From 0de26520c7cabf36e1de090ea8092f011a6106ce Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Sat, 13 Dec 2008 21:20:26 +1030
Subject: cpumask: make irq_set_affinity() take a const struct cpumask
Impact: change existing irq_chip API
Not much point with gentle transition here: the struct irq_chip's
setaffinity method signature needs to change.
Fortunately, not widely used code, but hits a few architectures.
Note: In irq_select_affinity() I save a temporary in by mangling
irq_desc[irq].affinity directly. Ingo, does this break anything?
(Folded in fix from KOSAKI Motohiro)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Grant Grundler <grundler@parisc-linux.org>
Acked-by: Ingo Molnar <mingo@redhat.com>
Cc: ralf@linux-mips.org
Cc: grundler@parisc-linux.org
Cc: jeremy@xensource.com
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
---
arch/powerpc/sysdev/mpic.c | 4 ++--
arch/powerpc/sysdev/mpic.h | 2 +-
2 files changed, 3 insertions(+), 3 deletions(-)
(limited to 'arch/powerpc/sysdev')
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 1890fb0..5d7f9f0 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -817,7 +817,7 @@ static void mpic_end_ipi(unsigned int irq)
#endif /* CONFIG_SMP */
-void mpic_set_affinity(unsigned int irq, cpumask_t cpumask)
+void mpic_set_affinity(unsigned int irq, const struct cpumask *cpumask)
{
struct mpic *mpic = mpic_from_irq(irq);
unsigned int src = mpic_irq_to_hw(irq);
@@ -829,7 +829,7 @@ void mpic_set_affinity(unsigned int irq, cpumask_t cpumask)
} else {
cpumask_t tmp;
- cpus_and(tmp, cpumask, cpu_online_map);
+ cpumask_and(&tmp, cpumask, cpu_online_mask);
mpic_irq_write(src, MPIC_INFO(IRQ_DESTINATION),
mpic_physmask(cpus_addr(tmp)[0]));
diff --git a/arch/powerpc/sysdev/mpic.h b/arch/powerpc/sysdev/mpic.h
index 6209c62..3cef2af 100644
--- a/arch/powerpc/sysdev/mpic.h
+++ b/arch/powerpc/sysdev/mpic.h
@@ -36,6 +36,6 @@ static inline int mpic_pasemi_msi_init(struct mpic *mpic)
extern int mpic_set_irq_type(unsigned int virq, unsigned int flow_type);
extern void mpic_set_vector(unsigned int virq, unsigned int vector);
-extern void mpic_set_affinity(unsigned int irq, cpumask_t cpumask);
+extern void mpic_set_affinity(unsigned int irq, const struct cpumask *cpumask);
#endif /* _POWERPC_SYSDEV_MPIC_H */
--
cgit v1.1
From a5dae76a3d8012b0ce0ff04dfe6101339df49740 Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <avorontsov@ru.mvista.com>
Date: Fri, 5 Dec 2008 23:10:26 +0300
Subject: powerpc: Implement get_brgfreq() and get_baudrate() stubs
This is needed to not bother with ugly #ifdefs in the drivers.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/sysdev/fsl_soc.h | 5 +++++
1 file changed, 5 insertions(+)
(limited to 'arch/powerpc/sysdev')
diff --git a/arch/powerpc/sysdev/fsl_soc.h b/arch/powerpc/sysdev/fsl_soc.h
index 60f7f22..9c744e4 100644
--- a/arch/powerpc/sysdev/fsl_soc.h
+++ b/arch/powerpc/sysdev/fsl_soc.h
@@ -5,8 +5,13 @@
#include <asm/mmu.h>
extern phys_addr_t get_immrbase(void);
+#if defined(CONFIG_CPM2) || defined(CONFIG_QUICC_ENGINE) || defined(CONFIG_8xx)
extern u32 get_brgfreq(void);
extern u32 get_baudrate(void);
+#else
+static inline u32 get_brgfreq(void) { return -1; }
+static inline u32 get_baudrate(void) { return -1; }
+#endif
extern u32 fsl_get_sys_freq(void);
struct spi_board_info;
--
cgit v1.1
From 1b9e89046c31fd39d08742915b6bd72f6c239608 Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <avorontsov@ru.mvista.com>
Date: Wed, 3 Dec 2008 22:27:38 +0300
Subject: powerpc/qe: Implement QE Pin Multiplexing API
With this API we're able to set a QE pin to the GPIO mode or a dedicated
peripheral function.
