From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- arch/x86_64/boot/Makefile | 102 ++ arch/x86_64/boot/bootsect.S | 98 ++ arch/x86_64/boot/compressed/Makefile | 32 + arch/x86_64/boot/compressed/head.S | 142 +++ arch/x86_64/boot/compressed/misc.c | 354 ++++++ arch/x86_64/boot/compressed/miscsetup.h | 39 + arch/x86_64/boot/compressed/vmlinux.scr | 9 + arch/x86_64/boot/install.sh | 40 + arch/x86_64/boot/mtools.conf.in | 17 + arch/x86_64/boot/setup.S | 867 +++++++++++++ arch/x86_64/boot/tools/build.c | 186 +++ arch/x86_64/boot/video.S | 2007 +++++++++++++++++++++++++++++++ 12 files changed, 3893 insertions(+) create mode 100644 arch/x86_64/boot/Makefile create mode 100644 arch/x86_64/boot/bootsect.S create mode 100644 arch/x86_64/boot/compressed/Makefile create mode 100644 arch/x86_64/boot/compressed/head.S create mode 100644 arch/x86_64/boot/compressed/misc.c create mode 100644 arch/x86_64/boot/compressed/miscsetup.h create mode 100644 arch/x86_64/boot/compressed/vmlinux.scr create mode 100644 arch/x86_64/boot/install.sh create mode 100644 arch/x86_64/boot/mtools.conf.in create mode 100644 arch/x86_64/boot/setup.S create mode 100644 arch/x86_64/boot/tools/build.c create mode 100644 arch/x86_64/boot/video.S (limited to 'arch/x86_64/boot') diff --git a/arch/x86_64/boot/Makefile b/arch/x86_64/boot/Makefile new file mode 100644 index 0000000..f4399c7 --- /dev/null +++ b/arch/x86_64/boot/Makefile @@ -0,0 +1,102 @@ +# +# arch/x86_64/boot/Makefile +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# +# Copyright (C) 1994 by Linus Torvalds +# + +# ROOT_DEV specifies the default root-device when making the image. +# This can be either FLOPPY, CURRENT, /dev/xxxx or empty, in which case +# the default of FLOPPY is used by 'build'. + +ROOT_DEV := CURRENT + +# If you want to preset the SVGA mode, uncomment the next line and +# set SVGA_MODE to whatever number you want. +# Set it to -DSVGA_MODE=NORMAL_VGA if you just want the EGA/VGA mode. +# The number is the same as you would ordinarily press at bootup. + +SVGA_MODE := -DSVGA_MODE=NORMAL_VGA + +# If you want the RAM disk device, define this to be the size in blocks. + +#RAMDISK := -DRAMDISK=512 + +targets := vmlinux.bin bootsect bootsect.o \ + setup setup.o bzImage mtools.conf + +EXTRA_CFLAGS := -m32 + +hostprogs-y := tools/build +HOST_EXTRACFLAGS += $(LINUXINCLUDE) +subdir- := compressed/ #Let make clean descend in compressed/ +# --------------------------------------------------------------------------- + +$(obj)/bzImage: IMAGE_OFFSET := 0x100000 +$(obj)/bzImage: EXTRA_AFLAGS := -traditional $(SVGA_MODE) $(RAMDISK) -D__BIG_KERNEL__ +$(obj)/bzImage: BUILDFLAGS := -b + +quiet_cmd_image = BUILD $@ +cmd_image = $(obj)/tools/build $(BUILDFLAGS) $(obj)/bootsect $(obj)/setup \ + $(obj)/vmlinux.bin $(ROOT_DEV) > $@ + +$(obj)/bzImage: $(obj)/bootsect $(obj)/setup \ + $(obj)/vmlinux.bin $(obj)/tools/build FORCE + $(call if_changed,image) + @echo 'Kernel: $@ is ready' + +$(obj)/vmlinux.bin: $(obj)/compressed/vmlinux FORCE + $(call if_changed,objcopy) + +LDFLAGS_bootsect := -Ttext 0x0 -s --oformat binary +LDFLAGS_setup := -Ttext 0x0 -s --oformat binary -e begtext + +$(obj)/setup $(obj)/bootsect: %: %.o FORCE + $(call if_changed,ld) + +$(obj)/compressed/vmlinux: FORCE + $(Q)$(MAKE) $(build)=$(obj)/compressed IMAGE_OFFSET=$(IMAGE_OFFSET) $@ + +# Set this if you want to pass append arguments to the zdisk/fdimage kernel +FDARGS = + +$(obj)/mtools.conf: $(src)/mtools.conf.in + sed -e 's|@OBJ@|$(obj)|g' < $< > $@ + +# This requires write access to /dev/fd0 +zdisk: $(BOOTIMAGE) $(obj)/mtools.conf + MTOOLSRC=$(obj)/mtools.conf mformat a: ; sync + syslinux /dev/fd0 ; sync + echo 'default linux $(FDARGS)' | \ + MTOOLSRC=$(obj)/mtools.conf mcopy - a:syslinux.cfg + MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) a:linux ; sync + +# These require being root or having syslinux 2.02 or higher installed +fdimage fdimage144: $(BOOTIMAGE) $(obj)/mtools.conf + dd if=/dev/zero of=$(obj)/fdimage bs=1024 count=1440 + MTOOLSRC=$(obj)/mtools.conf mformat v: ; sync + syslinux $(obj)/fdimage ; sync + echo 'default linux $(FDARGS)' | \ + MTOOLSRC=$(obj)/mtools.conf mcopy - v:syslinux.cfg + MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) v:linux ; sync + +fdimage288: $(BOOTIMAGE) $(obj)/mtools.conf + dd if=/dev/zero of=$(obj)/fdimage bs=1024 count=2880 + MTOOLSRC=$(obj)/mtools.conf mformat w: ; sync + syslinux $(obj)/fdimage ; sync + echo 'default linux $(FDARGS)' | \ + MTOOLSRC=$(obj)/mtools.conf mcopy - w:syslinux.cfg + MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) w:linux ; sync + +zlilo: $(BOOTIMAGE) + if [ -f $(INSTALL_PATH)/vmlinuz ]; then mv $(INSTALL_PATH)/vmlinuz $(INSTALL_PATH)/vmlinuz.old; fi + if [ -f $(INSTALL_PATH)/System.map ]; then mv $(INSTALL_PATH)/System.map $(INSTALL_PATH)/System.old; fi + cat $(BOOTIMAGE) > $(INSTALL_PATH)/vmlinuz + cp System.map $(INSTALL_PATH)/ + if [ -x /sbin/lilo ]; then /sbin/lilo; else /etc/lilo/install; fi + +install: $(BOOTIMAGE) + sh $(srctree)/$(src)/install.sh $(KERNELRELEASE) $(BOOTIMAGE) System.map "$(INSTALL_PATH)" diff --git a/arch/x86_64/boot/bootsect.S b/arch/x86_64/boot/bootsect.S new file mode 100644 index 0000000..bb15d40 --- /dev/null +++ b/arch/x86_64/boot/bootsect.S @@ -0,0 +1,98 @@ +/* + * bootsect.S Copyright (C) 1991, 1992 Linus Torvalds + * + * modified by Drew Eckhardt + * modified by Bruce Evans (bde) + * modified by Chris Noe (May 1999) (as86 -> gas) + * gutted by H. Peter Anvin (Jan 2003) + * + * BIG FAT NOTE: We're in real mode using 64k segments. Therefore segment + * addresses must be multiplied by 16 to obtain their respective linear + * addresses. To avoid confusion, linear addresses are written using leading + * hex while segment addresses are written as segment:offset. + * + */ + +#include + +SETUPSECTS = 4 /* default nr of setup-sectors */ +BOOTSEG = 0x07C0 /* original address of boot-sector */ +INITSEG = DEF_INITSEG /* we move boot here - out of the way */ +SETUPSEG = DEF_SETUPSEG /* setup starts here */ +SYSSEG = DEF_SYSSEG /* system loaded at 0x10000 (65536) */ +SYSSIZE = DEF_SYSSIZE /* system size: # of 16-byte clicks */ + /* to be loaded */ +ROOT_DEV = 0 /* ROOT_DEV is now written by "build" */ +SWAP_DEV = 0 /* SWAP_DEV is now written by "build" */ + +#ifndef SVGA_MODE +#define SVGA_MODE ASK_VGA +#endif + +#ifndef RAMDISK +#define RAMDISK 0 +#endif + +#ifndef ROOT_RDONLY +#define ROOT_RDONLY 1 +#endif + +.code16 +.text + +.global _start +_start: + + # Normalize the start address + jmpl $BOOTSEG, $start2 + +start2: + movw %cs, %ax + movw %ax, %ds + movw %ax, %es + movw %ax, %ss + movw $0x7c00, %sp + sti + cld + + movw $bugger_off_msg, %si + +msg_loop: + lodsb + andb %al, %al + jz die + movb $0xe, %ah + movw $7, %bx + int $0x10 + jmp msg_loop + +die: + # Allow the user to press a key, then reboot + xorw %ax, %ax + int $0x16 + int $0x19 + + # int 0x19 should never return. In case it does anyway, + # invoke the BIOS reset code... + ljmp $0xf000,$0xfff0 + + +bugger_off_msg: + .ascii "Direct booting from floppy is no longer supported.\r\n" + .ascii "Please use a boot loader program instead.\r\n" + .ascii "\n" + .ascii "Remove disk and press any key to reboot . . .\r\n" + .byte 0 + + + # Kernel attributes; used by setup + + .org 497 +setup_sects: .byte SETUPSECTS +root_flags: .word ROOT_RDONLY +syssize: .word SYSSIZE +swap_dev: .word SWAP_DEV +ram_size: .word RAMDISK +vid_mode: .word SVGA_MODE +root_dev: .word ROOT_DEV +boot_flag: .word 0xAA55 diff --git a/arch/x86_64/boot/compressed/Makefile b/arch/x86_64/boot/compressed/Makefile new file mode 100644 index 0000000..f89d96f --- /dev/null +++ b/arch/x86_64/boot/compressed/Makefile @@ -0,0 +1,32 @@ +# +# linux/arch/x86_64/boot/compressed/Makefile +# +# create a compressed vmlinux image from the original vmlinux +# +# Note all the files here are compiled/linked as 32bit executables. +# + +targets := vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o piggy.o +EXTRA_AFLAGS := -traditional -m32 + +# cannot use EXTRA_CFLAGS because base CFLAGS contains -mkernel which conflicts with +# -m32 +CFLAGS := -m32 -D__KERNEL__ -Iinclude -O2 -fno-strict-aliasing +LDFLAGS := -m elf_i386 + +LDFLAGS_vmlinux := -Ttext $(IMAGE_OFFSET) -e startup_32 -m elf_i386 + +$(obj)/vmlinux: $(obj)/head.o $(obj)/misc.o $(obj)/piggy.o FORCE + $(call if_changed,ld) + @: + +$(obj)/vmlinux.bin: vmlinux FORCE + $(call if_changed,objcopy) + +$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE + $(call if_changed,gzip) + +LDFLAGS_piggy.o := -r --format binary --oformat elf32-i386 -T + +$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE + $(call if_changed,ld) diff --git a/arch/x86_64/boot/compressed/head.S b/arch/x86_64/boot/compressed/head.S new file mode 100644 index 0000000..27264db --- /dev/null +++ b/arch/x86_64/boot/compressed/head.S @@ -0,0 +1,142 @@ +/* + * linux/boot/head.S + * + * Copyright (C) 1991, 1992, 1993 Linus Torvalds + * + * $Id: head.S,v 1.3 2001/04/20 00:59:28 ak Exp $ + */ + +/* + * head.S contains the 32-bit startup code. + * + * NOTE!!! Startup happens at absolute address 0x00001000, which is also where + * the page directory will exist. The startup code will be overwritten by + * the page directory. [According to comments etc elsewhere on a compressed + * kernel it will end up at 0x1000 + 1Mb I hope so as I assume this. - AC] + * + * Page 0 is deliberately kept safe, since System Management Mode code in + * laptops may need to access the BIOS data stored there. This is also + * useful for future device drivers that either access the BIOS via VM86 + * mode. + */ + +/* + * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996 + */ +.code32 +.text + +#include +#include + + .code32 + .globl startup_32 + +startup_32: + cld + cli + movl $(__KERNEL_DS),%eax + movl %eax,%ds + movl %eax,%es + movl %eax,%fs + movl %eax,%gs + + lss stack_start,%esp + xorl %eax,%eax +1: incl %eax # check that A20 really IS enabled + movl %eax,0x000000 # loop forever if it isn't + cmpl %eax,0x100000 + je 1b + +/* + * Initialize eflags. Some BIOS's leave bits like NT set. This would + * confuse the debugger if this code is traced. + * XXX - best to initialize before switching to protected mode. + */ + pushl $0 + popfl +/* + * Clear BSS + */ + xorl %eax,%eax + movl $_edata,%edi + movl $_end,%ecx + subl %edi,%ecx + cld + rep + stosb +/* + * Do the decompression, and jump to the new kernel.. + */ + subl $16,%esp # place for structure on the stack + movl %esp,%eax + pushl %esi # real mode pointer as second arg + pushl %eax # address of structure as first arg + call decompress_kernel + orl %eax,%eax + jnz 3f + addl $8,%esp + xorl %ebx,%ebx + ljmp $(__KERNEL_CS), $0x100000 + +/* + * We come here, if we were loaded high. + * We need to move the move-in-place routine down to 0x1000 + * and then start it with the buffer addresses in registers, + * which we got from the stack. + */ +3: + movl %esi,%ebx + movl $move_routine_start,%esi + movl $0x1000,%edi + movl $move_routine_end,%ecx + subl %esi,%ecx + addl $3,%ecx + shrl $2,%ecx + cld + rep + movsl + + popl %esi # discard the address + addl $4,%esp # real mode pointer + popl %esi # low_buffer_start + popl %ecx # lcount + popl %edx # high_buffer_start + popl %eax # hcount + movl $0x100000,%edi + cli # make sure we don't get interrupted + ljmp $(__KERNEL_CS), $0x1000 # and jump to the move routine + +/* + * Routine (template) for moving the decompressed kernel in place, + * if we were high loaded. This _must_ PIC-code ! + */ +move_routine_start: + movl %ecx,%ebp + shrl $2,%ecx + rep + movsl + movl %ebp,%ecx + andl $3,%ecx + rep + movsb + movl %edx,%esi + movl %eax,%ecx # NOTE: rep movsb won't move if %ecx == 0 + addl $3,%ecx + shrl $2,%ecx + rep + movsl + movl %ebx,%esi # Restore setup pointer + xorl %ebx,%ebx + ljmp $(__KERNEL_CS), $0x100000 +move_routine_end: + + +/* Stack for uncompression */ + .align 32 +user_stack: + .fill 4096,4,0 +stack_start: + .long user_stack+4096 + .word __KERNEL_DS + diff --git a/arch/x86_64/boot/compressed/misc.c b/arch/x86_64/boot/compressed/misc.c new file mode 100644 index 0000000..c8b9216 --- /dev/null +++ b/arch/x86_64/boot/compressed/misc.c @@ -0,0 +1,354 @@ +/* + * misc.c + * + * This is a collection of several routines from gzip-1.0.3 + * adapted for Linux. + * + * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994 + * puts by Nick Holloway 1993, better puts by Martin Mares 1995 + * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996 + */ + +#include "miscsetup.h" +#include + +/* + * gzip declarations + */ + +#define OF(args) args +#define STATIC static + +#undef memset +#undef memcpy +#define memzero(s, n) memset ((s), 0, (n)) + +typedef unsigned char uch; +typedef unsigned short ush; +typedef unsigned long ulg; + +#define WSIZE 0x8000 /* Window size must be at least 32k, */ + /* and a power of two */ + +static uch *inbuf; /* input buffer */ +static uch window[WSIZE]; /* Sliding window buffer */ + +static unsigned insize = 0; /* valid bytes in inbuf */ +static unsigned inptr = 0; /* index of next byte to be processed in inbuf */ +static unsigned outcnt = 0; /* bytes in output buffer */ + +/* gzip flag byte */ +#define ASCII_FLAG 0x01 /* bit 0 set: file probably ASCII text */ +#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */ +#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */ +#define ORIG_NAME 0x08 /* bit 3 set: original file name present */ +#define COMMENT 0x10 /* bit 4 set: file comment present */ +#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */ +#define RESERVED 0xC0 /* bit 6,7: reserved */ + +#define get_byte() (inptr < insize ? inbuf[inptr++] : fill_inbuf()) + +/* Diagnostic functions */ +#ifdef DEBUG +# define Assert(cond,msg) {if(!(cond)) error(msg);} +# define Trace(x) fprintf x +# define Tracev(x) {if (verbose) fprintf x ;} +# define Tracevv(x) {if (verbose>1) fprintf x ;} +# define Tracec(c,x) {if (verbose && (c)) fprintf x ;} +# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;} +#else +# define Assert(cond,msg) +# define Trace(x) +# define Tracev(x) +# define Tracevv(x) +# define Tracec(c,x) +# define Tracecv(c,x) +#endif + +static int fill_inbuf(void); +static void flush_window(void); +static void error(char *m); +static void gzip_mark(void **); +static void gzip_release(void **); + +/* + * This is set up by the setup-routine at boot-time + */ +static unsigned char *real_mode; /* Pointer to real-mode data */ + +#define EXT_MEM_K (*(unsigned short *)(real_mode + 0x2)) +#ifndef STANDARD_MEMORY_BIOS_CALL +#define ALT_MEM_K (*(unsigned long *)(real_mode + 0x1e0)) +#endif +#define SCREEN_INFO (*(struct screen_info *)(real_mode+0)) + +extern char input_data[]; +extern int input_len; + +static long bytes_out = 0; +static uch *output_data; +static unsigned long output_ptr = 0; + +static void *malloc(int size); +static void free(void *where); + +static void putstr(const char *); + +extern int end; +static long free_mem_ptr = (long)&end; +static long free_mem_end_ptr; + +#define INPLACE_MOVE_ROUTINE 0x1000 +#define LOW_BUFFER_START 0x2000 +#define LOW_BUFFER_MAX 0x90000 +#define HEAP_SIZE 0x3000 +static unsigned int low_buffer_end, low_buffer_size; +static int high_loaded =0; +static uch *high_buffer_start /* = (uch *)(((ulg)&end) + HEAP_SIZE)*/; + +static char *vidmem = (char *)0xb8000; +static int vidport; +static int lines, cols; + +#include "../../../../lib/inflate.c" + +static void *malloc(int size) +{ + void *p; + + if (size <0) error("Malloc error"); + if (free_mem_ptr <= 0) error("Memory error"); + + free_mem_ptr = (free_mem_ptr + 3) & ~3; /* Align */ + + p = (void *)free_mem_ptr; + free_mem_ptr += size; + + if (free_mem_ptr >= free_mem_end_ptr) + error("Out of memory"); + + return p; +} + +static void free(void *where) +{ /* Don't care */ +} + +static void gzip_mark(void **ptr) +{ + *ptr = (void *) free_mem_ptr; +} + +static void gzip_release(void **ptr) +{ + free_mem_ptr = (long) *ptr; +} + +static void scroll(void) +{ + int i; + + memcpy ( vidmem, vidmem + cols * 2, ( lines - 1 ) * cols * 2 ); + for ( i = ( lines - 1 ) * cols * 2; i < lines * cols * 2; i += 2 ) + vidmem[i] = ' '; +} + +static void putstr(const char *s) +{ + int x,y,pos; + char c; + + x = SCREEN_INFO.orig_x; + y = SCREEN_INFO.orig_y; + + while ( ( c = *s++ ) != '\0' ) { + if ( c == '\n' ) { + x = 0; + if ( ++y >= lines ) { + scroll(); + y--; + } + } else { + vidmem [ ( x + cols * y ) * 2 ] = c; + if ( ++x >= cols ) { + x = 0; + if ( ++y >= lines ) { + scroll(); + y--; + } + } + } + } + + SCREEN_INFO.orig_x = x; + SCREEN_INFO.orig_y = y; + + pos = (x + cols * y) * 2; /* Update cursor position */ + outb_p(14, vidport); + outb_p(0xff & (pos >> 9), vidport+1); + outb_p(15, vidport); + outb_p(0xff & (pos >> 1), vidport+1); +} + +void* memset(void* s, int c, unsigned n) +{ + int i; + char *ss = (char*)s; + + for (i=0;i> 8); + } + crc = c; + bytes_out += (ulg)outcnt; + output_ptr += (ulg)outcnt; + outcnt = 0; +} + +static void flush_window_high(void) +{ + ulg c = crc; /* temporary variable */ + unsigned n; + uch *in, ch; + in = window; + for (n = 0; n < outcnt; n++) { + ch = *output_data++ = *in++; + if ((ulg)output_data == low_buffer_end) output_data=high_buffer_start; + c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8); + } + crc = c; + bytes_out += (ulg)outcnt; + outcnt = 0; +} + +static void flush_window(void) +{ + if (high_loaded) flush_window_high(); + else flush_window_low(); +} + +static void error(char *x) +{ + putstr("\n\n"); + putstr(x); + putstr("\n\n -- System halted"); + + while(1); +} + +void setup_normal_output_buffer(void) +{ +#ifdef STANDARD_MEMORY_BIOS_CALL + if (EXT_MEM_K < 1024) error("Less than 2MB of memory"); +#else + if ((ALT_MEM_K > EXT_MEM_K ? ALT_MEM_K : EXT_MEM_K) < 1024) error("Less than 2MB of memory"); +#endif + output_data = (char *)0x100000; /* Points to 1M */ + free_mem_end_ptr = (long)real_mode; +} + +struct moveparams { + uch *low_buffer_start; int lcount; + uch *high_buffer_start; int hcount; +}; + +void setup_output_buffer_if_we_run_high(struct moveparams *mv) +{ + high_buffer_start = (uch *)(((ulg)&end) + HEAP_SIZE); +#ifdef STANDARD_MEMORY_BIOS_CALL + if (EXT_MEM_K < (3*1024)) error("Less than 4MB of memory"); +#else + if ((ALT_MEM_K > EXT_MEM_K ? ALT_MEM_K : EXT_MEM_K) < (3*1024)) error("Less than 4MB of memory"); +#endif + mv->low_buffer_start = output_data = (char *)LOW_BUFFER_START; + low_buffer_end = ((unsigned int)real_mode > LOW_BUFFER_MAX + ? LOW_BUFFER_MAX : (unsigned int)real_mode) & ~0xfff; + low_buffer_size = low_buffer_end - LOW_BUFFER_START; + high_loaded = 1; + free_mem_end_ptr = (long)high_buffer_start; + if ( (0x100000 + low_buffer_size) > ((ulg)high_buffer_start)) { + high_buffer_start = (uch *)(0x100000 + low_buffer_size); + mv->hcount = 0; /* say: we need not to move high_buffer */ + } + else mv->hcount = -1; + mv->high_buffer_start = high_buffer_start; +} + +void close_output_buffer_if_we_run_high(struct moveparams *mv) +{ + if (bytes_out > low_buffer_size) { + mv->lcount = low_buffer_size; + if (mv->hcount) + mv->hcount = bytes_out - low_buffer_size; + } else { + mv->lcount = bytes_out; + mv->hcount = 0; + } +} + +int decompress_kernel(struct moveparams *mv, void *rmode) +{ + real_mode = rmode; + + if (SCREEN_INFO.orig_video_mode == 7) { + vidmem = (char *) 0xb0000; + vidport = 0x3b4; + } else { + vidmem = (char *) 0xb8000; + vidport = 0x3d4; + } + + lines = SCREEN_INFO.orig_video_lines; + cols = SCREEN_INFO.orig_video_cols; + + if (free_mem_ptr < 0x100000) setup_normal_output_buffer(); + else setup_output_buffer_if_we_run_high(mv); + + makecrc(); + putstr(".\nDecompressing Linux..."); + gunzip(); + putstr("done.\nBooting the kernel.\n"); + if (high_loaded) close_output_buffer_if_we_run_high(mv); + return high_loaded; +} diff --git a/arch/x86_64/boot/compressed/miscsetup.h b/arch/x86_64/boot/compressed/miscsetup.h new file mode 100644 index 0000000..bb16205 --- /dev/null +++ b/arch/x86_64/boot/compressed/miscsetup.h @@ -0,0 +1,39 @@ +#define NULL 0 +//typedef unsigned int size_t; + + +struct screen_info { + unsigned char orig_x; /* 0x00 */ + unsigned char orig_y; /* 0x01 */ + unsigned short dontuse1; /* 0x02 -- EXT_MEM_K sits here */ + unsigned short orig_video_page; /* 0x04 */ + unsigned char orig_video_mode; /* 0x06 */ + unsigned char orig_video_cols; /* 0x07 */ + unsigned short unused2; /* 0x08 */ + unsigned short orig_video_ega_bx; /* 0x0a */ + unsigned short unused3; /* 0x0c */ + unsigned char orig_video_lines; /* 0x0e */ + unsigned char orig_video_isVGA; /* 0x0f */ + unsigned short orig_video_points; /* 0x10 */ + + /* VESA graphic mode -- linear frame buffer */ + unsigned short lfb_width; /* 0x12 */ + unsigned short lfb_height; /* 0x14 */ + unsigned short lfb_depth; /* 0x16 */ + unsigned long lfb_base; /* 0x18 */ + unsigned long lfb_size; /* 0x1c */ + unsigned short dontuse2, dontuse3; /* 0x20 -- CL_MAGIC and CL_OFFSET here */ + unsigned short lfb_linelength; /* 0x24 */ + unsigned char red_size; /* 0x26 */ + unsigned char red_pos; /* 0x27 */ + unsigned char green_size; /* 0x28 */ + unsigned char green_pos; /* 0x29 */ + unsigned char blue_size; /* 0x2a */ + unsigned char blue_pos; /* 0x2b */ + unsigned char rsvd_size; /* 0x2c */ + unsigned char rsvd_pos; /* 0x2d */ + unsigned short vesapm_seg; /* 0x2e */ + unsigned short vesapm_off; /* 0x30 */ + unsigned short pages; /* 0x32 */ + /* 0x34 -- 0x3f reserved for future expansion */ +}; diff --git a/arch/x86_64/boot/compressed/vmlinux.scr b/arch/x86_64/boot/compressed/vmlinux.scr new file mode 100644 index 0000000..1ed9d79 --- /dev/null +++ b/arch/x86_64/boot/compressed/vmlinux.scr @@ -0,0 +1,9 @@ +SECTIONS +{ + .data : { + input_len = .; + LONG(input_data_end - input_data) input_data = .; + *(.data) + input_data_end = .; + } +} diff --git a/arch/x86_64/boot/install.sh b/arch/x86_64/boot/install.sh new file mode 100644 index 0000000..90f2452 --- /dev/null +++ b/arch/x86_64/boot/install.sh @@ -0,0 +1,40 @@ +#!