From 54b79248b24610663298e122c6ba3804468271fe Mon Sep 17 00:00:00 2001
From: Mike Kravetz <kravetz@us.ibm.com>
Date: Mon, 7 Nov 2005 16:25:48 -0800
Subject: [PATCH] revised Memory Add Fixes for ppc64

Add the create_section_mapping() routine to create hptes for memory
sections dynamically added after system boot.

Signed-off-by: Mike Kravetz <kravetz@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/mm/hash_utils_64.c | 9 +++++++++
 arch/powerpc/mm/mem.c           | 3 +++
 2 files changed, 12 insertions(+)

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index 22e4748..c8c9c2d 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -386,6 +386,15 @@ static unsigned long __init htab_get_table_size(void)
 	return pteg_count << 7;
 }
 
+#ifdef CONFIG_MEMORY_HOTPLUG
+void create_section_mapping(unsigned long start, unsigned long end)
+{
+		BUG_ON(htab_bolt_mapping(start, end, start,
+			_PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_COHERENT | PP_RWXX,
+			mmu_linear_psize));
+}
+#endif /* CONFIG_MEMORY_HOTPLUG */
+
 void __init htab_initialize(void)
 {
 	unsigned long table, htab_size_bytes;
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index 6f55efd..2ead0951 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -127,6 +127,9 @@ int __devinit add_memory(u64 start, u64 size)
 	unsigned long start_pfn = start >> PAGE_SHIFT;
 	unsigned long nr_pages = size >> PAGE_SHIFT;
 
+	start += KERNELBASE;
+	create_section_mapping(start, start + size);
+
 	/* this should work for most non-highmem platforms */
 	zone = pgdata->node_zones;
 
-- 
cgit v1.1


From dd7ccbd3eed52a42dc8bba57717dac3ece39b58e Mon Sep 17 00:00:00 2001
From: Mike Kravetz <kravetz@us.ibm.com>
Date: Fri, 4 Nov 2005 15:19:32 -0800
Subject: [PATCH] Memory Add Fixes for ppc64

memmap_init_zone() sets page count to 1.  Before 'freeing' the
page, we need to clear the count.  This is the same that is done
on free_all_bootmem_core() for memory discovered at boot time.

Signed-off-by: Mike Kravetz <kravetz@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/mm/mem.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index 2ead0951..1dd3cc6 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -110,6 +110,7 @@ EXPORT_SYMBOL(phys_mem_access_prot);
 void online_page(struct page *page)
 {
 	ClearPageReserved(page);
+	set_page_count(page, 0);
 	free_cold_page(page);
 	totalram_pages++;
 	num_physpages++;
-- 
cgit v1.1


From 7e9191daf643255c24893427f966795e4167ca2c Mon Sep 17 00:00:00 2001
From: Mike Kravetz <kravetz@us.ibm.com>
Date: Mon, 7 Nov 2005 09:39:48 -0800
Subject: [PATCH] Memory Add Fixes for ppc64

ppc64 needs a special sysfs probe file for adding new memory.

Signed-off-by: Mike Kravetz <kravetz@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/Kconfig | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 1493c78..ed31062 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -599,6 +599,10 @@ config HAVE_ARCH_EARLY_PFN_TO_NID
 	def_bool y
 	depends on NEED_MULTIPLE_NODES
 
+config ARCH_MEMORY_PROBE
+	def_bool y
+	depends on MEMORY_HOTPLUG
+
 # Some NUMA nodes have memory ranges that span
 # other nodes.  Even though a pfn is valid and
 # between a node's start and end pfns, it may not
-- 
cgit v1.1


From 3825ac0ee66b50cb0208ee74796fe65f3040e67c Mon Sep 17 00:00:00 2001
From: Paul Mackerras <paulus@samba.org>
Date: Tue, 8 Nov 2005 22:48:08 +1100
Subject: powerpc: Fix crash in early boot on some powermacs

Some powermac machines were crashing in the quiesce firmware call
in prom_init.c because we have just closed the OF stdin device;
notably my 1999 G3 powerbook does this.  To avoid this, don't
close the OF stdin device on powermacs.

Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/kernel/prom_init.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 6dc33d1..58f0917 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -2081,8 +2081,13 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4,
 	prom_printf("copying OF device tree ...\n");
 	flatten_device_tree();
 
-	/* in case stdin is USB and still active on IBM machines... */
-	prom_close_stdin();
+	/*
+	 * in case stdin is USB and still active on IBM machines...
+	 * Unfortunately quiesce crashes on some powermacs if we have
+	 * closed stdin already (in particular the powerbook 101).
+	 */
+	if (RELOC(of_platform) != PLATFORM_POWERMAC)
+		prom_close_stdin();
 
 	/*
 	 * Call OF "quiesce" method to shut down pending DMA's from
-- 
cgit v1.1


From fca5dcd4835ed09bb1a48a355344aff7a25c76e0 Mon Sep 17 00:00:00 2001
From: Paul Mackerras <paulus@samba.org>
Date: Tue, 8 Nov 2005 22:55:08 +1100
Subject: powerpc: Simplify and clean up the xmon terminal I/O

This factors out the common bits of arch/powerpc/xmon/start_*.c into
a new nonstdio.c, and removes some stuff that was supposed to make
xmon's I/O routines somewhat stdio-like but was never used.

It also makes the parsing of the xmon= command line option common,
so that ppc32 can now use xmon={off,on,early} also.

Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/kernel/setup-common.c |  21 +++
 arch/powerpc/kernel/setup_32.c     |  11 +-
 arch/powerpc/kernel/setup_64.c     |  20 ---
 arch/powerpc/xmon/Makefile         |   2 +-
 arch/powerpc/xmon/nonstdio.c       | 134 +++++++++++++++++++
 arch/powerpc/xmon/nonstdio.h       |  28 ++--
 arch/powerpc/xmon/start_32.c       | 235 ++++------------------------------
 arch/powerpc/xmon/start_64.c       | 167 +-----------------------
 arch/powerpc/xmon/start_8xx.c      | 255 +------------------------------------
 arch/powerpc/xmon/subr_prf.c       |  54 --------
 arch/powerpc/xmon/xmon.c           |  37 ++++--
 11 files changed, 236 insertions(+), 728 deletions(-)
 create mode 100644 arch/powerpc/xmon/nonstdio.c
 delete mode 100644 arch/powerpc/xmon/subr_prf.c

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index e22856e..26bb1fe 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -51,6 +51,7 @@
 #include <asm/page.h>
 #include <asm/mmu.h>
 #include <asm/lmb.h>
+#include <asm/xmon.h>
 
 #undef DEBUG
 
@@ -559,3 +560,23 @@ void __init smp_setup_cpu_maps(void)
 #endif /* CONFIG_PPC64 */
 }
 #endif /* CONFIG_SMP */
+
+#ifdef CONFIG_XMON
+static int __init early_xmon(char *p)
+{
+	/* ensure xmon is enabled */
+	if (p) {
+		if (strncmp(p, "on", 2) == 0)
+			xmon_init(1);
+		if (strncmp(p, "off", 3) == 0)
+			xmon_init(0);
+		if (strncmp(p, "early", 5) != 0)
+			return 0;
+	}
+	xmon_init(1);
+	debugger(NULL);
+
+	return 0;
+}
+early_param("xmon", early_xmon);
+#endif
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index 3af2631..0fbc73f 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -303,14 +303,9 @@ void __init setup_arch(char **cmdline_p)
 		pmac_feature_init();	/* New cool way */
 #endif
 
-#ifdef CONFIG_XMON
-	xmon_map_scc();
-	if (strstr(cmd_line, "xmon")) {
-		xmon_init(1);
-		debugger(NULL);
-	}
-#endif /* CONFIG_XMON */
-	if ( ppc_md.progress ) ppc_md.progress("setup_arch: enter", 0x3eab);
+#ifdef CONFIG_XMON_DEFAULT
+	xmon_init(1);
+#endif
 
 #if defined(CONFIG_KGDB)
 	if (ppc_md.kgdb_map_scc)
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 0471e84..54c606f 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -858,26 +858,6 @@ int check_legacy_ioport(unsigned long base_port)
 }
 EXPORT_SYMBOL(check_legacy_ioport);
 
-#ifdef CONFIG_XMON
-static int __init early_xmon(char *p)
-{
-	/* ensure xmon is enabled */
-	if (p) {
-		if (strncmp(p, "on", 2) == 0)
-			xmon_init(1);
-		if (strncmp(p, "off", 3) == 0)
-			xmon_init(0);
-		if (strncmp(p, "early", 5) != 0)
-			return 0;
-	}
-	xmon_init(1);
-	debugger(NULL);
-
-	return 0;
-}
-early_param("xmon", early_xmon);
-#endif
-
 void cpu_die(void)
 {
 	if (ppc_md.cpu_die)
diff --git a/arch/powerpc/xmon/Makefile b/arch/powerpc/xmon/Makefile
index 79a784f..b20312e 100644
--- a/arch/powerpc/xmon/Makefile
+++ b/arch/powerpc/xmon/Makefile
@@ -8,4 +8,4 @@ obj-$(CONFIG_8xx)	+= start_8xx.o
 obj-$(CONFIG_6xx)	+= start_32.o
 obj-$(CONFIG_4xx)	+= start_32.o
 obj-$(CONFIG_PPC64)	+= start_64.o
-obj-y			+= xmon.o ppc-dis.o ppc-opc.o subr_prf.o setjmp.o
+obj-y			+= xmon.o ppc-dis.o ppc-opc.o setjmp.o nonstdio.o
diff --git a/arch/powerpc/xmon/nonstdio.c b/arch/powerpc/xmon/nonstdio.c
new file mode 100644
index 0000000..7876583
--- /dev/null
+++ b/arch/powerpc/xmon/nonstdio.c
@@ -0,0 +1,134 @@
+/*
+ * Copyright (C) 1996-2005 Paul Mackerras.
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+#include <linux/string.h>
+#include <asm/time.h>
+#include "nonstdio.h"
+
+int xmon_putchar(int c)
+{
+	char ch = c;
+
+	if (c == '\n')
+		xmon_putchar('\r');
+	return xmon_write(&ch, 1) == 1? c: -1;
+}
+
+static char line[256];
+static char *lineptr;
+static int lineleft;
+
+int xmon_expect(const char *str, unsigned long timeout)
+{
+	int c;
+	unsigned long t0;
+
+	/* assume 25MHz default timebase if tb_ticks_per_sec not set yet */
+	timeout *= tb_ticks_per_sec? tb_ticks_per_sec: 25000000;
+	t0 = get_tbl();
+	do {
+		lineptr = line;
+		for (;;) {
+			c = xmon_read_poll();
+			if (c == -1) {
+				if (get_tbl() - t0 > timeout)
+					return 0;
+				continue;
+			}
+			if (c == '\n')
+				break;
+			if (c != '\r' && lineptr < &line[sizeof(line) - 1])
+				*lineptr++ = c;
+		}
+		*lineptr = 0;
+	} while (strstr(line, str) == NULL);
+	return 1;
+}
+
+int xmon_getchar(void)
+{
+	int c;
+
+	if (lineleft == 0) {
+		lineptr = line;
+		for (;;) {
+			c = xmon_readchar();
+			if (c == -1 || c == 4)
+				break;
+			if (c == '\r' || c == '\n') {
+				*lineptr++ = '\n';
+				xmon_putchar('\n');
+				break;
+			}
+			switch (c) {
+			case 0177:
+			case '\b':
+				if (lineptr > line) {
+					xmon_putchar('\b');
+					xmon_putchar(' ');
+					xmon_putchar('\b');
+					--lineptr;
+				}
+				break;
+			case 'U' & 0x1F:
+				while (lineptr > line) {
+					xmon_putchar('\b');
+					xmon_putchar(' ');
+					xmon_putchar('\b');
+					--lineptr;
+				}
+				break;
+			default:
+				if (lineptr >= &line[sizeof(line) - 1])
+					xmon_putchar('\a');
+				else {
+					xmon_putchar(c);
+					*lineptr++ = c;
+				}
+			}
+		}
+		lineleft = lineptr - line;
+		lineptr = line;
+	}
+	if (lineleft == 0)
+		return -1;
+	--lineleft;
+	return *lineptr++;
+}
+
+char *xmon_gets(char *str, int nb)
+{
+	char *p;
+	int c;
+
+	for (p = str; p < str + nb - 1; ) {
+		c = xmon_getchar();
+		if (c == -1) {
+			if (p == str)
+				return NULL;
+			break;
+		}
+		*p++ = c;
+		if (c == '\n')
+			break;
+	}
+	*p = 0;
+	return str;
+}
+
+void xmon_printf(const char *format, ...)
+{
+	va_list args;
+	int n;
+	static char xmon_outbuf[1024];
+
+	va_start(args, format);
+	n = vsnprintf(xmon_outbuf, sizeof(xmon_outbuf), format, args);
+	va_end(args);
+	xmon_write(xmon_outbuf, n);
+}
diff --git a/arch/powerpc/xmon/nonstdio.h b/arch/powerpc/xmon/nonstdio.h
index 84211a2..47cebbd 100644
--- a/arch/powerpc/xmon/nonstdio.h
+++ b/arch/powerpc/xmon/nonstdio.h
@@ -1,22 +1,14 @@
-typedef int	FILE;
-extern FILE *xmon_stdin, *xmon_stdout;
 #define EOF	(-1)
-#define stdin	xmon_stdin
-#define stdout	xmon_stdout
+
 #define printf	xmon_printf
-#define fprintf	xmon_fprintf
-#define fputs	xmon_fputs
-#define fgets	xmon_fgets
 #define putchar	xmon_putchar
-#define getchar	xmon_getchar
-#define putc	xmon_putc
-#define getc	xmon_getc
-#define fopen(n, m)	NULL
-#define fflush(f)	do {} while (0)
-#define fclose(f)	do {} while (0)
-extern char *fgets(char *, int, void *);
-extern void xmon_printf(const char *, ...);
-extern void xmon_fprintf(void *, const char *, ...);
-extern void xmon_sprintf(char *, const char *, ...);
 
-#define perror(s)	printf("%s: no files!\n", (s))
+extern int xmon_putchar(int c);
+extern int xmon_getchar(void);
+extern char *xmon_gets(char *, int);
+extern void xmon_printf(const char *, ...);
+extern void xmon_map_scc(void);
+extern int xmon_expect(const char *str, unsigned long timeout);
+extern int xmon_write(void *ptr, int nb);
+extern int xmon_readchar(void);
+extern int xmon_read_poll(void);
diff --git a/arch/powerpc/xmon/start_32.c b/arch/powerpc/xmon/start_32.c
index 69b658c..c2464df 100644
--- a/arch/powerpc/xmon/start_32.c
+++ b/arch/powerpc/xmon/start_32.c
@@ -11,7 +11,6 @@
 #include <linux/cuda.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
-#include <linux/sysrq.h>
 #include <linux/bitops.h>
 #include <asm/xmon.h>
 #include <asm/prom.h>
@@ -22,10 +21,11 @@
 #include <asm/processor.h>
 #include <asm/delay.h>
 #include <asm/btext.h>
+#include <asm/time.h>
+#include "nonstdio.h"
 
 static volatile unsigned char __iomem *sccc, *sccd;
 unsigned int TXRDY, RXRDY, DLAB;
-static int xmon_expect(const char *str, unsigned int timeout);
 
 static int use_serial;
 static int use_screen;
@@ -33,16 +33,6 @@ static int via_modem;
 static int xmon_use_sccb;
 static struct device_node *channel_node;
 
-#define TB_SPEED	25000000
-
-static inline unsigned int readtb(void)
-{
-	unsigned int ret;
-
-	asm volatile("mftb %0" : "=r" (ret) :);
-	return ret;
-}
-
 void buf_access(void)
 {
 	if (DLAB)
@@ -91,23 +81,7 @@ static unsigned long chrp_find_phys_io_base(void)
 }
 #endif /* CONFIG_PPC_CHRP */
 
-#ifdef CONFIG_MAGIC_SYSRQ
-static void sysrq_handle_xmon(int key, struct pt_regs *regs,
-			      struct tty_struct *tty)
-{
-	xmon(regs);
-}
-
-static struct sysrq_key_op sysrq_xmon_op =
-{
-	.handler =	sysrq_handle_xmon,
-	.help_msg =	"Xmon",
-	.action_msg =	"Entering xmon",
-};
-#endif
-
-void
-xmon_map_scc(void)
+void xmon_map_scc(void)
 {
 #ifdef CONFIG_PPC_MULTIPLATFORM
 	volatile unsigned char __iomem *base;
@@ -217,8 +191,6 @@ xmon_map_scc(void)
 	RXRDY = 1;
 	DLAB = 0x80;
 #endif /* platform */
-
-	register_sysrq_key('x', &sysrq_xmon_op);
 }
 
 static int scc_initialized = 0;
@@ -238,8 +210,7 @@ static inline void do_poll_adb(void)
 #endif /* CONFIG_ADB_CUDA */
 }
 
-int
-xmon_write(void *handle, void *ptr, int nb)
+int xmon_write(void *ptr, int nb)
 {
 	char *p = ptr;
 	int i, c, ct;
@@ -311,8 +282,7 @@ static unsigned char xmon_shift_keytab[128] =
 	"\0.\0*\0+\0\0\0\0\0/\r\0-\0"			/* 0x40 - 0x4f */
 	"\0\0000123456789\0\0\0";			/* 0x50 - 0x5f */
 
-static int
-xmon_get_adb_key(void)
+static int xmon_get_adb_key(void)
 {
 	int k, t, on;
 
@@ -350,32 +320,21 @@ xmon_get_adb_key(void)
 }
 #endif /* CONFIG_BOOTX_TEXT */
 
-int
-xmon_read(void *handle, void *ptr, int nb)
+int xmon_readchar(void)
 {
-    char *p = ptr;
-    int i;
-
 #ifdef CONFIG_BOOTX_TEXT
-    if (use_screen) {
-	for (i = 0; i < nb; ++i)
-	    *p++ = xmon_get_adb_key();
-	return i;
-    }
+	if (use_screen)
+		return xmon_get_adb_key();
 #endif
-    if (!scc_initialized)
-	xmon_init_scc();
-    for (i = 0; i < nb; ++i) {
+	if (!scc_initialized)
+		xmon_init_scc();
 	while ((*sccc & RXRDY) == 0)
-	    do_poll_adb();
+		do_poll_adb();
 	buf_access();
-	*p++ = *sccd;
-    }
-    return i;
+	return *sccd;
 }
 
-int
-xmon_read_poll(void)
+int xmon_read_poll(void)
 {
 	if ((*sccc & RXRDY) == 0) {
 		do_poll_adb();
@@ -395,8 +354,7 @@ static unsigned char scc_inittab[] = {
     3,  0xc1,		/* rx enable, 8 bits */
 };
 
-void
-xmon_init_scc(void)
+void xmon_init_scc(void)
 {
 	if ( _machine == _MACH_chrp )
 	{
@@ -410,6 +368,7 @@ xmon_init_scc(void)
 	else if ( _machine == _MACH_Pmac )
 	{
 		int i, x;
+		unsigned long timeout;
 
 		if (channel_node != 0)
 			pmac_call_feature(
@@ -424,8 +383,12 @@ xmon_init_scc(void)
 				PMAC_FTR_MODEM_ENABLE,
 				channel_node, 0, 1);
 			printk(KERN_INFO "Modem powered up by debugger !\n");
-			t0 = readtb();
-			while (readtb() - t0 < 3*TB_SPEED)
+			t0 = get_tbl();
+			timeout = 3 * tb_ticks_per_sec;
+			if (timeout == 0)
+				/* assume 25MHz if tb_ticks_per_sec not set */
+				timeout = 75000000;
+			while (get_tbl() - t0 < timeout)
 				eieio();
 		}
 		/* use the B channel if requested */
@@ -447,164 +410,19 @@ xmon_init_scc(void)
 	scc_initialized = 1;
 	if (via_modem) {
 		for (;;) {
-			xmon_write(NULL, "ATE1V1\r", 7);
+			xmon_write("ATE1V1\r", 7);
 			if (xmon_expect("OK", 5)) {
-				xmon_write(NULL, "ATA\r", 4);
+				xmon_write("ATA\r", 4);
 				if (xmon_expect("CONNECT", 40))
 					break;
 			}
-			xmon_write(NULL, "+++", 3);
+			xmon_write("+++", 3);
 			xmon_expect("OK", 3);
 		}
 	}
 }
 
-void *xmon_stdin;
-void *xmon_stdout;
-void *xmon_stderr;
-
-int xmon_putc(int c, void *f)
-{
-    char ch = c;
-
-    if (c == '\n')
-	xmon_putc('\r', f);
-    return xmon_write(f, &ch, 1) == 1? c: -1;
-}
-
-int xmon_putchar(int c)
-{
-	return xmon_putc(c, xmon_stdout);
-}
-
-int xmon_fputs(char *str, void *f)
-{
-	int n = strlen(str);
-
-	return xmon_write(f, str, n) == n? 0: -1;
-}
-
-int
-xmon_readchar(void)
-{
-	char ch;
-
-	for (;;) {
-		switch (xmon_read(xmon_stdin, &ch, 1)) {
-		case 1:
-			return ch;
-		case -1:
-			xmon_printf("read(stdin) returned -1\r\n", 0, 0);
-			return -1;
-		}
-	}
-}
-
-static char line[256];
-static char *lineptr;
-static int lineleft;
-
-int xmon_expect(const char *str, unsigned int timeout)
-{
-	int c;
-	unsigned int t0;
-
-	timeout *= TB_SPEED;
-	t0 = readtb();
-	do {
-		lineptr = line;
-		for (;;) {
-			c = xmon_read_poll();
-			if (c == -1) {
-				if (readtb() - t0 > timeout)
-					return 0;
-				continue;
-			}
-			if (c == '\n')
-				break;
-			if (c != '\r' && lineptr < &line[sizeof(line) - 1])
-				*lineptr++ = c;
-		}
-		*lineptr = 0;
-	} while (strstr(line, str) == NULL);
-	return 1;
-}
-
-int
-xmon_getchar(void)
-{
-    int c;
-
-    if (lineleft == 0) {
-	lineptr = line;
-	for (;;) {
-	    c = xmon_readchar();
-	    if (c == -1 || c == 4)
-		break;
-	    if (c == '\r' || c == '\n') {
-		*lineptr++ = '\n';
-		xmon_putchar('\n');
-		break;
-	    }
-	    switch (c) {
-	    case 0177:
-	    case '\b':
-		if (lineptr > line) {
-		    xmon_putchar('\b');
-		    xmon_putchar(' ');
-		    xmon_putchar('\b');
-		    --lineptr;
-		}
-		break;
-	    case 'U' & 0x1F:
-		while (lineptr > line) {
-		    xmon_putchar('\b');
-		    xmon_putchar(' ');
-		    xmon_putchar('\b');
-		    --lineptr;
-		}
-		break;
-	    default:
-		if (lineptr >= &line[sizeof(line) - 1])
-		    xmon_putchar('\a');
-		else {
-		    xmon_putchar(c);
-		    *lineptr++ = c;
-		}
-	    }
-	}
-	lineleft = lineptr - line;
-	lineptr = line;
-    }
-    if (lineleft == 0)
-	return -1;
-    --lineleft;
-    return *lineptr++;
-}
-
-char *
-xmon_fgets(char *str, int nb, void *f)
-{
-    char *p;
-    int c;
-
-    for (p = str; p < str + nb - 1; ) {
-	c = xmon_getchar();
-	if (c == -1) {
-	    if (p == str)
-		return NULL;
-	    break;
-	}
-	*p++ = c;
-	if (c == '\n')
-	    break;
-    }
-    *p = 0;
-    return str;
-}
-
-void
-xmon_enter(void)
+void xmon_enter(void)
 {
 #ifdef CONFIG_ADB_PMU
 	if (_machine == _MACH_Pmac) {
@@ -613,8 +431,7 @@ xmon_enter(void)
 #endif
 }
 
-void
-xmon_leave(void)
+void xmon_leave(void)
 {
 #ifdef CONFIG_ADB_PMU
 	if (_machine == _MACH_Pmac) {
diff --git a/arch/powerpc/xmon/start_64.c b/arch/powerpc/xmon/start_64.c
index e50c158..712552c 100644
--- a/arch/powerpc/xmon/start_64.c
+++ b/arch/powerpc/xmon/start_64.c
@@ -6,182 +6,29 @@
  *      as published by the Free Software Foundation; either version
  *      2 of the License, or (at your option) any later version.
  */
-#include <linux/config.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/sysrq.h>
-#include <linux/init.h>
 #include <asm/machdep.h>
-#include <asm/io.h>
-#include <asm/page.h>
-#include <asm/prom.h>
-#include <asm/processor.h>
 #include <asm/udbg.h>
-#include <asm/system.h>
 #include "nonstdio.h"
 
-#ifdef CONFIG_MAGIC_SYSRQ
-
-static void sysrq_handle_xmon(int key, struct pt_regs *pt_regs,
-			      struct tty_struct *tty) 
-{
-	/* ensure xmon is enabled */
-	xmon_init(1);
-	debugger(pt_regs);
-}
-
-static struct sysrq_key_op sysrq_xmon_op = 
+void xmon_map_scc(void)
 {
-	.handler =	sysrq_handle_xmon,
-	.help_msg =	"Xmon",
-	.action_msg =	"Entering xmon",
-};
-
-static int __init setup_xmon_sysrq(void)
-{
-	register_sysrq_key('x', &sysrq_xmon_op);
-	return 0;
 }
-__initcall(setup_xmon_sysrq);
-#endif /* CONFIG_MAGIC_SYSRQ */
 
-int
-xmon_write(void *handle, void *ptr, int nb)
+int xmon_write(void *ptr, int nb)
 {
 	return udbg_write(ptr, nb);
 }
 
-int
-xmon_read(void *handle, void *ptr, int nb)
+int xmon_readchar(void)
 {
-	return udbg_read(ptr, nb);
+	if (udbg_getc)
+		return udbg_getc();
+	return -1;
 }
 
-int
-xmon_read_poll(void)
+int xmon_read_poll(void)
 {
 	if (udbg_getc_poll)
 		return udbg_getc_poll();
 	return -1;
 }
- 
-FILE *xmon_stdin;
-FILE *xmon_stdout;
-
-int
-xmon_putc(int c, void *f)
-{
-	char ch = c;
-
-	if (c == '\n')
-		xmon_putc('\r', f);
-	return xmon_write(f, &ch, 1) == 1? c: -1;
-}
-
-int
-xmon_putchar(int c)
-{
-	return xmon_putc(c, xmon_stdout);
-}
-
-int
-xmon_fputs(char *str, void *f)
-{
-	int n = strlen(str);
-
-	return xmon_write(f, str, n) == n? 0: -1;
-}
-
-int
-xmon_readchar(void)
-{
-	char ch;
-
-	for (;;) {
-		switch (xmon_read(xmon_stdin, &ch, 1)) {
-		case 1:
-			return ch;
-		case -1:
-			xmon_printf("read(stdin) returned -1\r\n", 0, 0);
-			return -1;
-		}
-	}
-}
-
-static char line[256];
-static char *lineptr;
-static int lineleft;
-
-int
-xmon_getchar(void)
-{
-	int c;
-
-	if (lineleft == 0) {
-		lineptr = line;
-		for (;;) {
-			c = xmon_readchar();
-			if (c == -1 || c == 4)
-				break;
-			if (c == '\r' || c == '\n') {
-				*lineptr++ = '\n';
-				xmon_putchar('\n');
-				break;
-			}
-			switch (c) {
-			case 0177:
-			case '\b':
-				if (lineptr > line) {
-					xmon_putchar('\b');
-					xmon_putchar(' ');
-					xmon_putchar('\b');
-					--lineptr;
-				}
-				break;
-			case 'U' & 0x1F:
-				while (lineptr > line) {
-					xmon_putchar('\b');
-					xmon_putchar(' ');
-					xmon_putchar('\b');
-					--lineptr;
-				}
-				break;
-			default:
-				if (lineptr >= &line[sizeof(line) - 1])
-					xmon_putchar('\a');
-				else {
-					xmon_putchar(c);
-					*lineptr++ = c;
-				}
-			}
-		}
-		lineleft = lineptr - line;
-		lineptr = line;
-	}
-	if (lineleft == 0)
-		return -1;
-	--lineleft;
-	return *lineptr++;
-}
-
-char *
-xmon_fgets(char *str, int nb, void *f)
-{
-	char *p;
-	int c;
-
-	for (p = str; p < str + nb - 1; ) {
-		c = xmon_getchar();
-		if (c == -1) {
-			if (p == str)
-				return NULL;
-			break;
-		}
-		*p++ = c;
-		if (c == '\n')
-			break;
-	}
-	*p = 0;
-	return str;
-}
diff --git a/arch/powerpc/xmon/start_8xx.c b/arch/powerpc/xmon/start_8xx.c
index a48bd59..4c17b04 100644
--- a/arch/powerpc/xmon/start_8xx.c
+++ b/arch/powerpc/xmon/start_8xx.c
@@ -15,273 +15,30 @@
 #include <asm/8xx_immap.h>
 #include <asm/mpc8xx.h>
 #include <asm/commproc.h>
+#include "nonstdio.h"
 
-extern void xmon_printf(const char *fmt, ...);
 extern int xmon_8xx_write(char *str, int nb);
 extern int xmon_8xx_read_poll(void);
 extern int xmon_8xx_read_char(void);
-void prom_drawhex(uint);
-void prom_drawstring(const char *str);
 
-static int use_screen = 1; /* default */
-
-#define TB_SPEED	25000000
-
-static inline unsigned int readtb(void)
-{
-	unsigned int ret;
-
-	asm volatile("mftb %0" : "=r" (ret) :);
-	return ret;
-}
-
-void buf_access(void)
-{
-}
-
-void
-xmon_map_scc(void)
+void xmon_map_scc(void)
 {
-
 	cpmp = (cpm8xx_t *)&(((immap_t *)IMAP_ADDR)->im_cpm);
-	use_screen = 0;
-	
-	prom_drawstring("xmon uses serial port\n");
 }
 
-static int scc_initialized = 0;
-
 void xmon_init_scc(void);
 
-int
-xmon_write(void *handle, void *ptr, int nb)
+int xmon_write(void *ptr, int nb)
 {
-	char *p = ptr;
-	int i, c, ct;
-
-	if (!scc_initialized)
-		xmon_init_scc();
-
 	return(xmon_8xx_write(ptr, nb));
 }
 
-int xmon_wants_key;
-
-int
-xmon_read(void *handle, void *ptr, int nb)
+int xmon_readchar(void)
 {
-	char *p = ptr;
-	int i;
-
-	if (!scc_initialized)
-		xmon_init_scc();
-
-	for (i = 0; i < nb; ++i) {
-		*p++ = xmon_8xx_read_char();
-	}
-	return i;
+	return xmon_8xx_read_char();
 }
 
-int
-xmon_read_poll(void)
+int xmon_read_poll(void)
 {
 	return(xmon_8xx_read_poll());
 }
-
-void
-xmon_init_scc()
-{
-	scc_initialized = 1;
-}
-
-#if 0
-extern int (*prom_entry)(void *);
-
-int
-xmon_exit(void)
-{
-    struct prom_args {
-	char *service;
-    } args;
-
-    for (;;) {
-	args.service = "exit";
-	(*prom_entry)(&args);
-    }
-}
-#endif
-
-void *xmon_stdin;
-void *xmon_stdout;
-void *xmon_stderr;
-
-void
-xmon_init(void)
-{
-}
-
-int
-xmon_putc(int c, void *f)
-{
-    char ch = c;
-
-    if (c == '\n')
-	xmon_putc('\r', f);
-    return xmon_write(f, &ch, 1) == 1? c: -1;
-}
-
-int
-xmon_putchar(int c)
-{
-    return xmon_putc(c, xmon_stdout);
-}
-
-int
-xmon_fputs(char *str, void *f)
-{
-    int n = strlen(str);
-
-    return xmon_write(f, str, n) == n? 0: -1;
-}
-
-int
-xmon_readchar(void)
-{
-    char ch;
-
-    for (;;) {
-	switch (xmon_read(xmon_stdin, &ch, 1)) {
-	case 1:
-	    return ch;
-	case -1:
-	    xmon_printf("read(stdin) returned -1\r\n", 0, 0);
-	    return -1;
-	}
-    }
-}
-
-static char line[256];
-static char *lineptr;
-static int lineleft;
-
-#if 0
-int xmon_expect(const char *str, unsigned int timeout)
-{
-	int c;
-	unsigned int t0;
-
-	timeout *= TB_SPEED;
-	t0 = readtb();
-	do {
-		lineptr = line;
-		for (;;) {
-			c = xmon_read_poll();
-			if (c == -1) {
-				if (readtb() - t0 > timeout)
-					return 0;
-				continue;
-			}
-			if (c == '\n')
-				break;
-			if (c != '\r' && lineptr < &line[sizeof(line) - 1])
-				*lineptr++ = c;
-		}
-		*lineptr = 0;
-	} while (strstr(line, str) == NULL);
-	return 1;
-}
-#endif
-
-int
-xmon_getchar(void)
-{
-    int c;
-
-    if (lineleft == 0) {
-	lineptr = line;
-	for (;;) {
-	    c = xmon_readchar();
-	    if (c == -1 || c == 4)
-		break;
-	    if (c == '\r' || c == '\n') {
-		*lineptr++ = '\n';
-		xmon_putchar('\n');
-		break;
-	    }
-	    switch (c) {
-	    case 0177:
-	    case '\b':
-		if (lineptr > line) {
-		    xmon_putchar('\b');
-		    xmon_putchar(' ');
-		    xmon_putchar('\b');
-		    --lineptr;
-		}
-		break;
-	    case 'U' & 0x1F:
-		while (lineptr > line) {
-		    xmon_putchar('\b');
-		    xmon_putchar(' ');
-		    xmon_putchar('\b');
-		    --lineptr;
-		}
-		break;
-	    default:
-		if (lineptr >= &line[sizeof(line) - 1])
-		    xmon_putchar('\a');
-		else {
-		    xmon_putchar(c);
-		    *lineptr++ = c;
-		}
-	    }
-	}
-	lineleft = lineptr - line;
-	lineptr = line;
-    }
-    if (lineleft == 0)
-	return -1;
-    --lineleft;
-    return *lineptr++;
-}
-
-char *
-xmon_fgets(char *str, int nb, void *f)
-{
-    char *p;
-    int c;
-
-    for (p = str; p < str + nb - 1; ) {
-	c = xmon_getchar();
-	if (c == -1) {
-	    if (p == str)
-		return 0;
-	    break;
-	}
-	*p++ = c;
-	if (c == '\n')
-	    break;
-    }
-    *p = 0;
-    return str;
-}
-
-void
-prom_drawhex(uint val)
-{
-	unsigned char buf[10];
-
-	int i;
-	for (i = 7;  i >= 0;  i--)
-	{
-		buf[i] = "0123456789abcdef"[val & 0x0f];
-		val >>= 4;
-	}
-	buf[8] = '\0';
-	xmon_fputs(buf, xmon_stdout);
-}
-
-void
-prom_drawstring(const char *str)
-{
-	xmon_fputs(str, xmon_stdout);
-}
diff --git a/arch/powerpc/xmon/subr_prf.c b/arch/powerpc/xmon/subr_prf.c
deleted file mode 100644
index b48738c..0000000
--- a/arch/powerpc/xmon/subr_prf.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * Written by Cort Dougan to replace the version originally used
- * by Paul Mackerras, which came from NetBSD and thus had copyright
- * conflicts with Linux.
- *
- * This file makes liberal use of the standard linux utility
- * routines to reduce the size of the binary.  We assume we can
- * trust some parts of Linux inside the debugger.
- *   -- Cort (cort@cs.nmt.edu)
- *
- * Copyright (C) 1999 Cort Dougan.
- *
- *      This program is free software; you can redistribute it and/or
- *      modify it under the terms of the GNU General Public License
- *      as published by the Free Software Foundation; either version
- *      2 of the License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/module.h>
-#include <stdarg.h>
-#include "nonstdio.h"
-
-extern int xmon_write(void *, void *, int);
-
-void xmon_vfprintf(void *f, const char *fmt, va_list ap)
-{
-	static char xmon_buf[2048];
-	int n;
-
-	n = vsprintf(xmon_buf, fmt, ap);
-	xmon_write(f, xmon_buf, n);
-}
-
-void xmon_printf(const char *fmt, ...)
-{
-	va_list ap;
-
-	va_start(ap, fmt);
-	xmon_vfprintf(stdout, fmt, ap);
-	va_end(ap);
-}
-EXPORT_SYMBOL(xmon_printf);
-
-void xmon_fprintf(void *f, const char *fmt, ...)
-{
-	va_list ap;
-
-	va_start(ap, fmt);
-	xmon_vfprintf(f, fmt, ap);
-	va_end(ap);
-}
-
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index 1124f11..b43a574 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -1,7 +1,7 @@
 /*
  * Routines providing a simple monitor for use on the PowerMac.
  *
- * Copyright (C) 1996 Paul Mackerras.
+ * Copyright (C) 1996-2005 Paul Mackerras.
  *
  *      This program is free software; you can redistribute it and/or
  *      modify it under the terms of the GNU General Public License
@@ -18,6 +18,7 @@
 #include <linux/kallsyms.h>
 #include <linux/cpumask.h>
 #include <linux/module.h>
+#include <linux/sysrq.h>
 
 #include <asm/ptrace.h>
 #include <asm/string.h>
@@ -144,15 +145,10 @@ static void xmon_print_symbol(unsigned long address, const char *mid,
 static const char *getvecname(unsigned long vec);
 
 extern int print_insn_powerpc(unsigned long, unsigned long, int);
-extern void printf(const char *fmt, ...);
-extern void xmon_vfprintf(void *f, const char *fmt, va_list ap);
-extern int xmon_putc(int c, void *f);
-extern int putchar(int ch);
 
 extern void xmon_enter(void);
 extern void xmon_leave(void);
 
-extern int xmon_read_poll(void);
 extern long setjmp(long *);
 extern void longjmp(long *, long);
 extern void xmon_save_regs(struct pt_regs *);
@@ -748,7 +744,6 @@ cmds(struct pt_regs *excp)
 		printf("%x:", smp_processor_id());
 #endif /* CONFIG_SMP */
 		printf("mon> ");
-		fflush(stdout);
 		flush_input();
 		termch = 0;
 		cmd = skipbl();
@@ -2151,7 +2146,6 @@ memzcan(void)
 		ok = mread(a, &v, 1);
 		if (ok && !ook) {
 			printf("%.8x .. ", a);
-			fflush(stdout);
 		} else if (!ok && ook)
 			printf("%.8x\n", a - mskip);
 		ook = ok;
@@ -2372,7 +2366,7 @@ int
 inchar(void)
 {
 	if (lineptr == NULL || *lineptr == 0) {
-		if (fgets(line, sizeof(line), stdin) == NULL) {
+		if (xmon_gets(line, sizeof(line)) == NULL) {
 			lineptr = NULL;
 			return EOF;
 		}
@@ -2526,4 +2520,29 @@ void xmon_init(int enable)
 		__debugger_dabr_match = NULL;
 		__debugger_fault_handler = NULL;
 	}
+	xmon_map_scc();
 }
+
+#ifdef CONFIG_MAGIC_SYSRQ
+static void sysrq_handle_xmon(int key, struct pt_regs *pt_regs,
+			      struct tty_struct *tty) 
+{
+	/* ensure xmon is enabled */
+	xmon_init(1);
+	debugger(pt_regs);
+}
+
+static struct sysrq_key_op sysrq_xmon_op = 
+{
+	.handler =	sysrq_handle_xmon,
+	.help_msg =	"Xmon",
+	.action_msg =	"Entering xmon",
+};
+
+static int __init setup_xmon_sysrq(void)
+{
+	register_sysrq_key('x', &sysrq_xmon_op);
+	return 0;
+}
+__initcall(setup_xmon_sysrq);
+#endif /* CONFIG_MAGIC_SYSRQ */
-- 
cgit v1.1


From 66ba135c5a398df5c3a4b43d84d9df80cbc87c61 Mon Sep 17 00:00:00 2001
From: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Wed, 9 Nov 2005 11:01:06 +1100
Subject: powerpc: create kernel/setup.h

for functions defined by setup-common.c and used in setup_xx.c

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
---
 arch/powerpc/kernel/setup-common.c | 2 ++
 arch/powerpc/kernel/setup.h        | 6 ++++++
 arch/powerpc/kernel/setup_32.c     | 2 ++
 arch/powerpc/kernel/setup_64.c     | 2 ++
 4 files changed, 12 insertions(+)
 create mode 100644 arch/powerpc/kernel/setup.h

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 26bb1fe..17c46a2 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -53,6 +53,8 @@
 #include <asm/lmb.h>
 #include <asm/xmon.h>
 
+#include "setup.h"
+
 #undef DEBUG
 
 #ifdef DEBUG
diff --git a/arch/powerpc/kernel/setup.h b/arch/powerpc/kernel/setup.h
new file mode 100644
index 0000000..2ebba75
--- /dev/null
+++ b/arch/powerpc/kernel/setup.h
@@ -0,0 +1,6 @@
+#ifndef _POWERPC_KERNEL_SETUP_H
+#define _POWERPC_KERNEL_SETUP_H
+
+void check_for_initrd(void);
+
+#endif /* _POWERPC_KERNEL_SETUP_H */
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index 0fbc73f..55f485f 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -40,6 +40,8 @@
 #include <asm/xmon.h>
 #include <asm/time.h>
 
+#include "setup.h"
+
 #define DBG(fmt...)
 
