From cc5d0189b9ba95260857a5018a1c2fef90008507 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 13 Dec 2005 18:01:21 +1100 Subject: [PATCH] powerpc: Remove device_node addrs/n_addr The pre-parsed addrs/n_addrs fields in struct device_node are finally gone. Remove the dodgy heuristics that did that parsing at boot and remove the fields themselves since we now have a good replacement with the new OF parsing code. This patch also fixes a bunch of drivers to use the new code instead, so that at least pmac32, pseries, iseries and g5 defconfigs build. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/powermac/pic.c | 456 ++++++++++++++++++---------------- 1 file changed, 246 insertions(+), 210 deletions(-) (limited to 'arch/powerpc/platforms/powermac/pic.c') diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c index a36527c..dbb524a 100644 --- a/arch/powerpc/platforms/powermac/pic.c +++ b/arch/powerpc/platforms/powermac/pic.c @@ -5,8 +5,8 @@ * in a separate file * * Copyright (C) 1997 Paul Mackerras (paulus@samba.org) - * - * Maintained by Benjamin Herrenschmidt (benh@kernel.crashing.org) + * Copyright (C) 2005 Benjamin Herrenschmidt (benh@kernel.crashing.org) + * IBM, Corp. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -54,12 +54,7 @@ struct pmac_irq_hw { }; /* Default addresses */ -static volatile struct pmac_irq_hw *pmac_irq_hw[4] = { - (struct pmac_irq_hw *) 0xf3000020, - (struct pmac_irq_hw *) 0xf3000010, - (struct pmac_irq_hw *) 0xf4000020, - (struct pmac_irq_hw *) 0xf4000010, -}; +static volatile struct pmac_irq_hw __iomem *pmac_irq_hw[4]; #define GC_LEVEL_MASK 0x3ff00000 #define OHARE_LEVEL_MASK 0x1ff00000 @@ -82,8 +77,7 @@ static unsigned long ppc_lost_interrupts[NR_MASK_WORDS]; * since it can lose interrupts (see pmac_set_irq_mask). * -- Cort */ -void -__set_lost(unsigned long irq_nr, int nokick) +void __set_lost(unsigned long irq_nr, int nokick) { if (!test_and_set_bit(irq_nr, ppc_lost_interrupts)) { atomic_inc(&ppc_n_lost_interrupts); @@ -92,8 +86,7 @@ __set_lost(unsigned long irq_nr, int nokick) } } -static void -pmac_mask_and_ack_irq(unsigned int irq_nr) +static void pmac_mask_and_ack_irq(unsigned int irq_nr) { unsigned long bit = 1UL << (irq_nr & 0x1f); int i = irq_nr >> 5; @@ -224,8 +217,7 @@ static irqreturn_t gatwick_action(int cpl, void *dev_id, struct pt_regs *regs) return IRQ_NONE; } -int -pmac_get_irq(struct pt_regs *regs) +static int pmac_get_irq(struct pt_regs *regs) { int irq; unsigned long bits = 0; @@ -256,34 +248,40 @@ pmac_get_irq(struct pt_regs *regs) /* This routine will fix some missing interrupt values in the device tree * on the gatwick mac-io controller used by some PowerBooks + * + * Walking of OF nodes could use a bit more fixing up here, but it's not + * very important as this is all boot time code on static portions of the + * device-tree. + * + * However, the modifications done to "intrs" will have to be removed and + * replaced with proper updates of the "interrupts" properties or + * AAPL,interrupts, yet to be decided, once the dynamic parsing is there. */ -static void __init -pmac_fix_gatwick_interrupts(struct device_node *gw, int irq_base) +static