From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- arch/ppc/syslib/ppc85xx_setup.c | 354 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 354 insertions(+) create mode 100644 arch/ppc/syslib/ppc85xx_setup.c (limited to 'arch/ppc/syslib/ppc85xx_setup.c') diff --git a/arch/ppc/syslib/ppc85xx_setup.c b/arch/ppc/syslib/ppc85xx_setup.c new file mode 100644 index 0000000..81f1968 --- /dev/null +++ b/arch/ppc/syslib/ppc85xx_setup.c @@ -0,0 +1,354 @@ +/* + * arch/ppc/syslib/ppc85xx_setup.c + * + * MPC85XX common board code + * + * Maintainer: Kumar Gala + * + * Copyright 2004 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include /* for linux/serial_core.h */ +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include + +/* Return the amount of memory */ +unsigned long __init +mpc85xx_find_end_of_memory(void) +{ + bd_t *binfo; + + binfo = (bd_t *) __res; + + return binfo->bi_memsize; +} + +/* The decrementer counts at the system (internal) clock freq divided by 8 */ +void __init +mpc85xx_calibrate_decr(void) +{ + bd_t *binfo = (bd_t *) __res; + unsigned int freq, divisor; + + /* get the core frequency */ + freq = binfo->bi_busfreq; + + /* The timebase is updated every 8 bus clocks, HID0[SEL_TBCLK] = 0 */ + divisor = 8; + tb_ticks_per_jiffy = freq / divisor / HZ; + tb_to_us = mulhwu_scale_factor(freq / divisor, 1000000); + + /* Set the time base to zero */ + mtspr(SPRN_TBWL, 0); + mtspr(SPRN_TBWU, 0); + + /* Clear any pending timer interrupts */ + mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS); + + /* Enable decrementer interrupt */ + mtspr(SPRN_TCR, TCR_DIE); +} + +#ifdef CONFIG_SERIAL_8250 +void __init +mpc85xx_early_serial_map(void) +{ +#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB) + struct uart_port serial_req; +#endif + struct plat_serial8250_port *pdata; + bd_t *binfo = (bd_t *) __res; + pdata = (struct plat_serial8250_port *) ppc_sys_get_pdata(MPC85xx_DUART); + + /* Setup serial port access */ + pdata[0].uartclk = binfo->bi_busfreq; + pdata[0].mapbase += binfo->bi_immr_base; + pdata[0].membase = ioremap(pdata[0].mapbase, MPC85xx_UART0_SIZE); + +#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB) + memset(&serial_req, 0, sizeof (serial_req)); + serial_req.iotype = SERIAL_IO_MEM; + serial_req.mapbase = pdata[0].mapbase; + serial_req.membase = pdata[0].membase; + serial_req.regshift = 0; + + gen550_init(0, &serial_req); +#endif + + pdata[1].uartclk = binfo->bi_busfreq; + pdata[1].mapbase += binfo->bi_immr_base; + pdata[1].membase = ioremap(pdata[1].mapbase, MPC85xx_UART0_SIZE); + +#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB) + /* Assume gen550_init() doesn't modify serial_req */ + serial_req.mapbase = pdata[1].mapbase; + serial_req.membase = pdata[1].membase; + + gen550_init(1, &serial_req); +#endif +} +#endif + +void +mpc85xx_restart(char *cmd) +{ + local_irq_disable(); + abort(); +} + +void +mpc85xx_power_off(void) +{ + local_irq_disable(); + for(;;); +} + +void +mpc85xx_halt(void) +{ + local_irq_disable(); + for(;;); +} + +#ifdef CONFIG_PCI +static void __init +mpc85xx_setup_pci1(struct pci_controller *hose) +{ + volatile struct ccsr_pci *pci; + volatile struct ccsr_guts *guts; + unsigned short temps; + bd_t *binfo = (bd_t *) __res; + + pci = ioremap(binfo->bi_immr_base + MPC85xx_PCI1_OFFSET, + MPC85xx_PCI1_SIZE); + + guts = ioremap(binfo->bi_immr_base + MPC85xx_GUTS_OFFSET, + MPC85xx_GUTS_SIZE); + + early_read_config_word(hose, 0, 0, PCI_COMMAND, &temps); + temps |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + early_write_config_word(hose, 0, 0, PCI_COMMAND, temps); + +#define PORDEVSR_PCI (0x00800000) /* PCI Mode */ + if (guts->pordevsr & PORDEVSR_PCI) { + early_write_config_byte(hose, 0, 0, PCI_LATENCY_TIMER, 0x80); + } else { + /* PCI-X init */ + temps = PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ + | PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E; + early_write_config_word(hose, 0, 0, PCIX_COMMAND, temps); + } + + /* Disable all windows (except powar0 since its ignored) */ + pci->powar1 = 0; + pci->powar2 = 0; + pci->powar3 = 0; + pci->powar4 = 0; + pci->piwar1 = 0; + pci->piwar2 = 0; + pci->piwar3 = 0; + + /* Setup Phys:PCI 1:1 outbound mem window @ MPC85XX_PCI1_LOWER_MEM */ + pci->potar1 = (MPC85XX_PCI1_LOWER_MEM >> 12) & 0x000fffff; + pci->potear1 = 0x00000000; + pci->powbar1 = (MPC85XX_PCI1_LOWER_MEM >> 12) & 0x000fffff; + /* Enable, Mem R/W */ + pci->powar1 = 0x80044000 | + (__ilog2(MPC85XX_PCI1_UPPER_MEM - MPC85XX_PCI1_LOWER_MEM + 1) - 1); + + /* Setup outboud IO windows @ MPC85XX_PCI1_IO_BASE */ + pci->potar2 = 0x00000000; + pci->potear2 = 0x00000000; + pci->powbar2 = (MPC85XX_PCI1_IO_BASE >> 12) & 0x000fffff; + /* Enable, IO R/W */ + pci->powar2 = 0x80088000 | (__ilog2(MPC85XX_PCI1_IO_SIZE) - 1); + + /* Setup 2G inbound Memory Window @ 0 */ + pci->pitar1 = 0x00000000; + pci->piwbar1 = 0x00000000; + pci->piwar1 = 0xa0f5501e; /* Enable, Prefetch, Local + Mem, Snoop R/W, 2G */ +} + + +extern int mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin); +extern int mpc85xx_exclude_device(u_char bus, u_char devfn); + +#ifdef CONFIG_85xx_PCI2 +static void __init +mpc85xx_setup_pci2(struct pci_controller *hose) +{ + volatile struct ccsr_pci *pci; + unsigned short temps; + bd_t *binfo = (bd_t *) __res; + + pci = ioremap(binfo->bi_immr_base + MPC85xx_PCI2_OFFSET, + MPC85xx_PCI2_SIZE); + + early_read_config_word(hose, hose->bus_offset, 0, PCI_COMMAND, &temps); + temps |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + early_write_config_word(hose, hose->bus_offset, 0, PCI_COMMAND, temps); + early_write_config_byte(hose, hose->bus_offset, 0, PCI_LATENCY_TIMER, 0x80); + + /* Disable all windows (except powar0 since its ignored) */ + pci->powar1 = 0; + pci->powar2 = 0; + pci->powar3 = 0; + pci->powar4 = 0; + pci->piwar1 = 0; + pci->piwar2 = 0; + pci->piwar3 = 0; + + /* Setup Phys:PCI 1:1 outbound mem window @ MPC85XX_PCI2_LOWER_MEM */ + pci->potar1 = (MPC85XX_PCI2_LOWER_MEM >> 12) & 0x000fffff; + pci->potear1 = 0x00000000; + pci->powbar1 = (MPC85XX_PCI2_LOWER_MEM >> 12) & 0x000fffff; + /* Enable, Mem R/W */ + pci->powar1 = 0x80044000 | + (__ilog2(MPC85XX_PCI1_UPPER_MEM - MPC85XX_PCI1_LOWER_MEM + 1) - 1); + + /* Setup outboud IO windows @ MPC85XX_PCI2_IO_BASE */ + pci->potar2 = 0x00000000; + pci->potear2 = 0x00000000; + pci->powbar2 = (MPC85XX_PCI2_IO_BASE >> 12) & 0x000fffff; + /* Enable, IO R/W */ + pci->powar2 = 0x80088000 | (__ilog2(MPC85XX_PCI1_IO_SIZE) - 1); + + /* Setup 2G inbound Memory Window @ 0 */ + pci->pitar1 = 0x00000000; + pci->piwbar1 = 0x00000000; + pci->piwar1 = 0xa0f5501e; /* Enable, Prefetch, Local + Mem, Snoop R/W, 2G */ +} +#endif /* CONFIG_85xx_PCI2 */ + +int mpc85xx_pci1_last_busno = 0; + +void __init +mpc85xx_setup_hose(void) +{ + struct pci_controller *hose_a; +#ifdef CONFIG_85xx_PCI2 + struct pci_controller *hose_b; +#endif + bd_t *binfo = (bd_t *) __res; + + hose_a = pcibios_alloc_controller(); + + if (!hose_a) + return; + + ppc_md.pci_swizzle = common_swizzle; + ppc_md.pci_map_irq = mpc85xx_map_irq; + + hose_a->first_busno = 0; + hose_a->bus_offset = 0; + hose_a->last_busno = 0xff; + + setup_indirect_pci(hose_a, binfo->bi_immr_base + PCI1_CFG_ADDR_OFFSET, + binfo->bi_immr_base + PCI1_CFG_DATA_OFFSET); + hose_a->set_cfg_type = 1; + + mpc85xx_setup_pci1(hose_a); + + hose_a->pci_mem_offset = MPC85XX_PCI1_MEM_OFFSET; + hose_a->mem_space.start = MPC85XX_PCI1_LOWER_MEM; + hose_a->mem_space.end = MPC85XX_PCI1_UPPER_MEM; + + hose_a->io_space.start = MPC85XX_PCI1_LOWER_IO; + hose_a->io_space.end = MPC85XX_PCI1_UPPER_IO; + hose_a->io_base_phys = MPC85XX_PCI1_IO_BASE; +#ifdef CONFIG_85xx_PCI2 + isa_io_base = + (unsigned long) ioremap(MPC85XX_PCI1_IO_BASE, + MPC85XX_PCI1_IO_SIZE + + MPC85XX_PCI2_IO_SIZE); +#else + isa_io_base = + (unsigned long) ioremap(MPC85XX_PCI1_IO_BASE, + MPC85XX_PCI1_IO_SIZE); +#endif + hose_a->io_base_virt = (void *) isa_io_base; + + /* setup resources */ + pci_init_resource(&hose_a->mem_resources[0], + MPC85XX_PCI1_LOWER_MEM, + MPC85XX_PCI1_UPPER_MEM, + IORESOURCE_MEM, "PCI1 host bridge"); + + pci_init_resource(&hose_a->io_resource, + MPC85XX_PCI1_LOWER_IO, + MPC85XX_PCI1_UPPER_IO, + IORESOURCE_IO, "PCI1 host bridge"); + + ppc_md.pci_exclude_device = mpc85xx_exclude_device; + + hose_a->last_busno = pciauto_bus_scan(hose_a, hose_a->first_busno); + +#ifdef CONFIG_85xx_PCI2 + hose_b = pcibios_alloc_controller(); + + if (!hose_b) + return; + + hose_b->bus_offset = hose_a->last_busno + 1; + hose_b->first_busno = hose_a->last_busno + 1; + hose_b->last_busno = 0xff; + + setup_indirect_pci(hose_b, binfo->bi_immr_base + PCI2_CFG_ADDR_OFFSET, + binfo->bi_immr_base + PCI2_CFG_DATA_OFFSET); + hose_b->set_cfg_type = 1; + + mpc85xx_setup_pci2(hose_b); + + hose_b->pci_mem_offset = MPC85XX_PCI2_MEM_OFFSET; + hose_b->mem_space.start = MPC85XX_PCI2_LOWER_MEM; + hose_b->mem_space.end = MPC85XX_PCI2_UPPER_MEM; + + hose_b->io_space.start = MPC85XX_PCI2_LOWER_IO; + hose_b->io_space.end = MPC85XX_PCI2_UPPER_IO; + hose_b->io_base_phys = MPC85XX_PCI2_IO_BASE; + hose_b->io_base_virt = (void *) isa_io_base + MPC85XX_PCI1_IO_SIZE; + + /* setup resources */ + pci_init_resource(&hose_b->mem_resources[0], + MPC85XX_PCI2_LOWER_MEM, + MPC85XX_PCI2_UPPER_MEM, + IORESOURCE_MEM, "PCI2 host bridge"); + + pci_init_resource(&hose_b->io_resource, + MPC85XX_PCI2_LOWER_IO, + MPC85XX_PCI2_UPPER_IO, + IORESOURCE_IO, "PCI2 host bridge"); + + hose_b->last_busno = pciauto_bus_scan(hose_b, hose_b->first_busno); + + /* let board code know what the last bus number was on PCI1 */ + mpc85xx_pci1_last_busno = hose_a->last_busno; +#endif + return; +} +#endif /* CONFIG_PCI */ + + -- cgit v1.1