From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- arch/ppc/8xx_io/commproc.c | 464 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 464 insertions(+) create mode 100644 arch/ppc/8xx_io/commproc.c (limited to 'arch/ppc/8xx_io/commproc.c') diff --git a/arch/ppc/8xx_io/commproc.c b/arch/ppc/8xx_io/commproc.c new file mode 100644 index 0000000..0cc2e7a --- /dev/null +++ b/arch/ppc/8xx_io/commproc.c @@ -0,0 +1,464 @@ +/* + * General Purpose functions for the global management of the + * Communication Processor Module. + * Copyright (c) 1997 Dan Malek (dmalek@jlc.net) + * + * In addition to the individual control of the communication + * channels, there are a few functions that globally affect the + * communication processor. + * + * Buffer descriptors must be allocated from the dual ported memory + * space. The allocator for that is here. When the communication + * process is reset, we reclaim the memory available. There is + * currently no deallocator for this memory. + * The amount of space available is platform dependent. On the + * MBX, the EPPC software loads additional microcode into the + * communication processor, and uses some of the DP ram for this + * purpose. Current, the first 512 bytes and the last 256 bytes of + * memory are used. Right now I am conservative and only use the + * memory that can never be used for microcode. If there are + * applications that require more DP ram, we can expand the boundaries + * but then we have to be careful of any downloaded microcode. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +extern int get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep); + +static void m8xx_cpm_dpinit(void); +static uint host_buffer; /* One page of host buffer */ +static uint host_end; /* end + 1 */ +cpm8xx_t *cpmp; /* Pointer to comm processor space */ + +/* CPM interrupt vector functions. +*/ +struct cpm_action { + void (*handler)(void *, struct pt_regs * regs); + void *dev_id; +}; +static struct cpm_action cpm_vecs[CPMVEC_NR]; +static irqreturn_t cpm_interrupt(int irq, void * dev, struct pt_regs * regs); +static irqreturn_t cpm_error_interrupt(int irq, void *dev, struct pt_regs * regs); +static void alloc_host_memory(void); +/* Define a table of names to identify CPM interrupt handlers in + * /proc/interrupts. + */ +const char *cpm_int_name[] = + { "error", "PC4", "PC5", "SMC2", + "SMC1", "SPI", "PC6", "Timer 4", + "", "PC7", "PC8", "PC9", + "Timer 3", "", "PC10", "PC11", + "I2C", "RISC Timer", "Timer 2", "", + "IDMA2", "IDMA1", "SDMA error", "PC12", + "PC13", "Timer 1", "PC14", "SCC4", + "SCC3", "SCC2", "SCC1", "PC15" + }; + +static void +cpm_mask_irq(unsigned int irq) +{ + int cpm_vec = irq - CPM_IRQ_OFFSET; + + ((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr &= ~(1 << cpm_vec); +} + +static void +cpm_unmask_irq(unsigned int irq) +{ + int cpm_vec = irq - CPM_IRQ_OFFSET; + + ((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr |= (1 << cpm_vec); +} + +static void +cpm_ack(unsigned int irq) +{ + /* We do not need to do anything here. */ +} + +static void +cpm_eoi(unsigned int irq) +{ + int cpm_vec = irq - CPM_IRQ_OFFSET; + + ((immap_t *)IMAP_ADDR)->im_cpic.cpic_cisr = (1 << cpm_vec); +} + +struct