From 25d83cbfaa44e1b9170c0941c3ef52ca39f54ccc Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 28 Sep 2006 16:56:37 +0200 Subject: [S390] Whitespace cleanup. Huge s390 assembly files whitespace cleanup. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/head64.S | 432 +++++++++++++++++++++++----------------------- 1 file changed, 216 insertions(+), 216 deletions(-) (limited to 'arch/s390/kernel/head64.S') diff --git a/arch/s390/kernel/head64.S b/arch/s390/kernel/head64.S index a8bdd96..48998d5 100644 --- a/arch/s390/kernel/head64.S +++ b/arch/s390/kernel/head64.S @@ -15,232 +15,232 @@ # this is called either by the ipl loader or directly by PSW restart # or linload or SALIPL # - .org 0x10000 -startup:basr %r13,0 # get base -.LPG0: l %r13,0f-.LPG0(%r13) - b 0(%r13) -0: .long startup_continue + .org 0x10000 +startup:basr %r13,0 # get base +.LPG0: l %r13,0f-.LPG0(%r13) + b 0(%r13) +0: .long startup_continue # # params at 10400 (setup.h) # - .org PARMAREA - .quad 0 # IPL_DEVICE - .quad 0 # INITRD_START - .quad 0 # INITRD_SIZE + .org PARMAREA + .quad 0 # IPL_DEVICE + .quad 0 # INITRD_START + .quad 0 # INITRD_SIZE - .org COMMAND_LINE - .byte "root=/dev/ram0 ro" - .byte 0 + .org COMMAND_LINE + .byte "root=/dev/ram0 ro" + .byte 0 - .org 0x11000 + .org 0x11000 startup_continue: - basr %r13,0 # get base -.LPG1: sll %r13,1 # remove high order bit - srl %r13,1 - lhi %r1,1 # mode 1 = esame - mvi __LC_AR_MODE_ID,1 # set esame flag - slr %r0,%r0 # set cpuid to zero - sigp %r1,%r0,0x12 # switch to esame mode - sam64 # switch to 64 bit mode - lctlg %c0,%c15,.Lctl-.LPG1(%r13) # load control registers - lg %r12,.Lparmaddr-.LPG1(%r13)# pointer to parameter area - # move IPL device to lowcore - mvc __LC_IPLDEV(4),IPL_DEVICE+4-PARMAREA(%r12) + basr %r13,0 # get base +.LPG1: sll %r13,1 # remove high order bit + srl %r13,1 + lhi %r1,1 # mode 1 = esame + mvi __LC_AR_MODE_ID,1 # set esame flag + slr %r0,%r0 # set cpuid to zero + sigp %r1,%r0,0x12 # switch to esame mode + sam64 # switch to 64 bit mode + lctlg %c0,%c15,.Lctl-.LPG1(%r13) # load control registers + lg %r12,.Lparmaddr-.LPG1(%r13) # pointer to parameter area + # move IPL device to lowcore + mvc __LC_IPLDEV(4),IPL_DEVICE+4-PARMAREA(%r12) # # Setup stack # - larl %r15,init_thread_union - lg %r14,__TI_task(%r15) # cache current in lowcore - stg %r14,__LC_CURRENT - aghi %r15,1<<(PAGE_SHIFT+THREAD_ORDER) # init_task_union + THREAD_SIZE - stg %r15,__LC_KERNEL_STACK # set end of kernel stack - aghi %r15,-160 - xc __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15) # clear backchain + larl %r15,init_thread_union + lg %r14,__TI_task(%r15) # cache current in lowcore + stg %r14,__LC_CURRENT + aghi %r15,1<<(PAGE_SHIFT+THREAD_ORDER) # init_task_union + THREAD_SIZE + stg %r15,__LC_KERNEL_STACK # set end of kernel stack + aghi %r15,-160 + xc __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15) # clear backchain - brasl %r14,ipl_save_parameters + brasl %r14,ipl_save_parameters # # clear bss memory # - larl %r2,__bss_start # start of bss segment - larl %r3,_end # end of bss segment - sgr %r3,%r2 # length of bss - sgr %r4,%r4 # - sgr %r5,%r5 # set src,length and pad to zero - mvcle %r2,%r4,0 # clear mem - jo .