From 6f26d19fce5907cdd0fd953ac1a1d0b1e6e5982c Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Fri, 19 Feb 2010 09:33:47 +0000 Subject: sh: always enable sh7724 vpu_clk and set to 166MHz on Ecovec Update the sh7724 processor code to always enable vpu_clk. On the Ecovec board, set the vpu_clk to 166 Mhz. The 166MHz setting results in a divide-by-6 setup for vpu_clk and improves the VPU performance compared to the power-on-reset/bootloader configuration. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/boards/mach-ecovec24/setup.c | 5 +++++ arch/sh/kernel/cpu/sh4a/clock-sh7724.c | 2 +- 2 files changed, 6 insertions(+), 1 deletion(-) (limited to 'arch/sh') diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index 8e3b05f..a17dbb3 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -1121,6 +1121,11 @@ static int __init arch_setup(void) gpio_request(GPIO_FN_INTC_IRQ1, NULL); gpio_direction_input(GPIO_FN_INTC_IRQ1); + /* set VPU clock to 166 MHz */ + clk = clk_get(NULL, "vpu_clk"); + clk_set_rate(clk, clk_round_rate(clk, 166000000)); + clk_put(clk); + /* enable I2C device */ i2c_register_board_info(0, i2c0_devices, ARRAY_SIZE(i2c0_devices)); diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c index a8a993f..6707061 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c @@ -159,7 +159,7 @@ struct clk div4_clks[DIV4_NR] = { [DIV4_SH] = DIV4("shyway_clk", FRQCRA, 12, 0x2f7c, CLK_ENABLE_ON_INIT), [DIV4_B] = DIV4("bus_clk", FRQCRA, 8, 0x2f7c, CLK_ENABLE_ON_INIT), [DIV4_P] = DIV4("peripheral_clk", FRQCRA, 0, 0x2f7c, 0), - [DIV4_M1] = DIV4("vpu_clk", FRQCRB, 4, 0x2f7c, 0), + [DIV4_M1] = DIV4("vpu_clk", FRQCRB, 4, 0x2f7c, CLK_ENABLE_ON_INIT), }; struct clk div6_clks[] = { -- cgit v1.1