 #if defined CONFIG_KGDB
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 54c606f..fe39aac 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -61,6 +61,8 @@
 #include <asm/xmon.h>
 #include <asm/udbg.h>
 
+#include "setup.h"
+
 #ifdef DEBUG
 #define DBG(fmt...) udbg_printf(fmt)
 #else
-- 
cgit v1.1


From b709c0832824da20a32a3119911b9f0cf6970452 Mon Sep 17 00:00:00 2001
From: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Wed, 9 Nov 2005 13:28:33 +1100
Subject: ppc64: move stack switching up in interrupt processing

This will make the ppc64 multiplatform irq handling more like
the generic handling.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
---
 arch/powerpc/kernel/misc_64.S | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S
index ae1433d..9d09f0a 100644
--- a/arch/powerpc/kernel/misc_64.S
+++ b/arch/powerpc/kernel/misc_64.S
@@ -89,12 +89,12 @@ _GLOBAL(call_do_softirq)
 	mtlr	r0
 	blr
 
-_GLOBAL(call_handle_IRQ_event)
+_GLOBAL(call_ppc_irq_dispatch_handler)
 	mflr	r0
 	std	r0,16(r1)
-	stdu	r1,THREAD_SIZE-112(r6)
-	mr	r1,r6
-	bl	.handle_IRQ_event
+	stdu	r1,THREAD_SIZE-112(r5)
+	mr	r1,r5
+	bl	.ppc_irq_dispatch_handler
 	ld	r1,0(r1)
 	ld	r0,16(r1)
 	mtlr	r0
-- 
cgit v1.1


From 5a7b3ff4670be3330842558dc5ae46ec3fc448e5 Mon Sep 17 00:00:00 2001
From: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Wed, 9 Nov 2005 15:07:16 +1100
Subject: ppc64: allow iSeries to use IRQSTACKS again

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
---
 arch/powerpc/platforms/iseries/irq.c | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/platforms/iseries/irq.c b/arch/powerpc/platforms/iseries/irq.c
index a06603d..a0ff7d9 100644
--- a/arch/powerpc/platforms/iseries/irq.c
+++ b/arch/powerpc/platforms/iseries/irq.c
@@ -103,6 +103,9 @@ static void intReceived(struct XmPciLpEvent *eventParm,
 		struct pt_regs *regsParm)
 {
 	int irq;
+#ifdef CONFIG_IRQSTACKS
+	struct thread_info *curtp, *irqtp;
+#endif
 
 	++Pci_Interrupt_Count;
 
@@ -110,7 +113,20 @@ static void intReceived(struct XmPciLpEvent *eventParm,
 	case XmPciLpEvent_SlotInterrupt:
 		irq = eventParm->hvLpEvent.xCorrelationToken;
 		/* Dispatch the interrupt handlers for this irq */
-		ppc_irq_dispatch_handler(regsParm, irq);
+#ifdef CONFIG_IRQSTACKS
+		/* Switch to the irq stack to handle this */
+		curtp = current_thread_info();
+		irqtp = hardirq_ctx[smp_processor_id()];
+		if (curtp != irqtp) {
+			irqtp->task = curtp->task;
+			irqtp->flags = 0;
+			call_ppc_irq_dispatch_handler(regsParm, irq, irqtp);
+			irqtp->task = NULL;
+			if (irqtp->flags)
+				set_bits(irqtp->flags, &curtp->flags);
+		} else
+#endif
+			ppc_irq_dispatch_handler(regsParm, irq);
 		HvCallPci_eoi(eventParm->eventData.slotInterrupt.busNumber,
 			eventParm->eventData.slotInterrupt.subBusNumber,
 			eventParm->eventData.slotInterrupt.deviceId);
-- 
cgit v1.1


From d4be4f37d9d2a5afc8e79a95beafbac4b83f20c5 Mon Sep 17 00:00:00 2001
From: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Wed, 9 Nov 2005 16:19:53 +1100
Subject: ppc64: remove ppc_irq_dispatch_handler

Use __do_IRQ instead.  The only difference is that every controller
is now assumed to have an end() routine (only xics_8259 did not).

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
---
 arch/powerpc/kernel/misc_64.S         |  4 ++--
 arch/powerpc/platforms/iseries/irq.c  | 10 ++++------
 arch/powerpc/platforms/pseries/xics.c |  1 +
 3 files changed, 7 insertions(+), 8 deletions(-)

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S
index 9d09f0a..ae48a00 100644
--- a/arch/powerpc/kernel/misc_64.S
+++ b/arch/powerpc/kernel/misc_64.S
@@ -89,12 +89,12 @@ _GLOBAL(call_do_softirq)
 	mtlr	r0
 	blr
 
-_GLOBAL(call_ppc_irq_dispatch_handler)
+_GLOBAL(call___do_IRQ)
 	mflr	r0
 	std	r0,16(r1)
 	stdu	r1,THREAD_SIZE-112(r5)
 	mr	r1,r5
-	bl	.ppc_irq_dispatch_handler
+	bl	.__do_IRQ
 	ld	r1,0(r1)
 	ld	r0,16(r1)
 	mtlr	r0
diff --git a/arch/powerpc/platforms/iseries/irq.c b/arch/powerpc/platforms/iseries/irq.c
index a0ff7d9..01090e9 100644
--- a/arch/powerpc/platforms/iseries/irq.c
+++ b/arch/powerpc/platforms/iseries/irq.c
@@ -120,13 +120,13 @@ static void intReceived(struct XmPciLpEvent *eventParm,
 		if (curtp != irqtp) {
 			irqtp->task = curtp->task;
 			irqtp->flags = 0;
-			call_ppc_irq_dispatch_handler(regsParm, irq, irqtp);
+			call___do_IRQ(irq, regsParm, irqtp);
 			irqtp->task = NULL;
 			if (irqtp->flags)
 				set_bits(irqtp->flags, &curtp->flags);
 		} else
 #endif
-			ppc_irq_dispatch_handler(regsParm, irq);
+			__do_IRQ(irq, regsParm);
 		HvCallPci_eoi(eventParm->eventData.slotInterrupt.busNumber,
 			eventParm->eventData.slotInterrupt.subBusNumber,
 			eventParm->eventData.slotInterrupt.deviceId);
@@ -326,10 +326,8 @@ static void iSeries_disable_IRQ(unsigned int irq)
 }
 
 /*
- * Need to define this so ppc_irq_dispatch_handler will NOT call
- * enable_IRQ at the end of interrupt handling.  However, this does
- * nothing because there is not enough information provided to do
- * the EOI HvCall.  This is done by XmPciLpEvent.c
+ * This does nothing because there is not enough information
+ * provided to do the EOI HvCall.  This is done by XmPciLpEvent.c
  */
 static void iSeries_end_IRQ(unsigned int irq)
 {
diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c
index c72c86f..405c4f3 100644
--- a/arch/powerpc/platforms/pseries/xics.c
+++ b/arch/powerpc/platforms/pseries/xics.c
@@ -567,6 +567,7 @@ nextnode:
 
 	xics_8259_pic.enable = i8259_pic.enable;
 	xics_8259_pic.disable = i8259_pic.disable;
+	xics_8259_pic.end = i8259_pic.end;
 	for (i = 0; i < 16; ++i)
 		get_irq_desc(i)->handler = &xics_8259_pic;
 	for (; i < NR_IRQS; ++i)
-- 
cgit v1.1


From 756e7104fefc82e3ebaa5f1da5ba6659c9c1cae5 Mon Sep 17 00:00:00 2001
From: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Wed, 9 Nov 2005 18:07:45 +1100
Subject: powerpc: merge irq.c

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
---
 arch/powerpc/kernel/Makefile          |   2 +-
 arch/powerpc/kernel/irq.c             | 478 ++++++++++++++++++++++++++++++++++
 arch/powerpc/platforms/powermac/pic.c |   3 +
 3 files changed, 482 insertions(+), 1 deletion(-)
 create mode 100644 arch/powerpc/kernel/irq.c

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index b3ae299..cbdc142 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -11,7 +11,7 @@ CFLAGS_btext.o		+= -fPIC
 endif
 
 obj-y				:= semaphore.o cputable.o ptrace.o syscalls.o \
-				   signal_32.o pmc.o
+				   irq.o signal_32.o pmc.o
 obj-$(CONFIG_PPC64)		+= setup_64.o binfmt_elf32.o sys_ppc32.o \
 				   signal_64.o ptrace32.o systbl.o
 obj-$(CONFIG_ALTIVEC)		+= vecemu.o vector.o
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
new file mode 100644
index 0000000..4b79406
--- /dev/null
+++ b/arch/powerpc/kernel/irq.c
@@ -0,0 +1,478 @@
+/*
+ *  arch/ppc/kernel/irq.c
+ *
+ *  Derived from arch/i386/kernel/irq.c
+ *    Copyright (C) 1992 Linus Torvalds
+ *  Adapted from arch/i386 by Gary Thomas
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *  Updated and modified by Cort Dougan <cort@fsmlabs.com>
+ *    Copyright (C) 1996-2001 Cort Dougan
+ *  Adapted for Power Macintosh by Paul Mackerras
+ *    Copyright (C) 1996 Paul Mackerras (paulus@cs.anu.edu.au)
+ *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * This file contains the code used by various IRQ handling routines:
+ * asking for different IRQ's should be done through these routines
+ * instead of just grabbing them. Thus setups with different IRQ numbers
+ * shouldn't result in any weird surprises, and installing new handlers
+ * should be easier.
+ *
+ * The MPC8xx has an interrupt mask in the SIU.  If a bit is set, the
+ * interrupt is _enabled_.  As expected, IRQ0 is bit 0 in the 32-bit
+ * mask register (of which only 16 are defined), hence the weird shifting
+ * and complement of the cached_irq_mask.  I want to be able to stuff
+ * this right into the SIU SMASK register.
+ * Many of the prep/chrp functions are conditional compiled on CONFIG_8xx
+ * to reduce code space and undefined function references.
+ */
+
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/threads.h>
+#include <linux/kernel_stat.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/ptrace.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/timex.h>
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/proc_fs.h>
+#include <linux/random.h>
+#include <linux/seq_file.h>
+#include <linux/cpumask.h>
+#include <linux/profile.h>
+#include <linux/bitops.h>
+#ifdef CONFIG_PPC64
+#include <linux/kallsyms.h>
+#endif
+
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/irq.h>
+#include <asm/cache.h>
+#include <asm/prom.h>
+#include <asm/ptrace.h>
+#include <asm/machdep.h>
+#ifdef CONFIG_PPC64
+#include <asm/iseries/it_lp_queue.h>
+#include <asm/paca.h>
+#endif
+
+static int ppc_spurious_interrupts;
+
+#if defined(CONFIG_PPC_ISERIES) && defined(CONFIG_SMP)
+extern void iSeries_smp_message_recv(struct pt_regs *);
+#endif
+
+#ifdef CONFIG_PPC32
+#define NR_MASK_WORDS	((NR_IRQS + 31) / 32)
+
+unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
+atomic_t ppc_n_lost_interrupts;
+
+#ifdef CONFIG_TAU_INT
+extern int tau_initialized;
+extern int tau_interrupts(int);
+#endif
+
+#if defined(CONFIG_SMP) && !defined(CONFIG_PPC_MERGE)
+extern atomic_t ipi_recv;
+extern atomic_t ipi_sent;
+#endif
+#endif /* CONFIG_PPC32 */
+
+#ifdef CONFIG_PPC64
+EXPORT_SYMBOL(irq_desc);
+
+int distribute_irqs = 1;
+int __irq_offset_value;
+u64 ppc64_interrupt_controller;
+#endif /* CONFIG_PPC64 */
+
+int show_interrupts(struct seq_file *p, void *v)
+{
+	int i = *(loff_t *)v, j;
+	struct irqaction *action;
+	irq_desc_t *desc;
+	unsigned long flags;
+
+	if (i == 0) {
+		seq_puts(p, "           ");
+		for_each_online_cpu(j)
+			seq_printf(p, "CPU%d       ", j);
+		seq_putc(p, '\n');
+	}
+
+	if (i < NR_IRQS) {
+		desc = get_irq_desc(i);
+		spin_lock_irqsave(&desc->lock, flags);
+		action = desc->action;
+		if (!action || !action->handler)
+			goto skip;
+		seq_printf(p, "%3d: ", i);
+#ifdef CONFIG_SMP
+		for_each_online_cpu(j)
+			seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
+#else
+		seq_printf(p, "%10u ", kstat_irqs(i));
+#endif /* CONFIG_SMP */
+		if (desc->handler)
+			seq_printf(p, " %s ", desc->handler->typename);
+		else
+			seq_puts(p, "  None      ");
+		seq_printf(p, "%s", (desc->status & IRQ_LEVEL) ? "Level " : "Edge  ");
+		seq_printf(p, "    %s", action->name);
+		for (action = action->next; action; action = action->next)
+			seq_printf(p, ", %s", action->name);
+		seq_putc(p, '\n');
+skip:
+		spin_unlock_irqrestore(&desc->lock, flags);
+	} else if (i == NR_IRQS) {
+#ifdef CONFIG_PPC32
+#ifdef CONFIG_TAU_INT
+		if (tau_initialized){
+			seq_puts(p, "TAU: ");
+			for (j = 0; j < NR_CPUS; j++)
+				if (cpu_online(j))
+					seq_printf(p, "%10u ", tau_interrupts(j));
+			seq_puts(p, "  PowerPC             Thermal Assist (cpu temp)\n");
+		}
+#endif
+#if defined(CONFIG_SMP) && !defined(CONFIG_PPC_MERGE)
+		/* should this be per processor send/receive? */
+		seq_printf(p, "IPI (recv/sent): %10u/%u\n",
+				atomic_read(&ipi_recv), atomic_read(&ipi_sent));
+#endif
+#endif /* CONFIG_PPC32 */
+		seq_printf(p, "BAD: %10u\n", ppc_spurious_interrupts);
+	}
+	return 0;
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+void fixup_irqs(cpumask_t map)
+{
+	unsigned int irq;
+	static int warned;
+
+	for_each_irq(irq) {
+		cpumask_t mask;
+
+		if (irq_desc[irq].status & IRQ_PER_CPU)
+			continue;
+
+		cpus_and(mask, irq_affinity[irq], map);
+		if (any_online_cpu(mask) == NR_CPUS) {
+			printk("Breaking affinity for irq %i\n", irq);
+			mask = map;
+		}
+		if (irq_desc[irq].handler->set_affinity)
+			irq_desc[irq].handler->set_affinity(irq, mask);
+		else if (irq_desc[irq].action && !(warned++))
+			printk("Cannot set affinity for irq %i\n", irq);
+	}
+
+	local_irq_enable();
+	mdelay(1);
+	local_irq_disable();
+}
+#endif
+
+#ifdef CONFIG_PPC_ISERIES
+void do_IRQ(struct pt_regs *regs)
+{
+	struct paca_struct *lpaca;
+
+	irq_enter();
+
+#ifdef CONFIG_DEBUG_STACKOVERFLOW
+	/* Debugging check for stack overflow: is there less than 2KB free? */
+	{
+		long sp;
+
+		sp = __get_SP() & (THREAD_SIZE-1);
+
+		if (unlikely(sp < (sizeof(struct thread_info) + 2048))) {
+			printk("do_IRQ: stack overflow: %ld\n",
+				sp - sizeof(struct thread_info));
+			dump_stack();
+		}
+	}
+#endif
+
+	lpaca = get_paca();
+#ifdef CONFIG_SMP
+	if (lpaca->lppaca.int_dword.fields.ipi_cnt) {
+		lpaca->lppaca.int_dword.fields.ipi_cnt = 0;
+		iSeries_smp_message_recv(regs);
+	}
+#endif /* CONFIG_SMP */
+	if (hvlpevent_is_pending())
+		process_hvlpevents(regs);
+
+	irq_exit();
+
+	if (lpaca->lppaca.int_dword.fields.decr_int) {
+		lpaca->lppaca.int_dword.fields.decr_int = 0;
+		/* Signal a fake decrementer interrupt */
+		timer_interrupt(regs);
+	}
+}
+
+#else	/* CONFIG_PPC_ISERIES */
+
+void do_IRQ(struct pt_regs *regs)
+{
+	int irq;
+#ifdef CONFIG_IRQSTACKS
+	struct thread_info *curtp, *irqtp;
+#endif
+
+        irq_enter();
+
+#ifdef CONFIG_DEBUG_STACKOVERFLOW
+	/* Debugging check for stack overflow: is there less than 2KB free? */
+	{
+		long sp;
+
+		sp = __get_SP() & (THREAD_SIZE-1);
+
+		if (unlikely(sp < (sizeof(struct thread_info) + 2048))) {
+			printk("do_IRQ: stack overflow: %ld\n",
+				sp - sizeof(struct thread_info));
+			dump_stack();
+		}
+	}
+#endif
+
+	/*
+	 * Every platform is required to implement ppc_md.get_irq.
+	 * This function will either return an irq number or -1 to
+	 * indicate there are no more pending.
+	 * The value -2 is for buggy hardware and means that this IRQ
+	 * has already been handled. -- Tom
+	 */
+	irq = ppc_md.get_irq(regs);
+
+	if (irq >= 0) {
+#ifdef CONFIG_IRQSTACKS
+		/* Switch to the irq stack to handle this */
+		curtp = current_thread_info();
+		irqtp = hardirq_ctx[smp_processor_id()];
+		if (curtp != irqtp) {
+			irqtp->task = curtp->task;
+			irqtp->flags = 0;
+			call___do_IRQ(irq, regs, irqtp);
+			irqtp->task = NULL;
+			if (irqtp->flags)
+				set_bits(irqtp->flags, &curtp->flags);
+		} else
+#endif
+			__do_IRQ(irq, regs);
+	} else
+#ifdef CONFIG_PPC32
+		if (irq != -2)
+#endif
+			/* That's not SMP safe ... but who cares ? */
+			ppc_spurious_interrupts++;
+        irq_exit();
+}
+
+#endif	/* CONFIG_PPC_ISERIES */
+
+void __init init_IRQ(void)
+{
+#ifdef CONFIG_PPC64
+	static int once = 0;
+
+	if (once)
+		return;
+
+	once++;
+
+#endif
+	ppc_md.init_IRQ();
+#ifdef CONFIG_PPC64
+	irq_ctx_init();
+#endif
+}
+
+#ifdef CONFIG_PPC64
+#ifndef CONFIG_PPC_ISERIES
+/*
+ * Virtual IRQ mapping code, used on systems with XICS interrupt controllers.
+ */
+
+#define UNDEFINED_IRQ 0xffffffff
+unsigned int virt_irq_to_real_map[NR_IRQS];
+
+/*
+ * Don't use virtual irqs 0, 1, 2 for devices.
+ * The pcnet32 driver considers interrupt numbers < 2 to be invalid,
+ * and 2 is the XICS IPI interrupt.
+ * We limit virtual irqs to 17 less than NR_IRQS so that when we
+ * offset them by 16 (to reserve the first 16 for ISA interrupts)
+ * we don't end up with an interrupt number >= NR_IRQS.
+ */
+#define MIN_VIRT_IRQ	3
+#define MAX_VIRT_IRQ	(NR_IRQS - NUM_ISA_INTERRUPTS - 1)
+#define NR_VIRT_IRQS	(MAX_VIRT_IRQ - MIN_VIRT_IRQ + 1)
+
+void
+virt_irq_init(void)
+{
+	int i;
+	for (i = 0; i < NR_IRQS; i++)
+		virt_irq_to_real_map[i] = UNDEFINED_IRQ;
+}
+
+/* Create a mapping for a real_irq if it doesn't already exist.
+ * Return the virtual irq as a convenience.
+ */
+int virt_irq_create_mapping(unsigned int real_irq)
+{
+	unsigned int virq, first_virq;
+	static int warned;
+
+	if (ppc64_interrupt_controller == IC_OPEN_PIC)
+		return real_irq;	/* no mapping for openpic (for now) */
+
+	if (ppc64_interrupt_controller == IC_CELL_PIC)
+		return real_irq;	/* no mapping for iic either */
+
+	/* don't map interrupts < MIN_VIRT_IRQ */
+	if (real_irq < MIN_VIRT_IRQ) {
+		virt_irq_to_real_map[real_irq] = real_irq;
+		return real_irq;
+	}
+
+	/* map to a number between MIN_VIRT_IRQ and MAX_VIRT_IRQ */
+	virq = real_irq;
+	if (virq > MAX_VIRT_IRQ)
+		virq = (virq % NR_VIRT_IRQS) + MIN_VIRT_IRQ;
+
+	/* search for this number or a free slot */
+	first_virq = virq;
+	while (virt_irq_to_real_map[virq] != UNDEFINED_IRQ) {
+		if (virt_irq_to_real_map[virq] == real_irq)
+			return virq;
+		if (++virq > MAX_VIRT_IRQ)
+			virq = MIN_VIRT_IRQ;
+		if (virq == first_virq)
+			goto nospace;	/* oops, no free slots */
+	}
+
+	virt_irq_to_real_map[virq] = real_irq;
+	return virq;
+
+ nospace:
+	if (!warned) {
+		printk(KERN_CRIT "Interrupt table is full\n");
+		printk(KERN_CRIT "Increase NR_IRQS (currently %d) "
+		       "in your kernel sources and rebuild.\n", NR_IRQS);
+		warned = 1;
+	}
+	return NO_IRQ;
+}
+
+/*
+ * In most cases will get a hit on the very first slot checked in the
+ * virt_irq_to_real_map.  Only when there are a large number of
+ * IRQs will this be expensive.
+ */
+unsigned int real_irq_to_virt_slowpath(unsigned int real_irq)
+{
+	unsigned int virq;
+	unsigned int first_virq;
+
+	virq = real_irq;
+
+	if (virq > MAX_VIRT_IRQ)
+		virq = (virq % NR_VIRT_IRQS) + MIN_VIRT_IRQ;
+
+	first_virq = virq;
+
+	do {
+		if (virt_irq_to_real_map[virq] == real_irq)
+			return virq;
+
+		virq++;
+
+		if (virq >= MAX_VIRT_IRQ)
+			virq = 0;
+
+	} while (first_virq != virq);
+
+	return NO_IRQ;
+
+}
+
+#endif /* CONFIG_PPC_ISERIES */
+
+#ifdef CONFIG_IRQSTACKS
+struct thread_info *softirq_ctx[NR_CPUS];
+struct thread_info *hardirq_ctx[NR_CPUS];
+
+void irq_ctx_init(void)
+{
+	struct thread_info *tp;
+	int i;
+
+	for_each_cpu(i) {
+		memset((void *)softirq_ctx[i], 0, THREAD_SIZE);
+		tp = softirq_ctx[i];
+		tp->cpu = i;
+		tp->preempt_count = SOFTIRQ_OFFSET;
+
+		memset((void *)hardirq_ctx[i], 0, THREAD_SIZE);
+		tp = hardirq_ctx[i];
+		tp->cpu = i;
+		tp->preempt_count = HARDIRQ_OFFSET;
+	}
+}
+
+void do_softirq(void)
+{
+	unsigned long flags;
+	struct thread_info *curtp, *irqtp;
+
+	if (in_interrupt())
+		return;
+
+	local_irq_save(flags);
+
+	if (local_softirq_pending()) {
+		curtp = current_thread_info();
+		irqtp = softirq_ctx[smp_processor_id()];
+		irqtp->task = curtp->task;
+		call_do_softirq(irqtp);
+		irqtp->task = NULL;
+	}
+
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL(do_softirq);
+
+#endif /* CONFIG_IRQSTACKS */
+
+static int __init setup_noirqdistrib(char *str)
+{
+	distribute_irqs = 0;
+	return 1;
+}
+
+__setup("noirqdistrib", setup_noirqdistrib);
+#endif /* CONFIG_PPC64 */
diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c
index 83a49e8..90040c4 100644
--- a/arch/powerpc/platforms/powermac/pic.c
+++ b/arch/powerpc/platforms/powermac/pic.c
@@ -74,6 +74,9 @@ static DEFINE_SPINLOCK(pmac_pic_lock);
 #define GATWICK_IRQ_POOL_SIZE        10
 static struct interrupt_info gatwick_int_pool[GATWICK_IRQ_POOL_SIZE];
 
+#define NR_MASK_WORDS	((NR_IRQS + 31) / 32)
+static unsigned long ppc_lost_interrupts[NR_MASK_WORDS];
+
 /*
  * Mark an irq as "lost".  This is only used on the pmac
  * since it can lose interrupts (see pmac_set_irq_mask).
-- 
cgit v1.1


From c5ff700116a56a870ef40cc4ac6f19bf2530b466 Mon Sep 17 00:00:00 2001
From: David Gibson <david@gibson.dropbear.id.au>
Date: Wed, 9 Nov 2005 11:21:07 +1100
Subject: [PATCH] powerpc: Merge signal.h

Having already merged the ppc and ppc64 versions of signal.c, this
patch finishes the job by merging signal.h.  The two versions were
almost identical already.  Notable changes:
	- We use BITS_PER_LONG to correctly size sigset_t
	- Remove some uneeded #includes and struct forward
declarations.  This does mean adding an include to signal_32.c which
relied on the indirect inclusion of sigcontext.h
	- As the ppc64 version, the merged signal.h has prototypes for
do_signal() and do_signal32().  Thus remove extra prototypes from
ppc_ksyms.c which had them directly.

Built and booted on POWER5 LPAR (ARCH=ppc64 and ARCH=powerpc).  Built
for 32-bit powermac (ARCH=ppc and ARCH=powerpc) and Walnut (ARCH=ppc).

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/kernel/ppc_ksyms.c | 2 +-
 arch/powerpc/kernel/signal_32.c | 1 +
 2 files changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c
index 47d6f7e..5d9fd03 100644
--- a/arch/powerpc/kernel/ppc_ksyms.c
+++ b/arch/powerpc/kernel/ppc_ksyms.c
@@ -44,6 +44,7 @@
 #include <asm/cputable.h>
 #include <asm/btext.h>
 #include <asm/div64.h>
+#include <asm/signal.h>
 
 #ifdef  CONFIG_8xx
 #include <asm/commproc.h>
@@ -56,7 +57,6 @@ extern void machine_check_exception(struct pt_regs *regs);
 extern void alignment_exception(struct pt_regs *regs);
 extern void program_check_exception(struct pt_regs *regs);
 extern void single_step_exception(struct pt_regs *regs);
-extern int do_signal(sigset_t *, struct pt_regs *);
 extern int pmac_newworld;
 extern int sys_sigreturn(struct pt_regs *regs);
 
diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c
index 081d931..a7c4515 100644
--- a/arch/powerpc/kernel/signal_32.c
+++ b/arch/powerpc/kernel/signal_32.c
@@ -42,6 +42,7 @@
 
 #include <asm/uaccess.h>
 #include <asm/cacheflush.h>
+#include <asm/sigcontext.h>
 #ifdef CONFIG_PPC64
 #include "ppc32.h"
 #include <asm/unistd.h>
-- 
cgit v1.1


From 8882a4da1c932c9f311c9f739e6719adea3e25d9 Mon Sep 17 00:00:00 2001
From: David Gibson <david@gibson.dropbear.id.au>
Date: Wed, 9 Nov 2005 13:38:01 +1100
Subject: [PATCH] powerpc: Move various ppc64 files with no ppc32 equivalent to
 powerpc

This patch moves a bunch of files from arch/ppc64 and
include/asm-ppc64 which have no equivalents in ppc32 code into
arch/powerpc and include/asm-powerpc.  The file affected are:
	abs_addr.h
	compat.h
	lppaca.h
	paca.h
	tce.h
	cpu_setup_power4.S
	ioctl32.c
	firmware.c
	pacaData.c

The only changes apart from the move and corresponding Makefile
changes are:
	- #ifndef/#define in includes updated to _ASM_POWERPC_ form
	- trailing whitespace removed
	- comments giving full paths removed
	- pacaData.c renamed paca.c to remove studlyCaps
	- Misplaced { moved in lppaca.h

Built and booted on POWER5 LPAR (ARCH=powerpc and ARCH=ppc64), built
for 32-bit powermac (ARCH=powerpc).

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/kernel/Makefile           |   5 +-
 arch/powerpc/kernel/cpu_setup_power4.S | 233 +++++++++++++++++++++++++++++++++
 arch/powerpc/kernel/firmware.c         |  45 +++++++
 arch/powerpc/kernel/ioctl32.c          |  49 +++++++
 arch/powerpc/kernel/paca.c             | 143 ++++++++++++++++++++
 5 files changed, 474 insertions(+), 1 deletion(-)
 create mode 100644 arch/powerpc/kernel/cpu_setup_power4.S
 create mode 100644 arch/powerpc/kernel/firmware.c
 create mode 100644 arch/powerpc/kernel/ioctl32.c
 create mode 100644 arch/powerpc/kernel/paca.c

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index b3ae299..103cb81 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -4,6 +4,7 @@
 
 ifeq ($(CONFIG_PPC64),y)
 EXTRA_CFLAGS	+= -mno-minimal-toc
+CFLAGS_ioctl32.o += -Ifs/
 endif
 ifeq ($(CONFIG_PPC32),y)
 CFLAGS_prom_init.o      += -fPIC
@@ -13,7 +14,9 @@ endif
 obj-y				:= semaphore.o cputable.o ptrace.o syscalls.o \
 				   signal_32.o pmc.o
 obj-$(CONFIG_PPC64)		+= setup_64.o binfmt_elf32.o sys_ppc32.o \
-				   signal_64.o ptrace32.o systbl.o
+				   signal_64.o ptrace32.o systbl.o \
+				   paca.o ioctl32.o cpu_setup_power4.o \
+				   firmware.o
 obj-$(CONFIG_ALTIVEC)		+= vecemu.o vector.o
 obj-$(CONFIG_POWER4)		+= idle_power4.o
 obj-$(CONFIG_PPC_OF)		+= of_device.o
diff --git a/arch/powerpc/kernel/cpu_setup_power4.S b/arch/powerpc/kernel/cpu_setup_power4.S
new file mode 100644
index 0000000..cca942f
--- /dev/null
+++ b/arch/powerpc/kernel/cpu_setup_power4.S
@@ -0,0 +1,233 @@
+/*
+ * This file contains low level CPU setup functions.
+ *    Copyright (C) 2003 Benjamin Herrenschmidt (benh@kernel.crashing.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/cputable.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/cache.h>
+
+_GLOBAL(__970_cpu_preinit)
+	/*
+	 * Do nothing if not running in HV mode
+	 */
+	mfmsr	r0
+	rldicl.	r0,r0,4,63
+	beqlr
+
+	/*
+	 * Deal only with PPC970 and PPC970FX.
+	 */
+	mfspr	r0,SPRN_PVR
+	srwi	r0,r0,16
+	cmpwi	r0,0x39
+	beq	1f
+	cmpwi	r0,0x3c
+	beq	1f
+	cmpwi	r0,0x44
+	bnelr
+1:
+
+	/* Make sure HID4:rm_ci is off before MMU is turned off, that large
+	 * pages are enabled with HID4:61 and clear HID5:DCBZ_size and
+	 * HID5:DCBZ32_ill
+	 */
+	li	r0,0
+	mfspr	r3,SPRN_HID4
+	rldimi	r3,r0,40,23	/* clear bit 23 (rm_ci) */
+	rldimi	r3,r0,2,61	/* clear bit 61 (lg_pg_en) */
+	sync
+	mtspr	SPRN_HID4,r3
+	isync
+	sync
+	mfspr	r3,SPRN_HID5
+	rldimi	r3,r0,6,56	/* clear bits 56 & 57 (DCBZ*) */
+	sync
+	mtspr	SPRN_HID5,r3
+	isync
+	sync
+
+	/* Setup some basic HID1 features */
+	mfspr	r0,SPRN_HID1
+	li	r3,0x1200		/* enable i-fetch cacheability */
+	sldi	r3,r3,44		/* and prefetch */
+	or	r0,r0,r3
+	mtspr	SPRN_HID1,r0
+	mtspr	SPRN_HID1,r0
+	isync
+
+	/* Clear HIOR */
+	li	r0,0
+	sync
+	mtspr	SPRN_HIOR,0		/* Clear interrupt prefix */
+	isync
+	blr
+
+_GLOBAL(__setup_cpu_power4)
+	blr
+
+_GLOBAL(__setup_cpu_be)
+        /* Set large page sizes LP=0: 16MB, LP=1: 64KB */
+        addi    r3, 0,  0
+        ori     r3, r3, HID6_LB
+        sldi    r3, r3, 32
+        nor     r3, r3, r3
+        mfspr   r4, SPRN_HID6
+        and     r4, r4, r3
+        addi    r3, 0, 0x02000
+        sldi    r3, r3, 32
+        or      r4, r4, r3
+        mtspr   SPRN_HID6, r4
+	blr
+
+_GLOBAL(__setup_cpu_ppc970)
+	mfspr	r0,SPRN_HID0
+	li	r11,5			/* clear DOZE and SLEEP */
+	rldimi	r0,r11,52,8		/* set NAP and DPM */
+	mtspr	SPRN_HID0,r0
+	mfspr	r0,SPRN_HID0
+	mfspr	r0,SPRN_HID0
+	mfspr	r0,SPRN_HID0
+	mfspr	r0,SPRN_HID0
+	mfspr	r0,SPRN_HID0
+	mfspr	r0,SPRN_HID0
+	sync
+	isync
+	blr
+
+/* Definitions for the table use to save CPU states */
+#define CS_HID0		0
+#define CS_HID1		8
+#define	CS_HID4		16
+#define CS_HID5		24
+#define CS_SIZE		32
+
+	.data
+	.balign	L1_CACHE_BYTES,0
+cpu_state_storage:
+	.space	CS_SIZE
+	.balign	L1_CACHE_BYTES,0
+	.text
+
+/* Called in normal context to backup CPU 0 state. This
+ * does not include cache settings. This function is also
+ * called for machine sleep. This does not include the MMU
+ * setup, BATs, etc... but rather the "special" registers
+ * like HID0, HID1, HID4, etc...
+ */
+_GLOBAL(__save_cpu_setup)
+	/* Some CR fields are volatile, we back it up all */
+	mfcr	r7
+
+	/* Get storage ptr */
+	LOADADDR(r5,cpu_state_storage)
+
+	/* We only deal with 970 for now */
+	mfspr	r0,SPRN_PVR
+	srwi	r0,r0,16
+	cmpwi	r0,0x39
+	beq	1f
+	cmpwi	r0,0x3c
+	beq	1f
+	cmpwi	r0,0x44
+	bne	2f
+
+1:	/* Save HID0,1,4 and 5 */
+	mfspr	r3,SPRN_HID0
+	std	r3,CS_HID0(r5)
+	mfspr	r3,SPRN_HID1
+	std	r3,CS_HID1(r5)
+	mfspr	r3,SPRN_HID4
+	std	r3,CS_HID4(r5)
+	mfspr	r3,SPRN_HID5
+	std	r3,CS_HID5(r5)
+
+2:
+	mtcr	r7
+	blr
+
+/* Called with no MMU context (typically MSR:IR/DR off) to
+ * restore CPU state as backed up by the previous
+ * function. This does not include cache setting
+ */
+_GLOBAL(__restore_cpu_setup)
+	/* Get storage ptr (FIXME when using anton reloc as we
+	 * are running with translation disabled here
+	 */
+	LOADADDR(r5,cpu_state_storage)
+
+	/* We only deal with 970 for now */
+	mfspr	r0,SPRN_PVR
+	srwi	r0,r0,16
+	cmpwi	r0,0x39
+	beq	1f
+	cmpwi	r0,0x3c
+	beq	1f
+	cmpwi	r0,0x44
+	bnelr
+
+1:	/* Before accessing memory, we make sure rm_ci is clear */
+	li	r0,0
+	mfspr	r3,SPRN_HID4
+	rldimi	r3,r0,40,23	/* clear bit 23 (rm_ci) */
+	sync
+	mtspr	SPRN_HID4,r3
+	isync
+	sync
+
+	/* Clear interrupt prefix */
+	li	r0,0
+	sync
+	mtspr	SPRN_HIOR,0
+	isync
+
+	/* Restore HID0 */
+	ld	r3,CS_HID0(r5)
+	sync
+	isync
+	mtspr	SPRN_HID0,r3
+	mfspr	r3,SPRN_HID0
+	mfspr	r3,SPRN_HID0
+	mfspr	r3,SPRN_HID0
+	mfspr	r3,SPRN_HID0
+	mfspr	r3,SPRN_HID0
+	mfspr	r3,SPRN_HID0
+	sync
+	isync
+
+	/* Restore HID1 */
+	ld	r3,CS_HID1(r5)
+	sync
+	isync
+	mtspr	SPRN_HID1,r3
+	mtspr	SPRN_HID1,r3
+	sync
+	isync
+
+	/* Restore HID4 */
+	ld	r3,CS_HID4(r5)
+	sync
+	isync
+	mtspr	SPRN_HID4,r3
+	sync
+	isync
+
+	/* Restore HID5 */
+	ld	r3,CS_HID5(r5)
+	sync
+	isync
+	mtspr	SPRN_HID5,r3
+	sync
+	isync
+	blr
+
diff --git a/arch/powerpc/kernel/firmware.c b/arch/powerpc/kernel/firmware.c
new file mode 100644
index 0000000..65eae75
--- /dev/null
+++ b/arch/powerpc/kernel/firmware.c
@@ -0,0 +1,45 @@
+/*
+ *  Extracted from cputable.c
+ *
+ *  Copyright (C) 2001 Ben. Herrenschmidt (benh@kernel.crashing.org)
+ *
+ *  Modifications for ppc64:
+ *      Copyright (C) 2003 Dave Engebretsen <engebret@us.ibm.com>
+ *  Copyright (C) 2005 Stephen Rothwell, IBM Corporation
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/config.h>
+
+#include <asm/firmware.h>
+
+unsigned long ppc64_firmware_features;
+
+#ifdef CONFIG_PPC_PSERIES
+firmware_feature_t firmware_features_table[FIRMWARE_MAX_FEATURES] = {
+	{FW_FEATURE_PFT,		"hcall-pft"},
+	{FW_FEATURE_TCE,		"hcall-tce"},
+	{FW_FEATURE_SPRG0,		"hcall-sprg0"},
+	{FW_FEATURE_DABR,		"hcall-dabr"},
+	{FW_FEATURE_COPY,		"hcall-copy"},
+	{FW_FEATURE_ASR,		"hcall-asr"},
+	{FW_FEATURE_DEBUG,		"hcall-debug"},
+	{FW_FEATURE_PERF,		"hcall-perf"},
+	{FW_FEATURE_DUMP,		"hcall-dump"},
+	{FW_FEATURE_INTERRUPT,		"hcall-interrupt"},
+	{FW_FEATURE_MIGRATE,		"hcall-migrate"},
+	{FW_FEATURE_PERFMON,		"hcall-perfmon"},
+	{FW_FEATURE_CRQ,		"hcall-crq"},
+	{FW_FEATURE_VIO,		"hcall-vio"},
+	{FW_FEATURE_RDMA,		"hcall-rdma"},
+	{FW_FEATURE_LLAN,		"hcall-lLAN"},
+	{FW_FEATURE_BULK,		"hcall-bulk"},
+	{FW_FEATURE_XDABR,		"hcall-xdabr"},
+	{FW_FEATURE_MULTITCE,		"hcall-multi-tce"},
+	{FW_FEATURE_SPLPAR,		"hcall-splpar"},
+};
+#endif
diff --git a/arch/powerpc/kernel/ioctl32.c b/arch/powerpc/kernel/ioctl32.c
new file mode 100644
index 0000000..3fa6a93
--- /dev/null
+++ b/arch/powerpc/kernel/ioctl32.c
@@ -0,0 +1,49 @@
+/*
+ * ioctl32.c: Conversion between 32bit and 64bit native ioctls.
+ *
+ * Based on sparc64 ioctl32.c by:
+ *
+ * Copyright (C) 1997-2000  Jakub Jelinek  (jakub@redhat.com)
+ * Copyright (C) 1998  Eddie C. Dost  (ecd@skynet.be)
+ *
+ * ppc64 changes:
+ *
+ * Copyright (C) 2000  Ken Aaker (kdaaker@rchland.vnet.ibm.com)
+ * Copyright (C) 2001  Anton Blanchard (antonb@au.ibm.com)
+ *
+ * These routines maintain argument size conversion between 32bit and 64bit
+ * ioctls.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#define INCLUDES
+#include "compat_ioctl.c"
+#include <linux/syscalls.h>
+
+#define CODE
+#include "compat_ioctl.c"
+
+#define HANDLE_IOCTL(cmd,handler) { cmd, (ioctl_trans_handler_t)handler, NULL },
+#define COMPATIBLE_IOCTL(cmd) HANDLE_IOCTL(cmd,sys_ioctl)
+
+#define IOCTL_TABLE_START \
+	struct ioctl_trans ioctl_start[] = {
+#define IOCTL_TABLE_END \
+	};
+
+IOCTL_TABLE_START
+#include <linux/compat_ioctl.h>
+#define DECLARES
+#include "compat_ioctl.c"
+
+/* Little p (/dev/rtc, /dev/envctrl, etc.) */
+COMPATIBLE_IOCTL(_IOR('p', 20, int[7])) /* RTCGET */
+COMPATIBLE_IOCTL(_IOW('p', 21, int[7])) /* RTCSET */
+
+IOCTL_TABLE_END
+
+int ioctl_table_size = ARRAY_SIZE(ioctl_start);
diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c
new file mode 100644
index 0000000..179948e
--- /dev/null
+++ b/arch/powerpc/kernel/paca.c
@@ -0,0 +1,143 @@
+/*
+ * c 2001 PPC 64 Team, IBM Corp
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/threads.h>
+#include <linux/module.h>
+
+#include <asm/processor.h>
+#include <asm/ptrace.h>
+#include <asm/page.h>
+
+#include <asm/lppaca.h>
+#include <asm/iseries/it_lp_queue.h>
+#include <asm/paca.h>
+
+static union {
+	struct systemcfg	data;
+	u8			page[PAGE_SIZE];
+} systemcfg_store __attribute__((__section__(".data.page.aligned")));
+struct systemcfg *systemcfg = &systemcfg_store.data;
+EXPORT_SYMBOL(systemcfg);
+
+
+/* This symbol is provided by the linker - let it fill in the paca
+ * field correctly */
+extern unsigned long __toc_start;
+
+/* The Paca is an array with one entry per processor.  Each contains an
+ * lppaca, which contains the information shared between the
+ * hypervisor and Linux.  Each also contains an ItLpRegSave area which
+ * is used by the hypervisor to save registers.
+ * On systems with hardware multi-threading, there are two threads
+ * per processor.  The Paca array must contain an entry for each thread.
+ * The VPD Areas will give a max logical processors = 2 * max physical
+ * processors.  The processor VPD array needs one entry per physical
+ * processor (not thread).
+ */
+#define PACA_INIT_COMMON(number, start, asrr, asrv)			    \
+	.lock_token = 0x8000,						    \
+	.paca_index = (number),		/* Paca Index */		    \
+	.default_decr = 0x00ff0000,	/* Initial Decr */		    \
+	.kernel_toc = (unsigned long)(&__toc_start) + 0x8000UL,		    \
+	.stab_real = (asrr), 		/* Real pointer to segment table */ \
+	.stab_addr = (asrv),		/* Virt pointer to segment table */ \
+	.cpu_start = (start),		/* Processor start */		    \
+	.hw_cpu_id = 0xffff,						    \
+	.lppaca = {							    \
+		.desc = 0xd397d781,	/* "LpPa" */			    \
+		.size = sizeof(struct lppaca),				    \
+		.dyn_proc_status = 2,					    \
+		.decr_val = 0x00ff0000,					    \
+		.fpregs_in_use = 1,					    \
+		.end_of_quantum = 0xfffffffffffffffful,			    \
+		.slb_count = 64,					    \
+		.vmxregs_in_use = 0,					    \
+	},								    \
+
+#ifdef CONFIG_PPC_ISERIES
+#define PACA_INIT_ISERIES(number)					    \
+	.lppaca_ptr = &paca[number].lppaca,				    \
+	.reg_save_ptr = &paca[number].reg_save,				    \
+	.reg_save = {							    \
+		.xDesc = 0xd397d9e2,	/* "LpRS" */			    \
+		.xSize = sizeof(struct ItLpRegSave)			    \
+	}
+
+#define PACA_INIT(number)						    \
+{									    \
+	PACA_INIT_COMMON(number, 0, 0, 0)				    \
+	PACA_INIT_ISERIES(number)					    \
+}
+
+#define BOOTCPU_PACA_INIT(number)					    \
+{									    \
+	PACA_INIT_COMMON(number, 1, 0, (u64)&initial_stab)		    \
+	PACA_INIT_ISERIES(number)					    \
+}
+
+#else
+#define PACA_INIT(number)						    \
+{									    \
+	PACA_INIT_COMMON(number, 0, 0, 0)				    \
+}
+
+#define BOOTCPU_PACA_INIT(number)					    \
+{									    \
+	PACA_INIT_COMMON(number, 1, STAB0_PHYS_ADDR, (u64)&initial_stab)    \
+}
+#endif
+
+struct paca_struct paca[] = {
+	BOOTCPU_PACA_INIT(0),
+#if NR_CPUS > 1
+	PACA_INIT(  1), PACA_INIT(  2), PACA_INIT(  3),
+#if NR_CPUS > 4
+	PACA_INIT(  4), PACA_INIT(  5), PACA_INIT(  6), PACA_INIT(  7),
+#if NR_CPUS > 8
+	PACA_INIT(  8), PACA_INIT(  9), PACA_INIT( 10), PACA_INIT( 11),
+	PACA_INIT( 12), PACA_INIT( 13), PACA_INIT( 14), PACA_INIT( 15),
+	PACA_INIT( 16), PACA_INIT( 17), PACA_INIT( 18), PACA_INIT( 19),
+	PACA_INIT( 20), PACA_INIT( 21), PACA_INIT( 22), PACA_INIT( 23),
+	PACA_INIT( 24), PACA_INIT( 25), PACA_INIT( 26), PACA_INIT( 27),
+	PACA_INIT( 28), PACA_INIT( 29), PACA_INIT( 30), PACA_INIT( 31),
+#if NR_CPUS > 32
+	PACA_INIT( 32), PACA_INIT( 33), PACA_INIT( 34), PACA_INIT( 35),
+	PACA_INIT( 36), PACA_INIT( 37), PACA_INIT( 38), PACA_INIT( 39),
+	PACA_INIT( 40), PACA_INIT( 41), PACA_INIT( 42), PACA_INIT( 43),
+	PACA_INIT( 44), PACA_INIT( 45), PACA_INIT( 46), PACA_INIT( 47),
+	PACA_INIT( 48), PACA_INIT( 49), PACA_INIT( 50), PACA_INIT( 51),
+	PACA_INIT( 52), PACA_INIT( 53), PACA_INIT( 54), PACA_INIT( 55),
+	PACA_INIT( 56), PACA_INIT( 57), PACA_INIT( 58), PACA_INIT( 59),
+	PACA_INIT( 60), PACA_INIT( 61), PACA_INIT( 62), PACA_INIT( 63),
+#if NR_CPUS > 64
+	PACA_INIT( 64), PACA_INIT( 65), PACA_INIT( 66), PACA_INIT( 67),
+	PACA_INIT( 68), PACA_INIT( 69), PACA_INIT( 70), PACA_INIT( 71),
+	PACA_INIT( 72), PACA_INIT( 73), PACA_INIT( 74), PACA_INIT( 75),
+	PACA_INIT( 76), PACA_INIT( 77), PACA_INIT( 78), PACA_INIT( 79),
+	PACA_INIT( 80), PACA_INIT( 81), PACA_INIT( 82), PACA_INIT( 83),
+	PACA_INIT( 84), PACA_INIT( 85), PACA_INIT( 86), PACA_INIT( 87),
+	PACA_INIT( 88), PACA_INIT( 89), PACA_INIT( 90), PACA_INIT( 91),
+	PACA_INIT( 92), PACA_INIT( 93), PACA_INIT( 94), PACA_INIT( 95),
+	PACA_INIT( 96), PACA_INIT( 97), PACA_INIT( 98), PACA_INIT( 99),
+	PACA_INIT(100), PACA_INIT(101), PACA_INIT(102), PACA_INIT(103),
+	PACA_INIT(104), PACA_INIT(105), PACA_INIT(106), PACA_INIT(107),
+	PACA_INIT(108), PACA_INIT(109), PACA_INIT(110), PACA_INIT(111),
+	PACA_INIT(112), PACA_INIT(113), PACA_INIT(114), PACA_INIT(115),
+	PACA_INIT(116), PACA_INIT(117), PACA_INIT(118), PACA_INIT(119),
+	PACA_INIT(120), PACA_INIT(121), PACA_INIT(122), PACA_INIT(123),
+	PACA_INIT(124), PACA_INIT(125), PACA_INIT(126), PACA_INIT(127),
+#endif
+#endif
+#endif
+#endif
+#endif
+};
+EXPORT_SYMBOL(paca);
-- 
cgit v1.1