-4 # branch back, if not finish + larl %r2,__bss_start # start of bss segment + larl %r3,_end # end of bss segment + sgr %r3,%r2 # length of bss + sgr %r4,%r4 # + sgr %r5,%r5 # set src,length and pad to zero + mvcle %r2,%r4,0 # clear mem + jo .-4 # branch back, if not finish - l %r2,.Lrcp-.LPG1(%r13) # Read SCP forced command word + l %r2,.Lrcp-.LPG1(%r13) # Read SCP forced command word .Lservicecall: - stosm .Lpmask-.LPG1(%r13),0x01 # authorize ext interrupts + stosm .Lpmask-.LPG1(%r13),0x01 # authorize ext interrupts - stctg %r0,%r0,.Lcr-.LPG1(%r13) # get cr0 - la %r1,0x200 # set bit 22 - og %r1,.Lcr-.LPG1(%r13) # or old cr0 with r1 - stg %r1,.Lcr-.LPG1(%r13) - lctlg %r0,%r0,.Lcr-.LPG1(%r13) # load modified cr0 + stctg %r0,%r0,.Lcr-.LPG1(%r13) # get cr0 + la %r1,0x200 # set bit 22 + og %r1,.Lcr-.LPG1(%r13) # or old cr0 with r1 + stg %r1,.Lcr-.LPG1(%r13) + lctlg %r0,%r0,.Lcr-.LPG1(%r13) # load modified cr0 - mvc __LC_EXT_NEW_PSW(8),.Lpcmsk-.LPG1(%r13) # set postcall psw - larl %r1,.Lsclph - stg %r1,__LC_EXT_NEW_PSW+8 # set handler + mvc __LC_EXT_NEW_PSW(8),.Lpcmsk-.LPG1(%r13) # set postcall psw + larl %r1,.Lsclph + stg %r1,__LC_EXT_NEW_PSW+8 # set handler - larl %r4,.Lsccb # %r4 is our index for sccb stuff - lgr %r1,%r4 # our sccb - .insn rre,0xb2200000,%r2,%r1 # service call - ipm %r1 - srl %r1,28 # get cc code - xr %r3,%r3 - chi %r1,3 - be .Lfchunk-.LPG1(%r13) # leave - chi %r1,2 - be .Lservicecall-.LPG1(%r13) - lpswe .Lwaitsclp-.LPG1(%r13) + larl %r4,.Lsccb # %r4 is our index for sccb stuff + lgr %r1,%r4 # our sccb + .insn rre,0xb2200000,%r2,%r1 # service call + ipm %r1 + srl %r1,28 # get cc code + xr %r3,%r3 + chi %r1,3 + be .Lfchunk-.LPG1(%r13) # leave + chi %r1,2 + be .Lservicecall-.LPG1(%r13) + lpswe .Lwaitsclp-.LPG1(%r13) .Lsclph: - lh %r1,.Lsccbr-.Lsccb(%r4) - chi %r1,0x10 # 0x0010 is the sucess code - je .Lprocsccb # let's process the sccb - chi %r1,0x1f0 - bne .Lfchunk-.LPG1(%r13) # unhandled error code - c %r2,.Lrcp-.LPG1(%r13) # Did we try Read SCP forced - bne .Lfchunk-.LPG1(%r13) # if no, give up - l %r2,.Lrcp2-.LPG1(%r13) # try with Read SCP - b .Lservicecall-.LPG1(%r13) + lh %r1,.Lsccbr-.Lsccb(%r4) + chi %r1,0x10 # 0x0010 is the sucess code + je .Lprocsccb # let's process the sccb + chi %r1,0x1f0 + bne .Lfchunk-.LPG1(%r13) # unhandled error code + c %r2,.Lrcp-.LPG1(%r13) # Did we try Read SCP forced + bne .Lfchunk-.LPG1(%r13) # if no, give up + l %r2,.Lrcp2-.LPG1(%r13) # try with Read SCP + b .Lservicecall-.LPG1(%r13) .Lprocsccb: - lghi %r1,0 - icm %r1,3,.Lscpincr1-.Lsccb(%r4) # use this one if != 0 - jnz .Lscnd - lg %r1,.Lscpincr2-.Lsccb(%r4) # otherwise use this one + lghi %r1,0 + icm %r1,3,.Lscpincr1-.Lsccb(%r4) # use this one if != 0 + jnz .Lscnd + lg %r1,.Lscpincr2-.Lsccb(%r4) # otherwise use this one .Lscnd: - xr %r3,%r3 # same logic - ic %r3,.Lscpa1-.Lsccb(%r4) - chi %r3,0x00 - jne .Lcompmem - l %r3,.Lscpa2-.Lsccb(%r4) + xr %r3,%r3 # same logic + ic %r3,.Lscpa1-.Lsccb(%r4) + chi %r3,0x00 + jne .Lcompmem + l %r3,.Lscpa2-.Lsccb(%r4) .Lcompmem: - mlgr %r2,%r1 # mem in MB on 128-bit - l %r1,.Lonemb-.LPG1(%r13) - mlgr %r2,%r1 # mem size in bytes in %r3 - b .Lfchunk-.LPG1(%r13) + mlgr %r2,%r1 # mem in MB on 128-bit + l %r1,.Lonemb-.LPG1(%r13) + mlgr %r2,%r1 # mem size in bytes in %r3 + b .Lfchunk-.LPG1(%r13) - .align 4 + .align 4 .Lpmask: - .byte 0 - .align 8 + .byte 0 + .align 8 .Lcr: - .quad 0x00 # place holder for cr0 + .quad 0x00 # place holder for cr0 .Lwaitsclp: - .quad 0x0102000180000000,.Lsclph + .quad 0x0102000180000000,.Lsclph .Lrcp: - .int 0x00120001 # Read SCP forced code + .int 0x00120001 # Read SCP forced code .Lrcp2: - .int 0x00020001 # Read SCP code + .int 0x00020001 # Read SCP code .Lonemb: - .int 0x100000 + .int 0x100000 .Lfchunk: - # set program check new psw mask - mvc __LC_PGM_NEW_PSW(8),.Lpcmsk-.LPG1(%r13) + # set program check new psw mask + mvc __LC_PGM_NEW_PSW(8),.Lpcmsk-.LPG1(%r13) # # find memory chunks. # - lgr %r9,%r3 # end of mem - larl %r1,.Lchkmem # set program check address - stg %r1,__LC_PGM_NEW_PSW+8 - la %r1,1 # test in increments of 128KB - sllg %r1,%r1,17 - larl %r3,memory_chunk - slgr %r4,%r4 # set start of chunk to zero - slgr %r5,%r5 # set end of chunk to zero - slr %r6,%r6 # set access code to zero - la %r10,MEMORY_CHUNKS # number of chunks + lgr %r9,%r3 # end of mem + larl %r1,.Lchkmem # set program check address + stg %r1,__LC_PGM_NEW_PSW+8 + la %r1,1 # test in increments of 128KB + sllg %r1,%r1,17 + larl %r3,memory_chunk + slgr %r4,%r4 # set start of chunk to zero + slgr %r5,%r5 # set end of chunk to zero + slr %r6,%r6 # set access code to zero + la %r10,MEMORY_CHUNKS # number of chunks .Lloop: - tprot 0(%r5),0 # test protection of first byte - ipm %r7 - srl %r7,28 - clr %r6,%r7 # compare cc with last access code - je .Lsame - j .Lchkmem + tprot 0(%r5),0 # test protection of first byte + ipm %r7 + srl %r7,28 + clr %r6,%r7 # compare cc with last access code + je .Lsame + j .Lchkmem .Lsame: - algr %r5,%r1 # add 128KB to end of chunk - # no need to check here, - brc 12,.Lloop # this is the same chunk -.Lchkmem: # > 16EB or tprot got a program check - clgr %r4,%r5 # chunk size > 0? - je .Lchkloop - stg %r4,0(%r3) # store start address of chunk - lgr %r0,%r5 - slgr %r0,%r4 - stg %r0,8(%r3) # store size of chunk - st %r6,20(%r3) # store type of chunk - la %r3,24(%r3) - larl %r8,memory_size - stg %r5,0(%r8) # store memory size - ahi %r10,-1 # update chunk number + algr %r5,%r1 # add 128KB to end of chunk + # no need to check here, + brc 12,.Lloop # this is the same chunk +.Lchkmem: # > 16EB or tprot got a program check + clgr %r4,%r5 # chunk size > 0? + je .Lchkloop + stg %r4,0(%r3) # store start address of chunk + lgr %r0,%r5 + slgr %r0,%r4 + stg %r0,8(%r3) # store size of chunk + st %r6,20(%r3) # store type of chunk + la %r3,24(%r3) + larl %r8,memory_size + stg %r5,0(%r8) # store memory size + ahi %r10,-1 # update chunk number .Lchkloop: - lr %r6,%r7 # set access code to last cc + lr %r6,%r7 # set access code to last cc # we got an exception or we're starting a new # chunk , we must check if we should # still try to find valid memory (if we detected # the amount of available storage), and if we # have chunks left - lghi %r4,1 - sllg %r4,%r4,31 - clgr %r5,%r4 - je .Lhsaskip - xr %r0, %r0 - clgr %r0, %r9 # did we detect memory? - je .Ldonemem # if not, leave - chi %r10, 0 # do we have chunks left? - je .Ldonemem + lghi %r4,1 + sllg %r4,%r4,31 + clgr %r5,%r4 + je .Lhsaskip + xr %r0, %r0 + clgr %r0, %r9 # did we detect memory? + je .Ldonemem # if not, leave + chi %r10, 0 # do we have chunks left? + je .Ldonemem .Lhsaskip: - algr %r5,%r1 # add 128KB to end of chunk - lgr %r4,%r5 # potential new chunk - clgr %r5,%r9 # should we go on? - jl .Lloop -.Ldonemem: + algr %r5,%r1 # add 128KB to end of chunk + lgr %r4,%r5 # potential new chunk + clgr %r5,%r9 # should we go on? + jl .Lloop +.Ldonemem: - larl %r12,machine_flags + larl %r12,machine_flags # # find out if we are running under VM # - stidp __LC_CPUID # store cpuid - tm __LC_CPUID,0xff # running under VM ? - bno 0f-.LPG1(%r13) - oi 7(%r12),1 # set VM flag -0: lh %r0,__LC_CPUID+4 # get cpu version - chi %r0,0x7490 # running on a P/390 ? - bne 1f-.LPG1(%r13) - oi 7(%r12),4 # set P/390 flag + stidp __LC_CPUID # store cpuid + tm __LC_CPUID,0xff # running under VM ? + bno 0f-.LPG1(%r13) + oi 7(%r12),1 # set VM flag +0: lh %r0,__LC_CPUID+4 # get cpu version + chi %r0,0x7490 # running on a P/390 ? + bne 1f-.LPG1(%r13) + oi 7(%r12),4 # set P/390 flag 1: # # find out if we have the MVPG instruction # - la %r1,0f-.LPG1(%r13) # set program check address - stg %r1,__LC_PGM_NEW_PSW+8 - sgr %r0,%r0 - lghi %r1,0 - lghi %r2,0 - mvpg %r1,%r2 # test MVPG instruction - oi 7(%r12),16 # set MVPG flag + la %r1,0f-.LPG1(%r13) # set program check address + stg %r1,__LC_PGM_NEW_PSW+8 + sgr %r0,%r0 + lghi %r1,0 + lghi %r2,0 + mvpg %r1,%r2 # test MVPG instruction + oi 7(%r12),16 # set MVPG flag 0: # # find out if the diag 0x44 works in 64 bit mode # - la %r1,0f-.LPG1(%r13) # set program check address - stg %r1,__LC_PGM_NEW_PSW+8 - diag 0,0,0x44 # test diag 0x44 - oi 7(%r12),32 # set diag44 flag -0: + la %r1,0f-.LPG1(%r13) # set program check address + stg %r1,__LC_PGM_NEW_PSW+8 + diag 0,0,0x44 # test diag 0x44 + oi 7(%r12),32 # set diag44 flag +0: # # find out if we have the IDTE instruction # - la %r1,0f-.LPG1(%r13) # set program check address - stg %r1,__LC_PGM_NEW_PSW+8 + la %r1,0f-.LPG1(%r13) # set program check address + stg %r1,__LC_PGM_NEW_PSW+8 .long 0xb2b10000 # store facility list tm 0xc8,0x08 # check bit for clearing-by-ASCE bno 0f-.LPG1(%r13) @@ -263,45 +263,45 @@ startup_continue: oi 6(%r12),2 # set MVCOS flag 1: - lpswe .Lentry-.LPG1(13) # jump to _stext in primary-space, - # virtual and never return ... - .align 16 -.Lentry:.quad 0x0000000180000000,_stext -.Lctl: .quad 0x04b50002 # cr0: various things - .quad 0 # cr1: primary space segment table - .quad .Lduct # cr2: dispatchable unit control table - .quad 0 # cr3: instruction authorization - .quad 0 # cr4: instruction authorization - .quad 0xffffffffffffffff # cr5: primary-aste origin - .quad 0 # cr6: I/O interrupts - .quad 0 # cr7: secondary space segment table - .quad 0 # cr8: access registers translation - .quad 0 # cr9: tracing off - .quad 0 # cr10: tracing off - .quad 0 # cr11: tracing off - .quad 0 # cr12: tracing off - .quad 0 # cr13: home space segment table - .quad 0xc0000000 # cr14: machine check handling off - .quad 0 # cr15: linkage stack operations -.Lduct: .long 0,0,0,0,0,0,0,0 - .long 0,0,0,0,0,0,0,0 -.Lpcmsk:.quad 0x0000000180000000 + lpswe .Lentry-.LPG1(13) # jump to _stext in primary-space, + # virtual and never return ... + .align 16 +.Lentry:.quad 0x0000000180000000,_stext +.Lctl: .quad 0x04b50002 # cr0: various things + .quad 0 # cr1: primary space segment table + .quad .Lduct # cr2: dispatchable unit control table + .quad 0 # cr3: instruction authorization + .quad 0 # cr4: instruction authorization + .quad 0xffffffffffffffff # cr5: primary-aste origin + .quad 0 # cr6: I/O interrupts + .quad 0 # cr7: secondary space segment table + .quad 0 # cr8: access registers translation + .quad 0 # cr9: tracing off + .quad 0 # cr10: tracing off + .quad 0 # cr11: tracing off + .quad 0 # cr12: tracing off + .quad 0 # cr13: home space segment table + .quad 0xc0000000 # cr14: machine check handling off + .quad 0 # cr15: linkage stack operations +.Lduct: .long 0,0,0,0,0,0,0,0 + .long 0,0,0,0,0,0,0,0 +.Lpcmsk:.quad 0x0000000180000000 .L4malign:.quad 0xffffffffffc00000 -.Lscan2g:.quad 0x80000000 + 0x20000 - 8 # 2GB + 128K - 8 -.Lnop: .long 0x07000700 +.Lscan2g:.quad 0x80000000 + 0x20000 - 8 # 2GB + 128K - 8 +.Lnop: .long 0x07000700 .Lparmaddr: .quad PARMAREA - .globl ipl_schib + .globl ipl_schib ipl_schib: .rept 13 .long 0 .endr - .globl ipl_flags + .globl ipl_flags ipl_flags: - .long 0 - .globl ipl_devno + .long 0 + .globl ipl_devno ipl_devno: .word 0 @@ -309,47 +309,47 @@ ipl_devno: .globl s390_readinfo_sccb s390_readinfo_sccb: .Lsccb: - .hword 0x1000 # length, one page - .byte 0x00,0x00,0x00 - .byte 0x80 # variable response bit set + .hword 0x1000 # length, one page + .byte 0x00,0x00,0x00 + .byte 0x80 # variable response bit set .Lsccbr: - .hword 0x00 # response code + .hword 0x00 # response code .Lscpincr1: - .hword 0x00 + .hword 0x00 .Lscpa1: - .byte 0x00 - .fill 89,1,0 + .byte 0x00 + .fill 89,1,0 .Lscpa2: - .int 0x00 + .int 0x00 .Lscpincr2: - .quad 0x00 - .fill 3984,1,0 + .quad 0x00 + .fill 3984,1,0 .org 0x13000 #ifdef CONFIG_SHARED_KERNEL - .org 0x100000 + .org 0x100000 #endif - + # # startup-code, running in absolute addressing mode # - .globl _stext -_stext: basr %r13,0 # get base + .globl _stext +_stext: basr %r13,0 # get base .LPG3: # check control registers - stctg %c0,%c15,0(%r15) - oi 6(%r15),0x40 # enable sigp emergency signal - oi 4(%r15),0x10 # switch on low address proctection - lctlg %c0,%c15,0(%r15) + stctg %c0,%c15,0(%r15) + oi 6(%r15),0x40 # enable sigp emergency signal + oi 4(%r15),0x10 # switch on low address proctection + lctlg %c0,%c15,0(%r15) - lam 0,15,.Laregs-.LPG3(%r13) # load access regs needed by uaccess - brasl %r14,start_kernel # go to C code + lam 0,15,.Laregs-.LPG3(%r13) # load acrs needed by uaccess + brasl %r14,start_kernel # go to C code # # We returned from start_kernel ?!? PANIK # - basr %r13,0 - lpswe .Ldw-.(%r13) # load disabled wait psw + basr %r13,0 + lpswe .Ldw-.(%r13) # load disabled wait psw - .align 8 -.Ldw: .quad 0x0002000180000000,0x0000000000000000 -.Laregs: .long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 + .align 8 +.Ldw: .quad 0x0002000180000000,0x0000000000000000 +.Laregs:.long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 -- cgit v1.1