The API relies on the fact that QE gpio controllers are registered. If
they aren't, the API won't work (gracefully though).
There is one caveat though: if anybody occupied the node->data before us,
or overwrote it, then bad things will happen. Luckily this is all in the
platform code that we fully control, so this should never happen.
I could implement more checks (for example we could create a list of
successfully registered QE controllers, and compare the node->data in the
qe_pin_request()), but this is unneeded if nobody is going to do silly
things behind our back.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/sysdev/qe_lib/gpio.c | 195 ++++++++++++++++++++++++++++++++++++++
1 file changed, 195 insertions(+)
(limited to 'arch/powerpc/sysdev')
diff --git a/arch/powerpc/sysdev/qe_lib/gpio.c b/arch/powerpc/sysdev/qe_lib/gpio.c
index 8e5a0bc..3485288 100644
--- a/arch/powerpc/sysdev/qe_lib/gpio.c
+++ b/arch/powerpc/sysdev/qe_lib/gpio.c
@@ -14,6 +14,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/spinlock.h>
+#include <linux/err.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
@@ -24,8 +25,14 @@ struct qe_gpio_chip {
struct of_mm_gpio_chip mm_gc;
spinlock_t lock;
+ unsigned long pin_flags[QE_PIO_PINS];
+#define QE_PIN_REQUESTED 0
+
/* shadowed data register to clear/set bits safely */
u32 cpdata;
+
+ /* saved_regs used to restore dedicated functions */
+ struct qe_pio_regs saved_regs;
};
static inline struct qe_gpio_chip *
@@ -40,6 +47,12 @@ static void qe_gpio_save_regs(struct of_mm_gpio_chip *mm_gc)
struct qe_pio_regs __iomem *regs = mm_gc->regs;
qe_gc->cpdata = in_be32(®s->cpdata);
+ qe_gc->saved_regs.cpdata = qe_gc->cpdata;
+ qe_gc->saved_regs.cpdir1 = in_be32(®s->cpdir1);
+ qe_gc->saved_regs.cpdir2 = in_be32(®s->cpdir2);
+ qe_gc->saved_regs.cppar1 = in_be32(®s->cppar1);
+ qe_gc->saved_regs.cppar2 = in_be32(®s->cppar2);
+ qe_gc->saved_regs.cpodr = in_be32(®s->cpodr);
}
static int qe_gpio_get(struct gpio_chip *gc, unsigned int gpio)
@@ -103,6 +116,188 @@ static int qe_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
return 0;
}
+struct qe_pin {
+ /*
+ * The qe_gpio_chip name is unfortunate, we should change that to
+ * something like qe_pio_controller. Someday.
+ */
+ struct qe_gpio_chip *controller;
+ int num;
+};
+
+/**
+ * qe_pin_request - Request a QE pin
+ * @np: device node to get a pin from
+ * @index: index of a pin in the device tree
+ * Context: non-atomic
+ *
+ * This function return qe_pin so that you could use it with the rest of
+ * the QE Pin Multiplexing API.
