From c764583f40b8d3cde3a3a0b4a40a7d2fa3987bed Mon Sep 17 00:00:00 2001
From: Paul Burton <paul.burton@imgtec.com>
Date: Fri, 26 Aug 2016 15:17:41 +0100
Subject: MIPS: SEAD3: Use register-bit-led driver via DT for LEDs

Probe a driver for the PLED & FLED LEDs found on the SEAD3 board using
the register-bit-led driver via device tree, rather than a custom driver
via platform code. Enable support for the register-bit-led driver & its
prerequisite syscon in sead3_defconfig.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Jacek Anaszewski <j.anaszewski@samsung.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14054/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/boot/dts/mti/sead3.dts | 103 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 103 insertions(+)

(limited to 'arch/mips/boot')

diff --git a/arch/mips/boot/dts/mti/sead3.dts b/arch/mips/boot/dts/mti/sead3.dts
index 8844cc0..0159450 100644
--- a/arch/mips/boot/dts/mti/sead3.dts
+++ b/arch/mips/boot/dts/mti/sead3.dts
@@ -93,6 +93,109 @@
 		};
 	};
 
+	system-controller@1f000200 {
+		compatible = "mti,sead3-cpld", "syscon", "simple-mfd";
+		reg = <0x1f000200 0x300>;
+
+		led@10.0 {
+			compatible = "register-bit-led";
+			offset = <0x10>;
+			mask = <0x1>;
+			label = "pled0";
+		};
+		led@10.1 {
+			compatible = "register-bit-led";
+			offset = <0x10>;
+			mask = <0x2>;
+			label = "pled1";
+		};
+		led@10.2 {
+			compatible = "register-bit-led";
+			offset = <0x10>;
+			mask = <0x4>;
+			label = "pled2";
+		};
+		led@10.3 {
+			compatible = "register-bit-led";
+			offset = <0x10>;
+			mask = <0x8>;
+			label = "pled3";
+		};
+		led@10.4 {
+			compatible = "register-bit-led";
+			offset = <0x10>;
+			mask = <0x10>;
+			label = "pled4";
+		};
+		led@10.5 {
+			compatible = "register-bit-led";
+			offset = <0x10>;
+			mask = <0x20>;
+			label = "pled5";
+		};
+		led@10.6 {
+			compatible = "register-bit-led";
+			offset = <0x10>;
+			mask = <0x40>;
+			label = "pled6";
+		};
+		led@10.7 {
+			compatible = "register-bit-led";
+			offset = <0x10>;
+			mask = <0x80>;
+			label = "pled7";
+		};
+
+		led@18.0 {
+			compatible = "register-bit-led";
+			offset = <0x18>;
+			mask = <0x1>;
+			label = "fled0";
+		};
+		led@18.1 {
+			compatible = "register-bit-led";
+			offset = <0x18>;
+			mask = <0x2>;
+			label = "fled1";
+		};
+		led@18.2 {
+			compatible = "register-bit-led";
+			offset = <0x18>;
+			mask = <0x4>;
+			label = "fled2";
+		};
+		led@18.3 {
+			compatible = "register-bit-led";
+			offset = <0x18>;
+			mask = <0x8>;
+			label = "fled3";
+		};
+		led@18.4 {
+			compatible = "register-bit-led";
+			offset = <0x18>;
+			mask = <0x10>;
+			label = "fled4";
+		};
+		led@18.5 {
+			compatible = "register-bit-led";
+			offset = <0x18>;
+			mask = <0x20>;
+			label = "fled5";
+		};
+		led@18.6 {
+			compatible = "register-bit-led";
+			offset = <0x18>;
+			mask = <0x40>;
+			label = "fled6";
+		};
+		led@18.7 {
+			compatible = "register-bit-led";
+			offset = <0x18>;
+			mask = <0x80>;
+			label = "fled7";
+		};
+	};
+
 	/* UART connected to FTDI & miniUSB socket */
 	uart0: uart@1f000900 {
 		compatible = "ns16550a";
-- 
cgit v1.1