu(int cpu_nr) mpic_setup_this_cpu(); } -static DEFINE_SPINLOCK(timebase_lock); -static unsigned int timebase_upper = 0, timebase_lower = 0; - -void __devinit smp_chrp_give_timebase(void) -{ - spin_lock(&timebase_lock); - rtas_call(rtas_token("freeze-time-base"), 0, 1, NULL); - timebase_upper = get_tbu(); - timebase_lower = get_tbl(); - spin_unlock(&timebase_lock); - - while (timebase_upper || timebase_lower) - barrier(); - rtas_call(rtas_token("thaw-time-base"), 0, 1, NULL); -} - -void __devinit smp_chrp_take_timebase(void) -{ - while (!(timebase_upper || timebase_lower)) - barrier(); - spin_lock(&timebase_lock); - set_tb(timebase_upper, timebase_lower); - timebase_upper = 0; - timebase_lower = 0; - spin_unlock(&timebase_lock); - printk("CPU %i taken timebase\n", smp_processor_id()); -} - /* CHRP with openpic */ struct smp_ops_t chrp_smp_ops = { .message_pass = smp_mpic_message_pass, .probe = smp_mpic_probe, .kick_cpu = smp_chrp_kick_cpu, .setup_cpu = smp_chrp_setup_cpu, - .give_timebase = smp_chrp_give_timebase, - .take_timebase = smp_chrp_take_timebase, + .give_timebase = rtas_give_timebase, + .take_timebase = rtas_take_timebase, }; diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c index 1a231c3..1f8f6cf 100644 --- a/arch/powerpc/platforms/pseries/smp.c +++ b/arch/powerpc/platforms/pseries/smp.c @@ -35,7 +35,6 @@ #include <asm/prom.h> #include <asm/smp.h> #include <asm/paca.h> -#include <asm/time.h> #include <asm/machdep.h> #include <asm/cputable.h> #include <asm/firmware.h> @@ -118,31 +117,6 @@ static void __devinit smp_xics_setup_cpu(int cpu) } #endif /* CONFIG_XICS */ -static DEFINE_SPINLOCK(timebase_lock); -static unsigned long timebase = 0; - -static void __devinit pSeries_give_timebase(void) -{ - spin_lock(&timebase_lock); - rtas_call(rtas_token("freeze-time-base"), 0, 1, NULL); - timebase = get_tb(); - spin_unlock(&timebase_lock); - - while (timebase) - barrier(); - rtas_call(rtas_token("thaw-time-base"), 0, 1, NULL); -} - -static void __devinit pSeries_take_timebase(void) -{ - while (!timebase) - barrier(); - spin_lock(&timebase_lock); - set_tb(timebase >> 32, timebase & 0xffffffff); - timebase = 0; - spin_unlock(&timebase_lock); -} - static void __devinit smp_pSeries_kick_cpu(int nr) { BUG_ON(nr < 0 || nr >= NR_CPUS); @@ -209,8 +183,8 @@ static void __init smp_init_pseries(void) /* Non-lpar has additional take/give timebase */ if (rtas_token("freeze-time-base") != RTAS_UNKNOWN_SERVICE) { - smp_ops->give_timebase = pSeries_give_timebase; - smp_ops->take_timebase = pSeries_take_timebase; + smp_ops->give_timebase = rtas_give_timebase; + smp_ops->take_timebase = rtas_take_timebase; } pr_debug(" <- smp_init_pSeries()\n"); -- cgit v1.1 From 6893ce6c1cdcf489b7ca8e6b6596208aa971a083 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt <benh@kernel.crashing.org> Date: Tue, 16 Jun 2009 16:42:51 +0000 Subject: powerpc/pasemi: Use raw spinlock in SMP TB sync spin_lock() can hang if called while the timebase is frozen, so use a raw lock instead, also disable interrupts while at it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> --- arch/powerpc/platforms/pasemi/setup.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/pasemi/setup.c b/arch/powerpc/platforms/pasemi/setup.c index 153051e..a461934 100644 --- a/arch/powerpc/platforms/pasemi/setup.c +++ b/arch/powerpc/platforms/pasemi/setup.c @@ -71,20 +71,25 @@ static void pas_restart(char *cmd) } #ifdef CONFIG_SMP -static DEFINE_SPINLOCK(timebase_lock); +static raw_spinlock_t timebase_lock; static unsigned long timebase; static void __devinit pas_give_timebase(void) { - spin_lock(&timebase_lock); + unsigned long flags; + + local_irq_save(flags); + hard_irq_disable(); + __raw_spin_lock(&timebase_lock); mtspr(SPRN_TBCTL, TBCTL_FREEZE); isync(); timebase = get_tb(); - spin_unlock(&timebase_lock); + __raw_spin_unlock(&timebase_lock); while (timebase) barrier(); mtspr(SPRN_TBCTL, TBCTL_RESTART); + local_irq_restore(flags); } static void __devinit pas_take_timebase(void) @@ -92,10 +97,10 @@ static void __devinit pas_take_timebase(void) while (!timebase) smp_rmb(); - spin_lock(&timebase_lock); + __raw_spin_lock(&timebase_lock); set_tb(timebase >> 32, timebase & 0xffffffff); timebase = 0; - spin_unlock(&timebase_lock); + __raw_spin_unlock(&timebase_lock); } struct smp_ops_t pas_smp_ops = { -- cgit v1.1 From 03c01aa740d4137ea2884328f2c29956c6084834 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt <benh@kernel.crashing.org> Date: Tue, 16 Jun 2009 15:55:18 +0000 Subject: powerpc/of: Fix usage of dev_set_name() in of_device_alloc() dev_set_name() takes a format string, so use it properly and avoid a warning with recent gcc's Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> --- arch/powerpc/kernel/of_device.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/of_device.c b/arch/powerpc/kernel/of_device.c index fa983a5..a359cb0 100644 --- a/arch/powerpc/kernel/of_device.c +++ b/arch/powerpc/kernel/of_device.c @@ -76,7 +76,7 @@ struct of_device *of_device_alloc(struct device_node *np, dev->dev.archdata.of_node = np; if (bus_id) - dev_set_name(&dev->dev, bus_id); + dev_set_name(&dev->dev, "%s", bus_id); else of_device_make_bus_id(dev); -- cgit v1.1 From f694cda89250f38782a5fd0b2d32fe33a39dcf37 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt <benh@kernel.crashing.org> Date: Tue, 16 Jun 2009 15:55:19 +0000 Subject: powerpc/440: Fix warning early debug code The function udbg_44x_as1_flush() has the wrong prototype causing a warning when enabling 440 early debug. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> --- arch/powerpc/kernel/udbg_16550.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/udbg_16550.c b/arch/powerpc/kernel/udbg_16550.c index 0362a89..acb74a1 100644 --- a/arch/powerpc/kernel/udbg_16550.c +++ b/arch/powerpc/kernel/udbg_16550.c @@ -219,7 +219,7 @@ void udbg_init_pas_realmode(void) #ifdef CONFIG_PPC_EARLY_DEBUG_44x #include <platforms/44x/44x.h> -static int udbg_44x_as1_flush(void) +static void udbg_44x_as1_flush(void) { if (udbg_comport) { while ((as1_readb(&udbg_comport->lsr) & LSR_THRE) == 0) -- cgit v1.1 From 6c16a74d423f584ed80815ee7b944f5b578dd37a Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt <benh@kernel.crashing.org> Date: Mon, 15 Jun 2009 16:53:43 +0000 Subject: powerpc/mm: Fix potential access to freed pages when using hugetlbfs When using 64k page sizes, our PTE pages are split in two halves, the second half containing the "extension" used to keep track of individual 4k pages when not using HW 64k pages. However, our page tables used for hugetlb have a slightly different format and don't carry that "second half". Our code that batched PTEs to be invalidated unconditionally reads the "second half" (to put it into the batch), which means that when called to invalidate hugetlb PTEs, it will access unrelated memory. It breaks when CONFIG_DEBUG_PAGEALLOC is enabled. This fixes it by only accessing the second half when the _PAGE_COMBO bit is set in the first half, which indicates that we are dealing with a "combo" page which represents 16x4k subpages. Anything else shouldn't have this bit set and thus not require loading from the second half. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> --- arch/powerpc/include/asm/pte-hash64-64k.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/pte-hash64-64k.h b/arch/powerpc/include/asm/pte-hash64-64k.h index e05d26f..82b7220 100644 --- a/arch/powerpc/include/asm/pte-hash64-64k.h +++ b/arch/powerpc/include/asm/pte-hash64-64k.h @@ -47,7 +47,8 @@ * generic accessors and iterators here */ #define __real_pte(e,p) ((real_pte_t) { \ - (e), pte_val(*((p) + PTRS_PER_PTE)) }) + (e), ((e) & _PAGE_COMBO) ? \ + (pte_val(*((p) + PTRS_PER_PTE))) : 0 }) #define __rpte_to_hidx(r,index) ((pte_val((r).pte) & _PAGE_COMBO) ? \ (((r).hidx >> ((index)<<2)) & 0xf) : ((pte_val((r).pte) >> 12) & 0xf)) #define __rpte_to_pte(r) ((r).pte) -- cgit v1.1 From a80cad950f2a562e60db1869dd29bc007c5a4b66 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto <morimoto.kuninori@renesas.com> Date: Fri, 26 Jun 2009 07:05:39 +0000 Subject: sh: ms7724se: Add sh_eth support Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/boards/mach-se/7724/setup.c | 106 +++++++++++++++++++++++++++++++++- arch/sh/include/mach-se/mach/se7724.h | 5 ++ 2 files changed, 109 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c index 9cd04bd..21d1800 100644 --- a/arch/sh/boards/mach-se/7724/setup.c +++ b/arch/sh/boards/mach-se/7724/setup.c @@ -23,6 +23,8 @@ #include <media/sh_mobile_ceu.h> #include <asm/io.h> #include <asm/heartbeat.h> +#include <asm/sh_eth.h> +#include <asm/clock.h> #include <asm/sh_keysc.h> #include <cpu/sh7724.h> #include <mach-se/mach/se7724.h> @@ -272,6 +274,34 @@ static struct platform_device keysc_device = { }, }; +/* SH Eth */ +static struct resource sh_eth_resources[] = { + [0] = { + .start = SH_ETH_ADDR, + .end = SH_ETH_ADDR + 0x1FC, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 91, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +struct sh_eth_plat_data sh_eth_plat = { + .phy = 0x1f, /* SMSC LAN8187 */ + .edmac_endian = EDMAC_LITTLE_ENDIAN, +}; + +static struct platform_device sh_eth_device = { + .name = "sh-eth", + .id = 0, + .dev = { + .platform_data = &sh_eth_plat, + }, + .num_resources = ARRAY_SIZE(sh_eth_resources), + .resource = sh_eth_resources, +}; + static struct platform_device *ms7724se_devices[] __initdata = { &heartbeat_device, &smc91x_eth_device, @@ -280,8 +310,57 @@ static struct platform_device *ms7724se_devices[] __initdata = { &ceu0_device, &ceu1_device, &keysc_device, + &sh_eth_device, }; +#define EEPROM_OP 0xBA206000 +#define EEPROM_ADR 0xBA206004 +#define EEPROM_DATA 0xBA20600C +#define EEPROM_STAT 0xBA206010 +#define EEPROM_STRT 0xBA206014 +static int __init sh_eth_is_eeprom_ready(void) +{ + int t = 10000; + + while (t--) { + if (!ctrl_inw(EEPROM_STAT)) + return 1; + cpu_relax(); + } + + printk(KERN_ERR "ms7724se can not access to eeprom\n"); + return 0; +} + +static void __init sh_eth_init(void) +{ + int i; + u16 mac[3]; + + /* check EEPROM status */ + if (!sh_eth_is_eeprom_ready()) + return; + + /* read MAC addr from EEPROM */ + for (i = 0 ; i < 3 ; i++) { + ctrl_outw(0x0, EEPROM_OP); /* read */ + ctrl_outw(i*2, EEPROM_ADR); + ctrl_outw(0x1, EEPROM_STRT); + if (!sh_eth_is_eeprom_ready()) + return; + + mac[i] = ctrl_inw(EEPROM_DATA); + mac[i] = ((mac[i] & 0xFF) << 8) | (mac[i] >> 8); /* swap */ + } + + /* reset sh-eth */ + ctrl_outl(0x1, SH_ETH_ADDR + 0x0); + + /* set MAC addr */ + ctrl_outl(((mac[0] << 16) | (mac[1])), SH_ETH_MAHR); + ctrl_outl((mac[2]), SH_ETH_MALR); +} + #define SW4140 0xBA201000 #define FPGA_OUT 0xBA200400 #define PORT_HIZA 0xA4050158 @@ -302,7 +381,8 @@ static int __init devices_setup(void) ctrl_outw(ctrl_inw(FPGA_OUT) & ~((1 << 1) | /* LAN */ (1 << 6) | /* VIDEO DAC */ - (1 << 12)), /* USB0 */ + (1 << 12) | /* USB0 */ + (1 << 14)), /* RMII */ FPGA_OUT); /* enable IRQ 0,1,2 */ @@ -404,6 +484,28 @@ static int __init devices_setup(void) gpio_request(GPIO_FN_KEYOUT1, NULL); gpio_request(GPIO_FN_KEYOUT0, NULL); + /* + * enable SH-Eth + * + * please remove J33 pin from your board !! + * + * ms7724 board should not use GPIO_FN_LNKSTA pin + * So, This time PTX5 is set to input pin + */ + gpio_request(GPIO_FN_RMII_RXD0, NULL); + gpio_request(GPIO_FN_RMII_RXD1, NULL); + gpio_request(GPIO_FN_RMII_TXD0, NULL); + gpio_request(GPIO_FN_RMII_TXD1, NULL); + gpio_request(GPIO_FN_RMII_REF_CLK, NULL); + gpio_request(GPIO_FN_RMII_TX_EN, NULL); + gpio_request(GPIO_FN_RMII_RX_ER, NULL); + gpio_request(GPIO_FN_RMII_CRS_DV, NULL); + gpio_request(GPIO_FN_MDIO, NULL); + gpio_request(GPIO_FN_MDC, NULL); + gpio_request(GPIO_PTX5, NULL); + gpio_direction_input(GPIO_PTX5); + sh_eth_init(); + if (sw & SW41_B) { /* SVGA */ lcdc_info.ch[0].lcd_cfg.xres = 800; @@ -437,7 +539,7 @@ static int __init devices_setup(void) } return platform_add_devices(ms7724se_devices, - ARRAY_SIZE(ms7724se_devices)); + ARRAY_SIZE(ms7724se_devices)); } device_initcall(devices_setup); diff --git a/arch/sh/include/mach-se/mach/se7724.h b/arch/sh/include/mach-se/mach/se7724.h index 74164b6..29514a3 100644 --- a/arch/sh/include/mach-se/mach/se7724.h +++ b/arch/sh/include/mach-se/mach/se7724.h @@ -20,6 +20,11 @@ */ #include <asm/addrspace.h> +/* SH Eth */ +#define SH_ETH_ADDR (0xA4600000) +#define SH_ETH_MAHR (SH_ETH_ADDR + 0x1C0) +#define SH_ETH_MALR (SH_ETH_ADDR + 0x1C8) + #define PA_LED (0xba203000) /* 8bit LED */ #define IRQ_MODE (0xba200010) #define IRQ0_SR (0xba200014) -- cgit v1.1 From 39a449d96ac3db9b6d498b6ffbf4c763746d5e8b Mon Sep 17 00:00:00 2001 From: Tim Abbott <tabbott@ksplice.com> Date: Tue, 23 Jun 2009 18:53:15 -0400 Subject: asm-generic/vmlinux.lds.h: shuffle INIT_TASK* macro names in vmlinux.lds.h We recently added a INIT_TASK(align) in include/asm-generic/vmlinux.lds.h, but there is already a macro INIT_TASK in include/linux/init_task.h, which is quite confusing. We should switch the macro in the linker script to INIT_TASK_DATA. (Sorry that I missed this in reviewing the patch). Since the macros are new, there is only one user of the INIT_TASK in vmlinux.lds.h, arch/mn10300/kernel/vmlinux.lds.S. However, we are currently using INIT_TASK_DATA for laying down an entire .data.init_task section. So rename that to INIT_TASK_DATA_SECTION. I would be worried about changing the meaning of INIT_TASK_DATA, but the old INIT_TASK_DATA implementation had no users, and in fact if anyone had tried to use it, it would have failed to compile because it didn't pass the alignment to the old INIT_TASK. Signed-off-by: Tim Abbott <tabbott@ksplice.com> Cc: David Howells <dhowells@redhat.com> Cc: Jesper Nilsson <Jesper.Nilsson@axis.com Signed-off-by: Sam Ravnborg <sam@ravnborg.org> --- arch/mn10300/kernel/vmlinux.lds.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mn10300/kernel/vmlinux.lds.S b/arch/mn10300/kernel/vmlinux.lds.S index bcebcef..c96ba3d 100644 --- a/arch/mn10300/kernel/vmlinux.lds.S +++ b/arch/mn10300/kernel/vmlinux.lds.S @@ -61,7 +61,7 @@ SECTIONS _edata = .; /* End of data section */ } - .data.init_task : { INIT_TASK(THREAD_SIZE); } + .data.init_task : { INIT_TASK_DATA(THREAD_SIZE); } /* might get freed after init */ . = ALIGN(PAGE_SIZE); -- cgit v1.1 From 9a24ee03aebc55cec00cc388b6727bff24ed433f Mon Sep 17 00:00:00 2001 From: Nicolas Ferre <nicolas.ferre@atmel.com> Date: Wed, 24 Jun 2009 17:13:48 +0100 Subject: [ARM] 5563/1: at91: at91sam9rlek lcd interface correction Here is a little update to the at91sam9rlek lcd interface. This will correct the power pin of the LCD. It will also add precision to the struct atmel_lcdfb_info scructure: backlight enabling and wiring mode correction: RGB wiring on the -EK board. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> --- arch/arm/mach-at91/board-sam9rlek.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c index 35e12a4..f6b5672 100644 --- a/arch/arm/mach-at91/board-sam9rlek.c +++ b/arch/arm/mach-at91/board-sam9rlek.c @@ -186,19 +186,21 @@ static struct fb_monspecs at91fb_default_monspecs = { static void at91_lcdc_power_control(int on) { if (on) - at91_set_gpio_value(AT91_PIN_PA30, 0); /* power up */ + at91_set_gpio_value(AT91_PIN_PC1, 0); /* power up */ else - at91_set_gpio_value(AT91_PIN_PA30, 1); /* power down */ + at91_set_gpio_value(AT91_PIN_PC1, 1); /* power down */ } /* Driver datas */ static struct atmel_lcdfb_info __initdata ek_lcdc_data = { + .lcdcon_is_backlight = true, .default_bpp = 16, .default_dmacon = ATMEL_LCDC_DMAEN, .default_lcdcon2 = AT91SAM9RL_DEFAULT_LCDCON2, .default_monspecs = &at91fb_default_monspecs, .atmel_lcdfb_power_control = at91_lcdc_power_control, .guard_time = 1, + .lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB, }; #else -- cgit v1.1 From ff8a4bae459a9b6455504127fcb78fdbc8e50e4c Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" <hpa@zytor.com> Date: Sat, 27 Jun 2009 12:22:27 -0700 Subject: Revert "x86: cap iomem_resource to addressable physical memory" This reverts commit 95ee14e4379c5e19c0897c872350570402014742. Mikael Petterson <mikepe@it.uu.se> reported that at least one of his systems will not boot as a result. We have ruled out the detection algorithm malfunctioning, so it is not a matter of producing the incorrect bitmasks; rather, something in the application of them fails. Revert the commit until we can root cause and correct this problem. -stable team: this means the underlying commit should be rejected. Reported-and-isolated-by: Mikael Petterson <mikpe@it.uu.se> Signed-off-by: H. Peter Anvin <hpa@zytor.com> LKML-Reference: <200906261559.n5QFxJH8027336@pilspetsen.it.uu.se> Cc: stable@kernel.org Cc: Grant Grundler <grundler@parisc-linux.org> --- arch/x86/kernel/cpu/common.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index 6b26d4d..f1961c0 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -848,9 +848,6 @@ static void __cpuinit identify_cpu(struct cpuinfo_x86 *c) #if defined(CONFIG_NUMA) && defined(CONFIG_X86_64) numa_add_cpu(smp_processor_id()); #endif - - /* Cap the iomem address space to what is addressable on all CPUs */ - iomem_resource.end &= (1ULL << c->x86_phys_bits) - 1; } #ifdef CONFIG_X86_64 -- cgit v1.1 From 29a4b9333bf9ffef12b3dd7cbf2e3dbe01152968 Mon Sep 17 00:00:00 2001 From: Avi Kivity <avi@redhat.com> Date: Tue, 19 May 2009 13:29:27 +0300 Subject: KVM: MMU: Allow 4K ptes with bit 7 (PAT) set Bit 7 is perfectly legal in the 4K page leve; it is used for the PAT. Signed-off-by: Avi Kivity <avi@redhat.com> --- arch/x86/kvm/mmu.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index 5c3d6e8..7030b5f 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -2157,7 +2157,7 @@ static void reset_rsvds_bits_mask(struct kvm_vcpu *vcpu, int level) else /* 32 bits PSE 4MB page */ context->rsvd_bits_mask[1][1] = rsvd_bits(13, 21); - context->rsvd_bits_mask[1][0] = ~0ull; + context->rsvd_bits_mask[1][0] = context->rsvd_bits_mask[1][0]; break; case PT32E_ROOT_LEVEL: context->rsvd_bits_mask[0][2] = @@ -2170,7 +2170,7 @@ static void reset_rsvds_bits_mask(struct kvm_vcpu *vcpu, int level) context->rsvd_bits_mask[1][1] = exb_bit_rsvd | rsvd_bits(maxphyaddr, 62) | rsvd_bits(13, 20); /* large page */ - context->rsvd_bits_mask[1][0] = ~0ull; + context->rsvd_bits_mask[1][0] = context->rsvd_bits_mask[1][0]; break; case PT64_ROOT_LEVEL: context->rsvd_bits_mask[0][3] = exb_bit_rsvd | @@ -2186,7 +2186,7 @@ static void reset_rsvds_bits_mask(struct kvm_vcpu *vcpu, int level) context->rsvd_bits_mask[1][1] = exb_bit_rsvd | rsvd_bits(maxphyaddr, 51) | rsvd_bits(13, 20); /* large page */ - context->rsvd_bits_mask[1][0] = ~0ull; + context->rsvd_bits_mask[1][0] = context->rsvd_bits_mask[1][0]; break; } } -- cgit v1.1 From ffdfa071bd6fa8f5e5964569bef41e067540d424 Mon Sep 17 00:00:00 2001 From: Jes Sorensen <jes@sgi.com> Date: Wed, 17 Jun 2009 11:08:08 +0200 Subject: KVM: ia64: fix ia64 build due to missing kallsyms_lookup() and double export Fix problem with double export of certain symbols from vsprintf.c which we do not wish to export from the kvm-intel.ko module. In addition, we do not have access to kallsyms_lookup() from the module, so make sure to #undef CONFIG_KALLSYMS Signed-off-by: Jes Sorensen <jes@sgi.com> Acked-by: Xiantao Zhang <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@redhat.com> --- arch/ia64/kvm/kvm_lib.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/ia64/kvm/kvm_lib.c b/arch/ia64/kvm/kvm_lib.c index a85cb61..f1268b8 100644 --- a/arch/ia64/kvm/kvm_lib.c +++ b/arch/ia64/kvm/kvm_lib.c @@ -11,5 +11,11 @@ * */ #undef CONFIG_MODULES +#include <linux/module.h> +#undef CONFIG_KALLSYMS +#undef EXPORT_SYMBOL +#undef EXPORT_SYMBOL_GPL +#define EXPORT_SYMBOL(sym) +#define EXPORT_SYMBOL_GPL(sym) #include "../../../lib/vsprintf.c" #include "../../../lib/ctype.c" -- cgit v1.1 From a3f9d3981cd82d65232b733eb792382237d686bd Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput <jaswinder@kernel.org> Date: Thu, 18 Jun 2009 16:53:25 +0530 Subject: KVM: kvm/x86_emulate.c toggle_interruptibility() should be static toggle_interruptibility() is used only by same file, it should be static. Fixed following sparse warning : arch/x86/kvm/x86_emulate.c:1364:6: warning: symbol 'toggle_interruptibility' was not declared. Should it be static? Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: Avi Kivity <avi@redhat.com> --- arch/x86/kvm/x86_emulate.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kvm/x86_emulate.c b/arch/x86/kvm/x86_emulate.c index c1b6c23..616de46 100644 --- a/arch/x86/kvm/x86_emulate.c +++ b/arch/x86/kvm/x86_emulate.c @@ -1361,7 +1361,7 @@ static inline int writeback(struct x86_emulate_ctxt *ctxt, return 0; } -void toggle_interruptibility(struct x86_emulate_ctxt *ctxt, u32 mask) +static void toggle_interruptibility(struct x86_emulate_ctxt *ctxt, u32 mask) { u32 int_shadow = kvm_x86_ops->get_interrupt_shadow(ctxt->vcpu, mask); /* -- cgit v1.1 From ef50f7ac7e234f9696555e41eab3de69c3d86166 Mon Sep 17 00:00:00 2001 From: Christian Borntraeger <borntraeger@de.ibm.com> Date: Tue, 23 Jun 2009 17:24:07 +0200 Subject: KVM: s390: Allow stfle instruction in the guest 2.6.31-rc introduced an architecture level set checker based on facility bits. e.g. if the kernel is compiled to run only on z9, several facility bits are checked very early and the kernel refuses to boot if a z9 specific facility is missing. Until now kvm on s390 did not implement the store facility extended (STFLE) instruction. A 2.6.31-rc kernel that was compiled for z9 or higher did not boot in kvm. This patch implements stfle. This patch should go in before 2.6.31. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com> --- arch/s390/include/asm/kvm_host.h | 4 +++- arch/s390/kvm/kvm-s390.c | 23 ++++++++++++++++++++++- arch/s390/kvm/priv.c | 2 +- 3 files changed, 26 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h index a27d0d5..1cd02f6 100644 --- a/arch/s390/include/asm/kvm_host.h +++ b/arch/s390/include/asm/kvm_host.h @@ -99,7 +99,9 @@ struct kvm_s390_sie_block { __u8 reservedd0[48]; /* 0x00d0 */ __u64 gcr[16]; /* 0x0100 */ __u64 gbea; /* 0x0180 */ - __u8 reserved188[120]; /* 0x0188 */ + __u8 reserved188[24]; /* 0x0188 */ + __u32 fac; /* 0x01a0 */ + __u8 reserved1a4[92]; /* 0x01a4 */ } __attribute__((packed)); struct kvm_vcpu_stat { diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c index c18b21d..90d9d1b 100644 --- a/arch/s390/kvm/kvm-s390.c +++ b/arch/s390/kvm/kvm-s390.c @@ -25,6 +25,7 @@ #include <asm/lowcore.h> #include <asm/pgtable.h> #include <asm/nmi.h> +#include <asm/system.h> #include "kvm-s390.h" #include "gaccess.h" @@ -69,6 +70,7 @@ struct kvm_stats_debugfs_item debugfs_entries[] = { { NULL } }; +static unsigned long long *facilities; /* Section: not file related */ void kvm_arch_hardware_enable(void *garbage) @@ -288,6 +290,7 @@ int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu) vcpu->arch.sie_block->gmsor = vcpu->kvm->arch.guest_origin; vcpu->arch.sie_block->ecb = 2; vcpu->arch.sie_block->eca = 0xC1002001U; + vcpu->arch.sie_block->fac = (int) (long) facilities; hrtimer_init(&vcpu->arch.ckc_timer, CLOCK_REALTIME, HRTIMER_MODE_ABS); tasklet_init(&vcpu->arch.tasklet, kvm_s390_tasklet, (unsigned long) vcpu); @@ -739,11 +742,29 @@ gfn_t unalias_gfn(struct kvm *kvm, gfn_t gfn) static int __init kvm_s390_init(void) { - return kvm_init(NULL, sizeof(struct kvm_vcpu), THIS_MODULE); + int ret; + ret = kvm_init(NULL, sizeof(struct kvm_vcpu), THIS_MODULE); + if (ret) + return ret; + + /* + * guests can ask for up to 255+1 double words, we need a full page + * to hold the maximum amount of facilites. On the other hand, we + * only set facilities that are known to work in KVM. + */ + facilities = (unsigned long long *) get_zeroed_page(GFP_DMA); + if (!facilities) { + kvm_exit(); + return -ENOMEM; + } + stfle(facilities, 1); + facilities[0] &= 0xff00fff3f0700000ULL; + return 0; } static void __exit kvm_s390_exit(void) { + free_page((unsigned long) facilities); kvm_exit(); } diff --git a/arch/s390/kvm/priv.c b/arch/s390/kvm/priv.c index 93ecd06..d426aac 100644 --- a/arch/s390/kvm/priv.c +++ b/arch/s390/kvm/priv.c @@ -158,7 +158,7 @@ static int handle_stfl(struct kvm_vcpu *vcpu) vcpu->stat.instruction_stfl++; /* only pass the facility bits, which we can handle */ - facility_list &= 0xfe00fff3; + facility_list &= 0xff00fff3; rc = copy_to_guest(vcpu, offsetof(struct _lowcore, stfl_fac_list), &facility_list, sizeof(facility_list)); -- cgit v1.1 From e3c7cb6ad7191e92ba89d00a7ae5f5dd1ca0c214 Mon Sep 17 00:00:00 2001 From: Avi Kivity <avi@redhat.com> Date: Tue, 16 Jun 2009 14:19:52 +0300 Subject: KVM: VMX: Handle vmx instruction vmexits IF a guest tries to use vmx instructions, inject a #UD to let it know the instruction is not implemented, rather than crashing. This prevents guest userspace from crashing the guest kernel. Cc: stable@kernel.org Signed-off-by: Avi Kivity <avi@redhat.com> --- arch/x86/kvm/vmx.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'arch') diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index e770bf3..356a0ce 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -3012,6 +3012,12 @@ static int handle_vmcall(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run) return 1; } +static int handle_vmx_insn(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run) +{ + kvm_queue_exception(vcpu, UD_VECTOR); + return 1; +} + static int handle_invlpg(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run) { unsigned long exit_qualification = vmcs_readl(EXIT_QUALIFICATION); @@ -3198,6 +3204,15 @@ static int (*kvm_vmx_exit_handlers[])(struct kvm_vcpu *vcpu, [EXIT_REASON_HLT] = handle_halt, [EXIT_REASON_INVLPG] = handle_invlpg, [EXIT_REASON_VMCALL] = handle_vmcall, + [EXIT_REASON_VMCLEAR] = handle_vmx_insn, + [EXIT_REASON_VMLAUNCH] = handle_vmx_insn, + [EXIT_REASON_VMPTRLD] = handle_vmx_insn, + [EXIT_REASON_VMPTRST] = handle_vmx_insn, + [EXIT_REASON_VMREAD] = handle_vmx_insn, + [EXIT_REASON_VMRESUME] = handle_vmx_insn, + [EXIT_REASON_VMWRITE] = handle_vmx_insn, + [EXIT_REASON_VMOFF] = handle_vmx_insn, + [EXIT_REASON_VMON] = handle_vmx_insn, [EXIT_REASON_TPR_BELOW_THRESHOLD] = handle_tpr_below_threshold, [EXIT_REASON_APIC_ACCESS] = handle_apic_access, [EXIT_REASON_WBINVD] = handle_wbinvd, -- cgit v1.1 From 9e6996240afcbe61682eab8eeaeb65c34333164d Mon Sep 17 00:00:00 2001 From: Amit Shah <amit.shah@redhat.com> Date: Mon, 15 Jun 2009 13:25:34 +0530 Subject: KVM: Ignore reads to K7 EVNTSEL MSRs In commit 7fe29e0faacb650d31b9e9f538203a157bec821d we ignored the reads to the P6 EVNTSEL MSRs. That fixed crashes on Intel machines. Ignore the reads to K7 EVNTSEL MSRs as well to fix this on AMD hosts. This fixes Kaspersky antivirus crashing Windows guests on AMD hosts. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com> --- arch/x86/kvm/x86.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 249540f..fe5474a 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -898,6 +898,7 @@ int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata) case MSR_VM_HSAVE_PA: case MSR_P6_EVNTSEL0: case MSR_P6_EVNTSEL1: + case MSR_K7_EVNTSEL0: data = 0; break; case MSR_MTRRcap: -- cgit v1.1 From bde892232532ed522bb56b04576d07f91e59b3c7 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput <jaswinder@kernel.org> Date: Wed, 20 May 2009 09:59:35 +0530 Subject: KVM: shut up uninit compiler warning in paging_tmpl.h MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Dixes compilation warning: CC arch/x86/kernel/io_delay.o arch/x86/kvm/paging_tmpl.h: In function ‘paging64_fetch’: arch/x86/kvm/paging_tmpl.h:279: warning: ‘sptep’ may be used uninitialized in this function arch/x86/kvm/paging_tmpl.h: In function ‘paging32_fetch’: arch/x86/kvm/paging_tmpl.h:279: warning: ‘sptep’ may be used uninitialized in this function warning is bogus (always have a least one level), but need to shut the compiler up. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: Avi Kivity <avi@redhat.com> --- arch/x86/kvm/paging_tmpl.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h index 258e459..67785f6 100644 --- a/arch/x86/kvm/paging_tmpl.h +++ b/arch/x86/kvm/paging_tmpl.h @@ -281,7 +281,7 @@ static u64 *FNAME(fetch)(struct kvm_vcpu *vcpu, gva_t addr, { unsigned access = gw->pt_access; struct kvm_mmu_page *shadow_page; - u64 spte, *sptep; + u64 spte, *sptep = NULL; int direct; gfn_t table_gfn; int r; -- cgit v1.1 From 9a660a6e1a0ebef72cf792583777234483a40022 Mon Sep 17 00:00:00 2001 From: Joe Perches <joe@perches.com> Date: Sun, 28 Jun 2009 16:26:13 +0000 Subject: arch/sh/boards/mach-se/7206/io.c: Remove unnecessary semicolons Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/boards/mach-se/7206/io.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sh/boards/mach-se/7206/io.c b/arch/sh/boards/mach-se/7206/io.c index 9c3a332..1804556 100644 --- a/arch/sh/boards/mach-se/7206/io.c +++ b/arch/sh/boards/mach-se/7206/io.c @@ -50,7 +50,7 @@ unsigned char se7206_inb_p(unsigned long port) unsigned short se7206_inw(unsigned long port) { - return *port2adr(port);; + return *port2adr(port); } void se7206_outb(unsigned char value, unsigned long port) -- cgit v1.1 From ec87805c63a96e8863385d79c864801a572a4ab8 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto <morimoto.kuninori@renesas.com> Date: Mon, 29 Jun 2009 07:40:00 +0000 Subject: sh: ms7724se: Enable sh_eth in defconfig. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/configs/se7724_defconfig | 25 +++++++++++++++++++++---- 1 file changed, 21 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/sh/configs/se7724_defconfig b/arch/sh/configs/se7724_defconfig index 3840270..3ee783a0 100644 --- a/arch/sh/configs/se7724_defconfig +++ b/arch/sh/configs/se7724_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.30 -# Thu Jun 18 16:09:05 2009 +# Mon Jun 29 16:28:43 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -14,6 +14,7 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_IRQ_PER_CPU=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y @@ -28,7 +29,9 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y +CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -88,10 +91,12 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y # # Performance Counters # +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y # CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y @@ -107,6 +112,10 @@ CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y @@ -119,7 +128,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -584,7 +593,6 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_LIBFC is not set # CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set @@ -624,7 +632,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set # CONFIG_STNIC is not set -# CONFIG_SH_ETH is not set +CONFIG_SH_ETH=y CONFIG_SMC91X=y # CONFIG_ENC28J60 is not set # CONFIG_ETHOC is not set @@ -801,6 +809,11 @@ CONFIG_SPI_BITBANG=y # # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y # CONFIG_GPIO_SYSFS is not set @@ -851,6 +864,8 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set # CONFIG_REGULATOR is not set CONFIG_MEDIA_SUPPORT=y @@ -1196,6 +1211,7 @@ CONFIG_RTC_DRV_PCF8563=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1260,6 +1276,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set CONFIG_FILE_LOCKING=y -- cgit v1.1 From 4078c444cf667f018c3fc7ebf141131a2b7c9480 Mon Sep 17 00:00:00 2001 From: Yinghai Lu <yinghai@kernel.org> Date: Mon, 29 Jun 2009 00:41:11 -0700 Subject: perf_counter, x86: Update x86_pmu after WARN() The print out should read the value before changing the value. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <4A487017.4090007@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/kernel/cpu/perf_counter.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c index b83474b..d4cf4ce 100644 --- a/arch/x86/kernel/cpu/perf_counter.c +++ b/arch/x86/kernel/cpu/perf_counter.c @@ -1496,17 +1496,17 @@ void __init init_hw_perf_counters(void) pr_cont("%s PMU driver.\n", x86_pmu.name); if (x86_pmu.num_counters > X86_PMC_MAX_GENERIC) { - x86_pmu.num_counters = X86_PMC_MAX_GENERIC; WARN(1, KERN_ERR "hw perf counters %d > max(%d), clipping!", x86_pmu.num_counters, X86_PMC_MAX_GENERIC); + x86_pmu.num_counters = X86_PMC_MAX_GENERIC; } perf_counter_mask = (1 << x86_pmu.num_counters) - 1; perf_max_counters = x86_pmu.num_counters; if (x86_pmu.num_counters_fixed > X86_PMC_MAX_FIXED) { - x86_pmu.num_counters_fixed = X86_PMC_MAX_FIXED; WARN(1, KERN_ERR "hw perf counters fixed %d > max(%d), clipping!", x86_pmu.num_counters_fixed, X86_PMC_MAX_FIXED); + x86_pmu.num_counters_fixed = X86_PMC_MAX_FIXED; } perf_counter_mask |= -- cgit v1.1 From 59c5fe6d848cae8fd51498d17532f5aad3866f98 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre <nicolas.ferre@atmel.com> Date: Mon, 29 Jun 2009 12:11:50 +0100 Subject: [ARM] 5562/2: at91: add gpio button support for at91sam9g20ek This adds input keyboard gpio support on at91sam9g20ek board. It adds button 3 and 4. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> --- arch/arm/mach-at91/board-sam9g20ek.c | 54 ++++++++++++++++++++++++++++++++++++ 1 file changed, 54 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index cc270be..a55398e 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -24,6 +24,8 @@ #include <linux/platform_device.h> #include <linux/spi/spi.h> #include <linux/spi/at73c213.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> #include <linux/clk.h> #include <mach/hardware.h> @@ -218,6 +220,56 @@ static struct gpio_led ek_leds[] = { } }; + +/* + * GPIO Buttons + */ +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +static struct gpio_keys_button ek_buttons[] = { + { + .gpio = AT91_PIN_PA30, + .code = BTN_3, + .desc = "Button 3", + .active_low = 1, + .wakeup = 1, + }, + { + .gpio = AT91_PIN_PA31, + .code = BTN_4, + .desc = "Button 4", + .active_low = 1, + .wakeup = 1, + } +}; + +static struct gpio_keys_platform_data ek_button_data = { + .buttons = ek_buttons, + .nbuttons = ARRAY_SIZE(ek_buttons), +}; + +static struct platform_device ek_button_device = { + .name = "gpio-keys", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &ek_button_data, + } +}; + +static void __init ek_add_device_buttons(void) +{ + at91_set_gpio_input(AT91_PIN_PA30, 1); /* btn3 */ + at91_set_deglitch(AT91_PIN_PA30, 1); + at91_set_gpio_input(AT91_PIN_PA31, 1); /* btn4 */ + at91_set_deglitch(AT91_PIN_PA31, 1); + + platform_device_register(&ek_button_device); +} +#else +static void __init ek_add_device_buttons(void) {} +#endif + + static struct i2c_board_info __initdata ek_i2c_devices[] = { { I2C_BOARD_INFO("24c512", 0x50), @@ -245,6 +297,8 @@ static void __init ek_board_init(void) at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices)); /* LEDs */ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); + /* Push Buttons */ + ek_add_device_buttons(); /* PCK0 provides MCLK to the WM8731 */ at91_set_B_periph(AT91_PIN_PC1, 0); /* SSC (for WM8731) */ -- cgit v1.1 From c7ab48d2acaf959e4d59c3f55d12fdb7ca9afd7c Mon Sep 17 00:00:00 2001 From: David Woodhouse <David.Woodhouse@intel.com> Date: Fri, 26 Jun 2009 19:10:36 +0100 Subject: intel-iommu: Clean up identity mapping code, remove CONFIG_DMAR_GFX_WA There's no need for the GFX workaround now we have 'iommu=pt' for the cases where people really care about performance. There's no need to have a special case for just one type of device. This also speeds up the iommu=pt path and reduces memory usage by setting up the si_domain _once_ and then using it for all devices, rather than giving each device its own private page tables. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> --- arch/x86/Kconfig | 15 ++------------- 1 file changed, 2 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index d1430ef..c07f722 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -1913,25 +1913,14 @@ config DMAR_DEFAULT_ON recommended you say N here while the DMAR code remains experimental. -config DMAR_GFX_WA - def_bool y - prompt "Support for Graphics workaround" - depends on DMAR - ---help--- - Current Graphics drivers tend to use physical address - for DMA and avoid using DMA APIs. Setting this config - option permits the IOMMU driver to set a unity map for - all the OS-visible memory. Hence the driver can continue - to use physical addresses for DMA. - config DMAR_FLOPPY_WA def_bool y depends on DMAR ---help--- - Floppy disk drivers are know to bypass DMA API calls + Floppy disk drivers are known to bypass DMA API calls thereby failing to work when IOMMU is enabled. This workaround will setup a 1:1 mapping for the first - 16M to make floppy (an ISA device) work. + 16MiB to make floppy (an ISA device) work. config INTR_REMAP bool "Support for Interrupt Remapping (EXPERIMENTAL)" -- cgit v1.1 From 977badb2f385db14d8ba3fcf02fbd7ead8e63d0f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Fernando=20Luis=20V=C3=A1zquez=20Cao?= <fernando@oss.ntt.co.jp> Date: Fri, 26 Jun 2009 11:27:41 +0900 Subject: PCI: remove pci_dac_dma_... APIs on mn10300 It seems that mn10300 made it upstream after Jan Beulich's pci_dac_dma_* cleanup work and still defines pci_dac_dma_supported(). This API is not required by the PCI subsystem anymore, so remove it. Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> --- arch/mn10300/include/asm/pci.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'arch') diff --git a/arch/mn10300/include/asm/pci.h b/arch/mn10300/include/asm/pci.h index e58b9a4..35d2ed6 100644 --- a/arch/mn10300/include/asm/pci.h +++ b/arch/mn10300/include/asm/pci.h @@ -70,10 +70,6 @@ struct pci_dev; */ #define PCI_DMA_BUS_IS_PHYS (1) - -/* This is always fine. */ -#define pci_dac_dma_supported(pci_dev, mask) (0) - /* Return the index of the PCI controller for device. */ static inline int pci_controller_num(struct pci_dev *dev) { -- cgit v1.1 From 2cdb3f1d834aab27a927be7555fbf4f9e43e9261 Mon Sep 17 00:00:00 2001 From: Yinghai Lu <yinghai@kernel.org> Date: Wed, 24 Jun 2009 19:01:19 -0700 Subject: x86/PCI: fix boundary checking when using root CRS Don't touch info->res_num if we are out of space. Acked-by: Gary Hade <garyhade@us.ibm.com> Tested-by: Gary Hade <garyhade@us.ibm.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> --- arch/x86/pci/acpi.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c index b26626d..8bf1529 100644 --- a/arch/x86/pci/acpi.c +++ b/arch/x86/pci/acpi.c @@ -68,6 +68,10 @@ setup_resource(struct acpi_resource *acpi_res, void *data) unsigned long flags; struct resource *root; int max_root_bus_resources = PCI_BUS_NUM_RESOURCES; + u64 start, end; + + if (bus_has_transparent_bridge(info->bus)) + max_root_bus_resources -= 3; status = resource_to_addr(acpi_res, &addr); if (!ACPI_SUCCESS(status)) @@ -84,25 +88,24 @@ setup_resource(struct acpi_resource *acpi_res, void *data) } else return AE_OK; - res = &info->res[info->res_num]; - res->name = info->name; - res->flags = flags; - res->start = addr.minimum + addr.translation_offset; - res->end = res->start + addr.address_length - 1; - res->child = NULL; - - if (bus_has_transparent_bridge(info->bus)) - max_root_bus_resources -= 3; + start = addr.minimum + addr.translation_offset; + end = start + addr.address_length - 1; if (info->res_num >= max_root_bus_resources) { printk(KERN_WARNING "PCI: Failed to allocate 0x%lx-0x%lx " "from %s for %s due to _CRS returning more than " - "%d resource descriptors\n", (unsigned long) res->start, - (unsigned long) res->end, root->name, info->name, + "%d resource descriptors\n", (unsigned long) start, + (unsigned long) end, root->name, info->name, max_root_bus_resources); - info->res_num++; return AE_OK; } + res = &info->res[info->res_num]; + res->name = info->name; + res->flags = flags; + res->start = start; + res->end = end; + res->child = NULL; + if (insert_resource(root, res)) { printk(KERN_ERR "PCI: Failed to allocate 0x%lx-0x%lx " "from %s for %s\n", (unsigned long) res->start, -- cgit v1.1 From 626fdfec1588ac1341a37805809d03a719d977e0 Mon Sep 17 00:00:00 2001 From: Yinghai Lu <yinghai@kernel.org> Date: Wed, 24 Jun 2009 20:00:12 -0700 Subject: x86/PCI: get root CRS before scanning children This allows us to remove adjust_transparent_bridge_resources and give x86_pci_root_bus_res_quirks a chance when _CRS is not used or not there. Acked-by: Gary Hade <garyhade@us.ibm.com> Tested-by: Gary Hade <garyhade@us.ibm.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> --- arch/x86/pci/acpi.c | 32 +++++++++----------------------- arch/x86/pci/amd_bus.c | 8 ++++++-- 2 files changed, 15 insertions(+), 25 deletions(-) (limited to 'arch') diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c index 8bf1529..1014eb4 100644 --- a/arch/x86/pci/acpi.c +++ b/arch/x86/pci/acpi.c @@ -118,23 +118,6 @@ setup_resource(struct acpi_resource *acpi_res, void *data) } static void -adjust_transparent_bridge_resources(struct pci_bus *bus) -{ - struct pci_dev *dev; - - list_for_each_entry(dev, &bus->devices, bus_list) { - int i; - u16 class = dev->class >> 8; - - if (class == PCI_CLASS_BRIDGE_PCI && dev->transparent) { - for(i = 3; i < PCI_BUS_NUM_RESOURCES; i++) - dev->subordinate->resource[i] = - dev->bus->resource[i - 3]; - } - } -} - -static void get_current_resources(struct acpi_device *device, int busnum, int domain, struct pci_bus *bus) { @@ -161,8 +144,6 @@ get_current_resources(struct acpi_device *device, int busnum, info.res_num = 0; acpi_walk_resources(device->handle, METHOD_NAME__CRS, setup_resource, &info); - if (info.res_num) - adjust_transparent_bridge_resources(bus); return; @@ -225,8 +206,15 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do */ memcpy(bus->sysdata, sd, sizeof(*sd)); kfree(sd); - } else - bus = pci_scan_bus_parented(NULL, busnum, &pci_root_ops, sd); + } else { + bus = pci_create_bus(NULL, busnum, &pci_root_ops, sd); + if (bus) { + if (pci_probe & PCI_USE__CRS) + get_current_resources(device, busnum, domain, + bus); + bus->subordinate = pci_scan_child_bus(bus); + } + } if (!bus) kfree(sd); @@ -241,8 +229,6 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do #endif } - if (bus && (pci_probe & PCI_USE__CRS)) - get_current_resources(device, busnum, domain, bus); return bus; } diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c index f893d6a..3ffa10d 100644 --- a/arch/x86/pci/amd_bus.c +++ b/arch/x86/pci/amd_bus.c @@ -100,8 +100,9 @@ void x86_pci_root_bus_res_quirks(struct pci_bus *b) int j; struct pci_root_info *info; - /* don't go for it if _CRS is used */ - if (pci_probe & PCI_USE__CRS) + /* don't go for it if _CRS is used already */ + if (b->resource[0] != &ioport_resource || + b->resource[1] != &iomem_resource) return; /* if only one root bus, don't need to anything */ @@ -116,6 +117,9 @@ void x86_pci_root_bus_res_quirks(struct pci_bus *b) if (i == pci_root_num) return; + printk(KERN_DEBUG "PCI: peer root bus %02x res updated from pci conf\n", + b->number); + info = &pci_root_info[i]; for (j = 0; j < info->res_num; j++) { struct resource *res; -- cgit v1.1 From 2be8412c6cef97b01dfaae71c04bf585d3d93a3b Mon Sep 17 00:00:00 2001 From: Alan Cox <alan@linux.intel.com> Date: Tue, 30 Jun 2009 14:02:00 -0700 Subject: [IA64] sprintf should not be used with same source & destination address This happens to work at the moment but isn't a good idea so fix it the simple way. Resolves-bug: http://bugzilla.kernel.org/show_bug.cgi?id=13576 Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> --- arch/ia64/sn/kernel/io_common.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/ia64/sn/kernel/io_common.c b/arch/ia64/sn/kernel/io_common.c index 76645cf..25831c4 100644 --- a/arch/ia64/sn/kernel/io_common.c +++ b/arch/ia64/sn/kernel/io_common.c @@ -435,7 +435,8 @@ void sn_generate_path(struct pci_bus *pci_bus, char *address) bricktype = MODULE_GET_BTYPE(moduleid); if ((bricktype == L1_BRICKTYPE_191010) || (bricktype == L1_BRICKTYPE_1932)) - sprintf(address, "%s^%d", address, geo_slot(geoid)); + sprintf(address + strlen(address), "^%d", + geo_slot(geoid)); } void __devinit -- cgit v1.1 From 58782b34e9ffcc04619634efe9658263344ed188 Mon Sep 17 00:00:00 2001 From: Joe Perches <joe@perches.com> Date: Sun, 28 Jun 2009 09:26:07 -0700 Subject: [IA64] Remove unnecessary semicolons Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Tony Luck <tony.luck@intel.com> --- arch/ia64/kernel/esi.c | 2 +- arch/ia64/kvm/process.c | 6 +++--- arch/ia64/kvm/vcpu.c | 2 +- arch/ia64/kvm/vtlb.c | 4 ++-- 4 files changed, 7 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/esi.c b/arch/ia64/kernel/esi.c index ebf4e98..d5764a3 100644 --- a/arch/ia64/kernel/esi.c +++ b/arch/ia64/kernel/esi.c @@ -65,7 +65,7 @@ static int __init esi_init (void) } if (!esi) - return -ENODEV;; + return -ENODEV; systab = __va(esi); diff --git a/arch/ia64/kvm/process.c b/arch/ia64/kvm/process.c index a8f84da..bb862fb 100644 --- a/arch/ia64/kvm/process.c +++ b/arch/ia64/kvm/process.c @@ -130,7 +130,7 @@ static void collect_interruption(struct kvm_vcpu *vcpu) if (vdcr & IA64_DCR_PP) { vpsr |= IA64_PSR_PP; } else { - vpsr &= ~IA64_PSR_PP;; + vpsr &= ~IA64_PSR_PP; } vcpu_set_psr(vcpu, vpsr); @@ -594,11 +594,11 @@ static void set_pal_call_data(struct kvm_vcpu *vcpu) p->u.pal_data.gr30 = vcpu_get_gr(vcpu, 30); break; case PAL_BRAND_INFO: - p->u.pal_data.gr29 = gr29;; + p->u.pal_data.gr29 = gr29; p->u.pal_data.gr30 = kvm_trans_pal_call_args(vcpu, gr30); break; default: - p->u.pal_data.gr29 = gr29;; + p->u.pal_data.gr29 = gr29; p->u.pal_data.gr30 = vcpu_get_gr(vcpu, 30); } p->u.pal_data.gr28 = gr28; diff --git a/arch/ia64/kvm/vcpu.c b/arch/ia64/kvm/vcpu.c index a2c6c15..46b02cb 100644 --- a/arch/ia64/kvm/vcpu.c +++ b/arch/ia64/kvm/vcpu.c @@ -406,7 +406,7 @@ void getreg(unsigned long regnum, unsigned long *val, * Now look at registers in [0-31] range and init correct UNAT */ addr = (unsigned long)regs; - unat = ®s->eml_unat;; + unat = ®s->eml_unat; addr += gr_info[regnum]; diff --git a/arch/ia64/kvm/vtlb.c b/arch/ia64/kvm/vtlb.c index 4290a42..20b3852 100644 --- a/arch/ia64/kvm/vtlb.c +++ b/arch/ia64/kvm/vtlb.c @@ -135,7 +135,7 @@ struct thash_data *__vtr_lookup(struct kvm_vcpu *vcpu, u64 va, int type) u64 rid; rid = vcpu_get_rr(vcpu, va); - rid = rid & RR_RID_MASK;; + rid = rid & RR_RID_MASK; if (type == D_TLB) { if (vcpu_quick_region_check(vcpu->arch.dtr_regions, va)) { for (trp = (struct thash_data *)&vcpu->arch.dtrs, i = 0; @@ -518,7 +518,7 @@ struct thash_data *vtlb_lookup(struct kvm_vcpu *v, u64 va, int is_data) struct thash_cb *hcb = &v->arch.vtlb; - cch = __vtr_lookup(v, va, is_data);; + cch = __vtr_lookup(v, va, is_data); if (cch) return cch; -- cgit v1.1 From fa276f36f3d8743295e067fb483b42dca8bd1ece Mon Sep 17 00:00:00 2001 From: Jan Beulich <JBeulich@novell.com> Date: Tue, 30 Jun 2009 12:01:57 +0100 Subject: [IA64] address compiler warnings perfmon.c/salinfo.c perfmon.c has a dubious cast directly from "int" to "void *". Add an intermediate cast to "long" to keep gcc happy. salinfo.c uses "down_trylock()" in a highly creative way (explained in the comments in the file) ... but it does kick out this warning: arch/ia64/kernel/salinfo.c:195: warning: ignoring return value of 'down_trylock' which people occasionally try to "fix" in ways that do not work. Use some casts to keep gcc quiet. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Tony Luck <tony.luck@intel.com> --- arch/ia64/kernel/perfmon.c | 2 +- arch/ia64/kernel/salinfo.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c index abce246..f178270 100644 --- a/arch/ia64/kernel/perfmon.c +++ b/arch/ia64/kernel/perfmon.c @@ -5603,7 +5603,7 @@ pfm_interrupt_handler(int irq, void *arg) * /proc/perfmon interface, for debug only */ -#define PFM_PROC_SHOW_HEADER ((void *)nr_cpu_ids+1) +#define PFM_PROC_SHOW_HEADER ((void *)(long)nr_cpu_ids+1) static void * pfm_proc_start(struct seq_file *m, loff_t *pos) diff --git a/arch/ia64/kernel/salinfo.c b/arch/ia64/kernel/salinfo.c index 7053c55..e6676fc 100644 --- a/arch/ia64/kernel/salinfo.c +++ b/arch/ia64/kernel/salinfo.c @@ -192,7 +192,7 @@ struct salinfo_platform_oemdata_parms { static void salinfo_work_to_do(struct salinfo_data *data) { - down_trylock(&data->mutex); + (void)(down_trylock(&data->mutex) ?: 0); up(&data->mutex); } -- cgit v1.1 From 9e314996e3dc5189b9b36dce67088e882e989897 Mon Sep 17 00:00:00 2001 From: Mike Galbraith <efault@gmx.de> Date: Tue, 30 Jun 2009 15:00:20 +0200 Subject: x86: Fix symbol annotation for arch/x86/lib/clear_page_64.S::clear_page_c Noticed the zero-sized function symbol while looking at 'perf' profiles, it causes the profiler to display those addresses in hexa. Turns out that this was wrong/bogus for an eternity. Signed-off-by: Mike Galbraith <efault@gmx.de> Acked-by: Alexander van Heukelum <heukelum@fastmail.fm> Acked-by: Cyrill Gorcunov <gorcunov@gmail.com> LKML-Reference: <1246366820.6538.1.camel@marge.simson.net> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/lib/clear_page_64.S | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86/lib/clear_page_64.S b/arch/x86/lib/clear_page_64.S index 9a10a78..ebeafcc 100644 --- a/arch/x86/lib/clear_page_64.S +++ b/arch/x86/lib/clear_page_64.S @@ -5,15 +5,14 @@ * Zero a page. * rdi page */ - ALIGN -clear_page_c: +ENTRY(clear_page_c) CFI_STARTPROC movl $4096/8,%ecx xorl %eax,%eax rep stosq ret CFI_ENDPROC -ENDPROC(clear_page) +ENDPROC(clear_page_c) ENTRY(clear_page) CFI_STARTPROC -- cgit v1.1 From 789d03f584484af85dbdc64935270c8e45f36ef7 Mon Sep 17 00:00:00 2001 From: Jan Beulich <JBeulich@novell.com> Date: Tue, 30 Jun 2009 11:52:23 +0100 Subject: x86: Fix fixmap ordering The merge of the 32- and 64-bit fixmap headers made a latent bug on x86-64 a real one: with the right config settings it is possible for FIX_OHCI1394_BASE to overlap the FIX_BTMAP_* range. Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: <stable@kernel.org> # for 2.6.30.x LKML-Reference: <4A4A0A8702000078000082E8@vpn.id2.novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/include/asm/fixmap.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h index 2d81af3..3eb0f79 100644 --- a/arch/x86/include/asm/fixmap.h +++ b/arch/x86/include/asm/fixmap.h @@ -114,9 +114,6 @@ enum fixed_addresses { FIX_TEXT_POKE0, /* reserve 2 pages for text_poke() */ FIX_TEXT_POKE1, __end_of_permanent_fixed_addresses, -#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT - FIX_OHCI1394_BASE, -#endif /* * 256 temporary boot-time mappings, used by early_ioremap(), * before ioremap() is functional. @@ -129,6 +126,9 @@ enum fixed_addresses { FIX_BTMAP_END = __end_of_permanent_fixed_addresses + 256 - (__end_of_permanent_fixed_addresses & 255), FIX_BTMAP_BEGIN = FIX_BTMAP_END + NR_FIX_BTMAPS*FIX_BTMAPS_SLOTS - 1, +#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT + FIX_OHCI1394_BASE, +#endif #ifdef CONFIG_X86_32 FIX_WP_TEST, #endif -- cgit v1.1 From 944c54e7fc5ccf961bef2b5449958436b85de459 Mon Sep 17 00:00:00 2001 From: Ingo Molnar <mingo@elte.hu> Date: Wed, 1 Jul 2009 00:10:16 +0200 Subject: ia64/PCI: adjust section annotation for pcibios_setup() Should be __init. Acked-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> --- arch/ia64/pci/pci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c index 729298f..7de76dd 100644 --- a/arch/ia64/pci/pci.c +++ b/arch/ia64/pci/pci.c @@ -537,7 +537,7 @@ pcibios_align_resource (void *data, struct resource *res, /* * PCI BIOS setup, always defaults to SAL interface */ -char * __devinit +char * __init pcibios_setup (char *str) { return str; -- cgit v1.1 From b01e8dc34379f4ba2f454390e340a025edbaaa7e Mon Sep 17 00:00:00 2001 From: Tejun Heo <tj@kernel.org> Date: Tue, 30 Jun 2009 11:41:18 -0700 Subject: alpha: fix percpu build breakage alpha percpu access requires custom SHIFT_PERCPU_PTR() definition for modules to work around addressing range limitation. This is done via generating inline assembly using C preprocessing which forces the assembler to generate external reference. This happens behind the compiler's back and makes the compiler think that static percpu variables in modules are unused. This used to be worked around by using __unused attribute for percpu variables which prevent the compiler from omitting the variable; however, recent declare/definition attribute unification change broke this as __used can't be used for declaration. Also, in the process, PER_CPU_ATTRIBUTES definition in alpha percpu.h got broken. This patch adds PER_CPU_DEF_ATTRIBUTES which is only used for definitions and make alpha use it to add __used for percpu variables in modules. This also fixes the PER_CPU_ATTRIBUTES double definition bug. Signed-off-by: Tejun Heo <tj@kernel.org> Tested-by: maximilian attems <max@stro.at> Acked-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Richard Henderson <rth@twiddle.net> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> --- arch/alpha/include/asm/percpu.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/alpha/include/asm/percpu.h b/arch/alpha/include/asm/percpu.h index 06c5c7a..b663f1f 100644 --- a/arch/alpha/include/asm/percpu.h +++ b/arch/alpha/include/asm/percpu.h @@ -30,7 +30,7 @@ extern unsigned long __per_cpu_offset[NR_CPUS]; #ifndef MODULE #define SHIFT_PERCPU_PTR(var, offset) RELOC_HIDE(&per_cpu_var(var), (offset)) -#define PER_CPU_ATTRIBUTES +#define PER_CPU_DEF_ATTRIBUTES #else /* * To calculate addresses of locally defined variables, GCC uses 32-bit @@ -49,7 +49,7 @@ extern unsigned long __per_cpu_offset[NR_CPUS]; : "=&r"(__ptr), "=&r"(tmp_gp)); \ (typeof(&per_cpu_var(var)))(__ptr + (offset)); }) -#define PER_CPU_ATTRIBUTES __used +#define PER_CPU_DEF_ATTRIBUTES __used #endif /* MODULE */ @@ -71,7 +71,7 @@ extern unsigned long __per_cpu_offset[NR_CPUS]; #define __get_cpu_var(var) per_cpu_var(var) #define __raw_get_cpu_var(var) per_cpu_var(var) -#define PER_CPU_ATTRIBUTES +#define PER_CPU_DEF_ATTRIBUTES #endif /* SMP */ -- cgit v1.1 From 66918dcdf91ad101194c749c18099e836ba3de2b Mon Sep 17 00:00:00 2001 From: Yinghai Lu <yinghai@kernel.org> Date: Tue, 30 Jun 2009 11:41:37 -0700 Subject: x86: only clear node_states for 64bit Nathan reported that | commit 73d60b7f747176dbdff826c4127d22e1fd3f9f74 | Author: Yinghai Lu <yinghai@kernel.org> | Date: Tue Jun 16 15:33:00 2009 -0700 | | page-allocator: clear N_HIGH_MEMORY map before we set it again | | SRAT tables may contains nodes of very small size. The arch code may | decide to not activate such a node. However, currently the early boot | code sets N_HIGH_MEMORY for such nodes. These nodes therefore seem to be | active although these nodes have no present pages. | | For 64bit N_HIGH_MEMORY == N_NORMAL_MEMORY, so that works for 64 bit too unintentionally and incorrectly clears the cpuset.mems cgroup attribute on an i386 kvm guest, meaning that cpuset.mems can not be used. Fix this by only clearing node_states[N_NORMAL_MEMORY] for 64bit only. and need to do save/restore for that in find_zone_movable_pfn Reported-by: Nathan Lynch <ntl@pobox.com> Tested-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@elte.hu>, Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> --- arch/x86/mm/init_64.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index c4378f4..b177652 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -598,6 +598,8 @@ void __init paging_init(void) sparse_memory_present_with_active_regions(MAX_NUMNODES); sparse_init(); + /* clear the default setting with node 0 */ + nodes_clear(node_states[N_NORMAL_MEMORY]); free_area_init_nodes(max_zone_pfns); } -- cgit v1.1 From aee3ff1b413cff44e7d91dd1901cacd8988ce9cf Mon Sep 17 00:00:00 2001 From: David Howells <dhowells@redhat.com> Date: Tue, 30 Jun 2009 22:24:54 +0100 Subject: FRV: Wire up new syscalls Wire up new syscalls rt_tgsigqueueinfo and perf_counter_open. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> --- arch/frv/include/asm/unistd.h | 4 +++- arch/frv/kernel/entry.S | 2 ++ 2 files changed, 5 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/frv/include/asm/unistd.h b/arch/frv/include/asm/unistd.h index 96d78d5..4a8fb42 100644 --- a/arch/frv/include/asm/unistd.h +++ b/arch/frv/include/asm/unistd.h @@ -341,10 +341,12 @@ #define __NR_inotify_init1 332 #define __NR_preadv 333 #define __NR_pwritev 334 +#define __NR_rt_tgsigqueueinfo 335 +#define __NR_perf_counter_open 336 #ifdef __KERNEL__ -#define NR_syscalls 335 +#define NR_syscalls 337 #define __ARCH_WANT_IPC_PARSE_VERSION /* #define __ARCH_WANT_OLD_READDIR */ diff --git a/arch/frv/kernel/entry.S b/arch/frv/kernel/entry.S index 356e0e3..fde1e44 100644 --- a/arch/frv/kernel/entry.S +++ b/arch/frv/kernel/entry.S @@ -1524,5 +1524,7 @@ sys_call_table: .long sys_inotify_init1 .long sys_preadv .long sys_pwritev + .long sys_rt_tgsigqueueinfo /* 335 */ + .long sys_perf_counter_open syscall_table_size = (. - sys_call_table) -- cgit v1.1 From 6086071005674eb982d898c75269c931240154cf Mon Sep 17 00:00:00 2001 From: David Howells <dhowells@redhat.com> Date: Tue, 30 Jun 2009 22:33:15 +0100 Subject: MN10300: Wire up new syscalls Wire up new syscalls rt_tgsigqueueinfo and perf_counter_open. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> --- arch/mn10300/include/asm/unistd.h | 4 +++- arch/mn10300/kernel/entry.S | 2 ++ 2 files changed, 5 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mn10300/include/asm/unistd.h b/arch/mn10300/include/asm/unistd.h index fef5b43..fad6861 100644 --- a/arch/mn10300/include/asm/unistd.h +++ b/arch/mn10300/include/asm/unistd.h @@ -346,10 +346,12 @@ #define __NR_inotify_init1 333 #define __NR_preadv 334 #define __NR_pwritev 335 +#define __NR_rt_tgsigqueueinfo 336 +#define __NR_perf_counter_open 337 #ifdef __KERNEL__ -#define NR_syscalls 326 +#define NR_syscalls 338 /* * specify the deprecated syscalls we want to support on this arch diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S index 7408a27..e0d2563 100644 --- a/arch/mn10300/kernel/entry.S +++ b/arch/mn10300/kernel/entry.S @@ -722,6 +722,8 @@ ENTRY(sys_call_table) .long sys_inotify_init1 .long sys_preadv .long sys_pwritev /* 335 */ + .long sys_rt_tgsigqueueinfo + .long sys_perf_counter_open nr_syscalls=(.-sys_call_table)/4 -- cgit v1.1 From 84f7597c116f811cfcb762e645fa258b7e585155 Mon Sep 17 00:00:00 2001 From: Magnus Damm <damm@igel.co.jp> Date: Wed, 1 Jul 2009 04:55:35 +0000 Subject: sh: fix se7724 ceu names Use "ceu0" and "ceu1" as CEU names instead of "ceu". This fixes "memchunk" kernel command line selection on the solution engine 7724 board. With this patch applied use "memchunk.ceu0=1m" or "memchunk.ceu1=1m" on kernel command line to override physically memory size to one meg for CEU0 or CEU1. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/boards/mach-se/7724/setup.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c index 21d1800..c050a8d 100644 --- a/arch/sh/boards/mach-se/7724/setup.c +++ b/arch/sh/boards/mach-se/7724/setup.c @@ -454,7 +454,7 @@ static int __init devices_setup(void) gpio_request(GPIO_FN_VIO0_CLK, NULL); gpio_request(GPIO_FN_VIO0_FLD, NULL); gpio_request(GPIO_FN_VIO0_HD, NULL); - platform_resource_setup_memory(&ceu0_device, "ceu", 4 << 20); + platform_resource_setup_memory(&ceu0_device, "ceu0", 4 << 20); /* enable CEU1 */ gpio_request(GPIO_FN_VIO1_D7, NULL); @@ -469,7 +469,7 @@ static int __init devices_setup(void) gpio_request(GPIO_FN_VIO1_HD, NULL); gpio_request(GPIO_FN_VIO1_VD, NULL); gpio_request(GPIO_FN_VIO1_CLK, NULL); - platform_resource_setup_memory(&ceu1_device, "ceu", 4 << 20); + platform_resource_setup_memory(&ceu1_device, "ceu1", 4 << 20); /* KEYSC */ gpio_request(GPIO_FN_KEYOUT5_IN5, NULL); -- cgit v1.1 From 0802d9e55cc6be6bd1b13f9dc9ef5aa6d24bca77 Mon Sep 17 00:00:00 2001 From: Magnus Damm <damm@igel.co.jp> Date: Wed, 1 Jul 2009 05:16:31 +0000 Subject: sh: re-add LCDC fbdev support to the Migo-R defconfig Re-add LCDC fbdev support to the Migo-R defconfig. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/configs/migor_defconfig | 53 +++++++++++++++++++++++++++++++++++++++-- 1 file changed, 51 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig index da627d2..b18cfd3 100644 --- a/arch/sh/configs/migor_defconfig +++ b/arch/sh/configs/migor_defconfig @@ -309,7 +309,7 @@ CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ip=on root=/dev/nfs ip=dhcp" +CONFIG_CMDLINE="console=tty0 console=ttySC0,115200 earlyprintk=serial ip=on root=/dev/nfs ip=dhcp" # # Bus options @@ -858,7 +858,35 @@ CONFIG_VIDEO_SH_MOBILE_CEU=y # # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +CONFIG_FB_SYS_FILLRECT=y +CONFIG_FB_SYS_COPYAREA=y +CONFIG_FB_SYS_IMAGEBLIT=y +# CONFIG_FB_FOREIGN_ENDIAN is not set +CONFIG_FB_SYS_FOPS=y +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_SH_MOBILE_LCDC=y +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -870,6 +898,27 @@ CONFIG_VIDEO_SH_MOBILE_CEU=y # Console display driver support # CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +# CONFIG_FONT_8x8 is not set +# CONFIG_FONT_8x16 is not set +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +CONFIG_FONT_MINI_4x6=y +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +# CONFIG_LOGO_LINUX_CLUT224 is not set +# CONFIG_LOGO_SUPERH_MONO is not set +CONFIG_LOGO_SUPERH_VGA16=y +# CONFIG_LOGO_SUPERH_CLUT224 is not set # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -- cgit v1.1 From 0a456fc58fb8ef3c53d18297ab5cd5d2a70d146b Mon Sep 17 00:00:00 2001 From: Anton Blanchard <anton@samba.org> Date: Wed, 1 Jul 2009 13:07:01 +1000 Subject: powerpc/perf_counter: Enable alternate PR/HV bits for POWER7 POWER7 has the same PR/HV bit layout as POWER6, so set the flag. Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Paul Mackerras <paulus@samba.org> Cc: a.p.zijlstra@chello.nl Cc: benh@kernel.crashing.org LKML-Reference: <20090701030701.GI3563@kryten> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/powerpc/kernel/power7-pmu.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/powerpc/kernel/power7-pmu.c b/arch/powerpc/kernel/power7-pmu.c index 5d755ef..5a9f5cb 100644 --- a/arch/powerpc/kernel/power7-pmu.c +++ b/arch/powerpc/kernel/power7-pmu.c @@ -358,6 +358,7 @@ static struct power_pmu power7_pmu = { .get_constraint = power7_get_constraint, .get_alternatives = power7_get_alternatives, .disable_pmc = power7_disable_pmc, + .flags = PPMU_ALT_SIPR, .n_generic = ARRAY_SIZE(power7_generic_events), .generic_events = power7_generic_events, .cache_events = &power7_cache_events, -- cgit v1.1 From 44973998a111dfda09b952aa0f27cad326a97793 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput <jaswinder@kernel.org> Date: Wed, 1 Jul 2009 17:49:38 +0530 Subject: x86: Remove double declaration of MSR_P6_EVNTSEL0 and MSR_P6_EVNTSEL1 MSR_P6_EVNTSEL0 and MSR_P6_EVNTSEL1 is already declared in msr-index.h. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> LKML-Reference: <1246450778.6940.8.camel@hpdv5.satnam> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/include/asm/msr-index.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h index 1692fb5..6be7fc2 100644 --- a/arch/x86/include/asm/msr-index.h +++ b/arch/x86/include/asm/msr-index.h @@ -246,10 +246,6 @@ #define MSR_IA32_MISC_ENABLE_TURBO_DISABLE (1ULL << 38) #define MSR_IA32_MISC_ENABLE_IP_PREF_DISABLE (1ULL << 39) -/* Intel Model 6 */ -#define MSR_P6_EVNTSEL0 0x00000186 -#define MSR_P6_EVNTSEL1 0x00000187 - /* P4/Xeon+ specific */ #define MSR_IA32_MCG_EAX 0x00000180 #define MSR_IA32_MCG_EBX 0x00000181 -- cgit v1.1 From b25ae679f613ed04aaf6ccbfdb9122fce668e4bb Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput <jaswinder@kernel.org> Date: Wed, 1 Jul 2009 19:53:14 +0530 Subject: x86: Mark device_nb as static and fix NULL noise This sparse warning: arch/x86/kernel/amd_iommu.c:1195:23: warning: symbol 'device_nb' was not declared. Should it be static? triggers because device_nb is global but is only used in a single .c file. change device_nb to static to fix that - this also addresses the sparse warning. This sparse warning: arch/x86/kernel/amd_iommu.c:1766:10: warning: Using plain integer as NULL pointer triggers because plain integer 0 is used in place of a NULL pointer. change 0 to NULL to fix that - this also address the sparse warning. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Cc: Joerg Roedel <joerg.roedel@amd.com> LKML-Reference: <1246458194.6940.20.camel@hpdv5.satnam> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/kernel/amd_iommu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c index 9372f04..6c99f50 100644 --- a/arch/x86/kernel/amd_iommu.c +++ b/arch/x86/kernel/amd_iommu.c @@ -1192,7 +1192,7 @@ out: return 0; } -struct notifier_block device_nb = { +static struct notifier_block device_nb = { .notifier_call = device_change_notifier, }; @@ -1763,7 +1763,7 @@ static void *alloc_coherent(struct device *dev, size_t size, flag |= __GFP_ZERO; virt_addr = (void *)__get_free_pages(flag, get_order(size)); if (!virt_addr) - return 0; + return NULL; paddr = virt_to_phys(virt_addr); -- cgit v1.1 From 76c06927f2a78143763dcff9b4c362d15eb29cc2 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput <jaswinder@kernel.org> Date: Wed, 1 Jul 2009 19:54:23 +0530 Subject: x86: Declare check_efer() before it gets used This sparse warning: arch/x86/mm/init.c:83:16: warning: symbol 'check_efer' was not declared. Should it be static? triggers because check_efer() is not decalared before using it. asm/proto.h includes the declaration of check_efer(), so including asm/proto.h to fix that - this also addresses the sparse warning. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> LKML-Reference: <1246458263.6940.22.camel@hpdv5.satnam> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/mm/init.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c index 47ce9a2..0607119 100644 --- a/arch/x86/mm/init.c +++ b/arch/x86/mm/init.c @@ -12,6 +12,7 @@ #include <asm/system.h> #include <asm/tlbflush.h> #include <asm/tlb.h> +#include <asm/proto.h> DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); -- cgit v1.1 From 3238c0c4d68d9a9022b411a11a4b933fbdb53a14 Mon Sep 17 00:00:00 2001 From: David Woodhouse <David.Woodhouse@intel.com> Date: Wed, 1 Jul 2009 18:56:16 +0100 Subject: intel-iommu: Make iommu=pt work on i386 too Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> --- arch/x86/kernel/pci-dma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c index 4763047..1a041bc 100644 --- a/arch/x86/kernel/pci-dma.c +++ b/arch/x86/kernel/pci-dma.c @@ -211,11 +211,11 @@ static __init int iommu_setup(char *p) #ifdef CONFIG_SWIOTLB if (!strncmp(p, "soft", 4)) swiotlb = 1; +#endif if (!strncmp(p, "pt", 2)) { iommu_pass_through = 1; return 1; } -#endif gart_parse_options(p); -- cgit v1.1 From 788d84bba47ea3eb377f7a3ae4fd1ee84b84877b Mon Sep 17 00:00:00 2001 From: David Woodhouse <dwmw2@infradead.org> Date: Wed, 1 Jul 2009 18:34:52 +0100 Subject: Fix pci_unmap_addr() et al on i386. We can run a 32-bit kernel on boxes with an IOMMU, so we need pci_unmap_addr() etc. to work -- without it, drivers will leak mappings. To be honest, this whole thing looks like it's more pain than it's worth; I'm half inclined to remove the no-op #else case altogether. But this is the minimal fix, which just does the right thing if CONFIG_DMAR is set. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Cc: stable@kernel.org [ for 2.6.30 ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> --- arch/x86/include/asm/pci.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h index 927958d..1ff685c 100644 --- a/arch/x86/include/asm/pci.h +++ b/arch/x86/include/asm/pci.h @@ -91,7 +91,7 @@ extern void pci_iommu_alloc(void); #define PCI_DMA_BUS_IS_PHYS (dma_ops->is_phys) -#if defined(CONFIG_X86_64) || defined(CONFIG_DMA_API_DEBUG) +#if defined(CONFIG_X86_64) || defined(CONFIG_DMAR) || defined(CONFIG_DMA_API_DEBUG) #define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \ dma_addr_t ADDR_NAME; -- cgit v1.1 From 34e19ada994fb9cb3d11873f2b734602e2135f3a Mon Sep 17 00:00:00 2001 From: Matt Fleming <matt@console-pimps.org> Date: Wed, 1 Jul 2009 18:14:18 +0000 Subject: sh: Fix compiler error and include the definition of IS_ERR_VALUE When arch/sh/include/asm/syscall_32.h is included from a file that doesn't also include linux/err.h the following error is produced, In file included from /home/matt/src/kernels/sh-2.6/arch/sh/include/asm/syscall.h:5, from kernel/trace/trace_syscalls.c:3: /home/matt/src/kernels/sh-2.6/arch/sh/include/asm/syscall_32.h: In function 'syscall_get_error': /home/matt/src/kernels/sh-2.6/arch/sh/include/asm/syscall_32.h:28: error: implicit declaration of function 'IS_ERR_VALUE' make[2]: *** [kernel/trace/trace_syscalls.o] Error 1 make[1]: *** [kernel/trace] Error 2 make: *** [kernel] Error 2 Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/include/asm/syscall_32.h | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/sh/include/asm/syscall_32.h b/arch/sh/include/asm/syscall_32.h index 5bc3468..6f83f2c 100644 --- a/arch/sh/include/asm/syscall_32.h +++ b/arch/sh/include/asm/syscall_32.h @@ -3,6 +3,7 @@ #include <linux/kernel.h> #include <linux/sched.h> +#include <linux/err.h> #include <asm/ptrace.h> /* The system call number is given by the user in R3 */ -- cgit v1.1 From 0406ca6d8e849d9dd027c8cb6791448e81411aef Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker <fweisbec@gmail.com> Date: Wed, 1 Jul 2009 21:02:09 +0200 Subject: perf_counter: Ignore the nmi call frames in the x86-64 backtraces About every callchains recorded with perf record are filled up including the internal perfcounter nmi frame: perf_callchain perf_counter_overflow intel_pmu_handle_irq perf_counter_nmi_handler notifier_call_chain atomic_notifier_call_chain notify_die do_nmi nmi We want ignore this frame as it's not interesting for instrumentation. To solve this, we simply ignore every frames from nmi context. New example of "perf report -s sym -c" after this patch: 9.59% [k] search_by_key 4.88% search_by_key reiserfs_read_locked_inode reiserfs_iget reiserfs_lookup do_lookup __link_path_walk path_walk do_path_lookup user_path_at vfs_fstatat vfs_lstat sys_newlstat system_call_fastpath __lxstat 0x406fb1 3.19% search_by_key search_by_entry_key reiserfs_find_entry reiserfs_lookup do_lookup __link_path_walk path_walk do_path_lookup user_path_at vfs_fstatat vfs_lstat sys_newlstat system_call_fastpath __lxstat 0x406fb1 [...] For now this patch only solves the problem in x86-64. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Anton Blanchard <anton@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <1246474930-6088-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/include/asm/stacktrace.h | 2 ++ arch/x86/kernel/cpu/perf_counter.c | 8 +++++++- arch/x86/kernel/dumpstack_32.c | 6 ++++++ arch/x86/kernel/dumpstack_64.c | 22 +++++++++++++++------- 4 files changed, 30 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/stacktrace.h b/arch/x86/include/asm/stacktrace.h index f517944..cf86a5e 100644 --- a/arch/x86/include/asm/stacktrace.h +++ b/arch/x86/include/asm/stacktrace.h @@ -3,6 +3,8 @@ extern int kstack_depth_to_print; +int x86_is_stack_id(int id, char *name); + /* Generic stack tracer with callbacks */ struct stacktrace_ops { diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c index d4cf4ce..36c3dc7 100644 --- a/arch/x86/kernel/cpu/perf_counter.c +++ b/arch/x86/kernel/cpu/perf_counter.c @@ -1561,6 +1561,7 @@ void callchain_store(struct perf_callchain_entry *entry, u64 ip) static DEFINE_PER_CPU(struct perf_callchain_entry, irq_entry); static DEFINE_PER_CPU(struct perf_callchain_entry, nmi_entry); +static DEFINE_PER_CPU(int, in_nmi_frame); static void @@ -1576,7 +1577,9 @@ static void backtrace_warning(void *data, char *msg) static int backtrace_stack(void *data, char *name) { - /* Process all stacks: */ + per_cpu(in_nmi_frame, smp_processor_id()) = + x86_is_stack_id(NMI_STACK, name); + return 0; } @@ -1584,6 +1587,9 @@ static void backtrace_address(void *data, unsigned long addr, int reliable) { struct perf_callchain_entry *entry = data; + if (per_cpu(in_nmi_frame, smp_processor_id())) + return; + if (reliable) callchain_store(entry, addr); } diff --git a/arch/x86/kernel/dumpstack_32.c b/arch/x86/kernel/dumpstack_32.c index d593cd1..bca5fba 100644 --- a/arch/x86/kernel/dumpstack_32.c +++ b/arch/x86/kernel/dumpstack_32.c @@ -19,6 +19,12 @@ #include "dumpstack.h" +/* Just a stub for now */ +int x86_is_stack_id(int id, char *name) +{ + return 0; +} + void dump_trace(struct task_struct *task, struct pt_regs *regs, unsigned long *stack, unsigned long bp, const struct stacktrace_ops *ops, void *data) diff --git a/arch/x86/kernel/dumpstack_64.c b/arch/x86/kernel/dumpstack_64.c index d35db59..54b0a32 100644 --- a/arch/x86/kernel/dumpstack_64.c +++ b/arch/x86/kernel/dumpstack_64.c @@ -19,10 +19,8 @@ #include "dumpstack.h" -static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack, - unsigned *usedp, char **idp) -{ - static char ids[][8] = { + +static char x86_stack_ids[][8] = { [DEBUG_STACK - 1] = "#DB", [NMI_STACK - 1] = "NMI", [DOUBLEFAULT_STACK - 1] = "#DF", @@ -33,6 +31,15 @@ static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack, N_EXCEPTION_STACKS + DEBUG_STKSZ / EXCEPTION_STKSZ - 2] = "#DB[?]" #endif }; + +int x86_is_stack_id(int id, char *name) +{ + return x86_stack_ids[id - 1] == name; +} + +static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack, + unsigned *usedp, char **idp) +{ unsigned k; /* @@ -61,7 +68,7 @@ static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack, if (*usedp & (1U << k)) break; *usedp |= 1U << k; - *idp = ids[k]; + *idp = x86_stack_ids[k]; return (unsigned long *)end; } /* @@ -81,12 +88,13 @@ static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack, do { ++j; end -= EXCEPTION_STKSZ; - ids[j][4] = '1' + (j - N_EXCEPTION_STACKS); + x86_stack_ids[j][4] = '1' + + (j - N_EXCEPTION_STACKS); } while (stack < end - EXCEPTION_STKSZ); if (*usedp & (1U << j)) break; *usedp |= 1U << j; - *idp = ids[j]; + *idp = x86_stack_ids[j]; return (unsigned long *)end; } #endif -- cgit v1.1 From 00460f41fffc0435dbb6ab4b058a190163d57ce6 Mon Sep 17 00:00:00 2001 From: David Howells <dhowells@redhat.com> Date: Thu, 2 Jul 2009 00:46:16 +0100 Subject: FRV: Implement atomic64_t Implement atomic64_t and its ops for FRV. Tested with the following patch: diff --git a/arch/frv/kernel/setup.c b/arch/frv/kernel/setup.c index 55e4fab..086d50d 100644 --- a/arch/frv/kernel/setup.c +++ b/arch/frv/kernel/setup.c @@ -746,6 +746,52 @@ static void __init parse_cmdline_early(char *cmdline) } /* end parse_cmdline_early() */ +static atomic64_t xxx; + +static void test_atomic64(void) +{ + atomic64_set(&xxx, 0x12300000023LL); + + mb(); + BUG_ON(atomic64_read(&xxx) != 0x12300000023LL); + mb(); + if (atomic64_inc_return(&xxx) != 0x12300000024LL) + BUG(); + mb(); + BUG_ON(atomic64_read(&xxx) != 0x12300000024LL); + mb(); + if (atomic64_sub_return(0x36900000050LL, &xxx) != -0x2460000002cLL) + BUG(); + mb(); + BUG_ON(atomic64_read(&xxx) != -0x2460000002cLL); + mb(); + if (atomic64_dec_return(&xxx) != -0x2460000002dLL) + BUG(); + mb(); + BUG_ON(atomic64_read(&xxx) != -0x2460000002dLL); + mb(); + if (atomic64_add_return(0x36800000001LL, &xxx) != 0x121ffffffd4LL) + BUG(); + mb(); + BUG_ON(atomic64_read(&xxx) != 0x121ffffffd4LL); + mb(); + if (atomic64_cmpxchg(&xxx, 0x123456789abcdefLL, 0x121ffffffd4LL) != 0x121ffffffd4LL) + BUG(); + mb(); + BUG_ON(atomic64_read(&xxx) != 0x121ffffffd4LL); + mb(); + if (atomic64_cmpxchg(&xxx, 0x121ffffffd4LL, 0x123456789abcdefLL) != 0x121ffffffd4LL) + BUG(); + mb(); + BUG_ON(atomic64_read(&xxx) != 0x123456789abcdefLL); + mb(); + if (atomic64_xchg(&xxx, 0xabcdef123456789LL) != 0x123456789abcdefLL) + BUG(); + mb(); + BUG_ON(atomic64_read(&xxx) != 0xabcdef123456789LL); + mb(); +} + /*****************************************************************************/ /* * @@ -845,6 +891,8 @@ void __init setup_arch(char **cmdline_p) // asm volatile("movgs %0,timerd" :: "r"(10000000)); // __set_HSR(0, __get_HSR(0) | HSR0_ETMD); + test_atomic64(); + } /* end setup_arch() */ #if 0 Note that this doesn't cover all the trivial wrappers, but does cover all the substantial implementations. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> --- arch/frv/include/asm/atomic.h | 68 +++++++++++++++++- arch/frv/include/asm/system.h | 2 + arch/frv/kernel/frv_ksyms.c | 4 ++ arch/frv/lib/Makefile | 2 +- arch/frv/lib/atomic-ops.S | 3 +- arch/frv/lib/atomic64-ops.S | 162 ++++++++++++++++++++++++++++++++++++++++++ 6 files changed, 236 insertions(+), 5 deletions(-) create mode 100644 arch/frv/lib/atomic64-ops.S (limited to 'arch') diff --git a/arch/frv/include/asm/atomic.h b/arch/frv/include/asm/atomic.h index 0409d98..00a57af 100644 --- a/arch/frv/include/asm/atomic.h +++ b/arch/frv/include/asm/atomic.h @@ -121,10 +121,72 @@ static inline void atomic_dec(atomic_t *v) #define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0) #define atomic_inc_and_test(v) (atomic_add_return(1, (v)) == 0) +/* + * 64-bit atomic ops + */ +typedef struct { + volatile long long counter; +} atomic64_t; + +#define ATOMIC64_INIT(i) { (i) } + +static inline long long atomic64_read(atomic64_t *v) +{ + long long counter; + + asm("ldd%I1 %M1,%0" + : "=e"(counter) + : "m"(v->counter)); + return counter; +} + +static inline void atomic64_set(atomic64_t *v, long long i) +{ + asm volatile("std%I0 %1,%M0" + : "=m"(v->counter) + : "e"(i)); +} + +extern long long atomic64_inc_return(atomic64_t *v); +extern long long atomic64_dec_return(atomic64_t *v); +extern long long atomic64_add_return(long long i, atomic64_t *v); +extern long long atomic64_sub_return(long long i, atomic64_t *v); + +static inline long long atomic64_add_negative(long long i, atomic64_t *v) +{ + return atomic64_add_return(i, v) < 0; +} + +static inline void atomic64_add(long long i, atomic64_t *v) +{ + atomic64_add_return(i, v); +} + +static inline void atomic64_sub(long long i, atomic64_t *v) +{ + atomic64_sub_return(i, v); +} + +static inline void atomic64_inc(atomic64_t *v) +{ + atomic64_inc_return(v); +} + +static inline void atomic64_dec(atomic64_t *v) +{ + atomic64_dec_return(v); +} + +#define atomic64_sub_and_test(i,v) (atomic64_sub_return((i), (v)) == 0) +#define atomic64_dec_and_test(v) (atomic64_dec_return((v)) == 0) +#define atomic64_inc_and_test(v) (atomic64_inc_return((v)) == 0) + /*****************************************************************************/ /* * exchange value with memory */ +extern uint64_t __xchg_64(uint64_t i, volatile void *v); + #ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS #define xchg(ptr, x) \ @@ -174,8 +236,10 @@ extern uint32_t __xchg_32(uint32_t i, volatile void *v); #define tas(ptr) (xchg((ptr), 1)) -#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), old, new)) -#define atomic_xchg(v, new) (xchg(&((v)->counter), new)) +#define atomic_cmpxchg(v, old, new) (cmpxchg(&(v)->counter, old, new)) +#define atomic_xchg(v, new) (xchg(&(v)->counter, new)) +#define atomic64_cmpxchg(v, old, new) (__cmpxchg_64(old, new, &(v)->counter)) +#define atomic64_xchg(v, new) (__xchg_64(new, &(v)->counter)) static __inline__ int atomic_add_unless(atomic_t *v, int a, int u) { diff --git a/arch/frv/include/asm/system.h b/arch/frv/include/asm/system.h index 7742ec0..efd22d9 100644 --- a/arch/frv/include/asm/system.h +++ b/arch/frv/include/asm/system.h @@ -208,6 +208,8 @@ extern void free_initmem(void); * - if (*ptr == test) then orig = *ptr; *ptr = test; * - if (*ptr != test) then orig = *ptr; */ +extern uint64_t __cmpxchg_64(uint64_t test, uint64_t new, volatile uint64_t *v); + #ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS #define cmpxchg(ptr, test, new) \ diff --git a/arch/frv/kernel/frv_ksyms.c b/arch/frv/kernel/frv_ksyms.c index 0316b3c..a89803b 100644 --- a/arch/frv/kernel/frv_ksyms.c +++ b/arch/frv/kernel/frv_ksyms.c @@ -67,6 +67,10 @@ EXPORT_SYMBOL(atomic_sub_return); EXPORT_SYMBOL(__xchg_32); EXPORT_SYMBOL(__cmpxchg_32); #endif +EXPORT_SYMBOL(atomic64_add_return); +EXPORT_SYMBOL(atomic64_sub_return); +EXPORT_SYMBOL(__xchg_64); +EXPORT_SYMBOL(__cmpxchg_64); EXPORT_SYMBOL(__debug_bug_printk); EXPORT_SYMBOL(__delay_loops_MHz); diff --git a/arch/frv/lib/Makefile b/arch/frv/lib/Makefile index 08be305..4ff2fb1 100644 --- a/arch/frv/lib/Makefile +++ b/arch/frv/lib/Makefile @@ -4,5 +4,5 @@ lib-y := \ __ashldi3.o __lshrdi3.o __muldi3.o __ashrdi3.o __negdi2.o __ucmpdi2.o \ - checksum.o memcpy.o memset.o atomic-ops.o \ + checksum.o memcpy.o memset.o atomic-ops.o atomic64-ops.o \ outsl_ns.o outsl_sw.o insl_ns.o insl_sw.o cache.o diff --git a/arch/frv/lib/atomic-ops.S b/arch/frv/lib/atomic-ops.S index ee0ac90..5e9e6ab 100644 --- a/arch/frv/lib/atomic-ops.S +++ b/arch/frv/lib/atomic-ops.S @@ -163,11 +163,10 @@ __cmpxchg_32: ld.p @(gr11,gr0),gr8 orcr cc7,cc7,cc3 subcc gr8,gr9,gr7,icc0 - bne icc0,#0,1f + bnelr icc0,#0 cst.p gr10,@(gr11,gr0) ,cc3,#1 corcc gr29,gr29,gr0 ,cc3,#1 beq icc3,#0,0b -1: bralr .size __cmpxchg_32, .-__cmpxchg_32 diff --git a/arch/frv/lib/atomic64-ops.S b/arch/frv/lib/atomic64-ops.S new file mode 100644 index 0000000..b6194ee --- /dev/null +++ b/arch/frv/lib/atomic64-ops.S @@ -0,0 +1,162 @@ +/* kernel atomic64 operations + * + * For an explanation of how atomic ops work in this arch, see: + * Documentation/frv/atomic-ops.txt + * + * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <asm/spr-regs.h> + + .text + .balign 4 + + +############################################################################### +# +# long long atomic64_inc_return(atomic64_t *v) +# +############################################################################### + .globl atomic64_inc_return + .type atomic64_inc_return,@function +atomic64_inc_return: + or.p gr8,gr8,gr10 +0: + orcc gr0,gr0,gr0,icc3 /* set ICC3.Z */ + ckeq icc3,cc7 + ldd.p @(gr10,gr0),gr8 /* LDD.P/ORCR must be atomic */ + orcr cc7,cc7,cc3 /* set CC3 to true */ + addicc gr9,#1,gr9,icc0 + addxi gr8,#0,gr8,icc0 + cstd.p gr8,@(gr10,gr0) ,cc3,#1 + corcc gr29,gr29,gr0 ,cc3,#1 /* clear ICC3.Z if store happens */ + beq icc3,#0,0b + bralr + + .size atomic64_inc_return, .-atomic64_inc_return + +############################################################################### +# +# long long atomic64_dec_return(atomic64_t *v) +# +############################################################################### + .globl atomic64_dec_return + .type atomic64_dec_return,@function +atomic64_dec_return: + or.p gr8,gr8,gr10 +0: + orcc gr0,gr0,gr0,icc3 /* set ICC3.Z */ + ckeq icc3,cc7 + ldd.p @(gr10,gr0),gr8 /* LDD.P/ORCR must be atomic */ + orcr cc7,cc7,cc3 /* set CC3 to true */ + subicc gr9,#1,gr9,icc0 + subxi gr8,#0,gr8,icc0 + cstd.p gr8,@(gr10,gr0) ,cc3,#1 + corcc gr29,gr29,gr0 ,cc3,#1 /* clear ICC3.Z if store happens */ + beq icc3,#0,0b + bralr + + .size atomic64_dec_return, .-atomic64_dec_return + +############################################################################### +# +# long long atomic64_add_return(long long i, atomic64_t *v) +# +############################################################################### + .globl atomic64_add_return + .type atomic64_add_return,@function +atomic64_add_return: + or.p gr8,gr8,gr4 + or gr9,gr9,gr5 +0: + orcc gr0,gr0,gr0,icc3 /* set ICC3.Z */ + ckeq icc3,cc7 + ldd.p @(gr10,gr0),gr8 /* LDD.P/ORCR must be atomic */ + orcr cc7,cc7,cc3 /* set CC3 to true */ + addcc gr9,gr5,gr9,icc0 + addx gr8,gr4,gr8,icc0 + cstd.p gr8,@(gr10,gr0) ,cc3,#1 + corcc gr29,gr29,gr0 ,cc3,#1 /* clear ICC3.Z if store happens */ + beq icc3,#0,0b + bralr + + .size atomic64_add_return, .-atomic64_add_return + +############################################################################### +# +# long long atomic64_sub_return(long long i, atomic64_t *v) +# +############################################################################### + .globl atomic64_sub_return + .type atomic64_sub_return,@function +atomic64_sub_return: + or.p gr8,gr8,gr4 + or gr9,gr9,gr5 +0: + orcc gr0,gr0,gr0,icc3 /* set ICC3.Z */ + ckeq icc3,cc7 + ldd.p @(gr10,gr0),gr8 /* LDD.P/ORCR must be atomic */ + orcr cc7,cc7,cc3 /* set CC3 to true */ + subcc gr9,gr5,gr9,icc0 + subx gr8,gr4,gr8,icc0 + cstd.p gr8,@(gr10,gr0) ,cc3,#1 + corcc gr29,gr29,gr0 ,cc3,#1 /* clear ICC3.Z if store happens */ + beq icc3,#0,0b + bralr + + .size atomic64_sub_return, .-atomic64_sub_return + +############################################################################### +# +# uint64_t __xchg_64(uint64_t i, uint64_t *v) +# +############################################################################### + .globl __xchg_64 + .type __xchg_64,@function +__xchg_64: + or.p gr8,gr8,gr4 + or gr9,gr9,gr5 +0: + orcc gr0,gr0,gr0,icc3 /* set ICC3.Z */ + ckeq icc3,cc7 + ldd.p @(gr10,gr0),gr8 /* LDD.P/ORCR must be atomic */ + orcr cc7,cc7,cc3 /* set CC3 to true */ + cstd.p gr4,@(gr10,gr0) ,cc3,#1 + corcc gr29,gr29,gr0 ,cc3,#1 /* clear ICC3.Z if store happens */ + beq icc3,#0,0b + bralr + + .size __xchg_64, .-__xchg_64 + +############################################################################### +# +# uint64_t __cmpxchg_64(uint64_t test, uint64_t new, uint64_t *v) +# +############################################################################### + .globl __cmpxchg_64 + .type __cmpxchg_64,@function +__cmpxchg_64: + or.p gr8,gr8,gr4 + or gr9,gr9,gr5 +0: + orcc gr0,gr0,gr0,icc3 /* set ICC3.Z */ + ckeq icc3,cc7 + ldd.p @(gr12,gr0),gr8 /* LDD.P/ORCR must be atomic */ + orcr cc7,cc7,cc3 + subcc gr8,gr4,gr0,icc0 + subcc.p gr9,gr5,gr0,icc1 + bnelr icc0,#0 + bnelr icc1,#0 + cstd.p gr10,@(gr12,gr0) ,cc3,#1 + corcc gr29,gr29,gr0 ,cc3,#1 /* clear ICC3.Z if store happens */ + beq icc3,#0,0b + bralr + + .size __cmpxchg_64, .-__cmpxchg_64 + -- cgit v1.1 From 42ca4fb69126dd9d0e25112edca1cacf846aa5c3 Mon Sep 17 00:00:00 2001 From: David Howells <dhowells@redhat.com> Date: Thu, 2 Jul 2009 00:46:21 +0100 Subject: FRV: Add basic performance counter support Add basic performance counter support to the FRV arch. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> --- arch/frv/Kconfig | 1 + arch/frv/include/asm/perf_counter.h | 17 +++++++++++++++++ arch/frv/lib/Makefile | 2 +- arch/frv/lib/perf_counter.c | 19 +++++++++++++++++++ 4 files changed, 38 insertions(+), 1 deletion(-) create mode 100644 arch/frv/include/asm/perf_counter.h create mode 100644 arch/frv/lib/perf_counter.c (limited to 'arch') diff --git a/arch/frv/Kconfig b/arch/frv/Kconfig index 8a5bd7a..b86e19c 100644 --- a/arch/frv/Kconfig +++ b/arch/frv/Kconfig @@ -7,6 +7,7 @@ config FRV default y select HAVE_IDE select HAVE_ARCH_TRACEHOOK + select HAVE_PERF_COUNTERS config ZONE_DMA bool diff --git a/arch/frv/include/asm/perf_counter.h b/arch/frv/include/asm/perf_counter.h new file mode 100644 index 0000000..ccf726e --- /dev/null +++ b/arch/frv/include/asm/perf_counter.h @@ -0,0 +1,17 @@ +/* FRV performance counter support + * + * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _ASM_PERF_COUNTER_H +#define _ASM_PERF_COUNTER_H + +#define PERF_COUNTER_INDEX_OFFSET 0 + +#endif /* _ASM_PERF_COUNTER_H */ diff --git a/arch/frv/lib/Makefile b/arch/frv/lib/Makefile index 4ff2fb1..0a37721 100644 --- a/arch/frv/lib/Makefile +++ b/arch/frv/lib/Makefile @@ -5,4 +5,4 @@ lib-y := \ __ashldi3.o __lshrdi3.o __muldi3.o __ashrdi3.o __negdi2.o __ucmpdi2.o \ checksum.o memcpy.o memset.o atomic-ops.o atomic64-ops.o \ - outsl_ns.o outsl_sw.o insl_ns.o insl_sw.o cache.o + outsl_ns.o outsl_sw.o insl_ns.o insl_sw.o cache.o perf_counter.o diff --git a/arch/frv/lib/perf_counter.c b/arch/frv/lib/perf_counter.c new file mode 100644 index 0000000..2000fee --- /dev/null +++ b/arch/frv/lib/perf_counter.c @@ -0,0 +1,19 @@ +/* Performance counter handling + * + * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#include <linux/perf_counter.h> + +/* + * mark the performance counter as pending + */ +void set_perf_counter_pending(void) +{ +} -- cgit v1.1 From 251e1e44b97852aa5e53e71c4b47e55b2dfd054e Mon Sep 17 00:00:00 2001 From: Ingo Molnar <mingo@elte.hu> Date: Thu, 2 Jul 2009 08:54:01 +0200 Subject: x86: Fix printk call in print_local_apic() Instead of this: [ 75.690022] <7>printing local APIC contents on CPU#0/0: [ 75.704406] ... APIC ID: 00000000 (0) [ 75.707905] ... APIC VERSION: 00060015 [ 75.722551] ... APIC TASKPRI: 00000000 (00) [ 75.725473] ... APIC PROCPRI: 00000000 [ 75.728592] ... APIC LDR: 00000001 [ 75.742137] ... APIC SPIV: 000001ff [ 75.744101] ... APIC ISR field: [ 75.746648] 0123456789abcdef0123456789abcdef [ 75.746649] <7>00000000000000000000000000000000 Improve the code to be saner and simpler and just print out the bitfield in a single line using hexa values - not as a (rather pointless) binary bitfield. Partially reused Linus's initial fix for this. Reported-and-Tested-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> LKML-Reference: <4A4C43BC.90506@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/kernel/apic/io_apic.c | 31 +++++++++++++------------------ 1 file changed, 13 insertions(+), 18 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 4d0216f..8fd1efb 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -1716,25 +1716,19 @@ __apicdebuginit(void) print_IO_APIC(void) return; } -__apicdebuginit(void) print_APIC_bitfield(int base) +__apicdebuginit(void) print_APIC_field(int base) { - unsigned int v; - int i, j; + int i; if (apic_verbosity == APIC_QUIET) return; - printk(KERN_DEBUG "0123456789abcdef0123456789abcdef\n" KERN_DEBUG); - for (i = 0; i < 8; i++) { - v = apic_read(base + i*0x10); - for (j = 0; j < 32; j++) { - if (v & (1<<j)) - printk("1"); - else - printk("0"); - } - printk("\n"); - } + printk(KERN_DEBUG); + + for (i = 0; i < 8; i++) + printk(KERN_CONT "%08x", apic_read(base + i*0x10)); + + printk(KERN_CONT "\n"); } __apicdebuginit(void) print_local_APIC(void *dummy) @@ -1745,7 +1739,8 @@ __apicdebuginit(void) print_local_APIC(void *dummy) if (apic_verbosity == APIC_QUIET) return; - printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n", + printk(KERN_DEBUG "\n"); + printk(KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n", smp_processor_id(), hard_smp_processor_id()); v = apic_read(APIC_ID); printk(KERN_INFO "... APIC ID: %08x (%01x)\n", v, read_apic_id()); @@ -1786,11 +1781,11 @@ __apicdebuginit(void) print_local_APIC(void *dummy) printk(KERN_DEBUG "... APIC SPIV: %08x\n", v); printk(KERN_DEBUG "... APIC ISR field:\n"); - print_APIC_bitfield(APIC_ISR); + print_APIC_field(APIC_ISR); printk(KERN_DEBUG "... APIC TMR field:\n"); - print_APIC_bitfield(APIC_TMR); + print_APIC_field(APIC_TMR); printk(KERN_DEBUG "... APIC IRR field:\n"); - print_APIC_bitfield(APIC_IRR); + print_APIC_field(APIC_IRR); if (APIC_INTEGRATED(ver)) { /* !82489DX */ if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */ -- cgit v1.1 From 7a6a3a086fe60bb3b739f66e47dc5bbc8f530d32 Mon Sep 17 00:00:00 2001 From: Joerg Roedel <joerg.roedel@amd.com> Date: Thu, 2 Jul 2009 12:23:23 +0200 Subject: amd-iommu: handle alias entries correctly in init code An alias entry in the ACPI table means that the device can send requests to the IOMMU with both device ids, its own and the alias. This is not handled properly in the ACPI init code. This patch fixes the issue. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> --- arch/x86/kernel/amd_iommu_init.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c index 10b2acc..ec72c77 100644 --- a/arch/x86/kernel/amd_iommu_init.c +++ b/arch/x86/kernel/amd_iommu_init.c @@ -691,6 +691,7 @@ static void __init init_iommu_from_acpi(struct amd_iommu *iommu, devid = e->devid; devid_to = e->ext >> 8; + set_dev_entry_from_acpi(iommu, devid , e->flags, 0); set_dev_entry_from_acpi(iommu, devid_to, e->flags, 0); amd_iommu_alias_table[devid] = devid_to; break; @@ -749,11 +750,13 @@ static void __init init_iommu_from_acpi(struct amd_iommu *iommu, devid = e->devid; for (dev_i = devid_start; dev_i <= devid; ++dev_i) { - if (alias) + if (alias) { amd_iommu_alias_table[dev_i] = devid_to; - set_dev_entry_from_acpi(iommu, - amd_iommu_alias_table[dev_i], - flags, ext_flags); + set_dev_entry_from_acpi(iommu, + devid_to, flags, ext_flags); + } + set_dev_entry_from_acpi(iommu, dev_i, + flags, ext_flags); } break; default: -- cgit v1.1 From 9be4b17c4c900f634ab9be3d13e116aa31edb7cb Mon Sep 17 00:00:00 2001 From: Linus Walleij <linus.walleij@stericsson.com> Date: Wed, 1 Jul 2009 23:41:12 +0100 Subject: [ARM] 5579/1: Updated U300 defconfig This defconfig update selects all the new U300 drivers merged for 2.6.31-rc1 in the merge window and add defaults for the new config options. It compiles and boots nicely from initramfs on the U300. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> --- arch/arm/configs/u300_defconfig | 92 ++++++++++++++++++++++++----------------- 1 file changed, 53 insertions(+), 39 deletions(-) (limited to 'arch') diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig index 2d827e1..4762d90 100644 --- a/arch/arm/configs/u300_defconfig +++ b/arch/arm/configs/u300_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc6 -# Mon Jun 1 09:18:22 2009 +# Linux kernel version: 2.6.31-rc1 +# Thu Jul 2 00:16:59 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -9,7 +9,7 @@ CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set +CONFIG_HAVE_TCM=y CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -18,13 +18,12 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -68,7 +67,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -81,8 +79,13 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y # CONFIG_AIO is not set + +# +# Performance Counters +# # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -94,6 +97,10 @@ CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y @@ -106,7 +113,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -138,9 +145,9 @@ CONFIG_DEFAULT_IOSCHED="deadline" # CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set @@ -216,8 +223,8 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_DCACHE_WRITETHROUGH is not set # CONFIG_CPU_CACHE_ROUND_ROBIN is not set -# CONFIG_OUTER_CACHE is not set CONFIG_ARM_VIC=y +CONFIG_ARM_VIC_NR=2 CONFIG_COMMON_CLKDEV=y # @@ -243,7 +250,6 @@ CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y CONFIG_OABI_COMPAT=y -CONFIG_ARCH_FLATMEM_HAS_HOLES=y # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set # CONFIG_HIGHMEM is not set @@ -258,17 +264,18 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set # # Boot options # CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="root=/dev/mtdblock2 rw rootfstype=yaffs2 console=ttyAMA0,115200n8 ab3100.force=0,0x48 mtdparts=u300nand:128k@0x0(bootrecords)ro,8064k@128k(free)ro,253952k@8192k(platform) lpj=515072" +CONFIG_CMDLINE="root=/dev/ram0 rw rootfstype=rootfs console=ttyAMA0,115200n8 lpj=515072" # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set @@ -359,6 +366,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -497,6 +505,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_AT25 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -538,6 +547,7 @@ CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_LM8323 is not set # CONFIG_KEYBOARD_GPIO is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set @@ -597,9 +607,11 @@ CONFIG_I2C_HELPER_AUTO=y # # I2C system bus drivers (mostly embedded / system-on-chip) # +# CONFIG_I2C_DESIGNWARE is not set # CONFIG_I2C_GPIO is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set +CONFIG_I2C_STU300=y # # External I2C/SMBus adapter drivers @@ -620,7 +632,6 @@ CONFIG_I2C_HELPER_AUTO=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -635,6 +646,7 @@ CONFIG_SPI_MASTER=y # # CONFIG_SPI_BITBANG is not set # CONFIG_SPI_GPIO is not set +CONFIG_SPI_PL022=y # # SPI Protocol Masters @@ -647,6 +659,7 @@ CONFIG_POWER_SUPPLY=y # CONFIG_PDA_POWER is not set # CONFIG_BATTERY_DS2760 is not set # CONFIG_BATTERY_BQ27x00 is not set +# CONFIG_BATTERY_MAX17040 is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set @@ -657,6 +670,7 @@ CONFIG_WATCHDOG=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set +CONFIG_COH901327_WATCHDOG=y CONFIG_SSB_POSSIBLE=y # @@ -678,22 +692,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +CONFIG_AB3100_CORE=y +# CONFIG_EZX_PCAP is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -760,6 +761,11 @@ CONFIG_SND_JACK=y # CONFIG_SND_VERBOSE_PROCFS is not set # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set # CONFIG_SND_DRIVERS is not set # CONFIG_SND_ARM is not set # CONFIG_SND_SPI is not set @@ -770,7 +776,7 @@ CONFIG_SND_SOC_I2C_AND_SPI=y # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set CONFIG_MMC=y -# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_DEBUG=y # CONFIG_MMC_UNSAFE_RESUME is not set # @@ -797,7 +803,7 @@ CONFIG_LEDS_CLASS=y # # CONFIG_LEDS_PCA9532 is not set # CONFIG_LEDS_GPIO is not set -# CONFIG_LEDS_LP5521 is not set +# CONFIG_LEDS_LP3944 is not set # CONFIG_LEDS_PCA955X is not set # CONFIG_LEDS_DAC124S085 is not set # CONFIG_LEDS_BD2802 is not set @@ -845,6 +851,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -887,7 +894,10 @@ CONFIG_REGULATOR=y # CONFIG_REGULATOR_DEBUG is not set # CONFIG_REGULATOR_FIXED_VOLTAGE is not set # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set # CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_REGULATOR_MAX1586 is not set +# CONFIG_REGULATOR_LP3971 is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -900,16 +910,20 @@ CONFIG_REGULATOR=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set CONFIG_FUSE_FS=y +# CONFIG_CUSE is not set # # Caches @@ -1033,6 +1047,7 @@ CONFIG_TIMER_STATS=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_PREEMPT is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -1063,18 +1078,16 @@ CONFIG_DEBUG_INFO=y # CONFIG_PAGE_POISONING is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -1109,6 +1122,7 @@ CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC32 is not set # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set +CONFIG_GENERIC_ALLOCATOR=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -- cgit v1.1 From 4ebfc3dba59fb84b315ebb0059347dc9342a32f1 Mon Sep 17 00:00:00 2001 From: Linus Walleij <linus.walleij@stericsson.com> Date: Thu, 2 Jul 2009 00:27:57 +0100 Subject: [ARM] 5581/1: U300 clock updates This adds a few default locks to the clocks (the clocks were used before the locks were initialized by code), then renames the clocks a bit to fit with the latest driver names (some changed during review). Lastly it moves the initialization of the clock debugfs entry to module_init() initcall level since the debugfs isn't up in core_initcall(). Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> --- arch/arm/mach-u300/clock.c | 121 ++++++++++++++++++++++++++++++--------------- 1 file changed, 80 insertions(+), 41 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-u300/clock.c b/arch/arm/mach-u300/clock.c index 5cd04d6..111f7ea 100644 --- a/arch/arm/mach-u300/clock.c +++ b/arch/arm/mach-u300/clock.c @@ -24,6 +24,7 @@ #include <linux/init.h> #include <linux/timer.h> #include <linux/io.h> +#include <linux/seq_file.h> #include <asm/clkdev.h> #include <mach/hardware.h> @@ -702,6 +703,7 @@ static struct clk amba_clk = { .rate = 52000000, /* this varies! */ .hw_ctrld = true, .reset = false, + .lock = __SPIN_LOCK_UNLOCKED(amba_clk.lock), }; /* @@ -720,6 +722,7 @@ static struct clk cpu_clk = { .set_rate = clk_set_rate_cpuclk, .get_rate = clk_get_rate_cpuclk, .round_rate = clk_round_rate_cpuclk, + .lock = __SPIN_LOCK_UNLOCKED(cpu_clk.lock), }; static struct clk nandif_clk = { @@ -732,6 +735,7 @@ static struct clk nandif_clk = { .clk_val = U300_SYSCON_SBCER_NANDIF_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(nandif_clk.lock), }; static struct clk semi_clk = { @@ -744,6 +748,7 @@ static struct clk semi_clk = { .clk_val = U300_SYSCON_SBCER_SEMI_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(semi_clk.lock), }; #ifdef CONFIG_MACH_U300_BS335 @@ -758,6 +763,7 @@ static struct clk isp_clk = { .clk_val = U300_SYSCON_SBCER_ISP_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(isp_clk.lock), }; static struct clk cds_clk = { @@ -771,6 +777,7 @@ static struct clk cds_clk = { .clk_val = U300_SYSCON_SBCER_CDS_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(cds_clk.lock), }; #endif @@ -785,6 +792,7 @@ static struct clk dma_clk = { .clk_val = U300_SYSCON_SBCER_DMAC_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(dma_clk.lock), }; static struct clk aaif_clk = { @@ -798,6 +806,7 @@ static struct clk aaif_clk = { .clk_val = U300_SYSCON_SBCER_AAIF_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(aaif_clk.lock), }; static struct clk apex_clk = { @@ -811,6 +820,7 @@ static struct clk apex_clk = { .clk_val = U300_SYSCON_SBCER_APEX_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(apex_clk.lock), }; static struct clk video_enc_clk = { @@ -825,6 +835,7 @@ static struct clk video_enc_clk = { .clk_val = U300_SYSCON_SBCER_VIDEO_ENC_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(video_enc_clk.lock), }; static struct clk xgam_clk = { @@ -839,6 +850,7 @@ static struct clk xgam_clk = { .get_rate = clk_get_rate_xgamclk, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(xgam_clk.lock), }; /* This clock is used to activate the video encoder */ @@ -854,6 +866,7 @@ static struct clk ahb_clk = { .enable = syscon_clk_enable, .disable = syscon_clk_disable, .get_rate = clk_get_rate_ahb_clk, + .lock = __SPIN_LOCK_UNLOCKED(ahb_clk.lock), }; @@ -871,6 +884,7 @@ static struct clk ahb_subsys_clk = { .enable = syscon_clk_enable, .disable = syscon_clk_disable, .get_rate = clk_get_rate_ahb_clk, + .lock = __SPIN_LOCK_UNLOCKED(ahb_subsys_clk.lock), }; static struct clk intcon_clk = { @@ -882,6 +896,8 @@ static struct clk intcon_clk = { .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, .res_mask = U300_SYSCON_RRR_INTCON_RESET_EN, /* INTCON can be reset but not clock-gated */ + .lock = __SPIN_LOCK_UNLOCKED(intcon_clk.lock), + }; static struct clk mspro_clk = { @@ -895,6 +911,7 @@ static struct clk mspro_clk = { .clk_val = U300_SYSCON_SBCER_MSPRO_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(mspro_clk.lock), }; static struct clk emif_clk = { @@ -909,6 +926,7 @@ static struct clk emif_clk = { .enable = syscon_clk_enable, .disable = syscon_clk_disable, .get_rate = clk_get_rate_emif_clk, + .lock = __SPIN_LOCK_UNLOCKED(emif_clk.lock), }; @@ -926,6 +944,7 @@ static struct clk fast_clk = { .clk_val = U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(fast_clk.lock), }; static struct clk mmcsd_clk = { @@ -942,6 +961,7 @@ static struct clk mmcsd_clk = { .round_rate = clk_round_rate_mclk, .disable = syscon_clk_disable, .enable = syscon_clk_enable, + .lock = __SPIN_LOCK_UNLOCKED(mmcsd_clk.lock), }; static struct clk i2s0_clk = { @@ -956,6 +976,7 @@ static struct clk i2s0_clk = { .enable = syscon_clk_enable, .disable = syscon_clk_disable, .get_rate = clk_get_rate_i2s_i2c_spi, + .lock = __SPIN_LOCK_UNLOCKED(i2s0_clk.lock), }; static struct clk i2s1_clk = { @@ -970,6 +991,7 @@ static struct clk i2s1_clk = { .enable = syscon_clk_enable, .disable = syscon_clk_disable, .get_rate = clk_get_rate_i2s_i2c_spi, + .lock = __SPIN_LOCK_UNLOCKED(i2s1_clk.lock), }; static struct clk i2c0_clk = { @@ -984,6 +1006,7 @@ static struct clk i2c0_clk = { .enable = syscon_clk_enable, .disable = syscon_clk_disable, .get_rate = clk_get_rate_i2s_i2c_spi, + .lock = __SPIN_LOCK_UNLOCKED(i2c0_clk.lock), }; static struct clk i2c1_clk = { @@ -998,6 +1021,7 @@ static struct clk i2c1_clk = { .enable = syscon_clk_enable, .disable = syscon_clk_disable, .get_rate = clk_get_rate_i2s_i2c_spi, + .lock = __SPIN_LOCK_UNLOCKED(i2c1_clk.lock), }; static struct clk spi_clk = { @@ -1012,6 +1036,7 @@ static struct clk spi_clk = { .enable = syscon_clk_enable, .disable = syscon_clk_disable, .get_rate = clk_get_rate_i2s_i2c_spi, + .lock = __SPIN_LOCK_UNLOCKED(spi_clk.lock), }; #ifdef CONFIG_MACH_U300_BS335 @@ -1026,6 +1051,7 @@ static struct clk uart1_clk = { .clk_val = U300_SYSCON_SBCER_UART1_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(uart1_clk.lock), }; #endif @@ -1044,6 +1070,7 @@ static struct clk slow_clk = { .clk_val = U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(slow_clk.lock), }; /* TODO: implement SYSCON clock? */ @@ -1055,6 +1082,7 @@ static struct clk wdog_clk = { .rate = 32768, .reset = false, /* This is always on, cannot be enabled/disabled or reset */ + .lock = __SPIN_LOCK_UNLOCKED(wdog_clk.lock), }; /* This one is hardwired to PLL13 */ @@ -1069,6 +1097,7 @@ static struct clk uart_clk = { .clk_val = U300_SYSCON_SBCER_UART_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(uart_clk.lock), }; static struct clk keypad_clk = { @@ -1082,6 +1111,7 @@ static struct clk keypad_clk = { .clk_val = U300_SYSCON_SBCER_KEYPAD_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(keypad_clk.lock), }; static struct clk gpio_clk = { @@ -1095,6 +1125,7 @@ static struct clk gpio_clk = { .clk_val = U300_SYSCON_SBCER_GPIO_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(gpio_clk.lock), }; static struct clk rtc_clk = { @@ -1106,6 +1137,7 @@ static struct clk rtc_clk = { .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, .res_mask = U300_SYSCON_RSR_RTC_RESET_EN, /* This clock is always on, cannot be enabled/disabled */ + .lock = __SPIN_LOCK_UNLOCKED(rtc_clk.lock), }; static struct clk bustr_clk = { @@ -1119,6 +1151,7 @@ static struct clk bustr_clk = { .clk_val = U300_SYSCON_SBCER_BTR_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(bustr_clk.lock), }; static struct clk evhist_clk = { @@ -1132,6 +1165,7 @@ static struct clk evhist_clk = { .clk_val = U300_SYSCON_SBCER_EH_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(evhist_clk.lock), }; static struct clk timer_clk = { @@ -1145,6 +1179,7 @@ static struct clk timer_clk = { .clk_val = U300_SYSCON_SBCER_ACC_TMR_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(timer_clk.lock), }; static struct clk app_timer_clk = { @@ -1158,6 +1193,7 @@ static struct clk app_timer_clk = { .clk_val = U300_SYSCON_SBCER_APP_TMR_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(app_timer_clk.lock), }; #ifdef CONFIG_MACH_U300_BS335 @@ -1172,6 +1208,7 @@ static struct clk ppm_clk = { .clk_val = U300_SYSCON_SBCER_PPM_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(ppm_clk.lock), }; #endif @@ -1187,53 +1224,53 @@ static struct clk ppm_clk = { */ static struct clk_lookup lookups[] = { /* Connected directly to the AMBA bus */ - DEF_LOOKUP("amba", &amba_clk), - DEF_LOOKUP("cpu", &cpu_clk), - DEF_LOOKUP("nandif", &nandif_clk), - DEF_LOOKUP("semi", &semi_clk), + DEF_LOOKUP("amba", &amba_clk), + DEF_LOOKUP("cpu", &cpu_clk), + DEF_LOOKUP("fsmc", &nandif_clk), + DEF_LOOKUP("semi", &semi_clk), #ifdef CONFIG_MACH_U300_BS335 - DEF_LOOKUP("isp", &isp_clk), - DEF_LOOKUP("cds", &cds_clk), + DEF_LOOKUP("isp", &isp_clk), + DEF_LOOKUP("cds", &cds_clk), #endif - DEF_LOOKUP("dma", &dma_clk), - DEF_LOOKUP("aaif", &aaif_clk), - DEF_LOOKUP("apex", &apex_clk), + DEF_LOOKUP("dma", &dma_clk), + DEF_LOOKUP("msl", &aaif_clk), + DEF_LOOKUP("apex", &apex_clk), DEF_LOOKUP("video_enc", &video_enc_clk), - DEF_LOOKUP("xgam", &xgam_clk), - DEF_LOOKUP("ahb", &ahb_clk), + DEF_LOOKUP("xgam", &xgam_clk), + DEF_LOOKUP("ahb", &ahb_clk), /* AHB bridge clocks */ - DEF_LOOKUP("ahb", &ahb_subsys_clk), - DEF_LOOKUP("intcon", &intcon_clk), - DEF_LOOKUP("mspro", &mspro_clk), - DEF_LOOKUP("pl172", &emif_clk), + DEF_LOOKUP("ahb_subsys", &ahb_subsys_clk), + DEF_LOOKUP("intcon", &intcon_clk), + DEF_LOOKUP("mspro", &mspro_clk), + DEF_LOOKUP("pl172", &emif_clk), /* FAST bridge clocks */ - DEF_LOOKUP("fast", &fast_clk), - DEF_LOOKUP("mmci", &mmcsd_clk), + DEF_LOOKUP("fast", &fast_clk), + DEF_LOOKUP("mmci", &mmcsd_clk), /* * The .0 and .1 identifiers on these comes from the platform device * .id field and are assigned when the platform devices are registered. */ - DEF_LOOKUP("i2s.0", &i2s0_clk), - DEF_LOOKUP("i2s.1", &i2s1_clk), - DEF_LOOKUP("stddci2c.0", &i2c0_clk), - DEF_LOOKUP("stddci2c.1", &i2c1_clk), - DEF_LOOKUP("pl022", &spi_clk), + DEF_LOOKUP("i2s.0", &i2s0_clk), + DEF_LOOKUP("i2s.1", &i2s1_clk), + DEF_LOOKUP("stu300.0", &i2c0_clk), + DEF_LOOKUP("stu300.1", &i2c1_clk), + DEF_LOOKUP("pl022", &spi_clk), #ifdef CONFIG_MACH_U300_BS335 - DEF_LOOKUP("uart1", &uart1_clk), + DEF_LOOKUP("uart1", &uart1_clk), #endif /* SLOW bridge clocks */ - DEF_LOOKUP("slow", &slow_clk), - DEF_LOOKUP("wdog", &wdog_clk), - DEF_LOOKUP("uart0", &uart_clk), - DEF_LOOKUP("apptimer", &app_timer_clk), - DEF_LOOKUP("keypad", &keypad_clk), + DEF_LOOKUP("slow", &slow_clk), + DEF_LOOKUP("coh901327_wdog", &wdog_clk), + DEF_LOOKUP("uart0", &uart_clk), + DEF_LOOKUP("apptimer", &app_timer_clk), + DEF_LOOKUP("coh901461-keypad", &keypad_clk), DEF_LOOKUP("u300-gpio", &gpio_clk), - DEF_LOOKUP("rtc0", &rtc_clk), - DEF_LOOKUP("bustr", &bustr_clk), - DEF_LOOKUP("evhist", &evhist_clk), - DEF_LOOKUP("timer", &timer_clk), + DEF_LOOKUP("rtc-coh901331", &rtc_clk), + DEF_LOOKUP("bustr", &bustr_clk), + DEF_LOOKUP("evhist", &evhist_clk), + DEF_LOOKUP("timer", &timer_clk), #ifdef CONFIG_MACH_U300_BS335 - DEF_LOOKUP("ppm", &ppm_clk), + DEF_LOOKUP("ppm", &ppm_clk), #endif }; @@ -1427,16 +1464,20 @@ static const struct file_operations u300_clocks_operations = { .release = single_release, }; -static void init_clk_read_procfs(void) +static int __init init_clk_read_debugfs(void) { /* Expose a simple debugfs interface to view all clocks */ (void) debugfs_create_file("u300_clocks", S_IFREG | S_IRUGO, - NULL, NULL, &u300_clocks_operations); -} -#else -static inline void init_clk_read_procfs(void) -{ + NULL, NULL, + &u300_clocks_operations); + return 0; } +/* + * This needs to come in after the core_initcall() for the + * overall clocks, because debugfs is not available until + * the subsystems come up. + */ +module_init(init_clk_read_debugfs); #endif static int __init u300_clock_init(void) @@ -1462,8 +1503,6 @@ static int __init u300_clock_init(void) clk_register(); - init_clk_read_procfs(); - /* * Some of these may be on when we boot the system so make sure they * are turned OFF. -- cgit v1.1 From 1bc6f83813441d15a74dfa97966fb68fa1bdec76 Mon Sep 17 00:00:00 2001 From: Joerg Roedel <joerg.roedel@amd.com> Date: Thu, 2 Jul 2009 18:32:05 +0200 Subject: amd-iommu: set evt_buf_size correctly The setting of this variable got lost during the suspend/resume implementation. But keeping this variable zero causes a divide-by-zero error in the interrupt handler. This patch fixes this. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> --- arch/x86/kernel/amd_iommu_init.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c index ec72c77..c1b17e9 100644 --- a/arch/x86/kernel/amd_iommu_init.c +++ b/arch/x86/kernel/amd_iommu_init.c @@ -472,6 +472,8 @@ static u8 * __init alloc_event_buffer(struct amd_iommu *iommu) if (iommu->evt_buf == NULL) return NULL; + iommu->evt_buf_size = EVT_BUFFER_SIZE; + return iommu->evt_buf; } -- cgit v1.1 From 43644679a1e80f53e6e0155ab75b1093ba3c0365 Mon Sep 17 00:00:00 2001 From: Linus Torvalds <torvalds@linux-foundation.org> Date: Thu, 2 Jul 2009 12:05:10 -0700 Subject: x86: fix power-of-2 round_up/round_down macros These macros had two bugs: - the type of the mask was not correctly expanded to the full size of the argument being expanded, resulting in possible loss of high bits when mixing types. - the alignment argument was evaluated twice, despite the macro looking like a fancy function (but it really does need to be a macro, since it works on arbitrary integer types) Noticed by Peter Anvin, and with a fix that is a modification of his suggestion (bug noticed by Yinghai Lu). Cc: Peter Anvin <hpa@zytor.com> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> --- arch/x86/include/asm/proto.h | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/proto.h b/arch/x86/include/asm/proto.h index 49fb3ec..621f56d 100644 --- a/arch/x86/include/asm/proto.h +++ b/arch/x86/include/asm/proto.h @@ -22,7 +22,14 @@ extern int reboot_force; long do_arch_prctl(struct task_struct *task, int code, unsigned long addr); -#define round_up(x, y) (((x) + (y) - 1) & ~((y) - 1)) -#define round_down(x, y) ((x) & ~((y) - 1)) +/* + * This looks more complex than it should be. But we need to + * get the type for the ~ right in round_down (it needs to be + * as wide as the result!), and we want to evaluate the macro + * arguments just once each. + */ +#define __round_mask(x,y) ((__typeof__(x))((y)-1)) +#define round_up(x,y) ((((x)-1) | __round_mask(x,y))+1) +#define round_down(x,y) ((x) & ~__round_mask(x,y)) #endif /* _ASM_X86_PROTO_H */ -- cgit v1.1 From 7c5371c403abb29f01bc6cff6c5096abdf2dc524 Mon Sep 17 00:00:00 2001 From: Yinghai Lu <yinghai@kernel.org> Date: Wed, 1 Jul 2009 12:32:18 -0700 Subject: x86: add boundary check for 32bit res before expand e820 resource to alignment fix hang with HIGHMEM_64G and 32bit resource. According to hpa and Linus, use (resource_size_t)-1 to fend off big ranges. Analyzed by hpa Reported-and-tested-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> --- arch/x86/kernel/e820.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index 7271fa3..c4ca89d 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -1383,6 +1383,8 @@ static unsigned long ram_alignment(resource_size_t pos) return 32*1024*1024; } +#define MAX_RESOURCE_SIZE ((resource_size_t)-1) + void __init e820_reserve_resources_late(void) { int i; @@ -1400,17 +1402,19 @@ void __init e820_reserve_resources_late(void) * avoid stolen RAM: */ for (i = 0; i < e820.nr_map; i++) { - struct e820entry *entry = &e820_saved.map[i]; - resource_size_t start, end; + struct e820entry *entry = &e820.map[i]; + u64 start, end; if (entry->type != E820_RAM) continue; start = entry->addr + entry->size; - end = round_up(start, ram_alignment(start)); - if (start == end) + end = round_up(start, ram_alignment(start)) - 1; + if (end > MAX_RESOURCE_SIZE) + end = MAX_RESOURCE_SIZE; + if (start >= end) continue; - reserve_region_with_split(&iomem_resource, start, - end - 1, "RAM buffer"); + reserve_region_with_split(&iomem_resource, start, end, + "RAM buffer"); } } -- cgit v1.1 From 66d9e2102af038bcd3286a6efce83e1877e5997b Mon Sep 17 00:00:00 2001 From: Matthias Kaehlcke <matthias@kaehlcke.net> Date: Sun, 28 Jun 2009 11:19:39 +0100 Subject: [ARM] 5576/1: Update kb9202_defconfig The default configuration file for the KwikByte kb9202 board was based on a 2.6.13-rc2 kernel and doesn't produce a bootable kernel. Update the configuration in order to produce a bootable image. Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> --- arch/arm/configs/kb9202_defconfig | 1158 +++++++++++++++++++++++++++---------- 1 file changed, 842 insertions(+), 316 deletions(-) (limited to 'arch') diff --git a/arch/arm/configs/kb9202_defconfig b/arch/arm/configs/kb9202_defconfig index 8e74c66..605a846 100644 --- a/arch/arm/configs/kb9202_defconfig +++ b/arch/arm/configs/kb9202_defconfig @@ -1,109 +1,246 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13-rc2 -# Sun Aug 14 19:26:59 2005 +# Linux kernel version: 2.6.30-rc8 +# Wed Jun 3 13:52:33 2009 # CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_MMU=y -CONFIG_UID16=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # -# CONFIG_EXPERIMENTAL is not set -CONFIG_CLEAN_COMPILE=y +CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y # CONFIG_SWAP is not set -# CONFIG_SYSVIPC is not set -# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +CONFIG_AUDIT=y + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -# CONFIG_KOBJECT_UEVENT is not set -# CONFIG_IKCONFIG is not set +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_KALLSYMS_EXTRA_PASS=y +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_TRACEPOINTS=y +CONFIG_MARKERS=y +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # -# Loadable module support +# IO Schedulers # -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_FREEZER is not set # # System Type # -# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +CONFIG_ARCH_AT91=y # CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_IOP3XX is not set -# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set # CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_AAEC2000 is not set -CONFIG_ARCH_AT91=y +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set + +# +# Atmel AT91 System-on-Chip +# CONFIG_ARCH_AT91RM9200=y +# CONFIG_ARCH_AT91SAM9260 is not set +# CONFIG_ARCH_AT91SAM9261 is not set +# CONFIG_ARCH_AT91SAM9263 is not set +# CONFIG_ARCH_AT91SAM9RL is not set +# CONFIG_ARCH_AT91SAM9G20 is not set +# CONFIG_ARCH_AT91CAP9 is not set +# CONFIG_ARCH_AT91X40 is not set +CONFIG_AT91_PMC_UNIT=y # -# AT91RM9200 Implementations +# AT91RM9200 Board Type # +# CONFIG_MACH_ONEARM is not set # CONFIG_ARCH_AT91RM9200DK is not set # CONFIG_MACH_AT91RM9200EK is not set # CONFIG_MACH_CSB337 is not set # CONFIG_MACH_CSB637 is not set # CONFIG_MACH_CARMEVA is not set +# CONFIG_MACH_ATEB9200 is not set CONFIG_MACH_KB9200=y +# CONFIG_MACH_PICOTUX2XX is not set +# CONFIG_MACH_KAFA is not set +# CONFIG_MACH_ECBAT91 is not set +# CONFIG_MACH_YL9200 is not set + +# +# AT91 Board Options +# + +# +# AT91 Feature Selections +# +CONFIG_AT91_PROGRAMMABLE_CLOCKS=y +CONFIG_AT91_TIMER_HZ=128 +CONFIG_AT91_EARLY_DBGU=y +# CONFIG_AT91_EARLY_USART0 is not set +# CONFIG_AT91_EARLY_USART1 is not set +# CONFIG_AT91_EARLY_USART2 is not set +# CONFIG_AT91_EARLY_USART3 is not set +# CONFIG_AT91_EARLY_USART4 is not set +# CONFIG_AT91_EARLY_USART5 is not set # # Processor Type # CONFIG_CPU_32=y CONFIG_CPU_ARM920T=y -CONFIG_CPU_32v4=y +CONFIG_CPU_32v4T=y CONFIG_CPU_ABRT_EV4T=y +CONFIG_CPU_PABRT_NOIFAR=y CONFIG_CPU_CACHE_V4WT=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_COPY_V4WB=y CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y # # Processor Features @@ -112,23 +249,48 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_ICACHE_DISABLE is not set # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_OUTER_CACHE is not set # # Bus support # -CONFIG_ISA_DMA_API=y - -# -# PCCARD (PCMCIA/CardBus) support -# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set # # Kernel Features # -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT=y +CONFIG_HZ=128 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_LEDS is not set CONFIG_ALIGNMENT_TRAP=y @@ -137,8 +299,16 @@ CONFIG_ALIGNMENT_TRAP=y # CONFIG_ZBOOT_ROM_TEXT=0x10000000 CONFIG_ZBOOT_ROM_BSS=0x20040000 -CONFIG_ZBOOT_ROM=y -CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram rw initrd=0x20210000,654933" +# CONFIG_ZBOOT_ROM is not set +CONFIG_CMDLINE="noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M" +# CONFIG_XIP_KERNEL is not set +CONFIG_KEXEC=y +CONFIG_ATAGS_PROC=y + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set # # Floating point emulation @@ -149,74 +319,251 @@ CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram rw initrd=0x20210000,654933" # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats # CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_AOUT=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set CONFIG_BINFMT_MISC=y -# CONFIG_ARTHUR is not set # # Power management options # # CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y # -# Device Drivers +# Networking options # +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # -# Generic Driver Options +# Network testing # -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set -CONFIG_DEBUG_DRIVER=y +# CONFIG_NET_PKTGEN is not set +# CONFIG_NET_DROP_MONITOR is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # -# Memory Technology Devices (MTD) +# Device Drivers # -# CONFIG_MTD is not set # -# Parallel port support +# Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +CONFIG_MTD_NAND_ATMEL=y +# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set +CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y +# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_RESERVE=1 +CONFIG_MTD_UBI_GLUEBI=y + +# +# UBI debugging options +# +# CONFIG_MTD_UBI_DEBUG is not set # CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set -CONFIG_BLK_DEV_NBD=y +# CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +CONFIG_ATMEL_TCLIB=y +CONFIG_ATMEL_TCB_CLKSRC=y +CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0 +CONFIG_ATMEL_SSC=y +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set # -# IO Schedulers +# EEPROM support # -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set # # SCSI device support # +# CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y # @@ -232,145 +579,87 @@ CONFIG_CHR_DEV_SG=y # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_CONSTANTS=y +CONFIG_SCSI_LOGGING=y +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # -# SCSI Transport Attributes +# SCSI Transports # -# CONFIG_SCSI_SPI_ATTRS is not set +CONFIG_SCSI_SPI_ATTRS=m # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_DEBUG is not set - -# -# Multi-device support (RAID and LVM) -# +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_IP_TCPDIAG is not set -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# Ethernet (10 or 100Mbit) -# +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_ARM_AT91_ETHER=y +# CONFIG_AX88796 is not set # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # -# Wireless LAN (non-hamradio) +# Enable WiMAX (Networking options) to see the WiMAX drivers # -# CONFIG_NET_RADIO is not set # -# Wan interfaces +# USB Network Adapters # +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set - -# -# ISDN subsystem -# +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_ISDN is not set # # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -380,7 +669,6 @@ CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -390,23 +678,25 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Hardware I/O ports # -CONFIG_SERIO=y -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_RAW is not set +# CONFIG_SERIO is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -419,215 +709,362 @@ CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y +CONFIG_SERIAL_ATMEL_PDC=y +# CONFIG_SERIAL_ATMEL_TTYAT is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set # -# IPMI +# Memory mapped GPIO expanders: # -# CONFIG_IPMI_HANDLER is not set # -# Watchdog Cards +# I2C GPIO expanders: # -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -# CONFIG_RTC is not set -# CONFIG_AT91RM9200_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set # -# Ftape, the floppy tape device driver +# PCI GPIO expanders: # -# CONFIG_RAW_DRIVER is not set # -# TPM devices +# SPI GPIO expanders: # -# CONFIG_AT91_SPI is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set # -# I2C support +# Watchdog Device Drivers # -# CONFIG_I2C is not set +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_AT91RM9200_WATCHDOG=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # -# Misc devices +# Sonics Silicon Backplane # +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set # -# Digital Video Broadcasting Devices +# Multimedia drivers # -# CONFIG_DVB is not set +# CONFIG_DAB is not set # # Graphics support # -# CONFIG_FB is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_GENERIC is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y - -# -# Sound -# +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +# CONFIG_FONT_8x8 is not set +# CONFIG_FONT_8x16 is not set +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +CONFIG_FONT_MINI_4x6=y +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +# CONFIG_LOGO is not set # CONFIG_SOUND is not set - -# -# USB support -# +# CONFIG_HID_SUPPORT is not set +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set CONFIG_USB=y -CONFIG_USB_DEBUG=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set # # USB Device Class drivers # -# CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # -CONFIG_USB_STORAGE=y -CONFIG_USB_STORAGE_DEBUG=y -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_DPCM is not set - -# -# USB Input Devices -# -# CONFIG_USB_HID is not set # -# USB HID Boot Protocol drivers +# also be needed; see USB_STORAGE Help for more info # -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_ITMTOUCH is not set -# CONFIG_USB_EGALAX is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +CONFIG_USB_LIBUSUAL=y # # USB Imaging devices # +# CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set # -# USB Multimedia devices +# USB port drivers # -# CONFIG_USB_DABUSB is not set +# CONFIG_USB_SERIAL is not set # -# Video4Linux support is needed for USB Multimedia device support +# USB Miscellaneous drivers # +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set # -# USB Network Adapters +# OTG and related infrastructure # -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_USBNET is not set -# CONFIG_USB_MON is not set +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set # -# USB port drivers +# MMC/SD/SDIO Card Drivers # +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set # -# USB Serial Converter support +# MMC/SD/SDIO Host Controller Drivers # -# CONFIG_USB_SERIAL is not set +# CONFIG_MMC_SDHCI is not set +CONFIG_MMC_AT91=y +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set # -# USB Miscellaneous drivers +# RTC interfaces # -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGETKIT is not set -# CONFIG_USB_PHIDGETSERVO is not set -# CONFIG_USB_IDMOUSE is not set +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# USB DSL modem support +# SPI RTC drivers # # -# USB Gadget Support +# Platform RTC drivers # -# CONFIG_USB_GADGET is not set +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set # -# MMC/SD Card support +# on-CPU RTC drivers # -# CONFIG_MMC is not set +CONFIG_RTC_DRV_AT91RM9200=y +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_REGULATOR is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems # CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -# CONFIG_EXT2_FS_POSIX_ACL is not set -# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_DNOTIFY is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # -# XFS support +# Caches # -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -CONFIG_AUTOFS_FS=y -CONFIG_AUTOFS4_FS=y +# CONFIG_FSCACHE is not set # # CD-ROM/DVD Filesystems @@ -639,7 +1076,7 @@ CONFIG_AUTOFS4_FS=y # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=y +# CONFIG_MSDOS_FS is not set CONFIG_VFAT_FS=y CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" @@ -649,53 +1086,70 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # Pseudo filesystems # CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y -CONFIG_DEVPTS_FS_XATTR=y -# CONFIG_DEVPTS_FS_SECURITY is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# +CONFIG_CONFIGFS_FS=y +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_UBIFS_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +# CONFIG_NILFS2_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set -# CONFIG_NFSD is not set +# CONFIG_NFS_V4 is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=y -CONFIG_NLS_DEFAULT="utf8" +CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set @@ -719,7 +1173,7 @@ CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set -CONFIG_NLS_ASCII=y +# CONFIG_NLS_ASCII is not set # CONFIG_NLS_ISO8859_1 is not set # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set @@ -733,47 +1187,119 @@ CONFIG_NLS_ASCII=y # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y -# CONFIG_MAGIC_SYSRQ is not set -CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +# CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_PREEMPT is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_FS is not set -CONFIG_FRAME_POINTER=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y -CONFIG_DEBUG_LL=y -# CONFIG_DEBUG_ICEDCC is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set - -# -# Hardware crypto devices -# +# CONFIG_BINARY_PRINTF is not set # # Library routines # +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set +CONFIG_AUDIT_GENERIC=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y -- cgit v1.1 From 90eab5e09de20e8d991bbb11f6edfb573f906352 Mon Sep 17 00:00:00 2001 From: Kyle McMartin <kyle@mcmartin.ca> Date: Mon, 27 Apr 2009 08:29:12 -0400 Subject: parisc: wire up preadv/pwritev syscalls Generic compat handlers look appropriate, so use those. Signed-off-by: Kyle McMartin <kyle@mcmartin.ca> --- arch/parisc/include/asm/unistd.h | 4 +++- arch/parisc/kernel/syscall_table.S | 2 ++ 2 files changed, 5 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/parisc/include/asm/unistd.h b/arch/parisc/include/asm/unistd.h index ef26b00..a3c3419 100644 --- a/arch/parisc/include/asm/unistd.h +++ b/arch/parisc/include/asm/unistd.h @@ -807,8 +807,10 @@ #define __NR_dup3 (__NR_Linux + 312) #define __NR_pipe2 (__NR_Linux + 313) #define __NR_inotify_init1 (__NR_Linux + 314) +#define __NR_preadv (__NR_Linux + 315) +#define __NR_pwritev (__NR_Linux + 316) -#define __NR_Linux_syscalls (__NR_inotify_init1 + 1) +#define __NR_Linux_syscalls (__NR_pwritev + 1) #define __IGNORE_select /* newselect */ diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S index 03b9a01..6a62961 100644 --- a/arch/parisc/kernel/syscall_table.S +++ b/arch/parisc/kernel/syscall_table.S @@ -413,6 +413,8 @@ ENTRY_SAME(dup3) ENTRY_SAME(pipe2) ENTRY_SAME(inotify_init1) + ENTRY_COMP(preadv) + ENTRY_COMP(pwritev) /* Nothing yet */ -- cgit v1.1 From 071327ec9005e9a826d088d37021ed2c88e683f7 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov <a.beregalov@gmail.com> Date: Fri, 3 Apr 2009 01:49:22 +0000 Subject: parisc: remove CVS keywords Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Acked-by: Matthew Wilcox <willy@linux.intel.com> Acked-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca> --- arch/parisc/include/asm/dma.h | 3 +-- arch/parisc/kernel/cache.c | 3 +-- arch/parisc/kernel/pci.c | 3 +-- arch/parisc/kernel/processor.c | 3 +-- arch/parisc/kernel/setup.c | 3 +-- arch/parisc/lib/checksum.c | 2 -- arch/parisc/mm/fault.c | 3 +-- 7 files changed, 6 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/parisc/include/asm/dma.h b/arch/parisc/include/asm/dma.h index 31ad0f0..f7a18f9 100644 --- a/arch/parisc/include/asm/dma.h +++ b/arch/parisc/include/asm/dma.h @@ -1,5 +1,4 @@ -/* $Id: dma.h,v 1.2 1999/04/27 00:46:18 deller Exp $ - * linux/include/asm/dma.h: Defines for using and allocating dma channels. +/* asm/dma.h: Defines for using and allocating dma channels. * Written by Hennus Bergman, 1992. * High DMA channel support & info by Hannu Savolainen * and John Boyd, Nov. 1992. diff --git a/arch/parisc/kernel/cache.c b/arch/parisc/kernel/cache.c index 837530e..f34082d 100644 --- a/arch/parisc/kernel/cache.c +++ b/arch/parisc/kernel/cache.c @@ -1,5 +1,4 @@ -/* $Id: cache.c,v 1.4 2000/01/25 00:11:38 prumpf Exp $ - * +/* * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. diff --git a/arch/parisc/kernel/pci.c b/arch/parisc/kernel/pci.c index 6936386..f7064ab 100644 --- a/arch/parisc/kernel/pci.c +++ b/arch/parisc/kernel/pci.c @@ -1,5 +1,4 @@ -/* $Id: pci.c,v 1.6 2000/01/29 00:12:05 grundler Exp $ - * +/* * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. diff --git a/arch/parisc/kernel/processor.c b/arch/parisc/kernel/processor.c index e09d0f7..1ca69a8 100644 --- a/arch/parisc/kernel/processor.c +++ b/arch/parisc/kernel/processor.c @@ -1,5 +1,4 @@ -/* $Id: processor.c,v 1.1 2002/07/20 16:27:06 rhirst Exp $ - * +/* * Initial setup-routines for HP 9000 based hardware. * * Copyright (C) 1991, 1992, 1995 Linus Torvalds diff --git a/arch/parisc/kernel/setup.c b/arch/parisc/kernel/setup.c index 82131ca..cb71f3d 100644 --- a/arch/parisc/kernel/setup.c +++ b/arch/parisc/kernel/setup.c @@ -1,5 +1,4 @@ -/* $Id: setup.c,v 1.8 2000/02/02 04:42:38 prumpf Exp $ - * +/* * Initial setup-routines for HP 9000 based hardware. * * Copyright (C) 1991, 1992, 1995 Linus Torvalds diff --git a/arch/parisc/lib/checksum.c b/arch/parisc/lib/checksum.c index 462696d..ae66d31 100644 --- a/arch/parisc/lib/checksum.c +++ b/arch/parisc/lib/checksum.c @@ -13,8 +13,6 @@ * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. - * - * $Id: checksum.c,v 1.3 1997/12/01 17:57:34 ralf Exp $ */ #include <linux/module.h> #include <linux/types.h> diff --git a/arch/parisc/mm/fault.c b/arch/parisc/mm/fault.c index bfb6dd6..c6afbfc 100644 --- a/arch/parisc/mm/fault.c +++ b/arch/parisc/mm/fault.c @@ -1,5 +1,4 @@ -/* $Id: fault.c,v 1.5 2000/01/26 16:20:29 jsm Exp $ - * +/* * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. -- cgit v1.1 From 692c14a5931341a37e4fbfca5fa96751187a108f Mon Sep 17 00:00:00 2001 From: Bastian Blank <waldi@debian.org> Date: Sat, 4 Apr 2009 20:54:26 +0000 Subject: parisc: Remove casts from atomic macros The atomic operations on parisc are defined as macros. The macros includes casts which disallows the use of some syntax elements and produces error like this: net/phonet/pep.c: In function 'pipe_rcv_status': net/phonet/pep.c:262: error: lvalue required as left operand of assignment The patch removes this superfluous casts. Signed-off-by: Bastian Blank <waldi@debian.org> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca> --- arch/parisc/include/asm/atomic.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/parisc/include/asm/atomic.h b/arch/parisc/include/asm/atomic.h index 7eeaff9..82e9688 100644 --- a/arch/parisc/include/asm/atomic.h +++ b/arch/parisc/include/asm/atomic.h @@ -222,13 +222,13 @@ static __inline__ int atomic_add_unless(atomic_t *v, int a, int u) #define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) -#define atomic_add(i,v) ((void)(__atomic_add_return( ((int)(i)),(v)))) -#define atomic_sub(i,v) ((void)(__atomic_add_return(-((int)(i)),(v)))) +#define atomic_add(i,v) ((void)(__atomic_add_return( (i),(v)))) +#define atomic_sub(i,v) ((void)(__atomic_add_return(-(i),(v)))) #define atomic_inc(v) ((void)(__atomic_add_return( 1,(v)))) #define atomic_dec(v) ((void)(__atomic_add_return( -1,(v)))) -#define atomic_add_return(i,v) (__atomic_add_return( ((int)(i)),(v))) -#define atomic_sub_return(i,v) (__atomic_add_return(-((int)(i)),(v))) +#define atomic_add_return(i,v) (__atomic_add_return( (i),(v))) +#define atomic_sub_return(i,v) (__atomic_add_return(-(i),(v))) #define atomic_inc_return(v) (__atomic_add_return( 1,(v))) #define atomic_dec_return(v) (__atomic_add_return( -1,(v))) -- cgit v1.1 From 4fb11781a044552dded5342e1a78cf92a74683db Mon Sep 17 00:00:00 2001 From: Kyle McMartin <kyle@mcmartin.ca> Date: Sun, 5 Apr 2009 02:53:47 +0000 Subject: parisc: kill WARN in free_initmem when DEBUG_KERNEL Doing an IPI with local interrupts off triggers a warning. We don't need to be quite so ridiculously paranoid. Also, clean up a bit of the code a little. Signed-off-by: Kyle McMartin <kyle@mcmartin.ca> --- arch/parisc/mm/init.c | 29 +++++++++-------------------- 1 file changed, 9 insertions(+), 20 deletions(-) (limited to 'arch') diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c index 4356ceb..6c5ea96 100644 --- a/arch/parisc/mm/init.c +++ b/arch/parisc/mm/init.c @@ -370,34 +370,22 @@ static void __init setup_bootmem(void) void free_initmem(void) { - unsigned long addr, init_begin, init_end; - - printk(KERN_INFO "Freeing unused kernel memory: "); + unsigned long addr; + unsigned long init_begin = (unsigned long)__init_begin; + unsigned long init_end = (unsigned long)__init_end; #ifdef CONFIG_DEBUG_KERNEL /* Attempt to catch anyone trying to execute code here * by filling the page with BRK insns. - * - * If we disable interrupts for all CPUs, then IPI stops working. - * Kinda breaks the global cache flushing. */ - local_irq_disable(); - - memset(__init_begin, 0x00, - (unsigned long)__init_end - (unsigned long)__init_begin); - - flush_data_cache(); - asm volatile("sync" : : ); - flush_icache_range((unsigned long)__init_begin, (unsigned long)__init_end); - asm volatile("sync" : : ); - - local_irq_enable(); + memset(init_begin, 0x00, init_end - init_begin); + flush_icache_range(init_begin, init_end); #endif /* align __init_begin and __init_end to page size, ignoring linker script where we might have tried to save RAM */ - init_begin = PAGE_ALIGN((unsigned long)(__init_begin)); - init_end = PAGE_ALIGN((unsigned long)(__init_end)); + init_begin = PAGE_ALIGN(init_begin); + init_end = PAGE_ALIGN(init_end); for (addr = init_begin; addr < init_end; addr += PAGE_SIZE) { ClearPageReserved(virt_to_page(addr)); init_page_count(virt_to_page(addr)); @@ -409,7 +397,8 @@ void free_initmem(void) /* set up a new led state on systems shipped LED State panel */ pdc_chassis_send_status(PDC_CHASSIS_DIRECT_BCOMPLETE); - printk("%luk freed\n", (init_end - init_begin) >> 10); + printk(KERN_INFO "Freeing unused kernel memory: %luk freed\n", + (init_end - init_begin) >> 10); } -- cgit v1.1 From 7d17e2763129ea307702fcdc91f6e9d114b65c2d Mon Sep 17 00:00:00 2001 From: Helge Deller <deller@gmx.de> Date: Thu, 30 Apr 2009 21:39:45 +0000 Subject: parisc: fix ldcw inline assembler There are two reasons to expose the memory *a in the asm: 1) To prevent the compiler from discarding a preceeding write to *a, and 2) to prevent it from caching *a in a register over the asm. The change has had a few days testing with a SMP build of 2.6.22.19 running on a rp3440. This patch is about the correctness of the __ldcw() macro itself. The use of the macro should be confined to small inline functions to try to limit the effect of clobbering memory on GCC's optimization of loads and stores. Signed-off-by: Dave Anglin <dave.anglin@nrc-cnrc.gc.ca> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca> --- arch/parisc/include/asm/system.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/parisc/include/asm/system.h b/arch/parisc/include/asm/system.h index ee80c92..d91357b 100644 --- a/arch/parisc/include/asm/system.h +++ b/arch/parisc/include/asm/system.h @@ -168,8 +168,8 @@ static inline void set_eiem(unsigned long val) /* LDCW, the only atomic read-write operation PA-RISC has. *sigh*. */ #define __ldcw(a) ({ \ unsigned __ret; \ - __asm__ __volatile__(__LDCW " 0(%1),%0" \ - : "=r" (__ret) : "r" (a)); \ + __asm__ __volatile__(__LDCW " 0(%2),%0" \ + : "=r" (__ret), "+m" (*(a)) : "r" (a)); \ __ret; \ }) -- cgit v1.1 From 47b4150baa003fb83b93365f3eadd4c373e4fa6c Mon Sep 17 00:00:00 2001 From: Helge Deller <deller@gmx.de> Date: Sat, 6 Jun 2009 21:54:28 +0000 Subject: parisc: fix irq compile bugs in arch/parisc/kernel/irq.c Fix miscompilation in arch/parisc/kernel/irq.c: 123: warning: passing arg 1 of `cpumask_setall' from incompatible pointer type 141: warning: passing arg 1 of `cpumask_copy' from incompatible pointer type 300: warning: passing arg 1 of `cpumask_copy' from incompatible pointer type 357: warning: passing arg 2 of `cpumask_copy' from incompatible pointer type Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca> --- arch/parisc/kernel/irq.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c index 8007f1e..639451c 100644 --- a/arch/parisc/kernel/irq.c +++ b/arch/parisc/kernel/irq.c @@ -120,7 +120,7 @@ int cpu_check_affinity(unsigned int irq, const struct cpumask *dest) if (CHECK_IRQ_PER_CPU(irq)) { /* Bad linux design decision. The mask has already * been set; we must reset it */ - cpumask_setall(&irq_desc[irq].affinity); + cpumask_setall(irq_desc[irq].affinity); return -EINVAL; } @@ -138,7 +138,7 @@ static int cpu_set_affinity_irq(unsigned int irq, const struct cpumask *dest) if (cpu_dest < 0) return -1; - cpumask_copy(&irq_desc[irq].affinity, dest); + cpumask_copy(irq_desc[irq].affinity, dest); return 0; } @@ -299,7 +299,7 @@ int txn_alloc_irq(unsigned int bits_wide) unsigned long txn_affinity_addr(unsigned int irq, int cpu) { #ifdef CONFIG_SMP - cpumask_copy(&irq_desc[irq].affinity, cpumask_of(cpu)); + cpumask_copy(irq_desc[irq].affinity, cpumask_of(cpu)); #endif return per_cpu(cpu_data, cpu).txn_addr; @@ -356,7 +356,7 @@ void do_cpu_irq_mask(struct pt_regs *regs) irq = eirr_to_irq(eirr_val); #ifdef CONFIG_SMP - cpumask_copy(&dest, &irq_desc[irq].affinity); + cpumask_copy(&dest, irq_desc[irq].affinity); if (CHECK_IRQ_PER_CPU(irq_desc[irq].status) && !cpu_isset(smp_processor_id(), dest)) { int cpu = first_cpu(dest); -- cgit v1.1 From dfe07565021959f0f646e9e775810c1bfbe0f6d6 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner <tglx@linutronix.de> Date: Wed, 10 Jun 2009 19:56:04 +0000 Subject: parisc: remove obsolete hw_interrupt_type The defines and typedefs (hw_interrupt_type, no_irq_type, irq_desc_t) have been kept around for migration reasons. After more than two years it's time to remove them finally. This patch cleans up one of the remaining users. When all such patches hit mainline we can remove the defines and typedefs finally. Impact: cleanup Convert the last remaining users to struct irq_chip and remove the define. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca> --- arch/parisc/kernel/irq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c index 639451c..330f536 100644 --- a/arch/parisc/kernel/irq.c +++ b/arch/parisc/kernel/irq.c @@ -144,7 +144,7 @@ static int cpu_set_affinity_irq(unsigned int irq, const struct cpumask *dest) } #endif -static struct hw_interrupt_type cpu_interrupt_type = { +static struct irq_chip cpu_interrupt_type = { .typename = "CPU", .startup = cpu_startup_irq, .shutdown = cpu_disable_irq, -- cgit v1.1 From e9b2601073aa57ffde7259afbe86f405060058e3 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov <a.beregalov@gmail.com> Date: Mon, 6 Apr 2009 09:29:58 +0000 Subject: parisc: decode_exc.c should include kernel.h Fix this build error: arch/parisc/math-emu/decode_exc.c:351: undefined reference to `printk' Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca> --- arch/parisc/math-emu/decode_exc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/parisc/math-emu/decode_exc.c b/arch/parisc/math-emu/decode_exc.c index 66c8a9f..3ca1c61 100644 --- a/arch/parisc/math-emu/decode_exc.c +++ b/arch/parisc/math-emu/decode_exc.c @@ -40,7 +40,7 @@ * END_DESC */ - +#include <linux/kernel.h> #include "float.h" #include "sgl_float.h" #include "dbl_float.h" -- cgit v1.1 From ebc30a0f67a4d6a9470556f4311478b3b04c2b1f Mon Sep 17 00:00:00 2001 From: Coly Li <coly.li@suse.de> Date: Thu, 30 Apr 2009 22:43:46 +0000 Subject: parisc: add parameter to read_cr16() This patch modifies parameter of au1x_counter1_read() from 'void' to 'struct clocksource *cs', which fixes compile warning for incompatible parameter type. Signed-off-by: Coly Li <coly.li@suse.de> Signed-off-by: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca> --- arch/parisc/kernel/time.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/parisc/kernel/time.c b/arch/parisc/kernel/time.c index d4dd056..d97d07f 100644 --- a/arch/parisc/kernel/time.c +++ b/arch/parisc/kernel/time.c @@ -173,7 +173,7 @@ EXPORT_SYMBOL(profile_pc); /* clock source code */ -static cycle_t read_cr16(void) +static cycle_t read_cr16(struct clocksource *cs) { return get_cycles(); } -- cgit v1.1 From 87451d850c895470a122308086069b7c326c914b Mon Sep 17 00:00:00 2001 From: Randolph Chung <randolph@tausq.org> Date: Tue, 23 Jun 2009 14:53:26 +0000 Subject: parisc: fix mismatched parenthesis in memcpy.c >>>> I think this is what was intended? Note that this patch may affect >>>> profiling. >>> it really should be >>> >>> - if (likely(t1 & (sizeof(unsigned int)-1)) == 0) { >>> + if (likely((t1 & (sizeof(unsigned int)-1)) == 0)) { >>> >>> randolph Reported-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Randolph Chung <tausq@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca> --- arch/parisc/lib/memcpy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/parisc/lib/memcpy.c b/arch/parisc/lib/memcpy.c index bbda909..abf41f4 100644 --- a/arch/parisc/lib/memcpy.c +++ b/arch/parisc/lib/memcpy.c @@ -405,7 +405,7 @@ byte_copy: unaligned_copy: /* possibly we are aligned on a word, but not on a double... */ - if (likely(t1 & (sizeof(unsigned int)-1)) == 0) { + if (likely((t1 & (sizeof(unsigned int)-1)) == 0)) { t2 = src & (sizeof(unsigned int) - 1); if (unlikely(t2 != 0)) { -- cgit v1.1 From 84be31be3727d11b2a91781306b642e801c5a379 Mon Sep 17 00:00:00 2001 From: Grant Grundler <grundler@parisc-linux.org> Date: Mon, 1 Jun 2009 00:20:23 +0000 Subject: parisc: fix "delay!" timer handling Rewrote timer_interrupt() to properly handle the "delayed!" case. If we used floating point math to compute the number of ticks that had elapsed since the last timer interrupt, it could take up to 12K cycles (emperical!) to handle the interrupt. Existing code assumed it would never take more than 8k cycles. We end up programming Interval Timer to a value less than "current" cycle counter. Thus have to wait until Interval Timer "wrapped" and would then get the "delayed!" printk that I moved below. Since we don't really know what the upper limit is, I prefer to read CR16 again after we've programmed it to make sure we won't have to wait for CR16 to wrap. Further, the printk was between reading CR16 (cycle couner) and writing CR16 (the interval timer). This would cause us to continue to set the interval timer to a value that was "behind" the cycle counter. Rinse and repeat. So no printk's between reading CR16 and setting next interval timer. Tested on A500 (550 Mhz PA8600). Signed-off-by: Grant Grundler <grundler@parisc-linux.org> Tested-by: Kyle McMartin <kyle@mcmartin.ca> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca> ---- Kyle, Helge, and other parisc's, Please test on 32-bit before committing. I think I have it right but recognize I might not. TODO: I wanted to use "do_div()" in order to get both remainder and value back with one division op. That should help with the latency alot but can be applied seperately from this patch. thanks, grant --- arch/parisc/kernel/time.c | 88 ++++++++++++++++++++++++++++------------------- 1 file changed, 53 insertions(+), 35 deletions(-) (limited to 'arch') diff --git a/arch/parisc/kernel/time.c b/arch/parisc/kernel/time.c index d97d07f..a79c6f9 100644 --- a/arch/parisc/kernel/time.c +++ b/arch/parisc/kernel/time.c @@ -56,9 +56,9 @@ static unsigned long clocktick __read_mostly; /* timer cycles per tick */ */ irqreturn_t __irq_entry timer_interrupt(int irq, void *dev_id) { - unsigned long now; + unsigned long now, now2; unsigned long next_tick; - unsigned long cycles_elapsed, ticks_elapsed; + unsigned long cycles_elapsed, ticks_elapsed = 1; unsigned long cycles_remainder; unsigned int cpu = smp_processor_id(); struct cpuinfo_parisc *cpuinfo = &per_cpu(cpu_data, cpu); @@ -71,44 +71,24 @@ irqreturn_t __irq_entry timer_interrupt(int irq, void *dev_id) /* Initialize next_tick to the expected tick time. */ next_tick = cpuinfo->it_value; - /* Get current interval timer. - * CR16 reads as 64 bits in CPU wide mode. - * CR16 reads as 32 bits in CPU narrow mode. - */ + /* Get current cycle counter (Control Register 16). */ now = mfctl(16); cycles_elapsed = now - next_tick; - if ((cycles_elapsed >> 5) < cpt) { + if ((cycles_elapsed >> 6) < cpt) { /* use "cheap" math (add/subtract) instead * of the more expensive div/mul method */ cycles_remainder = cycles_elapsed; - ticks_elapsed = 1; while (cycles_remainder > cpt) { cycles_remainder -= cpt; ticks_elapsed++; } } else { + /* TODO: Reduce this to one fdiv op */ cycles_remainder = cycles_elapsed % cpt; - ticks_elapsed = 1 + cycles_elapsed / cpt; - } - - /* Can we differentiate between "early CR16" (aka Scenario 1) and - * "long delay" (aka Scenario 3)? I don't think so. - * - * We expected timer_interrupt to be delivered at least a few hundred - * cycles after the IT fires. But it's arbitrary how much time passes - * before we call it "late". I've picked one second. - */ - if (unlikely(ticks_elapsed > HZ)) { - /* Scenario 3: very long delay? bad in any case */ - printk (KERN_CRIT "timer_interrupt(CPU %d): delayed!" - " cycles %lX rem %lX " - " next/now %lX/%lX\n", - cpu, - cycles_elapsed, cycles_remainder, - next_tick, now ); + ticks_elapsed += cycles_elapsed / cpt; } /* convert from "division remainder" to "remainder of clock tick" */ @@ -122,18 +102,56 @@ irqreturn_t __irq_entry timer_interrupt(int irq, void *dev_id) cpuinfo->it_value = next_tick; - /* Skip one clocktick on purpose if we are likely to miss next_tick. - * We want to avoid the new next_tick being less than CR16. - * If that happened, itimer wouldn't fire until CR16 wrapped. - * We'll catch the tick we missed on the tick after that. + /* Program the IT when to deliver the next interrupt. + * Only bottom 32-bits of next_tick are writable in CR16! */ - if (!(cycles_remainder >> 13)) - next_tick += cpt; - - /* Program the IT when to deliver the next interrupt. */ - /* Only bottom 32-bits of next_tick are written to cr16. */ mtctl(next_tick, 16); + /* Skip one clocktick on purpose if we missed next_tick. + * The new CR16 must be "later" than current CR16 otherwise + * itimer would not fire until CR16 wrapped - e.g 4 seconds + * later on a 1Ghz processor. We'll account for the missed + * tick on the next timer interrupt. + * + * "next_tick - now" will always give the difference regardless + * if one or the other wrapped. If "now" is "bigger" we'll end up + * with a very large unsigned number. + */ + now2 = mfctl(16); + if (next_tick - now2 > cpt) + mtctl(next_tick+cpt, 16); + +#if 1 +/* + * GGG: DEBUG code for how many cycles programming CR16 used. + */ + if (unlikely(now2 - now > 0x3000)) /* 12K cycles */ + printk (KERN_CRIT "timer_interrupt(CPU %d): SLOW! 0x%lx cycles!" + " cyc %lX rem %lX " + " next/now %lX/%lX\n", + cpu, now2 - now, cycles_elapsed, cycles_remainder, + next_tick, now ); +#endif + + /* Can we differentiate between "early CR16" (aka Scenario 1) and + * "long delay" (aka Scenario 3)? I don't think so. + * + * Timer_interrupt will be delivered at least a few hundred cycles + * after the IT fires. But it's arbitrary how much time passes + * before we call it "late". I've picked one second. + * + * It's important NO printk's are between reading CR16 and + * setting up the next value. May introduce huge variance. + */ + if (unlikely(ticks_elapsed > HZ)) { + /* Scenario 3: very long delay? bad in any case */ + printk (KERN_CRIT "timer_interrupt(CPU %d): delayed!" + " cycles %lX rem %lX " + " next/now %lX/%lX\n", + cpu, + cycles_elapsed, cycles_remainder, + next_tick, now ); + } /* Done mucking with unreliable delivery of interrupts. * Go do system house keeping. -- cgit v1.1 From e82a3b75127188f20c7780bec580e148beb29da7 Mon Sep 17 00:00:00 2001 From: Helge Deller <deller@gmx.de> Date: Tue, 16 Jun 2009 20:51:48 +0000 Subject: parisc: ensure broadcast tlb purge runs single threaded The TLB flushing functions on hppa, which causes PxTLB broadcasts on the system bus, needs to be protected by irq-safe spinlocks to avoid irq handlers to deadlock the kernel. The deadlocks only happened during I/O intensive loads and triggered pretty seldom, which is why this bug went so long unnoticed. Signed-off-by: Helge Deller <deller@gmx.de> [edited to use spin_lock_irqsave on UP as well since we'd been locking there all this time anyway, --kyle] Signed-off-by: Kyle McMartin <kyle@mcmartin.ca> --- arch/parisc/include/asm/tlbflush.h | 14 +++++++------- arch/parisc/kernel/cache.c | 23 +++++++++++++++-------- arch/parisc/kernel/pci-dma.c | 12 ++++++++---- 3 files changed, 30 insertions(+), 19 deletions(-) (limited to 'arch') diff --git a/arch/parisc/include/asm/tlbflush.h b/arch/parisc/include/asm/tlbflush.h index 1f6fd4f..8f1a810 100644 --- a/arch/parisc/include/asm/tlbflush.h +++ b/arch/parisc/include/asm/tlbflush.h @@ -12,14 +12,12 @@ * N class systems, only one PxTLB inter processor broadcast can be * active at any one time on the Merced bus. This tlb purge * synchronisation is fairly lightweight and harmless so we activate - * it on all SMP systems not just the N class. We also need to have - * preemption disabled on uniprocessor machines, and spin_lock does that - * nicely. + * it on all systems not just the N class. */ extern spinlock_t pa_tlb_lock; -#define purge_tlb_start(x) spin_lock(&pa_tlb_lock) -#define purge_tlb_end(x) spin_unlock(&pa_tlb_lock) +#define purge_tlb_start(flags) spin_lock_irqsave(&pa_tlb_lock, flags) +#define purge_tlb_end(flags) spin_unlock_irqrestore(&pa_tlb_lock, flags) extern void flush_tlb_all(void); extern void flush_tlb_all_local(void *); @@ -63,14 +61,16 @@ static inline void flush_tlb_mm(struct mm_struct *mm) static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr) { + unsigned long flags; + /* For one page, it's not worth testing the split_tlb variable */ mb(); mtsp(vma->vm_mm->context,1); - purge_tlb_start(); + purge_tlb_start(flags); pdtlb(addr); pitlb(addr); - purge_tlb_end(); + purge_tlb_end(flags); } void __flush_tlb_range(unsigned long sid, diff --git a/arch/parisc/kernel/cache.c b/arch/parisc/kernel/cache.c index f34082d..b6ed34d 100644 --- a/arch/parisc/kernel/cache.c +++ b/arch/parisc/kernel/cache.c @@ -397,12 +397,13 @@ EXPORT_SYMBOL(flush_kernel_icache_range_asm); void clear_user_page_asm(void *page, unsigned long vaddr) { + unsigned long flags; /* This function is implemented in assembly in pacache.S */ extern void __clear_user_page_asm(void *page, unsigned long vaddr); - purge_tlb_start(); + purge_tlb_start(flags); __clear_user_page_asm(page, vaddr); - purge_tlb_end(); + purge_tlb_end(flags); } #define FLUSH_THRESHOLD 0x80000 /* 0.5MB */ @@ -443,20 +444,24 @@ extern void clear_user_page_asm(void *page, unsigned long vaddr); void clear_user_page(void *page, unsigned long vaddr, struct page *pg) { + unsigned long flags; + purge_kernel_dcache_page((unsigned long)page); - purge_tlb_start(); + purge_tlb_start(flags); pdtlb_kernel(page); - purge_tlb_end(); + purge_tlb_end(flags); clear_user_page_asm(page, vaddr); } EXPORT_SYMBOL(clear_user_page); void flush_kernel_dcache_page_addr(void *addr) { + unsigned long flags; + flush_kernel_dcache_page_asm(addr); - purge_tlb_start(); + purge_tlb_start(flags); pdtlb_kernel(addr); - purge_tlb_end(); + purge_tlb_end(flags); } EXPORT_SYMBOL(flush_kernel_dcache_page_addr); @@ -489,8 +494,10 @@ void __flush_tlb_range(unsigned long sid, unsigned long start, if (npages >= 512) /* 2MB of space: arbitrary, should be tuned */ flush_tlb_all(); else { + unsigned long flags; + mtsp(sid, 1); - purge_tlb_start(); + purge_tlb_start(flags); if (split_tlb) { while (npages--) { pdtlb(start); @@ -503,7 +510,7 @@ void __flush_tlb_range(unsigned long sid, unsigned long start, start += PAGE_SIZE; } } - purge_tlb_end(); + purge_tlb_end(flags); } } diff --git a/arch/parisc/kernel/pci-dma.c b/arch/parisc/kernel/pci-dma.c index 7d927ea..c07f618 100644 --- a/arch/parisc/kernel/pci-dma.c +++ b/arch/parisc/kernel/pci-dma.c @@ -90,12 +90,14 @@ static inline int map_pte_uncached(pte_t * pte, if (end > PMD_SIZE) end = PMD_SIZE; do { + unsigned long flags; + if (!pte_none(*pte)) printk(KERN_ERR "map_pte_uncached: page already exists\n"); set_pte(pte, __mk_pte(*paddr_ptr, PAGE_KERNEL_UNC)); - purge_tlb_start(); + purge_tlb_start(flags); pdtlb_kernel(orig_vaddr); - purge_tlb_end(); + purge_tlb_end(flags); vaddr += PAGE_SIZE; orig_vaddr += PAGE_SIZE; (*paddr_ptr) += PAGE_SIZE; @@ -168,11 +170,13 @@ static inline void unmap_uncached_pte(pmd_t * pmd, unsigned long vaddr, if (end > PMD_SIZE) end = PMD_SIZE; do { + unsigned long flags; pte_t page = *pte; + pte_clear(&init_mm, vaddr, pte); - purge_tlb_start(); + purge_tlb_start(flags); pdtlb_kernel(orig_vaddr); - purge_tlb_end(); + purge_tlb_end(flags); vaddr += PAGE_SIZE; orig_vaddr += PAGE_SIZE; pte++; -- cgit v1.1 From 4435607e986c792a8753f8850b570fdd80b21b10 Mon Sep 17 00:00:00 2001 From: Kyle McMartin <kyle@mcmartin.ca> Date: Tue, 23 Jun 2009 11:40:37 -0400 Subject: parisc: wire up rt_tgsigqueueinfo Signed-off-by: Kyle McMartin <kyle@mcmartin.ca> --- arch/parisc/include/asm/unistd.h | 3 ++- arch/parisc/kernel/syscall_table.S | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/parisc/include/asm/unistd.h b/arch/parisc/include/asm/unistd.h index a3c3419..4e2aa0d 100644 --- a/arch/parisc/include/asm/unistd.h +++ b/arch/parisc/include/asm/unistd.h @@ -809,8 +809,9 @@ #define __NR_inotify_init1 (__NR_Linux + 314) #define __NR_preadv (__NR_Linux + 315) #define __NR_pwritev (__NR_Linux + 316) +#define __NR_rt_tgsigqueueinfo (__NR_Linux + 317) -#define __NR_Linux_syscalls (__NR_pwritev + 1) +#define __NR_Linux_syscalls (__NR_rt_tgsigqueueinfo + 1) #define __IGNORE_select /* newselect */ diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S index 6a62961..83f8959 100644 --- a/arch/parisc/kernel/syscall_table.S +++ b/arch/parisc/kernel/syscall_table.S @@ -413,8 +413,9 @@ ENTRY_SAME(dup3) ENTRY_SAME(pipe2) ENTRY_SAME(inotify_init1) - ENTRY_COMP(preadv) + ENTRY_COMP(preadv) /* 315 */ ENTRY_COMP(pwritev) + ENTRY_COMP(rt_tgsigqueueinfo) /* Nothing yet */ -- cgit v1.1 From c3301ab4fb64cf84321d35a8e94f68c94c816dc1 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig <hch@lst.de> Date: Tue, 23 Jun 2009 11:47:07 -0400 Subject: parisc: remove dead code from sys_parisc32.c Unless I'm totally missing something get_fd_set32/set_fd_set32 are completely unused. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca> --- arch/parisc/kernel/sys_parisc32.c | 62 --------------------------------------- 1 file changed, 62 deletions(-) (limited to 'arch') diff --git a/arch/parisc/kernel/sys_parisc32.c b/arch/parisc/kernel/sys_parisc32.c index 1adb40c..92a0aca 100644 --- a/arch/parisc/kernel/sys_parisc32.c +++ b/arch/parisc/kernel/sys_parisc32.c @@ -174,68 +174,6 @@ asmlinkage long sys32_sched_rr_get_interval(pid_t pid, return ret; } -/*** copied from mips64 ***/ -/* - * Ooo, nasty. We need here to frob 32-bit unsigned longs to - * 64-bit unsigned longs. - */ - -static inline int -get_fd_set32(unsigned long n, u32 *ufdset, unsigned long *fdset) -{ - n = (n + 8*sizeof(u32) - 1) / (8*sizeof(u32)); - if (ufdset) { - unsigned long odd; - - if (!access_ok(VERIFY_WRITE, ufdset, n*sizeof(u32))) - return -EFAULT; - - odd = n & 1UL; - n &= ~1UL; - while (n) { - unsigned long h, l; - __get_user(l, ufdset); - __get_user(h, ufdset+1); - ufdset += 2; - *fdset++ = h << 32 | l; - n -= 2; - } - if (odd) - __get_user(*fdset, ufdset); - } else { - /* Tricky, must clear full unsigned long in the - * kernel fdset at the end, this makes sure that - * actually happens. - */ - memset(fdset, 0, ((n + 1) & ~1)*sizeof(u32)); - } - return 0; -} - -static inline void -set_fd_set32(unsigned long n, u32 *ufdset, unsigned long *fdset) -{ - unsigned long odd; - n = (n + 8*sizeof(u32) - 1) / (8*sizeof(u32)); - - if (!ufdset) - return; - - odd = n & 1UL; - n &= ~1UL; - while (n) { - unsigned long h, l; - l = *fdset++; - h = l >> 32; - __put_user(l, ufdset); - __put_user(h, ufdset+1); - ufdset += 2; - n -= 2; - } - if (odd) - __put_user(*fdset, ufdset); -} - struct msgbuf32 { int mtype; char mtext[1]; -- cgit v1.1 From 20dbc9f724e02c26e30d89cf50e7ce259ab46da4 Mon Sep 17 00:00:00 2001 From: Kyle McMartin <kyle@mcmartin.ca> Date: Tue, 23 Jun 2009 11:51:43 -0400 Subject: parisc: fix compile warning in mm/init.c arch/parisc/mm/init.c: In function 'free_initmem': 381: warning: passing argument 1 of 'memset' makes pointer from integer without a cast Signed-off-by: Kyle McMartin <kyle@mcmartin.ca> --- arch/parisc/mm/init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c index 6c5ea96..b0831d9 100644 --- a/arch/parisc/mm/init.c +++ b/arch/parisc/mm/init.c @@ -378,7 +378,7 @@ void free_initmem(void) /* Attempt to catch anyone trying to execute code here * by filling the page with BRK insns. */ - memset(init_begin, 0x00, init_end - init_begin); + memset((void *)init_begin, 0x00, init_end - init_begin); flush_icache_range(init_begin, init_end); #endif -- cgit v1.1 From 64a0cdb026666cd9911fa045b863fb1f0f255dd8 Mon Sep 17 00:00:00 2001 From: Kyle McMartin <kyle@mcmartin.ca> Date: Tue, 23 Jun 2009 13:10:03 -0400 Subject: parisc: processor.c, fix bloated stack frame The pa_pdc_cell struct can be kmalloc'd, so do that instead. Signed-off-by: Kyle McMartin <kyle@mcmartin.ca> --- arch/parisc/kernel/processor.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/parisc/kernel/processor.c b/arch/parisc/kernel/processor.c index 1ca69a8..c8fb61e 100644 --- a/arch/parisc/kernel/processor.c +++ b/arch/parisc/kernel/processor.c @@ -120,22 +120,28 @@ static int __cpuinit processor_probe(struct parisc_device *dev) if (is_pdc_pat()) { ulong status; unsigned long bytecnt; - pdc_pat_cell_mod_maddr_block_t pa_pdc_cell; + pdc_pat_cell_mod_maddr_block_t *pa_pdc_cell; #undef USE_PAT_CPUID #ifdef USE_PAT_CPUID struct pdc_pat_cpu_num cpu_info; #endif + pa_pdc_cell = kmalloc(sizeof (*pa_pdc_cell), GFP_KERNEL); + if (!pa_pdc_cell) + panic("couldn't allocate memory for PDC_PAT_CELL!"); + status = pdc_pat_cell_module(&bytecnt, dev->pcell_loc, - dev->mod_index, PA_VIEW, &pa_pdc_cell); + dev->mod_index, PA_VIEW, pa_pdc_cell); BUG_ON(PDC_OK != status); /* verify it's the same as what do_pat_inventory() found */ - BUG_ON(dev->mod_info != pa_pdc_cell.mod_info); - BUG_ON(dev->pmod_loc != pa_pdc_cell.mod_location); + BUG_ON(dev->mod_info != pa_pdc_cell->mod_info); + BUG_ON(dev->pmod_loc != pa_pdc_cell->mod_location); + + txn_addr = pa_pdc_cell->mod[0]; /* id_eid for IO sapic */ - txn_addr = pa_pdc_cell.mod[0]; /* id_eid for IO sapic */ + kfree(pa_pdc_cell); #ifdef USE_PAT_CPUID /* We need contiguous numbers for cpuid. Firmware's notion -- cgit v1.1 From 0d56d1aa0e756f077b700420c54e1a52140e73b4 Mon Sep 17 00:00:00 2001 From: Kyle McMartin <kyle@mcmartin.ca> Date: Tue, 23 Jun 2009 13:11:22 -0400 Subject: parisc: inventory.c, fix bloated stack frame The pa_pdc_cell struct can be kmalloc'd, so do that instead. Signed-off-by: Kyle McMartin <kyle@mcmartin.ca> --- arch/parisc/kernel/inventory.c | 41 ++++++++++++++++++++++++----------------- 1 file changed, 24 insertions(+), 17 deletions(-) (limited to 'arch') diff --git a/arch/parisc/kernel/inventory.c b/arch/parisc/kernel/inventory.c index bd1f7f1..d228d82 100644 --- a/arch/parisc/kernel/inventory.c +++ b/arch/parisc/kernel/inventory.c @@ -170,23 +170,27 @@ static void __init pagezero_memconfig(void) static int __init pat_query_module(ulong pcell_loc, ulong mod_index) { - pdc_pat_cell_mod_maddr_block_t pa_pdc_cell; + pdc_pat_cell_mod_maddr_block_t *pa_pdc_cell; unsigned long bytecnt; unsigned long temp; /* 64-bit scratch value */ long status; /* PDC return value status */ struct parisc_device *dev; + pa_pdc_cell = kmalloc(sizeof (*pa_pdc_cell), GFP_KERNEL); + if (!pa_pdc_cell) + panic("couldn't allocate memory for PDC_PAT_CELL!"); + /* return cell module (PA or Processor view) */ status = pdc_pat_cell_module(&bytecnt, pcell_loc, mod_index, - PA_VIEW, &pa_pdc_cell); + PA_VIEW, pa_pdc_cell); if (status != PDC_OK) { /* no more cell modules or error */ return status; } - temp = pa_pdc_cell.cba; - dev = alloc_pa_dev(PAT_GET_CBA(temp), &pa_pdc_cell.mod_path); + temp = pa_pdc_cell->cba; + dev = alloc_pa_dev(PAT_GET_CBA(temp), &(pa_pdc_cell->mod_path)); if (!dev) { return PDC_OK; } @@ -203,8 +207,8 @@ pat_query_module(ulong pcell_loc, ulong mod_index) /* save generic info returned from the call */ /* REVISIT: who is the consumer of this? not sure yet... */ - dev->mod_info = pa_pdc_cell.mod_info; /* pass to PAT_GET_ENTITY() */ - dev->pmod_loc = pa_pdc_cell.mod_location; + dev->mod_info = pa_pdc_cell->mod_info; /* pass to PAT_GET_ENTITY() */ + dev->pmod_loc = pa_pdc_cell->mod_location; register_parisc_device(dev); /* advertise device */ @@ -216,14 +220,14 @@ pat_query_module(ulong pcell_loc, ulong mod_index) case PAT_ENTITY_PROC: printk(KERN_DEBUG "PAT_ENTITY_PROC: id_eid 0x%lx\n", - pa_pdc_cell.mod[0]); + pa_pdc_cell->mod[0]); break; case PAT_ENTITY_MEM: printk(KERN_DEBUG "PAT_ENTITY_MEM: amount 0x%lx min_gni_base 0x%lx min_gni_len 0x%lx\n", - pa_pdc_cell.mod[0], pa_pdc_cell.mod[1], - pa_pdc_cell.mod[2]); + pa_pdc_cell->mod[0], pa_pdc_cell->mod[1], + pa_pdc_cell->mod[2]); break; case PAT_ENTITY_CA: printk(KERN_DEBUG "PAT_ENTITY_CA: %ld\n", pcell_loc); @@ -243,23 +247,26 @@ pat_query_module(ulong pcell_loc, ulong mod_index) print_ranges: pdc_pat_cell_module(&bytecnt, pcell_loc, mod_index, IO_VIEW, &io_pdc_cell); - printk(KERN_DEBUG "ranges %ld\n", pa_pdc_cell.mod[1]); - for (i = 0; i < pa_pdc_cell.mod[1]; i++) { + printk(KERN_DEBUG "ranges %ld\n", pa_pdc_cell->mod[1]); + for (i = 0; i < pa_pdc_cell->mod[1]; i++) { printk(KERN_DEBUG " PA_VIEW %ld: 0x%016lx 0x%016lx 0x%016lx\n", - i, pa_pdc_cell.mod[2 + i * 3], /* type */ - pa_pdc_cell.mod[3 + i * 3], /* start */ - pa_pdc_cell.mod[4 + i * 3]); /* finish (ie end) */ + i, pa_pdc_cell->mod[2 + i * 3], /* type */ + pa_pdc_cell->mod[3 + i * 3], /* start */ + pa_pdc_cell->mod[4 + i * 3]); /* finish (ie end) */ printk(KERN_DEBUG " IO_VIEW %ld: 0x%016lx 0x%016lx 0x%016lx\n", - i, io_pdc_cell.mod[2 + i * 3], /* type */ - io_pdc_cell.mod[3 + i * 3], /* start */ - io_pdc_cell.mod[4 + i * 3]); /* finish (ie end) */ + i, io_pdc_cell->mod[2 + i * 3], /* type */ + io_pdc_cell->mod[3 + i * 3], /* start */ + io_pdc_cell->mod[4 + i * 3]); /* finish (ie end) */ } printk(KERN_DEBUG "\n"); break; } #endif /* DEBUG_PAT */ + + kfree(pa_pdc_cell); + return PDC_OK; } -- cgit v1.1 From 538e23615fe78b6da151ef136e3f7c6ad1fda2c1 Mon Sep 17 00:00:00 2001 From: Kyle McMartin <kyle@mcmartin.ca> Date: Tue, 23 Jun 2009 20:22:06 -0400 Subject: parisc: wire sys_perf_counter_open to sys_ni_syscall Reserve a syscall slot for sys_perf_counter_open. Signed-off-by: Kyle McMartin <kyle@mcmartin.ca> --- arch/parisc/include/asm/unistd.h | 3 ++- arch/parisc/kernel/syscall_table.S | 1 + 2 files changed, 3 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/parisc/include/asm/unistd.h b/arch/parisc/include/asm/unistd.h index 4e2aa0d..f3d3b8b 100644 --- a/arch/parisc/include/asm/unistd.h +++ b/arch/parisc/include/asm/unistd.h @@ -810,8 +810,9 @@ #define __NR_preadv (__NR_Linux + 315) #define __NR_pwritev (__NR_Linux + 316) #define __NR_rt_tgsigqueueinfo (__NR_Linux + 317) +#define __NR_perf_counter_open (__NR_Linux + 318) -#define __NR_Linux_syscalls (__NR_rt_tgsigqueueinfo + 1) +#define __NR_Linux_syscalls (__NR_perf_counter_open + 1) #define __IGNORE_select /* newselect */ diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S index 83f8959..0c83673 100644 --- a/arch/parisc/kernel/syscall_table.S +++ b/arch/parisc/kernel/syscall_table.S @@ -416,6 +416,7 @@ ENTRY_COMP(preadv) /* 315 */ ENTRY_COMP(pwritev) ENTRY_COMP(rt_tgsigqueueinfo) + ENTRY_SAME(ni_syscall) /* Nothing yet */ -- cgit v1.1 From abf1e11a0dcf5514139cb76ed8eb050107653abd Mon Sep 17 00:00:00 2001 From: Kyle McMartin <kyle@mcmartin.ca> Date: Tue, 23 Jun 2009 21:32:18 -0400 Subject: parisc: add task_pt_regs macro needed for perf_counters. Signed-off-by: Kyle McMartin <kyle@mcmartin.ca> --- arch/parisc/include/asm/processor.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/parisc/include/asm/processor.h b/arch/parisc/include/asm/processor.h index 9d64df8..9ce66e9 100644 --- a/arch/parisc/include/asm/processor.h +++ b/arch/parisc/include/asm/processor.h @@ -18,6 +18,7 @@ #include <asm/types.h> #include <asm/system.h> #include <asm/percpu.h> + #endif /* __ASSEMBLY__ */ #define KERNEL_STACK_SIZE (4*PAGE_SIZE) @@ -127,6 +128,8 @@ struct thread_struct { unsigned long flags; }; +#define task_pt_regs(tsk) ((struct pt_regs *)&((tsk)->thread.regs)) + /* Thread struct flags. */ #define PARISC_UAC_NOPRINT (1UL << 0) /* see prctl and unaligned.c */ #define PARISC_UAC_SIGBUS (1UL << 1) -- cgit v1.1 From 2d4618dce6a318ff4ec78dfe492cc3793015d540 Mon Sep 17 00:00:00 2001 From: Kyle McMartin <kyle@mcmartin.ca> Date: Tue, 23 Jun 2009 21:38:49 -0400 Subject: parisc: perf: wire up sys_perf_counter_open Signed-off-by: Kyle McMartin <kyle@mcmartin.ca> --- arch/parisc/Kconfig | 1 + arch/parisc/include/asm/perf_counter.h | 7 +++++++ arch/parisc/kernel/syscall_table.S | 2 +- 3 files changed, 9 insertions(+), 1 deletion(-) create mode 100644 arch/parisc/include/asm/perf_counter.h (limited to 'arch') diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig index 9038f39..c38bbc7 100644 --- a/arch/parisc/Kconfig +++ b/arch/parisc/Kconfig @@ -16,6 +16,7 @@ config PARISC select RTC_DRV_GENERIC select INIT_ALL_POSSIBLE select BUG + select HAVE_PERF_COUNTERS help The PA-RISC microprocessor is designed by Hewlett-Packard and used in many of their workstations & servers (HP9000 700 and 800 series, diff --git a/arch/parisc/include/asm/perf_counter.h b/arch/parisc/include/asm/perf_counter.h new file mode 100644 index 0000000..dc9e829 --- /dev/null +++ b/arch/parisc/include/asm/perf_counter.h @@ -0,0 +1,7 @@ +#ifndef __ASM_PARISC_PERF_COUNTER_H +#define __ASM_PARISC_PERF_COUNTER_H + +/* parisc only supports software counters through this interface. */ +static inline void set_perf_counter_pending(void) { } + +#endif /* __ASM_PARISC_PERF_COUNTER_H */ diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S index 0c83673..cf145eb 100644 --- a/arch/parisc/kernel/syscall_table.S +++ b/arch/parisc/kernel/syscall_table.S @@ -416,7 +416,7 @@ ENTRY_COMP(preadv) /* 315 */ ENTRY_COMP(pwritev) ENTRY_COMP(rt_tgsigqueueinfo) - ENTRY_SAME(ni_syscall) + ENTRY_SAME(perf_counter_open) /* Nothing yet */ -- cgit v1.1 From 64daa4435a40aa1b7d0ece598ae783b89dda13ee Mon Sep 17 00:00:00 2001 From: Kyle McMartin <kyle@mcmartin.ca> Date: Thu, 2 Jul 2009 13:10:29 -0400 Subject: parisc: use generic atomic64 on 32-bit Somewhat redundant since our atomic_t uses hashed-locks on 32-bit anyway... Maybe we can clean those up to be generic too someday. Signed-off-by: Kyle McMartin <kyle@mcmartin.ca> --- arch/parisc/Kconfig | 1 + arch/parisc/include/asm/atomic.h | 6 +++++- 2 files changed, 6 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig index c38bbc7..06f8d5b 100644 --- a/arch/parisc/Kconfig +++ b/arch/parisc/Kconfig @@ -17,6 +17,7 @@ config PARISC select INIT_ALL_POSSIBLE select BUG select HAVE_PERF_COUNTERS + select GENERIC_ATOMIC64 if !64BIT help The PA-RISC microprocessor is designed by Hewlett-Packard and used in many of their workstations & servers (HP9000 700 and 800 series, diff --git a/arch/parisc/include/asm/atomic.h b/arch/parisc/include/asm/atomic.h index 82e9688..8bc9e96 100644 --- a/arch/parisc/include/asm/atomic.h +++ b/arch/parisc/include/asm/atomic.h @@ -336,7 +336,11 @@ static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u) #define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0) -#endif /* CONFIG_64BIT */ +#else /* CONFIG_64BIT */ + +#include <asm-generic/atomic64.h> + +#endif /* !CONFIG_64BIT */ #include <asm-generic/atomic-long.h> -- cgit v1.1 From 47220f623c3216ca276bad517ed208ea2ffceaa2 Mon Sep 17 00:00:00 2001 From: Paul Mundt <lethal@linux-sh.org> Date: Fri, 3 Jul 2009 13:08:28 +0900 Subject: sh: define PERF_COUNTER_INDEX_OFFSET. Fixes up recent build breakage. Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/include/asm/perf_counter.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/sh/include/asm/perf_counter.h b/arch/sh/include/asm/perf_counter.h index 61c2b40..d8e6bb9 100644 --- a/arch/sh/include/asm/perf_counter.h +++ b/arch/sh/include/asm/perf_counter.h @@ -4,4 +4,6 @@ /* SH only supports software counters through this interface. */ static inline void set_perf_counter_pending(void) {} +#define PERF_COUNTER_INDEX_OFFSET 0 + #endif /* __ASM_SH_PERF_COUNTER_H */ -- cgit v1.1 From 5c68b09900f04c3de55af43155435b9392f03844 Mon Sep 17 00:00:00 2001 From: Daniel Mack <daniel@caiaq.de> Date: Mon, 22 Jun 2009 21:01:58 +0200 Subject: [ARM] pxa: correct I2CPWR clock for pxa3xx In commit f23d4911319fd, the pwr-i2c device name changed due to the newly introduced device table. This patch fixes the clock so the driver's probe will succeed again. Signed-off-by: Daniel Mack <daniel@caiaq.de> Acked-by: Russell King <linux@arm.linux.org.uk> Signed-off-by: Eric Miao <eric.y.miao@gmail.com> --- arch/arm/mach-pxa/pxa3xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 6f678d9..09b7b1a 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -250,7 +250,7 @@ static DEFINE_PXA3_CKEN(pxa3xx_mmc2, MMC2, 19500000, 0); static struct clk_lookup pxa3xx_clkregs[] = { INIT_CLKREG(&clk_pxa3xx_pout, NULL, "CLK_POUT"), /* Power I2C clock is always on */ - INIT_CLKREG(&clk_dummy, "pxa2xx-i2c.1", NULL), + INIT_CLKREG(&clk_dummy, "pxa3xx-pwri2c.1", NULL), INIT_CLKREG(&clk_pxa3xx_lcd, "pxa2xx-fb", NULL), INIT_CLKREG(&clk_pxa3xx_camera, NULL, "CAMCLK"), INIT_CLKREG(&clk_pxa3xx_ac97, NULL, "AC97CLK"), -- cgit v1.1 From 4aa78264d14bb0e87897acb90941c368248e20ce Mon Sep 17 00:00:00 2001 From: Daniel Mack <daniel@caiaq.de> Date: Fri, 19 Jun 2009 22:56:09 +0200 Subject: [ARM] pxa: use kzalloc() in pxa_init_gpio_chip() As slab is available early now, use kzalloc() rather than alloc_bootmem_low() in pxa_init_gpio_chip(). This removes the following boot time warning: <4>------------[ cut here ]------------ <4>WARNING: at mm/bootmem.c:535 alloc_arch_preferred_bootmem+0x2c/0x54() <d>Modules linked in: [<c0029430>] (unwind_backtrace+0x0/0xdc) from [<c0036f64>] (warn_slowpath_common+0x4c/0x80) [<c0036f64>] (warn_slowpath_common+0x4c/0x80) from [<c000ede0>] (alloc_arch_preferred_bootmem+0x2c/0x54) [<c000ede0>] (alloc_arch_preferred_bootmem+0x2c/0x54) from [<c000f2e4>] (___alloc_bootmem_nopanic+0x34/0xd0) [<c000f2e4>] (___alloc_bootmem_nopanic+0x34/0xd0) from [<c000f6e4>] (___alloc_bootmem+0xc/0x34) [<c000f6e4>] (___alloc_bootmem+0xc/0x34) from [<c000cb20>] (pxa_init_gpio+0x48/0x228) [<c000cb20>] (pxa_init_gpio+0x48/0x228) from [<c0009794>] (init_IRQ+0x34/0x44) [<c0009794>] (init_IRQ+0x34/0x44) from [<c00089d4>] (start_kernel+0x144/0x264) [<c00089d4>] (start_kernel+0x144/0x264) from [<a0008034>] (0xa0008034) <4>---[ end trace 1b75b31a2719ed1c ]--- Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com> --- arch/arm/plat-pxa/gpio.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-pxa/gpio.c b/arch/arm/plat-pxa/gpio.c index abc79d4..98548c6 100644 --- a/arch/arm/plat-pxa/gpio.c +++ b/arch/arm/plat-pxa/gpio.c @@ -16,7 +16,7 @@ #include <linux/irq.h> #include <linux/io.h> #include <linux/sysdev.h> -#include <linux/bootmem.h> +#include <linux/slab.h> #include <mach/gpio.h> @@ -112,17 +112,12 @@ static int __init pxa_init_gpio_chip(int gpio_end) int i, gpio, nbanks = gpio_to_bank(gpio_end) + 1; struct pxa_gpio_chip *chips; - /* this is early, we have to use bootmem allocator, and we really - * want this to be allocated dynamically for different 'gpio_end' - */ - chips = alloc_bootmem_low(nbanks * sizeof(struct pxa_gpio_chip)); + chips = kzalloc(nbanks * sizeof(struct pxa_gpio_chip), GFP_KERNEL); if (chips == NULL) { pr_err("%s: failed to allocate GPIO chips\n", __func__); return -ENOMEM; } - memset(chips, 0, nbanks * sizeof(struct pxa_gpio_chip)); - for (i = 0, gpio = 0; i < nbanks; i++, gpio += 32) { struct gpio_chip *c = &chips[i].chip; -- cgit v1.1 From bbf2a330d92c5afccfd17592ba9ccd50f41cf748 Mon Sep 17 00:00:00 2001 From: Eric Dumazet <eric.dumazet@gmail.com> Date: Fri, 3 Jul 2009 00:08:26 +0200 Subject: x86: atomic64: The atomic64_t data type should be 8 bytes aligned on 32-bit too Locked instructions on two cache lines at once are painful. If atomic64_t uses two cache lines, my test program is 10x slower. The chance for that is significant: 4/32 or 12.5%. Make sure an atomic64_t is 8 bytes aligned. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: David Howells <dhowells@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> LKML-Reference: <alpine.LFD.2.01.0907021653030.3210@localhost.localdomain> [ changed it to __aligned(8) as per Andrew's suggestion ] Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/include/asm/atomic_32.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/include/asm/atomic_32.h b/arch/x86/include/asm/atomic_32.h index 2503d4e..ae0fbb5 100644 --- a/arch/x86/include/asm/atomic_32.h +++ b/arch/x86/include/asm/atomic_32.h @@ -250,7 +250,7 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u) /* An 64bit atomic type */ typedef struct { - unsigned long long counter; + unsigned long long __aligned(8) counter; } atomic64_t; #define ATOMIC64_INIT(val) { (val) } -- cgit v1.1 From b7882b7c65abb00194bdb3d4a22d27d70fcc59ba Mon Sep 17 00:00:00 2001 From: Ingo Molnar <mingo@elte.hu> Date: Fri, 3 Jul 2009 13:26:39 +0200 Subject: x86: atomic64: Move the 32-bit atomic64_t implementation to a .c file Linus noted that the atomic64_t primitives are all inlines currently which is crazy because these functions have a large register footprint anyway. Move them to a separate file: arch/x86/lib/atomic64_32.c Also, while at it, rename all uses of 'unsigned long long' to the much shorter u64. This makes the appearance of the prototypes a lot nicer - and it also uncovered a few bugs where (yet unused) API variants had 'long' as their return type instead of u64. [ More intrusive changes are not yet done in this patch. ] Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: David Howells <dhowells@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> LKML-Reference: <alpine.LFD.2.01.0907021653030.3210@localhost.localdomain> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/include/asm/atomic_32.h | 137 ++++--------------------- arch/x86/lib/Makefile | 1 + arch/x86/lib/atomic64_32.c | 216 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 237 insertions(+), 117 deletions(-) create mode 100644 arch/x86/lib/atomic64_32.c (limited to 'arch') diff --git a/arch/x86/include/asm/atomic_32.h b/arch/x86/include/asm/atomic_32.h index ae0fbb5..311a43e 100644 --- a/arch/x86/include/asm/atomic_32.h +++ b/arch/x86/include/asm/atomic_32.h @@ -250,7 +250,7 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u) /* An 64bit atomic type */ typedef struct { - unsigned long long __aligned(8) counter; + u64 __aligned(8) counter; } atomic64_t; #define ATOMIC64_INIT(val) { (val) } @@ -264,31 +264,7 @@ typedef struct { */ #define __atomic64_read(ptr) ((ptr)->counter) -static inline unsigned long long -cmpxchg8b(unsigned long long *ptr, unsigned long long old, unsigned long long new) -{ - asm volatile( - - LOCK_PREFIX "cmpxchg8b (%[ptr])\n" - - : "=A" (old) - - : [ptr] "D" (ptr), - "A" (old), - "b" (ll_low(new)), - "c" (ll_high(new)) - - : "memory"); - - return old; -} - -static inline unsigned long long -atomic64_cmpxchg(atomic64_t *ptr, unsigned long long old_val, - unsigned long long new_val) -{ - return cmpxchg8b(&ptr->counter, old_val, new_val); -} +extern u64 atomic64_cmpxchg(atomic64_t *ptr, u64 old_val, u64 new_val); /** * atomic64_xchg - xchg atomic64 variable @@ -298,18 +274,7 @@ atomic64_cmpxchg(atomic64_t *ptr, unsigned long long old_val, * Atomically xchgs the value of @ptr to @new_val and returns * the old value. */ - -static inline unsigned long long -atomic64_xchg(atomic64_t *ptr, unsigned long long new_val) -{ - unsigned long long old_val; - - do { - old_val = atomic_read(ptr); - } while (atomic64_cmpxchg(ptr, old_val, new_val) != old_val); - - return old_val; -} +extern u64 atomic64_xchg(atomic64_t *ptr, u64 new_val); /** * atomic64_set - set atomic64 variable @@ -318,10 +283,7 @@ atomic64_xchg(atomic64_t *ptr, unsigned long long new_val) * * Atomically sets the value of @ptr to @new_val. */ -static inline void atomic64_set(atomic64_t *ptr, unsigned long long new_val) -{ - atomic64_xchg(ptr, new_val); -} +extern void atomic64_set(atomic64_t *ptr, u64 new_val); /** * atomic64_read - read atomic64 variable @@ -329,16 +291,7 @@ static inline void atomic64_set(atomic64_t *ptr, unsigned long long new_val) * * Atomically reads the value of @ptr and returns it. */ -static inline unsigned long long atomic64_read(atomic64_t *ptr) -{ - unsigned long long curr_val; - - do { - curr_val = __atomic64_read(ptr); - } while (atomic64_cmpxchg(ptr, curr_val, curr_val) != curr_val); - - return curr_val; -} +extern u64 atomic64_read(atomic64_t *ptr); /** * atomic64_add_return - add and return @@ -347,34 +300,14 @@ static inline unsigned long long atomic64_read(atomic64_t *ptr) * * Atomically adds @delta to @ptr and returns @delta + *@ptr */ -static inline unsigned long long -atomic64_add_return(unsigned long long delta, atomic64_t *ptr) -{ - unsigned long long old_val, new_val; - - do { - old_val = atomic_read(ptr); - new_val = old_val + delta; - - } while (atomic64_cmpxchg(ptr, old_val, new_val) != old_val); - - return new_val; -} - -static inline long atomic64_sub_return(unsigned long long delta, atomic64_t *ptr) -{ - return atomic64_add_return(-delta, ptr); -} +extern u64 atomic64_add_return(u64 delta, atomic64_t *ptr); -static inline long atomic64_inc_return(atomic64_t *ptr) -{ - return atomic64_add_return(1, ptr); -} - -static inline long atomic64_dec_return(atomic64_t *ptr) -{ - return atomic64_sub_return(1, ptr); -} +/* + * Other variants with different arithmetic operators: + */ +extern u64 atomic64_sub_return(u64 delta, atomic64_t *ptr); +extern u64 atomic64_inc_return(atomic64_t *ptr); +extern u64 atomic64_dec_return(atomic64_t *ptr); /** * atomic64_add - add integer to atomic64 variable @@ -383,10 +316,7 @@ static inline long atomic64_dec_return(atomic64_t *ptr) * * Atomically adds @delta to @ptr. */ -static inline void atomic64_add(unsigned long long delta, atomic64_t *ptr) -{ - atomic64_add_return(delta, ptr); -} +extern void atomic64_add(u64 delta, atomic64_t *ptr); /** * atomic64_sub - subtract the atomic64 variable @@ -395,10 +325,7 @@ static inline void atomic64_add(unsigned long long delta, atomic64_t *ptr) * * Atomically subtracts @delta from @ptr. */ -static inline void atomic64_sub(unsigned long long delta, atomic64_t *ptr) -{ - atomic64_add(-delta, ptr); -} +extern void atomic64_sub(u64 delta, atomic64_t *ptr); /** * atomic64_sub_and_test - subtract value from variable and test result @@ -409,13 +336,7 @@ static inline void atomic64_sub(unsigned long long delta, atomic64_t *ptr) * true if the result is zero, or false for all * other cases. */ -static inline int -atomic64_sub_and_test(unsigned long long delta, atomic64_t *ptr) -{ - unsigned long long old_val = atomic64_sub_return(delta, ptr); - - return old_val == 0; -} +extern int atomic64_sub_and_test(u64 delta, atomic64_t *ptr); /** * atomic64_inc - increment atomic64 variable @@ -423,10 +344,7 @@ atomic64_sub_and_test(unsigned long long delta, atomic64_t *ptr) * * Atomically increments @ptr by 1. */ -static inline void atomic64_inc(atomic64_t *ptr) -{ - atomic64_add(1, ptr); -} +extern void atomic64_inc(atomic64_t *ptr); /** * atomic64_dec - decrement atomic64 variable @@ -434,10 +352,7 @@ static inline void atomic64_inc(atomic64_t *ptr) * * Atomically decrements @ptr by 1. */ -static inline void atomic64_dec(atomic64_t *ptr) -{ - atomic64_sub(1, ptr); -} +extern void atomic64_dec(atomic64_t *ptr); /** * atomic64_dec_and_test - decrement and test @@ -447,10 +362,7 @@ static inline void atomic64_dec(atomic64_t *ptr) * returns true if the result is 0, or false for all other * cases. */ -static inline int atomic64_dec_and_test(atomic64_t *ptr) -{ - return atomic64_sub_and_test(1, ptr); -} +extern int atomic64_dec_and_test(atomic64_t *ptr); /** * atomic64_inc_and_test - increment and test @@ -460,10 +372,7 @@ static inline int atomic64_dec_and_test(atomic64_t *ptr) * and returns true if the result is zero, or false for all * other cases. */ -static inline int atomic64_inc_and_test(atomic64_t *ptr) -{ - return atomic64_sub_and_test(-1, ptr); -} +extern int atomic64_inc_and_test(atomic64_t *ptr); /** * atomic64_add_negative - add and test if negative @@ -474,13 +383,7 @@ static inline int atomic64_inc_and_test(atomic64_t *ptr) * if the result is negative, or false when * result is greater than or equal to zero. */ -static inline int -atomic64_add_negative(unsigned long long delta, atomic64_t *ptr) -{ - long long old_val = atomic64_add_return(delta, ptr); - - return old_val < 0; -} +extern int atomic64_add_negative(u64 delta, atomic64_t *ptr); #include <asm-generic/atomic-long.h> #endif /* _ASM_X86_ATOMIC_32_H */ diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile index f9d3563..c3c657c 100644 --- a/arch/x86/lib/Makefile +++ b/arch/x86/lib/Makefile @@ -10,6 +10,7 @@ lib-y += usercopy_$(BITS).o getuser.o putuser.o lib-y += memcpy_$(BITS).o ifeq ($(CONFIG_X86_32),y) + lib-y += atomic64_32.o lib-y += checksum_32.o lib-y += strstr_32.o lib-y += semaphore_32.o string_32.o diff --git a/arch/x86/lib/atomic64_32.c b/arch/x86/lib/atomic64_32.c new file mode 100644 index 0000000..d21e725 --- /dev/null +++ b/arch/x86/lib/atomic64_32.c @@ -0,0 +1,216 @@ +#include <linux/compiler.h> +#include <linux/types.h> +#include <asm/processor.h> +#include <asm/cmpxchg.h> +#include <asm/atomic.h> + +static inline u64 cmpxchg8b(u64 *ptr, u64 old, u64 new) +{ + asm volatile( + + LOCK_PREFIX "cmpxchg8b (%[ptr])\n" + + : "=A" (old) + + : [ptr] "D" (ptr), + "A" (old), + "b" (ll_low(new)), + "c" (ll_high(new)) + + : "memory"); + + return old; +} + +u64 atomic64_cmpxchg(atomic64_t *ptr, u64 old_val, u64 new_val) +{ + return cmpxchg8b(&ptr->counter, old_val, new_val); +} + +/** + * atomic64_xchg - xchg atomic64 variable + * @ptr: pointer to type atomic64_t + * @new_val: value to assign + * + * Atomically xchgs the value of @ptr to @new_val and returns + * the old value. + */ + +u64 atomic64_xchg(atomic64_t *ptr, u64 new_val) +{ + u64 old_val; + + do { + old_val = atomic_read(ptr); + } while (atomic64_cmpxchg(ptr, old_val, new_val) != old_val); + + return old_val; +} + +/** + * atomic64_set - set atomic64 variable + * @ptr: pointer to type atomic64_t + * @new_val: value to assign + * + * Atomically sets the value of @ptr to @new_val. + */ +void atomic64_set(atomic64_t *ptr, u64 new_val) +{ + atomic64_xchg(ptr, new_val); +} + +/** + * atomic64_read - read atomic64 variable + * @ptr: pointer to type atomic64_t + * + * Atomically reads the value of @ptr and returns it. + */ +u64 atomic64_read(atomic64_t *ptr) +{ + u64 curr_val; + + do { + curr_val = __atomic64_read(ptr); + } while (atomic64_cmpxchg(ptr, curr_val, curr_val) != curr_val); + + return curr_val; +} + +/** + * atomic64_add_return - add and return + * @delta: integer value to add + * @ptr: pointer to type atomic64_t + * + * Atomically adds @delta to @ptr and returns @delta + *@ptr + */ +u64 atomic64_add_return(u64 delta, atomic64_t *ptr) +{ + u64 old_val, new_val; + + do { + old_val = atomic_read(ptr); + new_val = old_val + delta; + + } while (atomic64_cmpxchg(ptr, old_val, new_val) != old_val); + + return new_val; +} + +u64 atomic64_sub_return(u64 delta, atomic64_t *ptr) +{ + return atomic64_add_return(-delta, ptr); +} + +u64 atomic64_inc_return(atomic64_t *ptr) +{ + return atomic64_add_return(1, ptr); +} + +u64 atomic64_dec_return(atomic64_t *ptr) +{ + return atomic64_sub_return(1, ptr); +} + +/** + * atomic64_add - add integer to atomic64 variable + * @delta: integer value to add + * @ptr: pointer to type atomic64_t + * + * Atomically adds @delta to @ptr. + */ +void atomic64_add(u64 delta, atomic64_t *ptr) +{ + atomic64_add_return(delta, ptr); +} + +/** + * atomic64_sub - subtract the atomic64 variable + * @delta: integer value to subtract + * @ptr: pointer to type atomic64_t + * + * Atomically subtracts @delta from @ptr. + */ +void atomic64_sub(u64 delta, atomic64_t *ptr) +{ + atomic64_add(-delta, ptr); +} + +/** + * atomic64_sub_and_test - subtract value from variable and test result + * @delta: integer value to subtract + * @ptr: pointer to type atomic64_t + * + * Atomically subtracts @delta from @ptr and returns + * true if the result is zero, or false for all + * other cases. + */ +int atomic64_sub_and_test(u64 delta, atomic64_t *ptr) +{ + u64 old_val = atomic64_sub_return(delta, ptr); + + return old_val == 0; +} + +/** + * atomic64_inc - increment atomic64 variable + * @ptr: pointer to type atomic64_t + * + * Atomically increments @ptr by 1. + */ +void atomic64_inc(atomic64_t *ptr) +{ + atomic64_add(1, ptr); +} + +/** + * atomic64_dec - decrement atomic64 variable + * @ptr: pointer to type atomic64_t + * + * Atomically decrements @ptr by 1. + */ +void atomic64_dec(atomic64_t *ptr) +{ + atomic64_sub(1, ptr); +} + +/** + * atomic64_dec_and_test - decrement and test + * @ptr: pointer to type atomic64_t + * + * Atomically decrements @ptr by 1 and + * returns true if the result is 0, or false for all other + * cases. + */ +int atomic64_dec_and_test(atomic64_t *ptr) +{ + return atomic64_sub_and_test(1, ptr); +} + +/** + * atomic64_inc_and_test - increment and test + * @ptr: pointer to type atomic64_t + * + * Atomically increments @ptr by 1 + * and returns true if the result is zero, or false for all + * other cases. + */ +int atomic64_inc_and_test(atomic64_t *ptr) +{ + return atomic64_sub_and_test(-1, ptr); +} + +/** + * atomic64_add_negative - add and test if negative + * @delta: integer value to add + * @ptr: pointer to type atomic64_t + * + * Atomically adds @delta to @ptr and returns true + * if the result is negative, or false when + * result is greater than or equal to zero. + */ +int atomic64_add_negative(u64 delta, atomic64_t *ptr) +{ + long long old_val = atomic64_add_return(delta, ptr); + + return old_val < 0; +} -- cgit v1.1 From aacf682fd8c66b57383c407eecd9d4a28264ee91 Mon Sep 17 00:00:00 2001 From: Eric Dumazet <eric.dumazet@gmail.com> Date: Fri, 3 Jul 2009 12:14:27 +0200 Subject: x86: atomic64: Improve atomic64_read() Linus noticed that the 32-bit version of atomic64_read() was being overly complex with re-reading the value and doing a retry loop over that. Instead we can just rely on cmpxchg8b returning either the new value or returning the current value. We can use any 'old' value, which will be faster as it can be loaded via immediates. Using some value that is not equal to the real value in memory the instruction gets faster. This also has the advantage that the CPU could avoid dirtying the cacheline. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: David Howells <dhowells@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> LKML-Reference: <alpine.LFD.2.01.0907021653030.3210@localhost.localdomain> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/lib/atomic64_32.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/x86/lib/atomic64_32.c b/arch/x86/lib/atomic64_32.c index d21e725..afa5d44 100644 --- a/arch/x86/lib/atomic64_32.c +++ b/arch/x86/lib/atomic64_32.c @@ -67,13 +67,9 @@ void atomic64_set(atomic64_t *ptr, u64 new_val) */ u64 atomic64_read(atomic64_t *ptr) { - u64 curr_val; + u64 old = 1LL << 32; - do { - curr_val = __atomic64_read(ptr); - } while (atomic64_cmpxchg(ptr, curr_val, curr_val) != curr_val); - - return curr_val; + return cmpxchg8b(&ptr->counter, old, old); } /** -- cgit v1.1 From 69237f94e65d3d7f539f1adb98ef68685c595004 Mon Sep 17 00:00:00 2001 From: Eric Dumazet <eric.dumazet@gmail.com> Date: Fri, 3 Jul 2009 13:26:41 +0200 Subject: x86: atomic64: Improve cmpxchg8b() Rewrite cmpxchg8b() to not use %edi register but a generic "+m" constraint, to increase compiler freedom in code generation and possibly better code. Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: David Howells <dhowells@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> LKML-Reference: <alpine.LFD.2.01.0907021653030.3210@localhost.localdomain> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/lib/atomic64_32.c | 19 +++++++------------ 1 file changed, 7 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/x86/lib/atomic64_32.c b/arch/x86/lib/atomic64_32.c index afa5d44..5fc1e2c 100644 --- a/arch/x86/lib/atomic64_32.c +++ b/arch/x86/lib/atomic64_32.c @@ -6,19 +6,14 @@ static inline u64 cmpxchg8b(u64 *ptr, u64 old, u64 new) { - asm volatile( - - LOCK_PREFIX "cmpxchg8b (%[ptr])\n" - - : "=A" (old) - - : [ptr] "D" (ptr), - "A" (old), - "b" (ll_low(new)), - "c" (ll_high(new)) - - : "memory"); + u32 low = new; + u32 high = new >> 32; + asm volatile( + LOCK_PREFIX "cmpxchg8b %1\n" + : "+A" (old), "+m" (*ptr) + : "b" (low), "c" (high) + ); return old; } -- cgit v1.1 From 824975ef190e7dcb77718d1cc2cb53769b16d918 Mon Sep 17 00:00:00 2001 From: Ingo Molnar <mingo@elte.hu> Date: Fri, 3 Jul 2009 12:39:07 +0200 Subject: x86: atomic64: Improve atomic64_add_return() Linus noted (based on Eric Dumazet's numbers) that we would probably be better off not trying an atomic_read() in atomic64_add_return() but intead intentionally let the first cmpxchg8b fail - to get a cache-friendly 'give me ownership of this cacheline' transaction. That can then be followed by the real cmpxchg8b which sets the value local to the CPU. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: David Howells <dhowells@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> LKML-Reference: <alpine.LFD.2.01.0907021653030.3210@localhost.localdomain> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/lib/atomic64_32.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86/lib/atomic64_32.c b/arch/x86/lib/atomic64_32.c index 5fc1e2c..6195962 100644 --- a/arch/x86/lib/atomic64_32.c +++ b/arch/x86/lib/atomic64_32.c @@ -76,13 +76,22 @@ u64 atomic64_read(atomic64_t *ptr) */ u64 atomic64_add_return(u64 delta, atomic64_t *ptr) { - u64 old_val, new_val; + /* + * Try first with a (probably incorrect) assumption about + * what we have there. We'll do two loops most likely, + * but we'll get an ownership MESI transaction straight away + * instead of a read transaction followed by a + * flush-for-ownership transaction: + */ + u64 old_val, new_val, real_val = 1ULL << 32; do { - old_val = atomic_read(ptr); + old_val = real_val; new_val = old_val + delta; - } while (atomic64_cmpxchg(ptr, old_val, new_val) != old_val); + real_val = atomic64_cmpxchg(ptr, old_val, new_val); + + } while (real_val != old_val); return new_val; } -- cgit v1.1 From 3ac805d2afd3fa4a07cb5bcf352fd7fa83f28935 Mon Sep 17 00:00:00 2001 From: Ingo Molnar <mingo@elte.hu> Date: Fri, 3 Jul 2009 12:51:19 +0200 Subject: x86: atomic64: Reduce size of functions cmpxchg8b is a huge instruction in terms of register footprint, we almost never want to inline it, not even within the same code module. GCC 4.3 still messes up for two functions, under-judging the true cost of this instruction - so annotate two key functions to reduce the bloat: arch/x86/lib/atomic64_32.o: text data bss dec hex filename 1763 0 0 1763 6e3 atomic64_32.o.before 435 0 0 435 1b3 atomic64_32.o.after Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: David Howells <dhowells@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> LKML-Reference: <alpine.LFD.2.01.0907021653030.3210@localhost.localdomain> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/lib/atomic64_32.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/lib/atomic64_32.c b/arch/x86/lib/atomic64_32.c index 6195962..a910238 100644 --- a/arch/x86/lib/atomic64_32.c +++ b/arch/x86/lib/atomic64_32.c @@ -4,7 +4,7 @@ #include <asm/cmpxchg.h> #include <asm/atomic.h> -static inline u64 cmpxchg8b(u64 *ptr, u64 old, u64 new) +static noinline u64 cmpxchg8b(u64 *ptr, u64 old, u64 new) { u32 low = new; u32 high = new >> 32; @@ -74,7 +74,7 @@ u64 atomic64_read(atomic64_t *ptr) * * Atomically adds @delta to @ptr and returns @delta + *@ptr */ -u64 atomic64_add_return(u64 delta, atomic64_t *ptr) +noinline u64 atomic64_add_return(u64 delta, atomic64_t *ptr) { /* * Try first with a (probably incorrect) assumption about -- cgit v1.1 From 3217120873598533234b6dedda9c371ce30001d0 Mon Sep 17 00:00:00 2001 From: Ingo Molnar <mingo@elte.hu> Date: Fri, 3 Jul 2009 13:06:01 +0200 Subject: x86: atomic64: Make atomic_read() type-safe MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Linus noticed that atomic64_xchg() uses atomic_read(), which happens to work because atomic_read() is a macro so the .counter value gets u64-read on 32-bit too - but this is really bogus and serious bugs are waiting to happen. Change atomic_read() to be a type-safe inline, and this exposes the atomic64 bogosity as well: arch/x86/lib/atomic64_32.c: In function ‘atomic64_xchg’: arch/x86/lib/atomic64_32.c:39: warning: passing argument 1 of ‘atomic_read’ from incompatible pointer type Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: David Howells <dhowells@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> LKML-Reference: <alpine.LFD.2.01.0907021653030.3210@localhost.localdomain> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/include/asm/atomic_32.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/include/asm/atomic_32.h b/arch/x86/include/asm/atomic_32.h index 311a43e..b551bb1 100644 --- a/arch/x86/include/asm/atomic_32.h +++ b/arch/x86/include/asm/atomic_32.h @@ -19,7 +19,10 @@ * * Atomically reads the value of @v. */ -#define atomic_read(v) ((v)->counter) +static inline int atomic_read(const atomic_t *v) +{ + return v->counter; +} /** * atomic_set - set atomic variable -- cgit v1.1 From 199e23780a7e75c63a9e3d1108804e3af450ea3e Mon Sep 17 00:00:00 2001 From: Ingo Molnar <mingo@elte.hu> Date: Fri, 3 Jul 2009 13:02:39 +0200 Subject: x86: atomic64: Fix unclean type use in atomic64_xchg() Linus noticed that atomic64_xchg() uses atomic_read(), which happens to work because atomic_read() is a macro so the .counter value gets u64-read on 32-bit too - but this is really bogus and serious bugs are waiting to happen. Fix atomic64_xchg() to use __atomic64_read() instead. No code changed: arch/x86/lib/atomic64_32.o: text data bss dec hex filename 435 0 0 435 1b3 atomic64_32.o.before 435 0 0 435 1b3 atomic64_32.o.after md5: bd8ab95e69c93518578bfaf0ea3be4d9 atomic64_32.o.before.asm bd8ab95e69c93518578bfaf0ea3be4d9 atomic64_32.o.after.asm Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: David Howells <dhowells@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> LKML-Reference: <alpine.LFD.2.01.0907021653030.3210@localhost.localdomain> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/lib/atomic64_32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/lib/atomic64_32.c b/arch/x86/lib/atomic64_32.c index a910238..fd28fd3 100644 --- a/arch/x86/lib/atomic64_32.c +++ b/arch/x86/lib/atomic64_32.c @@ -36,7 +36,7 @@ u64 atomic64_xchg(atomic64_t *ptr, u64 new_val) u64 old_val; do { - old_val = atomic_read(ptr); + old_val = __atomic64_read(ptr); } while (atomic64_cmpxchg(ptr, old_val, new_val) != old_val); return old_val; -- cgit v1.1 From 12b9d7ccb841805e347fec8f733f368f43ddba40 Mon Sep 17 00:00:00 2001 From: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Date: Wed, 1 Jul 2009 17:37:22 -0400 Subject: x86: Fix fixmap page order for FIX_TEXT_POKE0,1 Masami reported: > Since the fixmap pages are assigned higher address to lower, > text_poke() has to use it with inverted order (FIX_TEXT_POKE1 > to FIX_TEXT_POKE0). I prefer to just invert the order of the fixmap declaration. It's simpler and more straightforward. Backward fixmaps seems to be used by both x86 32 and 64. It's really rare but a nasty bug, because it only hurts when instructions to patch are crossing a page boundary. If this happens, the fixmap write accesses will spill on the following fixmap, which may very well crash the system. And this does not crash the system, it could leave illegal instructions in place. Thanks Masami for finding this. It seems to have crept into the 2.6.30-rc series, so this calls for a -stable inclusion. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Acked-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: <stable@kernel.org> LKML-Reference: <20090701213722.GH19926@Krystal> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/include/asm/fixmap.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h index 3eb0f79..7b2d71d 100644 --- a/arch/x86/include/asm/fixmap.h +++ b/arch/x86/include/asm/fixmap.h @@ -111,8 +111,8 @@ enum fixed_addresses { #ifdef CONFIG_PARAVIRT FIX_PARAVIRT_BOOTMAP, #endif - FIX_TEXT_POKE0, /* reserve 2 pages for text_poke() */ - FIX_TEXT_POKE1, + FIX_TEXT_POKE1, /* reserve 2 pages for text_poke() */ + FIX_TEXT_POKE0, /* first page is last, because allocation is backward */ __end_of_permanent_fixed_addresses, /* * 256 temporary boot-time mappings, used by early_ioremap(), -- cgit v1.1 From 3fd382cedfb4fb742a8cc17ba15288ec03131db1 Mon Sep 17 00:00:00 2001 From: Mike Galbraith <efault@gmx.de> Date: Thu, 2 Jul 2009 07:27:20 +0200 Subject: x86: Add missing annotation to arch/x86/lib/copy_user_64.S::copy_to_user While examining symbol generation in perf_counter tools, I noticed that copy_to_user() had no size in vmlinux's symtab. Signed-off-by: Mike Galbraith <efault@gmx.de> Acked-by: Alexander van Heukelum <heukelum@fastmail.fm> Acked-by: Cyrill Gorcunov <gorcunov@openvz.org> LKML-Reference: <1246512440.13293.3.camel@marge.simson.net> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/lib/copy_user_64.S | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/x86/lib/copy_user_64.S b/arch/x86/lib/copy_user_64.S index f118c11..6ba0f7b 100644 --- a/arch/x86/lib/copy_user_64.S +++ b/arch/x86/lib/copy_user_64.S @@ -75,6 +75,7 @@ ENTRY(copy_to_user) jae bad_to_user ALTERNATIVE_JUMP X86_FEATURE_REP_GOOD,copy_user_generic_unrolled,copy_user_generic_string CFI_ENDPROC +ENDPROC(copy_to_user) /* Standard copy_from_user with segment limit checking */ ENTRY(copy_from_user) -- cgit v1.1 From d3ac88157c1e9153f37cd2b9313117ae11735063 Mon Sep 17 00:00:00 2001 From: Rakib Mullick <rakib.mullick@gmail.com> Date: Thu, 2 Jul 2009 11:40:36 +0600 Subject: x86, kvm: Fix section mismatches in kvm.c The function paravirt_ops_setup() has been refering the variable no_timer_check, which is a __initdata. Thus generates the following warning. paravirt_ops_setup() function is called from kvm_guest_init() which is a __init function. So to fix this we mark paravirt_ops_setup as __init. The sections-check output that warned us about this was: LD arch/x86/built-in.o WARNING: arch/x86/built-in.o(.text+0x166ce): Section mismatch in reference from the function paravirt_ops_setup() to the variable .init.data:no_timer_check The function paravirt_ops_setup() references the variable __initdata no_timer_check. This is often because paravirt_ops_setup lacks a __initdata annotation or the annotation of no_timer_check is wrong. Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com> Acked-by: Avi Kivity <avi@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> LKML-Reference: <b9df5fa10907012240y356427b8ta4bd07f0efc6a049@mail.gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/kernel/kvm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/kvm.c b/arch/x86/kernel/kvm.c index a78ecad..c664d51 100644 --- a/arch/x86/kernel/kvm.c +++ b/arch/x86/kernel/kvm.c @@ -200,7 +200,7 @@ static void kvm_leave_lazy_mmu(void) state->mode = paravirt_get_lazy_mode(); } -static void paravirt_ops_setup(void) +static void __init paravirt_ops_setup(void) { pv_info.name = "KVM"; pv_info.paravirt_enabled = 1; -- cgit v1.1 From 23d0cd8e718723f1ddda37637bc6b7c34caec64a Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput <jaswinder@kernel.org> Date: Thu, 2 Jul 2009 22:33:59 +0530 Subject: x86: Remove unused variable disable_x2apic setup_nox2apic() is writing 1 to disable_x2apic but no one is reading it. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Cyrill Gorcunov <gorcunov@gmail.com> LKML-Reference: <1246554239.2242.27.camel@jaswinder.satnam> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/kernel/apic/apic.