/bin/sh +# +# arch/i386/boot/install.sh +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# +# Copyright (C) 1995 by Linus Torvalds +# +# Adapted from code in arch/i386/boot/Makefile by H. Peter Anvin +# +# "make install" script for i386 architecture +# +# Arguments: +# $1 - kernel version +# $2 - kernel image file +# $3 - kernel map file +# $4 - default install path (blank if root directory) +# + +# User may have a custom install script + +if [ -x ~/bin/installkernel ]; then exec ~/bin/installkernel "$@"; fi +if [ -x /sbin/installkernel ]; then exec /sbin/installkernel "$@"; fi + +# Default install - same as make zlilo + +if [ -f $4/vmlinuz ]; then + mv $4/vmlinuz $4/vmlinuz.old +fi + +if [ -f $4/System.map ]; then + mv $4/System.map $4/System.old +fi + +cat $2 > $4/vmlinuz +cp $3 $4/System.map + +if [ -x /sbin/lilo ]; then /sbin/lilo; else /etc/lilo/install; fi diff --git a/arch/x86_64/boot/mtools.conf.in b/arch/x86_64/boot/mtools.conf.in new file mode 100644 index 0000000..efd6d24 --- /dev/null +++ b/arch/x86_64/boot/mtools.conf.in @@ -0,0 +1,17 @@ +# +# mtools configuration file for "make (b)zdisk" +# + +# Actual floppy drive +drive a: + file="/dev/fd0" + +# 1.44 MB floppy disk image +drive v: + file="@OBJ@/fdimage" cylinders=80 heads=2 sectors=18 filter + +# 2.88 MB floppy disk image (mostly for virtual uses) +drive w: + file="@OBJ@/fdimage" cylinders=80 heads=2 sectors=36 filter + + diff --git a/arch/x86_64/boot/setup.S b/arch/x86_64/boot/setup.S new file mode 100644 index 0000000..3e838be --- /dev/null +++ b/arch/x86_64/boot/setup.S @@ -0,0 +1,867 @@ +/* + * setup.S Copyright (C) 1991, 1992 Linus Torvalds + * + * setup.s is responsible for getting the system data from the BIOS, + * and putting them into the appropriate places in system memory. + * both setup.s and system has been loaded by the bootblock. + * + * This code asks the bios for memory/disk/other parameters, and + * puts them in a "safe" place: 0x90000-0x901FF, ie where the + * boot-block used to be. It is then up to the protected mode + * system to read them from there before the area is overwritten + * for buffer-blocks. + * + * Move PS/2 aux init code to psaux.c + * (troyer@saifr00.cfsat.Honeywell.COM) 03Oct92 + * + * some changes and additional features by Christoph Niemann, + * March 1993/June 1994 (Christoph.Niemann@linux.org) + * + * add APM BIOS checking by Stephen Rothwell, May 1994 + * (sfr@canb.auug.org.au) + * + * High load stuff, initrd support and position independency + * by Hans Lermen & Werner Almesberger, February 1996 + * , + * + * Video handling moved to video.S by Martin Mares, March 1996 + * + * + * Extended memory detection scheme retwiddled by orc@pell.chi.il.us (david + * parsons) to avoid loadlin confusion, July 1997 + * + * Transcribed from Intel (as86) -> AT&T (gas) by Chris Noe, May 1999. + * + * + * Fix to work around buggy BIOSes which dont use carry bit correctly + * and/or report extended memory in CX/DX for e801h memory size detection + * call. As a result the kernel got wrong figures. The int15/e801h docs + * from Ralf Brown interrupt list seem to indicate AX/BX should be used + * anyway. So to avoid breaking many machines (presumably there was a reason + * to orginally use CX/DX instead of AX/BX), we do a kludge to see + * if CX/DX have been changed in the e801 call and if so use AX/BX . + * Michael Miller, April 2001 + * + * Added long mode checking and SSE force. March 2003, Andi Kleen. + */ + +#include +#include +#include +#include +#include +#include +#include + +/* Signature words to ensure LILO loaded us right */ +#define SIG1 0xAA55 +#define SIG2 0x5A5A + +INITSEG = DEF_INITSEG # 0x9000, we move boot here, out of the way +SYSSEG = DEF_SYSSEG # 0x1000, system loaded at 0x10000 (65536). +SETUPSEG = DEF_SETUPSEG # 0x9020, this is the current segment + # ... and the former contents of CS + +DELTA_INITSEG = SETUPSEG - INITSEG # 0x0020 + +.code16 +.globl begtext, begdata, begbss, endtext, enddata, endbss + +.text +begtext: +.data +begdata: +.bss +begbss: +.text + +start: + jmp trampoline + +# This is the setup header, and it must start at %cs:2 (old 0x9020:2) + + .ascii "HdrS" # header signature + .word 0x0203 # header version number (>= 0x0105) + # or else old loadlin-1.5 will fail) +realmode_swtch: .word 0, 0 # default_switch, SETUPSEG +start_sys_seg: .word SYSSEG + .word kernel_version # pointing to kernel version string + # above section of header is compatible + # with loadlin-1.5 (header v1.5). Don't + # change it. + +type_of_loader: .byte 0 # = 0, old one (LILO, Loadlin, + # Bootlin, SYSLX, bootsect...) + # See Documentation/i386/boot.txt for + # assigned ids + +# flags, unused bits must be zero (RFU) bit within loadflags +loadflags: +LOADED_HIGH = 1 # If set, the kernel is loaded high +CAN_USE_HEAP = 0x80 # If set, the loader also has set + # heap_end_ptr to tell how much + # space behind setup.S can be used for + # heap purposes. + # Only the loader knows what is free +#ifndef __BIG_KERNEL__ + .byte 0 +#else + .byte LOADED_HIGH +#endif + +setup_move_size: .word 0x8000 # size to move, when setup is not + # loaded at 0x90000. We will move setup + # to 0x90000 then just before jumping + # into the kernel. However, only the + # loader knows how much data behind + # us also needs to be loaded. + +code32_start: # here loaders can put a different + # start address for 32-bit code. +#ifndef __BIG_KERNEL__ + .long 0x1000 # 0x1000 = default for zImage +#else + .long 0x100000 # 0x100000 = default for big kernel +#endif + +ramdisk_image: .long 0 # address of loaded ramdisk image + # Here the loader puts the 32-bit + # address where it loaded the image. + # This only will be read by the kernel. + +ramdisk_size: .long 0 # its size in bytes + +bootsect_kludge: + .long 0 # obsolete + +heap_end_ptr: .word modelist+1024 # (Header version 0x0201 or later) + # space from here (exclusive) down to + # end of setup code can be used by setup + # for local heap purposes. + +pad1: .word 0 +cmd_line_ptr: .long 0 # (Header version 0x0202 or later) + # If nonzero, a 32-bit pointer + # to the kernel command line. + # The command line should be + # located between the start of + # setup and the end of low + # memory (0xa0000), or it may + # get overwritten before it + # gets read. If this field is + # used, there is no longer + # anything magical about the + # 0x90000 segment; the setup + # can be located anywhere in + # low memory 0x10000 or higher. + +ramdisk_max: .long 0xffffffff + +trampoline: call start_of_setup + .align 16 + # The offset at this point is 0x240 + .space (0x7ff-0x240+1) # E820 & EDD space (ending at 0x7ff) +# End of setup header ##################################################### + +start_of_setup: +# Bootlin depends on this being done early + movw $0x01500, %ax + movb $0x81, %dl + int $0x13 + +#ifdef SAFE_RESET_DISK_CONTROLLER +# Reset the disk controller. + movw $0x0000, %ax + movb $0x80, %dl + int $0x13 +#endif + +# Set %ds = %cs, we know that SETUPSEG = %cs at this point + movw %cs, %ax # aka SETUPSEG + movw %ax, %ds +# Check signature at end of setup + cmpw $SIG1, setup_sig1 + jne bad_sig + + cmpw $SIG2, setup_sig2 + jne bad_sig + + jmp good_sig1 + +# Routine to print asciiz string at ds:si +prtstr: + lodsb + andb %al, %al + jz fin + + call prtchr + jmp prtstr + +fin: ret + +# Space printing +prtsp2: call prtspc # Print double space +prtspc: movb $0x20, %al # Print single space (note: fall-thru) + +prtchr: + pushw %ax + pushw %cx + movw $0007,%bx + movw $0x01, %cx + movb $0x0e, %ah + int $0x10 + popw %cx + popw %ax + ret + +beep: movb $0x07, %al + jmp prtchr + +no_sig_mess: .string "No setup signature found ..." + +good_sig1: + jmp good_sig + +# We now have to find the rest of the setup code/data +bad_sig: + movw %cs, %ax # SETUPSEG + subw $DELTA_INITSEG, %ax # INITSEG + movw %ax, %ds + xorb %bh, %bh + movb (497), %bl # get setup sect from bootsect + subw $4, %bx # LILO loads 4 sectors of setup + shlw $8, %bx # convert to words (1sect=2^8 words) + movw %bx, %cx + shrw $3, %bx # convert to segment + addw $SYSSEG, %bx + movw %bx, %cs:start_sys_seg +# Move rest of setup code/data to here + movw $2048, %di # four sectors loaded by LILO + subw %si, %si + movw %cs, %ax # aka SETUPSEG + movw %ax, %es + movw $SYSSEG, %ax + movw %ax, %ds + rep + movsw + movw %cs, %ax # aka SETUPSEG + movw %ax, %ds + cmpw $SIG1, setup_sig1 + jne no_sig + + cmpw $SIG2, setup_sig2 + jne no_sig + + jmp good_sig + +no_sig: + lea no_sig_mess, %si + call prtstr + +no_sig_loop: + jmp no_sig_loop + +good_sig: + movw %cs, %ax # aka SETUPSEG + subw $DELTA_INITSEG, %ax # aka INITSEG + movw %ax, %ds +# Check if an old loader tries to load a big-kernel + testb $LOADED_HIGH, %cs:loadflags # Do we have a big kernel? + jz loader_ok # No, no danger for old loaders. + + cmpb $0, %cs:type_of_loader # Do we have a loader that + # can deal with us? + jnz loader_ok # Yes, continue. + + pushw %cs # No, we have an old loader, + popw %ds # die. + lea loader_panic_mess, %si + call prtstr + + jmp no_sig_loop + +loader_panic_mess: .string "Wrong loader, giving up..." + +loader_ok: + /* check for long mode. */ + /* we have to do this before the VESA setup, otherwise the user + can't see the error message. */ + + pushw %ds + movw %cs,%ax + movw %ax,%ds + + /* minimum CPUID flags for x86-64 */ + /* see http://www.x86-64.org/lists/discuss/msg02971.html */ +#define SSE_MASK ((1<<25)|(1<<26)) +#define REQUIRED_MASK1 ((1<<0)|(1<<3)|(1<<4)|(1<<5)|(1<<6)|(1<<8)|\ + (1<<13)|(1<<15)|(1<<24)) +#define REQUIRED_MASK2 (1<<29) + + pushfl /* standard way to check for cpuid */ + popl %eax + movl %eax,%ebx + xorl $0x200000,%eax + pushl %eax + popfl + pushfl + popl %eax + cmpl %eax,%ebx + jz no_longmode /* cpu has no cpuid */ + movl $0x0,%eax + cpuid + cmpl $0x1,%eax + jb no_longmode /* no cpuid 1 */ + xor %di,%di + cmpl $0x68747541,%ebx /* AuthenticAMD */ + jnz noamd + cmpl $0x69746e65,%edx + jnz noamd + cmpl $0x444d4163,%ecx + jnz noamd + mov $1,%di /* cpu is from AMD */ +noamd: + movl $0x1,%eax + cpuid + andl $REQUIRED_MASK1,%edx + xorl $REQUIRED_MASK1,%edx + jnz no_longmode + movl $0x80000000,%eax + cpuid + cmpl $0x80000001,%eax + jb no_longmode /* no extended cpuid */ + movl $0x80000001,%eax + cpuid + andl $REQUIRED_MASK2,%edx + xorl $REQUIRED_MASK2,%edx + jnz no_longmode +sse_test: + movl $1,%eax + cpuid + andl $SSE_MASK,%edx + cmpl $SSE_MASK,%edx + je sse_ok + test %di,%di + jz no_longmode /* only try to force SSE on AMD */ + movl $0xc0010015,%ecx /* HWCR */ + rdmsr + btr $15,%eax /* enable SSE */ + wrmsr + xor %di,%di /* don't loop */ + jmp sse_test /* try again */ +no_longmode: + call beep + lea long_mode_panic,%si + call prtstr +no_longmode_loop: + jmp no_longmode_loop +long_mode_panic: + .string "Your CPU does not support long mode. Use a 32bit distribution." + .byte 0 + +sse_ok: + popw %ds + +# tell BIOS we want to go to long mode + movl $0xec00,%eax # declare target operating mode + movl $2,%ebx # long mode + int $0x15 + +# Get memory size (extended mem, kB) + + xorl %eax, %eax + movl %eax, (0x1e0) +#ifndef STANDARD_MEMORY_BIOS_CALL + movb %al, (E820NR) +# Try three different memory detection schemes. First, try +# e820h, which lets us assemble a memory map, then try e801h, +# which returns a 32-bit memory size, and finally 88h, which +# returns 0-64m + +# method E820H: +# the memory map from hell. e820h returns memory classified into +# a whole bunch of different types, and allows memory holes and +# everything. We scan through this memory map and build a list +# of the first 32 memory areas, which we return at [E820MAP]. +# This is documented at http://www.teleport.com/~acpi/acpihtml/topic245.htm + +#define SMAP 0x534d4150 + +meme820: + xorl %ebx, %ebx # continuation counter + movw $E820MAP, %di # point into the whitelist + # so we can have the bios + # directly write into it. + +jmpe820: + movl $0x0000e820, %eax # e820, upper word zeroed + movl $SMAP, %edx # ascii 'SMAP' + movl $20, %ecx # size of the e820rec + pushw %ds # data record. + popw %es + int $0x15 # make the call + jc bail820 # fall to e801 if it fails + + cmpl $SMAP, %eax # check the return is `SMAP' + jne bail820 # fall to e801 if it fails + +# cmpl $1, 16(%di) # is this usable memory? +# jne again820 + + # If this is usable memory, we save it by simply advancing %di by + # sizeof(e820rec). + # +good820: + movb (E820NR), %al # up to 32 entries + cmpb $E820MAX, %al + jnl bail820 + + incb (E820NR) + movw %di, %ax + addw $20, %ax + movw %ax, %di +again820: + cmpl $0, %ebx # check to see if + jne jmpe820 # %ebx is set to EOF +bail820: + + +# method E801H: +# memory size is in 1k chunksizes, to avoid confusing loadlin. +# we store the 0xe801 memory size in a