From b230eb32c8d568284c1f33f5d06005eb97d4f897 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 16 Mar 2010 02:01:33 +0000 Subject: sh: mach-ecovec24: Add i2c_put_adapter on sh_eth_init i2c_put_adapter is needed after i2c_get_adapter Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- arch/sh/boards/mach-ecovec24/setup.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/sh') diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index 39ed872..6c13b92 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -836,6 +836,8 @@ static void __init sh_eth_init(struct sh_eth_plat_data *pd) pd->mac_addr[i] = mac_read(a, 0x10 + i); msleep(10); } + + i2c_put_adapter(a); } #else static void __init sh_eth_init(struct sh_eth_plat_data *pd) -- cgit v1.1 From bec9fb072f58a77a449c4bb3b1b036fcecc68663 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 16 Mar 2010 02:01:53 +0000 Subject: sh: ms7724: Add tiny-document for sound Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- arch/sh/boards/mach-se/7724/setup.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/sh') diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c index 66cdbc3..ccaa290 100644 --- a/arch/sh/boards/mach-se/7724/setup.c +++ b/arch/sh/boards/mach-se/7724/setup.c @@ -52,6 +52,13 @@ * and change SW41 to use 720p */ +/* + * about sound + * + * This setup.c supports FSI slave mode. + * Please change J20, J21, J22 pin to 1-2 connection. + */ + /* Heartbeat */ static struct resource heartbeat_resource = { .start = PA_LED, @@ -276,6 +283,7 @@ static struct clk fsimcka_clk = { .rate = 0, /* unknown */ }; +/* change J20, J21, J22 pin to 1-2 connection to use slave mode */ struct sh_fsi_platform_info fsi_info = { .porta_flags = SH_FSI_BRS_INV | SH_FSI_OUT_SLAVE_MODE | -- cgit v1.1 From 67eaa3e4fb29a758f92c9296ca006264a034e9c2 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 16 Mar 2010 02:02:08 +0000 Subject: sh: Add watch-dog register address for SH7722/SH7723/SH7724 Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- arch/sh/include/cpu-sh4/cpu/watchdog.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch/sh') diff --git a/arch/sh/include/cpu-sh4/cpu/watchdog.h b/arch/sh/include/cpu-sh4/cpu/watchdog.h index 7672301..7f62b93 100644 --- a/arch/sh/include/cpu-sh4/cpu/watchdog.h +++ b/arch/sh/include/cpu-sh4/cpu/watchdog.h @@ -21,6 +21,12 @@ #define WTCNT 0xffcc0000 /*WDTST*/ #define WTST WTCNT #define WTBST 0xffcc0008 /*WDTBST*/ +/* Register definitions */ +#elif defined(CONFIG_CPU_SUBTYPE_SH7722) || \ + defined(CONFIG_CPU_SUBTYPE_SH7723) || \ + defined(CONFIG_CPU_SUBTYPE_SH7724) +#define WTCNT 0xa4520000 +#define WTCSR 0xa4520004 #else /* Register definitions */ #define WTCNT 0xffc00008 -- cgit v1.1 From 685abecfc2a6036b713229617570980c566c7500 Mon Sep 17 00:00:00 2001 From: Andreas Bombe Date: Sat, 20 Mar 2010 00:38:01 +0000 Subject: sh64: Remove long unused mid_sched macro interruptible_sleep_on() is referenced for use in the mid_sched macro which is not used anywhere. Remove reference and macro as well as the comment which appears to belong with them. Signed-off-by: Andreas Bombe Signed-off-by: Paul Mundt --- arch/sh/kernel/process_64.c | 7 ------- 1 file changed, 7 deletions(-) (limited to 'arch/sh') diff --git a/arch/sh/kernel/process_64.c b/arch/sh/kernel/process_64.c index c90957a..c0d40f6 100644 --- a/arch/sh/kernel/process_64.c +++ b/arch/sh/kernel/process_64.c @@ -504,13 +504,6 @@ out: return error; } -/* - * These bracket the sleeping functions.. - */ -extern void interruptible_sleep_on(wait_queue_head_t *q); - -#define mid_sched ((unsigned long) interruptible_sleep_on) - #ifdef CONFIG_FRAME_POINTER static int in_sh64_switch_to(unsigned long pc) { -- cgit v1.1 From a9eb4f6d1a168c830a206306dfbb1f95a7fed6b3 Mon Sep 17 00:00:00 2001 From: Matt Fleming Date: Sun, 21 Mar 2010 19:51:43 +0000 Subject: sh: Flush ITLB too in PTEAEX's flush_tlb_page() flush_tlb_page() can be used to flush TLB entries that map executable pages. Therefore, we need to ensure that the ITLB is also flushed in local_flush_tlb_page(). Signed-off-by: Matt Fleming Signed-off-by: Paul Mundt --- arch/sh/include/cpu-sh4/cpu/mmu_context.h | 2 ++ arch/sh/mm/tlb-pteaex.c | 2 ++ 2 files changed, 4 insertions(+) (limited to 'arch/sh') diff --git a/arch/sh/include/cpu-sh4/cpu/mmu_context.h b/arch/sh/include/cpu-sh4/cpu/mmu_context.h index 03ea75c..310ec92 100644 --- a/arch/sh/include/cpu-sh4/cpu/mmu_context.h +++ b/arch/sh/include/cpu-sh4/cpu/mmu_context.h @@ -19,6 +19,8 @@ #define MMUCR 0xFF000010 /* MMU Control Register */ +#define MMU_ITLB_ADDRESS_ARRAY 0xF2000000 +#define MMU_ITLB_ADDRESS_ARRAY2 0xF2800000 #define MMU_UTLB_ADDRESS_ARRAY 0xF6000000 #define MMU_UTLB_ADDRESS_ARRAY2 0xF6800000 #define MMU_PAGE_ASSOC_BIT 0x80 diff --git a/arch/sh/mm/tlb-pteaex.c b/arch/sh/mm/tlb-pteaex.c index 32dc674..bdd0982 100644 --- a/arch/sh/mm/tlb-pteaex.c +++ b/arch/sh/mm/tlb-pteaex.c @@ -73,5 +73,7 @@ void local_flush_tlb_one(unsigned long asid, unsigned long page) jump_to_uncached(); __raw_writel(page, MMU_UTLB_ADDRESS_ARRAY | MMU_PAGE_ASSOC_BIT); __raw_writel(asid, MMU_UTLB_ADDRESS_ARRAY2 | MMU_PAGE_ASSOC_BIT); + __raw_writel(page, MMU_ITLB_ADDRESS_ARRAY | MMU_PAGE_ASSOC_BIT); + __raw_writel(asid, MMU_ITLB_ADDRESS_ARRAY2 | MMU_PAGE_ASSOC_BIT); back_to_cached(); } -- cgit v1.1 From b5b6c7eea1124de5b110a48ac62650a690ed2419 Mon Sep 17 00:00:00 2001 From: Matt Fleming Date: Sun, 21 Mar 2010 19:51:52 +0000 Subject: sh: Replace unsafe manipulation of MMUCR Setting the TI in MMUCR causes all the TLB bits in MMUCR to be cleared. Unfortunately, the TLB wired bits are also cleared when setting the TI bit, causing any wired TLB entries to become unwired. Use local_flush_tlb_all() which implements TLB flushing in a safer manner by using the memory-mapped TLB registers. As each CPU has its own PMB the modifications in pmb_init() only affect the local CPU, so only flush the local CPU's TLB. Signed-off-by: Matt Fleming Signed-off-by: Paul Mundt --- arch/sh/mm/pmb.c | 2 +- arch/sh/mm/tlbflush_32.c | 21 +++++++++++++++------ 2 files changed, 16 insertions(+), 7 deletions(-) (limited to 'arch/sh') diff --git a/arch/sh/mm/pmb.c b/arch/sh/mm/pmb.c index a4662e2..0b14dcf 100644 --- a/arch/sh/mm/pmb.c +++ b/arch/sh/mm/pmb.c @@ -802,7 +802,7 @@ void __init pmb_init(void) writel_uncached(0, PMB_IRMCR); /* Flush out the TLB */ - __raw_writel(__raw_readl(MMUCR) | MMUCR_TI, MMUCR); + local_flush_tlb_all(); ctrl_barrier(); } diff --git a/arch/sh/mm/tlbflush_32.c b/arch/sh/mm/tlbflush_32.c index 004bb3f..77dc5ef 100644 --- a/arch/sh/mm/tlbflush_32.c +++ b/arch/sh/mm/tlbflush_32.c @@ -123,18 +123,27 @@ void local_flush_tlb_mm(struct mm_struct *mm) void local_flush_tlb_all(void) { unsigned long flags, status; + int i; /* * Flush all the TLB. - * - * Write to the MMU control register's bit: - * TF-bit for SH-3, TI-bit for SH-4. - * It's same position, bit #2. */ local_irq_save(flags); + jump_to_uncached(); + status = __raw_readl(MMUCR); - status |= 0x04; - __raw_writel(status, MMUCR); + status = ((status & MMUCR_URB) >> MMUCR_URB_SHIFT); + + if (status == 0) + status = MMUCR_URB_NENTRIES; + + for (i = 0; i < status; i++) + __raw_writel(0x0, MMU_UTLB_ADDRESS_ARRAY | (i << 8)); + + for (i = 0; i < 4; i++) + __raw_writel(0x0, MMU_ITLB_ADDRESS_ARRAY | (i << 8)); + + back_to_cached(); ctrl_barrier(); local_irq_restore(flags); } -- cgit v1.1 From 3fe0f36c7edcd20af0a3cafc68bdd62534c0a7f0 Mon Sep 17 00:00:00 2001 From: Matt Fleming Date: Mon, 22 Mar 2010 22:09:58 +0000 Subject: sh: Fix build after dynamic PMB rework set_pmb_entry() is now only used by a function that is wrapped in #ifdef CONFIG_PM, so wrap set_pmb_entry() in CONFIG_PM too. Signed-off-by: Matt Fleming Signed-off-by: Paul Mundt --- arch/sh/mm/pmb.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/sh') diff --git a/arch/sh/mm/pmb.c b/arch/sh/mm/pmb.c index 0b14dcf..3cc2193 100644 --- a/arch/sh/mm/pmb.c +++ b/arch/sh/mm/pmb.c @@ -323,6 +323,7 @@ static void __clear_pmb_entry(struct pmb_entry *pmbe) writel_uncached(data_val & ~PMB_V, data); } +#ifdef CONFIG_PM static void set_pmb_entry(struct pmb_entry *pmbe) { unsigned long flags; @@ -331,6 +332,7 @@ static void set_pmb_entry(struct pmb_entry *pmbe) __set_pmb_entry(pmbe); spin_unlock_irqrestore(&pmbe->lock, flags); } +#endif /* CONFIG_PM */ int pmb_bolt_mapping(unsigned long vaddr, phys_addr_t phys, unsigned long size, pgprot_t prot) -- cgit v1.1 From 90851c40769791a6ddeef691c482ecf69bae4a5c Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 23 Mar 2010 17:06:47 +0900 Subject: sh: Tidy up a couple of section mismatches. select_idle_routine() and register_sh_pmu() both needed their annotations fixed up to silence section mismatch warnings. Signed-off-by: Paul Mundt --- arch/sh/kernel/idle.c | 2 +- arch/sh/kernel/perf_event.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/sh') diff --git a/arch/sh/kernel/idle.c b/arch/sh/kernel/idle.c index 0fd7b41..273f890 100644 --- a/arch/sh/kernel/idle.c +++ b/arch/sh/kernel/idle.c @@ -112,7 +112,7 @@ void cpu_idle(void) } } -void __cpuinit select_idle_routine(void) +void __init select_idle_routine(void) { /* * If a platform has set its own idle routine, leave it alone. diff --git a/arch/sh/kernel/perf_event.c b/arch/sh/kernel/perf_event.c index 9f253e9..81b6de4 100644 --- a/arch/sh/kernel/perf_event.c +++ b/arch/sh/kernel/perf_event.c @@ -315,7 +315,7 @@ void hw_perf_disable(void) sh_pmu->disable_all(); } -int register_sh_pmu(struct sh_pmu *pmu) +int __cpuinit register_sh_pmu(struct sh_pmu *pmu) { if (sh_pmu) return -EBUSY; -- cgit v1.1 From 4e1a2594094020bdb41c18681c1765671138d06a Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 23 Mar 2010 17:07:41 +0900 Subject: sh: Silence unintialized variable warnings in dwarf unwinder. The parent rb_node needs to be initialized to shut up the compiler, even though we're unlikely to ever hit this issue at run time. Signed-off-by: Paul Mundt --- arch/sh/kernel/dwarf.