void __init pmac_fix_gatwick_interrupts(struct device_node *gw, + int irq_base) { struct device_node *node; int count; memset(gatwick_int_pool, 0, sizeof(gatwick_int_pool)); - node = gw->child; count = 0; - while(node) - { + for (node = NULL; (node = of_get_next_child(gw, node)) != NULL;) { /* Fix SCC */ - if (strcasecmp(node->name, "escc") == 0) - if (node->child) { - if (node->child->n_intrs < 3) { - node->child->intrs = &gatwick_int_pool[count]; - count += 3; - } - node->child->n_intrs = 3; - node->child->intrs[0].line = 15+irq_base; - node->child->intrs[1].line = 4+irq_base; - node->child->intrs[2].line = 5+irq_base; - printk(KERN_INFO "irq: fixed SCC on second controller (%d,%d,%d)\n", - node->child->intrs[0].line, - node->child->intrs[1].line, - node->child->intrs[2].line); + if ((strcasecmp(node->name, "escc") == 0) && node->child) { + if (node->child->n_intrs < 3) { + node->child->intrs = &gatwick_int_pool[count]; + count += 3; } + node->child->n_intrs = 3; + node->child->intrs[0].line = 15+irq_base; + node->child->intrs[1].line = 4+irq_base; + node->child->intrs[2].line = 5+irq_base; + printk(KERN_INFO "irq: fixed SCC on gatwick" + " (%d,%d,%d)\n", + node->child->intrs[0].line, + node->child->intrs[1].line, + node->child->intrs[2].line); + } /* Fix media-bay & left SWIM */ if (strcasecmp(node->name, "media-bay") == 0) { struct device_node* ya_node; @@ -292,12 +290,11 @@ pmac_fix_gatwick_interrupts(struct device_node *gw, int irq_base) node->intrs = &gatwick_int_pool[count++]; node->n_intrs = 1; node->intrs[0].line = 29+irq_base; - printk(KERN_INFO "irq: fixed media-bay on second controller (%d)\n", - node->intrs[0].line); + printk(KERN_INFO "irq: fixed media-bay on gatwick" + " (%d)\n", node->intrs[0].line); ya_node = node->child; - while(ya_node) - { + while(ya_node) { if (strcasecmp(ya_node->name, "floppy") == 0) { if (ya_node->n_intrs < 2) { ya_node->intrs = &gatwick_int_pool[count]; @@ -323,7 +320,6 @@ pmac_fix_gatwick_interrupts(struct device_node *gw, int irq_base) ya_node = ya_node->sibling; } } - node = node->sibling; } if (count > 10) { printk("WARNING !! Gatwick interrupt pool overflow\n"); @@ -338,45 +334,41 @@ pmac_fix_gatwick_interrupts(struct device_node *gw, int irq_base) * controller. If we find this second ohare, set it up and fix the * interrupt value in the device tree for the ethernet chip. */ -static int __init enable_second_ohare(void) +static void __init enable_second_ohare(struct device_node *np) { unsigned char bus, devfn; unsigned short cmd; - unsigned long addr; - struct device_node *irqctrler = find_devices("pci106b,7"); struct device_node *ether; - if (irqctrler == NULL || irqctrler->n_addrs <= 0) - return -1; - addr = (unsigned long) ioremap(irqctrler->addrs[0].address, 0x40); - pmac_irq_hw[1] = (volatile struct pmac_irq_hw *)(addr + 0x20); - max_irqs = 64; - if (pci_device_from_OF_node(irqctrler, &bus, &devfn) == 0) { - struct pci_controller* hose = pci_find_hose_for_OF_device(irqctrler); - if (!hose) - printk(KERN_ERR "Can't find PCI hose for OHare2 !