completely different place, +# because it will most likely be longer than 16 bits. +# (use 1e0 because that's what Larry Augustine uses in his +# alternative new memory detection scheme, and it's sensible +# to write everything into the same place.) + +meme801: + stc # fix to work around buggy + xorw %cx,%cx # BIOSes which dont clear/set + xorw %dx,%dx # carry on pass/error of + # e801h memory size call + # or merely pass cx,dx though + # without changing them. + movw $0xe801, %ax + int $0x15 + jc mem88 + + cmpw $0x0, %cx # Kludge to handle BIOSes + jne e801usecxdx # which report their extended + cmpw $0x0, %dx # memory in AX/BX rather than + jne e801usecxdx # CX/DX. The spec I have read + movw %ax, %cx # seems to indicate AX/BX + movw %bx, %dx # are more reasonable anyway... + +e801usecxdx: + andl $0xffff, %edx # clear sign extend + shll $6, %edx # and go from 64k to 1k chunks + movl %edx, (0x1e0) # store extended memory size + andl $0xffff, %ecx # clear sign extend + addl %ecx, (0x1e0) # and add lower memory into + # total size. + +# Ye Olde Traditional Methode. Returns the memory size (up to 16mb or +# 64mb, depending on the bios) in ax. +mem88: + +#endif + movb $0x88, %ah + int $0x15 + movw %ax, (2) + +# Set the keyboard repeat rate to the max + movw $0x0305, %ax + xorw %bx, %bx + int $0x16 + +# Check for video adapter and its parameters and allow the +# user to browse video modes. + call video # NOTE: we need %ds pointing + # to bootsector + +# Get hd0 data... + xorw %ax, %ax + movw %ax, %ds + ldsw (4 * 0x41), %si + movw %cs, %ax # aka SETUPSEG + subw $DELTA_INITSEG, %ax # aka INITSEG + pushw %ax + movw %ax, %es + movw $0x0080, %di + movw $0x10, %cx + pushw %cx + cld + rep + movsb +# Get hd1 data... + xorw %ax, %ax + movw %ax, %ds + ldsw (4 * 0x46), %si + popw %cx + popw %es + movw $0x0090, %di + rep + movsb +# Check that there IS a hd1 :-) + movw $0x01500, %ax + movb $0x81, %dl + int $0x13 + jc no_disk1 + + cmpb $3, %ah + je is_disk1 + +no_disk1: + movw %cs, %ax # aka SETUPSEG + subw $DELTA_INITSEG, %ax # aka INITSEG + movw %ax, %es + movw $0x0090, %di + movw $0x10, %cx + xorw %ax, %ax + cld + rep + stosb +is_disk1: + +# Check for PS/2 pointing device + movw %cs, %ax # aka SETUPSEG + subw $DELTA_INITSEG, %ax # aka INITSEG + movw %ax, %ds + movw $0, (0x1ff) # default is no pointing device + int $0x11 # int 0x11: equipment list + testb $0x04, %al # check if mouse installed + jz no_psmouse + + movw $0xAA, (0x1ff) # device present +no_psmouse: + +#include "../../i386/boot/edd.S" + +# Now we want to move to protected mode ... + cmpw $0, %cs:realmode_swtch + jz rmodeswtch_normal + + lcall *%cs:realmode_swtch + + jmp rmodeswtch_end + +rmodeswtch_normal: + pushw %cs + call default_switch + +rmodeswtch_end: +# we get the code32 start address and modify the below 'jmpi' +# (loader may have changed it) + movl %cs:code32_start, %eax + movl %eax, %cs:code32 + +# Now we move the system to its rightful place ... but we check if we have a +# big-kernel. In that case we *must* not move it ... + testb $LOADED_HIGH, %cs:loadflags + jz do_move0 # .. then we have a normal low + # loaded zImage + # .. or else we have a high + # loaded bzImage + jmp end_move # ... and we skip moving + +do_move0: + movw $0x100, %ax # start of destination segment + movw %cs, %bp # aka SETUPSEG + subw $DELTA_INITSEG, %bp # aka INITSEG + movw %cs:start_sys_seg, %bx # start of source segment + cld +do_move: + movw %ax, %es # destination segment + incb %ah # instead of add ax,#0x100 + movw %bx, %ds # source segment + addw $0x100, %bx + subw %di, %di + subw %si, %si + movw $0x800, %cx + rep + movsw + cmpw %bp, %bx # assume start_sys_seg > 0x200, + # so we will perhaps read one + # page more than needed, but + # never overwrite INITSEG + # because destination is a + # minimum one page below source + jb do_move + +end_move: +# then we load the segment descriptors + movw %cs, %ax # aka SETUPSEG + movw %ax, %ds + +# Check whether we need to be downward compatible with version <=201 + cmpl $0, cmd_line_ptr + jne end_move_self # loader uses version >=202 features + cmpb $0x20, type_of_loader + je end_move_self # bootsect loader, we know of it + +# Boot loader doesnt support boot protocol version 2.02. +# If we have our code not at 0x90000, we need to move it there now. +# We also then need to move the params behind it (commandline) +# Because we would overwrite the code on the current IP, we move +# it in two steps, jumping high after the first one. + movw %cs, %ax + cmpw $SETUPSEG, %ax + je end_move_self + + cli # make sure we really have + # interrupts disabled ! + # because after this the stack + # should not be used + subw $DELTA_INITSEG, %ax # aka INITSEG + movw %ss, %dx + cmpw %ax, %dx + jb move_self_1 + + addw $INITSEG, %dx + subw %ax, %dx # this will go into %ss after + # the move +move_self_1: + movw %ax, %ds + movw $INITSEG, %ax # real INITSEG + movw %ax, %es + movw %cs:setup_move_size, %cx + std # we have to move up, so we use + # direction down because the + # areas may overlap + movw %cx, %di + decw %di + movw %di, %si + subw $move_self_here+0x200, %cx + rep + movsb + ljmp $SETUPSEG, $move_self_here + +move_self_here: + movw $move_self_here+0x200, %cx + rep + movsb + movw $SETUPSEG, %ax + movw %ax, %ds + movw %dx, %ss +end_move_self: # now we are at the right place + lidt idt_48 # load idt with 0,0 + xorl %eax, %eax # Compute gdt_base + movw %ds, %ax # (Convert %ds:gdt to a linear ptr) + shll $4, %eax + addl $gdt, %eax + movl %eax, (gdt_48+2) + lgdt gdt_48 # load gdt with whatever is + # appropriate + +# that was painless, now we enable a20 + call empty_8042 + + movb $0xD1, %al # command write + outb %al, $0x64 + call empty_8042 + + movb $0xDF, %al # A20 on + outb %al, $0x60 + call empty_8042 + +# +# You must preserve the other bits here. Otherwise embarrasing things +# like laptops powering off on boot happen. Corrected version by Kira +# Brown from Linux 2.2 +# + inb $0x92, %al # + orb $02, %al # "fast A20" version + outb %al, $0x92 # some chips have only this + +# wait until a20 really *is* enabled; it can take a fair amount of +# time on certain systems; Toshiba Tecras are known to have this +# problem. The memory location used here (0x200) is the int 0x80 +# vector, which should be safe to use. + + xorw %ax, %ax # segment 0x0000 + movw %ax, %fs + decw %ax # segment 0xffff (HMA) + movw %ax, %gs +a20_wait: + incw %ax # unused memory location <0xfff0 + movw %ax, %fs:(0x200) # we use the "int 0x80" vector + cmpw %gs:(0x210), %ax # and its corresponding HMA addr + je a20_wait # loop until no longer aliased + +# make sure any possible coprocessor is properly reset.. + xorw %ax, %ax + outb %al, $0xf0 + call delay + + outb %al, $0xf1 + call delay + +# well, that went ok, I hope. Now we mask all interrupts - the rest +# is done in init_IRQ(). + movb $0xFF, %al # mask all interrupts for now + outb %al, $0xA1 + call delay + + movb $0xFB, %al # mask all irq's but irq2 which + outb %al, $0x21 # is cascaded + +# Well, that certainly wasn't fun :-(. Hopefully it works, and we don't +# need no steenking BIOS anyway (except for the initial loading :-). +# The BIOS-routine wants lots of unnecessary data, and it's less +# "interesting" anyway. This is how REAL programmers do it. +# +# Well, now's the time to actually move into protected mode. To make +# things as simple as possible, we do no register set-up or anything, +# we let the gnu-compiled 32-bit programs do that. We just jump to +# absolute address 0x1000 (or the loader supplied one), +# in 32-bit protected mode. +# +# Note that the short jump isn't strictly needed, although there are +# reasons why it might be a good idea. It won't hurt in any case. + movw $1, %ax # protected mode (PE) bit + lmsw %ax # This is it! + jmp flush_instr + +flush_instr: + xorw %bx, %bx # Flag to indicate a boot + xorl %esi, %esi # Pointer to real-mode code + movw %cs, %si + subw $DELTA_INITSEG, %si + shll $4, %esi # Convert to 32-bit pointer +# NOTE: For high loaded big kernels we need a +# jmpi 0x100000,__KERNEL_CS +# +# but we yet haven't reloaded the CS register, so the default size +# of the target offset still is 16 bit. +# However, using an operant prefix (0x66), the CPU will properly +# take our 48 bit far pointer. (INTeL 80386 Programmer's Reference +# Manual, Mixing 16-bit and 32-bit code, page 16-6) + + .byte 0x66, 0xea # prefix + jmpi-opcode +code32: .long 0x1000 # will be set to 0x100000 + # for big kernels + .word __KERNEL_CS + +# Here's a bunch of information about your current kernel.. +kernel_version: .ascii UTS_RELEASE + .ascii " (" + .ascii LINUX_COMPILE_BY + .ascii "@" + .ascii LINUX_COMPILE_HOST + .ascii ") " + .ascii UTS_VERSION + .byte 0 + +# This is the default real mode switch routine. +# to be called just before protected mode transition +default_switch: + cli # no interrupts allowed ! + movb $0x80, %al # disable NMI for bootup + # sequence + outb %al, $0x70 + lret + + +# This routine checks that the keyboard command queue is empty +# (after emptying the output buffers) +# +# Some machines have delusions that the keyboard buffer is always full +# with no keyboard attached... +# +# If there is no keyboard controller, we will usually get 0xff +# to all the reads. With each IO taking a microsecond and +# a timeout of 100,000 iterations, this can take about half a +# second ("delay" == outb to port 0x80). That should be ok, +# and should also be plenty of time for a real keyboard controller +# to empty. +# + +empty_8042: + pushl %ecx + movl $100000, %ecx + +empty_8042_loop: + decl %ecx + jz empty_8042_end_loop + + call delay + + inb $0x64, %al # 8042 status port + testb $1, %al # output buffer? + jz no_output + + call delay + inb $0x60, %al # read it + jmp empty_8042_loop + +no_output: + testb $2, %al # is input buffer full? + jnz empty_8042_loop # yes - loop +empty_8042_end_loop: + popl %ecx + ret + +# Read the cmos clock. Return the seconds in al +gettime: + pushw %cx + movb $0x02, %ah + int $0x1a + movb %dh, %al # %dh contains the seconds + andb $0x0f, %al + movb %dh, %ah + movb $0x04, %cl + shrb %cl, %ah + aad + popw %cx + ret + +# Delay is needed after doing I/O +delay: + outb %al,$0x80 + ret + +# Descriptor tables +gdt: + .word 0, 0, 0, 0 # dummy + + .word 0, 0, 0, 0 # unused + + .word 0xFFFF # 4Gb - (0x100000*0x1000 = 4Gb) + .word 0 # base address = 0 + .word 0x9A00 # code read/exec + .word 0x00CF # granularity = 4096, 386 + # (+5th nibble of limit) + + .word 0xFFFF # 4Gb - (0x100000*0x1000 = 4Gb) + .word 0 # base address = 0 + .word 0x9200 # data read/write + .word 0x00CF # granularity = 4096, 386 + # (+5th nibble of limit) +idt_48: + .word 0 # idt limit = 0 + .word 0, 0 # idt base = 0L +gdt_48: + .word 0x8000 # gdt limit=2048, + # 256 GDT entries + + .word 0, 0 # gdt base (filled in later) + +# Include video setup & detection code + +#include "video.S" + +# Setup signature -- must be last +setup_sig1: .word SIG1 +setup_sig2: .word SIG2 + +# After this point, there is some free space which is used by the video mode +# handling code to store the temporary mode table (not used by the kernel). + +modelist: + +.text +endtext: +.data +enddata: +.bss +endbss: diff --git a/arch/x86_64/boot/tools/build.c b/arch/x86_64/boot/tools/build.c new file mode 100644 index 0000000..c2fa663 --- /dev/null +++ b/arch/x86_64/boot/tools/build.c @@ -0,0 +1,186 @@ +/* + * $Id: build.c,v 1.3 2001/06/26 15:14:50 pavel Exp $ + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright (C) 1997 Martin Mares + */ + +/* + * This file builds a disk-image