From 77ac166fba909d520b9a21dcc28cb49081e31033 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Thu, 10 Nov 2005 11:12:11 +1100
Subject: [PATCH] ppc64: Don't panic when early __ioremap fails

Early calls to __ioremap() will panic if the hash insertion fails. This
patch makes them return NULL instead. It happens with some pSeries users
who enabled CONFIG_BOOTX_TEXT. The later is getting an incorrect address
for the fame buffer and the hash insertion fails. With this patch, it
will display an error instead of crashing at boot.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/mm/pgtable_64.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c
index 9008424..c7f7bb6 100644
--- a/arch/powerpc/mm/pgtable_64.c
+++ b/arch/powerpc/mm/pgtable_64.c
@@ -122,8 +122,11 @@ static int map_io_page(unsigned long ea, unsigned long pa, int flags)
 		 *
 		 */
 		if (htab_bolt_mapping(ea, ea + PAGE_SIZE, pa, flags,
-				      mmu_virtual_psize))
-			panic("Can't map bolted IO mapping");
+				      mmu_virtual_psize)) {
+			printk(KERN_ERR "Failed to do bolted mapping IO "
+			       "memory at %016lx !\n", pa);
+			return -ENOMEM;
+		}
 	}
 	return 0;
 }
-- 
cgit v1.1


From 7f79da7accd63a6adb84f4602f66779f6a701e7b Mon Sep 17 00:00:00 2001
From: Linas Vepstas <linas@linas.org>
Date: Thu, 3 Nov 2005 18:49:51 -0600
Subject: [PATCH] ppc64: move eeh.c to powerpc directory from ppc64

11-eeh-move-to-powerpc.patch

Move arch/ppc64/kernel/eeh.c to arch//powerpc/platforms/pseries/eeh.c
No other changes (except for Makefile to build it)

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/platforms/pseries/Makefile |    1 +
 arch/powerpc/platforms/pseries/eeh.c    | 1093 +++++++++++++++++++++++++++++++
 2 files changed, 1094 insertions(+)
 create mode 100644 arch/powerpc/platforms/pseries/eeh.c

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile
index b9938fe..dbdffb2 100644
--- a/arch/powerpc/platforms/pseries/Makefile
+++ b/arch/powerpc/platforms/pseries/Makefile
@@ -3,3 +3,4 @@ obj-y			:= pci.o lpar.o hvCall.o nvram.o reconfig.o \
 obj-$(CONFIG_SMP)	+= smp.o
 obj-$(CONFIG_IBMVIO)	+= vio.o
 obj-$(CONFIG_XICS)	+= xics.o
+obj-$(CONFIG_EEH)    += eeh.o
diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
new file mode 100644
index 0000000..9df1d50
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -0,0 +1,1093 @@
+/*
+ * eeh.c
+ * Copyright (C) 2001 Dave Engebretsen & Todd Inglett IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/notifier.h>
+#include <linux/pci.h>
+#include <linux/proc_fs.h>
+#include <linux/rbtree.h>
+#include <linux/seq_file.h>
+#include <linux/spinlock.h>
+#include <asm/atomic.h>
+#include <asm/eeh.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/rtas.h>
+#include <asm/atomic.h>
+#include <asm/systemcfg.h>
+#include <asm/ppc-pci.h>
+
+#undef DEBUG
+
+/** Overview:
+ *  EEH, or "Extended Error Handling" is a PCI bridge technology for
+ *  dealing with PCI bus errors that can't be dealt with within the
+ *  usual PCI framework, except by check-stopping the CPU.  Systems
+ *  that are designed for high-availability/reliability cannot afford
+ *  to crash due to a "mere" PCI error, thus the need for EEH.
+ *  An EEH-capable bridge operates by converting a detected error
+ *  into a "slot freeze", taking the PCI adapter off-line, making
+ *  the slot behave, from the OS'es point of view, as if the slot
+ *  were "empty": all reads return 0xff's and all writes are silently
+ *  ignored.  EEH slot isolation events can be triggered by parity
+ *  errors on the address or data busses (e.g. during posted writes),
+ *  which in turn might be caused by low voltage on the bus, dust,
+ *  vibration, humidity, radioactivity or plain-old failed hardware.
+ *
+ *  Note, however, that one of the leading causes of EEH slot
+ *  freeze events are buggy device drivers, buggy device microcode,
+ *  or buggy device hardware.  This is because any attempt by the
+ *  device to bus-master data to a memory address that is not
+ *  assigned to the device will trigger a slot freeze.   (The idea
+ *  is to prevent devices-gone-wild from corrupting system memory).
+ *  Buggy hardware/drivers will have a miserable time co-existing
+ *  with EEH.
+ *
+ *  Ideally, a PCI device driver, when suspecting that an isolation
+ *  event has occured (e.g. by reading 0xff's), will then ask EEH
+ *  whether this is the case, and then take appropriate steps to
+ *  reset the PCI slot, the PCI device, and then resume operations.
+ *  However, until that day,  the checking is done here, with the
+ *  eeh_check_failure() routine embedded in the MMIO macros.  If
+ *  the slot is found to be isolated, an "EEH Event" is synthesized
+ *  and sent out for processing.
+ */
+
+/* EEH event workqueue setup. */
+static DEFINE_SPINLOCK(eeh_eventlist_lock);
+LIST_HEAD(eeh_eventlist);
+static void eeh_event_handler(void *);
+DECLARE_WORK(eeh_event_wq, eeh_event_handler, NULL);
+
+static struct notifier_block *eeh_notifier_chain;
+
+/* If a device driver keeps reading an MMIO register in an interrupt
+ * handler after a slot isolation event has occurred, we assume it
+ * is broken and panic.  This sets the threshold for how many read
+ * attempts we allow before panicking.
+ */
+#define EEH_MAX_FAILS	100000
+
+/* RTAS tokens */
+static int ibm_set_eeh_option;
+static int ibm_set_slot_reset;
+static int ibm_read_slot_reset_state;
+static int ibm_read_slot_reset_state2;
+static int ibm_slot_error_detail;
+
+static int eeh_subsystem_enabled;
+
+/* Lock to avoid races due to multiple reports of an error */
+static DEFINE_SPINLOCK(confirm_error_lock);
+
+/* Buffer for reporting slot-error-detail rtas calls */
+static unsigned char slot_errbuf[RTAS_ERROR_LOG_MAX];
+static DEFINE_SPINLOCK(slot_errbuf_lock);
+static int eeh_error_buf_size;
+
+/* System monitoring statistics */
+static DEFINE_PER_CPU(unsigned long, no_device);
+static DEFINE_PER_CPU(unsigned long, no_dn);
+static DEFINE_PER_CPU(unsigned long, no_cfg_addr);
+static DEFINE_PER_CPU(unsigned long, ignored_check);
+static DEFINE_PER_CPU(unsigned long, total_mmio_ffs);
+static DEFINE_PER_CPU(unsigned long, false_positives);
+static DEFINE_PER_CPU(unsigned long, ignored_failures);
+static DEFINE_PER_CPU(unsigned long, slot_resets);
+
+/**
+ * The pci address cache subsystem.  This subsystem places
+ * PCI device address resources into a red-black tree, sorted
+ * according to the address range, so that given only an i/o
+ * address, the corresponding PCI device can be **quickly**
+ * found. It is safe to perform an address lookup in an interrupt
+ * context; this ability is an important feature.
+ *
+ * Currently, the only customer of this code is the EEH subsystem;
+ * thus, this code has been somewhat tailored to suit EEH better.
+ * In particular, the cache does *not* hold the addresses of devices
+ * for which EEH is not enabled.
+ *
+ * (Implementation Note: The RB tree seems to be better/faster
+ * than any hash algo I could think of for this problem, even
+ * with the penalty of slow pointer chases for d-cache misses).
+ */
+struct pci_io_addr_range
+{
+	struct rb_node rb_node;
+	unsigned long addr_lo;
+	unsigned long addr_hi;
+	struct pci_dev *pcidev;
+	unsigned int flags;
+};
+
+static struct pci_io_addr_cache
+{
+	struct rb_root rb_root;
+	spinlock_t piar_lock;
+} pci_io_addr_cache_root;
+
+static inline struct pci_dev *__pci_get_device_by_addr(unsigned long addr)
+{
+	struct rb_node *n = pci_io_addr_cache_root.rb_root.rb_node;
+
+	while (n) {
+		struct pci_io_addr_range *piar;
+		piar = rb_entry(n, struct pci_io_addr_range, rb_node);
+
+		if (addr < piar->addr_lo) {
+			n = n->rb_left;
+		} else {
+			if (addr > piar->addr_hi) {
+				n = n->rb_right;
+			} else {
+				pci_dev_get(piar->pcidev);
+				return piar->pcidev;
+			}
+		}
+	}
+
+	return NULL;
+}
+
+/**
+ * pci_get_device_by_addr - Get device, given only address
+ * @addr: mmio (PIO) phys address or i/o port number
+ *
+ * Given an mmio phys address, or a port number, find a pci device
+ * that implements this address.  Be sure to pci_dev_put the device
+ * when finished.  I/O port numbers are assumed to be offset
+ * from zero (that is, they do *not* have pci_io_addr added in).
+ * It is safe to call this function within an interrupt.
+ */
+static struct pci_dev *pci_get_device_by_addr(unsigned long addr)
+{
+	struct pci_dev *dev;
+	unsigned long flags;
+
+	spin_lock_irqsave(&pci_io_addr_cache_root.piar_lock, flags);
+	dev = __pci_get_device_by_addr(addr);
+	spin_unlock_irqrestore(&pci_io_addr_cache_root.piar_lock, flags);
+	return dev;
+}
+
+#ifdef DEBUG
+/*
+ * Handy-dandy debug print routine, does nothing more
+ * than print out the contents of our addr cache.
+ */
+static void pci_addr_cache_print(struct pci_io_addr_cache *cache)
+{
+	struct rb_node *n;
+	int cnt = 0;
+
+	n = rb_first(&cache->rb_root);
+	while (n) {
+		struct pci_io_addr_range *piar;
+		piar = rb_entry(n, struct pci_io_addr_range, rb_node);
+		printk(KERN_DEBUG "PCI: %s addr range %d [%lx-%lx]: %s\n",
+		       (piar->flags & IORESOURCE_IO) ? "i/o" : "mem", cnt,
+		       piar->addr_lo, piar->addr_hi, pci_name(piar->pcidev));
+		cnt++;
+		n = rb_next(n);
+	}
+}
+#endif
+
+/* Insert address range into the rb tree. */
+static struct pci_io_addr_range *
+pci_addr_cache_insert(struct pci_dev *dev, unsigned long alo,
+		      unsigned long ahi, unsigned int flags)
+{
+	struct rb_node **p = &pci_io_addr_cache_root.rb_root.rb_node;
+	struct rb_node *parent = NULL;
+	struct pci_io_addr_range *piar;
+
+	/* Walk tree, find a place to insert into tree */
+	while (*p) {
+		parent = *p;
+		piar = rb_entry(parent, struct pci_io_addr_range, rb_node);
+		if (ahi < piar->addr_lo) {
+			p = &parent->rb_left;
+		} else if (alo > piar->addr_hi) {
+			p = &parent->rb_right;
+		} else {
+			if (dev != piar->pcidev ||
+			    alo != piar->addr_lo || ahi != piar->addr_hi) {
+				printk(KERN_WARNING "PIAR: overlapping address range\n");
+			}
+			return piar;
+		}
+	}
+	piar = (struct pci_io_addr_range *)kmalloc(sizeof(struct pci_io_addr_range), GFP_ATOMIC);
+	if (!piar)
+		return NULL;
+
+	piar->addr_lo = alo;
+	piar->addr_hi = ahi;
+	piar->pcidev = dev;
+	piar->flags = flags;
+
+#ifdef DEBUG
+	printk(KERN_DEBUG "PIAR: insert range=[%lx:%lx] dev=%s\n",
+	                  alo, ahi, pci_name (dev));
+#endif
+
+	rb_link_node(&piar->rb_node, parent, p);
+	rb_insert_color(&piar->rb_node, &pci_io_addr_cache_root.rb_root);
+
+	return piar;
+}
+
+static void __pci_addr_cache_insert_device(struct pci_dev *dev)
+{
+	struct device_node *dn;
+	struct pci_dn *pdn;
+	int i;
+	int inserted = 0;
+
+	dn = pci_device_to_OF_node(dev);
+	if (!dn) {
+		printk(KERN_WARNING "PCI: no pci dn found for dev=%s\n", pci_name(dev));
+		return;
+	}
+
+	/* Skip any devices for which EEH is not enabled. */
+	pdn = PCI_DN(dn);
+	if (!(pdn->eeh_mode & EEH_MODE_SUPPORTED) ||
+	    pdn->eeh_mode & EEH_MODE_NOCHECK) {
+#ifdef DEBUG
+		printk(KERN_INFO "PCI: skip building address cache for=%s - %s\n",
+		       pci_name(dev), pdn->node->full_name);
+#endif
+		return;
+	}
+
+	/* The cache holds a reference to the device... */
+	pci_dev_get(dev);
+
+	/* Walk resources on this device, poke them into the tree */
+	for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+		unsigned long start = pci_resource_start(dev,i);
+		unsigned long end = pci_resource_end(dev,i);
+		unsigned int flags = pci_resource_flags(dev,i);
+
+		/* We are interested only bus addresses, not dma or other stuff */
+		if (0 == (flags & (IORESOURCE_IO | IORESOURCE_MEM)))
+			continue;
+		if (start == 0 || ~start == 0 || end == 0 || ~end == 0)
+			 continue;
+		pci_addr_cache_insert(dev, start, end, flags);
+		inserted = 1;
+	}
+
+	/* If there was nothing to add, the cache has no reference... */
+	if (!inserted)
+		pci_dev_put(dev);
+}
+
+/**
+ * pci_addr_cache_insert_device - Add a device to the address cache
+ * @dev: PCI device whose I/O addresses we are interested in.
+ *
+ * In order to support the fast lookup of devices based on addresses,
+ * we maintain a cache of devices that can be quickly searched.
+ * This routine adds a device to that cache.
+ */
+static void pci_addr_cache_insert_device(struct pci_dev *dev)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&pci_io_addr_cache_root.piar_lock, flags);
+	__pci_addr_cache_insert_device(dev);
+	spin_unlock_irqrestore(&pci_io_addr_cache_root.piar_lock, flags);
+}
+
+static inline void __pci_addr_cache_remove_device(struct pci_dev *dev)
+{
+	struct rb_node *n;
+	int removed = 0;
+
+restart:
+	n = rb_first(&pci_io_addr_cache_root.rb_root);
+	while (n) {
+		struct pci_io_addr_range *piar;
+		piar = rb_entry(n, struct pci_io_addr_range, rb_node);
+
+		if (piar->pcidev == dev) {
+			rb_erase(n, &pci_io_addr_cache_root.rb_root);
+			removed = 1;
+			kfree(piar);
+			goto restart;
+		}
+		n = rb_next(n);
+	}
+
+	/* The cache no longer holds its reference to this device... */
+	if (removed)
+		pci_dev_put(dev);
+}
+
+/**
+ * pci_addr_cache_remove_device - remove pci device from addr cache
+ * @dev: device to remove
+ *
+ * Remove a device from the addr-cache tree.
+ * This is potentially expensive, since it will walk
+ * the tree multiple times (once per resource).
+ * But so what; device removal doesn't need to be that fast.
+ */
+static void pci_addr_cache_remove_device(struct pci_dev *dev)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&pci_io_addr_cache_root.piar_lock, flags);
+	__pci_addr_cache_remove_device(dev);
+	spin_unlock_irqrestore(&pci_io_addr_cache_root.piar_lock, flags);
+}
+
+/**
+ * pci_addr_cache_build - Build a cache of I/O addresses
+ *
+ * Build a cache of pci i/o addresses.  This cache will be used to
+ * find the pci device that corresponds to a given address.
+ * This routine scans all pci busses to build the cache.
+ * Must be run late in boot process, after the pci controllers
+ * have been scaned for devices (after all device resources are known).
+ */
+void __init pci_addr_cache_build(void)
+{
+	struct pci_dev *dev = NULL;
+
+	if (!eeh_subsystem_enabled)
+		return;
+
+	spin_lock_init(&pci_io_addr_cache_root.piar_lock);
+
+	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
+		/* Ignore PCI bridges ( XXX why ??) */
+		if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE) {
+			continue;
+		}
+		pci_addr_cache_insert_device(dev);
+	}
+
+#ifdef DEBUG
+	/* Verify tree built up above, echo back the list of addrs. */
+	pci_addr_cache_print(&pci_io_addr_cache_root);
+#endif
+}
+
+/* --------------------------------------------------------------- */
+/* Above lies the PCI Address Cache. Below lies the EEH event infrastructure */
+
+void eeh_slot_error_detail (struct pci_dn *pdn, int severity)
+{
+	unsigned long flags;
+	int rc;
+
+	/* Log the error with the rtas logger */
+	spin_lock_irqsave(&slot_errbuf_lock, flags);
+	memset(slot_errbuf, 0, eeh_error_buf_size);
+
+	rc = rtas_call(ibm_slot_error_detail,
+	               8, 1, NULL, pdn->eeh_config_addr,
+	               BUID_HI(pdn->phb->buid),
+	               BUID_LO(pdn->phb->buid), NULL, 0,
+	               virt_to_phys(slot_errbuf),
+	               eeh_error_buf_size,
+	               severity);
+
+	if (rc == 0)
+		log_error(slot_errbuf, ERR_TYPE_RTAS_LOG, 0);
+	spin_unlock_irqrestore(&slot_errbuf_lock, flags);
+}
+
+/**
+ * eeh_register_notifier - Register to find out about EEH events.
+ * @nb: notifier block to callback on events
+ */
+int eeh_register_notifier(struct notifier_block *nb)
+{
+	return notifier_chain_register(&eeh_notifier_chain, nb);
+}
+
+/**
+ * eeh_unregister_notifier - Unregister to an EEH event notifier.
+ * @nb: notifier block to callback on events
+ */
+int eeh_unregister_notifier(struct notifier_block *nb)
+{
+	return notifier_chain_unregister(&eeh_notifier_chain, nb);
+}
+
+/**
+ * read_slot_reset_state - Read the reset state of a device node's slot
+ * @dn: device node to read
+ * @rets: array to return results in
+ */
+static int read_slot_reset_state(struct pci_dn *pdn, int rets[])
+{
+	int token, outputs;
+
+	if (ibm_read_slot_reset_state2 != RTAS_UNKNOWN_SERVICE) {
+		token = ibm_read_slot_reset_state2;
+		outputs = 4;
+	} else {
+		token = ibm_read_slot_reset_state;
+		rets[2] = 0; /* fake PE Unavailable info */
+		outputs = 3;
+	}
+
+	return rtas_call(token, 3, outputs, rets, pdn->eeh_config_addr,
+			 BUID_HI(pdn->phb->buid), BUID_LO(pdn->phb->buid));
+}
+
+/**
+ * eeh_panic - call panic() for an eeh event that cannot be handled.
+ * The philosophy of this routine is that it is better to panic and
+ * halt the OS than it is to risk possible data corruption by
+ * oblivious device drivers that don't know better.
+ *
+ * @dev pci device that had an eeh event
+ * @reset_state current reset state of the device slot
+ */
+static void eeh_panic(struct pci_dev *dev, int reset_state)
+{
+	/*
+	 * XXX We should create a separate sysctl for this.
+	 *
+	 * Since the panic_on_oops sysctl is used to halt the system
+	 * in light of potential corruption, we can use it here.
+	 */
+	if (panic_on_oops) {
+		struct device_node *dn = pci_device_to_OF_node(dev);
+		eeh_slot_error_detail (PCI_DN(dn), 2 /* Permanent Error */);
+		panic("EEH: MMIO failure (%d) on device:%s\n", reset_state,
+		      pci_name(dev));
+	}
+	else {
+		__get_cpu_var(ignored_failures)++;
+		printk(KERN_INFO "EEH: Ignored MMIO failure (%d) on device:%s\n",
+		       reset_state, pci_name(dev));
+	}
+}
+
+/**
+ * eeh_event_handler - dispatch EEH events.  The detection of a frozen
+ * slot can occur inside an interrupt, where it can be hard to do
+ * anything about it.  The goal of this routine is to pull these
+ * detection events out of the context of the interrupt handler, and
+ * re-dispatch them for processing at a later time in a normal context.
+ *
+ * @dummy - unused
+ */
+static void eeh_event_handler(void *dummy)
+{
+	unsigned long flags;
+	struct eeh_event	*event;
+
+	while (1) {
+		spin_lock_irqsave(&eeh_eventlist_lock, flags);
+		event = NULL;
+		if (!list_empty(&eeh_eventlist)) {
+			event = list_entry(eeh_eventlist.next, struct eeh_event, list);
+			list_del(&event->list);
+		}
+		spin_unlock_irqrestore(&eeh_eventlist_lock, flags);
+		if (event == NULL)
+			break;
+
+		printk(KERN_INFO "EEH: MMIO failure (%d), notifiying device "
+		       "%s\n", event->reset_state,
+		       pci_name(event->dev));
+
+		notifier_call_chain (&eeh_notifier_chain,
+				     EEH_NOTIFY_FREEZE, event);
+
+		pci_dev_put(event->dev);
+		kfree(event);
+	}
+}
+
+/**
+ * eeh_token_to_phys - convert EEH address token to phys address
+ * @token i/o token, should be address in the form 0xA....
+ */
+static inline unsigned long eeh_token_to_phys(unsigned long token)
+{
+	pte_t *ptep;
+	unsigned long pa;
+
+	ptep = find_linux_pte(init_mm.pgd, token);
+	if (!ptep)
+		return token;
+	pa = pte_pfn(*ptep) << PAGE_SHIFT;
+
+	return pa | (token & (PAGE_SIZE-1));
+}
+
+/** 
+ * Return the "partitionable endpoint" (pe) under which this device lies
+ */
+static struct device_node * find_device_pe(struct device_node *dn)
+{
+	while ((dn->parent) && PCI_DN(dn->parent) &&
+	      (PCI_DN(dn->parent)->eeh_mode & EEH_MODE_SUPPORTED)) {
+		dn = dn->parent;
+	}
+	return dn;
+}
+
+/** Mark all devices that are peers of this device as failed.
+ *  Mark the device driver too, so that it can see the failure
+ *  immediately; this is critical, since some drivers poll
+ *  status registers in interrupts ... If a driver is polling,
+ *  and the slot is frozen, then the driver can deadlock in
+ *  an interrupt context, which is bad.
+ */
+
+static inline void __eeh_mark_slot (struct device_node *dn)
+{
+	while (dn) {
+		PCI_DN(dn)->eeh_mode |= EEH_MODE_ISOLATED;
+
+		if (dn->child)
+			__eeh_mark_slot (dn->child);
+		dn = dn->sibling;
+	}
+}
+
+static inline void __eeh_clear_slot (struct device_node *dn)
+{
+	while (dn) {
+		PCI_DN(dn)->eeh_mode &= ~EEH_MODE_ISOLATED;
+		if (dn->child)
+			__eeh_clear_slot (dn->child);
+		dn = dn->sibling;
+	}
+}
+
+static inline void eeh_clear_slot (struct device_node *dn)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&confirm_error_lock, flags);
+	__eeh_clear_slot (dn);
+	spin_unlock_irqrestore(&confirm_error_lock, flags);
+}
+
+/**
+ * eeh_dn_check_failure - check if all 1's data is due to EEH slot freeze
+ * @dn device node
+ * @dev pci device, if known
+ *
+ * Check for an EEH failure for the given device node.  Call this
+ * routine if the result of a read was all 0xff's and you want to
+ * find out if this is due to an EEH slot freeze.  This routine
+ * will query firmware for the EEH status.
+ *
+ * Returns 0 if there has not been an EEH error; otherwise returns
+ * a non-zero value and queues up a slot isolation event notification.
+ *
+ * It is safe to call this routine in an interrupt context.
+ */
+int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
+{
+	int ret;
+	int rets[3];
+	unsigned long flags;
+	int reset_state;
+	struct eeh_event  *event;
+	struct pci_dn *pdn;
+	struct device_node *pe_dn;
+	int rc = 0;
+
+	__get_cpu_var(total_mmio_ffs)++;
+
+	if (!eeh_subsystem_enabled)
+		return 0;
+
+	if (!dn) {
+		__get_cpu_var(no_dn)++;
+		return 0;
+	}
+	pdn = PCI_DN(dn);
+
+	/* Access to IO BARs might get this far and still not want checking. */
+	if (!(pdn->eeh_mode & EEH_MODE_SUPPORTED) ||
+	    pdn->eeh_mode & EEH_MODE_NOCHECK) {
+		__get_cpu_var(ignored_check)++;
+#ifdef DEBUG
+		printk ("EEH:ignored check (%x) for %s %s\n", 
+		        pdn->eeh_mode, pci_name (dev), dn->full_name);
+#endif
+		return 0;
+	}
+
+	if (!pdn->eeh_config_addr) {
+		__get_cpu_var(no_cfg_addr)++;
+		return 0;
+	}
+
+	/* If we already have a pending isolation event for this
+	 * slot, we know it's bad already, we don't need to check.
+	 * Do this checking under a lock; as multiple PCI devices
+	 * in one slot might report errors simultaneously, and we
+	 * only want one error recovery routine running.
+	 */
+	spin_lock_irqsave(&confirm_error_lock, flags);
+	rc = 1;
+	if (pdn->eeh_mode & EEH_MODE_ISOLATED) {
+		pdn->eeh_check_count ++;
+		if (pdn->eeh_check_count >= EEH_MAX_FAILS) {
+			printk (KERN_ERR "EEH: Device driver ignored %d bad reads, panicing\n",
+			        pdn->eeh_check_count);
+			dump_stack();
+			
+			/* re-read the slot reset state */
+			if (read_slot_reset_state(pdn, rets) != 0)
+				rets[0] = -1;	/* reset state unknown */
+
+			/* If we are here, then we hit an infinite loop. Stop. */
+			panic("EEH: MMIO halt (%d) on device:%s\n", rets[0], pci_name(dev));
+		}
+		goto dn_unlock;
+	}
+
+	/*
+	 * Now test for an EEH failure.  This is VERY expensive.
+	 * Note that the eeh_config_addr may be a parent device
+	 * in the case of a device behind a bridge, or it may be
+	 * function zero of a multi-function device.
+	 * In any case they must share a common PHB.
+	 */
+	ret = read_slot_reset_state(pdn, rets);
+
+	/* If the call to firmware failed, punt */
+	if (ret != 0) {
+		printk(KERN_WARNING "EEH: read_slot_reset_state() failed; rc=%d dn=%s\n",
+		       ret, dn->full_name);
+		__get_cpu_var(false_positives)++;
+		rc = 0;
+		goto dn_unlock;
+	}
+
+	/* If EEH is not supported on this device, punt. */
+	if (rets[1] != 1) {
+		printk(KERN_WARNING "EEH: event on unsupported device, rc=%d dn=%s\n",
+		       ret, dn->full_name);
+		__get_cpu_var(false_positives)++;
+		rc = 0;
+		goto dn_unlock;
+	}
+
+	/* If not the kind of error we know about, punt. */
+	if (rets[0] != 2 && rets[0] != 4 && rets[0] != 5) {
+		__get_cpu_var(false_positives)++;
+		rc = 0;
+		goto dn_unlock;
+	}
+
+	/* Note that config-io to empty slots may fail;
+	 * we recognize empty because they don't have children. */
+	if ((rets[0] == 5) && (dn->child == NULL)) {
+		__get_cpu_var(false_positives)++;
+		rc = 0;
+		goto dn_unlock;
+	}
+
+	__get_cpu_var(slot_resets)++;
+ 
+	/* Avoid repeated reports of this failure, including problems
+	 * with other functions on this device, and functions under
+	 * bridges. */
+	pe_dn = find_device_pe (dn);
+	__eeh_mark_slot (pe_dn);
+	spin_unlock_irqrestore(&confirm_error_lock, flags);
+
+	reset_state = rets[0];
+
+	eeh_slot_error_detail (pdn, 1 /* Temporary Error */);
+
+	printk(KERN_INFO "EEH: MMIO failure (%d) on device: %s %s\n",
+	       rets[0], dn->name, dn->full_name);
+	event = kmalloc(sizeof(*event), GFP_ATOMIC);
+	if (event == NULL) {
+		eeh_panic(dev, reset_state);
+		return 1;
+ 	}
+
+	event->dev = dev;
+	event->dn = dn;
+	event->reset_state = reset_state;
+
+	/* We may or may not be called in an interrupt context */
+	spin_lock_irqsave(&eeh_eventlist_lock, flags);
+	list_add(&event->list, &eeh_eventlist);
+	spin_unlock_irqrestore(&eeh_eventlist_lock, flags);
+
+	/* Most EEH events are due to device driver bugs.  Having
+	 * a stack trace will help the device-driver authors figure
+	 * out what happened.  So print that out. */
+	if (rets[0] != 5) dump_stack();
+	schedule_work(&eeh_event_wq);
+
+	return 1;
+
+dn_unlock:
+	spin_unlock_irqrestore(&confirm_error_lock, flags);
+	return rc;
+}
+
+EXPORT_SYMBOL_GPL(eeh_dn_check_failure);
+
+/**
+ * eeh_check_failure - check if all 1's data is due to EEH slot freeze
+ * @token i/o token, should be address in the form 0xA....
+ * @val value, should be all 1's (XXX why do we need this arg??)
+ *
+ * Check for an EEH failure at the given token address.  Call this
+ * routine if the result of a read was all 0xff's and you want to
+ * find out if this is due to an EEH slot freeze event.  This routine
+ * will query firmware for the EEH status.
+ *
+ * Note this routine is safe to call in an interrupt context.
+ */
+unsigned long eeh_check_failure(const volatile void __iomem *token, unsigned long val)
+{
+	unsigned long addr;
+	struct pci_dev *dev;
+	struct device_node *dn;
+
+	/* Finding the phys addr + pci device; this is pretty quick. */
+	addr = eeh_token_to_phys((unsigned long __force) token);
+	dev = pci_get_device_by_addr(addr);
+	if (!dev) {
+		__get_cpu_var(no_device)++;
+		return val;
+	}
+
+	dn = pci_device_to_OF_node(dev);
+	eeh_dn_check_failure (dn, dev);
+
+	pci_dev_put(dev);
+	return val;
+}
+
+EXPORT_SYMBOL(eeh_check_failure);
+
+struct eeh_early_enable_info {
+	unsigned int buid_hi;
+	unsigned int buid_lo;
+};
+
+/* Enable eeh for the given device node. */
+static void *early_enable_eeh(struct device_node *dn, void *data)
+{
+	struct eeh_early_enable_info *info = data;
+	int ret;
+	char *status = get_property(dn, "status", NULL);
+	u32 *class_code = (u32 *)get_property(dn, "class-code", NULL);
+	u32 *vendor_id = (u32 *)get_property(dn, "vendor-id", NULL);
+	u32 *device_id = (u32 *)get_property(dn, "device-id", NULL);
+	u32 *regs;
+	int enable;
+	struct pci_dn *pdn = PCI_DN(dn);
+
+	pdn->eeh_mode = 0;
+	pdn->eeh_check_count = 0;
+	pdn->eeh_freeze_count = 0;
+
+	if (status && strcmp(status, "ok") != 0)
+		return NULL;	/* ignore devices with bad status */
+
+	/* Ignore bad nodes. */
+	if (!class_code || !vendor_id || !device_id)
+		return NULL;
+
+	/* There is nothing to check on PCI to ISA bridges */
+	if (dn->type && !strcmp(dn->type, "isa")) {
+		pdn->eeh_mode |= EEH_MODE_NOCHECK;
+		return NULL;
+	}
+
+	/*
+	 * Now decide if we are going to "Disable" EEH checking
+	 * for this device.  We still run with the EEH hardware active,
+	 * but we won't be checking for ff's.  This means a driver
+	 * could return bad data (very bad!), an interrupt handler could
+	 * hang waiting on status bits that won't change, etc.
+	 * But there are a few cases like display devices that make sense.
+	 */
+	enable = 1;	/* i.e. we will do checking */
+	if ((*class_code >> 16) == PCI_BASE_CLASS_DISPLAY)
+		enable = 0;
+
+	if (!enable)
+		pdn->eeh_mode |= EEH_MODE_NOCHECK;
+
+	/* Ok... see if this device supports EEH.  Some do, some don't,
+	 * and the only way to find out is to check each and every one. */
+	regs = (u32 *)get_property(dn, "reg", NULL);
+	if (regs) {
+		/* First register entry is addr (00BBSS00)  */
+		/* Try to enable eeh */
+		ret = rtas_call(ibm_set_eeh_option, 4, 1, NULL,
+				regs[0], info->buid_hi, info->buid_lo,
+				EEH_ENABLE);
+		if (ret == 0) {
+			eeh_subsystem_enabled = 1;
+			pdn->eeh_mode |= EEH_MODE_SUPPORTED;
+			pdn->eeh_config_addr = regs[0];
+#ifdef DEBUG
+			printk(KERN_DEBUG "EEH: %s: eeh enabled\n", dn->full_name);
+#endif
+		} else {
+
+			/* This device doesn't support EEH, but it may have an
+			 * EEH parent, in which case we mark it as supported. */
+			if (dn->parent && PCI_DN(dn->parent)
+			    && (PCI_DN(dn->parent)->eeh_mode & EEH_MODE_SUPPORTED)) {
+				/* Parent supports EEH. */
+				pdn->eeh_mode |= EEH_MODE_SUPPORTED;
+				pdn->eeh_config_addr = PCI_DN(dn->parent)->eeh_config_addr;
+				return NULL;
+			}
+		}
+	} else {
+		printk(KERN_WARNING "EEH: %s: unable to get reg property.\n",
+		       dn->full_name);
+	}
+
+	return NULL;
+}
+
+/*
+ * Initialize EEH by trying to enable it for all of the adapters in the system.
+ * As a side effect we can determine here if eeh is supported at all.
+ * Note that we leave EEH on so failed config cycles won't cause a machine
+ * check.  If a user turns off EEH for a particular adapter they are really
+ * telling Linux to ignore errors.  Some hardware (e.g. POWER5) won't
+ * grant access to a slot if EEH isn't enabled, and so we always enable
+ * EEH for all slots/all devices.
+ *
+ * The eeh-force-off option disables EEH checking globally, for all slots.
+ * Even if force-off is set, the EEH hardware is still enabled, so that
+ * newer systems can boot.
+ */
+void __init eeh_init(void)
+{
+	struct device_node *phb, *np;
+	struct eeh_early_enable_info info;
+
+	spin_lock_init(&confirm_error_lock);
+	spin_lock_init(&slot_errbuf_lock);
+
+	np = of_find_node_by_path("/rtas");
+	if (np == NULL)
+		return;
+
+	ibm_set_eeh_option = rtas_token("ibm,set-eeh-option");
+	ibm_set_slot_reset = rtas_token("ibm,set-slot-reset");
+	ibm_read_slot_reset_state2 = rtas_token("ibm,read-slot-reset-state2");
+	ibm_read_slot_reset_state = rtas_token("ibm,read-slot-reset-state");
+	ibm_slot_error_detail = rtas_token("ibm,slot-error-detail");
+
+	if (ibm_set_eeh_option == RTAS_UNKNOWN_SERVICE)
+		return;
+
+	eeh_error_buf_size = rtas_token("rtas-error-log-max");
+	if (eeh_error_buf_size == RTAS_UNKNOWN_SERVICE) {
+		eeh_error_buf_size = 1024;
+	}
+	if (eeh_error_buf_size > RTAS_ERROR_LOG_MAX) {
+		printk(KERN_WARNING "EEH: rtas-error-log-max is bigger than allocated "
+		      "buffer ! (%d vs %d)", eeh_error_buf_size, RTAS_ERROR_LOG_MAX);
+		eeh_error_buf_size = RTAS_ERROR_LOG_MAX;
+	}
+
+	/* Enable EEH for all adapters.  Note that eeh requires buid's */
+	for (phb = of_find_node_by_name(NULL, "pci"); phb;
+	     phb = of_find_node_by_name(phb, "pci")) {
+		unsigned long buid;
+
+		buid = get_phb_buid(phb);
+		if (buid == 0 || PCI_DN(phb) == NULL)
+			continue;
+
+		info.buid_lo = BUID_LO(buid);
+		info.buid_hi = BUID_HI(buid);
+		traverse_pci_devices(phb, early_enable_eeh, &info);
+	}
+
+	if (eeh_subsystem_enabled)
+		printk(KERN_INFO "EEH: PCI Enhanced I/O Error Handling Enabled\n");
+	else
+		printk(KERN_WARNING "EEH: No capable adapters found\n");
+}
+
+/**
+ * eeh_add_device_early - enable EEH for the indicated device_node
+ * @dn: device node for which to set up EEH
+ *
+ * This routine must be used to perform EEH initialization for PCI
+ * devices that were added after system boot (e.g. hotplug, dlpar).
+ * This routine must be called before any i/o is performed to the
+ * adapter (inluding any config-space i/o).
+ * Whether this actually enables EEH or not for this device depends
+ * on the CEC architecture, type of the device, on earlier boot
+ * command-line arguments & etc.
+ */
+void eeh_add_device_early(struct device_node *dn)
+{
+	struct pci_controller *phb;
+	struct eeh_early_enable_info info;
+
+	if (!dn || !PCI_DN(dn))
+		return;
+	phb = PCI_DN(dn)->phb;
+	if (NULL == phb || 0 == phb->buid) {
+		printk(KERN_WARNING "EEH: Expected buid but found none for %s\n",
+		       dn->full_name);
+		dump_stack();
+		return;
+	}
+
+	info.buid_hi = BUID_HI(phb->buid);
+	info.buid_lo = BUID_LO(phb->buid);
+	early_enable_eeh(dn, &info);
+}
+EXPORT_SYMBOL_GPL(eeh_add_device_early);
+
+/**
+ * eeh_add_device_late - perform EEH initialization for the indicated pci device
+ * @dev: pci device for which to set up EEH
+ *
+ * This routine must be used to complete EEH initialization for PCI
+ * devices that were added after system boot (e.g. hotplug, dlpar).
+ */
+void eeh_add_device_late(struct pci_dev *dev)
+{
+	struct device_node *dn;
+
+	if (!dev || !eeh_subsystem_enabled)
+		return;
+
+#ifdef DEBUG
+	printk(KERN_DEBUG "EEH: adding device %s\n", pci_name(dev));
+#endif
+
+	pci_dev_get (dev);
+	dn = pci_device_to_OF_node(dev);
+	PCI_DN(dn)->pcidev = dev;
+
+	pci_addr_cache_insert_device (dev);
+}
+EXPORT_SYMBOL_GPL(eeh_add_device_late);
+
+/**
+ * eeh_remove_device - undo EEH setup for the indicated pci device
+ * @dev: pci device to be removed
+ *
+ * This routine should be when a device is removed from a running
+ * system (e.g. by hotplug or dlpar).
+ */
+void eeh_remove_device(struct pci_dev *dev)
+{
+	struct device_node *dn;
+	if (!dev || !eeh_subsystem_enabled)
+		return;
+
+	/* Unregister the device with the EEH/PCI address search system */
+#ifdef DEBUG
+	printk(KERN_DEBUG "EEH: remove device %s\n", pci_name(dev));
+#endif
+	pci_addr_cache_remove_device(dev);
+
+	dn = pci_device_to_OF_node(dev);
+	PCI_DN(dn)->pcidev = NULL;
+	pci_dev_put (dev);
+}
+EXPORT_SYMBOL_GPL(eeh_remove_device);
+
+static int proc_eeh_show(struct seq_file *m, void *v)
+{
+	unsigned int cpu;
+	unsigned long ffs = 0, positives = 0, failures = 0;
+	unsigned long resets = 0;
+	unsigned long no_dev = 0, no_dn = 0, no_cfg = 0, no_check = 0;
+
+	for_each_cpu(cpu) {
+		ffs += per_cpu(total_mmio_ffs, cpu);
+		positives += per_cpu(false_positives, cpu);
+		failures += per_cpu(ignored_failures, cpu);
+		resets += per_cpu(slot_resets, cpu);
+		no_dev += per_cpu(no_device, cpu);
+		no_dn += per_cpu(no_dn, cpu);
+		no_cfg += per_cpu(no_cfg_addr, cpu);
+		no_check += per_cpu(ignored_check, cpu);
+	}
+
+	if (0 == eeh_subsystem_enabled) {
+		seq_printf(m, "EEH Subsystem is globally disabled\n");
+		seq_printf(m, "eeh_total_mmio_ffs=%ld\n", ffs);
+	} else {
+		seq_printf(m, "EEH Subsystem is enabled\n");
+		seq_printf(m,
+				"no device=%ld\n"
+				"no device node=%ld\n"
+				"no config address=%ld\n"
+				"check not wanted=%ld\n"
+				"eeh_total_mmio_ffs=%ld\n"
+				"eeh_false_positives=%ld\n"
+				"eeh_ignored_failures=%ld\n"
+				"eeh_slot_resets=%ld\n",
+				no_dev, no_dn, no_cfg, no_check,
+				ffs, positives, failures, resets);
+	}
+
+	return 0;
+}
+
+static int proc_eeh_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, proc_eeh_show, NULL);
+}
+
+static struct file_operations proc_eeh_operations = {
+	.open      = proc_eeh_open,
+	.read      = seq_read,
+	.llseek    = seq_lseek,
+	.release   = single_release,
+};
+
+static int __init eeh_init_proc(void)
+{
+	struct proc_dir_entry *e;
+
+	if (systemcfg->platform & PLATFORM_PSERIES) {
+		e = create_proc_entry("ppc64/eeh", 0, NULL);
+		if (e)
+			e->proc_fops = &proc_eeh_operations;
+	}
+
+	return 0;
+}
+__initcall(eeh_init_proc);
-- 
cgit v1.1


From 172ca9261800bacbbc7d320d9924d9b482dff8de Mon Sep 17 00:00:00 2001
From: Linas Vepstas <linas@linas.org>
Date: Thu, 3 Nov 2005 18:50:04 -0600
Subject: [PATCH] ppc64: PCI error event dispatcher

12-eeh-event-dispatcher.patch

ppc64: EEH Recovery dispatcher thread

This patch adds a mechanism to create recovery threads when an
EEH event is received.  Since an EEH freeze state may be detected
within an interrupt context, we need to get out of the interrupt
context before starting recovery. This dispatcher does this in
two steps: first, it uses a workqueue to get out, and then
lanuches a kernel thread, so that the recovery routine can
sleep for exteded periods without upseting the keventd.