\n"); - else { - early_read_config_word(hose, bus, devfn, PCI_COMMAND, &cmd); - cmd |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER; - cmd &= ~PCI_COMMAND_IO; - early_write_config_word(hose, bus, devfn, PCI_COMMAND, cmd); + /* This code doesn't strictly belong here, it could be part of + * either the PCI initialisation or the feature code. It's kept + * here for historical reasons. + */ + if (pci_device_from_OF_node(np, &bus, &devfn) == 0) { + struct pci_controller* hose = + pci_find_hose_for_OF_device(np); + if (!hose) { + printk(KERN_ERR "Can't find PCI hose for OHare2 !\n"); + return; } + early_read_config_word(hose, bus, devfn, PCI_COMMAND, &cmd); + cmd |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER; + cmd &= ~PCI_COMMAND_IO; + early_write_config_word(hose, bus, devfn, PCI_COMMAND, cmd); } /* Fix interrupt for the modem/ethernet combo controller. The number - in the device tree (27) is bogus (correct for the ethernet-only - board but not the combo ethernet/modem board). - The real interrupt is 28 on the second controller -> 28+32 = 60. - */ - ether = find_devices("pci1011,14"); + * in the device tree (27) is bogus (correct for the ethernet-only + * board but not the combo ethernet/modem board). + * The real interrupt is 28 on the second controller -> 28+32 = 60. + */ + ether = of_find_node_by_name(NULL, "pci1011,14"); if (ether && ether->n_intrs > 0) { ether->intrs[0].line = 60; printk(KERN_INFO "irq: Fixed ethernet IRQ to %d\n", ether->intrs[0].line); } - - /* Return the interrupt number of the cascade */ - return irqctrler->intrs[0].line; + of_node_put(ether); } #ifdef CONFIG_XMON @@ -394,189 +386,233 @@ static struct irqaction gatwick_cascade_action = { .mask = CPU_MASK_NONE, .name = "cascade", }; -#endif /* CONFIG_PPC32 */ -static int pmac_u3_cascade(struct pt_regs *regs, void *data) +static void __init pmac_pic_probe_oldstyle(void) { - return mpic_get_one_irq((struct mpic *)data, regs); -} - -void __init pmac_pic_init(void) -{ - struct device_node *irqctrler = NULL; - struct device_node *irqctrler2 = NULL; - struct device_node *np; -#ifdef CONFIG_PPC32 int i; - unsigned long addr; int irq_cascade = -1; -#endif - struct mpic *mpic1, *mpic2; + struct device_node *master = NULL; + struct device_node *slave = NULL; + u8 __iomem *addr; + struct resource r; - /* We first try to detect Apple's new Core99 chipset, since mac-io - * is quite different on those machines and contains an IBM MPIC2. - */ - np = find_type_devices("open-pic"); - while (np) { - if (np->parent && !strcmp(np->parent->name, "u3")) - irqctrler2 = np; - else - irqctrler = np; - np = np->next; - } - if (irqctrler != NULL && irqctrler->n_addrs > 0) { - unsigned char senses[128]; - - printk(KERN_INFO "PowerMac using OpenPIC irq controller at 0x%08x\n", - (unsigned int)irqctrler->addrs[0].address); - pmac_call_feature(PMAC_FTR_ENABLE_MPIC, irqctrler, 0, 0); - - prom_get_irq_senses(senses, 0, 128); - mpic1 = mpic_alloc(irqctrler->addrs[0].address, - MPIC_PRIMARY | MPIC_WANTS_RESET, - 0, 0, 128, 252, senses, 128, " OpenPIC "); - BUG_ON(mpic1 == NULL); - mpic_init(mpic1); - - if (irqctrler2 != NULL && irqctrler2->n_intrs > 0 && - irqctrler2->n_addrs > 0) { - printk(KERN_INFO "Slave OpenPIC at 0x%08x hooked on IRQ %d\n", - (u32)irqctrler2->addrs[0].address, - irqctrler2->intrs[0].line); - - pmac_call_feature(PMAC_FTR_ENABLE_MPIC, irqctrler2, 0, 0); - prom_get_irq_senses(senses, 128, 128 + 124); - - /* We don't need to set MPIC_BROKEN_U3 here since we don't have - * hypertransport interrupts routed to it - */ - mpic2 = mpic_alloc(irqctrler2->addrs[0].address, - MPIC_BIG_ENDIAN | MPIC_WANTS_RESET, - 0, 128, 124, 0, senses, 124, - " U3-MPIC "); - BUG_ON(mpic2 == NULL); - mpic_init(mpic2); - mpic_setup_cascade(irqctrler2->intrs[0].line, - pmac_u3_cascade, mpic2); - } -#if defined(CONFIG_XMON) && defined(CONFIG_PPC32) - { - struct device_node* pswitch; - int nmi_irq; - - pswitch = find_devices("programmer-switch"); - if (pswitch && pswitch->n_intrs) { - nmi_irq = pswitch->intrs[0].line; - mpic_irq_set_priority(nmi_irq, 9); - setup_irq(nmi_irq, &xmon_action); - } - } -#endif /* defined(CONFIG_XMON) && defined(CONFIG_PPC32) */ - return; - } - irqctrler = NULL; + /* Set our get_irq function */ + ppc_md.get_irq = pmac_get_irq; -#ifdef CONFIG_PPC32 - /* Get the level/edge settings, assume if it's not - * a Grand Central nor an OHare, then it's an Heathrow - * (or Paddington). + /* + * Find the interrupt controller type & node */ - ppc_md.get_irq = pmac_get_irq; - if (find_devices("gc")) + + if ((master = of_find_node_by_name(NULL, "gc")) != NULL) { + max_irqs = max_real_irqs = 32; level_mask[0] = GC_LEVEL_MASK; - else if (find_devices("ohare")) { + } else if ((master = of_find_node_by_name(NULL, "ohare")) != NULL) { + max_irqs = max_real_irqs = 32; level_mask[0] = OHARE_LEVEL_MASK; + /* We might have a second cascaded ohare */ - level_mask[1] = OHARE_LEVEL_MASK; - } else { + slave = of_find_node_by_name(NULL, "pci106b,7"); + if (slave) { + max_irqs = 64; + level_mask[1] = OHARE_LEVEL_MASK; + enable_second_ohare(slave); + } + } else if ((master = of_find_node_by_name(NULL, "mac-io")) != NULL) { + max_irqs = max_real_irqs = 64; level_mask[0] = HEATHROW_LEVEL_MASK; level_mask[1] = 0; + /* We might have a second cascaded heathrow */ - level_mask[2] = HEATHROW_LEVEL_MASK; - level_mask[3] = 0; - } + slave = of_find_node_by_name(master, "mac-io"); + + /* Check ordering of master & slave */ + if (device_is_compatible(master, "gatwick")) { + struct device_node *tmp; + BUG_ON(slave == NULL); + tmp = master; + master = slave; + slave = tmp; + } - /* - * G3 powermacs and 1999 G3 PowerBooks have 64 interrupts, - * 1998 G3 Series PowerBooks have 128, - * other powermacs have 32. - * The combo ethernet/modem card for the Powerstar powerbooks - * (2400/3400/3500, ohare based) has a second ohare chip - * effectively making a total of 64. - */ - max_irqs = max_real_irqs = 32; - irqctrler = find_devices("mac-io"); - if (irqctrler) - { - max_real_irqs = 64; - if (irqctrler->next) + /* We found a slave */ + if (slave) { max_irqs = 128; - else - max_irqs = 64; + level_mask[2] = HEATHROW_LEVEL_MASK; + level_mask[3] = 0; + pmac_fix_gatwick_interrupts(slave, max_real_irqs); + } } + BUG_ON(master == NULL); + + /* Set the handler for the main PIC */ for ( i = 0; i < max_real_irqs ; i++ ) irq_desc[i].handler = &pmac_pic; - /* get addresses of