from three different files: + * + * - bootsect: exactly 512 bytes of 8086 machine code, loads the rest + * - setup: 8086 machine code, sets up system parm + * - system: 80386 code for actual system + * + * It does some checking that all files are of the correct type, and + * just writes the result to stdout, removing headers and padding to + * the right amount. It also writes some system data to stderr. + */ + +/* + * Changes by tytso to allow root device specification + * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996 + * Cross compiling fixes by Gertjan van Wingerde, July 1996 + * Rewritten by Martin Mares, April 1997 + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +typedef unsigned char byte; +typedef unsigned short word; +typedef unsigned long u32; + +#define DEFAULT_MAJOR_ROOT 0 +#define DEFAULT_MINOR_ROOT 0 + +/* Minimal number of setup sectors (see also bootsect.S) */ +#define SETUP_SECTS 4 + +byte buf[1024]; +int fd; +int is_big_kernel; + +void die(const char * str, ...) +{ + va_list args; + va_start(args, str); + vfprintf(stderr, str, args); + fputc('\n', stderr); + exit(1); +} + +void file_open(const char *name) +{ + if ((fd = open(name, O_RDONLY, 0)) < 0) + die("Unable to open `%s': %m", name); +} + +void usage(void) +{ + die("Usage: build [-b] bootsect setup system [rootdev] [> image]"); +} + +int main(int argc, char ** argv) +{ + unsigned int i, c, sz, setup_sectors; + u32 sys_size; + byte major_root, minor_root; + struct stat sb; + + if (argc > 2 && !strcmp(argv[1], "-b")) + { + is_big_kernel = 1; + argc--, argv++; + } + if ((argc < 4) || (argc > 5)) + usage(); + if (argc > 4) { + if (!strcmp(argv[4], "CURRENT")) { + if (stat("/", &sb)) { + perror("/"); + die("Couldn't stat /"); + } + major_root = major(sb.st_dev); + minor_root = minor(sb.st_dev); + } else if (strcmp(argv[4], "FLOPPY")) { + if (stat(argv[4], &sb)) { + perror(argv[4]); + die("Couldn't stat root device."); + } + major_root = major(sb.st_rdev); + minor_root = minor(sb.st_rdev); + } else { + major_root = 0; + minor_root = 0; + } + } else { + major_root = DEFAULT_MAJOR_ROOT; + minor_root = DEFAULT_MINOR_ROOT; + } + fprintf(stderr, "Root device is (%d, %d)\n", major_root, minor_root); + + file_open(argv[1]); + i = read(fd, buf, sizeof(buf)); + fprintf(stderr,"Boot sector %d bytes.\n",i); + if (i != 512) + die("Boot block must be exactly 512 bytes"); + if (buf[510] != 0x55 || buf[511] != 0xaa) + die("Boot block hasn't got boot flag (0xAA55)"); + buf[508] = minor_root; + buf[509] = major_root; + if (write(1, buf, 512) != 512) + die("Write call failed"); + close (fd); + + file_open(argv[2]); /* Copy the setup code */ + for (i=0 ; (c=read(fd, buf, sizeof(buf)))>0 ; i+=c ) + if (write(1, buf, c) != c) + die("Write call failed"); + if (c != 0) + die("read-error on `setup'"); + close (fd); + + setup_sectors = (i + 511) / 512; /* Pad unused space with zeros */ + /* for compatibility with ancient versions of LILO. */ + if (setup_sectors < SETUP_SECTS) + setup_sectors = SETUP_SECTS; + fprintf(stderr, "Setup is %d bytes.\n", i); + memset(buf, 0, sizeof(buf)); + while (i < setup_sectors * 512) { + c = setup_sectors * 512 - i; + if (c > sizeof(buf)) + c = sizeof(buf); + if (write(1, buf, c) != c) + die("Write call failed"); + i += c; + } + + file_open(argv[3]); + if (fstat (fd, &sb)) + die("Unable to stat `%s': %m", argv[3]); + sz = sb.st_size; + fprintf (stderr, "System is %d kB\n", sz/1024); + sys_size = (sz + 15) / 16; + /* 0x40000*16 = 4.0 MB, reasonable estimate for the current maximum */ + if (sys_size > (is_big_kernel ? 0x40000 : DEF_SYSSIZE)) + die("System is too big. Try using %smodules.", + is_big_kernel ? "" : "bzImage or "); + while (sz > 0) { + int l, n; + + l = (sz > sizeof(buf)) ? sizeof(buf) : sz; + if ((n=read(fd, buf, l)) != l) { + if (n < 0) + die("Error reading %s: %m", argv[3]); + else + die("%s: Unexpected EOF", argv[3]); + } + if (write(1, buf, l) != l) + die("Write failed"); + sz -= l; + } + close(fd); + + if (lseek(1, 497, SEEK_SET) != 497) /* Write sizes to the bootsector */ + die("Output: seek failed"); + buf[0] = setup_sectors; + if (write(1, buf, 1) != 1) + die("Write of setup sector count failed"); + if (lseek(1, 500, SEEK_SET) != 500) + die("Output: seek failed"); + buf[0] = (sys_size & 0xff); + buf[1] = ((sys_size >> 8) & 0xff); + if (write(1, buf, 2) != 2) + die("Write of image length failed"); + + return 0; /* Everything is OK */ +} diff --git a/arch/x86_64/boot/video.S b/arch/x86_64/boot/video.S new file mode 100644 index 0000000..0587477 --- /dev/null +++ b/arch/x86_64/boot/video.S @@ -0,0 +1,2007 @@ +/* video.S + * + * Display adapter & video mode setup, version 2.13 (14-May-99) + * + * Copyright (C) 1995 -- 1998 Martin Mares + * Based on the original setup.S code (C) Linus Torvalds and Mats Anderson + * + * Rewritten to use GNU 'as' by Chris Noe May 1999 + * + * For further information, look at Documentation/svga.txt. + * + */ + +#include /* for CONFIG_VIDEO_* */ + +/* Enable autodetection of SVGA adapters and modes. */ +#undef CONFIG_VIDEO_SVGA + +/* Enable autodetection of VESA modes */ +#define CONFIG_VIDEO_VESA + +/* Enable compacting of mode table */ +#define CONFIG_VIDEO_COMPACT + +/* Retain screen contents when switching modes */ +#define CONFIG_VIDEO_RETAIN + +/* Enable local mode list */ +#undef CONFIG_VIDEO_LOCAL + +/* Force 400 scan lines for standard modes (hack to fix bad BIOS behaviour */ +#undef CONFIG_VIDEO_400_HACK + +/* Hack that lets you force specific BIOS mode ID and specific dimensions */ +#undef CONFIG_VIDEO_GFX_HACK +#define VIDEO_GFX_BIOS_AX 0x4f02 /* 800x600 on ThinkPad */ +#define VIDEO_GFX_BIOS_BX 0x0102 +#define VIDEO_GFX_DUMMY_RESOLUTION 0x6425 /* 100x37 */ + +/* This code uses an extended set of video mode numbers. These include: + * Aliases for standard modes + * NORMAL_VGA (-1) + * EXTENDED_VGA (-2) + * ASK_VGA (-3) + * Video modes numbered by menu position -- NOT RECOMMENDED because of lack + * of compatibility when extending the table. These are between 0x00 and 0xff. + */ +#define VIDEO_FIRST_MENU 0x0000 + +/* Standard BIOS video modes (BIOS number + 0x0100) */ +#define VIDEO_FIRST_BIOS 0x0100 + +/* VESA BIOS video modes (VESA number + 0x0200) */ +#define VIDEO_FIRST_VESA 0x0200 + +/* Video7 special modes (BIOS number + 0x0900) */ +#define VIDEO_FIRST_V7 0x0900 + +/* Special video modes */ +#define VIDEO_FIRST_SPECIAL 0x0f00 +#define VIDEO_80x25 0x0f00 +#define VIDEO_8POINT 0x0f01 +#define VIDEO_80x43 0x0f02 +#define VIDEO_80x28 0x0f03 +#define VIDEO_CURRENT_MODE 0x0f04 +#define VIDEO_80x30 0x0f05 +#define VIDEO_80x34 0x0f06 +#define VIDEO_80x60 0x0f07 +#define VIDEO_GFX_HACK 0x0f08 +#define VIDEO_LAST_SPECIAL 0x0f09 + +/* Video modes given by resolution */ +#define VIDEO_FIRST_RESOLUTION 0x1000 + +/* The "recalculate timings" flag */ +#define VIDEO_RECALC 0x8000 + +/* Positions of various video parameters passed to the kernel */ +/* (see also include/linux/tty.h) */ +#define PARAM_CURSOR_POS 0x00 +#define PARAM_VIDEO_PAGE 0x04 +#define PARAM_VIDEO_MODE 0x06 +#define PARAM_VIDEO_COLS 0x07 +#define PARAM_VIDEO_EGA_BX 0x0a +#define PARAM_VIDEO_LINES 0x0e +#define PARAM_HAVE_VGA 0x0f +#define PARAM_FONT_POINTS 0x10 + +#define PARAM_LFB_WIDTH 0x12 +#define PARAM_LFB_HEIGHT 0x14 +#define PARAM_LFB_DEPTH 0x16 +#define PARAM_LFB_BASE 0x18 +#define PARAM_LFB_SIZE 0x1c +#define PARAM_LFB_LINELENGTH 0x24 +#define PARAM_LFB_COLORS 0x26 +#define PARAM_VESAPM_SEG 0x2e +#define PARAM_VESAPM_OFF 0x30 +#define PARAM_LFB_PAGES 0x32 +#define PARAM_VESA_ATTRIB 0x34 + +/* Define DO_STORE according to CONFIG_VIDEO_RETAIN */ +#ifdef CONFIG_VIDEO_RETAIN +#define DO_STORE call store_screen +#else +#define DO_STORE +#endif /* CONFIG_VIDEO_RETAIN */ + +# This is the main entry point called by setup.S +# %ds *must* be pointing to the bootsector +video: pushw %ds # We use different segments + pushw %ds # FS contains original DS + popw %fs + pushw %cs # DS is equal to CS + popw %ds + pushw %cs # ES is equal to CS + popw %es + xorw %ax, %ax + movw %ax, %gs # GS is zero + cld + call basic_detect # Basic adapter type testing (EGA/VGA/MDA/CGA) +#ifdef CONFIG_VIDEO_SELECT + movw %fs:(0x01fa), %ax # User selected video mode + cmpw $ASK_VGA, %ax # Bring up the menu + jz vid2 + + call mode_set # Set the mode + jc vid1 + + leaw badmdt, %si # Invalid mode ID + call prtstr +vid2: call mode_menu +vid1: +#ifdef CONFIG_VIDEO_RETAIN + call restore_screen # Restore screen contents +#endif /* CONFIG_VIDEO_RETAIN */ + call store_edid +#endif /* CONFIG_VIDEO_SELECT */ + call mode_params # Store mode parameters + popw %ds # Restore original DS + ret + +# Detect if we have CGA, MDA, EGA or VGA and pass it to the kernel. +basic_detect: + movb $0, %fs:(PARAM_HAVE_VGA) + movb $0x12, %ah # Check EGA/VGA + movb $0x10, %bl + int $0x10 + movw %bx, %fs:(PARAM_VIDEO_EGA_BX) # Identifies EGA to the kernel + cmpb $0x10, %bl # No, it's a CGA/MDA/HGA card. + je basret + + incb adapter + movw $0x1a00, %ax # Check EGA or VGA? + int $0x10 + cmpb $0x1a, %al # 1a means VGA... + jne basret # anything else is EGA. + + incb %fs:(PARAM_HAVE_VGA) # We've detected a VGA + incb adapter +basret: ret + +# Store the video mode parameters for later usage by the kernel. +# This is done by asking the BIOS except for the rows/columns +# parameters in the default 80x25 mode -- these are set directly, +# because some very obscure BIOSes supply insane values. +mode_params: +#ifdef CONFIG_VIDEO_SELECT + cmpb $0, graphic_mode + jnz mopar_gr +#endif + movb $0x03, %ah # Read cursor position + xorb %bh, %bh + int $0x10 + movw %dx, %fs:(PARAM_CURSOR_POS) + movb $0x0f, %ah # Read page/mode/width + int $0x10 + movw %bx, %fs:(PARAM_VIDEO_PAGE) + movw %ax, %fs:(PARAM_VIDEO_MODE) # Video mode and screen width + cmpb $0x7, %al # MDA/HGA => segment differs + jnz mopar0 + + movw $0xb000, video_segment +mopar0: movw %gs:(0x485), %ax # Font size + movw %ax, %fs:(PARAM_FONT_POINTS) # (valid only on EGA/VGA) + movw force_size, %ax # Forced size? + orw %ax, %ax + jz mopar1 + + movb %ah, %fs:(PARAM_VIDEO_COLS) + movb %al, %fs:(PARAM_VIDEO_LINES) + ret + +mopar1: movb $25, %al + cmpb $0, adapter # If we are on CGA/MDA/HGA, the + jz mopar2 # screen must have 25 lines. + + movb %gs:(0x484), %al # On EGA/VGA, use the EGA+ BIOS + incb %al # location of max lines. +mopar2: movb %al, %fs:(PARAM_VIDEO_LINES) + ret + +#ifdef CONFIG_VIDEO_SELECT +# Fetching of VESA frame buffer parameters +mopar_gr: + leaw modelist+1024, %di + movb $0x23, %fs:(PARAM_HAVE_VGA) + movw 16(%di), %ax + movw %ax, %fs:(PARAM_LFB_LINELENGTH) + movw 18(%di), %ax + movw %ax, %fs:(PARAM_LFB_WIDTH) + movw 20(%di), %ax + movw %ax, %fs:(PARAM_LFB_HEIGHT) + movb 25(%di), %al + movb $0, %ah + movw %ax, %fs:(PARAM_LFB_DEPTH) + movb 29(%di), %al + movb $0, %ah + movw %ax, %fs:(PARAM_LFB_PAGES) + movl 40(%di), %eax + movl %eax, %fs:(PARAM_LFB_BASE) + movl 31(%di), %eax + movl %eax, %fs:(PARAM_LFB_COLORS) + movl 35(%di), %eax + movl %eax, %fs:(PARAM_LFB_COLORS+4) + movw 0(%di), %ax + movw %ax, %fs:(PARAM_VESA_ATTRIB) + +# get video mem size + leaw modelist+1024, %di + movw $0x4f00, %ax + int $0x10 + xorl %eax, %eax + movw 18(%di), %ax + movl %eax, %fs:(PARAM_LFB_SIZE) + +# switching the DAC to 8-bit is for <= 8 bpp only + movw %fs:(PARAM_LFB_DEPTH), %ax + cmpw $8, %ax + jg dac_done + +# get DAC switching capability + xorl %eax, %eax + movb 10(%di), %al + testb $1, %al + jz dac_set + +# attempt to switch DAC to 8-bit + movw $0x4f08, %ax + movw $0x0800, %bx + int $0x10 + cmpw $0x004f, %ax + jne dac_set + movb %bh, dac_size # store actual DAC