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/sh') diff --git a/arch/sh/kernel/dwarf.c b/arch/sh/kernel/dwarf.c index bd1c497..94739ee 100644 --- a/arch/sh/kernel/dwarf.c +++ b/arch/sh/kernel/dwarf.c @@ -727,7 +727,7 @@ static int dwarf_parse_cie(void *entry, void *p, unsigned long len, unsigned char *end, struct module *mod) { struct rb_node **rb_node = &cie_root.rb_node; - struct rb_node *parent; + struct rb_node *parent = *rb_node; struct dwarf_cie *cie; unsigned long flags; int count; @@ -856,7 +856,7 @@ static int dwarf_parse_fde(void *entry, u32 entry_type, unsigned char *end, struct module *mod) { struct rb_node **rb_node = &fde_root.rb_node; - struct rb_node *parent; + struct rb_node *parent = *rb_node; struct dwarf_fde *fde; struct dwarf_cie *cie; unsigned long flags; -- cgit v1.1 From 4539282dbc20fe612113c8f267d51a90d46a7f50 Mon Sep 17 00:00:00 2001 From: Matt Fleming Date: Fri, 26 Mar 2010 11:37:16 +0900 Subject: sh: update the TLB replacement counter for entry wiring. Presently the TLB wiring code depends on MMUCR.URB for working out where to place the wired entry, but fails to take the replacment counter in to consideration. This fixes up the wiring logic and ensures that wired entries remain so. Signed-off-by: Matt Fleming Signed-off-by: Paul Mundt --- arch/sh/include/cpu-sh4/cpu/mmu_context.h | 2 ++ arch/sh/mm/tlb-urb.c | 22 +++++++++++++++++----- 2 files changed, 19 insertions(+), 5 deletions(-) (limited to 'arch/sh') diff --git a/arch/sh/include/cpu-sh4/cpu/mmu_context.h b/arch/sh/include/cpu-sh4/cpu/mmu_context.h index 310ec92..5963124 100644 --- a/arch/sh/include/cpu-sh4/cpu/mmu_context.h +++ b/arch/sh/include/cpu-sh4/cpu/mmu_context.h @@ -30,6 +30,8 @@ #define MMUCR_URB 0x00FC0000 #define MMUCR_URB_SHIFT 18 #define MMUCR_URB_NENTRIES 64 +#define MMUCR_URC 0x0000FC00 +#define MMUCR_URC_SHIFT 10 #if defined(CONFIG_32BIT) && defined(CONFIG_CPU_SUBTYPE_ST40) #define MMUCR_SE (1 << 4) diff --git a/arch/sh/mm/tlb-urb.c b/arch/sh/mm/tlb-urb.c index bb5b909..c92ce20 100644 --- a/arch/sh/mm/tlb-urb.c +++ b/arch/sh/mm/tlb-urb.c @@ -24,13 +24,9 @@ void tlb_wire_entry(struct vm_area_struct *vma, unsigned long addr, pte_t pte) local_irq_save(flags); - /* Load the entry into the TLB */ - __update_tlb(vma, addr, pte); - - /* ... and wire it up. */ status = __raw_readl(MMUCR); urb = (status & MMUCR_URB) >> MMUCR_URB_SHIFT; - status &= ~MMUCR_URB; + status &= ~MMUCR_URC; /* * Make sure we're not trying to wire the last TLB entry slot. @@ -39,7 +35,23 @@ void tlb_wire_entry(struct vm_area_struct *vma, unsigned long addr, pte_t pte) urb = urb % MMUCR_URB_NENTRIES; + /* + * Insert this entry into the highest non-wired TLB slot (via + * the URC field). + */ + status |= (urb << MMUCR_URC_SHIFT); + __raw_writel(status, MMUCR); + ctrl_barrier(); + + /* Load the entry into the TLB */ + __update_tlb(vma, addr, pte); + + /* ... and wire it up. */ + status = __raw_readl(MMUCR); + + status &= ~MMUCR_URB; status |= (urb << MMUCR_URB_SHIFT); + __raw_writel(status, MMUCR); ctrl_barrier(); -- cgit v1.1 From 5f6c477a35852c6bfa42474537c582f65bdcf9db Mon Sep 17 00:00:00 2001 From: Yusuke Goda Date: Mon, 29 Mar 2010 02:36:54 +0000 Subject: sh: Update ecovec_defconfig Signed-off-by: Yusuke Goda Signed-off-by: Paul Mundt --- arch/sh/configs/ecovec24_defconfig | 236 +++++++++++++++++++++++++++++-------- 1 file changed, 190 insertions(+), 46 deletions(-) (limited to 'arch/sh') diff --git a/arch/sh/configs/ecovec24_defconfig b/arch/sh/configs/ecovec24_defconfig index 18e3356..6041c66 100644 --- a/arch/sh/configs/ecovec24_defconfig +++ b/arch/sh/configs/ecovec24_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc2 -# Mon Jan 4 11:20:36 2010 +# Linux kernel version: 2.6.34-rc2 +# Mon Mar 29 02:21:58 2010 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -13,8 +13,8 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y -CONFIG_GENERIC_IRQ_PROBE=y CONFIG_IRQ_PER_CPU=y +CONFIG_SPARSE_IRQ=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y @@ -32,6 +32,7 @@ CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_DMA_NONCOHERENT=y +CONFIG_NEED_DMA_MAP_STATE=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -47,9 +48,11 @@ CONFIG_LOCALVERSION="" CONFIG_HAVE_KERNEL_GZIP=y CONFIG_HAVE_KERNEL_BZIP2=y CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_HAVE_KERNEL_LZO=y CONFIG_KERNEL_GZIP=y # CONFIG_KERNEL_BZIP2 is not set # CONFIG_KERNEL_LZMA is not set +# CONFIG_KERNEL_LZO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y @@ -71,14 +74,8 @@ CONFIG_RCU_FANOUT=32 # CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set @@ -107,7 +104,7 @@ CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters # -# CONFIG_PERF_EVENTS is not set +CONFIG_PERF_EVENTS=y # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_COMPAT_BRK=y @@ -116,13 +113,13 @@ CONFIG_SLAB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set CONFIG_HAVE_OPROFILE=y -CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y +CONFIG_HAVE_HW_BREAKPOINT=y # # GCOV-based kernel profiling @@ -234,12 +231,12 @@ CONFIG_CPU_SUBTYPE_SH7724=y CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 -CONFIG_FORCE_MAX_ZONEORDER=11 +CONFIG_FORCE_MAX_ZONEORDER=12 CONFIG_MEMORY_START=0x08000000 CONFIG_MEMORY_SIZE=0x10000000 CONFIG_29BIT=y -# CONFIG_PMB_ENABLE is not set -# CONFIG_X2TLB is not set +# CONFIG_PMB is not set +CONFIG_X2TLB=y CONFIG_VSYSCALL=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y @@ -247,6 +244,8 @@ CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_MAX_ACTIVE_REGIONS=1 CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_IOREMAP_FIXED=y +CONFIG_UNCACHED_MAPPING=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set @@ -262,7 +261,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 -CONFIG_NR_QUICK=2 +CONFIG_NR_QUICK=1 # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 @@ -337,7 +336,6 @@ CONFIG_SECCOMP=y # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y CONFIG_GUSA=y -# CONFIG_SPARSE_IRQ is not set # # Boot options @@ -347,7 +345,7 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000 CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_CMDLINE_OVERWRITE=y # CONFIG_CMDLINE_EXTEND is not set -CONFIG_CMDLINE="console=tty0, console=ttySC0,115200 root=/dev/nfs ip=dhcp mem=120M memchunk.vpu=4m" +CONFIG_CMDLINE="console=tty0, console=ttySC0,115200 root=/dev/nfs ip=dhcp mem=248M memchunk.vpu=8m memchunk.veu0=4m" # # Bus options @@ -373,6 +371,7 @@ CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y # CONFIG_HIBERNATION is not set CONFIG_PM_RUNTIME=y +CONFIG_PM_OPS=y # CONFIG_CPU_IDLE is not set CONFIG_NET=y @@ -380,7 +379,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -445,7 +443,45 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set -# CONFIG_IRDA is not set +CONFIG_IRDA=y + +# +# IrDA protocols +# +# CONFIG_IRLAN is not set +# CONFIG_IRCOMM is not set +# CONFIG_IRDA_ULTRA is not set + +# +# IrDA options +# +# CONFIG_IRDA_CACHE_LAST_LSAP is not set +# CONFIG_IRDA_FAST_RR is not set +# CONFIG_IRDA_DEBUG is not set + +# +# Infrared-port device drivers +# + +# +# SIR device drivers +# +# CONFIG_IRTTY_SIR is not set + +# +# Dongle support +# +CONFIG_SH_SIR=y +# CONFIG_KINGSUN_DONGLE is not set +# CONFIG_KSDAZZLE_DONGLE is not set +# CONFIG_KS959_DONGLE is not set + +# +# FIR device drivers +# +# CONFIG_USB_IRDA is not set +# CONFIG_SIGMATEL_FIR is not set +# CONFIG_MCS_FIR is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y @@ -556,6 +592,7 @@ CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_NAND_SH_FLCTL is not set # CONFIG_MTD_ONENAND is not set # @@ -597,6 +634,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_ISL29003 is not set +# CONFIG_SENSORS_TSL2550 is not set # CONFIG_DS1682 is not set # CONFIG_TI_DAC7512 is not set # CONFIG_C2PORT is not set @@ -616,6 +654,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y @@ -768,7 +807,29 @@ CONFIG_KEYBOARD_SH_KEYSC=y # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_AD7877 is not set +# CONFIG_TOUCHSCREEN_AD7879_I2C is not set +# CONFIG_TOUCHSCREEN_AD7879_SPI is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_DYNAPRO is not set +# CONFIG_TOUCHSCREEN_EETI is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MCS5000 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +CONFIG_TOUCHSCREEN_TSC2007=y +# CONFIG_TOUCHSCREEN_W90X900 is not set # CONFIG_INPUT_MISC is not set # @@ -802,10 +863,10 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=6 CONFIG_SERIAL_SH_SCI_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_TIMBERDALE is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_HW_RANDOM_TIMERIOMEM is not set @@ -830,6 +891,7 @@ CONFIG_I2C_HELPER_AUTO=y # CONFIG_I2C_OCORES is not set CONFIG_I2C_SH_MOBILE=y # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -843,15 +905,9 @@ CONFIG_I2C_SH_MOBILE=y # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set CONFIG_SPI=y CONFIG_SPI_MASTER=y @@ -882,13 +938,16 @@ CONFIG_GPIOLIB=y # # Memory mapped GPIO expanders: # +# CONFIG_GPIO_IT8761E is not set # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX7300 is not set # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_ADP5588 is not set # # PCI GPIO expanders: @@ -919,23 +978,26 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # -# CONFIG_MFD_CORE is not set +CONFIG_MFD_CORE=y +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set -# CONFIG_MFD_SH_MOBILE_SDHI is not set +CONFIG_MFD_SH_MOBILE_SDHI=y # CONFIG_HTC_PASIC3 is not set +# CONFIG_HTC_I2CPLD is not set # CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_MFD_MC13783 is not set # CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set -# CONFIG_MFD_88PM8607 is not set # CONFIG_AB4500_CORE is not set # CONFIG_REGULATOR is not set CONFIG_MEDIA_SUPPORT=y @@ -985,10 +1047,10 @@ CONFIG_SOC_CAMERA=y # CONFIG_SOC_CAMERA_MT9M001 is not set # CONFIG_SOC_CAMERA_MT9M111 is not set # CONFIG_SOC_CAMERA_MT9T031 is not set -# CONFIG_SOC_CAMERA_MT9T112 is not set +CONFIG_SOC_CAMERA_MT9T112=y # CONFIG_SOC_CAMERA_MT9V022 is not set # CONFIG_SOC_CAMERA_RJ54N1 is not set -# CONFIG_SOC_CAMERA_TW9910 is not set +CONFIG_SOC_CAMERA_TW9910=y # CONFIG_SOC_CAMERA_PLATFORM is not set # CONFIG_SOC_CAMERA_OV772X is not set # CONFIG_SOC_CAMERA_OV9640 is not set @@ -1001,6 +1063,7 @@ CONFIG_RADIO_ADAPTERS=y # CONFIG_RADIO_SI470X is not set # CONFIG_USB_MR800 is not set # CONFIG_RADIO_TEA5764 is not set +# CONFIG_RADIO_SAA7706H is not set # CONFIG_RADIO_TEF6862 is not set # CONFIG_DAB is not set @@ -1034,6 +1097,7 @@ CONFIG_FB_DEFERRED_IO=y # # CONFIG_FB_S1D13XXX is not set CONFIG_FB_SH_MOBILE_LCDC=y +# CONFIG_FB_TMIO is not set # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set @@ -1062,7 +1126,46 @@ CONFIG_LOGO=y # CONFIG_LOGO_SUPERH_MONO is not set # CONFIG_LOGO_SUPERH_VGA16 is not set CONFIG_LOGO_SUPERH_CLUT224=y -# CONFIG_SOUND is not set +CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_JACK=y +CONFIG_SND_SEQUENCER=y +CONFIG_SND_SEQ_DUMMY=y +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_SEQUENCER_OSS is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set +# CONFIG_SND_DRIVERS is not set +# CONFIG_SND_SPI is not set +CONFIG_SND_SUPERH=y +# CONFIG_SND_USB is not set +CONFIG_SND_SOC=y + +# +# SoC Audio support for SuperH +# +CONFIG_SND_SOC_SH4_FSI=y +# CONFIG_SND_FSI_AK4642 is not set +CONFIG_SND_FSI_DA7210=y +CONFIG_SND_SOC_I2C_AND_SPI=y +# CONFIG_SND_SOC_ALL_CODECS is not set +CONFIG_SND_SOC_DA7210=y +# CONFIG_SOUND_PRIME is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HIDRAW is not set @@ -1077,6 +1180,7 @@ CONFIG_USB_HID=y # # Special HID drivers # +# CONFIG_HID_3M_PCT is not set # CONFIG_HID_A4TECH is not set # CONFIG_HID_APPLE is not set # CONFIG_HID_BELKIN is not set @@ -1091,12 +1195,16 @@ CONFIG_USB_HID=y # CONFIG_HID_KENSINGTON is not set # CONFIG_HID_LOGITECH is not set # CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MOSART is not set # CONFIG_HID_MONTEREY is not set # CONFIG_HID_NTRIG is not set +# CONFIG_HID_ORTEK is not set # CONFIG_HID_PANTHERLORD is not set # CONFIG_HID_PETALYNX is not set +# CONFIG_HID_QUANTA is not set # CONFIG_HID_SAMSUNG is not set # CONFIG_HID_SONY is not set +# CONFIG_HID_STANTUM is not set # CONFIG_HID_SUNPLUS is not set # CONFIG_HID_GREENASIA is not set # CONFIG_HID_SMARTJOYPLUS is not set @@ -1136,6 +1244,7 @@ CONFIG_USB_MON=y # CONFIG_USB_SL811_HCD is not set CONFIG_USB_R8A66597_HCD=y # CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set # # USB Device Class drivers @@ -1188,7 +1297,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set @@ -1200,8 +1308,45 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_VST is not set -# CONFIG_USB_GADGET is not set +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +# CONFIG_USB_GADGET_DEBUG_FS is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +CONFIG_USB_GADGET_R8A66597=y +CONFIG_USB_R8A66597=y +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C_HSOTG is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LANGWELL is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +# CONFIG_USB_ZERO is not set +# CONFIG_USB_AUDIO is not set +# CONFIG_USB_ETH is not set +# CONFIG_USB_GADGETFS is not set +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +# CONFIG_USB_MASS_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set +# CONFIG_USB_G_NOKIA is not set +# CONFIG_USB_G_MULTI is not set # # OTG and related infrastructure @@ -1224,10 +1369,8 @@ CONFIG_MMC_BLOCK_BOUNCE=y # MMC/SD/SDIO Host Controller Drivers # # CONFIG_MMC_SDHCI is not set -# CONFIG_MMC_AT91 is not set -# CONFIG_MMC_ATMELMCI is not set CONFIG_MMC_SPI=y -# CONFIG_MMC_TMIO is not set +CONFIG_MMC_TMIO=y # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set @@ -1253,10 +1396,10 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_DS1374 is not set # CONFIG_RTC_DRV_DS1672 is not set # CONFIG_RTC_DRV_MAX6900 is not set -# CONFIG_RTC_DRV_RS5C372 is not set +CONFIG_RTC_DRV_RS5C372=y # CONFIG_RTC_DRV_ISL1208 is not set # CONFIG_RTC_DRV_X1205 is not set -CONFIG_RTC_DRV_PCF8563=y +# CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_BQ32K is not set @@ -1303,8 +1446,6 @@ CONFIG_RTC_DRV_PCF8563=y CONFIG_UIO=y # CONFIG_UIO_PDRV is not set CONFIG_UIO_PDRV_GENIRQ=y -# CONFIG_UIO_SMX is not set -# CONFIG_UIO_SERCOS3 is not set # # TI VLYNQ @@ -1390,6 +1531,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set # CONFIG_UBIFS_FS is not set +# CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1418,6 +1560,7 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set @@ -1487,6 +1630,7 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LKDTM is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y @@ -1618,7 +1762,7 @@ CONFIG_CRYPTO_HW=y # CONFIG_BITREVERSE=y CONFIG_GENERIC_FIND_LAST_BIT=y -# CONFIG_CRC_CCITT is not set +CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=y -- cgit v1.1 From 59a2f7d9fd41c68b7013797e82b8f40fc154ccae Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Fri, 26 Mar 2010 22:03:49 +0000 Subject: arch/sh/kernel: Use set_cpus_allowed_ptr Use set_cpus_allowed_ptr rather than set_cpus_allowed. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // @@ expression E1,E2; @@ - set_cpus_allowed(E1, cpumask_of_cpu(E2)) + set_cpus_allowed_ptr(E1, cpumask_of(E2)) @@ expression E; identifier I; @@ - set_cpus_allowed(E, I) + set_cpus_allowed_ptr(E, &I) // Signed-off-by: Julia Lawall Signed-off-by: Paul Mundt --- arch/sh/kernel/cpufreq.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/sh') diff --git a/arch/sh/kernel/cpufreq.c b/arch/sh/kernel/cpufreq.c index dce4f3f..0ffface 100644 --- a/arch/sh/kernel/cpufreq.c +++ b/arch/sh/kernel/cpufreq.c @@ -48,7 +48,7 @@ static int sh_cpufreq_target(struct cpufreq_policy *policy, return -ENODEV; cpus_allowed = current->cpus_allowed; - set_cpus_allowed(current, cpumask_of_cpu(cpu)); + set_cpus_allowed_ptr(current, cpumask_of(cpu)); BUG_ON(smp_processor_id() != cpu); @@ -66,7 +66,7 @@ static int sh_cpufreq_target(struct cpufreq_policy *policy, freqs.flags = 0; cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - set_cpus_allowed(current, cpus_allowed); + set_cpus_allowed_ptr(current, &cpus_allowed); clk_set_rate(cpuclk, freq); cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); -- cgit v1.1 From d5ab780305bb6d60a7b5a74f18cf84eb6ad153b1 Mon Sep 17 00:00:00 2001 From: Andrew Stubbs Date: Mon, 29 Mar 2010 12:04:19 +0900 Subject: sh: Fix FDPIC binary loader Ensure that the aux table is properly initialized, even when optional features are missing. Without this, the FDPIC loader did not work. Signed-off-by: Andrew Stubbs Cc: stable@kernel.org Signed-off-by: Paul Mundt --- arch/sh/include/asm/elf.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'arch/sh') diff --git a/arch/sh/include/asm/elf.h b/arch/sh/include/asm/elf.h index ac04255..ce830fa 100644 --- a/arch/sh/include/asm/elf.h +++ b/arch/sh/include/asm/elf.h @@ -211,7 +211,9 @@ extern void __kernel_vsyscall; #define VSYSCALL_AUX_ENT \ if (vdso_enabled) \ - NEW_AUX_ENT(AT_SYSINFO_EHDR, VDSO_BASE); + NEW_AUX_ENT(AT_SYSINFO_EHDR, VDSO_BASE); \ + else \ + NEW_AUX_ENT(AT_IGNORE, 0); #else #define VSYSCALL_AUX_ENT #endif /* CONFIG_VSYSCALL */ @@ -219,7 +221,7 @@ extern void __kernel_vsyscall; #ifdef CONFIG_SH_FPU #define FPU_AUX_ENT NEW_AUX_ENT(AT_FPUCW, FPSCR_INIT) #else -#define FPU_AUX_ENT +#define FPU_AUX_ENT NEW_AUX_ENT(AT_IGNORE, 0) #endif extern int l1i_cache_shape, l1d_cache_shape, l2_cache_shape; -- cgit v1.1 From 4bea3418c737891894b9d3d3e9f8bbd67d66fa38 Mon Sep 17 00:00:00 2001 From: Matt Fleming Date: Sun, 28 Mar 2010 20:08:25 +0000 Subject: sh: Enable the mmu in start_secondary() For the boot, enable_mmu() is called from setup_arch() but we don't call setup_arch() for any of the other cpus. So turn on the non-boot cpu's mmu inside of start_secondary(). I noticed this bug on an SMP board when trying to map I/O memory (smsc911x registers) into the kernel address space. Since the Address Translation bit in MMUCR wasn't set, accessing the virtual address where the smsc911x registers were supposedly mapped actually performed a physical address access. Signed-off-by: Matt Fleming Cc: stable@kernel.org Signed-off-by: Paul Mundt --- arch/sh/kernel/smp.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/sh') diff --git a/arch/sh/kernel/smp.c b/arch/sh/kernel/smp.c index e124cf7..002cc61 100644 --- a/arch/sh/kernel/smp.c +++ b/arch/sh/kernel/smp.c @@ -69,6 +69,7 @@ asmlinkage void __cpuinit start_secondary(void) unsigned int cpu; struct mm_struct *mm = &init_mm; + enable_mmu(); atomic_inc(&mm->mm_count); atomic_inc(&mm->mm_users); current->active_mm = mm; -- cgit v1.1 From 5a0e3ad6af8660be21ca98a971cd00f331318c05 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 24 Mar 2010 17:04:11 +0900 Subject: include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo Guess-its-ok-by: Christoph Lameter Cc: Ingo Molnar Cc: Lee Schermerhorn --- arch/sh/drivers/dma/dma-api.c | 1 + arch/sh/drivers/dma/dmabrg.c | 1 + arch/sh/drivers/heartbeat.c | 1 + arch/sh/drivers/pci/pcie-sh7786.c | 1 + arch/sh/drivers/push-switch.c | 1 + arch/sh/kernel/cpu/fpu.c | 1 + arch/sh/kernel/cpu/hwblk.c | 1 - arch/sh/kernel/dwarf.c | 1 + arch/sh/kernel/kprobes.c | 1 + arch/sh/kernel/process.c | 1 + arch/sh/kernel/process_32.c | 1 + arch/sh/kernel/process_64.c | 1 + arch/sh/kernel/ptrace_32.c | 1 - arch/sh/kernel/vsyscall/vsyscall.c | 1 - arch/sh/mm/consistent.c | 1 + arch/sh/mm/hugetlbpage.c | 1 - arch/sh/mm/init.c | 1 + arch/sh/mm/ioremap.c | 1 + arch/sh/mm/ioremap_fixed.c | 1 - arch/sh/mm/pgtable.c | 1 + arch/sh/mm/pmb.c | 1 - 21 files changed, 15 insertions(+), 6 deletions(-) (limited to 'arch/sh') diff --git a/arch/sh/drivers/dma/dma-api.c b/arch/sh/drivers/dma/dma-api.c index 727126e..4a27722 100644 --- a/arch/sh/drivers/dma/dma-api.c +++ b/arch/sh/drivers/dma/dma-api.c @@ -17,6 +17,7 @@ #include #include #include +#include #include DEFINE_SPINLOCK(dma_spin_lock); diff --git a/arch/sh/drivers/dma/dmabrg.c b/arch/sh/drivers/dma/dmabrg.c index 72622e3..6ab9c4a 100644 --- a/arch/sh/drivers/dma/dmabrg.c +++ b/arch/sh/drivers/dma/dmabrg.c @@ -8,6 +8,7 @@ #include #include +#include #include #include #include diff --git a/arch/sh/drivers/heartbeat.c b/arch/sh/drivers/heartbeat.c index 2acbc79..7efc9c3 100644 --- a/arch/sh/drivers/heartbeat.c +++ b/arch/sh/drivers/heartbeat.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #define DRV_NAME "heartbeat" diff --git a/arch/sh/drivers/pci/pcie-sh7786.c b/arch/sh/drivers/pci/pcie-sh7786.c index ae91a2d..68cb9b0 100644 --- a/arch/sh/drivers/pci/pcie-sh7786.c +++ b/arch/sh/drivers/pci/pcie-sh7786.c @@ -12,6 +12,7 @@ #include #include #include +#include #include "pcie-sh7786.h" #include diff --git a/arch/sh/drivers/push-switch.c b/arch/sh/drivers/push-switch.c index 725be6d..7b42c24 100644 --- a/arch/sh/drivers/push-switch.c +++ b/arch/sh/drivers/push-switch.c @@ -8,6 +8,7 @@ * for more details. */ #include +#include #include #include #include diff --git a/arch/sh/kernel/cpu/fpu.c b/arch/sh/kernel/cpu/fpu.c index f059ed6..7f1b70c 100644 --- a/arch/sh/kernel/cpu/fpu.c +++ b/arch/sh/kernel/cpu/fpu.c @@ -1,4 +1,5 @@ #include +#include #include #include diff --git a/arch/sh/kernel/cpu/hwblk.c b/arch/sh/kernel/cpu/hwblk.c index c0ad7d4..67a1e81 100644 --- a/arch/sh/kernel/cpu/hwblk.c +++ b/arch/sh/kernel/cpu/hwblk.c @@ -1,6 +1,5 @@ #include #include -#include #include #include #include diff --git a/arch/sh/kernel/dwarf.c b/arch/sh/kernel/dwarf.c index 94739ee..a8234b2 100644 --- a/arch/sh/kernel/dwarf.c +++ b/arch/sh/kernel/dwarf.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/sh/kernel/kprobes.c b/arch/sh/kernel/kprobes.c index c96850b..4049d99 100644 --- a/arch/sh/kernel/kprobes.c +++ b/arch/sh/kernel/kprobes.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include diff --git a/arch/sh/kernel/process.c b/arch/sh/kernel/process.c index 81add9b..17f89aa 100644 --- a/arch/sh/kernel/process.c +++ b/arch/sh/kernel/process.c @@ -1,5 +1,6 @@ #include #include +#include #include struct kmem_cache *task_xstate_cachep = NULL; diff --git a/arch/sh/kernel/process_32.c b/arch/sh/kernel/process_32.c index 3cb88f1..0529819 100644 --- a/arch/sh/kernel/process_32.c +++ b/arch/sh/kernel/process_32.c @@ -15,6 +15,7 @@ */ #include #include +#include #include #include #include diff --git a/arch/sh/kernel/process_64.c b/arch/sh/kernel/process_64.c index c0d40f6..d4ca648 100644 --- a/arch/sh/kernel/process_64.c +++ b/arch/sh/kernel/process_64.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/sh/kernel/ptrace_32.c b/arch/sh/kernel/ptrace_32.c index c625cda..7759a9a 100644 --- a/arch/sh/kernel/ptrace_32.c +++ b/arch/sh/kernel/ptrace_32.c @@ -17,7 +17,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/sh/kernel/vsyscall/vsyscall.c b/arch/sh/kernel/vsyscall/vsyscall.c index 3f7e415..242117c 100644 --- a/arch/sh/kernel/vsyscall/vsyscall.c +++ b/arch/sh/kernel/vsyscall/vsyscall.c @@ -11,7 +11,6 @@ * for more details. */ #include -#include #include #include #include diff --git a/arch/sh/mm/consistent.c b/arch/sh/mm/consistent.c index 902967e..c86a085 100644 --- a/arch/sh/mm/consistent.c +++ b/arch/sh/mm/consistent.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include diff --git a/arch/sh/mm/hugetlbpage.c b/arch/sh/mm/hugetlbpage.c index 9304117..9163db3 100644 --- a/arch/sh/mm/hugetlbpage.c +++ b/arch/sh/mm/hugetlbpage.c @@ -13,7 +13,6 @@ #include #include #include -#include #include #include diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c index 68028e8..c505de6 100644 --- a/arch/sh/mm/init.c +++ b/arch/sh/mm/init.c @@ -10,6 +10,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/sh/mm/ioremap.c b/arch/sh/mm/ioremap.c index 1ab2385..0c99ec2 100644 --- a/arch/sh/mm/ioremap.c +++ b/arch/sh/mm/ioremap.c @@ -14,6 +14,7 @@ */ #include #include +#include #include #include #include diff --git a/arch/sh/mm/ioremap_fixed.c b/arch/sh/mm/ioremap_fixed.c index 7f682e5..efbe84a 100644 --- a/arch/sh/mm/ioremap_fixed.c +++ b/arch/sh/mm/ioremap_fixed.c @@ -15,7 +15,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/sh/mm/pgtable.c b/arch/sh/mm/pgtable.c index 6f21fb1..26e03a1 100644 --- a/arch/sh/mm/pgtable.c +++ b/arch/sh/mm/pgtable.c @@ -1,4 +1,5 @@ #include +#include #define PGALLOC_GFP GFP_KERNEL | __GFP_REPEAT | __GFP_ZERO diff --git a/arch/sh/mm/pmb.c b/arch/sh/mm/pmb.c index 3cc2193..e43ec60 100644 --- a/arch/sh/mm/pmb.c +++ b/arch/sh/mm/pmb.c @@ -15,7 +15,6 @@ #include #include #include -#include #include #include #include -- cgit v1.1 From 5dd6ef5050c5012267e2b84f3d82ba85cdb5ca32 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 2 Apr 2010 16:02:33 +0900 Subject: sh: export return_address() symbol. This is needed with some of the tracing code built as modules, so provide the export. Signed-off-by: Paul Mundt --- arch/sh/kernel/return_address.