+ */
+struct qe_pin *qe_pin_request(struct device_node *np, int index)
+{
+ struct qe_pin *qe_pin;
+ struct device_node *gc;
+ struct of_gpio_chip *of_gc = NULL;
+ struct of_mm_gpio_chip *mm_gc;
+ struct qe_gpio_chip *qe_gc;
+ int err;
+ int size;
+ const void *gpio_spec;
+ const u32 *gpio_cells;
+ unsigned long flags;
+
+ qe_pin = kzalloc(sizeof(*qe_pin), GFP_KERNEL);
+ if (!qe_pin) {
+ pr_debug("%s: can't allocate memory\n", __func__);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ err = of_parse_phandles_with_args(np, "gpios", "#gpio-cells", index,
+ &gc, &gpio_spec);
+ if (err) {
+ pr_debug("%s: can't parse gpios property\n", __func__);
+ goto err0;
+ }
+
+ if (!of_device_is_compatible(gc, "fsl,mpc8323-qe-pario-bank")) {
+ pr_debug("%s: tried to get a non-qe pin\n", __func__);
+ err = -EINVAL;
+ goto err1;
+ }
+
+ of_gc = gc->data;
+ if (!of_gc) {
+ pr_debug("%s: gpio controller %s isn't registered\n",
+ np->full_name, gc->full_name);
+ err = -ENODEV;
+ goto err1;
+ }
+
+ gpio_cells = of_get_property(gc, "#gpio-cells", &size);
+ if (!gpio_cells || size != sizeof(*gpio_cells) ||
+ *gpio_cells != of_gc->gpio_cells) {
+ pr_debug("%s: wrong #gpio-cells for %s\n",
+ np->full_name, gc->full_name);
+ err = -EINVAL;
+ goto err1;
+ }
+
+ err = of_gc->xlate(of_gc, np, gpio_spec, NULL);
+ if (err < 0)
+ goto err1;
+
+ mm_gc = to_of_mm_gpio_chip(&of_gc->gc);
+ qe_gc = to_qe_gpio_chip(mm_gc);
+
+ spin_lock_irqsave(&qe_gc->lock, flags);
+
+ if (test_and_set_bit(QE_PIN_REQUESTED, &qe_gc->pin_flags[err]) == 0) {
+ qe_pin->controller = qe_gc;
+ qe_pin->num = err;
+ err = 0;
+ } else {
+ err = -EBUSY;
+ }
+
+ spin_unlock_irqrestore(&qe_gc->lock, flags);
+
+ if (!err)
+ return qe_pin;
+err1:
+ of_node_put(gc);
+err0:
+ kfree(qe_pin);
+ pr_debug("%s failed with status %d\n", __func__, err);
+ return ERR_PTR(err);
+}
+EXPORT_SYMBOL(qe_pin_request);
+
+/**
+ * qe_pin_free - Free a pin
+ * @qe_pin: pointer to the qe_pin structure
+ * Context: any
+ *
+ * This function frees the qe_pin structure and makes a pin available
+ * for further qe_pin_request() calls.
+ */
+void qe_pin_free(struct qe_pin *qe_pin)
+{
+ struct qe_gpio_chip *qe_gc = qe_pin->controller;
+ unsigned long flags;
+ const int pin = qe_pin->num;
+
+ spin_lock_irqsave(&qe_gc->lock, flags);
+ test_and_clear_bit(QE_PIN_REQUESTED, &qe_gc->pin_flags[pin]);
+ spin_unlock_irqrestore(&qe_gc->lock, flags);
+
+ kfree(qe_pin);
+}
+EXPORT_SYMBOL(qe_pin_free);
+
+/**
+ * qe_pin_set_dedicated - Revert a pin to a dedicated peripheral function mode
+ * @qe_pin: pointer to the qe_pin structure
+ * Context: any
+ *
+ * This function resets a pin to a dedicated peripheral function that
+ * has been set up by the firmware.
+ */
+void qe_pin_set_dedicated(struct qe_pin *qe_pin)
+{
+ struct qe_gpio_chip *qe_gc = qe_pin->controller;
+ struct qe_pio_regs __iomem *regs = qe_gc->mm_gc.regs;
+ struct qe_pio_regs *sregs = &qe_gc->saved_regs;
+ int pin = qe_pin->num;
+ u32 mask1 = 1 << (QE_PIO_PINS - (pin + 1));
+ u32 mask2 = 0x3 << (QE_PIO_PINS - (pin % (QE_PIO_PINS / 2) + 1) * 2);
+ bool second_reg = pin > (QE_PIO_PINS / 2) - 1;
+ unsigned long flags;
+
+ spin_lock_irqsave(&qe_gc->lock, flags);
+
+ if (second_reg) {
+ clrsetbits_be32(®s->cpdir2, mask2, sregs->cpdir2 & mask2);
+ clrsetbits_be32(®s->cppar2, mask2, sregs->cppar2 & mask2);
+ } else {
+ clrsetbits_be32(®s->cpdir1, mask2, sregs->cpdir1 & mask2);
+ clrsetbits_be32(®s->cppar1, mask2, sregs->cppar1 & mask2);
+ }
+
+ if (sregs->cpdata & mask1)
+ qe_gc->cpdata |= mask1;
+ else
+ qe_gc->cpdata &= ~mask1;
+
+ out_be32(®s->cpdata, qe_gc->cpdata);
+ clrsetbits_be32(®s->cpodr, mask1, sregs->cpodr & mask1);
+
+ spin_unlock_irqrestore(&qe_gc->lock, flags);
+}
+EXPORT_SYMBOL(qe_pin_set_dedicated);
+
+/**
+ * qe_pin_set_gpio - Set a pin to the GPIO mode
+ * @qe_pin: pointer to the qe_pin structure
+ * Context: any
+ *
+ * This function sets a pin to the GPIO mode.