A kernel thread is created with each EEH event, rather than
having one long-running daemon started at boot time.  This is
because it is anticipated that EEH events will be very rare
(very very rare, ideally) and so its pointless to cluter the
process tables with a daemon that will almost never run.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/platforms/pseries/Makefile    |   2 +-
 arch/powerpc/platforms/pseries/eeh.c       | 138 +++----------------------
 arch/powerpc/platforms/pseries/eeh_event.c | 155 +++++++++++++++++++++++++++++
 3 files changed, 171 insertions(+), 124 deletions(-)
 create mode 100644 arch/powerpc/platforms/pseries/eeh_event.c

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile
index dbdffb2..2751547 100644
--- a/arch/powerpc/platforms/pseries/Makefile
+++ b/arch/powerpc/platforms/pseries/Makefile
@@ -3,4 +3,4 @@ obj-y			:= pci.o lpar.o hvCall.o nvram.o reconfig.o \
 obj-$(CONFIG_SMP)	+= smp.o
 obj-$(CONFIG_IBMVIO)	+= vio.o
 obj-$(CONFIG_XICS)	+= xics.o
-obj-$(CONFIG_EEH)    += eeh.o
+obj-$(CONFIG_EEH)    += eeh.o eeh_event.o
diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index 9df1d50..1fec99d 100644
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -19,7 +19,6 @@
 
 #include <linux/init.h>
 #include <linux/list.h>
-#include <linux/notifier.h>
 #include <linux/pci.h>
 #include <linux/proc_fs.h>
 #include <linux/rbtree.h>
@@ -27,12 +26,12 @@
 #include <linux/spinlock.h>
 #include <asm/atomic.h>
 #include <asm/eeh.h>
+#include <asm/eeh_event.h>
 #include <asm/io.h>
 #include <asm/machdep.h>
+#include <asm/ppc-pci.h>
 #include <asm/rtas.h>
-#include <asm/atomic.h>
 #include <asm/systemcfg.h>
-#include <asm/ppc-pci.h>
 
 #undef DEBUG
 
@@ -70,14 +69,6 @@
  *  and sent out for processing.
  */
 
-/* EEH event workqueue setup. */
-static DEFINE_SPINLOCK(eeh_eventlist_lock);
-LIST_HEAD(eeh_eventlist);
-static void eeh_event_handler(void *);
-DECLARE_WORK(eeh_event_wq, eeh_event_handler, NULL);
-
-static struct notifier_block *eeh_notifier_chain;
-
 /* If a device driver keeps reading an MMIO register in an interrupt
  * handler after a slot isolation event has occurred, we assume it
  * is broken and panic.  This sets the threshold for how many read
@@ -421,24 +412,6 @@ void eeh_slot_error_detail (struct pci_dn *pdn, int severity)
 }
 
 /**
- * eeh_register_notifier - Register to find out about EEH events.
- * @nb: notifier block to callback on events
- */
-int eeh_register_notifier(struct notifier_block *nb)
-{
-	return notifier_chain_register(&eeh_notifier_chain, nb);
-}
-
-/**
- * eeh_unregister_notifier - Unregister to an EEH event notifier.
- * @nb: notifier block to callback on events
- */
-int eeh_unregister_notifier(struct notifier_block *nb)
-{
-	return notifier_chain_unregister(&eeh_notifier_chain, nb);
-}
-
-/**
  * read_slot_reset_state - Read the reset state of a device node's slot
  * @dn: device node to read
  * @rets: array to return results in
@@ -461,73 +434,6 @@ static int read_slot_reset_state(struct pci_dn *pdn, int rets[])
 }
 
 /**
- * eeh_panic - call panic() for an eeh event that cannot be handled.
- * The philosophy of this routine is that it is better to panic and
- * halt the OS than it is to risk possible data corruption by
- * oblivious device drivers that don't know better.
- *
- * @dev pci device that had an eeh event
- * @reset_state current reset state of the device slot
- */
-static void eeh_panic(struct pci_dev *dev, int reset_state)
-{
-	/*
-	 * XXX We should create a separate sysctl for this.
-	 *
-	 * Since the panic_on_oops sysctl is used to halt the system
-	 * in light of potential corruption, we can use it here.
-	 */
-	if (panic_on_oops) {
-		struct device_node *dn = pci_device_to_OF_node(dev);
-		eeh_slot_error_detail (PCI_DN(dn), 2 /* Permanent Error */);
-		panic("EEH: MMIO failure (%d) on device:%s\n", reset_state,
-		      pci_name(dev));
-	}
-	else {
-		__get_cpu_var(ignored_failures)++;
-		printk(KERN_INFO "EEH: Ignored MMIO failure (%d) on device:%s\n",
-		       reset_state, pci_name(dev));
-	}
-}
-
-/**
- * eeh_event_handler - dispatch EEH events.  The detection of a frozen
- * slot can occur inside an interrupt, where it can be hard to do
- * anything about it.  The goal of this routine is to pull these
- * detection events out of the context of the interrupt handler, and
- * re-dispatch them for processing at a later time in a normal context.
- *
- * @dummy - unused
- */
-static void eeh_event_handler(void *dummy)
-{
-	unsigned long flags;
-	struct eeh_event	*event;
-
-	while (1) {
-		spin_lock_irqsave(&eeh_eventlist_lock, flags);
-		event = NULL;
-		if (!list_empty(&eeh_eventlist)) {
-			event = list_entry(eeh_eventlist.next, struct eeh_event, list);
-			list_del(&event->list);
-		}
-		spin_unlock_irqrestore(&eeh_eventlist_lock, flags);
-		if (event == NULL)
-			break;
-
-		printk(KERN_INFO "EEH: MMIO failure (%d), notifiying device "
-		       "%s\n", event->reset_state,
-		       pci_name(event->dev));
-
-		notifier_call_chain (&eeh_notifier_chain,
-				     EEH_NOTIFY_FREEZE, event);
-
-		pci_dev_put(event->dev);
-		kfree(event);
-	}
-}
-
-/**
  * eeh_token_to_phys - convert EEH address token to phys address
  * @token i/o token, should be address in the form 0xA....
  */
@@ -613,8 +519,6 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
 	int ret;
 	int rets[3];
 	unsigned long flags;
-	int reset_state;
-	struct eeh_event  *event;
 	struct pci_dn *pdn;
 	struct device_node *pe_dn;
 	int rc = 0;
@@ -722,33 +626,12 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
 	__eeh_mark_slot (pe_dn);
 	spin_unlock_irqrestore(&confirm_error_lock, flags);
 
-	reset_state = rets[0];
-
-	eeh_slot_error_detail (pdn, 1 /* Temporary Error */);
-
-	printk(KERN_INFO "EEH: MMIO failure (%d) on device: %s %s\n",
-	       rets[0], dn->name, dn->full_name);
-	event = kmalloc(sizeof(*event), GFP_ATOMIC);
-	if (event == NULL) {
-		eeh_panic(dev, reset_state);
-		return 1;
- 	}
-
-	event->dev = dev;
-	event->dn = dn;
-	event->reset_state = reset_state;
-
-	/* We may or may not be called in an interrupt context */
-	spin_lock_irqsave(&eeh_eventlist_lock, flags);
-	list_add(&event->list, &eeh_eventlist);
-	spin_unlock_irqrestore(&eeh_eventlist_lock, flags);
-
+	eeh_send_failure_event (dn, dev, rets[0], rets[2]);
+	
 	/* Most EEH events are due to device driver bugs.  Having
 	 * a stack trace will help the device-driver authors figure
 	 * out what happened.  So print that out. */
 	if (rets[0] != 5) dump_stack();
-	schedule_work(&eeh_event_wq);
-
 	return 1;
 
 dn_unlock:
@@ -793,6 +676,14 @@ unsigned long eeh_check_failure(const volatile void __iomem *token, unsigned lon
 
 EXPORT_SYMBOL(eeh_check_failure);
 
+/* ------------------------------------------------------------- */
+/* The code below deals with enabling EEH for devices during  the
+ * early boot sequence.  EEH must be enabled before any PCI probing
+ * can be done.
+ */
+
+#define EEH_ENABLE 1
+
 struct eeh_early_enable_info {
 	unsigned int buid_hi;
 	unsigned int buid_lo;
@@ -850,8 +741,9 @@ static void *early_enable_eeh(struct device_node *dn, void *data)
 		/* First register entry is addr (00BBSS00)  */
 		/* Try to enable eeh */
 		ret = rtas_call(ibm_set_eeh_option, 4, 1, NULL,
-				regs[0], info->buid_hi, info->buid_lo,
-				EEH_ENABLE);
+		                regs[0], info->buid_hi, info->buid_lo,
+		                EEH_ENABLE);
+
 		if (ret == 0) {
 			eeh_subsystem_enabled = 1;
 			pdn->eeh_mode |= EEH_MODE_SUPPORTED;
diff --git a/arch/powerpc/platforms/pseries/eeh_event.c b/arch/powerpc/platforms/pseries/eeh_event.c
new file mode 100644
index 0000000..9249733
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/eeh_event.c
@@ -0,0 +1,155 @@
+/*
+ * eeh_event.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ * Copyright (c) 2005 Linas Vepstas <linas@linas.org>
+ */
+
+#include <linux/list.h>
+#include <linux/pci.h>
+#include <asm/eeh_event.h>
+
+/** Overview:
+ *  EEH error states may be detected within exception handlers;
+ *  however, the recovery processing needs to occur asynchronously
+ *  in a normal kernel context and not an interrupt context.
+ *  This pair of routines creates an event and queues it onto a
+ *  work-queue, where a worker thread can drive recovery.
+ */
+
+/* EEH event workqueue setup. */
+static spinlock_t eeh_eventlist_lock = SPIN_LOCK_UNLOCKED;
+LIST_HEAD(eeh_eventlist);
+static void eeh_thread_launcher(void *);
+DECLARE_WORK(eeh_event_wq, eeh_thread_launcher, NULL);
+
+/**
+ * eeh_panic - call panic() for an eeh event that cannot be handled.
+ * The philosophy of this routine is that it is better to panic and
+ * halt the OS than it is to risk possible data corruption by
+ * oblivious device drivers that don't know better.
+ *
+ * @dev pci device that had an eeh event
+ * @reset_state current reset state of the device slot
+ */
+static void eeh_panic(struct pci_dev *dev, int reset_state)
+{
+	/*
+	 * Since the panic_on_oops sysctl is used to halt the system
+	 * in light of potential corruption, we can use it here.
+	 */
+	if (panic_on_oops) {
+		panic("EEH: MMIO failure (%d) on device:%s\n", reset_state,
+		      pci_name(dev));
+	}
+	else {
+		printk(KERN_INFO "EEH: Ignored MMIO failure (%d) on device:%s\n",
+		       reset_state, pci_name(dev));
+	}
+}
+
+/**
+ * eeh_event_handler - dispatch EEH events.  The detection of a frozen
+ * slot can occur inside an interrupt, where it can be hard to do
+ * anything about it.  The goal of this routine is to pull these
+ * detection events out of the context of the interrupt handler, and
+ * re-dispatch them for processing at a later time in a normal context.
+ *
+ * @dummy - unused
+ */
+static int eeh_event_handler(void * dummy)
+{
+	unsigned long flags;
+	struct eeh_event	*event;
+
+	daemonize ("eehd");
+
+	while (1) {
+		set_current_state(TASK_INTERRUPTIBLE);
+
+		spin_lock_irqsave(&eeh_eventlist_lock, flags);
+		event = NULL;
+		if (!list_empty(&eeh_eventlist)) {
+			event = list_entry(eeh_eventlist.next, struct eeh_event, list);
+			list_del(&event->list);
+		}
+		spin_unlock_irqrestore(&eeh_eventlist_lock, flags);
+		if (event == NULL)
+			break;
+
+		printk(KERN_INFO "EEH: Detected PCI bus error on device %s\n",
+		       pci_name(event->dev));
+
+		eeh_panic (event->dev, event->state);
+
+		kfree(event);
+	}
+
+	return 0;
+}
+
+/**
+ * eeh_thread_launcher
+ *
+ * @dummy - unused
+ */
+static void eeh_thread_launcher(void *dummy)
+{
+	if (kernel_thread(eeh_event_handler, NULL, CLONE_KERNEL) < 0)
+		printk(KERN_ERR "Failed to start EEH daemon\n");
+}
+
+/**
+ * eeh_send_failure_event - generate a PCI error event
+ * @dev pci device
+ *
+ * This routine can be called within an interrupt context;
+ * the actual event will be delivered in a normal context
+ * (from a workqueue).
+ */
+int eeh_send_failure_event (struct device_node *dn,
+                            struct pci_dev *dev,
+                            int state,
+                            int time_unavail)
+{
+	unsigned long flags;
+	struct eeh_event *event;
+
+	event = kmalloc(sizeof(*event), GFP_ATOMIC);
+	if (event == NULL) {
+		printk (KERN_ERR "EEH: out of memory, event not handled\n");
+		return 1;
+ 	}
+
+	if (dev)
+		pci_dev_get(dev);
+
+	event->dn = dn;
+	event->dev = dev;
+	event->state = state;
+	event->time_unavail = time_unavail;
+
+	/* We may or may not be called in an interrupt context */
+	spin_lock_irqsave(&eeh_eventlist_lock, flags);
+	list_add(&event->list, &eeh_eventlist);
+	spin_unlock_irqrestore(&eeh_eventlist_lock, flags);
+
+	schedule_work(&eeh_event_wq);
+
+	return 0;
+}
+
+/********************** END OF FILE ******************************/
-- 
cgit v1.1


From 6dee3fb94004c43ce09f6bf5e7c0b778ec5b8cc8 Mon Sep 17 00:00:00 2001
From: Linas Vepstas <linas@linas.org>
Date: Thu, 3 Nov 2005 18:50:10 -0600
Subject: [PATCH] ppc64: PCI reset support routines

13-eeh-recovery-support-routines.patch

EEH Recovery support routines

This patch adds routines required to help drive the recovery of
EEH-frozen slots.  The main function is to drive the PCI #RST
signal line high for a qurter of a second, and then allow for
a second & a half of settle time.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/platforms/pseries/eeh.c | 99 ++++++++++++++++++++++++++++++++++++
 1 file changed, 99 insertions(+)

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index 1fec99d..a06c91a 100644
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -17,6 +17,7 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
 
+#include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/list.h>
 #include <linux/pci.h>
@@ -677,6 +678,104 @@ unsigned long eeh_check_failure(const volatile void __iomem *token, unsigned lon
 EXPORT_SYMBOL(eeh_check_failure);
 
 /* ------------------------------------------------------------- */
+/* The code below deals with error recovery */
+
+/** Return negative value if a permanent error, else return
+ * a number of milliseconds to wait until the PCI slot is
+ * ready to be used.
+ */
+static int
+eeh_slot_availability(struct pci_dn *pdn)
+{
+	int rc;
+	int rets[3];
+
+	rc = read_slot_reset_state(pdn, rets);
+
+	if (rc) return rc;
+
+	if (rets[1] == 0) return -1;  /* EEH is not supported */
+	if (rets[0] == 0)  return 0;  /* Oll Korrect */
+	if (rets[0] == 5) {
+		if (rets[2] == 0) return -1; /* permanently unavailable */
+		return rets[2]; /* number of millisecs to wait */
+	}
+	return -1;
+}
+
+/** rtas_pci_slot_reset raises/lowers the pci #RST line
+ *  state: 1/0 to raise/lower the #RST
+ *
+ * Clear the EEH-frozen condition on a slot.  This routine
+ * asserts the PCI #RST line if the 'state' argument is '1',
+ * and drops the #RST line if 'state is '0'.  This routine is
+ * safe to call in an interrupt context.
+ *
+ */
+
+static void
+rtas_pci_slot_reset(struct pci_dn *pdn, int state)
+{
+	int rc;
+
+	BUG_ON (pdn==NULL); 
+
+	if (!pdn->phb) {
+		printk (KERN_WARNING "EEH: in slot reset, device node %s has no phb\n",
+		        pdn->node->full_name);
+		return;
+	}
+
+	rc = rtas_call(ibm_set_slot_reset,4,1, NULL,
+	               pdn->eeh_config_addr,
+	               BUID_HI(pdn->phb->buid),
+	               BUID_LO(pdn->phb->buid),
+	               state);
+	if (rc) {
+		printk (KERN_WARNING "EEH: Unable to reset the failed slot, (%d) #RST=%d dn=%s\n", 
+		        rc, state, pdn->node->full_name);
+		return;
+	}
+
+	if (state == 0)
+		eeh_clear_slot (pdn->node->parent->child);
+}
+
+/** rtas_set_slot_reset -- assert the pci #RST line for 1/4 second
+ *  dn -- device node to be reset.
+ */
+
+void
+rtas_set_slot_reset(struct pci_dn *pdn)
+{
+	int i, rc;
+
+	rtas_pci_slot_reset (pdn, 1);
+
+	/* The PCI bus requires that the reset be held high for at least
+	 * a 100 milliseconds. We wait a bit longer 'just in case'.  */
+
+#define PCI_BUS_RST_HOLD_TIME_MSEC 250
+	msleep (PCI_BUS_RST_HOLD_TIME_MSEC);
+	rtas_pci_slot_reset (pdn, 0);
+
+	/* After a PCI slot has been reset, the PCI Express spec requires
+	 * a 1.5 second idle time for the bus to stabilize, before starting
+	 * up traffic. */
+#define PCI_BUS_SETTLE_TIME_MSEC 1800
+	msleep (PCI_BUS_SETTLE_TIME_MSEC);
+
+	/* Now double check with the firmware to make sure the device is
+	 * ready to be used; if not, wait for recovery. */
+	for (i=0; i<10; i++) {
+		rc = eeh_slot_availability (pdn);
+		if (rc <= 0) break;
+
+		msleep (rc+100);
+	}
+}
+
+/* ------------------------------------------------------------- */
 /* The code below deals with enabling EEH for devices during  the
  * early boot sequence.  EEH must be enabled before any PCI probing
  * can be done.
-- 
cgit v1.1


From 8b553f32db3bf5d0ec0819c595932eb21cd45945 Mon Sep 17 00:00:00 2001
From: Linas Vepstas <linas@linas.org>
Date: Thu, 3 Nov 2005 18:50:17 -0600
Subject: [PATCH] ppc64: Save & restore of PCI device BARS

14-eeh-device-bar-save.patch

After a PCI device has been resest, the device BAR's and other config
space info must be restored to the same state as they were in when
the firmware first handed us this device.  This will allow the
PCI device driver, when restarted, to correctly recognize and set up
the device.

Tis patch saves the device config space as early as reasonable after
the firmware has handed over the device.  Te state resore funcion
is inteded for use by the EEH recovery routines.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/platforms/pseries/eeh.c | 115 ++++++++++++++++++++++++++++++++++-
 1 file changed, 114 insertions(+), 1 deletion(-)

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index a06c91a..b760836 100644
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -77,6 +77,9 @@
  */
 #define EEH_MAX_FAILS	100000
 
+/* Misc forward declaraions */
+static void eeh_save_bars(struct pci_dev * pdev, struct pci_dn *pdn);
+
 /* RTAS tokens */
 static int ibm_set_eeh_option;
 static int ibm_set_slot_reset;
@@ -366,6 +369,7 @@ static void pci_addr_cache_remove_device(struct pci_dev *dev)
  */
 void __init pci_addr_cache_build(void)
 {
+	struct device_node *dn;
 	struct pci_dev *dev = NULL;
 
 	if (!eeh_subsystem_enabled)
@@ -379,6 +383,10 @@ void __init pci_addr_cache_build(void)
 			continue;
 		}
 		pci_addr_cache_insert_device(dev);
+
+		/* Save the BAR's; firmware doesn't restore these after EEH reset */
+		dn = pci_device_to_OF_node(dev);
+		eeh_save_bars(dev, PCI_DN(dn));
 	}
 
 #ifdef DEBUG
@@ -775,6 +783,108 @@ rtas_set_slot_reset(struct pci_dn *pdn)
 	}
 }
 
+/* ------------------------------------------------------- */
+/** Save and restore of PCI BARs
+ *
+ * Although firmware will set up BARs during boot, it doesn't
+ * set up device BAR's after a device reset, although it will,
+ * if requested, set up bridge configuration. Thus, we need to
+ * configure the PCI devices ourselves.  
+ */
+
+/**
+ * __restore_bars - Restore the Base Address Registers
+ * Loads the PCI configuration space base address registers,
+ * the expansion ROM base address, the latency timer, and etc.
+ * from the saved values in the device node.
+ */
+static inline void __restore_bars (struct pci_dn *pdn)
+{
+	int i;
+
+	if (NULL==pdn->phb) return;
+	for (i=4; i<10; i++) {
+		rtas_write_config(pdn, i*4, 4, pdn->config_space[i]);
+	}
+
+	/* 12 == Expansion ROM Address */
+	rtas_write_config(pdn, 12*4, 4, pdn->config_space[12]);
+
+#define BYTE_SWAP(OFF) (8*((OFF)/4)+3-(OFF))
+#define SAVED_BYTE(OFF) (((u8 *)(pdn->config_space))[BYTE_SWAP(OFF)])
+
+	rtas_write_config (pdn, PCI_CACHE_LINE_SIZE, 1,
+	            SAVED_BYTE(PCI_CACHE_LINE_SIZE));
+
+	rtas_write_config (pdn, PCI_LATENCY_TIMER, 1,
+	            SAVED_BYTE(PCI_LATENCY_TIMER));
+
+	/* max latency, min grant, interrupt pin and line */
+	rtas_write_config(pdn, 15*4, 4, pdn->config_space[15]);
+}
+
+/**
+ * eeh_restore_bars - restore the PCI config space info
+ *
+ * This routine performs a recursive walk to the children
+ * of this device as well.
+ */
+void eeh_restore_bars(struct pci_dn *pdn)
+{
+	struct device_node *dn;
+	if (!pdn) 
+		return;
+	
+	if (! pdn->eeh_is_bridge)
+		__restore_bars (pdn);
+
+	dn = pdn->node->child;
+	while (dn) {
+		eeh_restore_bars (PCI_DN(dn));
+		dn = dn->sibling;
+	}
+}
+
+/**
+ * eeh_save_bars - save device bars
+ *
+ * Save the values of the device bars. Unlike the restore
+ * routine, this routine is *not* recursive. This is because
+ * PCI devices are added individuallly; but, for the restore,
+ * an entire slot is reset at a time.
+ */
+static void eeh_save_bars(struct pci_dev * pdev, struct pci_dn *pdn)
+{
+	int i;
+
+	if (!pdev || !pdn )
+		return;
+	
+	for (i = 0; i < 16; i++)
+		pci_read_config_dword(pdev, i * 4, &pdn->config_space[i]);
+
+	if (pdev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
+		pdn->eeh_is_bridge = 1;
+}
+
+void
+rtas_configure_bridge(struct pci_dn *pdn)
+{
+	int token = rtas_token ("ibm,configure-bridge");
+	int rc;
+
+	if (token == RTAS_UNKNOWN_SERVICE)
+		return;
+	rc = rtas_call(token,3,1, NULL,
+	               pdn->eeh_config_addr,
+	               BUID_HI(pdn->phb->buid),
+	               BUID_LO(pdn->phb->buid));
+	if (rc) {
+		printk (KERN_WARNING "EEH: Unable to configure device bridge (%d) for %s\n",
+		        rc, pdn->node->full_name);
+	}
+}
+
 /* ------------------------------------------------------------- */
 /* The code below deals with enabling EEH for devices during  the
  * early boot sequence.  EEH must be enabled before any PCI probing
@@ -977,6 +1087,7 @@ EXPORT_SYMBOL_GPL(eeh_add_device_early);
 void eeh_add_device_late(struct pci_dev *dev)
 {
 	struct device_node *dn;
+	struct pci_dn *pdn;
 
 	if (!dev || !eeh_subsystem_enabled)
 		return;
@@ -987,9 +1098,11 @@ void eeh_add_device_late(struct pci_dev *dev)
 
 	pci_dev_get (dev);
 	dn = pci_device_to_OF_node(dev);
-	PCI_DN(dn)->pcidev = dev;
+	pdn = PCI_DN(dn);
+	pdn->pcidev = dev;
 
 	pci_addr_cache_insert_device (dev);
+	eeh_save_bars(dev, pdn);
 }
 EXPORT_SYMBOL_GPL(eeh_add_device_late);
 
-- 
cgit v1.1


From a23414beb6607dfd40d3245f7df9dd97a4e2c82b Mon Sep 17 00:00:00 2001
From: Paul Mackerras <paulus@samba.org>
Date: Thu, 10 Nov 2005 12:00:55 +1100
Subject: ppc/powerpc: workarounds for old Open Firmware versions

This adds code to work around some problems with old versions of
Open Firmware, such as on the early powermacs (7500 etc.) and the
"Longtrail" CHRP machine.  On these machines we have to claim
the physical and virtual address ranges explicitly when claiming
memory and then set up a V->P mapping.

The Longtrail has more problems: setprop doesn't work, and we have
to set an "allow-reclaim" variable to 0 in order to get claim on
physical memory ranges to fail if the memory is already claimed.

Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/kernel/prom.c          |   9 +-
 arch/powerpc/kernel/prom_init.c     | 170 +++++++++++++++++++++++++++---------
 arch/powerpc/platforms/chrp/setup.c |   4 +-
 3 files changed, 138 insertions(+), 45 deletions(-)

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index f645adb..5af39f8 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -1264,7 +1264,14 @@ static int __init early_init_dt_scan_memory(unsigned long node,
 	unsigned long l;
 
 	/* We are scanning "memory" nodes only */
-	if (type == NULL || strcmp(type, "memory") != 0)
+	if (type == NULL) {
+		/*
+		 * The longtrail doesn't have a device_type on the
+		 * /memory node, so look for the node called /memory@0.
+		 */
+		if (depth != 1 || strcmp(uname, "memory@0") != 0)
+			return 0;
+	} else if (strcmp(type, "memory") != 0)
 		return 0;
 
 	reg = (cell_t *)of_get_flat_dt_prop(node, "reg", &l);
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 58f0917..09db1bb 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -94,11 +94,17 @@ extern const struct linux_logo logo_linux_clut224;
 #ifdef CONFIG_PPC64
 #define RELOC(x)        (*PTRRELOC(&(x)))
 #define ADDR(x)		(u32) add_reloc_offset((unsigned long)(x))
+#define OF_WORKAROUNDS	0
 #else
 #define RELOC(x)	(x)
 #define ADDR(x)		(u32) (x)
+#define OF_WORKAROUNDS	of_workarounds
+int of_workarounds;
 #endif
 
+#define OF_WA_CLAIM	1	/* do phys/virt claim separately, then map */
+#define OF_WA_LONGTRAIL	2	/* work around longtrail bugs */
+
 #define PROM_BUG() do {						\
         prom_printf("kernel BUG at %s line 0x%x!\n",		\
 		    RELOC(__FILE__), __LINE__);			\
@@ -128,10 +134,11 @@ struct prom_args {
 
 struct prom_t {
 	ihandle root;
-	ihandle chosen;
+	phandle chosen;
 	int cpu;
 	ihandle stdout;
 	ihandle mmumap;
+	ihandle memory;
 };
 
 struct mem_map_entry {
@@ -360,16 +367,36 @@ static void __init prom_printf(const char *format, ...)
 static unsigned int __init prom_claim(unsigned long virt, unsigned long size,
 				unsigned long align)
 {
-	int ret;
 	struct prom_t *_prom = &RELOC(prom);
 
-	ret = call_prom("claim", 3, 1, (prom_arg_t)virt, (prom_arg_t)size,
-			(prom_arg_t)align);
-	if (ret != -1 && _prom->mmumap != 0)
-		/* old pmacs need us to map as well */
+	if (align == 0 && (OF_WORKAROUNDS & OF_WA_CLAIM)) {
+		/*
+		 * Old OF requires we claim physical and virtual separately
+		 * and then map explicitly (assuming virtual mode)
+		 */
+		int ret;
+		prom_arg_t result;
+
+		ret = call_prom_ret("call-method", 5, 2, &result,
+				    ADDR("claim"), _prom->memory,
+				    align, size, virt);
+		if (ret != 0 || result == -1)
+			return -1;
+		ret = call_prom_ret("call-method", 5, 2, &result,
+				    ADDR("claim"), _prom->mmumap,
+				    align, size, virt);
+		if (ret != 0) {
+			call_prom("call-method", 4, 1, ADDR("release"),
+				  _prom->memory, size, virt);
+			return -1;
+		}
+		/* the 0x12 is M (coherence) + PP == read/write */
 		call_prom("call-method", 6, 1,
-			  ADDR("map"), _prom->mmumap, 0, size, virt, virt);
-	return ret;
+			  ADDR("map"), _prom->mmumap, 0x12, size, virt, virt);
+		return virt;
+	}
+	return call_prom("claim", 3, 1, (prom_arg_t)virt, (prom_arg_t)size,
+			 (prom_arg_t)align);
 }
 
 static void __init __attribute__((noreturn)) prom_panic(const char *reason)
@@ -415,11 +442,52 @@ static int inline prom_getproplen(phandle node, const char *pname)
 	return call_prom("getproplen", 2, 1, node, ADDR(pname));
 }
 
-static int inline prom_setprop(phandle node, const char *pname,
-			       void *value, size_t valuelen)
+static void add_string(char **str, const char *q)
 {
-	return call_prom("setprop", 4, 1, node, ADDR(pname),
-			 (u32)(unsigned long) value, (u32) valuelen);
+	char *p = *str;
+
+	while (*q)
+		*p++ = *q++;
+	*p++ = ' ';
+	*str = p;
+}
+
+static char *tohex(unsigned int x)
+{
+	static char digits[] = "0123456789abcdef";
+	static char result[9];
+	int i;
+
+	result[8] = 0;
+	i = 8;
+	do {
+		--i;
+		result[i] = digits[x & 0xf];
+		x >>= 4;
+	} while (x != 0 && i > 0);
+	return &result[i];
+}
+
+static int __init prom_setprop(phandle node, const char *nodename,
+			       const char *pname, void *value, size_t valuelen)
+{
+	char cmd[256], *p;
+
+	if (!(OF_WORKAROUNDS & OF_WA_LONGTRAIL))
+		return call_prom("setprop", 4, 1, node, ADDR(pname),
+				 (u32)(unsigned long) value, (u32) valuelen);
+
+	/* gah... setprop doesn't work on longtrail, have to use interpret */
+	p = cmd;
+	add_string(&p, "dev");
+	add_string(&p, nodename);
+	add_string(&p, tohex((u32)(unsigned long) value));
+	add_string(&p, tohex(valuelen));
+	add_string(&p, tohex(ADDR(pname)));
+	add_string(&p, tohex(strlen(RELOC(pname))));
+	add_string(&p, "property");
+	*p = 0;
+	return call_prom("interpret", 1, 1, (u32)(unsigned long) cmd);
 }
 
 /* We can't use the standard versions because of RELOC headaches. */
@@ -980,7 +1048,7 @@ static void __init prom_instantiate_rtas(void)
 
 	rtas_inst = call_prom("open", 1, 1, ADDR("/rtas"));
 	if (!IHANDLE_VALID(rtas_inst)) {
-		prom_printf("opening rtas package failed");
+		prom_printf("opening rtas package failed (%x)\n", rtas_inst);
 		return;
 	}
 
@@ -988,7 +1056,7 @@ static void __init prom_instantiate_rtas(void)
 
 	if (call_prom_ret("call-method", 3, 2, &entry,
 			  ADDR("instantiate-rtas"),
-			  rtas_inst, base) == PROM_ERROR
+			  rtas_inst, base) != 0
 	    || entry == 0) {
 		prom_printf(" failed\n");
 		return;
@@ -997,8 +1065,10 @@ static void __init prom_instantiate_rtas(void)
 
 	reserve_mem(base, size);
 
-	prom_setprop(rtas_node, "linux,rtas-base", &base, sizeof(base));
-	prom_setprop(rtas_node, "linux,rtas-entry", &entry, sizeof(entry));
+	prom_setprop(rtas_node, "/rtas", "linux,rtas-base",
+		     &base, sizeof(base));
+	prom_setprop(rtas_node, "/rtas", "linux,rtas-entry",
+		     &entry, sizeof(entry));
 
 	prom_debug("rtas base     = 0x%x\n", base);
 	prom_debug("rtas entry    = 0x%x\n", entry);
@@ -1089,10 +1159,6 @@ static void __init prom_initialize_tce_table(void)
 		if (base < local_alloc_bottom)
 			local_alloc_bottom = base;
 
-		/* Save away the TCE table attributes for later use. */
-		prom_setprop(node, "linux,tce-base", &base, sizeof(base));
-		prom_setprop(node, "linux,tce-size", &minsize, sizeof(minsize));
-
 		/* It seems OF doesn't null-terminate the path :-( */
 		memset(path, 0, sizeof(path));
 		/* Call OF to setup the TCE hardware */
@@ -1101,6 +1167,10 @@ static void __init prom_initialize_tce_table(void)
 			prom_printf("package-to-path failed\n");
 		}
 
+		/* Save away the TCE table attributes for later use. */
+		prom_setprop(node, path, "linux,tce-base", &base, sizeof(base));
+		prom_setprop(node, path, "linux,tce-size", &minsize, sizeof(minsize));
+
 		prom_debug("TCE table: %s\n", path);
 		prom_debug("\tnode = 0x%x\n", node);
 		prom_debug("\tbase = 0x%x\n", base);
@@ -1342,6 +1412,7 @@ static void __init prom_init_client_services(unsigned long pp)
 /*
  * For really old powermacs, we need to map things we claim.
  * For that, we need the ihandle of the mmu.
+ * Also, on the longtrail, we need to work around other bugs.
  */
 static void __init prom_find_mmu(void)
 {
@@ -1355,12 +1426,19 @@ static void __init prom_find_mmu(void)
 	if (prom_getprop(oprom, "model", version, sizeof(version)) <= 0)
 		return;
 	version[sizeof(version) - 1] = 0;
-	prom_printf("OF version is '%s'\n", version);
 	/* XXX might need to add other versions here */
-	if (strcmp(version, "Open Firmware, 1.0.5") != 0)
+	if (strcmp(version, "Open Firmware, 1.0.5") == 0)
+		of_workarounds = OF_WA_CLAIM;
+	else if (strncmp(version, "FirmWorks,3.", 12) == 0) {
+		of_workarounds = OF_WA_CLAIM | OF_WA_LONGTRAIL;
+		call_prom("interpret", 1, 1, "dev /memory 0 to allow-reclaim");
+	} else
 		return;
+	_prom->memory = call_prom("open", 1, 1, ADDR("/memory"));
 	prom_getprop(_prom->chosen, "mmu", &_prom->mmumap,
 		     sizeof(_prom->mmumap));
+	if (!IHANDLE_VALID(_prom->memory) || !IHANDLE_VALID(_prom->mmumap))
+		of_workarounds &= ~OF_WA_CLAIM;		/* hmmm */
 }
 #else
 #define prom_find_mmu()
@@ -1382,16 +1460,17 @@ static void __init prom_init_stdout(void)
 	memset(path, 0, 256);
 	call_prom("instance-to-path", 3, 1, _prom->stdout, path, 255);
 	val = call_prom("instance-to-package", 1, 1, _prom->stdout);
-	prom_setprop(_prom->chosen, "linux,stdout-package", &val, sizeof(val));
+	prom_setprop(_prom->chosen, "/chosen", "linux,stdout-package",
+		     &val, sizeof(val));
 	prom_printf("OF stdout device is: %s\n", RELOC(of_stdout_device));
-	prom_setprop(_prom->chosen, "linux,stdout-path",
-		     RELOC(of_stdout_device), strlen(RELOC(of_stdout_device))+1);
+	prom_setprop(_prom->chosen, "/chosen", "linux,stdout-path",
+		     path, strlen(path) + 1);
 
 	/* If it's a display, note it */
 	memset(type, 0, sizeof(type));
 	prom_getprop(val, "device_type", type, sizeof(type));
 	if (strcmp(type, RELOC("display")) == 0)
-		prom_setprop(val, "linux,boot-display", NULL, 0);
+		prom_setprop(val, path, "linux,boot-display", NULL, 0);
 }
 
 static void __init prom_close_stdin(void)
@@ -1514,7 +1593,7 @@ static void __init prom_check_displays(void)
 
 		/* Success */
 		prom_printf("done\n");
-		prom_setprop(node, "linux,opened", NULL, 0);
+		prom_setprop(node, path, "linux,opened", NULL, 0);
 
 		/* Setup a usable color table when the appropriate
 		 * method is available. Should update this to set-colors */
@@ -1884,9 +1963,11 @@ static void __init fixup_device_tree(void)
 	/* interrupt on this revision of u3 is number 0 and level */
 	interrupts[0] = 0;
 	interrupts[1] = 1;
-	prom_setprop(i2c, "interrupts", &interrupts, sizeof(interrupts));
+	prom_setprop(i2c, "/u3@0,f8000000/i2c@f8001000", "interrupts",
+		     &interrupts, sizeof(interrupts));
 	parent = (u32)mpic;
-	prom_setprop(i2c, "interrupt-parent", &parent, sizeof(parent));
+	prom_setprop(i2c, "/u3@0,f8000000/i2c@f8001000", "interrupt-parent",
+		     &parent, sizeof(parent));
 #endif
 }
 
@@ -1922,11 +2003,11 @@ static void __init prom_check_initrd(unsigned long r3, unsigned long r4)
 		RELOC(prom_initrd_end) = RELOC(prom_initrd_start) + r4;
 
 		val = RELOC(prom_initrd_start);
-		prom_setprop(_prom->chosen, "linux,initrd-start", &val,
-			     sizeof(val));
+		prom_setprop(_prom->chosen, "/chosen", "linux,initrd-start",
+			     &val, sizeof(val));
 		val = RELOC(prom_initrd_end);
-		prom_setprop(_prom->chosen, "linux,initrd-end", &val,
-			     sizeof(val));
+		prom_setprop(_prom->chosen, "/chosen", "linux,initrd-end",
+			     &val, sizeof(val));
 
 		reserve_mem(RELOC(prom_initrd_start),
 			    RELOC(prom_initrd_end) - RELOC(prom_initrd_start));
@@ -1969,14 +2050,15 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4,
 	prom_init_client_services(pp);
 
 	/*
-	 * Init prom stdout device
+	 * See if this OF is old enough that we need to do explicit maps
+	 * and other workarounds
 	 */
-	prom_init_stdout();
+	prom_find_mmu();
 
 	/*
-	 * See if this OF is old enough that we need to do explicit maps
+	 * Init prom stdout device
 	 */
-	prom_find_mmu();
+	prom_init_stdout();
 
 	/*
 	 * Check for an initrd
@@ -1989,7 +2071,7 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4,
 	 */
 	RELOC(of_platform) = prom_find_machine_type();
 	getprop_rval = RELOC(of_platform);
-	prom_setprop(_prom->chosen, "linux,platform",
+	prom_setprop(_prom->chosen, "/chosen", "linux,platform",
 		     &getprop_rval, sizeof(getprop_rval));
 
 #ifdef CONFIG_PPC_PSERIES
@@ -2050,21 +2132,23 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4,
 	 * Fill in some infos for use by the kernel later on
 	 */
 	if (RELOC(prom_memory_limit))
-		prom_setprop(_prom->chosen, "linux,memory-limit",
+		prom_setprop(_prom->chosen, "/chosen", "linux,memory-limit",
 			     &RELOC(prom_memory_limit),
 			     sizeof(prom_memory_limit));
 #ifdef CONFIG_PPC64
 	if (RELOC(ppc64_iommu_off))
-		prom_setprop(_prom->chosen, "linux,iommu-off", NULL, 0);
+		prom_setprop(_prom->chosen, "/chosen", "linux,iommu-off",
+			     NULL, 0);
 
 	if (RELOC(iommu_force_on))
-		prom_setprop(_prom->chosen, "linux,iommu-force-on", NULL, 0);
+		prom_setprop(_prom->chosen, "/chosen", "linux,iommu-force-on",
+			     NULL, 0);
 
 	if (RELOC(prom_tce_alloc_start)) {
-		prom_setprop(_prom->chosen, "linux,tce-alloc-start",
+		prom_setprop(_prom->chosen, "/chosen", "linux,tce-alloc-start",
 			     &RELOC(prom_tce_alloc_start),
 			     sizeof(prom_tce_alloc_start));
-		prom_setprop(_prom->chosen, "linux,tce-alloc-end",
+		prom_setprop(_prom->chosen, "/chosen", "linux,tce-alloc-end",
 			     &RELOC(prom_tce_alloc_end),
 			     sizeof(prom_tce_alloc_end));
 	}
diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c
index ecd32d5..4099dda 100644
--- a/arch/powerpc/platforms/chrp/setup.c
+++ b/arch/powerpc/platforms/chrp/setup.c
@@ -361,7 +361,9 @@ static void __init chrp_find_openpic(void)
 	printk(KERN_INFO "OpenPIC at %lx\n", opaddr);
 
 	irq_count = NR_IRQS - NUM_ISA_INTERRUPTS - 4; /* leave room for IPIs */
-	prom_get_irq_senses(init_senses, NUM_8259_INTERRUPTS, NR_IRQS - 4);
+	prom_get_irq_senses(init_senses, NUM_ISA_INTERRUPTS, NR_IRQS - 4);
+	/* i8259 cascade is always positive level */
+	init_senses[0] = IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE;
 
 	iranges = (unsigned int *) get_property(np, "interrupt-ranges", &len);
 	if (iranges == NULL)
-- 
cgit v1.1


From 00557b59c69ce284e5a61bcfcdbcc3dc867cb2da Mon Sep 17 00:00:00 2001
From: Paul Mackerras <paulus@samba.org>
Date: Thu, 10 Nov 2005 12:01:41 +1100
Subject: powerpc: Fix find_next_bit on 32-bit

We had a "64" that didn't get changed to BITS_PER_LONG, resulting
in find_next_bit not working correctly.

Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/lib/bitops.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/lib/bitops.c b/arch/powerpc/lib/bitops.c
index b67ce30..f68ad71 100644
--- a/arch/powerpc/lib/bitops.c
+++ b/arch/powerpc/lib/bitops.c
@@ -41,7 +41,7 @@ unsigned long find_next_bit(const unsigned long *addr, unsigned long size,
 	tmp = *p;
 
 found_first:
-	tmp &= (~0UL >> (64 - size));
+	tmp &= (~0UL >> (BITS_PER_LONG - size));
 	if (tmp == 0UL)		/* Are any bits set? */
 		return result + size;	/* Nope. */
 found_middle:
-- 
cgit v1.1


From 26ef5c09576496dfd08d2b36ec1d08a6f917a0eb Mon Sep 17 00:00:00 2001
From: David Gibson <david@gibson.dropbear.id.au>
Date: Thu, 10 Nov 2005 11:50:16 +1100
Subject: [PATCH] powerpc: Merge cacheflush.h and cache.h

The ppc32 and ppc64 versions of cacheflush.h were almost identical.
The two versions of cache.h are fairly similar, except for a bunch of
register definitions in the ppc32 version which probably belong better
elsewhere.  This patch, therefore, merges both headers.  Notable
points:
	- there are several functions in cacheflush.h which exist only
on ppc32 or only on ppc64.  These are handled by #ifdef for now, but
these should probably be consolidated, along with the actual code
behind them later.
	- Confusingly, both ppc32 and ppc64 have a
flush_dcache_range(), but they're subtly different: it uses dcbf on
ppc32 and dcbst on ppc64, ppc64 has a flush_inval_dcache_range() which
uses dcbf.  These too should be merged and consolidated later.
	- Also flush_dcache_range() was defined in cacheflush.h on
ppc64, and in cache.h on ppc32.  In the merged version it's in
cacheflush.h
	- On ppc32 flush_icache_range() is a normal function from
misc.S.  On ppc64, it was wrapper, testing a feature bit before
calling __flush_icache_range() which does the actual flush.  This
patch takes the ppc64 approach, which amounts to no change on ppc32,
since CPU_FTR_COHERENT_ICACHE will never be set there, but does mean
renaming flush_icache_range() to __flush_icache_range() in
arch/ppc/kernel/misc.S and arch/powerpc/kernel/misc_32.S
	- The PReP register info from asm-ppc/cache.h has moved to
arch/ppc/platforms/prep_setup.c
	- The 8xx register info from asm-ppc/cache.h has moved to a
new asm-powerpc/reg_8xx.h, included from reg.h
	- flush_dcache_all() was defined on ppc32 (only), but was
never called (although it was exported).  Thus this patch removes it
from cacheflush.h and from ARCH=powerpc (misc_32.S) entirely.  It's
left in ARCH=ppc for now, with the prototype moved to ppc_ksyms.c.

Built for Walnut (ARCH=ppc), 32-bit multiplatform (pmac, CHRP and PReP
ARCH=ppc, pmac and CHRP ARCH=powerpc).  Built and booted on POWER5
LPAR (ARCH=powerpc and ARCH=ppc64).

Built for 32-bit powermac (ARCH=ppc and ARCH=powerpc).  Built and
booted on POWER5 LPAR (ARCH=powerpc and ARCH=ppc64).  Built and booted
on G5 (ARCH=powerpc)

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/kernel/misc_32.S | 23 +----------------------
 1 file changed, 1 insertion(+), 22 deletions(-)

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index 3bedb53..f6d84a7 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -519,7 +519,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE)
  *
  * flush_icache_range(unsigned long start, unsigned long stop)
  */
-_GLOBAL(flush_icache_range)
+_GLOBAL(__flush_icache_range)
 BEGIN_FTR_SECTION
 	blr				/* for 601, do nothing */
 END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE)
@@ -607,27 +607,6 @@ _GLOBAL(invalidate_dcache_range)
 	sync				/* wait for dcbi's to get to ram */
 	blr
 
-#ifdef CONFIG_NOT_COHERENT_CACHE
-/*
- * 40x cores have 8K or 16K dcache and 32 byte line size.
- * 44x has a 32K dcache and 32 byte line size.
- * 8xx has 1, 2, 4, 8K variants.
- * For now, cover the worst case of the 44x.
- * Must be called with external interrupts disabled.
- */
-#define CACHE_NWAYS	64
-#define CACHE_NLINES	16
-
-_GLOBAL(flush_dcache_all)
-	li	r4, (2 * CACHE_NWAYS * CACHE_NLINES)
-	mtctr	r4
-	lis     r5, KERNELBASE@h
-1:	lwz	r3, 0(r5)		/* Load one word from every line */
-	addi	r5, r5, L1_CACHE_BYTES
-	bdnz    1b
-	blr
-#endif /* CONFIG_NOT_COHERENT_CACHE */
-
 /*
  * Flush a particular page from the data cache to RAM.
  * Note: this is necessary because the instruction cache does *not*
-- 
cgit v1.1


From f6d3577da14e877b79517c883d1139ee6ad7da45 Mon Sep 17 00:00:00 2001
From: David Gibson <david@gibson.dropbear.id.au>
Date: Thu, 10 Nov 2005 12:42:17 +1100
Subject: [PATCH] powerpc: Move scanlog.c to platforms/pseries

scanlog.c is only compiled on pSeries.  Thus, this patch moves it to
platforms/pseries.

Built and booted on pSeries LPAR (ARCH=powerpc and ARCH=ppc64).  Built
for iSeries (ARCH=powerpc).

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/platforms/pseries/Makefile  |   1 +
 arch/powerpc/platforms/pseries/scanlog.c | 235 +++++++++++++++++++++++++++++++
 2 files changed, 236 insertions(+)
 create mode 100644 arch/powerpc/platforms/pseries/scanlog.c

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile
index 2751547..e7ca5b1 100644
--- a/arch/powerpc/platforms/pseries/Makefile
+++ b/arch/powerpc/platforms/pseries/Makefile
@@ -3,4 +3,5 @@ obj-y			:= pci.o lpar.o hvCall.o nvram.o reconfig.o \
 obj-$(CONFIG_SMP)	+= smp.o
 obj-$(CONFIG_IBMVIO)	+= vio.o
 obj-$(CONFIG_XICS)	+= xics.o
+obj-$(CONFIG_SCANLOG)	+= scanlog.o
 obj-$(CONFIG_EEH)    += eeh.o eeh_event.o
diff --git a/arch/powerpc/platforms/pseries/scanlog.c b/arch/powerpc/platforms/pseries/scanlog.c
new file mode 100644
index 0000000..2edc947
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/scanlog.c
@@ -0,0 +1,235 @@
+/*
+ *  c 2001 PPC 64 Team, IBM Corp
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ *
+ * scan-log-data driver for PPC64  Todd Inglett <tinglett@vnet.ibm.com>
+ *
+ * When ppc64 hardware fails the service processor dumps internal state
+ * of the system.  After a reboot the operating system can access a dump
+ * of this data using this driver.  A dump exists if the device-tree
+ * /chosen/ibm,scan-log-data property exists.
+ *
+ * This driver exports /proc/ppc64/scan-log-dump which can be read.
+ * The driver supports only sequential reads.
+ *
+ * The driver looks at a write to the driver for the single word "reset".
+ * If given, the driver will reset the scanlog so the platform can free it.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/proc_fs.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <asm/uaccess.h>
+#include <asm/rtas.h>
+#include <asm/prom.h>
+
+#define MODULE_VERS "1.0"
+#define MODULE_NAME "scanlog"
+
+/* Status returns from ibm,scan-log-dump */
+#define SCANLOG_COMPLETE 0
+#define SCANLOG_HWERROR -1
+#define SCANLOG_CONTINUE 1
+
+#define DEBUG(A...) do { if (scanlog_debug) printk(KERN_ERR "scanlog: " A); } while (0)
+
+static int scanlog_debug;
+static unsigned int ibm_scan_log_dump;			/* RTAS token */
+static struct proc_dir_entry *proc_ppc64_scan_log_dump;	/* The proc file */
+
+static ssize_t scanlog_read(struct file *file, char __user *buf,
+			    size_t count, loff_t *ppos)
+{
+        struct inode * inode = file->f_dentry->d_inode;
+	struct proc_dir_entry *dp;
+	unsigned int *data;
+	int status;
+	unsigned long len, off;
+	unsigned int wait_time;
+
+        dp = PDE(inode);
+ 	data = (unsigned int *)dp->data;
+
+	if (!data) {
+		printk(KERN_ERR "scanlog: read failed no data\n");
+		return -EIO;
+	}
+
+	if (count > RTAS_DATA_BUF_SIZE)
+		count = RTAS_DATA_BUF_SIZE;
+
+	if (count < 1024) {
+		/* This is the min supported by this RTAS call.  Rather
+		 * than do all the buffering we insist the user code handle
+		 * larger reads.  As long as cp works... :)
+		 */
+		printk(KERN_ERR "scanlog: cannot perform a small read (%ld)\n", count);
+		return -EINVAL;
+	}
+
+	if (!access_ok(VERIFY_WRITE, buf, count))
+		return -EFAULT;
+
+	for (;;) {
+		wait_time = 500;	/* default wait if no data */
+		spin_lock(&rtas_data_buf_lock);
+		memcpy(rtas_data_buf, data, RTAS_DATA_BUF_SIZE);
+		status = rtas_call(ibm_scan_log_dump, 2, 1, NULL,
+				   (u32) __pa(rtas_data_buf), (u32) count);
+		memcpy(data, rtas_data_buf, RTAS_DATA_BUF_SIZE);
+		spin_unlock(&rtas_data_buf_lock);
+
+		DEBUG("status=%d, data[0]=%x, data[1]=%x, data[2]=%x\n",
+		      status, data[0], data[1], data[2]);
+		switch (status) {
+		    case SCANLOG_COMPLETE:
+			DEBUG("hit eof\n");
+			return 0;
+		    case SCANLOG_HWERROR:
+			DEBUG("hardware error reading scan log data\n");
+			return -EIO;
+		    case SCANLOG_CONTINUE:
+			/* We may or may not have data yet */
+			len = data[1];
+			off = data[2];
+			if (len > 0) {
+				if (copy_to_user(buf, ((char *)data)+off, len))
+					return -EFAULT;
+				return len;
+			}
+			/* Break to sleep default time */
+			break;
+		    default:
+			if (status > 9900 && status <= 9905) {
+				wait_time = rtas_extended_busy_delay_time(status);
+			} else {
+				printk(KERN_ERR "scanlog: unknown error from rtas: %d\n", status);
+				return -EIO;
+			}
+		}
+		/* Apparently no data yet.  Wait and try again. */
+		msleep_interruptible(wait_time);
+	}
+	/*NOTREACHED*/
+}
+
+static ssize_t scanlog_write(struct file * file, const char __user * buf,
+			     size_t count, loff_t *ppos)
+{
+	char stkbuf[20];
+	int status;
+
+	if (count > 19) count = 19;
+	if (copy_from_user (stkbuf, buf, count)) {
+		return -EFAULT;
+	}
+	stkbuf[count] = 0;
+
+	if (buf) {
+		if (strncmp(stkbuf, "reset", 5) == 0) {
+			DEBUG("reset scanlog\n");
+			status = rtas_call(ibm_scan_log_dump, 2, 1, NULL, 0, 0);
+			DEBUG("rtas returns %d\n", status);
+		} else if (strncmp(stkbuf, "debugon", 7) == 0) {
+			printk(KERN_ERR "scanlog: debug on\n");
+			scanlog_debug = 1;
+		} else if (strncmp(stkbuf, "debugoff", 8) == 0) {
+			printk(KERN_ERR "scanlog: debug off\n");
+			scanlog_debug = 0;
+		}
+	}
+	return count;
+}
+
+static int scanlog_open(struct inode * inode, struct file * file)
+{
+	struct proc_dir_entry *dp = PDE(inode);
+	unsigned int *data = (unsigned int *)dp->data;
+
+	if (!data) {
+		printk(KERN_ERR "scanlog: open failed no data\n");
+		return -EIO;
+	}
+
+	if (data[0] != 0) {
+		/* This imperfect test stops a second copy of the
+		 * data (or a reset while data is being copied)
+		 */
+		return -EBUSY;
+	}
+
+	data[0] = 0;	/* re-init so we restart the scan */
+
+	return 0;
+}
+
+static int scanlog_release(struct inode * inode, struct file * file)
+{
+	struct proc_dir_entry *dp = PDE(inode);
+	unsigned int *data = (unsigned int *)dp->data;
+
+	if (!data) {
+		printk(KERN_ERR "scanlog: release failed no data\n");
+		return -EIO;
+	}
+	data[0] = 0;
+
+	return 0;
+}
+
+struct file_operations scanlog_fops = {
+	.owner		= THIS_MODULE,
+	.read		= scanlog_read,
+	.write		= scanlog_write,
+	.open		= scanlog_open,
+	.release	= scanlog_release,
+};
+
+int __init scanlog_init(void)
+{
+	struct proc_dir_entry *ent;
+
+	ibm_scan_log_dump = rtas_token("ibm,scan-log-dump");
+	if (ibm_scan_log_dump == RTAS_UNKNOWN_SERVICE) {
+		printk(KERN_ERR "scan-log-dump not implemented on this system\n");
+		return -EIO;
+	}
+
+        ent = create_proc_entry("ppc64/rtas/scan-log-dump",  S_IRUSR, NULL);
+	if (ent) {
+		ent->proc_fops = &scanlog_fops;
+		/* Ideally we could allocate a buffer < 4G */
+		ent->data = kmalloc(RTAS_DATA_BUF_SIZE, GFP_KERNEL);
+		if (!ent->data) {
+			printk(KERN_ERR "Failed to allocate a buffer\n");
+			remove_proc_entry("scan-log-dump", ent->parent);
+			return -ENOMEM;
+		}
+		((unsigned int *)ent->data)[0] = 0;
+	} else {
+		printk(KERN_ERR "Failed to create ppc64/scan-log-dump proc entry\n");
+		return -EIO;
+	}
+	proc_ppc64_scan_log_dump = ent;
+
+	return 0;
+}
+
+void __exit scanlog_cleanup(void)
+{
+	if (proc_ppc64_scan_log_dump) {
+		kfree(proc_ppc64_scan_log_dump->data);
+		remove_proc_entry("scan-log-dump", proc_ppc64_scan_log_dump->parent);
+	}
+}
+
+module_init(scanlog_init);
+module_exit(scanlog_cleanup);
+MODULE_LICENSE("GPL");
-- 
cgit v1.1


From 3ddfbcf19b15ccd25a0b4b2dc2e38000e08de739 Mon Sep 17 00:00:00 2001
From: David Gibson <david@gibson.dropbear.id.au>
Date: Thu, 10 Nov 2005 12:56:55 +1100
Subject: [PATCH] powerpc: Consolidate asm compatibility macros

This patch consolidates macros used to generate assembly for
compatibility across different CPUs or configs.  A new header,
asm-powerpc/asm-compat.h contains the main compatibility macros.  It
uses some preprocessor magic to make the macros suitable both for use
in .S files, and in inline asm in .c files.  Headers (bitops.h,
uaccess.h, atomic.h, bug.h) which had their own such compatibility
macros are changed to use asm-compat.h.

ppc_asm.h is now for use in .S files *only*, and a #error enforces
that.  As such, we're a lot more careless about namespace pollution
here than in asm-compat.h.

While we're at it, this patch adds a call to the PPC405_ERR77 macro in
futex.h which should have had it already, but didn't.

Built and booted on pSeries, Maple and iSeries (ARCH=powerpc).  Built
for 32-bit powermac (ARCH=powerpc) and Walnut (ARCH=ppc).

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/kernel/fpu.S             |  24 ++---
 arch/powerpc/platforms/iseries/misc.S |   1 +
 arch/powerpc/xmon/setjmp.S            | 176 +++++++++++++++++-----------------
 3 files changed, 101 insertions(+), 100 deletions(-)

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/kernel/fpu.S b/arch/powerpc/kernel/fpu.S
index 4d6001f..b780b42 100644
--- a/arch/powerpc/kernel/fpu.S
+++ b/arch/powerpc/kernel/fpu.S
@@ -41,20 +41,20 @@ _GLOBAL(load_up_fpu)
 #ifndef CONFIG_SMP
 	LOADBASE(r3, last_task_used_math)
 	toreal(r3)
-	LDL	r4,OFF(last_task_used_math)(r3)
-	CMPI	0,r4,0
+	PPC_LL	r4,OFF(last_task_used_math)(r3)
+	PPC_LCMPI	0,r4,0
 	beq	1f
 	toreal(r4)
 	addi	r4,r4,THREAD		/* want last_task_used_math->thread */
 	SAVE_32FPRS(0, r4)
 	mffs	fr0
 	stfd	fr0,THREAD_FPSCR(r4)
-	LDL	r5,PT_REGS(r4)
+	PPC_LL	r5,PT_REGS(r4)
 	toreal(r5)
-	LDL	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+	PPC_LL	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
 	li	r10,MSR_FP|MSR_FE0|MSR_FE1
 	andc	r4,r4,r10		/* disable FP for previous task */
-	STL	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+	PPC_STL	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
 1:
 #endif /* CONFIG_SMP */
 	/* enable use of FP after return */
@@ -77,7 +77,7 @@ _GLOBAL(load_up_fpu)
 #ifndef CONFIG_SMP
 	subi	r4,r5,THREAD
 	fromreal(r4)
-	STL	r4,OFF(last_task_used_math)(r3)
+	PPC_STL	r4,OFF(last_task_used_math)(r3)
 #endif /* CONFIG_SMP */
 	/* restore registers and return */
 	/* we haven't used ctr or xer or lr */
@@ -97,24 +97,24 @@ _GLOBAL(giveup_fpu)
 	MTMSRD(r5)			/* enable use of fpu now */
 	SYNC_601
 	isync
-	CMPI	0,r3,0
+	PPC_LCMPI	0,r3,0
 	beqlr-				/* if no previous owner, done */
 	addi	r3,r3,THREAD	        /* want THREAD of task */
-	LDL	r5,PT_REGS(r3)
-	CMPI	0,r5,0
+	PPC_LL	r5,PT_REGS(r3)
+	PPC_LCMPI	0,r5,0
 	SAVE_32FPRS(0, r3)
 	mffs	fr0
 	stfd	fr0,THREAD_FPSCR(r3)
 	beq	1f
-	LDL	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+	PPC_LL	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
 	li	r3,MSR_FP|MSR_FE0|MSR_FE1
 	andc	r4,r4,r3		/* disable FP for previous task */
-	STL	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+	PPC_STL	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
 1:
 #ifndef CONFIG_SMP
 	li	r5,0
 	LOADBASE(r4,last_task_used_math)
-	STL	r5,OFF(last_task_used_math)(r4)
+	PPC_STL	r5,OFF(last_task_used_math)(r4)
 #endif /* CONFIG_SMP */
 	blr
 
diff --git a/arch/powerpc/platforms/iseries/misc.S b/arch/powerpc/platforms/iseries/misc.S
index 09f1452..dfe7aa1 100644
--- a/arch/powerpc/platforms/iseries/misc.S
+++ b/arch/powerpc/platforms/iseries/misc.S
@@ -15,6 +15,7 @@
 
 #include <asm/processor.h>
 #include <asm/asm-offsets.h>
+#include <asm/ppc_asm.h>
 
 	.text
 
diff --git a/arch/powerpc/xmon/setjmp.S b/arch/powerpc/xmon/setjmp.S
index f8e40df..96a91f1 100644
--- a/arch/powerpc/xmon/setjmp.S
+++ b/arch/powerpc/xmon/setjmp.S
@@ -14,61 +14,61 @@
 
 _GLOBAL(xmon_setjmp)
 	mflr	r0
-	STL	r0,0(r3)
-	STL	r1,SZL(r3)
-	STL	r2,2*SZL(r3)
+	PPC_STL	r0,0(r3)
+	PPC_STL	r1,SZL(r3)
+	PPC_STL	r2,2*SZL(r3)
 	mfcr	r0
-	STL	r0,3*SZL(r3)
-	STL	r13,4*SZL(r3)
-	STL	r14,5*SZL(r3)
-	STL	r15,6*SZL(r3)
-	STL	r16,7*SZL(r3)
-	STL	r17,8*SZL(r3)
-	STL	r18,9*SZL(r3)
-	STL	r19,10*SZL(r3)
-	STL	r20,11*SZL(r3)
-	STL	r21,12*SZL(r3)
-	STL	r22,13*SZL(r3)
-	STL	r23,14*SZL(r3)
-	STL	r24,15*SZL(r3)
-	STL	r25,16*SZL(r3)
-	STL	r26,17*SZL(r3)
-	STL	r27,18*SZL(r3)
-	STL	r28,19*SZL(r3)
-	STL	r29,20*SZL(r3)
-	STL	r30,21*SZL(r3)
-	STL	r31,22*SZL(r3)
+	PPC_STL	r0,3*SZL(r3)
+	PPC_STL	r13,4*SZL(r3)
+	PPC_STL	r14,5*SZL(r3)
+	PPC_STL	r15,6*SZL(r3)
+	PPC_STL	r16,7*SZL(r3)
+	PPC_STL	r17,8*SZL(r3)
+	PPC_STL	r18,9*SZL(r3)
+	PPC_STL	r19,10*SZL(r3)
+	PPC_STL	r20,11*SZL(r3)
+	PPC_STL	r21,12*SZL(r3)
+	PPC_STL	r22,13*SZL(r3)
+	PPC_STL	r23,14*SZL(r3)
+	PPC_STL	r24,15*SZL(r3)
+	PPC_STL	r25,16*SZL(r3)
+	PPC_STL	r26,17*SZL(r3)
+	PPC_STL	r27,18*SZL(r3)
+	PPC_STL	r28,19*SZL(r3)
+	PPC_STL	r29,20*SZL(r3)
+	PPC_STL	r30,21*SZL(r3)
+	PPC_STL	r31,22*SZL(r3)
 	li	r3,0
 	blr
 
 _GLOBAL(xmon_longjmp)
-	CMPI	r4,0
+	PPC_LCMPI r4,0
 	bne	1f
 	li	r4,1
-1:	LDL	r13,4*SZL(r3)
-	LDL	r14,5*SZL(r3)
-	LDL	r15,6*SZL(r3)
-	LDL	r16,7*SZL(r3)
-	LDL	r17,8*SZL(r3)
-	LDL	r18,9*SZL(r3)
-	LDL	r19,10*SZL(r3)
-	LDL	r20,11*SZL(r3)
-	LDL	r21,12*SZL(r3)
-	LDL	r22,13*SZL(r3)
-	LDL	r23,14*SZL(r3)
-	LDL	r24,15*SZL(r3)
-	LDL	r25,16*SZL(r3)
-	LDL	r26,17*SZL(r3)
-	LDL	r27,18*SZL(r3)
-	LDL	r28,19*SZL(r3)
-	LDL	r29,20*SZL(r3)
-	LDL	r30,21*SZL(r3)
-	LDL	r31,22*SZL(r3)
-	LDL	r0,3*SZL(r3)
+1:	PPC_LL	r13,4*SZL(r3)
+	PPC_LL	r14,5*SZL(r3)
+	PPC_LL	r15,6*SZL(r3)
+	PPC_LL	r16,7*SZL(r3)
+	PPC_LL	r17,8*SZL(r3)
+	PPC_LL	r18,9*SZL(r3)
+	PPC_LL	r19,10*SZL(r3)
+	PPC_LL	r20,11*SZL(r3)
+	PPC_LL	r21,12*SZL(r3)
+	PPC_LL	r22,13*SZL(r3)
+	PPC_LL	r23,14*SZL(r3)
+	PPC_LL	r24,15*SZL(r3)
+	PPC_LL	r25,16*SZL(r3)
+	PPC_LL	r26,17*SZL(r3)
+	PPC_LL	r27,18*SZL(r3)
+	PPC_LL	r28,19*SZL(r3)
+	PPC_LL	r29,20*SZL(r3)
+	PPC_LL	r30,21*SZL(r3)
+	PPC_LL	r31,22*SZL(r3)
+	PPC_LL	r0,3*SZL(r3)
 	mtcrf	0x38,r0
-	LDL	r0,0(r3)
-	LDL	r1,SZL(r3)
-	LDL	r2,2*SZL(r3)
+	PPC_LL	r0,0(r3)
+	PPC_LL	r1,SZL(r3)
+	PPC_LL	r2,2*SZL(r3)
 	mtlr	r0
 	mr	r3,r4
 	blr
@@ -84,52 +84,52 @@ _GLOBAL(xmon_longjmp)
  * different ABIs, though).
  */
 _GLOBAL(xmon_save_regs)
-	STL	r0,0*SZL(r3)
-	STL	r2,2*SZL(r3)
-	STL	r3,3*SZL(r3)
-	STL	r4,4*SZL(r3)
-	STL	r5,5*SZL(r3)
-	STL	r6,6*SZL(r3)
-	STL	r7,7*SZL(r3)
-	STL	r8,8*SZL(r3)
-	STL	r9,9*SZL(r3)
-	STL	r10,10*SZL(r3)
-	STL	r11,11*SZL(r3)
-	STL	r12,12*SZL(r3)
-	STL	r13,13*SZL(r3)
-	STL	r14,14*SZL(r3)
-	STL	r15,15*SZL(r3)
-	STL	r16,16*SZL(r3)
-	STL	r17,17*SZL(r3)
-	STL	r18,18*SZL(r3)
-	STL	r19,19*SZL(r3)
-	STL	r20,20*SZL(r3)
-	STL	r21,21*SZL(r3)
-	STL	r22,22*SZL(r3)
-	STL	r23,23*SZL(r3)
-	STL	r24,24*SZL(r3)
-	STL	r25,25*SZL(r3)
-	STL	r26,26*SZL(r3)
-	STL	r27,27*SZL(r3)
-	STL	r28,28*SZL(r3)
-	STL	r29,29*SZL(r3)
-	STL	r30,30*SZL(r3)
-	STL	r31,31*SZL(r3)
+	PPC_STL	r0,0*SZL(r3)
+	PPC_STL	r2,2*SZL(r3)
+	PPC_STL	r3,3*SZL(r3)
+	PPC_STL	r4,4*SZL(r3)
+	PPC_STL	r5,5*SZL(r3)
+	PPC_STL	r6,6*SZL(r3)
+	PPC_STL	r7,7*SZL(r3)
+	PPC_STL	r8,8*SZL(r3)
+	PPC_STL	r9,9*SZL(r3)
+	PPC_STL	r10,10*SZL(r3)
+	PPC_STL	r11,11*SZL(r3)
+	PPC_STL	r12,12*SZL(r3)
+	PPC_STL	r13,13*SZL(r3)
+	PPC_STL	r14,14*SZL(r3)
+	PPC_STL	r15,15*SZL(r3)
+	PPC_STL	r16,16*SZL(r3)
+	PPC_STL	r17,17*SZL(r3)
+	PPC_STL	r18,18*SZL(r3)
+	PPC_STL	r19,19*SZL(r3)
+	PPC_STL	r20,20*SZL(r3)
+	PPC_STL	r21,21*SZL(r3)
+	PPC_STL	r22,22*SZL(r3)
+	PPC_STL	r23,23*SZL(r3)
+	PPC_STL	r24,24*SZL(r3)
+	PPC_STL	r25,25*SZL(r3)
+	PPC_STL	r26,26*SZL(r3)
+	PPC_STL	r27,27*SZL(r3)
+	PPC_STL	r28,28*SZL(r3)
+	PPC_STL	r29,29*SZL(r3)
+	PPC_STL	r30,30*SZL(r3)
+	PPC_STL	r31,31*SZL(r3)
 	/* go up one stack frame for SP */
-	LDL	r4,0(r1)
-	STL	r4,1*SZL(r3)
+	PPC_LL	r4,0(r1)
+	PPC_STL	r4,1*SZL(r3)
 	/* get caller's LR */
-	LDL	r0,LRSAVE(r4)
-	STL	r0,_NIP-STACK_FRAME_OVERHEAD(r3)
-	STL	r0,_LINK-STACK_FRAME_OVERHEAD(r3)
+	PPC_LL	r0,LRSAVE(r4)
+	PPC_STL	r0,_NIP-STACK_FRAME_OVERHEAD(r3)
+	PPC_STL	r0,_LINK-STACK_FRAME_OVERHEAD(r3)
 	mfmsr	r0
-	STL	r0,_MSR-STACK_FRAME_OVERHEAD(r3)
+	PPC_STL	r0,_MSR-STACK_FRAME_OVERHEAD(r3)
 	mfctr	r0
-	STL	r0,_CTR-STACK_FRAME_OVERHEAD(r3)
+	PPC_STL	r0,_CTR-STACK_FRAME_OVERHEAD(r3)
 	mfxer	r0
-	STL	r0,_XER-STACK_FRAME_OVERHEAD(r3)
+	PPC_STL	r0,_XER-STACK_FRAME_OVERHEAD(r3)
 	mfcr	r0
-	STL	r0,_CCR-STACK_FRAME_OVERHEAD(r3)
+	PPC_STL	r0,_CCR-STACK_FRAME_OVERHEAD(r3)
 	li	r0,0
-	STL	r0,_TRAP-STACK_FRAME_OVERHEAD(r3)
+	PPC_STL	r0,_TRAP-STACK_FRAME_OVERHEAD(r3)
 	blr
-- 
cgit v1.1


From 799d6046d3fb557006e6d7c9767fdb96479b0e0a Mon Sep 17 00:00:00 2001
From: Paul Mackerras <paulus@samba.org>
Date: Thu, 10 Nov 2005 13:37:51 +1100
Subject: [PATCH] powerpc: merge code values for identifying platforms

This patch merges platform codes.  systemcfg->platform is no longer used,
systemcfg use in general is deprecated as much as possible (and renamed
_systemcfg before it gets completely moved elsewhere in a future patch),
_machine is now used on ppc64 along as ppc32.  Platform codes aren't gone
yet but we are getting a step closer. A bunch of asm code in head[_64].S
is also turned into C code.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/kernel/asm-offsets.c         |  1 -
 arch/powerpc/kernel/head_64.S             | 91 +++----------------------------
 arch/powerpc/kernel/paca.c                |  5 +-
 arch/powerpc/kernel/ppc_ksyms.c           |  3 -
 arch/powerpc/kernel/prom.c                | 16 ++----
 arch/powerpc/kernel/prom_init.c           |  8 +--
 arch/powerpc/kernel/rtas-proc.c           |  2 +-
 arch/powerpc/kernel/rtas.c                |  5 +-
 arch/powerpc/kernel/setup-common.c        | 12 +++-
 arch/powerpc/kernel/setup_32.c            |  2 -
 arch/powerpc/kernel/setup_64.c            | 65 +++++++++++++++-------
 arch/powerpc/kernel/smp.c                 |  5 +-
 arch/powerpc/kernel/sys_ppc32.c           |  1 -
 arch/powerpc/kernel/time.c                | 29 +++++-----
 arch/powerpc/kernel/traps.c               |  2 +-
 arch/powerpc/mm/hash_utils_64.c           | 29 +++++++---
 arch/powerpc/mm/stab.c                    | 21 ++++++-
 arch/powerpc/oprofile/op_model_power4.c   |  3 +-
 arch/powerpc/platforms/iseries/setup.c    | 23 +++++---
 arch/powerpc/platforms/pseries/eeh.c      |  3 +-
 arch/powerpc/platforms/pseries/iommu.c    |  3 +-
 arch/powerpc/platforms/pseries/pci.c      |  2 +-
 arch/powerpc/platforms/pseries/reconfig.c |  2 +-
 arch/powerpc/platforms/pseries/rtasd.c    |  8 ++-
 arch/powerpc/platforms/pseries/setup.c    |  8 +--
 arch/powerpc/platforms/pseries/smp.c      |  5 +-
 arch/powerpc/platforms/pseries/xics.c     |  6 +-
 27 files changed, 165 insertions(+), 195 deletions(-)

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index b757572..8793102 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -106,7 +106,6 @@ int main(void)
 	DEFINE(ICACHEL1LINESIZE, offsetof(struct ppc64_caches, iline_size));
 	DEFINE(ICACHEL1LOGLINESIZE, offsetof(struct ppc64_caches, log_iline_size));
 	DEFINE(ICACHEL1LINESPERPAGE, offsetof(struct ppc64_caches, ilines_per_page));
-	DEFINE(PLATFORM, offsetof(struct systemcfg, platform));
 	DEFINE(PLATFORM_LPAR, PLATFORM_LPAR);
 
 	/* paca */
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 16ab40d..8a8bf79 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -28,7 +28,6 @@
 #include <asm/reg.h>
 #include <asm/page.h>
 #include <asm/mmu.h>
-#include <asm/systemcfg.h>
 #include <asm/ppc_asm.h>
 #include <asm/asm-offsets.h>
 #include <asm/bug.h>
@@ -1697,25 +1696,14 @@ _GLOBAL(pmac_secondary_start)
  *   SPRG3 = paca virtual address
  */
 _GLOBAL(__secondary_start)
+	/* Set thread priority to MEDIUM */
+	HMT_MEDIUM
 
-	HMT_MEDIUM			/* Set thread priority to MEDIUM */
-
+	/* Load TOC */
 	ld	r2,PACATOC(r13)
-	li	r6,0
-	stb	r6,PACAPROCENABLED(r13)
-
-#ifndef CONFIG_PPC_ISERIES
-	/* Initialize the page table pointer register. */
-	LOADADDR(r6,_SDR1)
-	ld	r6,0(r6)		/* get the value of _SDR1	 */
-	mtspr	SPRN_SDR1,r6			/* set the htab location	 */
-#endif
-	/* Initialize the first segment table (or SLB) entry		 */
-	ld	r3,PACASTABVIRT(r13)	/* get addr of segment table	 */
-BEGIN_FTR_SECTION
-	bl	.stab_initialize
-END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
-	bl	.slb_initialize
+
+	/* Do early setup for that CPU (stab, slb, hash table pointer) */
+	bl	.early_setup_secondary
 
 	/* Initialize the kernel stack.  Just a repeat for iSeries.	 */
 	LOADADDR(r3,current_set)
@@ -1724,37 +1712,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
 	addi	r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD
 	std	r1,PACAKSAVE(r13)
 
-	ld	r3,PACASTABREAL(r13)	/* get raddr of segment table	 */
-	ori	r4,r3,1			/* turn on valid bit		 */
-
-#ifdef CONFIG_PPC_ISERIES
-	li	r0,-1			/* hypervisor call */
-	li	r3,1
-	sldi	r3,r3,63		/* 0x8000000000000000 */
-	ori	r3,r3,4			/* 0x8000000000000004 */
-	sc				/* HvCall_setASR */
-#else
-	/* set the ASR */
-	ld	r3,systemcfg@got(r2)	/* r3 = ptr to systemcfg	 */
-	ld	r3,0(r3)
-	lwz	r3,PLATFORM(r3)		/* r3 = platform flags		 */
-	andi.	r3,r3,PLATFORM_LPAR	/* Test if bit 0 is set (LPAR bit) */
-	beq	98f			/* branch if result is 0  */
-	mfspr	r3,SPRN_PVR
-	srwi	r3,r3,16
-	cmpwi	r3,0x37			/* SStar  */
-	beq	97f
-	cmpwi	r3,0x36			/* IStar  */
-	beq	97f
-	cmpwi	r3,0x34			/* Pulsar */
-	bne	98f
-97:	li	r3,H_SET_ASR		/* hcall = H_SET_ASR */
-	HVSC				/* Invoking hcall */
-	b	99f
-98:					/* !(rpa hypervisor) || !(star)  */
-	mtasr	r4			/* set the stab location	 */
-99:
-#endif
+	/* Clear backchain so we get nice backtraces */
 	li	r7,0
 	mtlr	r7
 
@@ -1777,6 +1735,7 @@ _GLOBAL(start_secondary_prolog)
 	li	r3,0
 	std	r3,0(r1)		/* Zero the stack frame pointer	*/
 	bl	.start_secondary
+	b	.
 #endif
 
 /*
@@ -1896,40 +1855,6 @@ _STATIC(start_here_multiplatform)
 	mr	r3,r31
  	bl	.early_setup
 
-	/* set the ASR */
-	ld	r3,PACASTABREAL(r13)
-	ori	r4,r3,1			/* turn on valid bit		 */
-	ld	r3,systemcfg@got(r2)	/* r3 = ptr to systemcfg */
-	ld	r3,0(r3)
-	lwz	r3,PLATFORM(r3)		/* r3 = platform flags */
-	andi.	r3,r3,PLATFORM_LPAR	/* Test if bit 0 is set (LPAR bit) */
-	beq	98f			/* branch if result is 0  */
-	mfspr	r3,SPRN_PVR
-	srwi	r3,r3,16
-	cmpwi	r3,0x37			/* SStar */
-	beq	97f
-	cmpwi	r3,0x36			/* IStar  */
-	beq	97f
-	cmpwi	r3,0x34			/* Pulsar */
-	bne	98f
-97:	li	r3,H_SET_ASR		/* hcall = H_SET_ASR */
-	HVSC				/* Invoking hcall */
-	b	99f
-98:					/* !(rpa hypervisor) || !(star) */
-	mtasr	r4			/* set the stab location	*/
-99:
-	/* Set SDR1 (hash table pointer) */
-	ld	r3,systemcfg@got(r2)	/* r3 = ptr to systemcfg */
-	ld	r3,0(r3)
-	lwz	r3,PLATFORM(r3)		/* r3 = platform flags */
-	/* Test if bit 0 is set (LPAR bit) */
-	andi.	r3,r3,PLATFORM_LPAR
-	bne	98f			/* branch if result is !0  */
-	LOADADDR(r6,_SDR1)		/* Only if NOT LPAR */
-	add	r6,r6,r26
-	ld	r6,0(r6)		/* get the value of _SDR1 */
-	mtspr	SPRN_SDR1,r6			/* set the htab location  */
-98: 
 	LOADADDR(r3,.start_here_common)
 	SET_REG_TO_CONST(r4, MSR_KERNEL)
 	mtspr	SPRN_SRR0,r3
diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c
index 179948e..3cf2517 100644
--- a/arch/powerpc/kernel/paca.c
+++ b/arch/powerpc/kernel/paca.c
@@ -15,7 +15,7 @@
 #include <asm/processor.h>
 #include <asm/ptrace.h>
 #include <asm/page.h>
-
+#include <asm/systemcfg.h>
 #include <asm/lppaca.h>
 #include <asm/iseries/it_lp_queue.h>
 #include <asm/paca.h>
@@ -24,8 +24,7 @@ static union {
 	struct systemcfg	data;
 	u8			page[PAGE_SIZE];
 } systemcfg_store __attribute__((__section__(".data.page.aligned")));
-struct systemcfg *systemcfg = &systemcfg_store.data;
-EXPORT_SYMBOL(systemcfg);
+struct systemcfg *_systemcfg = &systemcfg_store.data;
 