size + +dac_set: +# set color size to DAC size + movb dac_size, %al + movb %al, %fs:(PARAM_LFB_COLORS+0) + movb %al, %fs:(PARAM_LFB_COLORS+2) + movb %al, %fs:(PARAM_LFB_COLORS+4) + movb %al, %fs:(PARAM_LFB_COLORS+6) + +# set color offsets to 0 + movb $0, %fs:(PARAM_LFB_COLORS+1) + movb $0, %fs:(PARAM_LFB_COLORS+3) + movb $0, %fs:(PARAM_LFB_COLORS+5) + movb $0, %fs:(PARAM_LFB_COLORS+7) + +dac_done: +# get protected mode interface informations + movw $0x4f0a, %ax + xorw %bx, %bx + xorw %di, %di + int $0x10 + cmp $0x004f, %ax + jnz no_pm + + movw %es, %fs:(PARAM_VESAPM_SEG) + movw %di, %fs:(PARAM_VESAPM_OFF) +no_pm: ret + +# The video mode menu +mode_menu: + leaw keymsg, %si # "Return/Space/Timeout" message + call prtstr + call flush +nokey: call getkt + + cmpb $0x0d, %al # ENTER ? + je listm # yes - manual mode selection + + cmpb $0x20, %al # SPACE ? + je defmd1 # no - repeat + + call beep + jmp nokey + +defmd1: ret # No mode chosen? Default 80x25 + +listm: call mode_table # List mode table +listm0: leaw name_bann, %si # Print adapter name + call prtstr + movw card_name, %si + orw %si, %si + jnz an2 + + movb adapter, %al + leaw old_name, %si + orb %al, %al + jz an1 + + leaw ega_name, %si + decb %al + jz an1 + + leaw vga_name, %si + jmp an1 + +an2: call prtstr + leaw svga_name, %si +an1: call prtstr + leaw listhdr, %si # Table header + call prtstr + movb $0x30, %dl # DL holds mode number + leaw modelist, %si +lm1: cmpw $ASK_VGA, (%si) # End? + jz lm2 + + movb %dl, %al # Menu selection number + call prtchr + call prtsp2 + lodsw + call prthw # Mode ID + call prtsp2 + movb 0x1(%si), %al + call prtdec # Rows + movb $0x78, %al # the letter 'x' + call prtchr + lodsw + call prtdec # Columns + movb $0x0d, %al # New line + call prtchr + movb $0x0a, %al + call prtchr + incb %dl # Next character + cmpb $0x3a, %dl + jnz lm1 + + movb $0x61, %dl + jmp lm1 + +lm2: leaw prompt, %si # Mode prompt + call prtstr + leaw edit_buf, %di # Editor buffer +lm3: call getkey + cmpb $0x0d, %al # Enter? + jz lment + + cmpb $0x08, %al # Backspace? + jz lmbs + + cmpb $0x20, %al # Printable? + jc lm3 + + cmpw $edit_buf+4, %di # Enough space? + jz lm3 + + stosb + call prtchr + jmp lm3 + +lmbs: cmpw $edit_buf, %di # Backspace + jz lm3 + + decw %di + movb $0x08, %al + call prtchr + call prtspc + movb $0x08, %al + call prtchr + jmp lm3 + +lment: movb $0, (%di) + leaw crlft, %si + call prtstr + leaw edit_buf, %si + cmpb $0, (%si) # Empty string = default mode + jz lmdef + + cmpb $0, 1(%si) # One character = menu selection + jz mnusel + + cmpw $0x6373, (%si) # "scan" => mode scanning + jnz lmhx + + cmpw $0x6e61, 2(%si) + jz lmscan + +lmhx: xorw %bx, %bx # Else => mode ID in hex +lmhex: lodsb + orb %al, %al + jz lmuse1 + + subb $0x30, %al + jc lmbad + + cmpb $10, %al + jc lmhx1 + + subb $7, %al + andb $0xdf, %al + cmpb $10, %al + jc lmbad + + cmpb $16, %al + jnc lmbad + +lmhx1: shlw $4, %bx + orb %al, %bl + jmp lmhex + +lmuse1: movw %bx, %ax + jmp lmuse + +mnusel: lodsb # Menu selection + xorb %ah, %ah + subb $0x30, %al + jc lmbad + + cmpb $10, %al + jc lmuse + + cmpb $0x61-0x30, %al + jc lmbad + + subb $0x61-0x30-10, %al + cmpb $36, %al + jnc lmbad + +lmuse: call mode_set + jc lmdef + +lmbad: leaw unknt, %si + call prtstr + jmp lm2 +lmscan: cmpb $0, adapter # Scanning only on EGA/VGA + jz lmbad + + movw $0, mt_end # Scanning of modes is + movb $1, scanning # done as new autodetection. + call mode_table + jmp listm0 +lmdef: ret + +# Additional parts of mode_set... (relative jumps, you know) +setv7: # Video7 extended modes + DO_STORE + subb $VIDEO_FIRST_V7>>8, %bh + movw $0x6f05, %ax + int $0x10 + stc + ret + +_setrec: jmp setrec # Ugly... +_set_80x25: jmp set_80x25 + +# Aliases for backward compatibility. +setalias: + movw $VIDEO_80x25, %ax + incw %bx + jz mode_set + + movb $VIDEO_8POINT-VIDEO_FIRST_SPECIAL, %al + incw %bx + jnz setbad # Fall-through! + +# Setting of user mode (AX=mode ID) => CF=success +mode_set: + movw %ax, %fs:(0x01fa) # Store mode for use in acpi_wakeup.S + movw %ax, %bx + cmpb $0xff, %ah + jz setalias + + testb $VIDEO_RECALC>>8, %ah + jnz _setrec + + cmpb $VIDEO_FIRST_RESOLUTION>>8, %ah + jnc setres + + cmpb $VIDEO_FIRST_SPECIAL>>8, %ah + jz setspc + + cmpb $VIDEO_FIRST_V7>>8, %ah + jz setv7 + + cmpb $VIDEO_FIRST_VESA>>8, %ah + jnc check_vesa + + orb %ah, %ah + jz setmenu + + decb %ah + jz setbios + +setbad: clc + movb $0, do_restore # The screen needn't be restored + ret + +setvesa: + DO_STORE + subb $VIDEO_FIRST_VESA>>8, %bh + movw $0x4f02, %ax # VESA BIOS mode set call + int $0x10 + cmpw $0x004f, %ax # AL=4f if implemented + jnz setbad # AH=0 if OK + + stc + ret + +setbios: + DO_STORE + int $0x10 # Standard BIOS mode set call + pushw %bx + movb $0x0f, %ah # Check if really set + int $0x10 + popw %bx + cmpb %bl, %al + jnz setbad + + stc + ret + +setspc: xorb %bh, %bh # Set special mode + cmpb $VIDEO_LAST_SPECIAL-VIDEO_FIRST_SPECIAL, %bl + jnc setbad + + addw %bx, %bx + jmp *spec_inits(%bx) + +setmenu: + orb %al, %al # 80x25 is an exception + jz _set_80x25 + + pushw %bx # Set mode chosen from menu + call mode_table # Build the mode table + popw %ax + shlw $2, %ax + addw %ax, %si + cmpw %di, %si + jnc setbad + + movw (%si), %ax # Fetch mode ID +_m_s: jmp mode_set + +setres: pushw %bx # Set mode chosen by resolution + call mode_table + popw %bx + xchgb %bl, %bh +setr1: lodsw + cmpw $ASK_VGA, %ax # End of the list? + jz setbad + + lodsw + cmpw %bx, %ax + jnz setr1 + + movw -4(%si), %ax # Fetch mode ID + jmp _m_s + +check_vesa: + leaw modelist+1024, %di + subb $VIDEO_FIRST_VESA>>8, %bh + movw %bx, %cx # Get mode information structure + movw $0x4f01, %ax + int $0x10 + addb $VIDEO_FIRST_VESA>>8, %bh + cmpw $0x004f, %ax + jnz setbad + + movb (%di), %al # Check capabilities. + andb $0x19, %al + cmpb $0x09, %al + jz setvesa # This is a text mode + + movb (%di), %al # Check capabilities. + andb $0x99, %al + cmpb $0x99, %al + jnz _setbad # Doh! No linear frame buffer. + + subb $VIDEO_FIRST_VESA>>8, %bh + orw $0x4000, %bx # Use linear frame buffer + movw $0x4f02, %ax # VESA BIOS mode set call + int $0x10 + cmpw $0x004f, %ax # AL=4f if implemented + jnz _setbad # AH=0 if OK + + movb $1, graphic_mode # flag graphic mode + movb $0, do_restore # no screen restore + stc + ret + +_setbad: jmp setbad # Ugly... + +# Recalculate vertical display end registers -- this fixes various +# inconsistencies of extended modes on many adapters. Called when +# the VIDEO_RECALC flag is set in the mode ID. + +setrec: subb $VIDEO_RECALC>>8, %ah # Set the base mode + call mode_set + jnc rct3 + + movw %gs:(0x485), %ax # Font size in pixels + movb %gs:(0x484), %bl # Number of rows + incb %bl + mulb %bl # Number of visible + decw %ax # scan lines - 1 + movw $0x3d4, %dx + movw %ax, %bx + movb $0x12, %al # Lower 8 bits + movb %bl, %ah + outw %ax, %dx + movb $0x07, %al # Bits 8 and 9 in the overflow register + call inidx + xchgb %al, %ah + andb $0xbd, %ah + shrb %bh + jnc rct1 + orb $0x02, %ah +rct1: shrb %bh + jnc rct2 + orb $0x40, %ah +rct2: movb $0x07, %al + outw %ax, %dx + stc +rct3: ret + +# Table of routines for setting of the special modes. +spec_inits: + .word set_80x25 + .word set_8pixel + .word set_80x43 + .word set_80x28 + .word set_current + .word set_80x30 + .word set_80x34 + .word set_80x60 + .word set_gfx + +# Set the 80x25 mode. If already set, do nothing. +set_80x25: + movw $0x5019, force_size # Override possibly broken BIOS +use_80x25: +#ifdef CONFIG_VIDEO_400_HACK + movw $0x1202, %ax # Force 400 scan lines + movb $0x30, %bl + int $0x10 +#else + movb $0x0f, %ah # Get current mode ID + int $0x10 + cmpw $0x5007, %ax # Mode 7 (80x25 mono) is the only one available + jz st80 # on CGA/MDA/HGA and is also available on EGAM + + cmpw $0x5003, %ax # Unknown mode, force 80x25 color + jnz force3 + +st80: cmpb $0, adapter # CGA/MDA/HGA => mode 3/7 is always 80x25 + jz set80 + + movb %gs:(0x0484), %al # This is EGA+ -- beware of 80x50 etc. + orb %al, %al # Some buggy BIOS'es set 0 rows + jz set80 + + cmpb $24, %al # It's hopefully correct + jz set80 +#endif /* CONFIG_VIDEO_400_HACK */ +force3: DO_STORE + movw $0x0003, %ax # Forced set + int $0x10 +set80: stc + ret + +# Set the 80x50/80x43 8-pixel mode. Simple BIOS calls. +set_8pixel: + DO_STORE + call use_80x25 # The base is 80x25 +set_8pt: + movw $0x1112, %ax # Use 8x8 font + xorb %bl, %bl + int $0x10 + movw $0x1200, %ax # Use alternate print screen + movb $0x20, %bl + int $0x10 + movw $0x1201, %ax # Turn off cursor emulation + movb $0x34, %bl + int $0x10 + movb $0x01, %ah # Define cursor scan lines 6-7 + movw $0x0607, %cx + int $0x10 +set_current: + stc + ret + +# Set the 80x28 mode. This mode works on all VGA's, because it's a standard +# 80x25 mode with 14-point fonts instead of 16-point. +set_80x28: + DO_STORE + call use_80x25 # The base is 80x25 +set14: movw $0x1111, %ax # Use 9x14 font + xorb %bl, %bl + int $0x10 + movb $0x01, %ah # Define cursor scan lines 11-12 + movw $0x0b0c, %cx + int $0x10 + stc + ret + +# Set the 80x43 mode. This mode is works on all VGA's. +# It's a 350-scanline mode with 8-pixel font. +set_80x43: + DO_STORE + movw $0x1201, %ax # Set 350 scans + movb $0x30, %bl + int $0x10 + movw $0x0003, %ax # Reset video mode + int $0x10 + jmp set_8pt # Use 8-pixel font + +# Set the 80x30 mode (all VGA's). 480 scanlines, 16-pixel font. +set_80x30: + call use_80x25 # Start with real 80x25 + DO_STORE + movw $0x3cc, %dx # Get CRTC port + inb %dx, %al + movb $0xd4, %dl + rorb %al # Mono or color? + jc set48a + + movb $0xb4, %dl +set48a: movw $0x0c11, %ax # Vertical sync end (also unlocks CR0-7) + call outidx + movw $0x0b06, %ax # Vertical total + call outidx + movw $0x3e07, %ax # (Vertical) overflow + call outidx + movw $0xea10, %ax # Vertical sync start + call outidx + movw $0xdf12, %ax # Vertical display end + call outidx + movw $0xe715, %ax # Vertical blank start + call outidx + movw $0x0416, %ax # Vertical blank end + call outidx + pushw %dx + movb $0xcc, %dl # Misc output register (read) + inb %dx, %al + movb $0xc2, %dl # (write) + andb $0x0d, %al # Preserve clock select bits and color bit + orb $0xe2, %al # Set correct sync polarity + outb %al, %dx + popw %dx + movw $0x501e, force_size + stc # That's all. + ret + +# Set the 80x34 mode (all VGA's). 480 scans, 14-pixel font. +set_80x34: + call set_80x30 # Set 480 scans + call set14 # And 14-pt font + movw $0xdb12, %ax # VGA vertical display end + movw $0x5022, force_size +setvde: call outidx + stc + ret + +# Set the 80x60 mode (all VGA's). 