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch/sh') diff --git a/arch/sh/kernel/return_address.c b/arch/sh/kernel/return_address.c index df3ab58..cbf1dd5 100644 --- a/arch/sh/kernel/return_address.c +++ b/arch/sh/kernel/return_address.c @@ -9,6 +9,7 @@ * for more details. */ #include +#include #include #ifdef CONFIG_DWARF_UNWINDER @@ -52,3 +53,5 @@ void *return_address(unsigned int depth) } #endif + +EXPORT_SYMBOL_GPL(return_address); -- cgit v1.1 From be97d758e5728099e95fe229866d5c6c900d3092 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 2 Apr 2010 16:13:27 +0900 Subject: sh: Fix up the SH-3 build for recent TLB changes. While the MMUCR.URB and ITLB/UTLB differentiation works fine for all SH-4 and later TLBs, these features are absent on SH-3. This splits out local_flush_tlb_all() in to SH-4 and PTEAEX copies while restoring the old SH-3 one, subsequently fixing up the build. This will probably want some further reordering and tidying in the future, but that's out of scope at present. Signed-off-by: Paul Mundt --- arch/sh/mm/tlb-pteaex.c | 28 ++++++++++++++++++++++++++++ arch/sh/mm/tlb-sh3.c | 19 +++++++++++++++++++ arch/sh/mm/tlb-sh4.c | 28 ++++++++++++++++++++++++++++ arch/sh/mm/tlbflush_32.c | 28 ---------------------------- 4 files changed, 75 insertions(+), 28 deletions(-) (limited to 'arch/sh') diff --git a/arch/sh/mm/tlb-pteaex.c b/arch/sh/mm/tlb-pteaex.c index bdd0982..b71db6a 100644 --- a/arch/sh/mm/tlb-pteaex.c +++ b/arch/sh/mm/tlb-pteaex.c @@ -77,3 +77,31 @@ void local_flush_tlb_one(unsigned long asid, unsigned long page) __raw_writel(asid, MMU_ITLB_ADDRESS_ARRAY2 | MMU_PAGE_ASSOC_BIT); back_to_cached(); } + +void local_flush_tlb_all(void) +{ + unsigned long flags, status; + int i; + + /* + * Flush all the TLB. + */ + local_irq_save(flags); + jump_to_uncached(); + + status = __raw_readl(MMUCR); + status = ((status & MMUCR_URB) >> MMUCR_URB_SHIFT); + + if (status == 0) + status = MMUCR_URB_NENTRIES; + + for (i = 0; i < status; i++) + __raw_writel(0x0, MMU_UTLB_ADDRESS_ARRAY | (i << 8)); + + for (i = 0; i < 4; i++) + __raw_writel(0x0, MMU_ITLB_ADDRESS_ARRAY | (i << 8)); + + back_to_cached(); + ctrl_barrier(); + local_irq_restore(flags); +} diff --git a/arch/sh/mm/tlb-sh3.c b/arch/sh/mm/tlb-sh3.c index 4f5f7cb..7a940db 100644 --- a/arch/sh/mm/tlb-sh3.c +++ b/arch/sh/mm/tlb-sh3.c @@ -77,3 +77,22 @@ void local_flush_tlb_one(unsigned long asid, unsigned long page) for (i = 0; i < ways; i++) __raw_writel(data, addr + (i << 8)); } + +void local_flush_tlb_all(void) +{ + unsigned long flags, status; + + /* + * Flush all the TLB. + * + * Write to the MMU control register's bit: + * TF-bit for SH-3, TI-bit for SH-4. + * It's same position, bit #2. + */ + local_irq_save(flags); + status = __raw_readl(MMUCR); + status |= 0x04; + __raw_writel(status, MMUCR); + ctrl_barrier(); + local_irq_restore(flags); +} diff --git a/arch/sh/mm/tlb-sh4.c b/arch/sh/mm/tlb-sh4.c index ccac77f..cfdf793 100644 --- a/arch/sh/mm/tlb-sh4.c +++ b/arch/sh/mm/tlb-sh4.c @@ -80,3 +80,31 @@ void local_flush_tlb_one(unsigned long asid, unsigned long page) __raw_writel(data, addr); back_to_cached(); } + +void local_flush_tlb_all(void) +{ + unsigned long flags, status; + int i; + + /* + * Flush all the TLB. + */ + local_irq_save(flags); + jump_to_uncached(); + + status = __raw_readl(MMUCR); + status = ((status & MMUCR_URB) >> MMUCR_URB_SHIFT); + + if (status == 0) + status = MMUCR_URB_NENTRIES; + + for (i = 0; i < status; i++) + __raw_writel(0x0, MMU_UTLB_ADDRESS_ARRAY | (i << 8)); + + for (i = 0; i < 4; i++) + __raw_writel(0x0, MMU_ITLB_ADDRESS_ARRAY | (i << 8)); + + back_to_cached(); + ctrl_barrier(); + local_irq_restore(flags); +} diff --git a/arch/sh/mm/tlbflush_32.c b/arch/sh/mm/tlbflush_32.c index 77dc5ef..3fbe03c 100644 --- a/arch/sh/mm/tlbflush_32.c +++ b/arch/sh/mm/tlbflush_32.c @@ -119,31 +119,3 @@ void local_flush_tlb_mm(struct mm_struct *mm) local_irq_restore(flags); } } - -void local_flush_tlb_all(void) -{ - unsigned long flags, status; - int i; - - /* - * Flush all the TLB. - */ - local_irq_save(flags); - jump_to_uncached(); - - status = __raw_readl(MMUCR); - status = ((status & MMUCR_URB) >> MMUCR_URB_SHIFT); - - if (status == 0) - status = MMUCR_URB_NENTRIES; - - for (i = 0; i < status; i++) - __raw_writel(0x0, MMU_UTLB_ADDRESS_ARRAY | (i << 8)); - - for (i = 0; i < 4; i++) - __raw_writel(0x0, MMU_ITLB_ADDRESS_ARRAY | (i << 8)); - - back_to_cached(); - ctrl_barrier(); - local_irq_restore(flags); -} -- cgit v1.1