first controller */ - if (irqctrler) { - if (irqctrler->n_addrs > 0) { - addr = (unsigned long) - ioremap(irqctrler->addrs[0].address, 0x40); - for (i = 0; i < 2; ++i) - pmac_irq_hw[i] = (volatile struct pmac_irq_hw*) - (addr + (2 - i) * 0x10); - } + /* Get addresses of first controller if we have a node for it */ + BUG_ON(of_address_to_resource(master, 0, &r)); - /* get addresses of second controller */ - irqctrler = irqctrler->next; - if (irqctrler && irqctrler->n_addrs > 0) { - addr = (unsigned long) - ioremap(irqctrler->addrs[0].address, 0x40); - for (i = 2; i < 4; ++i) - pmac_irq_hw[i] = (volatile struct pmac_irq_hw*) - (addr + (4 - i) * 0x10); - irq_cascade = irqctrler->intrs[0].line; - if (device_is_compatible(irqctrler, "gatwick")) - pmac_fix_gatwick_interrupts(irqctrler, max_real_irqs); - } - } else { - /* older powermacs have a GC (grand central) or ohare at - f3000000, with interrupt control registers at f3000020. */ - addr = (unsigned long) ioremap(0xf3000000, 0x40); - pmac_irq_hw[0] = (volatile struct pmac_irq_hw *) (addr + 0x20); + /* Map interrupts of primary controller */ + addr = (u8 __iomem *) ioremap(r.start, 0x40); + i = 0; + pmac_irq_hw[i++] = (volatile struct pmac_irq_hw __iomem *) + (addr + 0x20); + if (max_real_irqs > 32) + pmac_irq_hw[i++] = (volatile struct pmac_irq_hw __iomem *) + (addr + 0x10); + of_node_put(master); + + printk(KERN_INFO "irq: Found primary Apple PIC %s for %d irqs\n", + master->full_name, max_real_irqs); + + /* Map interrupts of cascaded controller */ + if (slave && !of_address_to_resource(slave, 0, &r)) { + addr = (u8 __iomem *)ioremap(r.start, 0x40); + pmac_irq_hw[i++] = (volatile struct pmac_irq_hw __iomem *) + (addr + 0x20); + if (max_irqs > 64) + pmac_irq_hw[i++] = + (volatile struct pmac_irq_hw __iomem *) + (addr + 0x10); + irq_cascade = slave->intrs[0].line; + + printk(KERN_INFO "irq: Found slave Apple PIC %s for %d irqs" + " cascade: %d\n", slave->full_name, + max_irqs - max_real_irqs, irq_cascade); } - - /* PowerBooks 3400 and 3500 can have a second controller in a second - ohare chip, on the combo ethernet/modem card */ - if (machine_is_compatible("AAPL,3400/2400") - || machine_is_compatible("AAPL,3500")) - irq_cascade = enable_second_ohare(); + of_node_put(slave); /* disable all interrupts in all controllers */ for (i = 0; i * 32 < max_irqs; ++i) out_le32(&pmac_irq_hw[i]->enable, 0); + /* mark level interrupts */ for (i = 0; i < max_irqs; i++) if (level_mask[i >> 5] & (1UL << (i & 0x1f))) irq_desc[i].status = IRQ_LEVEL; - /* get interrupt line of secondary interrupt controller */ - if (irq_cascade >= 0) { - printk(KERN_INFO "irq: secondary controller on irq %d\n", - (int)irq_cascade); + /* Setup handlers for secondary controller and hook cascade irq*/ + if (slave) { for ( i = max_real_irqs ; i < max_irqs ; i++ ) irq_desc[i].handler = &gatwick_pic; setup_irq(irq_cascade, &gatwick_cascade_action); } - printk("System has %d possible interrupts\n", max_irqs); - if (max_irqs != max_real_irqs) - printk(KERN_DEBUG "%d interrupts on main controller\n", - max_real_irqs); - + printk(KERN_INFO "irq: System has %d possible interrupts\n", max_irqs); #ifdef