From 9c1b013a3951671e219c32ca056fc07381a9e113 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Tue, 11 May 2010 11:20:09 +0200 Subject: MIPS: AR7: use ar7_has_high_vlynq() to determine watchdog base address Instead of doing yet another switch/case on the chip_id, use existing inline function to set the watchdog base address. Signed-off-by: Florian Fainelli To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1211/ Signed-off-by: Ralf Baechle --- arch/mips/ar7/platform.c | 15 +++------------ 1 file changed, 3 insertions(+), 12 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/ar7/platform.c b/arch/mips/ar7/platform.c index 2fafc78..1d4a466 100644 --- a/arch/mips/ar7/platform.c +++ b/arch/mips/ar7/platform.c @@ -576,7 +576,6 @@ static int __init ar7_register_devices(void) { void __iomem *bootcr; u32 val; - u16 chip_id; int res; res = ar7_register_uarts(); @@ -635,18 +634,10 @@ static int __init ar7_register_devices(void) val = readl(bootcr); iounmap(bootcr); if (val & AR7_WDT_HW_ENA) { - chip_id = ar7_chip_id(); - switch (chip_id) { - case AR7_CHIP_7100: - case AR7_CHIP_7200: - ar7_wdt_res.start = AR7_REGS_WDT; - break; - case AR7_CHIP_7300: + if (ar7_has_high_vlynq()) ar7_wdt_res.start = UR8_REGS_WDT; - break; - default: - break; - } + else + ar7_wdt_res.start = AR7_REGS_WDT; ar7_wdt_res.end = ar7_wdt_res.start + 0x20; res = platform_device_register(&ar7_wdt); -- cgit v1.1