From 20252d46597e457b7506f28be05478be457b8c4f Mon Sep 17 00:00:00 2001 From: Charulatha V Date: Fri, 8 Oct 2010 10:23:06 -0700 Subject: OMAP2PLUS: WDT: Fix: Disable WDT after reset during init Inorder to avoid any assumptions from bootloader, the watchdog timer module is reset during init. This enables the watchdog timer. Therefore, it is required to disable WDT after it is reset during init. Otherwise the system would reboot as per the default watchdog timer registers settings. Later, when the watchdog driver is loaded, the watchdog timer settings is adjusted as per the default timer_margin set in the driver and the driver would supports the normal operations supported by OMAP watchdog timer. Signed-off-by: Charulatha V Reported-by: Kevin Hilman Acked-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/devices.c | 61 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 61 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 5eb0b58..818452a 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -914,11 +914,72 @@ static inline void omap_init_vout(void) {} /*-------------------------------------------------------------------------*/ +/* + * Inorder to avoid any assumptions from bootloader regarding WDT + * settings, WDT module is reset during init. This enables the watchdog + * timer. Hence it is required to disable the watchdog after the WDT reset + * during init. Otherwise the system would reboot as per the default + * watchdog timer registers settings. + */ +#define OMAP_WDT_WPS (0x34) +#define OMAP_WDT_SPR (0x48) + +static int omap2_disable_wdt(struct omap_hwmod *oh, void *unused) +{ + void __iomem *base; + int ret; + + if (!oh) { + pr_err("%s: Could not look up wdtimer_hwmod\n", __func__); + return -EINVAL; + } + + base = omap_hwmod_get_mpu_rt_va(oh); + if (!base) { + pr_err("%s: Could not get the base address for %s\n", + oh->name, __func__); + return -EINVAL; + } + + /* Enable the clocks before accessing the WDT registers */ + ret = omap_hwmod_enable(oh); + if (ret) { + pr_err("%s: Could not enable clocks for %s\n", + oh->name, __func__); + return ret; + } + + /* sequence required to disable watchdog */ + __raw_writel(0xAAAA, base + OMAP_WDT_SPR); + while (__raw_readl(base + OMAP_WDT_WPS) & 0x10) + cpu_relax(); + + __raw_writel(0x5555, base + OMAP_WDT_SPR); + while (__raw_readl(base + OMAP_WDT_WPS) & 0x10) + cpu_relax(); + + ret = omap_hwmod_idle(oh); + if (ret) + pr_err("%s: Could not disable clocks for %s\n", + oh->name, __func__); + + return ret; +} + +static void __init omap_disable_wdt(void) +{ + if (cpu_class_is_omap2()) + omap_hwmod_for_each_by_class("wd_timer", + omap2_disable_wdt, NULL); + return; +} + static int __init omap2_init_devices(void) { /* please keep these calls, and their implementations above, * in alphabetical order so they're easier to sort through. */ + omap_disable_wdt(); omap_hsmmc_reset(); omap_init_camera(); omap_init_mbox(); -- cgit v1.1