From dd8d6ec672f9796528a31033084a4947817d6316 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Wed, 31 Aug 2016 16:57:12 +0300 Subject: x86/platform/intel-mid: Enable WiFi on Intel Edison Intel Edison board provides built-in WiFi dongle based on Broadcom BCM43340. Append the essential data to enable WiFi on Intel Edison. Signed-off-by: Andy Shevchenko Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/20160831135713.79066-1-andriy.shevchenko@linux.intel.com Signed-off-by: Ingo Molnar --- arch/x86/platform/intel-mid/device_libs/Makefile | 2 + .../intel-mid/device_libs/platform_bcm43xx.c | 95 ++++++++++++++++++++++ 2 files changed, 97 insertions(+) create mode 100644 arch/x86/platform/intel-mid/device_libs/platform_bcm43xx.c (limited to 'arch/x86/platform') diff --git a/arch/x86/platform/intel-mid/device_libs/Makefile b/arch/x86/platform/intel-mid/device_libs/Makefile index fc135bf..a4711b5 100644 --- a/arch/x86/platform/intel-mid/device_libs/Makefile +++ b/arch/x86/platform/intel-mid/device_libs/Makefile @@ -1,5 +1,7 @@ # Family-Level Interface Shim (FLIS) obj-$(subst m,y,$(CONFIG_PINCTRL_MERRIFIELD)) += platform_mrfld_pinctrl.o +# WiFi +obj-$(subst m,y,$(CONFIG_BRCMFMAC_SDIO)) += platform_bcm43xx.o # IPC Devices obj-y += platform_ipc.o obj-$(subst m,y,$(CONFIG_MFD_INTEL_MSIC)) += platform_msic.o diff --git a/arch/x86/platform/intel-mid/device_libs/platform_bcm43xx.c b/arch/x86/platform/intel-mid/device_libs/platform_bcm43xx.c new file mode 100644 index 0000000..4392c15 --- /dev/null +++ b/arch/x86/platform/intel-mid/device_libs/platform_bcm43xx.c @@ -0,0 +1,95 @@ +/* + * platform_bcm43xx.c: bcm43xx platform data initilization file + * + * (C) Copyright 2016 Intel Corporation + * Author: Andy Shevchenko + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + */ + +#include +#include +#include +#include +#include + +#include + +#define WLAN_SFI_GPIO_IRQ_NAME "WLAN-interrupt" +#define WLAN_SFI_GPIO_ENABLE_NAME "WLAN-enable" + +#define WLAN_DEV_NAME "0000:00:01.3" + +static struct regulator_consumer_supply bcm43xx_vmmc_supply = { + .dev_name = WLAN_DEV_NAME, + .supply = "vmmc", +}; + +static struct regulator_init_data bcm43xx_vmmc_data = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &bcm43xx_vmmc_supply, +}; + +static struct fixed_voltage_config bcm43xx_vmmc = { + .supply_name = "bcm43xx-vmmc-regulator", + /* + * Announce 2.0V here to be compatible with SDIO specification. The + * real voltage and signaling are still 1.8V. + */ + .microvolts = 2000000, /* 1.8V */ + .gpio = -EINVAL, + .startup_delay = 250 * 1000, /* 250ms */ + .enable_high = 1, /* active high */ + .enabled_at_boot = 0, /* disabled at boot */ + .init_data = &bcm43xx_vmmc_data, +}; + +static struct platform_device bcm43xx_vmmc_regulator = { + .name = "reg-fixed-voltage", + .id = PLATFORM_DEVID_AUTO, + .dev = { + .platform_data = &bcm43xx_vmmc, + }, +}; + +static int __init bcm43xx_regulator_register(void) +{ + int ret; + + bcm43xx_vmmc.gpio = get_gpio_by_name(WLAN_SFI_GPIO_ENABLE_NAME); + ret = platform_device_register(&bcm43xx_vmmc_regulator); + if (ret) { + pr_err("%s: vmmc regulator register failed\n", __func__); + return ret; + } + + return 0; +} + +static void __init *bcm43xx_platform_data(void *info) +{ + int ret; + + ret = bcm43xx_regulator_register(); + if (ret) + return NULL; + + pr_info("Using generic wifi platform data\n"); + + /* For now it's empty */ + return NULL; +} + +static const struct devs_id bcm43xx_clk_vmmc_dev_id __initconst = { + .name = "bcm43xx_clk_vmmc", + .type = SFI_DEV_TYPE_SD, + .get_platform_data = &bcm43xx_platform_data, +}; + +sfi_device(bcm43xx_clk_vmmc_dev_id); -- cgit v1.1