From 2531d64b6fe2724dc432b67d8dc66bd45621da0b Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Tue, 20 Mar 2012 15:04:18 -0400 Subject: xen/x86: Workaround 'x86/ioapic: Add register level checks to detect bogus io-apic entries' The above mentioned patch checks the IOAPIC and if it contains -1, then it unmaps said IOAPIC. But under Xen we get this: BUG: unable to handle kernel NULL pointer dereference at 0000000000000040 IP: [] xen_irq_init+0x1f/0xb0 PGD 0 Oops: 0002 [#1] SMP CPU 0 Modules linked in: Pid: 1, comm: swapper/0 Not tainted 3.2.10-3.fc16.x86_64 #1 Dell Inc. Inspiron 1525 /0U990C RIP: e030:[] [] xen_irq_init+0x1f/0xb0 RSP: e02b: ffff8800d42cbb70 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 00000000ffffffef RCX: 0000000000000001 RDX: 0000000000000040 RSI: 00000000ffffffef RDI: 0000000000000001 RBP: ffff8800d42cbb80 R08: ffff8800d6400000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 00000000ffffffef R13: 0000000000000001 R14: 0000000000000001 R15: 0000000000000010 FS: 0000000000000000(0000) GS:ffff8800df5fe000(0000) knlGS:0000000000000000 CS: e033 DS: 0000 ES: 0000 CR0:000000008005003b CR2: 0000000000000040 CR3: 0000000001a05000 CR4: 0000000000002660 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper/0 (pid: 1, threadinfo ffff8800d42ca000, task ffff8800d42d0000) Stack: 00000000ffffffef 0000000000000010 ffff8800d42cbbe0 ffffffff8134f157 ffffffff8100a9b2 ffffffff8182ffd1 00000000000000a0 00000000829e7384 0000000000000002 0000000000000010 00000000ffffffff 0000000000000000 Call Trace: [] xen_bind_pirq_gsi_to_irq+0x87/0x230 [] ? check_events+0x12+0x20 [] xen_register_pirq+0x82/0xe0 [] xen_register_gsi.part.2+0x4a/0xd0 [] acpi_register_gsi_xen+0x20/0x30 [] acpi_register_gsi+0xf/0x20 [] acpi_pci_irq_enable+0x12e/0x202 [] pcibios_enable_device+0x39/0x40 [] do_pci_enable_device+0x4b/0x70 [] __pci_enable_device_flags+0xa8/0xf0 [] pci_enable_device+0x13/0x20 The reason we are dying is b/c the call acpi_get_override_irq() is used, which returns the polarity and trigger for the IRQs. That function calls mp_find_ioapics to get the 'struct ioapic' structure - which along with the mp_irq[x] is used to figure out the default values and the polarity/trigger overrides. Since the mp_find_ioapics now returns -1 [b/c the IOAPIC is filled with 0xffffffff], the acpi_get_override_irq() stops trying to lookup in the mp_irq[x] the proper INT_SRV_OVR and we can't install the SCI interrupt. The proper fix for this is going in v3.5 and adds an x86_io_apic_ops struct so that platforms can override it. But for v3.4 lets carry this work-around. This patch does that by providing a slightly different variant of the fake IOAPIC entries. Signed-off-by: Konrad Rzeszutek Wilk --- arch/x86/xen/mmu.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'arch/x86') diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index 1a309ee..91dc287 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -1859,6 +1859,7 @@ pgd_t * __init xen_setup_kernel_pagetable(pgd_t *pgd, #endif /* CONFIG_X86_64 */ static unsigned char dummy_mapping[PAGE_SIZE] __page_aligned_bss; +static unsigned char fake_ioapic_mapping[PAGE_SIZE] __page_aligned_bss; static void xen_set_fixmap(unsigned idx, phys_addr_t phys, pgprot_t prot) { @@ -1899,7 +1900,7 @@ static void xen_set_fixmap(unsigned idx, phys_addr_t phys, pgprot_t prot) * We just don't map the IO APIC - all access is via * hypercalls. Keep the address in the pte for reference. */ - pte = pfn_pte(PFN_DOWN(__pa(dummy_mapping)), PAGE_KERNEL); + pte = pfn_pte(PFN_DOWN(__pa(fake_ioapic_mapping)), PAGE_KERNEL); break; #endif @@ -2064,6 +2065,7 @@ void __init xen_init_mmu_ops(void) pv_mmu_ops = xen_mmu_ops; memset(dummy_mapping, 0xff, PAGE_SIZE); + memset(fake_ioapic_mapping, 0xfd, PAGE_SIZE); } /* Protected by xen_reservation_lock. */ -- cgit v1.1 From e8c9e788f493d3236809e955c9fc12625a461e09 Mon Sep 17 00:00:00 2001 From: "Srivatsa S. Bhat" Date: Thu, 22 Mar 2012 18:29:24 +0530 Subject: xen/smp: Remove unnecessary call to smp_processor_id() There is an extra and unnecessary call to smp_processor_id() in cpu_bringup(). Remove it. Signed-off-by: Srivatsa S. Bhat Signed-off-by: Konrad Rzeszutek Wilk --- arch/x86/xen/smp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/x86') diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c index 240def4..e845555 100644 --- a/arch/x86/xen/smp.c +++ b/arch/x86/xen/smp.c @@ -59,7 +59,7 @@ static irqreturn_t xen_reschedule_interrupt(int irq, void *dev_id) static void __cpuinit cpu_bringup(void) { - int cpu = smp_processor_id(); + int cpu; cpu_init(); touch_softlockup_watchdog(); -- cgit v1.1