 
 /* This symbol is provided by the linker - let it fill in the paca
diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c
index 5d9fd03..5dcf4ba 100644
--- a/arch/powerpc/kernel/ppc_ksyms.c
+++ b/arch/powerpc/kernel/ppc_ksyms.c
@@ -188,9 +188,6 @@ EXPORT_SYMBOL(adb_try_handler_change);
 EXPORT_SYMBOL(cuda_request);
 EXPORT_SYMBOL(cuda_poll);
 #endif /* CONFIG_ADB_CUDA */
-#if defined(CONFIG_PPC_MULTIPLATFORM) && defined(CONFIG_PPC32)
-EXPORT_SYMBOL(_machine);
-#endif
 #ifdef CONFIG_PPC_PMAC
 EXPORT_SYMBOL(sys_ctrler);
 #endif
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 5af39f8..1bf3642 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -48,9 +48,6 @@
 #include <asm/machdep.h>
 #include <asm/pSeries_reconfig.h>
 #include <asm/pci-bridge.h>
-#ifdef CONFIG_PPC64
-#include <asm/systemcfg.h>
-#endif
 
 #ifdef DEBUG
 #define DBG(fmt...) printk(KERN_ERR fmt)
@@ -391,7 +388,7 @@ static int __devinit finish_node_interrupts(struct device_node *np,
 
 #ifdef CONFIG_PPC64
 		/* We offset irq numbers for the u3 MPIC by 128 in PowerMac */
-		if (systemcfg->platform == PLATFORM_POWERMAC && ic && ic->parent) {
+		if (_machine == PLATFORM_POWERMAC && ic && ic->parent) {
 			char *name = get_property(ic->parent, "name", NULL);
 			if (name && !strcmp(name, "u3"))
 				np->intrs[intrcount].line += 128;
@@ -1161,13 +1158,9 @@ static int __init early_init_dt_scan_chosen(unsigned long node,
 	prop = (u32 *)of_get_flat_dt_prop(node, "linux,platform", NULL);
 	if (prop == NULL)
 		return 0;
-#ifdef CONFIG_PPC64
-	systemcfg->platform = *prop;
-#else
 #ifdef CONFIG_PPC_MULTIPLATFORM
 	_machine = *prop;
 #endif
-#endif
 
 #ifdef CONFIG_PPC64
 	/* check if iommu is forced on or off */
@@ -1346,9 +1339,6 @@ void __init early_init_devtree(void *params)
 	of_scan_flat_dt(early_init_dt_scan_memory, NULL);
 	lmb_enforce_memory_limit(memory_limit);
 	lmb_analyze();
-#ifdef CONFIG_PPC64
-	systemcfg->physicalMemorySize = lmb_phys_mem_size();
-#endif
 	lmb_reserve(0, __pa(klimit));
 
 	DBG("Phys. mem: %lx\n", lmb_phys_mem_size());
@@ -1915,7 +1905,7 @@ static int of_finish_dynamic_node(struct device_node *node,
 	/* We don't support that function on PowerMac, at least
 	 * not yet
 	 */
-	if (systemcfg->platform == PLATFORM_POWERMAC)
+	if (_machine == PLATFORM_POWERMAC)
 		return -ENODEV;
 
 	/* fix up new node's linux_phandle field */
@@ -1999,9 +1989,11 @@ int prom_add_property(struct device_node* np, struct property* prop)
 	*next = prop;
 	write_unlock(&devtree_lock);
 
+#ifdef CONFIG_PROC_DEVICETREE
 	/* try to add to proc as well if it was initialized */
 	if (np->pde)
 		proc_device_tree_add_prop(np->pde, prop);
+#endif /* CONFIG_PROC_DEVICETREE */
 
 	return 0;
 }
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 09db1bb..4ce0105 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -117,11 +117,6 @@ int of_workarounds;
 #define prom_debug(x...)
 #endif
 
-#ifdef CONFIG_PPC32
-#define PLATFORM_POWERMAC	_MACH_Pmac
-#define PLATFORM_CHRP		_MACH_chrp
-#endif
-
 
 typedef u32 prom_arg_t;
 
@@ -2078,7 +2073,8 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4,
 	/*
 	 * On pSeries, inform the firmware about our capabilities
 	 */
-	if (RELOC(of_platform) & PLATFORM_PSERIES)
+	if (RELOC(of_platform) == PLATFORM_PSERIES ||
+	    RELOC(of_platform) == PLATFORM_PSERIES_LPAR)
 		prom_send_capabilities();
 #endif
 
diff --git a/arch/powerpc/kernel/rtas-proc.c b/arch/powerpc/kernel/rtas-proc.c
index 5bdd5b0..ae1a364 100644
--- a/arch/powerpc/kernel/rtas-proc.c
+++ b/arch/powerpc/kernel/rtas-proc.c
@@ -259,7 +259,7 @@ static int __init proc_rtas_init(void)
 {
 	struct proc_dir_entry *entry;
 
-	if (!(systemcfg->platform & PLATFORM_PSERIES))
+	if (_machine != PLATFORM_PSERIES && _machine != PLATFORM_PSERIES_LPAR)
 		return 1;
 
 	rtas_node = of_find_node_by_name(NULL, "rtas");
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index 9d4e07f..4283fa3 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -29,9 +29,6 @@
 #include <asm/delay.h>
 #include <asm/uaccess.h>
 #include <asm/lmb.h>
-#ifdef CONFIG_PPC64
-#include <asm/systemcfg.h>
-#endif
 
 struct rtas_t rtas = {
 	.lock = SPIN_LOCK_UNLOCKED
@@ -671,7 +668,7 @@ void __init rtas_initialize(void)
 	 * the stop-self token if any
 	 */
 #ifdef CONFIG_PPC64
-	if (systemcfg->platform == PLATFORM_PSERIES_LPAR)
+	if (_machine == PLATFORM_PSERIES_LPAR)
 		rtas_region = min(lmb.rmo_size, RTAS_INSTANTIATE_MAX);
 #endif
 	rtas_rmo_buf = lmb_alloc_base(RTAS_RMOBUF_MAX, PAGE_SIZE, rtas_region);
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 17c46a2..06e4ef2 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -33,6 +33,7 @@
 #include <asm/io.h>
 #include <asm/prom.h>
 #include <asm/processor.h>
+#include <asm/systemcfg.h>
 #include <asm/pgtable.h>
 #include <asm/smp.h>
 #include <asm/elf.h>
@@ -63,6 +64,11 @@
 #define DBG(fmt...)
 #endif
 
+#ifdef CONFIG_PPC_MULTIPLATFORM
+int _machine = 0;
+EXPORT_SYMBOL(_machine);
+#endif
+
 /*
  * This still seems to be needed... -- paulus
  */ 
@@ -513,8 +519,8 @@ void __init smp_setup_cpu_maps(void)
 	 * On pSeries LPAR, we need to know how many cpus
 	 * could possibly be added to this partition.
 	 */
-	if (systemcfg->platform == PLATFORM_PSERIES_LPAR &&
-				(dn = of_find_node_by_path("/rtas"))) {
+	if (_machine == PLATFORM_PSERIES_LPAR &&
+	    (dn = of_find_node_by_path("/rtas"))) {
 		int num_addr_cell, num_size_cell, maxcpus;
 		unsigned int *ireg;
 
@@ -558,7 +564,7 @@ void __init smp_setup_cpu_maps(void)
 			cpu_set(cpu ^ 0x1, cpu_sibling_map[cpu]);
 	}
 
-	systemcfg->processorCount = num_present_cpus();
+	_systemcfg->processorCount = num_present_cpus();
 #endif /* CONFIG_PPC64 */
 }
 #endif /* CONFIG_SMP */
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index 55f485f..f73d768 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -72,8 +72,6 @@ unsigned int DMA_MODE_WRITE;
 int have_of = 1;
 
 #ifdef CONFIG_PPC_MULTIPLATFORM
-int _machine = 0;
-
 extern void prep_init(void);
 extern void pmac_init(void);
 extern void chrp_init(void);
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index fe39aac..be607b8 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -100,10 +100,9 @@ extern void udbg_init_maple_realmode(void);
 extern unsigned long klimit;
 
 extern void mm_init_ppc64(void);
-extern void stab_initialize(unsigned long stab);
-extern void htab_initialize(void);
 extern void early_init_devtree(void *flat_dt);
 extern void unflatten_device_tree(void);
+extern void check_for_initrd(void);
 
 int have_of = 1;
 int boot_cpuid = 0;
@@ -256,11 +255,10 @@ void __init early_setup(unsigned long dt_ptr)
 	 * Iterate all ppc_md structures until we find the proper
 	 * one for the current machine type
 	 */
-	DBG("Probing machine type for platform %x...\n",
-	    systemcfg->platform);
+	DBG("Probing machine type for platform %x...\n", _machine);
 
 	for (mach = machines; *mach; mach++) {
-		if ((*mach)->probe(systemcfg->platform))
+		if ((*mach)->probe(_machine))
 			break;
 	}
 	/* What can we do if we didn't find ? */
@@ -292,6 +290,28 @@ void __init early_setup(unsigned long dt_ptr)
 	DBG(" <- early_setup()\n");
 }
 
+#ifdef CONFIG_SMP
+void early_setup_secondary(void)
+{
+	struct paca_struct *lpaca = get_paca();
+
+	/* Mark enabled in PACA */
+	lpaca->proc_enabled = 0;
+
+	/* Initialize hash table for that CPU */
+	htab_initialize_secondary();
+
+	/* Initialize STAB/SLB. We use a virtual address as it works
+	 * in real mode on pSeries and we want a virutal address on
+	 * iSeries anyway
+	 */
+	if (cpu_has_feature(CPU_FTR_SLB))
+		slb_initialize();
+	else
+		stab_initialize(lpaca->stab_addr);
+}
+
+#endif /* CONFIG_SMP */
 
 #if defined(CONFIG_SMP) || defined(CONFIG_KEXEC)
 void smp_release_cpus(void)
@@ -317,7 +337,8 @@ void smp_release_cpus(void)
 #endif /* CONFIG_SMP || CONFIG_KEXEC */
 
 /*
- * Initialize some remaining members of the ppc64_caches and systemcfg structures
+ * Initialize some remaining members of the ppc64_caches and systemcfg
+ * structures
  * (at least until we get rid of them completely). This is mostly some
  * cache informations about the CPU that will be used by cache flush
  * routines and/or provided to userland
@@ -342,7 +363,7 @@ static void __init initialize_cache_info(void)
 			const char *dc, *ic;
 
 			/* Then read cache informations */
-			if (systemcfg->platform == PLATFORM_POWERMAC) {
+			if (_machine == PLATFORM_POWERMAC) {
 				dc = "d-cache-block-size";
 				ic = "i-cache-block-size";
 			} else {
@@ -362,8 +383,8 @@ static void __init initialize_cache_info(void)
 				DBG("Argh, can't find dcache properties ! "
 				    "sizep: %p, lsizep: %p\n", sizep, lsizep);
 
-			systemcfg->dcache_size = ppc64_caches.dsize = size;
-			systemcfg->dcache_line_size =
+			_systemcfg->dcache_size = ppc64_caches.dsize = size;
+			_systemcfg->dcache_line_size =
 				ppc64_caches.dline_size = lsize;
 			ppc64_caches.log_dline_size = __ilog2(lsize);
 			ppc64_caches.dlines_per_page = PAGE_SIZE / lsize;
@@ -380,8 +401,8 @@ static void __init initialize_cache_info(void)
 				DBG("Argh, can't find icache properties ! "
 				    "sizep: %p, lsizep: %p\n", sizep, lsizep);
 
-			systemcfg->icache_size = ppc64_caches.isize = size;
-			systemcfg->icache_line_size =
+			_systemcfg->icache_size = ppc64_caches.isize = size;
+			_systemcfg->icache_line_size =
 				ppc64_caches.iline_size = lsize;
 			ppc64_caches.log_iline_size = __ilog2(lsize);
 			ppc64_caches.ilines_per_page = PAGE_SIZE / lsize;
@@ -389,10 +410,12 @@ static void __init initialize_cache_info(void)
 	}
 
 	/* Add an eye catcher and the systemcfg layout version number */
-	strcpy(systemcfg->eye_catcher, "SYSTEMCFG:PPC64");
-	systemcfg->version.major = SYSTEMCFG_MAJOR;
-	systemcfg->version.minor = SYSTEMCFG_MINOR;
-	systemcfg->processor = mfspr(SPRN_PVR);
+	strcpy(_systemcfg->eye_catcher, "SYSTEMCFG:PPC64");
+	_systemcfg->version.major = SYSTEMCFG_MAJOR;
+	_systemcfg->version.minor = SYSTEMCFG_MINOR;
+	_systemcfg->processor = mfspr(SPRN_PVR);
+	_systemcfg->platform = _machine;
+	_systemcfg->physicalMemorySize = lmb_phys_mem_size();
 
 	DBG(" <- initialize_cache_info()\n");
 }
@@ -481,10 +504,10 @@ void __init setup_system(void)
 	printk("-----------------------------------------------------\n");
 	printk("ppc64_pft_size                = 0x%lx\n", ppc64_pft_size);
 	printk("ppc64_interrupt_controller    = 0x%ld\n", ppc64_interrupt_controller);
-	printk("systemcfg                     = 0x%p\n", systemcfg);
-	printk("systemcfg->platform           = 0x%x\n", systemcfg->platform);
-	printk("systemcfg->processorCount     = 0x%lx\n", systemcfg->processorCount);
-	printk("systemcfg->physicalMemorySize = 0x%lx\n", systemcfg->physicalMemorySize);
+	printk("systemcfg                     = 0x%p\n", _systemcfg);
+	printk("systemcfg->platform           = 0x%x\n", _systemcfg->platform);
+	printk("systemcfg->processorCount     = 0x%lx\n", _systemcfg->processorCount);
+	printk("systemcfg->physicalMemorySize = 0x%lx\n", _systemcfg->physicalMemorySize);
 	printk("ppc64_caches.dcache_line_size = 0x%x\n",
 			ppc64_caches.dline_size);
 	printk("ppc64_caches.icache_line_size = 0x%x\n",
@@ -566,12 +589,12 @@ void __init setup_syscall_map(void)
 	for (i = 0; i < __NR_syscalls; i++) {
 		if (sys_call_table[i*2] != sys_ni_syscall) {
 			count64++;
-			systemcfg->syscall_map_64[i >> 5] |=
+			_systemcfg->syscall_map_64[i >> 5] |=
 				0x80000000UL >> (i & 0x1f);
 		}
 		if (sys_call_table[i*2+1] != sys_ni_syscall) {
 			count32++;
-			systemcfg->syscall_map_32[i >> 5] |=
+			_systemcfg->syscall_map_32[i >> 5] |=
 				0x80000000UL >> (i & 0x1f);
 		}
 	}
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 5c330c3..7fd5308 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -44,6 +44,7 @@
 #include <asm/cputable.h>
 #include <asm/system.h>
 #include <asm/mpic.h>
+#include <asm/systemcfg.h>
 #ifdef CONFIG_PPC64
 #include <asm/paca.h>
 #endif
@@ -368,7 +369,9 @@ int generic_cpu_disable(void)
 	if (cpu == boot_cpuid)
 		return -EBUSY;
 
-	systemcfg->processorCount--;
+#ifdef CONFIG_PPC64
+	_systemcfg->processorCount--;
+#endif
 	cpu_clear(cpu, cpu_online_map);
 	fixup_irqs(cpu_online_map);
 	return 0;
diff --git a/arch/powerpc/kernel/sys_ppc32.c b/arch/powerpc/kernel/sys_ppc32.c
index a8210ed..9c921d1 100644
--- a/arch/powerpc/kernel/sys_ppc32.c
+++ b/arch/powerpc/kernel/sys_ppc32.c
@@ -52,7 +52,6 @@
 #include <asm/semaphore.h>
 #include <asm/time.h>
 #include <asm/mmu_context.h>
-#include <asm/systemcfg.h>
 #include <asm/ppc-pci.h>
 
 /* readdir & getdents */
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index a6282b6..386006b 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -271,13 +271,13 @@ static inline void update_gtod(u64 new_tb_stamp, u64 new_stamp_xsec,
 	 * tb_to_xs and stamp_xsec values are consistent.  If not, then it
 	 * loops back and reads them again until this criteria is met.
 	 */
-	++(systemcfg->tb_update_count);
+	++(_systemcfg->tb_update_count);
 	smp_wmb();
-	systemcfg->tb_orig_stamp = new_tb_stamp;
-	systemcfg->stamp_xsec = new_stamp_xsec;
-	systemcfg->tb_to_xs = new_tb_to_xs;
+	_systemcfg->tb_orig_stamp = new_tb_stamp;
+	_systemcfg->stamp_xsec = new_stamp_xsec;
+	_systemcfg->tb_to_xs = new_tb_to_xs;
 	smp_wmb();
-	++(systemcfg->tb_update_count);
+	++(_systemcfg->tb_update_count);
 #endif
 }
 
@@ -357,8 +357,9 @@ static void iSeries_tb_recal(void)
 				do_gtod.tb_ticks_per_sec = tb_ticks_per_sec;
 				tb_to_xs = divres.result_low;
 				do_gtod.varp->tb_to_xs = tb_to_xs;
-				systemcfg->tb_ticks_per_sec = tb_ticks_per_sec;
-				systemcfg->tb_to_xs = tb_to_xs;
+				_systemcfg->tb_ticks_per_sec =
+					tb_ticks_per_sec;
+				_systemcfg->tb_to_xs = tb_to_xs;
 			}
 			else {
 				printk( "Titan recalibrate: FAILED (difference > 4 percent)\n"
@@ -559,8 +560,8 @@ int do_settimeofday(struct timespec *tv)
 	update_gtod(tb_last_jiffy, new_xsec, do_gtod.varp->tb_to_xs);
 
 #ifdef CONFIG_PPC64
-	systemcfg->tz_minuteswest = sys_tz.tz_minuteswest;
-	systemcfg->tz_dsttime = sys_tz.tz_dsttime;
+	_systemcfg->tz_minuteswest = sys_tz.tz_minuteswest;
+	_systemcfg->tz_dsttime = sys_tz.tz_dsttime;
 #endif
 
 	write_sequnlock_irqrestore(&xtime_lock, flags);
@@ -711,11 +712,11 @@ void __init time_init(void)
 	do_gtod.varp->tb_to_xs = tb_to_xs;
 	do_gtod.tb_to_us = tb_to_us;
 #ifdef CONFIG_PPC64
-	systemcfg->tb_orig_stamp = tb_last_jiffy;
-	systemcfg->tb_update_count = 0;
-	systemcfg->tb_ticks_per_sec = tb_ticks_per_sec;
-	systemcfg->stamp_xsec = xtime.tv_sec * XSEC_PER_SEC;
-	systemcfg->tb_to_xs = tb_to_xs;
+	_systemcfg->tb_orig_stamp = tb_last_jiffy;
+	_systemcfg->tb_update_count = 0;
+	_systemcfg->tb_ticks_per_sec = tb_ticks_per_sec;
+	_systemcfg->stamp_xsec = xtime.tv_sec * XSEC_PER_SEC;
+	_systemcfg->tb_to_xs = tb_to_xs;
 #endif
 
 	time_freq = 0;
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 0578f83..2020bb7 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -129,7 +129,7 @@ int die(const char *str, struct pt_regs *regs, long err)
 	nl = 1;
 #endif
 #ifdef CONFIG_PPC64
-	switch (systemcfg->platform) {
+	switch (_machine) {
 	case PLATFORM_PSERIES:
 		printk("PSERIES ");
 		nl = 1;
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index c8c9c2d..706e8a6 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -84,10 +84,11 @@
 extern unsigned long dart_tablebase;
 #endif /* CONFIG_U3_DART */
 
+static unsigned long _SDR1;
+struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT];
+
 hpte_t *htab_address;
 unsigned long htab_hash_mask;
-unsigned long _SDR1;
-struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT];
 int mmu_linear_psize = MMU_PAGE_4K;
 int mmu_virtual_psize = MMU_PAGE_4K;
 #ifdef CONFIG_HUGETLB_PAGE
@@ -165,7 +166,7 @@ int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
 		 * normal insert callback here.
 		 */
 #ifdef CONFIG_PPC_ISERIES
-		if (systemcfg->platform == PLATFORM_ISERIES_LPAR)
+		if (_machine == PLATFORM_ISERIES_LPAR)
 			ret = iSeries_hpte_insert(hpteg, va,
 						  virt_to_abs(paddr),
 						  tmp_mode,
@@ -174,7 +175,7 @@ int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
 		else
 #endif
 #ifdef CONFIG_PPC_PSERIES
-		if (systemcfg->platform & PLATFORM_LPAR)
+		if (_machine & PLATFORM_LPAR)
 			ret = pSeries_lpar_hpte_insert(hpteg, va,
 						       virt_to_abs(paddr),
 						       tmp_mode,
@@ -293,7 +294,7 @@ static void __init htab_init_page_sizes(void)
 	 * Not in the device-tree, let's fallback on known size
 	 * list for 16M capable GP & GR
 	 */
-	if ((systemcfg->platform != PLATFORM_ISERIES_LPAR) &&
+	if ((_machine != PLATFORM_ISERIES_LPAR) &&
 	    cpu_has_feature(CPU_FTR_16M_PAGE))
 		memcpy(mmu_psize_defs, mmu_psize_defaults_gp,
 		       sizeof(mmu_psize_defaults_gp));
@@ -364,7 +365,7 @@ static int __init htab_dt_scan_pftsize(unsigned long node,
 
 static unsigned long __init htab_get_table_size(void)
 {
-	unsigned long rnd_mem_size, pteg_count;
+	unsigned long mem_size, rnd_mem_size, pteg_count;
 
 	/* If hash size isn't already provided by the platform, we try to
 	 * retreive it from the device-tree. If it's not there neither, we
@@ -376,8 +377,9 @@ static unsigned long __init htab_get_table_size(void)
 		return 1UL << ppc64_pft_size;
 
 	/* round mem_size up to next power of 2 */
-	rnd_mem_size = 1UL << __ilog2(systemcfg->physicalMemorySize);
-	if (rnd_mem_size < systemcfg->physicalMemorySize)
+	mem_size = lmb_phys_mem_size();
+	rnd_mem_size = 1UL << __ilog2(mem_size);
+	if (rnd_mem_size < mem_size)
 		rnd_mem_size <<= 1;
 
 	/* # pages / 2 */
@@ -419,7 +421,7 @@ void __init htab_initialize(void)
 
 	htab_hash_mask = pteg_count - 1;
 
-	if (systemcfg->platform & PLATFORM_LPAR) {
+	if (platform_is_lpar()) {
 		/* Using a hypervisor which owns the htab */
 		htab_address = NULL;
 		_SDR1 = 0; 
@@ -440,6 +442,9 @@ void __init htab_initialize(void)
 
 		/* Initialize the HPT with no entries */
 		memset((void *)table, 0, htab_size_bytes);
+
+		/* Set SDR1 */
+		mtspr(SPRN_SDR1, _SDR1);
 	}
 
 	mode_rw = _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_COHERENT | PP_RWXX;
@@ -509,6 +514,12 @@ void __init htab_initialize(void)
 #undef KB
 #undef MB
 
+void __init htab_initialize_secondary(void)
+{
+	if (!platform_is_lpar())
+		mtspr(SPRN_SDR1, _SDR1);
+}
+
 /*
  * Called by asm hashtable.S for doing lazy icache flush
  */
diff --git a/arch/powerpc/mm/stab.c b/arch/powerpc/mm/stab.c
index fa325db..cfbb4e1 100644
--- a/arch/powerpc/mm/stab.c
+++ b/arch/powerpc/mm/stab.c
@@ -20,6 +20,7 @@
 #include <asm/cputable.h>
 #include <asm/lmb.h>
 #include <asm/abs_addr.h>
+#include <asm/firmware.h>
 
 struct stab_entry {
 	unsigned long esid_data;
@@ -256,7 +257,7 @@ void stabs_alloc(void)
 
 		paca[cpu].stab_addr = newstab;
 		paca[cpu].stab_real = virt_to_abs(newstab);
-		printk(KERN_DEBUG "Segment table for CPU %d at 0x%lx "
+		printk(KERN_INFO "Segment table for CPU %d at 0x%lx "
 		       "virtual, 0x%lx absolute\n",
 		       cpu, paca[cpu].stab_addr, paca[cpu].stab_real);
 	}
@@ -270,10 +271,28 @@ void stabs_alloc(void)
 void stab_initialize(unsigned long stab)
 {
 	unsigned long vsid = get_kernel_vsid(KERNELBASE);
+	unsigned long stabreal;
 
 	asm volatile("isync; slbia; isync":::"memory");
 	make_ste(stab, GET_ESID(KERNELBASE), vsid);
 
 	/* Order update */
 	asm volatile("sync":::"memory");
+
+	/* Set ASR */
+	stabreal = get_paca()->stab_real | 0x1ul;
+
+#ifdef CONFIG_PPC_ISERIES
+	if (firmware_has_feature(FW_FEATURE_ISERIES)) {
+		HvCall1(HvCallBaseSetASR, stabreal);
+		return;
+	}
+#endif /* CONFIG_PPC_ISERIES */
+#ifdef CONFIG_PPC_PSERIES
+	if (platform_is_lpar()) {
+		plpar_hcall_norets(H_SET_ASR, stabreal);
+		return;
+	}
+#endif
+	mtspr(SPRN_ASR, stabreal);
 }
diff --git a/arch/powerpc/oprofile/op_model_power4.c b/arch/powerpc/oprofile/op_model_power4.c
index c4ee547..e3a024e 100644
--- a/arch/powerpc/oprofile/op_model_power4.c
+++ b/arch/powerpc/oprofile/op_model_power4.c
@@ -233,8 +233,7 @@ static unsigned long get_pc(struct pt_regs *regs)
 	mmcra = mfspr(SPRN_MMCRA);
 
 	/* Were we in the hypervisor? */
-	if ((systemcfg->platform == PLATFORM_PSERIES_LPAR) &&
-	    (mmcra & MMCRA_SIHV))
+	if (platform_is_lpar() && (mmcra & MMCRA_SIHV))
 		/* function descriptor madness */
 		return *((unsigned long *)hypervisor_bucket);
 
diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c
index 7f8f0cd..623c39a 100644
--- a/arch/powerpc/platforms/iseries/setup.c
+++ b/arch/powerpc/platforms/iseries/setup.c
@@ -39,6 +39,7 @@
 #include <asm/sections.h>
 #include <asm/iommu.h>
 #include <asm/firmware.h>
+#include <asm/systemcfg.h>
 
 #include <asm/time.h>
 #include <asm/paca.h>
@@ -71,7 +72,7 @@ extern void hvlog(char *fmt, ...);
 #endif
 
 /* Function Prototypes */
-static void build_iSeries_Memory_Map(void);
+static unsigned long build_iSeries_Memory_Map(void);
 static void iseries_shared_idle(void);
 static void iseries_dedicated_idle(void);
 #ifdef CONFIG_PCI
@@ -403,9 +404,11 @@ void mschunks_alloc(unsigned long num_chunks)
  * a table used to translate Linux's physical addresses to these
  * absolute addresses.  Absolute addresses are needed when
  * communicating with the hypervisor (e.g. to build HPT entries)
+ *
+ * Returns the physical memory size
  */
 
-static void __init build_iSeries_Memory_Map(void)
+static unsigned long __init build_iSeries_Memory_Map(void)
 {
 	u32 loadAreaFirstChunk, loadAreaLastChunk, loadAreaSize;
 	u32 nextPhysChunk;
@@ -538,7 +541,7 @@ static void __init build_iSeries_Memory_Map(void)
 	 * which should be equal to
 	 *   nextPhysChunk
 	 */
-	systemcfg->physicalMemorySize = chunk_to_addr(nextPhysChunk);
+	return chunk_to_addr(nextPhysChunk);
 }
 
 /*
@@ -564,8 +567,8 @@ static void __init iSeries_setup_arch(void)
 	printk("Max physical processors = %d\n",
 			itVpdAreas.xSlicMaxPhysicalProcs);
 
-	systemcfg->processor = xIoHriProcessorVpd[procIx].xPVR;
-	printk("Processor version = %x\n", systemcfg->processor);
+	_systemcfg->processor = xIoHriProcessorVpd[procIx].xPVR;
+	printk("Processor version = %x\n", _systemcfg->processor);
 }
 
 static void iSeries_show_cpuinfo(struct seq_file *m)
@@ -929,7 +932,7 @@ void dt_cpus(struct iseries_flat_dt *dt)
 	dt_end_node(dt);
 }
 
-void build_flat_dt(struct iseries_flat_dt *dt)
+void build_flat_dt(struct iseries_flat_dt *dt, unsigned long phys_mem_size)
 {
 	u64 tmp[2];
 
@@ -945,7 +948,7 @@ void build_flat_dt(struct iseries_flat_dt *dt)
 	dt_prop_str(dt, "name", "memory");
 	dt_prop_str(dt, "device_type", "memory");
 	tmp[0] = 0;
-	tmp[1] = systemcfg->physicalMemorySize;
+	tmp[1] = phys_mem_size;
 	dt_prop_u64_list(dt, "reg", tmp, 2);
 	dt_end_node(dt);
 
@@ -965,13 +968,15 @@ void build_flat_dt(struct iseries_flat_dt *dt)
 
 void * __init iSeries_early_setup(void)
 {
+	unsigned long phys_mem_size;
+
 	iSeries_fixup_klimit();
 
 	/*
 	 * Initialize the table which translate Linux physical addresses to
 	 * AS/400 absolute addresses
 	 */
-	build_iSeries_Memory_Map();
+	phys_mem_size = build_iSeries_Memory_Map();
 
 	iSeries_get_cmdline();
 
@@ -981,7 +986,7 @@ void * __init iSeries_early_setup(void)
 	/* Parse early parameters, in particular mem=x */
 	parse_early_param();
 
-	build_flat_dt(&iseries_dt);
+	build_flat_dt(&iseries_dt, phys_mem_size);
 
 	return (void *) __pa(&iseries_dt);
 }
diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index b760836..a33ba83 100644
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -32,7 +32,6 @@
 #include <asm/machdep.h>
 #include <asm/ppc-pci.h>
 #include <asm/rtas.h>
-#include <asm/systemcfg.h>
 
 #undef DEBUG
 
@@ -1186,7 +1185,7 @@ static int __init eeh_init_proc(void)
 {
 	struct proc_dir_entry *e;
 
-	if (systemcfg->platform & PLATFORM_PSERIES) {
+	if (platform_is_pseries()) {
 		e = create_proc_entry("ppc64/eeh", 0, NULL);
 		if (e)
 			e->proc_fops = &proc_eeh_operations;
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index fcc50bf..97ba521 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -42,7 +42,6 @@
 #include <asm/machdep.h>
 #include <asm/abs_addr.h>
 #include <asm/pSeries_reconfig.h>
-#include <asm/systemcfg.h>
 #include <asm/firmware.h>
 #include <asm/tce.h>
 #include <asm/ppc-pci.h>
@@ -582,7 +581,7 @@ void iommu_init_early_pSeries(void)
 		return;
 	}
 
-	if (systemcfg->platform & PLATFORM_LPAR) {
+	if (platform_is_lpar()) {
 		if (firmware_has_feature(FW_FEATURE_MULTITCE)) {
 			ppc_md.tce_build = tce_buildmulti_pSeriesLP;
 			ppc_md.tce_free	 = tce_freemulti_pSeriesLP;
diff --git a/arch/powerpc/platforms/pseries/pci.c b/arch/powerpc/platforms/pseries/pci.c
index c198656..6b0772f 100644
--- a/arch/powerpc/platforms/pseries/pci.c
+++ b/arch/powerpc/platforms/pseries/pci.c
@@ -123,7 +123,7 @@ static void fixup_winbond_82c105(struct pci_dev* dev)
 	int i;
 	unsigned int reg;
 
-	if (!(systemcfg->platform & PLATFORM_PSERIES))
+	if (!platform_is_pseries())
 		return;
 
 	printk("Using INTC for W82c105 IDE controller.\n");
diff --git a/arch/powerpc/platforms/pseries/reconfig.c b/arch/powerpc/platforms/pseries/reconfig.c
index d7d4003..d886416 100644
--- a/arch/powerpc/platforms/pseries/reconfig.c
+++ b/arch/powerpc/platforms/pseries/reconfig.c
@@ -408,7 +408,7 @@ static int proc_ppc64_create_ofdt(void)
 {
 	struct proc_dir_entry *ent;
 
-	if (!(systemcfg->platform & PLATFORM_PSERIES))
+	if (!platform_is_pseries())
 		return 0;
 
 	ent = create_proc_entry("ppc64/ofdt", S_IWUSR, NULL);
diff --git a/arch/powerpc/platforms/pseries/rtasd.c b/arch/powerpc/platforms/pseries/rtasd.c
index e26b042..00cf331 100644
--- a/arch/powerpc/platforms/pseries/rtasd.c
+++ b/arch/powerpc/platforms/pseries/rtasd.c
@@ -482,10 +482,12 @@ static int __init rtas_init(void)
 {
 	struct proc_dir_entry *entry;
 
-	/* No RTAS, only warn if we are on a pSeries box  */
+	if (!platform_is_pseries())
+		return 0;
+
+	/* No RTAS */
 	if (rtas_token("event-scan") == RTAS_UNKNOWN_SERVICE) {
-		if (systemcfg->platform & PLATFORM_PSERIES)
-			printk(KERN_INFO "rtasd: no event-scan on system\n");
+		printk(KERN_INFO "rtasd: no event-scan on system\n");
 		return 1;
 	}
 
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index a093a0d..e94247c 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -249,7 +249,7 @@ static void __init pSeries_setup_arch(void)
 		ppc_md.idle_loop = default_idle;
 	}
 
-	if (systemcfg->platform & PLATFORM_LPAR)
+	if (platform_is_lpar())
 		ppc_md.enable_pmcs = pseries_lpar_enable_pmcs;
 	else
 		ppc_md.enable_pmcs = power4_enable_pmcs;
@@ -378,7 +378,7 @@ static void __init pSeries_init_early(void)
 
 	fw_feature_init();
 	
-	if (systemcfg->platform & PLATFORM_LPAR)
+	if (platform_is_lpar())
 		hpte_init_lpar();
 	else {
 		hpte_init_native();
@@ -388,7 +388,7 @@ static void __init pSeries_init_early(void)
 
 	generic_find_legacy_serial_ports(&physport, &default_speed);
 
-	if (systemcfg->platform & PLATFORM_LPAR)
+	if (platform_is_lpar())
 		find_udbg_vterm();
 	else if (physport) {
 		/* Map the uart for udbg. */
@@ -592,7 +592,7 @@ static void pseries_shared_idle(void)
 
 static int pSeries_pci_probe_mode(struct pci_bus *bus)
 {
-	if (systemcfg->platform & PLATFORM_LPAR)
+	if (platform_is_lpar())
 		return PCI_PROBE_DEVTREE;
 	return PCI_PROBE_NORMAL;
 }
diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c
index 7a243e8..3ba794c 100644
--- a/arch/powerpc/platforms/pseries/smp.c
+++ b/arch/powerpc/platforms/pseries/smp.c
@@ -46,6 +46,7 @@
 #include <asm/rtas.h>
 #include <asm/pSeries_reconfig.h>
 #include <asm/mpic.h>
+#include <asm/systemcfg.h>
 
 #include "plpar_wrappers.h"
 
@@ -96,7 +97,7 @@ int pSeries_cpu_disable(void)
 	int cpu = smp_processor_id();
 
 	cpu_clear(cpu, cpu_online_map);
-	systemcfg->processorCount--;
+	_systemcfg->processorCount--;
 
 	/*fix boot_cpuid here*/
 	if (cpu == boot_cpuid)
@@ -441,7 +442,7 @@ void __init smp_init_pSeries(void)
 	smp_ops->cpu_die = pSeries_cpu_die;
 
 	/* Processors can be added/removed only on LPAR */
-	if (systemcfg->platform == PLATFORM_PSERIES_LPAR)
+	if (platform_is_lpar())
 		pSeries_reconfig_notifier_register(&pSeries_smp_nb);
 #endif
 
diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c
index 405c4f3..72ac180 100644
--- a/arch/powerpc/platforms/pseries/xics.c
+++ b/arch/powerpc/platforms/pseries/xics.c
@@ -545,7 +545,9 @@ nextnode:
 		of_node_put(np);
 	}
 
-	if (systemcfg->platform == PLATFORM_PSERIES) {
+	if (platform_is_lpar())
+		ops = &pSeriesLP_ops;
+	else {
 #ifdef CONFIG_SMP
 		for_each_cpu(i) {
 			int hard_id;
@@ -561,8 +563,6 @@ nextnode:
 #else
 		xics_per_cpu[0] = ioremap(intr_base, intr_size);
 #endif /* CONFIG_SMP */
-	} else if (systemcfg->platform == PLATFORM_PSERIES_LPAR) {
-		ops = &pSeriesLP_ops;
 	}
 
 	xics_8259_pic.enable = i8259_pic.enable;
-- 
cgit v1.1


From 0a5cab42a1317326d87b0d074df50705a0c3fa77 Mon Sep 17 00:00:00 2001
From: Paul Mackerras <paulus@samba.org>
Date: Thu, 10 Nov 2005 14:23:54 +1100
Subject: powerpc: Fix compile error in EEH code with gcc4

Gcc 4 doesn't like being told to inline a recursive function...

Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/platforms/pseries/eeh.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index a33ba83..3a857b2 100644
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -478,7 +478,7 @@ static struct device_node * find_device_pe(struct device_node *dn)
  *  an interrupt context, which is bad.
  */
 
-static inline void __eeh_mark_slot (struct device_node *dn)
+static void __eeh_mark_slot (struct device_node *dn)
 {
 	while (dn) {
 		PCI_DN(dn)->eeh_mode |= EEH_MODE_ISOLATED;
@@ -489,7 +489,7 @@ static inline void __eeh_mark_slot (struct device_node *dn)
 	}
 }
 
-static inline void __eeh_clear_slot (struct device_node *dn)
+static void __eeh_clear_slot (struct device_node *dn)
 {
 	while (dn) {
 		PCI_DN(dn)->eeh_mode &= ~EEH_MODE_ISOLATED;
-- 
cgit v1.1


From 094fe2e712f38f49bf79ef93306c61b1b993b07b Mon Sep 17 00:00:00 2001
From: Paul Mackerras <paulus@samba.org>
Date: Thu, 10 Nov 2005 14:26:12 +1100
Subject: powerpc: Fixes for 32-bit powermac SMP

A couple of bugs crept in with the merge of smp.c...

Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/kernel/smp.c             |  8 ++++--
 arch/powerpc/platforms/powermac/smp.c | 51 +++++++++++++++++++++--------------
 2 files changed, 37 insertions(+), 22 deletions(-)

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 7fd5308..2ffdc86 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -369,11 +369,11 @@ int generic_cpu_disable(void)
 	if (cpu == boot_cpuid)
 		return -EBUSY;
 
+	cpu_clear(cpu, cpu_online_map);
 #ifdef CONFIG_PPC64
 	_systemcfg->processorCount--;
-#endif
-	cpu_clear(cpu, cpu_online_map);
 	fixup_irqs(cpu_online_map);
+#endif
 	return 0;
 }
 
@@ -391,9 +391,11 @@ int generic_cpu_enable(unsigned int cpu)
 	while (!cpu_online(cpu))
 		cpu_relax();
 
+#ifdef CONFIG_PPC64
 	fixup_irqs(cpu_online_map);
 	/* counter the irq disable in fixup_irqs */
 	local_irq_enable();
+#endif
 	return 0;
 }
 
@@ -422,7 +424,9 @@ void generic_mach_cpu_die(void)
 	while (__get_cpu_var(cpu_state) != CPU_UP_PREPARE)
 		cpu_relax();
 
+#ifdef CONFIG_PPC64
 	flush_tlb_pending();
+#endif
 	cpu_set(cpu, cpu_online_map);
 	local_irq_enable();
 }
diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index e1f9443..957b091 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -305,9 +305,19 @@ static int __init smp_psurge_probe(void)
 	psurge_start = ioremap(PSURGE_START, 4);
 	psurge_pri_intr = ioremap(PSURGE_PRI_INTR, 4);
 
-	/* this is not actually strictly necessary -- paulus. */
-	for (i = 1; i < ncpus; ++i)
-		smp_hw_index[i] = i;
+	/*
+	 * This is necessary because OF doesn't know about the
+	 * secondary cpu(s), and thus there aren't nodes in the
+	 * device tree for them, and smp_setup_cpu_maps hasn't
+	 * set their bits in cpu_possible_map and cpu_present_map.
+	 */
+	if (ncpus > NR_CPUS)
+		ncpus = NR_CPUS;
+	for (i = 1; i < ncpus ; ++i) {
+		cpu_set(i, cpu_present_map);
+		cpu_set(i, cpu_possible_map);
+		set_hard_smp_processor_id(i, i);
+	}
 
 	if (ppc_md.progress) ppc_md.progress("smp_psurge_probe - done", 0x352);
 
@@ -348,6 +358,7 @@ static void __init psurge_dual_sync_tb(int cpu_nr)
 	int t;
 
 	set_dec(tb_ticks_per_jiffy);
+	/* XXX fixme */
 	set_tb(0, 0);
 	last_jiffy_stamp(cpu_nr) = 0;
 
@@ -363,8 +374,6 @@ static void __init psurge_dual_sync_tb(int cpu_nr)
 
 	/* now interrupt the secondary, starting both TBs */
 	psurge_set_ipi(1);
-
-	smp_tb_synchronized = 1;
 }
 
 static struct irqaction psurge_irqaction = {
@@ -625,9 +634,8 @@ void smp_core99_give_timebase(void)
 	for (t = 100000; t > 0 && sec_tb_reset; --t)
 		udelay(10);
 	if (sec_tb_reset)
+		/* XXX BUG_ON here? */
 		printk(KERN_WARNING "Timeout waiting sync(2) on second CPU\n");
-	else
-		smp_tb_synchronized = 1;
 
 	/* Now, restart the timebase by leaving the GPIO to an open collector */
        	pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, core99_tb_gpio, 0);
@@ -810,19 +818,9 @@ static void __devinit smp_core99_setup_cpu(int cpu_nr)
 }
 
 
-/* Core99 Macs (dual G4s and G5s) */
-struct smp_ops_t core99_smp_ops = {
-	.message_pass	= smp_mpic_message_pass,
-	.probe		= smp_core99_probe,
-	.kick_cpu	= smp_core99_kick_cpu,
-	.setup_cpu	= smp_core99_setup_cpu,
-	.give_timebase	= smp_core99_give_timebase,
-	.take_timebase	= smp_core99_take_timebase,
-};
-
 #if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PPC32)
 
-int __cpu_disable(void)
+int smp_core99_cpu_disable(void)
 {
 	cpu_clear(smp_processor_id(), cpu_online_map);
 
@@ -846,7 +844,7 @@ void cpu_die(void)
 	low_cpu_die();
 }
 
-void __cpu_die(unsigned int cpu)
+void smp_core99_cpu_die(unsigned int cpu)
 {
 	int timeout;
 
@@ -858,8 +856,21 @@ void __cpu_die(unsigned int cpu)
 		}
 		msleep(1);
 	}
-	cpu_callin_map[cpu] = 0;
 	cpu_dead[cpu] = 0;
 }
 
 #endif
+
+/* Core99 Macs (dual G4s and G5s) */
+struct smp_ops_t core99_smp_ops = {
+	.message_pass	= smp_mpic_message_pass,
+	.probe		= smp_core99_probe,
+	.kick_cpu	= smp_core99_kick_cpu,
+	.setup_cpu	= smp_core99_setup_cpu,
+	.give_timebase	= smp_core99_give_timebase,
+	.take_timebase	= smp_core99_take_timebase,
+#if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PPC32)
+	.cpu_disable	= smp_core99_cpu_disable,
+	.cpu_die	= smp_core99_cpu_die,
+#endif
+};
-- 
cgit v1.1


From cbe62e2b4a764aa3f9a2b9c9004f8e86a1f0ade8 Mon Sep 17 00:00:00 2001
From: Paul Mackerras <paulus@samba.org>
Date: Thu, 10 Nov 2005 14:28:03 +1100
Subject: powerpc: Fix SMP time initialization problem

We were getting the last_jiffy per-cpu variable set ahead of the current
timebase in smp_space_timers on SMP machines.  This caused the loop in
timer_interrupt to loop virtually forever, since tb_ticks_since assumes
that it will never be called with the timebase behind the last_jiffy
value.

Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/kernel/time.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 386006b..260b6ec 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -484,6 +484,8 @@ void __init smp_space_timers(unsigned int max_cpus)
 	unsigned long offset = tb_ticks_per_jiffy / max_cpus;
 	unsigned long previous_tb = per_cpu(last_jiffy, boot_cpuid);
 
+	/* make sure tb > per_cpu(last_jiffy, cpu) for all cpus always */
+	previous_tb -= tb_ticks_per_jiffy;
 	for_each_cpu(i) {
 		if (i != boot_cpuid) {
 			previous_tb += offset;
-- 
cgit v1.1


From a7ddc5e85351931b67a48afa22788d77763837d8 Mon Sep 17 00:00:00 2001
From: Paul Mackerras <paulus@samba.org>
Date: Thu, 10 Nov 2005 14:29:18 +1100
Subject: powerpc: Add user CPU features for POWER4, POWER5, POWER5+ and Cell.

This is at the request of the glibc folks, who want to use these bits
to select libraries optimized for the microarchitecture and new
instructions in these processors.

Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/kernel/cputable.c | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index cc4e9eb..1d85ced 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -52,6 +52,9 @@ extern void __setup_cpu_ppc970(unsigned long offset, struct cpu_spec* spec);
 #define COMMON_USER		(PPC_FEATURE_32 | PPC_FEATURE_HAS_FPU | \
 				 PPC_FEATURE_HAS_MMU)
 #define COMMON_USER_PPC64	(COMMON_USER | PPC_FEATURE_64)
+#define COMMON_USER_POWER4	(COMMON_USER_PPC64 | PPC_FEATURE_POWER4)
+#define COMMON_USER_POWER5	(COMMON_USER_PPC64 | PPC_FEATURE_POWER5)
+#define COMMON_USER_POWER5_PLUS	(COMMON_USER_PPC64 | PPC_FEATURE_POWER5_PLUS)
 
 
 /* We only set the spe features if the kernel was compiled with
@@ -160,7 +163,7 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_value		= 0x00350000,
 		.cpu_name		= "POWER4 (gp)",
 		.cpu_features		= CPU_FTRS_POWER4,
-		.cpu_user_features	= COMMON_USER_PPC64,
+		.cpu_user_features	= COMMON_USER_POWER4,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 8,
@@ -175,7 +178,7 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_value		= 0x00380000,
 		.cpu_name		= "POWER4+ (gq)",
 		.cpu_features		= CPU_FTRS_POWER4,
-		.cpu_user_features	= COMMON_USER_PPC64,
+		.cpu_user_features	= COMMON_USER_POWER4,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 8,
@@ -190,7 +193,7 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_value		= 0x00390000,
 		.cpu_name		= "PPC970",
 		.cpu_features		= CPU_FTRS_PPC970,
-		.cpu_user_features	= COMMON_USER_PPC64 |
+		.cpu_user_features	= COMMON_USER_POWER4 |
 			PPC_FEATURE_HAS_ALTIVEC_COMP,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
@@ -212,7 +215,7 @@ struct cpu_spec	cpu_specs[] = {
 #else
 		.cpu_features		= CPU_FTRS_PPC970,
 #endif
-		.cpu_user_features	= COMMON_USER_PPC64 |
+		.cpu_user_features	= COMMON_USER_POWER4 |
 			PPC_FEATURE_HAS_ALTIVEC_COMP,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
@@ -230,7 +233,7 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_value		= 0x00440000,
 		.cpu_name		= "PPC970MP",
 		.cpu_features		= CPU_FTRS_PPC970,
-		.cpu_user_features	= COMMON_USER_PPC64 |
+		.cpu_user_features	= COMMON_USER_POWER4 |
 			PPC_FEATURE_HAS_ALTIVEC_COMP,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
@@ -245,7 +248,7 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_value		= 0x003a0000,
 		.cpu_name		= "POWER5 (gr)",
 		.cpu_features		= CPU_FTRS_POWER5,
-		.cpu_user_features	= COMMON_USER_PPC64,
+		.cpu_user_features	= COMMON_USER_POWER5,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 6,
@@ -260,7 +263,7 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_value		= 0x003b0000,
 		.cpu_name		= "POWER5 (gs)",
 		.cpu_features		= CPU_FTRS_POWER5,
-		.cpu_user_features	= COMMON_USER_PPC64,
+		.cpu_user_features	= COMMON_USER_POWER5_PLUS,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 6,
@@ -276,7 +279,7 @@ struct cpu_spec	cpu_specs[] = {
 		.cpu_name		= "Cell Broadband Engine",
 		.cpu_features		= CPU_FTRS_CELL,
 		.cpu_user_features	= COMMON_USER_PPC64 |
-			PPC_FEATURE_HAS_ALTIVEC_COMP,
+			PPC_FEATURE_CELL | PPC_FEATURE_HAS_ALTIVEC_COMP,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.cpu_setup		= __setup_cpu_be,
-- 
cgit v1.1


From e1449ed956ae29129bde3e5137dde1d579d585ff Mon Sep 17 00:00:00 2001
From: Paul Mackerras <paulus@samba.org>
Date: Thu, 10 Nov 2005 14:30:20 +1100
Subject: powerpc: 32-bit fixes for xmon

This makes the memory examine/change command print the address as
8 digits instead of 16, and makes the memory dump command print
4 4-byte values per line instead of 2 8-byte values.

Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/xmon/xmon.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index b43a574..cfcb2a5 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -1792,7 +1792,7 @@ memex(void)
 	for(;;){
 		if (!mnoread)
 			n = mread(adrs, val, size);
-		printf("%.16x%c", adrs, brev? 'r': ' ');
+		printf(REG"%c", adrs, brev? 'r': ' ');
 		if (!mnoread) {
 			if (brev)
 				byterev(val, size);
@@ -1971,17 +1971,18 @@ prdump(unsigned long adrs, long ndump)
 		nr = mread(adrs, temp, r);
 		adrs += nr;
 		for (m = 0; m < r; ++m) {
-		        if ((m & 7) == 0 && m > 0)
-			    putchar(' ');
+		        if ((m & (sizeof(long) - 1)) == 0 && m > 0)
+				putchar(' ');
 			if (m < nr)
 				printf("%.2x", temp[m]);
 			else
 				printf("%s", fault_chars[fault_type]);
 		}
-		if (m <= 8)
-			printf(" ");
-		for (; m < 16; ++m)
+		for (; m < 16; ++m) {
+		        if ((m & (sizeof(long) - 1)) == 0)
+				putchar(' ');
 			printf("  ");
+		}
 		printf("  |");
 		for (m = 0; m < r; ++m) {
 			if (m < nr) {
-- 
cgit v1.1


From 676e2497f87501fb190a5b06103d396ca9147373 Mon Sep 17 00:00:00 2001
From: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Thu, 10 Nov 2005 14:16:21 +1100
Subject: powerpc: remove some warnings when building iSeries

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
---
 arch/powerpc/kernel/prom.c             | 6 +++---
 arch/powerpc/platforms/iseries/setup.c | 1 -
 2 files changed, 3 insertions(+), 4 deletions(-)

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 1bf3642..fd3bcb4 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -1084,9 +1084,9 @@ void __init unflatten_device_tree(void)
 static int __init early_init_dt_scan_cpus(unsigned long node,
 					  const char *uname, int depth, void *data)
 {
-	char *type = of_get_flat_dt_prop(node, "device_type", NULL);
 	u32 *prop;
-	unsigned long size = 0;
+	unsigned long size;
+	char *type = of_get_flat_dt_prop(node, "device_type", &size);
 
 	/* We are scanning "cpu" nodes only */
 	if (type == NULL || strcmp(type, "cpu") != 0)
@@ -1112,7 +1112,7 @@ static int __init early_init_dt_scan_cpus(unsigned long node,
 
 #ifdef CONFIG_ALTIVEC
 	/* Check if we have a VMX and eventually update CPU features */
-	prop = (u32 *)of_get_flat_dt_prop(node, "ibm,vmx", &size);
+	prop = (u32 *)of_get_flat_dt_prop(node, "ibm,vmx", NULL);
 	if (prop && (*prop) > 0) {
 		cur_cpu_spec->cpu_features |= CPU_FTR_ALTIVEC;
 		cur_cpu_spec->cpu_user_features |= PPC_FEATURE_HAS_ALTIVEC;
diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c
index 623c39a..19b415f 100644
--- a/arch/powerpc/platforms/iseries/setup.c
+++ b/arch/powerpc/platforms/iseries/setup.c
@@ -705,7 +705,6 @@ static void iseries_shared_idle(void)
 
 static void iseries_dedicated_idle(void)
 {
-	long oldval;
 	set_thread_flag(TIF_POLLING_NRFLAG);
 
 	while (1) {
-- 
cgit v1.1


From 87655ff26817993932b7d049c4df226fb2c0ac5f Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Thu, 10 Nov 2005 14:53:16 +1100
Subject: [PATCH] powerpc: 64k pages pmd alloc fix

This patch makes the kernel use a different kmem cache for PMD pages
as they are smaller than PTE pages. Avoids waste of memory.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/mm/init_64.c | 18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c
index ce974c8..e274cf10 100644
--- a/arch/powerpc/mm/init_64.c
+++ b/arch/powerpc/mm/init_64.c
@@ -20,6 +20,8 @@
  *
  */
 
+#undef DEBUG
+
 #include <linux/config.h>
 #include <linux/signal.h>
 #include <linux/sched.h>
@@ -64,6 +66,12 @@
 #include <asm/vdso.h>
 #include <asm/imalloc.h>
 
+#ifdef DEBUG
+#define DBG(fmt...) printk(fmt)
+#else
+#define DBG(fmt...)
+#endif
+
 #if PGTABLE_RANGE > USER_VSID_RANGE
 #warning Limited user VSID range means pagetable space is wasted
 #endif
@@ -188,14 +196,14 @@ static void zero_ctor(void *addr, kmem_cache_t *cache, unsigned long flags)
 }
 
 #ifdef CONFIG_PPC_64K_PAGES
-static const int pgtable_cache_size[2] = {
-	PTE_TABLE_SIZE, PGD_TABLE_SIZE
+static const unsigned int pgtable_cache_size[3] = {
+	PTE_TABLE_SIZE, PMD_TABLE_SIZE, PGD_TABLE_SIZE
 };
 static const char *pgtable_cache_name[ARRAY_SIZE(pgtable_cache_size)] = {
-	"pte_pmd_cache", "pgd_cache",
+	"pte_pmd_cache", "pmd_cache", "pgd_cache",
 };
 #else
-static const int pgtable_cache_size[2] = {
+static const unsigned int pgtable_cache_size[2] = {
 	PTE_TABLE_SIZE, PMD_TABLE_SIZE
 };
 static const char *pgtable_cache_name[ARRAY_SIZE(pgtable_cache_size)] = {
@@ -213,6 +221,8 @@ void pgtable_cache_init(void)
 		int size = pgtable_cache_size[i];
 		const char *name = pgtable_cache_name[i];
 
+		DBG("Allocating page table cache %s (#%d) "
+		    "for size: %08x...\n", name, i, size);
 		pgtable_cache[i] = kmem_cache_create(name,
 						     size, size,
 						     SLAB_HWCACHE_ALIGN |
-- 
cgit v1.1


From 47c2ac8cc3cf7c484e131d10cb812b6ab198885a Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Thu, 10 Nov 2005 14:54:58 +1100
Subject: [PATCH] powerpc: 64k pages vs. U3 iommu

That DART (U3 iommu) code didn't properly scale the number of entries
when using !4k pages. That caused crashes when booting G5s with more
than 2Gb of RAM. This fixes it.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/sysdev/u3_iommu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/sysdev/u3_iommu.c b/arch/powerpc/sysdev/u3_iommu.c
index 543d659..f32baf7 100644
--- a/arch/powerpc/sysdev/u3_iommu.c
+++ b/arch/powerpc/sysdev/u3_iommu.c
@@ -226,7 +226,7 @@ static void iommu_table_u3_setup(void)
 	iommu_table_u3.it_busno = 0;
 	iommu_table_u3.it_offset = 0;
 	/* it_size is in number of entries */
-	iommu_table_u3.it_size = dart_tablesize / sizeof(u32);
+	iommu_table_u3.it_size = (dart_tablesize / sizeof(u32)) >> DART_PAGE_FACTOR;
 
 	/* Initialize the common IOMMU code */
 	iommu_table_u3.it_base = (unsigned long)dart_vbase;
-- 
cgit v1.1


From 0f34f490290e05ee6c02e20b3811fce6f09318f4 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Thu, 10 Nov 2005 15:04:24 +1100
Subject: [PATCH] ppc64: fix PCI IO mapping

phbs_remap_io(), which maps the PCI IO space into the kernel virtual space,
is called too early on powermac, and thus doesn't work.

This fixes it by removing the call from all platforms and putting it back
into the ppc64 common code where it belongs, after the actual probing of
the bus.

That means that before that call, only the ISA IO space (if any) is mapped,
any PIO access (from quirks for example) will fail. This happens not to be
a problem for now, but we'll have to rework that code if it becomes one in
the future.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/platforms/maple/pci.c    | 3 ---
 arch/powerpc/platforms/powermac/pci.c | 3 ---
 arch/powerpc/platforms/pseries/pci.c  | 1 -
 3 files changed, 7 deletions(-)

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c
index 340c21c..895aeb3 100644
--- a/arch/powerpc/platforms/maple/pci.c
+++ b/arch/powerpc/platforms/maple/pci.c
@@ -380,9 +380,6 @@ void __init maple_pcibios_fixup(void)
 	for_each_pci_dev(dev)
 		pci_read_irq_line(dev);
 
-	/* Do the mapping of the IO space */
-	phbs_remap_io();
-
 	DBG(" <- maple_pcibios_fixup\n");
 }
 
diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c
index 8f818d0..dfd41b9 100644
--- a/arch/powerpc/platforms/powermac/pci.c
+++ b/arch/powerpc/platforms/powermac/pci.c
@@ -918,9 +918,6 @@ void __init pmac_pci_init(void)
 			PCI_DN(np)->busno = 0xf0;
 	}
 
-	/* map in PCI I/O space */
-	phbs_remap_io();
-
 	/* pmac_check_ht_link(); */
 
 	/* Tell pci.c to not use the common resource allocation mechanism */
diff --git a/arch/powerpc/platforms/pseries/pci.c b/arch/powerpc/platforms/pseries/pci.c
index 6b0772f..999a962 100644
--- a/arch/powerpc/platforms/pseries/pci.c
+++ b/arch/powerpc/platforms/pseries/pci.c
@@ -107,7 +107,6 @@ static void __init pSeries_request_regions(void)
 
 void __init pSeries_final_fixup(void)
 {
-	phbs_remap_io();
 	pSeries_request_regions();
 
 	pci_addr_cache_build();
-- 
cgit v1.1


From d3d2176a0bc696b5365ce0e8f82a29a521d85fd0 Mon Sep 17 00:00:00 2001
From: David Gibson <david@gibson.dropbear.id.au>
Date: Thu, 10 Nov 2005 15:26:20 +1100
Subject: [PATCH] powerpc: Move more ppc64 files with no ppc32 equivalent to
 powerpc

This patch moves a bunch more files from arch/ppc64 and
include/asm-ppc64 which have no equivalents in ppc32 code into
arch/powerpc and include/asm-powerpc.  The file affected are:
	hvcall.h
	proc_ppc64.c
	sysfs.c
	lparcfg.c
	rtas_pci.c

The only changes apart from the move and corresponding Makefile
changes are:
	- #ifndef/#define in includes updated to _ASM_POWERPC_ form
	- trailing whitespace removed
	- comments giving full paths removed

Built and booted on POWER5 LPAR (ARCH=powerpc and ARCH=ppc64), built
for 32-bit powermac (ARCH=powerpc).

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/kernel/Makefile     |   8 +-
 arch/powerpc/kernel/lparcfg.c    | 612 +++++++++++++++++++++++++++++++++++++++
 arch/powerpc/kernel/proc_ppc64.c | 126 ++++++++
 arch/powerpc/kernel/rtas_pci.c   | 513 ++++++++++++++++++++++++++++++++
 arch/powerpc/kernel/sysfs.c      | 384 ++++++++++++++++++++++++
 5 files changed, 1641 insertions(+), 2 deletions(-)
 create mode 100644 arch/powerpc/kernel/lparcfg.c
 create mode 100644 arch/powerpc/kernel/proc_ppc64.c
 create mode 100644 arch/powerpc/kernel/rtas_pci.c
 create mode 100644 arch/powerpc/kernel/sysfs.c

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 92cfabf..c04bbd3 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -16,13 +16,17 @@ obj-y				:= semaphore.o cputable.o ptrace.o syscalls.o \
 obj-$(CONFIG_PPC64)		+= setup_64.o binfmt_elf32.o sys_ppc32.o \
 				   signal_64.o ptrace32.o systbl.o \
 				   paca.o ioctl32.o cpu_setup_power4.o \
-				   firmware.o
+				   firmware.o sysfs.o
 obj-$(CONFIG_ALTIVEC)		+= vecemu.o vector.o
 obj-$(CONFIG_POWER4)		+= idle_power4.o
 obj-$(CONFIG_PPC_OF)		+= of_device.o
-obj-$(CONFIG_PPC_RTAS)		+= rtas.o
+procfs-$(CONFIG_PPC64)		:= proc_ppc64.o
+obj-$(CONFIG_PROC_FS)		+= $(procfs-y)
+rtaspci-$(CONFIG_PPC64)		:= rtas_pci.o
+obj-$(CONFIG_PPC_RTAS)		+= rtas.o $(rtaspci-y)
 obj-$(CONFIG_RTAS_FLASH)	+= rtas_flash.o
 obj-$(CONFIG_RTAS_PROC)		+= rtas-proc.o
+obj-$(CONFIG_LPARCFG)		+= lparcfg.o
 obj-$(CONFIG_IBMVIO)		+= vio.o
 obj-$(CONFIG_GENERIC_TBSYNC)	+= smp-tbsync.o
 
diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c
new file mode 100644
index 0000000..5e954fa
--- /dev/null
+++ b/arch/powerpc/kernel/lparcfg.c
@@ -0,0 +1,612 @@
+/*
+ * PowerPC64 LPAR Configuration Information Driver
+ *
+ * Dave Engebretsen engebret@us.ibm.com
+ *    Copyright (c) 2003 Dave Engebretsen
+ * Will Schmidt willschm@us.ibm.com
+ *    SPLPAR updates, Copyright (c) 2003 Will Schmidt IBM Corporation.
+ *    seq_file updates, Copyright (c) 2004 Will Schmidt IBM Corporation.
+ * Nathan Lynch nathanl@austin.ibm.com
+ *    Added lparcfg_write, Copyright (C) 2004 Nathan Lynch IBM Corporation.
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ *
+ * This driver creates a proc file at /proc/ppc64/lparcfg which contains
+ * keyword - value pairs that specify the configuration of the partition.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/proc_fs.h>
+#include <linux/init.h>
+#include <linux/seq_file.h>
+#include <asm/uaccess.h>
+#include <asm/iseries/hv_lp_config.h>
+#include <asm/lppaca.h>
+#include <asm/hvcall.h>
+#include <asm/firmware.h>
+#include <asm/rtas.h>
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/iseries/it_exp_vpd_panel.h>
+#include <asm/prom.h>
+#include <asm/systemcfg.h>
+
+#define MODULE_VERS "1.6"
+#define MODULE_NAME "lparcfg"
+
+/* #define LPARCFG_DEBUG */
+
+/* find a better place for this function... */
+void log_plpar_hcall_return(unsigned long rc, char *tag)
+{
+	if (rc == 0)		/* success, return */
+		return;
+/* check for null tag ? */
+	if (rc == H_Hardware)
+		printk(KERN_INFO
+		       "plpar-hcall (%s) failed with hardware fault\n", tag);
+	else if (rc == H_Function)
+		printk(KERN_INFO
+		       "plpar-hcall (%s) failed; function not allowed\n", tag);
+	else if (rc == H_Authority)
+		printk(KERN_INFO
+		       "plpar-hcall (%s) failed; not authorized to this function\n",
+		       tag);
+	else if (rc == H_Parameter)
+		printk(KERN_INFO "plpar-hcall (%s) failed; Bad parameter(s)\n",
+		       tag);
+	else
+		printk(KERN_INFO
+		       "plpar-hcall (%s) failed with unexpected rc(0x%lx)\n",
+		       tag, rc);
+
+}
+
+static struct proc_dir_entry *proc_ppc64_lparcfg;
+#define LPARCFG_BUFF_SIZE 4096
+
+#ifdef CONFIG_PPC_ISERIES
+
+/*
+ * For iSeries legacy systems, the PPA purr function is available from the
+ * emulated_time_base field in the paca.
+ */
+static unsigned long get_purr(void)
+{
+	unsigned long sum_purr = 0;
+	int cpu;
+	struct paca_struct *lpaca;
+
+	for_each_cpu(cpu) {
+		lpaca = paca + cpu;
+		sum_purr += lpaca->lppaca.emulated_time_base;
+
+#ifdef PURR_DEBUG
+		printk(KERN_INFO "get_purr for cpu (%d) has value (%ld) \n",
+			cpu, lpaca->lppaca.emulated_time_base);
+#endif
+	}
+	return sum_purr;
+}
+
+#define lparcfg_write NULL
+
+/*
+ * Methods used to fetch LPAR data when running on an iSeries platform.
+ */
+static int lparcfg_data(struct seq_file *m, void *v)
+{
+	unsigned long pool_id, lp_index;
+	int shared, entitled_capacity, max_entitled_capacity;
+	int processors, max_processors;
+	struct paca_struct *lpaca = get_paca();
+	unsigned long purr = get_purr();
+
+	seq_printf(m, "%s %s \n", MODULE_NAME, MODULE_VERS);
+
+	shared = (int)(lpaca->lppaca_ptr->shared_proc);
+	seq_printf(m, "serial_number=%c%c%c%c%c%c%c\n",
+		   e2a(xItExtVpdPanel.mfgID[2]),
+		   e2a(xItExtVpdPanel.mfgID[3]),
+		   e2a(xItExtVpdPanel.systemSerial[1]),
+		   e2a(xItExtVpdPanel.systemSerial[2]),
+		   e2a(xItExtVpdPanel.systemSerial[3]),
+		   e2a(xItExtVpdPanel.systemSerial[4]),
+		   e2a(xItExtVpdPanel.systemSerial[5]));
+
+	seq_printf(m, "system_type=%c%c%c%c\n",
+		   e2a(xItExtVpdPanel.machineType[0]),
+		   e2a(xItExtVpdPanel.machineType[1]),
+		   e2a(xItExtVpdPanel.machineType[2]),
+		   e2a(xItExtVpdPanel.machineType[3]));
+
+	lp_index = HvLpConfig_getLpIndex();
+	seq_printf(m, "partition_id=%d\n", (int)lp_index);
+
+	seq_printf(m, "system_active_processors=%d\n",
+		   (int)HvLpConfig_getSystemPhysicalProcessors());
+
+	seq_printf(m, "system_potential_processors=%d\n",
+		   (int)HvLpConfig_getSystemPhysicalProcessors());
+
+	processors = (int)HvLpConfig_getPhysicalProcessors();
+	seq_printf(m, "partition_active_processors=%d\n", processors);
+
+	max_processors = (int)HvLpConfig_getMaxPhysicalProcessors();
+	seq_printf(m, "partition_potential_processors=%d\n", max_processors);
+
+	if (shared) {
+		entitled_capacity = HvLpConfig_getSharedProcUnits();
+		max_entitled_capacity = HvLpConfig_getMaxSharedProcUnits();
+	} else {
+		entitled_capacity = processors * 100;
+		max_entitled_capacity = max_processors * 100;
+	}
+	seq_printf(m, "partition_entitled_capacity=%d\n", entitled_capacity);
+
+	seq_printf(m, "partition_max_entitled_capacity=%d\n",
+		   max_entitled_capacity);
+
+	if (shared) {
+		pool_id = HvLpConfig_getSharedPoolIndex();
+		seq_printf(m, "pool=%d\n", (int)pool_id);
+		seq_printf(m, "pool_capacity=%d\n",
+			   (int)(HvLpConfig_getNumProcsInSharedPool(pool_id) *
+				 100));
+		seq_printf(m, "purr=%ld\n", purr);
+	}
+
+	seq_printf(m, "shared_processor_mode=%d\n", shared);
+
+	return 0;
+}
+#endif				/* CONFIG_PPC_ISERIES */
+
+#ifdef CONFIG_PPC_PSERIES
+/*
+ * Methods used to fetch LPAR data when running on a pSeries platform.
+ */
+
+/*
+ * H_GET_PPP hcall returns info in 4 parms.
+ *  entitled_capacity,unallocated_capacity,
+ *  aggregation, resource_capability).
+ *
+ *  R4 = Entitled Processor Capacity Percentage.
+ *  R5 = Unallocated Processor Capacity Percentage.
+ *  R6 (AABBCCDDEEFFGGHH).
+ *      XXXX - reserved (0)
+ *          XXXX - reserved (0)
+ *              XXXX - Group Number
+ *                  XXXX - Pool Number.
+ *  R7 (IIJJKKLLMMNNOOPP).
+ *      XX - reserved. (0)
+ *        XX - bit 0-6 reserved (0).   bit 7 is Capped indicator.
+ *          XX - variable processor Capacity Weight
+ *            XX - Unallocated Variable Processor Capacity Weight.
+ *              XXXX - Active processors in Physical Processor Pool.
+ *                  XXXX  - Processors active on platform.
+ */
+static unsigned int h_get_ppp(unsigned long *entitled,
+			      unsigned long *unallocated,
+			      unsigned long *aggregation,
+			      unsigned long *resource)
+{
+	unsigned long rc;
+	rc = plpar_hcall_4out(H_GET_PPP, 0, 0, 0, 0, entitled, unallocated,
+			      aggregation, resource);
+
+	log_plpar_hcall_return(rc, "H_GET_PPP");
+
+	return rc;
+}
+
+static void h_pic(unsigned long *pool_idle_time, unsigned long *num_procs)
+{
+	unsigned long rc;
+	unsigned long dummy;
+	rc = plpar_hcall(H_PIC, 0, 0, 0, 0, pool_idle_time, num_procs, &dummy);
+
+	log_plpar_hcall_return(rc, "H_PIC");
+}
+
+static unsigned long get_purr(void);
+
+/* Track sum of all purrs across all processors. This is used to further */
+/* calculate usage values by different applications                       */
+
+static unsigned long get_purr(void)
+{
+	unsigned long sum_purr = 0;
+	int cpu;
+	struct cpu_usage *cu;
+
+	for_each_cpu(cpu) {
+		cu = &per_cpu(cpu_usage_array, cpu);
+		sum_purr += cu->current_tb;
+	}
+	return sum_purr;
+}
+
+#define SPLPAR_CHARACTERISTICS_TOKEN 20
+#define SPLPAR_MAXLENGTH 1026*(sizeof(char))
+
+/*
+ * parse_system_parameter_string()
+ * Retrieve the potential_processors, max_entitled_capacity and friends
+ * through the get-system-parameter rtas call.  Replace keyword strings as
+ * necessary.
+ */
+static void parse_system_parameter_string(struct seq_file *m)
+{
+	int call_status;
+
+	char *local_buffer = kmalloc(SPLPAR_MAXLENGTH, GFP_KERNEL);
+	if (!local_buffer) {
+		printk(KERN_ERR "%s %s kmalloc failure at line %d \n",
+		       __FILE__, __FUNCTION__, __LINE__);
+		return;
+	}
+
+	spin_lock(&rtas_data_buf_lock);
+	memset(rtas_data_buf, 0, SPLPAR_MAXLENGTH);
+	call_status = rtas_call(rtas_token("ibm,get-system-parameter"), 3, 1,
+				NULL,
+				SPLPAR_CHARACTERISTICS_TOKEN,
+				__pa(rtas_data_buf));
+	memcpy(local_buffer, rtas_data_buf, SPLPAR_MAXLENGTH);
+	spin_unlock(&rtas_data_buf_lock);
+
+	if (call_status != 0) {
+		printk(KERN_INFO
+		       "%s %s Error calling get-system-parameter (0x%x)\n",
+		       __FILE__, __FUNCTION__, call_status);
+	} else {
+		int splpar_strlen;
+		int idx, w_idx;
+		char *workbuffer = kmalloc(SPLPAR_MAXLENGTH, GFP_KERNEL);
+		if (!workbuffer) {
+			printk(KERN_ERR "%s %s kmalloc failure at line %d \n",
+			       __FILE__, __FUNCTION__, __LINE__);
+			kfree(local_buffer);
+			return;
+		}
+#ifdef LPARCFG_DEBUG
+		printk(KERN_INFO "success calling get-system-parameter \n");
+#endif
+		splpar_strlen = local_buffer[0] * 16 + local_buffer[1];
+		local_buffer += 2;	/* step over strlen value */
+
+		memset(workbuffer, 0, SPLPAR_MAXLENGTH);
+		w_idx = 0;
+		idx = 0;
+		while ((*local_buffer) && (idx < splpar_strlen)) {
+			workbuffer[w_idx++] = local_buffer[idx++];
+			if ((local_buffer[idx] == ',')
+			    || (local_buffer[idx] == '\0')) {
+				workbuffer[w_idx] = '\0';
+				if (w_idx) {
+					/* avoid the empty string */
+					seq_printf(m, "%s\n", workbuffer);
+				}
+				memset(workbuffer, 0, SPLPAR_MAXLENGTH);
+				idx++;	/* skip the comma */
+				w_idx = 0;
+			} else if (local_buffer[idx] == '=') {
+				/* code here to replace workbuffer contents
+				   with different keyword strings */
+				if (0 == strcmp(workbuffer, "MaxEntCap")) {
+					strcpy(workbuffer,
+					       "partition_max_entitled_capacity");
+					w_idx = strlen(workbuffer);
+				}
+				if (0 == strcmp(workbuffer, "MaxPlatProcs")) {
+					strcpy(workbuffer,
+					       "system_potential_processors");
+					w_idx = strlen(workbuffer);
+				}
+			}
+		}
+		kfree(workbuffer);
+		local_buffer -= 2;	/* back up over strlen value */
+	}
+	kfree(local_buffer);
+}
+
+static int lparcfg_count_active_processors(void);
+
+/* Return the number of processors in the system.
+ * This function reads through the device tree and counts
+ * the virtual processors, this does not include threads.
+ */
+static int lparcfg_count_active_processors(void)
+{
+	struct device_node *cpus_dn = NULL;
+	int count = 0;
+
+	while ((cpus_dn = of_find_node_by_type(cpus_dn, "cpu"))) {
+#ifdef LPARCFG_DEBUG
+		printk(KERN_ERR "cpus_dn %p \n", cpus_dn);
+#endif
+		count++;
+	}
+	return count;
+}
+
+static int lparcfg_data(struct seq_file *m, void *v)
+{
+	int partition_potential_processors;
+	int partition_active_processors;
+	struct device_node *rootdn;
+	const char *model = "";
+	const char *system_id = "";
+	unsigned int *lp_index_ptr, lp_index = 0;
+	struct device_node *rtas_node;
+	int *lrdrp;
+
+	rootdn = find_path_device("/");
+	if (rootdn) {
+		model = get_property(rootdn, "model", NULL);
+		system_id = get_property(rootdn, "system-id", NULL);
+		lp_index_ptr = (unsigned int *)
+		    get_property(rootdn, "ibm,partition-no", NULL);
+		if (lp_index_ptr)
+			lp_index = *lp_index_ptr;
+	}
+
+	seq_printf(m, "%s %s \n", MODULE_NAME, MODULE_VERS);
+
+	seq_printf(m, "serial_number=%s\n", system_id);
+
+	seq_printf(m, "system_type=%s\n", model);
+
+	seq_printf(m, "partition_id=%d\n", (int)lp_index);
+
+	rtas_node = find_path_device("/rtas");
+	lrdrp = (int *)get_property(rtas_node, "ibm,lrdr-capacity", NULL);
+
+	if (lrdrp == NULL) {
+		partition_potential_processors = _systemcfg->processorCount;
+	} else {
+		partition_potential_processors = *(lrdrp + 4);
+	}
+
+	partition_active_processors = lparcfg_count_active_processors();
+
+	if (firmware_has_feature(FW_FEATURE_SPLPAR)) {
+		unsigned long h_entitled, h_unallocated;
+		unsigned long h_aggregation, h_resource;
+		unsigned long pool_idle_time, pool_procs;
+		unsigned long purr;
+
+		h_get_ppp(&h_entitled, &h_unallocated, &h_aggregation,
+			  &h_resource);
+
+		seq_printf(m, "R4=0x%lx\n", h_entitled);
+		seq_printf(m, "R5=0x%lx\n", h_unallocated);
+		seq_printf(m, "R6=0x%lx\n", h_aggregation);
+		seq_printf(m, "R7=0x%lx\n", h_resource);
+
+		purr = get_purr();
+
+		/* this call handles the ibm,get-system-parameter contents */
+		parse_system_parameter_string(m);
+
+		seq_printf(m, "partition_entitled_capacity=%ld\n", h_entitled);
+
+		seq_printf(m, "group=%ld\n", (h_aggregation >> 2 * 8) & 0xffff);
+
+		seq_printf(m, "system_active_processors=%ld\n",
+			   (h_resource >> 0 * 8) & 0xffff);
+
+		/* pool related entries are apropriate for shared configs */
+		if (paca[0].lppaca.shared_proc) {
+
+			h_pic(&pool_idle_time, &pool_procs);
+
+			seq_printf(m, "pool=%ld\n",
+				   (h_aggregation >> 0 * 8) & 0xffff);
+
+			/* report pool_capacity in percentage */
+			seq_printf(m, "pool_capacity=%ld\n",
+				   ((h_resource >> 2 * 8) & 0xffff) * 100);
+
+			seq_printf(m, "pool_idle_time=%ld\n", pool_idle_time);
+
+			seq_printf(m, "pool_num_procs=%ld\n", pool_procs);
+		}
+
+		seq_printf(m, "unallocated_capacity_weight=%ld\n",
+			   (h_resource >> 4 * 8) & 0xFF);
+
+		seq_printf(m, "capacity_weight=%ld\n",
+			   (h_resource >> 5 * 8) & 0xFF);
+
+		seq_printf(m, "capped=%ld\n", (h_resource >> 6 * 8) & 0x01);
+
+		seq_printf(m, "unallocated_capacity=%ld\n", h_unallocated);
+
+		seq_printf(m, "purr=%ld\n", purr);
+
+	} else {		/* non SPLPAR case */
+
+		seq_printf(m, "system_active_processors=%d\n",
+			   partition_potential_processors);
+
+		seq_printf(m, "system_potential_processors=%d\n",
+			   partition_potential_processors);
+
+		seq_printf(m, "partition_max_entitled_capacity=%d\n",
+			   partition_potential_processors * 100);
+
+		seq_printf(m, "partition_entitled_capacity=%d\n",
+			   partition_active_processors * 100);
+	}
+
+	seq_printf(m, "partition_active_processors=%d\n",
+		   partition_active_processors);
+
+	seq_printf(m, "partition_potential_processors=%d\n",
+		   partition_potential_processors);
+
+	seq_printf(m, "shared_processor_mode=%d\n", paca[0].lppaca.shared_proc);
+
+	return 0;
+}
+
+/*
+ * Interface for changing system parameters (variable capacity weight
+ * and entitled capacity).  Format of input is "param_name=value";
+ * anything after value is ignored.  Valid parameters at this time are
+ * "partition_entitled_capacity" and "capacity_weight".  We use
+ * H_SET_PPP to alter parameters.
+ *
+ * This function should be invoked only on systems with
+ * FW_FEATURE_SPLPAR.
+ */
+static ssize_t lparcfg_write(struct file *file, const char __user * buf,
+			     size_t count, loff_t * off)
+{
+	char *kbuf;
+	char *tmp;
+	u64 new_entitled, *new_entitled_ptr = &new_entitled;
+	u8 new_weight, *new_weight_ptr = &new_weight;
+
+	unsigned long current_entitled;	/* parameters for h_get_ppp */
+	unsigned long dummy;
+	unsigned long resource;
+	u8 current_weight;
+
+	ssize_t retval = -ENOMEM;
+
+	kbuf = kmalloc(count, GFP_KERNEL);
+	if (!kbuf)
+		goto out;
+
+	retval = -EFAULT;
+	if (copy_from_user(kbuf, buf, count))
+		goto out;
+
+	retval = -EINVAL;
+	kbuf[count - 1] = '\0';
+	tmp = strchr(kbuf, '=');
+	if (!tmp)
+		goto out;
+
+	*tmp++ = '\0';
+
+	if (!strcmp(kbuf, "partition_entitled_capacity")) {
+		char *endp;
+		*new_entitled_ptr = (u64) simple_strtoul(tmp, &endp, 10);
+		if (endp == tmp)
+			goto out;
+		new_weight_ptr = &current_weight;
+	} else if (!strcmp(kbuf, "capacity_weight")) {
+		char *endp;
+		*new_weight_ptr = (u8) simple_strtoul(tmp, &endp, 10);
+		if (endp == tmp)
+			goto out;
+		new_entitled_ptr = &current_entitled;
+	} else
+		goto out;
+
+	/* Get our current parameters */
+	retval = h_get_ppp(&current_entitled, &dummy, &dummy, &resource);
+	if (retval) {
+		retval = -EIO;
+		goto out;
+	}
+
+	current_weight = (resource >> 5 * 8) & 0xFF;
+
+	pr_debug("%s: current_entitled = %lu, current_weight = %lu\n",
+		 __FUNCTION__, current_entitled, current_weight);
+
+	pr_debug("%s: new_entitled = %lu, new_weight = %lu\n",
+		 __FUNCTION__, *new_entitled_ptr, *new_weight_ptr);
+
+	retval = plpar_hcall_norets(H_SET_PPP, *new_entitled_ptr,
+				    *new_weight_ptr);
+
+	if (retval == H_Success || retval == H_Constrained) {
+		retval = count;
+	} else if (retval == H_Busy) {
+		retval = -EBUSY;
+	} else if (retval == H_Hardware) {
+		retval = -EIO;
+	} else if (retval == H_Parameter) {
+		retval = -EINVAL;
+	} else {
+		printk(KERN_WARNING "%s: received unknown hv return code %ld",
+		       __FUNCTION__, retval);
+		retval = -EIO;
+	}
+
+      out:
+	kfree(kbuf);
+	return retval;
+}
+
+#endif				/* CONFIG_PPC_PSERIES */
+
+static int lparcfg_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, lparcfg_data, NULL);
+}
+
+struct file_operations lparcfg_fops = {
+      .owner	= THIS_MODULE,
+      .read	= seq_read,
+      .open	= lparcfg_open,
+      .release	= single_release,
+};
+
+int __init lparcfg_init(void)
+{
+	struct proc_dir_entry *ent;
+	mode_t mode = S_IRUSR | S_IRGRP | S_IROTH;
+
+	/* Allow writing if we have FW_FEATURE_SPLPAR */
+	if (firmware_has_feature(FW_FEATURE_SPLPAR)) {
+		lparcfg_fops.write = lparcfg_write;
+		mode |= S_IWUSR;
+	}
+
+	ent = create_proc_entry("ppc64/lparcfg", mode, NULL);
+	if (ent) {
+		ent->proc_fops = &lparcfg_fops;
+		ent->data = kmalloc(LPARCFG_BUFF_SIZE, GFP_KERNEL);
+		if (!ent->data) {
+			printk(KERN_ERR
+			       "Failed to allocate buffer for lparcfg\n");
+			remove_proc_entry("lparcfg", ent->parent);
+			return -ENOMEM;
+		}
+	} else {
+		printk(KERN_ERR "Failed to create ppc64/lparcfg\n");
+		return -EIO;
+	}
+
+	proc_ppc64_lparcfg = ent;
+	return 0;
+}
+
+void __exit lparcfg_cleanup(void)
+{
+	if (proc_ppc64_lparcfg) {
+		kfree(proc_ppc64_lparcfg->data);
+		remove_proc_entry("lparcfg", proc_ppc64_lparcfg->parent);
+	}
+}
+
+module_init(lparcfg_init);
+module_exit(lparcfg_cleanup);
+MODULE_DESCRIPTION("Interface for LPAR configuration data");
+MODULE_AUTHOR("Dave Engebretsen");
+MODULE_LICENSE("GPL");
diff --git a/arch/powerpc/kernel/proc_ppc64.c b/arch/powerpc/kernel/proc_ppc64.c
new file mode 100644
index 0000000..a1c1950
--- /dev/null
+++ b/arch/powerpc/kernel/proc_ppc64.c
@@ -0,0 +1,126 @@
+/*
+ * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/proc_fs.h>
+#include <linux/slab.h>
+#include <linux/kernel.h>
+
+#include <asm/systemcfg.h>
+#include <asm/rtas.h>
+#include <asm/uaccess.h>
+#include <asm/prom.h>
+
+static loff_t  page_map_seek( struct file *file, loff_t off, int whence);
+static ssize_t page_map_read( struct file *file, char __user *buf, size_t nbytes,
+			      loff_t *ppos);
+static int     page_map_mmap( struct file *file, struct vm_area_struct *vma );
+
+static struct file_operations page_map_fops = {
+	.llseek	= page_map_seek,
+	.read	= page_map_read,
+	.mmap	= page_map_mmap
+};
+
+/*
+ * Create the ppc64 and ppc64/rtas directories early. This allows us to
+ * assume that they have been previously created in drivers.
+ */
+static int __init proc_ppc64_create(void)
+{
+	struct proc_dir_entry *root;
+
+	root = proc_mkdir("ppc64", NULL);
+	if (!root)
+		return 1;
+
+	if (!(platform_is_pseries() || _machine == PLATFORM_CELL))
+		return 0;
+
+	if (!proc_mkdir("rtas", root))
+		return 1;
+
+	if (!proc_symlink("rtas", NULL, "ppc64/rtas"))
+		return 1;
+
+	return 0;
+}
+core_initcall(proc_ppc64_create);
+
+static int __init proc_ppc64_init(void)
+{
+	struct proc_dir_entry *pde;
+
+	pde = create_proc_entry("ppc64/systemcfg", S_IFREG|S_IRUGO, NULL);
+	if (!pde)
+		return 1;
+	pde->nlink = 1;
+	pde->data = _systemcfg;
+	pde->size = PAGE_SIZE;
+	pde->proc_fops = &page_map_fops;
+
+	return 0;
+}
+__initcall(proc_ppc64_init);
+
+static loff_t page_map_seek( struct file *file, loff_t off, int whence)
+{
+	loff_t new;
+	struct proc_dir_entry *dp = PDE(file->f_dentry->d_inode);
+
+	switch(whence) {
+	case 0:
+		new = off;
+		break;
+	case 1:
+		new = file->f_pos + off;
+		break;
+	case 2:
+		new = dp->size + off;
+		break;
+	default:
+		return -EINVAL;
+	}
+	if ( new < 0 || new > dp->size )
+		return -EINVAL;
+	return (file->f_pos = new);
+}
+
+static ssize_t page_map_read( struct file *file, char __user *buf, size_t nbytes,
+			      loff_t *ppos)
+{
+	struct proc_dir_entry *dp = PDE(file->f_dentry->d_inode);
+	return simple_read_from_buffer(buf, nbytes, ppos, dp->data, dp->size);
+}
+
+static int page_map_mmap( struct file *file, struct vm_area_struct *vma )
+{
+	struct proc_dir_entry *dp = PDE(file->f_dentry->d_inode);
+
+	vma->vm_flags |= VM_SHM | VM_LOCKED;
+
+	if ((vma->vm_end - vma->vm_start) > dp->size)
+		return -EINVAL;
+
+	remap_pfn_range(vma, vma->vm_start, __pa(dp->data) >> PAGE_SHIFT,
+						dp->size, vma->vm_page_prot);
+	return 0;
+}
+
diff --git a/arch/powerpc/kernel/rtas_pci.c b/arch/powerpc/kernel/rtas_pci.c
new file mode 100644
index 0000000..0e5a8e1
--- /dev/null
+++ b/arch/powerpc/kernel/rtas_pci.c
@@ -0,0 +1,513 @@
+/*
+ * arch/ppc64/kernel/rtas_pci.c
+ *
+ * Copyright (C) 2001 Dave Engebretsen, IBM Corporation
+ * Copyright (C) 2003 Anton Blanchard <anton@au.ibm.com>, IBM
+ *
+ * RTAS specific routines for PCI.
+ *
+ * Based on code from pci.c, chrp_pci.c and pSeries_pci.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/threads.h>
+#include <linux/pci.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/irq.h>
+#include <asm/prom.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <asm/iommu.h>
+#include <asm/rtas.h>
+#include <asm/mpic.h>
+#include <asm/ppc-pci.h>
+
+/* RTAS tokens */
+static int read_pci_config;
+static int write_pci_config;
+static int ibm_read_pci_config;
+static int ibm_write_pci_config;
+
+static inline int config_access_valid(struct pci_dn *dn, int where)
+{
+	if (where < 256)
+		return 1;
+	if (where < 4096 && dn->pci_ext_config_space)
+		return 1;
+
+	return 0;
+}
+
+static int of_device_available(struct device_node * dn)
+{
+        char * status;
+
+        status = get_property(dn, "status", NULL);
+
+        if (!status)
+                return 1;
+
+        if (!strcmp(status, "okay"))
+                return 1;
+
+        return 0;
+}
+
+static int rtas_read_config(struct pci_dn *pdn, int where, int size, u32 *val)
+{
+	int returnval = -1;
+	unsigned long buid, addr;
+	int ret;
+
+	if (!pdn)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	if (!config_access_valid(pdn, where))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+
+	addr = ((where & 0xf00) << 20) | (pdn->busno << 16) |
+		(pdn->devfn << 8) | (where & 0xff);
+	buid = pdn->phb->buid;
+	if (buid) {
+		ret = rtas_call(ibm_read_pci_config, 4, 2, &returnval,
+				addr, BUID_HI(buid), BUID_LO(buid), size);
+	} else {
+		ret = rtas_call(read_pci_config, 2, 2, &returnval, addr, size);
+	}
+	*val = returnval;
+
+	if (ret)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	if (returnval == EEH_IO_ERROR_VALUE(size) &&
+	    eeh_dn_check_failure (pdn->node, NULL))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int rtas_pci_read_config(struct pci_bus *bus,
+				unsigned int devfn,
+				int where, int size, u32 *val)
+{
+	struct device_node *busdn, *dn;
+
+	if (bus->self)
+		busdn = pci_device_to_OF_node(bus->self);
+	else
+		busdn = bus->sysdata;	/* must be a phb */
+
+	/* Search only direct children of the bus */
+	for (dn = busdn->child; dn; dn = dn->sibling) {
+		struct pci_dn *pdn = PCI_DN(dn);
+		if (pdn && pdn->devfn == devfn
+		    && of_device_available(dn))
+			return rtas_read_config(pdn, where, size, val);
+	}
+
+	return PCIBIOS_DEVICE_NOT_FOUND;
+}
+
+int rtas_write_config(struct pci_dn *pdn, int where, int size, u32 val)
+{
+	unsigned long buid, addr;
+	int ret;
+
+	if (!pdn)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	if (!config_access_valid(pdn, where))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+
+	addr = ((where & 0xf00) << 20) | (pdn->busno << 16) |
+		(pdn->devfn << 8) | (where & 0xff);
+	buid = pdn->phb->buid;
+	if (buid) {
+		ret = rtas_call(ibm_write_pci_config, 5, 1, NULL, addr,
+			BUID_HI(buid), BUID_LO(buid), size, (ulong) val);
+	} else {
+		ret = rtas_call(write_pci_config, 3, 1, NULL, addr, size, (ulong)val);
+	}
+
+	if (ret)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int rtas_pci_write_config(struct pci_bus *bus,
+				 unsigned int devfn,
+				 int where, int size, u32 val)
+{
+	struct device_node *busdn, *dn;
+
+	if (bus->self)
+		busdn = pci_device_to_OF_node(bus->self);
+	else
+		busdn = bus->sysdata;	/* must be a phb */
+
+	/* Search only direct children of the bus */
+	for (dn = busdn->child; dn; dn = dn->sibling) {
+		struct pci_dn *pdn = PCI_DN(dn);
+		if (pdn && pdn->devfn == devfn
+		    && of_device_available(dn))
+			return rtas_write_config(pdn, where, size, val);
+	}
+	return PCIBIOS_DEVICE_NOT_FOUND;
+}
+
+struct pci_ops rtas_pci_ops = {
+	rtas_pci_read_config,
+	rtas_pci_write_config
+};
+
+int is_python(struct device_node *dev)
+{
+	char *model = (char *)get_property(dev, "model", NULL);
+
+	if (model && strstr(model, "Python"))
+		return 1;
+
+	return 0;
+}
+
+static int get_phb_reg_prop(struct device_node *dev,
+			    unsigned int addr_size_words,
+			    struct reg_property64 *reg)
+{
+	unsigned int *ui_ptr = NULL, len;
+
+	/* Found a PHB, now figure out where his registers are mapped. */
+	ui_ptr = (unsigned int *)get_property(dev, "reg", &len);
+	if (ui_ptr == NULL)
+		return 1;
+
+	if (addr_size_words == 1) {
+		reg->address = ((struct reg_property32 *)ui_ptr)->address;
+		reg->size    = ((struct reg_property32 *)ui_ptr)->size;
+	} else {
+		*reg = *((struct reg_property64 *)ui_ptr);
+	}
+
+	return 0;
+}
+
+static void python_countermeasures(struct device_node *dev,
+				   unsigned int addr_size_words)
+{
+	struct reg_property64 reg_struct;
+	void __iomem *chip_regs;
+	volatile u32 val;
+
+	if (get_phb_reg_prop(dev, addr_size_words, &reg_struct))
+		return;
+
+	/* Python's register file is 1 MB in size. */
+	chip_regs = ioremap(reg_struct.address & ~(0xfffffUL), 0x100000);
+
+	/*
+	 * Firmware doesn't always clear this bit which is critical
+	 * for good performance - Anton
+	 */
+
+#define PRG_CL_RESET_VALID 0x00010000
+
+	val = in_be32(chip_regs + 0xf6030);
+	if (val & PRG_CL_RESET_VALID) {
+		printk(KERN_INFO "Python workaround: ");
+		val &= ~PRG_CL_RESET_VALID;
+		out_be32(chip_regs + 0xf6030, val);
+		/*
+		 * We must read it back for changes to
+		 * take effect
+		 */
+		val = in_be32(chip_regs + 0xf6030);
+		printk("reg0: %x\n", val);
+	}
+
+	iounmap(chip_regs);
+}
+
+void __init init_pci_config_tokens (void)
+{
+	read_pci_config = rtas_token("read-pci-config");
+	write_pci_config = rtas_token("write-pci-config");
+	ibm_read_pci_config = rtas_token("ibm,read-pci-config");
+	ibm_write_pci_config = rtas_token("ibm,write-pci-config");
+}
+
+unsigned long __devinit get_phb_buid (struct device_node *phb)
+{
+	int addr_cells;
+	unsigned int *buid_vals;
+	unsigned int len;
+	unsigned long buid;
+
+	if (ibm_read_pci_config == -1) return 0;
+
+	/* PHB's will always be children of the root node,
+	 * or so it is promised by the current firmware. */
+	if (phb->parent == NULL)
+		return 0;
+	if (phb->parent->parent)
+		return 0;
+
+	buid_vals = (unsigned int *) get_property(phb, "reg", &len);
+	if (buid_vals == NULL)
+		return 0;
+
+	addr_cells = prom_n_addr_cells(phb);
+	if (addr_cells == 1) {
+		buid = (unsigned long) buid_vals[0];
+	} else {
+		buid = (((unsigned long)buid_vals[0]) << 32UL) |
+			(((unsigned long)buid_vals[1]) & 0xffffffff);
+	}
+	return buid;
+}
+
+static int phb_set_bus_ranges(struct device_node *dev,
+			      struct pci_controller *phb)
+{
+	int *bus_range;
+	unsigned int len;
+
+	bus_range = (int *) get_property(dev, "bus-range", &len);
+	if (bus_range == NULL || len < 2 * sizeof(int)) {
+		return 1;
+ 	}
+
+	phb->first_busno =  bus_range[0];
+	phb->last_busno  =  bus_range[1];
+
+	return 0;
+}
+
+static int __devinit setup_phb(struct device_node *dev,
+			       struct pci_controller *phb,
+			       unsigned int addr_size_words)
+{
+	pci_setup_pci_controller(phb);
+
+	if (is_python(dev))
+		python_countermeasures(dev, addr_size_words);
+
+	if (phb_set_bus_ranges(dev, phb))
+		return 1;
+
+	phb->arch_data = dev;
+	phb->ops = &rtas_pci_ops;
+	phb->buid = get_phb_buid(dev);
+
+	return 0;
+}
+
+static void __devinit add_linux_pci_domain(struct device_node *dev,
+					   struct pci_controller *phb,
+					   struct property *of_prop)
+{
+	memset(of_prop, 0, sizeof(struct property));
+	of_prop->name = "linux,pci-domain";
+	of_prop->length = sizeof(phb->global_number);
+	of_prop->value = (unsigned char *)&of_prop[1];
+	memcpy(of_prop->value, &phb->global_number, sizeof(phb->global_number));
+	prom_add_property(dev, of_prop);
+}
+
+static struct pci_controller * __init alloc_phb(struct device_node *dev,
+						unsigned int addr_size_words)
+{
+	struct pci_controller *phb;
+	struct property *of_prop;
+
+	phb = alloc_bootmem(sizeof(struct pci_controller));
+	if (phb == NULL)
+		return NULL;
+
+	of_prop = alloc_bootmem(sizeof(struct property) +
+				sizeof(phb->global_number));
+	if (!of_prop)
+		return NULL;
+
+	if (setup_phb(dev, phb, addr_size_words))
+		return NULL;
+
+	add_linux_pci_domain(dev, phb, of_prop);
+
+	return phb;
+}
+
+static struct pci_controller * __devinit alloc_phb_dynamic(struct device_node *dev, unsigned int addr_size_words)
+{
+	struct pci_controller *phb;
+
+	phb = (struct pci_controller *)kmalloc(sizeof(struct pci_controller),
+					       GFP_KERNEL);
+	if (phb == NULL)
+		return NULL;
+
+	if (setup_phb(dev, phb, addr_size_words))
+		return NULL;
+
+	phb->is_dynamic = 1;
+
+	/* TODO: linux,pci-domain? */
+
+ 	return phb;
+}
+
+unsigned long __init find_and_init_phbs(void)
+{
+	struct device_node *node;
+	struct pci_controller *phb;
+	unsigned int root_size_cells = 0;
+	unsigned int index;
+	unsigned int *opprop = NULL;
+	struct device_node *root = of_find_node_by_path("/");
+
+	if (ppc64_interrupt_controller == IC_OPEN_PIC) {
+		opprop = (unsigned int *)get_property(root,
+				"platform-open-pic", NULL);
+	}
+
+	root_size_cells = prom_n_size_cells(root);
+
+	index = 0;
+
+	for (node = of_get_next_child(root, NULL);
+	     node != NULL;
+	     node = of_get_next_child(root, node)) {
+		if (node->type == NULL || strcmp(node->type, "pci") != 0)
+			continue;
+
+		phb = alloc_phb(node, root_size_cells);
+		if (!phb)
+			continue;
+
+		pci_process_bridge_OF_ranges(phb, node, 0);
+		pci_setup_phb_io(phb, index == 0);
+#ifdef CONFIG_PPC_PSERIES
+		if (ppc64_interrupt_controller == IC_OPEN_PIC && pSeries_mpic) {
+			int addr = root_size_cells * (index + 2) - 1;
+			mpic_assign_isu(pSeries_mpic, index, opprop[addr]);
+		}
+#endif
+		index++;
+	}
+
+	of_node_put(root);
+	pci_devs_phb_init();
+
+	/*
+	 * pci_probe_only and pci_assign_all_buses can be set via properties
+	 * in chosen.
+	 */
+	if (of_chosen) {
+		int *prop;
+
+		prop = (int *)get_property(of_chosen, "linux,pci-probe-only",
+					   NULL);
+		if (prop)
+			pci_probe_only = *prop;
+
+		prop = (int *)get_property(of_chosen,
+					   "linux,pci-assign-all-buses", NULL);
+		if (prop)
+			pci_assign_all_buses = *prop;
+	}
+
+	return 0;
+}
+
+struct pci_controller * __devinit init_phb_dynamic(struct device_node *dn)
+{
+	struct device_node *root = of_find_node_by_path("/");
+	unsigned int root_size_cells = 0;
+	struct pci_controller *phb;
+	int primary;
+
+	root_size_cells = prom_n_size_cells(root);
+
+	primary = list_empty(&hose_list);
+	phb = alloc_phb_dynamic(dn, root_size_cells);
+	if (!phb)
+		return NULL;
+
+	pci_process_bridge_OF_ranges(phb, dn, primary);
+
+	pci_setup_phb_io_dynamic(phb, primary);
+	of_node_put(root);
+
+	pci_devs_phb_init_dynamic(phb);
+	scan_phb(phb);
+
+	return phb;
+}
+EXPORT_SYMBOL(init_phb_dynamic);
+
+/* RPA-specific bits for removing PHBs */
+int pcibios_remove_root_bus(struct pci_controller *phb)
+{
+	struct pci_bus *b = phb->bus;
+	struct resource *res;
+	int rc, i;
+
+	res = b->resource[0];
+	if (!res->flags) {
+		printk(KERN_ERR "%s: no IO resource for PHB %s\n", __FUNCTION__,
+				b->name);
+		return 1;
+	}
+
+	rc = unmap_bus_range(b);
+	if (rc) {
+		printk(KERN_ERR "%s: failed to unmap IO on bus %s\n",
+			__FUNCTION__, b->name);
+		return 1;
+	}
+
+	if (release_resource(res)) {
+		printk(KERN_ERR "%s: failed to release IO on bus %s\n",
+				__FUNCTION__, b->name);
+		return 1;
+	}
+
+	for (i = 1; i < 3; ++i) {
+		res = b->resource[i];
+		if (!res->flags && i == 0) {
+			printk(KERN_ERR "%s: no MEM resource for PHB %s\n",
+				__FUNCTION__, b->name);
+			return 1;
+		}
+		if (res->flags && release_resource(res)) {
+			printk(KERN_ERR
+			       "%s: failed to release IO %d on bus %s\n",
+				__FUNCTION__, i, b->name);
+			return 1;
+		}
+	}
+
+	list_del(&phb->list_node);
+	if (phb->is_dynamic)
+		kfree(phb);
+
+	return 0;
+}
+EXPORT_SYMBOL(pcibios_remove_root_bus);
diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c
new file mode 100644
index 0000000..850af19
--- /dev/null
+++ b/arch/powerpc/kernel/sysfs.c
@@ -0,0 +1,384 @@
+#include <linux/config.h>
+#include <linux/sysdev.h>
+#include <linux/cpu.h>
+#include <linux/smp.h>
+#include <linux/percpu.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/module.h>
+#include <linux/nodemask.h>
+#include <linux/cpumask.h>
+#include <linux/notifier.h>
+
+#include <asm/current.h>
+#include <asm/processor.h>
+#include <asm/cputable.h>
+#include <asm/firmware.h>
+#include <asm/hvcall.h>
+#include <asm/prom.h>
+#include <asm/systemcfg.h>
+#include <asm/paca.h>
+#include <asm/lppaca.h>
+#include <asm/machdep.h>
+#include <asm/smp.h>
+
+static DEFINE_PER_CPU(struct cpu, cpu_devices);
+
+/* SMT stuff */
+
+#ifdef CONFIG_PPC_MULTIPLATFORM
+/* default to snooze disabled */
+DEFINE_PER_CPU(unsigned long, smt_snooze_delay);
+
+static ssize_t store_smt_snooze_delay(struct sys_device *dev, const char *buf,
+				      size_t count)
+{
+	struct cpu *cpu = container_of(dev, struct cpu, sysdev);
+	ssize_t ret;
+	unsigned long snooze;
+
+	ret = sscanf(buf, "%lu", &snooze);
+	if (ret != 1)
+		return -EINVAL;
+
+	per_cpu(smt_snooze_delay, cpu->sysdev.id) = snooze;
+
+	return count;
+}
+
+static ssize_t show_smt_snooze_delay(struct sys_device *dev, char *buf)
+{
+	struct cpu *cpu = container_of(dev, struct cpu, sysdev);
+
+	return sprintf(buf, "%lu\n", per_cpu(smt_snooze_delay, cpu->sysdev.id));
+}
+
+static SYSDEV_ATTR(smt_snooze_delay, 0644, show_smt_snooze_delay,
+		   store_smt_snooze_delay);
+
+/* Only parse OF options if the matching cmdline option was not specified */
+static int smt_snooze_cmdline;
+
+static int __init smt_setup(void)
+{
+	struct device_node *options;
+	unsigned int *val;
+	unsigned int cpu;
+
+	if (!cpu_has_feature(CPU_FTR_SMT))
+		return 1;
+
+	options = find_path_device("/options");
+	if (!options)
+		return 1;
+
+	val = (unsigned int *)get_property(options, "ibm,smt-snooze-delay",
+					   NULL);
+	if (!smt_snooze_cmdline && val) {
+		for_each_cpu(cpu)
+			per_cpu(smt_snooze_delay, cpu) = *val;
+	}
+
+	return 1;
+}
+__initcall(smt_setup);
+
+static int __init setup_smt_snooze_delay(char *str)
+{
+	unsigned int cpu;
+	int snooze;
+
+	if (!cpu_has_feature(CPU_FTR_SMT))
+		return 1;
+
+	smt_snooze_cmdline = 1;
+
+	if (get_option(&str, &snooze)) {
+		for_each_cpu(cpu)
+			per_cpu(smt_snooze_delay, cpu) = snooze;
+	}
+
+	return 1;
+}
+__setup("smt-snooze-delay=", setup_smt_snooze_delay);
+
+#endif /* CONFIG_PPC_MULTIPLATFORM */
+
+/*
+ * Enabling PMCs will slow partition context switch times so we only do
+ * it the first time we write to the PMCs.
+ */
+
+static DEFINE_PER_CPU(char, pmcs_enabled);
+
+void ppc64_enable_pmcs(void)
+{
+	/* Only need to enable them once */
+	if (__get_cpu_var(pmcs_enabled))
+		return;
+
+	__get_cpu_var(pmcs_enabled) = 1;
+
+	if (ppc_md.enable_pmcs)
+		ppc_md.enable_pmcs();
+}
+EXPORT_SYMBOL(ppc64_enable_pmcs);
+
+/* XXX convert to rusty's on_one_cpu */
+static unsigned long run_on_cpu(unsigned long cpu,
+			        unsigned long (*func)(unsigned long),
+				unsigned long arg)
+{
+	cpumask_t old_affinity = current->cpus_allowed;
+	unsigned long ret;
+
+	/* should return -EINVAL to userspace */
+	if (set_cpus_allowed(current, cpumask_of_cpu(cpu)))
+		return 0;
+
+	ret = func(arg);
+
+	set_cpus_allowed(current, old_affinity);
+
+	return ret;
+}
+
+#define SYSFS_PMCSETUP(NAME, ADDRESS) \
+static unsigned long read_##NAME(unsigned long junk) \
+{ \
+	return mfspr(ADDRESS); \
+} \
+static unsigned long write_##NAME(unsigned long val) \
+{ \
+	ppc64_enable_pmcs(); \
+	mtspr(ADDRESS, val); \
+	return 0; \
+} \
+static ssize_t show_##NAME(struct sys_device *dev, char *buf) \
+{ \
+	struct cpu *cpu = container_of(dev, struct cpu, sysdev); \
+	unsigned long val = run_on_cpu(cpu->sysdev.id, read_##NAME, 0); \
+	return sprintf(buf, "%lx\n", val); \
+} \
+static ssize_t __attribute_used__ \
+	store_##NAME(struct sys_device *dev, const char *buf, size_t count) \
+{ \
+	struct cpu *cpu = container_of(dev, struct cpu, sysdev); \
+	unsigned long val; \
+	int ret = sscanf(buf, "%lx", &val); \
+	if (ret != 1) \
+		return -EINVAL; \
+	run_on_cpu(cpu->sysdev.id, write_##NAME, val); \
+	return count; \
+}
+
+SYSFS_PMCSETUP(mmcr0, SPRN_MMCR0);
+SYSFS_PMCSETUP(mmcr1, SPRN_MMCR1);
+SYSFS_PMCSETUP(mmcra, SPRN_MMCRA);
+SYSFS_PMCSETUP(pmc1, SPRN_PMC1);
+SYSFS_PMCSETUP(pmc2, SPRN_PMC2);
+SYSFS_PMCSETUP(pmc3, SPRN_PMC3);
+SYSFS_PMCSETUP(pmc4, SPRN_PMC4);
+SYSFS_PMCSETUP(pmc5, SPRN_PMC5);
+SYSFS_PMCSETUP(pmc6, SPRN_PMC6);
+SYSFS_PMCSETUP(pmc7, SPRN_PMC7);
+SYSFS_PMCSETUP(pmc8, SPRN_PMC8);
+SYSFS_PMCSETUP(purr, SPRN_PURR);
+
+static SYSDEV_ATTR(mmcr0, 0600, show_mmcr0, store_mmcr0);
+static SYSDEV_ATTR(mmcr1, 0600, show_mmcr1, store_mmcr1);
+static SYSDEV_ATTR(mmcra, 0600, show_mmcra, store_mmcra);
+static SYSDEV_ATTR(pmc1, 0600, show_pmc1, store_pmc1);
+static SYSDEV_ATTR(pmc2, 0600, show_pmc2, store_pmc2);
+static SYSDEV_ATTR(pmc3, 0600, show_pmc3, store_pmc3);
+static SYSDEV_ATTR(pmc4, 0600, show_pmc4, store_pmc4);
+static SYSDEV_ATTR(pmc5, 0600, show_pmc5, store_pmc5);
+static SYSDEV_ATTR(pmc6, 0600, show_pmc6, store_pmc6);
+static SYSDEV_ATTR(pmc7, 0600, show_pmc7, store_pmc7);
+static SYSDEV_ATTR(pmc8, 0600, show_pmc8, store_pmc8);
+static SYSDEV_ATTR(purr, 0600, show_purr, NULL);
+
+static void register_cpu_online(unsigned int cpu)
+{
+	struct cpu *c = &per_cpu(cpu_devices, cpu);
+	struct sys_device *s = &c->sysdev;
+
+#ifndef CONFIG_PPC_ISERIES
+	if (cpu_has_feature(CPU_FTR_SMT))
+		sysdev_create_file(s, &attr_smt_snooze_delay);
+#endif
+
+	/* PMC stuff */
+
+	sysdev_create_file(s, &attr_mmcr0);
+	sysdev_create_file(s, &attr_mmcr1);
+
+	if (cpu_has_feature(CPU_FTR_MMCRA))
+		sysdev_create_file(s, &attr_mmcra);
+
+	if (cur_cpu_spec->num_pmcs >= 1)
+		sysdev_create_file(s, &attr_pmc1);
+	if (cur_cpu_spec->num_pmcs >= 2)
+		sysdev_create_file(s, &attr_pmc2);
+	if (cur_cpu_spec->num_pmcs >= 3)
+		sysdev_create_file(s, &attr_pmc3);
+	if (cur_cpu_spec->num_pmcs >= 4)
+		sysdev_create_file(s, &attr_pmc4);
+	if (cur_cpu_spec->num_pmcs >= 5)
+		sysdev_create_file(s, &attr_pmc5);
+	if (cur_cpu_spec->num_pmcs >= 6)
+		sysdev_create_file(s, &attr_pmc6);
+	if (cur_cpu_spec->num_pmcs >= 7)
+		sysdev_create_file(s, &attr_pmc7);
+	if (cur_cpu_spec->num_pmcs >= 8)
+		sysdev_create_file(s, &attr_pmc8);
+
+	if (cpu_has_feature(CPU_FTR_SMT))
+		sysdev_create_file(s, &attr_purr);
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+static void unregister_cpu_online(unsigned int cpu)
+{
+	struct cpu *c = &per_cpu(cpu_devices, cpu);
+	struct sys_device *s = &c->sysdev;
+
+	BUG_ON(c->no_control);
+
+#ifndef CONFIG_PPC_ISERIES
+	if (cpu_has_feature(CPU_FTR_SMT))
+		sysdev_remove_file(s, &attr_smt_snooze_delay);
+#endif
+
+	/* PMC stuff */
+
+	sysdev_remove_file(s, &attr_mmcr0);
+	sysdev_remove_file(s, &attr_mmcr1);
+
+	if (cpu_has_feature(CPU_FTR_MMCRA))
+		sysdev_remove_file(s, &attr_mmcra);
+
+	if (cur_cpu_spec->num_pmcs >= 1)
+		sysdev_remove_file(s, &attr_pmc1);
+	if (cur_cpu_spec->num_pmcs >= 2)
+		sysdev_remove_file(s, &attr_pmc2);
+	if (cur_cpu_spec->num_pmcs >= 3)
+		sysdev_remove_file(s, &attr_pmc3);
+	if (cur_cpu_spec->num_pmcs >= 4)
+		sysdev_remove_file(s, &attr_pmc4);
+	if (cur_cpu_spec->num_pmcs >= 5)
+		sysdev_remove_file(s, &attr_pmc5);
+	if (cur_cpu_spec->num_pmcs >= 6)
+		sysdev_remove_file(s, &attr_pmc6);
+	if (cur_cpu_spec->num_pmcs >= 7)
+		sysdev_remove_file(s, &attr_pmc7);
+	if (cur_cpu_spec->num_pmcs >= 8)
+		sysdev_remove_file(s, &attr_pmc8);
+
+	if (cpu_has_feature(CPU_FTR_SMT))
+		sysdev_remove_file(s, &attr_purr);
+}
+#endif /* CONFIG_HOTPLUG_CPU */
+
+static int __devinit sysfs_cpu_notify(struct notifier_block *self,
+				      unsigned long action, void *hcpu)
+{
+	unsigned int cpu = (unsigned int)(long)hcpu;
+
+	switch (action) {
+	case CPU_ONLINE:
+		register_cpu_online(cpu);
+		break;
+#ifdef CONFIG_HOTPLUG_CPU
+	case CPU_DEAD:
+		unregister_cpu_online(cpu);
+		break;
+#endif
+	}
+	return NOTIFY_OK;
+}
+
+static struct notifier_block __devinitdata sysfs_cpu_nb = {
+	.notifier_call	= sysfs_cpu_notify,
+};
+
+/* NUMA stuff */
+
+#ifdef CONFIG_NUMA
+static struct node node_devices[MAX_NUMNODES];
+
+static void register_nodes(void)
+{
+	int i;
+
+	for (i = 0; i < MAX_NUMNODES; i++) {
+		if (node_online(i)) {
+			int p_node = parent_node(i);
+			struct node *parent = NULL;
+
+			if (p_node != i)
+				parent = &node_devices[p_node];
+
+			register_node(&node_devices[i], i, parent);
+		}
+	}
+}
+#else
+static void register_nodes(void)
+{
+	return;
+}
+#endif
+
+/* Only valid if CPU is present. */
+static ssize_t show_physical_id(struct sys_device *dev, char *buf)
+{
+	struct cpu *cpu = container_of(dev, struct cpu, sysdev);
+
+	return sprintf(buf, "%d\n", get_hard_smp_processor_id(cpu->sysdev.id));
+}
+static SYSDEV_ATTR(physical_id, 0444, show_physical_id, NULL);
+
+static int __init topology_init(void)
+{
+	int cpu;
+	struct node *parent = NULL;
+
+	register_nodes();
+
+	register_cpu_notifier(&sysfs_cpu_nb);
+
+	for_each_cpu(cpu) {
+		struct cpu *c = &per_cpu(cpu_devices, cpu);
+
+#ifdef CONFIG_NUMA
+		/* The node to which a cpu belongs can't be known
+		 * until the cpu is made present.
+		 */
+		parent = NULL;
+		if (cpu_present(cpu))
+			parent = &node_devices[cpu_to_node(cpu)];
+#endif
+		/*
+		 * For now, we just see if the system supports making
+		 * the RTAS calls for CPU hotplug.  But, there may be a
+		 * more comprehensive way to do this for an individual
+		 * CPU.  For instance, the boot cpu might never be valid
+		 * for hotplugging.
+		 */
+		if (!ppc_md.cpu_die)
+			c->no_control = 1;
+
+		if (cpu_online(cpu) || (c->no_control == 0)) {
+			register_cpu(c, cpu, parent);
+
+			sysdev_create_file(&c->sysdev, &attr_physical_id);
+		}
+
+		if (cpu_online(cpu))
+			register_cpu_online(cpu);
+	}
+
+	return 0;
+}
+__initcall(topology_init);
-- 
cgit v1.1


From 49b09853df1a303876b82a6480efb2f7b45ef041 Mon Sep 17 00:00:00 2001
From: Paul Mackerras <paulus@samba.org>
Date: Thu, 10 Nov 2005 15:53:40 +1100
Subject: powerpc: Move some extern declarations from C code into headers

This also make klimit have the same type on 32-bit as on 64-bit,
namely unsigned long, and defines and initializes it in one place.

Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/kernel/prom.c             | 4 ----
 arch/powerpc/kernel/setup-common.c     | 2 ++
 arch/powerpc/kernel/setup_32.c         | 3 +--
 arch/powerpc/kernel/setup_64.c         | 8 --------
 arch/powerpc/mm/init_32.c              | 3 ---
 arch/powerpc/mm/init_64.c              | 2 --
 arch/powerpc/platforms/iseries/setup.c | 3 +--
 7 files changed, 4 insertions(+), 21 deletions(-)

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 1bf3642..6391a4a 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -71,10 +71,6 @@ struct isa_reg_property {
 typedef int interpret_func(struct device_node *, unsigned long *,
 			   int, int, int);
 
-extern struct rtas_t rtas;
-extern struct lmb lmb;
-extern unsigned long klimit;
-
 static int __initdata dt_root_addr_cells;
 static int __initdata dt_root_size_cells;
 
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 06e4ef2..bae4bff 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -69,6 +69,8 @@ int _machine = 0;
 EXPORT_SYMBOL(_machine);
 #endif
 
+unsigned long klimit = (unsigned long) _end;
+
 /*
  * This still seems to be needed... -- paulus
  */ 
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index f73d768..c98cfcc 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -279,7 +279,6 @@ arch_initcall(ppc_init);
 /* Warning, IO base is not yet inited */
 void __init setup_arch(char **cmdline_p)
 {
-	extern char *klimit;
 	extern void do_init_bootmem(void);
 
 	/* so udelay does something sensible, assume <= 1000 bogomips */
@@ -338,7 +337,7 @@ void __init setup_arch(char **cmdline_p)
 	init_mm.start_code = PAGE_OFFSET;
 	init_mm.end_code = (unsigned long) _etext;
 	init_mm.end_data = (unsigned long) _edata;
-	init_mm.brk = (unsigned long) klimit;
+	init_mm.brk = klimit;
 
 	/* Save unparsed command line copy for /proc/cmdline */
 	strlcpy(saved_command_line, cmd_line, COMMAND_LINE_SIZE);
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index be607b8..6791668 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -96,14 +96,6 @@ extern void udbg_init_maple_realmode(void);
 	do { udbg_putc = call_rtas_display_status_delay; } while(0)
 #endif
 
-/* extern void *stab; */
-extern unsigned long klimit;
-
-extern void mm_init_ppc64(void);
-extern void early_init_devtree(void *flat_dt);
-extern void unflatten_device_tree(void);
-extern void check_for_initrd(void);
-
 int have_of = 1;
 int boot_cpuid = 0;
 int boot_cpuid_phys = 0;
diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c
index 4612a79..7d4b8b5 100644
--- a/arch/powerpc/mm/init_32.c
+++ b/arch/powerpc/mm/init_32.c
@@ -84,9 +84,6 @@ void MMU_init(void);
 /* XXX should be in current.h  -- paulus */
 extern struct task_struct *current_set[NR_CPUS];
 
-char *klimit = _end;
-struct device_node *memory_node;
-
 extern int init_bootmem_done;
 
 /*
diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c
index e274cf10..1134f70 100644
--- a/arch/powerpc/mm/init_64.c
+++ b/arch/powerpc/mm/init_64.c
@@ -80,8 +80,6 @@
 #warning TASK_SIZE is smaller than it needs to be.
 #endif
 
-unsigned long klimit = (unsigned long)_end;
-
 /* max amount of RAM to use */
 unsigned long __max_memory;
 
diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c
index 623c39a..1f33834 100644
--- a/arch/powerpc/platforms/iseries/setup.c
+++ b/arch/powerpc/platforms/iseries/setup.c
@@ -40,7 +40,7 @@
 #include <asm/iommu.h>
 #include <asm/firmware.h>
 #include <asm/systemcfg.h>
-
+#include <asm/system.h>
 #include <asm/time.h>
 #include <asm/paca.h>
 #include <asm/cache.h>
@@ -85,7 +85,6 @@ static void iSeries_pci_final_fixup(void) { }
 int piranha_simulator;
 
 extern int rd_size;		/* Defined in drivers/block/rd.c */
-extern unsigned long klimit;
 extern unsigned long embedded_sysmap_start;
 extern unsigned long embedded_sysmap_end;
 
-- 
cgit v1.1


From d9564ad11454581f85b77026f290f4bb24eecf25 Mon Sep 17 00:00:00 2001
From: Linas Vepstas <linas@linas.org>
Date: Thu, 3 Nov 2005 18:50:48 -0600
Subject: [PATCH] ppc64: mark failed devices

17-eeh-slot-marking-bug.patch

A device that experiences a PCI outage may be just one deivce out
of many that was affected. In order to avoid repeated reports of
a failure, the entire tree of affected devices should be marked
as failed. This patch marks up the entire tree.

Signed-off-by: Linas Vepstas <linas@linas.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/platforms/pseries/eeh.c | 48 ++++++++++++++++++++++++------------
 1 file changed, 32 insertions(+), 16 deletions(-)

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index 3a857b2..79de231 100644
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -478,32 +478,47 @@ static struct device_node * find_device_pe(struct device_node *dn)
  *  an interrupt context, which is bad.
  */
 
-static void __eeh_mark_slot (struct device_node *dn)
+static void __eeh_mark_slot (struct device_node *dn, int mode_flag)
 {
 	while (dn) {
-		PCI_DN(dn)->eeh_mode |= EEH_MODE_ISOLATED;
+		if (PCI_DN(dn)) {
+			PCI_DN(dn)->eeh_mode |= mode_flag;
 
-		if (dn->child)
-			__eeh_mark_slot (dn->child);
+			if (dn->child)
+				__eeh_mark_slot (dn->child, mode_flag);
+		}
 		dn = dn->sibling;
 	}
 }
 
-static void __eeh_clear_slot (struct device_node *dn)
+void eeh_mark_slot (struct device_node *dn, int mode_flag)
+{
+	dn = find_device_pe (dn);
+	PCI_DN(dn)->eeh_mode |= mode_flag;
+	__eeh_mark_slot (dn->child, mode_flag);
+}
+
+static void __eeh_clear_slot (struct device_node *dn, int mode_flag)
 {
 	while (dn) {
-		PCI_DN(dn)->eeh_mode &= ~EEH_MODE_ISOLATED;
-		if (dn->child)
-			__eeh_clear_slot (dn->child);
+		if (PCI_DN(dn)) {
+			PCI_DN(dn)->eeh_mode &= ~mode_flag;
+			PCI_DN(dn)->eeh_check_count = 0;
+			if (dn->child)
+				__eeh_clear_slot (dn->child, mode_flag);
+		}
 		dn = dn->sibling;
 	}
 }
 
-static inline void eeh_clear_slot (struct device_node *dn)
+void eeh_clear_slot (struct device_node *dn, int mode_flag)
 {
 	unsigned long flags;
 	spin_lock_irqsave(&confirm_error_lock, flags);
-	__eeh_clear_slot (dn);
+	dn = find_device_pe (dn);
+	PCI_DN(dn)->eeh_mode &= ~mode_flag;
+	PCI_DN(dn)->eeh_check_count = 0;
+	__eeh_clear_slot (dn->child, mode_flag);
 	spin_unlock_irqrestore(&confirm_error_lock, flags);
 }
 
@@ -528,7 +543,6 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
 	int rets[3];
 	unsigned long flags;
 	struct pci_dn *pdn;
-	struct device_node *pe_dn;
 	int rc = 0;
 
 	__get_cpu_var(total_mmio_ffs)++;
@@ -630,8 +644,7 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
 	/* Avoid repeated reports of this failure, including problems
 	 * with other functions on this device, and functions under
 	 * bridges. */
-	pe_dn = find_device_pe (dn);
-	__eeh_mark_slot (pe_dn);
+	eeh_mark_slot (dn, EEH_MODE_ISOLATED);
 	spin_unlock_irqrestore(&confirm_error_lock, flags);
 
 	eeh_send_failure_event (dn, dev, rets[0], rets[2]);
@@ -743,9 +756,6 @@ rtas_pci_slot_reset(struct pci_dn *pdn, int state)
 		        rc, state, pdn->node->full_name);
 		return;
 	}
-
-	if (state == 0)
-		eeh_clear_slot (pdn->node->parent->child);
 }
 
 /** rtas_set_slot_reset -- assert the pci #RST line for 1/4 second
@@ -764,6 +774,12 @@ rtas_set_slot_reset(struct pci_dn *pdn)
 
 #define PCI_BUS_RST_HOLD_TIME_MSEC 250
 	msleep (PCI_BUS_RST_HOLD_TIME_MSEC);
+	
+	/* We might get hit with another EEH freeze as soon as the 
+	 * pci slot reset line is dropped. Make sure we don't miss
+	 * these, and clear the flag now. */
+	eeh_clear_slot (pdn->node, EEH_MODE_ISOLATED);
+
 	rtas_pci_slot_reset (pdn, 0);
 
 	/* After a PCI slot has been reset, the PCI Express spec requires
-- 
cgit v1.1