CONFIG_XMON setup_irq(20, &xmon_action); -#endif /* CONFIG_XMON */ -#endif /* CONFIG_PPC32 */ +#endif +} +#endif /* CONFIG_PPC32 */ + +static int pmac_u3_cascade(struct pt_regs *regs, void *data) +{ + return mpic_get_one_irq((struct mpic *)data, regs); +} + +static void __init pmac_pic_setup_mpic_nmi(struct mpic *mpic) +{ +#if defined(CONFIG_XMON) && defined(CONFIG_PPC32) + struct device_node* pswitch; + int nmi_irq; + + pswitch = of_find_node_by_name(NULL, "programmer-switch"); + if (pswitch && pswitch->n_intrs) { + nmi_irq = pswitch->intrs[0].line; + mpic_irq_set_priority(nmi_irq, 9); + setup_irq(nmi_irq, &xmon_action); + } + of_node_put(pswitch); +#endif /* defined(CONFIG_XMON) && defined(CONFIG_PPC32) */ +} + +static int __init pmac_pic_probe_mpic(void) +{ + struct mpic *mpic1, *mpic2; + struct device_node *np, *master = NULL, *slave = NULL; + unsigned char senses[128]; + struct resource r; + + /* We can have up to 2 MPICs cascaded */ + for (np = NULL; (np = of_find_node_by_type(np, "open-pic")) + != NULL;) { + if (master == NULL && + get_property(np, "interrupt-parent", NULL) != NULL) + master = of_node_get(np); + else if (slave == NULL) + slave = of_node_get(np); + if (master && slave) + break; + } + + /* Check for bogus setups */ + if (master == NULL && slave != NULL) { + master = slave; + slave = NULL; + } + + /* Not found, default to good old pmac pic */ + if (master == NULL) + return -ENODEV; + + /* Set master handler */ + ppc_md.get_irq = mpic_get_irq; + + /* Setup master */ + BUG_ON(of_address_to_resource(master, 0, &r)); + pmac_call_feature(PMAC_FTR_ENABLE_MPIC, master, 0, 0); + prom_get_irq_senses(senses, 0, 128); + mpic1 = mpic_alloc(r.start, MPIC_PRIMARY | MPIC_WANTS_RESET, + 0, 0, 128, 252, senses, 128, " OpenPIC "); + BUG_ON(mpic1 == NULL); + mpic_init(mpic1); + + /* Install NMI if any */ + pmac_pic_setup_mpic_nmi(mpic1); + + of_node_put(master); + + /* No slave, let's go out */ + if (slave == NULL || slave->n_intrs < 1) + return 0; + + /* Setup slave, failures are non-fatal */ + if (of_address_to_resource(slave, 0, &r)) { + printk(KERN_ERR "Can't get address of MPIC %s\n", + slave->full_name); + return 0; + } + pmac_call_feature(PMAC_FTR_ENABLE_MPIC, slave, 0, 0); + prom_get_irq_senses(senses, 128, 128 + 124); + + /* We don't need to set MPIC_BROKEN_U3 here since we don't have + * hypertransport interrupts routed to it, at least not on currently + * supported machines, that may change. + */ + mpic2 = mpic_alloc(r.start, MPIC_BIG_ENDIAN | MPIC_WANTS_RESET, + 0, 128, 124, 0, senses, 124, " U3-MPIC "); + if (mpic2 == NULL) { + printk(KERN_ERR "Can't create slave MPIC %s\n", + slave->full_name); + return 0; + } + mpic_init(mpic2); + mpic_setup_cascade(slave->intrs[0].line, pmac_u3_cascade, mpic2); + + of_node_put(slave); + return 0; +} + + +void __init pmac_pic_init(void) +{ + /* We first try to detect Apple's new Core99 chipset, since mac-io + * is quite different on those machines and contains an IBM MPIC2. + */ + if (pmac_pic_probe_mpic() == 0) + return; + +#ifdef CONFIG_PPC32 + pmac_pic_probe_oldstyle(); +#endif } #if defined(CONFIG_PM) && defined(CONFIG_PPC32) -- cgit v1.1