+ */
+void qe_pin_set_gpio(struct qe_pin *qe_pin)
+{
+ struct qe_gpio_chip *qe_gc = qe_pin->controller;
+ struct qe_pio_regs __iomem *regs = qe_gc->mm_gc.regs;
+ unsigned long flags;
+
+ spin_lock_irqsave(&qe_gc->lock, flags);
+
+ /* Let's make it input by default, GPIO API is able to change that. */
+ __par_io_config_pin(regs, qe_pin->num, QE_PIO_DIR_IN, 0, 0, 0);
+
+ spin_unlock_irqrestore(&qe_gc->lock, flags);
+}
+EXPORT_SYMBOL(qe_pin_set_gpio);
+
static int __init qe_add_gpiochips(void)
{
struct device_node *np;
--
cgit v1.1
From 3d64de9c50619d32eb71d993d23a50b98d12d3c0 Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <avorontsov@ru.mvista.com>
Date: Thu, 18 Dec 2008 19:37:26 +0300
Subject: powerpc: Implement GPIO driver for simple memory-mapped banks
The driver supports very simple GPIO controllers, that is, when a
controller provides just a 'data' register. Such controllers may be
found in various BCSRs (Board's FPGAs used to control board's
switches, LEDs, chip-selects, Ethernet/USB PHY power, etc).
So far we support only 1-byte GPIO banks. Support for other widths may
be implemented when/if needed.
p.s.
To avoid "made up" compatible entries (like compatible = "simple-gpio"),
boards must call simple_gpiochip_init() to pass the compatible string.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/sysdev/Makefile | 1 +
arch/powerpc/sysdev/simple_gpio.c | 155 ++++++++++++++++++++++++++++++++++++++
arch/powerpc/sysdev/simple_gpio.h | 12 +++
3 files changed, 168 insertions(+)
create mode 100644 arch/powerpc/sysdev/simple_gpio.c
create mode 100644 arch/powerpc/sysdev/simple_gpio.h
(limited to 'arch/powerpc/sysdev')
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index 5afce11..b33b28a 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_FSL_PCI) += fsl_pci.o $(fsl-msi-obj-y)
obj-$(CONFIG_FSL_LBC) += fsl_lbc.o
obj-$(CONFIG_FSL_GTM) += fsl_gtm.o
obj-$(CONFIG_MPC8xxx_GPIO) += mpc8xxx_gpio.o
+obj-$(CONFIG_SIMPLE_GPIO) += simple_gpio.o
obj-$(CONFIG_RAPIDIO) += fsl_rio.o
obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o
obj-$(CONFIG_QUICC_ENGINE) += qe_lib/
diff --git a/arch/powerpc/sysdev/simple_gpio.c b/arch/powerpc/sysdev/simple_gpio.c
new file mode 100644
index 0000000..43c4569
--- /dev/null
+++ b/arch/powerpc/sysdev/simple_gpio.c
@@ -0,0 +1,155 @@
+/*
+ * Simple Memory-Mapped GPIOs
+ *
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/gpio.h>
+#include <asm/prom.h>
+#include "simple_gpio.h"
+
+struct u8_gpio_chip {
+ struct of_mm_gpio_chip mm_gc;
+ spinlock_t lock;
+
+ /* shadowed data register to clear/set bits safely */
+ u8 data;
+};
+
+static struct u8_gpio_chip *to_u8_gpio_chip(struct of_mm_gpio_chip *mm_gc)
+{
+ return container_of(mm_gc, struct u8_gpio_chip, mm_gc);
+}
+
+static u8 u8_pin2mask(unsigned int pin)
+{
+ return 1 << (8 - 1 - pin);
+}
+
+static int u8_gpio_get(struct gpio_chip *gc, unsigned int gpio)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+
+ return in_8(mm_gc->regs) & u8_pin2mask(gpio);
+}
+
+static void u8_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct u8_gpio_chip *u8_gc = to_u8_gpio_chip(mm_gc);