480 scans, 8-pixel font. +set_80x60: + call set_80x30 # Set 480 scans + call set_8pt # And 8-pt font + movw $0xdf12, %ax # VGA vertical display end + movw $0x503c, force_size + jmp setvde + +# Special hack for ThinkPad graphics +set_gfx: +#ifdef CONFIG_VIDEO_GFX_HACK + movw $VIDEO_GFX_BIOS_AX, %ax + movw $VIDEO_GFX_BIOS_BX, %bx + int $0x10 + movw $VIDEO_GFX_DUMMY_RESOLUTION, force_size + stc +#endif + ret + +#ifdef CONFIG_VIDEO_RETAIN + +# Store screen contents to temporary buffer. +store_screen: + cmpb $0, do_restore # Already stored? + jnz stsr + + testb $CAN_USE_HEAP, loadflags # Have we space for storing? + jz stsr + + pushw %ax + pushw %bx + pushw force_size # Don't force specific size + movw $0, force_size + call mode_params # Obtain params of current mode + popw force_size + movb %fs:(PARAM_VIDEO_LINES), %ah + movb %fs:(PARAM_VIDEO_COLS), %al + movw %ax, %bx # BX=dimensions + mulb %ah + movw %ax, %cx # CX=number of characters + addw %ax, %ax # Calculate image size + addw $modelist+1024+4, %ax + cmpw heap_end_ptr, %ax + jnc sts1 # Unfortunately, out of memory + + movw %fs:(PARAM_CURSOR_POS), %ax # Store mode params + leaw modelist+1024, %di + stosw + movw %bx, %ax + stosw + pushw %ds # Store the screen + movw video_segment, %ds + xorw %si, %si + rep + movsw + popw %ds + incb do_restore # Screen will be restored later +sts1: popw %bx + popw %ax +stsr: ret + +# Restore screen contents from temporary buffer. +restore_screen: + cmpb $0, do_restore # Has the screen been stored? + jz res1 + + call mode_params # Get parameters of current mode + movb %fs:(PARAM_VIDEO_LINES), %cl + movb %fs:(PARAM_VIDEO_COLS), %ch + leaw modelist+1024, %si # Screen buffer + lodsw # Set cursor position + movw %ax, %dx + cmpb %cl, %dh + jc res2 + + movb %cl, %dh + decb %dh +res2: cmpb %ch, %dl + jc res3 + + movb %ch, %dl + decb %dl +res3: movb $0x02, %ah + movb $0x00, %bh + int $0x10 + lodsw # Display size + movb %ah, %dl # DL=number of lines + movb $0, %ah # BX=phys. length of orig. line + movw %ax, %bx + cmpb %cl, %dl # Too many? + jc res4 + + pushw %ax + movb %dl, %al + subb %cl, %al + mulb %bl + addw %ax, %si + addw %ax, %si + popw %ax + movb %cl, %dl +res4: cmpb %ch, %al # Too wide? + jc res5 + + movb %ch, %al # AX=width of src. line +res5: movb $0, %cl + xchgb %ch, %cl + movw %cx, %bp # BP=width of dest. line + pushw %es + movw video_segment, %es + xorw %di, %di # Move the data + addw %bx, %bx # Convert BX and BP to _bytes_ + addw %bp, %bp +res6: pushw %si + pushw %di + movw %ax, %cx + rep + movsw + popw %di + popw %si + addw %bp, %di + addw %bx, %si + decb %dl + jnz res6 + + popw %es # Done +res1: ret +#endif /* CONFIG_VIDEO_RETAIN */ + +# Write to indexed VGA register (AL=index, AH=data, DX=index reg. port) +outidx: outb %al, %dx + pushw %ax + movb %ah, %al + incw %dx + outb %al, %dx + decw %dx + popw %ax + ret + +# Build the table of video modes (stored after the setup.S code at the +# `modelist' label. Each video mode record looks like: +# .word MODE-ID (our special mode ID (see above)) +# .byte rows (number of rows) +# .byte columns (number of columns) +# Returns address of the end of the table in DI, the end is marked +# with a ASK_VGA ID. +mode_table: + movw mt_end, %di # Already filled? + orw %di, %di + jnz mtab1x + + leaw modelist, %di # Store standard modes: + movl $VIDEO_80x25 + 0x50190000, %eax # The 80x25 mode (ALL) + stosl + movb adapter, %al # CGA/MDA/HGA -- no more modes + orb %al, %al + jz mtabe + + decb %al + jnz mtabv + + movl $VIDEO_8POINT + 0x502b0000, %eax # The 80x43 EGA mode + stosl + jmp mtabe + +mtab1x: jmp mtab1 + +mtabv: leaw vga_modes, %si # All modes for std VGA + movw $vga_modes_end-vga_modes, %cx + rep # I'm unable to use movsw as I don't know how to store a half + movsb # of the expression above to cx without using explicit shr. + + cmpb $0, scanning # Mode scan requested? + jz mscan1 + + call mode_scan +mscan1: + +#ifdef CONFIG_VIDEO_LOCAL + call local_modes +#endif /* CONFIG_VIDEO_LOCAL */ + +#ifdef CONFIG_VIDEO_VESA + call vesa_modes # Detect VESA VGA modes +#endif /* CONFIG_VIDEO_VESA */ + +#ifdef CONFIG_VIDEO_SVGA + cmpb $0, scanning # Bypass when scanning + jnz mscan2 + + call svga_modes # Detect SVGA cards & modes +mscan2: +#endif /* CONFIG_VIDEO_SVGA */ + +mtabe: + +#ifdef CONFIG_VIDEO_COMPACT + leaw modelist, %si + movw %di, %dx + movw %si, %di +cmt1: cmpw %dx, %si # Scan all modes + jz cmt2 + + leaw modelist, %bx # Find in previous entries + movw 2(%si), %cx +cmt3: cmpw %bx, %si + jz cmt4 + + cmpw 2(%bx), %cx # Found => don't copy this entry + jz cmt5 + + addw $4, %bx + jmp cmt3 + +cmt4: movsl # Copy entry + jmp cmt1 + +cmt5: addw $4, %si # Skip entry + jmp cmt1 + +cmt2: +#endif /* CONFIG_VIDEO_COMPACT */ + + movw $ASK_VGA, (%di) # End marker + movw %di, mt_end +mtab1: leaw modelist, %si # SI=mode list, DI=list end +ret0: ret + +# Modes usable on all standard VGAs +vga_modes: + .word VIDEO_8POINT + .word 0x5032 # 80x50 + .word VIDEO_80x43 + .word 0x502b # 80x43 + .word VIDEO_80x28 + .word 0x501c # 80x28 + .word VIDEO_80x30 + .word 0x501e # 80x30 + .word VIDEO_80x34 + .word 0x5022 # 80x34 + .word VIDEO_80x60 + .word 0x503c # 80x60 +#ifdef CONFIG_VIDEO_GFX_HACK + .word VIDEO_GFX_HACK + .word VIDEO_GFX_DUMMY_RESOLUTION +#endif + +vga_modes_end: +# Detect VESA modes. + +#ifdef CONFIG_VIDEO_VESA +vesa_modes: + cmpb $2, adapter # VGA only + jnz ret0 + + movw %di, %bp # BP=original mode table end + addw $0x200, %di # Buffer space + movw $0x4f00, %ax # VESA Get card info call + int $0x10 + movw %bp, %di + cmpw $0x004f, %ax # Successful? + jnz ret0 + + cmpw $0x4556, 0x200(%di) + jnz ret0 + + cmpw $0x4153, 0x202(%di) + jnz ret0 + + movw $vesa_name, card_name # Set name to "VESA VGA" + pushw %gs + lgsw 0x20e(%di), %si # GS:SI=mode list + movw $128, %cx # Iteration limit +vesa1: +# gas version 2.9.1, using BFD version 2.9.1.0.23 buggers the next inst. +# XXX: lodsw %gs:(%si), %ax # Get next mode in the list + gs; lodsw + cmpw $0xffff, %ax # End of the table? + jz vesar + + cmpw $0x0080, %ax # Check validity of mode ID + jc vesa2 + + orb %ah, %ah # Valid IDs: 0x0000-0x007f/0x0100-0x07ff + jz vesan # Certain BIOSes report 0x80-0xff! + + cmpw $0x0800, %ax + jnc vesae + +vesa2: pushw %cx + movw %ax, %cx # Get mode information structure + movw $0x4f01, %ax + int $0x10 + movw %cx, %bx # BX=mode number + addb $VIDEO_FIRST_VESA>>8, %bh + popw %cx + cmpw $0x004f, %ax + jnz vesan # Don't report errors (buggy BIOSES) + + movb (%di), %al # Check capabilities. We require + andb $0x19, %al # a color text mode. + cmpb $0x09, %al + jnz vesan + + cmpw $0xb800, 8(%di) # Standard video memory address required + jnz vesan + + testb $2, (%di) # Mode characteristics supplied? + movw %bx, (%di) # Store mode number + jz vesa3 + + xorw %dx, %dx + movw 0x12(%di), %bx # Width + orb %bh, %bh + jnz vesan + + movb %bl, 0x3(%di) + movw 0x14(%di), %ax # Height + orb %ah, %ah + jnz vesan + + movb %al, 2(%di) + mulb %bl + cmpw $8193, %ax # Small enough for Linux console driver? + jnc vesan + + jmp vesaok + +vesa3: subw $0x8108, %bx # This mode has no detailed info specified, + jc vesan # so it must be a standard VESA mode. + + cmpw $5, %bx + jnc vesan + + movw vesa_text_mode_table(%bx), %ax + movw %ax, 2(%di) +vesaok: addw $4, %di # The mode is valid. Store it. +vesan: loop vesa1 # Next mode. Limit exceeded => error +vesae: leaw vesaer, %si + call prtstr + movw %bp, %di # Discard already found modes. +vesar: popw %gs + ret + +# Dimensions of standard VESA text modes +vesa_text_mode_table: + .byte 60, 80 # 0108 + .byte 25, 132 # 0109 + .byte 43, 132 # 010A + .byte 50, 132 # 010B + .byte 60, 132 # 010C +#endif /* CONFIG_VIDEO_VESA */ + +# Scan for video modes. A bit dirty, but should work. +mode_scan: + movw $0x0100, %cx # Start with mode 0 +scm1: movb $0, %ah # Test the mode + movb %cl, %al + int $0x10 + movb $0x0f, %ah + int $0x10 + cmpb %cl, %al + jnz scm2 # Mode not set + + movw $0x3c0, %dx # Test if it's a text mode + movb $0x10, %al # Mode bits + call inidx + andb $0x03, %al + jnz scm2 + + movb $0xce, %dl # Another set of mode bits + movb $0x06, %al + call inidx + shrb %al + jc scm2 + + movb $0xd4, %dl # Cursor location + movb $0x0f, %al + call inidx + orb %al, %al + jnz scm2 + + movw %cx, %ax # Ok, store the mode + stosw + movb %gs:(0x484), %al # Number of rows + incb %al + stosb + movw %gs:(0x44a), %ax # Number of columns + stosb +scm2: incb %cl + jns scm1 + + movw $0x0003, %ax # Return back to mode 3 + int $0x10 + ret + +tstidx: outw %ax, %dx # OUT DX,AX and inidx +inidx: outb %al, %dx # Read from indexed VGA register + incw %dx # AL=index, DX=index reg port -> AL=data + inb %dx, %al + decw %dx + ret + +# Try to detect type of SVGA card and supply (usually approximate) video +# mode table for it. + +#ifdef CONFIG_VIDEO_SVGA +svga_modes: + leaw svga_table, %si # Test all known SVGA adapters +dosvga: lodsw + movw %ax, %bp # Default mode table + orw %ax, %ax + jz didsv1 + + lodsw # Pointer to test routine + pushw %si + pushw %di + pushw %es + movw $0xc000, %bx + movw %bx, %es + call *%ax # Call test routine + popw %es + popw %di + popw %si + orw %bp, %bp + jz dosvga + + movw %bp, %si # Found, copy the modes + movb svga_prefix, %ah +cpsvga: lodsb + orb %al, %al + jz didsv + + stosw + movsw + jmp cpsvga + +didsv: movw %si, card_name # Store pointer to card name +didsv1: ret + +# Table of all known SVGA cards. For each card, we store a pointer to +# a table of video modes supported by the card and a pointer to a routine +# used for testing of presence of the card. The video mode table is always +# followed by the name of the card or the chipset. +svga_table: + .word ati_md, ati_test + .word oak_md, oak_test + .word paradise_md, paradise_test + .word realtek_md, realtek_test + .word s3_md, s3_test + .word chips_md, chips_test + .word video7_md, video7_test + .word cirrus5_md, cirrus5_test + .word cirrus6_md, cirrus6_test + .word cirrus1_md, cirrus1_test + .word ahead_md, ahead_test + .word everex_md, everex_test + .word genoa_md, genoa_test + .word trident_md, trident_test + .word tseng_md, tseng_test + .word 0 + +# Test routines and mode tables: + +# S3 - The test algorithm was taken from the SuperProbe package +# for XFree86 1.2.1. Report bugs to Christoph.Niemann@linux.org +s3_test: + movw $0x0f35, %cx # we store some constants in cl/ch + movw $0x03d4, %dx + movb $0x38, %al + call inidx + movb %al, %bh # store current CRT-register 0x38 + movw $0x0038, %ax + call outidx # disable writing to special regs + movb %cl, %al # check whether we can write special reg 0x35 + call inidx + movb %al, %bl # save the current value of CRT reg 0x35 + andb $0xf0, %al # clear bits 0-3 + movb %al, %ah + movb %cl, %al # and write it to CRT reg 0x35 + call outidx + call inidx # now read it back + andb %ch, %al # clear the upper 4 bits + jz s3_2 # the first test failed. But we have a + + movb %bl, %ah # second chance + movb %cl, %al + call outidx + jmp s3_1 # do the other tests + +s3_2: movw %cx, %ax # load ah with 0xf and al with 0x35 + orb %bl, %ah # set the upper 4 bits of ah with the orig value + call outidx # write ... + call inidx # ... and reread + andb %cl, %al # turn off the upper 4 bits + pushw %ax + movb %bl, %ah # restore old value in register 0x35 + movb %cl, %al + call outidx + popw %ax + cmpb %ch, %al # setting lower 4 bits was successful => bad + je no_s3 # writing is allowed => this is not an S3 + +s3_1: movw $0x4838, %ax # allow writing to special regs by putting + call outidx # magic number into CRT-register 0x38 + movb %cl, %al # check whether we can write special reg 0x35 + call inidx + movb %al, %bl + andb $0xf0, %al + movb %al, %ah + movb %cl, %al + call outidx + call inidx + andb %ch, %al + jnz no_s3 # no, we can't write => no S3 + + movw %cx, %ax + orb %bl, %ah + call outidx + call inidx + andb %ch, %al + pushw %ax + movb %bl, %ah # restore old value in register 0x35 + movb %cl, %al + call outidx + popw %ax + cmpb %ch, %al + jne no_s31 # writing not possible => no S3 + movb $0x30, %al + call inidx # now get the S3 id ... + leaw idS3, %di + movw $0x10, %cx + repne + scasb + je no_s31 + + movb %bh, %ah + movb $0x38, %al + jmp s3rest + +no_s3: movb $0x35, %al # restore CRT register 0x35 + movb %bl, %ah + call outidx +no_s31: xorw %bp, %bp # Detection failed +s3rest: movb %bh, %ah + movb $0x38, %al # restore old value of CRT register 0x38 + jmp outidx + +idS3: .byte 0x81, 0x82, 0x90, 0x91, 0x92, 0x93, 0x94, 0x95 + .byte 0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa8, 0xb0 + +s3_md: .byte 0x54, 0x2b, 0x84 + .byte 0x55, 0x19, 0x84 + .byte 0 + .ascii "S3" + .byte 0 + +# ATI cards. +ati_test: + leaw idati, %si + movw $0x31, %di + movw $0x09, %cx + repe + cmpsb + je atiok + + xorw %bp, %bp +atiok: ret + +idati: .ascii "761295520" + +ati_md: .byte 0x23, 0x19, 0x84 + .byte 0x33, 0x2c, 0x84 + .byte 0x22, 0x1e, 0x64 + .byte 0x21, 0x19, 0x64 + .byte 0x58, 0x21, 0x50 + .byte 0x5b, 0x1e, 0x50 + .byte 0 + .ascii "ATI" + .byte 0 + +# AHEAD +ahead_test: + movw $0x200f, %ax + movw $0x3ce, %dx + outw %ax, %dx + incw %dx + inb %dx, %al + cmpb $0x20, %al + je isahed + + cmpb $0x21, %al + je isahed + + xorw %bp, %bp +isahed: ret + +ahead_md: + .byte 0x22, 0x2c, 0x84 + .byte 0x23, 0x19, 0x84 + .byte 0x24, 0x1c, 0x84 + .byte 0x2f, 0x32, 0xa0 + .byte 0x32, 0x22, 0x50 + .byte 0x34, 0x42, 0x50 + .byte 0 + .ascii "Ahead" + .byte 0 + +# Chips & Tech. +chips_test: + movw $0x3c3, %dx + inb %dx, %al + orb $0x10, %al + outb %al, %dx + movw $0x104, %dx + inb %dx, %al + movb %al, %bl + movw $0x3c3, %dx + inb %dx, %al + andb $0xef, %al + outb %al, %dx + cmpb $0xa5, %bl + je cantok + + xorw %bp, %bp +cantok: ret + +chips_md: + .byte 0x60, 0x19, 0x84 + .byte 0x61, 0x32, 0x84 + .byte 0 + .ascii "Chips & Technologies" + .byte 0 + +# Cirrus Logic 5X0 +cirrus1_test: + movw $0x3d4, %dx + movb $0x0c, %al + outb %al, %dx + incw %dx + inb %dx, %al + movb %al, %bl + xorb %al, %al + outb %al, %dx + decw %dx + movb $0x1f, %al + outb %al, %dx + incw %dx + inb %dx, %al + movb %al, %bh + xorb %ah, %ah + shlb $4, %al + movw %ax, %cx + movb %bh, %al + shrb $4, %al + addw %ax, %cx + shlw $8, %cx + addw $6, %cx + movw %cx, %ax + movw $0x3c4, %dx + outw %ax, %dx + incw %dx + inb %dx, %al + andb %al, %al + jnz nocirr + + movb %bh, %al + outb %al, %dx + inb %dx, %al + cmpb $0x01, %al + je iscirr + +nocirr: xorw %bp, %bp +iscirr: movw $0x3d4, %dx + movb %bl, %al + xorb %ah, %ah + shlw $8, %ax + addw $0x0c, %ax + outw %ax, %dx + ret + +cirrus1_md: + .byte 0x1f, 0x19, 0x84 + .byte 0x20, 0x2c, 0x84 + .byte 0x22, 0x1e, 0x84 + .byte 0x31, 0x25, 0x64 + .byte 0 + .ascii "Cirrus Logic 5X0" + .byte 0 + +# Cirrus Logic 54XX +cirrus5_test: + movw $0x3c4, %dx + movb $6, %al + call inidx + movb %al, %bl # BL=backup + movw $6, %ax + call tstidx + cmpb $0x0f, %al + jne c5fail + + movw $0x1206, %ax + call tstidx + cmpb $0x12, %al + jne c5fail + + movb $0x1e, %al + call inidx + movb %al, %bh + movb %bh, %ah + andb $0xc0, %ah + movb $0x1e, %al + call tstidx + andb $0x3f, %al + jne c5xx + + movb $0x1e, %al + movb %bh, %ah + orb $0x3f, %ah + call tstidx + xorb $0x3f, %al + andb $0x3f, %al +c5xx: pushf + movb $0x1e, %al + movb %bh, %ah + outw %ax, %dx + popf + je c5done + +c5fail: xorw %bp, %bp +c5done: movb $6, %al + movb %bl, %ah + outw %ax, %dx + ret + +cirrus5_md: + .byte 0x14, 0x19, 0x84 + .byte 0x54, 0x2b, 0x84 + .byte 0 + .ascii "Cirrus Logic 54XX" + .byte 0 + +# Cirrus Logic 64XX -- no known extra modes, but must be identified, because +# it's misidentified by the Ahead test. +cirrus6_test: + movw $0x3ce, %dx + movb $0x0a, %al + call inidx + movb %al, %bl # BL=backup + movw $0xce0a, %ax + call tstidx + orb %al, %al + jne c2fail + + movw $0xec0a, %ax + call tstidx + cmpb $0x01, %al + jne c2fail + + movb $0xaa, %al + call inidx # 4X, 5X, 7X and 8X are valid 64XX chip ID's. + shrb $4, %al + subb $4, %al + jz c6done + + decb %al + jz c6done + + subb $2, %al + jz c6done + + decb %al + jz c6done + +c2fail: xorw %bp, %bp +c6done: movb $0x0a, %al + movb %bl, %ah + outw %ax, %dx + ret + +cirrus6_md: + .byte 0 + .ascii "Cirrus Logic 64XX" + .byte 0 + +# Everex / Trident +everex_test: + movw $0x7000, %ax + xorw %bx, %bx + int $0x10 + cmpb $0x70, %al + jne noevrx + + shrw $4, %dx + cmpw $0x678, %dx + je evtrid + + cmpw $0x236, %dx + jne evrxok + +evtrid: leaw trident_md, %bp +evrxok: ret + +noevrx: xorw %bp, %bp + ret + +everex_md: + .byte 0x03, 0x22, 0x50 + .byte 0x04, 0x3c, 0x50 + .byte 0x07, 0x2b, 0x64 + .byte 0x08, 0x4b, 0x64 + .byte 0x0a, 0x19, 0x84 + .byte 0x0b, 0x2c, 0x84 + .byte 0x16, 0x1e, 0x50 + .byte 0x18, 0x1b, 0x64 + .byte 0x21, 0x40, 0xa0 + .byte 0x40, 0x1e, 0x84 + .byte 0 + .ascii "Everex/Trident" + .byte 0 + +# Genoa. +genoa_test: + leaw idgenoa, %si # Check Genoa 'clues' + xorw %ax, %ax + movb %es:(0x37), %al + movw %ax, %di + movw $0x04, %cx + decw %si + decw %di +l1: incw %si + incw %di + movb (%si), %al + testb %al, %al + jz l2 + + cmpb %es:(%di), %al +l2: loope l1 + orw %cx, %cx + je isgen + + xorw %bp, %bp +isgen: ret + +idgenoa: .byte 0x77, 0x00, 0x99, 0x66 + +genoa_md: + .byte 0x58, 0x20, 0x50 + .byte 0x5a, 0x2a, 0x64 + .byte 0x60, 0x19, 0x84 + .byte 0x61, 0x1d, 0x84 + .byte 0x62, 0x20, 0x84 + .byte 0x63, 0x2c, 0x84 + .byte 0x64, 0x3c, 0x84 + .byte 0x6b, 0x4f, 0x64 + .byte 0x72, 0x3c, 0x50 + .byte 0x74, 0x42, 0x50 + .byte 0x78, 0x4b, 0x64 + .byte 0 + .ascii "Genoa" + .byte 0 + +# OAK +oak_test: + leaw idoakvga, %si + movw $0x08, %di + movw $0x08, %cx + repe + cmpsb + je isoak + + xorw %bp, %bp +isoak: ret + +idoakvga: .ascii "OAK VGA " + +oak_md: .byte 0x4e, 0x3c, 0x50 + .byte 0x4f, 0x3c, 0x84 + .byte 0x50, 0x19, 0x84 + .byte 0x51, 0x2b, 0x84 + .byte 0 + .ascii "OAK" + .byte 0 + +# WD Paradise. +paradise_test: + leaw idparadise, %si + movw $0x7d, %di + movw $0x04, %cx + repe + cmpsb + je ispara + + xorw %bp, %bp +ispara: ret + +idparadise: .ascii "VGA=" + +paradise_md: + .byte 0x41, 0x22, 0x50 + .byte 0x47, 0x1c, 0x84 + .byte 0x55, 0x19, 0x84 + .byte 0x54, 0x2c, 0x84 + .byte 0 + .ascii "Paradise" + .byte 0 + +# Trident. +trident_test: + movw $0x3c4, %dx + movb $0x0e, %al + outb %al, %dx + incw %dx + inb %dx, %al + xchgb %al, %ah + xorb %al, %al + outb %al, %dx + inb %dx, %al + xchgb %ah, %al + movb %al, %bl # Strange thing ... in the book this wasn't + andb $0x02, %bl # necessary but it worked on my card which + jz setb2 # is a trident. Without it the screen goes + # blurred ... + andb $0xfd, %al + jmp clrb2 + +setb2: orb $0x02, %al +clrb2: outb %al, %dx + andb $0x0f, %ah + cmpb $0x02, %ah + je istrid + + xorw %bp, %bp +istrid: ret + +trident_md: + .byte 0x50, 0x1e, 0x50 + .byte 0x51, 0x2b, 0x50 + .byte 0x52, 0x3c, 0x50 + .byte 0x57, 0x19, 0x84 + .byte 0x58, 0x1e, 0x84 + .byte 0x59, 0x2b, 0x84 + .byte 0x5a, 0x3c, 0x84 + .byte 0 + .ascii "Trident" + .byte 0 + +# Tseng. +tseng_test: + movw $0x3cd, %dx + inb %dx, %al # Could things be this simple ! :-) + movb %al, %bl + movb $0x55, %al + outb %al, %dx + inb %dx, %al + movb %al, %ah + movb %bl, %al + outb %al, %dx + cmpb $0x55, %ah + je istsen + +isnot: xorw %bp, %bp +istsen: ret + +tseng_md: + .byte 0x26, 0x3c, 0x50 + .byte 0x2a, 0x28, 0x64 + .byte 0x23, 0x19, 0x84 + .byte 0x24, 0x1c, 0x84 + .byte 0x22, 0x2c, 0x84 + .byte 0x21, 0x3c, 0x84 + .byte 0 + .ascii "Tseng" + .byte 0 + +# Video7. +video7_test: + movw $0x3cc, %dx + inb %dx, %al + movw $0x3b4, %dx + andb $0x01, %al + jz even7 + + movw $0x3d4, %dx +even7: movb $0x0c, %al + outb %al, %dx + incw %dx + inb %dx, %al + movb %al, %bl + movb $0x55, %al + outb %al, %dx + inb %dx, %al + decw %dx + movb $0x1f, %al + outb %al, %dx + incw %dx + inb %dx, %al + movb %al, %bh + decw %dx + movb $0x0c, %al + outb %al, %dx + incw %dx + movb %bl, %al + outb %al, %dx + movb $0x55, %al + xorb $0xea, %al + cmpb %bh, %al + jne isnot + + movb $VIDEO_FIRST_V7>>8, svga_prefix # Use special mode switching + ret + +video7_md: + .byte 0x40, 0x2b, 0x50 + .byte 0x43, 0x3c, 0x50 + .byte 0x44, 0x3c, 0x64 + .byte 0x41, 0x19, 0x84 + .byte 0x42, 0x2c, 0x84 + .byte 0x45, 0x1c, 0x84 + .byte 0 + .ascii "Video 7" + .byte 0 + +# Realtek VGA +realtek_test: + leaw idrtvga, %si + movw $0x45, %di + movw $0x0b, %cx + repe + cmpsb + je isrt + + xorw %bp, %bp +isrt: ret + +idrtvga: .ascii "REALTEK VGA" + +realtek_md: + .byte 0x1a, 0x3c, 0x50 + .byte 0x1b, 0x19, 0x84 + .byte 0x1c, 0x1e, 0x84 + .byte 0x1d, 0x2b, 0x84 + .byte 0x1e, 0x3c, 0x84 + .byte 0 + .ascii "REALTEK" + .byte 0 + +#endif /* CONFIG_VIDEO_SVGA */ + +# User-defined local mode table (VGA only) +#ifdef CONFIG_VIDEO_LOCAL +local_modes: + leaw local_mode_table, %si +locm1: lodsw + orw %ax, %ax + jz locm2 + + stosw + movsw + jmp locm1 + +locm2: ret + +# This is the table of local video modes which can be supplied manually +# by the user. Each entry consists of mode ID (word) and dimensions +# (byte for column count and another byte for row count). These modes +# are placed before all SVGA and VESA modes and override them if table +# compacting is enabled. The table must end with a zero word followed +# by NUL-terminated video adapter name. +local_mode_table: + .word 0x0100 # Example: 40x25 + .byte 25,40 + .word 0 + .ascii "Local" + .byte 0 +#endif /* CONFIG_VIDEO_LOCAL */ + +# Read a key and return the ASCII code in al, scan code in ah +getkey: xorb %ah, %ah + int $0x16 + ret + +# Read a key with a timeout of 30 seconds. +# The hardware clock is used to get the time. +getkt: call gettime + addb $30, %al # Wait 30 seconds + cmpb $60, %al + jl lminute + + subb $60, %al +lminute: + movb %al, %cl +again: movb $0x01, %ah + int $0x16 + jnz getkey # key pressed, so get it + + call gettime + cmpb %cl, %al + jne again + + movb $0x20, %al # timeout, return `space' + ret + +# Flush the keyboard buffer +flush: movb $0x01, %ah + int $0x16 + jz empty + + xorb %ah, %ah + int $0x16 + jmp flush + +empty: ret + +# Print hexadecimal number. +prthw: pushw %ax + movb %ah, %al + call prthb + popw %ax +prthb: pushw %ax + shrb $4, %al + call prthn + popw %ax + andb $0x0f, %al +prthn: cmpb $0x0a, %al + jc prth1 + + addb $0x07, %al +prth1: addb $0x30, %al + jmp prtchr + +# Print decimal number in al +prtdec: pushw %ax + pushw %cx + xorb %ah, %ah + movb $0x0a, %cl + idivb %cl + cmpb $0x09, %al + jbe lt100 + + call prtdec + jmp skip10 + +lt100: addb $0x30, %al + call prtchr +skip10: movb %ah, %al + addb $0x30, %al + call prtchr + popw %cx + popw %ax + ret + +store_edid: + pushw %es # just save all registers + pushw %ax + pushw %bx + pushw %cx + pushw %dx + pushw %di + + pushw %fs + popw %es + + movl $0x13131313, %eax # memset block with 0x13 + movw $32, %cx + movw $0x140, %di + cld + rep + stosl + + movw $0x4f15, %ax # do VBE/DDC + movw $0x01, %bx + movw $0x00, %cx + movw $0x01, %dx + movw $0x140, %di + int $0x10 + + popw %di # restore all registers + popw %dx + popw %cx + popw %bx + popw %ax + popw %es + ret + +# VIDEO_SELECT-only variables +mt_end: .word 0 # End of video mode table if built +edit_buf: .space 6 # Line editor buffer +card_name: .word 0 # Pointer to adapter name +scanning: .byte 0 # Performing mode scan +do_restore: .byte 0 # Screen contents altered during mode change +svga_prefix: .byte VIDEO_FIRST_BIOS>>8 # Default prefix for BIOS modes +graphic_mode: .byte 0 # Graphic mode with a linear frame buffer +dac_size: .byte 6 # DAC bit depth + +# Status messages +keymsg: .ascii "Press to see video modes available, " + .ascii " to continue or wait 30 secs" + .byte 0x0d, 0x0a, 0 + +listhdr: .byte 0x0d, 0x0a + .ascii "Mode: COLSxROWS:" + +crlft: .byte 0x0d, 0x0a, 0 + +prompt: .byte 0x0d, 0x0a + .asciz "Enter mode number or `scan': " + +unknt: .asciz "Unknown mode ID. Try again." + +badmdt: .ascii "You passed an undefined mode number." + .byte 0x0d, 0x0a, 0 + +vesaer: .ascii "Error: Scanning of VESA modes failed. Please " + .ascii "report to ." + .byte 0x0d, 0x0a, 0 + +old_name: .asciz "CGA/MDA/HGA" + +ega_name: .asciz "EGA" + +svga_name: .ascii " " + +vga_name: .asciz "VGA" + +vesa_name: .asciz "VESA" + +name_bann: .asciz "Video adapter: " +#endif /* CONFIG_VIDEO_SELECT */ + +# Other variables: +adapter: .byte 0 # Video adapter: 0=CGA/MDA/HGA,1=EGA,2=VGA +video_segment: .word 0xb800 # Video memory segment +force_size: .word 0 # Use this size instead of the one in BIOS vars -- cgit v1.1