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 8c7c042..0a1c283 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -140,7 +140,6 @@ int x2apic_mode; #ifdef CONFIG_X86_X2APIC /* x2apic enabled before OS handover */ static int x2apic_preenabled; -static int disable_x2apic; static __init int setup_nox2apic(char *str) { if (x2apic_enabled()) { @@ -149,7 +148,6 @@ static __init int setup_nox2apic(char *str) return 0; } - disable_x2apic = 1; setup_clear_cpu_cap(X86_FEATURE_X2APIC); return 0; } -- cgit v1.1 From c7210e1ff8a95a0a6dba0d04a95b3ddd9d165fab Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput <jaswinder@kernel.org> Date: Thu, 2 Jul 2009 22:35:35 +0530 Subject: x86: Remove unused function lapic_watchdog_ok() lapic_watchdog_ok() is a global function but no one is using it. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <1246554335.2242.29.camel@jaswinder.satnam> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/include/asm/nmi.h | 1 - arch/x86/kernel/cpu/perfctr-watchdog.c | 5 ----- 2 files changed, 6 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/nmi.h b/arch/x86/include/asm/nmi.h index c972644..c86e5ed4 100644 --- a/arch/x86/include/asm/nmi.h +++ b/arch/x86/include/asm/nmi.h @@ -72,7 +72,6 @@ void lapic_watchdog_stop(void); int lapic_watchdog_init(unsigned nmi_hz); int lapic_wd_event(unsigned nmi_hz); unsigned lapic_adjust_nmi_hz(unsigned hz); -int lapic_watchdog_ok(void); void disable_lapic_nmi_watchdog(void); void enable_lapic_nmi_watchdog(void); void stop_nmi(void); diff --git a/arch/x86/kernel/cpu/perfctr-watchdog.c b/arch/x86/kernel/cpu/perfctr-watchdog.c index 5c481f6..e60ed74 100644 --- a/arch/x86/kernel/cpu/perfctr-watchdog.c +++ b/arch/x86/kernel/cpu/perfctr-watchdog.c @@ -803,8 +803,3 @@ int __kprobes lapic_wd_event(unsigned nmi_hz) wd_ops->rearm(wd, nmi_hz); return 1; } - -int lapic_watchdog_ok(void) -{ - return wd_ops != NULL; -} -- cgit v1.1 From 8e049ef054f1cc765f05f13e1396bb9a17c19e66 Mon Sep 17 00:00:00 2001 From: Paul Mackerras <paulus@samba.org> Date: Thu, 2 Jul 2009 08:57:12 +1000 Subject: x86: atomic64: Code atomic(64)_read and atomic(64)_set in C not CPP Occasionally we get bugs where atomic_read or atomic_set are used on atomic64_t variables or vice versa. These bugs don't generate warnings on x86 because atomic_read and atomic_set are coded as macros rather than C functions, so we don't get any type-checking on their arguments; similarly for atomic64_read and atomic64_set in 64-bit kernels. This converts them to C functions so that the arguments are type-checked and bugs like this will get caught more easily. It also converts atomic_cmpxchg and atomic_xchg, and atomic64_cmpxchg and atomic64_xchg on 64-bit, so we get type-checking on their arguments too. Compiling a typical 64-bit x86 config, this generates no new warnings, and the vmlinux text is 86 bytes smaller. Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: David Howells <dhowells@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> LKML-Reference: <alpine.LFD.2.01.0907021653030.3210@localhost.localdomain> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/include/asm/atomic_32.h | 16 ++++++++++++--- arch/x86/include/asm/atomic_64.h | 42 ++++++++++++++++++++++++++++++++-------- 2 files changed, 47 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/atomic_32.h b/arch/x86/include/asm/atomic_32.h index b551bb1..aa045de 100644 --- a/arch/x86/include/asm/atomic_32.h +++ b/arch/x86/include/asm/atomic_32.h @@ -31,7 +31,10 @@ static inline int atomic_read(const atomic_t *v) * * Atomically sets the value of @v to @i. */ -#define atomic_set(v, i) (((v)->counter) = (i)) +static inline void atomic_set(atomic_t *v, int i) +{ + v->counter = i; +} /** * atomic_add - add integer to atomic variable @@ -203,8 +206,15 @@ static inline int atomic_sub_return(int i, atomic_t *v) return atomic_add_return(-i, v); } -#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), (old), (new))) -#define atomic_xchg(v, new) (xchg(&((v)->counter), (new))) +static inline int atomic_cmpxchg(atomic_t *v, int old, int new) +{ + return cmpxchg(&v->counter, old, new); +} + +static inline int atomic_xchg(atomic_t *v, int new) +{ + return xchg(&v->counter, new); +} /** * atomic_add_unless - add unless the number is already a given value diff --git a/arch/x86/include/asm/atomic_64.h b/arch/x86/include/asm/atomic_64.h index 0d63602..d605dc2 100644 --- a/arch/x86/include/asm/atomic_64.h +++ b/arch/x86/include/asm/atomic_64.h @@ -18,7 +18,10 @@ * * Atomically reads the value of @v. */ -#define atomic_read(v) ((v)->counter) +static inline int atomic_read(const atomic_t *v) +{ + return v->counter; +} /** * atomic_set - set atomic variable @@ -27,7 +30,10 @@ * * Atomically sets the value of @v to @i. */ -#define atomic_set(v, i) (((v)->counter) = (i)) +static inline void atomic_set(atomic_t *v, int i) +{ + v->counter = i; +} /** * atomic_add - add integer to atomic variable @@ -192,7 +198,10 @@ static inline int atomic_sub_return(int i, atomic_t *v) * Atomically reads the value of @v. * Doesn't imply a read memory barrier. */ -#define atomic64_read(v) ((v)->counter) +static inline long atomic64_read(const atomic64_t *v) +{ + return v->counter; +} /** * atomic64_set - set atomic64 variable @@ -201,7 +210,10 @@ static inline int atomic_sub_return(int i, atomic_t *v) * * Atomically sets the value of @v to @i. */ -#define atomic64_set(v, i) (((v)->counter) = (i)) +static inline void atomic64_set(atomic64_t *v, long i) +{ + v->counter = i; +} /** * atomic64_add - add integer to atomic64 variable @@ -355,11 +367,25 @@ static inline long atomic64_sub_return(long i, atomic64_t *v) #define atomic64_inc_return(v) (atomic64_add_return(1, (v))) #define atomic64_dec_return(v) (atomic64_sub_return(1, (v))) -#define atomic64_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), (old), (new))) -#define atomic64_xchg(v, new) (xchg(&((v)->counter), new)) +static inline long atomic64_cmpxchg(atomic64_t *v, long old, long new) +{ + return cmpxchg(&v->counter, old, new); +} + +static inline long atomic64_xchg(atomic64_t *v, long new) +{ + return xchg(&v->counter, new); +} -#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), (old), (new))) -#define atomic_xchg(v, new) (xchg(&((v)->counter), (new))) +static inline long atomic_cmpxchg(atomic_t *v, int old, int new) +{ + return cmpxchg(&v->counter, old, new); +} + +static inline long atomic_xchg(atomic_t *v, int new) +{ + return xchg(&v->counter, new); +} /** * atomic_add_unless - add unless the number is a given value -- cgit v1.1 From 67d7178f8fc64b7f68d7dd8a1b21dfa0d42c220c Mon Sep 17 00:00:00 2001 From: Eric Dumazet <eric.dumazet@gmail.com> Date: Fri, 3 Jul 2009 13:23:02 +0200 Subject: x86: atomic64: Improve atomic64_read() Optimize atomic64_read() as a special open-coded cmpxchg8b variant. This generates nicer code: arch/x86/lib/atomic64_32.o: text data bss dec hex filename 435 0 0 435 1b3 atomic64_32.o.before 431 0 0 431 1af atomic64_32.o.after md5: bd8ab95e69c93518578bfaf0ea3be4d9 atomic64_32.o.before.asm 2bdfd4bd1f6b7b61b7fc127aef90ce3b atomic64_32.o.after.asm Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: David Howells <dhowells@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> LKML-Reference: <alpine.LFD.2.01.0907021653030.3210@localhost.localdomain> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/lib/atomic64_32.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/lib/atomic64_32.c b/arch/x86/lib/atomic64_32.c index fd28fd3..cd11803 100644 --- a/arch/x86/lib/atomic64_32.c +++ b/arch/x86/lib/atomic64_32.c @@ -62,9 +62,17 @@ void atomic64_set(atomic64_t *ptr, u64 new_val) */ u64 atomic64_read(atomic64_t *ptr) { - u64 old = 1LL << 32; + u64 res; - return cmpxchg8b(&ptr->counter, old, old); + asm volatile( + "mov %%ebx, %%eax\n\t" + "mov %%ecx, %%edx\n\t" + LOCK_PREFIX "cmpxchg8b %1\n" + : "+A" (res) + : "m" (*ptr) + ); + + return res; } /** -- cgit v1.1 From 7ca5dc145bc7daddd8aed8bbda46b74af9cebefc Mon Sep 17 00:00:00 2001 From: Florian Fainelli <florian@openwrt.org> Date: Wed, 24 Jun 2009 11:12:57 +0200 Subject: MIPS: Add support for Texas Instruments AR7 System-on-a-Chip This patch adds support for the Texas Instruments AR7 System-on-a-Chip. It supports the TNETD7100, 7200 and 7300 versions of the SoC. Signed-off-by: Matteo Croce <matteo@openwrt.org> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Eugene Konev <ejka@openwrt.org> Signed-off-by: Nicolas Thill <nico@openwrt.org> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/Kconfig | 20 + arch/mips/Makefile | 7 + arch/mips/ar7/Makefile | 10 + arch/mips/ar7/clock.c | 440 ++++++++++++ arch/mips/ar7/gpio.c | 48 ++ arch/mips/ar7/irq.c | 176 +++++ arch/mips/ar7/memory.c | 72 ++ arch/mips/ar7/platform.c | 555 +++++++++++++++ arch/mips/ar7/prom.c | 297 ++++++++ arch/mips/ar7/setup.c | 94 +++ arch/mips/ar7/time.c | 30 + arch/mips/configs/ar7_defconfig | 1182 +++++++++++++++++++++++++++++++ arch/mips/include/asm/mach-ar7/ar7.h | 178 +++++ arch/mips/include/asm/mach-ar7/gpio.h | 110 +++ arch/mips/include/asm/mach-ar7/irq.h | 16 + arch/mips/include/asm/mach-ar7/prom.h | 25 + arch/mips/include/asm/mach-ar7/spaces.h | 22 + arch/mips/include/asm/mach-ar7/war.h | 25 + 18 files changed, 3307 insertions(+) create mode 100644 arch/mips/ar7/Makefile create mode 100644 arch/mips/ar7/clock.c create mode 100644 arch/mips/ar7/gpio.c create mode 100644 arch/mips/ar7/irq.c create mode 100644 arch/mips/ar7/memory.c create mode 100644 arch/mips/ar7/platform.c create mode 100644 arch/mips/ar7/prom.c create mode 100644 arch/mips/ar7/setup.c create mode 100644 arch/mips/ar7/time.c create mode 100644 arch/mips/configs/ar7_defconfig create mode 100644 arch/mips/include/asm/mach-ar7/ar7.h create mode 100644 arch/mips/include/asm/mach-ar7/gpio.h create mode 100644 arch/mips/include/asm/mach-ar7/irq.h create mode 100644 arch/mips/include/asm/mach-ar7/prom.h create mode 100644 arch/mips/include/asm/mach-ar7/spaces.h create mode 100644 arch/mips/include/asm/mach-ar7/war.h (limited to 'arch') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 8c4be1f..b0e5511 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -22,6 +22,26 @@ choice config MACH_ALCHEMY bool "Alchemy processor based machines" +config AR7 + bool "Texas Instruments AR7" + select BOOT_ELF32 + select DMA_NONCOHERENT + select CEVT_R4K + select CSRC_R4K + select IRQ_CPU + select NO_EXCEPT_FILL + select SWAP_IO_SPACE + select SYS_HAS_CPU_MIPS32_R1 + select SYS_HAS_EARLY_PRINTK + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_LITTLE_ENDIAN + select GENERIC_GPIO + select GCD + select VLYNQ + help + Support for the Texas Instruments AR7 System-on-a-Chip + family: TNETD7100, 7200 and 7300. + config BASLER_EXCITE bool "Basler eXcite smart camera" select CEVT_R4K diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 807572a..861da51 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -173,6 +173,13 @@ libs-y += arch/mips/fw/lib/ # # +# Texas Instruments AR7 +# +core-$(CONFIG_AR7) += arch/mips/ar7/ +cflags-$(CONFIG_AR7) += -I$(srctree)/arch/mips/include/asm/mach-ar7 +load-$(CONFIG_AR7) += 0xffffffff94100000 + +# # Acer PICA 61, Mips Magnum 4000 and Olivetti M700. # core-$(CONFIG_MACH_JAZZ) += arch/mips/jazz/ diff --git a/arch/mips/ar7/Makefile b/arch/mips/ar7/Makefile new file mode 100644 index 0000000..7435e44 --- /dev/null +++ b/arch/mips/ar7/Makefile @@ -0,0 +1,10 @@ + +obj-y := \ + prom.o \ + setup.o \ + memory.o \ + irq.o \ + time.o \ + platform.o \ + gpio.o \ + clock.o diff --git a/arch/mips/ar7/clock.c b/arch/mips/ar7/clock.c new file mode 100644 index 0000000..27dc666 --- /dev/null +++ b/arch/mips/ar7/clock.c @@ -0,0 +1,440 @@ +/* + * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org> + * Copyright (C) 2007 Eugene Konev <ejka@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/gcd.h> +#include <linux/io.h> + +#include <asm/addrspace.h> +#include <asm/mach-ar7/ar7.h> + +#define BOOT_PLL_SOURCE_MASK 0x3 +#define CPU_PLL_SOURCE_SHIFT 16 +#define BUS_PLL_SOURCE_SHIFT 14 +#define USB_PLL_SOURCE_SHIFT 18 +#define DSP_PLL_SOURCE_SHIFT 22 +#define BOOT_PLL_SOURCE_AFE 0 +#define BOOT_PLL_SOURCE_BUS 0 +#define BOOT_PLL_SOURCE_REF 1 +#define BOOT_PLL_SOURCE_XTAL 2 +#define BOOT_PLL_SOURCE_CPU 3 +#define BOOT_PLL_BYPASS 0x00000020 +#define BOOT_PLL_ASYNC_MODE 0x02000000 +#define BOOT_PLL_2TO1_MODE 0x00008000 + +#define TNETD7200_CLOCK_ID_CPU 0 +#define TNETD7200_CLOCK_ID_DSP 1 +#define TNETD7200_CLOCK_ID_USB 2 + +#define TNETD7200_DEF_CPU_CLK 211000000 +#define TNETD7200_DEF_DSP_CLK 125000000 +#define TNETD7200_DEF_USB_CLK 48000000 + +struct tnetd7300_clock { + u32 ctrl; +#define PREDIV_MASK 0x001f0000 +#define PREDIV_SHIFT 16 +#define POSTDIV_MASK 0x0000001f + u32 unused1[3]; + u32 pll; +#define MUL_MASK 0x0000f000 +#define MUL_SHIFT 12 +#define PLL_MODE_MASK 0x00000001 +#define PLL_NDIV 0x00000800 +#define PLL_DIV 0x00000002 +#define PLL_STATUS 0x00000001 + u32 unused2[3]; +}; + +struct tnetd7300_clocks { + struct tnetd7300_clock bus; + struct tnetd7300_clock cpu; + struct tnetd7300_clock usb; + struct tnetd7300_clock dsp; +}; + +struct tnetd7200_clock { + u32 ctrl; + u32 unused1[3]; +#define DIVISOR_ENABLE_MASK 0x00008000 + u32 mul; + u32 prediv; + u32 postdiv; + u32 postdiv2; + u32 unused2[6]; + u32 cmd; + u32 status; + u32 cmden; + u32 padding[15]; +}; + +struct tnetd7200_clocks { + struct tnetd7200_clock cpu; + struct tnetd7200_clock dsp; + struct tnetd7200_clock usb; +}; + +int ar7_cpu_clock = 150000000; +EXPORT_SYMBOL(ar7_cpu_clock); +int ar7_bus_clock = 125000000; +EXPORT_SYMBOL(ar7_bus_clock); +int ar7_dsp_clock; +EXPORT_SYMBOL(ar7_dsp_clock); + +static void approximate(int base, int target, int *prediv, + int *postdiv, int *mul) +{ + int i, j, k, freq, res = target; + for (i = 1; i <= 16; i++) + for (j = 1; j <= 32; j++) + for (k = 1; k <= 32; k++) { + freq = abs(base / j * i / k - target); + if (freq < res) { + res = freq; + *mul = i; + *prediv = j; + *postdiv = k; + } + } +} + +static void calculate(int base, int target, int *prediv, int *postdiv, + int *mul) +{ + int tmp_gcd, tmp_base, tmp_freq; + + for (*prediv = 1; *prediv <= 32; (*prediv)++) { + tmp_base = base / *prediv; + tmp_gcd = gcd(target, tmp_base); + *mul = target / tmp_gcd; + *postdiv = tmp_base / tmp_gcd; + if ((*mul < 1) || (*mul >= 16)) + continue; + if ((*postdiv > 0) & (*postdiv <= 32)) + break; + } + + if (base / *prediv * *mul / *postdiv != target) { + approximate(base, target, prediv, postdiv, mul); + tmp_freq = base / *prediv * *mul / *postdiv; + printk(KERN_WARNING + "Adjusted requested frequency %d to %d\n", + target, tmp_freq); + } + + printk(KERN_DEBUG "Clocks: prediv: %d, postdiv: %d, mul: %d\n", + *prediv, *postdiv, *mul); +} + +static int tnetd7300_dsp_clock(void) +{ + u32 didr1, didr2; + u8 rev = ar7_chip_rev(); + didr1 = readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x18)); + didr2 = readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x1c)); + if (didr2 & (1 << 23)) + return 0; + if ((rev >= 0x23) && (rev != 0x57)) + return 250000000; + if ((((didr2 & 0x1fff) << 10) | ((didr1 & 0xffc00000) >> 22)) + > 4208000) + return 250000000; + return 0; +} + +static int tnetd7300_get_clock(u32 shift, struct tnetd7300_clock *clock, + u32 *bootcr, u32 bus_clock) +{ + int product; + int base_clock = AR7_REF_CLOCK; + u32 ctrl = readl(&clock->ctrl); + u32 pll = readl(&clock->pll); + int prediv = ((ctrl & PREDIV_MASK) >> PREDIV_SHIFT) + 1; + int postdiv = (ctrl & POSTDIV_MASK) + 1; + int divisor = prediv * postdiv; + int mul = ((pll & MUL_MASK) >> MUL_SHIFT) + 1; + + switch ((*bootcr & (BOOT_PLL_SOURCE_MASK << shift)) >> shift) { + case BOOT_PLL_SOURCE_BUS: + base_clock = bus_clock; + break; + case BOOT_PLL_SOURCE_REF: + base_clock = AR7_REF_CLOCK; + break; + case BOOT_PLL_SOURCE_XTAL: + base_clock = AR7_XTAL_CLOCK; + break; + case BOOT_PLL_SOURCE_CPU: + base_clock = ar7_cpu_clock; + break; + } + + if (*bootcr & BOOT_PLL_BYPASS) + return base_clock / divisor; + + if ((pll & PLL_MODE_MASK) == 0) + return (base_clock >> (mul / 16 + 1)) / divisor; + + if ((pll & (PLL_NDIV | PLL_DIV)) == (PLL_NDIV | PLL_DIV)) { + product = (mul & 1) ? + (base_clock * mul) >> 1 : + (base_clock * (mul - 1)) >> 2; + return product / divisor; + } + + if (mul == 16) + return base_clock / divisor; + + return base_clock * mul / divisor; +} + +static void tnetd7300_set_clock(u32 shift, struct tnetd7300_clock *clock, + u32 *bootcr, u32 frequency) +{ + int prediv, postdiv, mul; + int base_clock = ar7_bus_clock; + + switch ((*bootcr & (BOOT_PLL_SOURCE_MASK << shift)) >> shift) { + case BOOT_PLL_SOURCE_BUS: + base_clock = ar7_bus_clock; + break; + case BOOT_PLL_SOURCE_REF: + base_clock = AR7_REF_CLOCK; + break; + case BOOT_PLL_SOURCE_XTAL: + base_clock = AR7_XTAL_CLOCK; + break; + case BOOT_PLL_SOURCE_CPU: + base_clock = ar7_cpu_clock; + break; + } + + calculate(base_clock, frequency, &prediv, &postdiv, &mul); + + writel(((prediv - 1) << PREDIV_SHIFT) | (postdiv - 1), &clock->ctrl); + msleep(1); + writel(4, &clock->pll); + while (readl(&clock->pll) & PLL_STATUS) + ; + writel(((mul - 1) << MUL_SHIFT) | (0xff << 3) | 0x0e, &clock->pll); + msleep(75); +} + +static void __init tnetd7300_init_clocks(void) +{ + u32 *bootcr = (u32 *)ioremap_nocache(AR7_REGS_DCL, 4); + struct tnetd7300_clocks *clocks = + ioremap_nocache(UR8_REGS_CLOCKS, + sizeof(struct tnetd7300_clocks)); + + ar7_bus_clock = tnetd7300_get_clock(BUS_PLL_SOURCE_SHIFT, + &clocks->bus, bootcr, AR7_AFE_CLOCK); + + if (*bootcr & BOOT_PLL_ASYNC_MODE) + ar7_cpu_clock = tnetd7300_get_clock(CPU_PLL_SOURCE_SHIFT, + &clocks->cpu, bootcr, AR7_AFE_CLOCK); + else + ar7_cpu_clock = ar7_bus_clock; + + if (ar7_dsp_clock == 250000000) + tnetd7300_set_clock(DSP_PLL_SOURCE_SHIFT, &clocks->dsp, + bootcr, ar7_dsp_clock); + + iounmap(clocks); + iounmap(bootcr); +} + +static int tnetd7200_get_clock(int base, struct tnetd7200_clock *clock, + u32 *bootcr, u32 bus_clock) +{ + int divisor = ((readl(&clock->prediv) & 0x1f) + 1) * + ((readl(&clock->postdiv) & 0x1f) + 1); + + if (*bootcr & BOOT_PLL_BYPASS) + return base / divisor; + + return base * ((readl(&clock->mul) & 0xf) + 1) / divisor; +} + + +static void tnetd7200_set_clock(int base, struct tnetd7200_clock *clock, + int prediv, int postdiv, int postdiv2, int mul, u32 frequency) +{ + printk(KERN_INFO + "Clocks: base = %d, frequency = %u, prediv = %d, " + "postdiv = %d, postdiv2 = %d, mul = %d\n", + base, frequency, prediv, postdiv, postdiv2, mul); + + writel(0, &clock->ctrl); + writel(DIVISOR_ENABLE_MASK | ((prediv - 1) & 0x1F), &clock->prediv); + writel((mul - 1) & 0xF, &clock->mul); + + while (readl(&clock->status) & 0x1) + ; /* nop */ + + writel(DIVISOR_ENABLE_MASK | ((postdiv - 1) & 0x1F), &clock->postdiv); + + writel(readl(&clock->cmden) | 1, &clock->cmden); + writel(readl(&clock->cmd) | 1, &clock->cmd); + + while (readl(&clock->status) & 0x1) + ; /* nop */ + + writel(DIVISOR_ENABLE_MASK | ((postdiv2 - 1) & 0x1F), &clock->postdiv2); + + writel(readl(&clock->cmden) | 1, &clock->cmden); + writel(readl(&clock->cmd) | 1, &clock->cmd); + + while (readl(&clock->status) & 0x1) + ; /* nop */ + + writel(readl(&clock->ctrl) | 1, &clock->ctrl); +} + +static int tnetd7200_get_clock_base(int clock_id, u32 *bootcr) +{ + if (*bootcr & BOOT_PLL_ASYNC_MODE) + /* Async */ + switch (clock_id) { + case TNETD7200_CLOCK_ID_DSP: + return AR7_REF_CLOCK; + default: + return AR7_AFE_CLOCK; + } + else + /* Sync */ + if (*bootcr & BOOT_PLL_2TO1_MODE) + /* 2:1 */ + switch (clock_id) { + case TNETD7200_CLOCK_ID_DSP: + return AR7_REF_CLOCK; + default: + return AR7_AFE_CLOCK; + } + else + /* 1:1 */ + return AR7_REF_CLOCK; +} + + +static void __init tnetd7200_init_clocks(void) +{ + u32 *bootcr = (u32 *)ioremap_nocache(AR7_REGS_DCL, 4); + struct tnetd7200_clocks *clocks = + ioremap_nocache(AR7_REGS_CLOCKS, + sizeof(struct tnetd7200_clocks)); + int cpu_base, cpu_mul, cpu_prediv, cpu_postdiv; + int dsp_base, dsp_mul, dsp_prediv, dsp_postdiv; + int usb_base, usb_mul, usb_prediv, usb_postdiv; + + cpu_base = tnetd7200_get_clock_base(TNETD7200_CLOCK_ID_CPU, bootcr); + dsp_base = tnetd7200_get_clock_base(TNETD7200_CLOCK_ID_DSP, bootcr); + + if (*bootcr & BOOT_PLL_ASYNC_MODE) { + printk(KERN_INFO "Clocks: Async mode\n"); + + printk(KERN_INFO "Clocks: Setting DSP clock\n"); + calculate(dsp_base, TNETD7200_DEF_DSP_CLK, + &dsp_prediv, &dsp_postdiv, &dsp_mul); + ar7_bus_clock = + ((dsp_base / dsp_prediv) * dsp_mul) / dsp_postdiv; + tnetd7200_set_clock(dsp_base, &clocks->dsp, + dsp_prediv, dsp_postdiv * 2, dsp_postdiv, dsp_mul * 2, + ar7_bus_clock); + + printk(KERN_INFO "Clocks: Setting CPU clock\n"); + calculate(cpu_base, TNETD7200_DEF_CPU_CLK, &cpu_prediv, + &cpu_postdiv, &cpu_mul); + ar7_cpu_clock = + ((cpu_base / cpu_prediv) * cpu_mul) / cpu_postdiv; + tnetd7200_set_clock(cpu_base, &clocks->cpu, + cpu_prediv, cpu_postdiv, -1, cpu_mul, + ar7_cpu_clock); + + } else + if (*bootcr & BOOT_PLL_2TO1_MODE) { + printk(KERN_INFO "Clocks: Sync 2:1 mode\n"); + + printk(KERN_INFO "Clocks: Setting CPU clock\n"); + calculate(cpu_base, TNETD7200_DEF_CPU_CLK, &cpu_prediv, + &cpu_postdiv, &cpu_mul); + ar7_cpu_clock = ((cpu_base / cpu_prediv) * cpu_mul) + / cpu_postdiv; + tnetd7200_set_clock(cpu_base, &clocks->cpu, + cpu_prediv, cpu_postdiv, -1, cpu_mul, + ar7_cpu_clock); + + printk(KERN_INFO "Clocks: Setting DSP clock\n"); + calculate(dsp_base, TNETD7200_DEF_DSP_CLK, &dsp_prediv, + &dsp_postdiv, &dsp_mul); + ar7_bus_clock = ar7_cpu_clock / 2; + tnetd7200_set_clock(dsp_base, &clocks->dsp, + dsp_prediv, dsp_postdiv * 2, dsp_postdiv, + dsp_mul * 2, ar7_bus_clock); + } else { + printk(KERN_INFO "Clocks: Sync 1:1 mode\n"); + + printk(KERN_INFO "Clocks: Setting DSP clock\n"); + calculate(dsp_base, TNETD7200_DEF_DSP_CLK, &dsp_prediv, + &dsp_postdiv, &dsp_mul); + ar7_bus_clock = ((dsp_base / dsp_prediv) * dsp_mul) + / dsp_postdiv; + tnetd7200_set_clock(dsp_base, &clocks->dsp, + dsp_prediv, dsp_postdiv * 2, dsp_postdiv, + dsp_mul * 2, ar7_bus_clock); + + ar7_cpu_clock = ar7_bus_clock; + } + + printk(KERN_INFO "Clocks: Setting USB clock\n"); + usb_base = ar7_bus_clock; + calculate(usb_base, TNETD7200_DEF_USB_CLK, &usb_prediv, + &usb_postdiv, &usb_mul); + tnetd7200_set_clock(usb_base, &clocks->usb, + usb_prediv, usb_postdiv, -1, usb_mul, + TNETD7200_DEF_USB_CLK); + + ar7_dsp_clock = ar7_cpu_clock; + + iounmap(clocks); + iounmap(bootcr); +} + +int __init ar7_init_clocks(void) +{ + switch (ar7_chip_id()) { + case AR7_CHIP_7100: + case AR7_CHIP_7200: + tnetd7200_init_clocks(); + break; + case AR7_CHIP_7300: + ar7_dsp_clock = tnetd7300_dsp_clock(); + tnetd7300_init_clocks(); + break; + default: + break; + } + + return 0; +} +arch_initcall(ar7_init_clocks); diff --git a/arch/mips/ar7/gpio.c b/arch/mips/ar7/gpio.c new file mode 100644 index 0000000..74e14a3 --- /dev/null +++ b/arch/mips/ar7/gpio.c @@ -0,0 +1,48 @@ +/* + * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org> + * Copyright (C) 2007 Eugene Konev <ejka@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/module.h> + +#include <asm/mach-ar7/gpio.h> + +static const char *ar7_gpio_list[AR7_GPIO_MAX]; + +int gpio_request(unsigned gpio, const char *label) +{ + if (gpio >= AR7_GPIO_MAX) + return -EINVAL; + + if (ar7_gpio_list[gpio]) + return -EBUSY; + + if (label) + ar7_gpio_list[gpio] = label; + else + ar7_gpio_list[gpio] = "busy"; + + return 0; +} +EXPORT_SYMBOL(gpio_request); + +void gpio_free(unsigned gpio) +{ + BUG_ON(!ar7_gpio_list[gpio]); + ar7_gpio_list[gpio] = NULL; +} +EXPORT_SYMBOL(gpio_free); diff --git a/arch/mips/ar7/irq.c b/arch/mips/ar7/irq.c new file mode 100644 index 0000000..c781556 --- /dev/null +++ b/arch/mips/ar7/irq.c @@ -0,0 +1,176 @@ +/* + * Copyright (C) 2006,2007 Felix Fietkau <nbd@openwrt.org> + * Copyright (C) 2006,2007 Eugene Konev <ejka@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/interrupt.h> +#include <linux/io.h> + +#include <asm/irq_cpu.h> +#include <asm/mipsregs.h> +#include <asm/mach-ar7/ar7.h> + +#define EXCEPT_OFFSET 0x80 +#define PACE_OFFSET 0xA0 +#define CHNLS_OFFSET 0x200 + +#define REG_OFFSET(irq, reg) ((irq) / 32 * 0x4 + reg * 0x10) +#define SEC_REG_OFFSET(reg) (EXCEPT_OFFSET + reg * 0x8) +#define SEC_SR_OFFSET (SEC_REG_OFFSET(0)) /* 0x80 */ +#define CR_OFFSET(irq) (REG_OFFSET(irq, 1)) /* 0x10 */ +#define SEC_CR_OFFSET (SEC_REG_OFFSET(1)) /* 0x88 */ +#define ESR_OFFSET(irq) (REG_OFFSET(irq, 2)) /* 0x20 */ +#define SEC_ESR_OFFSET (SEC_REG_OFFSET(2)) /* 0x90 */ +#define ECR_OFFSET(irq) (REG_OFFSET(irq, 3)) /* 0x30 */ +#define SEC_ECR_OFFSET (SEC_REG_OFFSET(3)) /* 0x98 */ +#define PIR_OFFSET (0x40) +#define MSR_OFFSET (0x44) +#define PM_OFFSET(irq) (REG_OFFSET(irq, 5)) /* 0x50 */ +#define TM_OFFSET(irq) (REG_OFFSET(irq, 6)) /* 0x60 */ + +#define REG(addr) ((u32 *)(KSEG1ADDR(AR7_REGS_IRQ) + addr)) + +#define CHNL_OFFSET(chnl) (CHNLS_OFFSET + (chnl * 4)) + +static int ar7_irq_base; + +static void ar7_unmask_irq(unsigned int irq) +{ + writel(1 << ((irq - ar7_irq_base) % 32), + REG(ESR_OFFSET(irq - ar7_irq_base))); +} + +static void ar7_mask_irq(unsigned int irq) +{ + writel(1 << ((irq - ar7_irq_base) % 32), + REG(ECR_OFFSET(irq - ar7_irq_base))); +} + +static void ar7_ack_irq(unsigned int irq) +{ + writel(1 << ((irq - ar7_irq_base) % 32), + REG(CR_OFFSET(irq - ar7_irq_base))); +} + +static void ar7_unmask_sec_irq(unsigned int irq) +{ + writel(1 << (irq - ar7_irq_base - 40), REG(SEC_ESR_OFFSET)); +} + +static void ar7_mask_sec_irq(unsigned int irq) +{ + writel(1 << (irq - ar7_irq_base - 40), REG(SEC_ECR_OFFSET)); +} + +static void ar7_ack_sec_irq(unsigned int irq) +{ + writel(1 << (irq - ar7_irq_base - 40), REG(SEC_CR_OFFSET)); +} + +static struct irq_chip ar7_irq_type = { + .name = "AR7", + .unmask = ar7_unmask_irq, + .mask = ar7_mask_irq, + .ack = ar7_ack_irq +}; + +static struct irq_chip ar7_sec_irq_type = { + .name = "AR7", + .unmask = ar7_unmask_sec_irq, + .mask = ar7_mask_sec_irq, + .ack = ar7_ack_sec_irq, +}; + +static struct irqaction ar7_cascade_action = { + .handler = no_action, + .name = "AR7 cascade interrupt" +}; + +static void __init ar7_irq_init(int base) +{ + int i; + /* + * Disable interrupts and clear pending + */ + writel(0xffffffff, REG(ECR_OFFSET(0))); + writel(0xff, REG(ECR_OFFSET(32))); + writel(0xffffffff, REG(SEC_ECR_OFFSET)); + writel(0xffffffff, REG(CR_OFFSET(0))); + writel(0xff, REG(CR_OFFSET(32))); + writel(0xffffffff, REG(SEC_CR_OFFSET)); + + ar7_irq_base = base; + + for (i = 0; i < 40; i++) { + writel(i, REG(CHNL_OFFSET(i))); + /* Primary IRQ's */ + set_irq_chip_and_handler(base + i, &ar7_irq_type, + handle_level_irq); + /* Secondary IRQ's */ + if (i < 32) + set_irq_chip_and_handler(base + i + 40, + &ar7_sec_irq_type, + handle_level_irq); + } + + setup_irq(2, &ar7_cascade_action); + setup_irq(ar7_irq_base, &ar7_cascade_action); + set_c0_status(IE_IRQ0); +} + +void __init arch_init_irq(void) +{ + mips_cpu_irq_init(); + ar7_irq_init(8); +} + +static void ar7_cascade(void) +{ + u32 status; + int i, irq; + + /* Primary IRQ's */ + irq = readl(REG(PIR_OFFSET)) & 0x3f; + if (irq) { + do_IRQ(ar7_irq_base + irq); + return; + } + + /* Secondary IRQ's are cascaded through primary '0' */ + writel(1, REG(CR_OFFSET(irq))); + status = readl(REG(SEC_SR_OFFSET)); + for (i = 0; i < 32; i++) { + if (status & 1) { + do_IRQ(ar7_irq_base + i + 40); + return; + } + status >>= 1; + } + + spurious_interrupt(); +} + +asmlinkage void plat_irq_dispatch(void) +{ + unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM; + if (pending & STATUSF_IP7) /* cpu timer */ + do_IRQ(7); + else if (pending & STATUSF_IP2) /* int0 hardware line */ + ar7_cascade(); + else + spurious_interrupt(); +} diff --git a/arch/mips/ar7/memory.c b/arch/mips/ar7/memory.c new file mode 100644 index 0000000..46fed44 --- /dev/null +++ b/arch/mips/ar7/memory.c @@ -0,0 +1,72 @@ +/* + * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org> + * Copyright (C) 2007 Eugene Konev <ejka@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include <linux/bootmem.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/pfn.h> +#include <linux/proc_fs.h> +#include <linux/string.h> +#include <linux/swap.h> + +#include <asm/bootinfo.h> +#include <asm/page.h> +#include <asm/sections.h> + +#include <asm/mach-ar7/ar7.h> +#include <asm/mips-boards/prom.h> + +static int __init memsize(void) +{ + u32 size = (64 << 20); + u32 *addr = (u32 *)KSEG1ADDR(AR7_SDRAM_BASE + size - 4); + u32 *kernel_end = (u32 *)KSEG1ADDR(CPHYSADDR((u32)&_end)); + u32 *tmpaddr = addr; + + while (tmpaddr > kernel_end) { + *tmpaddr = (u32)tmpaddr; + size >>= 1; + tmpaddr -= size >> 2; + } + + do { + tmpaddr += size >> 2; + if (*tmpaddr != (u32)tmpaddr) + break; + size <<= 1; + } while (size < (64 << 20)); + + writel(tmpaddr, &addr); + + return size; +} + +void __init prom_meminit(void) +{ + unsigned long pages; + + pages = memsize() >> PAGE_SHIFT; + add_memory_region(PHYS_OFFSET, pages << PAGE_SHIFT, + BOOT_MEM_RAM); +} + +void __init prom_free_prom_memory(void) +{ + /* Nothing to free */ +} diff --git a/arch/mips/ar7/platform.c b/arch/mips/ar7/platform.c new file mode 100644 index 0000000..5422449 --- /dev/null +++ b/arch/mips/ar7/platform.c @@ -0,0 +1,555 @@ +/* + * Copyright (C) 2006,2007 Felix Fietkau <nbd@openwrt.org> + * Copyright (C) 2006,2007 Eugene Konev <ejka@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/init.h> +#include <linux/types.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/platform_device.h> +#include <linux/mtd/physmap.h> +#include <linux/serial.h> +#include <linux/serial_8250.h> +#include <linux/ioport.h> +#include <linux/io.h> +#include <linux/version.h> +#include <linux/vlynq.h> +#include <linux/leds.h> +#include <linux/string.h> +#include <linux/etherdevice.h> + +#include <asm/addrspace.h> +#include <asm/mach-ar7/ar7.h> +#include <asm/mach-ar7/gpio.h> +#include <asm/mach-ar7/prom.h> + +struct plat_vlynq_data { + struct plat_vlynq_ops ops; + int gpio_bit; + int reset_bit; +}; + + +static int vlynq_on(struct vlynq_device *dev) +{ + int result; + struct plat_vlynq_data *pdata = dev->dev.platform_data; + + result = gpio_request(pdata->gpio_bit, "vlynq"); + if (result) + goto out; + + ar7_device_reset(pdata->reset_bit); + + result = ar7_gpio_disable(pdata->gpio_bit); + if (result) + goto out_enabled; + + result = ar7_gpio_enable(pdata->gpio_bit); + if (result) + goto out_enabled; + + result = gpio_direction_output(pdata->gpio_bit, 0); + if (result) + goto out_gpio_enabled; + + msleep(50); + + gpio_set_value(pdata->gpio_bit, 1); + msleep(50); + + return 0; + +out_gpio_enabled: + ar7_gpio_disable(pdata->gpio_bit); +out_enabled: + ar7_device_disable(pdata->reset_bit); + gpio_free(pdata->gpio_bit); +out: + return result; +} + +static void vlynq_off(struct vlynq_device *dev) +{ + struct plat_vlynq_data *pdata = dev->dev.platform_data; + ar7_gpio_disable(pdata->gpio_bit); + gpio_free(pdata->gpio_bit); + ar7_device_disable(pdata->reset_bit); +} + +static struct resource physmap_flash_resource = { + .name = "mem", + .flags = IORESOURCE_MEM, + .start = 0x10000000, + .end = 0x107fffff, +}; + +static struct resource cpmac_low_res[] = { + { + .name = "regs", + .flags = IORESOURCE_MEM, + .start = AR7_REGS_MAC0, + .end = AR7_REGS_MAC0 + 0x7ff, + }, + { + .name = "irq", + .flags = IORESOURCE_IRQ, + .start = 27, + .end = 27, + }, +}; + +static struct resource cpmac_high_res[] = { + { + .name = "regs", + .flags = IORESOURCE_MEM, + .start = AR7_REGS_MAC1, + .end = AR7_REGS_MAC1 + 0x7ff, + }, + { + .name = "irq", + .flags = IORESOURCE_IRQ, + .start = 41, + .end = 41, + }, +}; + +static struct resource vlynq_low_res[] = { + { + .name = "regs", + .flags = IORESOURCE_MEM, + .start = AR7_REGS_VLYNQ0, + .end = AR7_REGS_VLYNQ0 + 0xff, + }, + { + .name = "irq", + .flags = IORESOURCE_IRQ, + .start = 29, + .end = 29, + }, + { + .name = "mem", + .flags = IORESOURCE_MEM, + .start = 0x04000000, + .end = 0x04ffffff, + }, + { + .name = "devirq", + .flags = IORESOURCE_IRQ, + .start = 80, + .end = 111, + }, +}; + +static struct resource vlynq_high_res[] = { + { + .name = "regs", + .flags = IORESOURCE_MEM, + .start = AR7_REGS_VLYNQ1, + .end = AR7_REGS_VLYNQ1 + 0xff, + }, + { + .name = "irq", + .flags = IORESOURCE_IRQ, + .start = 33, + .end = 33, + }, + { + .name = "mem", + .flags = IORESOURCE_MEM, + .start = 0x0c000000, + .end = 0x0cffffff, + }, + { + .name = "devirq", + .flags = IORESOURCE_IRQ, + .start = 112, + .end = 143, + }, +}; + +static struct resource usb_res[] = { + { + .name = "regs", + .flags = IORESOURCE_MEM, + .start = AR7_REGS_USB, + .end = AR7_REGS_USB + 0xff, + }, + { + .name = "irq", + .flags = IORESOURCE_IRQ, + .start = 32, + .end = 32, + }, + { + .name = "mem", + .flags = IORESOURCE_MEM, + .start = 0x03400000, + .end = 0x034001fff, + }, +}; + +static struct physmap_flash_data physmap_flash_data = { + .width = 2, +}; + +static struct plat_cpmac_data cpmac_low_data = { + .reset_bit = 17, + .power_bit = 20, + .phy_mask = 0x80000000, +}; + +static struct plat_cpmac_data cpmac_high_data = { + .reset_bit = 21, + .power_bit = 22, + .phy_mask = 0x7fffffff, +}; + +static struct plat_vlynq_data vlynq_low_data = { + .ops.on = vlynq_on, + .ops.off = vlynq_off, + .reset_bit = 20, + .gpio_bit = 18, +}; + +static struct plat_vlynq_data vlynq_high_data = { + .ops.on = vlynq_on, + .ops.off = vlynq_off, + .reset_bit = 16, + .gpio_bit = 19, +}; + +static struct platform_device physmap_flash = { + .id = 0, + .name = "physmap-flash", + .dev.platform_data = &physmap_flash_data, + .resource = &physmap_flash_resource, + .num_resources = 1, +}; + +static u64 cpmac_dma_mask = DMA_32BIT_MASK; +static struct platform_device cpmac_low = { + .id = 0, + .name = "cpmac", + .dev = { + .dma_mask = &cpmac_dma_mask, + .coherent_dma_mask = DMA_32BIT_MASK, + .platform_data = &cpmac_low_data, + }, + .resource = cpmac_low_res, + .num_resources = ARRAY_SIZE(cpmac_low_res), +}; + +static struct platform_device cpmac_high = { + .id = 1, + .name = "cpmac", + .dev = { + .dma_mask = &cpmac_dma_mask, + .coherent_dma_mask = DMA_32BIT_MASK, + .platform_data = &cpmac_high_data, + }, + .resource = cpmac_high_res, + .num_resources = ARRAY_SIZE(cpmac_high_res), +}; + +static struct platform_device vlynq_low = { + .id = 0, + .name = "vlynq", + .dev.platform_data = &vlynq_low_data, + .resource = vlynq_low_res, + .num_resources = ARRAY_SIZE(vlynq_low_res), +}; + +static struct platform_device vlynq_high = { + .id = 1, + .name = "vlynq", + .dev.platform_data = &vlynq_high_data, + .resource = vlynq_high_res, + .num_resources = ARRAY_SIZE(vlynq_high_res), +}; + + +static struct gpio_led default_leds[] = { + { + .name = "status", + .gpio = 8, + .active_low = 1, + }, +}; + +static struct gpio_led dsl502t_leds[] = { + { + .name = "status", + .gpio = 9, + .active_low = 1, + }, + { + .name = "ethernet", + .gpio = 7, + .active_low = 1, + }, + { + .name = "usb", + .gpio = 12, + .active_low = 1, + }, +}; + +static struct gpio_led dg834g_leds[] = { + { + .name = "ppp", + .gpio = 6, + .active_low = 1, + }, + { + .name = "status", + .gpio = 7, + .active_low = 1, + }, + { + .name = "adsl", + .gpio = 8, + .active_low = 1, + }, + { + .name = "wifi", + .gpio = 12, + .active_low = 1, + }, + { + .name = "power", + .gpio = 14, + .active_low = 1, + .default_trigger = "default-on", + }, +}; + +static struct gpio_led fb_sl_leds[] = { + { + .name = "1", + .gpio = 7, + }, + { + .name = "2", + .gpio = 13, + .active_low = 1, + }, + { + .name = "3", + .gpio = 10, + .active_low = 1, + }, + { + .name = "4", + .gpio = 12, + .active_low = 1, + }, + { + .name = "5", + .gpio = 9, + .active_low = 1, + }, +}; + +static struct gpio_led fb_fon_leds[] = { + { + .name = "1", + .gpio = 8, + }, + { + .name = "2", + .gpio = 3, + .active_low = 1, + }, + { + .name = "3", + .gpio = 5, + }, + { + .name = "4", + .gpio = 4, + .active_low = 1, + }, + { + .name = "5", + .gpio = 11, + .active_low = 1, + }, +}; + +static struct gpio_led_platform_data ar7_led_data; + +static struct platform_device ar7_gpio_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &ar7_led_data, + } +}; + +static struct platform_device ar7_udc = { + .id = -1, + .name = "ar7_udc", + .resource = usb_res, + .num_resources = ARRAY_SIZE(usb_res), +}; + +static inline unsigned char char2hex(char h) +{ + switch (h) { + case '0': case '1': case '2': case '3': case '4': + case '5': case '6': case '7': case '8': case '9': + return h - '0'; + case 'A': case 'B': case 'C': case 'D': case 'E': case 'F': + return h - 'A' + 10; + case 'a': case 'b': case 'c': case 'd': case 'e': case 'f': + return h - 'a' + 10; + default: + return 0; + } +} + +static void cpmac_get_mac(int instance, unsigned char *dev_addr) +{ + int i; + char name[5], default_mac[ETH_ALEN], *mac; + + mac = NULL; + sprintf(name, "mac%c", 'a' + instance); + mac = prom_getenv(name); + if (!mac) { + sprintf(name, "mac%c", 'a'); + mac = prom_getenv(name); + } + if (!mac) { + random_ether_addr(default_mac); + mac = default_mac; + } + for (i = 0; i < 6; i++) + dev_addr[i] = (char2hex(mac[i * 3]) << 4) + + char2hex(mac[i * 3 + 1]); +} + +static void __init detect_leds(void) +{ + char *prid, *usb_prod; + + /* Default LEDs */ + ar7_led_data.num_leds = ARRAY_SIZE(default_leds); + ar7_led_data.leds = default_leds; + + /* FIXME: the whole thing is unreliable */ + prid = prom_getenv("ProductID"); + usb_prod = prom_getenv("usb_prod"); + + /* If we can't get the product id from PROM, use the default LEDs */ + if (!prid) + return; + + if (strstr(prid, "Fritz_Box_FON")) { + ar7_led_data.num_leds = ARRAY_SIZE(fb_fon_leds); + ar7_led_data.leds = fb_fon_leds; + } else if (strstr(prid, "Fritz_Box_")) { + ar7_led_data.num_leds = ARRAY_SIZE(fb_sl_leds); + ar7_led_data.leds = fb_sl_leds; + } else if ((!strcmp(prid, "AR7RD") || !strcmp(prid, "AR7DB")) + && usb_prod != NULL && strstr(usb_prod, "DSL-502T")) { + ar7_led_data.num_leds = ARRAY_SIZE(dsl502t_leds); + ar7_led_data.leds = dsl502t_leds; + } else if (strstr(prid, "DG834")) { + ar7_led_data.num_leds = ARRAY_SIZE(dg834g_leds); + ar7_led_data.leds = dg834g_leds; + } +} + +static int __init ar7_register_devices(void) +{ + int res; + static struct uart_port uart_port[2]; + + memset(uart_port, 0, sizeof(struct uart_port) * 2); + + uart_port[0].type = PORT_16550A; + uart_port[0].line = 0; + uart_port[0].irq = AR7_IRQ_UART0; + uart_port[0].uartclk = ar7_bus_freq() / 2; + uart_port[0].iotype = UPIO_MEM32; + uart_port[0].mapbase = AR7_REGS_UART0; + uart_port[0].membase = ioremap(uart_port[0].mapbase, 256); + uart_port[0].regshift = 2; + res = early_serial_setup(&uart_port[0]); + if (res) + return res; + + + /* Only TNETD73xx have a second serial port */ + if (ar7_has_second_uart()) { + uart_port[1].type = PORT_16550A; + uart_port[1].line = 1; + uart_port[1].irq = AR7_IRQ_UART1; + uart_port[1].uartclk = ar7_bus_freq() / 2; + uart_port[1].iotype = UPIO_MEM32; + uart_port[1].mapbase = UR8_REGS_UART1; + uart_port[1].membase = ioremap(uart_port[1].mapbase, 256); + uart_port[1].regshift = 2; + res = early_serial_setup(&uart_port[1]); + if (res) + return res; + } + + res = platform_device_register(&physmap_flash); + if (res) + return res; + + ar7_device_disable(vlynq_low_data.reset_bit); + res = platform_device_register(&vlynq_low); + if (res) + return res; + + if (ar7_has_high_vlynq()) { + ar7_device_disable(vlynq_high_data.reset_bit); + res = platform_device_register(&vlynq_high); + if (res) + return res; + } + + if (ar7_has_high_cpmac()) { + cpmac_get_mac(1, cpmac_high_data.dev_addr); + res = platform_device_register(&cpmac_high); + if (res) + return res; + } else { + cpmac_low_data.phy_mask = 0xffffffff; + } + + cpmac_get_mac(0, cpmac_low_data.dev_addr); + res = platform_device_register(&cpmac_low); + if (res) + return res; + + detect_leds(); + res = platform_device_register(&ar7_gpio_leds); + if (res) + return res; + + res = platform_device_register(&ar7_udc); + + return res; +} +arch_initcall(ar7_register_devices); diff --git a/arch/mips/ar7/prom.c b/arch/mips/ar7/prom.c new file mode 100644 index 0000000..a320bce --- /dev/null +++ b/arch/mips/ar7/prom.c @@ -0,0 +1,297 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * Putting things on the screen/serial line using YAMONs facilities. + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/serial_reg.h> +#include <linux/spinlock.h> +#include <linux/module.h> +#include <linux/string.h> +#include <linux/io.h> +#include <asm/bootinfo.h> + +#include <asm/mach-ar7/ar7.h> +#include <asm/mach-ar7/prom.h> + +#define MAX_ENTRY 80 + +struct env_var { + char *name; + char *value; +}; + +static struct env_var adam2_env[MAX_ENTRY]; + +char *prom_getenv(const char *name) +{ + int i; + for (i = 0; (i < MAX_ENTRY) && adam2_env[i].name; i++) + if (!strcmp(name, adam2_env[i].name)) + return adam2_env[i].value; + + return NULL; +} +EXPORT_SYMBOL(prom_getenv); + +char * __init prom_getcmdline(void) +{ + return &(arcs_cmdline[0]); +} + +static void __init ar7_init_cmdline(int argc, char *argv[]) +{ + char *cp; + int actr; + + actr = 1; /* Always ignore argv[0] */ + + cp = &(arcs_cmdline[0]); + while (actr < argc) { + strcpy(cp, argv[actr]); + cp += strlen(argv[actr]); + *cp++ = ' '; + actr++; + } + if (cp != &(arcs_cmdline[0])) { + /* get rid of trailing space */ + --cp; + *cp = '\0'; + } +} + +struct psbl_rec { + u32 psbl_size; + u32 env_base; + u32 env_size; + u32 ffs_base; + u32 ffs_size; +}; + +static __initdata char psp_env_version[] = "TIENV0.8"; + +struct psp_env_chunk { + u8 num; + u8 ctrl; + u16 csum; + u8 len; + char data[11]; +} __attribute__ ((packed)); + +struct psp_var_map_entry { + u8 num; + char *value; +}; + +static struct psp_var_map_entry psp_var_map[] = { + { 1, "cpufrequency" }, + { 2, "memsize" }, + { 3, "flashsize" }, + { 4, "modetty0" }, + { 5, "modetty1" }, + { 8, "maca" }, + { 9, "macb" }, + { 28, "sysfrequency" }, + { 38, "mipsfrequency" }, +}; + +/* + +Well-known variable (num is looked up in table above for matching variable name) +Example: cpufrequency=211968000 ++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+--- +| 01 |CTRL|CHECKSUM | 01 | _2 | _1 | _1 | _9 | _6 | _8 | _0 | _0 | _0 | \0 | FF ++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+--- + +Name=Value pair in a single chunk +Example: NAME=VALUE ++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+--- +| 00 |CTRL|CHECKSUM | 01 | _N | _A | _M | _E | _0 | _V | _A | _L | _U | _E | \0 ++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+--- + +Name=Value pair in 2 chunks (len is the number of chunks) +Example: bootloaderVersion=1.3.7.15 ++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+--- +| 00 |CTRL|CHECKSUM | 02 | _b | _o | _o | _t | _l | _o | _a | _d | _e | _r | _V ++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+--- +| _e | _r | _s | _i | _o | _n | \0 | _1 | _. | _3 | _. | _7 | _. | _1 | _5 | \0 ++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+--- + +Data is padded with 0xFF + +*/ + +#define PSP_ENV_SIZE 4096 + +static char psp_env_data[PSP_ENV_SIZE] = { 0, }; + +static char * __init lookup_psp_var_map(u8 num) +{ + int i; + + for (i = 0; i < sizeof(psp_var_map); i++) + if (psp_var_map[i].num == num) + return psp_var_map[i].value; + + return NULL; +} + +static void __init add_adam2_var(char *name, char *value) +{ + int i; + for (i = 0; i < MAX_ENTRY; i++) { + if (!adam2_env[i].name) { + adam2_env[i].name = name; + adam2_env[i].value = value; + return; + } else if (!strcmp(adam2_env[i].name, name)) { + adam2_env[i].value = value; + return; + } + } +} + +static int __init parse_psp_env(void *psp_env_base) +{ + int i, n; + char *name, *value; + struct psp_env_chunk *chunks = (struct psp_env_chunk *)psp_env_data; + + memcpy_fromio(chunks, psp_env_base, PSP_ENV_SIZE); + + i = 1; + n = PSP_ENV_SIZE / sizeof(struct psp_env_chunk); + while (i < n) { + if ((chunks[i].num == 0xff) || ((i + chunks[i].len) > n)) + break; + value = chunks[i].data; + if (chunks[i].num) { + name = lookup_psp_var_map(chunks[i].num); + } else { + name = value; + value += strlen(name) + 1; + } + if (name) + add_adam2_var(name, value); + i += chunks[i].len; + } + return 0; +} + +static void __init ar7_init_env(struct env_var *env) +{ + int i; + struct psbl_rec *psbl = (struct psbl_rec *)(KSEG1ADDR(0x14000300)); + void *psp_env = (void *)KSEG1ADDR(psbl->env_base); + + if (strcmp(psp_env, psp_env_version) == 0) { + parse_psp_env(psp_env); + } else { + for (i = 0; i < MAX_ENTRY; i++, env++) + if (env->name) + add_adam2_var(env->name, env->value); + } +} + +static void __init console_config(void) +{ +#ifdef CONFIG_SERIAL_8250_CONSOLE + char console_string[40]; + int baud = 0; + char parity = '\0', bits = '\0', flow = '\0'; + char *s, *p; + + if (strstr(prom_getcmdline(), "console=")) + return; + +#ifdef CONFIG_KGDB + if (!strstr(prom_getcmdline(), "nokgdb")) { + strcat(prom_getcmdline(), " console=kgdb"); + kgdb_enabled = 1; + return; + } +#endif + + s = prom_getenv("modetty0"); + if (s) { + baud = simple_strtoul(s, &p, 10); + s = p; + if (*s == ',') + s++; + if (*s) + parity = *s++; + if (*s == ',') + s++; + if (*s) + bits = *s++; + if (*s == ',') + s++; + if (*s == 'h') + flow = 'r'; + } + + if (baud == 0) + baud = 38400; + if (parity != 'n' && parity != 'o' && parity != 'e') + parity = 'n'; + if (bits != '7' && bits != '8') + bits = '8'; + + if (flow == 'r') + sprintf(console_string, " console=ttyS0,%d%c%c%c", baud, + parity, bits, flow); + else + sprintf(console_string, " console=ttyS0,%d%c%c", baud, parity, + bits); + strcat(prom_getcmdline(), console_string); +#endif +} + +void __init prom_init(void) +{ + ar7_init_cmdline(fw_arg0, (char **)fw_arg1); + ar7_init_env((struct env_var *)fw_arg2); + console_config(); +} + +#define PORT(offset) (KSEG1ADDR(AR7_REGS_UART0 + (offset * 4))) +static inline unsigned int serial_in(int offset) +{ + return readl((void *)PORT(offset)); +} + +static inline void serial_out(int offset, int value) +{ + writel(value, (void *)PORT(offset)); +} + +char prom_getchar(void) +{ + while (!(serial_in(UART_LSR) & UART_LSR_DR)) + ; + return serial_in(UART_RX); +} + +int prom_putchar(char c) +{ + while ((serial_in(UART_LSR) & UART_LSR_TEMT) == 0) + ; + serial_out(UART_TX, c); + return 1; +} + diff --git a/arch/mips/ar7/setup.c b/arch/mips/ar7/setup.c new file mode 100644 index 0000000..6ebb5f1 --- /dev/null +++ b/arch/mips/ar7/setup.c @@ -0,0 +1,94 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + */ +#include <linux/version.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/pm.h> +#include <linux/time.h> + +#include <asm/reboot.h> +#include <asm/mach-ar7/ar7.h> +#include <asm/mach-ar7/prom.h> + +static void ar7_machine_restart(char *command) +{ + u32 *softres_reg = ioremap(AR7_REGS_RESET + + AR7_RESET_SOFTWARE, 1); + writel(1, softres_reg); +} + +static void ar7_machine_halt(void) +{ + while (1) + ; +} + +static void ar7_machine_power_off(void) +{ + u32 *power_reg = (u32 *)ioremap(AR7_REGS_POWER, 1); + u32 power_state = readl(power_reg) | (3 << 30); + writel(power_state, power_reg); + ar7_machine_halt(); +} + +const char *get_system_type(void) +{ + u16 chip_id = ar7_chip_id(); + switch (chip_id) { + case AR7_CHIP_7300: + return "TI AR7 (TNETD7300)"; + case AR7_CHIP_7100: + return "TI AR7 (TNETD7100)"; + case AR7_CHIP_7200: + return "TI AR7 (TNETD7200)"; + default: + return "TI AR7 (Unknown)"; + } +} + +static int __init ar7_init_console(void) +{ + return 0; +} +console_initcall(ar7_init_console); + +/* + * Initializes basic routines and structures pointers, memory size (as + * given by the bios and saves the command line. + */ + +void __init plat_mem_setup(void) +{ + unsigned long io_base; + + _machine_restart = ar7_machine_restart; + _machine_halt = ar7_machine_halt; + pm_power_off = ar7_machine_power_off; + panic_timeout = 3; + + io_base = (unsigned long)ioremap(AR7_REGS_BASE, 0x10000); + if (!io_base) + panic("Can't remap IO base!\n"); + set_io_port_base(io_base); + + prom_meminit(); + + printk(KERN_INFO "%s, ID: 0x%04x, Revision: 0x%02x\n", + get_system_type(), + ar7_chip_id(), ar7_chip_rev()); +} diff --git a/arch/mips/ar7/time.c b/arch/mips/ar7/time.c new file mode 100644 index 0000000..a1fba89 --- /dev/null +++ b/arch/mips/ar7/time.c @@ -0,0 +1,30 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * Setting up the clock on the MIPS boards. + */ + +#include <linux/init.h> +#include <linux/time.h> + +#include <asm/time.h> +#include <asm/mach-ar7/ar7.h> + +void __init plat_time_init(void) +{ + mips_hpt_frequency = ar7_cpu_freq() / 2; +} diff --git a/arch/mips/configs/ar7_defconfig b/arch/mips/configs/ar7_defconfig new file mode 100644 index 0000000..dad5b67 --- /dev/null +++ b/arch/mips/configs/ar7_defconfig @@ -0,0 +1,1182 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.30 +# Wed Jun 24 14:08:59 2009 +# +CONFIG_MIPS=y + +# +# Machine selection +# +# CONFIG_MACH_ALCHEMY is not set +CONFIG_AR7=y +# CONFIG_BASLER_EXCITE is not set +# CONFIG_BCM47XX is not set +# CONFIG_MIPS_COBALT is not set +# CONFIG_MACH_DECSTATION is not set +# CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set +# CONFIG_LEMOTE_FULONG is not set +# CONFIG_MIPS_MALTA is not set +# CONFIG_MIPS_SIM is not set +# CONFIG_NEC_MARKEINS is not set +# CONFIG_MACH_VR41XX is not set +# CONFIG_NXP_STB220 is not set +# CONFIG_NXP_STB225 is not set +# CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set +# CONFIG_PMC_MSP is not set +# CONFIG_PMC_YOSEMITE is not set +# CONFIG_SGI_IP22 is not set +# CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set +# CONFIG_SGI_IP32 is not set +# CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CARMEL is not set +# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_RHONE is not set +# CONFIG_SIBYTE_SWARM is not set +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_SENTOSA is not set +# CONFIG_SIBYTE_BIGSUR is not set +# CONFIG_SNI_RM is not set +# CONFIG_MACH_TX39XX is not set +# CONFIG_MACH_TX49XX is not set +# CONFIG_MIKROTIK_RB532 is not set +# CONFIG_WR_PPMC is not set +# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set +# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set +# CONFIG_ALCHEMY_GPIO_INDIRECT is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_CEVT_R4K_LIB=y +CONFIG_CEVT_R4K=y +CONFIG_CSRC_R4K_LIB=y +CONFIG_CSRC_R4K=y +CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NEED_PCI_MAP_STATE=y +CONFIG_EARLY_PRINTK=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +# CONFIG_HOTPLUG_CPU is not set +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_GPIO=y +# CONFIG_CPU_BIG_ENDIAN is not set +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y +CONFIG_IRQ_CPU=y +CONFIG_NO_EXCEPT_FILL=y +CONFIG_SWAP_IO_SPACE=y +CONFIG_BOOT_ELF32=y +CONFIG_MIPS_L1_CACHE_SHIFT=5 + +# +# CPU selection +# +# CONFIG_CPU_LOONGSON2 is not set +CONFIG_CPU_MIPS32_R1=y +# CONFIG_CPU_MIPS32_R2 is not set +# CONFIG_CPU_MIPS64_R1 is not set +# CONFIG_CPU_MIPS64_R2 is not set +# CONFIG_CPU_R3000 is not set +# CONFIG_CPU_TX39XX is not set +# CONFIG_CPU_VR41XX is not set +# CONFIG_CPU_R4300 is not set +# CONFIG_CPU_R4X00 is not set +# CONFIG_CPU_TX49XX is not set +# CONFIG_CPU_R5000 is not set +# CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R5500 is not set +# CONFIG_CPU_R6000 is not set +# CONFIG_CPU_NEVADA is not set +# CONFIG_CPU_R8000 is not set +# CONFIG_CPU_R10000 is not set +# CONFIG_CPU_RM7000 is not set +# CONFIG_CPU_RM9000 is not set +# CONFIG_CPU_SB1 is not set +# CONFIG_CPU_CAVIUM_OCTEON is not set +CONFIG_SYS_HAS_CPU_MIPS32_R1=y +CONFIG_CPU_MIPS32=y +CONFIG_CPU_MIPSR1=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_HARDWARE_WATCHPOINTS=y + +# +# Kernel type +# +CONFIG_32BIT=y +# CONFIG_64BIT is not set +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_32KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_CPU_HAS_PREFETCH=y +CONFIG_MIPS_MT_DISABLED=y +# CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set +CONFIG_CPU_HAS_LLSC=y +CONFIG_CPU_HAS_SYNC=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_48 is not set +CONFIG_HZ_100=y +# CONFIG_HZ_128 is not set +# CONFIG_HZ_250 is not set +# CONFIG_HZ_256 is not set +# CONFIG_HZ_1000 is not set +# CONFIG_HZ_1024 is not set +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_HZ=100 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_KEXEC=y +# CONFIG_SECCOMP is not set +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_RELAY=y +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +CONFIG_RD_LZMA=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +# CONFIG_KALLSYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +# CONFIG_ELF_CORE is not set +# CONFIG_PCSPKR_PLATFORM is not set +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Performance Counters +# +# CONFIG_VM_EVENT_COUNTERS is not set +CONFIG_STRIP_ASM_SYMS=y +# CONFIG_COMPAT_BRK is not set +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +CONFIG_DEFAULT_DEADLINE=y +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="deadline" +CONFIG_PROBE_INITRD_HEADER=y +# CONFIG_FREEZER is not set + +# +# Bus options (PCI, PCMCIA, EISA, ISA, TC) +# +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_MMU=y +# CONFIG_PCCARD is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_HAVE_AOUT is not set +# CONFIG_BINFMT_MISC is not set +CONFIG_TRAD_SIGNALS=y + +# +# Power management options +# +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_PM is not set +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +CONFIG_IP_MROUTE=y +# CONFIG_IP_PIMSM_V1 is not set +# CONFIG_IP_PIMSM_V2 is not set +CONFIG_ARPD=y +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +CONFIG_TCP_CONG_ADVANCED=y +# CONFIG_TCP_CONG_BIC is not set +# CONFIG_TCP_CONG_CUBIC is not set +CONFIG_TCP_CONG_WESTWOOD=y +# CONFIG_TCP_CONG_HTCP is not set +# CONFIG_TCP_CONG_HSTCP is not set +# CONFIG_TCP_CONG_HYBLA is not set +# CONFIG_TCP_CONG_VEGAS is not set +# CONFIG_TCP_CONG_SCALABLE is not set +# CONFIG_TCP_CONG_LP is not set +# CONFIG_TCP_CONG_VENO is not set +# CONFIG_TCP_CONG_YEAH is not set +# CONFIG_TCP_CONG_ILLINOIS is not set +# CONFIG_DEFAULT_BIC is not set +# CONFIG_DEFAULT_CUBIC is not set +# CONFIG_DEFAULT_HTCP is not set +# CONFIG_DEFAULT_VEGAS is not set +CONFIG_DEFAULT_WESTWOOD=y +# CONFIG_DEFAULT_RENO is not set +CONFIG_DEFAULT_TCP_CONG="westwood" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y +# CONFIG_BRIDGE_NETFILTER is not set + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set +CONFIG_NF_CONNTRACK=m +# CONFIG_NF_CT_ACCT is not set +CONFIG_NF_CONNTRACK_MARK=y +# CONFIG_NF_CONNTRACK_EVENTS is not set +# CONFIG_NF_CT_PROTO_DCCP is not set +# CONFIG_NF_CT_PROTO_SCTP is not set +# CONFIG_NF_CT_PROTO_UDPLITE is not set +# CONFIG_NF_CONNTRACK_AMANDA is not set +CONFIG_NF_CONNTRACK_FTP=m +# CONFIG_NF_CONNTRACK_H323 is not set +CONFIG_NF_CONNTRACK_IRC=m +# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set +# CONFIG_NF_CONNTRACK_PPTP is not set +# CONFIG_NF_CONNTRACK_SANE is not set +# CONFIG_NF_CONNTRACK_SIP is not set +CONFIG_NF_CONNTRACK_TFTP=m +# CONFIG_NF_CT_NETLINK is not set +# CONFIG_NETFILTER_TPROXY is not set +CONFIG_NETFILTER_XTABLES=m +# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set +# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +# CONFIG_NETFILTER_XT_TARGET_HL is not set +# CONFIG_NETFILTER_XT_TARGET_LED is not set +# CONFIG_NETFILTER_XT_TARGET_MARK is not set +# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set +# CONFIG_NETFILTER_XT_TARGET_TRACE is not set +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set +# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set +# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set +# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set +# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set +# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set +# CONFIG_NETFILTER_XT_MATCH_DCCP is not set +# CONFIG_NETFILTER_XT_MATCH_DSCP is not set +# CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_HELPER is not set +# CONFIG_NETFILTER_XT_MATCH_HL is not set +# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set +# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +# CONFIG_NETFILTER_XT_MATCH_MARK is not set +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +# CONFIG_NETFILTER_XT_MATCH_OWNER is not set +# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set +# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set +# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set +# CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_RECENT is not set +# CONFIG_NETFILTER_XT_MATCH_SCTP is not set +CONFIG_NETFILTER_XT_MATCH_STATE=m +# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set +# CONFIG_NETFILTER_XT_MATCH_STRING is not set +# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_TIME is not set +# CONFIG_NETFILTER_XT_MATCH_U32 is not set +# CONFIG_IP_VS is not set + +# +# IP: Netfilter Configuration +# +CONFIG_NF_DEFRAG_IPV4=m +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y +# CONFIG_IP_NF_QUEUE is not set +CONFIG_IP_NF_IPTABLES=m +# CONFIG_IP_NF_MATCH_ADDRTYPE is not set +# CONFIG_IP_NF_MATCH_AH is not set +# CONFIG_IP_NF_MATCH_ECN is not set +# CONFIG_IP_NF_MATCH_TTL is not set +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +# CONFIG_IP_NF_TARGET_ULOG is not set +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +# CONFIG_IP_NF_TARGET_NETMAP is not set +# CONFIG_IP_NF_TARGET_REDIRECT is not set +# CONFIG_NF_NAT_SNMP_BASIC is not set +CONFIG_NF_NAT_FTP=m +CONFIG_NF_NAT_IRC=m +CONFIG_NF_NAT_TFTP=m +# CONFIG_NF_NAT_AMANDA is not set +# CONFIG_NF_NAT_PPTP is not set +# CONFIG_NF_NAT_H323 is not set +# CONFIG_NF_NAT_SIP is not set +CONFIG_IP_NF_MANGLE=m +# CONFIG_IP_NF_TARGET_CLUSTERIP is not set +# CONFIG_IP_NF_TARGET_ECN is not set +# CONFIG_IP_NF_TARGET_TTL is not set +CONFIG_IP_NF_RAW=m +# CONFIG_IP_NF_ARPTABLES is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +CONFIG_ATM=m +# CONFIG_ATM_CLIP is not set +# CONFIG_ATM_LANE is not set +CONFIG_ATM_BR2684=m +CONFIG_ATM_BR2684_IPFILTER=y +CONFIG_STP=y +CONFIG_BRIDGE=y +# CONFIG_NET_DSA is not set +CONFIG_VLAN_8021Q=y +# CONFIG_VLAN_8021Q_GVRP is not set +# CONFIG_DECNET is not set +CONFIG_LLC=y +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +CONFIG_NET_SCHED=y + +# +# Queueing/Scheduling +# +# CONFIG_NET_SCH_CBQ is not set +# CONFIG_NET_SCH_HTB is not set +# CONFIG_NET_SCH_HFSC is not set +# CONFIG_NET_SCH_ATM is not set +# CONFIG_NET_SCH_PRIO is not set +# CONFIG_NET_SCH_MULTIQ is not set +# CONFIG_NET_SCH_RED is not set +# CONFIG_NET_SCH_SFQ is not set +# CONFIG_NET_SCH_TEQL is not set +# CONFIG_NET_SCH_TBF is not set +# CONFIG_NET_SCH_GRED is not set +# CONFIG_NET_SCH_DSMARK is not set +# CONFIG_NET_SCH_NETEM is not set +# CONFIG_NET_SCH_DRR is not set +# CONFIG_NET_SCH_INGRESS is not set + +# +# Classification +# +# CONFIG_NET_CLS_BASIC is not set +# CONFIG_NET_CLS_TCINDEX is not set +# CONFIG_NET_CLS_ROUTE4 is not set +# CONFIG_NET_CLS_FW is not set +# CONFIG_NET_CLS_U32 is not set +# CONFIG_NET_CLS_RSVP is not set +# CONFIG_NET_CLS_RSVP6 is not set +# CONFIG_NET_CLS_FLOW is not set +# CONFIG_NET_EMATCH is not set +CONFIG_NET_CLS_ACT=y +CONFIG_NET_ACT_POLICE=y +# CONFIG_NET_ACT_GACT is not set +# CONFIG_NET_ACT_MIRRED is not set +# CONFIG_NET_ACT_IPT is not set +# CONFIG_NET_ACT_NAT is not set +# CONFIG_NET_ACT_PEDIT is not set +# CONFIG_NET_ACT_SIMP is not set +# CONFIG_NET_ACT_SKBEDIT is not set +CONFIG_NET_SCH_FIFO=y +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +CONFIG_HAMRADIO=y + +# +# Packet Radio protocols +# +# CONFIG_AX25 is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +CONFIG_FIB_RULES=y +CONFIG_WIRELESS=y +CONFIG_CFG80211=m +# CONFIG_CFG80211_REG_DEBUG is not set +# CONFIG_CFG80211_DEBUGFS is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set +CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +# CONFIG_LIB80211 is not set +CONFIG_MAC80211=m +CONFIG_MAC80211_DEFAULT_PS=y +CONFIG_MAC80211_DEFAULT_PS_VALUE=1 + +# +# Rate control algorithm selection +# +CONFIG_MAC80211_RC_PID=y +CONFIG_MAC80211_RC_MINSTREL=y +CONFIG_MAC80211_RC_DEFAULT_PID=y +# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set +CONFIG_MAC80211_RC_DEFAULT="pid" +# CONFIG_MAC80211_MESH is not set +# CONFIG_MAC80211_LEDS is not set +# CONFIG_MAC80211_DEBUGFS is not set +# CONFIG_MAC80211_DEBUG_MENU is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_STAA=y +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_IFB is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +CONFIG_FIXED_PHY=y +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_KS8842 is not set +CONFIG_CPMAC=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +CONFIG_WLAN_80211=y +# CONFIG_LIBERTAS is not set +# CONFIG_LIBERTAS_THINFIRM is not set +# CONFIG_MAC80211_HWSIM is not set +# CONFIG_P54_COMMON is not set +# CONFIG_HOSTAP is not set +# CONFIG_B43 is not set +# CONFIG_B43LEGACY is not set +# CONFIG_RT2X00 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +# CONFIG_WAN is not set +CONFIG_ATM_DRIVERS=y +# CONFIG_ATM_DUMMY is not set +# CONFIG_ATM_TCP is not set +CONFIG_PPP=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=m +# CONFIG_PPP_SYNC_TTY is not set +# CONFIG_PPP_DEFLATE is not set +# CONFIG_PPP_BSDCOMP is not set +# CONFIG_PPP_MPPE is not set +CONFIG_PPPOE=m +CONFIG_PPPOATM=m +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=m +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_DEVKMEM is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=2 +CONFIG_SERIAL_8250_RUNTIME_UARTS=2 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_AR7_WDT=y +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +CONFIG_SSB=y +# CONFIG_SSB_SILENT is not set +# CONFIG_SSB_DEBUG is not set +CONFIG_SSB_SERIAL=y +CONFIG_SSB_DRIVER_MIPS=y +CONFIG_SSB_EMBEDDED=y +CONFIG_SSB_DRIVER_EXTIF=y + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_SOUND is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_GPIO is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y + +# +# iptables trigger is under Netfilter config (LED target) +# +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +CONFIG_VLYNQ=y +# CONFIG_STAGING is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY is not set +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +# CONFIG_PROC_PAGE_MONITOR is not set +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_SUMMARY=y +# CONFIG_JFFS2_FS_XATTR is not set +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set +# CONFIG_CRAMFS is not set +CONFIG_SQUASHFS=y +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_BSD_DISKLABEL=y +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +# CONFIG_NLS is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_CMDLINE="rootfstype=squashfs,jffs2" + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_ALGAPI2=m +CONFIG_CRYPTO_AEAD2=m +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_BLKCIPHER2=m +CONFIG_CRYPTO_HASH2=m +CONFIG_CRYPTO_RNG2=m +CONFIG_CRYPTO_PCOMP=m +CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_MANAGER2=m +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=m +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_AES=m +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=m +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/mips/include/asm/mach-ar7/ar7.h b/arch/mips/include/asm/mach-ar7/ar7.h new file mode 100644 index 0000000..de71694 --- /dev/null +++ b/arch/mips/include/asm/mach-ar7/ar7.h @@ -0,0 +1,178 @@ +/* + * Copyright (C) 2006,2007 Felix Fietkau <nbd@openwrt.org> + * Copyright (C) 2006,2007 Eugene Konev <ejka@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef __AR7_H__ +#define __AR7_H__ + +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/errno.h> + +#include <asm/addrspace.h> + +#define AR7_SDRAM_BASE 0x14000000 + +#define AR7_REGS_BASE 0x08610000 + +#define AR7_REGS_MAC0 (AR7_REGS_BASE + 0x0000) +#define AR7_REGS_GPIO (AR7_REGS_BASE + 0x0900) +/* 0x08610A00 - 0x08610BFF (512 bytes, 128 bytes / clock) */ +#define AR7_REGS_POWER (AR7_REGS_BASE + 0x0a00) +#define AR7_REGS_CLOCKS (AR7_REGS_POWER + 0x80) +#define UR8_REGS_CLOCKS (AR7_REGS_POWER + 0x20) +#define AR7_REGS_UART0 (AR7_REGS_BASE + 0x0e00) +#define AR7_REGS_USB (AR7_REGS_BASE + 0x1200) +#define AR7_REGS_RESET (AR7_REGS_BASE + 0x1600) +#define AR7_REGS_VLYNQ0 (AR7_REGS_BASE + 0x1800) +#define AR7_REGS_DCL (AR7_REGS_BASE + 0x1a00) +#define AR7_REGS_VLYNQ1 (AR7_REGS_BASE + 0x1c00) +#define AR7_REGS_MDIO (AR7_REGS_BASE + 0x1e00) +#define AR7_REGS_IRQ (AR7_REGS_BASE + 0x2400) +#define AR7_REGS_MAC1 (AR7_REGS_BASE + 0x2800) + +#define AR7_REGS_WDT (AR7_REGS_BASE + 0x1f00) +#define UR8_REGS_WDT (AR7_REGS_BASE + 0x0b00) +#define UR8_REGS_UART1 (AR7_REGS_BASE + 0x0f00) + +#define AR7_RESET_PEREPHERIAL 0x0 +#define AR7_RESET_SOFTWARE 0x4 +#define AR7_RESET_STATUS 0x8 + +#define AR7_RESET_BIT_CPMAC_LO 17 +#define AR7_RESET_BIT_CPMAC_HI 21 +#define AR7_RESET_BIT_MDIO 22 +#define AR7_RESET_BIT_EPHY 26 + +/* GPIO control registers */ +#define AR7_GPIO_INPUT 0x0 +#define AR7_GPIO_OUTPUT 0x4 +#define AR7_GPIO_DIR 0x8 +#define AR7_GPIO_ENABLE 0xc + +#define AR7_CHIP_7100 0x18 +#define AR7_CHIP_7200 0x2b +#define AR7_CHIP_7300 0x05 + +/* Interrupts */ +#define AR7_IRQ_UART0 15 +#define AR7_IRQ_UART1 16 + +/* Clocks */ +#define AR7_AFE_CLOCK 35328000 +#define AR7_REF_CLOCK 25000000 +#define AR7_XTAL_CLOCK 24000000 + +struct plat_cpmac_data { + int reset_bit; + int power_bit; + u32 phy_mask; + char dev_addr[6]; +}; + +struct plat_dsl_data { + int reset_bit_dsl; + int reset_bit_sar; +}; + +extern int ar7_cpu_clock, ar7_bus_clock, ar7_dsp_clock; + +static inline u16 ar7_chip_id(void) +{ + return readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x14)) & 0xffff; +} + +static inline u8 ar7_chip_rev(void) +{ + return (readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x14)) >> 16) & 0xff; +} + +static inline int ar7_cpu_freq(void) +{ + return ar7_cpu_clock; +} + +static inline int ar7_bus_freq(void) +{ + return ar7_bus_clock; +} + +static inline int ar7_vbus_freq(void) +{ + return ar7_bus_clock / 2; +} +#define ar7_cpmac_freq ar7_vbus_freq + +static inline int ar7_dsp_freq(void) +{ + return ar7_dsp_clock; +} + +static inline int ar7_has_high_cpmac(void) +{ + u16 chip_id = ar7_chip_id(); + switch (chip_id) { + case AR7_CHIP_7100: + case AR7_CHIP_7200: + return 0; + case AR7_CHIP_7300: + return 1; + default: + return -ENXIO; + } +} +#define ar7_has_high_vlynq ar7_has_high_cpmac +#define ar7_has_second_uart ar7_has_high_cpmac + +static inline void ar7_device_enable(u32 bit) +{ + void *reset_reg = + (void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PEREPHERIAL); + writel(readl(reset_reg) | (1 << bit), reset_reg); + msleep(20); +} + +static inline void ar7_device_disable(u32 bit) +{ + void *reset_reg = + (void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PEREPHERIAL); + writel(readl(reset_reg) & ~(1 << bit), reset_reg); + msleep(20); +} + +static inline void ar7_device_reset(u32 bit) +{ + ar7_device_disable(bit); + ar7_device_enable(bit); +} + +static inline void ar7_device_on(u32 bit) +{ + void *power_reg = (void *)KSEG1ADDR(AR7_REGS_POWER); + writel(readl(power_reg) | (1 << bit), power_reg); + msleep(20); +} + +static inline void ar7_device_off(u32 bit) +{ + void *power_reg = (void *)KSEG1ADDR(AR7_REGS_POWER); + writel(readl(power_reg) & ~(1 << bit), power_reg); + msleep(20); +} + +#endif /* __AR7_H__ */ diff --git a/arch/mips/include/asm/mach-ar7/gpio.h b/arch/mips/include/asm/mach-ar7/gpio.h new file mode 100644 index 0000000..cbe9c4f --- /dev/null +++ b/arch/mips/include/asm/mach-ar7/gpio.h @@ -0,0 +1,110 @@ +/* + * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef __AR7_GPIO_H__ +#define __AR7_GPIO_H__ + +#include <asm/mach-ar7/ar7.h> + +#define AR7_GPIO_MAX 32 + +extern int gpio_request(unsigned gpio, const char *label); +extern void gpio_free(unsigned gpio); + +/* Common GPIO layer */ +static inline int gpio_get_value(unsigned gpio) +{ + void __iomem *gpio_in = + (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_INPUT); + + return readl(gpio_in) & (1 << gpio); +} + +static inline void gpio_set_value(unsigned gpio, int value) +{ + void __iomem *gpio_out = + (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_OUTPUT); + unsigned tmp; + + tmp = readl(gpio_out) & ~(1 << gpio); + if (value) + tmp |= 1 << gpio; + writel(tmp, gpio_out); +} + +static inline int gpio_direction_input(unsigned gpio) +{ + void __iomem *gpio_dir = + (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_DIR); + + if (gpio >= AR7_GPIO_MAX) + return -EINVAL; + + writel(readl(gpio_dir) | (1 << gpio), gpio_dir); + + return 0; +} + +static inline int gpio_direction_output(unsigned gpio, int value) +{ + void __iomem *gpio_dir = + (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_DIR); + + if (gpio >= AR7_GPIO_MAX) + return -EINVAL; + + gpio_set_value(gpio, value); + writel(readl(gpio_dir) & ~(1 << gpio), gpio_dir); + + return 0; +} + +static inline int gpio_to_irq(unsigned gpio) +{ + return -EINVAL; +} + +static inline int irq_to_gpio(unsigned irq) +{ + return -EINVAL; +} + +/* Board specific GPIO functions */ +static inline int ar7_gpio_enable(unsigned gpio) +{ + void __iomem *gpio_en = + (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_ENABLE); + + writel(readl(gpio_en) | (1 << gpio), gpio_en); + + return 0; +} + +static inline int ar7_gpio_disable(unsigned gpio) +{ + void __iomem *gpio_en = + (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_ENABLE); + + writel(readl(gpio_en) & ~(1 << gpio), gpio_en); + + return 0; +} + +#include <asm-generic/gpio.h> + +#endif diff --git a/arch/mips/include/asm/mach-ar7/irq.h b/arch/mips/include/asm/mach-ar7/irq.h new file mode 100644 index 0000000..39e9757 --- /dev/null +++ b/arch/mips/include/asm/mach-ar7/irq.h @@ -0,0 +1,16 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Shamelessly copied from asm-mips/mach-emma2rh/ + * Copyright (C) 2003 by Ralf Baechle + */ +#ifndef __ASM_AR7_IRQ_H +#define __ASM_AR7_IRQ_H + +#define NR_IRQS 256 + +#include_next <irq.h> + +#endif /* __ASM_AR7_IRQ_H */ diff --git a/arch/mips/include/asm/mach-ar7/prom.h b/arch/mips/include/asm/mach-ar7/prom.h new file mode 100644 index 0000000..088f61fe --- /dev/null +++ b/arch/mips/include/asm/mach-ar7/prom.h @@ -0,0 +1,25 @@ +/* + * Copyright (C) 2006, 2007 Florian Fainelli <florian@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef __PROM_H__ +#define __PROM_H__ + +extern char *prom_getenv(const char *name); +extern void prom_meminit(void); + +#endif /* __PROM_H__ */ diff --git a/arch/mips/include/asm/mach-ar7/spaces.h b/arch/mips/include/asm/mach-ar7/spaces.h new file mode 100644 index 0000000..ac28f27 --- /dev/null +++ b/arch/mips/include/asm/mach-ar7/spaces.h @@ -0,0 +1,22 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994 - 1999, 2000, 03, 04 Ralf Baechle + * Copyright (C) 2000, 2002 Maciej W. Rozycki + * Copyright (C) 1990, 1999, 2000 Silicon Graphics, Inc. + */ +#ifndef _ASM_AR7_SPACES_H +#define _ASM_AR7_SPACES_H + +/* + * This handles the memory map. + * We handle pages at KSEG0 for kernels with 32 bit address space. + */ +#define PAGE_OFFSET 0x94000000UL +#define PHYS_OFFSET 0x14000000UL + +#include <asm/mach-generic/spaces.h> + +#endif /* __ASM_AR7_SPACES_H */ diff --git a/arch/mips/include/asm/mach-ar7/war.h b/arch/mips/include/asm/mach-ar7/war.h new file mode 100644 index 0000000..f4862b5 --- /dev/null +++ b/arch/mips/include/asm/mach-ar7/war.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> + */ +#ifndef __ASM_MIPS_MACH_AR7_WAR_H +#define __ASM_MIPS_MACH_AR7_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_AR7_WAR_H */ -- cgit v1.1 From 52a7a27cd8f6c57817da99fef019e37b9c303c4e Mon Sep 17 00:00:00 2001 From: Joe Perches <joe@perches.com> Date: Sun, 28 Jun 2009 09:26:09 -0700 Subject: MIPS: MT: Remove unnecessary semicolons Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/kernel/vpe.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c index 3ca5f42..07b9ec2 100644 --- a/arch/mips/kernel/vpe.c +++ b/arch/mips/kernel/vpe.c @@ -1387,7 +1387,7 @@ static ssize_t store_ntcs(struct device *dev, struct device_attribute *attr, return len; out_einval: - return -EINVAL;; + return -EINVAL; } static struct device_attribute vpe_class_attributes[] = { -- cgit v1.1 From d7e014db374d987c6bcff0b9abab2c6796f8e793 Mon Sep 17 00:00:00 2001 From: Dmitri Vorobiev <dmitri.vorobiev@movial.com> Date: Fri, 26 Jun 2009 19:59:25 +0300 Subject: MIPS: Malta: Remove unnecessary function prototypes Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/mti-malta/malta-reset.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'arch') diff --git a/arch/mips/mti-malta/malta-reset.c b/arch/mips/mti-malta/malta-reset.c index 42dee4d..f48d60e 100644 --- a/arch/mips/mti-malta/malta-reset.c +++ b/arch/mips/mti-malta/malta-reset.c @@ -28,9 +28,6 @@ #include <asm/reboot.h> #include <asm/mips-boards/generic.h> -static void mips_machine_restart(char *command); -static void mips_machine_halt(void); - static void mips_machine_restart(char *command) { unsigned int __iomem *softres_reg = -- cgit v1.1 From 69f16c9a8630edc64cb1d6f1bfca4ee7bc16279f Mon Sep 17 00:00:00 2001 From: David Daney <ddaney@caviumnetworks.com> Date: Fri, 26 Jun 2009 09:53:57 -0700 Subject: MIPS: Hookup new syscalls sys_rt_tgsigqueueinfo and sys_perf_counter_open. [Ralf: I fixed up the numbering in the comment in scall64-n32.S.] Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/include/asm/unistd.h | 18 ++++++++++++------ arch/mips/kernel/scall32-o32.S | 2 ++ arch/mips/kernel/scall64-64.S | 2 ++ arch/mips/kernel/scall64-n32.S | 2 ++ arch/mips/kernel/scall64-o32.S | 2 ++ 5 files changed, 20 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/mips/include/asm/unistd.h b/arch/mips/include/asm/unistd.h index 4000501..b70c49f 100644 --- a/arch/mips/include/asm/unistd.h +++ b/arch/mips/include/asm/unistd.h @@ -352,16 +352,18 @@ #define __NR_inotify_init1 (__NR_Linux + 329) #define __NR_preadv (__NR_Linux + 330) #define __NR_pwritev (__NR_Linux + 331) +#define __NR_rt_tgsigqueueinfo (__NR_Linux + 332) +#define __NR_perf_counter_open (__NR_Linux + 333) /* * Offset of the last Linux o32 flavoured syscall */ -#define __NR_Linux_syscalls 331 +#define __NR_Linux_syscalls 333 #endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */ #define __NR_O32_Linux 4000 -#define __NR_O32_Linux_syscalls 331 +#define __NR_O32_Linux_syscalls 333 #if _MIPS_SIM == _MIPS_SIM_ABI64 @@ -660,16 +662,18 @@ #define __NR_inotify_init1 (__NR_Linux + 288) #define __NR_preadv (__NR_Linux + 289) #define __NR_pwritev (__NR_Linux + 290) +#define __NR_rt_tgsigqueueinfo (__NR_Linux + 291) +#define __NR_perf_counter_open (__NR_Linux + 292) /* * Offset of the last Linux 64-bit flavoured syscall */ -#define __NR_Linux_syscalls 290 +#define __NR_Linux_syscalls 292 #endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */ #define __NR_64_Linux 5000 -#define __NR_64_Linux_syscalls 290 +#define __NR_64_Linux_syscalls 292 #if _MIPS_SIM == _MIPS_SIM_NABI32 @@ -972,16 +976,18 @@ #define __NR_inotify_init1 (__NR_Linux + 292) #define __NR_preadv (__NR_Linux + 293) #define __NR_pwritev (__NR_Linux + 294) +#define __NR_rt_tgsigqueueinfo (__NR_Linux + 295) +#define __NR_perf_counter_open (__NR_Linux + 296) /* * Offset of the last N32 flavoured syscall */ -#define __NR_Linux_syscalls 294 +#define __NR_Linux_syscalls 296 #endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */ #define __NR_N32_Linux 6000 -#define __NR_N32_Linux_syscalls 294 +#define __NR_N32_Linux_syscalls 296 #ifdef __KERNEL__ diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S index 0b31b9b..20a86e0 100644 --- a/arch/mips/kernel/scall32-o32.S +++ b/arch/mips/kernel/scall32-o32.S @@ -652,6 +652,8 @@ einval: li v0, -ENOSYS sys sys_inotify_init1 1 sys sys_preadv 6 /* 4330 */ sys sys_pwritev 6 + sys sys_rt_tgsigqueueinfo 4 + sys sys_perf_counter_open 5 .endm /* We pre-compute the number of _instruction_ bytes needed to diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S index c647fd6..b046130 100644 --- a/arch/mips/kernel/scall64-64.S +++ b/arch/mips/kernel/scall64-64.S @@ -489,4 +489,6 @@ sys_call_table: PTR sys_inotify_init1 PTR sys_preadv PTR sys_pwritev /* 5390 */ + PTR sys_rt_tgsigqueueinfo + PTR sys_perf_counter_open .size sys_call_table,.-sys_call_table diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S index 93cc672..15874f9 100644 --- a/arch/mips/kernel/scall64-n32.S +++ b/arch/mips/kernel/scall64-n32.S @@ -415,4 +415,6 @@ EXPORT(sysn32_call_table) PTR sys_inotify_init1 PTR sys_preadv PTR sys_pwritev + PTR compat_sys_rt_tgsigqueueinfo /* 5295 */ + PTR sys_perf_counter_open .size sysn32_call_table,.-sysn32_call_table diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index a5598b2..781e0f1 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -535,4 +535,6 @@ sys_call_table: PTR sys_inotify_init1 PTR compat_sys_preadv /* 4330 */ PTR compat_sys_pwritev + PTR compat_sys_rt_tgsigqueueinfo + PTR sys_perf_counter_open .size sys_call_table,.-sys_call_table -- cgit v1.1 From 27fdd325dace4a1ebfa10e93ba6f3d25f25df674 Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa <yyuasa@linux.com> Date: Mon, 29 Jun 2009 11:11:05 +0900 Subject: MIPS: Update VR41xx GPIO driver to use gpiolib Signed-off-by: Yoichi Yuasa <yyuasa@linux.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/Kconfig | 1 + arch/mips/include/asm/vr41xx/giu.h | 22 +++------------------- 2 files changed, 4 insertions(+), 19 deletions(-) (limited to 'arch') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index b0e5511..64891f7 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -267,6 +267,7 @@ config MACH_VR41XX select CEVT_R4K select CSRC_R4K select SYS_HAS_CPU_VR41XX + select ARCH_REQUIRE_GPIOLIB config NXP_STB220 bool "NXP STB220 board" diff --git a/arch/mips/include/asm/vr41xx/giu.h b/arch/mips/include/asm/vr41xx/giu.h index 0bcdd3a..b369c09 100644 --- a/arch/mips/include/asm/vr41xx/giu.h +++ b/arch/mips/include/asm/vr41xx/giu.h @@ -1,7 +1,7 @@ /* * Include file for NEC VR4100 series General-purpose I/O Unit. * - * Copyright (C) 2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2005-2009 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -41,7 +41,8 @@ typedef enum { IRQ_SIGNAL_HOLD, } irq_signal_t; -extern void vr41xx_set_irq_trigger(unsigned int pin, irq_trigger_t trigger, irq_signal_t signal); +extern void vr41xx_set_irq_trigger(unsigned int pin, irq_trigger_t trigger, + irq_signal_t signal); typedef enum { IRQ_LEVEL_LOW, @@ -51,23 +52,6 @@ typedef enum { extern void vr41xx_set_irq_level(unsigned int pin, irq_level_t level); typedef enum { - GPIO_DATA_LOW, - GPIO_DATA_HIGH, - GPIO_DATA_INVAL, -} gpio_data_t; - -extern gpio_data_t vr41xx_gpio_get_pin(unsigned int pin); -extern int vr41xx_gpio_set_pin(unsigned int pin, gpio_data_t data); - -typedef enum { - GPIO_INPUT, - GPIO_OUTPUT, - GPIO_OUTPUT_DISABLE, -} gpio_direction_t; - -extern int vr41xx_gpio_set_direction(unsigned int pin, gpio_direction_t dir); - -typedef enum { GPIO_PULL_DOWN, GPIO_PULL_UP, GPIO_PULL_DISABLE, -- cgit v1.1 From b53d4d1f8d522342e66f79b8b49a19835071fed4 Mon Sep 17 00:00:00 2001 From: David Daney <ddaney@caviumnetworks.com> Date: Mon, 29 Jun 2009 09:54:15 -0700 Subject: MIPS: Define __arch_swab64 for all mips r2 cpus Some CPUs implement mipsr2, but because they are a super-set of mips64r2 do not define CONFIG_CPU_MIPS64_R2. Cavium OCTEON falls into this category. We would still like to use the optimized implementation, so since we have already checked for CONFIG_CPU_MIPSR2, checking for CONFIG_64BIT instead of CONFIG_CPU_MIPS64_R2 is sufficient. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/include/asm/swab.h | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/mips/include/asm/swab.h b/arch/mips/include/asm/swab.h index 99993c0..97c2f81 100644 --- a/arch/mips/include/asm/swab.h +++ b/arch/mips/include/asm/swab.h @@ -38,7 +38,11 @@ static inline __attribute_const__ __u32 __arch_swab32(__u32 x) } #define __arch_swab32 __arch_swab32 -#ifdef CONFIG_CPU_MIPS64_R2 +/* + * Having already checked for CONFIG_CPU_MIPSR2, enable the + * optimized version for 64-bit kernel on r2 CPUs. + */ +#ifdef CONFIG_64BIT static inline __attribute_const__ __u64 __arch_swab64(__u64 x) { __asm__( @@ -50,6 +54,6 @@ static inline __attribute_const__ __u64 __arch_swab64(__u64 x) return x; } #define __arch_swab64 __arch_swab64 -#endif /* CONFIG_CPU_MIPS64_R2 */ +#endif /* CONFIG_64BIT */ #endif /* CONFIG_CPU_MIPSR2 */ #endif /* _ASM_SWAB_H */ -- cgit v1.1 From 9306c8def6abc2dbde4ac75eb6c631606b8fc1dd Mon Sep 17 00:00:00 2001 From: Tim Anderson <tanderson@mvista.com> Date: Wed, 17 Jun 2009 16:21:19 -0700 Subject: MIPS: CMP: Extend the GIC IPI interrupts beyond 32 This patch extends the GIC interrupt handling beyond the current 32 bit range as well as extending the number of interrupts based on the number of CPUs. Signed-off-by: Tim Anderson <tanderson@mvista.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/include/asm/gic.h | 4 ++++ arch/mips/kernel/irq-gic.c | 15 ++++----------- 2 files changed, 8 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/mips/include/asm/gic.h b/arch/mips/include/asm/gic.h index 954807d..e8fdd92 100644 --- a/arch/mips/include/asm/gic.h +++ b/arch/mips/include/asm/gic.h @@ -20,7 +20,11 @@ #define GIC_TRIG_EDGE 1 #define GIC_TRIG_LEVEL 0 +#if CONFIG_SMP +#define GIC_NUM_INTRS (24 + NR_CPUS * 2) +#else #define GIC_NUM_INTRS 32 +#endif #define MSK(n) ((1 << (n)) - 1) #define REG32(addr) (*(volatile unsigned int *) (addr)) diff --git a/arch/mips/kernel/irq-gic.c b/arch/mips/kernel/irq-gic.c index 39000f1..5c85e1c 100644 --- a/arch/mips/kernel/irq-gic.c +++ b/arch/mips/kernel/irq-gic.c @@ -107,9 +107,7 @@ static unsigned int gic_irq_startup(unsigned int irq) { pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq); irq -= _irqbase; - /* FIXME: this is wrong for !GICISWORDLITTLEENDIAN */ - GICWRITE(GIC_REG_ADDR(SHARED, (GIC_SH_SMASK_31_0_OFS + (irq / 32))), - 1 << (irq % 32)); + GIC_SET_INTR_MASK(irq, 1); return 0; } @@ -120,8 +118,7 @@ static void gic_irq_ack(unsigned int irq) #endif pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq); irq -= _irqbase; - GICWRITE(GIC_REG_ADDR(SHARED, (GIC_SH_RMASK_31_0_OFS + (irq / 32))), - 1 << (irq % 32)); + GIC_CLR_INTR_MASK(irq, 1); if (_intrmap[irq].trigtype == GIC_TRIG_EDGE) { if (!gic_wedgeb2bok) @@ -138,18 +135,14 @@ static void gic_mask_irq(unsigned int irq) { pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq); irq -= _irqbase; - /* FIXME: this is wrong for !GICISWORDLITTLEENDIAN */ - GICWRITE(GIC_REG_ADDR(SHARED, (GIC_SH_RMASK_31_0_OFS + (irq / 32))), - 1 << (irq % 32)); + GIC_CLR_INTR_MASK(irq, 1); } static void gic_unmask_irq(unsigned int irq) { pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq); irq -= _irqbase; - /* FIXME: this is wrong for !GICISWORDLITTLEENDIAN */ - GICWRITE(GIC_REG_ADDR(SHARED, (GIC_SH_SMASK_31_0_OFS + (irq / 32))), - 1 << (irq % 32)); + GIC_SET_INTR_MASK(irq, 1); } #ifdef CONFIG_SMP -- cgit v1.1 From a214cef9a5d06894785dca1f967c9c324cc84c17 Mon Sep 17 00:00:00 2001 From: Tim Anderson <tanderson@mvista.com> Date: Wed, 17 Jun 2009 16:22:25 -0700 Subject: MIPS: CMP: Extend IPI handling to CPU number This takes the current IPI interrupt assignment from the fix number of 4 to the number of CPUs defined in the system. Signed-off-by: Tim Anderson <tanderson@mvista.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/kernel/irq-gic.c | 4 +++ arch/mips/mti-malta/malta-int.c | 74 ++++++++++++++++++++--------------------- 2 files changed, 40 insertions(+), 38 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/irq-gic.c b/arch/mips/kernel/irq-gic.c index 5c85e1c..d2072cd 100644 --- a/arch/mips/kernel/irq-gic.c +++ b/arch/mips/kernel/irq-gic.c @@ -247,6 +247,10 @@ static void __init gic_basic_init(void) if (cpu == X) continue; + if (cpu == 0 && i != 0 && _intrmap[i].intrnum == 0 && + _intrmap[i].ipiflag == 0) + continue; + setup_intr(_intrmap[i].intrnum, _intrmap[i].cpunum, _intrmap[i].pin, diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c index b4eaf13..4e14972 100644 --- a/arch/mips/mti-malta/malta-int.c +++ b/arch/mips/mti-malta/malta-int.c @@ -331,6 +331,11 @@ static struct irqaction irq_call = { .flags = IRQF_DISABLED|IRQF_PERCPU, .name = "IPI_call" }; + +static int gic_resched_int_base; +static int gic_call_int_base; +#define GIC_RESCHED_INT(cpu) (gic_resched_int_base+(cpu)) +#define GIC_CALL_INT(cpu) (gic_call_int_base+(cpu)) #endif /* CONFIG_MIPS_MT_SMP */ static struct irqaction i8259irq = { @@ -370,7 +375,7 @@ static int __initdata msc_nr_eicirqs = ARRAY_SIZE(msc_eicirqmap); * Interrupts and CPUs/Core Interrupts. The nature of the External * Interrupts is also defined here - polarity/trigger. */ -static struct gic_intr_map gic_intr_map[] = { +static struct gic_intr_map gic_intr_map[GIC_NUM_INTRS] = { { GIC_EXT_INTR(0), X, X, X, X, 0 }, { GIC_EXT_INTR(1), X, X, X, X, 0 }, { GIC_EXT_INTR(2), X, X, X, X, 0 }, @@ -387,14 +392,7 @@ static struct gic_intr_map gic_intr_map[] = { { GIC_EXT_INTR(13), 0, GIC_MAP_TO_NMI_MSK, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, { GIC_EXT_INTR(14), 0, GIC_MAP_TO_NMI_MSK, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, { GIC_EXT_INTR(15), X, X, X, X, 0 }, - { GIC_EXT_INTR(16), 0, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, - { GIC_EXT_INTR(17), 0, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, - { GIC_EXT_INTR(18), 1, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, - { GIC_EXT_INTR(19), 1, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, - { GIC_EXT_INTR(20), 2, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, - { GIC_EXT_INTR(21), 2, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, - { GIC_EXT_INTR(22), 3, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, - { GIC_EXT_INTR(23), 3, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, +/* This is the end of the general interrupts now we do IPI ones */ }; #endif @@ -416,14 +414,25 @@ static int __init gcmp_probe(unsigned long addr, unsigned long size) } #if defined(CONFIG_MIPS_MT_SMP) +static void __init fill_ipi_map1(int baseintr, int cpu, int cpupin) +{ + int intr = baseintr + cpu; + gic_intr_map[intr].intrnum = GIC_EXT_INTR(intr); + gic_intr_map[intr].cpunum = cpu; + gic_intr_map[intr].pin = cpupin; + gic_intr_map[intr].polarity = GIC_POL_POS; + gic_intr_map[intr].trigtype = GIC_TRIG_EDGE; + gic_intr_map[intr].ipiflag = 1; + ipi_map[cpu] |= (1 << (cpupin + 2)); +} + static void __init fill_ipi_map(void) { - int i; + int cpu; - for (i = 0; i < ARRAY_SIZE(gic_intr_map); i++) { - if (gic_intr_map[i].ipiflag && (gic_intr_map[i].cpunum != X)) - ipi_map[gic_intr_map[i].cpunum] |= - (1 << (gic_intr_map[i].pin + 2)); + for (cpu = 0; cpu < NR_CPUS; cpu++) { + fill_ipi_map1(gic_resched_int_base, cpu, GIC_CPU_INT1); + fill_ipi_map1(gic_call_int_base, cpu, GIC_CPU_INT2); } } #endif @@ -514,24 +523,10 @@ void __init arch_init_irq(void) if (gic_present) { /* FIXME */ int i; - struct { - unsigned int resched; - unsigned int call; - } ipiirq[] = { - { - .resched = GIC_IPI_EXT_INTR_RESCHED_VPE0, - .call = GIC_IPI_EXT_INTR_CALLFNC_VPE0}, - { - .resched = GIC_IPI_EXT_INTR_RESCHED_VPE1, - .call = GIC_IPI_EXT_INTR_CALLFNC_VPE1 - }, { - .resched = GIC_IPI_EXT_INTR_RESCHED_VPE2, - .call = GIC_IPI_EXT_INTR_CALLFNC_VPE2 - }, { - .resched = GIC_IPI_EXT_INTR_RESCHED_VPE3, - .call = GIC_IPI_EXT_INTR_CALLFNC_VPE3 - } - }; + + gic_call_int_base = GIC_NUM_INTRS - NR_CPUS; + gic_resched_int_base = gic_call_int_base - NR_CPUS; + fill_ipi_map(); gic_init(GIC_BASE_ADDR, GIC_ADDRSPACE_SZ, gic_intr_map, ARRAY_SIZE(gic_intr_map), MIPS_GIC_IRQ_BASE); if (!gcmp_present) { @@ -553,12 +548,15 @@ void __init arch_init_irq(void) printk("CPU%d: status register now %08x\n", smp_processor_id(), read_c0_status()); write_c0_status(0x1100dc00); printk("CPU%d: status register frc %08x\n", smp_processor_id(), read_c0_status()); - for (i = 0; i < ARRAY_SIZE(ipiirq); i++) { - setup_irq(MIPS_GIC_IRQ_BASE + ipiirq[i].resched, &irq_resched); - setup_irq(MIPS_GIC_IRQ_BASE + ipiirq[i].call, &irq_call); - - set_irq_handler(MIPS_GIC_IRQ_BASE + ipiirq[i].resched, handle_percpu_irq); - set_irq_handler(MIPS_GIC_IRQ_BASE + ipiirq[i].call, handle_percpu_irq); + for (i = 0; i < NR_CPUS; i++) { + setup_irq(MIPS_GIC_IRQ_BASE + + GIC_RESCHED_INT(i), &irq_resched); + setup_irq(MIPS_GIC_IRQ_BASE + + GIC_CALL_INT(i), &irq_call); + set_irq_handler(MIPS_GIC_IRQ_BASE + + GIC_RESCHED_INT(i), handle_percpu_irq); + set_irq_handler(MIPS_GIC_IRQ_BASE + + GIC_CALL_INT(i), handle_percpu_irq); } } else { /* set up ipi interrupts */ -- cgit v1.1 From 0365070f05f12f1648b4adf22cfb52ec7a8a371c Mon Sep 17 00:00:00 2001 From: Tim Anderson <tanderson@mvista.com> Date: Wed, 17 Jun 2009 16:22:53 -0700 Subject: MIPS: CMP: activate CMP support Most of the CMP support was added before, this mostly correct compile problems but adds a platform specific translation for the interrupt number based on cpu number. Signed-off-by: Tim Anderson <tanderson@mvista.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/Kconfig | 2 +- arch/mips/include/asm/amon.h | 7 +++++ arch/mips/include/asm/gic.h | 2 ++ arch/mips/kernel/smp-cmp.c | 66 ++++------------------------------------- arch/mips/mti-malta/malta-int.c | 10 +++++++ 5 files changed, 25 insertions(+), 62 deletions(-) create mode 100644 arch/mips/include/asm/amon.h (limited to 'arch') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 64891f7..4368a72 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -229,7 +229,7 @@ config MIPS_MALTA select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_SUPPORTS_MIPS_CMP if BROKEN # because SYNC_R4K is broken + select SYS_SUPPORTS_MIPS_CMP select SYS_SUPPORTS_MULTITHREADING select SYS_SUPPORTS_SMARTMIPS help diff --git a/arch/mips/include/asm/amon.h b/arch/mips/include/asm/amon.h new file mode 100644 index 0000000..c3dc1a6 --- /dev/null +++ b/arch/mips/include/asm/amon.h @@ -0,0 +1,7 @@ +/* + * Amon support + */ + +int amon_cpu_avail(int); +void amon_cpu_start(int, unsigned long, unsigned long, + unsigned long, unsigned long); diff --git a/arch/mips/include/asm/gic.h b/arch/mips/include/asm/gic.h index e8fdd92..10292e3 100644 --- a/arch/mips/include/asm/gic.h +++ b/arch/mips/include/asm/gic.h @@ -487,5 +487,7 @@ extern void gic_init(unsigned long gic_base_addr, extern unsigned int gic_get_int(void); extern void gic_send_ipi(unsigned int intr); +extern unsigned int plat_ipi_call_int_xlate(unsigned int); +extern unsigned int plat_ipi_resched_int_xlate(unsigned int); #endif /* _ASM_GICREGS_H */ diff --git a/arch/mips/kernel/smp-cmp.c b/arch/mips/kernel/smp-cmp.c index 653be06..ad0ff5d 100644 --- a/arch/mips/kernel/smp-cmp.c +++ b/arch/mips/kernel/smp-cmp.c @@ -37,80 +37,24 @@ #include <asm/mipsregs.h> #include <asm/mipsmtregs.h> #include <asm/mips_mt.h> - -/* - * Crude manipulation of the CPU masks to control which - * which CPU's are brought online during initialisation - * - * Beware... this needs to be called after CPU discovery - * but before CPU bringup - */ -static int __init allowcpus(char *str) -{ - cpumask_t cpu_allow_map; - char buf[256]; - int len; - - cpus_clear(cpu_allow_map); - if (cpulist_parse(str, &cpu_allow_map) == 0) { - cpu_set(0, cpu_allow_map); - cpus_and(cpu_possible_map, cpu_possible_map, cpu_allow_map); - len = cpulist_scnprintf(buf, sizeof(buf)-1, &cpu_possible_map); - buf[len] = '\0'; - pr_debug("Allowable CPUs: %s\n", buf); - return 1; - } else - return 0; -} -__setup("allowcpus=", allowcpus); +#include <asm/amon.h> +#include <asm/gic.h> static void ipi_call_function(unsigned int cpu) { - unsigned int action = 0; - pr_debug("CPU%d: %s cpu %d status %08x\n", smp_processor_id(), __func__, cpu, read_c0_status()); - switch (cpu) { - case 0: - action = GIC_IPI_EXT_INTR_CALLFNC_VPE0; - break; - case 1: - action = GIC_IPI_EXT_INTR_CALLFNC_VPE1; - break; - case 2: - action = GIC_IPI_EXT_INTR_CALLFNC_VPE2; - break; - case 3: - action = GIC_IPI_EXT_INTR_CALLFNC_VPE3; - break; - } - gic_send_ipi(action); + gic_send_ipi(plat_ipi_call_int_xlate(cpu)); } static void ipi_resched(unsigned int cpu) { - unsigned int action = 0; - pr_debug("CPU%d: %s cpu %d status %08x\n", smp_processor_id(), __func__, cpu, read_c0_status()); - switch (cpu) { - case 0: - action = GIC_IPI_EXT_INTR_RESCHED_VPE0; - break; - case 1: - action = GIC_IPI_EXT_INTR_RESCHED_VPE1; - break; - case 2: - action = GIC_IPI_EXT_INTR_RESCHED_VPE2; - break; - case 3: - action = GIC_IPI_EXT_INTR_RESCHED_VPE3; - break; - } - gic_send_ipi(action); + gic_send_ipi(plat_ipi_resched_int_xlate(cpu)); } /* @@ -206,7 +150,7 @@ static void cmp_boot_secondary(int cpu, struct task_struct *idle) (unsigned long)(gp + sizeof(struct thread_info))); #endif - amon_cpu_start(cpu, pc, sp, gp, a0); + amon_cpu_start(cpu, pc, sp, (unsigned long)gp, a0); } /* diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c index 4e14972..bc0ba58 100644 --- a/arch/mips/mti-malta/malta-int.c +++ b/arch/mips/mti-malta/malta-int.c @@ -336,6 +336,16 @@ static int gic_resched_int_base; static int gic_call_int_base; #define GIC_RESCHED_INT(cpu) (gic_resched_int_base+(cpu)) #define GIC_CALL_INT(cpu) (gic_call_int_base+(cpu)) + +unsigned int plat_ipi_call_int_xlate(unsigned int cpu) +{ + return GIC_CALL_INT(cpu); +} + +unsigned int plat_ipi_resched_int_xlate(unsigned int cpu) +{ + return GIC_RESCHED_INT(cpu); +} #endif /* CONFIG_MIPS_MT_SMP */ static struct irqaction i8259irq = { -- cgit v1.1 From 47b178bb69ea4d0043f2df509c714bc5b287f375 Mon Sep 17 00:00:00 2001 From: Tim Anderson <tanderson@mvista.com> Date: Wed, 17 Jun 2009 16:25:18 -0700 Subject: MIPS: CMP: Move gcmp_probe to before the SMP ops This is to move the gcmp_probe call to before the use of and selection of the smp_ops functions. This allows malta with 1004K to work. Signed-off-by: Tim Anderson <tanderson@mvista.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/include/asm/gcmpregs.h | 2 ++ arch/mips/mti-malta/malta-init.c | 14 +++++++++++++- arch/mips/mti-malta/malta-int.c | 5 +---- 3 files changed, 16 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/mips/include/asm/gcmpregs.h b/arch/mips/include/asm/gcmpregs.h index d74a8a4..36fd969 100644 --- a/arch/mips/include/asm/gcmpregs.h +++ b/arch/mips/include/asm/gcmpregs.h @@ -114,4 +114,6 @@ #define GCMP_CCB_DINTGROUP_OFS 0x0030 /* DINT Group Participate */ #define GCMP_CCB_DBGGROUP_OFS 0x0100 /* DebugBreak Group */ +extern int __init gcmp_probe(unsigned long, unsigned long); + #endif /* _ASM_GCMPREGS_H */ diff --git a/arch/mips/mti-malta/malta-init.c b/arch/mips/mti-malta/malta-init.c index 475038a..27c807b6 100644 --- a/arch/mips/mti-malta/malta-init.c +++ b/arch/mips/mti-malta/malta-init.c @@ -30,6 +30,7 @@ #include <asm/cacheflush.h> #include <asm/traps.h> +#include <asm/gcmpregs.h> #include <asm/mips-boards/prom.h> #include <asm/mips-boards/generic.h> #include <asm/mips-boards/bonito64.h> @@ -192,6 +193,8 @@ extern struct plat_smp_ops msmtc_smp_ops; void __init prom_init(void) { + int result; + prom_argc = fw_arg0; _prom_argv = (int *) fw_arg1; _prom_envp = (int *) fw_arg2; @@ -358,12 +361,21 @@ void __init prom_init(void) #ifdef CONFIG_SERIAL_8250_CONSOLE console_config(); #endif + /* Early detection of CMP support */ + result = gcmp_probe(GCMP_BASE_ADDR, GCMP_ADDRSPACE_SZ); + #ifdef CONFIG_MIPS_CMP - register_smp_ops(&cmp_smp_ops); + if (result) + register_smp_ops(&cmp_smp_ops); #endif #ifdef CONFIG_MIPS_MT_SMP +#ifdef CONFIG_MIPS_CMP + if (!result) + register_smp_ops(&vsmp_smp_ops); +#else register_smp_ops(&vsmp_smp_ops); #endif +#endif #ifdef CONFIG_MIPS_MT_SMTC register_smp_ops(&msmtc_smp_ops); #endif diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c index bc0ba58..a8756f8 100644 --- a/arch/mips/mti-malta/malta-int.c +++ b/arch/mips/mti-malta/malta-int.c @@ -409,7 +409,7 @@ static struct gic_intr_map gic_intr_map[GIC_NUM_INTRS] = { /* * GCMP needs to be detected before any SMP initialisation */ -static int __init gcmp_probe(unsigned long addr, unsigned long size) +int __init gcmp_probe(unsigned long addr, unsigned long size) { if (gcmp_present >= 0) return gcmp_present; @@ -449,14 +449,11 @@ static void __init fill_ipi_map(void) void __init arch_init_irq(void) { - int gic_present, gcmp_present; - init_i8259_irqs(); if (!cpu_has_veic) mips_cpu_irq_init(); - gcmp_present = gcmp_probe(GCMP_BASE_ADDR, GCMP_ADDRSPACE_SZ); if (gcmp_present) { GCMPGCB(GICBA) = GIC_BASE_ADDR | GCMP_GCB_GICBA_EN_MSK; gic_present = 1; -- cgit v1.1 From eb9b5141a9815ef898ef6b6441f733e81c272600 Mon Sep 17 00:00:00 2001 From: Tim Anderson <tanderson@mvista.com> Date: Wed, 17 Jun 2009 16:40:34 -0700 Subject: MIPS: CMP: Update sync-r4k for current kernel This revises the sync-4k so it will boot and operate since the removal of expirelo from the timer code. Signed-off-by: Tim Anderson <tanderson@mvista.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/Kconfig | 2 +- arch/mips/kernel/sync-r4k.c | 31 ++++++++++++++++--------------- 2 files changed, 17 insertions(+), 16 deletions(-) (limited to 'arch') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 4368a72..df1a92a 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1656,7 +1656,7 @@ config MIPS_APSP_KSPD config MIPS_CMP bool "MIPS CMP framework support" depends on SYS_SUPPORTS_MIPS_CMP - select SYNC_R4K if BROKEN + select SYNC_R4K select SYS_SUPPORTS_SMP select SYS_SUPPORTS_SCHED_SMT if SMP select WEAK_ORDERING diff --git a/arch/mips/kernel/sync-r4k.c b/arch/mips/kernel/sync-r4k.c index 9021108..05dd170 100644 --- a/arch/mips/kernel/sync-r4k.c +++ b/arch/mips/kernel/sync-r4k.c @@ -1,7 +1,7 @@ /* * Count register synchronisation. * - * All CPUs will have their count registers synchronised to the CPU0 expirelo + * All CPUs will have their count registers synchronised to the CPU0 next time * value. This can cause a small timewarp for CPU0. All other CPU's should * not have done anything significant (but they may have had interrupts * enabled briefly - prom_smp_finish() should not be responsible for enabling @@ -13,21 +13,22 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/irqflags.h> -#include <linux/r4k-timer.h> +#include <linux/cpumask.h> +#include <asm/r4k-timer.h> #include <asm/atomic.h> #include <asm/barrier.h> -#include <asm/cpumask.h> #include <asm/mipsregs.h> -static atomic_t __initdata count_start_flag = ATOMIC_INIT(0); -static atomic_t __initdata count_count_start = ATOMIC_INIT(0); -static atomic_t __initdata count_count_stop = ATOMIC_INIT(0); +static atomic_t __cpuinitdata count_start_flag = ATOMIC_INIT(0); +static atomic_t __cpuinitdata count_count_start = ATOMIC_INIT(0); +static atomic_t __cpuinitdata count_count_stop = ATOMIC_INIT(0); +static atomic_t __cpuinitdata count_reference = ATOMIC_INIT(0); #define COUNTON 100 #define NR_LOOPS 5 -void __init synchronise_count_master(void) +void __cpuinit synchronise_count_master(void) { int i; unsigned long flags; @@ -42,19 +43,20 @@ void __init synchronise_count_master(void) return; #endif - pr_info("Checking COUNT synchronization across %u CPUs: ", - num_online_cpus()); + printk(KERN_INFO "Synchronize counters across %u CPUs: ", + num_online_cpus()); local_irq_save(flags); /* * Notify the slaves that it's time to start */ + atomic_set(&count_reference, read_c0_count()); atomic_set(&count_start_flag, 1); smp_wmb(); - /* Count will be initialised to expirelo for all CPU's */ - initcount = expirelo; + /* Count will be initialised to current timer for all CPU's */ + initcount = read_c0_count(); /* * We loop a few times to get a primed instruction cache, @@ -106,7 +108,7 @@ void __init synchronise_count_master(void) printk("done.\n"); } -void __init synchronise_count_slave(void) +void __cpuinit synchronise_count_slave(void) { int i; unsigned long flags; @@ -131,8 +133,8 @@ void __init synchronise_count_slave(void) while (!atomic_read(&count_start_flag)) mb(); - /* Count will be initialised to expirelo for all CPU's */ - initcount = expirelo; + /* Count will be initialised to next expire for all CPU's */ + initcount = atomic_read(&count_reference); ncpus = num_online_cpus(); for (i = 0; i < NR_LOOPS; i++) { @@ -156,4 +158,3 @@ void __init synchronise_count_slave(void) local_irq_restore(flags); } #undef NR_LOOPS -#endif -- cgit v1.1 From cad9bc69048b073023366ebb0878c1dd64a2c4d9 Mon Sep 17 00:00:00 2001 From: Yong Zhang <yong.zhang@windriver.com> Date: Wed, 1 Jul 2009 09:35:39 +0800 Subject: MIPS: 64-bit: Fix o32 core dump If an o32 process generates a core dump on a 64 bit kernel, the core file will not be correctly recognized. This is because ELF_CORE_COPY_REGS and ELF_CORE_COPY_TASK_REGS are not correctly defined for o32 and will use the default register set which would be CONFIG_64BIT in asm/elf.h. So we'll switch to use the right register defines in this situation by checking for WANT_COMPAT_REG_H and use the right defines of ELF_CORE_COPY_REGS and ELF_CORE_COPY_TASK_REGS. [Ralf: made ELF_CORE_COPY_TASK_REGS() bullet-proof against funny arguments.] Signed-off-by: Yong Zhang <yong.zhang@windriver.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/include/asm/elf.h | 4 ++++ arch/mips/include/asm/reg.h | 2 +- arch/mips/kernel/binfmt_elfo32.c | 20 +++++++++++++++++--- 3 files changed, 22 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/mips/include/asm/elf.h b/arch/mips/include/asm/elf.h index d58f128..7990694 100644 --- a/arch/mips/include/asm/elf.h +++ b/arch/mips/include/asm/elf.h @@ -316,9 +316,13 @@ extern void elf_dump_regs(elf_greg_t *, struct pt_regs *regs); extern int dump_task_regs(struct task_struct *, elf_gregset_t *); extern int dump_task_fpu(struct task_struct *, elf_fpregset_t *); +#ifndef ELF_CORE_COPY_REGS #define ELF_CORE_COPY_REGS(elf_regs, regs) \ elf_dump_regs((elf_greg_t *)&(elf_regs), regs); +#endif +#ifndef ELF_CORE_COPY_TASK_REGS #define ELF_CORE_COPY_TASK_REGS(tsk, elf_regs) dump_task_regs(tsk, elf_regs) +#endif #define ELF_CORE_COPY_FPREGS(tsk, elf_fpregs) \ dump_task_fpu(tsk, elf_fpregs) diff --git a/arch/mips/include/asm/reg.h b/arch/mips/include/asm/reg.h index 634b55d..910e71a 100644 --- a/arch/mips/include/asm/reg.h +++ b/arch/mips/include/asm/reg.h @@ -69,7 +69,7 @@ #endif -#ifdef CONFIG_64BIT +#if defined(CONFIG_64BIT) && !defined(WANT_COMPAT_REG_H) #define EF_R0 0 #define EF_R1 1 diff --git a/arch/mips/kernel/binfmt_elfo32.c b/arch/mips/kernel/binfmt_elfo32.c index e1333d7..ff44823 100644 --- a/arch/mips/kernel/binfmt_elfo32.c +++ b/arch/mips/kernel/binfmt_elfo32.c @@ -53,6 +53,23 @@ typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG]; #define ELF_ET_DYN_BASE (TASK32_SIZE / 3 * 2) #include <asm/processor.h> + +/* + * When this file is selected, we are definitely running a 64bit kernel. + * So using the right regs define in asm/reg.h + */ +#define WANT_COMPAT_REG_H + +/* These MUST be defined before elf.h gets included */ +extern void elf32_core_copy_regs(elf_gregset_t grp, struct pt_regs *regs); +#define ELF_CORE_COPY_REGS(_dest, _regs) elf32_core_copy_regs(_dest, _regs); +#define ELF_CORE_COPY_TASK_REGS(_tsk, _dest) \ +({ \ + int __res = 1; \ + elf32_core_copy_regs(*(_dest), task_pt_regs(_tsk)); \ + __res; \ +}) + #include <linux/module.h> #include <linux/elfcore.h> #include <linux/compat.h> @@ -110,9 +127,6 @@ jiffies_to_compat_timeval(unsigned long jiffies, struct compat_timeval *value) value->tv_usec = rem / NSEC_PER_USEC; } -#undef ELF_CORE_COPY_REGS -#define ELF_CORE_COPY_REGS(_dest, _regs) elf32_core_copy_regs(_dest, _regs); - void elf32_core_copy_regs(elf_gregset_t grp, struct pt_regs *regs) { int i; -- cgit v1.1 From 3f5b3e17f791ba27f91fc4fdc514e7704d4d6273 Mon Sep 17 00:00:00 2001 From: Ralf Baechle <ralf@linux-mips.org> Date: Thu, 2 Jul 2009 11:48:07 +0100 Subject: MIPS: Allow suspend and hibernation again on uniprocessor kernels. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Pavel Machek <pavel@ucw.cz> --- arch/mips/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index df1a92a..3ca0fe1 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -2168,11 +2168,11 @@ menu "Power management options" config ARCH_HIBERNATION_POSSIBLE def_bool y - depends on SYS_SUPPORTS_HOTPLUG_CPU + depends on SYS_SUPPORTS_HOTPLUG_CPU || !SMP config ARCH_SUSPEND_POSSIBLE def_bool y - depends on SYS_SUPPORTS_HOTPLUG_CPU + depends on SYS_SUPPORTS_HOTPLUG_CPU || !SMP source "kernel/power/Kconfig" -- cgit v1.1 From ada8e9514b5880f81cdbbd212d121380ceef7acc Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa <yuasa@linux-mips.org> Date: Fri, 3 Jul 2009 00:39:38 +0900 Subject: Update Yoichi Yuasa's e-mail address Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/cobalt/buttons.c | 2 +- arch/mips/cobalt/lcd.c | 2 +- arch/mips/cobalt/led.c | 2 +- arch/mips/cobalt/mtd.c | 2 +- arch/mips/cobalt/rtc.c | 2 +- arch/mips/cobalt/serial.c | 2 +- arch/mips/cobalt/time.c | 2 +- arch/mips/gt64120/wrppmc/serial.c | 2 +- arch/mips/include/asm/ds1287.h | 2 +- arch/mips/include/asm/irq_gt641xx.h | 2 +- arch/mips/include/asm/mach-cobalt/irq.h | 2 +- arch/mips/include/asm/mach-cobalt/mach-gt64120.h | 2 +- arch/mips/include/asm/vr41xx/capcella.h | 2 +- arch/mips/include/asm/vr41xx/giu.h | 2 +- arch/mips/include/asm/vr41xx/irq.h | 2 +- arch/mips/include/asm/vr41xx/mpc30x.h | 2 +- arch/mips/include/asm/vr41xx/pci.h | 2 +- arch/mips/include/asm/vr41xx/siu.h | 2 +- arch/mips/include/asm/vr41xx/tb0219.h | 2 +- arch/mips/include/asm/vr41xx/tb0226.h | 2 +- arch/mips/include/asm/vr41xx/vr41xx.h | 2 +- arch/mips/kernel/cevt-ds1287.c | 2 +- arch/mips/kernel/cevt-gt641xx.c | 2 +- arch/mips/kernel/csrc-ioasic.c | 2 +- arch/mips/kernel/irq-gt641xx.c | 2 +- arch/mips/pci/fixup-capcella.c | 2 +- arch/mips/pci/fixup-mpc30x.c | 2 +- arch/mips/pci/fixup-tb0219.c | 2 +- arch/mips/pci/fixup-tb0226.c | 2 +- arch/mips/pci/fixup-tb0287.c | 2 +- arch/mips/pci/ops-vr41xx.c | 6 +++--- arch/mips/pci/pci-vr41xx.c | 6 +++--- arch/mips/pci/pci-vr41xx.h | 4 ++-- arch/mips/vr41xx/casio-e55/setup.c | 2 +- arch/mips/vr41xx/common/bcu.c | 8 ++++---- arch/mips/vr41xx/common/cmu.c | 8 ++++---- arch/mips/vr41xx/common/giu.c | 2 +- arch/mips/vr41xx/common/icu.c | 8 ++++---- arch/mips/vr41xx/common/init.c | 2 +- arch/mips/vr41xx/common/irq.c | 2 +- arch/mips/vr41xx/common/pmu.c | 2 +- arch/mips/vr41xx/common/rtc.c | 2 +- arch/mips/vr41xx/common/siu.c | 2 +- arch/mips/vr41xx/common/type.c | 2 +- arch/mips/vr41xx/ibm-workpad/setup.c | 2 +- 45 files changed, 59 insertions(+), 59 deletions(-) (limited to 'arch') diff --git a/arch/mips/cobalt/buttons.c b/arch/mips/cobalt/buttons.c index 9e14398..4eaec8b4 100644 --- a/arch/mips/cobalt/buttons.c +++ b/arch/mips/cobalt/buttons.c @@ -1,7 +1,7 @@ /* * Cobalt buttons platform device. * - * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/cobalt/lcd.c b/arch/mips/cobalt/lcd.c index 0720e4f..0f1cd90 100644 --- a/arch/mips/cobalt/lcd.c +++ b/arch/mips/cobalt/lcd.c @@ -1,7 +1,7 @@ /* * Registration of Cobalt LCD platform device. * - * Copyright (C) 2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2008 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/cobalt/led.c b/arch/mips/cobalt/led.c index 1c6ebd4..d3ce6fa 100644 --- a/arch/mips/cobalt/led.c +++ b/arch/mips/cobalt/led.c @@ -1,7 +1,7 @@ /* * Registration of Cobalt LED platform device. * - * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/cobalt/mtd.c b/arch/mips/cobalt/mtd.c index 2b088ef..691d620 100644 --- a/arch/mips/cobalt/mtd.c +++ b/arch/mips/cobalt/mtd.c @@ -1,7 +1,7 @@ /* * Registration of Cobalt MTD device. * - * Copyright (C) 2006 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2006 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/cobalt/rtc.c b/arch/mips/cobalt/rtc.c index e70794b..3ab3989 100644 --- a/arch/mips/cobalt/rtc.c +++ b/arch/mips/cobalt/rtc.c @@ -1,7 +1,7 @@ /* * Registration of Cobalt RTC platform device. * - * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/cobalt/serial.c b/arch/mips/cobalt/serial.c index 53b8d0d..7cb51f5 100644 --- a/arch/mips/cobalt/serial.c +++ b/arch/mips/cobalt/serial.c @@ -1,7 +1,7 @@ /* * Registration of Cobalt UART platform device. * - * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/cobalt/time.c b/arch/mips/cobalt/time.c index 4a570e7..0162f9e 100644 --- a/arch/mips/cobalt/time.c +++ b/arch/mips/cobalt/time.c @@ -1,7 +1,7 @@ /* * Cobalt time initialization. * - * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/gt64120/wrppmc/serial.c b/arch/mips/gt64120/wrppmc/serial.c index 5ec1c2f..6f9d085 100644 --- a/arch/mips/gt64120/wrppmc/serial.c +++ b/arch/mips/gt64120/wrppmc/serial.c @@ -1,7 +1,7 @@ /* * Registration of WRPPMC UART platform device. * - * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/include/asm/ds1287.h b/arch/mips/include/asm/ds1287.h index ba1702e..3af0b8f 100644 --- a/arch/mips/include/asm/ds1287.h +++ b/arch/mips/include/asm/ds1287.h @@ -1,7 +1,7 @@ /* * DS1287 timer functions. * - * Copyright (C) 2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2008 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/include/asm/irq_gt641xx.h b/arch/mips/include/asm/irq_gt641xx.h index f9a7c3a..250a240 100644 --- a/arch/mips/include/asm/irq_gt641xx.h +++ b/arch/mips/include/asm/irq_gt641xx.h @@ -1,7 +1,7 @@ /* * Galileo/Marvell GT641xx IRQ definitions. * - * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/include/asm/mach-cobalt/irq.h b/arch/mips/include/asm/mach-cobalt/irq.h index 57c8c9a..9da9acf 100644 --- a/arch/mips/include/asm/mach-cobalt/irq.h +++ b/arch/mips/include/asm/mach-cobalt/irq.h @@ -8,7 +8,7 @@ * Copyright (C) 1997 Cobalt Microserver * Copyright (C) 1997, 2003 Ralf Baechle * Copyright (C) 2001-2003 Liam Davies (ldavies@agile.tv) - * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org> */ #ifndef _ASM_COBALT_IRQ_H #define _ASM_COBALT_IRQ_H diff --git a/arch/mips/include/asm/mach-cobalt/mach-gt64120.h b/arch/mips/include/asm/mach-cobalt/mach-gt64120.h index ae9c552..f8afec3 100644 --- a/arch/mips/include/asm/mach-cobalt/mach-gt64120.h +++ b/arch/mips/include/asm/mach-cobalt/mach-gt64120.h @@ -1,5 +1,5 @@ /* - * Copyright (C) 2006 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2006 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/include/asm/vr41xx/capcella.h b/arch/mips/include/asm/vr41xx/capcella.h index e0ee05a..fcc6569 100644 --- a/arch/mips/include/asm/vr41xx/capcella.h +++ b/arch/mips/include/asm/vr41xx/capcella.h @@ -1,7 +1,7 @@ /* * capcella.h, Include file for ZAO Networks Capcella. * - * Copyright (C) 2002-2004 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2002-2004 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/include/asm/vr41xx/giu.h b/arch/mips/include/asm/vr41xx/giu.h index b369c09..6a90bc1 100644 --- a/arch/mips/include/asm/vr41xx/giu.h +++ b/arch/mips/include/asm/vr41xx/giu.h @@ -1,7 +1,7 @@ /* * Include file for NEC VR4100 series General-purpose I/O Unit. * - * Copyright (C) 2005-2009 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2005-2009 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/include/asm/vr41xx/irq.h b/arch/mips/include/asm/vr41xx/irq.h index d315dfb..b07f732 100644 --- a/arch/mips/include/asm/vr41xx/irq.h +++ b/arch/mips/include/asm/vr41xx/irq.h @@ -7,7 +7,7 @@ * Copyright (C) 2001, 2002 Paul Mundt * Copyright (C) 2002 MontaVista Software, Inc. * Copyright (C) 2002 TimeSys Corp. - * Copyright (C) 2003-2006 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2003-2006 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the diff --git a/arch/mips/include/asm/vr41xx/mpc30x.h b/arch/mips/include/asm/vr41xx/mpc30x.h index 1d67df8..130d09d 100644 --- a/arch/mips/include/asm/vr41xx/mpc30x.h +++ b/arch/mips/include/asm/vr41xx/mpc30x.h @@ -1,7 +1,7 @@ /* * mpc30x.h, Include file for Victor MP-C303/304. * - * Copyright (C) 2002-2004 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2002-2004 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/include/asm/vr41xx/pci.h b/arch/mips/include/asm/vr41xx/pci.h index 6fc01ce..c231a3d 100644 --- a/arch/mips/include/asm/vr41xx/pci.h +++ b/arch/mips/include/asm/vr41xx/pci.h @@ -1,7 +1,7 @@ /* * Include file for NEC VR4100 series PCI Control Unit. * - * Copyright (C) 2004-2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2004-2005 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/include/asm/vr41xx/siu.h b/arch/mips/include/asm/vr41xx/siu.h index da9f6e3..ca806bc 100644 --- a/arch/mips/include/asm/vr41xx/siu.h +++ b/arch/mips/include/asm/vr41xx/siu.h @@ -1,7 +1,7 @@ /* * Include file for NEC VR4100 series Serial Interface Unit. * - * Copyright (C) 2005-2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2005-2008 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/include/asm/vr41xx/tb0219.h b/arch/mips/include/asm/vr41xx/tb0219.h index dc981b4..c78e824 100644 --- a/arch/mips/include/asm/vr41xx/tb0219.h +++ b/arch/mips/include/asm/vr41xx/tb0219.h @@ -1,7 +1,7 @@ /* * tb0219.h, Include file for TANBAC TB0219. * - * Copyright (C) 2002-2004 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2002-2004 Yoichi Yuasa <yuasa@linux-mips.org> * * Modified for TANBAC TB0219: * Copyright (C) 2003 Megasolution Inc. <matsu@megasolution.jp> diff --git a/arch/mips/include/asm/vr41xx/tb0226.h b/arch/mips/include/asm/vr41xx/tb0226.h index de527dc..36f5f79 100644 --- a/arch/mips/include/asm/vr41xx/tb0226.h +++ b/arch/mips/include/asm/vr41xx/tb0226.h @@ -1,7 +1,7 @@ /* * tb0226.h, Include file for TANBAC TB0226. * - * Copyright (C) 2002-2004 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2002-2004 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/include/asm/vr41xx/vr41xx.h b/arch/mips/include/asm/vr41xx/vr41xx.h index 22be649..7b96a43 100644 --- a/arch/mips/include/asm/vr41xx/vr41xx.h +++ b/arch/mips/include/asm/vr41xx/vr41xx.h @@ -7,7 +7,7 @@ * Copyright (C) 2001, 2002 Paul Mundt * Copyright (C) 2002 MontaVista Software, Inc. * Copyright (C) 2002 TimeSys Corp. - * Copyright (C) 2003-2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2003-2008 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the diff --git a/arch/mips/kernel/cevt-ds1287.c b/arch/mips/kernel/cevt-ds1287.c index 1ada45e..6996da4 100644 --- a/arch/mips/kernel/cevt-ds1287.c +++ b/arch/mips/kernel/cevt-ds1287.c @@ -1,7 +1,7 @@ /* * DS1287 clockevent driver * - * Copyright (C) 2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2008 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/kernel/cevt-gt641xx.c b/arch/mips/kernel/cevt-gt641xx.c index e9b787f..92351e0 100644 --- a/arch/mips/kernel/cevt-gt641xx.c +++ b/arch/mips/kernel/cevt-gt641xx.c @@ -1,7 +1,7 @@ /* * GT641xx clockevent routines. * - * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/kernel/csrc-ioasic.c b/arch/mips/kernel/csrc-ioasic.c index b551f48..23da108 100644 --- a/arch/mips/kernel/csrc-ioasic.c +++ b/arch/mips/kernel/csrc-ioasic.c @@ -1,7 +1,7 @@ /* * DEC I/O ASIC's counter clocksource * - * Copyright (C) 2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2008 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/kernel/irq-gt641xx.c b/arch/mips/kernel/irq-gt641xx.c index 1b81b13..ebcc5f7 100644 --- a/arch/mips/kernel/irq-gt641xx.c +++ b/arch/mips/kernel/irq-gt641xx.c @@ -1,7 +1,7 @@ /* * GT641xx IRQ routines. * - * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/pci/fixup-capcella.c b/arch/mips/pci/fixup-capcella.c index 1416bca..1c02f57 100644 --- a/arch/mips/pci/fixup-capcella.c +++ b/arch/mips/pci/fixup-capcella.c @@ -1,7 +1,7 @@ /* * fixup-cappcela.c, The ZAO Networks Capcella specific PCI fixups. * - * Copyright (C) 2002,2004 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2002,2004 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/pci/fixup-mpc30x.c b/arch/mips/pci/fixup-mpc30x.c index 5911596..e08f49c 100644 --- a/arch/mips/pci/fixup-mpc30x.c +++ b/arch/mips/pci/fixup-mpc30x.c @@ -1,7 +1,7 @@ /* * fixup-mpc30x.c, The Victor MP-C303/304 specific PCI fixups. * - * Copyright (C) 2002,2004 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2002,2004 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/pci/fixup-tb0219.c b/arch/mips/pci/fixup-tb0219.c index ed87733..8084b17 100644 --- a/arch/mips/pci/fixup-tb0219.c +++ b/arch/mips/pci/fixup-tb0219.c @@ -2,7 +2,7 @@ * fixup-tb0219.c, The TANBAC TB0219 specific PCI fixups. * * Copyright (C) 2003 Megasolution Inc. <matsu@megasolution.jp> - * Copyright (C) 2004-2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2004-2005 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/pci/fixup-tb0226.c b/arch/mips/pci/fixup-tb0226.c index e3eedf4..4196ccf 100644 --- a/arch/mips/pci/fixup-tb0226.c +++ b/arch/mips/pci/fixup-tb0226.c @@ -1,7 +1,7 @@ /* * fixup-tb0226.c, The TANBAC TB0226 specific PCI fixups. * - * Copyright (C) 2002-2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2002-2005 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/pci/fixup-tb0287.c b/arch/mips/pci/fixup-tb0287.c index 267ab3d..2fe29db 100644 --- a/arch/mips/pci/fixup-tb0287.c +++ b/arch/mips/pci/fixup-tb0287.c @@ -1,7 +1,7 @@ /* * fixup-tb0287.c, The TANBAC TB0287 specific PCI fixups. * - * Copyright (C) 2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2005 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/pci/ops-vr41xx.c b/arch/mips/pci/ops-vr41xx.c index 900c6b3..28962a7 100644 --- a/arch/mips/pci/ops-vr41xx.c +++ b/arch/mips/pci/ops-vr41xx.c @@ -2,8 +2,8 @@ * ops-vr41xx.c, PCI configuration routines for the PCIU of NEC VR4100 series. * * Copyright (C) 2001-2003 MontaVista Software Inc. - * Author: Yoichi Yuasa <yyuasa@mvista.com or source@mvista.com> - * Copyright (C) 2004-2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Author: Yoichi Yuasa <source@mvista.com> + * Copyright (C) 2004-2005 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -21,7 +21,7 @@ */ /* * Changes: - * MontaVista Software Inc. <yyuasa@mvista.com> or <source@mvista.com> + * MontaVista Software Inc. <source@mvista.com> * - New creation, NEC VR4122 and VR4131 are supported. */ #include <linux/pci.h> diff --git a/arch/mips/pci/pci-vr41xx.c b/arch/mips/pci/pci-vr41xx.c index d1e049b..5652571 100644 --- a/arch/mips/pci/pci-vr41xx.c +++ b/arch/mips/pci/pci-vr41xx.c @@ -2,8 +2,8 @@ * pci-vr41xx.c, PCI Control Unit routines for the NEC VR4100 series. * * Copyright (C) 2001-2003 MontaVista Software Inc. - * Author: Yoichi Yuasa <yyuasa@mvista.com or source@mvista.com> - * Copyright (C) 2004-2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Author: Yoichi Yuasa <source@mvista.com> + * Copyright (C) 2004-2008 Yoichi Yuasa <yuasa@linux-mips.org> * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org) * * This program is free software; you can redistribute it and/or modify @@ -22,7 +22,7 @@ */ /* * Changes: - * MontaVista Software Inc. <yyuasa@mvista.com> or <source@mvista.com> + * MontaVista Software Inc. <source@mvista.com> * - New creation, NEC VR4122 and VR4131 are supported. */ #include <linux/init.h> diff --git a/arch/mips/pci/pci-vr41xx.h b/arch/mips/pci/pci-vr41xx.h index 8a35e32..6b1ae2e 100644 --- a/arch/mips/pci/pci-vr41xx.h +++ b/arch/mips/pci/pci-vr41xx.h @@ -2,8 +2,8 @@ * pci-vr41xx.h, Include file for PCI Control Unit of the NEC VR4100 series. * * Copyright (C) 2002 MontaVista Software Inc. - * Author: Yoichi Yuasa <yyuasa@mvista.com or source@mvista.com> - * Copyright (C) 2004-2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Author: Yoichi Yuasa <source@mvista.com> + * Copyright (C) 2004-2005 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/vr41xx/casio-e55/setup.c b/arch/mips/vr41xx/casio-e55/setup.c index 6d9bab8..719f4a5 100644 --- a/arch/mips/vr41xx/casio-e55/setup.c +++ b/arch/mips/vr41xx/casio-e55/setup.c @@ -1,7 +1,7 @@ /* * setup.c, Setup for the CASIO CASSIOPEIA E-11/15/55/65. * - * Copyright (C) 2002-2006 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2002-2006 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/vr41xx/common/bcu.c b/arch/mips/vr41xx/common/bcu.c index d77c330..6346c59 100644 --- a/arch/mips/vr41xx/common/bcu.c +++ b/arch/mips/vr41xx/common/bcu.c @@ -2,8 +2,8 @@ * bcu.c, Bus Control Unit routines for the NEC VR4100 series. * * Copyright (C) 2002 MontaVista Software Inc. - * Author: Yoichi Yuasa <yyuasa@mvista.com, or source@mvista.com> - * Copyright (C) 2003-2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Author: Yoichi Yuasa <source@mvista.com> + * Copyright (C) 2003-2005 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -21,11 +21,11 @@ */ /* * Changes: - * MontaVista Software Inc. <yyuasa@mvista.com> or <source@mvista.com> + * MontaVista Software Inc. <source@mvista.com> * - New creation, NEC VR4122 and VR4131 are supported. * - Added support for NEC VR4111 and VR4121. * - * Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Yoichi Yuasa <yuasa@linux-mips.org> * - Added support for NEC VR4133. */ #include <linux/kernel.h> diff --git a/arch/mips/vr41xx/common/cmu.c b/arch/mips/vr41xx/common/cmu.c index ad0e8e3..8ba7d04 100644 --- a/arch/mips/vr41xx/common/cmu.c +++ b/arch/mips/vr41xx/common/cmu.c @@ -2,8 +2,8 @@ * cmu.c, Clock Mask Unit routines for the NEC VR4100 series. * * Copyright (C) 2001-2002 MontaVista Software Inc. - * Author: Yoichi Yuasa <yyuasa@mvista.com or source@mvista.com> - * Copuright (C) 2003-2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Author: Yoichi Yuasa <source@mvista.com> + * Copuright (C) 2003-2005 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -21,11 +21,11 @@ */ /* * Changes: - * MontaVista Software Inc. <yyuasa@mvista.com> or <source@mvista.com> + * MontaVista Software Inc. <source@mvista.com> * - New creation, NEC VR4122 and VR4131 are supported. * - Added support for NEC VR4111 and VR4121. * - * Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Yoichi Yuasa <yuasa@linux-mips.org> * - Added support for NEC VR4133. */ #include <linux/init.h> diff --git a/arch/mips/vr41xx/common/giu.c b/arch/mips/vr41xx/common/giu.c index 2b272f1..22cc6f2 100644 --- a/arch/mips/vr41xx/common/giu.c +++ b/arch/mips/vr41xx/common/giu.c @@ -1,7 +1,7 @@ /* * NEC VR4100 series GIU platform device. * - * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/vr41xx/common/icu.c b/arch/mips/vr41xx/common/icu.c index 3f23d9f..6d39e22 100644 --- a/arch/mips/vr41xx/common/icu.c +++ b/arch/mips/vr41xx/common/icu.c @@ -2,8 +2,8 @@ * icu.c, Interrupt Control Unit routines for the NEC VR4100 series. * * Copyright (C) 2001-2002 MontaVista Software Inc. - * Author: Yoichi Yuasa <yyuasa@mvista.com or source@mvista.com> - * Copyright (C) 2003-2006 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Author: Yoichi Yuasa <source@mvista.com> + * Copyright (C) 2003-2006 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -21,11 +21,11 @@ */ /* * Changes: - * MontaVista Software Inc. <yyuasa@mvista.com> or <source@mvista.com> + * MontaVista Software Inc. <source@mvista.com> * - New creation, NEC VR4122 and VR4131 are supported. * - Added support for NEC VR4111 and VR4121. * - * Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Yoichi Yuasa <yuasa@linux-mips.org> * - Coped with INTASSIGN of NEC VR4133. */ #include <linux/errno.h> diff --git a/arch/mips/vr41xx/common/init.c b/arch/mips/vr41xx/common/init.c index c649953..1386e6f 100644 --- a/arch/mips/vr41xx/common/init.c +++ b/arch/mips/vr41xx/common/init.c @@ -1,7 +1,7 @@ /* * init.c, Common initialization routines for NEC VR4100 series. * - * Copyright (C) 2003-2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2003-2008 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/vr41xx/common/irq.c b/arch/mips/vr41xx/common/irq.c index 9cc3891..bef0687 100644 --- a/arch/mips/vr41xx/common/irq.c +++ b/arch/mips/vr41xx/common/irq.c @@ -1,7 +1,7 @@ /* * Interrupt handing routines for NEC VR4100 series. * - * Copyright (C) 2005-2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2005-2007 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/vr41xx/common/pmu.c b/arch/mips/vr41xx/common/pmu.c index 028aaf7..692b4e8 100644 --- a/arch/mips/vr41xx/common/pmu.c +++ b/arch/mips/vr41xx/common/pmu.c @@ -1,7 +1,7 @@ /* * pmu.c, Power Management Unit routines for NEC VR4100 series. * - * Copyright (C) 2003-2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2003-2007 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/vr41xx/common/rtc.c b/arch/mips/vr41xx/common/rtc.c index 9f26c14..ebc5dcf 100644 --- a/arch/mips/vr41xx/common/rtc.c +++ b/arch/mips/vr41xx/common/rtc.c @@ -1,7 +1,7 @@ /* * NEC VR4100 series RTC platform device. * - * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/vr41xx/common/siu.c b/arch/mips/vr41xx/common/siu.c index 654dee6..54eae56 100644 --- a/arch/mips/vr41xx/common/siu.c +++ b/arch/mips/vr41xx/common/siu.c @@ -1,7 +1,7 @@ /* * NEC VR4100 series SIU platform device. * - * Copyright (C) 2007-2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2007-2008 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/vr41xx/common/type.c b/arch/mips/vr41xx/common/type.c index e0c1ac5..ff84142 100644 --- a/arch/mips/vr41xx/common/type.c +++ b/arch/mips/vr41xx/common/type.c @@ -1,7 +1,7 @@ /* * type.c, System type for NEC VR4100 series. * - * Copyright (C) 2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2005 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/vr41xx/ibm-workpad/setup.c b/arch/mips/vr41xx/ibm-workpad/setup.c index 9eef297..3982f37 100644 --- a/arch/mips/vr41xx/ibm-workpad/setup.c +++ b/arch/mips/vr41xx/ibm-workpad/setup.c @@ -1,7 +1,7 @@ /* * setup.c, Setup for the IBM WorkPad z50. * - * Copyright (C) 2002-2006 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2002-2006 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by -- cgit v1.1 From 01a6221a6a51ec47b9ae3ed42c396f98dd488c7e Mon Sep 17 00:00:00 2001 From: David Daney <ddaney@caviumnetworks.com> Date: Mon, 29 Jun 2009 17:18:51 -0700 Subject: MIPS: Reorganize Cavium OCTEON PCI support. Move the cavium PCI files to the arch/mips/pci directory. Also cleanup comment formatting and code layout. Code from pci-common.c, was moved into other files. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/cavium-octeon/Makefile | 4 - arch/mips/cavium-octeon/dma-octeon.c | 2 +- arch/mips/cavium-octeon/msi.c | 288 ------ arch/mips/cavium-octeon/pci-common.c | 137 --- arch/mips/cavium-octeon/pci-common.h | 39 - arch/mips/cavium-octeon/pci.c | 568 ------------ arch/mips/cavium-octeon/pcie.c | 1370 ----------------------------- arch/mips/include/asm/octeon/pci-octeon.h | 45 + arch/mips/pci/Makefile | 5 + arch/mips/pci/msi-octeon.c | 288 ++++++ arch/mips/pci/pci-octeon.c | 675 ++++++++++++++ arch/mips/pci/pcie-octeon.c | 1369 ++++++++++++++++++++++++++++ 12 files changed, 2383 insertions(+), 2407 deletions(-) delete mode 100644 arch/mips/cavium-octeon/msi.c delete mode 100644 arch/mips/cavium-octeon/pci-common.c delete mode 100644 arch/mips/cavium-octeon/pci-common.h delete mode 100644 arch/mips/cavium-octeon/pci.c delete mode 100644 arch/mips/cavium-octeon/pcie.c create mode 100644 arch/mips/include/asm/octeon/pci-octeon.h create mode 100644 arch/mips/pci/msi-octeon.c create mode 100644 arch/mips/pci/pci-octeon.c create mode 100644 arch/mips/pci/pcie-octeon.c (limited to 'arch') diff --git a/arch/mips/cavium-octeon/Makefile b/arch/mips/cavium-octeon/Makefile index 7c0528b..d6903c3 100644 --- a/arch/mips/cavium-octeon/Makefile +++ b/arch/mips/cavium-octeon/Makefile @@ -14,9 +14,5 @@ obj-y += dma-octeon.o flash_setup.o obj-y += octeon-memcpy.o obj-$(CONFIG_SMP) += smp.o -obj-$(CONFIG_PCI) += pci-common.o -obj-$(CONFIG_PCI) += pci.o -obj-$(CONFIG_PCI) += pcie.o -obj-$(CONFIG_PCI_MSI) += msi.o EXTRA_CFLAGS += -Werror diff --git a/arch/mips/cavium-octeon/dma-octeon.c b/arch/mips/cavium-octeon/dma-octeon.c index 627c162..4b92bfc 100644 --- a/arch/mips/cavium-octeon/dma-octeon.c +++ b/arch/mips/cavium-octeon/dma-octeon.c @@ -29,7 +29,7 @@ #include <dma-coherence.h> #ifdef CONFIG_PCI -#include "pci-common.h" +#include <asm/octeon/pci-octeon.h> #endif #define BAR2_PCI_ADDRESS 0x8000000000ul diff --git a/arch/mips/cavium-octeon/msi.c b/arch/mips/cavium-octeon/msi.c deleted file mode 100644 index 964b03b..0000000 --- a/arch/mips/cavium-octeon/msi.c +++ /dev/null @@ -1,288 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2005-2007 Cavium Networks - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/msi.h> -#include <linux/spinlock.h> -#include <linux/interrupt.h> - -#include <asm/octeon/octeon.h> -#include <asm/octeon/cvmx-npi-defs.h> -#include <asm/octeon/cvmx-pci-defs.h> -#include <asm/octeon/cvmx-npei-defs.h> -#include <asm/octeon/cvmx-pexp-defs.h> - -#include "pci-common.h" - -/* - * Each bit in msi_free_irq_bitmask represents a MSI interrupt that is - * in use. - */ -static uint64_t msi_free_irq_bitmask; - -/* - * Each bit in msi_multiple_irq_bitmask tells that the device using - * this bit in msi_free_irq_bitmask is also using the next bit. This - * is used so we can disable all of the MSI interrupts when a device - * uses multiple. - */ -static uint64_t msi_multiple_irq_bitmask; - -/* - * This lock controls updates to msi_free_irq_bitmask and - * msi_multiple_irq_bitmask. - */ -static DEFINE_SPINLOCK(msi_free_irq_bitmask_lock); - - -/** - * Called when a driver request MSI interrupts instead of the - * legacy INT A-D. This routine will allocate multiple interrupts - * for MSI devices that support them. A device can override this by - * programming the MSI control bits [6:4] before calling - * pci_enable_msi(). - * - * @param dev Device requesting MSI interrupts - * @param desc MSI descriptor - * - * Returns 0 on success. - */ -int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc) -{ - struct msi_msg msg; - uint16_t control; - int configured_private_bits; - int request_private_bits; - int irq; - int irq_step; - uint64_t search_mask; - - /* - * Read the MSI config to figure out how many IRQs this device - * wants. Most devices only want 1, which will give - * configured_private_bits and request_private_bits equal 0. - */ - pci_read_config_word(dev, desc->msi_attrib.pos + PCI_MSI_FLAGS, - &control); - - /* - * If the number of private bits has been configured then use - * that value instead of the requested number. This gives the - * driver the chance to override the number of interrupts - * before calling pci_enable_msi(). - */ - configured_private_bits = (control & PCI_MSI_FLAGS_QSIZE) >> 4; - if (configured_private_bits == 0) { - /* Nothing is configured, so use the hardware requested size */ - request_private_bits = (control & PCI_MSI_FLAGS_QMASK) >> 1; - } else { - /* - * Use the number of configured bits, assuming the - * driver wanted to override the hardware request - * value. - */ - request_private_bits = configured_private_bits; - } - - /* - * The PCI 2.3 spec mandates that there are at most 32 - * interrupts. If this device asks for more, only give it one. - */ - if (request_private_bits > 5) - request_private_bits = 0; - -try_only_one: - /* - * The IRQs have to be aligned on a power of two based on the - * number being requested. - */ - irq_step = 1 << request_private_bits; - - /* Mask with one bit for each IRQ */ - search_mask = (1 << irq_step) - 1; - - /* - * We're going to search msi_free_irq_bitmask_lock for zero - * bits. This represents an MSI interrupt number that isn't in - * use. - */ - spin_lock(&msi_free_irq_bitmask_lock); - for (irq = 0; irq < 64; irq += irq_step) { - if ((msi_free_irq_bitmask & (search_mask << irq)) == 0) { - msi_free_irq_bitmask |= search_mask << irq; - msi_multiple_irq_bitmask |= (search_mask >> 1) << irq; - break; - } - } - spin_unlock(&msi_free_irq_bitmask_lock); - - /* Make sure the search for available interrupts didn't fail */ - if (irq >= 64) { - if (request_private_bits) { - pr_err("arch_setup_msi_irq: Unable to find %d free " - "interrupts, trying just one", - 1 << request_private_bits); - request_private_bits = 0; - goto try_only_one; - } else - panic("arch_setup_msi_irq: Unable to find a free MSI " - "interrupt"); - } - - /* MSI interrupts start at logical IRQ OCTEON_IRQ_MSI_BIT0 */ - irq += OCTEON_IRQ_MSI_BIT0; - - switch (octeon_dma_bar_type) { - case OCTEON_DMA_BAR_TYPE_SMALL: - /* When not using big bar, Bar 0 is based at 128MB */ - msg.address_lo = - ((128ul << 20) + CVMX_PCI_MSI_RCV) & 0xffffffff; - msg.address_hi = ((128ul << 20) + CVMX_PCI_MSI_RCV) >> 32; - case OCTEON_DMA_BAR_TYPE_BIG: - /* When using big bar, Bar 0 is based at 0 */ - msg.address_lo = (0 + CVMX_PCI_MSI_RCV) & 0xffffffff; - msg.address_hi = (0 + CVMX_PCI_MSI_RCV) >> 32; - break; - case OCTEON_DMA_BAR_TYPE_PCIE: - /* When using PCIe, Bar 0 is based at 0 */ - /* FIXME CVMX_NPEI_MSI_RCV* other than 0? */ - msg.address_lo = (0 + CVMX_NPEI_PCIE_MSI_RCV) & 0xffffffff; - msg.address_hi = (0 + CVMX_NPEI_PCIE_MSI_RCV) >> 32; - break; - default: - panic("arch_setup_msi_irq: Invalid octeon_dma_bar_type\n"); - } - msg.data = irq - OCTEON_IRQ_MSI_BIT0; - - /* Update the number of IRQs the device has available to it */ - control &= ~PCI_MSI_FLAGS_QSIZE; - control |= request_private_bits << 4; - pci_write_config_word(dev, desc->msi_attrib.pos + PCI_MSI_FLAGS, - control); - - set_irq_msi(irq, desc); - write_msi_msg(irq, &msg); - return 0; -} - - -/** - * Called when a device no longer needs its MSI interrupts. All - * MSI interrupts for the device are freed. - * - * @irq: The devices first irq number. There may be multple in sequence. - */ -void arch_teardown_msi_irq(unsigned int irq) -{ - int number_irqs; - uint64_t bitmask; - - if ((irq < OCTEON_IRQ_MSI_BIT0) || (irq > OCTEON_IRQ_MSI_BIT63)) - panic("arch_teardown_msi_irq: Attempted to teardown illegal " - "MSI interrupt (%d)", irq); - irq -= OCTEON_IRQ_MSI_BIT0; - - /* - * Count the number of IRQs we need to free by looking at the - * msi_multiple_irq_bitmask. Each bit set means that the next - * IRQ is also owned by this device. - */ - number_irqs = 0; - while ((irq+number_irqs < 64) && - (msi_multiple_irq_bitmask & (1ull << (irq + number_irqs)))) - number_irqs++; - number_irqs++; - /* Mask with one bit for each IRQ */ - bitmask = (1 << number_irqs) - 1; - /* Shift the mask to the correct bit location */ - bitmask <<= irq; - if ((msi_free_irq_bitmask & bitmask) != bitmask) - panic("arch_teardown_msi_irq: Attempted to teardown MSI " - "interrupt (%d) not in use", irq); - - /* Checks are done, update the in use bitmask */ - spin_lock(&msi_free_irq_bitmask_lock); - msi_free_irq_bitmask &= ~bitmask; - msi_multiple_irq_bitmask &= ~bitmask; - spin_unlock(&msi_free_irq_bitmask_lock); -} - - -/** - * Called by the interrupt handling code when an MSI interrupt - * occurs. - * - * @param cpl - * @param dev_id - * - * @return - */ -static irqreturn_t octeon_msi_interrupt(int cpl, void *dev_id) -{ - uint64_t msi_bits; - int irq; - - if (octeon_dma_bar_type == OCTEON_DMA_BAR_TYPE_PCIE) - msi_bits = cvmx_read_csr(CVMX_PEXP_NPEI_MSI_RCV0); - else - msi_bits = cvmx_read_csr(CVMX_NPI_NPI_MSI_RCV); - irq = fls64(msi_bits); - if (irq) { - irq += OCTEON_IRQ_MSI_BIT0 - 1; - if (irq_desc[irq].action) { - do_IRQ(irq); - return IRQ_HANDLED; - } else { - pr_err("Spurious MSI interrupt %d\n", irq); - if (octeon_has_feature(OCTEON_FEATURE_PCIE)) { - /* These chips have PCIe */ - cvmx_write_csr(CVMX_PEXP_NPEI_MSI_RCV0, - 1ull << (irq - - OCTEON_IRQ_MSI_BIT0)); - } else { - /* These chips have PCI */ - cvmx_write_csr(CVMX_NPI_NPI_MSI_RCV, - 1ull << (irq - - OCTEON_IRQ_MSI_BIT0)); - } - } - } - return IRQ_NONE; -} - - -/** - * Initializes the MSI interrupt handling code - * - * @return - */ -int octeon_msi_initialize(void) -{ - int r; - if (octeon_has_feature(OCTEON_FEATURE_PCIE)) { - r = request_irq(OCTEON_IRQ_PCI_MSI0, octeon_msi_interrupt, - IRQF_SHARED, - "MSI[0:63]", octeon_msi_interrupt); - } else if (octeon_is_pci_host()) { - r = request_irq(OCTEON_IRQ_PCI_MSI0, octeon_msi_interrupt, - IRQF_SHARED, - "MSI[0:15]", octeon_msi_interrupt); - r += request_irq(OCTEON_IRQ_PCI_MSI1, octeon_msi_interrupt, - IRQF_SHARED, - "MSI[16:31]", octeon_msi_interrupt); - r += request_irq(OCTEON_IRQ_PCI_MSI2, octeon_msi_interrupt, - IRQF_SHARED, - "MSI[32:47]", octeon_msi_interrupt); - r += request_irq(OCTEON_IRQ_PCI_MSI3, octeon_msi_interrupt, - IRQF_SHARED, - "MSI[48:63]", octeon_msi_interrupt); - } - return 0; -} - -subsys_initcall(octeon_msi_initialize); diff --git a/arch/mips/cavium-octeon/pci-common.c b/arch/mips/cavium-octeon/pci-common.c deleted file mode 100644 index cd029f8..0000000 --- a/arch/mips/cavium-octeon/pci-common.c +++ /dev/null @@ -1,137 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2005-2007 Cavium Networks - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/pci.h> -#include <linux/interrupt.h> -#include <linux/time.h> -#include <linux/delay.h> -#include "pci-common.h" - -typeof(pcibios_map_irq) *octeon_pcibios_map_irq; -enum octeon_dma_bar_type octeon_dma_bar_type = OCTEON_DMA_BAR_TYPE_INVALID; - -/** - * Map a PCI device to the appropriate interrupt line - * - * @param dev The Linux PCI device structure for the device to map - * @param slot The slot number for this device on __BUS 0__. Linux - * enumerates through all the bridges and figures out the - * slot on Bus 0 where this device eventually hooks to. - * @param pin The PCI interrupt pin read from the device, then swizzled - * as it goes through each bridge. - * @return Interrupt number for the device - */ -int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - if (octeon_pcibios_map_irq) - return octeon_pcibios_map_irq(dev, slot, pin); - else - panic("octeon_pcibios_map_irq doesn't point to a " - "pcibios_map_irq() function"); -} - - -/** - * Called to perform platform specific PCI setup - * - * @param dev - * @return - */ -int pcibios_plat_dev_init(struct pci_dev *dev) -{ - uint16_t config; - uint32_t dconfig; - int pos; - /* - * Force the Cache line setting to 64 bytes. The standard - * Linux bus scan doesn't seem to set it. Octeon really has - * 128 byte lines, but Intel bridges get really upset if you - * try and set values above 64 bytes. Value is specified in - * 32bit words. - */ - pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 64 / 4); - /* Set latency timers for all devices */ - pci_write_config_byte(dev, PCI_LATENCY_TIMER, 48); - - /* Enable reporting System errors and parity errors on all devices */ - /* Enable parity checking and error reporting */ - pci_read_config_word(dev, PCI_COMMAND, &config); - config |= PCI_COMMAND_PARITY | PCI_COMMAND_SERR; - pci_write_config_word(dev, PCI_COMMAND, config); - - if (dev->subordinate) { - /* Set latency timers on sub bridges */ - pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, 48); - /* More bridge error detection */ - pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &config); - config |= PCI_BRIDGE_CTL_PARITY | PCI_BRIDGE_CTL_SERR; - pci_write_config_word(dev, PCI_BRIDGE_CONTROL, config); - } - - /* Enable the PCIe normal error reporting */ - pos = pci_find_capability(dev, PCI_CAP_ID_EXP); - if (pos) { - /* Update Device Control */ - pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &config); - /* Correctable Error Reporting */ - config |= PCI_EXP_DEVCTL_CERE; - /* Non-Fatal Error Reporting */ - config |= PCI_EXP_DEVCTL_NFERE; - /* Fatal Error Reporting */ - config |= PCI_EXP_DEVCTL_FERE; - /* Unsupported Request */ - config |= PCI_EXP_DEVCTL_URRE; - pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, config); - } - - /* Find the Advanced Error Reporting capability */ - pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR); - if (pos) { - /* Clear Uncorrectable Error Status */ - pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, - &dconfig); - pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, - dconfig); - /* Enable reporting of all uncorrectable errors */ - /* Uncorrectable Error Mask - turned on bits disable errors */ - pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, 0); - /* - * Leave severity at HW default. This only controls if - * errors are reported as uncorrectable or - * correctable, not if the error is reported. - */ - /* PCI_ERR_UNCOR_SEVER - Uncorrectable Error Severity */ - /* Clear Correctable Error Status */ - pci_read_config_dword(dev, pos + PCI_ERR_COR_STATUS, &dconfig); - pci_write_config_dword(dev, pos + PCI_ERR_COR_STATUS, dconfig); - /* Enable reporting of all correctable errors */ - /* Correctable Error Mask - turned on bits disable errors */ - pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, 0); - /* Advanced Error Capabilities */ - pci_read_config_dword(dev, pos + PCI_ERR_CAP, &dconfig); - /* ECRC Generation Enable */ - if (config & PCI_ERR_CAP_ECRC_GENC) - config |= PCI_ERR_CAP_ECRC_GENE; - /* ECRC Check Enable */ - if (config & PCI_ERR_CAP_ECRC_CHKC) - config |= PCI_ERR_CAP_ECRC_CHKE; - pci_write_config_dword(dev, pos + PCI_ERR_CAP, dconfig); - /* PCI_ERR_HEADER_LOG - Header Log Register (16 bytes) */ - /* Report all errors to the root complex */ - pci_write_config_dword(dev, pos + PCI_ERR_ROOT_COMMAND, - PCI_ERR_ROOT_CMD_COR_EN | - PCI_ERR_ROOT_CMD_NONFATAL_EN | - PCI_ERR_ROOT_CMD_FATAL_EN); - /* Clear the Root status register */ - pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, &dconfig); - pci_write_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, dconfig); - } - - return 0; -} diff --git a/arch/mips/cavium-octeon/pci-common.h b/arch/mips/cavium-octeon/pci-common.h deleted file mode 100644 index 74ae799..0000000 --- a/arch/mips/cavium-octeon/pci-common.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2005-2007 Cavium Networks - */ -#ifndef __OCTEON_PCI_COMMON_H__ -#define __OCTEON_PCI_COMMON_H__ - -#include <linux/pci.h> - -/* Some PCI cards require delays when accessing config space. */ -#define PCI_CONFIG_SPACE_DELAY 10000 - -/* pcibios_map_irq() is defined inside pci-common.c. All it does is call the - Octeon specific version pointed to by this variable. This function needs to - change for PCI or PCIe based hosts */ -extern typeof(pcibios_map_irq) *octeon_pcibios_map_irq; - -/* The following defines are only used when octeon_dma_bar_type = - OCTEON_DMA_BAR_TYPE_BIG */ -#define OCTEON_PCI_BAR1_HOLE_BITS 5 -#define OCTEON_PCI_BAR1_HOLE_SIZE (1ul<<(OCTEON_PCI_BAR1_HOLE_BITS+3)) - -enum octeon_dma_bar_type { - OCTEON_DMA_BAR_TYPE_INVALID, - OCTEON_DMA_BAR_TYPE_SMALL, - OCTEON_DMA_BAR_TYPE_BIG, - OCTEON_DMA_BAR_TYPE_PCIE -}; - -/** - * This is a variable to tell the DMA mapping system in dma-octeon.c - * how to map PCI DMA addresses. - */ -extern enum octeon_dma_bar_type octeon_dma_bar_type; - -#endif diff --git a/arch/mips/cavium-octeon/pci.c b/arch/mips/cavium-octeon/pci.c deleted file mode 100644 index 67c0ff5..0000000 --- a/arch/mips/cavium-octeon/pci.c +++ /dev/null @@ -1,568 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2005-2007 Cavium Networks - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/pci.h> -#include <linux/interrupt.h> -#include <linux/time.h> -#include <linux/delay.h> - -#include <asm/time.h> - -#include <asm/octeon/octeon.h> -#include <asm/octeon/cvmx-npi-defs.h> -#include <asm/octeon/cvmx-pci-defs.h> - -#include "pci-common.h" - -#define USE_OCTEON_INTERNAL_ARBITER - -/* - * Octeon's PCI controller uses did=3, subdid=2 for PCI IO - * addresses. Use PCI endian swapping 1 so no address swapping is - * necessary. The Linux io routines will endian swap the data. - */ -#define OCTEON_PCI_IOSPACE_BASE 0x80011a0400000000ull -#define OCTEON_PCI_IOSPACE_SIZE (1ull<<32) - -/* Octeon't PCI controller uses did=3, subdid=3 for PCI memory. */ -#define OCTEON_PCI_MEMSPACE_OFFSET (0x00011b0000000000ull) - -/** - * This is the bit decoding used for the Octeon PCI controller addresses - */ -union octeon_pci_address { - uint64_t u64; - struct { - uint64_t upper:2; - uint64_t reserved:13; - uint64_t io:1; - uint64_t did:5; - uint64_t subdid:3; - uint64_t reserved2:4; - uint64_t endian_swap:2; - uint64_t reserved3:10; - uint64_t bus:8; - uint64_t dev:5; - uint64_t func:3; - uint64_t reg:8; - } s; -}; - -/** - * Return the mapping of PCI device number to IRQ line. Each - * character in the return string represents the interrupt - * line for the device at that position. Device 1 maps to the - * first character, etc. The characters A-D are used for PCI - * interrupts. - * - * Returns PCI interrupt mapping - */ -const char *octeon_get_pci_interrupts(void) -{ - /* - * Returning an empty string causes the interrupts to be - * routed based on the PCI specification. From the PCI spec: - * - * INTA# of Device Number 0 is connected to IRQW on the system - * board. (Device Number has no significance regarding being - * located on the system board or in a connector.) INTA# of - * Device Number 1 is connected to IRQX on the system - * board. INTA# of Device Number 2 is connected to IRQY on the - * system board. INTA# of Device Number 3 is connected to IRQZ - * on the system board. The table below describes how each - * agent's INTx# lines are connected to the system board - * interrupt lines. The following equation can be used to - * determine to which INTx# signal on the system board a given - * device's INTx# line(s) is connected. - * - * MB = (D + I) MOD 4 MB = System board Interrupt (IRQW = 0, - * IRQX = 1, IRQY = 2, and IRQZ = 3) D = Device Number I = - * Interrupt Number (INTA# = 0, INTB# = 1, INTC# = 2, and - * INTD# = 3) - */ - switch (octeon_bootinfo->board_type) { - case CVMX_BOARD_TYPE_NAO38: - /* This is really the NAC38 */ - return "AAAAADABAAAAAAAAAAAAAAAAAAAAAAAA"; - case CVMX_BOARD_TYPE_THUNDER: - return ""; - case CVMX_BOARD_TYPE_EBH3000: - return ""; - case CVMX_BOARD_TYPE_EBH3100: - case CVMX_BOARD_TYPE_CN3010_EVB_HS5: - case CVMX_BOARD_TYPE_CN3005_EVB_HS5: - return "AAABAAAAAAAAAAAAAAAAAAAAAAAAAAAA"; - case CVMX_BOARD_TYPE_BBGW_REF: - return "AABCD"; - default: - return ""; - } -} - -/** - * Map a PCI device to the appropriate interrupt line - * - * @dev: The Linux PCI device structure for the device to map - * @slot: The slot number for this device on __BUS 0__. Linux - * enumerates through all the bridges and figures out the - * slot on Bus 0 where this device eventually hooks to. - * @pin: The PCI interrupt pin read from the device, then swizzled - * as it goes through each bridge. - * Returns Interrupt number for the device - */ -int __init octeon_pci_pcibios_map_irq(const struct pci_dev *dev, - u8 slot, u8 pin) -{ - int irq_num; - const char *interrupts; - int dev_num; - - /* Get the board specific interrupt mapping */ - interrupts = octeon_get_pci_interrupts(); - - dev_num = dev->devfn >> 3; - if (dev_num < strlen(interrupts)) - irq_num = ((interrupts[dev_num] - 'A' + pin - 1) & 3) + - OCTEON_IRQ_PCI_INT0; - else - irq_num = ((slot + pin - 3) & 3) + OCTEON_IRQ_PCI_INT0; - return irq_num; -} - - -/** - * Read a value from configuration space - * - */ -static int octeon_read_config(struct pci_bus *bus, unsigned int devfn, - int reg, int size, u32 *val) -{ - union octeon_pci_address pci_addr; - - pci_addr.u64 = 0; - pci_addr.s.upper = 2; - pci_addr.s.io = 1; - pci_addr.s.did = 3; - pci_addr.s.subdid = 1; - pci_addr.s.endian_swap = 1; - pci_addr.s.bus = bus->number; - pci_addr.s.dev = devfn >> 3; - pci_addr.s.func = devfn & 0x7; - pci_addr.s.reg = reg; - -#if PCI_CONFIG_SPACE_DELAY - udelay(PCI_CONFIG_SPACE_DELAY); -#endif - switch (size) { - case 4: - *val = le32_to_cpu(cvmx_read64_uint32(pci_addr.u64)); - return PCIBIOS_SUCCESSFUL; - case 2: - *val = le16_to_cpu(cvmx_read64_uint16(pci_addr.u64)); - return PCIBIOS_SUCCESSFUL; - case 1: - *val = cvmx_read64_uint8(pci_addr.u64); - return PCIBIOS_SUCCESSFUL; - } - return PCIBIOS_FUNC_NOT_SUPPORTED; -} - - -/** - * Write a value to PCI configuration space - * - * @bus: - * @devfn: - * @reg: - * @size: - * @val: - * Returns - */ -static int octeon_write_config(struct pci_bus *bus, unsigned int devfn, - int reg, int size, u32 val) -{ - union octeon_pci_address pci_addr; - - pci_addr.u64 = 0; - pci_addr.s.upper = 2; - pci_addr.s.io = 1; - pci_addr.s.did = 3; - pci_addr.s.subdid = 1; - pci_addr.s.endian_swap = 1; - pci_addr.s.bus = bus->number; - pci_addr.s.dev = devfn >> 3; - pci_addr.s.func = devfn & 0x7; - pci_addr.s.reg = reg; - -#if PCI_CONFIG_SPACE_DELAY - udelay(PCI_CONFIG_SPACE_DELAY); -#endif - switch (size) { - case 4: - cvmx_write64_uint32(pci_addr.u64, cpu_to_le32(val)); - return PCIBIOS_SUCCESSFUL; - case 2: - cvmx_write64_uint16(pci_addr.u64, cpu_to_le16(val)); - return PCIBIOS_SUCCESSFUL; - case 1: - cvmx_write64_uint8(pci_addr.u64, val); - return PCIBIOS_SUCCESSFUL; - } - return PCIBIOS_FUNC_NOT_SUPPORTED; -} - - -static struct pci_ops octeon_pci_ops = { - octeon_read_config, - octeon_write_config, -}; - -static struct resource octeon_pci_mem_resource = { - .start = 0, - .end = 0, - .name = "Octeon PCI MEM", - .flags = IORESOURCE_MEM, -}; - -/* - * PCI ports must be above 16KB so the ISA bus filtering in the PCI-X to PCI - * bridge - */ -static struct resource octeon_pci_io_resource = { - .start = 0x4000, - .end = OCTEON_PCI_IOSPACE_SIZE - 1, - .name = "Octeon PCI IO", - .flags = IORESOURCE_IO, -}; - -static struct pci_controller octeon_pci_controller = { - .pci_ops = &octeon_pci_ops, - .mem_resource = &octeon_pci_mem_resource, - .mem_offset = OCTEON_PCI_MEMSPACE_OFFSET, - .io_resource = &octeon_pci_io_resource, - .io_offset = 0, - .io_map_base = OCTEON_PCI_IOSPACE_BASE, -}; - - -/** - * Low level initialize the Octeon PCI controller - * - * Returns - */ -static void octeon_pci_initialize(void) -{ - union cvmx_pci_cfg01 cfg01; - union cvmx_npi_ctl_status ctl_status; - union cvmx_pci_ctl_status_2 ctl_status_2; - union cvmx_pci_cfg19 cfg19; - union cvmx_pci_cfg16 cfg16; - union cvmx_pci_cfg22 cfg22; - union cvmx_pci_cfg56 cfg56; - - /* Reset the PCI Bus */ - cvmx_write_csr(CVMX_CIU_SOFT_PRST, 0x1); - cvmx_read_csr(CVMX_CIU_SOFT_PRST); - - udelay(2000); /* Hold PCI reset for 2 ms */ - - ctl_status.u64 = 0; /* cvmx_read_csr(CVMX_NPI_CTL_STATUS); */ - ctl_status.s.max_word = 1; - ctl_status.s.timer = 1; - cvmx_write_csr(CVMX_NPI_CTL_STATUS, ctl_status.u64); - - /* Deassert PCI reset and advertize PCX Host Mode Device Capability - (64b) */ - cvmx_write_csr(CVMX_CIU_SOFT_PRST, 0x4); - cvmx_read_csr(CVMX_CIU_SOFT_PRST); - - udelay(2000); /* Wait 2 ms after deasserting PCI reset */ - - ctl_status_2.u32 = 0; - ctl_status_2.s.tsr_hwm = 1; /* Initializes to 0. Must be set - before any PCI reads. */ - ctl_status_2.s.bar2pres = 1; /* Enable BAR2 */ - ctl_status_2.s.bar2_enb = 1; - ctl_status_2.s.bar2_cax = 1; /* Don't use L2 */ - ctl_status_2.s.bar2_esx = 1; - ctl_status_2.s.pmo_amod = 1; /* Round robin priority */ - if (octeon_dma_bar_type == OCTEON_DMA_BAR_TYPE_BIG) { - /* BAR1 hole */ - ctl_status_2.s.bb1_hole = OCTEON_PCI_BAR1_HOLE_BITS; - ctl_status_2.s.bb1_siz = 1; /* BAR1 is 2GB */ - ctl_status_2.s.bb_ca = 1; /* Don't use L2 with big bars */ - ctl_status_2.s.bb_es = 1; /* Big bar in byte swap mode */ - ctl_status_2.s.bb1 = 1; /* BAR1 is big */ - ctl_status_2.s.bb0 = 1; /* BAR0 is big */ - } - - octeon_npi_write32(CVMX_NPI_PCI_CTL_STATUS_2, ctl_status_2.u32); - udelay(2000); /* Wait 2 ms before doing PCI reads */ - - ctl_status_2.u32 = octeon_npi_read32(CVMX_NPI_PCI_CTL_STATUS_2); - pr_notice("PCI Status: %s %s-bit\n", - ctl_status_2.s.ap_pcix ? "PCI-X" : "PCI", - ctl_status_2.s.ap_64ad ? "64" : "32"); - - if (OCTEON_IS_MODEL(OCTEON_CN58XX) || OCTEON_IS_MODEL(OCTEON_CN50XX)) { - union cvmx_pci_cnt_reg cnt_reg_start; - union cvmx_pci_cnt_reg cnt_reg_end; - unsigned long cycles, pci_clock; - - cnt_reg_start.u64 = cvmx_read_csr(CVMX_NPI_PCI_CNT_REG); - cycles = read_c0_cvmcount(); - udelay(1000); - cnt_reg_end.u64 = cvmx_read_csr(CVMX_NPI_PCI_CNT_REG); - cycles = read_c0_cvmcount() - cycles; - pci_clock = (cnt_reg_end.s.pcicnt - cnt_reg_start.s.pcicnt) / - (cycles / (mips_hpt_frequency / 1000000)); - pr_notice("PCI Clock: %lu MHz\n", pci_clock); - } - - /* - * TDOMC must be set to one in PCI mode. TDOMC should be set to 4 - * in PCI-X mode to allow four oustanding splits. Otherwise, - * should not change from its reset value. Don't write PCI_CFG19 - * in PCI mode (0x82000001 reset value), write it to 0x82000004 - * after PCI-X mode is known. MRBCI,MDWE,MDRE -> must be zero. - * MRBCM -> must be one. - */ - if (ctl_status_2.s.ap_pcix) { - cfg19.u32 = 0; - /* - * Target Delayed/Split request outstanding maximum - * count. [1..31] and 0=32. NOTE: If the user - * programs these bits beyond the Designed Maximum - * outstanding count, then the designed maximum table - * depth will be used instead. No additional - * Deferred/Split transactions will be accepted if - * this outstanding maximum count is - * reached. Furthermore, no additional deferred/split - * transactions will be accepted if the I/O delay/ I/O - * Split Request outstanding maximum is reached. - */ - cfg19.s.tdomc = 4; - /* - * Master Deferred Read Request Outstanding Max Count - * (PCI only). CR4C[26:24] Max SAC cycles MAX DAC - * cycles 000 8 4 001 1 0 010 2 1 011 3 1 100 4 2 101 - * 5 2 110 6 3 111 7 3 For example, if these bits are - * programmed to 100, the core can support 2 DAC - * cycles, 4 SAC cycles or a combination of 1 DAC and - * 2 SAC cycles. NOTE: For the PCI-X maximum - * outstanding split transactions, refer to - * CRE0[22:20]. - */ - cfg19.s.mdrrmc = 2; - /* - * Master Request (Memory Read) Byte Count/Byte Enable - * select. 0 = Byte Enables valid. In PCI mode, a - * burst transaction cannot be performed using Memory - * Read command=4?h6. 1 = DWORD Byte Count valid - * (default). In PCI Mode, the memory read byte - * enables are automatically generated by the - * core. Note: N3 Master Request transaction sizes are - * always determined through the - * am_attr[<35:32>|<7:0>] field. - */ - cfg19.s.mrbcm = 1; - octeon_npi_write32(CVMX_NPI_PCI_CFG19, cfg19.u32); - } - - - cfg01.u32 = 0; - cfg01.s.msae = 1; /* Memory Space Access Enable */ - cfg01.s.me = 1; /* Master Enable */ - cfg01.s.pee = 1; /* PERR# Enable */ - cfg01.s.see = 1; /* System Error Enable */ - cfg01.s.fbbe = 1; /* Fast Back to Back Transaction Enable */ - - octeon_npi_write32(CVMX_NPI_PCI_CFG01, cfg01.u32); - -#ifdef USE_OCTEON_INTERNAL_ARBITER - /* - * When OCTEON is a PCI host, most systems will use OCTEON's - * internal arbiter, so must enable it before any PCI/PCI-X - * traffic can occur. - */ - { - union cvmx_npi_pci_int_arb_cfg pci_int_arb_cfg; - - pci_int_arb_cfg.u64 = 0; - pci_int_arb_cfg.s.en = 1; /* Internal arbiter enable */ - cvmx_write_csr(CVMX_NPI_PCI_INT_ARB_CFG, pci_int_arb_cfg.u64); - } -#endif /* USE_OCTEON_INTERNAL_ARBITER */ - - /* - * Preferrably written to 1 to set MLTD. [RDSATI,TRTAE, - * TWTAE,TMAE,DPPMR -> must be zero. TILT -> must not be set to - * 1..7. - */ - cfg16.u32 = 0; - cfg16.s.mltd = 1; /* Master Latency Timer Disable */ - octeon_npi_write32(CVMX_NPI_PCI_CFG16, cfg16.u32); - - /* - * Should be written to 0x4ff00. MTTV -> must be zero. - * FLUSH -> must be 1. MRV -> should be 0xFF. - */ - cfg22.u32 = 0; - /* Master Retry Value [1..255] and 0=infinite */ - cfg22.s.mrv = 0xff; - /* - * AM_DO_FLUSH_I control NOTE: This bit MUST BE ONE for proper - * N3K operation. - */ - cfg22.s.flush = 1; - octeon_npi_write32(CVMX_NPI_PCI_CFG22, cfg22.u32); - - /* - * MOST Indicates the maximum number of outstanding splits (in -1 - * notation) when OCTEON is in PCI-X mode. PCI-X performance is - * affected by the MOST selection. Should generally be written - * with one of 0x3be807, 0x2be807, 0x1be807, or 0x0be807, - * depending on the desired MOST of 3, 2, 1, or 0, respectively. - */ - cfg56.u32 = 0; - cfg56.s.pxcid = 7; /* RO - PCI-X Capability ID */ - cfg56.s.ncp = 0xe8; /* RO - Next Capability Pointer */ - cfg56.s.dpere = 1; /* Data Parity Error Recovery Enable */ - cfg56.s.roe = 1; /* Relaxed Ordering Enable */ - cfg56.s.mmbc = 1; /* Maximum Memory Byte Count - [0=512B,1=1024B,2=2048B,3=4096B] */ - cfg56.s.most = 3; /* Maximum outstanding Split transactions [0=1 - .. 7=32] */ - - octeon_npi_write32(CVMX_NPI_PCI_CFG56, cfg56.u32); - - /* - * Affects PCI performance when OCTEON services reads to its - * BAR1/BAR2. Refer to Section 10.6.1. The recommended values are - * 0x22, 0x33, and 0x33 for PCI_READ_CMD_6, PCI_READ_CMD_C, and - * PCI_READ_CMD_E, respectively. Unfortunately due to errata DDR-700, - * these values need to be changed so they won't possibly prefetch off - * of the end of memory if PCI is DMAing a buffer at the end of - * memory. Note that these values differ from their reset values. - */ - octeon_npi_write32(CVMX_NPI_PCI_READ_CMD_6, 0x21); - octeon_npi_write32(CVMX_NPI_PCI_READ_CMD_C, 0x31); - octeon_npi_write32(CVMX_NPI_PCI_READ_CMD_E, 0x31); -} - - -/** - * Initialize the Octeon PCI controller - * - * Returns - */ -static int __init octeon_pci_setup(void) -{ - union cvmx_npi_mem_access_subidx mem_access; - int index; - - /* Only these chips have PCI */ - if (octeon_has_feature(OCTEON_FEATURE_PCIE)) - return 0; - - /* Point pcibios_map_irq() to the PCI version of it */ - octeon_pcibios_map_irq = octeon_pci_pcibios_map_irq; - - /* Only use the big bars on chips that support it */ - if (OCTEON_IS_MODEL(OCTEON_CN31XX) || - OCTEON_IS_MODEL(OCTEON_CN38XX_PASS2) || - OCTEON_IS_MODEL(OCTEON_CN38XX_PASS1)) - octeon_dma_bar_type = OCTEON_DMA_BAR_TYPE_SMALL; - else - octeon_dma_bar_type = OCTEON_DMA_BAR_TYPE_BIG; - - /* PCI I/O and PCI MEM values */ - set_io_port_base(OCTEON_PCI_IOSPACE_BASE); - ioport_resource.start = 0; - ioport_resource.end = OCTEON_PCI_IOSPACE_SIZE - 1; - if (!octeon_is_pci_host()) { - pr_notice("Not in host mode, PCI Controller not initialized\n"); - return 0; - } - - pr_notice("%s Octeon big bar support\n", - (octeon_dma_bar_type == - OCTEON_DMA_BAR_TYPE_BIG) ? "Enabling" : "Disabling"); - - octeon_pci_initialize(); - - mem_access.u64 = 0; - mem_access.s.esr = 1; /* Endian-Swap on read. */ - mem_access.s.esw = 1; /* Endian-Swap on write. */ - mem_access.s.nsr = 0; /* No-Snoop on read. */ - mem_access.s.nsw = 0; /* No-Snoop on write. */ - mem_access.s.ror = 0; /* Relax Read on read. */ - mem_access.s.row = 0; /* Relax Order on write. */ - mem_access.s.ba = 0; /* PCI Address bits [63:36]. */ - cvmx_write_csr(CVMX_NPI_MEM_ACCESS_SUBID3, mem_access.u64); - - /* - * Remap the Octeon BAR 2 above all 32 bit devices - * (0x8000000000ul). This is done here so it is remapped - * before the readl()'s below. We don't want BAR2 overlapping - * with BAR0/BAR1 during these reads. - */ - octeon_npi_write32(CVMX_NPI_PCI_CFG08, 0); - octeon_npi_write32(CVMX_NPI_PCI_CFG09, 0x80); - - /* Disable the BAR1 movable mappings */ - for (index = 0; index < 32; index++) - octeon_npi_write32(CVMX_NPI_PCI_BAR1_INDEXX(index), 0); - - if (octeon_dma_bar_type == OCTEON_DMA_BAR_TYPE_BIG) { - /* Remap the Octeon BAR 0 to 0-2GB */ - octeon_npi_write32(CVMX_NPI_PCI_CFG04, 0); - octeon_npi_write32(CVMX_NPI_PCI_CFG05, 0); - - /* - * Remap the Octeon BAR 1 to map 2GB-4GB (minus the - * BAR 1 hole). - */ - octeon_npi_write32(CVMX_NPI_PCI_CFG06, 2ul << 30); - octeon_npi_write32(CVMX_NPI_PCI_CFG07, 0); - - /* Devices go after BAR1 */ - octeon_pci_mem_resource.start = - OCTEON_PCI_MEMSPACE_OFFSET + (4ul << 30) - - (OCTEON_PCI_BAR1_HOLE_SIZE << 20); - octeon_pci_mem_resource.end = - octeon_pci_mem_resource.start + (1ul << 30); - } else { - /* Remap the Octeon BAR 0 to map 128MB-(128MB+4KB) */ - octeon_npi_write32(CVMX_NPI_PCI_CFG04, 128ul << 20); - octeon_npi_write32(CVMX_NPI_PCI_CFG05, 0); - - /* Remap the Octeon BAR 1 to map 0-128MB */ - octeon_npi_write32(CVMX_NPI_PCI_CFG06, 0); - octeon_npi_write32(CVMX_NPI_PCI_CFG07, 0); - - /* Devices go after BAR0 */ - octeon_pci_mem_resource.start = - OCTEON_PCI_MEMSPACE_OFFSET + (128ul << 20) + - (4ul << 10); - octeon_pci_mem_resource.end = - octeon_pci_mem_resource.start + (1ul << 30); - } - - register_pci_controller(&octeon_pci_controller); - - /* - * Clear any errors that might be pending from before the bus - * was setup properly. - */ - cvmx_write_csr(CVMX_NPI_PCI_INT_SUM2, -1); - return 0; -} - -arch_initcall(octeon_pci_setup); diff --git a/arch/mips/cavium-octeon/pcie.c b/arch/mips/cavium-octeon/pcie.c deleted file mode 100644 index 49d1408..0000000 --- a/arch/mips/cavium-octeon/pcie.c +++ /dev/null @@ -1,1370 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2007, 2008 Cavium Networks - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/pci.h> -#include <linux/interrupt.h> -#include <linux/time.h> -#include <linux/delay.h> - -#include <asm/octeon/octeon.h> -#include <asm/octeon/cvmx-npei-defs.h> -#include <asm/octeon/cvmx-pciercx-defs.h> -#include <asm/octeon/cvmx-pescx-defs.h> -#include <asm/octeon/cvmx-pexp-defs.h> -#include <asm/octeon/cvmx-helper-errata.h> - -#include "pci-common.h" - -union cvmx_pcie_address { - uint64_t u64; - struct { - uint64_t upper:2; /* Normally 2 for XKPHYS */ - uint64_t reserved_49_61:13; /* Must be zero */ - uint64_t io:1; /* 1 for IO space access */ - uint64_t did:5; /* PCIe DID = 3 */ - uint64_t subdid:3; /* PCIe SubDID = 1 */ - uint64_t reserved_36_39:4; /* Must be zero */ - uint64_t es:2; /* Endian swap = 1 */ - uint64_t port:2; /* PCIe port 0,1 */ - uint64_t reserved_29_31:3; /* Must be zero */ - /* - * Selects the type of the configuration request (0 = type 0, - * 1 = type 1). - */ - uint64_t ty:1; - /* Target bus number sent in the ID in the request. */ - uint64_t bus:8; - /* - * Target device number sent in the ID in the - * request. Note that Dev must be zero for type 0 - * configuration requests. - */ - uint64_t dev:5; - /* Target function number sent in the ID in the request. */ - uint64_t func:3; - /* - * Selects a register in the configuration space of - * the target. - */ - uint64_t reg:12; - } config; - struct { - uint64_t upper:2; /* Normally 2 for XKPHYS */ - uint64_t reserved_49_61:13; /* Must be zero */ - uint64_t io:1; /* 1 for IO space access */ - uint64_t did:5; /* PCIe DID = 3 */ - uint64_t subdid:3; /* PCIe SubDID = 2 */ - uint64_t reserved_36_39:4; /* Must be zero */ - uint64_t es:2; /* Endian swap = 1 */ - uint64_t port:2; /* PCIe port 0,1 */ - uint64_t address:32; /* PCIe IO address */ - } io; - struct { - uint64_t upper:2; /* Normally 2 for XKPHYS */ - uint64_t reserved_49_61:13; /* Must be zero */ - uint64_t io:1; /* 1 for IO space access */ - uint64_t did:5; /* PCIe DID = 3 */ - uint64_t subdid:3; /* PCIe SubDID = 3-6 */ - uint64_t reserved_36_39:4; /* Must be zero */ - uint64_t address:36; /* PCIe Mem address */ - } mem; -}; - -/** - * Return the Core virtual base address for PCIe IO access. IOs are - * read/written as an offset from this address. - * - * @pcie_port: PCIe port the IO is for - * - * Returns 64bit Octeon IO base address for read/write - */ -static inline uint64_t cvmx_pcie_get_io_base_address(int pcie_port) -{ - union cvmx_pcie_address pcie_addr; - pcie_addr.u64 = 0; - pcie_addr.io.upper = 0; - pcie_addr.io.io = 1; - pcie_addr.io.did = 3; - pcie_addr.io.subdid = 2; - pcie_addr.io.es = 1; - pcie_addr.io.port = pcie_port; - return pcie_addr.u64; -} - -/** - * Size of the IO address region returned at address - * cvmx_pcie_get_io_base_address() - * - * @pcie_port: PCIe port the IO is for - * - * Returns Size of the IO window - */ -static inline uint64_t cvmx_pcie_get_io_size(int pcie_port) -{ - return 1ull << 32; -} - -/** - * Return the Core virtual base address for PCIe MEM access. Memory is - * read/written as an offset from this address. - * - * @pcie_port: PCIe port the IO is for - * - * Returns 64bit Octeon IO base address for read/write - */ -static inline uint64_t cvmx_pcie_get_mem_base_address(int pcie_port) -{ - union cvmx_pcie_address pcie_addr; - pcie_addr.u64 = 0; - pcie_addr.mem.upper = 0; - pcie_addr.mem.io = 1; - pcie_addr.mem.did = 3; - pcie_addr.mem.subdid = 3 + pcie_port; - return pcie_addr.u64; -} - -/** - * Size of the Mem address region returned at address - * cvmx_pcie_get_mem_base_address() - * - * @pcie_port: PCIe port the IO is for - * - * Returns Size of the Mem window - */ -static inline uint64_t cvmx_pcie_get_mem_size(int pcie_port) -{ - return 1ull << 36; -} - -/** - * Read a PCIe config space register indirectly. This is used for - * registers of the form PCIEEP_CFG??? and PCIERC?_CFG???. - * - * @pcie_port: PCIe port to read from - * @cfg_offset: Address to read - * - * Returns Value read - */ -static uint32_t cvmx_pcie_cfgx_read(int pcie_port, uint32_t cfg_offset) -{ - union cvmx_pescx_cfg_rd pescx_cfg_rd; - pescx_cfg_rd.u64 = 0; - pescx_cfg_rd.s.addr = cfg_offset; - cvmx_write_csr(CVMX_PESCX_CFG_RD(pcie_port), pescx_cfg_rd.u64); - pescx_cfg_rd.u64 = cvmx_read_csr(CVMX_PESCX_CFG_RD(pcie_port)); - return pescx_cfg_rd.s.data; -} - -/** - * Write a PCIe config space register indirectly. This is used for - * registers of the form PCIEEP_CFG??? and PCIERC?_CFG???. - * - * @pcie_port: PCIe port to write to - * @cfg_offset: Address to write - * @val: Value to write - */ -static void cvmx_pcie_cfgx_write(int pcie_port, uint32_t cfg_offset, - uint32_t val) -{ - union cvmx_pescx_cfg_wr pescx_cfg_wr; - pescx_cfg_wr.u64 = 0; - pescx_cfg_wr.s.addr = cfg_offset; - pescx_cfg_wr.s.data = val; - cvmx_write_csr(CVMX_PESCX_CFG_WR(pcie_port), pescx_cfg_wr.u64); -} - -/** - * Build a PCIe config space request address for a device - * - * @pcie_port: PCIe port to access - * @bus: Sub bus - * @dev: Device ID - * @fn: Device sub function - * @reg: Register to access - * - * Returns 64bit Octeon IO address - */ -static inline uint64_t __cvmx_pcie_build_config_addr(int pcie_port, int bus, - int dev, int fn, int reg) -{ - union cvmx_pcie_address pcie_addr; - union cvmx_pciercx_cfg006 pciercx_cfg006; - - pciercx_cfg006.u32 = - cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG006(pcie_port)); - if ((bus <= pciercx_cfg006.s.pbnum) && (dev != 0)) - return 0; - - pcie_addr.u64 = 0; - pcie_addr.config.upper = 2; - pcie_addr.config.io = 1; - pcie_addr.config.did = 3; - pcie_addr.config.subdid = 1; - pcie_addr.config.es = 1; - pcie_addr.config.port = pcie_port; - pcie_addr.config.ty = (bus > pciercx_cfg006.s.pbnum); - pcie_addr.config.bus = bus; - pcie_addr.config.dev = dev; - pcie_addr.config.func = fn; - pcie_addr.config.reg = reg; - return pcie_addr.u64; -} - -/** - * Read 8bits from a Device's config space - * - * @pcie_port: PCIe port the device is on - * @bus: Sub bus - * @dev: Device ID - * @fn: Device sub function - * @reg: Register to access - * - * Returns Result of the read - */ -static uint8_t cvmx_pcie_config_read8(int pcie_port, int bus, int dev, - int fn, int reg) -{ - uint64_t address = - __cvmx_pcie_build_config_addr(pcie_port, bus, dev, fn, reg); - if (address) - return cvmx_read64_uint8(address); - else - return 0xff; -} - -/** - * Read 16bits from a Device's config space - * - * @pcie_port: PCIe port the device is on - * @bus: Sub bus - * @dev: Device ID - * @fn: Device sub function - * @reg: Register to access - * - * Returns Result of the read - */ -static uint16_t cvmx_pcie_config_read16(int pcie_port, int bus, int dev, - int fn, int reg) -{ - uint64_t address = - __cvmx_pcie_build_config_addr(pcie_port, bus, dev, fn, reg); - if (address) - return le16_to_cpu(cvmx_read64_uint16(address)); - else - return 0xffff; -} - -/** - * Read 32bits from a Device's config space - * - * @pcie_port: PCIe port the device is on - * @bus: Sub bus - * @dev: Device ID - * @fn: Device sub function - * @reg: Register to access - * - * Returns Result of the read - */ -static uint32_t cvmx_pcie_config_read32(int pcie_port, int bus, int dev, - int fn, int reg) -{ - uint64_t address = - __cvmx_pcie_build_config_addr(pcie_port, bus, dev, fn, reg); - if (address) - return le32_to_cpu(cvmx_read64_uint32(address)); - else - return 0xffffffff; -} - -/** - * Write 8bits to a Device's config space - * - * @pcie_port: PCIe port the device is on - * @bus: Sub bus - * @dev: Device ID - * @fn: Device sub function - * @reg: Register to access - * @val: Value to write - */ -static void cvmx_pcie_config_write8(int pcie_port, int bus, int dev, int fn, - int reg, uint8_t val) -{ - uint64_t address = - __cvmx_pcie_build_config_addr(pcie_port, bus, dev, fn, reg); - if (address) - cvmx_write64_uint8(address, val); -} - -/** - * Write 16bits to a Device's config space - * - * @pcie_port: PCIe port the device is on - * @bus: Sub bus - * @dev: Device ID - * @fn: Device sub function - * @reg: Register to access - * @val: Value to write - */ -static void cvmx_pcie_config_write16(int pcie_port, int bus, int dev, int fn, - int reg, uint16_t val) -{ - uint64_t address = - __cvmx_pcie_build_config_addr(pcie_port, bus, dev, fn, reg); - if (address) - cvmx_write64_uint16(address, cpu_to_le16(val)); -} - -/** - * Write 32bits to a Device's config space - * - * @pcie_port: PCIe port the device is on - * @bus: Sub bus - * @dev: Device ID - * @fn: Device sub function - * @reg: Register to access - * @val: Value to write - */ -static void cvmx_pcie_config_write32(int pcie_port, int bus, int dev, int fn, - int reg, uint32_t val) -{ - uint64_t address = - __cvmx_pcie_build_config_addr(pcie_port, bus, dev, fn, reg); - if (address) - cvmx_write64_uint32(address, cpu_to_le32(val)); -} - -/** - * Initialize the RC config space CSRs - * - * @pcie_port: PCIe port to initialize - */ -static void __cvmx_pcie_rc_initialize_config_space(int pcie_port) -{ - union cvmx_pciercx_cfg030 pciercx_cfg030; - union cvmx_npei_ctl_status2 npei_ctl_status2; - union cvmx_pciercx_cfg070 pciercx_cfg070; - union cvmx_pciercx_cfg001 pciercx_cfg001; - union cvmx_pciercx_cfg032 pciercx_cfg032; - union cvmx_pciercx_cfg006 pciercx_cfg006; - union cvmx_pciercx_cfg008 pciercx_cfg008; - union cvmx_pciercx_cfg009 pciercx_cfg009; - union cvmx_pciercx_cfg010 pciercx_cfg010; - union cvmx_pciercx_cfg011 pciercx_cfg011; - union cvmx_pciercx_cfg035 pciercx_cfg035; - union cvmx_pciercx_cfg075 pciercx_cfg075; - union cvmx_pciercx_cfg034 pciercx_cfg034; - - /* Max Payload Size (PCIE*_CFG030[MPS]) */ - /* Max Read Request Size (PCIE*_CFG030[MRRS]) */ - /* Relaxed-order, no-snoop enables (PCIE*_CFG030[RO_EN,NS_EN] */ - /* Error Message Enables (PCIE*_CFG030[CE_EN,NFE_EN,FE_EN,UR_EN]) */ - pciercx_cfg030.u32 = - cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG030(pcie_port)); - /* - * Max payload size = 128 bytes for best Octeon DMA - * performance. - */ - pciercx_cfg030.s.mps = 0; - /* - * Max read request size = 128 bytes for best Octeon DMA - * performance. - */ - pciercx_cfg030.s.mrrs = 0; - /* Enable relaxed ordering. */ - pciercx_cfg030.s.ro_en = 1; - /* Enable no snoop. */ - pciercx_cfg030.s.ns_en = 1; - /* Correctable error reporting enable. */ - pciercx_cfg030.s.ce_en = 1; - /* Non-fatal error reporting enable. */ - pciercx_cfg030.s.nfe_en = 1; - /* Fatal error reporting enable. */ - pciercx_cfg030.s.fe_en = 1; - /* Unsupported request reporting enable. */ - pciercx_cfg030.s.ur_en = 1; - cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG030(pcie_port), - pciercx_cfg030.u32); - - /* - * Max Payload Size (NPEI_CTL_STATUS2[MPS]) must match - * PCIE*_CFG030[MPS] - * - * Max Read Request Size (NPEI_CTL_STATUS2[MRRS]) must not - * exceed PCIE*_CFG030[MRRS]. - */ - npei_ctl_status2.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_CTL_STATUS2); - /* Max payload size = 128 bytes for best Octeon DMA performance */ - npei_ctl_status2.s.mps = 0; - /* Max read request size = 128 bytes for best Octeon DMA performance */ - npei_ctl_status2.s.mrrs = 0; - cvmx_write_csr(CVMX_PEXP_NPEI_CTL_STATUS2, npei_ctl_status2.u64); - - /* ECRC Generation (PCIE*_CFG070[GE,CE]) */ - pciercx_cfg070.u32 = - cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG070(pcie_port)); - pciercx_cfg070.s.ge = 1; /* ECRC generation enable. */ - pciercx_cfg070.s.ce = 1; /* ECRC check enable. */ - cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG070(pcie_port), - pciercx_cfg070.u32); - - /* - * Access Enables (PCIE*_CFG001[MSAE,ME]) ME and MSAE should - * always be set. - * - * Interrupt Disable (PCIE*_CFG001[I_DIS]) System Error - * Message Enable (PCIE*_CFG001[SEE]) - */ - pciercx_cfg001.u32 = - cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG001(pcie_port)); - pciercx_cfg001.s.msae = 1; /* Memory space enable. */ - pciercx_cfg001.s.me = 1; /* Bus master enable. */ - pciercx_cfg001.s.i_dis = 1; /* INTx assertion disable. */ - pciercx_cfg001.s.see = 1; /* SERR# enable */ - cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG001(pcie_port), - pciercx_cfg001.u32); - - /* Advanced Error Recovery Message Enables */ - /* (PCIE*_CFG066,PCIE*_CFG067,PCIE*_CFG069) */ - cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG066(pcie_port), 0); - /* Use CVMX_PCIERCX_CFG067 hardware default */ - cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG069(pcie_port), 0); - - /* Active State Power Management (PCIE*_CFG032[ASLPC]) */ - pciercx_cfg032.u32 = - cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG032(pcie_port)); - pciercx_cfg032.s.aslpc = 0; /* Active state Link PM control. */ - cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG032(pcie_port), - pciercx_cfg032.u32); - - /* Entrance Latencies (PCIE*_CFG451[L0EL,L1EL]) */ - - /* - * Link Width Mode (PCIERCn_CFG452[LME]) - Set during - * cvmx_pcie_rc_initialize_link() - * - * Primary Bus Number (PCIERCn_CFG006[PBNUM]) - * - * We set the primary bus number to 1 so IDT bridges are - * happy. They don't like zero. - */ - pciercx_cfg006.u32 = 0; - pciercx_cfg006.s.pbnum = 1; - pciercx_cfg006.s.sbnum = 1; - pciercx_cfg006.s.subbnum = 1; - cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG006(pcie_port), - pciercx_cfg006.u32); - - /* - * Memory-mapped I/O BAR (PCIERCn_CFG008) - * Most applications should disable the memory-mapped I/O BAR by - * setting PCIERCn_CFG008[ML_ADDR] < PCIERCn_CFG008[MB_ADDR] - */ - pciercx_cfg008.u32 = 0; - pciercx_cfg008.s.mb_addr = 0x100; - pciercx_cfg008.s.ml_addr = 0; - cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG008(pcie_port), - pciercx_cfg008.u32); - - /* - * Prefetchable BAR (PCIERCn_CFG009,PCIERCn_CFG010,PCIERCn_CFG011) - * Most applications should disable the prefetchable BAR by setting - * PCIERCn_CFG011[UMEM_LIMIT],PCIERCn_CFG009[LMEM_LIMIT] < - * PCIERCn_CFG010[UMEM_BASE],PCIERCn_CFG009[LMEM_BASE] - */ - pciercx_cfg009.u32 = - cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG009(pcie_port)); - pciercx_cfg010.u32 = - cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG010(pcie_port)); - pciercx_cfg011.u32 = - cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG011(pcie_port)); - pciercx_cfg009.s.lmem_base = 0x100; - pciercx_cfg009.s.lmem_limit = 0; - pciercx_cfg010.s.umem_base = 0x100; - pciercx_cfg011.s.umem_limit = 0; - cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG009(pcie_port), - pciercx_cfg009.u32); - cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG010(pcie_port), - pciercx_cfg010.u32); - cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG011(pcie_port), - pciercx_cfg011.u32); - - /* - * System Error Interrupt Enables (PCIERCn_CFG035[SECEE,SEFEE,SENFEE]) - * PME Interrupt Enables (PCIERCn_CFG035[PMEIE]) - */ - pciercx_cfg035.u32 = - cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG035(pcie_port)); - /* System error on correctable error enable. */ - pciercx_cfg035.s.secee = 1; - /* System error on fatal error enable. */ - pciercx_cfg035.s.sefee = 1; - /* System error on non-fatal error enable. */ - pciercx_cfg035.s.senfee = 1; - /* PME interrupt enable. */ - pciercx_cfg035.s.pmeie = 1; - cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG035(pcie_port), - pciercx_cfg035.u32); - - /* - * Advanced Error Recovery Interrupt Enables - * (PCIERCn_CFG075[CERE,NFERE,FERE]) - */ - pciercx_cfg075.u32 = - cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG075(pcie_port)); - /* Correctable error reporting enable. */ - pciercx_cfg075.s.cere = 1; - /* Non-fatal error reporting enable. */ - pciercx_cfg075.s.nfere = 1; - /* Fatal error reporting enable. */ - pciercx_cfg075.s.fere = 1; - cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG075(pcie_port), - pciercx_cfg075.u32); - - /* HP Interrupt Enables (PCIERCn_CFG034[HPINT_EN], - * PCIERCn_CFG034[DLLS_EN,CCINT_EN]) - */ - pciercx_cfg034.u32 = - cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG034(pcie_port)); - /* Hot-plug interrupt enable. */ - pciercx_cfg034.s.hpint_en = 1; - /* Data Link Layer state changed enable */ - pciercx_cfg034.s.dlls_en = 1; - /* Command completed interrupt enable. */ - pciercx_cfg034.s.ccint_en = 1; - cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG034(pcie_port), - pciercx_cfg034.u32); -} - -/** - * Initialize a host mode PCIe link. This function takes a PCIe - * port from reset to a link up state. Software can then begin - * configuring the rest of the link. - * - * @pcie_port: PCIe port to initialize - * - * Returns Zero on success - */ -static int __cvmx_pcie_rc_initialize_link(int pcie_port) -{ - uint64_t start_cycle; - union cvmx_pescx_ctl_status pescx_ctl_status; - union cvmx_pciercx_cfg452 pciercx_cfg452; - union cvmx_pciercx_cfg032 pciercx_cfg032; - union cvmx_pciercx_cfg448 pciercx_cfg448; - - /* Set the lane width */ - pciercx_cfg452.u32 = - cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG452(pcie_port)); - pescx_ctl_status.u64 = cvmx_read_csr(CVMX_PESCX_CTL_STATUS(pcie_port)); - if (pescx_ctl_status.s.qlm_cfg == 0) { - /* We're in 8 lane (56XX) or 4 lane (54XX) mode */ - pciercx_cfg452.s.lme = 0xf; - } else { - /* We're in 4 lane (56XX) or 2 lane (52XX) mode */ - pciercx_cfg452.s.lme = 0x7; - } - cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG452(pcie_port), - pciercx_cfg452.u32); - - /* - * CN52XX pass 1.x has an errata where length mismatches on UR - * responses can cause bus errors on 64bit memory - * reads. Turning off length error checking fixes this. - */ - if (OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_X)) { - union cvmx_pciercx_cfg455 pciercx_cfg455; - pciercx_cfg455.u32 = - cvmx_pcie_cfgx_read(pcie_port, - CVMX_PCIERCX_CFG455(pcie_port)); - pciercx_cfg455.s.m_cpl_len_err = 1; - cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG455(pcie_port), - pciercx_cfg455.u32); - } - - /* Lane swap needs to be manually enabled for CN52XX */ - if (OCTEON_IS_MODEL(OCTEON_CN52XX) && (pcie_port == 1)) { - pescx_ctl_status.s.lane_swp = 1; - cvmx_write_csr(CVMX_PESCX_CTL_STATUS(pcie_port), - pescx_ctl_status.u64); - } - - /* Bring up the link */ - pescx_ctl_status.u64 = cvmx_read_csr(CVMX_PESCX_CTL_STATUS(pcie_port)); - pescx_ctl_status.s.lnk_enb = 1; - cvmx_write_csr(CVMX_PESCX_CTL_STATUS(pcie_port), pescx_ctl_status.u64); - - /* - * CN52XX pass 1.0: Due to a bug in 2nd order CDR, it needs to - * be disabled. - */ - if (OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_0)) - __cvmx_helper_errata_qlm_disable_2nd_order_cdr(0); - - /* Wait for the link to come up */ - cvmx_dprintf("PCIe: Waiting for port %d link\n", pcie_port); - start_cycle = cvmx_get_cycle(); - do { - if (cvmx_get_cycle() - start_cycle > - 2 * cvmx_sysinfo_get()->cpu_clock_hz) { - cvmx_dprintf("PCIe: Port %d link timeout\n", - pcie_port); - return -1; - } - cvmx_wait(10000); - pciercx_cfg032.u32 = - cvmx_pcie_cfgx_read(pcie_port, - CVMX_PCIERCX_CFG032(pcie_port)); - } while (pciercx_cfg032.s.dlla == 0); - - /* Display the link status */ - cvmx_dprintf("PCIe: Port %d link active, %d lanes\n", pcie_port, - pciercx_cfg032.s.nlw); - - /* - * Update the Replay Time Limit. Empirically, some PCIe - * devices take a little longer to respond than expected under - * load. As a workaround for this we configure the Replay Time - * Limit to the value expected for a 512 byte MPS instead of - * our actual 256 byte MPS. The numbers below are directly - * from the PCIe spec table 3-4. - */ - pciercx_cfg448.u32 = - cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG448(pcie_port)); - switch (pciercx_cfg032.s.nlw) { - case 1: /* 1 lane */ - pciercx_cfg448.s.rtl = 1677; - break; - case 2: /* 2 lanes */ - pciercx_cfg448.s.rtl = 867; - break; - case 4: /* 4 lanes */ - pciercx_cfg448.s.rtl = 462; - break; - case 8: /* 8 lanes */ - pciercx_cfg448.s.rtl = 258; - break; - } - cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG448(pcie_port), - pciercx_cfg448.u32); - - return 0; -} - -/** - * Initialize a PCIe port for use in host(RC) mode. It doesn't - * enumerate the bus. - * - * @pcie_port: PCIe port to initialize - * - * Returns Zero on success - */ -static int cvmx_pcie_rc_initialize(int pcie_port) -{ - int i; - union cvmx_ciu_soft_prst ciu_soft_prst; - union cvmx_pescx_bist_status pescx_bist_status; - union cvmx_pescx_bist_status2 pescx_bist_status2; - union cvmx_npei_ctl_status npei_ctl_status; - union cvmx_npei_mem_access_ctl npei_mem_access_ctl; - union cvmx_npei_mem_access_subidx mem_access_subid; - union cvmx_npei_dbg_data npei_dbg_data; - union cvmx_pescx_ctl_status2 pescx_ctl_status2; - - /* - * Make sure we aren't trying to setup a target mode interface - * in host mode. - */ - npei_ctl_status.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_CTL_STATUS); - if ((pcie_port == 0) && !npei_ctl_status.s.host_mode) { - cvmx_dprintf("PCIe: ERROR: cvmx_pcie_rc_initialize() called " - "on port0, but port0 is not in host mode\n"); - return -1; - } - - /* - * Make sure a CN52XX isn't trying to bring up port 1 when it - * is disabled. - */ - if (OCTEON_IS_MODEL(OCTEON_CN52XX)) { - npei_dbg_data.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_DBG_DATA); - if ((pcie_port == 1) && npei_dbg_data.cn52xx.qlm0_link_width) { - cvmx_dprintf("PCIe: ERROR: cvmx_pcie_rc_initialize() " - "called on port1, but port1 is " - "disabled\n"); - return -1; - } - } - - /* - * PCIe switch arbitration mode. '0' == fixed priority NPEI, - * PCIe0, then PCIe1. '1' == round robin. - */ - npei_ctl_status.s.arb = 1; - /* Allow up to 0x20 config retries */ - npei_ctl_status.s.cfg_rtry = 0x20; - /* - * CN52XX pass1.x has an errata where P0_NTAGS and P1_NTAGS - * don't reset. - */ - if (OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_X)) { - npei_ctl_status.s.p0_ntags = 0x20; - npei_ctl_status.s.p1_ntags = 0x20; - } - cvmx_write_csr(CVMX_PEXP_NPEI_CTL_STATUS, npei_ctl_status.u64); - - /* Bring the PCIe out of reset */ - if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_EBH5200) { - /* - * The EBH5200 board swapped the PCIe reset lines on - * the board. As a workaround for this bug, we bring - * both PCIe ports out of reset at the same time - * instead of on separate calls. So for port 0, we - * bring both out of reset and do nothing on port 1. - */ - if (pcie_port == 0) { - ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST); - /* - * After a chip reset the PCIe will also be in - * reset. If it isn't, most likely someone is - * trying to init it again without a proper - * PCIe reset. - */ - if (ciu_soft_prst.s.soft_prst == 0) { - /* Reset the ports */ - ciu_soft_prst.s.soft_prst = 1; - cvmx_write_csr(CVMX_CIU_SOFT_PRST, - ciu_soft_prst.u64); - ciu_soft_prst.u64 = - cvmx_read_csr(CVMX_CIU_SOFT_PRST1); - ciu_soft_prst.s.soft_prst = 1; - cvmx_write_csr(CVMX_CIU_SOFT_PRST1, - ciu_soft_prst.u64); - /* Wait until pcie resets the ports. */ - udelay(2000); - } - ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST1); - ciu_soft_prst.s.soft_prst = 0; - cvmx_write_csr(CVMX_CIU_SOFT_PRST1, ciu_soft_prst.u64); - ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST); - ciu_soft_prst.s.soft_prst = 0; - cvmx_write_csr(CVMX_CIU_SOFT_PRST, ciu_soft_prst.u64); - } - } else { - /* - * The normal case: The PCIe ports are completely - * separate and can be brought out of reset - * independently. - */ - if (pcie_port) - ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST1); - else - ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST); - /* - * After a chip reset the PCIe will also be in - * reset. If it isn't, most likely someone is trying - * to init it again without a proper PCIe reset. - */ - if (ciu_soft_prst.s.soft_prst == 0) { - /* Reset the port */ - ciu_soft_prst.s.soft_prst = 1; - if (pcie_port) - cvmx_write_csr(CVMX_CIU_SOFT_PRST1, - ciu_soft_prst.u64); - else - cvmx_write_csr(CVMX_CIU_SOFT_PRST, - ciu_soft_prst.u64); - /* Wait until pcie resets the ports. */ - udelay(2000); - } - if (pcie_port) { - ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST1); - ciu_soft_prst.s.soft_prst = 0; - cvmx_write_csr(CVMX_CIU_SOFT_PRST1, ciu_soft_prst.u64); - } else { - ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST); - ciu_soft_prst.s.soft_prst = 0; - cvmx_write_csr(CVMX_CIU_SOFT_PRST, ciu_soft_prst.u64); - } - } - - /* - * Wait for PCIe reset to complete. Due to errata PCIE-700, we - * don't poll PESCX_CTL_STATUS2[PCIERST], but simply wait a - * fixed number of cycles. - */ - cvmx_wait(400000); - - /* PESCX_BIST_STATUS2[PCLK_RUN] was missing on pass 1 of CN56XX and - CN52XX, so we only probe it on newer chips */ - if (!OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_X) - && !OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_X)) { - /* Clear PCLK_RUN so we can check if the clock is running */ - pescx_ctl_status2.u64 = - cvmx_read_csr(CVMX_PESCX_CTL_STATUS2(pcie_port)); - pescx_ctl_status2.s.pclk_run = 1; - cvmx_write_csr(CVMX_PESCX_CTL_STATUS2(pcie_port), - pescx_ctl_status2.u64); - /* - * Now that we cleared PCLK_RUN, wait for it to be set - * again telling us the clock is running. - */ - if (CVMX_WAIT_FOR_FIELD64(CVMX_PESCX_CTL_STATUS2(pcie_port), - union cvmx_pescx_ctl_status2, - pclk_run, ==, 1, 10000)) { - cvmx_dprintf("PCIe: Port %d isn't clocked, skipping.\n", - pcie_port); - return -1; - } - } - - /* - * Check and make sure PCIe came out of reset. If it doesn't - * the board probably hasn't wired the clocks up and the - * interface should be skipped. - */ - pescx_ctl_status2.u64 = - cvmx_read_csr(CVMX_PESCX_CTL_STATUS2(pcie_port)); - if (pescx_ctl_status2.s.pcierst) { - cvmx_dprintf("PCIe: Port %d stuck in reset, skipping.\n", - pcie_port); - return -1; - } - - /* - * Check BIST2 status. If any bits are set skip this interface. This - * is an attempt to catch PCIE-813 on pass 1 parts. - */ - pescx_bist_status2.u64 = - cvmx_read_csr(CVMX_PESCX_BIST_STATUS2(pcie_port)); - if (pescx_bist_status2.u64) { - cvmx_dprintf("PCIe: Port %d BIST2 failed. Most likely this " - "port isn't hooked up, skipping.\n", - pcie_port); - return -1; - } - - /* Check BIST status */ - pescx_bist_status.u64 = - cvmx_read_csr(CVMX_PESCX_BIST_STATUS(pcie_port)); - if (pescx_bist_status.u64) - cvmx_dprintf("PCIe: BIST FAILED for port %d (0x%016llx)\n", - pcie_port, CAST64(pescx_bist_status.u64)); - - /* Initialize the config space CSRs */ - __cvmx_pcie_rc_initialize_config_space(pcie_port); - - /* Bring the link up */ - if (__cvmx_pcie_rc_initialize_link(pcie_port)) { - cvmx_dprintf - ("PCIe: ERROR: cvmx_pcie_rc_initialize_link() failed\n"); - return -1; - } - - /* Store merge control (NPEI_MEM_ACCESS_CTL[TIMER,MAX_WORD]) */ - npei_mem_access_ctl.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_MEM_ACCESS_CTL); - /* Allow 16 words to combine */ - npei_mem_access_ctl.s.max_word = 0; - /* Wait up to 127 cycles for more data */ - npei_mem_access_ctl.s.timer = 127; - cvmx_write_csr(CVMX_PEXP_NPEI_MEM_ACCESS_CTL, npei_mem_access_ctl.u64); - - /* Setup Mem access SubDIDs */ - mem_access_subid.u64 = 0; - /* Port the request is sent to. */ - mem_access_subid.s.port = pcie_port; - /* Due to an errata on pass 1 chips, no merging is allowed. */ - mem_access_subid.s.nmerge = 1; - /* Endian-swap for Reads. */ - mem_access_subid.s.esr = 1; - /* Endian-swap for Writes. */ - mem_access_subid.s.esw = 1; - /* No Snoop for Reads. */ - mem_access_subid.s.nsr = 1; - /* No Snoop for Writes. */ - mem_access_subid.s.nsw = 1; - /* Disable Relaxed Ordering for Reads. */ - mem_access_subid.s.ror = 0; - /* Disable Relaxed Ordering for Writes. */ - mem_access_subid.s.row = 0; - /* PCIe Adddress Bits <63:34>. */ - mem_access_subid.s.ba = 0; - - /* - * Setup mem access 12-15 for port 0, 16-19 for port 1, - * supplying 36 bits of address space. - */ - for (i = 12 + pcie_port * 4; i < 16 + pcie_port * 4; i++) { - cvmx_write_csr(CVMX_PEXP_NPEI_MEM_ACCESS_SUBIDX(i), - mem_access_subid.u64); - /* Set each SUBID to extend the addressable range */ - mem_access_subid.s.ba += 1; - } - - /* - * Disable the peer to peer forwarding register. This must be - * setup by the OS after it enumerates the bus and assigns - * addresses to the PCIe busses. - */ - for (i = 0; i < 4; i++) { - cvmx_write_csr(CVMX_PESCX_P2P_BARX_START(i, pcie_port), -1); - cvmx_write_csr(CVMX_PESCX_P2P_BARX_END(i, pcie_port), -1); - } - - /* Set Octeon's BAR0 to decode 0-16KB. It overlaps with Bar2 */ - cvmx_write_csr(CVMX_PESCX_P2N_BAR0_START(pcie_port), 0); - - /* - * Disable Octeon's BAR1. It isn't needed in RC mode since - * BAR2 maps all of memory. BAR2 also maps 256MB-512MB into - * the 2nd 256MB of memory. - */ - cvmx_write_csr(CVMX_PESCX_P2N_BAR1_START(pcie_port), -1); - - /* - * Set Octeon's BAR2 to decode 0-2^39. Bar0 and Bar1 take - * precedence where they overlap. It also overlaps with the - * device addresses, so make sure the peer to peer forwarding - * is set right. - */ - cvmx_write_csr(CVMX_PESCX_P2N_BAR2_START(pcie_port), 0); - - /* - * Setup BAR2 attributes - * - * Relaxed Ordering (NPEI_CTL_PORTn[PTLP_RO,CTLP_RO, WAIT_COM]) - * - PTLP_RO,CTLP_RO should normally be set (except for debug). - * - WAIT_COM=0 will likely work for all applications. - * - * Load completion relaxed ordering (NPEI_CTL_PORTn[WAITL_COM]). - */ - if (pcie_port) { - union cvmx_npei_ctl_port1 npei_ctl_port; - npei_ctl_port.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_CTL_PORT1); - npei_ctl_port.s.bar2_enb = 1; - npei_ctl_port.s.bar2_esx = 1; - npei_ctl_port.s.bar2_cax = 0; - npei_ctl_port.s.ptlp_ro = 1; - npei_ctl_port.s.ctlp_ro = 1; - npei_ctl_port.s.wait_com = 0; - npei_ctl_port.s.waitl_com = 0; - cvmx_write_csr(CVMX_PEXP_NPEI_CTL_PORT1, npei_ctl_port.u64); - } else { - union cvmx_npei_ctl_port0 npei_ctl_port; - npei_ctl_port.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_CTL_PORT0); - npei_ctl_port.s.bar2_enb = 1; - npei_ctl_port.s.bar2_esx = 1; - npei_ctl_port.s.bar2_cax = 0; - npei_ctl_port.s.ptlp_ro = 1; - npei_ctl_port.s.ctlp_ro = 1; - npei_ctl_port.s.wait_com = 0; - npei_ctl_port.s.waitl_com = 0; - cvmx_write_csr(CVMX_PEXP_NPEI_CTL_PORT0, npei_ctl_port.u64); - } - return 0; -} - - -/* Above was cvmx-pcie.c, below original pcie.c */ - - -/** - * Map a PCI device to the appropriate interrupt line - * - * @param dev The Linux PCI device structure for the device to map - * @param slot The slot number for this device on __BUS 0__. Linux - * enumerates through all the bridges and figures out the - * slot on Bus 0 where this device eventually hooks to. - * @param pin The PCI interrupt pin read from the device, then swizzled - * as it goes through each bridge. - * @return Interrupt number for the device - */ -int __init octeon_pcie_pcibios_map_irq(const struct pci_dev *dev, - u8 slot, u8 pin) -{ - /* - * The EBH5600 board with the PCI to PCIe bridge mistakenly - * wires the first slot for both device id 2 and interrupt - * A. According to the PCI spec, device id 2 should be C. The - * following kludge attempts to fix this. - */ - if (strstr(octeon_board_type_string(), "EBH5600") && - dev->bus && dev->bus->parent) { - /* - * Iterate all the way up the device chain and find - * the root bus. - */ - while (dev->bus && dev->bus->parent) - dev = to_pci_dev(dev->bus->bridge); - /* If the root bus is number 0 and the PEX 8114 is the - * root, assume we are behind the miswired bus. We - * need to correct the swizzle level by two. Yuck. - */ - if ((dev->bus->number == 0) && - (dev->vendor == 0x10b5) && (dev->device == 0x8114)) { - /* - * The pin field is one based, not zero. We - * need to swizzle it by minus two. - */ - pin = ((pin - 3) & 3) + 1; - } - } - /* - * The -1 is because pin starts with one, not zero. It might - * be that this equation needs to include the slot number, but - * I don't have hardware to check that against. - */ - return pin - 1 + OCTEON_IRQ_PCI_INT0; -} - -/** - * Read a value from configuration space - * - * @param bus - * @param devfn - * @param reg - * @param size - * @param val - * @return - */ -static inline int octeon_pcie_read_config(int pcie_port, struct pci_bus *bus, - unsigned int devfn, int reg, int size, - u32 *val) -{ - union octeon_cvmemctl cvmmemctl; - union octeon_cvmemctl cvmmemctl_save; - int bus_number = bus->number; - - /* - * We need to force the bus number to be zero on the root - * bus. Linux numbers the 2nd root bus to start after all - * buses on root 0. - */ - if (bus->parent == NULL) - bus_number = 0; - - /* - * PCIe only has a single device connected to Octeon. It is - * always device ID 0. Don't bother doing reads for other - * device IDs on the first segment. - */ - if ((bus_number == 0) && (devfn >> 3 != 0)) - return PCIBIOS_FUNC_NOT_SUPPORTED; - - /* - * The following is a workaround for the CN57XX, CN56XX, - * CN55XX, and CN54XX errata with PCIe config reads from non - * existent devices. These chips will hang the PCIe link if a - * config read is performed that causes a UR response. - */ - if (OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1) || - OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_1)) { - /* - * For our EBH5600 board, port 0 has a bridge with two - * PCI-X slots. We need a new special checks to make - * sure we only probe valid stuff. The PCIe->PCI-X - * bridge only respondes to device ID 0, function - * 0-1 - */ - if ((bus_number == 0) && (devfn >= 2)) - return PCIBIOS_FUNC_NOT_SUPPORTED; - /* - * The PCI-X slots are device ID 2,3. Choose one of - * the below "if" blocks based on what is plugged into - * the board. - */ -#if 1 - /* Use this option if you aren't using either slot */ - if (bus_number == 1) - return PCIBIOS_FUNC_NOT_SUPPORTED; -#elif 0 - /* - * Use this option if you are using the first slot but - * not the second. - */ - if ((bus_number == 1) && (devfn >> 3 != 2)) - return PCIBIOS_FUNC_NOT_SUPPORTED; -#elif 0 - /* - * Use this option if you are using the second slot - * but not the first. - */ - if ((bus_number == 1) && (devfn >> 3 != 3)) - return PCIBIOS_FUNC_NOT_SUPPORTED; -#elif 0 - /* Use this opion if you are using both slots */ - if ((bus_number == 1) && - !((devfn == (2 << 3)) || (devfn == (3 << 3)))) - return PCIBIOS_FUNC_NOT_SUPPORTED; -#endif - - /* - * Shorten the DID timeout so bus errors for PCIe - * config reads from non existent devices happen - * faster. This allows us to continue booting even if - * the above "if" checks are wrong. Once one of these - * errors happens, the PCIe port is dead. - */ - cvmmemctl_save.u64 = __read_64bit_c0_register($11, 7); - cvmmemctl.u64 = cvmmemctl_save.u64; - cvmmemctl.s.didtto = 2; - __write_64bit_c0_register($11, 7, cvmmemctl.u64); - } - - switch (size) { - case 4: - *val = cvmx_pcie_config_read32(pcie_port, bus_number, - devfn >> 3, devfn & 0x7, reg); - break; - case 2: - *val = cvmx_pcie_config_read16(pcie_port, bus_number, - devfn >> 3, devfn & 0x7, reg); - break; - case 1: - *val = cvmx_pcie_config_read8(pcie_port, bus_number, devfn >> 3, - devfn & 0x7, reg); - break; - default: - return PCIBIOS_FUNC_NOT_SUPPORTED; - } - - if (OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1) || - OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_1)) - __write_64bit_c0_register($11, 7, cvmmemctl_save.u64); - return PCIBIOS_SUCCESSFUL; -} - -static int octeon_pcie0_read_config(struct pci_bus *bus, unsigned int devfn, - int reg, int size, u32 *val) -{ - return octeon_pcie_read_config(0, bus, devfn, reg, size, val); -} - -static int octeon_pcie1_read_config(struct pci_bus *bus, unsigned int devfn, - int reg, int size, u32 *val) -{ - return octeon_pcie_read_config(1, bus, devfn, reg, size, val); -} - - - -/** - * Write a value to PCI configuration space - * - * @param bus - * @param devfn - * @param reg - * @param size - * @param val - * @return - */ -static inline int octeon_pcie_write_config(int pcie_port, struct pci_bus *bus, - unsigned int devfn, int reg, - int size, u32 val) -{ - int bus_number = bus->number; - /* - * We need to force the bus number to be zero on the root - * bus. Linux numbers the 2nd root bus to start after all - * busses on root 0. - */ - if (bus->parent == NULL) - bus_number = 0; - - switch (size) { - case 4: - cvmx_pcie_config_write32(pcie_port, bus_number, devfn >> 3, - devfn & 0x7, reg, val); - return PCIBIOS_SUCCESSFUL; - case 2: - cvmx_pcie_config_write16(pcie_port, bus_number, devfn >> 3, - devfn & 0x7, reg, val); - return PCIBIOS_SUCCESSFUL; - case 1: - cvmx_pcie_config_write8(pcie_port, bus_number, devfn >> 3, - devfn & 0x7, reg, val); - return PCIBIOS_SUCCESSFUL; - } -#if PCI_CONFIG_SPACE_DELAY - udelay(PCI_CONFIG_SPACE_DELAY); -#endif - return PCIBIOS_FUNC_NOT_SUPPORTED; -} - -static int octeon_pcie0_write_config(struct pci_bus *bus, unsigned int devfn, - int reg, int size, u32 val) -{ - return octeon_pcie_write_config(0, bus, devfn, reg, size, val); -} - -static int octeon_pcie1_write_config(struct pci_bus *bus, unsigned int devfn, - int reg, int size, u32 val) -{ - return octeon_pcie_write_config(1, bus, devfn, reg, size, val); -} - -static struct pci_ops octeon_pcie0_ops = { - octeon_pcie0_read_config, - octeon_pcie0_write_config, -}; - -static struct resource octeon_pcie0_mem_resource = { - .name = "Octeon PCIe0 MEM", - .flags = IORESOURCE_MEM, -}; - -static struct resource octeon_pcie0_io_resource = { - .name = "Octeon PCIe0 IO", - .flags = IORESOURCE_IO, -}; - -static struct pci_controller octeon_pcie0_controller = { - .pci_ops = &octeon_pcie0_ops, - .mem_resource = &octeon_pcie0_mem_resource, - .io_resource = &octeon_pcie0_io_resource, -}; - -static struct pci_ops octeon_pcie1_ops = { - octeon_pcie1_read_config, - octeon_pcie1_write_config, -}; - -static struct resource octeon_pcie1_mem_resource = { - .name = "Octeon PCIe1 MEM", - .flags = IORESOURCE_MEM, -}; - -static struct resource octeon_pcie1_io_resource = { - .name = "Octeon PCIe1 IO", - .flags = IORESOURCE_IO, -}; - -static struct pci_controller octeon_pcie1_controller = { - .pci_ops = &octeon_pcie1_ops, - .mem_resource = &octeon_pcie1_mem_resource, - .io_resource = &octeon_pcie1_io_resource, -}; - - -/** - * Initialize the Octeon PCIe controllers - * - * @return - */ -static int __init octeon_pcie_setup(void) -{ - union cvmx_npei_ctl_status npei_ctl_status; - int result; - - /* These chips don't have PCIe */ - if (!octeon_has_feature(OCTEON_FEATURE_PCIE)) - return 0; - - /* Point pcibios_map_irq() to the PCIe version of it */ - octeon_pcibios_map_irq = octeon_pcie_pcibios_map_irq; - - /* Use the PCIe based DMA mappings */ - octeon_dma_bar_type = OCTEON_DMA_BAR_TYPE_PCIE; - - /* - * PCIe I/O range. It is based on port 0 but includes up until - * port 1's end. - */ - set_io_port_base(CVMX_ADD_IO_SEG(cvmx_pcie_get_io_base_address(0))); - ioport_resource.start = 0; - ioport_resource.end = - cvmx_pcie_get_io_base_address(1) - - cvmx_pcie_get_io_base_address(0) + cvmx_pcie_get_io_size(1) - 1; - - npei_ctl_status.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_CTL_STATUS); - if (npei_ctl_status.s.host_mode) { - pr_notice("PCIe: Initializing port 0\n"); - result = cvmx_pcie_rc_initialize(0); - if (result == 0) { - /* Memory offsets are physical addresses */ - octeon_pcie0_controller.mem_offset = - cvmx_pcie_get_mem_base_address(0); - /* IO offsets are Mips virtual addresses */ - octeon_pcie0_controller.io_map_base = - CVMX_ADD_IO_SEG(cvmx_pcie_get_io_base_address - (0)); - octeon_pcie0_controller.io_offset = 0; - /* - * To keep things similar to PCI, we start - * device addresses at the same place as PCI - * uisng big bar support. This normally - * translates to 4GB-256MB, which is the same - * as most x86 PCs. - */ - octeon_pcie0_controller.mem_resource->start = - cvmx_pcie_get_mem_base_address(0) + - (4ul << 30) - (OCTEON_PCI_BAR1_HOLE_SIZE << 20); - octeon_pcie0_controller.mem_resource->end = - cvmx_pcie_get_mem_base_address(0) + - cvmx_pcie_get_mem_size(0) - 1; - /* - * Ports must be above 16KB for the ISA bus - * filtering in the PCI-X to PCI bridge. - */ - octeon_pcie0_controller.io_resource->start = 4 << 10; - octeon_pcie0_controller.io_resource->end = - cvmx_pcie_get_io_size(0) - 1; - register_pci_controller(&octeon_pcie0_controller); - } - } else { - pr_notice("PCIe: Port 0 in endpoint mode, skipping.\n"); - } - - /* Skip the 2nd port on CN52XX if port 0 is in 4 lane mode */ - if (OCTEON_IS_MODEL(OCTEON_CN52XX)) { - union cvmx_npei_dbg_data npei_dbg_data; - npei_dbg_data.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_DBG_DATA); - if (npei_dbg_data.cn52xx.qlm0_link_width) - return 0; - } - - pr_notice("PCIe: Initializing port 1\n"); - result = cvmx_pcie_rc_initialize(1); - if (result == 0) { - /* Memory offsets are physical addresses */ - octeon_pcie1_controller.mem_offset = - cvmx_pcie_get_mem_base_address(1); - /* IO offsets are Mips virtual addresses */ - octeon_pcie1_controller.io_map_base = - CVMX_ADD_IO_SEG(cvmx_pcie_get_io_base_address(1)); - octeon_pcie1_controller.io_offset = - cvmx_pcie_get_io_base_address(1) - - cvmx_pcie_get_io_base_address(0); - /* - * To keep things similar to PCI, we start device - * addresses at the same place as PCI uisng big bar - * support. This normally translates to 4GB-256MB, - * which is the same as most x86 PCs. - */ - octeon_pcie1_controller.mem_resource->start = - cvmx_pcie_get_mem_base_address(1) + (4ul << 30) - - (OCTEON_PCI_BAR1_HOLE_SIZE << 20); - octeon_pcie1_controller.mem_resource->end = - cvmx_pcie_get_mem_base_address(1) + - cvmx_pcie_get_mem_size(1) - 1; - /* - * Ports must be above 16KB for the ISA bus filtering - * in the PCI-X to PCI bridge. - */ - octeon_pcie1_controller.io_resource->start = - cvmx_pcie_get_io_base_address(1) - - cvmx_pcie_get_io_base_address(0); - octeon_pcie1_controller.io_resource->end = - octeon_pcie1_controller.io_resource->start + - cvmx_pcie_get_io_size(1) - 1; - register_pci_controller(&octeon_pcie1_controller); - } - return 0; -} - -arch_initcall(octeon_pcie_setup); diff --git a/arch/mips/include/asm/octeon/pci-octeon.h b/arch/mips/include/asm/octeon/pci-octeon.h new file mode 100644 index 0000000..6ac5d3e --- /dev/null +++ b/arch/mips/include/asm/octeon/pci-octeon.h @@ -0,0 +1,45 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2005-2009 Cavium Networks + */ + +#ifndef __PCI_OCTEON_H__ +#define __PCI_OCTEON_H__ + +#include <linux/pci.h> + +/* Some PCI cards require delays when accessing config space. */ +#define PCI_CONFIG_SPACE_DELAY 10000 + +/* + * pcibios_map_irq() is defined inside pci-octeon.c. All it does is + * call the Octeon specific version pointed to by this variable. This + * function needs to change for PCI or PCIe based hosts. + */ +extern int (*octeon_pcibios_map_irq)(const struct pci_dev *dev, + u8 slot, u8 pin); + +/* + * The following defines are used when octeon_dma_bar_type = + * OCTEON_DMA_BAR_TYPE_BIG + */ +#define OCTEON_PCI_BAR1_HOLE_BITS 5 +#define OCTEON_PCI_BAR1_HOLE_SIZE (1ul<<(OCTEON_PCI_BAR1_HOLE_BITS+3)) + +enum octeon_dma_bar_type { + OCTEON_DMA_BAR_TYPE_INVALID, + OCTEON_DMA_BAR_TYPE_SMALL, + OCTEON_DMA_BAR_TYPE_BIG, + OCTEON_DMA_BAR_TYPE_PCIE +}; + +/* + * This tells the DMA mapping system in dma-octeon.c how to map PCI + * DMA addresses. + */ +extern enum octeon_dma_bar_type octeon_dma_bar_type; + +#endif diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index e8a97f59e..63d8a29 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -52,3 +52,8 @@ obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o obj-$(CONFIG_MIKROTIK_RB532) += pci-rc32434.o ops-rc32434.o fixup-rc32434.o +obj-$(CONFIG_CPU_CAVIUM_OCTEON) += pci-octeon.o pcie-octeon.o + +ifdef CONFIG_PCI_MSI +obj-$(CONFIG_CPU_CAVIUM_OCTEON) += msi-octeon.o +endif diff --git a/arch/mips/pci/msi-octeon.c b/arch/mips/pci/msi-octeon.c new file mode 100644 index 0000000..03742e6 --- /dev/null +++ b/arch/mips/pci/msi-octeon.c @@ -0,0 +1,288 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2005-2009 Cavium Networks + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/msi.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> + +#include <asm/octeon/octeon.h> +#include <asm/octeon/cvmx-npi-defs.h> +#include <asm/octeon/cvmx-pci-defs.h> +#include <asm/octeon/cvmx-npei-defs.h> +#include <asm/octeon/cvmx-pexp-defs.h> +#include <asm/octeon/pci-octeon.h> + +/* + * Each bit in msi_free_irq_bitmask represents a MSI interrupt that is + * in use. + */ +static uint64_t msi_free_irq_bitmask; + +/* + * Each bit in msi_multiple_irq_bitmask tells that the device using + * this bit in msi_free_irq_bitmask is also using the next bit. This + * is used so we can disable all of the MSI interrupts when a device + * uses multiple. + */ +static uint64_t msi_multiple_irq_bitmask; + +/* + * This lock controls updates to msi_free_irq_bitmask and + * msi_multiple_irq_bitmask. + */ +static DEFINE_SPINLOCK(msi_free_irq_bitmask_lock); + + +/** + * Called when a driver request MSI interrupts instead of the + * legacy INT A-D. This routine will allocate multiple interrupts + * for MSI devices that support them. A device can override this by + * programming the MSI control bits [6:4] before calling + * pci_enable_msi(). + * + * @dev: Device requesting MSI interrupts + * @desc: MSI descriptor + * + * Returns 0 on success. + */ +int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc) +{ + struct msi_msg msg; + uint16_t control; + int configured_private_bits; + int request_private_bits; + int irq; + int irq_step; + uint64_t search_mask; + + /* + * Read the MSI config to figure out how many IRQs this device + * wants. Most devices only want 1, which will give + * configured_private_bits and request_private_bits equal 0. + */ + pci_read_config_word(dev, desc->msi_attrib.pos + PCI_MSI_FLAGS, + &control); + + /* + * If the number of private bits has been configured then use + * that value instead of the requested number. This gives the + * driver the chance to override the number of interrupts + * before calling pci_enable_msi(). + */ + configured_private_bits = (control & PCI_MSI_FLAGS_QSIZE) >> 4; + if (configured_private_bits == 0) { + /* Nothing is configured, so use the hardware requested size */ + request_private_bits = (control & PCI_MSI_FLAGS_QMASK) >> 1; + } else { + /* + * Use the number of configured bits, assuming the + * driver wanted to override the hardware request + * value. + */ + request_private_bits = configured_private_bits; + } + + /* + * The PCI 2.3 spec mandates that there are at most 32 + * interrupts. If this device asks for more, only give it one. + */ + if (request_private_bits > 5) + request_private_bits = 0; + +try_only_one: + /* + * The IRQs have to be aligned on a power of two based on the + * number being requested. + */ + irq_step = 1 << request_private_bits; + + /* Mask with one bit for each IRQ */ + search_mask = (1 << irq_step) - 1; + + /* + * We're going to search msi_free_irq_bitmask_lock for zero + * bits. This represents an MSI interrupt number that isn't in + * use. + */ + spin_lock(&msi_free_irq_bitmask_lock); + for (irq = 0; irq < 64; irq += irq_step) { + if ((msi_free_irq_bitmask & (search_mask << irq)) == 0) { + msi_free_irq_bitmask |= search_mask << irq; + msi_multiple_irq_bitmask |= (search_mask >> 1) << irq; + break; + } + } + spin_unlock(&msi_free_irq_bitmask_lock); + + /* Make sure the search for available interrupts didn't fail */ + if (irq >= 64) { + if (request_private_bits) { + pr_err("arch_setup_msi_irq: Unable to find %d free " + "interrupts, trying just one", + 1 << request_private_bits); + request_private_bits = 0; + goto try_only_one; + } else + panic("arch_setup_msi_irq: Unable to find a free MSI " + "interrupt"); + } + + /* MSI interrupts start at logical IRQ OCTEON_IRQ_MSI_BIT0 */ + irq += OCTEON_IRQ_MSI_BIT0; + + switch (octeon_dma_bar_type) { + case OCTEON_DMA_BAR_TYPE_SMALL: + /* When not using big bar, Bar 0 is based at 128MB */ + msg.address_lo = + ((128ul << 20) + CVMX_PCI_MSI_RCV) & 0xffffffff; + msg.address_hi = ((128ul << 20) + CVMX_PCI_MSI_RCV) >> 32; + case OCTEON_DMA_BAR_TYPE_BIG: + /* When using big bar, Bar 0 is based at 0 */ + msg.address_lo = (0 + CVMX_PCI_MSI_RCV) & 0xffffffff; + msg.address_hi = (0 + CVMX_PCI_MSI_RCV) >> 32; + break; + case OCTEON_DMA_BAR_TYPE_PCIE: + /* When using PCIe, Bar 0 is based at 0 */ + /* FIXME CVMX_NPEI_MSI_RCV* other than 0? */ + msg.address_lo = (0 + CVMX_NPEI_PCIE_MSI_RCV) & 0xffffffff; + msg.address_hi = (0 + CVMX_NPEI_PCIE_MSI_RCV) >> 32; + break; + default: + panic("arch_setup_msi_irq: Invalid octeon_dma_bar_type\n"); + } + msg.data = irq - OCTEON_IRQ_MSI_BIT0; + + /* Update the number of IRQs the device has available to it */ + control &= ~PCI_MSI_FLAGS_QSIZE; + control |= request_private_bits << 4; + pci_write_config_word(dev, desc->msi_attrib.pos + PCI_MSI_FLAGS, + control); + + set_irq_msi(irq, desc); + write_msi_msg(irq, &msg); + return 0; +} + + +/** + * Called when a device no longer needs its MSI interrupts. All + * MSI interrupts for the device are freed. + * + * @irq: The devices first irq number. There may be multple in sequence. + */ +void arch_teardown_msi_irq(unsigned int irq) +{ + int number_irqs; + uint64_t bitmask; + + if ((irq < OCTEON_IRQ_MSI_BIT0) || (irq > OCTEON_IRQ_MSI_BIT63)) + panic("arch_teardown_msi_irq: Attempted to teardown illegal " + "MSI interrupt (%d)", irq); + irq -= OCTEON_IRQ_MSI_BIT0; + + /* + * Count the number of IRQs we need to free by looking at the + * msi_multiple_irq_bitmask. Each bit set means that the next + * IRQ is also owned by this device. + */ + number_irqs = 0; + while ((irq+number_irqs < 64) && + (msi_multiple_irq_bitmask & (1ull << (irq + number_irqs)))) + number_irqs++; + number_irqs++; + /* Mask with one bit for each IRQ */ + bitmask = (1 << number_irqs) - 1; + /* Shift the mask to the correct bit location */ + bitmask <<= irq; + if ((msi_free_irq_bitmask & bitmask) != bitmask) + panic("arch_teardown_msi_irq: Attempted to teardown MSI " + "interrupt (%d) not in use", irq); + + /* Checks are done, update the in use bitmask */ + spin_lock(&msi_free_irq_bitmask_lock); + msi_free_irq_bitmask &= ~bitmask; + msi_multiple_irq_bitmask &= ~bitmask; + spin_unlock(&msi_free_irq_bitmask_lock); +} + + +/* + * Called by the interrupt handling code when an MSI interrupt + * occurs. + */ +static irqreturn_t octeon_msi_interrupt(int cpl, void *dev_id) +{ + uint64_t msi_bits; + int irq; + + if (octeon_dma_bar_type == OCTEON_DMA_BAR_TYPE_PCIE) + msi_bits = cvmx_read_csr(CVMX_PEXP_NPEI_MSI_RCV0); + else + msi_bits = cvmx_read_csr(CVMX_NPI_NPI_MSI_RCV); + irq = fls64(msi_bits); + if (irq) { + irq += OCTEON_IRQ_MSI_BIT0 - 1; + if (irq_desc[irq].action) { + do_IRQ(irq); + return IRQ_HANDLED; + } else { + pr_err("Spurious MSI interrupt %d\n", irq); + if (octeon_has_feature(OCTEON_FEATURE_PCIE)) { + /* These chips have PCIe */ + cvmx_write_csr(CVMX_PEXP_NPEI_MSI_RCV0, + 1ull << (irq - + OCTEON_IRQ_MSI_BIT0)); + } else { + /* These chips have PCI */ + cvmx_write_csr(CVMX_NPI_NPI_MSI_RCV, + 1ull << (irq - + OCTEON_IRQ_MSI_BIT0)); + } + } + } + return IRQ_NONE; +} + + +/* + * Initializes the MSI interrupt handling code + */ +int octeon_msi_initialize(void) +{ + if (octeon_has_feature(OCTEON_FEATURE_PCIE)) { + if (request_irq(OCTEON_IRQ_PCI_MSI0, octeon_msi_interrupt, + IRQF_SHARED, + "MSI[0:63]", octeon_msi_interrupt)) + panic("request_irq(OCTEON_IRQ_PCI_MSI0) failed"); + } else if (octeon_is_pci_host()) { + if (request_irq(OCTEON_IRQ_PCI_MSI0, octeon_msi_interrupt, + IRQF_SHARED, + "MSI[0:15]", octeon_msi_interrupt)) + panic("request_irq(OCTEON_IRQ_PCI_MSI0) failed"); + + if (request_irq(OCTEON_IRQ_PCI_MSI1, octeon_msi_interrupt, + IRQF_SHARED, + "MSI[16:31]", octeon_msi_interrupt)) + panic("request_irq(OCTEON_IRQ_PCI_MSI1) failed"); + + if (request_irq(OCTEON_IRQ_PCI_MSI2, octeon_msi_interrupt, + IRQF_SHARED, + "MSI[32:47]", octeon_msi_interrupt)) + panic("request_irq(OCTEON_IRQ_PCI_MSI2) failed"); + + if (request_irq(OCTEON_IRQ_PCI_MSI3, octeon_msi_interrupt, + IRQF_SHARED, + "MSI[48:63]", octeon_msi_interrupt)) + panic("request_irq(OCTEON_IRQ_PCI_MSI3) failed"); + + } + return 0; +} + +subsys_initcall(octeon_msi_initialize); diff --git a/arch/mips/pci/pci-octeon.c b/arch/mips/pci/pci-octeon.c new file mode 100644 index 0000000..9cb0c807 --- /dev/null +++ b/arch/mips/pci/pci-octeon.c @@ -0,0 +1,675 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2005-2009 Cavium Networks + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/interrupt.h> +#include <linux/time.h> +#include <linux/delay.h> + +#include <asm/time.h> + +#include <asm/octeon/octeon.h> +#include <asm/octeon/cvmx-npi-defs.h> +#include <asm/octeon/cvmx-pci-defs.h> +#include <asm/octeon/pci-octeon.h> + +#define USE_OCTEON_INTERNAL_ARBITER + +/* + * Octeon's PCI controller uses did=3, subdid=2 for PCI IO + * addresses. Use PCI endian swapping 1 so no address swapping is + * necessary. The Linux io routines will endian swap the data. + */ +#define OCTEON_PCI_IOSPACE_BASE 0x80011a0400000000ull +#define OCTEON_PCI_IOSPACE_SIZE (1ull<<32) + +/* Octeon't PCI controller uses did=3, subdid=3 for PCI memory. */ +#define OCTEON_PCI_MEMSPACE_OFFSET (0x00011b0000000000ull) + +/** + * This is the bit decoding used for the Octeon PCI controller addresses + */ +union octeon_pci_address { + uint64_t u64; + struct { + uint64_t upper:2; + uint64_t reserved:13; + uint64_t io:1; + uint64_t did:5; + uint64_t subdid:3; + uint64_t reserved2:4; + uint64_t endian_swap:2; + uint64_t reserved3:10; + uint64_t bus:8; + uint64_t dev:5; + uint64_t func:3; + uint64_t reg:8; + } s; +}; + +int __initdata (*octeon_pcibios_map_irq)(const struct pci_dev *dev, + u8 slot, u8 pin); +enum octeon_dma_bar_type octeon_dma_bar_type = OCTEON_DMA_BAR_TYPE_INVALID; + +/** + * Map a PCI device to the appropriate interrupt line + * + * @dev: The Linux PCI device structure for the device to map + * @slot: The slot number for this device on __BUS 0__. Linux + * enumerates through all the bridges and figures out the + * slot on Bus 0 where this device eventually hooks to. + * @pin: The PCI interrupt pin read from the device, then swizzled + * as it goes through each bridge. + * Returns Interrupt number for the device + */ +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + if (octeon_pcibios_map_irq) + return octeon_pcibios_map_irq(dev, slot, pin); + else + panic("octeon_pcibios_map_irq not set."); +} + + +/* + * Called to perform platform specific PCI setup + */ +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + uint16_t config; + uint32_t dconfig; + int pos; + /* + * Force the Cache line setting to 64 bytes. The standard + * Linux bus scan doesn't seem to set it. Octeon really has + * 128 byte lines, but Intel bridges get really upset if you + * try and set values above 64 bytes. Value is specified in + * 32bit words. + */ + pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 64 / 4); + /* Set latency timers for all devices */ + pci_write_config_byte(dev, PCI_LATENCY_TIMER, 48); + + /* Enable reporting System errors and parity errors on all devices */ + /* Enable parity checking and error reporting */ + pci_read_config_word(dev, PCI_COMMAND, &config); + config |= PCI_COMMAND_PARITY | PCI_COMMAND_SERR; + pci_write_config_word(dev, PCI_COMMAND, config); + + if (dev->subordinate) { + /* Set latency timers on sub bridges */ + pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, 48); + /* More bridge error detection */ + pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &config); + config |= PCI_BRIDGE_CTL_PARITY | PCI_BRIDGE_CTL_SERR; + pci_write_config_word(dev, PCI_BRIDGE_CONTROL, config); + } + + /* Enable the PCIe normal error reporting */ + pos = pci_find_capability(dev, PCI_CAP_ID_EXP); + if (pos) { + /* Update Device Control */ + pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &config); + /* Correctable Error Reporting */ + config |= PCI_EXP_DEVCTL_CERE; + /* Non-Fatal Error Reporting */ + config |= PCI_EXP_DEVCTL_NFERE; + /* Fatal Error Reporting */ + config |= PCI_EXP_DEVCTL_FERE; + /* Unsupported Request */ + config |= PCI_EXP_DEVCTL_URRE; + pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, config); + } + + /* Find the Advanced Error Reporting capability */ + pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR); + if (pos) { + /* Clear Uncorrectable Error Status */ + pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, + &dconfig); + pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, + dconfig); + /* Enable reporting of all uncorrectable errors */ + /* Uncorrectable Error Mask - turned on bits disable errors */ + pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, 0); + /* + * Leave severity at HW default. This only controls if + * errors are reported as uncorrectable or + * correctable, not if the error is reported. + */ + /* PCI_ERR_UNCOR_SEVER - Uncorrectable Error Severity */ + /* Clear Correctable Error Status */ + pci_read_config_dword(dev, pos + PCI_ERR_COR_STATUS, &dconfig); + pci_write_config_dword(dev, pos + PCI_ERR_COR_STATUS, dconfig); + /* Enable reporting of all correctable errors */ + /* Correctable Error Mask - turned on bits disable errors */ + pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, 0); + /* Advanced Error Capabilities */ + pci_read_config_dword(dev, pos + PCI_ERR_CAP, &dconfig); + /* ECRC Generation Enable */ + if (config & PCI_ERR_CAP_ECRC_GENC) + config |= PCI_ERR_CAP_ECRC_GENE; + /* ECRC Check Enable */ + if (config & PCI_ERR_CAP_ECRC_CHKC) + config |= PCI_ERR_CAP_ECRC_CHKE; + pci_write_config_dword(dev, pos + PCI_ERR_CAP, dconfig); + /* PCI_ERR_HEADER_LOG - Header Log Register (16 bytes) */ + /* Report all errors to the root complex */ + pci_write_config_dword(dev, pos + PCI_ERR_ROOT_COMMAND, + PCI_ERR_ROOT_CMD_COR_EN | + PCI_ERR_ROOT_CMD_NONFATAL_EN | + PCI_ERR_ROOT_CMD_FATAL_EN); + /* Clear the Root status register */ + pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, &dconfig); + pci_write_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, dconfig); + } + + return 0; +} + +/** + * Return the mapping of PCI device number to IRQ line. Each + * character in the return string represents the interrupt + * line for the device at that position. Device 1 maps to the + * first character, etc. The characters A-D are used for PCI + * interrupts. + * + * Returns PCI interrupt mapping + */ +const char *octeon_get_pci_interrupts(void) +{ + /* + * Returning an empty string causes the interrupts to be + * routed based on the PCI specification. From the PCI spec: + * + * INTA# of Device Number 0 is connected to IRQW on the system + * board. (Device Number has no significance regarding being + * located on the system board or in a connector.) INTA# of + * Device Number 1 is connected to IRQX on the system + * board. INTA# of Device Number 2 is connected to IRQY on the + * system board. INTA# of Device Number 3 is connected to IRQZ + * on the system board. The table below describes how each + * agent's INTx# lines are connected to the system board + * interrupt lines. The following equation can be used to + * determine to which INTx# signal on the system board a given + * device's INTx# line(s) is connected. + * + * MB = (D + I) MOD 4 MB = System board Interrupt (IRQW = 0, + * IRQX = 1, IRQY = 2, and IRQZ = 3) D = Device Number I = + * Interrupt Number (INTA# = 0, INTB# = 1, INTC# = 2, and + * INTD# = 3) + */ + switch (octeon_bootinfo->board_type) { + case CVMX_BOARD_TYPE_NAO38: + /* This is really the NAC38 */ + return "AAAAADABAAAAAAAAAAAAAAAAAAAAAAAA"; + case CVMX_BOARD_TYPE_THUNDER: + return ""; + case CVMX_BOARD_TYPE_EBH3000: + return ""; + case CVMX_BOARD_TYPE_EBH3100: + case CVMX_BOARD_TYPE_CN3010_EVB_HS5: + case CVMX_BOARD_TYPE_CN3005_EVB_HS5: + return "AAABAAAAAAAAAAAAAAAAAAAAAAAAAAAA"; + case CVMX_BOARD_TYPE_BBGW_REF: + return "AABCD"; + default: + return ""; + } +} + +/** + * Map a PCI device to the appropriate interrupt line + * + * @dev: The Linux PCI device structure for the device to map + * @slot: The slot number for this device on __BUS 0__. Linux + * enumerates through all the bridges and figures out the + * slot on Bus 0 where this device eventually hooks to. + * @pin: The PCI interrupt pin read from the device, then swizzled + * as it goes through each bridge. + * Returns Interrupt number for the device + */ +int __init octeon_pci_pcibios_map_irq(const struct pci_dev *dev, + u8 slot, u8 pin) +{ + int irq_num; + const char *interrupts; + int dev_num; + + /* Get the board specific interrupt mapping */ + interrupts = octeon_get_pci_interrupts(); + + dev_num = dev->devfn >> 3; + if (dev_num < strlen(interrupts)) + irq_num = ((interrupts[dev_num] - 'A' + pin - 1) & 3) + + OCTEON_IRQ_PCI_INT0; + else + irq_num = ((slot + pin - 3) & 3) + OCTEON_IRQ_PCI_INT0; + return irq_num; +} + + +/* + * Read a value from configuration space + */ +static int octeon_read_config(struct pci_bus *bus, unsigned int devfn, + int reg, int size, u32 *val) +{ + union octeon_pci_address pci_addr; + + pci_addr.u64 = 0; + pci_addr.s.upper = 2; + pci_addr.s.io = 1; + pci_addr.s.did = 3; + pci_addr.s.subdid = 1; + pci_addr.s.endian_swap = 1; + pci_addr.s.bus = bus->number; + pci_addr.s.dev = devfn >> 3; + pci_addr.s.func = devfn & 0x7; + pci_addr.s.reg = reg; + +#if PCI_CONFIG_SPACE_DELAY + udelay(PCI_CONFIG_SPACE_DELAY); +#endif + switch (size) { + case 4: + *val = le32_to_cpu(cvmx_read64_uint32(pci_addr.u64)); + return PCIBIOS_SUCCESSFUL; + case 2: + *val = le16_to_cpu(cvmx_read64_uint16(pci_addr.u64)); + return PCIBIOS_SUCCESSFUL; + case 1: + *val = cvmx_read64_uint8(pci_addr.u64); + return PCIBIOS_SUCCESSFUL; + } + return PCIBIOS_FUNC_NOT_SUPPORTED; +} + + +/* + * Write a value to PCI configuration space + */ +static int octeon_write_config(struct pci_bus *bus, unsigned int devfn, + int reg, int size, u32 val) +{ + union octeon_pci_address pci_addr; + + pci_addr.u64 = 0; + pci_addr.s.upper = 2; + pci_addr.s.io = 1; + pci_addr.s.did = 3; + pci_addr.s.subdid = 1; + pci_addr.s.endian_swap = 1; + pci_addr.s.bus = bus->number; + pci_addr.s.dev = devfn >> 3; + pci_addr.s.func = devfn & 0x7; + pci_addr.s.reg = reg; + +#if PCI_CONFIG_SPACE_DELAY + udelay(PCI_CONFIG_SPACE_DELAY); +#endif + switch (size) { + case 4: + cvmx_write64_uint32(pci_addr.u64, cpu_to_le32(val)); + return PCIBIOS_SUCCESSFUL; + case 2: + cvmx_write64_uint16(pci_addr.u64, cpu_to_le16(val)); + return PCIBIOS_SUCCESSFUL; + case 1: + cvmx_write64_uint8(pci_addr.u64, val); + return PCIBIOS_SUCCESSFUL; + } + return PCIBIOS_FUNC_NOT_SUPPORTED; +} + + +static struct pci_ops octeon_pci_ops = { + octeon_read_config, + octeon_write_config, +}; + +static struct resource octeon_pci_mem_resource = { + .start = 0, + .end = 0, + .name = "Octeon PCI MEM", + .flags = IORESOURCE_MEM, +}; + +/* + * PCI ports must be above 16KB so the ISA bus filtering in the PCI-X to PCI + * bridge + */ +static struct resource octeon_pci_io_resource = { + .start = 0x4000, + .end = OCTEON_PCI_IOSPACE_SIZE - 1, + .name = "Octeon PCI IO", + .flags = IORESOURCE_IO, +}; + +static struct pci_controller octeon_pci_controller = { + .pci_ops = &octeon_pci_ops, + .mem_resource = &octeon_pci_mem_resource, + .mem_offset = OCTEON_PCI_MEMSPACE_OFFSET, + .io_resource = &octeon_pci_io_resource, + .io_offset = 0, + .io_map_base = OCTEON_PCI_IOSPACE_BASE, +}; + + +/* + * Low level initialize the Octeon PCI controller + */ +static void octeon_pci_initialize(void) +{ + union cvmx_pci_cfg01 cfg01; + union cvmx_npi_ctl_status ctl_status; + union cvmx_pci_ctl_status_2 ctl_status_2; + union cvmx_pci_cfg19 cfg19; + union cvmx_pci_cfg16 cfg16; + union cvmx_pci_cfg22 cfg22; + union cvmx_pci_cfg56 cfg56; + + /* Reset the PCI Bus */ + cvmx_write_csr(CVMX_CIU_SOFT_PRST, 0x1); + cvmx_read_csr(CVMX_CIU_SOFT_PRST); + + udelay(2000); /* Hold PCI reset for 2 ms */ + + ctl_status.u64 = 0; /* cvmx_read_csr(CVMX_NPI_CTL_STATUS); */ + ctl_status.s.max_word = 1; + ctl_status.s.timer = 1; + cvmx_write_csr(CVMX_NPI_CTL_STATUS, ctl_status.u64); + + /* Deassert PCI reset and advertize PCX Host Mode Device Capability + (64b) */ + cvmx_write_csr(CVMX_CIU_SOFT_PRST, 0x4); + cvmx_read_csr(CVMX_CIU_SOFT_PRST); + + udelay(2000); /* Wait 2 ms after deasserting PCI reset */ + + ctl_status_2.u32 = 0; + ctl_status_2.s.tsr_hwm = 1; /* Initializes to 0. Must be set + before any PCI reads. */ + ctl_status_2.s.bar2pres = 1; /* Enable BAR2 */ + ctl_status_2.s.bar2_enb = 1; + ctl_status_2.s.bar2_cax = 1; /* Don't use L2 */ + ctl_status_2.s.bar2_esx = 1; + ctl_status_2.s.pmo_amod = 1; /* Round robin priority */ + if (octeon_dma_bar_type == OCTEON_DMA_BAR_TYPE_BIG) { + /* BAR1 hole */ + ctl_status_2.s.bb1_hole = OCTEON_PCI_BAR1_HOLE_BITS; + ctl_status_2.s.bb1_siz = 1; /* BAR1 is 2GB */ + ctl_status_2.s.bb_ca = 1; /* Don't use L2 with big bars */ + ctl_status_2.s.bb_es = 1; /* Big bar in byte swap mode */ + ctl_status_2.s.bb1 = 1; /* BAR1 is big */ + ctl_status_2.s.bb0 = 1; /* BAR0 is big */ + } + + octeon_npi_write32(CVMX_NPI_PCI_CTL_STATUS_2, ctl_status_2.u32); + udelay(2000); /* Wait 2 ms before doing PCI reads */ + + ctl_status_2.u32 = octeon_npi_read32(CVMX_NPI_PCI_CTL_STATUS_2); + pr_notice("PCI Status: %s %s-bit\n", + ctl_status_2.s.ap_pcix ? "PCI-X" : "PCI", + ctl_status_2.s.ap_64ad ? "64" : "32"); + + if (OCTEON_IS_MODEL(OCTEON_CN58XX) || OCTEON_IS_MODEL(OCTEON_CN50XX)) { + union cvmx_pci_cnt_reg cnt_reg_start; + union cvmx_pci_cnt_reg cnt_reg_end; + unsigned long cycles, pci_clock; + + cnt_reg_start.u64 = cvmx_read_csr(CVMX_NPI_PCI_CNT_REG); + cycles = read_c0_cvmcount(); + udelay(1000); + cnt_reg_end.u64 = cvmx_read_csr(CVMX_NPI_PCI_CNT_REG); + cycles = read_c0_cvmcount() - cycles; + pci_clock = (cnt_reg_end.s.pcicnt - cnt_reg_start.s.pcicnt) / + (cycles / (mips_hpt_frequency / 1000000)); + pr_notice("PCI Clock: %lu MHz\n", pci_clock); + } + + /* + * TDOMC must be set to one in PCI mode. TDOMC should be set to 4 + * in PCI-X mode to allow four oustanding splits. Otherwise, + * should not change from its reset value. Don't write PCI_CFG19 + * in PCI mode (0x82000001 reset value), write it to 0x82000004 + * after PCI-X mode is known. MRBCI,MDWE,MDRE -> must be zero. + * MRBCM -> must be one. + */ + if (ctl_status_2.s.ap_pcix) { + cfg19.u32 = 0; + /* + * Target Delayed/Split request outstanding maximum + * count. [1..31] and 0=32. NOTE: If the user + * programs these bits beyond the Designed Maximum + * outstanding count, then the designed maximum table + * depth will be used instead. No additional + * Deferred/Split transactions will be accepted if + * this outstanding maximum count is + * reached. Furthermore, no additional deferred/split + * transactions will be accepted if the I/O delay/ I/O + * Split Request outstanding maximum is reached. + */ + cfg19.s.tdomc = 4; + /* + * Master Deferred Read Request Outstanding Max Count + * (PCI only). CR4C[26:24] Max SAC cycles MAX DAC + * cycles 000 8 4 001 1 0 010 2 1 011 3 1 100 4 2 101 + * 5 2 110 6 3 111 7 3 For example, if these bits are + * programmed to 100, the core can support 2 DAC + * cycles, 4 SAC cycles or a combination of 1 DAC and + * 2 SAC cycles. NOTE: For the PCI-X maximum + * outstanding split transactions, refer to + * CRE0[22:20]. + */ + cfg19.s.mdrrmc = 2; + /* + * Master Request (Memory Read) Byte Count/Byte Enable + * select. 0 = Byte Enables valid. In PCI mode, a + * burst transaction cannot be performed using Memory + * Read command=4?h6. 1 = DWORD Byte Count valid + * (default). In PCI Mode, the memory read byte + * enables are automatically generated by the + * core. Note: N3 Master Request transaction sizes are + * always determined through the + * am_attr[<35:32>|<7:0>] field. + */ + cfg19.s.mrbcm = 1; + octeon_npi_write32(CVMX_NPI_PCI_CFG19, cfg19.u32); + } + + + cfg01.u32 = 0; + cfg01.s.msae = 1; /* Memory Space Access Enable */ + cfg01.s.me = 1; /* Master Enable */ + cfg01.s.pee = 1; /* PERR# Enable */ + cfg01.s.see = 1; /* System Error Enable */ + cfg01.s.fbbe = 1; /* Fast Back to Back Transaction Enable */ + + octeon_npi_write32(CVMX_NPI_PCI_CFG01, cfg01.u32); + +#ifdef USE_OCTEON_INTERNAL_ARBITER + /* + * When OCTEON is a PCI host, most systems will use OCTEON's + * internal arbiter, so must enable it before any PCI/PCI-X + * traffic can occur. + */ + { + union cvmx_npi_pci_int_arb_cfg pci_int_arb_cfg; + + pci_int_arb_cfg.u64 = 0; + pci_int_arb_cfg.s.en = 1; /* Internal arbiter enable */ + cvmx_write_csr(CVMX_NPI_PCI_INT_ARB_CFG, pci_int_arb_cfg.u64); + } +#endif /* USE_OCTEON_INTERNAL_ARBITER */ + + /* + * Preferrably written to 1 to set MLTD. [RDSATI,TRTAE, + * TWTAE,TMAE,DPPMR -> must be zero. TILT -> must not be set to + * 1..7. + */ + cfg16.u32 = 0; + cfg16.s.mltd = 1; /* Master Latency Timer Disable */ + octeon_npi_write32(CVMX_NPI_PCI_CFG16, cfg16.u32); + + /* + * Should be written to 0x4ff00. MTTV -> must be zero. + * FLUSH -> must be 1. MRV -> should be 0xFF. + */ + cfg22.u32 = 0; + /* Master Retry Value [1..255] and 0=infinite */ + cfg22.s.mrv = 0xff; + /* + * AM_DO_FLUSH_I control NOTE: This bit MUST BE ONE for proper + * N3K operation. + */ + cfg22.s.flush = 1; + octeon_npi_write32(CVMX_NPI_PCI_CFG22, cfg22.u32); + + /* + * MOST Indicates the maximum number of outstanding splits (in -1 + * notation) when OCTEON is in PCI-X mode. PCI-X performance is + * affected by the MOST selection. Should generally be written + * with one of 0x3be807, 0x2be807, 0x1be807, or 0x0be807, + * depending on the desired MOST of 3, 2, 1, or 0, respectively. + */ + cfg56.u32 = 0; + cfg56.s.pxcid = 7; /* RO - PCI-X Capability ID */ + cfg56.s.ncp = 0xe8; /* RO - Next Capability Pointer */ + cfg56.s.dpere = 1; /* Data Parity Error Recovery Enable */ + cfg56.s.roe = 1; /* Relaxed Ordering Enable */ + cfg56.s.mmbc = 1; /* Maximum Memory Byte Count + [0=512B,1=1024B,2=2048B,3=4096B] */ + cfg56.s.most = 3; /* Maximum outstanding Split transactions [0=1 + .. 7=32] */ + + octeon_npi_write32(CVMX_NPI_PCI_CFG56, cfg56.u32); + + /* + * Affects PCI performance when OCTEON services reads to its + * BAR1/BAR2. Refer to Section 10.6.1. The recommended values are + * 0x22, 0x33, and 0x33 for PCI_READ_CMD_6, PCI_READ_CMD_C, and + * PCI_READ_CMD_E, respectively. Unfortunately due to errata DDR-700, + * these values need to be changed so they won't possibly prefetch off + * of the end of memory if PCI is DMAing a buffer at the end of + * memory. Note that these values differ from their reset values. + */ + octeon_npi_write32(CVMX_NPI_PCI_READ_CMD_6, 0x21); + octeon_npi_write32(CVMX_NPI_PCI_READ_CMD_C, 0x31); + octeon_npi_write32(CVMX_NPI_PCI_READ_CMD_E, 0x31); +} + + +/* + * Initialize the Octeon PCI controller + */ +static int __init octeon_pci_setup(void) +{ + union cvmx_npi_mem_access_subidx mem_access; + int index; + + /* Only these chips have PCI */ + if (octeon_has_feature(OCTEON_FEATURE_PCIE)) + return 0; + + /* Point pcibios_map_irq() to the PCI version of it */ + octeon_pcibios_map_irq = octeon_pci_pcibios_map_irq; + + /* Only use the big bars on chips that support it */ + if (OCTEON_IS_MODEL(OCTEON_CN31XX) || + OCTEON_IS_MODEL(OCTEON_CN38XX_PASS2) || + OCTEON_IS_MODEL(OCTEON_CN38XX_PASS1)) + octeon_dma_bar_type = OCTEON_DMA_BAR_TYPE_SMALL; + else + octeon_dma_bar_type = OCTEON_DMA_BAR_TYPE_BIG; + + /* PCI I/O and PCI MEM values */ + set_io_port_base(OCTEON_PCI_IOSPACE_BASE); + ioport_resource.start = 0; + ioport_resource.end = OCTEON_PCI_IOSPACE_SIZE - 1; + if (!octeon_is_pci_host()) { + pr_notice("Not in host mode, PCI Controller not initialized\n"); + return 0; + } + + pr_notice("%s Octeon big bar support\n", + (octeon_dma_bar_type == + OCTEON_DMA_BAR_TYPE_BIG) ? "Enabling" : "Disabling"); + + octeon_pci_initialize(); + + mem_access.u64 = 0; + mem_access.s.esr = 1; /* Endian-Swap on read. */ + mem_access.s.esw = 1; /* Endian-Swap on write. */ + mem_access.s.nsr = 0; /* No-Snoop on read. */ + mem_access.s.nsw = 0; /* No-Snoop on write. */ + mem_access.s.ror = 0; /* Relax Read on read. */ + mem_access.s.row = 0; /* Relax Order on write. */ + mem_access.s.ba = 0; /* PCI Address bits [63:36]. */ + cvmx_write_csr(CVMX_NPI_MEM_ACCESS_SUBID3, mem_access.u64); + + /* + * Remap the Octeon BAR 2 above all 32 bit devices + * (0x8000000000ul). This is done here so it is remapped + * before the readl()'s below. We don't want BAR2 overlapping + * with BAR0/BAR1 during these reads. + */ + octeon_npi_write32(CVMX_NPI_PCI_CFG08, 0); + octeon_npi_write32(CVMX_NPI_PCI_CFG09, 0x80); + + /* Disable the BAR1 movable mappings */ + for (index = 0; index < 32; index++) + octeon_npi_write32(CVMX_NPI_PCI_BAR1_INDEXX(index), 0); + + if (octeon_dma_bar_type == OCTEON_DMA_BAR_TYPE_BIG) { + /* Remap the Octeon BAR 0 to 0-2GB */ + octeon_npi_write32(CVMX_NPI_PCI_CFG04, 0); + octeon_npi_write32(CVMX_NPI_PCI_CFG05, 0); + + /* + * Remap the Octeon BAR 1 to map 2GB-4GB (minus the + * BAR 1 hole). + */ + octeon_npi_write32(CVMX_NPI_PCI_CFG06, 2ul << 30); + octeon_npi_write32(CVMX_NPI_PCI_CFG07, 0); + + /* Devices go after BAR1 */ + octeon_pci_mem_resource.start = + OCTEON_PCI_MEMSPACE_OFFSET + (4ul << 30) - + (OCTEON_PCI_BAR1_HOLE_SIZE << 20); + octeon_pci_mem_resource.end = + octeon_pci_mem_resource.start + (1ul << 30); + } else { + /* Remap the Octeon BAR 0 to map 128MB-(128MB+4KB) */ + octeon_npi_write32(CVMX_NPI_PCI_CFG04, 128ul << 20); + octeon_npi_write32(CVMX_NPI_PCI_CFG05, 0); + + /* Remap the Octeon BAR 1 to map 0-128MB */ + octeon_npi_write32(CVMX_NPI_PCI_CFG06, 0); + octeon_npi_write32(CVMX_NPI_PCI_CFG07, 0); + + /* Devices go after BAR0 */ + octeon_pci_mem_resource.start = + OCTEON_PCI_MEMSPACE_OFFSET + (128ul << 20) + + (4ul << 10); + octeon_pci_mem_resource.end = + octeon_pci_mem_resource.start + (1ul << 30); + } + + register_pci_controller(&octeon_pci_controller); + + /* + * Clear any errors that might be pending from before the bus + * was setup properly. + */ + cvmx_write_csr(CVMX_NPI_PCI_INT_SUM2, -1); + return 0; +} + +arch_initcall(octeon_pci_setup); diff --git a/arch/mips/pci/pcie-octeon.c b/arch/mips/pci/pcie-octeon.c new file mode 100644 index 0000000..7526224 --- /dev/null +++ b/arch/mips/pci/pcie-octeon.c @@ -0,0 +1,1369 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2007, 2008 Cavium Networks + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/interrupt.h> +#include <linux/time.h> +#include <linux/delay.h> + +#include <asm/octeon/octeon.h> +#include <asm/octeon/cvmx-npei-defs.h> +#include <asm/octeon/cvmx-pciercx-defs.h> +#include <asm/octeon/cvmx-pescx-defs.h> +#include <asm/octeon/cvmx-pexp-defs.h> +#include <asm/octeon/cvmx-helper-errata.h> +#include <asm/octeon/pci-octeon.h> + +union cvmx_pcie_address { + uint64_t u64; + struct { + uint64_t upper:2; /* Normally 2 for XKPHYS */ + uint64_t reserved_49_61:13; /* Must be zero */ + uint64_t io:1; /* 1 for IO space access */ + uint64_t did:5; /* PCIe DID = 3 */ + uint64_t subdid:3; /* PCIe SubDID = 1 */ + uint64_t reserved_36_39:4; /* Must be zero */ + uint64_t es:2; /* Endian swap = 1 */ + uint64_t port:2; /* PCIe port 0,1 */ + uint64_t reserved_29_31:3; /* Must be zero */ + /* + * Selects the type of the configuration request (0 = type 0, + * 1 = type 1). + */ + uint64_t ty:1; + /* Target bus number sent in the ID in the request. */ + uint64_t bus:8; + /* + * Target device number sent in the ID in the + * request. Note that Dev must be zero for type 0 + * configuration requests. + */ + uint64_t dev:5; + /* Target function number sent in the ID in the request. */ + uint64_t func:3; + /* + * Selects a register in the configuration space of + * the target. + */ + uint64_t reg:12; + } config; + struct { + uint64_t upper:2; /* Normally 2 for XKPHYS */ + uint64_t reserved_49_61:13; /* Must be zero */ + uint64_t io:1; /* 1 for IO space access */ + uint64_t did:5; /* PCIe DID = 3 */ + uint64_t subdid:3; /* PCIe SubDID = 2 */ + uint64_t reserved_36_39:4; /* Must be zero */ + uint64_t es:2; /* Endian swap = 1 */ + uint64_t port:2; /* PCIe port 0,1 */ + uint64_t address:32; /* PCIe IO address */ + } io; + struct { + uint64_t upper:2; /* Normally 2 for XKPHYS */ + uint64_t reserved_49_61:13; /* Must be zero */ + uint64_t io:1; /* 1 for IO space access */ + uint64_t did:5; /* PCIe DID = 3 */ + uint64_t subdid:3; /* PCIe SubDID = 3-6 */ + uint64_t reserved_36_39:4; /* Must be zero */ + uint64_t address:36; /* PCIe Mem address */ + } mem; +}; + +/** + * Return the Core virtual base address for PCIe IO access. IOs are + * read/written as an offset from this address. + * + * @pcie_port: PCIe port the IO is for + * + * Returns 64bit Octeon IO base address for read/write + */ +static inline uint64_t cvmx_pcie_get_io_base_address(int pcie_port) +{ + union cvmx_pcie_address pcie_addr; + pcie_addr.u64 = 0; + pcie_addr.io.upper = 0; + pcie_addr.io.io = 1; + pcie_addr.io.did = 3; + pcie_addr.io.subdid = 2; + pcie_addr.io.es = 1; + pcie_addr.io.port = pcie_port; + return pcie_addr.u64; +} + +/** + * Size of the IO address region returned at address + * cvmx_pcie_get_io_base_address() + * + * @pcie_port: PCIe port the IO is for + * + * Returns Size of the IO window + */ +static inline uint64_t cvmx_pcie_get_io_size(int pcie_port) +{ + return 1ull << 32; +} + +/** + * Return the Core virtual base address for PCIe MEM access. Memory is + * read/written as an offset from this address. + * + * @pcie_port: PCIe port the IO is for + * + * Returns 64bit Octeon IO base address for read/write + */ +static inline uint64_t cvmx_pcie_get_mem_base_address(int pcie_port) +{ + union cvmx_pcie_address pcie_addr; + pcie_addr.u64 = 0; + pcie_addr.mem.upper = 0; + pcie_addr.mem.io = 1; + pcie_addr.mem.did = 3; + pcie_addr.mem.subdid = 3 + pcie_port; + return pcie_addr.u64; +} + +/** + * Size of the Mem address region returned at address + * cvmx_pcie_get_mem_base_address() + * + * @pcie_port: PCIe port the IO is for + * + * Returns Size of the Mem window + */ +static inline uint64_t cvmx_pcie_get_mem_size(int pcie_port) +{ + return 1ull << 36; +} + +/** + * Read a PCIe config space register indirectly. This is used for + * registers of the form PCIEEP_CFG??? and PCIERC?_CFG???. + * + * @pcie_port: PCIe port to read from + * @cfg_offset: Address to read + * + * Returns Value read + */ +static uint32_t cvmx_pcie_cfgx_read(int pcie_port, uint32_t cfg_offset) +{ + union cvmx_pescx_cfg_rd pescx_cfg_rd; + pescx_cfg_rd.u64 = 0; + pescx_cfg_rd.s.addr = cfg_offset; + cvmx_write_csr(CVMX_PESCX_CFG_RD(pcie_port), pescx_cfg_rd.u64); + pescx_cfg_rd.u64 = cvmx_read_csr(CVMX_PESCX_CFG_RD(pcie_port)); + return pescx_cfg_rd.s.data; +} + +/** + * Write a PCIe config space register indirectly. This is used for + * registers of the form PCIEEP_CFG??? and PCIERC?_CFG???. + * + * @pcie_port: PCIe port to write to + * @cfg_offset: Address to write + * @val: Value to write + */ +static void cvmx_pcie_cfgx_write(int pcie_port, uint32_t cfg_offset, + uint32_t val) +{ + union cvmx_pescx_cfg_wr pescx_cfg_wr; + pescx_cfg_wr.u64 = 0; + pescx_cfg_wr.s.addr = cfg_offset; + pescx_cfg_wr.s.data = val; + cvmx_write_csr(CVMX_PESCX_CFG_WR(pcie_port), pescx_cfg_wr.u64); +} + +/** + * Build a PCIe config space request address for a device + * + * @pcie_port: PCIe port to access + * @bus: Sub bus + * @dev: Device ID + * @fn: Device sub function + * @reg: Register to access + * + * Returns 64bit Octeon IO address + */ +static inline uint64_t __cvmx_pcie_build_config_addr(int pcie_port, int bus, + int dev, int fn, int reg) +{ + union cvmx_pcie_address pcie_addr; + union cvmx_pciercx_cfg006 pciercx_cfg006; + + pciercx_cfg006.u32 = + cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG006(pcie_port)); + if ((bus <= pciercx_cfg006.s.pbnum) && (dev != 0)) + return 0; + + pcie_addr.u64 = 0; + pcie_addr.config.upper = 2; + pcie_addr.config.io = 1; + pcie_addr.config.did = 3; + pcie_addr.config.subdid = 1; + pcie_addr.config.es = 1; + pcie_addr.config.port = pcie_port; + pcie_addr.config.ty = (bus > pciercx_cfg006.s.pbnum); + pcie_addr.config.bus = bus; + pcie_addr.config.dev = dev; + pcie_addr.config.func = fn; + pcie_addr.config.reg = reg; + return pcie_addr.u64; +} + +/** + * Read 8bits from a Device's config space + * + * @pcie_port: PCIe port the device is on + * @bus: Sub bus + * @dev: Device ID + * @fn: Device sub function + * @reg: Register to access + * + * Returns Result of the read + */ +static uint8_t cvmx_pcie_config_read8(int pcie_port, int bus, int dev, + int fn, int reg) +{ + uint64_t address = + __cvmx_pcie_build_config_addr(pcie_port, bus, dev, fn, reg); + if (address) + return cvmx_read64_uint8(address); + else + return 0xff; +} + +/** + * Read 16bits from a Device's config space + * + * @pcie_port: PCIe port the device is on + * @bus: Sub bus + * @dev: Device ID + * @fn: Device sub function + * @reg: Register to access + * + * Returns Result of the read + */ +static uint16_t cvmx_pcie_config_read16(int pcie_port, int bus, int dev, + int fn, int reg) +{ + uint64_t address = + __cvmx_pcie_build_config_addr(pcie_port, bus, dev, fn, reg); + if (address) + return le16_to_cpu(cvmx_read64_uint16(address)); + else + return 0xffff; +} + +/** + * Read 32bits from a Device's config space + * + * @pcie_port: PCIe port the device is on + * @bus: Sub bus + * @dev: Device ID + * @fn: Device sub function + * @reg: Register to access + * + * Returns Result of the read + */ +static uint32_t cvmx_pcie_config_read32(int pcie_port, int bus, int dev, + int fn, int reg) +{ + uint64_t address = + __cvmx_pcie_build_config_addr(pcie_port, bus, dev, fn, reg); + if (address) + return le32_to_cpu(cvmx_read64_uint32(address)); + else + return 0xffffffff; +} + +/** + * Write 8bits to a Device's config space + * + * @pcie_port: PCIe port the device is on + * @bus: Sub bus + * @dev: Device ID + * @fn: Device sub function + * @reg: Register to access + * @val: Value to write + */ +static void cvmx_pcie_config_write8(int pcie_port, int bus, int dev, int fn, + int reg, uint8_t val) +{ + uint64_t address = + __cvmx_pcie_build_config_addr(pcie_port, bus, dev, fn, reg); + if (address) + cvmx_write64_uint8(address, val); +} + +/** + * Write 16bits to a Device's config space + * + * @pcie_port: PCIe port the device is on + * @bus: Sub bus + * @dev: Device ID + * @fn: Device sub function + * @reg: Register to access + * @val: Value to write + */ +static void cvmx_pcie_config_write16(int pcie_port, int bus, int dev, int fn, + int reg, uint16_t val) +{ + uint64_t address = + __cvmx_pcie_build_config_addr(pcie_port, bus, dev, fn, reg); + if (address) + cvmx_write64_uint16(address, cpu_to_le16(val)); +} + +/** + * Write 32bits to a Device's config space + * + * @pcie_port: PCIe port the device is on + * @bus: Sub bus + * @dev: Device ID + * @fn: Device sub function + * @reg: Register to access + * @val: Value to write + */ +static void cvmx_pcie_config_write32(int pcie_port, int bus, int dev, int fn, + int reg, uint32_t val) +{ + uint64_t address = + __cvmx_pcie_build_config_addr(pcie_port, bus, dev, fn, reg); + if (address) + cvmx_write64_uint32(address, cpu_to_le32(val)); +} + +/** + * Initialize the RC config space CSRs + * + * @pcie_port: PCIe port to initialize + */ +static void __cvmx_pcie_rc_initialize_config_space(int pcie_port) +{ + union cvmx_pciercx_cfg030 pciercx_cfg030; + union cvmx_npei_ctl_status2 npei_ctl_status2; + union cvmx_pciercx_cfg070 pciercx_cfg070; + union cvmx_pciercx_cfg001 pciercx_cfg001; + union cvmx_pciercx_cfg032 pciercx_cfg032; + union cvmx_pciercx_cfg006 pciercx_cfg006; + union cvmx_pciercx_cfg008 pciercx_cfg008; + union cvmx_pciercx_cfg009 pciercx_cfg009; + union cvmx_pciercx_cfg010 pciercx_cfg010; + union cvmx_pciercx_cfg011 pciercx_cfg011; + union cvmx_pciercx_cfg035 pciercx_cfg035; + union cvmx_pciercx_cfg075 pciercx_cfg075; + union cvmx_pciercx_cfg034 pciercx_cfg034; + + /* Max Payload Size (PCIE*_CFG030[MPS]) */ + /* Max Read Request Size (PCIE*_CFG030[MRRS]) */ + /* Relaxed-order, no-snoop enables (PCIE*_CFG030[RO_EN,NS_EN] */ + /* Error Message Enables (PCIE*_CFG030[CE_EN,NFE_EN,FE_EN,UR_EN]) */ + pciercx_cfg030.u32 = + cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG030(pcie_port)); + /* + * Max payload size = 128 bytes for best Octeon DMA + * performance. + */ + pciercx_cfg030.s.mps = 0; + /* + * Max read request size = 128 bytes for best Octeon DMA + * performance. + */ + pciercx_cfg030.s.mrrs = 0; + /* Enable relaxed ordering. */ + pciercx_cfg030.s.ro_en = 1; + /* Enable no snoop. */ + pciercx_cfg030.s.ns_en = 1; + /* Correctable error reporting enable. */ + pciercx_cfg030.s.ce_en = 1; + /* Non-fatal error reporting enable. */ + pciercx_cfg030.s.nfe_en = 1; + /* Fatal error reporting enable. */ + pciercx_cfg030.s.fe_en = 1; + /* Unsupported request reporting enable. */ + pciercx_cfg030.s.ur_en = 1; + cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG030(pcie_port), + pciercx_cfg030.u32); + + /* + * Max Payload Size (NPEI_CTL_STATUS2[MPS]) must match + * PCIE*_CFG030[MPS] + * + * Max Read Request Size (NPEI_CTL_STATUS2[MRRS]) must not + * exceed PCIE*_CFG030[MRRS]. + */ + npei_ctl_status2.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_CTL_STATUS2); + /* Max payload size = 128 bytes for best Octeon DMA performance */ + npei_ctl_status2.s.mps = 0; + /* Max read request size = 128 bytes for best Octeon DMA performance */ + npei_ctl_status2.s.mrrs = 0; + cvmx_write_csr(CVMX_PEXP_NPEI_CTL_STATUS2, npei_ctl_status2.u64); + + /* ECRC Generation (PCIE*_CFG070[GE,CE]) */ + pciercx_cfg070.u32 = + cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG070(pcie_port)); + pciercx_cfg070.s.ge = 1; /* ECRC generation enable. */ + pciercx_cfg070.s.ce = 1; /* ECRC check enable. */ + cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG070(pcie_port), + pciercx_cfg070.u32); + + /* + * Access Enables (PCIE*_CFG001[MSAE,ME]) ME and MSAE should + * always be set. + * + * Interrupt Disable (PCIE*_CFG001[I_DIS]) System Error + * Message Enable (PCIE*_CFG001[SEE]) + */ + pciercx_cfg001.u32 = + cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG001(pcie_port)); + pciercx_cfg001.s.msae = 1; /* Memory space enable. */ + pciercx_cfg001.s.me = 1; /* Bus master enable. */ + pciercx_cfg001.s.i_dis = 1; /* INTx assertion disable. */ + pciercx_cfg001.s.see = 1; /* SERR# enable */ + cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG001(pcie_port), + pciercx_cfg001.u32); + + /* Advanced Error Recovery Message Enables */ + /* (PCIE*_CFG066,PCIE*_CFG067,PCIE*_CFG069) */ + cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG066(pcie_port), 0); + /* Use CVMX_PCIERCX_CFG067 hardware default */ + cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG069(pcie_port), 0); + + /* Active State Power Management (PCIE*_CFG032[ASLPC]) */ + pciercx_cfg032.u32 = + cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG032(pcie_port)); + pciercx_cfg032.s.aslpc = 0; /* Active state Link PM control. */ + cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG032(pcie_port), + pciercx_cfg032.u32); + + /* Entrance Latencies (PCIE*_CFG451[L0EL,L1EL]) */ + + /* + * Link Width Mode (PCIERCn_CFG452[LME]) - Set during + * cvmx_pcie_rc_initialize_link() + * + * Primary Bus Number (PCIERCn_CFG006[PBNUM]) + * + * We set the primary bus number to 1 so IDT bridges are + * happy. They don't like zero. + */ + pciercx_cfg006.u32 = 0; + pciercx_cfg006.s.pbnum = 1; + pciercx_cfg006.s.sbnum = 1; + pciercx_cfg006.s.subbnum = 1; + cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG006(pcie_port), + pciercx_cfg006.u32); + + /* + * Memory-mapped I/O BAR (PCIERCn_CFG008) + * Most applications should disable the memory-mapped I/O BAR by + * setting PCIERCn_CFG008[ML_ADDR] < PCIERCn_CFG008[MB_ADDR] + */ + pciercx_cfg008.u32 = 0; + pciercx_cfg008.s.mb_addr = 0x100; + pciercx_cfg008.s.ml_addr = 0; + cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG008(pcie_port), + pciercx_cfg008.u32); + + /* + * Prefetchable BAR (PCIERCn_CFG009,PCIERCn_CFG010,PCIERCn_CFG011) + * Most applications should disable the prefetchable BAR by setting + * PCIERCn_CFG011[UMEM_LIMIT],PCIERCn_CFG009[LMEM_LIMIT] < + * PCIERCn_CFG010[UMEM_BASE],PCIERCn_CFG009[LMEM_BASE] + */ + pciercx_cfg009.u32 = + cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG009(pcie_port)); + pciercx_cfg010.u32 = + cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG010(pcie_port)); + pciercx_cfg011.u32 = + cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG011(pcie_port)); + pciercx_cfg009.s.lmem_base = 0x100; + pciercx_cfg009.s.lmem_limit = 0; + pciercx_cfg010.s.umem_base = 0x100; + pciercx_cfg011.s.umem_limit = 0; + cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG009(pcie_port), + pciercx_cfg009.u32); + cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG010(pcie_port), + pciercx_cfg010.u32); + cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG011(pcie_port), + pciercx_cfg011.u32); + + /* + * System Error Interrupt Enables (PCIERCn_CFG035[SECEE,SEFEE,SENFEE]) + * PME Interrupt Enables (PCIERCn_CFG035[PMEIE]) + */ + pciercx_cfg035.u32 = + cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG035(pcie_port)); + /* System error on correctable error enable. */ + pciercx_cfg035.s.secee = 1; + /* System error on fatal error enable. */ + pciercx_cfg035.s.sefee = 1; + /* System error on non-fatal error enable. */ + pciercx_cfg035.s.senfee = 1; + /* PME interrupt enable. */ + pciercx_cfg035.s.pmeie = 1; + cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG035(pcie_port), + pciercx_cfg035.u32); + + /* + * Advanced Error Recovery Interrupt Enables + * (PCIERCn_CFG075[CERE,NFERE,FERE]) + */ + pciercx_cfg075.u32 = + cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG075(pcie_port)); + /* Correctable error reporting enable. */ + pciercx_cfg075.s.cere = 1; + /* Non-fatal error reporting enable. */ + pciercx_cfg075.s.nfere = 1; + /* Fatal error reporting enable. */ + pciercx_cfg075.s.fere = 1; + cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG075(pcie_port), + pciercx_cfg075.u32); + + /* HP Interrupt Enables (PCIERCn_CFG034[HPINT_EN], + * PCIERCn_CFG034[DLLS_EN,CCINT_EN]) + */ + pciercx_cfg034.u32 = + cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG034(pcie_port)); + /* Hot-plug interrupt enable. */ + pciercx_cfg034.s.hpint_en = 1; + /* Data Link Layer state changed enable */ + pciercx_cfg034.s.dlls_en = 1; + /* Command completed interrupt enable. */ + pciercx_cfg034.s.ccint_en = 1; + cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG034(pcie_port), + pciercx_cfg034.u32); +} + +/** + * Initialize a host mode PCIe link. This function takes a PCIe + * port from reset to a link up state. Software can then begin + * configuring the rest of the link. + * + * @pcie_port: PCIe port to initialize + * + * Returns Zero on success + */ +static int __cvmx_pcie_rc_initialize_link(int pcie_port) +{ + uint64_t start_cycle; + union cvmx_pescx_ctl_status pescx_ctl_status; + union cvmx_pciercx_cfg452 pciercx_cfg452; + union cvmx_pciercx_cfg032 pciercx_cfg032; + union cvmx_pciercx_cfg448 pciercx_cfg448; + + /* Set the lane width */ + pciercx_cfg452.u32 = + cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG452(pcie_port)); + pescx_ctl_status.u64 = cvmx_read_csr(CVMX_PESCX_CTL_STATUS(pcie_port)); + if (pescx_ctl_status.s.qlm_cfg == 0) { + /* We're in 8 lane (56XX) or 4 lane (54XX) mode */ + pciercx_cfg452.s.lme = 0xf; + } else { + /* We're in 4 lane (56XX) or 2 lane (52XX) mode */ + pciercx_cfg452.s.lme = 0x7; + } + cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG452(pcie_port), + pciercx_cfg452.u32); + + /* + * CN52XX pass 1.x has an errata where length mismatches on UR + * responses can cause bus errors on 64bit memory + * reads. Turning off length error checking fixes this. + */ + if (OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_X)) { + union cvmx_pciercx_cfg455 pciercx_cfg455; + pciercx_cfg455.u32 = + cvmx_pcie_cfgx_read(pcie_port, + CVMX_PCIERCX_CFG455(pcie_port)); + pciercx_cfg455.s.m_cpl_len_err = 1; + cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG455(pcie_port), + pciercx_cfg455.u32); + } + + /* Lane swap needs to be manually enabled for CN52XX */ + if (OCTEON_IS_MODEL(OCTEON_CN52XX) && (pcie_port == 1)) { + pescx_ctl_status.s.lane_swp = 1; + cvmx_write_csr(CVMX_PESCX_CTL_STATUS(pcie_port), + pescx_ctl_status.u64); + } + + /* Bring up the link */ + pescx_ctl_status.u64 = cvmx_read_csr(CVMX_PESCX_CTL_STATUS(pcie_port)); + pescx_ctl_status.s.lnk_enb = 1; + cvmx_write_csr(CVMX_PESCX_CTL_STATUS(pcie_port), pescx_ctl_status.u64); + + /* + * CN52XX pass 1.0: Due to a bug in 2nd order CDR, it needs to + * be disabled. + */ + if (OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_0)) + __cvmx_helper_errata_qlm_disable_2nd_order_cdr(0); + + /* Wait for the link to come up */ + cvmx_dprintf("PCIe: Waiting for port %d link\n", pcie_port); + start_cycle = cvmx_get_cycle(); + do { + if (cvmx_get_cycle() - start_cycle > + 2 * cvmx_sysinfo_get()->cpu_clock_hz) { + cvmx_dprintf("PCIe: Port %d link timeout\n", + pcie_port); + return -1; + } + cvmx_wait(10000); + pciercx_cfg032.u32 = + cvmx_pcie_cfgx_read(pcie_port, + CVMX_PCIERCX_CFG032(pcie_port)); + } while (pciercx_cfg032.s.dlla == 0); + + /* Display the link status */ + cvmx_dprintf("PCIe: Port %d link active, %d lanes\n", pcie_port, + pciercx_cfg032.s.nlw); + + /* + * Update the Replay Time Limit. Empirically, some PCIe + * devices take a little longer to respond than expected under + * load. As a workaround for this we configure the Replay Time + * Limit to the value expected for a 512 byte MPS instead of + * our actual 256 byte MPS. The numbers below are directly + * from the PCIe spec table 3-4. + */ + pciercx_cfg448.u32 = + cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG448(pcie_port)); + switch (pciercx_cfg032.s.nlw) { + case 1: /* 1 lane */ + pciercx_cfg448.s.rtl = 1677; + break; + case 2: /* 2 lanes */ + pciercx_cfg448.s.rtl = 867; + break; + case 4: /* 4 lanes */ + pciercx_cfg448.s.rtl = 462; + break; + case 8: /* 8 lanes */ + pciercx_cfg448.s.rtl = 258; + break; + } + cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG448(pcie_port), + pciercx_cfg448.u32); + + return 0; +} + +/** + * Initialize a PCIe port for use in host(RC) mode. It doesn't + * enumerate the bus. + * + * @pcie_port: PCIe port to initialize + * + * Returns Zero on success + */ +static int cvmx_pcie_rc_initialize(int pcie_port) +{ + int i; + union cvmx_ciu_soft_prst ciu_soft_prst; + union cvmx_pescx_bist_status pescx_bist_status; + union cvmx_pescx_bist_status2 pescx_bist_status2; + union cvmx_npei_ctl_status npei_ctl_status; + union cvmx_npei_mem_access_ctl npei_mem_access_ctl; + union cvmx_npei_mem_access_subidx mem_access_subid; + union cvmx_npei_dbg_data npei_dbg_data; + union cvmx_pescx_ctl_status2 pescx_ctl_status2; + + /* + * Make sure we aren't trying to setup a target mode interface + * in host mode. + */ + npei_ctl_status.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_CTL_STATUS); + if ((pcie_port == 0) && !npei_ctl_status.s.host_mode) { + cvmx_dprintf("PCIe: ERROR: cvmx_pcie_rc_initialize() called " + "on port0, but port0 is not in host mode\n"); + return -1; + } + + /* + * Make sure a CN52XX isn't trying to bring up port 1 when it + * is disabled. + */ + if (OCTEON_IS_MODEL(OCTEON_CN52XX)) { + npei_dbg_data.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_DBG_DATA); + if ((pcie_port == 1) && npei_dbg_data.cn52xx.qlm0_link_width) { + cvmx_dprintf("PCIe: ERROR: cvmx_pcie_rc_initialize() " + "called on port1, but port1 is " + "disabled\n"); + return -1; + } + } + + /* + * PCIe switch arbitration mode. '0' == fixed priority NPEI, + * PCIe0, then PCIe1. '1' == round robin. + */ + npei_ctl_status.s.arb = 1; + /* Allow up to 0x20 config retries */ + npei_ctl_status.s.cfg_rtry = 0x20; + /* + * CN52XX pass1.x has an errata where P0_NTAGS and P1_NTAGS + * don't reset. + */ + if (OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_X)) { + npei_ctl_status.s.p0_ntags = 0x20; + npei_ctl_status.s.p1_ntags = 0x20; + } + cvmx_write_csr(CVMX_PEXP_NPEI_CTL_STATUS, npei_ctl_status.u64); + + /* Bring the PCIe out of reset */ + if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_EBH5200) { + /* + * The EBH5200 board swapped the PCIe reset lines on + * the board. As a workaround for this bug, we bring + * both PCIe ports out of reset at the same time + * instead of on separate calls. So for port 0, we + * bring both out of reset and do nothing on port 1. + */ + if (pcie_port == 0) { + ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST); + /* + * After a chip reset the PCIe will also be in + * reset. If it isn't, most likely someone is + * trying to init it again without a proper + * PCIe reset. + */ + if (ciu_soft_prst.s.soft_prst == 0) { + /* Reset the ports */ + ciu_soft_prst.s.soft_prst = 1; + cvmx_write_csr(CVMX_CIU_SOFT_PRST, + ciu_soft_prst.u64); + ciu_soft_prst.u64 = + cvmx_read_csr(CVMX_CIU_SOFT_PRST1); + ciu_soft_prst.s.soft_prst = 1; + cvmx_write_csr(CVMX_CIU_SOFT_PRST1, + ciu_soft_prst.u64); + /* Wait until pcie resets the ports. */ + udelay(2000); + } + ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST1); + ciu_soft_prst.s.soft_prst = 0; + cvmx_write_csr(CVMX_CIU_SOFT_PRST1, ciu_soft_prst.u64); + ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST); + ciu_soft_prst.s.soft_prst = 0; + cvmx_write_csr(CVMX_CIU_SOFT_PRST, ciu_soft_prst.u64); + } + } else { + /* + * The normal case: The PCIe ports are completely + * separate and can be brought out of reset + * independently. + */ + if (pcie_port) + ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST1); + else + ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST); + /* + * After a chip reset the PCIe will also be in + * reset. If it isn't, most likely someone is trying + * to init it again without a proper PCIe reset. + */ + if (ciu_soft_prst.s.soft_prst == 0) { + /* Reset the port */ + ciu_soft_prst.s.soft_prst = 1; + if (pcie_port) + cvmx_write_csr(CVMX_CIU_SOFT_PRST1, + ciu_soft_prst.u64); + else + cvmx_write_csr(CVMX_CIU_SOFT_PRST, + ciu_soft_prst.u64); + /* Wait until pcie resets the ports. */ + udelay(2000); + } + if (pcie_port) { + ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST1); + ciu_soft_prst.s.soft_prst = 0; + cvmx_write_csr(CVMX_CIU_SOFT_PRST1, ciu_soft_prst.u64); + } else { + ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST); + ciu_soft_prst.s.soft_prst = 0; + cvmx_write_csr(CVMX_CIU_SOFT_PRST, ciu_soft_prst.u64); + } + } + + /* + * Wait for PCIe reset to complete. Due to errata PCIE-700, we + * don't poll PESCX_CTL_STATUS2[PCIERST], but simply wait a + * fixed number of cycles. + */ + cvmx_wait(400000); + + /* PESCX_BIST_STATUS2[PCLK_RUN] was missing on pass 1 of CN56XX and + CN52XX, so we only probe it on newer chips */ + if (!OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_X) + && !OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_X)) { + /* Clear PCLK_RUN so we can check if the clock is running */ + pescx_ctl_status2.u64 = + cvmx_read_csr(CVMX_PESCX_CTL_STATUS2(pcie_port)); + pescx_ctl_status2.s.pclk_run = 1; + cvmx_write_csr(CVMX_PESCX_CTL_STATUS2(pcie_port), + pescx_ctl_status2.u64); + /* + * Now that we cleared PCLK_RUN, wait for it to be set + * again telling us the clock is running. + */ + if (CVMX_WAIT_FOR_FIELD64(CVMX_PESCX_CTL_STATUS2(pcie_port), + union cvmx_pescx_ctl_status2, + pclk_run, ==, 1, 10000)) { + cvmx_dprintf("PCIe: Port %d isn't clocked, skipping.\n", + pcie_port); + return -1; + } + } + + /* + * Check and make sure PCIe came out of reset. If it doesn't + * the board probably hasn't wired the clocks up and the + * interface should be skipped. + */ + pescx_ctl_status2.u64 = + cvmx_read_csr(CVMX_PESCX_CTL_STATUS2(pcie_port)); + if (pescx_ctl_status2.s.pcierst) { + cvmx_dprintf("PCIe: Port %d stuck in reset, skipping.\n", + pcie_port); + return -1; + } + + /* + * Check BIST2 status. If any bits are set skip this interface. This + * is an attempt to catch PCIE-813 on pass 1 parts. + */ + pescx_bist_status2.u64 = + cvmx_read_csr(CVMX_PESCX_BIST_STATUS2(pcie_port)); + if (pescx_bist_status2.u64) { + cvmx_dprintf("PCIe: Port %d BIST2 failed. Most likely this " + "port isn't hooked up, skipping.\n", + pcie_port); + return -1; + } + + /* Check BIST status */ + pescx_bist_status.u64 = + cvmx_read_csr(CVMX_PESCX_BIST_STATUS(pcie_port)); + if (pescx_bist_status.u64) + cvmx_dprintf("PCIe: BIST FAILED for port %d (0x%016llx)\n", + pcie_port, CAST64(pescx_bist_status.u64)); + + /* Initialize the config space CSRs */ + __cvmx_pcie_rc_initialize_config_space(pcie_port); + + /* Bring the link up */ + if (__cvmx_pcie_rc_initialize_link(pcie_port)) { + cvmx_dprintf + ("PCIe: ERROR: cvmx_pcie_rc_initialize_link() failed\n"); + return -1; + } + + /* Store merge control (NPEI_MEM_ACCESS_CTL[TIMER,MAX_WORD]) */ + npei_mem_access_ctl.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_MEM_ACCESS_CTL); + /* Allow 16 words to combine */ + npei_mem_access_ctl.s.max_word = 0; + /* Wait up to 127 cycles for more data */ + npei_mem_access_ctl.s.timer = 127; + cvmx_write_csr(CVMX_PEXP_NPEI_MEM_ACCESS_CTL, npei_mem_access_ctl.u64); + + /* Setup Mem access SubDIDs */ + mem_access_subid.u64 = 0; + /* Port the request is sent to. */ + mem_access_subid.s.port = pcie_port; + /* Due to an errata on pass 1 chips, no merging is allowed. */ + mem_access_subid.s.nmerge = 1; + /* Endian-swap for Reads. */ + mem_access_subid.s.esr = 1; + /* Endian-swap for Writes. */ + mem_access_subid.s.esw = 1; + /* No Snoop for Reads. */ + mem_access_subid.s.nsr = 1; + /* No Snoop for Writes. */ + mem_access_subid.s.nsw = 1; + /* Disable Relaxed Ordering for Reads. */ + mem_access_subid.s.ror = 0; + /* Disable Relaxed Ordering for Writes. */ + mem_access_subid.s.row = 0; + /* PCIe Adddress Bits <63:34>. */ + mem_access_subid.s.ba = 0; + + /* + * Setup mem access 12-15 for port 0, 16-19 for port 1, + * supplying 36 bits of address space. + */ + for (i = 12 + pcie_port * 4; i < 16 + pcie_port * 4; i++) { + cvmx_write_csr(CVMX_PEXP_NPEI_MEM_ACCESS_SUBIDX(i), + mem_access_subid.u64); + /* Set each SUBID to extend the addressable range */ + mem_access_subid.s.ba += 1; + } + + /* + * Disable the peer to peer forwarding register. This must be + * setup by the OS after it enumerates the bus and assigns + * addresses to the PCIe busses. + */ + for (i = 0; i < 4; i++) { + cvmx_write_csr(CVMX_PESCX_P2P_BARX_START(i, pcie_port), -1); + cvmx_write_csr(CVMX_PESCX_P2P_BARX_END(i, pcie_port), -1); + } + + /* Set Octeon's BAR0 to decode 0-16KB. It overlaps with Bar2 */ + cvmx_write_csr(CVMX_PESCX_P2N_BAR0_START(pcie_port), 0); + + /* + * Disable Octeon's BAR1. It isn't needed in RC mode since + * BAR2 maps all of memory. BAR2 also maps 256MB-512MB into + * the 2nd 256MB of memory. + */ + cvmx_write_csr(CVMX_PESCX_P2N_BAR1_START(pcie_port), -1); + + /* + * Set Octeon's BAR2 to decode 0-2^39. Bar0 and Bar1 take + * precedence where they overlap. It also overlaps with the + * device addresses, so make sure the peer to peer forwarding + * is set right. + */ + cvmx_write_csr(CVMX_PESCX_P2N_BAR2_START(pcie_port), 0); + + /* + * Setup BAR2 attributes + * + * Relaxed Ordering (NPEI_CTL_PORTn[PTLP_RO,CTLP_RO, WAIT_COM]) + * - PTLP_RO,CTLP_RO should normally be set (except for debug). + * - WAIT_COM=0 will likely work for all applications. + * + * Load completion relaxed ordering (NPEI_CTL_PORTn[WAITL_COM]). + */ + if (pcie_port) { + union cvmx_npei_ctl_port1 npei_ctl_port; + npei_ctl_port.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_CTL_PORT1); + npei_ctl_port.s.bar2_enb = 1; + npei_ctl_port.s.bar2_esx = 1; + npei_ctl_port.s.bar2_cax = 0; + npei_ctl_port.s.ptlp_ro = 1; + npei_ctl_port.s.ctlp_ro = 1; + npei_ctl_port.s.wait_com = 0; + npei_ctl_port.s.waitl_com = 0; + cvmx_write_csr(CVMX_PEXP_NPEI_CTL_PORT1, npei_ctl_port.u64); + } else { + union cvmx_npei_ctl_port0 npei_ctl_port; + npei_ctl_port.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_CTL_PORT0); + npei_ctl_port.s.bar2_enb = 1; + npei_ctl_port.s.bar2_esx = 1; + npei_ctl_port.s.bar2_cax = 0; + npei_ctl_port.s.ptlp_ro = 1; + npei_ctl_port.s.ctlp_ro = 1; + npei_ctl_port.s.wait_com = 0; + npei_ctl_port.s.waitl_com = 0; + cvmx_write_csr(CVMX_PEXP_NPEI_CTL_PORT0, npei_ctl_port.u64); + } + return 0; +} + + +/* Above was cvmx-pcie.c, below original pcie.c */ + + +/** + * Map a PCI device to the appropriate interrupt line + * + * @dev: The Linux PCI device structure for the device to map + * @slot: The slot number for this device on __BUS 0__. Linux + * enumerates through all the bridges and figures out the + * slot on Bus 0 where this device eventually hooks to. + * @pin: The PCI interrupt pin read from the device, then swizzled + * as it goes through each bridge. + * Returns Interrupt number for the device + */ +int __init octeon_pcie_pcibios_map_irq(const struct pci_dev *dev, + u8 slot, u8 pin) +{ + /* + * The EBH5600 board with the PCI to PCIe bridge mistakenly + * wires the first slot for both device id 2 and interrupt + * A. According to the PCI spec, device id 2 should be C. The + * following kludge attempts to fix this. + */ + if (strstr(octeon_board_type_string(), "EBH5600") && + dev->bus && dev->bus->parent) { + /* + * Iterate all the way up the device chain and find + * the root bus. + */ + while (dev->bus && dev->bus->parent) + dev = to_pci_dev(dev->bus->bridge); + /* If the root bus is number 0 and the PEX 8114 is the + * root, assume we are behind the miswired bus. We + * need to correct the swizzle level by two. Yuck. + */ + if ((dev->bus->number == 0) && + (dev->vendor == 0x10b5) && (dev->device == 0x8114)) { + /* + * The pin field is one based, not zero. We + * need to swizzle it by minus two. + */ + pin = ((pin - 3) & 3) + 1; + } + } + /* + * The -1 is because pin starts with one, not zero. It might + * be that this equation needs to include the slot number, but + * I don't have hardware to check that against. + */ + return pin - 1 + OCTEON_IRQ_PCI_INT0; +} + +/** + * Read a value from configuration space + * + * @bus: + * @devfn: + * @reg: + * @size: + * @val: + * Returns + */ +static inline int octeon_pcie_read_config(int pcie_port, struct pci_bus *bus, + unsigned int devfn, int reg, int size, + u32 *val) +{ + union octeon_cvmemctl cvmmemctl; + union octeon_cvmemctl cvmmemctl_save; + int bus_number = bus->number; + + /* + * We need to force the bus number to be zero on the root + * bus. Linux numbers the 2nd root bus to start after all + * buses on root 0. + */ + if (bus->parent == NULL) + bus_number = 0; + + /* + * PCIe only has a single device connected to Octeon. It is + * always device ID 0. Don't bother doing reads for other + * device IDs on the first segment. + */ + if ((bus_number == 0) && (devfn >> 3 != 0)) + return PCIBIOS_FUNC_NOT_SUPPORTED; + + /* + * The following is a workaround for the CN57XX, CN56XX, + * CN55XX, and CN54XX errata with PCIe config reads from non + * existent devices. These chips will hang the PCIe link if a + * config read is performed that causes a UR response. + */ + if (OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1) || + OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_1)) { + /* + * For our EBH5600 board, port 0 has a bridge with two + * PCI-X slots. We need a new special checks to make + * sure we only probe valid stuff. The PCIe->PCI-X + * bridge only respondes to device ID 0, function + * 0-1 + */ + if ((bus_number == 0) && (devfn >= 2)) + return PCIBIOS_FUNC_NOT_SUPPORTED; + /* + * The PCI-X slots are device ID 2,3. Choose one of + * the below "if" blocks based on what is plugged into + * the board. + */ +#if 1 + /* Use this option if you aren't using either slot */ + if (bus_number == 1) + return PCIBIOS_FUNC_NOT_SUPPORTED; +#elif 0 + /* + * Use this option if you are using the first slot but + * not the second. + */ + if ((bus_number == 1) && (devfn >> 3 != 2)) + return PCIBIOS_FUNC_NOT_SUPPORTED; +#elif 0 + /* + * Use this option if you are using the second slot + * but not the first. + */ + if ((bus_number == 1) && (devfn >> 3 != 3)) + return PCIBIOS_FUNC_NOT_SUPPORTED; +#elif 0 + /* Use this opion if you are using both slots */ + if ((bus_number == 1) && + !((devfn == (2 << 3)) || (devfn == (3 << 3)))) + return PCIBIOS_FUNC_NOT_SUPPORTED; +#endif + + /* + * Shorten the DID timeout so bus errors for PCIe + * config reads from non existent devices happen + * faster. This allows us to continue booting even if + * the above "if" checks are wrong. Once one of these + * errors happens, the PCIe port is dead. + */ + cvmmemctl_save.u64 = __read_64bit_c0_register($11, 7); + cvmmemctl.u64 = cvmmemctl_save.u64; + cvmmemctl.s.didtto = 2; + __write_64bit_c0_register($11, 7, cvmmemctl.u64); + } + + switch (size) { + case 4: + *val = cvmx_pcie_config_read32(pcie_port, bus_number, + devfn >> 3, devfn & 0x7, reg); + break; + case 2: + *val = cvmx_pcie_config_read16(pcie_port, bus_number, + devfn >> 3, devfn & 0x7, reg); + break; + case 1: + *val = cvmx_pcie_config_read8(pcie_port, bus_number, devfn >> 3, + devfn & 0x7, reg); + break; + default: + return PCIBIOS_FUNC_NOT_SUPPORTED; + } + + if (OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1) || + OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_1)) + __write_64bit_c0_register($11, 7, cvmmemctl_save.u64); + return PCIBIOS_SUCCESSFUL; +} + +static int octeon_pcie0_read_config(struct pci_bus *bus, unsigned int devfn, + int reg, int size, u32 *val) +{ + return octeon_pcie_read_config(0, bus, devfn, reg, size, val); +} + +static int octeon_pcie1_read_config(struct pci_bus *bus, unsigned int devfn, + int reg, int size, u32 *val) +{ + return octeon_pcie_read_config(1, bus, devfn, reg, size, val); +} + + + +/** + * Write a value to PCI configuration space + * + * @bus: + * @devfn: + * @reg: + * @size: + * @val: + * Returns + */ +static inline int octeon_pcie_write_config(int pcie_port, struct pci_bus *bus, + unsigned int devfn, int reg, + int size, u32 val) +{ + int bus_number = bus->number; + /* + * We need to force the bus number to be zero on the root + * bus. Linux numbers the 2nd root bus to start after all + * busses on root 0. + */ + if (bus->parent == NULL) + bus_number = 0; + + switch (size) { + case 4: + cvmx_pcie_config_write32(pcie_port, bus_number, devfn >> 3, + devfn & 0x7, reg, val); + return PCIBIOS_SUCCESSFUL; + case 2: + cvmx_pcie_config_write16(pcie_port, bus_number, devfn >> 3, + devfn & 0x7, reg, val); + return PCIBIOS_SUCCESSFUL; + case 1: + cvmx_pcie_config_write8(pcie_port, bus_number, devfn >> 3, + devfn & 0x7, reg, val); + return PCIBIOS_SUCCESSFUL; + } +#if PCI_CONFIG_SPACE_DELAY + udelay(PCI_CONFIG_SPACE_DELAY); +#endif + return PCIBIOS_FUNC_NOT_SUPPORTED; +} + +static int octeon_pcie0_write_config(struct pci_bus *bus, unsigned int devfn, + int reg, int size, u32 val) +{ + return octeon_pcie_write_config(0, bus, devfn, reg, size, val); +} + +static int octeon_pcie1_write_config(struct pci_bus *bus, unsigned int devfn, + int reg, int size, u32 val) +{ + return octeon_pcie_write_config(1, bus, devfn, reg, size, val); +} + +static struct pci_ops octeon_pcie0_ops = { + octeon_pcie0_read_config, + octeon_pcie0_write_config, +}; + +static struct resource octeon_pcie0_mem_resource = { + .name = "Octeon PCIe0 MEM", + .flags = IORESOURCE_MEM, +}; + +static struct resource octeon_pcie0_io_resource = { + .name = "Octeon PCIe0 IO", + .flags = IORESOURCE_IO, +}; + +static struct pci_controller octeon_pcie0_controller = { + .pci_ops = &octeon_pcie0_ops, + .mem_resource = &octeon_pcie0_mem_resource, + .io_resource = &octeon_pcie0_io_resource, +}; + +static struct pci_ops octeon_pcie1_ops = { + octeon_pcie1_read_config, + octeon_pcie1_write_config, +}; + +static struct resource octeon_pcie1_mem_resource = { + .name = "Octeon PCIe1 MEM", + .flags = IORESOURCE_MEM, +}; + +static struct resource octeon_pcie1_io_resource = { + .name = "Octeon PCIe1 IO", + .flags = IORESOURCE_IO, +}; + +static struct pci_controller octeon_pcie1_controller = { + .pci_ops = &octeon_pcie1_ops, + .mem_resource = &octeon_pcie1_mem_resource, + .io_resource = &octeon_pcie1_io_resource, +}; + + +/** + * Initialize the Octeon PCIe controllers + * + * Returns + */ +static int __init octeon_pcie_setup(void) +{ + union cvmx_npei_ctl_status npei_ctl_status; + int result; + + /* These chips don't have PCIe */ + if (!octeon_has_feature(OCTEON_FEATURE_PCIE)) + return 0; + + /* Point pcibios_map_irq() to the PCIe version of it */ + octeon_pcibios_map_irq = octeon_pcie_pcibios_map_irq; + + /* Use the PCIe based DMA mappings */ + octeon_dma_bar_type = OCTEON_DMA_BAR_TYPE_PCIE; + + /* + * PCIe I/O range. It is based on port 0 but includes up until + * port 1's end. + */ + set_io_port_base(CVMX_ADD_IO_SEG(cvmx_pcie_get_io_base_address(0))); + ioport_resource.start = 0; + ioport_resource.end = + cvmx_pcie_get_io_base_address(1) - + cvmx_pcie_get_io_base_address(0) + cvmx_pcie_get_io_size(1) - 1; + + npei_ctl_status.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_CTL_STATUS); + if (npei_ctl_status.s.host_mode) { + pr_notice("PCIe: Initializing port 0\n"); + result = cvmx_pcie_rc_initialize(0); + if (result == 0) { + /* Memory offsets are physical addresses */ + octeon_pcie0_controller.mem_offset = + cvmx_pcie_get_mem_base_address(0); + /* IO offsets are Mips virtual addresses */ + octeon_pcie0_controller.io_map_base = + CVMX_ADD_IO_SEG(cvmx_pcie_get_io_base_address + (0)); + octeon_pcie0_controller.io_offset = 0; + /* + * To keep things similar to PCI, we start + * device addresses at the same place as PCI + * uisng big bar support. This normally + * translates to 4GB-256MB, which is the same + * as most x86 PCs. + */ + octeon_pcie0_controller.mem_resource->start = + cvmx_pcie_get_mem_base_address(0) + + (4ul << 30) - (OCTEON_PCI_BAR1_HOLE_SIZE << 20); + octeon_pcie0_controller.mem_resource->end = + cvmx_pcie_get_mem_base_address(0) + + cvmx_pcie_get_mem_size(0) - 1; + /* + * Ports must be above 16KB for the ISA bus + * filtering in the PCI-X to PCI bridge. + */ + octeon_pcie0_controller.io_resource->start = 4 << 10; + octeon_pcie0_controller.io_resource->end = + cvmx_pcie_get_io_size(0) - 1; + register_pci_controller(&octeon_pcie0_controller); + } + } else { + pr_notice("PCIe: Port 0 in endpoint mode, skipping.\n"); + } + + /* Skip the 2nd port on CN52XX if port 0 is in 4 lane mode */ + if (OCTEON_IS_MODEL(OCTEON_CN52XX)) { + union cvmx_npei_dbg_data npei_dbg_data; + npei_dbg_data.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_DBG_DATA); + if (npei_dbg_data.cn52xx.qlm0_link_width) + return 0; + } + + pr_notice("PCIe: Initializing port 1\n"); + result = cvmx_pcie_rc_initialize(1); + if (result == 0) { + /* Memory offsets are physical addresses */ + octeon_pcie1_controller.mem_offset = + cvmx_pcie_get_mem_base_address(1); + /* IO offsets are Mips virtual addresses */ + octeon_pcie1_controller.io_map_base = + CVMX_ADD_IO_SEG(cvmx_pcie_get_io_base_address(1)); + octeon_pcie1_controller.io_offset = + cvmx_pcie_get_io_base_address(1) - + cvmx_pcie_get_io_base_address(0); + /* + * To keep things similar to PCI, we start device + * addresses at the same place as PCI uisng big bar + * support. This normally translates to 4GB-256MB, + * which is the same as most x86 PCs. + */ + octeon_pcie1_controller.mem_resource->start = + cvmx_pcie_get_mem_base_address(1) + (4ul << 30) - + (OCTEON_PCI_BAR1_HOLE_SIZE << 20); + octeon_pcie1_controller.mem_resource->end = + cvmx_pcie_get_mem_base_address(1) + + cvmx_pcie_get_mem_size(1) - 1; + /* + * Ports must be above 16KB for the ISA bus filtering + * in the PCI-X to PCI bridge. + */ + octeon_pcie1_controller.io_resource->start = + cvmx_pcie_get_io_base_address(1) - + cvmx_pcie_get_io_base_address(0); + octeon_pcie1_controller.io_resource->end = + octeon_pcie1_controller.io_resource->start + + cvmx_pcie_get_io_size(1) - 1; + register_pci_controller(&octeon_pcie1_controller); + } + return 0; +} + +arch_initcall(octeon_pcie_setup); -- cgit v1.1 From baf922780251d12bc1c24c83df60c4c278abb745 Mon Sep 17 00:00:00 2001 From: Ralf Baechle <ralf@linux-mips.org> Date: Fri, 3 Jul 2009 07:11:15 +0100 Subject: MIPS: Fix CONFIG_FLATMEM version of pfn_valid() For systems which do not define PHYS_OFFSET as 0 pfn_valid() may falsely have returned 0 on most configurations. Bug introduced by commit 752fbeb2e3555c0d236e992f1195fd7ce30e728d (linux-mips.org) rsp. 6f284a2ce7b8bc49cb8455b1763357897a899abb (kernel.org) titled "[MIPS] FLATMEM: introduce PHYS_OFFSET." Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/include/asm/page.h | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h index dc0eaa7..96a14a4 100644 --- a/arch/mips/include/asm/page.h +++ b/arch/mips/include/asm/page.h @@ -165,7 +165,14 @@ typedef struct { unsigned long pgprot; } pgprot_t; #ifdef CONFIG_FLATMEM -#define pfn_valid(pfn) ((pfn) >= ARCH_PFN_OFFSET && (pfn) < max_mapnr) +#define pfn_valid(pfn) \ +({ \ + unsigned long __pfn = (pfn); \ + /* avoid <linux/bootmem.h> include hell */ \ + extern unsigned long min_low_pfn; \ + \ + __pfn >= min_low_pfn && __pfn < max_mapnr; \ +}) #elif defined(CONFIG_SPARSEMEM) -- cgit v1.1 From 1fde902d52ee13ab9fab155bbae757fdf7daf0c1 Mon Sep 17 00:00:00 2001 From: Ingo Molnar <mingo@elte.hu> Date: Fri, 3 Jul 2009 17:28:57 +0200 Subject: x86: atomic64: Export APIs to modules atomic64_t primitives are used by a handful of drivers, so export the APIs consistently. These were inlined before. Also mark atomic64_32.o a core object, so that the symbols are available even if not linked to core kernel pieces. Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: David Howells <dhowells@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> LKML-Reference: <tip-05118ab8859492ac9ddda0154cf90e37b0a4a0b0@git.kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/lib/Makefile | 2 +- arch/x86/lib/atomic64_32.c | 18 ++++++++++++++++++ 2 files changed, 19 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile index c3c657c..07c3189 100644 --- a/arch/x86/lib/Makefile +++ b/arch/x86/lib/Makefile @@ -10,7 +10,7 @@ lib-y += usercopy_$(BITS).o getuser.o putuser.o lib-y += memcpy_$(BITS).o ifeq ($(CONFIG_X86_32),y) - lib-y += atomic64_32.o + obj-y += atomic64_32.o lib-y += checksum_32.o lib-y += strstr_32.o lib-y += semaphore_32.o string_32.o diff --git a/arch/x86/lib/atomic64_32.c b/arch/x86/lib/atomic64_32.c index cd11803..6722a09 100644 --- a/arch/x86/lib/atomic64_32.c +++ b/arch/x86/lib/atomic64_32.c @@ -1,5 +1,7 @@ #include <linux/compiler.h> +#include <linux/module.h> #include <linux/types.h> + #include <asm/processor.h> #include <asm/cmpxchg.h> #include <asm/atomic.h> @@ -21,6 +23,7 @@ u64 atomic64_cmpxchg(atomic64_t *ptr, u64 old_val, u64 new_val) { return cmpxchg8b(&ptr->counter, old_val, new_val); } +EXPORT_SYMBOL(atomic64_cmpxchg); /** * atomic64_xchg - xchg atomic64 variable @@ -41,6 +44,7 @@ u64 atomic64_xchg(atomic64_t *ptr, u64 new_val) return old_val; } +EXPORT_SYMBOL(atomic64_xchg); /** * atomic64_set - set atomic64 variable @@ -53,6 +57,7 @@ void atomic64_set(atomic64_t *ptr, u64 new_val) { atomic64_xchg(ptr, new_val); } +EXPORT_SYMBOL(atomic64_read); /** * atomic64_read - read atomic64 variable @@ -74,6 +79,7 @@ u64 atomic64_read(atomic64_t *ptr) return res; } +EXPORT_SYMBOL(atomic64_read); /** * atomic64_add_return - add and return @@ -103,21 +109,25 @@ noinline u64 atomic64_add_return(u64 delta, atomic64_t *ptr) return new_val; } +EXPORT_SYMBOL(atomic64_add_return); u64 atomic64_sub_return(u64 delta, atomic64_t *ptr) { return atomic64_add_return(-delta, ptr); } +EXPORT_SYMBOL(atomic64_sub_return); u64 atomic64_inc_return(atomic64_t *ptr) { return atomic64_add_return(1, ptr); } +EXPORT_SYMBOL(atomic64_inc_return); u64 atomic64_dec_return(atomic64_t *ptr) { return atomic64_sub_return(1, ptr); } +EXPORT_SYMBOL(atomic64_dec_return); /** * atomic64_add - add integer to atomic64 variable @@ -130,6 +140,7 @@ void atomic64_add(u64 delta, atomic64_t *ptr) { atomic64_add_return(delta, ptr); } +EXPORT_SYMBOL(atomic64_add); /** * atomic64_sub - subtract the atomic64 variable @@ -142,6 +153,7 @@ void atomic64_sub(u64 delta, atomic64_t *ptr) { atomic64_add(-delta, ptr); } +EXPORT_SYMBOL(atomic64_sub); /** * atomic64_sub_and_test - subtract value from variable and test result @@ -158,6 +170,7 @@ int atomic64_sub_and_test(u64 delta, atomic64_t *ptr) return old_val == 0; } +EXPORT_SYMBOL(atomic64_sub_and_test); /** * atomic64_inc - increment atomic64 variable @@ -169,6 +182,7 @@ void atomic64_inc(atomic64_t *ptr) { atomic64_add(1, ptr); } +EXPORT_SYMBOL(atomic64_inc); /** * atomic64_dec - decrement atomic64 variable @@ -180,6 +194,7 @@ void atomic64_dec(atomic64_t *ptr) { atomic64_sub(1, ptr); } +EXPORT_SYMBOL(atomic64_dec); /** * atomic64_dec_and_test - decrement and test @@ -193,6 +208,7 @@ int atomic64_dec_and_test(atomic64_t *ptr) { return atomic64_sub_and_test(1, ptr); } +EXPORT_SYMBOL(atomic64_dec_and_test); /** * atomic64_inc_and_test - increment and test @@ -206,6 +222,7 @@ int atomic64_inc_and_test(atomic64_t *ptr) { return atomic64_sub_and_test(-1, ptr); } +EXPORT_SYMBOL(atomic64_inc_and_test); /** * atomic64_add_negative - add and test if negative @@ -222,3 +239,4 @@ int atomic64_add_negative(u64 delta, atomic64_t *ptr) return old_val < 0; } +EXPORT_SYMBOL(atomic64_add_negative); -- cgit v1.1 From 3a8d1788b37435baf6c296f4ea8beb4fa4955f44 Mon Sep 17 00:00:00 2001 From: Ingo Molnar <mingo@elte.hu> Date: Fri, 3 Jul 2009 19:56:36 +0200 Subject: x86: atomic64: Improve atomic64_xchg() Remove the read-first logic from atomic64_xchg() and simplify the loop. This function was the last user of __atomic64_read() - remove it. Also, change the 'real_val' assumption from the somewhat quirky 1ULL << 32 value to the (just as arbitrary, but simpler) value of 0. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: David Howells <dhowells@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> LKML-Reference: <tip-05118ab8859492ac9ddda0154cf90e37b0a4a0b0@git.kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/include/asm/atomic_32.h | 9 --------- arch/x86/lib/atomic64_32.c | 21 +++++++++++++++------ 2 files changed, 15 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/atomic_32.h b/arch/x86/include/asm/atomic_32.h index aa045de..d7c8849 100644 --- a/arch/x86/include/asm/atomic_32.h +++ b/arch/x86/include/asm/atomic_32.h @@ -268,15 +268,6 @@ typedef struct { #define ATOMIC64_INIT(val) { (val) } -/** - * atomic64_read - read atomic64 variable - * @ptr: pointer of type atomic64_t - * - * Atomically reads the value of @v. - * Doesn't imply a read memory barrier. - */ -#define __atomic64_read(ptr) ((ptr)->counter) - extern u64 atomic64_cmpxchg(atomic64_t *ptr, u64 old_val, u64 new_val); /** diff --git a/arch/x86/lib/atomic64_32.c b/arch/x86/lib/atomic64_32.c index 6722a09..a804f96 100644 --- a/arch/x86/lib/atomic64_32.c +++ b/arch/x86/lib/atomic64_32.c @@ -33,14 +33,23 @@ EXPORT_SYMBOL(atomic64_cmpxchg); * Atomically xchgs the value of @ptr to @new_val and returns * the old value. */ - u64 atomic64_xchg(atomic64_t *ptr, u64 new_val) { - u64 old_val; + /* + * Try first with a (possibly incorrect) assumption about + * what we have there. We'll do two loops most likely, + * but we'll get an ownership MESI transaction straight away + * instead of a read transaction followed by a + * flush-for-ownership transaction: + */ + u64 old_val, real_val = 0; do { - old_val = __atomic64_read(ptr); - } while (atomic64_cmpxchg(ptr, old_val, new_val) != old_val); + old_val = real_val; + + real_val = atomic64_cmpxchg(ptr, old_val, new_val); + + } while (real_val != old_val); return old_val; } @@ -91,13 +100,13 @@ EXPORT_SYMBOL(atomic64_read); noinline u64 atomic64_add_return(u64 delta, atomic64_t *ptr) { /* - * Try first with a (probably incorrect) assumption about + * Try first with a (possibly incorrect) assumption about * what we have there. We'll do two loops most likely, * but we'll get an ownership MESI transaction straight away * instead of a read transaction followed by a * flush-for-ownership transaction: */ - u64 old_val, new_val, real_val = 1ULL << 32; + u64 old_val, new_val, real_val = 0; do { old_val = real_val; -- cgit v1.1 From ddf9a003d32f720805ac30bcc15755e9289073de Mon Sep 17 00:00:00 2001 From: Ingo Molnar <mingo@elte.hu> Date: Fri, 3 Jul 2009 20:11:30 +0200 Subject: x86: atomic64: Clean up atomic64_sub_and_test() and atomic64_add_negative() Linus noticed that the variable name 'old_val' is confusingly named in these functions - the correct naming is 'new_val'. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: David Howells <dhowells@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> LKML-Reference: <alpine.LFD.2.01.0907030942260.3210@localhost.localdomain> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/lib/atomic64_32.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/x86/lib/atomic64_32.c b/arch/x86/lib/atomic64_32.c index a804f96..1d98c9e 100644 --- a/arch/x86/lib/atomic64_32.c +++ b/arch/x86/lib/atomic64_32.c @@ -175,9 +175,9 @@ EXPORT_SYMBOL(atomic64_sub); */ int atomic64_sub_and_test(u64 delta, atomic64_t *ptr) { - u64 old_val = atomic64_sub_return(delta, ptr); + u64 new_val = atomic64_sub_return(delta, ptr); - return old_val == 0; + return new_val == 0; } EXPORT_SYMBOL(atomic64_sub_and_test); @@ -244,8 +244,8 @@ EXPORT_SYMBOL(atomic64_inc_and_test); */ int atomic64_add_negative(u64 delta, atomic64_t *ptr) { - long long old_val = atomic64_add_return(delta, ptr); + s64 new_val = atomic64_add_return(delta, ptr); - return old_val < 0; + return new_val < 0; } EXPORT_SYMBOL(atomic64_add_negative); -- cgit v1.1 From a79f0da80a508448434476b77f9d3d1a469eab67 Mon Sep 17 00:00:00 2001 From: Eric Dumazet <eric.dumazet@gmail.com> Date: Fri, 3 Jul 2009 16:50:10 +0200 Subject: x86: atomic64: Inline atomic64_read() again Now atomic64_read() is light weight (no register pressure and small icache), we can inline it again. Also use "=&A" constraint instead of "+A" to avoid warning about unitialized 'res' variable. (gcc had to force 0 in eax/edx) $ size vmlinux.prev vmlinux.after text data bss dec hex filename 4908667 451676 1684868 7045211 6b805b vmlinux.prev 4908651 451676 1684868 7045195 6b804b vmlinux.after Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: David Howells <dhowells@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> LKML-Reference: <4A4E1AA2.30002@gmail.com> [ Also fix typo in atomic64_set() export ] Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/include/asm/atomic_32.h | 22 ++++++++++++++++++++++ arch/x86/lib/atomic64_32.c | 23 +---------------------- 2 files changed, 23 insertions(+), 22 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/atomic_32.h b/arch/x86/include/asm/atomic_32.h index d7c8849..dc5a667 100644 --- a/arch/x86/include/asm/atomic_32.h +++ b/arch/x86/include/asm/atomic_32.h @@ -295,6 +295,28 @@ extern void atomic64_set(atomic64_t *ptr, u64 new_val); * * Atomically reads the value of @ptr and returns it. */ +static inline u64 atomic64_read(atomic64_t *ptr) +{ + u64 res; + + /* + * Note, we inline this atomic64_t primitive because + * it only clobbers EAX/EDX and leaves the others + * untouched. We also (somewhat subtly) rely on the + * fact that cmpxchg8b returns the current 64-bit value + * of the memory location we are touching: + */ + asm volatile( + "mov %%ebx, %%eax\n\t" + "mov %%ecx, %%edx\n\t" + LOCK_PREFIX "cmpxchg8b %1\n" + : "=&A" (res) + : "m" (*ptr) + ); + + return res; +} + extern u64 atomic64_read(atomic64_t *ptr); /** diff --git a/arch/x86/lib/atomic64_32.c b/arch/x86/lib/atomic64_32.c index 1d98c9e..824fa0b 100644 --- a/arch/x86/lib/atomic64_32.c +++ b/arch/x86/lib/atomic64_32.c @@ -66,31 +66,10 @@ void atomic64_set(atomic64_t *ptr, u64 new_val) { atomic64_xchg(ptr, new_val); } -EXPORT_SYMBOL(atomic64_read); +EXPORT_SYMBOL(atomic64_set); /** - * atomic64_read - read atomic64 variable - * @ptr: pointer to type atomic64_t - * - * Atomically reads the value of @ptr and returns it. - */ -u64 atomic64_read(atomic64_t *ptr) -{ - u64 res; - - asm volatile( - "mov %%ebx, %%eax\n\t" - "mov %%ecx, %%edx\n\t" - LOCK_PREFIX "cmpxchg8b %1\n" - : "+A" (res) - : "m" (*ptr) - ); - - return res; -} EXPORT_SYMBOL(atomic64_read); - -/** * atomic64_add_return - add and return * @delta: integer value to add * @ptr: pointer to type atomic64_t -- cgit v1.1 From 62edf5dc4a524e4cb525e6020b955a1ad593d9ba Mon Sep 17 00:00:00 2001 From: David Woodhouse <David.Woodhouse@intel.com> Date: Sat, 4 Jul 2009 10:59:46 +0100 Subject: intel-iommu: Restore DMAR_BROKEN_GFX_WA option for broken graphics drivers We need to give people a little more time to fix the broken drivers. Re-introduce this, but tied in properly with the 'iommu=pt' support this time. Change the config option name and make it default to 'no' too. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> --- arch/x86/Kconfig | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch') diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index c07f722..738bdc6 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -1913,6 +1913,18 @@ config DMAR_DEFAULT_ON recommended you say N here while the DMAR code remains experimental. +config DMAR_BROKEN_GFX_WA + def_bool n + prompt "Workaround broken graphics drivers (going away soon)" + depends on DMAR + ---help--- + Current Graphics drivers tend to use physical address + for DMA and avoid using DMA APIs. Setting this config + option permits the IOMMU driver to set a unity map for + all the OS-visible memory. Hence the driver can continue + to use physical addresses for DMA, at least until this + option is removed in the 2.6.32 kernel. + config DMAR_FLOPPY_WA def_bool y depends on DMAR -- cgit v1.1 From 9731f4a202f29ff402ea2ddad7ff6f3a559c0c82 Mon Sep 17 00:00:00 2001 From: Magnus Damm <damm@igel.co.jp> Date: Fri, 3 Jul 2009 09:40:03 +0000 Subject: sh: add r8a66597 usb0 host to the se7724 board Add USB host support for port CN27 on the Solution Engine 7724 board. The r8a66597-hcd driver is hooked up as a platform device and some registers are configured to enable the USB host function. The hardware driving the USB port is the on-chip USB0 block in the sh7724 processor configured as USB host controller. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/boards/mach-se/7724/setup.c | 38 +++++++++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) (limited to 'arch') diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c index c050a8d..8fed45a 100644 --- a/arch/sh/boards/mach-se/7724/setup.c +++ b/arch/sh/boards/mach-se/7724/setup.c @@ -19,6 +19,7 @@ #include <linux/smc91x.h> #include <linux/gpio.h> #include <linux/input.h> +#include <linux/usb/r8a66597.h> #include <video/sh_mobile_lcdc.h> #include <media/sh_mobile_ceu.h> #include <asm/io.h> @@ -302,6 +303,34 @@ static struct platform_device sh_eth_device = { .resource = sh_eth_resources, }; +static struct r8a66597_platdata sh7724_usb0_host_data = { +}; + +static struct resource sh7724_usb0_host_resources[] = { + [0] = { + .start = 0xa4d80000, + .end = 0xa4d800ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 65, + .end = 65, + .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW, + }, +}; + +static struct platform_device sh7724_usb0_host_device = { + .name = "r8a66597_hcd", + .id = 0, + .dev = { + .dma_mask = NULL, /* not use dma */ + .coherent_dma_mask = 0xffffffff, + .platform_data = &sh7724_usb0_host_data, + }, + .num_resources = ARRAY_SIZE(sh7724_usb0_host_resources), + .resource = sh7724_usb0_host_resources, +}; + static struct platform_device *ms7724se_devices[] __initdata = { &heartbeat_device, &smc91x_eth_device, @@ -311,6 +340,7 @@ static struct platform_device *ms7724se_devices[] __initdata = { &ceu1_device, &keysc_device, &sh_eth_device, + &sh7724_usb0_host_device, }; #define EEPROM_OP 0xBA206000 @@ -364,6 +394,7 @@ static void __init sh_eth_init(void) #define SW4140 0xBA201000 #define FPGA_OUT 0xBA200400 #define PORT_HIZA 0xA4050158 +#define PORT_MSELCRB 0xA4050182 #define SW41_A 0x0100 #define SW41_B 0x0200 @@ -373,6 +404,7 @@ static void __init sh_eth_init(void) #define SW41_F 0x2000 #define SW41_G 0x4000 #define SW41_H 0x8000 + static int __init devices_setup(void) { u16 sw = ctrl_inw(SW4140); /* select camera, monitor */ @@ -385,6 +417,12 @@ static int __init devices_setup(void) (1 << 14)), /* RMII */ FPGA_OUT); + /* turn on USB clocks, use external clock */ + ctrl_outw((ctrl_inw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB); + + /* enable USB0 port */ + ctrl_outw(0x0600, 0xa40501d4); + /* enable IRQ 0,1,2 */ gpio_request(GPIO_FN_INTC_IRQ0, NULL); gpio_request(GPIO_FN_INTC_IRQ1, NULL); -- cgit v1.1 From febe04de3be4bf66f9339d8847db2806d99fd164 Mon Sep 17 00:00:00 2001 From: Akinobu Mita <akinobu.mita@gmail.com> Date: Wed, 1 Jul 2009 11:13:07 +0900 Subject: x86: fix usage of bios intcall() Some intcall() misuses the input biosregs as output in cf06de7b9cdd3efee7a59dced1977b3c21d43732 This fixes the problem vga=ask boot option doesn't show enough modes. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> LKML-Reference: <20090701021307.GA3127@localhost.localdomain> Signed-off-by: H. Peter Anvin <hpa@zytor.com> --- arch/x86/boot/video-bios.c | 3 +-- arch/x86/boot/video-vesa.c | 4 ++-- 2 files changed, 3 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/x86/boot/video-bios.c b/arch/x86/boot/video-bios.c index d660be4..49e0c18 100644 --- a/arch/x86/boot/video-bios.c +++ b/arch/x86/boot/video-bios.c @@ -37,14 +37,13 @@ static int set_bios_mode(u8 mode) ireg.al = mode; /* AH=0x00 Set Video Mode */ intcall(0x10, &ireg, NULL); - ireg.ah = 0x0f; /* Get Current Video Mode */ intcall(0x10, &ireg, &oreg); do_restore = 1; /* Assume video contents were lost */ /* Not all BIOSes are clean with the top bit */ - new_mode = ireg.al & 0x7f; + new_mode = oreg.al & 0x7f; if (new_mode == mode) return 0; /* Mode change OK */ diff --git a/arch/x86/boot/video-vesa.c b/arch/x86/boot/video-vesa.c index c700147..275dd17 100644 --- a/arch/x86/boot/video-vesa.c +++ b/arch/x86/boot/video-vesa.c @@ -45,7 +45,7 @@ static int vesa_probe(void) ireg.di = (size_t)&vginfo; intcall(0x10, &ireg, &oreg); - if (ireg.ax != 0x004f || + if (oreg.ax != 0x004f || vginfo.signature != VESA_MAGIC || vginfo.version < 0x0102) return 0; /* Not present */ @@ -70,7 +70,7 @@ static int vesa_probe(void) ireg.di = (size_t)&vminfo; intcall(0x10, &ireg, &oreg); - if (ireg.ax != 0x004f) + if (oreg.ax != 0x004f) continue; if ((vminfo.mode_attr & 0x15) == 0x05) { -- cgit v1.1 From 7c3a742a86055df1d18aac25bb8652735b3491ef Mon Sep 17 00:00:00 2001 From: Sean MacLennan <smaclennan@pikatech.com> Date: Tue, 16 Jun 2009 05:24:35 +0000 Subject: powerpc/44x: Update Warp defconfig * Enable GPIO LEDS and LED triggers * Move to SLUB * Enable HOTPLUG * Enable timestamps on printks * Enable UBIFS * Enable in-kernel config Signed-off-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> --- arch/powerpc/configs/44x/warp_defconfig | 200 +++++++++++++++++++++++++------- 1 file changed, 157 insertions(+), 43 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/configs/44x/warp_defconfig b/arch/powerpc/configs/44x/warp_defconfig index 3b77f09..787635f 100644 --- a/arch/powerpc/configs/44x/warp_defconfig +++ b/arch/powerpc/configs/44x/warp_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Fri Jan 23 07:57:16 2009 +# Linux kernel version: 2.6.30 +# Tue Jun 9 23:35:36 2009 # # CONFIG_PPC64 is not set @@ -41,6 +41,7 @@ CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y CONFIG_EARLY_PRINTK=y @@ -53,10 +54,12 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set CONFIG_PPC_DCR_NATIVE=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_PPC_DCR=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -74,7 +77,17 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y @@ -82,27 +95,29 @@ CONFIG_FAIR_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_HOTPLUG is not set +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -110,10 +125,13 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set +CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -121,6 +139,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -133,7 +152,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -149,11 +167,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -173,10 +186,11 @@ CONFIG_WARP=y # CONFIG_ARCHES is not set # CONFIG_CANYONLANDS is not set # CONFIG_GLACIER is not set +# CONFIG_REDWOOD is not set # CONFIG_YOSEMITE is not set # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set # CONFIG_PPC44x_SIMPLE is not set -# CONFIG_PPC4xx_GPIO is not set +CONFIG_PPC4xx_GPIO=y CONFIG_440EP=y CONFIG_IBM440EP_ERR42=y # CONFIG_IPIC is not set @@ -235,9 +249,13 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_STDBINUTILS=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y @@ -256,6 +274,7 @@ CONFIG_PPC_PCI_CHOICE=y # CONFIG_PCI_DOMAINS is not set # CONFIG_PCI_SYSCALL is not set # CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set # CONFIG_HAS_RAPIDIO is not set # @@ -271,14 +290,12 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -353,6 +370,7 @@ CONFIG_VLAN_8021Q=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -365,7 +383,6 @@ CONFIG_VLAN_8021Q=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set @@ -378,8 +395,12 @@ CONFIG_VLAN_8021Q=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_STANDALONE is not set CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -471,13 +492,21 @@ CONFIG_MTD_NAND_NDFC=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images # -# CONFIG_MTD_UBI is not set +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_RESERVE=1 +# CONFIG_MTD_UBI_GLUEBI is not set + +# +# UBI debugging options +# +# CONFIG_MTD_UBI_DEBUG is not set CONFIG_OF_DEVICE=y +CONFIG_OF_GPIO=y CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y @@ -495,10 +524,17 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_XILINX_SYSACE is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +CONFIG_EEPROM_AT24=y +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -529,7 +565,7 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set -CONFIG_SCSI_WAIT_SCAN=m +# CONFIG_SCSI_WAIT_SCAN is not set # # SCSI Transports @@ -541,10 +577,12 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -554,6 +592,8 @@ CONFIG_NETDEVICES=y # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set CONFIG_IBM_NEW_EMAC=y CONFIG_IBM_NEW_EMAC_RXB=128 CONFIG_IBM_NEW_EMAC_TXB=64 @@ -577,7 +617,6 @@ CONFIG_IBM_NEW_EMAC_ZMII=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -646,6 +685,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set # CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set @@ -663,6 +703,7 @@ CONFIG_I2C_HELPER_AUTO=y # # I2C system bus drivers (mostly embedded / system-on-chip) # +# CONFIG_I2C_GPIO is not set CONFIG_I2C_IBM_IIC=y # CONFIG_I2C_MPC is not set # CONFIG_I2C_OCORES is not set @@ -685,12 +726,9 @@ CONFIG_I2C_IBM_IIC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -CONFIG_EEPROM_AT24=y -CONFIG_EEPROM_LEGACY=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -699,7 +737,30 @@ CONFIG_EEPROM_LEGACY=y # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -# CONFIG_GPIOLIB is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# +# CONFIG_GPIO_XILINX is not set + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -721,6 +782,7 @@ CONFIG_SENSORS_AD7414=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -735,11 +797,15 @@ CONFIG_SENSORS_AD7414=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set @@ -785,6 +851,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set @@ -870,11 +937,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -915,7 +982,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -929,6 +995,8 @@ CONFIG_USB_STORAGE=y # # OTG and related infrastructure # +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set # CONFIG_MMC_UNSAFE_RESUME is not set @@ -946,6 +1014,7 @@ CONFIG_MMC_BLOCK_BOUNCE=y # # CONFIG_MMC_SDHCI is not set # CONFIG_MMC_WBSD is not set +CONFIG_MMC_PIKASD=y # CONFIG_MEMSTICK is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y @@ -953,16 +1022,31 @@ CONFIG_LEDS_CLASS=y # # LED drivers # +CONFIG_LEDS_GPIO=y +# CONFIG_LEDS_GPIO_PLATFORM is not set +CONFIG_LEDS_GPIO_OF=y +# CONFIG_LEDS_LP5521 is not set # CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_BD2802 is not set # # LED Triggers # -# CONFIG_LEDS_TRIGGERS is not set +CONFIG_LEDS_TRIGGERS=y +# CONFIG_LEDS_TRIGGER_TIMER is not set +# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +# CONFIG_LEDS_TRIGGER_GPIO is not set +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y + +# +# iptables trigger is under Netfilter config (LED target) +# # CONFIG_ACCESSIBILITY is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -973,6 +1057,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -993,6 +1078,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -1039,6 +1129,12 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +CONFIG_UBIFS_FS=y +# CONFIG_UBIFS_FS_XATTR is not set +# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_ZLIB=y +# CONFIG_UBIFS_FS_DEBUG is not set CONFIG_CRAMFS=y # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1049,6 +1145,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1060,7 +1157,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1115,6 +1211,7 @@ CONFIG_NLS_ISO8859_15=y # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1122,7 +1219,7 @@ CONFIG_NLS_UTF8=y CONFIG_BITREVERSE=y CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=y -# CONFIG_CRC16 is not set +CONFIG_CRC16=y CONFIG_CRC_T10DIF=y # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y @@ -1130,16 +1227,19 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking # -# CONFIG_PRINTK_TIME is not set +CONFIG_PRINTK_TIME=y CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 @@ -1152,11 +1252,15 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set -# CONFIG_DEBUG_SLAB is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1180,9 +1284,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1190,24 +1297,27 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set CONFIG_IRQSTACKS=y # CONFIG_VIRQ_DEBUG is not set -CONFIG_BDI_SWITCH=y +# CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -1223,6 +1333,8 @@ CONFIG_CRYPTO=y # Crypto core or helper # # CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -1294,13 +1406,15 @@ CONFIG_CRYPTO=y # # Compression # -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_DEFLATE=y +# CONFIG_CRYPTO_ZLIB is not set +CONFIG_CRYPTO_LZO=y # # Random Number Generation # # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_PPC4XX is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set -- cgit v1.1 From ba703e1a7a0b32f740bcfba8e60ad193afa4e723 Mon Sep 17 00:00:00 2001 From: Sean MacLennan <smaclennan@pikatech.com> Date: Sun, 28 Jun 2009 11:22:51 +0000 Subject: powerpc/4xx: Have Warp take advantage of GPIO LEDs default-state = keep The GPIO LEDS driver now has a default state of "keep". Update the Warp DTS and platform file to take advantage of this new state. This removes the hardcoding of the two LEDs on the Warp. Signed-off-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> --- arch/powerpc/boot/dts/warp.dts | 3 ++- arch/powerpc/platforms/44x/warp.c | 16 ++++------------ 2 files changed, 6 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/boot/dts/warp.dts b/arch/powerpc/boot/dts/warp.dts index 01bfb56..31605ee 100644 --- a/arch/powerpc/boot/dts/warp.dts +++ b/arch/powerpc/boot/dts/warp.dts @@ -261,10 +261,11 @@ compatible = "gpio-leds"; green { gpios = <&GPIO1 0 0>; - default-state = "on"; + default-state = "keep"; }; red { gpios = <&GPIO1 1 0>; + default-state = "keep"; }; }; diff --git a/arch/powerpc/platforms/44x/warp.c b/arch/powerpc/platforms/44x/warp.c index 0362c88..9916b39 100644 --- a/arch/powerpc/platforms/44x/warp.c +++ b/arch/powerpc/platforms/44x/warp.c @@ -64,8 +64,6 @@ define_machine(warp) { }; -static u32 post_info; - static int __init warp_post_info(void) { struct device_node *np; @@ -87,10 +85,9 @@ static int __init warp_post_info(void) iounmap(fpga); - if (post1 || post2) { + if (post1 || post2) printk(KERN_INFO "Warp POST %08x %08x\n", post1, post2); - post_info = 1; - } else + else printk(KERN_INFO "Warp POST OK\n"); return 0; @@ -179,15 +176,10 @@ static int pika_setup_leds(void) } for_each_child_of_node(np, child) - if (strcmp(child->name, "green") == 0) { + if (strcmp(child->name, "green") == 0) green_led = of_get_gpio(child, 0); - /* Turn back on the green LED */ - gpio_set_value(green_led, 1); - } else if (strcmp(child->name, "red") == 0) { + else if (strcmp(child->name, "red") == 0) red_led = of_get_gpio(child, 0); - /* Set based on post */ - gpio_set_value(red_led, post_info); - } of_node_put(np); -- cgit v1.1 From a22ebd069d5b533392e9bef77b73147a2f82b30b Mon Sep 17 00:00:00 2001 From: Josh Boyer <jwboyer@linux.vnet.ibm.com> Date: Sun, 5 Jul 2009 10:02:15 -0400 Subject: powerpc/44x: Fix build error with -Werror for Warp platform With -Werror enabled during the build, the warp.c file fails to build due to the temp_isr function not containing a return statement. This fixes the build error and documents that the function never returns. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> --- arch/powerpc/platforms/44x/warp.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/platforms/44x/warp.c b/arch/powerpc/platforms/44x/warp.c index 9916b39..e5c1b09 100644 --- a/arch/powerpc/platforms/44x/warp.c +++ b/arch/powerpc/platforms/44x/warp.c @@ -163,6 +163,9 @@ static irqreturn_t temp_isr(int irq, void *context) value ^= 1; mdelay(500); } + + /* Not reached */ + return IRQ_HANDLED; } static int pika_setup_leds(void) -- cgit v1.1 From ba9b42e4ff5eb68f9c946378229d7e45299d7151 Mon Sep 17 00:00:00 2001 From: Russell King <rmk@dyn-67.arm.linux.org.uk> Date: Sun, 5 Jul 2009 10:50:37 +0100 Subject: [ARM] export __cpu_flush_dcache_page Now required for libsas: Kernel: arch/arm/boot/Image is ready Kernel: arch/arm/boot/zImage is ready Building modules, stage 2. MODPOST 1096 modules ERROR: "xscale_flush_kern_dcache_page" [drivers/scsi/libsas/libsas.ko] undefined! Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> --- arch/arm/mm/proc-syms.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mm/proc-syms.c b/arch/arm/mm/proc-syms.c index 195e48e..ac5c800 100644 --- a/arch/arm/mm/proc-syms.c +++ b/arch/arm/mm/proc-syms.c @@ -27,6 +27,7 @@ EXPORT_SYMBOL(__cpuc_flush_kern_all); EXPORT_SYMBOL(__cpuc_flush_user_all); EXPORT_SYMBOL(__cpuc_flush_user_range); EXPORT_SYMBOL(__cpuc_coherent_kern_range); +EXPORT_SYMBOL(__cpuc_flush_dcache_page); EXPORT_SYMBOL(dmac_inv_range); /* because of flush_ioremap_region() */ #else EXPORT_SYMBOL(cpu_cache); -- cgit v1.1 From fb93a1c75eb646fde35985e9af23da936775ae52 Mon Sep 17 00:00:00 2001 From: Russell King <rmk@dyn-67.arm.linux.org.uk> Date: Sun, 5 Jul 2009 11:30:15 +0100 Subject: [ARM] pgtable: swp pte layout documentation, definitions, and check Document the layout of our swp PTE entries, adding definitions for the bit masks/shifts/sizes, and implement MAX_SWAPFILES_CHECK() such that we fail to build if we are unable to properly encode the swp type field. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> --- arch/arm/include/asm/pgtable.h | 30 +++++++++++++++++++++++++----- 1 file changed, 25 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index 1cd2d64..c1d9793 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -384,16 +384,36 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; -/* Encode and decode a swap entry. +/* + * Encode and decode a swap entry. Swap entries are stored in the Linux + * page tables as follows: + * + * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 + * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 + * <--------------- offset --------------------> <--- type --> 0 0 * - * We support up to 32GB of swap on 4k machines + * This gives us up to 127 swap files and 32GB per swap file. Note that + * the offset field is always non-zero. */ -#define __swp_type(x) (((x).val >> 2) & 0x7f) -#define __swp_offset(x) ((x).val >> 9) -#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << 2) | ((offset) << 9) }) +#define __SWP_TYPE_SHIFT 2 +#define __SWP_TYPE_BITS 7 +#define __SWP_TYPE_MASK ((1 << __SWP_TYPE_BITS) - 1) +#define __SWP_OFFSET_SHIFT (__SWP_TYPE_BITS + __SWP_TYPE_SHIFT) + +#define __swp_type(x) (((x).val >> __SWP_TYPE_SHIFT) & __SWP_TYPE_MASK) +#define __swp_offset(x) ((x).val >> __SWP_OFFSET_SHIFT) +#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << __SWP_TYPE_SHIFT) | ((offset) << __SWP_OFFSET_SHIFT) }) + #define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) #define __swp_entry_to_pte(swp) ((pte_t) { (swp).val }) +/* + * It is an error for the kernel to have more swap files than we can + * encode in the PTEs. This ensures that we know when MAX_SWAPFILES + * is increased beyond what we presently support. + */ +#define MAX_SWAPFILES_CHECK() BUILD_BUG_ON(MAX_SWAPFILES_SHIFT > __SWP_TYPE_BITS) + /* Needs to be defined here and not in linux/mm.h, as it is arch dependent */ /* FIXME: this is not correct */ #define kern_addr_valid(addr) (1) -- cgit v1.1 From 65b1bfc13e8f50034187e339aa12b81cd6785bd5 Mon Sep 17 00:00:00 2001 From: Russell King <rmk@dyn-67.arm.linux.org.uk> Date: Sun, 5 Jul 2009 11:52:21 +0100 Subject: [ARM] pgtable: file pte layout documentation Document the layout of our file PTE entries. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> --- arch/arm/include/asm/pgtable.h | 23 ++++++++++++++--------- 1 file changed, 14 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index c1d9793..c433c6c 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -285,15 +285,6 @@ extern struct page *empty_zero_page; #define pte_young(pte) (pte_val(pte) & L_PTE_YOUNG) #define pte_special(pte) (0) -/* - * The following only works if pte_present() is not true. - */ -#define pte_file(pte) (pte_val(pte) & L_PTE_FILE) -#define pte_to_pgoff(x) (pte_val(x) >> 2) -#define pgoff_to_pte(x) __pte(((x) << 2) | L_PTE_FILE) - -#define PTE_FILE_MAX_BITS 30 - #define PTE_BIT_FUNC(fn,op) \ static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; } @@ -414,6 +405,20 @@ extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; */ #define MAX_SWAPFILES_CHECK() BUILD_BUG_ON(MAX_SWAPFILES_SHIFT > __SWP_TYPE_BITS) +/* + * Encode and decode a file entry. File entries are stored in the Linux + * page tables as follows: + * + * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 + * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 + * <------------------------ offset -------------------------> 1 0 + */ +#define pte_file(pte) (pte_val(pte) & L_PTE_FILE) +#define pte_to_pgoff(x) (pte_val(x) >> 2) +#define pgoff_to_pte(x) __pte(((x) << 2) | L_PTE_FILE) + +#define PTE_FILE_MAX_BITS 30 + /* Needs to be defined here and not in linux/mm.h, as it is arch dependent */ /* FIXME: this is not correct */ #define kern_addr_valid(addr) (1) -- cgit v1.1 From 81d8279ea31a3fc6d4ffacd87119a04c561ca62e Mon Sep 17 00:00:00 2001 From: Arnd Bergmann <arnd@arndb.de> Date: Thu, 18 Jun 2009 19:55:27 +0200 Subject: microblaze: fall back on generic header files for the ABI Almost all of the ABI relevant header files now have generic versions, so use those now in order to reduce the amount of architecture specific code. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michal Simek <monstr@monstr.eu> --- arch/microblaze/include/asm/ioctls.h | 92 +------------- arch/microblaze/include/asm/ipcbuf.h | 37 +----- arch/microblaze/include/asm/mman.h | 24 ---- arch/microblaze/include/asm/msgbuf.h | 32 +---- arch/microblaze/include/asm/param.h | 31 +---- arch/microblaze/include/asm/posix_types.h | 68 +--------- arch/microblaze/include/asm/sembuf.h | 35 +---- arch/microblaze/include/asm/shmbuf.h | 43 +------ arch/microblaze/include/asm/siginfo.h | 14 -- arch/microblaze/include/asm/socket.h | 70 +--------- arch/microblaze/include/asm/sockios.h | 24 +--- arch/microblaze/include/asm/stat.h | 69 +--------- arch/microblaze/include/asm/swab.h | 9 +- arch/microblaze/include/asm/termbits.h | 204 +----------------------------- arch/microblaze/include/asm/termios.h | 89 +------------ arch/microblaze/include/asm/types.h | 39 +----- arch/microblaze/include/asm/ucontext.h | 23 +--- 17 files changed, 16 insertions(+), 887 deletions(-) (limited to 'arch') diff --git a/arch/microblaze/include/asm/ioctls.h b/arch/microblaze/include/asm/ioctls.h index 03582b2..ec34c76 100644 --- a/arch/microblaze/include/asm/ioctls.h +++ b/arch/microblaze/include/asm/ioctls.h @@ -1,91 +1 @@ -/* - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_IOCTLS_H -#define _ASM_MICROBLAZE_IOCTLS_H - -#include <linux/ioctl.h> - -/* 0x54 is just a magic number to make these relatively unique ('T') */ - -#define TCGETS 0x5401 -#define TCSETS 0x5402 -#define TCSETSW 0x5403 -#define TCSETSF 0x5404 -#define TCGETA 0x5405 -#define TCSETA 0x5406 -#define TCSETAW 0x5407 -#define TCSETAF 0x5408 -#define TCSBRK 0x5409 -#define TCXONC 0x540A -#define TCFLSH 0x540B -#define TIOCEXCL 0x540C -#define TIOCNXCL 0x540D -#define TIOCSCTTY 0x540E -#define TIOCGPGRP 0x540F -#define TIOCSPGRP 0x5410 -#define TIOCOUTQ 0x5411 -#define TIOCSTI 0x5412 -#define TIOCGWINSZ 0x5413 -#define TIOCSWINSZ 0x5414 -#define TIOCMGET 0x5415 -#define TIOCMBIS 0x5416 -#define TIOCMBIC 0x5417 -#define TIOCMSET 0x5418 -#define TIOCGSOFTCAR 0x5419 -#define TIOCSSOFTCAR 0x541A -#define FIONREAD 0x541B -#define TIOCINQ FIONREAD -#define TIOCLINUX 0x541C -#define TIOCCONS 0x541D -#define TIOCGSERIAL 0x541E -#define TIOCSSERIAL 0x541F -#define TIOCPKT 0x5420 -#define FIONBIO 0x5421 -#define TIOCNOTTY 0x5422 -#define TIOCSETD 0x5423 -#define TIOCGETD 0x5424 -#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */ -#define TIOCTTYGSTRUCT 0x5426 /* For debugging only */ -#define TIOCSBRK 0x5427 /* BSD compatibility */ -#define TIOCCBRK 0x5428 /* BSD compatibility */ -#define TIOCGSID 0x5429 /* Return the session ID of FD */ -/* Get Pty Number (of pty-mux device) */ -#define TIOCGPTN _IOR('T', 0x30, unsigned int) -#define TIOCSPTLCK _IOW('T', 0x31, int) /* Lock/unlock Pty */ - -#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */ -#define FIOCLEX 0x5451 -#define FIOASYNC 0x5452 -#define TIOCSERCONFIG 0x5453 -#define TIOCSERGWILD 0x5454 -#define TIOCSERSWILD 0x5455 -#define TIOCGLCKTRMIOS 0x5456 -#define TIOCSLCKTRMIOS 0x5457 -#define TIOCSERGSTRUCT 0x5458 /* For debugging only */ -#define TIOCSERGETLSR 0x5459 /* Get line status register */ -#define TIOCSERGETMULTI 0x545A /* Get multiport config */ -#define TIOCSERSETMULTI 0x545B /* Set multiport config */ - -#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */ -#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ - -#define FIOQSIZE 0x545E - -/* Used for packet mode */ -#define TIOCPKT_DATA 0 -#define TIOCPKT_FLUSHREAD 1 -#define TIOCPKT_FLUSHWRITE 2 -#define TIOCPKT_STOP 4 -#define TIOCPKT_START 8 -#define TIOCPKT_NOSTOP 16 -#define TIOCPKT_DOSTOP 32 - -#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ - -#endif /* _ASM_MICROBLAZE_IOCTLS_H */ +#include <asm-generic/ioctls.h> diff --git a/arch/microblaze/include/asm/ipcbuf.h b/arch/microblaze/include/asm/ipcbuf.h index b056fa4..84c7e51 100644 --- a/arch/microblaze/include/asm/ipcbuf.h +++ b/arch/microblaze/include/asm/ipcbuf.h @@ -1,36 +1 @@ -/* - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_IPCBUF_H -#define _ASM_MICROBLAZE_IPCBUF_H - -/* - * The user_ipc_perm structure for microblaze architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 32-bit mode_t and seq - * - 2 miscellaneous 32-bit values - */ - -struct ipc64_perm { - __kernel_key_t key; - __kernel_uid32_t uid; - __kernel_gid32_t gid; - __kernel_uid32_t cuid; - __kernel_gid32_t cgid; - __kernel_mode_t mode; - unsigned short __pad1; - unsigned short seq; - unsigned short __pad2; - unsigned long __unused1; - unsigned long __unused2; -}; - -#endif /* _ASM_MICROBLAZE_IPCBUF_H */ +#include <asm-generic/ipcbuf.h> diff --git a/arch/microblaze/include/asm/mman.h b/arch/microblaze/include/asm/mman.h index 4914b13..8eebf89 100644 --- a/arch/microblaze/include/asm/mman.h +++ b/arch/microblaze/include/asm/mman.h @@ -1,25 +1 @@ -/* - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_MMAN_H -#define _ASM_MICROBLAZE_MMAN_H - #include <asm-generic/mman.h> - -#define MAP_GROWSDOWN 0x0100 /* stack-like segment */ -#define MAP_DENYWRITE 0x0800 /* ETXTBSY */ -#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */ -#define MAP_LOCKED 0x2000 /* pages are locked */ -#define MAP_NORESERVE 0x4000 /* don't check for reservations */ -#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */ -#define MAP_NONBLOCK 0x10000 /* do not block on IO */ - -#define MCL_CURRENT 1 /* lock all current mappings */ -#define MCL_FUTURE 2 /* lock all future mappings */ - -#endif /* _ASM_MICROBLAZE_MMAN_H */ diff --git a/arch/microblaze/include/asm/msgbuf.h b/arch/microblaze/include/asm/msgbuf.h index 09dd970..809134c 100644 --- a/arch/microblaze/include/asm/msgbuf.h +++ b/arch/microblaze/include/asm/msgbuf.h @@ -1,31 +1 @@ -#ifndef _ASM_MICROBLAZE_MSGBUF_H -#define _ASM_MICROBLAZE_MSGBUF_H - -/* - * The msqid64_ds structure for microblaze architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct msqid64_ds { - struct ipc64_perm msg_perm; - __kernel_time_t msg_stime; /* last msgsnd time */ - unsigned long __unused1; - __kernel_time_t msg_rtime; /* last msgrcv time */ - unsigned long __unused2; - __kernel_time_t msg_ctime; /* last change time */ - unsigned long __unused3; - unsigned long msg_cbytes; /* current number of bytes on queue */ - unsigned long msg_qnum; /* number of messages in queue */ - unsigned long msg_qbytes; /* max number of bytes on queue */ - __kernel_pid_t msg_lspid; /* pid of last msgsnd */ - __kernel_pid_t msg_lrpid; /* last receive pid */ - unsigned long __unused4; - unsigned long __unused5; -}; - -#endif /* _ASM_MICROBLAZE_MSGBUF_H */ +#include <asm-generic/msgbuf.h> diff --git a/arch/microblaze/include/asm/param.h b/arch/microblaze/include/asm/param.h index 8c538a4..965d454 100644 --- a/arch/microblaze/include/asm/param.h +++ b/arch/microblaze/include/asm/param.h @@ -1,30 +1 @@ -/* - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_PARAM_H -#define _ASM_MICROBLAZE_PARAM_H - -#ifdef __KERNEL__ -#define HZ CONFIG_HZ /* internal kernel timer frequency */ -#define USER_HZ 100 /* for user interfaces in "ticks" */ -#define CLOCKS_PER_SEC (USER_HZ) /* frequency at which times() counts */ -#endif /* __KERNEL__ */ - -#ifndef HZ -#define HZ 100 -#endif - -#define EXEC_PAGESIZE 4096 - -#ifndef NOGROUP -#define NOGROUP (-1) -#endif - -#define MAXHOSTNAMELEN 64 /* max length of hostname */ - -#endif /* _ASM_MICROBLAZE_PARAM_H */ +#include <asm-generic/param.h> diff --git a/arch/microblaze/include/asm/posix_types.h b/arch/microblaze/include/asm/posix_types.h index 8c758b23..0e15039 100644 --- a/arch/microblaze/include/asm/posix_types.h +++ b/arch/microblaze/include/asm/posix_types.h @@ -1,73 +1,9 @@ -/* - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - #ifndef _ASM_MICROBLAZE_POSIX_TYPES_H #define _ASM_MICROBLAZE_POSIX_TYPES_H -/* - * This file is generally used by user-level software, so you need to - * be a little careful about namespace pollution etc. Also, we cannot - * assume GCC is being used. - */ - -typedef unsigned long __kernel_ino_t; typedef unsigned short __kernel_mode_t; -typedef unsigned int __kernel_nlink_t; -typedef long __kernel_off_t; -typedef int __kernel_pid_t; -typedef unsigned int __kernel_ipc_pid_t; -typedef unsigned int __kernel_uid_t; -typedef unsigned int __kernel_gid_t; -typedef unsigned long __kernel_size_t; -typedef long __kernel_ssize_t; -typedef int __kernel_ptrdiff_t; -typedef long __kernel_time_t; -typedef long __kernel_suseconds_t; -typedef long __kernel_clock_t; -typedef int __kernel_timer_t; -typedef int __kernel_clockid_t; -typedef int __kernel_daddr_t; -typedef char *__kernel_caddr_t; -typedef unsigned short __kernel_uid16_t; -typedef unsigned short __kernel_gid16_t; -typedef unsigned int __kernel_uid32_t; -typedef unsigned int __kernel_gid32_t; - -typedef unsigned int __kernel_old_uid_t; -typedef unsigned int __kernel_old_gid_t; -typedef unsigned int __kernel_old_dev_t; - -#ifdef __GNUC__ -typedef long long __kernel_loff_t; -#endif - -typedef struct { -#if defined(__KERNEL__) || defined(__USE_ALL) - int val[2]; -#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */ - int __val[2]; -#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */ -} __kernel_fsid_t; - -#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) - -#undef __FD_SET -#define __FD_SET(d, set) ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d)) - -#undef __FD_CLR -#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d)) - -#undef __FD_ISSET -#define __FD_ISSET(d, set) (!!((set)->fds_bits[__FDELT(d)] & __FDMASK(d))) - -#undef __FD_ZERO -#define __FD_ZERO(fdsetp) (memset(fdsetp, 0, sizeof(*(fd_set *)fdsetp))) +#define __kernel_mode_t __kernel_mode_t -#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */ +#include <asm-generic/posix_types.h> #endif /* _ASM_MICROBLAZE_POSIX_TYPES_H */ diff --git a/arch/microblaze/include/asm/sembuf.h b/arch/microblaze/include/asm/sembuf.h index b804ed7..7673b83 100644 --- a/arch/microblaze/include/asm/sembuf.h +++ b/arch/microblaze/include/asm/sembuf.h @@ -1,34 +1 @@ -/* - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_SEMBUF_H -#define _ASM_MICROBLAZE_SEMBUF_H - -/* - * The semid64_ds structure for microblaze architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct semid64_ds { - struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ - __kernel_time_t sem_otime; /* last semop time */ - unsigned long __unused1; - __kernel_time_t sem_ctime; /* last change time */ - unsigned long __unused2; - unsigned long sem_nsems; /* no. of semaphores in array */ - unsigned long __unused3; - unsigned long __unused4; -}; - - -#endif /* _ASM_MICROBLAZE_SEMBUF_H */ +#include <asm-generic/sembuf.h> diff --git a/arch/microblaze/include/asm/shmbuf.h b/arch/microblaze/include/asm/shmbuf.h index f829c58..83c05fc 100644 --- a/arch/microblaze/include/asm/shmbuf.h +++ b/arch/microblaze/include/asm/shmbuf.h @@ -1,42 +1 @@ -#ifndef _ASM_MICROBLAZE_SHMBUF_H -#define _ASM_MICROBLAZE_SHMBUF_H - -/* - * The shmid64_ds structure for microblaze architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct shmid64_ds { - struct ipc64_perm shm_perm; /* operation perms */ - size_t shm_segsz; /* size of segment (bytes) */ - __kernel_time_t shm_atime; /* last attach time */ - unsigned long __unused1; - __kernel_time_t shm_dtime; /* last detach time */ - unsigned long __unused2; - __kernel_time_t shm_ctime; /* last change time */ - unsigned long __unused3; - __kernel_pid_t shm_cpid; /* pid of creator */ - __kernel_pid_t shm_lpid; /* pid of last operator */ - unsigned long shm_nattch; /* no. of current attaches */ - unsigned long __unused4; - unsigned long __unused5; -}; - -struct shminfo64 { - unsigned long shmmax; - unsigned long shmmin; - unsigned long shmmni; - unsigned long shmseg; - unsigned long shmall; - unsigned long __unused1; - unsigned long __unused2; - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* _ASM_MICROBLAZE_SHMBUF_H */ +#include <asm-generic/shmbuf.h> diff --git a/arch/microblaze/include/asm/siginfo.h b/arch/microblaze/include/asm/siginfo.h index f162911..0815d29 100644 --- a/arch/microblaze/include/asm/siginfo.h +++ b/arch/microblaze/include/asm/siginfo.h @@ -1,15 +1 @@ -/* - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_SIGINFO_H -#define _ASM_MICROBLAZE_SIGINFO_H - -#include <linux/types.h> #include <asm-generic/siginfo.h> - -#endif /* _ASM_MICROBLAZE_SIGINFO_H */ diff --git a/arch/microblaze/include/asm/socket.h b/arch/microblaze/include/asm/socket.h index 8259368..6b71384 100644 --- a/arch/microblaze/include/asm/socket.h +++ b/arch/microblaze/include/asm/socket.h @@ -1,69 +1 @@ -/* - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_SOCKET_H -#define _ASM_MICROBLAZE_SOCKET_H - -#include <asm/sockios.h> - -/* For setsockoptions(2) */ -#define SOL_SOCKET 1 - -#define SO_DEBUG 1 -#define SO_REUSEADDR 2 -#define SO_TYPE 3 -#define SO_ERROR 4 -#define SO_DONTROUTE 5 -#define SO_BROADCAST 6 -#define SO_SNDBUF 7 -#define SO_RCVBUF 8 -#define SO_SNDBUFFORCE 32 -#define SO_RCVBUFFORCE 33 -#define SO_KEEPALIVE 9 -#define SO_OOBINLINE 10 -#define SO_NO_CHECK 11 -#define SO_PRIORITY 12 -#define SO_LINGER 13 -#define SO_BSDCOMPAT 14 -/* To add :#define SO_REUSEPORT 15 */ -#define SO_PASSCRED 16 -#define SO_PEERCRED 17 -#define SO_RCVLOWAT 18 -#define SO_SNDLOWAT 19 -#define SO_RCVTIMEO 20 -#define SO_SNDTIMEO 21 - -/* Security levels - as per NRL IPv6 - don't actually do anything */ -#define SO_SECURITY_AUTHENTICATION 22 -#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 -#define SO_SECURITY_ENCRYPTION_NETWORK 24 - -#define SO_BINDTODEVICE 25 - -/* Socket filtering */ -#define SO_ATTACH_FILTER 26 -#define SO_DETACH_FILTER 27 - -#define SO_PEERNAME 28 -#define SO_TIMESTAMP 29 -#define SCM_TIMESTAMP SO_TIMESTAMP - -#define SO_ACCEPTCONN 30 - -#define SO_PEERSEC 31 -#define SO_PASSSEC 34 - -#define SO_TIMESTAMPNS 35 -#define SCM_TIMESTAMPNS SO_TIMESTAMPNS - -#define SO_MARK 36 - -#define SO_TIMESTAMPING 37 -#define SCM_TIMESTAMPING SO_TIMESTAMPING - -#endif /* _ASM_MICROBLAZE_SOCKET_H */ +#include <asm-generic/socket.h> diff --git a/arch/microblaze/include/asm/sockios.h b/arch/microblaze/include/asm/sockios.h index 9fff57a..def6d47 100644 --- a/arch/microblaze/include/asm/sockios.h +++ b/arch/microblaze/include/asm/sockios.h @@ -1,23 +1 @@ -/* - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_SOCKIOS_H -#define _ASM_MICROBLAZE_SOCKIOS_H - -#include <linux/ioctl.h> - -/* Socket-level I/O control calls. */ -#define FIOSETOWN 0x8901 -#define SIOCSPGRP 0x8902 -#define FIOGETOWN 0x8903 -#define SIOCGPGRP 0x8904 -#define SIOCATMARK 0x8905 -#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */ -#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ - -#endif /* _ASM_MICROBLAZE_SOCKIOS_H */ +#include <asm-generic/sockios.h> diff --git a/arch/microblaze/include/asm/stat.h b/arch/microblaze/include/asm/stat.h index a15f775..3dc90fa 100644 --- a/arch/microblaze/include/asm/stat.h +++ b/arch/microblaze/include/asm/stat.h @@ -1,68 +1 @@ -/* - * Microblaze stat structure - * - * Copyright (C) 2001,02,03 NEC Electronics Corporation - * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -#ifndef _ASM_MICROBLAZE_STAT_H -#define _ASM_MICROBLAZE_STAT_H - -#include <linux/posix_types.h> - -#define STAT_HAVE_NSEC 1 - -struct stat { - unsigned long st_dev; - unsigned long st_ino; - unsigned int st_mode; - unsigned int st_nlink; - unsigned int st_uid; - unsigned int st_gid; - unsigned long st_rdev; - unsigned long __pad1; - long st_size; - int st_blksize; - int __pad2; - long st_blocks; - int st_atime; - unsigned int st_atime_nsec; - int st_mtime; - unsigned int st_mtime_nsec; - int st_ctime; - unsigned int st_ctime_nsec; - unsigned long __unused4; - unsigned long __unused5; -}; - -struct stat64 { - unsigned long long st_dev; /* Device. */ - unsigned long long st_ino; /* File serial number. */ - unsigned int st_mode; /* File mode. */ - unsigned int st_nlink; /* Link count. */ - unsigned int st_uid; /* User ID of the file's owner. */ - unsigned int st_gid; /* Group ID of the file's group. */ - unsigned long long st_rdev; /* Device number, if device. */ - unsigned long long __pad1; - long long st_size; /* Size of file, in bytes. */ - int st_blksize; /* Optimal block size for I/O. */ - int __pad2; - long long st_blocks; /* Number 512-byte blocks allocated. */ - int st_atime; /* Time of last access. */ - unsigned int st_atime_nsec; - int st_mtime; /* Time of last modification. */ - unsigned int st_mtime_nsec; - int st_ctime; /* Time of last status change. */ - unsigned int st_ctime_nsec; - unsigned int __unused4; - unsigned int __unused5; -}; - -#endif /* _ASM_MICROBLAZE_STAT_H */ - +#include <asm-generic/stat.h> diff --git a/arch/microblaze/include/asm/swab.h b/arch/microblaze/include/asm/swab.h index b375d7b..7847e56 100644 --- a/arch/microblaze/include/asm/swab.h +++ b/arch/microblaze/include/asm/swab.h @@ -1,8 +1 @@ -#ifndef _ASM_MICROBLAZE_SWAB_H -#define _ASM_MICROBLAZE_SWAB_H - -#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__) -#define __SWAB_64_THRU_32__ -#endif - -#endif /* _ASM_MICROBLAZE_SWAB_H */ +#include <asm-generic/swab.h> diff --git a/arch/microblaze/include/asm/termbits.h b/arch/microblaze/include/asm/termbits.h index a1b64bc..3935b10 100644 --- a/arch/microblaze/include/asm/termbits.h +++ b/arch/microblaze/include/asm/termbits.h @@ -1,203 +1 @@ -/* - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_TERMBITS_H -#define _ASM_MICROBLAZE_TERMBITS_H - -#include <linux/posix_types.h> - -typedef unsigned char cc_t; -typedef unsigned int speed_t; -typedef unsigned int tcflag_t; - -#define NCCS 19 -struct termios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ -}; - -struct ktermios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -/* c_cc characters */ - -#define VINTR 0 -#define VQUIT 1 -#define VERASE 2 -#define VKILL 3 -#define VEOF 4 -#define VTIME 5 -#define VMIN 6 -#define VSWTC 7 -#define VSTART 8 -#define VSTOP 9 -#define VSUSP 10 -#define VEOL 11 -#define VREPRINT 12 -#define VDISCARD 13 -#define VWERASE 14 -#define VLNEXT 15 -#define VEOL2 16 - -/* c_iflag bits */ - -#define IGNBRK 0000001 -#define BRKINT 0000002 -#define IGNPAR 0000004 -#define PARMRK 0000010 -#define INPCK 0000020 -#define ISTRIP 0000040 -#define INLCR 0000100 -#define IGNCR 0000200 -#define ICRNL 0000400 -#define IUCLC 0001000 -#define IXON 0002000 -#define IXANY 0004000 -#define IXOFF 0010000 -#define IMAXBEL 0020000 -#define IUTF8 0040000 - -/* c_oflag bits */ - -#define OPOST 0000001 -#define OLCUC 0000002 -#define ONLCR 0000004 -#define OCRNL 0000010 -#define ONOCR 0000020 -#define ONLRET 0000040 -#define OFILL 0000100 -#define OFDEL 0000200 -#define NLDLY 0000400 -#define NL0 0000000 -#define NL1 0000400 -#define CRDLY 0003000 -#define CR0 0000000 -#define CR1 0001000 -#define CR2 0002000 -#define CR3 0003000 -#define TABDLY 0014000 -#define TAB0 0000000 -#define TAB1 0004000 -#define TAB2 0010000 -#define TAB3 0014000 -#define XTABS 0014000 -#define BSDLY 0020000 -#define BS0 0000000 -#define BS1 0020000 -#define VTDLY 0040000 -#define VT0 0000000 -#define VT1 0040000 -#define FFDLY 0100000 -#define FF0 0000000 -#define FF1 0100000 - -/* c_cflag bit meaning */ - -#define CBAUD 0010017 -#define B0 0000000 /* hang up */ -#define B50 0000001 -#define B75 0000002 -#define B110 0000003 -#define B134 0000004 -#define B150 0000005 -#define B200 0000006 -#define B300 0000007 -#define B600 0000010 -#define B1200 0000011 -#define B1800 0000012 -#define B2400 0000013 -#define B4800 0000014 -#define B9600 0000015 -#define B19200 0000016 -#define B38400 0000017 -#define EXTA B19200 -#define EXTB B38400 -#define CSIZE 0000060 -#define CS5 0000000 -#define CS6 0000020 -#define CS7 0000040 -#define CS8 0000060 -#define CSTOPB 0000100 -#define CREAD 0000200 -#define PARENB 0000400 -#define PARODD 0001000 -#define HUPCL 0002000 -#define CLOCAL 0004000 -#define CBAUDEX 0010000 -#define B57600 0010001 -#define B115200 0010002 -#define B230400 0010003 -#define B460800 0010004 -#define B500000 0010005 -#define B576000 0010006 -#define B921600 0010007 -#define BOTHER 0010000 -#define B1000000 0010010 -#define B1152000 0010011 -#define B1500000 0010012 -#define B2000000 0010013 -#define B2500000 0010014 -#define B3000000 0010015 -#define B3500000 0010016 -#define B4000000 0010017 -#define CIBAUD 002003600000 /* input baud rate (not used) */ -#define CMSPAR 010000000000 /* mark or space (stick) parity */ -#define CRTSCTS 020000000000 /* flow control */ - -#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ - -/* c_lflag bits */ - -#define ISIG 0000001 -#define ICANON 0000002 -#define XCASE 0000004 -#define ECHO 0000010 -#define ECHOE 0000020 -#define ECHOK 0000040 -#define ECHONL 0000100 -#define NOFLSH 0000200 -#define TOSTOP 0000400 -#define ECHOCTL 0001000 -#define ECHOPRT 0002000 -#define ECHOKE 0004000 -#define FLUSHO 0010000 -#define PENDIN 0040000 -#define IEXTEN 0100000 - -/* tcflow() and TCXONC use these */ - -#define TCOOFF 0 -#define TCOON 1 -#define TCIOFF 2 -#define TCION 3 - -/* tcflush() and TCFLSH use these */ - -#define TCIFLUSH 0 -#define TCOFLUSH 1 -#define TCIOFLUSH 2 - -/* tcsetattr uses these */ - -#define TCSANOW 0 -#define TCSADRAIN 1 -#define TCSAFLUSH 2 - -#endif /* _ASM_MICROBLAZE_TERMBITS_H */ +#include <asm-generic/termbits.h> diff --git a/arch/microblaze/include/asm/termios.h b/arch/microblaze/include/asm/termios.h index 47a46d1..280d78a 100644 --- a/arch/microblaze/include/asm/termios.h +++ b/arch/microblaze/include/asm/termios.h @@ -1,88 +1 @@ -/* - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_TERMIOS_H -#define _ASM_MICROBLAZE_TERMIOS_H - -#include <linux/string.h> -#include <asm/termbits.h> -#include <asm/ioctls.h> - -struct winsize { - unsigned short ws_row; - unsigned short ws_col; - unsigned short ws_xpixel; - unsigned short ws_ypixel; -}; - -#define NCC 8 -struct termio { - unsigned short c_iflag; /* input mode flags */ - unsigned short c_oflag; /* output mode flags */ - unsigned short c_cflag; /* control mode flags */ - unsigned short c_lflag; /* local mode flags */ - unsigned char c_line; /* line discipline */ - unsigned char c_cc[NCC]; /* control characters */ -}; - -#ifdef __KERNEL__ -/* intr=^C quit=^| erase=del kill=^U - eof=^D vtime=\0 vmin=\1 sxtc=\0 - start=^Q stop=^S susp=^Z eol=\0 - reprint=^R discard=^U werase=^W lnext=^V - eol2=\0 -*/ -#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" -#endif - -/* Modem lines */ - -#define TIOCM_LE 0x001 -#define TIOCM_DTR 0x002 -#define TIOCM_RTS 0x004 -#define TIOCM_ST 0x008 -#define TIOCM_SR 0x010 -#define TIOCM_CTS 0x020 -#define TIOCM_CAR 0x040 -#define TIOCM_RNG 0x080 -#define TIOCM_DSR 0x100 -#define TIOCM_CD TIOCM_CAR -#define TIOCM_RI TIOCM_RNG -#define TIOCM_OUT1 0x2000 -#define TIOCM_OUT2 0x4000 -#define TIOCM_LOOP 0x8000 - -/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ - -/* Line disciplines */ - -#define N_TTY 0 -#define N_SLIP 1 -#define N_MOUSE 2 -#define N_PPP 3 -#define N_STRIP 4 -#define N_AX25 5 -#define N_X25 6 /* X.25 async */ -#define N_6PACK 7 -#define N_MASC 8 /* Reserved for Mobitex module <kaz@cafe.net> */ -#define N_R3964 9 /* Reserved for Simatic R3964 module */ -#define N_PROFIBUS_FDL 10 /* Reserved for Profibus <Dave@mvhi.com> */ -#define N_IRDA 11 /* Linux IR - http://irda.sourceforge.net/ */ -#define N_SMSBLOCK 12 /* SMS block mode - for talking to GSM data cards - about SMS messages */ -#define N_HDLC 13 /* synchronous HDLC */ -#define N_SYNC_PPP 14 -#define N_HCI 15 /* Bluetooth HCI UART */ - -#ifdef __KERNEL__ - -#include <asm-generic/termios-base.h> - -#endif /* __KERNEL__ */ - -#endif /* _ASM_MICROBLAZE_TERMIOS_H */ +#include <asm-generic/termios.h> diff --git a/arch/microblaze/include/asm/types.h b/arch/microblaze/include/asm/types.h index bebc0183..b9e79bc 100644 --- a/arch/microblaze/include/asm/types.h +++ b/arch/microblaze/include/asm/types.h @@ -1,38 +1 @@ -/* - * Copyright (C) Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_TYPES_H -#define _ASM_MICROBLAZE_TYPES_H - -/* - * This file is never included by application software unless - * explicitly requested (e.g., via linux/types.h) in which case the - * application is Linux specific so (user-) name space pollution is - * not a major issue. However, for interoperability, libraries still - * need to be careful to avoid a name clashes. - */ - -#include <asm-generic/int-ll64.h> - -# ifndef __ASSEMBLY__ - -typedef unsigned short umode_t; - -/* - * These aren't exported outside the kernel to avoid name space clashes - */ -# ifdef __KERNEL__ -# define BITS_PER_LONG 32 - -/* Dma addresses are 32-bits wide. */ - -typedef u32 dma_addr_t; - -# endif/* __KERNEL__ */ -# endif /* __ASSEMBLY__ */ -#endif /* _ASM_MICROBLAZE_TYPES_H */ +#include <asm-generic/types.h> diff --git a/arch/microblaze/include/asm/ucontext.h b/arch/microblaze/include/asm/ucontext.h index 11f6bb3..9bc07b9 100644 --- a/arch/microblaze/include/asm/ucontext.h +++ b/arch/microblaze/include/asm/ucontext.h @@ -1,22 +1 @@ -/* - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_UCONTEXT_H -#define _ASM_MICROBLAZE_UCONTEXT_H - -#include <asm/sigcontext.h> - -struct ucontext { - unsigned long uc_flags; - struct ucontext *uc_link; - stack_t uc_stack; - struct sigcontext uc_mcontext; - sigset_t uc_sigmask; /* mask last for extensibility */ -}; - -#endif /* _ASM_MICROBLAZE_UCONTEXT_H */ +#include <asm-generic/ucontext.h> -- cgit v1.1 From 14f8738976991d2f8fb6ab6e10e9003562c3d6bb Mon Sep 17 00:00:00 2001 From: Remis Lima Baima <remis.developer@googlemail.com> Date: Thu, 18 Jun 2009 19:55:32 +0200 Subject: microblaze: use the generic lib/checksum.c The microblaze checksum code is mostly identical to the asm-generic+lib version, so use that instead. Signed-off-by: Remis Lima Baima <remis.developer@googlemail.com> Signed-off-by: Michal Simek <monstr@monstr.eu> --- arch/microblaze/Kconfig | 3 + arch/microblaze/include/asm/checksum.h | 70 +------------- arch/microblaze/lib/Makefile | 2 +- arch/microblaze/lib/checksum.c | 172 --------------------------------- 4 files changed, 6 insertions(+), 241 deletions(-) delete mode 100644 arch/microblaze/lib/checksum.c (limited to 'arch') diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig index b50b845..2db722d 100644 --- a/arch/microblaze/Kconfig +++ b/arch/microblaze/Kconfig @@ -53,6 +53,9 @@ config GENERIC_HARDIRQS_NO__DO_IRQ config GENERIC_GPIO def_bool y +config GENERIC_CSUM + def_bool y + config PCI def_bool n diff --git a/arch/microblaze/include/asm/checksum.h b/arch/microblaze/include/asm/checksum.h index 97ea46b..128bf03 100644 --- a/arch/microblaze/include/asm/checksum.h +++ b/arch/microblaze/include/asm/checksum.h @@ -10,12 +10,11 @@ #ifndef _ASM_MICROBLAZE_CHECKSUM_H #define _ASM_MICROBLAZE_CHECKSUM_H -#include <linux/in6.h> - /* * computes the checksum of the TCP/UDP pseudo-header * returns a 16-bit checksum, already complemented */ +#define csum_tcpudp_nofold csum_tcpudp_nofold static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len, unsigned short proto, __wsum sum) @@ -30,71 +29,6 @@ csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len, return sum; } -/* - * computes the checksum of a memory block at buff, length len, - * and adds in "sum" (32-bit) - * - * returns a 32-bit number suitable for feeding into itself - * or csum_tcpudp_magic - * - * this function must be called with even lengths, except - * for the last fragment, which may be odd - * - * it's best to have buff aligned on a 32-bit boundary - */ -extern __wsum csum_partial(const void *buff, int len, __wsum sum); - -/* - * the same as csum_partial, but copies from src while it - * checksums - * - * here even more important to align src and dst on a 32-bit (or even - * better 64-bit) boundary - */ -extern __wsum csum_partial_copy(const void *src, void *dst, int len, - __wsum sum); - -/* - * the same as csum_partial_copy, but copies from user space. - * - * here even more important to align src and dst on a 32-bit (or even - * better 64-bit) boundary - */ -extern __wsum csum_partial_copy_from_user(const void __user *src, void *dst, - int len, __wsum sum, int *csum_err); - -#define csum_partial_copy_nocheck(src, dst, len, sum) \ - csum_partial_copy((src), (dst), (len), (sum)) - -/* - * This is a version of ip_compute_csum() optimized for IP headers, - * which always checksum on 4 octet boundaries. - * - */ -extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl); - -/* - * Fold a partial checksum - */ -static inline __sum16 csum_fold(__wsum csum) -{ - u32 sum = (__force u32)csum; - sum = (sum & 0xffff) + (sum >> 16); - sum = (sum & 0xffff) + (sum >> 16); - return (__force __sum16)~sum; -} - -static inline __sum16 -csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len, - unsigned short proto, __wsum sum) -{ - return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum)); -} - -/* - * this routine is used for miscellaneous IP-like checksums, mainly - * in icmp.c - */ -extern __sum16 ip_compute_csum(const void *buff, int len); +#include <asm-generic/checksum.h> #endif /* _ASM_MICROBLAZE_CHECKSUM_H */ diff --git a/arch/microblaze/lib/Makefile b/arch/microblaze/lib/Makefile index 71c8cb6..b579db06 100644 --- a/arch/microblaze/lib/Makefile +++ b/arch/microblaze/lib/Makefile @@ -2,7 +2,7 @@ # Makefile # -lib-y := memset.o checksum.o +lib-y := memset.o ifeq ($(CONFIG_OPT_LIB_ASM),y) lib-y += fastcopy.o diff --git a/arch/microblaze/lib/checksum.c b/arch/microblaze/lib/checksum.c deleted file mode 100644 index f08e745..0000000 --- a/arch/microblaze/lib/checksum.c +++ /dev/null @@ -1,172 +0,0 @@ -/* - * - * INET An implementation of the TCP/IP protocol suite for the LINUX - * operating system. INET is implemented using the BSD Socket - * interface as the means of communication with the user level. - * - * IP/TCP/UDP checksumming routines - * - * Authors: Jorge Cwik, <jorge@laser.satlink.net> - * Arnt Gulbrandsen, <agulbra@nvg.unit.no> - * Tom May, <ftom@netcom.com> - * Andreas Schwab, <schwab@issan.informatik.uni-dortmund.de> - * Lots of code moved from tcp.c and ip.c; see those files - * for more names. - * - * 03/02/96 Jes Sorensen, Andreas Schwab, Roman Hodek: - * Fixed some nasty bugs, causing some horrible crashes. - * A: At some points, the sum (%0) was used as - * length-counter instead of the length counter - * (%1). Thanks to Roman Hodek for pointing this out. - * B: GCC seems to mess up if one uses too many - * data-registers to hold input values and one tries to - * specify d0 and d1 as scratch registers. Letting gcc - * choose these registers itself solves the problem. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -/* Revised by Kenneth Albanowski for m68knommu. Basic problem: unaligned access - kills, so most of the assembly has to go. */ - -#include <linux/module.h> -#include <net/checksum.h> - -#include <asm/byteorder.h> - -static inline unsigned short from32to16(unsigned long x) -{ - /* add up 16-bit and 16-bit for 16+c bit */ - x = (x & 0xffff) + (x >> 16); - /* add up carry.. */ - x = (x & 0xffff) + (x >> 16); - return x; -} - -static unsigned int do_csum(const unsigned char *buff, int len) -{ - int odd, count; - unsigned long result = 0; - - if (len <= 0) - goto out; - odd = 1 & (unsigned long) buff; - if (odd) { - result = *buff; - len--; - buff++; - } - count = len >> 1; /* nr of 16-bit words.. */ - if (count) { - if (2 & (unsigned long) buff) { - result += *(unsigned short *) buff; - count--; - len -= 2; - buff += 2; - } - count >>= 1; /* nr of 32-bit words.. */ - if (count) { - unsigned long carry = 0; - do { - unsigned long w = *(unsigned long *) buff; - count--; - buff += 4; - result += carry; - result += w; - carry = (w > result); - } while (count); - result += carry; - result = (result & 0xffff) + (result >> 16); - } - if (len & 2) { - result += *(unsigned short *) buff; - buff += 2; - } - } - if (len & 1) - result += (*buff << 8); - result = from32to16(result); - if (odd) - result = ((result >> 8) & 0xff) | ((result & 0xff) << 8); -out: - return result; -} - -/* - * This is a version of ip_compute_csum() optimized for IP headers, - * which always checksum on 4 octet boundaries. - */ -__sum16 ip_fast_csum(const void *iph, unsigned int ihl) -{ - return (__force __sum16)~do_csum(iph, ihl*4); -} -EXPORT_SYMBOL(ip_fast_csum); - -/* - * computes the checksum of a memory block at buff, length len, - * and adds in "sum" (32-bit) - * - * returns a 32-bit number suitable for feeding into itself - * or csum_tcpudp_magic - * - * this function must be called with even lengths, except - * for the last fragment, which may be odd - * - * it's best to have buff aligned on a 32-bit boundary - */ -__wsum csum_partial(const void *buff, int len, __wsum wsum) -{ - unsigned int sum = (__force unsigned int)wsum; - unsigned int result = do_csum(buff, len); - - /* add in old sum, and carry.. */ - result += sum; - if (sum > result) - result += 1; - return (__force __wsum)result; -} -EXPORT_SYMBOL(csum_partial); - -/* - * this routine is used for miscellaneous IP-like checksums, mainly - * in icmp.c - */ -__sum16 ip_compute_csum(const void *buff, int len) -{ - return (__force __sum16)~do_csum(buff, len); -} -EXPORT_SYMBOL(ip_compute_csum); - -/* - * copy from fs while checksumming, otherwise like csum_partial - */ -__wsum -csum_partial_copy_from_user(const void __user *src, void *dst, int len, - __wsum sum, int *csum_err) -{ - int missing; - - missing = __copy_from_user(dst, src, len); - if (missing) { - memset(dst + len - missing, 0, missing); - *csum_err = -EFAULT; - } else - *csum_err = 0; - - return csum_partial(dst, len, sum); -} -EXPORT_SYMBOL(csum_partial_copy_from_user); - -/* - * copy from ds while checksumming, otherwise like csum_partial - */ -__wsum -csum_partial_copy(const void *src, void *dst, int len, __wsum sum) -{ - memcpy(dst, src, len); - return csum_partial(dst, len, sum); -} -EXPORT_SYMBOL(csum_partial_copy); -- cgit v1.1 From 0a58458341fd571e521be542ff746a4a8995980c Mon Sep 17 00:00:00 2001 From: Remis Lima Baima <remis.developer@googlemail.com> Date: Thu, 18 Jun 2009 19:55:33 +0200 Subject: microblaze: convert all simple headers to use asm-generic All the simple microblaze header files were adapted to use their asm-generic implementations. These files are more simple and were quite straightforward to change. fb.h, vga.h and parport.h previously did not exist, using the generic version makes it possible to build more drivers successfully in allyesonfig. Signed-off-by: Remis Lima Baima <remis.developer@googlemail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michal Simek <monstr@monstr.eu> --- arch/microblaze/include/asm/atomic.h | 101 +-------------------------- arch/microblaze/include/asm/bitops.h | 26 ------- arch/microblaze/include/asm/bug.h | 14 ---- arch/microblaze/include/asm/bugs.h | 18 +---- arch/microblaze/include/asm/fb.h | 1 + arch/microblaze/include/asm/hardirq.h | 14 +--- arch/microblaze/include/asm/irq.h | 6 +- arch/microblaze/include/asm/mmu.h | 7 +- arch/microblaze/include/asm/mmu_context.h | 2 +- arch/microblaze/include/asm/mmu_context_no.h | 23 ------ arch/microblaze/include/asm/module.h | 10 +-- arch/microblaze/include/asm/parport.h | 1 + arch/microblaze/include/asm/pci.h | 2 +- arch/microblaze/include/asm/scatterlist.h | 29 +------- arch/microblaze/include/asm/serial.h | 15 +--- arch/microblaze/include/asm/shmparam.h | 7 +- arch/microblaze/include/asm/system.h | 3 + arch/microblaze/include/asm/timex.h | 6 +- arch/microblaze/include/asm/vga.h | 2 +- 19 files changed, 21 insertions(+), 266 deletions(-) create mode 100644 arch/microblaze/include/asm/fb.h delete mode 100644 arch/microblaze/include/asm/mmu_context_no.h create mode 100644 arch/microblaze/include/asm/parport.h (limited to 'arch') diff --git a/arch/microblaze/include/asm/atomic.h b/arch/microblaze/include/asm/atomic.h index 0de612a..6d2e1d4 100644 --- a/arch/microblaze/include/asm/atomic.h +++ b/arch/microblaze/include/asm/atomic.h @@ -1,95 +1,7 @@ -/* - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - #ifndef _ASM_MICROBLAZE_ATOMIC_H #define _ASM_MICROBLAZE_ATOMIC_H -#include <linux/types.h> -#include <linux/compiler.h> /* likely */ -#include <asm/system.h> /* local_irq_XXX and friends */ - -#define ATOMIC_INIT(i) { (i) } -#define atomic_read(v) ((v)->counter) -#define atomic_set(v, i) (((v)->counter) = (i)) - -#define atomic_inc(v) (atomic_add_return(1, (v))) -#define atomic_dec(v) (atomic_sub_return(1, (v))) - -#define atomic_add(i, v) (atomic_add_return(i, (v))) -#define atomic_sub(i, v) (atomic_sub_return(i, (v))) - -#define atomic_inc_return(v) (atomic_add_return(1, (v))) -#define atomic_dec_return(v) (atomic_sub_return(1, (v))) - -#define atomic_inc_and_test(v) (atomic_add_return(1, (v)) == 0) -#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0) - -#define atomic_inc_not_zero(v) (atomic_add_unless((v), 1, 0)) - -#define atomic_sub_and_test(i, v) (atomic_sub_return((i), (v)) == 0) - -static inline int atomic_cmpxchg(atomic_t *v, int old, int new) -{ - int ret; - unsigned long flags; - - local_irq_save(flags); - ret = v->counter; - if (likely(ret == old)) - v->counter = new; - local_irq_restore(flags); - - return ret; -} - -static inline int atomic_add_unless(atomic_t *v, int a, int u) -{ - int c, old; - - c = atomic_read(v); - while (c != u && (old = atomic_cmpxchg((v), c, c + a)) != c) - c = old; - return c != u; -} - -static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr) -{ - unsigned long flags; - - local_irq_save(flags); - *addr &= ~mask; - local_irq_restore(flags); -} - -/** - * atomic_add_return - add and return - * @i: integer value to add - * @v: pointer of type atomic_t - * - * Atomically adds @i to @v and returns @i + @v - */ -static inline int atomic_add_return(int i, atomic_t *v) -{ - unsigned long flags; - int val; - - local_irq_save(flags); - val = v->counter; - v->counter = val += i; - local_irq_restore(flags); - - return val; -} - -static inline int atomic_sub_return(int i, atomic_t *v) -{ - return atomic_add_return(-i, v); -} +#include <asm-generic/atomic.h> /* * Atomically test *v and decrement if it is greater than 0. @@ -109,15 +21,4 @@ static inline int atomic_dec_if_positive(atomic_t *v) return res; } -#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0) -#define atomic_xchg(v, new) (xchg(&((v)->counter), new)) - -/* Atomic operations are already serializing */ -#define smp_mb__before_atomic_dec() barrier() -#define smp_mb__after_atomic_dec() barrier() -#define smp_mb__before_atomic_inc() barrier() -#define smp_mb__after_atomic_inc() barrier() - -#include <asm-generic/atomic-long.h> - #endif /* _ASM_MICROBLAZE_ATOMIC_H */ diff --git a/arch/microblaze/include/asm/bitops.h b/arch/microblaze/include/asm/bitops.h index d6df1fd..a72468f 100644 --- a/arch/microblaze/include/asm/bitops.h +++ b/arch/microblaze/include/asm/bitops.h @@ -1,27 +1 @@ -/* - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_BITOPS_H -#define _ASM_MICROBLAZE_BITOPS_H - -/* - * Copyright 1992, Linus Torvalds. - */ - -#include <asm/byteorder.h> /* swab32 */ -#include <asm/system.h> /* save_flags */ - -/* - * clear_bit() doesn't provide any barrier for the compiler. - */ -#define smp_mb__before_clear_bit() barrier() -#define smp_mb__after_clear_bit() barrier() #include <asm-generic/bitops.h> -#include <asm-generic/bitops/__fls.h> - -#endif /* _ASM_MICROBLAZE_BITOPS_H */ diff --git a/arch/microblaze/include/asm/bug.h b/arch/microblaze/include/asm/bug.h index 8eb2cdd..b12fd89 100644 --- a/arch/microblaze/include/asm/bug.h +++ b/arch/microblaze/include/asm/bug.h @@ -1,15 +1 @@ -/* - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_BUG_H -#define _ASM_MICROBLAZE_BUG_H - -#include <linux/kernel.h> #include <asm-generic/bug.h> - -#endif /* _ASM_MICROBLAZE_BUG_H */ diff --git a/arch/microblaze/include/asm/bugs.h b/arch/microblaze/include/asm/bugs.h index f2c6593..61791e1 100644 --- a/arch/microblaze/include/asm/bugs.h +++ b/arch/microblaze/include/asm/bugs.h @@ -1,17 +1 @@ -/* - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_BUGS_H -#define _ASM_MICROBLAZE_BUGS_H - -static inline void check_bugs(void) -{ - /* nothing to do */ -} - -#endif /* _ASM_MICROBLAZE_BUGS_H */ +#include <asm-generic/bugs.h> diff --git a/arch/microblaze/include/asm/fb.h b/arch/microblaze/include/asm/fb.h new file mode 100644 index 0000000..3a4988e --- /dev/null +++ b/arch/microblaze/include/asm/fb.h @@ -0,0 +1 @@ +#include <asm-generic/fb.h> diff --git a/arch/microblaze/include/asm/hardirq.h b/arch/microblaze/include/asm/hardirq.h index 0f2d6b0..41e1e1a 100644 --- a/arch/microblaze/include/asm/hardirq.h +++ b/arch/microblaze/include/asm/hardirq.h @@ -9,21 +9,11 @@ #ifndef _ASM_MICROBLAZE_HARDIRQ_H #define _ASM_MICROBLAZE_HARDIRQ_H -#include <linux/cache.h> -#include <linux/irq.h> -#include <asm/irq.h> -#include <asm/current.h> -#include <linux/ptrace.h> - /* should be defined in each interrupt controller driver */ extern unsigned int get_irq(struct pt_regs *regs); -typedef struct { - unsigned int __softirq_pending; -} ____cacheline_aligned irq_cpustat_t; - +#define ack_bad_irq ack_bad_irq void ack_bad_irq(unsigned int irq); - -#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */ +#include <asm-generic/hardirq.h> #endif /* _ASM_MICROBLAZE_HARDIRQ_H */ diff --git a/arch/microblaze/include/asm/irq.h b/arch/microblaze/include/asm/irq.h index db515de..90f0505 100644 --- a/arch/microblaze/include/asm/irq.h +++ b/arch/microblaze/include/asm/irq.h @@ -10,6 +10,7 @@ #define _ASM_MICROBLAZE_IRQ_H #define NR_IRQS 32 +#include <asm-generic/irq.h> #include <linux/interrupt.h> @@ -17,11 +18,6 @@ extern unsigned int nr_irq; #define NO_IRQ (-1) -static inline int irq_canonicalize(int irq) -{ - return irq; -} - struct pt_regs; extern void do_IRQ(struct pt_regs *regs); diff --git a/arch/microblaze/include/asm/mmu.h b/arch/microblaze/include/asm/mmu.h index 66cad6a..8d6a654 100644 --- a/arch/microblaze/include/asm/mmu.h +++ b/arch/microblaze/include/asm/mmu.h @@ -12,12 +12,7 @@ #define _ASM_MICROBLAZE_MMU_H # ifndef CONFIG_MMU -# ifndef __ASSEMBLY__ -typedef struct { - struct vm_list_struct *vmlist; - unsigned long end_brk; -} mm_context_t; -# endif /* __ASSEMBLY__ */ +# include <asm-generic/mmu.h> # else /* CONFIG_MMU */ # ifdef __KERNEL__ # ifndef __ASSEMBLY__ diff --git a/arch/microblaze/include/asm/mmu_context.h b/arch/microblaze/include/asm/mmu_context.h index 385fed1..24eab16 100644 --- a/arch/microblaze/include/asm/mmu_context.h +++ b/arch/microblaze/include/asm/mmu_context.h @@ -1,5 +1,5 @@ #ifdef CONFIG_MMU # include "mmu_context_mm.h" #else -# include "mmu_context_no.h" +# include <asm-generic/mmu_context.h> #endif diff --git a/arch/microblaze/include/asm/mmu_context_no.h b/arch/microblaze/include/asm/mmu_context_no.h deleted file mode 100644 index ba55671..0000000 --- a/arch/microblaze/include/asm/mmu_context_no.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu> - * Copyright (C) 2008-2009 PetaLogix - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_MMU_CONTEXT_H -#define _ASM_MICROBLAZE_MMU_CONTEXT_H - -# define init_new_context(tsk, mm) ({ 0; }) - -# define enter_lazy_tlb(mm, tsk) do {} while (0) -# define change_mm_context(old, ctx, _pml4) do {} while (0) -# define destroy_context(mm) do {} while (0) -# define deactivate_mm(tsk, mm) do {} while (0) -# define switch_mm(prev, next, tsk) do {} while (0) -# define activate_mm(prev, next) do {} while (0) - -#endif /* _ASM_MICROBLAZE_MMU_CONTEXT_H */ diff --git a/arch/microblaze/include/asm/module.h b/arch/microblaze/include/asm/module.h index 914565a..7be1347 100644 --- a/arch/microblaze/include/asm/module.h +++ b/arch/microblaze/include/asm/module.h @@ -9,6 +9,8 @@ #ifndef _ASM_MICROBLAZE_MODULE_H #define _ASM_MICROBLAZE_MODULE_H +#include <asm-generic/module.h> + /* Microblaze Relocations */ #define R_MICROBLAZE_NONE 0 #define R_MICROBLAZE_32 1 @@ -24,14 +26,6 @@ /* Keep this the last entry. */ #define R_MICROBLAZE_NUM 11 -struct mod_arch_specific { - int foo; -}; - -#define Elf_Shdr Elf32_Shdr -#define Elf_Sym Elf32_Sym -#define Elf_Ehdr Elf32_Ehdr - typedef struct { volatile int counter; } module_t; #endif /* _ASM_MICROBLAZE_MODULE_H */ diff --git a/arch/microblaze/include/asm/parport.h b/arch/microblaze/include/asm/parport.h new file mode 100644 index 0000000..cf252af --- /dev/null +++ b/arch/microblaze/include/asm/parport.h @@ -0,0 +1 @@ +#include <asm-generic/parport.h> diff --git a/arch/microblaze/include/asm/pci.h b/arch/microblaze/include/asm/pci.h index ca03794..9f0df5f 100644 --- a/arch/microblaze/include/asm/pci.h +++ b/arch/microblaze/include/asm/pci.h @@ -1 +1 @@ -#include <linux/io.h> +#include <asm-generic/pci.h> diff --git a/arch/microblaze/include/asm/scatterlist.h b/arch/microblaze/include/asm/scatterlist.h index 08ff1d0..35d786f 100644 --- a/arch/microblaze/include/asm/scatterlist.h +++ b/arch/microblaze/include/asm/scatterlist.h @@ -1,28 +1 @@ -/* - * Copyright (C) 2008 Michal Simek <monstr@monstr.eu> - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_SCATTERLIST_H -#define _ASM_MICROBLAZE_SCATTERLIST_H - -struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif - unsigned long page_link; - dma_addr_t dma_address; - unsigned int offset; - unsigned int length; -}; - -#define sg_dma_address(sg) ((sg)->dma_address) -#define sg_dma_len(sg) ((sg)->length) - -#define ISA_DMA_THRESHOLD (~0UL) - -#endif /* _ASM_MICROBLAZE_SCATTERLIST_H */ +#include <asm-generic/scatterlist.h> diff --git a/arch/microblaze/include/asm/serial.h b/arch/microblaze/include/asm/serial.h index 39bfc8c..a0cb0caf 100644 --- a/arch/microblaze/include/asm/serial.h +++ b/arch/microblaze/include/asm/serial.h @@ -1,14 +1 @@ -/* - * Copyright (C) 2009 Michal Simek <monstr@monstr.eu> - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_SERIAL_H -#define _ASM_MICROBLAZE_SERIAL_H - -# define BASE_BAUD (1843200 / 16) - -#endif /* _ASM_MICROBLAZE_SERIAL_H */ +#include <asm-generic/serial.h> diff --git a/arch/microblaze/include/asm/shmparam.h b/arch/microblaze/include/asm/shmparam.h index 9f5fc2b..93f30de 100644 --- a/arch/microblaze/include/asm/shmparam.h +++ b/arch/microblaze/include/asm/shmparam.h @@ -1,6 +1 @@ -#ifndef _ASM_MICROBLAZE_SHMPARAM_H -#define _ASM_MICROBLAZE_SHMPARAM_H - -#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */ - -#endif /* _ASM_MICROBLAZE_SHMPARAM_H */ +#include <asm-generic/shmparam.h> diff --git a/arch/microblaze/include/asm/system.h b/arch/microblaze/include/asm/system.h index c4e3088..b1ed615 100644 --- a/arch/microblaze/include/asm/system.h +++ b/arch/microblaze/include/asm/system.h @@ -13,6 +13,9 @@ #include <asm/setup.h> #include <asm/irqflags.h> +#include <asm-generic/cmpxchg.h> +#include <asm-generic/cmpxchg-local.h> + struct task_struct; struct thread_info; diff --git a/arch/microblaze/include/asm/timex.h b/arch/microblaze/include/asm/timex.h index 678525d..befcf3d 100644 --- a/arch/microblaze/include/asm/timex.h +++ b/arch/microblaze/include/asm/timex.h @@ -9,10 +9,8 @@ #ifndef _ASM_MICROBLAZE_TIMEX_H #define _ASM_MICROBLAZE_TIMEX_H -#define CLOCK_TICK_RATE 1000 /* Timer input freq. */ - -typedef unsigned long cycles_t; +#include <asm-generic/timex.h> -#define get_cycles() (0) +#define CLOCK_TICK_RATE 1000 /* Timer input freq. */ #endif /* _ASM_TIMEX_H */ diff --git a/arch/microblaze/include/asm/vga.h b/arch/microblaze/include/asm/vga.h index 8b13789..89d82fd 100644 --- a/arch/microblaze/include/asm/vga.h +++ b/arch/microblaze/include/asm/vga.h @@ -1 +1 @@ - +#include <asm-generic/vga.h> -- cgit v1.1 From 3183e06863f49a500fc76427db4d60825a26f81b Mon Sep 17 00:00:00 2001 From: Arnd Bergmann <arnd@arndb.de> Date: Thu, 18 Jun 2009 19:55:29 +0200 Subject: microblaze: clean up signal handling When legacy signal handling is disabled, the arch/microblaze/kernel/signal.c implementation can be much simpler, as most of it is handled generically from kernel/signal.c. This is also a prerequisite for using the generic asm/unistd.h, which does not provide __NR_sigreturn, because this macro is referenced by the current signal.c implementation. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michal Simek <monstr@monstr.eu> --- arch/microblaze/include/asm/signal.h | 166 +------------------------------ arch/microblaze/include/asm/syscalls.h | 11 +-- arch/microblaze/include/asm/unistd.h | 2 +- arch/microblaze/kernel/entry-nommu.S | 8 -- arch/microblaze/kernel/entry.S | 23 ----- arch/microblaze/kernel/signal.c | 172 +++++++-------------------------- arch/microblaze/kernel/syscall_table.S | 6 +- 7 files changed, 43 insertions(+), 345 deletions(-) (limited to 'arch') diff --git a/arch/microblaze/include/asm/signal.h b/arch/microblaze/include/asm/signal.h index 46bc226..7b1573c 100644 --- a/arch/microblaze/include/asm/signal.h +++ b/arch/microblaze/include/asm/signal.h @@ -1,165 +1 @@ -/* - * Copyright (C) 2006 Atmark Techno, Inc. - * Yasushi SHOJI <yashi@atmark-techno.com> - * Tetsuya OHKAWA <tetsuya@atmark-techno.com> - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_SIGNAL_H -#define _ASM_MICROBLAZE_SIGNAL_H - -#define SIGHUP 1 -#define SIGINT 2 -#define SIGQUIT 3 -#define SIGILL 4 -#define SIGTRAP 5 -#define SIGABRT 6 -#define SIGIOT 6 -#define SIGBUS 7 -#define SIGFPE 8 -#define SIGKILL 9 -#define SIGUSR1 10 -#define SIGSEGV 11 -#define SIGUSR2 12 -#define SIGPIPE 13 -#define SIGALRM 14 -#define SIGTERM 15 -#define SIGSTKFLT 16 -#define SIGCHLD 17 -#define SIGCONT 18 -#define SIGSTOP 19 -#define SIGTSTP 20 -#define SIGTTIN 21 -#define SIGTTOU 22 -#define SIGURG 23 -#define SIGXCPU 24 -#define SIGXFSZ 25 -#define SIGVTALRM 26 -#define SIGPROF 27 -#define SIGWINCH 28 -#define SIGIO 29 -#define SIGPOLL SIGIO -/* -#define SIGLOST 29 -*/ -#define SIGPWR 30 -#define SIGSYS 31 -#define SIGUNUSED 31 - -/* These should not be considered constants from userland. */ -#define SIGRTMIN 32 -#define SIGRTMAX _NSIG - -/* - * SA_FLAGS values: - * - * SA_ONSTACK indicates that a registered stack_t will be used. - * SA_RESTART flag to get restarting signals (which were the default long ago) - * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. - * SA_RESETHAND clears the handler when the signal is delivered. - * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. - * SA_NODEFER prevents the current signal from being masked in the handler. - * - * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single - * Unix names RESETHAND and NODEFER respectively. - */ -#define SA_NOCLDSTOP 0x00000001 -#define SA_NOCLDWAIT 0x00000002 -#define SA_SIGINFO 0x00000004 -#define SA_ONSTACK 0x08000000 -#define SA_RESTART 0x10000000 -#define SA_NODEFER 0x40000000 -#define SA_RESETHAND 0x80000000 - -#define SA_NOMASK SA_NODEFER -#define SA_ONESHOT SA_RESETHAND - -#define SA_RESTORER 0x04000000 - -/* - * sigaltstack controls - */ -#define SS_ONSTACK 1 -#define SS_DISABLE 2 - -#define MINSIGSTKSZ 2048 -#define SIGSTKSZ 8192 - -# ifndef __ASSEMBLY__ -# include <linux/types.h> -# include <asm-generic/signal-defs.h> - -/* Avoid too many header ordering problems. */ -struct siginfo; - -# ifdef __KERNEL__ -/* - * Most things should be clean enough to redefine this at will, if care - * is taken to make libc match. - */ -# define _NSIG 64 -# define _NSIG_BPW 32 -# define _NSIG_WORDS (_NSIG / _NSIG_BPW) - -typedef unsigned long old_sigset_t; /* at least 32 bits */ - -typedef struct { - unsigned long sig[_NSIG_WORDS]; -} sigset_t; - -struct old_sigaction { - __sighandler_t sa_handler; - old_sigset_t sa_mask; - unsigned long sa_flags; - void (*sa_restorer)(void); -}; - -struct sigaction { - __sighandler_t sa_handler; - unsigned long sa_flags; - void (*sa_restorer)(void); - sigset_t sa_mask; /* mask last for extensibility */ -}; - -struct k_sigaction { - struct sigaction sa; -}; - -# include <asm/sigcontext.h> -# undef __HAVE_ARCH_SIG_BITOPS - -# define ptrace_signal_deliver(regs, cookie) do { } while (0) - -# else /* !__KERNEL__ */ - -/* Here we must cater to libcs that poke about in kernel headers. */ - -# define NSIG 32 -typedef unsigned long sigset_t; - -struct sigaction { - union { - __sighandler_t _sa_handler; - void (*_sa_sigaction)(int, struct siginfo *, void *); - } _u; - sigset_t sa_mask; - unsigned long sa_flags; - void (*sa_restorer)(void); -}; - -# define sa_handler _u._sa_handler -# define sa_sigaction _u._sa_sigaction - -# endif /* __KERNEL__ */ - -typedef struct sigaltstack { - void *ss_sp; - int ss_flags; - size_t ss_size; -} stack_t; - -# endif /* __ASSEMBLY__ */ -#endif /* _ASM_MICROBLAZE_SIGNAL_H */ +#include <asm-generic/signal.h> diff --git a/arch/microblaze/include/asm/syscalls.h b/arch/microblaze/include/asm/syscalls.h index ddea9eb..ea23843 100644 --- a/arch/microblaze/include/asm/syscalls.h +++ b/arch/microblaze/include/asm/syscalls.h @@ -26,23 +26,16 @@ asmlinkage unsigned long sys_mmap(unsigned long addr, size_t len, unsigned long fd, off_t offset); /* from signal.c */ -asmlinkage int sys_sigsuspend(old_sigset_t mask, struct pt_regs *regs); - -asmlinkage int sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize, +asmlinkage long sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize, struct pt_regs *regs); -asmlinkage int sys_sigaction(int sig, const struct old_sigaction *act, - struct old_sigaction *oact); - asmlinkage long sys_rt_sigaction(int sig, const struct sigaction __user *act, struct sigaction __user *oact, size_t sigsetsize); asmlinkage int sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss, struct pt_regs *regs); -asmlinkage int sys_sigreturn(struct pt_regs *regs); - -asmlinkage int sys_rt_sigreturn(struct pt_regs *regs); +asmlinkage long sys_rt_sigreturn(struct pt_regs *regs); #endif /* __KERNEL__ */ #endif /* __ASM_MICROBLAZE_SYSCALLS_H */ diff --git a/arch/microblaze/include/asm/unistd.h b/arch/microblaze/include/asm/unistd.h index b5e2f5f..6c660c1 100644 --- a/arch/microblaze/include/asm/unistd.h +++ b/arch/microblaze/include/asm/unistd.h @@ -408,7 +408,7 @@ #define __ARCH_WANT_SYS_SIGPENDING #define __ARCH_WANT_SYS_SIGPROCMASK #define __ARCH_WANT_SYS_RT_SIGACTION -/* #define __ARCH_WANT_SYS_RT_SIGSUSPEND */ +#define __ARCH_WANT_SYS_RT_SIGSUSPEND /* * "Conditional" syscalls diff --git a/arch/microblaze/kernel/entry-nommu.S b/arch/microblaze/kernel/entry-nommu.S index 1fce6b8..2eaf394 100644 --- a/arch/microblaze/kernel/entry-nommu.S +++ b/arch/microblaze/kernel/entry-nommu.S @@ -563,18 +563,10 @@ sys_execve_wrapper: brid sys_execve addk r8, r1, r0 -sys_sigreturn_wrapper: - brid sys_sigreturn - addk r5, r1, r0 - sys_rt_sigreturn_wrapper: brid sys_rt_sigreturn addk r5, r1, r0 -sys_sigsuspend_wrapper: - brid sys_rt_sigsuspend - addk r6, r1, r0 - sys_rt_sigsuspend_wrapper: brid sys_rt_sigsuspend addk r7, r1, r0 diff --git a/arch/microblaze/kernel/entry.S b/arch/microblaze/kernel/entry.S index 91a0e7b..ea71076 100644 --- a/arch/microblaze/kernel/entry.S +++ b/arch/microblaze/kernel/entry.S @@ -449,17 +449,6 @@ C_ENTRY(sys_execve_wrapper): brid sys_execve; /* Do real work (tail-call).*/ nop; -C_ENTRY(sys_sigsuspend_wrapper): - swi r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */ - swi r4, r1, PTO+PT_R4; - la r6, r1, PTO; /* add user context as 2nd arg */ - bralid r15, sys_sigsuspend; /* Do real work.*/ - nop; - lwi r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */ - lwi r4, r1, PTO+PT_R4; - bri ret_from_trap /* fall through will not work here due to align */ - nop; - C_ENTRY(sys_rt_sigsuspend_wrapper): swi r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */ swi r4, r1, PTO+PT_R4; @@ -471,18 +460,6 @@ C_ENTRY(sys_rt_sigsuspend_wrapper): bri ret_from_trap /* fall through will not work here due to align */ nop; - -C_ENTRY(sys_sigreturn_wrapper): - swi r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */ - swi r4, r1, PTO+PT_R4; - la r5, r1, PTO; /* add user context as 1st arg */ - brlid r15, sys_sigreturn; /* Do real work.*/ - nop; - lwi r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */ - lwi r4, r1, PTO+PT_R4; - bri ret_from_trap /* fall through will not work here due to align */ - nop; - C_ENTRY(sys_rt_sigreturn_wrapper): swi r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */ swi r4, r1, PTO+PT_R4; diff --git a/arch/microblaze/kernel/signal.c b/arch/microblaze/kernel/signal.c index 4c0e652..2e5862c 100644 --- a/arch/microblaze/kernel/signal.c +++ b/arch/microblaze/kernel/signal.c @@ -45,89 +45,6 @@ asmlinkage int do_signal(struct pt_regs *regs, sigset_t *oldset, int in_sycall); -/* - * Atomically swap in the new signal mask, and wait for a signal. - */ -asmlinkage int -sys_sigsuspend(old_sigset_t mask, struct pt_regs *regs) -{ - sigset_t saveset; - - mask &= _BLOCKABLE; - spin_lock_irq(¤t->sighand->siglock); - saveset = current->blocked; - siginitset(¤t->blocked, mask); - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); - - regs->r3 = -EINTR; - while (1) { - current->state = TASK_INTERRUPTIBLE; - schedule(); - if (do_signal(regs, &saveset, 1)) - return -EINTR; - } -} - -asmlinkage int -sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize, - struct pt_regs *regs) -{ - sigset_t saveset, newset; - - /* XXX: Don't preclude handling different sized sigset_t's. */ - if (sigsetsize != sizeof(sigset_t)) - return -EINVAL; - - if (copy_from_user(&newset, unewset, sizeof(newset))) - return -EFAULT; - sigdelsetmask(&newset, ~_BLOCKABLE); - spin_lock_irq(¤t->sighand->siglock); - saveset = current->blocked; - current->blocked = newset; - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); - - regs->r3 = -EINTR; - while (1) { - current->state = TASK_INTERRUPTIBLE; - schedule(); - if (do_signal(regs, &saveset, 1)) - return -EINTR; - } -} - -asmlinkage int -sys_sigaction(int sig, const struct old_sigaction *act, - struct old_sigaction *oact) -{ - struct k_sigaction new_ka, old_ka; - int ret; - - if (act) { - old_sigset_t mask; - if (!access_ok(VERIFY_READ, act, sizeof(*act)) || - __get_user(new_ka.sa.sa_handler, &act->sa_handler) || - __get_user(new_ka.sa.sa_restorer, &act->sa_restorer)) - return -EFAULT; - __get_user(new_ka.sa.sa_flags, &act->sa_flags); - __get_user(mask, &act->sa_mask); - siginitset(&new_ka.sa.sa_mask, mask); - } - - ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL); - - if (!ret && oact) { - if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) || - __put_user(old_ka.sa.sa_handler, &oact->sa_handler) || - __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer)) - return -EFAULT; - __put_user(old_ka.sa.sa_flags, &oact->sa_flags); - __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask); - } - - return ret; -} asmlinkage int sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss, @@ -139,7 +56,6 @@ sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss, /* * Do a signal return; undo the signal stack. */ - struct sigframe { struct sigcontext sc; unsigned long extramask[_NSIG_WORDS-1]; @@ -176,40 +92,7 @@ static int restore_sigcontext(struct pt_regs *regs, return err; } -asmlinkage int sys_sigreturn(struct pt_regs *regs) -{ - struct sigframe *frame = - (struct sigframe *)(regs->r1 + STATE_SAVE_ARG_SPACE); - - sigset_t set; - int rval; - - if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) - goto badframe; - - if (__get_user(set.sig[0], &frame->sc.oldmask) - || (_NSIG_WORDS > 1 - && __copy_from_user(&set.sig[1], &frame->extramask, - sizeof(frame->extramask)))) - goto badframe; - - sigdelsetmask(&set, ~_BLOCKABLE); - - spin_lock_irq(¤t->sighand->siglock); - current->blocked = set; - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); - - if (restore_sigcontext(regs, &frame->sc, &rval)) - goto badframe; - return rval; - -badframe: - force_sig(SIGSEGV, current); - return 0; -} - -asmlinkage int sys_rt_sigreturn(struct pt_regs *regs) +asmlinkage long sys_rt_sigreturn(struct pt_regs *regs) { struct rt_sigframe __user *frame = (struct rt_sigframe __user *)(regs->r1 + STATE_SAVE_ARG_SPACE); @@ -324,21 +207,17 @@ static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, /* Set up to return from userspace. If provided, use a stub already in userspace. */ /* minus 8 is offset to cater for "rtsd r15,8" */ - if (ka->sa.sa_flags & SA_RESTORER) { - regs->r15 = ((unsigned long)ka->sa.sa_restorer)-8; - } else { - /* addi r12, r0, __NR_sigreturn */ - err |= __put_user(0x31800000 | __NR_rt_sigreturn , - frame->tramp + 0); - /* brki r14, 0x8 */ - err |= __put_user(0xb9cc0008, frame->tramp + 1); - - /* Return from sighandler will jump to the tramp. - Negative 8 offset because return is rtsd r15, 8 */ - regs->r15 = ((unsigned long)frame->tramp)-8; - - __invalidate_cache_sigtramp((unsigned long)frame->tramp); - } + /* addi r12, r0, __NR_sigreturn */ + err |= __put_user(0x31800000 | __NR_rt_sigreturn , + frame->tramp + 0); + /* brki r14, 0x8 */ + err |= __put_user(0xb9cc0008, frame->tramp + 1); + + /* Return from sighandler will jump to the tramp. + Negative 8 offset because return is rtsd r15, 8 */ + regs->r15 = ((unsigned long)frame->tramp)-8; + + __invalidate_cache_sigtramp((unsigned long)frame->tramp); if (err) goto give_sigsegv; @@ -405,7 +284,7 @@ do_restart: * OK, we're invoking a handler */ -static void +static int handle_signal(unsigned long sig, struct k_sigaction *ka, siginfo_t *info, sigset_t *oldset, struct pt_regs *regs) { @@ -426,6 +305,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka, recalc_sigpending(); spin_unlock_irq(¤t->sighand->siglock); } + return 1; } /* @@ -456,7 +336,9 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset, int in_syscall) if (kernel_mode(regs)) return 1; - if (!oldset) + if (current_thread_info()->status & TS_RESTORE_SIGMASK) + oldset = ¤t->saved_sigmask; + else oldset = ¤t->blocked; signr = get_signal_to_deliver(&info, &ka, regs, NULL); @@ -464,13 +346,31 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset, int in_syscall) /* Whee! Actually deliver the signal. */ if (in_syscall) handle_restart(regs, &ka, 1); - handle_signal(signr, &ka, &info, oldset, regs); + if (handle_signal(signr, &ka, &info, oldset, regs)) { + /* + * A signal was successfully delivered; the saved + * sigmask will have been stored in the signal frame, + * and will be restored by sigreturn, so we can simply + * clear the TS_RESTORE_SIGMASK flag. + */ + current_thread_info()->status &= + ~TS_RESTORE_SIGMASK; + } return 1; } if (in_syscall) handle_restart(regs, NULL, 0); + /* + * If there's no signal to deliver, we just put the saved sigmask + * back. + */ + if (current_thread_info()->status & TS_RESTORE_SIGMASK) { + current_thread_info()->status &= ~TS_RESTORE_SIGMASK; + sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL); + } + /* Did we come from a system call? */ return 0; } diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S index 376d178..ef0e893 100644 --- a/arch/microblaze/kernel/syscall_table.S +++ b/arch/microblaze/kernel/syscall_table.S @@ -71,12 +71,12 @@ ENTRY(sys_call_table) .long sys_getppid .long sys_getpgrp /* 65 */ .long sys_setsid - .long sys_sigaction + .long sys_ni_syscall /* sys_sigaction */ .long sys_sgetmask .long sys_ssetmask .long sys_setreuid /* 70 */ .long sys_setregid - .long sys_sigsuspend_wrapper + .long sys_ni_syscall /* sys_sigsuspend_wrapper */ .long sys_sigpending .long sys_sethostname .long sys_setrlimit /* 75 */ @@ -123,7 +123,7 @@ ENTRY(sys_call_table) .long sys_sysinfo .long sys_ipc .long sys_fsync - .long sys_sigreturn_wrapper + .long sys_ni_syscall /* sys_sigreturn_wrapper */ .long sys_clone_wrapper /* 120 */ .long sys_setdomainname .long sys_newuname -- cgit v1.1 From e513588f75912f022677866244de6b19b98b8d9a Mon Sep 17 00:00:00 2001 From: Arnd Bergmann <arnd@arndb.de> Date: Thu, 18 Jun 2009 19:55:30 +0200 Subject: microblaze: use generic syscalls.h The prototypes in syscalls.h all make sense for microblaze, but for some of them, the actual implementation in sys_microblaze.c needs to be adapted. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michal Simek <monstr@monstr.eu> --- arch/microblaze/include/asm/syscalls.h | 39 +++------------------------------ arch/microblaze/kernel/entry-nommu.S | 12 +++++----- arch/microblaze/kernel/entry.S | 11 +++++----- arch/microblaze/kernel/signal.c | 2 +- arch/microblaze/kernel/sys_microblaze.c | 20 ++++++++--------- arch/microblaze/kernel/syscall_table.S | 6 ++--- 6 files changed, 28 insertions(+), 62 deletions(-) (limited to 'arch') diff --git a/arch/microblaze/include/asm/syscalls.h b/arch/microblaze/include/asm/syscalls.h index ea23843..720761c 100644 --- a/arch/microblaze/include/asm/syscalls.h +++ b/arch/microblaze/include/asm/syscalls.h @@ -1,41 +1,8 @@ #ifndef __ASM_MICROBLAZE_SYSCALLS_H -#define __ASM_MICROBLAZE_SYSCALLS_H -#ifdef __KERNEL__ -#include <linux/compiler.h> -#include <linux/linkage.h> -#include <linux/types.h> -#include <linux/signal.h> +asmlinkage long sys_clone(int flags, unsigned long stack, struct pt_regs *regs); +#define sys_clone sys_clone -/* FIXME will be removed */ -asmlinkage int sys_ipc(uint call, int first, int second, - int third, void *ptr, long fifth); +#include <asm-generic/syscalls.h> -struct pt_regs; -asmlinkage int sys_vfork(struct pt_regs *regs); -asmlinkage int sys_clone(int flags, unsigned long stack, struct pt_regs *regs); -asmlinkage int sys_execve(char __user *filenamei, char __user *__user *argv, - char __user *__user *envp, struct pt_regs *regs); - -asmlinkage unsigned long sys_mmap2(unsigned long addr, size_t len, - unsigned long prot, unsigned long flags, - unsigned long fd, unsigned long pgoff); - -asmlinkage unsigned long sys_mmap(unsigned long addr, size_t len, - unsigned long prot, unsigned long flags, - unsigned long fd, off_t offset); - -/* from signal.c */ -asmlinkage long sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize, - struct pt_regs *regs); - -asmlinkage long sys_rt_sigaction(int sig, const struct sigaction __user *act, - struct sigaction __user *oact, size_t sigsetsize); - -asmlinkage int sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss, - struct pt_regs *regs); - -asmlinkage long sys_rt_sigreturn(struct pt_regs *regs); - -#endif /* __KERNEL__ */ #endif /* __ASM_MICROBLAZE_SYSCALLS_H */ diff --git a/arch/microblaze/kernel/entry-nommu.S b/arch/microblaze/kernel/entry-nommu.S index 2eaf394..9083d85 100644 --- a/arch/microblaze/kernel/entry-nommu.S +++ b/arch/microblaze/kernel/entry-nommu.S @@ -551,16 +551,16 @@ no_work_pending: rtid r14, 0 nop -sys_vfork_wrapper: - brid sys_vfork +sys_vfork: + brid microblaze_vfork addk r5, r1, r0 -sys_clone_wrapper: - brid sys_clone +sys_clone: + brid microblaze_clone addk r7, r1, r0 -sys_execve_wrapper: - brid sys_execve +sys_execve: + brid microblaze_execve addk r8, r1, r0 sys_rt_sigreturn_wrapper: diff --git a/arch/microblaze/kernel/entry.S b/arch/microblaze/kernel/entry.S index ea71076..c7353e7 100644 --- a/arch/microblaze/kernel/entry.S +++ b/arch/microblaze/kernel/entry.S @@ -429,12 +429,11 @@ C_ENTRY(ret_from_fork): brid ret_from_trap; /* Do normal trap return */ nop; -C_ENTRY(sys_vfork_wrapper): +C_ENTRY(sys_vfork): + brid microblaze_vfork /* Do real work (tail-call) */ la r5, r1, PTO - brid sys_vfork /* Do real work (tail-call) */ - nop -C_ENTRY(sys_clone_wrapper): +C_ENTRY(sys_clone): bnei r6, 1f; /* See if child SP arg (arg 1) is 0. */ lwi r6, r1, PTO+PT_R1; /* If so, use paret's stack ptr */ 1: la r7, r1, PTO; /* Arg 2: parent context */ @@ -444,9 +443,9 @@ C_ENTRY(sys_clone_wrapper): brid do_fork /* Do real work (tail-call) */ nop; -C_ENTRY(sys_execve_wrapper): +C_ENTRY(sys_execve): la r8, r1, PTO; /* add user context as 4th arg */ - brid sys_execve; /* Do real work (tail-call).*/ + brid microblaze_execve; /* Do real work (tail-call).*/ nop; C_ENTRY(sys_rt_sigsuspend_wrapper): diff --git a/arch/microblaze/kernel/signal.c b/arch/microblaze/kernel/signal.c index 2e5862c..493819c 100644 --- a/arch/microblaze/kernel/signal.c +++ b/arch/microblaze/kernel/signal.c @@ -46,7 +46,7 @@ asmlinkage int do_signal(struct pt_regs *regs, sigset_t *oldset, int in_sycall); -asmlinkage int +asmlinkage long sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss, struct pt_regs *regs) { diff --git a/arch/microblaze/kernel/sys_microblaze.c b/arch/microblaze/kernel/sys_microblaze.c index 31905ff..8c9ebac 100644 --- a/arch/microblaze/kernel/sys_microblaze.c +++ b/arch/microblaze/kernel/sys_microblaze.c @@ -39,7 +39,7 @@ * * This is really horribly ugly. This will be remove with new toolchain. */ -asmlinkage int +asmlinkage long sys_ipc(uint call, int first, int second, int third, void *ptr, long fifth) { int version, ret; @@ -134,20 +134,20 @@ sys_ipc(uint call, int first, int second, int third, void *ptr, long fifth) return ret; } -asmlinkage int sys_vfork(struct pt_regs *regs) +asmlinkage long microblaze_vfork(struct pt_regs *regs) { return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, regs->r1, regs, 0, NULL, NULL); } -asmlinkage int sys_clone(int flags, unsigned long stack, struct pt_regs *regs) +asmlinkage long microblaze_clone(int flags, unsigned long stack, struct pt_regs *regs) { if (!stack) stack = regs->r1; return do_fork(flags, stack, regs, 0, NULL, NULL); } -asmlinkage int sys_execve(char __user *filenamei, char __user *__user *argv, +asmlinkage long microblaze_execve(char __user *filenamei, char __user *__user *argv, char __user *__user *envp, struct pt_regs *regs) { int error; @@ -163,8 +163,8 @@ out: return error; } -asmlinkage unsigned long -sys_mmap2(unsigned long addr, size_t len, +asmlinkage long +sys_mmap2(unsigned long addr, unsigned long len, unsigned long prot, unsigned long flags, unsigned long fd, unsigned long pgoff) { @@ -189,18 +189,18 @@ out: return ret; } -asmlinkage unsigned long sys_mmap(unsigned long addr, size_t len, +asmlinkage long sys_mmap(unsigned long addr, unsigned long len, unsigned long prot, unsigned long flags, - unsigned long fd, off_t offset) + unsigned long fd, off_t pgoff) { int err = -EINVAL; - if (offset & ~PAGE_MASK) { + if (pgoff & ~PAGE_MASK) { printk(KERN_INFO "no pagemask in mmap\r\n"); goto out; } - err = sys_mmap2(addr, len, prot, flags, fd, offset >> PAGE_SHIFT); + err = sys_mmap2(addr, len, prot, flags, fd, pgoff >> PAGE_SHIFT); out: return err; } diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S index ef0e893..8a60935 100644 --- a/arch/microblaze/kernel/syscall_table.S +++ b/arch/microblaze/kernel/syscall_table.S @@ -15,7 +15,7 @@ ENTRY(sys_call_table) .long sys_creat .long sys_link .long sys_unlink /* 10 */ - .long sys_execve_wrapper + .long sys_execve .long sys_chdir .long sys_time .long sys_mknod @@ -124,7 +124,7 @@ ENTRY(sys_call_table) .long sys_ipc .long sys_fsync .long sys_ni_syscall /* sys_sigreturn_wrapper */ - .long sys_clone_wrapper /* 120 */ + .long sys_clone /* 120 */ .long sys_setdomainname .long sys_newuname .long sys_ni_syscall /* modify_ldt */ @@ -194,7 +194,7 @@ ENTRY(sys_call_table) .long sys_sendfile .long sys_ni_syscall /* reserved for streams1 */ .long sys_ni_syscall /* reserved for streams2 */ - .long sys_vfork_wrapper /* 190 */ + .long sys_vfork /* 190 */ .long sys_getrlimit .long sys_mmap2 /* mmap2 */ .long sys_truncate64 -- cgit v1.1 From 4ae78338157a1fe2d7a398d86bb9f9043d600d2b Mon Sep 17 00:00:00 2001 From: Michal Simek <monstr@monstr.eu> Date: Wed, 1 Jul 2009 15:32:14 +0200 Subject: microblaze: Wire up new syscalls Wire up new syscalls rt_tgsigqueueinfo and perf_counter_open. Signed-off-by: Michal Simek <monstr@monstr.eu> --- arch/microblaze/include/asm/unistd.h | 4 +++- arch/microblaze/kernel/syscall_table.S | 2 ++ 2 files changed, 5 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/microblaze/include/asm/unistd.h b/arch/microblaze/include/asm/unistd.h index 6c660c1..0b85232 100644 --- a/arch/microblaze/include/asm/unistd.h +++ b/arch/microblaze/include/asm/unistd.h @@ -380,8 +380,10 @@ #define __NR_accept04 362 /* new */ #define __NR_preadv 363 /* new */ #define __NR_pwritev 364 /* new */ +#define __NR_rt_tgsigqueueinfo 365 /* new */ +#define __NR_perf_counter_open 366 /* new */ -#define __NR_syscalls 365 +#define __NR_syscalls 367 #ifdef __KERNEL__ #ifndef __ASSEMBLY__ diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S index 8a60935..31b32a6 100644 --- a/arch/microblaze/kernel/syscall_table.S +++ b/arch/microblaze/kernel/syscall_table.S @@ -369,3 +369,5 @@ ENTRY(sys_call_table) .long sys_ni_syscall .long sys_ni_syscall .long sys_ni_syscall + .long sys_rt_tgsigqueueinfo /* 365 */ + .long sys_perf_counter_open -- cgit v1.1 From db6e3f91efd2cf61b9965f722902199cf54adc4f Mon Sep 17 00:00:00 2001 From: Michal Simek <monstr@monstr.eu> Date: Mon, 6 Jul 2009 08:21:09 +0200 Subject: microblaze: Fix cast warning for init.c Signed-off-by: Michal Simek <monstr@monstr.eu> --- arch/microblaze/mm/init.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/microblaze/mm/init.c b/arch/microblaze/mm/init.c index b5a701c..8d92c4e 100644 --- a/arch/microblaze/mm/init.c +++ b/arch/microblaze/mm/init.c @@ -80,15 +80,15 @@ void __init setup_memory(void) memory_size = memory_end - memory_start; PAGE_OFFSET = memory_start; printk(KERN_INFO "%s: Main mem: 0x%x-0x%x, " - "size 0x%08x\n", __func__, memory_start, - memory_end, memory_size); + "size 0x%08x\n", __func__, (u32) memory_start, + (u32) memory_end, (u32) memory_size); break; } } if (!memory_start || !memory_end) { panic("%s: Missing memory setting 0x%08x-0x%08x\n", - __func__, memory_start, memory_end); + __func__, (u32) memory_start, (u32) memory_end); } /* reservation of region where is the kernel */ -- cgit v1.1 From 22fe84394f405c673b362d23dcc2d5d095ab5f6c Mon Sep 17 00:00:00 2001 From: Mike Rapoport <mike@compulab.co.il> Date: Mon, 6 Jul 2009 08:56:51 +0300 Subject: [ARM] pxa: fix ULPI_{DIR,NXT,STP} MFP defines Attepmpt to configure ULPI pins gives the following compile error: CC arch/arm/mach-pxa/cm-x300.o arch/arm/mach-pxa/cm-x300.c:155: error: 'MFP_MFP_AF0' undeclared here (not in a function) arch/arm/mach-pxa/cm-x300.c:155: error: 'MFP_MFP_DS01X' undeclared here (not in a function) make[2]: *** [arch/arm/mach-pxa/cm-x300.o] Error 1 make[1]: *** [arch/arm/mach-pxa] Error 2 make: *** [sub-make] Error 2 Fix it. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com> --- arch/arm/mach-pxa/include/mach/mfp-pxa300.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa300.h b/arch/arm/mach-pxa/include/mach/mfp-pxa300.h index ae84411..7139e0d 100644 --- a/arch/arm/mach-pxa/include/mach/mfp-pxa300.h +++ b/arch/arm/mach-pxa/include/mach/mfp-pxa300.h @@ -567,9 +567,9 @@ #define GPIO37_ULPI_DATA_OUT_7 MFP_CFG(GPIO37, AF3) #define GPIO33_ULPI_OTG_INTR MFP_CFG(GPIO33, AF1) -#define ULPI_DIR MFP_CFG_DRV(ULPI_DIR, MFP_AF0, MFP_DS01X) -#define ULPI_NXT MFP_CFG_DRV(ULPI_NXT, MFP_AF0, MFP_DS01X) -#define ULPI_STP MFP_CFG_DRV(ULPI_STP, MFP_AF0, MFP_DS01X) +#define ULPI_DIR MFP_CFG_DRV(ULPI_DIR, AF0, DS01X) +#define ULPI_NXT MFP_CFG_DRV(ULPI_NXT, AF0, DS01X) +#define ULPI_STP MFP_CFG_DRV(ULPI_STP, AF0, DS01X) #endif /* CONFIG_CPU_PXA310 */ #endif /* __ASM_ARCH_MFP_PXA300_H */ -- cgit v1.1 From f386c61fe1a1f36f0e434f1b577e6b112698caf7 Mon Sep 17 00:00:00 2001 From: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Date: Sun, 5 Jul 2009 12:08:06 -0700 Subject: gcov: exclude code operating in userspace from profiling Fix for this issue on x86_64: rostedt@goodmis.org wrote: > On bootup of the latest kernel my init segfaults. Debugging it, > I found that vread_tsc (a vsyscall) increments some strange > kernel memory: > > 0000000000000000 <vread_tsc>: > 0: 55 push %rbp > 1: 48 ff 05 00 00 00 00 incq 0(%rip) > # 8 <vread_tsc+0x8> > 4: R_X86_64_PC32 .bss+0x3c > 8: 48 89 e5 mov %rsp,%rbp > b: 66 66 90 xchg %ax,%ax > e: 48 ff 05 00 00 00 00 incq 0(%rip) > # 15 <vread_tsc+0x15> > 11: R_X86_64_PC32 .bss+0x44 > 15: 66 66 90 xchg %ax,%ax > 18: 48 ff 05 00 00 00 00 incq 0(%rip) > # 1f <vread_tsc+0x1f> > 1b: R_X86_64_PC32 .bss+0x4c > 1f: 0f 31 rdtsc > > > Those "incq" is very bad to happen in vsyscall memory, since > userspace can not modify it. You need to make something prevent > profiling of vsyscall memory (like I do with ftrace). Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Reported-by: Steven Rostedt <rostedt@goodmis.org> Tested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> --- arch/x86/kernel/Makefile | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 6c327b8..430d5b2 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -26,6 +26,8 @@ CFLAGS_tsc.o := $(nostackp) CFLAGS_paravirt.o := $(nostackp) GCOV_PROFILE_vsyscall_64.o := n GCOV_PROFILE_hpet.o := n +GCOV_PROFILE_tsc.o := n +GCOV_PROFILE_paravirt.o := n obj-y := process_$(BITS).o signal.o entry_$(BITS).o obj-y += traps.o irq.o irq_$(BITS).o dumpstack_$(BITS).o -- cgit v1.1 From a2e1b4c31257c07f148a89eb7eea7ca959fd0642 Mon Sep 17 00:00:00 2001 From: Mark Langsdorf <mark.langsdorf@amd.com> Date: Sun, 26 Jul 2009 10:55:25 -0500 Subject: [CPUFREQ] Powernow-k8: support family 0xf with 2 low p-states Provide support for family 0xf processors with 2 P-states below the elevator voltage. Remove the checks that prevent this configuration from being supported and increase the transition voltage to prevent errors during the transition. Signed-off-by: Mark Langsdorf <mark.langsdorf@amd.com> Signed-off-by: Dave Jones <davej@redhat.com> --- arch/x86/kernel/cpu/cpufreq/powernow-k8.c | 30 +++++++++++------------------- arch/x86/kernel/cpu/cpufreq/powernow-k8.h | 3 ++- 2 files changed, 13 insertions(+), 20 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c index 81cbe64..ae068f5 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c @@ -299,7 +299,7 @@ static int transition_pstate(struct powernow_k8_data *data, u32 pstate) static int transition_fid_vid(struct powernow_k8_data *data, u32 reqfid, u32 reqvid) { - if (core_voltage_pre_transition(data, reqvid)) + if (core_voltage_pre_transition(data, reqvid, reqfid)) return 1; if (core_frequency_transition(data, reqfid)) @@ -327,17 +327,20 @@ static int transition_fid_vid(struct powernow_k8_data *data, /* Phase 1 - core voltage transition ... setup voltage */ static int core_voltage_pre_transition(struct powernow_k8_data *data, - u32 reqvid) + u32 reqvid, u32 reqfid) { u32 rvosteps = data->rvo; u32 savefid = data->currfid; - u32 maxvid, lo; + u32 maxvid, lo, rvomult = 1; dprintk("ph1 (cpu%d): start, currfid 0x%x, currvid 0x%x, " "reqvid 0x%x, rvo 0x%x\n", smp_processor_id(), data->currfid, data->currvid, reqvid, data->rvo); + if ((savefid < LO_FID_TABLE_TOP) && (reqfid < LO_FID_TABLE_TOP)) + rvomult = 2; + rvosteps *= rvomult; rdmsr(MSR_FIDVID_STATUS, lo, maxvid); maxvid = 0x1f & (maxvid >> 16); dprintk("ph1 maxvid=0x%x\n", maxvid); @@ -351,7 +354,8 @@ static int core_voltage_pre_transition(struct powernow_k8_data *data, return 1; } - while ((rvosteps > 0) && ((data->rvo + data->currvid) > reqvid)) { + while ((rvosteps > 0) && + ((rvomult * data->rvo + data->currvid) > reqvid)) { if (data->currvid == maxvid) { rvosteps = 0; } else { @@ -384,13 +388,6 @@ static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid) u32 vcoreqfid, vcocurrfid, vcofiddiff; u32 fid_interval, savevid = data->currvid; - if ((reqfid < HI_FID_TABLE_BOTTOM) && - (data->currfid < HI_FID_TABLE_BOTTOM)) { - printk(KERN_ERR PFX "ph2: illegal lo-lo transition " - "0x%x 0x%x\n", reqfid, data->currfid); - return 1; - } - if (data->currfid == reqfid) { printk(KERN_ERR PFX "ph2 null fid transition 0x%x\n", data->currfid); @@ -407,6 +404,9 @@ static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid) vcofiddiff = vcocurrfid > vcoreqfid ? vcocurrfid - vcoreqfid : vcoreqfid - vcocurrfid; + if ((reqfid <= LO_FID_TABLE_TOP) && (data->currfid <= LO_FID_TABLE_TOP)) + vcofiddiff = 0; + while (vcofiddiff > 2) { (data->currfid & 1) ? (fid_interval = 1) : (fid_interval = 2); @@ -1081,14 +1081,6 @@ static int transition_frequency_fidvid(struct powernow_k8_data *data, return 0; } - if ((fid < HI_FID_TABLE_BOTTOM) && - (data->currfid < HI_FID_TABLE_BOTTOM)) { - printk(KERN_ERR PFX - "ignoring illegal change in lo freq table-%x to 0x%x\n", - data->currfid, fid); - return 1; - } - dprintk("cpu %d, changing to fid 0x%x, vid 0x%x\n", smp_processor_id(), fid, vid); freqs.old = find_khz_freq_from_fid(data->currfid); diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h index c9c1190..02ce824 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h @@ -215,7 +215,8 @@ struct pst_s { #define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "powernow-k8", msg) -static int core_voltage_pre_transition(struct powernow_k8_data *data, u32 reqvid); +static int core_voltage_pre_transition(struct powernow_k8_data *data, + u32 reqvid, u32 regfid); static int core_voltage_post_transition(struct powernow_k8_data *data, u32 reqvid); static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid); -- cgit v1.1 From e2ce0e718ee72e5915d35a6f4af40fa249cd626d Mon Sep 17 00:00:00 2001 From: Simon Kagstrom <simon.kagstrom@netinsight.net> Date: Tue, 30 Jun 2009 21:42:00 -0400 Subject: [ARM] Kirkwood: Correct header define Correct define typo (. -> ,) Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net> Signed-off-by: Nicolas Pitre <nico@marvell.com> --- arch/arm/mach-kirkwood/mpp.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-kirkwood/mpp.h b/arch/arm/mach-kirkwood/mpp.h index e021a80..bc74278 100644 --- a/arch/arm/mach-kirkwood/mpp.h +++ b/arch/arm/mach-kirkwood/mpp.h @@ -289,7 +289,7 @@ #define MPP48_GPIO MPP( 48, 0x0, 1, 1, 0, 0, 0, 1 ) #define MPP48_TSMP12 MPP( 48, 0x1, 1, 1, 0, 0, 0, 1 ) -#define MPP48_TDM_DTX MPP( 48. 0x2, 0, 1, 0, 0, 0, 1 ) +#define MPP48_TDM_DTX MPP( 48, 0x2, 0, 1, 0, 0, 0, 1 ) #define MPP49_GPIO MPP( 49, 0x0, 1, 1, 0, 0, 0, 1 ) #define MPP49_TSMP9 MPP( 49, 0x1, 1, 1, 0, 0, 0, 1 ) -- cgit v1.1 From bb8c29caffdda55d3df0315ff2485f7df7290b1d Mon Sep 17 00:00:00 2001 From: Heiko Carstens <heiko.carstens@de.ibm.com> Date: Tue, 7 Jul 2009 16:37:05 +0200 Subject: [S390] udelay: disable lockdep to avoid false positives Our udelay implementation enables interrupts to receive a special timer interrupt regardless of the context it is called from. This might lead to false positive lockdep reports. Since lockdep isn't aware of the fact that only a single interrupt source is enabled it warns about possible deadlocks that in reality won't happen, like the one below. To fix this disable lockdep before enabling interrupts. [ 254.040888] ================================= [ 254.040904] [ INFO: inconsistent lock state ] [ 254.040910] 2.6.30 #9 [ 254.040914] --------------------------------- [ 254.040920] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. [ 254.040927] swapper/0 [HC0[0]:SC1[1]:HE1:SE0] takes: [ 254.040934] (sch->lock){?.-...}, at: [<00000000002e4778>] ccw_device_timeout+0x48/0x2f0 [ 254.040961] {IN-HARDIRQ-W} state was registered at: [ 254.040969] [<0000000000096f74>] __lock_acquire+0x9d4/0x188c [ 254.040985] [<0000000000097f68>] lock_acquire+0x13c/0x16c [ 254.040998] [<00000000004527e0>] _spin_lock+0x74/0xb8 [ 254.041016] [<0000000000457eb2>] do_IRQ+0xde/0x208 [ 254.041031] [<000000000002d190>] io_return+0x0/0x8 [ 254.041049] [<0000000000029faa>] vtime_stop_cpu+0xbe/0x114 [ 254.041066] irq event stamp: 259629 [ 254.041076] hardirqs last enabled at (259628): [<000000000045238e>] _spin_unlock_irq+0x5e/0x9c [ 254.041095] hardirqs last disabled at (259629): [<000000000045292e>] _spin_lock_irq+0x4a/0xc4 [ 254.041126] softirqs last enabled at (259614): [<000000000006500e>] __do_softirq+0x296/0x2b0 [ 254.041137] softirqs last disabled at (259619): [<0000000000024cf6>] do_softirq+0x102/0x108 [ 254.041147] [ 254.041148] other info that might help us debug this: [ 254.041153] 2 locks held by swapper/0: [ 254.041157] #0: (&priv->timer){+.-...}, at: [<000000000006bf9a>] run_timer_softirq+0x19a/0x340 [ 254.041170] #1: (sch->lock){?.-...}, at: [<00000000002e4778>] ccw_device_timeout+0x48/0x2f0 [ 254.041182] [ 254.041310] Call Trace: [ 254.041313] ([<00000000000174fc>] show_trace+0x16c/0x170) [ 254.041321] [<0000000000017578>] show_stack+0x78/0x104 [ 254.041327] [<000000000044d0ca>] dump_stack+0xc6/0xd4 [ 254.041342] [<00000000000949b4>] print_usage_bug+0x1c8/0x1fc [ 254.041353] [<0000000000094e8a>] mark_lock+0x4a2/0x670 [ 254.041364] [<00000000000950e2>] mark_held_locks+0x8a/0xb4 [ 254.041375] [<0000000000095398>] trace_hardirqs_on_caller+0x74/0x1ac [ 254.041388] [<00000000000954fa>] trace_hardirqs_on+0x2a/0x38 [ 254.041402] [<000000000025f1ec>] __udelay_disabled+0xac/0xfc [ 254.041419] [<000000000025f432>] __udelay+0x12a/0x148 [ 254.041433] [<00000000002d64d8>] cio_commit_config+0x170/0x290 [ 254.041451] [<00000000002d6978>] cio_disable_subchannel+0x120/0x1cc [ 254.041468] [<00000000002e32a4>] ccw_device_recog_done+0x54/0x2f4 [ 254.041485] [<00000000002e3638>] ccw_device_sense_id_done+0x50/0x90 [ 254.041508] [<00000000002e615a>] snsid_callback+0xfa/0x3a8 [ 254.041515] [<00000000002dd96c>] ccwreq_stop+0x80/0x90 [ 254.041523] [<00000000002dda8e>] ccw_request_timeout+0xc2/0xd0 [ 254.041530] [<00000000002e2f70>] ccw_device_request_event+0x58/0x90 [ 254.041537] [<00000000002e47ae>] ccw_device_timeout+0x7e/0x2f0 [ 254.041555] [<000000000006c02a>] run_timer_softirq+0x22a/0x340 [ 254.041566] [<0000000000064eb0>] __do_softirq+0x138/0x2b0 [ 254.041578] [<0000000000024cf6>] do_softirq+0x102/0x108 [ 254.041590] [<00000000000647ce>] irq_exit+0xee/0x114 [ 254.041603] [<0000000000457d88>] do_extint+0x130/0x17c [ 254.041617] [<000000000002d41e>] ext_no_vtime+0x1e/0x22 [ 254.041631] [<0000000000029faa>] vtime_stop_cpu+0xbe/0x114 [ 254.041646] ([<0000000000029f58>] vtime_stop_cpu+0x6c/0x114) [ 254.041662] [<000000000001d842>] cpu_idle+0x122/0x1c0 [ 254.041679] [<00000000004482c6>] start_secondary+0xce/0xe0 [ 254.041696] [<0000000000000000>] 0x0 [ 254.041715] [<0000000000000000>] 0x0 [ 254.041745] INFO: lockdep is turned off. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> --- arch/s390/lib/delay.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/s390/lib/delay.c b/arch/s390/lib/delay.c index 3f5f680..97c1eca8 100644 --- a/arch/s390/lib/delay.c +++ b/arch/s390/lib/delay.c @@ -36,9 +36,11 @@ static void __udelay_disabled(unsigned long usecs) cr0 = (cr0_saved & 0xffff00e0) | 0x00000800; __ctl_load(cr0 , 0, 0); mask = psw_kernel_bits | PSW_MASK_WAIT | PSW_MASK_EXT; + lockdep_off(); trace_hardirqs_on(); __load_psw_mask(mask); local_irq_disable(); + lockdep_on(); __ctl_load(cr0_saved, 0, 0); local_tick_enable(clock_saved); set_clock_comparator(S390_lowcore.clock_comparator); -- cgit v1.1 From 81088819d588ba4d2dce3bf083fafc91974b14e0 Mon Sep 17 00:00:00 2001 From: Frank Munzert <munzert@de.ibm.com> Date: Tue, 7 Jul 2009 16:37:07 +0200 Subject: [S390] shutdown actions: save/return rc from init function We always returned -EINVAL when setting of a shutdown action failed. This was misleading, if for example the hardware did not support the shutdown action. Now we save each shutdown action's init return code and return it when the action is being set. Signed-off-by: Frank Munzert <munzert@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> --- arch/s390/kernel/ipl.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c index b8bf4b1..371a2d8 100644 --- a/arch/s390/kernel/ipl.c +++ b/arch/s390/kernel/ipl.c @@ -70,6 +70,7 @@ struct shutdown_action { char *name; void (*fn) (struct shutdown_trigger *trigger); int (*init) (void); + int init_rc; }; static char *ipl_type_str(enum ipl_type type) @@ -1486,11 +1487,13 @@ static int set_trigger(const char *buf, struct shutdown_trigger *trigger, int i; for (i = 0; i < SHUTDOWN_ACTIONS_COUNT; i++) { - if (!shutdown_actions_list[i]) - continue; if (sysfs_streq(buf, shutdown_actions_list[i]->name)) { - trigger->action = shutdown_actions_list[i]; - return len; + if (shutdown_actions_list[i]->init_rc) { + return shutdown_actions_list[i]->init_rc; + } else { + trigger->action = shutdown_actions_list[i]; + return len; + } } } return -EINVAL; @@ -1640,8 +1643,8 @@ static void __init shutdown_actions_init(void) for (i = 0; i < SHUTDOWN_ACTIONS_COUNT; i++) { if (!shutdown_actions_list[i]->init) continue; - if (shutdown_actions_list[i]->init()) - shutdown_actions_list[i] = NULL; + shutdown_actions_list[i]->init_rc = + shutdown_actions_list[i]->init(); } } -- cgit v1.1 From 2651fa2bcb1a7b06793441d50dcbf98efda592c6 Mon Sep 17 00:00:00 2001 From: Heiko Carstens <heiko.carstens@de.ibm.com> Date: Tue, 7 Jul 2009 16:37:08 +0200 Subject: [S390] perf_counter build fix Add PERF_COUNTER_INDEX_OFFSET define to fix this build bug: kernel/perf_counter.c: In function 'perf_counter_index': kernel/perf_counter.c:1889: error: 'PERF_COUNTER_INDEX_OFFSET' undeclared Same fix as for FRV since s390 doesn't support hw counters. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> --- arch/s390/include/asm/perf_counter.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/s390/include/asm/perf_counter.h b/arch/s390/include/asm/perf_counter.h index a7205a3..7015188 100644 --- a/arch/s390/include/asm/perf_counter.h +++ b/arch/s390/include/asm/perf_counter.h @@ -6,3 +6,5 @@ static inline void set_perf_counter_pending(void) {} static inline void clear_perf_counter_pending(void) {} + +#define PERF_COUNTER_INDEX_OFFSET 0 -- cgit v1.1 From 5075baca2e95840d76210c3cfda56134007462c9 Mon Sep 17 00:00:00 2001 From: Heiko Carstens <heiko.carstens@de.ibm.com> Date: Tue, 7 Jul 2009 16:37:09 +0200 Subject: [S390] add __ucmpdi2() helper function Provide __ucmpdi2() helper function on 31 bit so we don't run again and again in compile errors like this one: kernel/built-in.o: In function `T.689': perf_counter.c:(.text+0x56c86): undefined reference to `__ucmpdi2' Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> --- arch/s390/lib/Makefile | 2 +- arch/s390/lib/ucmpdi2.c | 26 ++++++++++++++++++++++++++ 2 files changed, 27 insertions(+), 1 deletion(-) create mode 100644 arch/s390/lib/ucmpdi2.c (limited to 'arch') diff --git a/arch/s390/lib/Makefile b/arch/s390/lib/Makefile index ab6735d..97975ec 100644 --- a/arch/s390/lib/Makefile +++ b/arch/s390/lib/Makefile @@ -3,6 +3,6 @@ # lib-y += delay.o string.o uaccess_std.o uaccess_pt.o -obj-$(CONFIG_32BIT) += div64.o qrnnd.o +obj-$(CONFIG_32BIT) += div64.o qrnnd.o ucmpdi2.o lib-$(CONFIG_64BIT) += uaccess_mvcos.o lib-$(CONFIG_SMP) += spinlock.o diff --git a/arch/s390/lib/ucmpdi2.c b/arch/s390/lib/ucmpdi2.c new file mode 100644 index 0000000..3e05ff5 --- /dev/null +++ b/arch/s390/lib/ucmpdi2.c @@ -0,0 +1,26 @@ +#include <linux/module.h> + +union ull_union { + unsigned long long ull; + struct { + unsigned int high; + unsigned int low; + } ui; +}; + +int __ucmpdi2(unsigned long long a, unsigned long long b) +{ + union ull_union au = {.ull = a}; + union ull_union bu = {.ull = b}; + + if (au.ui.high < bu.ui.high) + return 0; + else if (au.ui.high > bu.ui.high) + return 2; + if (au.ui.low < bu.ui.low) + return 0; + else if (au.ui.low > bu.ui.low) + return 2; + return 1; +} +EXPORT_SYMBOL(__ucmpdi2); -- cgit v1.1 From fca3e357d5de31e484c3e0ec7f356e4fc488eb7f Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky <schwidefsky@de.ibm.com> Date: Tue, 7 Jul 2009 16:37:10 +0200 Subject: [S390] set SCHED_OMIT_FRAME_POINTER for s390 The frame pointer is useless for s390 in the sched.c code. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> --- arch/s390/Kconfig | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index e577839..4cd12b5 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -96,6 +96,10 @@ config S390 select INIT_ALL_POSSIBLE select HAVE_PERF_COUNTERS +config SCHED_OMIT_FRAME_POINTER + bool + default y + source "init/Kconfig" source "kernel/Kconfig.freezer" -- cgit v1.1 From 25ca1251dc55673da1f3c6ddc1bf93fbb7fc83fc Mon Sep 17 00:00:00 2001 From: Heiko Carstens <heiko.carstens@de.ibm.com> Date: Tue, 7 Jul 2009 16:37:12 +0200 Subject: [S390] add generic atomic64 support for 31 bit Performance counters need 64 bit atomic operations. To keep the patch small we use the simple generic atomic64_t implementation. The native implementation follows with the next kernel. Fixes this build bug: In file included from kernel/sched.c:42: include/linux/perf_counter.h:427: error: expected specifier-qualifier-list before 'atomic64_t' Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> --- arch/s390/Kconfig | 1 + arch/s390/include/asm/atomic.h | 7 ++++++- 2 files changed, 7 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index 4cd12b5..f46a1b5 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -95,6 +95,7 @@ config S390 select HAVE_ARCH_TRACEHOOK select INIT_ALL_POSSIBLE select HAVE_PERF_COUNTERS + select GENERIC_ATOMIC64 if !64BIT config SCHED_OMIT_FRAME_POINTER bool diff --git a/arch/s390/include/asm/atomic.h b/arch/s390/include/asm/atomic.h index fca9dff..c7d0abf 100644 --- a/arch/s390/include/asm/atomic.h +++ b/arch/s390/include/asm/atomic.h @@ -268,7 +268,12 @@ static __inline__ int atomic64_add_unless(atomic64_t *v, #define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0) #undef __CSG_LOOP -#endif + +#else /* __s390x__ */ + +#include <asm-generic/atomic64.h> + +#endif /* __s390x__ */ #define smp_mb__before_atomic_dec() smp_mb() #define smp_mb__after_atomic_dec() smp_mb() -- cgit v1.1 From 07606309ff5a9136e340b9ca87c831650c1ec47a Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky <schwidefsky@de.ibm.com> Date: Tue, 7 Jul 2009 16:37:13 +0200 Subject: [S390] define KTIME_SCALAR for 32-bit s390 32-bit s390 has efficient support for 64/32-bit conversions, define KTIME_SCALAR to enable the use of the plain scalar nanosecond based representation of ktime. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> --- arch/s390/Kconfig | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index f46a1b5..2ae5d72 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -121,6 +121,9 @@ config 32BIT bool default y if !64BIT +config KTIME_SCALAR + def_bool 32BIT + config SMP bool "Symmetric multi-processing support" ---help--- -- cgit v1.1 From 551a232c87b7781712c57c31f3e0851303d9f591 Mon Sep 17 00:00:00 2001 From: Michael Ellerman <michael@ellerman.id.au> Date: Wed, 17 Jun 2009 18:13:50 +0000 Subject: powerpc/pseries: Use pr_devel() in pseries LPAR HPTE routines pr_debug() can now result in code being generated even when DEBUG is not defined. That's not really desirable in some places. In particular, pSeries_lpar_hpte_insert() goes from 185 instructions to 77 instructions as a result of this patch. Luckily that code isn't called very often ... With CONFIG_DYNAMIC_DEBUG=y: size before: text data bss dec hex filename 7284 1552 296 9132 23ac platforms/pseries/lpar.o size after: text data bss dec hex filename 5806 1096 296 7198 1c1e platforms/pseries/lpar.o Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> --- arch/powerpc/platforms/pseries/lpar.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c index e3139fa..903eb9e 100644 --- a/arch/powerpc/platforms/pseries/lpar.c +++ b/arch/powerpc/platforms/pseries/lpar.c @@ -286,7 +286,7 @@ static long pSeries_lpar_hpte_insert(unsigned long hpte_group, unsigned long hpte_v, hpte_r; if (!