+ unsigned long flags;
+
+ spin_lock_irqsave(&u8_gc->lock, flags);
+
+ if (val)
+ u8_gc->data |= u8_pin2mask(gpio);
+ else
+ u8_gc->data &= ~u8_pin2mask(gpio);
+
+ out_8(mm_gc->regs, u8_gc->data);
+
+ spin_unlock_irqrestore(&u8_gc->lock, flags);
+}
+
+static int u8_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+ return 0;
+}
+
+static int u8_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+ u8_gpio_set(gc, gpio, val);
+ return 0;
+}
+
+static void u8_gpio_save_regs(struct of_mm_gpio_chip *mm_gc)
+{
+ struct u8_gpio_chip *u8_gc = to_u8_gpio_chip(mm_gc);
+
+ u8_gc->data = in_8(mm_gc->regs);
+}
+
+static int __init u8_simple_gpiochip_add(struct device_node *np)
+{
+ int ret;
+ struct u8_gpio_chip *u8_gc;
+ struct of_mm_gpio_chip *mm_gc;
+ struct of_gpio_chip *of_gc;
+ struct gpio_chip *gc;
+
+ u8_gc = kzalloc(sizeof(*u8_gc), GFP_KERNEL);
+ if (!u8_gc)
+ return -ENOMEM;
+
+ spin_lock_init(&u8_gc->lock);
+
+ mm_gc = &u8_gc->mm_gc;
+ of_gc = &mm_gc->of_gc;
+ gc = &of_gc->gc;
+
+ mm_gc->save_regs = u8_gpio_save_regs;
+ of_gc->gpio_cells = 2;
+ gc->ngpio = 8;
+ gc->direction_input = u8_gpio_dir_in;
+ gc->direction_output = u8_gpio_dir_out;
+ gc->get = u8_gpio_get;
+ gc->set = u8_gpio_set;
+
+ ret = of_mm_gpiochip_add(np, mm_gc);
+ if (ret)
+ goto err;
+ return 0;
+err:
+ kfree(u8_gc);
+ return ret;
+}
+
+void __init simple_gpiochip_init(const char *compatible)
+{
+ struct device_node *np;
+
+ for_each_compatible_node(np, NULL, compatible) {
+ int ret;
+ struct resource r;
+
+ ret = of_address_to_resource(np, 0, &r);
+ if (ret)
+ goto err;
+
+ switch (resource_size(&r)) {
+ case 1:
+ ret = u8_simple_gpiochip_add(np);
+ if (ret)
+ goto err;
+ break;
+ default:
+ /*
+ * Whenever you need support for GPIO bank width > 1,
+ * please just turn u8_ code into huge macros, and
+ * construct needed uX_ code with it.
+ */
+ ret = -ENOSYS;
+ goto err;
+ }
+ continue;
+err:
+ pr_err("%s: registration failed, status %d\n",
+ np->full_name, ret);
+ }
+}
diff --git a/arch/powerpc/sysdev/simple_gpio.h b/arch/powerpc/sysdev/simple_gpio.h
new file mode 100644
index 0000000..3a7b0c5
--- /dev/null
+++ b/arch/powerpc/sysdev/simple_gpio.h
@@ -0,0 +1,12 @@
+#ifndef __SYSDEV_SIMPLE_GPIO_H
+#define __SYSDEV_SIMPLE_GPIO_H
+
+#include <linux/errno.h>
+
+#ifdef CONFIG_SIMPLE_GPIO
+extern void simple_gpiochip_init(const char *compatible);
+#else
+static inline void simple_gpiochip_init(const char *compatible) {}
+#endif /* CONFIG_SIMPLE_GPIO */
+
+#endif /* __SYSDEV_SIMPLE_GPIO_H */
--
cgit v1.1
From c9dadffbe901bb1d5d54bffbd72ae4ee89a1e08b Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <avorontsov@ru.mvista.com>
Date: Mon, 29 Dec 2008 19:40:32 +0300
Subject: powerpc/fsl_pci: Fix sparse warnings
This patch fixes following sparse warnings:
CHECK fsl_pci.c
fsl_pci.c:32:13: warning: symbol 'setup_pci_atmu' was not declared. Should it be static?
fsl_pci.c:89:13: warning: symbol 'setup_pci_cmd' was not declared. Should it be static?
fsl_pci.c:133:12: warning: symbol 'fsl_pcie_check_link' was not declared. Should it be static?