hw_interrupt_type cpm_pic = { + .typename = " CPM ", + .enable = cpm_unmask_irq, + .disable = cpm_mask_irq, + .ack = cpm_ack, + .end = cpm_eoi, +}; + +extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr); + +void +m8xx_cpm_reset(uint bootpage) +{ + volatile immap_t *imp; + volatile cpm8xx_t *commproc; + pte_t *pte; + + imp = (immap_t *)IMAP_ADDR; + commproc = (cpm8xx_t *)&imp->im_cpm; + +#ifdef CONFIG_UCODE_PATCH + /* Perform a reset. + */ + commproc->cp_cpcr = (CPM_CR_RST | CPM_CR_FLG); + + /* Wait for it. + */ + while (commproc->cp_cpcr & CPM_CR_FLG); + + cpm_load_patch(imp); +#endif + + /* Set SDMA Bus Request priority 5. + * On 860T, this also enables FEC priority 6. I am not sure + * this is what we realy want for some applications, but the + * manual recommends it. + * Bit 25, FAM can also be set to use FEC aggressive mode (860T). + */ + imp->im_siu_conf.sc_sdcr = 1; + + /* Reclaim the DP memory for our use. */ + m8xx_cpm_dpinit(); + + /* get the PTE for the bootpage */ + if (!get_pteptr(&init_mm, bootpage, &pte)) + panic("get_pteptr failed\n"); + + /* and make it uncachable */ + pte_val(*pte) |= _PAGE_NO_CACHE; + _tlbie(bootpage); + + host_buffer = bootpage; + host_end = host_buffer + PAGE_SIZE; + + /* Tell everyone where the comm processor resides. + */ + cpmp = (cpm8xx_t *)commproc; +} + +/* We used to do this earlier, but have to postpone as long as possible + * to ensure the kernel VM is now running. + */ +static void +alloc_host_memory(void) +{ + dma_addr_t physaddr; + + /* Set the host page for allocation. + */ + host_buffer = (uint)dma_alloc_coherent(NULL, PAGE_SIZE, &physaddr, + GFP_KERNEL); + host_end = host_buffer + PAGE_SIZE; +} + +/* This is called during init_IRQ. We used to do it above, but this + * was too early since init_IRQ was not yet called. + */ +static struct irqaction cpm_error_irqaction = { + .handler = cpm_error_interrupt, + .mask = CPU_MASK_NONE, +}; +static struct irqaction cpm_interrupt_irqaction = { + .handler = cpm_interrupt, + .mask = CPU_MASK_NONE, + .name = "CPM cascade", +}; + +void +cpm_interrupt_init(void) +{ + int i; + + /* Initialize the CPM interrupt controller. + */ + ((immap_t *)IMAP_ADDR)->im_cpic.cpic_cicr = + (CICR_SCD_SCC4 | CICR_SCC_SCC3 | CICR_SCB_SCC2 | CICR_SCA_SCC1) | + ((CPM_INTERRUPT/2) << 13) | CICR_HP_MASK; + ((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr = 0; + + /* install the CPM interrupt controller routines for the CPM + * interrupt vectors + */ + for ( i = CPM_IRQ_OFFSET ; i < CPM_IRQ_OFFSET + NR_CPM_INTS ; i++ ) + irq_desc[i].handler = &cpm_pic; + + /* Set our interrupt handler with the core CPU. */ + if (setup_irq(CPM_INTERRUPT, &cpm_interrupt_irqaction)) + panic("Could not allocate CPM IRQ!"); + + /* Install our own error handler. */ + cpm_error_irqaction.name = cpm_int_name[CPMVEC_ERROR]; + if (setup_irq(CPM_IRQ_OFFSET + CPMVEC_ERROR, &cpm_error_irqaction)) + panic("Could not allocate CPM error IRQ!"); + + ((immap_t *)IMAP_ADDR)->im_cpic.cpic_cicr |= CICR_IEN; +} + +/* + * Get the CPM interrupt vector. + */ +int +cpm_get_irq(struct pt_regs *regs) +{ + int cpm_vec; + + /* Get the vector by setting the ACK bit and then reading + * the register. + */ + ((volatile immap_t *)IMAP_ADDR)->im_cpic.cpic_civr = 1; + cpm_vec = ((volatile immap_t *)IMAP_ADDR)->im_cpic.cpic_civr; + cpm_vec >>= 11; + + return cpm_vec; +} + +/* CPM interrupt controller cascade interrupt. +*/ +static irqreturn_t +cpm_interrupt(int irq, void * dev, struct pt_regs * regs) +{ + /* This interrupt handler never actually gets called. It is + * installed only to unmask the CPM cascade interrupt in the SIU + * and to make the CPM cascade interrupt visible in /proc/interrupts. + */ + return IRQ_HANDLED; +} + +/* The CPM can generate the error interrupt when there is a race condition + * between generating and masking interrupts. All we have to do is ACK it + * and return. This is a no-op function so we don't need any special + * tests in the interrupt handler. + */ +static irqreturn_t +cpm_error_interrupt(int irq, void *dev, struct pt_regs *regs) +{ + return IRQ_HANDLED; +} + +/* A helper function to translate the handler prototype required by + * request_irq() to the handler prototype required by cpm_install_handler(). + */ +static irqreturn_t +cpm_handler_helper(int irq, void *dev_id, struct pt_regs *regs) +{ + int cpm_vec = irq - CPM_IRQ_OFFSET; + + (*cpm_vecs[cpm_vec].handler)(dev_id, regs); + + return IRQ_HANDLED; +} + +/* Install a CPM interrupt handler. + * This routine accepts a CPM interrupt vector in the range 0 to 31. + * This routine is retained for backward compatibility. Rather than using + * this routine to install a CPM interrupt handler, you can now use + * request_irq() with an IRQ in the range CPM_IRQ_OFFSET to + * CPM_IRQ_OFFSET + NR_CPM_INTS - 1 (16 to 47). + * + * Notice that the prototype of the interrupt handler function must be + * different depending on whether you install the handler with + * request_irq() or cpm_install_handler(). + */ +void +cpm_install_handler(int cpm_vec, void (*handler)(void *, struct pt_regs *regs), + void *dev_id) +{ + int err; + + /* If null handler, assume we are trying to free the IRQ. + */ + if (!handler) { + free_irq(CPM_IRQ_OFFSET + cpm_vec, dev_id); + return; + } + + if (cpm_vecs[cpm_vec].handler != 0) + printk(KERN_INFO "CPM interrupt %x replacing %x\n", + (uint)handler, (uint)cpm_vecs[cpm_vec].handler); + cpm_vecs[cpm_vec].handler = handler; + cpm_vecs[cpm_vec].dev_id = dev_id; + + if ((err = request_irq(CPM_IRQ_OFFSET + cpm_vec, cpm_handler_helper, + 0, cpm_int_name[cpm_vec], dev_id))) + printk(KERN_ERR "request_irq() returned %d for CPM vector %d\n", + err, cpm_vec); +} + +/* Free a CPM interrupt handler. + * This routine accepts a CPM interrupt vector in the range 0 to 31. + * This routine is retained for backward compatibility. + */ +void +cpm_free_handler(int cpm_vec) +{ + request_irq(CPM_IRQ_OFFSET + cpm_vec, NULL, 0, 0, + cpm_vecs[cpm_vec].dev_id); + + cpm_vecs[cpm_vec].handler = NULL; + cpm_vecs[cpm_vec].dev_id = NULL; +} + +/* We also own one page of host buffer space for the allocation of + * UART "fifos" and the like. + */ +uint +m8xx_cpm_hostalloc(uint size) +{ + uint retloc; + + if (host_buffer == 0) + alloc_host_memory(); + + if ((host_buffer + size) >= host_end) + return(0); + + retloc = host_buffer; + host_buffer += size; + + return(retloc); +} + +/* Set a baud rate generator. This needs lots of work. There are + * four BRGs, any of which can be wired to any channel. + * The internal baud rate clock is the system clock divided by 16. + * This assumes the baudrate is 16x oversampled by the uart. + */ +#define BRG_INT_CLK (((bd_t *)__res)->bi_intfreq) +#define BRG_UART_CLK (BRG_INT_CLK/16) +#define BRG_UART_CLK_DIV16 (BRG_UART_CLK/16) + +void +cpm_setbrg(uint brg, uint rate) +{ + volatile uint *bp; + + /* This is good enough to get SMCs running..... + */ + bp = (uint *)&cpmp->cp_brgc1; + bp += brg; + /* The BRG has a 12-bit counter. For really slow baud rates (or + * really fast processors), we may have to further divide by 16. + */ + if (((BRG_UART_CLK / rate) - 1) < 4096) + *bp = (((BRG_UART_CLK / rate) - 1) << 1) | CPM_BRG_EN; + else + *bp = (((BRG_UART_CLK_DIV16 / rate) - 1) << 1) | + CPM_BRG_EN | CPM_BRG_DIV16; +} + +/* + * dpalloc / dpfree bits. + */ +static spinlock_t cpm_dpmem_lock; +/* + * 16 blocks should be enough to satisfy all requests + * until the memory subsystem goes up... + */ +static rh_block_t cpm_boot_dpmem_rh_block[16]; +static rh_info_t cpm_dpmem_info; + +#define CPM_DPMEM_ALIGNMENT 8 + +void m8xx_cpm_dpinit(void) +{ + cpm8xx_t *cp = &((immap_t *)IMAP_ADDR)->im_cpm; + + spin_lock_init(&cpm_dpmem_lock); + + /* Initialize the info header */ + rh_init(&cpm_dpmem_info, CPM_DPMEM_ALIGNMENT, + sizeof(cpm_boot_dpmem_rh_block) / + sizeof(cpm_boot_dpmem_rh_block[0]), + cpm_boot_dpmem_rh_block); + + /* + * Attach the usable dpmem area. + * XXX: This is actually crap. CPM_DATAONLY_BASE and + * CPM_DATAONLY_SIZE are a subset of the available dparm. It varies + * with the processor and the microcode patches applied / activated. + * But the following should be at least safe. + */ + rh_attach_region(&cpm_dpmem_info, (void *)CPM_DATAONLY_BASE, CPM_DATAONLY_SIZE); +} + +/* + * Allocate the requested size worth of DP memory. + * This function used to return an index into the DPRAM area. + * Now it returns the actuall physical address of that area. + * use m8xx_cpm_dpram_offset() to get the index + */ +uint cpm_dpalloc(uint size, uint align) +{ + void *start; + unsigned long flags; + + spin_lock_irqsave(&cpm_dpmem_lock, flags); + cpm_dpmem_info.alignment = align; + start = rh_alloc(&cpm_dpmem_info, size, "commproc"); + spin_unlock_irqrestore(&cpm_dpmem_lock, flags); + + return (uint)start; +} +EXPORT_SYMBOL(cpm_dpalloc); + +int cpm_dpfree(uint offset) +{ + int ret; + unsigned long flags; + + spin_lock_irqsave(&cpm_dpmem_lock, flags); + ret = rh_free(&cpm_dpmem_info, (void *)offset); + spin_unlock_irqrestore(&cpm_dpmem_lock, flags); + + return ret; +} +EXPORT_SYMBOL(cpm_dpfree); + +uint cpm_dpalloc_fixed(uint offset, uint size, uint align) +{ + void *start; + unsigned long flags; + + spin_lock_irqsave(&cpm_dpmem_lock, flags); + cpm_dpmem_info.alignment = align; + start = rh_alloc_fixed(&cpm_dpmem_info, (void *)offset, size, "commproc"); + spin_unlock_irqrestore(&cpm_dpmem_lock, flags); + + return (uint)start; +} +EXPORT_SYMBOL(cpm_dpalloc_fixed); + +void cpm_dpdump(void) +{ + rh_dump(&cpm_dpmem_info); +} +EXPORT_SYMBOL(cpm_dpdump); + +void *cpm_dpram_addr(uint offset) +{ + return ((immap_t *)IMAP_ADDR)->im_cpm.cp_dpmem + offset; +} +EXPORT_SYMBOL(cpm_dpram_addr); -- cgit v1.1