From 25431333813686654907ab987fb5de10c10a16db Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Thu, 7 Feb 2008 05:18:34 +1100 Subject: [POWERPC] bootwrapper: Build multiple cuImages Currently, the kernel uses CONFIG_DEVICE_TREE to wrap a kernel image with a fdt blob which means for any given configuration only one dts file can be selected and so support for only one board can be built This moves the selection of the default .dts file out of the kernel config and into the bootwrapper makefile. The makefile chooses which images to build based on the kernel config and the dts source file name is taken directly from the image name. For example "cuImage.ebony" will use "ebony.dts" as the device tree source file. In addition, this patch allows a specific image to be requested from the command line by adding "cuImage.%" and "treeImage.%" targets to the list of valid built targets in arch/powerpc/Makefile. This allows the default dts selection to be overridden. Another advantage to this change is it allows a single defconfig to be supplied for all boards using the same chip family and only differing in the device tree. Important note: This patch adds two new zImage targets; zImage.dtb.% and zImage.dtb.initrd.% for zImages with embedded dtb files. Currently there are 5 platforms which require this: ps3, ep405, mpc885ads, ep88xc, adder875-redboot and ep8248e. This patch *changes the zImage filenames* for those platforms. ie. 'zImage.ps3' is now 'zImage.dtb.ps3'. This new zImage.dtb targets were added so that the .dts file could be part of the dependancies list for building them. Signed-off-by: Grant Likely Signed-off-by: Paul Mackerras --- arch/powerpc/boot/Makefile | 126 +++++++++++++++++++++++++++------------------ 1 file changed, 77 insertions(+), 49 deletions(-) (limited to 'arch/powerpc/boot/Makefile') diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index 122a270..49797a4 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -60,8 +60,9 @@ src-wlib := string.S crt0.S stdio.c main.c \ src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c \ cuboot-ebony.c treeboot-ebony.c prpmc2800.c \ ps3-head.S ps3-hvcall.S ps3.c treeboot-bamboo.c cuboot-8xx.c \ - cuboot-pq2.c cuboot-sequoia.c treeboot-walnut.c cuboot-bamboo.c \ - fixed-head.S ep88xc.c cuboot-hpc2.c ep405.c cuboot-taishan.c \ + cuboot-pq2.c cuboot-sequoia.c treeboot-walnut.c \ + cuboot-bamboo.c cuboot-mpc7448hpc2.c cuboot-taishan.c \ + fixed-head.S ep88xc.c ep405.c \ cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \ cuboot-warp.c cuboot-85xx-cpm2.c src-boot := $(src-wlib) $(src-plat) empty.c @@ -123,6 +124,8 @@ targets += $(patsubst $(obj)/%,%,$(obj-boot) wrapper.a) extra-y := $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \ $(obj)/zImage.lds $(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds +dtstree := $(srctree)/$(src)/dts + wrapper :=$(srctree)/$(src)/wrapper wrapperbits := $(extra-y) $(addprefix $(obj)/,addnote hack-coff mktree dtc) \ $(wrapper) FORCE @@ -181,7 +184,7 @@ quiet_cmd_wrap = WRAP $@ image-$(CONFIG_PPC_PSERIES) += zImage.pseries image-$(CONFIG_PPC_MAPLE) += zImage.pseries image-$(CONFIG_PPC_IBM_CELL_BLADE) += zImage.pseries -image-$(CONFIG_PPC_PS3) += zImage.ps3 +image-$(CONFIG_PPC_PS3) += zImage-dtb.ps3 image-$(CONFIG_PPC_CELLEB) += zImage.pseries image-$(CONFIG_PPC_CHRP) += zImage.chrp image-$(CONFIG_PPC_EFIKA) += zImage.chrp @@ -191,33 +194,69 @@ image-$(CONFIG_PPC_PRPMC2800) += zImage.prpmc2800 image-$(CONFIG_PPC_ISERIES) += zImage.iseries image-$(CONFIG_DEFAULT_UIMAGE) += uImage -ifneq ($(CONFIG_DEVICE_TREE),"") -image-$(CONFIG_PPC_8xx) += cuImage.8xx -image-$(CONFIG_PPC_EP88XC) += zImage.ep88xc -image-$(CONFIG_EP405) += zImage.ep405 -image-$(CONFIG_8260) += cuImage.pq2 -image-$(CONFIG_EP8248E) += zImage.ep8248e -image-$(CONFIG_PPC_MPC52xx) += cuImage.52xx -image-$(CONFIG_STORCENTER) += cuImage.824x -image-$(CONFIG_PPC_83xx) += cuImage.83xx -image-$(CONFIG_PPC_85xx) += cuImage.85xx -ifeq ($(CONFIG_CPM2),y) -image-$(CONFIG_PPC_85xx) += cuImage.85xx-cpm2 -endif -image-$(CONFIG_MPC7448HPC2) += cuImage.hpc2 +# +# Targets which embed a device tree blob +# +# Theses are default targets to build images which embed device tree blobs. +# They are only required on boards which do not have FDT support in firmware. +# Boards with newish u-boot firmare can use the uImage target above +# + +# Board ports in arch/powerpc/platform/40x/Kconfig +image-$(CONFIG_EP405) += zImage-dtb.ep405 +image-$(CONFIG_WALNUT) += treeImage.walnut + +# Board ports in arch/powerpc/platform/44x/Kconfig image-$(CONFIG_EBONY) += treeImage.ebony cuImage.ebony image-$(CONFIG_BAMBOO) += treeImage.bamboo cuImage.bamboo image-$(CONFIG_SEQUOIA) += cuImage.sequoia image-$(CONFIG_RAINIER) += cuImage.rainier -image-$(CONFIG_WALNUT) += treeImage.walnut image-$(CONFIG_TAISHAN) += cuImage.taishan image-$(CONFIG_KATMAI) += cuImage.katmai image-$(CONFIG_WARP) += cuImage.warp -endif -ifneq ($(CONFIG_REDBOOT),"") -image-$(CONFIG_PPC_8xx) += zImage.redboot-8xx -endif +# Board ports in arch/powerpc/platform/8xx/Kconfig +image-$(CONFIG_PPC_MPC86XADS) += cuImage.mpc866ads +image-$(CONFIG_PPC_MPC885ADS) += cuImage.mpc885ads +image-$(CONFIG_PPC_EP88XC) += zImage-dtb.ep88xc +image-$(CONFIG_PPC_ADDER875) += cuImage.adder875-uboot \ + zImage-dtb.adder875-redboot + +# Board ports in arch/powerpc/platform/52xx/Kconfig +image-$(CONFIG_PPC_LITE5200) += cuImage.lite5200 cuImage.lite5200b + +# Board ports in arch/powerpc/platform/82xx/Kconfig +image-$(CONFIG_MPC8272_ADS) += cuImage.mpc8272ads +image-$(CONFIG_PQ2FADS) += cuImage.pq2fads +image-$(CONFIG_EP8248E) += zImage-dtb.ep8248e + +# Board ports in arch/powerpc/platform/83xx/Kconfig +image-$(CONFIG_MPC832x_MDS) += cuImage.mpc832x_mds +image-$(CONFIG_MPC832x_RDB) += cuImage.mpc832x_rdb +image-$(CONFIG_MPC834x_ITX) += cuImage.mpc8349emitx \ + cuImage.mpc8349emitxgp +image-$(CONFIG_MPC834x_MDS) += cuImage.mpc834x_mds +image-$(CONFIG_MPC836x_MDS) += cuImage.mpc836x_mds + +# Board ports in arch/powerpc/platform/85xx/Kconfig +image-$(CONFIG_MPC8540_ADS) += cuImage.mpc8540ads +image-$(CONFIG_MPC8560_ADS) += cuImage.mpc8560ads +image-$(CONFIG_MPC85xx_CDS) += cuImage.mpc8541cds \ + cuImage.mpc8548cds \ + cuImage.mpc8555cds +image-$(CONFIG_MPC85xx_MDS) += cuImage.mpc8568mds +image-$(CONFIG_MPC85xx_DS) += cuImage.mpc8544ds \ + cuImage.mpc8572ds +image-$(CONFIG_TQM8540) += cuImage.tqm8540 +image-$(CONFIG_TQM8541) += cuImage.tqm8541 +image-$(CONFIG_TQM8555) += cuImage.tqm8555 +image-$(CONFIG_TQM8560) += cuImage.tqm8560 +image-$(CONFIG_SBC8548) += cuImage.tqm8548 +image-$(CONFIG_SBC8560) += cuImage.tqm8560 + +# Board ports in arch/powerpc/platform/embedded6xx/Kconfig +image-$(CONFIG_STORCENTER) += cuImage.storcenter +image-$(CONFIG_MPC7448HPC2) += cuImage.mpc7448hpc2 # For 32-bit powermacs, build the COFF and miboot images # as well as the ELF images. @@ -233,24 +272,20 @@ targets += $(image-y) $(initrd-y) $(addprefix $(obj)/, $(initrd-y)): $(obj)/ramdisk.image.gz -# If CONFIG_WANT_DEVICE_TREE is set and CONFIG_DEVICE_TREE isn't an -# empty string, define 'dts' to be path to the dts -# CONFIG_DEVICE_TREE will have "" around it, make sure to strip them -ifeq ($(CONFIG_WANT_DEVICE_TREE),y) -ifneq ($(CONFIG_DEVICE_TREE),"") -dts = $(if $(shell echo $(CONFIG_DEVICE_TREE) | grep '^/'),\ - ,$(srctree)/$(src)/dts/)$(CONFIG_DEVICE_TREE:"%"=%) -endif -endif - # Don't put the ramdisk on the pattern rule; when its missing make will try # the pattern rule with less dependencies that also matches (even with the # hard dependency listed). -$(obj)/zImage.initrd.%: vmlinux $(wrapperbits) $(dts) - $(call if_changed,wrap,$*,$(dts),,$(obj)/ramdisk.image.gz) +$(obj)/zImage.initrd.%: vmlinux $(wrapperbits) + $(call if_changed,wrap,$*,,,$(obj)/ramdisk.image.gz) -$(obj)/zImage.%: vmlinux $(wrapperbits) $(dts) - $(call if_changed,wrap,$*,$(dts)) +$(obj)/zImage.%: vmlinux $(wrapperbits) + $(call if_changed,wrap,$*) + +$(obj)/zImage-dtb.initrd.%: vmlinux $(wrapperbits) $(dtstree)/%.dts + $(call if_changed,wrap,$*,$(dtstree)/$*.dts,,$(obj)/ramdisk.image.gz) + +$(obj)/zImage-dtb.%: vmlinux $(wrapperbits) $(dtstree)/%.dts + $(call if_changed,wrap,$*,$(dtstree)/$*.dts) # This cannot be in the root of $(src) as the zImage rule always adds a $(obj) # prefix @@ -260,24 +295,17 @@ $(obj)/vmlinux.strip: vmlinux $(obj)/zImage.iseries: vmlinux $(STRIP) -s -R .comment $< -o $@ -$(obj)/zImage.ps3: vmlinux $(wrapper) $(wrapperbits) $(srctree)/$(src)/dts/ps3.dts - $(STRIP) -s -R .comment $< -o vmlinux.strip - $(call cmd,wrap,ps3,$(srctree)/$(src)/dts/ps3.dts,,) - -$(obj)/zImage.initrd.ps3: vmlinux $(wrapper) $(wrapperbits) $(srctree)/$(src)/dts/ps3.dts $(obj)/ramdisk.image.gz - $(call cmd,wrap,ps3,$(srctree)/$(src)/dts/ps3.dts,,$(obj)/ramdisk.image.gz) - $(obj)/uImage: vmlinux $(wrapperbits) $(call if_changed,wrap,uboot) -$(obj)/cuImage.%: vmlinux $(dts) $(wrapperbits) - $(call if_changed,wrap,cuboot-$*,$(dts)) +$(obj)/cuImage.%: vmlinux $(dtstree)/%.dts $(wrapperbits) + $(call if_changed,wrap,cuboot-$*,$(dtstree)/$*.dts) -$(obj)/treeImage.initrd.%: vmlinux $(dts) $(wrapperbits) - $(call if_changed,wrap,treeboot-$*,$(dts),,$(obj)/ramdisk.image.gz) +$(obj)/treeImage.initrd.%: vmlinux $(dtstree)/%.dts $(wrapperbits) + $(call if_changed,wrap,treeboot-$*,$(dtstree)/$*.dts,,$(obj)/ramdisk.image.gz) -$(obj)/treeImage.%: vmlinux $(dts) $(wrapperbits) - $(call if_changed,wrap,treeboot-$*,$(dts)) +$(obj)/treeImage.%: vmlinux $(dtstree)/%.dts $(wrapperbits) + $(call if_changed,wrap,treeboot-$*,$(dtstree)/$*.dts) # If there isn't a platform selected then just strip the vmlinux. ifeq (,$(image-y)) -- cgit v1.1