(vflags & HPTE_V_BOLTED)) - pr_debug("hpte_insert(group=%lx, va=%016lx, pa=%016lx, " + pr_devel("hpte_insert(group=%lx, va=%016lx, pa=%016lx, " "rflags=%lx, vflags=%lx, psize=%d)\n", hpte_group, va, pa, rflags, vflags, psize); @@ -294,7 +294,7 @@ static long pSeries_lpar_hpte_insert(unsigned long hpte_group, hpte_r = hpte_encode_r(pa, psize) | rflags; if (!(vflags & HPTE_V_BOLTED)) - pr_debug(" hpte_v=%016lx, hpte_r=%016lx\n", hpte_v, hpte_r); + pr_devel(" hpte_v=%016lx, hpte_r=%016lx\n", hpte_v, hpte_r); /* Now fill in the actual HPTE */ /* Set CEC cookie to 0 */ @@ -311,7 +311,7 @@ static long pSeries_lpar_hpte_insert(unsigned long hpte_group, lpar_rc = plpar_pte_enter(flags, hpte_group, hpte_v, hpte_r, &slot); if (unlikely(lpar_rc == H_PTEG_FULL)) { if (!(vflags & HPTE_V_BOLTED)) - pr_debug(" full\n"); + pr_devel(" full\n"); return -1; } @@ -322,11 +322,11 @@ static long pSeries_lpar_hpte_insert(unsigned long hpte_group, */ if (unlikely(lpar_rc != H_SUCCESS)) { if (!(vflags & HPTE_V_BOLTED)) - pr_debug(" lpar err %lu\n", lpar_rc); + pr_devel(" lpar err %lu\n", lpar_rc); return -2; } if (!(vflags & HPTE_V_BOLTED)) - pr_debug(" -> slot: %lu\n", slot & 7); + pr_devel(" -> slot: %lu\n", slot & 7); /* Because of iSeries, we have to pass down the secondary * bucket bit here as well @@ -418,17 +418,17 @@ static long pSeries_lpar_hpte_updatepp(unsigned long slot, want_v = hpte_encode_avpn(va, psize, ssize); - pr_debug(" update: avpnv=%016lx, hash=%016lx, f=%lx, psize: %d ...", + pr_devel(" update: avpnv=%016lx, hash=%016lx, f=%lx, psize: %d ...", want_v, slot, flags, psize); lpar_rc = plpar_pte_protect(flags, slot, want_v); if (lpar_rc == H_NOT_FOUND) { - pr_debug("not found !\n"); + pr_devel("not found !\n"); return -1; } - pr_debug("ok\n"); + pr_devel("ok\n"); BUG_ON(lpar_rc != H_SUCCESS); @@ -503,7 +503,7 @@ static void pSeries_lpar_hpte_invalidate(unsigned long slot, unsigned long va, unsigned long lpar_rc; unsigned long dummy1, dummy2; - pr_debug(" inval : slot=%lx, va=%016lx, psize: %d, local: %d\n", + pr_devel(" inval : slot=%lx, va=%016lx, psize: %d, local: %d\n", slot, va, psize, local); want_v = hpte_encode_avpn(va, psize, ssize); -- cgit v1.1 From d258e64ef595792d6f749518354b69583e9a97f4 Mon Sep 17 00:00:00 2001 From: Joe Perches <joe@perches.com> Date: Sun, 28 Jun 2009 06:26:10 +0000 Subject: powerpc: Remove unnecessary semicolons Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> --- arch/powerpc/mm/tlb_hash64.c | 2 +- arch/powerpc/oprofile/cell/vma_map.c | 2 +- arch/powerpc/platforms/powermac/cpufreq_64.c | 2 +- arch/powerpc/platforms/powermac/pic.c | 2 +- arch/powerpc/platforms/ps3/system-bus.c | 1 - arch/powerpc/sysdev/fsl_rio.c | 2 +- arch/powerpc/sysdev/ppc4xx_pci.c | 4 ++-- 7 files changed, 7 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/mm/tlb_hash64.c b/arch/powerpc/mm/tlb_hash64.c index 1be1b5e..937eb90 100644 --- a/arch/powerpc/mm/tlb_hash64.c +++ b/arch/powerpc/mm/tlb_hash64.c @@ -72,7 +72,7 @@ void hpte_need_flush(struct mm_struct *mm, unsigned long addr, */ if (huge) { #ifdef CONFIG_HUGETLB_PAGE - psize = get_slice_psize(mm, addr);; + psize = get_slice_psize(mm, addr); #else BUG(); psize = pte_pagesize_index(mm, addr, pte); /* shutup gcc */ diff --git a/arch/powerpc/oprofile/cell/vma_map.c b/arch/powerpc/oprofile/cell/vma_map.c index 258fa44..c591339 100644 --- a/arch/powerpc/oprofile/cell/vma_map.c +++ b/arch/powerpc/oprofile/cell/vma_map.c @@ -185,7 +185,7 @@ struct vma_to_fileoffset_map *create_vma_map(const struct spu *aSpu, goto fail; if (shdr_str.sh_type != SHT_STRTAB) - goto fail;; + goto fail; for (j = 0; j < shdr.sh_size / sizeof (sym); j++) { if (copy_from_user(&sym, spu_elf_start + diff --git a/arch/powerpc/platforms/powermac/cpufreq_64.c b/arch/powerpc/platforms/powermac/cpufreq_64.c index 22ecfbe..708c751 100644 --- a/arch/powerpc/platforms/powermac/cpufreq_64.c +++ b/arch/powerpc/platforms/powermac/cpufreq_64.c @@ -251,7 +251,7 @@ static void g5_pfunc_switch_volt(int speed_mode) static struct pmf_function *pfunc_cpu_setfreq_high; static struct pmf_function *pfunc_cpu_setfreq_low; static struct pmf_function *pfunc_cpu_getfreq; -static struct pmf_function *pfunc_slewing_done;; +static struct pmf_function *pfunc_slewing_done; static int g5_pfunc_switch_freq(int speed_mode) { diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c index dce7363..d212006 100644 --- a/arch/powerpc/platforms/powermac/pic.c +++ b/arch/powerpc/platforms/powermac/pic.c @@ -609,7 +609,7 @@ static int pmacpic_find_viaint(void) np = of_find_node_by_name(NULL, "via-pmu"); if (np == NULL) goto not_found; - viaint = irq_of_parse_and_map(np, 0);; + viaint = irq_of_parse_and_map(np, 0); not_found: #endif /* CONFIG_ADB_PMU */ diff --git a/arch/powerpc/platforms/ps3/system-bus.c b/arch/powerpc/platforms/ps3/system-bus.c index 9fead0f..3f763c5 100644 --- a/arch/powerpc/platforms/ps3/system-bus.c +++ b/arch/powerpc/platforms/ps3/system-bus.c @@ -284,7 +284,6 @@ static int ps3_sb_free_mmio_region(struct ps3_mmio_region *r) int result; dump_mmio_region(r); -; result = lv1_unmap_device_mmio_region(r->dev->bus_id, r->dev->dev_id, r->lpar_addr); diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c index 39db9d1..cbb3bed 100644 --- a/arch/powerpc/sysdev/fsl_rio.c +++ b/arch/powerpc/sysdev/fsl_rio.c @@ -965,7 +965,7 @@ static inline void fsl_rio_info(struct device *dev, u32 ccsr) break; default: str = "Unknown"; - break;; + break; } dev_info(dev, "Hardware port width: %s\n", str); diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c index daefc93..6ff9d71 100644 --- a/arch/powerpc/sysdev/ppc4xx_pci.c +++ b/arch/powerpc/sysdev/ppc4xx_pci.c @@ -1531,7 +1531,7 @@ static void __init ppc4xx_configure_pciex_PIMs(struct ppc4xx_pciex_port *port, */ /* Calculate window size */ - sa = (0xffffffffffffffffull << ilog2(ep_size));; + sa = (0xffffffffffffffffull << ilog2(ep_size)); /* Setup BAR0 */ out_le32(mbase + PECFG_BAR0HMPA, RES_TO_U32_HIGH(sa)); @@ -1550,7 +1550,7 @@ static void __init ppc4xx_configure_pciex_PIMs(struct ppc4xx_pciex_port *port, out_le32(mbase + PCI_BASE_ADDRESS_1, RES_TO_U32_HIGH(ep_addr)); } else { /* Calculate window size */ - sa = (0xffffffffffffffffull << ilog2(size));; + sa = (0xffffffffffffffffull << ilog2(size)); if (res->flags & IORESOURCE_PREFETCH) sa |= 0x8; -- cgit v1.1 From b69e9e931d2c6116921fdb260684e0546285c3c8 Mon Sep 17 00:00:00 2001 From: Michael Ellerman <michael@ellerman.id.au> Date: Wed, 17 Jun 2009 18:13:53 +0000 Subject: powerpc/pseries: Use pr_devel() in xics.c pr_debug() can now result in code being generated even when DEBUG is not defined. That's not really desirable in some places. With CONFIG_DYNAMIC_DEBUG=y: size before: text data bss dec hex filename 7720 5488 296 13504 34c0 platforms/pseries/xics.o size after: text data bss dec hex filename 7535 5456 296 13287 33e7 platforms/pseries/xics.o Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> --- arch/powerpc/platforms/pseries/xics.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c index be3581a..419f8a6 100644 --- a/arch/powerpc/platforms/pseries/xics.c +++ b/arch/powerpc/platforms/pseries/xics.c @@ -190,10 +190,10 @@ static void xics_unmask_irq(unsigned int virq) int call_status; int server; - pr_debug("xics: unmask virq %d\n", virq); + pr_devel("xics: unmask virq %d\n", virq); irq = (unsigned int)irq_map[virq].hwirq; - pr_debug(" -> map to hwirq 0x%x\n", irq); + pr_devel(" -> map to hwirq 0x%x\n", irq); if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS) return; @@ -252,7 +252,7 @@ static void xics_mask_irq(unsigned int virq) { unsigned int irq; - pr_debug("xics: mask virq %d\n", virq); + pr_devel("xics: mask virq %d\n", virq); irq = (unsigned int)irq_map[virq].hwirq; if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS) @@ -414,7 +414,7 @@ static int xics_host_match(struct irq_host *h, struct device_node *node) static int xics_host_map(struct irq_host *h, unsigned int virq, irq_hw_number_t hw) { - pr_debug("xics: map virq %d, hwirq 0x%lx\n", virq, hw); + pr_devel("xics: map virq %d, hwirq 0x%lx\n", virq, hw); /* Insert the interrupt mapping into the radix tree for fast lookup */ irq_radix_revmap_insert(xics_host, virq, hw); -- cgit v1.1 From a1ac38ab98e8a79ce225347b725f3b9751c70f1e Mon Sep 17 00:00:00 2001 From: Michael Ellerman <michael@ellerman.id.au> Date: Wed, 17 Jun 2009 18:13:54 +0000 Subject: powerpc: Use pr_devel() in arch/powerpc/mm/mmu_context_nohash.c pr_debug() can now result in code being generated even when DEBUG is not defined. That's not really desirable in some places. With CONFIG_DYNAMIC_DEBUG=y: size before: text data bss dec hex filename 1508 48 28 1584 630 powerpc/mm/mmu_context_nohash.o size after: text data bss dec hex filename 1088 0 28 1116 45c powerpc/mm/mmu_context_nohash.o Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> --- arch/powerpc/mm/mmu_context_nohash.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/mm/mmu_context_nohash.c b/arch/powerpc/mm/mmu_context_nohash.c index 8343986..92a1971 100644 --- a/arch/powerpc/mm/mmu_context_nohash.c +++ b/arch/powerpc/mm/mmu_context_nohash.c @@ -89,7 +89,7 @@ static unsigned int steal_context_smp(unsigned int id) id = first_context; continue; } - pr_debug("[%d] steal context %d from mm @%p\n", + pr_devel("[%d] steal context %d from mm @%p\n", smp_processor_id(), id, mm); /* Mark this mm has having no context anymore */ @@ -126,7 +126,7 @@ static unsigned int steal_context_up(unsigned int id) /* Pick up the victim mm */ mm = context_mm[id]; - pr_debug("[%d] steal context %d from mm @%p\n", cpu, id, mm); + pr_devel("[%d] steal context %d from mm @%p\n", cpu, id, mm); /* Flush the TLB for that context */ local_flush_tlb_mm(mm); @@ -180,7 +180,7 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next) spin_lock(&context_lock); #ifndef DEBUG_STEAL_ONLY - pr_debug("[%d] activating context for mm @%p, active=%d, id=%d\n", + pr_devel("[%d] activating context for mm @%p, active=%d, id=%d\n", cpu, next, next->context.active, next->context.id); #endif @@ -189,7 +189,7 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next) next->context.active++; if (prev) { #ifndef DEBUG_STEAL_ONLY - pr_debug(" old context %p active was: %d\n", + pr_devel(" old context %p active was: %d\n", prev, prev->context.active); #endif WARN_ON(prev->context.active < 1); @@ -236,7 +236,7 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next) next->context.id = id; #ifndef DEBUG_STEAL_ONLY - pr_debug("[%d] picked up new id %d, nrf is now %d\n", + pr_devel("[%d] picked up new id %d, nrf is now %d\n", cpu, id, nr_free_contexts); #endif @@ -247,7 +247,7 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next) * local TLB for it and unmark it before we use it */ if (test_bit(id, stale_map[cpu])) { - pr_debug("[%d] flushing stale context %d for mm @%p !\n", + pr_devel("[%d] flushing stale context %d for mm @%p !\n", cpu, id, next); local_flush_tlb_mm(next); @@ -314,13 +314,13 @@ static int __cpuinit mmu_context_cpu_notify(struct notifier_block *self, switch (action) { case CPU_ONLINE: case CPU_ONLINE_FROZEN: - pr_debug("MMU: Allocating stale context map for CPU %d\n", cpu); + pr_devel("MMU: Allocating stale context map for CPU %d\n", cpu); stale_map[cpu] = kzalloc(CTX_MAP_SIZE, GFP_KERNEL); break; #ifdef CONFIG_HOTPLUG_CPU case CPU_DEAD: case CPU_DEAD_FROZEN: - pr_debug("MMU: Freeing stale context map for CPU %d\n", cpu); + pr_devel("MMU: Freeing stale context map for CPU %d\n", cpu); kfree(stale_map[cpu]); stale_map[cpu] = NULL; break; -- cgit v1.1 From 3665ee36fac936b2ad0ab170d101a3e2c8eb3fd2 Mon Sep 17 00:00:00 2001 From: Huang Weiyi <weiyi.huang@gmail.com> Date: Sat, 20 Jun 2009 13:37:00 +0000 Subject: powerpc/perf_counter: Remove duplicated #include Remove duplicated #include('s) in arch/powerpc/kernel/mpc7450-pmu.c arch/powerpc/kernel/ppc970-pmu.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> --- arch/powerpc/kernel/mpc7450-pmu.c | 1 - arch/powerpc/kernel/ppc970-pmu.c | 1 - 2 files changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/mpc7450-pmu.c b/arch/powerpc/kernel/mpc7450-pmu.c index 75ff47f..c244133 100644 --- a/arch/powerpc/kernel/mpc7450-pmu.c +++ b/arch/powerpc/kernel/mpc7450-pmu.c @@ -10,7 +10,6 @@ */ #include <linux/string.h> #include <linux/perf_counter.h> -#include <linux/string.h> #include <asm/reg.h> #include <asm/cputable.h> diff --git a/arch/powerpc/kernel/ppc970-pmu.c b/arch/powerpc/kernel/ppc970-pmu.c index 6637c87f..833097a 100644 --- a/arch/powerpc/kernel/ppc970-pmu.c +++ b/arch/powerpc/kernel/ppc970-pmu.c @@ -10,7 +10,6 @@ */ #include <linux/string.h> #include <linux/perf_counter.h> -#include <linux/string.h> #include <asm/reg.h> #include <asm/cputable.h> -- cgit v1.1 From 651e2dd2a1c47bb078d446f123a9ae950ba7a1f0 Mon Sep 17 00:00:00 2001 From: Michael Ellerman <michael@ellerman.id.au> Date: Wed, 17 Jun 2009 18:13:51 +0000 Subject: powerpc: Cleanup & use pr_devel() in arch/powerpc/mm/slb.c pr_debug() can now result in code being generated even when DEBUG is not defined. That's not really desirable in some places. With CONFIG_DYNAMIC_DEBUG=y: size before: text data bss dec hex filename 3261 416 4 3681 e61 arch/powerpc/mm/slb.o size after: text data bss dec hex filename 2861 248 4 3113 c29 arch/powerpc/mm/slb.o Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> --- arch/powerpc/mm/slb.c | 13 +++---------- 1 file changed, 3 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c index 3b52c80..5b7038f 100644 --- a/arch/powerpc/mm/slb.c +++ b/arch/powerpc/mm/slb.c @@ -14,8 +14,6 @@ * 2 of the License, or (at your option) any later version. */ -#undef DEBUG - #include <asm/pgtable.h> #include <asm/mmu.h> #include <asm/mmu_context.h> @@ -27,11 +25,6 @@ #include <linux/compiler.h> #include <asm/udbg.h> -#ifdef DEBUG -#define DBG(fmt...) printk(fmt) -#else -#define DBG pr_debug -#endif extern void slb_allocate_realmode(unsigned long ea); extern void slb_allocate_user(unsigned long ea); @@ -285,13 +278,13 @@ void slb_initialize(void) patch_slb_encoding(slb_compare_rr_to_size, mmu_slb_size); - DBG("SLB: linear LLP = %04lx\n", linear_llp); - DBG("SLB: io LLP = %04lx\n", io_llp); + pr_devel("SLB: linear LLP = %04lx\n", linear_llp); + pr_devel("SLB: io LLP = %04lx\n", io_llp); #ifdef CONFIG_SPARSEMEM_VMEMMAP patch_slb_encoding(slb_miss_kernel_load_vmemmap, SLB_VSID_KERNEL | vmemmap_llp); - DBG("SLB: vmemmap LLP = %04lx\n", vmemmap_llp); + pr_devel("SLB: vmemmap LLP = %04lx\n", vmemmap_llp); #endif } -- cgit v1.1 From 29e5fa59e5ebe06d6bd7e04e7752a47ead23f89e Mon Sep 17 00:00:00 2001 From: Michael Ellerman <michael@ellerman.id.au> Date: Wed, 17 Jun 2009 18:13:51 +0000 Subject: powerpc: Use pr_devel() in arch/powerpc/mm/gup.c pr_debug() can now result in code being generated even when DEBUG is not defined. That's not really desirable in some places. With CONFIG_DYNAMIC_DEBUG=y: size before: text data bss dec hex filename 3252 384 0 3636 e34 arch/powerpc/mm/gup.o size after: text data bss dec hex filename 2576 96 0 2672 a70 arch/powerpc/mm/gup.o Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> --- arch/powerpc/mm/gup.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/mm/gup.c b/arch/powerpc/mm/gup.c index bc400c7..bc122a1 100644 --- a/arch/powerpc/mm/gup.c +++ b/arch/powerpc/mm/gup.c @@ -159,7 +159,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write, int psize; #endif - pr_debug("%s(%lx,%x,%s)\n", __func__, start, nr_pages, write ? "write" : "read"); + pr_devel("%s(%lx,%x,%s)\n", __func__, start, nr_pages, write ? "write" : "read"); start &= PAGE_MASK; addr = start; @@ -170,7 +170,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write, start, len))) goto slow_irqon; - pr_debug(" aligned: %lx .. %lx\n", start, end); + pr_devel(" aligned: %lx .. %lx\n", start, end); #ifdef CONFIG_HUGETLB_PAGE /* We bail out on slice boundary crossing when hugetlb is @@ -234,7 +234,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write, do { VM_BUG_ON(shift != mmu_psize_defs[get_slice_psize(mm, a)].shift); ptep = huge_pte_offset(mm, a); - pr_debug(" %016lx: huge ptep %p\n", a, ptep); + pr_devel(" %016lx: huge ptep %p\n", a, ptep); if (!ptep || !gup_huge_pte(ptep, hstate, &a, end, write, pages, &nr)) goto slow; @@ -249,7 +249,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write, #ifdef CONFIG_PPC64 VM_BUG_ON(shift != mmu_psize_defs[get_slice_psize(mm, addr)].shift); #endif - pr_debug(" %016lx: normal pgd %p\n", addr, + pr_devel(" %016lx: normal pgd %p\n", addr, (void *)pgd_val(pgd)); next = pgd_addr_end(addr, end); if (pgd_none(pgd)) @@ -269,7 +269,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write, slow: local_irq_enable(); slow_irqon: - pr_debug(" slow path ! nr = %d\n", nr); + pr_devel(" slow path ! nr = %d\n", nr); /* Try to get the remaining pages with get_user_pages */ start += nr << PAGE_SHIFT; -- cgit v1.1 From 33875f03307452650309a7d071678b2ca5f2fc26 Mon Sep 17 00:00:00 2001 From: Michael Ellerman <michael@ellerman.id.au> Date: Wed, 17 Jun 2009 18:13:53 +0000 Subject: powerpc/cell: Use pr_devel() in axon_msi.c pr_debug() can now result in code being generated even when DEBUG is not defined. That's not really desirable in some places. With CONFIG_DYNAMIC_DEBUG=y: size before: text data bss dec hex filename 7083 1616 0 8699 21fb arch/powerpc/../axon_msi.o size after: text data bss dec hex filename 5772 1208 0 6980 1b44 arch/powerpc/../axon_msi.o Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> --- arch/powerpc/platforms/cell/axon_msi.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/cell/axon_msi.c b/arch/powerpc/platforms/cell/axon_msi.c index c71498d..aca5741 100644 --- a/arch/powerpc/platforms/cell/axon_msi.c +++ b/arch/powerpc/platforms/cell/axon_msi.c @@ -85,7 +85,7 @@ static inline void axon_msi_debug_setup(struct device_node *dn, static void msic_dcr_write(struct axon_msic *msic, unsigned int dcr_n, u32 val) { - pr_debug("axon_msi: dcr_write(0x%x, 0x%x)\n", val, dcr_n); + pr_devel("axon_msi: dcr_write(0x%x, 0x%x)\n", val, dcr_n); dcr_write(msic->dcr_host, dcr_n, val); } @@ -98,7 +98,7 @@ static void axon_msi_cascade(unsigned int irq, struct irq_desc *desc) int retry = 0; write_offset = dcr_read(msic->dcr_host, MSIC_WRITE_OFFSET_REG); - pr_debug("axon_msi: original write_offset 0x%x\n", write_offset); + pr_devel("axon_msi: original write_offset 0x%x\n", write_offset); /* write_offset doesn't wrap properly, so we have to mask it */ write_offset &= MSIC_FIFO_SIZE_MASK; @@ -108,7 +108,7 @@ static void axon_msi_cascade(unsigned int irq, struct irq_desc *desc) msi = le32_to_cpu(msic->fifo_virt[idx]); msi &= 0xFFFF; - pr_debug("axon_msi: woff %x roff %x msi %x\n", + pr_devel("axon_msi: woff %x roff %x msi %x\n", write_offset, msic->read_offset, msi); if (msi < NR_IRQS && irq_map[msi].host == msic->irq_host) { @@ -123,12 +123,12 @@ static void axon_msi_cascade(unsigned int irq, struct irq_desc *desc) */ udelay(1); retry++; - pr_debug("axon_msi: invalid irq 0x%x!\n", msi); + pr_devel("axon_msi: invalid irq 0x%x!\n", msi); continue; } if (retry) { - pr_debug("axon_msi: late irq 0x%x, retry %d\n", + pr_devel("axon_msi: late irq 0x%x, retry %d\n", msi, retry); retry = 0; } @@ -332,7 +332,7 @@ static int axon_msi_shutdown(struct of_device *device) struct axon_msic *msic = dev_get_drvdata(&device->dev); u32 tmp; - pr_debug("axon_msi: disabling %s\n", + pr_devel("axon_msi: disabling %s\n", msic->irq_host->of_node->full_name); tmp = dcr_read(msic->dcr_host, MSIC_CTRL_REG); tmp &= ~MSIC_CTRL_ENABLE & ~MSIC_CTRL_IRQ_ENABLE; @@ -349,7 +349,7 @@ static int axon_msi_probe(struct of_device *device, unsigned int virq; int dcr_base, dcr_len; - pr_debug("axon_msi: setting up dn %s\n", dn->full_name); + pr_devel("axon_msi: setting up dn %s\n", dn->full_name); msic = kzalloc(sizeof(struct axon_msic), GFP_KERNEL); if (!msic) { @@ -403,7 +403,7 @@ static int axon_msi_probe(struct of_device *device, set_irq_data(virq, msic); set_irq_chained_handler(virq, axon_msi_cascade); - pr_debug("axon_msi: irq 0x%x setup for axon_msi\n", virq); + pr_devel("axon_msi: irq 0x%x setup for axon_msi\n", virq); /* Enable the MSIC hardware */ msic_dcr_write(msic, MSIC_BASE_ADDR_HI_REG, msic->fifo_phys >> 32); @@ -484,13 +484,13 @@ void axon_msi_debug_setup(struct device_node *dn, struct axon_msic *msic) addr = of_translate_address(dn, of_get_property(dn, "reg", NULL)); if (addr == OF_BAD_ADDR) { - pr_debug("axon_msi: couldn't translate reg property\n"); + pr_devel("axon_msi: couldn't translate reg property\n"); return; } msic->trigger = ioremap(addr, 0x4); if (!msic->trigger) { - pr_debug("axon_msi: ioremap failed\n"); + pr_devel("axon_msi: ioremap failed\n"); return; } @@ -498,7 +498,7 @@ void axon_msi_debug_setup(struct device_node *dn, struct axon_msic *msic) if (!debugfs_create_file(name, 0600, powerpc_debugfs_root, msic, &fops_msic)) { - pr_debug("axon_msi: debugfs_create_file failed!\n"); + pr_devel("axon_msi: debugfs_create_file failed!\n"); return; } } -- cgit v1.1 From 30c5af435b2e3e5700b0e4a53ac37a39b3b3516e Mon Sep 17 00:00:00 2001 From: Michael Ellerman <michael@ellerman.id.au> Date: Wed, 17 Jun 2009 18:13:52 +0000 Subject: powerpc: Use pr_devel() in do_dcache_icache_coherency() pr_debug() can now result in code being generated even when DEBUG is not defined. That's not really desirable in some places. With CONFIG_DYNAMIC_DEBUG=y: size before: text data bss dec hex filename 2036 368 8 2412 96c arch/powerpc/mm/pgtable.o size after: text data bss dec hex filename 1677 248 8 1933 78d arch/powerpc/mm/pgtable.o Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> --- arch/powerpc/mm/pgtable.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/mm/pgtable.c b/arch/powerpc/mm/pgtable.c index ae1d67c..627767d 100644 --- a/arch/powerpc/mm/pgtable.c +++ b/arch/powerpc/mm/pgtable.c @@ -129,12 +129,12 @@ static pte_t do_dcache_icache_coherency(pte_t pte) page = pfn_to_page(pfn); if (!PageReserved(page) && !test_bit(PG_arch_1, &page->flags)) { - pr_debug("do_dcache_icache_coherency... flushing\n"); + pr_devel("do_dcache_icache_coherency... flushing\n"); flush_dcache_icache_page(page); set_bit(PG_arch_1, &page->flags); } else - pr_debug("do_dcache_icache_coherency... already clean\n"); + pr_devel("do_dcache_icache_coherency... already clean\n"); return __pte(pte_val(pte) | _PAGE_HWEXEC); } -- cgit v1.1 From ad9064d5e22a6a24f828dad63c4775c4d7280bd4 Mon Sep 17 00:00:00 2001 From: Grant Likely <grant.likely@secretlab.ca> Date: Mon, 29 Jun 2009 13:40:51 +0000 Subject: powerpc: Fix spin_event_timeout() to be robust over context switches Current implementation of spin_event_timeout can be interrupted by an IRQ or context switch after testing the condition, but before checking the timeout. This can cause the loop to report a timeout when the condition actually became true in the middle. This patch adds one final check of the condition upon exit of the loop if the last test of the condition was still false. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> --- arch/powerpc/include/asm/delay.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/include/asm/delay.h b/arch/powerpc/include/asm/delay.h index 1e2eb41..52e4d54 100644 --- a/arch/powerpc/include/asm/delay.h +++ b/arch/powerpc/include/asm/delay.h @@ -63,6 +63,8 @@ extern void udelay(unsigned long usecs); udelay(delay); \ else \ cpu_relax(); \ + if (!__ret) \ + __ret = (condition); \ __ret; \ }) -- cgit v1.1 From ea96025a26ab8949adab1a8e81419202f92f3f7f Mon Sep 17 00:00:00 2001 From: Anton Vorontsov <avorontsov@ru.mvista.com> Date: Wed, 1 Jul 2009 10:59:57 +0000 Subject: powerpc: Don't use alloc_bootmem() in init_IRQ() path This patch fixes various badnesses like this for all interrupt controllers: ------------[ cut here ]------------ Badness at c04db9dc [verbose debug info unavailable] NIP: c04db9dc LR: c04db9ac CTR: 00000000 REGS: c053de30 TRAP: 0700 Not tainted (2.6.31-rc1-00432-ge69b2b5-dirty) MSR: 00021000 <ME,CE> CR: 22020084 XER: 00000000 TASK = c0500480[0] 'swapper' THREAD: c053c000 GPR00: 00000001 c053dee0 c0500480 00000000 00000050 00000020 3fffffff 00000000 GPR08: 00000001 c0540000 e0080080 00000000 22000084 64183600 3ff8f800 00000000 GPR16: 841b0240 449a0303 00000000 00000000 00000000 00000000 00000000 c04f5bf4 GPR24: 00000000 00000000 00000000 00000050 00000020 00000000 3fffffff 00000050 NIP [c04db9dc] alloc_arch_preferred_bootmem+0x48/0x74 LR [c04db9ac] alloc_arch_preferred_bootmem+0x18/0x74 Call Trace: [c053dee0] [c000a5a4] __of_address_to_resource+0x44/0xd0 (unreliable) [c053def0] [c04dba58] ___alloc_bootmem_nopanic+0x50/0x108 [c053df20] [c04dbb28] ___alloc_bootmem+0x18/0x50 [c053df30] [c04d5de0] qe_ic_init+0x5c/0x1b0 [c053df70] [c04d77b0] mpc85xx_mds_pic_init+0xb8/0x10c [c053dfb0] [c04cf374] init_IRQ+0x28/0x3c p.s. commit 85355bb272db31a3f2dd99d547eef794805e1319 ("powerpc: Fix mpic alloc warning") missed some alloc_bootmem() instances, this is now fixed. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> --- arch/powerpc/platforms/82xx/pq2ads-pci-pic.c | 2 +- arch/powerpc/sysdev/ipic.c | 4 +--- arch/powerpc/sysdev/mpic.c | 9 ++++----- arch/powerpc/sysdev/qe_lib/qe_ic.c | 4 +--- arch/powerpc/sysdev/uic.c | 3 +-- 5 files changed, 8 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c b/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c index ddf0bdc..7ee979f 100644 --- a/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c +++ b/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c @@ -147,7 +147,7 @@ int __init pq2ads_pci_init_irq(void) goto out; } - priv = alloc_bootmem(sizeof(struct pq2ads_pci_pic)); + priv = kzalloc(sizeof(*priv), GFP_KERNEL); if (!priv) { of_node_put(np); ret = -ENOMEM; diff --git a/arch/powerpc/sysdev/ipic.c b/arch/powerpc/sysdev/ipic.c index a86d3ce..69e2630 100644 --- a/arch/powerpc/sysdev/ipic.c +++ b/arch/powerpc/sysdev/ipic.c @@ -728,12 +728,10 @@ struct ipic * __init ipic_init(struct device_node *node, unsigned int flags) if (ret) return NULL; - ipic = alloc_bootmem(sizeof(struct ipic)); + ipic = kzalloc(sizeof(*ipic), GFP_KERNEL); if (ipic == NULL) return NULL; - memset(ipic, 0, sizeof(struct ipic)); - ipic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR, NR_IPIC_INTS, &ipic_host_ops, 0); diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index d46de1f..3981ae4 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -508,9 +508,8 @@ static void __init mpic_scan_ht_pics(struct mpic *mpic) printk(KERN_INFO "mpic: Setting up HT PICs workarounds for U3/U4\n"); /* Allocate fixups array */ - mpic->fixups = alloc_bootmem(128 * sizeof(struct mpic_irq_fixup)); + mpic->fixups = kzalloc(128 * sizeof(*mpic->fixups), GFP_KERNEL); BUG_ON(mpic->fixups == NULL); - memset(mpic->fixups, 0, 128 * sizeof(struct mpic_irq_fixup)); /* Init spinlock */ spin_lock_init(&mpic->fixup_lock); @@ -1109,9 +1108,8 @@ struct mpic * __init mpic_alloc(struct device_node *node, psize /= 4; bits = intvec_top + 1; mapsize = BITS_TO_LONGS(bits) * sizeof(unsigned long); - mpic->protected = alloc_bootmem(mapsize); + mpic->protected = kzalloc(mapsize, GFP_KERNEL); BUG_ON(mpic->protected == NULL); - memset(mpic->protected, 0, mapsize); for (i = 0; i < psize; i++) { if (psrc[i] > intvec_top) continue; @@ -1353,7 +1351,8 @@ void __init mpic_init(struct mpic *mpic) #ifdef CONFIG_PM /* allocate memory to save mpic state */ - mpic->save_data = alloc_bootmem(mpic->num_sources * sizeof(struct mpic_irq_save)); + mpic->save_data = kmalloc(mpic->num_sources * sizeof(*mpic->save_data), + GFP_KERNEL); BUG_ON(mpic->save_data == NULL); #endif } diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.c b/arch/powerpc/sysdev/qe_lib/qe_ic.c index 63cdf98..074905c 100644 --- a/arch/powerpc/sysdev/qe_lib/qe_ic.c +++ b/arch/powerpc/sysdev/qe_lib/qe_ic.c @@ -333,12 +333,10 @@ void __init qe_ic_init(struct device_node *node, unsigned int flags, if (ret) return; - qe_ic = alloc_bootmem(sizeof(struct qe_ic)); + qe_ic = kzalloc(sizeof(*qe_ic), GFP_KERNEL); if (qe_ic == NULL) return; - memset(qe_ic, 0, sizeof(struct qe_ic)); - qe_ic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR, NR_QE_IC_INTS, &qe_ic_host_ops, 0); if (qe_ic->irqhost == NULL) diff --git a/arch/powerpc/sysdev/uic.c b/arch/powerpc/sysdev/uic.c index d35405c..466ce9a 100644 --- a/arch/powerpc/sysdev/uic.c +++ b/arch/powerpc/sysdev/uic.c @@ -258,11 +258,10 @@ static struct uic * __init uic_init_one(struct device_node *node) BUG_ON(! of_device_is_compatible(node, "ibm,uic")); - uic = alloc_bootmem(sizeof(*uic)); + uic = kzalloc(sizeof(*uic), GFP_KERNEL); if (! uic) return NULL; /* FIXME: panic? */ - memset(uic, 0, sizeof(*uic)); spin_lock_init(&uic->lock); indexp = of_get_property(node, "cell-index", &len); if (!indexp || (len != sizeof(u32))) { -- cgit v1.1 From 00024be9689963c55cf2ab10ce3fb4502016c09a Mon Sep 17 00:00:00 2001 From: Peter Chubb <peter.chubb@nicta.com.au> Date: Wed, 8 Jul 2009 13:20:13 +0200 Subject: x86: Fix resume from suspend when CONFIG_CC_STACKPROTECTOR Patch 08687aec71bc9134fe336e561f6did877bacf74fc0a (x86: unify power/cpu_(32|64).c) renamed cpu_32.c to cpu.c, but did not update the special compilation flags for the file for the new name. This patch fixes the compilation flags, and therefore fixes resume from suspend on my Acer Aspire One. [rjw: The regression from 2.6.30 fixed by this patch is tracked as http://bugzilla.kernel.org/show_bug.cgi?id=13661] Signed-off-by: Peter Chubb <peterc@nicta.com.au> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> --- arch/x86/power/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/power/Makefile b/arch/x86/power/Makefile index de2abbd..a6a198c 100644 --- a/arch/x86/power/Makefile +++ b/arch/x86/power/Makefile @@ -1,7 +1,7 @@ # __restore_processor_state() restores %gs after S3 resume and so should not # itself be stack-protected nostackp := $(call cc-option, -fno-stack-protector) -CFLAGS_cpu_$(BITS).o := $(nostackp) +CFLAGS_cpu.o := $(nostackp) obj-$(CONFIG_PM_SLEEP) += cpu.o obj-$(CONFIG_HIBERNATION) += hibernate_$(BITS).o hibernate_asm_$(BITS).o -- cgit v1.1 From ad361c9884e809340f6daca80d56a9e9c871690a Mon Sep 17 00:00:00 2001 From: Joe Perches <joe@perches.com> Date: Mon, 6 Jul 2009 13:05:40 -0700 Subject: Remove multiple KERN_ prefixes from printk formats Commit 5fd29d6ccbc98884569d6f3105aeca70858b3e0f ("printk: clean up handling of log-levels and newlines") changed printk semantics. printk lines with multiple KERN_<level> prefixes are no longer emitted as before the patch. <level> is now included in the output on each additional use. Remove all uses of multiple KERN_<level>s in formats. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> --- arch/avr32/kernel/traps.c | 13 ++++++---- arch/blackfin/kernel/setup.c | 41 ++++++++++++++++--------------- arch/blackfin/kernel/traps.c | 34 ++++++++++++------------- arch/m68knommu/kernel/process.c | 21 ++++++++-------- arch/m68knommu/kernel/traps.c | 6 ++--- arch/mn10300/kernel/traps.c | 21 ++++++---------- arch/parisc/kernel/process.c | 2 +- arch/parisc/kernel/traps.c | 20 +++++++-------- arch/um/kernel/sysrq.c | 4 +-- arch/x86/kernel/apic/io_apic.c | 1 - arch/x86/kernel/cpu/cpufreq/powernow-k8.c | 2 +- arch/x86/kernel/cpu/mcheck/mce.c | 12 ++++----- arch/x86/kernel/e820.c | 7 +++--- arch/x86/kernel/pci-gart_64.c | 2 +- arch/x86/mm/fault.c | 9 ++++--- arch/xtensa/kernel/traps.c | 6 ++--- 16 files changed, 99 insertions(+), 102 deletions(-) (limited to 'arch') diff --git a/arch/avr32/kernel/traps.c b/arch/avr32/kernel/traps.c index 6e3d491..b91b204 100644 --- a/arch/avr32/kernel/traps.c +++ b/arch/avr32/kernel/traps.c @@ -32,22 +32,25 @@ void NORET_TYPE die(const char *str, struct pt_regs *regs, long err) spin_lock_irq(&die_lock); bust_spinlocks(1); - printk(KERN_ALERT "Oops: %s, sig: %ld [#%d]\n" KERN_EMERG, + printk(KERN_ALERT "Oops: %s, sig: %ld [#%d]\n", str, err, ++die_counter); + + printk(KERN_EMERG); + #ifdef CONFIG_PREEMPT - printk("PREEMPT "); + printk(KERN_CONT "PREEMPT "); #endif #ifdef CONFIG_FRAME_POINTER - printk("FRAME_POINTER "); + printk(KERN_CONT "FRAME_POINTER "); #endif if (current_cpu_data.features & AVR32_FEATURE_OCD) { unsigned long did = ocd_read(DID); - printk("chip: 0x%03lx:0x%04lx rev %lu\n", + printk(KERN_CONT "chip: 0x%03lx:0x%04lx rev %lu\n", (did >> 1) & 0x7ff, (did >> 12) & 0x7fff, (did >> 28) & 0xf); } else { - printk("cpu: arch %u r%u / core %u r%u\n", + printk(KERN_CONT "cpu: arch %u r%u / core %u r%u\n", current_cpu_data.arch_type, current_cpu_data.arch_revision, current_cpu_data.cpu_type, diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index 298f023..6136c33 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -408,13 +408,14 @@ static void __init print_memory_map(char *who) bfin_memmap.map[i].addr + bfin_memmap.map[i].size); switch (bfin_memmap.map[i].type) { case BFIN_MEMMAP_RAM: - printk("(usable)\n"); - break; + printk(KERN_CONT "(usable)\n"); + break; case BFIN_MEMMAP_RESERVED: - printk("(reserved)\n"); - break; - default: printk("type %lu\n", bfin_memmap.map[i].type); - break; + printk(KERN_CONT "(reserved)\n"); + break; + default: + printk(KERN_CONT "type %lu\n", bfin_memmap.map[i].type); + break; } } } @@ -614,19 +615,19 @@ static __init void memory_setup(void) printk(KERN_INFO "Kernel Managed Memory: %ldMB\n", _ramend >> 20); printk(KERN_INFO "Memory map:\n" - KERN_INFO " fixedcode = 0x%p-0x%p\n" - KERN_INFO " text = 0x%p-0x%p\n" - KERN_INFO " rodata = 0x%p-0x%p\n" - KERN_INFO " bss = 0x%p-0x%p\n" - KERN_INFO " data = 0x%p-0x%p\n" - KERN_INFO " stack = 0x%p-0x%p\n" - KERN_INFO " init = 0x%p-0x%p\n" - KERN_INFO " available = 0x%p-0x%p\n" + " fixedcode = 0x%p-0x%p\n" + " text = 0x%p-0x%p\n" + " rodata = 0x%p-0x%p\n" + " bss = 0x%p-0x%p\n" + " data = 0x%p-0x%p\n" + " stack = 0x%p-0x%p\n" + " init = 0x%p-0x%p\n" + " available = 0x%p-0x%p\n" #ifdef CONFIG_MTD_UCLINUX - KERN_INFO " rootfs = 0x%p-0x%p\n" + " rootfs = 0x%p-0x%p\n" #endif #if DMA_UNCACHED_REGION > 0 - KERN_INFO " DMA Zone = 0x%p-0x%p\n" + " DMA Zone = 0x%p-0x%p\n" #endif , (void *)FIXED_CODE_START, (void *)FIXED_CODE_END, _stext, _etext, @@ -859,13 +860,13 @@ void __init setup_arch(char **cmdline_p) #endif printk(KERN_INFO "Hardware Trace "); if (bfin_read_TBUFCTL() & 0x1) - printk("Active "); + printk(KERN_CONT "Active "); else - printk("Off "); + printk(KERN_CONT "Off "); if (bfin_read_TBUFCTL() & 0x2) - printk("and Enabled\n"); + printk(KERN_CONT "and Enabled\n"); else - printk("and Disabled\n"); + printk(KERN_CONT "and Disabled\n"); #if defined(CONFIG_CHR_DEV_FLASH) || defined(CONFIG_BLK_DEV_FLASH) /* we need to initialize the Flashrom device here since we might diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index 8eeb457..8a1caf2 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -212,7 +212,7 @@ asmlinkage void double_fault_c(struct pt_regs *fp) console_verbose(); oops_in_progress = 1; #ifdef CONFIG_DEBUG_VERBOSE - printk(KERN_EMERG "\n" KERN_EMERG "Double Fault\n"); + printk(KERN_EMERG "Double Fault\n"); #ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT if (((long)fp->seqstat & SEQSTAT_EXCAUSE) == VEC_UNCOV) { unsigned int cpu = smp_processor_id(); @@ -583,15 +583,14 @@ asmlinkage void trap_c(struct pt_regs *fp) #ifndef CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE if (trapnr == VEC_CPLB_I_M || trapnr == VEC_CPLB_M) verbose_printk(KERN_NOTICE "No trace since you do not have " - "CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE enabled\n" - KERN_NOTICE "\n"); + "CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE enabled\n\n"); else #endif dump_bfin_trace_buffer(); if (oops_in_progress) { /* Dump the current kernel stack */ - verbose_printk(KERN_NOTICE "\n" KERN_NOTICE "Kernel Stack\n"); + verbose_printk(KERN_NOTICE "Kernel Stack\n"); show_stack(current, NULL); print_modules(); #ifndef CONFIG_ACCESS_CHECK @@ -906,7 +905,7 @@ void show_stack(struct task_struct *task, unsigned long *stack) ret_addr = 0; if (!j && i % 8 == 0) - printk("\n" KERN_NOTICE "%p:",addr); + printk(KERN_NOTICE "%p:",addr); /* if it is an odd address, or zero, just skip it */ if (*addr & 0x1 || !*addr) @@ -996,9 +995,9 @@ void dump_bfin_process(struct pt_regs *fp) printk(KERN_NOTICE "CPU = %d\n", current_thread_info()->cpu); if (!((unsigned long)current->mm & 0x3) && (unsigned long)current->mm >= FIXED_CODE_START) - verbose_printk(KERN_NOTICE "TEXT = 0x%p-0x%p DATA = 0x%p-0x%p\n" - KERN_NOTICE " BSS = 0x%p-0x%p USER-STACK = 0x%p\n" - KERN_NOTICE "\n", + verbose_printk(KERN_NOTICE + "TEXT = 0x%p-0x%p DATA = 0x%p-0x%p\n" + " BSS = 0x%p-0x%p USER-STACK = 0x%p\n\n", (void *)current->mm->start_code, (void *)current->mm->end_code, (void *)current->mm->start_data, @@ -1009,8 +1008,8 @@ void dump_bfin_process(struct pt_regs *fp) else verbose_printk(KERN_NOTICE "invalid mm\n"); } else - verbose_printk(KERN_NOTICE "\n" KERN_NOTICE - "No Valid process in current context\n"); + verbose_printk(KERN_NOTICE + "No Valid process in current context\n"); #endif } @@ -1028,7 +1027,7 @@ void dump_bfin_mem(struct pt_regs *fp) addr < (unsigned short *)((unsigned long)erraddr & ~0xF) + 0x10; addr++) { if (!((unsigned long)addr & 0xF)) - verbose_printk("\n" KERN_NOTICE "0x%p: ", addr); + verbose_printk(KERN_NOTICE "0x%p: ", addr); if (!get_instruction(&val, addr)) { val = 0; @@ -1056,9 +1055,9 @@ void dump_bfin_mem(struct pt_regs *fp) oops_in_progress)){ verbose_printk(KERN_NOTICE "Looks like this was a deferred error - sorry\n"); #ifndef CONFIG_DEBUG_HWERR - verbose_printk(KERN_NOTICE "The remaining message may be meaningless\n" - KERN_NOTICE "You should enable CONFIG_DEBUG_HWERR to get a" - " better idea where it came from\n"); + verbose_printk(KERN_NOTICE +"The remaining message may be meaningless\n" +"You should enable CONFIG_DEBUG_HWERR to get a better idea where it came from\n"); #else /* If we are handling only one peripheral interrupt * and current mm and pid are valid, and the last error @@ -1114,9 +1113,10 @@ void show_regs(struct pt_regs *fp) verbose_printk(KERN_NOTICE "%s", linux_banner); - verbose_printk(KERN_NOTICE "\n" KERN_NOTICE "SEQUENCER STATUS:\t\t%s\n", print_tainted()); + verbose_printk(KERN_NOTICE "\nSEQUENCER STATUS:\t\t%s\n", + print_tainted()); verbose_printk(KERN_NOTICE " SEQSTAT: %08lx IPEND: %04lx SYSCFG: %04lx\n", - (long)fp->seqstat, fp->ipend, fp->syscfg); + (long)fp->seqstat, fp->ipend, fp->syscfg); if ((fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR) { verbose_printk(KERN_NOTICE " HWERRCAUSE: 0x%lx\n", (fp->seqstat & SEQSTAT_HWERRCAUSE) >> 14); @@ -1184,7 +1184,7 @@ unlock: verbose_printk(KERN_NOTICE "ICPLB_FAULT_ADDR: %s\n", buf); } - verbose_printk(KERN_NOTICE "\n" KERN_NOTICE "PROCESSOR STATE:\n"); + verbose_printk(KERN_NOTICE "PROCESSOR STATE:\n"); verbose_printk(KERN_NOTICE " R0 : %08lx R1 : %08lx R2 : %08lx R3 : %08lx\n", fp->r0, fp->r1, fp->r2, fp->r3); verbose_printk(KERN_NOTICE " R4 : %08lx R5 : %08lx R6 : %08lx R7 : %08lx\n", diff --git a/arch/m68knommu/kernel/process.c b/arch/m68knommu/kernel/process.c index 1e96c6e..8f8f4ab 100644 --- a/arch/m68knommu/kernel/process.c +++ b/arch/m68knommu/kernel/process.c @@ -290,7 +290,7 @@ void dump(struct pt_regs *fp) unsigned char *tp; int i; - printk(KERN_EMERG "\n" KERN_EMERG "CURRENT PROCESS:\n" KERN_EMERG "\n"); + printk(KERN_EMERG "\nCURRENT PROCESS:\n\n"); printk(KERN_EMERG "COMM=%s PID=%d\n", current->comm, current->pid); if (current->mm) { @@ -301,8 +301,7 @@ void dump(struct pt_regs *fp) (int) current->mm->end_data, (int) current->mm->end_data, (int) current->mm->brk); - printk(KERN_EMERG "USER-STACK=%08x KERNEL-STACK=%08x\n" - KERN_EMERG "\n", + printk(KERN_EMERG "USER-STACK=%08x KERNEL-STACK=%08x\n\n", (int) current->mm->start_stack, (int)(((unsigned long) current) + THREAD_SIZE)); } @@ -313,35 +312,35 @@ void dump(struct pt_regs *fp) fp->d0, fp->d1, fp->d2, fp->d3); printk(KERN_EMERG "d4: %08lx d5: %08lx a0: %08lx a1: %08lx\n", fp->d4, fp->d5, fp->a0, fp->a1); - printk(KERN_EMERG "\n" KERN_EMERG "USP: %08x TRAPFRAME: %08x\n", + printk(KERN_EMERG "\nUSP: %08x TRAPFRAME: %08x\n", (unsigned int) rdusp(), (unsigned int) fp); - printk(KERN_EMERG "\n" KERN_EMERG "CODE:"); + printk(KERN_EMERG "\nCODE:"); tp = ((unsigned char *) fp->pc) - 0x20; for (sp = (unsigned long *) tp, i = 0; (i < 0x40); i += 4) { if ((i % 0x10) == 0) - printk("\n" KERN_EMERG "%08x: ", (int) (tp + i)); + printk(KERN_EMERG "%08x: ", (int) (tp + i)); printk("%08x ", (int) *sp++); } - printk("\n" KERN_EMERG "\n"); + printk(KERN_EMERG "\n"); printk(KERN_EMERG "KERNEL STACK:"); tp = ((unsigned char *) fp) - 0x40; for (sp = (unsigned long *) tp, i = 0; (i < 0xc0); i += 4) { if ((i % 0x10) == 0) - printk("\n" KERN_EMERG "%08x: ", (int) (tp + i)); + printk(KERN_EMERG "%08x: ", (int) (tp + i)); printk("%08x ", (int) *sp++); } - printk("\n" KERN_EMERG "\n"); + printk(KERN_EMERG "\n"); printk(KERN_EMERG "USER STACK:"); tp = (unsigned char *) (rdusp() - 0x10); for (sp = (unsigned long *) tp, i = 0; (i < 0x80); i += 4) { if ((i % 0x10) == 0) - printk("\n" KERN_EMERG "%08x: ", (int) (tp + i)); + printk(KERN_EMERG "%08x: ", (int) (tp + i)); printk("%08x ", (int) *sp++); } - printk("\n" KERN_EMERG "\n"); + printk(KERN_EMERG "\n"); } /* diff --git a/arch/m68knommu/kernel/traps.c b/arch/m68knommu/kernel/traps.c index 51d3253..3739c8f 100644 --- a/arch/m68knommu/kernel/traps.c +++ b/arch/m68knommu/kernel/traps.c @@ -111,7 +111,7 @@ static void print_this_address(unsigned long addr, int i) if (i % 5) printk(KERN_CONT " [%08lx] ", addr); else - printk(KERN_CONT "\n" KERN_EMERG " [%08lx] ", addr); + printk(KERN_EMERG " [%08lx] ", addr); i++; #endif } @@ -137,8 +137,8 @@ static void __show_stack(struct task_struct *task, unsigned long *stack) if (stack + 1 + i > endstack) break; if (i % 8 == 0) - printk("\n" KERN_EMERG " "); - printk(" %08lx", *(stack + i)); + printk(KERN_EMERG " "); + printk(KERN_CONT " %08lx", *(stack + i)); } printk("\n"); i = 0; diff --git a/arch/mn10300/kernel/traps.c b/arch/mn10300/kernel/traps.c index 681ad8c..0dfdc50 100644 --- a/arch/mn10300/kernel/traps.c +++ b/arch/mn10300/kernel/traps.c @@ -136,8 +136,7 @@ void show_trace(unsigned long *sp) unsigned long *stack, addr, module_start, module_end; int i; - printk(KERN_EMERG "\n" - KERN_EMERG "Call Trace:"); + printk(KERN_EMERG "\nCall Trace:"); stack = sp; i = 0; @@ -153,7 +152,7 @@ void show_trace(unsigned long *sp) printk("\n"); #else if ((i % 6) == 0) - printk("\n" KERN_EMERG " "); + printk(KERN_EMERG " "); printk("[<%08lx>] ", addr); i++; #endif @@ -180,7 +179,7 @@ void show_stack(struct task_struct *task, unsigned long *sp) if (((long) stack & (THREAD_SIZE - 1)) == 0) break; if ((i % 8) == 0) - printk("\n" KERN_EMERG " "); + printk(KERN_EMERG " "); printk("%08lx ", *stack++); } @@ -264,8 +263,7 @@ void show_registers(struct pt_regs *regs) show_stack(current, (unsigned long *) sp); #if 0 - printk(KERN_EMERG "\n" - KERN_EMERG "Code: "); + printk(KERN_EMERG "\nCode: "); if (regs->pc < PAGE_OFFSET) goto bad; @@ -311,16 +309,14 @@ void die(const char *str, struct pt_regs *regs, enum exception_code code) { console_verbose(); spin_lock_irq(&die_lock); - printk(KERN_EMERG "\n" - KERN_EMERG "%s: %04x\n", + printk(KERN_EMERG "\n%s: %04x\n", str, code & 0xffff); show_registers(regs); if (regs->pc >= 0x02000000 && regs->pc < 0x04000000 && (regs->epsw & (EPSW_IM | EPSW_IE)) != (EPSW_IM | EPSW_IE)) { printk(KERN_EMERG "Exception in usermode interrupt handler\n"); - printk(KERN_EMERG "\n" - KERN_EMERG " Please connect to kernel debugger !!\n"); + printk(KERN_EMERG "\nPlease connect to kernel debugger !!\n"); asm volatile ("0: bra 0b"); } @@ -429,9 +425,8 @@ asmlinkage void io_bus_error(u32 bcberr, u32 bcbear, struct pt_regs *regs) { console_verbose(); - printk(KERN_EMERG "\n" - KERN_EMERG "Asynchronous I/O Bus Error\n" - KERN_EMERG "==========================\n"); + printk(KERN_EMERG "Asynchronous I/O Bus Error\n"); + printk(KERN_EMERG "==========================\n"); if (bcberr & BCBERR_BEME) printk(KERN_EMERG "- Multiple recorded errors\n"); diff --git a/arch/parisc/kernel/process.c b/arch/parisc/kernel/process.c index 61c0707..1f3aa8d 100644 --- a/arch/parisc/kernel/process.c +++ b/arch/parisc/kernel/process.c @@ -156,7 +156,7 @@ void machine_power_off(void) * software. The user has to press the button himself. */ printk(KERN_EMERG "System shut down completed.\n" - KERN_EMERG "Please power this system off now."); + "Please power this system off now."); } void (*pm_power_off)(void) = machine_power_off; diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c index c32f5d6..528f0ff 100644 --- a/arch/parisc/kernel/traps.c +++ b/arch/parisc/kernel/traps.c @@ -250,15 +250,14 @@ void die_if_kernel(char *str, struct pt_regs *regs, long err) oops_enter(); /* Amuse the user in a SPARC fashion */ - if (err) printk( -KERN_CRIT " _______________________________ \n" -KERN_CRIT " < Your System ate a SPARC! Gah! >\n" -KERN_CRIT " ------------------------------- \n" -KERN_CRIT " \\ ^__^\n" -KERN_CRIT " \\ (xx)\\_______\n" -KERN_CRIT " (__)\\ )\\/\\\n" -KERN_CRIT " U ||----w |\n" -KERN_CRIT " || ||\n"); + if (err) printk(KERN_CRIT + " _______________________________ \n" + " < Your System ate a SPARC! Gah! >\n" + " ------------------------------- \n" + " \\ ^__^\n" + " (__)\\ )\\/\\\n" + " U ||----w |\n" + " || ||\n"); /* unlock the pdc lock if necessary */ pdc_emergency_unlock(); @@ -797,7 +796,8 @@ void notrace handle_interruption(int code, struct pt_regs *regs) else printk(KERN_DEBUG "User Fault (long pointer) (fault %d) ", code); - printk("pid=%d command='%s'\n", task_pid_nr(current), current->comm); + printk(KERN_CONT "pid=%d command='%s'\n", + task_pid_nr(current), current->comm); show_regs(regs); #endif si.si_signo = SIGSEGV; diff --git a/arch/um/kernel/sysrq.c b/arch/um/kernel/sysrq.c index 56d43d0..0960de5 100644 --- a/arch/um/kernel/sysrq.c +++ b/arch/um/kernel/sysrq.c @@ -70,8 +70,8 @@ void show_stack(struct task_struct *task, unsigned long *esp) if (kstack_end(stack)) break; if (i && ((i % 8) == 0)) - printk("\n" KERN_INFO " "); - printk("%08lx ", *stack++); + printk(KERN_INFO " "); + printk(KERN_CONT "%08lx ", *stack++); } show_trace(task, esp); diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 8fd1efb..90b5e6e 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -1739,7 +1739,6 @@ __apicdebuginit(void) print_local_APIC(void *dummy) if (apic_verbosity == APIC_QUIET) return; - printk(KERN_DEBUG "\n"); printk(KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n", smp_processor_id(), hard_smp_processor_id()); v = apic_read(APIC_ID); diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c index ae068f5..2a50ef8 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c @@ -1259,7 +1259,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) { static const char ACPI_PSS_BIOS_BUG_MSG[] = KERN_ERR FW_BUG PFX "No compatible ACPI _PSS objects found.\n" - KERN_ERR FW_BUG PFX "Try again with latest BIOS.\n"; + FW_BUG PFX "Try again with latest BIOS.\n"; struct powernow_k8_data *data; struct init_on_cpu init_on_cpu; int rc; diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index af425b8..484c1e5 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -194,14 +194,14 @@ static void print_mce(struct mce *m) m->cs, m->ip); if (m->cs == __KERNEL_CS) print_symbol("{%s}", m->ip); - printk("\n"); + printk(KERN_CONT "\n"); } printk(KERN_EMERG "TSC %llx ", m->tsc); if (m->addr) - printk("ADDR %llx ", m->addr); + printk(KERN_CONT "ADDR %llx ", m->addr); if (m->misc) - printk("MISC %llx ", m->misc); - printk("\n"); + printk(KERN_CONT "MISC %llx ", m->misc); + printk(KERN_CONT "\n"); printk(KERN_EMERG "PROCESSOR %u:%x TIME %llu SOCKET %u APIC %x\n", m->cpuvendor, m->cpuid, m->time, m->socketid, m->apicid); @@ -209,13 +209,13 @@ static void print_mce(struct mce *m) static void print_mce_head(void) { - printk(KERN_EMERG "\n" KERN_EMERG "HARDWARE ERROR\n"); + printk(KERN_EMERG "\nHARDWARE ERROR\n"); } static void print_mce_tail(void) { printk(KERN_EMERG "This is not a software problem!\n" - KERN_EMERG "Run through mcelog --ascii to decode and contact your hardware vendor\n"); + "Run through mcelog --ascii to decode and contact your hardware vendor\n"); } #define PANIC_TIMEOUT 5 /* 5 seconds */ diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index c4ca89d..5cb5725 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -627,10 +627,9 @@ __init void e820_setup_gap(void) #ifdef CONFIG_X86_64 if (!found) { gapstart = (max_pfn << PAGE_SHIFT) + 1024*1024; - printk(KERN_ERR "PCI: Warning: Cannot find a gap in the 32bit " - "address range\n" - KERN_ERR "PCI: Unassigned devices with 32bit resource " - "registers may break!\n"); + printk(KERN_ERR + "PCI: Warning: Cannot find a gap in the 32bit address range\n" + "PCI: Unassigned devices with 32bit resource registers may break!\n"); } #endif diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c index cfd9f90..d2e56b8 100644 --- a/arch/x86/kernel/pci-gart_64.c +++ b/arch/x86/kernel/pci-gart_64.c @@ -675,7 +675,7 @@ static __init int init_k8_gatt(struct agp_kern_info *info) nommu: /* Should not happen anymore */ printk(KERN_WARNING "PCI-DMA: More than 4GB of RAM and no IOMMU\n" - KERN_WARNING "falling back to iommu=soft.\n"); + "falling back to iommu=soft.\n"); return -1; } diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c index 78a5fff..85307cc 100644 --- a/arch/x86/mm/fault.c +++ b/arch/x86/mm/fault.c @@ -426,10 +426,11 @@ static noinline int vmalloc_fault(unsigned long address) } static const char errata93_warning[] = -KERN_ERR "******* Your BIOS seems to not contain a fix for K8 errata #93\n" -KERN_ERR "******* Working around it, but it may cause SEGVs or burn power.\n" -KERN_ERR "******* Please consider a BIOS update.\n" -KERN_ERR "******* Disabling USB legacy in the BIOS may also help.\n"; +KERN_ERR +"******* Your BIOS seems to not contain a fix for K8 errata #93\n" +"******* Working around it, but it may cause SEGVs or burn power.\n" +"******* Please consider a BIOS update.\n" +"******* Disabling USB legacy in the BIOS may also help.\n"; /* * No vm86 mode in 64-bit mode: diff --git a/arch/xtensa/kernel/traps.c b/arch/xtensa/kernel/traps.c index ba9ab93..e64efac 100644 --- a/arch/xtensa/kernel/traps.c +++ b/arch/xtensa/kernel/traps.c @@ -354,10 +354,10 @@ void show_regs(struct pt_regs * regs) for (i = 0; i < 16; i++) { if ((i % 8) == 0) - printk ("\n" KERN_INFO "a%02d: ", i); - printk("%08lx ", regs->areg[i]); + printk(KERN_INFO "a%02d:", i); + printk(KERN_CONT " %08lx", regs->areg[i]); } - printk("\n"); + printk(KERN_CONT "\n"); printk("pc: %08lx, ps: %08lx, depc: %08lx, excvaddr: %08lx\n", regs->pc, regs->ps, regs->depc, regs->excvaddr); -- cgit v1.1 From 44b572809581d5a10dbe35aa6bf689f32b9c5ad6 Mon Sep 17 00:00:00 2001 From: Yinghai Lu <yinghai@kernel.org> Date: Wed, 8 Jul 2009 09:50:19 -0700 Subject: x86: don't clear nodes_states[N_NORMAL_MEMORY] when numa is not compiled in Alex found that specjbb2005 still can not run with hugepages on an x86-64 machine. This only happens when numa is not compiled in. The root cause: node_set_state will not set it back for us in that case, so don't clear that when numa is not select in config [ v2: use node_clear_state instead ] Reported-and-Tested-by: Alex Shi <alex.shi@intel.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Reviewed-by: Christoph Lameter <cl@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> --- arch/x86/mm/init_64.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index b177652..6176fe8 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -598,8 +598,15 @@ void __init paging_init(void) sparse_memory_present_with_active_regions(MAX_NUMNODES); sparse_init(); - /* clear the default setting with node 0 */ - nodes_clear(node_states[N_NORMAL_MEMORY]); + + /* + * clear the default setting with node 0 + * note: don't use nodes_clear here, that is really clearing when + * numa support is not compiled in, and later node_set_state + * will not set it back. + */ + node_clear_state(0, N_NORMAL_MEMORY); + free_area_init_nodes(max_zone_pfns); } -- cgit v1.1 From a0b98ec87d7a293a7d9ab8e45935c53a68f3094a Mon Sep 17 00:00:00 2001 From: Hartley Sweeten <hartleys@visionengravers.com> Date: Mon, 6 Jul 2009 22:17:54 +0100 Subject: [ARM] 5595/1: ep93xx: missing header in dma-m2p.c <linux/io.h> was getting included by <mach/ts72xx.h>, is should be included by this file. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> --- arch/arm/mach-ep93xx/dma-m2p.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-ep93xx/dma-m2p.c b/arch/arm/mach-ep93xx/dma-m2p.c index a2df5bb..dbcac9c4 100644 --- a/arch/arm/mach-ep93xx/dma-m2p.c +++ b/arch/arm/mach-ep93xx/dma-m2p.c @@ -33,6 +33,7 @@ #include <linux/err.h> #include <linux/interrupt.h> #include <linux/module.h> +#include <linux/io.h> #include <mach/dma.h> #include <mach/hardware.h> -- cgit v1.1 From 6860107a46c8762d35eb7bf71bcf6c6510793b76 Mon Sep 17 00:00:00 2001 From: Linus Walleij <linus.walleij@stericsson.com> Date: Mon, 6 Jul 2009 18:04:28 +0100 Subject: [ARM] 5594/1: Correct U300 VIC init PM setting This makes the VIC resume from suspend flagged IRQ:s identical to the flags indicating all possible interrupts. This is perhaps not the optimal setting but setting it to 0 makes the system suspend and never come back again (all IRQ sources masked off). Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> --- arch/arm/mach-u300/core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c index 89b3ccf..7936085 100644 --- a/arch/arm/mach-u300/core.c +++ b/arch/arm/mach-u300/core.c @@ -455,8 +455,8 @@ void __init u300_init_irq(void) for (i = 0; i < NR_IRQS; i++) set_bit(i, (unsigned long *) &mask[0]); u300_enable_intcon_clock(); - vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], 0); - vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], 0); + vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], mask[0]); + vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], mask[1]); } -- cgit v1.1 From ad46276952f1af34cd91d46d49ba13d347d56367 Mon Sep 17 00:00:00 2001 From: Jiri Olsa <jolsa@redhat.com> Date: Wed, 8 Jul 2009 12:10:31 +0000 Subject: memory barrier: adding smp_mb__after_lock Adding smp_mb__after_lock define to be used as a smp_mb call after a lock. Making it nop for x86, since {read|write|spin}_lock() on x86 are full memory barriers. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> --- arch/x86/include/asm/spinlock.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/x86/include/asm/spinlock.h b/arch/x86/include/asm/spinlock.h index b7e5db8..4e77853 100644 --- a/arch/x86/include/asm/spinlock.h +++ b/arch/x86/include/asm/spinlock.h @@ -302,4 +302,8 @@ static inline void __raw_write_unlock(raw_rwlock_t *rw) #define _raw_read_relax(lock) cpu_relax() #define _raw_write_relax(lock) cpu_relax() +/* The {read|write|spin}_lock() on x86 are full memory barriers. */ +static inline void smp_mb__after_lock(void) { } +#define ARCH_HAS_SMP_MB_AFTER_LOCK + #endif /* _ASM_X86_SPINLOCK_H */ -- cgit v1.1 From 8d7ff4f2a0b22b7d6d7bc3982257d1dadea22824 Mon Sep 17 00:00:00 2001 From: Robert Richter <robert.richter@amd.com> Date: Tue, 23 Jun 2009 11:48:14 +0200 Subject: x86/oprofile: rename kernel parameter for architectural perfmon to arch_perfmon The short name of the achitecture is 'arch_perfmon'. This patch changes the kernel parameter to use this name. Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/oprofile/nmi_int.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c index b07dd8d..89b9a5c 100644 --- a/arch/x86/oprofile/nmi_int.c +++ b/arch/x86/oprofile/nmi_int.c @@ -390,7 +390,7 @@ static int __init p4_init(char **cpu_type) static int force_arch_perfmon; static int force_cpu_type(const char *str, struct kernel_param *kp) { - if (!strcmp(str, "archperfmon")) { + if (!strcmp(str, "arch_perfmon")) { force_arch_perfmon = 1; printk(KERN_INFO "oprofile: forcing architectural perfmon\n"); } -- cgit v1.1 From 11d1578f9454159c43499d1d8fe8a7d728c176a3 Mon Sep 17 00:00:00 2001 From: Vince Weaver <vince@deater.net> Date: Wed, 8 Jul 2009 17:46:14 -0400 Subject: perf_counter: Add P6 PMU support Add basic P6 PMU support. The P6 uses the EVNTSEL0 EN bit to enable/disable both its counters. We use this for the global enable/disable, and clear all config bits (except EN) to disable individual counters. Actual ia32 hardware doesn't support lfence, so use a locked op without side-effect to implement a full barrier. perf stat and perf record seem to function correctly. [a.p.zijlstra@chello.nl: cleanups and complete the enable/disable code] Signed-off-by: Vince Weaver <vince@deater.net> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <Pine.LNX.4.64.0907081718450.2715@pianoman.cluster.toy> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/kernel/cpu/perf_counter.c | 227 ++++++++++++++++++++++++++++++++++--- 1 file changed, 213 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c index 36c3dc7..1910f39 100644 --- a/arch/x86/kernel/cpu/perf_counter.c +++ b/arch/x86/kernel/cpu/perf_counter.c @@ -66,6 +66,44 @@ static DEFINE_PER_CPU(struct cpu_hw_counters, cpu_hw_counters) = { }; /* + * Not sure about some of these + */ +static const u64 p6_perfmon_event_map[] = +{ + [PERF_COUNT_HW_CPU_CYCLES] = 0x0079, + [PERF_COUNT_HW_INSTRUCTIONS] = 0x00c0, + [PERF_COUNT_HW_CACHE_REFERENCES] = 0x0000, + [PERF_COUNT_HW_CACHE_MISSES] = 0x0000, + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x00c4, + [PERF_COUNT_HW_BRANCH_MISSES] = 0x00c5, + [PERF_COUNT_HW_BUS_CYCLES] = 0x0062, +}; + +static u64 p6_pmu_event_map(int event) +{ + return p6_perfmon_event_map[event]; +} + +static u64 p6_pmu_raw_event(u64 event) +{ +#define P6_EVNTSEL_EVENT_MASK 0x000000FFULL +#define P6_EVNTSEL_UNIT_MASK 0x0000FF00ULL +#define P6_EVNTSEL_EDGE_MASK 0x00040000ULL +#define P6_EVNTSEL_INV_MASK 0x00800000ULL +#define P6_EVNTSEL_COUNTER_MASK 0xFF000000ULL + +#define P6_EVNTSEL_MASK \ + (P6_EVNTSEL_EVENT_MASK | \ + P6_EVNTSEL_UNIT_MASK | \ + P6_EVNTSEL_EDGE_MASK | \ + P6_EVNTSEL_INV_MASK | \ + P6_EVNTSEL_COUNTER_MASK) + + return event & P6_EVNTSEL_MASK; +} + + +/* * Intel PerfMon v3. Used on Core2 and later. */ static const u64 intel_perfmon_event_map[] = @@ -726,6 +764,23 @@ static int __hw_perf_counter_init(struct perf_counter *counter) return 0; } +static void p6_pmu_disable_all(void) +{ + struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters); + unsigned long val; + + if (!cpuc->enabled) + return; + + cpuc->enabled = 0; + barrier(); + + /* p6 only has one enable register */ + rdmsrl(MSR_P6_EVNTSEL0, val); + val &= ~ARCH_PERFMON_EVENTSEL0_ENABLE; + wrmsrl(MSR_P6_EVNTSEL0, val); +} + static void intel_pmu_disable_all(void) { wrmsrl(MSR_CORE_PERF_GLOBAL_CTRL, 0); @@ -767,6 +822,23 @@ void hw_perf_disable(void) return x86_pmu.disable_all(); } +static void p6_pmu_enable_all(void) +{ + struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters); + unsigned long val; + + if (cpuc->enabled) + return; + + cpuc->enabled = 1; + barrier(); + + /* p6 only has one enable register */ + rdmsrl(MSR_P6_EVNTSEL0, val); + val |= ARCH_PERFMON_EVENTSEL0_ENABLE; + wrmsrl(MSR_P6_EVNTSEL0, val); +} + static void intel_pmu_enable_all(void) { wrmsrl(MSR_CORE_PERF_GLOBAL_CTRL, x86_pmu.intel_ctrl); @@ -819,16 +891,13 @@ static inline void intel_pmu_ack_status(u64 ack) static inline void x86_pmu_enable_counter(struct hw_perf_counter *hwc, int idx) { - int err; - err = checking_wrmsrl(hwc->config_base + idx, + (void)checking_wrmsrl(hwc->config_base + idx, hwc->config | ARCH_PERFMON_EVENTSEL0_ENABLE); } static inline void x86_pmu_disable_counter(struct hw_perf_counter *hwc, int idx) { - int err; - err = checking_wrmsrl(hwc->config_base + idx, - hwc->config); + (void)checking_wrmsrl(hwc->config_base + idx, hwc->config); } static inline void @@ -836,13 +905,24 @@ intel_pmu_disable_fixed(struct hw_perf_counter *hwc, int __idx) { int idx = __idx - X86_PMC_IDX_FIXED; u64 ctrl_val, mask; - int err; mask = 0xfULL << (idx * 4); rdmsrl(hwc->config_base, ctrl_val); ctrl_val &= ~mask; - err = checking_wrmsrl(hwc->config_base, ctrl_val); + (void)checking_wrmsrl(hwc->config_base, ctrl_val); +} + +static inline void +p6_pmu_disable_counter(struct hw_perf_counter *hwc, int idx) +{ + struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters); + unsigned long val = ARCH_PERFMON_EVENTSEL0_ENABLE; + + if (!cpuc->enabled) + val = 0; + + (void)checking_wrmsrl(hwc->config_base + idx, val); } static inline void @@ -943,6 +1023,17 @@ intel_pmu_enable_fixed(struct hw_perf_counter *hwc, int __idx) err = checking_wrmsrl(hwc->config_base, ctrl_val); } +static void p6_pmu_enable_counter(struct hw_perf_counter *hwc, int idx) +{ + struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters); + + if (cpuc->enabled) + x86_pmu_enable_counter(hwc, idx); + else + x86_pmu_disable_counter(hwc, idx); +} + + static void intel_pmu_enable_counter(struct hw_perf_counter *hwc, int idx) { if (unlikely(hwc->config_base == MSR_ARCH_PERFMON_FIXED_CTR_CTRL)) { @@ -1176,6 +1267,49 @@ static void intel_pmu_reset(void) local_irq_restore(flags); } +static int p6_pmu_handle_irq(struct pt_regs *regs) +{ + struct perf_sample_data data; + struct cpu_hw_counters *cpuc; + struct perf_counter *counter; + struct hw_perf_counter *hwc; + int idx, handled = 0; + u64 val; + + data.regs = regs; + data.addr = 0; + + cpuc = &__get_cpu_var(cpu_hw_counters); + + for (idx = 0; idx < x86_pmu.num_counters; idx++) { + if (!test_bit(idx, cpuc->active_mask)) + continue; + + counter = cpuc->counters[idx]; + hwc = &counter->hw; + + val = x86_perf_counter_update(counter, hwc, idx); + if (val & (1ULL << (x86_pmu.counter_bits - 1))) + continue; + + /* + * counter overflow + */ + handled = 1; + data.period = counter->hw.last_period; + + if (!x86_perf_counter_set_period(counter, hwc, idx)) + continue; + + if (perf_counter_overflow(counter, 1, &data)) + p6_pmu_disable_counter(hwc, idx); + } + + if (handled) + inc_irq_stat(apic_perf_irqs); + + return handled; +} /* * This handler is triggered by the local APIC, so the APIC IRQ handling @@ -1185,14 +1319,13 @@ static int intel_pmu_handle_irq(struct pt_regs *regs) { struct perf_sample_data data; struct cpu_hw_counters *cpuc; - int bit, cpu, loops; + int bit, loops; u64 ack, status; data.regs = regs; data.addr = 0; - cpu = smp_processor_id(); - cpuc = &per_cpu(cpu_hw_counters, cpu); + cpuc = &__get_cpu_var(cpu_hw_counters); perf_disable(); status = intel_pmu_get_status(); @@ -1249,14 +1382,13 @@ static int amd_pmu_handle_irq(struct pt_regs *regs) struct cpu_hw_counters *cpuc; struct perf_counter *counter; struct hw_perf_counter *hwc; - int cpu, idx, handled = 0; + int idx, handled = 0; u64 val; data.regs = regs; data.addr = 0; - cpu = smp_processor_id(); - cpuc = &per_cpu(cpu_hw_counters, cpu); + cpuc = &__get_cpu_var(cpu_hw_counters); for (idx = 0; idx < x86_pmu.num_counters; idx++) { if (!test_bit(idx, cpuc->active_mask)) @@ -1353,6 +1485,32 @@ static __read_mostly struct notifier_block perf_counter_nmi_notifier = { .priority = 1 }; +static struct x86_pmu p6_pmu = { + .name = "p6", + .handle_irq = p6_pmu_handle_irq, + .disable_all = p6_pmu_disable_all, + .enable_all = p6_pmu_enable_all, + .enable = p6_pmu_enable_counter, + .disable = p6_pmu_disable_counter, + .eventsel = MSR_P6_EVNTSEL0, + .perfctr = MSR_P6_PERFCTR0, + .event_map = p6_pmu_event_map, + .raw_event = p6_pmu_raw_event, + .max_events = ARRAY_SIZE(p6_perfmon_event_map), + .max_period = (1ULL << 31) - 1, + .version = 0, + .num_counters = 2, + /* + * Counters have 40 bits implemented. However they are designed such + * that bits [32-39] are sign extensions of bit 31. As such the + * effective width of a counter for P6-like PMU is 32 bits only. + * + * See IA-32 Intel Architecture Software developer manual Vol 3B + */ + .counter_bits = 32, + .counter_mask = (1ULL << 32) - 1, +}; + static struct x86_pmu intel_pmu = { .name = "Intel", .handle_irq = intel_pmu_handle_irq, @@ -1392,6 +1550,41 @@ static struct x86_pmu amd_pmu = { .max_period = (1ULL << 47) - 1, }; +static int p6_pmu_init(void) +{ + int high, low; + + switch (boot_cpu_data.x86_model) { + case 1: + case 3: /* Pentium Pro */ + case 5: + case 6: /* Pentium II */ + case 7: + case 8: + case 11: /* Pentium III */ + break; + case 9: + case 13: + /* for Pentium M, we need to check if PMU exist */ + rdmsr(MSR_IA32_MISC_ENABLE, low, high); + if (low & MSR_IA32_MISC_ENABLE_EMON) + break; + default: + pr_cont("unsupported p6 CPU model %d ", + boot_cpu_data.x86_model); + return -ENODEV; + } + + if (!cpu_has_apic) { + pr_info("no Local APIC, try rebooting with lapic"); + return -ENODEV; + } + + x86_pmu = p6_pmu; + + return 0; +} + static int intel_pmu_init(void) { union cpuid10_edx edx; @@ -1400,8 +1593,14 @@ static int intel_pmu_init(void) unsigned int ebx; int version; - if (!cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) + if (!cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) { + /* check for P6 processor family */ + if (boot_cpu_data.x86 == 6) { + return p6_pmu_init(); + } else { return -ENODEV; + } + } /* * Check whether the Architectural PerfMon supports -- cgit v1.1 From 9c74fb50867e8fb5f3be3be06716492c0f79309e Mon Sep 17 00:00:00 2001 From: Peter Zijlstra <a.p.zijlstra@chello.nl> Date: Wed, 8 Jul 2009 10:21:41 +0200 Subject: perf_counter: Fix up P6 PMU details The P6 doesn't seem to support cache ref/hit/miss counts, so we extend the generic hardware event codes to have 0 and -1 mean the same thing as for the generic cache events. Furthermore, it turns out the 0 event does not count (that is, its reported that on PPro it actually does count something), therefore use a event configuration that's specified not to count to disable the counters. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/kernel/cpu/perf_counter.c | 28 +++++++++++++++++++++++----- 1 file changed, 23 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c index 1910f39..c7cc6ea 100644 --- a/arch/x86/kernel/cpu/perf_counter.c +++ b/arch/x86/kernel/cpu/perf_counter.c @@ -84,6 +84,14 @@ static u64 p6_pmu_event_map(int event) return p6_perfmon_event_map[event]; } +/* + * Counter setting that is specified not to count anything. + * We use this to effectively disable a counter. + * + * L2_RQSTS with 0 MESI unit mask. + */ +#define P6_NOP_COUNTER 0x0000002EULL + static u64 p6_pmu_raw_event(u64 event) { #define P6_EVNTSEL_EVENT_MASK 0x000000FFULL @@ -704,6 +712,7 @@ static int __hw_perf_counter_init(struct perf_counter *counter) { struct perf_counter_attr *attr = &counter->attr; struct hw_perf_counter *hwc = &counter->hw; + u64 config; int err; if (!x86_pmu_initialized()) @@ -756,10 +765,19 @@ static int __hw_perf_counter_init(struct perf_counter *counter) if (attr->config >= x86_pmu.max_events) return -EINVAL; + /* * The generic map: */ - hwc->config |= x86_pmu.event_map(attr->config); + config = x86_pmu.event_map(attr->config); + + if (config == 0) + return -ENOENT; + + if (config == -1LL) + return -EINVAL; + + hwc->config |= config; return 0; } @@ -767,7 +785,7 @@ static int __hw_perf_counter_init(struct perf_counter *counter) static void p6_pmu_disable_all(void) { struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters); - unsigned long val; + u64 val; if (!cpuc->enabled) return; @@ -917,10 +935,10 @@ static inline void p6_pmu_disable_counter(struct hw_perf_counter *hwc, int idx) { struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters); - unsigned long val = ARCH_PERFMON_EVENTSEL0_ENABLE; + u64 val = P6_NOP_COUNTER; - if (!cpuc->enabled) - val = 0; + if (cpuc->enabled) + val |= ARCH_PERFMON_EVENTSEL0_ENABLE; (void)checking_wrmsrl(hwc->config_base + idx, val); } -- cgit v1.1 From 984b838ce69c063a91b87550598ab7f3439dd94a Mon Sep 17 00:00:00 2001 From: Peter Zijlstra <a.p.zijlstra@chello.nl> Date: Fri, 10 Jul 2009 09:59:56 +0200 Subject: perf_counter: Clean up global vs counter enable Ingo noticed that both AMD and P6 call x86_pmu_disable_counter() on *_pmu_enable_counter(). This is because we rely on the side effect of that call to program the event config but not touch the EN bit. We change that for AMD by having enable_all() simply write the full config in, and for P6 by explicitly coding it. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/kernel/cpu/perf_counter.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c index c7cc6ea..bed1c4c 100644 --- a/arch/x86/kernel/cpu/perf_counter.c +++ b/arch/x86/kernel/cpu/perf_counter.c @@ -874,13 +874,13 @@ static void amd_pmu_enable_all(void) barrier(); for (idx = 0; idx < x86_pmu.num_counters; idx++) { + struct perf_counter *counter = cpuc->counters[idx]; u64 val; if (!test_bit(idx, cpuc->active_mask)) continue; - rdmsrl(MSR_K7_EVNTSEL0 + idx, val); - if (val & ARCH_PERFMON_EVENTSEL0_ENABLE) - continue; + + val = counter->hw.config; val |= ARCH_PERFMON_EVENTSEL0_ENABLE; wrmsrl(MSR_K7_EVNTSEL0 + idx, val); } @@ -1044,11 +1044,13 @@ intel_pmu_enable_fixed(struct hw_perf_counter *hwc, int __idx) static void p6_pmu_enable_counter(struct hw_perf_counter *hwc, int idx) { struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters); + u64 val; + val = hwc->config; if (cpuc->enabled) - x86_pmu_enable_counter(hwc, idx); - else - x86_pmu_disable_counter(hwc, idx); + val |= ARCH_PERFMON_EVENTSEL0_ENABLE; + + (void)checking_wrmsrl(hwc->config_base + idx, val); } @@ -1068,8 +1070,6 @@ static void amd_pmu_enable_counter(struct hw_perf_counter *hwc, int idx) if (cpuc->enabled) x86_pmu_enable_counter(hwc, idx); - else - x86_pmu_disable_counter(hwc, idx); } static int -- cgit v1.1 From 8aa7e847d834ed937a9ad37a0f2ad5b8584c1ab0 Mon Sep 17 00:00:00 2001 From: Jens Axboe <jens.axboe@oracle.com> Date: Thu, 9 Jul 2009 14:52:32 +0200 Subject: Fix congestion_wait() sync/async vs read/write confusion Commit 1faa16d22877f4839bd433547d770c676d1d964c accidentally broke the bdi congestion wait queue logic, causing us to wait on congestion for WRITE (== 1) when we really wanted BLK_RW_ASYNC (== 0) instead. Signed-off-by: Jens Axboe <jens.axboe@oracle.com> --- arch/x86/lib/usercopy_32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/lib/usercopy_32.c b/arch/x86/lib/usercopy_32.c index 7c8ca91..1f118d4 100644 --- a/arch/x86/lib/usercopy_32.c +++ b/arch/x86/lib/usercopy_32.c @@ -751,7 +751,7 @@ survive: if (retval == -ENOMEM && is_global_init(current)) { up_read(¤t->mm->mmap_sem); - congestion_wait(WRITE, HZ/50); + congestion_wait(BLK_RW_ASYNC, HZ/50); goto survive; } -- cgit v1.1 From 857fdc53a0a90c3ba7fcf5b1fb4c7a62ae03cf82 Mon Sep 17 00:00:00 2001 From: Yinghai Lu <yinghai@kernel.org> Date: Fri, 10 Jul 2009 09:36:20 -0700 Subject: x86/pci: insert ioapic resource before assigning unassigned resources Stephen reported that his DL585 G2 needed noapic after 2.6.22 (?) Dann bisected it down to: commit 30a18d6c3f1e774de656ebd8ff219d53e2ba4029 Date: Tue Feb 19 03:21:20 2008 -0800 x86: multi pci root bus with different io resource range, on 64-bit It turns out that: 1. that AMD-based systems have two HT chains. 2. BIOS doesn't allocate resources for BAR 6 of devices under 8132 etc 3. that multi-peer-root patch will try to split root resources to peer root resources according to PCI conf of NB 4. PCI core assigns unassigned resources, but they overlap with BARs that are used by ioapic addr of io4 and 8132. The reason: at that point ioapic address are not inserted yet. Solution is to insert ioapic resources into the tree a bit earlier. Reported-by: Stephen Frost <sfrost@snowman.net> Reported-and-Tested-by: dann frazier <dannf@hp.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: stable@kernel.org Signed-off-by: Jesse Barnes <jbarnes@jbarnes-g45.(none)> --- arch/x86/include/asm/io_apic.h | 2 ++ arch/x86/kernel/apic/io_apic.c | 14 +++----------- arch/x86/pci/i386.c | 7 +++++++ 3 files changed, 12 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h index daf866e..330ee80 100644 --- a/arch/x86/include/asm/io_apic.h +++ b/arch/x86/include/asm/io_apic.h @@ -161,6 +161,7 @@ extern int io_apic_set_pci_routing(struct device *dev, int irq, struct io_apic_irq_attr *irq_attr); extern int (*ioapic_renumber_irq)(int ioapic, int irq); extern void ioapic_init_mappings(void); +extern void ioapic_insert_resources(void); extern struct IO_APIC_route_entry **alloc_ioapic_entries(void); extern void free_ioapic_entries(struct IO_APIC_route_entry **ioapic_entries); @@ -180,6 +181,7 @@ extern void ioapic_write_entry(int apic, int pin, #define io_apic_assign_pci_irqs 0 static const int timer_through_8259 = 0; static inline void ioapic_init_mappings(void) { } +static inline void ioapic_insert_resources(void) { } static inline void probe_nr_irqs_gsi(void) { } #endif diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 90b5e6e..2284a48 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -4181,28 +4181,20 @@ fake_ioapic_page: } } -static int __init ioapic_insert_resources(void) +void __init ioapic_insert_resources(void) { int i; struct resource *r = ioapic_resources; if (!r) { - if (nr_ioapics > 0) { + if (nr_ioapics > 0) printk(KERN_ERR "IO APIC resources couldn't be allocated.\n"); - return -1; - } - return 0; + return; } for (i = 0; i < nr_ioapics; i++) { insert_resource(&iomem_resource, r); r++; } - - return 0; } - -/* Insert the IO APIC resources after PCI initialization has occured to handle - * IO APICS that are mapped in on a BAR in PCI space. */ -late_initcall(ioapic_insert_resources); diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c index 0fb56db..52e62e5 100644 --- a/arch/x86/pci/i386.c +++ b/arch/x86/pci/i386.c @@ -35,6 +35,7 @@ #include <asm/pat.h> #include <asm/e820.h> #include <asm/pci_x86.h> +#include <asm/io_apic.h> static int @@ -227,6 +228,12 @@ void __init pcibios_resource_survey(void) pcibios_allocate_resources(1); e820_reserve_resources_late(); + /* + * Insert the IO APIC resources after PCI initialization has + * occured to handle IO APICS that are mapped in on a BAR in + * PCI space, but before trying to assign unassigned pci res. + */ + ioapic_insert_resources(); } /** -- cgit v1.1 From c99e6efe1ba04561e7d93a81f0be07e37427e835 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra <a.p.zijlstra@chello.nl> Date: Fri, 10 Jul 2009 14:57:56 +0200 Subject: sched: INIT_PREEMPT_COUNT Pull the initial preempt_count value into a single definition site. Maintainers for: alpha, ia64 and m68k, please have a look, your arch code is funny. The header magic is a bit odd, but similar to the KERNEL_DS one, CPP waits with expanding these macros until the INIT_THREAD_INFO macro itself is expanded, which is in arch/*/kernel/init_task.c where we've already included sched.h so we're good. Cc: tony.luck@intel.com Cc: rth@twiddle.net Cc: geert@linux-m68k.org Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> --- arch/alpha/include/asm/thread_info.h | 1 + arch/arm/include/asm/thread_info.h | 2 +- arch/avr32/include/asm/thread_info.h | 2 +- arch/blackfin/include/asm/thread_info.h | 2 +- arch/cris/include/asm/thread_info.h | 4 +--- arch/frv/include/asm/thread_info.h | 4 +--- arch/h8300/include/asm/thread_info.h | 2 +- arch/ia64/include/asm/thread_info.h | 2 +- arch/m32r/include/asm/thread_info.h | 4 +--- arch/m68k/include/asm/thread_info_mm.h | 1 + arch/m68k/include/asm/thread_info_no.h | 1 + arch/microblaze/include/asm/thread_info.h | 4 +--- arch/mips/include/asm/thread_info.h | 4 +--- arch/mn10300/include/asm/thread_info.h | 4 +--- arch/parisc/include/asm/thread_info.h | 2 +- arch/powerpc/include/asm/thread_info.h | 4 +--- arch/s390/include/asm/thread_info.h | 2 +- arch/sh/include/asm/thread_info.h | 2 +- arch/sparc/include/asm/thread_info_32.h | 4 +--- arch/sparc/include/asm/thread_info_64.h | 4 +--- arch/um/include/asm/thread_info.h | 2 +- arch/x86/include/asm/thread_info.h | 2 +- arch/xtensa/include/asm/thread_info.h | 4 +--- 23 files changed, 23 insertions(+), 40 deletions(-) (limited to 'arch') diff --git a/arch/alpha/include/asm/thread_info.h b/arch/alpha/include/asm/thread_info.h index d069526..60c83ab 100644 --- a/arch/alpha/include/asm/thread_info.h +++ b/arch/alpha/include/asm/thread_info.h @@ -37,6 +37,7 @@ struct thread_info { .task = &tsk, \ .exec_domain = &default_exec_domain, \ .addr_limit = KERNEL_DS, \ + .preempt_count = INIT_PREEMPT_COUNT, \ .restart_block = { \ .fn = do_no_restart_syscall, \ }, \ diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h index 4f88482..73394e5 100644 --- a/arch/arm/include/asm/thread_info.h +++ b/arch/arm/include/asm/thread_info.h @@ -73,7 +73,7 @@ struct thread_info { .task = &tsk, \ .exec_domain = &default_exec_domain, \ .flags = 0, \ - .preempt_count = 1, \ + .preempt_count = INIT_PREEMPT_COUNT, \ .addr_limit = KERNEL_DS, \ .cpu_domain = domain_val(DOMAIN_USER, DOMAIN_MANAGER) | \ domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) | \ diff --git a/arch/avr32/include/asm/thread_info.h b/arch/avr32/include/asm/thread_info.h index 4442f8d..fc42de5 100644 --- a/arch/avr32/include/asm/thread_info.h +++ b/arch/avr32/include/asm/thread_info.h @@ -40,7 +40,7 @@ struct thread_info { .exec_domain = &default_exec_domain, \ .flags = 0, \ .cpu = 0, \ - .preempt_count = 1, \ + .preempt_count = INIT_PREEMPT_COUNT, \ .restart_block = { \ .fn = do_no_restart_syscall \ } \ diff --git a/arch/blackfin/include/asm/thread_info.h b/arch/blackfin/include/asm/thread_info.h index 2920087..2bbfdd9 100644 --- a/arch/blackfin/include/asm/thread_info.h +++ b/arch/blackfin/include/asm/thread_info.h @@ -77,7 +77,7 @@ struct thread_info { .exec_domain = &default_exec_domain, \ .flags = 0, \ .cpu = 0, \ - .preempt_count = 1, \ + .preempt_count = INIT_PREEMPT_COUNT, \ .restart_block = { \ .fn = do_no_restart_syscall, \ }, \ diff --git a/arch/cris/include/asm/thread_info.h b/arch/cris/include/asm/thread_info.h index bc5b293..c3aade3 100644 --- a/arch/cris/include/asm/thread_info.h +++ b/arch/cris/include/asm/thread_info.h @@ -50,8 +50,6 @@ struct thread_info { /* * macros/functions for gaining access to the thread information structure - * - * preempt_count needs to be 1 initially, until the scheduler is functional. */ #ifndef __ASSEMBLY__ #define INIT_THREAD_INFO(tsk) \ @@ -60,7 +58,7 @@ struct thread_info { .exec_domain = &default_exec_domain, \ .flags = 0, \ .cpu = 0, \ - .preempt_count = 1, \ + .preempt_count = INIT_PREEMPT_COUNT, \ .addr_limit = KERNEL_DS, \ .restart_block = { \ .fn = do_no_restart_syscall, \ diff --git a/arch/frv/include/asm/thread_info.h b/arch/frv/include/asm/thread_info.h index e8a5ed7..e608e05 100644 --- a/arch/frv/include/asm/thread_info.h +++ b/arch/frv/include/asm/thread_info.h @@ -56,8 +56,6 @@ struct thread_info { /* * macros/functions for gaining access to the thread information structure - * - * preempt_count needs to be 1 initially, until the scheduler is functional. */ #ifndef __ASSEMBLY__ @@ -67,7 +65,7 @@ struct thread_info { .exec_domain = &default_exec_domain, \ .flags = 0, \ .cpu = 0, \ - .preempt_count = 1, \ + .preempt_count = INIT_PREEMPT_COUNT, \ .addr_limit = KERNEL_DS, \ .restart_block = { \ .fn = do_no_restart_syscall, \ diff --git a/arch/h8300/include/asm/thread_info.h b/arch/h8300/include/asm/thread_info.h index 700014d..8bbc8b0 100644 --- a/arch/h8300/include/asm/thread_info.h +++ b/arch/h8300/include/asm/thread_info.h @@ -36,7 +36,7 @@ struct thread_info { .exec_domain = &default_exec_domain, \ .flags = 0, \ .cpu = 0, \ - .preempt_count = 1, \ + .preempt_count = INIT_PREEMPT_COUNT, \ .restart_block = { \ .fn = do_no_restart_syscall, \ }, \ diff --git a/arch/ia64/include/asm/thread_info.h b/arch/ia64/include/asm/thread_info.h index ae69226..8ce2e38 100644 --- a/arch/ia64/include/asm/thread_info.h +++ b/arch/ia64/include/asm/thread_info.h @@ -48,7 +48,7 @@ struct thread_info { .flags = 0, \ .cpu = 0, \ .addr_limit = KERNEL_DS, \ - .preempt_count = 0, \ + .preempt_count = INIT_PREEMPT_COUNT, \ .restart_block = { \ .fn = do_no_restart_syscall, \ }, \ diff --git a/arch/m32r/include/asm/thread_info.h b/arch/m32r/include/asm/thread_info.h index 8589d46..07bb5bd 100644 --- a/arch/m32r/include/asm/thread_info.h +++ b/arch/m32r/include/asm/thread_info.h @@ -57,8 +57,6 @@ struct thread_info { /* * macros/functions for gaining access to the thread information structure - * - * preempt_count needs to be 1 initially, until the scheduler is functional. */ #ifndef __ASSEMBLY__ @@ -68,7 +66,7 @@ struct thread_info { .exec_domain = &default_exec_domain, \ .flags = 0, \ .cpu = 0, \ - .preempt_count = 1, \ + .preempt_count = INIT_PREEMPT_COUNT, \ .addr_limit = KERNEL_DS, \ .restart_block = { \ .fn = do_no_restart_syscall, \ diff --git a/arch/m68k/include/asm/thread_info_mm.h b/arch/m68k/include/asm/thread_info_mm.h index af0fda4..6ea5c33 100644 --- a/arch/m68k/include/asm/thread_info_mm.h +++ b/arch/m68k/include/asm/thread_info_mm.h @@ -19,6 +19,7 @@ struct thread_info { { \ .task = &tsk, \ .exec_domain = &default_exec_domain, \ + .preempt_count = INIT_PREEMPT_COUNT, \ .restart_block = { \ .fn = do_no_restart_syscall, \ }, \ diff --git a/arch/m68k/include/asm/thread_info_no.h b/arch/m68k/include/asm/thread_info_no.h index 82529f4..c2bde5e 100644 --- a/arch/m68k/include/asm/thread_info_no.h +++ b/arch/m68k/include/asm/thread_info_no.h @@ -49,6 +49,7 @@ struct thread_info { .exec_domain = &default_exec_domain, \ .flags = 0, \ .cpu = 0, \ + .preempt_count = INIT_PREEMPT_COUNT, \ .restart_block = { \ .fn = do_no_restart_syscall, \ }, \ diff --git a/arch/microblaze/include/asm/thread_info.h b/arch/microblaze/include/asm/thread_info.h index 7fac444..6e92885 100644 --- a/arch/microblaze/include/asm/thread_info.h +++ b/arch/microblaze/include/asm/thread_info.h @@ -75,8 +75,6 @@ struct thread_info { /* * macros/functions for gaining access to the thread information structure - * - * preempt_count needs to be 1 initially, until the scheduler is functional. */ #define INIT_THREAD_INFO(tsk) \ { \ @@ -84,7 +82,7 @@ struct thread_info { .exec_domain = &default_exec_domain, \ .flags = 0, \ .cpu = 0, \ - .preempt_count = 1, \ + .preempt_count = INIT_PREEMPT_COUNT, \ .addr_limit = KERNEL_DS, \ .restart_block = { \ .fn = do_no_restart_syscall, \ diff --git a/arch/mips/include/asm/thread_info.h b/arch/mips/include/asm/thread_info.h index 143a481..f9df720 100644 --- a/arch/mips/include/asm/thread_info.h +++ b/arch/mips/include/asm/thread_info.h @@ -39,8 +39,6 @@ struct thread_info { /* * macros/functions for gaining access to the thread information structure - * - * preempt_count needs to be 1 initially, until the scheduler is functional. */ #define INIT_THREAD_INFO(tsk) \ { \ @@ -48,7 +46,7 @@ struct thread_info { .exec_domain = &default_exec_domain, \ .flags = _TIF_FIXADE, \ .cpu = 0, \ - .preempt_count = 1, \ + .preempt_count = INIT_PREEMPT_COUNT, \ .addr_limit = KERNEL_DS, \ .restart_block = { \ .fn = do_no_restart_syscall, \ diff --git a/arch/mn10300/include/asm/thread_info.h b/arch/mn10300/include/asm/thread_info.h index 78a3881..58d64f8 100644 --- a/arch/mn10300/include/asm/thread_info.h +++ b/arch/mn10300/include/asm/thread_info.h @@ -65,8 +65,6 @@ struct thread_info { /* * macros/functions for gaining access to the thread information structure - * - * preempt_count needs to be 1 initially, until the scheduler is functional. */ #ifndef __ASSEMBLY__ @@ -76,7 +74,7 @@ struct thread_info { .exec_domain = &default_exec_domain, \ .flags = 0, \ .cpu = 0, \ - .preempt_count = 1, \ + .preempt_count = INIT_PREEMPT_COUNT, \ .addr_limit = KERNEL_DS, \ .restart_block = { \ .fn = do_no_restart_syscall, \ diff --git a/arch/parisc/include/asm/thread_info.h b/arch/parisc/include/asm/thread_info.h index 0407959..4ce0edf 100644 --- a/arch/parisc/include/asm/thread_info.h +++ b/arch/parisc/include/asm/thread_info.h @@ -23,7 +23,7 @@ struct thread_info { .flags = 0, \ .cpu = 0, \ .addr_limit = KERNEL_DS, \ - .preempt_count = 1, \ + .preempt_count = INIT_PREEMPT_COUNT, \ .restart_block = { \ .fn = do_no_restart_syscall \ } \ diff --git a/arch/powerpc/include/asm/thread_info.h b/arch/powerpc/include/asm/thread_info.h index 9aba5a3..c8b3292 100644 --- a/arch/powerpc/include/asm/thread_info.h +++ b/arch/powerpc/include/asm/thread_info.h @@ -46,15 +46,13 @@ struct thread_info { /* * macros/functions for gaining access to the thread information structure - * - * preempt_count needs to be 1 initially, until the scheduler is functional. */ #define INIT_THREAD_INFO(tsk) \ { \ .task = &tsk, \ .exec_domain = &default_exec_domain, \ .cpu = 0, \ - .preempt_count = 1, \ + .preempt_count = INIT_PREEMPT_COUNT, \ .restart_block = { \ .fn = do_no_restart_syscall, \ }, \ diff --git a/arch/s390/include/asm/thread_info.h b/arch/s390/include/asm/thread_info.h index 925bcc6..ba1cab9 100644 --- a/arch/s390/include/asm/thread_info.h +++ b/arch/s390/include/asm/thread_info.h @@ -61,7 +61,7 @@ struct thread_info { .exec_domain = &default_exec_domain, \ .flags = 0, \ .cpu = 0, \ - .preempt_count = 1, \ + .preempt_count = INIT_PREEMPT_COUNT, \ .restart_block = { \ .fn = do_no_restart_syscall, \ }, \ diff --git a/arch/sh/include/asm/thread_info.h b/arch/sh/include/asm/thread_info.h index f09ac48..d570ac2 100644 --- a/arch/sh/include/asm/thread_info.h +++ b/arch/sh/include/asm/thread_info.h @@ -51,7 +51,7 @@ struct thread_info { .exec_domain = &default_exec_domain, \ .flags = 0, \ .cpu = 0, \ - .preempt_count = 1, \ + .preempt_count = INIT_PREEMPT_COUNT, \ .addr_limit = KERNEL_DS, \ .restart_block = { \ .fn = do_no_restart_syscall, \ diff --git a/arch/sparc/include/asm/thread_info_32.h b/arch/sparc/include/asm/thread_info_32.h index 0f7b0e5..844d73a 100644 --- a/arch/sparc/include/asm/thread_info_32.h +++ b/arch/sparc/include/asm/thread_info_32.h @@ -54,8 +54,6 @@ struct thread_info { /* * macros/functions for gaining access to the thread information structure - * - * preempt_count needs to be 1 initially, until the scheduler is functional. */ #define INIT_THREAD_INFO(tsk) \ { \ @@ -64,7 +62,7 @@ struct thread_info { .exec_domain = &default_exec_domain, \ .flags = 0, \ .cpu = 0, \ - .preempt_count = 1, \ + .preempt_count = INIT_PREEMPT_COUNT, \ .restart_block = { \ .fn = do_no_restart_syscall, \ }, \ diff --git a/arch/sparc/include/asm/thread_info_64.h b/arch/sparc/include/asm/thread_info_64.h index 6586572..1b45a7b 100644 --- a/arch/sparc/include/asm/thread_info_64.h +++ b/arch/sparc/include/asm/thread_info_64.h @@ -125,8 +125,6 @@ struct thread_info { /* * macros/functions for gaining access to the thread information structure - * - * preempt_count needs to be 1 initially, until the scheduler is functional. */ #ifndef __ASSEMBLY__ @@ -135,7 +133,7 @@ struct thread_info { .task = &tsk, \ .flags = ((unsigned long)ASI_P) << TI_FLAG_CURRENT_DS_SHIFT, \ .exec_domain = &default_exec_domain, \ - .preempt_count = 1, \ + .preempt_count = INIT_PREEMPT_COUNT, \ .restart_block = { \ .fn = do_no_restart_syscall, \ }, \ diff --git a/arch/um/include/asm/thread_info.h b/arch/um/include/asm/thread_info.h index 62274ab..fd911f8 100644 --- a/arch/um/include/asm/thread_info.h +++ b/arch/um/include/asm/thread_info.h @@ -32,7 +32,7 @@ struct thread_info { .exec_domain = &default_exec_domain, \ .flags = 0, \ .cpu = 0, \ - .preempt_count = 1, \ + .preempt_count = INIT_PREEMPT_COUNT, \ .addr_limit = KERNEL_DS, \ .restart_block = { \ .fn = do_no_restart_syscall, \ diff --git a/arch/x86/include/asm/thread_info.h b/arch/x86/include/asm/thread_info.h index b078352..fad7d40 100644 --- a/arch/x86/include/asm/thread_info.h +++ b/arch/x86/include/asm/thread_info.h @@ -49,7 +49,7 @@ struct thread_info { .exec_domain = &default_exec_domain, \ .flags = 0, \ .cpu = 0, \ - .preempt_count = 1, \ + .preempt_count = INIT_PREEMPT_COUNT, \ .addr_limit = KERNEL_DS, \ .restart_block = { \ .fn = do_no_restart_syscall, \ diff --git a/arch/xtensa/include/asm/thread_info.h b/arch/xtensa/include/asm/thread_info.h index 0f4fe1f..1316564 100644 --- a/arch/xtensa/include/asm/thread_info.h +++ b/arch/xtensa/include/asm/thread_info.h @@ -80,8 +80,6 @@ struct thread_info { /* * macros/functions for gaining access to the thread information structure - * - * preempt_count needs to be 1 initially, until the scheduler is functional. */ #ifndef __ASSEMBLY__ @@ -92,7 +90,7 @@ struct thread_info { .exec_domain = &default_exec_domain, \ .flags = 0, \ .cpu = 0, \ - .preempt_count = 1, \ + .preempt_count = INIT_PREEMPT_COUNT, \ .addr_limit = KERNEL_DS, \ .restart_block = { \ .fn = do_no_restart_syscall, \ -- cgit v1.1 From a1a08d1cb0ab148fd74216e4c0b4d4db18fe62c6 Mon Sep 17 00:00:00 2001 From: Roland Dreier <roland@digitalvampire.org> Date: Sat, 11 Jul 2009 00:10:04 -0700 Subject: x86: Remove spurious printk level from segfault message Since commit 5fd29d6c ("printk: clean up handling of log-levels and newlines"), the kernel logs segfaults like: <6>gnome-power-man[24509]: segfault at 20 ip 00007f9d4950465a sp 00007fffbb50fc70 error 4 in libgobject-2.0.so.0.2103.0[7f9d494f7000+45000] with the extra "<6>" being KERN_INFO. This happens because the printk in show_signal_msg() started with KERN_CONT and then used "%s" to pass in the real level; and KERN_CONT is no longer an empty string, and printk only pays attention to the level at the very beginning of the format string. Therefore, remove the KERN_CONT from this printk, since it is now actively causing problems (and never really made any sense). Signed-off-by: Roland Dreier <roland@digitalvampire.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <874otjitkj.fsf@shaolin.home.digitalvampire.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/mm/fault.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c index 85307cc..bfae139 100644 --- a/arch/x86/mm/fault.c +++ b/arch/x86/mm/fault.c @@ -697,7 +697,7 @@ show_signal_msg(struct pt_regs *regs, unsigned long error_code, if (!printk_ratelimit()) return; - printk(KERN_CONT "%s%s[%d]: segfault at %lx ip %p sp %p error %lx", + printk("%s%s[%d]: segfault at %lx ip %p sp %p error %lx", task_pid_nr(tsk) > 1 ? KERN_INFO : KERN_EMERG, tsk->comm, task_pid_nr(tsk), address, (void *)regs->ip, (void *)regs->sp, error_code); -- cgit v1.1 From 405f55712dfe464b3240d7816cc4fe4174831be2 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan <adobriyan@gmail.com> Date: Sat, 11 Jul 2009 22:08:37 +0400 Subject: headers: smp_lock.h redux * Remove smp_lock.h from files which don't need it (including some headers!) * Add smp_lock.h to files which do need it * Make smp_lock.h include conditional in hardirq.h It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT This will make hardirq.h inclusion cheaper for every PREEMPT=n config (which includes allmodconfig/allyesconfig, BTW) Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> --- arch/alpha/kernel/ptrace.c | 1 - arch/blackfin/kernel/ptrace.c | 1 - arch/blackfin/kernel/sys_bfin.c | 1 - arch/cris/kernel/sys_cris.c | 1 - arch/ia64/kernel/ptrace.c | 1 - arch/m32r/kernel/ptrace.c | 1 - arch/microblaze/kernel/ptrace.c | 1 - arch/microblaze/kernel/signal.c | 1 - arch/microblaze/kernel/sys_microblaze.c | 1 - arch/mips/kernel/ptrace32.c | 1 - arch/mips/mm/hugetlbpage.c | 1 - arch/mn10300/kernel/ptrace.c | 1 - arch/mn10300/kernel/signal.c | 1 - arch/mn10300/kernel/sys_mn10300.c | 1 - arch/mn10300/kernel/traps.c | 1 - arch/mn10300/mm/fault.c | 1 - arch/mn10300/mm/misalignment.c | 1 - arch/powerpc/kernel/ptrace32.c | 1 - arch/s390/kernel/dis.c | 1 - arch/s390/kernel/ptrace.c | 1 - arch/s390/mm/fault.c | 1 - arch/sh/mm/tlb-sh3.c | 1 - arch/sparc/kernel/ptrace_32.c | 1 - arch/sparc/kernel/ptrace_64.c | 1 - arch/sparc/kernel/time_64.c | 1 - arch/sparc/kernel/traps_32.c | 1 - 26 files changed, 26 deletions(-) (limited to 'arch') diff --git a/arch/alpha/kernel/ptrace.c b/arch/alpha/kernel/ptrace.c index 1e9ad52..e072041d 100644 --- a/arch/alpha/kernel/ptrace.c +++ b/arch/alpha/kernel/ptrace.c @@ -8,7 +8,6 @@ #include <linux/sched.h> #include <linux/mm.h> #include <linux/smp.h> -#include <linux/smp_lock.h> #include <linux/errno.h> #include <linux/ptrace.h> #include <linux/user.h> diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c index d76618d..6a387ee 100644 --- a/arch/blackfin/kernel/ptrace.c +++ b/arch/blackfin/kernel/ptrace.c @@ -31,7 +31,6 @@ #include <linux/sched.h> #include <linux/mm.h> #include <linux/smp.h> -#include <linux/smp_lock.h> #include <linux/errno.h> #include <linux/ptrace.h> #include <linux/user.h> diff --git a/arch/blackfin/kernel/sys_bfin.c b/arch/blackfin/kernel/sys_bfin.c index a8f1329..3da60fb 100644 --- a/arch/blackfin/kernel/sys_bfin.c +++ b/arch/blackfin/kernel/sys_bfin.c @@ -29,7 +29,6 @@ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -#include <linux/smp_lock.h> #include <linux/spinlock.h> #include <linux/sem.h> #include <linux/msg.h> diff --git a/arch/cris/kernel/sys_cris.c b/arch/cris/kernel/sys_cris.c index a79fbd8..2ad962c 100644 --- a/arch/cris/kernel/sys_cris.c +++ b/arch/cris/kernel/sys_cris.c @@ -15,7 +15,6 @@ #include <linux/mm.h> #include <linux/fs.h> #include <linux/smp.h> -#include <linux/smp_lock.h> #include <linux/sem.h> #include <linux/msg.h> #include <linux/shm.h> diff --git a/arch/ia64/kernel/ptrace.c b/arch/ia64/kernel/ptrace.c index 92c9689..9daa87f 100644 --- a/arch/ia64/kernel/ptrace.c +++ b/arch/ia64/kernel/ptrace.c @@ -15,7 +15,6 @@ #include <linux/mm.h> #include <linux/errno.h> #include <linux/ptrace.h> -#include <linux/smp_lock.h> #include <linux/user.h> #include <linux/security.h> #include <linux/audit.h> diff --git a/arch/m32r/kernel/ptrace.c b/arch/m32r/kernel/ptrace.c index bf0abe9..98b8feb 100644 --- a/arch/m32r/kernel/ptrace.c +++ b/arch/m32r/kernel/ptrace.c @@ -19,7 +19,6 @@ #include <linux/mm.h> #include <linux/err.h> #include <linux/smp.h> -#include <linux/smp_lock.h> #include <linux/errno.h> #include <linux/ptrace.h> #include <linux/user.h> diff --git a/arch/microblaze/kernel/ptrace.c b/arch/microblaze/kernel/ptrace.c index b86aa62..53ff39a 100644 --- a/arch/microblaze/kernel/ptrace.c +++ b/arch/microblaze/kernel/ptrace.c @@ -27,7 +27,6 @@ #include <linux/kernel.h> #include <linux/mm.h> #include <linux/sched.h> -#include <linux/smp_lock.h> #include <linux/ptrace.h> #include <linux/signal.h> diff --git a/arch/microblaze/kernel/signal.c b/arch/microblaze/kernel/signal.c index 493819c..1c80e4f 100644 --- a/arch/microblaze/kernel/signal.c +++ b/arch/microblaze/kernel/signal.c @@ -21,7 +21,6 @@ #include <linux/sched.h> #include <linux/mm.h> #include <linux/smp.h> -#include <linux/smp_lock.h> #include <linux/kernel.h> #include <linux/signal.h> #include <linux/errno.h> diff --git a/arch/microblaze/kernel/sys_microblaze.c b/arch/microblaze/kernel/sys_microblaze.c index 8c9ebac..e000bce 100644 --- a/arch/microblaze/kernel/sys_microblaze.c +++ b/arch/microblaze/kernel/sys_microblaze.c @@ -15,7 +15,6 @@ #include <linux/errno.h> #include <linux/mm.h> #include <linux/smp.h> -#include <linux/smp_lock.h> #include <linux/syscalls.h> #include <linux/sem.h> #include <linux/msg.h> diff --git a/arch/mips/kernel/ptrace32.c b/arch/mips/kernel/ptrace32.c index c4f9ac1..32644b4 100644 --- a/arch/mips/kernel/ptrace32.c +++ b/arch/mips/kernel/ptrace32.c @@ -22,7 +22,6 @@ #include <linux/errno.h> #include <linux/ptrace.h> #include <linux/smp.h> -#include <linux/smp_lock.h> #include <linux/user.h> #include <linux/security.h> diff --git a/arch/mips/mm/hugetlbpage.c b/arch/mips/mm/hugetlbpage.c index 471c09a..8c2834f 100644 --- a/arch/mips/mm/hugetlbpage.c +++ b/arch/mips/mm/hugetlbpage.c @@ -16,7 +16,6 @@ #include <linux/mm.h> #include <linux/hugetlb.h> #include <linux/pagemap.h> -#include <linux/smp_lock.h> #include <linux/slab.h> #include <linux/err.h> #include <linux/sysctl.h> diff --git a/arch/mn10300/kernel/ptrace.c b/arch/mn10300/kernel/ptrace.c index e143339..cf847da 100644 --- a/arch/mn10300/kernel/ptrace.c +++ b/arch/mn10300/kernel/ptrace.c @@ -13,7 +13,6 @@ #include <linux/sched.h> #include <linux/mm.h> #include <linux/smp.h> -#include <linux/smp_lock.h> #include <linux/errno.h> #include <linux/ptrace.h> #include <linux/user.h> diff --git a/arch/mn10300/kernel/signal.c b/arch/mn10300/kernel/signal.c index 9f7572a..feb2f2e 100644 --- a/arch/mn10300/kernel/signal.c +++ b/arch/mn10300/kernel/signal.c @@ -12,7 +12,6 @@ #include <linux/sched.h> #include <linux/mm.h> #include <linux/smp.h> -#include <linux/smp_lock.h> #include <linux/kernel.h> #include <linux/signal.h> #include <linux/errno.h> diff --git a/arch/mn10300/kernel/sys_mn10300.c b/arch/mn10300/kernel/sys_mn10300.c index bca5a84..29d196b 100644 --- a/arch/mn10300/kernel/sys_mn10300.c +++ b/arch/mn10300/kernel/sys_mn10300.c @@ -13,7 +13,6 @@ #include <linux/syscalls.h> #include <linux/mm.h> #include <linux/smp.h> -#include <linux/smp_lock.h> #include <linux/sem.h> #include <linux/msg.h> #include <linux/shm.h> diff --git a/arch/mn10300/kernel/traps.c b/arch/mn10300/kernel/traps.c index 0dfdc50..91365ad 100644 --- a/arch/mn10300/kernel/traps.c +++ b/arch/mn10300/kernel/traps.c @@ -17,7 +17,6 @@ #include <linux/timer.h> #include <linux/mm.h> #include <linux/smp.h> -#include <linux/smp_lock.h> #include <linux/init.h> #include <linux/delay.h> #include <linux/spinlock.h> diff --git a/arch/mn10300/mm/fault.c b/arch/mn10300/mm/fault.c index a62e1e1..53bb17d 100644 --- a/arch/mn10300/mm/fault.c +++ b/arch/mn10300/mm/fault.c @@ -20,7 +20,6 @@ #include <linux/mman.h> #include <linux/mm.h> #include <linux/smp.h> -#include <linux/smp_lock.h> #include <linux/interrupt.h> #include <linux/init.h> #include <linux/vt_kern.h> /* For unblank_screen() */ diff --git a/arch/mn10300/mm/misalignment.c b/arch/mn10300/mm/misalignment.c index 94c4a43..3001625 100644 --- a/arch/mn10300/mm/misalignment.c +++ b/arch/mn10300/mm/misalignment.c @@ -17,7 +17,6 @@ #include <linux/timer.h> #include <linux/mm.h> #include <linux/smp.h> -#include <linux/smp_lock.h> #include <linux/init.h> #include <linux/delay.h> #include <linux/spinlock.h> diff --git a/arch/powerpc/kernel/ptrace32.c b/arch/powerpc/kernel/ptrace32.c index 297632c..8a6daf4 100644 --- a/arch/powerpc/kernel/ptrace32.c +++ b/arch/powerpc/kernel/ptrace32.c @@ -21,7 +21,6 @@ #include <linux/sched.h> #include <linux/mm.h> #include <linux/smp.h> -#include <linux/smp_lock.h> #include <linux/errno.h> #include <linux/ptrace.h> #include <linux/regset.h> diff --git a/arch/s390/kernel/dis.c b/arch/s390/kernel/dis.c index d2f270c..db943a7 100644 --- a/arch/s390/kernel/dis.c +++ b/arch/s390/kernel/dis.c @@ -15,7 +15,6 @@ #include <linux/timer.h> #include <linux/mm.h> #include <linux/smp.h> -#include <linux/smp_lock.h> #include <linux/init.h> #include <linux/interrupt.h> #include <linux/delay.h> diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c index 490b399..43acd73 100644 --- a/arch/s390/kernel/ptrace.c +++ b/arch/s390/kernel/ptrace.c @@ -26,7 +26,6 @@ #include <linux/sched.h> #include <linux/mm.h> #include <linux/smp.h> -#include <linux/smp_lock.h> #include <linux/errno.h> #include <linux/ptrace.h> #include <linux/user.h> diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c index 74eb26b..e5e119f 100644 --- a/arch/s390/mm/fault.c +++ b/arch/s390/mm/fault.c @@ -22,7 +22,6 @@ #include <linux/compat.h> #include <linux/smp.h> #include <linux/kdebug.h> -#include <linux/smp_lock.h> #include <linux/init.h> #include <linux/console.h> #include <linux/module.h> diff --git a/arch/sh/mm/tlb-sh3.c b/arch/sh/mm/tlb-sh3.c index 7fbfd5a..17cb7c3 100644 --- a/arch/sh/mm/tlb-sh3.c +++ b/arch/sh/mm/tlb-sh3.c @@ -18,7 +18,6 @@ #include <linux/mman.h> #include <linux/mm.h> #include <linux/smp.h> -#include <linux/smp_lock.h> #include <linux/interrupt.h> #include <asm/system.h> diff --git a/arch/sparc/kernel/ptrace_32.c b/arch/sparc/kernel/ptrace_32.c index 8ce6285..7e3dfd9 100644 --- a/arch/sparc/kernel/ptrace_32.c +++ b/arch/sparc/kernel/ptrace_32.c @@ -16,7 +16,6 @@ #include <linux/ptrace.h> #include <linux/user.h> #include <linux/smp.h> -#include <linux/smp_lock.h> #include <linux/security.h> #include <linux/signal.h> #include <linux/regset.h> diff --git a/arch/sparc/kernel/ptrace_64.c b/arch/sparc/kernel/ptrace_64.c index a941c61..4ae91dc 100644 --- a/arch/sparc/kernel/ptrace_64.c +++ b/arch/sparc/kernel/ptrace_64.c @@ -17,7 +17,6 @@ #include <linux/ptrace.h> #include <linux/user.h> #include <linux/smp.h> -#include <linux/smp_lock.h> #include <linux/security.h> #include <linux/seccomp.h> #include <linux/audit.h> diff --git a/arch/sparc/kernel/time_64.c b/arch/sparc/kernel/time_64.c index 5c12e79..da1218e 100644 --- a/arch/sparc/kernel/time_64.c +++ b/arch/sparc/kernel/time_64.c @@ -11,7 +11,6 @@ #include <linux/errno.h> #include <linux/module.h> #include <linux/sched.h> -#include <linux/smp_lock.h> #include <linux/kernel.h> #include <linux/param.h> #include <linux/string.h> diff --git a/arch/sparc/kernel/traps_32.c b/arch/sparc/kernel/traps_32.c index 3582833..c0490c7 100644 --- a/arch/sparc/kernel/traps_32.c +++ b/arch/sparc/kernel/traps_32.c @@ -13,7 +13,6 @@ #include <linux/kernel.h> #include <linux/signal.h> #include <linux/smp.h> -#include <linux/smp_lock.h> #include <linux/kdebug.h> #include <asm/delay.h> -- cgit v1.1 From 08f42877aff6b966a386c47e0aeb98e7645db2a9 Mon Sep 17 00:00:00 2001 From: Kay Sievers <kay.sievers@vrfy.org> Date: Thu, 2 Jul 2009 23:27:22 +0200 Subject: sparc: remove driver-core BUS_ID_SIZE The name size limit is gone from the driver-core, the BUS_ID_SIZE value will be removed. Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> --- arch/sparc/kernel/vio.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sparc/kernel/vio.c b/arch/sparc/kernel/vio.c index 753d128..c28c714 100644 --- a/arch/sparc/kernel/vio.c +++ b/arch/sparc/kernel/vio.c @@ -224,7 +224,12 @@ static struct vio_dev *vio_create_one(struct mdesc_handle *hp, u64 mp, if (!strcmp(type, "domain-services-port")) bus_id_name = "ds"; - if (strlen(bus_id_name) >= BUS_ID_SIZE - 4) { + /* + * 20 char is the old driver-core name size limit, which is no more. + * This check can probably be removed after review and possible + * adaption of the vio users name length handling. + */ + if (strlen(bus_id_name) >= 20 - 4) { printk(KERN_ERR "VIO: bus_id_name [%s] is too long.\n", bus_id_name); return NULL; -- cgit v1.1 From f1c6a58121f9846ac665b0fbd3cbab90ce8bcbac Mon Sep 17 00:00:00 2001 From: Daniel Qarras <dqarras@yahoo.com> Date: Sun, 12 Jul 2009 04:32:40 -0700 Subject: perf_counter, x86: Extend perf_counter Pentium M support I've attached a patch to remove the Pentium M special casing of EMON and as noticed at least with my Pentium M the hardware PMU now works: Performance counter stats for '/bin/ls /var/tmp': 1.809988 task-clock-msecs # 0.125 CPUs 1 context-switches # 0.001 M/sec 0 CPU-migrations # 0.000 M/sec 224 page-faults # 0.124 M/sec 1425648 cycles # 787.656 M/sec 912755 instructions # 0.640 IPC Vince suggested that this code was trying to address erratum Y17 in Pentium-M's: http://download.intel.com/support/processors/mobile/pm/sb/25266532.pdf But that erratum (related to IA32_MISC_ENABLES.7) does not affect perfcounters as we dont use this toggle to disable RDPMC and WRMSR/RDMSR access to performance counters. We keep cr4's bit 8 (X86_CR4_PCE) clear so unprivileged RDPMC access is not allowed anyway. Cc: Vince Weaver <vince@deater.net> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@googlemail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/kernel/cpu/perf_counter.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c index bed1c4c..7e346d4 100644 --- a/arch/x86/kernel/cpu/perf_counter.c +++ b/arch/x86/kernel/cpu/perf_counter.c @@ -1583,10 +1583,8 @@ static int p6_pmu_init(void) break; case 9: case 13: - /* for Pentium M, we need to check if PMU exist */ - rdmsr(MSR_IA32_MISC_ENABLE, low, high); - if (low & MSR_IA32_MISC_ENABLE_EMON) - break; + /* Pentium M */ + break; default: pr_cont("unsupported p6 CPU model %d ", boot_cpu_data.x86_model); -- cgit v1.1 From 151586d0f70405d99324d89aea13706cf6d7f993 Mon Sep 17 00:00:00 2001 From: Rakib Mullick <rakib.mullick@gmail.com> Date: Sun, 12 Jul 2009 17:04:12 +0600 Subject: x86: Fix false positive section mismatch in es7000_32.c The variable apic_es7000_cluster references the function __cpuinit wakeup_secondary_cpu_via_mip() from a noninit section. So we've been warned by the following warning. To avoid possible collision between init/noninit, its best to mark the variable as __refdata. We were warned by the following warning: LD arch/x86/kernel/apic/built-in.o WARNING: arch/x86/kernel/apic/built-in.o(.data+0x198c): Section mismatch in reference from the variable apic_es7000_cluster to the function .cpuinit.text:wakeup_secondary_cpu_via_mip() Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com> LKML-Reference: <b9df5fa10907120404k6279a10ch5e9682432272706f@mail.gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/kernel/apic/es7000_32.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/es7000_32.c b/arch/x86/kernel/apic/es7000_32.c index 69328ac..8952a58 100644 --- a/arch/x86/kernel/apic/es7000_32.c +++ b/arch/x86/kernel/apic/es7000_32.c @@ -652,7 +652,8 @@ static int es7000_mps_oem_check_cluster(struct mpc_table *mpc, char *oem, return ret && es7000_apic_is_cluster(); } -struct apic apic_es7000_cluster = { +/* We've been warned by a false positive warning.Use __refdata to keep calm. */ +struct apic __refdata apic_es7000_cluster = { .name = "es7000", .probe = probe_es7000, -- cgit v1.1 From 7473727be884293c8171775a148e1d174d1606e6 Mon Sep 17 00:00:00 2001 From: Rakib Mullick <rakib.mullick@gmail.com> Date: Sun, 12 Jul 2009 17:07:19 +0600 Subject: x86, apic: Fix false positive section mismatch in numaq_32.c The variable apic_numaq placed in noninit section references the function wakeup_secondary_cpu_via_nmi(), which is in __cpuinit section. Thus causes a section mismatch warning. To avoid such mismatch we mark apic_numaq as __refdata. We were warned by the following warning: WARNING: arch/x86/kernel/built-in.o(.data+0x932c): Section mismatch in reference from the variable apic_numaq to the function .cpuinit.text:wakeup_secondary_cpu_via_nmi() Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com> LKML-Reference: <b9df5fa10907120407p6b4f67dtf4d563155488188a@mail.gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/kernel/apic/numaq_32.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/numaq_32.c b/arch/x86/kernel/apic/numaq_32.c index 533e59c..ca96e68 100644 --- a/arch/x86/kernel/apic/numaq_32.c +++ b/arch/x86/kernel/apic/numaq_32.c @@ -493,7 +493,8 @@ static void numaq_setup_portio_remap(void) (u_long) xquad_portio, (u_long) num_quads*XQUAD_PORTIO_QUAD); } -struct apic apic_numaq = { +/* Use __refdata to keep false positive warning calm. */ +struct apic __refdata apic_numaq = { .name = "NUMAQ", .probe = probe_numaq, -- cgit v1.1 From 5fddcdb70fd9e8fd52d42ed52a572fecb8eb7cde Mon Sep 17 00:00:00 2001 From: Huang Weiyi <weiyi.huang@gmail.com> Date: Mon, 13 Jul 2009 15:09:25 +0100 Subject: mn10300: remove duplicated #include Remove duplicated #include('s) in arch/mn10300/kernel/sys_mn10300.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> --- arch/mn10300/kernel/sys_mn10300.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/mn10300/kernel/sys_mn10300.c b/arch/mn10300/kernel/sys_mn10300.c index 29d196b..3e52a10 100644 --- a/arch/mn10300/kernel/sys_mn10300.c +++ b/arch/mn10300/kernel/sys_mn10300.c @@ -20,7 +20,6 @@ #include <linux/mman.h> #include <linux/file.h> #include <linux/utsname.h> -#include <linux/syscalls.h> #include <linux/tty.h> #include <asm/uaccess.h> -- cgit v1.1 From 2ad76643ff58bb8841f391ea8327c14abe273ea3 Mon Sep 17 00:00:00 2001 From: Dave Jones <davej@redhat.com> Date: Mon, 13 Jul 2009 16:14:37 -0400 Subject: x86: Fix warning in pvclock.c when building 32-bit, I see this .. arch/x86/kernel/pvclock.c:63:7: warning: "__x86_64__" is not defined Signed-off-by: Dave Jones <davej@redhat.com> LKML-Reference: <20090713201437.GA12165@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> --- arch/x86/kernel/pvclock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/pvclock.c b/arch/x86/kernel/pvclock.c index 4f9c55f..03801f2 100644 --- a/arch/x86/kernel/pvclock.c +++ b/arch/x86/kernel/pvclock.c @@ -60,7 +60,7 @@ static inline u64 scale_delta(u64 delta, u32 mul_frac, int shift) "adc %5,%%edx ; " : "=A" (product), "=r" (tmp1), "=r" (tmp2) : "a" ((u32)delta), "1" ((u32)(delta >> 32)), "2" (mul_frac) ); -#elif __x86_64__ +#elif defined(__x86_64__) __asm__ ( "mul %%rdx ; shrd $32,%%rdx,%%rax" : "=a" (product) : "0" (delta), "d" ((u64)mul_frac) ); -- cgit v1.1 From 28477fb1ed1a00c67b382ae8f37f35708e3bf5dd Mon Sep 17 00:00:00 2001 From: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Date: Wed, 8 Jul 2009 13:46:18 +0000 Subject: powerpc: Fix booke user_disable_single_step() On booke processors, gdb is seeing spurious SIGTRAPs when setting a watchpoint. user_disable_single_step() simply quits when the DAC is non-zero. It should be clearing the DBCR0_IC and DBCR0_BT bits from the dbcr0 register and TIF_SINGLESTEP from the thread flag. Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> --- arch/powerpc/kernel/ptrace.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c index 9fa2c7d..ef14988 100644 --- a/arch/powerpc/kernel/ptrace.c +++ b/arch/powerpc/kernel/ptrace.c @@ -736,15 +736,16 @@ void user_disable_single_step(struct task_struct *task) { struct pt_regs *regs = task->thread.regs; - -#if defined(CONFIG_BOOKE) - /* If DAC then do not single step, skip */ - if (task->thread.dabr) - return; -#endif - if (regs != NULL) { -#if defined(CONFIG_40x) || defined(CONFIG_BOOKE) +#if defined(CONFIG_BOOKE) + /* If DAC don't clear DBCRO_IDM or MSR_DE */ + if (task->thread.dabr) + task->thread.dbcr0 &= ~(DBCR0_IC | DBCR0_BT); + else { + task->thread.dbcr0 &= ~(DBCR0_IC | DBCR0_BT | DBCR0_IDM); + regs->msr &= ~MSR_DE; + } +#elif defined(CONFIG_40x) task->thread.dbcr0 &= ~(DBCR0_IC | DBCR0_BT | DBCR0_IDM); regs->msr &= ~MSR_DE; #else -- cgit v1.1 From 0115cb544b0a6709e9cf3de615e150d22e7d9d10 Mon Sep 17 00:00:00 2001 From: Andreas Schwab <schwab@linux-m68k.org> Date: Fri, 10 Jul 2009 11:17:36 +0000 Subject: powerpc: Fix another bug in move of altivec code to vector.S When moving load_up_altivec to vector.S a typo in a comment caused a thinko setting the wrong variable. Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> --- arch/powerpc/kernel/vector.S | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/vector.S b/arch/powerpc/kernel/vector.S index ef36cbbc..ea4d646 100644 --- a/arch/powerpc/kernel/vector.S +++ b/arch/powerpc/kernel/vector.S @@ -80,10 +80,10 @@ _GLOBAL(load_up_altivec) mtvscr vr0 REST_32VRS(0,r4,r5) #ifndef CONFIG_SMP - /* Update last_task_used_math to 'current' */ + /* Update last_task_used_altivec to 'current' */ subi r4,r5,THREAD /* Back to 'current' */ fromreal(r4) - PPC_STL r4,ADDROFF(last_task_used_math)(r3) + PPC_STL r4,ADDROFF(last_task_used_altivec)(r3) #endif /* CONFIG_SMP */ /* restore registers and return */ blr @@ -172,7 +172,7 @@ _GLOBAL(load_up_vsx) oris r12,r12,MSR_VSX@h std r12,_MSR(r1) #ifndef CONFIG_SMP - /* Update last_task_used_math to 'current' */ + /* Update last_task_used_vsx to 'current' */ ld r4,PACACURRENT(r13) std r4,0(r3) #endif /* CONFIG_SMP */ -- cgit v1.1 From 1997660cea28202ece0956cd44f332ac57700138 Mon Sep 17 00:00:00 2001 From: Robin Getz <robin.getz@analog.com> Date: Wed, 17 Jun 2009 15:18:18 +0000 Subject: Blackfin: cleanup code a bit with comments and defines Improve the assembly with a few explanatory comments and use symbolic defines rather than numeric values for bit positions. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- arch/blackfin/mach-common/entry.S | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index 5a4e7c7..fb1795d 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -218,7 +218,7 @@ ENTRY(_ex_single_step) /* Single stepping only a single instruction, so clear the trace * bit here. */ r7 = syscfg; - bitclr (r7, 0); + bitclr (r7, SYSCFG_SSSTEP_P); syscfg = R7; jump _ex_trap_c; @@ -251,7 +251,7 @@ ENTRY(_ex_single_step) if !cc jump _bfin_return_from_exception; r7 = syscfg; - bitclr (r7, 0); + bitclr (r7, SYSCFG_SSSTEP_P); /* Turn off single step */ syscfg = R7; /* Fall through to _bfin_return_from_exception. */ @@ -342,9 +342,11 @@ ENTRY(_ex_trap_c) r6 = retx; [p5 + PDA_RETX] = r6; #endif + /* Save the state of single stepping */ r6 = SYSCFG; [p5 + PDA_SYSCFG] = r6; - BITCLR(r6, 0); + /* Clear it while we handle the exception in IRQ5 mode */ + BITCLR(r6, SYSCFG_SSSTEP_P); SYSCFG = r6; /* Disable all interrupts, but make sure level 5 is enabled so @@ -367,7 +369,7 @@ ENDPROC(_ex_trap_c) * exception. This is a unrecoverable event, so crash. * Note: this cannot be ENTRY() as we jump here with "if cc jump" ... */ -_double_fault: +ENTRY(_double_fault) /* Turn caches & protection off, to ensure we don't get any more * double exceptions */ @@ -872,7 +874,7 @@ ENTRY(_ret_from_exception) raise 15; /* raise evt15 to do signal or reschedule */ 4: r0 = syscfg; - bitclr(r0, 0); + bitclr(r0, SYSCFG_SSSTEP_P); /* Turn off single step */ syscfg = r0; 5: rts; -- cgit v1.1 From b2dc0a08845af9d6ea990a1a28d4545998707570 Mon Sep 17 00:00:00 2001 From: Mike Frysinger <vapier@gentoo.org> Date: Sat, 20 Jun 2009 15:36:09 -0400 Subject: Blackfin: drop dead flash_probe call There are no CONFIG_{BLK,CHR}_DEV_FLASH Kconfig options, and there is no flash_probe() function, so not really sure what this code is all about. Seems to be dead code that stretches way back to the start of the Blackfin port. Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- arch/blackfin/kernel/setup.c | 7 ------- 1 file changed, 7 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index 6136c33..6e150d9 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -868,13 +868,6 @@ void __init setup_arch(char **cmdline_p) else printk(KERN_CONT "and Disabled\n"); -#if defined(CONFIG_CHR_DEV_FLASH) || defined(CONFIG_BLK_DEV_FLASH) - /* we need to initialize the Flashrom device here since we might - * do things with flash early on in the boot - */ - flash_probe(); -#endif - printk(KERN_INFO "Boot Mode: %i\n", bfin_read_SYSCR() & 0xF); /* Newer parts mirror SWRST bits in SYSCR */ -- cgit v1.1 From 976119bc5d2253bb47f3255ee178ce1ee605fd3c Mon Sep 17 00:00:00 2001 From: Graf Yang <graf.yang@analog.com> Date: Wed, 1 Jul 2009 07:05:40 +0000 Subject: Blackfin: update anomaly lists to match latest sheets/usage Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- arch/blackfin/mach-bf518/include/mach/anomaly.h | 2 ++ arch/blackfin/mach-bf527/include/mach/anomaly.h | 4 +++- arch/blackfin/mach-bf533/include/mach/anomaly.h | 1 + arch/blackfin/mach-bf537/include/mach/anomaly.h | 2 ++ arch/blackfin/mach-bf538/include/mach/anomaly.h | 2 ++ arch/blackfin/mach-bf548/include/mach/anomaly.h | 2 ++ arch/blackfin/mach-bf561/include/mach/anomaly.h | 1 + 7 files changed, 13 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/blackfin/mach-bf518/include/mach/anomaly.h b/arch/blackfin/mach-bf518/include/mach/anomaly.h index 426e064..753ed81 100644 --- a/arch/blackfin/mach-bf518/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf518/include/mach/anomaly.h @@ -82,6 +82,7 @@ #define ANOMALY_05000179 (0) #define ANOMALY_05000182 (0) #define ANOMALY_05000183 (0) +#define ANOMALY_05000189 (0) #define ANOMALY_05000198 (0) #define ANOMALY_05000202 (0) #define ANOMALY_05000215 (0) @@ -117,6 +118,7 @@ #define ANOMALY_05000357 (0) #define ANOMALY_05000362 (1) #define ANOMALY_05000363 (0) +#define ANOMALY_05000364 (0) #define ANOMALY_05000371 (0) #define ANOMALY_05000380 (0) #define ANOMALY_05000386 (0) diff --git a/arch/blackfin/mach-bf527/include/mach/anomaly.h b/arch/blackfin/mach-bf527/include/mach/anomaly.h index 0d63f74..c438ca8 100644 --- a/arch/blackfin/mach-bf527/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf527/include/mach/anomaly.h @@ -176,6 +176,8 @@ #define ANOMALY_05000443 (1) /* The WURESET Bit in the SYSCR Register is not Functional */ #define ANOMALY_05000445 (1) +/* USB DMA Short Packet Data Corruption */ +#define ANOMALY_05000450 (1) /* BCODE_QUICKBOOT, BCODE_ALLBOOT, and BCODE_FULLBOOT Settings in SYSCR Register Not Functional */ #define ANOMALY_05000451 (1) /* Incorrect Default Hysteresis Setting for RESET, NMI, and BMODE Signals */ @@ -201,6 +203,7 @@ #define ANOMALY_05000179 (0) #define ANOMALY_05000182 (0) #define ANOMALY_05000183 (0) +#define ANOMALY_05000189 (0) #define ANOMALY_05000198 (0) #define ANOMALY_05000202 (0) #define ANOMALY_05000215 (0) @@ -238,6 +241,5 @@ #define ANOMALY_05000412 (0) #define ANOMALY_05000447 (0) #define ANOMALY_05000448 (0) -#define ANOMALY_05000450 (0) #endif diff --git a/arch/blackfin/mach-bf533/include/mach/anomaly.h b/arch/blackfin/mach-bf533/include/mach/anomaly.h index 70a0ad6..cd83db2 100644 --- a/arch/blackfin/mach-bf533/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf533/include/mach/anomaly.h @@ -335,6 +335,7 @@ #define ANOMALY_05000323 (0) #define ANOMALY_05000353 (1) #define ANOMALY_05000362 (1) +#define ANOMALY_05000364 (0) #define ANOMALY_05000380 (0) #define ANOMALY_05000386 (1) #define ANOMALY_05000389 (0) diff --git a/arch/blackfin/mach-bf537/include/mach/anomaly.h b/arch/blackfin/mach-bf537/include/mach/anomaly.h index 57c128c..e66aa13 100644 --- a/arch/blackfin/mach-bf537/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf537/include/mach/anomaly.h @@ -167,6 +167,7 @@ #define ANOMALY_05000179 (0) #define ANOMALY_05000182 (0) #define ANOMALY_05000183 (0) +#define ANOMALY_05000189 (0) #define ANOMALY_05000198 (0) #define ANOMALY_05000202 (0) #define ANOMALY_05000215 (0) @@ -186,6 +187,7 @@ #define ANOMALY_05000353 (1) #define ANOMALY_05000362 (1) #define ANOMALY_05000363 (0) +#define ANOMALY_05000364 (0) #define ANOMALY_05000380 (0) #define ANOMALY_05000386 (1) #define ANOMALY_05000389 (0) diff --git a/arch/blackfin/mach-bf538/include/mach/anomaly.h b/arch/blackfin/mach-bf538/include/mach/anomaly.h index c97acdf..451cf8a 100644 --- a/arch/blackfin/mach-bf538/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf538/include/mach/anomaly.h @@ -137,6 +137,7 @@ #define ANOMALY_05000158 (0) #define ANOMALY_05000171 (0) #define ANOMALY_05000182 (0) +#define ANOMALY_05000189 (0) #define ANOMALY_05000198 (0) #define ANOMALY_05000202 (0) #define ANOMALY_05000215 (0) @@ -160,6 +161,7 @@ #define ANOMALY_05000353 (1) #define ANOMALY_05000362 (1) #define ANOMALY_05000363 (0) +#define ANOMALY_05000364 (0) #define ANOMALY_05000380 (0) #define ANOMALY_05000386 (1) #define ANOMALY_05000389 (0) diff --git a/arch/blackfin/mach-bf548/include/mach/anomaly.h b/arch/blackfin/mach-bf548/include/mach/anomaly.h index 18a4cd24..cd040fe 100644 --- a/arch/blackfin/mach-bf548/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf548/include/mach/anomaly.h @@ -195,6 +195,7 @@ #define ANOMALY_05000179 (0) #define ANOMALY_05000182 (0) #define ANOMALY_05000183 (0) +#define ANOMALY_05000189 (0) #define ANOMALY_05000198 (0) #define ANOMALY_05000202 (0) #define ANOMALY_05000215 (0) @@ -226,6 +227,7 @@ #define ANOMALY_05000323 (0) #define ANOMALY_05000362 (1) #define ANOMALY_05000363 (0) +#define ANOMALY_05000364 (0) #define ANOMALY_05000380 (0) #define ANOMALY_05000400 (0) #define ANOMALY_05000412 (0) diff --git a/arch/blackfin/mach-bf561/include/mach/anomaly.h b/arch/blackfin/mach-bf561/include/mach/anomaly.h index 94b8e27..a5312b2 100644 --- a/arch/blackfin/mach-bf561/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf561/include/mach/anomaly.h @@ -288,6 +288,7 @@ #define ANOMALY_05000273 (0) #define ANOMALY_05000311 (0) #define ANOMALY_05000353 (1) +#define ANOMALY_05000364 (0) #define ANOMALY_05000380 (0) #define ANOMALY_05000386 (1) #define ANOMALY_05000389 (0) -- cgit v1.1 From 0e4edcf0b0f7d96c4be7788b13bee82e4d3ba0ce Mon Sep 17 00:00:00 2001 From: Robin Getz <robin.getz@analog.com> Date: Mon, 22 Jun 2009 20:23:48 +0000 Subject: Blackfin: work around anomaly 05000281 Add missing anomaly workaround for anomaly 05000281 - we can't return to instructions which cause hardware errors otherwise we trigger the error again which means we go into an infinite loop of handling, returning, and retriggering. This work around confuses gdb when the error occurs as the PC will seemed to have moved, so a better long term fix will need to be figured out, but for now this is better than an infinite crash loop. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- arch/blackfin/kernel/traps.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index 8a1caf2..664de56 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -619,7 +619,8 @@ asmlinkage void trap_c(struct pt_regs *fp) force_sig_info(sig, &info, current); } - if (ANOMALY_05000461 && trapnr == VEC_HWERR && !access_ok(VERIFY_READ, fp->pc, 8)) + if ((ANOMALY_05000461 && trapnr == VEC_HWERR && !access_ok(VERIFY_READ, fp->pc, 8)) || + (ANOMALY_05000281 && trapnr == VEC_HWERR)) fp->pc = SAFE_USER_INSTRUCTION; traps_done: -- cgit v1.1 From 15627bd35c6f02d159e0cb41d287dcba3a23a135 Mon Sep 17 00:00:00 2001 From: Mike Frysinger <vapier@gentoo.org> Date: Tue, 23 Jun 2009 11:21:34 +0000 Subject: Blackfin: restore exception banner when dumping crash info Previous unification code put the exception banner behind the "is oops" logic when it should have been printed all the time. Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- arch/blackfin/kernel/traps.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index 664de56..9efac0f 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -570,11 +570,12 @@ asmlinkage void trap_c(struct pt_regs *fp) if (kernel_mode_regs(fp) || (current && !current->mm)) { console_verbose(); oops_in_progress = 1; - if (strerror) - verbose_printk(strerror); } if (sig != SIGTRAP) { + if (strerror) + verbose_printk(strerror); + dump_bfin_process(fp); dump_bfin_mem(fp); show_regs(fp); -- cgit v1.1 From dc437b1b596e310bb583de3868c3d61a6798c81c Mon Sep 17 00:00:00 2001 From: Robin Getz <robin.getz@analog.com> Date: Fri, 26 Jun 2009 12:23:51 +0000 Subject: Blackfin: fix silent crash when no uClinux MTD filesystem exists Since we need to relocate the attached filesystem with the uClinux MTD map (to handle some anomalies), we need to know its real filesize. If we boot a kernel without a filesystem actually attached, we end up blindly reading and copying garbage (since there is no magic value to detect validity). Often times this results in an early crash and no output. So add a few basic sanity checks before operating on things to catch the majority of cases. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- arch/blackfin/kernel/setup.c | 26 ++++++++++++++++---------- 1 file changed, 16 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index 6e150d9..e4d2da7 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -568,17 +568,23 @@ static __init void memory_setup(void) # endif /* ANOMALY_05000263 */ # endif /* CONFIG_ROMFS_FS */ - memory_end -= mtd_size; - - if (mtd_size == 0) { - console_init(); - panic("Don't boot kernel without rootfs attached."); + /* Since the default MTD_UCLINUX has no magic number, we just blindly + * read 8 past the end of the kernel's image, and look at it. + * When no image is attached, mtd_size is set to a random number + * Do some basic sanity checks before operating on things + */ + if (mtd_size == 0 || memory_end <= mtd_size) { + pr_emerg("Could not find valid ram mtd attached.\n"); + } else { + memory_end -= mtd_size; + + /* Relocate MTD image to the top of memory after the uncached memory area */ + uclinux_ram_map.phys = memory_mtd_start = memory_end; + uclinux_ram_map.size = mtd_size; + pr_info("Found mtd parition at 0x%p, (len=0x%lx), moving to 0x%p\n", + _end, mtd_size, (void *)memory_mtd_start); + dma_memcpy((void *)uclinux_ram_map.phys, _end, uclinux_ram_map.size); } - - /* Relocate MTD image to the top of memory after the uncached memory area */ - uclinux_ram_map.phys = memory_mtd_start = memory_end; - uclinux_ram_map.size = mtd_size; - dma_memcpy((void *)uclinux_ram_map.phys, _end, uclinux_ram_map.size); #endif /* CONFIG_MTD_UCLINUX */ #if (defined(CONFIG_BFIN_EXTMEM_ICACHEABLE) && ANOMALY_05000263) -- cgit v1.1 From 8399a74f61c69c7d233924de3dd314ca0effa16a Mon Sep 17 00:00:00 2001 From: Jie Zhang <jie.zhang@analog.com> Date: Sun, 28 Jun 2009 13:19:36 +0000 Subject: Blackfin: fix miscompilation in lshrdi3 The code used in the Blackfin lshrdi3 utilizes gcc constructs. However, the structures declared don't line up with the code gcc generates, so under certain optimizations, we get bad code and things crap out in fun random ways. So rather than trying to maintain different gcc definitions ourselves, just use the ones available in gcclib.h. URL: http://blackfin.uclinux.org/gf/tracker/5286 Signed-off-by: Jie Zhang <jie.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- arch/blackfin/lib/lshrdi3.c | 16 +--------------- 1 file changed, 1 insertion(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/lib/lshrdi3.c b/arch/blackfin/lib/lshrdi3.c index 84b9c55..e57bf6f 100644 --- a/arch/blackfin/lib/lshrdi3.c +++ b/arch/blackfin/lib/lshrdi3.c @@ -27,21 +27,7 @@ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -#define BITS_PER_UNIT 8 - -typedef int SItype __attribute__ ((mode(SI))); -typedef unsigned int USItype __attribute__ ((mode(SI))); -typedef int DItype __attribute__ ((mode(DI))); -typedef int word_type __attribute__ ((mode(__word__))); - -struct DIstruct { - SItype high, low; -}; - -typedef union { - struct DIstruct s; - DItype ll; -} DIunion; +#include "gcclib.h" #ifdef CONFIG_ARITHMETIC_OPS_L1 DItype __lshrdi3(DItype u, word_type b)__attribute__((l1_text)); -- cgit v1.1 From fb4b5d3a379824d94fd71fc1aa78e9dbcb15b948 Mon Sep 17 00:00:00 2001 From: Mike Frysinger <vapier@gentoo.org> Date: Mon, 29 Jun 2009 14:20:10 -0400 Subject: Blackfin: handle BF561 Core B memory regions better when SMP=n Rather than assume Core B is always run with caches turned on, let people load into any of the on-chip memory regions. It is their business how the SRAM/Cache regions are utilized, so don't prevent them from being able to load into them. Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- arch/blackfin/kernel/process.c | 14 +++++++------- arch/blackfin/mach-bf561/include/mach/mem_map.h | 23 ++++++++++++++++++++++- 2 files changed, 29 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c index 79cad0a..9da36ba 100644 --- a/arch/blackfin/kernel/process.c +++ b/arch/blackfin/kernel/process.c @@ -361,7 +361,7 @@ static inline int in_mem_const(unsigned long addr, unsigned long size, unsigned long const_addr, unsigned long const_size) { - return in_mem_const_off(addr, 0, size, const_addr, const_size); + return in_mem_const_off(addr, size, 0, const_addr, const_size); } #define IN_ASYNC(bnum, bctlnum) \ ({ \ @@ -390,13 +390,13 @@ int bfin_mem_access_type(unsigned long addr, unsigned long size) if (in_mem_const(addr, size, L1_DATA_B_START, L1_DATA_B_LENGTH)) return cpu == 0 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA; #ifdef COREB_L1_CODE_START - if (in_mem_const(addr, size, COREB_L1_CODE_START, L1_CODE_LENGTH)) + if (in_mem_const(addr, size, COREB_L1_CODE_START, COREB_L1_CODE_LENGTH)) return cpu == 1 ? BFIN_MEM_ACCESS_ITEST : BFIN_MEM_ACCESS_IDMA; if (in_mem_const(addr, size, COREB_L1_SCRATCH_START, L1_SCRATCH_LENGTH)) return cpu == 1 ? BFIN_MEM_ACCESS_CORE_ONLY : -EFAULT; - if (in_mem_const(addr, size, COREB_L1_DATA_A_START, L1_DATA_A_LENGTH)) + if (in_mem_const(addr, size, COREB_L1_DATA_A_START, COREB_L1_DATA_A_LENGTH)) return cpu == 1 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA; - if (in_mem_const(addr, size, COREB_L1_DATA_B_START, L1_DATA_B_LENGTH)) + if (in_mem_const(addr, size, COREB_L1_DATA_B_START, COREB_L1_DATA_B_LENGTH)) return cpu == 1 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA; #endif if (in_mem_const(addr, size, L2_START, L2_LENGTH)) @@ -472,13 +472,13 @@ int _access_ok(unsigned long addr, unsigned long size) if (in_mem_const_off(addr, size, _ebss_b_l1 - _sdata_b_l1, L1_DATA_B_START, L1_DATA_B_LENGTH)) return 1; #ifdef COREB_L1_CODE_START - if (in_mem_const(addr, size, COREB_L1_CODE_START, L1_CODE_LENGTH)) + if (in_mem_const(addr, size, COREB_L1_CODE_START, COREB_L1_CODE_LENGTH)) return 1; if (in_mem_const(addr, size, COREB_L1_SCRATCH_START, L1_SCRATCH_LENGTH)) return 1; - if (in_mem_const(addr, size, COREB_L1_DATA_A_START, L1_DATA_A_LENGTH)) + if (in_mem_const(addr, size, COREB_L1_DATA_A_START, COREB_L1_DATA_A_LENGTH)) return 1; - if (in_mem_const(addr, size, COREB_L1_DATA_B_START, L1_DATA_B_LENGTH)) + if (in_mem_const(addr, size, COREB_L1_DATA_B_START, COREB_L1_DATA_B_LENGTH)) return 1; #endif if (in_mem_const_off(addr, size, _ebss_l2 - _stext_l2, L2_START, L2_LENGTH)) diff --git a/arch/blackfin/mach-bf561/include/mach/mem_map.h b/arch/blackfin/mach-bf561/include/mach/mem_map.h index a63e15c..5b96ea5 100644 --- a/arch/blackfin/mach-bf561/include/mach/mem_map.h +++ b/arch/blackfin/mach-bf561/include/mach/mem_map.h @@ -37,7 +37,6 @@ /* Memory Map for ADSP-BF561 processors */ -#ifdef CONFIG_BF561 #define COREA_L1_CODE_START 0xFFA00000 #define COREA_L1_DATA_A_START 0xFF800000 #define COREA_L1_DATA_B_START 0xFF900000 @@ -74,6 +73,28 @@ #define BFIN_DCACHESIZE (0*1024) #define BFIN_DSUPBANKS 0 #endif /*CONFIG_BFIN_DCACHE*/ + +/* + * If we are in SMP mode, then the cache settings of Core B will match + * the settings of Core A. If we aren't, then we assume Core B is not + * using any cache. This allows the rest of the kernel to work with + * the core in either mode as we are only loading user code into it and + * it is the user's problem to make sure they aren't doing something + * stupid there. + * + * Note that we treat the L1 code region as a contiguous blob to make + * the rest of the kernel simpler. Easier to check one region than a + * bunch of small ones. Again, possible misbehavior here is the fault + * of the user -- don't try to use memory that doesn't exist. + */ +#ifdef CONFIG_SMP +# define COREB_L1_CODE_LENGTH L1_CODE_LENGTH +# define COREB_L1_DATA_A_LENGTH L1_DATA_A_LENGTH +# define COREB_L1_DATA_B_LENGTH L1_DATA_B_LENGTH +#else +# define COREB_L1_CODE_LENGTH 0x14000 +# define COREB_L1_DATA_A_LENGTH 0x8000 +# define COREB_L1_DATA_B_LENGTH 0x8000 #endif /* Level 2 Memory */ -- cgit v1.1 From 532f07ca04c6f8ab0555b00cf5d42dc6f72b802f Mon Sep 17 00:00:00 2001 From: Mike Frysinger <vapier@gentoo.org> Date: Mon, 29 Jun 2009 22:45:50 +0000 Subject: Blackfin: fix early_dma_memcpy() handling of busy channels The early logic to locate a free DMA channel and then set it up was broken in a few ways that only manifested itself when we needed to set up more than 2 on chip SRAM regions (most board defaults setup 1 or 2). First, we checked the wrong status register (the destination gets updated, not the source) and second, we did the ssync before rather than after resetting a DMA config register. Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- arch/blackfin/kernel/bfin_dma_5xx.c | 29 ++++++++++++++--------------- 1 file changed, 14 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c index e0bf8cc..9f9b828 100644 --- a/arch/blackfin/kernel/bfin_dma_5xx.c +++ b/arch/blackfin/kernel/bfin_dma_5xx.c @@ -253,32 +253,31 @@ void __init early_dma_memcpy(void *pdst, const void *psrc, size_t size) BUG_ON(src % 4); BUG_ON(size % 4); - /* Force a sync in case a previous config reset on this channel - * occurred. This is needed so subsequent writes to DMA registers - * are not spuriously lost/corrupted. - */ - __builtin_bfin_ssync(); - src_ch = 0; /* Find an avalible memDMA channel */ while (1) { - if (!src_ch || src_ch == (struct dma_register *)MDMA_S1_NEXT_DESC_PTR) { - dst_ch = (struct dma_register *)MDMA_D0_NEXT_DESC_PTR; - src_ch = (struct dma_register *)MDMA_S0_NEXT_DESC_PTR; - } else { + if (src_ch == (struct dma_register *)MDMA_S0_NEXT_DESC_PTR) { dst_ch = (struct dma_register *)MDMA_D1_NEXT_DESC_PTR; src_ch = (struct dma_register *)MDMA_S1_NEXT_DESC_PTR; + } else { + dst_ch = (struct dma_register *)MDMA_D0_NEXT_DESC_PTR; + src_ch = (struct dma_register *)MDMA_S0_NEXT_DESC_PTR; } - if (!bfin_read16(&src_ch->cfg)) { + if (!bfin_read16(&src_ch->cfg)) + break; + else if (bfin_read16(&dst_ch->irq_status) & DMA_DONE) { + bfin_write16(&src_ch->cfg, 0); break; - } else { - if (bfin_read16(&src_ch->irq_status) & DMA_DONE) - bfin_write16(&src_ch->cfg, 0); } - } + /* Force a sync in case a previous config reset on this channel + * occurred. This is needed so subsequent writes to DMA registers + * are not spuriously lost/corrupted. + */ + __builtin_bfin_ssync(); + /* Destination */ bfin_write32(&dst_ch->start_addr, dst); bfin_write16(&dst_ch->x_count, size >> 2); -- cgit v1.1 From 10a5ecd03f9f5c374f954cf50a4f85d73f8ce338 Mon Sep 17 00:00:00 2001 From: Graf Yang <graf.yang@analog.com> Date: Wed, 1 Jul 2009 04:08:01 +0000 Subject: Blackfin: update handling of anomaly 364 (wrong rev id in BF527-0.1) This anomaly only applies to the BF527-0.1, not the BF526-0.1, and not any other revision of the BF527. So make sure we don't go returning 0xffff for other cases. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- arch/blackfin/include/asm/processor.h | 21 +++++++-------------- 1 file changed, 7 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/include/asm/processor.h b/arch/blackfin/include/asm/processor.h index d0be99b..a36ad8d 100644 --- a/arch/blackfin/include/asm/processor.h +++ b/arch/blackfin/include/asm/processor.h @@ -105,23 +105,16 @@ static inline uint32_t __pure bfin_revid(void) /* Always use CHIPID, to work around ANOMALY_05000234 */ uint32_t revid = (bfin_read_CHIPID() & CHIPID_VERSION) >> 28; -#ifdef CONFIG_BF52x - /* ANOMALY_05000357 +#ifdef _BOOTROM_GET_DXE_ADDRESS_TWI + /* + * ANOMALY_05000364 * Incorrect Revision Number in DSPID Register */ - if (revid == 0) - switch (bfin_read16(_BOOTROM_GET_DXE_ADDRESS_TWI)) { - case 0x0010: - revid = 0; - break; - case 0x2796: - revid = 1; - break; - default: - revid = 0xFFFF; - break; - } + if (ANOMALY_05000364 && + bfin_read16(_BOOTROM_GET_DXE_ADDRESS_TWI) == 0x2796) + revid = 1; #endif + return revid; } -- cgit v1.1 From f1c717fbf89f5a24d539ecf4baa5d4c3888e3bf9 Mon Sep 17 00:00:00 2001 From: Sonic Zhang <sonic.zhang@analog.com> Date: Wed, 1 Jul 2009 07:43:23 +0000 Subject: Blackfin: fix wrong CTS inversion The Blackfin serial headers were inverting the CTS value leading to wrong handling of the CTS line which broke CTS/RTS handling completely. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h | 2 +- arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h | 2 +- arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h | 2 +- arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h | 2 +- arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h | 2 +- arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h | 2 +- 6 files changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h index 0fb2ce5..dbade93 100644 --- a/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h @@ -53,7 +53,7 @@ #define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) #define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) -#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin)) +#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1) #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0) #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) diff --git a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h index a625659..ebd6ceb 100644 --- a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h @@ -53,7 +53,7 @@ #define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) #define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) -#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin)) +#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1) #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0) #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) diff --git a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h index a3789d7..4062e24 100644 --- a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h @@ -53,7 +53,7 @@ #define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) #define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) -#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin)) +#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1) #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0) #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) diff --git a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h index b86662f..e95d54f 100644 --- a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h @@ -53,7 +53,7 @@ #define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) #define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) -#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin)) +#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1) #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0) #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) diff --git a/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h index c536551..999f239 100644 --- a/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h @@ -53,7 +53,7 @@ #define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) #define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) -#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin)) +#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1) #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0) #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) diff --git a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h index a1b5087..fd5e887 100644 --- a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h @@ -53,7 +53,7 @@ #define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) #define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) -#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin)) +#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1) #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0) #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) -- cgit v1.1 From ebd5833327e3fb46eb55553d8f5432b5226bf897 Mon Sep 17 00:00:00 2001 From: Michael Hennerich <michael.hennerich@analog.com> Date: Thu, 2 Jul 2009 11:00:38 +0000 Subject: Blackfin: fix incomplete renaming of the bfin-twi-lcd driver The sed used to rename the bfin-twi-lcd only replaced the first instance rather than all which led to the resources not being enabled when the driver was built as a module. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- arch/blackfin/mach-bf518/boards/ezbrd.c | 2 +- arch/blackfin/mach-bf527/boards/cm_bf527.c | 2 +- arch/blackfin/mach-bf527/boards/ezbrd.c | 2 +- arch/blackfin/mach-bf527/boards/ezkit.c | 2 +- arch/blackfin/mach-bf533/boards/stamp.c | 2 +- arch/blackfin/mach-bf537/boards/stamp.c | 2 +- arch/blackfin/mach-bf548/boards/ezkit.c | 2 +- 7 files changed, 7 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c index d979110..809be26 100644 --- a/arch/blackfin/mach-bf518/boards/ezbrd.c +++ b/arch/blackfin/mach-bf518/boards/ezbrd.c @@ -534,7 +534,7 @@ static struct platform_device i2c_bfin_twi_device = { #endif static struct i2c_board_info __initdata bfin_i2c_board_info[] = { -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) +#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), }, diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c index f4867ce..b09484f 100644 --- a/arch/blackfin/mach-bf527/boards/cm_bf527.c +++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c @@ -793,7 +793,7 @@ static struct platform_device i2c_bfin_twi_device = { #endif static struct i2c_board_info __initdata bfin_i2c_board_info[] = { -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) +#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), .type = "pcf8574_lcd", diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c index b2f30f0..2ad68cd 100644 --- a/arch/blackfin/mach-bf527/boards/ezbrd.c +++ b/arch/blackfin/mach-bf527/boards/ezbrd.c @@ -591,7 +591,7 @@ static struct platform_device i2c_bfin_twi_device = { #endif static struct i2c_board_info __initdata bfin_i2c_board_info[] = { -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) +#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), }, diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c index 799a1d1..75e563d 100644 --- a/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/arch/blackfin/mach-bf527/boards/ezkit.c @@ -858,7 +858,7 @@ static struct platform_device i2c_bfin_twi_device = { #endif static struct i2c_board_info __initdata bfin_i2c_board_info[] = { -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) +#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), }, diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index a68ade8..3d743cc 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -453,7 +453,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { .irq = 39, }, #endif -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) +#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), }, diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index c1f76dd..ab92e42 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -1316,7 +1316,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { .irq = IRQ_PF5, }, #endif -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) +#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), }, diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c index 81f5b95..dc0dd9b 100644 --- a/arch/blackfin/mach-bf548/boards/ezkit.c +++ b/arch/blackfin/mach-bf548/boards/ezkit.c @@ -864,7 +864,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info0[] = { #if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */ static struct i2c_board_info __initdata bfin_i2c_board_info1[] = { -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) +#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), }, -- cgit v1.1 From 3a920accbb5f88d753ab5a6a47d0dd48b6269f84 Mon Sep 17 00:00:00 2001 From: Robin Getz <robin.getz@analog.com> Date: Mon, 6 Jul 2009 14:29:08 +0000 Subject: Blackfin: drop duplicate runtime checking of anomaly 05000448 We already catch this anomaly at compile time, and the runtime version is such that it ends up checking on all parts rather than just the ones that might actually have it. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- arch/blackfin/kernel/setup.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index e4d2da7..98c2f79 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -937,10 +937,6 @@ void __init setup_arch(char **cmdline_p) CPU, bfin_revid()); } - /* We can't run on BF548-0.1 due to ANOMALY 05000448 */ - if (bfin_cpuid() == 0x27de && bfin_revid() == 1) - panic("You can't run on this processor due to 05000448"); - printk(KERN_INFO "Blackfin Linux support by http://blackfin.uclinux.org/\n"); printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu MHz System Clock\n", -- cgit v1.1 From ad863a9dc9887330b2ab753323063865c59d8db6 Mon Sep 17 00:00:00 2001 From: Robin Getz <robin.getz@analog.com> Date: Tue, 7 Jul 2009 02:47:14 +0000 Subject: Blackfin: fix handling of IPEND in interrupt context save The interrupt context save logic incorrectly stored the address of the IPEND register rather than its value due to a missing dereference. While we're here, also enable this code for all kernel debugging scenarios and not just when KGDB is enabled. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- arch/blackfin/include/asm/context.S | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/include/asm/context.S b/arch/blackfin/include/asm/context.S index 16561ab..f8a664f 100644 --- a/arch/blackfin/include/asm/context.S +++ b/arch/blackfin/include/asm/context.S @@ -223,9 +223,10 @@ [--sp] = RETN; [--sp] = RETE; [--sp] = SEQSTAT; -#ifdef CONFIG_KGDB - r1.l = lo(IPEND); - r1.h = hi(IPEND); +#ifdef CONFIG_DEBUG_KERNEL + p1.l = lo(IPEND); + p1.h = hi(IPEND); + r1 = [p1]; [--sp] = r1; #else [--sp] = r0; /* Skip IPEND as well. */ -- cgit v1.1 From 4c94c3e09adba9718218d6e3d35b2dfae81f3911 Mon Sep 17 00:00:00 2001 From: Barry Song <barry.song@analog.com> Date: Tue, 7 Jul 2009 07:41:50 +0000 Subject: Blackfin: bf537-stamp: fix irq decl for AD7142 The AD7142 add-on card hooks the IRQ line up to PG5, not PF5. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- arch/blackfin/mach-bf537/boards/stamp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index ab92e42..bd65690 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -1313,7 +1313,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { #if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE) { I2C_BOARD_INFO("ad7142_joystick", 0x2C), - .irq = IRQ_PF5, + .irq = IRQ_PG5, }, #endif #if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) -- cgit v1.1 From c03c2a87347b849ec927d7d2ea79a6955e19f492 Mon Sep 17 00:00:00 2001 From: Michael Hennerich <michael.hennerich@analog.com> Date: Wed, 8 Jul 2009 12:04:43 +0000 Subject: Blackfin: fix bugs in GPIO resume code Change the bfin_gpio_pm_hibernate_restore() function to: 1) AND restored DATA with DIR (not OR) to get correct final state 2) Restore DATA before setting DIR to avoid glitches Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- arch/blackfin/kernel/bfin_gpio.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c index beffa00..6b94462 100644 --- a/arch/blackfin/kernel/bfin_gpio.c +++ b/arch/blackfin/kernel/bfin_gpio.c @@ -686,14 +686,12 @@ void bfin_gpio_pm_hibernate_restore(void) *port_fer[bank] = gpio_bank_saved[bank].fer; #endif gpio_array[bank]->inen = gpio_bank_saved[bank].inen; + gpio_array[bank]->data_set = gpio_bank_saved[bank].data + & gpio_bank_saved[bank].dir; gpio_array[bank]->dir = gpio_bank_saved[bank].dir; gpio_array[bank]->polar = gpio_bank_saved[bank].polar; gpio_array[bank]->edge = gpio_bank_saved[bank].edge; gpio_array[bank]->both = gpio_bank_saved[bank].both; - - gpio_array[bank]->data_set = gpio_bank_saved[bank].data - | gpio_bank_saved[bank].dir; - gpio_array[bank]->maska = gpio_bank_saved[bank].maska; } AWA_DUMMY_READ(maska); -- cgit v1.1 From c70c754ff916cedd969a73549799d2167ffefcd6 Mon Sep 17 00:00:00 2001 From: Michael Hennerich <michael.hennerich@analog.com> Date: Thu, 9 Jul 2009 09:58:52 +0000 Subject: Blackfin: drop per-cpu loops_per_jiffy tracking On Blackfin SMP, a per-cpu loops_per_jiffy is pointless since both cores always run at the same CCLK. In addition, the current implementation has flaws since the main consumer for loops_per_jiffy (asm/delay.h) uses the global kernel loops_per_jiffy and not the per_cpu one. So punt all of the per-cpu handling and go back to the global shared one. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- arch/blackfin/include/asm/cpu.h | 1 - arch/blackfin/kernel/setup.c | 7 +++---- arch/blackfin/mach-common/smp.c | 2 +- 3 files changed, 4 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/include/asm/cpu.h b/arch/blackfin/include/asm/cpu.h index 565b813..fadfa82 100644 --- a/arch/blackfin/include/asm/cpu.h +++ b/arch/blackfin/include/asm/cpu.h @@ -32,7 +32,6 @@ struct blackfin_cpudata { struct task_struct *idle; unsigned int imemctl; unsigned int dmemctl; - unsigned long loops_per_jiffy; unsigned long dcache_invld_count; unsigned long icache_invld_count; }; diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index 98c2f79..6225eda 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -168,7 +168,6 @@ void __cpuinit bfin_setup_cpudata(unsigned int cpu) struct blackfin_cpudata *cpudata = &per_cpu(cpu_data, cpu); cpudata->idle = current; - cpudata->loops_per_jiffy = loops_per_jiffy; cpudata->imemctl = bfin_read_IMEM_CONTROL(); cpudata->dmemctl = bfin_read_DMEM_CONTROL(); } @@ -1159,9 +1158,9 @@ static int show_cpuinfo(struct seq_file *m, void *v) sclk/1000000, sclk%1000000); seq_printf(m, "bogomips\t: %lu.%02lu\n" "Calibration\t: %lu loops\n", - (cpudata->loops_per_jiffy * HZ) / 500000, - ((cpudata->loops_per_jiffy * HZ) / 5000) % 100, - (cpudata->loops_per_jiffy * HZ)); + (loops_per_jiffy * HZ) / 500000, + ((loops_per_jiffy * HZ) / 5000) % 100, + (loops_per_jiffy * HZ)); /* Check Cache configutation */ switch (cpudata->dmemctl & (1 << DMC0_P | 1 << DMC1_P)) { diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c index 6184005..e6e3429 100644 --- a/arch/blackfin/mach-common/smp.c +++ b/arch/blackfin/mach-common/smp.c @@ -450,7 +450,7 @@ void __init smp_cpus_done(unsigned int max_cpus) unsigned int cpu; for_each_online_cpu(cpu) - bogosum += per_cpu(cpu_data, cpu).loops_per_jiffy; + bogosum += loops_per_jiffy; printk(KERN_INFO "SMP: Total of %d processors activated " "(%lu.%02lu BogoMIPS).\n", -- cgit v1.1 From f574a76a3b19848ac61814756716e26f85f2c3f7 Mon Sep 17 00:00:00 2001 From: Robin Getz <robin.getz@analog.com> Date: Thu, 9 Jul 2009 15:11:52 +0000 Subject: Blackfin: work around anomaly 05000189 Similar to anomaly 05000281 but not as bad, we cannot return to the instruction causing a fault otherwise we'll trigger a second false exception. The system can still recover, but it isn't correct. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- arch/blackfin/kernel/traps.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index 9efac0f..bf2b2d1 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -621,7 +621,8 @@ asmlinkage void trap_c(struct pt_regs *fp) } if ((ANOMALY_05000461 && trapnr == VEC_HWERR && !access_ok(VERIFY_READ, fp->pc, 8)) || - (ANOMALY_05000281 && trapnr == VEC_HWERR)) + (ANOMALY_05000281 && trapnr == VEC_HWERR) || + (ANOMALY_05000189 && (trapnr == VEC_CPLB_I_VL || trapnr == VEC_CPLB_VL))) fp->pc = SAFE_USER_INSTRUCTION; traps_done: -- cgit v1.1 From 5bc6e3cfe6db5f33c60f042a9ba203431f334756 Mon Sep 17 00:00:00 2001 From: Graf Yang <graf.yang@analog.com> Date: Fri, 10 Jul 2009 11:34:51 +0000 Subject: Blackfin: add CPLB entries for Core B on-chip L1 SRAM regions The Blackfin SMP port was missing CPLB entries for Core B on-chip L1 SRAM regions. Any code that attempted to use these would wrongly crash due to a CPLB miss. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- arch/blackfin/kernel/cplb-nompu/cplbinit.c | 23 +++++++++++++++++------ 1 file changed, 17 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/kernel/cplb-nompu/cplbinit.c b/arch/blackfin/kernel/cplb-nompu/cplbinit.c index d6c0677..685f160 100644 --- a/arch/blackfin/kernel/cplb-nompu/cplbinit.c +++ b/arch/blackfin/kernel/cplb-nompu/cplbinit.c @@ -72,13 +72,24 @@ void __init generate_cplb_tables_cpu(unsigned int cpu) } /* Cover L1 memory. One 4M area for code and data each is enough. */ - if (L1_DATA_A_LENGTH || L1_DATA_B_LENGTH) { - d_tbl[i_d].addr = L1_DATA_A_START; - d_tbl[i_d++].data = L1_DMEMORY | PAGE_SIZE_4MB; + if (cpu == 0) { + if (L1_DATA_A_LENGTH || L1_DATA_B_LENGTH) { + d_tbl[i_d].addr = L1_DATA_A_START; + d_tbl[i_d++].data = L1_DMEMORY | PAGE_SIZE_4MB; + } + i_tbl[i_i].addr = L1_CODE_START; + i_tbl[i_i++].data = L1_IMEMORY | PAGE_SIZE_4MB; } - i_tbl[i_i].addr = L1_CODE_START; - i_tbl[i_i++].data = L1_IMEMORY | PAGE_SIZE_4MB; - +#ifdef CONFIG_SMP + else { + if (L1_DATA_A_LENGTH || L1_DATA_B_LENGTH) { + d_tbl[i_d].addr = COREB_L1_DATA_A_START; + d_tbl[i_d++].data = L1_DMEMORY | PAGE_SIZE_4MB; + } + i_tbl[i_i].addr = COREB_L1_CODE_START; + i_tbl[i_i++].data = L1_IMEMORY | PAGE_SIZE_4MB; + } +#endif first_switched_dcplb = i_d; first_switched_icplb = i_i; -- cgit v1.1 From 994e9a2e01f47f7ce24dec7edc45d70401468370 Mon Sep 17 00:00:00 2001 From: Julia Lawall <julia@diku.dk> Date: Tue, 14 Jul 2009 03:15:19 +0000 Subject: arch/blackfin: Add kmalloc NULL tests Check that the result of kmalloc is not NULL before passing it to other functions. In the first two cases, the new code returns -ENOMEM, which seems compatible with what is done for similar functions for other architectures. In the last two cases, the new code fails silently, ie just returns, because the function has void return type. The semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression *x; identifier f; constant char *C; @@ x = \(kmalloc\|kcalloc\|kzalloc\)(...); ... when != x == NULL when != x != NULL when != (x || ...) ( kfree(x) | f(...,C,...,x,...) | *f(...,x,...) | *x->f ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- arch/blackfin/mach-common/smp.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c index e6e3429..349ee3f 100644 --- a/arch/blackfin/mach-common/smp.c +++ b/arch/blackfin/mach-common/smp.c @@ -211,6 +211,8 @@ int smp_call_function(void (*func)(void *info), void *info, int wait) return 0; msg = kmalloc(sizeof(*msg), GFP_ATOMIC); + if (!msg) + return -ENOMEM; INIT_LIST_HEAD(&msg->list); msg->call_struct.func = func; msg->call_struct.info = info; @@ -252,6 +254,8 @@ int smp_call_function_single(int cpuid, void (*func) (void *info), void *info, cpu_set(cpu, callmap); msg = kmalloc(sizeof(*msg), GFP_ATOMIC); + if (!msg) + return -ENOMEM; INIT_LIST_HEAD(&msg->list); msg->call_struct.func = func; msg->call_struct.info = info; @@ -287,6 +291,8 @@ void smp_send_reschedule(int cpu) return; msg = kmalloc(sizeof(*msg), GFP_ATOMIC); + if (!msg) + return; memset(msg, 0, sizeof(msg)); INIT_LIST_HEAD(&msg->list); msg->type = BFIN_IPI_RESCHEDULE; @@ -314,6 +320,8 @@ void smp_send_stop(void) return; msg = kmalloc(sizeof(*msg), GFP_ATOMIC); + if (!msg) + return; memset(msg, 0, sizeof(msg)); INIT_LIST_HEAD(&msg->list); msg->type = BFIN_IPI_CPU_STOP; -- cgit v1.1 From 6843f405da9d0adf734d8f695311e29cc92a220c Mon Sep 17 00:00:00 2001 From: Mike Frysinger <vapier@gentoo.org> Date: Thu, 16 Jul 2009 13:53:37 -0400 Subject: Blackfin: define HARDIRQ_BITS again for now The default values of HARDIRQ_BITS and PREEMPT_BITS in common code leads to build failure: In file included from include/linux/interrupt.h:12, from include/linux/kernel_stat.h:8, from arch/blackfin/kernel/asm-offsets.c:32: include/linux/hardirq.h:66:2: error: #error PREEMPT_ACTIVE is too low! So until that gets resolved, just declare our own default value again. Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- arch/blackfin/include/asm/hardirq.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/blackfin/include/asm/hardirq.h b/arch/blackfin/include/asm/hardirq.h index cbd52f8..0b78b87 100644 --- a/arch/blackfin/include/asm/hardirq.h +++ b/arch/blackfin/include/asm/hardirq.h @@ -6,6 +6,9 @@ extern void ack_bad_irq(unsigned int irq); #define ack_bad_irq ack_bad_irq +/* Define until common code gets sane defaults */ +#define HARDIRQ_BITS 9 + #include <asm-generic/hardirq.h> #endif -- cgit v1.1 From 5780888bcac316508eb5f4dd23bbea8b5057647c Mon Sep 17 00:00:00 2001 From: Matias Zabaljauregui <zabaljauregui@gmail.com> Date: Thu, 18 Jun 2009 11:44:06 -0300 Subject: lguest: fix journey fix: "make Guest" was complaining about duplicated G:032 Signed-off-by: Matias Zabaljauregui <zabaljauregui@gmail.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> --- arch/x86/include/asm/lguest_hcall.h | 2 +- arch/x86/lguest/boot.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/lguest_hcall.h b/arch/x86/include/asm/lguest_hcall.h index d31c4a6..33600a6 100644 --- a/arch/x86/include/asm/lguest_hcall.h +++ b/arch/x86/include/asm/lguest_hcall.h @@ -30,7 +30,7 @@ #include <asm/hw_irq.h> #include <asm/kvm_para.h> -/*G:031 But first, how does our Guest contact the Host to ask for privileged +/*G:030 But first, how does our Guest contact the Host to ask for privileged * operations? There are two ways: the direct way is to make a "hypercall", * to make requests of the Host Itself. * diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c index 7bc65f0..0188fd3 100644 --- a/arch/x86/lguest/boot.c +++ b/arch/x86/lguest/boot.c @@ -1079,7 +1079,7 @@ static unsigned lguest_patch(u8 type, u16 clobber, void *ibuf, return insn_len; } -/*G:030 Once we get to lguest_init(), we know we're a Guest. The various +/*G:029 Once we get to lguest_init(), we know we're a Guest. The various * pv_ops structures in the kernel provide points for (almost) every routine we * have to override to avoid privileged instructions. */ __init void lguest_init(void) -- cgit v1.1 From 7a5049205f7265620c48781814155f2763e70abb Mon Sep 17 00:00:00 2001 From: Rusty Russell <rusty@rustcorp.com.au> Date: Fri, 17 Jul 2009 21:47:44 -0600 Subject: lguest: restrict CPUID to avoid perf counter wrmsr Avoid the following: [ 0.012093] WARNING: at arch/x86/kernel/apic/apic.c:249 native_apic_write_dummy+0x2f/0x40() Rather than chase each new cpuid-detected feature, just lie about the highest valid CPUID so this code is never run. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> --- arch/x86/lguest/boot.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c index 0188fd3..f2bf1f7 100644 --- a/arch/x86/lguest/boot.c +++ b/arch/x86/lguest/boot.c @@ -379,6 +379,11 @@ static void lguest_cpuid(unsigned int *ax, unsigned int *bx, native_cpuid(ax, bx, cx, dx); switch (function) { + case 0: /* ID and highest CPUID. Futureproof a little by sticking to + * older ones. */ + if (*ax > 5) + *ax = 5; + break; case 1: /* Basic feature request. */ /* We only allow kernel to see SSE3, CMPXCHG16B and SSSE3 */ *cx &= 0x00002201; -- cgit v1.1 From d740d347f856f0fd8baf2f63d8daa600ed135bfd Mon Sep 17 00:00:00 2001 From: Linus Walleij <linus.walleij@stericsson.com> Date: Thu, 16 Jul 2009 22:40:26 +0100 Subject: [ARM] 5608/1: Updated U300 defconfig Removed the LBD support that isn't of any use right now at least, then remove remnants of the TCM config flags that somehow crept in by mistake (not yet merged patch for 2.6.32) and then the usual defconfig noise from updated menus. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> --- arch/arm/configs/u300_defconfig | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig index 4762d90..7d61ae6 100644 --- a/arch/arm/configs/u300_defconfig +++ b/arch/arm/configs/u300_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc1 -# Thu Jul 2 00:16:59 2009 +# Linux kernel version: 2.6.31-rc3 +# Thu Jul 16 23:36:10 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -9,7 +9,6 @@ CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_MMU=y -CONFIG_HAVE_TCM=y CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -113,7 +112,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -CONFIG_LBDAF=y +# CONFIG_LBDAF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -542,13 +541,14 @@ CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_LM8323 is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set -# CONFIG_KEYBOARD_LM8323 is not set -# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set @@ -911,7 +911,6 @@ CONFIG_REGULATOR=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set CONFIG_FILE_LOCKING=y @@ -1122,7 +1121,6 @@ CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC32 is not set # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_GENERIC_ALLOCATOR=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -- cgit v1.1 From 6f409461210baf76ade1bfdd9470fd5b98378b36 Mon Sep 17 00:00:00 2001 From: Fenghua Yu <fenghua.yu@intel.com> Date: Thu, 9 Jul 2009 21:23:39 -0700 Subject: Fix ia64 compilation IS_ERR and PTE_ERR errors. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When building ia64 kernel with CONFIG_XEN_SYS_HYPERVISOR, compiler reports errors: drivers/xen/sys-hypervisor.c: In function ‘uuid_show’: drivers/xen/sys-hypervisor.c:125: error: implicit declaration of function ‘IS_ERR’ drivers/xen/sys-hypervisor.c:126: error: implicit declaration of function ‘PTR_ERR’ This patch fixes the errors. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> --- arch/ia64/include/asm/xen/hypervisor.h | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/ia64/include/asm/xen/hypervisor.h b/arch/ia64/include/asm/xen/hypervisor.h index e425227..88afb54 100644 --- a/arch/ia64/include/asm/xen/hypervisor.h +++ b/arch/ia64/include/asm/xen/hypervisor.h @@ -33,6 +33,7 @@ #ifndef _ASM_IA64_XEN_HYPERVISOR_H #define _ASM_IA64_XEN_HYPERVISOR_H +#include <linux/err.h> #include <xen/interface/xen.h> #include <xen/interface/version.h> /* to compile feature.c */ #include <xen/features.h> /* to comiple xen-netfront.c */ -- cgit v1.1 From 390bd132b2831a2ad0268e84bffbfc0680debfe5 Mon Sep 17 00:00:00 2001 From: fujita <fujita@tulip.osrg.net> Date: Thu, 9 Jul 2009 21:25:05 -0700 Subject: Add dma_debug_init() for ia64 The commit 9916219579d078c80377dd3988c2cc213536d868 was supposed to add CONFIG_DMA_API_DEBUG support to IA64 however I forgot to add dma_debug_init(). Signed-off-by: fujita <fujita@tulip.osrg.net> Acked-by: Fenghua Yu <fenghua.yu@intel.com> --- arch/ia64/kernel/dma-mapping.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/ia64/kernel/dma-mapping.c b/arch/ia64/kernel/dma-mapping.c index 086a2ae..39a3cd0 100644 --- a/arch/ia64/kernel/dma-mapping.c +++ b/arch/ia64/kernel/dma-mapping.c @@ -6,6 +6,14 @@ int iommu_detected __read_mostly; struct dma_map_ops *dma_ops; EXPORT_SYMBOL(dma_ops); +#define PREALLOC_DMA_DEBUG_ENTRIES (1 << 16) + +static int __init dma_init(void) +{ + dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES); +} +fs_initcall(dma_init); + struct dma_map_ops *dma_get_ops(struct device *dev) { return dma_ops; -- cgit v1.1 From 18282b36d742347abd9a4bc74fe9fd2432a8335b Mon Sep 17 00:00:00 2001 From: Aurelien Jarno <aurelien@aurel32.net> Date: Fri, 17 Jul 2009 06:35:05 -0700 Subject: Revert "Neither asm/types.h nor linux/types.h is required for arch/ia64/include/asm/fpu.h" asm/fpu.h uses the __IA64_UL macro which is declared in asm/types.h, so this include is really required. Without it, GNU libc fails to build. This reverts commit 2678c07b07ac2076675e5d57653bdf02e9af1950. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Acked-by: Fenghua Yu <fenghua.yu@intel.com> --- arch/ia64/include/asm/fpu.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/ia64/include/asm/fpu.h b/arch/ia64/include/asm/fpu.h index 0c26157..b6395ad 100644 --- a/arch/ia64/include/asm/fpu.h +++ b/arch/ia64/include/asm/fpu.h @@ -6,6 +6,8 @@ * David Mosberger-Tang <davidm@hpl.hp.com> */ +#include <linux/types.h> + /* floating point status register: */ #define FPSR_TRAP_VD (1 << 0) /* invalid op trap disabled */ #define FPSR_TRAP_DD (1 << 1) /* denormal trap disabled */ -- cgit v1.1 From 04e448d9a386640a79a4aa71251aa1cdd314f662 Mon Sep 17 00:00:00 2001 From: Tim Abbott <tabbott@ksplice.com> Date: Sun, 12 Jul 2009 18:23:33 -0400 Subject: vmlinux.lds.h: restructure BSS linker script macros The BSS section macros in vmlinux.lds.h currently place the .sbss input section outside the bounds of [__bss_start, __bss_end]. On all architectures except for microblaze that handle both .sbss and __bss_start/__bss_end, this is wrong: the .sbss input section is within the range [__bss_start, __bss_end]. Relatedly, the example code at the top of the file actually has __bss_start/__bss_end defined twice; I believe the right fix here is to define them in the BSS_SECTION macro but not in the BSS macro. Another problem with the current macros is that several architectures have an ALIGN(4) or some other small number just before __bss_stop in their linker scripts. The BSS_SECTION macro currently hardcodes this to 4; while it should really be an argument. It also ignores its sbss_align argument; fix that. mn10300 is the only user at present of any of the macros touched by this patch. It looks like mn10300 actually was incorrectly converted to use the new BSS() macro (the alignment of 4 prior to conversion was a __bss_stop alignment, but the argument to the BSS macro is a start alignment). So fix this as well. I'd like acks from Sam and David on this one. Also CCing Paul, since he has a patch from me which will need to be updated to use BSS_SECTION(0, PAGE_SIZE, 4) once this gets merged. Signed-off-by: Tim Abbott <tabbott@ksplice.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> --- arch/mn10300/kernel/vmlinux.lds.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mn10300/kernel/vmlinux.lds.S b/arch/mn10300/kernel/vmlinux.lds.S index c96ba3d..f4aa079 100644 --- a/arch/mn10300/kernel/vmlinux.lds.S +++ b/arch/mn10300/kernel/vmlinux.lds.S @@ -107,7 +107,7 @@ SECTIONS __init_end = .; /* freed after init ends here */ - BSS(4) + BSS_SECTION(0, PAGE_SIZE, 4) _end = . ; -- cgit v1.1 From eb9069119d1c4bc856b4c1339abcad0105691e71 Mon Sep 17 00:00:00 2001 From: Haojian Zhuang <haojian.zhuang@marvell.com> Date: Wed, 15 Jul 2009 19:47:24 +0800 Subject: [ARM] pxa: fix gpio issue in zylonite WARNING: at drivers/gpio/gpiolib.c:83 gpio_ensure_requested+0x58/0xbc() autorequest GPIO-71 Modules linked in: [<c0028bd0>] (unwind_backtrace+0x0/0xe8) from [<c003c328>] (warn_slowpath_common+0x48/0x78) [<c003c328>] (warn_slowpath_common+0x48/0x78) from [<c003c394>] (warn_slowpath_fmt+0x28/0x38) [<c003c394>] (warn_slowpath_fmt+0x28/0x38) from [<c0146128>] (gpio_ensure_requested+0x58/0xbc) [<c0146128>] (gpio_ensure_requested+0x58/0xbc) from [<c0146308>] (gpio_direction_input+0x80/0xf4) [<c0146308>] (gpio_direction_input+0x80/0xf4) from [<c000c668>] (zylonite_pxa300_init+0x108/0x214) [<c000c668>] (zylonite_pxa300_init+0x108/0x214) from [<c000c4e4>] (zylonite_init+0x8/0x84) [<c000c4e4>] (zylonite_init+0x8/0x84) from [<c00097cc>] (customize_machine+0x18/0x24) [<c00097cc>] (customize_machine+0x18/0x24) from [<c00222e0>] (do_one_initcall+0x30/0x1b0) [<c00222e0>] (do_one_initcall+0x30/0x1b0) from [<c00083f4>] (kernel_init+0xa4/0x11c) [<c00083f4>] (kernel_init+0xa4/0x11c) from [<c0023f3c>] (kernel_thread_exit+0x0/0x8) ---[ end trace 1b75b31a2719ed1c ]--- This issue is caused by using gpio pin without request. Add gpio_request() into zylonite. To simplify the code, error checking is omitted since this is being performed early. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com> --- arch/arm/mach-pxa/zylonite_pxa300.c | 2 ++ arch/arm/mach-pxa/zylonite_pxa320.c | 2 ++ 2 files changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c index cefd1c0..8409544 100644 --- a/arch/arm/mach-pxa/zylonite_pxa300.c +++ b/arch/arm/mach-pxa/zylonite_pxa300.c @@ -197,10 +197,12 @@ static void __init zylonite_detect_lcd_panel(void) for (i = 0; i < NUM_LCD_DETECT_PINS; i++) { id = id << 1; gpio = mfp_to_gpio(lcd_detect_pins[i]); + gpio_request(gpio, "LCD_ID_PINS"); gpio_direction_input(gpio); if (gpio_get_value(gpio)) id = id | 0x1; + gpio_free(gpio); } /* lcd id, flush out bit 1 */ diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c index cc5a228..60d08f2 100644 --- a/arch/arm/mach-pxa/zylonite_pxa320.c +++ b/arch/arm/mach-pxa/zylonite_pxa320.c @@ -176,10 +176,12 @@ static void __init zylonite_detect_lcd_panel(void) for (i = 0; i < NUM_LCD_DETECT_PINS; i++) { id = id << 1; gpio = mfp_to_gpio(lcd_detect_pins[i]); + gpio_request(gpio, "LCD_ID_PINS"); gpio_direction_input(gpio); if (gpio_get_value(gpio)) id = id | 0x1; + gpio_free(gpio); } /* lcd id, flush out bit 1 */ -- cgit v1.1 From ecf763c5677faee04d47333e6ed8e9539a427770 Mon Sep 17 00:00:00 2001 From: Marek Vasut <marek.vasut@gmail.com> Date: Thu, 16 Jul 2009 19:37:29 +0200 Subject: [ARM] pxa: add STUART MFP config for PalmTX,T5,LD Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com> --- arch/arm/mach-pxa/palmld.c | 4 ++++ arch/arm/mach-pxa/palmt5.c | 4 ++++ arch/arm/mach-pxa/palmtx.c | 4 ++++ 3 files changed, 12 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c index ed70f28..169fcc1 100644 --- a/arch/arm/mach-pxa/palmld.c +++ b/arch/arm/mach-pxa/palmld.c @@ -128,6 +128,10 @@ static unsigned long palmld_pin_config[] __initdata = { GPIO38_GPIO, /* wifi ready */ GPIO81_GPIO, /* wifi reset */ + /* FFUART */ + GPIO34_FFUART_RXD, + GPIO39_FFUART_TXD, + /* HDD */ GPIO98_GPIO, /* HDD reset */ GPIO115_GPIO, /* HDD power */ diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c index aae64a1..33f726f 100644 --- a/arch/arm/mach-pxa/palmt5.c +++ b/arch/arm/mach-pxa/palmt5.c @@ -111,6 +111,10 @@ static unsigned long palmt5_pin_config[] __initdata = { /* PWM */ GPIO16_PWM0_OUT, + /* FFUART */ + GPIO34_FFUART_RXD, + GPIO39_FFUART_TXD, + /* MISC */ GPIO10_GPIO, /* hotsync button */ GPIO90_GPIO, /* power detect */ diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c index 6c15d84..83d0208 100644 --- a/arch/arm/mach-pxa/palmtx.c +++ b/arch/arm/mach-pxa/palmtx.c @@ -127,6 +127,10 @@ static unsigned long palmtx_pin_config[] __initdata = { GPIO76_LCD_PCLK, GPIO77_LCD_BIAS, + /* FFUART */ + GPIO34_FFUART_RXD, + GPIO39_FFUART_TXD, + /* MISC. */ GPIO10_GPIO, /* hotsync button */ GPIO12_GPIO, /* power detect */ -- cgit v1.1 From 6aa542a694dc9ea4344a8a590d2628c33d1b9431 Mon Sep 17 00:00:00 2001 From: Alexey Fisher <bug-track@fisher-privat.net> Date: Wed, 15 Jul 2009 14:16:09 +0200 Subject: x86: Add quirk for Intel DG45ID board to avoid low memory corruption AMI BIOS with low memory corruption was found on Intel DG45ID board (Bug 13710). Add this board to the blacklist - in the (somewhat optimistic) hope of future boards/BIOSes from Intel not having this bug. Also see: http://bugzilla.kernel.org/show_bug.cgi?id=13736 Signed-off-by: Alexey Fisher <bug-track@fisher-privat.net> Cc: ykzhao <yakui.zhao@intel.com> Cc: alan@lxorguk.ukuu.org.uk Cc: <stable@kernel.org> LKML-Reference: <1247660169-4503-1-git-send-email-bug-track@fisher-privat.net> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/kernel/setup.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index de2cab1..63f32d2 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -672,6 +672,19 @@ static struct dmi_system_id __initdata bad_bios_dmi_table[] = { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies"), }, }, + { + /* + * AMI BIOS with low memory corruption was found on Intel DG45ID board. + * It hase different DMI_BIOS_VENDOR = "Intel Corp.", for now we will + * match only DMI_BOARD_NAME and see if there is more bad products + * with this vendor. + */ + .callback = dmi_low_memory_corruption, + .ident = "AMI BIOS", + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "DG45ID"), + }, + }, #endif {} }; -- cgit v1.1 From 8bcdbe427924a1e4b4e4cf68020e92e9f93fe011 Mon Sep 17 00:00:00 2001 From: Catalin Marinas <catalin.marinas@arm.com> Date: Tue, 14 Jul 2009 10:52:55 +0100 Subject: x86: Include all of .data.* sections in _edata on 64-bit The .data.read_mostly and .data.cacheline_aligned sections aren't covered by the _sdata .. _edata range on x86-64. This affects kmemleak reporting leading to possible false positives by not scanning the whole data section. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Alexey Fisher <bug-track@fisher-privat.net> Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: Pekka Enberg <penberg@cs.helsinki.fi> LKML-Reference: <1247565175.28240.37.camel@pc1117.cambridge.arm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Sam Ravnborg <sam@ravnborg.org> --- arch/x86/kernel/vmlinux.lds.S | 7 ------- 1 file changed, 7 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S index 367e878..59f31d2 100644 --- a/arch/x86/kernel/vmlinux.lds.S +++ b/arch/x86/kernel/vmlinux.lds.S @@ -112,11 +112,6 @@ SECTIONS _sdata = .; DATA_DATA CONSTRUCTORS - -#ifdef CONFIG_X86_64 - /* End of data section */ - _edata = .; -#endif } :data #ifdef CONFIG_X86_32 @@ -156,10 +151,8 @@ SECTIONS .data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) { *(.data.read_mostly) -#ifdef CONFIG_X86_32 /* End of data section */ _edata = .; -#endif } #ifdef CONFIG_X86_64 -- cgit v1.1 From 64e8be6ebdb8212898781fff7722ff2b0eb76131 Mon Sep 17 00:00:00 2001 From: Russell King <rmk@dyn-67.arm.linux.org.uk> Date: Sat, 18 Jul 2009 15:51:55 +0100 Subject: ARM: Realview & Versatile: Fix i2c_board_info definitions Fix i2c_board_info definitions - we were defining the 'type' field of these structures twice since the first argument of I2C_BOARD_INFO sets this field. Move the second definition into I2C_BOARD_INFO(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Jean Delvare <khali@linux-fr.org> Acked-by: Ben Dooks <ben-linux@fluff.org> --- arch/arm/mach-realview/core.c | 3 +-- arch/arm/mach-versatile/core.c | 3 +-- 2 files changed, 2 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index 9ea9c05..facbd49 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -208,8 +208,7 @@ struct platform_device realview_i2c_device = { static struct i2c_board_info realview_i2c_board_info[] = { { - I2C_BOARD_INFO("rtc-ds1307", 0xd0 >> 1), - .type = "ds1338", + I2C_BOARD_INFO("ds1338", 0xd0 >> 1), }, }; diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index 69214fc..31093af 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -342,8 +342,7 @@ static struct platform_device versatile_i2c_device = { static struct i2c_board_info versatile_i2c_board_info[] = { { - I2C_BOARD_INFO("rtc-ds1307", 0xd0 >> 1), - .type = "ds1338", + I2C_BOARD_INFO("ds1338", 0xd0 >> 1), }, }; -- cgit v1.1 From 0ecf24ef49d4f46ff5d6af357c3b9ec8d798160d Mon Sep 17 00:00:00 2001 From: Sonic Zhang <sonic.zhang@analog.com> Date: Mon, 20 Jul 2009 16:05:37 +0100 Subject: blackfin: fix wrong CTS inversion The Blackfin serial headers were inverting the CTS value leading to wrong handling of the CTS line which broke CTS/RTS handling completely. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> --- arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h | 2 +- arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h | 2 +- arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h | 2 +- arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h | 2 +- arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h | 2 +- arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h | 2 +- 6 files changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h index 0fb2ce5..dbade93 100644 --- a/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h @@ -53,7 +53,7 @@ #define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) #define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) -#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin)) +#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1) #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0) #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) diff --git a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h index a625659..ebd6ceb 100644 --- a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h @@ -53,7 +53,7 @@ #define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) #define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) -#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin)) +#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1) #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0) #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) diff --git a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h index a3789d7..4062e24 100644 --- a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h @@ -53,7 +53,7 @@ #define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) #define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) -#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin)) +#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1) #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0) #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) diff --git a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h index b86662f..e95d54f 100644 --- a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h @@ -53,7 +53,7 @@ #define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) #define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) -#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin)) +#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1) #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0) #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) diff --git a/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h index c536551..999f239 100644 --- a/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h @@ -53,7 +53,7 @@ #define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) #define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) -#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin)) +#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1) #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0) #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) diff --git a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h index a1b5087..fd5e887 100644 --- a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h @@ -53,7 +53,7 @@ #define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) #define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) -#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin)) +#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1) #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0) #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) -- cgit v1.1 From 77f32dfdd97857280ae1ebac64382ff082cd7ea0 Mon Sep 17 00:00:00 2001 From: Denis Turischev <denis@compulab.co.il> Date: Mon, 20 Jul 2009 18:48:17 +0300 Subject: x86: Add reboot fixup for SBC-fitPC2 The CompuLab SBC-fitPC2 board needs to reboot via BIOS. Signed-off-by: Denis Turischev <denis@compulab.co.il> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: H. Peter Anvin <hpa@zytor.com> --- arch/x86/kernel/reboot.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index d2d1ce8..508e982 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -249,6 +249,14 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "VGN-Z540N"), }, }, + { /* Handle problems with rebooting on CompuLab SBC-FITPC2 */ + .callback = set_bios_reboot, + .ident = "CompuLab SBC-FITPC2", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "CompuLab"), + DMI_MATCH(DMI_PRODUCT_NAME, "SBC-FITPC2"), + }, + }, { } }; -- cgit v1.1 From 155b73529583c38f30fd394d692b15a893960782 Mon Sep 17 00:00:00 2001 From: Uros Bizjak <ubizjak@gmail.com> Date: Sun, 19 Jul 2009 18:06:35 +0200 Subject: x86: Fix movq immediate operand constraints in uaccess_64.h arch/x86/include/asm/uaccess_64.h uses wrong asm operand constraint ("ir") for movq insn. Since movq sign-extends its immediate operand, "er" constraint should be used instead. Attached patch changes all uses of __put_user_asm in uaccess_64.h to use "er" when "q" insn suffix is involved. Patch was compile tested on x86_64 with defconfig. Signed-off-by: Uros Bizjak <ubizjak@gmail.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: stable@kernel.org --- arch/x86/include/asm/uaccess_64.h | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/uaccess_64.h b/arch/x86/include/asm/uaccess_64.h index 8cc6873..db24b21 100644 --- a/arch/x86/include/asm/uaccess_64.h +++ b/arch/x86/include/asm/uaccess_64.h @@ -88,11 +88,11 @@ int __copy_to_user(void __user *dst, const void *src, unsigned size) ret, "l", "k", "ir", 4); return ret; case 8:__put_user_asm(*(u64 *)src, (u64 __user *)dst, - ret, "q", "", "ir", 8); + ret, "q", "", "er", 8); return ret; case 10: __put_user_asm(*(u64 *)src, (u64 __user *)dst, - ret, "q", "", "ir", 10); + ret, "q", "", "er", 10); if (unlikely(ret)) return ret; asm("":::"memory"); @@ -101,12 +101,12 @@ int __copy_to_user(void __user *dst, const void *src, unsigned size) return ret; case 16: __put_user_asm(*(u64 *)src, (u64 __user *)dst, - ret, "q", "", "ir", 16); + ret, "q", "", "er", 16); if (unlikely(ret)) return ret; asm("":::"memory"); __put_user_asm(1[(u64 *)src], 1 + (u64 __user *)dst, - ret, "q", "", "ir", 8); + ret, "q", "", "er", 8); return ret; default: return copy_user_generic((__force void *)dst, src, size); @@ -157,7 +157,7 @@ int __copy_in_user(void __user *dst, const void __user *src, unsigned size) ret, "q", "", "=r", 8); if (likely(!ret)) __put_user_asm(tmp, (u64 __user *)dst, - ret, "q", "", "ir", 8); + ret, "q", "", "er", 8); return ret; } default: -- cgit v1.1 From ebe119cd0929df4878f758ebf880cb435e4dcaaf Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" <hpa@zytor.com> Date: Mon, 20 Jul 2009 23:27:39 -0700 Subject: x86: Fix movq immediate operand constraints in uaccess.h The movq instruction, generated by __put_user_asm() when used for 64-bit data, takes a sign-extended immediate ("e") not a zero-extended immediate ("Z"). Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: Uros Bizjak <ubizjak@gmail.com> Cc: stable@kernel.org --- arch/x86/include/asm/uaccess.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/uaccess.h b/arch/x86/include/asm/uaccess.h index 20e6a79..d2c6c93 100644 --- a/arch/x86/include/asm/uaccess.h +++ b/arch/x86/include/asm/uaccess.h @@ -212,9 +212,9 @@ extern int __get_user_bad(void); : "A" ((typeof(*(ptr)))(x)), "c" (ptr) : "ebx") #else #define __put_user_asm_u64(x, ptr, retval, errret) \ - __put_user_asm(x, ptr, retval, "q", "", "Zr", errret) + __put_user_asm(x, ptr, retval, "q", "", "er", errret) #define __put_user_asm_ex_u64(x, addr) \ - __put_user_asm_ex(x, addr, "q", "", "Zr") + __put_user_asm_ex(x, addr, "q", "", "er") #define __put_user_x8(x, ptr, __ret_pu) __put_user_x(8, x, ptr, __ret_pu) #endif -- cgit v1.1 From e9084ec98bb9aa3abc6cf73181177780ce7546f8 Mon Sep 17 00:00:00 2001 From: Jan Beulich <JBeulich@novell.com> Date: Thu, 16 Jul 2009 09:45:11 +0100 Subject: x86, mce: Fix set_trigger() accessor Fix the condition checking the result of strchr() (which previously could result in an oops), and make the function return the number of bytes actively used. [ Impact: fix oops ] Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: Andi Kleen <andi@firstfloor.org> LKML-Reference: <4A5F04B7020000780000AB59@vpn.id2.novell.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> --- arch/x86/kernel/cpu/mcheck/mce.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index 484c1e5..1cfb623 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -1692,17 +1692,15 @@ static ssize_t set_trigger(struct sys_device *s, struct sysdev_attribute *attr, const char *buf, size_t siz) { char *p; - int len; strncpy(mce_helper, buf, sizeof(mce_helper)); mce_helper[sizeof(mce_helper)-1] = 0; - len = strlen(mce_helper); p = strchr(mce_helper, '\n'); - if (*p) + if (p) *p = 0; - return len; + return strlen(mce_helper) + !!p; } static ssize_t set_ignore_ce(struct sys_device *s, -- cgit v1.1 From 429b2b319af3987e808c18f6b81313104caf782c Mon Sep 17 00:00:00 2001 From: Andi Kleen <andi@firstfloor.org> Date: Sat, 18 Jul 2009 08:56:57 +0200 Subject: x86-64: Fix bad_srat() to clear all state Need to clear both nodes and nodes_add state for start/end. Signed-off-by: Andi Kleen <ak@linux.intel.com> LKML-Reference: <20090718065657.GA2898@basil.fritz.box> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: stable@kernel.org --- arch/x86/mm/srat_64.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c index 2dfcbf9..dbb5381 100644 --- a/arch/x86/mm/srat_64.c +++ b/arch/x86/mm/srat_64.c @@ -79,8 +79,10 @@ static __init void bad_srat(void) acpi_numa = -1; for (i = 0; i < MAX_LOCAL_APIC; i++) apicid_to_node[i] = NUMA_NO_NODE; - for (i = 0; i < MAX_NUMNODES; i++) - nodes_add[i].start = nodes[i].end = 0; + for (i = 0; i < MAX_NUMNODES; i++) { + nodes[i].start = nodes[i].end = 0; + nodes_add[i].start = nodes_add[i].end = 0; + } remove_all_active_ranges(); } -- cgit v1.1 From 6effa8f6fc786f00e3a23eae605e0f2e8e748faa Mon Sep 17 00:00:00 2001 From: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Date: Wed, 22 Jul 2009 11:56:20 +0900 Subject: x86, mce: Rename incorrect macro name "CONFIG_X86_THRESHOLD" CONFIG_X86_THRESHOLD used in arch/x86/kernel/irqinit.c is always undefined. Rename it to the correct name "CONFIG_X86_MCE_THRESHOLD". Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Reviewed-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Cc: Andi Kleen <andi@firstfloor.org> LKML-Reference: <4A667FD4.3010509@hitachi.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> --- arch/x86/kernel/irqinit.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c index 696f0e4..92b7703 100644 --- a/arch/x86/kernel/irqinit.c +++ b/arch/x86/kernel/irqinit.c @@ -187,7 +187,7 @@ static void __init apic_intr_init(void) #ifdef CONFIG_X86_THERMAL_VECTOR alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); #endif -#ifdef CONFIG_X86_THRESHOLD +#ifdef CONFIG_X86_MCE_THRESHOLD alloc_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt); #endif #if defined(CONFIG_X86_NEW_MCE) && defined(CONFIG_X86_LOCAL_APIC) -- cgit v1.1 From 9b7019ae6a542a801a80df6694c66e240e2c3e39 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra <a.p.zijlstra@chello.nl> Date: Wed, 22 Jul 2009 16:31:36 +0200 Subject: perf_counter: Remove unused variables Fix a gcc unused variables warning. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> --- arch/x86/kernel/cpu/perf_counter.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c index 7e346d4..a7aa8f9 100644 --- a/arch/x86/kernel/cpu/perf_counter.c +++ b/arch/x86/kernel/cpu/perf_counter.c @@ -1570,8 +1570,6 @@ static struct x86_pmu amd_pmu = { static int p6_pmu_init(void) { - int high, low; - switch (boot_cpu_data.x86_model) { case 1: case 3: /* Pentium Pro */ -- cgit v1.1 From 2cb078603abb612e3bcd428fb8122c3d39e08832 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge <jeremy@goop.org> Date: Wed, 22 Jul 2009 09:59:35 -0700 Subject: x86, amd: Don't probe for extended APIC ID if APICs are disabled If we've logically disabled apics, don't probe the PCI space for the AMD extended APIC ID. [ Impact: prevent boot crash under Xen. ] Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Reported-by: Bastian Blank <bastian@waldi.eu.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com> --- arch/x86/kernel/cpu/amd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index 28e5f59..e2485b0 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -356,7 +356,7 @@ static void __cpuinit early_init_amd(struct cpuinfo_x86 *c) #endif #if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_PCI) /* check CPU config space for extended APIC ID */ - if (c->x86 >= 0xf) { + if (cpu_has_apic && c->x86 >= 0xf) { unsigned int val; val = read_pci_config(0, 24, 0, 0x68); if ((val & ((1 << 17) | (1 << 18))) == ((1 << 17) | (1 << 18))) -- cgit v1.1 From 1d3e216f1d303878d7204de94dee251bc2702175 Mon Sep 17 00:00:00 2001 From: Mike Rapoport <mike@compulab.co.il> Date: Tue, 21 Jul 2009 17:09:52 +0300 Subject: [ARM] pxa/em-x270: fix compile failure when CONFIG_APM_EMULATION=n If CONFIG_APM_EMULATION=n em-x270 build fails with linker error: arch/arm/mach-pxa/built-in.o: In function `em_x270_battery_critical': em-x270.c:(.text+0x12c0): undefined reference to `apm_queue_event' arch/arm/mach-pxa/built-in.o: In function `em_x270_battery_low': em-x270.c:(.text+0x12c8): undefined reference to `apm_queue_event' make: *** [.tmp_vmlinux1] Error 1 Fix it. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com> --- arch/arm/mach-pxa/em-x270.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index 63b10d9..9cd0946 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -1141,12 +1141,16 @@ struct power_supply_info em_x270_psy_info = { static void em_x270_battery_low(void) { +#if defined(CONFIG_APM_EMULATION) apm_queue_event(APM_LOW_BATTERY); +#endif } static void em_x270_battery_critical(void) { +#if defined(CONFIG_APM_EMULATION) apm_queue_event(APM_CRITICAL_SUSPEND); +#endif } struct da9030_battery_info em_x270_batterty_info = { -- cgit v1.1 From dc78baa2b90b289590911b40b6800f77d0dc935a Mon Sep 17 00:00:00 2001 From: Nicolas Ferre <nicolas.ferre@atmel.com> Date: Fri, 3 Jul 2009 19:24:33 +0200 Subject: dmaengine: at_hdmac: new driver for the Atmel AHB DMA Controller This AHB DMA Controller (aka HDMA or DMAC on AT91 systems) is availlable on at91sam9rl chip. It will be used on other products in the future. This first release covers only the memory-to-memory tranfer type. This is the only tranfer type supported by this chip. On other products, it will be used also for peripheral DMA transfer (slave API support to come). I used dmatest client without problem in different configurations to test it. Full documentation for this controller can be found in the SAM9RL datasheet: http://www.atmel.com/dyn/products/product_card.asp?part_id=4243 Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> --- arch/arm/mach-at91/include/mach/at_hdmac.h | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 arch/arm/mach-at91/include/mach/at_hdmac.h (limited to 'arch') diff --git a/arch/arm/mach-at91/include/mach/at_hdmac.h b/arch/arm/mach-at91/include/mach/at_hdmac.h new file mode 100644 index 0000000..21a5554 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/at_hdmac.h @@ -0,0 +1,26 @@ +/* + * Header file for the Atmel AHB DMA Controller driver + * + * Copyright (C) 2008 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#ifndef AT_HDMAC_H +#define AT_HDMAC_H + +#include <linux/dmaengine.h> + +/** + * struct at_dma_platform_data - Controller configuration parameters + * @nr_channels: Number of channels supported by hardware (max 8) + * @cap_mask: dma_capability flags supported by the platform + */ +struct at_dma_platform_data { + unsigned int nr_channels; + dma_cap_mask_t cap_mask; +}; + +#endif /* AT_HDMAC_H */ -- cgit v1.1 From 808347f6a31792079e345ec865e9cfcb6e8ae6b2 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre <nicolas.ferre@atmel.com> Date: Wed, 22 Jul 2009 20:04:45 +0200 Subject: dmaengine: at_hdmac: add DMA slave transfers This patch for at_hdmac adds the slave transfers capability to the Atmel DMA controller available on some AT91 SOCs. This allow peripheral to memory and memory to peripheral transfers with hardware handshaking. Slave structure for controller specific information is passed through channel private data. This at_dma_slave structure is defined in at_hdmac.h header file and relative hardware definition are moved to this file from at_hdmac_regs.h. Doing this we allow the channel configuration from platform definition code. This work is intensively based on dw_dmac and several slave implementations. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> --- arch/arm/mach-at91/include/mach/at_hdmac.h | 76 ++++++++++++++++++++++++++++++ 1 file changed, 76 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-at91/include/mach/at_hdmac.h b/arch/arm/mach-at91/include/mach/at_hdmac.h index 21a5554..187cb58 100644 --- a/arch/arm/mach-at91/include/mach/at_hdmac.h +++ b/arch/arm/mach-at91/include/mach/at_hdmac.h @@ -23,4 +23,80 @@ struct at_dma_platform_data { dma_cap_mask_t cap_mask; }; +/** + * enum at_dma_slave_width - DMA slave register access width. + * @AT_DMA_SLAVE_WIDTH_8BIT: Do 8-bit slave register accesses + * @AT_DMA_SLAVE_WIDTH_16BIT: Do 16-bit slave register accesses + * @AT_DMA_SLAVE_WIDTH_32BIT: Do 32-bit slave register accesses + */ +enum at_dma_slave_width { + AT_DMA_SLAVE_WIDTH_8BIT = 0, + AT_DMA_SLAVE_WIDTH_16BIT, + AT_DMA_SLAVE_WIDTH_32BIT, +}; + +/** + * struct at_dma_slave - Controller-specific information about a slave + * @dma_dev: required DMA master device + * @tx_reg: physical address of data register used for + * memory-to-peripheral transfers + * @rx_reg: physical address of data register used for + * peripheral-to-memory transfers + * @reg_width: peripheral register width + * @cfg: Platform-specific initializer for the CFG register + * @ctrla: Platform-specific initializer for the CTRLA register + */ +struct at_dma_slave { + struct device *dma_dev; + dma_addr_t tx_reg; + dma_addr_t rx_reg; + enum at_dma_slave_width reg_width; + u32 cfg; + u32 ctrla; +}; + + +/* Platform-configurable bits in CFG */ +#define ATC_SRC_PER(h) (0xFU & (h)) /* Channel src rq associated with periph handshaking ifc h */ +#define ATC_DST_PER(h) ((0xFU & (h)) << 4) /* Channel dst rq associated with periph handshaking ifc h */ +#define ATC_SRC_REP (0x1 << 8) /* Source Replay Mod */ +#define ATC_SRC_H2SEL (0x1 << 9) /* Source Handshaking Mod */ +#define ATC_SRC_H2SEL_SW (0x0 << 9) +#define ATC_SRC_H2SEL_HW (0x1 << 9) +#define ATC_DST_REP (0x1 << 12) /* Destination Replay Mod */ +#define ATC_DST_H2SEL (0x1 << 13) /* Destination Handshaking Mod */ +#define ATC_DST_H2SEL_SW (0x0 << 13) +#define ATC_DST_H2SEL_HW (0x1 << 13) +#define ATC_SOD (0x1 << 16) /* Stop On Done */ +#define ATC_LOCK_IF (0x1 << 20) /* Interface Lock */ +#define ATC_LOCK_B (0x1 << 21) /* AHB Bus Lock */ +#define ATC_LOCK_IF_L (0x1 << 22) /* Master Interface Arbiter Lock */ +#define ATC_LOCK_IF_L_CHUNK (0x0 << 22) +#define ATC_LOCK_IF_L_BUFFER (0x1 << 22) +#define ATC_AHB_PROT_MASK (0x7 << 24) /* AHB Protection */ +#define ATC_FIFOCFG_MASK (0x3 << 28) /* FIFO Request Configuration */ +#define ATC_FIFOCFG_LARGESTBURST (0x0 << 28) +#define ATC_FIFOCFG_HALFFIFO (0x1 << 28) +#define ATC_FIFOCFG_ENOUGHSPACE (0x2 << 28) + +/* Platform-configurable bits in CTRLA */ +#define ATC_SCSIZE_MASK (0x7 << 16) /* Source Chunk Transfer Size */ +#define ATC_SCSIZE_1 (0x0 << 16) +#define ATC_SCSIZE_4 (0x1 << 16) +#define ATC_SCSIZE_8 (0x2 << 16) +#define ATC_SCSIZE_16 (0x3 << 16) +#define ATC_SCSIZE_32 (0x4 << 16) +#define ATC_SCSIZE_64 (0x5 << 16) +#define ATC_SCSIZE_128 (0x6 << 16) +#define ATC_SCSIZE_256 (0x7 << 16) +#define ATC_DCSIZE_MASK (0x7 << 20) /* Destination Chunk Transfer Size */ +#define ATC_DCSIZE_1 (0x0 << 20) +#define ATC_DCSIZE_4 (0x1 << 20) +#define ATC_DCSIZE_8 (0x2 << 20) +#define ATC_DCSIZE_16 (0x3 << 20) +#define ATC_DCSIZE_32 (0x4 << 20) +#define ATC_DCSIZE_64 (0x5 << 20) +#define ATC_DCSIZE_128 (0x6 << 20) +#define ATC_DCSIZE_256 (0x7 << 20) + #endif /* AT_HDMAC_H */ -- cgit v1.1 From 3174c88af4b6b2e81cacfaa2bb90cc7abe36f1cc Mon Sep 17 00:00:00 2001 From: Hartley Sweeten <hartleys@visionengravers.com> Date: Mon, 20 Jul 2009 18:12:23 +0100 Subject: [ARM] 5611/1: ep93xx: update ts72xx nor flash support Update the NOR flash support for TS-7200. The TS-7200 models all have 16-bit NOR flash. Update the platform init to support this. Remove the private TS72XX_NOR_* defines and use the common ep93xx defines for the external chip select physical base address instead. Move the NOR flash registration into a static __init function. When the NAND flash support is updated this function will also be used to register the NAND flash for the TS-7250 and TS-7260. Tested-by: Matthieu Crapet <mcrapet@gmail.com> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> --- arch/arm/mach-ep93xx/include/mach/ts72xx.h | 3 --- arch/arm/mach-ep93xx/ts72xx.c | 18 +++++++++++++----- 2 files changed, 13 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-ep93xx/include/mach/ts72xx.h b/arch/arm/mach-ep93xx/include/mach/ts72xx.h index 34ddec0..4117344 100644 --- a/arch/arm/mach-ep93xx/include/mach/ts72xx.h +++ b/arch/arm/mach-ep93xx/include/mach/ts72xx.h @@ -41,9 +41,6 @@ #define TS72XX_OPTIONS2_TS9420_BOOT 0x02 -#define TS72XX_NOR_PHYS_BASE 0x60000000 -#define TS72XX_NOR2_PHYS_BASE 0x62000000 - #define TS72XX_NAND1_DATA_PHYS_BASE 0x60000000 #define TS72XX_NAND2_DATA_PHYS_BASE 0x70000000 #define TS72XX_NAND_DATA_VIRT_BASE 0xfebfc000 diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c index 7ee024d..aaf1371 100644 --- a/arch/arm/mach-ep93xx/ts72xx.c +++ b/arch/arm/mach-ep93xx/ts72xx.c @@ -112,13 +112,16 @@ static void __init ts72xx_map_io(void) } } +/************************************************************************* + * NOR flash (TS-7200 only) + *************************************************************************/ static struct physmap_flash_data ts72xx_flash_data = { - .width = 1, + .width = 2, }; static struct resource ts72xx_flash_resource = { - .start = TS72XX_NOR_PHYS_BASE, - .end = TS72XX_NOR_PHYS_BASE + SZ_16M - 1, + .start = EP93XX_CS6_PHYS_BASE, + .end = EP93XX_CS6_PHYS_BASE + SZ_16M - 1, .flags = IORESOURCE_MEM, }; @@ -132,6 +135,12 @@ static struct platform_device ts72xx_flash = { .resource = &ts72xx_flash_resource, }; +static void __init ts72xx_register_flash(void) +{ + if (board_is_ts7200()) + platform_device_register(&ts72xx_flash); +} + static unsigned char ts72xx_rtc_readbyte(unsigned long addr) { __raw_writeb(addr, TS72XX_RTC_INDEX_VIRT_BASE); @@ -165,8 +174,7 @@ static struct ep93xx_eth_data ts72xx_eth_data = { static void __init ts72xx_init_machine(void) { ep93xx_init_devices(); - if (board_is_ts7200()) - platform_device_register(&ts72xx_flash); + ts72xx_register_flash(); platform_device_register(&ts72xx_rtc_device); ep93xx_register_eth(&ts72xx_eth_data, 1); -- cgit v1.1 From d6c585a4342a2ff627a29f9aea77c5ed4cd76023 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner <tglx@linutronix.de> Date: Fri, 24 Jul 2009 08:34:59 +0200 Subject: x86: geode: Mark mfgpt irq IRQF_TIMER to prevent resume failure Timer interrupts are excluded from being disabled during suspend. The clock events code manages the disabling of clock events on its own because the timer interrupt needs to be functional before the resume code reenables the device interrupts. The mfgpt timer request its interrupt without setting the IRQF_TIMER flag so suspend_device_irqs() disables it as well which results in a fatal resume failure. Adding IRQF_TIMER to the interupt flags when requesting the mrgpt timer interrupt solves the problem. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <new-submission> Cc: Andres Salomon <dilinger@debian.org> Cc: stable@kernel.org --- arch/x86/kernel/mfgpt_32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/mfgpt_32.c b/arch/x86/kernel/mfgpt_32.c index 846510b..2a62d84 100644 --- a/arch/x86/kernel/mfgpt_32.c +++ b/arch/x86/kernel/mfgpt_32.c @@ -347,7 +347,7 @@ static irqreturn_t mfgpt_tick(int irq, void *dev_id) static struct irqaction mfgptirq = { .handler = mfgpt_tick, - .flags = IRQF_DISABLED | IRQF_NOBALANCING, + .flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_TIMER, .name = "mfgpt-timer" }; -- cgit v1.1 From 5f954c3426190f7ae432a09abd62164d5d14c709 Mon Sep 17 00:00:00 2001 From: Heiko Carstens <heiko.carstens@de.ibm.com> Date: Fri, 24 Jul 2009 12:39:49 +0200 Subject: [S390] hibernation: fix lowcore handling Our swsusp_arch_suspend() backend implementation disables prefixing by setting the contents of the prefix register to 0. However afterwards common code functions are called which might access percpu data structures. Since the lowcore contains e.g. the percpu base pointer this isn't a good idea. So fix this by copying the hibernating cpu's lowcore to absolute address zero. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> --- arch/s390/kernel/early.c | 4 ++-- arch/s390/power/swsusp_asm64.S | 13 ++++++++----- 2 files changed, 10 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c index f9b1440..8d15314 100644 --- a/arch/s390/kernel/early.c +++ b/arch/s390/kernel/early.c @@ -210,7 +210,7 @@ static noinline __init void detect_machine_type(void) machine_flags |= MACHINE_FLAG_VM; } -static void early_pgm_check_handler(void) +static __init void early_pgm_check_handler(void) { unsigned long addr; const struct exception_table_entry *fixup; @@ -222,7 +222,7 @@ static void early_pgm_check_handler(void) S390_lowcore.program_old_psw.addr = fixup->fixup | PSW_ADDR_AMODE; } -void setup_lowcore_early(void) +static noinline __init void setup_lowcore_early(void) { psw_t psw; diff --git a/arch/s390/power/swsusp_asm64.S b/arch/s390/power/swsusp_asm64.S index 76d688d..e27bd31 100644 --- a/arch/s390/power/swsusp_asm64.S +++ b/arch/s390/power/swsusp_asm64.S @@ -40,11 +40,11 @@ swsusp_arch_suspend: /* Store prefix register on stack */ stpx __SF_EMPTY(%r15) - /* Setup base register for lowcore (absolute 0) */ - llgf %r1,__SF_EMPTY(%r15) + /* Save prefix register contents for lowcore */ + llgf %r4,__SF_EMPTY(%r15) /* Get pointer to save area */ - aghi %r1,0x1000 + lghi %r1,0x1000 /* Store registers */ mvc 0x318(4,%r1),__SF_EMPTY(%r15) /* move prefix to lowcore */ @@ -79,8 +79,11 @@ swsusp_arch_suspend: xc __SF_EMPTY(4,%r15),__SF_EMPTY(%r15) spx __SF_EMPTY(%r15) - /* Setup lowcore */ - brasl %r14,setup_lowcore_early + lghi %r2,0 + lghi %r3,2*PAGE_SIZE + lghi %r5,2*PAGE_SIZE +1: mvcle %r2,%r4,0 + jo 1b /* Save image */ brasl %r14,swsusp_save -- cgit v1.1 From c63b196afcf22405527abe4c2c57926a5bbd6fc9 Mon Sep 17 00:00:00 2001 From: Heiko Carstens <heiko.carstens@de.ibm.com> Date: Fri, 24 Jul 2009 12:39:50 +0200 Subject: [S390] hibernation: fix register corruption on machine checks swsusp_arch_suspend() actually saves all cpu register contents on hibernation. Machine checks must be disabled since swsusp_arch_suspend() stores register contents to their lowcore save areas. That's the same place where register contents on machine checks would be saved. To avoid register corruption disable machine checks. We must also disable machine checks in the new psw mask for program checks, since swsusp_arch_suspend() may generate program checks. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> --- arch/s390/power/swsusp.c | 36 ++++++++++++++++++++++++------------ arch/s390/power/swsusp_asm64.S | 22 +--------------------- 2 files changed, 25 insertions(+), 33 deletions(-) (limited to 'arch') diff --git a/arch/s390/power/swsusp.c b/arch/s390/power/swsusp.c index e6a4fe9..bd1f5c6 100644 --- a/arch/s390/power/swsusp.c +++ b/arch/s390/power/swsusp.c @@ -7,24 +7,36 @@ * */ +#include <asm/system.h> -/* - * save CPU registers before creating a hibernation image and before - * restoring the memory state from it - */ void save_processor_state(void) { - /* implentation contained in the - * swsusp_arch_suspend function + /* swsusp_arch_suspend() actually saves all cpu register contents. + * Machine checks must be disabled since swsusp_arch_suspend() stores + * register contents to their lowcore save areas. That's the same + * place where register contents on machine checks would be saved. + * To avoid register corruption disable machine checks. + * We must also disable machine checks in the new psw mask for + * program checks, since swsusp_arch_suspend() may generate program + * checks. Disabling machine checks for all other new psw masks is + * just paranoia. */ + local_mcck_disable(); + /* Disable lowcore protection */ + __ctl_clear_bit(0,28); + S390_lowcore.external_new_psw.mask &= ~PSW_MASK_MCHECK; + S390_lowcore.svc_new_psw.mask &= ~PSW_MASK_MCHECK; + S390_lowcore.io_new_psw.mask &= ~PSW_MASK_MCHECK; + S390_lowcore.program_new_psw.mask &= ~PSW_MASK_MCHECK; } -/* - * restore the contents of CPU registers - */ void restore_processor_state(void) { - /* implentation contained in the - * swsusp_arch_resume function - */ + S390_lowcore.external_new_psw.mask |= PSW_MASK_MCHECK; + S390_lowcore.svc_new_psw.mask |= PSW_MASK_MCHECK; + S390_lowcore.io_new_psw.mask |= PSW_MASK_MCHECK; + S390_lowcore.program_new_psw.mask |= PSW_MASK_MCHECK; + /* Enable lowcore protection */ + __ctl_set_bit(0,28); + local_mcck_enable(); } diff --git a/arch/s390/power/swsusp_asm64.S b/arch/s390/power/swsusp_asm64.S index e27bd31..b26df5c 100644 --- a/arch/s390/power/swsusp_asm64.S +++ b/arch/s390/power/swsusp_asm64.S @@ -32,11 +32,6 @@ swsusp_arch_suspend: /* Deactivate DAT */ stnsm __SF_EMPTY(%r15),0xfb - /* Switch off lowcore protection */ - stctg %c0,%c0,__SF_EMPTY(%r15) - ni __SF_EMPTY+4(%r15),0xef - lctlg %c0,%c0,__SF_EMPTY(%r15) - /* Store prefix register on stack */ stpx __SF_EMPTY(%r15) @@ -88,11 +83,6 @@ swsusp_arch_suspend: /* Save image */ brasl %r14,swsusp_save - /* Switch on lowcore protection */ - stctg %c0,%c0,__SF_EMPTY(%r15) - oi __SF_EMPTY+4(%r15),0x10 - lctlg %c0,%c0,__SF_EMPTY(%r15) - /* Restore prefix register and return */ lghi %r1,0x1000 spx 0x318(%r1) @@ -120,11 +110,6 @@ swsusp_arch_resume: /* Deactivate DAT */ stnsm __SF_EMPTY(%r15),0xfb - /* Switch off lowcore protection */ - stctg %c0,%c0,__SF_EMPTY(%r15) - ni __SF_EMPTY+4(%r15),0xef - lctlg %c0,%c0,__SF_EMPTY(%r15) - /* Set prefix page to zero */ xc __SF_EMPTY(4,%r15),__SF_EMPTY(%r15) spx __SF_EMPTY(%r15) @@ -178,7 +163,7 @@ swsusp_arch_resume: /* Load old stack */ lg %r15,0x2f8(%r13) - /* Pointer to save arae */ + /* Pointer to save area */ lghi %r13,0x1000 #ifdef CONFIG_SMP @@ -190,11 +175,6 @@ swsusp_arch_resume: /* Restore prefix register */ spx 0x318(%r13) - /* Switch on lowcore protection */ - stctg %c0,%c0,__SF_EMPTY(%r15) - oi __SF_EMPTY+4(%r15),0x10 - lctlg %c0,%c0,__SF_EMPTY(%r15) - /* Activate DAT */ stosm __SF_EMPTY(%r15),0x04 -- cgit v1.1 From 3a6ba4600d6fb913ddb0dd08843ad75405795883 Mon Sep 17 00:00:00 2001 From: Heiko Carstens <heiko.carstens@de.ibm.com> Date: Fri, 24 Jul 2009 12:39:51 +0200 Subject: [S390] vdso: fix per cpu area allocation vdso per cpu area allocation in smp_prepare_cpus() happens with GFP_KERNEL but irqs disabled. Triggers this one: Badness at kernel/lockdep.c:2280 Modules linked in: CPU: 0 Not tainted 2.6.30 #2 Process swapper (pid: 1, task: 000000003fe88000, ksp: 000000003fe87eb8) Krnl PSW : 0400c00180000000 0000000000083360 (lockdep_trace_alloc+0xec/0xf8) [...] Call Trace: ([<00000000000832b6>] lockdep_trace_alloc+0x42/0xf8) [<00000000000b1880>] __alloc_pages_internal+0x3e8/0x5c4 [<00000000000b1b4a>] __get_free_pages+0x3a/0xb0 [<0000000000026546>] vdso_alloc_per_cpu+0x6a/0x18c [<00000000005eff82>] smp_prepare_cpus+0x322/0x594 [<00000000005e8232>] kernel_init+0x76/0x398 [<000000000001bb1e>] kernel_thread_starter+0x6/0xc [<000000000001bb18>] kernel_thread_starter+0x0/0xc Fix this by moving the allocation out of the irqs disabled section. Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> --- arch/s390/kernel/smp.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index 2270730..be2cae0 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -687,13 +687,14 @@ void __init smp_prepare_cpus(unsigned int max_cpus) #ifndef CONFIG_64BIT if (MACHINE_HAS_IEEE) lowcore->extended_save_area_addr = (u32) save_area; -#else - if (vdso_alloc_per_cpu(smp_processor_id(), lowcore)) - BUG(); #endif set_prefix((u32)(unsigned long) lowcore); local_mcck_enable(); local_irq_enable(); +#ifdef CONFIG_64BIT + if (vdso_alloc_per_cpu(smp_processor_id(), &S390_lowcore)) + BUG(); +#endif for_each_possible_cpu(cpu) if (cpu != smp_processor_id()) smp_create_idle(cpu); -- cgit v1.1 From 1277580fe5dfb5aef84854bdb7983657df00b920 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky <schwidefsky@de.ibm.com> Date: Fri, 24 Jul 2009 12:39:52 +0200 Subject: [S390] vdso: clock_gettime of CLOCK_THREAD_CPUTIME_ID with noexec=on The combination of noexec=on and a clock_gettime call with clock id CLOCK_THREAD_CPUTIME_ID is broken. The vdso code switches to the access register mode to get access to the per-cpu data structure to execute the magic ectg instruction. After the ectg instruction the code always switches back to the primary mode but for noexec=on the correct mode is the secondary mode. The effect of the bug is that the user space program looses the access to all mappings without PROT_EXEC, e.g. the stack. The problem is fixed by restoring the mode that has been active before the switch to the access register mode. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> --- arch/s390/kernel/vdso64/clock_gettime.S | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/s390/kernel/vdso64/clock_gettime.S b/arch/s390/kernel/vdso64/clock_gettime.S index 79dbfee..49106c6 100644 --- a/arch/s390/kernel/vdso64/clock_gettime.S +++ b/arch/s390/kernel/vdso64/clock_gettime.S @@ -88,10 +88,17 @@ __kernel_clock_gettime: llilh %r4,0x0100 sar %a4,%r4 lghi %r4,0 + epsw %r5,0 sacf 512 /* Magic ectg instruction */ .insn ssf,0xc80100000000,__VDSO_ECTG_BASE(4),__VDSO_ECTG_USER(4),4 - sacf 0 - sar %a4,%r2 + tml %r5,0x4000 + jo 11f + tml %r5,0x8000 + jno 10f + sacf 256 + j 11f +10: sacf 0 +11: sar %a4,%r2 algr %r1,%r0 /* r1 = cputime as TOD value */ mghi %r1,1000 /* convert to nanoseconds */ srlg %r1,%r1,12 /* r1 = cputime in nanosec */ -- cgit v1.1 From 58cda884ecc87dcce18d463b0c8bd928dae63ad8 Mon Sep 17 00:00:00 2001 From: Jean Pihet <jpihet@mvista.com> Date: Fri, 24 Jul 2009 19:43:25 -0600 Subject: OMAP3 SDRC: add support for 2 SDRAM chip selects Some OMAP3 boards (Beagle Cx, Overo, RX51, Pandora) have 2 SDRAM parts connected to the SDRC. This patch adds the following: - add a new argument of type omap_sdrc_params struct* to omap2_init_common_hw and omap2_sdrc_init for the 2nd CS params - adapted the OMAP boards files to the new prototype of omap2_init_common_hw - add the SDRC 2nd CS registers offsets defines - adapt the sram sleep code to configure the SDRC for the 2nd CS Note: If the 2nd param to omap2_init_common_hw is NULL, then the parameters are not programmed into the SDRC CS1 registers Tested on 3430 SDP and Beagleboard rev C2 and B5, with suspend/resume and frequency changes (cpufreq). Signed-off-by: Jean Pihet <jpihet@mvista.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> --- arch/arm/mach-omap2/board-2430sdp.c | 2 +- arch/arm/mach-omap2/board-3430sdp.c | 2 +- arch/arm/mach-omap2/board-4430sdp.c | 2 +- arch/arm/mach-omap2/board-apollon.c | 2 +- arch/arm/mach-omap2/board-generic.c | 2 +- arch/arm/mach-omap2/board-h4.c | 2 +- arch/arm/mach-omap2/board-ldp.c | 2 +- arch/arm/mach-omap2/board-omap3beagle.c | 3 +- arch/arm/mach-omap2/board-omap3evm.c | 2 +- arch/arm/mach-omap2/board-omap3pandora.c | 3 +- arch/arm/mach-omap2/board-overo.c | 3 +- arch/arm/mach-omap2/board-rx51.c | 2 +- arch/arm/mach-omap2/board-zoom2.c | 2 +- arch/arm/mach-omap2/clock34xx.c | 37 +++++++-- arch/arm/mach-omap2/io.c | 5 +- arch/arm/mach-omap2/sdrc.c | 63 +++++++++----- arch/arm/mach-omap2/sram34xx.S | 137 ++++++++++++++++++++++++------- arch/arm/plat-omap/include/mach/io.h | 3 +- arch/arm/plat-omap/include/mach/sdrc.h | 11 ++- arch/arm/plat-omap/include/mach/sram.h | 23 +++--- arch/arm/plat-omap/sram.c | 30 ++++--- 21 files changed, 236 insertions(+), 102 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 9c3fdcd..8ec2a13 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -141,7 +141,7 @@ static inline void board_smc91x_init(void) static void __init omap_2430sdp_init_irq(void) { - omap2_init_common_hw(NULL); + omap2_init_common_hw(NULL, NULL); omap_init_irq(); omap_gpio_init(); } diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 496a90e..ac262cd 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -169,7 +169,7 @@ static struct platform_device *sdp3430_devices[] __initdata = { static void __init omap_3430sdp_init_irq(void) { - omap2_init_common_hw(hyb18m512160af6_sdrc_params); + omap2_init_common_hw(hyb18m512160af6_sdrc_params, NULL); omap_init_irq(); omap_gpio_init(); } diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 57e477b..b0c7402 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -59,7 +59,7 @@ static void __init gic_init_irq(void) static void __init omap_4430sdp_init_irq(void) { - omap2_init_common_hw(NULL); + omap2_init_common_hw(NULL, NULL); #ifdef CONFIG_OMAP_32K_TIMER omap2_gp_clockevent_set_gptimer(1); #endif diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index 06dfba8..dcfc20d 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -250,7 +250,7 @@ out: static void __init omap_apollon_init_irq(void) { - omap2_init_common_hw(NULL); + omap2_init_common_hw(NULL, NULL); omap_init_irq(); omap_gpio_init(); apollon_init_smc91x(); diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 3492162..fd00aa0 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -33,7 +33,7 @@ static void __init omap_generic_init_irq(void) { - omap2_init_common_hw(NULL); + omap2_init_common_hw(NULL, NULL); omap_init_irq(); } diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index e7d017c..7b1d61d 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -270,7 +270,7 @@ static void __init h4_init_flash(void) static void __init omap_h4_init_irq(void) { - omap2_init_common_hw(NULL); + omap2_init_common_hw(NULL, NULL); omap_init_irq(); omap_gpio_init(); h4_init_flash(); diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index d8bc0a7..ea383f8 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -270,7 +270,7 @@ static inline void __init ldp_init_smsc911x(void) static void __init omap_ldp_init_irq(void) { - omap2_init_common_hw(NULL); + omap2_init_common_hw(NULL, NULL); omap_init_irq(); omap_gpio_init(); ldp_init_smsc911x(); diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 991ac9c..4abefd9 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -282,7 +282,8 @@ static int __init omap3_beagle_i2c_init(void) static void __init omap3_beagle_init_irq(void) { - omap2_init_common_hw(mt46h32m32lf6_sdrc_params); + omap2_init_common_hw(mt46h32m32lf6_sdrc_params, + mt46h32m32lf6_sdrc_params); omap_init_irq(); #ifdef CONFIG_OMAP_32K_TIMER omap2_gp_clockevent_set_gptimer(12); diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index d3cc145..217e5a2 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -279,7 +279,7 @@ struct spi_board_info omap3evm_spi_board_info[] = { static void __init omap3_evm_init_irq(void) { - omap2_init_common_hw(mt46h32m32lf6_sdrc_params); + omap2_init_common_hw(mt46h32m32lf6_sdrc_params, NULL); omap_init_irq(); omap_gpio_init(); omap3evm_init_smc911x(); diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index e32aa23..9b991ce 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -310,7 +310,8 @@ static int __init omap3pandora_i2c_init(void) static void __init omap3pandora_init_irq(void) { - omap2_init_common_hw(mt46h32m32lf6_sdrc_params); + omap2_init_common_hw(mt46h32m32lf6_sdrc_params, + mt46h32m32lf6_sdrc_params); omap_init_irq(); omap_gpio_init(); } diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index dff5528..44bc1c5 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -360,7 +360,8 @@ static int __init overo_i2c_init(void) static void __init overo_init_irq(void) { - omap2_init_common_hw(mt46h32m32lf6_sdrc_params); + omap2_init_common_hw(mt46h32m32lf6_sdrc_params, + mt46h32m32lf6_sdrc_params); omap_init_irq(); omap_gpio_init(); } diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index 374ff63..591ae8a 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -61,7 +61,7 @@ static struct omap_board_config_kernel rx51_config[] = { static void __init rx51_init_irq(void) { - omap2_init_common_hw(NULL); + omap2_init_common_hw(NULL, NULL); omap_init_irq(); omap_gpio_init(); } diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c index bcc0f76..427b7b8 100644 --- a/arch/arm/mach-omap2/board-zoom2.c +++ b/arch/arm/mach-omap2/board-zoom2.c @@ -25,7 +25,7 @@ static void __init omap_zoom2_init_irq(void) { - omap2_init_common_hw(NULL); + omap2_init_common_hw(NULL, NULL); omap_init_irq(); omap_gpio_init(); } diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index 045da92..1c6480d 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -725,7 +725,9 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) u32 unlock_dll = 0; u32 c; unsigned long validrate, sdrcrate, mpurate; - struct omap_sdrc_params *sp; + struct omap_sdrc_params *sdrc_cs0; + struct omap_sdrc_params *sdrc_cs1; + int ret; if (!clk || !rate) return -EINVAL; @@ -743,8 +745,8 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) else sdrcrate >>= ((clk->rate / rate) >> 1); - sp = omap2_sdrc_get_params(sdrcrate); - if (!sp) + ret = omap2_sdrc_get_params(sdrcrate, &sdrc_cs0, &sdrc_cs1); + if (ret) return -EINVAL; if (sdrcrate < MIN_SDRC_DLL_LOCK_FREQ) { @@ -765,12 +767,29 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate, validrate); - pr_debug("clock: SDRC timing params used: %08x %08x %08x\n", - sp->rfr_ctrl, sp->actim_ctrla, sp->actim_ctrlb); - - omap3_configure_core_dpll(sp->rfr_ctrl, sp->actim_ctrla, - sp->actim_ctrlb, new_div, unlock_dll, c, - sp->mr, rate > clk->rate); + pr_debug("clock: SDRC CS0 timing params used:" + " RFR %08x CTRLA %08x CTRLB %08x MR %08x\n", + sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla, + sdrc_cs0->actim_ctrlb, sdrc_cs0->mr); + if (sdrc_cs1) + pr_debug("clock: SDRC CS1 timing params used: " + " RFR %08x CTRLA %08x CTRLB %08x MR %08x\n", + sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla, + sdrc_cs1->actim_ctrlb, sdrc_cs1->mr); + + if (sdrc_cs1) + omap3_configure_core_dpll( + new_div, unlock_dll, c, rate > clk->rate, + sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla, + sdrc_cs0->actim_ctrlb, sdrc_cs0->mr, + sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla, + sdrc_cs1->actim_ctrlb, sdrc_cs1->mr); + else + omap3_configure_core_dpll( + new_div, unlock_dll, c, rate > clk->rate, + sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla, + sdrc_cs0->actim_ctrlb, sdrc_cs0->mr, + 0, 0, 0, 0); return 0; } diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 3a86b0f..e9b9bcb 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -276,14 +276,15 @@ static int __init _omap2_init_reprogram_sdrc(void) return v; } -void __init omap2_init_common_hw(struct omap_sdrc_params *sp) +void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0, + struct omap_sdrc_params *sdrc_cs1) { omap2_mux_init(); #ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once the clkdev is ready */ pwrdm_init(powerdomains_omap); clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps); omap2_clk_init(); - omap2_sdrc_init(sp); + omap2_sdrc_init(sdrc_cs0, sdrc_cs1); _omap2_init_reprogram_sdrc(); #endif gpmc_init(); diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c index 2045441..2e9e38d 100644 --- a/arch/arm/mach-omap2/sdrc.c +++ b/arch/arm/mach-omap2/sdrc.c @@ -32,7 +32,7 @@ #include <mach/sdrc.h> #include "sdrc.h" -static struct omap_sdrc_params *sdrc_init_params; +static struct omap_sdrc_params *sdrc_init_params_cs0, *sdrc_init_params_cs1; void __iomem *omap2_sdrc_base; void __iomem *omap2_sms_base; @@ -45,33 +45,49 @@ void __iomem *omap2_sms_base; /** * omap2_sdrc_get_params - return SDRC register values for a given clock rate * @r: SDRC clock rate (in Hz) + * @sdrc_cs0: chip select 0 ram timings ** + * @sdrc_cs1: chip select 1 ram timings ** * * Return pre-calculated values for the SDRC_ACTIM_CTRLA, - * SDRC_ACTIM_CTRLB, SDRC_RFR_CTRL, and SDRC_MR registers, for a given - * SDRC clock rate 'r'. These parameters control various timing - * delays in the SDRAM controller that are expressed in terms of the - * number of SDRC clock cycles to wait; hence the clock rate - * dependency. Note that sdrc_init_params must be sorted rate - * descending. Also assumes that both chip-selects use the same - * timing parameters. Returns a struct omap_sdrc_params * upon - * success, or NULL upon failure. + * SDRC_ACTIM_CTRLB, SDRC_RFR_CTRL and SDRC_MR registers in sdrc_cs[01] + * structs,for a given SDRC clock rate 'r'. + * These parameters control various timing delays in the SDRAM controller + * that are expressed in terms of the number of SDRC clock cycles to + * wait; hence the clock rate dependency. + * + * Supports 2 different timing parameters for both chip selects. + * + * Note 1: the sdrc_init_params_cs[01] must be sorted rate descending. + * Note 2: If sdrc_init_params_cs_1 is not NULL it must be of same size + * as sdrc_init_params_cs_0. + * + * Fills in the struct omap_sdrc_params * for each chip select. + * Returns 0 upon success or -1 upon failure. */ -struct omap_sdrc_params *omap2_sdrc_get_params(unsigned long r) +int omap2_sdrc_get_params(unsigned long r, + struct omap_sdrc_params **sdrc_cs0, + struct omap_sdrc_params **sdrc_cs1) { - struct omap_sdrc_params *sp; + struct omap_sdrc_params *sp0, *sp1; - if (!sdrc_init_params) - return NULL; + if (!sdrc_init_params_cs0) + return -1; - sp = sdrc_init_params; + sp0 = sdrc_init_params_cs0; + sp1 = sdrc_init_params_cs1; - while (sp->rate && sp->rate != r) - sp++; + while (sp0->rate && sp0->rate != r) { + sp0++; + if (sdrc_init_params_cs1) + sp1++; + } - if (!sp->rate) - return NULL; + if (!sp0->rate) + return -1; - return sp; + *sdrc_cs0 = sp0; + *sdrc_cs1 = sp1; + return 0; } @@ -83,13 +99,15 @@ void __init omap2_set_globals_sdrc(struct omap_globals *omap2_globals) /** * omap2_sdrc_init - initialize SMS, SDRC devices on boot - * @sp: pointer to a null-terminated list of struct omap_sdrc_params + * @sdrc_cs[01]: pointers to a null-terminated list of struct omap_sdrc_params + * Support for 2 chip selects timings * * Turn on smart idle modes for SDRAM scheduler and controller. * Program a known-good configuration for the SDRC to deal with buggy * bootloaders. */ -void __init omap2_sdrc_init(struct omap_sdrc_params *sp) +void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0, + struct omap_sdrc_params *sdrc_cs1) { u32 l; @@ -103,7 +121,8 @@ void __init omap2_sdrc_init(struct omap_sdrc_params *sp) l |= (0x2 << 3); sdrc_write_reg(l, SDRC_SYSCONFIG); - sdrc_init_params = sp; + sdrc_init_params_cs0 = sdrc_cs0; + sdrc_init_params_cs1 = sdrc_cs1; /* XXX Enable SRFRONIDLEREQ here also? */ l = (1 << SDRC_POWER_EXTCLKDIS_SHIFT) | diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S index f41f8d9..3aef744 100644 --- a/arch/arm/mach-omap2/sram34xx.S +++ b/arch/arm/mach-omap2/sram34xx.S @@ -36,7 +36,7 @@ .text -/* r4 parameters */ +/* r1 parameters */ #define SDRC_NO_UNLOCK_DLL 0x0 #define SDRC_UNLOCK_DLL 0x1 @@ -71,40 +71,71 @@ /* * omap3_sram_configure_core_dpll - change DPLL3 M2 divider - * r0 = new SDRC_RFR_CTRL register contents - * r1 = new SDRC_ACTIM_CTRLA register contents - * r2 = new SDRC_ACTIM_CTRLB register contents - * r3 = new M2 divider setting (only 1 and 2 supported right now) - * r4 = unlock SDRC DLL? (1 = yes, 0 = no). Only unlock DLL for + * + * Params passed in registers: + * r0 = new M2 divider setting (only 1 and 2 supported right now) + * r1 = unlock SDRC DLL? (1 = yes, 0 = no). Only unlock DLL for * SDRC rates < 83MHz - * r5 = number of MPU cycles to wait for SDRC to stabilize after + * r2 = number of MPU cycles to wait for SDRC to stabilize after * reprogramming the SDRC when switching to a slower MPU speed - * r6 = new SDRC_MR_0 register value - * r7 = increasing SDRC rate? (1 = yes, 0 = no) + * r3 = increasing SDRC rate? (1 = yes, 0 = no) + * + * Params passed via the stack. The needed params will be copied in SRAM + * before use by the code in SRAM (SDRAM is not accessible during SDRC + * reconfiguration): + * new SDRC_RFR_CTRL_0 register contents + * new SDRC_ACTIM_CTRL_A_0 register contents + * new SDRC_ACTIM_CTRL_B_0 register contents + * new SDRC_MR_0 register value + * new SDRC_RFR_CTRL_1 register contents + * new SDRC_ACTIM_CTRL_A_1 register contents + * new SDRC_ACTIM_CTRL_B_1 register contents + * new SDRC_MR_1 register value * + * If the param SDRC_RFR_CTRL_1 is 0, the parameters + * are not programmed into the SDRC CS1 registers */ ENTRY(omap3_sram_configure_core_dpll) stmfd sp!, {r1-r12, lr} @ store regs to stack - ldr r4, [sp, #52] @ pull extra args off the stack - ldr r5, [sp, #56] @ load extra args from the stack - ldr r6, [sp, #60] @ load extra args from the stack - ldr r7, [sp, #64] @ load extra args from the stack + + @ pull the extra args off the stack + @ and store them in SRAM + ldr r4, [sp, #52] + str r4, omap_sdrc_rfr_ctrl_0_val + ldr r4, [sp, #56] + str r4, omap_sdrc_actim_ctrl_a_0_val + ldr r4, [sp, #60] + str r4, omap_sdrc_actim_ctrl_b_0_val + ldr r4, [sp, #64] + str r4, omap_sdrc_mr_0_val + ldr r4, [sp, #68] + str r4, omap_sdrc_rfr_ctrl_1_val + cmp r4, #0 @ if SDRC_RFR_CTRL_1 is 0, + beq skip_cs1_params @ do not use cs1 params + ldr r4, [sp, #72] + str r4, omap_sdrc_actim_ctrl_a_1_val + ldr r4, [sp, #76] + str r4, omap_sdrc_actim_ctrl_b_1_val + ldr r4, [sp, #80] + str r4, omap_sdrc_mr_1_val +skip_cs1_params: dsb @ flush buffered writes to interconnect - cmp r7, #1 @ if increasing SDRC clk rate, + + cmp r3, #1 @ if increasing SDRC clk rate, bleq configure_sdrc @ program the SDRC regs early (for RFR) - cmp r4, #SDRC_UNLOCK_DLL @ set the intended DLL state + cmp r1, #SDRC_UNLOCK_DLL @ set the intended DLL state bleq unlock_dll blne lock_dll bl sdram_in_selfrefresh @ put SDRAM in self refresh, idle SDRC bl configure_core_dpll @ change the DPLL3 M2 divider bl enable_sdrc @ take SDRC out of idle - cmp r4, #SDRC_UNLOCK_DLL @ wait for DLL status to change + cmp r1, #SDRC_UNLOCK_DLL @ wait for DLL status to change bleq wait_dll_unlock blne wait_dll_lock - cmp r7, #1 @ if increasing SDRC clk rate, + cmp r3, #1 @ if increasing SDRC clk rate, beq return_to_sdram @ return to SDRAM code, otherwise, bl configure_sdrc @ reprogram SDRC regs now - mov r12, r5 + mov r12, r2 bl wait_clk_stable @ wait for SDRC to stabilize return_to_sdram: isb @ prevent speculative exec past here @@ -149,7 +180,7 @@ configure_core_dpll: ldr r12, [r11] ldr r10, core_m2_mask_val @ modify m2 for core dpll and r12, r12, r10 - orr r12, r12, r3, lsl #CORE_DPLL_CLKOUT_DIV_SHIFT + orr r12, r12, r0, lsl #CORE_DPLL_CLKOUT_DIV_SHIFT str r12, [r11] ldr r12, [r11] @ posted-write barrier for CM bx lr @@ -187,15 +218,34 @@ wait_dll_unlock: bne wait_dll_unlock bx lr configure_sdrc: - ldr r11, omap3_sdrc_rfr_ctrl - str r0, [r11] - ldr r11, omap3_sdrc_actim_ctrla - str r1, [r11] - ldr r11, omap3_sdrc_actim_ctrlb - str r2, [r11] + ldr r12, omap_sdrc_rfr_ctrl_0_val @ fetch value from SRAM + ldr r11, omap3_sdrc_rfr_ctrl_0 @ fetch addr from SRAM + str r12, [r11] @ store + ldr r12, omap_sdrc_actim_ctrl_a_0_val + ldr r11, omap3_sdrc_actim_ctrl_a_0 + str r12, [r11] + ldr r12, omap_sdrc_actim_ctrl_b_0_val + ldr r11, omap3_sdrc_actim_ctrl_b_0 + str r12, [r11] + ldr r12, omap_sdrc_mr_0_val ldr r11, omap3_sdrc_mr_0 - str r6, [r11] - ldr r6, [r11] @ posted-write barrier for SDRC + str r12, [r11] + ldr r12, omap_sdrc_rfr_ctrl_1_val + cmp r12, #0 @ if SDRC_RFR_CTRL_1 is 0, + beq skip_cs1_prog @ do not program cs1 params + ldr r11, omap3_sdrc_rfr_ctrl_1 + str r12, [r11] + ldr r12, omap_sdrc_actim_ctrl_a_1_val + ldr r11, omap3_sdrc_actim_ctrl_a_1 + str r12, [r11] + ldr r12, omap_sdrc_actim_ctrl_b_1_val + ldr r11, omap3_sdrc_actim_ctrl_b_1 + str r12, [r11] + ldr r12, omap_sdrc_mr_1_val + ldr r11, omap3_sdrc_mr_1 + str r12, [r11] +skip_cs1_prog: + ldr r12, [r11] @ posted-write barrier for SDRC bx lr omap3_sdrc_power: @@ -206,14 +256,40 @@ omap3_cm_idlest1_core: .word OMAP34XX_CM_REGADDR(CORE_MOD, CM_IDLEST) omap3_cm_iclken1_core: .word OMAP34XX_CM_REGADDR(CORE_MOD, CM_ICLKEN1) -omap3_sdrc_rfr_ctrl: + +omap3_sdrc_rfr_ctrl_0: .word OMAP34XX_SDRC_REGADDR(SDRC_RFR_CTRL_0) -omap3_sdrc_actim_ctrla: +omap3_sdrc_rfr_ctrl_1: + .word OMAP34XX_SDRC_REGADDR(SDRC_RFR_CTRL_1) +omap3_sdrc_actim_ctrl_a_0: .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_0) -omap3_sdrc_actim_ctrlb: +omap3_sdrc_actim_ctrl_a_1: + .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_1) +omap3_sdrc_actim_ctrl_b_0: .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_0) +omap3_sdrc_actim_ctrl_b_1: + .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_1) omap3_sdrc_mr_0: .word OMAP34XX_SDRC_REGADDR(SDRC_MR_0) +omap3_sdrc_mr_1: + .word OMAP34XX_SDRC_REGADDR(SDRC_MR_1) +omap_sdrc_rfr_ctrl_0_val: + .word 0xDEADBEEF +omap_sdrc_rfr_ctrl_1_val: + .word 0xDEADBEEF +omap_sdrc_actim_ctrl_a_0_val: + .word 0xDEADBEEF +omap_sdrc_actim_ctrl_a_1_val: + .word 0xDEADBEEF +omap_sdrc_actim_ctrl_b_0_val: + .word 0xDEADBEEF +omap_sdrc_actim_ctrl_b_1_val: + .word 0xDEADBEEF +omap_sdrc_mr_0_val: + .word 0xDEADBEEF +omap_sdrc_mr_1_val: + .word 0xDEADBEEF + omap3_sdrc_dlla_status: .word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS) omap3_sdrc_dlla_ctrl: @@ -223,3 +299,4 @@ core_m2_mask_val: ENTRY(omap3_sram_configure_core_dpll_sz) .word . - omap3_sram_configure_core_dpll + diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h index 73f483d..21fb0ef 100644 --- a/arch/arm/plat-omap/include/mach/io.h +++ b/arch/arm/plat-omap/include/mach/io.h @@ -228,7 +228,8 @@ extern void omap1_map_common_io(void); extern void omap1_init_common_hw(void); extern void omap2_map_common_io(void); -extern void omap2_init_common_hw(struct omap_sdrc_params *sp); +extern void omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0, + struct omap_sdrc_params *sdrc_cs1); #define __arch_ioremap(p,s,t) omap_ioremap(p,s,t) #define __arch_iounmap(v) omap_iounmap(v) diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/mach/sdrc.h index adc7352..0be18e4 100644 --- a/arch/arm/plat-omap/include/mach/sdrc.h +++ b/arch/arm/plat-omap/include/mach/sdrc.h @@ -30,6 +30,10 @@ #define SDRC_ACTIM_CTRL_A_0 0x09c #define SDRC_ACTIM_CTRL_B_0 0x0a0 #define SDRC_RFR_CTRL_0 0x0a4 +#define SDRC_MR_1 0x0B4 +#define SDRC_ACTIM_CTRL_A_1 0x0C4 +#define SDRC_ACTIM_CTRL_B_1 0x0C8 +#define SDRC_RFR_CTRL_1 0x0D4 /* * These values represent the number of memory clock cycles between @@ -102,8 +106,11 @@ struct omap_sdrc_params { u32 mr; }; -void __init omap2_sdrc_init(struct omap_sdrc_params *sp); -struct omap_sdrc_params *omap2_sdrc_get_params(unsigned long r); +void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0, + struct omap_sdrc_params *sdrc_cs1); +int omap2_sdrc_get_params(unsigned long r, + struct omap_sdrc_params **sdrc_cs0, + struct omap_sdrc_params **sdrc_cs1); #ifdef CONFIG_ARCH_OMAP2 diff --git a/arch/arm/plat-omap/include/mach/sram.h b/arch/arm/plat-omap/include/mach/sram.h index 4d53cc5..8974e3f 100644 --- a/arch/arm/plat-omap/include/mach/sram.h +++ b/arch/arm/plat-omap/include/mach/sram.h @@ -21,11 +21,12 @@ extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type); extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass); -extern u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl, - u32 sdrc_actim_ctrla, - u32 sdrc_actim_ctrlb, u32 m2, - u32 unlock_dll, u32 f, u32 sdrc_mr, - u32 inc); +extern u32 omap3_configure_core_dpll( + u32 m2, u32 unlock_dll, u32 f, u32 inc, + u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, + u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, + u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, + u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); /* Do not use these */ extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl); @@ -59,12 +60,12 @@ extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type); extern unsigned long omap243x_sram_reprogram_sdrc_sz; - -extern u32 omap3_sram_configure_core_dpll(u32 sdrc_rfr_ctrl, - u32 sdrc_actim_ctrla, - u32 sdrc_actim_ctrlb, u32 m2, - u32 unlock_dll, u32 f, u32 sdrc_mr, - u32 inc); +extern u32 omap3_sram_configure_core_dpll( + u32 m2, u32 unlock_dll, u32 f, u32 inc, + u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, + u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, + u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, + u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); extern unsigned long omap3_sram_configure_core_dpll_sz; #endif diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 4ea7380..4e781c9 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -373,20 +373,26 @@ static inline int omap243x_sram_init(void) #ifdef CONFIG_ARCH_OMAP3 -static u32 (*_omap3_sram_configure_core_dpll)(u32 sdrc_rfr_ctrl, - u32 sdrc_actim_ctrla, - u32 sdrc_actim_ctrlb, - u32 m2, u32 unlock_dll, - u32 f, u32 sdrc_mr, u32 inc); -u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl, u32 sdrc_actim_ctrla, - u32 sdrc_actim_ctrlb, u32 m2, u32 unlock_dll, - u32 f, u32 sdrc_mr, u32 inc) +static u32 (*_omap3_sram_configure_core_dpll)( + u32 m2, u32 unlock_dll, u32 f, u32 inc, + u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, + u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, + u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, + u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); + +u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc, + u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, + u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, + u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, + u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1) { BUG_ON(!_omap3_sram_configure_core_dpll); - return _omap3_sram_configure_core_dpll(sdrc_rfr_ctrl, - sdrc_actim_ctrla, - sdrc_actim_ctrlb, m2, - unlock_dll, f, sdrc_mr, inc); + return _omap3_sram_configure_core_dpll( + m2, unlock_dll, f, inc, + sdrc_rfr_ctrl_0, sdrc_actim_ctrl_a_0, + sdrc_actim_ctrl_b_0, sdrc_mr_0, + sdrc_rfr_ctrl_1, sdrc_actim_ctrl_a_1, + sdrc_actim_ctrl_b_1, sdrc_mr_1); } /* REVISIT: Should this be same as omap34xx_sram_init() after off-idle? */ -- cgit v1.1 From 9fb97412c3be5d0d1dd0e9d7c5268469e4c942aa Mon Sep 17 00:00:00 2001 From: Jean Pihet <jpihet@mvista.com> Date: Fri, 24 Jul 2009 19:43:25 -0600 Subject: OMAP3: Setup MUX settings for SDRC CKE signals This patches ensures the MUX settings are correct for the SDRC CKE signals to SDRAM. This allows the self-refresh to work when 2 chip-selects are in use. A warning is thrown away in case the initial muxing is incorrect, in order to track faulty or old-dated bootloaders. Note: The CONFIG_OMAP_MUX and CONFIG_OMAP_MUX_WARNINGS options must be enabled for the mux code to have effect. Signed-off-by: Jean Pihet <jpihet@mvista.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> --- arch/arm/mach-omap2/board-omap3beagle.c | 4 ++++ arch/arm/mach-omap2/board-omap3pandora.c | 5 +++++ arch/arm/mach-omap2/board-overo.c | 5 +++++ arch/arm/mach-omap2/board-rx51.c | 4 ++++ arch/arm/mach-omap2/mux.c | 6 ++++++ arch/arm/plat-omap/include/mach/mux.h | 4 ++++ 6 files changed, 28 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 4abefd9..e00ba12 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -409,6 +409,10 @@ static void __init omap3_beagle_init(void) usb_musb_init(); omap3beagle_flash_init(); + + /* Ensure SDRC pins are mux'd for self-refresh */ + omap_cfg_reg(H16_34XX_SDRC_CKE0); + omap_cfg_reg(H17_34XX_SDRC_CKE1); } static void __init omap3_beagle_map_io(void) diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 9b991ce..864ee3d 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -40,6 +40,7 @@ #include <mach/mcspi.h> #include <mach/usb.h> #include <mach/keypad.h> +#include <mach/mux.h> #include "sdram-micron-mt46h32m32lf-6.h" #include "mmc-twl4030.h" @@ -398,6 +399,10 @@ static void __init omap3pandora_init(void) omap3pandora_ads7846_init(); pandora_keys_gpio_init(); usb_musb_init(); + + /* Ensure SDRC pins are mux'd for self-refresh */ + omap_cfg_reg(H16_34XX_SDRC_CKE0); + omap_cfg_reg(H17_34XX_SDRC_CKE1); } static void __init omap3pandora_map_io(void) diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 44bc1c5..6b171b3 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -44,6 +44,7 @@ #include <mach/gpmc.h> #include <mach/hardware.h> #include <mach/nand.h> +#include <mach/mux.h> #include <mach/usb.h> #include "sdram-micron-mt46h32m32lf-6.h" @@ -396,6 +397,10 @@ static void __init overo_init(void) overo_ads7846_init(); overo_init_smsc911x(); + /* Ensure SDRC pins are mux'd for self-refresh */ + omap_cfg_reg(H16_34XX_SDRC_CKE0); + omap_cfg_reg(H17_34XX_SDRC_CKE1); + if ((gpio_request(OVERO_GPIO_W2W_NRESET, "OVERO_GPIO_W2W_NRESET") == 0) && (gpio_direction_output(OVERO_GPIO_W2W_NRESET, 1) == 0)) { diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index 591ae8a..1c9e07f 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -75,6 +75,10 @@ static void __init rx51_init(void) omap_serial_init(); usb_musb_init(); rx51_peripherals_init(); + + /* Ensure SDRC pins are mux'd for self-refresh */ + omap_cfg_reg(H16_34XX_SDRC_CKE0); + omap_cfg_reg(H17_34XX_SDRC_CKE1); } static void __init rx51_map_io(void) diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 026c4fc..43d6b92 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -486,6 +486,12 @@ MUX_CFG_34XX("H19_34XX_GPIO164_OUT", 0x19c, OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) MUX_CFG_34XX("J25_34XX_GPIO170", 0x1c6, OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) + +/* OMAP3 SDRC CKE signals to SDR/DDR ram chips */ +MUX_CFG_34XX("H16_34XX_SDRC_CKE0", 0x262, + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT) +MUX_CFG_34XX("H17_34XX_SDRC_CKE1", 0x264, + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT) }; #define OMAP34XX_PINS_SZ ARRAY_SIZE(omap34xx_pins) diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h index 85a6217..80281c4 100644 --- a/arch/arm/plat-omap/include/mach/mux.h +++ b/arch/arm/plat-omap/include/mach/mux.h @@ -853,6 +853,10 @@ enum omap34xx_index { AE5_34XX_GPIO143, H19_34XX_GPIO164_OUT, J25_34XX_GPIO170, + + /* OMAP3 SDRC CKE signals to SDR/DDR ram chips */ + H16_34XX_SDRC_CKE0, + H17_34XX_SDRC_CKE1, }; struct omap_mux_cfg { -- cgit v1.1 From 75f251e3d0803b028f3474fdc75be0994c377ab5 Mon Sep 17 00:00:00 2001 From: Paul Walmsley <paul@pwsan.com> Date: Fri, 24 Jul 2009 19:44:01 -0600 Subject: OMAP2/3 SDRC: don't set SDRC_POWER.PWDENA on boot Stop setting SDRC_POWER.PWDENA on boot. There is a nasty erratum (34xx erratum 1.150) that can cause memory corruption if PWDENA is enabled. Based originally on a patch from Samu P. Onkalo <samu.p.onkalo@nokia.com>. Tested on BeagleBoard rev C2. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Samu P. Onkalo <samu.p.onkalo@nokia.com> --- arch/arm/mach-omap2/sdrc.c | 5 ++++- arch/arm/mach-omap2/sram34xx.S | 2 -- 2 files changed, 4 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c index 2e9e38d..9e3bd4f 100644 --- a/arch/arm/mach-omap2/sdrc.c +++ b/arch/arm/mach-omap2/sdrc.c @@ -125,8 +125,11 @@ void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0, sdrc_init_params_cs1 = sdrc_cs1; /* XXX Enable SRFRONIDLEREQ here also? */ + /* + * PWDENA should not be set due to 34xx erratum 1.150 - PWDENA + * can cause random memory corruption + */ l = (1 << SDRC_POWER_EXTCLKDIS_SHIFT) | - (1 << SDRC_POWER_PWDENA_SHIFT) | (1 << SDRC_POWER_PAGEPOLICY_SHIFT); sdrc_write_reg(l, SDRC_POWER); } diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S index 3aef744..9c2d046 100644 --- a/arch/arm/mach-omap2/sram34xx.S +++ b/arch/arm/mach-omap2/sram34xx.S @@ -58,7 +58,6 @@ /* SDRC_POWER bit settings */ #define SRFRONIDLEREQ_MASK 0x40 -#define PWDENA_MASK 0x4 /* CM_IDLEST1_CORE bit settings */ #define ST_SDRC_MASK 0x2 @@ -160,7 +159,6 @@ sdram_in_selfrefresh: ldr r12, [r11] @ read the contents of SDRC_POWER mov r9, r12 @ keep a copy of SDRC_POWER bits orr r12, r12, #SRFRONIDLEREQ_MASK @ enable self refresh on idle - bic r12, r12, #PWDENA_MASK @ clear PWDENA str r12, [r11] @ write back to SDRC_POWER register ldr r12, [r11] @ posted-write barrier for SDRC idle_sdrc: -- cgit v1.1 From 8ff120e5303e27e03aba7b774e86fd43eaf90376 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak <rnayak@ti.com> Date: Fri, 24 Jul 2009 19:44:01 -0600 Subject: OMAP3 SDRC: Fix freeze when scaling CORE dpll to < 83Mhz This patch fixes a bug in the CORE dpll scaling sequence which was errouneously clearing some bits in the SDRC DLLA CTRL register and hence causing a freeze. The issue was observed only on platforms which scale CORE dpll to < 83Mhz and hence program the DLL in fixed delay mode. Issue reported by Limei Wang <E12499@motorola.com>, with debugging assistance from Richard Woodruff <r-woodruff2@ti.com> and Girish Ghongdemath <girishsg@ti.com>. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Cc: Limei Wang <E12499@motorola.com> Cc: Richard Woodruff <r-woodruff2@ti.com> Cc: Girish Ghongdemath <girishsg@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> [paul@pwsan.com: updated patch description to include collaboration credits] --- arch/arm/mach-omap2/sram34xx.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S index 9c2d046..e6b1125 100644 --- a/arch/arm/mach-omap2/sram34xx.S +++ b/arch/arm/mach-omap2/sram34xx.S @@ -143,7 +143,7 @@ return_to_sdram: unlock_dll: ldr r11, omap3_sdrc_dlla_ctrl ldr r12, [r11] - and r12, r12, #FIXEDDELAY_MASK + bic r12, r12, #FIXEDDELAY_MASK orr r12, r12, #FIXEDDELAY_DEFAULT orr r12, r12, #DLLIDLE_MASK str r12, [r11] @ (no OCP barrier needed) -- cgit v1.1 From df56556e571234cf26072cd58c01ac3520986b44 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak <rnayak@ti.com> Date: Fri, 24 Jul 2009 19:44:02 -0600 Subject: OMAP3 SDRC: Move the clk stabilization delay to the right place The clock stabilization delay post a M2 divider change is needed even before a SDRC interface clock re-enable and not only before jumping back to SDRAM. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> --- arch/arm/mach-omap2/sram34xx.S | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S index e6b1125..82aa4a3 100644 --- a/arch/arm/mach-omap2/sram34xx.S +++ b/arch/arm/mach-omap2/sram34xx.S @@ -127,6 +127,8 @@ skip_cs1_params: blne lock_dll bl sdram_in_selfrefresh @ put SDRAM in self refresh, idle SDRC bl configure_core_dpll @ change the DPLL3 M2 divider + mov r12, r2 + bl wait_clk_stable @ wait for SDRC to stabilize bl enable_sdrc @ take SDRC out of idle cmp r1, #SDRC_UNLOCK_DLL @ wait for DLL status to change bleq wait_dll_unlock @@ -134,8 +136,6 @@ skip_cs1_params: cmp r3, #1 @ if increasing SDRC clk rate, beq return_to_sdram @ return to SDRAM code, otherwise, bl configure_sdrc @ reprogram SDRC regs now - mov r12, r2 - bl wait_clk_stable @ wait for SDRC to stabilize return_to_sdram: isb @ prevent speculative exec past here mov r0, #0 @ return value -- cgit v1.1 From 72350b29a4c0debfc27c2edbeed9b4ff3f935dd4 Mon Sep 17 00:00:00 2001 From: Paul Walmsley <paul@pwsan.com> Date: Fri, 24 Jul 2009 19:44:03 -0600 Subject: OMAP2/3 clock: split, rename omap2_wait_clock_ready() Some OMAP2/3 hardware modules have CM_IDLEST attributes that are not handled by the current omap2_wait_clock_ready() code. In preparation for patches that fix the unusual devices, rename the function omap2_wait_clock_ready() to omap2_wait_module_ready() and split it into three parts: 1. A clkops-specific companion clock return function (by default, omap2_clk_dflt_find_companion()) 2. A clkops-specific CM_IDLEST register address and bit shift return function (by default, omap2_clk_dflt_find_idlest()) 3. Code to wait for the CM to indicate that the module is ready (omap2_cm_wait_idlest()) Clocks can now specify their own custom find_companion() and find_idlest() functions; used in subsequent patches. Signed-off-by: Paul Walmsley <paul@pwsan.com> --- arch/arm/mach-omap2/clock.c | 156 ++++++++++++++++---------------- arch/arm/mach-omap2/clock.h | 6 ++ arch/arm/mach-omap2/prcm.c | 43 +++++++++ arch/arm/plat-omap/include/mach/clock.h | 2 + arch/arm/plat-omap/include/mach/prcm.h | 1 + 5 files changed, 131 insertions(+), 77 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index b0665f1..456e2ad 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -27,6 +27,7 @@ #include <mach/clock.h> #include <mach/clockdomain.h> #include <mach/cpu.h> +#include <mach/prcm.h> #include <asm/div64.h> #include <mach/sdrc.h> @@ -38,8 +39,6 @@ #include "cm-regbits-24xx.h" #include "cm-regbits-34xx.h" -#define MAX_CLOCK_ENABLE_WAIT 100000 - /* DPLL rate rounding: minimum DPLL multiplier, divider values */ #define DPLL_MIN_MULTIPLIER 1 #define DPLL_MIN_DIVIDER 1 @@ -274,83 +273,97 @@ unsigned long omap2_fixed_divisor_recalc(struct clk *clk) } /** - * omap2_wait_clock_ready - wait for clock to enable - * @reg: physical address of clock IDLEST register - * @mask: value to mask against to determine if the clock is active - * @name: name of the clock (for printk) + * omap2_clk_dflt_find_companion - find companion clock to @clk + * @clk: struct clk * to find the companion clock of + * @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in + * @other_bit: u8 ** to return the companion clock bit shift in + * + * Note: We don't need special code here for INVERT_ENABLE for the + * time being since INVERT_ENABLE only applies to clocks enabled by + * CM_CLKEN_PLL * - * Returns 1 if the clock enabled in time, or 0 if it failed to enable - * in roughly MAX_CLOCK_ENABLE_WAIT microseconds. + * Convert CM_ICLKEN* <-> CM_FCLKEN*. This conversion assumes it's + * just a matter of XORing the bits. + * + * Some clocks don't have companion clocks. For example, modules with + * only an interface clock (such as MAILBOXES) don't have a companion + * clock. Right now, this code relies on the hardware exporting a bit + * in the correct companion register that indicates that the + * nonexistent 'companion clock' is active. Future patches will + * associate this type of code with per-module data structures to + * avoid this issue, and remove the casts. No return value. */ -int omap2_wait_clock_ready(void __iomem *reg, u32 mask, const char *name) +void omap2_clk_dflt_find_companion(struct clk *clk, void __iomem **other_reg, + u8 *other_bit) { - int i = 0; - int ena = 0; + u32 r; /* - * 24xx uses 0 to indicate not ready, and 1 to indicate ready. - * 34xx reverses this, just to keep us on our toes + * Convert CM_ICLKEN* <-> CM_FCLKEN*. This conversion assumes + * it's just a matter of XORing the bits. */ - if (cpu_mask & (RATE_IN_242X | RATE_IN_243X)) - ena = mask; - else if (cpu_mask & RATE_IN_343X) - ena = 0; - - /* Wait for lock */ - while (((__raw_readl(reg) & mask) != ena) && - (i++ < MAX_CLOCK_ENABLE_WAIT)) { - udelay(1); - } - - if (i <= MAX_CLOCK_ENABLE_WAIT) - pr_debug("Clock %s stable after %d loops\n", name, i); - else - printk(KERN_ERR "Clock %s didn't enable in %d tries\n", - name, MAX_CLOCK_ENABLE_WAIT); - - - return (i < MAX_CLOCK_ENABLE_WAIT) ? 1 : 0; -}; + r = ((__force u32)clk->enable_reg ^ (CM_FCLKEN ^ CM_ICLKEN)); + *other_reg = (__force void __iomem *)r; + *other_bit = clk->enable_bit; +} -/* - * Note: We don't need special code here for INVERT_ENABLE - * for the time being since INVERT_ENABLE only applies to clocks enabled by - * CM_CLKEN_PLL +/** + * omap2_clk_dflt_find_idlest - find CM_IDLEST reg va, bit shift for @clk + * @clk: struct clk * to find IDLEST info for + * @idlest_reg: void __iomem ** to return the CM_IDLEST va in + * @idlest_bit: u8 ** to return the CM_IDLEST bit shift in + * + * Return the CM_IDLEST register address and bit shift corresponding + * to the module that "owns" this clock. This default code assumes + * that the CM_IDLEST bit shift is the CM_*CLKEN bit shift, and that + * the IDLEST register address ID corresponds to the CM_*CLKEN + * register address ID (e.g., that CM_FCLKEN2 corresponds to + * CM_IDLEST2). This is not true for all modules. No return value. */ -static void omap2_clk_wait_ready(struct clk *clk) +void omap2_clk_dflt_find_idlest(struct clk *clk, void __iomem **idlest_reg, + u8 *idlest_bit) { - void __iomem *reg, *other_reg, *st_reg; - u32 bit; + u32 r; - /* - * REVISIT: This code is pretty ugly. It would be nice to generalize - * it and pull it into struct clk itself somehow. - */ - reg = clk->enable_reg; + r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20); + *idlest_reg = (__force void __iomem *)r; + *idlest_bit = clk->enable_bit; +} - /* - * Convert CM_ICLKEN* <-> CM_FCLKEN*. This conversion assumes - * it's just a matter of XORing the bits. - */ - other_reg = (void __iomem *)((u32)reg ^ (CM_FCLKEN ^ CM_ICLKEN)); +/** + * omap2_module_wait_ready - wait for an OMAP module to leave IDLE + * @clk: struct clk * belonging to the module + * + * If the necessary clocks for the OMAP hardware IP block that + * corresponds to clock @clk are enabled, then wait for the module to + * indicate readiness (i.e., to leave IDLE). This code does not + * belong in the clock code and will be moved in the medium term to + * module-dependent code. No return value. + */ +static void omap2_module_wait_ready(struct clk *clk) +{ + void __iomem *companion_reg, *idlest_reg; + u8 other_bit, idlest_bit; + + /* Not all modules have multiple clocks that their IDLEST depends on */ + if (clk->ops->find_companion) { + clk->ops->find_companion(clk, &companion_reg, &other_bit); + if (!(__raw_readl(companion_reg) & (1 << other_bit))) + return; + } - /* Check if both functional and interface clocks - * are running. */ - bit = 1 << clk->enable_bit; - if (!(__raw_readl(other_reg) & bit)) - return; - st_reg = (void __iomem *)(((u32)other_reg & ~0xf0) | 0x20); /* CM_IDLEST* */ + clk->ops->find_idlest(clk, &idlest_reg, &idlest_bit); - omap2_wait_clock_ready(st_reg, bit, clk->name); + omap2_cm_wait_idlest(idlest_reg, (1 << idlest_bit), clk->name); } -static int omap2_dflt_clk_enable(struct clk *clk) +int omap2_dflt_clk_enable(struct clk *clk) { u32 v; if (unlikely(clk->enable_reg == NULL)) { - printk(KERN_ERR "clock.c: Enable for %s without enable code\n", + pr_err("clock.c: Enable for %s without enable code\n", clk->name); return 0; /* REVISIT: -EINVAL */ } @@ -363,26 +376,13 @@ static int omap2_dflt_clk_enable(struct clk *clk) __raw_writel(v, clk->enable_reg); v = __raw_readl(clk->enable_reg); /* OCP barrier */ - return 0; -} + if (clk->ops->find_idlest) + omap2_module_wait_ready(clk); -static int omap2_dflt_clk_enable_wait(struct clk *clk) -{ - int ret; - - if (!clk->enable_reg) { - printk(KERN_ERR "clock.c: Enable for %s without enable code\n", - clk->name); - return 0; /* REVISIT: -EINVAL */ - } - - ret = omap2_dflt_clk_enable(clk); - if (ret == 0) - omap2_clk_wait_ready(clk); - return ret; + return 0; } -static void omap2_dflt_clk_disable(struct clk *clk) +void omap2_dflt_clk_disable(struct clk *clk) { u32 v; @@ -406,8 +406,10 @@ static void omap2_dflt_clk_disable(struct clk *clk) } const struct clkops clkops_omap2_dflt_wait = { - .enable = omap2_dflt_clk_enable_wait, + .enable = omap2_dflt_clk_enable, .disable = omap2_dflt_clk_disable, + .find_companion = omap2_clk_dflt_find_companion, + .find_idlest = omap2_clk_dflt_find_idlest, }; const struct clkops clkops_omap2_dflt = { diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index 2679ddf..9ae7540 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -65,6 +65,12 @@ int omap2_clksel_set_rate(struct clk *clk, unsigned long rate); u32 omap2_get_dpll_rate(struct clk *clk); int omap2_wait_clock_ready(void __iomem *reg, u32 cval, const char *name); void omap2_clk_prepare_for_reboot(void); +int omap2_dflt_clk_enable(struct clk *clk); +void omap2_dflt_clk_disable(struct clk *clk); +void omap2_clk_dflt_find_companion(struct clk *clk, void __iomem **other_reg, + u8 *other_bit); +void omap2_clk_dflt_find_idlest(struct clk *clk, void __iomem **idlest_reg, + u8 *idlest_bit); extern const struct clkops clkops_omap2_dflt_wait; extern const struct clkops clkops_omap2_dflt; diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c index f945156..ced555a 100644 --- a/arch/arm/mach-omap2/prcm.c +++ b/arch/arm/mach-omap2/prcm.c @@ -17,6 +17,7 @@ #include <linux/init.h> #include <linux/clk.h> #include <linux/io.h> +#include <linux/delay.h> #include <mach/common.h> #include <mach/prcm.h> @@ -28,6 +29,8 @@ static void __iomem *prm_base; static void __iomem *cm_base; +#define MAX_MODULE_ENABLE_WAIT 100000 + u32 omap_prcm_get_reset_sources(void) { /* XXX This presumably needs modification for 34XX */ @@ -120,6 +123,46 @@ u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx) } EXPORT_SYMBOL(cm_rmw_mod_reg_bits); +/** + * omap2_cm_wait_idlest - wait for IDLEST bit to indicate module readiness + * @reg: physical address of module IDLEST register + * @mask: value to mask against to determine if the module is active + * @name: name of the clock (for printk) + * + * Returns 1 if the module indicated readiness in time, or 0 if it + * failed to enable in roughly MAX_MODULE_ENABLE_WAIT microseconds. + */ +int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, const char *name) +{ + int i = 0; + int ena = 0; + + /* + * 24xx uses 0 to indicate not ready, and 1 to indicate ready. + * 34xx reverses this, just to keep us on our toes + */ + if (cpu_is_omap24xx()) + ena = mask; + else if (cpu_is_omap34xx()) + ena = 0; + else + BUG(); + + /* Wait for lock */ + while (((__raw_readl(reg) & mask) != ena) && + (i++ < MAX_MODULE_ENABLE_WAIT)) + udelay(1); + + if (i < MAX_MODULE_ENABLE_WAIT) + pr_debug("cm: Module associated with clock %s ready after %d " + "loops\n", name, i); + else + pr_err("cm: Module associated with clock %s didn't enable in " + "%d tries\n", name, MAX_MODULE_ENABLE_WAIT); + + return (i < MAX_MODULE_ENABLE_WAIT) ? 1 : 0; +}; + void __init omap2_set_globals_prcm(struct omap_globals *omap2_globals) { prm_base = omap2_globals->prm; diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h index f9f65e1..4b8b0d6 100644 --- a/arch/arm/plat-omap/include/mach/clock.h +++ b/arch/arm/plat-omap/include/mach/clock.h @@ -20,6 +20,8 @@ struct clockdomain; struct clkops { int (*enable)(struct clk *); void (*disable)(struct clk *); + void (*find_idlest)(struct clk *, void __iomem **, u8 *); + void (*find_companion)(struct clk *, void __iomem **, u8 *); }; #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \ diff --git a/arch/arm/plat-omap/include/mach/prcm.h b/arch/arm/plat-omap/include/mach/prcm.h index 24ac3c7..cda2a70 100644 --- a/arch/arm/plat-omap/include/mach/prcm.h +++ b/arch/arm/plat-omap/include/mach/prcm.h @@ -25,6 +25,7 @@ u32 omap_prcm_get_reset_sources(void); void omap_prcm_arch_reset(char mode); +int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, const char *name); #endif -- cgit v1.1 From 3dc2197579089c5b74c7fba666c8ccf1a449afb4 Mon Sep 17 00:00:00 2001 From: Paul Walmsley <paul@pwsan.com> Date: Fri, 24 Jul 2009 19:44:04 -0600 Subject: OMAP2 clock: 2430 I2CHS uses non-standard CM_IDLEST register OMAP2430 I2CHS CM_IDLEST bits are in CM_IDLEST1_CORE, but the CM_*CLKEN bits are in CM_{I,F}CLKEN2_CORE [1]. Fix by implementing a custom clkops .find_idlest function to return the correct slave IDLEST register. ... 1. OMAP2430 Multimedia Device Package-on-Package (POP) Silicon Revision 2.1 (Rev. V) Technical Reference Manual, tables 4-99 and 4-105. Signed-off-by: Paul Walmsley <paul@pwsan.com> --- arch/arm/mach-omap2/clock24xx.c | 37 +++++++++++++++++++++++++++++++++++-- arch/arm/mach-omap2/clock24xx.h | 4 ++-- 2 files changed, 37 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c index 44de027..bc5d3ac 100644 --- a/arch/arm/mach-omap2/clock24xx.c +++ b/arch/arm/mach-omap2/clock24xx.c @@ -30,6 +30,7 @@ #include <mach/clock.h> #include <mach/sram.h> +#include <mach/prcm.h> #include <asm/div64.h> #include <asm/clkdev.h> @@ -43,6 +44,18 @@ static const struct clkops clkops_oscck; static const struct clkops clkops_fixed; +static void omap2430_clk_i2chs_find_idlest(struct clk *clk, + void __iomem **idlest_reg, + u8 *idlest_bit); + +/* 2430 I2CHS has non-standard IDLEST register */ +static const struct clkops clkops_omap2430_i2chs_wait = { + .enable = omap2_dflt_clk_enable, + .disable = omap2_dflt_clk_disable, + .find_idlest = omap2430_clk_i2chs_find_idlest, + .find_companion = omap2_clk_dflt_find_companion, +}; + #include "clock24xx.h" struct omap_clk { @@ -240,6 +253,26 @@ static void __iomem *prcm_clksrc_ctrl; *-------------------------------------------------------------------------*/ /** + * omap2430_clk_i2chs_find_idlest - return CM_IDLEST info for 2430 I2CHS + * @clk: struct clk * being enabled + * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into + * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into + * + * OMAP2430 I2CHS CM_IDLEST bits are in CM_IDLEST1_CORE, but the + * CM_*CLKEN bits are in CM_{I,F}CLKEN2_CORE. This custom function + * passes back the correct CM_IDLEST register address for I2CHS + * modules. No return value. + */ +static void omap2430_clk_i2chs_find_idlest(struct clk *clk, + void __iomem **idlest_reg, + u8 *idlest_bit) +{ + *idlest_reg = OMAP_CM_REGADDR(CORE_MOD, CM_IDLEST); + *idlest_bit = clk->enable_bit; +} + + +/** * omap2xxx_clk_get_core_rate - return the CORE_CLK rate * @clk: pointer to the combined dpll_ck + core_ck (currently "dpll_ck") * @@ -325,8 +358,8 @@ static int omap2_clk_fixed_enable(struct clk *clk) else if (clk == &apll54_ck) cval = OMAP24XX_ST_54M_APLL; - omap2_wait_clock_ready(OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), cval, - clk->name); + omap2_cm_wait_idlest(OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), cval, + clk->name); /* * REVISIT: Should we return an error code if omap2_wait_clock_ready() diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h index 458f00c..d19cf7a 100644 --- a/arch/arm/mach-omap2/clock24xx.h +++ b/arch/arm/mach-omap2/clock24xx.h @@ -2337,7 +2337,7 @@ static struct clk i2c2_fck = { static struct clk i2chs2_fck = { .name = "i2c_fck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2430_i2chs_wait, .id = 2, .parent = &func_96m_ck, .clkdm_name = "core_l4_clkdm", @@ -2370,7 +2370,7 @@ static struct clk i2c1_fck = { static struct clk i2chs1_fck = { .name = "i2c_fck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2430_i2chs_wait, .id = 1, .parent = &func_96m_ck, .clkdm_name = "core_l4_clkdm", -- cgit v1.1 From 3c82e229f09a6acc8d24dc27c5e0e60b1d7161c2 Mon Sep 17 00:00:00 2001 From: Paul Walmsley <paul@pwsan.com> Date: Fri, 24 Jul 2009 19:44:06 -0600 Subject: OMAP3 clock: correct module IDLEST bits: SSI; DSS; USBHOST; HSOTGUSB Fix two bugs in the OMAP3 clock tree pertaining to the SSI, DSS, USBHOST, and HSOTGUSB devices. These devices are both interconnect initiators and targets. Without this patch, clk_enable()s on clocks for these modules can be very high latency (potentially up to ~200 milliseconds) and message such as the following are generated: Clock usbhost_48m_fck didn't enable in 100000 tries Two bugs are fixed by this patch. First, OMAP hardware only supports target CM_IDLEST register bits on ES2+ chips and beyond. ES1 chips should not wait for these clocks to enable. So, split the appropriate clocks into ES1 and ES2+ variants, so that kernels running on ES1 devices won't try to wait. Second, the current heuristic in omap2_clk_dflt_find_idlest() will fail for these clocks. It assumes that the CM_IDLEST bit to wait upon is the same as the CM_*CLKEN bit, which is false[1]. Fix by implementing custom clkops .find_idlest function pointers for the appropriate clocks that return the correct slave IDLEST bit shift. This was originally fixed in the linux-omap kernel during 2.6.29 in a slightly different manner[2][3]. In the medium-term future, all of the module IDLEST code will eventually be moved to the omap_hwmod code. Problem reported by Jarkko Nikula <jhnikula@gmail.com>: http://marc.info/?l=linux-omap&m=124306184903679&w=2 ... 1. See for example 34xx TRM Revision P Table 4-213 and 4-217 (for the DSS case). 2. http://www.spinics.net/lists/linux-omap/msg05512.html et seq. 3. http://lkml.indiana.edu/hypermail/linux/kernel/0901.3/01498.html Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Jarkko Nikula <jhnikula@gmail.com> --- arch/arm/mach-omap2/clock34xx.c | 118 +++++++++++++++++++++++++++++++++++++--- arch/arm/mach-omap2/clock34xx.h | 85 +++++++++++++++++++++++++---- 2 files changed, 185 insertions(+), 18 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index 1c6480d..cd7819c 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -2,7 +2,7 @@ * OMAP3-specific clock framework functions * * Copyright (C) 2007-2008 Texas Instruments, Inc. - * Copyright (C) 2007-2008 Nokia Corporation + * Copyright (C) 2007-2009 Nokia Corporation * * Written by Paul Walmsley * Testing and integration fixes by Jouni Högander @@ -41,6 +41,37 @@ static const struct clkops clkops_noncore_dpll_ops; +static void omap3430es2_clk_ssi_find_idlest(struct clk *clk, + void __iomem **idlest_reg, + u8 *idlest_bit); +static void omap3430es2_clk_hsotgusb_find_idlest(struct clk *clk, + void __iomem **idlest_reg, + u8 *idlest_bit); +static void omap3430es2_clk_dss_usbhost_find_idlest(struct clk *clk, + void __iomem **idlest_reg, + u8 *idlest_bit); + +static const struct clkops clkops_omap3430es2_ssi_wait = { + .enable = omap2_dflt_clk_enable, + .disable = omap2_dflt_clk_disable, + .find_idlest = omap3430es2_clk_ssi_find_idlest, + .find_companion = omap2_clk_dflt_find_companion, +}; + +static const struct clkops clkops_omap3430es2_hsotgusb_wait = { + .enable = omap2_dflt_clk_enable, + .disable = omap2_dflt_clk_disable, + .find_idlest = omap3430es2_clk_hsotgusb_find_idlest, + .find_companion = omap2_clk_dflt_find_companion, +}; + +static const struct clkops clkops_omap3430es2_dss_usbhost_wait = { + .enable = omap2_dflt_clk_enable, + .disable = omap2_dflt_clk_disable, + .find_idlest = omap3430es2_clk_dss_usbhost_find_idlest, + .find_companion = omap2_clk_dflt_find_companion, +}; + #include "clock34xx.h" struct omap_clk { @@ -157,10 +188,13 @@ static struct omap_clk omap34xx_clks[] = { CLK(NULL, "fshostusb_fck", &fshostusb_fck, CK_3430ES1), CLK(NULL, "core_12m_fck", &core_12m_fck, CK_343X), CLK("omap_hdq.0", "fck", &hdq_fck, CK_343X), - CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck, CK_343X), - CLK(NULL, "ssi_sst_fck", &ssi_sst_fck, CK_343X), + CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck_3430es1, CK_3430ES1), + CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck_3430es2, CK_3430ES2), + CLK(NULL, "ssi_sst_fck", &ssi_sst_fck_3430es1, CK_3430ES1), + CLK(NULL, "ssi_sst_fck", &ssi_sst_fck_3430es2, CK_3430ES2), CLK(NULL, "core_l3_ick", &core_l3_ick, CK_343X), - CLK("musb_hdrc", "ick", &hsotgusb_ick, CK_343X), + CLK("musb_hdrc", "ick", &hsotgusb_ick_3430es1, CK_3430ES1), + CLK("musb_hdrc", "ick", &hsotgusb_ick_3430es2, CK_3430ES2), CLK(NULL, "sdrc_ick", &sdrc_ick, CK_343X), CLK(NULL, "gpmc_fck", &gpmc_fck, CK_343X), CLK(NULL, "security_l3_ick", &security_l3_ick, CK_343X), @@ -193,18 +227,21 @@ static struct omap_clk omap34xx_clks[] = { CLK(NULL, "mailboxes_ick", &mailboxes_ick, CK_343X), CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_343X), CLK(NULL, "ssi_l4_ick", &ssi_l4_ick, CK_343X), - CLK(NULL, "ssi_ick", &ssi_ick, CK_343X), + CLK(NULL, "ssi_ick", &ssi_ick_3430es1, CK_3430ES1), + CLK(NULL, "ssi_ick", &ssi_ick_3430es2, CK_3430ES2), CLK(NULL, "usb_l4_ick", &usb_l4_ick, CK_3430ES1), CLK(NULL, "security_l4_ick2", &security_l4_ick2, CK_343X), CLK(NULL, "aes1_ick", &aes1_ick, CK_343X), CLK("omap_rng", "ick", &rng_ick, CK_343X), CLK(NULL, "sha11_ick", &sha11_ick, CK_343X), CLK(NULL, "des1_ick", &des1_ick, CK_343X), - CLK("omapfb", "dss1_fck", &dss1_alwon_fck, CK_343X), + CLK("omapfb", "dss1_fck", &dss1_alwon_fck_3430es1, CK_3430ES1), + CLK("omapfb", "dss1_fck", &dss1_alwon_fck_3430es2, CK_3430ES2), CLK("omapfb", "tv_fck", &dss_tv_fck, CK_343X), CLK("omapfb", "video_fck", &dss_96m_fck, CK_343X), CLK("omapfb", "dss2_fck", &dss2_alwon_fck, CK_343X), - CLK("omapfb", "ick", &dss_ick, CK_343X), + CLK("omapfb", "ick", &dss_ick_3430es1, CK_3430ES1), + CLK("omapfb", "ick", &dss_ick_3430es2, CK_3430ES2), CLK(NULL, "cam_mclk", &cam_mclk, CK_343X), CLK(NULL, "cam_ick", &cam_ick, CK_343X), CLK(NULL, "csi2_96m_fck", &csi2_96m_fck, CK_343X), @@ -301,6 +338,73 @@ static struct omap_clk omap34xx_clks[] = { #define SDRC_MPURATE_LOOPS 96 /** + * omap3430es2_clk_ssi_find_idlest - return CM_IDLEST info for SSI + * @clk: struct clk * being enabled + * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into + * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into + * + * The OMAP3430ES2 SSI target CM_IDLEST bit is at a different shift + * from the CM_{I,F}CLKEN bit. Pass back the correct info via + * @idlest_reg and @idlest_bit. No return value. + */ +static void omap3430es2_clk_ssi_find_idlest(struct clk *clk, + void __iomem **idlest_reg, + u8 *idlest_bit) +{ + u32 r; + + r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20); + *idlest_reg = (__force void __iomem *)r; + *idlest_bit = OMAP3430ES2_ST_SSI_IDLE_SHIFT; +} + +/** + * omap3430es2_clk_dss_usbhost_find_idlest - CM_IDLEST info for DSS, USBHOST + * @clk: struct clk * being enabled + * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into + * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into + * + * Some OMAP modules on OMAP3 ES2+ chips have both initiator and + * target IDLEST bits. For our purposes, we are concerned with the + * target IDLEST bits, which exist at a different bit position than + * the *CLKEN bit position for these modules (DSS and USBHOST) (The + * default find_idlest code assumes that they are at the same + * position.) No return value. + */ +static void omap3430es2_clk_dss_usbhost_find_idlest(struct clk *clk, + void __iomem **idlest_reg, + u8 *idlest_bit) +{ + u32 r; + + r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20); + *idlest_reg = (__force void __iomem *)r; + /* USBHOST_IDLE has same shift */ + *idlest_bit = OMAP3430ES2_ST_DSS_IDLE_SHIFT; +} + +/** + * omap3430es2_clk_hsotgusb_find_idlest - return CM_IDLEST info for HSOTGUSB + * @clk: struct clk * being enabled + * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into + * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into + * + * The OMAP3430ES2 HSOTGUSB target CM_IDLEST bit is at a different + * shift from the CM_{I,F}CLKEN bit. Pass back the correct info via + * @idlest_reg and @idlest_bit. No return value. + */ +static void omap3430es2_clk_hsotgusb_find_idlest(struct clk *clk, + void __iomem **idlest_reg, + u8 *idlest_bit) +{ + u32 r; + + r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20); + *idlest_reg = (__force void __iomem *)r; + *idlest_bit = OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT; +} + +/** * omap3_dpll_recalc - recalculate DPLL rate * @clk: DPLL struct clk * diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h index e433aec..57cc272 100644 --- a/arch/arm/mach-omap2/clock34xx.h +++ b/arch/arm/mach-omap2/clock34xx.h @@ -1568,7 +1568,7 @@ static const struct clksel ssi_ssr_clksel[] = { { .parent = NULL } }; -static struct clk ssi_ssr_fck = { +static struct clk ssi_ssr_fck_3430es1 = { .name = "ssi_ssr_fck", .ops = &clkops_omap2_dflt, .init = &omap2_init_clksel_parent, @@ -1581,10 +1581,31 @@ static struct clk ssi_ssr_fck = { .recalc = &omap2_clksel_recalc, }; -static struct clk ssi_sst_fck = { +static struct clk ssi_ssr_fck_3430es2 = { + .name = "ssi_ssr_fck", + .ops = &clkops_omap3430es2_ssi_wait, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_SSI_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_SSI_MASK, + .clksel = ssi_ssr_clksel, + .clkdm_name = "core_l4_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static struct clk ssi_sst_fck_3430es1 = { .name = "ssi_sst_fck", .ops = &clkops_null, - .parent = &ssi_ssr_fck, + .parent = &ssi_ssr_fck_3430es1, + .fixed_div = 2, + .recalc = &omap2_fixed_divisor_recalc, +}; + +static struct clk ssi_sst_fck_3430es2 = { + .name = "ssi_sst_fck", + .ops = &clkops_null, + .parent = &ssi_ssr_fck_3430es2, .fixed_div = 2, .recalc = &omap2_fixed_divisor_recalc, }; @@ -1606,9 +1627,19 @@ static struct clk core_l3_ick = { .recalc = &followparent_recalc, }; -static struct clk hsotgusb_ick = { +static struct clk hsotgusb_ick_3430es1 = { .name = "hsotgusb_ick", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, + .parent = &core_l3_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_HSOTGUSB_SHIFT, + .clkdm_name = "core_l3_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk hsotgusb_ick_3430es2 = { + .name = "hsotgusb_ick", + .ops = &clkops_omap3430es2_hsotgusb_wait, .parent = &core_l3_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_HSOTGUSB_SHIFT, @@ -1947,7 +1978,7 @@ static struct clk ssi_l4_ick = { .recalc = &followparent_recalc, }; -static struct clk ssi_ick = { +static struct clk ssi_ick_3430es1 = { .name = "ssi_ick", .ops = &clkops_omap2_dflt, .parent = &ssi_l4_ick, @@ -1957,6 +1988,16 @@ static struct clk ssi_ick = { .recalc = &followparent_recalc, }; +static struct clk ssi_ick_3430es2 = { + .name = "ssi_ick", + .ops = &clkops_omap3430es2_ssi_wait, + .parent = &ssi_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_SSI_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + /* REVISIT: Technically the TRM claims that this is CORE_CLK based, * but l4_ick makes more sense to me */ @@ -2024,7 +2065,7 @@ static struct clk des1_ick = { }; /* DSS */ -static struct clk dss1_alwon_fck = { +static struct clk dss1_alwon_fck_3430es1 = { .name = "dss1_alwon_fck", .ops = &clkops_omap2_dflt, .parent = &dpll4_m4x2_ck, @@ -2034,6 +2075,16 @@ static struct clk dss1_alwon_fck = { .recalc = &followparent_recalc, }; +static struct clk dss1_alwon_fck_3430es2 = { + .name = "dss1_alwon_fck", + .ops = &clkops_omap3430es2_dss_usbhost_wait, + .parent = &dpll4_m4x2_ck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_DSS1_SHIFT, + .clkdm_name = "dss_clkdm", + .recalc = &followparent_recalc, +}; + static struct clk dss_tv_fck = { .name = "dss_tv_fck", .ops = &clkops_omap2_dflt, @@ -2067,7 +2118,7 @@ static struct clk dss2_alwon_fck = { .recalc = &followparent_recalc, }; -static struct clk dss_ick = { +static struct clk dss_ick_3430es1 = { /* Handles both L3 and L4 clocks */ .name = "dss_ick", .ops = &clkops_omap2_dflt, @@ -2079,6 +2130,18 @@ static struct clk dss_ick = { .recalc = &followparent_recalc, }; +static struct clk dss_ick_3430es2 = { + /* Handles both L3 and L4 clocks */ + .name = "dss_ick", + .ops = &clkops_omap3430es2_dss_usbhost_wait, + .parent = &l4_ick, + .init = &omap2_init_clk_clkdm, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT, + .clkdm_name = "dss_clkdm", + .recalc = &followparent_recalc, +}; + /* CAM */ static struct clk cam_mclk = { @@ -2118,7 +2181,7 @@ static struct clk csi2_96m_fck = { static struct clk usbhost_120m_fck = { .name = "usbhost_120m_fck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &dpll5_m2_ck, .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN), @@ -2129,7 +2192,7 @@ static struct clk usbhost_120m_fck = { static struct clk usbhost_48m_fck = { .name = "usbhost_48m_fck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap3430es2_dss_usbhost_wait, .parent = &omap_48m_fck, .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN), @@ -2141,7 +2204,7 @@ static struct clk usbhost_48m_fck = { static struct clk usbhost_ick = { /* Handles both L3 and L4 clocks */ .name = "usbhost_ick", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap3430es2_dss_usbhost_wait, .parent = &l4_ick, .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN), -- cgit v1.1 From 81566a060bb8f989cc369ea28837b05bd4adcedb Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput <jaswinder@kernel.org> Date: Wed, 8 Jul 2009 20:00:15 +0530 Subject: ARM: includecheck fix: misc.c fix the following 'make includecheck' warning: arch/arm/boot/compressed/misc.c: linux/compiler.h is included more than once. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> --- arch/arm/boot/compressed/misc.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c index 9e6e512..17153b5 100644 --- a/arch/arm/boot/compressed/misc.c +++ b/arch/arm/boot/compressed/misc.c @@ -29,7 +29,6 @@ unsigned int __machine_arch_type; static void putstr(const char *ptr); -#include <linux/compiler.h> #include <mach/uncompress.h> #ifdef CONFIG_DEBUG_ICEDCC -- cgit v1.1 From feecaf73bb437cf72a44bd71598c6532d357f78e Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput <jaswinder@kernel.org> Date: Wed, 8 Jul 2009 20:01:39 +0530 Subject: ARM: includecheck fix: atomic.h fix the following 'make includecheck' warning: arch/arm/include/asm/atomic.h: asm/system.h is included more than once. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> --- arch/arm/include/asm/atomic.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h index 9e07fe5..9ed2377 100644 --- a/arch/arm/include/asm/atomic.h +++ b/arch/arm/include/asm/atomic.h @@ -159,8 +159,6 @@ static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr) #else /* ARM_ARCH_6 */ -#include <asm/system.h> - #ifdef CONFIG_SMP #error SMP not supported on pre-ARMv6 CPUs #endif -- cgit v1.1 From 44e96d452173ed22a7ba2291c7d566bf4b406f62 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput <jaswinder@kernel.org> Date: Wed, 8 Jul 2009 20:03:08 +0530 Subject: ARM: includecheck fix: board-dm355-evm.c fix the following 'make includecheck' warning: arch/arm/mach-davinci/board-dm355-evm.c: mach/common.h is included more than once. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> --- arch/arm/mach-davinci/board-dm355-evm.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index 5ac2f56..d6ab64c 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -37,7 +37,6 @@ #include <mach/serial.h> #include <mach/nand.h> #include <mach/mmc.h> -#include <mach/common.h> #define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e10000 #define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 -- cgit v1.1 From 7f25b0ac2dde2de399d6cfe42d9ec7066e665f2f Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput <jaswinder@kernel.org> Date: Wed, 8 Jul 2009 20:04:33 +0530 Subject: ARM: includecheck fix: board-dm355-leopard.c fix the following 'make includecheck' warning: arch/arm/mach-davinci/board-dm355-leopard.c: mach/common.h is included more than once. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> --- arch/arm/mach-davinci/board-dm355-leopard.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c index 28c9008..84ad5d1 100644 --- a/arch/arm/mach-davinci/board-dm355-leopard.c +++ b/arch/arm/mach-davinci/board-dm355-leopard.c @@ -36,7 +36,6 @@ #include <mach/serial.h> #include <mach/nand.h> #include <mach/mmc.h> -#include <mach/common.h> #define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e10000 #define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 -- cgit v1.1 From 6608168486973a33d24d27b25fc94d4743c1a1e5 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput <jaswinder@kernel.org> Date: Wed, 8 Jul 2009 20:05:34 +0530 Subject: ARM: includecheck fix: board-dm644x-evm.c fix the following 'make includecheck' warning: arch/arm/mach-davinci/board-dm644x-evm.c: mach/common.h is included more than once. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> --- arch/arm/mach-davinci/board-dm644x-evm.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index d9d4045..56c8cd0 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -45,7 +45,6 @@ #include <mach/nand.h> #include <mach/mmc.h> #include <mach/emac.h> -#include <mach/common.h> #define DM644X_EVM_PHY_MASK (0x2) #define DM644X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ -- cgit v1.1 From 78eacf0b0373f524509da261b771f8baa28806b5 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput <jaswinder@kernel.org> Date: Wed, 8 Jul 2009 20:06:42 +0530 Subject: ARM: includecheck fix: board-dm646x-evm.c fix the following 'make includecheck' warning: arch/arm/mach-davinci/board-dm646x-evm.c: mach/common.h is included more than once. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> --- arch/arm/mach-davinci/board-dm646x-evm.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index e17de63..8657e72 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -47,7 +47,6 @@ #include <mach/i2c.h> #include <mach/mmc.h> #include <mach/emac.h> -#include <mach/common.h> #define DM646X_EVM_PHY_MASK (0x2) #define DM646X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ -- cgit v1.1 From 7a33aed825c4d2bafea748384e3331661fc3a180 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput <jaswinder@kernel.org> Date: Wed, 8 Jul 2009 20:07:26 +0530 Subject: ARM: includecheck fix: board-sffsdr.c fix the following 'make includecheck' warning: arch/arm/mach-davinci/board-sffsdr.c: mach/common.h is included more than once. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Acked-by: Philip Balister <philip@opensdr.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> --- arch/arm/mach-davinci/board-sffsdr.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c index 748a8e4..7acdfd8a 100644 --- a/arch/arm/mach-davinci/board-sffsdr.c +++ b/arch/arm/mach-davinci/board-sffsdr.c @@ -52,7 +52,6 @@ #include <mach/serial.h> #include <mach/psc.h> #include <mach/mux.h> -#include <mach/common.h> #define SFFSDR_PHY_MASK (0x2) #define SFFSDR_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ -- cgit v1.1 From 52cbbd41f7afeceba4be2e4062138781aacd440c Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput <jaswinder@kernel.org> Date: Wed, 8 Jul 2009 20:10:02 +0530 Subject: ARM: includecheck fix: mach-omap1/mcbsp.c fix the following 'make includecheck' warning: arch/arm/mach-omap1/mcbsp.c: mach/irqs.h is included more than once. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Acked-by: Eduardo Valentin <eduardo.valentin@nokia.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> --- arch/arm/mach-omap1/mcbsp.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index a2d7814..505d98c 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -19,7 +19,6 @@ #include <mach/irqs.h> #include <mach/dma.h> -#include <mach/irqs.h> #include <mach/mux.h> #include <mach/cpu.h> #include <mach/mcbsp.h> -- cgit v1.1 From efda2b4c8a643290867d9f5816e36f71a5acee7d Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput <jaswinder@kernel.org> Date: Wed, 8 Jul 2009 20:11:05 +0530 Subject: ARM: includecheck fix: mach-omap2/mcbsp.c fix the following 'make includecheck' warning: arch/arm/mach-omap2/mcbsp.c: mach/irqs.h is included more than once. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Acked-by: Eduardo Valentin <eduardo.valentin@nokia.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> --- arch/arm/mach-omap2/mcbsp.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index a5c0f04..99b6e15 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -19,7 +19,6 @@ #include <mach/irqs.h> #include <mach/dma.h> -#include <mach/irqs.h> #include <mach/mux.h> #include <mach/cpu.h> #include <mach/mcbsp.h> -- cgit v1.1 From 2e6e2c143cdefc2624722659766d1f3c098d79e1 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput <jaswinder@kernel.org> Date: Wed, 8 Jul 2009 20:12:07 +0530 Subject: ARM: includecheck fix: plat-s3c64xx/pm.c fix the following 'make includecheck' warning: arch/arm/plat-s3c64xx/pm.c: plat/regs-gpio.h is included more than once. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> --- arch/arm/plat-s3c64xx/pm.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-s3c64xx/pm.c b/arch/arm/plat-s3c64xx/pm.c index 07a6516..47632fc 100644 --- a/arch/arm/plat-s3c64xx/pm.c +++ b/arch/arm/plat-s3c64xx/pm.c @@ -117,8 +117,6 @@ void s3c_pm_save_core(void) * this. */ -#include <plat/regs-gpio.h> - static void s3c64xx_cpu_suspend(void) { unsigned long tmp; -- cgit v1.1 From 40e03b581a8a0b638bc1e9b957ae0536a4a00ad3 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput <jaswinder@kernel.org> Date: Wed, 8 Jul 2009 20:13:24 +0530 Subject: ARM: includecheck fix: plat-stmp3xxx/pinmux.c fix the following 'make includecheck' warning: arch/arm/plat-stmp3xxx/pinmux.c: linux/sysdev.h is included more than once. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Acked-by: dmitry pervushin <dpervushin@embeddedalley.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> --- arch/arm/plat-stmp3xxx/pinmux.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-stmp3xxx/pinmux.c b/arch/arm/plat-stmp3xxx/pinmux.c index d412003..6d6b1a4 100644 --- a/arch/arm/plat-stmp3xxx/pinmux.c +++ b/arch/arm/plat-stmp3xxx/pinmux.c @@ -22,7 +22,6 @@ #include <linux/sysdev.h> #include <linux/string.h> #include <linux/bitops.h> -#include <linux/sysdev.h> #include <linux/irq.h> #include <mach/hardware.h> -- cgit v1.1 From efffde36d20613d91a5ea9529b03f477077f41ea Mon Sep 17 00:00:00 2001 From: Michal Simek <monstr@monstr.eu> Date: Thu, 9 Jul 2009 11:33:39 +0200 Subject: microblaze: Define tlb_flush macro This fix remove bug which we had till now in all Microblaze MMU code. Primary tested on mmap01 LTP test. We forget to flush invalid tlb which were changed - we used them and there were wrong old data which wasn't correct. Signed-off-by: Michal Simek <monstr@monstr.eu> --- arch/microblaze/include/asm/tlb.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/microblaze/include/asm/tlb.h b/arch/microblaze/include/asm/tlb.h index c472d28..e8abd4a 100644 --- a/arch/microblaze/include/asm/tlb.h +++ b/arch/microblaze/include/asm/tlb.h @@ -11,7 +11,7 @@ #ifndef _ASM_MICROBLAZE_TLB_H #define _ASM_MICROBLAZE_TLB_H -#define tlb_flush(tlb) do {} while (0) +#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm) #include <asm-generic/tlb.h> -- cgit v1.1 From 1170902b343053f50d4caf8ec2aa745fd0ce5c84 Mon Sep 17 00:00:00 2001 From: Huang Weiyi <weiyi.huang@gmail.com> Date: Sat, 11 Jul 2009 09:32:08 +0800 Subject: microblaze: remove duplicated #include Remove duplicated #include('s) in arch/microblaze/include/asm/io.h Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Michal Simek <monstr@monstr.eu> --- arch/microblaze/include/asm/io.h | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/microblaze/include/asm/io.h b/arch/microblaze/include/asm/io.h index 5c17342..7c3ec13 100644 --- a/arch/microblaze/include/asm/io.h +++ b/arch/microblaze/include/asm/io.h @@ -14,7 +14,6 @@ #include <asm/byteorder.h> #include <asm/page.h> #include <linux/types.h> -#include <asm/byteorder.h> #include <linux/mm.h> /* Get struct page {...} */ -- cgit v1.1 From 909964ec89ba466d75d53250d5738d1891cc1a3d Mon Sep 17 00:00:00 2001 From: John Williams <john.williams@petalogix.com> Date: Mon, 22 Jun 2009 14:02:09 +1000 Subject: microblaze: Final support for statically linked DTB If r7 is zero at kernel boot, or does not point to a valid DTB, then we fall back to a DTB (assumed to be) linked statically in the kernel, instead of blindly copying bogus cruft into the kernel DTB memory region Signed-off-by: John Williams <john.williams@petalogix.com> Signed-off-by: Michal Simek <monstr@monstr.eu> --- arch/microblaze/include/asm/prom.h | 23 +++++++++++++---------- arch/microblaze/kernel/head.S | 15 +++++++++++---- arch/microblaze/kernel/setup.c | 3 ++- 3 files changed, 26 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/microblaze/include/asm/prom.h b/arch/microblaze/include/asm/prom.h index 20f7b3a..37e6f30 100644 --- a/arch/microblaze/include/asm/prom.h +++ b/arch/microblaze/include/asm/prom.h @@ -16,6 +16,18 @@ #define _ASM_MICROBLAZE_PROM_H #ifdef __KERNEL__ +/* Definitions used by the flattened device tree */ +#define OF_DT_HEADER 0xd00dfeed /* marker */ +#define OF_DT_BEGIN_NODE 0x1 /* Start of node, full name */ +#define OF_DT_END_NODE 0x2 /* End node */ +#define OF_DT_PROP 0x3 /* Property: name off, size, content */ +#define OF_DT_NOP 0x4 /* nop */ +#define OF_DT_END 0x9 + +#define OF_DT_VERSION 0x10 + +#ifndef __ASSEMBLY__ + #include <linux/types.h> #include <linux/proc_fs.h> #include <linux/platform_device.h> @@ -29,16 +41,6 @@ #define of_prop_cmp(s1, s2) strcmp((s1), (s2)) #define of_node_cmp(s1, s2) strcasecmp((s1), (s2)) -/* Definitions used by the flattened device tree */ -#define OF_DT_HEADER 0xd00dfeed /* marker */ -#define OF_DT_BEGIN_NODE 0x1 /* Start of node, full name */ -#define OF_DT_END_NODE 0x2 /* End node */ -#define OF_DT_PROP 0x3 /* Property: name off, size, content */ -#define OF_DT_NOP 0x4 /* nop */ -#define OF_DT_END 0x9 - -#define OF_DT_VERSION 0x10 - /* * This is what gets passed to the kernel by prom_init or kexec * @@ -309,5 +311,6 @@ extern void __iomem *of_iomap(struct device_node *device, int index); */ #include <linux/of.h> +#endif /* __ASSEMBLY__ */ #endif /* __KERNEL__ */ #endif /* _ASM_MICROBLAZE_PROM_H */ diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S index e568d6e..815bcaa 100644 --- a/arch/microblaze/kernel/head.S +++ b/arch/microblaze/kernel/head.S @@ -31,6 +31,7 @@ #include <linux/linkage.h> #include <asm/thread_info.h> #include <asm/page.h> +#include <asm/prom.h> /* for OF_DT_HEADER */ #ifdef CONFIG_MMU #include <asm/setup.h> /* COMMAND_LINE_SIZE */ @@ -54,11 +55,16 @@ ENTRY(_start) andi r1, r1, ~2 mts rmsr, r1 -/* save fdt to kernel location */ -/* r7 stores pointer to fdt blob */ - beqi r7, no_fdt_arg +/* r7 may point to an FDT, or there may be one linked in. + if it's in r7, we've got to save it away ASAP. + We ensure r7 points to a valid FDT, just in case the bootloader + is broken or non-existent */ + beqi r7, no_fdt_arg /* NULL pointer? don't copy */ + lw r11, r0, r7 /* Does r7 point to a */ + rsubi r11, r11, OF_DT_HEADER /* valid FDT? */ + bnei r11, no_fdt_arg /* No - get out of here */ or r11, r0, r0 /* incremment */ - ori r4, r0, TOPHYS(_fdt_start) /* save bram context */ + ori r4, r0, TOPHYS(_fdt_start) ori r3, r0, (0x4000 - 4) _copy_fdt: lw r12, r7, r11 /* r12 = r7 + r11 */ @@ -67,6 +73,7 @@ _copy_fdt: bgtid r3, _copy_fdt /* loop for all entries */ addik r3, r3, -4 /* descrement loop */ no_fdt_arg: + add r7, r0, r0 /* Clear r7, just to be sure */ #ifdef CONFIG_MMU diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c index 8709bea..59a3836 100644 --- a/arch/microblaze/kernel/setup.c +++ b/arch/microblaze/kernel/setup.c @@ -139,7 +139,8 @@ void __init machine_early_init(const char *cmdline, unsigned int ram, #endif early_printk("Ramdisk addr 0x%08x, FDT 0x%08x\n", ram, fdt); - printk(KERN_NOTICE "Found FDT at 0x%08x\n", fdt); + if(fdt) + printk(KERN_NOTICE "Found FDT at 0x%08x\n", fdt); #ifdef CONFIG_MTD_UCLINUX early_printk("Found romfs @ 0x%08x (0x%08x)\n", -- cgit v1.1 From 74510f2a2751ed56b5ab099b2e3b7697b91aa77e Mon Sep 17 00:00:00 2001 From: Michal Simek <monstr@monstr.eu> Date: Mon, 22 Jun 2009 10:28:40 +0200 Subject: microblaze: Add messages about FDT blob Print accurate message about place where FDT blob is. Signed-off-by: Michal Simek <monstr@monstr.eu> --- arch/microblaze/kernel/setup.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c index 59a3836..2a97bf5 100644 --- a/arch/microblaze/kernel/setup.c +++ b/arch/microblaze/kernel/setup.c @@ -138,9 +138,12 @@ void __init machine_early_init(const char *cmdline, unsigned int ram, setup_early_printk(NULL); #endif - early_printk("Ramdisk addr 0x%08x, FDT 0x%08x\n", ram, fdt); - if(fdt) - printk(KERN_NOTICE "Found FDT at 0x%08x\n", fdt); + early_printk("Ramdisk addr 0x%08x, ", ram); + if (fdt) + early_printk("FDT at 0x%08x\n", fdt); + else + early_printk("Compiled-in FDT at 0x%08x\n", + (unsigned int)_fdt_start); #ifdef CONFIG_MTD_UCLINUX early_printk("Found romfs @ 0x%08x (0x%08x)\n", -- cgit v1.1 From a69cb8c4662dd0a7b01b32a9165b1a1697068f19 Mon Sep 17 00:00:00 2001 From: Michal Simek <monstr@monstr.eu> Date: Mon, 22 Jun 2009 10:55:40 +0200 Subject: microblaze: Not to clear r7 after copying DTB to kernel I can't clear r7 because if I do it I lose information where DTB come from. Signed-off-by: Michal Simek <monstr@monstr.eu> --- arch/microblaze/kernel/head.S | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S index 815bcaa..3c4d4a2 100644 --- a/arch/microblaze/kernel/head.S +++ b/arch/microblaze/kernel/head.S @@ -73,7 +73,6 @@ _copy_fdt: bgtid r3, _copy_fdt /* loop for all entries */ addik r3, r3, -4 /* descrement loop */ no_fdt_arg: - add r7, r0, r0 /* Clear r7, just to be sure */ #ifdef CONFIG_MMU -- cgit v1.1 From ea3fd1466f81a851452bf7f34ccb9b5058e4793c Mon Sep 17 00:00:00 2001 From: Michal Simek <monstr@monstr.eu> Date: Mon, 22 Jun 2009 12:31:55 +0200 Subject: microblaze: Clear print messages for DTB passing via r7 It is necessary to zeroed r7 when r7 points to bad dtb - this caused that we have correct messages about compiled-in dtb or passing via r7 Signed-off-by: Michal Simek <monstr@monstr.eu> --- arch/microblaze/kernel/head.S | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S index 3c4d4a2..e41c6ce 100644 --- a/arch/microblaze/kernel/head.S +++ b/arch/microblaze/kernel/head.S @@ -62,7 +62,10 @@ ENTRY(_start) beqi r7, no_fdt_arg /* NULL pointer? don't copy */ lw r11, r0, r7 /* Does r7 point to a */ rsubi r11, r11, OF_DT_HEADER /* valid FDT? */ + beqi r11, _prepare_copy_fdt + or r7, r0, r0 /* clear R7 when not valid DTB */ bnei r11, no_fdt_arg /* No - get out of here */ +_prepare_copy_fdt: or r11, r0, r0 /* incremment */ ori r4, r0, TOPHYS(_fdt_start) ori r3, r0, (0x4000 - 4) -- cgit v1.1 From 7bcb63b21327427b130edeb6e6ad44ee260b3043 Mon Sep 17 00:00:00 2001 From: Michal Simek <monstr@monstr.eu> Date: Mon, 13 Jul 2009 16:46:54 +0200 Subject: microblaze: Fix put_user macro for 64bits arguments For 64bits arguments gcc caused that put_user macro works with wrong value because of optimalization. Adding volatile caused that gcc not optimized it. It is possible to use (as Blackfin do) two put_user macros with 32bits arguments but there is one more instruction which is due to duplication zero return value which is called put_user_asm macro. Signed-off-by: Michal Simek <monstr@monstr.eu> --- arch/microblaze/include/asm/uaccess.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/microblaze/include/asm/uaccess.h b/arch/microblaze/include/asm/uaccess.h index 65adad6..5431b46 100644 --- a/arch/microblaze/include/asm/uaccess.h +++ b/arch/microblaze/include/asm/uaccess.h @@ -189,7 +189,7 @@ extern long strnlen_user(const char *src, long count); #define __put_user(x, ptr) \ ({ \ - __typeof__(*(ptr)) __gu_val = x; \ + __typeof__(*(ptr)) volatile __gu_val = (x); \ long __gu_err = 0; \ switch (sizeof(__gu_val)) { \ case 1: \ -- cgit v1.1 From f14d6f7c31c73a902a6b567dc719128e74603902 Mon Sep 17 00:00:00 2001 From: Michal Simek <monstr@monstr.eu> Date: Wed, 15 Jul 2009 13:39:35 +0200 Subject: microblaze: Add _PAGE_FILE macros to pgtable.h We need to define _PAGE_FILE macro and change pte functions. Microblaze use the same MMU as PowerPC that's why we define _PAGE_FILE in the same style. This change fixed remap_file_pages01 LTP test. Signed-off-by: Michal Simek <monstr@monstr.eu> --- arch/microblaze/include/asm/pgtable.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/microblaze/include/asm/pgtable.h b/arch/microblaze/include/asm/pgtable.h index 4c57a58..cc3a4df 100644 --- a/arch/microblaze/include/asm/pgtable.h +++ b/arch/microblaze/include/asm/pgtable.h @@ -185,6 +185,7 @@ static inline pte_t pte_mkspecial(pte_t pte) { return pte; } /* Definitions for MicroBlaze. */ #define _PAGE_GUARDED 0x001 /* G: page is guarded from prefetch */ +#define _PAGE_FILE 0x001 /* when !present: nonlinear file mapping */ #define _PAGE_PRESENT 0x002 /* software: PTE contains a translation */ #define _PAGE_NO_CACHE 0x004 /* I: caching is inhibited */ #define _PAGE_WRITETHRU 0x008 /* W: caching is write-through */ @@ -320,8 +321,7 @@ static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_RW; } static inline int pte_exec(pte_t pte) { return pte_val(pte) & _PAGE_EXEC; } static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; } static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; } -/* FIXME */ -static inline int pte_file(pte_t pte) { return 0; } +static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE; } static inline void pte_uncache(pte_t pte) { pte_val(pte) |= _PAGE_NO_CACHE; } static inline void pte_cache(pte_t pte) { pte_val(pte) &= ~_PAGE_NO_CACHE; } @@ -488,7 +488,7 @@ static inline pmd_t *pmd_offset(pgd_t *dir, unsigned long address) /* Encode and decode a nonlinear file mapping entry */ #define PTE_FILE_MAX_BITS 29 #define pte_to_pgoff(pte) (pte_val(pte) >> 3) -#define pgoff_to_pte(off) ((pte_t) { ((off) << 3) }) +#define pgoff_to_pte(off) ((pte_t) { ((off) << 3) | _PAGE_FILE }) extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; -- cgit v1.1 From f10eca6e107fd223c24393c09c40b916d2b3c427 Mon Sep 17 00:00:00 2001 From: Michal Simek <monstr@monstr.eu> Date: Thu, 16 Jul 2009 16:00:49 +0200 Subject: microblaze: Fix do_page_fault for no context Calling fixup when we are in kernel mode. This prevent fault for copy_to/from_user. This fault was find thanks to writev01/03/04 LTP tests. Signed-off-by: Michal Simek <monstr@monstr.eu> --- arch/microblaze/mm/fault.c | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/microblaze/mm/fault.c b/arch/microblaze/mm/fault.c index 956607a..398c761 100644 --- a/arch/microblaze/mm/fault.c +++ b/arch/microblaze/mm/fault.c @@ -122,15 +122,10 @@ void do_page_fault(struct pt_regs *regs, unsigned long address, } #endif /* CONFIG_KGDB */ - if (in_atomic() || mm == NULL) { - /* FIXME */ - if (kernel_mode(regs)) { - printk(KERN_EMERG - "Page fault in kernel mode - Oooou!!! pid %d\n", - current->pid); - _exception(SIGSEGV, regs, code, address); - return; - } + if (in_atomic() || !mm) { + if (kernel_mode(regs)) + goto bad_area_nosemaphore; + /* in_atomic() in user mode is really bad, as is current->mm == NULL. */ printk(KERN_EMERG "Page fault in user mode with " -- cgit v1.1 From 94ad8eb854cbc1cf875a318f9b97314ddc6b1560 Mon Sep 17 00:00:00 2001 From: Michal Simek <monstr@monstr.eu> Date: Tue, 21 Jul 2009 12:47:04 +0200 Subject: microblaze: Detect new Microblaze 7.20 versions Signed-off-by: Michal Simek <monstr@monstr.eu> --- arch/microblaze/kernel/cpu/cpuinfo.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/microblaze/kernel/cpu/cpuinfo.c b/arch/microblaze/kernel/cpu/cpuinfo.c index a10bea1..c411c67 100644 --- a/arch/microblaze/kernel/cpu/cpuinfo.c +++ b/arch/microblaze/kernel/cpu/cpuinfo.c @@ -26,6 +26,8 @@ const struct cpu_ver_key cpu_ver_lookup[] = { {"7.10.b", 0x09}, {"7.10.c", 0x0a}, {"7.10.d", 0x0b}, + {"7.20.a", 0x0c}, + {"7.20.b", 0x0d}, /* FIXME There is no keycode defined in MBV for these versions */ {"2.10.a", 0x10}, {"3.00.a", 0x20}, -- cgit v1.1 From 3863dbceac7e69642b95f43de1c12c6236fdbe5b Mon Sep 17 00:00:00 2001 From: Michal Simek <monstr@monstr.eu> Date: Tue, 21 Jul 2009 12:48:01 +0200 Subject: microblaze: Support unaligned address for put/get_user macros This patch add support for cases where load/store instruction in put/get_user macro gets unaligned pointer to data and this address is not valid. I prevent all cases which can failed. I had to disable first stage of unaligned handler which is used only for noMMU kernel and the whole work is done when interrupt is enabled. You have enable HW support for detect unaligned access in Microblaze. This patch fixed three LTP tests: getpeername01, getsockname01, socketpair01 Signed-off-by: Michal Simek <monstr@monstr.eu> --- arch/microblaze/kernel/hw_exception_handler.S | 109 +++++++++++--------------- arch/microblaze/mm/fault.c | 2 +- 2 files changed, 47 insertions(+), 64 deletions(-) (limited to 'arch') diff --git a/arch/microblaze/kernel/hw_exception_handler.S b/arch/microblaze/kernel/hw_exception_handler.S index 9d591cd..3288c97 100644 --- a/arch/microblaze/kernel/hw_exception_handler.S +++ b/arch/microblaze/kernel/hw_exception_handler.S @@ -74,6 +74,7 @@ #include <asm/mmu.h> #include <asm/pgtable.h> +#include <asm/signal.h> #include <asm/asm-offsets.h> /* Helpful Macros */ @@ -428,19 +429,9 @@ handle_unaligned_ex: mfs r17, rbtr; /* ESR[DS] set - return address in BTR */ nop _no_delayslot: -#endif - -#ifdef CONFIG_MMU - /* Check if unaligned address is last on a 4k page */ - andi r5, r4, 0xffc - xori r5, r5, 0xffc - bnei r5, _unaligned_ex2 - _unaligned_ex1: - RESTORE_STATE; -/* Another page must be accessed or physical address not in page table */ - bri unaligned_data_trap - - _unaligned_ex2: + /* jump to high level unaligned handler */ + RESTORE_STATE; + bri unaligned_data_trap #endif andi r6, r3, 0x3E0; /* Mask and extract the register operand */ srl r6, r6; /* r6 >> 5 */ @@ -450,45 +441,6 @@ _no_delayslot: srl r6, r6; /* Store the register operand in a temporary location */ sbi r6, r0, TOPHYS(ex_reg_op); -#ifdef CONFIG_MMU - /* Get physical address */ - /* If we are faulting a kernel address, we have to use the - * kernel page tables. - */ - ori r5, r0, CONFIG_KERNEL_START - cmpu r5, r4, r5 - bgti r5, _unaligned_ex3 - ori r5, r0, swapper_pg_dir - bri _unaligned_ex4 - - /* Get the PGD for the current thread. */ -_unaligned_ex3: /* user thread */ - addi r5 ,CURRENT_TASK, TOPHYS(0); /* get current task address */ - lwi r5, r5, TASK_THREAD + PGDIR -_unaligned_ex4: - tophys(r5,r5) - BSRLI(r6,r4,20) /* Create L1 (pgdir/pmd) address */ - andi r6, r6, 0xffc -/* Assume pgdir aligned on 4K boundary, no need for "andi r5,r5,0xfffff003" */ - or r5, r5, r6 - lwi r6, r5, 0 /* Get L1 entry */ - andi r5, r6, 0xfffff000 /* Extract L2 (pte) base address. */ - beqi r5, _unaligned_ex1 /* Bail if no table */ - - tophys(r5,r5) - BSRLI(r6,r4,10) /* Compute PTE address */ - andi r6, r6, 0xffc - andi r5, r5, 0xfffff003 - or r5, r5, r6 - lwi r5, r5, 0 /* Get Linux PTE */ - - andi r6, r5, _PAGE_PRESENT - beqi r6, _unaligned_ex1 /* Bail if no page */ - - andi r5, r5, 0xfffff000 /* Extract RPN */ - andi r4, r4, 0x00000fff /* Extract offset */ - or r4, r4, r5 /* Create physical address */ -#endif /* CONFIG_MMU */ andi r6, r3, 0x400; /* Extract ESR[S] */ bnei r6, ex_sw; @@ -959,15 +911,15 @@ _unaligned_data_exception: andi r6, r3, 0x800; /* Extract ESR[W] - delay slot */ ex_lw_vm: beqid r6, ex_lhw_vm; - lbui r5, r4, 0; /* Exception address in r4 - delay slot */ +load1: lbui r5, r4, 0; /* Exception address in r4 - delay slot */ /* Load a word, byte-by-byte from destination address and save it in tmp space*/ la r6, r0, ex_tmp_data_loc_0; sbi r5, r6, 0; - lbui r5, r4, 1; +load2: lbui r5, r4, 1; sbi r5, r6, 1; - lbui r5, r4, 2; +load3: lbui r5, r4, 2; sbi r5, r6, 2; - lbui r5, r4, 3; +load4: lbui r5, r4, 3; sbi r5, r6, 3; brid ex_lw_tail_vm; /* Get the destination register value into r3 - delay slot */ @@ -977,7 +929,7 @@ ex_lhw_vm: * save it in tmp space */ la r6, r0, ex_tmp_data_loc_0; sbi r5, r6, 0; - lbui r5, r4, 1; +load5: lbui r5, r4, 1; sbi r5, r6, 1; lhui r3, r6, 0; /* Get the destination register value into r3 */ ex_lw_tail_vm: @@ -996,22 +948,53 @@ ex_sw_tail_vm: swi r3, r5, 0; /* Get the word - delay slot */ /* Store the word, byte-by-byte into destination address */ lbui r3, r5, 0; - sbi r3, r4, 0; +store1: sbi r3, r4, 0; lbui r3, r5, 1; - sbi r3, r4, 1; +store2: sbi r3, r4, 1; lbui r3, r5, 2; - sbi r3, r4, 2; +store3: sbi r3, r4, 2; lbui r3, r5, 3; brid ret_from_exc; - sbi r3, r4, 3; /* Delay slot */ +store4: sbi r3, r4, 3; /* Delay slot */ ex_shw_vm: /* Store the lower half-word, byte-by-byte into destination address */ lbui r3, r5, 2; - sbi r3, r4, 0; +store5: sbi r3, r4, 0; lbui r3, r5, 3; brid ret_from_exc; - sbi r3, r4, 1; /* Delay slot */ +store6: sbi r3, r4, 1; /* Delay slot */ ex_sw_end_vm: /* Exception handling of store word, ends. */ + +/* We have to prevent cases that get/put_user macros get unaligned pointer + * to bad page area. We have to find out which origin instruction caused it + * and called fixup for that origin instruction not instruction in unaligned + * handler */ +ex_unaligned_fixup: + ori r5, r7, 0 /* setup pointer to pt_regs */ + lwi r6, r7, PT_PC; /* faulting address is one instruction above */ + addik r6, r6, -4 /* for finding proper fixup */ + swi r6, r7, PT_PC; /* a save back it to PT_PC */ + addik r7, r0, SIGSEGV + /* call bad_page_fault for finding aligned fixup, fixup address is saved + * in PT_PC which is used as return address from exception */ + la r15, r0, ret_from_exc-8 /* setup return address */ + brid bad_page_fault + nop + +/* We prevent all load/store because it could failed any attempt to access */ +.section __ex_table,"a"; + .word load1,ex_unaligned_fixup; + .word load2,ex_unaligned_fixup; + .word load3,ex_unaligned_fixup; + .word load4,ex_unaligned_fixup; + .word load5,ex_unaligned_fixup; + .word store1,ex_unaligned_fixup; + .word store2,ex_unaligned_fixup; + .word store3,ex_unaligned_fixup; + .word store4,ex_unaligned_fixup; + .word store5,ex_unaligned_fixup; + .word store6,ex_unaligned_fixup; +.previous; .end _unaligned_data_exception #endif /* CONFIG_MMU */ diff --git a/arch/microblaze/mm/fault.c b/arch/microblaze/mm/fault.c index 398c761..d9d249a 100644 --- a/arch/microblaze/mm/fault.c +++ b/arch/microblaze/mm/fault.c @@ -69,7 +69,7 @@ static int store_updates_sp(struct pt_regs *regs) * It is called from do_page_fault above and from some of the procedures * in traps.c. */ -static void bad_page_fault(struct pt_regs *regs, unsigned long address, int sig) +void bad_page_fault(struct pt_regs *regs, unsigned long address, int sig) { const struct exception_table_entry *fixup; /* MS: no context */ -- cgit v1.1 From bfc0ca0d33e24fca5b89acb378a8a9712ffe22b6 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann <arnd@arndb.de> Date: Thu, 18 Jun 2009 19:55:35 +0200 Subject: microblaze: remove sys_ipc The ipc system call is now unused in microblaze, as the system call table points directly to the indidual system calls for IPC. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michal Simek <monstr@monstr.eu> --- arch/microblaze/kernel/sys_microblaze.c | 99 --------------------------------- arch/microblaze/kernel/syscall_table.S | 2 +- 2 files changed, 1 insertion(+), 100 deletions(-) (limited to 'arch') diff --git a/arch/microblaze/kernel/sys_microblaze.c b/arch/microblaze/kernel/sys_microblaze.c index e000bce..b96f168 100644 --- a/arch/microblaze/kernel/sys_microblaze.c +++ b/arch/microblaze/kernel/sys_microblaze.c @@ -33,105 +33,6 @@ #include <linux/unistd.h> #include <asm/syscalls.h> -/* - * sys_ipc() is the de-multiplexer for the SysV IPC calls.. - * - * This is really horribly ugly. This will be remove with new toolchain. - */ -asmlinkage long -sys_ipc(uint call, int first, int second, int third, void *ptr, long fifth) -{ - int version, ret; - - version = call >> 16; /* hack for backward compatibility */ - call &= 0xffff; - - ret = -EINVAL; - switch (call) { - case SEMOP: - ret = sys_semop(first, (struct sembuf *)ptr, second); - break; - case SEMGET: - ret = sys_semget(first, second, third); - break; - case SEMCTL: - { - union semun fourth; - - if (!ptr) - break; - ret = (access_ok(VERIFY_READ, ptr, sizeof(long)) ? 0 : -EFAULT) - || (get_user(fourth.__pad, (void **)ptr)) ; - if (ret) - break; - ret = sys_semctl(first, second, third, fourth); - break; - } - case MSGSND: - ret = sys_msgsnd(first, (struct msgbuf *) ptr, second, third); - break; - case MSGRCV: - switch (version) { - case 0: { - struct ipc_kludge tmp; - - if (!ptr) - break; - ret = (access_ok(VERIFY_READ, ptr, sizeof(tmp)) - ? 0 : -EFAULT) || copy_from_user(&tmp, - (struct ipc_kludge *) ptr, sizeof(tmp)); - if (ret) - break; - ret = sys_msgrcv(first, tmp.msgp, second, tmp.msgtyp, - third); - break; - } - default: - ret = sys_msgrcv(first, (struct msgbuf *) ptr, - second, fifth, third); - break; - } - break; - case MSGGET: - ret = sys_msgget((key_t) first, second); - break; - case MSGCTL: - ret = sys_msgctl(first, second, (struct msqid_ds *) ptr); - break; - case SHMAT: - switch (version) { - default: { - ulong raddr; - ret = access_ok(VERIFY_WRITE, (ulong *) third, - sizeof(ulong)) ? 0 : -EFAULT; - if (ret) - break; - ret = do_shmat(first, (char *) ptr, second, &raddr); - if (ret) - break; - ret = put_user(raddr, (ulong *) third); - break; - } - case 1: /* iBCS2 emulator entry point */ - if (!segment_eq(get_fs(), get_ds())) - break; - ret = do_shmat(first, (char *) ptr, second, - (ulong *) third); - break; - } - break; - case SHMDT: - ret = sys_shmdt((char *)ptr); - break; - case SHMGET: - ret = sys_shmget(first, second, third); - break; - case SHMCTL: - ret = sys_shmctl(first, second, (struct shmid_ds *) ptr); - break; - } - return ret; -} asmlinkage long microblaze_vfork(struct pt_regs *regs) { diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S index 31b32a6..216db81 100644 --- a/arch/microblaze/kernel/syscall_table.S +++ b/arch/microblaze/kernel/syscall_table.S @@ -121,7 +121,7 @@ ENTRY(sys_call_table) .long sys_wait4 .long sys_swapoff /* 115 */ .long sys_sysinfo - .long sys_ipc + .long sys_ni_syscall /* old sys_ipc */ .long sys_fsync .long sys_ni_syscall /* sys_sigreturn_wrapper */ .long sys_clone /* 120 */ -- cgit v1.1 From fadf2e60a6dc7267658fa0c9e3bef13c699c7e1f Mon Sep 17 00:00:00 2001 From: John Williams <john.williams@petalogix.com> Date: Thu, 23 Jul 2009 14:56:49 +1000 Subject: microblaze: Get module loading working New reloc type R_MICROBLAZE_32_PCREL_LO requires a null handler (no work to do). Remove legacy hack for broken linker pre gcc-4.1.1, that required us to extract an offset from the code, add it to the addend, then rewrite the instruction. Fixup the invalid reloc type error output. Boot tested with the xilinx_emaclite ethernet driver. Signed-off-by: John Williams <john.williams@petalogix.com> Signed-off-by: Michal Simek <monstr@monstr.eu> --- arch/microblaze/kernel/module.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/microblaze/kernel/module.c b/arch/microblaze/kernel/module.c index 5141417..93a3871 100644 --- a/arch/microblaze/kernel/module.c +++ b/arch/microblaze/kernel/module.c @@ -57,7 +57,6 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab, Elf32_Rela *rela = (void *)sechdrs[relsec].sh_addr; Elf32_Sym *sym; unsigned long int *location; - unsigned long int locoffs; unsigned long int value; #if __GNUC__ < 4 unsigned long int old_value; @@ -113,10 +112,12 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab, break; case R_MICROBLAZE_64_PCREL: - locoffs = (location[0] & 0xFFFF) << 16 | +#if __GNUC__ < 4 + old_value = (location[0] & 0xFFFF) << 16 | (location[1] & 0xFFFF); - value -= (unsigned long int)(location) + 4 + - locoffs; + value -= old_value; +#endif + value -= (unsigned long int)(location) + 4; location[0] = (location[0] & 0xFFFF0000) | (value >> 16); location[1] = (location[1] & 0xFFFF0000) | @@ -125,6 +126,10 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab, value); break; + case R_MICROBLAZE_32_PCREL_LO: + pr_debug("R_MICROBLAZE_32_PCREL_LO\n"); + break; + case R_MICROBLAZE_NONE: pr_debug("R_MICROBLAZE_NONE\n"); break; @@ -133,7 +138,7 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab, printk(KERN_ERR "module %s: " "Unknown relocation: %u\n", module->name, - ELF32_R_TYPE(rela->r_info)); + ELF32_R_TYPE(rela[i].r_info)); return -ENOEXEC; } } -- cgit v1.1 From 679711b82f010b854c5d4d88472c7a20fdc2b5fe Mon Sep 17 00:00:00 2001 From: Michal Simek <monstr@monstr.eu> Date: Thu, 23 Jul 2009 08:24:47 +0200 Subject: microblaze: Add support for R_MICROBLAZE_64_NONE For example reiserfs use this relocation type. Signed-off-by: Michal Simek <monstr@monstr.eu> --- arch/microblaze/kernel/module.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/microblaze/kernel/module.c b/arch/microblaze/kernel/module.c index 93a3871..5a45b1a 100644 --- a/arch/microblaze/kernel/module.c +++ b/arch/microblaze/kernel/module.c @@ -130,6 +130,10 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab, pr_debug("R_MICROBLAZE_32_PCREL_LO\n"); break; + case R_MICROBLAZE_64_NONE: + pr_debug("R_MICROBLAZE_NONE\n"); + break; + case R_MICROBLAZE_NONE: pr_debug("R_MICROBLAZE_NONE\n"); break; -- cgit v1.1 From 65d3db0601509946fe0c9d2c7b12a5a62ca42e5e Mon Sep 17 00:00:00 2001 From: Michal Simek <monstr@monstr.eu> Date: Fri, 24 Jul 2009 08:11:23 +0200 Subject: microblaze: Typo fix for cpu param inconsistency Signed-off-by: Michal Simek <monstr@monstr.eu> --- arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c | 2 +- arch/microblaze/kernel/cpu/cpuinfo-static.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c b/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c index 153f57c5..c259786 100644 --- a/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c +++ b/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c @@ -22,7 +22,7 @@ #define CI(c, p) { ci->c = PVR_##p(pvr); } #define err_printk(x) \ - early_printk("ERROR: Microblaze " x " - different for PVR and DTS\n"); + early_printk("ERROR: Microblaze " x "-different for PVR and DTS\n"); void set_cpuinfo_pvr_full(struct cpuinfo *ci, struct device_node *cpu) { diff --git a/arch/microblaze/kernel/cpu/cpuinfo-static.c b/arch/microblaze/kernel/cpu/cpuinfo-static.c index 450ca6b..adb448f 100644 --- a/arch/microblaze/kernel/cpu/cpuinfo-static.c +++ b/arch/microblaze/kernel/cpu/cpuinfo-static.c @@ -18,7 +18,7 @@ static const char family_string[] = CONFIG_XILINX_MICROBLAZE0_FAMILY; static const char cpu_ver_string[] = CONFIG_XILINX_MICROBLAZE0_HW_VER; #define err_printk(x) \ - early_printk("ERROR: Microblaze " x "- different for kernel and DTS\n"); + early_printk("ERROR: Microblaze " x "-different for kernel and DTS\n"); void __init set_cpuinfo_static(struct cpuinfo *ci, struct device_node *cpu) { -- cgit v1.1 From 950b260ed21fdb6fa5f18485dabb0b03488431fa Mon Sep 17 00:00:00 2001 From: Sam Ravnborg <sam@ravnborg.org> Date: Fri, 24 Jul 2009 09:04:49 +0200 Subject: microblaze: Makefile cleanup Reviewed the Makefile on request by Michal and this is the resulting changes. o Use ':=' for assignmnet so we do not re-evaluate for each use o Use $(shell echo xxx) to remove "" o Replaced CFLAGS_KERNEL with KBUILD_CFLAGS The settings are equally relevant for modules and the linked kernel o Dropped LDFLAGS_BLOB - it is no longer used o Refactored assignmnets to libs-y and core-y o Use MMU for the MMU specific extension. "MMUEXT" was hurting my eyes and I did not wanted it spread to m68k Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Michal Simek <monstr@monstr.eu> --- arch/microblaze/Makefile | 35 ++++++++++++++++++----------------- arch/microblaze/kernel/Makefile | 2 +- 2 files changed, 19 insertions(+), 18 deletions(-) (limited to 'arch') diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile index d0bcf80..8439598 100644 --- a/arch/microblaze/Makefile +++ b/arch/microblaze/Makefile @@ -6,14 +6,16 @@ endif # What CPU vesion are we building for, and crack it open # as major.minor.rev -CPU_VER=$(subst ",,$(CONFIG_XILINX_MICROBLAZE0_HW_VER) ) -CPU_MAJOR=$(shell echo $(CPU_VER) | cut -d '.' -f 1) -CPU_MINOR=$(shell echo $(CPU_VER) | cut -d '.' -f 2) -CPU_REV=$(shell echo $(CPU_VER) | cut -d '.' -f 3) +CPU_VER := $(shell echo $(CONFIG_XILINX_MICROBLAZE0_HW_VER)) +CPU_MAJOR := $(shell echo $(CPU_VER) | cut -d '.' -f 1) +CPU_MINOR := $(shell echo $(CPU_VER) | cut -d '.' -f 2) +CPU_REV := $(shell echo $(CPU_VER) | cut -d '.' -f 3) export CPU_VER CPU_MAJOR CPU_MINOR CPU_REV # Use cpu-related CONFIG_ vars to set compile options. +# The various CONFIG_XILINX cpu features options are integers 0/1/2... +# rather than bools y/n # Work out HW multipler support. This is icky. # 1. Spartan2 has no HW multiplers. @@ -34,30 +36,29 @@ CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR) += -mxl-pattern-compare CPUFLAGS-1 += $(call cc-option,-mcpu=v$(CPU_VER)) -# The various CONFIG_XILINX cpu features options are integers 0/1/2... -# rather than bools y/n - # r31 holds current when in kernel mode -CFLAGS_KERNEL += -ffixed-r31 $(CPUFLAGS-1) $(CPUFLAGS-2) +KBUILD_KERNEL += -ffixed-r31 $(CPUFLAGS-1) $(CPUFLAGS-2) LDFLAGS := LDFLAGS_vmlinux := -LDFLAGS_BLOB := --format binary --oformat elf32-microblaze -LIBGCC := $(shell $(CC) $(CFLAGS_KERNEL) -print-libgcc-file-name) +LIBGCC := $(shell $(CC) $(KBUILD_KERNEL) -print-libgcc-file-name) -head-y := arch/microblaze/kernel/head.o -libs-y += arch/microblaze/lib/ $(LIBGCC) -core-y += arch/microblaze/kernel/ arch/microblaze/mm/ \ - arch/microblaze/platform/ +head-y := arch/microblaze/kernel/head.o +libs-y += arch/microblaze/lib/ +libs-y += $(LIBGCC) +core-y += arch/microblaze/kernel/ +core-y += arch/microblaze/mm/ +core-y += arch/microblaze/platform/ -boot := arch/$(ARCH)/boot +boot := arch/microblaze/boot # defines filename extension depending memory management type ifeq ($(CONFIG_MMU),) -MMUEXT := -nommu +MMU := -nommu endif -export MMUEXT + +export MMU all: linux.bin diff --git a/arch/microblaze/kernel/Makefile b/arch/microblaze/kernel/Makefile index f4a5e19..d487729 100644 --- a/arch/microblaze/kernel/Makefile +++ b/arch/microblaze/kernel/Makefile @@ -17,4 +17,4 @@ obj-$(CONFIG_HEART_BEAT) += heartbeat.o obj-$(CONFIG_MODULES) += microblaze_ksyms.o module.o obj-$(CONFIG_MMU) += misc.o -obj-y += entry$(MMUEXT).o +obj-y += entry$(MMU).o -- cgit v1.1 From 505d62d073b528859b43bfb463a6ceaf3581469e Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior <bigeasy@breakpoint.cc> Date: Sun, 26 Jul 2009 14:57:54 +0200 Subject: avr32/lib: fix unaligned memcpy() memcpy(p, unaligned, 4..) returns (p + num_of_unaligned_by_copied) instead of p because p is not preserved in the unaligned case. Noticed by Herbert Xu's superior parameter recycling coding technique which let the md4 self-test fail on avr32. Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> --- arch/avr32/lib/memcpy.S | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/avr32/lib/memcpy.S b/arch/avr32/lib/memcpy.S index 0abb261..93e74b6 100644 --- a/arch/avr32/lib/memcpy.S +++ b/arch/avr32/lib/memcpy.S @@ -24,8 +24,8 @@ memcpy: brne 1f /* At this point, "from" is word-aligned */ -2: sub r10, 4 - mov r9, r12 +2: mov r9, r12 +5: sub r10, 4 brlt 4f 3: ld.w r8, r11++ @@ -59,4 +59,13 @@ memcpy: st.b r12++, r8 ld.ub r8, r11++ st.b r12++, r8 - rjmp 2b + mov r8, r12 + add pc, pc, r9 + sub r8, 1 + nop + sub r8, 1 + nop + sub r8, 1 + nop + mov r9, r8 + rjmp 5b -- cgit v1.1 From 251ab1a37d9ba810593d5fbf2482bc4ba773fab2 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior <bigeasy@breakpoint.cc> Date: Sun, 26 Jul 2009 14:58:34 +0200 Subject: avr32/lib: fix unaligned memcpy where len < 4 in case of memcpy(p, unaligned, 1..3) we get 1..3 as the return value instead of p Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> --- arch/avr32/lib/memcpy.S | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/avr32/lib/memcpy.S b/arch/avr32/lib/memcpy.S index 93e74b6..c2ca49d 100644 --- a/arch/avr32/lib/memcpy.S +++ b/arch/avr32/lib/memcpy.S @@ -49,6 +49,7 @@ memcpy: /* Handle unaligned "from" pointer */ 1: sub r10, 4 + movlt r9, r12 brlt 4b add r10, r9 lsl r9, 2 -- cgit v1.1 From 92c548cd35d50df398f442b07021150094578460 Mon Sep 17 00:00:00 2001 From: Ben Nizette <ben@niasdigital.com> Date: Mon, 20 Apr 2009 12:36:53 +1000 Subject: favr32: improve touchscreen response The ezLCD+101 board (to which an favr-32 is fitted) has a long, unshielded, nasty lead between the touch panel and the ads7843 touch controller. In order to get satisfactory response then, we need to employ every noise-reduction trick in the driver's arsenal. After extensive fiddling I've found some good settings: 1) We keep vref on all the time to dramatically reduce settling times (at the cost of a tiny increase in power consumption). 2) Despite 1 the settling time is still non-zero. 500uS is plenty of time for the signals to settle 3) Despite 1 and 2 there's still a little bit of noise around. By setting a pen recheck delay we make the panel feel less touchy and twitchy. Someone with more time and patience myself might be able to tune this numbers further but these settings are now perfectly acceptable for normal use. Tested on ezLCD+101 though should only improve response on other ezLCD+/ favr-32 boards too. Signed-off-by: Ben Nizette <bn@niasdigital.com> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> --- arch/avr32/boards/favr-32/setup.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/avr32/boards/favr-32/setup.c b/arch/avr32/boards/favr-32/setup.c index 46c9b0a..75f19f4 100644 --- a/arch/avr32/boards/favr-32/setup.c +++ b/arch/avr32/boards/favr-32/setup.c @@ -72,6 +72,10 @@ static struct ads7846_platform_data ads7843_data = { .debounce_max = 20, .debounce_rep = 4, .debounce_tol = 5, + + .keep_vref_on = true, + .settle_delay_usecs = 500, + .penirq_recheck_delay_usecs = 100, }; static struct spi_board_info __initdata spi1_board_info[] = { -- cgit v1.1 From c640e1cb45cb9ff6b02f5f130a4f2a58ab9ebe55 Mon Sep 17 00:00:00 2001 From: Tomas Cech <sleep_walker@suse.cz> Date: Mon, 27 Jul 2009 14:16:31 +0100 Subject: ARM: 5623/1: Treo680: ir shutdown typo fix MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit correct GPIO freed in treo680_irda_shutdown() Signed-off-by: Tomáš ?ech <sleep_walker@suse.cz> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> --- arch/arm/mach-pxa/treo680.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-pxa/treo680.c b/arch/arm/mach-pxa/treo680.c index a06f19e..753ec4d 100644 --- a/arch/arm/mach-pxa/treo680.c +++ b/arch/arm/mach-pxa/treo680.c @@ -409,7 +409,7 @@ err1: static void treo680_irda_shutdown(struct device *dev) { - gpio_free(GPIO_NR_TREO680_AMP_EN); + gpio_free(GPIO_NR_TREO680_IR_EN); } static struct pxaficp_platform_data treo680_ficp_info = { -- cgit v1.1 From 9e1b32caa525cb236e80e9c671e179bcecccc657 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt <benh@kernel.crashing.org> Date: Wed, 22 Jul 2009 15:44:28 +1000 Subject: mm: Pass virtual address to [__]p{te,ud,md}_free_tlb() mm: Pass virtual address to [__]p{te,ud,md}_free_tlb() Upcoming paches to support the new 64-bit "BookE" powerpc architecture will need to have the virtual address corresponding to PTE page when freeing it, due to the way the HW table walker works. Basically, the TLB can be loaded with "large" pages that cover the whole virtual space (well, sort-of, half of it actually) represented by a PTE page, and which contain an "indirect" bit indicating that this TLB entry RPN points to an array of PTEs from which the TLB can then create direct entries. Thus, in order to invalidate those when PTE pages are deleted, we need the virtual address to pass to tlbilx or tlbivax instructions. The old trick of sticking it somewhere in the PTE page struct page sucks too much, the address is almost readily available in all call sites and almost everybody implemets these as macros, so we may as well add the argument everywhere. I added it to the pmd and pud variants for consistency. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: David Howells <dhowells@redhat.com> [MN10300 & FRV] Acked-by: Nick Piggin <npiggin@suse.de> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> [s390] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> --- arch/alpha/include/asm/tlb.h | 4 ++-- arch/arm/include/asm/tlb.h | 4 ++-- arch/avr32/include/asm/pgalloc.h | 2 +- arch/cris/include/asm/pgalloc.h | 2 +- arch/frv/include/asm/pgalloc.h | 4 ++-- arch/frv/include/asm/pgtable.h | 2 +- arch/ia64/include/asm/pgalloc.h | 6 +++--- arch/ia64/include/asm/tlb.h | 12 ++++++------ arch/m32r/include/asm/pgalloc.h | 4 ++-- arch/m68k/include/asm/motorola_pgalloc.h | 6 ++++-- arch/m68k/include/asm/sun3_pgalloc.h | 4 ++-- arch/microblaze/include/asm/pgalloc.h | 4 ++-- arch/mips/include/asm/pgalloc.h | 6 +++--- arch/mn10300/include/asm/pgalloc.h | 2 +- arch/parisc/include/asm/tlb.h | 4 ++-- arch/powerpc/include/asm/pgalloc-32.h | 2 +- arch/powerpc/include/asm/pgalloc-64.h | 4 ++-- arch/powerpc/include/asm/pgalloc.h | 6 +++--- arch/powerpc/mm/hugetlbpage.c | 4 ++-- arch/s390/include/asm/tlb.h | 9 ++++++--- arch/sh/include/asm/pgalloc.h | 4 ++-- arch/sh/include/asm/tlb.h | 6 +++--- arch/sparc/include/asm/pgalloc_32.h | 8 ++++---- arch/sparc/include/asm/tlb_64.h | 6 +++--- arch/um/include/asm/pgalloc.h | 4 ++-- arch/um/include/asm/tlb.h | 6 +++--- arch/x86/include/asm/pgalloc.h | 25 ++++++++++++++++++++++--- arch/x86/mm/pgtable.c | 6 +++--- arch/xtensa/include/asm/tlb.h | 2 +- 29 files changed, 91 insertions(+), 67 deletions(-) (limited to 'arch') diff --git a/arch/alpha/include/asm/tlb.h b/arch/alpha/include/asm/tlb.h index c136365..4286675 100644 --- a/arch/alpha/include/asm/tlb.h +++ b/arch/alpha/include/asm/tlb.h @@ -9,7 +9,7 @@ #include <asm-generic/tlb.h> -#define __pte_free_tlb(tlb, pte) pte_free((tlb)->mm, pte) -#define __pmd_free_tlb(tlb, pmd) pmd_free((tlb)->mm, pmd) +#define __pte_free_tlb(tlb, pte, address) pte_free((tlb)->mm, pte) +#define __pmd_free_tlb(tlb, pmd, address) pmd_free((tlb)->mm, pmd) #endif diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h index 321c83e..f41a6f5 100644 --- a/arch/arm/include/asm/tlb.h +++ b/arch/arm/include/asm/tlb.h @@ -102,8 +102,8 @@ tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma) } #define tlb_remove_page(tlb,page) free_page_and_swap_cache(page) -#define pte_free_tlb(tlb, ptep) pte_free((tlb)->mm, ptep) -#define pmd_free_tlb(tlb, pmdp) pmd_free((tlb)->mm, pmdp) +#define pte_free_tlb(tlb, ptep, addr) pte_free((tlb)->mm, ptep) +#define pmd_free_tlb(tlb, pmdp, addr) pmd_free((tlb)->mm, pmdp) #define tlb_migrate_finish(mm) do { } while (0) diff --git a/arch/avr32/include/asm/pgalloc.h b/arch/avr32/include/asm/pgalloc.h index 6408213..92ecd84 100644 --- a/arch/avr32/include/asm/pgalloc.h +++ b/arch/avr32/include/asm/pgalloc.h @@ -83,7 +83,7 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t pte) quicklist_free_page(QUICK_PT, NULL, pte); } -#define __pte_free_tlb(tlb,pte) \ +#define __pte_free_tlb(tlb,pte,addr) \ do { \ pgtable_page_dtor(pte); \ tlb_remove_page((tlb), pte); \ diff --git a/arch/cris/include/asm/pgalloc.h b/arch/cris/include/asm/pgalloc.h index a1ba761..6da975d 100644 --- a/arch/cris/include/asm/pgalloc.h +++ b/arch/cris/include/asm/pgalloc.h @@ -47,7 +47,7 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t pte) __free_page(pte); } -#define __pte_free_tlb(tlb,pte) \ +#define __pte_free_tlb(tlb,pte,address) \ do { \ pgtable_page_dtor(pte); \ tlb_remove_page((tlb), pte); \ diff --git a/arch/frv/include/asm/pgalloc.h b/arch/frv/include/asm/pgalloc.h index 971e6ad..416d19a 100644 --- a/arch/frv/include/asm/pgalloc.h +++ b/arch/frv/include/asm/pgalloc.h @@ -49,7 +49,7 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t pte) __free_page(pte); } -#define __pte_free_tlb(tlb,pte) \ +#define __pte_free_tlb(tlb,pte,address) \ do { \ pgtable_page_dtor(pte); \ tlb_remove_page((tlb),(pte)); \ @@ -62,7 +62,7 @@ do { \ */ #define pmd_alloc_one(mm, addr) ({ BUG(); ((pmd_t *) 2); }) #define pmd_free(mm, x) do { } while (0) -#define __pmd_free_tlb(tlb,x) do { } while (0) +#define __pmd_free_tlb(tlb,x,a) do { } while (0) #endif /* CONFIG_MMU */ diff --git a/arch/frv/include/asm/pgtable.h b/arch/frv/include/asm/pgtable.h index 3323301..22c6069 100644 --- a/arch/frv/include/asm/pgtable.h +++ b/arch/frv/include/asm/pgtable.h @@ -225,7 +225,7 @@ static inline pud_t *pud_offset(pgd_t *pgd, unsigned long address) */ #define pud_alloc_one(mm, address) NULL #define pud_free(mm, x) do { } while (0) -#define __pud_free_tlb(tlb, x) do { } while (0) +#define __pud_free_tlb(tlb, x, address) do { } while (0) /* * The "pud_xxx()" functions here are trivial for a folded two-level diff --git a/arch/ia64/include/asm/pgalloc.h b/arch/ia64/include/asm/pgalloc.h index b9ac1a6..96a8d92 100644 --- a/arch/ia64/include/asm/pgalloc.h +++ b/arch/ia64/include/asm/pgalloc.h @@ -48,7 +48,7 @@ static inline void pud_free(struct mm_struct *mm, pud_t *pud) { quicklist_free(0, NULL, pud); } -#define __pud_free_tlb(tlb, pud) pud_free((tlb)->mm, pud) +#define __pud_free_tlb(tlb, pud, address) pud_free((tlb)->mm, pud) #endif /* CONFIG_PGTABLE_4 */ static inline void @@ -67,7 +67,7 @@ static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd) quicklist_free(0, NULL, pmd); } -#define __pmd_free_tlb(tlb, pmd) pmd_free((tlb)->mm, pmd) +#define __pmd_free_tlb(tlb, pmd, address) pmd_free((tlb)->mm, pmd) static inline void pmd_populate(struct mm_struct *mm, pmd_t * pmd_entry, pgtable_t pte) @@ -117,6 +117,6 @@ static inline void check_pgt_cache(void) quicklist_trim(0, NULL, 25, 16); } -#define __pte_free_tlb(tlb, pte) pte_free((tlb)->mm, pte) +#define __pte_free_tlb(tlb, pte, address) pte_free((tlb)->mm, pte) #endif /* _ASM_IA64_PGALLOC_H */ diff --git a/arch/ia64/include/asm/tlb.h b/arch/ia64/include/asm/tlb.h index 20d8a39..85d965c 100644 --- a/arch/ia64/include/asm/tlb.h +++ b/arch/ia64/include/asm/tlb.h @@ -236,22 +236,22 @@ do { \ __tlb_remove_tlb_entry(tlb, ptep, addr); \ } while (0) -#define pte_free_tlb(tlb, ptep) \ +#define pte_free_tlb(tlb, ptep, address) \ do { \ tlb->need_flush = 1; \ - __pte_free_tlb(tlb, ptep); \ + __pte_free_tlb(tlb, ptep, address); \ } while (0) -#define pmd_free_tlb(tlb, ptep) \ +#define pmd_free_tlb(tlb, ptep, address) \ do { \ tlb->need_flush = 1; \ - __pmd_free_tlb(tlb, ptep); \ + __pmd_free_tlb(tlb, ptep, address); \ } while (0) -#define pud_free_tlb(tlb, pudp) \ +#define pud_free_tlb(tlb, pudp, address) \ do { \ tlb->need_flush = 1; \ - __pud_free_tlb(tlb, pudp); \ + __pud_free_tlb(tlb, pudp, address); \ } while (0) #endif /* _ASM_IA64_TLB_H */ diff --git a/arch/m32r/include/asm/pgalloc.h b/arch/m32r/include/asm/pgalloc.h index f11a2b9..0fc7361 100644 --- a/arch/m32r/include/asm/pgalloc.h +++ b/arch/m32r/include/asm/pgalloc.h @@ -58,7 +58,7 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t pte) __free_page(pte); } -#define __pte_free_tlb(tlb, pte) pte_free((tlb)->mm, (pte)) +#define __pte_free_tlb(tlb, pte, addr) pte_free((tlb)->mm, (pte)) /* * allocating and freeing a pmd is trivial: the 1-entry pmd is @@ -68,7 +68,7 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t pte) #define pmd_alloc_one(mm, addr) ({ BUG(); ((pmd_t *)2); }) #define pmd_free(mm, x) do { } while (0) -#define __pmd_free_tlb(tlb, x) do { } while (0) +#define __pmd_free_tlb(tlb, x, addr) do { } while (0) #define pgd_populate(mm, pmd, pte) BUG() #define check_pgt_cache() do { } while (0) diff --git a/arch/m68k/include/asm/motorola_pgalloc.h b/arch/m68k/include/asm/motorola_pgalloc.h index d08bf62..15ee4c7 100644 --- a/arch/m68k/include/asm/motorola_pgalloc.h +++ b/arch/m68k/include/asm/motorola_pgalloc.h @@ -54,7 +54,8 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t page) __free_page(page); } -static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t page) +static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t page, + unsigned long address) { pgtable_page_dtor(page); cache_page(kmap(page)); @@ -73,7 +74,8 @@ static inline int pmd_free(struct mm_struct *mm, pmd_t *pmd) return free_pointer_table(pmd); } -static inline int __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd) +static inline int __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd, + unsigned long address) { return free_pointer_table(pmd); } diff --git a/arch/m68k/include/asm/sun3_pgalloc.h b/arch/m68k/include/asm/sun3_pgalloc.h index d4c83f1..48d80d5 100644 --- a/arch/m68k/include/asm/sun3_pgalloc.h +++ b/arch/m68k/include/asm/sun3_pgalloc.h @@ -32,7 +32,7 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t page) __free_page(page); } -#define __pte_free_tlb(tlb,pte) \ +#define __pte_free_tlb(tlb,pte,addr) \ do { \ pgtable_page_dtor(pte); \ tlb_remove_page((tlb), pte); \ @@ -80,7 +80,7 @@ static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, pgtable_t page * inside the pgd, so has no extra memory associated with it. */ #define pmd_free(mm, x) do { } while (0) -#define __pmd_free_tlb(tlb, x) do { } while (0) +#define __pmd_free_tlb(tlb, x, addr) do { } while (0) static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd) { diff --git a/arch/microblaze/include/asm/pgalloc.h b/arch/microblaze/include/asm/pgalloc.h index 59a757e..b0131da 100644 --- a/arch/microblaze/include/asm/pgalloc.h +++ b/arch/microblaze/include/asm/pgalloc.h @@ -180,7 +180,7 @@ extern inline void pte_free(struct mm_struct *mm, struct page *ptepage) __free_page(ptepage); } -#define __pte_free_tlb(tlb, pte) pte_free((tlb)->mm, (pte)) +#define __pte_free_tlb(tlb, pte, addr) pte_free((tlb)->mm, (pte)) #define pmd_populate(mm, pmd, pte) (pmd_val(*(pmd)) = page_address(pte)) @@ -193,7 +193,7 @@ extern inline void pte_free(struct mm_struct *mm, struct page *ptepage) */ #define pmd_alloc_one(mm, address) ({ BUG(); ((pmd_t *)2); }) /*#define pmd_free(mm, x) do { } while (0)*/ -#define __pmd_free_tlb(tlb, x) do { } while (0) +#define __pmd_free_tlb(tlb, x, addr) do { } while (0) #define pgd_populate(mm, pmd, pte) BUG() extern int do_check_pgt_cache(int, int); diff --git a/arch/mips/include/asm/pgalloc.h b/arch/mips/include/asm/pgalloc.h index 1275831..f705735 100644 --- a/arch/mips/include/asm/pgalloc.h +++ b/arch/mips/include/asm/pgalloc.h @@ -98,7 +98,7 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t pte) __free_pages(pte, PTE_ORDER); } -#define __pte_free_tlb(tlb,pte) \ +#define __pte_free_tlb(tlb,pte,address) \ do { \ pgtable_page_dtor(pte); \ tlb_remove_page((tlb), pte); \ @@ -111,7 +111,7 @@ do { \ * inside the pgd, so has no extra memory associated with it. */ #define pmd_free(mm, x) do { } while (0) -#define __pmd_free_tlb(tlb, x) do { } while (0) +#define __pmd_free_tlb(tlb, x, addr) do { } while (0) #endif @@ -132,7 +132,7 @@ static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd) free_pages((unsigned long)pmd, PMD_ORDER); } -#define __pmd_free_tlb(tlb, x) pmd_free((tlb)->mm, x) +#define __pmd_free_tlb(tlb, x, addr) pmd_free((tlb)->mm, x) #endif diff --git a/arch/mn10300/include/asm/pgalloc.h b/arch/mn10300/include/asm/pgalloc.h index ec057e1..a19f113 100644 --- a/arch/mn10300/include/asm/pgalloc.h +++ b/arch/mn10300/include/asm/pgalloc.h @@ -51,6 +51,6 @@ static inline void pte_free(struct mm_struct *mm, struct page *pte) } -#define __pte_free_tlb(tlb, pte) tlb_remove_page((tlb), (pte)) +#define __pte_free_tlb(tlb, pte, addr) tlb_remove_page((tlb), (pte)) #endif /* _ASM_PGALLOC_H */ diff --git a/arch/parisc/include/asm/tlb.h b/arch/parisc/include/asm/tlb.h index 383b1db..0792490 100644 --- a/arch/parisc/include/asm/tlb.h +++ b/arch/parisc/include/asm/tlb.h @@ -21,7 +21,7 @@ do { if (!(tlb)->fullmm) \ #include <asm-generic/tlb.h> -#define __pmd_free_tlb(tlb, pmd) pmd_free((tlb)->mm, pmd) -#define __pte_free_tlb(tlb, pte) pte_free((tlb)->mm, pte) +#define __pmd_free_tlb(tlb, pmd, addr) pmd_free((tlb)->mm, pmd) +#define __pte_free_tlb(tlb, pte, addr) pte_free((tlb)->mm, pte) #endif diff --git a/arch/powerpc/include/asm/pgalloc-32.h b/arch/powerpc/include/asm/pgalloc-32.h index 0815eb4..c9500d6 100644 --- a/arch/powerpc/include/asm/pgalloc-32.h +++ b/arch/powerpc/include/asm/pgalloc-32.h @@ -16,7 +16,7 @@ extern void pgd_free(struct mm_struct *mm, pgd_t *pgd); */ /* #define pmd_alloc_one(mm,address) ({ BUG(); ((pmd_t *)2); }) */ #define pmd_free(mm, x) do { } while (0) -#define __pmd_free_tlb(tlb,x) do { } while (0) +#define __pmd_free_tlb(tlb,x,a) do { } while (0) /* #define pgd_populate(mm, pmd, pte) BUG() */ #ifndef CONFIG_BOOKE diff --git a/arch/powerpc/include/asm/pgalloc-64.h b/arch/powerpc/include/asm/pgalloc-64.h index afda2bd..e6f069c 100644 --- a/arch/powerpc/include/asm/pgalloc-64.h +++ b/arch/powerpc/include/asm/pgalloc-64.h @@ -118,11 +118,11 @@ static inline void pgtable_free(pgtable_free_t pgf) kmem_cache_free(pgtable_cache[cachenum], p); } -#define __pmd_free_tlb(tlb, pmd) \ +#define __pmd_free_tlb(tlb, pmd,addr) \ pgtable_free_tlb(tlb, pgtable_free_cache(pmd, \ PMD_CACHE_NUM, PMD_TABLE_SIZE-1)) #ifndef CONFIG_PPC_64K_PAGES -#define __pud_free_tlb(tlb, pud) \ +#define __pud_free_tlb(tlb, pud, addr) \ pgtable_free_tlb(tlb, pgtable_free_cache(pud, \ PUD_CACHE_NUM, PUD_TABLE_SIZE-1)) #endif /* CONFIG_PPC_64K_PAGES */ diff --git a/arch/powerpc/include/asm/pgalloc.h b/arch/powerpc/include/asm/pgalloc.h index 5d84802..1730e5e 100644 --- a/arch/powerpc/include/asm/pgalloc.h +++ b/arch/powerpc/include/asm/pgalloc.h @@ -38,14 +38,14 @@ static inline pgtable_free_t pgtable_free_cache(void *p, int cachenum, extern void pgtable_free_tlb(struct mmu_gather *tlb, pgtable_free_t pgf); #ifdef CONFIG_SMP -#define __pte_free_tlb(tlb,ptepage) \ +#define __pte_free_tlb(tlb,ptepage,address) \ do { \ pgtable_page_dtor(ptepage); \ pgtable_free_tlb(tlb, pgtable_free_cache(page_address(ptepage), \ - PTE_NONCACHE_NUM, PTE_TABLE_SIZE-1)); \ + PTE_NONCACHE_NUM, PTE_TABLE_SIZE-1)); \ } while (0) #else -#define __pte_free_tlb(tlb, pte) pte_free((tlb)->mm, (pte)) +#define __pte_free_tlb(tlb, pte, address) pte_free((tlb)->mm, (pte)) #endif diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index 9920d6a..c46ef2f 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -305,7 +305,7 @@ static void hugetlb_free_pmd_range(struct mmu_gather *tlb, pud_t *pud, pmd = pmd_offset(pud, start); pud_clear(pud); - pmd_free_tlb(tlb, pmd); + pmd_free_tlb(tlb, pmd, start); } static void hugetlb_free_pud_range(struct mmu_gather *tlb, pgd_t *pgd, @@ -348,7 +348,7 @@ static void hugetlb_free_pud_range(struct mmu_gather *tlb, pgd_t *pgd, pud = pud_offset(pgd, start); pgd_clear(pgd); - pud_free_tlb(tlb, pud); + pud_free_tlb(tlb, pud, start); } /* diff --git a/arch/s390/include/asm/tlb.h b/arch/s390/include/asm/tlb.h index 3d8a96d..81150b0 100644 --- a/arch/s390/include/asm/tlb.h +++ b/arch/s390/include/asm/tlb.h @@ -96,7 +96,8 @@ static inline void tlb_remove_page(struct mmu_gather *tlb, struct page *page) * pte_free_tlb frees a pte table and clears the CRSTE for the * page table from the tlb. */ -static inline void pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte) +static inline void pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte, + unsigned long address) { if (!tlb->fullmm) { tlb->array[tlb->nr_ptes++] = pte; @@ -113,7 +114,8 @@ static inline void pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte) * as the pgd. pmd_free_tlb checks the asce_limit against 2GB * to avoid the double free of the pmd in this case. */ -static inline void pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd) +static inline void pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd, + unsigned long address) { #ifdef __s390x__ if (tlb->mm->context.asce_limit <= (1UL << 31)) @@ -134,7 +136,8 @@ static inline void pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd) * as the pgd. pud_free_tlb checks the asce_limit against 4TB * to avoid the double free of the pud in this case. */ -static inline void pud_free_tlb(struct mmu_gather *tlb, pud_t *pud) +static inline void pud_free_tlb(struct mmu_gather *tlb, pud_t *pud, + unsigned long address) { #ifdef __s390x__ if (tlb->mm->context.asce_limit <= (1UL << 42)) diff --git a/arch/sh/include/asm/pgalloc.h b/arch/sh/include/asm/pgalloc.h index 84dd2db..89a4827 100644 --- a/arch/sh/include/asm/pgalloc.h +++ b/arch/sh/include/asm/pgalloc.h @@ -73,7 +73,7 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t pte) quicklist_free_page(QUICK_PT, NULL, pte); } -#define __pte_free_tlb(tlb,pte) \ +#define __pte_free_tlb(tlb,pte,addr) \ do { \ pgtable_page_dtor(pte); \ tlb_remove_page((tlb), (pte)); \ @@ -85,7 +85,7 @@ do { \ */ #define pmd_free(mm, x) do { } while (0) -#define __pmd_free_tlb(tlb,x) do { } while (0) +#define __pmd_free_tlb(tlb,x,addr) do { } while (0) static inline void check_pgt_cache(void) { diff --git a/arch/sh/include/asm/tlb.h b/arch/sh/include/asm/tlb.h index 9c16f73..da8fe7a 100644 --- a/arch/sh/include/asm/tlb.h +++ b/arch/sh/include/asm/tlb.h @@ -91,9 +91,9 @@ tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma) } #define tlb_remove_page(tlb,page) free_page_and_swap_cache(page) -#define pte_free_tlb(tlb, ptep) pte_free((tlb)->mm, ptep) -#define pmd_free_tlb(tlb, pmdp) pmd_free((tlb)->mm, pmdp) -#define pud_free_tlb(tlb, pudp) pud_free((tlb)->mm, pudp) +#define pte_free_tlb(tlb, ptep, addr) pte_free((tlb)->mm, ptep) +#define pmd_free_tlb(tlb, pmdp, addr) pmd_free((tlb)->mm, pmdp) +#define pud_free_tlb(tlb, pudp, addr) pud_free((tlb)->mm, pudp) #define tlb_migrate_finish(mm) do { } while (0) diff --git a/arch/sparc/include/asm/pgalloc_32.h b/arch/sparc/include/asm/pgalloc_32.h index 681582d..ca2b344 100644 --- a/arch/sparc/include/asm/pgalloc_32.h +++ b/arch/sparc/include/asm/pgalloc_32.h @@ -44,8 +44,8 @@ BTFIXUPDEF_CALL(pmd_t *, pmd_alloc_one, struct mm_struct *, unsigned long) BTFIXUPDEF_CALL(void, free_pmd_fast, pmd_t *) #define free_pmd_fast(pmd) BTFIXUP_CALL(free_pmd_fast)(pmd) -#define pmd_free(mm, pmd) free_pmd_fast(pmd) -#define __pmd_free_tlb(tlb, pmd) pmd_free((tlb)->mm, pmd) +#define pmd_free(mm, pmd) free_pmd_fast(pmd) +#define __pmd_free_tlb(tlb, pmd, addr) pmd_free((tlb)->mm, pmd) BTFIXUPDEF_CALL(void, pmd_populate, pmd_t *, struct page *) #define pmd_populate(MM, PMD, PTE) BTFIXUP_CALL(pmd_populate)(PMD, PTE) @@ -62,7 +62,7 @@ BTFIXUPDEF_CALL(void, free_pte_fast, pte_t *) #define pte_free_kernel(mm, pte) BTFIXUP_CALL(free_pte_fast)(pte) BTFIXUPDEF_CALL(void, pte_free, pgtable_t ) -#define pte_free(mm, pte) BTFIXUP_CALL(pte_free)(pte) -#define __pte_free_tlb(tlb, pte) pte_free((tlb)->mm, pte) +#define pte_free(mm, pte) BTFIXUP_CALL(pte_free)(pte) +#define __pte_free_tlb(tlb, pte, addr) pte_free((tlb)->mm, pte) #endif /* _SPARC_PGALLOC_H */ diff --git a/arch/sparc/include/asm/tlb_64.h b/arch/sparc/include/asm/tlb_64.h index ee38e73..dca406b 100644 --- a/arch/sparc/include/asm/tlb_64.h +++ b/arch/sparc/include/asm/tlb_64.h @@ -100,9 +100,9 @@ static inline void tlb_remove_page(struct mmu_gather *mp, struct page *page) } #define tlb_remove_tlb_entry(mp,ptep,addr) do { } while (0) -#define pte_free_tlb(mp, ptepage) pte_free((mp)->mm, ptepage) -#define pmd_free_tlb(mp, pmdp) pmd_free((mp)->mm, pmdp) -#define pud_free_tlb(tlb,pudp) __pud_free_tlb(tlb,pudp) +#define pte_free_tlb(mp, ptepage, addr) pte_free((mp)->mm, ptepage) +#define pmd_free_tlb(mp, pmdp, addr) pmd_free((mp)->mm, pmdp) +#define pud_free_tlb(tlb,pudp, addr) __pud_free_tlb(tlb,pudp,addr) #define tlb_migrate_finish(mm) do { } while (0) #define tlb_start_vma(tlb, vma) do { } while (0) diff --git a/arch/um/include/asm/pgalloc.h b/arch/um/include/asm/pgalloc.h index 7189843..32c8ce4 100644 --- a/arch/um/include/asm/pgalloc.h +++ b/arch/um/include/asm/pgalloc.h @@ -40,7 +40,7 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t pte) __free_page(pte); } -#define __pte_free_tlb(tlb,pte) \ +#define __pte_free_tlb(tlb,pte, address) \ do { \ pgtable_page_dtor(pte); \ tlb_remove_page((tlb),(pte)); \ @@ -53,7 +53,7 @@ static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd) free_page((unsigned long)pmd); } -#define __pmd_free_tlb(tlb,x) tlb_remove_page((tlb),virt_to_page(x)) +#define __pmd_free_tlb(tlb,x, address) tlb_remove_page((tlb),virt_to_page(x)) #endif #define check_pgt_cache() do { } while (0) diff --git a/arch/um/include/asm/tlb.h b/arch/um/include/asm/tlb.h index 5240fa1..660caed 100644 --- a/arch/um/include/asm/tlb.h +++ b/arch/um/include/asm/tlb.h @@ -116,11 +116,11 @@ static inline void tlb_remove_page(struct mmu_gather *tlb, struct page *page) __tlb_remove_tlb_entry(tlb, ptep, address); \ } while (0) -#define pte_free_tlb(tlb, ptep) __pte_free_tlb(tlb, ptep) +#define pte_free_tlb(tlb, ptep, addr) __pte_free_tlb(tlb, ptep, addr) -#define pud_free_tlb(tlb, pudp) __pud_free_tlb(tlb, pudp) +#define pud_free_tlb(tlb, pudp, addr) __pud_free_tlb(tlb, pudp, addr) -#define pmd_free_tlb(tlb, pmdp) __pmd_free_tlb(tlb, pmdp) +#define pmd_free_tlb(tlb, pmdp, addr) __pmd_free_tlb(tlb, pmdp, addr) #define tlb_migrate_finish(mm) do {} while (0) diff --git a/arch/x86/include/asm/pgalloc.h b/arch/x86/include/asm/pgalloc.h index dd14c54..0e8c2a0 100644 --- a/arch/x86/include/asm/pgalloc.h +++ b/arch/x86/include/asm/pgalloc.h @@ -46,7 +46,13 @@ static inline void pte_free(struct mm_struct *mm, struct page *pte) __free_page(pte); } -extern void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte); +extern void ___pte_free_tlb(struct mmu_gather *tlb, struct page *pte); + +static inline void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte, + unsigned long address) +{ + ___pte_free_tlb(tlb, pte); +} static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, pte_t *pte) @@ -78,7 +84,13 @@ static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd) free_page((unsigned long)pmd); } -extern void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd); +extern void ___pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd); + +static inline void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd, + unsigned long adddress) +{ + ___pmd_free_tlb(tlb, pmd); +} #ifdef CONFIG_X86_PAE extern void pud_populate(struct mm_struct *mm, pud_t *pudp, pmd_t *pmd); @@ -108,7 +120,14 @@ static inline void pud_free(struct mm_struct *mm, pud_t *pud) free_page((unsigned long)pud); } -extern void __pud_free_tlb(struct mmu_gather *tlb, pud_t *pud); +extern void ___pud_free_tlb(struct mmu_gather *tlb, pud_t *pud); + +static inline void __pud_free_tlb(struct mmu_gather *tlb, pud_t *pud, + unsigned long address) +{ + ___pud_free_tlb(tlb, pud); +} + #endif /* PAGETABLE_LEVELS > 3 */ #endif /* PAGETABLE_LEVELS > 2 */ diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c index 8e43bdd..af8f965 100644 --- a/arch/x86/mm/pgtable.c +++ b/arch/x86/mm/pgtable.c @@ -25,7 +25,7 @@ pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address) return pte; } -void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte) +void ___pte_free_tlb(struct mmu_gather *tlb, struct page *pte) { pgtable_page_dtor(pte); paravirt_release_pte(page_to_pfn(pte)); @@ -33,14 +33,14 @@ void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte) } #if PAGETABLE_LEVELS > 2 -void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd) +void ___pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd) { paravirt_release_pmd(__pa(pmd) >> PAGE_SHIFT); tlb_remove_page(tlb, virt_to_page(pmd)); } #if PAGETABLE_LEVELS > 3 -void __pud_free_tlb(struct mmu_gather *tlb, pud_t *pud) +void ___pud_free_tlb(struct mmu_gather *tlb, pud_t *pud) { paravirt_release_pud(__pa(pud) >> PAGE_SHIFT); tlb_remove_page(tlb, virt_to_page(pud)); diff --git a/arch/xtensa/include/asm/tlb.h b/arch/xtensa/include/asm/tlb.h index 31c220f..0d766f9 100644 --- a/arch/xtensa/include/asm/tlb.h +++ b/arch/xtensa/include/asm/tlb.h @@ -42,6 +42,6 @@ #include <asm-generic/tlb.h> -#define __pte_free_tlb(tlb, pte) pte_free((tlb)->mm, pte) +#define __pte_free_tlb(tlb, pte, address) pte_free((tlb)->mm, pte) #endif /* _XTENSA_TLB_H */ -- cgit v1.1 From 0e83815be719d3391bf5ea24b7fe696c07dbd417 Mon Sep 17 00:00:00 2001 From: Robert Richter <robert.richter@amd.com> Date: Mon, 27 Jul 2009 19:43:52 +0200 Subject: x86: fix section mismatch for i386 init code Startup code for i386 in arch/x86/kernel/head_32.S is using the reference variable initial_code that is located in the .cpuinit.data section. If CONFIG_HOTPLUG_CPU is enabled, startup code is not in an init section and can be called later too. In this case the reference initial_code must be kept too. This patch fixes this. See below for the section mismatch warning. WARNING: vmlinux.o(.cpuinit.data+0x0): Section mismatch in reference from the variable initial_code to the function .init.text:i386_start_kernel() The variable __cpuinitdata initial_code references a function __init i386_start_kernel(). If i386_start_kernel is only used by initial_code then annotate i386_start_kernel with a matching annotation. Signed-off-by: Robert Richter <robert.richter@amd.com> LKML-Reference: <1248716632-26844-1-git-send-email-robert.richter@amd.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> --- arch/x86/kernel/head_32.S | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S index 8663afb..0d98a01 100644 --- a/arch/x86/kernel/head_32.S +++ b/arch/x86/kernel/head_32.S @@ -602,7 +602,11 @@ ignore_int: #endif iret -.section .cpuinit.data,"wa" +#ifndef CONFIG_HOTPLUG_CPU + __CPUINITDATA +#else + __REFDATA +#endif .align 4 ENTRY(initial_code) .long i386_start_kernel -- cgit v1.1 From 4733fd328f14280900435d9dbae1487d110a4d56 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt <benh@kernel.crashing.org> Date: Tue, 28 Jul 2009 10:16:48 +1000 Subject: mm: Remove duplicate definitions in MIPS and SH Those definitions are already provided by asm-generic Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> --- arch/mips/include/asm/pgalloc.h | 11 ----------- arch/sh/include/asm/pgalloc.h | 8 -------- 2 files changed, 19 deletions(-) (limited to 'arch') diff --git a/arch/mips/include/asm/pgalloc.h b/arch/mips/include/asm/pgalloc.h index f705735..3738f4b4 100644 --- a/arch/mips/include/asm/pgalloc.h +++ b/arch/mips/include/asm/pgalloc.h @@ -104,17 +104,6 @@ do { \ tlb_remove_page((tlb), pte); \ } while (0) -#ifdef CONFIG_32BIT - -/* - * allocating and freeing a pmd is trivial: the 1-entry pmd is - * inside the pgd, so has no extra memory associated with it. - */ -#define pmd_free(mm, x) do { } while (0) -#define __pmd_free_tlb(tlb, x, addr) do { } while (0) - -#endif - #ifdef CONFIG_64BIT static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address) diff --git a/arch/sh/include/asm/pgalloc.h b/arch/sh/include/asm/pgalloc.h index 89a4827..63ca37b 100644 --- a/arch/sh/include/asm/pgalloc.h +++ b/arch/sh/include/asm/pgalloc.h @@ -79,14 +79,6 @@ do { \ tlb_remove_page((tlb), (pte)); \ } while (0) -/* - * allocating and freeing a pmd is trivial: the 1-entry pmd is - * inside the pgd, so has no extra memory associated with it. - */ - -#define pmd_free(mm, x) do { } while (0) -#define __pmd_free_tlb(tlb,x,addr) do { } while (0) - static inline void check_pgt_cache(void) { quicklist_trim(QUICK_PGD, NULL, 25, 16); -- cgit v1.1 From 9a926d86b29a25456f1dd8c9df938e151b1c3978 Mon Sep 17 00:00:00 2001 From: "David S. Miller" <davem@davemloft.net> Date: Mon, 27 Jul 2009 18:10:28 -0700 Subject: sparc64: Sign extend length arg to truncate syscalls when compat. The first thing sys_truncate() and sys_ftruncate() do is sign extend the unsigned length arg to a signed type. Thanks to Benjamin Herrenschmidt for the tip. Signed-off-by: David S. Miller <davem@davemloft.net> --- arch/sparc/kernel/sys32.S | 2 ++ arch/sparc/kernel/systbls_64.S | 4 ++-- 2 files changed, 4 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/sparc/kernel/sys32.S b/arch/sparc/kernel/sys32.S index f061c4d..577f8fa 100644 --- a/arch/sparc/kernel/sys32.S +++ b/arch/sparc/kernel/sys32.S @@ -138,6 +138,8 @@ SIGN2(sys32_splice, sys_splice, %o0, %o1) SIGN2(sys32_sync_file_range, compat_sync_file_range, %o0, %o5) SIGN2(sys32_tee, sys_tee, %o0, %o1) SIGN1(sys32_vmsplice, compat_sys_vmsplice, %o0) +SIGN1(sys32_truncate, sys_truncate, %o1) +SIGN1(sys32_ftruncate, sys_ftruncate, %o1) .globl sys32_mmap2 sys32_mmap2: diff --git a/arch/sparc/kernel/systbls_64.S b/arch/sparc/kernel/systbls_64.S index 6b3ee88..2ee7250 100644 --- a/arch/sparc/kernel/systbls_64.S +++ b/arch/sparc/kernel/systbls_64.S @@ -43,8 +43,8 @@ sys_call_table32: /*110*/ .word sys_setresgid, sys_getresgid, sys_setregid, sys_nis_syscall, sys_nis_syscall .word sys32_getgroups, compat_sys_gettimeofday, sys32_getrusage, sys_nis_syscall, sys_getcwd /*120*/ .word compat_sys_readv, compat_sys_writev, compat_sys_settimeofday, sys_fchown16, sys_fchmod - .word sys_nis_syscall, sys_setreuid16, sys_setregid16, sys_rename, sys_truncate -/*130*/ .word sys_ftruncate, sys_flock, compat_sys_lstat64, sys_nis_syscall, sys_nis_syscall + .word sys_nis_syscall, sys_setreuid16, sys_setregid16, sys_rename, sys32_truncate +/*130*/ .word sys32_ftruncate, sys_flock, compat_sys_lstat64, sys_nis_syscall, sys_nis_syscall .word sys_nis_syscall, sys32_mkdir, sys_rmdir, compat_sys_utimes, compat_sys_stat64 /*140*/ .word sys32_sendfile64, sys_nis_syscall, sys32_futex, sys_gettid, compat_sys_getrlimit .word compat_sys_setrlimit, sys_pivot_root, sys32_prctl, sys_pciconfig_read, sys_pciconfig_write -- cgit v1.1 From 8666f8deec75a8dce15edd35ec33d29ef79cdb08 Mon Sep 17 00:00:00 2001 From: Sascha Hauer <s.hauer@pengutronix.de> Date: Fri, 24 Jul 2009 17:30:50 +0200 Subject: mx27 defconfig update - enable MX27_3DS and MX27LITE Board - enable MXC nand driver - enable UBI support Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> --- arch/arm/configs/mx27_defconfig | 270 +++++++++++++++++++++++++++------------- 1 file changed, 185 insertions(+), 85 deletions(-) (limited to 'arch') diff --git a/arch/arm/configs/mx27_defconfig b/arch/arm/configs/mx27_defconfig index 083516c..75263a8 100644 --- a/arch/arm/configs/mx27_defconfig +++ b/arch/arm/configs/mx27_defconfig @@ -1,15 +1,15 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc1 -# Wed Apr 8 10:18:06 2009 +# Linux kernel version: 2.6.31-rc4 +# Fri Jul 24 16:08:06 2009 # CONFIG_ARM=y +CONFIG_HAVE_PWM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -18,14 +18,13 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_ARCH_MTD_XIP=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -85,7 +84,12 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_COMPAT_BRK is not set CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -99,6 +103,12 @@ CONFIG_KPROBES=y CONFIG_KRETPROBES=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set # CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y @@ -111,7 +121,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -138,13 +148,14 @@ CONFIG_FREEZER=y # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set +CONFIG_ARCH_MXC=y +# CONFIG_ARCH_STMP3XXX is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set @@ -153,25 +164,25 @@ CONFIG_FREEZER=y # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set # CONFIG_ARCH_KIRKWOOD is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set # CONFIG_ARCH_LOKI is not set # CONFIG_ARCH_MV78XX0 is not set -CONFIG_ARCH_MXC=y # CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_MSM is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM is not set -# CONFIG_ARCH_W90X900 is not set # # Freescale MXC Implementations @@ -188,6 +199,8 @@ CONFIG_MACH_MX27=y CONFIG_MACH_MX27ADS=y CONFIG_MACH_PCM038=y CONFIG_MACH_PCM970_BASEBOARD=y +CONFIG_MACH_MX27_3DS=y +CONFIG_MACH_MX27LITE=y CONFIG_MXC_IRQ_PRIOR=y CONFIG_MXC_PWM=y @@ -213,7 +226,6 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_DCACHE_WRITETHROUGH is not set # CONFIG_CPU_CACHE_ROUND_ROBIN is not set -# CONFIG_OUTER_CACHE is not set CONFIG_COMMON_CLKDEV=y # @@ -238,7 +250,6 @@ CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y CONFIG_OABI_COMPAT=y -CONFIG_ARCH_FLATMEM_HAS_HOLES=y # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set # CONFIG_HIGHMEM is not set @@ -253,10 +264,11 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set # # Boot options @@ -361,6 +373,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -474,7 +487,16 @@ CONFIG_MTD_PHYSMAP=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_NAND is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +CONFIG_MTD_NAND_MXC=y # CONFIG_MTD_ONENAND is not set # @@ -485,7 +507,15 @@ CONFIG_MTD_PHYSMAP=y # # UBI - Unsorted block images # -# CONFIG_MTD_UBI is not set +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_RESERVE=1 +# CONFIG_MTD_UBI_GLUEBI is not set + +# +# UBI debugging options +# +# CONFIG_MTD_UBI_DEBUG is not set # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set @@ -494,7 +524,21 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set -# CONFIG_MISC_DEVICES is not set +# CONFIG_MG_DISK is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +CONFIG_EEPROM_AT24=y +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -508,7 +552,6 @@ CONFIG_HAVE_IDE=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -534,6 +577,8 @@ CONFIG_NET_ETHERNET=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set CONFIG_FEC=y # CONFIG_FEC2 is not set # CONFIG_NETDEV_1000 is not set @@ -580,6 +625,11 @@ CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_TABLET is not set CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_AD7877 is not set +# CONFIG_TOUCHSCREEN_AD7879_I2C is not set +# CONFIG_TOUCHSCREEN_AD7879_SPI is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_EETI is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set @@ -592,6 +642,7 @@ CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_TOUCHWIN is not set # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set # CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_TOUCHSCREEN_W90X900 is not set # CONFIG_INPUT_MISC is not set # @@ -644,6 +695,7 @@ CONFIG_I2C_HELPER_AUTO=y # # I2C system bus drivers (mostly embedded / system-on-chip) # +# CONFIG_I2C_DESIGNWARE is not set # CONFIG_I2C_GPIO is not set CONFIG_I2C_IMX=y # CONFIG_I2C_OCORES is not set @@ -668,7 +720,6 @@ CONFIG_I2C_IMX=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -719,6 +770,7 @@ CONFIG_W1=y # # CONFIG_W1_MASTER_DS2482 is not set CONFIG_W1_MASTER_MXC=y +# CONFIG_W1_MASTER_DS1WM is not set # CONFIG_W1_MASTER_GPIO is not set # @@ -753,54 +805,16 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set # CONFIG_MFD_TC6393XB is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -CONFIG_VIDEO_DEV=y -CONFIG_VIDEO_V4L2_COMMON=y -CONFIG_VIDEO_ALLOW_V4L1=y -CONFIG_VIDEO_V4L1_COMPAT=y -# CONFIG_DVB_CORE is not set -CONFIG_VIDEO_MEDIA=y - -# -# Multimedia drivers -# -# CONFIG_MEDIA_ATTACH is not set -CONFIG_MEDIA_TUNER=y -# CONFIG_MEDIA_TUNER_CUSTOMISE is not set -CONFIG_MEDIA_TUNER_SIMPLE=y -CONFIG_MEDIA_TUNER_TDA8290=y -CONFIG_MEDIA_TUNER_TDA9887=y -CONFIG_MEDIA_TUNER_TEA5761=y -CONFIG_MEDIA_TUNER_TEA5767=y -CONFIG_MEDIA_TUNER_MT20XX=y -CONFIG_MEDIA_TUNER_XC2028=y -CONFIG_MEDIA_TUNER_XC5000=y -CONFIG_MEDIA_TUNER_MC44S803=y -CONFIG_VIDEO_V4L2=y -CONFIG_VIDEO_V4L1=y -CONFIG_VIDEO_CAPTURE_DRIVERS=y -# CONFIG_VIDEO_ADV_DEBUG is not set -# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set -CONFIG_VIDEO_HELPER_CHIPS_AUTO=y -# CONFIG_VIDEO_VIVI is not set -# CONFIG_VIDEO_CPIA is not set -# CONFIG_VIDEO_SAA5246A is not set -# CONFIG_VIDEO_SAA5249 is not set -# CONFIG_SOC_CAMERA is not set -# CONFIG_RADIO_ADAPTERS is not set -# CONFIG_DAB is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -917,6 +931,7 @@ CONFIG_RTC_DRV_PCF8563=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -962,12 +977,15 @@ CONFIG_RTC_DRV_PCF8563=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set @@ -1021,6 +1039,12 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +CONFIG_UBIFS_FS=y +# CONFIG_UBIFS_FS_XATTR is not set +# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_ZLIB=y +# CONFIG_UBIFS_FS_DEBUG is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1119,25 +1143,11 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_RING_BUFFER=y +CONFIG_EVENT_TRACING=y +CONFIG_CONTEXT_SWITCH_TRACER=y CONFIG_TRACING=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_PREEMPT_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_FTRACE is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y @@ -1151,16 +1161,104 @@ CONFIG_ARM_UNWIND=y # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_CRYPTO is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=y +# CONFIG_CRYPTO_ZLIB is not set +CONFIG_CRYPTO_LZO=y + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y CONFIG_BINARY_PRINTF=y # # Library routines # CONFIG_BITREVERSE=y +CONFIG_RATIONAL=y CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set +CONFIG_CRC16=y # CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y @@ -1168,6 +1266,8 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -- cgit v1.1 From 42469ff014812880d7324285d165841f4b1814e7 Mon Sep 17 00:00:00 2001 From: Sascha Hauer <s.hauer@pengutronix.de> Date: Fri, 24 Jul 2009 17:31:03 +0200 Subject: mx3 defconfig update - enable PCM043, MX31LILLY, ARMADILLO5X0 and MX35_3DS boards - enable MXC nand driver - enable UBI support - disable cs89x0 support which broke all boards which do not have this chip Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> --- arch/arm/configs/mx3_defconfig | 151 ++++++++++++++++++++++++++++------------- 1 file changed, 102 insertions(+), 49 deletions(-) (limited to 'arch') diff --git a/arch/arm/configs/mx3_defconfig b/arch/arm/configs/mx3_defconfig index 20ada52..a4f9a2a 100644 --- a/arch/arm/configs/mx3_defconfig +++ b/arch/arm/configs/mx3_defconfig @@ -1,15 +1,15 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc1 -# Wed Apr 8 11:06:37 2009 +# Linux kernel version: 2.6.31-rc4 +# Tue Jul 28 14:11:34 2009 # CONFIG_ARM=y +CONFIG_HAVE_PWM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -18,14 +18,13 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_ARCH_MTD_XIP=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -86,7 +85,12 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -97,6 +101,11 @@ CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y @@ -109,7 +118,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -136,13 +145,14 @@ CONFIG_FREEZER=y # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set +CONFIG_ARCH_MXC=y +# CONFIG_ARCH_STMP3XXX is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set @@ -151,25 +161,25 @@ CONFIG_FREEZER=y # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set # CONFIG_ARCH_KIRKWOOD is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set # CONFIG_ARCH_LOKI is not set # CONFIG_ARCH_MV78XX0 is not set -CONFIG_ARCH_MXC=y # CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_MSM is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM is not set -# CONFIG_ARCH_W90X900 is not set # # Freescale MXC Implementations @@ -178,6 +188,7 @@ CONFIG_ARCH_MXC=y # CONFIG_ARCH_MX2 is not set CONFIG_ARCH_MX3=y CONFIG_ARCH_MX31=y +CONFIG_ARCH_MX35=y # # MX3 platforms: @@ -185,12 +196,19 @@ CONFIG_ARCH_MX31=y CONFIG_MACH_MX31ADS=y CONFIG_MACH_MX31ADS_WM1133_EV1=y CONFIG_MACH_PCM037=y +CONFIG_MACH_PCM037_EET=y CONFIG_MACH_MX31LITE=y CONFIG_MACH_MX31_3DS=y CONFIG_MACH_MX31MOBOARD=y +CONFIG_MACH_MX31LILLY=y CONFIG_MACH_QONG=y +CONFIG_MACH_PCM043=y +CONFIG_MACH_ARMADILLO5X0=y +CONFIG_MACH_MX35_3DS=y CONFIG_MXC_IRQ_PRIOR=y CONFIG_MXC_PWM=y +CONFIG_ARCH_HAS_RNGA=y +CONFIG_ARCH_MXC_IOMUX_V3=y # # Processor Type @@ -218,6 +236,7 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_BPREDICT_DISABLE is not set CONFIG_OUTER_CACHE=y CONFIG_CACHE_L2X0=y +# CONFIG_ARM_ERRATA_411920 is not set CONFIG_COMMON_CLKDEV=y # @@ -242,7 +261,6 @@ CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y CONFIG_OABI_COMPAT=y -CONFIG_ARCH_FLATMEM_HAS_HOLES=y # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set # CONFIG_HIGHMEM is not set @@ -257,10 +275,11 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set # # Boot options @@ -362,6 +381,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -465,7 +485,16 @@ CONFIG_MTD_PHYSMAP=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_NAND is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +CONFIG_MTD_NAND_MXC=y # CONFIG_MTD_ONENAND is not set # @@ -476,10 +505,30 @@ CONFIG_MTD_PHYSMAP=y # # UBI - Unsorted block images # -# CONFIG_MTD_UBI is not set +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_RESERVE=1 +# CONFIG_MTD_UBI_GLUEBI is not set + +# +# UBI debugging options +# +# CONFIG_MTD_UBI_DEBUG is not set # CONFIG_PARPORT is not set # CONFIG_BLK_DEV is not set -# CONFIG_MISC_DEVICES is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +CONFIG_EEPROM_AT24=y +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -493,7 +542,6 @@ CONFIG_HAVE_IDE=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -528,7 +576,7 @@ CONFIG_MII=y # CONFIG_ETHOC is not set # CONFIG_SMC911X is not set CONFIG_SMSC911X=y -# CONFIG_DNET is not set +CONFIG_DNET=y # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -537,8 +585,10 @@ CONFIG_SMSC911X=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set -CONFIG_CS89x0=y -CONFIG_CS89x0_NONISA_IRQ=y +# CONFIG_CS89x0 is not set +# CONFIG_KS8842 is not set +CONFIG_FEC=y +# CONFIG_FEC2 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -609,6 +659,7 @@ CONFIG_I2C_HELPER_AUTO=y # # I2C system bus drivers (mostly embedded / system-on-chip) # +# CONFIG_I2C_DESIGNWARE is not set # CONFIG_I2C_GPIO is not set CONFIG_I2C_IMX=y # CONFIG_I2C_OCORES is not set @@ -633,7 +684,6 @@ CONFIG_I2C_IMX=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -669,6 +719,7 @@ CONFIG_W1=y # # CONFIG_W1_MASTER_DS2482 is not set CONFIG_W1_MASTER_MXC=y +# CONFIG_W1_MASTER_DS1WM is not set # CONFIG_W1_MASTER_GPIO is not set # @@ -703,6 +754,8 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set # CONFIG_MFD_TC6393XB is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set @@ -711,10 +764,8 @@ CONFIG_MFD_WM8350_CONFIG_MODE_0=y CONFIG_MFD_WM8352_CONFIG_MODE_0=y CONFIG_MFD_WM8350_I2C=y # CONFIG_MFD_PCF50633 is not set - -# -# Multimedia devices -# +# CONFIG_AB3100_CORE is not set +CONFIG_MEDIA_SUPPORT=y # # Multimedia core support @@ -758,8 +809,10 @@ CONFIG_SOC_CAMERA_MT9T031=y CONFIG_SOC_CAMERA_MT9V022=y CONFIG_SOC_CAMERA_TW9910=y # CONFIG_SOC_CAMERA_PLATFORM is not set -# CONFIG_SOC_CAMERA_OV772X is not set +CONFIG_SOC_CAMERA_OV772X=y +CONFIG_MX3_VIDEO=y CONFIG_VIDEO_MX3=y +# CONFIG_VIDEO_SH_MOBILE_CEU is not set # CONFIG_RADIO_ADAPTERS is not set # CONFIG_DAB is not set @@ -847,8 +900,11 @@ CONFIG_REGULATOR=y # CONFIG_REGULATOR_DEBUG is not set # CONFIG_REGULATOR_FIXED_VOLTAGE is not set # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set # CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_REGULATOR_MAX1586 is not set CONFIG_REGULATOR_WM8350=y +# CONFIG_REGULATOR_LP3971 is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -861,10 +917,12 @@ CONFIG_REGULATOR_WM8350=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -921,6 +979,12 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +CONFIG_UBIFS_FS=y +# CONFIG_UBIFS_FS_XATTR is not set +# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_ZLIB=y +# CONFIG_UBIFS_FS_DEBUG is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -937,6 +1001,7 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set CONFIG_LOCKD=y @@ -979,22 +1044,7 @@ CONFIG_FRAME_WARN=1024 CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_PREEMPT_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_ARM_UNWIND=y @@ -1094,9 +1144,9 @@ CONFIG_CRYPTO_DES=y # # Compression # -# CONFIG_CRYPTO_DEFLATE is not set +CONFIG_CRYPTO_DEFLATE=y # CONFIG_CRYPTO_ZLIB is not set -# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_LZO=y # # Random Number Generation @@ -1109,9 +1159,10 @@ CONFIG_CRYPTO_HW=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_RATIONAL=y CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set +CONFIG_CRC16=y # CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y @@ -1119,6 +1170,8 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -- cgit v1.1 From 73ba651fc246fcc3e446da4155e0425b4219d2c4 Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom <thellstrom@vmware.com> Date: Fri, 24 Jul 2009 09:57:33 +0200 Subject: x86: Export kmap_atomic_prot() needed for TTM. This functionality is needed to kmap_atomic() highmem pages that may potentially have or are about to set up other mappings with non-standard caching attributes. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com> --- arch/x86/mm/highmem_32.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/x86/mm/highmem_32.c b/arch/x86/mm/highmem_32.c index 58f621e..2112ed5 100644 --- a/arch/x86/mm/highmem_32.c +++ b/arch/x86/mm/highmem_32.c @@ -103,6 +103,7 @@ EXPORT_SYMBOL(kmap); EXPORT_SYMBOL(kunmap); EXPORT_SYMBOL(kmap_atomic); EXPORT_SYMBOL(kunmap_atomic); +EXPORT_SYMBOL(kmap_atomic_prot); void __init set_highmem_pages_init(void) { -- cgit v1.1 From 0c997c0eaac8c68fa23719617484dae29bddaedd Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen <lars@metafoo.de> Date: Wed, 22 Jul 2009 00:33:06 +0200 Subject: S3C24XX: GPIO: Fix pin range check in s3c_gpiolib_getchip In the s3c_gpiolib_getchip implementation for s3c24xx the check whether a pin is in the gpio banks range is reversed. Thus the function returns NULL for valid pins and the gpio chip if its not valid. As a result gpio states are not saved/restored properly during suspend/resume. Signed-off-by: Ben Dooks <ben-linux@fluff.org> --- arch/arm/mach-s3c2410/include/mach/gpio-core.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-core.h b/arch/arm/mach-s3c2410/include/mach/gpio-core.h index 8fe1920..f8b879a 100644 --- a/arch/arm/mach-s3c2410/include/mach/gpio-core.h +++ b/arch/arm/mach-s3c2410/include/mach/gpio-core.h @@ -28,7 +28,7 @@ static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int pin) return NULL; chip = &s3c24xx_gpios[pin/32]; - return (S3C2410_GPIO_OFFSET(pin) > chip->chip.ngpio) ? chip : NULL; + return (S3C2410_GPIO_OFFSET(pin) < chip->chip.ngpio) ? chip : NULL; } #endif /* __ASM_ARCH_GPIO_CORE_H */ -- cgit v1.1 From 1d91e1a296244690461a7c36d71710dfbabbc219 Mon Sep 17 00:00:00 2001 From: Mark Brown <broonie@opensource.wolfsonmicro.com> Date: Wed, 15 Jul 2009 13:03:34 +0100 Subject: S3C64XX: Fix get_rate() for ARMCLK If the requested clock is faster than the parent clock then the parent clock is the closest we can get to the request so we need to return that instead of the requested clock. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> --- arch/arm/plat-s3c64xx/s3c6400-clock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c index 1debc1f..f8165e6 100644 --- a/arch/arm/plat-s3c64xx/s3c6400-clock.c +++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c @@ -153,7 +153,7 @@ static unsigned long s3c64xx_clk_arm_round_rate(struct clk *clk, u32 div; if (parent < rate) - return rate; + return parent; div = (parent / rate) - 1; if (div > armclk_mask) -- cgit v1.1 From 9b71de49b030ad8fd4d13d38571b5c42dc9ed8dd Mon Sep 17 00:00:00 2001 From: Mark Brown <broonie@opensource.wolfsonmicro.com> Date: Wed, 15 Jul 2009 13:03:35 +0100 Subject: S3C64XX: Fix ARMCLK configuration The value of armclk_mask needs to be inverted for use as a mask on the register value when updating ARM_RATIO. This is critical for cpufreq support, without it attempts to scale the frequency of the core trash pretty much the entire clock tree. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> --- arch/arm/plat-s3c64xx/s3c6400-clock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c index f8165e6..febac19 100644 --- a/arch/arm/plat-s3c64xx/s3c6400-clock.c +++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c @@ -175,7 +175,7 @@ static int s3c64xx_clk_arm_set_rate(struct clk *clk, unsigned long rate) div = clk_get_rate(clk->parent) / rate; val = __raw_readl(S3C_CLK_DIV0); - val &= armclk_mask; + val &= ~armclk_mask; val |= (div - 1); __raw_writel(val, S3C_CLK_DIV0); -- cgit v1.1 From 5156ddce6c0a152ee7ccab2c976c6a8abc8a49b5 Mon Sep 17 00:00:00 2001 From: Kumar Gala <galak@kernel.crashing.org> Date: Wed, 29 Jul 2009 23:04:25 -0500 Subject: powerpc/mm: Fix SMP issue with MMU context handling code In switch_mmu_context() if we call steal_context_smp() to get a context to use we shouldn't fall through and than call steal_context_up(). Doing so can be problematic in that the 'mm' that steal_context_up() ends up using will not get marked dirty in the stale_map[] for other CPUs that might have used that mm. Thus we could end up with stale TLB entries in the other CPUs that can cause all kinda of havoc. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> --- arch/powerpc/mm/mmu_context_nohash.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/powerpc/mm/mmu_context_nohash.c b/arch/powerpc/mm/mmu_context_nohash.c index 92a1971..b1a727d 100644 --- a/arch/powerpc/mm/mmu_context_nohash.c +++ b/arch/powerpc/mm/mmu_context_nohash.c @@ -217,6 +217,7 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next) id = steal_context_smp(id); if (id == MMU_NO_CONTEXT) goto again; + goto stolen; } #endif /* CONFIG_SMP */ id = steal_context_up(id); -- cgit v1.1 From c4673f9a32d7b02bcd2057763d3d368efe5809c3 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov <avorontsov@ru.mvista.com> Date: Wed, 24 Jun 2009 20:30:28 +0400 Subject: powerpc/85xx: Fix ethernet link detection on MPC8569E-MDS boards Linux isn't able to detect link changes on ethernet ports that were used by U-Boot. This is because U-Boot wrongly clears interrupt polarity bit (INTPOL, 0x400) in the extended status register (EXT_SR, 0x1b) of Marvell PHYs. There is no easy way for PHY drivers to know IRQ line polarity (we could extract it from the device tree and pass it to phydevs, but that'll be quite a lot of work), so for now just reset the PHYs to their default states. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> --- arch/powerpc/platforms/85xx/mpc85xx_mds.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c index 60ed9c0..bfb3283 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c @@ -233,6 +233,19 @@ static void __init mpc85xx_mds_setup_arch(void) /* Turn UCC1 & UCC2 on */ setbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN); setbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN); + } else if (machine_is(mpc8569_mds)) { +#define BCSR7_UCC12_GETHnRST (0x1 << 2) +#define BCSR8_UEM_MARVELL_RST (0x1 << 1) + /* + * U-Boot mangles interrupt polarity for Marvell PHYs, + * so reset built-in and UEM Marvell PHYs, this puts + * the PHYs into their normal state. + */ + clrbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST); + setbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST); + + setbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST); + clrbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST); } iounmap(bcsr_regs); } -- cgit v1.1 From 8a0b177f367a8fd03dc5ba1f5a4494d1424471aa Mon Sep 17 00:00:00 2001 From: Anton Vorontsov <cbouatmailru@gmail.com> Date: Wed, 1 Jul 2009 21:39:25 +0400 Subject: powerpc/85xx: Don't scan for TBI PHY addresses on MPC8569E-MDS boards Sometimes (e.g. when there are no UEMs attached to a board) fsl_pq_mdio_find_free() fails to find a spare address for a TBI PHY, this is because get_phy_id() returns bogus 0x0000ffff values (0xffffffff is expected), and therefore mdio bus probing fails with the following message: fsl-pq_mdio: probe of e0082120.mdio failed with error -16 And obviously ethernet doesn't work after this. This patch solves the problem by adding tbi-phy node into mdio node, so that we won't scan for spare addresses, we'll just use a fixed one. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> --- arch/powerpc/boot/dts/mpc8569mds.dts | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/boot/dts/mpc8569mds.dts b/arch/powerpc/boot/dts/mpc8569mds.dts index a680165..9e4ce99 100644 --- a/arch/powerpc/boot/dts/mpc8569mds.dts +++ b/arch/powerpc/boot/dts/mpc8569mds.dts @@ -501,6 +501,10 @@ reg = <0x6>; device_type = "ethernet-phy"; }; + tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; }; mdio@3520 { #address-cells = <1>; -- cgit v1.1 From 1333c3d6d35bdb109ddbd4b7086cbf066a27b156 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov <avorontsov@ru.mvista.com> Date: Tue, 21 Jul 2009 01:36:43 +0400 Subject: powerpc/83xx: Fix PCI IO base address on MPC837xE-RDB boards U-Boot maps PCI IO at 0xe0300000, while current dts files specify 0xe2000000. This leads to the following oops with CONFIG_8139TOO_PIO=y. 8139too Fast Ethernet driver 0.9.28 Machine check in kernel mode. Caused by (from SRR1=41000): Transfer error ack signal Oops: Machine check, sig: 7 [#1] MPC837x RDB [...] NIP [00000900] 0x900 LR [c0439df8] rtl8139_init_board+0x238/0x524 Call Trace: [cf831d90] [c0439dcc] rtl8139_init_board+0x20c/0x524 (unreliable) [cf831de0] [c043a15c] rtl8139_init_one+0x78/0x65c [cf831e40] [c0235250] pci_call_probe+0x20/0x30 [...] This patch fixes the issue by specifying the correct PCI IO base address. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> --- arch/powerpc/boot/dts/mpc8377_rdb.dts | 2 +- arch/powerpc/boot/dts/mpc8378_rdb.dts | 2 +- arch/powerpc/boot/dts/mpc8379_rdb.dts | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts index 224b4f0..4f06dbc 100644 --- a/arch/powerpc/boot/dts/mpc8377_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts @@ -410,7 +410,7 @@ bus-range = <0 0>; ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 - 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>; + 0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>; sleep = <&pmc 0x00010000>; clock-frequency = <66666666>; #interrupt-cells = <1>; diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts index 474ea2f..aabf343 100644 --- a/arch/powerpc/boot/dts/mpc8378_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts @@ -394,7 +394,7 @@ bus-range = <0 0>; ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 - 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>; + 0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>; sleep = <&pmc 0x00010000>; clock-frequency = <66666666>; #interrupt-cells = <1>; diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts index d4838af..9b1da86 100644 --- a/arch/powerpc/boot/dts/mpc8379_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts @@ -424,7 +424,7 @@ bus-range = <0x0 0x0>; ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 - 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>; + 0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>; sleep = <&pmc 0x00010000>; clock-frequency = <66666666>; #interrupt-cells = <1>; -- cgit v1.1 From f27d4d47dcf8906c8a22908dc1d32ec641e9fbe0 Mon Sep 17 00:00:00 2001 From: Martyn Welch <martyn.welch@gefanuc.com> Date: Thu, 2 Jul 2009 15:18:35 +0100 Subject: powerpc/86xx: Update defconfig for GE Fanuc's PPC9A General update of defconfig including the following notable changes: - Enable GPIO access via sysfs on GE Fanuc's PPC9A. - Enable Highmem support. - Support for PCMCIA based daughter card. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> --- arch/powerpc/configs/86xx/gef_ppc9a_defconfig | 518 ++++++++++---------------- 1 file changed, 196 insertions(+), 322 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig index b6a23af..d8354d9 100644 --- a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig +++ b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig @@ -1,26 +1,28 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:31 2009 +# Linux kernel version: 2.6.30 +# Thu Jul 2 13:55:24 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_PHYS_64BIT is not set CONFIG_ALTIVEC=y CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y CONFIG_SMP=y CONFIG_NR_CPUS=2 CONFIG_PPC32=y @@ -32,6 +34,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y @@ -41,7 +44,6 @@ CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_LOCKBREAK=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set @@ -56,11 +58,13 @@ CONFIG_PPC_UDBG_16550=y CONFIG_GENERIC_TBSYNC=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -112,9 +116,7 @@ CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -127,8 +129,15 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -143,6 +152,10 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_USE_GENERIC_SMP_HELPERS=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -156,7 +169,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -216,7 +229,7 @@ CONFIG_MPIC=y # # Kernel options # -# CONFIG_HIGHMEM is not set +CONFIG_HIGHMEM=y CONFIG_TICK_ONESHOT=y # CONFIG_NO_HZ is not set CONFIG_HIGH_RES_TIMERS=y @@ -235,6 +248,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=m # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -256,9 +270,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -285,14 +299,32 @@ CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y CONFIG_PCIEPORTBUS=y CONFIG_PCIEAER=y +# CONFIG_PCIE_ECRC is not set +# CONFIG_PCIEAER_INJECT is not set # CONFIG_PCIEASPM is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set -CONFIG_PCI_DEBUG=y # CONFIG_PCI_STUB is not set # CONFIG_PCI_IOV is not set -# CONFIG_PCCARD is not set +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y +# CONFIG_PCMCIA_LOAD_CIS is not set +# CONFIG_PCMCIA_IOCTL is not set +# CONFIG_CARDBUS is not set + +# +# PC-card bridges +# +CONFIG_YENTA=y +# CONFIG_YENTA_O2 is not set +# CONFIG_YENTA_RICOH is not set +CONFIG_YENTA_TI=y +# CONFIG_YENTA_TOSHIBA is not set +# CONFIG_PD6729 is not set +# CONFIG_I82092 is not set +CONFIG_PCCARD_NONSTATIC=y # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -353,8 +385,8 @@ CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=m CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y -# CONFIG_INET_LRO is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +CONFIG_INET_LRO=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -380,174 +412,26 @@ CONFIG_IPV6_NDISC_NODETYPE=y CONFIG_IPV6_TUNNEL=m # CONFIG_IPV6_MULTIPLE_TABLES is not set # CONFIG_IPV6_MROUTE is not set -# CONFIG_NETLABEL is not set # CONFIG_NETWORK_SECMARK is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -CONFIG_NETFILTER_ADVANCED=y -CONFIG_BRIDGE_NETFILTER=y - -# -# Core Netfilter Configuration -# -# CONFIG_NETFILTER_NETLINK_QUEUE is not set -# CONFIG_NETFILTER_NETLINK_LOG is not set -# CONFIG_NF_CONNTRACK is not set -# CONFIG_NETFILTER_TPROXY is not set -CONFIG_NETFILTER_XTABLES=m -# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set -# CONFIG_NETFILTER_XT_TARGET_DSCP is not set -# CONFIG_NETFILTER_XT_TARGET_HL is not set -# CONFIG_NETFILTER_XT_TARGET_MARK is not set -# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set -# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set -# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set -# CONFIG_NETFILTER_XT_TARGET_TRACE is not set -# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set -# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set -# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set -# CONFIG_NETFILTER_XT_MATCH_DCCP is not set -# CONFIG_NETFILTER_XT_MATCH_DSCP is not set -# CONFIG_NETFILTER_XT_MATCH_ESP is not set -# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set -CONFIG_NETFILTER_XT_MATCH_HL=m -# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set -# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set -# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set -# CONFIG_NETFILTER_XT_MATCH_MAC is not set -# CONFIG_NETFILTER_XT_MATCH_MARK is not set -# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set -# CONFIG_NETFILTER_XT_MATCH_OWNER is not set -# CONFIG_NETFILTER_XT_MATCH_POLICY is not set -# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set -# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set -# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set -# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set -# CONFIG_NETFILTER_XT_MATCH_REALM is not set -# CONFIG_NETFILTER_XT_MATCH_RECENT is not set -# CONFIG_NETFILTER_XT_MATCH_SCTP is not set -# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set -# CONFIG_NETFILTER_XT_MATCH_STRING is not set -# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set -# CONFIG_NETFILTER_XT_MATCH_TIME is not set -# CONFIG_NETFILTER_XT_MATCH_U32 is not set -# CONFIG_IP_VS is not set - -# -# IP: Netfilter Configuration -# -# CONFIG_NF_DEFRAG_IPV4 is not set -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -# CONFIG_IP_NF_MATCH_AH is not set -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_ECN=m -# CONFIG_IP_NF_TARGET_TTL is not set -CONFIG_IP_NF_RAW=m -# CONFIG_IP_NF_SECURITY is not set -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m - -# -# IPv6: Netfilter Configuration -# -CONFIG_IP6_NF_QUEUE=m -CONFIG_IP6_NF_IPTABLES=m -# CONFIG_IP6_NF_MATCH_AH is not set -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_MATCH_FRAG=m -CONFIG_IP6_NF_MATCH_OPTS=m -CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_IPV6HEADER=m -# CONFIG_IP6_NF_MATCH_MH is not set -CONFIG_IP6_NF_MATCH_RT=m -# CONFIG_IP6_NF_TARGET_HL is not set -CONFIG_IP6_NF_TARGET_LOG=m -CONFIG_IP6_NF_FILTER=m -# CONFIG_IP6_NF_TARGET_REJECT is not set -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_RAW=m -# CONFIG_IP6_NF_SECURITY is not set -# CONFIG_BRIDGE_NF_EBTABLES is not set +# CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set -CONFIG_IP_SCTP=m -# CONFIG_SCTP_DBG_MSG is not set -# CONFIG_SCTP_DBG_OBJCNT is not set -# CONFIG_SCTP_HMAC_NONE is not set -# CONFIG_SCTP_HMAC_SHA1 is not set -CONFIG_SCTP_HMAC_MD5=y -CONFIG_TIPC=m -# CONFIG_TIPC_ADVANCED is not set -# CONFIG_TIPC_DEBUG is not set -CONFIG_ATM=m -CONFIG_ATM_CLIP=m -# CONFIG_ATM_CLIP_NO_ICMP is not set -CONFIG_ATM_LANE=m -CONFIG_ATM_MPOA=m -CONFIG_ATM_BR2684=m -# CONFIG_ATM_BR2684_IPFILTER is not set -CONFIG_STP=m -CONFIG_BRIDGE=m +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set # CONFIG_NET_DSA is not set -CONFIG_VLAN_8021Q=m -# CONFIG_VLAN_8021Q_GVRP is not set +# CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set -CONFIG_LLC=m # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_ECONET is not set -CONFIG_WAN_ROUTER=m +# CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set -CONFIG_NET_SCHED=y - -# -# Queueing/Scheduling -# -CONFIG_NET_SCH_CBQ=m -CONFIG_NET_SCH_HTB=m -CONFIG_NET_SCH_HFSC=m -CONFIG_NET_SCH_ATM=m -CONFIG_NET_SCH_PRIO=m -# CONFIG_NET_SCH_MULTIQ is not set -CONFIG_NET_SCH_RED=m -CONFIG_NET_SCH_SFQ=m -CONFIG_NET_SCH_TEQL=m -CONFIG_NET_SCH_TBF=m -CONFIG_NET_SCH_GRED=m -CONFIG_NET_SCH_DSMARK=m -CONFIG_NET_SCH_NETEM=m -# CONFIG_NET_SCH_DRR is not set - -# -# Classification -# -CONFIG_NET_CLS=y -# CONFIG_NET_CLS_BASIC is not set -CONFIG_NET_CLS_TCINDEX=m -CONFIG_NET_CLS_ROUTE4=m -CONFIG_NET_CLS_ROUTE=y -CONFIG_NET_CLS_FW=m -CONFIG_NET_CLS_U32=m -# CONFIG_CLS_U32_PERF is not set -# CONFIG_CLS_U32_MARK is not set -CONFIG_NET_CLS_RSVP=m -CONFIG_NET_CLS_RSVP6=m -# CONFIG_NET_CLS_FLOW is not set -# CONFIG_NET_EMATCH is not set -# CONFIG_NET_CLS_ACT is not set -# CONFIG_NET_CLS_IND is not set -CONFIG_NET_SCH_FIFO=y +# CONFIG_IEEE802154 is not set +# CONFIG_NET_SCHED is not set # CONFIG_DCB is not set # @@ -560,12 +444,7 @@ CONFIG_NET_PKTGEN=m # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set CONFIG_FIB_RULES=y -CONFIG_WIRELESS=y -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set -# CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set +# CONFIG_WIRELESS is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -580,9 +459,9 @@ CONFIG_WIRELESS_OLD_REGULATORY=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=y @@ -672,6 +551,7 @@ CONFIG_MTD_PHYSMAP_OF=y CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -707,9 +587,60 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set +CONFIG_IDE=y + +# +# Please see Documentation/ide/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set +CONFIG_BLK_DEV_IDECS=y +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y + +# +# IDE chipset support/bugfixes +# +# CONFIG_BLK_DEV_PLATFORM is not set + +# +# PCI IDE chipsets support +# +# CONFIG_BLK_DEV_GENERIC is not set +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_JMICRON is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8172 is not set +# CONFIG_BLK_DEV_IT8213 is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SL82C105 is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_BLK_DEV_TC86C001 is not set +# CONFIG_BLK_DEV_IDEDMA is not set # # SCSI device support @@ -731,10 +662,6 @@ CONFIG_BLK_DEV_SR=y # CONFIG_BLK_DEV_SR_VENDOR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -751,6 +678,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -759,6 +687,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set @@ -778,7 +707,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -791,6 +719,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y @@ -842,6 +771,7 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PCMCIA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RZ1000 is not set @@ -862,14 +792,17 @@ CONFIG_SATA_SIL=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_MACVLAN is not set @@ -916,6 +849,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -935,8 +869,10 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -963,22 +899,8 @@ CONFIG_GIANFAR=y # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set +# CONFIG_NET_PCMCIA is not set # CONFIG_WAN is not set -CONFIG_ATM_DRIVERS=y -# CONFIG_ATM_DUMMY is not set -# CONFIG_ATM_TCP is not set -# CONFIG_ATM_LANAI is not set -# CONFIG_ATM_ENI is not set -# CONFIG_ATM_FIRESTREAM is not set -# CONFIG_ATM_ZATM is not set -# CONFIG_ATM_NICSTAR is not set -# CONFIG_ATM_IDT77252 is not set -# CONFIG_ATM_AMBASSADOR is not set -# CONFIG_ATM_HORIZON is not set -# CONFIG_ATM_IA is not set -# CONFIG_ATM_FORE200E is not set -# CONFIG_ATM_HE is not set -# CONFIG_ATM_SOLOS is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set CONFIG_PPP=m @@ -990,7 +912,6 @@ CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m # CONFIG_PPP_MPPE is not set CONFIG_PPPOE=m -CONFIG_PPPOATM=m # CONFIG_PPPOL2TP is not set CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y @@ -1010,7 +931,7 @@ CONFIG_NET_POLL_CONTROLLER=y # Input device support # CONFIG_INPUT=y -CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set # @@ -1058,6 +979,7 @@ CONFIG_DEVKMEM=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y # CONFIG_SERIAL_8250_PCI is not set +# CONFIG_SERIAL_8250_CS is not set CONFIG_SERIAL_8250_NR_UARTS=2 CONFIG_SERIAL_8250_RUNTIME_UARTS=2 # CONFIG_SERIAL_8250_EXTENDED is not set @@ -1080,6 +1002,14 @@ CONFIG_HW_RANDOM=y CONFIG_NVRAM=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y @@ -1143,18 +1073,21 @@ CONFIG_DS1682=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y -# CONFIG_DEBUG_GPIO is not set -# CONFIG_GPIO_SYSFS is not set +CONFIG_GPIO_SYSFS=y # # Memory mapped GPIO expanders: @@ -1229,6 +1162,7 @@ CONFIG_SENSORS_LM92=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1284,24 +1218,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1346,7 +1265,7 @@ CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y -# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_DRAGONRISE is not set CONFIG_HID_EZKEY=y # CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y @@ -1363,10 +1282,11 @@ CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y -# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set # CONFIG_HID_TOPSEED is not set -CONFIG_THRUSTMASTER_FF=m -CONFIG_ZEROPLUS_FF=m +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1392,6 +1312,7 @@ CONFIG_USB=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set @@ -1475,7 +1396,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set -# CONFIG_USB_ATM is not set # CONFIG_USB_GADGET is not set # @@ -1521,6 +1441,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set CONFIG_RTC_DRV_RX8581=y +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1548,6 +1469,10 @@ CONFIG_RTC_DRV_RX8581=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1569,10 +1494,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1589,8 +1516,11 @@ CONFIG_INOTIFY_USER=y # # CD-ROM/DVD Filesystems # -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=y +CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems @@ -1598,8 +1528,8 @@ CONFIG_INOTIFY_USER=y CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +CONFIG_FAT_DEFAULT_CODEPAGE=850 +CONFIG_FAT_DEFAULT_IOCHARSET="ascii" # CONFIG_NTFS_FS is not set # @@ -1649,6 +1579,7 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set CONFIG_LOCKD=y @@ -1723,13 +1654,13 @@ CONFIG_NLS_UTF8=m # CONFIG_BITREVERSE=y CONFIG_GENERIC_FIND_LAST_BIT=y -CONFIG_CRC_CCITT=m +CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set -# CONFIG_CRC_T10DIF is not set -# CONFIG_CRC_ITU_T is not set +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=y CONFIG_CRC32=y # CONFIG_CRC7 is not set -CONFIG_LIBCRC32C=m +CONFIG_LIBCRC32C=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_DECOMPRESS_GZIP=y @@ -1738,6 +1669,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1750,75 +1682,24 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set -CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 -CONFIG_DETECT_HUNG_TASK=y -# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set -CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 -CONFIG_SCHED_DEBUG=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_TIMER_STATS is not set -# CONFIG_DEBUG_OBJECTS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_INFO=y -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_MEMORY_INIT is not set -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_SG is not set -# CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set -# CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set -# CONFIG_BACKTRACE_SELF_TEST is not set -# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set -# CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_PREEMPT_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y -# CONFIG_KGDB is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_CODE_PATCHING_SELFTEST is not set -# CONFIG_FTR_FIXUP_SELFTEST is not set -# CONFIG_MSI_BITMAP_SELFTEST is not set -# CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set -# CONFIG_BDI_SWITCH is not set # CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1826,15 +1707,9 @@ CONFIG_PRINT_STACK_DEPTH=64 # Security options # # CONFIG_KEYS is not set -CONFIG_SECURITY=y +# CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -CONFIG_SECURITY_NETWORK=y -# CONFIG_SECURITY_NETWORK_XFRM is not set -# CONFIG_SECURITY_PATH is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_SECURITY_ROOTPLUG is not set -CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 -# CONFIG_SECURITY_TOMOYO is not set CONFIG_CRYPTO=y # @@ -1854,11 +1729,11 @@ CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_NULL=m +# CONFIG_CRYPTO_NULL is not set CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_AUTHENC=m -CONFIG_CRYPTO_TEST=m +# CONFIG_CRYPTO_TEST is not set # # Authenticated Encryption with Associated Data @@ -1873,53 +1748,52 @@ CONFIG_CRYPTO_TEST=m CONFIG_CRYPTO_CBC=y # CONFIG_CRYPTO_CTR is not set # CONFIG_CRYPTO_CTS is not set -CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_ECB is not set # CONFIG_CRYPTO_LRW is not set -CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_PCBC is not set # CONFIG_CRYPTO_XTS is not set # # Hash modes # -CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_HMAC=m # CONFIG_CRYPTO_XCBC is not set # # Digest # -CONFIG_CRYPTO_CRC32C=m -CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_CRC32C=y +# CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_MICHAEL_MIC=m +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_RMD128 is not set # CONFIG_CRYPTO_RMD160 is not set # CONFIG_CRYPTO_RMD256 is not set # CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_TGR192 is not set -CONFIG_CRYPTO_WP512=m +# CONFIG_CRYPTO_WP512 is not set # # Ciphers # -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_BLOWFISH=m +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_CAMELLIA is not set -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set -CONFIG_CRYPTO_KHAZAD=m +# CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_SEED is not set -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set # # Compression -- cgit v1.1 From 083e268c8b78606658f2e4524168ff45825d879e Mon Sep 17 00:00:00 2001 From: Martyn Welch <martyn.welch@gefanuc.com> Date: Thu, 2 Jul 2009 15:18:44 +0100 Subject: powerpc/86xx: Update GE Fanuc sbc310 default configuration General update of defconfig including the following notable changes: - Enable Highmem support. - Support for PCMCIA based daughter card. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> --- arch/powerpc/configs/86xx/gef_sbc310_defconfig | 213 ++++++++++++++++++------- 1 file changed, 154 insertions(+), 59 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/configs/86xx/gef_sbc310_defconfig b/arch/powerpc/configs/86xx/gef_sbc310_defconfig index a66910e..f2362e5 100644 --- a/arch/powerpc/configs/86xx/gef_sbc310_defconfig +++ b/arch/powerpc/configs/86xx/gef_sbc310_defconfig @@ -1,26 +1,28 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:29 2009 +# Linux kernel version: 2.6.30 +# Thu Jul 2 14:10:12 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_PHYS_64BIT is not set CONFIG_ALTIVEC=y CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y CONFIG_SMP=y CONFIG_NR_CPUS=2 CONFIG_PPC32=y @@ -32,6 +34,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y @@ -41,7 +44,6 @@ CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_LOCKBREAK=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set @@ -56,11 +58,13 @@ CONFIG_PPC_UDBG_16550=y CONFIG_GENERIC_TBSYNC=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -91,7 +95,11 @@ CONFIG_CLASSIC_RCU=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_GROUP_SCHED is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y @@ -109,7 +117,6 @@ CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -122,8 +129,15 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -138,6 +152,10 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_USE_GENERIC_SMP_HELPERS=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -151,7 +169,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -168,7 +186,6 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" # CONFIG_FREEZER is not set -CONFIG_PPC_MSI_BITMAP=y # # Platform support @@ -212,7 +229,7 @@ CONFIG_MPIC=y # # Kernel options # -# CONFIG_HIGHMEM is not set +CONFIG_HIGHMEM=y CONFIG_TICK_ONESHOT=y # CONFIG_NO_HZ is not set CONFIG_HIGH_RES_TIMERS=y @@ -231,6 +248,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -252,9 +270,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -281,13 +299,32 @@ CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y CONFIG_PCIEPORTBUS=y CONFIG_PCIEAER=y +# CONFIG_PCIE_ECRC is not set +# CONFIG_PCIEAER_INJECT is not set # CONFIG_PCIEASPM is not set CONFIG_ARCH_SUPPORTS_MSI=y -CONFIG_PCI_MSI=y +# CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set # CONFIG_PCI_IOV is not set -# CONFIG_PCCARD is not set +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y +# CONFIG_PCMCIA_LOAD_CIS is not set +# CONFIG_PCMCIA_IOCTL is not set +# CONFIG_CARDBUS is not set + +# +# PC-card bridges +# +CONFIG_YENTA=y +# CONFIG_YENTA_O2 is not set +# CONFIG_YENTA_RICOH is not set +CONFIG_YENTA_TI=y +# CONFIG_YENTA_TOSHIBA is not set +# CONFIG_PD6729 is not set +# CONFIG_I82092 is not set +CONFIG_PCCARD_NONSTATIC=y # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -393,6 +430,7 @@ CONFIG_IPV6_TUNNEL=m # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -421,7 +459,9 @@ CONFIG_FIB_RULES=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=y @@ -511,6 +551,7 @@ CONFIG_MTD_PHYSMAP_OF=y CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -546,9 +587,60 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set +CONFIG_IDE=y + +# +# Please see Documentation/ide/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set +CONFIG_BLK_DEV_IDECS=y +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y + +# +# IDE chipset support/bugfixes +# +# CONFIG_BLK_DEV_PLATFORM is not set + +# +# PCI IDE chipsets support +# +# CONFIG_BLK_DEV_GENERIC is not set +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_JMICRON is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8172 is not set +# CONFIG_BLK_DEV_IT8213 is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SL82C105 is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_BLK_DEV_TC86C001 is not set +# CONFIG_BLK_DEV_IDEDMA is not set # # SCSI device support @@ -570,10 +662,6 @@ CONFIG_BLK_DEV_SR=y # CONFIG_BLK_DEV_SR_VENDOR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -590,6 +678,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -598,6 +687,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set @@ -617,7 +707,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -630,6 +719,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y @@ -647,14 +737,17 @@ CONFIG_SATA_SIL24=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_MACVLAN is not set @@ -701,6 +794,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -720,8 +814,10 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -748,6 +844,7 @@ CONFIG_GIANFAR=y # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set +# CONFIG_NET_PCMCIA is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -827,6 +924,7 @@ CONFIG_DEVKMEM=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y # CONFIG_SERIAL_8250_PCI is not set +# CONFIG_SERIAL_8250_CS is not set CONFIG_SERIAL_8250_NR_UARTS=2 CONFIG_SERIAL_8250_RUNTIME_UARTS=2 # CONFIG_SERIAL_8250_EXTENDED is not set @@ -849,6 +947,14 @@ CONFIG_HW_RANDOM=y CONFIG_NVRAM=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y @@ -912,13 +1018,17 @@ CONFIG_DS1682=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y @@ -997,6 +1107,7 @@ CONFIG_SENSORS_LM92=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1052,24 +1163,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1114,7 +1210,7 @@ CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y -# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_DRAGONRISE is not set CONFIG_HID_EZKEY=y # CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y @@ -1131,10 +1227,11 @@ CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y -# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set # CONFIG_HID_TOPSEED is not set -# CONFIG_THRUSTMASTER_FF is not set -# CONFIG_ZEROPLUS_FF is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1160,6 +1257,7 @@ CONFIG_USB=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set @@ -1288,6 +1386,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set CONFIG_RTC_DRV_RX8581=y +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1315,6 +1414,10 @@ CONFIG_RTC_DRV_RX8581=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1336,10 +1439,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1419,6 +1524,7 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set CONFIG_LOCKD=y @@ -1508,6 +1614,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1531,23 +1638,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_PREEMPT_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set -- cgit v1.1 From 34466c5be4dd1490acf98e6d2ff8f3728d8ca5c1 Mon Sep 17 00:00:00 2001 From: Kumar Gala <galak@kernel.crashing.org> Date: Wed, 29 Jul 2009 23:34:01 -0500 Subject: powerpc: Update defconfigs for embedded 6xx/7xxx, 8xx, 8{3,5,6}xxx Signed-off-by: Kumar Gala <galak@kernel.crashing.org> --- arch/powerpc/configs/83xx/asp8347_defconfig | 106 +++++++----- arch/powerpc/configs/83xx/kmeter1_defconfig | 176 +++++++++++++------- arch/powerpc/configs/83xx/mpc8313_rdb_defconfig | 168 +++++++++++++------ arch/powerpc/configs/83xx/mpc8315_rdb_defconfig | 168 +++++++++++++------ arch/powerpc/configs/83xx/mpc832x_mds_defconfig | 111 +++++++------ arch/powerpc/configs/83xx/mpc832x_rdb_defconfig | 120 ++++++++------ arch/powerpc/configs/83xx/mpc834x_itx_defconfig | 114 +++++++------ arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig | 114 +++++++------ arch/powerpc/configs/83xx/mpc834x_mds_defconfig | 104 +++++++----- arch/powerpc/configs/83xx/mpc836x_mds_defconfig | 111 +++++++------ arch/powerpc/configs/83xx/mpc836x_rdk_defconfig | 104 +++++++----- arch/powerpc/configs/83xx/mpc837x_mds_defconfig | 110 ++++++------ arch/powerpc/configs/83xx/mpc837x_rdb_defconfig | 162 ++++++++++++------ arch/powerpc/configs/83xx/sbc834x_defconfig | 103 +++++++----- arch/powerpc/configs/85xx/ksi8560_defconfig | 93 +++++++---- arch/powerpc/configs/85xx/mpc8540_ads_defconfig | 91 ++++++---- arch/powerpc/configs/85xx/mpc8560_ads_defconfig | 99 +++++++---- arch/powerpc/configs/85xx/mpc85xx_cds_defconfig | 99 +++++++---- arch/powerpc/configs/85xx/sbc8548_defconfig | 96 ++++++----- arch/powerpc/configs/85xx/sbc8560_defconfig | 91 ++++++---- arch/powerpc/configs/85xx/socrates_defconfig | 165 ++++++++++++------ arch/powerpc/configs/85xx/stx_gp3_defconfig | 119 ++++++++----- arch/powerpc/configs/85xx/tqm8540_defconfig | 100 ++++++----- arch/powerpc/configs/85xx/tqm8541_defconfig | 101 ++++++----- arch/powerpc/configs/85xx/tqm8548_defconfig | 100 +++++++---- arch/powerpc/configs/85xx/tqm8555_defconfig | 101 ++++++----- arch/powerpc/configs/85xx/tqm8560_defconfig | 101 ++++++----- arch/powerpc/configs/85xx/xes_mpc85xx_defconfig | 118 +++++++------ arch/powerpc/configs/86xx/gef_ppc9a_defconfig | 7 +- arch/powerpc/configs/86xx/gef_sbc310_defconfig | 7 +- arch/powerpc/configs/86xx/gef_sbc610_defconfig | 130 +++++++++------ arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig | 118 ++++++++----- arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig | 186 ++++++++++----------- arch/powerpc/configs/86xx/sbc8641d_defconfig | 112 ++++++++----- arch/powerpc/configs/adder875_defconfig | 97 +++++++---- arch/powerpc/configs/c2k_defconfig | 121 ++++++++------ arch/powerpc/configs/ep8248e_defconfig | 97 +++++++---- arch/powerpc/configs/ep88xc_defconfig | 91 ++++++---- arch/powerpc/configs/linkstation_defconfig | 116 ++++++++----- arch/powerpc/configs/mgcoge_defconfig | 97 +++++++---- arch/powerpc/configs/mgsuvd_defconfig | 89 +++++----- arch/powerpc/configs/mpc7448_hpc2_defconfig | 103 ++++++------ arch/powerpc/configs/mpc8272_ads_defconfig | 104 +++++++----- arch/powerpc/configs/mpc83xx_defconfig | 162 ++++++++++++------ arch/powerpc/configs/mpc85xx_defconfig | 193 ++++++++++------------ arch/powerpc/configs/mpc85xx_smp_defconfig | 193 ++++++++++------------ arch/powerpc/configs/mpc866_ads_defconfig | 92 ++++++----- arch/powerpc/configs/mpc86xx_defconfig | 186 ++++++++++----------- arch/powerpc/configs/mpc885_ads_defconfig | 91 ++++++---- arch/powerpc/configs/pq2fads_defconfig | 110 +++++++----- arch/powerpc/configs/prpmc2800_defconfig | 158 ++++++++++++------ arch/powerpc/configs/storcenter_defconfig | 108 ++++++------ 52 files changed, 3639 insertions(+), 2374 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/configs/83xx/asp8347_defconfig b/arch/powerpc/configs/83xx/asp8347_defconfig index 2789397..a2df063 100644 --- a/arch/powerpc/configs/83xx/asp8347_defconfig +++ b/arch/powerpc/configs/83xx/asp8347_defconfig @@ -1,26 +1,28 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:05 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:02 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y CONFIG_FSL_EMB_PERFMON=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 @@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -53,6 +56,7 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set CONFIG_REDBOOT=y CONFIG_ARCH_SUSPEND_POSSIBLE=y @@ -60,6 +64,7 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -108,7 +113,6 @@ CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -121,9 +125,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -136,6 +147,10 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -148,7 +163,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -190,6 +205,7 @@ CONFIG_PPC_83xx=y # CONFIG_MPC837x_RDB is not set # CONFIG_SBC834x is not set CONFIG_ASP834x=y +# CONFIG_KMETER1 is not set CONFIG_PPC_MPC834x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set @@ -235,6 +251,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -255,9 +272,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -366,6 +383,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -383,7 +401,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -490,6 +512,7 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -525,7 +548,9 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -545,14 +570,17 @@ CONFIG_HAVE_IDE=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -599,6 +627,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -618,8 +647,10 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -786,13 +817,17 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -847,6 +882,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -900,24 +936,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -960,6 +981,7 @@ CONFIG_USB_MON=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set @@ -1069,6 +1091,7 @@ CONFIG_RTC_DRV_DS1374=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1096,6 +1119,10 @@ CONFIG_RTC_DRV_DS1374=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1115,10 +1142,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1192,6 +1221,7 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set CONFIG_LOCKD=y @@ -1287,6 +1317,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1312,22 +1343,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set diff --git a/arch/powerpc/configs/83xx/kmeter1_defconfig b/arch/powerpc/configs/83xx/kmeter1_defconfig index bf0853f..93ebd44 100644 --- a/arch/powerpc/configs/83xx/kmeter1_defconfig +++ b/arch/powerpc/configs/83xx/kmeter1_defconfig @@ -1,25 +1,28 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28 -# Fri Apr 3 10:34:33 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:03 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 @@ -30,21 +33,22 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -52,11 +56,14 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -71,19 +78,30 @@ CONFIG_LOCALVERSION_AUTO=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y @@ -93,17 +111,23 @@ CONFIG_KALLSYMS_ALL=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set @@ -116,10 +140,15 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -127,11 +156,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -147,14 +173,11 @@ CONFIG_IOSCHED_NOOP=y # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -179,6 +202,8 @@ CONFIG_PPC_83xx=y CONFIG_KMETER1=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y CONFIG_IPIC=y # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -194,6 +219,8 @@ CONFIG_IPIC=y CONFIG_QUICC_ENGINE=y # CONFIG_QE_GPIO is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_SIMPLE_GPIO is not set +# CONFIG_MCU_MPC8349EMITX is not set # # Kernel options @@ -212,16 +239,17 @@ CONFIG_SCHED_HRTICK=y # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y -# CONFIG_PREEMPT_RCU is not set CONFIG_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -233,12 +261,17 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -331,7 +364,10 @@ CONFIG_LLC=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -342,8 +378,8 @@ CONFIG_LLC=m # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -362,6 +398,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -431,6 +468,11 @@ CONFIG_MTD_PHRAM=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# # UBI - Unsorted block images # CONFIG_MTD_UBI=y @@ -445,7 +487,6 @@ CONFIG_MTD_UBI_DEBUG=y # CONFIG_MTD_UBI_DEBUG_MSG is not set # CONFIG_MTD_UBI_DEBUG_PARANOID is not set # CONFIG_MTD_UBI_DEBUG_DISABLE_BGT is not set -# CONFIG_MTD_UBI_DEBUG_USERSPACE_IO is not set # CONFIG_MTD_UBI_DEBUG_EMULATE_BITFLIPS is not set # CONFIG_MTD_UBI_DEBUG_EMULATE_WRITE_FAILURES is not set # CONFIG_MTD_UBI_DEBUG_EMULATE_ERASE_FAILURES is not set @@ -459,6 +500,7 @@ CONFIG_MTD_UBI_DEBUG=y # CONFIG_MTD_UBI_DEBUG_MSG_IO is not set CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -505,10 +547,15 @@ CONFIG_MARVELL_PHY=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -517,11 +564,12 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set CONFIG_NETDEV_1000=y +CONFIG_FSL_PQ_MDIO=y # CONFIG_GIANFAR is not set CONFIG_UCC_GETH=y # CONFIG_UGETH_MAGIC_PACKET is not set -# CONFIG_UGETH_FILTERING is not set # CONFIG_UGETH_TX_ON_DEMAND is not set # CONFIG_MV643XX_ETH is not set # CONFIG_NETDEV_10000 is not set @@ -531,7 +579,10 @@ CONFIG_UCC_GETH=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# CONFIG_WAN=y CONFIG_HDLC=y # CONFIG_HDLC_RAW is not set @@ -543,8 +594,6 @@ CONFIG_HDLC=y # # X.25/LAPB support is disabled # -CONFIG_HDLC_KM=y -CONFIG_FS_UCC_HDLC=y # CONFIG_DLCI is not set CONFIG_PPP=y CONFIG_PPP_MULTILINK=y @@ -600,16 +649,18 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_OF_PLATFORM is not set # CONFIG_SERIAL_QE is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set # CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set -CONFIG_BOOTCOUNT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y @@ -642,20 +693,20 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set -# CONFIG_MCU_MPC8349EMITX is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -677,27 +728,15 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -720,11 +759,16 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set CONFIG_UIO=y # CONFIG_UIO_PDRV is not set # CONFIG_UIO_PDRV_GENIRQ is not set # CONFIG_UIO_SMX is not set # CONFIG_UIO_SERCOS3 is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -736,9 +780,12 @@ CONFIG_UIO=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -748,6 +795,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -772,10 +824,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -796,6 +845,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_UBIFS_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -804,6 +854,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -815,7 +866,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -845,11 +895,13 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_DLM is not set CONFIG_UCC_FAST=y CONFIG_UCC=y +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -859,11 +911,12 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -883,13 +936,18 @@ CONFIG_DEBUG_FS=y # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y - -# -# Tracers -# -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y +CONFIG_PRINT_STACK_DEPTH=64 +# CONFIG_PPC_EMULATED_STATS is not set # CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set # CONFIG_BOOTX_TEXT is not set diff --git a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig index c5c0fe7..ff33a7d 100644 --- a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig @@ -1,26 +1,28 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:06 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:04 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 @@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -107,7 +112,6 @@ CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -120,9 +124,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -135,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -147,7 +162,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -189,6 +204,7 @@ CONFIG_MPC831x_RDB=y # CONFIG_MPC837x_RDB is not set # CONFIG_SBC834x is not set # CONFIG_ASP834x is not set +# CONFIG_KMETER1 is not set CONFIG_PPC_MPC831x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set @@ -234,6 +250,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -254,9 +271,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -366,6 +383,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -383,7 +401,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -503,6 +525,7 @@ CONFIG_MTD_NAND_FSL_ELBC=y CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y CONFIG_OF_SPI=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -539,7 +562,9 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_AT25 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -562,10 +587,6 @@ CONFIG_SCSI_PROC_FS=y # CONFIG_BLK_DEV_SR is not set CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -583,6 +604,7 @@ CONFIG_SCSI_SPI_ATTRS=y CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -591,6 +613,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set @@ -610,7 +633,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_QLOGIC_1280 is not set @@ -643,14 +665,17 @@ CONFIG_MD_RAID1=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -714,6 +739,8 @@ CONFIG_E100=y # CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set @@ -735,8 +762,10 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -924,7 +953,6 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -938,13 +966,18 @@ CONFIG_SPI_MASTER=y # SPI Master Controller Drivers # CONFIG_SPI_BITBANG=y -CONFIG_SPI_MPC83xx=y +# CONFIG_SPI_MPC8xxx is not set # # SPI Protocol Masters # # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -1002,6 +1035,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1056,24 +1090,10 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1135,6 +1155,7 @@ CONFIG_USB_MON=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set @@ -1144,9 +1165,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set +CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PCI=y CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y @@ -1235,8 +1256,9 @@ CONFIG_USB_GADGET_SELECTED=y # CONFIG_USB_GADGET_OMAP is not set # CONFIG_USB_GADGET_PXA25X is not set # CONFIG_USB_GADGET_PXA27X is not set -# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_S3C_HSOTG is not set # CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_S3C2410 is not set # CONFIG_USB_GADGET_M66592 is not set # CONFIG_USB_GADGET_AMD5536UDC is not set # CONFIG_USB_GADGET_FSL_QE is not set @@ -1244,9 +1266,11 @@ CONFIG_USB_GADGET_SELECTED=y CONFIG_USB_GADGET_NET2280=y CONFIG_USB_NET2280=y # CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LANGWELL is not set # CONFIG_USB_GADGET_DUMMY_HCD is not set CONFIG_USB_GADGET_DUALSPEED=y # CONFIG_USB_ZERO is not set +# CONFIG_USB_AUDIO is not set CONFIG_USB_ETH=y CONFIG_USB_ETH_RNDIS=y # CONFIG_USB_GADGETFS is not set @@ -1298,6 +1322,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1332,6 +1357,10 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1351,10 +1380,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1428,6 +1459,7 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set CONFIG_LOCKD=y @@ -1464,7 +1496,46 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # CONFIG_SYSV68_PARTITION is not set -# CONFIG_NLS is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set # CONFIG_BINARY_PRINTF is not set @@ -1488,6 +1559,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1518,6 +1590,9 @@ CONFIG_SCHED_DEBUG=y # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -1529,7 +1604,6 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set @@ -1543,16 +1617,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -1560,6 +1633,9 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set diff --git a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig index af4952f..76237d4 100644 --- a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig @@ -1,26 +1,28 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:06 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:05 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 @@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -107,7 +112,6 @@ CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -120,9 +124,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -135,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -147,7 +162,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -189,6 +204,7 @@ CONFIG_MPC831x_RDB=y # CONFIG_MPC837x_RDB is not set # CONFIG_SBC834x is not set # CONFIG_ASP834x is not set +# CONFIG_KMETER1 is not set CONFIG_PPC_MPC831x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set @@ -234,6 +250,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -254,9 +271,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -366,6 +383,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -383,7 +401,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -503,6 +525,7 @@ CONFIG_MTD_NAND_IDS=y CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y CONFIG_OF_SPI=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -539,7 +562,9 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_AT25 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -562,10 +587,6 @@ CONFIG_SCSI_PROC_FS=y # CONFIG_BLK_DEV_SR is not set CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -583,6 +604,7 @@ CONFIG_SCSI_SPI_ATTRS=y CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -591,6 +613,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set @@ -610,7 +633,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -704,14 +726,17 @@ CONFIG_MD_RAID1=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -775,6 +800,8 @@ CONFIG_E100=y # CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set @@ -796,8 +823,10 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -985,7 +1014,6 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -999,13 +1027,18 @@ CONFIG_SPI_MASTER=y # SPI Master Controller Drivers # CONFIG_SPI_BITBANG=y -CONFIG_SPI_MPC83xx=y +# CONFIG_SPI_MPC8xxx is not set # # SPI Protocol Masters # # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -1063,6 +1096,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1117,24 +1151,10 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1196,6 +1216,7 @@ CONFIG_USB_MON=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set @@ -1205,9 +1226,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set +CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PCI=y CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y @@ -1296,8 +1317,9 @@ CONFIG_USB_GADGET_SELECTED=y # CONFIG_USB_GADGET_OMAP is not set # CONFIG_USB_GADGET_PXA25X is not set # CONFIG_USB_GADGET_PXA27X is not set -# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_S3C_HSOTG is not set # CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_S3C2410 is not set # CONFIG_USB_GADGET_M66592 is not set # CONFIG_USB_GADGET_AMD5536UDC is not set # CONFIG_USB_GADGET_FSL_QE is not set @@ -1305,9 +1327,11 @@ CONFIG_USB_GADGET_SELECTED=y CONFIG_USB_GADGET_NET2280=y CONFIG_USB_NET2280=y # CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LANGWELL is not set # CONFIG_USB_GADGET_DUMMY_HCD is not set CONFIG_USB_GADGET_DUALSPEED=y # CONFIG_USB_ZERO is not set +# CONFIG_USB_AUDIO is not set CONFIG_USB_ETH=y CONFIG_USB_ETH_RNDIS=y # CONFIG_USB_GADGETFS is not set @@ -1359,6 +1383,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1393,6 +1418,10 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1412,10 +1441,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1489,6 +1520,7 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set CONFIG_LOCKD=y @@ -1525,7 +1557,46 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # CONFIG_SYSV68_PARTITION is not set -# CONFIG_NLS is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set # CONFIG_BINARY_PRINTF is not set @@ -1549,6 +1620,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1579,6 +1651,9 @@ CONFIG_SCHED_DEBUG=y # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -1590,7 +1665,6 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set @@ -1604,16 +1678,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -1621,6 +1694,9 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set diff --git a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig index 8c8f660..e0e36a1 100644 --- a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig @@ -1,26 +1,28 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:07 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:06 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 @@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -107,7 +112,6 @@ CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -120,9 +124,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -135,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -147,7 +162,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -189,6 +204,7 @@ CONFIG_MPC832x_MDS=y # CONFIG_MPC837x_RDB is not set # CONFIG_SBC834x is not set # CONFIG_ASP834x is not set +# CONFIG_KMETER1 is not set CONFIG_PPC_MPC832x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set @@ -235,6 +251,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -255,9 +272,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -366,6 +383,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -383,7 +401,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -404,6 +426,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_MTD is not set CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -438,7 +461,9 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -461,10 +486,6 @@ CONFIG_SCSI_PROC_FS=y # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -482,6 +503,7 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -490,6 +512,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set @@ -509,7 +532,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_QLOGIC_1280 is not set @@ -532,14 +554,17 @@ CONFIG_SCSI_LOWLEVEL=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -586,6 +611,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -605,11 +631,13 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y # CONFIG_GIANFAR is not set CONFIG_UCC_GETH=y # CONFIG_UGETH_MAGIC_PACKET is not set # CONFIG_UGETH_TX_ON_DEMAND is not set +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -787,13 +815,17 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -848,6 +880,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -896,23 +929,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -996,6 +1015,7 @@ CONFIG_RTC_DRV_DS1374=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1023,6 +1043,10 @@ CONFIG_RTC_DRV_DS1374=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1042,10 +1066,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1108,6 +1134,7 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set CONFIG_LOCKD=y @@ -1165,6 +1192,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1190,22 +1218,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set diff --git a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig index 227dbba..4f27d45 100644 --- a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig @@ -1,26 +1,28 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:08 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:07 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 @@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -107,7 +112,6 @@ CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -120,9 +124,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -135,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -147,7 +162,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -189,6 +204,7 @@ CONFIG_MPC832x_RDB=y # CONFIG_MPC837x_RDB is not set # CONFIG_SBC834x is not set # CONFIG_ASP834x is not set +# CONFIG_KMETER1 is not set CONFIG_PPC_MPC832x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set @@ -235,6 +251,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -255,9 +272,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -366,6 +383,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -383,7 +401,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -405,6 +427,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y CONFIG_OF_SPI=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -441,7 +464,9 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_AT25 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -464,10 +489,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -485,6 +506,7 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -493,6 +515,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set @@ -512,7 +535,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_QLOGIC_1280 is not set @@ -535,14 +557,17 @@ CONFIG_SCSI_LOWLEVEL=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -590,6 +615,8 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -609,11 +636,13 @@ CONFIG_E1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y # CONFIG_GIANFAR is not set CONFIG_UCC_GETH=y # CONFIG_UGETH_MAGIC_PACKET is not set # CONFIG_UGETH_TX_ON_DEMAND is not set +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -804,7 +833,6 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -817,13 +845,18 @@ CONFIG_SPI_MASTER=y # SPI Master Controller Drivers # CONFIG_SPI_BITBANG=y -CONFIG_SPI_MPC83xx=y +# CONFIG_SPI_MPC8xxx is not set # # SPI Protocol Masters # # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -881,6 +914,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -935,24 +969,10 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1014,6 +1034,7 @@ CONFIG_USB_MON=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set @@ -1023,9 +1044,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set +CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PCI=y CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y @@ -1127,6 +1148,8 @@ CONFIG_MMC_BLOCK_BOUNCE=y # CONFIG_MMC_WBSD is not set # CONFIG_MMC_TIFM_SD is not set CONFIG_MMC_SPI=y +# CONFIG_MMC_CB710 is not set +# CONFIG_MMC_VIA_SDMMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set @@ -1136,6 +1159,10 @@ CONFIG_MMC_SPI=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1155,10 +1182,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1224,6 +1253,7 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set CONFIG_LOCKD=y @@ -1325,6 +1355,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1350,22 +1381,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set diff --git a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig index 24ee7fc..648dac0 100644 --- a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig @@ -1,26 +1,28 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:09 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:07 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 @@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -107,7 +112,6 @@ CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -120,9 +124,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -135,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -147,7 +162,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -189,6 +204,7 @@ CONFIG_MPC834x_ITX=y # CONFIG_MPC837x_RDB is not set # CONFIG_SBC834x is not set # CONFIG_ASP834x is not set +# CONFIG_KMETER1 is not set CONFIG_PPC_MPC834x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set @@ -234,6 +250,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -254,9 +271,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -365,6 +382,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -382,7 +400,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -487,6 +509,7 @@ CONFIG_MTD_PHYSMAP=y CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y CONFIG_OF_SPI=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -523,7 +546,9 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_AT25 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y @@ -594,10 +619,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_BLK_DEV_SR is not set CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -615,6 +636,7 @@ CONFIG_SCSI_SPI_ATTRS=y CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -623,6 +645,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set @@ -642,7 +665,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -737,14 +759,17 @@ CONFIG_MD_RAID1=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -791,8 +816,10 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -960,7 +987,6 @@ CONFIG_I2C_MPC=y CONFIG_SENSORS_PCF8574=y # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -973,13 +999,18 @@ CONFIG_SPI_MASTER=y # SPI Master Controller Drivers # CONFIG_SPI_BITBANG=y -CONFIG_SPI_MPC83xx=y +# CONFIG_SPI_MPC8xxx is not set # # SPI Protocol Masters # # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -1026,24 +1057,10 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1085,6 +1102,7 @@ CONFIG_USB_MON=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set @@ -1208,6 +1226,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1242,6 +1261,10 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1261,10 +1284,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1331,6 +1356,7 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set CONFIG_LOCKD=y @@ -1429,6 +1455,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1454,22 +1481,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set diff --git a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig index 7f39543..bf6deb8 100644 --- a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig @@ -1,26 +1,28 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:10 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:08 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 @@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -107,7 +112,6 @@ CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -120,9 +124,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -135,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -147,7 +162,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -189,6 +204,7 @@ CONFIG_MPC834x_ITX=y # CONFIG_MPC837x_RDB is not set # CONFIG_SBC834x is not set # CONFIG_ASP834x is not set +# CONFIG_KMETER1 is not set CONFIG_PPC_MPC834x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set @@ -234,6 +250,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -254,9 +271,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -365,6 +382,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -382,7 +400,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -487,6 +509,7 @@ CONFIG_MTD_PHYSMAP=y CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y CONFIG_OF_SPI=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -523,7 +546,9 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_AT25 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -546,10 +571,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_BLK_DEV_SR is not set CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -567,6 +588,7 @@ CONFIG_SCSI_SPI_ATTRS=y CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -575,6 +597,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set @@ -594,7 +617,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_QLOGIC_1280 is not set @@ -617,14 +639,17 @@ CONFIG_SCSI_LOWLEVEL=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -671,8 +696,10 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -840,7 +867,6 @@ CONFIG_I2C_MPC=y CONFIG_SENSORS_PCF8574=y # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -853,13 +879,18 @@ CONFIG_SPI_MASTER=y # SPI Master Controller Drivers # CONFIG_SPI_BITBANG=y -CONFIG_SPI_MPC83xx=y +# CONFIG_SPI_MPC8xxx is not set # # SPI Protocol Masters # # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -906,24 +937,10 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -965,6 +982,7 @@ CONFIG_USB_MON=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set @@ -1087,6 +1105,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1121,6 +1140,10 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1140,10 +1163,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1210,6 +1235,7 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set CONFIG_LOCKD=y @@ -1308,6 +1334,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1333,22 +1360,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set diff --git a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig index 1cd1fca..3236c47 100644 --- a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig @@ -1,26 +1,28 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:11 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:09 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 @@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -107,7 +112,6 @@ CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -120,9 +124,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -135,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -147,7 +162,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -189,6 +204,7 @@ CONFIG_MPC834x_MDS=y # CONFIG_MPC837x_RDB is not set # CONFIG_SBC834x is not set # CONFIG_ASP834x is not set +# CONFIG_KMETER1 is not set CONFIG_PPC_MPC834x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set @@ -234,6 +250,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -254,9 +271,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -365,6 +382,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -382,7 +400,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -403,6 +425,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_MTD is not set CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -437,7 +460,9 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -457,14 +482,17 @@ CONFIG_HAVE_IDE=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -527,6 +555,7 @@ CONFIG_E100=y # CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set +# CONFIG_KS8842 is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set @@ -548,8 +577,10 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -724,13 +755,17 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -785,6 +820,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -833,23 +869,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -933,6 +955,7 @@ CONFIG_RTC_DRV_DS1374=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -960,6 +983,10 @@ CONFIG_RTC_DRV_DS1374=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -979,10 +1006,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1045,6 +1074,7 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set CONFIG_LOCKD=y @@ -1100,6 +1130,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1125,22 +1156,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set diff --git a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig index ce51773..8c5299d 100644 --- a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig @@ -1,26 +1,28 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:12 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:10 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 @@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -107,7 +112,6 @@ CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -120,9 +124,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -135,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -147,7 +162,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -189,6 +204,7 @@ CONFIG_MPC836x_MDS=y # CONFIG_MPC837x_RDB is not set # CONFIG_SBC834x is not set # CONFIG_ASP834x is not set +# CONFIG_KMETER1 is not set # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set # CONFIG_AMIGAONE is not set @@ -233,6 +249,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -253,9 +270,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -364,6 +381,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -381,7 +399,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -485,6 +507,7 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -519,7 +542,9 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -542,10 +567,6 @@ CONFIG_SCSI_PROC_FS=y # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -563,6 +584,7 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -571,6 +593,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set @@ -590,7 +613,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_QLOGIC_1280 is not set @@ -613,14 +635,17 @@ CONFIG_SCSI_LOWLEVEL=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -667,6 +692,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -686,11 +712,13 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y # CONFIG_GIANFAR is not set CONFIG_UCC_GETH=y # CONFIG_UGETH_MAGIC_PACKET is not set # CONFIG_UGETH_TX_ON_DEMAND is not set +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -868,13 +896,17 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -929,6 +961,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -977,23 +1010,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1077,6 +1096,7 @@ CONFIG_RTC_DRV_DS1374=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1104,6 +1124,10 @@ CONFIG_RTC_DRV_DS1374=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1123,10 +1147,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1190,6 +1216,7 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set CONFIG_LOCKD=y @@ -1247,6 +1274,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1272,22 +1300,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set diff --git a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig index 7f1d138..ff31667 100644 --- a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig +++ b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig @@ -1,26 +1,28 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:13 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:12 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 @@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set @@ -54,12 +57,14 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -108,7 +113,6 @@ CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -121,9 +125,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -136,6 +147,10 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -148,7 +163,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -190,6 +205,7 @@ CONFIG_MPC836x_RDK=y # CONFIG_MPC837x_RDB is not set # CONFIG_SBC834x is not set # CONFIG_ASP834x is not set +# CONFIG_KMETER1 is not set # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set # CONFIG_AMIGAONE is not set @@ -233,6 +249,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -253,9 +270,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -366,6 +383,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -383,7 +401,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -498,6 +520,7 @@ CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y CONFIG_OF_I2C=y CONFIG_OF_SPI=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -533,7 +556,9 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_AT25 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -553,14 +578,17 @@ CONFIG_HAVE_IDE=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -607,11 +635,13 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y # CONFIG_GIANFAR is not set CONFIG_UCC_GETH=y # CONFIG_UGETH_MAGIC_PACKET is not set # CONFIG_UGETH_TX_ON_DEMAND is not set +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -777,7 +807,6 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -791,13 +820,18 @@ CONFIG_SPI_MASTER=y # CONFIG_SPI_BITBANG=y # CONFIG_SPI_GPIO is not set -CONFIG_SPI_MPC83xx=y +# CONFIG_SPI_MPC8xxx is not set # # SPI Protocol Masters # CONFIG_SPI_SPIDEV=y # CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y @@ -865,23 +899,10 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -990,6 +1011,10 @@ CONFIG_HID=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1009,10 +1034,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1086,6 +1113,7 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set CONFIG_LOCKD=y @@ -1145,6 +1173,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1170,22 +1199,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set diff --git a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig index bf636fd..e285ec0 100644 --- a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig @@ -1,26 +1,28 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:12 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:11 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 @@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -108,7 +113,6 @@ CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -121,8 +125,15 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -136,6 +147,10 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -148,7 +163,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -190,6 +205,7 @@ CONFIG_MPC837x_MDS=y # CONFIG_MPC837x_RDB is not set # CONFIG_SBC834x is not set # CONFIG_ASP834x is not set +# CONFIG_KMETER1 is not set CONFIG_PPC_MPC837x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set @@ -234,6 +250,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -254,9 +271,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -365,6 +382,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -382,7 +400,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -403,6 +425,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_MTD is not set CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -437,7 +460,9 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -460,10 +485,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_BLK_DEV_SR is not set CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -481,6 +502,7 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -489,6 +511,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set @@ -508,7 +531,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -592,14 +614,17 @@ CONFIG_ATA_SFF=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -646,6 +671,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -665,8 +691,10 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -844,13 +872,17 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -905,6 +937,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -953,23 +986,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1026,6 +1045,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1045,10 +1068,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1111,6 +1136,7 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set CONFIG_LOCKD=y @@ -1170,6 +1196,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1193,22 +1220,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set diff --git a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig index fe6454e..1ab3e4c 100644 --- a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig @@ -1,26 +1,28 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:14 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:13 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 @@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -108,7 +113,6 @@ CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -121,8 +125,15 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -136,6 +147,10 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -148,7 +163,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -190,6 +205,7 @@ CONFIG_PPC_83xx=y CONFIG_MPC837x_RDB=y # CONFIG_SBC834x is not set # CONFIG_ASP834x is not set +# CONFIG_KMETER1 is not set CONFIG_PPC_MPC837x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set @@ -234,6 +250,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -254,9 +271,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -360,6 +377,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -377,7 +395,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -398,6 +420,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_MTD is not set CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -433,7 +456,9 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -456,10 +481,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_BLK_DEV_SR is not set CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -476,6 +497,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -484,6 +506,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set @@ -503,7 +526,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -598,14 +620,17 @@ CONFIG_MD_RAID6_PQ=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -652,6 +677,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -671,8 +697,10 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -842,13 +870,17 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -903,6 +935,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -956,24 +989,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1011,7 +1029,7 @@ CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y -# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_DRAGONRISE is not set CONFIG_HID_EZKEY=y # CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y @@ -1028,10 +1046,11 @@ CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y -# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set # CONFIG_HID_TOPSEED is not set -CONFIG_THRUSTMASTER_FF=m -CONFIG_ZEROPLUS_FF=m +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1057,6 +1076,7 @@ CONFIG_USB_MON=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set @@ -1141,6 +1161,10 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1160,10 +1184,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1226,6 +1252,7 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set CONFIG_LOCKD=y @@ -1262,7 +1289,46 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # CONFIG_SYSV68_PARTITION is not set -# CONFIG_NLS is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set # CONFIG_BINARY_PRINTF is not set @@ -1285,6 +1351,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1308,22 +1375,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set diff --git a/arch/powerpc/configs/83xx/sbc834x_defconfig b/arch/powerpc/configs/83xx/sbc834x_defconfig index fe08f67..a592b5e 100644 --- a/arch/powerpc/configs/83xx/sbc834x_defconfig +++ b/arch/powerpc/configs/83xx/sbc834x_defconfig @@ -1,26 +1,28 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:15 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:13 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 @@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -107,7 +112,6 @@ CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -120,8 +124,15 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -134,6 +145,10 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -146,7 +161,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -188,6 +203,7 @@ CONFIG_PPC_83xx=y # CONFIG_MPC837x_RDB is not set CONFIG_SBC834x=y # CONFIG_ASP834x is not set +# CONFIG_KMETER1 is not set CONFIG_PPC_MPC834x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set @@ -232,6 +248,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -252,9 +269,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -363,6 +380,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -380,7 +398,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -401,6 +423,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_MTD is not set CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -435,7 +458,9 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -455,14 +480,17 @@ CONFIG_HAVE_IDE=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -509,6 +537,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -528,8 +557,10 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -688,13 +719,17 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -749,6 +784,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -797,23 +833,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -851,6 +873,10 @@ CONFIG_HID=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -862,10 +888,12 @@ CONFIG_HID=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -928,6 +956,7 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set CONFIG_LOCKD=y @@ -971,6 +1000,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -994,22 +1024,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set diff --git a/arch/powerpc/configs/85xx/ksi8560_defconfig b/arch/powerpc/configs/85xx/ksi8560_defconfig index 09146dd..ff04e10 100644 --- a/arch/powerpc/configs/85xx/ksi8560_defconfig +++ b/arch/powerpc/configs/85xx/ksi8560_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:16 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:14 2009 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set CONFIG_PPC_85xx=y # CONFIG_PPC_8xx is not set # CONFIG_40x is not set @@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set @@ -57,11 +58,13 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -108,7 +111,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -121,8 +123,15 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -136,6 +145,11 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -143,7 +157,7 @@ CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -176,6 +190,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_DS is not set # CONFIG_SOCRATES is not set CONFIG_KSI8560=y +# CONFIG_XES_MPC85xx is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set @@ -224,6 +239,7 @@ CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -242,9 +258,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -346,6 +362,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -363,7 +380,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -466,6 +487,7 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -520,7 +542,6 @@ CONFIG_IDE_PROC_FS=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -560,6 +581,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set CONFIG_FS_ENET_HAS_FCC=y @@ -567,6 +589,7 @@ CONFIG_FS_ENET_MDIO_FCC=y CONFIG_NETDEV_1000=y CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y +# CONFIG_MV643XX_ETH is not set CONFIG_NETDEV_10000=y # @@ -654,6 +677,11 @@ CONFIG_GEN_RTC=y # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y @@ -710,22 +738,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -777,6 +790,10 @@ CONFIG_USB_SUPPORT=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -797,10 +814,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -916,6 +935,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -946,6 +966,9 @@ CONFIG_SCHED_DEBUG=y # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -958,7 +981,6 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set @@ -972,16 +994,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -990,9 +1011,13 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_PPC_EMULATED_STATS is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set diff --git a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig index 7b43be7..fb10cc8 100644 --- a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig +++ b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:17 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:15 2009 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set CONFIG_PPC_85xx=y # CONFIG_PPC_8xx is not set # CONFIG_40x is not set @@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -56,11 +57,13 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -111,7 +114,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -124,8 +126,15 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -138,6 +147,10 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -145,7 +158,7 @@ CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -178,6 +191,7 @@ CONFIG_MPC8540_ADS=y # CONFIG_MPC85xx_DS is not set # CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set +# CONFIG_XES_MPC85xx is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set @@ -226,6 +240,7 @@ CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -244,9 +259,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -348,6 +363,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -365,7 +381,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -387,6 +407,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_OF_DEVICE=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -423,7 +444,6 @@ CONFIG_HAVE_IDE=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -462,9 +482,11 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set CONFIG_NETDEV_1000=y CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y +# CONFIG_MV643XX_ETH is not set CONFIG_NETDEV_10000=y # @@ -555,6 +577,11 @@ CONFIG_GEN_RTC=y # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -590,22 +617,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -657,6 +669,10 @@ CONFIG_USB_SUPPORT=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -676,10 +692,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -794,6 +812,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -824,6 +843,9 @@ CONFIG_SCHED_DEBUG=y # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -835,7 +857,6 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set @@ -849,16 +870,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -866,6 +886,9 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set diff --git a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig index 62adb71..5c8ce69 100644 --- a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig +++ b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:17 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:16 2009 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set CONFIG_PPC_85xx=y # CONFIG_PPC_8xx is not set # CONFIG_40x is not set @@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set @@ -57,11 +58,13 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -112,7 +115,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -125,9 +127,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -141,6 +150,10 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -148,7 +161,7 @@ CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -181,6 +194,7 @@ CONFIG_MPC8560_ADS=y # CONFIG_MPC85xx_DS is not set # CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set +# CONFIG_XES_MPC85xx is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set @@ -229,6 +243,7 @@ CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -247,9 +262,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -360,6 +375,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -377,7 +393,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -400,6 +420,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_MTD is not set CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -431,6 +452,7 @@ CONFIG_MISC_DEVICES=y # EEPROM support # # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -450,14 +472,17 @@ CONFIG_HAVE_IDE=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -504,6 +529,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set @@ -527,8 +553,10 @@ CONFIG_E1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -646,6 +674,11 @@ CONFIG_GEN_RTC=y CONFIG_DEVPORT=y # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y @@ -707,22 +740,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -779,6 +797,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -798,10 +820,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -916,6 +940,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -946,6 +971,9 @@ CONFIG_SCHED_DEBUG=y # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -957,7 +985,6 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set @@ -971,16 +998,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -988,6 +1014,9 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set diff --git a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig index 41209e3..158e63e 100644 --- a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig +++ b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:18 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:17 2009 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set CONFIG_PPC_85xx=y # CONFIG_PPC_8xx is not set # CONFIG_40x is not set @@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -56,11 +57,13 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -111,7 +114,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -124,9 +126,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -139,6 +148,10 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -146,7 +159,7 @@ CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -179,6 +192,7 @@ CONFIG_MPC85xx_CDS=y # CONFIG_MPC85xx_DS is not set # CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set +# CONFIG_XES_MPC85xx is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set @@ -227,6 +241,7 @@ CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -245,9 +260,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -358,6 +373,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -375,7 +391,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -397,6 +417,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_OF_DEVICE=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -428,6 +449,7 @@ CONFIG_MISC_DEVICES=y # EEPROM support # # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y @@ -502,14 +524,17 @@ CONFIG_BLK_DEV_IDEDMA=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -556,6 +581,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -575,8 +601,10 @@ CONFIG_E1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -698,6 +726,11 @@ CONFIG_GEN_RTC=y CONFIG_DEVPORT=y # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -737,22 +770,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -809,6 +827,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -828,10 +850,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -946,6 +970,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -976,6 +1001,9 @@ CONFIG_SCHED_DEBUG=y # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -987,7 +1015,6 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set @@ -1001,16 +1028,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -1018,6 +1044,9 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set diff --git a/arch/powerpc/configs/85xx/sbc8548_defconfig b/arch/powerpc/configs/85xx/sbc8548_defconfig index 6c36c9c..2726fca1 100644 --- a/arch/powerpc/configs/85xx/sbc8548_defconfig +++ b/arch/powerpc/configs/85xx/sbc8548_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:19 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:18 2009 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set CONFIG_PPC_85xx=y # CONFIG_PPC_8xx is not set # CONFIG_40x is not set @@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -56,11 +57,13 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -110,7 +113,6 @@ CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -123,8 +125,15 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -137,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -144,7 +157,7 @@ CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -177,6 +190,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_DS is not set # CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set +# CONFIG_XES_MPC85xx is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set @@ -224,6 +238,7 @@ CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -242,9 +257,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -354,6 +369,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -371,7 +387,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -391,6 +411,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_OF_DEVICE=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -422,6 +443,7 @@ CONFIG_MISC_DEVICES=y # EEPROM support # # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -441,14 +463,17 @@ CONFIG_HAVE_IDE=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -495,6 +520,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -514,8 +540,10 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -637,6 +665,11 @@ CONFIG_GEN_RTC=y CONFIG_DEVPORT=y # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -676,22 +709,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -721,6 +739,10 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -732,10 +754,12 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -838,6 +862,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -861,22 +886,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set diff --git a/arch/powerpc/configs/85xx/sbc8560_defconfig b/arch/powerpc/configs/85xx/sbc8560_defconfig index 4aaf1a6..b0c4698 100644 --- a/arch/powerpc/configs/85xx/sbc8560_defconfig +++ b/arch/powerpc/configs/85xx/sbc8560_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:20 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:19 2009 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set CONFIG_PPC_85xx=y # CONFIG_PPC_8xx is not set # CONFIG_40x is not set @@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -56,11 +57,13 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -111,7 +114,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -124,7 +126,14 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -137,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -144,7 +157,7 @@ CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -177,6 +190,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_DS is not set # CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set +# CONFIG_XES_MPC85xx is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set @@ -224,6 +238,7 @@ CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -242,9 +257,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -346,6 +361,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -363,7 +379,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -385,6 +405,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_OF_DEVICE=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -421,7 +442,6 @@ CONFIG_HAVE_IDE=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -460,9 +480,11 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set CONFIG_NETDEV_1000=y CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y +# CONFIG_MV643XX_ETH is not set CONFIG_NETDEV_10000=y # @@ -551,6 +573,11 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -586,22 +613,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -690,6 +702,10 @@ CONFIG_RTC_DRV_M48T59=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -701,10 +717,12 @@ CONFIG_RTC_DRV_M48T59=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -819,6 +837,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -848,6 +867,9 @@ CONFIG_SCHED_DEBUG=y # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -859,7 +881,6 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set @@ -873,16 +894,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -890,6 +910,9 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set diff --git a/arch/powerpc/configs/85xx/socrates_defconfig b/arch/powerpc/configs/85xx/socrates_defconfig index 7998458..04c85da 100644 --- a/arch/powerpc/configs/85xx/socrates_defconfig +++ b/arch/powerpc/configs/85xx/socrates_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:21 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:19 2009 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set CONFIG_PPC_85xx=y # CONFIG_PPC_8xx is not set # CONFIG_40x is not set @@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -56,11 +57,13 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -109,7 +112,6 @@ CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set -# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y @@ -122,9 +124,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -137,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -149,7 +162,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -182,6 +195,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_DS is not set CONFIG_SOCRATES=y # CONFIG_KSI8560 is not set +# CONFIG_XES_MPC85xx is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set @@ -229,6 +243,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -247,9 +262,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -357,6 +372,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -373,6 +389,7 @@ CONFIG_CAN_BCM=y # CAN Device Drivers # # CONFIG_CAN_VCAN is not set +# CONFIG_CAN_DEV is not set # CONFIG_CAN_DEBUG_DEVICES is not set # CONFIG_IRDA is not set # CONFIG_BT is not set @@ -382,7 +399,11 @@ CONFIG_WIRELESS=y # CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -499,6 +520,7 @@ CONFIG_MTD_NAND_SOCRATES=y CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y CONFIG_OF_SPI=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -535,7 +557,9 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_AT25 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -558,10 +582,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -588,14 +608,17 @@ CONFIG_SCSI_WAIT_SCAN=m # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -643,6 +666,8 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -662,8 +687,10 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -733,6 +760,7 @@ CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_AD7879_I2C is not set # CONFIG_TOUCHSCREEN_AD7879_SPI is not set # CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_EETI is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set @@ -746,6 +774,7 @@ CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set # CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_TOUCHSCREEN_W90X900 is not set # CONFIG_INPUT_MISC is not set # @@ -862,7 +891,6 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -875,12 +903,18 @@ CONFIG_SPI_MASTER=y # SPI Master Controller Drivers # # CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_MPC8xxx is not set # # SPI Protocol Masters # # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -938,6 +972,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -973,24 +1008,10 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1110,7 +1131,7 @@ CONFIG_USB_HID=y # CONFIG_HID_CHERRY is not set # CONFIG_HID_CHICONY is not set # CONFIG_HID_CYPRESS is not set -# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_DRAGONRISE is not set # CONFIG_HID_EZKEY is not set # CONFIG_HID_KYE is not set # CONFIG_HID_GYRATION is not set @@ -1124,10 +1145,11 @@ CONFIG_USB_HID=y # CONFIG_HID_SAMSUNG is not set # CONFIG_HID_SONY is not set # CONFIG_HID_SUNPLUS is not set -# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set # CONFIG_HID_TOPSEED is not set -# CONFIG_THRUSTMASTER_FF is not set -# CONFIG_ZEROPLUS_FF is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1153,6 +1175,7 @@ CONFIG_USB_MON=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set @@ -1162,9 +1185,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set +CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PCI=y CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y @@ -1284,6 +1307,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1318,6 +1342,10 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1337,10 +1365,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1449,7 +1479,46 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # CONFIG_SYSV68_PARTITION is not set -# CONFIG_NLS is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set # CONFIG_BINARY_PRINTF is not set @@ -1473,6 +1542,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1498,22 +1568,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set diff --git a/arch/powerpc/configs/85xx/stx_gp3_defconfig b/arch/powerpc/configs/85xx/stx_gp3_defconfig index bd1bfcd..e7e81d6 100644 --- a/arch/powerpc/configs/85xx/stx_gp3_defconfig +++ b/arch/powerpc/configs/85xx/stx_gp3_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:22 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:20 2009 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set CONFIG_PPC_85xx=y # CONFIG_PPC_8xx is not set # CONFIG_40x is not set @@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set @@ -57,11 +58,13 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -112,7 +115,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -125,9 +127,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -142,6 +151,10 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -153,7 +166,7 @@ CONFIG_MODULES=y CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -186,6 +199,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_DS is not set # CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set +# CONFIG_XES_MPC85xx is not set CONFIG_STX_GP3=y # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set @@ -234,6 +248,7 @@ CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -252,9 +267,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -425,6 +440,7 @@ CONFIG_IP_NF_FILTER=m # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -442,7 +458,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -466,6 +486,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y CONFIG_OF_I2C=m +CONFIG_OF_MDIO=y CONFIG_PARPORT=m CONFIG_PARPORT_PC=m # CONFIG_PARPORT_PC_FIFO is not set @@ -507,7 +528,9 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y @@ -581,10 +604,6 @@ CONFIG_BLK_DEV_SR=m # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=m # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_LOGGING is not set @@ -602,6 +621,7 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -610,6 +630,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set @@ -631,7 +652,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_PPA is not set # CONFIG_SCSI_IMM is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_QLOGIC_1280 is not set @@ -654,14 +674,17 @@ CONFIG_SCSI_LOWLEVEL=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -708,6 +731,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_NET_POCKET is not set # CONFIG_ATL2 is not set # CONFIG_FS_ENET is not set @@ -729,8 +753,10 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -802,12 +828,13 @@ CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_MATRIX is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set -# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y @@ -821,6 +848,7 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_MOUSE_GPIO is not set +# CONFIG_MOUSE_SYNAPTICS_I2C is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set @@ -911,6 +939,7 @@ CONFIG_I2C_ALGOBIT=m # I2C system bus drivers (mostly embedded / system-on-chip) # # CONFIG_I2C_CPM is not set +# CONFIG_I2C_DESIGNWARE is not set # CONFIG_I2C_GPIO is not set # CONFIG_I2C_MPC is not set # CONFIG_I2C_OCORES is not set @@ -941,13 +970,17 @@ CONFIG_I2C_ALGOBIT=m # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y @@ -1027,6 +1060,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1060,23 +1094,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1143,6 +1163,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1162,10 +1186,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1316,6 +1342,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1346,6 +1373,9 @@ CONFIG_SCHED_DEBUG=y # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -1358,7 +1388,6 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set @@ -1372,16 +1401,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -1389,6 +1417,9 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set diff --git a/arch/powerpc/configs/85xx/tqm8540_defconfig b/arch/powerpc/configs/85xx/tqm8540_defconfig index 7676001..2c40752 100644 --- a/arch/powerpc/configs/85xx/tqm8540_defconfig +++ b/arch/powerpc/configs/85xx/tqm8540_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:23 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:21 2009 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set CONFIG_PPC_85xx=y # CONFIG_PPC_8xx is not set # CONFIG_40x is not set @@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -56,11 +57,13 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -109,7 +112,6 @@ CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set -# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y @@ -122,9 +124,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -137,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -144,7 +157,7 @@ CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -177,6 +190,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_DS is not set # CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set +# CONFIG_XES_MPC85xx is not set # CONFIG_STX_GP3 is not set CONFIG_TQM8540=y # CONFIG_TQM8541 is not set @@ -225,6 +239,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -243,9 +258,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -353,6 +368,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -370,7 +386,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -471,6 +491,7 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -505,7 +526,9 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y @@ -580,14 +603,17 @@ CONFIG_BLK_DEV_IDEDMA=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -650,6 +676,7 @@ CONFIG_E100=y # CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set +# CONFIG_KS8842 is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set @@ -671,8 +698,10 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -850,13 +879,17 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -911,6 +944,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -945,23 +979,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1018,6 +1038,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1037,10 +1061,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1167,6 +1193,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1192,22 +1219,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set diff --git a/arch/powerpc/configs/85xx/tqm8541_defconfig b/arch/powerpc/configs/85xx/tqm8541_defconfig index 52fafc0..845731d 100644 --- a/arch/powerpc/configs/85xx/tqm8541_defconfig +++ b/arch/powerpc/configs/85xx/tqm8541_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:23 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:22 2009 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set CONFIG_PPC_85xx=y # CONFIG_PPC_8xx is not set # CONFIG_40x is not set @@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set @@ -57,11 +58,13 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -110,7 +113,6 @@ CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set -# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y @@ -123,9 +125,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -139,6 +148,10 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -146,7 +159,7 @@ CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -179,6 +192,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_DS is not set # CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set +# CONFIG_XES_MPC85xx is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set CONFIG_TQM8541=y @@ -228,6 +242,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -246,9 +261,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -356,6 +371,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -373,7 +389,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -475,6 +495,7 @@ CONFIG_MTD_CFI_UTIL=y CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -509,7 +530,9 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y @@ -584,14 +607,17 @@ CONFIG_BLK_DEV_IDEDMA=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -654,6 +680,7 @@ CONFIG_E100=y # CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set +# CONFIG_KS8842 is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set @@ -676,8 +703,10 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -831,6 +860,7 @@ CONFIG_I2C_HELPER_AUTO=y # I2C system bus drivers (mostly embedded / system-on-chip) # # CONFIG_I2C_CPM is not set +# CONFIG_I2C_DESIGNWARE is not set # CONFIG_I2C_GPIO is not set CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set @@ -859,13 +889,17 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y @@ -944,6 +978,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -979,23 +1014,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1052,6 +1073,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1071,10 +1096,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1201,6 +1228,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1226,22 +1254,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set diff --git a/arch/powerpc/configs/85xx/tqm8548_defconfig b/arch/powerpc/configs/85xx/tqm8548_defconfig index 8b4faae7..4f228a9 100644 --- a/arch/powerpc/configs/85xx/tqm8548_defconfig +++ b/arch/powerpc/configs/85xx/tqm8548_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:24 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:23 2009 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set CONFIG_PPC_85xx=y # CONFIG_PPC_8xx is not set # CONFIG_40x is not set @@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -56,11 +57,13 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -111,7 +114,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -124,9 +126,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -140,6 +149,10 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -152,7 +165,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -185,6 +198,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_DS is not set # CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set +# CONFIG_XES_MPC85xx is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set @@ -234,6 +248,7 @@ CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -252,9 +267,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -281,6 +296,8 @@ CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y CONFIG_PCIEPORTBUS=y CONFIG_PCIEAER=y +# CONFIG_PCIE_ECRC is not set +# CONFIG_PCIEAER_INJECT is not set # CONFIG_PCIEASPM is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set @@ -368,6 +385,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -497,6 +515,7 @@ CONFIG_MTD_NAND_FSL_UPM=y # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -531,7 +550,9 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -551,14 +572,17 @@ CONFIG_HAVE_IDE=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -605,6 +629,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -624,8 +649,10 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -801,13 +828,17 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -862,6 +893,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -896,23 +928,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -977,6 +995,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1004,6 +1023,10 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1015,10 +1038,12 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1145,6 +1170,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1175,6 +1201,9 @@ CONFIG_SCHED_DEBUG=y # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -1187,7 +1216,6 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set @@ -1201,16 +1229,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -1218,6 +1245,9 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set diff --git a/arch/powerpc/configs/85xx/tqm8555_defconfig b/arch/powerpc/configs/85xx/tqm8555_defconfig index 1703609..9196724 100644 --- a/arch/powerpc/configs/85xx/tqm8555_defconfig +++ b/arch/powerpc/configs/85xx/tqm8555_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:25 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:24 2009 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set CONFIG_PPC_85xx=y # CONFIG_PPC_8xx is not set # CONFIG_40x is not set @@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set @@ -57,11 +58,13 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -110,7 +113,6 @@ CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set -# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y @@ -123,9 +125,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -139,6 +148,10 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -146,7 +159,7 @@ CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -179,6 +192,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_DS is not set # CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set +# CONFIG_XES_MPC85xx is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set @@ -228,6 +242,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -246,9 +261,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -356,6 +371,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -373,7 +389,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -475,6 +495,7 @@ CONFIG_MTD_CFI_UTIL=y CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -509,7 +530,9 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y @@ -584,14 +607,17 @@ CONFIG_BLK_DEV_IDEDMA=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -654,6 +680,7 @@ CONFIG_E100=y # CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set +# CONFIG_KS8842 is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set @@ -676,8 +703,10 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -831,6 +860,7 @@ CONFIG_I2C_HELPER_AUTO=y # I2C system bus drivers (mostly embedded / system-on-chip) # # CONFIG_I2C_CPM is not set +# CONFIG_I2C_DESIGNWARE is not set # CONFIG_I2C_GPIO is not set CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set @@ -859,13 +889,17 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y @@ -944,6 +978,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -979,23 +1014,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1052,6 +1073,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1071,10 +1096,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1201,6 +1228,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1226,22 +1254,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set diff --git a/arch/powerpc/configs/85xx/tqm8560_defconfig b/arch/powerpc/configs/85xx/tqm8560_defconfig index f41cc24..2e49a6e 100644 --- a/arch/powerpc/configs/85xx/tqm8560_defconfig +++ b/arch/powerpc/configs/85xx/tqm8560_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:26 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:25 2009 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set CONFIG_PPC_85xx=y # CONFIG_PPC_8xx is not set # CONFIG_40x is not set @@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set @@ -57,11 +58,13 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -110,7 +113,6 @@ CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set -# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y @@ -123,9 +125,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -139,6 +148,10 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -146,7 +159,7 @@ CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -179,6 +192,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_DS is not set # CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set +# CONFIG_XES_MPC85xx is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set @@ -228,6 +242,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -246,9 +261,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -356,6 +371,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -373,7 +389,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -475,6 +495,7 @@ CONFIG_MTD_CFI_UTIL=y CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -509,7 +530,9 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y @@ -584,14 +607,17 @@ CONFIG_BLK_DEV_IDEDMA=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -654,6 +680,7 @@ CONFIG_E100=y # CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set +# CONFIG_KS8842 is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set @@ -676,8 +703,10 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -831,6 +860,7 @@ CONFIG_I2C_HELPER_AUTO=y # I2C system bus drivers (mostly embedded / system-on-chip) # # CONFIG_I2C_CPM is not set +# CONFIG_I2C_DESIGNWARE is not set # CONFIG_I2C_GPIO is not set CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set @@ -859,13 +889,17 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y @@ -944,6 +978,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -979,23 +1014,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1052,6 +1073,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1071,10 +1096,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1201,6 +1228,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1226,22 +1254,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set diff --git a/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig b/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig index 2552cbe..1025da2 100644 --- a/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig +++ b/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc6 -# Thu Jun 11 11:25:17 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:25 2009 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set CONFIG_PPC_85xx=y # CONFIG_PPC_8xx is not set # CONFIG_40x is not set @@ -35,15 +35,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set @@ -64,6 +65,7 @@ CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -114,7 +116,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -127,9 +128,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -144,6 +152,10 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_USE_GENERIC_SMP_HELPERS=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -157,7 +169,7 @@ CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y -CONFIG_LBD=y +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -239,6 +251,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -258,9 +271,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -287,6 +300,8 @@ CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y CONFIG_PCIEPORTBUS=y CONFIG_PCIEAER=y +# CONFIG_PCIE_ECRC is not set +# CONFIG_PCIEAER_INJECT is not set # CONFIG_PCIEASPM is not set CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y @@ -404,6 +419,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -540,6 +556,7 @@ CONFIG_MTD_NAND_FSL_UPM=y CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -575,7 +592,9 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -599,10 +618,6 @@ CONFIG_BLK_DEV_SR=y # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set CONFIG_SCSI_LOGGING=y @@ -619,6 +634,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -627,6 +643,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set @@ -646,7 +663,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -730,14 +746,17 @@ CONFIG_PATA_ALI=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=y # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -784,6 +803,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -803,8 +823,10 @@ CONFIG_E1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -986,13 +1008,17 @@ CONFIG_I2C_MPC=y # CONFIG_DS1682 is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y @@ -1072,6 +1098,7 @@ CONFIG_SENSORS_LM90=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1126,23 +1153,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1187,7 +1200,7 @@ CONFIG_USB_HID=y # CONFIG_HID_CHERRY is not set # CONFIG_HID_CHICONY is not set # CONFIG_HID_CYPRESS is not set -# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_DRAGONRISE is not set # CONFIG_HID_EZKEY is not set # CONFIG_HID_KYE is not set # CONFIG_HID_GYRATION is not set @@ -1201,10 +1214,11 @@ CONFIG_USB_HID=y # CONFIG_HID_SAMSUNG is not set # CONFIG_HID_SONY is not set # CONFIG_HID_SUNPLUS is not set -# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set # CONFIG_HID_TOPSEED is not set -# CONFIG_THRUSTMASTER_FF is not set -# CONFIG_ZEROPLUS_FF is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1230,6 +1244,7 @@ CONFIG_USB_MON=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set # CONFIG_USB_EHCI_HCD is not set # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set @@ -1325,7 +1340,7 @@ CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y CONFIG_LEDS_GPIO_PLATFORM=y CONFIG_LEDS_GPIO_OF=y -# CONFIG_LEDS_LP5521 is not set +# CONFIG_LEDS_LP3944 is not set CONFIG_LEDS_PCA955X=y # CONFIG_LEDS_BD2802 is not set @@ -1352,8 +1367,6 @@ CONFIG_EDAC=y # CONFIG_EDAC_DEBUG is not set CONFIG_EDAC_MM_EDAC=y CONFIG_EDAC_MPC85XX=y -# CONFIG_EDAC_AMD8131 is not set -# CONFIG_EDAC_AMD8111 is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1385,6 +1398,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1425,6 +1439,10 @@ CONFIG_NET_DMA=y # CONFIG_DMATEST is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1444,11 +1462,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1629,6 +1648,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1659,6 +1679,9 @@ CONFIG_SCHED_DEBUG=y # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -1671,7 +1694,6 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set @@ -1685,16 +1707,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -1702,6 +1723,9 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set diff --git a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig index d8354d9..527ad1a 100644 --- a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig +++ b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30 -# Thu Jul 2 13:55:24 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:31 2009 # # CONFIG_PPC64 is not set @@ -39,6 +39,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_LOCKBREAK=y @@ -1322,6 +1323,8 @@ CONFIG_USB_EHCI_HCD=y # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set +# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set # CONFIG_USB_OHCI_HCD_PPC_OF is not set # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set diff --git a/arch/powerpc/configs/86xx/gef_sbc310_defconfig b/arch/powerpc/configs/86xx/gef_sbc310_defconfig index f2362e5..cd338d4 100644 --- a/arch/powerpc/configs/86xx/gef_sbc310_defconfig +++ b/arch/powerpc/configs/86xx/gef_sbc310_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30 -# Thu Jul 2 14:10:12 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:29 2009 # # CONFIG_PPC64 is not set @@ -39,6 +39,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_LOCKBREAK=y @@ -1267,6 +1268,8 @@ CONFIG_USB_EHCI_HCD=y # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set +# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set # CONFIG_USB_OHCI_HCD_PPC_OF is not set # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig index c6a7fc8..ba47883 100644 --- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig +++ b/arch/powerpc/configs/86xx/gef_sbc610_defconfig @@ -1,26 +1,28 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:30 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:30 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_PHYS_64BIT is not set CONFIG_ALTIVEC=y CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y CONFIG_SMP=y CONFIG_NR_CPUS=2 CONFIG_PPC32=y @@ -32,16 +34,17 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_LOCKBREAK=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set @@ -56,11 +59,13 @@ CONFIG_PPC_UDBG_16550=y CONFIG_GENERIC_TBSYNC=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -114,7 +119,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -127,8 +131,15 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -143,6 +154,10 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_USE_GENERIC_SMP_HELPERS=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -156,7 +171,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -235,6 +250,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=m # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -256,9 +272,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -285,6 +301,8 @@ CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y CONFIG_PCIEPORTBUS=y CONFIG_PCIEAER=y +# CONFIG_PCIE_ECRC is not set +# CONFIG_PCIEAER_INJECT is not set # CONFIG_PCIEASPM is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set @@ -510,6 +528,7 @@ CONFIG_LLC=m # CONFIG_ECONET is not set CONFIG_WAN_ROUTER=m # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set CONFIG_NET_SCHED=y # @@ -566,7 +585,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -678,6 +701,7 @@ CONFIG_MTD_PHYSMAP_OF=y CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -713,7 +737,9 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -737,10 +763,6 @@ CONFIG_BLK_DEV_SR=y # CONFIG_BLK_DEV_SR_VENDOR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -757,6 +779,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -765,6 +788,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set @@ -784,7 +808,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -868,14 +891,17 @@ CONFIG_SATA_SIL=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_MACVLAN is not set @@ -922,6 +948,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -941,8 +968,10 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -1149,13 +1178,17 @@ CONFIG_DS1682=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y @@ -1235,6 +1268,7 @@ CONFIG_SENSORS_LM92=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1290,24 +1324,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1352,7 +1371,7 @@ CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y -# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_DRAGONRISE is not set CONFIG_HID_EZKEY=y # CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y @@ -1369,10 +1388,11 @@ CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y -# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set # CONFIG_HID_TOPSEED is not set -CONFIG_THRUSTMASTER_FF=m -CONFIG_ZEROPLUS_FF=m +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1398,6 +1418,7 @@ CONFIG_USB=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set @@ -1407,6 +1428,8 @@ CONFIG_USB_EHCI_HCD=y # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set +# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set # CONFIG_USB_OHCI_HCD_PPC_OF is not set # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set @@ -1527,6 +1550,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set CONFIG_RTC_DRV_RX8581=y +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1554,6 +1578,10 @@ CONFIG_RTC_DRV_RX8581=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1575,10 +1603,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1645,6 +1675,7 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set CONFIG_LOCKD=y @@ -1734,6 +1765,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1759,10 +1791,14 @@ CONFIG_SCHED_DEBUG=y # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -1774,7 +1810,6 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set @@ -1788,17 +1823,16 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -1806,6 +1840,9 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set @@ -1829,7 +1866,6 @@ CONFIG_SECURITY_NETWORK=y # CONFIG_SECURITY_PATH is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_SECURITY_ROOTPLUG is not set -CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 # CONFIG_SECURITY_TOMOYO is not set CONFIG_CRYPTO=y diff --git a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig index cfd2efc..a61f183 100644 --- a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig +++ b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig @@ -1,26 +1,28 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:28 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:27 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_PHYS_64BIT is not set CONFIG_ALTIVEC=y CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 @@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -53,11 +56,13 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -109,7 +114,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set CONFIG_KALLSYMS_EXTRA_PASS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -122,9 +126,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -138,6 +149,10 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -150,7 +165,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -230,6 +245,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -250,9 +266,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -279,6 +295,8 @@ CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y CONFIG_PCIEPORTBUS=y CONFIG_PCIEAER=y +# CONFIG_PCIE_ECRC is not set +# CONFIG_PCIEAER_INJECT is not set # CONFIG_PCIEASPM is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set @@ -381,6 +399,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -398,7 +417,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -549,7 +572,9 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y @@ -620,10 +645,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_BLK_DEV_SR is not set CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -640,6 +661,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -648,6 +670,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set @@ -667,7 +690,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -751,14 +773,17 @@ CONFIG_PATA_ALI=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=y # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -792,6 +817,7 @@ CONFIG_ULI526X=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -959,13 +985,17 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -993,23 +1023,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1106,6 +1122,11 @@ CONFIG_SND_PCM_OSS_PLUGINS=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_MTPAV is not set @@ -1130,6 +1151,7 @@ CONFIG_SND_PCI=y # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS5530 is not set +# CONFIG_SND_CTXFI is not set # CONFIG_SND_DARLA20 is not set # CONFIG_SND_GINA20 is not set # CONFIG_SND_LAYLA20 is not set @@ -1160,6 +1182,7 @@ CONFIG_SND_PCI=y # CONFIG_SND_INTEL8X0 is not set # CONFIG_SND_INTEL8X0M is not set # CONFIG_SND_KORG1212 is not set +# CONFIG_SND_LX6464ES is not set # CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_MIXART is not set # CONFIG_SND_NM256 is not set @@ -1251,6 +1274,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1278,6 +1302,10 @@ CONFIG_RTC_DRV_CMOS=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1297,12 +1325,15 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set @@ -1464,6 +1495,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1494,6 +1526,9 @@ CONFIG_SCHED_DEBUG=y # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -1506,7 +1541,6 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set @@ -1520,16 +1554,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -1537,6 +1570,9 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set diff --git a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig index 0bee3e3..7016ce7 100644 --- a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig +++ b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig @@ -1,26 +1,28 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:28 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:28 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_PHYS_64BIT is not set CONFIG_ALTIVEC=y CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y CONFIG_SMP=y CONFIG_NR_CPUS=2 CONFIG_PPC32=y @@ -32,15 +34,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -54,11 +57,13 @@ CONFIG_PPC_UDBG_16550=y CONFIG_GENERIC_TBSYNC=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -113,7 +118,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -126,9 +130,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -143,6 +154,10 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_USE_GENERIC_SMP_HELPERS=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -156,7 +171,7 @@ CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y -CONFIG_LBD=y +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -234,7 +249,9 @@ CONFIG_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=m -# CONFIG_IOMMU_HELPER is not set +CONFIG_IOMMU_HELPER=y +CONFIG_SWIOTLB=y +CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -256,9 +273,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -401,6 +418,7 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -419,7 +437,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -444,6 +466,7 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_MTD is not set CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -479,7 +502,9 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set CONFIG_EEPROM_LEGACY=y +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -503,10 +528,6 @@ CONFIG_BLK_DEV_SR=y # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set CONFIG_SCSI_LOGGING=y @@ -524,6 +545,7 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -532,6 +554,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set @@ -551,7 +574,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -635,14 +657,17 @@ CONFIG_PATA_ALI=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=y # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -689,6 +714,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -708,8 +734,10 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -909,13 +937,17 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -943,76 +975,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -CONFIG_DVB_CORE=m -CONFIG_VIDEO_MEDIA=m - -# -# Multimedia drivers -# -# CONFIG_MEDIA_ATTACH is not set -CONFIG_MEDIA_TUNER=m -# CONFIG_MEDIA_TUNER_CUSTOMISE is not set -CONFIG_MEDIA_TUNER_SIMPLE=m -CONFIG_MEDIA_TUNER_TDA8290=m -CONFIG_MEDIA_TUNER_TDA9887=m -CONFIG_MEDIA_TUNER_TEA5761=m -CONFIG_MEDIA_TUNER_TEA5767=m -CONFIG_MEDIA_TUNER_MT20XX=m -CONFIG_MEDIA_TUNER_XC2028=m -CONFIG_MEDIA_TUNER_XC5000=m -CONFIG_MEDIA_TUNER_MC44S803=m -# CONFIG_DVB_DYNAMIC_MINORS is not set -CONFIG_DVB_CAPTURE_DRIVERS=y - -# -# Supported SAA7146 based PCI Adapters -# -# CONFIG_TTPCI_EEPROM is not set -# CONFIG_DVB_BUDGET_CORE is not set - -# -# Supported USB Adapters -# -# CONFIG_DVB_USB is not set -# CONFIG_DVB_TTUSB_BUDGET is not set -# CONFIG_DVB_TTUSB_DEC is not set -# CONFIG_DVB_SIANO_SMS1XXX is not set - -# -# Supported FlexCopII (B2C2) Adapters -# -# CONFIG_DVB_B2C2_FLEXCOP is not set - -# -# Supported BT878 Adapters -# - -# -# Supported Pluto2 Adapters -# -# CONFIG_DVB_PLUTO2 is not set - -# -# Supported SDMC DM1105 Adapters -# -# CONFIG_DVB_DM1105 is not set - -# -# Supported DVB Frontends -# -# CONFIG_DVB_FE_CUSTOMISE is not set -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1052,6 +1017,11 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set CONFIG_SND_VMASTER=y +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set CONFIG_SND_AC97_CODEC=y CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set @@ -1078,6 +1048,7 @@ CONFIG_SND_PCI=y # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS5530 is not set +# CONFIG_SND_CTXFI is not set # CONFIG_SND_DARLA20 is not set # CONFIG_SND_GINA20 is not set # CONFIG_SND_LAYLA20 is not set @@ -1108,6 +1079,7 @@ CONFIG_SND_PCI=y CONFIG_SND_INTEL8X0=y # CONFIG_SND_INTEL8X0M is not set # CONFIG_SND_KORG1212 is not set +# CONFIG_SND_LX6464ES is not set # CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_MIXART is not set # CONFIG_SND_NM256 is not set @@ -1152,7 +1124,7 @@ CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y -# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_DRAGONRISE is not set CONFIG_HID_EZKEY=y # CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y @@ -1169,10 +1141,11 @@ CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y -# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set # CONFIG_HID_TOPSEED is not set -CONFIG_THRUSTMASTER_FF=m -CONFIG_ZEROPLUS_FF=m +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1198,6 +1171,7 @@ CONFIG_USB_MON=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set @@ -1207,9 +1181,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y CONFIG_USB_OHCI_HCD_PPC_OF_LE=y +CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PCI=y CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y @@ -1329,6 +1303,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1356,6 +1331,10 @@ CONFIG_RTC_DRV_CMOS=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1375,11 +1354,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1454,6 +1434,7 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y CONFIG_NFSD=y # CONFIG_NFSD_V3 is not set @@ -1555,6 +1536,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1585,6 +1567,9 @@ CONFIG_SCHED_DEBUG=y # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -1597,7 +1582,6 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set @@ -1611,16 +1595,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -1628,6 +1611,9 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set diff --git a/arch/powerpc/configs/86xx/sbc8641d_defconfig b/arch/powerpc/configs/86xx/sbc8641d_defconfig index c30a0c7..f5ca2e0 100644 --- a/arch/powerpc/configs/86xx/sbc8641d_defconfig +++ b/arch/powerpc/configs/86xx/sbc8641d_defconfig @@ -1,26 +1,28 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:27 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:26 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_PHYS_64BIT is not set CONFIG_ALTIVEC=y CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y CONFIG_SMP=y CONFIG_NR_CPUS=2 CONFIG_PPC32=y @@ -32,16 +34,17 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_LOCKBREAK=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -55,11 +58,13 @@ CONFIG_PPC_UDBG_16550=y CONFIG_GENERIC_TBSYNC=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -113,7 +118,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -126,8 +130,15 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -142,6 +153,11 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_USE_GENERIC_SMP_HELPERS=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -155,7 +171,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -234,6 +250,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=m # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -255,9 +272,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -284,6 +301,8 @@ CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y CONFIG_PCIEPORTBUS=y CONFIG_PCIEAER=y +# CONFIG_PCIE_ECRC is not set +# CONFIG_PCIEAER_INJECT is not set # CONFIG_PCIEASPM is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set @@ -508,6 +527,7 @@ CONFIG_LLC=m # CONFIG_ECONET is not set CONFIG_WAN_ROUTER=m # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set CONFIG_NET_SCHED=y # @@ -564,7 +584,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -675,6 +699,7 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -709,7 +734,9 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -736,6 +763,7 @@ CONFIG_BLK_DEV_DM=y CONFIG_DM_CRYPT=y CONFIG_DM_SNAPSHOT=y CONFIG_DM_MIRROR=y +# CONFIG_DM_LOG_USERSPACE is not set CONFIG_DM_ZERO=y # CONFIG_DM_MULTIPATH is not set # CONFIG_DM_DELAY is not set @@ -747,14 +775,17 @@ CONFIG_DM_ZERO=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_MACVLAN is not set @@ -801,6 +832,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -820,8 +852,10 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -1018,13 +1052,17 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -1079,6 +1117,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1127,23 +1166,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1207,6 +1232,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1236,8 +1265,8 @@ CONFIG_REISERFS_FS_POSIX_ACL=y # CONFIG_REISERFS_FS_SECURITY is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set CONFIG_OCFS2_FS=m CONFIG_OCFS2_FS_O2CB=m CONFIG_OCFS2_FS_STATS=y @@ -1245,6 +1274,8 @@ CONFIG_OCFS2_DEBUG_MASKLOG=y # CONFIG_OCFS2_DEBUG_FS is not set # CONFIG_OCFS2_FS_POSIX_ACL is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1318,6 +1349,7 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set CONFIG_LOCKD=y @@ -1409,6 +1441,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1434,10 +1467,14 @@ CONFIG_SCHED_DEBUG=y # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -1449,7 +1486,6 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set @@ -1463,17 +1499,16 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -1482,9 +1517,13 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_PPC_EMULATED_STATS is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1505,7 +1544,6 @@ CONFIG_SECURITY_NETWORK=y # CONFIG_SECURITY_NETWORK_XFRM is not set # CONFIG_SECURITY_PATH is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 # CONFIG_SECURITY_TOMOYO is not set CONFIG_CRYPTO=y diff --git a/arch/powerpc/configs/adder875_defconfig b/arch/powerpc/configs/adder875_defconfig index 74f7f7c..aece6bb 100644 --- a/arch/powerpc/configs/adder875_defconfig +++ b/arch/powerpc/configs/adder875_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:21:50 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:31:47 2009 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set # CONFIG_PPC_85xx is not set CONFIG_PPC_8xx=y # CONFIG_40x is not set @@ -27,15 +27,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -49,12 +50,14 @@ CONFIG_OF=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set CONFIG_REDBOOT=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -101,7 +104,6 @@ CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -114,8 +116,15 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -129,13 +138,18 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_BASE_SMALL=1 # CONFIG_MODULES is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -220,6 +234,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_MATH_EMULATION is not set # CONFIG_8XX_MINIMAL_FPEMU is not set # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y @@ -239,9 +254,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -280,6 +295,7 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0x80000000 +CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # @@ -336,6 +352,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -353,7 +370,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -452,6 +473,7 @@ CONFIG_MTD_PHYSMAP_OF=y # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set # CONFIG_BLK_DEV is not set # CONFIG_MISC_DEVICES is not set @@ -469,7 +491,6 @@ CONFIG_HAVE_IDE=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -508,6 +529,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set CONFIG_FS_ENET_HAS_FEC=y @@ -556,11 +578,11 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y @@ -622,6 +644,11 @@ CONFIG_GEN_RTC=y # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -644,22 +671,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -685,6 +697,10 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -696,12 +712,15 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set @@ -818,6 +837,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -846,6 +866,9 @@ CONFIG_SCHED_DEBUG=y # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -857,7 +880,6 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set @@ -870,16 +892,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -888,9 +909,13 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_PPC_EMULATED_STATS is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set diff --git a/arch/powerpc/configs/c2k_defconfig b/arch/powerpc/configs/c2k_defconfig index 9ffa8de..8105360 100644 --- a/arch/powerpc/configs/c2k_defconfig +++ b/arch/powerpc/configs/c2k_defconfig @@ -1,25 +1,27 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:21:51 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:31:48 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_SMP is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_CHECK_CACHE_COHERENCY=y @@ -32,15 +34,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -54,11 +57,13 @@ CONFIG_OF=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -118,7 +123,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set CONFIG_KALLSYMS_EXTRA_PASS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -131,16 +135,23 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y CONFIG_TRACEPOINTS=y -# CONFIG_MARKERS is not set +CONFIG_MARKERS=y CONFIG_OPROFILE=m CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y @@ -150,6 +161,11 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -162,7 +178,7 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -CONFIG_LBD=y +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -258,6 +274,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y @@ -279,9 +296,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -331,6 +348,7 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 +CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # @@ -583,6 +601,7 @@ CONFIG_LLC=m # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set CONFIG_NET_SCHED=y # @@ -663,7 +682,11 @@ CONFIG_WIRELESS_OLD_REGULATORY=y CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -772,6 +795,7 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y CONFIG_OF_I2C=m +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -816,10 +840,6 @@ CONFIG_BLK_DEV_SR=m CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y @@ -836,6 +856,7 @@ CONFIG_SCSI_ISCSI_ATTRS=m CONFIG_SCSI_SRP_ATTRS=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_BNX2_ISCSI is not set CONFIG_BLK_DEV_3W_XXXX_RAID=m CONFIG_SCSI_3W_9XXX=m CONFIG_SCSI_ACARD=m @@ -854,6 +875,7 @@ CONFIG_AIC79XX_RESET_DELAY_MS=15000 CONFIG_AIC79XX_DEBUG_MASK=0 # CONFIG_AIC79XX_REG_PRETTY_PRINT is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set CONFIG_SCSI_ARCMSR=m @@ -875,7 +897,6 @@ CONFIG_SCSI_GDTH=m CONFIG_SCSI_IPS=m CONFIG_SCSI_INITIO=m # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set CONFIG_SCSI_SYM53C8XX_2=m CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 @@ -903,14 +924,17 @@ CONFIG_SCSI_LPFC=m # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_MACVLAN is not set @@ -957,6 +981,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -976,6 +1001,7 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_MV643XX_ETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set @@ -1177,13 +1203,17 @@ CONFIG_I2C_MV64XXX=m CONFIG_SENSORS_PCF8574=m # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -1238,6 +1268,7 @@ CONFIG_SENSORS_SMSC47M1=m CONFIG_SENSORS_SMSC47B397=m # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set CONFIG_SENSORS_VIA686A=m # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1266,7 +1297,6 @@ CONFIG_SOFT_WATCHDOG=m # CONFIG_PCIPCWATCHDOG=m CONFIG_WDTPCI=m -CONFIG_WDT_501_PCI=y # # USB-based Watchdog Cards @@ -1289,23 +1319,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1354,6 +1370,7 @@ CONFIG_USB_MON=m # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=m CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set @@ -1362,9 +1379,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=m -CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set +CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PCI=y CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y @@ -1545,6 +1562,10 @@ CONFIG_DMADEVICES=y # # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1563,11 +1584,12 @@ CONFIG_FS_MBCACHE=m # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1652,6 +1674,7 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set CONFIG_LOCKD=y @@ -1764,6 +1787,7 @@ CONFIG_HAS_DMA=y CONFIG_CHECK_SIGNATURE=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1794,6 +1818,9 @@ CONFIG_SCHED_DEBUG=y # CONFIG_RT_MUTEX_TESTER is not set CONFIG_DEBUG_SPINLOCK=y # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set CONFIG_DEBUG_SPINLOCK_SLEEP=y # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set CONFIG_STACKTRACE=y @@ -1807,7 +1834,6 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_KPROBES_SANITY_TEST is not set @@ -1824,30 +1850,34 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_RING_BUFFER=y +CONFIG_EVENT_TRACING=y +CONFIG_CONTEXT_SWITCH_TRACER=y CONFIG_TRACING=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_RING_BUFFER_BENCHMARK is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACK_USAGE=y +# CONFIG_PPC_EMULATED_STATS is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1869,7 +1899,6 @@ CONFIG_SECURITY_NETWORK=y # CONFIG_SECURITY_NETWORK_XFRM is not set # CONFIG_SECURITY_PATH is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 CONFIG_SECURITY_SELINUX=y CONFIG_SECURITY_SELINUX_BOOTPARAM=y CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1 diff --git a/arch/powerpc/configs/ep8248e_defconfig b/arch/powerpc/configs/ep8248e_defconfig index 04915c3..0aa5b43 100644 --- a/arch/powerpc/configs/ep8248e_defconfig +++ b/arch/powerpc/configs/ep8248e_defconfig @@ -1,25 +1,27 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:21:52 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:31:49 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 @@ -30,15 +32,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set @@ -53,11 +56,13 @@ CONFIG_OF=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -99,7 +104,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -112,8 +116,15 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -127,6 +138,10 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -134,7 +149,7 @@ CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_INTEGRITY is not set # @@ -213,6 +228,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -228,9 +244,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -300,6 +316,7 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set CONFIG_SYN_COOKIES=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set @@ -380,7 +397,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set @@ -485,6 +506,7 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -520,13 +542,17 @@ CONFIG_HAVE_IDE=y # # -# A new alternative FireWire stack is available with EXPERIMENTAL=y +# You can enable one or both FireWire driver stacks. # + +# +# See the help texts for more information. +# +# CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set @@ -573,6 +599,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set @@ -594,8 +621,10 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set # CONFIG_FSL_PQ_MDIO is not set # CONFIG_GIANFAR is not set +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_JME is not set @@ -685,6 +714,10 @@ CONFIG_HW_RANDOM=y CONFIG_DEVPORT=y # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y @@ -728,22 +761,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -771,6 +789,10 @@ CONFIG_DAB=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -787,9 +809,10 @@ CONFIG_JBD=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -935,6 +958,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -960,6 +984,9 @@ CONFIG_DEBUG_KERNEL=y # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -971,7 +998,6 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set @@ -985,22 +1011,23 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set diff --git a/arch/powerpc/configs/ep88xc_defconfig b/arch/powerpc/configs/ep88xc_defconfig index c2a4395..2c292e2 100644 --- a/arch/powerpc/configs/ep88xc_defconfig +++ b/arch/powerpc/configs/ep88xc_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:21:53 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:31:49 2009 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set # CONFIG_PPC_85xx is not set CONFIG_PPC_8xx=y # CONFIG_40x is not set @@ -27,15 +27,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -49,11 +50,13 @@ CONFIG_OF=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -100,7 +103,6 @@ CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -113,8 +115,15 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -128,13 +137,17 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_BASE_SMALL=1 # CONFIG_MODULES is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -220,6 +233,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_MATH_EMULATION is not set CONFIG_8XX_MINIMAL_FPEMU=y # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y @@ -239,9 +253,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -280,6 +294,7 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0x80000000 +CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # @@ -336,6 +351,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -353,7 +369,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -452,6 +472,7 @@ CONFIG_MTD_PHYSMAP_OF=y # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set # CONFIG_BLK_DEV is not set # CONFIG_MISC_DEVICES is not set @@ -469,7 +490,6 @@ CONFIG_HAVE_IDE=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -508,6 +528,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set CONFIG_FS_ENET_HAS_FEC=y @@ -579,6 +600,11 @@ CONFIG_GEN_RTC=y # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -602,22 +628,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -642,6 +653,10 @@ CONFIG_DAB=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -653,12 +668,15 @@ CONFIG_DAB=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set @@ -775,6 +793,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -803,6 +822,9 @@ CONFIG_SCHED_DEBUG=y # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -814,7 +836,6 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set @@ -827,16 +848,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -844,6 +864,9 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig index a4053ab..45671e7 100644 --- a/arch/powerpc/configs/linkstation_defconfig +++ b/arch/powerpc/configs/linkstation_defconfig @@ -1,25 +1,27 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:21:54 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:31:50 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 @@ -30,15 +32,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -52,11 +55,13 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -114,7 +119,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -127,9 +131,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_COMPAT_BRK is not set # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -143,6 +154,10 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -155,7 +170,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -237,6 +252,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -257,9 +273,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -480,6 +496,7 @@ CONFIG_IP_NF_ARP_MANGLE=m # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -498,7 +515,11 @@ CONFIG_WIRELESS_OLD_REGULATORY=y CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -647,7 +668,9 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set CONFIG_EEPROM_LEGACY=m +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -670,10 +693,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_BLK_DEV_SR is not set CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -691,6 +710,7 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -699,6 +719,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set @@ -718,7 +739,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -802,14 +822,17 @@ CONFIG_PATA_SIL680=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -846,6 +869,7 @@ CONFIG_TULIP_MMIO=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -865,8 +889,10 @@ CONFIG_R8169=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set # CONFIG_FSL_PQ_MDIO is not set # CONFIG_GIANFAR is not set +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -1074,13 +1100,17 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -1135,6 +1165,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1169,23 +1200,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1245,6 +1262,7 @@ CONFIG_USB_MON=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set @@ -1254,9 +1272,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set +CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PCI=y CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y @@ -1423,6 +1441,7 @@ CONFIG_RTC_DRV_RS5C372=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1450,6 +1469,10 @@ CONFIG_RTC_DRV_RS5C372=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1469,14 +1492,16 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y -CONFIG_FILE_LOCKING=y CONFIG_XFS_FS=m # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set # CONFIG_XFS_DEBUG is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1548,6 +1573,7 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y @@ -1578,7 +1604,7 @@ CONFIG_CIFS=m # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y -CONFIG_NLS=m +CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=m # CONFIG_NLS_CODEPAGE_737 is not set @@ -1645,6 +1671,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1675,6 +1702,9 @@ CONFIG_SCHED_DEBUG=y # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -1686,7 +1716,6 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set @@ -1700,16 +1729,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -1717,6 +1745,8 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set diff --git a/arch/powerpc/configs/mgcoge_defconfig b/arch/powerpc/configs/mgcoge_defconfig index 31e1df6..e9491c1 100644 --- a/arch/powerpc/configs/mgcoge_defconfig +++ b/arch/powerpc/configs/mgcoge_defconfig @@ -1,25 +1,27 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:21:55 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:31:51 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 @@ -30,15 +32,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set @@ -53,6 +56,7 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set CONFIG_HIBERNATE_32=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y @@ -60,6 +64,7 @@ CONFIG_ARCH_HIBERNATION_POSSIBLE=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -105,7 +110,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -119,8 +123,15 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -134,6 +145,11 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -141,7 +157,7 @@ CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_INTEGRITY is not set # @@ -225,6 +241,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -240,9 +257,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -313,6 +330,7 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set CONFIG_SYN_COOKIES=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set @@ -374,7 +392,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set @@ -484,6 +506,7 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -523,13 +546,17 @@ CONFIG_HAVE_IDE=y # # -# A new alternative FireWire stack is available with EXPERIMENTAL=y +# You can enable one or both FireWire driver stacks. # + +# +# See the help texts for more information. +# +# CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set @@ -577,6 +604,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set CONFIG_FS_ENET=y CONFIG_FS_ENET_HAS_SCC=y @@ -654,6 +682,10 @@ CONFIG_HW_RANDOM=y CONFIG_DEVPORT=y # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y @@ -697,22 +729,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -740,6 +757,10 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -757,9 +778,10 @@ CONFIG_JBD=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -916,6 +938,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -941,6 +964,9 @@ CONFIG_DEBUG_KERNEL=y # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -952,7 +978,6 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set @@ -966,16 +991,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -983,9 +1007,12 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_PPC_EMULATED_STATS is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set diff --git a/arch/powerpc/configs/mgsuvd_defconfig b/arch/powerpc/configs/mgsuvd_defconfig index 24fa9079..1ae85a3 100644 --- a/arch/powerpc/configs/mgsuvd_defconfig +++ b/arch/powerpc/configs/mgsuvd_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:21:55 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:31:52 2009 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set # CONFIG_PPC_85xx is not set CONFIG_PPC_8xx=y # CONFIG_40x is not set @@ -27,15 +27,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -48,11 +49,13 @@ CONFIG_OF=y # CONFIG_PPC_UDBG_16550 is not set # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -102,7 +105,6 @@ CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y # CONFIG_BUG is not set @@ -115,7 +117,14 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set # CONFIG_VM_EVENT_COUNTERS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -129,6 +138,11 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -136,7 +150,7 @@ CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=1 # CONFIG_MODULES is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -222,6 +236,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y @@ -241,9 +256,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -281,6 +296,7 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0x80000000 +CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # @@ -342,6 +358,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -359,7 +376,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -463,6 +484,7 @@ CONFIG_MTD_PHYSMAP_OF=y # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -492,7 +514,6 @@ CONFIG_HAVE_IDE=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -531,6 +552,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set CONFIG_FS_ENET=y CONFIG_FS_ENET_HAS_SCC=y # CONFIG_FS_ENET_HAS_FEC is not set @@ -602,6 +624,11 @@ CONFIG_GEN_RTC=y # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -625,22 +652,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -665,6 +677,10 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -687,10 +703,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -823,6 +841,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -844,24 +863,14 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 +# CONFIG_PPC_EMULATED_STATS is not set # CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set # CONFIG_PPC_EARLY_DEBUG is not set diff --git a/arch/powerpc/configs/mpc7448_hpc2_defconfig b/arch/powerpc/configs/mpc7448_hpc2_defconfig index 642ab67..f23428c 100644 --- a/arch/powerpc/configs/mpc7448_hpc2_defconfig +++ b/arch/powerpc/configs/mpc7448_hpc2_defconfig @@ -1,25 +1,27 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:21:56 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:31:53 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y CONFIG_ALTIVEC=y CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 @@ -30,15 +32,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -52,11 +55,13 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -106,7 +111,6 @@ CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -119,9 +123,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -134,6 +145,10 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -141,7 +156,7 @@ CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y -CONFIG_LBD=y +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -220,6 +235,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -240,9 +256,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -348,6 +364,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -365,7 +382,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -385,6 +406,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_OF_DEVICE=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -416,6 +438,7 @@ CONFIG_MISC_DEVICES=y # EEPROM support # # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -438,10 +461,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -458,6 +477,7 @@ CONFIG_BLK_DEV_SD=y CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -466,6 +486,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set @@ -485,7 +506,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -568,14 +588,17 @@ CONFIG_SATA_MV=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -642,6 +665,7 @@ CONFIG_8139TOO=y # CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set +# CONFIG_KS8842 is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set @@ -663,7 +687,9 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_TSI108_ETH=y +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -785,6 +811,11 @@ CONFIG_GEN_RTC=y CONFIG_DEVPORT=y # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -824,22 +855,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -896,6 +912,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -915,11 +935,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1038,6 +1059,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1063,22 +1085,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set diff --git a/arch/powerpc/configs/mpc8272_ads_defconfig b/arch/powerpc/configs/mpc8272_ads_defconfig index cb966ca..02716f7 100644 --- a/arch/powerpc/configs/mpc8272_ads_defconfig +++ b/arch/powerpc/configs/mpc8272_ads_defconfig @@ -1,25 +1,27 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:21:57 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:31:54 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 @@ -30,15 +32,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set @@ -53,11 +56,13 @@ CONFIG_OF=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -99,7 +104,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -112,9 +116,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -128,6 +139,10 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -135,7 +150,7 @@ CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_INTEGRITY is not set # @@ -216,6 +231,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -231,9 +247,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -303,6 +319,7 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set CONFIG_SYN_COOKIES=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set @@ -383,7 +400,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set @@ -489,6 +510,7 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -524,13 +546,17 @@ CONFIG_HAVE_IDE=y # # -# A new alternative FireWire stack is available with EXPERIMENTAL=y +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # +# CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set @@ -577,6 +603,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set @@ -598,8 +625,10 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set # CONFIG_FSL_PQ_MDIO is not set # CONFIG_GIANFAR is not set +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_JME is not set @@ -671,12 +700,13 @@ CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_MATRIX is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set -# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y @@ -741,6 +771,10 @@ CONFIG_HW_RANDOM=y CONFIG_DEVPORT=y # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y @@ -784,22 +818,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -828,6 +847,10 @@ CONFIG_DAB=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -847,9 +870,10 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -998,6 +1022,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1028,6 +1053,9 @@ CONFIG_SCHED_DEBUG=y # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -1039,7 +1067,6 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set @@ -1053,22 +1080,23 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig index 433c303..4a96cb6 100644 --- a/arch/powerpc/configs/mpc83xx_defconfig +++ b/arch/powerpc/configs/mpc83xx_defconfig @@ -1,26 +1,28 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:21:58 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:31:55 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 @@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set @@ -54,6 +57,7 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y CONFIG_REDBOOT=y CONFIG_ARCH_SUSPEND_POSSIBLE=y @@ -61,6 +65,7 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -110,7 +115,6 @@ CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -123,8 +127,15 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -138,6 +149,10 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -150,7 +165,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -192,6 +207,7 @@ CONFIG_MPC837x_MDS=y CONFIG_MPC837x_RDB=y CONFIG_SBC834x=y CONFIG_ASP834x=y +# CONFIG_KMETER1 is not set CONFIG_PPC_MPC831x=y CONFIG_PPC_MPC832x=y CONFIG_PPC_MPC834x=y @@ -241,6 +257,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -261,9 +278,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -374,6 +391,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -391,7 +409,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -507,6 +529,7 @@ CONFIG_MTD_NAND_FSL_ELBC=y CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -542,7 +565,9 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -565,10 +590,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_BLK_DEV_SR is not set CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -586,6 +607,7 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -594,6 +616,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set @@ -613,7 +636,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -697,14 +719,17 @@ CONFIG_ATA_SFF=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -751,6 +776,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -770,11 +796,13 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y CONFIG_UCC_GETH=y # CONFIG_UGETH_MAGIC_PACKET is not set # CONFIG_UGETH_TX_ON_DEMAND is not set +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -965,13 +993,17 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y @@ -1050,6 +1082,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1104,24 +1137,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1159,7 +1177,7 @@ CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y -# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_DRAGONRISE is not set CONFIG_HID_EZKEY=y # CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y @@ -1176,10 +1194,11 @@ CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y -# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set # CONFIG_HID_TOPSEED is not set -CONFIG_THRUSTMASTER_FF=m -CONFIG_ZEROPLUS_FF=m +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1205,6 +1224,7 @@ CONFIG_USB_MON=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set @@ -1291,6 +1311,10 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1310,10 +1334,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1377,6 +1403,7 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set CONFIG_LOCKD=y @@ -1413,7 +1440,46 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # CONFIG_SYSV68_PARTITION is not set -# CONFIG_NLS is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set CONFIG_UCC_FAST=y CONFIG_UCC=y @@ -1438,6 +1504,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1461,22 +1528,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index c162724..ada5958 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc2 -# Tue Apr 21 15:40:23 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:31:55 2009 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set CONFIG_PPC_85xx=y # CONFIG_PPC_8xx is not set # CONFIG_40x is not set @@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set @@ -57,11 +58,13 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -116,7 +119,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -129,9 +131,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -146,6 +155,11 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -158,7 +172,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -CONFIG_LBD=y +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -191,6 +205,7 @@ CONFIG_MPC8536_DS=y CONFIG_MPC85xx_DS=y CONFIG_SOCRATES=y CONFIG_KSI8560=y +# CONFIG_XES_MPC85xx is not set CONFIG_STX_GP3=y CONFIG_TQM8540=y CONFIG_TQM8541=y @@ -241,7 +256,9 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=m CONFIG_MATH_EMULATION=y -# CONFIG_IOMMU_HELPER is not set +CONFIG_IOMMU_HELPER=y +CONFIG_SWIOTLB=y +CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -260,9 +277,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -296,7 +313,8 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set -# CONFIG_HAS_RAPIDIO is not set +CONFIG_HAS_RAPIDIO=y +# CONFIG_RAPIDIO is not set # # Advanced setup @@ -406,6 +424,7 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -424,7 +443,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -450,6 +473,7 @@ CONFIG_EXTRA_FIRMWARE="" CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -485,7 +509,9 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set CONFIG_EEPROM_LEGACY=y +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -509,10 +535,6 @@ CONFIG_BLK_DEV_SR=y # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set CONFIG_SCSI_LOGGING=y @@ -530,6 +552,7 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -538,6 +561,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set @@ -557,7 +581,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -641,14 +664,17 @@ CONFIG_PATA_ALI=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=y # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -695,6 +721,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set CONFIG_FS_ENET=y CONFIG_FS_ENET_HAS_SCC=y @@ -718,11 +745,13 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y CONFIG_UCC_GETH=y # CONFIG_UGETH_MAGIC_PACKET is not set # CONFIG_UGETH_TX_ON_DEMAND is not set +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -897,6 +926,7 @@ CONFIG_I2C_HELPER_AUTO=y # I2C system bus drivers (mostly embedded / system-on-chip) # CONFIG_I2C_CPM=m +# CONFIG_I2C_DESIGNWARE is not set # CONFIG_I2C_GPIO is not set CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set @@ -927,13 +957,17 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y @@ -987,76 +1021,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -CONFIG_DVB_CORE=m -CONFIG_VIDEO_MEDIA=m - -# -# Multimedia drivers -# -# CONFIG_MEDIA_ATTACH is not set -CONFIG_MEDIA_TUNER=m -# CONFIG_MEDIA_TUNER_CUSTOMISE is not set -CONFIG_MEDIA_TUNER_SIMPLE=m -CONFIG_MEDIA_TUNER_TDA8290=m -CONFIG_MEDIA_TUNER_TDA9887=m -CONFIG_MEDIA_TUNER_TEA5761=m -CONFIG_MEDIA_TUNER_TEA5767=m -CONFIG_MEDIA_TUNER_MT20XX=m -CONFIG_MEDIA_TUNER_XC2028=m -CONFIG_MEDIA_TUNER_XC5000=m -CONFIG_MEDIA_TUNER_MC44S803=m -# CONFIG_DVB_DYNAMIC_MINORS is not set -CONFIG_DVB_CAPTURE_DRIVERS=y - -# -# Supported SAA7146 based PCI Adapters -# -# CONFIG_TTPCI_EEPROM is not set -# CONFIG_DVB_BUDGET_CORE is not set - -# -# Supported USB Adapters -# -# CONFIG_DVB_USB is not set -# CONFIG_DVB_TTUSB_BUDGET is not set -# CONFIG_DVB_TTUSB_DEC is not set -# CONFIG_DVB_SIANO_SMS1XXX is not set - -# -# Supported FlexCopII (B2C2) Adapters -# -# CONFIG_DVB_B2C2_FLEXCOP is not set - -# -# Supported BT878 Adapters -# - -# -# Supported Pluto2 Adapters -# -# CONFIG_DVB_PLUTO2 is not set - -# -# Supported SDMC DM1105 Adapters -# -# CONFIG_DVB_DM1105 is not set - -# -# Supported DVB Frontends -# -# CONFIG_DVB_FE_CUSTOMISE is not set -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1096,6 +1063,11 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set CONFIG_SND_VMASTER=y +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set CONFIG_SND_AC97_CODEC=y CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set @@ -1122,6 +1094,7 @@ CONFIG_SND_PCI=y # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS5530 is not set +# CONFIG_SND_CTXFI is not set # CONFIG_SND_DARLA20 is not set # CONFIG_SND_GINA20 is not set # CONFIG_SND_LAYLA20 is not set @@ -1152,6 +1125,7 @@ CONFIG_SND_PCI=y CONFIG_SND_INTEL8X0=y # CONFIG_SND_INTEL8X0M is not set # CONFIG_SND_KORG1212 is not set +# CONFIG_SND_LX6464ES is not set # CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_MIXART is not set # CONFIG_SND_NM256 is not set @@ -1196,7 +1170,7 @@ CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y -# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_DRAGONRISE is not set CONFIG_HID_EZKEY=y # CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y @@ -1213,10 +1187,11 @@ CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y -# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set # CONFIG_HID_TOPSEED is not set -CONFIG_THRUSTMASTER_FF=m -CONFIG_ZEROPLUS_FF=m +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1242,6 +1217,7 @@ CONFIG_USB_MON=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set @@ -1251,9 +1227,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y CONFIG_USB_OHCI_HCD_PPC_OF_LE=y +CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PCI=y CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y @@ -1352,8 +1328,6 @@ CONFIG_EDAC=y # CONFIG_EDAC_DEBUG is not set CONFIG_EDAC_MM_EDAC=y CONFIG_EDAC_MPC85XX=y -# CONFIG_EDAC_AMD8131 is not set -# CONFIG_EDAC_AMD8111 is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1385,6 +1359,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1425,6 +1400,10 @@ CONFIG_DMA_ENGINE=y # CONFIG_DMATEST is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1445,11 +1424,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1524,6 +1504,7 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y CONFIG_NFSD=y # CONFIG_NFSD_V3 is not set @@ -1628,6 +1609,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1658,6 +1640,9 @@ CONFIG_SCHED_DEBUG=y # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -1670,7 +1655,6 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set @@ -1684,16 +1668,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -1702,9 +1685,13 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_PPC_EMULATED_STATS is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig index 1aa1c50..db082ce 100644 --- a/arch/powerpc/configs/mpc85xx_smp_defconfig +++ b/arch/powerpc/configs/mpc85xx_smp_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc2 -# Tue Apr 21 15:41:18 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:31:56 2009 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set CONFIG_PPC_85xx=y # CONFIG_PPC_8xx is not set # CONFIG_40x is not set @@ -35,15 +35,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set @@ -58,11 +59,13 @@ CONFIG_PPC_UDBG_16550=y CONFIG_GENERIC_TBSYNC=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -117,7 +120,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -130,9 +132,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -148,6 +157,11 @@ CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -161,7 +175,7 @@ CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y -CONFIG_LBD=y +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -194,6 +208,7 @@ CONFIG_MPC8536_DS=y CONFIG_MPC85xx_DS=y CONFIG_SOCRATES=y CONFIG_KSI8560=y +# CONFIG_XES_MPC85xx is not set CONFIG_STX_GP3=y CONFIG_TQM8540=y CONFIG_TQM8541=y @@ -244,7 +259,9 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=m CONFIG_MATH_EMULATION=y -# CONFIG_IOMMU_HELPER is not set +CONFIG_IOMMU_HELPER=y +CONFIG_SWIOTLB=y +CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -264,9 +281,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -300,7 +317,8 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set -# CONFIG_HAS_RAPIDIO is not set +CONFIG_HAS_RAPIDIO=y +# CONFIG_RAPIDIO is not set # # Advanced setup @@ -410,6 +428,7 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -428,7 +447,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -454,6 +477,7 @@ CONFIG_EXTRA_FIRMWARE="" CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -489,7 +513,9 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set CONFIG_EEPROM_LEGACY=y +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -513,10 +539,6 @@ CONFIG_BLK_DEV_SR=y # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set CONFIG_SCSI_LOGGING=y @@ -534,6 +556,7 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -542,6 +565,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set @@ -561,7 +585,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -645,14 +668,17 @@ CONFIG_PATA_ALI=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=y # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -699,6 +725,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set CONFIG_FS_ENET=y CONFIG_FS_ENET_HAS_SCC=y @@ -722,11 +749,13 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y CONFIG_UCC_GETH=y # CONFIG_UGETH_MAGIC_PACKET is not set # CONFIG_UGETH_TX_ON_DEMAND is not set +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -901,6 +930,7 @@ CONFIG_I2C_HELPER_AUTO=y # I2C system bus drivers (mostly embedded / system-on-chip) # CONFIG_I2C_CPM=m +# CONFIG_I2C_DESIGNWARE is not set # CONFIG_I2C_GPIO is not set CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set @@ -931,13 +961,17 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y @@ -991,76 +1025,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -CONFIG_DVB_CORE=m -CONFIG_VIDEO_MEDIA=m - -# -# Multimedia drivers -# -# CONFIG_MEDIA_ATTACH is not set -CONFIG_MEDIA_TUNER=m -# CONFIG_MEDIA_TUNER_CUSTOMISE is not set -CONFIG_MEDIA_TUNER_SIMPLE=m -CONFIG_MEDIA_TUNER_TDA8290=m -CONFIG_MEDIA_TUNER_TDA9887=m -CONFIG_MEDIA_TUNER_TEA5761=m -CONFIG_MEDIA_TUNER_TEA5767=m -CONFIG_MEDIA_TUNER_MT20XX=m -CONFIG_MEDIA_TUNER_XC2028=m -CONFIG_MEDIA_TUNER_XC5000=m -CONFIG_MEDIA_TUNER_MC44S803=m -# CONFIG_DVB_DYNAMIC_MINORS is not set -CONFIG_DVB_CAPTURE_DRIVERS=y - -# -# Supported SAA7146 based PCI Adapters -# -# CONFIG_TTPCI_EEPROM is not set -# CONFIG_DVB_BUDGET_CORE is not set - -# -# Supported USB Adapters -# -# CONFIG_DVB_USB is not set -# CONFIG_DVB_TTUSB_BUDGET is not set -# CONFIG_DVB_TTUSB_DEC is not set -# CONFIG_DVB_SIANO_SMS1XXX is not set - -# -# Supported FlexCopII (B2C2) Adapters -# -# CONFIG_DVB_B2C2_FLEXCOP is not set - -# -# Supported BT878 Adapters -# - -# -# Supported Pluto2 Adapters -# -# CONFIG_DVB_PLUTO2 is not set - -# -# Supported SDMC DM1105 Adapters -# -# CONFIG_DVB_DM1105 is not set - -# -# Supported DVB Frontends -# -# CONFIG_DVB_FE_CUSTOMISE is not set -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1100,6 +1067,11 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set CONFIG_SND_VMASTER=y +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set CONFIG_SND_AC97_CODEC=y CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set @@ -1126,6 +1098,7 @@ CONFIG_SND_PCI=y # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS5530 is not set +# CONFIG_SND_CTXFI is not set # CONFIG_SND_DARLA20 is not set # CONFIG_SND_GINA20 is not set # CONFIG_SND_LAYLA20 is not set @@ -1156,6 +1129,7 @@ CONFIG_SND_PCI=y CONFIG_SND_INTEL8X0=y # CONFIG_SND_INTEL8X0M is not set # CONFIG_SND_KORG1212 is not set +# CONFIG_SND_LX6464ES is not set # CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_MIXART is not set # CONFIG_SND_NM256 is not set @@ -1200,7 +1174,7 @@ CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y -# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_DRAGONRISE is not set CONFIG_HID_EZKEY=y # CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y @@ -1217,10 +1191,11 @@ CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y -# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set # CONFIG_HID_TOPSEED is not set -CONFIG_THRUSTMASTER_FF=m -CONFIG_ZEROPLUS_FF=m +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1246,6 +1221,7 @@ CONFIG_USB_MON=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set @@ -1255,9 +1231,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y CONFIG_USB_OHCI_HCD_PPC_OF_LE=y +CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PCI=y CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y @@ -1356,8 +1332,6 @@ CONFIG_EDAC=y # CONFIG_EDAC_DEBUG is not set CONFIG_EDAC_MM_EDAC=y CONFIG_EDAC_MPC85XX=y -# CONFIG_EDAC_AMD8131 is not set -# CONFIG_EDAC_AMD8111 is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1389,6 +1363,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1429,6 +1404,10 @@ CONFIG_DMA_ENGINE=y # CONFIG_DMATEST is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1449,11 +1428,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1528,6 +1508,7 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y CONFIG_NFSD=y # CONFIG_NFSD_V3 is not set @@ -1632,6 +1613,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1662,6 +1644,9 @@ CONFIG_SCHED_DEBUG=y # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -1674,7 +1659,6 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set @@ -1688,16 +1672,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -1706,9 +1689,13 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_PPC_EMULATED_STATS is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set diff --git a/arch/powerpc/configs/mpc866_ads_defconfig b/arch/powerpc/configs/mpc866_ads_defconfig index 3add6f6..6809b61 100644 --- a/arch/powerpc/configs/mpc866_ads_defconfig +++ b/arch/powerpc/configs/mpc866_ads_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:00 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:31:57 2009 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set # CONFIG_PPC_85xx is not set CONFIG_PPC_8xx=y # CONFIG_40x is not set @@ -27,15 +27,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -48,11 +49,13 @@ CONFIG_OF=y # CONFIG_PPC_UDBG_16550 is not set # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -98,7 +101,6 @@ CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y # CONFIG_BUG is not set @@ -111,8 +113,15 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -126,6 +135,10 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -133,7 +146,7 @@ CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=1 # CONFIG_MODULES is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -219,6 +232,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y @@ -238,9 +252,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -278,6 +292,7 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0x80000000 +CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # @@ -339,6 +354,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -356,7 +372,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -374,6 +394,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_OF_DEVICE=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -407,7 +428,6 @@ CONFIG_HAVE_IDE=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -446,6 +466,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set CONFIG_FS_ENET=y CONFIG_FS_ENET_HAS_SCC=y CONFIG_FS_ENET_HAS_FEC=y @@ -453,6 +474,7 @@ CONFIG_FS_ENET_MDIO_FEC=y CONFIG_NETDEV_1000=y # CONFIG_FSL_PQ_MDIO is not set # CONFIG_GIANFAR is not set +# CONFIG_MV643XX_ETH is not set CONFIG_NETDEV_10000=y # @@ -496,11 +518,11 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y @@ -562,6 +584,11 @@ CONFIG_GEN_RTC=y # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -597,22 +624,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -664,6 +676,10 @@ CONFIG_USB_SUPPORT=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -685,10 +701,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -808,6 +826,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -831,22 +850,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set diff --git a/arch/powerpc/configs/mpc86xx_defconfig b/arch/powerpc/configs/mpc86xx_defconfig index 5bb1b8e..0e8684a 100644 --- a/arch/powerpc/configs/mpc86xx_defconfig +++ b/arch/powerpc/configs/mpc86xx_defconfig @@ -1,26 +1,28 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:00 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:31:58 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_PHYS_64BIT is not set CONFIG_ALTIVEC=y CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y CONFIG_SMP=y CONFIG_NR_CPUS=2 CONFIG_PPC32=y @@ -32,15 +34,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set @@ -55,11 +58,13 @@ CONFIG_PPC_UDBG_16550=y CONFIG_GENERIC_TBSYNC=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -114,7 +119,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -127,9 +131,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -144,6 +155,10 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_USE_GENERIC_SMP_HELPERS=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -157,7 +172,7 @@ CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y -CONFIG_LBD=y +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -236,7 +251,9 @@ CONFIG_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=m -# CONFIG_IOMMU_HELPER is not set +CONFIG_IOMMU_HELPER=y +CONFIG_SWIOTLB=y +CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -258,9 +275,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -403,6 +420,7 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -421,7 +439,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -447,6 +469,7 @@ CONFIG_EXTRA_FIRMWARE="" CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -482,7 +505,9 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set CONFIG_EEPROM_LEGACY=y +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -506,10 +531,6 @@ CONFIG_BLK_DEV_SR=y # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set CONFIG_SCSI_LOGGING=y @@ -527,6 +548,7 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -535,6 +557,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set @@ -554,7 +577,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -638,14 +660,17 @@ CONFIG_PATA_ALI=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=y # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -692,6 +717,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -711,8 +737,10 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -913,13 +941,17 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y @@ -973,76 +1005,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -CONFIG_DVB_CORE=m -CONFIG_VIDEO_MEDIA=m - -# -# Multimedia drivers -# -# CONFIG_MEDIA_ATTACH is not set -CONFIG_MEDIA_TUNER=m -# CONFIG_MEDIA_TUNER_CUSTOMISE is not set -CONFIG_MEDIA_TUNER_SIMPLE=m -CONFIG_MEDIA_TUNER_TDA8290=m -CONFIG_MEDIA_TUNER_TDA9887=m -CONFIG_MEDIA_TUNER_TEA5761=m -CONFIG_MEDIA_TUNER_TEA5767=m -CONFIG_MEDIA_TUNER_MT20XX=m -CONFIG_MEDIA_TUNER_XC2028=m -CONFIG_MEDIA_TUNER_XC5000=m -CONFIG_MEDIA_TUNER_MC44S803=m -# CONFIG_DVB_DYNAMIC_MINORS is not set -CONFIG_DVB_CAPTURE_DRIVERS=y - -# -# Supported SAA7146 based PCI Adapters -# -# CONFIG_TTPCI_EEPROM is not set -# CONFIG_DVB_BUDGET_CORE is not set - -# -# Supported USB Adapters -# -# CONFIG_DVB_USB is not set -# CONFIG_DVB_TTUSB_BUDGET is not set -# CONFIG_DVB_TTUSB_DEC is not set -# CONFIG_DVB_SIANO_SMS1XXX is not set - -# -# Supported FlexCopII (B2C2) Adapters -# -# CONFIG_DVB_B2C2_FLEXCOP is not set - -# -# Supported BT878 Adapters -# - -# -# Supported Pluto2 Adapters -# -# CONFIG_DVB_PLUTO2 is not set - -# -# Supported SDMC DM1105 Adapters -# -# CONFIG_DVB_DM1105 is not set - -# -# Supported DVB Frontends -# -# CONFIG_DVB_FE_CUSTOMISE is not set -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1082,6 +1047,11 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set CONFIG_SND_VMASTER=y +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set CONFIG_SND_AC97_CODEC=y CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set @@ -1108,6 +1078,7 @@ CONFIG_SND_PCI=y # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS5530 is not set +# CONFIG_SND_CTXFI is not set # CONFIG_SND_DARLA20 is not set # CONFIG_SND_GINA20 is not set # CONFIG_SND_LAYLA20 is not set @@ -1138,6 +1109,7 @@ CONFIG_SND_PCI=y CONFIG_SND_INTEL8X0=y # CONFIG_SND_INTEL8X0M is not set # CONFIG_SND_KORG1212 is not set +# CONFIG_SND_LX6464ES is not set # CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_MIXART is not set # CONFIG_SND_NM256 is not set @@ -1182,7 +1154,7 @@ CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y -# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_DRAGONRISE is not set CONFIG_HID_EZKEY=y # CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y @@ -1199,10 +1171,11 @@ CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y -# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set # CONFIG_HID_TOPSEED is not set -CONFIG_THRUSTMASTER_FF=m -CONFIG_ZEROPLUS_FF=m +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1228,6 +1201,7 @@ CONFIG_USB_MON=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set @@ -1237,9 +1211,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y CONFIG_USB_OHCI_HCD_PPC_OF_LE=y +CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PCI=y CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y @@ -1360,6 +1334,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1387,6 +1362,10 @@ CONFIG_RTC_DRV_CMOS=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1406,11 +1385,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1485,6 +1465,7 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y CONFIG_NFSD=y # CONFIG_NFSD_V3 is not set @@ -1586,6 +1567,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1616,6 +1598,9 @@ CONFIG_SCHED_DEBUG=y # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -1628,7 +1613,6 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set @@ -1642,16 +1626,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -1659,6 +1642,9 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set diff --git a/arch/powerpc/configs/mpc885_ads_defconfig b/arch/powerpc/configs/mpc885_ads_defconfig index 42e64eb..dbe8e869 100644 --- a/arch/powerpc/configs/mpc885_ads_defconfig +++ b/arch/powerpc/configs/mpc885_ads_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:01 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:31:59 2009 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set # CONFIG_PPC_85xx is not set CONFIG_PPC_8xx=y # CONFIG_40x is not set @@ -27,15 +27,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -49,11 +50,13 @@ CONFIG_OF=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -100,7 +103,6 @@ CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -113,8 +115,15 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -128,13 +137,17 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_BASE_SMALL=1 # CONFIG_MODULES is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -227,6 +240,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_MATH_EMULATION is not set CONFIG_8XX_MINIMAL_FPEMU=y # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y @@ -246,9 +260,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -287,6 +301,7 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0x80000000 +CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # @@ -343,6 +358,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -360,7 +376,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -463,6 +483,7 @@ CONFIG_MTD_PHYSMAP_OF=y # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set # CONFIG_BLK_DEV is not set # CONFIG_MISC_DEVICES is not set @@ -480,7 +501,6 @@ CONFIG_HAVE_IDE=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -519,6 +539,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set CONFIG_FS_ENET_HAS_FEC=y @@ -590,6 +611,11 @@ CONFIG_GEN_RTC=y # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -613,22 +639,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -653,6 +664,10 @@ CONFIG_DAB=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -664,12 +679,15 @@ CONFIG_DAB=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set @@ -786,6 +804,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -814,6 +833,9 @@ CONFIG_SCHED_DEBUG=y # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -825,7 +847,6 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set @@ -838,16 +859,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -855,6 +875,9 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set diff --git a/arch/powerpc/configs/pq2fads_defconfig b/arch/powerpc/configs/pq2fads_defconfig index 129d808..ff96bb4 100644 --- a/arch/powerpc/configs/pq2fads_defconfig +++ b/arch/powerpc/configs/pq2fads_defconfig @@ -1,25 +1,27 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:02 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:00 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 @@ -30,15 +32,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set @@ -53,11 +56,13 @@ CONFIG_OF=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -103,7 +108,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -116,9 +120,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -132,6 +143,10 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -139,7 +154,7 @@ CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_INTEGRITY is not set # @@ -219,6 +234,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -234,9 +250,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -307,6 +323,7 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set CONFIG_SYN_COOKIES=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set @@ -387,7 +404,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set @@ -493,6 +514,7 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -518,6 +540,7 @@ CONFIG_MISC_DEVICES=y # EEPROM support # # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y @@ -583,13 +606,17 @@ CONFIG_IDE_PROC_FS=y # # -# A new alternative FireWire stack is available with EXPERIMENTAL=y +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # +# CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set @@ -636,6 +663,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set @@ -657,8 +685,10 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set # CONFIG_FSL_PQ_MDIO is not set # CONFIG_GIANFAR is not set +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_JME is not set @@ -730,12 +760,13 @@ CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_MATRIX is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set -# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y @@ -802,6 +833,10 @@ CONFIG_HW_RANDOM=y CONFIG_DEVPORT=y # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y @@ -845,22 +880,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -903,8 +923,9 @@ CONFIG_USB_GADGET_SELECTED=y # CONFIG_USB_GADGET_OMAP is not set # CONFIG_USB_GADGET_PXA25X is not set # CONFIG_USB_GADGET_PXA27X is not set -# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_S3C_HSOTG is not set # CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_S3C2410 is not set CONFIG_USB_GADGET_M66592=y CONFIG_USB_M66592=y # CONFIG_USB_GADGET_AMD5536UDC is not set @@ -912,9 +933,11 @@ CONFIG_USB_M66592=y # CONFIG_USB_GADGET_CI13XXX is not set # CONFIG_USB_GADGET_NET2280 is not set # CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LANGWELL is not set # CONFIG_USB_GADGET_DUMMY_HCD is not set CONFIG_USB_GADGET_DUALSPEED=y # CONFIG_USB_ZERO is not set +# CONFIG_USB_AUDIO is not set CONFIG_USB_ETH=y CONFIG_USB_ETH_RNDIS=y # CONFIG_USB_GADGETFS is not set @@ -939,6 +962,10 @@ CONFIG_USB_ETH_RNDIS=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -958,9 +985,10 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1110,6 +1138,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1140,6 +1169,9 @@ CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -1151,7 +1183,6 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set @@ -1165,22 +1196,23 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set diff --git a/arch/powerpc/configs/prpmc2800_defconfig b/arch/powerpc/configs/prpmc2800_defconfig index e9f287f..1293c46 100644 --- a/arch/powerpc/configs/prpmc2800_defconfig +++ b/arch/powerpc/configs/prpmc2800_defconfig @@ -1,25 +1,27 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:03 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:01 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y CONFIG_ALTIVEC=y CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_SMP is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_CHECK_CACHE_COHERENCY=y @@ -32,15 +34,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -54,11 +57,13 @@ CONFIG_OF=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -114,7 +119,6 @@ CONFIG_ANON_INODES=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -127,9 +131,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -142,6 +153,10 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -149,7 +164,7 @@ CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y -CONFIG_LBD=y +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -228,6 +243,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y @@ -249,9 +265,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -296,6 +312,7 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 +CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # @@ -357,6 +374,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -374,7 +392,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -479,6 +501,7 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -514,7 +537,9 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y @@ -591,10 +616,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -611,6 +632,7 @@ CONFIG_BLK_DEV_SD=y CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -619,6 +641,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set @@ -638,7 +661,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -721,7 +743,11 @@ CONFIG_SATA_MV=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -730,7 +756,6 @@ CONFIG_MACINTOSH_DRIVERS=y # CONFIG_MAC_EMUMOUSEBTN is not set # CONFIG_WINDFARM is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -797,6 +822,7 @@ CONFIG_8139TOO=y # CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set +# CONFIG_KS8842 is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set @@ -818,6 +844,7 @@ CONFIG_E1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_MV643XX_ETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set @@ -1007,13 +1034,17 @@ CONFIG_I2C_MV64XXX=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -1068,6 +1099,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1102,23 +1134,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1163,6 +1181,7 @@ CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y +CONFIG_HID_DRAGONRISE=y # CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y CONFIG_HID_KYE=y @@ -1180,9 +1199,14 @@ CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y +CONFIG_HID_GREENASIA=y # CONFIG_GREENASIA_FF is not set +CONFIG_HID_SMARTJOYPLUS=y +# CONFIG_SMARTJOYPLUS_FF is not set CONFIG_HID_TOPSEED=y +CONFIG_HID_THRUSTMASTER=y CONFIG_THRUSTMASTER_FF=y +CONFIG_HID_ZEROPLUS=y CONFIG_ZEROPLUS_FF=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y @@ -1207,6 +1231,7 @@ CONFIG_USB_MON=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set @@ -1215,6 +1240,8 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set +# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set # CONFIG_USB_OHCI_HCD_PPC_OF is not set # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set @@ -1322,6 +1349,7 @@ CONFIG_RTC_DRV_MAX6900=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1349,6 +1377,10 @@ CONFIG_RTC_DRV_MAX6900=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1368,11 +1400,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1469,7 +1502,46 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # CONFIG_SYSV68_PARTITION is not set -# CONFIG_NLS is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set # CONFIG_BINARY_PRINTF is not set @@ -1494,6 +1566,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1519,22 +1592,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig index bd4a8d4..28384dc 100644 --- a/arch/powerpc/configs/storcenter_defconfig +++ b/arch/powerpc/configs/storcenter_defconfig @@ -1,25 +1,27 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc3 -# Wed May 13 17:22:04 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 23:32:01 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 @@ -30,15 +32,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -52,11 +55,13 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -101,7 +106,6 @@ CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -114,9 +118,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -129,6 +140,10 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -141,7 +156,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -CONFIG_LBD=y +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -222,6 +237,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -242,9 +258,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -347,6 +363,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -364,7 +381,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -501,7 +522,9 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y @@ -579,10 +602,6 @@ CONFIG_BLK_DEV_SR=y # CONFIG_BLK_DEV_SR_VENDOR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -599,6 +618,7 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -607,6 +627,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set @@ -626,7 +647,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_QLOGIC_1280 is not set @@ -660,14 +680,17 @@ CONFIG_MD_RAID6_PQ=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -695,8 +718,10 @@ CONFIG_R8169=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set # CONFIG_FSL_PQ_MDIO is not set # CONFIG_GIANFAR is not set +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -845,13 +870,17 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -879,23 +908,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -937,6 +952,7 @@ CONFIG_USB_DEVICE_CLASS=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set @@ -946,6 +962,8 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set +# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set # CONFIG_USB_OHCI_HCD_PPC_OF is not set # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set @@ -1064,6 +1082,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1091,6 +1110,10 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1110,7 +1133,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y CONFIG_XFS_FS=m # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_POSIX_ACL is not set @@ -1119,6 +1141,8 @@ CONFIG_XFS_FS=m # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1273,6 +1297,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1298,22 +1323,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set -- cgit v1.1 From 2e04ef76916d1e29a077ea9d0f2003c8fd86724d Mon Sep 17 00:00:00 2001 From: Rusty Russell <rusty@rustcorp.com.au> Date: Thu, 30 Jul 2009 16:03:45 -0600 Subject: lguest: fix comment style I don't really notice it (except to begrudge the extra vertical space), but Ingo does. And he pointed out that one excuse of lguest is as a teaching tool, it should set a good example. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Ingo Molnar <mingo@redhat.com> --- arch/x86/include/asm/lguest.h | 3 +- arch/x86/include/asm/lguest_hcall.h | 10 +- arch/x86/lguest/boot.c | 428 +++++++++++++++++++++++------------- arch/x86/lguest/i386_head.S | 110 +++++---- 4 files changed, 353 insertions(+), 198 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/lguest.h b/arch/x86/include/asm/lguest.h index 313389c..5136dad 100644 --- a/arch/x86/include/asm/lguest.h +++ b/arch/x86/include/asm/lguest.h @@ -17,8 +17,7 @@ /* Pages for switcher itself, then two pages per cpu */ #define TOTAL_SWITCHER_PAGES (SHARED_SWITCHER_PAGES + 2 * nr_cpu_ids) -/* We map at -4M (-2M when PAE is activated) for ease of mapping - * into the guest (one PTE page). */ +/* We map at -4M (-2M for PAE) for ease of mapping (one PTE page). */ #ifdef CONFIG_X86_PAE #define SWITCHER_ADDR 0xFFE00000 #else diff --git a/arch/x86/include/asm/lguest_hcall.h b/arch/x86/include/asm/lguest_hcall.h index 33600a6..cceb73e 100644 --- a/arch/x86/include/asm/lguest_hcall.h +++ b/arch/x86/include/asm/lguest_hcall.h @@ -30,7 +30,8 @@ #include <asm/hw_irq.h> #include <asm/kvm_para.h> -/*G:030 But first, how does our Guest contact the Host to ask for privileged +/*G:030 + * But first, how does our Guest contact the Host to ask for privileged * operations? There are two ways: the direct way is to make a "hypercall", * to make requests of the Host Itself. * @@ -41,16 +42,15 @@ * * Grossly invalid calls result in Sudden Death at the hands of the vengeful * Host, rather than returning failure. This reflects Winston Churchill's - * definition of a gentleman: "someone who is only rude intentionally". */ -/*:*/ + * definition of a gentleman: "someone who is only rude intentionally". +:*/ /* Can't use our min() macro here: needs to be a constant */ #define LGUEST_IRQS (NR_IRQS < 32 ? NR_IRQS: 32) #define LHCALL_RING_SIZE 64 struct hcall_args { - /* These map directly onto eax, ebx, ecx, edx and esi - * in struct lguest_regs */ + /* These map directly onto eax/ebx/ecx/edx/esi in struct lguest_regs */ unsigned long arg0, arg1, arg2, arg3, arg4; }; diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c index f2bf1f7..025c04d 100644 --- a/arch/x86/lguest/boot.c +++ b/arch/x86/lguest/boot.c @@ -22,7 +22,8 @@ * * So how does the kernel know it's a Guest? We'll see that later, but let's * just say that we end up here where we replace the native functions various - * "paravirt" structures with our Guest versions, then boot like normal. :*/ + * "paravirt" structures with our Guest versions, then boot like normal. +:*/ /* * Copyright (C) 2006, Rusty Russell <rusty@rustcorp.com.au> IBM Corporation. @@ -74,7 +75,8 @@ * * The Guest in our tale is a simple creature: identical to the Host but * behaving in simplified but equivalent ways. In particular, the Guest is the - * same kernel as the Host (or at least, built from the same source code). :*/ + * same kernel as the Host (or at least, built from the same source code). +:*/ struct lguest_data lguest_data = { .hcall_status = { [0 ... LHCALL_RING_SIZE-1] = 0xFF }, @@ -85,7 +87,8 @@ struct lguest_data lguest_data = { .syscall_vec = SYSCALL_VECTOR, }; -/*G:037 async_hcall() is pretty simple: I'm quite proud of it really. We have a +/*G:037 + * async_hcall() is pretty simple: I'm quite proud of it really. We have a * ring buffer of stored hypercalls which the Host will run though next time we * do a normal hypercall. Each entry in the ring has 5 slots for the hypercall * arguments, and a "hcall_status" word which is 0 if the call is ready to go, @@ -94,7 +97,8 @@ struct lguest_data lguest_data = { * If we come around to a slot which hasn't been finished, then the table is * full and we just make the hypercall directly. This has the nice side * effect of causing the Host to run all the stored calls in the ring buffer - * which empties it for next time! */ + * which empties it for next time! + */ static void async_hcall(unsigned long call, unsigned long arg1, unsigned long arg2, unsigned long arg3, unsigned long arg4) @@ -103,9 +107,11 @@ static void async_hcall(unsigned long call, unsigned long arg1, static unsigned int next_call; unsigned long flags; - /* Disable interrupts if not already disabled: we don't want an + /* + * Disable interrupts if not already disabled: we don't want an * interrupt handler making a hypercall while we're already doing - * one! */ + * one! + */ local_irq_save(flags); if (lguest_data.hcall_status[next_call] != 0xFF) { /* Table full, so do normal hcall which will flush table. */ @@ -125,8 +131,9 @@ static void async_hcall(unsigned long call, unsigned long arg1, local_irq_restore(flags); } -/*G:035 Notice the lazy_hcall() above, rather than hcall(). This is our first - * real optimization trick! +/*G:035 + * Notice the lazy_hcall() above, rather than hcall(). This is our first real + * optimization trick! * * When lazy_mode is set, it means we're allowed to defer all hypercalls and do * them as a batch when lazy_mode is eventually turned off. Because hypercalls @@ -136,7 +143,8 @@ static void async_hcall(unsigned long call, unsigned long arg1, * lguest_leave_lazy_mode(). * * So, when we're in lazy mode, we call async_hcall() to store the call for - * future processing: */ + * future processing: + */ static void lazy_hcall1(unsigned long call, unsigned long arg1) { @@ -208,9 +216,11 @@ static void lguest_end_context_switch(struct task_struct *next) * check there before it tries to deliver an interrupt. */ -/* save_flags() is expected to return the processor state (ie. "flags"). The +/* + * save_flags() is expected to return the processor state (ie. "flags"). The * flags word contains all kind of stuff, but in practice Linux only cares - * about the interrupt flag. Our "save_flags()" just returns that. */ + * about the interrupt flag. Our "save_flags()" just returns that. + */ static unsigned long save_fl(void) { return lguest_data.irq_enabled; @@ -222,13 +232,15 @@ static void irq_disable(void) lguest_data.irq_enabled = 0; } -/* Let's pause a moment. Remember how I said these are called so often? +/* + * Let's pause a moment. Remember how I said these are called so often? * Jeremy Fitzhardinge optimized them so hard early in 2009 that he had to * break some rules. In particular, these functions are assumed to save their * own registers if they need to: normal C functions assume they can trash the * eax register. To use normal C functions, we use * PV_CALLEE_SAVE_REGS_THUNK(), which pushes %eax onto the stack, calls the - * C function, then restores it. */ + * C function, then restores it. + */ PV_CALLEE_SAVE_REGS_THUNK(save_fl); PV_CALLEE_SAVE_REGS_THUNK(irq_disable); /*:*/ @@ -237,18 +249,20 @@ PV_CALLEE_SAVE_REGS_THUNK(irq_disable); extern void lg_irq_enable(void); extern void lg_restore_fl(unsigned long flags); -/*M:003 Note that we don't check for outstanding interrupts when we re-enable - * them (or when we unmask an interrupt). This seems to work for the moment, - * since interrupts are rare and we'll just get the interrupt on the next timer - * tick, but now we can run with CONFIG_NO_HZ, we should revisit this. One way - * would be to put the "irq_enabled" field in a page by itself, and have the - * Host write-protect it when an interrupt comes in when irqs are disabled. - * There will then be a page fault as soon as interrupts are re-enabled. +/*M:003 + * Note that we don't check for outstanding interrupts when we re-enable them + * (or when we unmask an interrupt). This seems to work for the moment, since + * interrupts are rare and we'll just get the interrupt on the next timer tick, + * but now we can run with CONFIG_NO_HZ, we should revisit this. One way would + * be to put the "irq_enabled" field in a page by itself, and have the Host + * write-protect it when an interrupt comes in when irqs are disabled. There + * will then be a page fault as soon as interrupts are re-enabled. * * A better method is to implement soft interrupt disable generally for x86: * instead of disabling interrupts, we set a flag. If an interrupt does come * in, we then disable them for real. This is uncommon, so we could simply use - * a hypercall for interrupt control and not worry about efficiency. :*/ + * a hypercall for interrupt control and not worry about efficiency. +:*/ /*G:034 * The Interrupt Descriptor Table (IDT). @@ -261,10 +275,12 @@ extern void lg_restore_fl(unsigned long flags); static void lguest_write_idt_entry(gate_desc *dt, int entrynum, const gate_desc *g) { - /* The gate_desc structure is 8 bytes long: we hand it to the Host in + /* + * The gate_desc structure is 8 bytes long: we hand it to the Host in * two 32-bit chunks. The whole 32-bit kernel used to hand descriptors * around like this; typesafety wasn't a big concern in Linux's early - * years. */ + * years. + */ u32 *desc = (u32 *)g; /* Keep the local copy up to date. */ native_write_idt_entry(dt, entrynum, g); @@ -272,9 +288,11 @@ static void lguest_write_idt_entry(gate_desc *dt, kvm_hypercall3(LHCALL_LOAD_IDT_ENTRY, entrynum, desc[0], desc[1]); } -/* Changing to a different IDT is very rare: we keep the IDT up-to-date every +/* + * Changing to a different IDT is very rare: we keep the IDT up-to-date every * time it is written, so we can simply loop through all entries and tell the - * Host about them. */ + * Host about them. + */ static void lguest_load_idt(const struct desc_ptr *desc) { unsigned int i; @@ -305,9 +323,11 @@ static void lguest_load_gdt(const struct desc_ptr *desc) kvm_hypercall3(LHCALL_LOAD_GDT_ENTRY, i, gdt[i].a, gdt[i].b); } -/* For a single GDT entry which changes, we do the lazy thing: alter our GDT, +/* + * For a single GDT entry which changes, we do the lazy thing: alter our GDT, * then tell the Host to reload the entire thing. This operation is so rare - * that this naive implementation is reasonable. */ + * that this naive implementation is reasonable. + */ static void lguest_write_gdt_entry(struct desc_struct *dt, int entrynum, const void *desc, int type) { @@ -317,29 +337,36 @@ static void lguest_write_gdt_entry(struct desc_struct *dt, int entrynum, dt[entrynum].a, dt[entrynum].b); } -/* OK, I lied. There are three "thread local storage" GDT entries which change +/* + * OK, I lied. There are three "thread local storage" GDT entries which change * on every context switch (these three entries are how glibc implements - * __thread variables). So we have a hypercall specifically for this case. */ + * __thread variables). So we have a hypercall specifically for this case. + */ static void lguest_load_tls(struct thread_struct *t, unsigned int cpu) { - /* There's one problem which normal hardware doesn't have: the Host + /* + * There's one problem which normal hardware doesn't have: the Host * can't handle us removing entries we're currently using. So we clear - * the GS register here: if it's needed it'll be reloaded anyway. */ + * the GS register here: if it's needed it'll be reloaded anyway. + */ lazy_load_gs(0); lazy_hcall2(LHCALL_LOAD_TLS, __pa(&t->tls_array), cpu); } -/*G:038 That's enough excitement for now, back to ploughing through each of - * the different pv_ops structures (we're about 1/3 of the way through). +/*G:038 + * That's enough excitement for now, back to ploughing through each of the + * different pv_ops structures (we're about 1/3 of the way through). * * This is the Local Descriptor Table, another weird Intel thingy. Linux only * uses this for some strange applications like Wine. We don't do anything - * here, so they'll get an informative and friendly Segmentation Fault. */ + * here, so they'll get an informative and friendly Segmentation Fault. + */ static void lguest_set_ldt(const void *addr, unsigned entries) { } -/* This loads a GDT entry into the "Task Register": that entry points to a +/* + * This loads a GDT entry into the "Task Register": that entry points to a * structure called the Task State Segment. Some comments scattered though the * kernel code indicate that this used for task switching in ages past, along * with blood sacrifice and astrology. @@ -347,19 +374,21 @@ static void lguest_set_ldt(const void *addr, unsigned entries) * Now there's nothing interesting in here that we don't get told elsewhere. * But the native version uses the "ltr" instruction, which makes the Host * complain to the Guest about a Segmentation Fault and it'll oops. So we - * override the native version with a do-nothing version. */ + * override the native version with a do-nothing version. + */ static void lguest_load_tr_desc(void) { } -/* The "cpuid" instruction is a way of querying both the CPU identity +/* + * The "cpuid" instruction is a way of querying both the CPU identity * (manufacturer, model, etc) and its features. It was introduced before the * Pentium in 1993 and keeps getting extended by both Intel, AMD and others. * As you might imagine, after a decade and a half this treatment, it is now a * giant ball of hair. Its entry in the current Intel manual runs to 28 pages. * * This instruction even it has its own Wikipedia entry. The Wikipedia entry - * has been translated into 4 languages. I am not making this up! + * has been translated into 5 languages. I am not making this up! * * We could get funky here and identify ourselves as "GenuineLguest", but * instead we just use the real "cpuid" instruction. Then I pretty much turned @@ -371,7 +400,8 @@ static void lguest_load_tr_desc(void) * Replacing the cpuid so we can turn features off is great for the kernel, but * anyone (including userspace) can just use the raw "cpuid" instruction and * the Host won't even notice since it isn't privileged. So we try not to get - * too worked up about it. */ + * too worked up about it. + */ static void lguest_cpuid(unsigned int *ax, unsigned int *bx, unsigned int *cx, unsigned int *dx) { @@ -379,43 +409,63 @@ static void lguest_cpuid(unsigned int *ax, unsigned int *bx, native_cpuid(ax, bx, cx, dx); switch (function) { - case 0: /* ID and highest CPUID. Futureproof a little by sticking to - * older ones. */ + /* + * CPUID 0 gives the highest legal CPUID number (and the ID string). + * We futureproof our code a little by sticking to known CPUID values. + */ + case 0: if (*ax > 5) *ax = 5; break; - case 1: /* Basic feature request. */ - /* We only allow kernel to see SSE3, CMPXCHG16B and SSSE3 */ + + /* + * CPUID 1 is a basic feature request. + * + * CX: we only allow kernel to see SSE3, CMPXCHG16B and SSSE3 + * DX: SSE, SSE2, FXSR, MMX, CMOV, CMPXCHG8B, TSC, FPU and PAE. + */ + case 1: *cx &= 0x00002201; - /* SSE, SSE2, FXSR, MMX, CMOV, CMPXCHG8B, TSC, FPU, PAE. */ *dx &= 0x07808151; - /* The Host can do a nice optimization if it knows that the + /* + * The Host can do a nice optimization if it knows that the * kernel mappings (addresses above 0xC0000000 or whatever * PAGE_OFFSET is set to) haven't changed. But Linux calls * flush_tlb_user() for both user and kernel mappings unless - * the Page Global Enable (PGE) feature bit is set. */ + * the Page Global Enable (PGE) feature bit is set. + */ *dx |= 0x00002000; - /* We also lie, and say we're family id 5. 6 or greater + /* + * We also lie, and say we're family id 5. 6 or greater * leads to a rdmsr in early_init_intel which we can't handle. - * Family ID is returned as bits 8-12 in ax. */ + * Family ID is returned as bits 8-12 in ax. + */ *ax &= 0xFFFFF0FF; *ax |= 0x00000500; break; + /* + * 0x80000000 returns the highest Extended Function, so we futureproof + * like we do above by limiting it to known fields. + */ case 0x80000000: - /* Futureproof this a little: if they ask how much extended - * processor information there is, limit it to known fields. */ if (*ax > 0x80000008) *ax = 0x80000008; break; + + /* + * PAE systems can mark pages as non-executable. Linux calls this the + * NX bit. Intel calls it XD (eXecute Disable), AMD EVP (Enhanced + * Virus Protection). We just switch turn if off here, since we don't + * support it. + */ case 0x80000001: - /* Here we should fix nx cap depending on host. */ - /* For this version of PAE, we just clear NX bit. */ *dx &= ~(1 << 20); break; } } -/* Intel has four control registers, imaginatively named cr0, cr2, cr3 and cr4. +/* + * Intel has four control registers, imaginatively named cr0, cr2, cr3 and cr4. * I assume there's a cr1, but it hasn't bothered us yet, so we'll not bother * it. The Host needs to know when the Guest wants to change them, so we have * a whole series of functions like read_cr0() and write_cr0(). @@ -430,7 +480,8 @@ static void lguest_cpuid(unsigned int *ax, unsigned int *bx, * name like "FPUTRAP bit" be a little less cryptic? * * We store cr0 locally because the Host never changes it. The Guest sometimes - * wants to read it and we'd prefer not to bother the Host unnecessarily. */ + * wants to read it and we'd prefer not to bother the Host unnecessarily. + */ static unsigned long current_cr0; static void lguest_write_cr0(unsigned long val) { @@ -443,18 +494,22 @@ static unsigned long lguest_read_cr0(void) return current_cr0; } -/* Intel provided a special instruction to clear the TS bit for people too cool +/* + * Intel provided a special instruction to clear the TS bit for people too cool * to use write_cr0() to do it. This "clts" instruction is faster, because all - * the vowels have been optimized out. */ + * the vowels have been optimized out. + */ static void lguest_clts(void) { lazy_hcall1(LHCALL_TS, 0); current_cr0 &= ~X86_CR0_TS; } -/* cr2 is the virtual address of the last page fault, which the Guest only ever +/* + * cr2 is the virtual address of the last page fault, which the Guest only ever * reads. The Host kindly writes this into our "struct lguest_data", so we - * just read it out of there. */ + * just read it out of there. + */ static unsigned long lguest_read_cr2(void) { return lguest_data.cr2; @@ -463,10 +518,12 @@ static unsigned long lguest_read_cr2(void) /* See lguest_set_pte() below. */ static bool cr3_changed = false; -/* cr3 is the current toplevel pagetable page: the principle is the same as +/* + * cr3 is the current toplevel pagetable page: the principle is the same as * cr0. Keep a local copy, and tell the Host when it changes. The only * difference is that our local copy is in lguest_data because the Host needs - * to set it upon our initial hypercall. */ + * to set it upon our initial hypercall. + */ static void lguest_write_cr3(unsigned long cr3) { lguest_data.pgdir = cr3; @@ -538,10 +595,12 @@ static void lguest_write_cr4(unsigned long val) * the real page tables based on the Guests'. */ -/* The Guest calls this to set a second-level entry (pte), ie. to map a page +/* + * The Guest calls this to set a second-level entry (pte), ie. to map a page * into a process' address space. We set the entry then tell the Host the * toplevel and address this corresponds to. The Guest uses one pagetable per - * process, so we need to tell the Host which one we're changing (mm->pgd). */ + * process, so we need to tell the Host which one we're changing (mm->pgd). + */ static void lguest_pte_update(struct mm_struct *mm, unsigned long addr, pte_t *ptep) { @@ -560,10 +619,13 @@ static void lguest_set_pte_at(struct mm_struct *mm, unsigned long addr, lguest_pte_update(mm, addr, ptep); } -/* The Guest calls lguest_set_pud to set a top-level entry and lguest_set_pmd +/* + * The Guest calls lguest_set_pud to set a top-level entry and lguest_set_pmd * to set a middle-level entry when PAE is activated. + * * Again, we set the entry then tell the Host which page we changed, - * and the index of the entry we changed. */ + * and the index of the entry we changed. + */ #ifdef CONFIG_X86_PAE static void lguest_set_pud(pud_t *pudp, pud_t pudval) { @@ -582,8 +644,7 @@ static void lguest_set_pmd(pmd_t *pmdp, pmd_t pmdval) } #else -/* The Guest calls lguest_set_pmd to set a top-level entry when PAE is not - * activated. */ +/* The Guest calls lguest_set_pmd to set a top-level entry when !PAE. */ static void lguest_set_pmd(pmd_t *pmdp, pmd_t pmdval) { native_set_pmd(pmdp, pmdval); @@ -592,7 +653,8 @@ static void lguest_set_pmd(pmd_t *pmdp, pmd_t pmdval) } #endif -/* There are a couple of legacy places where the kernel sets a PTE, but we +/* + * There are a couple of legacy places where the kernel sets a PTE, but we * don't know the top level any more. This is useless for us, since we don't * know which pagetable is changing or what address, so we just tell the Host * to forget all of them. Fortunately, this is very rare. @@ -600,7 +662,8 @@ static void lguest_set_pmd(pmd_t *pmdp, pmd_t pmdval) * ... except in early boot when the kernel sets up the initial pagetables, * which makes booting astonishingly slow: 1.83 seconds! So we don't even tell * the Host anything changed until we've done the first page table switch, - * which brings boot back to 0.25 seconds. */ + * which brings boot back to 0.25 seconds. + */ static void lguest_set_pte(pte_t *ptep, pte_t pteval) { native_set_pte(ptep, pteval); @@ -628,7 +691,8 @@ void lguest_pmd_clear(pmd_t *pmdp) } #endif -/* Unfortunately for Lguest, the pv_mmu_ops for page tables were based on +/* + * Unfortunately for Lguest, the pv_mmu_ops for page tables were based on * native page table operations. On native hardware you can set a new page * table entry whenever you want, but if you want to remove one you have to do * a TLB flush (a TLB is a little cache of page table entries kept by the CPU). @@ -637,24 +701,29 @@ void lguest_pmd_clear(pmd_t *pmdp) * called when a valid entry is written, not when it's removed (ie. marked not * present). Instead, this is where we come when the Guest wants to remove a * page table entry: we tell the Host to set that entry to 0 (ie. the present - * bit is zero). */ + * bit is zero). + */ static void lguest_flush_tlb_single(unsigned long addr) { /* Simply set it to zero: if it was not, it will fault back in. */ lazy_hcall3(LHCALL_SET_PTE, lguest_data.pgdir, addr, 0); } -/* This is what happens after the Guest has removed a large number of entries. +/* + * This is what happens after the Guest has removed a large number of entries. * This tells the Host that any of the page table entries for userspace might - * have changed, ie. virtual addresses below PAGE_OFFSET. */ + * have changed, ie. virtual addresses below PAGE_OFFSET. + */ static void lguest_flush_tlb_user(void) { lazy_hcall1(LHCALL_FLUSH_TLB, 0); } -/* This is called when the kernel page tables have changed. That's not very +/* + * This is called when the kernel page tables have changed. That's not very * common (unless the Guest is using highmem, which makes the Guest extremely - * slow), so it's worth separating this from the user flushing above. */ + * slow), so it's worth separating this from the user flushing above. + */ static void lguest_flush_tlb_kernel(void) { lazy_hcall1(LHCALL_FLUSH_TLB, 1); @@ -691,23 +760,27 @@ static struct irq_chip lguest_irq_controller = { .unmask = enable_lguest_irq, }; -/* This sets up the Interrupt Descriptor Table (IDT) entry for each hardware +/* + * This sets up the Interrupt Descriptor Table (IDT) entry for each hardware * interrupt (except 128, which is used for system calls), and then tells the * Linux infrastructure that each interrupt is controlled by our level-based - * lguest interrupt controller. */ + * lguest interrupt controller. + */ static void __init lguest_init_IRQ(void) { unsigned int i; for (i = FIRST_EXTERNAL_VECTOR; i < NR_VECTORS; i++) { - /* Some systems map "vectors" to interrupts weirdly. Lguest has - * a straightforward 1 to 1 mapping, so force that here. */ + /* Some systems map "vectors" to interrupts weirdly. Not us! */ __get_cpu_var(vector_irq)[i] = i - FIRST_EXTERNAL_VECTOR; if (i != SYSCALL_VECTOR) set_intr_gate(i, interrupt[i - FIRST_EXTERNAL_VECTOR]); } - /* This call is required to set up for 4k stacks, where we have - * separate stacks for hard and soft interrupts. */ + + /* + * This call is required to set up for 4k stacks, where we have + * separate stacks for hard and soft interrupts. + */ irq_ctx_init(smp_processor_id()); } @@ -729,31 +802,39 @@ static unsigned long lguest_get_wallclock(void) return lguest_data.time.tv_sec; } -/* The TSC is an Intel thing called the Time Stamp Counter. The Host tells us +/* + * The TSC is an Intel thing called the Time Stamp Counter. The Host tells us * what speed it runs at, or 0 if it's unusable as a reliable clock source. * This matches what we want here: if we return 0 from this function, the x86 - * TSC clock will give up and not register itself. */ + * TSC clock will give up and not register itself. + */ static unsigned long lguest_tsc_khz(void) { return lguest_data.tsc_khz; } -/* If we can't use the TSC, the kernel falls back to our lower-priority - * "lguest_clock", where we read the time value given to us by the Host. */ +/* + * If we can't use the TSC, the kernel falls back to our lower-priority + * "lguest_clock", where we read the time value given to us by the Host. + */ static cycle_t lguest_clock_read(struct clocksource *cs) { unsigned long sec, nsec; - /* Since the time is in two parts (seconds and nanoseconds), we risk + /* + * Since the time is in two parts (seconds and nanoseconds), we risk * reading it just as it's changing from 99 & 0.999999999 to 100 and 0, * and getting 99 and 0. As Linux tends to come apart under the stress - * of time travel, we must be careful: */ + * of time travel, we must be careful: + */ do { /* First we read the seconds part. */ sec = lguest_data.time.tv_sec; - /* This read memory barrier tells the compiler and the CPU that + /* + * This read memory barrier tells the compiler and the CPU that * this can't be reordered: we have to complete the above - * before going on. */ + * before going on. + */ rmb(); /* Now we read the nanoseconds part. */ nsec = lguest_data.time.tv_nsec; @@ -777,9 +858,11 @@ static struct clocksource lguest_clock = { .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; -/* We also need a "struct clock_event_device": Linux asks us to set it to go +/* + * We also need a "struct clock_event_device": Linux asks us to set it to go * off some time in the future. Actually, James Morris figured all this out, I - * just applied the patch. */ + * just applied the patch. + */ static int lguest_clockevent_set_next_event(unsigned long delta, struct clock_event_device *evt) { @@ -829,8 +912,10 @@ static struct clock_event_device lguest_clockevent = { .max_delta_ns = LG_CLOCK_MAX_DELTA, }; -/* This is the Guest timer interrupt handler (hardware interrupt 0). We just - * call the clockevent infrastructure and it does whatever needs doing. */ +/* + * This is the Guest timer interrupt handler (hardware interrupt 0). We just + * call the clockevent infrastructure and it does whatever needs doing. + */ static void lguest_time_irq(unsigned int irq, struct irq_desc *desc) { unsigned long flags; @@ -841,10 +926,12 @@ static void lguest_time_irq(unsigned int irq, struct irq_desc *desc) local_irq_restore(flags); } -/* At some point in the boot process, we get asked to set up our timing +/* + * At some point in the boot process, we get asked to set up our timing * infrastructure. The kernel doesn't expect timer interrupts before this, but * we cleverly initialized the "blocked_interrupts" field of "struct - * lguest_data" so that timer interrupts were blocked until now. */ + * lguest_data" so that timer interrupts were blocked until now. + */ static void lguest_time_init(void) { /* Set up the timer interrupt (0) to go to our simple timer routine */ @@ -868,14 +955,16 @@ static void lguest_time_init(void) * to work. They're pretty simple. */ -/* The Guest needs to tell the Host what stack it expects traps to use. For +/* + * The Guest needs to tell the Host what stack it expects traps to use. For * native hardware, this is part of the Task State Segment mentioned above in * lguest_load_tr_desc(), but to help hypervisors there's this special call. * * We tell the Host the segment we want to use (__KERNEL_DS is the kernel data * segment), the privilege level (we're privilege level 1, the Host is 0 and * will not tolerate us trying to use that), the stack pointer, and the number - * of pages in the stack. */ + * of pages in the stack. + */ static void lguest_load_sp0(struct tss_struct *tss, struct thread_struct *thread) { @@ -889,7 +978,8 @@ static void lguest_set_debugreg(int regno, unsigned long value) /* FIXME: Implement */ } -/* There are times when the kernel wants to make sure that no memory writes are +/* + * There are times when the kernel wants to make sure that no memory writes are * caught in the cache (that they've all reached real hardware devices). This * doesn't matter for the Guest which has virtual hardware. * @@ -903,11 +993,13 @@ static void lguest_wbinvd(void) { } -/* If the Guest expects to have an Advanced Programmable Interrupt Controller, +/* + * If the Guest expects to have an Advanced Programmable Interrupt Controller, * we play dumb by ignoring writes and returning 0 for reads. So it's no * longer Programmable nor Controlling anything, and I don't think 8 lines of * code qualifies for Advanced. It will also never interrupt anything. It - * does, however, allow us to get through the Linux boot code. */ + * does, however, allow us to get through the Linux boot code. + */ #ifdef CONFIG_X86_LOCAL_APIC static void lguest_apic_write(u32 reg, u32 v) { @@ -956,11 +1048,13 @@ static void lguest_safe_halt(void) kvm_hypercall0(LHCALL_HALT); } -/* The SHUTDOWN hypercall takes a string to describe what's happening, and +/* + * The SHUTDOWN hypercall takes a string to describe what's happening, and * an argument which says whether this to restart (reboot) the Guest or not. * * Note that the Host always prefers that the Guest speak in physical addresses - * rather than virtual addresses, so we use __pa() here. */ + * rather than virtual addresses, so we use __pa() here. + */ static void lguest_power_off(void) { kvm_hypercall2(LHCALL_SHUTDOWN, __pa("Power down"), @@ -991,8 +1085,10 @@ static __init char *lguest_memory_setup(void) * nice to move it back to lguest_init. Patch welcome... */ atomic_notifier_chain_register(&panic_notifier_list, &paniced); - /* The Linux bootloader header contains an "e820" memory map: the - * Launcher populated the first entry with our memory limit. */ + /* + *The Linux bootloader header contains an "e820" memory map: the + * Launcher populated the first entry with our memory limit. + */ e820_add_region(boot_params.e820_map[0].addr, boot_params.e820_map[0].size, boot_params.e820_map[0].type); @@ -1001,16 +1097,17 @@ static __init char *lguest_memory_setup(void) return "LGUEST"; } -/* We will eventually use the virtio console device to produce console output, +/* + * We will eventually use the virtio console device to produce console output, * but before that is set up we use LHCALL_NOTIFY on normal memory to produce - * console output. */ + * console output. + */ static __init int early_put_chars(u32 vtermno, const char *buf, int count) { char scratch[17]; unsigned int len = count; - /* We use a nul-terminated string, so we have to make a copy. Icky, - * huh? */ + /* We use a nul-terminated string, so we make a copy. Icky, huh? */ if (len > sizeof(scratch) - 1) len = sizeof(scratch) - 1; scratch[len] = '\0'; @@ -1021,8 +1118,10 @@ static __init int early_put_chars(u32 vtermno, const char *buf, int count) return len; } -/* Rebooting also tells the Host we're finished, but the RESTART flag tells the - * Launcher to reboot us. */ +/* + * Rebooting also tells the Host we're finished, but the RESTART flag tells the + * Launcher to reboot us. + */ static void lguest_restart(char *reason) { kvm_hypercall2(LHCALL_SHUTDOWN, __pa(reason), LGUEST_SHUTDOWN_RESTART); @@ -1049,7 +1148,8 @@ static void lguest_restart(char *reason) * fit comfortably. * * First we need assembly templates of each of the patchable Guest operations, - * and these are in i386_head.S. */ + * and these are in i386_head.S. + */ /*G:060 We construct a table from the assembler templates: */ static const struct lguest_insns @@ -1060,9 +1160,11 @@ static const struct lguest_insns [PARAVIRT_PATCH(pv_irq_ops.save_fl)] = { lgstart_pushf, lgend_pushf }, }; -/* Now our patch routine is fairly simple (based on the native one in +/* + * Now our patch routine is fairly simple (based on the native one in * paravirt.c). If we have a replacement, we copy it in and return how much of - * the available space we used. */ + * the available space we used. + */ static unsigned lguest_patch(u8 type, u16 clobber, void *ibuf, unsigned long addr, unsigned len) { @@ -1074,8 +1176,7 @@ static unsigned lguest_patch(u8 type, u16 clobber, void *ibuf, insn_len = lguest_insns[type].end - lguest_insns[type].start; - /* Similarly if we can't fit replacement (shouldn't happen, but let's - * be thorough). */ + /* Similarly if it can't fit (doesn't happen, but let's be thorough). */ if (len < insn_len) return paravirt_patch_default(type, clobber, ibuf, addr, len); @@ -1084,22 +1185,28 @@ static unsigned lguest_patch(u8 type, u16 clobber, void *ibuf, return insn_len; } -/*G:029 Once we get to lguest_init(), we know we're a Guest. The various +/*G:029 + * Once we get to lguest_init(), we know we're a Guest. The various * pv_ops structures in the kernel provide points for (almost) every routine we - * have to override to avoid privileged instructions. */ + * have to override to avoid privileged instructions. + */ __init void lguest_init(void) { - /* We're under lguest, paravirt is enabled, and we're running at - * privilege level 1, not 0 as normal. */ + /* We're under lguest. */ pv_info.name = "lguest"; + /* Paravirt is enabled. */ pv_info.paravirt_enabled = 1; + /* We're running at privilege level 1, not 0 as normal. */ pv_info.kernel_rpl = 1; + /* Everyone except Xen runs with this set. */ pv_info.shared_kernel_pmd = 1; - /* We set up all the lguest overrides for sensitive operations. These - * are detailed with the operations themselves. */ + /* + * We set up all the lguest overrides for sensitive operations. These + * are detailed with the operations themselves. + */ - /* interrupt-related operations */ + /* Interrupt-related operations */ pv_irq_ops.init_IRQ = lguest_init_IRQ; pv_irq_ops.save_fl = PV_CALLEE_SAVE(save_fl); pv_irq_ops.restore_fl = __PV_IS_CALLEE_SAVE(lg_restore_fl); @@ -1107,11 +1214,11 @@ __init void lguest_init(void) pv_irq_ops.irq_enable = __PV_IS_CALLEE_SAVE(lg_irq_enable); pv_irq_ops.safe_halt = lguest_safe_halt; - /* init-time operations */ + /* Setup operations */ pv_init_ops.memory_setup = lguest_memory_setup; pv_init_ops.patch = lguest_patch; - /* Intercepts of various cpu instructions */ + /* Intercepts of various CPU instructions */ pv_cpu_ops.load_gdt = lguest_load_gdt; pv_cpu_ops.cpuid = lguest_cpuid; pv_cpu_ops.load_idt = lguest_load_idt; @@ -1132,7 +1239,7 @@ __init void lguest_init(void) pv_cpu_ops.start_context_switch = paravirt_start_context_switch; pv_cpu_ops.end_context_switch = lguest_end_context_switch; - /* pagetable management */ + /* Pagetable management */ pv_mmu_ops.write_cr3 = lguest_write_cr3; pv_mmu_ops.flush_tlb_user = lguest_flush_tlb_user; pv_mmu_ops.flush_tlb_single = lguest_flush_tlb_single; @@ -1154,54 +1261,71 @@ __init void lguest_init(void) pv_mmu_ops.pte_update_defer = lguest_pte_update; #ifdef CONFIG_X86_LOCAL_APIC - /* apic read/write intercepts */ + /* APIC read/write intercepts */ set_lguest_basic_apic_ops(); #endif - /* time operations */ + /* Time operations */ pv_time_ops.get_wallclock = lguest_get_wallclock; pv_time_ops.time_init = lguest_time_init; pv_time_ops.get_tsc_khz = lguest_tsc_khz; - /* Now is a good time to look at the implementations of these functions - * before returning to the rest of lguest_init(). */ + /* + * Now is a good time to look at the implementations of these functions + * before returning to the rest of lguest_init(). + */ - /*G:070 Now we've seen all the paravirt_ops, we return to + /*G:070 + * Now we've seen all the paravirt_ops, we return to * lguest_init() where the rest of the fairly chaotic boot setup - * occurs. */ + * occurs. + */ - /* The stack protector is a weird thing where gcc places a canary + /* + * The stack protector is a weird thing where gcc places a canary * value on the stack and then checks it on return. This file is * compiled with -fno-stack-protector it, so we got this far without * problems. The value of the canary is kept at offset 20 from the * %gs register, so we need to set that up before calling C functions - * in other files. */ + * in other files. + */ setup_stack_canary_segment(0); - /* We could just call load_stack_canary_segment(), but we might as - * call switch_to_new_gdt() which loads the whole table and sets up - * the per-cpu segment descriptor register %fs as well. */ + + /* + * We could just call load_stack_canary_segment(), but we might as well + * call switch_to_new_gdt() which loads the whole table and sets up the + * per-cpu segment descriptor register %fs as well. + */ switch_to_new_gdt(0); /* As described in head_32.S, we map the first 128M of memory. */ max_pfn_mapped = (128*1024*1024) >> PAGE_SHIFT; - /* The Host<->Guest Switcher lives at the top of our address space, and + /* + * The Host<->Guest Switcher lives at the top of our address space, and * the Host told us how big it is when we made LGUEST_INIT hypercall: - * it put the answer in lguest_data.reserve_mem */ + * it put the answer in lguest_data.reserve_mem + */ reserve_top_address(lguest_data.reserve_mem); - /* If we don't initialize the lock dependency checker now, it crashes - * paravirt_disable_iospace. */ + /* + * If we don't initialize the lock dependency checker now, it crashes + * paravirt_disable_iospace. + */ lockdep_init(); - /* The IDE code spends about 3 seconds probing for disks: if we reserve + /* + * The IDE code spends about 3 seconds probing for disks: if we reserve * all the I/O ports up front it can't get them and so doesn't probe. * Other device drivers are similar (but less severe). This cuts the - * kernel boot time on my machine from 4.1 seconds to 0.45 seconds. */ + * kernel boot time on my machine from 4.1 seconds to 0.45 seconds. + */ paravirt_disable_iospace(); - /* This is messy CPU setup stuff which the native boot code does before - * start_kernel, so we have to do, too: */ + /* + * This is messy CPU setup stuff which the native boot code does before + * start_kernel, so we have to do, too: + */ cpu_detect(&new_cpu_data); /* head.S usually sets up the first capability word, so do it here. */ new_cpu_data.x86_capability[0] = cpuid_edx(1); @@ -1218,22 +1342,28 @@ __init void lguest_init(void) acpi_ht = 0; #endif - /* We set the preferred console to "hvc". This is the "hypervisor + /* + * We set the preferred console to "hvc". This is the "hypervisor * virtual console" driver written by the PowerPC people, which we also - * adapted for lguest's use. */ + * adapted for lguest's use. + */ add_preferred_console("hvc", 0, NULL); /* Register our very early console. */ virtio_cons_early_init(early_put_chars); - /* Last of all, we set the power management poweroff hook to point to + /* + * Last of all, we set the power management poweroff hook to point to * the Guest routine to power off, and the reboot hook to our restart - * routine. */ + * routine. + */ pm_power_off = lguest_power_off; machine_ops.restart = lguest_restart; - /* Now we're set up, call i386_start_kernel() in head32.c and we proceed - * to boot as normal. It never returns. */ + /* + * Now we're set up, call i386_start_kernel() in head32.c and we proceed + * to boot as normal. It never returns. + */ i386_start_kernel(); } /* diff --git a/arch/x86/lguest/i386_head.S b/arch/x86/lguest/i386_head.S index a9c8cfe..db6aa95 100644 --- a/arch/x86/lguest/i386_head.S +++ b/arch/x86/lguest/i386_head.S @@ -5,7 +5,8 @@ #include <asm/thread_info.h> #include <asm/processor-flags.h> -/*G:020 Our story starts with the kernel booting into startup_32 in +/*G:020 + * Our story starts with the kernel booting into startup_32 in * arch/x86/kernel/head_32.S. It expects a boot header, which is created by * the bootloader (the Launcher in our case). * @@ -21,11 +22,14 @@ * data without remembering to subtract __PAGE_OFFSET! * * The .section line puts this code in .init.text so it will be discarded after - * boot. */ + * boot. + */ .section .init.text, "ax", @progbits ENTRY(lguest_entry) - /* We make the "initialization" hypercall now to tell the Host about - * us, and also find out where it put our page tables. */ + /* + * We make the "initialization" hypercall now to tell the Host about + * us, and also find out where it put our page tables. + */ movl $LHCALL_LGUEST_INIT, %eax movl $lguest_data - __PAGE_OFFSET, %ebx .byte 0x0f,0x01,0xc1 /* KVM_HYPERCALL */ @@ -33,13 +37,14 @@ ENTRY(lguest_entry) /* Set up the initial stack so we can run C code. */ movl $(init_thread_union+THREAD_SIZE),%esp - /* Jumps are relative, and we're running __PAGE_OFFSET too low at the - * moment. */ + /* Jumps are relative: we're running __PAGE_OFFSET too low. */ jmp lguest_init+__PAGE_OFFSET -/*G:055 We create a macro which puts the assembler code between lgstart_ and - * lgend_ markers. These templates are put in the .text section: they can't be - * discarded after boot as we may need to patch modules, too. */ +/*G:055 + * We create a macro which puts the assembler code between lgstart_ and lgend_ + * markers. These templates are put in the .text section: they can't be + * discarded after boot as we may need to patch modules, too. + */ .text #define LGUEST_PATCH(name, insns...) \ lgstart_##name: insns; lgend_##name:; \ @@ -48,58 +53,74 @@ ENTRY(lguest_entry) LGUEST_PATCH(cli, movl $0, lguest_data+LGUEST_DATA_irq_enabled) LGUEST_PATCH(pushf, movl lguest_data+LGUEST_DATA_irq_enabled, %eax) -/*G:033 But using those wrappers is inefficient (we'll see why that doesn't - * matter for save_fl and irq_disable later). If we write our routines - * carefully in assembler, we can avoid clobbering any registers and avoid - * jumping through the wrapper functions. +/*G:033 + * But using those wrappers is inefficient (we'll see why that doesn't matter + * for save_fl and irq_disable later). If we write our routines carefully in + * assembler, we can avoid clobbering any registers and avoid jumping through + * the wrapper functions. * * I skipped over our first piece of assembler, but this one is worth studying - * in a bit more detail so I'll describe in easy stages. First, the routine - * to enable interrupts: */ + * in a bit more detail so I'll describe in easy stages. First, the routine to + * enable interrupts: + */ ENTRY(lg_irq_enable) - /* The reverse of irq_disable, this sets lguest_data.irq_enabled to - * X86_EFLAGS_IF (ie. "Interrupts enabled"). */ + /* + * The reverse of irq_disable, this sets lguest_data.irq_enabled to + * X86_EFLAGS_IF (ie. "Interrupts enabled"). + */ movl $X86_EFLAGS_IF, lguest_data+LGUEST_DATA_irq_enabled - /* But now we need to check if the Host wants to know: there might have + /* + * But now we need to check if the Host wants to know: there might have * been interrupts waiting to be delivered, in which case it will have * set lguest_data.irq_pending to X86_EFLAGS_IF. If it's not zero, we - * jump to send_interrupts, otherwise we're done. */ + * jump to send_interrupts, otherwise we're done. + */ testl $0, lguest_data+LGUEST_DATA_irq_pending jnz send_interrupts - /* One cool thing about x86 is that you can do many things without using + /* + * One cool thing about x86 is that you can do many things without using * a register. In this case, the normal path hasn't needed to save or - * restore any registers at all! */ + * restore any registers at all! + */ ret send_interrupts: - /* OK, now we need a register: eax is used for the hypercall number, + /* + * OK, now we need a register: eax is used for the hypercall number, * which is LHCALL_SEND_INTERRUPTS. * * We used not to bother with this pending detection at all, which was * much simpler. Sooner or later the Host would realize it had to * send us an interrupt. But that turns out to make performance 7 * times worse on a simple tcp benchmark. So now we do this the hard - * way. */ + * way. + */ pushl %eax movl $LHCALL_SEND_INTERRUPTS, %eax - /* This is a vmcall instruction (same thing that KVM uses). Older + /* + * This is a vmcall instruction (same thing that KVM uses). Older * assembler versions might not know the "vmcall" instruction, so we - * create one manually here. */ + * create one manually here. + */ .byte 0x0f,0x01,0xc1 /* KVM_HYPERCALL */ popl %eax ret -/* Finally, the "popf" or "restore flags" routine. The %eax register holds the +/* + * Finally, the "popf" or "restore flags" routine. The %eax register holds the * flags (in practice, either X86_EFLAGS_IF or 0): if it's X86_EFLAGS_IF we're - * enabling interrupts again, if it's 0 we're leaving them off. */ + * enabling interrupts again, if it's 0 we're leaving them off. + */ ENTRY(lg_restore_fl) /* This is just "lguest_data.irq_enabled = flags;" */ movl %eax, lguest_data+LGUEST_DATA_irq_enabled - /* Now, if the %eax value has enabled interrupts and + /* + * Now, if the %eax value has enabled interrupts and * lguest_data.irq_pending is set, we want to tell the Host so it can * deliver any outstanding interrupts. Fortunately, both values will * be X86_EFLAGS_IF (ie. 512) in that case, and the "testl" * instruction will AND them together for us. If both are set, we - * jump to send_interrupts. */ + * jump to send_interrupts. + */ testl lguest_data+LGUEST_DATA_irq_pending, %eax jnz send_interrupts /* Again, the normal path has used no extra registers. Clever, huh? */ @@ -109,22 +130,24 @@ ENTRY(lg_restore_fl) .global lguest_noirq_start .global lguest_noirq_end -/*M:004 When the Host reflects a trap or injects an interrupt into the Guest, - * it sets the eflags interrupt bit on the stack based on - * lguest_data.irq_enabled, so the Guest iret logic does the right thing when - * restoring it. However, when the Host sets the Guest up for direct traps, - * such as system calls, the processor is the one to push eflags onto the - * stack, and the interrupt bit will be 1 (in reality, interrupts are always - * enabled in the Guest). +/*M:004 + * When the Host reflects a trap or injects an interrupt into the Guest, it + * sets the eflags interrupt bit on the stack based on lguest_data.irq_enabled, + * so the Guest iret logic does the right thing when restoring it. However, + * when the Host sets the Guest up for direct traps, such as system calls, the + * processor is the one to push eflags onto the stack, and the interrupt bit + * will be 1 (in reality, interrupts are always enabled in the Guest). * * This turns out to be harmless: the only trap which should happen under Linux * with interrupts disabled is Page Fault (due to our lazy mapping of vmalloc * regions), which has to be reflected through the Host anyway. If another * trap *does* go off when interrupts are disabled, the Guest will panic, and - * we'll never get to this iret! :*/ + * we'll never get to this iret! +:*/ -/*G:045 There is one final paravirt_op that the Guest implements, and glancing - * at it you can see why I left it to last. It's *cool*! It's in *assembler*! +/*G:045 + * There is one final paravirt_op that the Guest implements, and glancing at it + * you can see why I left it to last. It's *cool*! It's in *assembler*! * * The "iret" instruction is used to return from an interrupt or trap. The * stack looks like this: @@ -148,15 +171,18 @@ ENTRY(lg_restore_fl) * return to userspace or wherever. Our solution to this is to surround the * code with lguest_noirq_start: and lguest_noirq_end: labels. We tell the * Host that it is *never* to interrupt us there, even if interrupts seem to be - * enabled. */ + * enabled. + */ ENTRY(lguest_iret) pushl %eax movl 12(%esp), %eax lguest_noirq_start: - /* Note the %ss: segment prefix here. Normal data accesses use the + /* + * Note the %ss: segment prefix here. Normal data accesses use the * "ds" segment, but that will have already been restored for whatever * we're returning to (such as userspace): we can't trust it. The %ss: - * prefix makes sure we use the stack segment, which is still valid. */ + * prefix makes sure we use the stack segment, which is still valid. + */ movl %eax,%ss:lguest_data+LGUEST_DATA_irq_enabled popl %eax iret -- cgit v1.1 From a91d74a3c4de8115295ee87350c13a329164aaaf Mon Sep 17 00:00:00 2001 From: Rusty Russell <rusty@rustcorp.com.au> Date: Thu, 30 Jul 2009 16:03:45 -0600 Subject: lguest: update commentry Every so often, after code shuffles, I need to go through and unbitrot the Lguest Journey (see drivers/lguest/README). Since we now use RCU in a simple form in one place I took the opportunity to expand that explanation. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> --- arch/x86/include/asm/lguest_hcall.h | 8 +-- arch/x86/lguest/boot.c | 99 ++++++++++++++++++++++++++++--------- arch/x86/lguest/i386_head.S | 2 + 3 files changed, 83 insertions(+), 26 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/lguest_hcall.h b/arch/x86/include/asm/lguest_hcall.h index cceb73e..ba0eed8 100644 --- a/arch/x86/include/asm/lguest_hcall.h +++ b/arch/x86/include/asm/lguest_hcall.h @@ -35,10 +35,10 @@ * operations? There are two ways: the direct way is to make a "hypercall", * to make requests of the Host Itself. * - * We use the KVM hypercall mechanism. Seventeen hypercalls are - * available: the hypercall number is put in the %eax register, and the - * arguments (when required) are placed in %ebx, %ecx, %edx and %esi. - * If a return value makes sense, it's returned in %eax. + * We use the KVM hypercall mechanism, though completely different hypercall + * numbers. Seventeen hypercalls are available: the hypercall number is put in + * the %eax register, and the arguments (when required) are placed in %ebx, + * %ecx, %edx and %esi. If a return value makes sense, it's returned in %eax. * * Grossly invalid calls result in Sudden Death at the hands of the vengeful * Host, rather than returning failure. This reflects Winston Churchill's diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c index 025c04d..d677fa9 100644 --- a/arch/x86/lguest/boot.c +++ b/arch/x86/lguest/boot.c @@ -154,6 +154,7 @@ static void lazy_hcall1(unsigned long call, async_hcall(call, arg1, 0, 0, 0); } +/* You can imagine what lazy_hcall2, 3 and 4 look like. :*/ static void lazy_hcall2(unsigned long call, unsigned long arg1, unsigned long arg2) @@ -189,8 +190,10 @@ static void lazy_hcall4(unsigned long call, } #endif -/* When lazy mode is turned off reset the per-cpu lazy mode variable and then - * issue the do-nothing hypercall to flush any stored calls. */ +/*G:036 + * When lazy mode is turned off reset the per-cpu lazy mode variable and then + * issue the do-nothing hypercall to flush any stored calls. +:*/ static void lguest_leave_lazy_mmu_mode(void) { kvm_hypercall0(LHCALL_FLUSH_ASYNC); @@ -250,13 +253,11 @@ extern void lg_irq_enable(void); extern void lg_restore_fl(unsigned long flags); /*M:003 - * Note that we don't check for outstanding interrupts when we re-enable them - * (or when we unmask an interrupt). This seems to work for the moment, since - * interrupts are rare and we'll just get the interrupt on the next timer tick, - * but now we can run with CONFIG_NO_HZ, we should revisit this. One way would - * be to put the "irq_enabled" field in a page by itself, and have the Host - * write-protect it when an interrupt comes in when irqs are disabled. There - * will then be a page fault as soon as interrupts are re-enabled. + * We could be more efficient in our checking of outstanding interrupts, rather + * than using a branch. One way would be to put the "irq_enabled" field in a + * page by itself, and have the Host write-protect it when an interrupt comes + * in when irqs are disabled. There will then be a page fault as soon as + * interrupts are re-enabled. * * A better method is to implement soft interrupt disable generally for x86: * instead of disabling interrupts, we set a flag. If an interrupt does come @@ -568,7 +569,7 @@ static void lguest_write_cr4(unsigned long val) * cr3 ---> +---------+ * | --------->+---------+ * | | | PADDR1 | - * Top-level | | PADDR2 | + * Mid-level | | PADDR2 | * (PMD) page | | | * | | Lower-level | * | | (PTE) page | @@ -588,23 +589,62 @@ static void lguest_write_cr4(unsigned long val) * Index into top Index into second Offset within page * page directory page pagetable page * - * The kernel spends a lot of time changing both the top-level page directory - * and lower-level pagetable pages. The Guest doesn't know physical addresses, - * so while it maintains these page tables exactly like normal, it also needs - * to keep the Host informed whenever it makes a change: the Host will create - * the real page tables based on the Guests'. + * Now, unfortunately, this isn't the whole story: Intel added Physical Address + * Extension (PAE) to allow 32 bit systems to use 64GB of memory (ie. 36 bits). + * These are held in 64-bit page table entries, so we can now only fit 512 + * entries in a page, and the neat three-level tree breaks down. + * + * The result is a four level page table: + * + * cr3 --> [ 4 Upper ] + * [ Level ] + * [ Entries ] + * [(PUD Page)]---> +---------+ + * | --------->+---------+ + * | | | PADDR1 | + * Mid-level | | PADDR2 | + * (PMD) page | | | + * | | Lower-level | + * | | (PTE) page | + * | | | | + * .... .... + * + * + * And the virtual address is decoded as: + * + * 1 1 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 + * |<-2->|<--- 9 bits ---->|<---- 9 bits --->|<------ 12 bits ------>| + * Index into Index into mid Index into lower Offset within page + * top entries directory page pagetable page + * + * It's too hard to switch between these two formats at runtime, so Linux only + * supports one or the other depending on whether CONFIG_X86_PAE is set. Many + * distributions turn it on, and not just for people with silly amounts of + * memory: the larger PTE entries allow room for the NX bit, which lets the + * kernel disable execution of pages and increase security. + * + * This was a problem for lguest, which couldn't run on these distributions; + * then Matias Zabaljauregui figured it all out and implemented it, and only a + * handful of puppies were crushed in the process! + * + * Back to our point: the kernel spends a lot of time changing both the + * top-level page directory and lower-level pagetable pages. The Guest doesn't + * know physical addresses, so while it maintains these page tables exactly + * like normal, it also needs to keep the Host informed whenever it makes a + * change: the Host will create the real page tables based on the Guests'. */ /* - * The Guest calls this to set a second-level entry (pte), ie. to map a page - * into a process' address space. We set the entry then tell the Host the - * toplevel and address this corresponds to. The Guest uses one pagetable per - * process, so we need to tell the Host which one we're changing (mm->pgd). + * The Guest calls this after it has set a second-level entry (pte), ie. to map + * a page into a process' address space. Wetell the Host the toplevel and + * address this corresponds to. The Guest uses one pagetable per process, so + * we need to tell the Host which one we're changing (mm->pgd). */ static void lguest_pte_update(struct mm_struct *mm, unsigned long addr, pte_t *ptep) { #ifdef CONFIG_X86_PAE + /* PAE needs to hand a 64 bit page table entry, so it uses two args. */ lazy_hcall4(LHCALL_SET_PTE, __pa(mm->pgd), addr, ptep->pte_low, ptep->pte_high); #else @@ -612,6 +652,7 @@ static void lguest_pte_update(struct mm_struct *mm, unsigned long addr, #endif } +/* This is the "set and update" combo-meal-deal version. */ static void lguest_set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pteval) { @@ -672,6 +713,11 @@ static void lguest_set_pte(pte_t *ptep, pte_t pteval) } #ifdef CONFIG_X86_PAE +/* + * With 64-bit PTE values, we need to be careful setting them: if we set 32 + * bits at a time, the hardware could see a weird half-set entry. These + * versions ensure we update all 64 bits at once. + */ static void lguest_set_pte_atomic(pte_t *ptep, pte_t pte) { native_set_pte_atomic(ptep, pte); @@ -679,13 +725,14 @@ static void lguest_set_pte_atomic(pte_t *ptep, pte_t pte) lazy_hcall1(LHCALL_FLUSH_TLB, 1); } -void lguest_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) +static void lguest_pte_clear(struct mm_struct *mm, unsigned long addr, + pte_t *ptep) { native_pte_clear(mm, addr, ptep); lguest_pte_update(mm, addr, ptep); } -void lguest_pmd_clear(pmd_t *pmdp) +static void lguest_pmd_clear(pmd_t *pmdp) { lguest_set_pmd(pmdp, __pmd(0)); } @@ -784,6 +831,14 @@ static void __init lguest_init_IRQ(void) irq_ctx_init(smp_processor_id()); } +/* + * With CONFIG_SPARSE_IRQ, interrupt descriptors are allocated as-needed, so + * rather than set them in lguest_init_IRQ we are called here every time an + * lguest device needs an interrupt. + * + * FIXME: irq_to_desc_alloc_node() can fail due to lack of memory, we should + * pass that up! + */ void lguest_setup_irq(unsigned int irq) { irq_to_desc_alloc_node(irq, 0); @@ -1298,7 +1353,7 @@ __init void lguest_init(void) */ switch_to_new_gdt(0); - /* As described in head_32.S, we map the first 128M of memory. */ + /* We actually boot with all memory mapped, but let's say 128MB. */ max_pfn_mapped = (128*1024*1024) >> PAGE_SHIFT; /* diff --git a/arch/x86/lguest/i386_head.S b/arch/x86/lguest/i386_head.S index db6aa95..27eac0f 100644 --- a/arch/x86/lguest/i386_head.S +++ b/arch/x86/lguest/i386_head.S @@ -102,6 +102,7 @@ send_interrupts: * create one manually here. */ .byte 0x0f,0x01,0xc1 /* KVM_HYPERCALL */ + /* Put eax back the way we found it. */ popl %eax ret @@ -125,6 +126,7 @@ ENTRY(lg_restore_fl) jnz send_interrupts /* Again, the normal path has used no extra registers. Clever, huh? */ ret +/*:*/ /* These demark the EIP range where host should never deliver interrupts. */ .global lguest_noirq_start -- cgit v1.1 From 3ef7143d2287b21e09e00a25a8cb4fbdcf0c6c4c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <u.kleine-koenig@pengutronix.de> Date: Wed, 29 Jul 2009 19:31:30 +0100 Subject: ARM: 5627/1: Fix restoring of lr at the end of mcount MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit After ftrace_trace_function is called r1 is probably clobbered so don't try to use its value for restoring. This was introduced in v2.6.29~38^2~7 Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> --- arch/arm/kernel/entry-common.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 366e509..8c3de1a 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -148,7 +148,7 @@ trace: sub r0, r0, #MCOUNT_INSN_SIZE mov lr, pc mov pc, r2 - mov lr, r1 @ restore lr + ldr lr, [fp, #-4] @ restore lr ldmia sp!, {r0-r3, pc} #endif /* CONFIG_DYNAMIC_FTRACE */ -- cgit v1.1 From 320145fac91955ee35a6af7e1c2b42388a17b3d8 Mon Sep 17 00:00:00 2001 From: Yegor Yefremov <yegorslists@googlemail.com> Date: Thu, 9 Jul 2009 08:48:03 +0100 Subject: ARM: 5597/1: [PCI] reset all internal hardware prior PCI initialization Make software reset to avoid freeze if PCI bus was messed up Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> --- arch/arm/mach-ks8695/pci.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-ks8695/pci.c b/arch/arm/mach-ks8695/pci.c index f5ebcc0..7849966 100644 --- a/arch/arm/mach-ks8695/pci.c +++ b/arch/arm/mach-ks8695/pci.c @@ -245,6 +245,9 @@ static int ks8695_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs static void __init ks8695_pci_preinit(void) { + /* make software reset to avoid freeze if PCI bus was messed up */ + __raw_writel(0x80000000, KS8695_PCI_VA + KS8695_PBCS); + /* stage 1 initialization, subid, subdevice = 0x0001 */ __raw_writel(0x00010001, KS8695_PCI_VA + KS8695_CRCSID); -- cgit v1.1 From 165f5f64199f972a21f21effc125d89ed2488e58 Mon Sep 17 00:00:00 2001 From: Peter Korsgaard <jacmet@sunsite.dk> Date: Wed, 1 Jul 2009 17:47:08 +0200 Subject: ARM: S3C: PWM fix for low duty cycle The pwm hardware only checks the compare register after a decrement, so the pin never toggles if tcmp = tcnt. This happens when a very low duty cycle is requested. Fix it by always ensuring that tcmp < tcnt. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Ben Dooks <ben-linux@fluff.org> --- arch/arm/plat-s3c24xx/pwm.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm/plat-s3c24xx/pwm.c b/arch/arm/plat-s3c24xx/pwm.c index 0120b76..82a6d4d 100644 --- a/arch/arm/plat-s3c24xx/pwm.c +++ b/arch/arm/plat-s3c24xx/pwm.c @@ -246,6 +246,10 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns) tcmp = duty_ns / tin_ns; tcmp = tcnt - tcmp; + /* the pwm hw only checks the compare register after a decrement, + so the pin never toggles if tcmp = tcnt */ + if (tcmp == tcnt) + tcmp--; pwm_dbg(pwm, "tin_ns=%lu, tcmp=%ld/%lu\n", tin_ns, tcmp, tcnt); -- cgit v1.1 From bdc6340f4eb68295b1e7c0ade2356b56dca93d93 Mon Sep 17 00:00:00 2001 From: "Pallipadi, Venkatesh" <venkatesh.pallipadi@intel.com> Date: Thu, 30 Jul 2009 14:43:19 -0700 Subject: x86, pat: Fix set_memory_wc related corruption Changeset 3869c4aa18835c8c61b44bd0f3ace36e9d3b5bd0 that went in after 2.6.30-rc1 was a seemingly small change to _set_memory_wc() to make it complaint with SDM requirements. But, introduced a nasty bug, which can result in crash and/or strange corruptions when set_memory_wc is used. One such crash reported here http://lkml.org/lkml/2009/7/30/94 Actually, that changeset introduced two bugs. * change_page_attr_set() takes &addr as first argument and can the addr value might have changed on return, even for single page change_page_attr_set() call. That will make the second change_page_attr_set() in this routine operate on unrelated addr, that can eventually cause strange corruptions and bad page state crash. * The second change_page_attr_set() call, before setting _PAGE_CACHE_WC, should clear the earlier _PAGE_CACHE_UC_MINUS, as otherwise cache attribute will not be WC (will be UC instead). The patch below fixes both these problems. Sending a single patch to fix both the problems, as the change is to the same line of code. The change to have a addr_copy is not very clean. But, it is simpler than making more changes through various routines in pageattr.c. A huge thanks to Jerome for reporting this problem and providing a simple test case that helped us root cause the problem. Reported-by: Jerome Glisse <glisse@freedesktop.org> Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> LKML-Reference: <20090730214319.GA1889@linux-os.sc.intel.com> Acked-by: Dave Airlie <airlied@redhat.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> --- arch/x86/mm/pageattr.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c index 1b734d7..895d90e 100644 --- a/arch/x86/mm/pageattr.c +++ b/arch/x86/mm/pageattr.c @@ -997,12 +997,15 @@ EXPORT_SYMBOL(set_memory_array_uc); int _set_memory_wc(unsigned long addr, int numpages) { int ret; + unsigned long addr_copy = addr; + ret = change_page_attr_set(&addr, numpages, __pgprot(_PAGE_CACHE_UC_MINUS), 0); - if (!ret) { - ret = change_page_attr_set(&addr, numpages, - __pgprot(_PAGE_CACHE_WC), 0); + ret = change_page_attr_set_clr(&addr_copy, numpages, + __pgprot(_PAGE_CACHE_WC), + __pgprot(_PAGE_CACHE_MASK), + 0, 0, NULL); } return ret; } -- cgit v1.1 From ff46a474ca2566d79e8d7454442b56d82bce37c1 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Date: Fri, 31 Jul 2009 15:42:09 +0200 Subject: mx3: Fix double pin allocation in pcm037_eet.c SPI pins are now allocated in pcm037.c, remove them from EET. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> --- arch/arm/mach-mx3/pcm037_eet.c | 9 --------- 1 file changed, 9 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mx3/pcm037_eet.c b/arch/arm/mach-mx3/pcm037_eet.c index fe52fb1..8d38600 100644 --- a/arch/arm/mach-mx3/pcm037_eet.c +++ b/arch/arm/mach-mx3/pcm037_eet.c @@ -24,15 +24,6 @@ #include "devices.h" static unsigned int pcm037_eet_pins[] = { - /* SPI #1 */ - MX31_PIN_CSPI1_MISO__MISO, - MX31_PIN_CSPI1_MOSI__MOSI, - MX31_PIN_CSPI1_SCLK__SCLK, - MX31_PIN_CSPI1_SPI_RDY__SPI_RDY, - MX31_PIN_CSPI1_SS0__SS0, - MX31_PIN_CSPI1_SS1__SS1, - MX31_PIN_CSPI1_SS2__SS2, - /* Reserve and hardwire GPIO 57 high - S6E63D6 chipselect */ IOMUX_MODE(MX31_PIN_KEY_COL7, IOMUX_CONFIG_GPIO), /* GPIO keys */ -- cgit v1.1 From b4f2e2ad5348063ef94aa623f6f09b52ecaf0990 Mon Sep 17 00:00:00 2001 From: John David Anglin <dave.anglin@nrc-cnrc.gc.ca> Date: Sun, 2 Aug 2009 12:34:08 +0200 Subject: parisc: Fix GOT overflow during module load on 64bit kernel Signed-off-by: John David Anglin <dave.anglin@nrc-cnrc.gc.ca> Signed-off-by: Helge Deller <deller@gmx.de> --- arch/parisc/kernel/module.c | 50 ++++++++++++++++++++++++++++++++++++++++----- 1 file changed, 45 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/parisc/kernel/module.c b/arch/parisc/kernel/module.c index ef5caf2..61ee0ee 100644 --- a/arch/parisc/kernel/module.c +++ b/arch/parisc/kernel/module.c @@ -86,8 +86,12 @@ * the bottom of the table, which has a maximum signed displacement of * 0x3fff; however, since we're only going forward, this becomes * 0x1fff, and thus, since each GOT entry is 8 bytes long we can have - * at most 1023 entries */ -#define MAX_GOTS 1023 + * at most 1023 entries. + * To overcome this 14bit displacement with some kernel modules, we'll + * use instead the unusal 16bit displacement method (see reassemble_16a) + * which gives us a maximum positive displacement of 0x7fff, and as such + * allows us to allocate up to 4095 GOT entries. */ +#define MAX_GOTS 4095 /* three functions to determine where in the module core * or init pieces the location is */ @@ -145,12 +149,40 @@ struct stub_entry { /* The reassemble_* functions prepare an immediate value for insertion into an opcode. pa-risc uses all sorts of weird bitfields in the instruction to hold the value. */ +static inline int sign_unext(int x, int len) +{ + int len_ones; + + len_ones = (1 << len) - 1; + return x & len_ones; +} + +static inline int low_sign_unext(int x, int len) +{ + int sign, temp; + + sign = (x >> (len-1)) & 1; + temp = sign_unext(x, len-1); + return (temp << 1) | sign; +} + static inline int reassemble_14(int as14) { return (((as14 & 0x1fff) << 1) | ((as14 & 0x2000) >> 13)); } +static inline int reassemble_16a(int as16) +{ + int s, t; + + /* Unusual 16-bit encoding, for wide mode only. */ + t = (as16 << 1) & 0xffff; + s = (as16 & 0x8000); + return (t ^ s ^ (s >> 1)) | (s >> 15); +} + + static inline int reassemble_17(int as17) { return (((as17 & 0x10000) >> 16) | @@ -407,6 +439,7 @@ static Elf_Addr get_stub(struct module *me, unsigned long value, long addend, enum elf_stub_type stub_type, Elf_Addr loc0, unsigned int targetsec) { struct stub_entry *stub; + int __maybe_unused d; /* initialize stub_offset to point in front of the section */ if (!me->arch.section[targetsec].stub_offset) { @@ -460,12 +493,19 @@ static Elf_Addr get_stub(struct module *me, unsigned long value, long addend, */ switch (stub_type) { case ELF_STUB_GOT: - stub->insns[0] = 0x537b0000; /* ldd 0(%dp),%dp */ + d = get_got(me, value, addend); + if (d <= 15) { + /* Format 5 */ + stub->insns[0] = 0x0f6010db; /* ldd 0(%dp),%dp */ + stub->insns[0] |= low_sign_unext(d, 5) << 16; + } else { + /* Format 3 */ + stub->insns[0] = 0x537b0000; /* ldd 0(%dp),%dp */ + stub->insns[0] |= reassemble_16a(d); + } stub->insns[1] = 0x53610020; /* ldd 10(%dp),%r1 */ stub->insns[2] = 0xe820d000; /* bve (%r1) */ stub->insns[3] = 0x537b0030; /* ldd 18(%dp),%dp */ - - stub->insns[0] |= reassemble_14(get_got(me, value, addend) & 0x3fff); break; case ELF_STUB_MILLI: stub->insns[0] = 0x20200000; /* ldil 0,%r1 */ -- cgit v1.1 From 2678251b207394aa8b9d92c653c05a8b3449f1f5 Mon Sep 17 00:00:00 2001 From: John David Anglin <dave@hiauly1.hia.nrc.ca> Date: Mon, 13 Jul 2009 01:44:37 +0000 Subject: parisc: Set correct bit in protection flags Signed-off-by: John David Anglin <dave@hiauly1.hia.nrc.ca> Signed-off-by: Helge Deller <deller@gmx.de> --- arch/parisc/kernel/entry.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S index ae3e70cd..e552e54 100644 --- a/arch/parisc/kernel/entry.S +++ b/arch/parisc/kernel/entry.S @@ -553,7 +553,7 @@ * on most of those machines only handles cache transactions. */ extrd,u,*= \pte,_PAGE_NO_CACHE_BIT+32,1,%r0 - depi 1,12,1,\prot + depdi 1,12,1,\prot /* Drop prot bits and convert to page addr for iitlbt and idtlbt */ convert_for_tlb_insert20 \pte -- cgit v1.1 From a923c28fc538a4161b15e9b5d7d48248d73d3e6f Mon Sep 17 00:00:00 2001 From: "David S. Miller" <davem@davemloft.net> Date: Sun, 2 Aug 2009 19:17:15 -0700 Subject: sparc: Use page_fault_out_of_memory() for VM_FAULT_OOM. As noted by Nick Piggin. Signed-off-by: David S. Miller <davem@davemloft.net> --- arch/sparc/mm/fault_32.c | 7 ++++--- arch/sparc/mm/fault_64.c | 7 ++++--- 2 files changed, 8 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/sparc/mm/fault_32.c b/arch/sparc/mm/fault_32.c index a5e30c6..b99f81c 100644 --- a/arch/sparc/mm/fault_32.c +++ b/arch/sparc/mm/fault_32.c @@ -319,9 +319,10 @@ no_context: */ out_of_memory: up_read(&mm->mmap_sem); - printk("VM: killing process %s\n", tsk->comm); - if (from_user) - do_group_exit(SIGKILL); + if (from_user) { + pagefault_out_of_memory(); + return; + } goto no_context; do_sigbus: diff --git a/arch/sparc/mm/fault_64.c b/arch/sparc/mm/fault_64.c index e5620b2..43b0da9 100644 --- a/arch/sparc/mm/fault_64.c +++ b/arch/sparc/mm/fault_64.c @@ -447,9 +447,10 @@ handle_kernel_fault: out_of_memory: insn = get_fault_insn(regs, insn); up_read(&mm->mmap_sem); - printk("VM: killing process %s\n", current->comm); - if (!(regs->tstate & TSTATE_PRIV)) - do_group_exit(SIGKILL); + if (!(regs->tstate & TSTATE_PRIV)) { + pagefault_out_of_memory(); + return; + } goto handle_kernel_fault; intr_or_no_mm: -- cgit v1.1 From 1c1a90d866c5fb029099b9f0f40534e01b7c4d91 Mon Sep 17 00:00:00 2001 From: Ralf Baechle <ralf@linux-mips.org> Date: Sun, 5 Jul 2009 19:23:30 +0100 Subject: [PATCH] MIPS: Cavium: Move swapped comments to their rightful place. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/mm/c-octeon.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/mips/mm/c-octeon.c b/arch/mips/mm/c-octeon.c index b165cdc..10ab69f 100644 --- a/arch/mips/mm/c-octeon.c +++ b/arch/mips/mm/c-octeon.c @@ -289,7 +289,7 @@ static void cache_parity_error_octeon(int non_recoverable) } /** - * Called when the the exception is not recoverable + * Called when the the exception is recoverable */ asmlinkage void cache_parity_error_octeon_recoverable(void) @@ -298,7 +298,7 @@ asmlinkage void cache_parity_error_octeon_recoverable(void) } /** - * Called when the the exception is recoverable + * Called when the the exception is not recoverable */ asmlinkage void cache_parity_error_octeon_non_recoverable(void) -- cgit v1.1 From 49316cbf0a9875f102f98dc8b7c80cfa142e33cf Mon Sep 17 00:00:00 2001 From: Ralf Baechle <ralf@linux-mips.org> Date: Mon, 6 Jul 2009 09:13:17 +0100 Subject: MIPS: Eleminate filenames from comments They tend to get not updated when files are moved around or copied and lack any obvious use. While at it zap some only too obvious comments and as per Shinya's suggestion, add a copyright header to extable.c. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> Acked-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> --- arch/mips/dec/ecc-berr.c | 2 -- arch/mips/dec/int-handler.S | 2 -- arch/mips/dec/ioasic-irq.c | 2 -- arch/mips/dec/kn01-berr.c | 2 -- arch/mips/dec/kn02-irq.c | 2 -- arch/mips/dec/kn02xa-berr.c | 2 -- arch/mips/dec/prom/call_o32.S | 2 -- arch/mips/dec/prom/console.c | 2 -- arch/mips/dec/time.c | 2 -- arch/mips/emma/common/Makefile | 3 --- arch/mips/emma/common/prom.c | 3 --- arch/mips/emma/markeins/Makefile | 3 --- arch/mips/emma/markeins/irq.c | 3 --- arch/mips/emma/markeins/led.c | 3 --- arch/mips/emma/markeins/platform.c | 3 --- arch/mips/emma/markeins/setup.c | 3 --- arch/mips/fw/lib/call_o32.S | 2 -- arch/mips/include/asm/emma/emma2rh.h | 3 --- arch/mips/include/asm/emma/markeins.h | 3 --- arch/mips/kernel/irq_txx9.c | 2 -- arch/mips/kernel/proc.c | 2 -- arch/mips/kernel/stacktrace.c | 2 -- arch/mips/mm/extable.c | 6 +++++- arch/mips/pci/fixup-emma2rh.c | 3 --- arch/mips/pci/fixup-sb1250.c | 2 -- arch/mips/pci/ops-emma2rh.c | 3 --- arch/mips/pci/pci-emma2rh.c | 3 --- arch/mips/pci/pci-tx4927.c | 2 -- arch/mips/pci/pci-tx4938.c | 2 -- arch/mips/pci/pci-tx4939.c | 2 -- arch/mips/pmc-sierra/msp71xx/gpio.c | 2 -- arch/mips/pmc-sierra/msp71xx/gpio_extended.c | 2 -- arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c | 2 -- arch/mips/sibyte/swarm/swarm-i2c.c | 2 -- arch/mips/txx9/generic/mem_tx4927.c | 2 -- arch/mips/txx9/generic/setup.c | 2 -- 36 files changed, 5 insertions(+), 83 deletions(-) (limited to 'arch') diff --git a/arch/mips/dec/ecc-berr.c b/arch/mips/dec/ecc-berr.c index 6a17c9b..7abce66 100644 --- a/arch/mips/dec/ecc-berr.c +++ b/arch/mips/dec/ecc-berr.c @@ -1,6 +1,4 @@ /* - * linux/arch/mips/dec/ecc-berr.c - * * Bus error event handling code for systems equipped with ECC * handling logic, i.e. DECstation/DECsystem 5000/200 (KN02), * 5000/240 (KN03), 5000/260 (KN05) and DECsystem 5900 (KN03), diff --git a/arch/mips/dec/int-handler.S b/arch/mips/dec/int-handler.S index 00cecdc..82c85281 100644 --- a/arch/mips/dec/int-handler.S +++ b/arch/mips/dec/int-handler.S @@ -1,6 +1,4 @@ /* - * arch/mips/dec/int-handler.S - * * Copyright (C) 1995, 1996, 1997 Paul M. Antoine and Harald Koerfgen * Copyright (C) 2000, 2001, 2002, 2003, 2005 Maciej W. Rozycki * diff --git a/arch/mips/dec/ioasic-irq.c b/arch/mips/dec/ioasic-irq.c index 3acb133..cb41954 100644 --- a/arch/mips/dec/ioasic-irq.c +++ b/arch/mips/dec/ioasic-irq.c @@ -1,6 +1,4 @@ /* - * linux/arch/mips/dec/ioasic-irq.c - * * DEC I/O ASIC interrupts. * * Copyright (c) 2002, 2003 Maciej W. Rozycki diff --git a/arch/mips/dec/kn01-berr.c b/arch/mips/dec/kn01-berr.c index d3b8002..b0dc6d5 100644 --- a/arch/mips/dec/kn01-berr.c +++ b/arch/mips/dec/kn01-berr.c @@ -1,6 +1,4 @@ /* - * linux/arch/mips/dec/kn01-berr.c - * * Bus error event handling code for DECstation/DECsystem 3100 * and 2100 (KN01) systems equipped with parity error detection * logic. diff --git a/arch/mips/dec/kn02-irq.c b/arch/mips/dec/kn02-irq.c index 02439dc..ed90a8d 100644 --- a/arch/mips/dec/kn02-irq.c +++ b/arch/mips/dec/kn02-irq.c @@ -1,6 +1,4 @@ /* - * linux/arch/mips/dec/kn02-irq.c - * * DECstation 5000/200 (KN02) Control and Status Register * interrupts. * diff --git a/arch/mips/dec/kn02xa-berr.c b/arch/mips/dec/kn02xa-berr.c index 5f04545..07ca540 100644 --- a/arch/mips/dec/kn02xa-berr.c +++ b/arch/mips/dec/kn02xa-berr.c @@ -1,6 +1,4 @@ /* - * linux/arch/mips/dec/kn02xa-berr.c - * * Bus error event handling code for 5000-series systems equipped * with parity error detection logic, i.e. DECstation/DECsystem * 5000/120, /125, /133 (KN02-BA), 5000/150 (KN04-BA) and Personal diff --git a/arch/mips/dec/prom/call_o32.S b/arch/mips/dec/prom/call_o32.S index e523454..8c84981 100644 --- a/arch/mips/dec/prom/call_o32.S +++ b/arch/mips/dec/prom/call_o32.S @@ -1,6 +1,4 @@ /* - * arch/mips/dec/prom/call_o32.S - * * O32 interface for the 64 (or N32) ABI. * * Copyright (C) 2002 Maciej W. Rozycki diff --git a/arch/mips/dec/prom/console.c b/arch/mips/dec/prom/console.c index 078e1a1..caa6e04 100644 --- a/arch/mips/dec/prom/console.c +++ b/arch/mips/dec/prom/console.c @@ -1,6 +1,4 @@ /* - * arch/mips/dec/prom/console.c - * * DECstation PROM-based early console support. * * Copyright (C) 2004, 2007 Maciej W. Rozycki diff --git a/arch/mips/dec/time.c b/arch/mips/dec/time.c index 1359c03..463136e 100644 --- a/arch/mips/dec/time.c +++ b/arch/mips/dec/time.c @@ -1,6 +1,4 @@ /* - * linux/arch/mips/dec/time.c - * * Copyright (C) 1991, 1992, 1995 Linus Torvalds * Copyright (C) 2000, 2003 Maciej W. Rozycki * diff --git a/arch/mips/emma/common/Makefile b/arch/mips/emma/common/Makefile index c392d28..f27d84d 100644 --- a/arch/mips/emma/common/Makefile +++ b/arch/mips/emma/common/Makefile @@ -1,7 +1,4 @@ # -# arch/mips/emma2rh/common/Makefile -# Makefile for the common code of NEC EMMA2RH based board. -# # Copyright (C) NEC Electronics Corporation 2005-2006 # # This program is free software; you can redistribute it and/or modify diff --git a/arch/mips/emma/common/prom.c b/arch/mips/emma/common/prom.c index 120f53f..708f087 100644 --- a/arch/mips/emma/common/prom.c +++ b/arch/mips/emma/common/prom.c @@ -1,7 +1,4 @@ /* - * arch/mips/emma2rh/common/prom.c - * This file is prom file. - * * Copyright (C) NEC Electronics Corporation 2004-2006 * * This file is based on the arch/mips/ddb5xxx/common/prom.c diff --git a/arch/mips/emma/markeins/Makefile b/arch/mips/emma/markeins/Makefile index 16e0017..f8ba250 100644 --- a/arch/mips/emma/markeins/Makefile +++ b/arch/mips/emma/markeins/Makefile @@ -1,7 +1,4 @@ # -# arch/mips/emma2rh/markeins/Makefile -# Makefile for the common code of NEC EMMA2RH based board. -# # Copyright (C) NEC Electronics Corporation 2005-2006 # # This program is free software; you can redistribute it and/or modify diff --git a/arch/mips/emma/markeins/irq.c b/arch/mips/emma/markeins/irq.c index 43828ae..9504b7e 100644 --- a/arch/mips/emma/markeins/irq.c +++ b/arch/mips/emma/markeins/irq.c @@ -1,7 +1,4 @@ /* - * arch/mips/emma2rh/markeins/irq.c - * This file defines the irq handler for EMMA2RH. - * * Copyright (C) NEC Electronics Corporation 2004-2006 * * This file is based on the arch/mips/ddb5xxx/ddb5477/irq.c diff --git a/arch/mips/emma/markeins/led.c b/arch/mips/emma/markeins/led.c index 377a181..4975589 100644 --- a/arch/mips/emma/markeins/led.c +++ b/arch/mips/emma/markeins/led.c @@ -1,7 +1,4 @@ /* - * arch/mips/emma2rh/markeins/led.c - * This file defines the led display for Mark-eins. - * * Copyright (C) NEC Electronics Corporation 2004-2006 * * This program is free software; you can redistribute it and/or modify diff --git a/arch/mips/emma/markeins/platform.c b/arch/mips/emma/markeins/platform.c index 80ae12e..b05b08b 100644 --- a/arch/mips/emma/markeins/platform.c +++ b/arch/mips/emma/markeins/platform.c @@ -1,7 +1,4 @@ /* - * arch/mips/emma2rh/markeins/platofrm.c - * This file sets up platform devices for EMMA2RH Mark-eins. - * * Copyright(C) MontaVista Software Inc, 2006 * * Author: dmitry pervushin <dpervushin@ru.mvista.com> diff --git a/arch/mips/emma/markeins/setup.c b/arch/mips/emma/markeins/setup.c index 67f4565..335dc8c 100644 --- a/arch/mips/emma/markeins/setup.c +++ b/arch/mips/emma/markeins/setup.c @@ -1,7 +1,4 @@ /* - * arch/mips/emma2rh/markeins/setup.c - * This file is setup for EMMA2RH Mark-eins. - * * Copyright (C) NEC Electronics Corporation 2004-2006 * * This file is based on the arch/mips/ddb5xxx/ddb5477/setup.c. diff --git a/arch/mips/fw/lib/call_o32.S b/arch/mips/fw/lib/call_o32.S index bdf7d1d..e0a68713 100644 --- a/arch/mips/fw/lib/call_o32.S +++ b/arch/mips/fw/lib/call_o32.S @@ -1,6 +1,4 @@ /* - * arch/mips/dec/prom/call_o32.S - * * O32 interface for the 64 (or N32) ABI. * * Copyright (C) 2002 Maciej W. Rozycki diff --git a/arch/mips/include/asm/emma/emma2rh.h b/arch/mips/include/asm/emma/emma2rh.h index 30aea91..2afb2fe 100644 --- a/arch/mips/include/asm/emma/emma2rh.h +++ b/arch/mips/include/asm/emma/emma2rh.h @@ -1,7 +1,4 @@ /* - * arch/mips/include/asm/emma/emma2rh.h - * This file is EMMA2RH common header. - * * Copyright (C) NEC Electronics Corporation 2005-2006 * * This file based on include/asm-mips/ddb5xxx/ddb5xxx.h diff --git a/arch/mips/include/asm/emma/markeins.h b/arch/mips/include/asm/emma/markeins.h index 973b062..2618bf2 100644 --- a/arch/mips/include/asm/emma/markeins.h +++ b/arch/mips/include/asm/emma/markeins.h @@ -1,7 +1,4 @@ /* - * include/asm-mips/emma2rh/markeins.h - * This file is EMMA2RH board depended header. - * * Copyright (C) NEC Electronics Corporation 2005-2006 * * This file based on include/asm-mips/ddb5xxx/ddb5xxx.h diff --git a/arch/mips/kernel/irq_txx9.c b/arch/mips/kernel/irq_txx9.c index a4d1462..9b78029 100644 --- a/arch/mips/kernel/irq_txx9.c +++ b/arch/mips/kernel/irq_txx9.c @@ -1,6 +1,4 @@ /* - * linux/arch/mips/kernel/irq_txx9.c - * * Based on linux/arch/mips/jmr3927/rbhma3100/irq.c, * linux/arch/mips/tx4927/common/tx4927_irq.c, * linux/arch/mips/tx4938/common/irq.c diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c index e0a4ac1..26109c4 100644 --- a/arch/mips/kernel/proc.c +++ b/arch/mips/kernel/proc.c @@ -1,6 +1,4 @@ /* - * linux/arch/mips/kernel/proc.c - * * Copyright (C) 1995, 1996, 2001 Ralf Baechle * Copyright (C) 2001, 2004 MIPS Technologies, Inc. * Copyright (C) 2004 Maciej W. Rozycki diff --git a/arch/mips/kernel/stacktrace.c b/arch/mips/kernel/stacktrace.c index 58f5cd7..d52ff77 100644 --- a/arch/mips/kernel/stacktrace.c +++ b/arch/mips/kernel/stacktrace.c @@ -1,6 +1,4 @@ /* - * arch/mips/kernel/stacktrace.c - * * Stack trace management functions * * Copyright (C) 2006 Atsushi Nemoto <anemo@mba.ocn.ne.jp> diff --git a/arch/mips/mm/extable.c b/arch/mips/mm/extable.c index 297fb9f..9d25d2b 100644 --- a/arch/mips/mm/extable.c +++ b/arch/mips/mm/extable.c @@ -1,5 +1,9 @@ /* - * linux/arch/mips/mm/extable.c + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1997, 99, 2001 - 2004 Ralf Baechle <ralf@linux-mips.org> */ #include <linux/module.h> #include <linux/spinlock.h> diff --git a/arch/mips/pci/fixup-emma2rh.c b/arch/mips/pci/fixup-emma2rh.c index fba5aad..0d9ccf4 100644 --- a/arch/mips/pci/fixup-emma2rh.c +++ b/arch/mips/pci/fixup-emma2rh.c @@ -1,7 +1,4 @@ /* - * arch/mips/pci/fixup-emma2rh.c - * This file defines the PCI configration. - * * Copyright (C) NEC Electronics Corporation 2004-2006 * * This file is based on the arch/mips/ddb5xxx/ddb5477/pci.c diff --git a/arch/mips/pci/fixup-sb1250.c b/arch/mips/pci/fixup-sb1250.c index 0ad39e5..f0bb914 100644 --- a/arch/mips/pci/fixup-sb1250.c +++ b/arch/mips/pci/fixup-sb1250.c @@ -1,6 +1,4 @@ /* - * arch/mips/pci/fixup-sb1250.c - * * Copyright (C) 2004, 2006 MIPS Technologies, Inc. All rights reserved. * Author: Maciej W. Rozycki <macro@mips.com> * diff --git a/arch/mips/pci/ops-emma2rh.c b/arch/mips/pci/ops-emma2rh.c index 5947a70..710aef5 100644 --- a/arch/mips/pci/ops-emma2rh.c +++ b/arch/mips/pci/ops-emma2rh.c @@ -1,7 +1,4 @@ /* - * arch/mips/pci/ops-emma2rh.c - * This file defines the PCI operation for EMMA2RH. - * * Copyright (C) NEC Electronics Corporation 2004-2006 * * This file is based on the arch/mips/pci/ops-vr41xx.c diff --git a/arch/mips/pci/pci-emma2rh.c b/arch/mips/pci/pci-emma2rh.c index 2df4190..773e34f 100644 --- a/arch/mips/pci/pci-emma2rh.c +++ b/arch/mips/pci/pci-emma2rh.c @@ -1,7 +1,4 @@ /* - * arch/mips/pci/pci-emma2rh.c - * This file defines the PCI configration. - * * Copyright (C) NEC Electronics Corporation 2004-2006 * * This file is based on the arch/mips/ddb5xxx/ddb5477/pci.c diff --git a/arch/mips/pci/pci-tx4927.c b/arch/mips/pci/pci-tx4927.c index aaa9005..a580740 100644 --- a/arch/mips/pci/pci-tx4927.c +++ b/arch/mips/pci/pci-tx4927.c @@ -1,6 +1,4 @@ /* - * linux/arch/mips/pci/pci-tx4927.c - * * Based on linux/arch/mips/txx9/rbtx4938/setup.c, * and RBTX49xx patch from CELF patch archive. * diff --git a/arch/mips/pci/pci-tx4938.c b/arch/mips/pci/pci-tx4938.c index 1ea257b..20e45f3 100644 --- a/arch/mips/pci/pci-tx4938.c +++ b/arch/mips/pci/pci-tx4938.c @@ -1,6 +1,4 @@ /* - * linux/arch/mips/pci/pci-tx4938.c - * * Based on linux/arch/mips/txx9/rbtx4938/setup.c, * and RBTX49xx patch from CELF patch archive. * diff --git a/arch/mips/pci/pci-tx4939.c b/arch/mips/pci/pci-tx4939.c index 5fecf1c..9ef8406 100644 --- a/arch/mips/pci/pci-tx4939.c +++ b/arch/mips/pci/pci-tx4939.c @@ -1,6 +1,4 @@ /* - * linux/arch/mips/pci/pci-tx4939.c - * * Based on linux/arch/mips/txx9/rbtx4939/setup.c, * and RBTX49xx patch from CELF patch archive. * diff --git a/arch/mips/pmc-sierra/msp71xx/gpio.c b/arch/mips/pmc-sierra/msp71xx/gpio.c index 69848c5..aaccbe5 100644 --- a/arch/mips/pmc-sierra/msp71xx/gpio.c +++ b/arch/mips/pmc-sierra/msp71xx/gpio.c @@ -1,6 +1,4 @@ /* - * @file /arch/mips/pmc-sierra/msp71xx/gpio.c - * * Generic PMC MSP71xx GPIO handling. These base gpio are controlled by two * types of registers. The data register sets the output level when in output * mode and when in input mode will contain the value at the input. The config diff --git a/arch/mips/pmc-sierra/msp71xx/gpio_extended.c b/arch/mips/pmc-sierra/msp71xx/gpio_extended.c index fc6dbc6..2a99f36 100644 --- a/arch/mips/pmc-sierra/msp71xx/gpio_extended.c +++ b/arch/mips/pmc-sierra/msp71xx/gpio_extended.c @@ -1,6 +1,4 @@ /* - * @file /arch/mips/pmc-sierra/msp71xx/gpio_extended.c - * * Generic PMC MSP71xx EXTENDED (EXD) GPIO handling. The extended gpio is * a set of hardware registers that have no need for explicit locking as * it is handled by unique method of writing individual set/clr bits. diff --git a/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c b/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c index caf5e9a..fc990cb 100644 --- a/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c +++ b/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c @@ -1,6 +1,4 @@ /* - * arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c - * * Copyright (C) 2003 PMC-Sierra Inc. * Author: Manish Lachwani (lachwani@pmc-sierra.com) * diff --git a/arch/mips/sibyte/swarm/swarm-i2c.c b/arch/mips/sibyte/swarm/swarm-i2c.c index 4282ac9..0625050 100644 --- a/arch/mips/sibyte/swarm/swarm-i2c.c +++ b/arch/mips/sibyte/swarm/swarm-i2c.c @@ -1,6 +1,4 @@ /* - * arch/mips/sibyte/swarm/swarm-i2c.c - * * Broadcom BCM91250A (SWARM), etc. I2C platform setup. * * Copyright (c) 2008 Maciej W. Rozycki diff --git a/arch/mips/txx9/generic/mem_tx4927.c b/arch/mips/txx9/generic/mem_tx4927.c index ef6ea6e..70f9626 100644 --- a/arch/mips/txx9/generic/mem_tx4927.c +++ b/arch/mips/txx9/generic/mem_tx4927.c @@ -1,6 +1,4 @@ /* - * linux/arch/mips/txx9/generic/mem_tx4927.c - * * common tx4927 memory interface * * Author: MontaVista Software, Inc. diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c index 3b7d77d..a205e2b 100644 --- a/arch/mips/txx9/generic/setup.c +++ b/arch/mips/txx9/generic/setup.c @@ -1,6 +1,4 @@ /* - * linux/arch/mips/txx9/generic/setup.c - * * Based on linux/arch/mips/txx9/rbtx4938/setup.c, * and RBTX49xx patch from CELF patch archive. * -- cgit v1.1 From a887b4dada2f23b2ff2aa725e0509c92dc652597 Mon Sep 17 00:00:00 2001 From: Akinobu Mita <akinobu.mita@gmail.com> Date: Sat, 4 Jul 2009 01:33:09 +0900 Subject: MIPS: Drop mmap_sem in pagefault oom path Fix the pagefault oom path which does not drop mm->mmap_sem. This was introduced by commit c7c1e3846bac1e4b8a8941f6a194812e28b0a519 Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/mm/fault.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/mips/mm/fault.c b/arch/mips/mm/fault.c index 6751ce9..f956ecb 100644 --- a/arch/mips/mm/fault.c +++ b/arch/mips/mm/fault.c @@ -171,6 +171,7 @@ out_of_memory: * We ran out of memory, call the OOM killer, and return the userspace * (which will retry the fault, or kill us if we got oom-killed). */ + up_read(&mm->mmap_sem); pagefault_out_of_memory(); return; -- cgit v1.1 From 7d35cdc07dd26eb6667f66f8e2f43f833a926ecf Mon Sep 17 00:00:00 2001 From: Alexander Clouter <alex@digriz.org.uk> Date: Sun, 5 Jul 2009 12:00:55 +0100 Subject: MIPS: Fix compile for !CONFIG_SMP Commit fc03bc1715ca0ad4ccfe97aab16bcc9e7129c1a4 breaks compiling MIPS with SMP disabled. This patch fixes that. Signed-off-by: Alexander Clouter <alex@digriz.org.uk> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/include/asm/gic.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/include/asm/gic.h b/arch/mips/include/asm/gic.h index 10292e3..a8f5734 100644 --- a/arch/mips/include/asm/gic.h +++ b/arch/mips/include/asm/gic.h @@ -20,7 +20,7 @@ #define GIC_TRIG_EDGE 1 #define GIC_TRIG_LEVEL 0 -#if CONFIG_SMP +#ifdef CONFIG_SMP #define GIC_NUM_INTRS (24 + NR_CPUS * 2) #else #define GIC_NUM_INTRS 32 -- cgit v1.1 From 78fe01a5a80da4621321a1dc199c3a0875e2fbb0 Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa <yuasa@linux-mips.org> Date: Wed, 8 Jul 2009 15:08:19 +0900 Subject: MIPS: MIPSsim: Fix unbalance brace in mipssim get_c0_compare_int() cc1: warnings being treated as errors arch/mips/mipssim/sim_time.c: In function 'get_c0_compare_int': arch/mips/mipssim/sim_time.c:103: warning: ISO C90 forbids mixed declarations and code arch/mips/mipssim/sim_time.c:116: error: expected declaration or statement at end of input make[1]: *** [arch/mips/mipssim/sim_time.o] Error 1 Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/mipssim/sim_time.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/mips/mipssim/sim_time.c b/arch/mips/mipssim/sim_time.c index 0cea932..5492c42 100644 --- a/arch/mips/mipssim/sim_time.c +++ b/arch/mips/mipssim/sim_time.c @@ -89,13 +89,13 @@ unsigned __cpuinit get_c0_compare_int(void) if (cpu_has_veic) { set_vi_handler(MSC01E_INT_CPUCTR, mips_timer_dispatch); mips_cpu_timer_irq = MSC01E_INT_BASE + MSC01E_INT_CPUCTR; - } else { -#endif - { - if (cpu_has_vint) - set_vi_handler(cp0_compare_irq, mips_timer_dispatch); - mips_cpu_timer_irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq; + + return mips_cpu_timer_irq; } +#endif + if (cpu_has_vint) + set_vi_handler(cp0_compare_irq, mips_timer_dispatch); + mips_cpu_timer_irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq; return mips_cpu_timer_irq; } -- cgit v1.1 From 1de010a2702eb21d90883b83bf8c737d5e69d234 Mon Sep 17 00:00:00 2001 From: Huang Weiyi <weiyi.huang@gmail.com> Date: Thu, 9 Jul 2009 06:14:37 +0800 Subject: MIPS: AR7: Remove unused inclusions of <linux/version.h>. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/ar7/platform.c | 1 - arch/mips/ar7/setup.c | 1 - 2 files changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/mips/ar7/platform.c b/arch/mips/ar7/platform.c index 5422449..c4d71fb 100644 --- a/arch/mips/ar7/platform.c +++ b/arch/mips/ar7/platform.c @@ -28,7 +28,6 @@ #include <linux/serial_8250.h> #include <linux/ioport.h> #include <linux/io.h> -#include <linux/version.h> #include <linux/vlynq.h> #include <linux/leds.h> #include <linux/string.h> diff --git a/arch/mips/ar7/setup.c b/arch/mips/ar7/setup.c index 6ebb5f1..39f6b5b 100644 --- a/arch/mips/ar7/setup.c +++ b/arch/mips/ar7/setup.c @@ -15,7 +15,6 @@ * with this program; if not, write to the Free Software Foundation, Inc., * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. */ -#include <linux/version.h> #include <linux/init.h> #include <linux/ioport.h> #include <linux/pm.h> -- cgit v1.1 From 484889fc85a223ef56edc31828b86751b2296b7c Mon Sep 17 00:00:00 2001 From: David Daney <ddaney@caviumnetworks.com> Date: Wed, 8 Jul 2009 10:07:50 -0700 Subject: MIPS: Avoid clobbering struct pt_regs in kthreads The resume() implementation octeon_switch.S examines the saved cp0_status register. We were clobbering the entire pt_regs structure in kernel threads leading to random crashes. When switching away from a kernel thread, the saved cp0_status is examined and if bit 30 is set it is cleared and the CP2 state saved into the pt_regs structure. Since the kernel thread stack overlaid the pt_regs structure this resulted in a corrupt stack. When the kthread with the corrupt stack was resumed, it could crash if it used any of the data in the stack that was clobbered. We fix it by moving the kernel thread stack down so it doesn't overlay pt_regs. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/include/asm/processor.h | 5 +++-- arch/mips/kernel/head.S | 3 ++- arch/mips/kernel/process.c | 4 +++- 3 files changed, 8 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/mips/include/asm/processor.h b/arch/mips/include/asm/processor.h index 0f926aa..087a888 100644 --- a/arch/mips/include/asm/processor.h +++ b/arch/mips/include/asm/processor.h @@ -311,8 +311,9 @@ extern void start_thread(struct pt_regs * regs, unsigned long pc, unsigned long unsigned long get_wchan(struct task_struct *p); -#define __KSTK_TOS(tsk) ((unsigned long)task_stack_page(tsk) + THREAD_SIZE - 32) -#define task_pt_regs(tsk) ((struct pt_regs *)__KSTK_TOS(tsk) - 1) +#define __KSTK_TOS(tsk) ((unsigned long)task_stack_page(tsk) + \ + THREAD_SIZE - 32 - sizeof(struct pt_regs)) +#define task_pt_regs(tsk) ((struct pt_regs *)__KSTK_TOS(tsk)) #define KSTK_EIP(tsk) (task_pt_regs(tsk)->cp0_epc) #define KSTK_ESP(tsk) (task_pt_regs(tsk)->regs[29]) #define KSTK_STATUS(tsk) (task_pt_regs(tsk)->cp0_status) diff --git a/arch/mips/kernel/head.S b/arch/mips/kernel/head.S index 492a0a8..531ce7b 100644 --- a/arch/mips/kernel/head.S +++ b/arch/mips/kernel/head.S @@ -188,7 +188,8 @@ NESTED(kernel_entry, 16, sp) # kernel entry point MTC0 zero, CP0_CONTEXT # clear context register PTR_LA $28, init_thread_union - PTR_LI sp, _THREAD_SIZE - 32 + /* Set the SP after an empty pt_regs. */ + PTR_LI sp, _THREAD_SIZE - 32 - PT_SIZE PTR_ADDU sp, $28 set_saved_sp sp, t0, t1 PTR_SUBU sp, 4 * SZREG # init stack pointer diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c index c09d681..f3d73e1 100644 --- a/arch/mips/kernel/process.c +++ b/arch/mips/kernel/process.c @@ -115,7 +115,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp, { struct thread_info *ti = task_thread_info(p); struct pt_regs *childregs; - long childksp; + unsigned long childksp; p->set_child_tid = p->clear_child_tid = NULL; childksp = (unsigned long)task_stack_page(p) + THREAD_SIZE - 32; @@ -132,6 +132,8 @@ int copy_thread(unsigned long clone_flags, unsigned long usp, /* set up new TSS. */ childregs = (struct pt_regs *) childksp - 1; + /* Put the stack after the struct pt_regs. */ + childksp = (unsigned long) childregs; *childregs = *regs; childregs->regs[7] = 0; /* Clear error flag */ -- cgit v1.1 From 008ee96f1204225503934cb57ac38c49f519c7ab Mon Sep 17 00:00:00 2001 From: Raghu Gandham <raghu@mips.com> Date: Wed, 8 Jul 2009 17:00:44 -0700 Subject: [PATCH] MIPS: SMTC: Fix compile error Commit fc03bc1715ca0ad4ccfe97aab16bcc9e7129c1a4 breaks when SMTC support is enabled on Malta. Signed-off-by: Raghu Gandham <raghu@mips.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/mti-malta/malta-int.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c index a8756f8..3e0a9b3 100644 --- a/arch/mips/mti-malta/malta-int.c +++ b/arch/mips/mti-malta/malta-int.c @@ -331,6 +331,7 @@ static struct irqaction irq_call = { .flags = IRQF_DISABLED|IRQF_PERCPU, .name = "IPI_call" }; +#endif /* CONFIG_MIPS_MT_SMP */ static int gic_resched_int_base; static int gic_call_int_base; @@ -346,7 +347,6 @@ unsigned int plat_ipi_resched_int_xlate(unsigned int cpu) { return GIC_RESCHED_INT(cpu); } -#endif /* CONFIG_MIPS_MT_SMP */ static struct irqaction i8259irq = { .handler = no_action, -- cgit v1.1 From d8e5f9fe5dab0e07985f2456cb6cc57788f53131 Mon Sep 17 00:00:00 2001 From: Kurt Martin <kurt@mips.com> Date: Wed, 8 Jul 2009 19:22:35 -0700 Subject: MIPS: SMTC: Move cross VPE writes to after a TC is assigned to VPE. Signed-off-by: Chris Dearman <chris@mips.com> Signed-off-by: Raghu Gandham <raghu@mips.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/kernel/smtc.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c index 8a0626c..c16bb6d 100644 --- a/arch/mips/kernel/smtc.c +++ b/arch/mips/kernel/smtc.c @@ -465,11 +465,8 @@ void smtc_prepare_cpus(int cpus) smtc_configure_tlb(); for (tc = 0, vpe = 0 ; (vpe < nvpe) && (tc < ntc) ; vpe++) { - /* - * Set the MVP bits. - */ - settc(tc); - write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_MVP); + if (tcpervpe[vpe] == 0) + continue; if (vpe != 0) printk(", "); printk("VPE %d: TC", vpe); @@ -488,6 +485,12 @@ void smtc_prepare_cpus(int cpus) } if (vpe != 0) { /* + * Allow this VPE to control others. + */ + write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | + VPECONF0_MVP); + + /* * Clear any stale software interrupts from VPE's Cause */ write_vpe_c0_cause(0); -- cgit v1.1 From 0e66fff883ef1b6e4c5031e8add8827cd0e2a195 Mon Sep 17 00:00:00 2001 From: Gabor Juhos <juhosg@openwrt.org> Date: Mon, 13 Jul 2009 11:14:24 +0200 Subject: MIPS: Fix loading of modules with unresolved weak symbols Loading of modules with unresolved weak symbols fails on MIPS since '88173507e4fc1e7ecd111b0565e8cba0cb7dae6d'. Modules: handle symbols that have a zero value The module subsystem cannot handle symbols that are zero. If symbols are present that have a zero value then the module resolver prints out a message that these symbols are unresolved. We have to use IS_ERR_VALUE() to check that a symbol has been resolved or not. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/kernel/module.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/module.c b/arch/mips/kernel/module.c index 3e9100d..e465851 100644 --- a/arch/mips/kernel/module.c +++ b/arch/mips/kernel/module.c @@ -301,7 +301,7 @@ int apply_relocate(Elf_Shdr *sechdrs, const char *strtab, /* This is the symbol it is referring to */ sym = (Elf_Sym *)sechdrs[symindex].sh_addr + ELF_MIPS_R_SYM(rel[i]); - if (!sym->st_value) { + if (IS_ERR_VALUE(sym->st_value)) { /* Ignore unresolved weak symbol */ if (ELF_ST_BIND(sym->st_info) == STB_WEAK) continue; @@ -341,7 +341,7 @@ int apply_relocate_add(Elf_Shdr *sechdrs, const char *strtab, /* This is the symbol it is referring to */ sym = (Elf_Sym *)sechdrs[symindex].sh_addr + ELF_MIPS_R_SYM(rel[i]); - if (!sym->st_value) { + if (IS_ERR_VALUE(sym->st_value)) { /* Ignore unresolved weak symbol */ if (ELF_ST_BIND(sym->st_info) == STB_WEAK) continue; -- cgit v1.1 From 4824f20c8b3adcbc5067c1bdd88408ee68da6bb2 Mon Sep 17 00:00:00 2001 From: Florian Fainelli <florian@openwrt.org> Date: Mon, 27 Apr 2009 16:59:48 +0200 Subject: MIPS: MSP71xx: fix build failures on msp_irq_slp.c Trying to build MSP4200 VoIP defconfig also fails on msp_irq_slp.c with a non-existing reference to mask_slp_irq, which is in turn mask_msp_slp_irq. Passed that, we will also miss a comma when calling set_irq_chip_and_handler. This patch fixes both issues. Signed-off-by: Florian Fainelli <florian@openwrt.org> Acked-by: Shane McDonald <mcdonald.shane@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/pmc-sierra/msp71xx/msp_irq_slp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/mips/pmc-sierra/msp71xx/msp_irq_slp.c b/arch/mips/pmc-sierra/msp71xx/msp_irq_slp.c index f5f1b8d..66f6f85 100644 --- a/arch/mips/pmc-sierra/msp71xx/msp_irq_slp.c +++ b/arch/mips/pmc-sierra/msp71xx/msp_irq_slp.c @@ -45,7 +45,7 @@ static inline void mask_msp_slp_irq(unsigned int irq) */ static inline void ack_msp_slp_irq(unsigned int irq) { - mask_slp_irq(irq); + mask_msp_slp_irq(irq); /* * only really necessary for 18, 16-14 and sometimes 3:0 (since @@ -79,7 +79,7 @@ void __init msp_slp_irq_init(void) /* initialize all the IRQ descriptors */ for (i = MSP_SLP_INTBASE; i < MSP_PER_INTBASE + 32; i++) - set_irq_chip_and_handler(i, &msp_slp_irq_controller + set_irq_chip_and_handler(i, &msp_slp_irq_controller, handle_level_irq); } -- cgit v1.1 From 6577890fd68c2671850214663dd9ae97feacbc47 Mon Sep 17 00:00:00 2001 From: Florian Fainelli <florian@openwrt.org> Date: Mon, 27 Apr 2009 16:47:23 +0200 Subject: MIPS: MSPxxxx: define MIPS34K_MISSED_ITLB_WAR for other PMC-Sierra SoC Trying to build a PMC-Sierra MSP4200 VoIP gateway defconfig will not work since MIPS34K_MISSED_ITLB_WAR is not defined for all boards supported within pmc-serria/msp71xx. This patch defines MIPS34K_MISSED_ITLB_WAR to prevent such build failures: CHK include/linux/version.h CHK include/linux/utsrelease.h SYMLINK include/asm -> include/asm-mips CC arch/mips/kernel/asm-offsets.s In file included fromlinux-msp71xx/linux-2.6.29/arch/mips/include/asm/bitops.h:24, from include/linux/bitops.h:17, from include/linux/kernel.h:15, from include/linux/sched.h:52, from arch/mips/kernel/asm-offsets.c:13: linux-msp71xx/linux-2.6.29/arch/mips/include/asm/war.h:241:2: error: #error Check setting of MIPS34K_MISSED_ITLB_WAR for your platform This fixes a compile error when building for the MSP4200 boards. Identical patches to fix this were send by Florian Fainelli <florian@openwrt.org> Shane McDonald <mcdonald.shane@gmail.com> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/include/asm/pmc-sierra/msp71xx/war.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/war.h b/arch/mips/include/asm/pmc-sierra/msp71xx/war.h index 0bf48fc..9e2ee42 100644 --- a/arch/mips/include/asm/pmc-sierra/msp71xx/war.h +++ b/arch/mips/include/asm/pmc-sierra/msp71xx/war.h @@ -23,6 +23,8 @@ #if defined(CONFIG_PMC_MSP7120_EVAL) || defined(CONFIG_PMC_MSP7120_GW) || \ defined(CONFIG_PMC_MSP7120_FPGA) #define MIPS34K_MISSED_ITLB_WAR 1 +#else +#define MIPS34K_MISSED_ITLB_WAR 0 #endif #endif /* __ASM_MIPS_PMC_SIERRA_WAR_H */ -- cgit v1.1 From 0ca71737fee65521ede964afbd2d5484976ed0ed Mon Sep 17 00:00:00 2001 From: Shane McDonald <mcdonald.shane@gmail.com> Date: Sun, 12 Jul 2009 10:42:06 -0600 Subject: MIPS: Simplify and correct interrupt handling for MSP4200 The current interrupt handling code for the MSP4200 always masks an interrupt before acknowledging it. This is not required, as that will be handled by the level interrupt handler. This change simplifies the MSP4200 code to remove the masking in the ack routine, and makes sure that the minimum required operation is performed for masking and acking, rather than always both masking and acking the interrupt. Signed-off-by: Shane McDonald <mcdonald.shane@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/pmc-sierra/msp71xx/msp_irq_slp.c | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/mips/pmc-sierra/msp71xx/msp_irq_slp.c b/arch/mips/pmc-sierra/msp71xx/msp_irq_slp.c index 66f6f85..61f3902 100644 --- a/arch/mips/pmc-sierra/msp71xx/msp_irq_slp.c +++ b/arch/mips/pmc-sierra/msp71xx/msp_irq_slp.c @@ -45,13 +45,6 @@ static inline void mask_msp_slp_irq(unsigned int irq) */ static inline void ack_msp_slp_irq(unsigned int irq) { - mask_msp_slp_irq(irq); - - /* - * only really necessary for 18, 16-14 and sometimes 3:0 (since - * these can be edge sensitive) but it doesn't hurt for the others. - */ - /* check for PER interrupt range */ if (irq < MSP_PER_INTBASE) *SLP_INT_STS_REG = (1 << (irq - MSP_SLP_INTBASE)); @@ -62,8 +55,7 @@ static inline void ack_msp_slp_irq(unsigned int irq) static struct irq_chip msp_slp_irq_controller = { .name = "MSP_SLP", .ack = ack_msp_slp_irq, - .mask = ack_msp_slp_irq, - .mask_ack = ack_msp_slp_irq, + .mask = mask_msp_slp_irq, .unmask = unmask_msp_slp_irq, }; -- cgit v1.1 From 3e6e92183118d26d856e8efb549987164d1b49b4 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Date: Wed, 15 Jul 2009 22:03:56 +0900 Subject: MIPS: RBTX4939: Fix IOC pin-enable register updating The rbtx4939_update_ioc_pen() expects txx9_ce_res[] already initialized. Call it after tx4939_setup(). Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/txx9/rbtx4939/setup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/txx9/rbtx4939/setup.c b/arch/mips/txx9/rbtx4939/setup.c index c033ffe..b0c241e 100644 --- a/arch/mips/txx9/rbtx4939/setup.c +++ b/arch/mips/txx9/rbtx4939/setup.c @@ -512,10 +512,10 @@ static void __init rbtx4939_setup(void) rbtx4939_ebusc_setup(); /* always enable ATA0 */ txx9_set64(&tx4939_ccfgptr->pcfg, TX4939_PCFG_ATA0MODE); - rbtx4939_update_ioc_pen(); if (txx9_master_clock == 0) txx9_master_clock = 20000000; tx4939_setup(); + rbtx4939_update_ioc_pen(); #ifdef HAVE_RBTX4939_IOSWAB ioswabw = rbtx4939_ioswabw; __mem_ioswabw = rbtx4939_mem_ioswabw; -- cgit v1.1 From 838c05705ef8c110037a713526bb18762db0a241 Mon Sep 17 00:00:00 2001 From: David Daney <ddaney@caviumnetworks.com> Date: Tue, 14 Jul 2009 18:16:50 -0700 Subject: MIPS: Octeon PCIe: Make hardware and software bus numbers match. Some SiliconImage PCIe SATA controlers are not detected when the bus numbers differ. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/pci/pcie-octeon.c | 31 +++++++++++++++++-------------- 1 file changed, 17 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/mips/pci/pcie-octeon.c b/arch/mips/pci/pcie-octeon.c index 7526224..6aa5c54 100644 --- a/arch/mips/pci/pcie-octeon.c +++ b/arch/mips/pci/pcie-octeon.c @@ -1040,19 +1040,29 @@ static inline int octeon_pcie_read_config(int pcie_port, struct pci_bus *bus, int bus_number = bus->number; /* - * We need to force the bus number to be zero on the root - * bus. Linux numbers the 2nd root bus to start after all - * buses on root 0. + * For the top level bus make sure our hardware bus number + * matches the software one. */ - if (bus->parent == NULL) - bus_number = 0; + if (bus->parent == NULL) { + union cvmx_pciercx_cfg006 pciercx_cfg006; + pciercx_cfg006.u32 = cvmx_pcie_cfgx_read(pcie_port, + CVMX_PCIERCX_CFG006(pcie_port)); + if (pciercx_cfg006.s.pbnum != bus_number) { + pciercx_cfg006.s.pbnum = bus_number; + pciercx_cfg006.s.sbnum = bus_number; + pciercx_cfg006.s.subbnum = bus_number; + cvmx_pcie_cfgx_write(pcie_port, + CVMX_PCIERCX_CFG006(pcie_port), + pciercx_cfg006.u32); + } + } /* * PCIe only has a single device connected to Octeon. It is * always device ID 0. Don't bother doing reads for other * device IDs on the first segment. */ - if ((bus_number == 0) && (devfn >> 3 != 0)) + if ((bus->parent == NULL) && (devfn >> 3 != 0)) return PCIBIOS_FUNC_NOT_SUPPORTED; /* @@ -1070,7 +1080,7 @@ static inline int octeon_pcie_read_config(int pcie_port, struct pci_bus *bus, * bridge only respondes to device ID 0, function * 0-1 */ - if ((bus_number == 0) && (devfn >= 2)) + if ((bus->parent == NULL) && (devfn >= 2)) return PCIBIOS_FUNC_NOT_SUPPORTED; /* * The PCI-X slots are device ID 2,3. Choose one of @@ -1167,13 +1177,6 @@ static inline int octeon_pcie_write_config(int pcie_port, struct pci_bus *bus, int size, u32 val) { int bus_number = bus->number; - /* - * We need to force the bus number to be zero on the root - * bus. Linux numbers the 2nd root bus to start after all - * busses on root 0. - */ - if (bus->parent == NULL) - bus_number = 0; switch (size) { case 4: -- cgit v1.1 From dd34b5a82feadfaee4f8dea83a694d9349f94a28 Mon Sep 17 00:00:00 2001 From: Florian Fainelli <florian@openwrt.org> Date: Tue, 21 Jul 2009 12:38:10 +0200 Subject: MIPS: AR7: Fix build warning on memory.c This patch fixes the following build warning: arch/mips/ar7/memory.c: In function 'memsize': arch/mips/ar7/memory.c:55: warning: passing argument 1 of 'writel' makes integer from pointer without a cast Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/ar7/memory.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/ar7/memory.c b/arch/mips/ar7/memory.c index 46fed44..696c723 100644 --- a/arch/mips/ar7/memory.c +++ b/arch/mips/ar7/memory.c @@ -52,7 +52,7 @@ static int __init memsize(void) size <<= 1; } while (size < (64 << 20)); - writel(tmpaddr, &addr); + writel((u32)tmpaddr, &addr); return size; } -- cgit v1.1 From ea85a0e4cc870d2bb92e3b2007007901209bb7de Mon Sep 17 00:00:00 2001 From: Roel Kluin <roel.kluin@gmail.com> Date: Wed, 29 Jul 2009 22:02:53 +0200 Subject: MIPS: Fix read buffer overflow Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/ar7/prom.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/ar7/prom.c b/arch/mips/ar7/prom.c index a320bce..5ad6f1d 100644 --- a/arch/mips/ar7/prom.c +++ b/arch/mips/ar7/prom.c @@ -144,7 +144,7 @@ static char * __init lookup_psp_var_map(u8 num) { int i; - for (i = 0; i < sizeof(psp_var_map); i++) + for (i = 0; i < ARRAY_SIZE(psp_var_map); i++) if (psp_var_map[i].num == num) return psp_var_map[i].value; -- cgit v1.1 From 50ca961912be315035cb0f3508e35c974851da2a Mon Sep 17 00:00:00 2001 From: Florian Fainelli <florian@openwrt.org> Date: Fri, 24 Jul 2009 13:24:15 +0200 Subject: MIPS: AR7: Fix build failures when CONFIG_SERIAL_8250 is not enabled This patch fixes the following build failure when CONFIG_SERIAL_8250 is not enabled in the kernel configuration: arch/mips/ar7/built-in.o: In function 'ar7_register_devices': platform.c:(.init.text+0x61c): undefined reference to 'early_serial_setup' platform.c:(.init.text+0x61c): relocation truncated to fit: R_MIPS_26 against 'early_serial_setup' platform.c:(.init.text+0x68c): undefined reference to 'early_serial_setup' platform.c:(.init.text+0x68c): relocation truncated to fit: R_MIPS_26 against 'early_serial_setup' Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/ar7/platform.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/ar7/platform.c b/arch/mips/ar7/platform.c index c4d71fb..8ef8266 100644 --- a/arch/mips/ar7/platform.c +++ b/arch/mips/ar7/platform.c @@ -480,6 +480,7 @@ static void __init detect_leds(void) static int __init ar7_register_devices(void) { int res; +#ifdef CONFIG_SERIAL_8250 static struct uart_port uart_port[2]; memset(uart_port, 0, sizeof(struct uart_port) * 2); @@ -511,7 +512,7 @@ static int __init ar7_register_devices(void) if (res) return res; } - +#endif /* CONFIG_SERIAL_8250 */ res = platform_device_register(&physmap_flash); if (res) return res; -- cgit v1.1 From 8e84c1480d2e7d98d487b567100717b9cc9dcfd7 Mon Sep 17 00:00:00 2001 From: Florian Fainelli <florian@openwrt.org> Date: Fri, 24 Jul 2009 13:18:16 +0200 Subject: MIPS: AR7: Use DMA_BIT_MASK(nn) instead of deprecated DMA_nnBIT_MASK Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/ar7/platform.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/mips/ar7/platform.c b/arch/mips/ar7/platform.c index 8ef8266..2ecab61 100644 --- a/arch/mips/ar7/platform.c +++ b/arch/mips/ar7/platform.c @@ -242,13 +242,13 @@ static struct platform_device physmap_flash = { .num_resources = 1, }; -static u64 cpmac_dma_mask = DMA_32BIT_MASK; +static u64 cpmac_dma_mask = DMA_BIT_MASK(32); static struct platform_device cpmac_low = { .id = 0, .name = "cpmac", .dev = { .dma_mask = &cpmac_dma_mask, - .coherent_dma_mask = DMA_32BIT_MASK, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &cpmac_low_data, }, .resource = cpmac_low_res, @@ -260,7 +260,7 @@ static struct platform_device cpmac_high = { .name = "cpmac", .dev = { .dma_mask = &cpmac_dma_mask, - .coherent_dma_mask = DMA_32BIT_MASK, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &cpmac_high_data, }, .resource = cpmac_high_res, -- cgit v1.1 From e5b3837a52c7fe5c7086590bed902f0fac5f9ec0 Mon Sep 17 00:00:00 2001 From: Florian Fainelli <florian@openwrt.org> Date: Fri, 24 Jul 2009 13:18:42 +0200 Subject: MIPS: AR7: Remove unused tnetd7200_get_clock function Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/ar7/clock.c | 13 ------------- 1 file changed, 13 deletions(-) (limited to 'arch') diff --git a/arch/mips/ar7/clock.c b/arch/mips/ar7/clock.c index 27dc666..cc65c8e 100644 --- a/arch/mips/ar7/clock.c +++ b/arch/mips/ar7/clock.c @@ -264,19 +264,6 @@ static void __init tnetd7300_init_clocks(void) iounmap(bootcr); } -static int tnetd7200_get_clock(int base, struct tnetd7200_clock *clock, - u32 *bootcr, u32 bus_clock) -{ - int divisor = ((readl(&clock->prediv) & 0x1f) + 1) * - ((readl(&clock->postdiv) & 0x1f) + 1); - - if (*bootcr & BOOT_PLL_BYPASS) - return base / divisor; - - return base * ((readl(&clock->mul) & 0xf) + 1) / divisor; -} - - static void tnetd7200_set_clock(int base, struct tnetd7200_clock *clock, int prediv, int postdiv, int postdiv2, int mul, u32 frequency) { -- cgit v1.1 From 619e22632ea3110323b1851a7fecb52bf8505fd2 Mon Sep 17 00:00:00 2001 From: Florian Fainelli <florian@openwrt.org> Date: Fri, 24 Jul 2009 13:19:10 +0200 Subject: MIPS: AR7: Override CFLAGS with -Werror Now that we have removed all warnings from the ar7 board code we can use -Werror like on other MIPS boards. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/ar7/Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/mips/ar7/Makefile b/arch/mips/ar7/Makefile index 7435e44..26bc5da 100644 --- a/arch/mips/ar7/Makefile +++ b/arch/mips/ar7/Makefile @@ -8,3 +8,4 @@ obj-y := \ platform.o \ gpio.o \ clock.o +EXTRA_CFLAGS += -Werror -- cgit v1.1 From a1b021d3992d9be03b0abec1a7ed78e713b94206 Mon Sep 17 00:00:00 2001 From: Florian Fainelli <florian@openwrt.org> Date: Sat, 1 Aug 2009 23:51:20 +0200 Subject: MIPS: MTX-1: Request button GPIO before setting its direction This patch fixes the following warning at boot time: WARNING: at drivers/gpio/gpiolib.c:83 0x8021d5e0() autorequest GPIO-207 Modules linked in: Call Trace:[<8011e0ec>] 0x8011e0ec [<80110a28>] 0x80110a28 [<80110a28>] 0x80110a28 [..snip..] The current code does not request the GPIO and attempts to set its direction, which is a violation of the GPIO API. This patch also unhardcode the GPIO we request and use the one we defined in the button driver. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/alchemy/mtx-1/platform.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/mips/alchemy/mtx-1/platform.c b/arch/mips/alchemy/mtx-1/platform.c index 8b5914d..e30e42a 100644 --- a/arch/mips/alchemy/mtx-1/platform.c +++ b/arch/mips/alchemy/mtx-1/platform.c @@ -1,7 +1,7 @@ /* * MTX-1 platform devices registration * - * Copyright (C) 2007, Florian Fainelli <florian@openwrt.org> + * Copyright (C) 2007-2009, Florian Fainelli <florian@openwrt.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -142,7 +142,17 @@ static struct __initdata platform_device * mtx1_devs[] = { static int __init mtx1_register_devices(void) { - gpio_direction_input(207); + int rc; + + rc = gpio_request(mtx1_gpio_button[0].gpio, + mtx1_gpio_button[0].desc); + if (rc < 0) { + printk(KERN_INFO "mtx1: failed to request %d\n", + mtx1_gpio_button[0].gpio); + goto out; + } + gpio_direction_input(mtx1_gpio_button[0].gpio); +out: return platform_add_devices(mtx1_devs, ARRAY_SIZE(mtx1_devs)); } -- cgit v1.1 From 64f1815507f207ec54ee6b9ae69c48bd153e83b4 Mon Sep 17 00:00:00 2001 From: Julia Lawall <julia@diku.dk> Date: Sun, 2 Aug 2009 10:48:08 +0200 Subject: MIPS: Use DIV_ROUND_CLOSEST The kernel.h macro DIV_ROUND_CLOSEST performs the computation (x + d/2)/d but is perhaps more readable. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @haskernel@ @@ #include <linux/kernel.h> @depends on haskernel@ expression x,__divisor; @@ - (((x) + ((__divisor) / 2)) / (__divisor)) + DIV_ROUND_CLOSEST(x,__divisor) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/nxp/pnx8550/common/time.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/nxp/pnx8550/common/time.c b/arch/mips/nxp/pnx8550/common/time.c index 8df43e9..18b1927 100644 --- a/arch/mips/nxp/pnx8550/common/time.c +++ b/arch/mips/nxp/pnx8550/common/time.c @@ -138,7 +138,7 @@ __init void plat_time_init(void) * HZ timer interrupts per second. */ mips_hpt_frequency = 27UL * ((1000000UL * n)/(m * pow2p)); - cpj = (mips_hpt_frequency + HZ / 2) / HZ; + cpj = DIV_ROUND_CLOSEST(mips_hpt_frequency, HZ); write_c0_count(0); timer_ack(); -- cgit v1.1 From 3d4656d68bad84604f5b01f93e066cd02f77154b Mon Sep 17 00:00:00 2001 From: Roel Kluin <roel.kluin@gmail.com> Date: Fri, 31 Jul 2009 14:52:51 +0200 Subject: MIPS: Jazz: Fix read buffer overflow Check whether index is within bounds before testing the element. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/jazz/jazzdma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/jazz/jazzdma.c b/arch/mips/jazz/jazzdma.c index f0fd636..0d64d0f 100644 --- a/arch/mips/jazz/jazzdma.c +++ b/arch/mips/jazz/jazzdma.c @@ -190,7 +190,7 @@ int vdma_free(unsigned long laddr) return -1; } - while (pgtbl[i].owner == laddr && i < VDMA_PGTBL_ENTRIES) { + while (i < VDMA_PGTBL_ENTRIES && pgtbl[i].owner == laddr) { pgtbl[i].owner = VDMA_PAGE_EMPTY; i++; } -- cgit v1.1 From 39b3d44624e9c54e7406274beaf569fe33af2b96 Mon Sep 17 00:00:00 2001 From: David Daney <ddaney@caviumnetworks.com> Date: Fri, 31 Jul 2009 14:30:07 -0700 Subject: MIPS: Octeon: Run IPI code with interrupts disabled. In mm/slab.c the function do_ccupdate_local requires that interrupts be disabled. If they are not, we panic with CONFIG_DEBUG_SLAB. So we disable interrupts while processing IPIs. Also these are not shared irqs, so get rid of the IRQF_SHARED flag. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/cavium-octeon/smp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/mips/cavium-octeon/smp.c b/arch/mips/cavium-octeon/smp.c index 0b891a9..32d51a31 100644 --- a/arch/mips/cavium-octeon/smp.c +++ b/arch/mips/cavium-octeon/smp.c @@ -194,11 +194,11 @@ static void octeon_init_secondary(void) void octeon_prepare_cpus(unsigned int max_cpus) { cvmx_write_csr(CVMX_CIU_MBOX_CLRX(cvmx_get_core_num()), 0xffffffff); - if (request_irq(OCTEON_IRQ_MBOX0, mailbox_interrupt, IRQF_SHARED, + if (request_irq(OCTEON_IRQ_MBOX0, mailbox_interrupt, IRQF_DISABLED, "mailbox0", mailbox_interrupt)) { panic("Cannot request_irq(OCTEON_IRQ_MBOX0)\n"); } - if (request_irq(OCTEON_IRQ_MBOX1, mailbox_interrupt, IRQF_SHARED, + if (request_irq(OCTEON_IRQ_MBOX1, mailbox_interrupt, IRQF_DISABLED, "mailbox1", mailbox_interrupt)) { panic("Cannot request_irq(OCTEON_IRQ_MBOX1)\n"); } -- cgit v1.1 From 6f9fdeb6761a46ded6bf4b799993a3f235ab853d Mon Sep 17 00:00:00 2001 From: Ralf Baechle <ralf@linux-mips.org> Date: Mon, 3 Aug 2009 10:50:19 +0100 Subject: MIPS: Module: Make error messages unique. There were three different errors resulting in a "dangerous relocation" message. Add the relocation type to the messgages to make them more useful. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/kernel/module.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/module.c b/arch/mips/kernel/module.c index e465851..6f51dda 100644 --- a/arch/mips/kernel/module.c +++ b/arch/mips/kernel/module.c @@ -98,7 +98,8 @@ static int apply_r_mips_32_rela(struct module *me, u32 *location, Elf_Addr v) static int apply_r_mips_26_rel(struct module *me, u32 *location, Elf_Addr v) { if (v % 4) { - printk(KERN_ERR "module %s: dangerous relocation\n", me->name); + pr_err("module %s: dangerous R_MIPS_26 REL relocation\n", + me->name); return -ENOEXEC; } @@ -118,7 +119,8 @@ static int apply_r_mips_26_rel(struct module *me, u32 *location, Elf_Addr v) static int apply_r_mips_26_rela(struct module *me, u32 *location, Elf_Addr v) { if (v % 4) { - printk(KERN_ERR "module %s: dangerous relocation\n", me->name); + pr_err("module %s: dangerous R_MIPS_26 RELArelocation\n", + me->name); return -ENOEXEC; } @@ -222,7 +224,7 @@ static int apply_r_mips_lo16_rel(struct module *me, u32 *location, Elf_Addr v) return 0; out_danger: - printk(KERN_ERR "module %s: dangerous " "relocation\n", me->name); + pr_err("module %s: dangerous R_MIPS_LO16 REL relocation\n", me->name); return -ENOEXEC; } -- cgit v1.1 From e2a9cf96a0af24f33206b4bb98cc3a12242260c1 Mon Sep 17 00:00:00 2001 From: Raghu Gandham <raghu@mips.com> Date: Fri, 10 Jul 2009 02:01:32 -0700 Subject: MIPS: VPE: Fix compiler warning. Signed-off-by: Raghu Gandham <raghu@mips.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/kernel/vpe.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c index 07b9ec2..3d4ef84 100644 --- a/arch/mips/kernel/vpe.c +++ b/arch/mips/kernel/vpe.c @@ -327,7 +327,8 @@ static void layout_sections(struct module *mod, const Elf_Ehdr * hdr, || (s->sh_flags & masks[m][1]) || s->sh_entsize != ~0UL) continue; - s->sh_entsize = get_offset(&mod->core_size, s); + s->sh_entsize = + get_offset((unsigned long *)&mod->core_size, s); } if (m == 0) -- cgit v1.1 From 477c4b07406357ad93d0e32788dbf3ee814eadaa Mon Sep 17 00:00:00 2001 From: Ralf Baechle <ralf@linux-mips.org> Date: Mon, 3 Aug 2009 12:26:40 +0100 Subject: MIPS: VPE: Free relocation chain on error. This may happen if a bad sequence of relocations is being encountered. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/kernel/vpe.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c index 3d4ef84..245b03e 100644 --- a/arch/mips/kernel/vpe.c +++ b/arch/mips/kernel/vpe.c @@ -462,16 +462,15 @@ static int apply_r_mips_lo16(struct module *me, uint32_t *location, { unsigned long insnlo = *location; Elf32_Addr val, vallo; + struct mips_hi16 *l, *next; /* Sign extend the addend we extract from the lo insn. */ vallo = ((insnlo & 0xffff) ^ 0x8000) - 0x8000; if (mips_hi16_list != NULL) { - struct mips_hi16 *l; l = mips_hi16_list; while (l != NULL) { - struct mips_hi16 *next; unsigned long insn; /* @@ -481,7 +480,7 @@ static int apply_r_mips_lo16(struct module *me, uint32_t *location, printk(KERN_DEBUG "VPE loader: " "apply_r_mips_lo16/hi16: \t" "inconsistent value information\n"); - return -ENOEXEC; + goto out_free; } /* @@ -519,6 +518,16 @@ static int apply_r_mips_lo16(struct module *me, uint32_t *location, *location = insnlo; return 0; + +out_free: + while (l != NULL) { + next = l->next; + kfree(l); + l = next; + } + mips_hi16_list = NULL; + + return -ENOEXEC; } static int (*reloc_handlers[]) (struct module *me, uint32_t *location, -- cgit v1.1 From f18b51cc1f97ca290256e8f94127f6856a42d605 Mon Sep 17 00:00:00 2001 From: Ralf Baechle <ralf@linux-mips.org> Date: Mon, 3 Aug 2009 12:54:35 +0100 Subject: MIPS: VPE: Make various functions static. None of these is used outside the VPE loader. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/kernel/vpe.c | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c index 245b03e..6cbeb2a 100644 --- a/arch/mips/kernel/vpe.c +++ b/arch/mips/kernel/vpe.c @@ -155,10 +155,9 @@ struct { }; static void release_progmem(void *ptr); -extern void save_gp_address(unsigned int secbase, unsigned int rel); /* get the vpe associated with this minor */ -struct vpe *get_vpe(int minor) +static struct vpe *get_vpe(int minor) { struct vpe *v; @@ -174,7 +173,7 @@ struct vpe *get_vpe(int minor) } /* get the vpe associated with this minor */ -struct tc *get_tc(int index) +static struct tc *get_tc(int index) { struct tc *t; @@ -199,7 +198,7 @@ struct tc *get_tc_unused(void) } /* allocate a vpe and associate it with this minor (or index) */ -struct vpe *alloc_vpe(int minor) +static struct vpe *alloc_vpe(int minor) { struct vpe *v; @@ -216,7 +215,7 @@ struct vpe *alloc_vpe(int minor) } /* allocate a tc. At startup only tc0 is running, all other can be halted. */ -struct tc *alloc_tc(int index) +static struct tc *alloc_tc(int index) { struct tc *tc; @@ -232,7 +231,7 @@ out: } /* clean up and free everything */ -void release_vpe(struct vpe *v) +static void release_vpe(struct vpe *v) { list_del(&v->list); if (v->load_addr) @@ -240,7 +239,7 @@ void release_vpe(struct vpe *v) kfree(v); } -void dump_mtregs(void) +static void dump_mtregs(void) { unsigned long val; @@ -551,7 +550,7 @@ static char *rstrs[] = { [R_MIPS_PC16] = "MIPS_PC16" }; -int apply_relocations(Elf32_Shdr *sechdrs, +static int apply_relocations(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, unsigned int relsec, @@ -596,7 +595,7 @@ int apply_relocations(Elf32_Shdr *sechdrs, return 0; } -void save_gp_address(unsigned int secbase, unsigned int rel) +static inline void save_gp_address(unsigned int secbase, unsigned int rel) { gp_addr = secbase + rel; gp_offs = gp_addr - (secbase & 0xffff0000); -- cgit v1.1 From 349c4229ed305146a558008d393c622d715cd11d Mon Sep 17 00:00:00 2001 From: Ralf Baechle <ralf@linux-mips.org> Date: Mon, 3 Aug 2009 12:56:39 +0100 Subject: MIPS: VPE: Fix bogus indentation. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/kernel/vpe.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c index 6cbeb2a..e368752 100644 --- a/arch/mips/kernel/vpe.c +++ b/arch/mips/kernel/vpe.c @@ -73,7 +73,7 @@ static int major; static const int minor = 1; /* fixed for now */ #ifdef CONFIG_MIPS_APSP_KSPD - static struct kspd_notifications kspd_events; +static struct kspd_notifications kspd_events; static int kspd_events_reqd = 0; #endif -- cgit v1.1 From ce21f4e86f89d352efecd044958db1917033b49b Mon Sep 17 00:00:00 2001 From: Ralf Baechle <ralf@linux-mips.org> Date: Mon, 3 Aug 2009 12:57:52 +0100 Subject: MIPS: VPE: Delete unused function get_tc_unused(). Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/kernel/vpe.c | 12 ------------ 1 file changed, 12 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c index e368752..9a1ab7e 100644 --- a/arch/mips/kernel/vpe.c +++ b/arch/mips/kernel/vpe.c @@ -185,18 +185,6 @@ static struct tc *get_tc(int index) return NULL; } -struct tc *get_tc_unused(void) -{ - struct tc *t; - - list_for_each_entry(t, &vpecontrol.tc_list, list) { - if (t->state == TC_STATE_UNUSED) - return t; - } - - return NULL; -} - /* allocate a vpe and associate it with this minor (or index) */ static struct vpe *alloc_vpe(int minor) { -- cgit v1.1 From 54822de7793bf9aa56d79cc173281cdb23b37f9f Mon Sep 17 00:00:00 2001 From: Ralf Baechle <ralf@linux-mips.org> Date: Mon, 3 Aug 2009 17:27:19 +0100 Subject: MIPS: Wire up accept4 syscall. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/include/asm/unistd.h | 15 +++++++++------ arch/mips/kernel/scall32-o32.S | 1 + arch/mips/kernel/scall64-64.S | 1 + arch/mips/kernel/scall64-n32.S | 1 + arch/mips/kernel/scall64-o32.S | 1 + 5 files changed, 13 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/mips/include/asm/unistd.h b/arch/mips/include/asm/unistd.h index b70c49f..e753a77 100644 --- a/arch/mips/include/asm/unistd.h +++ b/arch/mips/include/asm/unistd.h @@ -354,16 +354,17 @@ #define __NR_pwritev (__NR_Linux + 331) #define __NR_rt_tgsigqueueinfo (__NR_Linux + 332) #define __NR_perf_counter_open (__NR_Linux + 333) +#define __NR_accept4 (__NR_Linux + 334) /* * Offset of the last Linux o32 flavoured syscall */ -#define __NR_Linux_syscalls 333 +#define __NR_Linux_syscalls 334 #endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */ #define __NR_O32_Linux 4000 -#define __NR_O32_Linux_syscalls 333 +#define __NR_O32_Linux_syscalls 334 #if _MIPS_SIM == _MIPS_SIM_ABI64 @@ -664,16 +665,17 @@ #define __NR_pwritev (__NR_Linux + 290) #define __NR_rt_tgsigqueueinfo (__NR_Linux + 291) #define __NR_perf_counter_open (__NR_Linux + 292) +#define __NR_accept4 (__NR_Linux + 293) /* * Offset of the last Linux 64-bit flavoured syscall */ -#define __NR_Linux_syscalls 292 +#define __NR_Linux_syscalls 293 #endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */ #define __NR_64_Linux 5000 -#define __NR_64_Linux_syscalls 292 +#define __NR_64_Linux_syscalls 293 #if _MIPS_SIM == _MIPS_SIM_NABI32 @@ -978,16 +980,17 @@ #define __NR_pwritev (__NR_Linux + 294) #define __NR_rt_tgsigqueueinfo (__NR_Linux + 295) #define __NR_perf_counter_open (__NR_Linux + 296) +#define __NR_accept4 (__NR_Linux + 297) /* * Offset of the last N32 flavoured syscall */ -#define __NR_Linux_syscalls 296 +#define __NR_Linux_syscalls 297 #endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */ #define __NR_N32_Linux 6000 -#define __NR_N32_Linux_syscalls 296 +#define __NR_N32_Linux_syscalls 297 #ifdef __KERNEL__ diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S index 20a86e0..b570821 100644 --- a/arch/mips/kernel/scall32-o32.S +++ b/arch/mips/kernel/scall32-o32.S @@ -654,6 +654,7 @@ einval: li v0, -ENOSYS sys sys_pwritev 6 sys sys_rt_tgsigqueueinfo 4 sys sys_perf_counter_open 5 + sys sys_accept4 4 .endm /* We pre-compute the number of _instruction_ bytes needed to diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S index b046130..3d866f2 100644 --- a/arch/mips/kernel/scall64-64.S +++ b/arch/mips/kernel/scall64-64.S @@ -491,4 +491,5 @@ sys_call_table: PTR sys_pwritev /* 5390 */ PTR sys_rt_tgsigqueueinfo PTR sys_perf_counter_open + PTR sys_accept4 .size sys_call_table,.-sys_call_table diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S index 15874f9..e855b11 100644 --- a/arch/mips/kernel/scall64-n32.S +++ b/arch/mips/kernel/scall64-n32.S @@ -417,4 +417,5 @@ EXPORT(sysn32_call_table) PTR sys_pwritev PTR compat_sys_rt_tgsigqueueinfo /* 5295 */ PTR sys_perf_counter_open + PTR sys_accept4 .size sysn32_call_table,.-sysn32_call_table diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index 781e0f1..0c49f1a 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -537,4 +537,5 @@ sys_call_table: PTR compat_sys_pwritev PTR compat_sys_rt_tgsigqueueinfo PTR sys_perf_counter_open + PTR sys_accept4 .size sys_call_table,.-sys_call_table -- cgit v1.1 From 8523acfe40efc1a8d3da8f473ca67cb195b06f0c Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom <thellstrom@vmware.com> Date: Mon, 3 Aug 2009 09:25:45 +0200 Subject: x86: Fix CPA memtype reserving in the set_pages_array*() cases The code was incorrectly reserving memtypes using the page virtual address instead of the physical address. Furthermore, the code was not ignoring highmem pages as it ought to. ( upstream does not pass in highmem pages yet - but upcoming graphics code will do it and there's no reason to not handle this properly in the CPA APIs.) Fixes: http://bugzilla.kernel.org/show_bug.cgi?id=13884 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Acked-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: <stable@kernel.org> Cc: dri-devel@lists.sourceforge.net Cc: venkatesh.pallipadi@intel.com LKML-Reference: <1249284345-7654-1-git-send-email-thellstrom@vmware.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/mm/pageattr.c | 30 +++++++++++++++++++++--------- 1 file changed, 21 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c index 895d90e..7e600c1 100644 --- a/arch/x86/mm/pageattr.c +++ b/arch/x86/mm/pageattr.c @@ -591,9 +591,12 @@ static int __change_page_attr(struct cpa_data *cpa, int primary) unsigned int level; pte_t *kpte, old_pte; - if (cpa->flags & CPA_PAGES_ARRAY) - address = (unsigned long)page_address(cpa->pages[cpa->curpage]); - else if (cpa->flags & CPA_ARRAY) + if (cpa->flags & CPA_PAGES_ARRAY) { + struct page *page = cpa->pages[cpa->curpage]; + if (unlikely(PageHighMem(page))) + return 0; + address = (unsigned long)page_address(page); + } else if (cpa->flags & CPA_ARRAY) address = cpa->vaddr[cpa->curpage]; else address = *cpa->vaddr; @@ -697,9 +700,12 @@ static int cpa_process_alias(struct cpa_data *cpa) * No need to redo, when the primary call touched the direct * mapping already: */ - if (cpa->flags & CPA_PAGES_ARRAY) - vaddr = (unsigned long)page_address(cpa->pages[cpa->curpage]); - else if (cpa->flags & CPA_ARRAY) + if (cpa->flags & CPA_PAGES_ARRAY) { + struct page *page = cpa->pages[cpa->curpage]; + if (unlikely(PageHighMem(page))) + return 0; + vaddr = (unsigned long)page_address(page); + } else if (cpa->flags & CPA_ARRAY) vaddr = cpa->vaddr[cpa->curpage]; else vaddr = *cpa->vaddr; @@ -1122,7 +1128,9 @@ int set_pages_array_uc(struct page **pages, int addrinarray) int free_idx; for (i = 0; i < addrinarray; i++) { - start = (unsigned long)page_address(pages[i]); + if (PageHighMem(pages[i])) + continue; + start = page_to_pfn(pages[i]) << PAGE_SHIFT; end = start + PAGE_SIZE; if (reserve_memtype(start, end, _PAGE_CACHE_UC_MINUS, NULL)) goto err_out; @@ -1135,7 +1143,9 @@ int set_pages_array_uc(struct page **pages, int addrinarray) err_out: free_idx = i; for (i = 0; i < free_idx; i++) { - start = (unsigned long)page_address(pages[i]); + if (PageHighMem(pages[i])) + continue; + start = page_to_pfn(pages[i]) << PAGE_SHIFT; end = start + PAGE_SIZE; free_memtype(start, end); } @@ -1164,7 +1174,9 @@ int set_pages_array_wb(struct page **pages, int addrinarray) return retval; for (i = 0; i < addrinarray; i++) { - start = (unsigned long)page_address(pages[i]); + if (PageHighMem(pages[i])) + continue; + start = page_to_pfn(pages[i]) << PAGE_SHIFT; end = start + PAGE_SIZE; free_memtype(start, end); } -- cgit v1.1 From 6c6c51e4cc11a5456fb1172008f7c69d955af9f6 Mon Sep 17 00:00:00 2001 From: Paul Mackerras <paulus@samba.org> Date: Mon, 3 Aug 2009 22:47:32 +1000 Subject: x86: Add quirk to make Apple MacBook5,2 use reboot=pci The latest Apple MacBook (MacBook5,2) doesn't reboot successfully under Linux; neither the EFI reboot method nor the default method using the keyboard controller works (the system just hangs and doesn't reset). However, the method using the "PCI reset register" at 0xcf9 does work. This adds a quirk to detect this machine via DMI and force the reboot_type to BOOT_CF9. With this it reboots successfully without requiring a command-line option. Note that the EFI code forces reboot_type to BOOT_EFI when the machine is booted via EFI, but this overrides that since the core_initcall runs after the EFI initialization code. Signed-off-by: Paul Mackerras <paulus@samba.org> LKML-Reference: <19062.56420.501516.316181@cargo.ozlabs.ibm.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> --- arch/x86/kernel/reboot.c | 34 +++++++++++++++++++++++++++++++++- 1 file changed, 33 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index 508e982..834c9da 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -3,6 +3,7 @@ #include <linux/init.h> #include <linux/pm.h> #include <linux/efi.h> +#include <linux/dmi.h> #include <acpi/reboot.h> #include <asm/io.h> #include <asm/apic.h> @@ -17,7 +18,6 @@ #include <asm/cpu.h> #ifdef CONFIG_X86_32 -# include <linux/dmi.h> # include <linux/ctype.h> # include <linux/mc146818rtc.h> #else @@ -404,6 +404,38 @@ EXPORT_SYMBOL(machine_real_restart); #endif /* CONFIG_X86_32 */ +/* + * Apple MacBook5,2 (2009 MacBook) needs reboot=p + */ +static int __init set_pci_reboot(const struct dmi_system_id *d) +{ + if (reboot_type != BOOT_CF9) { + reboot_type = BOOT_CF9; + printk(KERN_INFO "%s series board detected. " + "Selecting PCI-method for reboots.\n", d->ident); + } + return 0; +} + +static struct dmi_system_id __initdata pci_reboot_dmi_table[] = { + { /* Handle problems with rebooting on Apple MacBook5,2 */ + .callback = set_pci_reboot, + .ident = "Apple MacBook", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "MacBook5,2"), + }, + }, + { } +}; + +static int __init pci_reboot_init(void) +{ + dmi_check_system(pci_reboot_dmi_table); + return 0; +} +core_initcall(pci_reboot_init); + static inline void kb_wait(void) { int i; -- cgit v1.1 From 6a7bbd57ed50bb62c9a81ae5f2e202ca689e5964 Mon Sep 17 00:00:00 2001 From: Paul Mackerras <paulus@samba.org> Date: Mon, 3 Aug 2009 22:38:10 +1000 Subject: x86: Make 64-bit efi_ioremap use ioremap on MMIO regions Booting current 64-bit x86 kernels on the latest Apple MacBook (MacBook5,2) via EFI gives the following warning: [ 0.182209] ------------[ cut here ]------------ [ 0.182222] WARNING: at arch/x86/mm/pageattr.c:581 __cpa_process_fault+0x44/0xa0() [ 0.182227] Hardware name: MacBook5,2 [ 0.182231] CPA: called for zero pte. vaddr = ffff8800ffe00000 cpa->vaddr = ffff8800ffe00000 [ 0.182236] Modules linked in: [ 0.182242] Pid: 0, comm: swapper Not tainted 2.6.31-rc4 #6 [ 0.182246] Call Trace: [ 0.182254] [<ffffffff8102c754>] ? __cpa_process_fault+0x44/0xa0 [ 0.182261] [<ffffffff81048668>] warn_slowpath_common+0x78/0xd0 [ 0.182266] [<ffffffff81048744>] warn_slowpath_fmt+0x64/0x70 [ 0.182272] [<ffffffff8102c7ec>] ? update_page_count+0x3c/0x50 [ 0.182280] [<ffffffff818d25c5>] ? phys_pmd_init+0x140/0x22e [ 0.182286] [<ffffffff8102c754>] __cpa_process_fault+0x44/0xa0 [ 0.182292] [<ffffffff8102ce60>] __change_page_attr_set_clr+0x5f0/0xb40 [ 0.182301] [<ffffffff810d1035>] ? vm_unmap_aliases+0x175/0x190 [ 0.182307] [<ffffffff8102d4ae>] change_page_attr_set_clr+0xfe/0x3d0 [ 0.182314] [<ffffffff8102dcca>] _set_memory_uc+0x2a/0x30 [ 0.182319] [<ffffffff8102dd4b>] set_memory_uc+0x7b/0xb0 [ 0.182327] [<ffffffff818afe31>] efi_enter_virtual_mode+0x2ad/0x2c9 [ 0.182334] [<ffffffff818a1c66>] start_kernel+0x2db/0x3f4 [ 0.182340] [<ffffffff818a1289>] x86_64_start_reservations+0x99/0xb9 [ 0.182345] [<ffffffff818a1389>] x86_64_start_kernel+0xe0/0xf2 [ 0.182357] ---[ end trace 4eaa2a86a8e2da22 ]--- [ 0.182982] init_memory_mapping: 00000000ffffc000-0000000100000000 [ 0.182993] 00ffffc000 - 0100000000 page 4k This happens because the 64-bit version of efi_ioremap calls init_memory_mapping for all addresses, regardless of whether they are RAM or MMIO. The EFI tables on this machine ask for runtime access to some MMIO regions: [ 0.000000] EFI: mem195: type=11, attr=0x8000000000000000, range=[0x0000000093400000-0x0000000093401000) (0MB) [ 0.000000] EFI: mem196: type=11, attr=0x8000000000000000, range=[0x00000000ffc00000-0x00000000ffc40000) (0MB) [ 0.000000] EFI: mem197: type=11, attr=0x8000000000000000, range=[0x00000000ffc40000-0x00000000ffc80000) (0MB) [ 0.000000] EFI: mem198: type=11, attr=0x8000000000000000, range=[0x00000000ffc80000-0x00000000ffca4000) (0MB) [ 0.000000] EFI: mem199: type=11, attr=0x8000000000000000, range=[0x00000000ffca4000-0x00000000ffcb4000) (0MB) [ 0.000000] EFI: mem200: type=11, attr=0x8000000000000000, range=[0x00000000ffcb4000-0x00000000ffffc000) (3MB) [ 0.000000] EFI: mem201: type=11, attr=0x8000000000000000, range=[0x00000000ffffc000-0x0000000100000000) (0MB) This arranges to pass the EFI memory type through to efi_ioremap, and makes efi_ioremap use ioremap rather than init_memory_mapping if the type is EFI_MEMORY_MAPPED_IO. With this, the above warning goes away. Signed-off-by: Paul Mackerras <paulus@samba.org> LKML-Reference: <19062.55858.533494.471153@cargo.ozlabs.ibm.com> Cc: Huang Ying <ying.huang@intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> --- arch/x86/include/asm/efi.h | 5 +++-- arch/x86/kernel/efi.c | 2 +- arch/x86/kernel/efi_64.c | 6 +++++- 3 files changed, 9 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/efi.h b/arch/x86/include/asm/efi.h index edc90f2..8406ed7 100644 --- a/arch/x86/include/asm/efi.h +++ b/arch/x86/include/asm/efi.h @@ -33,7 +33,7 @@ extern unsigned long asmlinkage efi_call_phys(void *, ...); #define efi_call_virt6(f, a1, a2, a3, a4, a5, a6) \ efi_call_virt(f, a1, a2, a3, a4, a5, a6) -#define efi_ioremap(addr, size) ioremap_cache(addr, size) +#define efi_ioremap(addr, size, type) ioremap_cache(addr, size) #else /* !CONFIG_X86_32 */ @@ -84,7 +84,8 @@ extern u64 efi_call6(void *fp, u64 arg1, u64 arg2, u64 arg3, efi_call6((void *)(efi.systab->runtime->f), (u64)(a1), (u64)(a2), \ (u64)(a3), (u64)(a4), (u64)(a5), (u64)(a6)) -extern void __iomem *efi_ioremap(unsigned long addr, unsigned long size); +extern void __iomem *efi_ioremap(unsigned long addr, unsigned long size, + u32 type); #endif /* CONFIG_X86_32 */ diff --git a/arch/x86/kernel/efi.c b/arch/x86/kernel/efi.c index 96f7ac0..19ccf6d 100644 --- a/arch/x86/kernel/efi.c +++ b/arch/x86/kernel/efi.c @@ -512,7 +512,7 @@ void __init efi_enter_virtual_mode(void) && end_pfn <= max_pfn_mapped)) va = __va(md->phys_addr); else - va = efi_ioremap(md->phys_addr, size); + va = efi_ioremap(md->phys_addr, size, md->type); md->virt_addr = (u64) (unsigned long) va; diff --git a/arch/x86/kernel/efi_64.c b/arch/x86/kernel/efi_64.c index 22c3b78..ac0621a 100644 --- a/arch/x86/kernel/efi_64.c +++ b/arch/x86/kernel/efi_64.c @@ -98,10 +98,14 @@ void __init efi_call_phys_epilog(void) early_runtime_code_mapping_set_exec(0); } -void __iomem *__init efi_ioremap(unsigned long phys_addr, unsigned long size) +void __iomem *__init efi_ioremap(unsigned long phys_addr, unsigned long size, + u32 type) { unsigned long last_map_pfn; + if (type == EFI_MEMORY_MAPPED_IO) + return ioremap(phys_addr, size); + last_map_pfn = init_memory_mapping(phys_addr, phys_addr + size); if ((last_map_pfn << PAGE_SHIFT) < phys_addr + size) return NULL; -- cgit v1.1 From d2ba8b211bb8abc29aa627dbd4dce08cfbc8082b Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" <hpa@zytor.com> Date: Mon, 3 Aug 2009 14:44:54 -0700 Subject: x86: Fix assert syntax in vmlinux.lds.S Older versions of binutils did not accept the naked "ASSERT" syntax; it is considered an expression whose value needs to be assigned to something. Reported-tested-and-fixed-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com> --- arch/x86/kernel/vmlinux.lds.S | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S index 59f31d2..78d185d 100644 --- a/arch/x86/kernel/vmlinux.lds.S +++ b/arch/x86/kernel/vmlinux.lds.S @@ -393,8 +393,8 @@ SECTIONS #ifdef CONFIG_X86_32 -ASSERT((_end - LOAD_OFFSET <= KERNEL_IMAGE_SIZE), - "kernel image bigger than KERNEL_IMAGE_SIZE") +. = ASSERT((_end - LOAD_OFFSET <= KERNEL_IMAGE_SIZE), + "kernel image bigger than KERNEL_IMAGE_SIZE"); #else /* * Per-cpu symbols which need to be offset from __per_cpu_load @@ -407,12 +407,12 @@ INIT_PER_CPU(irq_stack_union); /* * Build-time check on the image size: */ -ASSERT((_end - _text <= KERNEL_IMAGE_SIZE), - "kernel image bigger than KERNEL_IMAGE_SIZE") +. = ASSERT((_end - _text <= KERNEL_IMAGE_SIZE), + "kernel image bigger than KERNEL_IMAGE_SIZE"); #ifdef CONFIG_SMP -ASSERT((per_cpu__irq_stack_union == 0), - "irq_stack_union is not at start of per-cpu area"); +. = ASSERT((per_cpu__irq_stack_union == 0), + "irq_stack_union is not at start of per-cpu area"); #endif #endif /* CONFIG_X86_32 */ @@ -420,7 +420,7 @@ ASSERT((per_cpu__irq_stack_union == 0), #ifdef CONFIG_KEXEC #include <asm/kexec.h> -ASSERT(kexec_control_code_size <= KEXEC_CONTROL_CODE_MAX_SIZE, - "kexec control code size is too big") +. = ASSERT(kexec_control_code_size <= KEXEC_CONTROL_CODE_MAX_SIZE, + "kexec control code size is too big"); #endif -- cgit v1.1 From bab9a3da93bfe09c609407dedae5708b07a7ac56 Mon Sep 17 00:00:00 2001 From: Borislav Petkov <borislav.petkov@amd.com> Date: Thu, 30 Jul 2009 11:10:01 +0200 Subject: x86, msr: execute on the correct CPU subset Make rdmsr_on_cpus/wrmsr_on_cpus execute on the current CPU only if it is in the supplied bitmask. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> --- arch/x86/lib/msr.c | 26 ++++++++++---------------- 1 file changed, 10 insertions(+), 16 deletions(-) (limited to 'arch') diff --git a/arch/x86/lib/msr.c b/arch/x86/lib/msr.c index 1440b9c..caa24ac 100644 --- a/arch/x86/lib/msr.c +++ b/arch/x86/lib/msr.c @@ -89,16 +89,13 @@ void rdmsr_on_cpus(const cpumask_t *mask, u32 msr_no, struct msr *msrs) rv.msrs = msrs; rv.msr_no = msr_no; - preempt_disable(); - /* - * FIXME: handle the CPU we're executing on separately for now until - * smp_call_function_many has been fixed to not skip it. - */ - this_cpu = raw_smp_processor_id(); - smp_call_function_single(this_cpu, __rdmsr_on_cpu, &rv, 1); + this_cpu = get_cpu(); + + if (cpumask_test_cpu(this_cpu, mask)) + __rdmsr_on_cpu(&rv); smp_call_function_many(mask, __rdmsr_on_cpu, &rv, 1); - preempt_enable(); + put_cpu(); } EXPORT_SYMBOL(rdmsr_on_cpus); @@ -121,16 +118,13 @@ void wrmsr_on_cpus(const cpumask_t *mask, u32 msr_no, struct msr *msrs) rv.msrs = msrs; rv.msr_no = msr_no; - preempt_disable(); - /* - * FIXME: handle the CPU we're executing on separately for now until - * smp_call_function_many has been fixed to not skip it. - */ - this_cpu = raw_smp_processor_id(); - smp_call_function_single(this_cpu, __wrmsr_on_cpu, &rv, 1); + this_cpu = get_cpu(); + + if (cpumask_test_cpu(this_cpu, mask)) + __wrmsr_on_cpu(&rv); smp_call_function_many(mask, __wrmsr_on_cpu, &rv, 1); - preempt_enable(); + put_cpu(); } EXPORT_SYMBOL(wrmsr_on_cpus); -- cgit v1.1 From f1f029c7bfbf4ee1918b90a431ab823bed812504 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" <hpa@zytor.com> Date: Mon, 3 Aug 2009 16:33:40 -0700 Subject: x86: fix assembly constraints in native_save_fl() From Gabe Black in bugzilla 13888: native_save_fl is implemented as follows: 11static inline unsigned long native_save_fl(void) 12{ 13 unsigned long flags; 14 15 asm volatile("# __raw_save_flags\n\t" 16 "pushf ; pop %0" 17 : "=g" (flags) 18 : /* no input */ 19 : "memory"); 20 21 return flags; 22} If gcc chooses to put flags on the stack, for instance because this is inlined into a larger function with more register pressure, the offset of the flags variable from the stack pointer will change when the pushf is performed. gcc doesn't attempt to understand that fact, and address used for pop will still be the same. It will write to somewhere near flags on the stack but not actually into it and overwrite some other value. I saw this happen in the ide_device_add_all function when running in a simulator I work on. I'm assuming that some quirk of how the simulated hardware is set up caused the code path this is on to be executed when it normally wouldn't. A simple fix might be to change "=g" to "=r". Reported-by: Gabe Black <spamforgabe@umich.edu> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: Stable Team <stable@kernel.org> --- arch/x86/include/asm/irqflags.h | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/include/asm/irqflags.h b/arch/x86/include/asm/irqflags.h index 2bdab21..c6ccbe7 100644 --- a/arch/x86/include/asm/irqflags.h +++ b/arch/x86/include/asm/irqflags.h @@ -12,9 +12,15 @@ static inline unsigned long native_save_fl(void) { unsigned long flags; + /* + * Note: this needs to be "=r" not "=rm", because we have the + * stack offset from what gcc expects at the time the "pop" is + * executed, and so a memory reference with respect to the stack + * would end up using the wrong address. + */ asm volatile("# __raw_save_flags\n\t" "pushf ; pop %0" - : "=g" (flags) + : "=r" (flags) : /* no input */ : "memory"); -- cgit v1.1 From 6c7184b77464261b7d55583a48accbd1350923a3 Mon Sep 17 00:00:00 2001 From: Jack Steiner <steiner@sgi.com> Date: Mon, 27 Jul 2009 09:35:07 -0500 Subject: x86, UV: Handle missing blade-local memory correctly UV blades may not have any blade-local memory. Add a field (nid) to the UV blade structure to indicates whether the node has local memory. This is needed by the GRU driver (pushed separately). Signed-off-by: Jack Steiner <steiner@sgi.com> Cc: linux-mm@kvack.org LKML-Reference: <20090727143507.GA7006@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/include/asm/uv/uv_hub.h | 7 +++++++ arch/x86/kernel/apic/x2apic_uv_x.c | 5 +++++ 2 files changed, 12 insertions(+) (limited to 'arch') diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h index 341070f..a6dde05 100644 --- a/arch/x86/include/asm/uv/uv_hub.h +++ b/arch/x86/include/asm/uv/uv_hub.h @@ -327,6 +327,7 @@ struct uv_blade_info { unsigned short nr_possible_cpus; unsigned short nr_online_cpus; unsigned short pnode; + short memory_nid; }; extern struct uv_blade_info *uv_blade_info; extern short *uv_node_to_blade; @@ -363,6 +364,12 @@ static inline int uv_blade_to_pnode(int bid) return uv_blade_info[bid].pnode; } +/* Nid of memory node on blade. -1 if no blade-local memory */ +static inline int uv_blade_to_memory_nid(int bid) +{ + return uv_blade_info[bid].memory_nid; +} + /* Determine the number of possible cpus on a blade */ static inline int uv_blade_nr_possible_cpus(int bid) { diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c index 096d19a..ad3f0a9 100644 --- a/arch/x86/kernel/apic/x2apic_uv_x.c +++ b/arch/x86/kernel/apic/x2apic_uv_x.c @@ -591,6 +591,8 @@ void __init uv_system_init(void) bytes = sizeof(struct uv_blade_info) * uv_num_possible_blades(); uv_blade_info = kmalloc(bytes, GFP_KERNEL); BUG_ON(!uv_blade_info); + for (blade = 0; blade < uv_num_possible_blades(); blade++) + uv_blade_info[blade].memory_nid = -1; get_lowmem_redirect(&lowmem_redir_base, &lowmem_redir_size); @@ -629,6 +631,9 @@ void __init uv_system_init(void) lcpu = uv_blade_info[blade].nr_possible_cpus; uv_blade_info[blade].nr_possible_cpus++; + /* Any node on the blade, else will contain -1. */ + uv_blade_info[blade].memory_nid = nid; + uv_cpu_hub_info(cpu)->lowmem_remap_base = lowmem_redir_base; uv_cpu_hub_info(cpu)->lowmem_remap_top = lowmem_redir_size; uv_cpu_hub_info(cpu)->m_val = m_val; -- cgit v1.1 From cc5e4fa1bd4d2f56da07f9092281afdcd2374ab9 Mon Sep 17 00:00:00 2001 From: Jack Steiner <steiner@sgi.com> Date: Mon, 27 Jul 2009 09:36:56 -0500 Subject: x86, UV: Delete mapping of MMR rangs mapped by BIOS The UV BIOS has added additional MMR ranges that are mapped via EFI virtual mode mappings. These ranges should be deleted from ranges mapped by uv_system_init(). Signed-off-by: Jack Steiner <steiner@sgi.com> Cc: linux-mm@kvack.org LKML-Reference: <20090727143656.GA7698@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/kernel/apic/x2apic_uv_x.c | 31 +------------------------------ 1 file changed, 1 insertion(+), 30 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c index ad3f0a9..445c210 100644 --- a/arch/x86/kernel/apic/x2apic_uv_x.c +++ b/arch/x86/kernel/apic/x2apic_uv_x.c @@ -362,12 +362,6 @@ static __init void get_lowmem_redirect(unsigned long *base, unsigned long *size) BUG(); } -static __init void map_low_mmrs(void) -{ - init_extra_mapping_uc(UV_GLOBAL_MMR32_BASE, UV_GLOBAL_MMR32_SIZE); - init_extra_mapping_uc(UV_LOCAL_MMR_BASE, UV_LOCAL_MMR_SIZE); -} - enum map_type {map_wb, map_uc}; static __init void map_high(char *id, unsigned long base, int shift, @@ -395,26 +389,6 @@ static __init void map_gru_high(int max_pnode) map_high("GRU", gru.s.base, shift, max_pnode, map_wb); } -static __init void map_config_high(int max_pnode) -{ - union uvh_rh_gam_cfg_overlay_config_mmr_u cfg; - int shift = UVH_RH_GAM_CFG_OVERLAY_CONFIG_MMR_BASE_SHFT; - - cfg.v = uv_read_local_mmr(UVH_RH_GAM_CFG_OVERLAY_CONFIG_MMR); - if (cfg.s.enable) - map_high("CONFIG", cfg.s.base, shift, max_pnode, map_uc); -} - -static __init void map_mmr_high(int max_pnode) -{ - union uvh_rh_gam_mmr_overlay_config_mmr_u mmr; - int shift = UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_BASE_SHFT; - - mmr.v = uv_read_local_mmr(UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR); - if (mmr.s.enable) - map_high("MMR", mmr.s.base, shift, max_pnode, map_uc); -} - static __init void map_mmioh_high(int max_pnode) { union uvh_rh_gam_mmioh_overlay_config_mmr_u mmioh; @@ -566,8 +540,6 @@ void __init uv_system_init(void) unsigned long mmr_base, present, paddr; unsigned short pnode_mask; - map_low_mmrs(); - m_n_config.v = uv_read_local_mmr(UVH_SI_ADDR_MAP_CONFIG); m_val = m_n_config.s.m_skt; n_val = m_n_config.s.n_skt; @@ -667,11 +639,10 @@ void __init uv_system_init(void) pnode = (paddr >> m_val) & pnode_mask; blade = boot_pnode_to_blade(pnode); uv_node_to_blade[nid] = blade; + max_pnode = max(pnode, max_pnode); } map_gru_high(max_pnode); - map_mmr_high(max_pnode); - map_config_high(max_pnode); map_mmioh_high(max_pnode); uv_cpu_init(); -- cgit v1.1 From 67e83f309ed0baaf01a2c956b5174905bcdc1242 Mon Sep 17 00:00:00 2001 From: Jack Steiner <steiner@sgi.com> Date: Mon, 27 Jul 2009 09:38:08 -0500 Subject: x86, UV: Fix macros for accessing large node numbers The UV chipset automatically supplies the upper bits on nodes being referenced by MMR accesses. These bit can be deleted from the hub addressing macros. Signed-off-by: Jack Steiner <steiner@sgi.com> LKML-Reference: <20090727143808.GA8076@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/include/asm/uv/uv_hub.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h index a6dde05..77a6850 100644 --- a/arch/x86/include/asm/uv/uv_hub.h +++ b/arch/x86/include/asm/uv/uv_hub.h @@ -175,7 +175,7 @@ DECLARE_PER_CPU(struct uv_hub_info_s, __uv_hub_info); #define UV_GLOBAL_MMR32_PNODE_BITS(p) ((p) << (UV_GLOBAL_MMR32_PNODE_SHIFT)) #define UV_GLOBAL_MMR64_PNODE_BITS(p) \ - ((unsigned long)(UV_PNODE_TO_GNODE(p)) << UV_GLOBAL_MMR64_PNODE_SHIFT) + (((unsigned long)(p)) << UV_GLOBAL_MMR64_PNODE_SHIFT) #define UV_APIC_PNODE_SHIFT 6 -- cgit v1.1 From c5997fa8d7aca3c9876a6ff71bacf27c41095ce9 Mon Sep 17 00:00:00 2001 From: Jack Steiner <steiner@sgi.com> Date: Mon, 27 Jul 2009 09:38:56 -0500 Subject: x86, UV: Fix UV apic mode Change SGI UV default apicid mode to "physical". This is required to match settings in the UV hub chip. Signed-off-by: Jack Steiner <steiner@sgi.com> LKML-Reference: <20090727143856.GA8905@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/kernel/apic/x2apic_uv_x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c index 445c210..832e908 100644 --- a/arch/x86/kernel/apic/x2apic_uv_x.c +++ b/arch/x86/kernel/apic/x2apic_uv_x.c @@ -261,7 +261,7 @@ struct apic apic_x2apic_uv_x = { .apic_id_registered = uv_apic_id_registered, .irq_delivery_mode = dest_Fixed, - .irq_dest_mode = 1, /* logical */ + .irq_dest_mode = 0, /* physical */ .target_cpus = uv_target_cpus, .disable_esr = 0, -- cgit v1.1 From d8c7eb34c2db6268909ae8c3958be63bde254292 Mon Sep 17 00:00:00 2001 From: Yinghai Lu <yinghai@kernel.org> Date: Sat, 25 Jul 2009 03:23:09 -0700 Subject: x86: Don't use current_cpu_data in x2apic phys_pkg_id One system has socket 1 come up as BSP. kexeced kernel reports BSP as: [ 1.524550] Initializing cgroup subsys cpuacct [ 1.536064] initial_apicid:20 [ 1.537135] ht_mask_width:1 [ 1.538128] core_select_mask:f [ 1.539126] core_plus_mask_width:5 [ 1.558479] CPU: Physical Processor ID: 0 [ 1.559501] CPU: Processor Core ID: 0 [ 1.560539] CPU: L1 I cache: 32K, L1 D cache: 32K [ 1.579098] CPU: L2 cache: 256K [ 1.580085] CPU: L3 cache: 24576K [ 1.581108] CPU 0/0x20 -> Node 0 [ 1.596193] CPU 0 microcode level: 0xffff0008 It doesn't have correct physical processor id and will get an error: [ 38.840859] CPU0 attaching sched-domain: [ 38.848287] domain 0: span 0,8,72 level SIBLING [ 38.851151] groups: 0 8 72 [ 38.858137] domain 1: span 0,8-15,72-79 level MC [ 38.868944] groups: 0,8,72 9,73 10,74 11,75 12,76 13,77 14,78 15,79 [ 38.881383] ERROR: parent span is not a superset of domain->span [ 38.890724] domain 2: span 0-7,64-71 level CPU [ 38.899237] ERROR: domain->groups does not contain CPU0 [ 38.909229] groups: 8-15,72-79 [ 38.912547] ERROR: groups don't span domain->span [ 38.919665] domain 3: span 0-127 level NODE [ 38.930739] groups: 0-7,64-71 8-15,72-79 16-23,80-87 24-31,88-95 32-39,96-103 40-47,104-111 48-55,112-119 56-63,120-127 it turns out: we can not use current_cpu_data in phys_pgd_id for x2apic. identify_boot_cpu() is called by check_bugs() before smp_prepare_cpus() and till smp_prepare_cpus() current_cpu_data for bsp is assigned with boot_cpu_data. Just make phys_pkg_id for x2apic is aligned to xapic. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> LKML-Reference: <4A6ADD0D.10002@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/kernel/apic/x2apic_cluster.c | 2 +- arch/x86/kernel/apic/x2apic_phys.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/x2apic_cluster.c b/arch/x86/kernel/apic/x2apic_cluster.c index 8e4cbb2..2ed4e2b 100644 --- a/arch/x86/kernel/apic/x2apic_cluster.c +++ b/arch/x86/kernel/apic/x2apic_cluster.c @@ -170,7 +170,7 @@ static unsigned long set_apic_id(unsigned int id) static int x2apic_cluster_phys_pkg_id(int initial_apicid, int index_msb) { - return current_cpu_data.initial_apicid >> index_msb; + return initial_apicid >> index_msb; } static void x2apic_send_IPI_self(int vector) diff --git a/arch/x86/kernel/apic/x2apic_phys.c b/arch/x86/kernel/apic/x2apic_phys.c index a284359..0b631c6 100644 --- a/arch/x86/kernel/apic/x2apic_phys.c +++ b/arch/x86/kernel/apic/x2apic_phys.c @@ -162,7 +162,7 @@ static unsigned long set_apic_id(unsigned int id) static int x2apic_phys_pkg_id(int initial_apicid, int index_msb) { - return current_cpu_data.initial_apicid >> index_msb; + return initial_apicid >> index_msb; } static void x2apic_send_IPI_self(int vector) -- cgit v1.1 From 6abf65510944d33b47575d151c6b318993c8d2b5 Mon Sep 17 00:00:00 2001 From: Jan Beulich <JBeulich@novell.com> Date: Thu, 30 Jul 2009 16:49:30 +0100 Subject: x86, 32-bit: Fix double accounting in reserve_top_address() With VMALLOC_END included in the calculation of MAXMEM (as of 2.6.28) it is no longer correct to also bump __VMALLOC_RESERVE in reserve_top_address(). Doing so results in needlessly small lowmem. Signed-off-by: Jan Beulich <jbeulich@novell.com> LKML-Reference: <4A71DD2A020000780000D482@vpn.id2.novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/mm/pgtable.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c index af8f965..ed34f5e 100644 --- a/arch/x86/mm/pgtable.c +++ b/arch/x86/mm/pgtable.c @@ -329,7 +329,6 @@ void __init reserve_top_address(unsigned long reserve) printk(KERN_INFO "Reserving virtual address space above 0x%08x\n", (int)-reserve); __FIXADDR_TOP = -reserve - PAGE_SIZE; - __VMALLOC_RESERVE += reserve; #endif } -- cgit v1.1 From 2a5ef41661b56cf4eee042a6967c4e14b63e8eac Mon Sep 17 00:00:00 2001 From: Jack Steiner <steiner@sgi.com> Date: Mon, 20 Jul 2009 09:28:41 -0500 Subject: x86, UV: Complete IRQ interrupt migration in arch_enable_uv_irq() In uv_setup_irq(), the call to create_irq() initially assigns IRQ vectors to cpu 0. The subsequent call to assign_irq_vector() in arch_enable_uv_irq() migrates the IRQ to another cpu and frees the cpu 0 vector - at least it will be freed as soon as the "IRQ move" completes. arch_enable_uv_irq() needs to send a cleanup IPI to complete the IRQ move. Otherwise, assignment of GRU interrupts on large systems (>200 cpus) will exhaust the cpu 0 interrupt vectors and initialization of the GRU driver will fail. Signed-off-by: Jack Steiner <steiner@sgi.com> LKML-Reference: <20090720142840.GA8885@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/kernel/apic/io_apic.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 2284a48..d2ed6c5 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -3793,6 +3793,9 @@ int arch_enable_uv_irq(char *irq_name, unsigned int irq, int cpu, int mmr_blade, mmr_pnode = uv_blade_to_pnode(mmr_blade); uv_write_global_mmr64(mmr_pnode, mmr_offset, mmr_value); + if (cfg->move_in_progress) + send_cleanup_vector(cfg); + return irq; } -- cgit v1.1 From dc731fbbadf5d65c98fcd6c86472aa286c16458a Mon Sep 17 00:00:00 2001 From: Subrata Modak <subrata@linux.vnet.ibm.com> Date: Tue, 21 Jul 2009 08:02:27 +0530 Subject: x86: Work around compilation warning in arch/x86/kernel/apm_32.c The following fix was initially inspired by David Howells fix few days back: http://lkml.org/lkml/2009/7/9/109 However, Ingo disapproves such fixes as it's dangerous (it can hide future, relevant warnings) - in something as performance-uncritical. So, initialize 'err' to '0' to work around a GCC false positive warning: http://lkml.org/lkml/2009/7/18/89 Signed-off-by: Subrata Modak<subrata@linux.vnet.ibm.com> Cc: Sachin P Sant <sachinp@linux.vnet.ibm.com> Cc: David Howells <dhowells@redhat.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> LKML-Reference: <20090721023226.31855.67236.sendpatchset@subratamodak.linux.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/kernel/apm_32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c index 79302e9..442b550 100644 --- a/arch/x86/kernel/apm_32.c +++ b/arch/x86/kernel/apm_32.c @@ -811,7 +811,7 @@ static int apm_do_idle(void) u8 ret = 0; int idled = 0; int polling; - int err; + int err = 0; polling = !!(current_thread_info()->status & TS_POLLING); if (polling) { -- cgit v1.1 From 7d5b005652bc5ae3e1e0efc53fd0e25a643ec506 Mon Sep 17 00:00:00 2001 From: Alok Kataria <akataria@vmware.com> Date: Tue, 4 Aug 2009 15:34:22 -0700 Subject: x86: Fix VMI && stack protector With CONFIG_STACK_PROTECTOR turned on, VMI doesn't boot with more than one processor. The problem is with the gs value not being initialized correctly when registering the secondary processor for VMI's case. The patch below initializes the gs value for the AP to __KERNEL_STACK_CANARY. Without this the secondary processor keeps on taking a GP on every gs access. Signed-off-by: Alok N Kataria <akataria@vmware.com> Cc: <stable@kernel.org> # for v2.6.30.x LKML-Reference: <1249425262.18955.40.camel@ank32.eng.vmware.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/kernel/vmi_32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/vmi_32.c b/arch/x86/kernel/vmi_32.c index b263423..95a7289 100644 --- a/arch/x86/kernel/vmi_32.c +++ b/arch/x86/kernel/vmi_32.c @@ -441,7 +441,7 @@ vmi_startup_ipi_hook(int phys_apicid, unsigned long start_eip, ap.ds = __USER_DS; ap.es = __USER_DS; ap.fs = __KERNEL_PERCPU; - ap.gs = 0; + ap.gs = __KERNEL_STACK_CANARY; ap.eflags = 0; -- cgit v1.1 From e125e7b6944898831b56739a5448e705578bf7e2 Mon Sep 17 00:00:00 2001 From: Jan Kiszka <jan.kiszka@web.de> Date: Thu, 2 Jul 2009 21:45:47 +0200 Subject: KVM: Fix KVM_GET_MSR_INDEX_LIST So far, KVM copied the emulated_msrs (only MSR_IA32_MISC_ENABLE) to a wrong address in user space due to broken pointer arithmetic. This caused subtle corruption up there (missing MSR_IA32_MISC_ENABLE had probably no practical relevance). Moreover, the size check for the user-provided kvm_msr_list forgot about emulated MSRs. Cc: stable@kernel.org Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com> --- arch/x86/kvm/x86.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index fe5474a..7bc3114 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -1079,14 +1079,13 @@ long kvm_arch_dev_ioctl(struct file *filp, if (copy_to_user(user_msr_list, &msr_list, sizeof msr_list)) goto out; r = -E2BIG; - if (n < num_msrs_to_save) + if (n < msr_list.nmsrs) goto out; r = -EFAULT; if (copy_to_user(user_msr_list->indices, &msrs_to_save, num_msrs_to_save * sizeof(u32))) goto out; - if (copy_to_user(user_msr_list->indices - + num_msrs_to_save * sizeof(u32), + if (copy_to_user(user_msr_list->indices + num_msrs_to_save, &emulated_msrs, ARRAY_SIZE(emulated_msrs) * sizeof(u32))) goto out; -- cgit v1.1 From 0ff77873b1318fc2d77a85e70690d3cd6cafbd41 Mon Sep 17 00:00:00 2001 From: Marcelo Tosatti <mtosatti@redhat.com> Date: Thu, 2 Jul 2009 20:02:15 -0300 Subject: KVM: PIT: fix kpit_elapsed division by zero Fix division by zero triggered by latch count command on uninitialized counter. Cc: stable@kernel.org Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com> --- arch/x86/kvm/i8254.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c index 4d6f0d2..21f68e0 100644 --- a/arch/x86/kvm/i8254.c +++ b/arch/x86/kvm/i8254.c @@ -104,6 +104,9 @@ static s64 __kpit_elapsed(struct kvm *kvm) ktime_t remaining; struct kvm_kpit_state *ps = &kvm->arch.vpit->pit_state; + if (!ps->pit_timer.period) + return 0; + /* * The Counter does not stop when it reaches zero. In * Modes 0, 1, 4, and 5 the Counter ``wraps around'' to -- cgit v1.1 From d6289b9365c3f622a8cfe62c4fb054bb70b5061a Mon Sep 17 00:00:00 2001 From: Marcelo Tosatti <mtosatti@redhat.com> Date: Mon, 22 Jun 2009 15:27:56 -0300 Subject: KVM: x86: verify MTRR/PAT validity Do not allow invalid memory types in MTRR/PAT (generating a #GP otherwise). Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com> --- arch/x86/kvm/x86.c | 39 ++++++++++++++++++++++++++++++++++++++- 1 file changed, 38 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 7bc3114..3d45290 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -704,11 +704,48 @@ static bool msr_mtrr_valid(unsigned msr) return false; } +static bool valid_pat_type(unsigned t) +{ + return t < 8 && (1 << t) & 0xf3; /* 0, 1, 4, 5, 6, 7 */ +} + +static bool valid_mtrr_type(unsigned t) +{ + return t < 8 && (1 << t) & 0x73; /* 0, 1, 4, 5, 6 */ +} + +static bool mtrr_valid(struct kvm_vcpu *vcpu, u32 msr, u64 data) +{ + int i; + + if (!msr_mtrr_valid(msr)) + return false; + + if (msr == MSR_IA32_CR_PAT) { + for (i = 0; i < 8; i++) + if (!valid_pat_type((data >> (i * 8)) & 0xff)) + return false; + return true; + } else if (msr == MSR_MTRRdefType) { + if (data & ~0xcff) + return false; + return valid_mtrr_type(data & 0xff); + } else if (msr >= MSR_MTRRfix64K_00000 && msr <= MSR_MTRRfix4K_F8000) { + for (i = 0; i < 8 ; i++) + if (!valid_mtrr_type((data >> (i * 8)) & 0xff)) + return false; + return true; + } + + /* variable MTRRs */ + return valid_mtrr_type(data & 0xff); +} + static int set_msr_mtrr(struct kvm_vcpu *vcpu, u32 msr, u64 data) { u64 *p = (u64 *)&vcpu->arch.mtrr_state.fixed_ranges; - if (!msr_mtrr_valid(msr)) + if (!mtrr_valid(vcpu, msr, data)) return 1; if (msr == MSR_MTRRdefType) { -- cgit v1.1 From 4b656b1202498184a0ecef86b3b89ff613b9c6ab Mon Sep 17 00:00:00 2001 From: Marcelo Tosatti <mtosatti@redhat.com> Date: Tue, 21 Jul 2009 12:47:45 -0300 Subject: KVM: SVM: force new asid on vcpu migration If a migrated vcpu matches the asid_generation value of the target pcpu, there will be no TLB flush via TLB_CONTROL_FLUSH_ALL_ASID. The check for vcpu.cpu in pre_svm_run is meaningless since svm_vcpu_load already updated it on schedule in. Such vcpu will VMRUN with stale TLB entries. Based on original patch from Joerg Roedel (http://patchwork.kernel.org/patch/10021/) Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com> --- arch/x86/kvm/svm.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c index 71510e0..b1f658a 100644 --- a/arch/x86/kvm/svm.c +++ b/arch/x86/kvm/svm.c @@ -711,6 +711,7 @@ static void svm_vcpu_load(struct kvm_vcpu *vcpu, int cpu) svm->vmcb->control.tsc_offset += delta; vcpu->cpu = cpu; kvm_migrate_timers(vcpu); + svm->asid_generation = 0; } for (i = 0; i < NR_HOST_SAVE_USER_MSRS; i++) @@ -1031,7 +1032,6 @@ static void new_asid(struct vcpu_svm *svm, struct svm_cpu_data *svm_data) svm->vmcb->control.tlb_ctl = TLB_CONTROL_FLUSH_ALL_ASID; } - svm->vcpu.cpu = svm_data->cpu; svm->asid_generation = svm_data->asid_generation; svm->vmcb->control.asid = svm_data->next_asid++; } @@ -2300,8 +2300,8 @@ static void pre_svm_run(struct vcpu_svm *svm) struct svm_cpu_data *svm_data = per_cpu(svm_data, cpu); svm->vmcb->control.tlb_ctl = TLB_CONTROL_DO_NOTHING; - if (svm->vcpu.cpu != cpu || - svm->asid_generation != svm_data->asid_generation) + /* FIXME: handle wraparound of asid_generation */ + if (svm->asid_generation != svm_data->asid_generation) new_asid(svm, svm_data); } -- cgit v1.1 From 025dbbf36a7680bffe54d9dcbf0a8bc01a7cbd10 Mon Sep 17 00:00:00 2001 From: Marcelo Tosatti <mtosatti@redhat.com> Date: Wed, 22 Jul 2009 13:05:49 -0300 Subject: KVM: MMU: handle n_free_mmu_pages > n_alloc_mmu_pages in kvm_mmu_change_mmu_pages kvm_mmu_change_mmu_pages mishandles the case where n_alloc_mmu_pages is smaller then n_free_mmu_pages, by not checking if the result of the subtraction is negative. Its a valid condition which can happen if a large number of pages has been recently freed. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com> --- arch/x86/kvm/mmu.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index 7030b5f..49a10d0 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -1407,24 +1407,25 @@ static int kvm_mmu_zap_page(struct kvm *kvm, struct kvm_mmu_page *sp) */ void kvm_mmu_change_mmu_pages(struct kvm *kvm, unsigned int kvm_nr_mmu_pages) { + int used_pages; + + used_pages = kvm->arch.n_alloc_mmu_pages - kvm->arch.n_free_mmu_pages; + used_pages = max(0, used_pages); + /* * If we set the number of mmu pages to be smaller be than the * number of actived pages , we must to free some mmu pages before we * change the value */ - if ((kvm->arch.n_alloc_mmu_pages - kvm->arch.n_free_mmu_pages) > - kvm_nr_mmu_pages) { - int n_used_mmu_pages = kvm->arch.n_alloc_mmu_pages - - kvm->arch.n_free_mmu_pages; - - while (n_used_mmu_pages > kvm_nr_mmu_pages) { + if (used_pages > kvm_nr_mmu_pages) { + while (used_pages > kvm_nr_mmu_pages) { struct kvm_mmu_page *page; page = container_of(kvm->arch.active_mmu_pages.prev, struct kvm_mmu_page, link); kvm_mmu_zap_page(kvm, page); - n_used_mmu_pages--; + used_pages--; } kvm->arch.n_free_mmu_pages = 0; } -- cgit v1.1 From 34f0c1ad27a74bd5eb0f99ea43ab6a4658d6419d Mon Sep 17 00:00:00 2001 From: Jan Kiszka <jan.kiszka@web.de> Date: Wed, 22 Jul 2009 23:53:26 +0200 Subject: KVM: VMX: Fix locking order in handle_invalid_guest_state Release and re-acquire preemption and IRQ lock in the same order as vcpu_enter_guest does. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com> --- arch/x86/kvm/vmx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index 356a0ce..6bf58c0 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -3157,8 +3157,8 @@ static void handle_invalid_guest_state(struct kvm_vcpu *vcpu, struct vcpu_vmx *vmx = to_vmx(vcpu); enum emulation_result err = EMULATE_DONE; - preempt_enable(); local_irq_enable(); + preempt_enable(); while (!guest_state_valid(vcpu)) { err = emulate_instruction(vcpu, kvm_run, 0, 0, 0); @@ -3177,8 +3177,8 @@ static void handle_invalid_guest_state(struct kvm_vcpu *vcpu, schedule(); } - local_irq_disable(); preempt_disable(); + local_irq_disable(); vmx->invalid_state_emulation_result = err; } -- cgit v1.1 From 263799a3616242201e20fd2025fe84047b1379b1 Mon Sep 17 00:00:00 2001 From: Jan Kiszka <jan.kiszka@siemens.com> Date: Tue, 21 Jul 2009 10:43:07 +0200 Subject: KVM: VMX: Fix locking imbalance on emulation failure We have to disable preemption and IRQs on every exit from handle_invalid_guest_state, otherwise we generate at least a preempt_disable imbalance. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com> --- arch/x86/kvm/vmx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index 6bf58c0..29f9129 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -3168,7 +3168,7 @@ static void handle_invalid_guest_state(struct kvm_vcpu *vcpu, if (err != EMULATE_DONE) { kvm_report_emulation_failure(vcpu, "emulation failure"); - return; + break; } if (signal_pending(current)) -- cgit v1.1 From d3bc2f91b4761a8d9f96bea167fef2f8c00dea54 Mon Sep 17 00:00:00 2001 From: Christian Borntraeger <borntraeger@de.ibm.com> Date: Thu, 16 Jul 2009 17:17:37 +0200 Subject: KVM: s390: fix wait_queue handling There are two waitqueues in kvm for wait handling: vcpu->wq for virt/kvm/kvm_main.c and vpcu->arch.local_int.wq for the s390 specific wait code. the wait handling in kvm_s390_handle_wait was broken by using different wait_queues for add_wait queue and remove_wait_queue. There are two options to fix the problem: o move all the s390 specific code to vcpu->wq and remove vcpu->arch.local_int.wq o move all the s390 specific code to vcpu->arch.local_int.wq This patch chooses the 2nd variant for two reasons: o s390 does not use kvm_vcpu_block but implements its own enabled wait handling. Having a separate wait_queue make it clear, that our wait mechanism is different o the patch is much smaller Report-by: Julia Lawall <julia@diku.dk> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com> --- arch/s390/kvm/interrupt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/s390/kvm/interrupt.c b/arch/s390/kvm/interrupt.c index f04f530..4d61341 100644 --- a/arch/s390/kvm/interrupt.c +++ b/arch/s390/kvm/interrupt.c @@ -386,7 +386,7 @@ no_timer: } __unset_cpu_idle(vcpu); __set_current_state(TASK_RUNNING); - remove_wait_queue(&vcpu->wq, &wait); + remove_wait_queue(&vcpu->arch.local_int.wq, &wait); spin_unlock_bh(&vcpu->arch.local_int.lock); spin_unlock(&vcpu->arch.local_int.float_int->lock); hrtimer_try_to_cancel(&vcpu->arch.ckc_timer); -- cgit v1.1 From c428dcc9b9f967945992a2f8529e8c50a31d7913 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell <sfr@canb.auug.org.au> Date: Wed, 17 Jun 2009 15:04:19 +1000 Subject: KVM: Make KVM_HPAGES_PER_HPAGE unsigned long to avoid build error on powerpc Eliminates this compiler warning: arch/powerpc/kvm/../../../virt/kvm/kvm_main.c:1178: error: integer overflow in expression Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Avi Kivity <avi@redhat.com> --- arch/powerpc/include/asm/kvm_host.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h index dfdf13c..fddc3ed 100644 --- a/arch/powerpc/include/asm/kvm_host.h +++ b/arch/powerpc/include/asm/kvm_host.h @@ -34,7 +34,7 @@ #define KVM_COALESCED_MMIO_PAGE_OFFSET 1 /* We don't currently support large pages. */ -#define KVM_PAGES_PER_HPAGE (1<<31) +#define KVM_PAGES_PER_HPAGE (1UL << 31) struct kvm; struct kvm_run; -- cgit v1.1 From e9cbde8c158629cc96a26b2323c4a243536c1951 Mon Sep 17 00:00:00 2001 From: Avi Kivity <avi@redhat.com> Date: Mon, 6 Jul 2009 12:49:39 +0300 Subject: KVM: ia64: fix build failures due to ia64/unsigned long mismatches Signed-off-by: Avi Kivity <avi@redhat.com> --- arch/ia64/kvm/mmio.c | 6 ++++-- arch/ia64/kvm/vcpu.c | 6 +++--- arch/ia64/kvm/vcpu.h | 13 +++++++------ 3 files changed, 14 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kvm/mmio.c b/arch/ia64/kvm/mmio.c index 21f63ff..9bf55af 100644 --- a/arch/ia64/kvm/mmio.c +++ b/arch/ia64/kvm/mmio.c @@ -247,7 +247,8 @@ void emulate_io_inst(struct kvm_vcpu *vcpu, u64 padr, u64 ma) vcpu_get_fpreg(vcpu, inst.M9.f2, &v); /* Write high word. FIXME: this is a kludge! */ v.u.bits[1] &= 0x3ffff; - mmio_access(vcpu, padr + 8, &v.u.bits[1], 8, ma, IOREQ_WRITE); + mmio_access(vcpu, padr + 8, (u64 *)&v.u.bits[1], 8, + ma, IOREQ_WRITE); data = v.u.bits[0]; size = 3; } else if (inst.M10.major == 7 && inst.M10.x6 == 0x3B) { @@ -265,7 +266,8 @@ void emulate_io_inst(struct kvm_vcpu *vcpu, u64 padr, u64 ma) /* Write high word.FIXME: this is a kludge! */ v.u.bits[1] &= 0x3ffff; - mmio_access(vcpu, padr + 8, &v.u.bits[1], 8, ma, IOREQ_WRITE); + mmio_access(vcpu, padr + 8, (u64 *)&v.u.bits[1], + 8, ma, IOREQ_WRITE); data = v.u.bits[0]; size = 3; } else if (inst.M10.major == 7 && inst.M10.x6 == 0x31) { diff --git a/arch/ia64/kvm/vcpu.c b/arch/ia64/kvm/vcpu.c index 46b02cb..cc406d0 100644 --- a/arch/ia64/kvm/vcpu.c +++ b/arch/ia64/kvm/vcpu.c @@ -461,7 +461,7 @@ void setreg(unsigned long regnum, unsigned long val, u64 vcpu_get_gr(struct kvm_vcpu *vcpu, unsigned long reg) { struct kvm_pt_regs *regs = vcpu_regs(vcpu); - u64 val; + unsigned long val; if (!reg) return 0; @@ -469,7 +469,7 @@ u64 vcpu_get_gr(struct kvm_vcpu *vcpu, unsigned long reg) return val; } -void vcpu_set_gr(struct kvm_vcpu *vcpu, u64 reg, u64 value, int nat) +void vcpu_set_gr(struct kvm_vcpu *vcpu, unsigned long reg, u64 value, int nat) { struct kvm_pt_regs *regs = vcpu_regs(vcpu); long sof = (regs->cr_ifs) & 0x7f; @@ -1072,7 +1072,7 @@ void kvm_ttag(struct kvm_vcpu *vcpu, INST64 inst) vcpu_set_gr(vcpu, inst.M46.r1, tag, 0); } -int vcpu_tpa(struct kvm_vcpu *vcpu, u64 vadr, u64 *padr) +int vcpu_tpa(struct kvm_vcpu *vcpu, u64 vadr, unsigned long *padr) { struct thash_data *data; union ia64_isr visr, pt_isr; diff --git a/arch/ia64/kvm/vcpu.h b/arch/ia64/kvm/vcpu.h index 042af92..360724d 100644 --- a/arch/ia64/kvm/vcpu.h +++ b/arch/ia64/kvm/vcpu.h @@ -686,14 +686,15 @@ static inline int highest_inservice_irq(struct kvm_vcpu *vcpu) return highest_bits((int *)&(VMX(vcpu, insvc[0]))); } -extern void vcpu_get_fpreg(struct kvm_vcpu *vcpu, u64 reg, +extern void vcpu_get_fpreg(struct kvm_vcpu *vcpu, unsigned long reg, struct ia64_fpreg *val); -extern void vcpu_set_fpreg(struct kvm_vcpu *vcpu, u64 reg, +extern void vcpu_set_fpreg(struct kvm_vcpu *vcpu, unsigned long reg, struct ia64_fpreg *val); -extern u64 vcpu_get_gr(struct kvm_vcpu *vcpu, u64 reg); -extern void vcpu_set_gr(struct kvm_vcpu *vcpu, u64 reg, u64 val, int nat); -extern u64 vcpu_get_psr(struct kvm_vcpu *vcpu); -extern void vcpu_set_psr(struct kvm_vcpu *vcpu, u64 val); +extern u64 vcpu_get_gr(struct kvm_vcpu *vcpu, unsigned long reg); +extern void vcpu_set_gr(struct kvm_vcpu *vcpu, unsigned long reg, + u64 val, int nat); +extern unsigned long vcpu_get_psr(struct kvm_vcpu *vcpu); +extern void vcpu_set_psr(struct kvm_vcpu *vcpu, unsigned long val); extern u64 vcpu_thash(struct kvm_vcpu *vcpu, u64 vadr); extern void vcpu_bsw0(struct kvm_vcpu *vcpu); extern void thash_vhpt_insert(struct kvm_vcpu *v, u64 pte, -- cgit v1.1 From b37c45b8c27c049dc44673e40fd63820fd9a9d91 Mon Sep 17 00:00:00 2001 From: Roger Quadros <ext-roger.quadros@nokia.com> Date: Wed, 5 Aug 2009 16:53:24 +0300 Subject: OMAP: GPIO: Fix incorrect gpio_get logic for output GPIOs gpio_get() should return DATAIN register value when the GPIO is configured as input whereas it should return DATAOUT register value when the GPIO is configured as output. Now /sys/kernel/debug/gpio shows proper values for output GPIOs Signed-off-by: Roger Quadros <ext-roger.quadros@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com> --- arch/arm/plat-omap/gpio.c | 121 ++++++++++++++++++++++++++++++++++------------ 1 file changed, 89 insertions(+), 32 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 26b387c..9c16ca8 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -476,14 +476,12 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable) __raw_writel(l, reg); } -static int __omap_get_gpio_datain(int gpio) +static int _get_gpio_datain(struct gpio_bank *bank, int gpio) { - struct gpio_bank *bank; void __iomem *reg; if (check_gpio(gpio) < 0) return -EINVAL; - bank = get_gpio_bank(gpio); reg = bank->base; switch (bank->method) { #ifdef CONFIG_ARCH_OMAP1 @@ -524,6 +522,53 @@ static int __omap_get_gpio_datain(int gpio) & (1 << get_gpio_index(gpio))) != 0; } +static int _get_gpio_dataout(struct gpio_bank *bank, int gpio) +{ + void __iomem *reg; + + if (check_gpio(gpio) < 0) + return -EINVAL; + reg = bank->base; + + switch (bank->method) { +#ifdef CONFIG_ARCH_OMAP1 + case METHOD_MPUIO: + reg += OMAP_MPUIO_OUTPUT; + break; +#endif +#ifdef CONFIG_ARCH_OMAP15XX + case METHOD_GPIO_1510: + reg += OMAP1510_GPIO_DATA_OUTPUT; + break; +#endif +#ifdef CONFIG_ARCH_OMAP16XX + case METHOD_GPIO_1610: + reg += OMAP1610_GPIO_DATAOUT; + break; +#endif +#ifdef CONFIG_ARCH_OMAP730 + case METHOD_GPIO_730: + reg += OMAP730_GPIO_DATA_OUTPUT; + break; +#endif +#ifdef CONFIG_ARCH_OMAP850 + case METHOD_GPIO_850: + reg += OMAP850_GPIO_DATA_OUTPUT; + break; +#endif +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ + defined(CONFIG_ARCH_OMAP4) + case METHOD_GPIO_24XX: + reg += OMAP24XX_GPIO_DATAOUT; + break; +#endif + default: + return -EINVAL; + } + + return (__raw_readl(reg) & (1 << get_gpio_index(gpio))) != 0; +} + #define MOD_REG_BIT(reg, bit_mask, set) \ do { \ int l = __raw_readl(base + reg); \ @@ -1350,9 +1395,49 @@ static int gpio_input(struct gpio_chip *chip, unsigned offset) return 0; } +static int gpio_is_input(struct gpio_bank *bank, int mask) +{ + void __iomem *reg = bank->base; + + switch (bank->method) { + case METHOD_MPUIO: + reg += OMAP_MPUIO_IO_CNTL; + break; + case METHOD_GPIO_1510: + reg += OMAP1510_GPIO_DIR_CONTROL; + break; + case METHOD_GPIO_1610: + reg += OMAP1610_GPIO_DIRECTION; + break; + case METHOD_GPIO_730: + reg += OMAP730_GPIO_DIR_CONTROL; + break; + case METHOD_GPIO_850: + reg += OMAP850_GPIO_DIR_CONTROL; + break; + case METHOD_GPIO_24XX: + reg += OMAP24XX_GPIO_OE; + break; + } + return __raw_readl(reg) & mask; +} + static int gpio_get(struct gpio_chip *chip, unsigned offset) { - return __omap_get_gpio_datain(chip->base + offset); + struct gpio_bank *bank; + void __iomem *reg; + int gpio; + u32 mask; + + gpio = chip->base + offset; + bank = get_gpio_bank(gpio); + reg = bank->base; + mask = 1 << get_gpio_index(gpio); + + if (gpio_is_input(bank, mask)) + return _get_gpio_datain(bank, gpio); + else + return _get_gpio_dataout(bank, gpio); } static int gpio_output(struct gpio_chip *chip, unsigned offset, int value) @@ -1886,34 +1971,6 @@ arch_initcall(omap_gpio_sysinit); #include <linux/debugfs.h> #include <linux/seq_file.h> -static int gpio_is_input(struct gpio_bank *bank, int mask) -{ - void __iomem *reg = bank->base; - - switch (bank->method) { - case METHOD_MPUIO: - reg += OMAP_MPUIO_IO_CNTL; - break; - case METHOD_GPIO_1510: - reg += OMAP1510_GPIO_DIR_CONTROL; - break; - case METHOD_GPIO_1610: - reg += OMAP1610_GPIO_DIRECTION; - break; - case METHOD_GPIO_730: - reg += OMAP730_GPIO_DIR_CONTROL; - break; - case METHOD_GPIO_850: - reg += OMAP850_GPIO_DIR_CONTROL; - break; - case METHOD_GPIO_24XX: - reg += OMAP24XX_GPIO_OE; - break; - } - return __raw_readl(reg) & mask; -} - - static int dbg_gpio_show(struct seq_file *s, void *unused) { unsigned i, j, gpio; -- cgit v1.1 From 7cc515f74d2871daff106a17714bfd16bcb045ca Mon Sep 17 00:00:00 2001 From: Kevin Hilman <khilman@deeprootsystems.com> Date: Wed, 10 Jun 2009 09:02:25 -0700 Subject: OMAP2/3: PM: make PM __init calls static Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> --- arch/arm/mach-omap2/pm.h | 3 --- arch/arm/mach-omap2/pm24xx.c | 2 +- arch/arm/mach-omap2/pm34xx.c | 2 +- 3 files changed, 2 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index f7b3baf..21201cd 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -11,9 +11,6 @@ #ifndef __ARCH_ARM_MACH_OMAP2_PM_H #define __ARCH_ARM_MACH_OMAP2_PM_H -extern int omap2_pm_init(void); -extern int omap3_pm_init(void); - #ifdef CONFIG_PM_DEBUG extern void omap2_pm_dump(int mode, int resume, unsigned int us); extern int omap2_pm_debug; diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index db10255..528dbdc 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -470,7 +470,7 @@ static void __init prcm_setup_regs(void) WKUP_MOD, PM_WKEN); } -int __init omap2_pm_init(void) +static int __init omap2_pm_init(void) { u32 l; diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 841d4c5..765cdc0 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -652,7 +652,7 @@ static int __init clkdms_setup(struct clockdomain *clkdm) return 0; } -int __init omap3_pm_init(void) +static int __init omap3_pm_init(void) { struct power_state *pwrst, *tmp; int ret; -- cgit v1.1 From 364dd47466ff7a7749bf037df4bf3b7aedbfe6f4 Mon Sep 17 00:00:00 2001 From: Kevin Hilman <khilman@deeprootsystems.com> Date: Tue, 9 Jun 2009 11:45:30 -0700 Subject: OMAP3: PM: CM_REGADDR macros using wrong name Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> --- arch/arm/mach-omap2/cm.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h index 1d3c93b..f3c91a1 100644 --- a/arch/arm/mach-omap2/cm.h +++ b/arch/arm/mach-omap2/cm.h @@ -29,9 +29,9 @@ * These registers appear once per CM module. */ -#define OMAP3430_CM_REVISION OMAP_CM_REGADDR(OCP_MOD, 0x0000) -#define OMAP3430_CM_SYSCONFIG OMAP_CM_REGADDR(OCP_MOD, 0x0010) -#define OMAP3430_CM_POLCTRL OMAP_CM_REGADDR(OCP_MOD, 0x009c) +#define OMAP3430_CM_REVISION OMAP34XX_CM_REGADDR(OCP_MOD, 0x0000) +#define OMAP3430_CM_SYSCONFIG OMAP34XX_CM_REGADDR(OCP_MOD, 0x0010) +#define OMAP3430_CM_POLCTRL OMAP34XX_CM_REGADDR(OCP_MOD, 0x009c) #define OMAP3_CM_CLKOUT_CTRL_OFFSET 0x0070 #define OMAP3430_CM_CLKOUT_CTRL OMAP_CM_REGADDR(OMAP3430_CCR_MOD, 0x0070) -- cgit v1.1 From 3a6667acf916b3e32be4682196882fc2ed0ec23e Mon Sep 17 00:00:00 2001 From: Kevin Hilman <khilman@deeprootsystems.com> Date: Mon, 27 Apr 2009 07:50:23 -0700 Subject: OMAP3: PM: Ensure PRCM interrupts are cleared at boot Any pending PRCM interrupts can prevent retention. Ensure they are cleared during boot. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> --- arch/arm/mach-omap2/pm34xx.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 765cdc0..cc83dfc 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -613,6 +613,9 @@ static void __init prcm_setup_regs(void) /* Clear any pending PRCM interrupts */ prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); + /* Clear any pending PRCM interrupts */ + prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); + omap3_iva_idle(); omap3_d2d_idle(); } -- cgit v1.1 From 3a07ae30a0bfa93ff2b242acf670c6d8e2de35de Mon Sep 17 00:00:00 2001 From: Kevin Hilman <khilman@deeprootsystems.com> Date: Mon, 27 Apr 2009 16:14:54 -0700 Subject: OMAP3: PM: Clear pending PRCM reset flags on init Any pending reset flags can prevent retention. Ensure they are all cleared during boot. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> --- arch/arm/mach-omap2/pm34xx.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index cc83dfc..1422e93 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -613,6 +613,15 @@ static void __init prcm_setup_regs(void) /* Clear any pending PRCM interrupts */ prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); + /* Clear any pending 'reset' flags */ + prm_write_mod_reg(0xffffffff, MPU_MOD, RM_RSTST); + prm_write_mod_reg(0xffffffff, CORE_MOD, RM_RSTST); + prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, RM_RSTST); + prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, RM_RSTST); + prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, RM_RSTST); + prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, RM_RSTST); + prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD, RM_RSTST); + /* Clear any pending PRCM interrupts */ prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); -- cgit v1.1 From 040fed059c34da5115790609f1a038fc9aec88d1 Mon Sep 17 00:00:00 2001 From: Kevin Hilman <khilman@deeprootsystems.com> Date: Tue, 5 May 2009 16:34:25 -0700 Subject: OMAP3: PM: prevent module wakeups from waking IVA2 By default, prevent functional wakeups from inside a module from waking up the IVA2. Let DSP Bridge code handle this when loaded. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> --- arch/arm/mach-omap2/pm34xx.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 1422e93..c813a08 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -613,6 +613,12 @@ static void __init prcm_setup_regs(void) /* Clear any pending PRCM interrupts */ prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); + /* Don't attach IVA interrupts */ + prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL); + prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1); + prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3); + prm_write_mod_reg(0, OMAP3430_PER_MOD, OMAP3430_PM_IVAGRPSEL); + /* Clear any pending 'reset' flags */ prm_write_mod_reg(0xffffffff, MPU_MOD, RM_RSTST); prm_write_mod_reg(0xffffffff, CORE_MOD, RM_RSTST); -- cgit v1.1 From 10f90ed2d727c0f344d910c02c9726d0481d9b00 Mon Sep 17 00:00:00 2001 From: Kevin Hilman <khilman@deeprootsystems.com> Date: Wed, 24 Jun 2009 11:39:18 -0700 Subject: OMAP3: PM: Do not build suspend code if SUSPEND is not enabled Signed-off-by: Jouni Hogander <jouni.hogander@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> --- arch/arm/mach-omap2/pm34xx.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index c813a08..528f725 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -39,7 +39,9 @@ struct power_state { struct powerdomain *pwrdm; u32 next_state; +#ifdef CONFIG_SUSPEND u32 saved_state; +#endif struct list_head node; }; @@ -293,6 +295,7 @@ out: local_irq_enable(); } +#ifdef CONFIG_SUSPEND static int omap3_pm_prepare(void) { disable_hlt(); @@ -366,6 +369,7 @@ static struct platform_suspend_ops omap_pm_ops = { .finish = omap3_pm_finish, .valid = suspend_valid_only_mem, }; +#endif /* CONFIG_SUSPEND */ /** @@ -710,7 +714,9 @@ static int __init omap3_pm_init(void) _omap_sram_idle = omap_sram_push(omap34xx_cpu_suspend, omap34xx_cpu_suspend_sz); +#ifdef CONFIG_SUSPEND suspend_set_ops(&omap_pm_ops); +#endif /* CONFIG_SUSPEND */ pm_idle = omap3_pm_idle; -- cgit v1.1 From 4789998a30d845d94a7595076d1392ffd5a9d39e Mon Sep 17 00:00:00 2001 From: Kevin Hilman <khilman@deeprootsystems.com> Date: Wed, 24 Jun 2009 10:32:03 -0700 Subject: OMAP4: UART: cleanup special case IRQ handling Streamline the OMAP4 special IRQ assignments by putting inside normal init loop instead of having a separate loop. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> --- arch/arm/mach-omap2/serial.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index b094c15..c82ec95 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -496,10 +496,6 @@ void __init omap_serial_init(void) if (info == NULL) return; - if (cpu_is_omap44xx()) { - for (i = 0; i < OMAP_MAX_NR_PORTS; i++) - serial_platform_data[i].irq += 32; - } for (i = 0; i < OMAP_MAX_NR_PORTS; i++) { struct plat_serial8250_port *p = serial_platform_data + i; @@ -533,6 +529,9 @@ void __init omap_serial_init(void) uart->p = p; list_add(&uart->node, &uart_list); + if (cpu_is_omap44xx()) + p->irq += 32; + omap_uart_enable_clocks(uart); omap_uart_reset(uart); omap_uart_idle_init(uart); -- cgit v1.1 From 2466211e5debd205fc550d871fe0ab9b9a6d02ed Mon Sep 17 00:00:00 2001 From: Tero Kristo <tero.kristo@nokia.com> Date: Thu, 5 Mar 2009 16:32:23 +0200 Subject: OMAP3: Fixed crash bug with serial + suspend It was possible for an unhandled interrupt to occur if there was incoming serial traffic during wakeup from suspend. This was caused by the code in arch-arm/mach-omap2/serial.c keeping interrupt enabled all the time, but not acking its interrupts. Applies on top of PM branch. Use the PM begin/end hooks to ensure that the "serial idle" interrupts are disabled during the suspend path. Also, since begin/end hooks are now used, use the suspend_state that is passed in the begin hook instead of the enter hook as per the platform_suspend_ops docs. Signed-off-by: Tero Kristo <tero.kristo@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> --- arch/arm/mach-omap2/pm34xx.c | 23 +++++++++++++++++++++-- arch/arm/mach-omap2/serial.c | 14 ++++++++++++++ arch/arm/plat-omap/include/mach/serial.h | 1 + 3 files changed, 36 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 528f725..b07efb2 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -296,6 +296,8 @@ out: } #ifdef CONFIG_SUSPEND +static suspend_state_t suspend_state; + static int omap3_pm_prepare(void) { disable_hlt(); @@ -342,11 +344,11 @@ restore: return ret; } -static int omap3_pm_enter(suspend_state_t state) +static int omap3_pm_enter(suspend_state_t unused) { int ret = 0; - switch (state) { + switch (suspend_state) { case PM_SUSPEND_STANDBY: case PM_SUSPEND_MEM: ret = omap3_pm_suspend(); @@ -363,7 +365,24 @@ static void omap3_pm_finish(void) enable_hlt(); } +/* Hooks to enable / disable UART interrupts during suspend */ +static int omap3_pm_begin(suspend_state_t state) +{ + suspend_state = state; + omap_uart_enable_irqs(0); + return 0; +} + +static void omap3_pm_end(void) +{ + suspend_state = PM_SUSPEND_ON; + omap_uart_enable_irqs(1); + return; +} + static struct platform_suspend_ops omap_pm_ops = { + .begin = omap3_pm_begin, + .end = omap3_pm_end, .prepare = omap3_pm_prepare, .enter = omap3_pm_enter, .finish = omap3_pm_finish, diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index c82ec95..5352d05 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -435,6 +435,20 @@ static void omap_uart_idle_init(struct omap_uart_state *uart) WARN_ON(ret); } +void omap_uart_enable_irqs(int enable) +{ + int ret; + struct omap_uart_state *uart; + + list_for_each_entry(uart, &uart_list, node) { + if (enable) + ret = request_irq(uart->p->irq, omap_uart_interrupt, + IRQF_SHARED, "serial idle", (void *)uart); + else + free_irq(uart->p->irq, (void *)uart); + } +} + static ssize_t sleep_timeout_show(struct kobject *kobj, struct kobj_attribute *attr, char *buf) diff --git a/arch/arm/plat-omap/include/mach/serial.h b/arch/arm/plat-omap/include/mach/serial.h index 13abd02..def0529 100644 --- a/arch/arm/plat-omap/include/mach/serial.h +++ b/arch/arm/plat-omap/include/mach/serial.h @@ -59,6 +59,7 @@ extern void omap_uart_check_wakeup(void); extern void omap_uart_prepare_suspend(void); extern void omap_uart_prepare_idle(int num); extern void omap_uart_resume_idle(int num); +extern void omap_uart_enable_irqs(int enable); #endif #endif -- cgit v1.1 From fd455ea899b5a14a8cdd276e15f3b47696526f92 Mon Sep 17 00:00:00 2001 From: Kevin Hilman <khilman@deeprootsystems.com> Date: Mon, 27 Apr 2009 12:27:36 -0700 Subject: OMAP2/3/4: UART: Allow per-UART disabling wakeup for serial ports This patch causes the OMAP uarts to honor the sysfs power/wakeup file for IOPAD wakeups. Before the OMAP was always woken up from off mode on a rs232 signal change. This patch also creates a different platform device for each serial port so that the wakeup properties can be control per port. By default, IOPAD wakeups are enabled for each UART. To disable, # echo disabled > /sys/devices/platform/serial8250.0/power/wakeup Where serial8250.0 can be replaced by .1, or .2 to control the other ports. Original idea and original patch from Russ Dill <russ.dill@gmail.com> Cc: Russ Dill <russ.dill@gmail.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> --- arch/arm/mach-omap2/serial.c | 174 ++++++++++++++++++++++++++++--------------- 1 file changed, 116 insertions(+), 58 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 5352d05..6f35a7e 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -54,6 +54,7 @@ struct omap_uart_state { struct plat_serial8250_port *p; struct list_head node; + struct platform_device pdev; #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM) int context_valid; @@ -68,10 +69,9 @@ struct omap_uart_state { #endif }; -static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS]; static LIST_HEAD(uart_list); -static struct plat_serial8250_port serial_platform_data[] = { +static struct plat_serial8250_port serial_platform_data0[] = { { .membase = IO_ADDRESS(OMAP_UART1_BASE), .mapbase = OMAP_UART1_BASE, @@ -81,6 +81,12 @@ static struct plat_serial8250_port serial_platform_data[] = { .regshift = 2, .uartclk = OMAP24XX_BASE_BAUD * 16, }, { + .flags = 0 + } +}; + +static struct plat_serial8250_port serial_platform_data1[] = { + { .membase = IO_ADDRESS(OMAP_UART2_BASE), .mapbase = OMAP_UART2_BASE, .irq = 73, @@ -89,6 +95,12 @@ static struct plat_serial8250_port serial_platform_data[] = { .regshift = 2, .uartclk = OMAP24XX_BASE_BAUD * 16, }, { + .flags = 0 + } +}; + +static struct plat_serial8250_port serial_platform_data2[] = { + { .membase = IO_ADDRESS(OMAP_UART3_BASE), .mapbase = OMAP_UART3_BASE, .irq = 74, @@ -217,6 +229,40 @@ static inline void omap_uart_disable_clocks(struct omap_uart_state *uart) clk_disable(uart->fck); } +static void omap_uart_enable_wakeup(struct omap_uart_state *uart) +{ + /* Set wake-enable bit */ + if (uart->wk_en && uart->wk_mask) { + u32 v = __raw_readl(uart->wk_en); + v |= uart->wk_mask; + __raw_writel(v, uart->wk_en); + } + + /* Ensure IOPAD wake-enables are set */ + if (cpu_is_omap34xx() && uart->padconf) { + u16 v = omap_ctrl_readw(uart->padconf); + v |= OMAP3_PADCONF_WAKEUPENABLE0; + omap_ctrl_writew(v, uart->padconf); + } +} + +static void omap_uart_disable_wakeup(struct omap_uart_state *uart) +{ + /* Clear wake-enable bit */ + if (uart->wk_en && uart->wk_mask) { + u32 v = __raw_readl(uart->wk_en); + v &= ~uart->wk_mask; + __raw_writel(v, uart->wk_en); + } + + /* Ensure IOPAD wake-enables are cleared */ + if (cpu_is_omap34xx() && uart->padconf) { + u16 v = omap_ctrl_readw(uart->padconf); + v &= ~OMAP3_PADCONF_WAKEUPENABLE0; + omap_ctrl_writew(v, uart->padconf); + } +} + static void omap_uart_smart_idle_enable(struct omap_uart_state *uart, int enable) { @@ -246,6 +292,11 @@ static void omap_uart_block_sleep(struct omap_uart_state *uart) static void omap_uart_allow_sleep(struct omap_uart_state *uart) { + if (device_may_wakeup(&uart->pdev.dev)) + omap_uart_enable_wakeup(uart); + else + omap_uart_disable_wakeup(uart); + if (!uart->clocked) return; @@ -292,7 +343,6 @@ void omap_uart_resume_idle(int num) /* Check for normal UART wakeup */ if (__raw_readl(uart->wk_st) & uart->wk_mask) omap_uart_block_sleep(uart); - return; } } @@ -346,16 +396,13 @@ static irqreturn_t omap_uart_interrupt(int irq, void *dev_id) return IRQ_NONE; } -static u32 sleep_timeout = DEFAULT_TIMEOUT; - static void omap_uart_idle_init(struct omap_uart_state *uart) { - u32 v; struct plat_serial8250_port *p = uart->p; int ret; uart->can_sleep = 0; - uart->timeout = sleep_timeout; + uart->timeout = DEFAULT_TIMEOUT; setup_timer(&uart->timer, omap_uart_idle_timer, (unsigned long) uart); mod_timer(&uart->timer, jiffies + uart->timeout); @@ -413,22 +460,6 @@ static void omap_uart_idle_init(struct omap_uart_state *uart) uart->padconf = 0; } - /* Set wake-enable bit */ - if (uart->wk_en && uart->wk_mask) { - v = __raw_readl(uart->wk_en); - v |= uart->wk_mask; - __raw_writel(v, uart->wk_en); - } - - /* Ensure IOPAD wake-enables are set */ - if (cpu_is_omap34xx() && uart->padconf) { - u16 v; - - v = omap_ctrl_readw(uart->padconf); - v |= OMAP3_PADCONF_WAKEUPENABLE0; - omap_ctrl_writew(v, uart->padconf); - } - p->flags |= UPF_SHARE_IRQ; ret = request_irq(p->irq, omap_uart_interrupt, IRQF_SHARED, "serial idle", (void *)uart); @@ -449,54 +480,81 @@ void omap_uart_enable_irqs(int enable) } } -static ssize_t sleep_timeout_show(struct kobject *kobj, - struct kobj_attribute *attr, +static ssize_t sleep_timeout_show(struct device *dev, + struct device_attribute *attr, char *buf) { - return sprintf(buf, "%u\n", sleep_timeout / HZ); + struct platform_device *pdev = container_of(dev, + struct platform_device, dev); + struct omap_uart_state *uart = container_of(pdev, + struct omap_uart_state, pdev); + + return sprintf(buf, "%u\n", uart->timeout / HZ); } -static ssize_t sleep_timeout_store(struct kobject *kobj, - struct kobj_attribute *attr, +static ssize_t sleep_timeout_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t n) { - struct omap_uart_state *uart; + struct platform_device *pdev = container_of(dev, + struct platform_device, dev); + struct omap_uart_state *uart = container_of(pdev, + struct omap_uart_state, pdev); unsigned int value; if (sscanf(buf, "%u", &value) != 1) { printk(KERN_ERR "sleep_timeout_store: Invalid value\n"); return -EINVAL; } - sleep_timeout = value * HZ; - list_for_each_entry(uart, &uart_list, node) { - uart->timeout = sleep_timeout; - if (uart->timeout) - mod_timer(&uart->timer, jiffies + uart->timeout); - else - /* A zero value means disable timeout feature */ - omap_uart_block_sleep(uart); - } + + uart->timeout = value * HZ; + if (uart->timeout) + mod_timer(&uart->timer, jiffies + uart->timeout); + else + /* A zero value means disable timeout feature */ + omap_uart_block_sleep(uart); + return n; } -static struct kobj_attribute sleep_timeout_attr = - __ATTR(sleep_timeout, 0644, sleep_timeout_show, sleep_timeout_store); - +DEVICE_ATTR(sleep_timeout, 0644, sleep_timeout_show, sleep_timeout_store); +#define DEV_CREATE_FILE(dev, attr) WARN_ON(device_create_file(dev, attr)) #else static inline void omap_uart_idle_init(struct omap_uart_state *uart) {} +#define DEV_CREATE_FILE(dev, attr) #endif /* CONFIG_PM */ -static struct platform_device serial_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = serial_platform_data, +static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS] = { + { + .pdev = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = serial_platform_data0, + }, + }, + }, { + .pdev = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM1, + .dev = { + .platform_data = serial_platform_data1, + }, + }, + }, { + .pdev = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM2, + .dev = { + .platform_data = serial_platform_data2, + }, + }, }, }; void __init omap_serial_init(void) { - int i, err; + int i; const struct omap_uart_config *info; char name[16]; @@ -512,8 +570,10 @@ void __init omap_serial_init(void) return; for (i = 0; i < OMAP_MAX_NR_PORTS; i++) { - struct plat_serial8250_port *p = serial_platform_data + i; struct omap_uart_state *uart = &omap_uart[i]; + struct platform_device *pdev = &uart->pdev; + struct device *dev = &pdev->dev; + struct plat_serial8250_port *p = dev->platform_data; if (!(info->enabled_uarts & (1 << i))) { p->membase = NULL; @@ -549,15 +609,13 @@ void __init omap_serial_init(void) omap_uart_enable_clocks(uart); omap_uart_reset(uart); omap_uart_idle_init(uart); - } - - err = platform_device_register(&serial_device); - -#ifdef CONFIG_PM - if (!err) - err = sysfs_create_file(&serial_device.dev.kobj, - &sleep_timeout_attr.attr); -#endif + if (WARN_ON(platform_device_register(pdev))) + continue; + if ((cpu_is_omap34xx() && uart->padconf) || + (uart->wk_en && uart->wk_mask)) { + device_init_wakeup(dev, true); + DEV_CREATE_FILE(dev, &dev_attr_sleep_timeout); + } + } } - -- cgit v1.1 From bcf396c48012a5e4c7ab77be5c40df10d6bdb8ad Mon Sep 17 00:00:00 2001 From: Kevin Hilman <khilman@deeprootsystems.com> Date: Tue, 30 Jun 2009 21:02:45 -0700 Subject: OMAP2/3/4: UART: allow in-order port traversal Use list_add_tail() when adding discovered UART ports. This is so traversal using list_for_each_entry() will traverse the list in the order they were found. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> --- arch/arm/mach-omap2/serial.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 6f35a7e..a7421a5 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -601,7 +601,7 @@ void __init omap_serial_init(void) uart->num = i; p->private_data = uart; uart->p = p; - list_add(&uart->node, &uart_list); + list_add_tail(&uart->node, &uart_list); if (cpu_is_omap44xx()) p->irq += 32; -- cgit v1.1 From 60c45ae1107c4ec47d2c84e5984ea59d02b2863d Mon Sep 17 00:00:00 2001 From: Eero Nurkkala <ext-eero.nurkkala@nokia.com> Date: Tue, 23 Jun 2009 12:53:29 +0300 Subject: OMAP: PM: CPUfreq: obey min/max settings of policy Use the min/max settings from CPUfreq policy rather than processor defined min/max settings. Without this patch, it's possible to scale frequency outside the current policy range. Signed-off-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> --- arch/arm/plat-omap/cpu-omap.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c index 843e8af..1868c0d 100644 --- a/arch/arm/plat-omap/cpu-omap.c +++ b/arch/arm/plat-omap/cpu-omap.c @@ -78,10 +78,10 @@ static int omap_target(struct cpufreq_policy *policy, /* Ensure desired rate is within allowed range. Some govenors * (ondemand) will just pass target_freq=0 to get the minimum. */ - if (target_freq < policy->cpuinfo.min_freq) - target_freq = policy->cpuinfo.min_freq; - if (target_freq > policy->cpuinfo.max_freq) - target_freq = policy->cpuinfo.max_freq; + if (target_freq < policy->min) + target_freq = policy->min; + if (target_freq > policy->max) + target_freq = policy->max; freqs.old = omap_getspeed(0); freqs.new = clk_round_rate(mpu_clk, target_freq * 1000) / 1000; -- cgit v1.1 From 6c5f80393b107b0c9e2a54b03b65d1880e706655 Mon Sep 17 00:00:00 2001 From: Jouni Hogander <jouni.hogander@nokia.com> Date: Wed, 29 Oct 2008 12:06:04 +0200 Subject: OMAP3: PM: Fix wrong sequence in suspend. Powerdomain previous state is checked after restoring new states in suspend. This patch fixes this problem. Signed-off-by: Jouni Hogander <jouni.hogander@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> --- arch/arm/mach-omap2/pm34xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index b07efb2..488d595 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -326,7 +326,6 @@ static int omap3_pm_suspend(void) restore: /* Restore next_pwrsts */ list_for_each_entry(pwrst, &pwrst_list, node) { - set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state); state = pwrdm_read_prev_pwrst(pwrst->pwrdm); if (state > pwrst->next_state) { printk(KERN_INFO "Powerdomain (%s) didn't enter " @@ -334,6 +333,7 @@ restore: pwrst->pwrdm->name, pwrst->next_state); ret = -1; } + set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state); } if (ret) printk(KERN_ERR "Could not enter target state in pm_suspend\n"); -- cgit v1.1 From 55b6019ae29456e0f1e4087546bf4221c48622a0 Mon Sep 17 00:00:00 2001 From: Kevin Hilman <khilman@deeprootsystems.com> Date: Thu, 4 Jun 2009 15:57:10 -0700 Subject: OMAP: GPIO: clear/restore level/edge detect settings on mask/unmask If IRQ triggering is enabled, it can trigger a pending interrupt even for masked interrupts. Any pending GPIO interrupts can prevent the powerdomain from hitting retention. Problem found, reported and additional review and testing by Chunquiu Wang. Tested-by: Chunquiu Wang <cqwang@motorola.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> --- arch/arm/plat-omap/gpio.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 26b387c..77bad14 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -1189,6 +1189,7 @@ static void gpio_mask_irq(unsigned int irq) struct gpio_bank *bank = get_irq_chip_data(irq); _set_gpio_irqenable(bank, gpio, 0); + _set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE); } static void gpio_unmask_irq(unsigned int irq) @@ -1196,6 +1197,11 @@ static void gpio_unmask_irq(unsigned int irq) unsigned int gpio = irq - IH_GPIO_BASE; struct gpio_bank *bank = get_irq_chip_data(irq); unsigned int irq_mask = 1 << get_gpio_index(gpio); + struct irq_desc *desc = irq_to_desc(irq); + u32 trigger = desc->status & IRQ_TYPE_SENSE_MASK; + + if (trigger) + _set_gpio_triggering(bank, get_gpio_index(gpio), trigger); /* For level-triggered GPIOs, the clearing must be done after * the HW source is cleared, thus after the handler has run */ -- cgit v1.1 From 6fd210a9cc398ecbff7bcdbe220651b73b654f56 Mon Sep 17 00:00:00 2001 From: Kevin Hilman <khilman@deeprootsystems.com> Date: Mon, 20 Jul 2009 09:09:23 -0700 Subject: OMAP3: Overo: add missing pen-down GPIO definition Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> --- arch/arm/mach-omap2/board-overo.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index dff5528..e26af83 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -51,6 +51,7 @@ #define OVERO_GPIO_BT_XGATE 15 #define OVERO_GPIO_W2W_NRESET 16 +#define OVERO_GPIO_PENDOWN 114 #define OVERO_GPIO_BT_NRESET 164 #define OVERO_GPIO_USBH_CPEN 168 #define OVERO_GPIO_USBH_NRESET 183 -- cgit v1.1 From 0a51810aa058a0a4ac76dd6f87f4d10bee774e2e Mon Sep 17 00:00:00 2001 From: Andrew Victor <linux@maxim.org.za> Date: Tue, 4 Aug 2009 19:55:56 +0100 Subject: ARM: 5637/1: [KS8695] Don't reference CLOCK_TICK_RATE in drivers Stop referencing CLOCK_TICK_RATE in the KS8695 drivers, rather refer to a KS8695_CLOCK_RATE. Issue pointed out by Russell King on arm-linux-kernel mailing list. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> --- arch/arm/mach-ks8695/include/mach/hardware.h | 5 +++++ arch/arm/mach-ks8695/include/mach/timex.h | 5 +++-- 2 files changed, 8 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-ks8695/include/mach/hardware.h b/arch/arm/mach-ks8695/include/mach/hardware.h index 1d640d0..e0f911d 100644 --- a/arch/arm/mach-ks8695/include/mach/hardware.h +++ b/arch/arm/mach-ks8695/include/mach/hardware.h @@ -17,6 +17,11 @@ #include <asm/sizes.h> /* + * Clocks are derived from MCLK, which is 25Mhz + */ +#define KS8695_CLOCK_RATE 25000000 + +/* * Physical RAM address. */ #define KS8695_SDRAM_PA 0x00000000 diff --git a/arch/arm/mach-ks8695/include/mach/timex.h b/arch/arm/mach-ks8695/include/mach/timex.h index 4682e35..10f7163 100644 --- a/arch/arm/mach-ks8695/include/mach/timex.h +++ b/arch/arm/mach-ks8695/include/mach/timex.h @@ -14,7 +14,8 @@ #ifndef __ASM_ARCH_TIMEX_H #define __ASM_ARCH_TIMEX_H -/* timers are derived from MCLK, which is 25MHz */ -#define CLOCK_TICK_RATE 25000000 +#include <mach/hardware.h> + +#define CLOCK_TICK_RATE KS8695_CLOCK_RATE #endif -- cgit v1.1 From 65a5053b764a42d33b334ba55810bb5b56eb92df Mon Sep 17 00:00:00 2001 From: Hartley Sweeten <hartleys@visionengravers.com> Date: Tue, 4 Aug 2009 23:20:45 +0100 Subject: ARM: 5638/1: arch/arm/kernel/signal.c: use correct address space for CRUNCH preserve_crunch_context() calls __copy_to_user() which expects the destination address to be in __user space. setup_sigframe() properly passes the destination address. restore_crunch_context() calls __copy_from_user() which expects the source address to be in __user space. restore_sigframe() properly passes the source address. This fixes {preserve/restore}_crunch_context() to accept the address as __user space and resolves the following sparse warnings: arch/arm/kernel/signal.c:146:31: warning: incorrect type in argument 1 (different address spaces) expected void [noderef] <asn:1>*to got struct crunch_sigframe *frame arch/arm/kernel/signal.c:156:38: warning: incorrect type in argument 2 (different address spaces) expected void const [noderef] <asn:1>*from got struct crunch_sigframe *frame arch/arm/kernel/signal.c:250:48: warning: incorrect type in argument 1 (different address spaces) expected struct crunch_sigframe *frame got struct crunch_sigframe [noderef] <asn:1>*<noident> arch/arm/kernel/signal.c:365:49: warning: incorrect type in argument 1 (different address spaces) expected struct crunch_sigframe *frame got struct crunch_sigframe [noderef] <asn:1>*<noident> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> --- arch/arm/kernel/signal.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index 93bb424..f6bc5d4 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -133,7 +133,7 @@ sys_sigaction(int sig, const struct old_sigaction __user *act, } #ifdef CONFIG_CRUNCH -static int preserve_crunch_context(struct crunch_sigframe *frame) +static int preserve_crunch_context(struct crunch_sigframe __user *frame) { char kbuf[sizeof(*frame) + 8]; struct crunch_sigframe *kframe; @@ -146,7 +146,7 @@ static int preserve_crunch_context(struct crunch_sigframe *frame) return __copy_to_user(frame, kframe, sizeof(*frame)); } -static int restore_crunch_context(struct crunch_sigframe *frame) +static int restore_crunch_context(struct crunch_sigframe __user *frame) { char kbuf[sizeof(*frame) + 8]; struct crunch_sigframe *kframe; -- cgit v1.1 From c0c60c4b9ab45bb02b20796401dd6a90770fd0ee Mon Sep 17 00:00:00 2001 From: Hartley Sweeten <hartleys@visionengravers.com> Date: Tue, 4 Aug 2009 23:38:06 +0100 Subject: ARM: 5639/1: arm: clkdev.c should include <linux/clk.h> <linux/clk.h> should be included to get the base API prototypes. This fixes the following sparse warnings: arch/arm/common/clkdev.c:65:12: warning: symbol 'clk_get_sys' was not declared. Should it be static? arch/arm/common/clkdev.c:79:12: warning: symbol 'clk_get' was not declared. Should it be static? arch/arm/common/clkdev.c:87:6: warning: symbol 'clk_put' was not declared. Should it be static? Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> --- arch/arm/common/clkdev.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/common/clkdev.c b/arch/arm/common/clkdev.c index f37afd9..aae5bc0 100644 --- a/arch/arm/common/clkdev.c +++ b/arch/arm/common/clkdev.c @@ -17,6 +17,7 @@ #include <linux/err.h> #include <linux/string.h> #include <linux/mutex.h> +#include <linux/clk.h> #include <asm/clkdev.h> #include <mach/clkdev.h> -- cgit v1.1 From 07868b086cca784f4b532fc2ab574ec3a73b468a Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker <fweisbec@gmail.com> Date: Wed, 29 Jul 2009 03:33:51 +0200 Subject: tracing/function-graph-tracer: Drop the useless nmi protection The function graph tracer used to have a protection against NMI while entering a function entry tracing. But this is useless now, this tracer is reentrant and the ring buffer supports the NMI tracing. We can then drop this protection. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> --- arch/x86/kernel/ftrace.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c index d94e1ea..8e96634 100644 --- a/arch/x86/kernel/ftrace.c +++ b/arch/x86/kernel/ftrace.c @@ -417,10 +417,6 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr, unsigned long return_hooker = (unsigned long) &return_to_handler; - /* Nmi's are currently unsupported */ - if (unlikely(in_nmi())) - return; - if (unlikely(atomic_read(¤t->tracing_graph_pause))) return; -- cgit v1.1 From 53a27b39ff4d2492f84b1fdc2f0047175f0b0b93 Mon Sep 17 00:00:00 2001 From: Marcelo Tosatti <mtosatti@redhat.com> Date: Wed, 5 Aug 2009 15:43:58 -0300 Subject: KVM: MMU: limit rmap chain length Otherwise the host can spend too long traversing an rmap chain, which happens under a spinlock. Cc: stable@kernel.org Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com> --- arch/x86/kvm/mmu.c | 33 ++++++++++++++++++++++++++++----- 1 file changed, 28 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index 49a10d0..0ef5bb2 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -489,16 +489,20 @@ static unsigned long *gfn_to_rmap(struct kvm *kvm, gfn_t gfn, int lpage) * * If rmapp bit zero is one, (then rmap & ~1) points to a struct kvm_rmap_desc * containing more mappings. + * + * Returns the number of rmap entries before the spte was added or zero if + * the spte was not added. + * */ -static void rmap_add(struct kvm_vcpu *vcpu, u64 *spte, gfn_t gfn, int lpage) +static int rmap_add(struct kvm_vcpu *vcpu, u64 *spte, gfn_t gfn, int lpage) { struct kvm_mmu_page *sp; struct kvm_rmap_desc *desc; unsigned long *rmapp; - int i; + int i, count = 0; if (!is_rmap_pte(*spte)) - return; + return count; gfn = unalias_gfn(vcpu->kvm, gfn); sp = page_header(__pa(spte)); sp->gfns[spte - sp->spt] = gfn; @@ -515,8 +519,10 @@ static void rmap_add(struct kvm_vcpu *vcpu, u64 *spte, gfn_t gfn, int lpage) } else { rmap_printk("rmap_add: %p %llx many->many\n", spte, *spte); desc = (struct kvm_rmap_desc *)(*rmapp & ~1ul); - while (desc->shadow_ptes[RMAP_EXT-1] && desc->more) + while (desc->shadow_ptes[RMAP_EXT-1] && desc->more) { desc = desc->more; + count += RMAP_EXT; + } if (desc->shadow_ptes[RMAP_EXT-1]) { desc->more = mmu_alloc_rmap_desc(vcpu); desc = desc->more; @@ -525,6 +531,7 @@ static void rmap_add(struct kvm_vcpu *vcpu, u64 *spte, gfn_t gfn, int lpage) ; desc->shadow_ptes[i] = spte; } + return count; } static void rmap_desc_remove_entry(unsigned long *rmapp, @@ -754,6 +761,19 @@ static int kvm_age_rmapp(struct kvm *kvm, unsigned long *rmapp) return young; } +#define RMAP_RECYCLE_THRESHOLD 1000 + +static void rmap_recycle(struct kvm_vcpu *vcpu, gfn_t gfn, int lpage) +{ + unsigned long *rmapp; + + gfn = unalias_gfn(vcpu->kvm, gfn); + rmapp = gfn_to_rmap(vcpu->kvm, gfn, lpage); + + kvm_unmap_rmapp(vcpu->kvm, rmapp); + kvm_flush_remote_tlbs(vcpu->kvm); +} + int kvm_age_hva(struct kvm *kvm, unsigned long hva) { return kvm_handle_hva(kvm, hva, kvm_age_rmapp); @@ -1741,6 +1761,7 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *shadow_pte, { int was_rmapped = 0; int was_writeble = is_writeble_pte(*shadow_pte); + int rmap_count; pgprintk("%s: spte %llx access %x write_fault %d" " user_fault %d gfn %lx\n", @@ -1782,9 +1803,11 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *shadow_pte, page_header_update_slot(vcpu->kvm, shadow_pte, gfn); if (!was_rmapped) { - rmap_add(vcpu, shadow_pte, gfn, largepage); + rmap_count = rmap_add(vcpu, shadow_pte, gfn, largepage); if (!is_rmap_pte(*shadow_pte)) kvm_release_pfn_clean(pfn); + if (rmap_count > RMAP_RECYCLE_THRESHOLD) + rmap_recycle(vcpu, gfn, largepage); } else { if (was_writeble) kvm_release_pfn_dirty(pfn); -- cgit v1.1 From e0d82a0a4e9841b787e6431ccfbb515546c55dc2 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt <benh@kernel.crashing.org> Date: Thu, 6 Aug 2009 21:16:44 +1000 Subject: perf_counter/powerpc: Check oprofile_cpu_type for NULL before using it If the current CPU doesn't support performance counters, cur_cpu_spec->oprofile_cpu_type can be NULL. The current perf_counter modules don't test for that case and would thus crash at boot time. Bug reported by David Woodhouse. Reported-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Paul Mackerras <paulus@samba.org> LKML-Reference: <19066.48028.446975.501454@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/powerpc/kernel/mpc7450-pmu.c | 3 ++- arch/powerpc/kernel/power4-pmu.c | 3 ++- arch/powerpc/kernel/power5+-pmu.c | 5 +++-- arch/powerpc/kernel/power5-pmu.c | 3 ++- arch/powerpc/kernel/power6-pmu.c | 3 ++- arch/powerpc/kernel/power7-pmu.c | 3 ++- arch/powerpc/kernel/ppc970-pmu.c | 5 +++-- 7 files changed, 16 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/mpc7450-pmu.c b/arch/powerpc/kernel/mpc7450-pmu.c index c244133..cc466d0 100644 --- a/arch/powerpc/kernel/mpc7450-pmu.c +++ b/arch/powerpc/kernel/mpc7450-pmu.c @@ -407,7 +407,8 @@ struct power_pmu mpc7450_pmu = { static int init_mpc7450_pmu(void) { - if (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc/7450")) + if (!cur_cpu_spec->oprofile_cpu_type || + strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc/7450")) return -ENODEV; return register_power_pmu(&mpc7450_pmu); diff --git a/arch/powerpc/kernel/power4-pmu.c b/arch/powerpc/kernel/power4-pmu.c index db90b0c..3c90a3d 100644 --- a/arch/powerpc/kernel/power4-pmu.c +++ b/arch/powerpc/kernel/power4-pmu.c @@ -606,7 +606,8 @@ static struct power_pmu power4_pmu = { static int init_power4_pmu(void) { - if (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power4")) + if (!cur_cpu_spec->oprofile_cpu_type || + strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power4")) return -ENODEV; return register_power_pmu(&power4_pmu); diff --git a/arch/powerpc/kernel/power5+-pmu.c b/arch/powerpc/kernel/power5+-pmu.c index f4adca8..31918af 100644 --- a/arch/powerpc/kernel/power5+-pmu.c +++ b/arch/powerpc/kernel/power5+-pmu.c @@ -678,8 +678,9 @@ static struct power_pmu power5p_pmu = { static int init_power5p_pmu(void) { - if (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power5+") - && strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power5++")) + if (!cur_cpu_spec->oprofile_cpu_type || + (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power5+") + && strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power5++"))) return -ENODEV; return register_power_pmu(&power5p_pmu); diff --git a/arch/powerpc/kernel/power5-pmu.c b/arch/powerpc/kernel/power5-pmu.c index 29b2c6c..867f6f6 100644 --- a/arch/powerpc/kernel/power5-pmu.c +++ b/arch/powerpc/kernel/power5-pmu.c @@ -618,7 +618,8 @@ static struct power_pmu power5_pmu = { static int init_power5_pmu(void) { - if (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power5")) + if (!cur_cpu_spec->oprofile_cpu_type || + strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power5")) return -ENODEV; return register_power_pmu(&power5_pmu); diff --git a/arch/powerpc/kernel/power6-pmu.c b/arch/powerpc/kernel/power6-pmu.c index 09ae5bf..fa21890 100644 --- a/arch/powerpc/kernel/power6-pmu.c +++ b/arch/powerpc/kernel/power6-pmu.c @@ -537,7 +537,8 @@ static struct power_pmu power6_pmu = { static int init_power6_pmu(void) { - if (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power6")) + if (!cur_cpu_spec->oprofile_cpu_type || + strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power6")) return -ENODEV; return register_power_pmu(&power6_pmu); diff --git a/arch/powerpc/kernel/power7-pmu.c b/arch/powerpc/kernel/power7-pmu.c index 5a9f5cb..388cf57 100644 --- a/arch/powerpc/kernel/power7-pmu.c +++ b/arch/powerpc/kernel/power7-pmu.c @@ -366,7 +366,8 @@ static struct power_pmu power7_pmu = { static int init_power7_pmu(void) { - if (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power7")) + if (!cur_cpu_spec->oprofile_cpu_type || + strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power7")) return -ENODEV; return register_power_pmu(&power7_pmu); diff --git a/arch/powerpc/kernel/ppc970-pmu.c b/arch/powerpc/kernel/ppc970-pmu.c index 833097a..75dccb7 100644 --- a/arch/powerpc/kernel/ppc970-pmu.c +++ b/arch/powerpc/kernel/ppc970-pmu.c @@ -488,8 +488,9 @@ static struct power_pmu ppc970_pmu = { static int init_ppc970_pmu(void) { - if (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/970") - && strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/970MP")) + if (!cur_cpu_spec->oprofile_cpu_type || + (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/970") + && strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/970MP"))) return -ENODEV; return register_power_pmu(&ppc970_pmu); -- cgit v1.1 From 677c1dd706d9cc384730cbd52baf821923d8be9b Mon Sep 17 00:00:00 2001 From: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Date: Fri, 7 Aug 2009 10:39:24 +0200 Subject: [S390] kernel: Storing machine flags early in lowcore Currently, the machine_flags are stored late in the startup initialization which results in failing machine type checks (e.g. for MACHINE_IS_VM). To allow these checks, store the machine flags in the lowcore when the machine type has been detected. Moving the machine_flags to the lowcore has been introduced with git commit 25097bf153391f7be4c591d47061b3dc4990dac2 Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> --- arch/s390/kernel/early.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c index 8d15314..cae14c4 100644 --- a/arch/s390/kernel/early.c +++ b/arch/s390/kernel/early.c @@ -208,6 +208,9 @@ static noinline __init void detect_machine_type(void) machine_flags |= MACHINE_FLAG_KVM; else machine_flags |= MACHINE_FLAG_VM; + + /* Store machine flags for setting up lowcore early */ + S390_lowcore.machine_flags = machine_flags; } static __init void early_pgm_check_handler(void) -- cgit v1.1 From 53cb780adbe69df90c8dc23e992ce40455e687c3 Mon Sep 17 00:00:00 2001 From: Roel Kluin <roel.kluin@gmail.com> Date: Fri, 7 Aug 2009 10:39:25 +0200 Subject: [S390] KVM: Read buffer overflow Check whether index is within bounds before testing the element. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> --- arch/s390/kvm/sigp.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/s390/kvm/sigp.c b/arch/s390/kvm/sigp.c index 3667883..0ef81d6 100644 --- a/arch/s390/kvm/sigp.c +++ b/arch/s390/kvm/sigp.c @@ -169,7 +169,7 @@ static int __sigp_set_prefix(struct kvm_vcpu *vcpu, u16 cpu_addr, u32 address, unsigned long *reg) { struct kvm_s390_float_interrupt *fi = &vcpu->kvm->arch.float_int; - struct kvm_s390_local_interrupt *li; + struct kvm_s390_local_interrupt *li = NULL; struct kvm_s390_interrupt_info *inti; int rc; u8 tmp; @@ -189,9 +189,10 @@ static int __sigp_set_prefix(struct kvm_vcpu *vcpu, u16 cpu_addr, u32 address, return 2; /* busy */ spin_lock(&fi->lock); - li = fi->local_int[cpu_addr]; + if (cpu_addr < KVM_MAX_VCPUS) + li = fi->local_int[cpu_addr]; - if ((cpu_addr >= KVM_MAX_VCPUS) || (li == NULL)) { + if (li == NULL) { rc = 1; /* incorrect state */ *reg &= SIGP_STAT_INCORRECT_STATE; kfree(inti); -- cgit v1.1 From e8e2ff462dd92693f29eb848f42d3eb720390d59 Mon Sep 17 00:00:00 2001 From: "Gupta, Ajay Kumar" <ajay.gupta@ti.com> Date: Wed, 29 Jul 2009 11:58:57 +0530 Subject: USB: musb: fix the nop registration for OMAP3EVM OMAP3EVM uses ISP1504 phy which doesn't require any programming and thus has to use NOP otg transceiver. Cleanups being done: - Remove unwanted code in usb-musb.c file - Register NOP in OMAP3EVM board file using usb_nop_xceiv_register(). - Select NOP_USB_XCEIV for OMAP3EVM boards. - Don't enable TWL4030_USB in omap3_evm_defconfig Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Eino-Ville Talvala <talvala@stanford.edu> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> --- arch/arm/configs/omap3_evm_defconfig | 2 +- arch/arm/mach-omap2/board-omap3evm.c | 5 +++++ arch/arm/mach-omap2/usb-musb.c | 21 --------------------- 3 files changed, 6 insertions(+), 22 deletions(-) (limited to 'arch') diff --git a/arch/arm/configs/omap3_evm_defconfig b/arch/arm/configs/omap3_evm_defconfig index 28be17f..d5ff477 100644 --- a/arch/arm/configs/omap3_evm_defconfig +++ b/arch/arm/configs/omap3_evm_defconfig @@ -1107,7 +1107,7 @@ CONFIG_USB_ZERO=m CONFIG_USB_OTG_UTILS=y # CONFIG_USB_GPIO_VBUS is not set # CONFIG_ISP1301_OMAP is not set -CONFIG_TWL4030_USB=y +# CONFIG_TWL4030_USB is not set # CONFIG_NOP_USB_XCEIV is not set CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index d3cc145..cf3dd77 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -25,6 +25,7 @@ #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> #include <linux/i2c/twl4030.h> +#include <linux/usb/otg.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -307,6 +308,10 @@ static void __init omap3_evm_init(void) ARRAY_SIZE(omap3evm_spi_board_info)); omap_serial_init(); +#ifdef CONFIG_NOP_USB_XCEIV + /* OMAP3EVM uses ISP1504 phy and so register nop transceiver */ + usb_nop_xceiv_register(); +#endif usb_musb_init(); ads7846_dev_init(); } diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index d85296d..739e59e 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -155,20 +155,6 @@ static struct platform_device musb_device = { .resource = musb_resources, }; -#ifdef CONFIG_NOP_USB_XCEIV -static u64 nop_xceiv_dmamask = DMA_BIT_MASK(32); - -static struct platform_device nop_xceiv_device = { - .name = "nop_usb_xceiv", - .id = -1, - .dev = { - .dma_mask = &nop_xceiv_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = NULL, - }, -}; -#endif - void __init usb_musb_init(void) { if (cpu_is_omap243x()) @@ -183,13 +169,6 @@ void __init usb_musb_init(void) */ musb_plat.clock = "ick"; -#ifdef CONFIG_NOP_USB_XCEIV - if (platform_device_register(&nop_xceiv_device) < 0) { - printk(KERN_ERR "Unable to register NOP-XCEIV device\n"); - return; - } -#endif - if (platform_device_register(&musb_device) < 0) { printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n"); return; -- cgit v1.1 From 087d7e56deffb611a098e7e257388a41edbeef1f Mon Sep 17 00:00:00 2001 From: Yinghai Lu <yinghai@kernel.org> Date: Tue, 4 Aug 2009 08:59:59 -0700 Subject: x86: Fix MSI-X initialization by using online_mask for x2apic target_cpus found a system where x2apic reports an MSI-X irq initialization failure: [ 302.859446] igbvf 0000:81:10.4: enabling device (0000 -> 0002) [ 302.874369] igbvf 0000:81:10.4: using 64bit DMA mask [ 302.879023] igbvf 0000:81:10.4: using 64bit consistent DMA mask [ 302.894386] igbvf 0000:81:10.4: enabling bus mastering [ 302.898171] igbvf 0000:81:10.4: setting latency timer to 64 [ 302.914050] reserve_memtype added 0xefb08000-0xefb0c000, track uncached-minus, req uncached-minus, ret uncached-minus [ 302.933839] reserve_memtype added 0xefb28000-0xefb29000, track uncached-minus, req uncached-minus, ret uncached-minus [ 302.940367] alloc irq_desc for 265 on node 4 [ 302.956874] alloc kstat_irqs on node 4 [ 302.959452] alloc irq_2_iommu on node 0 [ 302.974328] igbvf 0000:81:10.4: irq 265 for MSI/MSI-X [ 302.977778] alloc irq_desc for 266 on node 4 [ 302.980347] alloc kstat_irqs on node 4 [ 302.995312] free_memtype request 0xefb28000-0xefb29000 [ 302.998816] igbvf 0000:81:10.4: Failed to initialize MSI-X interrupts. ... it turns out that when trying to enable MSI-X, __assign_irq_vector(new, cfg_new, apic->target_cpus()) can not get vector because for x2apic target-cpus returns cpumask_of(0) Update that to online_mask like xapic. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Suresh Siddha <suresh.b.siddha@intel.com> LKML-Reference: <4A785AFF.3050902@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/kernel/apic/x2apic_cluster.c | 8 +++++--- arch/x86/kernel/apic/x2apic_phys.c | 8 +++++--- 2 files changed, 10 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/x2apic_cluster.c b/arch/x86/kernel/apic/x2apic_cluster.c index 2ed4e2b..a5371ec 100644 --- a/arch/x86/kernel/apic/x2apic_cluster.c +++ b/arch/x86/kernel/apic/x2apic_cluster.c @@ -17,11 +17,13 @@ static int x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id) return x2apic_enabled(); } -/* Start with all IRQs pointing to boot CPU. IRQ balancing will shift them. */ - +/* + * need to use more than cpu 0, because we need more vectors when + * MSI-X are used. + */ static const struct cpumask *x2apic_target_cpus(void) { - return cpumask_of(0); + return cpu_online_mask; } /* diff --git a/arch/x86/kernel/apic/x2apic_phys.c b/arch/x86/kernel/apic/x2apic_phys.c index 0b631c6..a8989aa 100644 --- a/arch/x86/kernel/apic/x2apic_phys.c +++ b/arch/x86/kernel/apic/x2apic_phys.c @@ -27,11 +27,13 @@ static int x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id) return 0; } -/* Start with all IRQs pointing to boot CPU. IRQ balancing will shift them. */ - +/* + * need to use more than cpu 0, because we need more vectors when + * MSI-X are used. + */ static const struct cpumask *x2apic_target_cpus(void) { - return cpumask_of(0); + return cpu_online_mask; } static void x2apic_vector_allocation_domain(int cpu, struct cpumask *retmask) -- cgit v1.1 From 498cdbfbcf98e0d2c90a26e6a02a82f043876e48 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ozan=20=C3=87a=C4=9Flayan?= <ozan@pardus.org.tr> Date: Tue, 4 Aug 2009 19:39:31 +0300 Subject: x86: Add quirk to make Apple MacBookPro5,1 use reboot=pci MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit MacBookPro5,1 is not able to reboot unless reboot=pci is set. This patch forces it through a DMI quirk specific to this device. Signed-off-by: Ozan Çağlayan <ozan@pardus.org.tr> LKML-Reference: <1249403971-6543-1-git-send-email-ozan@pardus.org.tr> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/kernel/reboot.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index 834c9da..9eb8976 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -405,7 +405,7 @@ EXPORT_SYMBOL(machine_real_restart); #endif /* CONFIG_X86_32 */ /* - * Apple MacBook5,2 (2009 MacBook) needs reboot=p + * Some Apple MacBook and MacBookPro's needs reboot=p to be able to reboot */ static int __init set_pci_reboot(const struct dmi_system_id *d) { @@ -426,6 +426,14 @@ static struct dmi_system_id __initdata pci_reboot_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "MacBook5,2"), }, }, + { /* Handle problems with rebooting on Apple MacBookPro5,1 */ + .callback = set_pci_reboot, + .ident = "Apple MacBookPro5,1", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro5,1"), + }, + }, { } }; -- cgit v1.1 From fdb8a42742ac95606668f73481dfb2f760658fdd Mon Sep 17 00:00:00 2001 From: Roel Kluin <roel.kluin@gmail.com> Date: Thu, 6 Aug 2009 15:58:13 -0700 Subject: x86: fix buffer overflow in efi_init() If the vendor name (from c16) can be longer than 100 bytes (or missing a terminating null), then the null is written past the end of vendor[]. Found with Parfait, http://research.sun.com/projects/parfait/ Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: Huang Ying <ying.huang@intel.com> --- arch/x86/kernel/efi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/efi.c b/arch/x86/kernel/efi.c index 19ccf6d..fe26ba3 100644 --- a/arch/x86/kernel/efi.c +++ b/arch/x86/kernel/efi.c @@ -354,7 +354,7 @@ void __init efi_init(void) */ c16 = tmp = early_ioremap(efi.systab->fw_vendor, 2); if (c16) { - for (i = 0; i < sizeof(vendor) && *c16; ++i) + for (i = 0; i < sizeof(vendor) - 1 && *c16; ++i) vendor[i] = *c16++; vendor[i] = '\0'; } else -- cgit v1.1 From f36a1a133a947973efb8e6a1fbdcc23e4a011437 Mon Sep 17 00:00:00 2001 From: Paul Mackerras <paulus@samba.org> Date: Fri, 7 Aug 2009 16:59:45 +1000 Subject: perf_counter/powerpc: Fix oops on cpus without perf_counter hardware support If we have the powerpc perf_counter backend compiled in, but the cpu we are running on is one where we don't support the PMU, we currently oops in hw_perf_group_sched_in if we try to use any counters, because ppmu is NULL in that case, and we unconditionally dereference ppmu. This fixes the problem by adding a check if ppmu is NULL at the beginning of hw_perf_group_sched_in, and also at the beginning of the other functions that get called from the perf_counter core, i.e. hw_perf_disable, hw_perf_enable, and hw_perf_counter_setup. Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: benh@kernel.crashing.org Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/powerpc/kernel/perf_counter.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/kernel/perf_counter.c b/arch/powerpc/kernel/perf_counter.c index 809fdf9..70e1f57 100644 --- a/arch/powerpc/kernel/perf_counter.c +++ b/arch/powerpc/kernel/perf_counter.c @@ -518,6 +518,8 @@ void hw_perf_disable(void) struct cpu_hw_counters *cpuhw; unsigned long flags; + if (!ppmu) + return; local_irq_save(flags); cpuhw = &__get_cpu_var(cpu_hw_counters); @@ -572,6 +574,8 @@ void hw_perf_enable(void) int n_lim; int idx; + if (!ppmu) + return; local_irq_save(flags); cpuhw = &__get_cpu_var(cpu_hw_counters); if (!cpuhw->disabled) { @@ -737,6 +741,8 @@ int hw_perf_group_sched_in(struct perf_counter *group_leader, long i, n, n0; struct perf_counter *sub; + if (!ppmu) + return 0; cpuhw = &__get_cpu_var(cpu_hw_counters); n0 = cpuhw->n_counters; n = collect_events(group_leader, ppmu->n_counter - n0, @@ -1281,6 +1287,8 @@ void hw_perf_counter_setup(int cpu) { struct cpu_hw_counters *cpuhw = &per_cpu(cpu_hw_counters, cpu); + if (!ppmu) + return; memset(cpuhw, 0, sizeof(*cpuhw)); cpuhw->mmcr[0] = MMCR0_FC; } -- cgit v1.1 From b2f2e8fee3d62f621e795f25b2fc0f51bbdb4af9 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt <benh@kernel.crashing.org> Date: Mon, 10 Aug 2009 16:36:38 +1000 Subject: powerpc/dma: pci_set_dma_mask() shouldn't fail if mask fits in RAM On an iMac G5, the b43 driver is failing to initialise because trying to set the dma mask to 30-bit fails. Even though there's only 512MiB of RAM in the machine anyway: https://bugzilla.redhat.com/show_bug.cgi?id=514787 We should probably let it succeed if the available RAM in the system doesn't exceed the requested limit. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> --- arch/powerpc/kernel/dma.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c index 20a60d6..ccf129d 100644 --- a/arch/powerpc/kernel/dma.c +++ b/arch/powerpc/kernel/dma.c @@ -7,6 +7,7 @@ #include <linux/device.h> #include <linux/dma-mapping.h> +#include <linux/lmb.h> #include <asm/bug.h> #include <asm/abs_addr.h> @@ -90,11 +91,10 @@ static void dma_direct_unmap_sg(struct device *dev, struct scatterlist *sg, static int dma_direct_dma_supported(struct device *dev, u64 mask) { #ifdef CONFIG_PPC64 - /* Could be improved to check for memory though it better be - * done via some global so platforms can set the limit in case + /* Could be improved so platforms can set the limit in case * they have limited DMA windows */ - return mask >= DMA_BIT_MASK(32); + return mask >= (lmb_end_of_DRAM() - 1); #else return 1; #endif -- cgit v1.1 From cd92204924fafbd5c7241dfd12ca3176d542e0c5 Mon Sep 17 00:00:00 2001 From: Tony Lindgren <tony@atomide.com> Date: Mon, 10 Aug 2009 14:49:50 +0300 Subject: OMAP: Fix testing of cpu defines for mach-omap1 There's no need to keep these defines limited in the ifdef block for mach-omap2. It will just cause problems testing for the CPU revision in the common code, like the next patch does for the DMA errata. Signed-off-by: Tony Lindgren <tony@atomide.com> --- arch/arm/plat-omap/include/mach/cpu.h | 5 ----- 1 file changed, 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h index 285eaa3..11e73d9 100644 --- a/arch/arm/plat-omap/include/mach/cpu.h +++ b/arch/arm/plat-omap/include/mach/cpu.h @@ -378,9 +378,6 @@ IS_OMAP_TYPE(3430, 0x3430) #define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx() || \ cpu_is_omap44xx()) -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \ - defined(CONFIG_ARCH_OMAP4) - /* Various silicon revisions for omap2 */ #define OMAP242X_CLASS 0x24200024 #define OMAP2420_REV_ES1_0 0x24200024 @@ -436,5 +433,3 @@ IS_OMAP_TYPE(3430, 0x3430) int omap_chip_is(struct omap_chip_id oci); void omap2_check_revision(void); - -#endif /* defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) */ -- cgit v1.1 From 284119c48f4a0c469b3e0237b500e536b4bc7b6f Mon Sep 17 00:00:00 2001 From: Vikram Pandita <vikram.pandita@ti.com> Date: Mon, 10 Aug 2009 14:49:50 +0300 Subject: OMAP2/3: DMA errata correction This errata is valid for: OMAP2420 Errata 1.85 Impacts all 2420 ES rev OMAP2430 Errata 1.10 Impacts only ES1.0 Description: DMA may hang when several channels are used in parallel OMAP3430: Not impacted, so remove the errata fix for omap3 Fixed issue reported on cpu_is_omap24xx check reported by Nishant Kamat Signed-off-by: Vikram Pandita <vikram.pandita@ti.com> Reviewed-by: Nishant Kamat <nskamat@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> --- arch/arm/plat-omap/dma.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 7677a4a..e3ac94f 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -946,7 +946,9 @@ void omap_start_dma(int lch) cur_lch = next_lch; } while (next_lch != -1); - } else if (cpu_class_is_omap2()) { + } else if (cpu_is_omap242x() || + (cpu_is_omap243x() && omap_type() <= OMAP2430_REV_ES1_0)) { + /* Errata: Need to write lch even if not using chaining */ dma_write(lch, CLNK_CTRL(lch)); } -- cgit v1.1 From 370bc1fdefb8a30018d98aca2fdfd6b6701082e7 Mon Sep 17 00:00:00 2001 From: Janboe Ye <yuan-bo.ye@motorola.com> Date: Mon, 10 Aug 2009 14:49:50 +0300 Subject: OMAP3: Fix omap3 sram virtual addres overlap vmalloc space after increasing vmalloc size commit e85c205ac1427f2405021a36f083280ff0d0a35e increase vmalloc size. vmalloc space will overlap with OMAP3 sram virtual address. Signed-off-by: Li Hong Mei <hong-mei.li@motorola.com> Signed-off-by: Janboe Ye <yuan-bo.ye@motorola.com> Reviewed-by: Paul Walmsley <paul@pwsan.com> --- arch/arm/plat-omap/sram.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 4ea7380..2890b11 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -44,9 +44,9 @@ #define OMAP2_SRAM_VA 0xe3000000 #define OMAP2_SRAM_PUB_VA (OMAP2_SRAM_VA + 0x800) #define OMAP3_SRAM_PA 0x40200000 -#define OMAP3_SRAM_VA 0xd7000000 +#define OMAP3_SRAM_VA 0xe3000000 #define OMAP3_SRAM_PUB_PA 0x40208000 -#define OMAP3_SRAM_PUB_VA 0xd7008000 +#define OMAP3_SRAM_PUB_VA (OMAP3_SRAM_VA + 0x8000) #define OMAP4_SRAM_PA 0x40200000 /*0x402f0000*/ #define OMAP4_SRAM_VA 0xd7000000 /*0xd70f0000*/ -- cgit v1.1 From 5032902c331acc71956e47abd90d090181c5ef4a Mon Sep 17 00:00:00 2001 From: Sergio Aguirre <saaguirre@ti.com> Date: Mon, 10 Aug 2009 14:49:50 +0300 Subject: OMAP3: Overo: Fix smsc911x platform device resource value Fixes a wrong setting of resource parameter list in SMSC911x platform driver data structure for Overo case. This fixes folowing warning when compiling for Overo board: warning: initialization from incompatible pointer type Introduced since commit id: commit 172ef275444efa12d834fb9d1b1acdac92db47f7 Author: Steve Sakoman <sakoman@gmail.com> Date: Mon Feb 2 06:27:49 2009 +0000 ARM: Add SMSC911X support to Overo platform (V2) Signed-off-by: Sergio Aguirre <saaguirre@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> --- arch/arm/mach-omap2/board-overo.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index dff5528..fec1bb1 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -146,7 +146,7 @@ static struct platform_device overo_smsc911x_device = { .name = "smsc911x", .id = -1, .num_resources = ARRAY_SIZE(overo_smsc911x_resources), - .resource = &overo_smsc911x_resources, + .resource = overo_smsc911x_resources, .dev = { .platform_data = &overo_smsc911x_config, }, -- cgit v1.1 From dfc27b34496923b5f552eb9cdf20468045114ada Mon Sep 17 00:00:00 2001 From: Roger Quadros <ext-roger.quadros@nokia.com> Date: Mon, 10 Aug 2009 14:49:51 +0300 Subject: OMAP3: RX51: Define TWL4030 USB transceiver in board file Add OTG transceiver to RX51 platform data to prevent kernel NULL pointer dereference during MUSB initialisation. Signed-off-by: Roger Quadros <ext-roger.quadros@nokia.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com> --- arch/arm/mach-omap2/board-rx51-peripherals.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 9a0bf67..56d931a 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -278,6 +278,10 @@ static struct twl4030_gpio_platform_data rx51_gpio_data = { .setup = rx51_twlgpio_setup, }; +static struct twl4030_usb_data rx51_usb_data = { + .usb_mode = T2_USB_MODE_ULPI, +}; + static struct twl4030_platform_data rx51_twldata = { .irq_base = TWL4030_IRQ_BASE, .irq_end = TWL4030_IRQ_END, @@ -286,6 +290,7 @@ static struct twl4030_platform_data rx51_twldata = { .gpio = &rx51_gpio_data, .keypad = &rx51_kp_data, .madc = &rx51_madc_data, + .usb = &rx51_usb_data, .vaux1 = &rx51_vaux1, .vaux2 = &rx51_vaux2, -- cgit v1.1 From 22833044fbe2764d44ae03f58508e671652ca186 Mon Sep 17 00:00:00 2001 From: Roger Quadros <ext-roger.quadros@nokia.com> Date: Mon, 10 Aug 2009 14:49:51 +0300 Subject: OMAP2/3: mmc-twl4030: Free up MMC regulators while cleaning up twl_mmc_cleanup() must free up the regulators that were allocated by twl_mmc_late_init(). This eliminates the below error when 'omap_hsmmc' module is repeatedly loaded and unloaded. "sysfs: cannot create duplicate filename '/devices/platform /mmci-omap-hs.0/microamps_requested_vmmc'" Signed-off-by: Roger Quadros <ext-roger.quadros@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com> --- arch/arm/mach-omap2/mmc-twl4030.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c index 1541fd4..3c04c2f 100644 --- a/arch/arm/mach-omap2/mmc-twl4030.c +++ b/arch/arm/mach-omap2/mmc-twl4030.c @@ -119,6 +119,7 @@ static int twl_mmc_late_init(struct device *dev) if (i != 0) break; ret = PTR_ERR(reg); + hsmmc[i].vcc = NULL; goto err; } hsmmc[i].vcc = reg; @@ -165,8 +166,13 @@ done: static void twl_mmc_cleanup(struct device *dev) { struct omap_mmc_platform_data *mmc = dev->platform_data; + int i; gpio_free(mmc->slots[0].switch_pin); + for(i = 0; i < ARRAY_SIZE(hsmmc); i++) { + regulator_put(hsmmc[i].vcc); + regulator_put(hsmmc[i].vcc_aux); + } } #ifdef CONFIG_PM -- cgit v1.1 From 4177662ec9f5e50b69ef074369fdb429dd48d97e Mon Sep 17 00:00:00 2001 From: Roger Quadros <ext-roger.quadros@nokia.com> Date: Mon, 10 Aug 2009 14:49:52 +0300 Subject: OMAP3: RX51: Updated rx51_defconfig Added REGULATOR, MMC and updated default CMDLINE so RX51 now boots. Note that the regulator code should be moved from mmc-twl4030.c to omap_hsmmc.c so it can be a module. Signed-off-by: Roger Quadros <ext-roger.quadros@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com> --- arch/arm/configs/rx51_defconfig | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/configs/rx51_defconfig b/arch/arm/configs/rx51_defconfig index eb2cb31..f238df6 100644 --- a/arch/arm/configs/rx51_defconfig +++ b/arch/arm/configs/rx51_defconfig @@ -282,7 +282,7 @@ CONFIG_ALIGNMENT_TRAP=y # CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs rootflags=bulk_read,no_chk_data_crc rw console=ttyMTD,log console=tty0" +CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs rootflags=bulk_read,no_chk_data_crc rw console=ttyMTD,log console=tty0 console=ttyS2,115200n8" # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set @@ -1354,7 +1354,7 @@ CONFIG_USB_OTG_UTILS=y # CONFIG_USB_GPIO_VBUS is not set # CONFIG_ISP1301_OMAP is not set CONFIG_TWL4030_USB=y -CONFIG_MMC=m +CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set # CONFIG_MMC_UNSAFE_RESUME is not set @@ -1449,7 +1449,8 @@ CONFIG_RTC_DRV_TWL4030=m # on-CPU RTC drivers # # CONFIG_DMADEVICES is not set -# CONFIG_REGULATOR is not set +CONFIG_REGULATOR=y +CONFIG_REGULATOR_TWL4030=y # CONFIG_UIO is not set # CONFIG_STAGING is not set -- cgit v1.1 From 04e35357e2e3ff4e0cabd6468354cf3dbfeb4f27 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput <jaswinder@kernel.org> Date: Mon, 10 Aug 2009 16:45:42 +0100 Subject: MN10300: includecheck fix: mn10300, pci.h Fix the following 'make includecheck' warning: arch/mn10300/include/asm/pci.h: linux/mm.h is included more than once. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> --- arch/mn10300/include/asm/pci.h | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/mn10300/include/asm/pci.h b/arch/mn10300/include/asm/pci.h index 35d2ed6..19aecc9 100644 --- a/arch/mn10300/include/asm/pci.h +++ b/arch/mn10300/include/asm/pci.h @@ -59,7 +59,6 @@ void pcibios_penalize_isa_irq(int irq); #include <linux/slab.h> #include <asm/scatterlist.h> #include <linux/string.h> -#include <linux/mm.h> #include <asm/io.h> struct pci_dev; -- cgit v1.1 From b6e61eef4f9f94714ac3ee4a5c96862d9bcd1836 Mon Sep 17 00:00:00 2001 From: Linus Torvalds <torvalds@linux-foundation.org> Date: Fri, 31 Jul 2009 12:45:41 -0700 Subject: x86: Fix serialization in pit_expect_msb() Wei Chong Tan reported a fast-PIT-calibration corner-case: | pit_expect_msb() is vulnerable to SMI disturbance corner case | in some platforms which causes /proc/cpuinfo to show wrong | CPU MHz value when quick_pit_calibrate() jumps to success | section. I think that the real issue isn't even an SMI - but the fact that in the very last iteration of the loop, there's no serializing instruction _after_ the last 'rdtsc'. So even in the absense of SMI's, we do have a situation where the cycle counter was read without proper serialization. The last check should be done outside the outer loop, since _inside_ the outer loop, we'll be testing that the PIT has the right MSB value has the right value in the next iteration. So only the _last_ iteration is special, because that's the one that will not check the PIT MSB value any more, and because the final 'get_cycles()' isn't serialized. In other words: - I'd like to move the PIT MSB check to after the last iteration, rather than in every iteration - I think we should comment on the fact that it's also a serializing instruction and so 'fences in' the TSC read. Here's a suggested replacement. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: "Tan, Wei Chong" <wei.chong.tan@intel.com> Tested-by: "Tan, Wei Chong" <wei.chong.tan@intel.com> LKML-Reference: <B28277FD4E0F9247A3D55704C440A140D5D683F3@pgsmsx504.gar.corp.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/kernel/tsc.c | 29 ++++++++++++++++++++++------- 1 file changed, 22 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c index 6e1a368..71f4368 100644 --- a/arch/x86/kernel/tsc.c +++ b/arch/x86/kernel/tsc.c @@ -275,15 +275,20 @@ static unsigned long pit_calibrate_tsc(u32 latch, unsigned long ms, int loopmin) * use the TSC value at the transitions to calculate a pretty * good value for the TSC frequencty. */ +static inline int pit_verify_msb(unsigned char val) +{ + /* Ignore LSB */ + inb(0x42); + return inb(0x42) == val; +} + static inline int pit_expect_msb(unsigned char val, u64 *tscp, unsigned long *deltap) { int count; u64 tsc = 0; for (count = 0; count < 50000; count++) { - /* Ignore LSB */ - inb(0x42); - if (inb(0x42) != val) + if (!pit_verify_msb(val)) break; tsc = get_cycles(); } @@ -336,8 +341,7 @@ static unsigned long quick_pit_calibrate(void) * to do that is to just read back the 16-bit counter * once from the PIT. */ - inb(0x42); - inb(0x42); + pit_verify_msb(0); if (pit_expect_msb(0xff, &tsc, &d1)) { for (i = 1; i <= MAX_QUICK_PIT_ITERATIONS; i++) { @@ -348,8 +352,19 @@ static unsigned long quick_pit_calibrate(void) * Iterate until the error is less than 500 ppm */ delta -= tsc; - if (d1+d2 < delta >> 11) - goto success; + if (d1+d2 >= delta >> 11) + continue; + + /* + * Check the PIT one more time to verify that + * all TSC reads were stable wrt the PIT. + * + * This also guarantees serialization of the + * last cycle read ('d2') in pit_expect_msb. + */ + if (!pit_verify_msb(0xfe - i)) + break; + goto success; } } printk("Fast TSC calibration failed\n"); -- cgit v1.1 From 3e03bbeac541856aaaf1ce1ab0250b6a490e4099 Mon Sep 17 00:00:00 2001 From: Shunichi Fuji <palglowr@gmail.com> Date: Tue, 11 Aug 2009 03:34:40 +0900 Subject: x86: Add reboot quirk for every 5 series MacBook/Pro MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Reboot does not work on my MacBook Pro 13 inch (MacBookPro5,5) too. It seems all unibody MacBook and MacBookPro require PCI reboot handling, i guess. Following model/machine ID list shows unibody MacBook/Pro have the 5 series of model number: http://www.everymac.com/systems/by_capability/macs-by-machine-model-machine-id.html Signed-off-by: Shunichi Fuji <palglowr@gmail.com> Cc: Ozan Çağlayan <ozan@pardus.org.tr> LKML-Reference: <30046e3b0908101134p6487ddbftd8776e4ddef204be@mail.gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/kernel/reboot.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index 9eb8976..a06e8d1 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -418,20 +418,20 @@ static int __init set_pci_reboot(const struct dmi_system_id *d) } static struct dmi_system_id __initdata pci_reboot_dmi_table[] = { - { /* Handle problems with rebooting on Apple MacBook5,2 */ + { /* Handle problems with rebooting on Apple MacBook5 */ .callback = set_pci_reboot, - .ident = "Apple MacBook", + .ident = "Apple MacBook5", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "MacBook5,2"), + DMI_MATCH(DMI_PRODUCT_NAME, "MacBook5"), }, }, - { /* Handle problems with rebooting on Apple MacBookPro5,1 */ + { /* Handle problems with rebooting on Apple MacBookPro5 */ .callback = set_pci_reboot, - .ident = "Apple MacBookPro5,1", + .ident = "Apple MacBookPro5", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro5,1"), + DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro5"), }, }, { } -- cgit v1.1 From 0d01f31439c1e4d602bf9fdc924ab66f407f5e38 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov <dmitry.torokhov@gmail.com> Date: Sun, 9 Aug 2009 21:44:49 -0700 Subject: x86, mce: therm_throt - change when we print messages My Latitude d630 seems to be handling thermal events in SMI by lowering the max frequency of the CPU till it cools down but still leaks the "everything is normal" events. This spams the console and with high priority printks. Adjust therm_throt driver to only print messages about the fact that temperatire returned back to normal when leaving the throttling state. Also lower the severity of "back to normal" message from KERN_CRIT to KERN_INFO. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Acked-by: H. Peter Anvin <hpa@zytor.com> LKML-Reference: <20090810051513.0558F526EC9@mailhub.coreip.homeip.net> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/kernel/cpu/mcheck/therm_throt.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c index bff8dd1..8bc64cf 100644 --- a/arch/x86/kernel/cpu/mcheck/therm_throt.c +++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c @@ -36,6 +36,7 @@ static DEFINE_PER_CPU(__u64, next_check) = INITIAL_JIFFIES; static DEFINE_PER_CPU(unsigned long, thermal_throttle_count); +static DEFINE_PER_CPU(bool, thermal_throttle_active); static atomic_t therm_throt_en = ATOMIC_INIT(0); @@ -96,24 +97,27 @@ static int therm_throt_process(int curr) { unsigned int cpu = smp_processor_id(); __u64 tmp_jiffs = get_jiffies_64(); + bool was_throttled = __get_cpu_var(thermal_throttle_active); + bool is_throttled = __get_cpu_var(thermal_throttle_active) = curr; - if (curr) + if (is_throttled) __get_cpu_var(thermal_throttle_count)++; - if (time_before64(tmp_jiffs, __get_cpu_var(next_check))) + if (!(was_throttled ^ is_throttled) && + time_before64(tmp_jiffs, __get_cpu_var(next_check))) return 0; __get_cpu_var(next_check) = tmp_jiffs + CHECK_INTERVAL; /* if we just entered the thermal event */ - if (curr) { + if (is_throttled) { printk(KERN_CRIT "CPU%d: Temperature above threshold, " - "cpu clock throttled (total events = %lu)\n", cpu, - __get_cpu_var(thermal_throttle_count)); + "cpu clock throttled (total events = %lu)\n", + cpu, __get_cpu_var(thermal_throttle_count)); add_taint(TAINT_MACHINE_CHECK); - } else { - printk(KERN_CRIT "CPU%d: Temperature/speed normal\n", cpu); + } else if (was_throttled) { + printk(KERN_INFO "CPU%d: Temperature/speed normal\n", cpu); } return 1; -- cgit v1.1 From 3c581a7f94542341bf0da496a226b44ac63521a8 Mon Sep 17 00:00:00 2001 From: Ingo Molnar <mingo@elte.hu> Date: Tue, 11 Aug 2009 10:47:36 +0200 Subject: perf_counter, x86: Fix lapic printk message Instead of this garbled bootup on UP Pentium-M systems: [ 0.015048] Performance Counters: [ 0.016004] no Local APIC, try rebooting with lapicno PMU driver, software counters only. Print: [ 0.015050] Performance Counters: [ 0.016004] no APIC, boot with the "lapic" boot parameter to force-enable it. [ 0.017003] no PMU driver, software counters only. Cf: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/kernel/cpu/perf_counter.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c index a7aa8f9..40e233a 100644 --- a/arch/x86/kernel/cpu/perf_counter.c +++ b/arch/x86/kernel/cpu/perf_counter.c @@ -1590,7 +1590,7 @@ static int p6_pmu_init(void) } if (!cpu_has_apic) { - pr_info("no Local APIC, try rebooting with lapic"); + pr_info("no APIC, boot with the \"lapic\" boot parameter to force-enable it.\n"); return -ENODEV; } -- cgit v1.1 From f64ccccb8afa43abdd63fcbd230f818d6ea0883f Mon Sep 17 00:00:00 2001 From: Ingo Molnar <mingo@elte.hu> Date: Tue, 11 Aug 2009 10:26:33 +0200 Subject: perf_counter, x86: Fix generic cache events on P6-mobile CPUs Johannes Stezenbach reported that 'perf stat' does not count cache-miss and cache-references events on his Pentium-M based laptop. This is because we left them blank in p6_perfmon_event_map[], fill them in. Reported-by: Johannes Stezenbach <js@sig21.net> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/kernel/cpu/perf_counter.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c index 40e233a..fffc126 100644 --- a/arch/x86/kernel/cpu/perf_counter.c +++ b/arch/x86/kernel/cpu/perf_counter.c @@ -72,8 +72,8 @@ static const u64 p6_perfmon_event_map[] = { [PERF_COUNT_HW_CPU_CYCLES] = 0x0079, [PERF_COUNT_HW_INSTRUCTIONS] = 0x00c0, - [PERF_COUNT_HW_CACHE_REFERENCES] = 0x0000, - [PERF_COUNT_HW_CACHE_MISSES] = 0x0000, + [PERF_COUNT_HW_CACHE_REFERENCES] = 0x0f2e, + [PERF_COUNT_HW_CACHE_MISSES] = 0x012e, [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x00c4, [PERF_COUNT_HW_BRANCH_MISSES] = 0x00c5, [PERF_COUNT_HW_BUS_CYCLES] = 0x0062, -- cgit v1.1 From fbd8b1819e80ac5a176d085fdddc3a34d1499318 Mon Sep 17 00:00:00 2001 From: Kevin Winchester <kjwinchester@gmail.com> Date: Mon, 10 Aug 2009 19:56:45 -0300 Subject: x86: Clear incorrectly forced X86_FEATURE_LAHF_LM flag Due to an erratum with certain AMD Athlon 64 processors, the BIOS may need to force enable the LAHF_LM capability. Unfortunately, in at least one case, the BIOS does this even for processors that do not support the functionality. Add a specific check that will clear the feature bit for processors known not to support the LAHF/SAHF instructions. Signed-off-by: Kevin Winchester <kjwinchester@gmail.com> Acked-by: Borislav Petkov <petkovbb@googlemail.com> LKML-Reference: <4A80A5AD.2000209@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/kernel/cpu/amd.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index e2485b0..63fddcd0 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -400,6 +400,13 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c) level = cpuid_eax(1); if((level >= 0x0f48 && level < 0x0f50) || level >= 0x0f58) set_cpu_cap(c, X86_FEATURE_REP_GOOD); + + /* + * Some BIOSes incorrectly force this feature, but only K8 + * revision D (model = 0x14) and later actually support it. + */ + if (c->x86_model < 0x14) + clear_cpu_cap(c, X86_FEATURE_LAHF_LM); } if (c->x86 == 0x10 || c->x86 == 0x11) set_cpu_cap(c, X86_FEATURE_REP_GOOD); -- cgit v1.1 From dee2b904a1f93c275a015b67cd693038d74b18e8 Mon Sep 17 00:00:00 2001 From: Mikael Pettersson <mikpe@it.uu.se> Date: Sun, 9 Aug 2009 21:21:57 +0200 Subject: IXP4xx: Fix IO_SPACE_LIMIT for 2.6.31-rc core PCI changes MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit 2.6.31-rc kernels don't boot on my ixp4xx box (ds101), because the libata driver doesn't find the PCI IDE controller any more. 2.6.30 was fine. I traced this to a PCI update (1f82de10d6b1d845155363c895c552e61b36b51a) in 2.6.30-git19. Diffing the kernel boot logs from 2.6.30-git18 and 2.6.30-git19 illustrates the breakage: > --- dmesg-2.6.30-git18 2009-08-04 01:45:22.000000000 +0200 > +++ dmesg-2.6.30-git19 2009-08-04 01:45:46.000000000 +0200 > @@ -26,6 +26,13 @@ > pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot > pci 0000:00:02.2: PME# disabled > PCI: bus0: Fast back to back transfers disabled > +pci 0000:00:01.0: BAR 0: can't allocate I/O resource [0x10000-0xffff] > +pci 0000:00:01.0: BAR 1: can't allocate I/O resource [0x10000-0xffff] > +pci 0000:00:01.0: BAR 2: can't allocate I/O resource [0x10000-0xffff] > +pci 0000:00:01.0: BAR 3: can't allocate I/O resource [0x10000-0xffff] > +pci 0000:00:01.0: BAR 4: can't allocate I/O resource [0x10000-0xffff] > +pci 0000:00:02.0: BAR 4: can't allocate I/O resource [0x10000-0xffff] > +pci 0000:00:02.1: BAR 4: can't allocate I/O resource [0x10000-0xffff] > bio: create slab <bio-0> at 0 > SCSI subsystem initialized > NET: Registered protocol family 2 > @@ -44,11 +51,7 @@ > console [ttyS0] enabled > serial8250.0: ttyS1 at MMIO 0xc8001000 (irq = 13) is a XScale > Driver 'sd' needs updating - please use bus_type methods > -PCI: enabling device 0000:00:01.0 (0140 -> 0141) > -scsi0 : pata_artop > -scsi1 : pata_artop > -ata1: PATA max UDMA/100 cmd 0x1050 ctl 0x1060 bmdma 0x1040 irq 28 > -ata2: PATA max UDMA/100 cmd 0x1058 ctl 0x1064 bmdma 0x1048 irq 28 > +pata_artop 0000:00:01.0: no available native port > Using configured DiskOnChip probe address 0x50000000 > DiskOnChip found at 0x50000000 > NAND device: Manufacturer ID: 0x98, Chip ID: 0x73 (Toshiba NAND 16MiB 3,3V 8-bit) The specific change in 1f82de10d6b1d845155363c895c552e61b36b51a responsible for this failure turned out to be the following: > --- a/drivers/pci/probe.c > +++ b/drivers/pci/probe.c > @@ -193,7 +193,7 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type, > res->flags |= pci_calc_resource_flags(l) | IORESOURCE_SIZEALIGN; > if (type == pci_bar_io) { > l &= PCI_BASE_ADDRESS_IO_MASK; > - mask = PCI_BASE_ADDRESS_IO_MASK & 0xffff; > + mask = PCI_BASE_ADDRESS_IO_MASK & IO_SPACE_LIMIT; > } else { > l &= PCI_BASE_ADDRESS_MEM_MASK; > mask = (u32)PCI_BASE_ADDRESS_MEM_MASK; Every arch except arm's ixp4xx defines IO_SPACE_LIMIT as an all-bits-one bitmask, typically -1UL but sometimes only a 16-bit 0x0000ffff. But ixp4xx defines it as 0xffff0000, which is now causing the PCI failures. Russell King noted that ixp4xx has 64KB PCI IO space, so IO_SPACE_LIMIT should be 0x0000ffff. This patch makes that change, which fixes the PCI failures on my ixp4xx box. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl> --- arch/arm/mach-ixp4xx/include/mach/io.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-ixp4xx/include/mach/io.h b/arch/arm/mach-ixp4xx/include/mach/io.h index ce63048..8a947d4 100644 --- a/arch/arm/mach-ixp4xx/include/mach/io.h +++ b/arch/arm/mach-ixp4xx/include/mach/io.h @@ -17,7 +17,7 @@ #include <mach/hardware.h> -#define IO_SPACE_LIMIT 0xffff0000 +#define IO_SPACE_LIMIT 0x0000ffff extern int (*ixp4xx_pci_read)(u32 addr, u32 cmd, u32* data); extern int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data); -- cgit v1.1 From eeac19a7efa150231e4a6bb110d6f27500bcc8ce Mon Sep 17 00:00:00 2001 From: Jason Baron <jbaron@redhat.com> Date: Mon, 10 Aug 2009 16:52:13 -0400 Subject: tracing: Map syscall name to number Add a new function to support translating a syscall name to number at runtime. This allows the syscall event tracer to map syscall names to number. Signed-off-by: Jason Baron <jbaron@redhat.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Martin Bligh <mbligh@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> --- arch/x86/kernel/ftrace.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c index 8e96634..afb31d7 100644 --- a/arch/x86/kernel/ftrace.c +++ b/arch/x86/kernel/ftrace.c @@ -500,6 +500,22 @@ struct syscall_metadata *syscall_nr_to_meta(int nr) return syscalls_metadata[nr]; } +int syscall_name_to_nr(char *name) +{ + int i; + + if (!syscalls_metadata) + return -1; + + for (i = 0; i < FTRACE_SYSCALL_MAX; i++) { + if (syscalls_metadata[i]) { + if (!strcmp(syscalls_metadata[i]->name, name)) + return i; + } + } + return -1; +} + void arch_init_ftrace_syscalls(void) { int i; -- cgit v1.1 From 066e0378c23f0a3db730893f6a041e4a3922a385 Mon Sep 17 00:00:00 2001 From: Jason Baron <jbaron@redhat.com> Date: Mon, 10 Aug 2009 16:52:23 -0400 Subject: tracing: Call arch_init_ftrace_syscalls at boot Call arch_init_ftrace_syscalls at boot, so we can determine early the set of syscalls for the syscall trace events. Signed-off-by: Jason Baron <jbaron@redhat.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Martin Bligh <mbligh@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> --- arch/x86/kernel/ftrace.c | 15 ++++----------- 1 file changed, 4 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c index afb31d7..0d93d40 100644 --- a/arch/x86/kernel/ftrace.c +++ b/arch/x86/kernel/ftrace.c @@ -516,31 +516,24 @@ int syscall_name_to_nr(char *name) return -1; } -void arch_init_ftrace_syscalls(void) +static int __init arch_init_ftrace_syscalls(void) { int i; struct syscall_metadata *meta; unsigned long **psys_syscall_table = &sys_call_table; - static atomic_t refs; - - if (atomic_inc_return(&refs) != 1) - goto end; syscalls_metadata = kzalloc(sizeof(*syscalls_metadata) * FTRACE_SYSCALL_MAX, GFP_KERNEL); if (!syscalls_metadata) { WARN_ON(1); - return; + return -ENOMEM; } for (i = 0; i < FTRACE_SYSCALL_MAX; i++) { meta = find_syscall_meta(psys_syscall_table[i]); syscalls_metadata[i] = meta; } - return; - - /* Paranoid: avoid overflow */ -end: - atomic_dec(&refs); + return 0; } +arch_initcall(arch_init_ftrace_syscalls); #endif -- cgit v1.1 From a871bd33a6c0bc86fb47cd02ea2650dd43d3d95f Mon Sep 17 00:00:00 2001 From: Jason Baron <jbaron@redhat.com> Date: Mon, 10 Aug 2009 16:52:31 -0400 Subject: tracing: Add syscall tracepoints add two tracepoints in syscall exit and entry path, conditioned on TIF_SYSCALL_FTRACE. Supports the syscall trace event code. Signed-off-by: Jason Baron <jbaron@redhat.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Martin Bligh <mbligh@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> --- arch/x86/kernel/ptrace.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c index 09ecbde..34dd6f1 100644 --- a/arch/x86/kernel/ptrace.c +++ b/arch/x86/kernel/ptrace.c @@ -37,6 +37,9 @@ #include <trace/syscall.h> +DEFINE_TRACE(syscall_enter); +DEFINE_TRACE(syscall_exit); + #include "tls.h" enum x86_regset { @@ -1498,7 +1501,7 @@ asmregparm long syscall_trace_enter(struct pt_regs *regs) ret = -1L; if (unlikely(test_thread_flag(TIF_SYSCALL_FTRACE))) - ftrace_syscall_enter(regs); + trace_syscall_enter(regs, regs->orig_ax); if (unlikely(current->audit_context)) { if (IS_IA32) @@ -1524,7 +1527,7 @@ asmregparm void syscall_trace_leave(struct pt_regs *regs) audit_syscall_exit(AUDITSC_RESULT(regs->ax), regs->ax); if (unlikely(test_thread_flag(TIF_SYSCALL_FTRACE))) - ftrace_syscall_exit(regs); + trace_syscall_exit(regs, regs->ax); if (test_thread_flag(TIF_SYSCALL_TRACE)) tracehook_report_syscall_exit(regs, 0); -- cgit v1.1 From 9daa77e2e9a6b8b859660d5e24d0f8cd77c2af39 Mon Sep 17 00:00:00 2001 From: Jason Baron <jbaron@redhat.com> Date: Mon, 10 Aug 2009 16:52:35 -0400 Subject: tracing: Update FTRACE_SYSCALL_MAX update FTRACE_SYSCALL_MAX to the current number of syscalls FTRACE_SYSCALL_MAX is a temporary solution to get the number of syscalls supported by the arch until we find a more dynamic way to get this number. Signed-off-by: Jason Baron <jbaron@redhat.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Martin Bligh <mbligh@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> --- arch/x86/include/asm/ftrace.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/ftrace.h b/arch/x86/include/asm/ftrace.h index bd2c651..7113654 100644 --- a/arch/x86/include/asm/ftrace.h +++ b/arch/x86/include/asm/ftrace.h @@ -30,9 +30,9 @@ /* FIXME: I don't want to stay hardcoded */ #ifdef CONFIG_X86_64 -# define FTRACE_SYSCALL_MAX 296 +# define FTRACE_SYSCALL_MAX 299 #else -# define FTRACE_SYSCALL_MAX 333 +# define FTRACE_SYSCALL_MAX 337 #endif #ifdef CONFIG_FUNCTION_TRACER -- cgit v1.1 From 64c12e0444fcc6b75eb49144ba46d43dbdc6bc8f Mon Sep 17 00:00:00 2001 From: Jason Baron <jbaron@redhat.com> Date: Mon, 10 Aug 2009 16:52:53 -0400 Subject: tracing: Add individual syscalls tracepoint id support The current state of syscalls tracepoints generates only one event id for every syscall events. This patch associates an id with each syscall trace event, so that we can identify each syscall trace event using the 'perf' tool. Signed-off-by: Jason Baron <jbaron@redhat.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Martin Bligh <mbligh@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> --- arch/x86/kernel/ftrace.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c index 0d93d40..3cff121 100644 --- a/arch/x86/kernel/ftrace.c +++ b/arch/x86/kernel/ftrace.c @@ -516,6 +516,16 @@ int syscall_name_to_nr(char *name) return -1; } +void set_syscall_enter_id(int num, int id) +{ + syscalls_metadata[num]->enter_id = id; +} + +void set_syscall_exit_id(int num, int id) +{ + syscalls_metadata[num]->exit_id = id; +} + static int __init arch_init_ftrace_syscalls(void) { int i; -- cgit v1.1 From 0ac676fb50f5f8a22e5e80afc40bf38e31b77c00 Mon Sep 17 00:00:00 2001 From: Jason Baron <jbaron@redhat.com> Date: Mon, 10 Aug 2009 16:53:11 -0400 Subject: tracing: Convert x86_64 mmap and uname to use DEFINE_SYSCALL A number of syscalls are not using 'DEFINE_SYSCALL'. I'm not sure why. Convert x86_64 uname and mmap to use DEFINE_SYSCALL. Signed-off-by: Jason Baron <jbaron@redhat.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Martin Bligh <mbligh@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> --- arch/x86/kernel/sys_x86_64.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/sys_x86_64.c b/arch/x86/kernel/sys_x86_64.c index 6bc211a..45e00eb 100644 --- a/arch/x86/kernel/sys_x86_64.c +++ b/arch/x86/kernel/sys_x86_64.c @@ -18,9 +18,9 @@ #include <asm/ia32.h> #include <asm/syscalls.h> -asmlinkage long sys_mmap(unsigned long addr, unsigned long len, - unsigned long prot, unsigned long flags, - unsigned long fd, unsigned long off) +SYSCALL_DEFINE6(mmap, unsigned long, addr, unsigned long, len, + unsigned long, prot, unsigned long, flags, + unsigned long, fd, unsigned long, off) { long error; struct file *file; @@ -226,7 +226,7 @@ bottomup: } -asmlinkage long sys_uname(struct new_utsname __user *name) +SYSCALL_DEFINE1(uname, struct new_utsname __user *, name) { int err; down_read(&uts_sem); -- cgit v1.1 From 51b89f7a6615eca184aa0b85db5781d931e9c8d1 Mon Sep 17 00:00:00 2001 From: Fenghua Yu <[fenghua.yu@intel.com]> Date: Tue, 11 Aug 2009 14:52:10 -0700 Subject: Bug Fix arch/ia64/kernel/pci-dma.c: fix recursive dma_supported() call in iommu_dma_supported() In commit 160c1d8e40866edfeae7d68816b7005d70acf391, dma_ops->dma_supported = iommu_dma_supported; This dma_ops->dma_supported is first called in platform_dma_init() during kernel boot. Then dma_ops->dma_supported will be called recursively in iommu_dma_supported. Kernel can not boot because kernel can not get out of iommu_dma_supported until it runs out of stack memory. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> --- arch/ia64/kernel/pci-dma.c | 5 ----- 1 file changed, 5 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/pci-dma.c b/arch/ia64/kernel/pci-dma.c index 0569596..f6b1ff0 100644 --- a/arch/ia64/kernel/pci-dma.c +++ b/arch/ia64/kernel/pci-dma.c @@ -69,11 +69,6 @@ iommu_dma_init(void) int iommu_dma_supported(struct device *dev, u64 mask) { - struct dma_map_ops *ops = platform_dma_get_ops(dev); - - if (ops->dma_supported) - return ops->dma_supported(dev, mask); - /* Copied from i386. Doesn't make much sense, because it will only work for pci_alloc_coherent. The caller just has to use GFP_DMA in this case. */ -- cgit v1.1 From 8d6f9af91959256244878cd801c1c969e66cd093 Mon Sep 17 00:00:00 2001 From: Johannes Weiner <[hannes@cmpxchg.org]> Date: Tue, 11 Aug 2009 14:52:10 -0700 Subject: ia64: boolean __test_and_clear_bit __test_and_clear_bit() returns a bitfield with the tested-for bit set. Make it consistent with the other bitops - of ia64 but also every other architecture - and return a boolean value. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Fenghua Yu <fenghua.yu@intel.com> --- arch/ia64/include/asm/bitops.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/ia64/include/asm/bitops.h b/arch/ia64/include/asm/bitops.h index e2ca800..57a2787 100644 --- a/arch/ia64/include/asm/bitops.h +++ b/arch/ia64/include/asm/bitops.h @@ -286,7 +286,7 @@ __test_and_clear_bit(int nr, volatile void * addr) { __u32 *p = (__u32 *) addr + (nr >> 5); __u32 m = 1 << (nr & 31); - int oldbitset = *p & m; + int oldbitset = (*p & m) != 0; *p &= ~m; return oldbitset; -- cgit v1.1 From cfa5f809e399c699974ba6018eefa022bbc2e16e Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput <[jaswinder@kernel.org]> Date: Tue, 11 Aug 2009 14:52:10 -0700 Subject: IA64: includecheck fix: ia64, ia64_ksyms.c fix the following 'make includecheck' warning: arch/ia64/kernel/ia64_ksyms.c: asm/page.h is included more than once. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Acked-by: Fenghua Yu <fenghua.yu@intel.com> --- arch/ia64/kernel/ia64_ksyms.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/ia64_ksyms.c b/arch/ia64/kernel/ia64_ksyms.c index 2d31186..8ebccb5 100644 --- a/arch/ia64/kernel/ia64_ksyms.c +++ b/arch/ia64/kernel/ia64_ksyms.c @@ -21,6 +21,7 @@ EXPORT_SYMBOL(csum_ipv6_magic); #include <asm/page.h> EXPORT_SYMBOL(clear_page); +EXPORT_SYMBOL(copy_page); #ifdef CONFIG_VIRTUAL_MEM_MAP #include <linux/bootmem.h> @@ -60,9 +61,6 @@ EXPORT_SYMBOL(__udivdi3); EXPORT_SYMBOL(__moddi3); EXPORT_SYMBOL(__umoddi3); -#include <asm/page.h> -EXPORT_SYMBOL(copy_page); - #if defined(CONFIG_MD_RAID456) || defined(CONFIG_MD_RAID456_MODULE) extern void xor_ia64_2(void); extern void xor_ia64_3(void); -- cgit v1.1 From b5a8879347bbe68bd24c8870503bf6a0362da26b Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput <[jaswinder@kernel.org]> Date: Tue, 11 Aug 2009 14:52:11 -0700 Subject: IA64: includecheck fix: ia64, pgtable.h fix the following 'make includecheck' warning: arch/ia64/include/asm/pgtable.h: asm/processor.h is included more than once. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Acked-by: Fenghua Yu <fenghua.yu@intel.com> --- arch/ia64/include/asm/pgtable.h | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/ia64/include/asm/pgtable.h b/arch/ia64/include/asm/pgtable.h index 0a9cc73..8840a69 100644 --- a/arch/ia64/include/asm/pgtable.h +++ b/arch/ia64/include/asm/pgtable.h @@ -155,7 +155,6 @@ #include <linux/bitops.h> #include <asm/cacheflush.h> #include <asm/mmu_context.h> -#include <asm/processor.h> /* * Next come the mappings that determine how mmap() protection bits -- cgit v1.1 From bf2a4c7270b9a22243a91ab5efcc47aaf997c66b Mon Sep 17 00:00:00 2001 From: Fenghua Yu <[fenghua.yu@intel.com]> Date: Tue, 11 Aug 2009 14:52:11 -0700 Subject: arch/ia64/Makefile: Remove -mtune=merced in IA64 kernel build Between GCC version 3.4.0 and 4.3.3 (including 3.4.0 and 4.3.3), -mtune=merced is implemented in GCC. Starting from 4.4.0, -mtune=merced is deprecated. Even implemented in versions between 3.4.0 and 4.3.3, the -mtune=merced feature has been broken in some of the versions. For example, GCC 4.1.2 reports interanl tuning function errors during kernel building with -mtune=merced. Or GCC Bugzilla 16130 reports another -mtune=merced issue on GCC 3.4.1. So I would remove the -mtune=merced from IA64 kernel build. Without this option, kernel on Merced will remain the same except losing an unstable and out-of-date performance tunning feature. Since GCC version 3.4.0, -mtune=mckinley has been implemented. The -mtune=mckinley option functions the same as mtune=itanium2. And mtune=itanium2 is the default option. So we don't need to add mtune=mckinley either since its been the default option in any GCC version which implements this option. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> --- arch/ia64/Makefile | 5 ----- 1 file changed, 5 deletions(-) (limited to 'arch') diff --git a/arch/ia64/Makefile b/arch/ia64/Makefile index 58a7e46a..e7cbaa0 100644 --- a/arch/ia64/Makefile +++ b/arch/ia64/Makefile @@ -41,11 +41,6 @@ $(error Sorry, you need a newer version of the assember, one that is built from ftp://ftp.hpl.hp.com/pub/linux-ia64/gas-030124.tar.gz) endif -ifeq ($(call cc-version),0304) - cflags-$(CONFIG_ITANIUM) += -mtune=merced - cflags-$(CONFIG_MCKINLEY) += -mtune=mckinley -endif - KBUILD_CFLAGS += $(cflags-y) head-y := arch/ia64/kernel/head.o arch/ia64/kernel/init_task.o -- cgit v1.1 From 5359dffd4396f281c5b77de1acbee6fb1b333b23 Mon Sep 17 00:00:00 2001 From: Fenghua Yu <fenghua.yu@intel.com> Date: Tue, 11 Aug 2009 14:52:11 -0700 Subject: ia64/topology.c: exit cache_add_dev when kobject_init_and_add fails Make cache_add_dev exit sysfs when kobject_init_and_add returns an error. Signed-off-by: Xiaotian Feng <dfeng@redhat.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> --- arch/ia64/kernel/topology.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/ia64/kernel/topology.c b/arch/ia64/kernel/topology.c index bc80dff..8f06035 100644 --- a/arch/ia64/kernel/topology.c +++ b/arch/ia64/kernel/topology.c @@ -372,6 +372,10 @@ static int __cpuinit cache_add_dev(struct sys_device * sys_dev) retval = kobject_init_and_add(&all_cpu_cache_info[cpu].kobj, &cache_ktype_percpu_entry, &sys_dev->kobj, "%s", "cache"); + if (unlikely(retval < 0)) { + cpu_cache_sysfs_exit(cpu); + return retval; + } for (i = 0; i < all_cpu_cache_info[cpu].num_cache_leaves; i++) { this_object = LEAF_KOBJECT_PTR(cpu,i); @@ -385,7 +389,7 @@ static int __cpuinit cache_add_dev(struct sys_device * sys_dev) } kobject_put(&all_cpu_cache_info[cpu].kobj); cpu_cache_sysfs_exit(cpu); - break; + return retval; } kobject_uevent(&(this_object->kobj), KOBJ_ADD); } -- cgit v1.1 From e7369e01eb85550ed60dd1b0e120b69dfb03dc23 Mon Sep 17 00:00:00 2001 From: Roel Kluin <[roel.kluin@gmail.com]> Date: Tue, 11 Aug 2009 14:52:11 -0700 Subject: arch/ia64/kernel/iosapic: missing test after ioremap() Missing test after ioremap() Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Fenghua Yu <fenghua.yu@intel.com> --- arch/ia64/kernel/iosapic.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/ia64/kernel/iosapic.c b/arch/ia64/kernel/iosapic.c index c48b03f..dab4d39 100644 --- a/arch/ia64/kernel/iosapic.c +++ b/arch/ia64/kernel/iosapic.c @@ -1072,6 +1072,10 @@ iosapic_init (unsigned long phys_addr, unsigned int gsi_base) } addr = ioremap(phys_addr, 0); + if (addr == NULL) { + spin_unlock_irqrestore(&iosapic_lock, flags); + return -ENOMEM; + } ver = iosapic_version(addr); if ((err = iosapic_check_gsi_range(gsi_base, ver))) { iounmap(addr); -- cgit v1.1 From e8055139d996e85722984968472868d6dccb1490 Mon Sep 17 00:00:00 2001 From: Ondrej Zary <linux@rainbow-software.org> Date: Tue, 11 Aug 2009 20:00:11 +0200 Subject: x86: Fix oops in identify_cpu() on CPUs without CPUID Kernel is broken for x86 CPUs without CPUID since 2.6.28. It crashes with NULL pointer dereference in identify_cpu(): 766 generic_identify(c); 767 768--> if (this_cpu->c_identify) 769 this_cpu->c_identify(c); this_cpu is NULL. This is because it's only initialized in get_cpu_vendor() function, which is not called if the CPU has no CPUID instruction. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> LKML-Reference: <200908112000.15993.linux@rainbow-software.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/kernel/cpu/common.c | 48 ++++++++++++++++++++++---------------------- 1 file changed, 24 insertions(+), 24 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index f1961c0..5ce60a8 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -59,7 +59,30 @@ void __init setup_cpu_local_masks(void) alloc_bootmem_cpumask_var(&cpu_sibling_setup_mask); } -static const struct cpu_dev *this_cpu __cpuinitdata; +static void __cpuinit default_init(struct cpuinfo_x86 *c) +{ +#ifdef CONFIG_X86_64 + display_cacheinfo(c); +#else + /* Not much we can do here... */ + /* Check if at least it has cpuid */ + if (c->cpuid_level == -1) { + /* No cpuid. It must be an ancient CPU */ + if (c->x86 == 4) + strcpy(c->x86_model_id, "486"); + else if (c->x86 == 3) + strcpy(c->x86_model_id, "386"); + } +#endif +} + +static const struct cpu_dev __cpuinitconst default_cpu = { + .c_init = default_init, + .c_vendor = "Unknown", + .c_x86_vendor = X86_VENDOR_UNKNOWN, +}; + +static const struct cpu_dev *this_cpu __cpuinitdata = &default_cpu; DEFINE_PER_CPU_PAGE_ALIGNED(struct gdt_page, gdt_page) = { .gdt = { #ifdef CONFIG_X86_64 @@ -332,29 +355,6 @@ void switch_to_new_gdt(int cpu) static const struct cpu_dev *__cpuinitdata cpu_devs[X86_VENDOR_NUM] = {}; -static void __cpuinit default_init(struct cpuinfo_x86 *c) -{ -#ifdef CONFIG_X86_64 - display_cacheinfo(c); -#else - /* Not much we can do here... */ - /* Check if at least it has cpuid */ - if (c->cpuid_level == -1) { - /* No cpuid. It must be an ancient CPU */ - if (c->x86 == 4) - strcpy(c->x86_model_id, "486"); - else if (c->x86 == 3) - strcpy(c->x86_model_id, "386"); - } -#endif -} - -static const struct cpu_dev __cpuinitconst default_cpu = { - .c_init = default_init, - .c_vendor = "Unknown", - .c_x86_vendor = X86_VENDOR_UNKNOWN, -}; - static void __cpuinit get_model_name(struct cpuinfo_x86 *c) { unsigned int *v; -- cgit v1.1 From 04da8a43da804723a550f00dd158fd5b5e25ae35 Mon Sep 17 00:00:00 2001 From: Ingo Molnar <mingo@elte.hu> Date: Tue, 11 Aug 2009 10:40:08 +0200 Subject: perf_counter, x86: Fix/improve apic fallback Johannes Stezenbach reported that his Pentium-M based laptop does not have the local APIC enabled by default, and hence perfcounters do not get initialized. Add a fallback for this case: allow non-sampled counters and return with an error on sampled counters. This allows 'perf stat' to work out of box - and allows 'perf top' and 'perf record' to fall back on a hrtimer based sampling method. ( Passing 'lapic' on the boot line will allow hardware sampling to occur - but if the APIC is disabled permanently by the hardware then this fallback still allows more systems to use perfcounters. ) Also decouple perfcounter support from X86_LOCAL_APIC. -v2: fix typo breaking counters on all other systems ... Reported-by: Johannes Stezenbach <js@sig21.net> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/Kconfig | 2 +- arch/x86/kernel/cpu/perf_counter.c | 34 ++++++++++++++++++++++++++++++---- 2 files changed, 31 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 738bdc6..13ffa5d 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -24,6 +24,7 @@ config X86 select HAVE_UNSTABLE_SCHED_CLOCK select HAVE_IDE select HAVE_OPROFILE + select HAVE_PERF_COUNTERS if (!M386 && !M486) select HAVE_IOREMAP_PROT select HAVE_KPROBES select ARCH_WANT_OPTIONAL_GPIOLIB @@ -742,7 +743,6 @@ config X86_UP_IOAPIC config X86_LOCAL_APIC def_bool y depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_APIC - select HAVE_PERF_COUNTERS if (!M386 && !M486) config X86_IO_APIC def_bool y diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c index fffc126..900332b 100644 --- a/arch/x86/kernel/cpu/perf_counter.c +++ b/arch/x86/kernel/cpu/perf_counter.c @@ -55,6 +55,7 @@ struct x86_pmu { int num_counters_fixed; int counter_bits; u64 counter_mask; + int apic; u64 max_period; u64 intel_ctrl; }; @@ -613,6 +614,7 @@ static DEFINE_MUTEX(pmc_reserve_mutex); static bool reserve_pmc_hardware(void) { +#ifdef CONFIG_X86_LOCAL_APIC int i; if (nmi_watchdog == NMI_LOCAL_APIC) @@ -627,9 +629,11 @@ static bool reserve_pmc_hardware(void) if (!reserve_evntsel_nmi(x86_pmu.eventsel + i)) goto eventsel_fail; } +#endif return true; +#ifdef CONFIG_X86_LOCAL_APIC eventsel_fail: for (i--; i >= 0; i--) release_evntsel_nmi(x86_pmu.eventsel + i); @@ -644,10 +648,12 @@ perfctr_fail: enable_lapic_nmi_watchdog(); return false; +#endif } static void release_pmc_hardware(void) { +#ifdef CONFIG_X86_LOCAL_APIC int i; for (i = 0; i < x86_pmu.num_counters; i++) { @@ -657,6 +663,7 @@ static void release_pmc_hardware(void) if (nmi_watchdog == NMI_LOCAL_APIC) enable_lapic_nmi_watchdog(); +#endif } static void hw_perf_counter_destroy(struct perf_counter *counter) @@ -748,6 +755,15 @@ static int __hw_perf_counter_init(struct perf_counter *counter) hwc->sample_period = x86_pmu.max_period; hwc->last_period = hwc->sample_period; atomic64_set(&hwc->period_left, hwc->sample_period); + } else { + /* + * If we have a PMU initialized but no APIC + * interrupts, we cannot sample hardware + * counters (user-space has to fall back and + * sample via a hrtimer based software counter): + */ + if (!x86_pmu.apic) + return -EOPNOTSUPP; } counter->destroy = hw_perf_counter_destroy; @@ -1449,18 +1465,22 @@ void smp_perf_pending_interrupt(struct pt_regs *regs) void set_perf_counter_pending(void) { +#ifdef CONFIG_X86_LOCAL_APIC apic->send_IPI_self(LOCAL_PENDING_VECTOR); +#endif } void perf_counters_lapic_init(void) { - if (!x86_pmu_initialized()) +#ifdef CONFIG_X86_LOCAL_APIC + if (!x86_pmu.apic || !x86_pmu_initialized()) return; /* * Always use NMI for PMU */ apic_write(APIC_LVTPC, APIC_DM_NMI); +#endif } static int __kprobes @@ -1484,7 +1504,9 @@ perf_counter_nmi_handler(struct notifier_block *self, regs = args->regs; +#ifdef CONFIG_X86_LOCAL_APIC apic_write(APIC_LVTPC, APIC_DM_NMI); +#endif /* * Can't rely on the handled return value to say it was our NMI, two * counters could trigger 'simultaneously' raising two back-to-back NMIs. @@ -1515,6 +1537,7 @@ static struct x86_pmu p6_pmu = { .event_map = p6_pmu_event_map, .raw_event = p6_pmu_raw_event, .max_events = ARRAY_SIZE(p6_perfmon_event_map), + .apic = 1, .max_period = (1ULL << 31) - 1, .version = 0, .num_counters = 2, @@ -1541,6 +1564,7 @@ static struct x86_pmu intel_pmu = { .event_map = intel_pmu_event_map, .raw_event = intel_pmu_raw_event, .max_events = ARRAY_SIZE(intel_perfmon_event_map), + .apic = 1, /* * Intel PMCs cannot be accessed sanely above 32 bit width, * so we install an artificial 1<<31 period regardless of @@ -1564,6 +1588,7 @@ static struct x86_pmu amd_pmu = { .num_counters = 4, .counter_bits = 48, .counter_mask = (1ULL << 48) - 1, + .apic = 1, /* use highest bit to detect overflow */ .max_period = (1ULL << 47) - 1, }; @@ -1589,13 +1614,14 @@ static int p6_pmu_init(void) return -ENODEV; } + x86_pmu = p6_pmu; + if (!cpu_has_apic) { pr_info("no APIC, boot with the \"lapic\" boot parameter to force-enable it.\n"); - return -ENODEV; + pr_info("no hardware sampling interrupt available.\n"); + x86_pmu.apic = 0; } - x86_pmu = p6_pmu; - return 0; } -- cgit v1.1 From ba9a633787eed1e90d587282642580ad3d44f7fd Mon Sep 17 00:00:00 2001 From: Magnus Damm <damm@igel.co.jp> Date: Wed, 22 Jul 2009 15:14:29 +0000 Subject: sh: convert processor device setup functions to arch_initcall() Convert the processor platform device setup functions from __initcall() and sometimes device_initcall() to arch_initcall(). This makes sure that the platform devices are registered a bit earlier so the devices are available when drivers register using initcall levels earlier than device_initcall(). A good example is platform devices needed by i2c-sh_mobile.c which registers a bit earlier using subsys_initcall(). Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/kernel/cpu/sh2/setup-sh7619.c | 2 +- arch/sh/kernel/cpu/sh2a/setup-mxg.c | 2 +- arch/sh/kernel/cpu/sh2a/setup-sh7201.c | 2 +- arch/sh/kernel/cpu/sh2a/setup-sh7203.c | 2 +- arch/sh/kernel/cpu/sh2a/setup-sh7206.c | 2 +- arch/sh/kernel/cpu/sh3/setup-sh7705.c | 2 +- arch/sh/kernel/cpu/sh3/setup-sh770x.c | 2 +- arch/sh/kernel/cpu/sh3/setup-sh7710.c | 2 +- arch/sh/kernel/cpu/sh3/setup-sh7720.c | 2 +- arch/sh/kernel/cpu/sh4/setup-sh4-202.c | 2 +- arch/sh/kernel/cpu/sh4/setup-sh7750.c | 2 +- arch/sh/kernel/cpu/sh4/setup-sh7760.c | 2 +- arch/sh/kernel/cpu/sh4a/setup-sh7343.c | 2 +- arch/sh/kernel/cpu/sh4a/setup-sh7366.c | 2 +- arch/sh/kernel/cpu/sh4a/setup-sh7722.c | 2 +- arch/sh/kernel/cpu/sh4a/setup-sh7723.c | 2 +- arch/sh/kernel/cpu/sh4a/setup-sh7724.c | 2 +- arch/sh/kernel/cpu/sh4a/setup-sh7763.c | 2 +- arch/sh/kernel/cpu/sh4a/setup-sh7770.c | 2 +- arch/sh/kernel/cpu/sh4a/setup-sh7780.c | 2 +- arch/sh/kernel/cpu/sh4a/setup-sh7785.c | 2 +- arch/sh/kernel/cpu/sh4a/setup-sh7786.c | 2 +- arch/sh/kernel/cpu/sh4a/setup-shx3.c | 2 +- arch/sh/kernel/cpu/sh5/setup-sh5.c | 2 +- 24 files changed, 24 insertions(+), 24 deletions(-) (limited to 'arch') diff --git a/arch/sh/kernel/cpu/sh2/setup-sh7619.c b/arch/sh/kernel/cpu/sh2/setup-sh7619.c index 1379873..8555c05 100644 --- a/arch/sh/kernel/cpu/sh2/setup-sh7619.c +++ b/arch/sh/kernel/cpu/sh2/setup-sh7619.c @@ -187,7 +187,7 @@ static int __init sh7619_devices_setup(void) return platform_add_devices(sh7619_devices, ARRAY_SIZE(sh7619_devices)); } -__initcall(sh7619_devices_setup); +arch_initcall(sh7619_devices_setup); void __init plat_irq_setup(void) { diff --git a/arch/sh/kernel/cpu/sh2a/setup-mxg.c b/arch/sh/kernel/cpu/sh2a/setup-mxg.c index 869c2da..b673764 100644 --- a/arch/sh/kernel/cpu/sh2a/setup-mxg.c +++ b/arch/sh/kernel/cpu/sh2a/setup-mxg.c @@ -238,7 +238,7 @@ static int __init mxg_devices_setup(void) return platform_add_devices(mxg_devices, ARRAY_SIZE(mxg_devices)); } -__initcall(mxg_devices_setup); +arch_initcall(mxg_devices_setup); void __init plat_irq_setup(void) { diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7201.c b/arch/sh/kernel/cpu/sh2a/setup-sh7201.c index d8febe1..fbde5b7 100644 --- a/arch/sh/kernel/cpu/sh2a/setup-sh7201.c +++ b/arch/sh/kernel/cpu/sh2a/setup-sh7201.c @@ -357,7 +357,7 @@ static int __init sh7201_devices_setup(void) return platform_add_devices(sh7201_devices, ARRAY_SIZE(sh7201_devices)); } -__initcall(sh7201_devices_setup); +arch_initcall(sh7201_devices_setup); void __init plat_irq_setup(void) { diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c index 62e3039..d3fd536 100644 --- a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c +++ b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c @@ -367,7 +367,7 @@ static int __init sh7203_devices_setup(void) return platform_add_devices(sh7203_devices, ARRAY_SIZE(sh7203_devices)); } -__initcall(sh7203_devices_setup); +arch_initcall(sh7203_devices_setup); void __init plat_irq_setup(void) { diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c index 3e6f3d7..a9ccc5e 100644 --- a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c +++ b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c @@ -338,7 +338,7 @@ static int __init sh7206_devices_setup(void) return platform_add_devices(sh7206_devices, ARRAY_SIZE(sh7206_devices)); } -__initcall(sh7206_devices_setup); +arch_initcall(sh7206_devices_setup); void __init plat_irq_setup(void) { diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7705.c b/arch/sh/kernel/cpu/sh3/setup-sh7705.c index 88f742f..c231059 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7705.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7705.c @@ -222,7 +222,7 @@ static int __init sh7705_devices_setup(void) return platform_add_devices(sh7705_devices, ARRAY_SIZE(sh7705_devices)); } -__initcall(sh7705_devices_setup); +arch_initcall(sh7705_devices_setup); static struct platform_device *sh7705_early_devices[] __initdata = { &tmu0_device, diff --git a/arch/sh/kernel/cpu/sh3/setup-sh770x.c b/arch/sh/kernel/cpu/sh3/setup-sh770x.c index c563067..347ab35 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh770x.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh770x.c @@ -250,7 +250,7 @@ static int __init sh770x_devices_setup(void) return platform_add_devices(sh770x_devices, ARRAY_SIZE(sh770x_devices)); } -__initcall(sh770x_devices_setup); +arch_initcall(sh770x_devices_setup); static struct platform_device *sh770x_early_devices[] __initdata = { &tmu0_device, diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7710.c b/arch/sh/kernel/cpu/sh3/setup-sh7710.c index efa76c8..717e90a 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7710.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7710.c @@ -226,7 +226,7 @@ static int __init sh7710_devices_setup(void) return platform_add_devices(sh7710_devices, ARRAY_SIZE(sh7710_devices)); } -__initcall(sh7710_devices_setup); +arch_initcall(sh7710_devices_setup); static struct platform_device *sh7710_early_devices[] __initdata = { &tmu0_device, diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7720.c b/arch/sh/kernel/cpu/sh3/setup-sh7720.c index 5b21077..74d8baa 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7720.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7720.c @@ -388,7 +388,7 @@ static int __init sh7720_devices_setup(void) return platform_add_devices(sh7720_devices, ARRAY_SIZE(sh7720_devices)); } -__initcall(sh7720_devices_setup); +arch_initcall(sh7720_devices_setup); static struct platform_device *sh7720_early_devices[] __initdata = { &cmt0_device, diff --git a/arch/sh/kernel/cpu/sh4/setup-sh4-202.c b/arch/sh/kernel/cpu/sh4/setup-sh4-202.c index 6d088d1..de4827d 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh4-202.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh4-202.c @@ -138,7 +138,7 @@ static int __init sh4202_devices_setup(void) return platform_add_devices(sh4202_devices, ARRAY_SIZE(sh4202_devices)); } -__initcall(sh4202_devices_setup); +arch_initcall(sh4202_devices_setup); static struct platform_device *sh4202_early_devices[] __initdata = { &tmu0_device, diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7750.c b/arch/sh/kernel/cpu/sh4/setup-sh7750.c index 851672d..1b8b122 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh7750.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh7750.c @@ -239,7 +239,7 @@ static int __init sh7750_devices_setup(void) return platform_add_devices(sh7750_devices, ARRAY_SIZE(sh7750_devices)); } -__initcall(sh7750_devices_setup); +arch_initcall(sh7750_devices_setup); static struct platform_device *sh7750_early_devices[] __initdata = { &tmu0_device, diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7760.c b/arch/sh/kernel/cpu/sh4/setup-sh7760.c index 5b82251..7fbb7be 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh7760.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh7760.c @@ -265,7 +265,7 @@ static int __init sh7760_devices_setup(void) return platform_add_devices(sh7760_devices, ARRAY_SIZE(sh7760_devices)); } -__initcall(sh7760_devices_setup); +arch_initcall(sh7760_devices_setup); static struct platform_device *sh7760_early_devices[] __initdata = { &tmu0_device, diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c index 6307e08..ac4d567 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c @@ -325,7 +325,7 @@ static int __init sh7343_devices_setup(void) return platform_add_devices(sh7343_devices, ARRAY_SIZE(sh7343_devices)); } -__initcall(sh7343_devices_setup); +arch_initcall(sh7343_devices_setup); static struct platform_device *sh7343_early_devices[] __initdata = { &cmt_device, diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c index c18f7d0..1a956b1 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c @@ -318,7 +318,7 @@ static int __init sh7366_devices_setup(void) return platform_add_devices(sh7366_devices, ARRAY_SIZE(sh7366_devices)); } -__initcall(sh7366_devices_setup); +arch_initcall(sh7366_devices_setup); static struct platform_device *sh7366_early_devices[] __initdata = { &cmt_device, diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c index ea524a2..cda76eb 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c @@ -359,7 +359,7 @@ static int __init sh7722_devices_setup(void) return platform_add_devices(sh7722_devices, ARRAY_SIZE(sh7722_devices)); } -__initcall(sh7722_devices_setup); +arch_initcall(sh7722_devices_setup); static struct platform_device *sh7722_early_devices[] __initdata = { &cmt_device, diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c index e1bb80b..b45dace 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c @@ -473,7 +473,7 @@ static int __init sh7723_devices_setup(void) return platform_add_devices(sh7723_devices, ARRAY_SIZE(sh7723_devices)); } -__initcall(sh7723_devices_setup); +arch_initcall(sh7723_devices_setup); static struct platform_device *sh7723_early_devices[] __initdata = { &cmt_device, diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c index e5ac9eb..a04edaa 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c @@ -508,7 +508,7 @@ static int __init sh7724_devices_setup(void) return platform_add_devices(sh7724_devices, ARRAY_SIZE(sh7724_devices)); } -device_initcall(sh7724_devices_setup); +arch_initcall(sh7724_devices_setup); static struct platform_device *sh7724_early_devices[] __initdata = { &cmt_device, diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c index f1e0c0d..4659fff 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c @@ -314,7 +314,7 @@ static int __init sh7763_devices_setup(void) return platform_add_devices(sh7763_devices, ARRAY_SIZE(sh7763_devices)); } -__initcall(sh7763_devices_setup); +arch_initcall(sh7763_devices_setup); static struct platform_device *sh7763_early_devices[] __initdata = { &tmu0_device, diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7770.c b/arch/sh/kernel/cpu/sh4a/setup-sh7770.c index 1e86209..eead08d 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7770.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7770.c @@ -368,7 +368,7 @@ static int __init sh7770_devices_setup(void) return platform_add_devices(sh7770_devices, ARRAY_SIZE(sh7770_devices)); } -__initcall(sh7770_devices_setup); +arch_initcall(sh7770_devices_setup); static struct platform_device *sh7770_early_devices[] __initdata = { &tmu0_device, diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c index 715e05b..2c901f4 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c @@ -256,7 +256,7 @@ static int __init sh7780_devices_setup(void) return platform_add_devices(sh7780_devices, ARRAY_SIZE(sh7780_devices)); } -__initcall(sh7780_devices_setup); +arch_initcall(sh7780_devices_setup); static struct platform_device *sh7780_early_devices[] __initdata = { &tmu0_device, diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c index af56140..7f6c718 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c @@ -263,7 +263,7 @@ static int __init sh7785_devices_setup(void) return platform_add_devices(sh7785_devices, ARRAY_SIZE(sh7785_devices)); } -__initcall(sh7785_devices_setup); +arch_initcall(sh7785_devices_setup); static struct platform_device *sh7785_early_devices[] __initdata = { &tmu0_device, diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c index b700494..0104a8e 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c @@ -547,7 +547,7 @@ static int __init sh7786_devices_setup(void) return platform_add_devices(sh7786_devices, ARRAY_SIZE(sh7786_devices)); } -device_initcall(sh7786_devices_setup); +arch_initcall(sh7786_devices_setup); void __init plat_early_device_setup(void) { diff --git a/arch/sh/kernel/cpu/sh4a/setup-shx3.c b/arch/sh/kernel/cpu/sh4a/setup-shx3.c index 53c65fd..07f0789 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-shx3.c +++ b/arch/sh/kernel/cpu/sh4a/setup-shx3.c @@ -256,7 +256,7 @@ static int __init shx3_devices_setup(void) return platform_add_devices(shx3_devices, ARRAY_SIZE(shx3_devices)); } -__initcall(shx3_devices_setup); +arch_initcall(shx3_devices_setup); void __init plat_early_device_setup(void) { diff --git a/arch/sh/kernel/cpu/sh5/setup-sh5.c b/arch/sh/kernel/cpu/sh5/setup-sh5.c index f5ff1ac..6a0f82f 100644 --- a/arch/sh/kernel/cpu/sh5/setup-sh5.c +++ b/arch/sh/kernel/cpu/sh5/setup-sh5.c @@ -186,7 +186,7 @@ static int __init sh5_devices_setup(void) return platform_add_devices(sh5_devices, ARRAY_SIZE(sh5_devices)); } -__initcall(sh5_devices_setup); +arch_initcall(sh5_devices_setup); void __init plat_early_device_setup(void) { -- cgit v1.1 From ba3a17019181af5d6ab898760620c4e9916396c2 Mon Sep 17 00:00:00 2001 From: Magnus Damm <damm@igel.co.jp> Date: Thu, 13 Aug 2009 11:39:02 +0900 Subject: sh: fix i2c init order on Migo-R V2 Convert the Migo-R board code to register devices at arch_initcall() time instead of __initcall(). This fix unbreaks migor_ts touch screen driver support. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/boards/mach-migor/setup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c index f70f4644..f9b2e4d 100644 --- a/arch/sh/boards/mach-migor/setup.c +++ b/arch/sh/boards/mach-migor/setup.c @@ -608,7 +608,7 @@ static int __init migor_devices_setup(void) return platform_add_devices(migor_devices, ARRAY_SIZE(migor_devices)); } -__initcall(migor_devices_setup); +arch_initcall(migor_devices_setup); /* Return the board specific boot mode pin configuration */ static int migor_mode_pins(void) -- cgit v1.1 From dbefd606a3b3634799b625f4900336e61c89e868 Mon Sep 17 00:00:00 2001 From: Magnus Damm <damm@igel.co.jp> Date: Fri, 7 Aug 2009 03:52:18 +0000 Subject: sh: fix i2c init order on ap325rxa V2 Convert the AP325RXA board code to register devices at arch_initcall() time instead of device_initcall(). This fix unbreaks pcf8563 RTC driver support. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/boards/board-ap325rxa.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c index 7ffd1b43..b9c88cc 100644 --- a/arch/sh/boards/board-ap325rxa.c +++ b/arch/sh/boards/board-ap325rxa.c @@ -547,7 +547,7 @@ static int __init ap325rxa_devices_setup(void) return platform_add_devices(ap325rxa_devices, ARRAY_SIZE(ap325rxa_devices)); } -device_initcall(ap325rxa_devices_setup); +arch_initcall(ap325rxa_devices_setup); /* Return the board specific boot mode pin configuration */ static int ap325rxa_mode_pins(void) -- cgit v1.1 From 48ec45e725aa385d72bced73b267dfaf13351876 Mon Sep 17 00:00:00 2001 From: Davide Rizzo <elpa.rizzo@gmail.com> Date: Thu, 13 Aug 2009 11:53:53 +0200 Subject: ARM: S3C24XX: Fix clkout mpx error Bug correction: CLK Outputs cannot have XTAL as parent Signed-off-by: Davide Rizzo <elpa.rizzo@gmail.com> [ben-linux@fluff.org: updated patch subject] Signed-off-by: Ben Dooks <ben-linux@fluff.org> --- arch/arm/plat-s3c24xx/clock-dclk.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-s3c24xx/clock-dclk.c b/arch/arm/plat-s3c24xx/clock-dclk.c index 5b75a79..0afb217 100644 --- a/arch/arm/plat-s3c24xx/clock-dclk.c +++ b/arch/arm/plat-s3c24xx/clock-dclk.c @@ -129,7 +129,7 @@ static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent) /* calculate the MISCCR setting for the clock */ - if (parent == &clk_xtal) + if (parent == &clk_mpll) source = S3C2410_MISCCR_CLK0_MPLL; else if (parent == &clk_upll) source = S3C2410_MISCCR_CLK0_UPLL; -- cgit v1.1 From 74d46d6b2d23d44d72c37df4c6a5d2e782f7b088 Mon Sep 17 00:00:00 2001 From: Tejun Heo <tj@kernel.org> Date: Tue, 21 Jul 2009 17:11:50 +0900 Subject: percpu, sparc64: fix sparse possible cpu map handling percpu code has been assuming num_possible_cpus() == nr_cpu_ids which is incorrect if cpu_possible_map contains holes. This causes percpu code to access beyond allocated memories and vmalloc areas. On a sparc64 machine with cpus 0 and 2 (u60), this triggers the following warning or fails boot. WARNING: at /devel/tj/os/work/mm/vmalloc.c:106 vmap_page_range_noflush+0x1f0/0x240() Modules linked in: Call Trace: [00000000004b17d0] vmap_page_range_noflush+0x1f0/0x240 [00000000004b1840] map_vm_area+0x20/0x60 [00000000004b1950] __vmalloc_area_node+0xd0/0x160 [0000000000593434] deflate_init+0x14/0xe0 [0000000000583b94] __crypto_alloc_tfm+0xd4/0x1e0 [00000000005844f0] crypto_alloc_base+0x50/0xa0 [000000000058b898] alg_test_comp+0x18/0x80 [000000000058dad4] alg_test+0x54/0x180 [000000000058af00] cryptomgr_test+0x40/0x60 [0000000000473098] kthread+0x58/0x80 [000000000042b590] kernel_thread+0x30/0x60 [0000000000472fd0] kthreadd+0xf0/0x160 ---[ end trace 429b268a213317ba ]--- This patch fixes generic percpu functions and sparc64 setup_per_cpu_areas() so that they handle sparse cpu_possible_map properly. Please note that on x86, cpu_possible_map() doesn't contain holes and thus num_possible_cpus() == nr_cpu_ids and this patch doesn't cause any behavior difference. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: David S. Miller <davem@davemloft.net> Cc: Ingo Molnar <mingo@elte.hu> --- arch/sparc/kernel/smp_64.c | 4 ++-- arch/x86/kernel/setup_percpu.c | 14 +++++++------- 2 files changed, 9 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c index fa44eaf..3691907 100644 --- a/arch/sparc/kernel/smp_64.c +++ b/arch/sparc/kernel/smp_64.c @@ -1499,7 +1499,7 @@ void __init setup_per_cpu_areas(void) dyn_size = pcpur_size - static_size - PERCPU_MODULE_RESERVE; - ptrs_size = PFN_ALIGN(num_possible_cpus() * sizeof(pcpur_ptrs[0])); + ptrs_size = PFN_ALIGN(nr_cpu_ids * sizeof(pcpur_ptrs[0])); pcpur_ptrs = alloc_bootmem(ptrs_size); for_each_possible_cpu(cpu) { @@ -1514,7 +1514,7 @@ void __init setup_per_cpu_areas(void) /* allocate address and map */ vm.flags = VM_ALLOC; - vm.size = num_possible_cpus() * PCPU_CHUNK_SIZE; + vm.size = nr_cpu_ids * PCPU_CHUNK_SIZE; vm_area_register_early(&vm, PCPU_CHUNK_SIZE); for_each_possible_cpu(cpu) { diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c index 29a3eef..07d8191 100644 --- a/arch/x86/kernel/setup_percpu.c +++ b/arch/x86/kernel/setup_percpu.c @@ -165,7 +165,7 @@ static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen) if (!chosen) { size_t vm_size = VMALLOC_END - VMALLOC_START; - size_t tot_size = num_possible_cpus() * PMD_SIZE; + size_t tot_size = nr_cpu_ids * PMD_SIZE; /* on non-NUMA, embedding is better */ if (!pcpu_need_numa()) @@ -199,7 +199,7 @@ static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen) dyn_size = pcpul_size - static_size - PERCPU_FIRST_CHUNK_RESERVE; /* allocate pointer array and alloc large pages */ - map_size = PFN_ALIGN(num_possible_cpus() * sizeof(pcpul_map[0])); + map_size = PFN_ALIGN(nr_cpu_ids * sizeof(pcpul_map[0])); pcpul_map = alloc_bootmem(map_size); for_each_possible_cpu(cpu) { @@ -228,7 +228,7 @@ static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen) /* allocate address and map */ pcpul_vm.flags = VM_ALLOC; - pcpul_vm.size = num_possible_cpus() * PMD_SIZE; + pcpul_vm.size = nr_cpu_ids * PMD_SIZE; vm_area_register_early(&pcpul_vm, PMD_SIZE); for_each_possible_cpu(cpu) { @@ -250,8 +250,8 @@ static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen) PMD_SIZE, pcpul_vm.addr, NULL); /* sort pcpul_map array for pcpu_lpage_remapped() */ - for (i = 0; i < num_possible_cpus() - 1; i++) - for (j = i + 1; j < num_possible_cpus(); j++) + for (i = 0; i < nr_cpu_ids - 1; i++) + for (j = i + 1; j < nr_cpu_ids; j++) if (pcpul_map[i].ptr > pcpul_map[j].ptr) { struct pcpul_ent tmp = pcpul_map[i]; pcpul_map[i] = pcpul_map[j]; @@ -288,7 +288,7 @@ void *pcpu_lpage_remapped(void *kaddr) { void *pmd_addr = (void *)((unsigned long)kaddr & PMD_MASK); unsigned long offset = (unsigned long)kaddr & ~PMD_MASK; - int left = 0, right = num_possible_cpus() - 1; + int left = 0, right = nr_cpu_ids - 1; int pos; /* pcpul in use at all? */ @@ -377,7 +377,7 @@ static ssize_t __init setup_pcpu_4k(size_t static_size) pcpu4k_nr_static_pages = PFN_UP(static_size); /* unaligned allocations can't be freed, round up to page size */ - pages_size = PFN_ALIGN(pcpu4k_nr_static_pages * num_possible_cpus() + pages_size = PFN_ALIGN(pcpu4k_nr_static_pages * nr_cpu_ids * sizeof(pcpu4k_pages[0])); pcpu4k_pages = alloc_bootmem(pages_size); -- cgit v1.1 From 563abb4be1a79e7b64784d43beb9d0cacb1bad6f Mon Sep 17 00:00:00 2001 From: Valentin Longchamp <valentin.longchamp@epfl.ch> Date: Tue, 11 Aug 2009 17:29:21 +0200 Subject: mx31moboard: invert sdhc ro signal sense Small confusion with our hardware engineer, the WP signal (RO) is active low on our boards, the signal has to inverted. This is a pretty straightforward patch, it could even go to -rc, but if not, then push it for 2.6.32. Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> --- arch/arm/mach-mx3/mx31moboard-devboard.c | 2 +- arch/arm/mach-mx3/mx31moboard-marxbot.c | 2 +- arch/arm/mach-mx3/mx31moboard.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c index 4704405..b48581e 100644 --- a/arch/arm/mach-mx3/mx31moboard-devboard.c +++ b/arch/arm/mach-mx3/mx31moboard-devboard.c @@ -63,7 +63,7 @@ static struct imxuart_platform_data uart_pdata = { static int devboard_sdhc2_get_ro(struct device *dev) { - return gpio_get_value(SDHC2_WP); + return !gpio_get_value(SDHC2_WP); } static int devboard_sdhc2_init(struct device *dev, irq_handler_t detect_irq, diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c index 641c3d6..901fb01 100644 --- a/arch/arm/mach-mx3/mx31moboard-marxbot.c +++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c @@ -67,7 +67,7 @@ static unsigned int marxbot_pins[] = { static int marxbot_sdhc2_get_ro(struct device *dev) { - return gpio_get_value(SDHC2_WP); + return !gpio_get_value(SDHC2_WP); } static int marxbot_sdhc2_init(struct device *dev, irq_handler_t detect_irq, diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c index a17f2e4..2a2da47 100644 --- a/arch/arm/mach-mx3/mx31moboard.c +++ b/arch/arm/mach-mx3/mx31moboard.c @@ -94,7 +94,7 @@ static struct imxi2c_platform_data moboard_i2c1_pdata = { static int moboard_sdhc1_get_ro(struct device *dev) { - return gpio_get_value(SDHC1_WP); + return !gpio_get_value(SDHC1_WP); } static int moboard_sdhc1_init(struct device *dev, irq_handler_t detect_irq, -- cgit v1.1 From 9747e78b304b44d6fb73e2c8071406d55aa8bb75 Mon Sep 17 00:00:00 2001 From: Magnus Damm <damm@igel.co.jp> Date: Sat, 15 Aug 2009 02:53:34 +0000 Subject: sh: use in-soc KEYSC on se7724 This patch updates the Solution Engine 7724 board code to use in-SoC KEYSC resources for the keyboard platform device. Using the in-SoC key scan controller fixes a crash-during-resume issue. Without this patch the KEYSC hardware block located in the board specific FPGA is used together with an external IRQ which is routed through the FPGA and handled by some board specific demux code. This board specific FPGA interrupt code does not implement desc->set_wake() so the enable_irq_wake() call in the sh_keysc driver will fail at suspend-to-ram time and the disable_irq_wake() will bomb out when resuming. Changing the platform data to use the in-SoC KEYSC hardware makes the se7724 board support code less special which is a good thing. Also, the board specific KEYSC pin setup code selects in-SoC pin functions already which makes the current FPGA platform device data look like a typo. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/boards/mach-se/7724/setup.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c index 8fed45a..15456a0 100644 --- a/arch/sh/boards/mach-se/7724/setup.c +++ b/arch/sh/boards/mach-se/7724/setup.c @@ -238,7 +238,7 @@ static struct platform_device ceu1_device = { }, }; -/* KEYSC */ +/* KEYSC in SoC (Needs SW33-2 set to ON) */ static struct sh_keysc_info keysc_info = { .mode = SH_KEYSC_MODE_1, .scan_timing = 10, @@ -255,12 +255,13 @@ static struct sh_keysc_info keysc_info = { static struct resource keysc_resources[] = { [0] = { - .start = 0x1a204000, - .end = 0x1a20400f, + .name = "KEYSC", + .start = 0x044b0000, + .end = 0x044b000f, .flags = IORESOURCE_MEM, }, [1] = { - .start = IRQ0_KEY, + .start = 79, .flags = IORESOURCE_IRQ, }, }; -- cgit v1.1 From 237674e050ae8ea40a432412df6c15d60b7ae8a6 Mon Sep 17 00:00:00 2001 From: Magnus Damm <damm@igel.co.jp> Date: Sat, 15 Aug 2009 02:53:42 +0000 Subject: sh: sh7724 ddr self-refresh changes This patch updates the SuperH Mobile sleep assembly code with support for DBSC memory controller found in the sh7724 processor. Without this fix the memory hooked up to the sh7724 processor will never enter self-refresh mode before suspending to ram. The effect of this is that the memory contents most likeley will be lost upon resume which may or may not be what you want. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org> --- arch/sh/kernel/cpu/shmobile/sleep.S | 70 +++++++++++++++++++++++++++++++++++-- 1 file changed, 68 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/sh/kernel/cpu/shmobile/sleep.S b/arch/sh/kernel/cpu/shmobile/sleep.S index 5d888ef..baf2d7d 100644 --- a/arch/sh/kernel/cpu/shmobile/sleep.S +++ b/arch/sh/kernel/cpu/shmobile/sleep.S @@ -26,8 +26,30 @@ ENTRY(sh_mobile_standby) tst #SUSP_SH_SF, r0 bt skip_set_sf +#ifdef CONFIG_CPU_SUBTYPE_SH7724 + /* DBSC: put memory in self-refresh mode */ - /* SDRAM: disable power down and put in self-refresh mode */ + mov.l dben_reg, r4 + mov.l dben_data0, r1 + mov.l r1, @r4 + + mov.l dbrfpdn0_reg, r4 + mov.l dbrfpdn0_data0, r1 + mov.l r1, @r4 + + mov.l dbcmdcnt_reg, r4 + mov.l dbcmdcnt_data0, r1 + mov.l r1, @r4 + + mov.l dbcmdcnt_reg, r4 + mov.l dbcmdcnt_data1, r1 + mov.l r1, @r4 + + mov.l dbrfpdn0_reg, r4 + mov.l dbrfpdn0_data1, r1 + mov.l r1, @r4 +#else + /* SBSC: disable power down and put in self-refresh mode */ mov.l 1f, r4 mov.l 2f, r1 mov.l @r4, r2 @@ -35,6 +57,7 @@ ENTRY(sh_mobile_standby) mov.l 3f, r3 and r3, r2 mov.l r2, @r4 +#endif skip_set_sf: tst #SUSP_SH_SLEEP, r0 @@ -84,7 +107,36 @@ done_sleep: tst #SUSP_SH_SF, r0 bt skip_restore_sf - /* SDRAM: set auto-refresh mode */ +#ifdef CONFIG_CPU_SUBTYPE_SH7724 + /* DBSC: put memory in auto-refresh mode */ + + mov.l dbrfpdn0_reg, r4 + mov.l dbrfpdn0_data0, r1 + mov.l r1, @r4 + + /* sleep 140 ns */ + nop + nop + nop + nop + + mov.l dbcmdcnt_reg, r4 + mov.l dbcmdcnt_data0, r1 + mov.l r1, @r4 + + mov.l dbcmdcnt_reg, r4 + mov.l dbcmdcnt_data1, r1 + mov.l r1, @r4 + + mov.l dben_reg, r4 + mov.l dben_data1, r1 + mov.l r1, @r4 + + mov.l dbrfpdn0_reg, r4 + mov.l dbrfpdn0_data2, r1 + mov.l r1, @r4 +#else + /* SBSC: set auto-refresh mode */ mov.l 1f, r4 mov.l @r4, r2 mov.l 4f, r3 @@ -98,15 +150,29 @@ done_sleep: add r4, r3 or r2, r3 mov.l r3, @r1 +#endif skip_restore_sf: rts nop .balign 4 +#ifdef CONFIG_CPU_SUBTYPE_SH7724 +dben_reg: .long 0xfd000010 /* DBEN */ +dben_data0: .long 0 +dben_data1: .long 1 +dbrfpdn0_reg: .long 0xfd000040 /* DBRFPDN0 */ +dbrfpdn0_data0: .long 0 +dbrfpdn0_data1: .long 1 +dbrfpdn0_data2: .long 0x00010000 +dbcmdcnt_reg: .long 0xfd000014 /* DBCMDCNT */ +dbcmdcnt_data0: .long 2 +dbcmdcnt_data1: .long 4 +#else 1: .long 0xfe400008 /* SDCR0 */ 2: .long 0x00000400 3: .long 0xffff7fff 4: .long 0xfffffbff +#endif 5: .long 0xa4150020 /* STBCR */ 6: .long 0xfe40001c /* RTCOR */ 7: .long 0xfe400018 /* RTCNT */ -- cgit v1.1 From 3ef12c3c97603bad405d30c989718cc9405e2759 Mon Sep 17 00:00:00 2001 From: Cliff Wickman <cpw@sgi.com> Date: Fri, 14 Aug 2009 13:56:37 -0500 Subject: x86: Fix UV BAU destination subnode id The SGI UV Broadcast Assist Unit is used to send TLB shootdown messages to remote nodes of the system. The header of the message must contain the subnode id of the block in the receiving hub that handles such messages. It should always be 0x10, the id of the "LB" block. It had previously been documented as a "must be zero" field. Signed-off-by: Cliff Wickman <cpw@sgi.com> Acked-by: Jack Steiner <steiner@sgi.com> LKML-Reference: <E1Mc1x7-0005Ce-6t@eag09.americas.sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/include/asm/uv/uv_bau.h | 2 +- arch/x86/kernel/tlb_uv.c | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/include/asm/uv/uv_bau.h b/arch/x86/include/asm/uv/uv_bau.h index bddd44f..80e2984 100644 --- a/arch/x86/include/asm/uv/uv_bau.h +++ b/arch/x86/include/asm/uv/uv_bau.h @@ -133,7 +133,7 @@ struct bau_msg_payload { * see table 4.2.3.0.1 in broacast_assist spec. */ struct bau_msg_header { - unsigned int dest_subnodeid:6; /* must be zero */ + unsigned int dest_subnodeid:6; /* must be 0x10, for the LB */ /* bits 5:0 */ unsigned int base_dest_nodeid:15; /* nasid>>1 (pnode) of */ /* bits 20:6 */ /* first bit in node_map */ diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c index 8ccabb8..77b9689 100644 --- a/arch/x86/kernel/tlb_uv.c +++ b/arch/x86/kernel/tlb_uv.c @@ -744,6 +744,7 @@ uv_activation_descriptor_init(int node, int pnode) * note that base_dest_nodeid is actually a nasid. */ ad2->header.base_dest_nodeid = uv_partition_base_pnode << 1; + ad2->header.dest_subnodeid = 0x10; /* the LB */ ad2->header.command = UV_NET_ENDPOINT_INTD; ad2->header.int_both = 1; /* -- cgit v1.1 From dde5828f56cb2c1aa70365c476e6830482127258 Mon Sep 17 00:00:00 2001 From: Russell King <rmk@dyn-67.arm.linux.org.uk> Date: Sat, 15 Aug 2009 12:36:00 +0100 Subject: ARM: Fix broken highmem support Currently, highmem is selectable, and you can request an increased vmalloc area. However, none of this has any effect on the memory layout since a patch in the highmem series was accidentally dropped. Moreover, even if you did want highmem, all memory would still be registered as lowmem, possibly resulting in overflow of the available virtual mapping space. The highmem boundary is determined by the highest allowed beginning of the vmalloc area, which depends on its configurable minimum size (see commit 60296c71f6c5063e3c1f1d2619ca0b60940162e7 for details on this). We should create mappings and initialize bootmem only for low memory, while the zone allocator must still be told about highmem. Currently, memory nodes which are completely located in high memory are not supported. This is not a huge limitation since systems relying on highmem support are unlikely to have discontiguous memory with large holes. [ A similar patch was meant to be merged before commit 5f0fbf9ecaf3 and be available in Linux v2.6.30, however some git rebase screw-up of mine dropped the first commit of the series, and that goofage escaped testing somehow as well. -- Nico ] Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Reviewed-by: Nicolas Pitre <nico@marvell.com> --- arch/arm/include/asm/setup.h | 3 +- arch/arm/mm/init.c | 118 ++++++++++++++++++++++++++----------------- arch/arm/mm/mmu.c | 9 +++- 3 files changed, 83 insertions(+), 47 deletions(-) (limited to 'arch') diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h index ee1304f..5ccce0a 100644 --- a/arch/arm/include/asm/setup.h +++ b/arch/arm/include/asm/setup.h @@ -201,7 +201,8 @@ static struct tagtable __tagtable_##fn __tag = { tag, fn } struct membank { unsigned long start; unsigned long size; - int node; + unsigned short node; + unsigned short highmem; }; struct meminfo { diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 8277802..3a7279c 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -120,6 +120,32 @@ void show_mem(void) printk("%d pages swap cached\n", cached); } +static void __init find_node_limits(int node, struct meminfo *mi, + unsigned long *min, unsigned long *max_low, unsigned long *max_high) +{ + int i; + + *min = -1UL; + *max_low = *max_high = 0; + + for_each_nodebank(i, mi, node) { + struct membank *bank = &mi->bank[i]; + unsigned long start, end; + + start = bank_pfn_start(bank); + end = bank_pfn_end(bank); + + if (*min > start) + *min = start; + if (*max_high < end) + *max_high = end; + if (bank->highmem) + continue; + if (*max_low < end) + *max_low = end; + } +} + /* * FIXME: We really want to avoid allocating the bootmap bitmap * over the top of the initrd. Hopefully, this is located towards @@ -210,41 +236,25 @@ static inline void map_memory_bank(struct membank *bank) #endif } -static unsigned long __init bootmem_init_node(int node, struct meminfo *mi) +static void __init bootmem_init_node(int node, struct meminfo *mi, + unsigned long start_pfn, unsigned long end_pfn) { - unsigned long start_pfn, end_pfn, boot_pfn; + unsigned long boot_pfn; unsigned int boot_pages; pg_data_t *pgdat; int i; - start_pfn = -1UL; - end_pfn = 0; - /* - * Calculate the pfn range, and map the memory banks for this node. + * Map the memory banks for this node. */ for_each_nodebank(i, mi, node) { struct membank *bank = &mi->bank[i]; - unsigned long start, end; - start = bank_pfn_start(bank); - end = bank_pfn_end(bank); - - if (start_pfn > start) - start_pfn = start; - if (end_pfn < end) - end_pfn = end; - - map_memory_bank(bank); + if (!bank->highmem) + map_memory_bank(bank); } /* - * If there is no memory in this node, ignore it. - */ - if (end_pfn == 0) - return end_pfn; - - /* * Allocate the bootmem bitmap page. */ boot_pages = bootmem_bootmap_pages(end_pfn - start_pfn); @@ -260,7 +270,8 @@ static unsigned long __init bootmem_init_node(int node, struct meminfo *mi) for_each_nodebank(i, mi, node) { struct membank *bank = &mi->bank[i]; - free_bootmem_node(pgdat, bank_phys_start(bank), bank_phys_size(bank)); + if (!bank->highmem) + free_bootmem_node(pgdat, bank_phys_start(bank), bank_phys_size(bank)); memory_present(node, bank_pfn_start(bank), bank_pfn_end(bank)); } @@ -269,8 +280,6 @@ static unsigned long __init bootmem_init_node(int node, struct meminfo *mi) */ reserve_bootmem_node(pgdat, boot_pfn << PAGE_SHIFT, boot_pages << PAGE_SHIFT, BOOTMEM_DEFAULT); - - return end_pfn; } static void __init bootmem_reserve_initrd(int node) @@ -297,33 +306,39 @@ static void __init bootmem_reserve_initrd(int node) static void __init bootmem_free_node(int node, struct meminfo *mi) { unsigned long zone_size[MAX_NR_ZONES], zhole_size[MAX_NR_ZONES]; - unsigned long start_pfn, end_pfn; - pg_data_t *pgdat = NODE_DATA(node); + unsigned long min, max_low, max_high; int i; - start_pfn = pgdat->bdata->node_min_pfn; - end_pfn = pgdat->bdata->node_low_pfn; + find_node_limits(node, mi, &min, &max_low, &max_high); /* * initialise the zones within this node. */ memset(zone_size, 0, sizeof(zone_size)); - memset(zhole_size, 0, sizeof(zhole_size)); /* * The size of this node has already been determined. If we need * to do anything fancy with the allocation of this memory to the * zones, now is the time to do it. */ - zone_size[0] = end_pfn - start_pfn; + zone_size[0] = max_low - min; +#ifdef CONFIG_HIGHMEM + zone_size[ZONE_HIGHMEM] = max_high - max_low; +#endif /* * For each bank in this node, calculate the size of the holes. * holes = node_size - sum(bank_sizes_in_node) */ - zhole_size[0] = zone_size[0]; - for_each_nodebank(i, mi, node) - zhole_size[0] -= bank_pfn_size(&mi->bank[i]); + memcpy(zhole_size, zone_size, sizeof(zhole_size)); + for_each_nodebank(i, mi, node) { + int idx = 0; +#ifdef CONFIG_HIGHMEM + if (mi->bank[i].highmem) + idx = ZONE_HIGHMEM; +#endif + zhole_size[idx] -= bank_pfn_size(&mi->bank[i]); + } /* * Adjust the sizes according to any special requirements for @@ -331,13 +346,13 @@ static void __init bootmem_free_node(int node, struct meminfo *mi) */ arch_adjust_zones(node, zone_size, zhole_size); - free_area_init_node(node, zone_size, start_pfn, zhole_size); + free_area_init_node(node, zone_size, min, zhole_size); } void __init bootmem_init(void) { struct meminfo *mi = &meminfo; - unsigned long memend_pfn = 0; + unsigned long min, max_low, max_high; int node, initrd_node; /* @@ -345,11 +360,29 @@ void __init bootmem_init(void) */ initrd_node = check_initrd(mi); + max_low = max_high = 0; + /* * Run through each node initialising the bootmem allocator. */ for_each_node(node) { - unsigned long end_pfn = bootmem_init_node(node, mi); + unsigned long node_low, node_high; + + find_node_limits(node, mi, &min, &node_low, &node_high); + + if (node_low > max_low) + max_low = node_low; + if (node_high > max_high) + max_high = node_high; + + /* + * If there is no memory in this node, ignore it. + * (We can't have nodes which have no lowmem) + */ + if (node_low == 0) + continue; + + bootmem_init_node(node, mi, min, node_low); /* * Reserve any special node zero regions. @@ -362,12 +395,6 @@ void __init bootmem_init(void) */ if (node == initrd_node) bootmem_reserve_initrd(node); - - /* - * Remember the highest memory PFN. - */ - if (end_pfn > memend_pfn) - memend_pfn = end_pfn; } /* @@ -383,7 +410,7 @@ void __init bootmem_init(void) for_each_node(node) bootmem_free_node(node, mi); - high_memory = __va((memend_pfn << PAGE_SHIFT) - 1) + 1; + high_memory = __va((max_low << PAGE_SHIFT) - 1) + 1; /* * This doesn't seem to be used by the Linux memory manager any @@ -393,7 +420,8 @@ void __init bootmem_init(void) * Note: max_low_pfn and max_pfn reflect the number of _pages_ in * the system, not the maximum PFN. */ - max_pfn = max_low_pfn = memend_pfn - PHYS_PFN_OFFSET; + max_low_pfn = max_low - PHYS_PFN_OFFSET; + max_pfn = max_high - PHYS_PFN_OFFSET; } static inline int free_area(unsigned long pfn, unsigned long end, char *s) diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 4722582..4426ee6 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -687,13 +687,19 @@ __early_param("vmalloc=", early_vmalloc); static void __init sanity_check_meminfo(void) { - int i, j; + int i, j, highmem = 0; for (i = 0, j = 0; i < meminfo.nr_banks; i++) { struct membank *bank = &meminfo.bank[j]; *bank = meminfo.bank[i]; #ifdef CONFIG_HIGHMEM + if (__va(bank->start) > VMALLOC_MIN || + __va(bank->start) < (void *)PAGE_OFFSET) + highmem = 1; + + bank->highmem = highmem; + /* * Split those memory banks which are partially overlapping * the vmalloc area greatly simplifying things later. @@ -714,6 +720,7 @@ static void __init sanity_check_meminfo(void) i++; bank[1].size -= VMALLOC_MIN - __va(bank->start); bank[1].start = __pa(VMALLOC_MIN - 1) + 1; + bank[1].highmem = highmem = 1; j++; } bank->size = VMALLOC_MIN - __va(bank->start); -- cgit v1.1 From a2bb9f4d6a5a589b481595207ac3588cc08d1b60 Mon Sep 17 00:00:00 2001 From: Linus Walleij <linus.walleij@stericsson.com> Date: Thu, 13 Aug 2009 21:57:22 +0100 Subject: ARM: 5673/1: U300 fix initsection compile warning The u300_init_check_chip() function was not properly tagged with the __init macro and provided a initsection mismatch on compilation. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> --- arch/arm/mach-u300/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c index 7936085..2e9b8cc 100644 --- a/arch/arm/mach-u300/core.c +++ b/arch/arm/mach-u300/core.c @@ -510,7 +510,7 @@ static struct db_chip db_chips[] __initdata = { } }; -static void u300_init_check_chip(void) +static void __init u300_init_check_chip(void) { u16 val; -- cgit v1.1 From 4e5c25d405e18a2f279ca2bfc855508ec3a0186b Mon Sep 17 00:00:00 2001 From: Hugh Dickins <hugh.dickins@tiscali.co.uk> Date: Sun, 16 Aug 2009 15:54:37 +0100 Subject: x86, mce: therm_throt: Don't log redundant normality 0d01f31439c1e4d602bf9fdc924ab66f407f5e38 "x86, mce: therm_throt - change when we print messages" removed redundant announcements of "Temperature/speed normal". They're not worth logging and remove their accompanying "Machine check events logged" messages as well from the console. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Dmitry Torokhov <dtor@mail.ru> LKML-Reference: <Pine.LNX.4.64.0908161544100.7929@sister.anvils> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/kernel/cpu/mcheck/therm_throt.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c index 8bc64cf..5957a93 100644 --- a/arch/x86/kernel/cpu/mcheck/therm_throt.c +++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c @@ -116,11 +116,14 @@ static int therm_throt_process(int curr) cpu, __get_cpu_var(thermal_throttle_count)); add_taint(TAINT_MACHINE_CHECK); - } else if (was_throttled) { + return 1; + } + if (was_throttled) { printk(KERN_INFO "CPU%d: Temperature/speed normal\n", cpu); + return 1; } - return 1; + return 0; } #ifdef CONFIG_SYSFS -- cgit v1.1 From 52459ab91363343af8ae252766e9da762344a2e7 Mon Sep 17 00:00:00 2001 From: Leonardo Potenza <lpotenza@inwind.it> Date: Sun, 16 Aug 2009 18:55:48 +0200 Subject: x86: Annotate section mismatch warnings in kernel/apic/x2apic_uv_x.c The function uv_acpi_madt_oem_check() has been marked __init, the struct apic_x2apic_uv_x has been marked __refdata. The aim is to address the following section mismatch messages: WARNING: arch/x86/kernel/apic/built-in.o(.data+0x1368): Section mismatch in reference from the variable apic_x2apic_uv_x to the function .cpuinit.text:uv_wakeup_secondary() The variable apic_x2apic_uv_x references the function __cpuinit uv_wakeup_secondary() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, WARNING: arch/x86/kernel/built-in.o(.data+0x68e8): Section mismatch in reference from the variable apic_x2apic_uv_x to the function .cpuinit.text:uv_wakeup_secondary() The variable apic_x2apic_uv_x references the function __cpuinit uv_wakeup_secondary() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, WARNING: arch/x86/built-in.o(.text+0x7b36f): Section mismatch in reference from the function uv_acpi_madt_oem_check() to the function .init.text:early_ioremap() The function uv_acpi_madt_oem_check() references the function __init early_ioremap(). This is often because uv_acpi_madt_oem_check lacks a __init annotation or the annotation of early_ioremap is wrong. WARNING: arch/x86/built-in.o(.text+0x7b38d): Section mismatch in reference from the function uv_acpi_madt_oem_check() to the function .init.text:early_iounmap() The function uv_acpi_madt_oem_check() references the function __init early_iounmap(). This is often because uv_acpi_madt_oem_check lacks a __init annotation or the annotation of early_iounmap is wrong. WARNING: arch/x86/built-in.o(.data+0x8668): Section mismatch in reference from the variable apic_x2apic_uv_x to the function .cpuinit.text:uv_wakeup_secondary() The variable apic_x2apic_uv_x references the function __cpuinit uv_wakeup_secondary() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, Signed-off-by: Leonardo Potenza <lpotenza@inwind.it> LKML-Reference: <200908161855.48302.lpotenza@inwind.it> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/kernel/apic/x2apic_uv_x.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c index 832e908..6011593 100644 --- a/arch/x86/kernel/apic/x2apic_uv_x.c +++ b/arch/x86/kernel/apic/x2apic_uv_x.c @@ -46,7 +46,7 @@ static int early_get_nodeid(void) return node_id.s.node_id; } -static int uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id) +static int __init uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id) { if (!strcmp(oem_id, "SGI")) { if (!strcmp(oem_table_id, "UVL")) @@ -253,7 +253,7 @@ static void uv_send_IPI_self(int vector) apic_write(APIC_SELF_IPI, vector); } -struct apic apic_x2apic_uv_x = { +struct apic __refdata apic_x2apic_uv_x = { .name = "UV large system", .probe = NULL, -- cgit v1.1 From c7f6fa44115d401e89db730f357629d39f8e4ba6 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Date: Tue, 28 Jul 2009 23:52:54 +0200 Subject: x86, mce: don't log boot MCEs on Pentium M (model == 13) CPUs On my legacy Pentium M laptop (Acer Extensa 2900) I get bogus MCE on a cold boot with CONFIG_X86_NEW_MCE enabled, i.e. (after decoding it with mcelog): MCE 0 HARDWARE ERROR. This is *NOT* a software problem! Please contact your hardware vendor CPU 0 BANK 1 MCG status: MCi status: Error overflow Uncorrected error Error enabled Processor context corrupt MCA: Data CACHE Level-1 UNKNOWN Error STATUS f200000000000195 MCGSTATUS 0 [ The other STATUS values observed: f2000000000001b5 (... UNKNOWN error) and f200000000000115 (... READ Error). To verify that this is not a CONFIG_X86_NEW_MCE bug I also modified the CONFIG_X86_OLD_MCE code (which doesn't log any MCEs) to dump content of STATUS MSR before it is cleared during initialization. ] Since the bogus MCE results in a kernel taint (which in turn disables lockdep support) don't log boot MCEs on Pentium M (model == 13) CPUs by default ("mce=bootlog" boot parameter can be be used to get the old behavior). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Reviewed-by: Andi Kleen <andi@firstfloor.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/kernel/cpu/mcheck/mce.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index 1cfb623..a0c2910 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -1273,6 +1273,10 @@ static void mce_cpu_quirks(struct cpuinfo_x86 *c) if ((c->x86 > 6 || (c->x86 == 6 && c->x86_model >= 0xe)) && monarch_timeout < 0) monarch_timeout = USEC_PER_SEC; + + /* There are also broken BIOSes on some Pentium M systems. */ + if (c->x86 == 6 && c->x86_model == 13 && mce_bootlog < 0) + mce_bootlog = 0; } if (monarch_timeout < 0) monarch_timeout = 0; -- cgit v1.1 From e412cd257e0d51e0ecbb89f50953835b5a0681b2 Mon Sep 17 00:00:00 2001 From: Ingo Molnar <mingo@elte.hu> Date: Mon, 17 Aug 2009 10:19:00 +0200 Subject: x86, mce: Don't initialize MCEs on unknown CPUs An older test-box started hanging at the following point during bootup: [ 0.022996] Mount-cache hash table entries: 512 [ 0.024996] Initializing cgroup subsys debug [ 0.025996] Initializing cgroup subsys cpuacct [ 0.026995] Initializing cgroup subsys devices [ 0.027995] Initializing cgroup subsys freezer [ 0.028995] mce: CPU supports 5 MCE banks I've bisected it down to commit 4efc0670 ("x86, mce: use 64bit machine check code on 32bit"), which utilizes the MCE code on 32-bit systems too. The problem is caused by this detail in my config: # CONFIG_CPU_SUP_INTEL is not set This disables the quirks in mce_cpu_quirks() but still enables MCE support - which then hangs due to the missing quirk workaround needed on this CPU: if (c->x86 == 6 && c->x86_model < 0x1A && banks > 0) mce_banks[0].init = 0; The safe solution is to not initialize MCEs if we dont know on what CPU we are running (or if that CPU's support code got disabled in the config). Also be a bit more defensive on 32-bit systems: dont do a boot-time dump of pending MCEs not just on the specific system that we found a problem with (Pentium-M), but earlier ones as well. Now this problem is probably not common and disabling CPU support is rare - but still being more defensive in something we turned on for a wide range of CPUs is prudent. Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> LKML-Reference: Message-ID: <4A88E3E4.40506@jp.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/kernel/cpu/mcheck/mce.c | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index a0c2910..0121304 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -1226,8 +1226,13 @@ static void mce_init(void) } /* Add per CPU specific workarounds here */ -static void mce_cpu_quirks(struct cpuinfo_x86 *c) +static int mce_cpu_quirks(struct cpuinfo_x86 *c) { + if (c->x86_vendor == X86_VENDOR_UNKNOWN) { + pr_info("MCE: unknown CPU type - not enabling MCE support.\n"); + return -EOPNOTSUPP; + } + /* This should be disabled by the BIOS, but isn't always */ if (c->x86_vendor == X86_VENDOR_AMD) { if (c->x86 == 15 && banks > 4) { @@ -1274,14 +1279,19 @@ static void mce_cpu_quirks(struct cpuinfo_x86 *c) monarch_timeout < 0) monarch_timeout = USEC_PER_SEC; - /* There are also broken BIOSes on some Pentium M systems. */ - if (c->x86 == 6 && c->x86_model == 13 && mce_bootlog < 0) + /* + * There are also broken BIOSes on some Pentium M and + * earlier systems: + */ + if (c->x86 == 6 && c->x86_model <= 13 && mce_bootlog < 0) mce_bootlog = 0; } if (monarch_timeout < 0) monarch_timeout = 0; if (mce_bootlog != 0) mce_panic_timeout = 30; + + return 0; } static void __cpuinit mce_ancient_init(struct cpuinfo_x86 *c) @@ -1342,11 +1352,10 @@ void __cpuinit mcheck_init(struct cpuinfo_x86 *c) if (!mce_available(c)) return; - if (mce_cap_init() < 0) { + if (mce_cap_init() < 0 || mce_cpu_quirks(c) < 0) { mce_disabled = 1; return; } - mce_cpu_quirks(c); machine_check_vector = do_machine_check; -- cgit v1.1 From 87c62a66edd645a9b1ff1f9b00ab20c5a93d8845 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Date: Tue, 14 Jul 2009 22:37:09 +0900 Subject: MIPS: Fix HPAGE_SIZE redefinition This patch fixes warnings like this: CC fs/proc/meminfo.o In file included from /work/linux/include/linux/mmzone.h:20, from /work/linux/include/linux/gfp.h:4, from /work/linux/include/linux/mm.h:8, from /work/linux/fs/proc/meminfo.c:5: /work/linux/arch/mips/include/asm/page.h:36:1: warning: "HPAGE_SIZE" redefined In file included from /work/linux/fs/proc/meminfo.c:2: /work/linux/include/linux/hugetlb.h:107:1: warning: this is the location of the previous definition Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Acked-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/include/asm/page.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h index 96a14a4..4320239 100644 --- a/arch/mips/include/asm/page.h +++ b/arch/mips/include/asm/page.h @@ -32,10 +32,12 @@ #define PAGE_SIZE (1UL << PAGE_SHIFT) #define PAGE_MASK (~((1 << PAGE_SHIFT) - 1)) +#ifdef CONFIG_HUGETLB_PAGE #define HPAGE_SHIFT (PAGE_SHIFT + PAGE_SHIFT - 3) #define HPAGE_SIZE ((1UL) << HPAGE_SHIFT) #define HPAGE_MASK (~(HPAGE_SIZE - 1)) #define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT) +#endif /* CONFIG_HUGETLB_PAGE */ #ifndef __ASSEMBLY__ -- cgit v1.1 From 1adcaafe7414c5731f758b158aa0525057225deb Mon Sep 17 00:00:00 2001 From: Suresh Siddha <suresh.b.siddha@intel.com> Date: Mon, 17 Aug 2009 13:23:50 -0700 Subject: x86, pat: Allow ISA memory range uncacheable mapping requests Max Vozeler reported: > Bug 13877 - bogl-term broken with CONFIG_X86_PAT=y, works with =n > > strace of bogl-term: > 814 mmap2(NULL, 65536, PROT_READ|PROT_WRITE, MAP_SHARED, 4, 0) > = -1 EAGAIN (Resource temporarily unavailable) > 814 write(2, "bogl: mmaping /dev/fb0: Resource temporarily unavailable\n", > 57) = 57 PAT code maps the ISA memory range as WB in the PAT attribute, so that fixed range MTRR registers define the actual memory type (UC/WC/WT etc). But the upper level is_new_memtype_allowed() API checks are failing, as the request here is for UC and the return tracked type is WB (Tracked type is WB as MTRR type for this legacy range potentially will be different for each 4k page). Fix is_new_memtype_allowed() by always succeeding the ISA address range checks, as the null PAT (WB) and def MTRR fixed range register settings satisfy the memory type needs of the applications that map the ISA address range. Reported-and-Tested-by: Max Vozeler <xam@debian.org> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> --- arch/x86/include/asm/pgtable.h | 12 ++++++++++-- arch/x86/mm/pat.c | 3 ++- 2 files changed, 12 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h index 3cc06e3..1674807 100644 --- a/arch/x86/include/asm/pgtable.h +++ b/arch/x86/include/asm/pgtable.h @@ -2,6 +2,7 @@ #define _ASM_X86_PGTABLE_H #include <asm/page.h> +#include <asm/e820.h> #include <asm/pgtable_types.h> @@ -269,10 +270,17 @@ static inline pgprot_t pgprot_modify(pgprot_t oldprot, pgprot_t newprot) #define canon_pgprot(p) __pgprot(massage_pgprot(p)) -static inline int is_new_memtype_allowed(unsigned long flags, - unsigned long new_flags) +static inline int is_new_memtype_allowed(u64 paddr, unsigned long size, + unsigned long flags, + unsigned long new_flags) { /* + * PAT type is always WB for ISA. So no need to check. + */ + if (is_ISA_range(paddr, paddr + size - 1)) + return 1; + + /* * Certain new memtypes are not allowed with certain * requested memtype: * - request is uncached, return cannot be write-back diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c index e6718bb..352aa9e 100644 --- a/arch/x86/mm/pat.c +++ b/arch/x86/mm/pat.c @@ -623,7 +623,8 @@ static int reserve_pfn_range(u64 paddr, unsigned long size, pgprot_t *vma_prot, return ret; if (flags != want_flags) { - if (strict_prot || !is_new_memtype_allowed(want_flags, flags)) { + if (strict_prot || + !is_new_memtype_allowed(paddr, size, want_flags, flags)) { free_memtype(paddr, paddr + size); printk(KERN_ERR "%s:%d map pfn expected mapping type %s" " for %Lx-%Lx, got %s\n", -- cgit v1.1 From 6b99ecec25c8fd501e74306f5d23dd0365065e2a Mon Sep 17 00:00:00 2001 From: Christoph Hellwig <hch@lst.de> Date: Thu, 6 Aug 2009 23:00:38 +0200 Subject: microblaze: use the generic ack_bad_irq implementation Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Michal Simek <monstr@monstr.eu> --- arch/microblaze/include/asm/hardirq.h | 2 -- arch/microblaze/kernel/irq.c | 9 --------- 2 files changed, 11 deletions(-) (limited to 'arch') diff --git a/arch/microblaze/include/asm/hardirq.h b/arch/microblaze/include/asm/hardirq.h index 41e1e1a..cd1ac9a 100644 --- a/arch/microblaze/include/asm/hardirq.h +++ b/arch/microblaze/include/asm/hardirq.h @@ -12,8 +12,6 @@ /* should be defined in each interrupt controller driver */ extern unsigned int get_irq(struct pt_regs *regs); -#define ack_bad_irq ack_bad_irq -void ack_bad_irq(unsigned int irq); #include <asm-generic/hardirq.h> #endif /* _ASM_MICROBLAZE_HARDIRQ_H */ diff --git a/arch/microblaze/kernel/irq.c b/arch/microblaze/kernel/irq.c index f688ee9..7d5ddd6 100644 --- a/arch/microblaze/kernel/irq.c +++ b/arch/microblaze/kernel/irq.c @@ -30,15 +30,6 @@ unsigned int irq_of_parse_and_map(struct device_node *dev, int index) } EXPORT_SYMBOL_GPL(irq_of_parse_and_map); -/* - * 'what should we do if we get a hw irq event on an illegal vector'. - * each architecture has to answer this themselves. - */ -void ack_bad_irq(unsigned int irq) -{ - printk(KERN_WARNING "unexpected IRQ trap at vector %02x\n", irq); -} - static u32 concurrent_irq; void do_IRQ(struct pt_regs *regs) -- cgit v1.1 From 892ee92b81b6e7fa5f6147c96e11c6c1b9802fc6 Mon Sep 17 00:00:00 2001 From: John Williams <john.williams@petalogix.com> Date: Wed, 29 Jul 2009 22:08:40 +1000 Subject: microblaze: Sane handling of missing timer/intc in device tree This code path doesn't test any returned pointers for NULL, leading to a bad kernel page fault if there's no timer/intc found. Slightly better is to BUG(), but even better still would be a printk beforehand. Signed-off-by: John Williams <john.williams@petalogix.com> Signed-off-by: Michal Simek <monstr@monstr.eu> --- arch/microblaze/kernel/intc.c | 2 ++ arch/microblaze/kernel/timer.c | 2 ++ 2 files changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/microblaze/kernel/intc.c b/arch/microblaze/kernel/intc.c index b156052..6eea6f9 100644 --- a/arch/microblaze/kernel/intc.c +++ b/arch/microblaze/kernel/intc.c @@ -12,6 +12,7 @@ #include <linux/irq.h> #include <asm/page.h> #include <linux/io.h> +#include <linux/bug.h> #include <asm/prom.h> #include <asm/irq.h> @@ -130,6 +131,7 @@ void __init init_IRQ(void) if (intc) break; } + BUG_ON(!intc); intc_baseaddr = *(int *) of_get_property(intc, "reg", NULL); intc_baseaddr = (unsigned long) ioremap(intc_baseaddr, PAGE_SIZE); diff --git a/arch/microblaze/kernel/timer.c b/arch/microblaze/kernel/timer.c index bdfa2f9..5499dea 100644 --- a/arch/microblaze/kernel/timer.c +++ b/arch/microblaze/kernel/timer.c @@ -22,6 +22,7 @@ #include <linux/clocksource.h> #include <linux/clockchips.h> #include <linux/io.h> +#include <linux/bug.h> #include <asm/cpuinfo.h> #include <asm/setup.h> #include <asm/prom.h> @@ -234,6 +235,7 @@ void __init time_init(void) if (timer) break; } + BUG_ON(!timer); timer_baseaddr = *(int *) of_get_property(timer, "reg", NULL); timer_baseaddr = (unsigned long) ioremap(timer_baseaddr, PAGE_SIZE); -- cgit v1.1 From 2856ed35ead295a7cc8788d9ba860e746dfc92bb Mon Sep 17 00:00:00 2001 From: Michal Simek <monstr@monstr.eu> Date: Thu, 6 Aug 2009 16:00:52 +0200 Subject: microblaze: Enable ppoll syscall Signed-off-by: Michal Simek <monstr@monstr.eu> --- arch/microblaze/kernel/syscall_table.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S index 216db81..4572160 100644 --- a/arch/microblaze/kernel/syscall_table.S +++ b/arch/microblaze/kernel/syscall_table.S @@ -313,7 +313,7 @@ ENTRY(sys_call_table) .long sys_fchmodat .long sys_faccessat .long sys_ni_syscall /* pselect6 */ - .long sys_ni_syscall /* sys_ppoll */ + .long sys_ppoll .long sys_unshare /* 310 */ .long sys_set_robust_list .long sys_get_robust_list -- cgit v1.1 From 8f37b6c9852ff79cc8472c44ea6f6485dfd58bd2 Mon Sep 17 00:00:00 2001 From: Michal Simek <monstr@monstr.eu> Date: Tue, 11 Aug 2009 12:36:12 +0200 Subject: microblaze: Use klimit instead of _end for memory init For noMMU system when you use larger rootfs image there is problem with using _end label because we increase klimit but in memory initialization we use still _end which is wrong. Larger mtd rootfs was rewritten by init_bootmem_node. MMU kernel use static initialization where klimit is setup to _end. There is no any other hanling with klimit. Signed-off-by: Michal Simek <monstr@monstr.eu> --- arch/microblaze/mm/init.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/microblaze/mm/init.c b/arch/microblaze/mm/init.c index 8d92c4e..f207f1a 100644 --- a/arch/microblaze/mm/init.c +++ b/arch/microblaze/mm/init.c @@ -130,13 +130,13 @@ void __init setup_memory(void) * (in case the address isn't page-aligned). */ #ifndef CONFIG_MMU - map_size = init_bootmem_node(NODE_DATA(0), PFN_UP(TOPHYS((u32)_end)), + map_size = init_bootmem_node(NODE_DATA(0), PFN_UP(TOPHYS((u32)klimit)), min_low_pfn, max_low_pfn); #else map_size = init_bootmem_node(&contig_page_data, - PFN_UP(TOPHYS((u32)_end)), min_low_pfn, max_low_pfn); + PFN_UP(TOPHYS((u32)klimit)), min_low_pfn, max_low_pfn); #endif - lmb_reserve(PFN_UP(TOPHYS((u32)_end)) << PAGE_SHIFT, map_size); + lmb_reserve(PFN_UP(TOPHYS((u32)klimit)) << PAGE_SHIFT, map_size); /* free bootmem is whole main memory */ free_bootmem(memory_start, memory_size); -- cgit v1.1 From 1fef7891755d99039592aa8d1ed02e981f38de15 Mon Sep 17 00:00:00 2001 From: Michal Simek <monstr@monstr.eu> Date: Tue, 18 Aug 2009 11:05:11 +0200 Subject: microblaze: Update Microblaze defconfigs Signed-off-by: Michal Simek <monstr@monstr.eu> --- arch/microblaze/configs/mmu_defconfig | 70 +++++++++++++------------ arch/microblaze/configs/nommu_defconfig | 91 ++++++++++++++++++++------------- 2 files changed, 91 insertions(+), 70 deletions(-) (limited to 'arch') diff --git a/arch/microblaze/configs/mmu_defconfig b/arch/microblaze/configs/mmu_defconfig index bd0b85e..09c3296 100644 --- a/arch/microblaze/configs/mmu_defconfig +++ b/arch/microblaze/configs/mmu_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc6 -# Fri May 22 10:02:33 2009 +# Linux kernel version: 2.6.31-rc6 +# Tue Aug 18 11:00:02 2009 # CONFIG_MICROBLAZE=y # CONFIG_SWAP is not set @@ -18,7 +18,11 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_CSUM=y +# CONFIG_PCI is not set +CONFIG_NO_DMA=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -59,8 +63,8 @@ CONFIG_INITRAMFS_ROOT_GID=0 CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set -CONFIG_INITRAMFS_COMPRESSION_NONE=y -# CONFIG_INITRAMFS_COMPRESSION_GZIP is not set +# CONFIG_INITRAMFS_COMPRESSION_NONE is not set +CONFIG_INITRAMFS_COMPRESSION_GZIP=y # CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set # CONFIG_INITRAMFS_COMPRESSION_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -71,7 +75,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y -# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y @@ -84,13 +87,22 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y # CONFIG_SHMEM is not set CONFIG_AIO=y + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -102,7 +114,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -194,9 +206,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # # Exectuable file formats @@ -262,6 +274,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -325,7 +338,6 @@ CONFIG_MISC_DEVICES=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -344,7 +356,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set -# CONFIG_B44 is not set +# CONFIG_KS8842 is not set CONFIG_NETDEV_1000=y CONFIG_NETDEV_10000=y @@ -410,6 +422,11 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -418,12 +435,6 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set -CONFIG_SSB_POSSIBLE=y - -# -# Sonics Silicon Backplane -# -# CONFIG_SSB is not set # # Multifunction device drivers @@ -433,22 +444,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -469,9 +465,12 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set -# CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -485,12 +484,15 @@ CONFIG_EXT2_FS=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set @@ -678,6 +680,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_SYSCTL_SYSCALL_CHECK is not set # CONFIG_PAGE_POISONING is not set # CONFIG_SAMPLES is not set +# CONFIG_KMEMCHECK is not set CONFIG_EARLY_PRINTK=y CONFIG_HEART_BEAT=y CONFIG_DEBUG_BOOTMEM=y @@ -793,6 +796,5 @@ CONFIG_ZLIB_INFLATE=y CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y diff --git a/arch/microblaze/configs/nommu_defconfig b/arch/microblaze/configs/nommu_defconfig index 4ef6af0..8b63861 100644 --- a/arch/microblaze/configs/nommu_defconfig +++ b/arch/microblaze/configs/nommu_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc5 -# Mon May 11 09:01:02 2009 +# Linux kernel version: 2.6.31-rc6 +# Tue Aug 18 10:35:30 2009 # CONFIG_MICROBLAZE=y # CONFIG_SWAP is not set @@ -17,9 +17,12 @@ CONFIG_GENERIC_TIME=y # CONFIG_GENERIC_TIME_VSYSCALL is not set CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_CSUM=y # CONFIG_PCI is not set -# CONFIG_NO_DMA is not set +CONFIG_NO_DMA=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -64,7 +67,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y -# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y @@ -76,13 +78,23 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_AIO=y + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -95,7 +107,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -156,8 +168,16 @@ CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttyUL0,115200" # CONFIG_CMDLINE_FORCE is not set CONFIG_OF=y -CONFIG_OF_DEVICE=y CONFIG_PROC_DEVICETREE=y + +# +# Advanced setup +# + +# +# Default settings for advanced configuration options are used +# +CONFIG_KERNEL_START=0x90000000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -169,7 +189,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_NOMMU_INITIAL_TRIM_EXCESS=1 # @@ -237,6 +257,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -254,7 +275,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -353,6 +378,7 @@ CONFIG_MTD_UCLINUX=y # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set +CONFIG_OF_DEVICE=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set @@ -364,6 +390,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_XILINX_SYSACE is not set CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set @@ -383,7 +410,6 @@ CONFIG_MISC_DEVICES=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -402,7 +428,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set -# CONFIG_B44 is not set +# CONFIG_KS8842 is not set CONFIG_NETDEV_1000=y CONFIG_NETDEV_10000=y @@ -463,23 +489,25 @@ CONFIG_HW_RANDOM=y # CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_RTC is not set # CONFIG_GEN_RTC is not set +# CONFIG_XILINX_HWICAP is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set -CONFIG_SSB_POSSIBLE=y - -# -# Sonics Silicon Backplane -# -# CONFIG_SSB is not set # # Multifunction device drivers @@ -489,22 +517,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -520,9 +533,10 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_DISPLAY_SUPPORT is not set # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y -# CONFIG_USB_ARCH_HAS_HCD is not set +CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set @@ -543,9 +557,12 @@ CONFIG_USB_SUPPORT=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set -# CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -558,12 +575,15 @@ CONFIG_EXT2_FS=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set @@ -813,6 +833,5 @@ CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_ZLIB_INFLATE=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y -- cgit v1.1 From 78b89ecd731798f2fec8cc26ca90739253cec33c Mon Sep 17 00:00:00 2001 From: Jan Beulich <JBeulich@novell.com> Date: Tue, 18 Aug 2009 16:41:33 +0100 Subject: i386: Fix section mismatches for init code with !HOTPLUG_CPU Commit 0e83815be719d3391bf5ea24b7fe696c07dbd417 changed the section the initial_code variable gets allocated in, in an attempt to address a section conflict warning. This, however created a new section conflict when building without HOTPLUG_CPU. The apparently only (reasonable) way to address this is to always use __REFDATA. Once at it, also fix a second section mismatch when not using HOTPLUG_CPU. Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: Robert Richter <robert.richter@amd.com> LKML-Reference: <4A8AE7CD020000780001054B@vpn.id2.novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/kernel/head_32.S | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S index 0d98a01..cc827ac 100644 --- a/arch/x86/kernel/head_32.S +++ b/arch/x86/kernel/head_32.S @@ -261,9 +261,7 @@ page_pde_offset = (__PAGE_OFFSET >> 20); * which will be freed later */ -#ifndef CONFIG_HOTPLUG_CPU -.section .init.text,"ax",@progbits -#endif +__CPUINIT #ifdef CONFIG_SMP ENTRY(startup_32_smp) @@ -602,11 +600,7 @@ ignore_int: #endif iret -#ifndef CONFIG_HOTPLUG_CPU - __CPUINITDATA -#else __REFDATA -#endif .align 4 ENTRY(initial_code) .long i386_start_kernel -- cgit v1.1 From e2c6cbd9ace61039d3de39e717195e38f1492aee Mon Sep 17 00:00:00 2001 From: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Date: Tue, 18 Aug 2009 20:16:55 -0700 Subject: sparc: sys32.S incorrect compat-layer splice() system call I think arch/sparc/kernel/sys32.S has an incorrect splice definition: SIGN2(sys32_splice, sys_splice, %o0, %o1) The splice() prototype looks like : long splice(int fd_in, loff_t *off_in, int fd_out, loff_t *off_out, size_t len, unsigned int flags); So I think we should have : SIGN2(sys32_splice, sys_splice, %o0, %o2) Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: David S. Miller <davem@davemloft.net> --- arch/sparc/kernel/sys32.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sparc/kernel/sys32.S b/arch/sparc/kernel/sys32.S index 577f8fa..aed9486 100644 --- a/arch/sparc/kernel/sys32.S +++ b/arch/sparc/kernel/sys32.S @@ -134,7 +134,7 @@ SIGN1(sys32_getpeername, sys_getpeername, %o0) SIGN1(sys32_getsockname, sys_getsockname, %o0) SIGN2(sys32_ioprio_get, sys_ioprio_get, %o0, %o1) SIGN3(sys32_ioprio_set, sys_ioprio_set, %o0, %o1, %o2) -SIGN2(sys32_splice, sys_splice, %o0, %o1) +SIGN2(sys32_splice, sys_splice, %o0, %o2) SIGN2(sys32_sync_file_range, compat_sync_file_range, %o0, %o5) SIGN2(sys32_tee, sys_tee, %o0, %o1) SIGN1(sys32_vmsplice, compat_sys_vmsplice, %o0) -- cgit v1.1 From a9919646d12a13bea7eb74b996686f900dffb120 Mon Sep 17 00:00:00 2001 From: "David S. Miller" <davem@davemloft.net> Date: Tue, 18 Aug 2009 23:44:08 -0700 Subject: sparc32: Kill trap table freeing code. Normally, srmmu uses different trap table register values to allow determination of the cpu we're on. All of the trap tables have identical content, they just sit at different offsets from the first trap table, and the offset shifted down and masked out determines the cpu we are on. The code tries to free them up when they aren't actually used (don't have all 4 cpus, we're on sun4d, etc.) but that causes problems. For one thing it triggers false positives in the DMA debugging code. And fixing that up while preserving this relative offset thing isn't trivial. So just kill the freeing code, it costs us at most 3 pages, big deal... Signed-off-by: David S. Miller <davem@davemloft.net> --- arch/sparc/kernel/sun4d_smp.c | 22 ---------------------- arch/sparc/kernel/sun4m_smp.c | 26 -------------------------- 2 files changed, 48 deletions(-) (limited to 'arch') diff --git a/arch/sparc/kernel/sun4d_smp.c b/arch/sparc/kernel/sun4d_smp.c index 54fb024..68791ca 100644 --- a/arch/sparc/kernel/sun4d_smp.c +++ b/arch/sparc/kernel/sun4d_smp.c @@ -162,9 +162,6 @@ extern void cpu_panic(void); */ extern struct linux_prom_registers smp_penguin_ctable; -extern unsigned long trapbase_cpu1[]; -extern unsigned long trapbase_cpu2[]; -extern unsigned long trapbase_cpu3[]; void __init smp4d_boot_cpus(void) { @@ -235,25 +232,6 @@ void __init smp4d_smp_done(void) *prev = first; local_flush_cache_all(); - /* Free unneeded trap tables */ - ClearPageReserved(virt_to_page(trapbase_cpu1)); - init_page_count(virt_to_page(trapbase_cpu1)); - free_page((unsigned long)trapbase_cpu1); - totalram_pages++; - num_physpages++; - - ClearPageReserved(virt_to_page(trapbase_cpu2)); - init_page_count(virt_to_page(trapbase_cpu2)); - free_page((unsigned long)trapbase_cpu2); - totalram_pages++; - num_physpages++; - - ClearPageReserved(virt_to_page(trapbase_cpu3)); - init_page_count(virt_to_page(trapbase_cpu3)); - free_page((unsigned long)trapbase_cpu3); - totalram_pages++; - num_physpages++; - /* Ok, they are spinning and ready to go. */ smp_processors_ready = 1; sun4d_distribute_irqs(); diff --git a/arch/sparc/kernel/sun4m_smp.c b/arch/sparc/kernel/sun4m_smp.c index 960b113..762d6ee 100644 --- a/arch/sparc/kernel/sun4m_smp.c +++ b/arch/sparc/kernel/sun4m_smp.c @@ -121,9 +121,6 @@ void __cpuinit smp4m_callin(void) */ extern struct linux_prom_registers smp_penguin_ctable; -extern unsigned long trapbase_cpu1[]; -extern unsigned long trapbase_cpu2[]; -extern unsigned long trapbase_cpu3[]; void __init smp4m_boot_cpus(void) { @@ -193,29 +190,6 @@ void __init smp4m_smp_done(void) *prev = first; local_flush_cache_all(); - /* Free unneeded trap tables */ - if (!cpu_isset(1, cpu_present_map)) { - ClearPageReserved(virt_to_page(trapbase_cpu1)); - init_page_count(virt_to_page(trapbase_cpu1)); - free_page((unsigned long)trapbase_cpu1); - totalram_pages++; - num_physpages++; - } - if (!cpu_isset(2, cpu_present_map)) { - ClearPageReserved(virt_to_page(trapbase_cpu2)); - init_page_count(virt_to_page(trapbase_cpu2)); - free_page((unsigned long)trapbase_cpu2); - totalram_pages++; - num_physpages++; - } - if (!cpu_isset(3, cpu_present_map)) { - ClearPageReserved(virt_to_page(trapbase_cpu3)); - init_page_count(virt_to_page(trapbase_cpu3)); - free_page((unsigned long)trapbase_cpu3); - totalram_pages++; - num_physpages++; - } - /* Ok, they are spinning and ready to go. */ } -- cgit v1.1 From 2193aa276e2579d9c781c5269521d43f47da9959 Mon Sep 17 00:00:00 2001 From: "David S. Miller" <davem@davemloft.net> Date: Tue, 18 Aug 2009 23:46:12 -0700 Subject: sparc32: Update defconfig. Signed-off-by: David S. Miller <davem@davemloft.net> --- arch/sparc/configs/sparc32_defconfig | 74 +++++++++++++++++++++--------------- 1 file changed, 44 insertions(+), 30 deletions(-) (limited to 'arch') diff --git a/arch/sparc/configs/sparc32_defconfig b/arch/sparc/configs/sparc32_defconfig index 8bcd27a..a0f62a8 100644 --- a/arch/sparc/configs/sparc32_defconfig +++ b/arch/sparc/configs/sparc32_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc2 -# Fri Apr 17 04:04:46 2009 +# Linux kernel version: 2.6.31-rc1 +# Tue Aug 18 23:45:52 2009 # # CONFIG_64BIT is not set CONFIG_SPARC=y @@ -17,6 +17,7 @@ CONFIG_GENERIC_ISA_DMA=y CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_OF=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -74,7 +75,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -87,8 +87,13 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -97,6 +102,10 @@ CONFIG_SLAB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -109,7 +118,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -154,9 +163,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_SUN_PM=y # CONFIG_SPARC_LED is not set CONFIG_SERIAL_CONSOLE=y @@ -264,6 +273,7 @@ CONFIG_IPV6_TUNNEL=m # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -281,7 +291,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -335,6 +349,7 @@ CONFIG_MISC_DEVICES=y # EEPROM support # # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -358,10 +373,6 @@ CONFIG_BLK_DEV_SR=m # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=m # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -379,6 +390,7 @@ CONFIG_SCSI_SPI_ATTRS=y CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -387,6 +399,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set @@ -401,7 +414,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_QLOGIC_1280 is not set @@ -426,13 +438,16 @@ CONFIG_SCSI_SUNESP=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -463,6 +478,7 @@ CONFIG_SUNQE=m # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -482,6 +498,7 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -629,6 +646,11 @@ CONFIG_HW_RANDOM=m CONFIG_DEVPORT=y # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -668,22 +690,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -776,6 +783,10 @@ CONFIG_RTC_DRV_M48T59=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -799,10 +810,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -985,6 +998,7 @@ CONFIG_KGDB=y CONFIG_KGDB_SERIAL_CONSOLE=y CONFIG_KGDB_TESTS=y # CONFIG_KGDB_TESTS_ON_BOOT is not set +# CONFIG_KMEMCHECK is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_STACK_DEBUG is not set -- cgit v1.1 From 1ca3976d8ca8b0b44145994b1433f759a642615b Mon Sep 17 00:00:00 2001 From: "David S. Miller" <davem@davemloft.net> Date: Tue, 18 Aug 2009 23:56:21 -0700 Subject: sparc64: Update defconfig. Signed-off-by: David S. Miller <davem@davemloft.net> --- arch/sparc/configs/sparc64_defconfig | 59 +++++++++++++++++++++--------------- 1 file changed, 34 insertions(+), 25 deletions(-) (limited to 'arch') diff --git a/arch/sparc/configs/sparc64_defconfig b/arch/sparc/configs/sparc64_defconfig index 0123a4c..fdddf7a 100644 --- a/arch/sparc/configs/sparc64_defconfig +++ b/arch/sparc/configs/sparc64_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30 -# Tue Jun 16 04:59:36 2009 +# Linux kernel version: 2.6.31-rc1 +# Tue Aug 18 23:56:02 2009 # CONFIG_64BIT=y CONFIG_SPARC=y @@ -26,6 +26,7 @@ CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_OF=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -119,6 +120,11 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_USE_GENERIC_SMP_HELPERS=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -204,7 +210,6 @@ CONFIG_MIGRATION=y CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=1 -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_DEFAULT_MMAP_MIN_ADDR=8192 @@ -410,6 +415,7 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y @@ -562,6 +568,7 @@ CONFIG_BLK_DEV_DM=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m +# CONFIG_DM_LOG_USERSPACE is not set CONFIG_DM_ZERO=m # CONFIG_DM_MULTIPATH is not set # CONFIG_DM_DELAY is not set @@ -573,7 +580,11 @@ CONFIG_DM_ZERO=m # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -667,6 +678,7 @@ CONFIG_E1000E=m # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=m CONFIG_BNX2=m +# CONFIG_CNIC is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -773,6 +785,7 @@ CONFIG_MOUSE_SERIAL=y # CONFIG_MOUSE_APPLETOUCH is not set # CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_SYNAPTICS_I2C is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set @@ -870,6 +883,7 @@ CONFIG_I2C_ALGOBIT=y # # I2C system bus drivers (mostly embedded / system-on-chip) # +# CONFIG_I2C_DESIGNWARE is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set @@ -898,13 +912,17 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -959,6 +977,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -994,23 +1013,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1284,7 +1289,6 @@ CONFIG_USB=y # # Miscellaneous USB options # -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set @@ -1296,6 +1300,7 @@ CONFIG_USB_DEVICEFS=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=m # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set @@ -1374,7 +1379,6 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set -# CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set @@ -1420,6 +1424,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1448,6 +1453,10 @@ CONFIG_RTC_DRV_STARFIRE=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1480,11 +1489,11 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -1560,7 +1569,7 @@ CONFIG_NETWORK_FILESYSTEMS=y # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y CONFIG_SUN_PARTITION=y -CONFIG_NLS=m +CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_CODEPAGE_437 is not set # CONFIG_NLS_CODEPAGE_737 is not set -- cgit v1.1 From 5e9ad7df9fd056f1071af8aa91034a1c3170257d Mon Sep 17 00:00:00 2001 From: Ingo Molnar <mingo@elte.hu> Date: Tue, 18 Aug 2009 10:41:57 +0200 Subject: [S390] ftrace: update system call tracer support Commit fb34a08c3 ("tracing: Add trace events for each syscall entry/exit") changed the lowlevel API to ftrace syscall tracing but did not update s390 which started making use of it recently. This broke the s390 build, as reported by Paul Mundt. Update the callbacks with the syscall number and the syscall return code values. This allows per syscall tracepoints, syscall argument enumeration /debug/tracing/events/syscalls/ and perfcounters support and integration on s390 too. Reported-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <tip-fb34a08c3469b2be9eae626ccb96476b4687b810@git.kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/s390/kernel/ptrace.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c index 43acd73..c5e87d8 100644 --- a/arch/s390/kernel/ptrace.c +++ b/arch/s390/kernel/ptrace.c @@ -51,6 +51,9 @@ #include "compat_ptrace.h" #endif +DEFINE_TRACE(syscall_enter); +DEFINE_TRACE(syscall_exit); + enum s390_regset { REGSET_GENERAL, REGSET_FP, @@ -662,7 +665,7 @@ asmlinkage long do_syscall_trace_enter(struct pt_regs *regs) } if (unlikely(test_thread_flag(TIF_SYSCALL_FTRACE))) - ftrace_syscall_enter(regs); + trace_syscall_enter(regs, regs->gprs[2]); if (unlikely(current->audit_context)) audit_syscall_entry(is_compat_task() ? @@ -680,7 +683,7 @@ asmlinkage void do_syscall_trace_exit(struct pt_regs *regs) regs->gprs[2]); if (unlikely(test_thread_flag(TIF_SYSCALL_FTRACE))) - ftrace_syscall_exit(regs); + trace_syscall_exit(regs, regs->gprs[2]); if (test_thread_flag(TIF_SYSCALL_TRACE)) tracehook_report_syscall_exit(regs, 0); -- cgit v1.1 From f833bab87fca5c3ce13778421b1365845843b976 Mon Sep 17 00:00:00 2001 From: Suresh Siddha <suresh.b.siddha@intel.com> Date: Mon, 17 Aug 2009 14:34:59 -0700 Subject: clockevent: Prevent dead lock on clockevents_lock Currently clockevents_notify() is called with interrupts enabled at some places and interrupts disabled at some other places. This results in a deadlock in this scenario. cpu A holds clockevents_lock in clockevents_notify() with irqs enabled cpu B waits for clockevents_lock in clockevents_notify() with irqs disabled cpu C doing set_mtrr() which will try to rendezvous of all the cpus. This will result in C and A come to the rendezvous point and waiting for B. B is stuck forever waiting for the spinlock and thus not reaching the rendezvous point. Fix the clockevents code so that clockevents_lock is taken with interrupts disabled and thus avoid the above deadlock. Also call lapic_timer_propagate_broadcast() on the destination cpu so that we avoid calling smp_call_function() in the clockevents notifier chain. This issue left us wondering if we need to change the MTRR rendezvous logic to use stop machine logic (instead of smp_call_function) or add a check in spinlock debug code to see if there are other spinlocks which gets taken under both interrupts enabled/disabled conditions. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Cc: "Pallipadi Venkatesh" <venkatesh.pallipadi@intel.com> Cc: "Brown Len" <len.brown@intel.com> LKML-Reference: <1250544899.2709.210.camel@sbs-t61.sc.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> --- arch/x86/kernel/process.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index 994dd6a..071166a 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -519,16 +519,12 @@ static void c1e_idle(void) if (!cpumask_test_cpu(cpu, c1e_mask)) { cpumask_set_cpu(cpu, c1e_mask); /* - * Force broadcast so ACPI can not interfere. Needs - * to run with interrupts enabled as it uses - * smp_function_call. + * Force broadcast so ACPI can not interfere. */ - local_irq_enable(); clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_FORCE, &cpu); printk(KERN_INFO "Switch to broadcast mode on CPU%d\n", cpu); - local_irq_disable(); } clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu); -- cgit v1.1 From 5416c2663517ebd0be0664c4d4ce3df0b116c059 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Date: Mon, 17 Aug 2009 12:25:41 -0700 Subject: x86: make sure load_percpu_segment has no stackprotector load_percpu_segment() is used to set up the per-cpu segment registers, which are also used for -fstack-protector. Make sure that the load_percpu_segment() function doesn't have stackprotector enabled. [ Impact: allow percpu setup before calling stack-protected functions ] Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> --- arch/x86/kernel/cpu/Makefile | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile index 4e242f9..8b5b9b6 100644 --- a/arch/x86/kernel/cpu/Makefile +++ b/arch/x86/kernel/cpu/Makefile @@ -7,6 +7,10 @@ ifdef CONFIG_FUNCTION_TRACER CFLAGS_REMOVE_common.o = -pg endif +# Make sure load_percpu_segment has no stackprotector +nostackp := $(call cc-option, -fno-stack-protector) +CFLAGS_common.o := $(nostackp) + obj-y := intel_cacheinfo.o addon_cpuid_features.o obj-y += proc.o capflags.o powerflags.o common.o obj-y += vmware.o hypervisor.o -- cgit v1.1 From ce2eef33d35cd7b932492b5a81fb0febd2b323cd Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Date: Mon, 17 Aug 2009 12:26:53 -0700 Subject: xen: rearrange things to fix stackprotector Make sure the stack-protector segment registers are properly set up before calling any functions which may have stack-protection compiled into them. [ Impact: prevent Xen early-boot crash when stack-protector is enabled ] Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> --- arch/x86/xen/Makefile | 4 ++++ arch/x86/xen/enlighten.c | 22 ++++++++++------------ 2 files changed, 14 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/x86/xen/Makefile b/arch/x86/xen/Makefile index 3b767d0..a5b9288 100644 --- a/arch/x86/xen/Makefile +++ b/arch/x86/xen/Makefile @@ -5,6 +5,10 @@ CFLAGS_REMOVE_time.o = -pg CFLAGS_REMOVE_irq.o = -pg endif +# Make sure early boot has no stackprotector +nostackp := $(call cc-option, -fno-stack-protector) +CFLAGS_enlighten.o := $(nostackp) + obj-y := enlighten.o setup.o multicalls.o mmu.o irq.o \ time.o xen-asm.o xen-asm_$(BITS).o \ grant-table.o suspend.o diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index f09e8c3..edcf72a 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -925,10 +925,6 @@ asmlinkage void __init xen_start_kernel(void) xen_domain_type = XEN_PV_DOMAIN; - BUG_ON(memcmp(xen_start_info->magic, "xen-3", 5) != 0); - - xen_setup_features(); - /* Install Xen paravirt ops */ pv_info = xen_info; pv_init_ops = xen_init_ops; @@ -937,8 +933,15 @@ asmlinkage void __init xen_start_kernel(void) pv_apic_ops = xen_apic_ops; pv_mmu_ops = xen_mmu_ops; - xen_init_irq_ops(); +#ifdef CONFIG_X86_64 + /* + * Setup percpu state. We only need to do this for 64-bit + * because 32-bit already has %fs set properly. + */ + load_percpu_segment(0); +#endif + xen_init_irq_ops(); xen_init_cpuid_mask(); #ifdef CONFIG_X86_LOCAL_APIC @@ -948,6 +951,8 @@ asmlinkage void __init xen_start_kernel(void) set_xen_basic_apic_ops(); #endif + xen_setup_features(); + if (xen_feature(XENFEAT_mmu_pt_update_preserve_ad)) { pv_mmu_ops.ptep_modify_prot_start = xen_ptep_modify_prot_start; pv_mmu_ops.ptep_modify_prot_commit = xen_ptep_modify_prot_commit; @@ -955,13 +960,6 @@ asmlinkage void __init xen_start_kernel(void) machine_ops = xen_machine_ops; -#ifdef CONFIG_X86_64 - /* - * Setup percpu state. We only need to do this for 64-bit - * because 32-bit already has %fs set properly. - */ - load_percpu_segment(0); -#endif /* * The only reliable way to retain the initial address of the * percpu gdt_page is to remember it here, so we can go and -- cgit v1.1 From fc0ce23506d943b9eaa731a051769d0e0605eb03 Mon Sep 17 00:00:00 2001 From: Jan Beulich <JBeulich@novell.com> Date: Thu, 20 Aug 2009 16:14:15 +0100 Subject: x86: add vmlinux.lds to targets in arch/x86/boot/compressed/Makefile The absence of vmlinux.lds here keeps .vmlinux.lds.cmd from being included, which in turn leads to it and all its dependents always getting rebuilt independent of whether they are already up-to-date. Signed-off-by: Jan Beulich <jbeulich@novell.com> LKML-Reference: <4A8D84670200007800010D31@vpn.id2.novell.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> --- arch/x86/boot/compressed/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile index e2ff504..f8ed065 100644 --- a/arch/x86/boot/compressed/Makefile +++ b/arch/x86/boot/compressed/Makefile @@ -4,7 +4,7 @@ # create a compressed vmlinux image from the original vmlinux # -targets := vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma head_$(BITS).o misc.o piggy.o +targets := vmlinux.lds vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma head_$(BITS).o misc.o piggy.o KBUILD_CFLAGS := -m$(BITS) -D__KERNEL__ $(LINUX_INCLUDE) -O2 KBUILD_CFLAGS += -fno-strict-aliasing -fPIC -- cgit v1.1 From 83d349f35e1ae72268c5104dbf9ab2ae635425d4 Mon Sep 17 00:00:00 2001 From: Linus Torvalds <torvalds@linux-foundation.org> Date: Fri, 21 Aug 2009 09:23:57 -0700 Subject: x86: don't send an IPI to the empty set of CPU's MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The default_send_IPI_mask_logical() function uses the "flat" APIC mode to send an IPI to a set of CPU's at once, but if that set happens to be empty, some older local APIC's will apparently be rather unhappy. So just warn if a caller gives us an empty mask, and ignore it. This fixes a regression in 2.6.30.x, due to commit 4595f9620 ("x86: change flush_tlb_others to take a const struct cpumask"), documented here: http://bugzilla.kernel.org/show_bug.cgi?id=13933 which causes a silent lock-up. It only seems to happen on PPro, P2, P3 and Athlon XP cores. Most developers sadly (or not so sadly, if you're a developer..) have more modern CPU's. Also, on x86-64 we don't use the flat APIC mode, so it would never trigger there even if the APIC didn't like sending an empty IPI mask. Reported-by: Pavel Vilim <wylda@volny.cz> Reported-and-tested-by: Thomas Björnell <thomas.bjornell@gmail.com> Reported-and-tested-by: Martin Rogge <marogge@onlinehome.de> Cc: Mike Travis <travis@sgi.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> --- arch/x86/kernel/apic/ipi.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/apic/ipi.c b/arch/x86/kernel/apic/ipi.c index dbf5445..6ef00ba 100644 --- a/arch/x86/kernel/apic/ipi.c +++ b/arch/x86/kernel/apic/ipi.c @@ -106,6 +106,9 @@ void default_send_IPI_mask_logical(const struct cpumask *cpumask, int vector) unsigned long mask = cpumask_bits(cpumask)[0]; unsigned long flags; + if (WARN_ONCE(!mask, "empty IPI mask")) + return; + local_irq_save(flags); WARN_ON(mask & ~cpumask_bits(cpu_online_mask)[0]); __default_send_IPI_dest_field(mask, vector, apic->dest_logical); -- cgit v1.1 From b04e6373d694e977c95ae0ae000e2c1e2cf92d73 Mon Sep 17 00:00:00 2001 From: Linus Torvalds <torvalds@linux-foundation.org> Date: Fri, 21 Aug 2009 09:48:10 -0700 Subject: x86: don't call '->send_IPI_mask()' with an empty mask MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit As noted in 83d349f35e1ae72268c5104dbf9ab2ae635425d4 ("x86: don't send an IPI to the empty set of CPU's"), some APIC's will be very unhappy with an empty destination mask. That commit added a WARN_ON() for that case, and avoided the resulting problem, but didn't fix the underlying reason for why those empty mask cases happened. This fixes that, by checking the result of 'cpumask_andnot()' of the current CPU actually has any other CPU's left in the set of CPU's to be sent a TLB flush, and not calling down to the IPI code if the mask is empty. The reason this started happening at all is that we started passing just the CPU mask pointers around in commit 4595f9620 ("x86: change flush_tlb_others to take a const struct cpumask"), and when we did that, the cpumask was no longer thread-local. Before that commit, flush_tlb_mm() used to create it's own copy of 'mm->cpu_vm_mask' and pass that copy down to the low-level flush routines after having tested that it was not empty. But after changing it to just pass down the CPU mask pointer, the lower level TLB flush routines would now get a pointer to that 'mm->cpu_vm_mask', and that could still change - and become empty - after the test due to other CPU's having flushed their own TLB's. See http://bugzilla.kernel.org/show_bug.cgi?id=13933 for details. Tested-by: Thomas Björnell <thomas.bjornell@gmail.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> --- arch/x86/mm/tlb.c | 21 ++++++++++----------- 1 file changed, 10 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c index 821e970..c814e14 100644 --- a/arch/x86/mm/tlb.c +++ b/arch/x86/mm/tlb.c @@ -183,18 +183,17 @@ static void flush_tlb_others_ipi(const struct cpumask *cpumask, f->flush_mm = mm; f->flush_va = va; - cpumask_andnot(to_cpumask(f->flush_cpumask), - cpumask, cpumask_of(smp_processor_id())); - - /* - * We have to send the IPI only to - * CPUs affected. - */ - apic->send_IPI_mask(to_cpumask(f->flush_cpumask), - INVALIDATE_TLB_VECTOR_START + sender); + if (cpumask_andnot(to_cpumask(f->flush_cpumask), cpumask, cpumask_of(smp_processor_id()))) { + /* + * We have to send the IPI only to + * CPUs affected. + */ + apic->send_IPI_mask(to_cpumask(f->flush_cpumask), + INVALIDATE_TLB_VECTOR_START + sender); - while (!cpumask_empty(to_cpumask(f->flush_cpumask))) - cpu_relax(); + while (!cpumask_empty(to_cpumask(f->flush_cpumask))) + cpu_relax(); + } f->flush_mm = NULL; f->flush_va = 0; -- cgit v1.1 From 637952ca689013339b977558061fa4ca8e07e1c1 Mon Sep 17 00:00:00 2001 From: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Date: Sun, 23 Aug 2009 18:09:06 +0200 Subject: [S390] set preferred console based on conmode setup_arch() unconditionally sets the preferred console to ttyS. This breaks the use of 3270 devices as the console. Provide a new function to set the default preferred console for s390. The preferred console depends on the conmode parameter that is used to switch between 3270 and 3215 terminal/console mode. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> --- arch/s390/kernel/setup.c | 25 ++++++++++++++++++------- 1 file changed, 18 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index 9717717..cbb897b 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -154,6 +154,20 @@ static int __init condev_setup(char *str) __setup("condev=", condev_setup); +static void __init set_preferred_console(void) +{ + if (MACHINE_IS_KVM) { + add_preferred_console("hvc", 0, NULL); + s390_virtio_console_init(); + return; + } + + if (CONSOLE_IS_3215 || CONSOLE_IS_SCLP) + add_preferred_console("ttyS", 0, NULL); + if (CONSOLE_IS_3270) + add_preferred_console("tty3270", 0, NULL); +} + static int __init conmode_setup(char *str) { #if defined(CONFIG_SCLP_CONSOLE) || defined(CONFIG_SCLP_VT220_CONSOLE) @@ -168,6 +182,7 @@ static int __init conmode_setup(char *str) if (strncmp(str, "3270", 5) == 0) SET_CONSOLE_3270; #endif + set_preferred_console(); return 1; } @@ -780,9 +795,6 @@ static void __init setup_hwcaps(void) void __init setup_arch(char **cmdline_p) { - /* set up preferred console */ - add_preferred_console("ttyS", 0, NULL); - /* * print what head.S has found out about the machine */ @@ -802,11 +814,9 @@ setup_arch(char **cmdline_p) if (MACHINE_IS_VM) pr_info("Linux is running as a z/VM " "guest operating system in 64-bit mode\n"); - else if (MACHINE_IS_KVM) { + else if (MACHINE_IS_KVM) pr_info("Linux is running under KVM in 64-bit mode\n"); - add_preferred_console("hvc", 0, NULL); - s390_virtio_console_init(); - } else + else pr_info("Linux is running natively in 64-bit mode\n"); #endif /* CONFIG_64BIT */ @@ -851,6 +861,7 @@ setup_arch(char **cmdline_p) /* Setup default console */ conmode_default(); + set_preferred_console(); /* Setup zfcpdump support */ setup_zfcpdump(console_devno); -- cgit v1.1 From 3e475f579e56caf57cadc0cc995c152f9da641a9 Mon Sep 17 00:00:00 2001 From: Martin Michlmayr <tbm@cyrius.com> Date: Mon, 17 Aug 2009 23:34:10 -1000 Subject: [ARM] Kirkwood: __init requires linux/init.h MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Include linux/init.h for __init to fix this error: CC [M] drivers/net/wireless/wl12xx/boot.o In file included from arch/arm/mach-kirkwood/include/mach/gpio.h:13, from arch/arm/include/asm/gpio.h:5, from include/linux/gpio.h:7, from drivers/net/wireless/wl12xx/boot.c:24: arch/arm/plat-orion/include/plat/gpio.h:32: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘orion_gpio_init’ make[6]: *** [drivers/net/wireless/wl12xx/boot.o] Error 1 make[5]: *** [drivers/net/wireless/wl12xx] Error 2 Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Nicolas Pitre <nico@marvell.com> --- arch/arm/plat-orion/include/plat/gpio.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/plat-orion/include/plat/gpio.h b/arch/arm/plat-orion/include/plat/gpio.h index 9646a94..07c430f 100644 --- a/arch/arm/plat-orion/include/plat/gpio.h +++ b/arch/arm/plat-orion/include/plat/gpio.h @@ -11,6 +11,8 @@ #ifndef __PLAT_GPIO_H #define __PLAT_GPIO_H +#include <linux/init.h> + /* * GENERIC_GPIO primitives. */ -- cgit v1.1 From c55bf102b675c94edef006ce487d909669221d90 Mon Sep 17 00:00:00 2001 From: John Holland <john.holland@cellent-fs.de> Date: Wed, 19 Aug 2009 13:24:03 -1000 Subject: [ARM] Kirkwood: enable eSATA on QNAP TS-219P Initialize PCI/PCIe on the QNAP TS-119, TS-219 and TS-219P hardware allowing the use of the discrete eSATA controller connected to the PCIe bus in the TS-219P. Signed-off-by: John Holland <john.holland@cellent-fs.de> Tested-by: Thomas Reitmayr <treitmayr@devbase.at> Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Nicolas Pitre <nico@marvell.com> --- arch/arm/configs/kirkwood_defconfig | 2 +- arch/arm/mach-kirkwood/ts219-setup.c | 9 +++++++++ 2 files changed, 10 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig index 0a1abb9..af74cc2 100644 --- a/arch/arm/configs/kirkwood_defconfig +++ b/arch/arm/configs/kirkwood_defconfig @@ -629,7 +629,7 @@ CONFIG_SCSI_LOWLEVEL=y CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y -# CONFIG_SATA_AHCI is not set +CONFIG_SATA_AHCI=y # CONFIG_SATA_SIL24 is not set CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c index 01aa213..ec1a64f 100644 --- a/arch/arm/mach-kirkwood/ts219-setup.c +++ b/arch/arm/mach-kirkwood/ts219-setup.c @@ -206,6 +206,15 @@ static void __init qnap_ts219_init(void) } +static int __init ts219_pci_init(void) +{ + if (machine_is_ts219()) + kirkwood_pcie_init(); + + return 0; +} +subsys_initcall(ts219_pci_init); + MACHINE_START(TS219, "QNAP TS-119/TS-219") /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */ .phys_io = KIRKWOOD_REGS_PHYS_BASE, -- cgit v1.1 From a6a06f7b577f89d0b916c5ccaff67ca5ed444a78 Mon Sep 17 00:00:00 2001 From: Amerigo Wang <amwang@redhat.com> Date: Fri, 21 Aug 2009 04:34:45 -0400 Subject: x86: Fix an incorrect argument of reserve_bootmem() This line looks suspicious, because if this is true, then the 'flags' parameter of function reserve_bootmem_generic() will be unused when !CONFIG_NUMA. I don't think this is what we want. Signed-off-by: WANG Cong <amwang@redhat.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: akpm@linux-foundation.org LKML-Reference: <20090821083709.5098.52505.sendpatchset@localhost.localdomain> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/mm/init_64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index 6176fe8..ea56b8c 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -796,7 +796,7 @@ int __init reserve_bootmem_generic(unsigned long phys, unsigned long len, return ret; #else - reserve_bootmem(phys, len, BOOTMEM_DEFAULT); + reserve_bootmem(phys, len, flags); #endif if (phys+len <= MAX_DMA_PFN*PAGE_SIZE) { -- cgit v1.1 From c62e43202e7cf50ca24bce58b255df7bf5de69d0 Mon Sep 17 00:00:00 2001 From: Jan Beulich <JBeulich@novell.com> Date: Tue, 25 Aug 2009 14:50:53 +0100 Subject: x86: Fix build with older binutils and consolidate linker script binutils prior to 2.17 can't deal with the currently possible situation of a new segment following the per-CPU segment, but that new segment being empty - objcopy misplaces the .bss (and perhaps also the .brk) sections outside of any segment. However, the current ordering of sections really just appears to be the effect of cumulative unrelated changes; re-ordering things allows to easily guarantee that the segment following the per-CPU one is non-empty, and at once eliminates the need for the bogus data.init2 segment. Once touching this code, also use the various data section helper macros from include/asm-generic/vmlinux.lds.h. -v2: fix !SMP builds. Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: <sam@ravnborg.org> LKML-Reference: <4A94085D02000078000119A5@vpn.id2.novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/kernel/vmlinux.lds.S | 126 ++++++++++++++++-------------------------- 1 file changed, 47 insertions(+), 79 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S index 78d185d..9fc1782 100644 --- a/arch/x86/kernel/vmlinux.lds.S +++ b/arch/x86/kernel/vmlinux.lds.S @@ -46,11 +46,10 @@ PHDRS { data PT_LOAD FLAGS(7); /* RWE */ #ifdef CONFIG_X86_64 user PT_LOAD FLAGS(7); /* RWE */ - data.init PT_LOAD FLAGS(7); /* RWE */ #ifdef CONFIG_SMP percpu PT_LOAD FLAGS(7); /* RWE */ #endif - data.init2 PT_LOAD FLAGS(7); /* RWE */ + init PT_LOAD FLAGS(7); /* RWE */ #endif note PT_NOTE FLAGS(0); /* ___ */ } @@ -103,65 +102,43 @@ SECTIONS __stop___ex_table = .; } :text = 0x9090 - RODATA + RO_DATA(PAGE_SIZE) /* Data */ - . = ALIGN(PAGE_SIZE); .data : AT(ADDR(.data) - LOAD_OFFSET) { /* Start of data section */ _sdata = .; - DATA_DATA - CONSTRUCTORS - } :data + + /* init_task */ + INIT_TASK_DATA(THREAD_SIZE) #ifdef CONFIG_X86_32 - /* 32 bit has nosave before _edata */ - . = ALIGN(PAGE_SIZE); - .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) { - __nosave_begin = .; - *(.data.nosave) - . = ALIGN(PAGE_SIZE); - __nosave_end = .; - } + /* 32 bit has nosave before _edata */ + NOSAVE_DATA #endif - . = ALIGN(PAGE_SIZE); - .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) { - *(.data.page_aligned) + PAGE_ALIGNED_DATA(PAGE_SIZE) *(.data.idt) - } -#ifdef CONFIG_X86_32 - . = ALIGN(32); -#else - . = ALIGN(PAGE_SIZE); - . = ALIGN(CONFIG_X86_L1_CACHE_BYTES); -#endif - .data.cacheline_aligned : - AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) { - *(.data.cacheline_aligned) - } + CACHELINE_ALIGNED_DATA(CONFIG_X86_L1_CACHE_BYTES) - /* rarely changed data like cpu maps */ -#ifdef CONFIG_X86_32 - . = ALIGN(32); -#else - . = ALIGN(CONFIG_X86_INTERNODE_CACHE_BYTES); -#endif - .data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) { - *(.data.read_mostly) + DATA_DATA + CONSTRUCTORS + + /* rarely changed data like cpu maps */ + READ_MOSTLY_DATA(CONFIG_X86_INTERNODE_CACHE_BYTES) /* End of data section */ _edata = .; - } + } :data #ifdef CONFIG_X86_64 #define VSYSCALL_ADDR (-10*1024*1024) -#define VSYSCALL_PHYS_ADDR ((LOADADDR(.data.read_mostly) + \ - SIZEOF(.data.read_mostly) + 4095) & ~(4095)) -#define VSYSCALL_VIRT_ADDR ((ADDR(.data.read_mostly) + \ - SIZEOF(.data.read_mostly) + 4095) & ~(4095)) +#define VSYSCALL_PHYS_ADDR ((LOADADDR(.data) + SIZEOF(.data) + \ + PAGE_SIZE - 1) & ~(PAGE_SIZE - 1)) +#define VSYSCALL_VIRT_ADDR ((ADDR(.data) + SIZEOF(.data) + \ + PAGE_SIZE - 1) & ~(PAGE_SIZE - 1)) #define VLOAD_OFFSET (VSYSCALL_ADDR - VSYSCALL_PHYS_ADDR) #define VLOAD(x) (ADDR(x) - VLOAD_OFFSET) @@ -227,35 +204,29 @@ SECTIONS #endif /* CONFIG_X86_64 */ - /* init_task */ - . = ALIGN(THREAD_SIZE); - .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) { - *(.data.init_task) + /* Init code and data - will be freed after init */ + . = ALIGN(PAGE_SIZE); + .init.begin : AT(ADDR(.init.begin) - LOAD_OFFSET) { + __init_begin = .; /* paired with __init_end */ } -#ifdef CONFIG_X86_64 - :data.init -#endif +#if defined(CONFIG_X86_64) && defined(CONFIG_SMP) /* - * smp_locks might be freed after init - * start/end must be page aligned + * percpu offsets are zero-based on SMP. PERCPU_VADDR() changes the + * output PHDR, so the next output section - .init.text - should + * start another segment - init. */ - . = ALIGN(PAGE_SIZE); - .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) { - __smp_locks = .; - *(.smp_locks) - __smp_locks_end = .; - . = ALIGN(PAGE_SIZE); - } + PERCPU_VADDR(0, :percpu) +#endif - /* Init code and data - will be freed after init */ - . = ALIGN(PAGE_SIZE); .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) { - __init_begin = .; /* paired with __init_end */ _sinittext = .; INIT_TEXT _einittext = .; } +#ifdef CONFIG_X86_64 + :init +#endif .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) { INIT_DATA @@ -326,17 +297,7 @@ SECTIONS } #endif -#if defined(CONFIG_X86_64) && defined(CONFIG_SMP) - /* - * percpu offsets are zero-based on SMP. PERCPU_VADDR() changes the - * output PHDR, so the next output section - __data_nosave - should - * start another section data.init2. Also, pda should be at the head of - * percpu area. Preallocate it and define the percpu offset symbol - * so that it can be accessed as a percpu variable. - */ - . = ALIGN(PAGE_SIZE); - PERCPU_VADDR(0, :percpu) -#else +#if !defined(CONFIG_X86_64) || !defined(CONFIG_SMP) PERCPU(PAGE_SIZE) #endif @@ -347,15 +308,22 @@ SECTIONS __init_end = .; } + /* + * smp_locks might be freed after init + * start/end must be page aligned + */ + . = ALIGN(PAGE_SIZE); + .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) { + __smp_locks = .; + *(.smp_locks) + __smp_locks_end = .; + . = ALIGN(PAGE_SIZE); + } + #ifdef CONFIG_X86_64 .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) { - . = ALIGN(PAGE_SIZE); - __nosave_begin = .; - *(.data.nosave) - . = ALIGN(PAGE_SIZE); - __nosave_end = .; - } :data.init2 - /* use another section data.init2, see PERCPU_VADDR() above */ + NOSAVE_DATA + } #endif /* BSS */ -- cgit v1.1 From 667000011927b4fcc359beac4a2447889db6d349 Mon Sep 17 00:00:00 2001 From: Josh Stone <jistone@redhat.com> Date: Mon, 24 Aug 2009 14:43:11 -0700 Subject: tracing: Rename FTRACE_SYSCALLS for tracepoints s/HAVE_FTRACE_SYSCALLS/HAVE_SYSCALL_TRACEPOINTS/g s/TIF_SYSCALL_FTRACE/TIF_SYSCALL_TRACEPOINT/g The syscall enter/exit tracing is no longer specific to just ftrace, so they now have names that reflect their tie to tracepoints instead. Signed-off-by: Josh Stone <jistone@redhat.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Martin Bligh <mbligh@google.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> LKML-Reference: <1251150194-1713-2-git-send-email-jistone@redhat.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> --- arch/s390/Kconfig | 2 +- arch/s390/defconfig | 2 +- arch/s390/include/asm/thread_info.h | 4 ++-- arch/s390/kernel/entry.S | 2 +- arch/s390/kernel/entry64.S | 2 +- arch/s390/kernel/ptrace.c | 4 ++-- arch/x86/Kconfig | 2 +- arch/x86/configs/i386_defconfig | 2 +- arch/x86/configs/x86_64_defconfig | 2 +- arch/x86/include/asm/thread_info.h | 13 +++++++------ arch/x86/kernel/ptrace.c | 4 ++-- 11 files changed, 20 insertions(+), 19 deletions(-) (limited to 'arch') diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index 2ae5d72..7238ef4 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -84,7 +84,7 @@ config S390 select HAVE_FUNCTION_TRACER select HAVE_FUNCTION_TRACE_MCOUNT_TEST select HAVE_FTRACE_MCOUNT_RECORD - select HAVE_FTRACE_SYSCALLS + select HAVE_SYSCALL_TRACEPOINTS select HAVE_DYNAMIC_FTRACE select HAVE_FUNCTION_GRAPH_TRACER select HAVE_DEFAULT_NO_SPIN_MUTEXES diff --git a/arch/s390/defconfig b/arch/s390/defconfig index fcba206..4e91a25 100644 --- a/arch/s390/defconfig +++ b/arch/s390/defconfig @@ -900,7 +900,7 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_FTRACE_SYSCALLS=y +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y CONFIG_TRACING_SUPPORT=y CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set diff --git a/arch/s390/include/asm/thread_info.h b/arch/s390/include/asm/thread_info.h index ba1cab9..07eb61b 100644 --- a/arch/s390/include/asm/thread_info.h +++ b/arch/s390/include/asm/thread_info.h @@ -92,7 +92,7 @@ static inline struct thread_info *current_thread_info(void) #define TIF_SYSCALL_TRACE 8 /* syscall trace active */ #define TIF_SYSCALL_AUDIT 9 /* syscall auditing active */ #define TIF_SECCOMP 10 /* secure computing */ -#define TIF_SYSCALL_FTRACE 11 /* ftrace syscall instrumentation */ +#define TIF_SYSCALL_TRACEPOINT 11 /* syscall tracepoint instrumentation */ #define TIF_USEDFPU 16 /* FPU was used by this task this quantum (SMP) */ #define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling TIF_NEED_RESCHED */ @@ -111,7 +111,7 @@ static inline struct thread_info *current_thread_info(void) #define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE) #define _TIF_SYSCALL_AUDIT (1<<TIF_SYSCALL_AUDIT) #define _TIF_SECCOMP (1<<TIF_SECCOMP) -#define _TIF_SYSCALL_FTRACE (1<<TIF_SYSCALL_FTRACE) +#define _TIF_SYSCALL_TRACEPOINT (1<<TIF_SYSCALL_TRACEPOINT) #define _TIF_USEDFPU (1<<TIF_USEDFPU) #define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG) #define _TIF_31BIT (1<<TIF_31BIT) diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S index c4c80a2..5d40fce 100644 --- a/arch/s390/kernel/entry.S +++ b/arch/s390/kernel/entry.S @@ -54,7 +54,7 @@ _TIF_WORK_SVC = (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED | \ _TIF_WORK_INT = (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED | \ _TIF_MCCK_PENDING) _TIF_SYSCALL = (_TIF_SYSCALL_TRACE>>8 | _TIF_SYSCALL_AUDIT>>8 | \ - _TIF_SECCOMP>>8 | _TIF_SYSCALL_FTRACE>>8) + _TIF_SECCOMP>>8 | _TIF_SYSCALL_TRACEPOINT>>8) STACK_SHIFT = PAGE_SHIFT + THREAD_ORDER STACK_SIZE = 1 << STACK_SHIFT diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S index f6618e9..3ceb53c 100644 --- a/arch/s390/kernel/entry64.S +++ b/arch/s390/kernel/entry64.S @@ -57,7 +57,7 @@ _TIF_WORK_SVC = (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED | \ _TIF_WORK_INT = (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED | \ _TIF_MCCK_PENDING) _TIF_SYSCALL = (_TIF_SYSCALL_TRACE>>8 | _TIF_SYSCALL_AUDIT>>8 | \ - _TIF_SECCOMP>>8 | _TIF_SYSCALL_FTRACE>>8) + _TIF_SECCOMP>>8 | _TIF_SYSCALL_TRACEPOINT>>8) #define BASED(name) name-system_call(%r13) diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c index c5e87d8..9d3dcfa 100644 --- a/arch/s390/kernel/ptrace.c +++ b/arch/s390/kernel/ptrace.c @@ -664,7 +664,7 @@ asmlinkage long do_syscall_trace_enter(struct pt_regs *regs) ret = -1; } - if (unlikely(test_thread_flag(TIF_SYSCALL_FTRACE))) + if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT))) trace_syscall_enter(regs, regs->gprs[2]); if (unlikely(current->audit_context)) @@ -682,7 +682,7 @@ asmlinkage void do_syscall_trace_exit(struct pt_regs *regs) audit_syscall_exit(AUDITSC_RESULT(regs->gprs[2]), regs->gprs[2]); - if (unlikely(test_thread_flag(TIF_SYSCALL_FTRACE))) + if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT))) trace_syscall_exit(regs, regs->gprs[2]); if (test_thread_flag(TIF_SYSCALL_TRACE)) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 738bdc6..d59cbf7 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -37,7 +37,7 @@ config X86 select HAVE_FUNCTION_GRAPH_FP_TEST select HAVE_FUNCTION_TRACE_MCOUNT_TEST select HAVE_FTRACE_NMI_ENTER if DYNAMIC_FTRACE - select HAVE_FTRACE_SYSCALLS + select HAVE_SYSCALL_TRACEPOINTS select HAVE_KVM select HAVE_ARCH_KGDB select HAVE_ARCH_TRACEHOOK diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig index edb992e..d28fad1 100644 --- a/arch/x86/configs/i386_defconfig +++ b/arch/x86/configs/i386_defconfig @@ -2355,7 +2355,7 @@ CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_HAVE_HW_BRANCH_TRACER=y -CONFIG_HAVE_FTRACE_SYSCALLS=y +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y CONFIG_RING_BUFFER=y CONFIG_TRACING=y CONFIG_TRACING_SUPPORT=y diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig index cee1dd2..6c86acd 100644 --- a/arch/x86/configs/x86_64_defconfig +++ b/arch/x86/configs/x86_64_defconfig @@ -2329,7 +2329,7 @@ CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_HAVE_HW_BRANCH_TRACER=y -CONFIG_HAVE_FTRACE_SYSCALLS=y +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y CONFIG_RING_BUFFER=y CONFIG_TRACING=y CONFIG_TRACING_SUPPORT=y diff --git a/arch/x86/include/asm/thread_info.h b/arch/x86/include/asm/thread_info.h index fad7d40..6f7786a 100644 --- a/arch/x86/include/asm/thread_info.h +++ b/arch/x86/include/asm/thread_info.h @@ -95,7 +95,7 @@ struct thread_info { #define TIF_DEBUGCTLMSR 25 /* uses thread_struct.debugctlmsr */ #define TIF_DS_AREA_MSR 26 /* uses thread_struct.ds_area_msr */ #define TIF_LAZY_MMU_UPDATES 27 /* task is updating the mmu lazily */ -#define TIF_SYSCALL_FTRACE 28 /* for ftrace syscall instrumentation */ +#define TIF_SYSCALL_TRACEPOINT 28 /* syscall tracepoint instrumentation */ #define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) #define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME) @@ -118,17 +118,17 @@ struct thread_info { #define _TIF_DEBUGCTLMSR (1 << TIF_DEBUGCTLMSR) #define _TIF_DS_AREA_MSR (1 << TIF_DS_AREA_MSR) #define _TIF_LAZY_MMU_UPDATES (1 << TIF_LAZY_MMU_UPDATES) -#define _TIF_SYSCALL_FTRACE (1 << TIF_SYSCALL_FTRACE) +#define _TIF_SYSCALL_TRACEPOINT (1 << TIF_SYSCALL_TRACEPOINT) /* work to do in syscall_trace_enter() */ #define _TIF_WORK_SYSCALL_ENTRY \ - (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_EMU | _TIF_SYSCALL_FTRACE | \ - _TIF_SYSCALL_AUDIT | _TIF_SECCOMP | _TIF_SINGLESTEP) + (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_EMU | _TIF_SYSCALL_AUDIT | \ + _TIF_SECCOMP | _TIF_SINGLESTEP | _TIF_SYSCALL_TRACEPOINT) /* work to do in syscall_trace_leave() */ #define _TIF_WORK_SYSCALL_EXIT \ (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | _TIF_SINGLESTEP | \ - _TIF_SYSCALL_FTRACE) + _TIF_SYSCALL_TRACEPOINT) /* work to do on interrupt/exception return */ #define _TIF_WORK_MASK \ @@ -137,7 +137,8 @@ struct thread_info { _TIF_SINGLESTEP|_TIF_SECCOMP|_TIF_SYSCALL_EMU)) /* work to do on any return to user space */ -#define _TIF_ALLWORK_MASK ((0x0000FFFF & ~_TIF_SECCOMP) | _TIF_SYSCALL_FTRACE) +#define _TIF_ALLWORK_MASK \ + ((0x0000FFFF & ~_TIF_SECCOMP) | _TIF_SYSCALL_TRACEPOINT) /* Only used for 64 bit */ #define _TIF_DO_NOTIFY_MASK \ diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c index 34dd6f1..a909afe 100644 --- a/arch/x86/kernel/ptrace.c +++ b/arch/x86/kernel/ptrace.c @@ -1500,7 +1500,7 @@ asmregparm long syscall_trace_enter(struct pt_regs *regs) tracehook_report_syscall_entry(regs)) ret = -1L; - if (unlikely(test_thread_flag(TIF_SYSCALL_FTRACE))) + if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT))) trace_syscall_enter(regs, regs->orig_ax); if (unlikely(current->audit_context)) { @@ -1526,7 +1526,7 @@ asmregparm void syscall_trace_leave(struct pt_regs *regs) if (unlikely(current->audit_context)) audit_syscall_exit(AUDITSC_RESULT(regs->ax), regs->ax); - if (unlikely(test_thread_flag(TIF_SYSCALL_FTRACE))) + if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT))) trace_syscall_exit(regs, regs->ax); if (test_thread_flag(TIF_SYSCALL_TRACE)) -- cgit v1.1 From 97419875865859fd2403e66266c02ce028e2f5ab Mon Sep 17 00:00:00 2001 From: Josh Stone <jistone@redhat.com> Date: Mon, 24 Aug 2009 14:43:13 -0700 Subject: tracing: Move tracepoint callbacks from declaration to definition It's not strictly correct for the tracepoint reg/unreg callbacks to occur when a client is hooking up, because the actual tracepoint may not be present yet. This happens to be fine for syscall, since that's in the core kernel, but it would cause problems for tracepoints defined in a module that hasn't been loaded yet. It also means the reg/unreg has to be EXPORTed for any modules to use the tracepoint (as in SystemTap). This patch removes DECLARE_TRACE_WITH_CALLBACK, and instead introduces DEFINE_TRACE_FN which stores the callbacks in struct tracepoint. The callbacks are used now when the active state of the tracepoint changes in set_tracepoint & disable_tracepoint. This also introduces TRACE_EVENT_FN, so ftrace events can also provide registration callbacks if needed. Signed-off-by: Josh Stone <jistone@redhat.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Martin Bligh <mbligh@google.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> LKML-Reference: <1251150194-1713-4-git-send-email-jistone@redhat.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> --- arch/s390/kernel/ptrace.c | 4 ++-- arch/x86/kernel/ptrace.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c index 9d3dcfa..c05b44b 100644 --- a/arch/s390/kernel/ptrace.c +++ b/arch/s390/kernel/ptrace.c @@ -51,8 +51,8 @@ #include "compat_ptrace.h" #endif -DEFINE_TRACE(syscall_enter); -DEFINE_TRACE(syscall_exit); +DEFINE_TRACE_FN(syscall_enter, syscall_regfunc, syscall_unregfunc); +DEFINE_TRACE_FN(syscall_exit, syscall_regfunc, syscall_unregfunc); enum s390_regset { REGSET_GENERAL, diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c index a909afe..31e9b97 100644 --- a/arch/x86/kernel/ptrace.c +++ b/arch/x86/kernel/ptrace.c @@ -37,8 +37,8 @@ #include <trace/syscall.h> -DEFINE_TRACE(syscall_enter); -DEFINE_TRACE(syscall_exit); +DEFINE_TRACE_FN(syscall_enter, syscall_regfunc, syscall_unregfunc); +DEFINE_TRACE_FN(syscall_exit, syscall_regfunc, syscall_unregfunc); #include "tls.h" -- cgit v1.1 From 1c569f0264ea629c10bbab471dd0626ce4d3f19f Mon Sep 17 00:00:00 2001 From: Josh Stone <jistone@redhat.com> Date: Mon, 24 Aug 2009 14:43:14 -0700 Subject: tracing: Create generic syscall TRACE_EVENTs This converts the syscall_enter/exit tracepoints into TRACE_EVENTs, so you can have generic ftrace events that capture all system calls with arguments and return values. These generic events are also renamed to sys_enter/exit, so they're more closely aligned to the specific sys_enter_foo events. Signed-off-by: Josh Stone <jistone@redhat.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Martin Bligh <mbligh@google.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> LKML-Reference: <1251150194-1713-5-git-send-email-jistone@redhat.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> --- arch/s390/kernel/ptrace.c | 8 ++++---- arch/x86/kernel/ptrace.c | 12 +++++------- 2 files changed, 9 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c index c05b44b..f3ddd7a 100644 --- a/arch/s390/kernel/ptrace.c +++ b/arch/s390/kernel/ptrace.c @@ -51,8 +51,8 @@ #include "compat_ptrace.h" #endif -DEFINE_TRACE_FN(syscall_enter, syscall_regfunc, syscall_unregfunc); -DEFINE_TRACE_FN(syscall_exit, syscall_regfunc, syscall_unregfunc); +#define CREATE_TRACE_POINTS +#include <trace/events/syscalls.h> enum s390_regset { REGSET_GENERAL, @@ -665,7 +665,7 @@ asmlinkage long do_syscall_trace_enter(struct pt_regs *regs) } if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT))) - trace_syscall_enter(regs, regs->gprs[2]); + trace_sys_enter(regs, regs->gprs[2]); if (unlikely(current->audit_context)) audit_syscall_entry(is_compat_task() ? @@ -683,7 +683,7 @@ asmlinkage void do_syscall_trace_exit(struct pt_regs *regs) regs->gprs[2]); if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT))) - trace_syscall_exit(regs, regs->gprs[2]); + trace_sys_exit(regs, regs->gprs[2]); if (test_thread_flag(TIF_SYSCALL_TRACE)) tracehook_report_syscall_exit(regs, 0); diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c index 31e9b97..8d7d5c9 100644 --- a/arch/x86/kernel/ptrace.c +++ b/arch/x86/kernel/ptrace.c @@ -35,13 +35,11 @@ #include <asm/proto.h> #include <asm/ds.h> -#include <trace/syscall.h> - -DEFINE_TRACE_FN(syscall_enter, syscall_regfunc, syscall_unregfunc); -DEFINE_TRACE_FN(syscall_exit, syscall_regfunc, syscall_unregfunc); - #include "tls.h" +#define CREATE_TRACE_POINTS +#include <trace/events/syscalls.h> + enum x86_regset { REGSET_GENERAL, REGSET_FP, @@ -1501,7 +1499,7 @@ asmregparm long syscall_trace_enter(struct pt_regs *regs) ret = -1L; if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT))) - trace_syscall_enter(regs, regs->orig_ax); + trace_sys_enter(regs, regs->orig_ax); if (unlikely(current->audit_context)) { if (IS_IA32) @@ -1527,7 +1525,7 @@ asmregparm void syscall_trace_leave(struct pt_regs *regs) audit_syscall_exit(AUDITSC_RESULT(regs->ax), regs->ax); if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT))) - trace_syscall_exit(regs, regs->ax); + trace_sys_exit(regs, regs->ax); if (test_thread_flag(TIF_SYSCALL_TRACE)) tracehook_report_syscall_exit(regs, 0); -- cgit v1.1 From d8ed1d43e17898761c7221014a15a4c7501d2ff3 Mon Sep 17 00:00:00 2001 From: "David S. Miller" <davem@davemloft.net> Date: Tue, 25 Aug 2009 16:47:46 -0700 Subject: sparc64: Validate linear D-TLB misses. When page alloc debugging is not enabled, we essentially accept any virtual address for linear kernel TLB misses. But with kgdb, kernel address probing, and other facilities we can try to access arbitrary crap. So, make sure the address we miss on will translate to physical memory that actually exists. In order to make this work we have to embed the valid address bitmap into the kernel image. And in order to make that less expensive we make an adjustment, in that the max physical memory address is decreased to "1 << 41", even on the chips that support a 42-bit physical address space. We can do this because bit 41 indicates "I/O space" and thus covers non-memory ranges. The result of this is that: 1) kpte_linear_bitmap shrinks from 2K to 1K in size 2) we need 64K more for the valid address bitmap We can't let the valid address bitmap be dynamically allocated once we start using it to validate TLB misses, otherwise we have crazy issues to deal with wrt. recursive TLB misses and such. If we're in a TLB miss it could be the deepest trap level that's legal inside of the cpu. So if we TLB miss referencing the bitmap, the cpu will be out of trap levels and enter RED state. To guard against out-of-range accesses to the bitmap, we have to check to make sure no bits in the physical address above bit 40 are set. We could export and use last_valid_pfn for this check, but that's just an unnecessary extra memory reference. On the plus side of all this, since we load all of these translations into the special 4MB mapping TSB, and we check the TSB first for TLB misses, there should be absolutely no real cost for these new checks in the TLB miss path. Reported-by: heyongli@gmail.com Signed-off-by: David S. Miller <davem@davemloft.net> --- arch/sparc/include/asm/pgtable_64.h | 12 ++++++++--- arch/sparc/kernel/ktlb.S | 42 ++++++++++++++++++++++++++++++++---- arch/sparc/mm/init_64.c | 43 +++++++++++++++++++++---------------- arch/sparc/mm/init_64.h | 7 ++++-- 4 files changed, 76 insertions(+), 28 deletions(-) (limited to 'arch') diff --git a/arch/sparc/include/asm/pgtable_64.h b/arch/sparc/include/asm/pgtable_64.h index b049abf..0ff92fa 100644 --- a/arch/sparc/include/asm/pgtable_64.h +++ b/arch/sparc/include/asm/pgtable_64.h @@ -726,11 +726,17 @@ extern unsigned long pte_file(pte_t); extern pte_t pgoff_to_pte(unsigned long); #define PTE_FILE_MAX_BITS (64UL - PAGE_SHIFT - 1UL) -extern unsigned long *sparc64_valid_addr_bitmap; +extern unsigned long sparc64_valid_addr_bitmap[]; /* Needs to be defined here and not in linux/mm.h, as it is arch dependent */ -#define kern_addr_valid(addr) \ - (test_bit(__pa((unsigned long)(addr))>>22, sparc64_valid_addr_bitmap)) +static inline bool kern_addr_valid(unsigned long addr) +{ + unsigned long paddr = __pa(addr); + + if ((paddr >> 41UL) != 0UL) + return false; + return test_bit(paddr >> 22, sparc64_valid_addr_bitmap); +} extern int page_in_phys_avail(unsigned long paddr); diff --git a/arch/sparc/kernel/ktlb.S b/arch/sparc/kernel/ktlb.S index cef8def..3ea6e8c 100644 --- a/arch/sparc/kernel/ktlb.S +++ b/arch/sparc/kernel/ktlb.S @@ -151,12 +151,46 @@ kvmap_dtlb_4v: * Must preserve %g1 and %g6 (TAG). */ kvmap_dtlb_tsb4m_miss: - sethi %hi(kpte_linear_bitmap), %g2 - or %g2, %lo(kpte_linear_bitmap), %g2 + /* Clear the PAGE_OFFSET top virtual bits, shift + * down to get PFN, and make sure PFN is in range. + */ + sllx %g4, 21, %g5 - /* Clear the PAGE_OFFSET top virtual bits, then shift - * down to get a 256MB physical address index. + /* Check to see if we know about valid memory at the 4MB + * chunk this physical address will reside within. */ + srlx %g5, 21 + 41, %g2 + brnz,pn %g2, kvmap_dtlb_longpath + nop + + /* This unconditional branch and delay-slot nop gets patched + * by the sethi sequence once the bitmap is properly setup. + */ + .globl valid_addr_bitmap_insn +valid_addr_bitmap_insn: + ba,pt %xcc, 2f + nop + .subsection 2 + .globl valid_addr_bitmap_patch +valid_addr_bitmap_patch: + sethi %hi(sparc64_valid_addr_bitmap), %g7 + or %g7, %lo(sparc64_valid_addr_bitmap), %g7 + .previous + + srlx %g5, 21 + 22, %g2 + srlx %g2, 6, %g5 + and %g2, 63, %g2 + sllx %g5, 3, %g5 + ldx [%g7 + %g5], %g5 + mov 1, %g7 + sllx %g7, %g2, %g7 + andcc %g5, %g7, %g0 + be,pn %xcc, kvmap_dtlb_longpath + +2: sethi %hi(kpte_linear_bitmap), %g2 + or %g2, %lo(kpte_linear_bitmap), %g2 + + /* Get the 256MB physical address index. */ sllx %g4, 21, %g5 mov 1, %g7 srlx %g5, 21 + 28, %g5 diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c index ed6be6b..a70a5e1 100644 --- a/arch/sparc/mm/init_64.c +++ b/arch/sparc/mm/init_64.c @@ -145,7 +145,8 @@ static void __init read_obp_memory(const char *property, cmp_p64, NULL); } -unsigned long *sparc64_valid_addr_bitmap __read_mostly; +unsigned long sparc64_valid_addr_bitmap[VALID_ADDR_BITMAP_BYTES / + sizeof(unsigned long)]; EXPORT_SYMBOL(sparc64_valid_addr_bitmap); /* Kernel physical address base and size in bytes. */ @@ -1874,7 +1875,7 @@ static int pavail_rescan_ents __initdata; * memory list again, and make sure it provides at least as much * memory as 'pavail' does. */ -static void __init setup_valid_addr_bitmap_from_pavail(void) +static void __init setup_valid_addr_bitmap_from_pavail(unsigned long *bitmap) { int i; @@ -1897,8 +1898,7 @@ static void __init setup_valid_addr_bitmap_from_pavail(void) if (new_start <= old_start && new_end >= (old_start + PAGE_SIZE)) { - set_bit(old_start >> 22, - sparc64_valid_addr_bitmap); + set_bit(old_start >> 22, bitmap); goto do_next_page; } } @@ -1919,20 +1919,21 @@ static void __init setup_valid_addr_bitmap_from_pavail(void) } } +static void __init patch_tlb_miss_handler_bitmap(void) +{ + extern unsigned int valid_addr_bitmap_insn[]; + extern unsigned int valid_addr_bitmap_patch[]; + + valid_addr_bitmap_insn[1] = valid_addr_bitmap_patch[1]; + mb(); + valid_addr_bitmap_insn[0] = valid_addr_bitmap_patch[0]; + flushi(&valid_addr_bitmap_insn[0]); +} + void __init mem_init(void) { unsigned long codepages, datapages, initpages; unsigned long addr, last; - int i; - - i = last_valid_pfn >> ((22 - PAGE_SHIFT) + 6); - i += 1; - sparc64_valid_addr_bitmap = (unsigned long *) alloc_bootmem(i << 3); - if (sparc64_valid_addr_bitmap == NULL) { - prom_printf("mem_init: Cannot alloc valid_addr_bitmap.\n"); - prom_halt(); - } - memset(sparc64_valid_addr_bitmap, 0, i << 3); addr = PAGE_OFFSET + kern_base; last = PAGE_ALIGN(kern_size) + addr; @@ -1941,15 +1942,19 @@ void __init mem_init(void) addr += PAGE_SIZE; } - setup_valid_addr_bitmap_from_pavail(); + setup_valid_addr_bitmap_from_pavail(sparc64_valid_addr_bitmap); + patch_tlb_miss_handler_bitmap(); high_memory = __va(last_valid_pfn << PAGE_SHIFT); #ifdef CONFIG_NEED_MULTIPLE_NODES - for_each_online_node(i) { - if (NODE_DATA(i)->node_spanned_pages != 0) { - totalram_pages += - free_all_bootmem_node(NODE_DATA(i)); + { + int i; + for_each_online_node(i) { + if (NODE_DATA(i)->node_spanned_pages != 0) { + totalram_pages += + free_all_bootmem_node(NODE_DATA(i)); + } } } #else diff --git a/arch/sparc/mm/init_64.h b/arch/sparc/mm/init_64.h index 1606387..c2f772d 100644 --- a/arch/sparc/mm/init_64.h +++ b/arch/sparc/mm/init_64.h @@ -5,10 +5,13 @@ * marked non-static so that assembler code can get at them. */ -#define MAX_PHYS_ADDRESS (1UL << 42UL) -#define KPTE_BITMAP_CHUNK_SZ (256UL * 1024UL * 1024UL) +#define MAX_PHYS_ADDRESS (1UL << 41UL) +#define KPTE_BITMAP_CHUNK_SZ (256UL * 1024UL * 1024UL) #define KPTE_BITMAP_BYTES \ ((MAX_PHYS_ADDRESS / KPTE_BITMAP_CHUNK_SZ) / 8) +#define VALID_ADDR_BITMAP_CHUNK_SZ (4UL * 1024UL * 1024UL) +#define VALID_ADDR_BITMAP_BYTES \ + ((MAX_PHYS_ADDRESS / VALID_ADDR_BITMAP_CHUNK_SZ) / 8) extern unsigned long kern_linear_pte_xor[2]; extern unsigned long kpte_linear_bitmap[KPTE_BITMAP_BYTES / sizeof(unsigned long)]; -- cgit v1.1 From d560bc61575efae43595cbcb56d0ba3b9450139c Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge <jeremy@goop.org> Date: Tue, 25 Aug 2009 12:53:02 -0700 Subject: x86, xen: Suppress WP test on Xen Xen always runs on CPUs which properly support WP enforcement in privileged mode, so there's no need to test for it. This also works around a crash reported by Arnd Hannemann, though I think its just a band-aid for that case. Reported-by: Arnd Hannemann <hannemann@nets.rwth-aachen.de> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: H. Peter Anvin <hpa@zytor.com> --- arch/x86/xen/enlighten.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index e90540a..0b755cd 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -1059,6 +1059,7 @@ asmlinkage void __init xen_start_kernel(void) /* set up basic CPUID stuff */ cpu_detect(&new_cpu_data); new_cpu_data.hard_math = 1; + new_cpu_data.wp_works_ok = 1; new_cpu_data.x86_capability[0] = cpuid_edx(1); #endif -- cgit v1.1 From 7adb4df410966dfe43e4815256e3215110648fb8 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" <hpa@zytor.com> Date: Tue, 25 Aug 2009 21:06:03 -0700 Subject: x86, xen: Initialize cx to suppress warning Initialize cx before calling xen_cpuid(), in order to suppress the "may be used uninitialized in this function" warning. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> --- arch/x86/xen/enlighten.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 0b755cd..eb33aaa 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -215,6 +215,7 @@ static __init void xen_init_cpuid_mask(void) (1 << X86_FEATURE_ACPI)); /* disable ACPI */ ax = 1; + cx = 0; xen_cpuid(&ax, &bx, &cx, &dx); /* cpuid claims we support xsave; try enabling it to see what happens */ -- cgit v1.1 From 295594e9cf6ae2efd73371777aa8feba0f87f42f Mon Sep 17 00:00:00 2001 From: Yinghai Lu <yinghai@kernel.org> Date: Tue, 25 Aug 2009 13:44:44 -0700 Subject: x86: Fix vSMP boot crash 2.6.31-rc7 does not boot on vSMP systems: [ 8.501108] CPU31: Thermal monitoring enabled (TM1) [ 8.501127] CPU 31 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 [ 8.650254] CPU31: Intel(R) Xeon(R) CPU E5540 @ 2.53GHz stepping 04 [ 8.710324] Brought up 32 CPUs [ 8.713916] Total of 32 processors activated (162314.96 BogoMIPS). [ 8.721489] ERROR: parent span is not a superset of domain->span [ 8.727686] ERROR: domain->groups does not contain CPU0 [ 8.733091] ERROR: groups don't span domain->span [ 8.737975] ERROR: domain->cpu_power not set [ 8.742416] Ravikiran Thirumalai bisected it to: | commit 2759c3287de27266e06f1f4e82cbd2d65f6a044c | x86: don't call read_apic_id if !cpu_has_apic The problem is that on vSMP systems the CPUID derived initial-APICIDs are overlapping - so we need to fall back on hard_smp_processor_id() which reads the local APIC. Both come from the hardware (influenced by firmware though) so it's a tough call which one to trust. Doing the quirk expresses the vSMP property properly and also does not affect other systems, so we go for this solution instead of a revert. Reported-and-Tested-by: Ravikiran Thirumalai <kiran@scalex86.org> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Shai Fultheim <shai@scalex86.org> Cc: Suresh Siddha <suresh.b.siddha@intel.com> LKML-Reference: <4A944D3C.5030100@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/kernel/apic/probe_64.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/apic/probe_64.c b/arch/x86/kernel/apic/probe_64.c index bc3e880..fcec2f1 100644 --- a/arch/x86/kernel/apic/probe_64.c +++ b/arch/x86/kernel/apic/probe_64.c @@ -44,6 +44,11 @@ static struct apic *apic_probe[] __initdata = { NULL, }; +static int apicid_phys_pkg_id(int initial_apic_id, int index_msb) +{ + return hard_smp_processor_id() >> index_msb; +} + /* * Check the APIC IDs in bios_cpu_apicid and choose the APIC mode. */ @@ -69,6 +74,11 @@ void __init default_setup_apic_routing(void) printk(KERN_INFO "Setting APIC routing to %s\n", apic->name); } + if (is_vsmp_box()) { + /* need to update phys_pkg_id */ + apic->phys_pkg_id = apicid_phys_pkg_id; + } + /* * Now that apic routing model is selected, configure the * fault handling for intr remapping. -- cgit v1.1 From 7515bf59f87f19b2a17972b74230d2f91756fe3c Mon Sep 17 00:00:00 2001 From: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Date: Tue, 25 Aug 2009 14:31:11 +0200 Subject: tracing: Add syscall tracepoints - s390 arch update This patch includes s390 arch updates to synchronize with latest core changes in the syscalls tracing area. - tracing: Map syscall name to number (syscall_name_to_nr()) - tracing: Call arch_init_ftrace_syscalls at boot - tracing: add support tracepoint ids (set_syscall_{enter,exit}_id()) Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Martin Bligh <mbligh@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> LKML-Reference: <20090825123111.GD4639@cetus.boeblingen.de.ibm.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> --- arch/s390/kernel/ftrace.c | 36 +++++++++++++++++++++++++++--------- 1 file changed, 27 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/s390/kernel/ftrace.c b/arch/s390/kernel/ftrace.c index 3e298e6..57bdcb1 100644 --- a/arch/s390/kernel/ftrace.c +++ b/arch/s390/kernel/ftrace.c @@ -220,6 +220,29 @@ struct syscall_metadata *syscall_nr_to_meta(int nr) return syscalls_metadata[nr]; } +int syscall_name_to_nr(char *name) +{ + int i; + + if (!syscalls_metadata) + return -1; + for (i = 0; i < NR_syscalls; i++) + if (syscalls_metadata[i]) + if (!strcmp(syscalls_metadata[i]->name, name)) + return i; + return -1; +} + +void set_syscall_enter_id(int num, int id) +{ + syscalls_metadata[num]->enter_id = id; +} + +void set_syscall_exit_id(int num, int id) +{ + syscalls_metadata[num]->exit_id = id; +} + static struct syscall_metadata *find_syscall_meta(unsigned long syscall) { struct syscall_metadata *start; @@ -237,24 +260,19 @@ static struct syscall_metadata *find_syscall_meta(unsigned long syscall) return NULL; } -void arch_init_ftrace_syscalls(void) +static int __init arch_init_ftrace_syscalls(void) { struct syscall_metadata *meta; int i; - static atomic_t refs; - - if (atomic_inc_return(&refs) != 1) - goto out; syscalls_metadata = kzalloc(sizeof(*syscalls_metadata) * NR_syscalls, GFP_KERNEL); if (!syscalls_metadata) - goto out; + return -ENOMEM; for (i = 0; i < NR_syscalls; i++) { meta = find_syscall_meta((unsigned long)sys_call_table[i]); syscalls_metadata[i] = meta; } - return; -out: - atomic_dec(&refs); + return 0; } +arch_initcall(arch_init_ftrace_syscalls); #endif -- cgit v1.1 From dd86dda24cc1dc70031a7d9250dc3c0c430a50e2 Mon Sep 17 00:00:00 2001 From: Jason Baron <jbaron@redhat.com> Date: Mon, 24 Aug 2009 17:40:14 -0400 Subject: tracing: Define NR_syscalls for x86 (32) Add a NR_syscalls #define for x86. This is used in the syscall events tracing code. Todo: make it dynamic like x86_64. NR_syscalls is the usual name used to determine the number of syscalls supported by the current arch. We want to unify the use of this number across archs that support the syscall tracing. This also prepare to move some of the arch code to core code in the syscall tracing area. Signed-off-by: Jason Baron <jbaron@redhat.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Martin Bligh <mbligh@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Josh Stone <jistone@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: H. Peter Anwin <hpa@zytor.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> LKML-Reference: <0f33c0f96d198fccc3ddd9ff7f5334ff5cb42706.1251146513.git.jbaron@redhat.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> --- arch/x86/include/asm/unistd_32.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/x86/include/asm/unistd_32.h b/arch/x86/include/asm/unistd_32.h index 732a3070..8deaada 100644 --- a/arch/x86/include/asm/unistd_32.h +++ b/arch/x86/include/asm/unistd_32.h @@ -345,6 +345,8 @@ #ifdef __KERNEL__ +#define NR_syscalls 337 + #define __ARCH_WANT_IPC_PARSE_VERSION #define __ARCH_WANT_OLD_READDIR #define __ARCH_WANT_OLD_STAT -- cgit v1.1 From a5a2f8e2acb991327952c45a13f5441fc09dffd6 Mon Sep 17 00:00:00 2001 From: Jason Baron <jbaron@redhat.com> Date: Wed, 26 Aug 2009 12:09:10 -0400 Subject: tracing: Define NR_syscalls for x86_64 Express the available number of syscalls in a standard way by defining NR_syscalls. The common way to define it is to place its definition in asm/unistd.h However, the number of syscalls is defined using __NR_syscall_max in x86-64 after building a dynamic header file "asm-offsets.h" The source file that generates this header, asm-offsets-64.c includes unistd.h, then if we want to express NR_syscalls from __NR_syscall_max in unistd.h only after generating the dynamic header file, we need a watchguard. If unistd.h is included from asm-offsets-64.c, then we are generating asm-offset.h which defines __NR_syscall_max. At this time, we don't want to (we can't) define NR_syscalls, then we do nothing. Otherwise we define NR_syscalls because we know asm-offsets.h has been generated. Signed-off-by: Jason Baron <jbaron@redhat.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Martin Bligh <mbligh@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Josh Stone <jistone@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: H. Peter Anwin <hpa@zytor.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> LKML-Reference: <20090826160910.GB2658@redhat.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> --- arch/x86/include/asm/unistd_64.h | 6 ++++++ arch/x86/kernel/asm-offsets_64.c | 1 + 2 files changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/x86/include/asm/unistd_64.h b/arch/x86/include/asm/unistd_64.h index 900e161..b9f3c60 100644 --- a/arch/x86/include/asm/unistd_64.h +++ b/arch/x86/include/asm/unistd_64.h @@ -688,6 +688,12 @@ __SYSCALL(__NR_perf_counter_open, sys_perf_counter_open) #endif /* __NO_STUBS */ #ifdef __KERNEL__ + +#ifndef COMPILE_OFFSETS +#include <asm/asm-offsets.h> +#define NR_syscalls (__NR_syscall_max + 1) +#endif + /* * "Conditional" syscalls * diff --git a/arch/x86/kernel/asm-offsets_64.c b/arch/x86/kernel/asm-offsets_64.c index 898ecc4..4a6aeed 100644 --- a/arch/x86/kernel/asm-offsets_64.c +++ b/arch/x86/kernel/asm-offsets_64.c @@ -3,6 +3,7 @@ * This code generates raw asm output which is post-processed to extract * and format the required data. */ +#define COMPILE_OFFSETS #include <linux/crypto.h> #include <linux/sched.h> -- cgit v1.1 From 57421dbbdc932d65f0e6a41ebb027a2bfe3d0669 Mon Sep 17 00:00:00 2001 From: Jason Baron <jbaron@redhat.com> Date: Mon, 24 Aug 2009 17:40:22 -0400 Subject: tracing: Convert event tracing code to use NR_syscalls Convert the syscalls event tracing code to use NR_syscalls, instead of FTRACE_SYSCALL_MAX. NR_syscalls is standard accross most arches, and reduces code confusion/complexity. Signed-off-by: Jason Baron <jbaron@redhat.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Martin Bligh <mbligh@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Josh Stone <jistone@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: H. Peter Anwin <hpa@zytor.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> LKML-Reference: <9b4f1a84ecae57cc6599412772efa36f0d2b815b.1251146513.git.jbaron@redhat.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> --- arch/x86/kernel/ftrace.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c index 3cff121..9dbb527 100644 --- a/arch/x86/kernel/ftrace.c +++ b/arch/x86/kernel/ftrace.c @@ -494,7 +494,7 @@ static struct syscall_metadata *find_syscall_meta(unsigned long *syscall) struct syscall_metadata *syscall_nr_to_meta(int nr) { - if (!syscalls_metadata || nr >= FTRACE_SYSCALL_MAX || nr < 0) + if (!syscalls_metadata || nr >= NR_syscalls || nr < 0) return NULL; return syscalls_metadata[nr]; @@ -507,7 +507,7 @@ int syscall_name_to_nr(char *name) if (!syscalls_metadata) return -1; - for (i = 0; i < FTRACE_SYSCALL_MAX; i++) { + for (i = 0; i < NR_syscalls; i++) { if (syscalls_metadata[i]) { if (!strcmp(syscalls_metadata[i]->name, name)) return i; @@ -533,13 +533,13 @@ static int __init arch_init_ftrace_syscalls(void) unsigned long **psys_syscall_table = &sys_call_table; syscalls_metadata = kzalloc(sizeof(*syscalls_metadata) * - FTRACE_SYSCALL_MAX, GFP_KERNEL); + NR_syscalls, GFP_KERNEL); if (!syscalls_metadata) { WARN_ON(1); return -ENOMEM; } - for (i = 0; i < FTRACE_SYSCALL_MAX; i++) { + for (i = 0; i < NR_syscalls; i++) { meta = find_syscall_meta(psys_syscall_table[i]); syscalls_metadata[i] = meta; } -- cgit v1.1 From 117226d15850387b55fd01675917ee4fcb9699e8 Mon Sep 17 00:00:00 2001 From: Jason Baron <jbaron@redhat.com> Date: Mon, 24 Aug 2009 17:40:26 -0400 Subject: tracing: Remove FTRACE_SYSCALL_MAX definitions Remove the FTRACE_SYSCALL_MAX definitions now that we have converted the syscall event tracing code to use NR_syscalls. Signed-off-by: Jason Baron <jbaron@redhat.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Martin Bligh <mbligh@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Josh Stone <jistone@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: H. Peter Anwin <hpa@zytor.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> LKML-Reference: <f2240cdc8f0b1ca7617390c8f5ec90ba2bd348cf.1251146513.git.jbaron@redhat.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> --- arch/x86/include/asm/ftrace.h | 7 ------- 1 file changed, 7 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/ftrace.h b/arch/x86/include/asm/ftrace.h index 7113654..db24c22 100644 --- a/arch/x86/include/asm/ftrace.h +++ b/arch/x86/include/asm/ftrace.h @@ -28,13 +28,6 @@ #endif -/* FIXME: I don't want to stay hardcoded */ -#ifdef CONFIG_X86_64 -# define FTRACE_SYSCALL_MAX 299 -#else -# define FTRACE_SYSCALL_MAX 337 -#endif - #ifdef CONFIG_FUNCTION_TRACER #define MCOUNT_ADDR ((long)(mcount)) #define MCOUNT_INSN_SIZE 5 /* sizeof mcount call */ -- cgit v1.1 From dd9b3e84f2095ed19582f4df5d20e1e40c01ca3c Mon Sep 17 00:00:00 2001 From: Roel Kluin <roel.kluin@gmail.com> Date: Wed, 17 Jun 2009 13:13:57 -0700 Subject: m68k: cnt reaches -1, not 0 With the postfix decrement cnt reaches -1 rather than 0. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> --- arch/m68k/amiga/config.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/m68k/amiga/config.c b/arch/m68k/amiga/config.c index 6e56275..6c74751 100644 --- a/arch/m68k/amiga/config.c +++ b/arch/m68k/amiga/config.c @@ -574,10 +574,11 @@ static int a2000_hwclk(int op, struct rtc_time *t) tod_2000.cntrl1 = TOD2000_CNTRL1_HOLD; - while ((tod_2000.cntrl1 & TOD2000_CNTRL1_BUSY) && cnt--) { + while ((tod_2000.cntrl1 & TOD2000_CNTRL1_BUSY) && cnt) { tod_2000.cntrl1 &= ~TOD2000_CNTRL1_HOLD; udelay(70); tod_2000.cntrl1 |= TOD2000_CNTRL1_HOLD; + --cnt; } if (!cnt) @@ -649,10 +650,11 @@ static int amiga_set_clock_mmss(unsigned long nowtime) tod_2000.cntrl1 |= TOD2000_CNTRL1_HOLD; - while ((tod_2000.cntrl1 & TOD2000_CNTRL1_BUSY) && cnt--) { + while ((tod_2000.cntrl1 & TOD2000_CNTRL1_BUSY) && cnt) { tod_2000.cntrl1 &= ~TOD2000_CNTRL1_HOLD; udelay(70); tod_2000.cntrl1 |= TOD2000_CNTRL1_HOLD; + --cnt; } if (!cnt) -- cgit v1.1 From dc71c7d5dbd8cd8bb6e3b548ddc0454b64ded5f8 Mon Sep 17 00:00:00 2001 From: Andrew Morton <akpm@linux-foundation.org> Date: Wed, 17 Jun 2009 13:13:58 -0700 Subject: arch/m68k/include/asm/motorola_pgalloc.h: fix kunmap arg arch/m68k/include/asm/motorola_pgalloc.h: In function 'pte_alloc_one': arch/m68k/include/asm/motorola_pgalloc.h:44: warning: passing argument 1 of 'kunmap' from incompatible pointer type Also, remove unneeded test for kmap() failure. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> --- arch/m68k/include/asm/motorola_pgalloc.h | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/m68k/include/asm/motorola_pgalloc.h b/arch/m68k/include/asm/motorola_pgalloc.h index 15ee4c7..2f02f26 100644 --- a/arch/m68k/include/asm/motorola_pgalloc.h +++ b/arch/m68k/include/asm/motorola_pgalloc.h @@ -36,12 +36,10 @@ static inline pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long addres return NULL; pte = kmap(page); - if (pte) { - __flush_page_to_ram(pte); - flush_tlb_kernel_page(pte); - nocache_page(pte); - } - kunmap(pte); + __flush_page_to_ram(pte); + flush_tlb_kernel_page(pte); + nocache_page(pte); + kunmap(page); pgtable_page_ctor(page); return page; } -- cgit v1.1 From 9fd926b4ab1e38ac5e3eb3ba0afb56726d90aa88 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan <adobriyan@gmail.com> Date: Thu, 9 Jul 2009 17:08:38 +0400 Subject: m68k: Fix redefinition of pgprot_noncached arch/m68k/include/asm/pgtable_mm.h:148:1: warning: "pgprot_noncached" redefined In file included from arch/m68k/include/asm/pgtable_mm.h:138, from arch/m68k/include/asm/pgtable.h:4, from include/linux/mm.h:40, from include/linux/pagemap.h:7, from include/linux/blkdev.h:12, from arch/m68k/emu/nfblock.c:17: include/asm-generic/pgtable.h:133:1: warning: this is the location of the previous definition pgprot_noncached() should be defined _before_ including asm-generic/pgtable.h Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> --- arch/m68k/include/asm/pgtable_mm.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/m68k/include/asm/pgtable_mm.h b/arch/m68k/include/asm/pgtable_mm.h index 0b604f0..fe60e1a 100644 --- a/arch/m68k/include/asm/pgtable_mm.h +++ b/arch/m68k/include/asm/pgtable_mm.h @@ -135,8 +135,6 @@ static inline void update_mmu_cache(struct vm_area_struct *vma, #endif #ifndef __ASSEMBLY__ -#include <asm-generic/pgtable.h> - /* * Macro to mark a page protection value as "uncacheable". */ @@ -154,6 +152,7 @@ static inline void update_mmu_cache(struct vm_area_struct *vma, ? (__pgprot((pgprot_val(prot) & _CACHEMASK040) | _PAGE_NOCACHE_S)) \ : (prot))) +#include <asm-generic/pgtable.h> #endif /* !__ASSEMBLY__ */ /* -- cgit v1.1 From 9848484fad9ddeb18f18f02f9ecdcd330ac9a216 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven <geert@linux-m68k.org> Date: Fri, 21 Aug 2009 22:03:54 +0200 Subject: m68k,m68knommu: Wire up rt_tgsigqueueinfo and perf_counter_open Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Greg Ungerer <gerg@uclinux.org> --- arch/m68k/include/asm/unistd.h | 4 +++- arch/m68k/kernel/entry.S | 2 ++ arch/m68knommu/kernel/syscalltable.S | 2 ++ 3 files changed, 7 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/m68k/include/asm/unistd.h b/arch/m68k/include/asm/unistd.h index aa29a86..946d869 100644 --- a/arch/m68k/include/asm/unistd.h +++ b/arch/m68k/include/asm/unistd.h @@ -334,10 +334,12 @@ #define __NR_inotify_init1 328 #define __NR_preadv 329 #define __NR_pwritev 330 +#define __NR_rt_tgsigqueueinfo 331 +#define __NR_perf_counter_open 332 #ifdef __KERNEL__ -#define NR_syscalls 331 +#define NR_syscalls 333 #define __ARCH_WANT_IPC_PARSE_VERSION #define __ARCH_WANT_OLD_READDIR diff --git a/arch/m68k/kernel/entry.S b/arch/m68k/kernel/entry.S index 8744f60..c3735cd 100644 --- a/arch/m68k/kernel/entry.S +++ b/arch/m68k/kernel/entry.S @@ -755,4 +755,6 @@ sys_call_table: .long sys_inotify_init1 .long sys_preadv .long sys_pwritev /* 330 */ + .long sys_rt_tgsigqueueinfo + .long sys_perf_counter_open diff --git a/arch/m68knommu/kernel/syscalltable.S b/arch/m68knommu/kernel/syscalltable.S index c0b8782..0ae123e 100644 --- a/arch/m68knommu/kernel/syscalltable.S +++ b/arch/m68knommu/kernel/syscalltable.S @@ -349,6 +349,8 @@ ENTRY(sys_call_table) .long sys_inotify_init1 .long sys_preadv .long sys_pwritev /* 330 */ + .long sys_rt_tgsigqueueinfo + .long sys_perf_counter_open .rept NR_syscalls-(.-sys_call_table)/4 .long sys_ni_syscall -- cgit v1.1 From 7b6a09f3d6aedeaac923824af2a5df30300b56e9 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Date: Sun, 23 Aug 2009 22:54:32 +0000 Subject: powerpc/ps3: Add missing check for PS3 to rtc-ps3 platform device registration On non-PS3, we get: | kernel BUG at drivers/rtc/rtc-ps3.c:36! because the rtc-ps3 platform device is registered unconditionally in a kernel with builtin support for PS3. Reported-by: Sachin Sant <sachinp@in.ibm.com> Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> --- arch/powerpc/platforms/ps3/time.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/platforms/ps3/time.c b/arch/powerpc/platforms/ps3/time.c index b178a1e..40b5cb4 100644 --- a/arch/powerpc/platforms/ps3/time.c +++ b/arch/powerpc/platforms/ps3/time.c @@ -21,6 +21,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> +#include <asm/firmware.h> #include <asm/rtc.h> #include <asm/lv1call.h> #include <asm/ps3.h> @@ -84,6 +85,9 @@ static int __init ps3_rtc_init(void) { struct platform_device *pdev; + if (!firmware_has_feature(FW_FEATURE_PS3_LV1)) + return -ENODEV; + pdev = platform_device_register_simple("rtc-ps3", -1, NULL, 0); if (IS_ERR(pdev)) return PTR_ERR(pdev); -- cgit v1.1 From b080f187adb79bbcbe28814b07cbc1ead34c469a Mon Sep 17 00:00:00 2001 From: Geoff Levand <geoffrey.levand@am.sony.com> Date: Tue, 25 Aug 2009 07:53:35 +0000 Subject: powerpc/ps3: Update ps3_defconfig Update ps3_defconfig. o Refresh for 2.6.31. o Remove MTD support. o Add more HID drivers. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> --- arch/powerpc/configs/ps3_defconfig | 211 +++++++++++++------------------------ 1 file changed, 75 insertions(+), 136 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig index e28e65e..7de127e 100644 --- a/arch/powerpc/configs/ps3_defconfig +++ b/arch/powerpc/configs/ps3_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc5 -# Fri May 15 10:37:00 2009 +# Linux kernel version: 2.6.31-rc7 +# Mon Aug 24 17:38:50 2009 # CONFIG_PPC64=y # # Processor support # +CONFIG_PPC_BOOK3S_64=y CONFIG_PPC_BOOK3S=y # CONFIG_POWER4_ONLY is not set CONFIG_POWER3=y @@ -20,6 +21,7 @@ CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_64=y CONFIG_PPC_MM_SLICES=y CONFIG_VIRT_CPU_ACCOUNTING=y +CONFIG_PPC_HAVE_PMU_SUPPORT=y CONFIG_SMP=y CONFIG_NR_CPUS=2 CONFIG_64BIT=y @@ -31,6 +33,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y @@ -41,7 +44,6 @@ CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_ARCH_HAS_ILOG2_U64=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_PPC=y @@ -62,6 +64,7 @@ CONFIG_DTC=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -113,7 +116,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -126,7 +128,14 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_COMPAT_BRK is not set CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -145,6 +154,11 @@ CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_ATTRS=y CONFIG_USE_GENERIC_SMP_HELPERS=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -210,7 +224,7 @@ CONFIG_PPC_CELL=y # # Cell Broadband Engine options # -CONFIG_SPU_FS=y +CONFIG_SPU_FS=m CONFIG_SPU_FS_64K_LS=y # CONFIG_SPU_TRACE is not set CONFIG_SPU_BASE=y @@ -255,6 +269,7 @@ CONFIG_BINFMT_MISC=y CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y # CONFIG_IOMMU_VMERGE is not set CONFIG_IOMMU_HELPER=y +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -285,9 +300,9 @@ CONFIG_MIGRATION=y CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_ARCH_MEMORY_PROBE=y CONFIG_PPC_HAS_HASH_64K=y CONFIG_PPC_4K_PAGES=y @@ -399,6 +414,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -433,11 +449,14 @@ CONFIG_BT_HCIBTUSB=m CONFIG_WIRELESS=y CONFIG_CFG80211=m # CONFIG_CFG80211_REG_DEBUG is not set +# CONFIG_CFG80211_DEBUGFS is not set # CONFIG_WIRELESS_OLD_REGULATORY is not set CONFIG_WIRELESS_EXT=y # CONFIG_WIRELESS_EXT_SYSFS is not set # CONFIG_LIB80211 is not set CONFIG_MAC80211=m +CONFIG_MAC80211_DEFAULT_PS=y +CONFIG_MAC80211_DEFAULT_PS_VALUE=1 # # Rate control algorithm selection @@ -447,7 +466,6 @@ CONFIG_MAC80211_RC_PID=y CONFIG_MAC80211_RC_DEFAULT_PID=y # CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set CONFIG_MAC80211_RC_DEFAULT="pid" -# CONFIG_MAC80211_MESH is not set # CONFIG_MAC80211_LEDS is not set # CONFIG_MAC80211_DEBUGFS is not set # CONFIG_MAC80211_DEBUG_MENU is not set @@ -472,77 +490,7 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set -CONFIG_MTD=y -CONFIG_MTD_DEBUG=y -CONFIG_MTD_DEBUG_VERBOSE=0 -# CONFIG_MTD_CONCAT is not set -# CONFIG_MTD_PARTITIONS is not set -# CONFIG_MTD_TESTS is not set - -# -# User Modules And Translation Layers -# -# CONFIG_MTD_CHAR is not set -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set -# CONFIG_MTD_OOPS is not set - -# -# RAM/ROM/Flash chip drivers -# -# CONFIG_MTD_CFI is not set -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_NAND is not set -# CONFIG_MTD_ONENAND is not set - -# -# LPDDR flash memory drivers -# -# CONFIG_MTD_LPDDR is not set - -# -# UBI - Unsorted block images -# -# CONFIG_MTD_UBI is not set +# CONFIG_MTD is not set CONFIG_OF_DEVICE=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y @@ -590,10 +538,6 @@ CONFIG_BLK_DEV_SR=y # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=m # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -626,7 +570,6 @@ CONFIG_BLK_DEV_DM=m # CONFIG_DM_UEVENT is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -646,10 +589,11 @@ CONFIG_MII=m # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set CONFIG_NETDEV_1000=y CONFIG_GELIC_NET=y CONFIG_GELIC_WIRELESS=y -CONFIG_GELIC_WIRELESS_OLD_PSK_INTERFACE=y +# CONFIG_GELIC_WIRELESS_OLD_PSK_INTERFACE is not set # CONFIG_NETDEV_10000 is not set # @@ -669,8 +613,7 @@ CONFIG_WLAN_80211=y # CONFIG_HOSTAP is not set # CONFIG_B43 is not set # CONFIG_B43LEGACY is not set -CONFIG_ZD1211RW=m -# CONFIG_ZD1211RW_DEBUG is not set +# CONFIG_ZD1211RW is not set # CONFIG_RT2X00 is not set # @@ -682,7 +625,7 @@ CONFIG_ZD1211RW=m # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set -CONFIG_USB_PEGASUS=m +# CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set CONFIG_USB_USBNET=m CONFIG_USB_NET_AX8817X=m @@ -693,10 +636,11 @@ CONFIG_USB_NET_AX8817X=m # CONFIG_USB_NET_GL620A is not set # CONFIG_USB_NET_NET1080 is not set # CONFIG_USB_NET_PLUSB is not set -CONFIG_USB_NET_MCS7830=m +# CONFIG_USB_NET_MCS7830 is not set # CONFIG_USB_NET_RNDIS_HOST is not set # CONFIG_USB_NET_CDC_SUBSET is not set # CONFIG_USB_NET_ZAURUS is not set +# CONFIG_USB_NET_INT51X1 is not set # CONFIG_WAN is not set CONFIG_PPP=m CONFIG_PPP_MULTILINK=y @@ -771,8 +715,7 @@ CONFIG_DEVKMEM=y # CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=16 +# CONFIG_LEGACY_PTYS is not set # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set @@ -782,6 +725,11 @@ CONFIG_LEGACY_PTY_COUNT=16 # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -805,22 +753,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -898,6 +831,11 @@ CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set # CONFIG_SND_DRIVERS is not set CONFIG_SND_PPC=y CONFIG_SND_PS3=m @@ -930,29 +868,34 @@ CONFIG_USB_HIDDEV=y # Special HID drivers # # CONFIG_HID_A4TECH is not set -# CONFIG_HID_APPLE is not set -# CONFIG_HID_BELKIN is not set -# CONFIG_HID_CHERRY is not set +CONFIG_HID_APPLE=m +CONFIG_HID_BELKIN=m +CONFIG_HID_CHERRY=m # CONFIG_HID_CHICONY is not set # CONFIG_HID_CYPRESS is not set -# CONFIG_DRAGONRISE_FF is not set -# CONFIG_HID_EZKEY is not set +# CONFIG_HID_DRAGONRISE is not set +CONFIG_HID_EZKEY=m # CONFIG_HID_KYE is not set # CONFIG_HID_GYRATION is not set # CONFIG_HID_KENSINGTON is not set -# CONFIG_HID_LOGITECH is not set -# CONFIG_HID_MICROSOFT is not set +CONFIG_HID_LOGITECH=m +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=m # CONFIG_HID_MONTEREY is not set # CONFIG_HID_NTRIG is not set # CONFIG_HID_PANTHERLORD is not set # CONFIG_HID_PETALYNX is not set # CONFIG_HID_SAMSUNG is not set CONFIG_HID_SONY=m -# CONFIG_HID_SUNPLUS is not set -# CONFIG_GREENASIA_FF is not set +CONFIG_HID_SUNPLUS=m +# CONFIG_HID_GREENASIA is not set +CONFIG_HID_SMARTJOYPLUS=m +# CONFIG_SMARTJOYPLUS_FF is not set # CONFIG_HID_TOPSEED is not set -# CONFIG_THRUSTMASTER_FF is not set -# CONFIG_ZEROPLUS_FF is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_WACOM is not set +# CONFIG_HID_ZEROPLUS is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -988,6 +931,8 @@ CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=m +# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set +# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set # CONFIG_USB_OHCI_HCD_PPC_OF is not set # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y @@ -1115,6 +1060,10 @@ CONFIG_RTC_DRV_PS3=m # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1141,11 +1090,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1205,7 +1155,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1222,6 +1171,7 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set CONFIG_LOCKD=y @@ -1359,7 +1309,6 @@ CONFIG_DEBUG_MEMORY_INIT=y CONFIG_DEBUG_LIST=y # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set @@ -1374,31 +1323,21 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_RING_BUFFER=y +CONFIG_EVENT_TRACING=y +CONFIG_CONTEXT_SWITCH_TRACER=y CONFIG_TRACING=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_FTRACE is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 CONFIG_DEBUG_STACKOVERFLOW=y # CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_PPC_EMULATED_STATS is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set -- cgit v1.1 From 825e1e23914b9c3dbc49ee8c5a1d1cb421c1270a Mon Sep 17 00:00:00 2001 From: Grant Grundler <grundler@parisc-linux.org> Date: Fri, 28 Aug 2009 15:00:36 -0400 Subject: parisc: fix warning in traps.c On Tue, Aug 18, 2009 at 01:45:17PM -0400, John David Anglin wrote: > CC arch/parisc/kernel/traps.o > arch/parisc/kernel/traps.c: In function 'handle_interruption': > arch/parisc/kernel/traps.c:535:18: warning: operation on 'regs->iasq[0]' > may be undefined Yes - Line 535 should use both [0] and [1]. Reported-by: John David Anglin <dave@hiauly1.hia.nrc.ca> Signed-off-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> --- arch/parisc/kernel/traps.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c index 528f0ff..8b58bf0 100644 --- a/arch/parisc/kernel/traps.c +++ b/arch/parisc/kernel/traps.c @@ -532,7 +532,7 @@ void notrace handle_interruption(int code, struct pt_regs *regs) /* Kill the user process later */ regs->iaoq[0] = 0 | 3; regs->iaoq[1] = regs->iaoq[0] + 4; - regs->iasq[0] = regs->iasq[0] = regs->sr[7]; + regs->iasq[0] = regs->iasq[1] = regs->sr[7]; regs->gr[0] &= ~PSW_B; return; } -- cgit v1.1 From f2486f26692433ba27cc10991a085b503b0422a3 Mon Sep 17 00:00:00 2001 From: "Luck, Tony" <tony.luck@intel.com> Date: Mon, 31 Aug 2009 16:54:03 -0700 Subject: [IA64] Fix warning in dma-mapping.c arch/ia64/kernel/dma-mapping.c:14: warning: control reaches end of non-void function arch/ia64/kernel/dma-mapping.c:14: warning: no return statement in function returning non-void This warning was introduced by commit: 390bd132b2831a2ad0268e84bffbfc0680debfe5 Add dma_debug_init() for ia64 Signed-off-by: Tony Luck <tony.luck@intel.com> --- arch/ia64/kernel/dma-mapping.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/ia64/kernel/dma-mapping.c b/arch/ia64/kernel/dma-mapping.c index 39a3cd0..f2c1600 100644 --- a/arch/ia64/kernel/dma-mapping.c +++ b/arch/ia64/kernel/dma-mapping.c @@ -10,7 +10,9 @@ EXPORT_SYMBOL(dma_ops); static int __init dma_init(void) { - dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES); + dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES); + + return 0; } fs_initcall(dma_init); -- cgit v1.1 From 5afe18d2f58812f3924edbd215464e5e3e8545e7 Mon Sep 17 00:00:00 2001 From: Jiri Bohac <jbohac@suse.cz> Date: Wed, 2 Sep 2009 11:00:46 +0200 Subject: [IA64] fix csum_ipv6_magic() The 32-bit parameters (len and csum) of csum_ipv6_magic() are passed in 64-bit registers in2 and in4. The high order 32 bits of the registers were never cleared, and garbage was sometimes calculated into the checksum. Fix this by clearing the high order 32 bits of these registers. Signed-off-by: Jiri Bohac <jbohac@suse.cz> Signed-off-by: Tony Luck <tony.luck@intel.com> --- arch/ia64/lib/ip_fast_csum.S | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/ia64/lib/ip_fast_csum.S b/arch/ia64/lib/ip_fast_csum.S index 1f86aeb..620d9dc 100644 --- a/arch/ia64/lib/ip_fast_csum.S +++ b/arch/ia64/lib/ip_fast_csum.S @@ -96,20 +96,22 @@ END(ip_fast_csum) GLOBAL_ENTRY(csum_ipv6_magic) ld4 r20=[in0],4 ld4 r21=[in1],4 - dep r15=in3,in2,32,16 + zxt4 in2=in2 ;; ld4 r22=[in0],4 ld4 r23=[in1],4 - mux1 r15=r15,@rev + dep r15=in3,in2,32,16 ;; ld4 r24=[in0],4 ld4 r25=[in1],4 - shr.u r15=r15,16 + mux1 r15=r15,@rev add r16=r20,r21 add r17=r22,r23 + zxt4 in4=in4 ;; ld4 r26=[in0],4 ld4 r27=[in1],4 + shr.u r15=r15,16 add r18=r24,r25 add r8=r16,r17 ;; -- cgit v1.1 From a3df6f7d3090e611bcc774cd2cba45ae016d37e1 Mon Sep 17 00:00:00 2001 From: Paul Mackerras <paulus@samba.org> Date: Thu, 3 Sep 2009 11:52:02 +1000 Subject: perf_counter/powerpc: Fix cache event codes for POWER7 I had the codes for L1 D-cache load accesses and misses swapped around, and the wrong codes for LL-cache accesses and misses. This corrects them. Reported-by: Corey Ashford <cjashfor@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: <stable@kernel.org> LKML-Reference: <19103.8514.709300.585484@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/powerpc/kernel/power7-pmu.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/power7-pmu.c b/arch/powerpc/kernel/power7-pmu.c index 388cf57..018d094 100644 --- a/arch/powerpc/kernel/power7-pmu.c +++ b/arch/powerpc/kernel/power7-pmu.c @@ -317,7 +317,7 @@ static int power7_generic_events[] = { */ static int power7_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = { [C(L1D)] = { /* RESULT_ACCESS RESULT_MISS */ - [C(OP_READ)] = { 0x400f0, 0xc880 }, + [C(OP_READ)] = { 0xc880, 0x400f0 }, [C(OP_WRITE)] = { 0, 0x300f0 }, [C(OP_PREFETCH)] = { 0xd8b8, 0 }, }, @@ -327,8 +327,8 @@ static int power7_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = { [C(OP_PREFETCH)] = { 0x408a, 0 }, }, [C(LL)] = { /* RESULT_ACCESS RESULT_MISS */ - [C(OP_READ)] = { 0x6080, 0x6084 }, - [C(OP_WRITE)] = { 0x6082, 0x6086 }, + [C(OP_READ)] = { 0x16080, 0x26080 }, + [C(OP_WRITE)] = { 0x16082, 0x26082 }, [C(OP_PREFETCH)] = { 0, 0 }, }, [C(DTLB)] = { /* RESULT_ACCESS RESULT_MISS */ -- cgit v1.1 From e6617c6ec28a17cf2f90262b835ec05b9b861400 Mon Sep 17 00:00:00 2001 From: "David S. Miller" <davem@davemloft.net> Date: Thu, 3 Sep 2009 02:35:20 -0700 Subject: sparc64: Kill spurious NMI watchdog triggers by increasing limit to 30 seconds. This is a compromise and a temporary workaround for bootup NMI watchdog triggers some people see with qla2xxx devices present. This happens when, for example: CPU 0 is in the driver init and looping submitting mailbox commands to load the firmware, then waiting for completion. CPU 1 is receiving the device interrupts. CPU 1 is where the NMI watchdog triggers. CPU 0 is submitting mailbox commands fast enough that by the time CPU 1 returns from the device interrupt handler, a new one is pending. This sequence runs for more than 5 seconds. The problematic case is CPU 1's timer interrupt running when the barrage of device interrupts begin. Then we have: timer interrupt return for softirq checking pending, thus enable interrupts qla2xxx interrupt return qla2xxx interrupt return ... 5+ seconds pass final qla2xxx interrupt for fw load return run timer softirq return At some point in the multi-second qla2xxx interrupt storm we trigger the NMI watchdog on CPU 1 from the NMI interrupt handler. The timer softirq, once we get back to running it, is smart enough to run the timer work enough times to make up for the missed timer interrupts. However, the NMI watchdogs (both x86 and sparc) use the timer interrupt count to notice the cpu is wedged. But in the above scenerio we'll receive only one such timer interrupt even if we last all the way back to running the timer softirq. The default watchdog trigger point is only 5 seconds, which is pretty low (the softwatchdog triggers at 60 seconds). So increase it to 30 seconds for now. Signed-off-by: David S. Miller <davem@davemloft.net> --- arch/sparc/kernel/nmi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sparc/kernel/nmi.c b/arch/sparc/kernel/nmi.c index 2c0cc72..b75bf50 100644 --- a/arch/sparc/kernel/nmi.c +++ b/arch/sparc/kernel/nmi.c @@ -103,7 +103,7 @@ notrace __kprobes void perfctr_irq(int irq, struct pt_regs *regs) } if (!touched && __get_cpu_var(last_irq_sum) == sum) { local_inc(&__get_cpu_var(alert_counter)); - if (local_read(&__get_cpu_var(alert_counter)) == 5 * nmi_hz) + if (local_read(&__get_cpu_var(alert_counter)) == 30 * nmi_hz) die_nmi("BUG: NMI Watchdog detected LOCKUP", regs, panic_on_timeout); } else { -- cgit v1.1 From bd4352cadfacb9084c97c853b025fac010266c26 Mon Sep 17 00:00:00 2001 From: "David S. Miller" <davem@davemloft.net> Date: Fri, 4 Sep 2009 03:38:54 -0700 Subject: sparc64: Fix bootup with mcount in some configs. Functions invoked early when booting up a cpu can't use tracing because mcount requires a valid 'current_thread_info()' and TLB mappings to be setup. The code path of sun4v_register_mondo_queues --> register_one_mondo is one such case. sun4v_register_mondo_queues already has the necessary 'notrace' annotation, but register_one_mondo does not. Normally register_one_mondo is inlined so the bug doesn't trigger, but with some config/compiler combinations, it won't be so we must properly mark it notrace. While we're here, add 'notrace' annoations to prom_printf and prom_halt so that early error handling won't have the same problem. Reported-by: Alexander Beregalov <a.beregalov@gmail.com> Reported-by: Leif Sawyer <lsawyer@gci.com> Signed-off-by: David S. Miller <davem@davemloft.net> --- arch/sparc/kernel/irq_64.c | 2 +- arch/sparc/prom/misc_64.c | 2 +- arch/sparc/prom/printf.c | 7 +++---- 3 files changed, 5 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/sparc/kernel/irq_64.c b/arch/sparc/kernel/irq_64.c index f0ee790..8daab33 100644 --- a/arch/sparc/kernel/irq_64.c +++ b/arch/sparc/kernel/irq_64.c @@ -886,7 +886,7 @@ void notrace init_irqwork_curcpu(void) * Therefore you cannot make any OBP calls, not even prom_printf, * from these two routines. */ -static void __cpuinit register_one_mondo(unsigned long paddr, unsigned long type, unsigned long qmask) +static void __cpuinit notrace register_one_mondo(unsigned long paddr, unsigned long type, unsigned long qmask) { unsigned long num_entries = (qmask + 1) / 64; unsigned long status; diff --git a/arch/sparc/prom/misc_64.c b/arch/sparc/prom/misc_64.c index eedffb4..39fc6af 100644 --- a/arch/sparc/prom/misc_64.c +++ b/arch/sparc/prom/misc_64.c @@ -88,7 +88,7 @@ void prom_cmdline(void) /* Drop into the prom, but completely terminate the program. * No chance of continuing. */ -void prom_halt(void) +void notrace prom_halt(void) { #ifdef CONFIG_SUN_LDOMS if (ldom_domaining_enabled) diff --git a/arch/sparc/prom/printf.c b/arch/sparc/prom/printf.c index 660943e..ca86926 100644 --- a/arch/sparc/prom/printf.c +++ b/arch/sparc/prom/printf.c @@ -14,14 +14,14 @@ */ #include <linux/kernel.h> +#include <linux/compiler.h> #include <asm/openprom.h> #include <asm/oplib.h> static char ppbuf[1024]; -void -prom_write(const char *buf, unsigned int n) +void notrace prom_write(const char *buf, unsigned int n) { char ch; @@ -33,8 +33,7 @@ prom_write(const char *buf, unsigned int n) } } -void -prom_printf(const char *fmt, ...) +void notrace prom_printf(const char *fmt, ...) { va_list args; int i; -- cgit v1.1 From 74a01180db4bbfd61304ae0ba1f60af55ffc803d Mon Sep 17 00:00:00 2001 From: Roderick Colenbrander <thunderbird2k@gmail.com> Date: Thu, 3 Sep 2009 09:57:23 -0600 Subject: powerpc: Fix i8259 interrupt driver kernel crash on ML510 This patch fixes a null pointer exception caused by removal of 'ack()' for level interrupts in the Xilinx interrupt driver. A recent change to the xilinx interrupt controller removed the ack hook for level irqs. Signed-off-by: Roderick Colenbrander <thunderbird2k@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> --- arch/powerpc/sysdev/xilinx_intc.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/sysdev/xilinx_intc.c b/arch/powerpc/sysdev/xilinx_intc.c index 3ee1fd3..40edad52 100644 --- a/arch/powerpc/sysdev/xilinx_intc.c +++ b/arch/powerpc/sysdev/xilinx_intc.c @@ -234,7 +234,6 @@ static void xilinx_i8259_cascade(unsigned int irq, struct irq_desc *desc) generic_handle_irq(cascade_irq); /* Let xilinx_intc end the interrupt */ - desc->chip->ack(irq); desc->chip->unmask(irq); } -- cgit v1.1