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/sysdev/fsl_pci.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
(limited to 'arch/powerpc/sysdev')
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index d5f9ae0..f611d03 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -29,7 +29,8 @@
#if defined(CONFIG_PPC_85xx) || defined(CONFIG_PPC_86xx)
/* atmu setup for fsl pci/pcie controller */
-void __init setup_pci_atmu(struct pci_controller *hose, struct resource *rsrc)
+static void __init setup_pci_atmu(struct pci_controller *hose,
+ struct resource *rsrc)
{
struct ccsr_pci __iomem *pci;
int i;
@@ -86,7 +87,7 @@ void __init setup_pci_atmu(struct pci_controller *hose, struct resource *rsrc)
out_be32(&pci->piw[2].piwar, PIWAR_2G);
}
-void __init setup_pci_cmd(struct pci_controller *hose)
+static void __init setup_pci_cmd(struct pci_controller *hose)
{
u16 cmd;
int cap_x;
@@ -130,7 +131,7 @@ static void __init quirk_fsl_pcie_header(struct pci_dev *dev)
return ;
}
-int __init fsl_pcie_check_link(struct pci_controller *hose)
+static int __init fsl_pcie_check_link(struct pci_controller *hose)
{
u32 val;
early_read_config_dword(hose, 0, 0, PCIE_LTSSM, &val);
--
cgit v1.1
From 068e8c9d02ee37c44a4d65279b3ae8188fb09e18 Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <avorontsov@ru.mvista.com>
Date: Sat, 8 Nov 2008 20:52:54 +0300
Subject: powerpc/qe: Select QE_USB with USB_GADGET_FSL_QE
Boards should know when QE_USB is used, so that they can configure USB
clocks and pins.
Another option would be to add 'select QE_USB' into USB_GADGET_FSL_QE,
but selects are evil since they don't support dependencies.
While at it, also remove 'host' from the symbol description, since the
QE_USB code is used to support the gadget driver as well.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/sysdev/qe_lib/Kconfig | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
(limited to 'arch/powerpc/sysdev')
diff --git a/arch/powerpc/sysdev/qe_lib/Kconfig b/arch/powerpc/sysdev/qe_lib/Kconfig
index 76ffbc4..41ac3df 100644
--- a/arch/powerpc/sysdev/qe_lib/Kconfig
+++ b/arch/powerpc/sysdev/qe_lib/Kconfig
@@ -22,5 +22,6 @@ config UCC
config QE_USB
bool
+ default y if USB_GADGET_FSL_QE
help
- QE USB Host Controller support
+ QE USB Controller support
--
cgit v1.1
From e65e49d0f3714f4a6a42f6f6a19926ba33fcda75 Mon Sep 17 00:00:00 2001
From: Mike Travis <travis@sgi.com>
Date: Mon, 12 Jan 2009 15:27:13 -0800
Subject: irq: update all arches for new irq_desc
Impact: cleanup, update to new cpumask API
Irq_desc.affinity and irq_desc.pending_mask are now cpumask_var_t's
so access to them should be using the new cpumask API.
Signed-off-by: Mike Travis <travis@sgi.com>
---
arch/powerpc/sysdev/mpic.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
(limited to 'arch/powerpc/sysdev')
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 3e0d89d..0afd21f 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -566,9 +566,10 @@ static void __init mpic_scan_ht_pics(struct mpic *mpic)
#ifdef CONFIG_SMP
static int irq_choose_cpu(unsigned int virt_irq)
{
- cpumask_t mask = irq_desc[virt_irq].affinity;
+ cpumask_t mask;
int cpuid;
+ cpumask_copy(&mask, irq_desc[virt_irq].affinity);
if (cpus_equal(mask, CPU_MASK_ALL)) {
static int irq_rover;
static DEFINE_SPINLOCK(irq_rover_lock);
--
cgit v1.1